aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/s3c24xx/patches-2.6.24/1211-fix-lis302dl-resume-and-init-reload-boot-coefficient.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/s3c24xx/patches-2.6.24/1211-fix-lis302dl-resume-and-init-reload-boot-coefficient.patch')
-rw-r--r--target/linux/s3c24xx/patches-2.6.24/1211-fix-lis302dl-resume-and-init-reload-boot-coefficient.patch168
1 files changed, 0 insertions, 168 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.24/1211-fix-lis302dl-resume-and-init-reload-boot-coefficient.patch b/target/linux/s3c24xx/patches-2.6.24/1211-fix-lis302dl-resume-and-init-reload-boot-coefficient.patch
deleted file mode 100644
index bbc4190d52..0000000000
--- a/target/linux/s3c24xx/patches-2.6.24/1211-fix-lis302dl-resume-and-init-reload-boot-coefficient.patch
+++ /dev/null
@@ -1,168 +0,0 @@
-From b70bd0433a197f93f927f7b5720efe889aa4b430 Mon Sep 17 00:00:00 2001
-From: Andy Green <andy@openmoko.com>
-Date: Wed, 2 Jul 2008 22:43:45 +0100
-Subject: [PATCH] fix-lis302dl-resume-and-init-reload-boot-coefficients.patch
- Reported-by: John Lee <john_lee@openmoko.com>
-
-We don't reset the devices either at init or resume, where init
-means use the BOOT bit to reload device calibration coefficients
-from internal EEPROM. John Lee saw brain-damaged behaviour after
-resume and sometimes after boot (since it may not have lost power
-to force a BOOT itself that makes sense).
-
-This patch
-
- - adds a diagnostic dump feature down /sys
- - forces BOOT action on init and resume, and waits for
- completion
- - makes sure XYZ capture is enabled on resume
- - adds some constants in the .h and removes some magic numbers
- in the code by using them
-
-Signed-off-by: Andy Green <andy@openmoko.com>
----
- drivers/input/misc/lis302dl.c | 78 +++++++++++++++++++++++++++++++++++++++--
- include/linux/lis302dl.h | 9 +++++
- 2 files changed, 84 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/input/misc/lis302dl.c b/drivers/input/misc/lis302dl.c
-index 6067dba..de8478d 100644
---- a/drivers/input/misc/lis302dl.c
-+++ b/drivers/input/misc/lis302dl.c
-@@ -221,9 +221,37 @@ static ssize_t set_scale(struct device *dev, struct device_attribute *attr,
-
- static DEVICE_ATTR(full_scale, S_IRUGO | S_IWUSR, show_scale, set_scale);
-
-+static ssize_t lis302dl_dump(struct device *dev, struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct lis302dl_info *lis = dev_get_drvdata(dev);
-+ int n = 0;
-+ u8 reg[0x40];
-+ char *end = buf;
-+ unsigned long flags;
-+
-+ local_save_flags(flags);
-+
-+ for (n = 0; n < sizeof(reg); n++)
-+ reg[n] = reg_read(lis, n);
-+
-+ local_irq_restore(flags);
-+
-+ for (n = 0; n < sizeof(reg); n += 16) {
-+ hex_dump_to_buffer(reg + n, 16, 16, 1, end, 128, 0);
-+ end += strlen(end);
-+ *end++ = '\n';
-+ *end++ = '\0';
-+ }
-+
-+ return end - buf;
-+}
-+static DEVICE_ATTR(dump, S_IRUGO, lis302dl_dump, NULL);
-+
- static struct attribute *lis302dl_sysfs_entries[] = {
- &dev_attr_sample_rate.attr,
- &dev_attr_full_scale.attr,
-+ &dev_attr_dump.attr,
- NULL
- };
-
