diff options
Diffstat (limited to 'target/linux/mvebu/base-files/etc')
5 files changed, 0 insertions, 228 deletions
diff --git a/target/linux/mvebu/base-files/etc/board.d/01_leds b/target/linux/mvebu/base-files/etc/board.d/01_leds deleted file mode 100755 index 14313ee664..0000000000 --- a/target/linux/mvebu/base-files/etc/board.d/01_leds +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2014-2016 OpenWrt.org -# Copyright (C) 2016 LEDE-Project.org -# - -. /lib/functions/uci-defaults.sh - -board_config_update - -board=$(board_name) - -case "$board" in -linksys,caiman) - ucidef_set_led_netdev "wan" "WAN" "pca963x:caiman:white:wan" "eth1" - ucidef_set_led_usbport "usb1" "USB 1" "pca963x:caiman:white:usb2" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB 2" "pca963x:caiman:white:usb3_1" "usb2-port1" "usb3-port1" - ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:caiman:white:usb3_2" "usb3-port1" - ;; -linksys,cobra) - ucidef_set_led_netdev "wan" "WAN" "pca963x:cobra:white:wan" "eth1" - ucidef_set_led_usbport "usb1" "USB 1" "pca963x:cobra:white:usb2" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB 2" "pca963x:cobra:white:usb3_1" "usb2-port1" "usb3-port1" - ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:cobra:white:usb3_2" "usb3-port1" - ;; -linksys,mamba) - ucidef_set_led_netdev "wan" "WAN" "mamba:white:wan" "eth1" - ucidef_set_led_usbport "usb1" "USB 1" "mamba:white:usb2" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB 2" "mamba:white:usb3_1" "usb2-port1" "usb3-port1" - ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "mamba:white:usb3_2" "usb3-port2" - ;; -linksys,rango) - ucidef_set_led_netdev "wan" "WAN" "pca963x:rango:white:wan" "eth1" - ucidef_set_led_usbport "usb1" "USB 1" "pca963x:rango:white:usb2" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB 2" "pca963x:rango:white:usb3_1" "usb2-port1" "usb3-port1" - ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:rango:white:usb3_2" "usb3-port1" - ;; -linksys,shelby) - ucidef_set_led_netdev "wan" "WAN" "pca963x:shelby:white:wan" "eth1" - ucidef_set_led_usbport "usb1" "USB 1" "pca963x:shelby:white:usb2" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB 2" "pca963x:shelby:white:usb3_1" "usb2-port1" "usb3-port1" - ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:shelby:white:usb3_2" "usb3-port1" - ;; -linksys,venom) - ucidef_set_led_netdev "wan" "WAN" "pca963x:venom:blue:wan" "eth1" - ucidef_set_led_usbport "usb1" "USB 1" "pca963x:venom:blue:usb2" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB 2" "pca963x:venom:blue:usb3_1" "usb2-port1" "usb3-port1" - ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:venom:blue:usb3_2" "usb3-port1" - ;; - -esac - -board_config_flush - -exit 0 diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network deleted file mode 100755 index 283a856258..0000000000 --- a/target/linux/mvebu/base-files/etc/board.d/02_network +++ /dev/null @@ -1,78 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2014-2016 OpenWrt.org -# Copyright (C) 2016 LEDE-Project.org -# - -. /lib/functions/uci-defaults.sh - -board_config_update - -board=$(board_name) - -case "$board" in -cznic,turris-omnia) - ucidef_set_interface_lan "lan0 lan1 lan2 lan3 lan4" - ucidef_set_interface_wan "eth2" - ;; -globalscale,espressobin|\ -globalscale,espressobin-emmc|\ -globalscale,espressobin-v7|\ -globalscale,espressobin-v7-emmc) - ucidef_set_interfaces_lan_wan "lan0 lan1" "wan" - ;; -linksys,caiman|\ -linksys,cobra|\ -linksys,mamba|\ -linksys,rango|\ -linksys,shelby|\ -linksys,venom) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2" - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0" "4:wan" "6@eth1" - ;; -marvell,a385-db-ap) - ucidef_set_interfaces_lan_wan "eth0 