aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/s3c24xx/patches-2.6.24/1179-fix-pcf50633-suspend-resume-onehit-i2c-other-meddlin.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/s3c24xx/patches-2.6.24/1179-fix-pcf50633-suspend-resume-onehit-i2c-other-meddlin.patch')
-rw-r--r--target/linux/s3c24xx/patches-2.6.24/1179-fix-pcf50633-suspend-resume-onehit-i2c-other-meddlin.patch204
1 files changed, 0 insertions, 204 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.24/1179-fix-pcf50633-suspend-resume-onehit-i2c-other-meddlin.patch b/target/linux/s3c24xx/patches-2.6.24/1179-fix-pcf50633-suspend-resume-onehit-i2c-other-meddlin.patch
deleted file mode 100644
index b9b718b0d3..0000000000
--- a/target/linux/s3c24xx/patches-2.6.24/1179-fix-pcf50633-suspend-resume-onehit-i2c-other-meddlin.patch
+++ /dev/null
@@ -1,204 +0,0 @@
-From 83636af17dab41d313411543c57984b5834cfcf2 Mon Sep 17 00:00:00 2001
-From: Andy Green <andy@openmoko.com>
-Date: Wed, 2 Jul 2008 22:39:10 +0100
-Subject: [PATCH] fix-pcf50633-suspend-resume-onehit-i2c-other-meddling.patch
-
- - speed up suspend and resume by using one hit i2c bulk transactions
- - don't bother storing int mask set on suspend, the default one is
- what we use anyway
- - put stack_trace() on pcf50633 low level access that fire if we
- try to touch them before we resumed
- - cosmetic source cleanup
- - reduces resume time for pcf50633 from 450ms to 255ms
-
-Signed-off-by: Andy Green <andy@openmoko.com>
----
- arch/arm/mach-s3c2440/mach-gta02.c | 21 ++-------
- drivers/i2c/chips/pcf50633.c | 83 +++++++++++++++++++----------------
- 2 files changed, 49 insertions(+), 55 deletions(-)
-
-diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
-index 9ba1036..22de181 100644
---- a/arch/arm/mach-s3c2440/mach-gta02.c
-+++ b/arch/arm/mach-s3c2440/mach-gta02.c
-@@ -477,24 +477,11 @@ static struct pcf50633_platform_data gta02_pcf_pdata = {
- .r_fix_batt_par = 10000,
- .r_sense_milli = 220,
- .resumers = {
-- [0] = /* PCF50633_INT1_ADPINS | */
-- /* PCF50633_INT1_ADPREM | */
-- PCF50633_INT1_USBINS |
-- PCF50633_INT1_USBREM |
-- PCF50633_INT1_ALARM,
-+ [0] = PCF50633_INT1_USBINS |
-+ PCF50633_INT1_USBREM |
-+ PCF50633_INT1_ALARM,
- [1] = PCF50633_INT2_ONKEYF,
-- [2] = /* PCF50633_INT3_BATFULL | */
-- /* PCF50633_INT3_CHGHALT | */
-- /* PCF50633_INT3_THLIMON | */
-- /* PCF50633_INT3_THLIMOFF | */
-- /* PCF50633_INT3_USBLIMON | */
-- /* PCF50633_INT3_USBLIMOFF | */
-- PCF50633_INT3_ONKEY1S ,
-- [3] = 0 /* |
-- PCF50633_INT4_LOWSYS | */
-- /* PCF50633_INT4_LOWBAT | */
-- /* PCF50633_INT4_HIGHTMP */,
-- [4] = 0
-+ [2] = PCF50633_INT3_ONKEY1S
- },
- .rails = {
- [PCF50633_REGULATOR_AUTO] = {
-diff --git a/drivers/i2c/chips/pcf50633.c b/drivers/i2c/chips/pcf50633.c
-index aabf412..8cb6156 100644