-@@ -276,6 +304,24 @@ static void lis302dl_input_close(struct input_dev *inp)
- local_irq_restore(flags);
- }
-
-+/* get the device to reload its coefficients from EEPROM and wait for it
-+ * to complete
-+ */
-+
-+static int __lis302dl_reset_device(struct lis302dl_info *lis)
-+{
-+ int timeout = 10;
-+
-+ reg_write(lis, LIS302DL_REG_CTRL2, LIS302DL_CTRL2_BOOT |
-+ LIS302DL_CTRL2_FDS);
-+
-+ while ((reg_read(lis, LIS302DL_REG_CTRL2) & LIS302DL_CTRL2_BOOT) &&
-+ (timeout--))
-+ mdelay(1);
-+
-+ return !!(timeout < 0);
-+}
-+
- static int __devinit lis302dl_probe(struct spi_device *spi)
- {
- int rc;
-@@ -347,12 +393,24 @@ static int __devinit lis302dl_probe(struct spi_device *spi)
- goto bail_inp_dev;
- }
-
-- reg_write(lis, LIS302DL_REG_CTRL1, 0x47);
-- reg_write(lis, LIS302DL_REG_CTRL3, 0xc0);
-+ if (__lis302dl_reset_device(lis))
-+ dev_err(&spi->dev, "device BOOT reload failed\n");
-+
-+ /* force us powered */
-+ reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD |
-+ LIS302DL_CTRL1_Xen |
-+ LIS302DL_CTRL1_Yen |
-+ LIS302DL_CTRL1_Zen);
-+ mdelay(1);
-+
-+ reg_write(lis, LIS302DL_REG_CTRL2, 0);
-+ reg_write(lis, LIS302DL_REG_CTRL3, LIS302DL_CTRL3_PP_OD |
-+ LIS302DL_CTRL3_IHL);
- reg_write(lis, LIS302DL_REG_FF_WU_THS_1, 0x14);
- reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1, 0x00);
- reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, 0x95);
-
-+ /* start off in powered down mode; we power up when someone opens us */
- reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_Xen |
- LIS302DL_CTRL1_Yen |
- LIS302DL_CTRL1_Zen);
-@@ -494,8 +552,22 @@ static int lis302dl_resume(struct spi_device *spi)
- /* get our IO to the device back in operational states */
- (lis->pdata->lis302dl_suspend_io)(lis, 1);
-
-+ /* resume from powerdown first! */
-+ reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD |
-+ LIS302DL_CTRL1_Xen |
-+ LIS302DL_CTRL1_Yen |
-+ LIS302DL_CTRL1_Zen);
-+ mdelay(1);
-+
-+ if (__lis302dl_reset_device(lis))
-+ dev_err(&spi->dev, "device BOOT reload failed\n");
-+
- /* restore registers after resume */
-- reg_write(lis, LIS302DL_REG_CTRL1, lis->regs[LIS302DL_REG_CTRL1]);
-+ reg_write(lis, LIS302DL_REG_CTRL1, lis->regs[LIS302DL_REG_CTRL1] |
-+ LIS302DL_CTRL1_PD |
-+ LIS302DL_CTRL1_Xen |
-+ LIS302DL_CTRL1_Yen |
-+ LIS302DL_CTRL1_Zen);
- reg_write(lis, LIS302DL_REG_CTRL2, lis->regs[LIS302DL_REG_CTRL2]);
- reg_write(lis, LIS302DL_REG_CTRL3, lis->regs[LIS302DL_REG_CTRL3]);
- reg_write(lis, LIS302DL_REG_FF_WU_CFG_1,
-diff --git a/include/linux/lis302dl.h b/include/linux/lis302dl.h
-index 0d6b4c4..4d8ded9 100644
---- a/include/linux/lis302dl.h
-+++ b/include/linux/lis302dl.h
-@@ -66,6 +66,15 @@ enum lis302dl_reg_ctrl1 {
- LIS302DL_CTRL1_DR = 0x80,
- };
-
-+enum lis302dl_reg_ctrl2 {
-+ LIS302DL_CTRL2_HPC1 = 0x01,
-+ LIS302DL_CTRL2_HPC2 = 0x02,
-+ LIS302DL_CTRL2_HPFF1 = 0x04,
-+ LIS302DL_CTRL2_HPFF2 = 0x08,
-+ LIS302DL_CTRL2_FDS = 0x10,
-+ LIS302DL_CTRL2_BOOT = 0x40,
-+ LIS302DL_CTRL2_SIM = 0x80,
-+};
- enum lis302dl_reg_ctrl3 {
- LIS302DL_CTRL3_PP_OD = 0x40,
- LIS302DL_CTRL3_IHL = 0x80,
---
-1.5.6.5
-