aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/s3c24xx/patches-2.6.24/1303-fix-lid302dl-bitbang-all-the-way-baby.patch.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/s3c24xx/patches-2.6.24/1303-fix-lid302dl-bitbang-all-the-way-baby.patch.patch')
-rw-r--r--target/linux/s3c24xx/patches-2.6.24/1303-fix-lid302dl-bitbang-all-the-way-baby.patch.patch1184
1 files changed, 0 insertions, 1184 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.24/1303-fix-lid302dl-bitbang-all-the-way-baby.patch.patch b/target/linux/s3c24xx/patches-2.6.24/1303-fix-lid302dl-bitbang-all-the-way-baby.patch.patch
deleted file mode 100644
index 852faaeb42..0000000000
--- a/target/linux/s3c24xx/patches-2.6.24/1303-fix-lid302dl-bitbang-all-the-way-baby.patch.patch
+++ /dev/null
@@ -1,1184 +0,0 @@
-From 1c6f5a92c816db43128444606c26507ebe6e5a43 Mon Sep 17 00:00:00 2001
-From: Andy Green <andy@openmoko.com>
-Date: Mon, 13 Oct 2008 12:01:05 +0100
-Subject: [PATCH] fix-lid302dl-bitbang-all-the-way-baby.patch
-
-This large patch removes motion sensor from Linux SPI bitbang driver.
-Previously, some access was done through Linux SPI protected
-by a mutex, and the ISR access was done by platform bitbang code due
-to inability of Linux SPI driver to work in the interrupt context.
-
-Now all access is done by bitbang callbacks in mach_gta02.c and are
-protected by single scheme of interrupt lockout for the duration --
-I line-by-line'd the driver to confirm that best I could, adding
-protection and taking more care on several /sys related paths.
-
-Because this is no longer a Linux SPI bus driver, the path for various
-/sys things have changed. They can now be found down, eg,
-
-/sys/devices/platform/lis302dl.1/sample_rate
-
-lis302dl.1 is the top sensor and .2 the bottom. The names of the input
-susbsytem paths remain the same as before.
-
-Signed-off-by: Andy Green <andy@openmoko.com>
----
- arch/arm/mach-s3c2440/mach-gta02.c | 233 +++++++++----------
- drivers/input/misc/lis302dl.c | 437 ++++++++++++++++--------------------
- include/linux/lis302dl.h | 9 +-
- 3 files changed, 315 insertions(+), 364 deletions(-)
-
-diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
-index 467c417..b19632c 100644
---- a/arch/arm/mach-s3c2440/mach-gta02.c
-+++ b/arch/arm/mach-s3c2440/mach-gta02.c
-@@ -1052,20 +1052,21 @@ static struct platform_device gta02_vibrator_dev = {
- /* #define DEBUG_SPEW_MS */
- #define MG_PER_SAMPLE 18
-
--struct lis302dl_platform_data lis302_pdata[];
-+struct lis302dl_platform_data lis302_pdata_top;
-+struct lis302dl_platform_data lis302_pdata_bottom;
-
--void gta02_lis302dl_bitbang_read(struct lis302dl_info *lis)
-+/*
-+ * generic SPI RX and TX bitbang
-+ * only call with interrupts off!
-+ */
-+
-+static void __gta02_lis302dl_bitbang(struct lis302dl_info *lis, u8 *tx,
-+ int tx_bytes, u8 *rx, int rx_bytes)
- {
- struct lis302dl_platform_data *pdata = lis->pdata;
-- u8 shifter = 0xc0 | LIS302DL_REG_OUT_X; /* read, autoincrement */
-- int n, n1;
-+ int n;
-+ u8 shifter = 0;
- unsigned long other_cs;
-- unsigned long flags;
--#ifdef DEBUG_SPEW_MS
-- s8 x, y, z;
--#endif
--
-- local_irq_save(flags);
-
- /*
- * Huh.. "quirk"... CS on this device is not really "CS" like you can
-@@ -1073,20 +1074,25 @@ void gta02_lis302dl_bitbang_read(struct lis302dl_info *lis)
- * have 2 devices on one interface, the "disabled" device when we talk
- * to an "enabled" device sees the clocks as I2C clocks, creating
- * havoc.
-+ *
- * I2C sees MOSI going LOW while CLK HIGH as a START action, we must
- * ensure this is never issued.
- */
-
-- if (&lis302_pdata[0] == pdata)
-- other_cs = lis302_pdata[1].pin_chip_select;
-+ if (&lis302_pdata_top == pdata)
-+ other_cs = lis302_pdata_bottom.pin_chip_select;
- else
-- other_cs = lis302_pdata[0].pin_chip_select;
-+ other_cs = lis302_pdata_top.pin_chip_select;
-
- s3c2410_gpio_setpin(other_cs, 1);
- s3c2410_gpio_setpin(pdata->pin_chip_select, 1);
- s3c2410_gpio_setpin(pdata->pin_clk, 1);
- s3c2410_gpio_setpin(pdata->pin_chip_select, 0);
-- for (n = 0; n < 8; n++) { /* write the r/w, inc and address */
-+
-+ /* send the register index, r/w and autoinc bits */
-+ for (n = 0; n < (tx_bytes << 3); n++) {
-+ if (!(n & 7))
-+ shifter = tx[n >> 3];
- s3c2410_gpio_setpin(pdata->pin_clk, 0);
- s3c2410_gpio_setpin(pdata->pin_mosi, (shifter >> 7) & 1);
- s3c2410_gpio_setpin(pdata->pin_clk, 0);
-@@ -1095,44 +1101,71 @@ void gta02_lis302dl_bitbang_read(struct lis302dl_info *lis)
- shifter <<= 1;
- }
-
-- for (n = 0; n < 5; n++) { /* 5 consequetive registers */
-- for (n1 = 0; n1 < 8; n1++) { /* 8 bits each */
-- s3c2410_gpio_setpin(pdata->pin_clk, 0);
-- s3c2410_gpio_setpin(pdata->pin_clk, 0);
-- shifter <<= 1;
-- if (s3c2410_gpio_getpin(pdata->pin_miso))
-- shifter |= 1;
-- s3c2410_gpio_setpin(pdata->pin_clk, 1);
-- s3c2410_gpio_setpin(pdata->pin_clk, 1);
-- }
-- switch (n) {
-- case 0:
--#ifdef DEBUG_SPEW_MS
-- x = shifter;
--#endif
-- input_report_rel(lis->input_dev, REL_X, MG_PER_SAMPLE * (s8)shifter);