---- a/drivers/i2c/chips/pcf50633.c
-+++ b/drivers/i2c/chips/pcf50633.c
-@@ -163,10 +163,7 @@ struct pcf50633_data {
- u_int8_t down2out, down2ena;
- u_int8_t memldoout, memldoena;
- u_int8_t ledout, ledena, leddim;
-- struct {
-- u_int8_t out;
-- u_int8_t ena;
-- } ldo[__NUM_PCF50633_REGS];
-+ u_int8_t ldo[__NUM_PCF50633_REGS][2];
- } standby_regs;
-
- struct resume_dependency resume_dependency;
-@@ -187,6 +184,10 @@ static struct platform_device *pcf50633_pdev;
-
- static int __reg_write(struct pcf50633_data *pcf, u_int8_t reg, u_int8_t val)
- {
-+ if (pcf->have_been_suspended == 1) {
-+ dev_err(&pcf->client.dev, "__reg_write while suspended\n");
-+ dump_stack();
-+ }
- return i2c_smbus_write_byte_data(&pcf->client, reg, val);
- }
-
-@@ -205,6 +206,10 @@ static int32_t __reg_read(struct pcf50633_data *pcf, u_int8_t reg)
- {
- int32_t ret;
-
-+ if (pcf->have_been_suspended == 1) {
-+ dev_err(&pcf->client.dev, "__reg_read while suspended\n");
-+ dump_stack();
-+ }
- ret = i2c_smbus_read_byte_data(&pcf->client, reg);
-
- return ret;
-@@ -2165,6 +2170,13 @@ static int pcf50633_suspend(struct device *dev, pm_message_t state)
- struct i2c_client *client = to_i2c_client(dev);
- struct pcf50633_data *pcf = i2c_get_clientdata(client);
- int i;
-+ int ret;
-+ u_int8_t tmp;
-+
-+ /* we suspend once (!) as late as possible in the suspend sequencing */
-+
-+ if ((state.event != PM_EVENT_SUSPEND) || (pcf->have_been_suspended))
-+ return 0;
-
- /* The general idea is to power down all unused power supplies,
- * and then mask all PCF50606 interrup sources but EXTONR, ONKEYF
-@@ -2186,25 +2198,25 @@ static int pcf50633_suspend(struct device *dev, pm_message_t state)
- pcf->standby_regs.ledout = __reg_read(pcf, PCF50633_REG_LEDOUT);
- pcf->standby_regs.ledena = __reg_read(pcf, PCF50633_REG_LEDENA);
- pcf->standby_regs.leddim = __reg_read(pcf, PCF50633_REG_LEDDIM);
-- /* FIXME: one big read? */
-- for (i = 0; i < 7; i++) {
-- u_int8_t reg_out = PCF50633_REG_LDO1OUT + 2*i;
-- pcf->standby_regs.ldo[i].out = __reg_read(pcf, reg_out);
-- pcf->standby_regs.ldo[i].ena = __reg_read(pcf, reg_out+1);
-- }
-+
-+ /* regulator voltages and enable states */
-+ ret = i2c_smbus_read_i2c_block_data(&pcf->client,
-+ PCF50633_REG_LDO1OUT, 14,
-+ &pcf->standby_regs.ldo[0][0]);
-+ if (ret != 14)
-+ dev_err(dev, "Failed to save LDO levels and enables :-(\n");
-
- /* switch off power supplies that are not needed during suspend */
- for (i = 0; i < __NUM_PCF50633_REGULATORS; i++) {
-- if (!(pcf->pdata->rails[i].flags & PMU_VRAIL_F_SUSPEND_ON)) {
-- u_int8_t tmp;
--
-- DEBUGP("disabling pcf50633 regulator %u\n", i);
-- /* we cannot use pcf50633_onoff_set() because we're
-- * already under the mutex */
-- tmp = __reg_read(pcf, regulator_registers[i]+1);
-- tmp &= 0xfe;
