aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0456-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0456-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0456-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch1187
1 files changed, 1187 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0456-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch b/target/linux/brcm2708/patches-4.19/950-0456-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch
new file mode 100644
index 0000000000..88431e2aca
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0456-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch
@@ -0,0 +1,1187 @@
+From ac1212c0f8b611be6df28f252ebbad80b775ee0f Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Tue, 19 Feb 2019 22:06:59 +0000
+Subject: [PATCH] PCI: brcmstb: Add Broadcom STB PCIe host controller
+ driver
+
+This commit adds the basic Broadcom STB PCIe controller. Missing is
+the ability to process MSI and also handle dma-ranges for inbound
+memory accesses. These two functionalities are added in subsequent
+commits.
+
+The PCIe block contains an MDIO interface. This is a local interface
+only accessible by the PCIe controller. It cannot be used or shared
+by any other HW. As such, the small amount of code for this
+controller is included in this driver as there is little upside to put
+it elsewhere.
+
+Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
+---
+ drivers/pci/controller/Kconfig | 9 +
+ drivers/pci/controller/Makefile | 2 +-
+ drivers/pci/controller/pcie-brcmstb.c | 1097 +++++++++++++++++++++++++
+ include/soc/brcmstb/memory_api.h | 25 +
+ 4 files changed, 1132 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/pci/controller/pcie-brcmstb.c
+ create mode 100644 include/soc/brcmstb/memory_api.h
+
+--- a/drivers/pci/controller/Kconfig
++++ b/drivers/pci/controller/Kconfig
+@@ -278,5 +278,14 @@ config VMD
+ To compile this driver as a module, choose M here: the
+ module will be called vmd.
+
++config PCIE_BRCMSTB
++ tristate "Broadcom Brcmstb PCIe platform host driver"
++ depends on ARCH_BRCMSTB || BMIPS_GENERIC
++ depends on OF
++ depends on SOC_BRCMSTB
++ default ARCH_BRCMSTB || BMIPS_GENERIC
++ help
++ Adds support for Broadcom Settop Box PCIe host controller.
++
+ source "drivers/pci/controller/dwc/Kconfig"
+ endmenu
+--- a/drivers/pci/controller/Makefile
++++ b/drivers/pci/controller/Makefile
+@@ -28,11 +28,11 @@ obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie
+ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
+ obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
+ obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
++obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
+ obj-$(CONFIG_VMD) += vmd.o
+ # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
+ obj-y += dwc/
+
+-
+ # The following drivers are for devices that use the generic ACPI
+ # pci_root.c driver but don't support standard ECAM config access.
+ # They contain MCFG quirks to replace the generic ECAM accessors with
+--- /dev/null
++++ b/drivers/pci/controller/pcie-brcmstb.c
+@@ -0,0 +1,1097 @@
++// SPDX-License-Identifier: GPL-2.0
++/* Copyright (C) 2009 - 2017 Broadcom */
++
++#include <linux/clk.h>
++#include <linux/compiler.h>
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/ioport.h>
++#include <linux/irqdomain.h>
++#include <linux/kernel.h>
++#include <linux/list.h>
++#include <linux/log2.h>
++#include <linux/module.h>
++#include <linux/of_address.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
++#include <linux/of_platform.h>
++#include <linux/pci.h>
++#include <linux/printk.h>
++#include <linux/sizes.h>
++#include <linux/slab.h>
++#include <soc/brcmstb/memory_api.h>
++#include <linux/string.h>
++#include <linux/types.h>
++#include "../pci.h"
++
++/* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */
++#define BRCM_PCIE_CAP_REGS 0x00ac
++
++/*
++ * Broadcom Settop Box PCIe Register Offsets. The names are from
++ * the chip's RDB and we use them here so that a script can correlate
++ * this code and the RDB to prevent discrepancies.
++ */
++#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1 0x0188
++#define PCIE_RC_CFG_PRIV1_ID_VAL3 0x043c
++#define PCIE_RC_DL_MDIO_ADDR 0x1100
++#define PCIE_RC_DL_MDIO_WR_DATA 0x1104
++#define PCIE_RC_DL_MDIO_RD_DATA 0x1108
++#define PCIE_MISC_MISC_CTRL 0x4008
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO 0x400c
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI 0x4010
++#define PCIE_MISC_RC_BAR1_CONFIG_LO 0x402c
++#define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034
++#define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038
++#define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c
++#define PCIE_MISC_PCIE_CTRL 0x4064
++#define PCIE_MISC_PCIE_STATUS 0x4068
++#define PCIE_MISC_REVISION 0x406c
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT 0x4070
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI 0x4080
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084
++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204
++#define PCIE_INTR2_CPU_BASE 0x4300
++
++/*
++ * Broadcom Settop Box PCIe Register Field shift and mask info. The
++ * names are from the chip's RDB and we use them here so that a script
++ * can correlate this code and the RDB to prevent discrepancies.
