diff options
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0914-dt-dtoverlays-imx477-Add-parameter-to-set-camera-mod.patch')
| -rw-r--r-- | target/linux/bcm27xx/patches-5.4/950-0914-dt-dtoverlays-imx477-Add-parameter-to-set-camera-mod.patch | 50 |
1 files changed, 50 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0914-dt-dtoverlays-imx477-Add-parameter-to-set-camera-mod.patch b/target/linux/bcm27xx/patches-5.4/950-0914-dt-dtoverlays-imx477-Add-parameter-to-set-camera-mod.patch new file mode 100644 index 0000000000..11a5d3da98 --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0914-dt-dtoverlays-imx477-Add-parameter-to-set-camera-mod.patch @@ -0,0 +1,50 @@ +From afed51afadb2f5d43e093c969bdf6535b2ea0ad3 Mon Sep 17 00:00:00 2001 +From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> +Date: Sat, 4 Jul 2020 03:04:38 +0300 +Subject: [PATCH] dt/dtoverlays: imx477: Add parameter to set camera + module rotation + +Add a rotation DT overlay parameter to allow specifying the camera +module mounting rotation. Set the default rotation to 180 as the module +is typically mounted upside-down. + +Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> +--- + arch/arm/boot/dts/overlays/README | 5 +++-- + arch/arm/boot/dts/overlays/imx477-overlay.dts | 6 ++++++ + 2 files changed, 9 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1458,8 +1458,9 @@ Name: imx477 + Info: Sony IMX477 camera module. + Uses Unicam 1, which is the standard camera connector on most Pi + variants. +-Load: dtoverlay=imx477 +-Params: <None> ++Load: dtoverlay=imx477,<param>=<val> ++Params: rotation Mounting rotation of the camera sensor (0 or ++ 180, default 180) + + + Name: iqaudio-codec +--- a/arch/arm/boot/dts/overlays/imx477-overlay.dts ++++ b/arch/arm/boot/dts/overlays/imx477-overlay.dts +@@ -27,6 +27,8 @@ + VDIG-supply = <&imx477_vdig>; /* 1.05v */ + VDDL-supply = <&imx477_vddl>; /* 1.8v */ + ++ rotation = <180>; ++ + port { + imx477_0: endpoint { + remote-endpoint = <&csi1_ep>; +@@ -110,4 +112,8 @@ + cam0-pwdn = <&imx477_vana>,"gpio:4"; + }; + }; ++ ++ __overrides__ { ++ rotation = <&imx477>,"rotation:0"; ++ }; + }; |