aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi223
-rw-r--r--target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch32
-rw-r--r--target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch2
-rw-r--r--target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch2
-rw-r--r--target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch2
-rw-r--r--target/linux/ipq806x/patches-4.4/176-add-saw_l2-into-ipq8064-DT.patch41
-rw-r--r--target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch2
7 files changed, 90 insertions, 214 deletions
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
index 42281c4d54..cae5fdc3b3 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -7,18 +7,19 @@
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Qualcomm IPQ8065";
- compatible = "qcom,ipq8065";
+ compatible = "qcom,ipq8065", "qcom,ipq8064";
interrupt-parent = <&intc>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -26,82 +27,18 @@
next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
- clocks = <&kraitcc 0>;
- clock-names = "cpu";
+ clocks = <&kraitcc 0>, <&kraitcc 4>;
+ clock-names = "cpu", "l2";
qcom,imem = <&imem>;
clock-latency = <100000>;
- core-supply = <&smb208_s2a>;
+ cpu-supply = <&smb208_s2a>;
voltage-tolerance = <5>;
cooling-min-state = <0>;
cooling-max-state = <10>;
#cooling-cells = <2>;
-
- operating-points-0-0 = <
- /* kHz uV */
- 1725000 1262500
- 1400000 1175000
- 1000000 1100000
- 800000 1050000
- 600000 1000000
- 384000 975000
- >;
- operating-points-0-1 = <
- /* kHz uV */
- 1725000 1262500
- 1400000 1175000
- 1000000 1100000
- 800000 1050000
- 600000 1000000
- 384000 950000
- >;
- operating-points-0-2 = <
- /* kHz uV */
- 1725000 1200000
- 1400000 1125000
- 1000000 1050000
- 800000 1000000
- 600000 950000
- 384000 925000
- >;
- operating-points-0-3 = <
- /* kHz uV */
- 1725000 1175000
- 1400000 1100000
- 1000000 1025000
- 800000 975000
- 600000 925000
- 384000 900000
- >;
- operating-points-0-4 = <
- /* kHz uV */
- 1725000 1150000
- 1400000 1075000
- 1000000 1000000
- 800000 950000
- 600000 900000
- 384000 875000
- >;
- operating-points-0-5 = <
- /* kHz uV */
- 1725000 1100000
- 1400000 1025000
- 1000000 950000
- 800000 900000
- 600000 850000
- 384000 825000
- >;
- operating-points-0-6 = <
- /* kHz uV */
- 1725000 1050000
- 1400000 975000
- 1000000 900000
- 800000 850000
- 600000 800000
- 384000 775000
- >;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -109,92 +46,24 @@
next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
- clocks = <&kraitcc 1>;
- clock-names = "cpu";
+ clocks = <&kraitcc 1>, <&kraitcc 4>;
+ clock-names = "cpu", "l2";
qcom,imem = <&imem>;
clock-latency = <100000>;
- core-supply = <&smb208_s2b>;
+ cpu-supply = <&smb208_s2b>;
cooling-min-state = <0>;
cooling-max-state = <10>;
#cooling-cells = <2>;
-
- operating-points-0-0 = <
- /* kHz uV */
- 1725000 1262500
- 1400000 1175000
- 1000000 1100000
- 800000 1050000
- 600000 1000000
- 384000 975000
- >;
- operating-points-0-1 = <
- /* kHz uV */
- 1725000 1262500
- 1400000 1175000
- 1000000 1100000
- 800000 1050000
- 600000 1000000
- 384000 950000
- >;
- operating-points-0-2 = <
- /* kHz uV */
- 1725000 1200000
- 1400000 1125000
- 1000000 1050000
- 800000 1000000
- 600000 950000
- 384000 925000
- >;
- operating-points-0-3 = <
- /* kHz uV */
- 1725000 1175000
- 1400000 1100000
- 1000000 1025000
- 800000 975000
- 600000 925000
- 384000 900000
- >;
- operating-points-0-4 = <
- /* kHz uV */
- 1725000 1150000
- 1400000 1075000
- 1000000 1000000
- 800000 950000
- 600000 900000
- 384000 875000
- >;
- operating-points-0-5 = <
- /* kHz uV */
- 1725000 1100000
- 1400000 1025000
- 1000000 950000
- 800000 900000