++ */
++#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK 0xc
++#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_SHIFT 0x2
++#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK 0xffffff
++#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_SHIFT 0x0
++#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK 0x1000
++#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_SHIFT 0xc
++#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK 0x2000
++#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_SHIFT 0xd
++#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK 0x300000
++#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_SHIFT 0x14
++#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK 0xf8000000
++#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_SHIFT 0x1b
++#define PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK 0x7c00000
++#define PCIE_MISC_MISC_CTRL_SCB1_SIZE_SHIFT 0x16
++#define PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK 0x1f
++#define PCIE_MISC_MISC_CTRL_SCB2_SIZE_SHIFT 0x0
++#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK 0x1f
++#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_SHIFT 0x0
++#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK 0x1f
++#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_SHIFT 0x0
++#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK 0x1f
++#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_SHIFT 0x0
++#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK 0x4
++#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_SHIFT 0x2
++#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK 0x1
++#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_SHIFT 0x0
++#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK 0x80
++#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_SHIFT 0x7
++#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK 0x20
++#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_SHIFT 0x5
++#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK 0x10
++#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_SHIFT 0x4
++#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK 0x40
++#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_SHIFT 0x6
++#define PCIE_MISC_REVISION_MAJMIN_MASK 0xffff
++#define PCIE_MISC_REVISION_MAJMIN_SHIFT 0
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK 0xfff00000
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_SHIFT 0x14
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK 0xfff0
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_SHIFT 0x4
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS 0xc
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK 0xff
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_SHIFT 0x0
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK 0xff
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_SHIFT 0x0
++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2
++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_SHIFT 0x1
++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000
++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_SHIFT 0x1b
++#define PCIE_RGR1_SW_INIT_1_PERST_MASK 0x1
++#define PCIE_RGR1_SW_INIT_1_PERST_SHIFT 0x0
++
++#define BRCM_NUM_PCIE_OUT_WINS 0x4
++#define BRCM_MAX_SCB 0x4
++
++#define BRCM_MSI_TARGET_ADDR_LT_4GB 0x0fffffffcULL
++#define BRCM_MSI_TARGET_ADDR_GT_4GB 0xffffffffcULL
++
++#define BURST_SIZE_128 0
++#define BURST_SIZE_256 1
++#define BURST_SIZE_512 2
++
++/* Offsets from PCIE_INTR2_CPU_BASE */
++#define STATUS 0x0
++#define SET 0x4
++#define CLR 0x8
++#define MASK_STATUS 0xc
++#define MASK_SET 0x10
++#define MASK_CLR 0x14
++
++#define PCIE_BUSNUM_SHIFT 20
++#define PCIE_SLOT_SHIFT 15
++#define PCIE_FUNC_SHIFT 12
++
++#if defined(__BIG_ENDIAN)
++#define DATA_ENDIAN 2 /* PCIe->DDR inbound traffic */
++#define MMIO_ENDIAN 2 /* CPU->PCIe outbound traffic */
++#else
++#define DATA_ENDIAN 0
++#define MMIO_ENDIAN 0
++#endif
++
++#define MDIO_PORT0 0x0
++#define MDIO_DATA_MASK 0x7fffffff
++#define MDIO_DATA_SHIFT 0x0
++#define MDIO_PORT_MASK 0xf0000
++#define MDIO_PORT_SHIFT 0x16
++#define MDIO_REGAD_MASK 0xffff
++#define MDIO_REGAD_SHIFT 0x0
++#define MDIO_CMD_MASK 0xfff00000
++#define MDIO_CMD_SHIFT 0x14
++#define MDIO_CMD_READ 0x1
++#define MDIO_CMD_WRITE 0x0
++#define MDIO_DATA_DONE_MASK 0x80000000
++#define MDIO_RD_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 1 : 0)
++#define MDIO_WT_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 0 : 1)
++#define SSC_REGS_ADDR 0x1100
++#define SET_ADDR_OFFSET 0x1f
++#define SSC_CNTL_OFFSET 0x2
++#define SSC_CNTL_OVRD_EN_MASK 0x8000
++#define SSC_CNTL_OVRD_EN_SHIFT 0xf
++#define SSC_CNTL_OVRD_VAL_MASK 0x4000
++#define SSC_CNTL_OVRD_VAL_SHIFT 0xe
++#define SSC_STATUS_OFFSET 0x1
++#define SSC_STATUS_SSC_MASK 0x400
++#define SSC_STATUS_SSC_SHIFT 0xa
++#define SSC_STATUS_PLL_LOCK_MASK 0x800
++#define SSC_STATUS_PLL_LOCK_SHIFT 0xb
++
++#define IDX_ADDR(pcie) \
