aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/sunxi/patches-3.18/202-dt-sun7i-add-bluetooth-to-cubietruck.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/sunxi/patches-3.18/202-dt-sun7i-add-bluetooth-to-cubietruck.patch')
-rw-r--r--target/linux/sunxi/patches-3.18/202-dt-sun7i-add-bluetooth-to-cubietruck.patch75
1 files changed, 75 insertions, 0 deletions
diff --git a/target/linux/sunxi/patches-3.18/202-dt-sun7i-add-bluetooth-to-cubietruck.patch b/target/linux/sunxi/patches-3.18/202-dt-sun7i-add-bluetooth-to-cubietruck.patch
new file mode 100644
index 0000000000..f819849448
--- /dev/null
+++ b/target/linux/sunxi/patches-3.18/202-dt-sun7i-add-bluetooth-to-cubietruck.patch
@@ -0,0 +1,75 @@
+From c6e2b7dad39a7887f935458d1c8de84db06243e1 Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens@csie.org>
+Date: Thu, 26 Dec 2013 17:15:47 +0800
+Subject: [PATCH] ARM: dts: sun7i: add bluetooth module to CubieTruck DTS
+
+The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The
+Bluetooth part is a BCM20710 IC connected to UART2 in the A20
+SoC. The IC also takes a 32.768 KHz low power clock input, a power
+enable signal and a wake signal via GPIO.
+
+The Bluetooth module supports out-of-band interrupt signaling via
+GPIO, but this is not supported in this patch.
+---
+ arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 36 ++++++++++++++++++++++++++++++
+ 1 file changed, 36 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+index f9ab5d4..69d8c4c 100644
+--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
++++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+@@ -103,6 +103,20 @@
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
++
++ bt_pwr_pin: bt_pwr_pin@0 {
++ allwinner,pins = "PH18";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++
++ bt_wake_pin: bt_wake_pin@0 {
++ allwinner,pins = "PH24";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
+ };
+
+ pwm: pwm@01c20e00 {
+@@ -123,6 +137,12 @@
+ status = "okay";
+ };
+
++ uart2: serial@01c28800 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart2_pins_a>;
++ status = "okay";
++ };
++
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+@@ -214,4 +234,20 @@
+ enable-active-high;
+ gpio = <&pio 7 9 0>;
+ };
++
++ rfkill-switches {
++ compatible = "simple-bus";
++ pinctrl-names = "default";
++
++ rfkill_bt {
++ compatible = "rfkill-gpio";
++ pinctrl-0 = <&bt_pwr_pin>, <&clk_out_a_pins_a>;
++ rfkill-name = "bt";
++ rfkill-type = <2>;
++ bt_shutdown-gpios = <0>, <&pio 7 18 0>; /* PH18 */
++ bt_reset-gpios = <&pio 7 24 0>; /* PH24 */
++ clocks = <&clk_out_a>;
++ clock-frequency = <32768>;
++ };
++ };
+ };