aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0652-overlays-Add-baudrate-parameter-to-i2c3-i2c6.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0652-overlays-Add-baudrate-parameter-to-i2c3-i2c6.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0652-overlays-Add-baudrate-parameter-to-i2c3-i2c6.patch194
1 files changed, 194 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0652-overlays-Add-baudrate-parameter-to-i2c3-i2c6.patch b/target/linux/brcm2708/patches-4.19/950-0652-overlays-Add-baudrate-parameter-to-i2c3-i2c6.patch
new file mode 100644
index 0000000000..5ec631f7fd
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0652-overlays-Add-baudrate-parameter-to-i2c3-i2c6.patch
@@ -0,0 +1,194 @@
+From 114845b6010b6e6a320804f2d86ab4d5dc5a06de Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Mon, 5 Aug 2019 14:17:14 +0100
+Subject: [PATCH] overlays: Add baudrate parameter to i2c3-i2c6
+
+The overlays for enabling the new BCM2711 I2C interfaces were lacking
+the means to configure the baud/clock rate.
+
+Also explictly set the default pins, rather than relying on the values
+in the base DTB.
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ arch/arm/boot/dts/overlays/README | 8 ++++++++
+ arch/arm/boot/dts/overlays/i2c3-overlay.dts | 15 ++++++++++++---
+ arch/arm/boot/dts/overlays/i2c4-overlay.dts | 15 ++++++++++++---
+ arch/arm/boot/dts/overlays/i2c5-overlay.dts | 15 ++++++++++++---
+ arch/arm/boot/dts/overlays/i2c6-overlay.dts | 15 ++++++++++++---
+ 5 files changed, 56 insertions(+), 12 deletions(-)
+
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -1221,6 +1221,8 @@ Info: Enable the i2c3 bus
+ Load: dtoverlay=i2c3,<param>
+ Params: pins_2_3 Use GPIOs 2 and 3
+ pins_4_5 Use GPIOs 4 and 5 (default)
++ baudrate Set the baudrate for the interface (default
++ "100000")
+
+
+ Name: i2c4
+@@ -1228,6 +1230,8 @@ Info: Enable the i2c4 bus
+ Load: dtoverlay=i2c4,<param>
+ Params: pins_6_7 Use GPIOs 6 and 7
+ pins_8_9 Use GPIOs 8 and 9 (default)
++ baudrate Set the baudrate for the interface (default
++ "100000")
+
+
+ Name: i2c5
+@@ -1235,6 +1239,8 @@ Info: Enable the i2c5 bus
+ Load: dtoverlay=i2c5,<param>
+ Params: pins_10_11 Use GPIOs 10 and 11
+ pins_12_13 Use GPIOs 12 and 13 (default)
++ baudrate Set the baudrate for the interface (default
++ "100000")
+
+
+ Name: i2c6
+@@ -1242,6 +1248,8 @@ Info: Enable the i2c6 bus
+ Load: dtoverlay=i2c6,<param>
+ Params: pins_0_1 Use GPIOs 0 and 1
+ pins_22_23 Use GPIOs 22 and 23 (default)
++ baudrate Set the baudrate for the interface (default
++ "100000")
+
+
+ Name: i2s-gpio28-31
+--- a/arch/arm/boot/dts/overlays/i2c3-overlay.dts
++++ b/arch/arm/boot/dts/overlays/i2c3-overlay.dts
+@@ -6,10 +6,11 @@
+
+ fragment@0 {
+ target = <&i2c3>;
+- __overlay__ {
++ frag0: __overlay__ {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
++ clock-frequency = <100000>;
+ };
+ };
+
+@@ -20,8 +21,16 @@
+ };
+ };
+
++ fragment@2 {
++ target = <&i2c3_pins>;
++ __overlay__ {
++ brcm,pins = <4 5>;
++ };
++ };
++
+ __overrides__ {
+- pins_2_3 = <0>,"=1";
+- pins_4_5 = <0>,"!1";
++ pins_2_3 = <0>,"=1!2";
++ pins_4_5 = <0>,"!1=2";
++ baudrate = <&frag0>, "clock-frequency:0";
+ };
+ };
+--- a/arch/arm/boot/dts/overlays/i2c4-overlay.dts
++++ b/arch/arm/boot/dts/overlays/i2c4-overlay.dts
+@@ -6,10 +6,11 @@
+
+ fragment@0 {
+ target = <&i2c4>;
+- __overlay__ {
++ frag0: __overlay__ {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
++ clock-frequency = <100000>;
+ };
+ };
+
+@@ -20,8 +21,16 @@
+ };
+ };
+
++ fragment@2 {
++ target = <&i2c4_pins>;
++ __overlay__ {
++ brcm,pins = <8 9>;
++ };
++ };
++
+ __overrides__ {
+- pins_6_7 = <0>,"=1";
+- pins_8_9 = <0>,"!1";
++ pins_6_7 = <0>,"=1!2";
++ pins_8_9 = <0>,"!1=2";
++ baudrate = <&frag0>, "clock-frequency:0";
+ };
+ };
+--- a/arch/arm/boot/dts/overlays/i2c5-overlay.dts
++++ b/arch/arm/boot/dts/overlays/i2c5-overlay.dts
+@@ -6,10 +6,11 @@
+
+ fragment@0 {
+ target = <&i2c5>;
+- __overlay__ {
++ frag0: __overlay__ {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins>;
++ clock-frequency = <100000>;
+ };
+ };
+
+@@ -20,8 +21,16 @@
+ };
+ };
+
++ fragment@2 {
++ target = <&i2c5_pins>;
++ __overlay__ {
++ brcm,pins = <12 13>;
++ };
++ };
++
+ __overrides__ {
+- pins_10_11 = <0>,"=1";
+- pins_12_13 = <0>,"!1";
++ pins_10_11 = <0>,"=1!2";
++ pins_12_13 = <0>,"!1=2";
++ baudrate = <&frag0>, "clock-frequency:0";
+ };
+ };
+--- a/arch/arm/boot/dts/overlays/i2c6-overlay.dts
++++ b/arch/arm/boot/dts/overlays/i2c6-overlay.dts
+@@ -6,10 +6,11 @@
+
+ fragment@0 {
+ target = <&i2c6>;
+- __overlay__ {
++ frag0: __overlay__ {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_pins>;
++ clock-frequency = <100000>;
+ };
+ };
+
+@@ -20,8 +21,16 @@
+ };
+ };
+
++ fragment@2 {
++ target = <&i2c6_pins>;
++ __overlay__ {
++ brcm,pins = <22 23>;
++ };
++ };
++
+ __overrides__ {
+- pins_0_1 = <0>,"=1";
+- pins_22_23 = <0>,"!1";
++ pins_0_1 = <0>,"=1!2";
++ pins_22_23 = <0>,"!1=2";
++ baudrate = <&frag0>, "clock-frequency:0";
+ };
+ };