++ ((pcie)->reg_offsets[EXT_CFG_INDEX])
++#define DATA_ADDR(pcie) \
++ ((pcie)->reg_offsets[EXT_CFG_DATA])
++#define PCIE_RGR1_SW_INIT_1(pcie) \
++ ((pcie)->reg_offsets[RGR1_SW_INIT_1])
++
++enum {
++ RGR1_SW_INIT_1,
++ EXT_CFG_INDEX,
++ EXT_CFG_DATA,
++};
++
++enum {
++ RGR1_SW_INIT_1_INIT_MASK,
++ RGR1_SW_INIT_1_INIT_SHIFT,
++ RGR1_SW_INIT_1_PERST_MASK,
++ RGR1_SW_INIT_1_PERST_SHIFT,
++};
++
++enum pcie_type {
++ BCM7425,
++ BCM7435,
++ GENERIC,
++ BCM7278,
++};
++
++struct brcm_window {
++ dma_addr_t pcie_addr;
++ phys_addr_t cpu_addr;
++ dma_addr_t size;
++};
++
++/* Internal PCIe Host Controller Information.*/
++struct brcm_pcie {
++ struct device *dev;
++ void __iomem *base;
++ struct list_head resources;
++ int irq;
++ struct clk *clk;
++ struct pci_bus *root_bus;
++ struct device_node *dn;
++ int id;
++ bool suspended;
++ int num_out_wins;
++ bool ssc;
++ int gen;
++ struct brcm_window out_wins[BRCM_NUM_PCIE_OUT_WINS];
++ unsigned int rev;
++ const int *reg_offsets;
++ const int *reg_field_info;
++ enum pcie_type type;
++};
++
++struct pcie_cfg_data {
++ const int *reg_field_info;
++ const int *offsets;
++ const enum pcie_type type;
++};
++
++static const int pcie_reg_field_info[] = {
++ [RGR1_SW_INIT_1_INIT_MASK] = 0x2,
++ [RGR1_SW_INIT_1_INIT_SHIFT] = 0x1,
++};
++
++static const int pcie_reg_field_info_bcm7278[] = {
++ [RGR1_SW_INIT_1_INIT_MASK] = 0x1,
++ [RGR1_SW_INIT_1_INIT_SHIFT] = 0x0,
++};
++
++static const int pcie_offset_bcm7425[] = {
++ [RGR1_SW_INIT_1] = 0x8010,
++ [EXT_CFG_INDEX] = 0x8300,
++ [EXT_CFG_DATA] = 0x8304,
++};
++
++static const struct pcie_cfg_data bcm7425_cfg = {
++ .reg_field_info = pcie_reg_field_info,
++ .offsets = pcie_offset_bcm7425,
++ .type = BCM7425,
++};
++
++static const int pcie_offsets[] = {
++ [RGR1_SW_INIT_1] = 0x9210,
++ [EXT_CFG_INDEX] = 0x9000,
++ [EXT_CFG_DATA] = 0x9004,
++};
++
++static const struct pcie_cfg_data bcm7435_cfg = {
++ .reg_field_info = pcie_reg_field_info,
++ .offsets = pcie_offsets,
++ .type = BCM7435,
++};
++
++static const struct pcie_cfg_data generic_cfg = {
++ .reg_field_info = pcie_reg_field_info,
++ .offsets = pcie_offsets,
++ .type = GENERIC,
++};
++
++static const int pcie_offset_bcm7278[] = {
++ [RGR1_SW_INIT_1] = 0xc010,
++ [EXT_CFG_INDEX] = 0x9000,
++ [EXT_CFG_DATA] = 0x9004,
++};
++
++static const struct pcie_cfg_data bcm7278_cfg = {
++ .reg_field_info = pcie_reg_field_info_bcm7278,
++ .offsets = pcie_offset_bcm7278,
++ .type = BCM7278,
++};
++
++static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn,
++ int where);
++
++static struct pci_ops brcm_pcie_ops = {
++ .map_bus = brcm_pcie_map_conf,
++ .read = pci_generic_config_read,
++ .write = pci_generic_config_write,
++};
++
++#if defined(CONFIG_MIPS)
++/* Broadcom MIPs HW implicitly does the swapping if necessary */
++#define bcm_readl(a) __raw_readl(a)
++#define bcm_writel(d, a) __raw_writel(d, a)
++#define bcm_readw(a) __raw_readw(a)
++#define bcm_writew(d, a) __raw_writew(d, a)
++#else
++#define bcm_readl(a) readl(a)
++#define bcm_writel(d, a) writel(d, a)
++#define bcm_readw(a) readw(a)
++#define bcm_writew(d, a) writew(d, a)
++#endif
++
++/* These macros extract/insert fields to host controller's register set. */
++#define RD_FLD(base, reg, field) \
++ rd_fld(base + reg, reg##_##field##_MASK, reg##_##field##_SHIFT)
++#define WR_FLD(base, reg, field, val) \
++ wr_fld(base + reg, reg##_##field##_MASK, reg##_##field##_SHIFT, val)
++#define WR_FLD_RB(base, reg, field, val) \
++ wr_fld_rb(base + reg, reg##_##field##_MASK, reg##_##field##_SHIFT, val)
++#define WR_FLD_WITH_OFFSET(base, off, reg, field, val) \
++ wr_fld(base + reg + off, reg##_##field##_MASK, \
++ reg##_##field##_SHIFT, val)
++#define EXTRACT_FIELD(val, reg, field) \
++ ((val & reg##_##field##_MASK) >> reg##_##field##_SHIFT)
++#define INSERT_FIELD(val, reg, field, field_val) \
++ ((val & ~reg##_##field##_MASK) | \
++ (reg##_##field##_MASK & (field_val << reg##_##field##_SHIFT)))
++
++static phys_addr_t scb_size[BRCM_MAX_SCB];
++static int num_memc;
++static int num_pcie;
++static DEFINE_MUTEX(brcm_pcie_lock);
++
++static u32 rd_fld(void __iomem *p, u32 mask, int shift)
++{
++ return (bcm_readl(p) & mask) >> shift;
++}
++
++static void wr_fld(void __iomem *p, u32 mask, int shift, u32 val)
++{
++ u32 reg = bcm_readl(p);
++
++ reg = (reg & ~mask) | ((val << shift) & mask);
++ bcm_writel(reg, p);
++}
++
++static void wr_fld_rb(void __iomem *p, u32 mask, int shift, u32 val)
++{
++ wr_fld(p, mask, shift, val);
++ (void)bcm_readl(p);
++}
++
++static const char *link_speed_to_str(int s)
++{
++ switch (s) {
++ case 1:
++ return "2.5";
++ case 2:
++ return "5.0";
++ case 3:
++ return "8.0";
++ default:
++ break;
++ }
++ return "???";
++}
++
++/*
++ * The roundup_pow_of_two() from log2.h invokes
++ * __roundup_pow_of_two(unsigned long), but we really need a
++ * such a function to take a native u64 since unsigned long
++ * is 32 bits on some configurations. So we provide this helper
++ * function below.
