diff options
Diffstat (limited to 'target/linux/brcm47xx/patches-3.2/021-bcma-add-serial-flash-support-to-bcma.patch')
-rw-r--r-- | target/linux/brcm47xx/patches-3.2/021-bcma-add-serial-flash-support-to-bcma.patch | 505 |
1 files changed, 0 insertions, 505 deletions
diff --git a/target/linux/brcm47xx/patches-3.2/021-bcma-add-serial-flash-support-to-bcma.patch b/target/linux/brcm47xx/patches-3.2/021-bcma-add-serial-flash-support-to-bcma.patch deleted file mode 100644 index 2de4ba0f52..0000000000 --- a/target/linux/brcm47xx/patches-3.2/021-bcma-add-serial-flash-support-to-bcma.patch +++ /dev/null @@ -1,505 +0,0 @@ ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -38,6 +38,11 @@ config BCMA_HOST_SOC - bool - depends on BCMA_DRIVER_MIPS - -+config BCMA_SFLASH -+ bool -+ depends on BCMA_DRIVER_MIPS -+ default y -+ - config BCMA_DRIVER_MIPS - bool "BCMA Broadcom MIPS core driver" - depends on BCMA && MIPS ---- a/drivers/bcma/Makefile -+++ b/drivers/bcma/Makefile -@@ -1,5 +1,6 @@ - bcma-y += main.o scan.o core.o sprom.o - bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o -+bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o - bcma-y += driver_pci.o - bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o - bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -42,6 +42,11 @@ void bcma_chipco_serial_init(struct bcma - u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); - u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); - -+#ifdef CONFIG_BCMA_SFLASH -+/* driver_chipcommon_sflash.c */ -+int bcma_sflash_init(struct bcma_drv_cc *cc); -+#endif /* CONFIG_BCMA_SFLASH */ -+ - #ifdef CONFIG_BCMA_HOST_PCI - /* host_pci.c */ - extern int __init bcma_host_pci_init(void); ---- /dev/null -+++ b/drivers/bcma/driver_chipcommon_sflash.c -@@ -0,0 +1,398 @@ -+/* -+ * Broadcom SiliconBackplane chipcommon serial flash interface -+ * -+ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com> -+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> -+ * Copyright 2010, Broadcom Corporation -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include <linux/bcma/bcma.h> -+#include <linux/bcma/bcma_driver_chipcommon.h> -+#include <linux/delay.h> -+ -+#include "bcma_private.h" -+ -+#define NUM_RETRIES 3 -+ -+ -+/* Issue a serial flash command */ -+static inline void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode) -+{ -+ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, -+ BCMA_CC_FLASHCTL_START | opcode); -+ while (bcma_cc_read32(cc, BCMA_CC_FLASHCTL) & BCMA_CC_FLASHCTL_BUSY) -+ ; -+} -+ -+ -+static inline void bcma_sflash_write_u8(struct bcma_drv_cc *cc, -+ u32 offset, u8 byte) -+{ -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset); -+ bcma_cc_write32(cc, BCMA_CC_FLASHDATA, byte); -+} -+ -+/* Initialize serial flash access */ -+int bcma_sflash_init(struct bcma_drv_cc *cc) -+{ -+ u32 id, id2; -+ -+ memset(&cc->sflash, 0, sizeof(struct bcma_sflash)); -+ -+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { -+ case BCMA_CC_FLASHT_STSER: -+ /* Probe for ST chips */ -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP); -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0); -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES); -+ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA); -+ cc->sflash.blocksize = 64 * 1024; -+ switch (id) { -+ case 0x11: -+ /* ST M25P20 2 Mbit Serial Flash */ -+ cc->sflash.numblocks = 4; -+ break; -+ case 0x12: -+ /* ST M25P40 4 Mbit Serial Flash */ -+ cc->sflash.numblocks = 8; -+ break; -+ case 0x13: -+ /* ST M25P80 8 Mbit Serial Flash */ -+ cc->sflash.numblocks = 16; -+ break; -+ case 0x14: -+ /* ST M25P16 16 Mbit Serial Flash */ -+ cc->sflash.numblocks = 32; -+ break; -+ case 0x15: -+ /* ST M25P32 32 Mbit Serial Flash */ -+ cc->sflash.numblocks = 64; -+ break; -+ case 0x16: -+ /* ST M25P64 64 Mbit Serial Flash */ -+ cc->sflash.numblocks = 128; -+ break; -+ case 0x17: -+ /* ST M25FL128 128 Mbit Serial Flash */ -+ cc->sflash.numblocks = 256; -+ break; -+ case 0xbf: -+ /* All of the following flashes are SST with -+ * 4KB subsectors. Others should be added but -+ * We'll have to revamp the way we identify them -+ * since RES is not eough to disambiguate them. -+ */ -+ cc->sflash.blocksize = 4 * 1024; -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1); -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES); -+ id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA); -+ switch (id2) { -+ case 1: -+ /* SST25WF512 512 Kbit Serial Flash */ -+ case 0x48: -+ /* SST25VF512 512 Kbit Serial Flash */ -+ cc->sflash.numblocks = 16; -+ break; -+ case 2: -+ /* SST25WF010 1 Mbit Serial Flash */ -+ case 0x49: -+ /* SST25VF010 1 Mbit Serial Flash */ -+ cc->sflash.numblocks = 32; -+ break; -+ case 3: -+ /* SST25WF020 2 Mbit Serial Flash */ -+ case 0x43: -+ /* SST25VF020 2 Mbit Serial Flash */ -+ cc->sflash.numblocks = 64; -+ break; -+ case 4: -+ /* SST25WF040 4 Mbit Serial Flash */ -+ case 0x44: -+ /* SST25VF040 4 Mbit Serial Flash */ -+ case 0x8d: -+ /* SST25VF040B 4 Mbit Serial Flash */ -+ cc->sflash.numblocks = 128; -+ break; -+ case 5: -+ /* SST25WF080 8 Mbit Serial Flash */ -+ case 0x8e: -+ /* SST25VF080B 8 Mbit Serial Flash */ -+ cc->sflash.numblocks = 256; -+ break; -+ case 0x41: -+ /* SST25VF016 16 Mbit Serial Flash */ -+ cc->sflash.numblocks = 512; -+ break; -+ case 0x4a: -+ /* SST25VF032 32 Mbit Serial Flash */ -+ cc->sflash.numblocks = 1024; -+ break; -+ case 0x4b: -+ /* SST25VF064 64 Mbit Serial Flash */ -+ cc->sflash.numblocks = 2048; -+ break; -+ } -+ break; -+ } -+ break; -+ -+ case BCMA_CC_FLASHT_ATSER: -+ /* Probe for Atmel chips */ -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS); -+ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c; -+ switch (id) { -+ case 0xc: -+ /* Atmel AT45DB011 1Mbit Serial Flash */ -+ cc->sflash.blocksize = 256; -+ cc->sflash.numblocks = 512; -+ break; -+ case 0x14: -+ /* Atmel AT45DB021 2Mbit Serial Flash */ -+ cc->sflash.blocksize = 256; -+ cc->sflash.numblocks = 1024; -+ break; -+ case 0x1c: -+ /* Atmel AT45DB041 4Mbit Serial Flash */ -+ cc->sflash.blocksize = 256; -+ cc->sflash.numblocks = 2048; -+ break; -+ case 0x24: -+ /* Atmel AT45DB081 8Mbit Serial Flash */ -+ cc->sflash.blocksize = 256; -+ cc->sflash.numblocks = 4096; -+ break; -+ case 0x2c: -+ /* Atmel AT45DB161 16Mbit Serial Flash */ -+ cc->sflash.blocksize = 512; -+ cc->sflash.numblocks = 4096; -+ break; -+ case 0x34: -+ /* Atmel AT45DB321 32Mbit Serial Flash */ -+ cc->sflash.blocksize = 512; -+ cc->sflash.numblocks = 8192; -+ break; -+ case 0x3c: -+ /* Atmel AT45DB642 64Mbit Serial Flash */ -+ cc->sflash.blocksize = 1024; -+ cc->sflash.numblocks = 8192; -+ break; -+ } -+ break; -+ } -+ -+ cc->sflash.size = cc->sflash.blocksize * cc->sflash.numblocks; -+ -+ return cc->sflash.size ? 