diff options
Diffstat (limited to 'target/linux/ramips')
| -rw-r--r-- | target/linux/ramips/dts/mt7621.dtsi | 9 | ||||
| -rw-r--r-- | target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c | 74 |
2 files changed, 14 insertions, 69 deletions
diff --git a/target/linux/ramips/dts/mt7621.dtsi b/target/linux/ramips/dts/mt7621.dtsi index daca857f60..87399a113e 100644 --- a/target/linux/ramips/dts/mt7621.dtsi +++ b/target/linux/ramips/dts/mt7621.dtsi @@ -440,10 +440,11 @@ 0x01000000 0 0x00000000 0x1e160000 0 0x00010000 /* io space */ >; - interrupt-parent = <&gic>; - interrupts = <GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH - GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH - GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xF0000 0 0 1>; + interrupt-map = <0x10000 0 0 1 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>, + <0x20000 0 0 1 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>, + <0x30000 0 0 1 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; diff --git a/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c b/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c index 4209e2330f..80f9cc2080 100644 --- a/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c +++ b/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c @@ -74,9 +74,6 @@ extern void chk_phy_pll(void); #define RALINK_PCI_CONFIG_ADDR 0x20 #define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24 -#define RALINK_INT_PCIE0 pcie_irq[0] -#define RALINK_INT_PCIE1 pcie_irq[1] -#define RALINK_INT_PCIE2 pcie_irq[2] #define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028) #define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C) #define RALINK_PCIE0_RST (1<<24) @@ -367,68 +364,12 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { u16 cmd; u32 val; - int irq = 0; - - if ((dev->bus->number == 0) && (slot == 0)) { - write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE); - read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val); - printk("BAR0 at slot 0 = %x\n", val); - printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); - } else if((dev->bus->number == 0) && (slot == 0x1)) { - write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE); - read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val); - printk("BAR0 at slot 1 = %x\n", val); - printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); - } else if((dev->bus->number == 0) && (slot == 0x2)) { - write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE); - read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val); - printk("BAR0 at slot 2 = %x\n", val); - printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); - } else if ((dev->bus->number == 1) && (slot == 0x0)) { - switch (pcie_link_status) { - case 2: - case 6: - irq = RALINK_INT_PCIE1; - break; - case 4: - irq = RALINK_INT_PCIE2; - break; - default: - irq = RALINK_INT_PCIE0; - } - printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); - } else if ((dev->bus->number == 2) && (slot == 0x0)) { - switch (pcie_link_status) { - case 5: - case 6: - irq = RALINK_INT_PCIE2; - break; - default: - irq = RALINK_INT_PCIE1; - } - printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); - } else if ((dev->bus->number == 2) && (slot == 0x1)) { - switch (pcie_link_status) { - case 5: - case 6: - irq = RALINK_INT_PCIE2; - break; - default: - irq = RALINK_INT_PCIE1; - } - printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); - } else if ((dev->bus->number ==3) && (slot == 0x0)) { - irq = RALINK_INT_PCIE2; - printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); - } else if ((dev->bus->number ==3) && (slot == 0x1)) { - irq = RALINK_INT_PCIE2; - printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); - } else if ((dev->bus->number ==3) && (slot == 0x2)) { - irq = RALINK_INT_PCIE2; - printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); - } else { - printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); - return 0; + int irq; + + if (dev->bus->number == 0) { + write_config(0, slot, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE); + read_config(0, slot, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val); + printk("BAR0 at slot %d = %x\n", slot, val); } pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14 @@ -436,6 +377,9 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) pci_read_config_word(dev, PCI_COMMAND, &cmd); cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; pci_write_config_word(dev, PCI_COMMAND, cmd); + + irq = of_irq_parse_and_map_pci(dev, slot, pin); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); return irq; } |