-- __reg_write(pcf, regulator_registers[i]+1, tmp);
-- }
-+ if ((pcf->pdata->rails[i].flags & PMU_VRAIL_F_SUSPEND_ON))
-+ continue;
-+
-+ dev_dbg(dev, "disabling regulator %u\n", i);
-+ /* we cannot use pcf50633_onoff_set() because we're
-+ * already under the mutex */
-+ tmp = __reg_read(pcf, regulator_registers[i]+1);
-+ tmp &= 0xfe;
-+ __reg_write(pcf, regulator_registers[i]+1, tmp);
- }
-
- /* turn off the backlight */
-@@ -2212,11 +2224,9 @@ static int pcf50633_suspend(struct device *dev, pm_message_t state)
- __reg_write(pcf, PCF50633_REG_LEDOUT, 2);
- __reg_write(pcf, PCF50633_REG_LEDENA, 0x00);
-
-- pcf->standby_regs.int1m = __reg_read(pcf, PCF50633_REG_INT1M);
-- pcf->standby_regs.int2m = __reg_read(pcf, PCF50633_REG_INT2M);
-- pcf->standby_regs.int3m = __reg_read(pcf, PCF50633_REG_INT3M);
-- pcf->standby_regs.int4m = __reg_read(pcf, PCF50633_REG_INT4M);
-- pcf->standby_regs.int5m = __reg_read(pcf, PCF50633_REG_INT5M);
-+ /* set interrupt masks so only those sources we want to wake
-+ * us are able to
-+ */
- __reg_write(pcf, PCF50633_REG_INT1M, ~pcf->pdata->resumers[0]);
- __reg_write(pcf, PCF50633_REG_INT2M, ~pcf->pdata->resumers[1]);
- __reg_write(pcf, PCF50633_REG_INT3M, ~pcf->pdata->resumers[2]);
-@@ -2250,16 +2260,13 @@ static int pcf50633_resume(struct device *dev)
- {
- struct i2c_client *client = to_i2c_client(dev);
- struct pcf50633_data *pcf = i2c_get_clientdata(client);
-- int i;
-+ int ret;
-
- mutex_lock(&pcf->lock);
-
-- /* Resume all saved registers that don't "survive" standby state */
-- __reg_write(pcf, PCF50633_REG_INT1M, pcf->standby_regs.int1m);
-- __reg_write(pcf, PCF50633_REG_INT2M, pcf->standby_regs.int2m);
-- __reg_write(pcf, PCF50633_REG_INT3M, pcf->standby_regs.int3m);
-- __reg_write(pcf, PCF50633_REG_INT4M, pcf->standby_regs.int4m);
-- __reg_write(pcf, PCF50633_REG_INT5M, pcf->standby_regs.int5m);
-+ pcf->have_been_suspended = 2; /* resuming */
-+
-+ /* these guys get reset while pcf50633 is suspend state, refresh */
-
- __reg_write(pcf, PCF50633_REG_OOCTIM2, pcf->standby_regs.ooctim2);
- __reg_write(pcf, PCF50633_REG_AUTOOUT, pcf->standby_regs.autoout);
-@@ -2275,12 +2282,12 @@ static int pcf50633_resume(struct device *dev)
- if (!pcf->pdata->defer_resume_backlight)
- pcf50633_backlight_resume(pcf);
-
-- /* FIXME: one big read? */
-- for (i = 0; i < 7; i++) {
-- u_int8_t reg_out = PCF50633_REG_LDO1OUT + 2*i;
-- __reg_write(pcf, reg_out, pcf->standby_regs.ldo[i].out);
-- __reg_write(pcf, reg_out+1, pcf->standby_regs.ldo[i].ena);
-- }
-+ /* regulator voltages and enable states */
-+ ret = i2c_smbus_write_i2c_block_data(&pcf->client,
-+ PCF50633_REG_LDO1OUT, 14,
-+ &pcf->standby_regs.ldo[0][0]);
-+ if (ret)
-+ dev_err(dev, "Failed to restore LDOs :-( %d\n", ret);
-
- mutex_unlock(&pcf->lock);
-
---
-1.5.6.5
-