aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/s3c24xx/patches-2.6.24/1247-fix-glamo-mci-ensure-more-than-74-clocks-after-power.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/s3c24xx/patches-2.6.24/1247-fix-glamo-mci-ensure-more-than-74-clocks-after-power.patch')
-rw-r--r--target/linux/s3c24xx/patches-2.6.24/1247-fix-glamo-mci-ensure-more-than-74-clocks-after-power.patch52
1 files changed, 52 insertions, 0 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.24/1247-fix-glamo-mci-ensure-more-than-74-clocks-after-power.patch b/target/linux/s3c24xx/patches-2.6.24/1247-fix-glamo-mci-ensure-more-than-74-clocks-after-power.patch
new file mode 100644
index 0000000000..defef570ba
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.24/1247-fix-glamo-mci-ensure-more-than-74-clocks-after-power.patch
@@ -0,0 +1,52 @@
+From 8533927964761f4e2078ccd8607b90f5acc60b93 Mon Sep 17 00:00:00 2001
+From: Andy Green <andy@openmoko.com>
+Date: Thu, 24 Jul 2008 00:04:54 +0100
+Subject: [PATCH] fix-glamo-mci-ensure-more-than-74-clocks-after-power.patch
+
+We are meant to run SD_CLK a little while after power-on for the SD
+Card, but with the no idle clock changes we didn't take care about it.
+
+This makes us sleep a little bit before disabling clock if we just
+powered up the SD Card.
+
+Signed-off-by: Andy Green <andy@openmoko.com>
+---
+ drivers/mfd/glamo/glamo-mci.c | 8 ++++++++
+ 1 files changed, 8 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/mfd/glamo/glamo-mci.c b/drivers/mfd/glamo/glamo-mci.c
+index 264a6bc..c2351e2 100644
+--- a/drivers/mfd/glamo/glamo-mci.c
++++ b/drivers/mfd/glamo/glamo-mci.c
+@@ -684,6 +684,7 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+ struct glamo_mci_host *host = mmc_priv(mmc);
+ int n = 0;
+ int div;
++ int powering = 0;
+
+ /* Set power */
+ switch(ios->power_mode) {
+@@ -699,6 +700,7 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+ glamo_engine_enable(glamo_mci_def_pdata.pglamo,
+ GLAMO_ENGINE_MMC);
+ glamo_mci_reset(host);
++ powering = 1;
+ break;
+
+ case MMC_POWER_OFF:
+@@ -716,6 +718,12 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+ host->real_rate = __glamo_mci_set_card_clock(host, ios->clock, &div);
+ host->clk_div = div;
+
++ /* after power-up, we are meant to give it >= 74 clocks so it can
++ * initialize itself. Doubt any modern cards need it but anyway...
++ */
++ if (powering)
++ msleep(1);
++
+ if (!sd_idleclk)
+ /* stop the clock to card, because we are idle until transfer */
+ __glamo_mci_fix_card_div(host, -1);
+--
+1.5.6.5
+