++ */
++static u64 roundup_pow_of_two_64(u64 n)
++{
++ return 1ULL << fls64(n - 1);
++}
++
++/*
++ * This is to convert the size of the inbound "BAR" region to the
++ * non-linear values of PCIE_X_MISC_RC_BAR[123]_CONFIG_LO.SIZE
++ */
++int encode_ibar_size(u64 size)
++{
++ int log2_in = ilog2(size);
++
++ if (log2_in >= 12 && log2_in <= 15)
++ /* Covers 4KB to 32KB (inclusive) */
++ return (log2_in - 12) + 0x1c;
++ else if (log2_in >= 16 && log2_in <= 37)
++ /* Covers 64KB to 32GB, (inclusive) */
++ return log2_in - 15;
++ /* Something is awry so disable */
++ return 0;
++}
++
++static u32 mdio_form_pkt(int port, int regad, int cmd)
++{
++ u32 pkt = 0;
++
++ pkt |= (port << MDIO_PORT_SHIFT) & MDIO_PORT_MASK;
++ pkt |= (regad << MDIO_REGAD_SHIFT) & MDIO_REGAD_MASK;
++ pkt |= (cmd << MDIO_CMD_SHIFT) & MDIO_CMD_MASK;
++
++ return pkt;
++}
++
++/* negative return value indicates error */
++static int mdio_read(void __iomem *base, u8 port, u8 regad)
++{
++ int tries;
++ u32 data;
++
++ bcm_writel(mdio_form_pkt(port, regad, MDIO_CMD_READ),
++ base + PCIE_RC_DL_MDIO_ADDR);
++ bcm_readl(base + PCIE_RC_DL_MDIO_ADDR);
++
++ data = bcm_readl(base + PCIE_RC_DL_MDIO_RD_DATA);
++ for (tries = 0; !MDIO_RD_DONE(data) && tries < 10; tries++) {
++ udelay(10);
++ data = bcm_readl(base + PCIE_RC_DL_MDIO_RD_DATA);
++ }
++
++ return MDIO_RD_DONE(data)
++ ? (data & MDIO_DATA_MASK) >> MDIO_DATA_SHIFT
++ : -EIO;
++}
++
++/* negative return value indicates error */
++static int mdio_write(void __iomem *base, u8 port, u8 regad, u16 wrdata)
++{
++ int tries;
++ u32 data;
++
++ bcm_writel(mdio_form_pkt(port, regad, MDIO_CMD_WRITE),
++ base + PCIE_RC_DL_MDIO_ADDR);
++ bcm_readl(base + PCIE_RC_DL_MDIO_ADDR);
++ bcm_writel(MDIO_DATA_DONE_MASK | wrdata,
++ base + PCIE_RC_DL_MDIO_WR_DATA);
++
++ data = bcm_readl(base + PCIE_RC_DL_MDIO_WR_DATA);
++ for (tries = 0; !MDIO_WT_DONE(data) && tries < 10; tries++) {
++ udelay(10);
++ data = bcm_readl(base + PCIE_RC_DL_MDIO_WR_DATA);
++ }
++
++ return MDIO_WT_DONE(data) ? 0 : -EIO;
++}
++
++/*
++ * Configures device for Spread Spectrum Clocking (SSC) mode; a negative
++ * return value indicates error.
++ */
++static int set_ssc(void __iomem *base)
++{
++ int tmp;
++ u16 wrdata;
++ int pll, ssc;
++
++ tmp = mdio_write(base, MDIO_PORT0, SET_ADDR_OFFSET, SSC_REGS_ADDR);
++ if (tmp < 0)
++ return tmp;
++
++ tmp = mdio_read(base, MDIO_PORT0, SSC_CNTL_OFFSET);
++ if (tmp < 0)
++ return tmp;
++
++ wrdata = INSERT_FIELD(tmp, SSC_CNTL_OVRD, EN, 1);
++ wrdata = INSERT_FIELD(wrdata, SSC_CNTL_OVRD, VAL, 1);
++ tmp = mdio_write(base, MDIO_PORT0, SSC_CNTL_OFFSET, wrdata);
++ if (tmp < 0)
++ return tmp;
++
++ usleep_range(1000, 2000);
++ tmp = mdio_read(base, MDIO_PORT0, SSC_STATUS_OFFSET);
++ if (tmp < 0)
++ return tmp;
++
++ ssc = EXTRACT_FIELD(tmp, SSC_STATUS, SSC);
++ pll = EXTRACT_FIELD(tmp, SSC_STATUS, PLL_LOCK);
++
++ return (ssc && pll) ? 0 : -EIO;
++}
++
++/* Limits operation to a specific generation (1, 2, or 3) */
++static void set_gen(void __iomem *base, int gen)
++{
++ u32 lnkcap = bcm_readl(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
++ u16 lnkctl2 = bcm_readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
++
++ lnkcap = (lnkcap & ~PCI_EXP_LNKCAP_SLS) | gen;
++ bcm_writel(lnkcap, base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
++
++ lnkctl2 = (lnkctl2 & ~0xf) | gen;
++ bcm_writew(lnkctl2, base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
++}
++
++static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie,
++ unsigned int win, phys_addr_t cpu_addr,
++ dma_addr_t pcie_addr, dma_addr_t size)
++{
++ void __iomem *base = pcie->base;
++ phys_addr_t cpu_addr_mb, limit_addr_mb;
++ u32 tmp;
++
++ /* Set the base of the pcie_addr window */
++ bcm_writel(lower_32_bits(pcie_addr) + MMIO_ENDIAN,
++ base + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + (win * 8));
++ bcm_writel(upper_32_bits(pcie_addr),
++ base + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + (win * 8));
++
++ cpu_addr_mb = cpu_addr >> 20;
++ limit_addr_mb = (cpu_addr + size - 1) >> 20;
++
++ /* Write the addr base low register */
++ WR_FLD_WITH_OFFSET(base, (win * 4),
++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT,
++ BASE, cpu_addr_mb);
++ /* Write the addr limit low register */
++ WR_FLD_WITH_OFFSET(base, (win * 4),
++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT,
++ LIMIT, limit_addr_mb);
++
++ if (pcie->type != BCM7435 && pcie->type != BCM7425) {
++ /* Write the cpu addr high register */
++ tmp = (u32)(cpu_addr_mb >>
++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS);
++ WR_FLD_WITH_OFFSET(base, (win * 8),
++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI,
++ BASE, tmp);
++ /* Write the cpu limit high register */
++ tmp = (u32)(limit_addr_mb >>
++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS);
++ WR_FLD_WITH_OFFSET(base, (win * 8),
