88 files changed, 66817 insertions, 51065 deletions

diff --git a/target/linux/coldfire/patches/001-cf.patch b/target/linux/coldfire/patches/001-cf.patch
deleted file mode 100644
index 66417e7076..0000000000
--- a/target/linux/coldfire/patches/001-cf.patch
+++ /dev/null
@@ -1,51053 +0,0 @@
---- /dev/null
-+++ b/arch/m68k/coldfire/cache.c
-@@ -0,0 +1,43 @@
-+/*
-+ *  linux/arch/m68k/coldfire/cache.c
-+ *
-+ *  Matt Waddel Matt.Waddel@freescale.com
-+ *  Kurt Mahan kmahan@freescale.com
-+ *  Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <asm/cfcache.h>
-+#include <asm/coldfire.h>
-+#include <asm/system.h>
-+
-+/* Cache Control Reg shadow reg */
-+unsigned long shadow_cacr;
-+
-+/**
-+ * cacr_set - Set the Cache Control Register
-+ * @x Value to set
-+ */
-+void cacr_set(unsigned long x)
-+{
-+	shadow_cacr = x;
-+
-+	__asm__ __volatile__ ("movec %0, %%cacr"
-+			      : /* no outputs */
-+			      : "r" (shadow_cacr));
-+}
-+
-+/**
-+ * cacr_get - Get the current value of the Cache Control Register
-+ *
-+ * @return CACR value
-+ */
-+unsigned long cacr_get(void)
-+{
-+	return shadow_cacr;
-+}
---- /dev/null
-+++ b/arch/m68k/coldfire/config.c
-@@ -0,0 +1,483 @@
-+/*
-+ *  linux/arch/m68k/coldfire/config.c
-+ *
-+ *  Kurt Mahan kmahan@freescale.com
-+ *  Matt Waddel Matt.Waddel@freescale.com
-+ *  Copyright Freescale Semiconductor, Inc. 2007, 2008
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/console.h>
-+#include <linux/bootmem.h>
-+#include <linux/mm.h>
-+#include <asm/bootinfo.h>
-+#include <asm/machdep.h>
-+#include <asm/coldfire.h>
-+#include <asm/cfcache.h>
-+#include <asm/cacheflush.h>
-+#include <asm/io.h>
-+#include <asm/cfmmu.h>
-+#include <asm/setup.h>
-+#include <asm/irq.h>
-+#include <asm/traps.h>
-+#include <asm/movs.h>
-+#include <asm/movs.h>
-+#include <asm/page.h>
-+#include <asm/pgalloc.h>
-+
-+#include <asm/mcfsim.h>
-+
-+#if defined(CONFIG_M5445X)
-+#define UBOOT_EXTRA_CLOCKS
-+#elif defined(CONFIG_M547X_8X)
-+#define UBOOT_PCI
-+#endif
-+#include <asm/bootinfo.h>
-+
-+#ifdef CONFIG_M5445X
-+#include <asm/mcf5445x_intc.h>
-+#include <asm/mcf5445x_sdramc.h>
-+#include <asm/mcf5445x_fbcs.h>
-+#include <asm/mcf5445x_dtim.h>
-+#include <asm/mcf5445x_xbs.h>
-+#endif
-+
-+#ifdef CONFIG_M547X_8X
-+#include <asm/m5485gpt.h>
-+#endif
-+
-+extern int get_irq_list(struct seq_file *p, void *v);
-+extern char _text, _end;
-+extern char _etext, _edata, __init_begin, __init_end;
-+extern struct console mcfrs_console;
-+extern char m68k_command_line[CL_SIZE];
-+extern unsigned long availmem;
-+
-+static int irq_enable[NR_IRQS];
-+unsigned long num_pages;
-+
-+/* ethernet mac addresses from uboot */
-+unsigned char uboot_enet0[6];
-+unsigned char uboot_enet1[6];
-+
-+void coldfire_sort_memrec(void)
-+{
-+	int i, j;
-+
-+	/* Sort the m68k_memory records by address */
-+	for (i = 0; i < m68k_num_memory; ++i) {
-+		for (j = i + 1; j < m68k_num_memory; ++j) {
-+			if (m68k_memory[i].addr > m68k_memory[j].addr) {
-+				struct mem_info tmp;
-+				tmp = m68k_memory[i];
-+				m68k_memory[i] = m68k_memory[j];
-+				m68k_memory[j] = tmp;
-+			}
-+		}
-+	}
-+	/* Trim off discontiguous bits */
-+	for (i = 1; i < m68k_num_memory; ++i) {
-+		if ((m68k_memory[i-1].addr + m68k_memory[i-1].size) !=
-+			m68k_memory[i].addr) {
-+			printk(KERN_DEBUG "m68k_parse_bootinfo: addr gap between \
-+				0x%lx & 0x%lx\n",
-+				m68k_memory[i-1].addr+m68k_memory[i-1].size,
-+				m68k_memory[i].addr);
-+			m68k_num_memory = i;
-+			break;
-+		}
-+	}
-+}
-+
-+/*
-+ * UBoot Handler
-+ */
-+int __init uboot_commandline(char *bootargs)
-+{
-+	int len = 0, cmd_line_len;
-+	static struct uboot_record uboot_info;
-+	u32 offset = PAGE_OFFSET_RAW - PHYS_OFFSET;
-+
-+	extern unsigned long uboot_info_stk;
-+
-+	/* validate address */
-+	if ((uboot_info_stk < PAGE_OFFSET_RAW) ||
-+	    (uboot_info_stk >= (PAGE_OFFSET_RAW + CONFIG_SDRAM_SIZE)))
-+		return 0;
-+
-+	/* Add offset to get post-remapped kernel memory location */
-+	uboot_info.bdi = (struct bd_info *)((*(u32 *)(uboot_info_stk)) + offset);
-+	uboot_info.initrd_start = (*(u32 *)(uboot_info_stk+4)) + offset;
-+	uboot_info.initrd_end = (*(u32 *)(uboot_info_stk+8)) + offset;
-+	uboot_info.cmd_line_start = (*(u32 *)(uboot_info_stk+12)) + offset;
-+	uboot_info.cmd_line_stop = (*(u32 *)(uboot_info_stk+16)) + offset;
-+
-+	/* copy over mac addresses */
-+	memcpy(uboot_enet0, uboot_info.bdi->bi_enet0addr, 6);
-+	memcpy(uboot_enet1, uboot_info.bdi->bi_enet1addr, 6);
-+
-+	/* copy command line */
-+	cmd_line_len = uboot_info.cmd_line_stop - uboot_info.cmd_line_start;
-+	if ((cmd_line_len > 0) && (cmd_line_len < CL_SIZE-1))
-+		len = (int)strncpy(bootargs, (char *)uboot_info.cmd_line_start,\
-+				   cmd_line_len);
-+
-+	return len;
-+}
-+
-+/*
-+ * This routine does things not done in the bootloader.
-+ */
-+#if defined(CONFIG_M54451)
-+#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe/rootfs/ ip=172.27.155.51:172.27.155.1"
-+#elif defined(CONFIG_M54455)
-+#define MTD_DEFAULT_COMMAND_LINE "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
-+#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe/rootfs/ ip=172.27.155.55:172.27.155.1"
-+#elif defined(CONFIG_M547X_8X)
-+#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/rigo/rootfs/ ip=172.27.155.75:172.27.155.1"
-+#endif
-+asmlinkage void __init cf_early_init(void)
-+{
-+	struct bi_record *record = (struct bi_record *) &_end;
-+
-+	extern char _end;
-+
-+#if defined(CONFIG_M5445X)
-+	SET_VBR((void *)MCF_RAMBAR1);
-+#elif defined(CONFIG_M547X_8X)
-+	SET_VBR((void *)MCF_RAMBAR0);
-+#endif
-+
-+	/* Mask all interrupts */
-+#if defined(CONFIG_M5445X)
-+	MCF_INTC0_IMRL = 0xFFFFFFFF;
-+	MCF_INTC0_IMRH = 0xFFFFFFFF;
-+	MCF_INTC1_IMRL = 0xFFFFFFFF;
-+	MCF_INTC1_IMRH = 0xFFFFFFFF;
-+#elif defined(CONFIG_M547X_8X)
-+	MCF_IMRL = 0xFFFFFFFF;
-+	MCF_IMRH = 0xFFFFFFFF;
-+#endif
-+
-+#if defined(CONFIG_M5445X)
-+#if defined(CONFIG_NOR_FLASH_BASE)
-+	MCF_FBCS_CSAR(1) = CONFIG_NOR_FLASH_BASE;
-+#else
-+	MCF_FBCS_CSAR(1) = 0x00000000;
-+#endif
-+
-+#if CONFIG_SDRAM_SIZE > (256*1024*1024)
-+	/* Init optional SDRAM chip select */
-+	MCF_SDRAMC_SDCS(1) = (256*1024*1024) | 0x1B;
-+#endif
-+#endif /* CONFIG_M5445X */
-+
-+#if defined(CONFIG_M5445X)
-+	/* Setup SDRAM crossbar(XBS) priorities */
-+	MCF_XBS_PRS2 = (MCF_XBS_PRS_M0(MCF_XBS_PRI_2) |
-+			MCF_XBS_PRS_M1(MCF_XBS_PRI_3) |
-+			MCF_XBS_PRS_M2(MCF_XBS_PRI_4) |
-+			MCF_XBS_PRS_M3(MCF_XBS_PRI_5) |
-+			MCF_XBS_PRS_M5(MCF_XBS_PRI_6) |
-+			MCF_XBS_PRS_M6(MCF_XBS_PRI_1) |
-+			MCF_XBS_PRS_M7(MCF_XBS_PRI_7));
-+#endif
-+
-+	m68k_machtype = MACH_CFMMU;
-+	m68k_fputype = FPU_CFV4E;
-+	m68k_mmutype = MMU_CFV4E;
-+	m68k_cputype = CPU_CFV4E;
-+
-+	m68k_num_memory = 0;
-+	m68k_memory[m68k_num_memory].addr = CONFIG_SDRAM_BASE;
-+	m68k_memory[m68k_num_memory++].size = CONFIG_SDRAM_SIZE;
-+
-+	if (!uboot_commandline(m68k_command_line)) {
-+#if defined(CONFIG_BOOTPARAM)
-+		strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE-1);
-+#else
-+		strcpy(m68k_command_line, DEFAULT_COMMAND_LINE);
-+#endif
-+	}
-+
-+#if defined(CONFIG_BLK_DEV_INITRD)
-+	/* add initrd image */
-+	record = (struct bi_record *) ((void *)record + record->size);
-+	record->tag = BI_RAMDISK;
-+	record->size =  sizeof(record->tag) + sizeof(record->size)
-+		+ sizeof(record->data[0]) + sizeof(record->data[1]);
-+#endif
-+
-+	/* Mark end of tags. */
-+	record = (struct bi_record *) ((void *) record + record->size);
-+	record->tag = 0;
-+	record->data[0] = 0;
-+	record->data[1] = 0;
-+	record->size = sizeof(record->tag) + sizeof(record->size)
-+		+ sizeof(record->data[0]) + sizeof(record->data[1]);
-+
-+	/* Invalidate caches via CACR */
-+	flush_bcache();
-+	cacr_set(CACHE_DISABLE_MODE);
-+
-+	/* Turn on caches via CACR, enable EUSP */
-+	cacr_set(CACHE_INITIAL_MODE);
-+
-+}
-+
-+#if defined(CONFIG_M5445X)
-+void settimericr(unsigned int timer, unsigned int level)
-+{
-+	volatile unsigned char *icrp;
-+	unsigned int icr;
-+	unsigned char irq;
-+
-+	if (timer <= 2) {
-+		switch (timer) {
-+		case 2:  irq = 33; icr = MCFSIM_ICR_TIMER2; break;
-+		default: irq = 32; icr = MCFSIM_ICR_TIMER1; break;
-+		}
-+
-+		icrp = (volatile unsigned char *) (icr);
-+		*icrp = level;
-+		coldfire_enable_irq0(irq);
-+	}
-+}
-+#endif
-+
-+/* Assembler routines */
-+asmlinkage void buserr(void);
-+asmlinkage void trap(void);
-+asmlinkage void system_call(void);
-+asmlinkage void inthandler(void);
-+
-+void __init coldfire_trap_init(void)
-+{
-+	int i = 0;
-+	e_vector *vectors;
-+
-+#if defined(CONFIG_M5445X)
-+	vectors = (e_vector *)MCF_RAMBAR1;
-+#elif defined(CONFIG_M547X_8X)
-+	vectors = (e_vector *)MCF_RAMBAR0;
-+#endif
-+	/*
-+	 * There is a common trap handler and common interrupt
-+	 * handler that handle almost every vector. We treat
-+	 * the system call and bus error special, they get their
-+	 * own first level handlers.
-+	 */
-+	for (i = 3; (i <= 23); i++)
-+		vectors[i] = trap;
-+	for (i = 33; (i <= 63); i++)
-+		vectors[i] = trap;
-+	for (i = 24; (i <= 31); i++)
-+		vectors[i] = inthandler;
-+	for (i = 64; (i < 255); i++)
-+		vectors[i] = inthandler;
-+
-+	vectors[255] = 0;
-+	vectors[2] = buserr;
-+	vectors[32] = system_call;
-+}
-+
-+#if defined(CONFIG_M5445X)
-+
-+void coldfire_tick(void)
-+{
-+	/* Reset the ColdFire timer */
-+	__raw_writeb(MCF_DTIM_DTER_CAP | MCF_DTIM_DTER_REF, MCF_DTIM0_DTER);
-+}
-+
-+void __init coldfire_sched_init(irq_handler_t handler)
-+{
-+	unsigned int	mcf_timerlevel = 5;
-+	unsigned int	mcf_timervector = 64+32;
-+
-+	__raw_writew(MCF_DTIM_DTMR_RST_RST, MCF_DTIM0_DTMR);
-+	__raw_writel(((MCF_BUSCLK / 16) / HZ), MCF_DTIM0_DTRR);
-+	__raw_writew(MCF_DTIM_DTMR_ORRI	| MCF_DTIM_DTMR_CLK_DIV16 |
-+		     MCF_DTIM_DTMR_FRR	| MCF_DTIM_DTMR_RST_EN, \
-+		     MCF_DTIM0_DTMR);
-+
-+	request_irq(mcf_timervector, handler, IRQF_DISABLED, \
-+		    "timer", (void *)MCF_DTIM0_DTMR);
-+
-+	settimericr(1, mcf_timerlevel);
-+}
-+
-+int timerirqpending(int timer)
-+{
-+	unsigned int imr = 0;
-+
-+	switch (timer) {
-+	case 1:  imr = 0x1; break;
-+	case 2:  imr = 0x2; break;
-+	default: break;
-+	}
-+
-+	return (getiprh() & imr);
-+}
-+
-+unsigned long coldfire_gettimeoffset(void)
-+{
-+	volatile unsigned long trr, tcn, offset;
-+
-+	tcn = __raw_readw(MCF_DTIM0_DTCN);
-+	trr = __raw_readl(MCF_DTIM0_DTRR);
-+	offset = (tcn * (1000000 / HZ)) / trr;
-+
-+	/* Check if we just wrapped the counters and maybe missed a tick */
-+	if ((offset < (1000000 / HZ / 2)) && timerirqpending(1))
-+		offset += 1000000 / HZ;
-+	return offset;
-+}
-+
-+#elif defined(CONFIG_M547X_8X)
-+
-+void coldfire_tick(void)
-+{
-+	/* Reset the ColdFire timer */
-+	MCF_SSR(0) = MCF_SSR_ST;
-+}
-+
-+void __init coldfire_sched_init(irq_handler_t handler)
-+{
-+	int irq = ISC_SLTn(0);
-+
-+	MCF_SCR(0) = 0;
-+	MCF_ICR(irq) = ILP_SLT0;
-+	request_irq(64 + irq, handler, IRQF_DISABLED, "ColdFire Timer 0", NULL);
-+	MCF_SLTCNT(0) = MCF_BUSCLK / HZ;
-+	MCF_SCR(0) |=  MCF_SCR_TEN | MCF_SCR_IEN | MCF_SCR_RUN;
-+}
-+
-+unsigned long coldfire_gettimeoffset(void)
-+{
-+	volatile unsigned long trr, tcn, offset;
-+	trr = MCF_SLTCNT(0);
-+	tcn = MCF_SCNT(0);
-+
-+	offset = (trr - tcn) * ((1000000 >> 3) / HZ) / (trr >> 3);
-+	if (MCF_SSR(0) & MCF_SSR_ST)
-+		offset += 1000000 / HZ;
-+
-+	return offset;
-+}
-+
-+#endif
-+
-+void coldfire_reboot(void)
-+{
-+#if defined(CONFIG_M5445X)
-+	/* disable interrupts and do a software reset */
-+	asm("movew #0x2700, %%sr\n\t"
-+	    "moveb #0x80, %%d0\n\t"
-+	    "moveb %%d0, 0xfc0a0000\n\t"
-+	    : : : "%d0");
-+#elif defined(CONFIG_M547X_8X)
-+	/* disable interrupts and enable the watchdog */
-+	printk(KERN_INFO "Rebooting\n");
-+	asm("movew #0x2700, %sr\n");
-+	MCF_GPT_GMS0 = MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4);
-+#endif
-+}
-+
-+static void coldfire_get_model(char *model)
-+{
-+	sprintf(model, "Version 4 ColdFire");
-+}
-+
-+static void __init
-+coldfire_bootmem_alloc(unsigned long memory_start, unsigned long memory_end)
-+{
-+	unsigned long base_pfn;
-+
-+	/* compute total pages in system */
-+	num_pages = PAGE_ALIGN(memory_end - PAGE_OFFSET) >> PAGE_SHIFT;
-+
-+	/* align start/end to page boundries */
-+	memory_start = PAGE_ALIGN(memory_start);
-+	memory_end = memory_end & PAGE_MASK;
-+
-+	/* page numbers */
-+	base_pfn = __pa(PAGE_OFFSET) >> PAGE_SHIFT;
-+	min_low_pfn = __pa(memory_start) >> PAGE_SHIFT;
-+	max_low_pfn = __pa(memory_end) >> PAGE_SHIFT;
-+
-+	high_memory = (void *)memory_end;
-+	availmem = memory_start;
-+
-+	/* setup bootmem data */
-+	m68k_setup_node(0);
-+	availmem += init_bootmem_node(NODE_DATA(0), min_low_pfn,
-+		base_pfn, max_low_pfn);
-+	availmem = PAGE_ALIGN(availmem);
-+	free_bootmem(__pa(availmem), memory_end - (availmem));
-+}
-+
-+void __init config_coldfire(void)
-+{
-+	unsigned long endmem, startmem;
-+	int i;
-+
-+	/*
-+	 * Calculate endmem from m68k_memory, assume all are contiguous
-+	 */
-+	startmem = ((((int) &_end) + (PAGE_SIZE - 1)) & PAGE_MASK);
-+	endmem = PAGE_OFFSET;
-+	for (i = 0; i < m68k_num_memory; ++i)
-+		endmem += m68k_memory[i].size;
-+
-+	printk(KERN_INFO "starting up linux startmem 0x%lx, endmem 0x%lx, \
-+		size %luMB\n", startmem,  endmem, (endmem - startmem) >> 20);
-+
-+	memset(irq_enable, 0, sizeof(irq_enable));
-+
-+	/*
-+	 * Setup coldfire mach-specific handlers
-+	 */
-+	mach_max_dma_address 	= 0xffffffff;
-+	mach_sched_init 	= coldfire_sched_init;
-+	mach_tick		= coldfire_tick;
-+	mach_gettimeoffset 	= coldfire_gettimeoffset;
-+	mach_reset 		= coldfire_reboot;
-+/*	mach_hwclk 		= coldfire_hwclk; to be done */
-+	mach_get_model 		= coldfire_get_model;
-+
-+	coldfire_bootmem_alloc(startmem, endmem-1);
-+
-+	/*
-+	 * initrd setup
-+	 */
-+/* #ifdef CONFIG_BLK_DEV_INITRD
-+	if (m68k_ramdisk.size)  {
-+		reserve_bootmem (__pa(m68k_ramdisk.addr), m68k_ramdisk.size);
-+		initrd_start = (unsigned long) m68k_ramdisk.addr;
-+		initrd_end = initrd_start + m68k_ramdisk.size;
-+		printk (KERN_DEBUG "initrd: %08lx - %08lx\n", initrd_start,
-+			initrd_end);
-+	}
-+#endif */
-+
-+#if defined(CONFIG_DUMMY_CONSOLE) || defined(CONFIG_FRAMEBUFFER_CONSOLE)
-+	conswitchp = &dummy_con;
-+#endif
-+
-+#if defined(CONFIG_SERIAL_COLDFIRE)
-+	/*
-+	 * This causes trouble when it is re-registered later.
-+	 * Currently this is fixed by conditionally commenting
-+	 * out the register_console in mcf_serial.c
-+	 */
-+	register_console(&mcfrs_console);
-+#endif
-+}
---- /dev/null
-+++ b/arch/m68k/coldfire/entry.S
-@@ -0,0 +1,711 @@
-+/*
-+ *  arch/m68k/coldfire/entry.S
-+ *
-+ *  Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
-+ *  Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
-+ *                      Kenneth Albanowski <kjahds@kjahds.com>,
-+ *  Copyright (C) 2000  Lineo Inc. (www.lineo.com)
-+ *  Copyright (C) 2004-2006  Macq Electronique SA. (www.macqel.com)
-+ *  Matt Waddel Matt.Waddel@freescale.com
-+ *  Kurt Mahan kmahan@freescale.com
-+ *  Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ *  Modify irq status in buserr -- (c) Copyright 2008, SYSTEM electronic Gmbh
-+ *
-+ * Based on:
-+ *
-+ *  arch/m68knommu/platform/5307/entry.S &
-+ *  arch/m68k/kernel/entry.S
-+ *
-+ *  Copyright (C) 1991, 1992  Linus Torvalds
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file README.legal in the main directory of this archive
-+ * for more details.
-+ *
-+ * Linux/m68k support by Hamish Macdonald
-+ *
-+ * ColdFire support by Greg Ungerer (gerg@snapgear.com)
-+ * 5307 fixes by David W. Miller
-+ * linux 2.4 support David McCullough <davidm@snapgear.com>
-+ * Bug, speed and maintainability fixes by Philippe De Muyter <phdm@macqel.be>
-+ * Ported to mmu Coldfire by Matt Waddel
-+ */
-+
-+#include <linux/sys.h>
-+#include <linux/linkage.h>
-+#include <asm/cf_entry.h>
-+#include <asm/errno.h>
-+#include <asm/setup.h>
-+#include <asm/segment.h>
-+#include <asm/traps.h>
-+#include <asm/unistd.h>
-+
-+/*
-+ * TASK_INFO:
-+ *
-+ *  - TINFO_PREEMPT (struct thread_info / preempt_count)
-+ *      Used to keep track of preemptability
-+ *  - TINFO_FLAGS (struct thread_info / flags - include/asm-m68k/thread_info.h)
-+ *      Various bit flags that are checked for scheduling/tracing
-+ *	Bits 0-7  are checked every exception exit
-+ *	     8-15 are checked every syscall exit
-+ *
-+ *      TIF_SIGPENDING		6
-+ *      TIF_NEED_RESCHED	7
-+ *      TIF_DELAYED_TRACE	14
-+ *      TIF_SYSCALL_TRACE	15
-+ *      TIF_MEMDIE		16 (never checked here)
-+ */
-+
-+.bss
-+
-+sw_ksp:
-+.long	0
-+
-+sw_usp:
-+.long	0
-+
-+.text
-+
-+.globl system_call
-+.globl buserr
-+.globl trap
-+.globl resume
-+.globl ret_from_exception
-+.globl ret_from_signal
-+.globl sys_call_table
-+.globl ret_from_interrupt
-+.globl inthandler
-+
-+ENTRY(buserr)
-+#ifdef CONFIG_COLDFIRE_FOO
-+	movew	#0x2700,%sr		/* lock interrupts */
-+#endif
-+	SAVE_ALL_INT
-+#ifdef	CONFIG_COLDFIRE_FOO
-+	movew	PT_SR(%sp),%d3		/* get original %sr */
-+	oril	#0x2000,%d3		/* set supervisor mode in it */
-+	movew	%d3,%sr			/* recover irq state */
-+#endif
-+	GET_CURRENT(%d0)
-+	movel   %sp,%sp@-		/* stack frame pointer argument */
-+	jsr     buserr_c
-+	addql   #4,%sp
-+	jra     .Lret_from_exception
-+
-+ENTRY(trap)
-+	SAVE_ALL_INT
-+	GET_CURRENT(%d0)
-+	movel   %sp,%sp@-		/* stack frame pointer argument */
-+	jsr     trap_c
-+	addql   #4,%sp
-+	jra     .Lret_from_exception
-+
-+	/* After a fork we jump here directly from resume,
-+	   %d1 contains the previous task schedule_tail */
-+ENTRY(ret_from_fork)
-+	movel   %d1,%sp@-
-+	jsr     schedule_tail
-+	addql   #4,%sp
-+	jra     .Lret_from_exception
-+
-+do_trace_entry:
-+	movel	#-ENOSYS,%d1		/* needed for strace */
-+	movel	%d1,%sp@(PT_D0)
-+	subql	#4,%sp
-+	SAVE_SWITCH_STACK
-+	jbsr	syscall_trace
-+	RESTORE_SWITCH_STACK
-+	addql	#4,%sp
-+	movel	%sp@(PT_ORIG_D0),%d0
-+	cmpl	#NR_syscalls,%d0
-+	jcs	syscall
-+badsys:
-+	movel	#-ENOSYS,%d1
-+	movel	%d1,%sp@(PT_D0)
-+	jra	ret_from_exception
-+
-+do_trace_exit:
-+	subql	#4,%sp
-+	SAVE_SWITCH_STACK
-+	jbsr	syscall_trace
-+	RESTORE_SWITCH_STACK
-+	addql	#4,%sp
-+	jra	.Lret_from_exception
-+
-+ENTRY(ret_from_signal)
-+	RESTORE_SWITCH_STACK
-+	addql	#4,%sp
-+	jra	.Lret_from_exception
-+
-+ENTRY(system_call)
-+	SAVE_ALL_SYS
-+
-+	GET_CURRENT(%d1)
-+	/* save top of frame */
-+	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
-+
-+	/* syscall trace */
-+	tstb	%curptr@(TASK_INFO+TINFO_FLAGS+2)
-+	jmi	do_trace_entry		/* SYSCALL_TRACE is set */
-+	cmpl	#NR_syscalls,%d0
-+	jcc	badsys
-+syscall:
-+	movel	#sys_call_table,%a0
-+	asll	#2,%d0
-+	addl	%d0,%a0
-+	movel	%a0@,%a0
-+	jsr	%a0@
-+	movel	%d0,%sp@(PT_D0)		/* save the return value */
-+ret_from_syscall:
-+	movew	%curptr@(TASK_INFO+TINFO_FLAGS+2),%d0
-+	jne	syscall_exit_work	/* flags set so process */
-+1:	RESTORE_ALL
-+
-+syscall_exit_work:
-+	btst	#5,%sp@(PT_SR)		/* check if returning to kernel */
-+	bnes	1b			/* if so, skip resched, signals */
-+
-+	btstl	#15,%d0			/* check if SYSCALL_TRACE */
-+	jne	do_trace_exit
-+	btstl	#14,%d0			/* check if DELAYED_TRACE */
-+	jne	do_delayed_trace
-+	btstl	#6,%d0			/* check if SIGPENDING */
-+	jne	do_signal_return
-+	pea	resume_userspace
-+	jra	schedule
-+
-+ENTRY(ret_from_exception)
-+.Lret_from_exception:
-+	btst	#5,%sp@(PT_SR)		/* check if returning to kernel */
-+	bnes	1f			/* if so, skip resched, signals */
-+	movel	%d0,%sp@-		/* Only allow interrupts when we are  */
-+	move	%sr,%d0			/* last one on the kernel stack,      */
-+	andl	#ALLOWINT,%d0		/* otherwise stack overflow can occur */
-+	move	%d0,%sr			/* during heavy interrupt load.       */
-+	movel	%sp@+,%d0
-+
-+resume_userspace:
-+	moveb	%curptr@(TASK_INFO+TINFO_FLAGS+3),%d0
-+	jne	exit_work	/* SIGPENDING and/or NEED_RESCHED set */
-+1:	RESTORE_ALL
-+
-+exit_work:
-+	/* save top of frame */
-+	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
-+	btstl	#6,%d0			/* check for SIGPENDING in flags */
-+	jne	do_signal_return
-+	pea	resume_userspace
-+	jra	schedule
-+
-+do_signal_return:
-+	subql	#4,%sp			/* dummy return address */
-+	SAVE_SWITCH_STACK
-+	pea	%sp@(SWITCH_STACK_SIZE)
-+	clrl	%sp@-
-+	bsrl	do_signal
-+	addql	#8,%sp
-+	RESTORE_SWITCH_STACK
-+	addql	#4,%sp
-+	jbra	resume_userspace
-+
-+do_delayed_trace:
-+	bclr	#7,%sp@(PT_SR)		/* clear trace bit in SR */
-+	pea	1			/* send SIGTRAP */
-+	movel	%curptr,%sp@-
-+	pea	LSIGTRAP
-+	jbsr	send_sig
-+	addql	#8,%sp
-+	addql	#4,%sp
-+	jbra	resume_userspace
-+
-+/*
-+ * This is the interrupt handler (for all hardware interrupt
-+ * sources). It figures out the vector number and calls the appropriate
-+ * interrupt service routine directly.
-+ */
-+ENTRY(inthandler)
-+	SAVE_ALL_INT
-+	GET_CURRENT(%d0)
-+	addql	#1,%curptr@(TASK_INFO+TINFO_PREEMPT)
-+	/* put exception # in d0 */
-+	movel	%sp@(PT_VECTOR),%d0
-+	swap	%d0			/* extract bits 25:18 */
-+	lsrl	#2,%d0
-+	andl	#0x0ff,%d0
-+
-+	movel	%sp,%sp@-
-+	movel	%d0,%sp@-		/* put vector # on stack */
-+auto_irqhandler_fixup = . + 2
-+	jbsr	process_int		/* process the IRQ */
-+	addql	#8,%sp			/* pop parameters off stack */
-+
-+ENTRY(ret_from_interrupt)
-+ret_from_interrupt:
-+
-+	subql	#1,%curptr@(TASK_INFO+TINFO_PREEMPT)
-+	jeq	ret_from_last_interrupt
-+2:	RESTORE_ALL
-+
-+	ALIGN
-+ret_from_last_interrupt:
-+	moveb	%sp@(PT_SR),%d0
-+	andl	#(~ALLOWINT>>8)&0xff,%d0
-+	jne	2b
-+
-+	/* check if we need to do software interrupts */
-+	tstl	irq_stat+CPUSTAT_SOFTIRQ_PENDING
-+	jeq	.Lret_from_exception
-+	pea	ret_from_exception
-+	jra	do_softirq
-+
-+ENTRY(user_inthandler)
-+	SAVE_ALL_INT
-+	GET_CURRENT(%d0)
-+	addql	#1,%curptr@(TASK_INFO+TINFO_PREEMPT)
-+	/* put exception # in d0 */
-+	movel	%sp@(PT_VECTOR),%d0
-+user_irqvec_fixup = . + 2
-+	swap	%d0			/* extract bits 25:18 */
-+	lsrl	#2,%d0
-+	andl	#0x0ff,%d0
-+
-+	movel	%sp,%sp@-
-+	movel	%d0,%sp@-		/* put vector # on stack */
-+user_irqhandler_fixup = . + 2
-+	jbsr	process_int		/* process the IRQ */
-+	addql	#8,%sp			/* pop parameters off stack */
-+
-+	subql	#1,%curptr@(TASK_INFO+TINFO_PREEMPT)
-+	jeq	ret_from_last_interrupt
-+        RESTORE_ALL
-+
-+/* Handler for uninitialized and spurious interrupts */
-+
-+ENTRY(bad_inthandler)
-+	SAVE_ALL_INT
-+	GET_CURRENT(%d0)
-+	addql	#1,%curptr@(TASK_INFO+TINFO_PREEMPT)
-+
-+	movel	%sp,%sp@-
-+	jsr	handle_badint
-+	addql	#4,%sp
-+
-+	subql	#1,%curptr@(TASK_INFO+TINFO_PREEMPT)
-+	jeq	ret_from_last_interrupt
-+	RESTORE_ALL
-+
-+ENTRY(sys_fork)
-+	SAVE_SWITCH_STACK
-+	pea	%sp@(SWITCH_STACK_SIZE)
-+	jbsr	m68k_fork
-+	addql	#4,%sp
-+	RESTORE_SWITCH_STACK
-+	rts
-+
-+ENTRY(sys_clone)
-+	SAVE_SWITCH_STACK
-+	pea	%sp@(SWITCH_STACK_SIZE)
-+	jbsr	m68k_clone
-+	addql	#4,%sp
-+	RESTORE_SWITCH_STACK
-+	rts
-+
-+ENTRY(sys_vfork)
-+	SAVE_SWITCH_STACK
-+	pea	%sp@(SWITCH_STACK_SIZE)
-+	jbsr	m68k_vfork
-+	addql	#4,%sp
-+	RESTORE_SWITCH_STACK
-+	rts
-+
-+ENTRY(sys_sigsuspend)
-+	SAVE_SWITCH_STACK
-+	pea	%sp@(SWITCH_STACK_SIZE)
-+	jbsr	do_sigsuspend
-+	addql	#4,%sp
-+	RESTORE_SWITCH_STACK
-+	rts
-+
-+ENTRY(sys_rt_sigsuspend)
-+	SAVE_SWITCH_STACK
-+	pea	%sp@(SWITCH_STACK_SIZE)
-+	jbsr	do_rt_sigsuspend
-+	addql	#4,%sp
-+	RESTORE_SWITCH_STACK
-+	rts
-+
-+ENTRY(sys_sigreturn)
-+	SAVE_SWITCH_STACK
-+	jbsr	do_sigreturn
-+	RESTORE_SWITCH_STACK
-+	rts
-+
-+ENTRY(sys_rt_sigreturn)
-+	SAVE_SWITCH_STACK
-+	jbsr	do_rt_sigreturn
-+	RESTORE_SWITCH_STACK
-+	rts
-+
-+resume:
-+	/*
-+	 * Beware - when entering resume, prev (the current task) is
-+	 * in a0, next (the new task) is in a1,so don't change these
-+	 * registers until their contents are no longer needed.
-+	 */
-+
-+	/* save sr */
-+	movew	%sr,%d0
-+	movew	%d0,%a0@(TASK_THREAD+THREAD_SR)
-+
-+	/* save usp */
-+	/* Save USP via %a1 (which is saved/restored from %d0) */
-+	movel   %a1,%d0
-+	movel   %usp,%a1
-+	movel   %a1,%a0@(TASK_THREAD+THREAD_USP)
-+	movel   %d0,%a1
-+
-+	/* save non-scratch registers on stack */
-+	SAVE_SWITCH_STACK
-+
-+	/* save current kernel stack pointer */
-+	movel	%sp,%a0@(TASK_THREAD+THREAD_KSP)
-+
-+	/* Return previous task in %d1 */
-+	movel	%curptr,%d1
-+
-+	/* switch to new task (a1 contains new task) */
-+	movel	%a1,%curptr
-+
-+	/* restore the kernel stack pointer */
-+	movel	%a1@(TASK_THREAD+THREAD_KSP),%sp
-+
-+	/* restore non-scratch registers */
-+	RESTORE_SWITCH_STACK
-+
-+	/* restore user stack pointer */
-+	movel	%a1@(TASK_THREAD+THREAD_USP),%a0
-+	movel	%a0,%usp
-+
-+	/* restore status register */
-+	movew	%a1@(TASK_THREAD+THREAD_SR),%d0
-+	movew	%d0,%sr
-+
-+	rts
-+
-+.data
-+ALIGN
-+sys_call_table:
-+	.long sys_ni_syscall	/* 0  -  old "setup()" system call*/
-+	.long sys_exit
-+	.long sys_fork
-+	.long sys_read
-+	.long sys_write
-+	.long sys_open		/* 5 */
-+	.long sys_close
-+	.long sys_waitpid
-+	.long sys_creat
-+	.long sys_link
-+	.long sys_unlink	/* 10 */
-+	.long sys_execve
-+	.long sys_chdir
-+	.long sys_time
-+	.long sys_mknod
-+	.long sys_chmod		/* 15 */
-+	.long sys_chown16
-+	.long sys_ni_syscall			/* old break syscall holder */
-+	.long sys_stat
-+	.long sys_lseek
-+	.long sys_getpid	/* 20 */
-+	.long sys_mount
-+	.long sys_oldumount
-+	.long sys_setuid16
-+	.long sys_getuid16
-+	.long sys_stime		/* 25 */
-+	.long sys_ptrace
-+	.long sys_alarm
-+	.long sys_fstat
-+	.long sys_pause
-+	.long sys_utime		/* 30 */
-+	.long sys_ni_syscall			/* old stty syscall holder */
-+	.long sys_ni_syscall			/* old gtty syscall holder */
-+	.long sys_access
-+	.long sys_nice
-+	.long sys_ni_syscall	/* 35 */	/* old ftime syscall holder */
-+	.long sys_sync
-+	.long sys_kill
-+	.long sys_rename
-+	.long sys_mkdir
-+	.long sys_rmdir		/* 40 */
-+	.long sys_dup
-+	.long sys_pipe
-+	.long sys_times
-+	.long sys_ni_syscall			/* old prof syscall holder */
-+	.long sys_brk		/* 45 */
-+	.long sys_setgid16
-+	.long sys_getgid16
-+	.long sys_signal
-+	.long sys_geteuid16
-+	.long sys_getegid16	/* 50 */
-+	.long sys_acct
-+	.long sys_umount			/* recycled never used phys() */
-+	.long sys_ni_syscall			/* old lock syscall holder */
-+	.long sys_ioctl
-+	.long sys_fcntl		/* 55 */
-+	.long sys_ni_syscall			/* old mpx syscall holder */
-+	.long sys_setpgid
-+	.long sys_ni_syscall			/* old ulimit syscall holder */
-+	.long sys_ni_syscall
-+	.long sys_umask		/* 60 */
-+	.long sys_chroot
-+	.long sys_ustat
-+	.long sys_dup2
-+	.long sys_getppid
-+	.long sys_getpgrp	/* 65 */
-+	.long sys_setsid
-+	.long sys_sigaction
-+	.long sys_sgetmask
-+	.long sys_ssetmask
-+	.long sys_setreuid16	/* 70 */
-+	.long sys_setregid16
-+	.long sys_sigsuspend
-+	.long sys_sigpending
-+	.long sys_sethostname
-+	.long sys_setrlimit	/* 75 */
-+	.long sys_old_getrlimit
-+	.long sys_getrusage
-+	.long sys_gettimeofday
-+	.long sys_settimeofday
-+	.long sys_getgroups16	/* 80 */
-+	.long sys_setgroups16
-+	.long old_select
-+	.long sys_symlink
-+	.long sys_lstat
-+	.long sys_readlink	/* 85 */
-+	.long sys_uselib
-+	.long sys_swapon
-+	.long sys_reboot
-+	.long old_readdir
-+	.long old_mmap		/* 90 */
-+	.long sys_munmap
-+	.long sys_truncate
-+	.long sys_ftruncate
-+	.long sys_fchmod
-+	.long sys_fchown16	/* 95 */
-+	.long sys_getpriority
-+	.long sys_setpriority
-+	.long sys_ni_syscall			/* old profil syscall holder */
-+	.long sys_statfs
-+	.long sys_fstatfs	/* 100 */
-+	.long sys_ni_syscall			/* ioperm for i386 */
-+	.long sys_socketcall
-+	.long sys_syslog
-+	.long sys_setitimer
-+	.long sys_getitimer	/* 105 */
-+	.long sys_newstat
-+	.long sys_newlstat
-+	.long sys_newfstat
-+	.long sys_ni_syscall
-+	.long sys_ni_syscall	/* 110 */	/* iopl for i386 */
-+	.long sys_vhangup
-+	.long sys_ni_syscall			/* obsolete idle() syscall */
-+	.long sys_ni_syscall			/* vm86old for i386 */
-+	.long sys_wait4
-+	.long sys_swapoff	/* 115 */
-+	.long sys_sysinfo
-+	.long sys_ipc
-+	.long sys_fsync
-+	.long sys_sigreturn
-+	.long sys_clone		/* 120 */
-+	.long sys_setdomainname
-+	.long sys_newuname
-+	.long sys_cacheflush			/* modify_ldt for i386 */
-+	.long sys_adjtimex
-+	.long sys_mprotect	/* 125 */
-+	.long sys_sigprocmask
-+	.long sys_ni_syscall			/* old "create_module" */
-+	.long sys_init_module
-+	.long sys_delete_module
-+	.long sys_ni_syscall	/* 130 - old "get_kernel_syms" */
-+	.long sys_quotactl
-+	.long sys_getpgid
-+	.long sys_fchdir
-+	.long sys_bdflush
-+	.long sys_sysfs		/* 135 */
-+	.long sys_personality
-+	.long sys_ni_syscall			/* for afs_syscall */
-+	.long sys_setfsuid16
-+	.long sys_setfsgid16
-+	.long sys_llseek	/* 140 */
-+	.long sys_getdents
-+	.long sys_select
-+	.long sys_flock
-+	.long sys_msync
-+	.long sys_readv		/* 145 */
-+	.long sys_writev
-+	.long sys_getsid
-+	.long sys_fdatasync
-+	.long sys_sysctl
-+	.long sys_mlock		/* 150 */
-+	.long sys_munlock
-+	.long sys_mlockall
-+	.long sys_munlockall
-+	.long sys_sched_setparam
-+	.long sys_sched_getparam	/* 155 */
-+	.long sys_sched_setscheduler
-+	.long sys_sched_getscheduler
-+	.long sys_sched_yield
-+	.long sys_sched_get_priority_max
-+	.long sys_sched_get_priority_min  /* 160 */
-+	.long sys_sched_rr_get_interval
-+	.long sys_nanosleep
-+	.long sys_mremap
-+	.long sys_setresuid16
-+	.long sys_getresuid16	/* 165 */
-+	.long sys_getpagesize
-+	.long sys_ni_syscall			/* old sys_query_module */
-+	.long sys_poll
-+	.long sys_nfsservctl
-+	.long sys_setresgid16	/* 170 */
-+	.long sys_getresgid16
-+	.long sys_prctl
-+	.long sys_rt_sigreturn
-+	.long sys_rt_sigaction
-+	.long sys_rt_sigprocmask	/* 175 */
-+	.long sys_rt_sigpending
-+	.long sys_rt_sigtimedwait
-+	.long sys_rt_sigqueueinfo
-+	.long sys_rt_sigsuspend
-+	.long sys_pread64	/* 180 */
-+	.long sys_pwrite64
-+	.long sys_lchown16;
-+	.long sys_getcwd
-+	.long sys_capget
-+	.long sys_capset	/* 185 */
-+	.long sys_sigaltstack
-+	.long sys_sendfile
-+	.long sys_ni_syscall			/* streams1 */
-+	.long sys_ni_syscall			/* streams2 */
-+	.long sys_vfork		/* 190 */
-+	.long sys_getrlimit
-+	.long sys_mmap2
-+	.long sys_truncate64
-+	.long sys_ftruncate64
-+	.long sys_stat64	/* 195 */
-+	.long sys_lstat64
-+	.long sys_fstat64
-+	.long sys_chown
-+	.long sys_getuid
-+	.long sys_getgid	/* 200 */
-+	.long sys_geteuid
-+	.long sys_getegid
-+	.long sys_setreuid
-+	.long sys_setregid
-+	.long sys_getgroups	/* 205 */
-+	.long sys_setgroups
-+	.long sys_fchown
-+	.long sys_setresuid
-+	.long sys_getresuid
-+	.long sys_setresgid	/* 210 */
-+	.long sys_getresgid
-+	.long sys_lchown
-+	.long sys_setuid
-+	.long sys_setgid
-+	.long sys_setfsuid	/* 215 */
-+	.long sys_setfsgid
-+	.long sys_pivot_root
-+	.long sys_ni_syscall
-+	.long sys_ni_syscall
-+	.long sys_getdents64	/* 220 */
-+	.long sys_gettid
-+	.long sys_tkill
-+	.long sys_setxattr
-+	.long sys_lsetxattr
-+	.long sys_fsetxattr	/* 225 */
-+	.long sys_getxattr
-+	.long sys_lgetxattr
-+	.long sys_fgetxattr
-+	.long sys_listxattr
-+	.long sys_llistxattr	/* 230 */
-+	.long sys_flistxattr
-+	.long sys_removexattr
-+	.long sys_lremovexattr
-+	.long sys_fremovexattr
-+	.long sys_futex		/* 235 */
-+	.long sys_sendfile64
-+	.long sys_mincore
-+	.long sys_madvise
-+	.long sys_fcntl64
-+	.long sys_readahead	/* 240 */
-+	.long sys_io_setup
-+	.long sys_io_destroy
-+	.long sys_io_getevents
-+	.long sys_io_submit
-+	.long sys_io_cancel	/* 245 */
-+	.long sys_fadvise64
-+	.long sys_exit_group
-+	.long sys_lookup_dcookie
-+	.long sys_epoll_create
-+	.long sys_epoll_ctl	/* 250 */
-+	.long sys_epoll_wait
-+	.long sys_remap_file_pages
-+	.long sys_set_tid_address
-+	.long sys_timer_create
-+	.long sys_timer_settime	/* 255 */
-+	.long sys_timer_gettime
-+	.long sys_timer_getoverrun
-+	.long sys_timer_delete
-+	.long sys_clock_settime
-+	.long sys_clock_gettime	/* 260 */
-+	.long sys_clock_getres
-+	.long sys_clock_nanosleep
-+	.long sys_statfs64
-+	.long sys_fstatfs64
-+	.long sys_tgkill	/* 265 */
-+	.long sys_utimes
-+	.long sys_fadvise64_64
-+	.long sys_mbind	
-+	.long sys_get_mempolicy
-+	.long sys_set_mempolicy	/* 270 */
-+	.long sys_mq_open
-+	.long sys_mq_unlink
-+	.long sys_mq_timedsend
-+	.long sys_mq_timedreceive
-+	.long sys_mq_notify	/* 275 */
-+	.long sys_mq_getsetattr
-+	.long sys_waitid
-+	.long sys_ni_syscall			/* for sys_vserver */
-+	.long sys_add_key
-+	.long sys_request_key	/* 280 */
-+	.long sys_keyctl
-+	.long sys_ioprio_set
-+	.long sys_ioprio_get
-+	.long sys_inotify_init
-+	.long sys_inotify_add_watch	/* 285 */
-+	.long sys_inotify_rm_watch
-+	.long sys_migrate_pages
-+	.long sys_openat
-+	.long sys_mkdirat
-+	.long sys_mknodat		/* 290 */
-+	.long sys_fchownat
-+	.long sys_futimesat
-+	.long sys_fstatat64
-+	.long sys_unlinkat
-+	.long sys_renameat		/* 295 */
-+	.long sys_linkat
-+	.long sys_symlinkat
-+	.long sys_readlinkat
-+	.long sys_fchmodat
-+	.long sys_faccessat		/* 300 */
-+	.long sys_ni_syscall			/* Reserved for pselect6 */
-+	.long sys_ni_syscall			/* Reserved for ppoll */
-+	.long sys_unshare
-+	.long sys_set_robust_list
-+	.long sys_get_robust_list	/* 305 */
-+	.long sys_splice
-+	.long sys_sync_file_range
-+	.long sys_tee
-+	.long sys_vmsplice
-+	.long sys_move_pages		/* 310 */
-+
---- /dev/null
-+++ b/arch/m68k/coldfire/head.S
-@@ -0,0 +1,661 @@
-+/*
-+ *  head.S is the MMU enabled ColdFire specific initial boot code
-+ *
-+ *  Ported to ColdFire by
-+ *    Matt Waddel Matt.Waddel@freescale.com
-+ *    Kurt Mahan kmahan@freescale.com
-+ *  Copyright Freescale Semiconductor, Inc. 2007, 2008
-+ *  Phys kernel mapping Copyright Daniel Krueger, SYSTEC electornic GmbH 2008
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ *
-+ *  Parts of this code came from arch/m68k/kernel/head.S
-+ */
-+#include <linux/linkage.h>
-+#include <linux/init.h>
-+#include <asm/bootinfo.h>
-+#include <asm/setup.h>
-+#include <asm/entry.h>
-+#include <asm/pgtable.h>
-+#include <asm/page.h>
-+#include <asm/coldfire.h>
-+#include <asm/mcfuart.h>
-+#include <asm/cfcache.h>
-+
-+#define DEBUG
-+
-+.globl kernel_pg_dir
-+.globl availmem
-+.globl set_context
-+.globl set_fpga
-+
-+#ifdef DEBUG
-+/* When debugging use readable names for labels */
-+#ifdef __STDC__
-+#define L(name) .head.S.##name
-+#else
-+#define L(name) .head.S./**/name
-+#endif
-+#else
-+#ifdef __STDC__
-+#define L(name) .L##name
-+#else
-+#define L(name) .L/**/name
-+#endif
-+#endif
-+
-+/* The __INITDATA stuff is a no-op when ftrace or kgdb are turned on */
-+#ifndef __INITDATA
-+#define __INITDATA	.data
-+#define __FINIT		.previous
-+#endif
-+
-+#if CONFIG_SDRAM_BASE != PAGE_OFFSET
-+/*
-+ * Kernel mapped to virtual ram address.
-+ *
-+ * M5445x:
-+ *    Data[0]: 0xF0000000 -> 0xFFFFFFFF	System regs
-+ *    Data[1]: 0xA0000000 -> 0xAFFFFFFF	PCI
-+ *    Code[0]: Not Mapped
-+ *    Code[1]: Not Mapped
-+ *
-+ * M547x/M548x
-+ *    Data[0]: 0xF0000000 -> 0xFFFFFFFF	System regs
-+ *    Data[1]: Not Mapped
-+ *    Code[0]: Not Mapped
-+ *    Code[1]: Not Mapped
-+ */
-+#if defined(CONFIG_M5445X)
-+#define ACR0_DEFAULT	#0xF00FA048   /* System regs */
-+#define ACR1_DEFAULT	#0xA00FA048   /* PCI */
-+#define ACR2_DEFAULT	#0x00000000   /* Not Mapped */
-+#define ACR3_DEFAULT	#0x00000000   /* Not Mapped */
-+#elif defined(CONFIG_M547X_8X)
-+#define ACR0_DEFAULT	#0xF00FA048   /* System Regs */
-+#define ACR1_DEFAULT	#0x00000000   /* Not Mapped */
-+#define ACR2_DEFAULT	#0x00000000   /* Not Mapped */
-+#define ACR3_DEFAULT	#0x00000000   /* Not Mapped */
-+#endif
-+
-+#else /* CONFIG_SDRAM_BASE = PAGE_OFFSET */
-+/*
-+ * Kernel mapped to physical ram address.
-+ *
-+ * M5445x:
-+ *    Data[0]: 0xF0000000 -> 0xFFFFFFFF	System regs
-+ *    Data[1]: 0x40000000 -> 0x4FFFFFFF	SDRAM - uncached
-+ *    Code[0]: Not Mapped
-+ *    Code[1]: 0x40000000 -> 0x4FFFFFFF	SDRAM - cached
-+ *
-+ * M547x/M548x
-+ *    Data[0]: 0xF0000000 -> 0xFFFFFFFF	System regs
-+ *    Data[1]: 0x00000000 -> 0x0FFFFFFF	SDRAM - uncached
-+ *    Code[0]: Not Mapped
-+ *    Code[1]: 0x00000000 -> 0x0FFFFFFF	SDRAM - cached
-+ */
-+#if defined(CONFIG_M5445X)
-+#define ACR0_DEFAULT	#0xF00FA048   /* System Regs */
-+#define ACR1_DEFAULT	#0x400FA048   /* SDRAM uncached */
-+#define ACR2_DEFAULT	#0x00000000   /* Not mapped */
-+#define ACR3_DEFAULT	#0x400FA008   /* SDRAM cached */
-+#elif defined(CONFIG_M547X_8X)
-+#define ACR0_DEFAULT	#0xF00FA048   /* System Regs */
-+#define ACR1_DEFAULT	#0x000FA048   /* SDRAM uncached */
-+#define ACR2_DEFAULT	#0x00000000   /* Not mapped */
-+#define ACR3_DEFAULT	#0x000FA008   /* SDRAM cached */
-+#endif
-+#endif
-+
-+/* Several macros to make the writing of subroutines easier:
-+ * - func_start marks the beginning of the routine which setups the frame
-+ *   register and saves the registers, it also defines another macro
-+ *   to automatically restore the registers again.
-+ * - func_return marks the end of the routine and simply calls the prepared
-+ *   macro to restore registers and jump back to the caller.
-+ * - func_define generates another macro to automatically put arguments
-+ *   onto the stack call the subroutine and cleanup the stack again.
-+ */
-+
-+.macro	load_symbol_address	symbol,register
-+	movel	#\symbol,\register
-+.endm
-+	
-+.macro	func_start	name,saveregs,savesize,stack=0
-+L(\name):
-+	linkw	%a6,#-\stack
-+	subal	#(\savesize),%sp
-+	moveml	\saveregs,%sp@
-+.set	stackstart,-\stack
-+
-+.macro	func_return_\name
-+	moveml	%sp@,\saveregs
-+	addal	#(\savesize),%sp
-+	unlk	%a6
-+	rts
-+.endm
-+.endm
-+
-+.macro	func_return	name
-+	func_return_\name
-+.endm
-+
-+.macro	func_call	name
-+	jbsr	L(\name)
-+.endm
-+
-+.macro	move_stack	nr,arg1,arg2,arg3,arg4
-+.if	\nr
-+	move_stack	"(\nr-1)",\arg2,\arg3,\arg4
-+	movel	\arg1,%sp@-
-+.endif
-+.endm
-+
-+.macro	func_define	name,nr=0
-+.macro	\name	arg1,arg2,arg3,arg4
-+	move_stack	\nr,\arg1,\arg2,\arg3,\arg4
-+	func_call	\name
-+.if	\nr
-+	lea	%sp@(\nr*4),%sp
-+.endif
-+.endm
-+.endm
-+
-+func_define	serial_putc,1
-+
-+.macro	putc	ch
-+	pea	\ch
-+	func_call	serial_putc
-+	addql	#4,%sp
-+.endm
-+
-+.macro	dputc	ch
-+#ifdef DEBUG
-+	putc	\ch
-+#endif
-+.endm
-+
-+func_define	putn,1
-+
-+.macro	dputn	nr
-+#ifdef DEBUG
-+	putn	\nr
-+#endif
-+.endm
-+
-+#if CONFIG_SDRAM_BASE != PAGE_OFFSET
-+/*
-+	mmu_map  -  creates a new TLB entry
-+
-+	virt_addr      Must be on proper boundary
-+	phys_addr      Must be on proper boundary
-+	itlb           MMUOR_ITLB if instruction TLB or 0
-+	asid           address space ID
-+	shared_global  MMUTR_SG if shared between different ASIDs or 0
-+	size_code      MMUDR_SZ1M  1 MB
-+	               MMUDR_SZ4K  4 KB
-+	               MMUDR_SZ8K  8 KB
-+	               MMUDR_SZ16M 16 MB
-+	cache_mode     MMUDR_INC   instruction non-cacheable
-+                       MMUDR_IC    instruction cacheable
-+                       MMUDR_DWT   data writethrough
-+	               MMUDR_DCB   data copyback
-+	               MMUDR_DNCP  data non-cacheable, precise
-+	               MMUDR_DNCIP data non-cacheable, imprecise
-+	super_prot     MMUDR_SP if user mode generates exception or 0
-+	readable       MMUDR_R if permits read access (data TLB) or 0
-+	writable       MMUDR_W if permits write access (data TLB) or 0
-+	executable     MMUDR_X if permits execute access (instruction TLB) or 0
-+	locked         MMUDR_LK prevents TLB entry from being replaced or 0
-+	temp_data_reg  a data register to use for temporary values
-+*/
-+.macro mmu_map	virt_addr,phys_addr,itlb,asid,shared_global,size_code,cache_mode,super_prot,readable,writable,executable,locked,temp_data_reg
-+	/* Set up search of TLB. */
-+	movel	#(\virt_addr+1), \temp_data_reg
-+	movel	\temp_data_reg, MMUAR
-+	/* Search.  */
-+	movel	#(MMUOR_STLB + MMUOR_ADR +\itlb), \temp_data_reg
-+	movew	\temp_data_reg, (MMUOR)
-+	/* Set up tag value.  */
-+	movel	#(\virt_addr + \asid + \shared_global + MMUTR_V), \temp_data_reg
-+	movel	\temp_data_reg, MMUTR
-+	/* Set up data value.  */
-+	movel	#(\phys_addr + \size_code + \cache_mode + \super_prot + \readable + \writable + \executable + \locked), \temp_data_reg
-+	movel	\temp_data_reg, MMUDR
-+	/* Save it.  */
-+	movel	#(MMUOR_ACC + MMUOR_UAA + \itlb), \temp_data_reg
-+	movew	\temp_data_reg, (MMUOR)
-+.endm	/* mmu_map */
-+
-+.macro mmu_unmap	virt_addr,itlb,temp_data_reg
-+	/* Set up search of TLB. */
-+	movel	#(\virt_addr+1), \temp_data_reg
-+	movel	\temp_data_reg, MMUAR
-+	/* Search.  */
-+	movel	#(MMUOR_STLB + MMUOR_ADR +\itlb), \temp_data_reg
-+	movew	\temp_data_reg, (MMUOR)
-+	/* Test for hit.  */
-+	movel	MMUSR,\temp_data_reg
-+	btst	#MMUSR_HITN,\temp_data_reg
-+	beq	1f
-+	/* Read the TLB.  */
-+	movel	#(MMUOR_RW + MMUOR_ACC +\itlb), \temp_data_reg
-+	movew	\temp_data_reg, (MMUOR)
-+	movel	MMUSR,\temp_data_reg
-+	/* Set up tag value.  */
-+	movel	#0, \temp_data_reg
-+	movel	\temp_data_reg, MMUTR
-+	/* Set up data value.  */
-+	movel	#0, \temp_data_reg
-+	movel	\temp_data_reg, MMUDR
-+	/* Save it.  */
-+	movel	#(MMUOR_ACC + MMUOR_UAA + \itlb), \temp_data_reg
-+	movew	\temp_data_reg, (MMUOR)
-+1:	
-+.endm	/* mmu_unmap */
-+#endif /* CONFIG_SDRAM_BASE != PAGE_OFFSET */
-+
-+/* .text */
-+.section ".text.head","ax"
-+ENTRY(_stext)
-+/* Version numbers of the bootinfo interface -- if we later pass info
-+ * from boot ROM we might want to put something real here.
-+ *
-+ * The area from _stext to _start will later be used as kernel pointer table
-+ */
-+	bras	1f	/* Jump over bootinfo version numbers */
-+
-+	.long	BOOTINFOV_MAGIC
-+	.long	0
-+#if CONFIG_SDRAM_BASE != PAGE_OFFSET
-+1:	jmp	__start-(0xc0000000-CONFIG_SDRAM_BASE)
-+#else
-+1:	jmp	__start
-+#endif
-+
-+.equ	kernel_pg_dir,_stext
-+.equ	.,_stext+0x1000
-+
-+ENTRY(_start)
-+	jra	__start
-+__INIT
-+ENTRY(__start)
-+/* Save the location of u-boot info - cmd line, bd_info, etc. */
-+	movel	%a7,%a4		/* Don't use %a4 before cf_early_init */
-+	addl	#0x00000004,%a4	/* offset past top */
-+	addl	#(PAGE_OFFSET-CONFIG_SDRAM_BASE),%a4	/* high mem offset */
-+
-+/* Setup initial stack pointer */
-+	movel	#CONFIG_SDRAM_BASE+0x1000,%sp
-+
-+/* Setup usp */
-+	subl	%a0,%a0
-+	movel	%a0,%usp
-+
-+#if defined(CONFIG_M5445X)
-+	movel	#0x80000000, %d0
-+	movec	%d0, %rambar1
-+#elif defined(CONFIG_M547X_8X)
-+	movel   #MCF_MBAR, %d0
-+	movec   %d0, %mbar
-+	move.l  #(MCF_RAMBAR0 + 0x21), %d0
-+	movec   %d0, %rambar0
-+	move.l  #(MCF_RAMBAR1 + 0x21), %d0
-+	movec   %d0, %rambar1
-+#endif
-+
-+	movew	#0x2700,%sr
-+
-+/* reset cache */
-+	movel	#(CF_CACR_ICINVA + CF_CACR_DCINVA),%d0
-+	movecl	%d0,%cacr
-+
-+	movel	#(MMU_BASE+1),%d0
-+	movecl	%d0,%mmubar
-+	movel	#MMUOR_CA,%a0  			/* Clear tlb entries */
-+	movew	%a0,(MMUOR)
-+	movel	#(MMUOR_CA + MMUOR_ITLB),%a0 	/* Use ITLB for searches */
-+	movew	%a0,(MMUOR)
-+	movel	#0,%a0 				/* Clear Addr Space User ID */
-+	movecl	%a0,%asid 
-+
-+/* setup ACRs */
-+	movel	ACR0_DEFAULT, %d0  		/* ACR0 (DATA) setup */
-+	movec   %d0, %acr0
-+	nop
-+	movel	ACR1_DEFAULT, %d0  		/* ACR1 (DATA) setup */
-+	movec   %d0, %acr1
-+	nop
-+	movel	ACR2_DEFAULT, %d0  		/* ACR2 (CODE) setup */
-+	movec   %d0, %acr2
-+	nop
-+	movel	ACR3_DEFAULT, %d0  		/* ACR3 (CODE) setup */
-+	movec   %d0, %acr3
-+	nop
-+
-+	/* If you change the memory size to another value make a matching 
-+	   change in paging_init(cf-mmu.c) to zones_size[]. */
-+
-+#if CONFIG_SDRAM_BASE != PAGE_OFFSET
-+#if defined(CONFIG_M5445X)
-+	/* Map 256MB as code */
-+	mmu_map	(PAGE_OFFSET+0*0x1000000),  (PHYS_OFFSET+0*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+1*0x1000000),  (PHYS_OFFSET+1*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+2*0x1000000),  (PHYS_OFFSET+2*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+3*0x1000000),  (PHYS_OFFSET+3*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+4*0x1000000),  (PHYS_OFFSET+4*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+5*0x1000000),  (PHYS_OFFSET+5*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+6*0x1000000),  (PHYS_OFFSET+6*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+7*0x1000000),  (PHYS_OFFSET+7*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+8*0x1000000),  (PHYS_OFFSET+8*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+9*0x1000000),  (PHYS_OFFSET+9*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+10*0x1000000), (PHYS_OFFSET+10*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+11*0x1000000), (PHYS_OFFSET+11*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+12*0x1000000), (PHYS_OFFSET+12*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+13*0x1000000), (PHYS_OFFSET+13*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+14*0x1000000), (PHYS_OFFSET+14*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+15*0x1000000), (PHYS_OFFSET+15*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
-+		0, 0, MMUDR_X, MMUDR_LK, %d0
-+
-+	/* Map 256MB as data also */
-+	mmu_map	(PAGE_OFFSET+0*0x1000000),  (PHYS_OFFSET+0*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+1*0x1000000),  (PHYS_OFFSET+1*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+2*0x1000000),  (PHYS_OFFSET+2*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+3*0x1000000),  (PHYS_OFFSET+3*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+4*0x1000000),  (PHYS_OFFSET+4*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+5*0x1000000),  (PHYS_OFFSET+5*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+6*0x1000000),  (PHYS_OFFSET+6*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+7*0x1000000),  (PHYS_OFFSET+7*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+8*0x1000000),  (PHYS_OFFSET+8*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+9*0x1000000),  (PHYS_OFFSET+9*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+10*0x1000000), (PHYS_OFFSET+10*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+11*0x1000000), (PHYS_OFFSET+11*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+12*0x1000000), (PHYS_OFFSET+12*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+13*0x1000000), (PHYS_OFFSET+13*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+14*0x1000000), (PHYS_OFFSET+14*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+	mmu_map	(PAGE_OFFSET+15*0x1000000), (PHYS_OFFSET+15*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+
-+	/* Map ATA registers -- sacrifice a data TLB due to the hw design */
-+	mmu_map	(0x90000000), (0x90000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, MMUDR_LK, %d0
-+
-+#elif defined(CONFIG_M547X_8X)
-+
-+	/* Map first 8 MB as code */
-+	mmu_map (PAGE_OFFSET+0*1024*1024),  (0*1024*1024), MMUOR_ITLB, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
-+		MMUDR_LK, %d0
-+	mmu_map (PAGE_OFFSET+1*1024*1024),  (1*1024*1024), MMUOR_ITLB, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
-+		MMUDR_LK, %d0
-+	mmu_map (PAGE_OFFSET+2*1024*1024),  (2*1024*1024), MMUOR_ITLB, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
-+		MMUDR_LK, %d0
-+	mmu_map (PAGE_OFFSET+3*1024*1024),  (3*1024*1024), MMUOR_ITLB, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
-+		MMUDR_LK, %d0
-+	mmu_map (PAGE_OFFSET+4*1024*1024),  (4*1024*1024), MMUOR_ITLB, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
-+		MMUDR_LK, %d0
-+	mmu_map (PAGE_OFFSET+5*1024*1024),  (5*1024*1024), MMUOR_ITLB, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
-+		MMUDR_LK, %d0
-+	mmu_map (PAGE_OFFSET+6*1024*1024),  (6*1024*1024), MMUOR_ITLB, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
-+		MMUDR_LK, %d0
-+	mmu_map (PAGE_OFFSET+7*1024*1024),  (7*1024*1024), MMUOR_ITLB, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
-+		MMUDR_LK, %d0
-+
-+	/* Map first 8 MB as data */
-+	mmu_map (PAGE_OFFSET+0*1024*1024),  (0*1024*1024), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+		MMUDR_W, 0, MMUDR_LK, %d0
-+	mmu_map (PAGE_OFFSET+1*1024*1024),  (1*1024*1024), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+		MMUDR_W, 0, MMUDR_LK, %d0
-+	mmu_map (PAGE_OFFSET+2*1024*1024),  (2*1024*1024), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+		MMUDR_W, 0, MMUDR_LK, %d0
-+	mmu_map (PAGE_OFFSET+3*1024*1024),  (3*1024*1024), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+		MMUDR_W, 0, MMUDR_LK, %d0
-+	mmu_map (PAGE_OFFSET+4*1024*1024),  (4*1024*1024), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+		MMUDR_W, 0, MMUDR_LK, %d0
-+	mmu_map (PAGE_OFFSET+5*1024*1024),  (5*1024*1024), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+		MMUDR_W, 0, MMUDR_LK, %d0
-+	mmu_map (PAGE_OFFSET+6*1024*1024),  (6*1024*1024), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+		MMUDR_W, 0, MMUDR_LK, %d0
-+	mmu_map (PAGE_OFFSET+7*1024*1024),  (7*1024*1024), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
-+		MMUDR_W, 0, MMUDR_LK, %d0
-+#endif
-+	/*
-+	 * Do unity mapping to enable the MMU.  Map first chunk of memory
-+	 * in place as code/data.  The TLBs will be deleted after the MMU is
-+	 * enabled and we are executing in high memory.
-+	 */
-+
-+#if defined(CONFIG_M5445X)
-+	/* Map first 16 MB as code */
-+	mmu_map	(PHYS_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), \
-+		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_INC,  MMUDR_SP, 0, \
-+		0, MMUDR_X, 0, %d0
-+	/* Map first 16 MB as data too  */
-+	mmu_map	(PHYS_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
-+		0, 0, %d0
-+#elif defined(CONFIG_M547X_8X)
-+	/* Map first 4 MB as code */
-+	mmu_map (0*1024*1024), (0*1024*1024), MMUOR_ITLB, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, \
-+		MMUDR_X, 0, %d0
-+	mmu_map (1*1024*1024), (1*1024*1024), MMUOR_ITLB, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, \
-+		MMUDR_X, 0, %d0
-+	mmu_map (2*1024*1024), (2*1024*1024), MMUOR_ITLB, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, \
-+		MMUDR_X, 0, %d0
-+	mmu_map (3*1024*1024), (3*1024*1024), MMUOR_ITLB, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, \
-+		MMUDR_X, 0, %d0
-+
-+	/* Map first 4 MB as data too */
-+	mmu_map (0*1024*1024), (0*1024*1024), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \
-+		MMUDR_W, 0, 0, %d0
-+	mmu_map (1*1024*1024), (1*1024*1024), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \
-+		MMUDR_W, 0, 0, %d0
-+	mmu_map (2*1024*1024), (2*1024*1024), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \
-+		MMUDR_W, 0, 0, %d0
-+	mmu_map (3*1024*1024), (3*1024*1024), 0, 0, \
-+		MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \
-+		MMUDR_W, 0, 0, %d0
-+#endif
-+#endif /* CONFIG_SDRAM_BASE != PAGE_OFFSET */
-+
-+	/* Turn on MMU */
-+	movel	#(MMUCR_EN),%a0
-+	movel	%a0,MMUCR
-+	nop	/* This synchs the pipeline after a write to MMUCR */
-+
-+	movel	#__running_high,%a0  /* Get around PC-relative addressing. */
-+	jmp	%a0@
-+
-+ENTRY(__running_high)
-+	load_symbol_address _stext,%sp
-+	movel	L(memory_start),%a0
-+	movel	%a0,availmem
-+	load_symbol_address L(phys_kernel_start),%a0
-+	load_symbol_address _stext,%a1
-+	subl	#_stext,%a1
-+	addl	#PAGE_OFFSET,%a1
-+	movel	%a1,%a0@
-+
-+/* zero bss */
-+	lea	_sbss,%a0
-+	lea	_ebss,%a1
-+	clrl	%d0
-+_loop_bss:
-+	movel	%d0,(%a0)+
-+	cmpl	%a0,%a1
-+	bne	_loop_bss
-+
-+	/* Unmap unity mappings */
-+#if CONFIG_SDRAM_BASE != PAGE_OFFSET
-+#if defined(CONFIG_M5445X)
-+	mmu_unmap (PHYS_OFFSET+0*0x1000000), MMUOR_ITLB, %d0
-+	mmu_unmap (PHYS_OFFSET+0*0x1000000), 0, %d0
-+#elif defined(CONFIG_M547X_8X)
-+	mmu_unmap (PHYS_OFFSET+0*0x1000000), MMUOR_ITLB, %d0
-+	mmu_unmap (PHYS_OFFSET+1*0x1000000), MMUOR_ITLB, %d0
-+	mmu_unmap (PHYS_OFFSET+2*0x1000000), MMUOR_ITLB, %d0
-+	mmu_unmap (PHYS_OFFSET+3*0x1000000), MMUOR_ITLB, %d0
-+	mmu_unmap (PHYS_OFFSET+0*0x1000000), 0, %d0
-+	mmu_unmap (PHYS_OFFSET+1*0x1000000), 0, %d0
-+	mmu_unmap (PHYS_OFFSET+2*0x1000000), 0, %d0
-+	mmu_unmap (PHYS_OFFSET+3*0x1000000), 0, %d0
-+#endif
-+#endif /* CONFIG_SDRAM_BASE != PAGE_OFFSET */
-+
-+/* Setup initial stack pointer */
-+	lea	init_task,%a2 
-+	lea	init_thread_union+THREAD_SIZE,%sp
-+	subl	%a6,%a6		/* clear a6 for gdb */
-+
-+#ifdef CONFIG_MCF_USER_HALT
-+/* Setup debug control reg to allow halts from user space */
-+	lea	wdbg_uhe,%a0
-+	wdebug	(%a0)
-+#endif
-+
-+	movel	%a4,uboot_info_stk /* save uboot info to variable */
-+	jsr	cf_early_init
-+	jmp	start_kernel
-+
-+.section ".text.head","ax"
-+set_context:
-+func_start	set_context,%d0,(1*4)
-+	movel	12(%sp),%d0
-+	movec	%d0,%asid
-+func_return	set_context
-+
-+#ifdef CONFIG_M5445X
-+/*
-+ * set_fpga(addr,val) on the M5445X
-+ *
-+ * Map in 0x00000000 -> 0x0fffffff and then do the write.
-+ */
-+set_fpga:
-+#if 0
-+	movew	%sr,%d1
-+	movew	#0x2700,%sr
-+	movel	ACR0_FPGA, %d0
-+	movec   %d0, %acr0
-+	nop
-+	moveal	4(%sp),%a0
-+	movel	8(%sp),%a0@
-+	movel	ACR0_DEFAULT, %d0
-+	movec   %d0, %acr0
-+	nop
-+	movew	%d1,%sr
-+#endif
-+	rts
-+#endif
-+
-+	.data
-+	.align	4
-+
-+availmem:
-+	.long	0
-+L(phys_kernel_start):
-+	.long	PAGE_OFFSET
-+L(kernel_end):
-+	.long	0
-+L(memory_start):
-+	.long	PAGE_OFFSET_RAW
-+
-+#ifdef CONFIG_MCF_USER_HALT
-+/*
-+ * Enable User Halt Enable in the debug control register.
-+ */
-+wdbg_uhe:
-+	.word	0x2c80	/* DR0 */
-+	.word	0x00b0	/* 31:16 */
-+	.word	0x0400	/* 15:0 -- enable UHE */
-+	.word	0x0000	/* unused */
-+#endif
-+
-+
---- /dev/null
-+++ b/arch/m68k/coldfire/ints.c
-@@ -0,0 +1,463 @@
-+/*
-+ * linux/arch/m68k/coldfire/ints.c -- General interrupt handling code
-+ *
-+ * Copyright (C) 1999-2002  Greg Ungerer (gerg@snapgear.com)
-+ * Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
-+ *                     Kenneth Albanowski <kjahds@kjahds.com>,
-+ * Copyright (C) 2000  Lineo Inc. (www.lineo.com)
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007, 2008
-+ * 	Kurt Mahan kmahan@freescale.com
-+ * 	Matt Waddel Matt.Waddel@freescale.com
-+ *
-+ * Based on:
-+ * linux/arch/m68k/kernel/ints.c &
-+ * linux/arch/m68knommu/5307/ints.c
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/errno.h>
-+#include <linux/seq_file.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/system.h>
-+#include <asm/irq.h>
-+#include <asm/traps.h>
-+#include <asm/page.h>
-+#include <asm/machdep.h>
-+#include <asm/irq_regs.h>
-+
-+#include <asm/mcfsim.h>
-+
-+/*
-+ * IRQ Handler lists.
-+ */
-+static struct irq_node *irq_list[SYS_IRQS];
-+static struct irq_controller *irq_controller[SYS_IRQS];
-+static int irq_depth[SYS_IRQS];
-+
-+/*
-+ * IRQ Controller
-+ */
-+#if defined(CONFIG_M5445X)
-+void m5445x_irq_enable(unsigned int irq);
-+void m5445x_irq_disable(unsigned int irq);
-+static struct irq_controller m5445x_irq_controller = {
-+	.name		= "M5445X",
-+	.lock		= SPIN_LOCK_UNLOCKED,
-+	.enable		= m5445x_irq_enable,
-+	.disable	= m5445x_irq_disable,
-+};
-+#elif defined(CONFIG_M547X_8X)
-+void m547x_8x_irq_enable(unsigned int irq);
-+void m547x_8x_irq_disable(unsigned int irq);
-+static struct irq_controller m547x_8x_irq_controller = {
-+	.name		= "M547X_8X",
-+	.lock		= SPIN_LOCK_UNLOCKED,
-+	.enable		= m547x_8x_irq_enable,
-+	.disable	= m547x_8x_irq_disable,
-+};
-+#else
-+# error No IRQ controller defined
-+#endif
-+
-+#define	POOL_SIZE 	SYS_IRQS
-+static struct irq_node  pool[POOL_SIZE];
-+static struct irq_node *get_irq_node(void);
-+
-+/* The number of spurious interrupts */
-+unsigned int num_spurious;
-+asmlinkage void handle_badint(struct pt_regs *regs);
-+
-+/*
-+ * void init_IRQ(void)
-+ *
-+ * This function should be called during kernel startup to initialize
-+ * the IRQ handling routines.
-+ */
-+void __init init_IRQ(void)
-+{
-+	int i;
-+
-+#if defined(CONFIG_M5445X)
-+	for (i = 0; i < SYS_IRQS; i++)
-+		irq_controller[i] = &m5445x_irq_controller;
-+#elif defined(CONFIG_M547X_8X)
-+	for (i = 0; i < SYS_IRQS; i++)
-+		irq_controller[i] = &m547x_8x_irq_controller;
-+#endif
-+}
-+
-+/*
-+ * process_int(unsigned long vec, struct pt_regs *fp)
-+ *
-+ * Process an interrupt.  Called from entry.S.
-+ */
-+asmlinkage void process_int(unsigned long vec, struct pt_regs *fp)
-+{
-+	struct pt_regs *old_regs;
-+	struct irq_node *node;
-+	old_regs = set_irq_regs(fp);
-+	kstat_cpu(0).irqs[vec]++;
-+
-+	node = irq_list[vec];
-+	if (!node)
-+		handle_badint(fp);
-+	else {
-+		do {
-+			node->handler(vec, node->dev_id);
-+			node = node->next;
-+		} while (node);
-+	}
-+
-+	set_irq_regs(old_regs);
-+}
-+
-+/*
-+ * show_interrupts( struct seq_file *p, void *v)
-+ *
-+ * Called to show all the current interrupt information.
-+ */
-+int show_interrupts(struct seq_file *p, void *v)
-+{
-+	struct irq_controller *contr;
-+	struct irq_node *node;
-+	int i = *(loff_t *) v;
-+
-+	if ((i < NR_IRQS) && (irq_list[i])) {
-+		contr = irq_controller[i];
-+		node = irq_list[i];
-+		seq_printf(p, "%-8s %3u: %10u %s", contr->name, i,
-+			kstat_cpu(0).irqs[i], node->devname);
-+		while ((node = node->next))
-+			seq_printf(p, ", %s", node->devname);
-+
-+		seq_printf(p, "\n");
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * get_irq_node(void)
-+ *
-+ * Get an irq node from the pool.
-+ */
-+struct irq_node *get_irq_node(void)
-+{
-+	struct irq_node *p = pool;
-+	int i;
-+
-+	for (i = 0; i < POOL_SIZE; i++, p++) {
-+		if (!p->handler) {
-+			memset(p, 0, sizeof(struct irq_node));
-+			return p;
-+		}
-+	}
-+	printk(KERN_INFO "%s(%s:%d): No more irq nodes, I suggest you \
-+		increase POOL_SIZE", __FUNCTION__, __FILE__, __LINE__);
-+	return NULL;
-+}
-+
-+void init_irq_proc(void)
-+{
-+	/* Insert /proc/irq driver here */
-+}
-+
-+int setup_irq(unsigned int irq, struct irq_node *node)
-+{
-+	struct irq_controller *contr;
-+	struct irq_node **prev;
-+	unsigned long flags;
-+
-+	if (irq >= NR_IRQS || !irq_controller[irq]) {
-+		printk("%s: Incorrect IRQ %d from %s\n",
-+		       __FUNCTION__, irq, node->devname);
-+		return -ENXIO;
-+	}
-+
-+	contr = irq_controller[irq];
-+	spin_lock_irqsave(&contr->lock, flags);
-+
-+	prev = irq_list + irq;
-+	if (*prev) {
-+		/* Can't share interrupts unless both agree to */
-+		if (!((*prev)->flags & node->flags & IRQF_SHARED)) {
-+			spin_unlock_irqrestore(&contr->lock, flags);
-+			printk(KERN_INFO "%s: -BUSY-Incorrect IRQ %d \n",
-+				__FUNCTION__, irq);
-+			return -EBUSY;
-+		}
-+		while (*prev)
-+			prev = &(*prev)->next;
-+	}
-+
-+	if (!irq_list[irq]) {
-+		if (contr->startup)
-+			contr->startup(irq);
-+		else
-+			contr->enable(irq);
-+	}
-+	node->next = NULL;
-+	*prev = node;
-+
-+	spin_unlock_irqrestore(&contr->lock, flags);
-+
-+	return 0;
-+}
-+
-+int request_irq(unsigned int irq,
-+		irq_handler_t handler,
-+		unsigned long flags, const char *devname, void *dev_id)
-+{
-+	struct irq_node *node = get_irq_node();
-+	int res;
-+
-+	if (!node) {
-+		printk(KERN_INFO "%s:get_irq_node error %x\n",
-+			__FUNCTION__,(unsigned int) node);
-+		return -ENOMEM;
-+	}
-+	node->handler = handler;
-+	node->flags   = flags;
-+	node->dev_id  = dev_id;
-+	node->devname = devname;
-+
-+	res = setup_irq(irq, node);
-+	if (res)
-+		node->handler = NULL;
-+
-+	return res;
-+}
-+EXPORT_SYMBOL(request_irq);
-+
-+void free_irq(unsigned int irq, void *dev_id)
-+{
-+	struct irq_controller *contr;
-+	struct irq_node **p, *node;
-+	unsigned long flags;
-+
-+	if (irq >= NR_IRQS || !irq_controller[irq]) {
-+		printk(KERN_DEBUG "%s: Incorrect IRQ %d\n", __FUNCTION__, irq);
-+		return;
-+	}
-+
-+	contr = irq_controller[irq];
-+	spin_lock_irqsave(&contr->lock, flags);
-+
-+	p = irq_list + irq;
-+	while ((node = *p)) {
-+		if (node->dev_id == dev_id)
-+			break;
-+		p = &node->next;
-+	}
-+
-+	if (node) {
-+		*p = node->next;
-+		node->handler = NULL;
-+	} else
-+		printk(KERN_DEBUG "%s: Removing probably wrong IRQ %d\n",
-+		       __FUNCTION__, irq);
-+
-+	if (!irq_list[irq]) {
-+		if (contr->shutdown)
-+			contr->shutdown(irq);
-+		else
-+			contr->disable(irq);
-+	}
-+
-+	spin_unlock_irqrestore(&contr->lock, flags);
-+}
-+EXPORT_SYMBOL(free_irq);
-+
-+void enable_irq(unsigned int irq)
-+{
-+	struct irq_controller *contr;
-+	unsigned long flags;
-+
-+	if (irq >= NR_IRQS || !irq_controller[irq]) {
-+		printk(KERN_DEBUG "%s: Incorrect IRQ %d\n", __FUNCTION__, irq);
-+		return;
-+	}
-+
-+	contr = irq_controller[irq];
-+	spin_lock_irqsave(&contr->lock, flags);
-+	if (irq_depth[irq]) {
-+		if (!--irq_depth[irq]) {
-+			if (contr->enable)
-+				contr->enable(irq);
-+		}
-+	} else
-+		WARN_ON(1);
-+	spin_unlock_irqrestore(&contr->lock, flags);
-+}
-+EXPORT_SYMBOL(enable_irq);
-+
-+void disable_irq(unsigned int irq)
-+{
-+	struct irq_controller *contr;
-+	unsigned long flags;
-+
-+	if (irq >= NR_IRQS || !irq_controller[irq]) {
-+		printk(KERN_DEBUG "%s: Incorrect IRQ %d\n", __FUNCTION__, irq);
-+		return;
-+	}
-+
-+	contr = irq_controller[irq];
-+	spin_lock_irqsave(&contr->lock, flags);
-+	if (!irq_depth[irq]++) {
-+		if (contr->disable)
-+			contr->disable(irq);
-+	}
-+	spin_unlock_irqrestore(&contr->lock, flags);
-+}
-+EXPORT_SYMBOL(disable_irq);
-+
-+void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq")));
-+EXPORT_SYMBOL(disable_irq_nosync);
-+
-+
-+unsigned long probe_irq_on(void)
-+{
-+	return 0;
-+}
-+EXPORT_SYMBOL(probe_irq_on);
-+
-+int probe_irq_off(unsigned long irqs)
-+{
-+	return 0;
-+}
-+EXPORT_SYMBOL(probe_irq_off);
-+
-+asmlinkage void handle_badint(struct pt_regs *regs)
-+{
-+	kstat_cpu(0).irqs[0]++;
-+	num_spurious++;
-+	printk(KERN_DEBUG "unexpected interrupt from %u\n", regs->vector);
-+}
-+EXPORT_SYMBOL(handle_badint);
-+
-+#ifdef CONFIG_M5445X
-+/*
-+ * M5445X Implementation
-+ */
-+void m5445x_irq_enable(unsigned int irq)
-+{
-+	/* enable the interrupt hardware */
-+	if (irq < 64)
-+		return;
-+
-+	/* adjust past non-hardware ints */
-+	irq -= 64;
-+
-+	/* check for eport */
-+	if ((irq > 0) && (irq < 8)) {
-+		/* enable eport */
-+		MCF_EPORT_EPPAR &= ~(3 << (irq*2));	/* level */
-+		MCF_EPORT_EPDDR &= ~(1 << irq);		/* input */
-+		MCF_EPORT_EPIER |= 1 << irq;		/* irq enabled */
-+	}
-+
-+	if (irq < 64) {
-+		/* controller 0 */
-+		MCF_INTC0_ICR(irq) = 0x02;
-+		MCF_INTC0_CIMR = irq;
-+	} else {
-+		/* controller 1 */
-+		irq -= 64;
-+		MCF_INTC1_ICR(irq) = 0x02;
-+		MCF_INTC1_CIMR = irq;
-+	}
-+}
-+
-+void m5445x_irq_disable(unsigned int irq)
-+{
-+	/* disable the interrupt hardware */
-+	if (irq < 64)
-+		return;
-+
-+	/* adjust past non-hardware ints */
-+	irq -= 64;
-+
-+	/* check for eport */
-+	if ((irq > 0) && (irq < 8)) {
-+		/* disable eport */
-+		MCF_EPORT_EPIER &= ~(1 << irq);
-+	}
-+
-+	if (irq < 64) {
-+		/* controller 0 */
-+		MCF_INTC0_ICR(irq) = 0x00;
-+		MCF_INTC0_SIMR = irq;
-+	} else {
-+		/* controller 1 */
-+		irq -= 64;
-+		MCF_INTC1_ICR(irq) = 0x00;
-+		MCF_INTC1_SIMR = irq;
-+	}
-+}
-+#elif defined(CONFIG_M547X_8X)
-+/*
-+ * M547X_8X Implementation
-+ */
-+void m547x_8x_irq_enable(unsigned int irq)
-+{
-+	/* enable the interrupt hardware */
-+	if (irq < 64)
-+		return;
-+
-+	/* adjust past non-hardware ints */
-+	irq -= 64;
-+
-+/* JKM -- re-add EPORT later */
-+#if 0
-+	/* check for eport */
-+	if ((irq > 0) && (irq < 8)) {
-+		/* enable eport */
-+		MCF_EPORT_EPPAR &= ~(3 << (irq*2));	/* level */
-+		MCF_EPORT_EPDDR &= ~(1 << irq);		/* input */
-+		MCF_EPORT_EPIER |= 1 << irq;		/* irq enabled */
-+	}
-+#endif
-+
-+	if (irq < 32) {
-+		/* *grumble* don't set low bit of IMRL */
-+		MCF_IMRL &= (~(1 << irq) & 0xfffffffe);
-+	}
-+	else {
-+		MCF_IMRH &= ~(1 << (irq - 32));
-+	}
-+}
-+
-+void m547x_8x_irq_disable(unsigned int irq)
-+{
-+	/* disable the interrupt hardware */
-+	if (irq < 64)
-+		return;
-+
-+	/* adjust past non-hardware ints */
-+	irq -= 64;
-+
-+/* JKM -- re-add EPORT later */
-+#if 0
-+	/* check for eport */
-+	if ((irq > 0) && (irq < 8)) {
-+		/* disable eport */
-+		MCF_EPORT_EPIER &= ~(1 << irq);
-+	}
-+#endif
-+
-+	if (irq < 32)
-+		MCF_IMRL |= (1 << irq);
-+	else
-+		MCF_IMRH |= (1 << (irq - 32));
-+}
-+#endif
---- /dev/null
-+++ b/arch/m68k/coldfire/iomap.c
-@@ -0,0 +1,56 @@
-+/*
-+ * arch/m68k/coldfire/iomap.c
-+ *
-+ * Generic coldfire iomap interface
-+ *
-+ * Based on the sh64 iomap.c by Paul Mundt.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ */
-+#include <linux/pci.h>
-+#include <asm/io.h>
-+
-+#if 0
-+void __iomem *__attribute__ ((weak))
-+ioport_map(unsigned long port, unsigned int len)
-+{
-+	return (void __iomem *)port;
-+}
-+EXPORT_SYMBOL(pci_iomap);
-+
-+void ioport_unmap(void __iomem *addr)
-+{
-+	/* Nothing .. */
-+}
-+EXPORT_SYMBOL(pci_iounmap);
-+
-+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
-+{
-+	unsigned long start = pci_resource_start(dev, bar);
-+	unsigned long len = pci_resource_len(dev, bar);
-+	unsigned long flags = pci_resource_flags(dev, bar);
-+printk(KERN_INFO "PCI_IOMAP: BAR=%d  START=0x%lx  LEN=0x%lx  FLAGS=0x%lx\n",
-+       bar, start, len, flags);
-+
-+	if (!len)
-+		return NULL;
-+	if (max && len > max)
-+		len = max;
-+	if (flags & IORESOURCE_IO)
-+		return ioport_map(start, len);
-+	if (flags & IORESOURCE_MEM)
-+		return (void __iomem *)start;
-+
-+	/* What? */
-+	return NULL;
-+}
-+EXPORT_SYMBOL(ioport_map);
-+
-+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-+{
-+	/* Nothing .. */
-+}
-+EXPORT_SYMBOL(ioport_unmap);
-+#endif
---- /dev/null
-+++ b/arch/m68k/coldfire/m547x_8x-devices.c
-@@ -0,0 +1,163 @@
-+/*
-+ * arch/m68k/coldfire/m547x_8x-devices.c
-+ *
-+ * Coldfire M547x/M548x Platform Device Configuration
-+ *
-+ * Copyright (c) 2008 Freescale Semiconductor, Inc.
-+ *	Kurt Mahan <kmahan@freescale.com>
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/spi/spi.h>
-+
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+#include <asm/mcfqspi.h>
-+
-+
-+#ifdef CONFIG_SPI
-+/*
-+ *
-+ * DSPI
-+ *
-+ */
-+
-+/* number of supported SPI selects */
-+#define SPI_NUM_CHIPSELECTS	8
-+
-+void coldfire_spi_cs_control(u8 cs, u8 command)
-+{
-+	/* nothing special required */
-+}
-+
-+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-+static struct coldfire_spi_chip spidev_chip_info = {
-+	.bits_per_word = 8,
-+};
-+#endif
-+
-+static struct spi_board_info spi_board_info[] = {
-+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-+	{
-+		.modalias = "spidev",
-+		.max_speed_hz = 16000000,  	/* max clk (SCK) speed in HZ */
-+		.bus_num = 1,
-+		.chip_select = 0,		/* CS0 */
-+		.controller_data = &spidev_chip_info,
-+ 	}
-+#endif
-+};
-+
-+static int spi_irq_list[] = {
-+	/* IRQ, 	     ICR Offset, 	ICR Val,Mask */
-+	64 + ISC_DSPI_OVRFW, ISC_DSPI_OVRFW,	0x18, 	0,
-+	64 + ISC_DSPI_RFOF,  ISC_DSPI_RFOF,	0x18, 	0,
-+	64 + ISC_DSPI_RFDF,  ISC_DSPI_RFDF,	0x18, 	0,
-+	64 + ISC_DSPI_TFUF,  ISC_DSPI_TFUF,	0x18, 	0,
-+	64 + ISC_DSPI_TCF,   ISC_DSPI_TCF,	0x18, 	0,
-+	64 + ISC_DSPI_TFFF,  ISC_DSPI_TFFF,	0x18, 	0,
-+	64 + ISC_DSPI_EOQF,  ISC_DSPI_EOQF,	0x18, 	0,
-+	0,0,0,0,
-+};
-+
-+static struct coldfire_spi_master coldfire_master_info = {
-+	.bus_num = 1,
-+	.num_chipselect = SPI_NUM_CHIPSELECTS,
-+	.irq_list = spi_irq_list,
-+	.irq_source = 0,	/* not used */
-+	.irq_vector = 0,	/* not used */
-+	.irq_mask = 0,		/* not used */
-+	.irq_lp = 0,		/* not used */
-+	.par_val = 0,		/* not used */
-+	.cs_control = coldfire_spi_cs_control,
-+};
-+
-+static struct resource coldfire_spi_resources[] = {
-+	[0] = {
-+		.name = "spi-par",
-+		.start = MCF_MBAR + 0x00000a50,	/* PAR_DSPI */
-+		.end = MCF_MBAR + 0x00000a50,	/* PAR_DSPI */
-+		.flags = IORESOURCE_MEM
-+	},
-+
-+	[1] = {
-+		.name = "spi-module",
-+		.start = MCF_MBAR + 0x00008a00,	/* DSPI MCR Base */
-+		.end = MCF_MBAR + 0x00008ab8,	/* DSPI mem map end */
-+		.flags = IORESOURCE_MEM
-+	},
-+
-+	[2] = {
-+		.name = "spi-int-level",
-+		.start = MCF_MBAR + 0x740,		 /* ICR start */
-+		.end = MCF_MBAR + 0x740 + ISC_DSPI_EOQF, /* ICR end */
-+		.flags = IORESOURCE_MEM
-+	},
-+
-+	[3] = {
-+		.name = "spi-int-mask",
-+		.start = MCF_MBAR + 0x70c,	/* IMRL */
-+		.end = MCF_MBAR + 0x70c,	/* IMRL */
-+		.flags = IORESOURCE_MEM
-+	}
-+};
-+
-+static struct platform_device coldfire_spi = {
-+	.name = "spi_coldfire",
-+	.id = -1,
-+	.resource = coldfire_spi_resources,
-+	.num_resources = ARRAY_SIZE(coldfire_spi_resources),
-+	.dev = {
-+		.platform_data = &coldfire_master_info,
-+	}
-+};
-+
-+/**
-+ * m547x_8x_spi_init - Initialize SPI
-+ */
-+static int __init m547x_8x_spi_init(void)
-+{
-+	int retval;
-+
-+	/* initialize the DSPI PAR */
-+	MCF_GPIO_PAR_DSPI = (MCF_GPIO_PAR_DSPI_PAR_CS5 |
-+			     MCF_GPIO_PAR_DSPI_PAR_CS3_DSPICS |
-+			     MCF_GPIO_PAR_DSPI_PAR_CS2_DSPICS |
-+			     MCF_GPIO_PAR_DSPI_PAR_CS0_DSPICS |
-+			     MCF_GPIO_PAR_DSPI_PAR_SCK_SCK |
-+			     MCF_GPIO_PAR_DSPI_PAR_SIN_SIN |
-+			     MCF_GPIO_PAR_DSPI_PAR_SOUT_SOUT);
-+
-+	/* register device */
-+	retval = platform_device_register(&coldfire_spi);
-+	if (retval < 0) {
-+		goto out;
-+	}
-+
-+	/* register board info */
-+	if (ARRAY_SIZE(spi_board_info))
-+		retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-+
-+out:
-+	return retval;
-+}
-+#endif
-+
-+
-+/**
-+ * m547x_8x_init_devices - Initialize M547X_8X devices
-+ *
-+ * Returns 0 on success.