-- break;
-- case 2:
--#ifdef DEBUG_SPEW_MS
-- y = shifter;
--#endif
-- input_report_rel(lis->input_dev, REL_Y, MG_PER_SAMPLE * (s8)shifter);
-- break;
-- case 4:
--#ifdef DEBUG_SPEW_MS
-- z = shifter;
--#endif
-- input_report_rel(lis->input_dev, REL_Z, MG_PER_SAMPLE * (s8)shifter);
-- break;
-- }
-+ for (n = 0; n < (rx_bytes << 3); n++) { /* 8 bits each */
-+ s3c2410_gpio_setpin(pdata->pin_clk, 0);
-+ s3c2410_gpio_setpin(pdata->pin_clk, 0);
-+ shifter <<= 1;
-+ if (s3c2410_gpio_getpin(pdata->pin_miso))
-+ shifter |= 1;
-+ if ((n & 7) == 7)
-+ rx[n >> 3] = shifter;
-+ s3c2410_gpio_setpin(pdata->pin_clk, 1);
-+ s3c2410_gpio_setpin(pdata->pin_clk, 1);
- }
- s3c2410_gpio_setpin(pdata->pin_chip_select, 1);
- s3c2410_gpio_setpin(other_cs, 1);
-+}
-+
-+
-+static int gta02_lis302dl_bitbang_read_reg(struct lis302dl_info *lis, u8 reg)
-+{
-+ u8 data = 0xc0 | reg; /* read, autoincrement */
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ __gta02_lis302dl_bitbang(lis, &data, 1, &data, 1);
-+
-+ local_irq_restore(flags);
-+
-+ return data;
-+}
-+
-+static void gta02_lis302dl_bitbang_write_reg(struct lis302dl_info *lis, u8 reg,
-+ u8 val)
-+{
-+ u8 data[2] = { 0x00 | reg, val }; /* write, no autoincrement */
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ __gta02_lis302dl_bitbang(lis, &data[0], 2, NULL, 0);
-+
- local_irq_restore(flags);
-
-+}
-+
-+
-+static void gta02_lis302dl_bitbang_sample(struct lis302dl_info *lis)
-+{
-+ u8 data = 0xc0 | LIS302DL_REG_OUT_X; /* read, autoincrement */
-+ u8 read[5];
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ __gta02_lis302dl_bitbang(lis, &data, 1, &read[0], 5);
-+
-+ local_irq_restore(flags);
-+
-+ input_report_rel(lis->input_dev, REL_X, MG_PER_SAMPLE * (s8)read[0]);
-+ input_report_rel(lis->input_dev, REL_Y, MG_PER_SAMPLE * (s8)read[2]);
-+ input_report_rel(lis->input_dev, REL_Z, MG_PER_SAMPLE * (s8)read[4]);
-+
- input_sync(lis->input_dev);
- #ifdef DEBUG_SPEW_MS
-- printk("%s: %d %d %d\n", pdata->name, x, y, z);
-+ printk(KERN_INFO "%s: %d %d %d\n", pdata->name, read[0], read[2],
-+ read[4]);
- #endif
- }
-
-@@ -1159,103 +1192,58 @@ void gta02_lis302dl_suspend_io(struct lis302dl_info *lis, int resume)
- s3c2410_gpio_setpin(pdata->pin_clk, 1);
- /* misnomer: it is a pullDOWN in 2442 */
- s3c2410_gpio_pullup(pdata->pin_miso, 0);
-+
-+ s3c2410_gpio_cfgpin(pdata->pin_chip_select, S3C2410_GPIO_OUTPUT);
-+ s3c2410_gpio_cfgpin(pdata->pin_clk, S3C2410_GPIO_OUTPUT);
-+ s3c2410_gpio_cfgpin(pdata->pin_mosi, S3C2410_GPIO_OUTPUT);
-+ s3c2410_gpio_cfgpin(pdata->pin_miso, S3C2410_GPIO_INPUT);
-+
- }
-
--struct lis302dl_platform_data lis302_pdata[] = {
-- {
-+
-+
-+struct lis302dl_platform_data lis302_pdata_top = {
- .name = "lis302-1 (top)",
- .pin_chip_select= S3C2410_GPD12,
- .pin_clk = S3C2410_GPG7,
- .pin_mosi = S3C2410_GPG6,
- .pin_miso = S3C2410_GPG5,
-+ .interrupt = GTA02_IRQ_GSENSOR_1,
- .open_drain = 1, /* altered at runtime by PCB rev */
-- .lis302dl_bitbang_read = gta02_lis302dl_bitbang_read,
-+ .lis302dl_bitbang_read_sample = gta02_lis302dl_bitbang_sample,
-+ .lis302dl_bitbang_reg_read = gta02_lis302dl_bitbang_read_reg,
-+ .lis302dl_bitbang_reg_write = gta02_lis302dl_bitbang_write_reg,
- .lis302dl_suspend_io = gta02_lis302dl_suspend_io,
-- }, {
-+};
-+
-+struct lis302dl_platform_data lis302_pdata_bottom = {
- .name = "lis302-2 (bottom)",
- .pin_chip_select= S3C2410_GPD13,
- .pin_clk = S3C2410_GPG7,
- .pin_mosi = S3C2410_GPG6,
- .pin_miso = S3C2410_GPG5,
-+ .interrupt = GTA02_IRQ_GSENSOR_2,
- .open_drain = 1, /* altered at runtime by PCB rev */
-- .lis302dl_bitbang_read = gta02_lis302dl_bitbang_read,
-+ .lis302dl_bitbang_read_sample = gta02_lis302dl_bitbang_sample,
-+ .lis302dl_bitbang_reg_read = gta02_lis302dl_bitbang_read_reg,
-+ .lis302dl_bitbang_reg_write = gta02_lis302dl_bitbang_write_reg,
- .lis302dl_suspend_io = gta02_lis302dl_suspend_io,
-- },
- };
-
--static struct spi_board_info gta02_spi_acc_bdinfo[] = {
-- {
-- .modalias = "lis302dl",
-- .platform_data = &lis302_pdata[0],
-- .irq = GTA02_IRQ_GSENSOR_1,
-- .max_speed_hz = 10 * 1000 * 1000,
-- .bus_num = 1,
-- .chip_select = 0,
-- .mode = SPI_MODE_3,
-- },
-- {
-- .modalias = "lis302dl",
-- .platform_data = &lis302_pdata[1],
-- .irq = GTA02_IRQ_GSENSOR_2,
-- .max_speed_hz = 10 * 1000 * 1000,
-- .bus_num = 1,
-- .chip_select = 1,
-- .mode = SPI_MODE_3,
-- },
--};
--
--static void spi_acc_cs(struct s3c2410_spigpio_info *spigpio_info,
-- int csid, int cs)
--{
-- struct lis302dl_platform_data * plat_data =
-- (struct lis302dl_platform_data *)spigpio_info->
-- board_info->platform_data;
-- switch (cs) {
-- case BITBANG_CS_ACTIVE:
-- s3c2410_gpio_setpin(plat_data[csid].pin_chip_select, 0);
-- break;
-- case BITBANG_CS_INACTIVE:
-- s3c2410_gpio_setpin(plat_data[csid].pin_chip_select, 1);
-- break;
-- }
--}
-
--static struct s3c2410_spigpio_info spi_gpio_cfg = {
-- .pin_clk = S3C2410_GPG7,
-- .pin_mosi = S3C2410_GPG6,
-- .pin_miso = S3C2410_GPG5,
-- .board_size = ARRAY_SIZE(gta02_spi_acc_bdinfo),
