aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/imx6/patches-4.19/003-ARM-dts-imx-Add-GW5913-board-support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/imx6/patches-4.19/003-ARM-dts-imx-Add-GW5913-board-support.patch')
-rw-r--r--target/linux/imx6/patches-4.19/003-ARM-dts-imx-Add-GW5913-board-support.patch449
1 files changed, 449 insertions, 0 deletions
diff --git a/target/linux/imx6/patches-4.19/003-ARM-dts-imx-Add-GW5913-board-support.patch b/target/linux/imx6/patches-4.19/003-ARM-dts-imx-Add-GW5913-board-support.patch
new file mode 100644
index 0000000000..2d242fb890
--- /dev/null
+++ b/target/linux/imx6/patches-4.19/003-ARM-dts-imx-Add-GW5913-board-support.patch
@@ -0,0 +1,449 @@
+From 169e12f99cf9d5fce752564f32fd8df96461de43 Mon Sep 17 00:00:00 2001
+From: Robert Jones <rjones@gateworks.com>
+Date: Wed, 8 Jan 2020 07:44:23 -0800
+Subject: [PATCH 3/4] ARM: dts: imx: Add GW5913 board support
+
+The Gateworks GW5913 is an IMX6 SoC based single board computer with:
+ - IMX6Q or IMX6DL
+ - 32bit DDR3 DRAM
+ - FEC GbE RJ45 front-panel
+ - 1x miniPCIe socket with PCI Gen2, USB2
+ - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM
+ - 6V to 60V DC input connector
+ - GPS (ublox ZOE-M8Q)
+ - bi-color front-panel LED
+ - 256MB NAND boot device
+ - nanoSIM socket
+ - user pushbutton
+ - Gateworks System Controller (hwmon, pushbutton controller, EEPROM)
+
+Signed-off-by: Robert Jones <rjones@gateworks.com>
+Reviewed-by: Tim Harvey <tharvey@gateworks.com>
+Signed-off-by: Shawn Guo <shawnguo@kernel.org>
+---
+ arch/arm/boot/dts/Makefile | 2 +
+ arch/arm/boot/dts/imx6dl-gw5913.dts | 14 ++
+ arch/arm/boot/dts/imx6q-gw5913.dts | 14 ++
+ arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 348 ++++++++++++++++++++++++++++++++++
+ 4 files changed, 378 insertions(+)
+ create mode 100644 arch/arm/boot/dts/imx6dl-gw5913.dts
+ create mode 100644 arch/arm/boot/dts/imx6q-gw5913.dts
+ create mode 100644 arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 85e53cc..5b059fc 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -424,6 +424,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
+ imx6dl-gw5904.dtb \
+ imx6dl-gw5907.dtb \
+ imx6dl-gw5910.dtb \
++ imx6dl-gw5913.dtb \
+ imx6dl-hummingboard.dtb \
+ imx6dl-hummingboard-emmc-som-v15.dtb \
+ imx6dl-hummingboard-som-v15.dtb \
+@@ -497,6 +498,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
+ imx6q-gw5904.dtb \
+ imx6q-gw5907.dtb \
+ imx6q-gw5910.dtb \
++ imx6q-gw5913.dtb \
+ imx6q-h100.dtb \
+ imx6q-hummingboard.dtb \
+ imx6q-hummingboard-emmc-som-v15.dtb \
+diff --git a/arch/arm/boot/dts/imx6dl-gw5913.dts b/arch/arm/boot/dts/imx6dl-gw5913.dts
+new file mode 100644
+index 00000000..b74e533
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6dl-gw5913.dts
+@@ -0,0 +1,14 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright 2019 Gateworks Corporation
++ */
++
++/dts-v1/;
++
++#include "imx6dl.dtsi"
++#include "imx6qdl-gw5913.dtsi"
++
++/ {
++ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913";
++ compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl";
++};
+diff --git a/arch/arm/boot/dts/imx6q-gw5913.dts b/arch/arm/boot/dts/imx6q-gw5913.dts
+new file mode 100644
+index 00000000..6f511f1
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6q-gw5913.dts
+@@ -0,0 +1,14 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright 2019 Gateworks Corporation
++ */
++
++/dts-v1/;
++
++#include "imx6q.dtsi"
++#include "imx6qdl-gw5913.dtsi"
++
++/ {
++ model = "Gateworks Ventana i.MX6 Dual/Quad GW5913";
++ compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q";
++};
+diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+new file mode 100644
+index 00000000..635c203
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+@@ -0,0 +1,348 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright 2019 Gateworks Corporation
++ */
++
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++ /* these are used by bootloader for disabling nodes */
++ aliases {
++ led0 = &led0;
++ led1 = &led1;
++ nand = &gpmi;
++ usb0 = &usbh1;
++ usb1 = &usbotg;
++ };
++
++ chosen {
++ stdout-path = &uart2;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_gpio_leds>;
++
++ led0: user1 {
++ label = "user1";
++ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
++ default-state = "on";
++ linux,default-trigger = "heartbeat";
++ };
++
++ led1: user2 {
++ label = "user2";
++ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
++ default-state = "off";
++ };
++ };
++
++ memory@10000000 {
++ device_type = "memory";
++ reg = <0x10000000 0x20000000>;
++ };
++
++ pps {
++ compatible = "pps-gpio";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_pps>;
++ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
++ status = "okay";
++ };
++
++ reg_3p3v: regulator-3p3v {
++ compatible = "regulator-fixed";
++ regulator-name = "3P3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ reg_5p0v: regulator-5p0v {
++ compatible = "regulator-fixed";
++ regulator-name = "5P0V";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-always-on;
++ };
++};
++
++&fec {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_enet>;
++ phy-mode = "rgmii-id";
++ status = "okay";
++};
++
++&gpmi {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_gpmi_nand>;
++ status = "okay";
++};
++
++&i2c1 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c1>;
++ status = "okay";
++
++ gpio@23 {
++ compatible = "nxp,pca9555";
++ reg = <0x23>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++
++ eeprom@50 {
++ compatible = "atmel,24c02";
++ reg = <0x50>;
++ pagesize = <16>;
++ };
++
++ eeprom@51 {
++ compatible = "atmel,24c02";
++ reg = <0x51>;
++ pagesize = <16>;
++ };
++
++ eeprom@52 {
++ compatible = "atmel,24c02";