-+ */
-+static int __init m547x_8x_init_devices(void)
-+{
-+#ifdef CONFIG_SPI
-+	m547x_8x_spi_init();
-+#endif
-+
-+	return 0;
-+}
-+arch_initcall(m547x_8x_init_devices);
---- /dev/null
-+++ b/arch/m68k/coldfire/m547x_8x-dma.c
-@@ -0,0 +1,516 @@
-+/*
-+ * arch/m68k/coldfire/m547x_8x-dma.c
-+ *
-+ * Coldfire M547x/M548x DMA
-+ *
-+ * Copyright (c) 2008 Freescale Semiconductor, Inc.
-+ *	Kurt Mahan <kmahan@freescale.com>
-+ *
-+ * This code is based on patches from the Freescale M547x_8x BSP
-+ * release mcf547x_8x-20070107-ltib.iso
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/mm.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/dma.h>
-+#include <asm/coldfire.h>
-+#include <asm/m5485sram.h>
-+#include <asm/mcfsim.h>
-+
-+/*
-+ * This global keeps track of which initiators have been
-+ * used of the available assignments.  Initiators 0-15 are
-+ * hardwired.  Initiators 16-31 are multiplexed and controlled
-+ * via the Initiatior Mux Control Registe (IMCR).  The
-+ * assigned requestor is stored with the associated initiator
-+ * number.
-+ */
-+static int used_reqs[32] = {
-+	DMA_ALWAYS, DMA_DSPI_RX, DMA_DSPI_TX, DMA_DREQ0,
-+	DMA_PSC0_RX, DMA_PSC0_TX, DMA_USBEP0, DMA_USBEP1,
-+	DMA_USBEP2, DMA_USBEP3, DMA_PCI_TX, DMA_PCI_RX,
-+	DMA_PSC1_RX, DMA_PSC1_TX, DMA_I2C_RX, DMA_I2C_TX,
-+	0, 0, 0, 0,
-+	0, 0, 0, 0,
-+	0, 0, 0, 0,
-+	0, 0, 0, 0
-+};
-+
-+/*
-+ * This global keeps track of which channels have been assigned
-+ * to tasks.  This methology assumes that no single initiator
-+ * will be tied to more than one task/channel
-+ */
-+static char used_channel[16] = {
-+	-1, -1, -1, -1, -1, -1, -1, -1,
-+	-1, -1, -1, -1, -1, -1, -1, -1
-+};
-+
-+unsigned int connected_channel[16] = {
-+	0, 0, 0, 0, 0, 0, 0, 0,
-+	0, 0, 0, 0, 0, 0, 0, 0
-+};
-+
-+/**
-+ * dma_set_initiator - enable initiator
-+ * @initiator: initiator identifier
-+ *
-+ * Returns 0 of successful, non-zero otherwise
-+ *
-+ * Attempt to enable the provided Initiator in the Initiator
-+ * Mux Control Register.
-+ */
-+int dma_set_initiator(int initiator)
-+{
-+	switch (initiator) {
-+	case DMA_ALWAYS:
-+	case DMA_DSPI_RX:
-+	case DMA_DSPI_TX:
-+	case DMA_DREQ0:
-+	case DMA_PSC0_RX:
-+	case DMA_PSC0_TX:
-+	case DMA_USBEP0:
-+	case DMA_USBEP1:
-+	case DMA_USBEP2:
-+	case DMA_USBEP3:
-+	case DMA_PCI_TX:
-+	case DMA_PCI_RX:
-+	case DMA_PSC1_RX:
-+	case DMA_PSC1_TX:
-+	case DMA_I2C_RX:
-+	case DMA_I2C_TX:
-+		/*
-+		 * These initiators are always active
-+		 */
-+		break;
-+
-+	case DMA_FEC0_RX:
-+		MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC16(3))
-+		    | MCF_DMA_IMCR_SRC16_FEC0RX;
-+		used_reqs[16] = DMA_FEC0_RX;
-+		break;
-+
-+	case DMA_FEC0_TX:
-+		MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC17(3))
-+		    | MCF_DMA_IMCR_SRC17_FEC0TX;
-+		used_reqs[17] = DMA_FEC0_TX;
-+		break;
-+
-+	case DMA_FEC1_RX:
-+		MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC20(3))
-+		    | MCF_DMA_IMCR_SRC20_FEC1RX;
-+		used_reqs[20] = DMA_FEC1_RX;
-+		break;
-+
-+	case DMA_FEC1_TX:
-+		if (used_reqs[21] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC21(3))
-+			    | MCF_DMA_IMCR_SRC21_FEC1TX;
-+			used_reqs[21] = DMA_FEC1_TX;
-+		} else if (used_reqs[25] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC25(3))
-+			    | MCF_DMA_IMCR_SRC25_FEC1TX;
-+			used_reqs[25] = DMA_FEC1_TX;
-+		} else if (used_reqs[31] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3))
-+			    | MCF_DMA_IMCR_SRC31_FEC1TX;
-+			used_reqs[31] = DMA_FEC1_TX;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_DREQ1:
-+		if (used_reqs[29] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3))
-+			    | MCF_DMA_IMCR_SRC29_DREQ1;
-+			used_reqs[29] = DMA_DREQ1;
-+		} else if (used_reqs[21] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC21(3))
-+			    | MCF_DMA_IMCR_SRC21_DREQ1;
-+			used_reqs[21] = DMA_DREQ1;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_CTM0:
-+		if (used_reqs[24] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC24(3))
-+			    | MCF_DMA_IMCR_SRC24_CTM0;
-+			used_reqs[24] = DMA_CTM0;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_CTM1:
-+		if (used_reqs[25] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC25(3))
-+			    | MCF_DMA_IMCR_SRC25_CTM1;
-+			used_reqs[25] = DMA_CTM1;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_CTM2:
-+		if (used_reqs[26] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC26(3))
-+			    | MCF_DMA_IMCR_SRC26_CTM2;
-+			used_reqs[26] = DMA_CTM2;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_CTM3:
-+		if (used_reqs[27] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC27(3))
-+			    | MCF_DMA_IMCR_SRC27_CTM3;
-+			used_reqs[27] = DMA_CTM3;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_CTM4:
-+		if (used_reqs[28] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3))
-+			    | MCF_DMA_IMCR_SRC28_CTM4;
-+			used_reqs[28] = DMA_CTM4;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_CTM5:
-+		if (used_reqs[29] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3))
-+			    | MCF_DMA_IMCR_SRC29_CTM5;
-+			used_reqs[29] = DMA_CTM5;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_CTM6:
-+		if (used_reqs[30] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC30(3))
-+			    | MCF_DMA_IMCR_SRC30_CTM6;
-+			used_reqs[30] = DMA_CTM6;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_CTM7:
-+		if (used_reqs[31] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3))
-+			    | MCF_DMA_IMCR_SRC31_CTM7;
-+			used_reqs[31] = DMA_CTM7;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_USBEP4:
-+		if (used_reqs[26] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC26(3))
-+			    | MCF_DMA_IMCR_SRC26_USBEP4;
-+			used_reqs[26] = DMA_USBEP4;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_USBEP5:
-+		if (used_reqs[27] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC27(3))
-+			    | MCF_DMA_IMCR_SRC27_USBEP5;
-+			used_reqs[27] = DMA_USBEP5;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_USBEP6:
-+		if (used_reqs[28] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3))
-+			    | MCF_DMA_IMCR_SRC28_USBEP6;
-+			used_reqs[28] = DMA_USBEP6;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_PSC2_RX:
-+		if (used_reqs[28] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3))
-+			    | MCF_DMA_IMCR_SRC28_PSC2RX;
-+			used_reqs[28] = DMA_PSC2_RX;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_PSC2_TX:
-+		if (used_reqs[29] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3))
-+			    | MCF_DMA_IMCR_SRC29_PSC2TX;
-+			used_reqs[29] = DMA_PSC2_TX;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_PSC3_RX:
-+		if (used_reqs[30] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC30(3))
-+			    | MCF_DMA_IMCR_SRC30_PSC3RX;
-+			used_reqs[30] = DMA_PSC3_RX;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	case DMA_PSC3_TX:
-+		if (used_reqs[31] == 0) {
-+			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3))
-+			    | MCF_DMA_IMCR_SRC31_PSC3TX;
-+			used_reqs[31] = DMA_PSC3_TX;
-+		} else		/* No empty slots */
-+			return 1;
-+		break;
-+
-+	default:
-+		return 1;
-+	}
-+	return 0;
-+}
-+
-+/**
-+ * dma_get_initiator - get the initiator for the given requestor
-+ * @requestor: initiator identifier
-+ *
-+ * Returns initiator number (0-31) if assigned or just 0
-+ */
-+unsigned int dma_get_initiator(int requestor)
-+{
-+	u32 i;
-+
-+	for (i = 0; i < sizeof(used_reqs); ++i) {
-+		if (used_reqs[i] == requestor)
-+			return i;
-+	}
-+	return 0;
-+}
-+
-+/**
-+ * dma_remove_initiator - remove the given initiator from active list
-+ * @requestor: requestor to remove
-+ */
-+void dma_remove_initiator(int requestor)
-+{
-+	u32 i;
-+
-+	for (i = 0; i < sizeof(used_reqs); ++i) {
-+		if (used_reqs[i] == requestor) {
-+			used_reqs[i] = -1;
-+			break;
-+		}
-+	}
-+}
-+
-+/**
-+ * dma_set_channel_fec: find available channel for fec and mark
-+ * @requestor: initiator/requestor identifier
-+ *
-+ * Returns first avaialble channel (0-5) or -1 if all occupied
-+ */
-+int dma_set_channel_fec(int requestor)
-+{
-+	u32 i, t;
-+
-+#ifdef CONFIG_FEC_548x_ENABLE_FEC2
-+	t = 4;
-+#else
-+	t = 2;
-+#endif
-+
-+	for (i = 0; i < t ; ++i) {
-+		if (used_channel[i] == -1) {
-+			used_channel[i] = requestor;
-+			return i;
-+		}
-+	}
-+	/* All channels taken */
-+	return -1;
-+}
-+
-+/**
-+ * dma_set_channel - find an available channel and mark as used
-+ * @requestor: initiator/requestor identifier
-+ *
-+ * Returns first available channel (6-15) or -1 if all occupied
-+ */
-+int dma_set_channel(int requestor)
-+{
-+	u32 i;
-+#ifdef CONFIG_NET_FEC2
-+	i = 4;
-+#else
-+	i = 2;
-+#endif
-+
-+	for (; i < 16; ++i)
-+		if (used_channel[i] == -1) {
-+			used_channel[i] = requestor;
-+			return i;
-+		}
-+
-+	/* All channels taken */
-+	return -1;
-+}
-+
-+/**
-+ * dma_get_channel - get the channel being initiated by the requestor
-+ * @requestor: initiator/requestor identifier
-+ *
-+ * Returns Initiator for requestor or -1 if not found
-+ */
-+int dma_get_channel(int requestor)
-+{
-+	u32 i;
-+
-+	for (i = 0; i < sizeof(used_channel); ++i) {
-+		if (used_channel[i] == requestor)
-+			return i;
-+	}
-+	return -1;
-+}
-+
-+/**
-+ * dma_connect - connect a channel with reference on data
-+ * @channel: channel number
-+ * @address: reference address of data
-+ *
-+ * Returns 0 if success or -1 if invalid channel
-+ */
-+int dma_connect(int channel, int address)
-+{
-+	if ((channel < 16) && (channel >= 0)) {
-+		connected_channel[channel] = address;
-+		return 0;
-+	}
-+	return -1;
-+}
-+
-+/**
-+ * dma_disconnect - disconnect a channel
-+ * @channel: channel number
-+ *
-+ * Returns 0 if success or -1 if invalid channel
-+ */
-+int dma_disconnect(int channel)
-+{
-+	if ((channel < 16) && (channel >= 0)) {
-+		connected_channel[channel] = 0;
-+		return 0;
-+	}
-+	return -1;
-+}
-+
-+/**
-+ * dma_remove_channel - remove channel from the active list
-+ * @requestor: initiator/requestor identifier
-+ */
-+void dma_remove_channel(int requestor)
-+{
-+	u32 i;
-+
-+	for (i = 0; i < sizeof(used_channel); ++i) {
-+		if (used_channel[i] == requestor) {
-+			used_channel[i] = -1;
-+			break;
-+		}
-+	}
-+}
-+
-+/**
-+ * dma_interrupt_handler - dma interrupt handler
-+ * @irq: interrupt number
-+ * @dev_id: data
-+ *
-+ * Returns IRQ_HANDLED
-+ */
-+irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
-+{
-+	u32 i, interrupts;
-+
-+	/*
-+	 * Determine which interrupt(s) triggered by AND'ing the
-+	 * pending interrupts with those that aren't masked.
-+	 */
-+	interrupts = MCF_DMA_DIPR;
-+	MCF_DMA_DIPR = interrupts;
-+
-+	for (i = 0; i < 16; ++i, interrupts >>= 1) {
-+		if (interrupts & 0x1)
-+			if (connected_channel[i] != 0)
-+				((void (*)(void)) (connected_channel[i])) ();
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/**
-+ * dma_remove_channel_by_number - clear dma channel
-+ * @channel: channel number to clear
-+ */
-+void dma_remove_channel_by_number(int channel)
-+{
-+	if ((channel < sizeof(used_channel)) && (channel >= 0))
-+		used_channel[channel] = -1;
-+}
-+
-+/**
-+ * dma_init - initialize the dma subsystem
-+ *
-+ * Returns 0 if success non-zero if failure
-+ *
-+ * Handles the DMA initialization during device setup.
-+ */
-+int __devinit dma_init()
-+{
-+	int result;
-+	char *dma_version_str;
-+
-+	MCD_getVersion(&dma_version_str);
-+	printk(KERN_INFO "m547x_8x DMA: Initialize %s\n", dma_version_str);
-+
-+	/* attempt to setup dma interrupt handler */
-+	if (request_irq(64 + ISC_DMA, dma_interrupt_handler, IRQF_DISABLED,
-+			"MCD-DMA", NULL)) {
-+		printk(KERN_ERR "MCD-DMA: Cannot allocate the DMA IRQ(48)\n");
-+		return 1;
-+	}
-+
-+	MCF_DMA_DIMR = 0;
-+	MCF_DMA_DIPR = 0xFFFFFFFF;
-+
-+	MCF_ICR(ISC_DMA) = ILP_DMA;
-+
-+	result = MCD_initDma((dmaRegs *) (MCF_MBAR + 0x8000),
-+			(void *) SYS_SRAM_DMA_START, MCD_RELOC_TASKS);
-+	if (result != MCD_OK) {
-+		printk(KERN_ERR "MCD-DMA: Cannot perform DMA initialization\n");
-+		free_irq(64 + ISC_DMA, NULL);
-+		return 1;
-+	}
-+
-+	return 0;
-+}
-+device_initcall(dma_init);
---- /dev/null
-+++ b/arch/m68k/coldfire/Makefile
-@@ -0,0 +1,20 @@
-+#
-+# Makefile for Linux arch/m68k/coldfire source directory
-+#
-+
-+obj-y:= entry.o config.o cache.o signal.o muldi3.o traps.o ints.o
-+ifdef CONFIG_M5445X
-+ifneq ($(strip $(CONFIG_USB) $(CONFIG_USB_GADGET_MCF5445X)),)
-+	obj-y	+= usb.o usb/
-+endif
-+endif
-+
-+ifdef CONFIG_M547X_8X
-+obj-$(CONFIG_PCI)       += mcf548x-pci.o
-+else
-+obj-$(CONFIG_PCI)	+= pci.o mcf5445x-pci.o iomap.o
-+endif
-+obj-$(CONFIG_M5445X)	+= mcf5445x-devices.o
-+obj-$(CONFIG_M547X_8X)	+= m547x_8x-devices.o
-+obj-$(CONFIG_M547X_8X)	+= mcf548x-devices.o
-+obj-$(CONFIG_MCD_DMA)	+= m547x_8x-dma.o
---- /dev/null
-+++ b/arch/m68k/coldfire/mcf5445x-devices.c
-@@ -0,0 +1,136 @@
-+/*
-+ * arch/m68k/coldfire/mcf5445x-devices.c
-+ *
-+ * Coldfire M5445x Platform Device Configuration
-+ *
-+ * Based on the Freescale MXC devices.c
-+ *
-+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *	Kurt Mahan <kmahan@freescale.com>
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+
-+/* ATA Interrupt */
-+#define IRQ_ATA		(64 + 64 + 54)
-+
-+/* ATA Base */
-+#define	BASE_IO_ATA	0x90000000
-+
-+#define ATA_IER		MCF_REG08(BASE_IO_ATA+0x2c)	/* int enable reg */
-+#define ATA_ICR		MCF_REG08(BASE_IO_ATA+0x30)	/* int clear reg */
-+
-+/*
-+ * On-chip PATA
-+ */
-+#if defined(CONFIG_PATA_FSL) || defined(CONFIG_PATA_FSL_MODULE)
-+static int ata_init(struct platform_device *pdev)
-+{
-+	/* clear ints */
-+	ATA_IER = 0x00;
-+	ATA_ICR = 0xff;
-+
-+	/* setup shared pins */
-+	MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC & MCF_GPIO_PAR_FEC_FEC1_MASK) |
-+			   MCF_GPIO_PAR_FEC_FEC1_ATA;
-+
-+	MCF_GPIO_PAR_FECI2C = (MCF_GPIO_PAR_FECI2C &
-+	  		      (MCF_GPIO_PAR_FECI2C_MDC1_MASK &
-+			      MCF_GPIO_PAR_FECI2C_MDIO1_MASK)) |
-+	  		      MCF_GPIO_PAR_FECI2C_MDC1_ATA_DIOR |
-+	  		      MCF_GPIO_PAR_FECI2C_MDIO1_ATA_DIOW;
-+
-+	MCF_GPIO_PAR_ATA = MCF_GPIO_PAR_ATA_BUFEN |
-+			   MCF_GPIO_PAR_ATA_CS1 |
-+			   MCF_GPIO_PAR_ATA_CS0 |
-+			   MCF_GPIO_PAR_ATA_DA2 |
-+			   MCF_GPIO_PAR_ATA_DA1 |
-+			   MCF_GPIO_PAR_ATA_DA0 |
-+			   MCF_GPIO_PAR_ATA_RESET_RESET |
-+			   MCF_GPIO_PAR_ATA_DMARQ_DMARQ |
-+			   MCF_GPIO_PAR_ATA_IORDY_IORDY;
-+
-+	MCF_GPIO_PAR_PCI = (MCF_GPIO_PAR_PCI &
-+			     (MCF_GPIO_PAR_PCI_GNT3_MASK &
-+			      MCF_GPIO_PAR_PCI_REQ3_MASK)) |
-+			   MCF_GPIO_PAR_PCI_GNT3_ATA_DMACK |
-+			   MCF_GPIO_PAR_PCI_REQ3_ATA_INTRQ;
-+
-+	return 0;
-+}
-+
-+static void ata_exit(void)
-+{
-+	printk(KERN_INFO "** ata_exit\n");
-+}
-+
-+static int ata_get_clk_rate(void)
-+{
-+	return MCF_BUSCLK;
-+}
-+
-+/* JKM -- move these to a header file */
-+#define MCF_IDE_DMA_WATERMARK	32	/* DMA watermark level in bytes */
-+#define MCF_IDE_DMA_BD_NR	(512/3/4) /* number of BDs per channel */
-+
-+static struct fsl_ata_platform_data ata_data = {
-+	.init             = ata_init,
-+	.exit             = ata_exit,
-+	.get_clk_rate     = ata_get_clk_rate,
-+#ifdef CONFIG_PATA_FSL_USE_DMA
-+        .udma_mask        = 0x0F, /* the board handles up to UDMA3 */
-+        .fifo_alarm       = MCF_IDE_DMA_WATERMARK / 2,
-+        .max_sg           = MCF_IDE_DMA_BD_NR,
-+#endif
-+};
-+
-+static struct resource pata_fsl_resources[] = {
-+	[0] = {		/* I/O */
-+		.start		= BASE_IO_ATA,
-+		.end		= BASE_IO_ATA + 0x000000d8,
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	[2] = {		/* IRQ */
-+		.start		= IRQ_ATA,
-+		.end		= IRQ_ATA,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device pata_fsl_device = {
-+	.name			= "pata_fsl",
-+	.id			= -1,
-+	.num_resources		= ARRAY_SIZE(pata_fsl_resources),
-+	.resource		= pata_fsl_resources,
-+	.dev			= {
-+		.platform_data	= &ata_data,
-+		.coherent_dma_mask = ~0,	/* $$$ REVISIT */
-+	},
-+};
-+
-+static inline void mcf5445x_init_pata(void)
-+{
-+	(void)platform_device_register(&pata_fsl_device);
-+}
-+#else
-+static inline void mcf5445x_init_pata(void)
-+{
-+}
-+#endif
-+
-+static int __init mcf5445x_init_devices(void)
-+{
-+	printk(KERN_INFO "MCF5445x INIT_DEVICES\n");
-+#if 0
-+	mcf5445x_init_pata();
-+#endif
-+
-+	return 0;
-+}
-+arch_initcall(mcf5445x_init_devices);
---- /dev/null
-+++ b/arch/m68k/coldfire/mcf5445x-pci.c
-@@ -0,0 +1,431 @@
-+/*
-+ * arch/m68k/coldfire/mcf5445x-pci.c
-+ *
-+ * Coldfire M5445x specific PCI implementation.
-+ *
-+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *	Kurt Mahan <kmahan@freescale.com>
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/pci.h>
-+
-+#include <asm/mcfsim.h>
-+#include <asm/pci.h>
-+#include <asm/irq.h>
-+
-+/*
-+ * Layout MCF5445x to PCI memory mappings:
-+ *
-+ *	WIN         MCF5445x                    PCI            TYPE
-+ *	---         --------                    ---            ----
-+ *	[0] 0xA0000000 -> 0xA7FFFFFF  0xA0000000 -> 0xA7FFFFFF  MEM
-+ *	[1] 0xA8000000 -> 0xABFFFFFF  0xA8000000 -> 0xABFFFFFF  MEM
-+ *	[2] 0xAC000000 -> 0xAFFFFFFF  0xAC000000 -> 0xAFFFFFFF  IO
-+ */
-+
-+#define MCF5445X_PCI_MEM_BASE		0xA0000000
-+#define MCF5445X_PCI_MEM_SIZE		0x0C000000
-+
-+#define MCF5445X_PCI_CONFIG_BASE	0xAC000000
-+#define MCF5445X_PCI_CONFIG_SIZE	0x04000000
-+
-+#define MCF5445X_PCI_IO_BASE		0xAC000000
-+#define MCF5445X_PCI_IO_SIZE		0x04000000
-+
-+/* PCI Bus memory resource block */
-+struct resource pci_iomem_resource = {
-+	.name = "PCI memory space",
-+	.start = MCF5445X_PCI_MEM_BASE,
-+	.flags = IORESOURCE_MEM,
-+	.end = MCF5445X_PCI_MEM_BASE + MCF5445X_PCI_MEM_SIZE - 1
-+};
-+
-+/* PCI Bus ioport resource block */
-+struct resource pci_ioport_resource = {
-+	.name = "PCI I/O space",
-+	.start = MCF5445X_PCI_IO_BASE,
-+	.flags = IORESOURCE_IO,
-+	.end = MCF5445X_PCI_IO_BASE + MCF5445X_PCI_IO_SIZE - 1
-+};
-+
-+/*
-+ * The M54455EVB multiplexes all the PCI interrupts via
-+ * the FPGA and routes them to a single interrupt.  The
-+ * PCI spec requires all PCI interrupt routines be smart
-+ * enough to sort out their own interrupts.
-+ * The interrupt source from the FPGA is configured
-+ * to EPORT 3.
-+ */
-+#define MCF5445X_PCI_IRQ		0x43
-+
-+#define PCI_SLOTS			4
-+
-+/*
-+ * FPGA Info
-+ */
-+#define FPGA_PCI_IRQ_ENABLE		(u32 *)0x09000000
-+#define FPGA_PCI_IRQ_STATUS		(u32 *)0x09000004
-+#define FPGA_PCI_IRQ_ROUTE 		(u32 *)0x0900000c
-+#define FPGA_SEVEN_LED			(u32 *)0x09000014
-+
-+extern void set_fpga(u32 *addr, u32 val);
-+
-+#ifdef DEBUG
-+void mcf5445x_pci_dumpregs(void);
-+#endif
-+
-+/*
-+ * mcf5445x_conf_device(struct pci_dev *dev)
-+ *
-+ * Machine dependent Configure the given device.
-+ *
-+ * Parameters:
-+ *
-+ * dev		- the pci device.
-+ */
-+void
-+mcf5445x_conf_device(struct pci_dev *dev)
-+{
-+	set_fpga(FPGA_PCI_IRQ_ENABLE, 0x0f);
-+}
-+
-+/*
-+ * int mcf5445x_pci_config_read(unsigned int seg, unsigned int bus,
-+ *			      	unsigned int devfn, int reg,
-+ *			      	u32 *value)
-+ *
-+ * Read from PCI configuration space.
-+ *
-+ */
-+int mcf5445x_pci_config_read(unsigned int seg, unsigned int bus,
-+			     unsigned int devfn, int reg, int len, u32 *value)
-+{
-+	u32 addr = MCF_PCI_PCICAR_BUSNUM(bus) |
-+		   MCF_PCI_PCICAR_DEVNUM(PCI_SLOT(devfn)) |
-+		   MCF_PCI_PCICAR_FUNCNUM(PCI_FUNC(devfn)) |
-+		   MCF_PCI_PCICAR_DWORD(reg) |
-+		   MCF_PCI_PCICAR_E;
-+
-+	if ((bus > 255) || (devfn > 255) || (reg > 255)) {
-+		*value = -1;
-+		return -EINVAL;
-+	}
-+
-+	/* setup for config mode */
-+	MCF_PCI_PCICAR = addr;
-+	__asm__ __volatile__("nop");
-+
-+	switch (len) {
-+	case 1:
-+		*value = *(volatile u8 *)(MCF5445X_PCI_CONFIG_BASE+(reg&3));
-+		break;
-+	case 2:
-+		*value = le16_to_cpu(*(volatile u16 *)
-+				(MCF5445X_PCI_CONFIG_BASE + (reg&2)));
-+		break;
-+	case 4:
-+		*value = le32_to_cpu(*(volatile u32 *)
-+				(MCF5445X_PCI_CONFIG_BASE));
-+		break;
-+	}
-+
-+	/* clear config mode */
-+	MCF_PCI_PCICAR = ~MCF_PCI_PCICAR_E;
-+	__asm__ __volatile__("nop");
-+
-+	return 0;
-+}
-+
-+/*
-+ * int mcf5445x_pci_config_write(unsigned int seg, unsigned int bus,
-+ *			      	 unsigned int devfn, int reg,
-+ *			      	 u32 *value)
-+ *
-+ * Write to PCI configuration space
-+ */
-+int mcf5445x_pci_config_write(unsigned int seg, unsigned int bus,
-+		    unsigned int devfn, int reg, int len, u32 value)
-+{
-+	u32 addr = MCF_PCI_PCICAR_BUSNUM(bus) |
-+		   MCF_PCI_PCICAR_DEVNUM(PCI_SLOT(devfn)) |
-+		   MCF_PCI_PCICAR_FUNCNUM(PCI_FUNC(devfn)) |
-+		   MCF_PCI_PCICAR_DWORD(reg) |
-+		   MCF_PCI_PCICAR_E;
-+
-+	if ((bus > 255) || (devfn > 255) || (reg > 255))
-+		return -EINVAL;
-+
-+	/* setup for config mode */
-+	MCF_PCI_PCICAR = addr;
-+	__asm__ __volatile__("nop");
-+
-+	switch (len) {
-+	case 1:
-+		*(volatile u8 *)(MCF5445X_PCI_CONFIG_BASE+(reg&3)) = (u8)value;
-+		break;
-+	case 2:
-+		*(volatile u16 *)(MCF5445X_PCI_CONFIG_BASE+(reg&2)) =
-+				cpu_to_le16((u16)value);
-+		break;
-+	case 4:
-+		*(volatile u32 *)(MCF5445X_PCI_CONFIG_BASE) =
-+				cpu_to_le32(value);
-+		break;
-+	}
-+
-+	/* clear config mode */
-+	MCF_PCI_PCICAR = ~MCF_PCI_PCICAR_E;
-+	__asm__ __volatile__("nop");
-+
-+	return 0;
-+}
-+
-+/* hardware operations */
-+static struct pci_raw_ops mcf5445x_pci_ops = {
-+	.read =		mcf5445x_pci_config_read,
-+	.write =	mcf5445x_pci_config_write,
-+};
-+
-+/*
-+ * irqreturn_t mcf5445x_pci_interrupt( int irq, void *dev)
-+ *
-+ * PCI controller interrupt handler.
-+ */
-+static irqreturn_t
-+mcf5445x_pci_interrupt(int irq, void *dev)
-+{
-+	u32 status = MCF_PCI_PCIGSCR;
-+#ifdef DEBUG
-+	printk(KERN_INFO "PCI: Controller irq status=0x%08x\n", status);
-+#endif
-+	/* clear */
-+	MCF_PCI_PCIGSCR = status;
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/*
-+ * irqreturn_t mcf5445x_pci_arb_interrupt( int irq, void *dev)
-+ *
-+ * PCI Arbiter interrupt handler.
-+ */
-+static irqreturn_t
-+mcf5445x_pci_arb_interrupt(int irq, void *dev)
-+{
-+	u32 status = MCF_PCIARB_PASR;
-+#ifdef DEBUG
-+	printk(KERN_INFO "PCI: Arbiter irq status=0x%08x\n", status);
-+#endif
-+	/* clear */
-+	MCF_PCIARB_PASR = status;
-+	return IRQ_HANDLED;
-+}
-+
-+/*
-+ * struct pci_bus_info *init_mcf5445x_pci(void)
-+ *
-+ * Machine specific initialisation:
-+ *
-+ * - Allocate and initialise a 'pci_bus_info' structure
-+ * - Initialize hardware
-+ *
-+ * Result: pointer to 'pci_bus_info' structure.
-+ */
-+int __init
-+init_mcf5445x_pci(void)
-+{
-+	return 0;
-+#if 0
-+	/*
-+	 * Initialize the PCI core
-+	 */
-+
-+	/* arbitration controller */
-+	MCF_PCIARB_PACR = MCF_PCIARB_PACR_INTMPRI |
-+			  MCF_PCIARB_PACR_EXTMPRI(0x0f) |
-+			  MCF_PCIARB_PACR_INTMINTEN |
-+			  MCF_PCIARB_PACR_EXTMINTEN(0x0f);
-+
-+	/* pci pin assignment regs */
-+	MCF_GPIO_PAR_PCI = MCF_GPIO_PAR_PCI_GNT0 |
-+			   MCF_GPIO_PAR_PCI_GNT1 |
-+			   MCF_GPIO_PAR_PCI_GNT2 |
-+			   MCF_GPIO_PAR_PCI_GNT3_GNT3 |
-+			   MCF_GPIO_PAR_PCI_REQ0 |
-+			   MCF_GPIO_PAR_PCI_REQ1 |
-+			   MCF_GPIO_PAR_PCI_REQ2 |
-+			   MCF_GPIO_PAR_PCI_REQ3_REQ3;
-+
-+	/* target control reg */
-+	MCF_PCI_PCITCR = MCF_PCI_PCITCR_P |
-+			 MCF_PCI_PCITCR_WCT(8);
-+
-+	/* PCI MEM address */
-+	MCF_PCI_PCIIW0BTAR = 0xA007A000;
-+
-+	/* PCI MEM address */
-+	MCF_PCI_PCIIW1BTAR = 0xA803A800;
-+
-+	/* PCI IO address */
-+	MCF_PCI_PCIIW2BTAR = 0xAC03AC00;
-+
-+	/* window control */
-+	MCF_PCI_PCIIWCR = MCF_PCI_PCIIWCR_WINCTRL0_ENABLE |
-+			  MCF_PCI_PCIIWCR_WINCTRL0_MEMREAD |
-+			  MCF_PCI_PCIIWCR_WINCTRL1_ENABLE |
-+			  MCF_PCI_PCIIWCR_WINCTRL1_MEMREAD |
-+			  MCF_PCI_PCIIWCR_WINCTRL2_ENABLE |
-+			  MCF_PCI_PCIIWCR_WINCTRL2_IO;
-+
-+	/* initiator control reg */
-+	MCF_PCI_PCIICR = 0x00ff;
-+
-+	/* type 0 - command */
-+	MCF_PCI_PCISCR = MCF_PCI_PCISCR_MW |	/* mem write/inval */
-+			 MCF_PCI_PCISCR_B |	/* bus master enable */
-+			 MCF_PCI_PCISCR_M;	/* mem access enable */
-+
-+	/* type 0 - config reg */
-+	MCF_PCI_PCICR1 = MCF_PCI_PCICR1_CACHELINESIZE(8) |
-+			 MCF_PCI_PCICR1_LATTIMER(0xff);
-+
-+	/* type 0 - config 2 reg */
-+	MCF_PCI_PCICR2 = 0;
-+
-+	/* target control reg */
-+	MCF_PCI_PCITCR2 = MCF_PCI_PCITCR2_B0E |
-+			  MCF_PCI_PCITCR2_B4E;
-+
-+	/* translate addresses from PCI[0] to CF[SDRAM] */
-+	MCF_PCI_PCITBATR0 = MCF_RAMBAR1 | MCF_PCI_PCITBATR0_EN;
-+	MCF_PCI_PCITBATR4 = MCF_RAMBAR1 | MCF_PCI_PCITBATR4_EN;
-+
-+	/* setup controller interrupt handlers */
-+	if (request_irq(55+128, mcf5445x_pci_interrupt, IRQF_SHARED,
-+			"PCI Controller", NULL))
-+		printk(KERN_ERR "PCI: Unable to register controller irq\n");
-+
-+	if (request_irq (56+128, mcf5445x_pci_arb_interrupt, IRQF_SHARED, "PCI Arbiter", NULL))
-+		printk(KERN_ERR "PCI: Unable to register arbiter irq\n");
-+
-+	/* global control - clear reset bit */
-+	MCF_PCI_PCIGSCR = MCF_PCI_PCIGSCR_SEE |
-+			  MCF_PCI_PCIGSCR_PEE;
-+
-+	/* let everything settle */
-+	udelay(1000);
-+
-+	/* allocate bus ioport resource */
-+	if (request_resource(&ioport_resource, &pci_ioport_resource) < 0)
-+		printk(KERN_ERR "PCI: Unable to alloc ioport resource\n");
-+
-+	/* allocate bus iomem resource */
-+	if (request_resource(&iomem_resource, &pci_iomem_resource) < 0)
-+		printk(KERN_ERR "PCI: Unable to alloc iomem resource\n");
-+
-+	/* setup FPGA to route PCI to IRQ3(67), SW7 to IRQ7, SW6 to IRQ4 */
-+	set_fpga(FPGA_PCI_IRQ_ENABLE, 0x00000000);
-+	set_fpga(FPGA_PCI_IRQ_ROUTE, 0x00000039);
-+	set_fpga(FPGA_SEVEN_LED, 0x000000FF);
-+
-+	raw_pci_ops = &mcf5445x_pci_ops;
-+
-+	return 0;
-+#endif
-+}
-+
-+/*
-+ * DEBUGGING
-+ */
-+
-+#ifdef DEBUG
-+struct regdump {
-+	u32 addr;
-+	char regname[16];
-+};
-+
-+struct regdump type0regs[] = {
-+	{ 0xfc0a8000, "PCIIDR" },
-+	{ 0xfc0a8004, "PCISCR" },
-+	{ 0xfc0a8008, "PCICCRIR" },
-+	{ 0xfc0a800c, "PCICR1" },
-+	{ 0xfc0a8010, "PCIBAR0" },
-+	{ 0xfc0a8014, "PCIBAR1" },
-+	{ 0xfc0a8018, "PCIBAR2" },
-+	{ 0xfc0a801c, "PCIBAR3" },
-+	{ 0xfc0a8020, "PCIBAR4" },
-+	{ 0xfc0a8024, "PCIBAR5" },
-+	{ 0xfc0a8028, "PCICCPR" },
-+	{ 0xfc0a802c, "PCISID" },
-+	{ 0xfc0a8030, "PCIERBAR" },
-+	{ 0xfc0a8034, "PCICPR" },
-+	{ 0xfc0a803c, "PCICR2" },
-+	{ 0, "" }
-+};
-+
-+struct regdump genregs[] = {
-+	{ 0xfc0a8060, "PCIGSCR" },
-+	{ 0xfc0a8064, "PCITBATR0" },
-+	{ 0xfc0a8068, "PCITBATR1" },
-+	{ 0xfc0a806c, "PCITCR1" },
-+	{ 0xfc0a8070, "PCIIW0BTAR" },
-+	{ 0xfc0a8074, "PCIIW1BTAR" },
-+	{ 0xfc0a8078, "PCIIW2BTAR" },
-+	{ 0xfc0a8080, "PCIIWCR" },
-+	{ 0xfc0a8084, "PCIICR" },
-+	{ 0xfc0a8088, "PCIISR" },
-+	{ 0xfc0a808c, "PCITCR2" },
-+	{ 0xfc0a8090, "PCITBATR0" },
-+	{ 0xfc0a8094, "PCITBATR1" },
-+	{ 0xfc0a8098, "PCITBATR2" },
-+	{ 0xfc0a809c, "PCITBATR3" },
-+	{ 0xfc0a80a0, "PCITBATR4" },
-+	{ 0xfc0a80a4, "PCITBATR5" },
-+	{ 0xfc0a80a8, "PCIINTR" },
-+	{ 0xfc0a80f8, "PCICAR" },
-+	{ 0, "" }
-+};
-+
-+struct regdump arbregs[] = {
-+	{ 0xfc0ac000, "PACR" },
-+	{ 0xfc0ac004, "PASR" },	/* documentation error */
-+	{ 0, "" }
-+};
-+
-+/*
-+ * void mcf5445x_pci_dumpregs()
-+ *
-+ * Dump out all the PCI registers
-+ */
-+void
-+mcf5445x_pci_dumpregs(void)
-+{
-+	struct regdump *reg;
-+
-+	printk(KERN_INFO "*** MCF5445x PCI TARGET 0 REGISTERS ***\n");
-+
-+	reg = type0regs;
-+	while (reg->addr) {
-+		printk(KERN_INFO "0x%08x  0x%08x  %s\n", reg->addr,
-+			*((u32 *)reg->addr), reg->regname);
-+		reg++;
-+	}
-+
-+	printk(KERN_INFO "\n*** MCF5445x PCI GENERAL REGISTERS ***\n");
-+	reg = genregs;
-+	while (reg->addr) {
-+		printk(KERN_INFO "0x%08x  0x%08x  %s\n", reg->addr,
-+			*((u32 *)reg->addr), reg->regname);
-+		reg++;
-+	}
-+	printk(KERN_INFO "\n*** MCF5445x PCI ARBITER REGISTERS ***\n");
-+	reg = arbregs;
-+	while (reg->addr) {
-+		printk(KERN_INFO "0x%08x  0x%08x  %s\n", reg->addr,
-+			*((u32 *)reg->addr), reg->regname);
-+		reg++;
-+	}
-+}
-+#endif /* DEBUG */
---- /dev/null
-+++ b/arch/m68k/coldfire/mcf548x-devices.c
-@@ -0,0 +1,94 @@
-+/*
-+ * arch/m68k/coldfire/mcf5445x-devices.c
-+ *
-+ * Coldfire M5445x Platform Device Configuration
-+ *
-+ * Based on the Freescale MXC devices.c
-+ *
-+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *	Kurt Mahan <kmahan@freescale.com>
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+
-+static struct resource coldfire_i2c_resources[] = {
-+	[0] = {		/* I/O */
-+		.start		= MCF_MBAR + 0x008F00,
-+		.end		= MCF_MBAR + 0x008F20,
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	[2] = {		/* IRQ */
-+		.start		= 40,
-+		.end		= 40,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device coldfire_i2c_device = {
-+	.name			= "MCF548X-i2c",
-+	.id			= -1,
-+	.num_resources		= ARRAY_SIZE(coldfire_i2c_resources),
-+	.resource		= coldfire_i2c_resources,
-+};
-+
-+static struct resource coldfire_sec_resources[] = {
-+	[0] = {         /* I/O */
-+		.start          = MCF_MBAR + 0x00020000,
-+		.end            = MCF_MBAR + 0x00033000,
-+		.flags          = IORESOURCE_MEM,
-+	},
-+	[2] = {         /* IRQ */
-+		.start          = ISC_SEC,
-+		.end            = ISC_SEC,
-+		.flags          = IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device coldfire_sec_device = {
-+	.name                   = "fsl-sec1",
-+	.id                     = -1,
-+	.num_resources          = ARRAY_SIZE(coldfire_sec_resources),
-+	.resource               = coldfire_sec_resources,
-+};
-+
-+#if defined(CONFIG_MTD_PHYSMAP)
-+static struct physmap_flash_data mcf5485_flash_data = {
-+	.width          = 2,
-+};
-+
-+static struct resource mcf5485_flash_resource = {
-+	.start          = 0xf8000000,
-+	.end            = 0xf80fffff,
-+	.flags          = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device mcf5485_flash_device = {
-+	.name           = "physmap-flash",
-+	.id             = 0,
-+	.dev            = {
-+		.platform_data  = &mcf5485_flash_data,
-+	},
-+	.num_resources  = 1,
-+	.resource       = &mcf5485_flash_resource,
-+};
-+#endif
-+
-+static int __init mcf5485_init_devices(void)
-+{
-+	printk(KERN_INFO "MCF5485x INIT_DEVICES\n");
-+
-+	platform_device_register(&coldfire_i2c_device);
-+	platform_device_register(&coldfire_sec_device);
-+/*#if defined(CONFIG_MTD_PHYSMAP)
-+	platform_device_register(&mcf5485_flash_device);
-+#endif*/
-+	return 0;
-+}
-+arch_initcall(mcf5485_init_devices);
---- /dev/null
-+++ b/arch/m68k/coldfire/mcf548x-pci.c
-@@ -0,0 +1,959 @@
-+/*
-+ * 	ColdFire 547x/548x PCI Host Controller functions
-+ *
-+ * Copyright (c) 2005-2008 Freescale Semiconductor, Inc.
-+ *
-+ * This code is based on the 2.6.10 version of pci.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/string.h>
-+#include <linux/pci.h>
-+#include <linux/ioport.h>
-+#include <linux/slab.h>
-+#include <linux/version.h>
-+#include <linux/interrupt.h>
-+
-+#include <linux/dma-mapping.h>
-+#include <asm/coldfire.h>
-+#include <asm/io.h>
-+#include <asm/m5485sim.h>
-+#include <asm/m5485pci.h>
-+#include <asm/irq.h>
-+#include <asm/pci.h>
-+#include <asm/virtconvert.h>
-+
-+
-+#undef DEBUG
-+//#define DEBUG
-+
-+#ifdef DEBUG
-+//#define DBG(x...) printk(KERN_DEBUG x)
-+#define DBG(x...) printk(x)
-+#else
-+#define DBG(x...)
-+#endif
-+
-+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,75))
-+# define irqreturn_t void
-+# define IRQ_HANDLED
-+# define IRQ_NONE
-+#endif
-+
-+/*
-+ *  Bridge configration dafaults
-+ */
-+#define PCI_RETRIES	0
-+#define PCI_CACHE_LINE 	8
-+#define PCI_MINGNT	1
-+#define PCI_MAXLAT	42
-+
-+
-+/*
-+ *  Initiator windows setting
-+ */
-+#define HOST_MEM_BASE    	0xD0000000	/* ColdFire Memory window base 	*/
-+#define PCI_MEM_BASE    	0xD0000000	/* PCI Memory window base	*/
-+#define PCI_MEM_SIZE    	0x08000000	/* Memory window size (128M)	*/
-+#define HOST_IO_BASE     	0xD8000000	/* ColdFire I/O window base 	*/
-+#define PCI_IO_BASE_ADDR     	0x00000000	/* PCI I/O window base 		*/
-+#define PCI_IO_SIZE     	0x00010000	/* I/O window size (64K) 	*/
-+#define HOST_CFG_BASE    	0xD8000000	/* ColdFire config window base 	*/
-+#define HOST_DMA_BASE 	 CONFIG_SDRAM_BASE	/* ColdFire PCI-DMA window base */
-+#define PCI_HDR_BASE    	(MCF_MBAR+0xB00)/* ColdFire config registers    */
-+
-+#define PCI_MEM_MASK		(PCI_MEM_SIZE-1)
-+#define PCI_IO_MASK		(PCI_IO_SIZE-1)
-+
-+/* Macro to set initiator window */
-+#define WxBAR(host_address, pci_address, size) 	\
-+	(((host_address)  & 0xff000000)      |	\
-+    	((((size)-1) & 0xff000000) >> 8)     | 	\
-+	((pci_address) & 0xff000000) >> 16)
-+
-+/*
-+ *  BIOS internal data
-+ */
-+static u8 revision;		/* controller revision */
-+
-+/*
-+ * 	Board specific setting
-+ */
-+const unsigned int irq_lines[] = { 5, 7 };
-+
-+#define N_SLOTS      	(sizeof(board_info) / sizeof(board_info[0]))
-+#define N_IRQS		(sizeof(irq_lines)  / sizeof(irq_lines[0]))
-+#define BRIDGE_SLOT  	0
-+
-+const struct slotinfo {
-+	unsigned char idsel;	/* device number     */
-+	unsigned char irq;	/* external IRQ      */
-+	unsigned char req;	/* REQ line number   */
-+	unsigned char gnt;	/* GNT line number   */
-+} board_info[] = {
-+	{0,  0, 0, 0},		/* Bridge      */
-+	{17, 5, 1, 1},		/* Slot #1     */
-+	{18, 5, 2, 2},		/* Slot #2     */	
-+	{20, 7, 3, 3},		/* Slot #3     */
-+	{21, 7, 4, 4},		/* Slot #4     */
-+};
-+
-+/************************************************************************/
-+
-+/*
-+ * static int mk_conf_addr()
-+ *
-+ * Return type0 or type1 configuration address
-+ * by the means of device address and PCI dword location
-+ * 0 - for not existing slots
-+ */
-+static int mk_conf_addr(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where)
-+{
-+	int slot, func, address, idsel, dev_fn;
-+
-+	if (bus->number) {
-+		address = MCF_PCICAR_E | (bus->number << 16) |
-+		    (devfn << 8) | (where & 0xfc);
-+	} else {
-+		slot = PCI_SLOT(devfn);
-+		if (slot > N_SLOTS || slot == BRIDGE_SLOT)
-+			return 0;
-+		else {
-+			func = PCI_FUNC(devfn);
-+			idsel = board_info[slot].idsel;
-+
-+			dev_fn = PCI_DEVFN(idsel, func);
-+			address = MCF_PCICAR_E | (bus->number << 16) |
-+			    (dev_fn << 8) | (where & 0xfc);
-+		}
-+	}
-+
-+	return (address);
-+}
-+
-+/*
-+ * static int read_config_byte()
-+ *
-+ * Read a byte from configuration space of specified device
-+ */
-+static int read_config_byte(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u8 *value)
-+{
-+	int slot;
-+	int address;
-+	int result;
-+
-+	*value = 0xff;
-+	result = PCIBIOS_SUCCESSFUL;
-+
-+	slot = PCI_SLOT(devfn);
-+	if (slot == BRIDGE_SLOT) {
-+		if (where <= 0x40)
-+			*value = *(volatile u8 *) (PCI_HDR_BASE + (where ^ 3));
-+		else
-+			*value = 0;
-+	} else {
-+		address = mk_conf_addr(bus, devfn, where);
-+		if (!address)
-+			result = PCIBIOS_DEVICE_NOT_FOUND;
-+		else {
-+			MCF_PCICAR = address;
-+			*value = *(volatile u8 *) (HOST_CFG_BASE + (where & 3));
-+		}
-+	}
-+	__asm__ __volatile__("nop");
-+	__asm__ __volatile__("nop");
-+	MCF_PCICAR &= ~MCF_PCICAR_E;
-+
-+	DBG("PCI: read_config_byte bus=%d, devfn=%d, addr=0x%02X, val=0x%02X, ret=%02X\n",
-+	    bus->number, devfn, where, *value, result);
-+
-+	return (result);
-+}
-+
-+/*
-+ * static int read_config_word()
-+ *
-+ * Read a word from configuration space of specified device
-+ */
-+static int read_config_word(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u16 *value)
-+{
-+	int slot;
-+	int address;
-+	int result;
-+
-+	*value = 0xffff;
-+	result = PCIBIOS_SUCCESSFUL;
-+
-+	if (where & 0x1)
-+		result = PCIBIOS_BAD_REGISTER_NUMBER;
-+	else {
-+		slot = PCI_SLOT(devfn);
-+		if (slot == BRIDGE_SLOT) {
-+			if (where <= 0x3f)
-+				*value =
-+				    *(volatile u16 *) (PCI_HDR_BASE +
-+						       (where ^ 2));
-+			else
-+				*value = 0;
-+		} else {
-+			address = mk_conf_addr(bus, devfn, where);
-+			if (!address)
-+				result = PCIBIOS_DEVICE_NOT_FOUND;
-+			else {
-+				MCF_PCICAR = address;
-+				*value = le16_to_cpu(*(volatile u16 *)
-+						     (HOST_CFG_BASE +
-+						      (where & 2)));
-+			}
-+		}
-+	}
-+        __asm__ __volatile__("nop");
-+        __asm__ __volatile__("nop");
-+	MCF_PCICAR &= ~MCF_PCICAR_E;
-+
-+	DBG("PCI: read_config_word bus=%d, devfn=%d, addr=0x%02X, val=0x%04X ret=%02X\n",
-+	    bus->number, devfn, where, *value, result);
-+
-+	return (result);
-+}
-+
-+/*
-+ * static int read_config_dword()
-+ *
-+ * Read a long word from configuration space of specified device
-+ */
-+static int read_config_dword(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u32 *value)
-+{
-+	int slot;
-+	int address;
-+	int result;
-+
-+	*value = 0xffffffff;
-+	result = PCIBIOS_SUCCESSFUL;
-+
-+	if (where & 0x3)
-+		result = PCIBIOS_BAD_REGISTER_NUMBER;
-+	else {
-+		slot = PCI_SLOT(devfn);
-+		if (slot == BRIDGE_SLOT) {
-+			if (where <= 0x3d)
-+				*value =
-+				    *(volatile u32 *) (PCI_HDR_BASE + where);
-+			else
-+				*value = 0;
-+			__asm__ __volatile__("nop");
-+        		__asm__ __volatile__("nop");
-+		} else {
-+			address = mk_conf_addr(bus, devfn, where);
-+			if (!address)
-+				result = PCIBIOS_DEVICE_NOT_FOUND;
-+			else {
-+				MCF_PCICAR = address;
-+				*value = le32_to_cpu(*(volatile u32 *)
-+						     (HOST_CFG_BASE));
-+				__asm__ __volatile__("nop");
-+				__asm__ __volatile__("nop");
-+				if (bus->number != 0 && revision < 1) {
-+					volatile u32 temp;
-+
-+					MCF_PCICAR |= 0xff0000;
-+					temp = *(volatile u32 *) (HOST_CFG_BASE);
-+				}
-+			}
-+		}
-+	}
-+
-+	MCF_PCICAR &= ~MCF_PCICAR_E;
-+
-+	DBG("PCI: read_config_dword bus=%d, devfn=%d, addr=0x%02X, value=0x%08X ret=%02X\n",
-+	     bus->number, devfn, where, *value, result);
-+
-+	return (result);
-+}
-+
-+/*
-+ * static int write_config_byte()
-+ *
-+ * Write a byte to configuration space of specified device
-+ */
-+static int write_config_byte(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u8 value)
-+{
-+	int slot;
-+	int address;
-+	int result;
-+
-+	result = PCIBIOS_SUCCESSFUL;
-+
-+	slot = PCI_SLOT(devfn);
-+	if (slot == BRIDGE_SLOT) {
-+		if (where <= 0x40)
-+			*(volatile u8 *) (PCI_HDR_BASE + (where ^ 3)) = value;
-+	} else {
-+		address = mk_conf_addr(bus, devfn, where);
-+		if (!address)
-+			result = PCIBIOS_DEVICE_NOT_FOUND;
-+		else {
-+			MCF_PCICAR = address;
-+			*(volatile u8 *) (HOST_CFG_BASE + (where & 3)) = value;
-+		}
-+	}
-+        __asm__ __volatile__("nop");
-+        __asm__ __volatile__("nop");
-+	MCF_PCICAR &= ~MCF_PCICAR_E;
-+
-+	DBG("PCI: write_config_byte bus=%d, devfn=%d, addr=0x%02X, value=0x%02X ret=%02X\n",
-+	     bus->number, devfn, where, value, result);
-+
-+	return (result);
-+}
-+
-+/*
-+ * static int write_config_word()
-+ *
-+ * Write a word to configuration space of specified device
-+ */
-+static int write_config_word(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u16 value)
-+{
-+	int slot;
-+	int address;
-+	int result;
-+
-+	result = PCIBIOS_SUCCESSFUL;
-+
-+	if (where & 0x1)
-+		result = PCIBIOS_BAD_REGISTER_NUMBER;
-+	else {
-+		slot = PCI_SLOT(devfn);
-+		if (slot == BRIDGE_SLOT) {
-+			if (where <= 0x3f)
-+				*(volatile u16 *) (PCI_HDR_BASE + (where ^ 2)) =
-+				    value;
-+		} else {
-+			address = mk_conf_addr(bus, devfn, where);
-+			if (!address)
-+				result = PCIBIOS_DEVICE_NOT_FOUND;
-+			else {
-+				MCF_PCICAR = address;
-+				*(volatile u16 *) (HOST_CFG_BASE + (where & 2)) =
-+				    cpu_to_le16(value);
-+			}
-+		}
-+	}
-+	__asm__ __volatile__("nop");
-+        __asm__ __volatile__("nop");
-+	MCF_PCICAR &= ~MCF_PCICAR_E;
-+
-+	DBG("PCI: write_config_word bus=%d, devfn=%d, addr=0x%02X, value=0x%04X ret=%02X\n",
-+	     bus->number, devfn, where, value, result);
-+
-+	return (result);
-+}
-+
-+/*
-+ * static int write_config_dword()
-+ *
-+ * Write a long word to configuration space of specified device
-+ */
-+static int write_config_dword(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u32 value)
-+{
-+	int slot;
-+	int address;
-+	int result;
-+
-+	result = PCIBIOS_SUCCESSFUL;
-+
-+	if (where & 0x3)
-+		result = PCIBIOS_BAD_REGISTER_NUMBER;
-+	else {
-+		slot = PCI_SLOT(devfn);
-+		if (slot == BRIDGE_SLOT) {
-+			if (where <= 0x3d)
-+				*(volatile u32 *) (PCI_HDR_BASE + where) =
-+				    value;
-+		} else {
-+			address = mk_conf_addr(bus, devfn, where);
-+			if (!address)
-+				result = PCIBIOS_DEVICE_NOT_FOUND;
-+			else {
-+				MCF_PCICAR = address;
-+				*(volatile u32 *) (HOST_CFG_BASE) =
-+				    cpu_to_le32(value);
-+			}
-+		}
-+	}
-+	__asm__ __volatile__("nop");
-+        __asm__ __volatile__("nop");
-+	MCF_PCICAR &= ~MCF_PCICAR_E;
-+
-+	DBG("PCI: write_config_dword dev=%d, fn=%d, addr=0x%02X, value=0x%08X ret=%02X\n",
-+	    PCI_SLOT(devfn), PCI_FUNC(devfn), where,  value, result);
-+
-+	return (result);
-+}
-+
-+static int config_read(struct pci_bus *bus, unsigned int devfn,
-+		       int where, int size, u32 * val)
-+{
-+	switch (size) {
-+	case 1:
-+		return read_config_byte(bus, devfn, where, (u8 *) val);
-+	case 2:
-+		return read_config_word(bus, devfn, where, (u16 *) val);
-+	default:
-+		return read_config_dword(bus, devfn, where, val);
-+	}
-+}
-+
-+static int config_write(struct pci_bus *bus, unsigned int devfn,
-+			int where, int size, u32 val)
-+{
-+	switch (size) {
-+	case 1:
-+		return write_config_byte(bus, devfn, where, (u8) val);
-+	case 2:
-+		return write_config_word(bus, devfn, where, (u16) val);
-+	default:
-+		return write_config_dword(bus, devfn, where, val);
-+	}
-+}
-+
-+/*
-+ *  configuration routines entry points
-+ */
-+static struct pci_ops bus_ops = {
-+      read:		config_read,
-+      write:		config_write
-+};
-+
-+/************************************************************************/
-+
-+/*
-+ * u8 pci_inb()
-+ *
-+ * Read a byte at specified address from I/O space
-+ */
-+unsigned char pci_inb(long addr)
-+{
-+	char value;
-+
-+	value = *(volatile unsigned char *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+	DBG("PCI: inb addr=0x%08X, value=0x%02X\n", addr, value);
-+
-+	return (unsigned char) value;
-+}
-+
-+
-+/*
-+ * u16 pci_inw()
-+ *
-+ * Read a word at specified address from I/O space
-+ */
-+unsigned short pci_inw(long addr)
-+{
-+	short value;
-+	volatile unsigned short *ptr;
-+
-+	ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+	value = le16_to_cpu(*ptr);
-+
-+	DBG("PCI: inw addr=0x%08X, value=0x%04X\n",  addr, value);
-+	return (unsigned short) value;
-+}
-+
-+/*
-+ * u16 pci_raw_inw()
-+ *
-+ * Read a raw word at specified address from I/O space
-+ */
-+unsigned short pci_raw_inw(long addr)
-+{
-+	short value;
-+	volatile unsigned short *ptr;
-+
-+	ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+	value = *ptr;
-+
-+	DBG("PCI: raw_inw addr=0x%08X, value=0x%04X\n",  addr, value);
-+	return (unsigned short) value;
-+}
-+
-+/*
-+ * u32 pci_inl()
-+ *
-+ * Read a dword at specified address from I/O space
-+ */
-+unsigned long pci_inl(long addr)
-+{
-+	long value;
-+	volatile unsigned long *ptr;
-+
-+	ptr = (volatile unsigned long *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+	value = le32_to_cpu(*ptr);
-+
-+	DBG("PCI: inl addr=0x%08X, value=0x%08X\n",  addr, value);
-+	return (unsigned long) value;
-+}
-+
-+/*
-+ * u32 pci_raw_inl()
-+ *
-+ * Read a raw dword at specified address from I/O space
-+ */
-+unsigned long pci_raw_inl(long addr)
-+{
-+	long value;
-+	volatile unsigned long *ptr;
-+
-+	ptr = (volatile unsigned long *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+	value = *ptr;
-+
-+	DBG("PCI: raw_inl addr=0x%08X, value=0x%08X\n",  addr, value);
-+	return (unsigned long) value;
-+}
-+
-+/*
-+ * void pci_outb()
-+ *
-+ * Write a byte value at specified address to I/O space
-+ */
-+void pci_outb( unsigned char value,  long addr)
-+{
-+
-+	*(volatile unsigned char *) (HOST_IO_BASE | (addr & PCI_IO_MASK)) = value;
-+	DBG("PCI: outb addr=0x%08X, value=0x%02X\n",  addr, value);
-+}
-+
-+
-+/*
-+ * void pci_outw()
-+ *
-+ * Write a word value at specified address to I/O space
-+ */
-+void pci_outw(volatile unsigned short value, volatile  long addr)
-+{
-+	volatile unsigned short *ptr;
-+
-+	ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+	*ptr = cpu_to_le16(value);
-+	DBG("PCI: outw addr=0x%08X, value=0x%04X\n",  addr, value);
-+}
-+
-+/*
-+ * void pci_raw_outw()
-+ *
-+ * Write a raw word value at specified address to I/O space
-+ */
-+void pci_raw_outw(volatile unsigned short value, volatile  long addr)
-+{
-+	volatile unsigned short *ptr;
-+
-+	ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
-+	*ptr = value;
-+	DBG("PCI: raw_outw addr=0x%08X, value=0x%04X\n",  addr, value);
-+}
-+
-+/*
-+ * void pci_outl()
-+ *
-+ * Write a long word value at specified address to I/O space
-+ */
-+void pci_outl(volatile unsigned long value, volatile long addr)
-+{
-+	volatile unsigned long *ptr;
-+
-+	ptr = (volatile unsigned long *)(HOST_IO_BASE | (addr & PCI_IO_MASK));
-+	*ptr = cpu_to_le32(value);
-+	DBG("PCI: outl addr=0x%08X, value=0x%08X\n", addr, value);
-+}
-+
-+/*
-+ * void pci_raw_outl()
-+ *
-+ * Write a raw long word value at specified address to I/O space
-+ */
-+void pci_raw_outl(volatile unsigned long value, volatile long addr)
-+{
-+	volatile unsigned long *ptr;
-+
-+	ptr = (volatile unsigned long *)(HOST_IO_BASE | (addr & PCI_IO_MASK));
-+	*ptr = value;
-+	DBG("PCI: raw_outl addr=0x%08X, value=0x%08X\n", addr, value);
-+}
-+
-+/*
-+ * void pci_insb()
-+ *
-+ * Read several byte values from specified I/O port
-+ */
-+void pci_insb(volatile unsigned char *addr, unsigned char *buf, int len)
-+{
-+	for (; len--; buf++)
-+		*buf = pci_inb((unsigned long)addr);
-+	DBG("PCI: pci_insb addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+
-+/*
-+ * void pci_insw()
-+ *
-+ * Read several word values from specified I/O port
-+ */
-+void pci_insw(volatile unsigned short *addr, unsigned short *buf, int len)
-+{
-+	for (; len--; buf++)
-+		*buf = pci_inw((unsigned long)addr);
-+	DBG("PCI: pci_insw addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+/*
-+ * void pci_insl()
-+ *
-+ * Read several dword values from specified I/O port
-+ */
-+void pci_insl(volatile unsigned long *addr, unsigned long *buf, int len)
-+{
-+	for (; len--; buf++)
-+		*buf = pci_inl((unsigned long)addr);
-+	DBG("PCI: pci_insl addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+/*
-+ * void pci_outsb()
-+ *
-+ * Write several byte values to specified I/O port
-+ */
-+void pci_outsb(volatile unsigned char *addr, const unsigned char *buf, int len)
-+{
-+	for (; len--; buf++)
-+		pci_outb((unsigned long)addr, *buf);
-+	DBG("PCI: pci_outsb addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+/*
-+ * void pci_outsw()
-+ *
-+ * Write several word values to specified I/O port
-+ */
-+void pci_outsw(volatile unsigned short *addr, const unsigned short *buf, int len)
-+{
-+	for (; len--; buf++)
-+		pci_outw((unsigned long)addr, *buf);
-+	DBG("PCI: pci_outsw addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+/*
-+ * void pci_outsl()
-+ *
-+ * Write several dword values to specified I/O port
-+ */
-+void pci_outsl(volatile unsigned long *addr, const unsigned long *buf, int len)
-+{
-+	for (; len--; buf++)
-+		pci_outl((unsigned long)addr, *buf);
-+	DBG("PCI: pci_outsl addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
-+}
-+
-+/*
-+ * void pci_xlb_handler()
-+ *
-+ * PCI XLB interrupt handler
-+ */
-+irqreturn_t xlb_interrupt(int irq, void *dev)
-+{
-+	volatile int xlb_error = MCF_PCIISR;
-+
-+	/* Acknowlege interrupt */
-+	MCF_PCIISR = xlb_error;
-+
-+	/* Dump interrupt reason */
-+	if (xlb_error & MCF_PCIISR_RE)
-+		DBG("PCI: Retry Error Received\n");
-+		
-+	if (xlb_error & MCF_PCIISR_IA)
-+		DBG("PCI: Initiator Abort Received\n");
-+		
-+	if (xlb_error & MCF_PCIISR_TA)
-+		DBG("PCI: Target Abort Received\n");
-+
-+	return IRQ_HANDLED;
-+}
-+
-+
-+/*
-+ * void pci_arbiter_handler()
-+ *
-+ * PCI arbiter interrupt handler
-+ */
-+irqreturn_t arb_interrupt(int irq, void *dev)
-+{
-+	volatile unsigned long arb_error = MCF_PCIARB_PASR;
-+
-+	/* Acknowlege interrupt */
-+	printk("%s\n",__FUNCTION__);
-+	MCF_PCIARB_PASR = arb_error;
-+
-+	if (arb_error & MCF_PCIARB_PASR_ITLMBK) {
-+		DBG("PCI: coldfire master time-out\n");				
-+				
-+		/* Set infinite  number of retries */			
-+	        MCF_PCIICR &= ~0xFF;		    		
-+	}
-+		
-+	if (arb_error & MCF_PCIARB_PASR_EXTMBK(0x1F)) {
-+		arb_error >>= 17;
-+		DBG("PCI: external master time-out (mask = 0x%X)\n", arb_error);
-+		
-+	        /* raise arbitration priority level */		
-+		MCF_PCIARB_PACR = MCF_PCIARB_PACR_EXTMPRI(arb_error);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+
-+/*
-+ * void pci_eint_handler()
-+ *
-+ * Eport interrupt handler
-+ */
-+irqreturn_t eint_handler(int irq, void *dev)
-+{
-+	/* Just acknowlege interrupt and exit */
-+	MCF_EPFR = 0x1 << (irq - 64);
-+	return IRQ_HANDLED;
-+}
-+
-+
-+/*
-+ * void __init coldfire_fixup(int pci_modify)
-+ *
-+ * Assign IRQ numbers as used by Linux to the interrupt pins
-+ * of the PCI cards.
-+ */
-+static void __init coldfire_fixup(int pci_modify)
-+{
-+	struct pci_dev *dev;
-+	unsigned char slot, pin;
-+
-+	DBG("%s\n",__FUNCTION__);
-+#ifdef NL_ORIGINAL
-+	pci_for_each_dev(dev) {
-+#else
-+	dev = NULL;
-+	while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-+#endif
-+		if (dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) {
-+			slot = PCI_SLOT(dev->devfn);
-+			dev->irq = 64 + board_info[slot].irq;
-+
-+			/* Check if device needs interrupt */
-+#ifdef NL_ORIGINAL
-+			pcibios_read_config_byte(
-+				    dev->bus->number, dev->devfn,
-+    				    PCI_INTERRUPT_PIN, &pin);
-+
-+			if ( pin ) {
-+				pcibios_write_config_byte(
-+					dev->bus->number, dev->devfn,
-+					PCI_INTERRUPT_LINE, dev->irq);
-+			}
-+#else
-+			pci_read_config_byte(dev,
-+    				    PCI_INTERRUPT_PIN, &pin);
-+
-+			if ( pin ) {
-+				pci_write_config_byte(dev,
-+					PCI_INTERRUPT_LINE, dev->irq);
-+			}
-+#endif
-+		}
-+	}
-+}
-+
-+static void __init configure_device(struct pci_dev *dev)
-+{
-+	/* TODO: This should depend from disable_pci_burst setting */
-+	DBG("%s\n",__FUNCTION__);
-+#ifdef NL_ORIGINAL
-+	pcibios_write_config_byte(bus, devfn, PCI_CACHE_LINE_SIZE, PCI_CACHE_LINE);
-+#else
-+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, PCI_CACHE_LINE);
-+#endif
-+}
-+
-+struct pci_bus_info *__init init_coldfire_pci(void)
-+{
-+	static struct pci_bus_info bus;
-+	int i;
-+	int pci_mem_va;
-+	static char irq_name[N_IRQS][15];
-+
-+	/* Get controller revision */
-+	revision = MCF_PCICCRIR;
-+	printk("ColdFire PCI Host Bridge (Rev. %d) detected:"
-+		"MEMBase %x,MEMLen %x,IOBase %x,IOLen %x\n",
-+		revision, HOST_MEM_BASE, PCI_MEM_SIZE - 1, 0, PCI_IO_SIZE - 1);
-+
-+	/* Setup bus info structure. */
-+	memset(&bus, 0, sizeof (struct pci_bus_info));
-+
-+	/* Request intiator memory resource */
-+	bus.mem_space.start = PCI_MEM_BASE;//HOST_MEM_BASE;
-+	bus.mem_space.end = bus.mem_space.start + PCI_MEM_SIZE - 1;
-+	bus.mem_space.name = "PCI Bus #0";
-+	if (request_resource(&iomem_resource, &bus.mem_space) != 0)
-+	{
-+		printk("Failed to request bridge iomem resource\n");
-+		return NULL;
-+	}
-+
-+	/* Request intiator memory resource */
-+	bus.io_space.start = 0;
-+	bus.io_space.end = bus.io_space.start + PCI_IO_SIZE - 1;
-+	bus.io_space.name =  "PCI Bus #0";
-+	if (request_resource(&ioport_resource, &bus.io_space) != 0)
-+	{
-+		printk("Failed to request bridge ioport resource\n");
-+		return NULL;
-+	}
-+
-+	/* Must Reset!!! If bootloader has PCI enabled, it will cause
-+	 * problem in linux when it tries to configure/find resources
-+	 * for the pci devices.  Both registers need to be reset.
-+	 */
-+	MCF_PCIGSCR = 0x1;
-+	MCF_PCITCR = 0x00000000;
-+
-+	/* Set up the arbiter */
-+	MCF_PCIARB_PACR = 0 /*MCF_PCIARB_PACR_PKMD*/
-+			| MCF_PCIARB_PACR_INTMPRI 
-+			| MCF_PCIARB_PACR_INTMINTEN 
-+			| MCF_PCIARB_PACR_EXTMPRI(0x1F) 
-+			| MCF_PCIARB_PACR_EXTMINTEN(0x1F);
-+
-+	/* GNT and REQ */
-+	MCF_PAR_PCIBG = 0x3FF;
-+	MCF_PAR_PCIBR = 0x3FF;
-+
-+	/* Enable bus mastering, memory access and MWI */
-+	MCF_PCISCR = MCF_PCISCR_B | MCF_PCISCR_M | MCF_PCISCR_MW;
-+
-+	/* Setup burst parameters */
-+	MCF_PCICR1 = MCF_PCICR1_LATTIMER(32) |
-+	    	     MCF_PCICR1_CACHELINESIZE(PCI_CACHE_LINE);
-+
-+	MCF_PCICR2 = 0;
-+	/*MCF_PCICR2_MINGNT(PCI_MINGNT) |
-+		MCF_PCICR2_MAXLAT(PCI_MAXLAT);
-+	*/
-+	/* Turn on error signaling */
-+	MCF_PCIICR = MCF_PCIICR_TAE | MCF_PCIICR_IAE | PCI_RETRIES;
-+	MCF_PCIGSCR |= MCF_PCIGSCR_SEE;
-+	/*
-+	 * Configure Initiator Windows
-+	 * Window 0: 128M PCI Memory @ HOST_MEM_BASE, 1:1 mapping
-+	 * Window 1: 64K  I/O Memory @ HOST_IO_BASE,  1:0 mapping
-+	 */
-+	MCF_PCIIW0BTAR = WxBAR(HOST_MEM_BASE, PCI_MEM_BASE, PCI_MEM_SIZE);
-+	MCF_PCIIW1BTAR = WxBAR(HOST_IO_BASE,  PCI_IO_BASE_ADDR,  PCI_IO_SIZE);
-+
-+	MCF_PCIIWCR = MCF_PCIIWCR_WINCTRL1_IO |
-+	    	      MCF_PCIIWCR_WINCTRL0_MEMRDLINE;
-+
-+	/* Target PCI DMA Windows */
-+	MCF_PCIBAR1   = PCI_DMA_BASE;
-+	MCF_PCITBATR1 = HOST_DMA_BASE | MCF_PCITBATR1_EN;
-+        MCF_PCIBAR0   = MCF_RAMBAR0;;
-+        MCF_PCITBATR0 = MCF_RAMBAR0 | MCF_PCITBATR0_EN;
-+        DBG("PCI TCR %x,MCF_PCIBAR1 %x,MCF_PCITBATR1 %x."
-+		"MCF_PCIBAR0 %x,MCF_PCITBATR9 %x\n", MCF_PCITCR, MCF_PCIBAR1,
-+		MCF_PCITBATR1, MCF_PCIBAR0, MCF_PCITBATR0);
-+	/* Enable internal PCI controller interrupts */
-+	MCF_ICR(ISC_PCI_XLB) = ILP_PCI_XLB;
-+	/*request_irq(64+ISC_PCI_XLB, xlb_interrupt, 
-+			SA_INTERRUPT, "PCI XL Bus", (void*)-1);
-+	enable_irq (64+ISC_PCI_XLB);
-+	*/
-+        if(request_irq(64+ISC_PCI_XLB, xlb_interrupt, 
-+                         IRQF_DISABLED, "PCI XL Bus", (void*)-1)){
-+		printk("Cannot allocate ISC_PCI_XLB  IRQ\n");
-+                return (struct pci_bus_info *)-EBUSY;
-+	}
-+
-+	MCF_ICR(ISC_PCI_ARB) = ILP_PCI_ARB;
-+	/*request_irq(64+ISC_PCI_ARB, arb_interrupt, 
-+			SA_INTERRUPT, "PCI Arbiter", (void*)-1);
-+	enable_irq (64+ISC_PCI_ARB);
-+	*/
-+        if(request_irq(64+ISC_PCI_ARB, arb_interrupt,
-+                        IRQF_DISABLED, "PCI Arbiter", (void*)-1)){
-+                printk("Cannot allocate ISC_PCI_ARB  IRQ\n");
-+                return (struct pci_bus_info *)-EBUSY;
-+        }
-+
-+	/* Set slots interrupt setting */
-+	for (i = 0; i < N_IRQS; i++) 
-+	{	
-+		/* Set trailing edge for PCI interrupts */
-+		MCF_EPPAR &= ~MCF_EPPAR_EPPA(irq_lines[i], 0x3);
-+		if (irq_lines[i] == 5)
-+			MCF_EPPAR |= MCF_EPPAR_EPPA(irq_lines[i],  MCF_EPPAR_EPPAx_FALLING);
-+		else
-+                        MCF_EPPAR |= MCF_EPPAR_EPPA(irq_lines[i],  0/*MCF_EPPAR_EPPAx_FALLING*/);
-+		/* Turn on irq line in eport */
-+		MCF_EPIER |= MCF_EPIER_EPIE(irq_lines[i]);
-+
-+		/* Enable irq in gpio */
-+		if (irq_lines[i] == 5)
-+		    MCF_PAR_FECI2CIRQ |= 1;
-+		    
-+		if (irq_lines[i] == 6)
-+		    MCF_PAR_FECI2CIRQ |= 2;   
-+
-+		/* Register external interrupt handlers */
-+		sprintf(irq_name[i], "PCI IRQ%d", irq_lines[i]);
-+		/*request_irq(64 + irq_lines[i], eint_handler, 
-+			    SA_SHIRQ, irq_name[i], (void*)-1);
-+		enable_irq(64 + irq_lines[i]);*/
-+        	if(request_irq(64 + irq_lines[i], eint_handler, 
-+				IRQF_SHARED, irq_name[i], (void*)-1)){
-+                	printk("Cannot allocate irq_lines[%d] IRQ\n", irq_lines[i]);
-+                	return (struct pci_bus_info *)-EBUSY;
-+        	}
-+	}
-+
-+	/* Clear PCI Reset and wait for devices to reset */
-+	MCF_PCIGSCR &= ~MCF_PCIGSCR_PR;
-+	schedule_timeout((5 * HZ) / 10);
-+	/* Remap initiator windows (should be 1:1 to the physical memory) */
-+	pci_mem_va = (int) ioremap_nocache(HOST_MEM_BASE, PCI_MEM_SIZE + PCI_IO_SIZE);
-+#if 1
-+	printk("%s: MEMBase_phy %x, Virt %x, len %x\n",__FUNCTION__,
-+		HOST_MEM_BASE,pci_mem_va,PCI_MEM_SIZE + PCI_IO_SIZE);
-+#endif
-+	BUG_ON(pci_mem_va != HOST_MEM_BASE);
-+
-+	/* Setup bios32 and pci bus driver callbacks */
-+	bus.m68k_pci_ops = &bus_ops;
-+	bus.fixup = coldfire_fixup;
-+	bus.conf_device = configure_device;
-+
-+	return &bus;
-+}
-+
---- /dev/null
-+++ b/arch/m68k/coldfire/muldi3.S
-@@ -0,0 +1,64 @@
-+/*
-+ * Coldfire muldi3 assembly verion
-+ */
-+ 
-+#include <linux/linkage.h>
-+.globl __muldi3
-+
-+ENTRY(__muldi3)
-+	linkw 	%fp,#0
-+	lea 	%sp@(-32),%sp
-+	moveml 	%d2-%d7/%a2-%a3,%sp@
-+	moveal 	%fp@(8), %a2
-+	moveal 	%fp@(12), %a3
-+	moveal  %fp@(16), %a0
-+	moveal  %fp@(20),%a1
-+	movel 	%a3,%d2
-+	andil   #65535,%d2
-+	movel   %a3,%d3
-+	clrw 	%d3
-+	swap 	%d3
-+	movel 	%a1,%d0
-+	andil 	#65535,%d0
-+	movel 	%a1,%d1
-+	clrw 	%d1
-+	swap 	%d1
-+	movel 	%d2,%d7
-+	mulsl 	%d0,%d7
-+	movel 	%d2,%d4
-+	mulsl 	%d1,%d4
-+	movel 	%d3,%d2
-+	mulsl 	%d0,%d2
-+	mulsl 	%d1,%d3
-+	movel 	%d7,%d0
-+	clrw 	%d0
-+	swap 	%d0
-+	addl 	%d0,%d4
-+	addl 	%d2,%d4
-+	cmpl 	%d4,%d2
-+	blss 	1f
-+	addil 	#65536,%d3
-+1:
-+	movel 	%d4,%d0
-+	clrw 	%d0
-+	swap 	%d0
-+	movel 	%d3,%d5
-+	addl 	%d0,%d5
-+	movew 	%d4,%d6
-+	swap 	%d6
-+	movew 	%d7,%d6
-+	movel 	%d5,%d0
-+	movel 	%d6,%d1
-+	movel 	%a3,%d2
-+	movel 	%a0,%d3
-+	mulsl 	%d3,%d2
-+	movel 	%a2,%d3
-+	movel 	%a1,%d4
-+	mulsl 	%d4,%d3
-+	addl 	%d3,%d2
-+	movel 	%d2,%d0
-+	addl 	%d5,%d0
-+	moveml 	%sp@, %d2-%d7/%a2-%a3
-+	lea 	%sp@(32),%sp
-+	unlk 	%fp
-+	rts
---- /dev/null
-+++ b/arch/m68k/coldfire/pci.c
-@@ -0,0 +1,245 @@
-+/*
-+ * linux/arch/m68k/coldfire/pci.c
-+ *
-+ * PCI initialization for Coldfire architectures.
-+ *
-+ * Currently Supported:
-+ *	M5445x
-+ *
-+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *	Kurt Mahan <kmahan@freescale.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/pci.h>
-+
-+#include <asm/mcfsim.h>
-+#include <asm/pci.h>
-+
-+/* pci ops for reading/writing config */
-+struct pci_raw_ops *raw_pci_ops;
-+
-+/* pci debug flag */
-+static int debug_pci;
-+
-+#ifdef CONFIG_M54455
-+extern int init_mcf5445x_pci(void);
-+extern void mcf5445x_conf_device(struct pci_dev *dev);
-+extern void mcf5445x_pci_dumpregs(void);
-+
-+extern struct resource pci_ioport_resource;
-+extern struct resource pci_iomem_resource;
-+#endif
-+
-+static int
-+pci_read(struct pci_bus *bus, unsigned int devfn, int where,
-+	 int size, u32 *value)
-+{
-+	return raw_pci_ops->read(0, bus->number, devfn, where, size, value);
-+}
-+
-+static int
-+pci_write(struct pci_bus *bus, unsigned int devfn, int where,
-+	  int size, u32 value)
-+{
-+	return raw_pci_ops->write(0, bus->number, devfn, where, size, value);
-+}
-+
-+struct pci_ops pci_root_ops = {
-+	.read = pci_read,
-+	.write = pci_write,
-+};
-+
-+/*
-+ * pcibios_setup(char *)
-+ *
-+ * Initialize the pcibios based on cmd line params.
-+ */
-+char *
-+pcibios_setup(char *str)
-+{
-+	if (!strcmp(str, "debug")) {
-+		debug_pci = 1;
-+		return NULL;
-+	}
-+	return str;
-+}
-+
-+/*
-+ * We need to avoid collisions with `mirrored' VGA ports
-+ * and other strange ISA hardware, so we always want the
-+ * addresses to be allocated in the 0x000-0x0ff region
-+ * modulo 0x400.
-+ *
-+ * Why? Because some silly external IO cards only decode
-+ * the low 10 bits of the IO address. The 0x00-0xff region
-+ * is reserved for motherboard devices that decode all 16
-+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
-+ * but we want to try to avoid allocating at 0x2900-0x2bff
-+ * which might have be mirrored at 0x0100-0x03ff..
-+ */
-+void
-+pcibios_align_resource(void *data, struct resource *res, resource_size_t size,
-+		       resource_size_t align)
-+{
-+	struct pci_dev *dev = data;
-+
-+	if (res->flags & IORESOURCE_IO) {
-+		resource_size_t start = res->start;
-+
-+		if (size > 0x100)
-+			printk(KERN_ERR "PCI: I/O Region %s/%d too large"
-+			       " (%ld bytes)\n", pci_name(dev),
-+			       dev->resource - res, (long int)size);
-+
-+		if (start & 0x300) {
-+			start = (start + 0x3ff) & ~0x3ff;
-+			res->start = start;
-+		}
-+	}
-+}
-+
-+/*
-+ * Swizzle the device pin each time we cross a bridge
-+ * and return the slot number.
-+ */
-+static u8 __devinit
-+pcibios_swizzle(struct pci_dev *dev, u8 *pin)
-+{
-+	return 0;
-+}
-+
-+/*
-+ * Map a slot/pin to an IRQ.
-+ */
-+static int
-+pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	return 0x43;
-+}
-+
-+/*
-+ * pcibios_update_irq(struct pci_dev *dev, int irq)
-+ *
-+ * Update a PCI interrupt.
-+ */
-+void
-+pcibios_update_irq(struct pci_dev *dev, int irq)
-+{
-+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-+}
-+
-+/*
-+ * pcibios_enable_device(struct pci_dev *dev, int mask)
-+ *
-+ * Enable a device on the PCI bus.
-+ */
-+int
-+pcibios_enable_device(struct pci_dev *dev, int mask)
-+{
-+	u16 cmd, old_cmd;
-+	int idx;
-+	struct resource *r;
-+
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	old_cmd = cmd;
-+	for (idx = 0; idx < 6; idx++) {
-+		r = &dev->resource[idx];
-+		if (!r->start && r->end) {
-+			printk(KERN_ERR "PCI: Device %s not available because "
-+			       "of resource collisions\n", pci_name(dev));
-+			return -EINVAL;
-+		}
-+		if (r->flags & IORESOURCE_IO)
-+			cmd |= PCI_COMMAND_IO;
-+		if (r->flags & IORESOURCE_MEM)
-+			cmd |= PCI_COMMAND_MEMORY;
-+	}
-+	if (cmd != old_cmd) {
-+		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-+		       pci_name(dev), old_cmd, cmd);
-+		pci_write_config_word(dev, PCI_COMMAND, cmd);
-+#ifdef CONFIG_M54455
-+		mcf5445x_conf_device(dev);
-+#endif
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * pcibios_fixup_bus(struct pci_bus *bus)
-+ */
-+void
-+pcibios_fixup_bus(struct pci_bus *bus)
-+{
-+	struct pci_dev *dev = bus->self;
-+
-+	if (!dev) {
-+		/* Root bus. */
-+#ifdef CONFIG_M54455
-+		bus->resource[0] = &pci_ioport_resource;
-+		bus->resource[1] = &pci_iomem_resource;
-+#endif
-+	}
-+}
-+
-+/*
-+ * pcibios_init(void)
-+ *
-+ * Allocate/initialize low level pci bus/devices.
-+ */
-+static int __init
-+pcibios_init(void)
-+{
-+	struct pci_bus *bus;
-+
-+	if (!raw_pci_ops) {
-+		printk(KERN_WARNING "PCIBIOS: FATAL: NO PCI Hardware found\n");
-+		return 0;
-+	}
-+
-+	/* allocate and scan the (only) bus */
-+	bus = pci_scan_bus_parented(NULL, 0, &pci_root_ops, NULL);
-+
-+	/* setup everything */
-+	if (bus) {
-+		/* compute the bridge window sizes */
-+		pci_bus_size_bridges(bus);
-+
-+		/* (re)assign device resources */
-+		pci_bus_assign_resources(bus);
-+
-+		/* add the bus to the system */
-+		pci_bus_add_devices(bus);
-+
-+		/* fixup irqs */
-+		pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq);
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * pci_init(void)
-+ *
-+ * Initialize the PCI Hardware.
-+ */
-+static int __init
-+pci_init(void)
-+{
-+#if defined(CONFIG_M54455)
-+	init_mcf5445x_pci();
-+#endif
-+	if (!raw_pci_ops)
-+		printk(KERN_ERR "PCI: FATAL: NO PCI Detected\n");
-+
-+	return 0;
-+}
-+
-+/* low level hardware (first) */
-+arch_initcall(pci_init);
-+
-+/* basic bios init (second) */
-+subsys_initcall(pcibios_init);
---- /dev/null
-+++ b/arch/m68k/coldfire/signal.c
-@@ -0,0 +1,871 @@
-+/*
-+ *  linux/arch/m68k/kernel/signal.c
-+ *
-+ *  Copyright (C) 1991, 1992  Linus Torvalds
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
-+/*
-+ * Derived from m68k/kernel/signal.c and the original authors are credited
-+ * there.
-+ *
-+ * Coldfire support by:
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ * Copyright Freescale Semiconductor, Inc 2007
-+ */
-+
-+#include <linux/sched.h>
-+#include <linux/mm.h>
-+#include <linux/kernel.h>
-+#include <linux/signal.h>
-+#include <linux/syscalls.h>
-+#include <linux/errno.h>
-+#include <linux/wait.h>
-+#include <linux/ptrace.h>
-+#include <linux/unistd.h>
-+#include <linux/stddef.h>
-+#include <linux/highuid.h>
-+#include <linux/personality.h>
-+#include <linux/tty.h>
-+#include <linux/binfmts.h>
-+
-+#include <asm/setup.h>
-+#include <asm/cf_uaccess.h>
-+#include <asm/cf_pgtable.h>
-+#include <asm/traps.h>
-+#include <asm/ucontext.h>
-+#include <asm/cacheflush.h>
-+
-+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-+
-+asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs);
-+
-+const int frame_extra_sizes[16] = {
-+  [1]	= -1,
-+  [2]	= sizeof(((struct frame *)0)->un.fmt2),
-+  [3]	= sizeof(((struct frame *)0)->un.fmt3),
-+  [4]	= 0,
-+  [5]	= -1,
-+  [6]	= -1,
-+  [7]	= sizeof(((struct frame *)0)->un.fmt7),
-+  [8]	= -1,
-+  [9]	= sizeof(((struct frame *)0)->un.fmt9),
-+  [10]	= sizeof(((struct frame *)0)->un.fmta),
-+  [11]	= sizeof(((struct frame *)0)->un.fmtb),
-+  [12]	= -1,
-+  [13]	= -1,
-+  [14]	= -1,
-+  [15]	= -1,
-+};
-+
-+/*
-+ * Atomically swap in the new signal mask, and wait for a signal.
-+ */
-+asmlinkage int do_sigsuspend(struct pt_regs *regs)
-+{
-+	old_sigset_t mask = regs->d3;
-+	sigset_t saveset;
-+
-+	mask &= _BLOCKABLE;
-+	spin_lock_irq(&current->sighand->siglock);
-+	saveset = current->blocked;
-+	siginitset(&current->blocked, mask);
-+	recalc_sigpending();
-+	spin_unlock_irq(&current->sighand->siglock);
-+
-+	regs->d0 = -EINTR;
-+	while (1) {
-+		current->state = TASK_INTERRUPTIBLE;
-+		schedule();
-+		if (do_signal(&saveset, regs))
-+			return -EINTR;
-+	}
-+}
-+
-+asmlinkage int
-+do_rt_sigsuspend(struct pt_regs *regs)
-+{
-+	sigset_t __user *unewset = (sigset_t __user *)regs->d1;
-+	size_t sigsetsize = (size_t)regs->d2;
-+	sigset_t saveset, newset;
-+
-+	/* XXX: Don't preclude handling different sized sigset_t's.  */
-+	if (sigsetsize != sizeof(sigset_t))
-+		return -EINVAL;
-+
-+	if (copy_from_user(&newset, unewset, sizeof(newset)))
-+		return -EFAULT;
-+	sigdelsetmask(&newset, ~_BLOCKABLE);
-+
-+	spin_lock_irq(&current->sighand->siglock);
-+	saveset = current->blocked;
-+	current->blocked = newset;
-+	recalc_sigpending();
-+	spin_unlock_irq(&current->sighand->siglock);
-+
-+	regs->d0 = -EINTR;
-+	while (1) {
-+		current->state = TASK_INTERRUPTIBLE;
-+		schedule();
-+		if (do_signal(&saveset, regs))
-+			return -EINTR;
-+	}
-+}
-+
-+asmlinkage int
-+sys_sigaction(int sig, const struct old_sigaction __user *act,
-+	      struct old_sigaction __user *oact)
-+{
-+	struct k_sigaction new_ka, old_ka;
-+	int ret;
-+
-+	if (act) {
-+		old_sigset_t mask;
-+		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-+		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-+		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
-+			return -EFAULT;
-+		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
-+		__get_user(mask, &act->sa_mask);
-+		siginitset(&new_ka.sa.sa_mask, mask);
-+	}
-+
-+	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-+
-+	if (!ret && oact) {
-+		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-+		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-+		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
-+			return -EFAULT;
-+		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-+		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-+	}
-+
-+	return ret;
-+}
-+
-+asmlinkage int
-+sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
-+{
-+	return do_sigaltstack(uss, uoss, rdusp());
-+}
-+
-+
-+/*
-+ * Do a signal return; undo the signal stack.
-+ *
-+ * Keep the return code on the stack quadword aligned!
-+ * That makes the cache flush below easier.
-+ */
-+
-+struct sigframe
-+{
-+	char __user *pretcode;
-+	int sig;
-+	int code;
-+	struct sigcontext __user *psc;
-+	char retcode[16];
-+	unsigned long extramask[_NSIG_WORDS-1];
-+	struct sigcontext sc;
-+};
-+
-+struct rt_sigframe
-+{
-+	char __user *pretcode;
-+	int sig;
-+	struct siginfo __user *pinfo;
-+	void __user *puc;
-+	char retcode[16];
-+	struct siginfo info;
-+	struct ucontext uc;
-+};
-+
-+#define FPCONTEXT_SIZE	216
-+#define uc_fpstate	uc_filler[0]
-+#define uc_formatvec	uc_filler[FPCONTEXT_SIZE/4]
-+#define uc_extra	uc_filler[FPCONTEXT_SIZE/4+1]
-+
-+#ifdef CONFIG_FPU
-+static unsigned char fpu_version; /* version num of fpu, set by setup_frame */
-+
-+static inline int restore_fpu_state(struct sigcontext *sc)
-+{
-+	int err = 1;
-+
-+	if (FPU_IS_EMU) {
-+	    /* restore registers */
-+	    memcpy(current->thread.fpcntl, sc->sc_fpcntl, 12);
-+	    memcpy(current->thread.fp, sc->sc_fpregs, 24);
-+	    return 0;
-+	}
-+
-+	if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) {
-+	    /* Verify the frame format.  */
-+	    if (!CPU_IS_060 && (sc->sc_fpstate[0] != fpu_version))
-+		goto out;
-+	    if (CPU_IS_020_OR_030) {
-+		if (m68k_fputype & FPU_68881 &&
-+		    !(sc->sc_fpstate[1] == 0x18 || sc->sc_fpstate[1] == 0xb4))
-+		    goto out;
-+		if (m68k_fputype & FPU_68882 &&
-+		    !(sc->sc_fpstate[1] == 0x38 || sc->sc_fpstate[1] == 0xd4))
-+		    goto out;
-+	    } else if (CPU_IS_040) {
-+		if (!(sc->sc_fpstate[1] == 0x00 ||
-+		      sc->sc_fpstate[1] == 0x28 ||
-+		      sc->sc_fpstate[1] == 0x60))
-+		    goto out;
-+	    } else if (CPU_IS_060) {
-+		if (!(sc->sc_fpstate[3] == 0x00 ||
-+		      sc->sc_fpstate[3] == 0x60 ||
-+		      sc->sc_fpstate[3] == 0xe0))
-+		    goto out;
-+	    } else
-+		goto out;
-+
-+	}
-+	err = 0;
-+
-+out:
-+	return err;
-+}
-+
-+static inline int rt_restore_fpu_state(struct ucontext __user *uc)
-+{
-+	unsigned char fpstate[FPCONTEXT_SIZE];
-+	int context_size = CPU_IS_060 ? 8 : 0;
-+	fpregset_t fpregs;
-+	int err = 1;
-+
-+	if (FPU_IS_EMU) {
-+		/* restore fpu control register */
-+		if (__copy_from_user(current->thread.fpcntl,
-+				uc->uc_mcontext.fpregs.f_fpcntl, 12))
-+			goto out;
-+		/* restore all other fpu register */
-+		if (__copy_from_user(current->thread.fp,
-+				uc->uc_mcontext.fpregs.f_fpregs, 96))
-+			goto out;
-+		return 0;
-+	}
-+
-+	if (__get_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate))
-+		goto out;
-+	if (CPU_IS_060 ? fpstate[2] : fpstate[0]) {
-+		if (!CPU_IS_060)
-+			context_size = fpstate[1];
-+		/* Verify the frame format.  */
-+		if (!CPU_IS_060 && (fpstate[0] != fpu_version))
-+			goto out;
-+		if (CPU_IS_020_OR_030) {
-+			if (m68k_fputype & FPU_68881 &&
-+			    !(context_size == 0x18 || context_size == 0xb4))
-+				goto out;
-+			if (m68k_fputype & FPU_68882 &&
-+			    !(context_size == 0x38 || context_size == 0xd4))
-+				goto out;
-+		} else if (CPU_IS_040) {
-+			if (!(context_size == 0x00 ||
-+			      context_size == 0x28 ||
-+			      context_size == 0x60))
-+				goto out;
-+		} else if (CPU_IS_060) {
-+			if (!(fpstate[3] == 0x00 ||
-+			      fpstate[3] == 0x60 ||
-+			      fpstate[3] == 0xe0))
-+				goto out;
-+		} else
-+			goto out;
-+		if (__copy_from_user(&fpregs, &uc->uc_mcontext.fpregs,
-+				     sizeof(fpregs)))
-+			goto out;
-+	}
-+	if (context_size &&
-+	    __copy_from_user(fpstate + 4, (long __user *)&uc->uc_fpstate + 1,
-+			     context_size))
-+		goto out;
-+	err = 0;
-+
-+out:
-+	return err;
-+}
-+#endif
-+
-+static inline int
-+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *usc,
-+	void __user *fp, int *pd0)
-+{
-+	int fsize, formatvec;
-+	struct sigcontext context;
-+	int err = 0;
-+
-+	/* get previous context */
-+	if (copy_from_user(&context, usc, sizeof(context)))
-+		goto badframe;
-+
-+	/* restore passed registers */
-+	regs->d1 = context.sc_d1;
-+	regs->a0 = context.sc_a0;
-+	regs->a1 = context.sc_a1;
-+	regs->sr = (regs->sr & 0xff00) | (context.sc_sr & 0xff);
-+	regs->pc = context.sc_pc;
-+	regs->orig_d0 = -1;		/* disable syscall checks */
-+	wrusp(context.sc_usp);
-+	formatvec = context.sc_formatvec;
-+	regs->format = formatvec >> 12;
-+	regs->vector = formatvec & 0xfff;
-+
-+#ifdef CONFIG_FPU
-+	err = restore_fpu_state(&context);
-+#endif
-+
-+	fsize = frame_extra_sizes[regs->format];
-+	if (fsize < 0) {
-+		/*
-+		 * user process trying to return with weird frame format
-+		 */
-+#ifdef DEBUG
-+		printk(KERN_DEBUG "user process returning with weird \
-+			frame format\n");
-+#endif
-+		goto badframe;
-+	}
-+
-+	/* OK.	Make room on the supervisor stack for the extra junk,
-+	 * if necessary.