-- .board_info = gta02_spi_acc_bdinfo,
-- .chip_select = &spi_acc_cs,
-- .num_chipselect = 2,
--};
--
--static struct resource s3c_spi_acc_resource[] = {
-- [0] = {
-- .start = S3C2410_GPG3,
-- .end = S3C2410_GPG3,
-- },
-- [1] = {
-- .start = S3C2410_GPG5,
-- .end = S3C2410_GPG5,
-- },
-- [2] = {
-- .start = S3C2410_GPG6,
-- .end = S3C2410_GPG6,
-- },
-- [3] = {
-- .start = S3C2410_GPG7,
-- .end = S3C2410_GPG7,
-+static struct platform_device s3c_device_spi_acc1 = {
-+ .name = "lis302dl",
-+ .id = 1,
-+ .dev = {
-+ .platform_data = &lis302_pdata_top,
- },
- };
-
--static struct platform_device s3c_device_spi_acc = {
-- .name = "spi_s3c24xx_gpio",
-- .id = 1,
-- .num_resources = ARRAY_SIZE(s3c_spi_acc_resource),
-- .resource = s3c_spi_acc_resource,
-+static struct platform_device s3c_device_spi_acc2 = {
-+ .name = "lis302dl",
-+ .id = 2,
- .dev = {
-- .platform_data = &spi_gpio_cfg,
-+ .platform_data = &lis302_pdata_bottom,
- },
- };
-
-@@ -1573,8 +1561,8 @@ static void __init gta02_machine_init(void)
- switch (system_rev) {
- case GTA02v6_SYSTEM_REV:
- /* we need push-pull interrupt from motion sensors */
-- lis302_pdata[0].open_drain = 0;
-- lis302_pdata[1].open_drain = 0;
-+ lis302_pdata_top.open_drain = 0;
-+ lis302_pdata_bottom.open_drain = 0;
- break;
- default:
- break;
-@@ -1635,7 +1623,8 @@ static void __init gta02_machine_init(void)
- mangle_glamo_res_by_system_rev();
- platform_device_register(&gta02_glamo_dev);
-
-- platform_device_register(&s3c_device_spi_acc);
-+ platform_device_register(&s3c_device_spi_acc1);
-+ platform_device_register(&s3c_device_spi_acc2);
- platform_device_register(&gta02_button_dev);
- platform_device_register(&gta02_pm_gsm_dev);
- platform_device_register(&gta02_pm_usbhost_dev);
-diff --git a/drivers/input/misc/lis302dl.c b/drivers/input/misc/lis302dl.c
-index b01ca04..1d5781d 100644
---- a/drivers/input/misc/lis302dl.c
-+++ b/drivers/input/misc/lis302dl.c
-@@ -1,7 +1,9 @@
- /* Linux kernel driver for the ST LIS302D 3-axis accelerometer
- *
-- * Copyright (C) 2007 by Openmoko, Inc.
-+ * Copyright (C) 2007-2008 by Openmoko, Inc.
- * Author: Harald Welte <laforge@openmoko.org>
-+ * converted to private bitbang by:
-+ * Andy Green <andy@openmoko.com>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
-@@ -39,78 +41,19 @@
-
- #include <linux/lis302dl.h>
-
--/* lowlevel register access functions */
-
--#define READ_BIT 0x80
--#define READ_BIT_INC_ADS 0xc0
--#define ADDR_MASK 0x3f
-
--static u_int8_t __reg_read(struct lis302dl_info *lis, u_int8_t reg)
-+static void __reg_set_bit_mask(struct lis302dl_info *lis, u8 reg, u8 mask,
-+ u8 val)
- {
-- int rc;
-- u_int8_t cmd;
--
-- BUG_ON(reg & ~ADDR_MASK);
--
-- cmd = reg | READ_BIT;
--
-- rc = spi_w8r8(lis->spi_dev, cmd);
--
-- return rc;
--}
--
--static u_int8_t reg_read(struct lis302dl_info *lis, u_int8_t reg)
--{
-- u_int8_t ret;
--
-- mutex_lock(&lis->lock);
-- ret = __reg_read(lis, reg);
-- mutex_unlock(&lis->lock);
--
-- return ret;
--}
--
--static int __reg_write(struct lis302dl_info *lis, u_int8_t reg, u_int8_t val)
--{
-- u_int8_t buf[2];
--
-- BUG_ON(reg & ~ADDR_MASK);
--
-- buf[0] = reg;
-- buf[1] = val;
--
-- return spi_write(lis->spi_dev, buf, sizeof(buf));
--}
--
--static int reg_write(struct lis302dl_info *lis, u_int8_t reg, u_int8_t val)
--{
-- int ret;
--
-- mutex_lock(&lis->lock);
-- ret = __reg_write(lis, reg, val);
-- mutex_unlock(&lis->lock);
--
-- return ret;
--}
--
--static int reg_set_bit_mask(struct lis302dl_info *lis,
-- u_int8_t reg, u_int8_t mask, u_int8_t val)
--{
-- int ret;
- u_int8_t tmp;
-
- val &= mask;
-
-- mutex_lock(&lis->lock);
--
-- tmp = __reg_read(lis, reg);
-+ tmp = (lis->pdata->lis302dl_bitbang_reg_read)(lis, reg);
- tmp &= ~mask;
- tmp |= val;
-- ret = __reg_write(lis, reg, tmp);
--
-- mutex_unlock(&lis->lock);
--
-- return ret;
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, reg, tmp);
- }
-
- /* interrupt handling related */
-@@ -124,17 +67,17 @@ enum lis302dl_intmode {
- LIS302DL_INTMODE_CLICK = 0x07,
- };
-
--static void lis302dl_int_mode(struct spi_device *spi, int int_pin,
-+static void __lis302dl_int_mode(struct device *dev, int int_pin,
- enum lis302dl_intmode mode)
- {
-- struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
-+ struct lis302dl_info *lis = dev_get_drvdata(dev);
-
- switch (int_pin) {
- case 1:
-- reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x07, mode);
-+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x07, mode);
- break;
- case 2:
-- reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x38, mode << 3);
-+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x38, mode << 3);
- break;
- default:
- BUG();
-@@ -165,7 +108,7 @@ static irqreturn_t lis302dl_interrupt(int irq, void *_lis)
- {
- struct lis302dl_info *lis = _lis;
-
-- (lis->pdata->lis302dl_bitbang_read)(lis);
-+ (lis->pdata->lis302dl_bitbang_read_sample)(lis);
- return IRQ_HANDLED;
- }
-
-@@ -175,7 +118,13 @@ static ssize_t show_rate(struct device *dev, struct device_attribute *attr,
