diff options
Diffstat (limited to 'target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts')
-rw-r--r-- | target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts | 316 |
1 files changed, 0 insertions, 316 deletions
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts deleted file mode 100644 index 53824e3c8d..0000000000 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts +++ /dev/null @@ -1,316 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "GL.iNet GL-B1300"; - compatible = "glinet,gl-b1300", "qcom,ipq4019"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - reserved-memory { - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - - apps_bl@87000000 { - reg = <0x87000000 0x400000>; - no-map; - }; - - sbl@87400000 { - reg = <0x87400000 0x100000>; - no-map; - }; - - cnss_debug@87500000 { - reg = <0x87500000 0x600000>; - no-map; - }; - - cpu_context_dump@87b00000 { - reg = <0x87b00000 0x080000>; - no-map; - }; - - tz_apps@87b80000 { - reg = <0x87b80000 0x280000>; - no-map; - }; - - smem@87e00000 { - reg = <0x87e00000 0x080000>; - no-map; - }; - - tz@87e80000 { - reg = <0x87e80000 0x180000>; - no-map; - }; - }; - - soc { - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "ok"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - pinctrl@1000000 { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio54"; - }; - pinconf { - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - }; - - blsp_dma: dma@7884000 { - status = "ok"; - }; - - spi_0: spi@78b5000 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "ok"; - cs-gpios = <&tlmm 54 0>; - }; - - serial@78af000 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "ok"; - }; - - cryptobam: dma@8e04000 { - status = "ok"; - }; - - crypto@8e3a000 { - status = "ok"; - }; - - watchdog@b017000 { - status = "ok"; - }; - - usb3_ss_phy: ssphy@9a000 { - status = "ok"; - }; - - usb3_hs_phy: hsphy@a6000 { - status = "ok"; - }; - - usb3: usb3@8af8800 { - status = "ok"; - }; - - usb2_hs_phy: hsphy@a8000 { - status = "ok"; - }; - - usb2: usb2@60f8800 { - status = "ok"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - wifi@a000000 { - status = "okay"; - }; - - wifi@a800000 { - status = "okay"; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - power { - label = "gl-b1300:green:power"; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - mesh { - label = "gl-b1300:green:mesh"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - wlan { - label = "gl-b1300:green:wlan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&spi_0 { - mx25l25635f@0 { - compatible = "mx25l25635f", "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - MIBIB@40000 { - label = "MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - QSEE@60000 { - label = "QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - CDT@c0000 { - label = "CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - DDRPARAMS@d0000 { - label = "DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - APPSBLENV@e0000 { - label = "APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - APPSBL@f0000 { - label = "APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - ART@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - }; - kernel@180000 { - label = "kernel"; - reg = <0x180000 0x400000>; - }; - rootfs@580000 { - label = "rootfs"; - reg = <0x580000 0x1a80000>; - }; - firmware@180000 { - label = "firmware"; - reg = <0x180000 0x1e80000>; - }; - }; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -};
\ No newline at end of file |