1 files changed, 0 insertions, 136 deletions
diff --git a/target/linux/mpc83xx/patches-2.6.35/025-rb600-dts-qe-boot-fixups.patch b/target/linux/mpc83xx/patches-2.6.35/025-rb600-dts-qe-boot-fixups.patch
deleted file mode 100644
index 2f6fdad547..0000000000
--- a/target/linux/mpc83xx/patches-2.6.35/025-rb600-dts-qe-boot-fixups.patch
+++ /dev/null
@@ -1,136 +0,0 @@
---- a/arch/powerpc/boot/dts/rb600.dts
-+++ b/arch/powerpc/boot/dts/rb600.dts
-@@ -20,9 +20,11 @@
- 	aliases {
- 		ethernet0 = &enet0;
- 		ethernet1 = &enet1;
-+		pci0 = &pci0;
- 	};
- 
- 	chosen {
-+		bootargs = "console=ttyS0,115200 board=mpc8323 rootfstype=squashfs,yaffs2,jffs2 root=/dev/mtdblock1 boot=1";
- 		linux,stdout-path = "/soc8343@e0000000/serial@4500";
- 	};
- 
-@@ -150,6 +152,45 @@
- 			device_type = "gpio";
- 		};
- 
-+		dma@82a8 {
-+                        #address-cells = <1>;
-+                        #size-cells = <1>;
-+                        compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
-+                        reg = <0x82a8 4>;
-+                        ranges = <0 0x8100 0x1a8>;
-+                        interrupt-parent = <&ipic>;
-+                        interrupts = <71 8>;
-+                        cell-index = <0>;
-+                        dma-channel@0 {
-+                                compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+                                reg = <0 0x80>;
-+                                cell-index = <0>;
-+                                interrupt-parent = <&ipic>;
-+                                interrupts = <71 8>;
-+                        };
-+                        dma-channel@80 {
-+                                compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+                                reg = <0x80 0x80>;
-+                                cell-index = <1>;
-+                                interrupt-parent = <&ipic>;
-+                                interrupts = <71 8>;
-+                        };
-+                        dma-channel@100 {
-+                                compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+                                reg = <0x100 0x80>;
-+                                cell-index = <2>;
-+                                interrupt-parent = <&ipic>;
-+                                interrupts = <71 8>;
-+                        };
-+                        dma-channel@180 {
-+                                compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+                                reg = <0x180 0x28>;
-+                                cell-index = <3>;
-+                                interrupt-parent = <&ipic>;
-+                                interrupts = <71 8>;
-+                        };
-+                };
-+
- 		enet0: ethernet@25000 {
- 			#address-cells = <1>;
- 			#size-cells = <1>;
---- a/arch/powerpc/boot/rb600.c
-+++ b/arch/powerpc/boot/rb600.c
-@@ -45,14 +45,6 @@ static void rb600_fixups(void)
- 	clock = fdt_getprop(fw_dtb, node, "clock-frequency", &size);
- 	dt_fixup_cpu_clocks(*clock, *timebase, 0);
- 
--	/* Fixup chosen
--	 * The bootloader reads the kernelparm segment and adds the content to
--	 * bootargs. This is needed to specify root and other boot flags.
--	 */
--	chosen = finddevice("/chosen");
--	node = fdt_path_offset(fw_dtb, "/chosen");
--	bootargs = fdt_getprop(fw_dtb, node, "bootargs", &size);
--	setprop_str(chosen, "bootargs", bootargs);
- }
- 
- void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
---- a/arch/powerpc/platforms/83xx/rbppc.c
-+++ b/arch/powerpc/platforms/83xx/rbppc.c
-@@ -56,6 +56,8 @@ static void *gtm;
- static int beeper_irq;
- static unsigned beeper_gpio_pin[2];
- 
-+int rb333model = 0;
-+
- irqreturn_t rbppc_timer_irq(int irq, void *ptr)
- {
- 	static int toggle = 0;
-@@ -120,6 +122,8 @@ static void __init rbppc_setup_arch(void
- 	}
- #endif
- 
-+if (rb333model) {
-+
- #ifdef CONFIG_QUICC_ENGINE
-         qe_reset();
- 
-@@ -132,6 +136,8 @@ static void __init rbppc_setup_arch(void
-         }
- #endif 
- 
-+}  /* RB333 */
-+
- }
- 
- void __init rbppc_init_IRQ(void)
-@@ -145,6 +151,8 @@ void __init rbppc_init_IRQ(void)
- 		of_node_put(np);
- 	}
- 
-+if (rb333model) {
-+
- #ifdef CONFIG_QUICC_ENGINE
-         np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-         if (!np) {
-@@ -156,6 +164,8 @@ void __init rbppc_init_IRQ(void)
-         of_node_put(np);
- #endif                          /* CONFIG_QUICC_ENGINE */
- 
-+}  /* RB333 */
-+
- }
- 
- static int __init rbppc_probe(void)
-@@ -167,8 +177,10 @@ static int __init rbppc_probe(void)
- 	if (!model)
- 		return 0;
- 
--	if (strcmp(model, "RB333") == 0)
-+	if (strcmp(model, "RB333") == 0) {
-+		rb333model = 1;
- 		return 1;
-+	}
- 
- 	if (strcmp(model, "RB600") == 0)
- 		return 1;