- char *buf)
- {
- struct lis302dl_info *lis = dev_get_drvdata(dev);
-- u_int8_t ctrl1 = reg_read(lis, LIS302DL_REG_CTRL1);
-+ u8 ctrl1;
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+ ctrl1 = (lis->pdata->lis302dl_bitbang_reg_read)
-+ (lis, LIS302DL_REG_CTRL1);
-+ local_irq_restore(flags);
-
- return sprintf(buf, "%d\n", ctrl1 & LIS302DL_CTRL1_DR ? 400 : 100);
- }
-@@ -184,12 +133,17 @@ static ssize_t set_rate(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
- {
- struct lis302dl_info *lis = dev_get_drvdata(dev);
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-
- if (!strcmp(buf, "400\n"))
-- reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR,
-+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR,
- LIS302DL_CTRL1_DR);
- else
-- reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR, 0);
-+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR,
-+ 0);
-+ local_irq_restore(flags);
-
- return count;
- }
-@@ -200,7 +154,13 @@ static ssize_t show_scale(struct device *dev, struct device_attribute *attr,
- char *buf)
- {
- struct lis302dl_info *lis = dev_get_drvdata(dev);
-- u_int8_t ctrl1 = reg_read(lis, LIS302DL_REG_CTRL1);
-+ u_int8_t ctrl1;
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+ ctrl1 = (lis->pdata->lis302dl_bitbang_reg_read)(lis,
-+ LIS302DL_REG_CTRL1);
-+ local_irq_restore(flags);
-
- return sprintf(buf, "%s\n", ctrl1 & LIS302DL_CTRL1_FS ? "9.2" : "2.3");
- }
-@@ -209,12 +169,18 @@ static ssize_t set_scale(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
- {
- struct lis302dl_info *lis = dev_get_drvdata(dev);
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-
- if (!strcmp(buf, "9.2\n"))
-- reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS,
-+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS,
- LIS302DL_CTRL1_FS);
- else
-- reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS, 0);
-+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS,
-+ 0);
-+
-+ local_irq_restore(flags);
-
- return count;
- }
-@@ -222,7 +188,7 @@ static ssize_t set_scale(struct device *dev, struct device_attribute *attr,
- static DEVICE_ATTR(full_scale, S_IRUGO | S_IWUSR, show_scale, set_scale);
-
- static ssize_t lis302dl_dump(struct device *dev, struct device_attribute *attr,
-- char *buf)
-+ char *buf)
- {
- struct lis302dl_info *lis = dev_get_drvdata(dev);
- int n = 0;
-@@ -233,7 +199,7 @@ static ssize_t lis302dl_dump(struct device *dev, struct device_attribute *attr,
- local_irq_save(flags);
-
- for (n = 0; n < sizeof(reg); n++)
-- reg[n] = reg_read(lis, n);
-+ reg[n] = (lis->pdata->lis302dl_bitbang_reg_read)(lis, n);
-
- local_irq_restore(flags);
-
-@@ -248,9 +214,9 @@ static ssize_t lis302dl_dump(struct device *dev, struct device_attribute *attr,
- }
- static DEVICE_ATTR(dump, S_IRUGO, lis302dl_dump, NULL);
-
--static int freefall_ms_to_duration(struct lis302dl_info *lis, int ms)
-+static int __freefall_ms_to_duration(struct lis302dl_info *lis, int ms)
- {
-- u_int8_t r = reg_read(lis, LIS302DL_REG_CTRL1);
-+ u8 r = (lis->pdata->lis302dl_bitbang_reg_read)(lis, LIS302DL_REG_CTRL1);
-
- /* If we have 400 ms sampling rate, the stepping is 2.5 ms,
- * on 100 ms the stepping is 10ms */
-@@ -268,9 +234,9 @@ static int freefall_ms_to_duration(struct lis302dl_info *lis, int ms)
- return ms / 10;
- }
-
--static int freefall_duration_to_ms(struct lis302dl_info *lis, int duration)
-+static int __freefall_duration_to_ms(struct lis302dl_info *lis, int duration)
- {
-- u_int8_t r = reg_read(lis, LIS302DL_REG_CTRL1);
-+ u8 r = (lis->pdata->lis302dl_bitbang_reg_read)(lis, LIS302DL_REG_CTRL1);
-
- if (r & LIS302DL_CTRL1_DR)
- return (duration * 25) / 10;
-@@ -314,18 +280,18 @@ static ssize_t set_freefall_common(int which, struct device *dev,
- /* Turn off the interrupt */
- local_irq_save(flags);
- if (lis->flags & LIS302DL_F_IRQ_WAKE)
-- disable_irq_wake(lis->spi_dev->irq);
-- lis302dl_int_mode(lis->spi_dev, which,
-+ disable_irq_wake(lis->pdata->interrupt);
-+ __lis302dl_int_mode(lis->dev, which,
- LIS302DL_INTMODE_DATA_READY);
- lis->flags &= ~(flag_mask | LIS302DL_F_IRQ_WAKE);
-
-- reg_write(lis, r_cfg, 0);
-- reg_write(lis, r_ths, 0);
-- reg_write(lis, r_duration, 0);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, r_cfg, 0);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, r_ths, 0);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, r_duration, 0);
-
- /* Power off unless the input subsystem is using the device */
- if (!(lis->flags & LIS302DL_F_INPUT_OPEN))
-- reg_set_bit_mask(lis, LIS302DL_REG_CTRL1,
-+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1,
- LIS302DL_CTRL1_PD, 0);
-
- local_irq_restore(flags);
-@@ -337,7 +303,10 @@ static ssize_t set_freefall_common(int which, struct device *dev,
- &and_events) != 6)
- return -EINVAL;
-
-- duration = freefall_ms_to_duration(lis, ms);
-+ local_irq_save(flags);
-+ duration = __freefall_ms_to_duration(lis, ms);
-+ local_irq_save(flags);