++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI,
++ LIMIT, tmp);
++ }
++}
++
++/* Configuration space read/write support */
++static int cfg_index(int busnr, int devfn, int reg)
++{
++ return ((PCI_SLOT(devfn) & 0x1f) << PCIE_SLOT_SHIFT)
++ | ((PCI_FUNC(devfn) & 0x07) << PCIE_FUNC_SHIFT)
++ | (busnr << PCIE_BUSNUM_SHIFT)
++ | (reg & ~3);
++}
++
++/* The controller is capable of serving in both RC and EP roles */
++static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie)
++{
++ void __iomem *base = pcie->base;
++ u32 val = bcm_readl(base + PCIE_MISC_PCIE_STATUS);
++
++ return !!EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_PORT);
++}
++
++static bool brcm_pcie_link_up(struct brcm_pcie *pcie)
++{
++ void __iomem *base = pcie->base;
++ u32 val = bcm_readl(base + PCIE_MISC_PCIE_STATUS);
++ u32 dla = EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_DL_ACTIVE);
++ u32 plu = EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_PHYLINKUP);
++
++ return (dla && plu) ? true : false;
++}
++
++static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn,
++ int where)
++{
++ struct brcm_pcie *pcie = bus->sysdata;
++ void __iomem *base = pcie->base;
++ int idx;
++
++ /* Accesses to the RC go right to the RC registers if slot==0 */
++ if (pci_is_root_bus(bus))
++ return PCI_SLOT(devfn) ? NULL : base + where;
++
++ /* For devices, write to the config space index register */
++ idx = cfg_index(bus->number, devfn, where);
++ bcm_writel(idx, pcie->base + IDX_ADDR(pcie));
++ return base + DATA_ADDR(pcie) + (where & 0x3);
++}
++
++static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie,
++ unsigned int val)
++{
++ unsigned int shift = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_SHIFT];
++ u32 mask = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_MASK];
++
++ wr_fld_rb(pcie->base + PCIE_RGR1_SW_INIT_1(pcie), mask, shift, val);
++}
++
++static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie,
++ unsigned int val)
++{
++ if (pcie->type != BCM7278)
++ wr_fld_rb(pcie->base + PCIE_RGR1_SW_INIT_1(pcie),
++ PCIE_RGR1_SW_INIT_1_PERST_MASK,
++ PCIE_RGR1_SW_INIT_1_PERST_SHIFT, val);
++ else
++ /* Assert = 0, de-assert = 1 on 7278 */
++ WR_FLD_RB(pcie->base, PCIE_MISC_PCIE_CTRL, PCIE_PERSTB, !val);
++}
++
++static int brcm_pcie_add_controller(struct brcm_pcie *pcie)
++{
++ int i, ret = 0;
++
++ mutex_lock(&brcm_pcie_lock);
++ if (num_pcie > 0) {
++ num_pcie++;
++ goto done;
++ }
++
++ /* Determine num_memc and their sizes */
++ for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) {
++ u64 size = brcmstb_memory_memc_size(i);
++
++ if (size == (u64)-1) {
++ dev_err(pcie->dev, "cannot get memc%d size\n", i);
++ ret = -EINVAL;
++ goto done;
++ } else if (size) {
++ scb_size[i] = roundup_pow_of_two_64(size);
++ num_memc++;
++ } else {
++ break;
++ }
++ }
++ if (!ret && num_memc == 0) {
++ ret = -EINVAL;
++ goto done;
++ }
++
++ num_pcie++;
++done:
++ mutex_unlock(&brcm_pcie_lock);
++ return ret;
++}
++
++static void brcm_pcie_remove_controller(struct brcm_pcie *pcie)
++{
++ mutex_lock(&brcm_pcie_lock);
++ if (--num_pcie == 0)
++ num_memc = 0;
++ mutex_unlock(&brcm_pcie_lock);
++}
++
++static int brcm_pcie_parse_request_of_pci_ranges(struct brcm_pcie *pcie)
++{
++ struct resource_entry *win;
++ int ret;
++
++ ret = devm_of_pci_get_host_bridge_resources(pcie->dev, 0, 0xff,
++ &pcie->resources, NULL);
++ if (ret) {
++ dev_err(pcie->dev, "failed to get host resources\n");
++ return ret;
++ }
++
++ resource_list_for_each_entry(win, &pcie->resources) {
++ struct resource *parent, *res = win->res;
++ dma_addr_t offset = (dma_addr_t)win->offset;
++
++ if (resource_type(res) == IORESOURCE_IO) {
++ parent = &ioport_resource;
++ } else if (resource_type(res) == IORESOURCE_MEM) {
++ if (pcie->num_out_wins >= BRCM_NUM_PCIE_OUT_WINS) {
++ dev_err(pcie->dev, "too many outbound wins\n");
++ return -EINVAL;
++ }
++ pcie->out_wins[pcie->num_out_wins].cpu_addr
++ = (phys_addr_t)res->start;
++ pcie->out_wins[pcie->num_out_wins].pcie_addr
++ = (dma_addr_t)(res->start
++ - (phys_addr_t)offset);
++ pcie->out_wins[pcie->num_out_wins].size
++ = (dma_addr_t)(res->end - res->start + 1);
++ pcie->num_out_wins++;
++ parent = &iomem_resource;
++ } else {
++ continue;
++ }
++
++ ret = devm_request_resource(pcie->dev, parent, res);
++ if (ret) {
++ dev_err(pcie->dev, "failed to get res %pR\n", res);
++ return ret;
++ }
++ }
++ return 0;
++}
++
++static int brcm_pcie_setup(struct brcm_pcie *pcie)
++{
++ void __iomem *base = pcie->base;
++ unsigned int scb_size_val;
++ u64 rc_bar2_offset, rc_bar2_size, total_mem_size = 0;
++ u32 tmp, burst;
++ int i, j, ret, limit;
++ u16 nlw, cls, lnksta;
++ bool ssc_good = false;
++ struct device *dev = pcie->dev;
++
++ /* Reset the bridge */
++ brcm_pcie_bridge_sw_init_set(pcie, 1);
++
++ /*
++ * Ensure that the fundamental reset is asserted, except for 7278,
++ * which fails if we do this.
