1 files changed, 2 insertions, 79 deletions
diff --git a/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts b/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts
index 3fb3cfb353..3843af1371 100644
--- a/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts
+++ b/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts
@@ -1,87 +1,10 @@
-#include "rtl838x.dtsi"
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "rtl8382_d-link_dgs-1210.dtsi"
 
 / {
 	compatible = "d-link,dgs-1210-16", "realtek,rtl838x-soc";
 	model = "D-Link DGS-1210-16";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: power {
-			label = "green:power";
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&gpio0 {
-	indirect-access-bus-id = <0>;
-};
-
-&spi0 {
-	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x00000000 0x80000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "u-boot-env";
-				reg = <0x00080000 0x40000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "u-boot-env2";
-				reg = <0x000c0000 0x40000>;
-				read-only;
-			};
-			partition@280000 {
-				label = "firmware";
-				compatible = "denx,uimage";
-				reg = <0x00100000 0xd80000>;
-			};
-			partition@be80000 {
-				label = "kernel2";
-				reg = <0x00e80000 0x180000>;
-			};
-			partition@1000000 {
-				label = "sysinfo";
-				reg = <0x01000000 0x40000>;
-			};
-			partition@1040000 {
-				label = "rootfs2";
-				reg = <0x01040000 0xc00000>;
-			};
-			partition@1c40000 {
-				label = "jffs2";
-				reg = <0x01c40000 0x3c0000>;
-			};
-		};
-	};
 };
 
 &ethernet0 {