-+
- if (duration < 0)
- return -ERANGE;
-
-@@ -355,23 +324,25 @@ static ssize_t set_freefall_common(int which, struct device *dev,
-
- /* Setup the configuration registers */
- local_irq_save(flags);
-- reg_write(lis, r_cfg, 0); /* First zero to get to a known state */
-- reg_write(lis, r_cfg,
-+ /* First zero to get to a known state */
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, r_cfg, 0);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, r_cfg,
- (and_events ? LIS302DL_FFWUCFG_AOI : 0) |
- x_lo | x_hi | y_lo | y_hi | z_lo | z_hi);
-- reg_write(lis, r_ths, threshold & ~LIS302DL_FFWUTHS_DCRM);
-- reg_write(lis, r_duration, duration);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, r_ths,
-+ threshold & ~LIS302DL_FFWUTHS_DCRM);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, r_duration, duration);
-
- /* Route the interrupt for wakeup */
-- lis302dl_int_mode(lis->spi_dev, which, intmode);
-+ __lis302dl_int_mode(lis->dev, which, intmode);
-
- /* Power up the device and note that we want to wake up from
- * this interrupt */
- if (!(lis->flags & LIS302DL_F_IRQ_WAKE))
-- enable_irq_wake(lis->spi_dev->irq);
-+ enable_irq_wake(lis->pdata->interrupt);
-
- lis->flags |= flag_mask | LIS302DL_F_IRQ_WAKE;
-- reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD,
-+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD,
- LIS302DL_CTRL1_PD);
- local_irq_restore(flags);
-
-@@ -403,6 +374,8 @@ static ssize_t show_freefall_common(int which, struct device *dev,
- int r_duration = LIS302DL_REG_FF_WU_DURATION_1;
- int r_cfg = LIS302DL_REG_FF_WU_CFG_1;
- int r_src = LIS302DL_REG_FF_WU_SRC_1;
-+ unsigned long flags;
-+ int ms;
-
- /* Configure second freefall/wakeup pin */
- if (which == 2) {
-@@ -411,11 +384,15 @@ static ssize_t show_freefall_common(int which, struct device *dev,
- r_cfg = LIS302DL_REG_FF_WU_CFG_2;
- r_src = LIS302DL_REG_FF_WU_SRC_2;
- }
-- config = reg_read(lis, r_cfg);
-- threshold = reg_read(lis, r_ths);
-- duration = reg_read(lis, r_duration);
-- r4 = reg_read(lis, r_src);
-- r5 = reg_read(lis, LIS302DL_REG_CTRL3);
-+
-+ local_irq_save(flags);
-+ config = (lis->pdata->lis302dl_bitbang_reg_read)(lis, r_cfg);
-+ threshold = (lis->pdata->lis302dl_bitbang_reg_read)(lis, r_ths);
-+ duration = (lis->pdata->lis302dl_bitbang_reg_read)(lis, r_duration);
-+ r4 = (lis->pdata->lis302dl_bitbang_reg_read)(lis, r_src);
-+ r5 = (lis->pdata->lis302dl_bitbang_reg_read)(lis, LIS302DL_REG_CTRL3);
-+ ms = __freefall_duration_to_ms(lis, duration);
-+ local_irq_restore(flags);
-
- /* All events off? */
- if ((config & (LIS302DL_FFWUCFG_XLIE | LIS302DL_FFWUCFG_XHIE |
-@@ -423,13 +400,14 @@ static ssize_t show_freefall_common(int which, struct device *dev,
- LIS302DL_FFWUCFG_ZLIE | LIS302DL_FFWUCFG_ZHIE)) == 0)
- return sprintf(buf, "off\n");
-
-+
- return sprintf(buf,
- "%s events, %s interrupt, duration %d, threshold %d, "
- "enabled: %s %s %s %s %s %s\n",
- (config & LIS302DL_FFWUCFG_AOI) == 0 ? "or" : "and",
- (config & LIS302DL_FFWUCFG_LIR) == 0 ?
- "don't latch" : "latch",
-- freefall_duration_to_ms(lis, duration), threshold,
-+ ms, threshold,
- (config & LIS302DL_FFWUCFG_XLIE) == 0 ? "---" : "xlo",
- (config & LIS302DL_FFWUCFG_XHIE) == 0 ? "---" : "xhi",
- (config & LIS302DL_FFWUCFG_YLIE) == 0 ? "---" : "ylo",
-@@ -480,14 +458,15 @@ static int lis302dl_input_open(struct input_dev *inp)
-
- local_irq_save(flags);
- /* make sure we're powered up and generate data ready */
-- reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, ctrl1);
-- local_irq_restore(flags);
-+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, ctrl1);
-
- lis->flags |= LIS302DL_F_INPUT_OPEN;
-
- /* kick it off -- since we are edge triggered, if we missed the edge
- * permanent low interrupt is death for us */
-- (lis->pdata->lis302dl_bitbang_read)(lis);
-+ (lis->pdata->lis302dl_bitbang_read_sample)(lis);
-+
-+ local_irq_restore(flags);
-
- return 0;
- }
-@@ -504,13 +483,13 @@ static void lis302dl_input_close(struct input_dev *inp)
- /* since the input core already serializes access and makes sure we
- * only see close() for the close of the last user, we can safely
- * disable the data ready events */
-- reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, 0x00);
-+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, 0x00);
- lis->flags &= ~LIS302DL_F_INPUT_OPEN;
-
- /* however, don't power down the whole device if still needed */
- if (!(lis->flags & LIS302DL_F_WUP_FF ||
- lis->flags & LIS302DL_F_WUP_CLICK)) {
-- reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD,
-+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD,
- 0x00);
- }
- local_irq_restore(flags);
-@@ -524,23 +503,23 @@ static int __lis302dl_reset_device(struct lis302dl_info *lis)
- {
- int timeout = 10;
-
-- reg_write(lis, LIS302DL_REG_CTRL2, LIS302DL_CTRL2_BOOT |
-- LIS302DL_CTRL2_FDS);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, LIS302DL_REG_CTRL2,
-+ LIS302DL_CTRL2_BOOT | LIS302DL_CTRL2_FDS);
-
