diff options
Diffstat (limited to 'target/linux/s3c24xx/patches-2.6.26/1190-fix-lis302dl-resume-and-init-reload-boot-coefficient.patch')
| -rwxr-xr-x | target/linux/s3c24xx/patches-2.6.26/1190-fix-lis302dl-resume-and-init-reload-boot-coefficient.patch | 168 |
1 files changed, 0 insertions, 168 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.26/1190-fix-lis302dl-resume-and-init-reload-boot-coefficient.patch b/target/linux/s3c24xx/patches-2.6.26/1190-fix-lis302dl-resume-and-init-reload-boot-coefficient.patch deleted file mode 100755 index cec5985a9b..0000000000 --- a/target/linux/s3c24xx/patches-2.6.26/1190-fix-lis302dl-resume-and-init-reload-boot-coefficient.patch +++ /dev/null @@ -1,168 +0,0 @@ -From d0c3a8bdfe2722f00b5ec7812500fbf1f6229b9f Mon Sep 17 00:00:00 2001 -From: Andy Green <andy@openmoko.com> -Date: Fri, 25 Jul 2008 23:06:16 +0100 -Subject: [PATCH] fix-lis302dl-resume-and-init-reload-boot-coefficients.patch - Reported-by: John Lee <john_lee@openmoko.com> - -We don't reset the devices either at init or resume, where init -means use the BOOT bit to reload device calibration coefficients -from internal EEPROM. John Lee saw brain-damaged behaviour after -resume and sometimes after boot (since it may not have lost power -to force a BOOT itself that makes sense). - -This patch - - - adds a diagnostic dump feature down /sys - - forces BOOT action on init and resume, and waits for - completion - - makes sure XYZ capture is enabled on resume - - adds some constants in the .h and removes some magic numbers - in the code by using them - -Signed-off-by: Andy Green <andy@openmoko.com> ---- - drivers/input/misc/lis302dl.c | 78 +++++++++++++++++++++++++++++++++++++++-- - include/linux/lis302dl.h | 9 +++++ - 2 files changed, 84 insertions(+), 3 deletions(-) - -diff --git a/drivers/input/misc/lis302dl.c b/drivers/input/misc/lis302dl.c -index 1d19418..553a731 100644 ---- a/drivers/input/misc/lis302dl.c -+++ b/drivers/input/misc/lis302dl.c -@@ -221,9 +221,37 @@ static ssize_t set_scale(struct device *dev, struct device_attribute *attr, - - static DEVICE_ATTR(full_scale, S_IRUGO | S_IWUSR, show_scale, set_scale); - -+static ssize_t lis302dl_dump(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(dev); -+ int n = 0; -+ u8 reg[0x40]; -+ char *end = buf; -+ unsigned long flags; -+ -+ local_save_flags(flags); -+ -+ for (n = 0; n < sizeof(reg); n++) -+ reg[n] = reg_read(lis, n); -+ -+ local_irq_restore(flags); -+ -+ for (n = 0; n < sizeof(reg); n += 16) { -+ hex_dump_to_buffer(reg + n, 16, 16, 1, end, 128, 0); -+ end += strlen(end); -+ *end++ = '\n'; -+ *end++ = '\0'; -+ } -+ -+ return end - buf; -+} -+static DEVICE_ATTR(dump, S_IRUGO, lis302dl_dump, NULL); -+ - static struct attribute *lis302dl_sysfs_entries[] = { - &dev_attr_sample_rate.attr, - &dev_attr_full_scale.attr, -+ &dev_attr_dump.attr, - NULL - }; - -@@ -276,6 +304,24 @@ static void lis302dl_input_close(struct input_dev *inp) - local_irq_restore(flags); - } - -+/* get the device to reload its coefficients from EEPROM and wait for it -+ * to complete -+ */ -+ -+static int __lis302dl_reset_device(struct lis302dl_info *lis) -+{ -+ int timeout = 10; -+ -+ reg_write(lis, LIS302DL_REG_CTRL2, LIS302DL_CTRL2_BOOT | -+ LIS302DL_CTRL2_FDS); -+ -+ while ((reg_read(lis, LIS302DL_REG_CTRL2) & LIS302DL_CTRL2_BOOT) && -+ (timeout--)) -+ mdelay(1); -+ -+ return !!