aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0437-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0437-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0437-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch367
1 files changed, 367 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0437-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch b/target/linux/brcm2708/patches-4.19/950-0437-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch
new file mode 100644
index 0000000000..37bb4fd61e
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0437-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch
@@ -0,0 +1,367 @@
+From 9542646d9211ab4305beb75da97f61cc1968ae6c Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Tue, 28 May 2019 16:36:04 +0100
+Subject: [PATCH] BCM270X_DT: Rename Pi Zero W DT files
+
+The downtream Pi Zero W dts file uses the digit 0, whereas upstream
+chose to spell it out - "zero-w". The firmware has, for a long time,
+looked for bcm2708-rpi-zero-w.dtb first before falling back to the
+numerical version. Therefore it is better to follow upstream and
+make the switch to "bcm2708-rpi-zero-w".
+
+At the same time, remove some overrides that duplicate values
+inherited from the shared .dtsi files.
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ arch/arm/boot/dts/Makefile | 2 +-
+ .../boot/dts/{bcm2708-rpi-0-w.dts => bcm2708-rpi-zero-w.dts} | 5 -----
+ 2 files changed, 1 insertion(+), 6 deletions(-)
+ rename arch/arm/boot/dts/{bcm2708-rpi-0-w.dts => bcm2708-rpi-zero-w.dts} (97%)
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -4,7 +4,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
+ bcm2708-rpi-b.dtb \
+ bcm2708-rpi-b-plus.dtb \
+ bcm2708-rpi-cm.dtb \
+- bcm2708-rpi-0-w.dtb \
++ bcm2708-rpi-zero-w.dtb \
+ bcm2709-rpi-2-b.dtb \
+ bcm2710-rpi-3-b.dtb \
+ bcm2710-rpi-3-b-plus.dtb \
+--- a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts
++++ /dev/null
+@@ -1,167 +0,0 @@
+-/dts-v1/;
+-
+-#include "bcm2708.dtsi"
+-#include "bcm283x-rpi-csi1-2lane.dtsi"
+-
+-/ {
+- compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
+- model = "Raspberry Pi Zero W";
+-
+- chosen {
+- bootargs = "coherent_pool=1M 8250.nr_uarts=1";
+- };
+-
+- aliases {
+- serial0 = &uart1;
+- serial1 = &uart0;
+- mmc1 = &mmcnr;
+- };
+-};
+-
+-&gpio {
+- spi0_pins: spi0_pins {
+- brcm,pins = <9 10 11>;
+- brcm,function = <4>; /* alt0 */
+- };
+-
+- spi0_cs_pins: spi0_cs_pins {
+- brcm,pins = <8 7>;
+- brcm,function = <1>; /* output */
+- };
+-
+- i2c0_pins: i2c0 {
+- brcm,pins = <0 1>;
+- brcm,function = <4>;
+- };
+-
+- i2c1_pins: i2c1 {
+- brcm,pins = <2 3>;
+- brcm,function = <4>;
+- };
+-
+- i2s_pins: i2s {
+- brcm,pins = <18 19 20 21>;
+- brcm,function = <4>; /* alt0 */
+- };
+-
+- sdio_pins: sdio_pins {
+- brcm,pins = <34 35 36 37 38 39>;
+- brcm,function = <7>; /* ALT3 = SD1 */
+- brcm,pull = <0 2 2 2 2 2>;
+- };
+-
+- bt_pins: bt_pins {
+- brcm,pins = <43>;
+- brcm,function = <4>; /* alt0:GPCLK2 */
+- brcm,pull = <0>; /* none */
+- };
+-
+- uart0_pins: uart0_pins {
+- brcm,pins = <30 31 32 33>;
+- brcm,function = <7>; /* alt3=UART0 */
+- brcm,pull = <2 0 0 2>; /* up none none up */
+- };
+-
+- uart1_pins: uart1_pins {
+- brcm,pins;
+- brcm,function;
+- brcm,pull;
+- };
+-
+- audio_pins: audio_pins {
+- brcm,pins = <>;
+- brcm,function = <>;
+- };
+-};
+-
+-&mmcnr {
+- pinctrl-names = "default";
+- pinctrl-0 = <&sdio_pins>;
+- bus-width = <4>;
+- status = "okay";
+-};
+-
+-&uart0 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&uart0_pins &bt_pins>;
+- status = "okay";
+-};
+-
+-&uart1 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&uart1_pins>;
+- status = "okay";
+-};
+-
+-&spi0 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
+- cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+-
+- spidev0: spidev@0{
+- compatible = "spidev";
+- reg = <0>; /* CE0 */
+- #address-cells = <1>;
+- #size-cells = <0>;
+- spi-max-frequency = <125000000>;