-+	 */
-+
-+	{
-+		struct switch_stack *sw = (struct switch_stack *)regs - 1;
-+		regs->d0 = context.sc_d0;
-+#define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack))
-+		__asm__ __volatile__
-+			("   movel %0,%/sp\n\t"
-+			 "   bra ret_from_signal\n"
-+			 "4:\n"
-+			 ".section __ex_table,\"a\"\n"
-+			 "   .align 4\n"
-+			 "   .long 2b,4b\n"
-+			 ".previous"
-+			 : /* no outputs, it doesn't ever return */
-+			 : "a" (sw), "d" (fsize), "d" (frame_offset/4-1),
-+			   "n" (frame_offset), "a" (fp)
-+			 : "a0");
-+#undef frame_offset
-+		/*
-+		 * If we ever get here an exception occurred while
-+		 * building the above stack-frame.
-+		 */
-+		goto badframe;
-+	}
-+
-+	*pd0 = context.sc_d0;
-+	return err;
-+
-+badframe:
-+	return 1;
-+}
-+
-+static inline int
-+rt_restore_ucontext(struct pt_regs *regs, struct switch_stack *sw,
-+		    struct ucontext __user *uc, int *pd0)
-+{
-+	int fsize, temp;
-+	greg_t __user *gregs = uc->uc_mcontext.gregs;
-+	unsigned long usp;
-+	int err;
-+
-+	err = __get_user(temp, &uc->uc_mcontext.version);
-+	if (temp != MCONTEXT_VERSION)
-+		goto badframe;
-+	/* restore passed registers */
-+	err |= __get_user(regs->d0, &gregs[0]);
-+	err |= __get_user(regs->d1, &gregs[1]);
-+	err |= __get_user(regs->d2, &gregs[2]);
-+	err |= __get_user(regs->d3, &gregs[3]);
-+	err |= __get_user(regs->d4, &gregs[4]);
-+	err |= __get_user(regs->d5, &gregs[5]);
-+	err |= __get_user(sw->d6, &gregs[6]);
-+	err |= __get_user(sw->d7, &gregs[7]);
-+	err |= __get_user(regs->a0, &gregs[8]);
-+	err |= __get_user(regs->a1, &gregs[9]);
-+	err |= __get_user(regs->a2, &gregs[10]);
-+	err |= __get_user(sw->a3, &gregs[11]);
-+	err |= __get_user(sw->a4, &gregs[12]);
-+	err |= __get_user(sw->a5, &gregs[13]);
-+	err |= __get_user(sw->a6, &gregs[14]);
-+	err |= __get_user(usp, &gregs[15]);
-+	wrusp(usp);
-+	err |= __get_user(regs->pc, &gregs[16]);
-+	err |= __get_user(temp, &gregs[17]);
-+	regs->sr = (regs->sr & 0xff00) | (temp & 0xff);
-+	regs->orig_d0 = -1;		/* disable syscall checks */
-+	err |= __get_user(temp, &uc->uc_formatvec);
-+	regs->format = temp >> 12;
-+	regs->vector = temp & 0xfff;
-+
-+#ifdef CONFIG_FPU
-+	err |= rt_restore_fpu_state(uc);
-+#endif
-+
-+	if (do_sigaltstack(&uc->uc_stack, NULL, usp) == -EFAULT)
-+		goto badframe;
-+
-+	fsize = frame_extra_sizes[regs->format];
-+	if (fsize < 0) {
-+		/*
-+		 * user process trying to return with weird frame format
-+		 */
-+#ifdef DEBUG
-+		printk(KERN_DEBUG "user process returning with weird \
-+			frame format\n");
-+#endif
-+		goto badframe;
-+	}
-+
-+	/* OK.	Make room on the supervisor stack for the extra junk,
-+	 * if necessary.
-+	 */
-+
-+	{
-+#define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack))
-+		__asm__ __volatile__
-+			("   movel %0,%/sp\n\t"
-+			 "   bra ret_from_signal\n"
-+			 "4:\n"
-+			 ".section __ex_table,\"a\"\n"
-+			 "   .align 4\n"
-+			 "   .long 2b,4b\n"
-+			 ".previous"
-+			 : /* no outputs, it doesn't ever return */
-+			 : "a" (sw), "d" (fsize), "d" (frame_offset/4-1),
-+			   "n" (frame_offset), "a" (&uc->uc_extra)
-+			 : "a0");
-+#undef frame_offset
-+		/*
-+		 * If we ever get here an exception occurred while
-+		 * building the above stack-frame.
-+		 */
-+		goto badframe;
-+	}
-+
-+	*pd0 = regs->d0;
-+	return err;
-+
-+badframe:
-+	return 1;
-+}
-+
-+asmlinkage int do_sigreturn(unsigned long __unused)
-+{
-+	struct switch_stack *sw = (struct switch_stack *) &__unused;
-+	struct pt_regs *regs = (struct pt_regs *) (sw + 1);
-+	unsigned long usp = rdusp();
-+	struct sigframe __user *frame = (struct sigframe __user *)(usp - 4);
-+	sigset_t set;
-+	int d0;
-+
-+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-+		goto badframe;
-+	if (__get_user(set.sig[0], &frame->sc.sc_mask) ||
-+	    (_NSIG_WORDS > 1 &&
-+	     __copy_from_user(&set.sig[1], &frame->extramask,
-+			      sizeof(frame->extramask))))
-+		goto badframe;
-+
-+	sigdelsetmask(&set, ~_BLOCKABLE);
-+	spin_lock_irq(&current->sighand->siglock);
-+	current->blocked = set;
-+	recalc_sigpending();
-+	spin_unlock_irq(&current->sighand->siglock);
-+
-+	if (restore_sigcontext(regs, &frame->sc, frame + 1, &d0))
-+		goto badframe;
-+	return d0;
-+
-+badframe:
-+	force_sig(SIGSEGV, current);
-+	return 0;
-+}
-+
-+asmlinkage int do_rt_sigreturn(unsigned long __unused)
-+{
-+	struct switch_stack *sw = (struct switch_stack *) &__unused;
-+	struct pt_regs *regs = (struct pt_regs *) (sw + 1);
-+	unsigned long usp = rdusp();
-+	struct rt_sigframe __user *frame =
-+		(struct rt_sigframe __user *)(usp - 4);
-+	sigset_t set;
-+	int d0;
-+
-+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-+		goto badframe;
-+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-+		goto badframe;
-+
-+	sigdelsetmask(&set, ~_BLOCKABLE);
-+	spin_lock_irq(&current->sighand->siglock);
-+	current->blocked = set;
-+	recalc_sigpending();
-+	spin_unlock_irq(&current->sighand->siglock);
-+
-+	if (rt_restore_ucontext(regs, sw, &frame->uc, &d0))
-+		goto badframe;
-+	return d0;
-+
-+badframe:
-+	force_sig(SIGSEGV, current);
-+	return 0;
-+}
-+
-+#ifdef CONFIG_FPU
-+/*
-+ * Set up a signal frame.
-+ */
-+
-+static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs)
-+{
-+	if (FPU_IS_EMU) {
-+		/* save registers */
-+		memcpy(sc->sc_fpcntl, current->thread.fpcntl, 12);
-+		memcpy(sc->sc_fpregs, current->thread.fp, 24);
-+		return;
-+	}
-+}
-+
-+static inline int rt_save_fpu_state(struct ucontext __user *uc,
-+	struct pt_regs *regs)
-+{
-+	int err = 0;
-+
-+	if (FPU_IS_EMU) {
-+		/* save fpu control register */
-+		err |= copy_to_user(uc->uc_mcontext.fpregs.f_fpcntl,
-+				current->thread.fpcntl, 12);
-+		/* save all other fpu register */
-+		err |= copy_to_user(uc->uc_mcontext.fpregs.f_fpregs,
-+				current->thread.fp, 96);
-+		return err;
-+	}
-+
-+	return err;
-+}
-+#endif
-+
-+static void setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
-+			     unsigned long mask)
-+{
-+	sc->sc_mask = mask;
-+	sc->sc_usp = rdusp();
-+	sc->sc_d0 = regs->d0;
-+	sc->sc_d1 = regs->d1;
-+	sc->sc_a0 = regs->a0;
-+	sc->sc_a1 = regs->a1;
-+	sc->sc_sr = regs->sr;
-+	sc->sc_pc = regs->pc;
-+	sc->sc_formatvec = regs->format << 12 | regs->vector;
-+#ifdef CONFIG_FPU
-+	save_fpu_state(sc, regs);
-+#endif
-+}
-+
-+static inline int rt_setup_ucontext(struct ucontext __user *uc,
-+	struct pt_regs *regs)
-+{
-+	struct switch_stack *sw = (struct switch_stack *)regs - 1;
-+	greg_t __user *gregs = uc->uc_mcontext.gregs;
-+	int err = 0;
-+
-+	err |= __put_user(MCONTEXT_VERSION, &uc->uc_mcontext.version);
-+	err |= __put_user(regs->d0, &gregs[0]);
-+	err |= __put_user(regs->d1, &gregs[1]);
-+	err |= __put_user(regs->d2, &gregs[2]);
-+	err |= __put_user(regs->d3, &gregs[3]);
-+	err |= __put_user(regs->d4, &gregs[4]);
-+	err |= __put_user(regs->d5, &gregs[5]);
-+	err |= __put_user(sw->d6, &gregs[6]);
-+	err |= __put_user(sw->d7, &gregs[7]);
-+	err |= __put_user(regs->a0, &gregs[8]);
-+	err |= __put_user(regs->a1, &gregs[9]);
-+	err |= __put_user(regs->a2, &gregs[10]);
-+	err |= __put_user(sw->a3, &gregs[11]);
-+	err |= __put_user(sw->a4, &gregs[12]);
-+	err |= __put_user(sw->a5, &gregs[13]);
-+	err |= __put_user(sw->a6, &gregs[14]);
-+	err |= __put_user(rdusp(), &gregs[15]);
-+	err |= __put_user(regs->pc, &gregs[16]);
-+	err |= __put_user(regs->sr, &gregs[17]);
-+	err |= __put_user((regs->format << 12) | regs->vector,
-+			  &uc->uc_formatvec);
-+#ifdef CONFIG_FPU
-+	err |= rt_save_fpu_state(uc, regs);
-+#endif
-+	return err;
-+}
-+
-+static inline void push_cache(unsigned long vaddr)
-+{
-+#if 0 
-+// JKM -- need to add into the old cpushl cache stuff
-+	cf_cache_push(__pa(vaddr), 8);
-+#endif
-+}
-+
-+static inline void __user *
-+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
-+{
-+	unsigned long usp;
-+
-+	/* Default to using normal stack.  */
-+	usp = rdusp();
-+
-+	/* This is the X/Open sanctioned signal stack switching.  */
-+	if (ka->sa.sa_flags & SA_ONSTACK) {
-+		if (!sas_ss_flags(usp))
-+			usp = current->sas_ss_sp + current->sas_ss_size;
-+	}
-+	return (void __user *)((usp - frame_size) & -8UL);
-+}
-+
-+static void setup_frame(int sig, struct k_sigaction *ka,
-+			 sigset_t *set, struct pt_regs *regs)
-+{
-+	struct sigframe __user *frame;
-+	int fsize = frame_extra_sizes[regs->format];
-+	struct sigcontext context;
-+	int err = 0;
-+
-+	if (fsize < 0) {
-+#ifdef DEBUG
-+		printk(KERN_DEBUG "setup_frame: Unknown frame format %#x\n",
-+			regs->format);
-+#endif
-+		goto give_sigsegv;
-+	}
-+
-+	frame = get_sigframe(ka, regs, sizeof(*frame));
-+
-+	err |= __put_user((current_thread_info()->exec_domain
-+			&& current_thread_info()->exec_domain->signal_invmap
-+			&& sig < 32
-+			? current_thread_info()->exec_domain->signal_invmap[sig]
-+			: sig),
-+			&frame->sig);
-+
-+	err |= __put_user(regs->vector, &frame->code);
-+	err |= __put_user(&frame->sc, &frame->psc);
-+
-+	if (_NSIG_WORDS > 1)
-+		err |= copy_to_user(frame->extramask, &set->sig[1],
-+				    sizeof(frame->extramask));
-+
-+	setup_sigcontext(&context, regs, set->sig[0]);
-+	err |= copy_to_user(&frame->sc, &context, sizeof(context));
-+
-+	/* Set up to return from userspace.  */
-+	err |= __put_user(frame->retcode, &frame->pretcode);
-+	/* moveq #,d0; trap #0 */
-+	err |= __put_user(0x70004e40 + (__NR_sigreturn << 16),
-+			  (long __user *)(frame->retcode));
-+
-+	if (err)
-+		goto give_sigsegv;
-+
-+	push_cache((unsigned long) &frame->retcode);
-+
-+	/* Set up registers for signal handler */
-+	wrusp((unsigned long) frame);
-+	regs->pc = (unsigned long) ka->sa.sa_handler;
-+
-+adjust_stack:
-+	/* Prepare to skip over the extra stuff in the exception frame.  */
-+	if (regs->stkadj) {
-+		struct pt_regs *tregs =
-+			(struct pt_regs *)((ulong)regs + regs->stkadj);
-+#ifdef DEBUG
-+		printk(KERN_DEBUG "Performing stackadjust=%04x\n",
-+			regs->stkadj);
-+#endif
-+		/* This must be copied with decreasing addresses to
-+		   handle overlaps.  */
-+		tregs->vector = 0;
-+		tregs->format = 0;
-+		tregs->pc = regs->pc;
-+		tregs->sr = regs->sr;
-+	}
-+	return;
-+
-+give_sigsegv:
-+	force_sigsegv(sig, current);
-+	goto adjust_stack;
-+}
-+
-+static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-+	sigset_t *set, struct pt_regs *regs)
-+{
-+	struct rt_sigframe __user *frame;
-+	int fsize = frame_extra_sizes[regs->format];
-+	int err = 0;
-+
-+	if (fsize < 0) {
-+#ifdef DEBUG
-+		printk(KERN_DEBUG "setup_frame: Unknown frame format %#x\n",
-+			regs->format);
-+#endif
-+		goto give_sigsegv;
-+	}
-+
-+	frame = get_sigframe(ka, regs, sizeof(*frame));
-+
-+	if (fsize) {
-+		err |= copy_to_user(&frame->uc.uc_extra, regs + 1, fsize);
-+		regs->stkadj = fsize;
-+	}
-+
-+	err |= __put_user((current_thread_info()->exec_domain
-+			&& current_thread_info()->exec_domain->signal_invmap
-+			&& sig < 32
-+			? current_thread_info()->exec_domain->signal_invmap[sig]
-+			: sig),
-+			&frame->sig);
-+	err |= __put_user(&frame->info, &frame->pinfo);
-+	err |= __put_user(&frame->uc, &frame->puc);
-+	err |= copy_siginfo_to_user(&frame->info, info);
-+
-+	/* Create the ucontext.  */
-+	err |= __put_user(0, &frame->uc.uc_flags);
-+	err |= __put_user(NULL, &frame->uc.uc_link);
-+	err |= __put_user((void __user *)current->sas_ss_sp,
-+			  &frame->uc.uc_stack.ss_sp);
-+	err |= __put_user(sas_ss_flags(rdusp()),
-+			  &frame->uc.uc_stack.ss_flags);
-+	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-+	err |= rt_setup_ucontext(&frame->uc, regs);
-+	err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-+
-+	/* Set up to return from userspace.  */
-+	err |= __put_user(frame->retcode, &frame->pretcode);
-+
-+	/* moveq #,d0; andi.l #,D0; trap #0 */
-+	err |= __put_user(0x70AD0280, (long *)(frame->retcode + 0));
-+	err |= __put_user(0x000000ff, (long *)(frame->retcode + 4));
-+	err |= __put_user(0x4e400000, (long *)(frame->retcode + 8));
-+
-+	if (err)
-+		goto give_sigsegv;
-+
-+	push_cache((unsigned long) &frame->retcode);
-+
-+	/* Set up registers for signal handler */
-+	wrusp((unsigned long) frame);
-+	regs->pc = (unsigned long) ka->sa.sa_handler;
-+
-+adjust_stack:
-+	/* Prepare to skip over the extra stuff in the exception frame.  */
-+	if (regs->stkadj) {
-+		struct pt_regs *tregs =
-+			(struct pt_regs *)((ulong)regs + regs->stkadj);
-+#ifdef DEBUG
-+		printk(KERN_DEBUG "Performing stackadjust=%04x\n",
-+			regs->stkadj);
-+#endif
-+		/* This must be copied with decreasing addresses to
-+		   handle overlaps.  */
-+		tregs->vector = 0;
-+		tregs->format = 0;
-+		tregs->pc = regs->pc;
-+		tregs->sr = regs->sr;
-+	}
-+	return;
-+
-+give_sigsegv:
-+	force_sigsegv(sig, current);
-+	goto adjust_stack;
-+}
-+
-+static inline void
-+handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
-+{
-+	switch (regs->d0) {
-+	case -ERESTARTNOHAND:
-+		if (!has_handler)
-+			goto do_restart;
-+		regs->d0 = -EINTR;
-+		break;
-+
-+	case -ERESTARTSYS:
-+		if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
-+			regs->d0 = -EINTR;
-+			break;
-+		}
-+	/* fallthrough */
-+	case -ERESTARTNOINTR:
-+do_restart:
-+		regs->d0 = regs->orig_d0;
-+		regs->pc -= 2;
-+		break;
-+	}
-+}
-+
-+/*
-+ * OK, we're invoking a handler
-+ */
-+static void
-+handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
-+	      sigset_t *oldset, struct pt_regs *regs)
-+{
-+	/* are we from a system call? */
-+	if (regs->orig_d0 >= 0)
-+		/* If so, check system call restarting.. */
-+		handle_restart(regs, ka, 1);
-+
-+	/* set up the stack frame */
-+	if (ka->sa.sa_flags & SA_SIGINFO)
-+		setup_rt_frame(sig, ka, info, oldset, regs);
-+	else
-+		setup_frame(sig, ka, oldset, regs);
-+
-+	if (ka->sa.sa_flags & SA_ONESHOT)
-+		ka->sa.sa_handler = SIG_DFL;
-+
-+	spin_lock_irq(&current->sighand->siglock);
-+	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-+	if (!(ka->sa.sa_flags & SA_NODEFER))
-+		sigaddset(&current->blocked, sig);
-+	recalc_sigpending();
-+	spin_unlock_irq(&current->sighand->siglock);
-+}
-+
-+/*
-+ * Note that 'init' is a special process: it doesn't get signals it doesn't
-+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
-+ * mistake.
-+ */
-+asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs)
-+{
-+	siginfo_t info;
-+	struct k_sigaction ka;
-+	int signr;
-+
-+	current->thread.esp0 = (unsigned long) regs;
-+
-+	if (!oldset)
-+		oldset = &current->blocked;
-+
-+	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-+	if (signr > 0) {
-+		/* Whee!  Actually deliver the signal.  */
-+		handle_signal(signr, &ka, &info, oldset, regs);
-+		return 1;
-+	}
-+
-+	/* Did we come from a system call? */
-+	if (regs->orig_d0 >= 0)
-+		/* Restart the system call - no handlers present */
-+		handle_restart(regs, NULL, 0);
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/arch/m68k/coldfire/traps.c
-@@ -0,0 +1,455 @@
-+/*
-+ *  linux/arch/m68knommu/kernel/traps.c
-+ *
-+ *  Copyright (C) 1993, 1994 by Hamish Macdonald
-+ *
-+ *  68040 fixes by Michael Rausch
-+ *  68040 fixes by Martin Apel
-+ *  68060 fixes by Roman Hodek
-+ *  68060 fixes by Jesper Skov
-+ *  Coldfire fixes by Kurt Mahan
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
-+/*
-+ * Sets up all exception vectors
-+ */
-+#include <linux/sched.h>
-+#include <linux/signal.h>
-+#include <linux/kernel.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/a.out.h>
-+#include <linux/user.h>
-+#include <linux/string.h>
-+#include <linux/linkage.h>
-+#include <linux/init.h>
-+#include <linux/ptrace.h>
-+#include <linux/kallsyms.h>
-+
-+#include <asm/setup.h>
-+#include <asm/fpu.h>
-+#include <asm/system.h>
-+#include <asm/uaccess.h>
-+#include <asm/traps.h>
-+#include <asm/pgtable.h>
-+#include <asm/machdep.h>
-+#include <asm/siginfo.h>
-+
-+static char const * const vec_names[] = {
-+	"RESET SP", "RESET PC", "BUS ERROR", "ADDRESS ERROR",
-+	"ILLEGAL INSTRUCTION", "ZERO DIVIDE", "CHK", "TRAPcc",
-+	"PRIVILEGE VIOLATION", "TRACE", "LINE 1010", "LINE 1111",
-+	"UNASSIGNED RESERVED 12", "COPROCESSOR PROTOCOL VIOLATION",
-+	"FORMAT ERROR", "UNINITIALIZED INTERRUPT",
-+	"UNASSIGNED RESERVED 16", "UNASSIGNED RESERVED 17",
-+	"UNASSIGNED RESERVED 18", "UNASSIGNED RESERVED 19",
-+	"UNASSIGNED RESERVED 20", "UNASSIGNED RESERVED 21",
-+	"UNASSIGNED RESERVED 22", "UNASSIGNED RESERVED 23",
-+	"SPURIOUS INTERRUPT", "LEVEL 1 INT", "LEVEL 2 INT", "LEVEL 3 INT",
-+	"LEVEL 4 INT", "LEVEL 5 INT", "LEVEL 6 INT", "LEVEL 7 INT",
-+	"SYSCALL", "TRAP #1", "TRAP #2", "TRAP #3",
-+	"TRAP #4", "TRAP #5", "TRAP #6", "TRAP #7",
-+	"TRAP #8", "TRAP #9", "TRAP #10", "TRAP #11",
-+	"TRAP #12", "TRAP #13", "TRAP #14", "TRAP #15",
-+	"FPCP BSUN", "FPCP INEXACT", "FPCP DIV BY 0", "FPCP UNDERFLOW",
-+	"FPCP OPERAND ERROR", "FPCP OVERFLOW", "FPCP SNAN",
-+	"FPCP UNSUPPORTED OPERATION",
-+	"MMU CONFIGURATION ERROR"
-+};
-+
-+asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
-+			     unsigned long error_code);
-+asmlinkage void trap_c(struct frame *fp);
-+extern void __init coldfire_trap_init(void);
-+
-+void __init trap_init(void)
-+{
-+	coldfire_trap_init();
-+}
-+
-+/* The following table converts the FS encoding of a ColdFire
-+   exception stack frame into the error_code value needed by
-+   do_fault. */
-+
-+static const unsigned char fs_err_code[] = {
-+	0,  /* 0000 */
-+	0,  /* 0001 */
-+	0,  /* 0010 */
-+	0,  /* 0011 */
-+	1,  /* 0100 */
-+	0,  /* 0101 */
-+	0,  /* 0110 */
-+	0,  /* 0111 */
-+	2,  /* 1000 */
-+	3,  /* 1001 */
-+	2,  /* 1010 */
-+	0,  /* 1011 */
-+	1,  /* 1100 */
-+	1,  /* 1101 */
-+	0,  /* 1110 */
-+	0   /* 1111 */
-+};
-+
-+#ifdef DEBUG
-+static const char *fs_err_msg[16] = {
-+	"Normal",
-+	"Reserved",
-+	"Interrupt during debug service routine",
-+	"Reserved",
-+	"X Protection",
-+	"TLB X miss (opword)",
-+	"TLB X miss (ext. word)",
-+	"IFP in emulator mode",
-+	"W Protection",
-+	"Write error",
-+	"TLB W miss",
-+	"Reserved",
-+	"R Protection",
-+	"R/RMW Protection",
-+	"TLB R miss",
-+	"OEP in emulator mode",
-+};
-+#endif
-+
-+static inline void access_errorCF(struct frame *fp)
-+{
-+	unsigned long int mmusr, complainingAddress;
-+	unsigned int err_code, fs;
-+	int need_page_fault;
-+
-+	mmusr = fp->ptregs.mmusr;
-+	complainingAddress = fp->ptregs.mmuar;
-+#ifdef DEBUG
-+	printk(KERN_DEBUG "pc %#lx, mmusr %#lx, complainingAddress %#lx\n", \
-+		fp->ptregs.pc, mmusr, complainingAddress);
-+#endif
-+
-+	/*
-+	 * error_code:
-+	 *	bit 0 == 0 means no page found, 1 means protection fault
-+	 *	bit 1 == 0 means read, 1 means write
-+	 */
-+
-+	fs = (fp->ptregs.fs2 << 2) | fp->ptregs.fs1;
-+	switch (fs) {
-+	case  5:  /* 0101 TLB opword X miss */
-+		need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 0);
-+		complainingAddress = fp->ptregs.pc;
-+		break;
-+	case  6:  /* 0110 TLB extension word X miss */
-+		need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 1);
-+		complainingAddress = fp->ptregs.pc + sizeof(long);
-+		break;
-+	case 10:  /* 1010 TLB W miss */
-+		need_page_fault = cf_tlb_miss(&fp->ptregs, 1, 1, 0);
-+		break;
-+	case 14: /* 1110 TLB R miss */
-+		need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 1, 0);
-+		break;
-+	default:
-+		/* 0000 Normal  */
-+		/* 0001 Reserved */
-+		/* 0010 Interrupt during debug service routine */
-+		/* 0011 Reserved */
-+		/* 0100 X Protection */
-+		/* 0111 IFP in emulator mode */
-+		/* 1000 W Protection*/
-+		/* 1001 Write error*/
-+		/* 1011 Reserved*/
-+		/* 1100 R Protection*/
-+		/* 1101 R Protection*/
-+		/* 1111 OEP in emulator mode*/
-+		need_page_fault = 1;
-+		break;
-+	}
-+
-+	if (need_page_fault) {
-+		err_code = fs_err_code[fs];
-+		if ((fs == 13) && (mmusr & MMUSR_WF)) /* rd-mod-wr access */
-+			err_code |= 2; /* bit1 - write, bit0 - protection */
-+		do_page_fault(&fp->ptregs, complainingAddress, err_code);
-+	}
-+}
-+
-+void die_if_kernel(char *str, struct pt_regs *fp, int nr)
-+{
-+	if (!(fp->sr & PS_S))
-+		return;
-+
-+	console_verbose();
-+	printk(KERN_EMERG "%s: %08x\n", str, nr);
-+	printk(KERN_EMERG "PC: [<%08lx>]", fp->pc);
-+	print_symbol(" %s", fp->pc);
-+	printk(KERN_EMERG "\nSR: %04x  SP: %p  a2: %08lx\n",
-+	       fp->sr, fp, fp->a2);
-+	printk(KERN_EMERG "d0: %08lx    d1: %08lx    d2: %08lx    d3: %08lx\n",
-+	       fp->d0, fp->d1, fp->d2, fp->d3);
-+	printk(KERN_EMERG "d4: %08lx    d5: %08lx    a0: %08lx    a1: %08lx\n",
-+	       fp->d4, fp->d5, fp->a0, fp->a1);
-+
-+	printk(KERN_EMERG "Process %s (pid: %d, stackpage=%08lx)\n",
-+		current->comm, current->pid, PAGE_SIZE+(unsigned long)current);
-+	show_stack(NULL, (unsigned long *)fp);
-+	do_exit(SIGSEGV);
-+}
-+
-+asmlinkage void buserr_c(struct frame *fp)
-+{
-+	unsigned int fs;
-+
-+	/* Only set esp0 if coming from user mode */
-+	if (user_mode(&fp->ptregs))
-+		current->thread.esp0 = (unsigned long) fp;
-+
-+	fs = (fp->ptregs.fs2 << 2) | fp->ptregs.fs1;
-+#if defined(DEBUG)
-+	printk(KERN_DEBUG "*** Bus Error *** (%x)%s\n", fs,
-+		fs_err_msg[fs & 0xf]);
-+#endif
-+	switch (fs) {
-+	case 0x5:
-+	case 0x6:
-+	case 0x7:
-+	case 0x9:
-+	case 0xa:
-+	case 0xd:
-+	case 0xe:
-+	case 0xf:
-+		access_errorCF(fp);
-+		break;
-+	default:
-+		die_if_kernel("bad frame format", &fp->ptregs, 0);
-+#if defined(DEBUG)
-+		printk(KERN_DEBUG "Unknown SIGSEGV - 4\n");
-+#endif
-+		force_sig(SIGSEGV, current);
-+	}
-+}
-+
-+
-+int kstack_depth_to_print = 48;
-+
-+void show_stack(struct task_struct *task, unsigned long *stack)
-+{
-+	unsigned long *endstack, addr, symaddr;
-+	extern char _start, _etext;
-+	int i;
-+
-+	if (!stack) {
-+		if (task)
-+			stack = (unsigned long *)task->thread.ksp;
-+		else
-+			stack = (unsigned long *)&stack;
-+	}
-+
-+	addr = (unsigned long) stack;
-+	endstack = (unsigned long *) PAGE_ALIGN(addr);
-+
-+	printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack);
-+	for (i = 0; i < kstack_depth_to_print; i++) {
-+		if (stack + 1 > endstack)
-+			break;
-+		if (i % 8 == 0)
-+			printk("\n" KERN_EMERG "       ");
-+		symaddr = *stack;
-+		printk(KERN_EMERG " %08lx", *stack++);
-+		if ((symaddr >= 0xc0000000) && (symaddr < 0xc1000000))
-+			print_symbol("(%s)", symaddr);
-+	}
-+	printk("\n");
-+
-+	printk(KERN_EMERG "Call Trace:");
-+	i = 0;
-+	while (stack + 1 <= endstack) {
-+		addr = *stack++;
-+		/*
-+		 * If the address is either in the text segment of the
-+		 * kernel, or in the region which contains vmalloc'ed
-+		 * memory, it *may* be the address of a calling
-+		 * routine; if so, print it so that someone tracing
-+		 * down the cause of the crash will be able to figure
-+		 * out the call path that was taken.
-+		 */
-+		if (((addr >= (unsigned long) &_start) &&
-+		     (addr <= (unsigned long) &_etext))) {
-+			if (i % 4 == 0)
-+				printk("\n" KERN_EMERG "       ");
-+			printk(KERN_EMERG " [<%08lx>]", addr);
-+			i++;
-+		}
-+	}
-+	printk("\n");
-+}
-+
-+void bad_super_trap(struct frame *fp)
-+{
-+	console_verbose();
-+	if (fp->ptregs.vector < sizeof(vec_names)/sizeof(vec_names[0]))
-+		printk(KERN_WARNING "*** %s ***   FORMAT=%X\n",
-+			vec_names[fp->ptregs.vector],
-+			fp->ptregs.format);
-+	else
-+		printk(KERN_WARNING "*** Exception %d ***   FORMAT=%X\n",
-+			fp->ptregs.vector,
-+			fp->ptregs.format);
-+	printk(KERN_WARNING "Current process id is %d\n", current->pid);
-+	die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0);
-+}
-+
-+asmlinkage void trap_c(struct frame *fp)
-+{
-+	int sig;
-+	siginfo_t info;
-+
-+	if (fp->ptregs.sr & PS_S) {
-+		if (fp->ptregs.vector == VEC_TRACE) {
-+			/* traced a trapping instruction */
-+			current->ptrace |= PT_DTRACE;
-+		} else
-+			bad_super_trap(fp);
-+		return;
-+	}
-+
-+	/* send the appropriate signal to the user program */
-+	switch (fp->ptregs.vector) {
-+	case VEC_ADDRERR:
-+		info.si_code = BUS_ADRALN;
-+		sig = SIGBUS;
-+		break;
-+	case VEC_ILLEGAL:
-+	case VEC_LINE10:
-+	case VEC_LINE11:
-+		info.si_code = ILL_ILLOPC;
-+		sig = SIGILL;
-+		break;
-+	case VEC_PRIV:
-+		info.si_code = ILL_PRVOPC;
-+		sig = SIGILL;
-+		break;
-+	case VEC_COPROC:
-+		info.si_code = ILL_COPROC;
-+		sig = SIGILL;
-+		break;
-+	case VEC_TRAP1: /* gdbserver breakpoint */
-+		fp->ptregs.pc -= 2;
-+		info.si_code = TRAP_TRACE;
-+		sig = SIGTRAP;
-+		break;
-+	case VEC_TRAP2:
-+	case VEC_TRAP3:
-+	case VEC_TRAP4:
-+	case VEC_TRAP5:
-+	case VEC_TRAP6:
-+	case VEC_TRAP7:
-+	case VEC_TRAP8:
-+	case VEC_TRAP9:
-+	case VEC_TRAP10:
-+	case VEC_TRAP11:
-+	case VEC_TRAP12:
-+	case VEC_TRAP13:
-+	case VEC_TRAP14:
-+		info.si_code = ILL_ILLTRP;
-+		sig = SIGILL;
-+		break;
-+	case VEC_FPBRUC:
-+	case VEC_FPOE:
-+	case VEC_FPNAN:
-+		info.si_code = FPE_FLTINV;
-+		sig = SIGFPE;
-+		break;
-+	case VEC_FPIR:
-+		info.si_code = FPE_FLTRES;
-+		sig = SIGFPE;
-+		break;
-+	case VEC_FPDIVZ:
-+		info.si_code = FPE_FLTDIV;
-+		sig = SIGFPE;
-+		break;
-+	case VEC_FPUNDER:
-+		info.si_code = FPE_FLTUND;
-+		sig = SIGFPE;
-+		break;
-+	case VEC_FPOVER:
-+		info.si_code = FPE_FLTOVF;
-+		sig = SIGFPE;
-+		break;
-+	case VEC_ZERODIV:
-+		info.si_code = FPE_INTDIV;
-+		sig = SIGFPE;
-+		break;
-+	case VEC_CHK:
-+	case VEC_TRAP:
-+		info.si_code = FPE_INTOVF;
-+		sig = SIGFPE;
-+		break;
-+	case VEC_TRACE:		/* ptrace single step */
-+		info.si_code = TRAP_TRACE;
-+		sig = SIGTRAP;
-+		break;
-+	case VEC_TRAP15:		/* breakpoint */
-+		info.si_code = TRAP_BRKPT;
-+		sig = SIGTRAP;
-+		break;
-+	default:
-+		info.si_code = ILL_ILLOPC;
-+		sig = SIGILL;
-+		break;
-+	}
-+	info.si_signo = sig;
-+	info.si_errno = 0;
-+	switch (fp->ptregs.format) {
-+	default:
-+		info.si_addr = (void *) fp->ptregs.pc;
-+		break;
-+	case 2:
-+		info.si_addr = (void *) fp->un.fmt2.iaddr;
-+		break;
-+	case 7:
-+		info.si_addr = (void *) fp->un.fmt7.effaddr;
-+		break;
-+	case 9:
-+		info.si_addr = (void *) fp->un.fmt9.iaddr;
-+		break;
-+	case 10:
-+		info.si_addr = (void *) fp->un.fmta.daddr;
-+		break;
-+	case 11:
-+		info.si_addr = (void *) fp->un.fmtb.daddr;
-+		break;
-+	}
-+	force_sig_info(sig, &info, current);
-+}
-+
-+asmlinkage void set_esp0(unsigned long ssp)
-+{
-+	current->thread.esp0 = ssp;
-+}
-+
-+/*
-+ * The architecture-independent backtrace generator
-+ */
-+void dump_stack(void)
-+{
-+	unsigned long stack;
-+
-+	show_stack(current, &stack);
-+}
-+EXPORT_SYMBOL(dump_stack);
-+
-+#ifdef CONFIG_M68KFPU_EMU
-+asmlinkage void fpemu_signal(int signal, int code, void *addr)
-+{
-+	siginfo_t info;
-+
-+	info.si_signo = signal;
-+	info.si_errno = 0;
-+	info.si_code = code;
-+	info.si_addr = addr;
-+	force_sig_info(signal, &info, current);
-+}
-+#endif
---- /dev/null
-+++ b/arch/m68k/coldfire/usb/Makefile
-@@ -0,0 +1,28 @@
-+#
-+# Makefile for the linux kernel.
-+#
-+
-+# Object file lists.
-+
-+ifneq ($(CONFIG_USB_EHCI_HCD),)
-+	obj-y	+= otg_host.o
-+endif
-+
-+ifneq ($(CONFIG_USB_GADGET_MCF5445X),)
-+	obj-y	+= otg_device.o
-+endif
-+
-+ifneq ($(strip $(CONFIG_USB_GADGET_MCF5445X) $(CONFIG_USB_EHCI_HCD)),)
-+	obj-y	+= otg_cmn.o
-+endif
-+
-+ifneq ($(CONFIG_USB_OTG),)
-+	obj-y	+= otg_otg.o
-+endif
-+
-+
-+# USB Transceiver driver:
-+ifneq ($(strip $(CONFIG_USB) $(CONFIG_USB_GADGET_MCF5445X)),)
-+	obj-y	+= xcvr.o
-+endif
-+
---- /dev/null
-+++ b/arch/m68k/coldfire/usb/otg_cmn.c
-@@ -0,0 +1,106 @@
-+/*
-+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+
-+/*
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/err.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/irq.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/usb/fsl_xcvr.h>
-+
-+#include <asm/system.h>
-+#include <asm/coldfire.h>
-+
-+extern void fsl_usb_enable_clk(void);
-+extern void fsl_usb_disable_clk(void);
-+extern int fsl_usb_mem_init(struct platform_device *pdev);
-+
-+extern struct fsl_xcvr_ops *xc_ops[];
-+
-+static int otg_used;
-+
-+int usbotg_init(struct platform_device *pdev)
-+{
-+	struct fsl_usb2_platform_data *pdata;
-+	struct fsl_xcvr_ops *xops = xc_ops[USB_CTRLR_OTG];
-+	int rc;
-+
-+	pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
-+
-+	pr_debug("%s: pdev=0x%p  pdata=0x%p\n", __FUNCTION__, pdev, pdata);
-+
-+	if (!xops) {
-+		printk(KERN_ERR "OTG transceiver ops missing\n");
-+		return -EINVAL;
-+	}
-+	pdata->xcvr_ops = xops;
-+	pdata->xcvr_type = xops->xcvr_type;
-+
-+	if (!otg_used) {
-+		/* request_mem_region and ioremap registers */
-+		rc = fsl_usb_mem_init(pdev);
-+		if (rc)
-+			return rc;
-+
-+		fsl_usb_enable_clk();
-+
-+		if (xops->init)
-+			xops->init(pdev);
-+	}
-+
-+	otg_used++;
-+	pr_debug("%s: success\n", __FUNCTION__);
-+	return 0;
-+}
-+
-+void usbotg_uninit(struct platform_device *pdev)
-+{
-+	struct fsl_usb2_platform_data *pdata;
-+	pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
-+
-+	pr_debug("%s\n", __FUNCTION__);
-+
-+	otg_used--;
-+	if (!otg_used) {
-+		if (pdata->xcvr_ops && pdata->xcvr_ops->uninit)
-+			pdata->xcvr_ops->uninit(pdev);
-+
-+		iounmap(pdata->regs);
-+		release_mem_region(pdata->r_start, pdata->r_len);
-+
-+		pdata->regs = NULL;
-+		pdata->r_start = pdata->r_len = 0;
-+
-+		fsl_usb_disable_clk();
-+	}
-+}
-+
-+struct fsl_usb2_platform_data mxc_otg_config = {
-+	.name            = "OTG",
-+	.platform_init   = usbotg_init,
-+	.platform_uninit = usbotg_uninit,
-+	.es              = 1,
-+	.big_endian_mmio = 1,
-+	.big_endian_desc = 1,
-+	.le_setup_buf    = 1,
-+	.does_otg        = 1,
-+	.power_budget    = 500,		/* 500 mA max power */
-+	.max_ep_nr       = 4,		/* DDD read from a register ? */
-+	.phy_mode	 = FSL_USB2_PHY_ULPI, /* DDD redundant with xcvr_type */
-+};
---- /dev/null
-+++ b/arch/m68k/coldfire/usb/otg_device.c
-@@ -0,0 +1,89 @@
-+/*
-+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+
-+/*
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/irq.h>
-+#include <linux/err.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/otg.h>
-+#include <linux/delay.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/usb/fsl_xcvr.h>
-+
-+#include <asm/system.h>
-+#include <asm/coldfire.h>
-+
-+#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000)
-+#define INT_USB		(64 + 64 + 47)	/* INTC1:47 16.2.9.1 */
-+#define INT_UOCSR	(64 + 64 + 53)	/* INTC1:53 16.2.9.1 */
-+
-+extern int usbotg_init(struct platform_device *pdev);
-+extern void usbotg_uninit(struct fsl_usb2_platform_data *pdata);
-+extern struct fsl_usb2_platform_data mxc_otg_config;
-+
-+struct platform_device otg_udc_device;
-+
-+/*!
-+ * OTG Gadget device
-+ */
-+
-+static void usb_release(struct device *dev)
-+{
-+	/* normally not freed */
-+}
-+
-+static u64 udc_dmamask = ~(u32) 0;
-+static struct resource otg_udc_resources[] = {
-+	[0] = {
-+		.start = (u32) (&USB_OTGREGS_BASE),
-+		.end   = (u32) (&USB_OTGREGS_BASE + 0x1ff),
-+		.flags = IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start = INT_USB,
-+		.flags = IORESOURCE_IRQ,
-+	},
-+};
-+
-+
-+struct platform_device otg_udc_device = {
-+	.name = "fsl-usb2-udc",
-+	.id   = -1,
-+	.dev  = {
-+		.release           = usb_release,
-+		.dma_mask          = &udc_dmamask,
-+		.coherent_dma_mask = 0xffffffff,
-+		.platform_data     = &mxc_otg_config,
-+		},
-+	.resource = otg_udc_resources,
-+	.num_resources = ARRAY_SIZE(otg_udc_resources),
-+};
-+
-+static int __init udc_init(void)
-+{
-+	int rc __attribute((unused));
-+
-+	rc = platform_device_register(&otg_udc_device);
-+	if (rc)
-+		printk(KERN_ERR "usb: can't register OTG Gadget, rc=%d\n", rc);
-+	else
-+		printk(KERN_INFO "usb: OTG Gadget registered\n");
-+	return rc;
-+}
-+
-+subsys_initcall(udc_init);
---- /dev/null
-+++ b/arch/m68k/coldfire/usb/otg_host.c
-@@ -0,0 +1,68 @@
-+/*
-+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+
-+/*
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/irq.h>
-+#include <linux/err.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/usb/fsl_xcvr.h>
-+
-+#include <asm/system.h>
-+#include <asm/mcfsim.h>
-+
-+#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000)
-+#define INT_USB		(64 + 64 + 47)	/* INTC1:47 16.2.9.1 */
-+#define INT_UOCSR	(64 + 64 + 53)	/* INTC1:53 16.2.9.1 */
-+
-+struct platform_device *otg_host_device;
-+
-+extern struct platform_device *host_pdev_register(struct resource *res,
-+						  int n_res,
-+						  struct fsl_usb2_platform_data
-+						  *config);
-+
-+extern int usbotg_init(struct platform_device *pdev);
-+extern void usbotg_uninit(struct fsl_usb2_platform_data *pdata);
-+extern struct fsl_usb2_platform_data mxc_otg_config;
-+
-+/*!
-+ * OTG host config
-+ */
-+static struct resource otg_host_resources[] = {
-+	[0] = {
-+		.start = (u32) (&USB_OTGREGS_BASE),
-+		.end   = (u32) (&USB_OTGREGS_BASE + 0x1ff),
-+		.flags = IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start = INT_USB,
-+		.flags = IORESOURCE_IRQ,
-+	},
-+};
-+
-+static int __init otg_host_init(void)
-+{
-+	otg_host_device = host_pdev_register(otg_host_resources,
-+					     ARRAY_SIZE(otg_host_resources),
-+					     &mxc_otg_config);
-+	return 0;
-+}
-+
-+subsys_initcall(otg_host_init);
---- /dev/null
-+++ b/arch/m68k/coldfire/usb/otg_otg.c
-@@ -0,0 +1,96 @@
-+/*
-+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+
-+/*
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/*
-+ * platform_device registration for ULPI OTG device
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/err.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+
-+#include <asm/mcfsim.h>
-+
-+#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000)
-+#define INT_USB		(64 + 64 + 47)	/* INTC1:47 16.2.9.1 */
-+#define INT_UOCSR	(64 + 64 + 53)	/* INTC1:53 16.2.9.1 */
-+
-+extern int usbotg_init(struct platform_device *pdev);
-+extern void usbotg_uninit(struct fsl_usb2_platform_data *pdata);
-+extern struct fsl_usb2_platform_data mxc_otg_config;
-+
-+static void otg_otg_release(struct device *dev)
-+{
-+	/* normally not freed */
-+}
-+
-+/* *INDENT-OFF* */
-+static struct resource otg_otg_resources[] = {
-+	[0] = {
-+		.start = (u32) (&USB_OTGREGS_BASE),
-+		.end   = (u32) (&USB_OTGREGS_BASE + 0x1ff),
-+		.flags = IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start = INT_USB,
-+		.flags = IORESOURCE_IRQ,
-+	},
-+};
-+
-+/*!
-+ * OTG device
-+ */
-+static u64 otg_otg_dmamask = ~(u32) 0;
-+static struct platform_device otg_otg_device = {
-+	.name = "fsl-usb2-otg",
-+	.id   = -1,
-+	.dev  = {
-+		.release           = otg_otg_release,
-+		.dma_mask          = &otg_otg_dmamask,
-+		.coherent_dma_mask = 0xffffffff,
-+		.platform_data     = &mxc_otg_config,
-+	},
-+	.resource = otg_otg_resources,
-+	.num_resources = ARRAY_SIZE(otg_otg_resources),
-+};
-+/* *INDENT-ON* */
-+
-+static int __init mx31_otg_otg_init(void)
-+{
-+	int rc = 0;
-+
-+	pr_debug("register OTG otg res=0x%p, size=%d\n",
-+		 otg_otg_device.resource, otg_otg_device.num_resources);
-+
-+	rc = platform_device_register(&otg_otg_device);
-+	if (rc) {
-+		pr_debug("can't register ULPI OTG dvc, %d\n", rc);
-+	} else {
-+		printk(KERN_INFO "usb: OTG ULPI transceiver registered\n");
-+		pr_debug("otg_otg_device=0x%p  resources=0x%p.\n",
-+			 &otg_otg_device, otg_otg_device.resource);
-+	}
-+
-+	return rc;
-+}
-+
-+subsys_initcall(mx31_otg_otg_init);
-+
-+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-+MODULE_DESCRIPTION("ULPI OTG device registration");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/arch/m68k/coldfire/usb/xcvr.c
-@@ -0,0 +1,156 @@
-+/*
-+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+
-+/*
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/err.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/usb/fsl_xcvr.h>
-+#include <linux/usb/fsl_usb2.h>
-+
-+#include <asm/mcfsim.h>
-+
-+extern void fsl_usb_xcvr_register(struct fsl_xcvr_ops *xcvr_ops);
-+extern void fsl_usb_xcvr_unregister(enum fsl_usb_ctrlr ctrlr);
-+
-+#define MCF_SCM_BCR		MCF_REG32(0xFC040024)
-+#define MCF_SCM_BCR_GBR		(1 << 9)	/* global bursts for read */
-+#define MCF_SCM_BCR_GBW		(1 << 8)	/* global bursts for write */
-+#define MCF_SCM_BCR_SBE_ALL	(0xff << 0)	/* slave burst enable */
-+
-+
-+#ifdef ULPI_DEBUG
-+void print_ulpi_regs(void)
-+{
-+	pr_debug("MCF_SCM_BCR=0x%08lx  MCF_CCM_MISCCR=0x%08x  "
-+		 "MCF_GPIO_PAR_DMA=0x%08x  MCF_GPIO_PAR_USB=08%08x  "
-+		 "MCF_GPIO_PAR_FEC=08%08x\n",
-+		 MCF_SCM_BCR, MCF_CCM_MISCCR, MCF_GPIO_PAR_DMA,
-+		 MCF_GPIO_PAR_USB, MCF_GPIO_PAR_FEC);
-+}
-+EXPORT_SYMBOL(print_ulpi_regs);
-+#endif
-+
-+
-+static void xcvr_init(struct platform_device *pdev)
-+{
-+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+	struct fsl_xcvr_ops *this = pdata->xcvr_ops;
-+	struct fsl_usb_host_regs *regs = pdata->regs;
-+
-+	pr_debug("%s: ctrlr=%d  pdata=0x%p  regs=0x%p\n", __FUNCTION__,
-+		 this->ctrlr, pdata, pdata->regs);
-+
-+	/* enable USB read, write and slave bursts */
-+	MCF_SCM_BCR = MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW | MCF_SCM_BCR_SBE_ALL;
-+
-+	/* Use external clock source if PLL isn't a multiple of 60MHz */
-+	MCF_CCM_MISCCR &= ~MCF_CCM_MISCCR_USBSRC;
-+
-+	/* Initialize the USB Clock: use USB input clock */
-+	MCF_GPIO_PAR_DMA = (MCF_GPIO_PAR_DMA & MCF_GPIO_PAR_DMA_DREQ1_MASK) |
-+			   MCF_GPIO_PAR_DMA_DREQ1_USB_CLKIN;
-+
-+	switch (this->xcvr_type) {
-+	case PORTSCX_PTS_ULPI:
-+		/* Enable the required ULPI signals */
-+		MCF_GPIO_PAR_DMA = (MCF_GPIO_PAR_DMA &
-+				    MCF_GPIO_PAR_DMA_DACK1_MASK) |
-+				    MCF_GPIO_PAR_DMA_DACK1_ULPI_DIR;
-+
-+		MCF_GPIO_PAR_USB = MCF_GPIO_PAR_USB_VBUSEN_ULPI_NXT |
-+				   MCF_GPIO_PAR_USB_VBUSOC_ULPI_STP;
-+
-+		MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC &
-+				    MCF_GPIO_PAR_FEC_FEC0_MASK) |
-+				    MCF_GPIO_PAR_FEC_FEC0_RMII_ULPI;
-+		break;
-+	case PORTSCX_PTS_ONCHIP:
-+		/* Enable VBUS_EN and VBUS_OC signals */
-+		MCF_GPIO_PAR_USB = MCF_GPIO_PAR_USB_VBUSEN_VBUSEN |
-+				   MCF_GPIO_PAR_USB_VBUSOC_VBUSOC;
-+
-+		/* Setup USB_VBUS_OC signal to be active-low */
-+		MCF_CCM_MISCCR |= MCF_CCM_MISCCR_USBOC;
-+
-+		break;
-+	}
-+
-+	pr_debug("&regs->portsc1=0x%p  old portsc1=0x%x \n", &regs->portsc1,
-+		 regs->portsc1);
-+
-+	regs->portsc1 &= ~PORTSCX_PTS_MASK;
-+	regs->portsc1 |= this->xcvr_type;
-+
-+	/*
-+	 * need to reset the controller here so that the ID pin
-+	 * is correctly detected.
-+	 */
-+	regs->usbcmd |= USB_CMD_CTRL_RESET;
-+
-+	/*
-+	 * allow controller to reset, and leave time for
-+	 * the ULPI transceiver to reset too.
-+	 */
-+	mdelay(10);
-+
-+	pr_debug("DDD %s: done.  portsc1=0x%x\n", __FUNCTION__, regs->portsc1);
-+}
-+
-+static void xcvr_uninit(struct platform_device *pdev)
-+{
-+	pr_debug("%s: pdev=0x%p\n", __FUNCTION__, pdev);
-+}
-+
-+
-+struct fsl_xcvr_ops xcvr_ops_otg = {
-+	.ctrlr          = USB_CTRLR_OTG,
-+	.init           = xcvr_init,
-+	.uninit         = xcvr_uninit,
-+
-+#ifdef CONFIG_USB_M5445X_ULPI
-+	.xcvr_type      = PORTSCX_PTS_ULPI,
-+#elif defined CONFIG_USB_M5445X_FSLS
-+	.xcvr_type      = PORTSCX_PTS_ONCHIP,
-+#else
-+#error "Invalid USB transceiver selection."
-+#endif
-+};
-+
-+static int __init usb_xcvr_init(void)
-+{
-+	pr_debug("%s\n", __FUNCTION__);
-+
-+	fsl_usb_xcvr_register(&xcvr_ops_otg);
-+
-+	pr_debug("%s done\n", __FUNCTION__);
-+	return 0;
-+}
-+
-+static void __exit usb_xcvr_exit(void)
-+{
-+	fsl_usb_xcvr_unregister(USB_CTRLR_OTG);
-+}
-+
-+module_init(usb_xcvr_init);
-+module_exit(usb_xcvr_exit);
-+
-+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-+MODULE_DESCRIPTION("External ULPI xcvr driver");
-+MODULE_LICENSE("GPL");
-+
---- /dev/null
-+++ b/arch/m68k/coldfire/usb.c
-@@ -0,0 +1,182 @@
-+/*
-+ *
-+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ *	otg_{get,set}_transceiver() are from arm/plat-omap/usb.c.
-+ *	which is Copyright (C) 2004 Texas Instruments, Inc.
-+ */
-+
-+/*
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/err.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/otg.h>
-+#include <linux/delay.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/usb/fsl_xcvr.h>
-+
-+
-+/* The dmamask must be set for EHCI to work */
-+static u64 ehci_dmamask = ~(u32) 0;
-+
-+struct fsl_xcvr_ops *xc_ops[3] = { NULL };
-+
-+void fsl_usb_enable_clk(void)
-+{
-+}
-+EXPORT_SYMBOL(fsl_usb_enable_clk);
-+
-+void fsl_usb_disable_clk(void)
-+{
-+}
-+EXPORT_SYMBOL(fsl_usb_disable_clk);
-+
-+void fsl_usb_xcvr_register(struct fsl_xcvr_ops *xcvr_ops)
-+{
-+	pr_debug("%s ctrlr=%d\n", __FUNCTION__, xcvr_ops->ctrlr);
-+	xc_ops[xcvr_ops->ctrlr] = xcvr_ops;
-+
-+}
-+EXPORT_SYMBOL(fsl_usb_xcvr_register);
-+
-+void fsl_usb_xcvr_unregister(enum fsl_usb_ctrlr ctrlr)
-+{
-+	pr_debug("%s ctrlr=%d\n", __FUNCTION__, ctrlr);
-+	xc_ops[ctrlr] = NULL;
-+}
-+EXPORT_SYMBOL(fsl_usb_xcvr_unregister);
-+
-+/*!
-+ * Register an instance of a USB host platform device.
-+ *
-+ * @param	res:	resource pointer
-+ * @param       n_res:	number of resources
-+ * @param       config: config pointer
-+ *
-+ * @return      newly-registered platform_device
-+ *
-+ * DDD fix this comment:
-+ * The USB controller supports 3 host interfaces, and the
-+ * kernel can be configured to support some number of them.
-+ * Each supported host interface is registered as an instance
-+ * of the "fsl-ehci" device.  Call this function multiple times
-+ * to register each host interface.
-+ */
-+static int instance_id;
-+struct platform_device *host_pdev_register(struct resource *res, int n_res,
-+					  struct fsl_usb2_platform_data *config)
-+{
-+	struct platform_device *pdev;
-+
-+	pr_debug("register host res=0x%p, size=%d\n", res, n_res);
-+
-+	pdev = platform_device_register_simple("fsl-ehci",
-+					       instance_id, res, n_res);
-+	if (IS_ERR(pdev)) {
-+		printk(KERN_ERR "usb: can't register %s Host, %ld\n",
-+		       config->name, PTR_ERR(pdev));
-+		return NULL;
-+	}
-+
-+	pdev->dev.coherent_dma_mask = 0xffffffff;
-+	pdev->dev.dma_mask = &ehci_dmamask;
-+
-+	/*
-+	 * platform_device_add_data() makes a copy of
-+	 * the platform_data passed in.  That makes it
-+	 * impossible to share the same config struct for
-+	 * all OTG devices (host,gadget,otg).  So, just
-+	 * set the platform_data pointer ourselves.
-+	 */
-+	pdev->dev.platform_data = config;
-+
-+	printk(KERN_INFO "usb: %s Host registered\n", config->name);
-+	pr_debug("pdev=0x%p  dev=0x%p  resources=0x%p  pdata=0x%p\n",
-+		 pdev, &pdev->dev, pdev->resource, pdev->dev.platform_data);
-+
-+	instance_id++;
-+
-+	return pdev;
-+}
-+
-+
-+int fsl_usb_mem_init(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+	struct fsl_usb2_platform_data *pdata;
-+
-+	pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
-+
-+	pr_debug("%s: pdev=0x%p  pdata=0x%p\n", __FUNCTION__, pdev, pdata);
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res) {
-+		dev_err(&pdev->dev, "no MEM resource.\n");
-+		return -ENODEV;
-+	}
-+
-+	pdata->r_start = res->start;
-+	pdata->r_len = res->end - res->start + 1;
-+	pr_debug("%s: MEM resource start=0x%x  len=0x%x\n", pdata->name,
-+		 res->start, pdata->r_len);
-+
-+	if (!request_mem_region(pdata->r_start, pdata->r_len, "OTG")) {
-+		dev_err(&pdev->dev, "request_mem_region failed\n");
-+		return -EBUSY;
-+	}
-+	pdata->regs = ioremap(pdata->r_start, pdata->r_len);
-+	pr_debug("ioremapped to 0x%p\n", pdata->regs);
-+
-+	if (pdata->regs == NULL) {
-+		dev_err(&pdev->dev, "ioremap failed\n");
-+		release_mem_region(pdata->r_start, pdata->r_len);
-+		return -EFAULT;
-+	}
-+
-+	pr_debug("%s: success\n", __FUNCTION__);
-+	return 0;
-+}
-+
-+
-+#if defined(CONFIG_USB_OTG)
-+static struct otg_transceiver *xceiv;
-+
-+/**
-+ * otg_get_transceiver - find the (single) OTG transceiver driver
-+ *
-+ * Returns the transceiver driver, after getting a refcount to it; or
-+ * null if there is no such transceiver.  The caller is responsible for
-+ * releasing that count.
-+ */
-+struct otg_transceiver *otg_get_transceiver(void)
-+{
-+	pr_debug("%s xceiv=0x%p\n", __FUNCTION__, xceiv);
-+	if (xceiv)
-+		get_device(xceiv->dev);
-+	return xceiv;
-+}
-+EXPORT_SYMBOL(otg_get_transceiver);
-+
-+int otg_set_transceiver(struct otg_transceiver *x)
-+{
-+	pr_debug("%s xceiv=0x%p  x=0x%p\n", __FUNCTION__, xceiv, x);
-+	if (xceiv && x)
-+		return -EBUSY;
-+	xceiv = x;
-+	return 0;
-+}
-+EXPORT_SYMBOL(otg_set_transceiver);
-+#endif
---- /dev/null
-+++ b/arch/m68k/coldfire/vmlinux-cf.lds
-@@ -0,0 +1,130 @@
-+/* ld script to make m68k Coldfire Linux kernel
-+ *
-+ * Derived from arch/m68k/kernel/vmlinux-std.lds
-+ *
-+ * Updated 11/26/2007 for new CodeSourcery toolset
-+ *     by Kurt Mahan <kmahan@freescale.com>
-+ */
-+
-+#define	LOAD_OFFSET	0x00000000
-+
-+#include <asm-generic/vmlinux.lds.h>
-+#include <asm/page_offset.h>
-+
-+#define	START_OFFSET	0x00020000
-+#define	IMAGE_START	PAGE_OFFSET_RAW + START_OFFSET
-+
-+OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
-+OUTPUT_ARCH(m68k)
-+ENTRY(_stext)
-+jiffies = jiffies_64 + 4;
-+
-+SECTIONS
-+{
-+  . = IMAGE_START;
-+  .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
-+  	_text = .;			/* Text and read-only data */
-+	*(.text.head)
-+  } :text = 0x4e75
-+
-+  .text : AT(ADDR(.text) - LOAD_OFFSET) {
-+	TEXT_TEXT
-+	SCHED_TEXT
-+	LOCK_TEXT
-+	*(.fixup)
-+	*(.gnu.warning)
-+  } :text = 0x4e75
-+  _etext = .;			/* End of text section */
-+
-+  . = ALIGN(16);
-+  __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-+	__start___ex_table = .;
-+	*(__ex_table)
-+	__stop___ex_table = .;
-+  }
-+
-+  RODATA
-+
-+  . = ALIGN(8192);
-+  .data : AT(ADDR(.data) - LOAD_OFFSET) {	/* Data */
-+	DATA_DATA
-+	CONSTRUCTORS
-+  } :data
-+
-+
-+  . = ALIGN(16);
-+  .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET ) {
-+	*(.data.cacheline_aligned)
-+  } :data
-+
-+  _edata = .;			/* End of data section */
-+
-+  NOTES				/* support ld --build-id */
-+
-+  . = ALIGN(8192);		/* Initrd */
-+  .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-+  	__init_begin = .;
-+	_sinittext = .;
-+	*(.init.text)
-+	_einittext = .;
-+  }
-+
-+  .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
-+	*(.init.data)
-+  }
-+
-+  . = ALIGN(16);
-+  .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
-+	__setup_start = .;
-+	*(.init.setup)
-+  	__setup_end = .;
-+  }
-+
-+  .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
-+	__initcall_start = .;
-+	INITCALLS
-+	__initcall_end = .;
-+  }
-+
-+  .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-+	__con_initcall_start = .;
-+	*(.con_initcall.init)
-+	__con_initcall_end = .;
-+  }
-+
-+  SECURITY_INIT
-+
-+#ifdef CONFIG_BLK_DEV_INITRD
-+  . = ALIGN(8192);
-+  .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
-+	__initramfs_start = .;
-+	*(.init.ramfs)
-+	__initramfs_end = .;
-+  }
-+#endif
-+
-+  . = ALIGN(8192);
-+  __init_end = .;
-+
-+  .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-+	*(.data.init_task)	/* The initial task and kernel stack */
-+  }
-+
-+  _sbss = .;
-+  .bss : AT(ADDR(.bss) - LOAD_OFFSET) {		/* BSS */
-+	*(.bss)
-+  }
-+  _ebss = .;
-+
-+  _end = . ;
-+
-+  /* Sections to be discarded */
-+  /DISCARD/ : {
-+	*(.exit.text)
-+	*(.exit.data)
-+	*(.exitcall.exit)
-+  }
-+
-+  /* Stabs debugging sections.  */
-+  STABS_DEBUG
-+}
---- /dev/null
-+++ b/arch/m68k/configs/55_defconfig
-@@ -0,0 +1,830 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.25
-+# Thu Jun 26 16:17:41 2008
-+#
-+CONFIG_M68K=y
-+CONFIG_MMU=y
-+# CONFIG_GENERIC_TIME is not set
-+# CONFIG_GENERIC_CLOCKEVENTS is not set
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_TIME_LOW_RES=y
-+CONFIG_GENERIC_IOMAP=y
-+# CONFIG_NO_IOPORT is not set
-+# CONFIG_NO_DMA is not set
-+CONFIG_ARCH_SUPPORTS_AOUT=y
-+CONFIG_HZ=100
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+CONFIG_LOCALVERSION_AUTO=y
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_LOG_BUF_SHIFT=17
-+# CONFIG_CGROUPS is not set
-+CONFIG_GROUP_SCHED=y
-+CONFIG_FAIR_GROUP_SCHED=y
-+# CONFIG_RT_GROUP_SCHED is not set
-+CONFIG_USER_SCHED=y
-+# CONFIG_CGROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+CONFIG_NAMESPACES=y
-+# CONFIG_UTS_NS is not set
-+# CONFIG_IPC_NS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
-+# CONFIG_BLK_DEV_INITRD is not set
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-+CONFIG_SYSCTL=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+# CONFIG_PROFILING is not set
-+# CONFIG_MARKERS is not set
-+# CONFIG_HAVE_OPROFILE is not set
-+# CONFIG_HAVE_KPROBES is not set
-+# CONFIG_HAVE_KRETPROBES is not set
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+# CONFIG_KMOD is not set
-+CONFIG_BLOCK=y
-+CONFIG_LBD=y
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-+
-+#
-+# Platform dependent setup
-+#
-+# CONFIG_SUN3 is not set
-+CONFIG_COLDFIRE=y
-+CONFIG_CFV4E=y
-+# CONFIG_AMIGA is not set
-+# CONFIG_ATARI is not set
-+# CONFIG_PCI is not set
-+# CONFIG_MAC is not set
-+# CONFIG_APOLLO is not set
-+# CONFIG_VME is not set
-+# CONFIG_HP300 is not set
-+# CONFIG_SUN3X is not set
-+# CONFIG_Q40 is not set
-+
-+#
-+# Processor type
-+#
-+# CONFIG_M68020 is not set
-+# CONFIG_M68030 is not set
-+# CONFIG_M68040 is not set
-+# CONFIG_M68060 is not set
-+CONFIG_M5445X=y
-+# CONFIG_M54451 is not set
-+CONFIG_M54455=y
-+# CONFIG_M54451EVB is not set
-+CONFIG_M54455EVB=y
-+# CONFIG_M547X_8X is not set
-+CONFIG_MCFCLK=266666666
-+# CONFIG_MCF_USER_HALT is not set
-+CONFIG_MMU_CFV4E=y
-+CONFIG_SDRAM_BASE=0x40000000
-+CONFIG_SDRAM_SIZE=0x10000000
-+CONFIG_NOR_FLASH_BASE=0x00000000
-+# CONFIG_M68KFPU_EMU is not set
-+CONFIG_ADVANCED=y
-+# CONFIG_RMW_INSNS is not set
-+CONFIG_SINGLE_MEMORY_CHUNK=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_NEED_MULTIPLE_NODES=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+
-+#
-+# General setup
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_PROC_HARDWARE=y
-+CONFIG_ZONE_DMA=y
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_MULTIPLE_TABLES is not set
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+CONFIG_INET_AH=y
-+CONFIG_INET_ESP=y
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_STANDALONE is not set
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+# CONFIG_MTD is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=64000
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_COLDFIRE_SEC is not set
-+# CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+CONFIG_HAVE_IDE=y
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_SCSI_DEBUG is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+# CONFIG_PHYLIB is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+CONFIG_FEC=y
-+# CONFIG_FEC2 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+CONFIG_SERIO_SERPORT=y
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_COLDFIRE=y
-+# CONFIG_SERIAL_MCF is not set
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_GEN_RTC is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+
-+#
-+# I2C Algorithms
-+#
-+# CONFIG_I2C_ALGOBIT is not set
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+# CONFIG_I2C_MCF548x is not set
-+CONFIG_I2C_MCF=y
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+
-+#
-+# SPI support
-+#
-+# CONFIG_SPI is not set
-+# CONFIG_COLDFIRE_EDMA is not set
-+# CONFIG_SPI_MASTER is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_WATCHDOG is not set
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+CONFIG_DAB=y
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+CONFIG_VIDEO_OUTPUT_CONTROL=m
-+# CONFIG_FB is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+# CONFIG_HID_SUPPORT is not set
-+# CONFIG_USB_SUPPORT is not set
-+# CONFIG_MMC is not set
-+# CONFIG_MEMSTICK is not set
-+# CONFIG_NEW_LEDS is not set
-+# CONFIG_RTC_CLASS is not set
-+
-+#
-+# Userspace I/O
-+#
-+# CONFIG_UIO is not set
-+
-+#
-+# Character devices
-+#
-+# CONFIG_SERIAL_CONSOLE is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_INOTIFY is not set
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+CONFIG_NTFS_FS=y
-+# CONFIG_NTFS_DEBUG is not set
-+CONFIG_NTFS_RW=y
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+# CONFIG_PROC_KCORE is not set
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=y
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+# CONFIG_NFS_V3 is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_BIND34 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+CONFIG_DEBUG_SLAB=y
-+# CONFIG_DEBUG_SLAB_LEAK is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_DEBUG_INFO=y
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+# CONFIG_FRAME_POINTER is not set
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
-+CONFIG_BOOTPARAM=y
-+CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe ip=172.27.155.55:172.27.155.1:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)"
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_AEAD=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+# CONFIG_CRYPTO_SEQIV is not set
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_HMAC=y
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+CONFIG_CRYPTO_ECB=y
-+CONFIG_CRYPTO_CBC=y
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_XTS is not set
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+CONFIG_CRYPTO_TEST=m
-+CONFIG_CRYPTO_AUTHENC=y
-+# CONFIG_CRYPTO_LZO is not set
-+CONFIG_CRYPTO_HW=y
-+# CONFIG_CRYPTO_DEV_MCFCAU is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_CRC_CCITT=y
-+CONFIG_CRC16=y
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+CONFIG_LIBCRC32C=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
---- /dev/null
-+++ b/arch/m68k/configs/m54455evb_defconfig
-@@ -0,0 +1,1037 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.23
-+# Thu Dec  6 12:14:18 2007
-+#
-+CONFIG_M68K=y
-+CONFIG_MMU=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_TIME_LOW_RES=y
-+CONFIG_GENERIC_IOMAP=y
-+CONFIG_NO_IOPORT=y
-+# CONFIG_NO_DMA is not set
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+CONFIG_LOCALVERSION_AUTO=y
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_AUDIT is not set
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_LOG_BUF_SHIFT=17
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+# CONFIG_BLK_DEV_INITRD is not set
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-+CONFIG_SYSCTL=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+# CONFIG_KMOD is not set
-+CONFIG_BLOCK=y
-+CONFIG_LBD=y
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+
-+#
-+# Platform dependent setup
-+#
-+# CONFIG_SUN3 is not set
-+CONFIG_COLDFIRE=y
-+CONFIG_CFV4E=y
-+# CONFIG_AMIGA is not set
-+# CONFIG_ATARI is not set
-+# CONFIG_MAC is not set
-+# CONFIG_APOLLO is not set
-+# CONFIG_VME is not set
-+# CONFIG_HP300 is not set
-+# CONFIG_SUN3X is not set
-+# CONFIG_Q40 is not set
-+
-+#
-+# Processor type
-+#
-+# CONFIG_M68020 is not set
-+# CONFIG_M68030 is not set
-+# CONFIG_M68040 is not set
-+# CONFIG_M68060 is not set
-+CONFIG_M54455=y
-+CONFIG_MCFCLK=266666666
-+# CONFIG_MCF_USER_HALT is not set
-+CONFIG_MMU_CFV4E=y
-+CONFIG_SDRAM_BASE=0x40000000
-+CONFIG_SDRAM_SIZE=0x0FFFFFFF
-+CONFIG_NOR_FLASH_BASE=0x00000000
-+# CONFIG_M68KFPU_EMU is not set
-+CONFIG_ADVANCED=y
-+# CONFIG_RMW_INSNS is not set
-+CONFIG_SINGLE_MEMORY_CHUNK=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_NEED_MULTIPLE_NODES=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+
-+#
-+# General setup
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_PROC_HARDWARE=y
-+CONFIG_ZONE_DMA=y
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_MULTIPLE_TABLES is not set
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+CONFIG_INET_AH=y
-+CONFIG_INET_ESP=y
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+# CONFIG_STANDALONE is not set
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+CONFIG_MTD_DEBUG=y
-+CONFIG_MTD_DEBUG_VERBOSE=0
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+CONFIG_MTD_CFI_ADV_OPTIONS=y
-+CONFIG_MTD_CFI_NOSWAP=y
-+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-+CONFIG_MTD_CFI_GEOMETRY=y
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+# CONFIG_MTD_CFI_I2 is not set
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_OTP is not set
-+CONFIG_MTD_CFI_INTELEXT=y
-+# CONFIG_MTD_CFI_AMDSTD is not set
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x00000000
-+CONFIG_MTD_PHYSMAP_LEN=0x1000000
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_DATAFLASH is not set
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+# CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=64000
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+CONFIG_SCSI_LOWLEVEL=y
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_SCSI_DEBUG is not set
-+CONFIG_ATA=m
-+# CONFIG_ATA_NONSTANDARD is not set
-+CONFIG_PATA_FSL=m
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_PHYLIB is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+CONFIG_FEC=y
-+# CONFIG_FEC2 is not set
-+CONFIG_NETDEV_1000=y
-+CONFIG_NETDEV_10000=y
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+CONFIG_USB_PEGASUS=m
-+CONFIG_USB_RTL8150=m
-+CONFIG_USB_USBNET_MII=m
-+CONFIG_USB_USBNET=m
-+CONFIG_USB_NET_AX8817X=m
-+CONFIG_USB_NET_CDCETHER=m
-+# CONFIG_USB_NET_DM9601 is not set
-+# CONFIG_USB_NET_GL620A is not set
-+# CONFIG_USB_NET_NET1080 is not set
-+# CONFIG_USB_NET_PLUSB is not set
-+# CONFIG_USB_NET_MCS7830 is not set
-+# CONFIG_USB_NET_RNDIS_HOST is not set
-+# CONFIG_USB_NET_CDC_SUBSET is not set
-+# CONFIG_USB_NET_ZAURUS is not set
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+CONFIG_SERIO_SERPORT=y
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_COLDFIRE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_WATCHDOG is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_GEN_RTC is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+# CONFIG_I2C is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_COLDFIRE_EDMA=y
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+# CONFIG_SPI_BITBANG is not set
-+CONFIG_SPI_COLDFIRE=y
-+CONFIG_SPI_COLDFIRE_DSPI_EDMA=y
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+CONFIG_SPI_COLDFIRE_SSI_AUDIO=y
-+# CONFIG_SSIAUDIO_USE_EDMA is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+CONFIG_DAB=y
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+# CONFIG_VGASTATE is not set
-+CONFIG_VIDEO_OUTPUT_CONTROL=m
-+# CONFIG_FB is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+CONFIG_HID_DEBUG=y
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-+# CONFIG_HID_FF is not set
-+# CONFIG_USB_HIDDEV is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+# CONFIG_USB_ARCH_HAS_OHCI is not set
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DEVICE_CLASS is not set
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_OTG is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+CONFIG_USB_EHCI_HCD=m
-+CONFIG_USB_EHCI_SPLIT_ISO=y
-+CONFIG_USB_EHCI_ROOT_HUB_TT=y
-+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+CONFIG_USB_M5445X_ULPI=y
-+# CONFIG_USB_M5445X_FSLS is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+# CONFIG_USB_MON is not set
-+
-+#
-+# USB port drivers
-+#
-+
-+#
-+# USB Serial Converter support
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_SISUSBVGA is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+
-+#
-+# USB DSL modem support
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+CONFIG_USB_GADGET=m
-+# CONFIG_USB_GADGET_DEBUG is not set
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+CONFIG_USB_GADGET_MCF5445X=y
-+CONFIG_USB_MCF5445X=m
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+# CONFIG_USB_ZERO is not set
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+# CONFIG_USB_G_SERIAL is not set
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_MMC is not set
-+# CONFIG_NEW_LEDS is not set
-+# CONFIG_RTC_CLASS is not set
-+
-+#
-+# DMA Engine support
-+#
-+# CONFIG_DMA_ENGINE is not set
-+
-+#
-+# DMA Clients
-+#
-+
-+#
-+# DMA Devices
-+#
-+
-+#
-+# Userspace I/O
-+#
-+# CONFIG_UIO is not set
-+
-+#
-+# Character devices
-+#
-+# CONFIG_SERIAL_CONSOLE is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+CONFIG_MINIX_FS=y
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_INOTIFY is not set
-+# CONFIG_QUOTA is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+CONFIG_NTFS_FS=y
-+# CONFIG_NTFS_DEBUG is not set
-+CONFIG_NTFS_RW=y
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+# CONFIG_PROC_KCORE is not set
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_RAMFS=y
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+CONFIG_NFS_FS=y
-+# CONFIG_NFS_V3 is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_BIND34 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+CONFIG_DEBUG_SLAB=y
-+# CONFIG_DEBUG_SLAB_LEAK is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_DEBUG_INFO=y
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_FRAME_POINTER is not set
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+CONFIG_BOOTPARAM=y
-+CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe ip=172.27.155.55:172.27.155.1:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)"
-+
-+#
-+# CodeTEST Setup
-+#
-+# CONFIG_CODETEST is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_HMAC=y
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+CONFIG_CRYPTO_ECB=y
-+CONFIG_CRYPTO_CBC=y
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+CONFIG_CRYPTO_TEST=m
-+CONFIG_CRYPTO_HW=y
-+CONFIG_CRYPTO_DEV_MCFCAU=y
-+CONFIG_CRYPTO_DEV_MCFCAU_DES=y
-+CONFIG_CRYPTO_DEV_MCFCAU_AES=y
-+CONFIG_CRYPTO_DEV_MCFCAU_MD5=y
-+CONFIG_CRYPTO_DEV_MCFCAU_SHA1=y
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_CRC_CCITT=y
-+CONFIG_CRC16=y
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+CONFIG_LIBCRC32C=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_DMA=y
---- /dev/null
-+++ b/arch/m68k/configs/m5475evb_defconfig
-@@ -0,0 +1,954 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.25
-+# Wed Jul  9 16:09:19 2008
-+#
-+CONFIG_M68K=y
-+CONFIG_MMU=y
-+# CONFIG_GENERIC_TIME is not set
-+# CONFIG_GENERIC_CLOCKEVENTS is not set
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_TIME_LOW_RES=y
-+CONFIG_GENERIC_IOMAP=y
-+# CONFIG_NO_IOPORT is not set
-+# CONFIG_NO_DMA is not set
-+CONFIG_ARCH_SUPPORTS_AOUT=y
-+CONFIG_HZ=100
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+CONFIG_LOCALVERSION_AUTO=y
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_LOG_BUF_SHIFT=17
-+# CONFIG_CGROUPS is not set
-+CONFIG_GROUP_SCHED=y
-+CONFIG_FAIR_GROUP_SCHED=y
-+# CONFIG_RT_GROUP_SCHED is not set
-+CONFIG_USER_SCHED=y
-+# CONFIG_CGROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+CONFIG_NAMESPACES=y
-+# CONFIG_UTS_NS is not set
-+# CONFIG_IPC_NS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
-+# CONFIG_BLK_DEV_INITRD is not set
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-+CONFIG_SYSCTL=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+# CONFIG_PROFILING is not set
-+# CONFIG_MARKERS is not set
-+# CONFIG_HAVE_OPROFILE is not set
-+# CONFIG_HAVE_KPROBES is not set
-+# CONFIG_HAVE_KRETPROBES is not set
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+# CONFIG_KMOD is not set
-+CONFIG_BLOCK=y
-+CONFIG_LBD=y
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-+
-+#
-+# Platform dependent setup
-+#
-+# CONFIG_SUN3 is not set
-+CONFIG_COLDFIRE=y
-+CONFIG_CFV4E=y
-+CONFIG_MCD_DMA=y
-+# CONFIG_AMIGA is not set
-+# CONFIG_ATARI is not set
-+CONFIG_PCI=y
-+# CONFIG_MAC is not set
-+# CONFIG_APOLLO is not set
-+# CONFIG_VME is not set
-+# CONFIG_HP300 is not set
-+# CONFIG_SUN3X is not set
-+# CONFIG_Q40 is not set
-+
-+#
-+# Processor type
-+#
-+# CONFIG_M68020 is not set
-+# CONFIG_M68030 is not set
-+# CONFIG_M68040 is not set
-+# CONFIG_M68060 is not set
-+# CONFIG_M5445X is not set
-+CONFIG_M547X_8X=y
-+CONFIG_M547X=y
-+# CONFIG_M548X is not set
-+# CONFIG_M5475AFE is not set
-+# CONFIG_M5475BFE is not set
-+CONFIG_M5475CFE=y
-+# CONFIG_M5475DFE is not set
-+# CONFIG_M5475EFE is not set
-+# CONFIG_M5475FFE is not set
-+# CONFIG_M5485AFE is not set
-+# CONFIG_M5485BFE is not set
-+# CONFIG_M5485CFE is not set
-+# CONFIG_M5485DFE is not set
-+# CONFIG_M5485EFE is not set
-+# CONFIG_M5485FFE is not set
-+CONFIG_MCFCLK=266000000
-+# CONFIG_MCF_USER_HALT is not set
-+CONFIG_MMU_CFV4E=y
-+CONFIG_SDRAM_BASE=0x00000000
-+CONFIG_SDRAM_SIZE=0x04000000
-+CONFIG_NOR_FLASH_BASE=0xE0000000
-+# CONFIG_M68KFPU_EMU is not set
-+CONFIG_ADVANCED=y
-+# CONFIG_RMW_INSNS is not set
-+CONFIG_SINGLE_MEMORY_CHUNK=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_NEED_MULTIPLE_NODES=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+
-+#
-+# General setup
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_PROC_HARDWARE=y
-+CONFIG_ZONE_DMA=y
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+CONFIG_PCI_LEGACY=y
-+# CONFIG_PCI_DEBUG is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_MULTIPLE_TABLES is not set
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+CONFIG_INET_AH=y
-+CONFIG_INET_ESP=y
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+CONFIG_CAN=y
-+CONFIG_CAN_RAW=y
-+# CONFIG_CAN_BCM is not set
-+
-+#
-+# CAN Device Drivers
-+#
-+# CONFIG_CAN_VCAN is not set
-+CONFIG_CAN_FLEXCAN=y
-+CONFIG_CAN_MCF547X_8X=y
-+# CONFIG_CAN_DEBUG_DEVICES is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_STANDALONE is not set
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+
-+#
-+# User Modules And Translation Layers
-+#
-+# CONFIG_MTD_CHAR is not set
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+# CONFIG_MTD_CFI is not set
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+CONFIG_MTD_RAM=y
-+CONFIG_MTD_ROM=y
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+# CONFIG_MTD_PHYSMAP is not set
-+# CONFIG_MTD_INTEL_VR_NOR is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_PMC551 is not set
-+# CONFIG_MTD_DATAFLASH is not set
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+# CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_CPQ_DA is not set
-+# CONFIG_BLK_CPQ_CISS_DA is not set
-+# CONFIG_BLK_DEV_DAC960 is not set
-+# CONFIG_BLK_DEV_UMEM is not set
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_SX8 is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=64000
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+CONFIG_COLDFIRE_SEC=y
-+CONFIG_SEC_DEVICE=y
-+# CONFIG_PHANTOM is not set
-+# CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_SGI_IOC4 is not set
-+# CONFIG_TIFM_CORE is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+CONFIG_HAVE_IDE=y
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+# CONFIG_FUSION is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+# CONFIG_FIREWIRE is not set
-+# CONFIG_IEEE1394 is not set
-+# CONFIG_I2O is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+# CONFIG_ARCNET is not set
-+# CONFIG_PHYLIB is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+CONFIG_FEC_548x=y
-+CONFIG_FEC_548x_AUTO_NEGOTIATION=y
-+# CONFIG_FEC_548x_ENABLE_FEC2 is not set
-+# CONFIG_HAPPYMEAL is not set
-+# CONFIG_SUNGEM is not set
-+# CONFIG_CASSINI is not set
-+# CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_NET_TULIP is not set
-+# CONFIG_HP100 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_NET_PCI is not set
-+# CONFIG_B44 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+# CONFIG_TR is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_WAN is not set
-+# CONFIG_FDDI is not set
-+# CONFIG_HIPPI is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NET_FC is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+CONFIG_SERIO_SERPORT=y
-+# CONFIG_SERIO_PCIPS2 is not set
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+# CONFIG_NOZOMI is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_COLDFIRE=y
-+CONFIG_SERIAL_COLDFIRE_IRDA=y
-+# CONFIG_SERIAL_MCF is not set
-+# CONFIG_SERIAL_JSM is not set
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_GEN_RTC is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_APPLICOM is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+# CONFIG_I2C is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+CONFIG_SPI_DEBUG=y
-+# CONFIG_COLDFIRE_EDMA is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+# CONFIG_SPI_BITBANG is not set
-+CONFIG_SPI_COLDFIRE=y
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+# CONFIG_SPI_COLDFIRE_SSI_AUDIO is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_COLDFIRE_WATCHDOG=m
-+
-+#
-+# PCI-based Watchdog Cards
-+#
-+# CONFIG_PCIPCWATCHDOG is not set
-+# CONFIG_WDTPCI is not set
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+CONFIG_DAB=y
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_DRM is not set
-+# CONFIG_VGASTATE is not set
-+CONFIG_VIDEO_OUTPUT_CONTROL=m
-+# CONFIG_FB is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+CONFIG_HID_DEBUG=y
-+# CONFIG_HIDRAW is not set
-+# CONFIG_USB_SUPPORT is not set
-+# CONFIG_MMC is not set
-+# CONFIG_MEMSTICK is not set
-+# CONFIG_NEW_LEDS is not set
-+# CONFIG_INFINIBAND is not set
-+# CONFIG_RTC_CLASS is not set
-+
-+#
-+# Userspace I/O
-+#
-+# CONFIG_UIO is not set
-+
-+#
-+# Character devices
-+#
-+# CONFIG_SERIAL_CONSOLE is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_INOTIFY is not set
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+CONFIG_NTFS_FS=y
-+# CONFIG_NTFS_DEBUG is not set
-+CONFIG_NTFS_RW=y
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+# CONFIG_PROC_KCORE is not set
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+# CONFIG_JFFS2_FS is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=y
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+CONFIG_ROMFS_FS=y
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+# CONFIG_NFS_V3 is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_BIND34 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+CONFIG_DEBUG_SLAB=y
-+# CONFIG_DEBUG_SLAB_LEAK is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_DEBUG_INFO=y
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+# CONFIG_FRAME_POINTER is not set
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
-+CONFIG_BOOTPARAM=y
-+CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.163.2:/tftpboot/ltib ip=172.27.163.3:172.27.163.2:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)"
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_AEAD=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+# CONFIG_CRYPTO_SEQIV is not set
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_HMAC=y
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_ECB is not set
-+CONFIG_CRYPTO_CBC=y
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_XTS is not set
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+CONFIG_CRYPTO_TEST=m
-+CONFIG_CRYPTO_AUTHENC=y
-+# CONFIG_CRYPTO_LZO is not set
-+# CONFIG_CRYPTO_HW is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_CRC_CCITT=y
-+CONFIG_CRC16=y
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+CONFIG_LIBCRC32C=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
---- /dev/null
-+++ b/arch/m68k/configs/m5485evb_defconfig
-@@ -0,0 +1,859 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.25
-+# Thu Jul 10 16:12:53 2008
-+#
-+CONFIG_M68K=y
-+CONFIG_MMU=y
-+# CONFIG_GENERIC_TIME is not set
-+# CONFIG_GENERIC_CLOCKEVENTS is not set
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_TIME_LOW_RES=y
-+CONFIG_GENERIC_IOMAP=y
-+# CONFIG_NO_IOPORT is not set
-+# CONFIG_NO_DMA is not set
-+CONFIG_ARCH_SUPPORTS_AOUT=y
-+CONFIG_HZ=100
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+CONFIG_LOCALVERSION_AUTO=y
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_LOG_BUF_SHIFT=17
-+# CONFIG_CGROUPS is not set
-+CONFIG_GROUP_SCHED=y
-+CONFIG_FAIR_GROUP_SCHED=y
-+# CONFIG_RT_GROUP_SCHED is not set
-+CONFIG_USER_SCHED=y
-+# CONFIG_CGROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+CONFIG_NAMESPACES=y
-+# CONFIG_UTS_NS is not set
-+# CONFIG_IPC_NS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
-+# CONFIG_BLK_DEV_INITRD is not set
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-+CONFIG_SYSCTL=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+# CONFIG_PROFILING is not set
-+# CONFIG_MARKERS is not set
-+# CONFIG_HAVE_OPROFILE is not set
-+# CONFIG_HAVE_KPROBES is not set
-+# CONFIG_HAVE_KRETPROBES is not set
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+# CONFIG_KMOD is not set
-+CONFIG_BLOCK=y
-+CONFIG_LBD=y
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-+
-+#
-+# Platform dependent setup
-+#
-+# CONFIG_SUN3 is not set
-+CONFIG_COLDFIRE=y
-+CONFIG_CFV4E=y
-+CONFIG_MCD_DMA=y
-+# CONFIG_AMIGA is not set
-+# CONFIG_ATARI is not set
-+# CONFIG_MAC is not set
-+# CONFIG_APOLLO is not set
-+# CONFIG_VME is not set
-+# CONFIG_HP300 is not set
-+# CONFIG_SUN3X is not set
-+# CONFIG_Q40 is not set
-+
-+#
-+# Processor type
-+#
-+# CONFIG_M68020 is not set
-+# CONFIG_M68030 is not set
-+# CONFIG_M68040 is not set
-+# CONFIG_M68060 is not set
-+# CONFIG_M5445X is not set
-+CONFIG_M547X_8X=y
-+# CONFIG_M547X is not set
-+CONFIG_M548X=y
-+# CONFIG_M5475AFE is not set
-+# CONFIG_M5475BFE is not set
-+# CONFIG_M5475CFE is not set
-+# CONFIG_M5475DFE is not set
-+# CONFIG_M5475EFE is not set
-+# CONFIG_M5475FFE is not set
-+# CONFIG_M5485AFE is not set
-+# CONFIG_M5485BFE is not set
-+CONFIG_M5485CFE=y
-+# CONFIG_M5485DFE is not set
-+# CONFIG_M5485EFE is not set
-+# CONFIG_M5485FFE is not set
-+CONFIG_MCFCLK=200000000
-+# CONFIG_MCF_USER_HALT is not set
-+CONFIG_MMU_CFV4E=y
-+CONFIG_SDRAM_BASE=0x00000000
-+CONFIG_SDRAM_SIZE=0x04000000
-+CONFIG_NOR_FLASH_BASE=0xE0000000
-+# CONFIG_M68KFPU_EMU is not set
-+CONFIG_ADVANCED=y
-+# CONFIG_RMW_INSNS is not set
-+CONFIG_SINGLE_MEMORY_CHUNK=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_NEED_MULTIPLE_NODES=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+
-+#
-+# General setup
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_PROC_HARDWARE=y
-+CONFIG_ZONE_DMA=y
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_MULTIPLE_TABLES is not set
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+CONFIG_INET_AH=y
-+CONFIG_INET_ESP=y
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_STANDALONE is not set
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+# CONFIG_MTD is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=64000
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+CONFIG_COLDFIRE_SEC=y
-+CONFIG_SEC_DEVICE=y
-+# CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+CONFIG_HAVE_IDE=y
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+# CONFIG_PHYLIB is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+CONFIG_FEC_548x=y
-+CONFIG_FEC_548x_AUTO_NEGOTIATION=y
-+# CONFIG_FEC_548x_ENABLE_FEC2 is not set
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+CONFIG_SERIO_SERPORT=y
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_COLDFIRE=y
-+# CONFIG_SERIAL_COLDFIRE_IRDA is not set
-+# CONFIG_SERIAL_MCF is not set
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_GEN_RTC is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+# CONFIG_I2C_CHARDEV is not set
-+
-+#
-+# I2C Algorithms
-+#
-+# CONFIG_I2C_ALGOBIT is not set
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+CONFIG_I2C_MCF548x=y
-+# CONFIG_I2C_MCF is not set
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+CONFIG_SPI_DEBUG=y
-+# CONFIG_COLDFIRE_EDMA is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+# CONFIG_SPI_BITBANG is not set
-+CONFIG_SPI_COLDFIRE=y
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+# CONFIG_SPI_COLDFIRE_SSI_AUDIO is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_WATCHDOG is not set
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+CONFIG_DAB=y
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+CONFIG_VIDEO_OUTPUT_CONTROL=m
-+# CONFIG_FB is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+CONFIG_HID_DEBUG=y
-+# CONFIG_HIDRAW is not set
-+# CONFIG_USB_SUPPORT is not set
-+# CONFIG_MMC is not set
-+# CONFIG_MEMSTICK is not set
-+# CONFIG_NEW_LEDS is not set
-+# CONFIG_RTC_CLASS is not set
-+
-+#
-+# Userspace I/O
-+#
-+# CONFIG_UIO is not set
-+
-+#
-+# Character devices
-+#
-+# CONFIG_SERIAL_CONSOLE is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_INOTIFY is not set
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+CONFIG_NTFS_FS=y
-+# CONFIG_NTFS_DEBUG is not set
-+CONFIG_NTFS_RW=y
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+# CONFIG_PROC_KCORE is not set
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=y
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+CONFIG_ROMFS_FS=y
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+# CONFIG_NFS_V3 is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_BIND34 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+CONFIG_DEBUG_SLAB=y
-+# CONFIG_DEBUG_SLAB_LEAK is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_DEBUG_INFO=y
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+# CONFIG_FRAME_POINTER is not set
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
-+CONFIG_BOOTPARAM=y
-+CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.163.2:/tftpboot/ltib ip=172.27.163.3:172.27.163.2:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)"
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_AEAD=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+# CONFIG_CRYPTO_SEQIV is not set
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_HMAC=y
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_ECB is not set
-+CONFIG_CRYPTO_CBC=y
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_XTS is not set
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+CONFIG_CRYPTO_TEST=m
-+CONFIG_CRYPTO_AUTHENC=y
-+# CONFIG_CRYPTO_LZO is not set
-+# CONFIG_CRYPTO_HW is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_CRC_CCITT=y
-+CONFIG_CRC16=y
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+CONFIG_LIBCRC32C=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
---- a/arch/m68k/Kconfig
-+++ b/arch/m68k/Kconfig
-@@ -11,6 +11,14 @@ config MMU
- 	bool
- 	default y
- 
-+config GENERIC_TIME
-+        bool
-+        default n
-+
-+config GENERIC_CLOCKEVENTS
-+        bool
-+        default n
-+
- config RWSEM_GENERIC_SPINLOCK
- 	bool
- 	default y
-@@ -48,7 +56,7 @@ config ARCH_MAY_HAVE_PC_FDC
- 	default y
- 
- config NO_IOPORT
--	def_bool y
-+	def_bool !(M5445X || M547X_8X)
- 
- config NO_DMA
- 	def_bool SUN3
-@@ -119,6 +127,29 @@ config SUN3
- 
- 	  If you don't want to compile a kernel exclusively for a Sun 3, say N.
- 
-+config COLDFIRE
-+	bool "ColdFire V4e support"
-+	default y
-+	select CFV4E
-+	help
-+	  Say Y if you want to build a kernel to run on one of the ColdFire
-+	  V4e boards.
