aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/mvebu/cortexa53/base-files/etc/board.d/02_network3
-rw-r--r--target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts165
-rw-r--r--target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts165
-rw-r--r--target/linux/mvebu/image/cortexa53.mk9
4 files changed, 341 insertions, 1 deletions
diff --git a/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network
index ba4b930426..9b1d97d921 100755
--- a/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network
@@ -14,7 +14,8 @@ case "$board" in
globalscale,espressobin|\
globalscale,espressobin-emmc|\
globalscale,espressobin-v7|\
-globalscale,espressobin-v7-emmc)
+globalscale,espressobin-v7-emmc|\
+glinet,gl-mv1000)
ucidef_set_interfaces_lan_wan "lan0 lan1" "wan"
;;
marvell,armada-3720-db|\
diff --git a/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts
new file mode 100644
index 0000000000..9d7963c5b7
--- /dev/null
+++ b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for GL.iNet GL-MV1000
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+ model = "GL.inet GL-MV1000";
+ compatible = "glinet,gl-mv1000", "marvell,armada3720";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+ };
+
+ vcc_sd_reg1: regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vcc_sd1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ gpios-states = <0>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ enable-active-high;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ m25p,fast-read;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0 0xf0000>;
+ };
+
+ partition@f0000 {
+ label = "u-boot-env";
+ reg = <0Xf0000 0x8000>;
+ };
+
+ factory: partition@f8000 {
+ label = "factory";
+ reg = <0xf8000 0x8000>;
+ };
+ };
+ };
+};
+
+&sdhci1 {
+ wp-inverted;
+ bus-width = <4>;
+ cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
+ marvell,pad-type = "sd";
+ no-1-8-v;
+ vqmmc-supply = <&vcc_sd_reg1>;
+ status = "okay";
+};
+
+&sdhci0 {
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ non-removable;
+ no-sd;
+ no-sdio;
+ marvell,pad-type = "fixed-1-8v";
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&mdio {
+ switch0: switch0@1 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ dsa,member = <0 0>;
+
+ ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&eth0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "wan";
+ phy-handle = <&switch0phy0>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan0";
+ phy-handle = <&switch0phy1>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ phy-handle = <&switch0phy2>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy0: switch0phy0@11 {
+ reg = <0x11>;
+ };
+ switch0phy1: switch0phy1@12 {
+ reg = <0x12>;
+ };
+ switch0phy2: switch0phy2@13 {
+ reg = <0x13>;
+ };
+ };
+ };
+};
+
+&eth0 {
+ mtd-mac-address = <&factory 0x0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts
new file mode 100644
index 0000000000..9d7963c5b7
--- /dev/null
+++ b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for GL.iNet GL-MV1000
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+ model = "GL.inet GL-MV1000";
+ compatible = "glinet,gl-mv1000", "marvell,armada3720";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+ };
+
+ vcc_sd_reg1: regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vcc_sd1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ gpios-states = <0>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ enable-active-high;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ m25p,fast-read;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0 0xf0000>;
+ };
+
+ partition@f0000 {
+ label = "u-boot-env";
+ reg = <0Xf0000 0x8000>;
+ };
+
+ factory: partition@f8000 {
+ label = "factory";
+ reg = <0xf8000 0x8000>;
+ };
+ };
+ };
+};
+
+&sdhci1 {
+ wp-inverted;
+ bus-width = <4>;
+ cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
+ marvell,pad-type = "sd";
+ no-1-8-v;
+ vqmmc-supply = <&vcc_sd_reg1>;
+ status = "okay";
+};
+
+&sdhci0 {
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ non-removable;
+ no-sd;
+ no-sdio;
+ marvell,pad-type = "fixed-1-8v";
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&mdio {
+ switch0: switch0@1 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ dsa,member = <0 0>;
+
+ ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&eth0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "wan";
+ phy-handle = <&switch0phy0>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan0";
+ phy-handle = <&switch0phy1>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ phy-handle = <&switch0phy2>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy0: switch0phy0@11 {
+ reg = <0x11>;
+ };
+ switch0phy1: switch0phy1@12 {
+ reg = <0x12>;
+ };
+ switch0phy2: switch0phy2@13 {
+ reg = <0x13>;
+ };
+ };
+ };
+};
+
+&eth0 {
+ mtd-mac-address = <&factory 0x0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/mvebu/image/cortexa53.mk b/target/linux/mvebu/image/cortexa53.mk
index 77f5c79972..1436c1bd23 100644
--- a/target/linux/mvebu/image/cortexa53.mk
+++ b/target/linux/mvebu/image/cortexa53.mk
@@ -69,3 +69,12 @@ define Device/methode_udpu
BOOT_SCRIPT := udpu
endef
TARGET_DEVICES += methode_udpu
+
+define Device/glinet_gl-mv1000
+ $(call Device/Default-arm64)
+ DEVICE_TITLE := GL.iNet GL-MV1000
+ DEVICE_DTS := armada-gl-mv1000
+ SUPPORTED_DEVICES := glinet,gl-mv1000
+endef
+TARGET_DEVICES += glinet_gl-mv1000
+