- 600000 850000
- 384000 825000
- >;
- operating-points-0-6 = <
- /* kHz uV */
- 1725000 1050000
- 1400000 975000
- 1000000 900000
- 800000 850000
- 600000 800000
- 384000 775000
- >;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
- clocks = <&kraitcc 4>;
- clock-names = "cache";
- cache-points-kHz = <
- /* kHz uV CPU kHz */
- 1200000 1150000 1200000
- 1000000 1100000 600000
- 384000 1100000 384000
- >;
- vdd_dig-supply = <&smb208_s1a>;
+ qcom,saw = <&saw_l2>;
+ };
+
+ qcom,l2 {
+ qcom,l2-rates = <384000000 1000000000 1200000000>;
};
};
@@ -357,48 +226,6 @@
qcom,switch-mode-frequency = <1200000>;
};
};
-
- rpm_clocks {
- #clock-cells = <0>;
- compatible = "qcom,rpm-clk";
- qcom,rpm-clk-active-only;
-
- cxo_clk: cxo {
- reg = <QCOM_RPM_CXO_CLK>;
- qcom,rpm-clk-name = "cxo";
- qcom,rpm-clk-freq = <25000000>;
- };
-
- pxo_clk: pxo {
- reg = <QCOM_RPM_PXO_CLK>;
- qcom,rpm-clk-name = "pxo";
- qcom,rpm-clk-freq = <25000000>;
- };
-
- ebi1_clk: ebi1 {
- reg = <QCOM_RPM_EBI1_CLK>;
- qcom,rpm-clk-name = "ebi1";
- qcom,rpm-clk-freq = <533000000>;
- };
-
- apps_fabric_clk: apps-fabric {
- reg = <QCOM_RPM_APPS_FABRIC_CLK>;
- qcom,rpm-clk-name = "apps-fabric";
- qcom,rpm-clk-freq = <533000000>;
- };
-
- nss_fabric0_clk: nss-fabric0 {
- reg = <QCOM_RPM_NSS_FABRIC_0_CLK>;
- qcom,rpm-clk-name = "nss-fabric0";
- qcom,rpm-clk-freq = <533000000>;
- };
-
- nss_fabric1_clk: nss-fabric1 {
- reg = <QCOM_RPM_NSS_FABRIC_1_CLK>;
- qcom,rpm-clk-name = "nss-fabric1";
- qcom,rpm-clk-freq = <266000000>;
- };
- };
};
rng@1a500000 {
@@ -511,17 +338,28 @@
};
saw0: regulator@2089000 {
- compatible = "qcom,saw2";
+ compatible = "qcom,saw2", "syscon";
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
regulator;
};
saw1: regulator@2099000 {
- compatible = "qcom,saw2";
+ compatible = "qcom,saw2", "syscon";
reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
regulator;
};
+ saw_l2: regulator@02012000 {
+ compatible = "qcom,saw2", "syscon";
+ reg = <0x02012000 0x1000>;
+ regulator;
+ };
+
+ sic_non_secure: sic-non-secure@12100000 {
+ compatible = "syscon";
+ reg = <0x12100000 0x10000>;
+ };
+
gsbi1: gsbi@12440000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <1>;
@@ -817,6 +655,7 @@
reg = <0x00900000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
};
lcc: clock-controller@28000000 {
@@ -1103,7 +942,7 @@
adm_dma: dma@18300000 {
compatible = "qcom,adm";
reg = <0x18300000 0x100000>;
- interrupts = <0 170 0>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
#dma-cells = <1>;
clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
@@ -1221,6 +1060,7 @@
status = "disabled";
};
+
/* Temporary fixed regulator */
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
@@ -1294,7 +1134,6 @@
#dma-names = "tx", "rx";
};
};
-
};
sfpb_mutex: sfpb-mutex {
diff --git a/target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch b/target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
index aaf140126c..6ca3c62e4e 100644
--- a/target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
+++ b/target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
@@ -4,40 +4,36 @@
next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
-+ clocks = <&kraitcc 0>;
-+ clock-names = "cpu";
++ clocks = <&kraitcc 0>, <&kraitcc 4>;
++ clock-names = "cpu", "l2";
+ clock-latency = <100000>;
-+ core-supply = <&smb208_s2a>;
++ cpu-supply = <&smb208_s2a>;
+ voltage-tolerance = <5>;
};
cpu@1 {
-@@ -36,11 +41,24 @@
+@@ -36,12 +41,20 @@
next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
-+ clocks = <&kraitcc 1>;
-+ clock-names = "cpu";
++ clocks = <&kraitcc 1>, <&kraitcc 4>;
++ clock-names = "cpu", "l2";
+ clock-latency = <100000>;