-+
-+config CFV4E
-+	bool
-+	depends on COLDFIRE
-+	select MMU_CFV4E if MMU
-+	default y
-+
-+config MCD_DMA
-+	bool "ColdFire MCD DMA support"
-+	depends on M547X_8X
-+	default y
-+	help
-+	  This enables support for the ColdFire 547x/548x family
-+	  multichannel DMA support.  Many drivers need it.
-+	  If you want it, say Y
-+
- config AMIGA
- 	bool "Amiga support"
- 	depends on !MMU_SUN3
-@@ -144,9 +175,9 @@ config HADES
- 	  to use this kernel on a Hades, say Y here; otherwise say N.
- 
- config PCI
--	bool
--	depends on HADES
--	default y
-+	bool "PCI bus support"
-+	depends on HADES || M54455 || M547X_8X
-+	default n
- 	help
- 	  Find out whether you have a PCI motherboard. PCI is the name of a
- 	  bus system, i.e. the way the CPU talks to the other stuff inside
-@@ -294,14 +325,142 @@ config M68060
- 	  If you anticipate running this kernel on a computer with a MC68060
- 	  processor, say Y. Otherwise, say N.
- 
-+config M5445X
-+	bool "MCF5445x support"
-+	depends on COLDFIRE
-+	help
-+          This option will add support for the MCF5445 processor with mmu.
-+
-+config M54451
-+	bool
-+	depends on M5445X
-+	default n
-+
-+config M54455
-+	bool
-+	depends on M5445X
-+	default n
-+
-+choice
-+	prompt "Model"
-+	depends on M5445X
-+	default M54451EVB
-+	config M54451EVB
-+		bool "M54451EVB"
-+		select M54451
-+	config M54455EVB
-+		bool "M54455EVB"
-+		select M54455
-+endchoice
-+
-+
-+config M547X_8X
-+	bool "MCF547x/MCF548x support"
-+	depends on COLDFIRE
-+	help
-+          This option will add support for the MCF547x/MCF548x processor with mmu.
-+
-+config M547X
-+	bool
-+	depends on M547X_8X
-+	default n
-+
-+config M548X
-+	bool
-+	depends on M547X_8X
-+	default n
-+
-+choice
-+	prompt "Model"
-+	depends on M547X_8X
-+	default M5485CFE
-+	config M5475AFE
-+		bool "MCF5475AFE"
-+		select M547X
-+	config M5475BFE
-+		bool "MCF5475BFE"
-+		select M547X
-+	config M5475CFE
-+		bool "MCF5475CFE"
-+		select M547X
-+	config M5475DFE
-+		bool "MCF5475DFE"
-+		select M547X
-+	config M5475EFE
-+		bool "MCF5475EFE"
-+		select M547X
-+	config M5475FFE
-+		bool "MCF5475FFE"
-+		select M547X
-+
-+	config M5485AFE
-+		bool "MCF5485AFE"
-+		select M548X
-+	config M5485BFE
-+		bool "MCF5485BFE"
-+		select M548X
-+	config M5485CFE
-+		bool "MCF5485CFE"
-+		select M548X
-+	config M5485DFE
-+		bool "MCF5485DFE"
-+		select M548X
-+	config M5485EFE
-+		bool "MCF5485EFE"
-+		select M548X
-+	config M5485FFE
-+		bool "MCF5485FFE"
-+		select M548X
-+
-+endchoice
-+
-+config MCFCLK
-+	int
-+	default 266666666 if M54455EVB
-+	default 240000000 if M54451EVB
-+	default 266000000 if M547X
-+	default 200000000 if M548X
-+	help
-+	  Coldfire System clock.
-+
-+config MCF_USER_HALT
-+	bool "Coldfire User Halt Enable"
-+	depends on M5445X || M547X_8X
-+	default n
-+	help
-+	  Enables the HALT instruction in User Mode.
-+
- config MMU_MOTOROLA
- 	bool
--	depends on MMU && !MMU_SUN3
-+	depends on MMU && !MMU_SUN3 && !COLDFIRE
- 	default y
- 
- config MMU_SUN3
- 	bool
- 
-+config MMU_CFV4E
-+	bool
-+
-+config SDRAM_BASE
-+	hex
-+	depends on COLDFIRE
-+	default 0x40000000 if M5445X
-+	default 0x00000000 if M547X_8X
-+
-+config SDRAM_SIZE
-+	hex
-+	depends on COLDFIRE
-+	default 0x08000000 if M54451EVB
-+	default 0x10000000 if M54455EVB
-+	default 0x04000000 if M547X_8X
-+
-+config NOR_FLASH_BASE
-+	hex "NOR Flash Base Address"
-+	depends on COLDFIRE
-+	default 0x00000000 if M54451EVB
-+	default 0x00000000 if M54455EVB
-+	default 0xE0000000 if M547X_8X
-+
- config M68KFPU_EMU
- 	bool "Math emulation support (EXPERIMENTAL)"
- 	depends on EXPERIMENTAL
-@@ -468,6 +627,14 @@ config ZONE_DMA
- source "drivers/pci/Kconfig"
- 
- source "drivers/zorro/Kconfig"
-+endmenu
-+
-+menu "Power management options"
-+
-+config PM
-+	bool "Power Management support"
-+	help
-+	  Support processor power management modes
- 
- endmenu
- 
-@@ -647,7 +814,7 @@ config DN_SERIAL
- 
- config SERIAL_CONSOLE
- 	bool "Support for serial port console"
--	depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
-+	depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO || COLDFIRE) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL || SERIAL_COLDFIRE)
- 	---help---
- 	  If you say Y here, it will be possible to use a serial port as the
- 	  system console (the system console is the device which receives all
---- a/arch/m68k/Kconfig.debug
-+++ b/arch/m68k/Kconfig.debug
-@@ -2,4 +2,13 @@ menu "Kernel hacking"
- 
- source "lib/Kconfig.debug"
- 
-+config BOOTPARAM
-+	bool 'Compiled-in Kernel Boot Parameter'
-+	depends on COLDFIRE
-+
-+config BOOTPARAM_STRING
-+	string 'Kernel Boot Parameter'
-+	default 'console=ttyS0,115200'
-+	depends on BOOTPARAM
-+
- endmenu
---- a/arch/m68k/kernel/asm-offsets.c
-+++ b/arch/m68k/kernel/asm-offsets.c
-@@ -58,8 +58,15 @@ int main(void)
- 	DEFINE(PT_A2, offsetof(struct pt_regs, a2));
- 	DEFINE(PT_PC, offsetof(struct pt_regs, pc));
- 	DEFINE(PT_SR, offsetof(struct pt_regs, sr));
-+#ifdef CONFIG_COLDFIRE
-+	/* Need to get the context out of struct mm for ASID setting */
-+	DEFINE(MM_CONTEXT, offsetof(struct mm_struct, context));
-+	/* Coldfire exception frame has vector *before* pc */
-+	DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) - 4);
-+#else
- 	/* bitfields are a bit difficult */
- 	DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4);
-+#endif
- 
- 	/* offsets into the irq_handler struct */
- 	DEFINE(IRQ_HANDLER, offsetof(struct irq_node, handler));
---- /dev/null
-+++ b/arch/m68k/kernel/bios32_mcf548x.c
-@@ -0,0 +1,631 @@
-+/*
-+ * bios32.c - PCI BIOS functions for m68k systems.
-+ *
-+ * Written by Wout Klaren.
-+ *
-+ * Based on the DEC Alpha bios32.c by Dave Rusling and David Mosberger.
-+ */
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+
-+#if 0
-+# define DBG_DEVS(args)		printk args
-+#else
-+# define DBG_DEVS(args)
-+#endif
-+
-+#ifdef CONFIG_PCI
-+
-+/*
-+ * PCI support for Linux/m68k. Currently only the Hades is supported.
-+ *
-+ * The support for PCI bridges in the DEC Alpha version has
-+ * been removed in this version.
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/slab.h>
-+#include <linux/mm.h>
-+
-+#include <asm/io.h>
-+#include <asm/pci.h>
-+#include <asm/uaccess.h>
-+
-+#define KB		1024
-+#define MB		(1024*KB)
-+#define GB		(1024*MB)
-+
-+#define MAJOR_REV	0
-+#define MINOR_REV	5
-+
-+/*
-+ * Align VAL to ALIGN, which must be a power of two.
-+ */
-+
-+#define MAX(val1, val2)		(((val1) > (val2)) ? val1 : val2)
-+
-+/*
-+ * Offsets relative to the I/O and memory base addresses from where resources
-+ * are allocated.
-+ */
-+
-+#ifdef CONFIG_COLDFIRE
-+#define IO_ALLOC_OFFSET		0x00000100
-+#define MEM_ALLOC_OFFSET	0x00000000
-+#else /* CONFIG_COLDFIRE */
-+#define IO_ALLOC_OFFSET		0x00004000
-+#define MEM_ALLOC_OFFSET	0x04000000
-+#endif /* CONFIG_COLDFIRE */
-+
-+/*
-+ * Declarations of hardware specific initialisation functions.
-+ */
-+
-+extern struct pci_bus_info *init_hades_pci(void);
-+
-+/*
-+ * Bus info structure of the PCI bus. A pointer to this structure is
-+ * put in the sysdata member of the pci_bus structure.
-+ */
-+
-+static struct pci_bus_info *bus_info;
-+
-+static int pci_modify = 1;		/* If set, layout the PCI bus ourself. */
-+static int skip_vga;			/* If set do not modify base addresses
-+					   of vga cards.*/
-+static int disable_pci_burst;		/* If set do not allow PCI bursts. */
-+
-+static unsigned int io_base;
-+static unsigned int mem_base;
-+
-+/*
-+ * static void disable_dev(struct pci_dev *dev)
-+ *
-+ * Disable PCI device DEV so that it does not respond to I/O or memory
-+ * accesses.
-+ *
-+ * Parameters:
-+ *
-+ * dev	- device to disable.
-+ */
-+
-+static void __init disable_dev(struct pci_dev *dev)
-+{
-+	unsigned short cmd;
-+
-+	if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) ||
-+	     (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) ||
-+	     (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga)
-+		return;
-+
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+
-+	cmd &= (~PCI_COMMAND_IO & ~PCI_COMMAND_MEMORY & ~PCI_COMMAND_MASTER);
-+	pci_write_config_word(dev, PCI_COMMAND, cmd);
-+}
-+
-+/* Stolen from pcibios_enable_resources/i386 */
-+int pcibios_enable_device(struct pci_dev *dev, int mask)
-+{
-+	u16 cmd, old_cmd;
-+	int idx;
-+	struct resource *r;
-+
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	old_cmd = cmd;
-+	for(idx=0; idx<6; idx++) {
-+		/* Only set up the requested stuff */
-+		if (!(mask & (1<<idx)))
-+			continue;
-+
-+		r = &dev->resource[idx];
-+		if (!r->start && r->end) {
-+			printk("PCI: Device %s not available because"
-+				" of resource collisions\n", dev->dev.bus_id);
-+			return -EINVAL;
-+		}
-+		if (r->flags & IORESOURCE_IO)
-+			cmd |= PCI_COMMAND_IO;
-+		if (r->flags & IORESOURCE_MEM)
-+			cmd |= PCI_COMMAND_MEMORY;
-+	}
-+	if (dev->resource[PCI_ROM_RESOURCE].start)
-+		cmd |= PCI_COMMAND_MEMORY;
-+	if (cmd != old_cmd) {
-+		printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->dev.bus_id, old_cmd, cmd);
-+		pci_write_config_word(dev, PCI_COMMAND, cmd);
-+	}
-+	return 0;
-+}
-+
-+/*
-+ * static void layout_dev(struct pci_dev *dev)
-+ *
-+ * Layout memory and I/O for a device.
-+ *
-+ * Parameters:
-+ *
-+ * device	- device to layout memory and I/O for.
-+ */
-+
-+static void __init layout_dev(struct pci_dev *dev)
-+{
-+	unsigned short cmd;
-+	unsigned int base, mask, size, reg;
-+	unsigned int alignto;
-+	int i;
-+
-+	/*
-+	 * Skip video cards if requested.
-+	 */
-+	if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) ||
-+	     (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) ||
-+	     (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga){
-+		printk("%s: VGA\n",__FUNCTION__);
-+		return;
-+	}
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+
-+	for (reg = PCI_BASE_ADDRESS_0, i = 0; reg <= PCI_BASE_ADDRESS_5; reg += 4, i++)
-+	{
-+		/*
-+		 * Figure out how much space and of what type this
-+		 * device wants.
-+		 */
-+
-+		pci_write_config_dword(dev, reg, 0xffffffff);
-+		pci_read_config_dword(dev, reg, &base);
-+		if (!base)
-+		{
-+			/* this base-address register is unused */
-+			dev->resource[i].start = 0;
-+			dev->resource[i].end = 0;
-+			dev->resource[i].flags = 0;
-+			continue;
-+		}
-+
-+		/*
-+		 * We've read the base address register back after
-+		 * writing all ones and so now we must decode it.
-+		 */
-+	
-+		if (base & PCI_BASE_ADDRESS_SPACE_IO)
-+		{
-+			/*
-+			 * I/O space base address register.
-+			 */
-+
-+			cmd |= PCI_COMMAND_IO;
-+
-+			base &= PCI_BASE_ADDRESS_IO_MASK;
-+			mask = (~base << 1) | 0x1;
-+			size = (mask & base) & 0xffffffff;
-+
-+			/*
-+			 * Align to multiple of size of minimum base.
-+			 */
-+
-+#ifdef CONFIG_COLDFIRE
-+			alignto = MAX(PAGE_SIZE, size) ;
-+#else /* CONFIG_COLDFIRE */
-+			alignto = MAX(0x040, size) ;
-+#endif /* CONFIG_COLDFIRE */
-+			base = ALIGN(io_base, alignto);
-+			io_base = base + size;
-+			pci_write_config_dword(dev, reg, base | PCI_BASE_ADDRESS_SPACE_IO);
-+
-+			dev->resource[i].start = base;
-+			dev->resource[i].end = dev->resource[i].start + size - 1;
-+			dev->resource[i].flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
-+
-+			DBG_DEVS(("layout_dev: IO address: %x\n", base));
-+		}
-+		else
-+		{
-+			unsigned int type;
-+
-+			/*
-+			 * Memory space base address register.
-+			 */
-+
-+			cmd |= PCI_COMMAND_MEMORY;
-+			type = base & PCI_BASE_ADDRESS_MEM_TYPE_MASK;
-+			base &= PCI_BASE_ADDRESS_MEM_MASK;
-+			mask = (~base << 1) | 0x1;
-+			size = (mask & base) & 0xffffffff;
-+			switch (type)
-+			{
-+			case PCI_BASE_ADDRESS_MEM_TYPE_32:
-+			case PCI_BASE_ADDRESS_MEM_TYPE_64:
-+				break;
-+
-+			case PCI_BASE_ADDRESS_MEM_TYPE_1M:
-+				printk("bios32 WARNING: slot %d, function %d "
-+				       "requests memory below 1MB---don't "
-+				       "know how to do that.\n",
-+				       PCI_SLOT(dev->devfn),
-+				       PCI_FUNC(dev->devfn));
-+				continue;
-+			}
-+			DBG_DEVS(("%s MEM: base %x,type %x,mask %x,size %x\n",
-+				__FUNCTION__, base, type, mask, size));
-+			/*
-+			 * Align to multiple of size of minimum base.
-+			 */
-+
-+			alignto = max_t(unsigned int, 0x1000, size);
-+			base = ALIGN(mem_base, alignto);
-+			mem_base = base + size;
-+			pci_write_config_dword(dev, reg, base);
-+
-+			dev->resource[i].start = base;
-+			dev->resource[i].end = dev->resource[i].start + size - 1;
-+			dev->resource[i].flags = IORESOURCE_MEM;
-+			DBG_DEVS(("%s MEM :base %x,size %x\n",
-+				__FUNCTION__, base, size));
-+			if (type == PCI_BASE_ADDRESS_MEM_TYPE_64)
-+			{
-+				/*
-+				 * 64-bit address, set the highest 32 bits
-+				 * to zero.
-+				 */
-+
-+				reg += 4;
-+				pci_write_config_dword(dev, reg, 0);
-+
-+				i++;
-+				dev->resource[i].start = 0;
-+				dev->resource[i].end = 0;
-+				dev->resource[i].flags = 0;
-+				printk("%s:type == 64\n",__FUNCTION__);
-+			}
-+		}
-+	}
-+
-+	/*
-+	 * Enable device:
-+	 */
-+
-+	if (dev->class >> 8 == PCI_CLASS_NOT_DEFINED ||
-+	    dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA ||
-+	    dev->class >> 8 == PCI_CLASS_DISPLAY_VGA ||
-+	    dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)
-+	{
-+		/*
-+		 * All of these (may) have I/O scattered all around
-+		 * and may not use i/o-base address registers at all.
-+		 * So we just have to always enable I/O to these
-+		 * devices.
-+		 */
-+		cmd |= PCI_COMMAND_IO;
-+	}
-+
-+	pci_write_config_word(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER);
-+
-+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, (disable_pci_burst) ? 0 : 32);
-+
-+	if (bus_info != NULL)
-+		bus_info->conf_device(dev);	/* Machine dependent configuration. */
-+
-+	printk(KERN_INFO "layout_dev: bus %d  slot 0x%x  VID 0x%x  DID 0x%x  class 0x%x\n",
-+		dev->bus->number, PCI_SLOT(dev->devfn),
-+		dev->vendor, dev->device, dev->class);
-+}
-+
-+/*
-+ * static void layout_bus(struct pci_bus *bus)
-+ *
-+ * Layout memory and I/O for all devices on the given bus.
-+ *
-+ * Parameters:
-+ *
-+ * bus	- bus.
-+ */
-+
-+static void __init layout_bus(struct pci_bus *bus)
-+{
-+	unsigned int bio, bmem;
-+	struct pci_dev *dev;
-+
-+	DBG_DEVS(("layout_bus: starting bus %d\n", bus->number));
-+
-+	if (list_empty(&bus->devices) && list_empty(&bus->children))
-+		return;
-+
-+	/*
-+	 * Align the current bases on appropriate boundaries (4K for
-+	 * IO and 1MB for memory).
-+	 */
-+
-+	bio = io_base = ALIGN(io_base, 4*KB);
-+	bmem = mem_base = ALIGN(mem_base, 1*MB);
-+
-+	/*
-+	 * PCI devices might have been setup by a PCI BIOS emulation
-+	 * running under TOS. In these cases there is a
-+	 * window during which two devices may have an overlapping
-+	 * address range. To avoid this causing trouble, we first
-+	 * turn off the I/O and memory address decoders for all PCI
-+	 * devices.  They'll be re-enabled only once all address
-+	 * decoders are programmed consistently.
-+	 */
-+
-+	DBG_DEVS(("layout_bus: disable_dev for bus %d\n", bus->number));
-+
-+#ifdef NL_ORIGINAL
-+	for (dev = bus->devices; dev; dev = dev->sibling)
-+#else
-+	dev = NULL;
-+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
-+#endif
-+	{
-+		if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) ||
-+		    (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA))
-+			disable_dev(dev);
-+	}
-+
-+	/*
-+	 * Allocate space to each device:
-+	 */
-+
-+	DBG_DEVS(("layout_bus: starting bus %d devices\n", bus->number));
-+
-+#ifdef NL_ORIGINAL
-+	for (dev = bus->devices; dev; dev = dev->sibling)
-+#else
-+	dev = NULL;
-+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
-+#endif
-+	{
-+		if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) ||
-+		    (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA))
-+			layout_dev(dev);
-+	}
-+
-+	DBG_DEVS(("layout_bus: bus %d finished\n", bus->number));
-+}
-+
-+/*
-+ * static void pcibios_fixup(void)
-+ *
-+ * Layout memory and I/O of all devices on the PCI bus if 'pci_modify' is
-+ * true. This might be necessary because not every m68k machine with a PCI
-+ * bus has a PCI BIOS. This function should be called right after
-+ * pci_scan_bus() in pcibios_init().
-+ */
-+
-+static void __init pcibios_fixup(void)
-+{
-+	DBG_DEVS(("%s\n", __FUNCTION__));
-+	if (pci_modify)
-+	{
-+		/*
-+		 * Set base addresses for allocation of I/O and memory space.
-+		 */
-+
-+		io_base = bus_info->io_space.start + IO_ALLOC_OFFSET;
-+		mem_base = bus_info->mem_space.start + MEM_ALLOC_OFFSET;
-+
-+		/*
-+		 * Scan the tree, allocating PCI memory and I/O space.
-+		 */
-+
-+#ifdef NL_ORIGINAL
-+		layout_bus(pci_bus_b(pci_root.next));
-+#else
-+		layout_bus(pci_bus_b(pci_root_buses.next));
-+#endif
-+	}
-+
-+	/*
-+	 * Fix interrupt assignments, etc.
-+	 */
-+
-+	bus_info->fixup(pci_modify);
-+}
-+
-+/*
-+ * static void pcibios_claim_resources(struct pci_bus *bus)
-+ *
-+ * Claim all resources that are assigned to devices on the given bus.
-+ *
-+ * Parameters:
-+ *
-+ * bus	- bus.
-+ */
-+
-+static void __init pcibios_claim_resources(struct pci_bus *bus)
-+{
-+	struct pci_dev *dev;
-+	int i;
-+	DBG_DEVS(("%s\n", __FUNCTION__));
-+#ifdef NL_ORIGINAL
-+	while (bus)
-+#else
-+	while ((bus = pci_find_next_bus(bus)) != NULL)
-+#endif
-+	{
-+
-+#ifdef NL_ORIGINAL
-+		for (dev = bus->devices; (dev != NULL); dev = dev->sibling)
-+#else
-+		dev = NULL;
-+		while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
-+#endif
-+		{
-+			for (i = 0; i < PCI_NUM_RESOURCES; i++)
-+			{
-+				struct resource *r = &dev->resource[i];
-+				struct resource *pr;
-+				struct pci_bus_info *bus_info = 
-+					(struct pci_bus_info *) dev->sysdata;
-+
-+				if ((r->start == 0) || (r->parent != NULL))
-+					continue;
-+
-+#ifdef CONFIG_COLDFIRE
-+				if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE)
-+					continue;
-+#endif /* CONFIG_COLDFIRE */
-+#if 1
-+				if (r->flags & IORESOURCE_IO)
-+					pr = &bus_info->io_space;
-+				else
-+					pr = &bus_info->mem_space;
-+#else
-+				if (r->flags & IORESOURCE_IO)
-+					pr = &ioport_resource;
-+				else
-+					pr = &iomem_resource;
-+#endif
-+				if (request_resource(pr, r) < 0)
-+				{
-+#ifdef NL_ORIGINAL
-+					DBG_DEVS(("PCI: Address space collision on "
-+						"region %d of device %s\n", i, dev->name));
-+#else
-+					printk("PCI: Address space collision on region %d of device %s\n", i, dev->dev.bus_id);
-+#endif
-+				}
-+			}
-+		}
-+
-+#ifdef NL_ORIGINAL
-+		if (bus->children)
-+			pcibios_claim_resources(bus->children);
-+#else
-+		if (!list_empty(&bus->children))
-+			pcibios_claim_resources(pci_bus_b(bus->children.next));
-+#endif
-+
-+#ifdef NL_ORIGINAL
-+		bus = bus->next;
-+#endif
-+	}
-+}
-+
-+/*
-+ * int pcibios_assign_resource(struct pci_dev *dev, int i)
-+ *
-+ * Assign a new address to a PCI resource.
-+ *
-+ * Parameters:
-+ *
-+ * dev	- device.
-+ * i	- resource.
-+ *
-+ * Result: 0 if successful.
-+ */
-+
-+int __init pcibios_assign_resource(struct pci_dev *dev, int i)
-+{
-+	struct resource *r = &dev->resource[i];
-+	struct resource *pr = pci_find_parent_resource(dev, r);
-+	unsigned long size = r->end + 1;
-+	DBG_DEVS(("%s:IO_ALLOC_OFFSET %x\n", __FUNCTION__, IO_ALLOC_OFFSET));
-+	if (!pr)
-+		return -EINVAL;
-+
-+	if (r->flags & IORESOURCE_IO)
-+	{
-+		DBG_DEVS(("%s:IORESOURCE_IO:start %x, size %lx\n",
-+			__FUNCTION__, bus_info->io_space.start, size));
-+		if (size > 0x100)
-+			return -EFBIG;
-+
-+#ifdef NL_ORIGINAL
-+		if (allocate_resource(pr, r, size, bus_info->io_space.start +
-+				      IO_ALLOC_OFFSET,  bus_info->io_space.end, 1024))
-+#else
-+		if (allocate_resource(pr, r, size, bus_info->io_space.start +
-+				   IO_ALLOC_OFFSET,  bus_info->io_space.end, 1024, NULL, NULL))
-+#endif
-+			return -EBUSY;
-+	}
-+	else
-+	{
-+		DBG_DEVS(("%s:IORESOURCE_MEM:start %x, size %lx\n",
-+				__FUNCTION__, bus_info->mem_space.start, size));
-+#ifdef NL_ORIGINAL
-+		if (allocate_resource(pr, r, size, bus_info->mem_space.start +
-+				      MEM_ALLOC_OFFSET, bus_info->mem_space.end, size))
-+#else
-+		if (allocate_resource(pr, r, size, bus_info->io_space.start +
-+				   IO_ALLOC_OFFSET,  bus_info->io_space.end, 1024, NULL, NULL))
-+#endif
-+			return -EBUSY;
-+	}
-+
-+	if (i < 6)
-+		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, r->start);
-+
-+	return 0;
-+}
-+
-+void pcibios_fixup_bus(struct pci_bus *bus)
-+{
-+	struct pci_dev *dev;
-+	void *sysdata;
-+
-+	sysdata = (bus->parent) ? bus->parent->sysdata : bus->sysdata;
-+
-+#ifdef NL_ORIGINAL
-+	for (dev = bus->devices; (dev != NULL); dev = dev->sibling)
-+#else
-+	dev = NULL;
-+	while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
-+#endif
-+		dev->sysdata = sysdata;
-+}
-+
-+int __init pcibios_init(void)
-+{
-+	printk("Linux/m68k PCI BIOS32 revision %x.%02x\n", MAJOR_REV, MINOR_REV);
-+
-+	bus_info = NULL;
-+#ifdef CONFIG_COLDFIRE
-+	bus_info = init_coldfire_pci();
-+#endif /* CONFIG_COLDFIRE */
-+#ifdef CONFIG_HADES
-+	if (MACH_IS_HADES)
-+		bus_info = init_hades_pci();
-+#endif
-+	if (bus_info != NULL)
-+	{
-+		printk("PCI: Probing PCI hardware\n");
-+		pci_scan_bus(0, bus_info->m68k_pci_ops, bus_info);
-+		pcibios_fixup();
-+#ifdef NL_ORIGINAL
-+		pcibios_claim_resources(pci_root);
-+#else
-+		pcibios_claim_resources(pci_bus_b(pci_root_buses.next));
-+#endif
-+	}
-+	else
-+		printk("PCI: No PCI bus detected\n");
-+	return 0;
-+}
-+
-+subsys_initcall(pcibios_init);
-+
-+char * pcibios_setup(char *str)
-+{
-+	if (!strcmp(str, "nomodify"))
-+	{
-+		pci_modify = 0;
-+		return NULL;
-+	}
-+	else if (!strcmp(str, "skipvga"))
-+	{
-+		skip_vga = 1;
-+		return NULL;
-+	}
-+	else if (!strcmp(str, "noburst"))
-+	{
-+		disable_pci_burst = 1;
-+		return NULL;
-+	}
-+
-+	return str;
-+}
-+#endif /* CONFIG_PCI */
---- a/arch/m68k/kernel/dma.c
-+++ b/arch/m68k/kernel/dma.c
-@@ -11,12 +11,24 @@
- #include <linux/kernel.h>
- #include <linux/scatterlist.h>
- #include <linux/vmalloc.h>
--
-+#include <linux/pci.h>
- #include <asm/pgalloc.h>
- 
- void *dma_alloc_coherent(struct device *dev, size_t size,
- 			 dma_addr_t *handle, gfp_t flag)
- {
-+#if	defined(CONFIG_M547X_8X) | defined(CONFIG_M54455)
-+        /*
-+	* On the M5445x platform the memory allocated with GFP_DMA
-+	* is guaranteed to be DMA'able.
-+	*/
-+        void *addr;
-+
-+        size = PAGE_ALIGN(size);
-+        addr = kmalloc(size, GFP_DMA);
-+        *handle = virt_to_phys(addr);
-+        return addr;
-+#else
- 	struct page *page, **map;
- 	pgprot_t pgprot;
- 	void *addr;
-@@ -55,6 +67,7 @@ void *dma_alloc_coherent(struct device *
- 	kfree(map);
- 
- 	return addr;
-+#endif
- }
- EXPORT_SYMBOL(dma_alloc_coherent);
- 
-@@ -62,7 +75,11 @@ void dma_free_coherent(struct device *de
- 		       void *addr, dma_addr_t handle)
- {
- 	pr_debug("dma_free_coherent: %p, %x\n", addr, handle);
-+#if	defined(CONFIG_M547X_8X) | defined(CONFIG_M54455)
-+	kfree(addr);
-+#else
- 	vfree(addr);
-+#endif
- }
- EXPORT_SYMBOL(dma_free_coherent);
- 
---- a/arch/m68k/kernel/Makefile
-+++ b/arch/m68k/kernel/Makefile
-@@ -2,19 +2,27 @@
- # Makefile for the linux kernel.
- #
- 
--ifndef CONFIG_SUN3
--  extra-y := head.o
-+ifdef CONFIG_SUN3
-+  extra-y := sun3-head.o vmlinux.lds
-+  obj-y := entry.o signal.o ints.o
- else
--  extra-y := sun3-head.o
-+ifndef CONFIG_COLDFIRE
-+  extra-y := head.o vmlinux.lds
-+  obj-y := entry.o signal.o traps.o ints.o
-+  obj-$(CONFIG_PCI) += bios32.o
-+else   # CONFIG_COLDFIRE
-+  extra-y := ../coldfire/head.o vmlinux.lds
-+ifdef CONFIG_M547X_8X
-+  obj-$(CONFIG_PCI) += bios32_mcf548x.o
-+endif
-+endif
- endif
--extra-y	+= vmlinux.lds
- 
--obj-y	:= entry.o process.o traps.o ints.o signal.o ptrace.o module.o \
-+obj-y	+= process.o ptrace.o module.o \
- 	   sys_m68k.o time.o semaphore.o setup.o m68k_ksyms.o devres.o
- 
- devres-y = ../../../kernel/irq/devres.o
- 
--obj-$(CONFIG_PCI)	+= bios32.o
- obj-y$(CONFIG_MMU_SUN3) += dma.o	# no, it's not a typo
- 
- EXTRA_AFLAGS := -traditional
---- a/arch/m68k/kernel/process.c
-+++ b/arch/m68k/kernel/process.c
-@@ -191,6 +191,7 @@ EXPORT_SYMBOL(kernel_thread);
- 
- void flush_thread(void)
- {
-+#if !defined(CONFIG_COLDFIRE)
- 	unsigned long zero = 0;
- 	set_fs(USER_DS);
- 	current->thread.fs = __USER_DS;
-@@ -198,6 +199,14 @@ void flush_thread(void)
- 		asm volatile (".chip 68k/68881\n\t"
- 			      "frestore %0@\n\t"
- 			      ".chip 68k" : : "a" (&zero));
-+#else
-+	set_fs(USER_DS);
-+	current->thread.fs = USER_DS;
-+#if defined(CONFIG_FPU)
-+	if (!FPU_IS_EMU)
-+		asm volatile ("frestore %0@\n\t" : : "a" (&zero));
-+#endif
-+#endif
- }
- 
- /*
-@@ -261,6 +270,7 @@ int copy_thread(int nr, unsigned long cl
- 	 * Must save the current SFC/DFC value, NOT the value when
- 	 * the parent was last descheduled - RGH  10-08-96
- 	 */
-+#if !defined(CONFIG_COLDFIRE)
- 	p->thread.fs = get_fs().seg;
- 
- 	if (!FPU_IS_EMU) {
-@@ -272,9 +282,34 @@ int copy_thread(int nr, unsigned long cl
- 				"fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
- 				: : "m" (p->thread.fp[0]), "m" (p->thread.fpcntl[0])
- 				: "memory");
-+#else
-+	p->thread.fs = get_fs();
-+
-+#if defined(CONFIG_FPU)
-+	if (!FPU_IS_EMU) {
-+		/* Copy the current fpu state */
-+		asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0])
-+			      : "memory");
-+
-+		if (p->thread.fpstate[0]) {
-+			asm volatile ("fmovemd %/fp0-%/fp7,%0"
-+				      : : "m" (p->thread.fp[0])
-+				      : "memory");
-+			asm volatile ("fmovel %/fpiar,%0"
-+				      : : "m" (p->thread.fpcntl[0])
-+				      : "memory");
-+			asm volatile ("fmovel %/fpcr,%0"
-+				      : : "m" (p->thread.fpcntl[1])
-+				      : "memory");
-+			asm volatile ("fmovel %/fpsr,%0"
-+				      : : "m" (p->thread.fpcntl[2])
-+				      : "memory");
-+		}
- 		/* Restore the state in case the fpu was busy */
- 		asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
- 	}
-+#endif
-+#endif
- 
- 	return 0;
- }
-@@ -283,7 +318,9 @@ int copy_thread(int nr, unsigned long cl
- 
- int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
- {
-+#if !defined(CONFIG_COLDFIRE) || defined(CONFIG_FPU)
- 	char fpustate[216];
-+#endif
- 
- 	if (FPU_IS_EMU) {
- 		int i;
-@@ -300,6 +337,7 @@ int dump_fpu (struct pt_regs *regs, stru
- 	}
- 
- 	/* First dump the fpu context to avoid protocol violation.  */
-+#if !defined(CONFIG_COLDFIRE)
- 	asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
- 	if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
- 		return 0;
-@@ -310,6 +348,25 @@ int dump_fpu (struct pt_regs *regs, stru
- 	asm volatile ("fmovemx %/fp0-%/fp7,%0"
- 		:: "m" (fpu->fpregs[0])
- 		: "memory");
-+#elif defined(CONFIG_FPU)
-+	asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
-+	if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
-+		return 0;
-+
-+	asm volatile ("fmovel %/fpiar,%0"
-+		      : : "m" (fpu->fpcntl[0])
-+		      : "memory");
-+	asm volatile ("fmovel %/fpcr,%0"
-+		      : : "m" (fpu->fpcntl[1])
-+		      : "memory");
-+	asm volatile ("fmovel %/fpsr,%0"
-+		      : : "m" (fpu->fpcntl[2])
-+		      : "memory");
-+	asm volatile ("fmovemd %/fp0-%/fp7,%0"
-+		      : : "m" (fpu->fpregs[0])
-+		      : "memory");
-+#endif
-+
- 	return 1;
- }
- EXPORT_SYMBOL(dump_fpu);
---- a/arch/m68k/kernel/setup.c
-+++ b/arch/m68k/kernel/setup.c
-@@ -67,13 +67,22 @@ EXPORT_SYMBOL(m68k_memory);
- 
- struct mem_info m68k_ramdisk;
- 
-+#if !defined(CONFIG_COLDFIRE)
- static char m68k_command_line[CL_SIZE];
-+#else
-+char m68k_command_line[CL_SIZE];
-+unsigned long uboot_info_stk;
-+EXPORT_SYMBOL(uboot_info_stk);
-+#endif
- 
- void (*mach_sched_init) (irq_handler_t handler) __initdata = NULL;
- /* machine dependent irq functions */
- void (*mach_init_IRQ) (void) __initdata = NULL;
- void (*mach_get_model) (char *model);
- int (*mach_get_hardware_list) (char *buffer);
-+#ifdef CONFIG_COLDFIRE
-+void (*mach_tick)(void);
-+#endif
- /* machine dependent timer functions */
- unsigned long (*mach_gettimeoffset) (void);
- int (*mach_hwclk) (int, struct rtc_time*);
-@@ -128,13 +137,17 @@ extern void config_hp300(void);
- extern void config_q40(void);
- extern void config_sun3x(void);
- 
-+#ifdef CONFIG_COLDFIRE
-+void coldfire_sort_memrec(void);
-+#endif
-+
- #define MASK_256K 0xfffc0000
- 
- extern void paging_init(void);
- 
- static void __init m68k_parse_bootinfo(const struct bi_record *record)
- {
--	while (record->tag != BI_LAST) {
-+	while ((record->tag != BI_LAST) && !(CONFIG_COLDFIRE)) {
- 		int unknown = 0;
- 		const unsigned long *data = record->data;
- 
-@@ -192,7 +205,11 @@ static void __init m68k_parse_bootinfo(c
- 					      record->size);
- 	}
- 
--	m68k_realnum_memory = m68k_num_memory;
-+#ifdef CONFIG_COLDFIRE
-+    coldfire_sort_memrec();
-+#endif
-+
-+    m68k_realnum_memory = m68k_num_memory;
- #ifdef CONFIG_SINGLE_MEMORY_CHUNK
- 	if (m68k_num_memory > 1) {
- 		printk("Ignoring last %i chunks of physical memory\n",
-@@ -205,7 +222,9 @@ static void __init m68k_parse_bootinfo(c
- void __init setup_arch(char **cmdline_p)
- {
- 	extern int _etext, _edata, _end;
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
- 	int i;
-+#endif
- 
- 	/* The bootinfo is located right after the kernel bss */
- 	m68k_parse_bootinfo((const struct bi_record *)&_end);
-@@ -220,9 +239,10 @@ void __init setup_arch(char **cmdline_p)
- 	 * We should really do our own FPU check at startup.
- 	 * [what do we do with buggy 68LC040s? if we have problems
- 	 *  with them, we should add a test to check_bugs() below] */
--#ifndef CONFIG_M68KFPU_EMU_ONLY
-+#if !defined(CONFIG_M68KFPU_EMU_ONLY) && defined(CONFIG_FPU)
- 	/* clear the fpu if we have one */
--	if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060)) {
-+	if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060|
-+			    FPU_CFV4E)) {
- 		volatile int zero = 0;
- 		asm volatile ("frestore %0" : : "m" (zero));
- 	}
-@@ -310,13 +330,18 @@ void __init setup_arch(char **cmdline_p)
- 		config_sun3x();
- 		break;
- #endif
-+#ifdef CONFIG_COLDFIRE
-+	case MACH_CFMMU:
-+		config_coldfire();
-+		break;
-+#endif
- 	default:
- 		panic("No configuration setup");
- 	}
- 
- 	paging_init();
- 
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
- 	for (i = 1; i < m68k_num_memory; i++)
- 		free_bootmem_node(NODE_DATA(i), m68k_memory[i].addr,
- 				  m68k_memory[i].size);
-@@ -343,6 +368,10 @@ void __init setup_arch(char **cmdline_p)
- 
- #endif /* !CONFIG_SUN3 */
- 
-+#ifdef CONFIG_COLDFIRE
-+	mmu_context_init();
-+#endif
-+
- /* set ISA defs early as possible */
- #if defined(CONFIG_ISA) && defined(MULTI_ISA)
- #if defined(CONFIG_Q40)
-@@ -373,6 +402,7 @@ static int show_cpuinfo(struct seq_file 
- #define LOOP_CYCLES_68030	(8)
- #define LOOP_CYCLES_68040	(3)
- #define LOOP_CYCLES_68060	(1)
-+#define LOOP_CYCLES_COLDFIRE	(2)
- 
- 	if (CPU_IS_020) {
- 		cpu = "68020";
-@@ -386,6 +416,9 @@ static int show_cpuinfo(struct seq_file 
- 	} else if (CPU_IS_060) {
- 		cpu = "68060";
- 		clockfactor = LOOP_CYCLES_68060;
-+	} else if (CPU_IS_CFV4E) {
-+		cpu = "ColdFire V4e";
-+		clockfactor = LOOP_CYCLES_COLDFIRE;
- 	} else {
- 		cpu = "680x0";
- 		clockfactor = 0;
-@@ -404,6 +437,8 @@ static int show_cpuinfo(struct seq_file 
- 		fpu = "68060";
- 	else if (m68k_fputype & FPU_SUNFPA)
- 		fpu = "Sun FPA";
-+	else if (m68k_fputype & FPU_CFV4E)
-+		fpu = "ColdFire V4e";
- 	else
- 		fpu = "none";
- #endif
-@@ -420,6 +455,8 @@ static int show_cpuinfo(struct seq_file 
- 		mmu = "Sun-3";
- 	else if (m68k_mmutype & MMU_APOLLO)
- 		mmu = "Apollo";
-+	else if (m68k_mmutype & MMU_CFV4E)
-+		mmu = "ColdFire";
- 	else
- 		mmu = "unknown";
- 
-@@ -482,7 +519,7 @@ int get_hardware_list(char *buffer)
- 
- void check_bugs(void)
- {
--#ifndef CONFIG_M68KFPU_EMU
-+#if !defined(CONFIG_M68KFPU_EMU) && !defined(CONFIG_M5445X)
- 	if (m68k_fputype == 0) {
- 		printk(KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
- 			"WHICH IS REQUIRED BY LINUX/M68K ***\n");
---- a/arch/m68k/kernel/sys_m68k.c
-+++ b/arch/m68k/kernel/sys_m68k.c
-@@ -29,6 +29,9 @@
- #include <asm/traps.h>
- #include <asm/page.h>
- #include <asm/unistd.h>
-+#ifdef CONFIG_COLDFIRE
-+#include <asm/cacheflush.h>
-+#endif
- 
- /*
-  * sys_pipe() is the normal C calling standard for creating
-@@ -257,6 +260,7 @@ asmlinkage int sys_ipc (uint call, int f
- 	return -EINVAL;
- }
- 
-+#ifndef CONFIG_COLDFIRE
- /* Convert virtual (user) address VADDR to physical address PADDR */
- #define virt_to_phys_040(vaddr)						\
- ({									\
-@@ -580,6 +584,7 @@ cache_flush_060 (unsigned long addr, int
-     }
-   return 0;
- }
-+#endif /* CONFIG_COLDFIRE */
- 
- /* sys_cacheflush -- flush (part of) the processor cache.  */
- asmlinkage int
-@@ -612,6 +617,7 @@ sys_cacheflush (unsigned long addr, int 
- 			goto out;
- 	}
- 
-+#ifndef CONFIG_COLDFIRE
- 	if (CPU_IS_020_OR_030) {
- 		if (scope == FLUSH_SCOPE_LINE && len < 256) {
- 			unsigned long cacr;
-@@ -656,6 +662,16 @@ sys_cacheflush (unsigned long addr, int 
- 		ret = cache_flush_060 (addr, scope, cache, len);
- 	    }
- 	}
-+#else /* CONFIG_COLDFIRE */
-+	if ((cache & FLUSH_CACHE_INSN) && (cache & FLUSH_CACHE_DATA))
-+		flush_bcache();
-+	else if (cache & FLUSH_CACHE_INSN)
-+		flush_icache();
-+	else
-+		flush_dcache();
-+
-+	ret = 0;
-+#endif /* CONFIG_COLDFIRE */
- out:
- 	unlock_kernel();
- 	return ret;
---- a/arch/m68k/kernel/time.c
-+++ b/arch/m68k/kernel/time.c
-@@ -40,6 +40,11 @@ static inline int set_rtc_mmss(unsigned 
-  */
- static irqreturn_t timer_interrupt(int irq, void *dummy)
- {
-+#ifdef CONFIG_COLDFIRE
-+	/* kick hardware timer if necessary */
-+	if (mach_tick)
-+		mach_tick();
-+#endif
- 	do_timer(1);
- #ifndef CONFIG_SMP
- 	update_process_times(user_mode(get_irq_regs()));
---- a/arch/m68k/kernel/vmlinux.lds.S
-+++ b/arch/m68k/kernel/vmlinux.lds.S
-@@ -1,10 +1,13 @@
- PHDRS
- {
--  text PT_LOAD FILEHDR PHDRS FLAGS (7);
-+  headers PT_PHDR PHDRS ;
-+  text PT_LOAD FILEHDR PHDRS FLAGS (5);
-   data PT_LOAD FLAGS (7);
- }
- #ifdef CONFIG_SUN3
- #include "vmlinux-sun3.lds"
-+#elif CONFIG_COLDFIRE
-+#include "../coldfire/vmlinux-cf.lds"
- #else
- #include "vmlinux-std.lds"
- #endif
---- a/arch/m68k/lib/checksum.c
-+++ b/arch/m68k/lib/checksum.c
-@@ -39,8 +39,131 @@
-  * computes a partial checksum, e.g. for TCP/UDP fragments
-  */
- 
-+#ifdef CONFIG_COLDFIRE
-+
-+static inline unsigned short from32to16(unsigned long x)
-+{
-+	/* add up 16-bit and 16-bit for 16+c bit */
-+	x = (x & 0xffff) + (x >> 16);
-+	/* add up carry.. */
-+	x = (x & 0xffff) + (x >> 16);
-+	return x;
-+}
-+
-+static unsigned long do_csum(const unsigned char *buff, int len)
-+{
-+	int odd, count;
-+	unsigned long result = 0;
-+
-+	if (len <= 0)
-+		goto out;
-+	odd = 1 & (unsigned long) buff;
-+	if (odd) {
-+		result = *buff;
-+		len--;
-+		buff++;
-+	}
-+	count = len >> 1;		/* nr of 16-bit words.. */
-+	if (count) {
-+		if (2 & (unsigned long) buff) {
-+			result += *(unsigned short *) buff;
-+			count--;
-+			len -= 2;
-+			buff += 2;
-+		}
-+		count >>= 1;		/* nr of 32-bit words.. */
-+		if (count) {
-+			unsigned long carry = 0;
-+			do {
-+				unsigned long w = *(unsigned long *) buff;
-+				count--;
-+				buff += 4;
-+				result += carry;
-+				result += w;
-+				carry = (w > result);
-+			} while (count);
-+			result += carry;
-+			result = (result & 0xffff) + (result >> 16);
-+		}
-+		if (len & 2) {
-+			result += *(unsigned short *) buff;
-+			buff += 2;
-+		}
-+	}
-+	if (len & 1)
-+		result += (*buff << 8);
-+	result = from32to16(result);
-+	if (odd)
-+		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-+out:
-+	return result;
-+}
-+
-+/*
-+ *	This is a version of ip_compute_csum() optimized for IP headers,
-+ *	which always checksum on 4 octet boundaries.
-+ */
-+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-+{
-+	return ~do_csum(iph, ihl*4);
-+}
-+EXPORT_SYMBOL(ip_fast_csum);
-+
-+/*
-+ * computes the checksum of a memory block at buff, length len,
-+ * and adds in "sum" (32-bit)
-+ *
-+ * returns a 32-bit number suitable for feeding into itself
-+ * or csum_tcpudp_magic
-+ *
-+ * this function must be called with even lengths, except
-+ * for the last fragment, which may be odd
-+ *
-+ * it's best to have buff aligned on a 32-bit boundary
-+ */
- __wsum csum_partial(const void *buff, int len, __wsum sum)
- {
-+	unsigned int result = do_csum(buff, len);
-+
-+	/* add in old sum, and carry.. */
-+	result += sum;
-+	if (sum > result)
-+		result += 1;
-+	return result;
-+}
-+EXPORT_SYMBOL(csum_partial);
-+
-+/*
-+ * copy from fs while checksumming, otherwise like csum_partial
-+ */
-+
-+__wsum
-+csum_partial_copy_from_user(const void __user *src, void *dst, int len,
-+			    __wsum sum, int *csum_err)
-+{
-+	if (csum_err) *csum_err = 0;
-+	memcpy(dst, src, len);
-+	return csum_partial(dst, len, sum);
-+}
-+EXPORT_SYMBOL(csum_partial_copy_from_user);
-+
-+/*
-+ * copy from ds while checksumming, otherwise like csum_partial
-+ */
-+
-+__wsum
-+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
-+{
-+	memcpy(dst, src, len);
-+	return csum_partial(dst, len, sum);
-+}
-+EXPORT_SYMBOL(csum_partial_copy_nocheck);
-+
-+#else /* !CONFIG_COLDFIRE */
-+
-+unsigned int
-+csum_partial(const unsigned char *buff, int len, unsigned int sum)
-+{
- 	unsigned long tmp1, tmp2;
- 	  /*
- 	   * Experiments with ethernet and slip connections show that buff
-@@ -423,3 +546,4 @@ csum_partial_copy_nocheck(const void *sr
-     return(sum);
- }
- EXPORT_SYMBOL(csum_partial_copy_nocheck);
-+#endif /* CONFIG_COLDFIRE */
---- a/arch/m68k/lib/muldi3.c
-+++ b/arch/m68k/lib/muldi3.c
-@@ -21,12 +21,22 @@ Boston, MA 02111-1307, USA.  */
- 
- #define BITS_PER_UNIT 8
- 
-+#ifdef CONFIG_COLDFIRE
-+#define umul_ppmm(w1, w0, u, v) \
-+  do { \
-+       unsigned long long x; \
-+       x = (unsigned long long)u * v; \
-+       w0 = (unsigned long)(x & 0x00000000ffffffff); \
-+       w1 = (unsigned long)(x & 0xffffffff00000000) >> 32; \
-+     } while (0)
-+#else /* CONFIG_COLDFIRE */
- #define umul_ppmm(w1, w0, u, v) \
-   __asm__ ("mulu%.l %3,%1:%0"						\
-            : "=d" ((USItype)(w0)),					\
-              "=d" ((USItype)(w1))					\
-            : "%0" ((USItype)(u)),					\
-              "dmi" ((USItype)(v)))
-+#endif /* CONFIG_COLDFIRE */
- 
- #define __umulsidi3(u, v) \
-   ({DIunion __w;							\
---- a/arch/m68k/lib/semaphore.S
-+++ b/arch/m68k/lib/semaphore.S
-@@ -16,11 +16,24 @@
-  * there is contention on the semaphore.
-  */
- ENTRY(__down_failed)
-+#ifndef CONFIG_COLDFIRE
- 	moveml %a0/%d0/%d1,-(%sp)
-+#else
-+	movel %a0,-(%sp)
-+	movel %d0,-(%sp)
-+	movel %d1,-(%sp)
-+#endif
- 	movel %a1,-(%sp)
- 	jbsr __down
- 	movel (%sp)+,%a1
-+#ifndef CONFIG_COLDFIRE
- 	moveml (%sp)+,%a0/%d0/%d1
-+#else
-+	movel (%sp)+,%d1
-+	movel (%sp)+,%d0
-+	movel (%sp)+,%a0
-+#endif
-+
- 	rts
- 
- ENTRY(__down_failed_interruptible)
-@@ -44,10 +57,22 @@ ENTRY(__down_failed_trylock)
- 	rts
- 
- ENTRY(__up_wakeup)
-+#ifndef CONFIG_COLDFIRE
- 	moveml %a0/%d0/%d1,-(%sp)
-+#else
-+	movel %a0,-(%sp)
-+	movel %d0,-(%sp)
-+	movel %d1,-(%sp)
-+#endif
- 	movel %a1,-(%sp)
- 	jbsr __up
- 	movel (%sp)+,%a1
-+#ifndef CONFIG_COLDFIRE
- 	moveml (%sp)+,%a0/%d0/%d1
-+#else
-+	movel (%sp)+,%d1
-+	movel (%sp)+,%d0
-+	movel (%sp)+,%a0
-+#endif
- 	rts
- 
---- a/arch/m68k/lib/string.c
-+++ b/arch/m68k/lib/string.c
-@@ -15,6 +15,7 @@ char *strcpy(char *dest, const char *src
- }
- EXPORT_SYMBOL(strcpy);
- 
-+#ifndef CONFIG_COLDFIRE
- void *memset(void *s, int c, size_t count)
- {
- 	void *xs = s;
-@@ -143,6 +144,69 @@ void *memcpy(void *to, const void *from,
- }
- EXPORT_SYMBOL(memcpy);
- 
-+#else /* CONFIG_COLDFIRE */
-+
-+void *memset(void *s, int c, size_t count)
-+{
-+  unsigned long x;
-+  void *originalTo;
-+
-+  for (x = 0; x < count; x++)
-+    *(unsigned char *)s++ = (unsigned char)c;
-+
-+  return originalTo;
-+}
-+EXPORT_SYMBOL(memset);
-+
-+void *memcpy(void *to, const void *from, size_t n)
-+{
-+  void *xto = to;
-+  size_t temp;
-+
-+  if (!n)
-+    return xto;
-+  if ((long) to & 1) {
-+      char *cto = to;
-+      const char *cfrom = from;
-+      *cto++ = *cfrom++;
-+      to = cto;
-+      from = cfrom;
-+      n--;
-+    }
-+  if (n > 2 && (long) to & 2) {
-+      short *sto = to;
-+      const short *sfrom = from;
-+      *sto++ = *sfrom++;
-+      to = sto;
-+      from = sfrom;
-+      n -= 2;
-+    }
-+  temp = n >> 2;
-+  if (temp) {
-+      long *lto = to;
-+      const long *lfrom = from;
-+      for (; temp; temp--)
-+	*lto++ = *lfrom++;
-+      to = lto;
-+      from = lfrom;
-+    }
-+  if (n & 2) {
-+      short *sto = to;
-+      const short *sfrom = from;
-+      *sto++ = *sfrom++;
-+      to = sto;
-+      from = sfrom;
-+    }
-+  if (n & 1) {
-+      char *cto = to;
-+      const char *cfrom = from;
-+      *cto = *cfrom;
-+    }
-+  return xto;
-+}
-+EXPORT_SYMBOL(memcpy);
-+#endif /* CONFIG_COLDFIRE */
-+
- void *memmove(void *dest, const void *src, size_t n)
- {
- 	void *xdest = dest;
---- a/arch/m68k/lib/uaccess.c
-+++ b/arch/m68k/lib/uaccess.c
-@@ -5,6 +5,7 @@
-  */
- 
- #include <linux/module.h>
-+#ifndef CONFIG_COLDFIRE
- #include <asm/uaccess.h>
- 
- unsigned long __generic_copy_from_user(void *to, const void __user *from,
-@@ -220,3 +221,244 @@ unsigned long __clear_user(void __user *
-     return res;
- }
- EXPORT_SYMBOL(__clear_user);
-+
-+#else /* CONFIG_COLDFIRE */
-+
-+#include <asm/cf_uaccess.h>
-+
-+unsigned long __generic_copy_from_user(void *to, const void *from,
-+		unsigned long n)
-+{
-+    unsigned long tmp;
-+    __asm__ __volatile__
-+	("   tstl %2\n"
-+	 "   jeq 2f\n"
-+	 "1: movel (%1)+,%3\n"
-+	 "   movel %3,(%0)+\n"
-+	 "   subql #1,%2\n"
-+	 "   jne 1b\n"
-+	 "2: movel %4,%2\n"
-+	 "   bclr #1,%2\n"
-+	 "   jeq 4f\n"
-+	 "3: movew (%1)+,%3\n"
-+	 "   movew %3,(%0)+\n"
-+	 "4: bclr #0,%2\n"
-+	 "   jeq 6f\n"
-+	 "5: moveb (%1)+,%3\n"
-+	 "   moveb %3,(%0)+\n"
-+	 "6:\n"
-+	 ".section .fixup,\"ax\"\n"
-+	 "   .even\n"
-+	 "7: movel %2,%%d0\n"
-+	 "71:clrl (%0)+\n"
-+	 "   subql #1,%%d0\n"
-+	 "   jne 71b\n"
-+	 "   lsll #2,%2\n"
-+	 "   addl %4,%2\n"
-+	 "   btst #1,%4\n"
-+	 "   jne 81f\n"
-+	 "   btst #0,%4\n"
-+	 "   jne 91f\n"
-+	 "   jra 6b\n"
-+	 "8: addql #2,%2\n"
-+	 "81:clrw (%0)+\n"
-+	 "   btst #0,%4\n"
-+	 "   jne 91f\n"
-+	 "   jra 6b\n"
-+	 "9: addql #1,%2\n"
-+	 "91:clrb (%0)+\n"
-+	 "   jra 6b\n"
-+	 ".previous\n"
-+	 ".section __ex_table,\"a\"\n"
-+	 "   .align 4\n"
-+	 "   .long 1b,7b\n"
-+	 "   .long 3b,8b\n"
-+	 "   .long 5b,9b\n"
-+	 ".previous"
-+	 : "=a"(to), "=a"(from), "=d"(n), "=&d"(tmp)
-+	 : "d"(n & 3), "0"(to), "1"(from), "2"(n/4)
-+	 : "d0", "memory");
-+    return n;
-+}
-+EXPORT_SYMBOL(__generic_copy_from_user);
-+
-+
-+unsigned long __generic_copy_to_user(void *to, const void *from,
-+		unsigned long n)
-+{
-+    unsigned long tmp;
-+    __asm__ __volatile__
-+	("   tstl %2\n"
-+	 "   jeq 3f\n"
-+	 "1: movel (%1)+,%3\n"
-+	 "22:movel %3,(%0)+\n"
-+	 "2: subql #1,%2\n"
-+	 "   jne 1b\n"
-+	 "3: movel %4,%2\n"
-+	 "   bclr #1,%2\n"
-+	 "   jeq 4f\n"
-+	 "   movew (%1)+,%3\n"
-+	 "24:movew %3,(%0)+\n"
-+	 "4: bclr #0,%2\n"
-+	 "   jeq 5f\n"
-+	 "   moveb (%1)+,%3\n"
-+	 "25:moveb %3,(%0)+\n"
-+	 "5:\n"
-+	 ".section .fixup,\"ax\"\n"
-+	 "   .even\n"
-+	 "60:addql #1,%2\n"
-+	 "6: lsll #2,%2\n"
-+	 "   addl %4,%2\n"
-+	 "   jra 5b\n"
-+	 "7: addql #2,%2\n"
-+	 "   jra 5b\n"
-+	 "8: addql #1,%2\n"
-+	 "   jra 5b\n"
-+	 ".previous\n"
-+	 ".section __ex_table,\"a\"\n"
-+	 "   .align 4\n"
-+	 "   .long 1b,60b\n"
-+	 "   .long 22b,6b\n"
-+	 "   .long 2b,6b\n"
-+	 "   .long 24b,7b\n"
-+	 "   .long 3b,60b\n"
-+	 "   .long 4b,7b\n"
-+	 "   .long 25b,8b\n"
-+	 "   .long 5b,8b\n"
-+	 ".previous"
-+	 : "=a"(to), "=a"(from), "=d"(n), "=&d"(tmp)
-+	 : "r"(n & 3), "0"(to), "1"(from), "2"(n / 4)
-+	 : "memory");
-+    return n;
-+}
-+EXPORT_SYMBOL(__generic_copy_to_user);
-+
-+/*
-+ * Copy a null terminated string from userspace.
-+ */
-+
-+long strncpy_from_user(char *dst, const char *src, long count)
-+{
-+	long res = -EFAULT;
-+	if (!(access_ok(VERIFY_READ, src, 1))) /* --tym-- */
-+		return res;
-+    if (count == 0) return count;
-+    __asm__ __volatile__
-+	("1: moveb (%2)+,%%d0\n"
-+	 "12:moveb %%d0,(%1)+\n"
-+	 "   jeq 2f\n"
-+	 "   subql #1,%3\n"
-+	 "   jne 1b\n"
-+	 "2: subl %3,%0\n"
-+	 "3:\n"
-+	 ".section .fixup,\"ax\"\n"
-+	 "   .even\n"
-+	 "4: movel %4,%0\n"
-+	 "   jra 3b\n"
-+	 ".previous\n"
-+	 ".section __ex_table,\"a\"\n"
-+	 "   .align 4\n"
-+	 "   .long 1b,4b\n"
-+	 "   .long 12b,4b\n"
-+	 ".previous"
-+	 : "=d"(res), "=a"(dst), "=a"(src), "=d"(count)
-+	 : "i"(-EFAULT), "0"(count), "1"(dst), "2"(src), "3"(count)
-+	 : "d0", "memory");
-+    return res;
-+}
-+EXPORT_SYMBOL(strncpy_from_user);
-+
-+/*
-+ * Return the size of a string (including the ending 0)
-+ *
-+ * Return 0 on exception, a value greater than N if too long
-+ */
-+long strnlen_user(const char *src, long n)
-+{
-+    long res = -EFAULT;
-+    if (!(access_ok(VERIFY_READ, src, 1))) /* --tym-- */
-+	return res;
-+
-+	res = -(long)src;
-+	__asm__ __volatile__
-+		("1:\n"
-+		 "   tstl %2\n"
-+		 "   jeq 3f\n"
-+		 "2: moveb (%1)+,%%d0\n"
-+		 "22:\n"
-+		 "   subql #1,%2\n"
-+		 "   tstb %%d0\n"
-+		 "   jne 1b\n"
-+		 "   jra 4f\n"
-+		 "3:\n"
-+		 "   addql #1,%0\n"
-+		 "4:\n"
-+		 "   addl %1,%0\n"
-+		 "5:\n"
-+		 ".section .fixup,\"ax\"\n"
-+		 "   .even\n"
-+		 "6: moveq %3,%0\n"
-+		 "   jra 5b\n"
-+		 ".previous\n"
-+		 ".section __ex_table,\"a\"\n"
-+		 "   .align 4\n"
-+		 "   .long 2b,6b\n"
-+		 "   .long 22b,6b\n"
-+		 ".previous"
-+		 : "=d"(res), "=a"(src), "=d"(n)
-+		 : "i"(0), "0"(res), "1"(src), "2"(n)
-+		 : "d0");
-+	return res;
-+}
-+EXPORT_SYMBOL(strnlen_user);
-+
-+
-+/*
-+ * Zero Userspace
-+ */
-+
-+unsigned long __clear_user(void *to, unsigned long n)
-+{
-+    __asm__ __volatile__
-+	("   tstl %1\n"
-+	 "   jeq 3f\n"
-+	 "1: movel %3,(%0)+\n"
-+	 "2: subql #1,%1\n"
-+	 "   jne 1b\n"
-+	 "3: movel %2,%1\n"
-+	 "   bclr #1,%1\n"
-+	 "   jeq 4f\n"
-+	 "24:movew %3,(%0)+\n"
-+	 "4: bclr #0,%1\n"
-+	 "   jeq 5f\n"
-+	 "25:moveb %3,(%0)+\n"
-+	 "5:\n"
-+	 ".section .fixup,\"ax\"\n"
-+	 "   .even\n"
-+	 "61:addql #1,%1\n"
-+	 "6: lsll #2,%1\n"
-+	 "   addl %2,%1\n"
-+	 "   jra 5b\n"
-+	 "7: addql #2,%1\n"
-+	 "   jra 5b\n"
-+	 "8: addql #1,%1\n"
-+	 "   jra 5b\n"
-+	 ".previous\n"
-+	 ".section __ex_table,\"a\"\n"
-+	 "   .align 4\n"
-+	 "   .long 1b,61b\n"
-+	 "   .long 2b,6b\n"
-+	 "   .long 3b,61b\n"
-+	 "   .long 24b,7b\n"
-+	 "   .long 4b,7b\n"
-+	 "   .long 25b,8b\n"
-+	 "   .long 5b,8b\n"
-+	 ".previous"
-+	 : "=a"(to), "=d"(n)
-+	 : "r"(n & 3), "d"(0), "0"(to), "1"(n/4));
-+    return n;
-+}
-+EXPORT_SYMBOL(__clear_user);
-+
-+#endif /* CONFIG_COLDFIRE */
-+
---- a/arch/m68k/Makefile
-+++ b/arch/m68k/Makefile
-@@ -16,7 +16,9 @@
- KBUILD_DEFCONFIG := amiga_defconfig
- 
- # override top level makefile
-+ifndef CONFIG_COLDFIRE
- AS += -m68020
-+endif
- LDFLAGS := -m m68kelf
- LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
- ifneq ($(SUBARCH),$(ARCH))
-@@ -30,12 +32,18 @@ ifdef CONFIG_SUN3
- LDFLAGS_vmlinux = -N
- endif
- 
-+ifdef CONFIG_COLDFIRE
-+# OBJCOPYFLAGS    := -R .note -R .note.gnu.build-id -R .comment -S
-+# LDFLAGS_vmlinux = --verbose
-+endif
-+
- CHECKFLAGS += -D__mc68000__
- 
- # without -fno-strength-reduce the 53c7xx.c driver fails ;-(
- KBUILD_CFLAGS += -pipe -fno-strength-reduce -ffixed-a2
- 
- # enable processor switch if compiled only for a single cpu
-+ifndef CONFIG_COLDFIRE
- ifndef CONFIG_M68020
- ifndef CONFIG_M68030
- 
-@@ -49,6 +57,16 @@ endif
- 
- endif
- endif
-+endif
-+
-+ifdef CONFIG_M5445X
-+KBUILD_CFLAGS += -march=isac -mcpu=54455 -msoft-float -g
-+KBUILD_AFLAGS += -march=isac -mcpu=54455 -msoft-float  
-+endif
-+ifdef CONFIG_M547X_8X
-+KBUILD_CFLAGS += -mcfv4e -g
-+KBUILD_AFLAGS += -mcfv4e
-+endif
- 
- ifdef CONFIG_KGDB
- # If configured for kgdb support, include debugging infos and keep the
-@@ -57,8 +75,12 @@ KBUILD_CFLAGS := $(subst -fomit-frame-po
- endif
- 
- ifndef CONFIG_SUN3
-+ifndef CONFIG_COLDFIRE
- head-y := arch/m68k/kernel/head.o
- else
-+head-y := arch/m68k/coldfire/head.o
-+endif
-+else
- head-y := arch/m68k/kernel/sun3-head.o
- endif
- 
-@@ -79,6 +101,7 @@ core-$(CONFIG_SUN3)		+= arch/m68k/sun3/	
- core-$(CONFIG_M68040)		+= arch/m68k/fpsp040/
- core-$(CONFIG_M68060)		+= arch/m68k/ifpsp060/
- core-$(CONFIG_M68KFPU_EMU)	+= arch/m68k/math-emu/
-+core-$(CONFIG_COLDFIRE)		+= arch/m68k/coldfire/
- 
- all:	zImage
- 
---- a/arch/m68k/mm/cache.c
-+++ b/arch/m68k/mm/cache.c
-@@ -10,7 +10,11 @@
- #include <asm/pgalloc.h>
- #include <asm/traps.h>
- 
-+#ifdef CONFIG_COLDFIRE
-+#include <asm/cfcache.h>
-+#endif /* CONFIG_COLDFIRE */
- 
-+#ifndef CONFIG_COLDFIRE
- static unsigned long virt_to_phys_slow(unsigned long vaddr)
- {
- 	if (CPU_IS_060) {
-@@ -69,11 +73,18 @@ static unsigned long virt_to_phys_slow(u
- 	}
- 	return 0;
- }
-+#endif /* CONFIG_COLDFIRE */
-+
- 
- /* Push n pages at kernel virtual address and clear the icache */
- /* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
- void flush_icache_range(unsigned long address, unsigned long endaddr)
- {
-+#ifdef CONFIG_COLDFIRE
-+// JKM -- hack until new cpushl stuff is in
-+//	cf_icache_flush_range(address, endaddr);
-+	flush_icache();
-+#else /* !CONFIG_COLDFIRE */
- 
- 	if (CPU_IS_040_OR_060) {
- 		address &= PAGE_MASK;
-@@ -94,9 +105,11 @@ void flush_icache_range(unsigned long ad
- 			      : "=&d" (tmp)
- 			      : "di" (FLUSH_I));
- 	}
-+#endif /* CONFIG_COLDFIRE */
- }
- EXPORT_SYMBOL(flush_icache_range);
- 
-+#ifndef CONFIG_COLDFIRE
- void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
- 			     unsigned long addr, int len)
- {
-@@ -115,4 +128,5 @@ void flush_icache_user_range(struct vm_a
- 			      : "di" (FLUSH_I));
- 	}
- }
-+#endif /* CONFIG_COLDFIRE */
- 
---- /dev/null
-+++ b/arch/m68k/mm/cf-mmu.c
-@@ -0,0 +1,260 @@
-+/*
-+ * linux/arch/m68k/mm/cf-mmu.c
-+ *
-+ * Based upon linux/arch/m68k/mm/sun3mmu.c
-+ * Based upon linux/arch/ppc/mm/mmu_context.c
-+ *
-+ * Implementations of mm routines specific to the Coldfire MMU.
-+ *
-+ * Copyright (c) 2008 Freescale Semiconductor, Inc.
-+ */
-+
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/mm.h>
-+#include <linux/swap.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#ifdef CONFIG_BLK_DEV_RAM
-+#include <linux/blkdev.h>
-+#endif
-+#include <linux/bootmem.h>
-+
-+#include <asm/setup.h>
-+#include <asm/uaccess.h>
-+#include <asm/page.h>
-+#include <asm/pgtable.h>
-+#include <asm/system.h>
-+#include <asm/machdep.h>
-+#include <asm/io.h>
-+#include <asm/mmu_context.h>
-+#include <asm/cf_pgalloc.h>
-+
-+#include <asm/coldfire.h>
-+#include <asm/tlbflush.h>
-+
-+#define KMAPAREA(x)	((x >= VMALLOC_START) && ( x < KMAP_END))
-+
-+#undef DEBUG
-+
-+mm_context_t next_mmu_context;
-+unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
-+
-+atomic_t nr_free_contexts;
-+struct mm_struct *context_mm[LAST_CONTEXT+1];
-+void steal_context(void);
-+
-+
-+const char bad_pmd_string[] = "Bad pmd in pte_alloc: %08lx\n";
-+
-+extern unsigned long empty_bad_page_table;
-+extern unsigned long empty_bad_page;
-+extern unsigned long num_pages;
-+
-+extern char __init_begin, __init_end;
-+
-+void free_initmem(void)
-+{
-+#if 0
-+	unsigned long addr;
-+	unsigned long start = (unsigned long)&__init_begin;
-+	unsigned long end = (unsigned long)&__init_end;
-+
-+	printk(KERN_INFO "free_initmem: __init_begin = 0x%lx  __init_end = 0x%lx\n", start, end);
-+
-+	addr = (unsigned long)&__init_begin;
-+	for (; addr < (unsigned long)&__init_end; addr += PAGE_SIZE) {
-+		/* not currently used */
-+		virt_to_page(addr)->flags &= ~(1 << PG_reserved);
-+		init_page_count(virt_to_page(addr));
-+		free_page(addr);
-+		totalram_pages++;
-+	}
-+#endif
-+}
-+
-+/* Coldfire paging_init derived from sun3 */
-+void __init paging_init(void)
-+{
-+	pgd_t * pg_dir;
-+	pte_t * pg_table;
-+	int i;
-+	unsigned long address;
-+	unsigned long next_pgtable;
-+	unsigned long bootmem_end;
-+	unsigned long zones_size[MAX_NR_ZONES];
-+	unsigned long size;
-+	enum zone_type zone;
-+
-+	empty_zero_page = (void *)alloc_bootmem_pages(PAGE_SIZE);
-+	memset((void *)empty_zero_page, 0, PAGE_SIZE);
-+
-+	pg_dir = swapper_pg_dir;
-+	memset(swapper_pg_dir, 0, sizeof (swapper_pg_dir));
-+
-+	size = num_pages * sizeof(pte_t);  
-+	size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1);
-+	next_pgtable = (unsigned long)alloc_bootmem_pages(size);
-+
-+	bootmem_end = (next_pgtable + size + PAGE_SIZE) & PAGE_MASK; 
-+	pg_dir += PAGE_OFFSET >> PGDIR_SHIFT; 
-+
-+	address = PAGE_OFFSET;
-+	while (address < (unsigned long)high_memory) 
-+	{
-+    		pg_table = (pte_t *)next_pgtable; 
-+	    	next_pgtable += PTRS_PER_PTE * sizeof (pte_t);
-+		pgd_val(*pg_dir) = (unsigned long) pg_table;
-+		pg_dir++;
-+
-+		/* now change pg_table to kernel virtual addresses */
-+		for (i=0; i<PTRS_PER_PTE; ++i, ++pg_table)
-+		{
-+			pte_t pte = pfn_pte(virt_to_pfn(address), PAGE_INIT);
-+			if (address >= (unsigned long)high_memory)
-+				pte_val (pte) = 0;
-+
-+			set_pte (pg_table, pte);
-+			address += PAGE_SIZE;
-+		}
-+	}
-+	
-+	current->mm = NULL;
-+
-+	/* clear zones */
-+	for (zone = 0; zone < MAX_NR_ZONES; zone++)
-+		zones_size[zone] = 0x0;
-+
-+	/* allocate the bottom 32M (0x40x 0x41x) to DMA - head.S marks them NO CACHE */
-+	/* JKM - this should be changed to allocate from the TOP (0x4f,0x4e) but the
-+	 * allocator is being a bit challenging */
-+        zones_size[ZONE_DMA] = (32*1024*1024) >> PAGE_SHIFT;
-+
-+	/* allocate the rest to NORMAL - head.S marks them CACHE */
-+	zones_size[ZONE_NORMAL] = (((unsigned long)high_memory - PAGE_OFFSET) >> PAGE_SHIFT) - zones_size[0];
-+
-+	free_area_init(zones_size);
-+}
-+
-+
-+int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
-+{
-+        struct mm_struct *mm;
-+        pgd_t *pgd;
-+        pmd_t *pmd;
-+        pte_t *pte;
-+        unsigned long mmuar;
-+        int asid;
-+	int flags;
-+
-+	local_save_flags(flags);
-+	local_irq_disable();
-+
-+	mmuar = ( dtlb ) ? regs->mmuar
-+			 : regs->pc + (extension_word * sizeof(long));
-+
-+        mm = (!user_mode(regs) && KMAPAREA(mmuar)) ? &init_mm : current->mm;
-+
-+        if (!mm) {
-+	    local_irq_restore(flags);
-+	    return (-1);
-+	}
-+
-+        pgd = pgd_offset(mm, mmuar);
-+        if (pgd_none(*pgd))  {
-+	    local_irq_restore(flags);
-+	    return (-1);
-+	}
-+	    
-+    	pmd = pmd_offset(pgd, mmuar);
-+    	if (pmd_none(*pmd)) {
-+	    local_irq_restore(flags);
-+	    return (-1);
-+	}	
-+    
-+	pte = (KMAPAREA(mmuar)) ? pte_offset_kernel(pmd, mmuar)
-+	                       : pte_offset_map(pmd, mmuar);
-+    	if (pte_none(*pte) || !pte_present(*pte)) {
-+	    local_irq_restore(flags);
-+	    return (-1);		
-+	}
-+
-+	if (write) {
-+            if (!pte_write(*pte)) {
-+		local_irq_restore(flags);
-+	    	return (-1);
-+	    }
-+    	    set_pte(pte, pte_mkdirty(*pte));
-+	}
-+	
-+        set_pte(pte, pte_mkyoung(*pte));
-+        asid = mm->context & 0xff;
-+        if (!pte_dirty(*pte) && !KMAPAREA(mmuar))
-+    	    set_pte(pte, pte_wrprotect(*pte));
-+
-+        *MMUTR = (mmuar & PAGE_MASK) | (asid << CF_ASID_MMU_SHIFT)
-+               | (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK ) >> CF_PAGE_MMUTR_SHIFT)
-+               | MMUTR_V;
-+
-+        *MMUDR = (pte_val(*pte) & PAGE_MASK) 
-+	       | ((pte->pte) & CF_PAGE_MMUDR_MASK)
-+               | MMUDR_SZ8K | MMUDR_X;
-+	    
-+	if ( dtlb )
-+    	    *MMUOR = MMUOR_ACC | MMUOR_UAA;
-+	else
-+	    *MMUOR = MMUOR_ITLB | MMUOR_ACC | MMUOR_UAA;
-+
-+	asm("nop");
-+
-+#ifdef DEBUG
-+	printk("cf_tlb_miss: va=%lx, pa=%lx\n", (mmuar & PAGE_MASK), 
-+		  (pte_val(*pte)  & PAGE_MASK));
-+#endif
-+	local_irq_restore(flags);
-+        return (0);
-+}
-+
-+
-+/* The following was taken from arch/ppc/mmu_context.c
-+ *
-+ * Initialize the context management stuff.
-+ */
-+void __init mmu_context_init(void)
-+{
-+	/*
-+	 * Some processors have too few contexts to reserve one for
-+	 * init_mm, and require using context 0 for a normal task.
-+	 * Other processors reserve the use of context zero for the kernel.
-+	 * This code assumes FIRST_CONTEXT < 32.
-+	 */
-+	context_map[0] = (1 << FIRST_CONTEXT) - 1;
-+	next_mmu_context = FIRST_CONTEXT;
-+	atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
-+}
-+
-+/*
-+ * Steal a context from a task that has one at the moment.
-+ * This is only used on 8xx and 4xx and we presently assume that
-+ * they don't do SMP.  If they do then thicfpgalloc.hs will have to check
-+ * whether the MM we steal is in use.
-+ * We also assume that this is only used on systems that don't
-+ * use an MMU hash table - this is true for 8xx and 4xx.
-+ * This isn't an LRU system, it just frees up each context in
-+ * turn (sort-of pseudo-random replacement :).  This would be the
-+ * place to implement an LRU scheme if anyone was motivated to do it.
-+ *  -- paulus
-+ */
-+void steal_context(void)
-+{
-+	struct mm_struct *mm;
-+	/* free up context `next_mmu_context' */
-+	/* if we shouldn't free context 0, don't... */
-+	if (next_mmu_context < FIRST_CONTEXT)
-+		next_mmu_context = FIRST_CONTEXT;
-+	mm = context_mm[next_mmu_context];
-+	flush_tlb_mm(mm);
-+	destroy_context(mm);
-+}
---- /dev/null
-+++ b/arch/m68k/mm/cf-mmu.c.orig
-@@ -0,0 +1,265 @@
-+/*
-+ * linux/arch/m68k/mm/cf-mmu.c
-+ *
-+ * Based upon linux/arch/m68k/mm/sun3mmu.c
-+ * Based upon linux/arch/ppc/mm/mmu_context.c
-+ *
-+ * Implementations of mm routines specific to the Coldfire MMU.
-+ *
-+ * Copyright (c) 2008 Freescale Semiconductor, Inc.
-+ */
-+
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/mm.h>
-+#include <linux/swap.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#ifdef CONFIG_BLK_DEV_RAM
-+#include <linux/blkdev.h>
-+#endif
-+#include <linux/bootmem.h>
-+
-+#include <asm/setup.h>
-+#include <asm/uaccess.h>
-+#include <asm/page.h>
-+#include <asm/pgtable.h>
-+#include <asm/system.h>
-+#include <asm/machdep.h>
-+#include <asm/io.h>
-+#include <asm/mmu_context.h>
-+#include <asm/cf_pgalloc.h>
-+
-+#include <asm/coldfire.h>
-+#include <asm/tlbflush.h>
-+
-+#if PAGE_OFFSET == CONFIG_SDRAM_BASE
-+#define	KERNRAM(x) ((x >= PAGE_OFFSET) && (x < (PAGE_OFFSET + CONFIG_SDRAM_SIZE)))
-+#else
-+#define	KERNRAM(x) (x >= PAGE_OFFSET)
-+#endif
-+
-+mm_context_t next_mmu_context;
-+unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
-+
-+atomic_t nr_free_contexts;
-+struct mm_struct *context_mm[LAST_CONTEXT+1];
-+void steal_context(void);
-+
-+
-+const char bad_pmd_string[] = "Bad pmd in pte_alloc: %08lx\n";
-+
-+extern unsigned long empty_bad_page_table;
-+extern unsigned long empty_bad_page;
-+extern unsigned long num_pages;
-+
-+extern char __init_begin, __init_end;
-+
-+void free_initmem(void)
-+{
-+#if 0
-+	unsigned long addr;
-+	unsigned long start = (unsigned long)&__init_begin;
-+	unsigned long end = (unsigned long)&__init_end;
-+
-+/* 
-+ * JKM -- revisit -- the latest round of vmlinux.lds changes has caused
-+ * a little grief with how init areas are handled.  With the new toolchain
-+ * release I'll fix this.
-+ */
-+	printk(KERN_INFO "free_initmem: __init_begin = 0x%lx  __init_end = 0x%lx\n", start, end);
-+
-+	addr = (unsigned long)&__init_begin;
-+	for (; addr < (unsigned long)&__init_end; addr += PAGE_SIZE) {
-+		/* not currently used */
-+		virt_to_page(addr)->flags &= ~(1 << PG_reserved);
-+		init_page_count(virt_to_page(addr));
-+		free_page(addr);
-+		totalram_pages++;
-+	}
-+#endif
-+}
-+
-+/* Coldfire paging_init derived from sun3 */
-+void __init paging_init(void)
-+{
-+	pgd_t * pg_dir;
-+	pte_t * pg_table;
-+	int i;
-+	unsigned long address;
-+	unsigned long next_pgtable;
-+	unsigned long bootmem_end;
-+	unsigned long zones_size[MAX_NR_ZONES];
-+	unsigned long size;
-+	enum zone_type zone;
-+
-+	empty_zero_page = (void *)alloc_bootmem_pages(PAGE_SIZE);
-+	memset((void *)empty_zero_page, 0, PAGE_SIZE);
-+
-+	pg_dir = swapper_pg_dir;
-+	memset(swapper_pg_dir, 0, sizeof (swapper_pg_dir));
-+
-+	size = num_pages * sizeof(pte_t);  
-+	size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1);
-+	next_pgtable = (unsigned long)alloc_bootmem_pages(size);
-+
-+	bootmem_end = (next_pgtable + size + PAGE_SIZE) & PAGE_MASK; 
-+	pg_dir += PAGE_OFFSET >> PGDIR_SHIFT; 
-+
-+	address = PAGE_OFFSET;
-+	while (address < (unsigned long)high_memory) 
-+	{
-+    		pg_table = (pte_t *)next_pgtable; 
-+	    	next_pgtable += PTRS_PER_PTE * sizeof (pte_t);
-+		pgd_val(*pg_dir) = (unsigned long) pg_table;
-+		pg_dir++;
-+
-+		/* now change pg_table to kernel virtual addresses */
-+		for (i=0; i<PTRS_PER_PTE; ++i, ++pg_table)
-+		{
-+			pte_t pte = pfn_pte(virt_to_pfn(address), PAGE_INIT);
-+			if (address >= (unsigned long)high_memory)
-+				pte_val (pte) = 0;
-+
-+			set_pte (pg_table, pte);
-+			address += PAGE_SIZE;
-+		}
-+	}
-+	
-+	current->mm = NULL;
-+
-+	/* clear zones */
-+	for (zone = 0; zone < MAX_NR_ZONES; zone++)
-+		zones_size[zone] = 0x0;
-+
-+	/* allocate the bottom 32M (0x40x 0x41x) to DMA - head.S marks them NO CACHE */
-+	/* JKM - this should be changed to allocate from the TOP (0x4f,0x4e) but the
-+	 * allocator is being a bit challenging */
-+        zones_size[ZONE_DMA] = (32*1024*1024) >> PAGE_SHIFT;
-+
-+	/* allocate the rest to NORMAL - head.S marks them CACHE */
-+	zones_size[ZONE_NORMAL] = (((unsigned long)high_memory - PAGE_OFFSET) >> PAGE_SHIFT) - zones_size[0];
-+
-+	free_area_init(zones_size);
-+}
-+
-+
-+int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
-+{
-+        struct mm_struct *mm;
-+        pgd_t *pgd;
-+        pmd_t *pmd;
-+        pte_t *pte;
-+        unsigned long mmuar;
-+        int asid;
-+	int flags;
-+
-+	local_save_flags(flags);
-+	local_irq_disable();
-+
-+	mmuar = ( dtlb ) ? regs->mmuar
-+			 : regs->pc + (extension_word * sizeof(long));
-+
-+        mm = (!user_mode(regs) && KERNRAM(mmuar)) ? &init_mm : current->mm;
-+
-+        if (!mm) {
-+	    local_irq_restore(flags);
-+	    return (-1);
-+	}
-+
-+        pgd = pgd_offset(mm, mmuar);
-+        if (pgd_none(*pgd))  {
-+	    local_irq_restore(flags);
-+	    return (-1);
-+	}
-+	    
-+    	pmd = pmd_offset(pgd, mmuar);
-+    	if (pmd_none(*pmd)) {
-+	    local_irq_restore(flags);
-+	    return (-1);
-+	}	
-+    
-+	pte = (KERNRAM(mmuar)) ? pte_offset_kernel(pmd, mmuar)
-+	                       : pte_offset_map(pmd, mmuar);
-+    	if (pte_none(*pte) || !pte_present(*pte)) {
-+	    local_irq_restore(flags);
-+	    return (-1);		
-+	}
-+
-+	if (write) {
-+            if (!pte_write(*pte)) {
-+		local_irq_restore(flags);
-+	    	return (-1);
-+	    }
-+    	    set_pte(pte, pte_mkdirty(*pte));
-+	}
-+	
-+        set_pte(pte, pte_mkyoung(*pte));
-+        asid = mm->context & 0xff;
-+        if (!pte_dirty(*pte) && !KERNRAM(mmuar))
-+    	    set_pte(pte, pte_wrprotect(*pte));
-+
-+        *MMUTR = (mmuar & PAGE_MASK) | (asid << CF_ASID_MMU_SHIFT)
-+               | (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK ) >> CF_PAGE_MMUTR_SHIFT)
-+               | MMUTR_V;
-+
-+        *MMUDR = (pte_val(*pte) & PAGE_MASK) 
-+	       | ((pte->pte) & CF_PAGE_MMUDR_MASK)
-+               | MMUDR_SZ8K | MMUDR_X;
-+	    
-+	if ( dtlb )
-+    	    *MMUOR = MMUOR_ACC | MMUOR_UAA;
-+	else
-+	    *MMUOR = MMUOR_ITLB | MMUOR_ACC | MMUOR_UAA;
-+
-+	asm("nop");
-+
-+	/*printk("cf_tlb_miss: va=%lx, pa=%lx\n", (mmuar & PAGE_MASK), 
-+		  (pte_val(*pte)  & PAGE_MASK));*/
-+	local_irq_restore(flags);
-+        return (0);
-+}
-+
-+
-+/* The following was taken from arch/ppc/mmu_context.c
-+ *
-+ * Initialize the context management stuff.
-+ */
-+void __init mmu_context_init(void)
-+{
-+	/*
-+	 * Some processors have too few contexts to reserve one for
-+	 * init_mm, and require using context 0 for a normal task.
-+	 * Other processors reserve the use of context zero for the kernel.
-+	 * This code assumes FIRST_CONTEXT < 32.
-+	 */
-+	context_map[0] = (1 << FIRST_CONTEXT) - 1;
-+	next_mmu_context = FIRST_CONTEXT;
-+	atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
-+}
-+
-+/*
-+ * Steal a context from a task that has one at the moment.
-+ * This is only used on 8xx and 4xx and we presently assume that
-+ * they don't do SMP.  If they do then thicfpgalloc.hs will have to check
-+ * whether the MM we steal is in use.
-+ * We also assume that this is only used on systems that don't
-+ * use an MMU hash table - this is true for 8xx and 4xx.
-+ * This isn't an LRU system, it just frees up each context in
-+ * turn (sort-of pseudo-random replacement :).  This would be the
-+ * place to implement an LRU scheme if anyone was motivated to do it.
-+ *  -- paulus
-+ */
-+void steal_context(void)
-+{
-+	struct mm_struct *mm;
-+	/* free up context `next_mmu_context' */
-+	/* if we shouldn't free context 0, don't... */
-+	if (next_mmu_context < FIRST_CONTEXT)
-+		next_mmu_context = FIRST_CONTEXT;
-+	mm = context_mm[next_mmu_context];
-+	flush_tlb_mm(mm);
-+	destroy_context(mm);
-+}
---- a/arch/m68k/mm/hwtest.c
-+++ b/arch/m68k/mm/hwtest.c
-@@ -25,6 +25,7 @@
- 
- #include <linux/module.h>
- 
-+#ifndef CONFIG_COLDFIRE
- int hwreg_present( volatile void *regp )
- {
-     int	ret = 0;
-@@ -82,4 +83,5 @@ int hwreg_write( volatile void *regp, un
- 	return( ret );
- }
- EXPORT_SYMBOL(hwreg_write);
-+#endif
- 
---- a/arch/m68k/mm/init.c
-+++ b/arch/m68k/mm/init.c
-@@ -122,7 +122,6 @@ void __init mem_init(void)
- 	if (MACH_IS_ATARI)
- 		atari_stram_mem_init_hook();
- #endif
--
- 	/* this will put all memory onto the freelists */
- 	totalram_pages = num_physpages = 0;
- 	for_each_online_pgdat(pgdat) {
-@@ -146,7 +145,7 @@ void __init mem_init(void)
- 		}
- 	}
- 
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
- 	/* insert pointer tables allocated so far into the tablelist */
- 	init_pointer_table((unsigned long)kernel_pg_dir);
- 	for (i = 0; i < PTRS_PER_PGD; i++) {
---- a/arch/m68k/mm/kmap.c
-+++ b/arch/m68k/mm/kmap.c
-@@ -24,7 +24,11 @@
- 
- #undef DEBUG
- 
-+#ifndef CONFIG_COLDFIRE
- #define PTRTREESIZE	(256*1024)
-+#else
-+#define PTRTREESIZE     PAGE_SIZE
-+#endif
- 
- /*
-  * For 040/060 we can use the virtual memory area like other architectures,
-@@ -50,7 +54,11 @@ static inline void free_io_area(void *ad
- 
- #else
- 
-+#ifdef CONFIG_COLDFIRE
-+#define IO_SIZE         PAGE_SIZE
-+#else
- #define IO_SIZE		(256*1024)
-+#endif
- 
- static struct vm_struct *iolist;
- 
-@@ -125,8 +133,34 @@ void __iomem *__ioremap(unsigned long ph
- 	}
- #endif
- 
-+#ifdef CONFIG_M5445X
-+	if (physaddr >= 0xf0000000) {
-+		/*
-+	 	 * On the M5445x processors an ACR is setup to map
-+		 * the 0xF0000000 range into kernel memory as
-+		 * non-cacheable.
-+		 */
-+		return (void __iomem *)physaddr;
-+	}
-+#endif
-+
-+#ifdef CONFIG_M547X_8X
-+	if (physaddr >= 0xf0000000) {
-+		/*
-+	 	 * On the M547x/M548x processors an ACR is setup to map
-+		 * the 0xF0000000 range into kernel memory as
-+		 * non-cacheable.
-+		 */
-+		return (void __iomem *)physaddr;
-+	}
-+        if ((physaddr >= 0xd0000000) && (physaddr + size < 0xd800ffff)) {
-+                printk("ioremap:PCI 0x%lx,0x%lx(%d) - PCI area hit\n", physaddr, size, cacheflag);
-+                return (void *)physaddr;
-+        }
-+#endif
-+
- #ifdef DEBUG
--	printk("ioremap: 0x%lx,0x%lx(%d) - ", physaddr, size, cacheflag);
-+	printk("ioremap: paddr=0x%lx,size=0x%lx(%d) - ", physaddr, size, cacheflag);
- #endif
- 	/*
- 	 * Mappings have to be aligned
-@@ -145,7 +179,7 @@ void __iomem *__ioremap(unsigned long ph
- 	virtaddr = (unsigned long)area->addr;
- 	retaddr = virtaddr + offset;
- #ifdef DEBUG
--	printk("0x%lx,0x%lx,0x%lx", physaddr, virtaddr, retaddr);
-+	printk(" paddr=0x%lx,vaddr=0x%lx,retaddr=0x%lx", physaddr, virtaddr, retaddr);
- #endif
- 
- 	/*
-@@ -170,7 +204,12 @@ void __iomem *__ioremap(unsigned long ph
- 			break;
- 		}
- 	} else {
-+#ifndef CONFIG_COLDFIRE
- 		physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY);
-+#else
-+		physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY | \
-+			     _PAGE_READWRITE);
-+#endif
- 		switch (cacheflag) {
- 		case IOMAP_NOCACHE_SER:
- 		case IOMAP_NOCACHE_NONSER:
-@@ -249,7 +288,12 @@ void __iounmap(void *addr, unsigned long
- 	pgd_t *pgd_dir;
- 	pmd_t *pmd_dir;
- 	pte_t *pte_dir;
--
-+#ifdef CONFIG_M547X_8X
-+        if ((addr >= (void*)0xd0000000) && (addr + size < (void*)0xd800ffff)) {
-+                printk("%s: PCI address\n",__FUNCTION__);
-+                return;
-+        }
-+#endif
- 	while ((long)size > 0) {
- 		pgd_dir = pgd_offset_k(virtaddr);
- 		if (pgd_bad(*pgd_dir)) {
---- a/arch/m68k/mm/Makefile
-+++ b/arch/m68k/mm/Makefile
-@@ -6,3 +6,4 @@ obj-y		:= cache.o init.o fault.o hwtest.
- 
- obj-$(CONFIG_MMU_MOTOROLA)	+= kmap.o memory.o motorola.o
- obj-$(CONFIG_MMU_SUN3)		+= sun3kmap.o sun3mmu.o
-+obj-$(CONFIG_MMU_CFV4E)		+= cf-mmu.o kmap.o memory.o
---- a/arch/m68k/mm/memory.c
-+++ b/arch/m68k/mm/memory.c
-@@ -127,6 +127,7 @@ int free_pointer_table (pmd_t *ptable)
- 	return 0;
- }
- 
-+#ifndef CONFIG_COLDFIRE
- /* invalidate page in both caches */
- static inline void clear040(unsigned long paddr)
- {
-@@ -173,6 +174,7 @@ static inline void pushcl040(unsigned lo
- 		clear040(paddr);
- 	local_irq_restore(flags);
- }
-+#endif /* CONFIG_COLDFIRE */
- 
- /*
-  * 040: Hit every page containing an address in the range paddr..paddr+len-1.
-@@ -203,6 +205,11 @@ static inline void pushcl040(unsigned lo
- 
- void cache_clear (unsigned long paddr, int len)
- {
-+#ifdef CONFIG_COLDFIRE
-+// JKM -- revise to use proper caching
-+//	cf_cache_clear(paddr, len);
-+	flush_bcache();
-+#else
-     if (CPU_IS_040_OR_060) {
- 	int tmp;
- 
-@@ -237,6 +244,7 @@ void cache_clear (unsigned long paddr, i
-     if(mach_l2_flush)
- 	mach_l2_flush(0);
- #endif
-+#endif /* CONFIG_COLDFIRE */
- }
- EXPORT_SYMBOL(cache_clear);
- 
-@@ -250,6 +258,11 @@ EXPORT_SYMBOL(cache_clear);
- 
- void cache_push (unsigned long paddr, int len)
- {
-+#ifdef CONFIG_COLDFIRE
-+// JKM -- revise to use proper caching
-+//	cf_cache_push(paddr, len);
-+	flush_bcache();
-+#else
-     if (CPU_IS_040_OR_060) {
- 	int tmp = PAGE_SIZE;
- 
-@@ -290,6 +303,7 @@ void cache_push (unsigned long paddr, in
-     if(mach_l2_flush)
- 	mach_l2_flush(1);
- #endif
-+#endif /* CONFIG_COLDFIRE */
- }
- EXPORT_SYMBOL(cache_push);
- 
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -6,7 +6,7 @@ menuconfig ATA
- 	tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"
- 	depends on HAS_IOMEM
- 	depends on BLOCK
--	depends on !(M32R || M68K) || BROKEN
-+	depends on !M32R || BROKEN
- 	depends on !SUN4 || BROKEN
- 	select SCSI
- 	---help---
-@@ -679,4 +679,13 @@ config PATA_BF54X
- 
- 	  If unsure, say N.