0 : -ENODEV; -+} -+ -+/* Read len bytes starting at offset into buf. Returns number of bytes read. */ -+int bcma_sflash_read(struct bcma_drv_cc *cc, u32 offset, u32 len, u8 *buf) -+{ -+ u8 *from, *to; -+ u32 cnt, i; -+ -+ if (!len) -+ return 0; -+ -+ if ((offset + len) > cc->sflash.size) -+ return -EINVAL; -+ -+ if ((len >= 4) && (offset & 3)) -+ cnt = 4 - (offset & 3); -+ else if ((len >= 4) && ((u32)buf & 3)) -+ cnt = 4 - ((u32)buf & 3); -+ else -+ cnt = len; -+ -+ from = (u8 *)KSEG0ADDR(BCMA_FLASH2 + offset); -+ -+ to = (u8 *)buf; -+ -+ if (cnt < 4) { -+ for (i = 0; i < cnt; i++) { -+ *to = readb(from); -+ from++; -+ to++; -+ } -+ return cnt; -+ } -+ -+ while (cnt >= 4) { -+ *(u32 *)to = readl(from); -+ from += 4; -+ to += 4; -+ cnt -= 4; -+ } -+ -+ return len - cnt; -+} -+ -+/* Poll for command completion. Returns zero when complete. */ -+int bcma_sflash_poll(struct bcma_drv_cc *cc, u32 offset) -+{ -+ if (offset >= cc->sflash.size) -+ return -22; -+ -+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { -+ case BCMA_CC_FLASHT_STSER: -+ /* Check for ST Write In Progress bit */ -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RDSR); -+ return bcma_cc_read32(cc, BCMA_CC_FLASHDATA) -+ & BCMA_CC_FLASHDATA_ST_WIP; -+ case BCMA_CC_FLASHT_ATSER: -+ /* Check for Atmel Ready bit */ -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS); -+ return !(bcma_cc_read32(cc, BCMA_CC_FLASHDATA) -+ & BCMA_CC_FLASHDATA_AT_READY); -+ } -+ -+ return 0; -+} -+ -+ -+static int sflash_st_write(struct bcma_drv_cc *cc, u32 offset, u32 len, -+ const u8 *buf) -+{ -+ int written = 1; -+ -+ /* Enable writes */ -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN); -+ bcma_sflash_write_u8(cc, offset, *buf++); -+ /* Issue a page program with CSA bit set */ -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_CSA | BCMA_CC_FLASHCTL_ST_PP); -+ offset++; -+ len--; -+ while (len > 0) { -+ if ((offset & 255) == 0) { -+ /* Page boundary, poll droping cs and return */ -+ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0); -+ udelay(1); -+ if (!bcma_sflash_poll(cc, offset)) { -+ /* Flash rejected command */ -+ return -EAGAIN; -+ } -+ return written; -+ } else { -+ /* Write single byte */ -+ bcma_sflash_cmd(cc, -+ BCMA_CC_FLASHCTL_ST_CSA | -+ *buf++); -+ } -+ written++; -+ offset++; -+ len--; -+ } -+ /* All done, drop cs & poll */ -+ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0); -+ udelay(1); -+ if (!bcma_sflash_poll(cc, offset)) { -+ /* Flash rejected command */ -+ return -EAGAIN; -+ } -+ return written; -+} -+ -+static int sflash_at_write(struct bcma_drv_cc *cc, u32 offset, u32 len, -+ const u8 *buf) -+{ -+ struct bcma_sflash *sfl = &cc->sflash; -+ u32 page, byte, mask; -+ int ret = 0; -+ -+ mask = sfl->blocksize - 1; -+ page = (offset & ~mask) << 1; -+ byte = offset & mask; -+ /* Read main memory page into buffer 1 */ -+ if (byte || (len < sfl->blocksize)) { -+ int i = 100; -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page); -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_LOAD); -+ /* 250 us for AT45DB321B */ -+ while (i > 0 && bcma_sflash_poll(cc, offset)) { -+ udelay(10); -+ i--; -+ } -+ BUG_ON(!bcma_sflash_poll(cc, offset)); -+ } -+ /* Write into buffer 1 */ -+ for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) { -+ bcma_sflash_write_u8(cc, byte++, *buf++); -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_WRITE); -+ } -+ /* Write buffer 1 into main memory page */ -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page); -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM); -+ -+ return ret; -+} -+ -+/* Write len bytes starting at offset into buf. Returns number of bytes -+ * written. Caller should poll for completion. -+ */ -+int bcma_sflash_write(struct bcma_drv_cc *cc, u32 offset, u32 len, -+ const u8 *buf) -+{ -+ struct bcma_sflash *sfl; -+ int ret = 0, tries = NUM_RETRIES; -+ -+ if (!len) -+ return 0; -+ -+ if ((offset + len) > cc->sflash.size) -+ return -EINVAL; -+ -+ sfl = &cc->sflash; -+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { -+ case BCMA_CC_FLASHT_STSER: -+ do { -+ ret = sflash_st_write(cc, offset, len, buf); -+ tries--; -+ } while (ret == -EAGAIN && tries > 0); -+ -+ if (ret == -EAGAIN && tries == 0) { -+ pr_info("ST Flash rejected write\n"); -+ ret = -EIO; -+ } -+ break; -+ case BCMA_CC_FLASHT_ATSER: -+ ret = sflash_at_write(cc, offset, len, buf); -+ break; -+ } -+ -+ return ret; -+} -+ -+/* Erase a region. Returns number of bytes scheduled for erasure. -+ * Caller should poll for completion. -+ */ -+int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset) -+{ -+ struct bcma_sflash *sfl; -+ -+ if (offset >= cc->sflash.size) -+ return -EINVAL; -+ -+ sfl = &cc->sflash; -+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { -+ case BCMA_CC_FLASHT_STSER: -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN); -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset); -+ /* Newer flashes have "sub-sectors" which can be erased independently -+ * with a new command: ST_SSE. The ST_SE command erases 64KB just as -+ * before. -+ */ -+ if (sfl->blocksize < (64 * 1024)) -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_SSE); -+ else -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_SE); -+ return sfl->blocksize; -+ case BCMA_CC_FLASHT_ATSER: -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset << 1); -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_PAGE_ERASE); -+ return sfl->blocksize; -+ } -+ -+ return 0; -+} ---- a/drivers/bcma/driver_mips.c -+++ b/drivers/bcma/driver_mips.c -@@ -185,7 +185,13 @@ static void bcma_core_mips_flash_detect( - switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { - case BCMA_CC_FLASHT_STSER: - case BCMA_CC_FLASHT_ATSER: -- pr_err("Serial flash not supported.\n"); -+#ifdef CONFIG_BCMA_SFLASH -+ pr_info("found serial flash.\n"); -+ bus->drv_cc.flash_type = BCMA_SFLASH; -+ bcma_sflash_init(&bus->drv_cc); -+#else -+ pr_info("serial flash not supported.\n"); -+#endif /* CONFIG_BCMA_SFLASH */ - break; - case BCMA_CC_FLASHT_PARA: - pr_info("found parallel flash.\n"); ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -399,6 +399,7 @@ struct bcma_chipcommon_pmu { - #ifdef CONFIG_BCMA_DRIVER_MIPS - enum bcma_flash_type { - BCMA_PFLASH, -+ BCMA_SFLASH, - }; - - struct bcma_pflash { -@@ -407,6 +408,14 @@ struct bcma_pflash { - u32 window_size; - }; - -+#ifdef CONFIG_BCMA_SFLASH -+struct bcma_sflash { -+ u32 blocksize; /* Block size */ -+ u32 numblocks; /* Number of blocks */ -+ u32 size; /* Total size in bytes */ -+}; -+#endif /* CONFIG_BCMA_SFLASH */ -+ - struct bcma_serial_port { - void *regs; - unsigned long clockspeed; -@@ -429,6 +438,9 @@ struct bcma_drv_cc { - enum bcma_flash_type flash_type; - union { - struct bcma_pflash pflash; -+#ifdef CONFIG_BCMA_SFLASH -+ struct bcma_sflash sflash; -+#endif /* CONFIG_BCMA_SFLASH */ - }; - - int nr_serial_ports; -@@ -483,4 +495,14 @@ extern void bcma_chipco_chipctl_maskset( - extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, - u32 offset, u32 mask, u32 set); - -+#ifdef CONFIG_BCMA_SFLASH -+/* Chipcommon sflash support. */ -+int bcma_sflash_read(struct bcma_drv_cc *cc, u32 offset, u32 len, -+ u8 *buf); -+int bcma_sflash_poll(struct bcma_drv_cc *cc, u32 offset); -+int bcma_sflash_write(struct bcma_drv_cc *cc, u32 offset, u32 len, -+ const u8 *buf); -+int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset); -+#endif /* CONFIG_BCMA_SFLASH */ -+ - #endif /* LINUX_BCMA_DRIVER_CC_H_ */ |