eth1" "eth2" - ;; -marvell,armada8040-mcbin) - ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2" - ;; -marvell,armada8040-db) - ucidef_set_interfaces_lan_wan "eth0 eth2 eth3" "eth1" - ;; -marvell,armada7040-db) - ucidef_set_interfaces_lan_wan "eth0 eth2" "eth1" - ;; -marvell,armada-3720-db) - ucidef_set_interfaces_lan_wan "eth1" "eth0" - ;; -marvell,axp-gp) - ucidef_set_interface_lan "eth0 eth1 eth2 eth3" - ;; -methode,udpu) - ucidef_set_interfaces_lan_wan "eth1" "eth0" - ;; -solidrun,clearfog-a1|solidrun,clearfog-pro-a1) - # eth0 is standalone ethernet - # eth1 is switch - # eth2 is SFP - ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2" - - # switch port 5 is connected to eth1 - ucidef_add_switch "switch0" \ - "0:lan:5" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5u@eth1" "6:lan:6" - ;; -solidrun,clearfog-base-a1) - # eth0 is standalone ethernet - # eth1 is standalone ethernet - # eth2 is SFP - ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2" - ;; -*) - ucidef_set_interface_lan "eth0" - ;; -esac - -board_config_flush - -exit 0 diff --git a/target/linux/mvebu/base-files/etc/init.d/bootcount b/target/linux/mvebu/base-files/etc/init.d/bootcount deleted file mode 100755 index dd2266bdc8..0000000000 --- a/target/linux/mvebu/base-files/etc/init.d/bootcount +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh /etc/rc.common - -START=99 - -boot() { - case $(board_name) in - linksys,caiman |\ - linksys,cobra |\ - linksys,mamba |\ - linksys,rango |\ - linksys,shelby |\ - linksys,venom) - mtd resetbc s_env || true - ;; - esac -} diff --git a/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless b/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless deleted file mode 100644 index 3c345ff148..0000000000 --- a/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless +++ /dev/null @@ -1,56 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2015 OpenWrt.org -# - -[ ! -e /etc/config/wireless ] && exit 0 - -. /lib/functions.sh -. /lib/functions/system.sh - -board=$(board_name) - -case "$board" in -linksys,caiman|linksys,cobra|linksys,mamba|linksys,shelby|linksys,venom) - SKU=$(strings /dev/mtd3|sed -ne 's/^cert_region=//p') - WIFIMAC2G=$(macaddr_add $(cat /sys/class/net/eth0/address) +1) - WIFIMAC5G=$(macaddr_add $WIFIMAC2G +1) - case "$SKU" in - AP) - REGD=CN - ;; - AU) - REGD=AU - ;; - CA) - REGD=CA - ;; - EU) - REGD=DE - ;; - US) - REGD=US - ;; - esac - - case "$board" in - linksys,mamba) - WIFIMAC0=$WIFIMAC2G - WIFIMAC1=$WIFIMAC5G - ;; - *) - WIFIMAC0=$WIFIMAC5G - WIFIMAC1=$WIFIMAC2G - ;; - esac - - uci get wireless.radio0.country || uci set wireless.radio0.country=$REGD - uci get wireless.@wifi-iface[0].macaddr || uci set wireless.@wifi-iface[0].macaddr=$WIFIMAC0 - uci get wireless.radio1.country || uci set wireless.radio1.country=$REGD - uci get wireless.@wifi-iface[1].macaddr || uci set wireless.@wifi-iface[1].macaddr=$WIFIMAC1 - ;; -esac - -uci commit wireless - -exit 0 diff --git a/target/linux/mvebu/base-files/etc/uci-defaults/04_mambafan b/target/linux/mvebu/base-files/etc/uci-defaults/04_mambafan deleted file mode 100644 index ec25aedad6..0000000000 --- a/target/linux/mvebu/base-files/etc/uci-defaults/04_mambafan +++ /dev/null @@ -1,23 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2017 LEDE-Project.org -# - -. /lib/functions.sh - -board=$(board_name) - -case "$board" in -linksys,mamba) - # Set fan script execution in crontab - grep -s -q fan_ctrl.sh /etc/crontabs/root && exit 0 - - echo "# mamba fan script runs every 5 minutes" >> /etc/crontabs/root - echo "*/5 * * * * /sbin/fan_ctrl.sh" >> /etc/crontabs/root - - # Execute one time after initial flash (instead of waiting 5 min for cron) - /sbin/fan_ctrl.sh - ;; -esac - -exit 0 |