- 
-+config PATA_FSL
-+	tristate "Freescale on-chip PATA support"
-+	depends on (ARCH_MX3 || ARCH_MX27 || PPC_512x || M54455)
-+	help
-+	  On Freescale processors, say Y here if you wish to use the on-chip
-+	  ATA interface.
-+
-+	  If you are unsure, say N to this.
-+
- endif # ATA
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -1,4 +1,3 @@
--
- obj-$(CONFIG_ATA)		+= libata.o
- 
- obj-$(CONFIG_SATA_AHCI)		+= ahci.o
-@@ -71,6 +70,7 @@ obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
- obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
- obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
-+obj-$(CONFIG_PATA_FSL)		+= pata_fsl.o
- # Should be last but two libata driver
- obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
- # Should be last but one libata driver
---- /dev/null
-+++ b/drivers/ata/pata_fsl.c
-@@ -0,0 +1,814 @@
-+/*
-+ * Freescale integrated PATA driver
-+ */
-+
-+/*
-+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+
-+/*
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/blkdev.h>
-+#include <scsi/scsi_host.h>
-+#include <linux/ata.h>
-+#include <linux/libata.h>
-+#include <linux/platform_device.h>
-+#include <linux/fsl_devices.h>
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+#include <asm/dma.h>
-+#endif
-+
-+#define DRV_NAME "pata_fsl"
-+#define DRV_VERSION "1.0"
-+
-+#ifdef CONFIG_M54455
-+#define WRITE_ATA8(val, reg)			\
-+	__raw_writeb(val, (ata_regs + reg));
-+#define WRITE_ATA16(val, reg)			\
-+	__raw_writew(val, (ata_regs + reg));
-+#else
-+#define WRITE_ATA8(val, reg)			\
-+	__raw_writel(val, (ata_regs + reg));
-+#define WRITE_ATA16(val, reg)			\
-+	__raw_writel(val, (ata_regs + reg));
-+#endif
-+
-+struct pata_fsl_priv {
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+	int ultra;
-+#endif
-+	u8 *fsl_ata_regs;
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+	int dma_rchan;
-+	int dma_wchan;
-+	int dma_done;
-+	int dma_dir;
-+#endif
-+};
-+
-+enum {
-+	/* various constants */
-+
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+	FSL_ATA_MAX_SG_LEN      = 65534,
-+#endif
-+
-+	/* offsets to registers */
-+
-+	FSL_ATA_TIMING_REGS     = 0x00,
-+	FSL_ATA_FIFO_FILL       = 0x20,
-+	FSL_ATA_CONTROL         = 0x24,
-+	FSL_ATA_INT_PEND        = 0x28,
-+	FSL_ATA_INT_EN          = 0x2C,
-+	FSL_ATA_INT_CLEAR       = 0x30,
-+	FSL_ATA_FIFO_ALARM      = 0x34,
-+	FSL_ATA_DRIVE_DATA      = 0xA0,
-+	FSL_ATA_DRIVE_CONTROL   = 0xD8,
-+
-+	/* bits within FSL_ATA_CONTROL */
-+
-+	FSL_ATA_CTRL_FIFO_RST_B    = 0x80,
-+	FSL_ATA_CTRL_ATA_RST_B     = 0x40,
-+	FSL_ATA_CTRL_FIFO_TX_EN    = 0x20,
-+	FSL_ATA_CTRL_FIFO_RCV_EN   = 0x10,
-+	FSL_ATA_CTRL_DMA_PENDING   = 0x08,
-+	FSL_ATA_CTRL_DMA_ULTRA     = 0x04,
-+	FSL_ATA_CTRL_DMA_WRITE     = 0x02,
-+	FSL_ATA_CTRL_IORDY_EN      = 0x01,
-+
-+	/* bits within the interrupt control registers */
-+
-+	FSL_ATA_INTR_ATA_INTRQ1      = 0x80,
-+	FSL_ATA_INTR_FIFO_UNDERFLOW  = 0x40,
-+	FSL_ATA_INTR_FIFO_OVERFLOW   = 0x20,
-+	FSL_ATA_INTR_CTRL_IDLE       = 0x10,
-+	FSL_ATA_INTR_ATA_INTRQ2      = 0x08,
-+};
-+
-+/*
-+ * This structure contains the timing parameters for
-+ * ATA bus timing in the 5 PIO modes.  The timings
-+ * are in nanoseconds, and are converted to clock
-+ * cycles before being stored in the ATA controller
-+ * timing registers.
-+ */
-+static struct {
-+	short t0, t1, t2_8, t2_16, t2i, t4, t9, tA;
-+} pio_specs[] = {
-+	[0] = {
-+		.t0 = 600, .t1 = 70, .t2_8 = 290, .t2_16 = 165, .t2i = 0,
-+		.t4 = 30,.t9 = 20,.tA = 50
-+	},
-+	[1] = {
-+		.t0 = 383, .t1 = 50, .t2_8 = 290, .t2_16 = 125, .t2i = 0,
-+		.t4 = 20, .t9 = 15, .tA = 50
-+	},
-+	[2] = {
-+		.t0 = 240, .t1 = 30, .t2_8 = 290, .t2_16 = 100, .t2i = 0,
-+		.t4 = 15, .t9 = 10, .tA = 50
-+	},
-+	[3] = {
-+		.t0 = 180, .t1 = 30, .t2_8 = 80, .t2_16 = 80, .t2i = 0,
-+		.t4 = 10, .t9 = 10, .tA = 50
-+	},
-+	[4] = {
-+		.t0 = 120, .t1 = 25, .t2_8 = 70, .t2_16 = 70, .t2i = 0,
-+		.t4 = 10, .t9 = 10, .tA = 50
-+	},
-+};
-+
-+#define NR_PIO_SPECS (sizeof pio_specs / sizeof pio_specs[0])
-+
-+/*
-+ * This structure contains the timing parameters for
-+ * ATA bus timing in the 3 MDMA modes.  The timings
-+ * are in nanoseconds, and are converted to clock
-+ * cycles before being stored in the ATA controller
-+ * timing registers.
-+ */
-+static struct {
-+	short t0M, tD, tH, tJ, tKW, tM, tN, tJNH;
-+} mdma_specs[] = {
-+	[0] = {
-+		.t0M = 480, .tD = 215, .tH = 20, .tJ = 20, .tKW = 215,
-+		.tM = 50, .tN = 15, .tJNH = 20
-+	},
-+	[1] = {
-+		.t0M = 150, .tD = 80, .tH = 15, .tJ = 5, .tKW = 50,
-+		.tM = 30, .tN = 10, .tJNH = 15
-+	},
-+	[2] = {
-+		.t0M = 120, .tD = 70, .tH = 10, .tJ = 5, .tKW = 25,
-+		.tM = 25, .tN = 10, .tJNH = 10
-+	},
-+};
-+
-+#define NR_MDMA_SPECS (sizeof mdma_specs / sizeof mdma_specs[0])
-+
-+/*
-+ * This structure contains the timing parameters for
-+ * ATA bus timing in the 6 UDMA modes.  The timings
-+ * are in nanoseconds, and are converted to clock
-+ * cycles before being stored in the ATA controller
-+ * timing registers.
-+ */
-+static struct {
-+	short t2CYC, tCYC, tDS, tDH, tDVS, tDVH, tCVS, tCVH, tFS_min, tLI_max,
-+	    tMLI, tAZ, tZAH, tENV_min, tSR, tRFS, tRP, tACK, tSS, tDZFS;
-+} udma_specs[] = {
-+	[0] = {
-+		.t2CYC = 235, .tCYC = 114, .tDS = 15, .tDH = 5, .tDVS = 70,
-+		.tDVH = 6, .tCVS = 70, .tCVH = 6, .tFS_min = 0,
-+		.tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20,
-+		.tENV_min = 20, .tSR = 50, .tRFS = 75, .tRP = 160,
-+		.tACK = 20, .tSS = 50, .tDZFS = 80
-+	},
-+	[1] = {
-+		.t2CYC = 156, .tCYC = 75, .tDS = 10, .tDH = 5, .tDVS = 48,
-+		.tDVH = 6, .tCVS = 48, .tCVH = 6, .tFS_min = 0,
-+		.tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20,
-+		.tENV_min = 20, .tSR = 30, .tRFS = 70, .tRP = 125,
-+		.tACK = 20, .tSS = 50, .tDZFS = 63
-+	},
-+	[2] = {
-+		.t2CYC = 117, .tCYC = 55, .tDS = 7, .tDH = 5, .tDVS = 34,
-+		.tDVH = 6, .tCVS = 34, .tCVH = 6, .tFS_min = 0,
-+		.tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20,
-+		.tENV_min = 20, .tSR = 20, .tRFS = 60, .tRP = 100,
-+		.tACK = 20, .tSS = 50, .tDZFS = 47
-+	},
-+	[3] = {
-+		.t2CYC = 86, .tCYC = 39, .tDS = 7, .tDH = 5, .tDVS = 20,
-+		.tDVH = 6, .tCVS = 20, .tCVH = 6, .tFS_min = 0,
-+		.tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20,
-+		.tENV_min = 20, .tSR = 20, .tRFS = 60, .tRP = 100,
-+		.tACK = 20, .tSS = 50, .tDZFS = 35
-+	},
-+	[4] = {
-+		.t2CYC = 57, .tCYC = 25, .tDS = 5, .tDH = 5, .tDVS = 7,
-+		.tDVH = 6, .tCVS = 7, .tCVH = 6, .tFS_min = 0,
-+		.tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20,
-+		.tENV_min = 20, .tSR = 50, .tRFS = 60, .tRP = 100,
-+		.tACK = 20, .tSS = 50, .tDZFS = 25
-+	},
-+	[5] = {
-+		.t2CYC = 38, .tCYC = 17, .tDS = 4, .tDH = 5, .tDVS = 5,
-+		.tDVH = 6, .tCVS = 10, .tCVH = 10, .tFS_min = 0,
-+		.tLI_max = 75, .tMLI = 20, .tAZ = 10, .tZAH = 20,
-+		.tENV_min = 20, .tSR = 20, .tRFS = 50, .tRP = 85,
-+		.tACK = 20, .tSS = 50, .tDZFS = 40
-+	},
-+};
-+
-+#define NR_UDMA_SPECS (sizeof udma_specs / sizeof udma_specs[0])
-+
-+struct fsl_ata_time_regs {
-+	u8 time_off, time_on, time_1, time_2w;
-+	u8 time_2r, time_ax, time_pio_rdx, time_4;
-+	u8 time_9, time_m, time_jn, time_d;
-+	u8 time_k, time_ack, time_env, time_rpx;
-+	u8 time_zah, time_mlix, time_dvh, time_dzfs;
-+	u8 time_dvs, time_cvh, time_ss, time_cyc;
-+};
-+
-+static void update_timing_config(struct fsl_ata_time_regs *tp, struct ata_host *host)
-+{
-+	u32 *lp = (u32 *)tp;
-+	struct pata_fsl_priv *priv = host->private_data;
-+	u32 *ctlp = (u32 *)priv->fsl_ata_regs;
-+	int i;
-+
-+	/* 
-+	 * JKM - this could have endianess issues on BE depending
-+	 * on how the controller is glued to the bus -- probably
-+	 * should rewrite this to write byte at a time.
-+	 */
-+	for (i = 0; i < 5; i++) {
-+		__raw_writel(*lp, ctlp);
-+		lp++;
-+		ctlp++;
-+	}
-+	mb();
-+}
-+
-+/*!
-+ * Calculate values for the ATA bus timing registers and store
-+ * them into the hardware.
-+ *
-+ * @param       xfer_mode   specifies XFER xfer_mode
-+ * @param       pdev        specifies platform_device
-+ *
-+ * @return      EINVAL      speed out of range, or illegal mode
-+ */
-+static int set_ata_bus_timing(u8 xfer_mode, struct platform_device *pdev)
-+{
-+	struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *)
-+					     pdev->dev.platform_data;
-+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
-+
-+	/* get the bus clock cycle time, in ns */
-+	int T = 1 * 1000 * 1000 * 1000 / plat->get_clk_rate();
-+	struct fsl_ata_time_regs tr = {0};
-+	DPRINTK("clk_rate = %d  T = %d\n",plat->get_clk_rate(), T);
-+
-+	/*
-+	 * every mode gets the same t_off and t_on
-+	 */
-+	tr.time_off = 3;
-+	tr.time_on = 3;
-+
-+	if (xfer_mode >= XFER_UDMA_0) {
-+		int speed = xfer_mode - XFER_UDMA_0;
-+		if (speed >= NR_UDMA_SPECS) {
-+			return -EINVAL;
-+		}
-+		tr.time_ack = (udma_specs[speed].tACK + T) / T;
-+		tr.time_env = (udma_specs[speed].tENV_min + T) / T;
-+		tr.time_rpx = (udma_specs[speed].tRP + T) / T + 2;
-+
-+		tr.time_zah = (udma_specs[speed].tZAH + T) / T;
-+		tr.time_mlix = (udma_specs[speed].tMLI + T) / T;
-+		tr.time_dvh = (udma_specs[speed].tDVH + T) / T + 1;
-+		tr.time_dzfs = (udma_specs[speed].tDZFS + T) / T;
-+
-+		tr.time_dvs = (udma_specs[speed].tDVS + T) / T;
-+		tr.time_cvh = (udma_specs[speed].tCVH + T) / T;
-+		tr.time_ss = (udma_specs[speed].tSS + T) / T;
-+		tr.time_cyc = (udma_specs[speed].tCYC + T) / T;
-+	} else if (xfer_mode >= XFER_MW_DMA_0) {
-+		int speed = xfer_mode - XFER_MW_DMA_0;
-+		if (speed >= NR_MDMA_SPECS) {
-+			return -EINVAL;
-+		}
-+		tr.time_m = (mdma_specs[speed].tM + T) / T;
-+		tr.time_jn = (mdma_specs[speed].tJNH + T) / T;
-+		tr.time_d = (mdma_specs[speed].tD + T) / T;
-+
-+		tr.time_k = (mdma_specs[speed].tKW + T) / T;
-+	} else {
-+		int speed = xfer_mode - XFER_PIO_0;
-+		if (speed >= NR_PIO_SPECS) {
-+			return -EINVAL;
-+		}
-+		tr.time_1 = (pio_specs[speed].t1 + T) / T;
-+		tr.time_2w = (pio_specs[speed].t2_8 + T) / T;
-+
-+		tr.time_2r = (pio_specs[speed].t2_8 + T) / T;
-+		tr.time_ax = (pio_specs[speed].tA + T) / T + 2;
-+		tr.time_pio_rdx = 1;
-+		tr.time_4 = (pio_specs[speed].t4 + T) / T;
-+
-+		tr.time_9 = (pio_specs[speed].t9 + T) / T;
-+	}
-+
-+	update_timing_config(&tr, host);
-+
-+	return 0;
-+}
-+
-+static void pata_fsl_set_piomode(struct ata_port *ap, struct ata_device *adev)
-+{
-+	set_ata_bus_timing(adev->pio_mode, to_platform_device(ap->dev));
-+}
-+
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+static void pata_fsl_set_dmamode(struct ata_port *ap, struct ata_device *adev)
-+{
-+	struct pata_fsl_priv *priv = ap->host->private_data;
-+
-+	priv->ultra = adev->dma_mode >= XFER_UDMA_0;
-+
-+	set_ata_bus_timing(adev->dma_mode, to_platform_device(ap->dev));
-+}
-+#endif
-+
-+static int pata_fsl_port_start(struct ata_port *ap)
-+{
-+	return 0;
-+}
-+
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+static void dma_callback(void *arg, int error_status, unsigned int count)
-+{
-+	struct ata_port *ap = arg;
-+	struct pata_fsl_priv *priv = ap->host->private_data;
-+	u8 *ata_regs = priv->fsl_ata_regs;
-+
-+	priv->dma_done = 1;
-+	/* 
-+	 * DMA is finished, so unmask INTRQ from the drive to allow the
-+	 * normal ISR to fire.
-+	 */
-+#if 0
-+	__raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN);
-+#else
-+	WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN);
-+#endif
-+	mb();
-+}
-+
-+static void pata_fsl_bmdma_setup(struct ata_queued_cmd *qc)
-+{
-+	int nr_sg = 0;
-+	int chan;
-+	int dma_mode = 0, dma_ultra;
-+	u8 ata_control;
-+	struct ata_port *ap = qc->ap;
-+	struct pata_fsl_priv *priv = ap->host->private_data;
-+	u8 *ata_regs = priv->fsl_ata_regs;
-+	struct fsl_ata_platform_data *plat = ap->dev->platform_data;
-+	struct scatterlist tmp[plat->max_sg], *tsg, *sg;
-+	int err;
-+
-+	DPRINTK("ENTER\n");
-+
-+	priv->dma_dir = qc->dma_dir;
-+
-+	/*
-+	 * Configure the on-chip ATA interface hardware.
-+	 */
-+	dma_ultra = priv->ultra ?
-+		FSL_ATA_CTRL_DMA_ULTRA : 0;
-+
-+	ata_control = FSL_ATA_CTRL_FIFO_RST_B |
-+		      FSL_ATA_CTRL_ATA_RST_B |
-+		      FSL_ATA_CTRL_DMA_PENDING |
-+		      dma_ultra;
-+
-+	if (qc->dma_dir == DMA_TO_DEVICE) {
-+		chan = priv->dma_wchan;
-+		ata_control |= FSL_ATA_CTRL_FIFO_TX_EN |
-+			      FSL_ATA_CTRL_DMA_WRITE;
-+		dma_mode = DMA_MODE_WRITE;
-+	} else {
-+		chan = priv->dma_rchan;
-+		ata_control |= FSL_ATA_CTRL_FIFO_RCV_EN;
-+		dma_mode = DMA_MODE_READ;
-+	}
-+#if 0
-+	__raw_writel(ata_control, ata_regs + FSL_ATA_CONTROL);
-+	__raw_writel(plat->fifo_alarm, ata_regs + FSL_ATA_FIFO_ALARM);
-+	__raw_writel(FSL_ATA_INTR_ATA_INTRQ1, ata_regs + FSL_ATA_INT_EN);
-+#else
-+	WRITE_ATA8(ata_control, FSL_ATA_CONTROL);
-+	WRITE_ATA8(plat->fifo_alarm, FSL_ATA_FIFO_ALARM);
-+	WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ1, FSL_ATA_INT_EN);
-+#endif
-+	mb();
-+
-+	/*
-+	 * Set up the DMA completion callback.
-+	 */
-+	mxc_dma_callback_set(chan, dma_callback, (void *)ap);
-+
-+	/*
-+	 * Copy the sg list to an array.
-+	 */
-+	tsg = tmp;
-+	ata_for_each_sg(sg, qc) {
-+		memcpy(tsg, sg, sizeof *sg);
-+		tsg++;
-+		nr_sg++;
-+	}
-+	
-+	err = mxc_dma_sg_config(chan, tmp, nr_sg, 0, dma_mode);
-+	if (err) {
-+		printk(KERN_ERR "pata_fsl_bmdma_setup: error %d\n", err);
-+	}
-+	DPRINTK("EXIT\n");
-+}
-+
-+static void pata_fsl_bmdma_start(struct ata_queued_cmd *qc)
-+{
-+	struct ata_port *ap = qc->ap;
-+	struct pata_fsl_priv *priv = ap->host->private_data;
-+	int chan;
-+	int err;
-+
-+	/*
-+	 * Start the channel.
-+	 */
-+	chan = qc->dma_dir == DMA_TO_DEVICE ? priv->dma_wchan : priv->dma_rchan;
-+
-+	priv->dma_done = 0;
-+
-+	err = mxc_dma_enable(chan);
-+	if (err) {
-+		printk(KERN_ERR "%s: : error %d\n", __func__, err);
-+	}
-+
-+	ap->ops->exec_command(ap, &qc->tf);
-+}
-+
-+static void pata_fsl_bmdma_stop(struct ata_queued_cmd *qc)
-+{
-+	struct ata_port *ap = qc->ap;
-+
-+	/* do a dummy read as in ata_bmdma_stop */
-+	ata_altstatus(ap);
-+}
-+
-+static u8 pata_fsl_bmdma_status(struct ata_port *ap)
-+{
-+	struct pata_fsl_priv *priv = ap->host->private_data;
-+
-+	return priv->dma_done ? ATA_DMA_INTR : 0;
-+}
-+
-+static void pata_fsl_dma_init(struct ata_port *ap)
-+{
-+	struct pata_fsl_priv *priv = ap->host->private_data;
-+
-+	priv->dma_rchan = -1;
-+	priv->dma_wchan = -1;
-+
-+	priv->dma_rchan = mxc_dma_request(MXC_DMA_ATA_RX, "MXC ATA RX");
-+	if (priv->dma_rchan < 0) {
-+		dev_printk(KERN_ERR, ap->dev, "couldn't get RX DMA channel\n");
-+		goto err_out;
-+	}
-+
-+	priv->dma_wchan = mxc_dma_request(MXC_DMA_ATA_TX, "MXC ATA TX");
-+	if (priv->dma_wchan < 0) {
-+		dev_printk(KERN_ERR, ap->dev, "couldn't get TX DMA channel\n");
-+		goto err_out;
-+	}       
-+
-+	dev_printk(KERN_ERR, ap->dev, "rchan=%d wchan=%d\n", priv->dma_rchan,
-+		   priv->dma_wchan);
-+	return;
-+
-+err_out:
-+	ap->mwdma_mask = 0;
-+	ap->udma_mask = 0;
-+	mxc_dma_free(priv->dma_rchan);
-+	mxc_dma_free(priv->dma_wchan);
-+	kfree(priv);
-+}
-+#endif /* CONFIG_FSL_PATA_USE_DMA */
-+
-+static void ata_dummy_noret(struct ata_port *ap) { return; }
-+
-+static struct scsi_host_template pata_fsl_sht = {
-+	.module			= THIS_MODULE,
-+	.name			= DRV_NAME,
-+	.ioctl			= ata_scsi_ioctl,
-+	.queuecommand		= ata_scsi_queuecmd,
-+	.can_queue		= ATA_DEF_QUEUE,
-+	.this_id		= ATA_SHT_THIS_ID,
-+	.sg_tablesize		= LIBATA_MAX_PRD,
-+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-+	.emulated		= ATA_SHT_EMULATED,
-+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-+	.proc_name		= DRV_NAME,
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+	.dma_boundary		= FSL_ATA_MAX_SG_LEN,
-+#endif
-+	.slave_configure	= ata_scsi_slave_config,
-+	.slave_destroy		= ata_scsi_slave_destroy,
-+	.bios_param		= ata_std_bios_param,
-+};
-+
-+static struct ata_port_operations pata_fsl_port_ops = {
-+	.set_piomode		= pata_fsl_set_piomode,
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+	.set_dmamode		= pata_fsl_set_dmamode,
-+#endif
-+
-+	.tf_load		= ata_tf_load,
-+	.tf_read		= ata_tf_read,
-+	.check_status		= ata_check_status,
-+	.exec_command		= ata_exec_command,
-+	.dev_select		= ata_std_dev_select,
-+
-+	.freeze			= ata_bmdma_freeze,
-+	.thaw			= ata_bmdma_thaw,
-+	.error_handler		= ata_bmdma_error_handler,
-+	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-+	.cable_detect		= ata_cable_unknown,
-+
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+	.bmdma_setup		= pata_fsl_bmdma_setup,
-+	.bmdma_start		= pata_fsl_bmdma_start,
-+#endif
-+
-+	.qc_prep		= ata_noop_qc_prep,
-+	.qc_issue		= ata_qc_issue_prot,
-+
-+	.data_xfer		= ata_data_xfer_noirq,
-+
-+	.irq_clear		= ata_dummy_noret,
-+	.irq_on			= ata_irq_on,
-+
-+	.port_start		= pata_fsl_port_start,
-+
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+	.bmdma_stop		= pata_fsl_bmdma_stop,
-+	.bmdma_status		= pata_fsl_bmdma_status,
-+#endif
-+};
-+
-+static void fsl_setup_port(struct ata_ioports *ioaddr)
-+{
-+	unsigned int shift = 2;
-+
-+	ioaddr->data_addr	= ioaddr->cmd_addr + (ATA_REG_DATA    << shift);
-+	ioaddr->error_addr	= ioaddr->cmd_addr + (ATA_REG_ERR     << shift);
-+	ioaddr->feature_addr	= ioaddr->cmd_addr + (ATA_REG_FEATURE << shift);
-+	ioaddr->nsect_addr	= ioaddr->cmd_addr + (ATA_REG_NSECT   << shift);
-+	ioaddr->lbal_addr	= ioaddr->cmd_addr + (ATA_REG_LBAL    << shift);
-+	ioaddr->lbam_addr	= ioaddr->cmd_addr + (ATA_REG_LBAM    << shift);
-+	ioaddr->lbah_addr	= ioaddr->cmd_addr + (ATA_REG_LBAH    << shift);
-+	ioaddr->device_addr	= ioaddr->cmd_addr + (ATA_REG_DEVICE  << shift);
-+	ioaddr->status_addr	= ioaddr->cmd_addr + (ATA_REG_STATUS  << shift);
-+	ioaddr->command_addr	= ioaddr->cmd_addr + (ATA_REG_CMD     << shift);
-+}
-+
-+/**
-+ *	pata_fsl_probe		-	attach a platform interface
-+ *	@pdev: platform device
-+ *
-+ *	Register a platform bus integrated ATA host controller
-+ *
-+ *	The 3 platform device resources are used as follows:
-+ *
-+ *		- I/O Base (IORESOURCE_MEM) virt. addr. of ATA controller regs
-+ *		- CTL Base (IORESOURCE_MEM) unused
-+ *		- IRQ	   (IORESOURCE_IRQ) platform IRQ assigned to ATA
-+ *
-+ */
-+static int __devinit pata_fsl_probe(struct platform_device *pdev)
-+{
-+	struct resource *io_res;
-+	struct ata_host *host;
-+	struct ata_port *ap;
-+	struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *)
-+					     pdev->dev.platform_data;
-+	struct pata_fsl_priv *priv;
-+	u8 *ata_regs;
-+	int ret;
-+
-+	DPRINTK("ENTER\n");
-+	/* 
-+	 * Get an ata_host structure for this device
-+	 */
-+	host = ata_host_alloc(&pdev->dev, 1);
-+	if (!host)
-+		return -ENOMEM;
-+	ap = host->ports[0];
-+
-+	/* 
-+	 * Allocate private data
-+	 */
-+	priv = kzalloc(sizeof (struct pata_fsl_priv), GFP_KERNEL);
-+	if(priv == NULL) {
-+		/* free(host); */
-+		return -ENOMEM;
-+	}
-+	host->private_data = priv;
-+
-+	/*
-+	 * Set up resources
-+	 */
-+	if (unlikely(pdev->num_resources != 3)) {
-+		dev_err(&pdev->dev, "invalid number of resources\n");
-+		return -EINVAL;
-+	}
-+
-+	io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	ata_regs = (u8 *)io_res->start;
-+	priv->fsl_ata_regs = ata_regs;
-+	ap->ioaddr.cmd_addr = (void *)(ata_regs + FSL_ATA_DRIVE_DATA);
-+	ap->ioaddr.ctl_addr = (void *)(ata_regs + FSL_ATA_DRIVE_CONTROL);
-+	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
-+	ap->ops = &pata_fsl_port_ops;
-+	ap->pio_mask = 0x7F;
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+	ap->mwdma_mask = 0x7F;
-+	ap->udma_mask = plat->udma_mask;
-+	pata_fsl_sht.sg_tablesize = plat->max_sg;
-+#else
-+	ap->mwdma_mask = 0x00;
-+	ap->udma_mask = 0x00;
-+#endif
-+	fsl_setup_port(&ap->ioaddr);
-+
-+	/*
-+	 * Do platform-specific initialization (e.g. allocate pins,
-+	 * turn on clock).  After this call it is assumed that
-+	 * plat->get_clk_rate() can be called to calculate
-+	 * timing.
-+	 */
-+	if (plat->init && plat->init(pdev)) {
-+		/* REVISIT: don't leak what ata_host_alloc() allocated */
-+		return -ENODEV;
-+	}
-+
-+	/* Deassert the reset bit to enable the interface */
-+	WRITE_ATA8(FSL_ATA_CTRL_ATA_RST_B, FSL_ATA_CONTROL);
-+	mb();
-+
-+	/* Set initial timing and mode */
-+	set_ata_bus_timing(XFER_PIO_4, pdev);
-+
-+#ifdef CONFIG_FSL_PATA_USE_DMA
-+	/* get DMA ready */
-+	pata_fsl_dma_init(ap);
-+#endif
-+
-+	/*
-+	 * Enable the ATA INTRQ interrupt from the bus, but
-+	 * only allow the CPU to see it (INTRQ2) at this point.
-+	 * INTRQ1, which goes to the DMA, will be enabled later.
-+	 */
-+#if 0
-+	__raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN);
-+#else
-+	WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN);
-+#endif
-+	mb();
-+
-+	/* activate */
-+	ret = ata_host_activate(host, platform_get_irq(pdev, 0), ata_interrupt,
-+				 0, &pata_fsl_sht);
-+	DPRINTK("EXIT ret=%d\n", ret);
-+	return ret;
-+}
-+
-+/**
-+ *	pata_fsl_remove	-	unplug a platform interface
-+ *	@pdev: platform device
-+ *
-+ *	A platform bus ATA device has been unplugged. Perform the needed
-+ *	cleanup. Also called on module unload for any active devices.
-+ */
-+static int __devexit pata_fsl_remove(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct ata_host *host = dev_get_drvdata(dev);
-+	struct pata_fsl_priv *priv = host->private_data;
-+	struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *)
-+					     pdev->dev.platform_data;
-+	u8 *ata_regs = priv->fsl_ata_regs;
-+
-+#if 0
-+	__raw_writel(0, ata_regs + FSL_ATA_INT_EN);  /* Disable interrupts */
-+#else
-+	WRITE_ATA8(0, FSL_ATA_INT_EN); /* Disable interrupts */
-+#endif
-+	mb();
-+
-+	ata_host_detach(host);
-+
-+	if (plat->exit)
-+		plat->exit();
-+
-+	kfree(priv);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int pata_fsl_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
-+	struct pata_fsl_priv *priv = host->private_data;
-+	struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *)
-+					     pdev->dev.platform_data;
-+	u8 *ata_regs = priv->fsl_ata_regs;
-+
-+	/* Disable interrupts. */
-+#if 0
-+	__raw_writel(0, ata_regs + FSL_ATA_INT_EN);
-+#else
-+	WRITE_ATA8(0, FSL_ATA_INT_EN);
-+#endif
-+	mb();
-+
-+	if (plat->exit)
-+		plat->exit();
-+
-+	return 0;
-+}
-+
-+static int pata_fsl_resume(struct platform_device *pdev)
-+{
-+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
-+	struct pata_fsl_priv *priv = host->private_data;
-+	struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *)
-+					     pdev->dev.platform_data;
-+	u8 *ata_regs = priv->fsl_ata_regs;
-+
-+	if (plat->init && plat->init(pdev)) {
-+		return -ENODEV;
-+	}
-+
-+	/* Deassert the reset bit to enable the interface */
-+#if 0
-+	__raw_writel(FSL_ATA_CTRL_ATA_RST_B, ata_regs + FSL_ATA_CONTROL);
-+#else
-+	WRITE_ATA8(FSL_ATA_CTRL_ATA_RST_B, FSL_ATA_CONTROL);
-+#endif
-+	mb();
-+
-+	/* Set initial timing and mode */
-+	set_ata_bus_timing(XFER_PIO_4, pdev);
-+
-+	/*
-+	 * Enable hardware interrupts.
-+	 */
-+#if 0
-+	__raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN);
-+#else
-+	WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN);
-+#endif
-+	mb();
-+
-+	return 0;
-+}
-+#endif
-+
-+static struct platform_driver pata_fsl_driver = {
-+	.probe		= pata_fsl_probe,
-+	.remove		= __devexit_p(pata_fsl_remove),
-+#ifdef CONFIG_PM
-+	.suspend	= pata_fsl_suspend,
-+	.resume		= pata_fsl_resume,
-+#endif
-+	.driver = {
-+		.name		= DRV_NAME,
-+		.owner		= THIS_MODULE,
-+	},
-+};
-+
-+static int __init pata_fsl_init(void)
-+{
-+	int ret;
-+
-+	DPRINTK("ENTER\n");
-+	ret = platform_driver_register(&pata_fsl_driver);
-+	DPRINTK("EXIT ret=%d\n", ret);
-+	return ret;
-+}
-+
-+static void __exit pata_fsl_exit(void)
-+{
-+	platform_driver_unregister(&pata_fsl_driver);
-+}
-+module_init(pata_fsl_init);
-+module_exit(pata_fsl_exit);
-+
-+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-+MODULE_DESCRIPTION("low-level driver for Freescale ATA");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -60,6 +60,69 @@ config CRYPTO_DEV_GEODE
- 	  To compile this driver as a module, choose M here: the module
- 	  will be called geode-aes.
- 
-+config CRYPTO_DEV_MCFCAU
-+	bool "Support for Freescale Coldfire Cryptographic Acceleration Unit (CAU)"
-+	depends on M5445X
-+	select CRYPTO_ALGAPI
-+	help
-+	  The cryptographic acceleration unit (CAU) is a ColdFire coprocessor
-+	  implementing a set of specialized operations in hardware. For example, you can
-+	  find it on MCF5445X.
-+
-+config CRYPTO_DEV_MCFCAU_DES
-+	tristate "DES and Triple DES cipher algorithms (MCF5445X)"
-+	depends on CRYPTO_DEV_MCFCAU
-+	select CRYPTO_ALGAPI
-+	select CRYPTO_BLKCIPHER
-+	help
-+	  DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
-+	  
-+	  Say 'Y' here to use the CAU coprocessor for 
-+	  the CryptoAPI DES and 3DES alogrithms.
-+	 	  
-+	  To compile this driver as a module, choose M here: the module
-+	  will be called mcfcau-des.
-+
-+config CRYPTO_DEV_MCFCAU_AES
-+	tristate "AES cipher algorithm (MCF5445X)"
-+	depends on CRYPTO_DEV_MCFCAU
-+	select CRYPTO_ALGAPI
-+	select CRYPTO_BLKCIPHER
-+	help
-+	  AES cipher algorithm (FIPS 197).
-+
-+	  Say 'Y' here to use the CAU coprocessor for
-+	  the CryptoAPI AES alogrithm.
-+
-+	  To compile this driver as a module, choose M here: the module
-+	  will be called mcfcau-aes.
-+
-+config CRYPTO_DEV_MCFCAU_MD5
-+	tristate "MD5 digest algorithm (MCF5445X)"
-+	depends on CRYPTO_DEV_MCFCAU
-+	select CRYPTO_ALGAPI
-+	help
-+	  MD5 message digest algorithm (RFC1321).
-+
-+	  Say 'Y' here to use the CAU coprocessor for
-+	  the CryptoAPI MD5 alogrithm.
-+
-+	  To compile this driver as a module, choose M here: the module
-+	  will be called mcfcau-md5.
-+
-+config CRYPTO_DEV_MCFCAU_SHA1
-+	tristate "SHA1 digest algorithm (MCF5445X)"
-+	depends on CRYPTO_DEV_MCFCAU
-+	select CRYPTO_ALGAPI
-+	help
-+	  SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
-+
-+	  Say 'Y' here to use the CAU coprocessor for
-+	  the CryptoAPI SHA1 alogrithm.
-+
-+	  To compile this driver as a module, choose M here: the module
-+	  will be called mcfcau-sha1.
-+
- config ZCRYPT
- 	tristate "Support for PCI-attached cryptographic adapters"
- 	depends on S390
---- a/drivers/crypto/Makefile
-+++ b/drivers/crypto/Makefile
-@@ -2,3 +2,8 @@ obj-$(CONFIG_CRYPTO_DEV_PADLOCK_AES) += 
- obj-$(CONFIG_CRYPTO_DEV_PADLOCK_SHA) += padlock-sha.o
- obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o
- obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
-+obj-$(CONFIG_CRYPTO_DEV_MCFCAU) += mcfcau.o
-+obj-$(CONFIG_CRYPTO_DEV_MCFCAU_DES) += mcfcau-des.o
-+obj-$(CONFIG_CRYPTO_DEV_MCFCAU_AES) += mcfcau-aes.o
-+obj-$(CONFIG_CRYPTO_DEV_MCFCAU_MD5) += mcfcau-md5.o
-+obj-$(CONFIG_CRYPTO_DEV_MCFCAU_SHA1) += mcfcau-sha1.o
---- /dev/null
-+++ b/drivers/crypto/mcfcau-aes.c
-@@ -0,0 +1,311 @@
-+ /***************************************************************************
-+ * mcfcau-aes.c - Implementation of AES Cipher Algorithm
-+ *                for Freescale ColdFire Cryptographic Acceleration Unit (CAU).
-+ *
-+ * Author: Andrey Butok
-+ * Copyright Freescale Semiconductor Inc.  2007
-+ *
-+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software Foundation,
-+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.01	17 September 2007	Andrey Butok
-+ *   		Initial Release - developed on 2.6.20 Linux kernel.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/crypto.h>
-+
-+/*
-+#undef DEBUG
-+#define DEBUG 1
-+*/
-+
-+#include "mcfcau.h"
-+
-+#define MCFCAU_AES_MIN_KEY_SIZE	(16)
-+#define MCFCAU_AES_MAX_KEY_SIZE	(32)
-+#define MCFCAU_AES_BLOCK_SIZE	(16)
-+
-+#define	MCFCAU_AES_DRIVER_DESC		"AES ColdFire CAU driver"
-+#define	MCFCAU_AES_DRIVER_VERSION	"v0.01"
-+
-+struct mcfcau_aes_ctx {
-+	int Nr_1;
-+	u32 buf[120];
-+	u32 buf_tmp[16];
-+};
-+
-+static u32 mcfcau_rco_tab[10]={ 0x01000000, 0x02000000, 0x04000000, 0x08000000,
-+				0x10000000, 0x20000000, 0x40000000, 0x80000000,
-+				0x1b000000, 0x36000000};
-+
-+int mcfcau_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key,
-+		       unsigned int key_len)
-+{
-+	struct mcfcau_aes_ctx *ctx = crypto_tfm_ctx(tfm);
-+	const u32 * key = (const u32 *)in_key;
-+	u32 *flags = &tfm->crt_flags;
-+	u32 i;
-+	u32* key_sch = (&ctx->buf[0]);
-+	u32 * temp_p, * rcon_p;
-+	u32 Nx;
-+	u32 Nk;
-+	unsigned long iflags;
-+
-+	DBG("\n");
-+
-+	if (key_len % 8) {
-+		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
-+		return -EINVAL;
-+	}
-+
-+	Nk = key_len>>2;
-+
-+	for(i=0;i<Nk;i++){
-+		key_sch[i] = key[i];
-+	}
-+
-+	ctx->Nr_1 = Nk+5;
-+
-+	/* Key Expansion */
-+	temp_p=&key_sch[Nk-1];
-+	rcon_p=&mcfcau_rco_tab[0];
-+
-+	spin_lock_irqsave(&mcfcau_lock, iflags);
-+
-+	asm volatile ("move.l	%0, %%a1"::"m"(temp_p):"a1");
-+	asm volatile ("move.l	%0, %%a3"::"m"(rcon_p):"a3");
-+	asm volatile ("move.l	%0, %%a4"::"m"(key_sch):"a4");
-+
-+	Nx=(Nk+7)<<2; /* (Nr+1)*Nb */
-+
-+	for(i=Nk; i<Nx; i++)
-+	{
-+		/* temp = key_sch[Nk-1] */
-+		asm volatile ("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CAA):"a1");
-+
-+		if(i%Nk==0){
-+			asm volatile ("moveq	#8, %%d0":::"d0");
-+			/* CAA=RotWord(temp) */
-+			asm volatile ("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA):"d0");
-+			/* SubWord(CAA) */
-+			asm volatile ("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_AESS+MCFCAU_CAA));
-+			/* ACC xor rcon[i/Nk] */
-+			asm volatile ("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CAA):"a3");
-+
-+		}else if((Nk>6) && (i%Nk ==4)){
-+			/* SubWord(ACC) */
-+			asm volatile ("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_AESS+MCFCAU_CAA));
-+		}
-+
-+		/* key_sch[i]^=key_sch[i-Nk]; store ACC to key_sch[i] */
-+		asm volatile ("cp0ld.l	(%%a4)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CAA):"a4");
-+		asm volatile ("cp0st.l	%%d0,(%%a1),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CAA));
-+	}
-+	spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+
-+	return 0;
-+}
-+
-+
-+/* encrypt a block of text */
-+static void mcfcau_aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
-+{
-+	struct mcfcau_aes_ctx *ctx = crypto_tfm_ctx(tfm);
-+	const int Nr_1 = ctx->Nr_1;
-+
-+	u32* key_sch = &(ctx->buf[0]);
-+	u32 i;
-+	unsigned long iflags;
-+
-+	DBG("\n");
-+
-+	spin_lock_irqsave(&mcfcau_lock, iflags);
-+	asm("move.l	%0, %%a1"::"m"(in):"a1");
-+	asm("move.l	%0, %%a0"::"m"(key_sch):"a0");
-+	/* state=in */
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1");
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a1");
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3):"a1");
-+	/* AddRoundKey() */
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0");
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0");
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0");
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0");
-+
-+	for(i=Nr_1;i>0;i--){
-+		/* SubBytes(state) */
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA0));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA1));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA2));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA3));
-+		/* ShiftRows(state) */
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESR));
-+		/* MixColumns(state); AddRoundKey() */
-+		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_AESC+MCFCAU_CA0):"a0");
-+		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_AESC+MCFCAU_CA1):"a0");
-+		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_AESC+MCFCAU_CA2):"a0");
-+		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_AESC+MCFCAU_CA3):"a0");
-+	}
-+	/* SubBytes(state)*/
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA0));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA3));
-+	/* ShiftRows(state) */
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESR));
-+	/* AddRoundKey() */
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0");
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0");
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0");
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0");
-+	/* out = state */
-+	asm("move.l	%0, %%a1"		::"m"(out):"a1");
-+	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA0):"d0");
-+	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA1):"d1");
-+
-+	asm("move.l	%%d0,(%%a1)+":::"a1");
-+	asm("move.l	%%d1,(%%a1)+":::"a1");
-+
-+	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"d0");
-+	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"d1");
-+
-+	asm("move.l	%%d0,(%%a1)+":::"a1");
-+	asm("move.l	%%d1,(%%a1)+":::"a1");
-+	spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+}
-+
-+
-+/* decrypt a block of text */
-+static void mcfcau_aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
-+{
-+	struct mcfcau_aes_ctx *ctx = crypto_tfm_ctx(tfm);
-+	u32* key_sch = &(ctx->buf[0]);
-+	u32 i;
-+	unsigned long iflags;
-+	const int Nr_1 = ctx->Nr_1;
-+	key_sch=&key_sch[(Nr_1+2)*4];
-+
-+	DBG("\n");
-+
-+	spin_lock_irqsave(&mcfcau_lock, iflags);
-+
-+	asm("move.l	%0, %%a1"::"m"(in):"a1");
-+	asm("move.l	%0, %%a0"::"m"(key_sch):"a0");
-+	/* state=in */
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1");
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a1");
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3):"a1");
-+	/* AddRoundKey() */
-+	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0");
-+	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0");
-+	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0");
-+	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0");
-+
-+	for(i=Nr_1;i>0;i--){
-+		/* InvShiftRows(state) */
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIR));
-+		/* InvSubBytes(state) */
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA3));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA2));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA1));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA0));
-+		/* InvMixColumns(state); AddRoundKey() */
-+		asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_AESIC+MCFCAU_CA3):"a0");
-+		asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_AESIC+MCFCAU_CA2):"a0");
-+		asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_AESIC+MCFCAU_CA1):"a0");
-+		asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_AESIC+MCFCAU_CA0):"a0");
-+	}
-+	/* InvShiftRows(state) */
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIR));
-+	/* InvSubBytes(state)*/
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA3));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA0));
-+	/* AddRoundKey() */
-+	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0");
-+	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0");
-+	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0");
-+	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0");
-+	/* out = state */
-+	asm("move.l	%0, %%a1"		::"m"(out):"a1");
-+	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA0):"d0");
-+	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA1):"d1");
-+
-+	asm("move.l	%%d0,(%%a1)+":::"a1");
-+	asm("move.l	%%d1,(%%a1)+":::"a1");
-+
-+	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"d0");
-+	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"d1");
-+
-+	asm("move.l	%%d0,(%%a1)+":::"a1");
-+	asm("move.l	%%d1,(%%a1)+":::"a1");
-+	spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+
-+}
-+
-+
-+static struct crypto_alg mcfcau_aes_alg = {
-+	.cra_name		=	"aes",
-+	.cra_driver_name	=	"aes-mcfcau",
-+	.cra_priority		=	MCFCAU_CRA_PRIORITY,
-+	.cra_flags		=	CRYPTO_ALG_TYPE_CIPHER,
-+	.cra_blocksize		=	MCFCAU_AES_BLOCK_SIZE,
-+	.cra_ctxsize		=	sizeof(struct mcfcau_aes_ctx),
-+	.cra_alignmask		=	3,
-+	.cra_module		=	THIS_MODULE,
-+	.cra_list		=	LIST_HEAD_INIT(mcfcau_aes_alg.cra_list),
-+	.cra_u			=	{
-+		.cipher = {
-+			.cia_min_keysize	=	MCFCAU_AES_MIN_KEY_SIZE,
-+			.cia_max_keysize	=	MCFCAU_AES_MAX_KEY_SIZE,
-+			.cia_setkey	   	= 	mcfcau_aes_setkey,
-+			.cia_encrypt	 	=	mcfcau_aes_encrypt,
-+			.cia_decrypt	  	=	mcfcau_aes_decrypt
-+		}
-+	}
-+};
-+
-+static int __init mcfcau_aes_init(void)
-+{
-+	int ret = crypto_register_alg(&mcfcau_aes_alg);
-+
-+	printk(KERN_INFO MCFCAU_AES_DRIVER_DESC " "
-+		MCFCAU_AES_DRIVER_VERSION " %s.\n",ret?"failed":"registered");
-+	return ret;
-+}
-+
-+static void __exit mcfcau_aes_fini(void)
-+{
-+	crypto_unregister_alg(&mcfcau_aes_alg);
-+	printk(KERN_INFO MCFCAU_AES_DRIVER_DESC " "
-+		MCFCAU_AES_DRIVER_VERSION " unregistered.\n");
-+}
-+
-+module_init(mcfcau_aes_init);
-+module_exit(mcfcau_aes_fini);
-+
-+MODULE_DESCRIPTION(MCFCAU_AES_DRIVER_DESC);
-+MODULE_LICENSE("Dual BSD/GPL");
-+MODULE_AUTHOR("Andrey Butok");
---- /dev/null
-+++ b/drivers/crypto/mcfcau.c
-@@ -0,0 +1,32 @@
-+/***************************************************************************
-+ * mcfcau.c - Implementation of DES & Triple DES EDE Cipher Algorithms
-+ *                for Freescale ColdFire Cryptographic Acceleration Unit (CAU).
-+ *
-+ * Author: Andrey Butok
-+ * Copyright Freescale Semiconductor Inc.  2007
-+ *
-+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software Foundation,
-+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.01	28 September 2006	Andrey Butok
-+ *   		Initial Release - developed on 2.6.20 Linux kernel.
-+ */
-+#include <linux/module.h>
-+
-+DEFINE_SPINLOCK(mcfcau_lock);
-+EXPORT_SYMBOL(mcfcau_lock);
---- /dev/null
-+++ b/drivers/crypto/mcfcau-des.c
-@@ -0,0 +1,437 @@
-+/***************************************************************************
-+ * mcfcau-des.c - Implementation of DES & Triple DES EDE Cipher Algorithms
-+ *                for Freescale ColdFire Cryptographic Acceleration Unit (CAU).
-+ *
-+ * Author: Andrey Butok
-+ * Copyright Freescale Semiconductor Inc.  2007
-+ *
-+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software Foundation,
-+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.01	14 August 2007	Andrey Butok
-+ *   		Initial Release - developed on 2.6.20 Linux kernel.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/crypto.h>
-+#include <linux/types.h>
-+
-+/*
-+#undef DEBUG
-+#define DEBUG 1
-+*/
-+
-+#include "mcfcau.h"
-+
-+#define MCFCAU_DES_KEY_SIZE		(8)
-+#define MCFCAU_DES_EXPKEY_WORDS		(32)
-+#define MCFCAU_DES_BLOCK_SIZE		(8)
-+
-+#define MCFCAU_DES3_EDE_KEY_SIZE	(3 * MCFCAU_DES_KEY_SIZE)
-+#define MCFCAU_DES3_EDE_EXPKEY_WORDS	(3 * MCFCAU_DES_EXPKEY_WORDS)
-+#define MCFCAU_DES3_EDE_BLOCK_SIZE	(MCFCAU_DES_BLOCK_SIZE)
-+
-+#define	MCFCAU_DES_DRIVER_DESC		"DES & 3DES ColdFire CAU driver"
-+#define	MCFCAU_DES_DRIVER_VERSION	"v0.01"
-+
-+struct mcfcau_des_ctx {
-+	u32 expkey[MCFCAU_DES_EXPKEY_WORDS];
-+};
-+
-+struct mcfcau_des3_ede_ctx {
-+	u32 expkey[MCFCAU_DES3_EDE_EXPKEY_WORDS];
-+};
-+
-+/* DES round operations */
-+static inline void mcfcau_des_encipher(void)
-+{
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESK));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_IP+MCFCAU_KSL1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_FP+MCFCAU_KSL1));
-+}
-+
-+static inline void mcfcau_des_decipher(void)
-+{
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESK+MCFCAU_DC));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_IP+MCFCAU_KSR1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_FP+MCFCAU_KSL1));
-+}
-+
-+
-+static int mcfcau_des_setkey(struct crypto_tfm *tfm, const u8 *key_p,
-+		      unsigned int keylen)
-+{
-+	struct mcfcau_des_ctx *dctx = crypto_tfm_ctx(tfm);
-+	u32 *flags = &tfm->crt_flags;
-+	u32 * key = (u32 *) key_p;
-+
-+	DBG("\n");
-+
-+	/*
-+	* RFC2451: Weak key checks SHOULD be performed.
-+	*
-+	* FIPS 74:
-+	*   Keys having duals are keys which produce all zeros, all ones, or
-+	*   alternating zero-one patterns in the C and D registers after Permuted
-+	*   Choice 1 has operated on the key.
-+	*
-+	*/
-+	if(*flags & CRYPTO_TFM_REQ_WEAK_KEY){ /* FIPS 74 */
-+		if(key[0]<0xE001E00l){
-+			if(key[0]<0x1FE01FE0){
-+				if(key[0]<0x01E001E0){
-+					if(((key[0]==0x01010101)&&(key[1]==0x01010101))||
-+						((key[0]==0x011F011F)&&(key[1]==0x010E010E)) )
-+						goto WEAK_KEY;
-+				}
-+				else{
-+					if(((key[0]==0x01E001E0)&&(key[1]==0x01F101F1))||
-+						((key[0]==0x01FE01FE)&&(key[1]==0x01FE01FE)) )
-+						goto WEAK_KEY;
-+				}
-+			}
-+			else{
-+				if(key[0]<0x1F1F1F1F){
-+					if(((key[0]==0x1FE01FE0)&&(key[1]==0x0EF10EF1))||
-+						((key[0]==0x1F011F0l)&&(key[1]==0x0E010E01)) )
-+						goto WEAK_KEY;
-+				}
-+				else{
-+					if(((key[0]==0x1F1F1F1F)&&(key[1]==0x0E0E0E0E))||
-+						((key[0]==0x1FFE1FFE)&&(key[1]==0x0EFE0EFE)) )
-+						goto WEAK_KEY;
-+				}
-+			}
-+		} else {
-+			if(key[0]<0xFE01FE01){
-+				if(key[0]<0xE0E0E0E0){
-+					if(((key[0]==0xE001E00l)&&(key[1]==0xF101F101))||
-+						((key[0]==0xE01FE01F)&&(key[1]==0xF10EF10E)) )
-+						goto WEAK_KEY;
-+				}
-+				else{
-+					if(((key[0]==0xE0E0E0E0)&&(key[1]==0xF1F1F1F1))||
-+						((key[0]==0xE0FEE0FE)&&(key[1]==0xF1FEF1FE)) )
-+						goto WEAK_KEY;
-+				}
-+			}
-+			else{
-+				if(key[0]<0xFEE0FEE0){
-+					if(((key[0]==0xFE01FE01)&&(key[1]==0xFE01FE01))||
-+						((key[0]==0xFE1FFE1F)&&(key[1]==0xFE0EFE0E)) )
-+						goto WEAK_KEY;
-+				}
-+				else{
-+					if(((key[0]==0xFEE0FEE0)&&(key[1]==0xFEF1FEF1))||
-+						((key[0]==0xFEFEFEFE)&&(key[1]==0xFEFEFEFE)) )
-+						goto WEAK_KEY;
-+				}
-+			}
-+		}
-+	}
-+	memcpy(dctx->expkey, key_p, keylen);
-+	return 0;
-+WEAK_KEY:
-+	*flags |= CRYPTO_TFM_RES_WEAK_KEY;
-+	return -EINVAL;
-+}
-+
-+
-+void mcfcau_des_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-+{
-+	struct mcfcau_des_ctx *ctx = crypto_tfm_ctx(tfm);
-+	u32 * des_key_tmp = ctx->expkey;
-+	unsigned long iflags;
-+
-+	DBG("\n");
-+
-+	spin_lock_irqsave(&mcfcau_lock, iflags);
-+
-+	asm("move.l	%0, %%a0"::"m"(src):"a0");
-+	asm("move.l	%0, %%a1"::"m"(des_key_tmp):"a1");
-+
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0");
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3));
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
-+	asm("cp0ld.l	(%%a1),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1));
-+
-+	mcfcau_des_encipher();
-+
-+	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"d0");
-+	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"d1");
-+	asm("move.l	%0, %%a1"		::"m"(dst):"a1");
-+	asm("move.l	%d0,(%a1)+");
-+	asm("move.l	%d1,(%a1)");
-+
-+	spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+}
-+
-+
-+void mcfcau_des_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-+{
-+	struct mcfcau_des_ctx *ctx = crypto_tfm_ctx(tfm);
-+	u32 * des_key_tmp = ctx->expkey;
-+	unsigned long iflags;
-+
-+	DBG("\n");
-+
-+	spin_lock_irqsave(&mcfcau_lock, iflags);
-+
-+	asm("move.l	%0, %%a0"::"m"(src):"a0");
-+	asm("move.l	%0, %%a1"::"m"(des_key_tmp):"a1");
-+
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0");
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3));
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
-+	asm("cp0ld.l	(%%a1),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1));
-+
-+	mcfcau_des_decipher();
-+
-+	asm("move.l	%0, %%a1"		::"m"(dst):"a1");
-+	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"d0");
-+	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"d1");
-+	asm("move.l	%d0,(%a1)+");
-+	asm("move.l	%d1,(%a1)");
-+
-+	spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+}
-+
-+
-+/*
-+ * RFC2451:
-+ *
-+ *   For DES-EDE3, there is no known need to reject weak or
-+ *   complementation keys.  Any weakness is obviated by the use of
-+ *   multiple keys.
-+ *
-+ *   However, if the first two or last two independent 64-bit keys are
-+ *   equal (k1 == k2 or k2 == k3), then the DES3 operation is simply the
-+ *   same as DES.  Implementers MUST reject keys that exhibit this
-+ *   property.
-+ *
-+ */
-+
-+static int mcfcau_des3_ede_setkey(struct crypto_tfm *tfm, const u8 *key_p, unsigned int keylen)
-+{
-+	const u32 *key = (const u32 *)key_p;
-+	struct mcfcau_des3_ede_ctx *dctx = crypto_tfm_ctx(tfm);
-+	u32 *flags = &tfm->crt_flags;
-+
-+DBG("\n");
-+
-+	if (unlikely(!((key[0] ^ key[2]) | (key[1] ^ key[3])) ||
-+		     !((key[2] ^ key[4]) | (key[3] ^ key[5]))))
-+	{
-+		*flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED;
-+		return -EINVAL;
-+	}
-+
-+	memcpy(dctx->expkey,key_p,keylen);
-+
-+	return 0;
-+}
-+
-+static void mcfcau_des3_ede_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-+{
-+	struct mcfcau_des3_ede_ctx *dctx = crypto_tfm_ctx(tfm);
-+	const u32 * des_key_tmp = dctx->expkey;
-+	unsigned long iflags;
-+
-+	DBG("\n");
-+
-+	spin_lock_irqsave(&mcfcau_lock, iflags);
-+
-+	/*EK1*/
-+	asm("move.l	%0, %%a0"::"m"(src):"a0");
-+	asm("move.l	%0, %%a1"::"m"(des_key_tmp):"a1");
-+
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0");
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3));
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1");
-+
-+	mcfcau_des_encipher();
-+
-+	/*DK2*/
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1");
-+
-+	mcfcau_des_decipher();
-+
-+	/*EK3*/
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
-+	asm("cp0ld.l	(%%a1),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1));
-+
-+	mcfcau_des_encipher();
-+
-+	asm("move.l	%0, %%a1"		::"m"(dst):"a1");
-+	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"d0");
-+	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"d1");
-+	asm("move.l	%d0,(%a1)+");
-+	asm("move.l	%d1,(%a1)");
-+
-+	spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+}
-+
-+static void mcfcau_des3_ede_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-+{
-+	struct mcfcau_des3_ede_ctx *dctx = crypto_tfm_ctx(tfm);
-+	const u32 * des_key_tmp = dctx->expkey + 6 - 2;
-+	unsigned long iflags;
-+
-+	DBG("\n");
-+
-+	spin_lock_irqsave(&mcfcau_lock, iflags);
-+
-+	/*DK3*/
-+	asm("move.l	%0, %%a0"::"m"(src):"a0");
-+	asm("move.l	%0, %%a1"::"m"(des_key_tmp):"a1");
-+
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0");
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3));
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
-+	asm("cp0ld.l	(%%a1),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1));
-+
-+	mcfcau_des_decipher();
-+
-+	/*EK2*/
-+	asm("suba.l	#12,%a1");	/*dec key pointer*/
-+
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
-+	asm("cp0ld.l	(%%a1),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1));
-+
-+	mcfcau_des_encipher();
-+
-+	/*DK1*/
-+	asm("suba.l	#12,%a1");	/*dec key pointer*/
-+
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
-+	asm("cp0ld.l	(%%a1),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1));
-+
-+	mcfcau_des_decipher();
-+
-+	asm("move.l	%0, %%a1"		::"m"(dst):"a1");
-+	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"d0");
-+	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"d1");
-+	asm("move.l	%d0,(%a1)+");
-+	asm("move.l	%d1,(%a1)");
-+
-+	spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+}
-+
-+
-+static struct crypto_alg mcfcau_des_alg = {
-+	.cra_name		=	"des",
-+	.cra_driver_name	=	"des-mcfcau",
-+	.cra_priority		=	MCFCAU_CRA_PRIORITY,
-+	.cra_flags		=	CRYPTO_ALG_TYPE_CIPHER,
-+	.cra_blocksize		=	MCFCAU_DES_BLOCK_SIZE,
-+	.cra_ctxsize		=	sizeof(struct mcfcau_des_ctx),
-+	.cra_module		=	THIS_MODULE,
-+	.cra_alignmask		=	3,
-+	.cra_list		=	LIST_HEAD_INIT(mcfcau_des_alg.cra_list),
-+	.cra_u			=	{ .cipher = {
-+	.cia_min_keysize	=	MCFCAU_DES_KEY_SIZE,
-+	.cia_max_keysize	=	MCFCAU_DES_KEY_SIZE,
-+	.cia_setkey		=	mcfcau_des_setkey,
-+	.cia_encrypt		=	mcfcau_des_encrypt,
-+	.cia_decrypt		=	mcfcau_des_decrypt } }
-+};
-+
-+static struct crypto_alg mcfcau_des3_ede_alg = {
-+	.cra_name		=	"des3_ede",
-+	.cra_driver_name	=	"des3_ede-mcfcau",
-+	.cra_priority		=	MCFCAU_CRA_PRIORITY,
-+	.cra_flags		=	CRYPTO_ALG_TYPE_CIPHER,
-+	.cra_blocksize		=	MCFCAU_DES3_EDE_BLOCK_SIZE,
-+	.cra_ctxsize		=	sizeof(struct mcfcau_des3_ede_ctx),
-+	.cra_module		=	THIS_MODULE,
-+	.cra_alignmask		=	3,
-+	.cra_list		=	LIST_HEAD_INIT(mcfcau_des3_ede_alg.cra_list),
-+	.cra_u			=	{ .cipher = {
-+	.cia_min_keysize	=	MCFCAU_DES3_EDE_KEY_SIZE,
-+	.cia_max_keysize	=	MCFCAU_DES3_EDE_KEY_SIZE,
-+	.cia_setkey		=	mcfcau_des3_ede_setkey,
-+	.cia_encrypt		=	mcfcau_des3_ede_encrypt,
-+	.cia_decrypt		=	mcfcau_des3_ede_decrypt } }
-+};
-+
-+MODULE_ALIAS("mcfcau_des3_ede");
-+
-+static int __init mcfcau_des_init(void)
-+{
-+	int ret;
-+
-+	ret = crypto_register_alg(&mcfcau_des_alg);
-+	if (ret < 0)
-+		goto out;
-+
-+	ret = crypto_register_alg(&mcfcau_des3_ede_alg);
-+	if (ret < 0)
-+		crypto_unregister_alg(&mcfcau_des_alg);
-+out:
-+	printk(KERN_INFO MCFCAU_DES_DRIVER_DESC " "
-+		MCFCAU_DES_DRIVER_VERSION " %s.\n",ret?"failed":"registered");
-+	return ret;
-+}
-+
-+static void __exit mcfcau_des_exit(void)
-+{
-+	crypto_unregister_alg(&mcfcau_des3_ede_alg);
-+	crypto_unregister_alg(&mcfcau_des_alg);
-+
-+	printk(KERN_INFO MCFCAU_DES_DRIVER_DESC " "
-+		MCFCAU_DES_DRIVER_VERSION " unregistered.\n");
-+}
-+
-+module_init(mcfcau_des_init);
-+module_exit(mcfcau_des_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms for ColdFire CAU");
-+MODULE_AUTHOR("Andrey Butok");
---- /dev/null
-+++ b/drivers/crypto/mcfcau.h
-@@ -0,0 +1,98 @@
-+/***************************************************************************
-+ * mcfcau.h - Common header file for Freescale ColdFire
-+ *            Cryptographic Acceleration Unit (CAU) drivers.
-+ *
-+ * Author: Andrey Butok
-+ * Copyright Freescale Semiconductor Inc.  2007
-+ *
-+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software Foundation,
-+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.01	14 August 2007	Andrey Butok
-+ */
-+
-+#ifndef MCFCAU_H
-+#define MCFCAU_H
-+
-+#include <linux/spinlock.h>
-+
-+/* CAU Registers (CAx) */
-+#define MCFCAU_CASR		(0x0)
-+#define MCFCAU_CAA		(0x1)
-+#define MCFCAU_CA0		(0x2)
-+#define MCFCAU_CA1		(0x3)
-+#define MCFCAU_CA2		(0x4)
-+#define MCFCAU_CA3		(0x5)
-+#define MCFCAU_CA4		(0x6)
-+#define MCFCAU_CA5		(0x7)
-+
-+ /* CAU Commands */
-+#define MCFCAU_CNOP		(0x000)
-+#define MCFCAU_LDR		(0x010)
-+#define MCFCAU_STR		(0x020)
-+#define MCFCAU_ADR		(0x030)
-+#define MCFCAU_RADR		(0x040)
-+#define MCFCAU_ADRA		(0x050)
-+#define MCFCAU_XOR		(0x060)
-+#define MCFCAU_ROTL		(0x070)
-+#define MCFCAU_MVRA		(0x080)
-+#define MCFCAU_MVAR		(0x090)
-+#define MCFCAU_AESS		(0x0A0)
-+#define MCFCAU_AESIS		(0x0B0)
-+#define MCFCAU_AESC		(0x0C0)
-+#define MCFCAU_AESIC		(0x0D0)
-+#define MCFCAU_AESR		(0x0E0)
-+#define MCFCAU_AESIR		(0x0F0)
-+#define MCFCAU_DESR		(0x100)
-+#define MCFCAU_DESK		(0x110)
-+#define MCFCAU_HASH		(0x120)
-+#define MCFCAU_SHS		(0x130)
-+#define MCFCAU_MDS		(0x140)
-+#define MCFCAU_ILL		(0x1F0)
-+
-+/* DESR Fields */
-+#define MCFCAU_IP		(0x08)	/* initial permutation */
-+#define MCFCAU_FP		(0x04)	/* final permutation */
-+#define MCFCAU_KSL1		(0x00)	/* key schedule left 1 bit */
-+#define MCFCAU_KSL2		(0x01)	/* key schedule left 2 bits */
-+#define MCFCAU_KSR1		(0x02)	/* key schedule right 1 bit */
-+#define MCFCAU_KSR2		(0x03)	/* key schedule right 2 bits */
-+
-+/* DESK Field */
-+#define MCFCAU_DC		(0x01)	/* decrypt key schedule */
-+#define MCFCAU_CP		(0x02)	/* check parity */
-+
-+/* HASH Functions Codes */
-+#define MCFCAU_HFF		(0x0)	/* MD5 F() CA1&CA2 | ~CA1&CA3 */
-+#define MCFCAU_HFG		(0x1)	/* MD5 G() CA1&CA3 | CA2&~CA3 */
-+#define MCFCAU_HFH		(0x2)	/* MD5 H(), SHA Parity() CA1^CA2^CA3 */
-+#define MCFCAU_HFI		(0x3)	/* MD5 I() CA2^(CA1|~CA3) */
-+#define MCFCAU_HFC		(0x4)	/* SHA Ch() CA1&CA2 ^ ~CA1&CA3 */
-+#define MCFCAU_HFM		(0x5)	/* SHA Maj() CA1&CA2 ^ CA1&CA3 ^ CA2&CA3 */
-+
-+#define MCFCAU_CRA_PRIORITY	(300)
-+
-+extern spinlock_t mcfcau_lock;
-+
-+#ifdef DEBUG
-+#define DBG(fmt, args...)	printk( "[%s]  " fmt , __FUNCTION__, ## args)
-+#else
-+#define DBG(fmt, args...)	do{}while(0)
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/drivers/crypto/mcfcau-md5.c
-@@ -0,0 +1,654 @@
-+ /***************************************************************************
-+ * mcfcau-md5.c - Implementation of MD5 Message Digest Algorithm (RFC1321)
-+ *                for Freescale ColdFire Cryptographic Acceleration Unit (CAU).
-+ *
-+ * Author: Andrey Butok
-+ * Copyright Freescale Semiconductor Inc.  2007
-+ *
-+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software Foundation,
-+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.01	30 September 2007	Andrey Butok
-+ *   		Initial Release - developed on 2.6.20 Linux kernel.
-+ */
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/string.h>
-+#include <linux/crypto.h>
-+#include <linux/types.h>
-+#include <asm/byteorder.h>
-+
-+/*
-+#undef DEBUG
-+#define DEBUG 1
-+*/
-+
-+#include "mcfcau.h"
-+
-+
-+#define MCFCAU_MD5_DIGEST_SIZE		(16)
-+#define MCFCAU_MD5_HMAC_BLOCK_SIZE	(64)
-+#define MCFCAU_MD5_BLOCK_WORDS		(16)
-+#define MCFCAU_MD5_HASH_WORDS		(4)
-+
-+#define	MCFCAU_MD5_DRIVER_DESC		"MD5 ColdFire CAU driver"
-+#define	MCFCAU_MD5_DRIVER_VERSION	"v0.01"
-+
-+
-+struct mcfcau_md5_ctx {
-+	u32 hash[MCFCAU_MD5_HASH_WORDS];
-+	u32 block[MCFCAU_MD5_BLOCK_WORDS];
-+	u64 byte_count;
-+};
-+
-+u32 mcfcau_md5_t[64]={0xd76aa478, 0xe8c7b756, 0x242070db, 0xc1bdceee,
-+			0xf57c0faf, 0x4787c62a, 0xa8304613, 0xfd469501,
-+			0x698098d8, 0x8b44f7af, 0xffff5bb1, 0x895cd7be,
-+			0x6b901122, 0xfd987193, 0xa679438e, 0x49b40821,
-+			0xf61e2562, 0xc040b340, 0x265e5a51, 0xe9b6c7aa,
-+			0xd62f105d, 0x02441453, 0xd8a1e681, 0xe7d3fbc8,
-+			0x21e1cde6, 0xc33707d6, 0xf4d50d87, 0x455a14ed,
-+			0xa9e3e905, 0xfcefa3f8, 0x676f02d9, 0x8d2a4c8a,
-+			0xfffa3942, 0x8771f681, 0x6d9d6122, 0xfde5380c,
-+			0xa4beea44, 0x4bdecfa9, 0xf6bb4b60, 0xbebfbc70,
-+			0x289b7ec6, 0xeaa127fa, 0xd4ef3085, 0x04881d05,
-+			0xd9d4d039, 0xe6db99e5, 0x1fa27cf8, 0xc4ac5665,
-+			0xf4292244, 0x432aff97, 0xab9423a7, 0xfc93a039,
-+			0x655b59c3, 0x8f0ccc92, 0xffeff47d, 0x85845dd1,
-+			0x6fa87e4f, 0xfe2ce6e0, 0xa3014314, 0x4e0811a1,
-+			0xf7537e82, 0xbd3af235, 0x2ad7d2bb, 0xeb86d391};
-+
-+
-+
-+static void mcfcau_md5_transform(u32 *hash, u32 const *in)
-+{
-+	int i;
-+	u32 * md5_t_p=&mcfcau_md5_t[0];
-+	unsigned long iflags;
-+
-+	spin_lock_irqsave(&mcfcau_lock, iflags);
-+	asm("move.l	%0, %%a1"::"m"(hash):"a1");
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CAA):"a1");/*a*/
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1");/*b*/
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a1");/*c*/
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3):"a1");/*d*/
-+	asm("move.l	%0, %%a0"::"m"(in):"a0");	/* X[] */
-+	asm("move.l	%0, %%a3"::"m"(md5_t_p):"a3");	/* T[] */
-+
-+	
-+	/*  Round 1 */
-+	asm("moveq.l	#7, %%d4":::"d4");	/* for rotating by 7 */
-+	asm("moveq.l	#12, %%d5":::"d5");	/* for rotating by 12 */
-+	asm("moveq.l	#17, %%d6":::"d6");	/* for rotating by 17 */
-+	asm("moveq.l	#22, %%d7":::"d7");	/* for rotating by 22 */
-+
-+	for(i=0; i<4;i++){
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFF));		/* a+F(b,c,d) */
-+		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");	/* add byterev x[i] */
-+		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");	/* add t[i] */
-+		asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));		/* rotate by 7 */
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));		/* add b */
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));			/* register to register shift */
-+
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFF));
-+		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+		asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFF));
-+		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+		asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFF));
-+		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+		asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+	};
-+
-+
-+	/* Round 2 */
-+	asm("moveq.l	#5, %%d4":::"d4");	/* for rotating by 5 */
-+	asm("moveq.l	#9, %%d5":::"d5");	/* for rotating by 9 */
-+	asm("moveq.l	#14, %%d6":::"d6");	/* for rotating by 14 */
-+	asm("moveq.l	#20, %%d7":::"d7");	/* for rotating by 20 */
-+
-+	asm("lea -60(%%a0),%%a0":::"a0");
-+
-+	for(i=0; i<2;i++){
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
-+		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+		asm("lea	20(%%a0),%%a0"		:::"a0");
-+		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+		asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
-+		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+		asm("lea	20(%%a0),%%a0"		:::"a0");
-+		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+		asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
-+		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+		asm("lea	-44(%%a0),%%a0"		:::"a0");
-+		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+		asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
-+		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+		asm("lea	20(%%a0),%%a0"		:::"a0");
-+		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+		asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+	};
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	20(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	-44(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	20(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	20(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	-44(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	20(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	20(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	-28(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+
-+	/* Round 3 */
-+	asm("moveq.l	#4, %%d4":::"d4");	/* for rotating by 5 */
-+	asm("moveq.l	#11, %%d5":::"d5");	/* for rotating by 9 */
-+	asm("moveq.l	#16, %%d6":::"d6");	/* for rotating by 14 */
-+	asm("moveq.l	#23, %%d7":::"d7");	/* for rotating by 20 */
-+
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	12(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	12(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	12(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	-52(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	12(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	12(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	12(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	12(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	-52(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	12(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	12(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	12(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	12(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	12(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	-52(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	-8(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	
-+	/* Round 4 */
-+	asm("moveq.l	#6, %%d4":::"d4");	/* for rotating by 6 */
-+	asm("moveq.l	#10, %%d5":::"d5");	/* for rotating by 10 */
-+	asm("moveq.l	#15, %%d6":::"d6");	/* for rotating by 15 */
-+	asm("moveq.l	#21, %%d7":::"d7");	/* for rotating by 21 */
-+
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	28(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	28(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	-36(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	28(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	-36(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	28(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	-36(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	28(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	28(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	-36(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	28(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	-36(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	28(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	-36(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	28(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
-+	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
-+	asm("lea	28(%%a0),%%a0"		:::"a0");
-+	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
-+	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
-+
-+	
-+	asm("move.l	%0, %%a1"::"m"(hash):"a1");
-+
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1");/*a*/
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA1):"a1");/*b*/
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA2):"a1");/*c*/
-+	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA3):"a1");/*d*/
-+
-+	asm("cp0st.l	%%d0,-(%%a1),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"a1");/*d*/
-+	asm("cp0st.l	%%d0,-(%%a1),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"a1");/*c*/
-+	asm("cp0st.l	%%d0,-(%%a1),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA1):"a1");/*b*/
-+	asm("cp0st.l	%%d0,-(%%a1),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CAA):"a1");/*a*/
-+	spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+}
-+
-+static inline void le32_to_cpu_array(u32 *buf, unsigned int words)
-+{
-+	while (words--) {
-+		__le32_to_cpus(buf);
-+		buf++;
-+	}
-+}
-+
-+static inline void cpu_to_le32_array(u32 *buf, unsigned int words)
-+{
-+	while (words--) {
-+		__cpu_to_le32s(buf);
-+		buf++;
-+	}
-+}
-+
-+static void mcfcau_md5_initialization(struct crypto_tfm *tfm)
-+{
-+	struct mcfcau_md5_ctx *mctx = crypto_tfm_ctx(tfm);
-+
-+	DBG("\n");
-+	mctx->hash[0] = 0x67452301;
-+	mctx->hash[1] = 0xefcdab89;
-+	mctx->hash[2] = 0x98badcfe;
-+	mctx->hash[3] = 0x10325476;
-+	mctx->byte_count = 0;
-+}
-+
-+static void mcfcau_md5_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len)
-+{
-+	struct mcfcau_md5_ctx *mctx = crypto_tfm_ctx(tfm);
-+	const u32 avail = sizeof(mctx->block) - (mctx->byte_count & 0x3f);
-+
-+	DBG("\n");
-+	mctx->byte_count += len;
-+
-+	if (avail > len) {
-+		memcpy((char *)mctx->block + (sizeof(mctx->block) - avail),
-+		       data, len);
-+	}
-+	else {
-+		memcpy((char *)mctx->block + (sizeof(mctx->block) - avail), data, avail);
-+
-+		mcfcau_md5_transform(mctx->hash, mctx->block);
-+		data += avail;
-+		len -= avail;
-+
-+		while (len >= sizeof(mctx->block)) {
-+			memcpy(mctx->block, data, sizeof(mctx->block));
-+			mcfcau_md5_transform(mctx->hash, mctx->block);
-+			data += sizeof(mctx->block);
-+			len -= sizeof(mctx->block);
-+		}
-+
-+		memcpy(mctx->block, data, len);
-+	}
-+}
-+
-+static void mcfcau_md5_final(struct crypto_tfm *tfm, u8 *out)
-+{
-+	struct mcfcau_md5_ctx *mctx = crypto_tfm_ctx(tfm);
-+	const unsigned int offset = mctx->byte_count & 0x3f;
-+	char *p = (char *)mctx->block + offset;
-+	int padding = 56 - (offset + 1);
-+
-+	DBG("\n");
-+
-+	*p++ = 0x80;
-+	if (padding < 0) {
-+		memset(p, 0x00, padding + sizeof (u64));
-+		mcfcau_md5_transform(mctx->hash, mctx->block);
-+		p = (char *)mctx->block;
-+		padding = 56;
-+	}
-+
-+	memset(p, 0, padding);
-+	mctx->block[14] = mctx->byte_count << 3;
-+	mctx->block[15] = mctx->byte_count >> 29;
-+	le32_to_cpu_array(&mctx->block[14], 2);
-+
-+	mcfcau_md5_transform(mctx->hash, mctx->block);
-+
-+	cpu_to_le32_array(mctx->hash, sizeof(mctx->hash) / sizeof(u32));
-+	memcpy(out, mctx->hash, sizeof(mctx->hash));
-+	memset(mctx, 0, sizeof(*mctx));
-+}
-+
-+static struct crypto_alg mcfcau_md5_alg = {
-+	.cra_name		=	"md5",
-+	.cra_driver_name	=	"md5-mcfcau",
-+	.cra_priority		=	MCFCAU_CRA_PRIORITY,
-+	.cra_flags		=	CRYPTO_ALG_TYPE_DIGEST,
-+	.cra_blocksize		=	MCFCAU_MD5_HMAC_BLOCK_SIZE,
-+	.cra_ctxsize		=	sizeof(struct mcfcau_md5_ctx),
-+	.cra_module		=	THIS_MODULE,
-+	.cra_list		=	LIST_HEAD_INIT(mcfcau_md5_alg.cra_list),
-+	.cra_u			=	{ .digest = {
-+	.dia_digestsize		=	MCFCAU_MD5_DIGEST_SIZE,
-+	.dia_init   		= 	mcfcau_md5_initialization,
-+	.dia_update 		=	mcfcau_md5_update,
-+	.dia_final  		=	mcfcau_md5_final } }
-+};
-+
-+static int __init mcfcau_md5_init(void)
-+{
-+	int ret = crypto_register_alg(&mcfcau_md5_alg);
-+	printk(KERN_INFO MCFCAU_MD5_DRIVER_DESC " "
-+		MCFCAU_MD5_DRIVER_VERSION " %s.\n",ret?"failed":"registered");
-+	return ret;
-+}
-+
-+static void __exit mcfcau_md5_exit(void)
-+{
-+	crypto_unregister_alg(&mcfcau_md5_alg);
-+	printk(KERN_INFO MCFCAU_MD5_DRIVER_DESC " "
-+		MCFCAU_MD5_DRIVER_VERSION " unregistered.\n");
-+}
-+
-+module_init(mcfcau_md5_init);
-+module_exit(mcfcau_md5_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION(MCFCAU_MD5_DRIVER_DESC);
-+MODULE_AUTHOR("Andrey Butok");
---- /dev/null
-+++ b/drivers/crypto/mcfcau-sha1.c
-@@ -0,0 +1,280 @@
-+ /***************************************************************************
-+ * mcfcau-sha1.c - Implementation of SHA1 Secure Hash Algorithm
-+ *                for Freescale ColdFire Cryptographic Acceleration Unit (CAU).
-+ *
-+ * Author: Andrey Butok
-+ * Copyright Freescale Semiconductor Inc.  2007
-+ *
-+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software Foundation,
-+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ * v0.01	15 October 2007	Andrey Butok
-+ *   		Initial Release - developed on 2.6.20 Linux kernel.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mm.h>
-+#include <linux/crypto.h>
-+#include <linux/types.h>
-+
-+
-+/*
-+#undef DEBUG
-+#define DEBUG 1
-+*/
-+
-+#include "mcfcau.h"
-+
-+#define MCFCAU_SHA1_DIGEST_WORDS	(5)
-+#define MCFCAU_SHA1_WORKSPACE_WORDS	(80)
-+
-+#define MCFCAU_SHA1_DIGEST_SIZE		(20)
-+#define MCFCAU_SHA1_HMAC_BLOCK_SIZE	(64)
-+
-+#define	MCFCAU_SHA1_DRIVER_DESC		"SHA1 ColdFire CAU driver"
-+#define	MCFCAU_SHA1_DRIVER_VERSION	"v0.01"
-+
-+struct mcfcau_sha1_ctx {
-+        u64 count;
-+        u32 state[5];
-+        u8 buffer[64];
-+};
-+
-+const static u32 K[4]={0x5A827999L,	/* Rounds  0-19: sqrt(2) * 2^30 */
-+			0x6ED9EBA1L,	/* Rounds 20-39: sqrt(3) * 2^30 */
-+			0x8F1BBCDCL,	/* Rounds 40-59: sqrt(5) * 2^30 */
-+			0xCA62C1D6L};	/* Rounds 60-79: sqrt(10) * 2^30 */
-+
-+static void noinline mcfcau_sha1_transform(__u32 *digest, const char *in, __u32 *W)
-+{
-+	int i;
-+	u32 * tmp_p;
-+	unsigned long iflags;
-+
-+	/* (a) Devide M(i) into 16 words W */
-+	for (i = 0; i < 16; i++)
-+		W[i] = ((const u32 *)in)[i];
-+
-+	/* (b) W[i+16] = S^1(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i]) */
-+	tmp_p=&W[16];
-+
-+	spin_lock_irqsave(&mcfcau_lock, iflags);
-+	asm("move.l	%0, %%a0"::"m"(tmp_p):"a0");
-+	asm("moveq.l	#1, %%d3":::"d3");
-+
-+	for (i = 0; i < 64; i++){
-+		asm("cp0ld.l	-64(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0));
-+		asm("cp0ld.l	-56(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA0));
-+		asm("cp0ld.l	-32(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA0));
-+		asm("cp0ld.l	-12(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA0));
-+		asm("cp0ld.l	%%d3,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CA0):"d3");
-+		asm("cp0st.l	%%d0,(%%a0)+,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA0));
-+	}
-+
-+	/* (c) */
-+	asm("move.l	%0, %%a0"::"m"(digest):"a0");
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a0"); /* a */
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1):"a0"); /* b */
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0"); /* c */
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3):"a0"); /* d */
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA4):"a0"); /* e */
-+
-+	/* (d) */
-+	asm("moveq.l	#5, %%d0":::"d0");
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MVRA+MCFCAU_CA0));
-+	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA)); /*S^5(A)*/
-+
-+	tmp_p=(u32*)K;
-+	asm("move.l	%0, %%a0"::"m"(tmp_p):"a0");
-+	asm("move.l	%0, %%a1"::"m"(W):"a1");
-+
-+	for (i = 0; i < 20; i++) {
-+		/* t = f1(b, c, d) + K1 + rol32(a, 5) + e + W[i]; */
-+		/* e = d; d = c; c = rol32(b, 30); b = a; a = t; */
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFC)); /*f(b,c,d)*/
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/
-+		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/
-+		asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_SHS));
-+	}
-+
-+	asm("add.l #4,%%a0"	:::"a0"); /* update K */
-+
-+	for (; i < 40; i ++) {
-+		/* t = f2(b, c, d) + K2 + rol32(a, 5) + e + W[i]; */
-+		/* e = d; d = c; c = rol32(b, 30); b = a; a = t; */
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH)); /*f(b,c,d)*/
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/
-+		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/
-+		asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_SHS));
-+	}
-+
-+	asm("add.l #4,%%a0"	:::"a0"); /* update K */
-+
-+	for (; i < 60; i ++) {
-+		/* t = f3(b, c, d) + K3 + rol32(a, 5) + e + W[i]; */
-+		/* e = d; d = c; c = rol32(b, 30); b = a; a = t; */
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFM)); /*f(b,c,d)*/
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/
-+		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/
-+		asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_SHS));
-+	}
-+
-+	asm("add.l #4,%%a0"	:::"a0"); /* update K */
-+
-+	for (; i < 80; i ++) {
-+		/* t = f2(b, c, d) + K4 + rol32(a, 5) + e + W[i]; */
-+		/* e = d; d = c; c = rol32(b, 30); b = a; a = t; */
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH)); /*f(b,c,d)*/
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/
-+		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/
-+		asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/
-+		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_SHS));
-+	}
-+
-+	/* (e) */
-+	asm("move.l	%0, %%a0"::"m"(digest):"a0");
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA0):"a0"); /* +a */
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA1):"a0"); /* +b */
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA2):"a0"); /* +c */
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA3):"a0"); /* +d */
-+	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA4):"a0"); /* +e */
-+
-+	asm("cp0st.l	%%d0,-(%%a0),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA4):"a0");
-+	asm("cp0st.l	%%d0,-(%%a0),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"a0");
-+	asm("cp0st.l	%%d0,-(%%a0),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"a0");
-+	asm("cp0st.l	%%d0,-(%%a0),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA1):"a0");
-+	asm("cp0st.l	%%d0,-(%%a0),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA0):"a0");
-+	spin_unlock_irqrestore(&mcfcau_lock, iflags);
-+}
-+
-+static void mcfcau_sha1_init(struct crypto_tfm *tfm)
-+{
-+	struct mcfcau_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
-+	static const struct mcfcau_sha1_ctx initstate = {
-+	  0,
-+	  { 0x67452301, 0xEFCDAB89, 0x98BADCFE, 0x10325476, 0xC3D2E1F0 },
-+	  { 0, }
-+	};
-+
-+	*sctx = initstate;
-+}
-+
-+static void mcfcau_sha1_update(struct crypto_tfm *tfm, const u8 *data,
-+			unsigned int len)
-+{
-+	struct mcfcau_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
-+	unsigned int partial, done;
-+	const u8 *src;
-+
-+	partial = sctx->count & 0x3f;
-+	sctx->count += len;
-+	done = 0;
-+	src = data;
-+
-+	if ((partial + len) > 63) {
-+		u32 temp[MCFCAU_SHA1_WORKSPACE_WORDS];
-+
-+		if (partial) {
-+			done = -partial;
-+			memcpy(sctx->buffer + partial, data, done + 64);
-+			src = sctx->buffer;
-+		}
-+
-+		do {
-+			mcfcau_sha1_transform(sctx->state, src, temp);
-+			done += 64;
-+			src = data + done;
-+		} while (done + 63 < len);
-+
-+		memset(temp, 0, sizeof(temp));
-+		partial = 0;
-+	}
-+	memcpy(sctx->buffer + partial, src, len - done);
-+}
-+
-+
-+/* Add padding and return the message digest. */
-+static void mcfcau_sha1_final(struct crypto_tfm *tfm, u8 *out)
-+{
-+	struct mcfcau_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
-+	u32 *dst = (u32 *)out;
-+	u32 i, index, padlen;
-+	u64 bits;
-+	static const u8 padding[64] = { 0x80, };
-+
-+	bits = sctx->count << 3;
-+
-+	/* Pad out to 56 mod 64 */
-+	index = sctx->count & 0x3f;
-+	padlen = (index < 56) ? (56 - index) : ((64+56) - index);
-+	mcfcau_sha1_update(tfm, padding, padlen);
-+
-+	/* Append length */
-+	mcfcau_sha1_update(tfm, (const u8 *)&bits, sizeof(bits));
-+
-+	/* Store state in digest */
-+	for (i = 0; i < 5; i++)
-+		dst[i] = sctx->state[i];
-+
-+
-+	/* Wipe context */
-+	memset(sctx, 0, sizeof *sctx);
-+}
-+
-+static struct crypto_alg mcfcau_sha1_alg = {
-+	.cra_name	=	"sha1",
-+	.cra_driver_name=	"sha1-mcfcau",
-+	.cra_priority	=	MCFCAU_CRA_PRIORITY,
-+	.cra_flags	=	CRYPTO_ALG_TYPE_DIGEST,
-+	.cra_blocksize	=	MCFCAU_SHA1_HMAC_BLOCK_SIZE,
-+	.cra_ctxsize	=	sizeof(struct mcfcau_sha1_ctx),
-+	.cra_module	=	THIS_MODULE,
-+	.cra_alignmask	=	3,
-+	.cra_list       =       LIST_HEAD_INIT(mcfcau_sha1_alg.cra_list),
-+	.cra_u		=	{ .digest = {
-+	.dia_digestsize	=	MCFCAU_SHA1_DIGEST_SIZE,
-+	.dia_init   	= 	mcfcau_sha1_init,
-+	.dia_update 	=	mcfcau_sha1_update,
-+	.dia_final  	=	mcfcau_sha1_final } }
-+};
-+
-+static int __init init(void)
-+{
-+	int ret = crypto_register_alg(&mcfcau_sha1_alg);
-+	printk(KERN_INFO MCFCAU_SHA1_DRIVER_DESC " "
-+		MCFCAU_SHA1_DRIVER_VERSION " %s.\n",ret?"failed":"registered");
-+	return ret;
-+}
-+
-+static void __exit fini(void)
-+{
-+	crypto_unregister_alg(&mcfcau_sha1_alg);
-+	printk(KERN_INFO MCFCAU_SHA1_DRIVER_DESC " "
-+		MCFCAU_SHA1_DRIVER_VERSION " unregistered.\n");
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION(MCFCAU_SHA1_DRIVER_DESC);
-+MODULE_AUTHOR("Andrey Butok");
---- a/drivers/dma/Makefile
-+++ b/drivers/dma/Makefile
-@@ -4,3 +4,5 @@ obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
- ioatdma-objs := ioat.o ioat_dma.o ioat_dca.o
- obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
- obj-$(CONFIG_FSL_DMA) += fsldma.o
-+obj-$(CONFIG_MCD_DMA) += mcddma.o
-+mcddma-objs := MCD_dmaApi.o MCD_tasks.o MCD_tasksInit.o
---- /dev/null
-+++ b/drivers/dma/MCD_dmaApi.c
-@@ -0,0 +1,965 @@
-+/*
-+ * drivers/dma/MCD_dmaApi.c
-+ *
-+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
-+ *     Kurt Mahan <kmahan@freescale.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include "MCD_dma.h"
-+#include "MCD_tasksInit.h"
-+#include "MCD_progCheck.h"
-+
-+/********************************************************************/
-+/*
-+ * This is an API-internal pointer to the DMA's registers
-+ */
-+dmaRegs *MCD_dmaBar;
-+
-+/*
-+ * These are the real and model task tables as generated by the
-+ * build process
-+ */
-+extern TaskTableEntry MCD_realTaskTableSrc[NCHANNELS];
-+extern TaskTableEntry MCD_modelTaskTableSrc[NUMOFVARIANTS];
-+
-+/*
-+ * However, this (usually) gets relocated to on-chip SRAM, at which
-+ * point we access them as these tables
-+ */
-+volatile TaskTableEntry *MCD_taskTable;
-+TaskTableEntry *MCD_modelTaskTable;
-+
-+
-+/*
-+ * MCD_chStatus[] is an array of status indicators for remembering
-+ * whether a DMA has ever been attempted on each channel, pausing
-+ * status, etc.
