diff options
Diffstat (limited to 'target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts')
-rw-r--r-- | target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts | 195 |
1 files changed, 1 insertions, 194 deletions
diff --git a/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts b/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts index a89455c613..d8dabfc370 100644 --- a/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts +++ b/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts @@ -1,180 +1,14 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "cn71xx.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "cn7130_ubnt_edgerouter-e300.dtsi" / { compatible = "ubnt,edgerouter-4", "cavium,cn7130"; model = "Ubiquiti EdgeRouter 4"; - - aliases { - /* White + Blinking Blue */ - led-boot = &led_power_white; - /* Blue + Blinking White */ - led-failsafe = &led_power_blue; - /* Constant Blue */ - led-running = &led_power_blue; - /* Blue + Blinking White */ - led-upgrade = &led_power_blue; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x00000000>, - <0x0 0x10000000>, - <0x0 0x20000000>, - <0x0 0x30000000>; - }; - - leds { - compatible = "gpio-leds"; - - led_power_blue: power_blue { - label = "blue:power"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - }; - - led_power_white: power_white { - label = "white:power"; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; - - sfp: sfp { - compatible = "sff,sfp"; - i2c-bus = <&twsi0>; - /* Pins 12, 13 and 14 gets pulled low when SFP is plugged in */ - mod-def0-gpio = <&gpio 12 GPIO_ACTIVE_LOW>; - }; -}; - -&uart0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&xhci0 { - status = "okay"; - dr_mode = "host"; -}; - -&twsi0 { - status = "okay"; - - sfp_eeprom@50 { - compatible = "at,24c04"; - reg = <0x50>; - }; - - sfp_eeprom@51 { - compatible = "at,24c04"; - reg = <0x51>; - }; -}; - -&spi { - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "Macronix,mx25l6405d", "spi-flash"; - reg = <0>; - spi-max-frequency = <25000000>; - - partition@0 { - label = "boot0"; - read-only; - reg = <0x000000 0x300000>; - }; - - partition@300000 { - label = "dummy"; - read-only; - reg = <0x300000 0x100000>; - }; - - eeprom: partition@400000 { - label = "eeprom"; - read-only; - reg = <0x400000 0x10000>; - }; - }; -}; - -&mmc { - status = "okay"; - - mmc-slot@0 { - compatible = "mmc-slot"; - reg = <0>; - non-removable; - max-frequency = <26000000>; - voltage-ranges = <3300 3300>; - bus-width = <8>; - }; -}; - -&smi0 { - status = "okay"; - - phy4: ethernet-phy@4 { - device_type = "ethernet-phy"; - interrupts = <17 8>; - interrupt-parent = <&gpio>; - compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22"; - reg = <4>; - sfp = <&sfp>; - }; - - phy5: ethernet-phy@5 { - device_type = "ethernet-phy"; - interrupts = <17 8>; - interrupt-parent = <&gpio>; - compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22"; - reg = <5>; - }; - - phy6: ethernet-phy@6 { - device_type = "ethernet-phy"; - interrupts = <17 8>; - interrupt-parent = <&gpio>; - compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22"; - reg = <6>; - }; - - phy7: ethernet-phy@7 { - device_type = "ethernet-phy"; - interrupts = <17 8>; - interrupt-parent = <&gpio>; - compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22"; - reg = <7>; - }; }; &pip { - status = "okay"; - interface@0 { - status = "okay"; - ethernet@0 { label = "lan3"; status = "okay"; @@ -182,32 +16,5 @@ phy-handle = <&phy4>; mtd-mac-address = <&eeprom 0>; }; - - ethernet@1 { - label = "lan0"; - status = "okay"; - phy-mode = "sgmii"; - phy-handle = <&phy5>; - mtd-mac-address = <&eeprom 0>; - mtd-mac-address-increment = <(1)>; - }; - - ethernet@2 { - label = "lan1"; - status = "okay"; - phy-mode = "sgmii"; - phy-handle = <&phy6>; - mtd-mac-address = <&eeprom 0>; - mtd-mac-address-increment = <(2)>; - }; - - ethernet@3 { - label = "lan2"; - status = "okay"; - phy-mode = "sgmii"; - phy-handle = <&phy7>; - mtd-mac-address = <&eeprom 0>; - mtd-mac-address-increment = <(3)>; - }; }; }; |