1 files changed, 147 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_ubnt_edgerouter-x.dtsi b/target/linux/ramips/dts/mt7621_ubnt_edgerouter-x.dtsi
new file mode 100644
index 0000000000..4503f67a64
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_ubnt_edgerouter-x.dtsi
@@ -0,0 +1,147 @@
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		label-mac-device = &gmac0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&gmac0 {
+	mtd-mac-address = <&factory 0x22>;
+	label = "dsa";
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "eth0";
+		};
+
+		port@1 {
+			status = "okay";
+			label = "eth1";
+			mtd-mac-address = <&factory 0x22>;
+			mtd-mac-address-increment = <1>;
+		};
+
+		port@2 {
+			status = "okay";
+			label = "eth2";
+			mtd-mac-address = <&factory 0x22>;
+			mtd-mac-address-increment = <2>;
+		};
+
+		port@3 {
+			status = "okay";
+			label = "eth3";
+			mtd-mac-address = <&factory 0x22>;
+			mtd-mac-address-increment = <3>;
+		};
+
+		port@4 {
+			status = "okay";
+			label = "eth4";
+			mtd-mac-address = <&factory 0x22>;
+			mtd-mac-address-increment = <4>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "u-boot-env";
+			reg = <0x80000 0x60000>;
+			read-only;
+		};
+
+		factory: partition@e0000 {
+			label = "factory";
+			reg = <0xe0000 0x60000>;
+		};
+
+		partition@140000 {
+			label = "kernel1";
+			reg = <0x140000 0x300000>;
+		};
+
+		partition@440000 {
+			label = "kernel2";
+			reg = <0x440000 0x300000>;
+		};
+
+		partition@740000 {
+			label = "ubi";
+			reg = <0x740000 0xf7c0000>;
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "uart2", "uart3", "pcie", "rgmii2", "jtag";
+		function = "gpio";
+	};
+};
+
+&spi0 {
+	/*
+	 * This board has 2Mb spi flash soldered in and visible
+	 * from manufacturer's firmware.
+	 * But this SoC shares spi and nand pins,
+	 * and current driver doesn't handle this sharing well
+	 */
+	status = "disabled";
+
+	m25p80@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "spi";
+				reg = <0x0 0x200000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&xhci {
+	status = "disabled";
+};