aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/uci-defaults/01_leds6
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dragino2.c43
3 files changed, 35 insertions, 17 deletions
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index ac7e20d7f0..bbe04b51ee 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -62,6 +62,9 @@ get_status_led() {
dir-835-a1)
status_led="d-link:amber:power"
;;
+ dragino2)
+ status_led="dragino2:red:system"
+ ;;
eap300v2)
status_led="engenius:blue:power"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index aca8509c6b..599fc1920b 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -66,6 +66,12 @@ db120)
ucidef_set_led_usbdev "usb" "USB" "db120:green:usb" "1-1"
;;
+dragino2)
+ ucidef_set_led_wlan "wlan" "WLAN" "dragino2:red:wlan" "phy0tpt"
+ ucidef_set_led_netdev "lan" "LAN" "dragino2:red:lan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "dragino2:red:wan" "eth1"
+ ;;
+
eap300v2)
ucidef_set_led_netdev "lan" "LAN" "engenius:blue:lan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "engenius:blue:wlan" "phy0tpt"
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dragino2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dragino2.c
index 156fbe50eb..95bd6f41a3 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dragino2.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dragino2.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2012 Elektra Wagenrad <elektra@villagetelco.org>
+ * Copyright (C) 2014 Vittorio Gambaletta <openwrt@vittgam.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -27,12 +28,12 @@
#define DRAGINO2_GPIO_LED_WAN 17
/*
- * The following GPIO is actually named "Router" on the board.
- * However, since the "Router" feature is not supported as of yet
- * we use it to display USB activity.
+ * The following GPIO is named "SYS" on newer revisions of the the board.
+ * It was previously used to indicate USB activity, even though it was
+ * named "Router".
*/
-#define DRAGINO2_GPIO_LED_USB 28
+#define DRAGINO2_GPIO_LED_SYS 28
#define DRAGINO2_GPIO_BTN_JUMPSTART 11
#define DRAGINO2_GPIO_BTN_RESET 12
@@ -46,23 +47,23 @@
static struct gpio_led dragino2_leds_gpio[] __initdata = {
{
- .name = "dragino2:red:lan",
- .gpio = DRAGINO2_GPIO_LED_LAN,
- .active_low = 0,
- },
- {
.name = "dragino2:red:wlan",
.gpio = DRAGINO2_GPIO_LED_WLAN,
.active_low = 0,
},
- {
+ {
.name = "dragino2:red:wan",
.gpio = DRAGINO2_GPIO_LED_WAN,
- .active_low = 0,
+ .active_low = 1,
},
{
- .name = "dragino2:red:usb",
- .gpio = DRAGINO2_GPIO_LED_USB,
+ .name = "dragino2:red:lan",
+ .gpio = DRAGINO2_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "dragino2:red:system",
+ .gpio = DRAGINO2_GPIO_LED_SYS,
.active_low = 0,
},
};
@@ -99,15 +100,23 @@ static void __init dragino2_common_setup(void)
ath79_register_mdio(0, 0x0);
- /* Enable GPIO15 and GPIO16 and possibly GPIO26 and GPIO27 */
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN);
+ /* Enable GPIO13, GPIO14, GPIO15, GPIO16 and GPIO17 */
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
- /* LAN ports */
+ /* LAN port */
ath79_register_eth(1);
/* WAN port */
ath79_register_eth(0);
+
+ /* Enable GPIO26 and GPIO27 */
+ ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP,
+ ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP) |
+ AR933X_BOOTSTRAP_MDIO_GPIO_EN);
}
static void __init dragino2_setup(void)