aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/s3c24xx/patches-2.6.26/1216-fix-scard-stop-on-resume.patch.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/s3c24xx/patches-2.6.26/1216-fix-scard-stop-on-resume.patch.patch')
-rwxr-xr-xtarget/linux/s3c24xx/patches-2.6.26/1216-fix-scard-stop-on-resume.patch.patch51
1 files changed, 0 insertions, 51 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.26/1216-fix-scard-stop-on-resume.patch.patch b/target/linux/s3c24xx/patches-2.6.26/1216-fix-scard-stop-on-resume.patch.patch
deleted file mode 100755
index fd225c35fb..0000000000
--- a/target/linux/s3c24xx/patches-2.6.26/1216-fix-scard-stop-on-resume.patch.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 81b94de6dbb00676ddca78219eacf41b1928b33f Mon Sep 17 00:00:00 2001
-From: Andy Green <andy@openmoko.com>
-Date: Fri, 25 Jul 2008 23:06:20 +0100
-Subject: [PATCH] fix-scard-stop-on-resume.patch
- Reported-by: Ville-Pekka Vainio <vpivaini@cs.helsinki.fi>
-
-The reporter noticed SD Card clock is running again after resume. After
-looking at the code I saw I missed two tricks, this will force it off
-after resume and will do better generally depending on what the last SD Card
-packet was.
-
-Since bulk read packet is normally last action (which set the clock off even
-without this) the old patch worked for normal cases. But after resume, the last
-packet on the wire was not a bulk transfer and we didn't take care about the
-clock then.
-
-Signed-off-by: Andy Green <andy@openmoko.com>
----
- drivers/mfd/glamo/glamo-mci.c | 6 +++---
- 1 files changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/mfd/glamo/glamo-mci.c b/drivers/mfd/glamo/glamo-mci.c
-index 67bb815..93f4074 100644
---- a/drivers/mfd/glamo/glamo-mci.c
-+++ b/drivers/mfd/glamo/glamo-mci.c
-@@ -619,12 +619,9 @@ done:
- host->complete_what = COMPLETION_NONE;
- host->mrq = NULL;
- mmc_request_done(host->mmc, cmd->mrq);
-- return;
--
- bail:
- /* stop the clock to card */
- __glamo_mci_fix_card_div(host, -1);
-- return;
- }
-
- static void glamo_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-@@ -690,6 +687,9 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
- host->real_rate = __glamo_mci_set_card_clock(host, ios->clock, &div);
- host->clk_div = div;
-
-+ /* stop the clock to card, because we are idle until transfer */
-+ __glamo_mci_fix_card_div(host, -1);
-+
- if ((ios->power_mode == MMC_POWER_ON) ||
- (ios->power_mode == MMC_POWER_UP)) {
- dev_info(&host->pdev->dev,
---
-1.5.6.3
-