-- while ((reg_read(lis, LIS302DL_REG_CTRL2) & LIS302DL_CTRL2_BOOT) &&
-- (timeout--))
-+ while (((lis->pdata->lis302dl_bitbang_reg_read)(lis, LIS302DL_REG_CTRL2)
-+ & LIS302DL_CTRL2_BOOT) && (timeout--))
- mdelay(1);
-
- return !!(timeout < 0);
- }
-
--static int __devinit lis302dl_probe(struct spi_device *spi)
-+static int __devinit lis302dl_probe(struct platform_device *pdev)
- {
- int rc;
- struct lis302dl_info *lis;
- u_int8_t wai;
- unsigned long flags;
-- struct lis302dl_platform_data *pdata;
-+ struct lis302dl_platform_data *pdata = pdev->dev.platform_data;
-
- lis = kzalloc(sizeof(*lis), GFP_KERNEL);
- if (!lis)
-@@ -548,38 +527,34 @@ static int __devinit lis302dl_probe(struct spi_device *spi)
-
- local_irq_save(flags);
-
-- mutex_init(&lis->lock);
-- lis->spi_dev = spi;
-+ lis->dev = &pdev->dev;
-
-- spi_set_drvdata(spi, lis);
-+ dev_set_drvdata(lis->dev, lis);
-
-- pdata = spi->dev.platform_data;
-+ lis->pdata = pdata;
-
-- rc = spi_setup(spi);
-- if (rc < 0) {
-- dev_err(&spi->dev, "error during spi_setup\n");
-- dev_set_drvdata(&spi->dev, NULL);
-- goto bail_free_lis;
-- }
-+ /* Configure our IO */
-+ (lis->pdata->lis302dl_suspend_io)(lis, 1);
-
-- wai = reg_read(lis, LIS302DL_REG_WHO_AM_I);
-+ wai = (lis->pdata->lis302dl_bitbang_reg_read)(lis,
-+ LIS302DL_REG_WHO_AM_I);
- if (wai != LIS302DL_WHO_AM_I_MAGIC) {
-- dev_err(&spi->dev, "unknown who_am_i signature 0x%02x\n", wai);
-- dev_set_drvdata(&spi->dev, NULL);
-+ dev_err(lis->dev, "unknown who_am_i signature 0x%02x\n", wai);
-+ dev_set_drvdata(lis->dev, NULL);
- rc = -ENODEV;
- goto bail_free_lis;
- }
-
-- rc = sysfs_create_group(&spi->dev.kobj, &lis302dl_attr_group);
-+ rc = sysfs_create_group(&lis->dev->kobj, &lis302dl_attr_group);
- if (rc) {
-- dev_err(&spi->dev, "error creating sysfs group\n");
-+ dev_err(lis->dev, "error creating sysfs group\n");
- goto bail_free_lis;
- }
-
- /* initialize input layer details */
- lis->input_dev = input_allocate_device();
- if (!lis->input_dev) {
-- dev_err(&spi->dev, "Unable to allocate input device\n");
-+ dev_err(lis->dev, "Unable to allocate input device\n");
- goto bail_sysfs;
- }
-
-@@ -601,57 +576,64 @@ static int __devinit lis302dl_probe(struct spi_device *spi)
-
- rc = input_register_device(lis->input_dev);
- if (rc) {
-- dev_err(&spi->dev, "error %d registering input device\n", rc);
-+ dev_err(lis->dev, "error %d registering input device\n", rc);
- goto bail_inp_dev;
- }
-
- if (__lis302dl_reset_device(lis))
-- dev_err(&spi->dev, "device BOOT reload failed\n");
-+ dev_err(lis->dev, "device BOOT reload failed\n");
-
- /* force us powered */
-- reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD |
-- LIS302DL_CTRL1_Xen |
-- LIS302DL_CTRL1_Yen |
-- LIS302DL_CTRL1_Zen);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, LIS302DL_REG_CTRL1,
-+ LIS302DL_CTRL1_PD |
-+ LIS302DL_CTRL1_Xen |
-+ LIS302DL_CTRL1_Yen |
-+ LIS302DL_CTRL1_Zen);
- mdelay(1);
-
-- reg_write(lis, LIS302DL_REG_CTRL2, 0);
-- reg_write(lis, LIS302DL_REG_CTRL3, LIS302DL_CTRL3_PP_OD |
-- LIS302DL_CTRL3_IHL);
-- reg_write(lis, LIS302DL_REG_FF_WU_THS_1, 0x0);
-- reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1, 0x00);
-- reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, 0x0);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, LIS302DL_REG_CTRL2, 0);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, LIS302DL_REG_CTRL3,
-+ LIS302DL_CTRL3_PP_OD | LIS302DL_CTRL3_IHL);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis,
-+ LIS302DL_REG_FF_WU_THS_1, 0x0);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis,
-+ LIS302DL_REG_FF_WU_DURATION_1, 0x00);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis,
-+ LIS302DL_REG_FF_WU_CFG_1, 0x0);
-
- /* start off in powered down mode; we power up when someone opens us */
-- reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_Xen |
-- LIS302DL_CTRL1_Yen |
-- LIS302DL_CTRL1_Zen);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, LIS302DL_REG_CTRL1,
-+ LIS302DL_CTRL1_Xen |
-+ LIS302DL_CTRL1_Yen |
-+ LIS302DL_CTRL1_Zen);
-
- if (pdata->open_drain)
- /* switch interrupt to open collector, active-low */
-- reg_write(lis, LIS302DL_REG_CTRL3, LIS302DL_CTRL3_PP_OD |
-- LIS302DL_CTRL3_IHL);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis,
-+ LIS302DL_REG_CTRL3, LIS302DL_CTRL3_PP_OD |
-+ LIS302DL_CTRL3_IHL);
- else
- /* push-pull, active-low */
-- reg_write(lis, LIS302DL_REG_CTRL3, LIS302DL_CTRL3_IHL);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis,
-+ LIS302DL_REG_CTRL3, LIS302DL_CTRL3_IHL);
-
-- lis302dl_int_mode(spi, 1, LIS302DL_INTMODE_DATA_READY);
-- lis302dl_int_mode(spi, 2, LIS302DL_INTMODE_DATA_READY);
-+ __lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_DATA_READY);
-+ __lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_DATA_READY);
-
-- reg_read(lis, LIS302DL_REG_STATUS);
-- reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
-- reg_read(lis, LIS302DL_REG_FF_WU_SRC_2);
-- reg_read(lis, LIS302DL_REG_CLICK_SRC);