++ */
++ if (pcie->type != BCM7278)
++ brcm_pcie_perst_set(pcie, 1);
++
++ usleep_range(100, 200);
++
++ /* Take the bridge out of reset */
++ brcm_pcie_bridge_sw_init_set(pcie, 0);
++
++ WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 0);
++ /* Wait for SerDes to be stable */
++ usleep_range(100, 200);
++
++ /* Grab the PCIe hw revision number */
++ tmp = bcm_readl(base + PCIE_MISC_REVISION);
++ pcie->rev = EXTRACT_FIELD(tmp, PCIE_MISC_REVISION, MAJMIN);
++
++ /* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */
++ tmp = INSERT_FIELD(0, PCIE_MISC_MISC_CTRL, SCB_ACCESS_EN, 1);
++ tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, CFG_READ_UR_MODE, 1);
++ burst = (pcie->type == GENERIC || pcie->type == BCM7278)
++ ? BURST_SIZE_512 : BURST_SIZE_256;
++ tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, MAX_BURST_SIZE, burst);
++ bcm_writel(tmp, base + PCIE_MISC_MISC_CTRL);
++
++ /*
++ * Set up inbound memory view for the EP (called RC_BAR2,
++ * not to be confused with the BARs that are advertised by
++ * the EP).
++ */
++ for (i = 0; i < num_memc; i++)
++ total_mem_size += scb_size[i];
++
++ /*
++ * The PCIe host controller by design must set the inbound
++ * viewport to be a contiguous arrangement of all of the
++ * system's memory. In addition, its size mut be a power of
++ * two. To further complicate matters, the viewport must
++ * start on a pcie-address that is aligned on a multiple of its
++ * size. If a portion of the viewport does not represent
++ * system memory -- e.g. 3GB of memory requires a 4GB viewport
++ * -- we can map the outbound memory in or after 3GB and even
++ * though the viewport will overlap the outbound memory the
++ * controller will know to send outbound memory downstream and
++ * everything else upstream.
++ */
++ rc_bar2_size = roundup_pow_of_two_64(total_mem_size);
++
++ /*
++ * Set simple configuration based on memory sizes
++ * only. We always start the viewport at address 0.
++ */
++ rc_bar2_offset = 0;
++
++ tmp = lower_32_bits(rc_bar2_offset);
++ tmp = INSERT_FIELD(tmp, PCIE_MISC_RC_BAR2_CONFIG_LO, SIZE,
++ encode_ibar_size(rc_bar2_size));
++ bcm_writel(tmp, base + PCIE_MISC_RC_BAR2_CONFIG_LO);
++ bcm_writel(upper_32_bits(rc_bar2_offset),
++ base + PCIE_MISC_RC_BAR2_CONFIG_HI);
++
++ scb_size_val = scb_size[0]
++ ? ilog2(scb_size[0]) - 15 : 0xf; /* 0xf is 1GB */
++ WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB0_SIZE, scb_size_val);
++
++ if (num_memc > 1) {
++ scb_size_val = scb_size[1]
++ ? ilog2(scb_size[1]) - 15 : 0xf; /* 0xf is 1GB */
++ WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB1_SIZE, scb_size_val);
++ }
++
++ if (num_memc > 2) {
++ scb_size_val = scb_size[2]
++ ? ilog2(scb_size[2]) - 15 : 0xf; /* 0xf is 1GB */
++ WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB2_SIZE, scb_size_val);
++ }
++
++ /* disable the PCIe->GISB memory window (RC_BAR1) */
++ WR_FLD(base, PCIE_MISC_RC_BAR1_CONFIG_LO, SIZE, 0);
++
++ /* disable the PCIe->SCB memory window (RC_BAR3) */
++ WR_FLD(base, PCIE_MISC_RC_BAR3_CONFIG_LO, SIZE, 0);
++
++ if (!pcie->suspended) {
++ /* clear any interrupts we find on boot */
++ bcm_writel(0xffffffff, base + PCIE_INTR2_CPU_BASE + CLR);
++ (void)bcm_readl(base + PCIE_INTR2_CPU_BASE + CLR);
++ }
++
++ /* Mask all interrupts since we are not handling any yet */
++ bcm_writel(0xffffffff, base + PCIE_INTR2_CPU_BASE + MASK_SET);
++ (void)bcm_readl(base + PCIE_INTR2_CPU_BASE + MASK_SET);
++
++ if (pcie->gen)
++ set_gen(base, pcie->gen);
++
++ /* Unassert the fundamental reset */
++ brcm_pcie_perst_set(pcie, 0);
++
++ /*
++ * Give the RC/EP time to wake up, before trying to configure RC.