-+ */
-+static int MCD_chStatus[NCHANNELS] =
-+{
-+    MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA,
-+    MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA,
-+    MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA,
-+    MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA
-+};
-+
-+/*
-+ * Prototypes for local functions
-+ */
-+static void MCD_memcpy (int *dest, int *src, u32 size);
-+static void MCD_resmActions (int channel);
-+
-+/*
-+ * Buffer descriptors used for storage of progress info for single Dmas
-+ * Also used as storage for the DMA for CRCs for single DMAs
-+ * Otherwise, the DMA does not parse these buffer descriptors
-+ */
-+#ifdef MCD_INCLUDE_EU
-+extern MCD_bufDesc MCD_singleBufDescs[NCHANNELS];
-+#else
-+MCD_bufDesc MCD_singleBufDescs[NCHANNELS];
-+#endif
-+MCD_bufDesc *MCD_relocBuffDesc;
-+
-+
-+/*
-+ * Defines for the debug control register's functions
-+ */
-+#define DBG_CTL_COMP1_TASK  (0x00002000) /* have comparator 1 look for a task # */
-+#define DBG_CTL_ENABLE      (DBG_CTL_AUTO_ARM    | \
-+                             DBG_CTL_BREAK       | \
-+                             DBG_CTL_INT_BREAK   | \
-+                             DBG_CTL_COMP1_TASK)
-+#define DBG_CTL_DISABLE     (DBG_CTL_AUTO_ARM    | \
-+                             DBG_CTL_INT_BREAK   | \
-+                             DBG_CTL_COMP1_TASK)
-+#define DBG_KILL_ALL_STAT   (0xFFFFFFFF)
-+
-+/*
-+ * Offset to context save area where progress info is stored
-+ */
-+#define CSAVE_OFFSET        10
-+
-+/*
-+ * Defines for Byte Swapping
-+ */
-+#define MCD_BYTE_SWAP_KILLER    0xFFF8888F
-+#define MCD_NO_BYTE_SWAP_ATALL  0x00040000
-+
-+/*
-+ * Execution Unit Identifiers
-+ */
-+#define MAC  0  /* legacy - not used */
-+#define LUAC 1  /* legacy - not used */
-+#define CRC  2  /* legacy - not used */
-+#define LURC 3  /* Logic Unit with CRC */
-+
-+/*
-+ * Task Identifiers
-+ */
-+#define TASK_CHAINNOEU  0
-+#define TASK_SINGLENOEU 1
-+#ifdef MCD_INCLUDE_EU
-+#define TASK_CHAINEU    2
-+#define TASK_SINGLEEU   3
-+#define TASK_FECRX      4
-+#define TASK_FECTX      5
-+#else
-+#define TASK_CHAINEU    0
-+#define TASK_SINGLEEU   1
-+#define TASK_FECRX      2
-+#define TASK_FECTX      3
-+#endif
-+
-+/*
-+ * Structure to remember which variant is on which channel
-+ */
-+typedef struct MCD_remVariants_struct MCD_remVariant;
-+struct MCD_remVariants_struct
-+{
-+   int remDestRsdIncr[NCHANNELS];  /* -1,0,1 */
-+   int remSrcRsdIncr[NCHANNELS];   /* -1,0,1 */
-+   s16 remDestIncr[NCHANNELS];     /* DestIncr */
-+   s16 remSrcIncr[NCHANNELS];      /* srcIncr */
-+   u32 remXferSize[NCHANNELS];     /* xferSize */
-+};
-+
-+/*
-+ * Structure to remember the startDma parameters for each channel
-+ */
-+MCD_remVariant MCD_remVariants;
-+
-+/********************************************************************/
-+/*
-+ * Function: MCD_initDma
-+ * Purpose:  Initializes the DMA API by setting up a pointer to the DMA
-+ *           registers, relocating and creating the appropriate task
-+ *           structures, and setting up some global settings
-+ * Arguments:
-+ *  dmaBarAddr    - pointer to the multichannel DMA registers
-+ *  taskTableDest - location to move DMA task code and structs to
-+ *  flags         - operational parameters
-+ * Return Value:
-+ *  MCD_TABLE_UNALIGNED if taskTableDest is not 512-byte aligned
-+ *  MCD_OK otherwise
-+ */
-+extern u32 MCD_funcDescTab0[];
-+
-+int MCD_initDma (dmaRegs *dmaBarAddr, void *taskTableDest, u32 flags)
-+{
-+    int i;
-+    TaskTableEntry *entryPtr;
-+
-+    /* Setup the local pointer to register set */
-+    MCD_dmaBar = dmaBarAddr;
-+
-+    /* Do we need to move/create a task table */
-+    if ((flags & MCD_RELOC_TASKS) != 0)
-+    {
-+        int fixedSize;
-+        u32 *fixedPtr;
-+        int varTabsOffset, funcDescTabsOffset, contextSavesOffset;
-+        int taskDescTabsOffset;
-+        int taskTableSize, varTabsSize, funcDescTabsSize, contextSavesSize;
-+        int taskDescTabSize;
-+
-+        int i;
-+
-+        /* Check if physical address is aligned on 512 byte boundary */
-+        if (((u32)taskTableDest & 0x000001ff) != 0)
-+            return(MCD_TABLE_UNALIGNED);
-+
-+        MCD_taskTable = taskTableDest; /* set up local pointer to task Table */
-+
-+        /*
-+         * Create a task table:
-+         * - compute aligned base offsets for variable tables and
-+         *   function descriptor tables, then
-+         * - loop through the task table and setup the pointers
-+         * - copy over model task table with the the actual task descriptor
-+         *   tables
-+         */
-+        taskTableSize = NCHANNELS * sizeof(TaskTableEntry);
-+        /* Align variable tables to size */
-+        varTabsOffset = taskTableSize + (u32)taskTableDest;
-+        if ((varTabsOffset & (VAR_TAB_SIZE - 1)) != 0)
-+            varTabsOffset = (varTabsOffset + VAR_TAB_SIZE) & (~VAR_TAB_SIZE);
-+        /* Align function descriptor tables */
-+        varTabsSize = NCHANNELS * VAR_TAB_SIZE;
-+        funcDescTabsOffset = varTabsOffset + varTabsSize;
-+
-+        if ((funcDescTabsOffset & (FUNCDESC_TAB_SIZE - 1)) != 0)
-+            funcDescTabsOffset = (funcDescTabsOffset + FUNCDESC_TAB_SIZE) &
-+            (~FUNCDESC_TAB_SIZE);
-+
-+        funcDescTabsSize = FUNCDESC_TAB_NUM * FUNCDESC_TAB_SIZE;
-+        contextSavesOffset = funcDescTabsOffset + funcDescTabsSize;
-+        contextSavesSize = (NCHANNELS * CONTEXT_SAVE_SIZE);
-+        fixedSize = taskTableSize + varTabsSize + funcDescTabsSize +
-+                    contextSavesSize;
-+
-+        /* Zero the thing out */
-+        fixedPtr = (u32 *)taskTableDest;
-+        for (i = 0;i<(fixedSize/4);i++)
-+            fixedPtr[i] = 0;
-+
-+        entryPtr = (TaskTableEntry*)MCD_taskTable;
-+        /* Set up fixed pointers */
-+        for (i = 0; i < NCHANNELS; i++)
-+        {
-+            entryPtr[i].varTab = (u32)varTabsOffset; /* update ptr to local value */
-+            entryPtr[i].FDTandFlags = (u32)funcDescTabsOffset | MCD_TT_FLAGS_DEF;
-+            entryPtr[i].contextSaveSpace = (u32)contextSavesOffset;
-+            varTabsOffset += VAR_TAB_SIZE;
-+#ifdef MCD_INCLUDE_EU /* if not there is only one, just point to the same one */
-+            funcDescTabsOffset += FUNCDESC_TAB_SIZE;
-+#endif
-+            contextSavesOffset += CONTEXT_SAVE_SIZE;
-+        }
-+        /* Copy over the function descriptor table */
-+        for ( i = 0; i < FUNCDESC_TAB_NUM; i++)
-+        {
-+            MCD_memcpy((void*)(entryPtr[i].FDTandFlags & ~MCD_TT_FLAGS_MASK),
-+                       (void*)MCD_funcDescTab0, FUNCDESC_TAB_SIZE);
-+        }
-+
-+        /* Copy model task table to where the context save stuff leaves off */
-+        MCD_modelTaskTable = (TaskTableEntry*)contextSavesOffset;
-+
-+        MCD_memcpy ((void*)MCD_modelTaskTable, (void*)MCD_modelTaskTableSrc,
-+                    NUMOFVARIANTS * sizeof(TaskTableEntry));
-+
-+        /* Point to local version of model task table */
-+        entryPtr = MCD_modelTaskTable;
-+        taskDescTabsOffset = (u32)MCD_modelTaskTable +
-+                            (NUMOFVARIANTS * sizeof(TaskTableEntry));
-+
-+        /* Copy actual task code and update TDT ptrs in local model task table */
-+        for (i = 0; i < NUMOFVARIANTS; i++)
-+        {
-+            taskDescTabSize = entryPtr[i].TDTend - entryPtr[i].TDTstart + 4;
-+            MCD_memcpy ((void*)taskDescTabsOffset, (void*)entryPtr[i].TDTstart, taskDescTabSize);
-+            entryPtr[i].TDTstart = (u32)taskDescTabsOffset;
-+            taskDescTabsOffset += taskDescTabSize;
-+            entryPtr[i].TDTend = (u32)taskDescTabsOffset - 4;
-+        }
-+#ifdef MCD_INCLUDE_EU 
-+        /* 
-+         * Tack single DMA BDs onto end of code so API controls where
-+         * they are since DMA might write to them 
-+         */
-+        MCD_relocBuffDesc = (MCD_bufDesc*)(entryPtr[NUMOFVARIANTS - 1].TDTend + 4);
-+#else 
-+        /* 
-+         * DMA does not touch them so they can be wherever and we don't need to
-+         * waste SRAM on them 
-+         */
-+        MCD_relocBuffDesc = MCD_singleBufDescs;
-+#endif
-+    }
-+    else
-+    {
-+        /* 
-+         * Point the would-be relocated task tables and the buffer descriptors
-+         * to the ones the linker generated
-+         */
-+        if (((u32)MCD_realTaskTableSrc & 0x000001ff) != 0)
-+            return(MCD_TABLE_UNALIGNED);
-+
-+        entryPtr = MCD_realTaskTableSrc;
-+        for (i = 0; i < NCHANNELS; i++)
-+        {
-+            if (((entryPtr[i].varTab & (VAR_TAB_SIZE - 1)) != 0) ||
-+                ((entryPtr[i].FDTandFlags & (FUNCDESC_TAB_SIZE - 1)) != 0))
-+                return(MCD_TABLE_UNALIGNED);
-+        }
-+
-+        MCD_taskTable = MCD_realTaskTableSrc;
-+        MCD_modelTaskTable = MCD_modelTaskTableSrc;
-+        MCD_relocBuffDesc = MCD_singleBufDescs;
-+    }
-+
-+    /* Make all channels inactive, and remember them as such: */
-+    MCD_dmaBar->taskbar = (u32) MCD_taskTable;
-+    for (i = 0;  i < NCHANNELS;  i++)
-+    {
-+        MCD_dmaBar->taskControl[i] = 0x0;
-+        MCD_chStatus[i] = MCD_NO_DMA;
-+    }
-+
-+   /* Set up pausing mechanism to inactive state: */
-+    MCD_dmaBar->debugComp1 = 0;
-+    MCD_dmaBar->debugComp2 = 0;
-+    MCD_dmaBar->debugControl = DBG_CTL_DISABLE;
-+    MCD_dmaBar->debugStatus = DBG_KILL_ALL_STAT;
-+
-+    /* Enable or disable commbus prefetch */
-+    if ((flags & MCD_COMM_PREFETCH_EN) != 0)
-+        MCD_dmaBar->ptdControl &= ~PTD_CTL_COMM_PREFETCH;
-+    else
-+        MCD_dmaBar->ptdControl |= PTD_CTL_COMM_PREFETCH;
-+
-+    return(MCD_OK);
-+}
-+/*********************** End of MCD_initDma() ***********************/
-+
-+/********************************************************************/
-+/* Function:   MCD_dmaStatus
-+ * Purpose:    Returns the status of the DMA on the requested channel
-+ * Arguments:  channel - channel number
-+ * Returns:    Predefined status indicators
-+ */
-+int MCD_dmaStatus (int channel)
-+{
-+    u16 tcrValue;
-+
-+    if((channel < 0) || (channel >= NCHANNELS))
-+        return(MCD_CHANNEL_INVALID);
-+
-+    tcrValue = MCD_dmaBar->taskControl[channel];
-+    if ((tcrValue & TASK_CTL_EN) == 0)
-+    {   /* Nothing running if last reported with task enabled */
-+        if (   MCD_chStatus[channel] == MCD_RUNNING
-+            || MCD_chStatus[channel] == MCD_IDLE)
-+            MCD_chStatus[channel] = MCD_DONE;
-+    }
-+    else /* something is running */
-+    {
-+        /* There are three possibilities: paused, running or idle. */
-+        if (   MCD_chStatus[channel] == MCD_RUNNING
-+            || MCD_chStatus[channel] == MCD_IDLE)
-+        {
-+            MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT;
-+            /* Determine which initiator is asserted. */
-+            if ((MCD_dmaBar->ptdDebug >> channel ) & 0x1 )
-+                MCD_chStatus[channel] = MCD_RUNNING;
-+            else
-+                MCD_chStatus[channel] = MCD_IDLE;
-+            /* Do not change the status if it is already paused */
-+        }
-+    }
-+    return MCD_chStatus[channel];
-+}
-+/******************** End of MCD_dmaStatus() ************************/
-+
-+/********************************************************************/
-+/* Function:    MCD_startDma
-+ * Ppurpose:    Starts a particular kind of DMA
-+ * Arguments:   see below
-+ * Returns:     MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
-+ */
-+
-+int MCD_startDma (
-+    int  channel,   /* the channel on which to run the DMA */
-+    s8   *srcAddr,  /* the address to move data from, or physical buffer-descriptor address */
-+    s16  srcIncr,   /* the amount to increment the source address per transfer */
-+    s8   *destAddr, /* the address to move data to */
-+    s16  destIncr,  /* the amount to increment the destination address per transfer */
-+    u32  dmaSize,   /* the number of bytes to transfer independent of the transfer size */
-+    u32  xferSize,  /* the number bytes in of each data movement (1, 2, or 4) */
-+    u32  initiator, /* what device initiates the DMA */
-+    int  priority,  /* priority of the DMA */
-+    u32  flags,     /* flags describing the DMA */
-+    u32  funcDesc   /* a description of byte swapping, bit swapping, and CRC actions */
-+#ifdef MCD_NEED_ADDR_TRANS
-+    s8   *srcAddrVirt /* virtual buffer descriptor address TBD*/
-+#endif
-+)
-+{
-+    int srcRsdIncr, destRsdIncr;
-+    int *cSave;
-+    short xferSizeIncr;
-+    int tcrCount = 0;
-+#ifdef MCD_INCLUDE_EU
-+    u32 *realFuncArray;
-+#endif
-+
-+    if((channel < 0) || (channel >= NCHANNELS))
-+        return(MCD_CHANNEL_INVALID);
-+
-+#ifndef MCD_INCLUDE_EU
-+    funcDesc = MCD_FUNC_NOEU1;
-+#endif
-+
-+#ifdef MCD_DEBUG
-+printf("startDma:Setting up params\n");
-+#endif
-+
-+   /* Enable task-wise priority */
-+    MCD_dmaBar->ptdControl |= (u16) 0x8000;
-+
-+    /* Calculate additional parameters to the regular DMA calls. */
-+    srcRsdIncr = srcIncr < 0 ? -1 : (srcIncr > 0 ? 1 : 0);
-+    destRsdIncr = destIncr < 0 ? -1 : (destIncr > 0 ? 1 : 0);
-+    xferSizeIncr = (xferSize & 0xffff) | 0x20000000;
-+
-+    /* Remember which variant is running for each channel */
-+    MCD_remVariants.remSrcRsdIncr[channel] = srcRsdIncr;
-+    MCD_remVariants.remDestRsdIncr[channel] = destRsdIncr;
-+    MCD_remVariants.remDestIncr[channel] = destIncr;
-+    MCD_remVariants.remSrcIncr[channel] = srcIncr;
-+    MCD_remVariants.remXferSize[channel] = xferSize;
-+
-+    cSave = (int*)(MCD_taskTable[channel].contextSaveSpace) 
-+            + CSAVE_OFFSET 
-+            + CURRBD;
-+
-+#ifdef MCD_INCLUDE_EU
-+    realFuncArray = (u32 *) (MCD_taskTable[channel].FDTandFlags & 0xffffff00);
-+
-+    /* 
-+     * Modify the LURC's normal and byte-residue-loop functions 
-+     * according to parameter. 
-+     */
-+    switch (xferSize)
-+    {
-+        case 4:
-+            realFuncArray[(LURC*16)] = funcDesc;
-+            break;
-+        case 2:
-+            realFuncArray[(LURC*16)] = funcDesc & 0xfffff00f;
-+            break;
-+        case 1:
-+        default:
-+            realFuncArray[(LURC*16)] = funcDesc & 0xffff000f;
-+            break;
-+    }
-+
-+    realFuncArray[(LURC*16+1)] = 0
-+        | (funcDesc & MCD_BYTE_SWAP_KILLER) 
-+        | MCD_NO_BYTE_SWAP_ATALL;
-+#endif
-+
-+   /* Write the initiator field in the TCR and set the initiator-hold bit*/
-+    MCD_dmaBar->taskControl[channel] = 0
-+        | (initiator << 8)
-+        | TASK_CTL_HIPRITSKEN
-+        | TASK_CTL_HLDINITNUM;
-+
-+    /* 
-+     * Current versions of the MPC8220 MCD have a hardware quirk that could
-+     * cause the write to the TCR to collide with an MDE access to the 
-+     * initiator-register file, so we have to verify that the write occurred
-+     * correctly by reading back the value.  On MCF547x/8x devices and any
-+     * future revisions of the MPC8220, this loop will not be entered.
-+     */
-+    while(((MCD_dmaBar->taskControl[channel] & 0x1fff) !=
-+          ((initiator << 8) | TASK_CTL_HIPRITSKEN | TASK_CTL_HLDINITNUM)) &&
-+            (tcrCount < 1000))
-+    {
-+        tcrCount++;
-+        MCD_dmaBar->taskControl[channel] = 0
-+            | (initiator << 8)
-+            | TASK_CTL_HIPRITSKEN
-+            | TASK_CTL_HLDINITNUM;
-+    }
-+
-+    MCD_dmaBar->priority[channel] = (u8)priority & PRIORITY_PRI_MASK;
-+
-+    if (channel < 8 && channel >= 0)
-+    {
-+        MCD_dmaBar->taskSize0 &= ~(0xf << (7-channel)*4);
-+        MCD_dmaBar->taskSize0 |= (xferSize & 3) << (((7 - channel)*4) + 2);
-+        MCD_dmaBar->taskSize0 |= (xferSize & 3) << ((7 - channel)*4);
-+    }
-+    else
-+    {
-+        MCD_dmaBar->taskSize1 &= ~(0xf << (15-channel)*4);
-+        MCD_dmaBar->taskSize1 |= (xferSize & 3) << (((15 - channel)*4) + 2);
-+        MCD_dmaBar->taskSize1 |= (xferSize & 3) << ((15 - channel)*4);
-+    }
-+
-+    /* Setup task table flags/options */
-+    MCD_taskTable[channel].FDTandFlags &= ~MCD_TT_FLAGS_MASK;
-+    MCD_taskTable[channel].FDTandFlags |= (MCD_TT_FLAGS_MASK & flags);
-+
-+    if (flags & MCD_FECTX_DMA)
-+    {
-+        /* TDTStart and TDTEnd */
-+        MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_FECTX].TDTstart;
-+        MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_FECTX].TDTend;
-+        MCD_startDmaENetXmit(srcAddr, srcAddr, destAddr, MCD_taskTable, channel);
-+    }
-+    else if (flags & MCD_FECRX_DMA)
-+    {
-+        /* TDTStart and TDTEnd */
-+        MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_FECRX].TDTstart;
-+        MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_FECRX].TDTend;
-+        MCD_startDmaENetRcv(srcAddr, srcAddr, destAddr, MCD_taskTable, channel);
-+    }
-+    else if(flags & MCD_SINGLE_DMA)
-+    {
-+        /* 
-+         * This buffer descriptor is used for storing off initial parameters 
-+         * for later progress query calculation and for the DMA to write the 
-+         * resulting checksum. The DMA does not use this to determine how to 
-+         * operate, that info is passed with the init routine
-+         */
-+        MCD_relocBuffDesc[channel].srcAddr = srcAddr;
-+        MCD_relocBuffDesc[channel].destAddr = destAddr;
-+        MCD_relocBuffDesc[channel].lastDestAddr = destAddr;
-+        MCD_relocBuffDesc[channel].dmaSize = dmaSize;
-+        MCD_relocBuffDesc[channel].flags = 0;       /* not used */
-+        MCD_relocBuffDesc[channel].csumResult = 0;  /* not used */
-+        MCD_relocBuffDesc[channel].next = 0;        /* not used */
-+
-+        /* Initialize the progress-querying stuff to show no progress:*/
-+        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET] 
-+            = (int)srcAddr;
-+        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET] 
-+            = (int)destAddr;
-+        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET] 
-+            = 0;
-+        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET] 
-+            = (u32) &(MCD_relocBuffDesc[channel]);
-+
-+        if( funcDesc == MCD_FUNC_NOEU1 || funcDesc == MCD_FUNC_NOEU2)
-+        {
-+            /* TDTStart and TDTEnd */
-+            MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_SINGLENOEU].TDTstart;
-+            MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_SINGLENOEU].TDTend;
-+            MCD_startDmaSingleNoEu(srcAddr, srcIncr, destAddr, destIncr, dmaSize,
-+                                xferSizeIncr, flags, (int *)&(MCD_relocBuffDesc[channel]), 
-+                                cSave, MCD_taskTable, channel);
-+        }
-+        else
-+        {
-+            /* TDTStart and TDTEnd */
-+            MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_SINGLEEU].TDTstart;
-+            MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_SINGLEEU].TDTend;
-+            MCD_startDmaSingleEu(srcAddr, srcIncr, destAddr, destIncr, dmaSize,
-+                                xferSizeIncr, flags, (int *)&(MCD_relocBuffDesc[channel]), 
-+                                cSave, MCD_taskTable, channel);
-+        }
-+    }
-+    else /* Chained DMA */
-+    {
-+        /* Initialize the progress-querying stuff to show no progress:*/
-+#if 1 /* (!defined(MCD_NEED_ADDR_TRANS)) */
-+        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET]
-+            = (int)((MCD_bufDesc*) srcAddr)->srcAddr;
-+        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET]
-+            = (int)((MCD_bufDesc*) srcAddr)->destAddr;
-+#else /* if using address translation, need the virtual addr of the first buffdesc */
-+        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET]
-+          = (int)((MCD_bufDesc*) srcAddrVirt)->srcAddr;
-+        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET]
-+          = (int)((MCD_bufDesc*) srcAddrVirt)->destAddr;
-+#endif
-+        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET] 
-+          = 0;
-+        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET] 
-+          = (u32) srcAddr;
-+
-+        if( funcDesc == MCD_FUNC_NOEU1 || funcDesc == MCD_FUNC_NOEU2)
-+        {
-+            /* TDTStart and TDTEnd */
-+            MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_CHAINNOEU].TDTstart;
-+            MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_CHAINNOEU].TDTend;
-+            MCD_startDmaChainNoEu((int *)srcAddr, srcIncr, destIncr, xferSize,
-+                                    xferSizeIncr, cSave, MCD_taskTable, channel);
-+        }
-+        else
-+        {
-+            /* TDTStart and TDTEnd */
-+            MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_CHAINEU].TDTstart;
-+            MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_CHAINEU].TDTend;
-+            MCD_startDmaChainEu((int *)srcAddr, srcIncr, destIncr, xferSize,
-+                                 xferSizeIncr, cSave, MCD_taskTable, channel);
-+        }
-+    }
-+
-+    MCD_chStatus[channel] = MCD_IDLE;
-+    return(MCD_OK);
-+}
-+
-+/************************ End of MCD_startDma() *********************/
-+
-+/********************************************************************/
-+/* Function:    MCD_XferProgrQuery
-+ * Purpose:     Returns progress of DMA on requested channel
-+ * Arguments:   channel - channel to retrieve progress for
-+ *              progRep - pointer to user supplied MCD_XferProg struct
-+ * Returns:     MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
-+ *
-+ * Notes:
-+ *  MCD_XferProgrQuery() upon completing or after aborting a DMA, or
-+ *  while the DMA is in progress, this function returns the first
-+ *  DMA-destination address not (or not yet) used in the DMA. When
-+ *  encountering a non-ready buffer descriptor, the information for
-+ *  the last completed descriptor is returned.
-+ *
-+ *  MCD_XferProgQuery() has to avoid the possibility of getting
-+ *  partially-updated information in the event that we should happen
-+ *  to query DMA progress just as the DMA is updating it. It does that
-+ *  by taking advantage of the fact context is not saved frequently for
-+ *  the most part. We therefore read it at least twice until we get the
-+ *  same information twice in a row.
-+ *
-+ *  Because a small, but not insignificant, amount of time is required
-+ *  to write out the progress-query information, especially upon
-+ *  completion of the DMA, it would be wise to guarantee some time lag
-+ *  between successive readings of the progress-query information.
-+ */
-+
-+/*
-+ * How many iterations of the loop below to execute to stabilize values
-+ */
-+#define STABTIME 0
-+
-+int MCD_XferProgrQuery (int channel, MCD_XferProg *progRep)
-+{
-+    MCD_XferProg prevRep;
-+    int again;  /* true if we are to try again to get consistent results */
-+    int i;  /* used as a time-waste counter */
-+    int destDiffBytes; /* Total number of bytes that we think actually got xfered. */
-+    int numIterations; /* number of iterations */
-+    int bytesNotXfered; /* bytes that did not get xfered. */
-+    s8 *LWAlignedInitDestAddr, *LWAlignedCurrDestAddr;
-+    int subModVal, addModVal; /* Mode values to added and subtracted from the
-+                                final destAddr */
-+
-+    if((channel < 0) || (channel >= NCHANNELS))
-+        return(MCD_CHANNEL_INVALID);
-+
-+    /* Read a trial value for the progress-reporting values*/
-+    prevRep.lastSrcAddr =
-+          (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET];
-+    prevRep.lastDestAddr =
-+          (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET];
-+    prevRep.dmaSize = ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET];
-+    prevRep.currBufDesc =
-+          (MCD_bufDesc*) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET];
-+
-+    /* Repeatedly reread those values until they match previous values: */
-+    do {
-+        /* Take a little bit of time to ensure stability: */
-+        for (i = 0;  i < STABTIME;  i++)
-+            i += i >> 2;  /* make sure this loop does something so that it 
-+                             doesn't get optimized out */
-+        /* Check them again: */
-+        progRep->lastSrcAddr =
-+            (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET];
-+        progRep->lastDestAddr =
-+            (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET];
-+        progRep->dmaSize = ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET];
-+        progRep->currBufDesc =
-+            (MCD_bufDesc*) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET];
-+
-+        /* See if they match: */
-+        if (   prevRep.lastSrcAddr  != progRep->lastSrcAddr
-+            || prevRep.lastDestAddr != progRep->lastDestAddr
-+            || prevRep.dmaSize      != progRep->dmaSize
-+            || prevRep.currBufDesc  != progRep->currBufDesc)
-+        {
-+            /* If they don't match, remember previous values and try again:*/
-+            prevRep.lastSrcAddr = progRep->lastSrcAddr;
-+            prevRep.lastDestAddr = progRep->lastDestAddr;
-+            prevRep.dmaSize = progRep->dmaSize;
-+            prevRep.currBufDesc = progRep->currBufDesc;
-+            again = MCD_TRUE;
-+        }
-+        else
-+          again = MCD_FALSE;
-+    } while (again == MCD_TRUE);
-+
-+
-+    /* Update dmaSize and lastDestAddr */
-+    switch(MCD_remVariants.remDestRsdIncr[channel]) 
-+    {
-+        case MINUS1:
-+           subModVal = ((int)progRep->lastDestAddr) 
-+                        & ((MCD_remVariants.remXferSize[channel]) - 1);
-+           addModVal = ((int)progRep->currBufDesc->destAddr) 
-+                        & ((MCD_remVariants.remXferSize[channel]) - 1);
-+           LWAlignedInitDestAddr = (progRep->currBufDesc->destAddr) - addModVal;
-+           LWAlignedCurrDestAddr = (progRep->lastDestAddr) - subModVal;
-+           destDiffBytes = LWAlignedInitDestAddr - LWAlignedCurrDestAddr;
-+           bytesNotXfered = (destDiffBytes/MCD_remVariants.remDestIncr[channel]) *
-+                            ( MCD_remVariants.remDestIncr[channel]
-+                            + MCD_remVariants.remXferSize[channel]);
-+           progRep->dmaSize = destDiffBytes - bytesNotXfered + addModVal - subModVal;
-+           break;
-+        case ZERO:
-+           progRep->lastDestAddr = progRep->currBufDesc->destAddr;
-+           break;
-+        case PLUS1:
-+           /* This value has to be subtracted from the final calculated dmaSize. */
-+            subModVal = ((int)progRep->currBufDesc->destAddr) 
-+                        & ((MCD_remVariants.remXferSize[channel]) - 1);
-+           /* These bytes are already in lastDestAddr. */
-+            addModVal = ((int)progRep->lastDestAddr) 
-+                        & ((MCD_remVariants.remXferSize[channel]) - 1);
-+            LWAlignedInitDestAddr = (progRep->currBufDesc->destAddr) - subModVal;
-+            LWAlignedCurrDestAddr = (progRep->lastDestAddr) - addModVal;
-+            destDiffBytes = (progRep->lastDestAddr - LWAlignedInitDestAddr);
-+            numIterations = ( LWAlignedCurrDestAddr - LWAlignedInitDestAddr)/MCD_remVariants.remDestIncr[channel];
-+            bytesNotXfered =  numIterations *
-+                              (MCD_remVariants.remDestIncr[channel]
-+                             - MCD_remVariants.remXferSize[channel]);
-+            progRep->dmaSize = destDiffBytes - bytesNotXfered - subModVal;
-+            break;
-+        default:
-+            break;
-+    }
-+
-+    /* This covers M1,P1,Z for source */
-+    switch(MCD_remVariants.remSrcRsdIncr[channel]) 
-+    {
-+        case MINUS1:
-+            progRep->lastSrcAddr =
-+                progRep->currBufDesc->srcAddr +
-+                 ( MCD_remVariants.remSrcIncr[channel] *
-+                   (progRep->dmaSize/MCD_remVariants.remXferSize[channel]));
-+            break;
-+        case ZERO:
-+            progRep->lastSrcAddr = progRep->currBufDesc->srcAddr;
-+            break;
-+        case PLUS1:
-+            progRep->lastSrcAddr =
-+                progRep->currBufDesc->srcAddr +
-+                 ( MCD_remVariants.remSrcIncr[channel] *
-+                   (progRep->dmaSize/MCD_remVariants.remXferSize[channel]));
-+            break;
-+        default: 
-+            break;
-+    }
-+
-+    return(MCD_OK);
-+}
-+/******************* End of MCD_XferProgrQuery() ********************/
-+
-+/********************************************************************/
-+/* MCD_resmActions() does the majority of the actions of a DMA resume.
-+ * It is called from MCD_killDma() and MCD_resumeDma().  It has to be
-+ * a separate function because the kill function has to negate the task
-+ * enable before resuming it, but the resume function has to do nothing
-+ * if there is no DMA on that channel (i.e., if the enable bit is 0).
-+ */
-+static void MCD_resmActions (int channel)
-+{
-+   MCD_dmaBar->debugControl = DBG_CTL_DISABLE;
-+   MCD_dmaBar->debugStatus = MCD_dmaBar->debugStatus;
-+
-+   /* Determine which initiators are asserted */
-+   MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT; 
-+
-+   if((MCD_dmaBar->ptdDebug >> channel ) & 0x1)
-+       MCD_chStatus[channel] = MCD_RUNNING;
-+   else
-+       MCD_chStatus[channel] = MCD_IDLE;
-+}
-+/********************* End of MCD_resmActions() *********************/
-+
-+/********************************************************************/
-+/* Function:    MCD_killDma
-+ * Purpose:     Halt the DMA on the requested channel, without any
-+ *              intention of resuming the DMA.
-+ * Arguments:   channel - requested channel
-+ * Returns:     MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
-+ *
-+ * Notes:
-+ *  A DMA may be killed from any state, including paused state, and it
-+ *  always goes to the MCD_HALTED state even if it is killed while in
-+ *  the MCD_NO_DMA or MCD_IDLE states.
-+ */
-+int MCD_killDma (int channel)
-+{
-+    if((channel < 0) || (channel >= NCHANNELS))
-+        return(MCD_CHANNEL_INVALID);
-+
-+    MCD_dmaBar->taskControl[channel] = 0x0;
-+    
-+    /* Clean up after a paused task */
-+    if (MCD_chStatus[channel] == MCD_PAUSED)
-+    {
-+        MCD_dmaBar->debugControl = DBG_CTL_DISABLE;
-+        MCD_dmaBar->debugStatus = MCD_dmaBar->debugStatus;        
-+    }
-+     
-+    MCD_chStatus[channel] = MCD_HALTED;
-+
-+    return(MCD_OK);
-+}
-+/************************ End of MCD_killDma() **********************/
-+
-+/********************************************************************/
-+/* Function:    MCD_continDma
-+ * Purpose:     Continue a DMA which as stopped due to encountering an
-+ *              unready buffer descriptor.
-+ * Arguments:   channel - channel to continue the DMA on
-+ * Returns:     MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
-+ *
-+ * Notes:
-+ *  This routine does not check to see if there is a task which can
-+ *  be continued. Also this routine should not be used with single DMAs.
-+ */
-+int MCD_continDma (int channel)
-+{
-+    if((channel < 0) || (channel >= NCHANNELS))
-+        return(MCD_CHANNEL_INVALID);
-+
-+    MCD_dmaBar->taskControl[channel] |= TASK_CTL_EN;
-+    MCD_chStatus[channel] = MCD_RUNNING;
-+
-+    return(MCD_OK);
-+}
-+/********************** End of MCD_continDma() **********************/
-+
-+/*********************************************************************
-+ * MCD_pauseDma() and MCD_resumeDma() below use the DMA's debug unit
-+ * to freeze a task and resume it.  We freeze a task by breakpointing
-+ * on the stated task.  That is, not any specific place in the task,
-+ * but any time that task executes.  In particular, when that task
-+ * executes, we want to freeze that task and only that task.
-+ *
-+ * The bits of the debug control register influence interrupts vs.
-+ * breakpoints as follows:
-+ * - Bits 14 and 0 enable or disable debug functions.  If enabled, you
-+ *   will get the interrupt but you may or may not get a breakpoint.
-+ * - Bits 2 and 1 decide whether you also get a breakpoint in addition
-+ *   to an interrupt.
-+ *
-+ * The debug unit can do these actions in response to either internally
-+ * detected breakpoint conditions from the comparators, or in response
-+ * to the external breakpoint pin, or both.
-+ * - Bits 14 and 1 perform the above-described functions for
-+ *   internally-generated conditions, i.e., the debug comparators.
-+ * - Bits 0 and 2 perform the above-described functions for external
-+ *   conditions, i.e., the breakpoint external pin.
-+ *
-+ * Note that, although you "always" get the interrupt when you turn
-+ * the debug functions, the interrupt can nevertheless, if desired, be
-+ * masked by the corresponding bit in the PTD's IMR. Note also that
-+ * this means that bits 14 and 0 must enable debug functions before
-+ * bits 1 and 2, respectively, have any effect.
-+ *
-+ * NOTE: It's extremely important to not pause more than one DMA channel
-+ *  at a time.
-+ ********************************************************************/
-+
-+/********************************************************************/
-+/* Function:    MCD_pauseDma
-+ * Purpose:     Pauses the DMA on a given channel (if any DMA is running
-+ *              on that channel).
-+ * Arguments:   channel
-+ * Returns:     MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
-+ */
-+int MCD_pauseDma (int channel)
-+{
-+    if((channel < 0) || (channel >= NCHANNELS))
-+        return(MCD_CHANNEL_INVALID);
-+
-+    if (MCD_dmaBar->taskControl[channel] & TASK_CTL_EN)
-+    {
-+        MCD_dmaBar->debugComp1 = channel;
-+        MCD_dmaBar->debugControl = DBG_CTL_ENABLE | (1 << (channel + 16));
-+        MCD_chStatus[channel] = MCD_PAUSED;
-+    }
-+    return(MCD_OK);
-+}
-+/************************* End of MCD_pauseDma() ********************/
-+
-+/********************************************************************/
-+/* Function:    MCD_resumeDma
-+ * Purpose:     Resumes the DMA on a given channel (if any DMA is
-+ *              running on that channel).
-+ * Arguments:   channel - channel on which to resume DMA
-+ * Returns:     MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
-+ */
-+int MCD_resumeDma (int channel)
-+{
-+    if((channel < 0) || (channel >= NCHANNELS))
-+        return(MCD_CHANNEL_INVALID);
-+
-+    if (MCD_dmaBar->taskControl[channel] & TASK_CTL_EN)
-+        MCD_resmActions (channel);
-+
-+    return(MCD_OK);
-+}
-+/************************ End of MCD_resumeDma() ********************/
-+
-+/********************************************************************/
-+/* Function:    MCD_csumQuery
-+ * Purpose:     Provide the checksum after performing a non-chained DMA
-+ * Arguments:   channel - channel to report on
-+ *              csum - pointer to where to write the checksum/CRC
-+ * Returns:     MCD_ERROR if the channel is invalid, else MCD_OK
-+ *
-+ * Notes:
-+ *
-+ */
-+int MCD_csumQuery (int channel, u32 *csum)
-+{
-+#ifdef MCD_INCLUDE_EU
-+    if((channel < 0) || (channel >= NCHANNELS))
-+        return(MCD_CHANNEL_INVALID);
-+
-+    *csum = MCD_relocBuffDesc[channel].csumResult;
-+    return(MCD_OK);
-+#else
-+    return(MCD_ERROR);
-+#endif
-+}
-+/*********************** End of MCD_resumeDma() *********************/
-+
-+/********************************************************************/
-+/* Function:    MCD_getCodeSize
-+ * Purpose:     Provide the size requirements of the microcoded tasks
-+ * Returns:     Size in bytes
-+ */
-+int MCD_getCodeSize(void)
-+{
-+#ifdef MCD_INCLUDE_EU
-+    return(0x2b64);
-+#else
-+    return(0x1744);
-+#endif
-+}
-+/********************** End of MCD_getCodeSize() ********************/
-+
-+/********************************************************************/
-+/* Function:    MCD_getVersion
-+ * Purpose:     Provide the version string and number
-+ * Arguments:   longVersion - user supplied pointer to a pointer to a char
-+ *                    which points to the version string
-+ * Returns:     Version number and version string (by reference)
-+ */
-+char MCD_versionString[] = "Multi-channel DMA API v1.0";
-+#define MCD_REV_MAJOR   0x01
-+#define MCD_REV_MINOR   0x00
-+
-+int MCD_getVersion(char **longVersion)
-+{
-+    *longVersion = MCD_versionString;
-+    return((MCD_REV_MAJOR << 8) | MCD_REV_MINOR);
-+}
-+/********************** End of MCD_getVersion() *********************/
-+
-+/********************************************************************/
-+/* Private version of memcpy()
-+ * Note that everything this is used for is longword-aligned.
-+ */
-+static void MCD_memcpy (int *dest, int *src, u32 size)
-+{
-+    u32 i;
-+
-+    for (i = 0;  i < size;  i += sizeof(int), dest++, src++)
-+        *dest = *src;
-+}
-+/********************************************************************/
---- /dev/null
-+++ b/drivers/dma/MCD_dma.h
-@@ -0,0 +1,378 @@
-+/*
-+ * drivers/dma/MCD_dma.h
-+ *
-+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
-+ *     Kurt Mahan <kmahan@freescale.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef _MCD_API_H
-+#define _MCD_API_H
-+
-+/*
-+ * Turn Execution Unit tasks ON (#define) or OFF (#undef)
-+ */
-+#undef MCD_INCLUDE_EU
-+
-+/*
-+ * Number of DMA channels
-+ */
-+#define NCHANNELS 16
-+
-+/*
-+ * Total number of variants
-+ */
-+#ifdef MCD_INCLUDE_EU
-+#define NUMOFVARIANTS   6
-+#else
-+#define NUMOFVARIANTS   4
-+#endif
-+
-+/*
-+ * Define sizes of the various tables
-+ */
-+#define TASK_TABLE_SIZE     (NCHANNELS*32)
-+#define VAR_TAB_SIZE        (128)
-+#define CONTEXT_SAVE_SIZE   (128)
-+#define FUNCDESC_TAB_SIZE   (256)
-+
-+#ifdef MCD_INCLUDE_EU
-+#define FUNCDESC_TAB_NUM    16
-+#else
-+#define FUNCDESC_TAB_NUM    1
-+#endif
-+
-+
-+#ifndef DEFINESONLY
-+
-+/*
-+ * Portability typedefs
-+ */
-+typedef int s32;
-+typedef unsigned int u32;
-+typedef short s16;
-+typedef unsigned short u16;
-+typedef char s8;
-+typedef unsigned char u8;
-+
-+/*
-+ * These structures represent the internal registers of the
-+ * multi-channel DMA
-+ */
-+struct dmaRegs_s {
-+   u32 taskbar;         /* task table base address register */
-+   u32 currPtr;
-+   u32 endPtr;
-+   u32 varTablePtr;
-+   u16 dma_rsvd0;
-+   u16 ptdControl;      /* ptd control */
-+   u32 intPending;      /* interrupt pending register */
-+   u32 intMask;         /* interrupt mask register */
-+   u16 taskControl[16]; /* task control registers */
-+   u8  priority[32];    /* priority registers */
-+   u32 initiatorMux;    /* initiator mux control */
-+   u32 taskSize0;       /* task size control register 0. */
-+   u32 taskSize1;       /* task size control register 1. */
-+   u32 dma_rsvd1;       /* reserved */
-+   u32 dma_rsvd2;       /* reserved */
-+   u32 debugComp1;      /* debug comparator 1 */
-+   u32 debugComp2;      /* debug comparator 2 */
-+   u32 debugControl;    /* debug control */
-+   u32 debugStatus;     /* debug status */
-+   u32 ptdDebug;        /* priority task decode debug */
-+   u32 dma_rsvd3[31];   /* reserved */
-+};
-+typedef volatile struct dmaRegs_s dmaRegs;
-+
-+#endif
-+
-+/*
-+ * PTD contrl reg bits
-+ */
-+#define PTD_CTL_TSK_PRI         0x8000
-+#define PTD_CTL_COMM_PREFETCH   0x0001
-+
-+/*
-+ * Task Control reg bits and field masks
-+ */
-+#define TASK_CTL_EN             0x8000
-+#define TASK_CTL_VALID          0x4000
-+#define TASK_CTL_ALWAYS         0x2000
-+#define TASK_CTL_INIT_MASK      0x1f00
-+#define TASK_CTL_ASTRT          0x0080
-+#define TASK_CTL_HIPRITSKEN     0x0040
-+#define TASK_CTL_HLDINITNUM     0x0020
-+#define TASK_CTL_ASTSKNUM_MASK  0x000f
-+
-+/*
-+ * Priority reg bits and field masks
-+ */
-+#define PRIORITY_HLD            0x80
-+#define PRIORITY_PRI_MASK       0x07
-+
-+/*
-+ * Debug Control reg bits and field masks
-+ */
-+#define DBG_CTL_BLOCK_TASKS_MASK    0xffff0000
-+#define DBG_CTL_AUTO_ARM            0x00008000
-+#define DBG_CTL_BREAK               0x00004000
-+#define DBG_CTL_COMP1_TYP_MASK      0x00003800
-+#define DBG_CTL_COMP2_TYP_MASK      0x00000070
-+#define DBG_CTL_EXT_BREAK           0x00000004
-+#define DBG_CTL_INT_BREAK           0x00000002
-+
-+/*
-+ * PTD Debug reg selector addresses
-+ * This reg must be written with a value to show the contents of
-+ * one of the desired internal register.
-+ */
-+#define PTD_DBG_REQ             0x00 /* shows the state of 31 initiators */
-+#define PTD_DBG_TSK_VLD_INIT    0x01 /* shows which 16 tasks are valid and
-+                                        have initiators asserted */
-+
-+
-+/*
-+ * General return values
-+ */
-+#define MCD_OK                   0
-+#define MCD_ERROR               -1
-+#define MCD_TABLE_UNALIGNED     -2
-+#define MCD_CHANNEL_INVALID     -3
-+
-+/*
-+ * MCD_initDma input flags
-+ */
-+#define MCD_RELOC_TASKS         0x00000001
-+#define MCD_NO_RELOC_TASKS      0x00000000
-+#define MCD_COMM_PREFETCH_EN    0x00000002  /* Commbus Prefetching - MCF547x/548x ONLY */
-+
-+/*
-+ * MCD_dmaStatus Status Values for each channel
-+ */
-+#define MCD_NO_DMA  1 /* No DMA has been requested since reset */
-+#define MCD_IDLE    2 /* DMA active, but the initiator is currently inactive */
-+#define MCD_RUNNING 3 /* DMA active, and the initiator is currently active */
-+#define MCD_PAUSED  4 /* DMA active but it is currently paused */
-+#define MCD_HALTED  5 /* the most recent DMA has been killed with MCD_killTask() */
-+#define MCD_DONE    6 /* the most recent DMA has completed. */
-+
-+
-+/*
-+ * MCD_startDma parameter defines
-+ */
-+
-+/*
-+ * Constants for the funcDesc parameter
-+ */
-+/* Byte swapping: */
-+#define MCD_NO_BYTE_SWAP    0x00045670  /* to disable byte swapping. */
-+#define MCD_BYTE_REVERSE    0x00076540  /* to reverse the bytes of each u32 of the DMAed data. */
-+#define MCD_U16_REVERSE     0x00067450  /* to reverse the 16-bit halves of
-+                                           each 32-bit data value being DMAed.*/
-+#define MCD_U16_BYTE_REVERSE    0x00054760 /* to reverse the byte halves of each
-+                                            16-bit half of each 32-bit data value DMAed */
-+#define MCD_NO_BIT_REV  0x00000000  /* do not reverse the bits of each byte DMAed. */
-+#define MCD_BIT_REV     0x00088880  /* reverse the bits of each byte DMAed */
-+/* CRCing: */
-+#define MCD_CRC16       0xc0100000  /* to perform CRC-16 on DMAed data. */
-+#define MCD_CRCCCITT    0xc0200000  /* to perform CRC-CCITT on DMAed data. */
-+#define MCD_CRC32       0xc0300000  /* to perform CRC-32 on DMAed data. */
-+#define MCD_CSUMINET    0xc0400000  /* to perform internet checksums on DMAed data.*/
-+#define MCD_NO_CSUM     0xa0000000  /* to perform no checksumming. */
-+
-+#define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | MCD_NO_CSUM)
-+#define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM)
-+
-+/*
-+ * Constants for the flags parameter
-+ */
-+#define MCD_TT_FLAGS_RL   0x00000001 /* Read line */
-+#define MCD_TT_FLAGS_CW   0x00000002 /* Combine Writes */
-+#define MCD_TT_FLAGS_SP   0x00000004 /* Speculative prefetch(XLB) MCF547x/548x ONLY  */
-+#define MCD_TT_FLAGS_PI   0x00000040 /* Precise Increment */
-+#define MCD_TT_FLAGS_MASK 0x000000ff
-+#define MCD_TT_FLAGS_DEF  (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW)
-+
-+#define MCD_SINGLE_DMA  0x00000100 /* Unchained DMA */
-+#define MCD_CHAIN_DMA              /* TBD */
-+#define MCD_EU_DMA                 /* TBD */
-+#define MCD_FECTX_DMA   0x00001000 /* FEC TX ring DMA */
-+#define MCD_FECRX_DMA   0x00002000 /* FEC RX ring DMA */
-+
-+
-+/* these flags are valid for MCD_startDma and the chained buffer descriptors */
-+#define MCD_BUF_READY   0x80000000 /* indicates that this buffer is now under the DMA's control */
-+#define MCD_WRAP        0x20000000 /* to tell the FEC Dmas to wrap to the first BD */
-+#define MCD_INTERRUPT   0x10000000 /* to generate an interrupt after completion of the DMA. */
-+#define MCD_END_FRAME   0x08000000 /* tell the DMA to end the frame when transferring
-+                                      last byte of data in buffer */
-+#define MCD_CRC_RESTART 0x40000000 /* to empty out the accumulated checksum
-+                                      prior to performing the DMA. */
-+
-+/* Defines for the FEC buffer descriptor control/status word*/
-+#define MCD_FEC_BUF_READY   0x8000
-+#define MCD_FEC_WRAP        0x2000
-+#define MCD_FEC_INTERRUPT   0x1000
-+#define MCD_FEC_END_FRAME   0x0800
-+
-+
-+/*
-+ * Defines for general intuitiveness
-+ */
-+
-+#define MCD_TRUE  1
-+#define MCD_FALSE 0
-+
-+/*
-+ * Three different cases for destination and source.
-+ */
-+#define MINUS1          -1
-+#define ZERO            0
-+#define PLUS1           1
-+
-+#ifndef DEFINESONLY
-+
-+/* Task Table Entry struct*/
-+typedef struct {
-+    u32 TDTstart;   /* task descriptor table start */
-+    u32 TDTend;     /* task descriptor table end */
-+    u32 varTab;     /* variable table start */
-+    u32 FDTandFlags;    /* function descriptor table start and flags */
-+    volatile u32 descAddrAndStatus;
-+    volatile u32 modifiedVarTab;
-+    u32 contextSaveSpace;   /* context save space start */
-+    u32 literalBases;
-+} TaskTableEntry;
-+
-+
-+/* Chained buffer descriptor */
-+typedef volatile struct MCD_bufDesc_struct MCD_bufDesc;
-+struct MCD_bufDesc_struct {
-+   u32 flags;         /* flags describing the DMA */
-+   u32 csumResult;    /* checksum from checksumming performed since last checksum reset */
-+   s8  *srcAddr;      /* the address to move data from */
-+   s8  *destAddr;     /* the address to move data to */
-+   s8  *lastDestAddr; /* the last address written to */
-+   u32 dmaSize;       /* the number of bytes to transfer independent of the transfer size */
-+   MCD_bufDesc *next; /* next buffer descriptor in chain */
-+   u32 info;          /* private information about this descriptor;  DMA does not affect it */
-+};
-+
-+/* Progress Query struct */
-+typedef volatile struct MCD_XferProg_struct {
-+   s8 *lastSrcAddr;         /* the most-recent or last, post-increment source address */
-+   s8 *lastDestAddr;        /* the most-recent or last, post-increment destination address */
-+   u32  dmaSize;            /* the amount of data transferred for the current buffer */
-+   MCD_bufDesc *currBufDesc;/* pointer to the current buffer descriptor being DMAed */
-+} MCD_XferProg;
-+
-+
-+/* FEC buffer descriptor */
-+typedef volatile struct MCD_bufDescFec_struct {
-+    u16 statCtrl;
-+    u16 length;
-+    u32 dataPointer;
-+} MCD_bufDescFec;
-+
-+
-+/*************************************************************************/
-+/*
-+ * API function Prototypes  - see MCD_dmaApi.c for further notes
-+ */
-+
-+/*
-+ * MCD_startDma starts a particular kind of DMA .
-+ */
-+int MCD_startDma (
-+   int channel,   /* the channel on which to run the DMA */
-+   s8  *srcAddr,  /* the address to move data from, or buffer-descriptor address */
-+   s16 srcIncr,   /* the amount to increment the source address per transfer */
-+   s8  *destAddr, /* the address to move data to */
-+   s16 destIncr,  /* the amount to increment the destination address per transfer */
-+   u32 dmaSize,   /* the number of bytes to transfer independent of the transfer size */
-+   u32 xferSize,  /* the number bytes in of each data movement (1, 2, or 4) */
-+   u32 initiator, /* what device initiates the DMA */
-+   int priority,  /* priority of the DMA */
-+   u32 flags,     /* flags describing the DMA */
-+   u32 funcDesc   /* a description of byte swapping, bit swapping, and CRC actions */
-+);
-+
-+/* 
-+ * MCD_initDma() initializes the DMA API by setting up a pointer to the DMA 
-+ * registers, relocating and creating the appropriate task structures, and 
-+ * setting up some global settings
-+ */
-+int MCD_initDma (dmaRegs *sDmaBarAddr, void *taskTableDest, u32 flags);
-+
-+/* 
-+ * MCD_dmaStatus() returns the status of the DMA on the requested channel.
-+ */
-+int MCD_dmaStatus (int channel);
-+
-+/* 
-+ * MCD_XferProgrQuery() returns progress of DMA on requested channel
-+ */
-+int MCD_XferProgrQuery (int channel, MCD_XferProg *progRep);
-+
-+/* 
-+ * MCD_killDma() halts the DMA on the requested channel, without any
-+ * intention of resuming the DMA.
-+ */
-+int MCD_killDma (int channel);
-+
-+/* 
-+ * MCD_continDma() continues a DMA which as stopped due to encountering an
-+ * unready buffer descriptor.
-+ */
-+int MCD_continDma (int channel);
-+
-+/* 
-+ * MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is
-+ * running on that channel). 
-+ */
-+int MCD_pauseDma (int channel);
-+
-+/* 
-+ * MCD_resumeDma() resumes the DMA on a given channel (if any DMA is
-+ * running on that channel).
-+ */
-+int MCD_resumeDma (int channel);
-+
-+/* 
-+ * MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA
-+ */
-+int MCD_csumQuery (int channel, u32 *csum);
-+
-+/* 
-+ * MCD_getCodeSize provides the packed size required by the microcoded task
-+ * and structures.
-+ */
-+int MCD_getCodeSize(void);
-+
-+/*
-+ * MCD_getVersion provides a pointer to a version string and returns a
-+ * version number.
-+ */
-+int MCD_getVersion(char **longVersion);
-+
-+/* macro for setting a location in the variable table */
-+#define MCD_SET_VAR(taskTab,idx,value) ((u32 *)(taskTab)->varTab)[idx] = value
-+   /* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function,
-+      so I'm avoiding surrounding it with "do {} while(0)" */
-+
-+#endif  /* DEFINESONLY */
-+
-+#endif /* _MCD_API_H */
---- /dev/null
-+++ b/drivers/dma/MCD_progCheck.h
-@@ -0,0 +1,28 @@
-+/*
-+ * drivers/dma/MCD_progCheck.h
-+ *
-+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
-+ *     Kurt Mahan <kmahan@freescale.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/* This file is autogenerated. Do not change */
-+
-+#define CURRBD 4
-+#define DCOUNT 6
-+#define DESTPTR 5
-+#define SRCPTR 7
---- /dev/null
-+++ b/drivers/dma/MCD_tasks.c
-@@ -0,0 +1,2465 @@
-+/*
-+ * drivers/dma/MCD_tasks.c
-+ *
-+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
-+ *     Kurt Mahan <kmahan@freescale.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include "MCD_dma.h"
-+
-+u32 MCD_varTab0[];
-+u32 MCD_varTab1[];
-+u32 MCD_varTab2[];
-+u32 MCD_varTab3[];
-+u32 MCD_varTab4[];
-+u32 MCD_varTab5[];
-+u32 MCD_varTab6[];
-+u32 MCD_varTab7[];
-+u32 MCD_varTab8[];
-+u32 MCD_varTab9[];
-+u32 MCD_varTab10[];
-+u32 MCD_varTab11[];
-+u32 MCD_varTab12[];
-+u32 MCD_varTab13[];
-+u32 MCD_varTab14[];
-+u32 MCD_varTab15[];
-+
-+u32 MCD_funcDescTab0[];
-+#ifdef MCD_INCLUDE_EU
-+u32 MCD_funcDescTab1[];
-+u32 MCD_funcDescTab2[];
-+u32 MCD_funcDescTab3[];
-+u32 MCD_funcDescTab4[];
-+u32 MCD_funcDescTab5[];
-+u32 MCD_funcDescTab6[];
-+u32 MCD_funcDescTab7[];
-+u32 MCD_funcDescTab8[];
-+u32 MCD_funcDescTab9[];
-+u32 MCD_funcDescTab10[];
-+u32 MCD_funcDescTab11[];
-+u32 MCD_funcDescTab12[];
-+u32 MCD_funcDescTab13[];
-+u32 MCD_funcDescTab14[];
-+u32 MCD_funcDescTab15[];
-+#endif
-+
-+u32 MCD_contextSave0[];
-+u32 MCD_contextSave1[];
-+u32 MCD_contextSave2[];
-+u32 MCD_contextSave3[];
-+u32 MCD_contextSave4[];
-+u32 MCD_contextSave5[];
-+u32 MCD_contextSave6[];
-+u32 MCD_contextSave7[];
-+u32 MCD_contextSave8[];
-+u32 MCD_contextSave9[];
-+u32 MCD_contextSave10[];
-+u32 MCD_contextSave11[];
-+u32 MCD_contextSave12[];
-+u32 MCD_contextSave13[];
-+u32 MCD_contextSave14[];
-+u32 MCD_contextSave15[];
-+
-+u32 MCD_realTaskTableSrc[] =
-+{
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab0,   /* Task 0 Variable Table */
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave0,  /* Task 0 context save space */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab1,   /* Task 1 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_funcDescTab1,  /* Task 1 Function Descriptor Table & Flags */
-+#else
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave1,  /* Task 1 context save space */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab2,   /* Task 2 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_funcDescTab2,  /* Task 2 Function Descriptor Table & Flags */
-+#else
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave2,  /* Task 2 context save space */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab3,   /* Task 3 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_funcDescTab3,  /* Task 3 Function Descriptor Table & Flags */
-+#else
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave3,  /* Task 3 context save space */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab4,   /* Task 4 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_funcDescTab4,  /* Task 4 Function Descriptor Table & Flags */
-+#else
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave4,  /* Task 4 context save space */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab5,   /* Task 5 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_funcDescTab5,  /* Task 5 Function Descriptor Table & Flags */
-+#else
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave5,  /* Task 5 context save space */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab6,   /* Task 6 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_funcDescTab6,  /* Task 6 Function Descriptor Table & Flags */
-+#else
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave6,  /* Task 6 context save space */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab7,   /* Task 7 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_funcDescTab7,  /* Task 7 Function Descriptor Table & Flags */
-+#else
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave7,  /* Task 7 context save space */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab8,   /* Task 8 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_funcDescTab8,  /* Task 8 Function Descriptor Table & Flags */
-+#else
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave8,  /* Task 8 context save space */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab9,   /* Task 9 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_funcDescTab9,  /* Task 9 Function Descriptor Table & Flags */
-+#else
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave9,  /* Task 9 context save space */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab10,  /* Task 10 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_funcDescTab10, /* Task 10 Function Descriptor Table & Flags */
-+#else
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave10, /* Task 10 context save space */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab11,  /* Task 11 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_funcDescTab11, /* Task 11 Function Descriptor Table & Flags */
-+#else
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave11, /* Task 11 context save space */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab12,  /* Task 12 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_funcDescTab12, /* Task 12 Function Descriptor Table & Flags */
-+#else
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave12, /* Task 12 context save space */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab13,  /* Task 13 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_funcDescTab13, /* Task 13 Function Descriptor Table & Flags */
-+#else
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave13, /* Task 13 context save space */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab14,  /* Task 14 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_funcDescTab14, /* Task 14 Function Descriptor Table & Flags */
-+#else
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave14, /* Task 14 context save space */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_varTab15,  /* Task 15 Variable Table */
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_funcDescTab15, /* Task 15 Function Descriptor Table & Flags */
-+#else
-+    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
-+#endif
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_contextSave15, /* Task 15 context save space */
-+    0x00000000,
-+};
-+
-+
-+u32 MCD_varTab0[] =
-+{   /* Task 0 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+
-+u32 MCD_varTab1[] =
-+{   /* Task 1 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab2[]=
-+{   /* Task 2 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab3[]=
-+{   /* Task 3 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab4[]=
-+{   /* Task 4 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab5[]=
-+{   /* Task 5 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab6[]=
-+{   /* Task 6 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab7[]=
-+{   /* Task 7 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab8[]=
-+{   /* Task 8 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab9[]=
-+{   /* Task 9 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab10[]=
-+{   /* Task 10 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab11[]=
-+{   /* Task 11 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab12[]=
-+{   /* Task 12 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab13[]=
-+{   /* Task 13 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab14[]=
-+{   /* Task 14 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_varTab15[]=
-+{   /* Task 15 Variable Table */
-+    0x00000000, /* var[0] */
-+    0x00000000, /* var[1] */
-+    0x00000000, /* var[2] */
-+    0x00000000, /* var[3] */
-+    0x00000000, /* var[4] */
-+    0x00000000, /* var[5] */
-+    0x00000000, /* var[6] */
-+    0x00000000, /* var[7] */
-+    0x00000000, /* var[8] */
-+    0x00000000, /* var[9] */
-+    0x00000000, /* var[10] */
-+    0x00000000, /* var[11] */
-+    0x00000000, /* var[12] */
-+    0x00000000, /* var[13] */
-+    0x00000000, /* var[14] */
-+    0x00000000, /* var[15] */
-+    0x00000000, /* var[16] */
-+    0x00000000, /* var[17] */
-+    0x00000000, /* var[18] */
-+    0x00000000, /* var[19] */
-+    0x00000000, /* var[20] */
-+    0x00000000, /* var[21] */
-+    0x00000000, /* var[22] */
-+    0x00000000, /* var[23] */
-+    0xe0000000, /* inc[0] */
-+    0x20000000, /* inc[1] */
-+    0x2000ffff, /* inc[2] */
-+    0x00000000, /* inc[3] */
-+    0x00000000, /* inc[4] */
-+    0x00000000, /* inc[5] */
-+    0x00000000, /* inc[6] */
-+    0x00000000, /* inc[7] */
-+};
-+
-+u32 MCD_funcDescTab0[]=
-+{   /* Task 0 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+#ifdef MCD_INCLUDE_EU
-+u32 MCD_funcDescTab1[]=
-+{   /* Task 1 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab2[]=
-+{   /* Task 2 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab3[]=
-+{   /* Task 3 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab4[]=
-+{   /* Task 4 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab5[]=
-+{   /* Task 5 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab6[]=
-+{   /* Task 6 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab7[]=
-+{   /* Task 7 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab8[]=
-+{   /* Task 8 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab9[]=
-+{   /* Task 9 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab10[]=
-+{   /* Task 10 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab11[]=
-+{   /* Task 11 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab12[]=
-+{   /* Task 12 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab13[]=
-+{   /* Task 13 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab14[]=
-+{   /* Task 14 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+
-+u32 MCD_funcDescTab15[]=
-+{   /* Task 15 Function Descriptor Table */
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0xa0045670, /* mainFunc(), EU# 3 */
-+    0xa0000000, /* rsduFunc(), EU# 3 */
-+    0xa0000000, /* crcAccumVal(), EU# 3 */
-+    0x20000000, /* setCrcAccum(), EU# 3 */
-+    0x21800000, /* and(), EU# 3 */
-+    0x21e00000, /* or(), EU# 3 */
-+    0x20400000, /* add(), EU# 3 */
-+    0x20500000, /* sub(), EU# 3 */
-+    0x205a0000, /* andNot(), EU# 3 */
-+    0x20a00000, /* shiftR(), EU# 3 */
-+    0x202fa000, /* andReadyBit(), EU# 3 */
-+    0x202f9000, /* andNotReadyBit(), EU# 3 */
-+    0x202ea000, /* andWrapBit(), EU# 3 */
-+    0x202da000, /* andLastBit(), EU# 3 */
-+    0x202e2000, /* andInterruptBit(), EU# 3 */
-+    0x202f2000, /* andCrcRestartBit(), EU# 3 */
-+};
-+#endif /*MCD_INCLUDE_EU*/
-+
-+u32 MCD_contextSave0[128];  /* Task 0 context save space */
-+u32 MCD_contextSave1[128];  /* Task 1 context save space */
-+u32 MCD_contextSave2[128];  /* Task 2 context save space */
-+u32 MCD_contextSave3[128];  /* Task 3 context save space */
-+u32 MCD_contextSave4[128];  /* Task 4 context save space */
-+u32 MCD_contextSave5[128];  /* Task 5 context save space */
-+u32 MCD_contextSave6[128];  /* Task 6 context save space */
-+u32 MCD_contextSave7[128];  /* Task 7 context save space */
-+u32 MCD_contextSave8[128];  /* Task 8 context save space */
-+u32 MCD_contextSave9[128];  /* Task 9 context save space */
-+u32 MCD_contextSave10[128]; /* Task 10 context save space */
-+u32 MCD_contextSave11[128]; /* Task 11 context save space */
-+u32 MCD_contextSave12[128]; /* Task 12 context save space */
-+u32 MCD_contextSave13[128]; /* Task 13 context save space */
-+u32 MCD_contextSave14[128]; /* Task 14 context save space */
-+u32 MCD_contextSave15[128]; /* Task 15 context save space */
-+
-+u32 MCD_ChainNoEu_TDT[];
-+u32 MCD_SingleNoEu_TDT[];
-+#ifdef MCD_INCLUDE_EU
-+u32 MCD_ChainEu_TDT[];
-+u32 MCD_SingleEu_TDT[];
-+#endif
-+u32 MCD_ENetRcv_TDT[];
-+u32 MCD_ENetXmit_TDT[];
-+
-+u32 MCD_modelTaskTableSrc[]=
-+{
-+    (u32)MCD_ChainNoEu_TDT,
-+    (u32)&((u8*)MCD_ChainNoEu_TDT)[0x0000016c],
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_SingleNoEu_TDT,
-+    (u32)&((u8*)MCD_SingleNoEu_TDT)[0x000000d4],
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+#ifdef MCD_INCLUDE_EU
-+    (u32)MCD_ChainEu_TDT,
-+    (u32)&((u8*)MCD_ChainEu_TDT)[0x000001b4],
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_SingleEu_TDT,
-+    (u32)&((u8*)MCD_SingleEu_TDT)[0x00000124],
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+#endif
-+    (u32)MCD_ENetRcv_TDT,
-+    (u32)&((u8*)MCD_ENetRcv_TDT)[0x000000a4],
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    (u32)MCD_ENetXmit_TDT,
-+    (u32)&((u8*)MCD_ENetXmit_TDT)[0x000000d0],
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+    0x00000000,
-+};
-+u32 MCD_ChainNoEu_TDT[]=
-+{
-+    0x80004000, /* 0000(:370):  LCDEXT: idx0 = 0x00000000; ; */
-+    0x8118801b, /* 0004(:370):  LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */
-+    0xb8c60018, /* 0008(:371):    LCD: idx2 = *(idx1 + var12); idx2 once var0; idx2 += inc3 */
-+    0x10002b10, /* 000C(:372):      DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x7000000d, /* 0010(:373):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
-+    0x018cf89f, /* 0014(:373):      DRD2B1: var6 = EU3(); EU3(idx2)  */
-+    0x6000000a, /* 0018(:374):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
-+    0x080cf89f, /* 001C(:374):      DRD2B1: idx0 = EU3(); EU3(idx2)  */
-+    0x000001f8, /* 0020(:0):    NOP */
-+    0x98180364, /* 0024(:378):  LCD: idx0 = idx0; idx0 == var13; idx0 += inc4 */
-+    0x8118801b, /* 0028(:380):    LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */
-+    0xf8c6001a, /* 002C(:381):      LCDEXT: idx2 = *(idx1 + var12 + 8); idx2 once var0; idx2 += inc3 */
-+    0xb8c6601b, /* 0030(:382):      LCD: idx3 = *(idx1 + var12 + 12); ; idx3 += inc3 */
-+    0x10002710, /* 0034(:384):        DRD1A: var9 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x00000f18, /* 0038(:385):        DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-+    0xb8c6001d, /* 003C(:387):      LCD: idx2 = *(idx1 + var12 + 20); idx2 once var0; idx2 += inc3 */
-+    0x10001310, /* 0040(:388):        DRD1A: var4 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x60000007, /* 0044(:389):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=7 EXT init=0 WS=0 RS=0 */
-+    0x014cf88b, /* 0048(:389):        DRD2B1: var5 = EU3(); EU3(idx2,var11)  */
-+    0x98c6001c, /* 004C(:391):      LCD: idx2 = idx1 + var12 + 4; idx2 once var0; idx2 += inc3 */
-+    0x00000710, /* 0050(:392):        DRD1A: var1 = idx2; FN=0 init=0 WS=0 RS=0 */
-+    0x98c70018, /* 0054(:393):      LCD: idx2 = idx1 + var14; idx2 once var0; idx2 += inc3 */
-+    0x10001f10, /* 0058(:394):        DRD1A: var7 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x0000c818, /* 005C(:395):        DRD1A: *idx2 = var3; FN=0 init=0 WS=0 RS=0 */
-+    0x000001f8, /* 0060(:0):      NOP */
-+    0xc1476018, /* 0064(:399):    LCDEXT: idx1 = var2 + var14; ; idx1 += inc3 */
-+    0xc003231d, /* 0068(:399):    LCDEXT: idx2 = var0, idx3 = var6; idx3 == var12; idx2 += inc3, idx3 += inc5 */
-+    0x811a601b, /* 006C(:400):    LCD: idx4 = var2; ; idx4 += inc3 */
-+    0xc1862102, /* 0070(:403):      LCDEXT: idx5 = var3, idx6 = var12; idx6 < var4; idx5 += inc0, idx6 += inc2 */
-+    0x849be009, /* 0074(:403):      LCD: idx7 = var9; ; idx7 += inc1 */
-+    0x03fed7b8, /* 0078(:406):        DRD1A: *idx7; FN=0 init=31 WS=3 RS=3 */
-+    0xda9b001b, /* 007C(:408):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
-+    0x9b9be01b, /* 0080(:408):      LCD: idx7 = idx7; ; idx7 += inc3 */
-+    0x1000cb20, /* 0084(:409):        DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 0088(:410):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf88f, /* 008C(:410):        DRD2B1: idx2 = EU3(); EU3(idx2,var15)  */
-+    0x1000cb28, /* 0090(:411):        DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 0094(:412):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf88f, /* 0098(:412):        DRD2B1: idx2 = EU3(); EU3(idx2,var15)  */
-+    0x1000cb30, /* 009C(:413):        DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 00A0(:414):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf88f, /* 00A4(:414):        DRD2B1: idx2 = EU3(); EU3(idx2,var15)  */
-+    0x1000cb38, /* 00A8(:415):        DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x0000c728, /* 00AC(:416):        DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */
-+    0x000001f8, /* 00B0(:0):      NOP */
-+    0xc1476018, /* 00B4(:420):    LCDEXT: idx1 = var2 + var14; ; idx1 += inc3 */
-+    0xc003241d, /* 00B8(:420):    LCDEXT: idx2 = var0, idx3 = var6; idx3 == var16; idx2 += inc3, idx3 += inc5 */
-+    0x811a601b, /* 00BC(:421):    LCD: idx4 = var2; ; idx4 += inc3 */
-+    0xda9b001b, /* 00C0(:424):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
-+    0x9b9be01b, /* 00C4(:424):      LCD: idx7 = idx7; ; idx7 += inc3 */
-+    0x0000d3a0, /* 00C8(:425):        DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */
-+    0xc1862102, /* 00CC(:427):      LCDEXT: idx5 = var3, idx6 = var12; idx6 < var4; idx5 += inc0, idx6 += inc2 */
-+    0x849be009, /* 00D0(:427):      LCD: idx7 = var9; ; idx7 += inc1 */
-+    0x0bfed7b8, /* 00D4(:430):        DRD1A: *idx7; FN=0 TFD init=31 WS=3 RS=3 */
-+    0xda9b001b, /* 00D8(:432):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
-+    0x9b9be01b, /* 00DC(:432):      LCD: idx7 = idx7; ; idx7 += inc3 */
-+    0x1000cb20, /* 00E0(:433):        DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 00E4(:434):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf88f, /* 00E8(:434):        DRD2B1: idx2 = EU3(); EU3(idx2,var15)  */
-+    0x1000cb28, /* 00EC(:435):        DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 00F0(:436):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf88f, /* 00F4(:436):        DRD2B1: idx2 = EU3(); EU3(idx2,var15)  */
-+    0x1000cb30, /* 00F8(:437):        DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 00FC(:438):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf88f, /* 0100(:438):        DRD2B1: idx2 = EU3(); EU3(idx2,var15)  */
-+    0x1000cb38, /* 0104(:439):        DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x0000c728, /* 0108(:440):        DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */
-+    0x000001f8, /* 010C(:0):      NOP */
-+    0x8118801b, /* 0110(:444):    LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */
-+    0xd8c60018, /* 0114(:446):      LCDEXT: idx2 = idx1 + var12; idx2 once var0; idx2 += inc3 */
-+    0x98c6601c, /* 0118(:446):      LCD: idx3 = idx1 + var12 + 4; ; idx3 += inc3 */
-+    0x6000000b, /* 011C(:447):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT init=0 WS=0 RS=0 */
-+    0x0c8cfc9f, /* 0120(:447):        DRD2B1: *idx2 = EU3(); EU3(*idx2)  */
-+    0x000001f8, /* 0124(:0):      NOP */
-+    0xa146001e, /* 0128(:450):    LCD: idx1 = *(var2 + var12 + 24); idx1 once var0; idx1 += inc3 */
-+    0x10000b08, /* 012C(:451):      DRD1A: var2 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x10002050, /* 0130(:452):      DRD1A: var8 = var10; FN=0 MORE init=0 WS=0 RS=0 */
-+    0xb8c60018, /* 0134(:453):      LCD: idx2 = *(idx1 + var12); idx2 once var0; idx2 += inc3 */
-+    0x10002b10, /* 0138(:454):        DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x7000000a, /* 013C(:455):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT MORE init=0 WS=0 RS=0 */
-+    0x080cf89f, /* 0140(:455):        DRD2B1: idx0 = EU3(); EU3(idx2)  */
-+    0x6000000d, /* 0144(:456):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */
-+    0x018cf89f, /* 0148(:456):        DRD2B1: var6 = EU3(); EU3(idx2)  */
-+    0x000001f8, /* 014C(:0):      NOP */
-+    0x8618801b, /* 0150(:462):    LCD: idx1 = var12; idx1 once var0; idx1 += inc3 */
-+    0x7000000e, /* 0154(:463):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */
-+    0x084cf21f, /* 0158(:463):      DRD2B1: idx1 = EU3(); EU3(var8)  */
-+    0xd8990336, /* 015C(:464):      LCDEXT: idx2 = idx1; idx2 > var12; idx2 += inc6 */
-+    0x8019801b, /* 0160(:464):      LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */
-+    0x040001f8, /* 0164(:465):        DRD1A: FN=0 INT init=0 WS=0 RS=0 */
-+    0x000001f8, /* 0168(:0):      NOP */
-+    0x000001f8, /* 016C(:0):    NOP */
-+};
-+u32 MCD_SingleNoEu_TDT[]=
-+{
-+    0x8198001b, /* 0000(:657):  LCD: idx0 = var3; idx0 once var0; idx0 += inc3 */
-+    0x7000000d, /* 0004(:658):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
-+    0x080cf81f, /* 0008(:658):    DRD2B1: idx0 = EU3(); EU3(idx0)  */
-+    0x8198801b, /* 000C(:659):    LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */
-+    0x6000000e, /* 0010(:660):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */
-+    0x084cf85f, /* 0014(:660):      DRD2B1: idx1 = EU3(); EU3(idx1)  */
-+    0x000001f8, /* 0018(:0):    NOP */
-+    0x8298001b, /* 001C(:664):  LCD: idx0 = var5; idx0 once var0; idx0 += inc3 */
-+    0x7000000d, /* 0020(:665):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
-+    0x010cf81f, /* 0024(:665):    DRD2B1: var4 = EU3(); EU3(idx0)  */
-+    0x6000000e, /* 0028(:666):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */
-+    0x018cf81f, /* 002C(:666):    DRD2B1: var6 = EU3(); EU3(idx0)  */
-+    0xc202601b, /* 0030(:669):  LCDEXT: idx0 = var4, idx1 = var4; ; idx0 += inc3, idx1 += inc3 */
-+    0xc002221c, /* 0034(:669):  LCDEXT: idx2 = var0, idx3 = var4; idx3 == var8; idx2 += inc3, idx3 += inc4 */
-+    0x809a601b, /* 0038(:670):  LCD: idx4 = var1; ; idx4 += inc3 */
-+    0xc10420c2, /* 003C(:673):    LCDEXT: idx5 = var2, idx6 = var8; idx6 < var3; idx5 += inc0, idx6 += inc2 */
-+    0x839be009, /* 0040(:673):    LCD: idx7 = var7; ; idx7 += inc1 */
-+    0x03fed7b8, /* 0044(:676):      DRD1A: *idx7; FN=0 init=31 WS=3 RS=3 */
-+    0xda9b001b, /* 0048(:678):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
-+    0x9b9be01b, /* 004C(:678):    LCD: idx7 = idx7; ; idx7 += inc3 */
-+    0x70000006, /* 0050(:680):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf889, /* 0054(:680):      DRD2B1: idx2 = EU3(); EU3(idx2,var9)  */
-+    0x1000cb28, /* 0058(:681):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 005C(:682):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf889, /* 0060(:682):      DRD2B1: idx2 = EU3(); EU3(idx2,var9)  */
-+    0x1000cb30, /* 0064(:683):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 0068(:684):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf889, /* 006C(:684):      DRD2B1: idx2 = EU3(); EU3(idx2,var9)  */
-+    0x0000cb38, /* 0070(:685):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
-+    0x000001f8, /* 0074(:0):    NOP */
-+    0xc202601b, /* 0078(:689):  LCDEXT: idx0 = var4, idx1 = var4; ; idx0 += inc3, idx1 += inc3 */
-+    0xc002229c, /* 007C(:689):  LCDEXT: idx2 = var0, idx3 = var4; idx3 == var10; idx2 += inc3, idx3 += inc4 */
-+    0x809a601b, /* 0080(:690):  LCD: idx4 = var1; ; idx4 += inc3 */
-+    0xda9b001b, /* 0084(:693):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
-+    0x9b9be01b, /* 0088(:693):    LCD: idx7 = idx7; ; idx7 += inc3 */
-+    0x0000d3a0, /* 008C(:694):      DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */
-+    0xc10420c2, /* 0090(:696):    LCDEXT: idx5 = var2, idx6 = var8; idx6 < var3; idx5 += inc0, idx6 += inc2 */
-+    0x839be009, /* 0094(:696):    LCD: idx7 = var7; ; idx7 += inc1 */
-+    0x0bfed7b8, /* 0098(:699):      DRD1A: *idx7; FN=0 TFD init=31 WS=3 RS=3 */
-+    0xda9b001b, /* 009C(:701):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
-+    0x9b9be01b, /* 00A0(:701):    LCD: idx7 = idx7; ; idx7 += inc3 */
-+    0x70000006, /* 00A4(:703):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf889, /* 00A8(:703):      DRD2B1: idx2 = EU3(); EU3(idx2,var9)  */
-+    0x1000cb28, /* 00AC(:704):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 00B0(:705):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf889, /* 00B4(:705):      DRD2B1: idx2 = EU3(); EU3(idx2,var9)  */
-+    0x1000cb30, /* 00B8(:706):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 00BC(:707):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf889, /* 00C0(:707):      DRD2B1: idx2 = EU3(); EU3(idx2,var9)  */
-+    0x0000cb38, /* 00C4(:708):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
-+    0x000001f8, /* 00C8(:0):    NOP */
-+    0xc318022d, /* 00CC(:712):  LCDEXT: idx0 = var6; idx0 > var8; idx0 += inc5 */
-+    0x8018801b, /* 00D0(:712):  LCD: idx1 = var0; idx1 once var0; idx1 += inc3 */
-+    0x040001f8, /* 00D4(:713):    DRD1A: FN=0 INT init=0 WS=0 RS=0 */
-+};
-+#ifdef MCD_INCLUDE_EU
-+u32 MCD_ChainEu_TDT[]=
-+{
-+    0x80004000, /* 0000(:947):  LCDEXT: idx0 = 0x00000000; ; */
-+    0x8198801b, /* 0004(:947):  LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */
-+    0xb8c68018, /* 0008(:948):    LCD: idx2 = *(idx1 + var13); idx2 once var0; idx2 += inc3 */
-+    0x10002f10, /* 000C(:949):      DRD1A: var11 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x7000000d, /* 0010(:950):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
-+    0x01ccf89f, /* 0014(:950):      DRD2B1: var7 = EU3(); EU3(idx2)  */
-+    0x6000000a, /* 0018(:951):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
-+    0x080cf89f, /* 001C(:951):      DRD2B1: idx0 = EU3(); EU3(idx2)  */
-+    0x000001f8, /* 0020(:0):    NOP */
-+    0x981803a4, /* 0024(:955):  LCD: idx0 = idx0; idx0 == var14; idx0 += inc4 */
-+    0x8198801b, /* 0028(:957):    LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */
-+    0xf8c6801a, /* 002C(:958):      LCDEXT: idx2 = *(idx1 + var13 + 8); idx2 once var0; idx2 += inc3 */
-+    0xb8c6e01b, /* 0030(:959):      LCD: idx3 = *(idx1 + var13 + 12); ; idx3 += inc3 */
-+    0x10002b10, /* 0034(:961):        DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x00001318, /* 0038(:962):        DRD1A: var4 = idx3; FN=0 init=0 WS=0 RS=0 */
-+    0xb8c6801d, /* 003C(:964):      LCD: idx2 = *(idx1 + var13 + 20); idx2 once var0; idx2 += inc3 */
-+    0x10001710, /* 0040(:965):        DRD1A: var5 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x60000007, /* 0044(:966):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=7 EXT init=0 WS=0 RS=0 */
-+    0x018cf88c, /* 0048(:966):        DRD2B1: var6 = EU3(); EU3(idx2,var12)  */
-+    0x98c6801c, /* 004C(:968):      LCD: idx2 = idx1 + var13 + 4; idx2 once var0; idx2 += inc3 */
-+    0x00000b10, /* 0050(:969):        DRD1A: var2 = idx2; FN=0 init=0 WS=0 RS=0 */
-+    0x98c78018, /* 0054(:970):      LCD: idx2 = idx1 + var15; idx2 once var0; idx2 += inc3 */
-+    0x10002310, /* 0058(:971):        DRD1A: var8 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x0000c820, /* 005C(:972):        DRD1A: *idx2 = var4; FN=0 init=0 WS=0 RS=0 */
-+    0x000001f8, /* 0060(:0):      NOP */
-+    0x8698801b, /* 0064(:976):    LCD: idx1 = var13; idx1 once var0; idx1 += inc3 */
-+    0x7000000f, /* 0068(:977):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=15 EXT MORE init=0 WS=0 RS=0 */
-+    0x084cf2df, /* 006C(:977):      DRD2B1: idx1 = EU3(); EU3(var11)  */
-+    0xd899042d, /* 0070(:978):      LCDEXT: idx2 = idx1; idx2 >= var16; idx2 += inc5 */
-+    0x8019801b, /* 0074(:978):      LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */
-+    0x60000003, /* 0078(:979):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */
-+    0x2cd7c7df, /* 007C(:979):        DRD2B2: EU3(var13)  */
-+    0xd8990364, /* 0080(:980):      LCDEXT: idx2 = idx1; idx2 == var13; idx2 += inc4 */
-+    0x8019801b, /* 0084(:980):      LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */
-+    0x60000003, /* 0088(:981):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */
-+    0x2c17c7df, /* 008C(:981):        DRD2B2: EU3(var1)  */
-+    0x000001f8, /* 0090(:0):      NOP */
-+    0xc1c7e018, /* 0094(:984):    LCDEXT: idx1 = var3 + var15; ; idx1 += inc3 */
-+    0xc003a35e, /* 0098(:984):    LCDEXT: idx2 = var0, idx3 = var7; idx3 == var13; idx2 += inc3, idx3 += inc6 */
-+    0x819a601b, /* 009C(:985):    LCD: idx4 = var3; ; idx4 += inc3 */
-+    0xc206a142, /* 00A0(:988):      LCDEXT: idx5 = var4, idx6 = var13; idx6 < var5; idx5 += inc0, idx6 += inc2 */
-+    0x851be009, /* 00A4(:988):      LCD: idx7 = var10; ; idx7 += inc1 */
-+    0x63fe0000, /* 00A8(:991):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=31 WS=3 RS=3 */
-+    0x0d4cfddf, /* 00AC(:991):        DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
-+    0xda9b001b, /* 00B0(:993):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
-+    0x9b9be01b, /* 00B4(:993):      LCD: idx7 = idx7; ; idx7 += inc3 */
-+    0x70000002, /* 00B8(:994):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
-+    0x004cf81f, /* 00BC(:994):        DRD2B1: var1 = EU3(); EU3(idx0)  */
-+    0x1000cb20, /* 00C0(:995):        DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 00C4(:996):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf891, /* 00C8(:996):        DRD2B1: idx2 = EU3(); EU3(idx2,var17)  */
-+    0x1000cb28, /* 00CC(:997):        DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 00D0(:998):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf891, /* 00D4(:998):        DRD2B1: idx2 = EU3(); EU3(idx2,var17)  */
-+    0x1000cb30, /* 00D8(:999):        DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 00DC(:1000):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf891, /* 00E0(:1000):        DRD2B1: idx2 = EU3(); EU3(idx2,var17)  */
-+    0x1000cb38, /* 00E4(:1001):        DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x0000c728, /* 00E8(:1002):        DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */
-+    0x000001f8, /* 00EC(:0):      NOP */
-+    0xc1c7e018, /* 00F0(:1006):    LCDEXT: idx1 = var3 + var15; ; idx1 += inc3 */
-+    0xc003a49e, /* 00F4(:1006):    LCDEXT: idx2 = var0, idx3 = var7; idx3 == var18; idx2 += inc3, idx3 += inc6 */
-+    0x819a601b, /* 00F8(:1007):    LCD: idx4 = var3; ; idx4 += inc3 */
-+    0xda9b001b, /* 00FC(:1010):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
-+    0x9b9be01b, /* 0100(:1010):      LCD: idx7 = idx7; ; idx7 += inc3 */
-+    0x0000d3a0, /* 0104(:1011):        DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */
-+    0xc206a142, /* 0108(:1013):      LCDEXT: idx5 = var4, idx6 = var13; idx6 < var5; idx5 += inc0, idx6 += inc2 */
-+    0x851be009, /* 010C(:1013):      LCD: idx7 = var10; ; idx7 += inc1 */
-+    0x6bfe0000, /* 0110(:1016):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 TFD EXT init=31 WS=3 RS=3 */
-+    0x0d4cfddf, /* 0114(:1016):        DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
-+    0xda9b001b, /* 0118(:1018):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
-+    0x9b9be01b, /* 011C(:1018):      LCD: idx7 = idx7; ; idx7 += inc3 */
-+    0x70000002, /* 0120(:1019):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
-+    0x004cf81f, /* 0124(:1019):        DRD2B1: var1 = EU3(); EU3(idx0)  */
-+    0x1000cb20, /* 0128(:1020):        DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 012C(:1021):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf891, /* 0130(:1021):        DRD2B1: idx2 = EU3(); EU3(idx2,var17)  */
-+    0x1000cb28, /* 0134(:1022):        DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 0138(:1023):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf891, /* 013C(:1023):        DRD2B1: idx2 = EU3(); EU3(idx2,var17)  */
-+    0x1000cb30, /* 0140(:1024):        DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 0144(:1025):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf891, /* 0148(:1025):        DRD2B1: idx2 = EU3(); EU3(idx2,var17)  */
-+    0x1000cb38, /* 014C(:1026):        DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x0000c728, /* 0150(:1027):        DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */
-+    0x000001f8, /* 0154(:0):      NOP */
-+    0x8198801b, /* 0158(:1031):    LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */
-+    0xd8c68018, /* 015C(:1033):      LCDEXT: idx2 = idx1 + var13; idx2 once var0; idx2 += inc3 */
-+    0x98c6e01c, /* 0160(:1033):      LCD: idx3 = idx1 + var13 + 4; ; idx3 += inc3 */
-+    0x6000000b, /* 0164(:1034):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT init=0 WS=0 RS=0 */
-+    0x0c8cfc9f, /* 0168(:1034):        DRD2B1: *idx2 = EU3(); EU3(*idx2)  */
-+    0x0000cc08, /* 016C(:1035):      DRD1A: *idx3 = var1; FN=0 init=0 WS=0 RS=0 */
-+    0xa1c6801e, /* 0170(:1038):    LCD: idx1 = *(var3 + var13 + 24); idx1 once var0; idx1 += inc3 */
-+    0x10000f08, /* 0174(:1039):      DRD1A: var3 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x10002458, /* 0178(:1040):      DRD1A: var9 = var11; FN=0 MORE init=0 WS=0 RS=0 */
-+    0xb8c68018, /* 017C(:1041):      LCD: idx2 = *(idx1 + var13); idx2 once var0; idx2 += inc3 */
-+    0x10002f10, /* 0180(:1042):        DRD1A: var11 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x7000000a, /* 0184(:1043):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT MORE init=0 WS=0 RS=0 */
-+    0x080cf89f, /* 0188(:1043):        DRD2B1: idx0 = EU3(); EU3(idx2)  */
-+    0x6000000d, /* 018C(:1044):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */
-+    0x01ccf89f, /* 0190(:1044):        DRD2B1: var7 = EU3(); EU3(idx2)  */
-+    0x000001f8, /* 0194(:0):      NOP */
-+    0x8698801b, /* 0198(:1050):    LCD: idx1 = var13; idx1 once var0; idx1 += inc3 */
-+    0x7000000e, /* 019C(:1051):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */
-+    0x084cf25f, /* 01A0(:1051):      DRD2B1: idx1 = EU3(); EU3(var9)  */
-+    0xd899037f, /* 01A4(:1052):      LCDEXT: idx2 = idx1; idx2 > var13; idx2 += inc7 */
-+    0x8019801b, /* 01A8(:1052):      LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */
-+    0x040001f8, /* 01AC(:1053):        DRD1A: FN=0 INT init=0 WS=0 RS=0 */
-+    0x000001f8, /* 01B0(:0):      NOP */
-+    0x000001f8, /* 01B4(:0):    NOP */
-+};
-+u32 MCD_SingleEu_TDT[]=
-+{
-+    0x8218001b, /* 0000(:1248):  LCD: idx0 = var4; idx0 once var0; idx0 += inc3 */
-+    0x7000000d, /* 0004(:1249):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
-+    0x080cf81f, /* 0008(:1249):    DRD2B1: idx0 = EU3(); EU3(idx0)  */
-+    0x8218801b, /* 000C(:1250):    LCD: idx1 = var4; idx1 once var0; idx1 += inc3 */
-+    0x6000000e, /* 0010(:1251):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */
-+    0x084cf85f, /* 0014(:1251):      DRD2B1: idx1 = EU3(); EU3(idx1)  */
-+    0x000001f8, /* 0018(:0):    NOP */
-+    0x8318001b, /* 001C(:1255):  LCD: idx0 = var6; idx0 once var0; idx0 += inc3 */
-+    0x7000000d, /* 0020(:1256):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
-+    0x014cf81f, /* 0024(:1256):    DRD2B1: var5 = EU3(); EU3(idx0)  */
-+    0x6000000e, /* 0028(:1257):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */
-+    0x01ccf81f, /* 002C(:1257):    DRD2B1: var7 = EU3(); EU3(idx0)  */
-+    0x8498001b, /* 0030(:1260):  LCD: idx0 = var9; idx0 once var0; idx0 += inc3 */
-+    0x7000000f, /* 0034(:1261):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=15 EXT MORE init=0 WS=0 RS=0 */
-+    0x080cf19f, /* 0038(:1261):    DRD2B1: idx0 = EU3(); EU3(var6)  */
-+    0xd81882a4, /* 003C(:1262):    LCDEXT: idx1 = idx0; idx1 >= var10; idx1 += inc4 */
-+    0x8019001b, /* 0040(:1262):    LCD: idx2 = var0; idx2 once var0; idx2 += inc3 */
-+    0x60000003, /* 0044(:1263):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */
-+    0x2c97c7df, /* 0048(:1263):      DRD2B2: EU3(var9)  */
-+    0xd818826d, /* 004C(:1264):    LCDEXT: idx1 = idx0; idx1 == var9; idx1 += inc5 */
-+    0x8019001b, /* 0050(:1264):    LCD: idx2 = var0; idx2 once var0; idx2 += inc3 */
-+    0x60000003, /* 0054(:1265):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */
-+    0x2c17c7df, /* 0058(:1265):      DRD2B2: EU3(var1)  */
-+    0x000001f8, /* 005C(:0):    NOP */
-+    0xc282e01b, /* 0060(:1268):  LCDEXT: idx0 = var5, idx1 = var5; ; idx0 += inc3, idx1 += inc3 */
-+    0xc002a25e, /* 0064(:1268):  LCDEXT: idx2 = var0, idx3 = var5; idx3 == var9; idx2 += inc3, idx3 += inc6 */
-+    0x811a601b, /* 0068(:1269):  LCD: idx4 = var2; ; idx4 += inc3 */
-+    0xc184a102, /* 006C(:1272):    LCDEXT: idx5 = var3, idx6 = var9; idx6 < var4; idx5 += inc0, idx6 += inc2 */
-+    0x841be009, /* 0070(:1272):    LCD: idx7 = var8; ; idx7 += inc1 */
-+    0x63fe0000, /* 0074(:1275):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=31 WS=3 RS=3 */
-+    0x0d4cfddf, /* 0078(:1275):      DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
-+    0xda9b001b, /* 007C(:1277):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
-+    0x9b9be01b, /* 0080(:1277):    LCD: idx7 = idx7; ; idx7 += inc3 */
-+    0x70000002, /* 0084(:1279):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
-+    0x004cf99f, /* 0088(:1279):      DRD2B1: var1 = EU3(); EU3(idx6)  */
-+    0x70000006, /* 008C(:1280):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf88b, /* 0090(:1280):      DRD2B1: idx2 = EU3(); EU3(idx2,var11)  */
-+    0x1000cb28, /* 0094(:1281):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 0098(:1282):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf88b, /* 009C(:1282):      DRD2B1: idx2 = EU3(); EU3(idx2,var11)  */
-+    0x1000cb30, /* 00A0(:1283):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 00A4(:1284):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf88b, /* 00A8(:1284):      DRD2B1: idx2 = EU3(); EU3(idx2,var11)  */
-+    0x0000cb38, /* 00AC(:1285):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
-+    0x000001f8, /* 00B0(:0):    NOP */
-+    0xc282e01b, /* 00B4(:1289):  LCDEXT: idx0 = var5, idx1 = var5; ; idx0 += inc3, idx1 += inc3 */
-+    0xc002a31e, /* 00B8(:1289):  LCDEXT: idx2 = var0, idx3 = var5; idx3 == var12; idx2 += inc3, idx3 += inc6 */
-+    0x811a601b, /* 00BC(:1290):  LCD: idx4 = var2; ; idx4 += inc3 */
-+    0xda9b001b, /* 00C0(:1293):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
-+    0x9b9be01b, /* 00C4(:1293):    LCD: idx7 = idx7; ; idx7 += inc3 */
-+    0x0000d3a0, /* 00C8(:1294):      DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */
-+    0xc184a102, /* 00CC(:1296):    LCDEXT: idx5 = var3, idx6 = var9; idx6 < var4; idx5 += inc0, idx6 += inc2 */
-+    0x841be009, /* 00D0(:1296):    LCD: idx7 = var8; ; idx7 += inc1 */
-+    0x6bfe0000, /* 00D4(:1299):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 TFD EXT init=31 WS=3 RS=3 */
-+    0x0d4cfddf, /* 00D8(:1299):      DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
-+    0xda9b001b, /* 00DC(:1301):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
-+    0x9b9be01b, /* 00E0(:1301):    LCD: idx7 = idx7; ; idx7 += inc3 */
-+    0x70000002, /* 00E4(:1303):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
-+    0x004cf99f, /* 00E8(:1303):      DRD2B1: var1 = EU3(); EU3(idx6)  */
-+    0x70000006, /* 00EC(:1304):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf88b, /* 00F0(:1304):      DRD2B1: idx2 = EU3(); EU3(idx2,var11)  */
-+    0x1000cb28, /* 00F4(:1305):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 00F8(:1306):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf88b, /* 00FC(:1306):      DRD2B1: idx2 = EU3(); EU3(idx2,var11)  */
-+    0x1000cb30, /* 0100(:1307):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x70000006, /* 0104(:1308):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
-+    0x088cf88b, /* 0108(:1308):      DRD2B1: idx2 = EU3(); EU3(idx2,var11)  */
-+    0x0000cb38, /* 010C(:1309):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
-+    0x000001f8, /* 0110(:0):    NOP */
-+    0x8144801c, /* 0114(:1312):  LCD: idx0 = var2 + var9 + 4; idx0 once var0; idx0 += inc3 */
-+    0x0000c008, /* 0118(:1313):    DRD1A: *idx0 = var1; FN=0 init=0 WS=0 RS=0 */
-+    0xc398027f, /* 011C(:1315):  LCDEXT: idx0 = var7; idx0 > var9; idx0 += inc7 */
-+    0x8018801b, /* 0120(:1315):  LCD: idx1 = var0; idx1 once var0; idx1 += inc3 */
-+    0x040001f8, /* 0124(:1316):    DRD1A: FN=0 INT init=0 WS=0 RS=0 */
-+};
-+#endif
-+u32 MCD_ENetRcv_TDT[]=
-+{
-+    0x80004000, /* 0000(:1389):  LCDEXT: idx0 = 0x00000000; ; */
-+    0x81988000, /* 0004(:1389):  LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-+    0x10000788, /* 0008(:1390):    DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x6000000a, /* 000C(:1391):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
-+    0x080cf05f, /* 0010(:1391):    DRD2B1: idx0 = EU3(); EU3(var1)  */
-+    0x98180209, /* 0014(:1394):  LCD: idx0 = idx0; idx0 != var8; idx0 += inc1 */
-+    0x81c40004, /* 0018(:1396):    LCD: idx1 = var3 + var8 + 4; idx1 once var0; idx1 += inc0 */
-+    0x7000000e, /* 001C(:1397):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */
-+    0x010cf05f, /* 0020(:1397):      DRD2B1: var4 = EU3(); EU3(var1)  */
-+    0x7000000c, /* 0024(:1398):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
-+    0x01ccf05f, /* 0028(:1398):      DRD2B1: var7 = EU3(); EU3(var1)  */
-+    0x70000004, /* 002C(:1399):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */
-+    0x014cf049, /* 0030(:1399):      DRD2B1: var5 = EU3(); EU3(var1,var9)  */
-+    0x70000004, /* 0034(:1400):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */
-+    0x004cf04a, /* 0038(:1400):      DRD2B1: var1 = EU3(); EU3(var1,var10)  */
-+    0x00000b88, /* 003C(:1403):      DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */
-+    0xc4030150, /* 0040(:1406):    LCDEXT: idx1 = var8, idx2 = var6; idx1 < var5; idx1 += inc2, idx2 += inc0 */
-+    0x8119e012, /* 0044(:1406):    LCD: idx3 = var2; ; idx3 += inc2 */
-+    0x03e0cf90, /* 0048(:1409):      DRD1A: *idx3 = *idx2; FN=0 init=31 WS=0 RS=0 */
-+    0x81188000, /* 004C(:1412):    LCD: idx1 = var2; idx1 once var0; idx1 += inc0 */
-+    0x000ac788, /* 0050(:1413):      DRD1A: *idx1 = *idx1; FN=0 init=0 WS=1 RS=1 */
-+    0xc4030000, /* 0054(:1415):    LCDEXT: idx1 = var8, idx2 = var6; idx1 once var0; idx1 += inc0, idx2 += inc0 */
-+    0x8199e000, /* 0058(:1415):    LCD: idx3 = var3; ; idx3 += inc0 */
-+    0x63e00004, /* 005C(:1418):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT init=31 WS=0 RS=0 */
-+    0x084cfc8b, /* 0060(:1418):      DRD2B1: idx1 = EU3(); EU3(*idx2,var11)  */
-+    0xd8990000, /* 0064(:1421):    LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */
-+    0x9999e000, /* 0068(:1421):    LCD: idx3 = idx3; ; idx3 += inc0 */
-+    0x60000005, /* 006C(:1422):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */
-+    0x0cccf841, /* 0070(:1422):      DRD2B1: *idx3 = EU3(); EU3(idx1,var1)  */
-+    0x81c60000, /* 0074(:1427):    LCD: idx1 = var3 + var12; idx1 once var0; idx1 += inc0 */
-+    0xc399021b, /* 0078(:1429):      LCDEXT: idx2 = var7; idx2 > var8; idx2 += inc3 */
-+    0x80198000, /* 007C(:1429):      LCD: idx3 = var0; idx3 once var0; idx3 += inc0 */
-+    0x00008400, /* 0080(:1430):        DRD1A: idx1 = var0; FN=0 init=0 WS=0 RS=0 */
-+    0x00000f08, /* 0084(:1431):      DRD1A: var3 = idx1; FN=0 init=0 WS=0 RS=0 */
-+    0x81988000, /* 0088(:1434):    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-+    0x10000788, /* 008C(:1435):      DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x6000000a, /* 0090(:1436):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
-+    0x080cf05f, /* 0094(:1436):      DRD2B1: idx0 = EU3(); EU3(var1)  */
-+    0xc2188209, /* 0098(:1439):    LCDEXT: idx1 = var4; idx1 != var8; idx1 += inc1 */
-+    0x80190000, /* 009C(:1439):    LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-+    0x040001f8, /* 00A0(:1440):      DRD1A: FN=0 INT init=0 WS=0 RS=0 */
-+    0x000001f8, /* 00A4(:0):    NOP */
-+};
-+u32 MCD_ENetXmit_TDT[]=
-+{
-+    0x80004000, /* 0000(:1515):  LCDEXT: idx0 = 0x00000000; ; */
-+    0x81988000, /* 0004(:1515):  LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-+    0x10000788, /* 0008(:1516):    DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x6000000a, /* 000C(:1517):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
-+    0x080cf05f, /* 0010(:1517):    DRD2B1: idx0 = EU3(); EU3(var1)  */
-+    0x98180309, /* 0014(:1520):  LCD: idx0 = idx0; idx0 != var12; idx0 += inc1 */
-+    0x80004003, /* 0018(:1522):    LCDEXT: idx1 = 0x00000003; ; */
-+    0x81c60004, /* 001C(:1522):    LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */
-+    0x7000000e, /* 0020(:1523):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */
-+    0x014cf05f, /* 0024(:1523):      DRD2B1: var5 = EU3(); EU3(var1)  */
-+    0x7000000c, /* 0028(:1524):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
-+    0x028cf05f, /* 002C(:1524):      DRD2B1: var10 = EU3(); EU3(var1)  */
-+    0x7000000d, /* 0030(:1525):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
-+    0x018cf05f, /* 0034(:1525):      DRD2B1: var6 = EU3(); EU3(var1)  */
-+    0x70000004, /* 0038(:1526):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */
-+    0x01ccf04d, /* 003C(:1526):      DRD2B1: var7 = EU3(); EU3(var1,var13)  */
-+    0x10000b90, /* 0040(:1527):      DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x60000004, /* 0044(:1528):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT init=0 WS=0 RS=0 */
-+    0x020cf0a1, /* 0048(:1528):      DRD2B1: var8 = EU3(); EU3(var2,idx1)  */
-+    0xc3188312, /* 004C(:1531):    LCDEXT: idx1 = var6; idx1 > var12; idx1 += inc2 */
-+    0x83c70000, /* 0050(:1531):    LCD: idx2 = var7 + var14; idx2 once var0; idx2 += inc0 */
-+    0x00001f10, /* 0054(:1532):      DRD1A: var7 = idx2; FN=0 init=0 WS=0 RS=0 */
-+    0xc583a3c3, /* 0058(:1534):    LCDEXT: idx1 = var11, idx2 = var7; idx2 >= var15; idx1 += inc0, idx2 += inc3 */
-+    0x81042325, /* 005C(:1534):    LCD: idx3 = var2, idx4 = var8; idx4 == var12; idx3 += inc4, idx4 += inc5 */
-+    0x03e0c798, /* 0060(:1539):      DRD1A: *idx1 = *idx3; FN=0 init=31 WS=0 RS=0 */
-+    0xd8990000, /* 0064(:1542):    LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */
-+    0x9999e000, /* 0068(:1542):    LCD: idx3 = idx3; ; idx3 += inc0 */
-+    0x000acf98, /* 006C(:1543):      DRD1A: *idx3 = *idx3; FN=0 init=0 WS=1 RS=1 */
-+    0xd8992306, /* 0070(:1545):    LCDEXT: idx1 = idx1, idx2 = idx2; idx2 > var12; idx1 += inc0, idx2 += inc6 */
-+    0x9999e03f, /* 0074(:1545):    LCD: idx3 = idx3; ; idx3 += inc7 */
-+    0x03eac798, /* 0078(:1548):      DRD1A: *idx1 = *idx3; FN=0 init=31 WS=1 RS=1 */
-+    0xd8990000, /* 007C(:1551):    LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */
-+    0x9999e000, /* 0080(:1551):    LCD: idx3 = idx3; ; idx3 += inc0 */
-+    0x000acf98, /* 0084(:1552):      DRD1A: *idx3 = *idx3; FN=0 init=0 WS=1 RS=1 */
-+    0xd8990000, /* 0088(:1554):    LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */
-+    0x99832302, /* 008C(:1554):    LCD: idx3 = idx3, idx4 = var6; idx4 > var12; idx3 += inc0, idx4 += inc2 */
-+    0x0beac798, /* 0090(:1557):      DRD1A: *idx1 = *idx3; FN=0 TFD init=31 WS=1 RS=1 */
-+    0x81988000, /* 0094(:1559):    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-+    0x6000000b, /* 0098(:1560):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT init=0 WS=0 RS=0 */
-+    0x0c4cfc5f, /* 009C(:1560):      DRD2B1: *idx1 = EU3(); EU3(*idx1)  */
-+    0x81c80000, /* 00A0(:1562):    LCD: idx1 = var3 + var16; idx1 once var0; idx1 += inc0 */
-+    0xc5190312, /* 00A4(:1564):      LCDEXT: idx2 = var10; idx2 > var12; idx2 += inc2 */
-+    0x80198000, /* 00A8(:1564):      LCD: idx3 = var0; idx3 once var0; idx3 += inc0 */
-+    0x00008400, /* 00AC(:1565):        DRD1A: idx1 = var0; FN=0 init=0 WS=0 RS=0 */
-+    0x00000f08, /* 00B0(:1566):      DRD1A: var3 = idx1; FN=0 init=0 WS=0 RS=0 */
-+    0x81988000, /* 00B4(:1569):    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-+    0x10000788, /* 00B8(:1570):      DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-+    0x6000000a, /* 00BC(:1571):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
-+    0x080cf05f, /* 00C0(:1571):      DRD2B1: idx0 = EU3(); EU3(var1)  */
-+    0xc2988309, /* 00C4(:1574):    LCDEXT: idx1 = var5; idx1 != var12; idx1 += inc1 */
-+    0x80190000, /* 00C8(:1574):    LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-+    0x040001f8, /* 00CC(:1575):      DRD1A: FN=0 INT init=0 WS=0 RS=0 */
-+    0x000001f8, /* 00D0(:0):    NOP */
-+};
-+
-+#ifdef MCD_INCLUDE_EU
-+MCD_bufDesc MCD_singleBufDescs[NCHANNELS];
-+#endif
---- /dev/null
-+++ b/drivers/dma/MCD_tasksInit.c
-@@ -0,0 +1,238 @@
-+/*
-+ * drivers/dma/MCD_tasksInit.c
-+ *
-+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
-+ *     Kurt Mahan <kmahan@freescale.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/*
-+ * Autogenerated - Do not edit!
