1 files changed, 49 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0912-dt-dtoverlays-ov5647-Add-parameter-to-set-camera-mod.patch b/target/linux/bcm27xx/patches-5.4/950-0912-dt-dtoverlays-ov5647-Add-parameter-to-set-camera-mod.patch
new file mode 100644
index 0000000000..23a2fb9c26
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.4/950-0912-dt-dtoverlays-ov5647-Add-parameter-to-set-camera-mod.patch
@@ -0,0 +1,49 @@
+From 7d2efa734da00de05c8a58688da28cf1e380ef3a Mon Sep 17 00:00:00 2001
+From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+Date: Sat, 4 Jul 2020 03:04:38 +0300
+Subject: [PATCH] dt/dtoverlays: ov5647: Add parameter to set camera
+ module rotation
+
+Add a rotation DT overlay parameter to allow specifying the camera
+module mounting rotation.
+
+Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+---
+ arch/arm/boot/dts/overlays/README             | 5 +++--
+ arch/arm/boot/dts/overlays/ov5647-overlay.dts | 6 ++++++
+ 2 files changed, 9 insertions(+), 2 deletions(-)
+
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -1809,8 +1809,9 @@ Name:   ov5647
+ Info:   Omnivision OV5647 camera module.
+         Uses Unicam 1, which is the standard camera connector on most Pi
+         variants.
+-Load:   dtoverlay=ov5647
+-Params: <None>
++Load:   dtoverlay=ov5647,<param>=<val>
++Params: rotation                Mounting rotation of the camera sensor (0 or
++                                180, default 0)
+ 
+ 
+ Name:   ov7251
+--- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts
++++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts
+@@ -21,6 +21,8 @@
+ 				pwdn-gpios = <&gpio 41 1>, <&gpio 32 1>;
+ 				clocks = <&ov5647_clk>;
+ 
++				rotation = <0>;
++
+ 				port {
+ 					ov5647_0: endpoint {
+ 						remote-endpoint = <&csi1_ep>;
+@@ -83,4 +85,8 @@
+ 			};
+ 		};
+ 	};
++
++	__overrides__ {
++		rotation = <&ov5647>,"rotation:0";
++	};
+ };