++ * Intermittently check status for link-up, up to a total of 100ms
++ * when we don't know if the device is there, and up to 1000ms if
++ * we do know the device is there.
++ */
++ limit = pcie->suspended ? 1000 : 100;
++ for (i = 1, j = 0; j < limit && !brcm_pcie_link_up(pcie);
++ j += i, i = i * 2)
++ msleep(i + j > limit ? limit - j : i);
++
++ if (!brcm_pcie_link_up(pcie)) {
++ dev_info(dev, "link down\n");
++ return -ENODEV;
++ }
++
++ if (!brcm_pcie_rc_mode(pcie)) {
++ dev_err(dev, "PCIe misconfigured; is in EP mode\n");
++ return -EINVAL;
++ }
++
++ for (i = 0; i < pcie->num_out_wins; i++)
++ brcm_pcie_set_outbound_win(pcie, i, pcie->out_wins[i].cpu_addr,
++ pcie->out_wins[i].pcie_addr,
++ pcie->out_wins[i].size);
++
++ /*
++ * For config space accesses on the RC, show the right class for
++ * a PCIe-PCIe bridge (the default setting is to be EP mode).
++ */
++ WR_FLD_RB(base, PCIE_RC_CFG_PRIV1_ID_VAL3, CLASS_CODE, 0x060400);
++
++ if (pcie->ssc) {
++ ret = set_ssc(base);
++ if (ret == 0)
++ ssc_good = true;
++ else
++ dev_err(dev, "failed attempt to enter ssc mode\n");
++ }
++
++ lnksta = bcm_readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA);
++ cls = lnksta & PCI_EXP_LNKSTA_CLS;
++ nlw = (lnksta & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT;
++ dev_info(dev, "link up, %s Gbps x%u %s\n", link_speed_to_str(cls),
++ nlw, ssc_good ? "(SSC)" : "(!SSC)");
++
++ /* PCIe->SCB endian mode for BAR */
++ /* field ENDIAN_MODE_BAR2 = DATA_ENDIAN */
++ WR_FLD_RB(base, PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1,
++ ENDIAN_MODE_BAR2, DATA_ENDIAN);
++
++ /*
++ * Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1
++ * is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1.
++ */
++ WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, CLKREQ_DEBUG_ENABLE, 1);
++
++ return 0;
++}
++
++/* L23 is a low-power PCIe link state */
++static void enter_l23(struct brcm_pcie *pcie)
++{
++ void __iomem *base = pcie->base;
++ int tries, l23;
++
++ /* assert request for L23 */
++ WR_FLD_RB(base, PCIE_MISC_PCIE_CTRL, PCIE_L23_REQUEST, 1);
++ /* poll L23 status */
++ for (tries = 0, l23 = 0; tries < 1000 && !l23; tries++)
++ l23 = RD_FLD(base, PCIE_MISC_PCIE_STATUS, PCIE_LINK_IN_L23);
++ if (!l23)
++ dev_err(pcie->dev, "failed to enter L23\n");
++}
++
++static void turn_off(struct brcm_pcie *pcie)
++{
++ void __iomem *base = pcie->base;
++
++ if (brcm_pcie_link_up(pcie))
++ enter_l23(pcie);
++ /* Assert fundamental reset */
++ brcm_pcie_perst_set(pcie, 1);
++ /* Deassert request for L23 in case it was asserted */
++ WR_FLD_RB(base, PCIE_MISC_PCIE_CTRL, PCIE_L23_REQUEST, 0);
++ /* Turn off SerDes */
++ WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 1);
++ /* Shutdown PCIe bridge */
++ brcm_pcie_bridge_sw_init_set(pcie, 1);
++}
++
++static int brcm_pcie_suspend(struct device *dev)
++{
++ struct brcm_pcie *pcie = dev_get_drvdata(dev);
++
++ turn_off(pcie);
++ clk_disable_unprepare(pcie->clk);
++ pcie->suspended = true;
++
++ return 0;
++}
++
++static int brcm_pcie_resume(struct device *dev)
++{
++ struct brcm_pcie *pcie = dev_get_drvdata(dev);
++ void __iomem *base;
++ int ret;
++
++ base = pcie->base;
++ clk_prepare_enable(pcie->clk);
++
++ /* Take bridge out of reset so we can access the SerDes reg */
++ brcm_pcie_bridge_sw_init_set(pcie, 0);
++
++ /* Turn on SerDes */
++ WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 0);
++ /* Wait for SerDes to be stable */
++ usleep_range(100, 200);
++
++ ret = brcm_pcie_setup(pcie);
++ if (ret)
++ return ret;
++
++ pcie->suspended = false;
++
++ return 0;
++}
++
++static void _brcm_pcie_remove(struct brcm_pcie *pcie)
++{
++ turn_off(pcie);
++ clk_disable_unprepare(pcie->clk);
++ clk_put(pcie->clk);
++ brcm_pcie_remove_controller(pcie);
++}
++
++static int brcm_pcie_remove(struct platform_device *pdev)
++{
++ struct brcm_pcie *pcie = platform_get_drvdata(pdev);
++
++ pci_stop_root_bus(pcie->root_bus);
++ pci_remove_root_bus(pcie->root_bus);
++ _brcm_pcie_remove(pcie);
++
++ return 0;
++}
++
++static const struct of_device_id brcm_pcie_match[] = {
++ { .compatible = "brcm,bcm7425-pcie", .data = &bcm7425_cfg },
++ { .compatible = "brcm,bcm7435-pcie", .data = &bcm7435_cfg },
++ { .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
