diff options
Diffstat (limited to 'target/linux/ipq40xx/files/arch/arm')
38 files changed, 182 insertions, 182 deletions
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts index 33c44a8097..d866f8dd1a 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts @@ -105,18 +105,18 @@ compatible = "gpio-leds"; red { - label = "a42:red:status"; + label = "red:status"; gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-off"; }; power: green { - label = "a42:green:status"; + label = "green:status"; gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; }; blue { - label = "a42:blue:status"; + label = "blue:status"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-off"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts index e21c40cae0..28d27d9959 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts @@ -30,24 +30,24 @@ compatible = "gpio-leds"; status: status { - label = "ap120c-ac:blue:status"; + label = "blue:status"; gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; default-state = "keep"; }; wan { - label = "ap120c-ac:amber:wan"; + label = "amber:wan"; gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>; }; wlan2g { - label = "ap120c-ac:green:wlan2g"; + label = "green:wlan2g"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wlan5g { - label = "ap120c-ac:red:wlan5g"; + label = "red:wlan5g"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts index 2ca2acee19..062826c7a4 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts @@ -78,17 +78,17 @@ compatible = "gpio-leds"; led_status_red: status_red { - label = "cs-w3-wd1200g-eup:red:status"; + label = "red:status"; gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; }; led_status_green: status_green { - label = "cs-w3-wd1200g-eup:green:status"; + label = "green:status"; gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; }; led_status_blue: status_blue { - label = "cs-w3-wd1200g-eup:blue:status"; + label = "blue:status"; gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts index 17d9215544..e3afddb376 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts @@ -67,12 +67,12 @@ compatible = "gpio-leds"; led_red: red { - label = "dap-2610:red:power"; + label = "red:power"; gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; }; led_green: green { - label = "dap-2610:green:power"; + label = "green:power"; gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts index 2f9a890485..cfaba0f411 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts @@ -98,7 +98,7 @@ compatible = "gpio-leds"; power: status { - label = "EA6350v3:green:status"; + label = "green:status"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts index 32fded4c0e..f08ddd0abe 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts @@ -78,27 +78,27 @@ compatible = "gpio-leds"; power: orange { - label = "eap1300:orange:power"; + label = "orange:power"; gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; }; lan { - label = "eap1300:blue:lan"; + label = "blue:lan"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; }; mesh { - label = "eap1300:blue:mesh"; + label = "blue:mesh"; gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; }; wlan2g { - label = "eap1300:blue:wlan2g"; + label = "blue:wlan2g"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; wlan5g { - label = "eap1300:yellow:wlan5g"; + label = "yellow:wlan5g"; gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts index 3f7e2ad6fd..244dfac750 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts @@ -32,17 +32,17 @@ compatible = "gpio-leds"; led_power: power { - label = "ecw5211:yellow:power"; + label = "yellow:power"; gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; }; wlan2g { - label = "ecw5211:green:wlan2g"; + label = "green:wlan2g"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; wlan5g { - label = "ecw5211:green:wlan5g"; + label = "green:wlan5g"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts index cf4f793f21..b405867134 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts @@ -81,24 +81,24 @@ compatible = "gpio-leds"; led_power: power { - label = "emd1:white:power"; + label = "white:power"; gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; }; wlan2g { - label = "emd1:red:wlan2g"; + label = "red:wlan2g"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wlan5g { - label = "emd1:blue:wlan5g"; + label = "blue:wlan5g"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; mesh { - label = "emd1:orange:mesh"; + label = "orange:mesh"; gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts index 50067aaa91..848e5c2363 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts @@ -82,22 +82,22 @@ compatible = "gpio-leds"; power: white { - label = "emr3500:white:power"; + label = "white:power"; gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; }; blue { - label = "emr3500:blue"; + label = "blue"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; }; red { - label = "emr3500:red"; + label = "red"; gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; }; orange { - label = "emr3500:orange"; + label = "orange"; gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts index 8636b18b2e..b765d68b51 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts @@ -92,27 +92,27 @@ compatible = "gpio-leds"; power: power { - label = "ens620ext:amber:power"; + label = "amber:power"; gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; }; lan1 { - label = "ens620ext:green:lan1"; + label = "green:lan1"; gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; }; lan2 { - label = "ens620ext:green:lan2"; + label = "green:lan2"; gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; }; - wlan2G { - label = "ens620ext:green:wlan2G"; + wlan2g { + label = "green:wlan2g"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; - wlan5G { - label = "ens620ext:green:wlan5G"; + wlan5g { + label = "green:wlan5g"; gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi index cc70080c92..c026f70d05 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi @@ -120,47 +120,47 @@ compatible = "gpio-leds"; power_amber: power_amber { - label = "ex61x0v2:amber:power"; + label = "amber:power"; gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; }; power_green: power_green { - label = "ex61x0v2:green:power"; + label = "green:power"; gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; }; right { - label = "ex61x0v2:blue:right"; + label = "blue:right"; gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; }; left { - label = "ex61x0v2:blue:left"; + label = "blue:left"; gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; }; client_green { - label = "ex61x0v2:green:client"; + label = "green:client"; gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; }; client_red { - label = "ex61x0v2:red:client"; + label = "red:client"; gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; }; router_green { - label = "ex61x0v2:green:router"; + label = "green:router"; gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; }; router_red { - label = "ex61x0v2:red:router"; + label = "red:router"; gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; }; wps { - label = "ex61x0v2:green:wps"; + label = "green:wps"; gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts index b2a32946d9..fb1762cc05 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts @@ -109,33 +109,33 @@ compatible = "gpio-leds"; wlan { - label = "fritz4040:green:wlan"; + label = "green:wlan"; gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>; }; panic: info_red { - label = "fritz4040:red:info"; + label = "red:info"; gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>; panic-indicator; }; wan { - label = "fritz4040:green:wan"; + label = "green:wan"; gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>; }; power: power { - label = "fritz4040:green:power"; + label = "green:power"; gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>; }; lan { - label = "fritz4040:green:lan"; + label = "green:lan"; gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>; }; flash: info_amber { - label = "fritz4040:amber:info"; + label = "amber:info"; gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts index 2e21b55325..62ba76802d 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts @@ -74,7 +74,7 @@ compatible = "gpio-leds"; led_status: status { - label = "meshpoint-one:blue:status"; + label = "blue:status"; gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts index a8c144f928..4d17325c8d 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts @@ -142,29 +142,29 @@ pinctrl-names = "default"; power: power { - label = "nbg6617:green:power"; + label = "green:power"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; usb { - label = "nbg6617:green:usb"; + label = "green:usb"; gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>; linux,default-trigger = "usbport"; }; - wlan2G { - label = "nbg6617:green:wlan2G"; + wlan2g { + label = "green:wlan2g"; gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; }; - wlan5G { - label = "nbg6617:green:wlan5G"; + wlan5g { + label = "green:wlan5g"; gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; }; wps { - label = "nbg6617:green:wps"; + label = "green:wps"; gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts index a0030f77ce..bd0c6b71df 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts @@ -118,36 +118,36 @@ compatible = "gpio-leds"; led_power: status { - label = "rt-ac58u:blue:status"; + label = "blue:status"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; wan { - label = "rt-ac58u:blue:wan"; + label = "blue:wan"; gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; }; wlan2G { - label = "rt-ac58u:blue:wlan2G"; + label = "blue:wlan2G"; gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wlan5G { - label = "rt-ac58u:blue:wlan5G"; + label = "blue:wlan5G"; gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; usb { - label = "rt-ac58u:blue:usb"; + label = "blue:usb"; gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; trigger-sources = <&usb3_port1>, <&usb3_port2>; linux,default-trigger = "usbport"; }; lan { - label = "rt-ac58u:blue:lan"; + label = "blue:lan"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts index 5932638da0..8fa5a31908 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts @@ -88,32 +88,32 @@ compatible = "gpio-leds"; wps { - label = "wre6606:green:wps"; + label = "green:wps"; gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; }; wlan5g_green { - label = "wre6606:green:wlan5g"; + label = "green:wlan5g"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; power: power { - label = "wre6606:green:power"; + label = "green:power"; gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; }; wlan5g_red { - label = "wre6606:red:wlan5g"; + label = "red:wlan5g"; gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; }; wlan2g_red { - label = "wre6606:red:wlan2g"; + label = "red:wlan2g"; gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; }; wlan2g_green { - label = "wre6606:green:wlan2g"; + label = "green:wlan2g"; gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts index 25bbd6b332..4c14f41b34 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts @@ -108,18 +108,18 @@ compatible = "gpio-leds"; red { - label = "a62:red:status"; + label = "red:status"; gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-off"; }; power: green { - label = "a62:green:status"; + label = "green:status"; gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; }; blue { - label = "a62:blue:status"; + label = "blue:status"; gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-off"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts index 