-+ core-supply = <&smb208_s2b>;
++ cpu-supply = <&smb208_s2b>;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
-+ clocks = <&kraitcc 4>;
-+ clock-names = "cache";
-+ cache-points-kHz = <
-+ /* kHz uV CPU kHz */
-+ 1200000 1150000 1200000
-+ 1000000 1100000 600000
-+ 384000 1100000 384000
-+ >;
-+ vdd_dig-supply = <&smb208_s1a>;
};
++
++ qcom,l2 {
++ qcom,l2-rates = <384000000 1000000000 1200000000>;
++ };
};
-@@ -73,6 +91,46 @@
+ cpu-pmu {
+@@ -73,6 +86,46 @@
};
};
@@ -84,7 +80,7 @@
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
-@@ -215,11 +273,13 @@
+@@ -215,11 +268,13 @@
acc0: clock-controller@2088000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
diff --git a/target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch b/target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch
index b8abd0a4b2..5fc2a3da55 100644
--- a/target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch
+++ b/target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch
@@ -13,7 +13,7 @@ Signed-off-by: Andy Gross <agross@codeaurora.org>
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -727,6 +727,26 @@
+@@ -722,6 +722,26 @@
status = "disabled";
};
diff --git a/target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch b/target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch
index 4fc8a8ce90..bd8c7e752c 100644
--- a/target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch
+++ b/target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch
@@ -26,7 +26,7 @@ arch/arm/boot/dts/qcom-ipq8064.dtsi | 15 +++++++++++++++
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -747,6 +747,22 @@
+@@ -742,6 +742,22 @@
status = "disabled";
};
diff --git a/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch b/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch
index a3a0583f29..1a15a8c645 100644
--- a/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch
+++ b/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch
@@ -4,7 +4,7 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -167,45 +167,37 @@
+@@ -162,45 +162,37 @@
#address-cells = <1>;
#size-cells = <0>;
diff --git a/target/linux/ipq806x/patches-4.4/176-add-saw_l2-into-ipq8064-DT.patch b/target/linux/ipq806x/patches-4.4/176-add-saw_l2-into-ipq8064-DT.patch
new file mode 100644
index 0000000000..d4f6c68a74
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/176-add-saw_l2-into-ipq8064-DT.patch
@@ -0,0 +1,41 @@
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -50,6 +50,7 @@
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
++ qcom,saw = <&saw_l2>;
+ };
+
+ qcom,l2 {
+@@ -276,17 +277,28 @@
+ };
+
+ saw0: regulator@2089000 {
+- compatible = "qcom,saw2";
++ compatible = "qcom,saw2", "syscon";
+ reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
+ saw1: regulator@2099000 {
+- compatible = "qcom,saw2";
++ compatible = "qcom,saw2", "syscon";
+ reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
++ saw_l2: regulator@02012000 {
++ compatible = "qcom,saw2", "syscon";
++ reg = <0x02012000 0x1000>;
++ regulator;
++ };
++
++ sic_non_secure: sic-non-secure@12100000 {
++ compatible = "syscon";
++ reg = <0x12100000 0x10000>;
++ };
++
+ gsbi2: gsbi@12480000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <2>;
diff --git a/target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
index d85d8b02aa..dcdec66603 100644
--- a/target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
+++ b/target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
@@ -121,7 +121,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
};
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -755,6 +755,92 @@
+@@ -762,6 +762,92 @@
status = "disabled";
};