(timeout < 0); -+} -+ - static int __devinit lis302dl_probe(struct spi_device *spi) - { - int rc; -@@ -347,12 +393,24 @@ static int __devinit lis302dl_probe(struct spi_device *spi) - goto bail_inp_dev; - } - -- reg_write(lis, LIS302DL_REG_CTRL1, 0x47); -- reg_write(lis, LIS302DL_REG_CTRL3, 0xc0); -+ if (__lis302dl_reset_device(lis)) -+ dev_err(&spi->dev, "device BOOT reload failed\n"); -+ -+ /* force us powered */ -+ reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD | -+ LIS302DL_CTRL1_Xen | -+ LIS302DL_CTRL1_Yen | -+ LIS302DL_CTRL1_Zen); -+ mdelay(1); -+ -+ reg_write(lis, LIS302DL_REG_CTRL2, 0); -+ reg_write(lis, LIS302DL_REG_CTRL3, LIS302DL_CTRL3_PP_OD | -+ LIS302DL_CTRL3_IHL); - reg_write(lis, LIS302DL_REG_FF_WU_THS_1, 0x14); - reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1, 0x00); - reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, 0x95); - -+ /* start off in powered down mode; we power up when someone opens us */ - reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_Xen | - LIS302DL_CTRL1_Yen | - LIS302DL_CTRL1_Zen); -@@ -494,8 +552,22 @@ static int lis302dl_resume(struct spi_device *spi) - /* get our IO to the device back in operational states */ - (lis->pdata->lis302dl_suspend_io)(lis, 1); - -+ /* resume from powerdown first! */ -+ reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD | -+ LIS302DL_CTRL1_Xen | -+ LIS302DL_CTRL1_Yen | -+ LIS302DL_CTRL1_Zen); -+ mdelay(1); -+ -+ if (__lis302dl_reset_device(lis)) -+ dev_err(&spi->dev, "device BOOT reload failed\n"); -+ - /* restore registers after resume */ -- reg_write(lis, LIS302DL_REG_CTRL1, lis->regs[LIS302DL_REG_CTRL1]); -+ reg_write(lis, LIS302DL_REG_CTRL1, lis->regs[LIS302DL_REG_CTRL1] | -+ LIS302DL_CTRL1_PD | -+ LIS302DL_CTRL1_Xen | -+ LIS302DL_CTRL1_Yen | -+ LIS302DL_CTRL1_Zen); - reg_write(lis, LIS302DL_REG_CTRL2, lis->regs[LIS302DL_REG_CTRL2]); - reg_write(lis, LIS302DL_REG_CTRL3, lis->regs[LIS302DL_REG_CTRL3]); - reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, -diff --git a/include/linux/lis302dl.h b/include/linux/lis302dl.h -index 0d6b4c4..4d8ded9 100644 ---- a/include/linux/lis302dl.h -+++ b/include/linux/lis302dl.h -@@ -66,6 +66,15 @@ enum lis302dl_reg_ctrl1 { - LIS302DL_CTRL1_DR = 0x80, - }; - -+enum lis302dl_reg_ctrl2 { -+ LIS302DL_CTRL2_HPC1 = 0x01, -+ LIS302DL_CTRL2_HPC2 = 0x02, -+ LIS302DL_CTRL2_HPFF1 = 0x04, -+ LIS302DL_CTRL2_HPFF2 = 0x08, -+ LIS302DL_CTRL2_FDS = 0x10, -+ LIS302DL_CTRL2_BOOT = 0x40, -+ LIS302DL_CTRL2_SIM = 0x80, -+}; - enum lis302dl_reg_ctrl3 { - LIS302DL_CTRL3_PP_OD = 0x40, - LIS302DL_CTRL3_IHL = 0x80, --- -1.5.6.3 - |