1 files changed, 147 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch b/target/linux/ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch
new file mode 100644
index 0000000000..85ad64ced0
--- /dev/null
+++ b/target/linux/ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch
@@ -0,0 +1,147 @@
+diff --git a/qcom-ipq8064-rb3011.dts.orig b/qcom-ipq8064-rb3011.dts
+index 282b89ce3d..4faaa95b33 100644
+--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
++++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+@@ -24,73 +24,6 @@ memory@0 {
+ 		device_type = "memory";
+ 	};
+ 
+-	mdio0: mdio@0 {
+-		status = "okay";
+-		compatible = "virtual,mdio-gpio";
+-		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+-			<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+-		#address-cells = <1>;
+-		#size-cells = <0>;
+-
+-		pinctrl-0 = <&mdio0_pins>;
+-		pinctrl-names = "default";
+-
+-		switch0: switch@10 {
+-			compatible = "qca,qca8337";
+-			#address-cells = <1>;
+-			#size-cells = <0>;
+-
+-			dsa,member = <0 0>;
+-
+-			pinctrl-0 = <&sw0_reset_pin>;
+-			pinctrl-names = "default";
+-
+-			reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+-			reg = <0x10>;
+-
+-			ports {
+-				#address-cells = <1>;
+-				#size-cells = <0>;
+-
+-				switch0cpu: port@0 {
+-					reg = <0>;
+-					label = "cpu";
+-					ethernet = <&gmac0>;
+-					phy-mode = "rgmii-id";
+-					fixed-link {
+-						speed = <1000>;
+-						full-duplex;
+-					};
+-				};
+-
+-				port@1 {
+-					reg = <1>;
+-					label = "sw1";
+-				};
+-
+-				port@2 {
+-					reg = <2>;
+-					label = "sw2";
+-				};
+-
+-				port@3 {
+-					reg = <3>;
+-					label = "sw3";
+-				};
+-
+-				port@4 {
+-					reg = <4>;
+-					label = "sw4";
+-				};
+-
+-				port@5 {
+-					reg = <5>;
+-					label = "sw5";
+-				};
+-			};
+-		};
+-	};
+-
+ 	mdio1: mdio@1 {
+ 		status = "okay";
+ 		compatible = "virtual,mdio-gpio";
+@@ -216,6 +149,68 @@ led@7 {
+ 	};
+ };
+ 
++&mdio0 {
++	status = "okay";
++
++	pinctrl-0 = <&mdio0_pins>;
++	pinctrl-names = "default";
++
++	switch0: switch@10 {
++		compatible = "qca,qca8337";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		dsa,member = <0 0>;
++
++		pinctrl-0 = <&sw0_reset_pin>;
++		pinctrl-names = "default";
++
++		reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
++		reg = <0x10>;
++
++		ports {
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			switch0cpu: port@0 {
++				reg = <0>;
++				label = "cpu";
++				ethernet = <&gmac0>;
++				phy-mode = "rgmii-id";
++				fixed-link {
++					speed = <1000>;
++					full-duplex;
++				};
++			};
++
++			port@1 {
++				reg = <1>;
++				label = "sw1";
++			};
++
++			port@2 {
++				reg = <2>;
++				label = "sw2";
++			};
++
++			port@3 {
++				reg = <3>;
++				label = "sw3";
++			};
++
++			port@4 {
++				reg = <4>;
++				label = "sw4";
++			};
++
++			port@5 {
++				reg = <5>;
++				label = "sw5";
++			};
++		};
++	};
++};
++
+ &gmac0 {
+ 	status = "okay";
+