++ reg = <0x52>;
++ pagesize = <16>;
++ };
++
++ eeprom@53 {
++ compatible = "atmel,24c02";
++ reg = <0x53>;
++ pagesize = <16>;
++ };
++
++ rtc@68 {
++ compatible = "dallas,ds1672";
++ reg = <0x68>;
++ };
++};
++
++&i2c2 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c2>;
++ status = "okay";
++};
++
++&i2c3 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c3>;
++ status = "okay";
++};
++
++&pcie {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_pcie>;
++ reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
++ status = "okay";
++};
++
++&pwm2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
++ status = "disabled";
++};
++
++&pwm3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
++ status = "disabled";
++};
++
++&pwm4 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
++ status = "disabled";
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart1>;
++ status = "okay";
++};
++
++&uart2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart2>;
++ status = "okay";
++};
++
++&uart3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart3>;
++ status = "okay";
++};
++
++&uart5 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart5>;
++ status = "okay";
++};
++
++&usbotg {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usbotg>;
++ disable-over-current;
++ status = "okay";
++};
++
++&usbh1 {
++ status = "okay";
++};
++
++&wdog1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_wdog>;
++ fsl,ext-reset-output;
++};
++
++&iomuxc {
++ pinctrl_enet: enetgrp {
++ fsl,pins = <
++ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
++ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
++ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
++ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
++ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
++ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
++ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
++ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
++ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
++ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
++ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
++ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
++ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
++ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
++ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
++ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
++ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
++ >;
++ };
++
++ pinctrl_gpio_leds: gpioledsgrp {
++ fsl,pins = <
++ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
++ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
++ >;
++ };
++
++ pinctrl_gpmi_nand: gpminandgrp {
++ fsl,pins = <
++ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
++ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
++ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
++ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
++ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
++ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
++ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
++ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
++ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
++ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
++ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
++ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
++ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
++ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
++ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
++ >;
++ };
++
++ pinctrl_i2c1: i2c1grp {
++ fsl,pins = <
++ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
++ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
++ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
++ >;
++ };
++
++ pinctrl_i2c2: i2c2grp {
++ fsl,pins = <
++ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
++ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
++ >;
++ };
++
++ pinctrl_i2c3: i2c3grp {
++ fsl,pins = <
++ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
++ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
++ >;
++ };
++
++ pinctrl_pcie: pciegrp {
++ fsl,pins = <
++ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
++ >;
++ };
++
++ pinctrl_pps: ppsgrp {
++ fsl,pins = <
++ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b1
++ >;
++ };
++
++ pinctrl_pwm2: pwm2grp {
++ fsl,pins = <
++ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
++ >;
++ };
++
++ pinctrl_pwm3: pwm3grp {
++ fsl,pins = <
++ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
++ >;
++ };
++
++ pinctrl_pwm4: pwm4grp {
++ fsl,pins = <
++ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
++ >;
++ };
++
++ pinctrl_uart1: uart1grp {
++ fsl,pins = <
++ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
++ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
++ >;
++ };
++
++ pinctrl_uart2: uart2grp {
++ fsl,pins = <
++ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
++ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
++ >;
++ };
++
++ pinctrl_uart3: uart3grp {
++ fsl,pins = <
++ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
++ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
++ >;
++ };
++
++ pinctrl_uart5: uart5grp {
++ fsl,pins = <
++ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
++ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
++ >;
++ };
++
++ pinctrl_usbotg: usbotggrp {
++ fsl,pins = <
++ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
++ >;
++ };
++
++ pinctrl_wdog: wdoggrp {
++ fsl,pins = <
++ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
++ >;
++ };
++};
+--
+2.7.4
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-04 20:37:35 +0000