diff options
Diffstat (limited to 'target/linux/layerscape/patches-5.4/302-dts-0097-LF-387-5-arm64-dts-layerscape-add-chip-specific-comp.patch')
| -rw-r--r-- | target/linux/layerscape/patches-5.4/302-dts-0097-LF-387-5-arm64-dts-layerscape-add-chip-specific-comp.patch | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0097-LF-387-5-arm64-dts-layerscape-add-chip-specific-comp.patch b/target/linux/layerscape/patches-5.4/302-dts-0097-LF-387-5-arm64-dts-layerscape-add-chip-specific-comp.patch new file mode 100644 index 0000000000..63f4372d4e --- /dev/null +++ b/target/linux/layerscape/patches-5.4/302-dts-0097-LF-387-5-arm64-dts-layerscape-add-chip-specific-comp.patch @@ -0,0 +1,150 @@ +From 4cb6a451112308b2679c567ac680bc74ab93a92a Mon Sep 17 00:00:00 2001 +From: Ran Wang <ran.wang_1@nxp.com> +Date: Fri, 22 Nov 2019 14:18:49 +0800 +Subject: [PATCH] LF-387-5 arm64: dts: layerscape: add chip-specific compatible + string to usb nodes + +To allow USB dwc3 driver to conduct some chip-scpeific configuring. +Cover all arm64 based Layerscape SoCs. + +Signed-off-by: Ran Wang <ran.wang_1@nxp.com> +Reviewed-by: Jun Li <jun.li@nxp.com> +Reviewed-by: Leo Li <leo.li@nxp.com> +--- + arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 +- + arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 6 +++--- + arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 6 +++--- + arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 4 ++-- + arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++-- + arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 4 ++-- + 6 files changed, 13 insertions(+), 13 deletions(-) + +--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +@@ -443,7 +443,7 @@ + }; + + usb0: usb3@2f00000 { +- compatible = "snps,dwc3"; ++ compatible = "fsl,ls1012a-dwc3", "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = <0 60 0x4>; + dr_mode = "host"; +--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +@@ -694,7 +694,7 @@ + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; + + usb0: usb3@2f00000 { +- compatible = "snps,dwc3"; ++ compatible = "fsl,ls1043a-dwc3", "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = <0 60 0x4>; + dr_mode = "host"; +@@ -708,7 +708,7 @@ + }; + + usb1: usb3@3000000 { +- compatible = "snps,dwc3"; ++ compatible = "fsl,ls1043a-dwc3", "snps,dwc3"; + reg = <0x0 0x3000000 0x0 0x10000>; + interrupts = <0 61 0x4>; + dr_mode = "host"; +@@ -722,7 +722,7 @@ + }; + + usb2: usb3@3100000 { +- compatible = "snps,dwc3"; ++ compatible = "fsl,ls1043a-dwc3", "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 63 0x4>; + dr_mode = "host"; +--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +@@ -593,7 +593,7 @@ + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; + + usb0: usb@2f00000 { +- compatible = "snps,dwc3"; ++ compatible = "fsl,ls1046a-dwc3", "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; +@@ -606,7 +606,7 @@ + }; + + usb1: usb@3000000 { +- compatible = "snps,dwc3"; ++ compatible = "fsl,ls1046a-dwc3", "snps,dwc3"; + reg = <0x0 0x3000000 0x0 0x10000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; +@@ -619,7 +619,7 @@ + }; + + usb2: usb@3100000 { +- compatible = "snps,dwc3"; ++ compatible = "fsl,ls1046a-dwc3", "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; +--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +@@ -394,7 +394,7 @@ + }; + + usb0: usb3@3100000 { +- compatible = "snps,dwc3"; ++ compatible = "fsl,ls1088a-dwc3", "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; +@@ -406,7 +406,7 @@ + }; + + usb1: usb3@3110000 { +- compatible = "snps,dwc3"; ++ compatible = "fsl,ls1088a-dwc3", "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; +--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi ++++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +@@ -730,7 +730,7 @@ + + usb0: usb3@3100000 { + status = "disabled"; +- compatible = "snps,dwc3"; ++ compatible = "fsl,ls2088a-dwc3", "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 80 0x4>; /* Level high type */ + dr_mode = "host"; +@@ -742,7 +742,7 @@ + + usb1: usb3@3110000 { + status = "disabled"; +- compatible = "snps,dwc3"; ++ compatible = "fsl,ls2088a-dwc3", "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <0 81 0x4>; /* Level high type */ + dr_mode = "host"; +--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi ++++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +@@ -864,7 +864,7 @@ + }; + + usb0: usb@3100000 { +- compatible = "snps,dwc3"; ++ compatible = "fsl,lx2160a-dwc3", "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; +@@ -878,7 +878,7 @@ + }; + + usb1: usb@3110000 { +- compatible = "snps,dwc3"; ++ compatible = "fsl,lx2160a-dwc3", "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; |