diff options
Diffstat (limited to 'target/linux')
| -rw-r--r-- | target/linux/brcm47xx-2.6/patches-2.6.22/240-extif_fixes.patch | 152 |
1 files changed, 152 insertions, 0 deletions
diff --git a/target/linux/brcm47xx-2.6/patches-2.6.22/240-extif_fixes.patch b/target/linux/brcm47xx-2.6/patches-2.6.22/240-extif_fixes.patch new file mode 100644 index 0000000000..413b63b3ff --- /dev/null +++ b/target/linux/brcm47xx-2.6/patches-2.6.22/240-extif_fixes.patch @@ -0,0 +1,152 @@ +Index: linux-2.6.22-rc6/drivers/ssb/driver_mipscore.c +=================================================================== +--- linux-2.6.22-rc6.orig/drivers/ssb/driver_mipscore.c 2007-06-28 11:35:29.077307472 +0200 ++++ linux-2.6.22-rc6/drivers/ssb/driver_mipscore.c 2007-06-28 12:11:01.433140112 +0200 +@@ -128,10 +128,46 @@ + ssb_write32(mdev, SSB_IPSFLAG, irqflag); + } + +-/* XXX: leave here or move into separate extif driver? */ ++static inline bool serial_exists(u8 *regs) ++{ ++ u8 save_mcr, status1 = 0; ++ ++ if (regs) { ++ save_mcr = regs[UART_MCR]; ++ regs[UART_MCR] = (UART_MCR_LOOP | 0x0a); ++ // Fixme UART_MSR_DSR appears in status1 ++ status1 = regs[UART_MSR] & 0xd0; ++ regs[UART_MCR] = save_mcr; ++ } ++ return (status1 == (UART_MSR_DCD | UART_MSR_CTS)); ++} ++ + static int ssb_extif_serial_init(struct ssb_extif *dev, struct ssb_serial_port *ports) + { +- return 0; ++ u32 i, nr_ports = 0; ++ ++ /* Disable GPIO interrupt initially */ ++ extif_write32(dev, SSB_EXTIF_GPIO_INTPOL, 0); ++ extif_write32(dev, SSB_EXTIF_GPIO_INTMASK, 0); ++ ++ for (i = 0; i < 2; i++) { ++ void __iomem *uart_regs; ++ ++ uart_regs = ioremap_nocache(SSB_EUART, 16); ++ uart_regs += (i * 8); ++ ++ if (serial_exists(uart_regs) && ports) { ++ extif_write32(dev, SSB_EXTIF_GPIO_INTMASK, 2); ++ ++ nr_ports++; ++ ports[i].regs = uart_regs; ++ ports[i].irq = 2; ++ ports[i].baud_base = 13500000; ++ ports[i].reg_shift = 0; ++ } ++ iounmap(uart_regs); ++ } ++ return nr_ports; + } + + +@@ -139,40 +175,6 @@ + { + struct ssb_bus *bus = mcore->dev->bus; + +- //TODO if (EXTIF available +-#if 0 +- extifregs_t *eir = (extifregs_t *) regs; +- sbconfig_t *sb; +- +- /* Determine external UART register base */ +- sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF); +- base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1))); +- +- /* Determine IRQ */ +- irq = sb_irq(sbh); +- +- /* Disable GPIO interrupt initially */ +- W_REG(&eir->gpiointpolarity, 0); +- W_REG(&eir->gpiointmask, 0); +- +- /* Search for external UARTs */ +- n = 2; +- for (i = 0; i < 2; i++) { +- regs = (void *) REG_MAP(base + (i * 8), 8); +- if (BCMINIT(serial_exists)(regs)) { +- /* Set GPIO 1 to be the external UART IRQ */ +- W_REG(&eir->gpiointmask, 2); +- if (add) +- add(regs, irq, 13500000, 0); +- } +- } +- +- /* Add internal UART if enabled */ +- if (R_REG(&eir->corecontrol) & CC_UE) +- if (add) +- add((void *) &eir->uartdata, irq, sb_clock(sbh), 2); +- +-#endif + if (bus->extif.dev) + mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports); + else if (bus->chipco.dev) +@@ -219,7 +221,7 @@ + extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp); + } + +-static inline void ssb_extif_get_clockcontrol(struct ssb_extif *extif, ++void ssb_extif_get_clockcontrol(struct ssb_extif *extif, + u32 *pll_type, u32 *n, u32 *m) + { + *pll_type = SSB_PLLTYPE_1; +Index: linux-2.6.22-rc6/drivers/ssb/main.c +=================================================================== +--- linux-2.6.22-rc6.orig/drivers/ssb/main.c 2007-06-28 11:23:38.418344056 +0200 ++++ linux-2.6.22-rc6/drivers/ssb/main.c 2007-06-28 12:07:50.346189744 +0200 +@@ -774,12 +774,12 @@ + u32 plltype; + u32 clkctl_n, clkctl_m; + +- //TODO if EXTIF: PLLTYPE == 1, read n from clockcontrol_n, m from clockcontrol_sb +- +- if (bus->chipco.dev) { ++ if (bus->extif.dev) ++ ssb_extif_get_clockcontrol(&bus->extif, &plltype, &clkctl_n, &clkctl_m); ++ else if (bus->chipco.dev) + ssb_chipco_get_clockcontrol(&bus->chipco, &plltype, + &clkctl_n, &clkctl_m); +- } else ++ else + return 0; + + if (bus->chip_id == 0x5365) { +Index: linux-2.6.22-rc6/include/linux/ssb/ssb_driver_extif.h +=================================================================== +--- linux-2.6.22-rc6.orig/include/linux/ssb/ssb_driver_extif.h 2007-06-28 11:27:47.099538768 +0200 ++++ linux-2.6.22-rc6/include/linux/ssb/ssb_driver_extif.h 2007-06-28 11:28:03.482048248 +0200 +@@ -158,6 +158,8 @@ + /* watchdog */ + #define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */ + ++extern void ssb_extif_get_clockcontrol(struct ssb_extif *, u32 *, u32 *, u32 *); ++ + /* GPIO functions */ + static inline u32 ssb_extif_gpio_in(struct ssb_extif *extif, + u32 mask) +Index: linux-2.6.22-rc6/include/linux/ssb/ssb_regs.h +=================================================================== +--- linux-2.6.22-rc6.orig/include/linux/ssb/ssb_regs.h 2007-06-28 12:09:24.943808720 +0200 ++++ linux-2.6.22-rc6/include/linux/ssb/ssb_regs.h 2007-06-28 12:09:34.606339792 +0200 +@@ -24,8 +24,8 @@ + #define SSB_PCI_DMA_SZ 0x40000000 /* Client Mode sb2pcitranslation2 size in bytes */ + #define SSB_PCIE_DMA_L32 0x00000000 /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */ + #define SSB_PCIE_DMA_H32 0x80000000 /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */ +-#define SSB_EUART (SB_EXTIF_BASE + 0x00800000) +-#define SSB_LED (SB_EXTIF_BASE + 0x00900000) ++#define SSB_EUART (SSB_EXTIF_BASE + 0x00800000) ++#define SSB_LED (SSB_EXTIF_BASE + 0x00900000) + + + /* Enumeration space constants */ |