aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0808-usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0808-usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0808-usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch84
1 files changed, 84 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0808-usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch b/target/linux/brcm2708/patches-4.19/950-0808-usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch
new file mode 100644
index 0000000000..ba1e9d4af4
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0808-usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch
@@ -0,0 +1,84 @@
+From fd483c4e43a983d90c308c4d668e83be4fd6a392 Mon Sep 17 00:00:00 2001
+From: Tim Gover <990920+timg236@users.noreply.github.com>
+Date: Wed, 15 Jan 2020 11:26:19 +0000
+Subject: [PATCH] usb: xhci: Raspberry Pi FW loader for VIA VL805
+
+The VL805 FW may either be loaded from an SPI EEPROM or alternatively
+loaded directly by the VideoCore firmware. A PCI reset will reset
+the VL805 XHCI controller on the Raspberry Pi4 requiring the firmware
+to be reloaded if an SPI EEPROM is not present.
+
+Use a VideoCore mailbox to trigger the loading of the VL805
+firmware (if necessary) after a PCI reset.
+
+Signed-off-by: Tim Gover <tim.gover@raspberrypi.org>
+---
+ drivers/usb/host/pci-quirks.c | 31 +++++++++++++++++++++-
+ include/soc/bcm2835/raspberrypi-firmware.h | 2 +-
+ 2 files changed, 31 insertions(+), 2 deletions(-)
+
+--- a/drivers/usb/host/pci-quirks.c
++++ b/drivers/usb/host/pci-quirks.c
+@@ -18,7 +18,7 @@
+ #include <linux/dmi.h>
+ #include "pci-quirks.h"
+ #include "xhci-ext-caps.h"
+-
++#include <soc/bcm2835/raspberrypi-firmware.h>
+
+ #define UHCI_USBLEGSUP 0xc0 /* legacy support */
+ #define UHCI_USBCMD 0 /* command register */
+@@ -632,6 +632,32 @@ EXPORT_SYMBOL_GPL(usb_amd_pt_check_port)
+
+ #endif /* CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+
++/* The VL805 firmware may either be loaded from an EEPROM or by the BIOS into
++ * memory. If run from memory it must be reloaded after a PCI fundmental reset.
++ * The Raspberry Pi firmware acts as the BIOS in this case.
++ */
++static void usb_vl805_init(struct pci_dev *pdev)
++{
++#if IS_ENABLED(CONFIG_RASPBERRYPI_FIRMWARE)
++ struct rpi_firmware *fw;
++ struct {
++ u32 dev_addr;
++ } packet;
++ int ret;
++
++ fw = rpi_firmware_get(NULL);
++ if (!fw)
++ return;
++
++ packet.dev_addr = (pdev->bus->number << 20) |
++ (PCI_SLOT(pdev->devfn) << 15) | (PCI_FUNC(pdev->devfn) << 12);
++
++ dev_dbg(&pdev->dev, "RPI_FIRMWARE_NOTIFY_XHCI_RESET %x", packet.dev_addr);
++ ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET,
++ &packet, sizeof(packet));
++#endif
++}
++
+ #if IS_ENABLED(CONFIG_USB_UHCI_HCD)
+
+ /*
+@@ -1226,6 +1252,9 @@ hc_init:
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+ usb_enable_intel_xhci_ports(pdev);
+
++ if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483)
++ usb_vl805_init(pdev);
++
+ op_reg_base = base + XHCI_HC_LENGTH(readl(base));
+
+ /* Wait for the host controller to be ready before writing any
+--- a/include/soc/bcm2835/raspberrypi-firmware.h
++++ b/include/soc/bcm2835/raspberrypi-firmware.h
+@@ -98,7 +98,7 @@ enum rpi_firmware_property_tag {
+ RPI_FIRMWARE_SET_PERIPH_REG = 0x00038045,
+ RPI_FIRMWARE_GET_POE_HAT_VAL = 0x00030049,
+ RPI_FIRMWARE_SET_POE_HAT_VAL = 0x00030050,
+-
++ RPI_FIRMWARE_NOTIFY_XHCI_RESET = 0x00030058,
+
+ /* Dispmanx TAGS */
+ RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001,