-+ */
-+
-+#include "MCD_dma.h"
-+
-+extern dmaRegs *MCD_dmaBar;
-+
-+
-+/*
-+ * Task 0
-+ */
-+
-+void  MCD_startDmaChainNoEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel)
-+{
-+
-+    MCD_SET_VAR(taskTable+channel, 2, (u32)currBD); /* var[2] */
-+    MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));   /* inc[1] */
-+    MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));  /* inc[0] */
-+    MCD_SET_VAR(taskTable+channel, 11, (u32)xferSize);  /* var[11] */
-+    MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));  /* inc[2] */
-+    MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);  /* var[0] */
-+    MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */
-+    MCD_SET_VAR(taskTable+channel, 3, (u32)0x00000000); /* var[3] */
-+    MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */
-+    MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */
-+    MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */
-+    MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */
-+    MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */
-+    MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */
-+    MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);    /* var[10] */
-+    MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000);    /* var[12] */
-+    MCD_SET_VAR(taskTable+channel, 13, (u32)0x80000000);    /* var[13] */
-+    MCD_SET_VAR(taskTable+channel, 14, (u32)0x00000010);    /* var[14] */
-+    MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000004);    /* var[15] */
-+    MCD_SET_VAR(taskTable+channel, 16, (u32)0x08000000);    /* var[16] */
-+    MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);    /* inc[3] */
-+    MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000000);    /* inc[4] */
-+    MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000001);    /* inc[5] */
-+    MCD_SET_VAR(taskTable+channel, 30, (u32)0x40000000);    /* inc[6] */
-+
-+    /* Set the task's Enable bit in its Task Control Register */
-+    MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
-+}
-+
-+
-+/*
-+ * Task 1
-+ */
-+
-+void  MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel)
-+{
-+
-+    MCD_SET_VAR(taskTable+channel, 7, (u32)srcAddr);    /* var[7] */
-+    MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));   /* inc[1] */
-+    MCD_SET_VAR(taskTable+channel, 2, (u32)destAddr);   /* var[2] */
-+    MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));  /* inc[0] */
-+    MCD_SET_VAR(taskTable+channel, 3, (u32)dmaSize);    /* var[3] */
-+    MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));  /* inc[2] */
-+    MCD_SET_VAR(taskTable+channel, 5, (u32)flags);  /* var[5] */
-+    MCD_SET_VAR(taskTable+channel, 1, (u32)currBD); /* var[1] */
-+    MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);  /* var[0] */
-+    MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */
-+    MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */
-+    MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */
-+    MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000004); /* var[9] */
-+    MCD_SET_VAR(taskTable+channel, 10, (u32)0x08000000);    /* var[10] */
-+    MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);    /* inc[3] */
-+    MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000001);    /* inc[4] */
-+    MCD_SET_VAR(taskTable+channel, 29, (u32)0x40000000);    /* inc[5] */
-+
-+    /* Set the task's Enable bit in its Task Control Register */
-+    MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
-+}
-+
-+
-+/*
-+ * Task 2
-+ */
-+
-+void  MCD_startDmaChainEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel)
-+{
-+
-+    MCD_SET_VAR(taskTable+channel, 3, (u32)currBD); /* var[3] */
-+    MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));   /* inc[1] */
-+    MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));  /* inc[0] */
-+    MCD_SET_VAR(taskTable+channel, 12, (u32)xferSize);  /* var[12] */
-+    MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));  /* inc[2] */
-+    MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);  /* var[0] */
-+    MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */
-+    MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000); /* var[2] */
-+    MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */
-+    MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */
-+    MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */
-+    MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */
-+    MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */
-+    MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */
-+    MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);    /* var[10] */
-+    MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000000);    /* var[11] */
-+    MCD_SET_VAR(taskTable+channel, 13, (u32)0x00000000);    /* var[13] */
-+    MCD_SET_VAR(taskTable+channel, 14, (u32)0x80000000);    /* var[14] */
-+    MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000010);    /* var[15] */
-+    MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000001);    /* var[16] */
-+    MCD_SET_VAR(taskTable+channel, 17, (u32)0x00000004);    /* var[17] */
-+    MCD_SET_VAR(taskTable+channel, 18, (u32)0x08000000);    /* var[18] */
-+    MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);    /* inc[3] */
-+    MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000000);    /* inc[4] */
-+    MCD_SET_VAR(taskTable+channel, 29, (u32)0xc0000000);    /* inc[5] */
-+    MCD_SET_VAR(taskTable+channel, 30, (u32)0x80000001);    /* inc[6] */
-+    MCD_SET_VAR(taskTable+channel, 31, (u32)0x40000000);    /* inc[7] */
-+
-+    /* Set the task's Enable bit in its Task Control Register */
-+    MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
-+}
-+
-+
-+/*
-+ * Task 3
-+ */
-+
-+void  MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel)
-+{
-+
-+    MCD_SET_VAR(taskTable+channel, 8, (u32)srcAddr);    /* var[8] */
-+    MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));   /* inc[1] */
-+    MCD_SET_VAR(taskTable+channel, 3, (u32)destAddr);   /* var[3] */
-+    MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));  /* inc[0] */
-+    MCD_SET_VAR(taskTable+channel, 4, (u32)dmaSize);    /* var[4] */
-+    MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));  /* inc[2] */
-+    MCD_SET_VAR(taskTable+channel, 6, (u32)flags);  /* var[6] */
-+    MCD_SET_VAR(taskTable+channel, 2, (u32)currBD); /* var[2] */
-+    MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);  /* var[0] */
-+    MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */
-+    MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */
-+    MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */
-+    MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */
-+    MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000001);    /* var[10] */
-+    MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000004);    /* var[11] */
-+    MCD_SET_VAR(taskTable+channel, 12, (u32)0x08000000);    /* var[12] */
-+    MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);    /* inc[3] */
-+    MCD_SET_VAR(taskTable+channel, 28, (u32)0xc0000000);    /* inc[4] */
-+    MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000000);    /* inc[5] */
-+    MCD_SET_VAR(taskTable+channel, 30, (u32)0x80000001);    /* inc[6] */
-+    MCD_SET_VAR(taskTable+channel, 31, (u32)0x40000000);    /* inc[7] */
-+
-+    /* Set the task's Enable bit in its Task Control Register */
-+    MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
-+}
-+
-+
-+/*
-+ * Task 4
-+ */
-+
-+void  MCD_startDmaENetRcv(char *bDBase, char *currBD, char *rcvFifoPtr, volatile TaskTableEntry *taskTable, int channel)
-+{
-+
-+    MCD_SET_VAR(taskTable+channel, 0, (u32)bDBase); /* var[0] */
-+    MCD_SET_VAR(taskTable+channel, 3, (u32)currBD); /* var[3] */
-+    MCD_SET_VAR(taskTable+channel, 6, (u32)rcvFifoPtr); /* var[6] */
-+    MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */
-+    MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000); /* var[2] */
-+    MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */
-+    MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */
-+    MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */
-+    MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */
-+    MCD_SET_VAR(taskTable+channel, 9, (u32)0x0000ffff); /* var[9] */
-+    MCD_SET_VAR(taskTable+channel, 10, (u32)0x30000000);    /* var[10] */
-+    MCD_SET_VAR(taskTable+channel, 11, (u32)0x0fffffff);    /* var[11] */
-+    MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000008);    /* var[12] */
-+    MCD_SET_VAR(taskTable+channel, 24, (u32)0x00000000);    /* inc[0] */
-+    MCD_SET_VAR(taskTable+channel, 25, (u32)0x60000000);    /* inc[1] */
-+    MCD_SET_VAR(taskTable+channel, 26, (u32)0x20000004);    /* inc[2] */
-+    MCD_SET_VAR(taskTable+channel, 27, (u32)0x40000000);    /* inc[3] */
-+
-+    /* Set the task's Enable bit in its Task Control Register */
-+    MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
-+}
-+
-+
-+/*
-+ * Task 5
-+ */
-+
-+void  MCD_startDmaENetXmit(char *bDBase, char *currBD, char *xmitFifoPtr, volatile TaskTableEntry *taskTable, int channel)
-+{
-+
-+    MCD_SET_VAR(taskTable+channel, 0, (u32)bDBase); /* var[0] */
-+    MCD_SET_VAR(taskTable+channel, 3, (u32)currBD); /* var[3] */
-+    MCD_SET_VAR(taskTable+channel, 11, (u32)xmitFifoPtr);   /* var[11] */
-+    MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */
-+    MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000); /* var[2] */
-+    MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */
-+    MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */
-+    MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */
-+    MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */
-+    MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */
-+    MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */
-+    MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);    /* var[10] */
-+    MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000);    /* var[12] */
-+    MCD_SET_VAR(taskTable+channel, 13, (u32)0x0000ffff);    /* var[13] */
-+    MCD_SET_VAR(taskTable+channel, 14, (u32)0xffffffff);    /* var[14] */
-+    MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000004);    /* var[15] */
-+    MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000008);    /* var[16] */
-+    MCD_SET_VAR(taskTable+channel, 24, (u32)0x00000000);    /* inc[0] */
-+    MCD_SET_VAR(taskTable+channel, 25, (u32)0x60000000);    /* inc[1] */
-+    MCD_SET_VAR(taskTable+channel, 26, (u32)0x40000000);    /* inc[2] */
-+    MCD_SET_VAR(taskTable+channel, 27, (u32)0xc000fffc);    /* inc[3] */
-+    MCD_SET_VAR(taskTable+channel, 28, (u32)0xe0000004);    /* inc[4] */
-+    MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000000);    /* inc[5] */
-+    MCD_SET_VAR(taskTable+channel, 30, (u32)0x4000ffff);    /* inc[6] */
-+    MCD_SET_VAR(taskTable+channel, 31, (u32)0xe0000001);    /* inc[7] */
-+
-+    /* Set the task's Enable bit in its Task Control Register */
-+    MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
-+}
---- /dev/null
-+++ b/drivers/dma/MCD_tasksInit.h
-@@ -0,0 +1,64 @@
-+/*
-+ * drivers/dma/MCD_tasksInit.h
-+ *
-+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
-+ *     Kurt Mahan <kmahan@freescale.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef MCD_TSK_INIT_H
-+#define MCD_TSK_INIT_H 1
-+
-+/*
-+ * Autogenerated - Do not edit!
-+ */
-+
-+/*
-+ * Task 0
-+ */
-+void  MCD_startDmaChainNoEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel);
-+
-+
-+/*
-+ * Task 1
-+ */
-+void  MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel);
-+
-+
-+/*
-+ * Task 2
-+ */
-+void  MCD_startDmaChainEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel);
-+
-+
-+/*
-+ * Task 3
-+ */
-+void  MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel);
-+
-+
-+/*
-+ * Task 4
-+ */
-+void  MCD_startDmaENetRcv(char *bDBase, char *currBD, char *rcvFifoPtr, volatile TaskTableEntry *taskTable, int channel);
-+
-+
-+/*
-+ * Task 5
-+ */
-+void  MCD_startDmaENetXmit(char *bDBase, char *currBD, char *xmitFifoPtr, volatile TaskTableEntry *taskTable, int channel);
-+
-+#endif  /* MCD_TSK_INIT_H */
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-algo-mcf.h
-@@ -0,0 +1,23 @@
-+#ifndef I2C_ALGO_MCF_H
-+#define I2C_ALGO_MCF_H 1
-+
-+/* --- Defines for pcf-adapters ---------------------------------------	*/
-+#include <linux/i2c.h>
-+
-+struct i2c_algo_mcf_data {
-+	void *data;		/* private data for lolevel routines	*/
-+	void (*setmcf) (void *data, int ctl, int val);
-+	int (*getmcf) (void *data, int ctl);
-+	int (*getown) (void *data);
-+	int (*getclock) (void *data);
-+	void (*waitforpin) (void);
-+	/* local settings */
-+	int udelay;
-+	int mdelay;
-+	int timeout;
-+};
-+
-+int i2c_mcf_add_bus(struct i2c_adapter *);
-+int i2c_mcf_del_bus(struct i2c_adapter *);
-+
-+#endif /* I2C_ALGO_MCF_H */
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-mcf548x.c
-@@ -0,0 +1,595 @@
-+/*
-+ * 	Performance and stability improvements: (C) Copyright 2008,
-+ *	Adrian Cox <adrian@humboldt.co.uk>
-+ *	ColdFire 547x/548x I2C master support
-+ * 	Shrek Wu (b16972@freescale.com )moved the code driver/i2c/alg/mcf.c
-+ *      into driver/i2c/busses.And changed the driver to a platform driver.
-+ */
-+#include <linux/i2c.h>
-+#include "i2c-algo-mcf.h"
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/sched.h>
-+#include <linux/interrupt.h>
-+#include <asm/io.h>
-+
-+#include <asm/coldfire.h>
-+#include <asm/m5485sim.h>
-+#include <asm/m5485i2c.h>
-+
-+#define get_clock(adap) (clock)
-+#define get_own(adap) 	(own)
-+
-+static int clock = 0x3b;  /*50000 / 1024 ~ 49 KHz*/
-+module_param(clock, int, 0);
-+MODULE_PARM_DESC(clock,
-+	"Set I2C clock in kHz: 400=fast mode (default == 49khz)");
-+
-+static int own = 0x78;
-+module_param(own, int, 0);
-+MODULE_PARM_DESC(clock, "Set I2C Master controller address(0x78)");
-+
-+static struct i2c_algo_mcf_data i2c_mcf_board_data = {
-+	.timeout =	10000,
-+};
-+
-+static struct i2c_adapter i2c_mcf_board_adapter = {
-+	.owner = THIS_MODULE,
-+	.name = "MCF5485 adapter",
-+	.id = I2C_HW_MPC107,
-+	.algo_data = &i2c_mcf_board_data,
-+	.class = I2C_CLASS_HWMON,
-+	.timeout = 100,
-+	.retries = 2
-+};
-+/*
-+ *  static void i2c_start()
-+ *
-+ *  Generates START signal
-+ */
-+static void
-+i2c_start(
-+	struct i2c_algo_mcf_data *adap
-+) {
-+	MCF_I2CR |= MCF_I2CR_MSTA;
-+}
-+
-+
-+/*
-+ *  static void i2c_stop()
-+ *
-+ *  Generates STOP signal
-+ */
-+static void
-+i2c_stop(
-+	struct i2c_algo_mcf_data *adap
-+) {
-+	MCF_I2CR &= ~MCF_I2CR_MSTA;
-+}
-+
-+static int
-+i2c_getack(
-+	struct i2c_algo_mcf_data *adap
-+) {
-+	return !(MCF_I2SR & MCF_I2SR_RXAK);
-+}
-+
-+/*
-+ *  static void i2c_repstart()
-+ *
-+ *  Generates repeated start signal (without STOP while mastering the bus)
-+ */
-+static void
-+i2c_repstart(
-+	struct i2c_algo_mcf_data *adap
-+) {
-+	MCF_I2CR |= MCF_I2CR_RSTA;
-+	MCF_I2CR |= MCF_I2CR_MTX;
-+}
-+
-+
-+/*
-+ *  static void wait_for_bb()
-+ *
-+ *  Wait for bus idle state
-+ */
-+static int
-+wait_for_bb(
-+	struct i2c_algo_mcf_data *adap
-+) {
-+	int i;
-+	for (i = 0; i < adap->timeout; i++) {
-+		if (!(MCF_I2SR & MCF_I2SR_IBB))
-+			return 0;
-+		udelay(100);
-+	}
-+	printk(KERN_ERR "%s: timeout", __FUNCTION__);
-+	return -ETIMEDOUT;
-+}
-+
-+/*
-+ *  static void wait_for_not_bb()
-+ *
-+ *  Wait for bus busy state
-+ */
-+static int
-+wait_for_not_bb(
-+	struct i2c_algo_mcf_data *adap
-+) {
-+	int i;
-+	for (i = 0; i < adap->timeout; i++) {
-+		if (MCF_I2SR & MCF_I2SR_IBB)
-+			return 0;
-+		udelay(100);
-+	}
-+	printk(KERN_ERR "%s: timeout", __FUNCTION__);
-+	return -ETIMEDOUT;
-+}
-+
-+/*
-+ *  static void wait_xfer_done()
-+ *
-+ *  Wait for transfer to complete
-+ */
-+static int
-+wait_xfer_done(
-+	struct i2c_algo_mcf_data *adap
-+) {
-+	int i;
-+
-+	for (i = 0; i < adap->timeout; i++) {
-+		if (MCF_I2SR & MCF_I2SR_IIF) {
-+			MCF_I2SR &= ~MCF_I2SR_IIF;
-+			return 0;
-+		}
-+		udelay(10);
-+	}
-+	printk(KERN_ERR "%s: timeout", __FUNCTION__);
-+	return -ETIMEDOUT;
-+}
-+
-+
-+/*
-+ *  static void i2c_set_addr()
-+ *
-+ *  Sets slave address to communicate
-+ */
-+static int
-+i2c_set_addr(
-+	struct i2c_algo_mcf_data *adap,
-+	struct i2c_msg *msg,
-+	int retries
-+) {
-+	unsigned short flags = msg->flags;
-+	unsigned char addr;
-+	MCF_I2CR |= MCF_I2CR_MTX;
-+	if ((flags & I2C_M_TEN)) {
-+		/* 10 bit address not supported yet */
-+		return -EIO;
-+	} else {
-+		/* normal 7bit address */
-+		addr = (msg->addr << 1);
-+		if (flags & I2C_M_RD)
-+			addr |= 1;
-+		if (flags & I2C_M_REV_DIR_ADDR)
-+			addr ^= 1;
-+
-+		MCF_I2DR = addr;
-+	}
-+	return 0;
-+}
-+
-+
-+/*
-+ *  static void mcf_i2c_init()
-+ *
-+ *  Perform ColdFire i2c initialization
-+ */
-+static void
-+mcf_i2c_init(struct i2c_algo_mcf_data *adap)
-+{
-+	u8 dummy;
-+	/* Setup GPIO lines */
-+	MCF_PAR_FECI2CIRQ |= MCF_PAR_SDA;
-+	MCF_PAR_FECI2CIRQ |= MCF_PAR_SCL;
-+
-+	/*  Ensure slaves are in idle state */
-+	if (MCF_I2SR & MCF_I2SR_IBB) {
-+		MCF_I2ICR = 0x00;
-+		MCF_I2CR  = 0x00;
-+		MCF_I2CR  = 0x0A;
-+		dummy = MCF_I2DR;
-+		MCF_I2SR  = 0x00;
-+		MCF_I2CR  = 0x00;
-+		MCF_I2ICR = 0x01;
-+	}
-+
-+	/* setup SCL clock */
-+	MCF_I2FDR = get_clock(adap);
-+
-+	/* set slave address */
-+	MCF_I2AR = get_own(adap);
-+
-+	/* enable I2C module */
-+	MCF_I2CR = MCF_I2CR_IEN;
-+}
-+
-+static int i2c_outb(
-+	struct i2c_adapter *i2c_adap,
-+	char c
-+) {
-+
-+	struct i2c_algo_mcf_data *adap = i2c_adap->algo_data;
-+	int timeout;
-+	/* Put data to be sent */
-+	MCF_I2DR = c;
-+	/* Wait for xfer completed*/
-+	timeout = wait_xfer_done(adap);
-+	if (timeout) {
-+		i2c_stop(adap);
-+		wait_for_bb(adap);
-+		printk(KERN_ERR "i2c-algo-mcf: %s i2c_write: "
-+			"error - timeout.\n", i2c_adap->name);
-+		return -EREMOTEIO; /* got a better one ?? */
-+	}
-+
-+	return 0;
-+}
-+
-+
-+/*
-+ *  static void mcf_sendbytes()
-+ *
-+ *  Perform tx data transfer
-+ */
-+static int
-+mcf_sendbytes(
-+	struct i2c_adapter *i2c_adap,
-+	const char *buf,
-+	int count, int last
-+) {
-+	struct i2c_algo_mcf_data *adap = i2c_adap->algo_data;
-+	int ret, i;
-+
-+	/* Set master TX mode */
-+	MCF_I2CR |= MCF_I2CR_MTX;
-+
-+	for (i = 0; i < count; ++i) {
-+		printk(KERN_DEBUG "i2c-algo-mcf: %s i2c_write: writing %2.2X\n",
-+		      i2c_adap->name, buf[i]&0xff);
-+		ret = i2c_outb(i2c_adap, buf[i]);
-+		if (ret < 0)
-+			return ret;
-+	}
-+	if (last) {
-+		i2c_stop(adap);
-+		wait_for_bb(adap);
-+	} else {
-+	/*	i2c_repstart(adap);*/
-+	}
-+
-+	return (i);
-+}
-+
-+
-+/*
-+ *  static void mcf_readbytes()
-+ *
-+ *  Perform rx data transfer
-+ */
-+static int
-+mcf_readbytes(
-+	struct i2c_adapter *i2c_adap,
-+	char *buf,
-+	int count, int last
-+) {
-+	int i;
-+	struct i2c_algo_mcf_data *adap = i2c_adap->algo_data;
-+	u8 dummy;
-+
-+	/* Set master RX mode */
-+	MCF_I2CR &= ~MCF_I2CR_MTX;
-+	MCF_I2CR &= ~MCF_I2CR_TXAK;
-+	dummy = MCF_I2DR;
-+
-+	for (i = 0; i < count-1; i++) {
-+		if (wait_xfer_done(adap)) {
-+			i2c_stop(adap);
-+			wait_for_bb(adap);
-+			printk(KERN_DEBUG
-+			    "i2c-algo-mcf: mcf_readbytes timed out.\n");
-+			return (-1);
-+		}
-+
-+		/* store next data byte */
-+		buf[i] = MCF_I2DR;
-+	}
-+
-+	if (wait_xfer_done(adap)) {
-+		i2c_stop(adap);
-+		wait_for_bb(adap);
-+		printk(KERN_DEBUG "i2c-algo-mcf: mcf_readbytes timed out.\n");
-+		return (-1);
-+	}
-+
-+	/* Disable acknowlege (set I2CR.TXAK) */
-+	MCF_I2CR |= MCF_I2CR_TXAK;
-+	buf[i] = MCF_I2DR;
-+	if (wait_xfer_done(adap)) {
-+		i2c_stop(adap);
-+		wait_for_bb(adap);
-+		printk(KERN_DEBUG "i2c-algo-mcf: mcf_readbytes timed out.\n");
-+		return (-1);
-+	}
-+
-+	if (last) {
-+		i2c_stop(adap);
-+		wait_for_bb(adap);
-+	} else {
-+	/*	i2c_repstart(adap);*/
-+	}
-+
-+	return (i+1);
-+}
-+
-+
-+/*
-+ *  static void mcf_xfer()
-+ *
-+ *  Perform master data I/O transfer
-+ */
-+static int
-+mcf_xfer(
-+	struct i2c_adapter *i2c_adap,
-+	struct i2c_msg *msgs,
-+	int num
-+) {
-+	struct i2c_algo_mcf_data *adap = i2c_adap->algo_data;
-+	struct i2c_msg *pmsg;
-+	int i;
-+	int ret = 0, timeout;
-+
-+	/* Skip own address */
-+	if (get_own(adap) == (msgs[0].addr << 1))
-+		return -EIO;
-+
-+	/*  Ensure slaves are in idle state */
-+	if (MCF_I2SR & MCF_I2SR_IBB) {
-+		MCF_I2ICR = 0x00;
-+		MCF_I2CR  = 0x00;
-+		MCF_I2CR  = 0x0A;
-+		timeout = MCF_I2DR;
-+		MCF_I2SR  = 0x00;
-+		MCF_I2CR  = 0x00;
-+		MCF_I2ICR = 0x01;
-+	}
-+	/* setup SCL clock */
-+	MCF_I2FDR = get_clock(adap);
-+	/* set slave address */
-+	MCF_I2AR = get_own(adap);
-+	/* enable I2C module */
-+	MCF_I2CR = MCF_I2CR_IEN;
-+
-+	MCF_I2CR |= MCF_I2CR_TXAK;
-+
-+	/* Check for bus busy */
-+	wait_for_bb(adap);
-+
-+	for (i = 0; ret >= 0 && i < num; i++) {
-+		if (MCF_I2SR & MCF_I2SR_IBB) {
-+			MCF_I2ICR = 0x00;
-+			MCF_I2CR  = 0x00;
-+                	MCF_I2CR  = 0x0A;
-+                	timeout = MCF_I2DR;
-+                	MCF_I2SR  = 0x00;
-+                	MCF_I2CR  = 0x00;
-+			MCF_I2ICR = 0x01;
-+		}
-+		/* setup SCL clock */
-+		MCF_I2FDR = get_clock(adap);
-+		/* set slave address */
-+		MCF_I2AR = get_own(adap);
-+		/* enable I2C module */
-+		MCF_I2CR = MCF_I2CR_IEN;
-+
-+		MCF_I2CR |= MCF_I2CR_TXAK;
-+
-+		/* Check for bus busy */
-+		wait_for_bb(adap);
-+
-+		pmsg = &msgs[i];
-+
-+		printk(KERN_DEBUG "i2c-algo-mcf: Doing %s %d bytes "
-+			"to 0x%02x - %d of %d messages\n",
-+			pmsg->flags & I2C_M_RD ? "read" : "write",
-+			pmsg->len, pmsg->addr, i + 1, num);
-+
-+		/* Send START */
-+		/*if (i == 0)*/
-+			i2c_start(adap);
-+
-+		/* Wait for Bus Busy */
-+		wait_for_not_bb(adap);
-+
-+		MCF_I2CR |= MCF_I2CR_MTX;
-+
-+		ret = i2c_set_addr(adap, pmsg, i2c_adap->retries);
-+		if (ret < 0)
-+			return ret;
-+
-+		/* Wait for address transfer completion */
-+		wait_xfer_done(adap);
-+
-+		/* Check for ACK */
-+		if (!i2c_getack(adap)) {
-+			i2c_stop(adap);
-+			wait_for_bb(adap);
-+			printk(KERN_DEBUG "i2c-algo-mcf: No ack after "
-+				    "send address in mcf_xfer\n");
-+			return (-EREMOTEIO);
-+		}
-+
-+		printk(KERN_DEBUG "i2c-algo-mcf: Msg %d, "
-+				  "addr = 0x%x, flags = 0x%x, len = %d\n",
-+				i, msgs[i].addr, msgs[i].flags, msgs[i].len);
-+		/* Read */
-+		if (pmsg->flags & I2C_M_RD) {
-+			/* read bytes into buffer*/
-+			ret = mcf_readbytes(i2c_adap, pmsg->buf, pmsg->len,
-+						(i + 1 == num));
-+
-+			if (ret != pmsg->len) {
-+				printk(KERN_DEBUG "i2c-algo-mcf: fail: "
-+					    "only read %d bytes.\n", ret);
-+			} else {
-+				printk(KERN_DEBUG "i2c-algo-mcf: "
-+						  "read %d bytes.\n", ret);
-+			}
-+		} else {
-+			/* write bytes into buffer*/
-+			ret = mcf_sendbytes(i2c_adap, pmsg->buf, pmsg->len,
-+						(i + 1 == num));
-+			if (ret != pmsg->len) {
-+				printk(KERN_DEBUG "i2c-algo-mcf: fail: "
-+					    "only wrote %d bytes.\n", ret);
-+			} else {
-+				printk(KERN_DEBUG "i2c-algo-mcf: wrote"
-+					"%d bytes.\n", ret);
-+			}
-+		}
-+	MCF_I2CR = 0;
-+	}
-+
-+	/* Disable I2C module */
-+	MCF_I2CR = 0;
-+	return (i);
-+}
-+
-+
-+/*
-+ *  static void mcf_func()
-+ *
-+ *  Return algorithm funtionality
-+ */
-+static u32
-+mcf_func(
-+	struct i2c_adapter *i2c_adap
-+) {
-+	return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
-+}
-+
-+/*
-+ *  ColdFire bus algorithm callbacks
-+ */
-+static struct i2c_algorithm mcf_algo = {
-+	.master_xfer    = mcf_xfer,
-+	.functionality  = mcf_func,
-+};
-+
-+/***********************************************************/
-+struct coldfire_i2c {
-+	void __iomem *base;
-+	struct resource *irqarea;
-+	struct resource *ioarea;
-+	u32 irq;
-+	struct i2c_adapter *adap;
-+	u32 flags;
-+};
-+
-+/*
-+ *  registering functions to load algorithms at runtime
-+ */
-+int i2c_mcf_add_bus(struct i2c_adapter *adap)
-+{
-+	struct i2c_algo_mcf_data *mcf_adap = adap->algo_data;
-+
-+	/*adap->id |= mcf_algo.id;*/
-+	adap->algo = &mcf_algo;
-+	adap->timeout = 100;
-+
-+	mcf_i2c_init(mcf_adap);
-+
-+#ifdef MODULE
-+	MOD_INC_USE_COUNT;
-+#endif
-+
-+	i2c_add_adapter(adap);
-+
-+	return 0;
-+}
-+
-+static int mcf548x_i2c_probe(struct platform_device *pdev)
-+{
-+	struct coldfire_i2c *i2c;
-+	int rc = 0;
-+
-+	/************************************************************/
-+	i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
-+	if (!i2c) {
-+		printk(KERN_ERR "%s kzalloc coldfire_i2c faile\n",
-+				__FUNCTION__);
-+		return -ENOMEM;
-+	}
-+	/****************************************************************/
-+	platform_set_drvdata(pdev, i2c);
-+
-+	i2c->adap = &i2c_mcf_board_adapter;
-+	i2c->adap->dev.parent = &pdev->dev;
-+	rc = i2c_mcf_add_bus(i2c->adap);
-+	if (rc < 0) {
-+		printk(KERN_ERR "%s - failed to add adapter\n", __FUNCTION__);
-+		rc = -ENODEV;
-+		goto fail_add;
-+	}
-+
-+	printk(KERN_INFO "i2c-algo-mcf.o: I2C ColdFire algorithm"
-+			" module is loaded.\n");
-+	return rc;
-+
-+fail_add:
-+	kfree(i2c);
-+	return rc;
-+};
-+
-+static int mcf548x_i2c_remove(struct platform_device *pdev)
-+{
-+	struct coldfire_i2c *i2c = platform_get_drvdata(pdev);
-+
-+	i2c_del_adapter(i2c->adap);
-+	platform_set_drvdata(pdev, NULL);
-+	iounmap(i2c->base);
-+	kfree(i2c);
-+	return 0;
-+};
-+
-+/* Structure for a device driver */
-+static struct platform_driver mcf548x_i2c_driver = {
-+	.probe 	= mcf548x_i2c_probe,
-+	.remove = mcf548x_i2c_remove,
-+	.driver	= {
-+		.owner = THIS_MODULE,
-+		.name = "MCF548X-i2c",
-+	},
-+};
-+
-+static int __init coldfire_i2c_init(void)
-+{
-+	return platform_driver_register(&mcf548x_i2c_driver);
-+}
-+
-+static void __exit coldfire_i2c_exit(void)
-+{
-+	platform_driver_unregister(&mcf548x_i2c_driver);
-+}
-+
-+module_init(coldfire_i2c_init);
-+module_exit(coldfire_i2c_exit);
-+
-+MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
-+MODULE_DESCRIPTION
-+    ("I2C-Bus adapter for MCF547x and MCF548x processors");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-mcf.c
-@@ -0,0 +1,573 @@
-+/*
-+    i2c-mcf.c - Part of lm_sensors, Linux kernel modules for hardware monitoring
-+
-+    Copyright (c) 2005, Derek CL Cheung <derek.cheung@sympatico.ca>
-+					<http://www3.sympatico.ca/derek.cheung>
-+
-+    Copyright (c) 2006-2007, emlix
-+			Sebastian Hess <sh@emlix.com>
-+
-+    Copyright (c) 2006-2007 Freescale Semiconductor, Inc
-+			Yaroslav Vinogradov <yaroslav.vinogradov@freescale.com>
-+			Matt Waddel <Matt.Waddel@freescale.com>
-+
-+    This program is free software; you can redistribute it and/or modify
-+    it under the terms of the GNU General Public License as published by
-+    the Free Software Foundation; either version 2 of the License, or
-+    (at your option) any later version.
-+
-+    This program is distributed in the hope that it will be useful,
-+    but WITHOUT ANY WARRANTY; without even the implied warranty of
-+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+    GNU General Public License for more details.
-+
-+    You should have received a copy of the GNU General Public License
-+    along with this program; if not, write to the Free Software
-+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+
-+    Changes:
-+    v0.1 	26 March 2005
-+        	Initial Release - developed on uClinux with 2.6.9 kernel
-+
-+    v0.2	29 May 2006
-+		Modified to be more generic and added support for
-+		i2c_master_xfer
-+
-+    This I2C adaptor supports the ColdFire CPU I2C module. Since most Coldfire
-+    CPUs' I2C module use the same register set (e.g., MCF5249), the code is very
-+    portable and re-usable to other Coldfire CPUs.
-+
-+    The transmission frequency is set at about 100KHz for the CPU board with
-+    8MHz crystal. If the CPU board uses different system clock frequency, you 
-+    should change the following line:
-+                static int __init i2c_coldfire_init(void)
-+                {
-+                                .........
-+                        // Set transmission frequency 0x15 = ~100kHz
-+                        *MCF_I2C_I2FDR = 0x15;
-+                                ........
-+                }
-+
-+    Remember to perform a dummy read to set the ColdFire CPU's I2C module for 
-+    read before reading the actual byte from a device
-+
-+    The I2C_SM_BUS_BLOCK_DATA function are not yet ready but most lm_senors 
-+    do not care
-+*/
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/i2c.h>
-+#include <linux/delay.h>
-+#include <linux/string.h>
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+#include <asm/types.h>
-+#include <linux/platform_device.h>
-+#include "i2c-mcf.h"
-+
-+
-+static struct i2c_algorithm coldfire_algorithm = {
-+	/*.name		= "ColdFire I2C algorithm",
-+	.id		= I2C_ALGO_SMBUS,*/
-+	.smbus_xfer	= coldfire_i2c_access,
-+	.master_xfer    = coldfire_i2c_master,
-+	.functionality	= coldfire_func,
-+};
-+
-+
-+static struct i2c_adapter coldfire_adapter = {
-+	.owner		= THIS_MODULE,
-+	.class          = I2C_CLASS_HWMON,
-+	.algo		= &coldfire_algorithm,
-+	.name		= "ColdFire I2C adapter",
-+};
-+
-+
-+__u16 lastaddr;
-+__u16 lastop;
-+
-+static inline int coldfire_do_first_start(__u16 addr,__u16 flags)
-+{
-+	int err;
-+	/*
-+	 * Generate a stop and put the I2C module into slave mode
-+	 */
-+	*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MSTA;
-+
-+	/*
-+	 * Generate a new Start signal
-+	 */
-+	err = coldfire_i2c_start(flags & I2C_M_RD ? I2C_SMBUS_READ : I2C_SMBUS_WRITE,
-+				addr, FIRST_START);
-+	if(err) return err;
-+
-+	lastaddr = addr;
-+	lastop = flags & I2C_M_RD;	/* Ensure everything for new start */
-+	return 0;
-+}
-+
-+
-+/*
-+ *  read one byte data from the I2C bus
-+ */
-+static int coldfire_read_data(u8 * const rxData, const enum I2C_ACK_TYPE ackType) {
-+
-+	int timeout;
-+
-+	*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MTX;     	/* master receive mode*/
-+
-+	if (ackType == NACK)
-+		*MCF_I2C_I2CR |= MCF_I2C_I2CR_TXAK;     /* generate NA */
-+	else
-+		*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK;    /* generate ACK */
-+
-+
-+	/* read data from the I2C bus */
-+	*rxData = *MCF_I2C_I2DR;
-+
-+	/* printk(">>> %s I2DR data is %.2x \n", __FUNCTION__, *rxData); */
-+
-+	/* wait for data transfer to complete */
-+	timeout = 500;
-+	while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IIF))
-+		udelay(1);
-+	if (timeout <= 0)
-+		printk("%s - I2C IIF never set. Timeout is %d \n", __FUNCTION__,
-+			timeout);
-+
-+
-+	/* reset the interrupt bit */
-+	*MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF;
-+
-+	if (timeout <= 0 )
-+		return -1;
-+	else
-+		return 0;
-+
-+};
-+
-+
-+/*
-+ *  write one byte data onto the I2C bus
-+ */
-+static int coldfire_write_data(const u8 txData) {
-+
-+	int timeout;
-+
-+	timeout = 500;
-+
-+	*MCF_I2C_I2CR |= MCF_I2C_I2CR_MTX;	/* I2C module into TX mode */
-+	*MCF_I2C_I2DR = txData;			/* send the data */
-+
-+	/* wait for data transfer to complete */
-+	/* rely on the interrupt handling bit */
-+	timeout = 500;
-+	while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IIF))
-+		udelay(1);
-+	if (timeout <=0)
-+		printk("%s - I2C IIF never set. Timeout is %d \n", __FUNCTION__,
-+			timeout);
-+
-+
-+	/* reset the interrupt bit */
-+	*MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF;
-+
-+	if (timeout <= 0 )
-+		return -1;
-+	else
-+		return 0;
-+
-+};
-+
-+
-+
-+
-+/*
-+ *  Generate I2C start or repeat start signal
-+ *  Combine the 7 bit target_address and the R/W bit and put it onto the I2C bus
-+ */
-+static int coldfire_i2c_start(const char read_write, const u16 target_address, const enum I2C_START_TYPE start_type) {
-+
-+	int timeout;
-+
-+	/* printk(">>> %s START TYPE %s \n", __FUNCTION__, 
-+		   start_type == FIRST_START ? "FIRST_START":"REPEAT_START");*/
-+
-+	*MCF_I2C_I2CR |= MCF_I2C_I2CR_IEN;
-+
-+	if (start_type == FIRST_START) {
-+		/* Make sure the I2C bus is idle */
-+		timeout = 500;		/* 500us timeout */
-+		while (timeout-- && (*MCF_I2C_I2SR & MCF_I2C_I2SR_IBB))
-+			udelay(1);
-+		if (timeout <= 0) {
-+			printk("%s - I2C bus always busy in the past 500us timeout is %d \n", __FUNCTION__, timeout);
-+			goto check_rc;
-+		}
-+		/* generate a START and put the I2C module into MASTER TX mode*/
-+		*MCF_I2C_I2CR |= (MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_MTX);
-+
-+		/* wait for bus busy to be set */
-+		timeout = 500;
-+		while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IBB))
-+			udelay(1);
-+		if (timeout <= 0) {
-+			printk("%s - I2C bus is never busy after START. Timeout is %d \n", __FUNCTION__, timeout);
-+			goto check_rc;
-+		}
-+
-+	} else {
-+		/* this is repeat START */
-+		udelay(500);	/* need some delay before repeat start */
-+		*MCF_I2C_I2CR |= (MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_RSTA);
-+	}
-+
-+
-+	/* combine the R/W bit and the 7 bit target address and put it onto 
-+	   the I2C bus */
-+	*MCF_I2C_I2DR = ((target_address & 0x7F) << 1) | (read_write == I2C_SMBUS_WRITE ? 0x00 : 0x01);
-+
-+	/* wait for bus transfer to complete */
-+	/* when one byte transfer is completed, IIF set at the faling edge of 
-+	   the 9th clock */
-+	timeout = 500;
-+	while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IIF))
-+		udelay(1);
-+	if (timeout <= 0)
-+		printk("%s - I2C IIF never set. Timeout is %d \n", __FUNCTION__, timeout);
-+
-+
-+check_rc:
-+	/* reset the interrupt bit */
-+	*MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF;
-+
-+	if (timeout <= 0)
-+		return -1;
-+	else
-+		return 0;
-+};
-+
-+
-+/*
-+ *  5282 SMBUS supporting functions
-+ */
-+
-+static s32 coldfire_i2c_access(struct i2c_adapter *adap, u16 addr,
-+			      unsigned short flags, char read_write,
-+			      u8 command, int size, union i2c_smbus_data *data)
-+{
-+	int rc = 0;
-+	u8 rxData, tempRxData[2];
-+
-+	switch (size) {
-+		case I2C_SMBUS_QUICK:
-+			rc = coldfire_i2c_start(read_write, addr, FIRST_START); 	/* generate START */
-+                        break;
-+		case I2C_SMBUS_BYTE:
-+			rc = coldfire_i2c_start(read_write, addr, FIRST_START);
-+			*MCF_I2C_I2CR |= MCF_I2C_I2CR_TXAK;     /*generate NA */
-+			if (read_write == I2C_SMBUS_WRITE)
-+				rc += coldfire_write_data(command);
-+			else {
-+				coldfire_read_data(&rxData, NACK);/*dummy read*/
-+				rc += coldfire_read_data(&rxData, NACK);
-+				data->byte = rxData;
-+			}
-+			*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK; /* reset ACK bit */
-+			break;
-+		case I2C_SMBUS_BYTE_DATA:
-+			rc = coldfire_i2c_start(I2C_SMBUS_WRITE, addr, FIRST_START);
-+			rc += coldfire_write_data(command);
-+			if (read_write == I2C_SMBUS_WRITE)
-+				rc += coldfire_write_data(data->byte);
-+			else {
-+				/* This is SMBus READ Byte Data Request. 
-+				   Perform REPEAT START */
-+				rc += coldfire_i2c_start(I2C_SMBUS_READ, addr, 
-+							 REPEAT_START);
-+				coldfire_read_data(&rxData, ACK);/* dummy read*/
-+				/* Disable Acknowledge, generate STOP after 
-+				   next byte transfer */
-+				rc += coldfire_read_data(&rxData, NACK);
-+				data->byte = rxData;
-+			}
-+			*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK;/* reset to normal ACk */
-+			break;
-+		case I2C_SMBUS_PROC_CALL:
-+        	case I2C_SMBUS_WORD_DATA:
-+			dev_info(&adap->dev, "size = I2C_SMBUS_WORD_DATA \n");
-+			rc = coldfire_i2c_start(I2C_SMBUS_WRITE, addr, 
-+						FIRST_START);
-+			rc += coldfire_write_data(command);
-+			if (read_write == I2C_SMBUS_WRITE) {
-+				rc += coldfire_write_data(data->word & 0x00FF);
-+				rc += coldfire_write_data((data->word & 0x00FF) >> 8);
-+			} else {
-+				/* This is SMBUS READ WORD request. 
-+				   Peform REPEAT START */
-+				rc += coldfire_i2c_start(I2C_SMBUS_READ, addr, 
-+							 REPEAT_START);
-+				coldfire_read_data(&rxData, ACK);/* dummy read*/
-+				/* Disable Acknowledge, generate STOP after 
-+				   next byte transfer */
-+				/* read the MS byte from the device */
-+				rc += coldfire_read_data(&rxData, NACK);
-+				tempRxData[1] = rxData;
-+				/* read the LS byte from the device */
-+				rc += coldfire_read_data(&rxData, NACK);
-+				tempRxData[0] = rxData;
-+				/* the host driver expect little endian 
-+				   convention. Swap the byte */
-+				data->word = (tempRxData[0] << 8)|tempRxData[1];
-+			}
-+			*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK;
-+			break;
-+		case I2C_SMBUS_BLOCK_DATA:
-+			/* Not done yet */
-+			break;
-+		default:
-+			printk("Unsupported I2C size \n");
-+			rc = -1;
-+			break;
-+	};
-+
-+	/* Generate a STOP and put I2C module into slave mode */
-+	*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MSTA;
-+
-+	/* restore interrupt */
-+	*MCF_I2C_I2CR |= MCF_I2C_I2CR_IIEN;
-+
-+	if (rc < 0)
-+		return -1;
-+	else
-+		return 0;
-+};
-+
-+
-+/*
-+ *  List the SMBUS functions supported by this I2C adaptor
-+ *  Also tell the I2C Subsystem that we are able of master_xfer()
-+ */
-+static u32 coldfire_func(struct i2c_adapter *adapter)
-+{
-+	return(I2C_FUNC_SMBUS_QUICK |
-+	       I2C_FUNC_SMBUS_BYTE |
-+	       I2C_FUNC_SMBUS_PROC_CALL |
-+	       I2C_FUNC_SMBUS_BYTE_DATA |
-+	       I2C_FUNC_SMBUS_WORD_DATA |
-+	       I2C_FUNC_I2C |
-+	       I2C_FUNC_SMBUS_BLOCK_DATA);
-+};
-+
-+static int coldfire_i2c_master(struct i2c_adapter *adap,struct i2c_msg *msgs,
-+	                       int num)
-+{
-+	u8 dummyRead;
-+	struct i2c_msg *p;
-+	int i, err = 0;
-+	int ic=0;
-+
-+	lastaddr = 0;
-+	lastop = 8;
-+
-+	/* disable the IRQ, we are doing polling */
-+	*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_IIEN;
-+
-+	dev_dbg(&adap->dev,"Num of actions: %d\n", num);
-+
-+	for (i = 0; !err && i < num; i++) {
-+		p = &msgs[i];
-+
-+
-+		if (!p->len)
-+		{
-+			dev_dbg(&adap->dev,"p->len == 0!\n");
-+			continue;
-+		}
-+		/*
-+		 * Generate a new Start, if the target address differs from 
-+		 * the last target, generate a stop in this case first
-+		 */
-+		if(p->addr != lastaddr)
-+		{
-+			err = coldfire_do_first_start(p->addr,p->flags);
-+			if(err)
-+			{
-+				dev_dbg(&adap->dev,"First Init failed!\n");
-+				break;
-+			}
-+		}
-+
-+		else if((p->flags & I2C_M_RD)  != lastop)
-+		{
-+			/*
-+			 * If the Operational Mode changed, we need to do this 
-+			 * here ...
-+			 */
-+			dev_dbg(&adap->dev,"%s(): Direction changed, was: %d; is now: %d\n", __FUNCTION__, lastop, p->flags & I2C_M_RD);
-+
-+			/* Last op was an read, now it's write: complete stop 
-+			   and reinit */
-+			if (lastop & I2C_M_RD)
-+			{
-+				dev_dbg(&adap->dev,"%s(): The device is in read state, we must reset!\n", __FUNCTION__);
-+				if((err = coldfire_do_first_start(p->addr,p->flags)))
-+					break;
-+			}
-+			else
-+			{
-+				dev_dbg(&adap->dev,"%s(): We switchted to read mode\n",__FUNCTION__);
-+				if((err = coldfire_i2c_start((p->flags & I2C_M_RD) ? I2C_SMBUS_READ : I2C_SMBUS_WRITE,
-+				          p->addr, REPEAT_START)))
-+					break;
-+			}
-+
-+			lastop = p->flags & I2C_M_RD;	/* Save the last op */
-+		}
-+
-+		if (p->flags & I2C_M_RD)
-+		{
-+			/*
-+			 * When ever we get here, a new session was activated, 
-+			 * so read a dummy byte
-+			 */
-+			coldfire_read_data(&dummyRead, ACK);
-+			/*
-+			 * read p->len -1 bytes with ACK to the slave,
-+			 * read the last byte without the ACK, to inform him 
-+			 * about the stop afterwards
-+			 */
-+			ic = 0;
-+			while(!err && (ic < p->len-1 ))
-+			{
-+				err = coldfire_read_data(p->buf+ic, ACK );
-+				ic++;
-+			}
-+			if(!err)
-+				err = coldfire_read_data(p->buf+ic, NACK);
-+			dev_dbg(&coldfire_adapter.dev,"read: %2x\n",p->buf[ic]);
-+		}
-+		else
-+		{
-+			if(p->len == 2)
-+				dev_dbg(&coldfire_adapter.dev,"writing: 0x %2x %2x\n", p->buf[0], p->buf[1]);
-+
-+			/*
-+			 * Write data to the slave
-+			 */
-+			for(ic=0; !err && ic < p->len; ic++)
-+			{
-+				err = coldfire_write_data(p->buf[ic]);
-+				if(err)
-+				{
-+					dev_dbg(&coldfire_adapter.dev, "Failed to write data\n");
-+				}
-+			}
-+		}
-+	}
-+
-+	/*
-+	 * Put the device into slave mode to enable the STOP Generation 
-+	 * (the RTC needs this)
-+	 */
-+	*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MSTA;
-+
-+	*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK;	/* reset the ACK bit */
-+
-+	/* restore interrupt */
-+	*MCF_I2C_I2CR |= MCF_I2C_I2CR_IIEN;
-+
-+	/* Return the number of messages processed, or the error code. */
-+	if (err == 0)
-+		err = num;
-+	return err;
-+}
-+
-+
-+/*
-+ *  Initalize the 5282 I2C module
-+ *  Disable the 5282 I2C interrupt capability. Just use callback
-+ */
-+
-+static int __init i2c_coldfire_init(void)
-+{
-+	int retval;
-+	u8  dummyRead;
-+
-+#if defined(CONFIG_M532x) || defined(CONFIG_M5445X)
-+	/*
-+	 * Initialize the GPIOs for I2C
-+	 */
-+	MCF_GPIO_PAR_FECI2C |= (0
-+    			    | MCF_GPIO_PAR_FECI2C_PAR_SDA(3)
-+    			    | MCF_GPIO_PAR_FECI2C_PAR_SCL(3));
-+#elif defined(CONFIG_M5253)
-+	{
-+	volatile u32 *reg;
-+	/* GPIO Bit 41 = SCL0, Bit 42 = SDA0 */
-+	reg = (volatile u32 *)(MCF_MBAR2 + MCFSIM2_GPIO1FUNC);
-+	*reg &= 0xFFFFF9FF;
-+	}
-+#else
-+	/* Initialize PASP0 and PASP1 to I2C functions, 5282 user guide 26-19 */
-+	/* Port AS Pin Assignment Register (PASPAR)		*/
-+	/*		PASPA1 = 11 = AS1 pin is I2C SDA	*/
-+	/*		PASPA0 = 11 = AS0 pin is I2C SCL	*/
-+	*MCF_GPIO_PASPAR |= 0x000F;		/* u16 declaration */
-+#endif
-+
-+
-+    	/* Set transmission frequency 0x15 = ~100kHz */
-+    	*MCF_I2C_I2FDR = 0x15;
-+
-+	/* set the 5282 I2C slave address though we never use it */
-+    	*MCF_I2C_I2ADR = 0x6A;
-+
-+    	/* Enable I2C module and if IBB is set, do the special initialzation */
-+	/* procedures as are documented at the 5282 User Guide page 24-11 */
-+    	*MCF_I2C_I2CR |= MCF_I2C_I2CR_IEN;
-+	if ((*MCF_I2C_I2SR & MCF_I2C_I2SR_IBB) == 1) {
-+		printk("%s - do special 5282 I2C init procedures \n", 
-+			__FUNCTION__);
-+		*MCF_I2C_I2CR = 0x00;
-+		*MCF_I2C_I2CR = 0xA0;
-+		dummyRead = *MCF_I2C_I2DR;
-+		*MCF_I2C_I2SR = 0x00;
-+		*MCF_I2C_I2CR = 0x00;
-+	}
-+
-+	/* default I2C mode is - slave and receive */
-+	*MCF_I2C_I2CR &= ~(MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_MTX);
-+
-+	coldfire_adapter.dev.parent = &platform_bus;
-+	retval = i2c_add_adapter(&coldfire_adapter);
-+
-+	if (retval < 0)
-+		printk("%s - return code is: %d \n", __FUNCTION__, retval);
-+
-+	return retval;
-+};
-+
-+
-+/*
-+ *  I2C module exit function
-+ */
-+
-+static void __exit i2c_coldfire_exit(void)
-+{
-+	/* disable I2C and Interrupt */
-+	*MCF_I2C_I2CR &= ~(MCF_I2C_I2CR_IEN | MCF_I2C_I2CR_IIEN);
-+	i2c_del_adapter(&coldfire_adapter);
-+
-+};
-+
-+
-+MODULE_AUTHOR("Derek CL Cheung <derek.cheung@sympatico.ca>");
-+MODULE_DESCRIPTION("MCF5282 I2C adaptor");
-+MODULE_LICENSE("GPL");
-+
-+module_init(i2c_coldfire_init);
-+module_exit(i2c_coldfire_exit);
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-mcf.h
-@@ -0,0 +1,75 @@
-+/*
-+    i2c-mcf.h - header file for i2c-mcf.c
-+
-+    Copyright (c) 2005, Derek CL Cheung <derek.cheung@sympatico.ca>
-+                                        <http://www3.sympatico.ca/derek.cheung>
-+
-+    Copyright (c) 2006-2007, emlix
-+			Sebastian Hess <sh@emlix.com>
-+
-+    Copyright (c) 2006-2007 Freescale Semiconductor, Inc
-+			Yaroslav Vinogradov <yaroslav.vinogradov@freescale.com>
-+			Matt Waddel <Matt.Waddel@freescale.com>
-+
-+    This program is free software; you can redistribute it and/or modify
-+    it under the terms of the GNU General Public License as published by
-+    the Free Software Foundation; either version 2 of the License, or
-+    (at your option) any later version.
-+
-+    This program is distributed in the hope that it will be useful,
-+    but WITHOUT ANY WARRANTY; without even the implied warranty of
-+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+    GNU General Public License for more details.
-+
-+    You should have received a copy of the GNU General Public License
-+    along with this program; if not, write to the Free Software
-+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+
-+    Changes:
-+    v0.1	26 March 2005
-+        	Initial Release - developed on uClinux with 2.6.9 kernel
-+    v0.2	29 May 2006
-+		Modified to be more generic and added support for
-+		i2c_master_xfer
-+*/
-+
-+
-+#ifndef __I2C_MCF_H__
-+#define __I2C_MCF_H__
-+
-+enum I2C_START_TYPE { FIRST_START, REPEAT_START };
-+enum I2C_ACK_TYPE { ACK, NACK};
-+
-+/* Function prototypes */
-+static u32 coldfire_func(struct i2c_adapter *adapter);
-+static s32 coldfire_i2c_access(struct i2c_adapter *adap, u16 address,
-+                              unsigned short flags, char read_write,
-+                              u8 command, int size, union i2c_smbus_data *data);
-+static int coldfire_write_data(const u8 data);
-+static int coldfire_i2c_start(const char read_write, const u16 target_address, const enum I2C_START_TYPE i2c_start);
-+static int coldfire_read_data(u8 * const rxData, const enum I2C_ACK_TYPE ackType);
-+static int coldfire_i2c_master(struct i2c_adapter *adap,struct i2c_msg *msgs, int num);
-+void dumpReg(char *, u16 addr, u8 data);
-+
-+#define MCF_I2C_I2ADR_ADDR(x)	(((x)&0x7F)<<0x01)
-+#define MCF_I2C_I2FDR_IC(x)	(((x)&0x3F))
-+
-+/* I2C Control Register */
-+#define MCF_I2C_I2CR_IEN	(0x80)	/* I2C enable */
-+#define MCF_I2C_I2CR_IIEN	(0x40)	/* interrupt enable */
-+#define MCF_I2C_I2CR_MSTA	(0x20)	/* master/slave mode */
-+#define MCF_I2C_I2CR_MTX	(0x10)	/* transmit/receive mode */
-+#define MCF_I2C_I2CR_TXAK	(0x08)	/* transmit acknowledge enable */
-+#define MCF_I2C_I2CR_RSTA	(0x04)	/* repeat start */
-+
-+/* I2C Status Register */
-+#define MCF_I2C_I2SR_ICF	(0x80)	/* data transfer bit */
-+#define MCF_I2C_I2SR_IAAS	(0x40)	/* I2C addressed as a slave */
-+#define MCF_I2C_I2SR_IBB	(0x20)	/* I2C bus busy */
-+#define MCF_I2C_I2SR_IAL	(0x10)	/* aribitration lost */
-+#define MCF_I2C_I2SR_SRW	(0x04)	/* slave read/write */
-+#define MCF_I2C_I2SR_IIF	(0x02)	/* I2C interrupt */
-+#define MCF_I2C_I2SR_RXAK	(0x01)	/* received acknowledge */
-+
-+/********************************************************************/
-+#endif /*  __I2C_MCF_H__ */
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -4,6 +4,18 @@
- 
- menu "I2C Hardware Bus support"
- 
-+config I2C_MCF548x
-+	tristate "I2C MCF547x/548x interfaces"
-+	depends on I2C
-+	help
-+	  This allows you to use the I2C adapters found on the Freescale
-+	  MCF547x/548x microcontrollers.
-+	  Say Y if you own an I2C adapter belonging to this class and then say
-+	  Y to the specific driver for you adapter below.
-+
-+	  This support is also available as a module.  If so, the module
-+	  will be called i2c-algo-mcf.
-+
- config I2C_ALI1535
- 	tristate "ALI 1535"
- 	depends on PCI
-@@ -290,6 +302,16 @@ config I2C_POWERMAC
- 	  This support is also available as a module.  If so, the module
- 	  will be called i2c-powermac.
- 
-+config I2C_MCF
-+	tristate "MCF ColdFire"
-+	depends on I2C && EXPERIMENTAL
-+	help
-+	  If you say yes to this option, support will be included for the
-+	  I2C on most ColdFire CPUs
-+
-+	  This driver can also be built as a module.  If so, the module
-+	  will be called i2c-mcf.
-+ 
- config I2C_MPC
- 	tristate "MPC107/824x/85xx/52xx/86xx"
- 	depends on PPC32
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -52,6 +52,8 @@ obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
- obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
- obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
- obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
-+obj-$(CONFIG_I2C_MCF548x)       += i2c-mcf548x.o
-+obj-$(CONFIG_I2C_MCF)		+= i2c-mcf.o
- 
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
- EXTRA_CFLAGS += -DDEBUG
---- a/drivers/macintosh/Kconfig
-+++ b/drivers/macintosh/Kconfig
-@@ -118,7 +118,6 @@ config PMAC_SMU
- 
- config PMAC_APM_EMU
- 	tristate "APM emulation"
--	select APM_EMULATION
- 	depends on ADB_PMU && PM && PPC32
- 
- config PMAC_MEDIABAY
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -93,3 +93,5 @@ obj-$(CONFIG_PPC_PS3)		+= ps3/
- obj-$(CONFIG_OF)		+= of/
- obj-$(CONFIG_SSB)		+= ssb/
- obj-$(CONFIG_VIRTIO)		+= virtio/
-+
-+obj-$(CONFIG_MCD_DMA)		+= dma/
---- /dev/null
-+++ b/drivers/net/can/flexcan/flexcan.c
-@@ -0,0 +1,378 @@
-+/*
-+ * flexcan.c
-+ *
-+ * DESCRIPTION:
-+ *  CAN bus driver for the alone generic (as possible as) FLEXCAN controller.
-+ *
-+ * AUTHOR:
-+ *  Andrey Volkov <avolkov@varma-el.com>
-+ *
-+ * COPYRIGHT:
-+ *  2005-2006, Varma Electronics Oy
-+ *
-+ * LICENCE:
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the Free Software
-+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ *  HISTORY:
-+ *  	2008-06-23 Support for MCF548x's FlexCAN
-+ * 			Huan, Wang <b18965@freescale.com>
-+ */
-+
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/netdevice.h>
-+#include <linux/if_arp.h>
-+#include <linux/if_ether.h>
-+#include <linux/can.h>
-+#include <linux/list.h>
-+#include <linux/io.h>
-+
-+#include <linux/can/dev.h>
-+#include <linux/can/error.h>
-+#include "flexcan.h"
-+#include <asm/coldfire.h>
-+#include <asm/m5485sim.h>
-+#include <linux/can/version.h>	/* for RCSID. Removed by mkpatch script */
-+RCSID("$Id$");
-+
-+struct flexcan_priv {
-+	struct can_priv can;
-+	volatile unsigned long flags;
-+	u8 shadow_statflg;
-+	u8 shadow_canrier;
-+	u8 cur_pri;
-+	u8 tx_active;
-+
-+	struct list_head tx_head;
-+	struct napi_struct napi;
-+	struct net_device *dev;
-+};
-+
-+
-+static int flexcan_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+	struct can_frame *frame = (struct can_frame *)skb->data;
-+	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
-+	int i, len;
-+	int txbuf = 0;
-+	u32 can_id, can_ext, tmp, tmp1;
-+
-+	/* Transmission inactive */
-+	regs->cantxfg[txbuf].can_dlc = MB_CNT_CODE(0x08);
-+
-+	can_ext = frame->can_id;
-+	if (can_ext & CAN_EFF_FLAG) {
-+		/* Frame format is extended */
-+		regs->cantxfg[txbuf].can_dlc |= (1 << 21);
-+		regs->cantxfg[txbuf].can_dlc |= (1 << 22);
-+		can_id = frame->can_id & MB_ID_EXT;
-+		if (frame->can_id & CAN_RTR_FLAG)
-+			regs->cantxfg[txbuf].can_dlc |= (1 << 20);
-+
-+		tmp = (can_id & CAN_SFF_MASK) << 18;
-+		tmp1 = can_id >> 11;
-+		can_id = tmp | tmp1;
-+		regs->cantxfg[txbuf].can_id = can_id;
-+	} else {
-+		/* Frame format is standard */
-+		can_id = frame->can_id & MB_ID_EXT;
-+		if (frame->can_id & CAN_RTR_FLAG)
-+			regs->cantxfg[txbuf].can_dlc |= (1 << 20);
-+
-+		regs->cantxfg[txbuf].can_id = can_id << 18;
-+	}
-+
-+	len = 8;
-+	for (i = 0; i < len; i++)
-+		regs->cantxfg[txbuf].data[i] = frame->data[i];
-+
-+	regs->cantxfg[txbuf].can_dlc |= len << 16;
-+	/* Transmission active */
-+	regs->cantxfg[txbuf].can_dlc |= MB_CNT_CODE(0x0c);
-+	kfree_skb(skb);
-+	return NETDEV_TX_OK;
-+}
-+
-+static void flexcan_tx_timeout(struct net_device *dev)
-+{
-+	struct sk_buff *skb;
-+	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
-+	struct can_frame *frame;
-+	int length = 8;
-+
-+	/* Diable the interrupts */
-+	regs->imask = IMASK_BUFF_DISABLE_ALL;
-+
-+	skb = dev_alloc_skb(sizeof(struct can_frame));
-+	if (!skb) {
-+		if (printk_ratelimit())
-+			dev_notice(ND2D(dev), "TIMEOUT packet dropped.\n");
-+		return;
-+	}
-+	frame = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
-+
-+	frame->can_dlc = length;
-+
-+	skb->dev = dev;
-+	skb->protocol = __constant_htons(ETH_P_CAN);
-+	skb->pkt_type = PACKET_BROADCAST;
-+	skb->ip_summed = CHECKSUM_UNNECESSARY;
-+
-+	netif_rx(skb);
-+}
-+
-+static irqreturn_t flexcan_isr(int irq, void *dev_id)
-+{
-+	struct net_device *dev = (struct net_device *)dev_id;
-+	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
-+	struct net_device_stats *stats = dev->get_stats(dev);
-+	struct sk_buff *skb;
-+	struct can_frame *frame;
-+	u32 iflags, oflags;
-+	int i, k;
-+	int retval = 1;
-+
-+	iflags = regs->iflag;
-+	oflags = iflags;
-+	for (i = 0; i < 16; i++) {
-+		if (iflags & (0x01 << i)) {
-+			struct flexcan_mb *mb = &regs->cantxfg[i];
-+			int ctrl = mb->can_dlc;
-+			int code = (ctrl >> 24) & 0x0f;
-+			int length = (ctrl >> 16) & 0x0f;
-+			u32 tmp, tmp1;
-+
-+			if (code < 8 && (length > 0)) {
-+				/* receive frame */
-+				skb = dev_alloc_skb(sizeof(struct can_frame));
-+				if (!skb)
-+					dev_notice(ND2D(dev),
-+							"Packets dropped.\n");
-+				skb->dev = dev;
-+				frame = (struct can_frame *)skb_put(skb,
-+						sizeof(struct can_frame));
-+
-+				frame->can_id &= 0x0;
-+				frame->can_dlc = length;
-+				tmp1 = mb->can_id & MB_ID_EXT;
-+				if (ctrl & MB_CNT_IDE) {
-+					tmp = tmp1;
-+					tmp = (tmp >> 18) & CAN_SFF_MASK;
-+					frame->can_id = (tmp1 << 11) | tmp;
-+					frame->can_id &= CAN_EFF_MASK;
-+					frame->can_id |= CAN_EFF_FLAG;
-+					if (ctrl & MB_CNT_RTR)
-+						frame->can_id |= CAN_RTR_FLAG;
-+				} else {
-+					frame->can_id  = tmp1 >> 18;
-+					if (ctrl & MB_CNT_RTR)
-+						frame->can_id |= CAN_RTR_FLAG;
-+				}
-+
-+				for (k = 0; k < 8; k++)
-+					frame->data[k] = mb->data[k];
-+
-+				mb->can_dlc &= MB_CODE_MASK;
-+				mb->can_dlc |= MB_CNT_CODE(0x04);
-+
-+				stats->rx_packets++;
-+				stats->rx_bytes += frame->can_dlc;
-+				skb->dev = dev;
-+				skb->protocol = __constant_htons(ETH_P_CAN);
-+				skb->ip_summed = CHECKSUM_UNNECESSARY;
-+
-+				retval = netif_rx(skb);
-+				if (retval == NET_RX_DROP)
-+					dev_notice(ND2D(dev),
-+							"Packets dropped.\n");
-+			} else {
-+				/* transmit frame */
-+				mb->can_dlc = MB_CNT_CODE(0x04);
-+			}
-+		}
-+	}
-+	regs->iflag = oflags;
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int flexcan_do_set_bit_time(struct net_device *dev,
-+				 struct can_bittime *bt)
-+{
-+	struct flexcan_priv *priv = netdev_priv(dev);
-+	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
-+	int ret = 0;
-+	u32 reg;
-+
-+	if (bt->type != CAN_BITTIME_STD)
-+		return -EINVAL;
-+
-+	spin_lock_irq(&priv->can.irq_lock);
-+
-+	reg = CANCTRL_PRESDIV(bt->std.brp) | CANCTRL_PSEG1(bt->std.phase_seg1
-+			- 1) | CANCTRL_PSEG2(bt->std.phase_seg2 - 1);
-+	regs->canctrl &= CANCTRL_BITTIME;
-+	regs->canctrl |= (reg | CANCTRL_SAMP(bt->std.sam) |
-+		CANCTRL_PROPSEG(bt->std.prop_seg - 1));
-+
-+	spin_unlock_irq(&priv->can.irq_lock);
-+	return ret;
-+}
-+
-+
-+static int flexcan_open(struct net_device *dev)
-+{
-+	int ret, i, j;
-+	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
-+
-+#if defined(CONFIG_M547X_8X)
-+	MCF_PAR_TIMER = MCF_PAR_TIMER | 0x28;
-+	MCF_PAR_TIMER = MCF_PAR_TIMER & 0xf8;
-+	MCF_PAR_DSPI = MCF_PAR_DSPI | 0x0a00;
-+	MCF_PAR_FECI2CIRQ = MCF_PAR_FECI2CIRQ | 0x0283;
-+	MCF_PAR_PSCn(2) = MCF_PAR_PSCn(2) & 0x0f;
-+	MCF_PAR_PSCn(2) = MCF_PAR_PSCn(2) | 0x50;
-+#endif
-+
-+	regs->canmcr |= CANMCR_SOFTRST;
-+	regs->canmcr |= CANMCR_MDIS;
-+	udelay(10);
-+
-+	if ((regs->canmcr & CANMCR_SOFTRST) != 0x0) {
-+		dev_err(ND2D(dev), "Failed to softreset can module.\n");
-+		return -1;
-+	}
-+
-+	/* Enable error and bus off interrupt */
-+	regs->canctrl |= (CANCTRL_RJW(3) | CANCTRL_ERRMSK |
-+			CANCTRL_BOFFMSK);
-+
-+	/* Set lowest buffer transmitted first */
-+	regs->canctrl |= CANCTRL_LBUF;
-+
-+	for (i = 0; i < 16; i++) {
-+		regs->cantxfg[i].can_dlc = 0;
-+		regs->cantxfg[i].can_id = 0;
-+		for (j = 0; j < 8; j++)
-+			regs->cantxfg[i].data[j] = 0;
-+
-+		/* Put MB into rx queue */
-+		regs->cantxfg[i].can_dlc = MB_CNT_CODE(0x04);
-+	}
-+
-+	/* acceptance mask/acceptance code (accept everything) */
-+	regs->rxgmask = 0x00000000;
-+	regs->rx14mask = 0x00000000;
-+	regs->rx15mask = 0x00000000;
-+	/* extended frame */
-+	regs->cantxfg[14].can_dlc |= 0x600000;
-+	/* Enable flexcan module */
-+	regs->canmcr &= ~CANMCR_MDIS;
-+	/* Synchronize with the can bus */
-+	regs->canmcr &= ~CANMCR_HALT;
-+
-+#if defined(CONFIG_M547X_8X)
-+	for (i = 0; i < 2; i++) {
-+		MCF_ICR(ISC_CANn_MBOR(i)) = 0x33;
-+		MCF_ICR(ISC_CANn_ERR(i)) = 0x33;
-+		MCF_ICR(ISC_CANn_BUSOFF(i)) = 0x33;
-+	}
-+
-+	ret = request_irq(dev->irq + 64, flexcan_isr, IRQF_DISABLED,
-+			dev->name, dev);
-+	ret = request_irq(dev->irq + 1 + 64, flexcan_isr, IRQF_DISABLED,
-+			dev->name, dev);
-+	ret = request_irq(dev->irq + 2 + 64, flexcan_isr, IRQF_DISABLED,
-+			dev->name, dev);
-+	if (ret < 0) {
-+		printk(KERN_ERR "%s - failed to attach interrupt.\n",
-+		       dev->name);
-+		return ret;
-+	}
-+#endif
-+
-+	/* Enable all interrupts */
-+	regs->imask = IMASK_BUFF_ENABLE_ALL;
-+	netif_start_queue(dev);
-+	return 0;
-+}
-+
-+static int flexcan_close(struct net_device *dev)
-+{
-+	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
-+
-+	netif_stop_queue(dev);
-+
-+	/* Disable all interrupts */
-+	regs->imask = IMASK_BUFF_DISABLE_ALL;
-+	free_irq(dev->irq + 64, dev);
-+	free_irq(dev->irq + 1 + 64, dev);
-+	free_irq(dev->irq + 2 + 64, dev);
-+
-+	/* Disable module */
-+	regs->canmcr |= CANMCR_MDIS;
-+	return 0;
-+}
-+
-+int register_flexcandev(struct net_device *dev, int clock_src)
-+{
-+	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
-+
-+	regs->canmcr &= ~CANMCR_MDIS;
-+	udelay(100);
-+	regs->canmcr |= (CANMCR_FRZ | CANMCR_HALT);
-+	return register_netdev(dev);
-+}
-+EXPORT_SYMBOL(register_flexcandev);
-+
-+void unregister_flexcandev(struct net_device *dev)
-+{
-+	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
-+
-+	regs->canmcr |= (CANMCR_FRZ | CANMCR_HALT);
-+	regs->canmcr |= CANMCR_MDIS;
-+
-+	unregister_netdev(dev);
-+}
-+EXPORT_SYMBOL(unregister_flexcandev);
-+
-+struct net_device *alloc_flexcandev(void)
-+{
-+	struct net_device *dev;
-+	struct flexcan_priv *priv;
-+
-+	dev = alloc_candev(sizeof(struct flexcan_priv));
-+	if (!dev)
-+		return NULL;
-+
-+	priv = netdev_priv(dev);
-+	priv->dev = dev;
-+	dev->open = flexcan_open;
-+	dev->stop = flexcan_close;
-+	dev->hard_start_xmit = flexcan_hard_start_xmit;
-+	dev->tx_timeout = flexcan_tx_timeout;
-+	dev->flags |= IFF_NOARP;
-+	priv->can.do_set_bit_time = flexcan_do_set_bit_time;
-+	return dev;
-+}
-+EXPORT_SYMBOL(alloc_flexcandev);
-+
-+MODULE_AUTHOR("Andrey Volkov <avolkov@varma-el.com>");
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("CAN port driver for flexcan based chip");
---- /dev/null
-+++ b/drivers/net/can/flexcan/flexcan.h
-@@ -0,0 +1,148 @@
-+/*
-+ * flexcan.h
-+ *
-+ * DESCRIPTION:
-+ *  Definitions of consts/structs to drive the Freescale FLEXCAN.
-+ *
-+ */
-+
-+#ifndef __FLEXCAN_H__
-+#define __FLEXCAN_H__
-+
-+#include <linux/autoconf.h>
-+#include <linux/types.h>
-+
-+/* FLEXCAN module configuration register (CANMCR) bits */
-+#define CANMCR_MDIS				0x80000000
-+#define CANMCR_FRZ				0x40000000
-+#define CANMCR_HALT				0x10000000
-+#define CANMCR_SOFTRST				0x02000000
-+#define CANMCR_FRZACK				0x01000000
-+#define CANMCR_SUPV				0x00800000
-+#define CANMCR_MAXMB(x)				((x)&0x0f)
-+
-+/* FLEXCAN control register (CANCTRL) bits */
-+#define CANCTRL_PRESDIV(x)			(((x)&0xff)<<24)
-+#define CANCTRL_RJW(x)				(((x)&0x03)<<22)
-+#define CANCTRL_PSEG1(x)			(((x)&0x07)<<19)
-+#define CANCTRL_PSEG2(x)			(((x)&0x07)<<16)
-+#define CANCTRL_BOFFMSK				0x00008000
-+#define CANCTRL_ERRMSK				0x00004000
-+#define CANCTRL_LPB				0x00001000
-+#define CANCTRL_SAMP(x)				(((x)&0x1)<<7)
-+#define CANCTRL_BOFFREC				0x00000040
-+#define CANCTRL_TSYNC				0x00000020
-+#define CANCTRL_LBUF				0x00000010
-+#define CANCTRL_LOM				0x00000008
-+#define CANCTRL_PROPSEG(x)			((x)&0x07)
-+#define CANCTRL_BITTIME				0x00c0d078
-+
-+/* FLEXCAN error counter register (ERRCNT) bits */
-+#define ERRCNT_REXECTR(x)			(((x)&0xff)<<8)
-+#define ERRCNT_TXECTR(x)			((x)&0xff)
-+
-+/* FLEXCAN error and status register (ERRSTAT) bits */
-+#define ERRSTAT_BITERR(x)			(((x)&0x03)<<14)
-+#define ERRSTAT_ACKERR				0x00002000
-+#define ERRSTAT_CRCERR				0x00001000
-+#define ERRSTAT_FRMERR				0x00000800
-+#define ERRSTAT_STFERR				0x00000400
-+#define ERRSTAT_TXWRN				0x00000200
-+#define ERRSTAT_RXWRN				0x00000100
-+#define ERRSTAT_IDLE 				0x00000080
-+#define ERRSTAT_TXRX				0x00000040
-+#define ERRSTAT_FLTCONF(x)			(((x)&0x03)<<4)
-+#define ERRSTAT_BOFFINT				0x00000004
-+#define ERRSTAT_ERRINT          		0x00000002
-+
-+/* FLEXCAN interrupt mask register (IMASK) bits */
-+#define IMASK_BUF15M				0x8000
-+#define IMASK_BUF14M				0x4000
-+#define IMASK_BUF13M				0x2000
-+#define IMASK_BUF12M				0x1000
-+#define IMASK_BUF11M				0x0800
-+#define IMASK_BUF10M				0x0400
-+#define IMASK_BUF9M				0x0200
-+#define IMASK_BUF8M				0x0100
-+#define IMASK_BUF7M				0x0080
-+#define IMASK_BUF6M				0x0040
-+#define IMASK_BUF5M				0x0020
-+#define IMASK_BUF4M				0x0010
-+#define IMASK_BUF3M				0x0008
-+#define IMASK_BUF2M				0x0004
-+#define IMASK_BUF1M				0x0002
-+#define IMASK_BUF0M				0x0001
-+#define IMASK_BUFnM(x)				(0x1<<(x))
-+#define IMASK_BUFF_ENABLE_ALL			0xffff
-+#define IMASK_BUFF_DISABLE_ALL 			0x0000
-+
-+/* FLEXCAN interrupt flag register (IFLAG) bits */
-+#define IFLAG_BUF15M				0x8000
-+#define IFLAG_BUF14M				0x4000
-+#define IFLAG_BUF13M				0x2000
-+#define IFLAG_BUF12M				0x1000
-+#define IFLAG_BUF11M				0x0800
-+#define IFLAG_BUF10M				0x0400
-+#define IFLAG_BUF9M				0x0200
-+#define IFLAG_BUF8M				0x0100
-+#define IFLAG_BUF7M				0x0080
-+#define IFLAG_BUF6M				0x0040
-+#define IFLAG_BUF5M				0x0020
-+#define IFLAG_BUF4M				0x0010
-+#define IFLAG_BUF3M				0x0008
-+#define IFLAG_BUF2M				0x0004
-+#define IFLAG_BUF1M				0x0002
-+#define IFLAG_BUF0M				0x0001
-+#define IFLAG_BUFnM(x)				(0x1<<(x))
-+#define IFLAG_BUFF_SET_ALL			0xffff
-+#define IFLAG_BUFF_DISABLE_ALL 			0x0000
-+
-+/* FLEXCAN message buffers */
-+#define MB_CNT_CODE(x)				(((x)&0x0f)<<24)
-+#define MB_CNT_SRR				0x00400000
-+#define MB_CNT_IDE				0x00200000
-+#define MB_CNT_RTR				0x00100000
-+#define MB_CNT_LENGTH(x)			(((x)&0x0f)<<16)
-+#define MB_CNT_TIMESTAMP(x)			((x)&0xffff)
-+
-+#define MB_ID_STD				((0x7ff)<<18)
-+#define MB_ID_EXT				0x1fffffff
-+#define MB_CODE_MASK				0xf0ffffff
-+
-+/* Structure of the message buffer */
-+struct flexcan_mb {
-+	u32	can_dlc;
-+	u32	can_id;
-+	u8	data[8];
-+};
-+
-+/* Structure of the hardware registers */
-+struct flexcan_regs {
-+	u32	canmcr;
-+	u32	canctrl;
-+	u32	timer;
-+	u32	reserved1;
-+	u32 	rxgmask;
-+	u32 	rx14mask;
-+	u32 	rx15mask;
-+	u32	errcnt;
-+	u32 	errstat;
-+	u32	reserved2;
-+	u32	imask;
-+	u32	reserved3;
-+	u32 	iflag;
-+	u32	reserved4[19];
-+	struct	flexcan_mb cantxfg[16];
-+};
-+
-+struct flexcan_platform_data {
-+	u8 clock_src;		/* FLEXCAN clock source CRIN or SYSCLK */
-+	u32 clock_frq;		/* can ref. clock, in Hz */
-+};
-+
-+struct net_device *alloc_flexcandev(void);
-+
-+extern int register_flexcandev(struct net_device *dev, int clock_src);
-+extern void unregister_flexcandev(struct net_device *dev);
-+
-+#endif				/* __FLEXCAN_H__ */
---- /dev/null
-+++ b/drivers/net/can/flexcan/Makefile
-@@ -0,0 +1,5 @@
-+
-+obj-$(CONFIG_CAN_MCF547X_8X)	+= flexcan-mcf548x.o
-+
-+flexcan-mcf548x-objs	:= flexcan.o mcf548x_can.o
-+
---- /dev/null
-+++ b/drivers/net/can/flexcan/mcf548x_can.c
-@@ -0,0 +1,213 @@
-+/*
-+ * DESCRIPTION:
-+ *  CAN bus driver for the Freescale MCF548x embedded CPU.
-+ *
-+ * AUTHOR:
-+ *  Andrey Volkov <avolkov@varma-el.com>
-+ *
-+ * COPYRIGHT:
-+ *  2004-2005, Varma Electronics Oy
-+ *
-+ * LICENCE:
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the Free Software
-+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ * HISTORY:
-+ * 	2008-06-23 support for MCF548x's FlexCAN
-+ * 		Huan, Wang  <b18965@freescale.com>
-+ * 	2005-02-03 created
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/netdevice.h>
-+#include <linux/can.h>
-+#include <linux/can/dev.h>
-+#include <linux/io.h>
-+
-+#include "flexcan.h"
-+#include <asm/coldfire.h>
-+#include <asm/m5485sim.h>
-+#include <linux/can/version.h>	/* for RCSID. Removed by mkpatch script */
-+
-+RCSID("$Id$");
-+
-+#define PDEV_MAX 2
-+
-+struct platform_device *pdev[PDEV_MAX];
-+
-+static int __devinit mcf548x_can_probe(struct platform_device *pdev)
-+{
-+	struct resource *mem;
-+	struct net_device *dev;
-+	struct flexcan_platform_data *pdata = pdev->dev.platform_data;
-+	struct can_priv *can;
-+	u32 mem_size;
-+	int ret = -ENODEV;
-+
-+	if (!pdata)
-+		return ret;
-+
-+	dev = alloc_flexcandev();
-+	if (!dev)
-+		return -ENOMEM;
-+	can = netdev_priv(dev);
-+
-+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+	dev->irq = platform_get_irq(pdev, 0);
-+	if (!mem || !dev->irq)
-+		goto req_error;
-+
-+	mem_size = mem->end - mem->start + 1;
-+	if (!request_mem_region(mem->start, mem_size, pdev->dev.driver->name)) {
-+		dev_err(&pdev->dev, "resource unavailable\n");
-+		goto req_error;
-+	}
-+	SET_NETDEV_DEV(dev, &pdev->dev);
-+
-+	dev->base_addr = (unsigned long)ioremap_nocache(mem->start, mem_size);
-+	if (!dev->base_addr) {
-+		dev_err(&pdev->dev, "failed to map can port\n");
-+		ret = -ENOMEM;
-+		goto fail_map;
-+	}
-+	can->can_sys_clock = pdata->clock_frq;
-+	platform_set_drvdata(pdev, dev);
-+	ret = register_flexcandev(dev, pdata->clock_src);
-+	if (ret >= 0) {
-+		dev_info(&pdev->dev, "probe for port 0x%lX done\n",
-+			 dev->base_addr);
-+		return ret;
-+	}
-+
-+	iounmap((unsigned long *)dev->base_addr);
-+fail_map:
-+	release_mem_region(mem->start, mem_size);
-+req_error:
-+	free_candev(dev);
-+	dev_err(&pdev->dev, "probe failed\n");
-+	return ret;
-+}
-+
-+static int __devexit mcf548x_can_remove(struct platform_device *pdev)
-+{
-+	struct net_device *dev = platform_get_drvdata(pdev);
-+	struct resource *mem;
-+
-+	platform_set_drvdata(pdev, NULL);
-+	unregister_flexcandev(dev);
-+	iounmap((unsigned long *)dev->base_addr);
-+
-+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	release_mem_region(mem->start, mem->end - mem->start + 1);
-+	free_candev(dev);
-+	return 0;
-+}
-+
-+static struct platform_driver mcf548x_can_driver = {
-+	.driver = {
-+		   .name = "mcf548x-flexcan",
-+		   },
-+	.probe = mcf548x_can_probe,
-+	.remove = __devexit_p(mcf548x_can_remove),
-+};
-+
-+static struct resource mcf548x_can0_resources[] = {
-+	[0] = {
-+		.start 		= MCF_MBAR + 0x0000A000,
-+		.end		= MCF_MBAR + 0x0000A7FF,
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start		= 49,
-+		.end		= 49,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct resource mcf548x_can1_resources[] = {
-+	[0] = {
-+		.start 		= MCF_MBAR + 0x0000A800,
-+		.end		= MCF_MBAR + 0x0000AFFF,
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start		= 55,
-+		.end		= 55,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+
-+static int __init mcf548x_of_to_pdev(void)
-+{
-+	unsigned int i;
-+	int err = -ENODEV;
-+	struct flexcan_platform_data pdata;
-+
-+	pdev[0] = platform_device_register_simple("mcf548x-flexcan", 0,
-+			mcf548x_can0_resources, 2);
-+	if (IS_ERR(pdev[0])) {
-+		err = PTR_ERR(pdev[0]);
-+		return err;
-+	}
-+	pdev[1] = platform_device_register_simple("mcf548x-flexcan", 1,
-+			mcf548x_can1_resources, 2);
-+	if (IS_ERR(pdev[1])) {
-+		err = PTR_ERR(pdev[1]);
-+		return err;
-+	}
-+
-+	/* FlexCAN clock */
-+	pdata.clock_frq = 100000000;
-+
-+	for (i = 0; i < PDEV_MAX; i++) {
-+		err = platform_device_add_data(pdev[i], &pdata, sizeof(pdata));
-+		if (err)
-+			return err;
-+	}
-+	return err;
-+}
-+
-+int __init mcf548x_can_init(void)
-+{
-+	int err = mcf548x_of_to_pdev();
-+
-+	if (err) {
-+		printk(KERN_ERR "%s init failed with err=%d\n",
-+			mcf548x_can_driver.driver.name, err);
-+		return err;
-+	}
-+
-+	return platform_driver_register(&mcf548x_can_driver);
-+}
-+
-+void __exit mcf548x_can_exit(void)
-+{
-+	int i;
-+	platform_driver_unregister(&mcf548x_can_driver);
-+	for (i = 0; i < PDEV_MAX; i++)
-+		platform_device_unregister(pdev[i]);
-+}
-+
-+module_init(mcf548x_can_init);
-+module_exit(mcf548x_can_exit);
-+
-+MODULE_AUTHOR("Andrey Volkov <avolkov@varma-el.com>");
-+MODULE_DESCRIPTION("Freescale MCF548x CAN driver");
-+MODULE_LICENSE("GPL v2");
---- a/drivers/net/can/Kconfig
-+++ b/drivers/net/can/Kconfig
-@@ -12,6 +12,19 @@ config CAN_VCAN
- 	  This driver can also be built as a module.  If so, the module
- 	  will be called vcan.
- 
-+config CAN_FLEXCAN
-+	tristate "Support for Freescale FLEXCAN based chips"
-+	depends on CAN && (PPC || M68K || M68KNOMMU)
-+	---help---
-+	  Say Y here if you want to support for Freescale FlexCAN.
-+
-+config CAN_MCF547X_8X
-+	tristate "Freescale MCF547X/MCF548X onboard CAN controller"
-+	depends on CAN_FLEXCAN && (M547X || M548X)
-+	---help---
-+	  Say Y here if you want to support for Freescale MCF547x/MCF548x
-+	  onboard dualCAN controller.