+- };
+-
+- spidev1: spidev@1{
+- compatible = "spidev";
+- reg = <1>; /* CE1 */
+- #address-cells = <1>;
+- #size-cells = <0>;
+- spi-max-frequency = <125000000>;
+- };
+-};
+-
+-&i2c0 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&i2c0_pins>;
+- clock-frequency = <100000>;
+-};
+-
+-&i2c1 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&i2c1_pins>;
+- clock-frequency = <100000>;
+-};
+-
+-&i2c2 {
+- clock-frequency = <100000>;
+-};
+-
+-&i2s {
+- #sound-dai-cells = <0>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&i2s_pins>;
+-};
+-
+-&random {
+- status = "okay";
+-};
+-
+-&leds {
+- act_led: act {
+- label = "led0";
+- linux,default-trigger = "mmc0";
+- gpios = <&gpio 47 0>;
+- };
+-};
+-
+-&hdmi {
+- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+-};
+-
+-&audio {
+- pinctrl-names = "default";
+- pinctrl-0 = <&audio_pins>;
+-};
+-
+-/ {
+- __overrides__ {
+- act_led_gpio = <&act_led>,"gpios:4";
+- act_led_activelow = <&act_led>,"gpios:8";
+- act_led_trigger = <&act_led>,"linux,default-trigger";
+- };
+-};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts
+@@ -0,0 +1,162 @@
++/dts-v1/;
++
++#include "bcm2708.dtsi"
++#include "bcm283x-rpi-csi1-2lane.dtsi"
++
++/ {
++ compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
++ model = "Raspberry Pi Zero W";
++
++ chosen {
++ bootargs = "coherent_pool=1M 8250.nr_uarts=1";
++ };
++
++ aliases {
++ serial0 = &uart1;
++ serial1 = &uart0;
++ mmc1 = &mmcnr;
++ };
++};
++
++&gpio {
++ spi0_pins: spi0_pins {
++ brcm,pins = <9 10 11>;
++ brcm,function = <4>; /* alt0 */
++ };
++
++ spi0_cs_pins: spi0_cs_pins {
++ brcm,pins = <8 7>;
++ brcm,function = <1>; /* output */
++ };
++
++ i2c0_pins: i2c0 {
++ brcm,pins = <0 1>;
++ brcm,function = <4>;
++ };
++
++ i2c1_pins: i2c1 {
++ brcm,pins = <2 3>;
++ brcm,function = <4>;
++ };
++
++ i2s_pins: i2s {
++ brcm,pins = <18 19 20 21>;
++ brcm,function = <4>; /* alt0 */
++ };
++
++ sdio_pins: sdio_pins {
++ brcm,pins = <34 35 36 37 38 39>;
++ brcm,function = <7>; /* ALT3 = SD1 */
++ brcm,pull = <0 2 2 2 2 2>;
++ };
++
++ bt_pins: bt_pins {
++ brcm,pins = <43>;
++ brcm,function = <4>; /* alt0:GPCLK2 */
++ brcm,pull = <0>; /* none */
++ };
++
++ uart0_pins: uart0_pins {
++ brcm,pins = <30 31 32 33>;
++ brcm,function = <7>; /* alt3=UART0 */
++ brcm,pull = <2 0 0 2>; /* up none none up */
++ };
++
++ uart1_pins: uart1_pins {
++ brcm,pins;
++ brcm,function;
++ brcm,pull;
++ };
++
++ audio_pins: audio_pins {
++ brcm,pins = <>;
++ brcm,function = <>;
++ };
++};
++
++&mmcnr {
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdio_pins>;
++ bus-width = <4>;
++ status = "okay";
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins &bt_pins>;
++ status = "okay";
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart1_pins>;
++ status = "okay";
++};
++
++&spi0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
++
++ spidev0: spidev@0{
++ compatible = "spidev";
++ reg = <0>; /* CE0 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ };
++
++ spidev1: spidev@1{
++ compatible = "spidev";
++ reg = <1>; /* CE1 */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ spi-max-frequency = <125000000>;
++ };
++};
++
++&i2c0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0_pins>;
++ clock-frequency = <100000>;
++};
++
++&i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins>;
++ clock-frequency = <100000>;
++};
++
++&i2c2 {
++ clock-frequency = <100000>;
++};
++
++&i2s {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2s_pins>;
++};
++
++&leds {
++ act_led: act {
++ label = "led0";
++ linux,default-trigger = "mmc0";
++ gpios = <&gpio 47 0>;
++ };
++};
++
++&hdmi {
++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
++};
++
++&audio {
++ pinctrl-names = "default";
++ pinctrl-0 = <&audio_pins>;
++};
++
++/ {
++ __overrides__ {
++ act_led_gpio = <&act_led>,"gpios:4";
++ act_led_activelow = <&act_led>,"gpios:8";
++ act_led_trigger = <&act_led>,"linux,default-trigger";
++ };
++};