0a15f003d1..167094d4a2 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts @@ -130,40 +130,40 @@ compatible = "gpio-leds"; usb { - label = "cm520-79f:blue:usb"; + label = "blue:usb"; gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "usbport"; trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>; }; led_sys: can { - label = "cm520-79f:blue:can"; + label = "blue:can"; gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; }; wan { - label = "cm520-79f:blue:wan"; + label = "blue:wan"; gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; }; lan1 { - label = "cm520-79f:blue:lan1"; + label = "blue:lan1"; gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; }; lan2 { - label = "cm520-79f:blue:lan2"; + label = "blue:lan2"; gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; }; wlan2g { - label = "cm520-79f:blue:wlan2g"; + label = "blue:wlan2g"; gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wlan5g { - label = "cm520-79f:blue:wlan5g"; + label = "blue:wlan5g"; gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi index f4af2ba25f..57d607849a 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi @@ -132,34 +132,34 @@ compatible = "gpio-leds"; led1 { - label = "e2600ac:green:wlan0"; + label = "green:wlan0"; gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; }; led2 { - label = "e2600ac:green:wlan1"; + label = "green:wlan1"; gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; }; led3 { - label = "e2600ac:green:usb"; + label = "green:usb"; gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>; linux,default-trigger = "usbport"; }; led4 { - label = "e2600ac:green:ctrl1"; + label = "green:ctrl1"; gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; }; led5 { - label = "e2600ac:green:ctrl2"; + label = "green:ctrl2"; gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; }; led6 { - label = "e2600ac:green:ctrl3"; + label = "green:ctrl3"; gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts index d8acf36c4a..5a738da33d 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts @@ -24,35 +24,35 @@ // Front panel LEDs, top to bottom led_plug: diag { - label = "ea8300:amber:plug"; + label = "amber:plug"; gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; }; led_world: internet { - label = "ea8300:amber:world"; + label = "amber:world"; gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; }; led_wps: wps { - label = "ea8300:white:wps"; + label = "white:wps"; gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; }; led_wps_amber: wps_amber { - label = "ea8300:amber:wps"; + label = "amber:wps"; gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; panic-indicator; }; led_linksys: pwr { - label = "ea8300:white:linksys"; + label = "white:linksys"; gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; }; // On back panel, above USB socket led_usb: usb { - label = "ea8300:green:usb"; + label = "green:usb"; gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts index ec3ce447cc..95e616695c 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts @@ -29,40 +29,40 @@ compatible = "gpio-leds"; led_power: power { - label = "eap2200:amber:power"; + label = "amber:power"; gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; }; lan1 { - label = "eap2200:blue:lan1"; + label = "blue:lan1"; gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; }; lan2 { - label = "eap2200:blue:lan2"; + label = "blue:lan2"; gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; }; wlan2g { - label = "eap2200:blue:wlan2g"; + label = "blue:wlan2g"; gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wlan5g { - label = "eap2200:yellow:wlan5g"; + label = "yellow:wlan5g"; gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; wlan5g2 { - label = "eap2200:yellow:wlan5g2"; + label = "yellow:wlan5g2"; gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy2tpt"; }; mode { - label = "eap2200:blue:mode"; + label = "blue:mode"; gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts index b04a61dc04..dcd336e712 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts @@ -101,32 +101,32 @@ compatible = "gpio-leds"; info_red: info_red { - label = "fritzbox-7530:red:info"; + label = "red:info"; gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; }; info_green: info { - label = "fritzbox-7530:green:info"; + label = "green:info"; gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; }; wlan { - label = "fritzbox-7530:green:wlan"; + label = "green:wlan"; gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; }; fon { - label = "fritzbox-7530:green:fon"; + label = "green:fon"; gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; }; power_green: power { - label = "fritzbox-7530:green:power"; + label = "green:power"; gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; }; wps { - label = "fritzbox-7530:green:wps"; + label = "green:wps"; gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts index e9b96b996a..3d90fdc286 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts @@ -82,17 +82,17 @@ compatible = "gpio-leds"; power_red: power_red { - label = "fritzwlan-1200:red:power"; + label = "red:power"; gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; }; power_green: power_green { - label = "fritzwlan-1200:green:power"; + label = "green:power"; gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; }; power_yellow { - label = "fritzwlan-1200:yellow:power"; + label = "yellow:power"; gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts index 6a132adade..2e4bfd69ba 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts @@ -82,22 +82,22 @@ compatible = "gpio-leds"; connect_red { - label = "fritzwlan-3000:red:connect"; + label = "red:connect"; gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; }; connect_green { - label = "fritzwlan-3000:green:connect"; + label = "green:connect"; gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; }; connect_blue { - label = "fritzwlan-3000:blue:connect"; + label = "blue:connect"; gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; }; power_led: power { - label = "fritzwlan-3000:green:power"; + label = "green:power"; gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts index 8fe7644a9b..49cf2cabfa 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts @@ -103,24 +103,24 @@ compatible = "gpio-leds"; led_status: status { - label = "habanero-dvk:green:status"; + label = "green:status"; gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; panic-indicator; }; led_upgrade: upgrade { - label = "habanero-dvk:green:upgrade"; + label = "green:upgrade"; gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; }; wlan2g { - label = "habanero-dvk:green:wlan2g"; + label = "green:wlan2g"; gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wlan5g { - label = "habanero-dvk:green:wlan5g"; + label = "green:wlan5g"; gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts index 92aaa927e2..5b86605daa 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts @@ -240,63 +240,63 @@ led_blue0: blue0 { chan-name = "blue0"; - label = "map-ac2200:blue:chan0"; + label = "blue:chan0"; led-cur = [fa]; max-cur = [ff]; }; blue1 { chan-name = "blue1"; - label = "map-ac2200:blue:chan1"; + label = "blue:chan1"; led-cur = [fa]; max-cur = [ff]; }; blue2 { chan-name = "blue2"; - label = "map-ac2200:blue:chan2"; + label = "blue:chan2"; led-cur = [fa]; max-cur = [ff]; }; led_green0: green0 { chan-name = "green0"; - label = "map-ac2200:green:chan0"; + label = "green:chan0"; led-cur = [fa]; max-cur = [ff]; }; green1 { chan-name = "green1"; - label = "map-ac2200:green:chan1"; + label = "green:chan1"; led-cur = [fa]; max-cur = [ff]; }; green2 { chan-name = "green2"; - label = "map-ac2200:green:chan2"; + label = "green:chan2"; led-cur = [fa]; max-cur = [ff]; }; led_red0: red0 { chan-name = "red0"; - label = "map-ac2200:red:chan0"; + label = "red:chan0"; led-cur = [fa]; max-cur = [ff]; }; red1 { chan-name = "red1"; - label = "map-ac2200:red:chan1"; + label = "red:chan1"; led-cur = [fa]; max-cur = [ff]; }; red2 { chan-name = "red2"; - label = "map-ac2200:red:chan2"; + label = "red:chan2"; led-cur = [fa]; max-cur = [ff]; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mr8300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mr8300.dts index a09730a9e8..057aa88028 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mr8300.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mr8300.dts @@ -19,25 +19,25 @@ compatible = "gpio-leds"; led_red: red { - label = "mr8300:red:alarm"; + label = "red:alarm"; gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; }; led_amber: amber { - label = "mr8300:amber:programming"; + label = "amber:programming"; gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; panic-indicator; }; led_blue: blue { - label = "mr8300:blue:power"; + label = "blue:power"; gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; }; // On back panel, above USB socket led_usb: usb { - label = "mr8300:green:usb"; + label = "green:usb"; gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts index 2a92a5d80f..69423ce02b 100755 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts @@ -125,17 +125,17 @@ compatible = "gpio-leds"; led_system: led_system { - label = "oap100:green:system"; + label = "green:system"; gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; }; led_2g { - label = "oap100:blue:wlan2g"; + label = "blue:wlan2g"; gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; }; led_5g { - label = "oap100:blue:wlan5g"; + label = "blue:wlan5g"; gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts index 2f17424e55..0caa0255d0 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts @@ -48,72 +48,72 @@ led_power_blue: power_blue { gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:power"; + label = "blue:power"; default-state = "on"; }; led_power_red: power_red { gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:red:power"; + label = "red:power"; }; tp28 { gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; - label = "rtl30vw:ext:tp28"; + label = "ext:tp28"; default-state = "keep"; }; tp27 { gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; - label = "rtl30vw:ext:tp27"; + label = "ext:tp27"; default-state = "keep"; }; wlan2g { gpios = <&led_gpio 8 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:wlan2g"; + label = "blue:wlan2g"; linux,default-trigger = "phy0tpt"; }; wlan5g { gpios = <&led_gpio 9 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:wlan5g"; + label = "blue:wlan5g"; linux,default-trigger = "phy1tpt"; }; wps { gpios = <&led_gpio 10 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:wps"; + label = "blue:wps"; }; voip { gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:voip"; + label = "blue:voip"; }; s1 { gpios = <&led_gpio 12 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s1"; + label = "blue:s1"; }; s2 { gpios = <&led_gpio 13 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s2"; + label = "blue:s2"; }; s3 { gpios = <&led_gpio 14 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s3"; + label = "blue:s3"; }; s4 { gpios = <&led_gpio 15 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s4"; + label = "blue:s4"; }; signal { gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:red:signal"; + label = "red:signal"; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi index c768e25ca0..4435d1fd28 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi @@ -110,7 +110,7 @@ pinctrl-names = "default"; led_status: led2 { - label = "u4019:green:led2"; + label = "green:led2"; gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts index 1977358525..cdf0cfe644 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts @@ -95,47 +95,47 @@ compatible = "gpio-leds"; led_power_white: power_white { - label = "wtr-m2133hp:white:power"; + label = "white:power"; gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; }; led_power_orange: power_orange { - label = "wtr-m2133hp:orange:power"; + label = "orange:power"; gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; }; led_power_blue: power_blue { - label = "wtr-m2133hp:blue:power"; + label = "blue:power"; gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>; }; router_white { - label = "wtr-m2133hp:white:router"; + label = "white:router"; gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; }; router_orange { - label = "wtr-m2133hp:orange:router"; + label = "orange:router"; gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; }; internet_white { - label = "wtr-m2133hp:white:internet"; + label = "white:internet"; gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>; }; internet_orange { - label = "wtr-m2133hp:orange:internet"; + label = "orange:internet"; gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; }; wireless_white { - label = "wtr-m2133hp:white:wireless"; + label = "white:wireless"; gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>; }; wireless_orange { - label = "wtr-m2133hp:orange:wireless"; + label = "orange:wireless"; gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts index 1bcf5e80bf..79f4c04edf 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts @@ -116,12 +116,12 @@ compatible = "gpio-leds"; status: rss4 { - label = "wpj428:green:rss4"; + label = "green:rss4"; gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; }; rss3 { - label = "wpj428:green:rss3"; + label = "green:rss3"; gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts index 00faa9840d..a3cecddd6e 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts @@ -18,24 +18,24 @@ compatible = "gpio-leds"; wifi_green { - label = "ap-303:green:wifi"; + label = "green:wifi"; gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wifi_amber { - label = "ap-303:amber:wifi"; + label = "amber:wifi"; gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; led_system_red: system_red { - label = "ap-303:red:system"; + label = "red:system"; gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; }; led_system_green: system_green { - label = "ap-303:green:system"; + label = "green:system"; gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts index c48bfb636a..707ed18e3b 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts @@ -108,34 +108,34 @@ compatible = "gpio-leds"; wifi_green { - label = "ap-303h:green:wifi"; + label = "green:wifi"; gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wifi_amber { - label = "ap-303h:amber:wifi"; + label = "amber:wifi"; gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; pse { - label = "ap-303h:green:pse"; + label = "green:pse"; gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; }; led_system_red: system_red { - label = "ap-303h:red:system"; + label = "red:system"; gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; }; led_system_green: system_green { - label = "ap-303h:green:system"; + label = "green:system"; gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>; }; led_system_amber: system_amber { - label = "ap-303h:amber:system"; + label = "amber:system"; gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts index c743ac4b4d..1d4e50292e 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts @@ -18,17 +18,17 @@ compatible = "gpio-leds"; led_system_red: system_red { - label = "ap-365:red:system"; + label = "red:system"; gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; }; led_system_green: system_green { - label = "ap-365:green:system"; + label = "green:system"; gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; }; system_amber { - label = "ap-365:amber:system"; + label = "amber:system"; gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts index b32eb29f8c..a735d8e3ac 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts @@ -121,18 +121,18 @@ compatible = "gpio-leds"; power: power { - label = "gl-b1300:green:power"; + label = "green:power"; gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; default-state = "on"; }; mesh { - label = "gl-b1300:green:mesh"; + label = "green:mesh"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; wlan { - label = "gl-b1300:green:wlan"; + label = "green:wlan"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts index b18e2515a3..fa859b73a3 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts @@ -107,18 +107,18 @@ compatible = "gpio-leds"; led_power: power { - label = "gl-s1300:green:power"; + label = "green:power"; gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>; default-state = "on"; }; mesh { - label = "gl-s1300:green:mesh"; + label = "green:mesh"; gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>; }; wlan { - label = "gl-s1300:green:wlan"; + label = "green:wlan"; gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts index 71057c7577..36a01e5053 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts @@ -117,7 +117,7 @@ compatible = "gpio-leds"; power_orange: power { - label = "mr33:orange:power"; + label = "orange:power"; gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; panic-indicator; }; @@ -169,25 +169,25 @@ /* RGB led */ status_red: chan0 { - chan-name = "mr33:red:status"; + chan-name = "red:status"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; }; status_green: chan1 { - chan-name = "mr33:green:status"; + chan-name = "green:status"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; }; chan2 { - chan-name = "mr33:blue:status"; + chan-name = "blue:status"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; }; chan3 { - chan-name = "mr33:white:status"; + chan-name = "white:status"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; }; |