-+ (lis->pdata->lis302dl_bitbang_reg_read)(lis, LIS302DL_REG_STATUS);
-+ (lis->pdata->lis302dl_bitbang_reg_read)(lis, LIS302DL_REG_FF_WU_SRC_1);
-+ (lis->pdata->lis302dl_bitbang_reg_read)(lis, LIS302DL_REG_FF_WU_SRC_2);
-+ (lis->pdata->lis302dl_bitbang_reg_read)(lis, LIS302DL_REG_CLICK_SRC);
-
-- dev_info(&spi->dev, "Found %s\n", pdata->name);
-+ dev_info(lis->dev, "Found %s\n", pdata->name);
-
- lis->pdata = pdata;
-
-- rc = request_irq(lis->spi_dev->irq, lis302dl_interrupt,
-+ rc = request_irq(pdata->interrupt, lis302dl_interrupt,
- IRQF_TRIGGER_FALLING, "lis302dl", lis);
- if (rc < 0) {
-- dev_err(&spi->dev, "error requesting IRQ %d\n",
-- lis->spi_dev->irq);
-+ dev_err(lis->dev, "error requesting IRQ %d\n",
-+ lis->pdata->interrupt);
- goto bail_inp_reg;
- }
- local_irq_restore(flags);
-@@ -662,50 +644,71 @@ bail_inp_reg:
- bail_inp_dev:
- input_free_device(lis->input_dev);
- bail_sysfs:
-- sysfs_remove_group(&spi->dev.kobj, &lis302dl_attr_group);
-+ sysfs_remove_group(&lis->dev->kobj, &lis302dl_attr_group);
- bail_free_lis:
- kfree(lis);
- local_irq_restore(flags);
- return rc;
- }
-
--static int __devexit lis302dl_remove(struct spi_device *spi)
-+static int __devexit lis302dl_remove(struct platform_device *pdev)
- {
-- struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
-+ struct lis302dl_info *lis = dev_get_drvdata(&pdev->dev);
- unsigned long flags;
-
- /* Reset and power down the device */
- local_irq_save(flags);
-- reg_write(lis, LIS302DL_REG_CTRL3, 0x00);
-- reg_write(lis, LIS302DL_REG_CTRL2, 0x00);
-- reg_write(lis, LIS302DL_REG_CTRL1, 0x00);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, LIS302DL_REG_CTRL3, 0x00);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, LIS302DL_REG_CTRL2, 0x00);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, LIS302DL_REG_CTRL1, 0x00);
- local_irq_restore(flags);
-
- /* Cleanup resources */
-- free_irq(lis->spi_dev->irq, lis);
-- sysfs_remove_group(&spi->dev.kobj, &lis302dl_attr_group);
-+ free_irq(lis->pdata->interrupt, lis);
-+ sysfs_remove_group(&pdev->dev.kobj, &lis302dl_attr_group);
- input_unregister_device(lis->input_dev);
- if (lis->input_dev)
- input_free_device(lis->input_dev);
-- dev_set_drvdata(&spi->dev, NULL);
-+ dev_set_drvdata(lis->dev, NULL);
- kfree(lis);
-
- return 0;
- }
-
- #ifdef CONFIG_PM
--static int lis302dl_suspend(struct spi_device *spi, pm_message_t state)
-+
-+static u8 regs_to_save[] = {
-+ LIS302DL_REG_CTRL1,
-+ LIS302DL_REG_CTRL2,
-+ LIS302DL_REG_CTRL3,
-+ LIS302DL_REG_FF_WU_CFG_1,
-+ LIS302DL_REG_FF_WU_THS_1,
-+ LIS302DL_REG_FF_WU_DURATION_1,
-+ LIS302DL_REG_FF_WU_CFG_2,
-+ LIS302DL_REG_FF_WU_THS_2,
-+ LIS302DL_REG_FF_WU_DURATION_2,
-+ LIS302DL_REG_CLICK_CFG,
-+ LIS302DL_REG_CLICK_THSY_X,
-+ LIS302DL_REG_CLICK_THSZ,
-+ LIS302DL_REG_CLICK_TIME_LIMIT,
-+ LIS302DL_REG_CLICK_LATENCY,
-+ LIS302DL_REG_CLICK_WINDOW,
-+
-+};
-+
-+static int lis302dl_suspend(struct platform_device *pdev, pm_message_t state)
- {
-- struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
-+ struct lis302dl_info *lis = dev_get_drvdata(&pdev->dev);
- unsigned long flags;
- u_int8_t tmp;
-+ int n;
-
- /* determine if we want to wake up from the accel. */
- if (lis->flags & LIS302DL_F_WUP_FF ||
- lis->flags & LIS302DL_F_WUP_CLICK)
- return 0;
-
-- disable_irq(lis->spi_dev->irq);
-+ disable_irq(lis->pdata->interrupt);
- local_irq_save(flags);
-
- /*
-@@ -718,38 +721,15 @@ static int lis302dl_suspend(struct spi_device *spi, pm_message_t state)
- (lis->pdata->lis302dl_suspend_io)(lis, 1);
-
- /* save registers */
-- lis->regs[LIS302DL_REG_CTRL1] = reg_read(lis, LIS302DL_REG_CTRL1);
-- lis->regs[LIS302DL_REG_CTRL2] = reg_read(lis, LIS302DL_REG_CTRL2);
-- lis->regs[LIS302DL_REG_CTRL3] = reg_read(lis, LIS302DL_REG_CTRL3);
-- lis->regs[LIS302DL_REG_FF_WU_CFG_1] =
-- reg_read(lis, LIS302DL_REG_FF_WU_CFG_1);
-- lis->regs[LIS302DL_REG_FF_WU_THS_1] =
-- reg_read(lis, LIS302DL_REG_FF_WU_THS_1);
-- lis->regs[LIS302DL_REG_FF_WU_DURATION_1] =
-- reg_read(lis, LIS302DL_REG_FF_WU_DURATION_1);
-- lis->regs[LIS302DL_REG_FF_WU_CFG_2] =
-- reg_read(lis, LIS302DL_REG_FF_WU_CFG_2);
-- lis->regs[LIS302DL_REG_FF_WU_THS_2] =
-- reg_read(lis, LIS302DL_REG_FF_WU_THS_2);
-- lis->regs[LIS302DL_REG_FF_WU_DURATION_2] =
-- reg_read(lis, LIS302DL_REG_FF_WU_DURATION_2);
-- lis->regs[LIS302DL_REG_CLICK_CFG] =
-- reg_read(lis, LIS302DL_REG_CLICK_CFG);
-- lis->regs[LIS302DL_REG_CLICK_THSY_X] =
-- reg_read(lis, LIS302DL_REG_CLICK_THSY_X);
-- lis->regs[LIS302DL_REG_CLICK_THSZ] =
-- reg_read(lis, LIS302DL_REG_CLICK_THSZ);
-- lis->regs[LIS302DL_REG_CLICK_TIME_LIMIT] =
-- reg_read(lis, LIS302DL_REG_CLICK_TIME_LIMIT);
-- lis->regs[LIS302DL_REG_CLICK_LATENCY] =
-- reg_read(lis, LIS302DL_REG_CLICK_LATENCY);
-- lis->regs[LIS302DL_REG_CLICK_WINDOW] =
-- reg_read(lis, LIS302DL_REG_CLICK_WINDOW);
-+ for (n = 0; n < ARRAY_SIZE(regs_to_save); n++)
-+ lis->regs[regs_to_save[n]] =
-+ (lis->pdata->lis302dl_bitbang_reg_read)(lis,
-+ regs_to_save[n]);
-
- /* power down */
