diff options
Diffstat (limited to 'target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts')
-rw-r--r-- | target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts | 267 |
1 files changed, 0 insertions, 267 deletions
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts deleted file mode 100644 index e9b96b996a..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts +++ /dev/null @@ -1,267 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "AVM FRITZ!Repeater 1200"; - compatible = "avm,fritzrepeater-1200"; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_red; - label-mac-device = &wifi0; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ - switch_lan_bmp = <0x0>; /* lan port bitmap */ - switch_wan_bmp = <0x10>; /* wan port bitmap */ - }; - - edma@c080000 { - status = "okay"; - phy-mode = "rgmii-rxid"; - qcom,num_gmac = <1>; - qcom,single-phy; - }; - }; - - key { - compatible = "gpio-keys"; - - wps { - label = "WPS button"; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_red: power_red { - label = "fritzwlan-1200:red:power"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - power_green: power_green { - label = "fritzwlan-1200:green:power"; - gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; - - power_yellow { - label = "fritzwlan-1200:yellow:power"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - phy-reset { - line-name = "PHY-reset"; - gpios = <19 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; - - phy-reset-2 { - line-name = "PHY-reset-2"; - gpios = <47 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x80000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x80000>; - read-only; - }; - - partition@180000 { - label = "CDT"; - reg = <0x180000 0x40000>; - read-only; - }; - - partition@1c0000 { - label = "QSEE_B"; - reg = <0x1c0000 0x80000>; - read-only; - }; - - partition@240000 { - label = "urlader0"; - reg = <0x240000 0x40000>; - read-only; - }; - - partition@280000 { - label = "urlader1"; - reg = <0x280000 0x40000>; - read-only; - }; - - partition@2c0000 { - label = "nand-tffs"; - reg = <0x2c0000 0x840000>; - read-only; - }; - - partition@b00000 { - /* 'kernel1' in AVM firmware */ - label = "uboot0"; - reg = <0xb00000 0x400000>; - }; - - partition@f00000 { - /* 'kernel2' in AVM firmware */ - label = "uboot1"; - reg = <0xf00000 0x400000>; - }; - - partition@1300000 { - label = "ubi"; - reg = <0x1300000 0x6d00000>; - }; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <0>; - qcom,poll_required = <1>; - vlan_tag = <0 0x20>; -}; |