aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0466-thermal-brcmstb_thermal-Add-BCM2838-support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0466-thermal-brcmstb_thermal-Add-BCM2838-support.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0466-thermal-brcmstb_thermal-Add-BCM2838-support.patch162
1 files changed, 162 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0466-thermal-brcmstb_thermal-Add-BCM2838-support.patch b/target/linux/brcm2708/patches-4.19/950-0466-thermal-brcmstb_thermal-Add-BCM2838-support.patch
new file mode 100644
index 0000000000..6bc76ed6e6
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0466-thermal-brcmstb_thermal-Add-BCM2838-support.patch
@@ -0,0 +1,162 @@
+From d49649e2dcf0d5775e92677d37e229e0387fe82a Mon Sep 17 00:00:00 2001
+From: Stefan Wahren <wahrenst@gmx.net>
+Date: Sat, 18 May 2019 12:26:11 +0200
+Subject: [PATCH] thermal: brcmstb_thermal: Add BCM2838 support
+
+The BCM2838 has an AVS TMON hardware block. This adds the necessary
+support to the brcmstb_thermal driver ( no trip handling ).
+
+Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
+---
+ drivers/thermal/broadcom/Kconfig | 2 +-
+ drivers/thermal/broadcom/brcmstb_thermal.c | 65 +++++++++++++++++++---
+ 2 files changed, 58 insertions(+), 9 deletions(-)
+
+--- a/drivers/thermal/broadcom/Kconfig
++++ b/drivers/thermal/broadcom/Kconfig
+@@ -8,7 +8,7 @@ config BCM2835_THERMAL
+
+ config BRCMSTB_THERMAL
+ tristate "Broadcom STB AVS TMON thermal driver"
+- depends on ARCH_BRCMSTB || COMPILE_TEST
++ depends on ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
+ help
+ Enable this driver if you have a Broadcom STB SoC and would like
+ thermal framework support.
+--- a/drivers/thermal/broadcom/brcmstb_thermal.c
++++ b/drivers/thermal/broadcom/brcmstb_thermal.c
+@@ -19,6 +19,7 @@
+ #define pr_fmt(fmt) DRV_NAME ": " fmt
+
+ #include <linux/bitops.h>
++#include <linux/clk.h>
+ #include <linux/device.h>
+ #include <linux/err.h>
+ #include <linux/io.h>
+@@ -31,9 +32,6 @@
+ #include <linux/thermal.h>
+
+ #define AVS_TMON_STATUS 0x00
+- #define AVS_TMON_STATUS_valid_msk BIT(11)
+- #define AVS_TMON_STATUS_data_msk GENMASK(10, 1)
+- #define AVS_TMON_STATUS_data_shift 1
+
+ #define AVS_TMON_EN_OVERTEMP_RESET 0x04
+ #define AVS_TMON_EN_OVERTEMP_RESET_msk BIT(0)
+@@ -111,10 +109,19 @@ static struct avs_tmon_trip avs_tmon_tri
+ },
+ };
+
++struct brcmstb_thermal_of_data {
++ const struct thermal_zone_of_device_ops *of_ops;
++ u32 status_valid_mask;
++ u32 status_data_mask;
++ u32 status_data_shift;
++};
++
+ struct brcmstb_thermal_priv {
+ void __iomem *tmon_base;
+ struct device *dev;
+ struct thermal_zone_device *thermal;
++ struct clk *clk;
++ const struct brcmstb_thermal_of_data *socdata;
+ };
+
+ static void avs_tmon_get_coeffs(struct thermal_zone_device *tz, int *slope,
+@@ -164,17 +171,18 @@ static inline u32 avs_tmon_temp_to_code(
+ static int brcmstb_get_temp(void *data, int *temp)
+ {
+ struct brcmstb_thermal_priv *priv = data;
++ const struct brcmstb_thermal_of_data *socdata = priv->socdata;
+ u32 val;
+ long t;
+
+ val = __raw_readl(priv->tmon_base + AVS_TMON_STATUS);
+
+- if (!(val & AVS_TMON_STATUS_valid_msk)) {
++ if (!(val & socdata->status_valid_mask)) {
+ dev_err(priv->dev, "reading not valid\n");
+ return -EIO;
+ }
+
+- val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift;
++ val = (val & socdata->status_data_mask) >> socdata->status_data_shift;
+
+ t = avs_tmon_code_to_temp(priv->thermal, val);
+ if (t < 0)
+@@ -299,13 +307,34 @@ static int brcmstb_set_trips(void *data,
+ return 0;
+ }
+
+-static struct thermal_zone_of_device_ops of_ops = {
++static const struct thermal_zone_of_device_ops bcm7445_thermal_of_ops = {
+ .get_temp = brcmstb_get_temp,
+ .set_trips = brcmstb_set_trips,
+ };
+
++static const struct thermal_zone_of_device_ops bcm2838_thermal_of_ops = {
++ .get_temp = brcmstb_get_temp,
++};
++
++static const struct brcmstb_thermal_of_data bcm7445_thermal_of_data = {
++ .of_ops = &bcm7445_thermal_of_ops,
++ .status_valid_mask = BIT(11),
++ .status_data_mask = GENMASK(10, 1),
++ .status_data_shift = 1,
++};
++
++static const struct brcmstb_thermal_of_data bcm2838_thermal_of_data = {
++ .of_ops = &bcm2838_thermal_of_ops,
++ .status_valid_mask = BIT(10),
++ .status_data_mask = GENMASK(9, 0),
++ .status_data_shift = 0,
++};
++
+ static const struct of_device_id brcmstb_thermal_id_table[] = {
+- { .compatible = "brcm,avs-tmon" },
++ { .compatible = "brcm,avs-tmon",
++ .data = &bcm7445_thermal_of_data },
++ { .compatible = "brcm,avs-tmon-bcm2838",
++ .data = &bcm2838_thermal_of_data },
+ {},
+ };
+ MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table);
+@@ -326,10 +355,27 @@ static int brcmstb_thermal_probe(struct
+ if (IS_ERR(priv->tmon_base))
+ return PTR_ERR(priv->tmon_base);
+
++ priv->socdata = of_device_get_match_data(&pdev->dev);
++ if (!priv->socdata) {
++ dev_err(&pdev->dev, "no device match found\n");
++ return -ENODEV;
++ }
++
++ priv->clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(priv->clk) && PTR_ERR(priv->clk) == -EPROBE_DEFER)
++ return -EPROBE_DEFER;
++
++ if (!IS_ERR(priv->clk)) {
++ ret = clk_prepare_enable(priv->clk);
++ if (ret)
++ return ret;
++ }
++
+ priv->dev = &pdev->dev;
+ platform_set_drvdata(pdev, priv);
+
+- thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &of_ops);
++ thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv,
++ priv->socdata->of_ops);
+ if (IS_ERR(thermal)) {
+ ret = PTR_ERR(thermal);
+ dev_err(&pdev->dev, "could not register sensor: %d\n", ret);
+@@ -369,6 +415,9 @@ static int brcmstb_thermal_exit(struct p
+ if (thermal)
+ thermal_zone_of_sensor_unregister(&pdev->dev, priv->thermal);
+
++ if (!IS_ERR(priv->clk))
++ clk_disable_unprepare(priv->clk);
++
+ return 0;
+ }
+