-- tmp = reg_read(lis, LIS302DL_REG_CTRL1);
-+ tmp = (lis->pdata->lis302dl_bitbang_reg_read)(lis, LIS302DL_REG_CTRL1);
- tmp &= ~LIS302DL_CTRL1_PD;
-- reg_write(lis, LIS302DL_REG_CTRL1, tmp);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, LIS302DL_REG_CTRL1, tmp);
-
- /* place our IO to the device in sleep-compatible states */
- (lis->pdata->lis302dl_suspend_io)(lis, 0);
-@@ -759,10 +739,11 @@ static int lis302dl_suspend(struct spi_device *spi, pm_message_t state)
- return 0;
- }
-
--static int lis302dl_resume(struct spi_device *spi)
-+static int lis302dl_resume(struct platform_device *pdev)
- {
-- struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
-+ struct lis302dl_info *lis = dev_get_drvdata(&pdev->dev);
- unsigned long flags;
-+ int n;
-
- if (lis->flags & LIS302DL_F_WUP_FF ||
- lis->flags & LIS302DL_F_WUP_CLICK)
-@@ -774,50 +755,28 @@ static int lis302dl_resume(struct spi_device *spi)
- (lis->pdata->lis302dl_suspend_io)(lis, 1);
-
- /* resume from powerdown first! */
-- reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD |
-- LIS302DL_CTRL1_Xen |
-- LIS302DL_CTRL1_Yen |
-- LIS302DL_CTRL1_Zen);
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, LIS302DL_REG_CTRL1,
-+ LIS302DL_CTRL1_PD |
-+ LIS302DL_CTRL1_Xen |
-+ LIS302DL_CTRL1_Yen |
-+ LIS302DL_CTRL1_Zen);
- mdelay(1);
-
- if (__lis302dl_reset_device(lis))
-- dev_err(&spi->dev, "device BOOT reload failed\n");
-+ dev_err(&pdev->dev, "device BOOT reload failed\n");
-
-- /* restore registers after resume */
-- reg_write(lis, LIS302DL_REG_CTRL1, lis->regs[LIS302DL_REG_CTRL1] |
-- LIS302DL_CTRL1_PD |
-+ lis->regs[LIS302DL_REG_CTRL1] |= LIS302DL_CTRL1_PD |
- LIS302DL_CTRL1_Xen |
- LIS302DL_CTRL1_Yen |
-- LIS302DL_CTRL1_Zen);
-- reg_write(lis, LIS302DL_REG_CTRL2, lis->regs[LIS302DL_REG_CTRL2]);
-- reg_write(lis, LIS302DL_REG_CTRL3, lis->regs[LIS302DL_REG_CTRL3]);
-- reg_write(lis, LIS302DL_REG_FF_WU_CFG_1,
-- lis->regs[LIS302DL_REG_FF_WU_CFG_1]);
-- reg_write(lis, LIS302DL_REG_FF_WU_THS_1,
-- lis->regs[LIS302DL_REG_FF_WU_THS_1]);
-- reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
-- lis->regs[LIS302DL_REG_FF_WU_DURATION_1]);
-- reg_write(lis, LIS302DL_REG_FF_WU_CFG_2,
-- lis->regs[LIS302DL_REG_FF_WU_CFG_2]);
-- reg_write(lis, LIS302DL_REG_FF_WU_THS_2,
-- lis->regs[LIS302DL_REG_FF_WU_THS_2]);
-- reg_write(lis, LIS302DL_REG_FF_WU_DURATION_2,
-- lis->regs[LIS302DL_REG_FF_WU_DURATION_2]);
-- reg_write(lis, LIS302DL_REG_CLICK_CFG,
-- lis->regs[LIS302DL_REG_CLICK_CFG]);
-- reg_write(lis, LIS302DL_REG_CLICK_THSY_X,
-- lis->regs[LIS302DL_REG_CLICK_THSY_X]);
-- reg_write(lis, LIS302DL_REG_CLICK_THSZ,
-- lis->regs[LIS302DL_REG_CLICK_THSZ]);
-- reg_write(lis, LIS302DL_REG_CLICK_TIME_LIMIT,
-- lis->regs[LIS302DL_REG_CLICK_TIME_LIMIT]);
-- reg_write(lis, LIS302DL_REG_CLICK_LATENCY,
-- lis->regs[LIS302DL_REG_CLICK_LATENCY]);
-- reg_write(lis, LIS302DL_REG_CLICK_WINDOW,
-- lis->regs[LIS302DL_REG_CLICK_WINDOW]);
-+ LIS302DL_CTRL1_Zen;
-+
-+ /* restore registers after resume */
-+ for (n = 0; n < ARRAY_SIZE(regs_to_save); n++)
-+ (lis->pdata->lis302dl_bitbang_reg_write)(lis,
-+ regs_to_save[n], lis->regs[regs_to_save[n]]);
-
- local_irq_restore(flags);
-- enable_irq(lis->spi_dev->irq);
-+ enable_irq(lis->pdata->interrupt);
-
- return 0;
- }
-@@ -826,7 +785,7 @@ static int lis302dl_resume(struct spi_device *spi)
- #define lis302dl_resume NULL
- #endif
-
--static struct spi_driver lis302dl_driver = {
-+static struct platform_driver lis302dl_driver = {
- .driver = {
- .name = "lis302dl",
- .owner = THIS_MODULE,
-@@ -838,14 +797,14 @@ static struct spi_driver lis302dl_driver = {
- .resume = lis302dl_resume,
- };
-
--static int __init lis302dl_init(void)
-+static int __devinit lis302dl_init(void)
- {
-- return spi_register_driver(&lis302dl_driver);
-+ return platform_driver_register(&lis302dl_driver);
- }
-
- static void __exit lis302dl_exit(void)
- {
-- spi_unregister_driver(&lis302dl_driver);
-+ platform_driver_unregister(&lis302dl_driver);
- }
-
- MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
-diff --git a/include/linux/lis302dl.h b/include/linux/lis302dl.h
-index 7daa8b3..4578db4 100644
---- a/include/linux/lis302dl.h
-+++ b/include/linux/lis302dl.h
-@@ -15,15 +15,18 @@ struct lis302dl_platform_data {
- unsigned long pin_mosi;
- unsigned long pin_miso;
- int open_drain;
-- void (*lis302dl_bitbang_read)(struct lis302dl_info *);
-+ int interrupt;
-+ void (*lis302dl_bitbang_read_sample)(struct lis302dl_info *);
- void (*lis302dl_suspend_io)(struct lis302dl_info *, int resuming);
-+ int (*lis302dl_bitbang_reg_read)(struct lis302dl_info *, u8 reg);
-+ void (*lis302dl_bitbang_reg_write)(struct lis302dl_info *, u8 reg,
-+ u8 val);
- };
-
- struct lis302dl_info {
- struct lis302dl_platform_data *pdata;
-- struct spi_device *spi_dev;
-+ struct device *dev;
- struct input_dev *input_dev;
-- struct mutex lock;
- unsigned int flags;
- u_int8_t regs[0x40];
- };
---
-1.5.6.5
-
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-20 03:09:37 +0000