diff options
Diffstat (limited to 'target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts')
-rw-r--r-- | target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts | 213 |
1 files changed, 5 insertions, 208 deletions
diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts index b114cb6b5a..92d0e25fc4 100644 --- a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts +++ b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts @@ -1,60 +1,11 @@ // SPDX-License-Identifier: GPL-2.0-or-later -#include "rtl838x.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> +#include "rtl8380_zyxel_gs1900.dtsi" / { compatible = "zyxel,gs1900-10hp", "realtek,rtl838x-soc"; model = "ZyXEL GS1900-10HP Switch"; - aliases { - led-boot = &led_sys; - led-failsafe = &led_sys; - led-running = &led_sys; - led-upgrade = &led_sys; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - gpio1: rtl8231-gpio { - status = "okay"; - - poe_enable { - gpio-hog; - gpios = <13 0>; - output-high; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_sys: sys { - label = "gs1900:green:sys"; - gpios = <&gpio0 47 GPIO_ACTIVE_HIGH>; - }; - }; - /* i2c of the left SFP cage: port 9 */ i2c0: i2c-gpio-0 { compatible = "i2c-gpio"; @@ -92,161 +43,15 @@ mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; }; - -}; - -&spi0 { - status = "okay"; - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "u-boot-env"; - reg = <0x40000 0x10000>; - read-only; - }; - partition@50000 { - label = "u-boot-env2"; - reg = <0x50000 0x10000>; - read-only; - }; - partition@60000 { - label = "jffs"; - reg = <0x60000 0x100000>; - }; - partition@160000 { - label = "jffs2"; - reg = <0x160000 0x100000>; - }; - partition@b260000 { - label = "firmware"; - reg = <0x260000 0x6d0000>; - compatible = "denx,uimage"; - }; - partition@930000 { - label = "runtime2"; - reg = <0x930000 0x6d0000>; - }; - }; - }; }; -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - /* Internal phy */ - phy8: ethernet-phy@8 { - reg = <8>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy9: ethernet-phy@9 { - reg = <9>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy10: ethernet-phy@10 { - reg = <10>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <11>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy12: ethernet-phy@12 { - reg = <12>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <13>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy14: ethernet-phy@14 { - reg = <14>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy15: ethernet-phy@15 { - reg = <15>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy24: ethernet-phy@24 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <24>; - }; - phy26: ethernet-phy@26 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <26>; - }; - }; +&mdio { + INTERNAL_PHY(24) + INTERNAL_PHY(26) }; &switch0 { ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <8>; - label = "lan1"; - phy-handle = <&phy8>; - phy-mode = "internal"; - }; - port@1 { - reg = <9>; - label = "lan2"; - phy-handle = <&phy9>; - phy-mode = "internal"; - }; - port@2 { - reg = <10>; - label = "lan3"; - phy-handle = <&phy10>; - phy-mode = "internal"; - }; - port@3 { - reg = <11>; - label = "lan4"; - phy-handle = <&phy11>; - phy-mode = "internal"; - }; - port@4 { - reg = <12>; - label = "lan5"; - phy-handle = <&phy12>; - phy-mode = "internal"; - }; - port@5 { - reg = <13>; - label = "lan6"; - phy-handle = <&phy13>; - phy-mode = "internal"; - }; - port@6 { - reg = <14>; - label = "lan7"; - phy-handle = <&phy14>; - phy-mode = "internal"; - }; - port@7 { - reg = <15>; - label = "lan8"; - phy-handle = <&phy15>; - phy-mode = "internal"; - }; port@24 { reg = <24>; label = "lan9"; @@ -260,6 +65,7 @@ pause; }; }; + port@26 { reg = <26>; label = "lan10"; @@ -273,14 +79,5 @@ pause; }; }; - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; }; }; |