1 files changed, 0 insertions, 153 deletions
diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts
deleted file mode 100644
index a95f3faa00..0000000000
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts
+++ /dev/null
@@ -1,153 +0,0 @@
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-	compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
-	model = "BT OpenReach VDSL Modem";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-		led-upgrade = &power_green;
-
-		led-dsl = &dsl;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x2000000>;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		dsl: dsl {
-			label = "green:dsl";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-
-		/* power-* is a bicolour led */
-		power_green: power_green {
-			label = "green:power";
-			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		power_red: power_red {
-			label = "red:power";
-			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		power_led_blink {
-			gpio-export,name = "power_led_blink";
-			gpio-export,output = <0>;
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		lantiq,switch;
-
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "mii";
-			phy-handle = <&phy11>;
-		};
-
-		ethernet@3 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <3>;
-			phy-mode = "mii";
-			phy-handle = <&phy14>;
-		};
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-
-		phy14: ethernet-phy@14 {
-			reg = <0x14>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
-
-&gphy0 {
-	lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gphy1 {
-	lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&localbus {
-	flash@0 {
-		compatible = "lantiq,nor";
-		bank-width = <2>;
-		reg = <0 0x0 0x0800000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0 0x30000>;
-			};
-
-			partition@30000 {
-				label = "u-boot-env";
-				reg = <0x30000 0x10000>;
-			};
-
-			partition@40000 {
-				label = "firmware";
-				reg = <0x40000 0x750000>;
-			};
-
-			partition@790000 {
-				label = "ddrconfig";
-				reg = <0x790000 0x70000>;
-				read-only;
-			};
-		};
-	};
-};