++ { .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg },
++ {},
++};
++MODULE_DEVICE_TABLE(of, brcm_pcie_match);
++
++static int brcm_pcie_probe(struct platform_device *pdev)
++{
++ struct device_node *dn = pdev->dev.of_node;
++ const struct of_device_id *of_id;
++ const struct pcie_cfg_data *data;
++ int ret;
++ struct brcm_pcie *pcie;
++ struct resource *res;
++ void __iomem *base;
++ u32 tmp;
++ struct pci_host_bridge *bridge;
++ struct pci_bus *child;
++
++ bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie));
++ if (!bridge)
++ return -ENOMEM;
++
++ pcie = pci_host_bridge_priv(bridge);
++ INIT_LIST_HEAD(&pcie->resources);
++
++ of_id = of_match_node(brcm_pcie_match, dn);
++ if (!of_id) {
++ dev_err(&pdev->dev, "failed to look up compatible string\n");
++ return -EINVAL;
++ }
++
++ if (of_property_read_u32(dn, "dma-ranges", &tmp) == 0) {
++ dev_err(&pdev->dev, "cannot yet handle dma-ranges\n");
++ return -EINVAL;
++ }
++
++ data = of_id->data;
++ pcie->reg_offsets = data->offsets;
++ pcie->reg_field_info = data->reg_field_info;
++ pcie->type = data->type;
++ pcie->dn = dn;
++ pcie->dev = &pdev->dev;
++
++ /* We use the domain number as our controller number */
++ pcie->id = of_get_pci_domain_nr(dn);
++ if (pcie->id < 0)
++ return pcie->id;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res)
++ return -EINVAL;
++
++ base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(base))
++ return PTR_ERR(base);
++
++ pcie->clk = of_clk_get_by_name(dn, "sw_pcie");
++ if (IS_ERR(pcie->clk)) {
++ dev_err(&pdev->dev, "could not get clock\n");
++ pcie->clk = NULL;
++ }
++ pcie->base = base;
++
++ ret = of_pci_get_max_link_speed(dn);
++ pcie->gen = (ret < 0) ? 0 : ret;
++
++ pcie->ssc = of_property_read_bool(dn, "brcm,enable-ssc");
++
++ ret = irq_of_parse_and_map(pdev->dev.of_node, 0);
++ if (ret == 0)
++ /* keep going, as we don't use this intr yet */
++ dev_warn(pcie->dev, "cannot get PCIe interrupt\n");
++ else
++ pcie->irq = ret;
++
++ ret = brcm_pcie_parse_request_of_pci_ranges(pcie);
++ if (ret)
++ return ret;
++
++ ret = clk_prepare_enable(pcie->clk);
++ if (ret) {
++ dev_err(&pdev->dev, "could not enable clock\n");
++ return ret;
++ }
++
++ ret = brcm_pcie_add_controller(pcie);
++ if (ret)
++ return ret;
++
++ ret = brcm_pcie_setup(pcie);
++ if (ret)
++ goto fail;
++
++ list_splice_init(&pcie->resources, &bridge->windows);
++ bridge->dev.parent = &pdev->dev;
++ bridge->busnr = 0;
++ bridge->ops = &brcm_pcie_ops;
++ bridge->sysdata = pcie;
++ bridge->map_irq = of_irq_parse_and_map_pci;
++ bridge->swizzle_irq = pci_common_swizzle;
++
++ ret = pci_scan_root_bus_bridge(bridge);
++ if (ret < 0) {
++ dev_err(pcie->dev, "Scanning root bridge failed\n");
++ goto fail;
++ }
++
++ pci_assign_unassigned_bus_resources(bridge->bus);
++ list_for_each_entry(child, &bridge->bus->children, node)
++ pcie_bus_configure_settings(child);
++ pci_bus_add_devices(bridge->bus);
++ platform_set_drvdata(pdev, pcie);
++ pcie->root_bus = bridge->bus;
++
++ return 0;
++
++fail:
++ _brcm_pcie_remove(pcie);
++ return ret;
++}
++
++static const struct dev_pm_ops brcm_pcie_pm_ops = {
++ .suspend_noirq = brcm_pcie_suspend,
++ .resume_noirq = brcm_pcie_resume,
++};
++
++static struct platform_driver brcm_pcie_driver = {
++ .probe = brcm_pcie_probe,
++ .remove = brcm_pcie_remove,
++ .driver = {
++ .name = "brcm-pcie",
++ .owner = THIS_MODULE,
++ .of_match_table = brcm_pcie_match,
++ .pm = &brcm_pcie_pm_ops,
++ },
++};
++
++module_platform_driver(brcm_pcie_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("Broadcom STB PCIe RC driver");
++MODULE_AUTHOR("Broadcom");
+--- /dev/null
++++ b/include/soc/brcmstb/memory_api.h
+@@ -0,0 +1,25 @@
++#ifndef __MEMORY_API_H
++#define __MEMORY_API_H
++
++/*
++ * Bus Interface Unit control register setup, must happen early during boot,
++ * before SMP is brought up, called by machine entry point.
++ */
++void brcmstb_biuctrl_init(void);
++
++#ifdef CONFIG_SOC_BRCMSTB
++int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa);
++u64 brcmstb_memory_memc_size(int memc);
++#else
++static inline int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa)
++{
++ return -EINVAL;
++}
++
++static inline u64 brcmstb_memory_memc_size(int memc)
++{
++ return -1;
++}
++#endif
++
++#endif /* __MEMORY_API_H */