-+
- config CAN_DEBUG_DEVICES
- 	bool "CAN devices debugging messages"
- 	depends on CAN
---- a/drivers/net/can/Makefile
-+++ b/drivers/net/can/Makefile
-@@ -3,3 +3,4 @@
- #
- 
- obj-$(CONFIG_CAN_VCAN)		+= vcan.o
-+obj-$(CONFIG_CAN_FLEXCAN)	+= flexcan/
---- /dev/null
-+++ b/drivers/net/fec/fec.c
-@@ -0,0 +1,1306 @@
-+/*
-+ * Performance and stability improvements: (C) Copyright 2008,
-+ *      Daniel Krueger, SYSTEC electronic GmbH
-+ *
-+ * Code crunched to get it to work on 2.6.24 -- FEC cleanup coming
-+ * soon -- Kurt Mahan
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/ptrace.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/spinlock.h>
-+#include <linux/workqueue.h>
-+#include <linux/bitops.h>
-+
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+
-+#include <asm/dma.h>
-+#include <asm/MCD_dma.h>
-+#include <asm/m5485sram.h>
-+#include <asm/virtconvert.h>
-+#include <asm/irq.h>
-+
-+#include "fec.h"
-+#include "ks8721.h"
-+
-+#ifdef	CONFIG_FEC_548x_ENABLE_FEC2
-+#define	FEC_MAX_PORTS	2
-+#define	FEC_2
-+#else
-+#define	FEC_MAX_PORTS	1
-+#undef	FEC_2
-+#endif
-+
-+#define VERSION "0.20"
-+MODULE_DESCRIPTION( "DMA Fast Ethernet Controller driver ver " VERSION);
-+
-+/* fec private */
-+struct fec_priv {
-+	struct net_device *netdev;		/* owning net device */
-+	void* fecpriv_txbuf[FEC_TX_BUF_NUMBER];	/* tx buffer ptrs */
-+	MCD_bufDescFec *fecpriv_txdesc;		/* tx descriptor ptrs */
-+	volatile unsigned int fecpriv_current_tx; /* current tx desc index */
-+	volatile unsigned int fecpriv_next_tx;	/* next tx desc index */
-+	unsigned int fecpriv_current_rx;	/* current rx desc index */
-+	MCD_bufDescFec *fecpriv_rxdesc;		/* rx descriptor ptrs */
-+	struct sk_buff *askb_rx[FEC_RX_BUF_NUMBER]; /* rx SKB ptrs */
-+	unsigned int fecpriv_initiator_rx;	/* rx dma initiator */
-+	unsigned int fecpriv_initiator_tx;	/* tx dma initiator */
-+	int fecpriv_fec_rx_channel;		/* rx dma channel */
-+	int fecpriv_fec_tx_channel;		/* tx dma channel */
-+	int fecpriv_rx_requestor;		/* rx dma requestor */
-+	int fecpriv_tx_requestor;		/* tx dma requestor */
-+	void *fecpriv_interrupt_fec_rx_handler;	/* dma rx handler */
-+	void *fecpriv_interrupt_fec_tx_handler;	/* dma tx handler */
-+	unsigned char *fecpriv_mac_addr;	/* private fec mac addr */
-+	struct net_device_stats fecpriv_stat;	/* stats ptr */
-+	spinlock_t fecpriv_lock;
-+	int fecpriv_rxflag;
-+	struct tasklet_struct fecpriv_tasklet_reinit;
-+	int index;				/* fec hw number */
-+};
-+
-+struct net_device *fec_dev[FEC_MAX_PORTS];
-+
-+/* FEC functions */
-+int __init fec_init(void);
-+struct net_device_stats *fec_get_stat(struct net_device *dev);
-+int fec_open(struct net_device *dev);
-+int fec_close(struct net_device *nd);
-+int fec_tx(struct sk_buff *skb, struct net_device *dev);
-+void fec_set_multicast_list(struct net_device *nd);
-+int fec_set_mac_address(struct net_device *dev, void *p);
-+void fec_tx_timeout(struct net_device *dev);
-+void fec_interrupt_fec_tx_handler(struct net_device *dev);
-+void fec_interrupt_fec_rx_handler(struct net_device *dev);
-+irqreturn_t fec_interrupt_handler(int irq, void *dev_id);
-+void fec_interrupt_fec_tx_handler_fec0(void);
-+void fec_interrupt_fec_rx_handler_fec0(void);
-+void fec_interrupt_fec_reinit(unsigned long data);
-+
-+/* default fec0 address */
-+unsigned char fec_mac_addr_fec0[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x50 };
-+
-+#ifdef   FEC_2
-+/* default fec1 address */
-+unsigned char fec_mac_addr_fec1[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x51 };
-+#endif
-+
-+extern unsigned char uboot_enet0[];
-+extern unsigned char uboot_enet1[];
-+
-+#ifndef MODULE
-+int fec_str_to_mac( char *str_mac, unsigned char* addr);
-+int __init fec_mac_setup0 (char *s);
-+#endif
-+
-+
-+#ifdef   FEC_2
-+void fec_interrupt_fec_tx_handler_fec1(void);
-+void fec_interrupt_fec_rx_handler_fec1(void);
-+#endif
-+
-+#ifndef MODULE
-+int __init fec_mac_setup1 (char *s);
-+#endif
-+
-+int fec_read_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int *data);
-+int fec_write_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int data);
-+
-+module_init(fec_init);
-+/* module_exit(fec_cleanup); */
-+
-+__setup("mac0=", fec_mac_setup0);
-+
-+#ifdef   FEC_2
-+__setup("mac1=", fec_mac_setup1);
-+#endif
-+
-+/*
-+ * Initialize a FEC device
-+ */
-+int fec_enet_init(struct net_device *dev)
-+{
-+	static int index = 0;
-+	struct fec_priv *fp = netdev_priv(dev);
-+	int i;
-+
-+	fp->index = index;
-+	fp->netdev = dev;
-+	fec_dev[ index ] = dev;
-+
-+	if (index == 0) {
-+		/* disable fec0 */
-+		FEC_ECR(FEC_BASE_ADDR_FEC0) = FEC_ECR_DISABLE;
-+
-+		/* setup the interrupt handler */
-+		dev->irq = 64 + ISC_FEC0;
-+
-+		if (request_irq(dev->irq, fec_interrupt_handler,
-+		                IRQF_DISABLED, "ColdFire FEC 0", dev)) {
-+			dev->irq = 0;
-+			printk("Cannot allocate FEC0 IRQ\n");
-+		} else {
-+			/* interrupt priority and level */
-+			MCF_ICR(ISC_FEC0) = ILP_FEC0;
-+		}
-+
-+		/* fec base address */
-+		dev->base_addr = FEC_BASE_ADDR_FEC0;
-+
-+		/* requestor numbers */
-+		fp->fecpriv_rx_requestor = DMA_FEC0_RX;
-+		fp->fecpriv_tx_requestor = DMA_FEC0_TX;
-+
-+		/* fec0 handlers */
-+		fp->fecpriv_interrupt_fec_rx_handler = fec_interrupt_fec_rx_handler_fec0;
-+		fp->fecpriv_interrupt_fec_tx_handler = fec_interrupt_fec_tx_handler_fec0;
-+
-+		/* tx descriptors */
-+		fp->fecpriv_txdesc = (void*)FEC_TX_DESC_FEC0;
-+
-+		/* rx descriptors */
-+		fp->fecpriv_rxdesc = (void*)FEC_RX_DESC_FEC0;
-+
-+		/* mac addr */
-+		if (uboot_enet0[0] || uboot_enet0[1] || uboot_enet0[2] ||
-+		    uboot_enet0[3] || uboot_enet0[4] || uboot_enet0[5]) {
-+			/* use uboot enet 0 addr */
-+			memcpy(fec_mac_addr_fec0, uboot_enet0, 6);
-+		}
-+
-+		fp->fecpriv_mac_addr = fec_mac_addr_fec0;
-+	}
-+	else {
-+		/* disable fec1 */
-+		FEC_ECR(FEC_BASE_ADDR_FEC1) = FEC_ECR_DISABLE;
-+#ifdef FEC_2
-+		/* setup the interrupt handler */
-+		dev->irq = 64 + ISC_FEC1;
-+
-+		if (request_irq(dev->irq, fec_interrupt_handler,
-+		                IRQF_DISABLED, "ColdFire FEC 1", dev)) {
-+			dev->irq = 0;
-+			printk("Cannot allocate FEC1 IRQ\n");
-+		} else {
-+			/* interrupt priority and level */
-+			MCF_ICR(ISC_FEC1) = ILP_FEC1;
-+		}
-+
-+		/* fec base address */
-+		dev->base_addr = FEC_BASE_ADDR_FEC1;
-+
-+		/* requestor numbers */
-+		fp->fecpriv_rx_requestor = DMA_FEC1_RX;
-+		fp->fecpriv_tx_requestor = DMA_FEC1_TX;
-+
-+		/* fec1 handlers */
-+		fp->fecpriv_interrupt_fec_rx_handler = fec_interrupt_fec_rx_handler_fec1;
-+		fp->fecpriv_interrupt_fec_tx_handler = fec_interrupt_fec_tx_handler_fec1;
-+
-+		/* tx descriptors */
-+		fp->fecpriv_txdesc = (void*)FEC_TX_DESC_FEC1;
-+
-+		/* rx descriptors */
-+		fp->fecpriv_rxdesc = (void*)FEC_RX_DESC_FEC1;
-+
-+		/* mac addr */
-+		if (uboot_enet1[0] || uboot_enet1[1] || uboot_enet1[2] ||
-+		    uboot_enet1[3] || uboot_enet1[4] || uboot_enet1[5]) {
-+			/* use uboot enet 1 addr */
-+			memcpy(fec_mac_addr_fec1, uboot_enet1, 6);
-+		}
-+		fp->fecpriv_mac_addr = fec_mac_addr_fec1;
-+#endif
-+	}
-+
-+	/* clear MIB */
-+	memset((void *) (dev->base_addr + 0x200), 0, FEC_MIB_LEN);
-+
-+	/* clear the statistics structure */
-+	memset((void *) &(fp->fecpriv_stat), 0,
-+	       sizeof(struct net_device_stats));
-+
-+	/* grab the FEC initiators */
-+	dma_set_initiator(fp->fecpriv_tx_requestor);
-+	fp->fecpriv_initiator_tx = dma_get_initiator(fp->fecpriv_tx_requestor);
-+	dma_set_initiator(fp->fecpriv_rx_requestor);
-+	fp->fecpriv_initiator_rx = dma_get_initiator(fp->fecpriv_rx_requestor);
-+
-+	/* reset the DMA channels */
-+	fp->fecpriv_fec_rx_channel = -1;
-+	fp->fecpriv_fec_tx_channel = -1;
-+
-+	for (i = 0; i < FEC_RX_BUF_NUMBER; i++)
-+		fp->askb_rx[i] = NULL;
-+
-+	/* initialize the pointers to the socket buffers */
-+	for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
-+		fp->fecpriv_txbuf[i] = NULL;
-+
-+	ether_setup(dev);
-+
-+	dev->open = fec_open;
-+	dev->stop = fec_close;
-+	dev->hard_start_xmit = fec_tx;
-+	dev->get_stats = fec_get_stat;
-+	dev->set_multicast_list = fec_set_multicast_list;
-+	dev->set_mac_address = fec_set_mac_address;
-+	dev->tx_timeout = fec_tx_timeout;
-+	dev->watchdog_timeo = FEC_TX_TIMEOUT * HZ;
-+
-+	memcpy(dev->dev_addr, fp->fecpriv_mac_addr, ETH_ALEN);
-+
-+	spin_lock_init(&fp->fecpriv_lock);
-+
-+	// Initialize FEC/I2C/IRQ Pin Assignment Register
-+	FEC_GPIO_PAR_FECI2CIRQ &= 0xF;
-+	FEC_GPIO_PAR_FECI2CIRQ |= FEC_FECI2CIRQ;
-+
-+	index++;
-+	return 0;
-+}
-+
-+/*
-+ * Module Initialization
-+ */
-+int __init fec_init(void)
-+{
-+	struct net_device *dev;
-+	int i;
-+	int err;
-+	DECLARE_MAC_BUF(mac);
-+
-+	printk(KERN_INFO "FEC ENET (DMA) Version %s\n", VERSION);
-+
-+	for (i = 0; i < FEC_MAX_PORTS; i++) {
-+		dev = alloc_etherdev(sizeof(struct fec_priv));
-+		if (!dev)
-+			return -ENOMEM;
-+		err = fec_enet_init(dev);
-+		if (err) {
-+			free_netdev(dev);
-+			continue;
-+		}
-+		if (register_netdev(dev) != 0) {
-+			free_netdev(dev);
-+			return -EIO;
-+		}
-+
-+		printk(KERN_INFO "%s: ethernet %s\n",
-+		       dev->name, print_mac(mac, dev->dev_addr));
-+	}
-+	return 0;
-+}
-+
-+/*
-+ * Stop a device
-+ */
-+void fec_stop(struct net_device *dev)
-+{
-+	struct fec_priv *fp = netdev_priv(dev);
-+
-+	dma_remove_initiator(fp->fecpriv_initiator_tx);
-+	dma_remove_initiator(fp->fecpriv_initiator_rx);
-+
-+	if (dev->irq)
-+		free_irq(dev->irq, dev);
-+}
-+
-+/************************************************************************
-+* NAME: fec_open
-+*
-+* DESCRIPTION: This function performs the initialization of
-+*				of FEC and corresponding KS8721 transiver
-+*
-+* RETURNS: If no error occurs, this function returns zero.
-+*************************************************************************/
-+int fec_open(struct net_device *dev)
-+{
-+	struct fec_priv *fp = netdev_priv(dev);
-+	unsigned long base_addr = (unsigned long) dev->base_addr;
-+	int fduplex;
-+	int i;
-+	int channel;
-+	int error_code = -EBUSY;
-+
-+	/* Receive the DMA channels */
-+	channel = dma_set_channel_fec(fp->fecpriv_rx_requestor);
-+
-+	if (channel == -1) {
-+		printk("Dma channel cannot be reserved\n");
-+		goto ERRORS;
-+	}
-+
-+	fp->fecpriv_fec_rx_channel = channel;
-+
-+	dma_connect(channel, (int) fp->fecpriv_interrupt_fec_rx_handler);
-+
-+	channel = dma_set_channel_fec(fp->fecpriv_tx_requestor);
-+
-+	if (channel == -1) {
-+		printk("Dma channel cannot be reserved\n");
-+		goto ERRORS;
-+	}
-+
-+	fp->fecpriv_fec_tx_channel = channel;
-+
-+	dma_connect(channel, (int) fp->fecpriv_interrupt_fec_tx_handler);
-+
-+	/* init tasklet for controller reinitialization */
-+	tasklet_init(&fp->fecpriv_tasklet_reinit, fec_interrupt_fec_reinit, (unsigned long) dev);
-+
-+	/* Reset FIFOs */
-+	FEC_FECFRST(base_addr) |= FEC_SW_RST | FEC_RST_CTL;
-+	FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
-+
-+	/* Reset and disable FEC */
-+	FEC_ECR(base_addr) = FEC_ECR_RESET;
-+
-+	udelay(10);
-+
-+	/* Clear all events */
-+	FEC_EIR(base_addr) = FEC_EIR_CLEAR;
-+
-+	/* Reset FIFO status */
-+	FEC_FECTFSR(base_addr) = FEC_FECTFSR_MSK;
-+	FEC_FECRFSR(base_addr) = FEC_FECRFSR_MSK;
-+
-+	/* Set the default address */
-+	FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) |
-+			      (fp->fecpriv_mac_addr[1] << 16) |
-+			      (fp->fecpriv_mac_addr[2] << 8) |
-+			      fp->fecpriv_mac_addr[3];
-+	FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) |
-+			      (fp->fecpriv_mac_addr[5] << 16) | 0x8808;
-+
-+	/* Reset the group address descriptor */
-+	FEC_GALR(base_addr) = 0x00000000;
-+	FEC_GAUR(base_addr) = 0x00000000;
-+
-+	/* Reset the individual address descriptor */
-+	FEC_IALR(base_addr) = 0x00000000;
-+	FEC_IAUR(base_addr) = 0x00000000;
-+
-+	/* Set the receive control register */
-+	FEC_RCR(base_addr) = FEC_RCR_MAX_FRM_SIZE | FEC_RCR_MII;
-+
-+	/* Set the receive FIFO control register */
-+//	FEC_FECRFCR(base_addr) = FEC_FECRFCR_FRM | FEC_FECRFCR_GR | FEC_FECRFCR_MSK;
-+	FEC_FECRFCR(base_addr) = FEC_FECRFCR_FRM | FEC_FECRFCR_GR
-+                             | (FEC_FECRFCR_MSK     // disable all but ...
-+                                & ~FEC_FECRFCR_FAE  // enable frame accept error
-+                                & ~FEC_FECRFCR_RXW  // enable receive wait condition
-+//                                & ~FEC_FECRFCR_UF   // enable FIFO underflow
-+                             );
-+
-+	/* Set the receive FIFO alarm register */
-+	FEC_FECRFAR(base_addr) = FEC_FECRFAR_ALARM;
-+
-+	/* Set the transmit FIFO control register */
-+//	FEC_FECTFCR(base_addr) = FEC_FECTFCR_FRM | FEC_FECTFCR_GR | FEC_FECTFCR_MSK;
-+	FEC_FECTFCR(base_addr) = FEC_FECTFCR_FRM | FEC_FECTFCR_GR
-+                             | (FEC_FECTFCR_MSK     // disable all but ...
-+                                & ~FEC_FECTFCR_FAE  // enable frame accept error
-+//                                & ~FEC_FECTFCR_TXW  // enable transmit wait condition
-+//                                & ~FEC_FECTFCR_UF   // enable FIFO underflow
-+                                & ~FEC_FECTFCR_OF); // enable FIFO overflow
-+
-+	/* Set the transmit FIFO alarm register */
-+	FEC_FECTFAR(base_addr) = FEC_FECTFAR_ALARM;
-+
-+	/* Set the Tx FIFO watermark */
-+	FEC_FECTFWR(base_addr) = FEC_FECTFWR_XWMRK;
-+
-+	/* Enable the transmitter to append the CRC */
-+	FEC_CTCWR(base_addr) = FEC_CTCWR_TFCW_CRC;
-+
-+	/* Enable the ethernet interrupts */
-+//	FEC_EIMR(base_addr) = FEC_EIMR_MASK;
-+	FEC_EIMR(base_addr) = FEC_EIMR_DISABLE
-+                            | FEC_EIR_LC
-+                            | FEC_EIR_RL
-+                            | FEC_EIR_HBERR
-+                            | FEC_EIR_XFUN
-+                            | FEC_EIR_XFERR
-+                            | FEC_EIR_RFERR
-+                            ;
-+
-+/*
-+ * JKM --
-+ *
-+ * There's a problem with the PHY initialization code -- 
-+ * for now assume uboot left it in an initialized state.
-+ */
-+// printk(KERN_INFO "FECOPEN: starting auto-negotiation\n");
-+// #ifdef   CONFIG_FEC_548x_AUTO_NEGOTIATION
-+#if 0
-+	if ((error_code = init_transceiver(base_addr, &fduplex)) != 0)
-+	{
-+		printk("Initialization of the transceiver is failed\n");
-+		goto ERRORS;
-+	}
-+#else
-+	fduplex = 1;
-+#endif
-+// printk(KERN_INFO "FECOPEN: done with auto-negotiation\n");
-+
-+	if (fduplex)
-+		/* Enable the full duplex mode */
-+		FEC_TCR(base_addr) = FEC_TCR_FDEN | FEC_TCR_HBC;
-+	else
-+		/* Disable reception of frames while transmitting */
-+		FEC_RCR(base_addr) |= FEC_RCR_DRT;
-+
-+	/* Enable MIB */
-+	FEC_MIBC(base_addr) = FEC_MIBC_ENABLE;
-+
-+	/* Enable FEC */
-+	FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
-+
-+	/* Initialize tx descriptors and start DMA for the transmission */
-+	for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
-+		fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT;
-+
-+	fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
-+
-+	fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0;
-+
-+	MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0,
-+		     (unsigned char *) &(FEC_FECTFDR(base_addr)), 0,
-+		     FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx,
-+		     FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT,
-+		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
-+
-+	/* Initialize rx descriptors and start DMA for the reception */
-+	for (i = 0; i < FEC_RX_BUF_NUMBER; i++) {
-+		fp->askb_rx[i] = alloc_skb(FEC_MAXBUF_SIZE + 16, GFP_DMA);
-+		if (!fp->askb_rx[i]) {
-+			fp->fecpriv_rxdesc[i].dataPointer = 0;
-+			fp->fecpriv_rxdesc[i].statCtrl = 0;
-+			fp->fecpriv_rxdesc[i].length = 0;
-+		}
-+		else {
-+			skb_reserve(fp->askb_rx[i], 16);
-+			fp->askb_rx[i]->dev = dev;
-+    			fp->fecpriv_rxdesc[i].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[i]->tail);
-+    			fp->fecpriv_rxdesc[i].statCtrl = MCD_FEC_BUF_READY | MCD_FEC_INTERRUPT;
-+	    		fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE;
-+		}
-+	}
-+
-+	fp->fecpriv_rxdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
-+	fp->fecpriv_current_rx = 0;
-+
-+	/* flush entire data cache before restarting the DMA */
-+#if 0
-+/* JKM -- currently running with cache turned off */
-+	DcacheFlushInvalidate();
-+#endif
-+	
-+	MCD_startDma(fp->fecpriv_fec_rx_channel, (char *) fp->fecpriv_rxdesc, 0,
-+		     (unsigned char *) &(FEC_FECRFDR(base_addr)), 0,
-+		     FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_rx,
-+		     FEC_RX_DMA_PRI, MCD_FECRX_DMA | MCD_INTERRUPT,
-+		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
-+
-+	netif_start_queue(dev);
-+	return 0;
-+
-+ERRORS:
-+
-+	/* Remove the channels and return with the error code */
-+	if (fp->fecpriv_fec_rx_channel != -1) {
-+		dma_disconnect(fp->fecpriv_fec_rx_channel);
-+		dma_remove_channel_by_number(fp->fecpriv_fec_rx_channel);
-+		fp->fecpriv_fec_rx_channel = -1;
-+	}
-+
-+	if (fp->fecpriv_fec_tx_channel != -1) {
-+		dma_disconnect(fp->fecpriv_fec_tx_channel);
-+		dma_remove_channel_by_number(fp->fecpriv_fec_tx_channel);
-+		fp->fecpriv_fec_tx_channel = -1;
-+	}
-+
-+	return error_code;
-+}
-+
-+/************************************************************************
-+* NAME: fec_close
-+*
-+* DESCRIPTION: This function performs the graceful stop of the
-+*				transmission and disables FEC
-+*
-+* RETURNS: This function always returns zero.
-+*************************************************************************/
-+int fec_close(struct net_device *dev)
-+{
-+	struct fec_priv *fp = netdev_priv(dev);
-+	unsigned long base_addr = (unsigned long) dev->base_addr;
-+	unsigned long time;
-+	int i;
-+
-+	netif_stop_queue(dev);
-+
-+	/* Perform the graceful stop */
-+	FEC_TCR(base_addr) |= FEC_TCR_GTS;
-+
-+	time = jiffies;
-+
-+	/* Wait for the graceful stop */
-+	while (!(FEC_EIR(base_addr) & FEC_EIR_GRA) && jiffies - time < FEC_GR_TIMEOUT * HZ)
-+		schedule();
-+
-+	/* Disable FEC */
-+	FEC_ECR(base_addr) = FEC_ECR_DISABLE;
-+
-+	/* Reset the DMA channels */
-+	spin_lock_irq(&fp->fecpriv_lock);
-+	MCD_killDma(fp->fecpriv_fec_tx_channel);
-+	spin_unlock_irq(&fp->fecpriv_lock);
-+	dma_remove_channel_by_number(fp->fecpriv_fec_tx_channel);
-+	dma_disconnect(fp->fecpriv_fec_tx_channel);
-+	fp->fecpriv_fec_tx_channel = -1;
-+
-+	for (i = 0; i < FEC_TX_BUF_NUMBER; i++) {
-+		if (fp->fecpriv_txbuf[i]) {
-+			kfree(fp->fecpriv_txbuf[i]);
-+			fp->fecpriv_txbuf[i] = NULL;
-+		}
-+	}
-+
-+	spin_lock_irq(&fp->fecpriv_lock);
-+	MCD_killDma(fp->fecpriv_fec_rx_channel);
-+	spin_unlock_irq(&fp->fecpriv_lock);
-+
-+	dma_remove_channel_by_number(fp->fecpriv_fec_rx_channel);
-+	dma_disconnect(fp->fecpriv_fec_rx_channel);
-+	fp->fecpriv_fec_rx_channel = -1;
-+
-+	for (i = 0; i < FEC_RX_BUF_NUMBER; i++) {
-+		if (fp->askb_rx[i]) {
-+			kfree_skb(fp->askb_rx[i]);
-+			fp->askb_rx[i] = NULL;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+/************************************************************************
-+* +NAME: fec_get_stat
-+*
-+* RETURNS: This function returns the statistical information.
-+*************************************************************************/
-+struct net_device_stats * fec_get_stat(struct net_device *dev)
-+{
-+	struct fec_priv *fp = netdev_priv(dev);
-+	unsigned long base_addr = dev->base_addr;
-+
-+	/* Receive the statistical information */
-+	fp->fecpriv_stat.rx_packets = FECSTAT_RMON_R_PACKETS(base_addr);
-+	fp->fecpriv_stat.tx_packets = FECSTAT_RMON_T_PACKETS(base_addr);
-+	fp->fecpriv_stat.rx_bytes = FECSTAT_RMON_R_OCTETS(base_addr);
-+	fp->fecpriv_stat.tx_bytes = FECSTAT_RMON_T_OCTETS(base_addr);
-+
-+	fp->fecpriv_stat.multicast = FECSTAT_RMON_R_MC_PKT(base_addr);
-+	fp->fecpriv_stat.collisions = FECSTAT_RMON_T_COL(base_addr);
-+
-+	fp->fecpriv_stat.rx_length_errors = FECSTAT_RMON_R_UNDERSIZE(base_addr) +
-+		FECSTAT_RMON_R_OVERSIZE(base_addr) +
-+		FECSTAT_RMON_R_FRAG(base_addr) +
-+		FECSTAT_RMON_R_JAB(base_addr);
-+	fp->fecpriv_stat.rx_crc_errors = FECSTAT_IEEE_R_CRC(base_addr);
-+	fp->fecpriv_stat.rx_frame_errors = FECSTAT_IEEE_R_ALIGN(base_addr);
-+	fp->fecpriv_stat.rx_over_errors = FECSTAT_IEEE_R_MACERR(base_addr);
-+
-+	fp->fecpriv_stat.tx_carrier_errors = FECSTAT_IEEE_T_CSERR(base_addr);
-+	fp->fecpriv_stat.tx_fifo_errors = FECSTAT_IEEE_T_MACERR(base_addr);
-+	fp->fecpriv_stat.tx_window_errors = FECSTAT_IEEE_T_LCOL(base_addr);
-+
-+	/* I hope that one frame doesn't have more than one error */
-+	fp->fecpriv_stat.rx_errors = fp->fecpriv_stat.rx_length_errors +
-+		fp->fecpriv_stat.rx_crc_errors +
-+		fp->fecpriv_stat.rx_frame_errors +
-+		fp->fecpriv_stat.rx_over_errors +
-+		fp->fecpriv_stat.rx_dropped;
-+	fp->fecpriv_stat.tx_errors = fp->fecpriv_stat.tx_carrier_errors +
-+		fp->fecpriv_stat.tx_fifo_errors +
-+		fp->fecpriv_stat.tx_window_errors +
-+		fp->fecpriv_stat.tx_aborted_errors +
-+		fp->fecpriv_stat.tx_heartbeat_errors +
-+		fp->fecpriv_stat.tx_dropped;
-+
-+	return &fp->fecpriv_stat;
-+}
-+
-+/************************************************************************
-+* NAME: fec_set_multicast_list
-+*
-+* DESCRIPTION: This function sets the frame filtering parameters
-+*************************************************************************/
-+void fec_set_multicast_list(struct net_device *dev)
-+{
-+	struct dev_mc_list *dmi;
-+	unsigned int crc, data;
-+	int i, j, k;
-+	unsigned long base_addr = (unsigned long) dev->base_addr;
-+
-+	if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI) {
-+		/* Allow all incoming frames */
-+		FEC_GALR(base_addr) = 0xFFFFFFFF;
-+		FEC_GAUR(base_addr) = 0xFFFFFFFF;
-+		return;
-+	}
-+
-+	/* Reset the group address register */
-+	FEC_GALR(base_addr) = 0x00000000;
-+	FEC_GAUR(base_addr) = 0x00000000;
-+
-+	/* Process all addresses */
-+	for (i = 0, dmi = dev->mc_list; i < dev->mc_count; i++, dmi = dmi->next) {
-+		/* Processing must be only for the group addresses */
-+		if (!(dmi->dmi_addr[0] & 1))
-+			continue;
-+
-+		/* Calculate crc value for the current address */
-+		crc = 0xFFFFFFFF;
-+		for (j = 0; j < dmi->dmi_addrlen; j++) {
-+			for (k = 0, data = dmi->dmi_addr[j]; k < 8;  k++, data >>= 1) {
-+				if ((crc ^ data) & 1)
-+					crc = (crc >> 1) ^ FEC_CRCPOL;
-+				else
-+					crc >>= 1;
-+			}
-+		}
-+
-+		/* Add this value */
-+		crc >>= 26;
-+		crc &= 0x3F;
-+		if (crc > 31)
-+			FEC_GAUR(base_addr) |= 0x1 << (crc - 32);
-+		else
-+			FEC_GALR(base_addr) |= 0x1 << crc;
-+	}
-+}
-+
-+/************************************************************************
-+* NAME: fec_set_mac_address
-+*
-+* DESCRIPTION: This function sets the MAC address
-+*************************************************************************/
-+int fec_set_mac_address(struct net_device *dev, void *p)
-+{
-+	struct fec_priv *fp = netdev_priv(dev);
-+	unsigned long base_addr = (unsigned long) dev->base_addr;
-+	struct sockaddr *addr = p;
-+
-+	if (netif_running(dev))
-+		return -EBUSY;
-+
-+	/* Copy a new address to the device structure */
-+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-+
-+	/* Copy a new address to the private structure */
-+	memcpy(fp->fecpriv_mac_addr, addr->sa_data, 6);
-+
-+	/* Set the address to the registers */
-+	FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) |
-+		(fp->fecpriv_mac_addr[1] << 16) |
-+		(fp->fecpriv_mac_addr[2] << 8) |
-+		fp->fecpriv_mac_addr[3];
-+	FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) |
-+		(fp->fecpriv_mac_addr[5] << 16) |
-+		0x8808;
-+
-+	return 0;
-+}
-+
-+/************************************************************************
-+* NAME: fec_tx
-+*
-+* DESCRIPTION: This function starts transmission of the frame using DMA
-+*
-+* RETURNS: This function always returns zero.
-+*************************************************************************/
-+int fec_tx(struct sk_buff *skb, struct net_device *dev)
-+{
-+	struct fec_priv *fp = netdev_priv(dev);
-+	void *data, *data_aligned;
-+	int offset;
-+
-+	data = kmalloc(skb->len + 15, GFP_DMA | GFP_ATOMIC);
-+
-+	if (!data) {
-+		fp->fecpriv_stat.tx_dropped++;
-+		dev_kfree_skb(skb);
-+		return 0;
-+	}
-+
-+	offset = (((unsigned long)virt_to_phys(data) + 15) & 0xFFFFFFF0) -
-+		(unsigned long)virt_to_phys(data);
-+	data_aligned = (void*)((unsigned long)data + offset);
-+	memcpy(data_aligned, skb->data, skb->len);
-+
-+	/* flush data cache before initializing the descriptor and starting DMA */
-+#if 0
-+/* JKM -- currently running with cache turned off */
-+	DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(data_aligned), skb->len);
-+#endif
-+
-+	spin_lock_irq(&fp->fecpriv_lock);
-+
-+	/* Initialize the descriptor */
-+	fp->fecpriv_txbuf[fp->fecpriv_next_tx] = data;
-+	fp->fecpriv_txdesc[fp->fecpriv_next_tx].dataPointer = (unsigned int) virt_to_phys(data_aligned);
-+	fp->fecpriv_txdesc[fp->fecpriv_next_tx].length = skb->len;
-+	fp->fecpriv_txdesc[fp->fecpriv_next_tx].statCtrl |= (MCD_FEC_END_FRAME | MCD_FEC_BUF_READY);
-+	fp->fecpriv_next_tx = (fp->fecpriv_next_tx + 1) & FEC_TX_INDEX_MASK;
-+
-+	if (fp->fecpriv_txbuf[fp->fecpriv_current_tx] && fp->fecpriv_current_tx == fp->fecpriv_next_tx)
-+		netif_stop_queue(dev);
-+
-+	spin_unlock_irq(&fp->fecpriv_lock);
-+
-+	/* Tell the DMA to continue the transmission */
-+	MCD_continDma(fp->fecpriv_fec_tx_channel);
-+
-+	dev_kfree_skb(skb);
-+
-+	dev->trans_start = jiffies;
-+
-+	return 0;
-+}
-+
-+/************************************************************************
-+* NAME: fec_tx_timeout
-+*
-+* DESCRIPTION: If the interrupt processing of received frames was lost
-+*              and DMA stopped the reception, this function clears
-+*              the transmission descriptors and starts DMA
-+*
-+*************************************************************************/
-+void fec_tx_timeout(struct net_device *dev)
-+{
-+	int i;
-+	struct fec_priv *fp = netdev_priv(dev);
-+	unsigned long base_addr = (unsigned long) dev->base_addr;
-+
-+	spin_lock_irq(&fp->fecpriv_lock);
-+	MCD_killDma(fp->fecpriv_fec_tx_channel);
-+	for (i = 0; i < FEC_TX_BUF_NUMBER; i++) {
-+		if (fp->fecpriv_txbuf[i]) {
-+			kfree(fp->fecpriv_txbuf[i]);
-+			fp->fecpriv_txbuf[i] = NULL;
-+		}
-+		fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT;
-+	}
-+	fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
-+
-+	fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0;
-+
-+    /* Reset FIFOs */
-+    FEC_FECFRST(base_addr) |= FEC_SW_RST;
-+    FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
-+
-+	/* Reset and disable FEC */
-+//	FEC_ECR(base_addr) = FEC_ECR_RESET;
-+
-+	/* Enable FEC */
-+	FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
-+
-+	MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0,
-+		     (unsigned char *) &(FEC_FECTFDR(base_addr)), 0,
-+		     FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx,
-+		     FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT,
-+		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
-+
-+	spin_unlock_irq(&fp->fecpriv_lock);
-+
-+	netif_wake_queue(dev);
-+
-+}
-+
-+/************************************************************************
-+* NAME: fec_read_mii
-+*
-+* DESCRIPTION: This function reads the value from the MII register
-+*
-+* RETURNS: If no error occurs, this function returns zero.
-+*************************************************************************/
-+int fec_read_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int *data)
-+{
-+	unsigned long time;
-+
-+	/* Clear the MII interrupt bit */
-+	FEC_EIR(base_addr) = FEC_EIR_MII;
-+
-+	/* Write to the MII management frame register */
-+	FEC_MMFR(base_addr) = FEC_MMFR_READ | (pa << 23) | (ra << 18);
-+
-+	time = jiffies;
-+
-+	/* Wait for the reading */
-+	while (!(FEC_EIR(base_addr) & FEC_EIR_MII)) {
-+		if (jiffies - time > FEC_MII_TIMEOUT * HZ)
-+			return -ETIME;
-+		schedule();
-+	}
-+
-+	/* Clear the MII interrupt bit */
-+	FEC_EIR(base_addr) = FEC_EIR_MII;
-+
-+	*data = FEC_MMFR(base_addr) & 0x0000FFFF;
-+
-+	return 0;
-+}
-+
-+/************************************************************************
-+* NAME: fec_write_mii
-+*
-+* DESCRIPTION: This function writes the value to the MII register
-+*
-+* RETURNS: If no error occurs, this function returns zero.
-+*************************************************************************/
-+int fec_write_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int data)
-+{
-+	unsigned long time;
-+
-+	/* Clear the MII interrupt bit */
-+	FEC_EIR(base_addr) = FEC_EIR_MII;
-+
-+	/* Write to the MII management frame register */
-+	FEC_MMFR(base_addr) = FEC_MMFR_WRITE | (pa << 23) | (ra << 18) | data;
-+
-+	time = jiffies;
-+
-+	/* Wait for the writing */
-+	while (!(FEC_EIR(base_addr) & FEC_EIR_MII)) {
-+		if (jiffies - time > FEC_MII_TIMEOUT * HZ)
-+			return -ETIME;
-+		schedule();
-+	}
-+
-+	/* Clear the MII interrupt bit */
-+	FEC_EIR(base_addr) = FEC_EIR_MII;
-+
-+	return 0;
-+}
-+
-+/************************************************************************
-+* NAME: fec_interrupt_tx_handler
-+*
-+* DESCRIPTION: This function is called when the data
-+*              transmission from the buffer to the FEC is completed.
-+*
-+*************************************************************************/
-+void fec_interrupt_fec_tx_handler(struct net_device *dev)
-+{
-+	struct fec_priv *fp = netdev_priv(dev);
-+
-+	/* Release the socket buffer */
-+	if(fp->fecpriv_txbuf[fp->fecpriv_current_tx]) {
-+		kfree(fp->fecpriv_txbuf[fp->fecpriv_current_tx]);
-+		fp->fecpriv_txbuf[fp->fecpriv_current_tx] = NULL;
-+	}
-+	fp->fecpriv_current_tx = (fp->fecpriv_current_tx + 1) & FEC_TX_INDEX_MASK;
-+
-+	if (MCD_dmaStatus(fp->fecpriv_fec_tx_channel) == MCD_DONE) {
-+		for (; fp->fecpriv_current_tx != fp->fecpriv_next_tx; fp->fecpriv_current_tx = (fp->fecpriv_current_tx + 1) & FEC_TX_INDEX_MASK) {
-+			if(fp->fecpriv_txbuf[fp->fecpriv_current_tx]) {
-+				kfree(fp->fecpriv_txbuf[fp->fecpriv_current_tx]);
-+				fp->fecpriv_txbuf[fp->fecpriv_current_tx] = NULL;
-+			}
-+		}
-+	}
-+
-+	if (netif_queue_stopped(dev))
-+		netif_wake_queue(dev);
-+}
-+
-+/************************************************************************
-+* NAME: fec_interrupt_rx_handler
-+*
-+* DESCRIPTION: This function is called when the data
-+*              reception from the FEC to the reception buffer is completed.
-+*
-+*************************************************************************/
-+void fec_interrupt_fec_rx_handler(struct net_device *dev)
-+{
-+	struct fec_priv *fp = netdev_priv(dev);
-+	struct sk_buff *skb;
-+	int i;
-+
-+	fp->fecpriv_rxflag = 1;
-+	// Some buffers can be missed
-+	if(!(fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME))
-+	{
-+		// Find a valid index
-+		for(i = 0; i < FEC_RX_BUF_NUMBER && !(fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME); i++, fp->fecpriv_current_rx = (fp->fecpriv_current_rx + 1) & FEC_RX_INDEX_MASK);
-+
-+		if(i == FEC_RX_BUF_NUMBER)
-+		{
-+			// There are no data to process
-+			// Tell the DMA to continue the reception
-+			MCD_continDma(fp->fecpriv_fec_rx_channel);
-+
-+			fp->fecpriv_rxflag = 0;
-+
-+			return;
-+		}
-+	}
-+
-+	for (; fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME;	fp->fecpriv_current_rx = (fp->fecpriv_current_rx + 1) & FEC_RX_INDEX_MASK) {
-+	    if( (fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length <= FEC_MAXBUF_SIZE) &&
-+		    (fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length > 4)) { /* --tym-- */
-+    		skb = fp->askb_rx[fp->fecpriv_current_rx];
-+    		if (!skb)
-+			fp->fecpriv_stat.rx_dropped++;
-+    		else {
-+    		    /* flush data cache before initializing the descriptor and starting DMA */
-+//		    DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), fp->askb_rx[fp->fecpriv_current_rx]->len);
-+
-+    			skb_put(skb, fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length - 4);
-+    			skb->protocol = eth_type_trans(skb, dev);
-+    			netif_rx(skb);
-+		}
-+		fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl &= ~MCD_FEC_END_FRAME;
-+    		/* allocate new skbuff */
-+    		fp->askb_rx[fp->fecpriv_current_rx] = alloc_skb(FEC_MAXBUF_SIZE + 16, /*GFP_ATOMIC |*/ GFP_DMA);
-+		if (!fp->askb_rx[fp->fecpriv_current_rx]) {
-+			fp->fecpriv_rxdesc[fp->fecpriv_current_rx].dataPointer = 0;
-+			fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length = 0;
-+			fp->fecpriv_stat.rx_dropped++;
-+		}
-+    		else {
-+			skb_reserve(fp->askb_rx[fp->fecpriv_current_rx], 16);
-+			fp->askb_rx[fp->fecpriv_current_rx]->dev = dev;
-+
-+			/* flush data cache before initializing the descriptor and starting DMA */
-+#if 0
-+/* JKM -- currently running with cache turned off */
-+			DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), FEC_MAXBUF_SIZE);
-+#endif
-+
-+    	    	fp->fecpriv_rxdesc[fp->fecpriv_current_rx].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail);
-+    	    	fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length = FEC_MAXBUF_SIZE;
-+		fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl |= MCD_FEC_BUF_READY;
-+
-+    		    // flush data cache before initializing the descriptor and starting DMA
-+//		    DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), FEC_MAXBUF_SIZE);
-+    	    }
-+        }
-+
-+	}
-+
-+	/* Tell the DMA to continue the reception */
-+	MCD_continDma(fp->fecpriv_fec_rx_channel);
-+
-+	fp->fecpriv_rxflag = 0;
-+}
-+
-+/************************************************************************
-+* NAME: fec_interrupt_handler
-+*
-+* DESCRIPTION: This function is called when some special errors occur
-+*
-+*************************************************************************/
-+irqreturn_t fec_interrupt_handler(int irq, void *dev_id)
-+{
-+
-+	struct net_device *dev = (struct net_device *)dev_id;
-+	struct fec_priv *fp = netdev_priv(dev);
-+	unsigned long base_addr = (unsigned long) dev->base_addr;
-+	unsigned long events;
-+
-+	/* Read and clear the events */
-+	events = FEC_EIR(base_addr) & FEC_EIMR(base_addr);
-+
-+	if (events & FEC_EIR_HBERR) {
-+		fp->fecpriv_stat.tx_heartbeat_errors++;
-+		FEC_EIR(base_addr) = FEC_EIR_HBERR;
-+	}
-+
-+	/* receive/transmit FIFO error */
-+    	if (((events & FEC_EIR_RFERR) != 0) || ((events & FEC_EIR_XFERR) != 0)) {
-+        	/* kill DMA receive channel */
-+        	MCD_killDma (fp->fecpriv_fec_rx_channel);
-+
-+        	/* kill running transmission by DMA */
-+        	MCD_killDma (fp->fecpriv_fec_tx_channel);
-+
-+		/* Reset FIFOs */
-+        	FEC_FECFRST(base_addr) |= FEC_SW_RST;
-+        	FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
-+
-+        	/* reset receive FIFO status register */
-+        	FEC_FECRFSR(base_addr) = FEC_FECRFSR_FAE |
-+					 FEC_FECRFSR_RXW |
-+					 FEC_FECRFSR_UF;
-+
-+		/* reset transmit FIFO status register */
-+        	FEC_FECTFSR(base_addr) = FEC_FECTFSR_FAE |
-+					 FEC_FECTFSR_TXW |
-+					 FEC_FECTFSR_UF |
-+					 FEC_FECTFSR_OF;
-+
-+		/* reset RFERR and XFERR event */
-+        	FEC_EIR(base_addr) = FEC_EIR_RFERR | FEC_EIR_XFERR;
-+
-+		/* stop queue */
-+		netif_stop_queue(dev);
-+	
-+		/* execute reinitialization as tasklet */
-+		tasklet_schedule(&fp->fecpriv_tasklet_reinit);
-+
-+		fp->fecpriv_stat.rx_dropped++;
-+	}
-+
-+	/* transmit FIFO underrun */
-+    	if ((events & FEC_EIR_XFUN) != 0) {
-+        	/* reset XFUN event */
-+        	FEC_EIR(base_addr) = FEC_EIR_XFUN;
-+		fp->fecpriv_stat.tx_aborted_errors++;
-+    	}
-+
-+	/* late collision */
-+    	if ((events & FEC_EIR_LC) != 0) {
-+        	/* reset LC event */
-+		FEC_EIR(base_addr) = FEC_EIR_LC;
-+		fp->fecpriv_stat.tx_aborted_errors++;
-+    	}
-+
-+	/* collision retry limit */
-+    	if ((events & FEC_EIR_RL) != 0) {
-+		/* reset RL event */
-+        	FEC_EIR(base_addr) = FEC_EIR_RL;
-+		fp->fecpriv_stat.tx_aborted_errors++;
-+    	}
-+    	return 0;
-+}
-+
-+/************************************************************************
-+* NAME: fec_interrupt_reinit
-+*
-+* DESCRIPTION: This function is called from interrupt handler
-+*              when controller must be reinitialized.
-+*
-+*************************************************************************/
-+void fec_interrupt_fec_reinit(unsigned long data)
-+{
-+	int i;
-+	struct net_device *dev = (struct net_device*)data;
-+	struct fec_priv *fp = netdev_priv(dev);
-+	unsigned long base_addr = (unsigned long) dev->base_addr;
-+
-+	/* Initialize reception descriptors and start DMA for the reception */
-+	for (i = 0; i < FEC_RX_BUF_NUMBER; i++) {
-+		if (!fp->askb_rx[i]) {
-+			fp->askb_rx[i] = alloc_skb(FEC_MAXBUF_SIZE + 16, GFP_ATOMIC | GFP_DMA);
-+			if (!fp->askb_rx[i]) {
-+				fp->fecpriv_rxdesc[i].dataPointer = 0;
-+				fp->fecpriv_rxdesc[i].statCtrl = 0;
-+				fp->fecpriv_rxdesc[i].length = 0;
-+				continue;
-+			}
-+			fp->askb_rx[i]->dev = dev;
-+			skb_reserve(fp->askb_rx[i], 16);
-+		}
-+		fp->fecpriv_rxdesc[i].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[i]->tail);
-+		fp->fecpriv_rxdesc[i].statCtrl = MCD_FEC_BUF_READY | MCD_FEC_INTERRUPT;
-+		fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE;
-+	}
-+
-+	fp->fecpriv_rxdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
-+	fp->fecpriv_current_rx = 0;
-+
-+	/* restart frame transmission */
-+	for (i = 0; i < FEC_TX_BUF_NUMBER; i++) {
-+		if (fp->fecpriv_txbuf[i]) {
-+			kfree(fp->fecpriv_txbuf[i]);
-+			fp->fecpriv_txbuf[i] = NULL;
-+    			fp->fecpriv_stat.tx_dropped++;
-+		}
-+		fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT;
-+	}
-+	fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
-+	fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0;
-+
-+	/* flush entire data cache before restarting the DMA */
-+#if 0
-+/* JKM -- currently running with cache turned off */
-+	DcacheFlushInvalidate();
-+#endif
-+	
-+	/* restart DMA from beginning */
-+	MCD_startDma(fp->fecpriv_fec_rx_channel,
-+		     (char *) fp->fecpriv_rxdesc, 0,
-+		     (unsigned char *) &(FEC_FECRFDR(base_addr)), 0,
-+		     FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_rx,
-+		     FEC_RX_DMA_PRI, MCD_FECRX_DMA | MCD_INTERRUPT,
-+		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
-+
-+	MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0,
-+		     (unsigned char *) &(FEC_FECTFDR(base_addr)), 0,
-+		     FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx,
-+		     FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT,
-+		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
-+
-+	/* Enable FEC */
-+	FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
-+
-+	netif_wake_queue(dev);
-+}
-+
-+/************************************************************************
-+* NAME: fec_interrupt_tx_handler_fec0
-+*
-+* DESCRIPTION: This is the DMA interrupt handler using  for FEC0
-+*              transmission.
-+*
-+*************************************************************************/
-+void fec_interrupt_fec_tx_handler_fec0(void)
-+{
-+	fec_interrupt_fec_tx_handler(fec_dev[0]);
-+}
-+
-+#ifdef   FEC_2
-+/************************************************************************
-+* NAME: fec_interrupt_tx_handler_fec1
-+*
-+* DESCRIPTION: This is the DMA interrupt handler using for the FEC1
-+*              transmission.
-+*
-+*************************************************************************/
-+void fec_interrupt_fec_tx_handler_fec1(void)
-+{
-+	fec_interrupt_fec_tx_handler(fec_dev[1]);
-+}
-+#endif
-+
-+/************************************************************************
-+* NAME: fec_interrupt_rx_handler_fec0
-+*
-+* DESCRIPTION: This is the DMA interrupt handler using for the FEC0
-+*              reception.
-+*
-+*************************************************************************/
-+void fec_interrupt_fec_rx_handler_fec0(void)
-+{
-+	fec_interrupt_fec_rx_handler(fec_dev[0]);
-+}
-+
-+#ifdef   FEC_2
-+/************************************************************************
-+* NAME: fec_interrupt_rx_handler_fec1
-+*
-+* DESCRIPTION: This is the DMA interrupt handler using for the FEC1
-+*              reception.
-+*
-+*************************************************************************/
-+void fec_interrupt_fec_rx_handler_fec1(void)
-+{
-+	fec_interrupt_fec_rx_handler(fec_dev[1]);
-+}
-+
-+#endif
-+
-+#ifndef MODULE
-+/************************************************************************
-+* NAME: fec_mac_setup0
-+*
-+* DESCRIPTION: This function sets the MAC address of FEC0 from command line
-+*
-+*************************************************************************/
-+int __init fec_mac_setup0(char *s)
-+{
-+	if(!s || !*s)
-+		return 1;
-+
-+	if(fec_str_to_mac(s, fec_mac_addr_fec0))
-+		printk("The MAC address of FEC0 cannot be set from command line");
-+	return 1;
-+}
-+
-+#ifdef   FEC_2
-+
-+/************************************************************************
-+* NAME: fec_mac_setup1
-+*
-+* DESCRIPTION: This function sets the MAC address of FEC1 from command line
-+*
-+*************************************************************************/
-+int __init fec_mac_setup1(char *s)
-+{
-+	if(!s || !*s)
-+		return 1;
-+
-+	if(fec_str_to_mac(s, fec_mac_addr_fec1))
-+		printk("The MAC address of FEC1 cannot be set from command line");
-+	return 1;
-+}
-+#endif
-+
-+/************************************************************************
-+* NAME: fec_str_to_mac
-+*
-+* DESCRIPTION: This function interprets the character string into MAC addr
-+*
-+*************************************************************************/
-+int fec_str_to_mac( char *str_mac, unsigned char* addr)
-+{
-+	unsigned long val;
-+	char c;
-+	unsigned long octet[6], *octetptr = octet;
-+	int i;
-+
-+again:
-+	val = 0;
-+	while ((c = *str_mac) != '\0') {
-+		if ((c>='0')&&(c<='9')) {
-+			val = (val * 16) + (c - '0');
-+			str_mac++;
-+			continue;
-+		}
-+		else if (((c>='a')&&(c<='f'))||((c>='A')&&(c<='F'))) {
-+			val = (val << 4) + (c + 10 - (((c>='a')&&(c<='f')) ? 'a' : 'A'));
-+			str_mac++;
-+			continue;
-+		}
-+		break;
-+	}
-+	if (*str_mac == ':') {
-+		*octetptr++ = val, str_mac++;
-+		if (octetptr >= octet + 6)
-+			return 1;
-+		goto again;
-+	}
-+
-+	/* Check for trailing characters */
-+	if (*str_mac && !(*str_mac==' '))
-+		return 1;
-+
-+	*octetptr++ = val;
-+
-+	if ((octetptr - octet)==6) {
-+		for(i=0;i<=6;i++)
-+			addr[i]=octet[i];
-+	}
-+	else
-+		return 1;
-+
-+	return 0;
-+}
-+#endif
---- /dev/null
-+++ b/drivers/net/fec/fec.h
-@@ -0,0 +1,162 @@
-+
-+#define   FEC_BASE_ADDR_FEC0                ((unsigned int)MCF_MBAR + 0x9000)
-+#define   FEC_BASE_ADDR_FEC1                ((unsigned int)MCF_MBAR + 0x9800)
-+
-+//#define   FEC_INTC_IMRH_INT_MASK38          (0x00000040)
-+//#define   FEC_INTC_IMRH_INT_MASK39          (0x00000080)
-+//#define   FEC_INTC_ICR_FEC0                 (0x30)
-+//#define   FEC_INTC_ICR_FEC1                 (0x31)
-+#define   FEC_FECI2CIRQ                     (0xFFC0)
-+#define   FEC_GPIO_PAR_FECI2CIRQ            *(volatile unsigned short*)((unsigned int)MCF_MBAR + 0xA44)
-+//#define   FEC_INTC_ICRn(x)                  (*(volatile unsigned char *)(void*)((unsigned int) MCF_MBAR + 0x000740+((x)*0x001)))
-+//#define   FEC_INTC_IMRH                     *(volatile unsigned int*)((unsigned int)MCF_MBAR + 0x000708)
-+
-+#define   FEC_ECR_DISABLE                   (0x00000000)
-+
-+#define   FEC_ECR(x)                        *(volatile unsigned int *)(x + 0x024)
-+#define   FEC_EIR(x)                        *(volatile unsigned int*)(x + 0x004)
-+#define   FEC_PALR(x)                       *(volatile unsigned int*)(x + 0x0E4)
-+#define   FEC_PAUR(x)                       *(volatile unsigned int*)(x + 0x0E8)
-+#define   FEC_IALR(x)                       *(volatile unsigned int*)(x + 0x11C)
-+#define   FEC_IAUR(x)                       *(volatile unsigned int*)(x + 0x118)
-+#define   FEC_GALR(x)                       *(volatile unsigned int*)(x + 0x124)
-+#define   FEC_GAUR(x)                       *(volatile unsigned int*)(x + 0x120)
-+#define   FEC_RCR(x)                        *(volatile unsigned int*)(x + 0x084)
-+#define   FEC_FECRFCR(x)                    *(volatile unsigned int*)(x + 0x18C)
-+#define   FEC_FECRFAR(x)                    *(volatile unsigned int*)(x + 0x198)
-+#define   FEC_FECTFCR(x)                    *(volatile unsigned int*)(x + 0x1AC)
-+#define   FEC_FECTFAR(x)                    *(volatile unsigned int*)(x + 0x1B8)
-+#define   FEC_FECTFWR(x)                    *(volatile unsigned int*)(x + 0x144)
-+#define   FEC_CTCWR(x)                      *(volatile unsigned int*)(x + 0x1C8)
-+#define   FEC_EIMR(x)                       *(volatile unsigned int*)(x + 0x008)
-+#define   FEC_TCR(x)                        *(volatile unsigned int*)(x + 0x0C4)
-+#define   FEC_MIBC(x)                       *(volatile unsigned int*)(x + 0x064)
-+#define   FEC_MSCR(x)                       *(volatile unsigned int*)(x + 0x044)
-+#define   FEC_FECTFDR(x)                    *(volatile unsigned int*)(x + 0x1A4)
-+#define   FEC_FECRFDR(x)                    *(volatile unsigned int*)(x + 0x184)
-+#define   FEC_FECTFSR(x)                    *(volatile unsigned int*)(x + 0x1A8)
-+#define   FEC_FECRFSR(x)					*(volatile unsigned int*)(x + 0x188)
-+#define   FECSTAT_RMON_R_PACKETS(x)         *(volatile unsigned int*)(x + 0x284)
-+#define   FECSTAT_RMON_T_PACKETS(x)         *(volatile unsigned int*)(x + 0x204)
-+#define   FECSTAT_RMON_R_OCTETS(x)          *(volatile unsigned int*)(x + 0x2C4)
-+#define   FECSTAT_RMON_T_OCTETS(x)          *(volatile unsigned int*)(x + 0x244)
-+#define   FECSTAT_RMON_R_UNDERSIZE(x)       *(volatile unsigned int*)(x + 0x294)
-+#define   FECSTAT_RMON_R_OVERSIZE(x)        *(volatile unsigned int*)(x + 0x298)
-+#define   FECSTAT_RMON_R_FRAG(x)            *(volatile unsigned int*)(x + 0x29C)
-+#define   FECSTAT_RMON_R_JAB(x)             *(volatile unsigned int*)(x + 0x2A0)
-+#define   FECSTAT_RMON_R_MC_PKT(x)          *(volatile unsigned int*)(x + 0x28C)
-+#define   FECSTAT_RMON_T_COL(x)             *(volatile unsigned int*)(x + 0x224)
-+#define   FECSTAT_IEEE_R_ALIGN(x)           *(volatile unsigned int*)(x + 0x2D4)
-+#define   FECSTAT_IEEE_R_CRC(x)             *(volatile unsigned int*)(x + 0x2D0)
-+#define   FECSTAT_IEEE_R_MACERR(x)          *(volatile unsigned int*)(x + 0x2D8)
-+#define   FECSTAT_IEEE_T_CSERR(x)           *(volatile unsigned int*)(x + 0x268)
-+#define   FECSTAT_IEEE_T_MACERR(x)          *(volatile unsigned int*)(x + 0x264)
-+#define   FECSTAT_IEEE_T_LCOL(x)            *(volatile unsigned int*)(x + 0x25C)
-+#define   FECSTAT_IEEE_R_OCTETS_OK(x)       *(volatile unsigned int*)(x + 0x2E0)
-+#define   FECSTAT_IEEE_T_OCTETS_OK(x)       *(volatile unsigned int*)(x + 0x274)
-+#define   FECSTAT_IEEE_R_DROP(x)            *(volatile unsigned int*)(x + 0x2C8)
-+#define   FECSTAT_IEEE_T_DROP(x)            *(volatile unsigned int*)(x + 0x248)
-+#define   FECSTAT_IEEE_R_FRAME_OK(x)        *(volatile unsigned int*)(x + 0x2CC)
-+#define   FECSTAT_IEEE_T_FRAME_OK(x)        *(volatile unsigned int*)(x + 0x24C)
-+#define   FEC_MMFR(x)                       *(volatile unsigned int*)(x + 0x040)
-+#define   FEC_FECFRST(x)					*(volatile unsigned int*)(x + 0x1C4)
-+
-+#define   FEC_MAX_FRM_SIZE                  (1518)
-+#define   FEC_MAXBUF_SIZE                   (1520)
-+
-+// Register values
-+#define   FEC_ECR_RESET                     (0x00000001)
-+#define   FEC_EIR_CLEAR                     (0xFFFFFFFF)
-+#define   FEC_EIR_RL                        (0x00100000)
-+#define   FEC_EIR_HBERR                     (0x80000000)
-+#define   FEC_EIR_BABR						(0x40000000)   // babbling receive error
-+#define   FEC_EIR_BABT						(0x20000000)   // babbling transmit error
-+#define   FEC_EIR_TXF		              	(0x08000000)   // transmit frame interrupt
-+#define   FEC_EIR_MII						(0x00800000)   // MII interrupt
-+#define   FEC_EIR_LC						(0x00200000)   // late collision
-+#define   FEC_EIR_XFUN						(0x00080000)   // transmit FIFO underrun
-+#define   FEC_EIR_XFERR						(0x00040000)   // transmit FIFO error
-+#define   FEC_EIR_RFERR						(0x00020000)   // receive FIFO error
-+#define   FEC_RCR_MAX_FRM_SIZE              (FEC_MAX_FRM_SIZE << 16)
-+#define   FEC_RCR_MII                       (0x00000004)
-+#define   FEC_FECRFCR_FAE					(0x00400000)   // frame accept error
-+#define   FEC_FECRFCR_RXW					(0x00200000)   // receive wait condition
-+#define   FEC_FECRFCR_UF					(0x00100000)   // receive FIFO underflow
-+#define   FEC_FECRFCR_FRM                   (0x08000000)
-+#define   FEC_FECRFCR_GR                    (0x7 << 24)
-+
-+#define   FEC_EIMR_DISABLE					(0x00000000)
-+
-+#define   FEC_FECRFAR_ALARM                 (0x300)
-+#define   FEC_FECTFCR_FRM                   (0x08000000)
-+#define   FEC_FECTFCR_GR                    (0x7 << 24)
-+#define   FEC_FECTFCR_FAE					(0x00400000)   // frame accept error
-+#define   FEC_FECTFCR_TXW					(0x00040000)   // transmit wait condition
-+#define   FEC_FECTFCR_UF					(0x00100000)   // transmit FIFO underflow
-+#define   FEC_FECTFCR_OF					(0x00080000)   // transmit FIFO overflow
-+
-+#define   FEC_FECTFAR_ALARM                 (0x100)
-+#define   FEC_FECTFWR_XWMRK                 (0x00000000)
-+
-+#define   FEC_FECTFSR_MSK                   (0xC0B00000)
-+#define   FEC_FECTFSR_TXW                   (0x40000000)   // transmit wait condition
-+#define   FEC_FECTFSR_FAE                   (0x00800000)   // frame accept error
-+#define   FEC_FECTFSR_UF                    (0x00200000)   // transmit FIFO underflow
-+#define   FEC_FECTFSR_OF                    (0x00100000)   // transmit FIFO overflow
-+
-+#define   FEC_FECRFSR_MSK                   (0x80F00000)
-+#define   FEC_FECRFSR_FAE                   (0x00800000)   // frame accept error
-+#define   FEC_FECRFSR_RXW                   (0x00400000)   // receive wait condition
-+#define   FEC_FECRFSR_UF                    (0x00200000)   // receive FIFO underflow
-+
-+#define   FEC_CTCWR_TFCW_CRC                (0x03000000)
-+#define   FEC_TCR_FDEN                      (0x00000004)
-+#define   FEC_TCR_HBC                       (0x00000002)
-+#define   FEC_RCR_DRT                       (0x00000002)
-+#define   FEC_EIMR_MASK                     (FEC_EIR_RL | FEC_EIR_HBERR)
-+#define   FEC_ECR_ETHEREN                   (0x00000002)
-+#define   FEC_FECTFCR_MSK                   (0x00FC0000)
-+#define   FEC_FECRFCR_MSK                   (0x00F80000)
-+#define   FEC_EIR_GRA                       (0x10000000)
-+#define   FEC_TCR_GTS                       (0x00000001)
-+#define   FEC_MIBC_ENABLE                   (0x00000000)
-+#define   FEC_MIB_LEN                       (228)
-+#define   FEC_PHY_ADDR                      (0x01)
-+
-+#define FEC_RX_DMA_PRI                      (6)
-+#define FEC_TX_DMA_PRI                      (6)
-+
-+#define   FEC_TX_BUF_NUMBER                 (8)
-+#define   FEC_RX_BUF_NUMBER                 (64)
-+
-+#define   FEC_TX_INDEX_MASK                 (0x7)
-+#define   FEC_RX_INDEX_MASK                 (0x3f)
-+
-+#define   FEC_RX_DESC_FEC0                  SYS_SRAM_FEC_START
-+#define   FEC_TX_DESC_FEC0                  FEC_RX_DESC_FEC0 + FEC_RX_BUF_NUMBER * sizeof(MCD_bufDescFec)
-+
-+#define   FEC_RX_DESC_FEC1                  SYS_SRAM_FEC_START + SYS_SRAM_FEC_SIZE/2
-+#define   FEC_TX_DESC_FEC1                  FEC_RX_DESC_FEC1 + FEC_RX_BUF_NUMBER * sizeof(MCD_bufDescFec)
-+
-+#define   FEC_EIR_MII                       (0x00800000)
-+#define   FEC_MMFR_READ                     (0x60020000)
-+#define   FEC_MMFR_WRITE                    (0x50020000)
-+
-+#define   FEC_FLAGS_RX                      (0x00000001)
-+
-+#define   FEC_CRCPOL                        (0xEDB88320)
-+
-+#define   FEC_MII_TIMEOUT                   (2)
-+#define   FEC_GR_TIMEOUT                    (1)
-+#define   FEC_TX_TIMEOUT                    (1)
-+#define   FEC_RX_TIMEOUT                    (1)
-+
-+#define   FEC_SW_RST                        0x2000000
-+#define   FEC_RST_CTL                       0x1000000
-+
-+int fec_read_mii(unsigned int base_addr, unsigned int pa, unsigned int ra,
-+		 unsigned int *data);
-+int fec_write_mii(unsigned int base_addr, unsigned int pa, unsigned int ra,
-+		  unsigned int data);
-+
-+#define init_transceiver ks8721_init_transceiver
---- /dev/null
-+++ b/drivers/net/fec/Kconfig
-@@ -0,0 +1,25 @@
-+config FEC_548x
-+	tristate "MCF547x/MCF548x Fast Ethernet Controller support"
-+	depends on M547X_8X
-+ 	help
-+	  The MCF547x and MCF548x have a built-in Fast Ethernet Controller.
-+	  Saying Y here will include support for this device in the kernel.
-+
-+	  To compile this driver as a module, choose M here: the module
-+	  will be called fecm.
-+
-+config FEC_548x_AUTO_NEGOTIATION
-+	bool "Enable Auto-Negotiation"
-+	depends on FEC_548x
-+	help
-+	  This option enables the FEC to automatically detect the 
-+	  half/full duplex mode and the network speed at initialization
-+	  If you want this, say Y.
-+
-+config FEC_548x_ENABLE_FEC2
-+	bool "Enable the second FEC"
-+	depends on FEC_548x
-+	help
-+	  This enables the second FEC on the 547x/548x. If you want to use
-+	  it, say Y.
-+
---- /dev/null
-+++ b/drivers/net/fec/ks8721.c
-@@ -0,0 +1,125 @@
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/ptrace.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/spinlock.h>
-+#include <linux/workqueue.h>
-+#include <linux/bitops.h>
-+
-+#if 0
-+#include <linux/config.h>
-+#include <linux/sched.h>
-+#include <linux/errno.h>
-+#include <asm/coldfire.h>
-+#endif
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+
-+#include   "fec.h"
-+#include   "ks8721.h"
-+
-+#ifdef   CONFIG_FEC_548x_AUTO_NEGOTIATION
-+#define   KS8721_AUTO_NEGOTIATION_ENABLE
-+#endif
-+
-+/************************************************************************
-+* +NAME: ks8721_init_transceiver
-+*
-+* DESCRIPTION: This function initializes the transceiver
-+*
-+* RETURNS: If no error occurs, this function returns zero.
-+*          Otherwise, it returns 1
-+*************************************************************************/
-+
-+int ks8721_init_transceiver(unsigned long base_addr, int *fduplex)
-+{
-+
-+	int data;
-+	unsigned long time;
-+	int flag = 1;
-+
-+	int result;
-+
-+	// Set the frequency of MII
-+	FEC_MSCR(base_addr) = FEC_MII_SPEED;
-+
-+	// Reset
-+	if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, KS8721_CTRL_RESET)))
-+		return result;
-+
-+	// Read back    
-+	if ((result = fec_read_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, &data)) != 0)
-+		return result;
-+
-+	// If reset bit is set, return
-+	if (data & KS8721_CTRL_RESET)
-+		return -ETIME;
-+
-+#ifdef KS8721_AUTO_NEGOTIATION_ENABLE
-+
-+	// Disable  the auto-negotiation 
-+	if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, 0)) != 0)
-+		return result;
-+
-+	// Set the auto-negotiation advertisement register 
-+	if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_ANADV, KS8721_ANADV_ADV_ALL)) != 0)
-+		return result;
-+
-+	// Enable the auto-negotiation
-+	if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, KS8721_CTRL_AN_ENABLE)) != 0)
-+		return result;
-+
-+	// Read PHY status register
-+	if ((result = fec_read_mii(base_addr, FEC_PHY_ADDR, KS8721_STAT, &data)) != 0)
-+		return result;
-+	// Set the current time
-+	time = jiffies;
-+
-+	// Wait for the auto-negotiation completion
-+	while (!(data & KS8721_STAT_ANCOMPLETE))
-+	{
-+
-+		if (jiffies - time > KS8721_TIMEOUT * HZ)
-+		{
-+			flag = 0;
-+			break;
-+		}
-+
-+		schedule();
-+
-+		// Read PHY status register
-+		if ((result = fec_read_mii(base_addr, FEC_PHY_ADDR, KS8721_STAT, &data)) != 0)
-+			return result;
-+	}
-+
-+	if (flag)
-+	{
-+		// Set the duplex flag     
-+		if (data & KS8721_STAT_FDUPLEX)
-+			*fduplex = 1;
-+		else
-+			*fduplex = 0;
-+
-+		return 0;
-+	}
-+
-+#endif
-+
-+	// Set the default mode (Full duplex, 100 Mbps) 
-+	if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, KS8721_CTRL_DEFAULT_MODE)) != 0)
-+		return result;
-+	*fduplex = KS8721_CTRL_DEFAULT_MODE & 0x100;
-+
-+	return 0;
-+
-+}
---- /dev/null
-+++ b/drivers/net/fec/ks8721.h
-@@ -0,0 +1,21 @@
-+
-+#define   FEC_MII_SPEED              (((unsigned int)(MCF_BUSCLK / 5000000)) << 1)
-+
-+// Numbers of the transceiver registers 
-+#define   KS8721_CTRL                0x00
-+#define   KS8721_ANADV               0x04
-+#define   KS8721_STAT                0x01
-+
-+// Register values
-+#define   KS8721_CTRL_RESET          0x8000
-+#define   KS8721_ANADV_ADV_ALL       0x01E1
-+#define   KS8721_CTRL_AN_ENABLE      0x1280
-+#define   KS8721_CTRL_DEFAULT_MODE   0x2100
-+#define   KS8721_STAT_ANCOMPLETE     0x0020
-+#define   KS8721_STAT_LINK           0x0004
-+#define   KS8721_STAT_FDUPLEX        0x5000
-+
-+// Timeout for the auto-negotiation mode
-+#define   KS8721_TIMEOUT             5
-+
-+int ks8721_init_transceiver(unsigned long base_addr, int *fduplex);
---- /dev/null
-+++ b/drivers/net/fec/Makefile
-@@ -0,0 +1,7 @@
-+#
-+# Makefile for the FEC ethernet driver
-+#
-+
-+obj-$(CONFIG_FEC_548x) += fecm.o
-+
-+fecm-objs := fec.o ks8721.o
---- a/drivers/net/fec.c
-+++ b/drivers/net/fec.c
-@@ -23,6 +23,9 @@
-  *
-  * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be)
-  * Copyright (c) 2004-2006 Macq Electronique SA.
-+ *
-+ * Coldfire bug fixes and cleanup by Kurt Mahan (kmahan@freescale.com)
-+ * Copyright 2007-2008 Freescale Semiconductor, Inc. All Rights Reserved.
-  */
- 
- #include <linux/module.h>
-@@ -51,7 +54,9 @@
- 
- #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
-     defined(CONFIG_M5272) || defined(CONFIG_M528x) || \
--    defined(CONFIG_M520x) || defined(CONFIG_M532x)
-+    defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
-+    defined(CONFIG_M5445X)
-+
- #include <asm/coldfire.h>
- #include <asm/mcfsim.h>
- #include "fec.h"
-@@ -82,6 +87,11 @@ static unsigned int fec_hw[] = {
- 	(MCF_MBAR+0x30000),
- #elif defined(CONFIG_M532x)
- 	(MCF_MBAR+0xfc030000),
-+#elif defined(CONFIG_M5445X)
-+	(MCF_MBAR+0xfc030000),
-+#if defined(CONFIG_FEC2)
-+	(MCF_MBAR+0xfc034000),
-+#endif
- #else
- 	&(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec),
- #endif
-@@ -172,7 +182,7 @@ typedef struct {
-  * account when setting it.
-  */
- #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
--    defined(CONFIG_M520x) || defined(CONFIG_M532x)
-+    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M5445X)
- #define	OPT_FRAME_SIZE	(PKT_MAXBUF_SIZE << 16)
- #else
- #define	OPT_FRAME_SIZE	0
-@@ -213,6 +223,7 @@ struct fec_enet_private {
- 	uint	phy_speed;
- 	phy_info_t const	*phy;
- 	struct work_struct phy_task;
-+	volatile fec_t	*phy_hwp;
- 
- 	uint	sequence_done;
- 	uint	mii_phy_task_queued;
-@@ -349,7 +360,8 @@ fec_enet_start_xmit(struct sk_buff *skb,
- 	if (bdp->cbd_bufaddr & 0x3) {
- 		unsigned int index;
- 		index = bdp - fep->tx_bd_base;
--		memcpy(fep->tx_bounce[index], (void *) bdp->cbd_bufaddr, bdp->cbd_datlen);
-+		memcpy(fep->tx_bounce[index],
-+		       (void *)skb->data, bdp->cbd_datlen);
- 		bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]);
- 	}
- 
-@@ -702,7 +714,7 @@ fec_enet_mii(struct net_device *dev)
- 	uint		mii_reg;
- 
- 	fep = netdev_priv(dev);
--	ep = fep->hwp;
-+	ep = fep->phy_hwp;
- 	mii_reg = ep->fec_mii_data;
- 
- 	spin_lock(&fep->lock);
-@@ -753,7 +765,7 @@ mii_queue(struct net_device *dev, int re
- 			mii_tail = mip;
- 		} else {
- 			mii_head = mii_tail = mip;
--			fep->hwp->fec_mii_data = regval;
-+			fep->phy_hwp->fec_mii_data = regval;
- 		}
- 	} else {
- 		retval = 1;
-@@ -1151,8 +1163,7 @@ static phy_info_t const phy_info_ks8721b
- };
- 
- /* ------------------------------------------------------------------------- */
--/* register definitions for the DP83848 */
--
-+/* register definitions for the DP83848 and DP83849 */
- #define MII_DP8384X_PHYSTST    16  /* PHY Status Register */
- 
- static void mii_parse_dp8384x_sr2(uint mii_reg, struct net_device *dev)
-@@ -1186,27 +1197,50 @@ static void mii_parse_dp8384x_sr2(uint m
- 		*s |= PHY_STAT_FAULT;
- }
- 
-+static phy_cmd_t const phy_cmd_dp8384x_ack_int[] = {
-+		{ mk_mii_end, }
-+	};
-+
-+static phy_cmd_t const phy_cmd_dp8384x_shutdown[] = {
-+		{ mk_mii_end, }
-+	};
-+
- static phy_info_t phy_info_dp83848= {
--	0x020005c9,
--	"DP83848",
-+	.id = 0x020005c9,
-+	.name = "DP83848",
- 
--	(const phy_cmd_t []) {  /* config */
-+	.config = (const phy_cmd_t []) {  /* config */
- 		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
- 		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
- 		{ mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 },
- 		{ mk_mii_end, }
- 	},
--	(const phy_cmd_t []) {  /* startup - enable interrupts */
-+	.startup = (const phy_cmd_t []) {  /* startup - enable interrupts */
- 		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- 		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
- 		{ mk_mii_end, }
- 	},
--	(const phy_cmd_t []) { /* ack_int - never happens, no interrupt */
-+	.ack_int = phy_cmd_dp8384x_ack_int,
-+	.shutdown = phy_cmd_dp8384x_shutdown,
-+};
-+
-+static phy_info_t phy_info_dp83849 = {
-+	.id = 0x020005ca,
-+	.name = "DP83849",
-+
-+	.config = (const phy_cmd_t []) {  /* config */
-+		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
-+		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
-+		{ mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 },
- 		{ mk_mii_end, }
- 	},
--	(const phy_cmd_t []) {  /* shutdown */
-+	.startup = (const phy_cmd_t []) {  /* startup - enable interrupts */
-+		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
-+		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
- 		{ mk_mii_end, }
- 	},
-+	.ack_int = phy_cmd_dp8384x_ack_int,
-+	.shutdown = phy_cmd_dp8384x_shutdown,
- };
- 
- /* ------------------------------------------------------------------------- */
-@@ -1218,6 +1252,7 @@ static phy_info_t const * const phy_info
- 	&phy_info_am79c874,
- 	&phy_info_ks8721bl,
- 	&phy_info_dp83848,
-+	&phy_info_dp83849,
- 	NULL
- };
- 
-@@ -1799,6 +1834,138 @@ static void __inline__ fec_uncache(unsig
- 
- /* ------------------------------------------------------------------------- */
- 
-+#elif defined(CONFIG_M5445X)
-+/*
-+ * Code specific for M5445X
-+ */
-+
-+static void __inline__ fec_request_intrs(struct net_device *dev)
-+{
-+	struct fec_enet_private *fep;
-+	int b;
-+	static const struct idesc {
-+		char *name;
-+		unsigned short irq;
-+	} *idp, id[] = {
-+	    { "fec(TXF)", 36 },
-+	    { "fec(TXB)", 37 },
-+	    { "fec(TXFIFO)", 38 },
-+	    { "fec(TXCR)", 39 },
-+	    { "fec(RXF)", 40 },
-+	    { "fec(RXB)", 41 },
-+	    { "fec(MII)", 42 },
-+	    { "fec(LC)", 43 },
-+	    { "fec(HBERR)", 44 },
-+	    { "fec(GRA)", 45 },
-+	    { "fec(EBERR)", 46 },
-+	    { "fec(BABT)", 47 },
-+	    { "fec(BABR)", 48 },
-+	    { NULL },
-+	};
-+
-+	fep = netdev_priv(dev);
-+	b = (fep->index) ? 77 : 64;
-+
-+	/* Setup interrupt handlers. */
-+	for (idp = id; idp->name; idp++) {
-+		if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED,
-+		    idp->name, dev) != 0)
-+			printk(KERN_ERR "FEC: Could not alloc %s IRQ(%d)!\n",
-+				idp->name, b+idp->irq);
-+	}
-+
-+	if (fep->index) {
-+		/* Configure RMII */
-+		MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC &
-+			MCF_GPIO_PAR_FEC_FEC1_MASK) |
-+			MCF_GPIO_PAR_FEC_FEC1_RMII_GPIO;
-+	} else {
-+		/* Configure RMII */
-+		MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC &
-+			MCF_GPIO_PAR_FEC_FEC0_MASK) |
-+			MCF_GPIO_PAR_FEC_FEC0_RMII_GPIO;
-+	}
-+
-+	/* Set up gpio outputs for MII lines on FEC0 */
-+	MCF_GPIO_PAR_FECI2C |= (0 |
-+		MCF_GPIO_PAR_FECI2C_MDIO0_MDIO0 |
-+		MCF_GPIO_PAR_FECI2C_MDC0_MDC0);
-+}
-+
-+static void __inline__ fec_set_mii(struct net_device *dev,
-+	struct fec_enet_private *fep)
-+{
-+	volatile fec_t *fecp;
-+
-+	fecp = fep->hwp;
-+	fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
-+	fecp->fec_x_cntrl = 0x00;
-+
-+	/*
-+	 * Set MII speed to 2.5 MHz
-+	 */
-+	fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
-+	fecp->fec_mii_speed = fep->phy_speed;
-+
-+	fec_restart(dev, 0);
-+}
-+
-+static void __inline__ fec_get_mac(struct net_device *dev)
-+{
-+	struct fec_enet_private *fep = netdev_priv(dev);
-+	volatile fec_t *fecp;
-+	unsigned char *iap, tmpaddr[ETH_ALEN];
-+
-+	fecp = fep->hwp;
-+
-+	if (FEC_FLASHMAC) {
-+		/*
-+		 * Get MAC address from FLASH.
-+		 * If it is all 1's or 0's, use the default.
-+		 */
-+		iap = FEC_FLASHMAC;
-+		if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
-+		    (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
-+			iap = fec_mac_default;
-+		if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
-+		    (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
-+			iap = fec_mac_default;
-+	} else {
-+		*((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
-+		*((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
-+		iap = &tmpaddr[0];
-+	}
-+
-+	memcpy(dev->dev_addr, iap, ETH_ALEN);
-+
-+	/* Adjust MAC if using default MAC address */
-+	if (iap == fec_mac_default)
-+		dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] +
-+			fep->index;
-+}
-+
-+static void __inline__ fec_enable_phy_intr(void)
-+{
-+}
-+
-+static void __inline__ fec_disable_phy_intr(void)
-+{
-+}
-+
-+static void __inline__ fec_phy_ack_intr(void)
-+{
-+}
-+
-+static void __inline__ fec_localhw_setup(void)
-+{
-+}
-+
-+static void __inline__ fec_uncache(unsigned long addr)
-+{
-+}
-+
-+/* ------------------------------------------------------------------------- */
-+
- 
- #else
- 
-@@ -2305,7 +2472,7 @@ fec_set_mac_address(struct net_device *d
- 
- }
- 
--/* Initialize the FEC Ethernet on 860T (or ColdFire 5272).
-+/* Initialize the FEC Ethernet.
-  */
-  /*
-   * XXX:  We need to clean up on failure exits here.
-@@ -2326,7 +2493,7 @@ int __init fec_enet_init(struct net_devi
- 
- 	/* Allocate memory for buffer descriptors.
- 	*/
--	mem_addr = __get_free_page(GFP_KERNEL);
-+	mem_addr = __get_free_page(GFP_DMA);
- 	if (mem_addr == 0) {
- 		printk("FEC: allocate descriptor memory failed?\n");
- 		return -ENOMEM;
-@@ -2339,6 +2506,11 @@ int __init fec_enet_init(struct net_devi
- 	fep->index = index;
- 	fep->hwp = fecp;
- 	fep->netdev = dev;
-+#ifdef CONFIG_FEC_SHARED_PHY
-+	fep->phy_hwp = (volatile fec_t *) fec_hw[index & ~1];
-+#else
-+	fep->phy_hwp = fecp;
-+#endif
- 
- 	/* Whack a reset.  We should wait for this.
- 	*/
-@@ -2375,7 +2547,7 @@ int __init fec_enet_init(struct net_devi
- 
- 		/* Allocate a page.
- 		*/
--		mem_addr = __get_free_page(GFP_KERNEL);
-+		mem_addr = __get_free_page(GFP_DMA);
- 		/* XXX: missing check for allocation failure */
- 
- 		fec_uncache(mem_addr);
-@@ -2400,7 +2572,7 @@ int __init fec_enet_init(struct net_devi
- 	bdp = fep->tx_bd_base;
- 	for (i=0, j=FEC_ENET_TX_FRPPG; i<TX_RING_SIZE; i++) {
- 		if (j >= FEC_ENET_TX_FRPPG) {
--			mem_addr = __get_free_page(GFP_KERNEL);
-+			mem_addr = __get_free_page(GFP_DMA);
- 			j = 1;
- 		} else {
- 			mem_addr += FEC_ENET_TX_FRSIZE;
-@@ -2462,7 +2634,11 @@ int __init fec_enet_init(struct net_devi
- 	 * remainder of the interface.
- 	 */
- 	fep->phy_id_done = 0;
-+#ifndef CONFIG_FEC_SHARED_PHY
- 	fep->phy_addr = 0;
-+#else
-+	fep->phy_addr = fep->index;
-+#endif
- 	mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy);
- 
- 	index++;
---- a/drivers/net/fec.h
-+++ b/drivers/net/fec.h
-@@ -14,7 +14,7 @@
- /****************************************************************************/
- 
- #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
--    defined(CONFIG_M520x) || defined(CONFIG_M532x)
-+    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M5445X)
- /*
-  *	Just figures, Motorola would have to change the offsets for
-  *	registers in the same peripheral device on different models
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -351,6 +351,8 @@ config MACB
- 
- source "drivers/net/arm/Kconfig"
- 
-+source "drivers/net/fec/Kconfig"
-+
- config AX88796
- 	tristate "ASIX AX88796 NE2000 clone support"
- 	depends on ARM || MIPS || SUPERH
-@@ -1973,7 +1975,7 @@ config 68360_ENET
- 
- config FEC
- 	bool "FEC ethernet controller (of ColdFire CPUs)"
--	depends on M523x || M527x || M5272 || M528x || M520x
-+	depends on M523x || M527x || M5272 || M528x || M520x || M5445X
- 	help
- 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
- 	  controller on some Motorola ColdFire processors.
-@@ -1985,6 +1987,12 @@ config FEC2
- 	  Say Y here if you want to use the second built-in 10/100 Fast
- 	  ethernet controller on some Motorola ColdFire processors.
- 
-+config FEC_SHARED_PHY
-+	bool "Shared PHY interface(on some ColdFire designs)"
-+	depends on FEC2
-+	help
-+	  Say Y here if both PHYs are controlled via a single channel.
-+
- config FEC_MPC52xx
- 	tristate "MPC52xx FEC driver"
- 	depends on PPC_MERGE && PPC_MPC52xx && PPC_BESTCOMM_FEC
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -226,6 +226,8 @@ obj-$(CONFIG_ENC28J60) += enc28j60.o
- 
- obj-$(CONFIG_MACB) += macb.o
- 
-+obj-$(CONFIG_FEC_548x) += fec/
-+
- obj-$(CONFIG_ARM) += arm/
- obj-$(CONFIG_DEV_APPLETALK) += appletalk/
- obj-$(CONFIG_TR) += tokenring/
---- a/drivers/pci/access.c
-+++ b/drivers/pci/access.c
-@@ -23,6 +23,7 @@ static DEFINE_SPINLOCK(pci_lock);
- #define PCI_word_BAD (pos & 1)
- #define PCI_dword_BAD (pos & 3)
- 
-+#ifdef NL_ORIGINAL
- #define PCI_OP_READ(size,type,len) \
- int pci_bus_read_config_##size \
- 	(struct pci_bus *bus, unsigned int devfn, int pos, type *value)	\
-@@ -37,7 +38,20 @@ int pci_bus_read_config_##size \
- 	spin_unlock_irqrestore(&pci_lock, flags);			\
- 	return res;							\
- }
--
-+#else /* NL_ORIGINAL */
-+#define PCI_OP_READ(size,type,len) \
-+int pci_bus_read_config_##size \
-+        (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \
-+{                                                                       \
-+        int res;                                                        \
-+        unsigned long flags;                                            \
-+        if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;       \
-+        spin_lock_irqsave(&pci_lock, flags);                            \
-+        res = bus->ops->read(bus, devfn, pos, len, (u32 *)value);       \
-+        spin_unlock_irqrestore(&pci_lock, flags);                       \
-+        return res;                                                     \
-+}
-+#endif /* NL_ORIGINAL */
- #define PCI_OP_WRITE(size,type,len) \
- int pci_bus_write_config_##size \
- 	(struct pci_bus *bus, unsigned int devfn, int pos, type value)	\
---- a/drivers/pci/Makefile
-+++ b/drivers/pci/Makefile
-@@ -39,6 +39,7 @@ obj-$(CONFIG_PPC) += setup-bus.o
- obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
- obj-$(CONFIG_X86_VISWS) += setup-irq.o
- obj-$(CONFIG_MN10300) += setup-bus.o
-+obj-$(CONFIG_M54455) += setup-bus.o setup-irq.o
- 
- #
- # ACPI Related PCI FW Functions
---- a/drivers/rtc/rtc-rs5c372.c
-+++ b/drivers/rtc/rtc-rs5c372.c
-@@ -15,7 +15,6 @@
- 
- #define DRV_VERSION "0.5"
- 
--
- /*
-  * Ricoh has a family of I2C based RTCs, which differ only slightly from
-  * each other.  Differences center on pinout (e.g. how many interrupts,
-@@ -60,6 +59,15 @@
- /* to read (style 1) or write registers starting at R */
- #define RS5C_ADDR(R)		(((R) << 4) | 0)
- 
-+#ifdef CONFIG_M547X_8X
-+#define DRV_NAME "rv5c387a"
-+/* i2c configuration */
-+#define RV5C387_I2C_ADDR 0x32
-+static unsigned short normal_i2c[] = {
-+	RV5C387_I2C_ADDR, I2C_CLIENT_END
-+};
-+I2C_CLIENT_INSMOD; /* defines addr_data */
-+#endif
- 
- enum rtc_type {
- 	rtc_undef = 0,
-@@ -506,14 +514,14 @@ static int rs5c372_probe(struct i2c_clie
- 		err = -ENODEV;
- 		goto exit;
- 	}
--
--	if (!(rs5c372 = kzalloc(sizeof(struct rs5c372), GFP_KERNEL))) {
-+	rs5c372 = kzalloc(sizeof(struct rs5c372), GFP_KERNEL);
-+	if (!rs5c372) {
- 		err = -ENOMEM;
- 		goto exit;
- 	}
- 
- 	/* we read registers 0x0f then 0x00-0x0f; skip the first one */
--	rs5c372->regs=&rs5c372->buf[1];
-+	rs5c372->regs = &rs5c372->buf[1];
- 
- 	rs5c372->client = client;
- 	i2c_set_clientdata(client, rs5c372);
-@@ -605,7 +613,7 @@ static int rs5c372_probe(struct i2c_clie
- 			case rtc_rv5c386:	s = "rv5c386"; break;
- 			case rtc_rv5c387a:	s = "rv5c387a"; break;
- 			default:		s = "chip"; break;
--			}; s;}),
-+			}; s; }),
- 			rs5c372->time24 ? "24hr" : "am/pm"
- 			);
- 
-@@ -645,12 +653,61 @@ static int rs5c372_remove(struct i2c_cli
- 	return 0;
- }
- 
-+#ifdef CONFIG_M547X_8X
-+static int rv5c387_probe(struct i2c_adapter *adapter, int addr, int kind)
-+{
-+	int rc = 0;
-+	struct i2c_client *new_client = NULL;
-+
-+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
-+		rc = -ENODEV;
-+		printk(KERN_DEBUG "%s i2c_check_functionality\n", __FUNCTION__);
-+		goto failout;
-+	}
-+
-+	new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-+	if (new_client == NULL) {
-+		rc = -ENOMEM;
-+		printk(KERN_DEBUG "%s kzalloc new_client\n", __FUNCTION__);
-+		goto failout;
-+	}
-+
-+	new_client->addr = addr;
-+	new_client->adapter = adapter;
-+	new_client->driver = &rs5c372_driver;
-+	new_client->flags = 0;
-+	strcpy(new_client->name, DRV_NAME);
-+
-+	rc = i2c_attach_client(new_client);
-+	if (rc < 0) {
-+		printk(KERN_DEBUG "%s i2c_attach_client\n", __FUNCTION__);
-+		goto failout;
-+	}
-+
-+	rs5c372_probe(new_client);
-+	return 0;
-+failout:
-+	kfree(new_client);
-+	return rc;
-+}
-+
-+static int
-+rv5c387_attach_adapter(struct i2c_adapter *adapter)
-+{
-+	return i2c_probe(adapter, &addr_data, rv5c387_probe);
-+}
-+#endif
-+
- static struct i2c_driver rs5c372_driver = {
- 	.driver		= {
- 		.name	= "rtc-rs5c372",
- 	},
-+#ifdef CONFIG_M547X_8X
-+	.attach_adapter = &rv5c387_attach_adapter,
-+#else
- 	.probe		= rs5c372_probe,
- 	.remove		= rs5c372_remove,
-+#endif
- };
- 
- static __init int rs5c372_init(void)
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -979,6 +979,12 @@ config SERIAL_COLDFIRE
- 	  This driver supports the built-in serial ports of the Motorola ColdFire
- 	  family of CPUs.
- 
-+config SERIAL_COLDFIRE_IRDA
-+	bool "ColdFire IRDA support"
-+	depends on SERIAL_COLDFIRE
-+	help
-+	  This driver supports IRDA on the Motorola ColdFire.
-+
- config SERIAL_MCF
- 	bool "Coldfire serial support (new style driver)"
- 	depends on COLDFIRE
---- a/drivers/serial/mcfserial.c
-+++ b/drivers/serial/mcfserial.c
-@@ -45,7 +45,14 @@
- #include <asm/coldfire.h>
- #include <asm/mcfsim.h>
- #include <asm/mcfuart.h>
-+#if defined(CONFIG_M547X_8X)
-+#include <asm/m5485sim.h>
-+#include <asm/m5485psc.h>
-+#include <asm/m5485gpio.h>
-+#endif
-+#ifdef CONFIG_NETtel
- #include <asm/nettel.h>
-+#endif
- #include <asm/uaccess.h>
- #include "mcfserial.h"
- 
-@@ -61,7 +68,8 @@ struct timer_list mcfrs_timer_struct;
- #define	CONSOLE_BAUD_RATE	38400
- #define	DEFAULT_CBAUD		B38400
- #elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \
--      defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO)
-+      defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO) || \
-+      defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X)
- #define CONSOLE_BAUD_RATE 	115200
- #define DEFAULT_CBAUD		B115200
- #elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
-@@ -94,12 +102,17 @@ static struct tty_driver *mcfrs_serial_d
- #undef SERIAL_DEBUG_FLOW
- 
- #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
--    defined(CONFIG_M520x) || defined(CONFIG_M532x)
-+    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M5445X) || \
-+    defined(CONFIG_M547X_8X)
- #define	IRQBASE	(MCFINT_VECBASE+MCFINT_UART0)
- #else
- #define	IRQBASE	73
- #endif
- 
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+#define SERIAL_IRDA_LINE (2)
-+#endif
-+
- /*
-  *	Configuration table, UARTs to look for at startup.
-  */
-@@ -114,7 +127,11 @@ static struct mcf_serial mcfrs_table[] =
- 	{  /* ttyS1 */
- 		.magic = 0,
- 		.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2),
-+#if defined(CONFIG_M547X_8X)
-+		.irq = IRQBASE-1,
-+#else
- 		.irq = IRQBASE+1,
-+#endif
- 		.flags = ASYNC_BOOT_AUTOCONF,
- 	},
- #endif
-@@ -122,7 +139,11 @@ static struct mcf_serial mcfrs_table[] =
- 	{  /* ttyS2 */
- 		.magic = 0,
- 		.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE3),
-+#if defined(CONFIG_M547X_8X)
-+		.irq = IRQBASE-2,
-+#else
- 		.irq = IRQBASE+2,
-+#endif
- 		.flags = ASYNC_BOOT_AUTOCONF,
- 	},
- #endif
-@@ -130,7 +151,11 @@ static struct mcf_serial mcfrs_table[] =
- 	{  /* ttyS3 */
- 		.magic = 0,
- 		.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE4),
-+#if defined(CONFIG_M547X_8X)
-+		.irq = IRQBASE-3,
-+#else
- 		.irq = IRQBASE+3,
-+#endif
- 		.flags = ASYNC_BOOT_AUTOCONF,
- 	},
- #endif
-@@ -372,6 +397,9 @@ static inline void receive_chars(struct 
- static inline void transmit_chars(struct mcf_serial *info)
- {
- 	volatile unsigned char	*uartp;
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+	int i;
-+#endif
- 
- 	uartp = info->addr;
- 
-@@ -383,13 +411,36 @@ static inline void transmit_chars(struct
- 	}
- 
- 	if ((info->xmit_cnt <= 0) || info->tty->stopped) {
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+		if (info->line == SERIAL_IRDA_LINE) {
-+			/* Enable receiver for IRDA */
-+			uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX;
-+			/* reset RX */
-+			uartp[MCFUART_UCR] = MCFUART_UCR_TXENABLE | MCFUART_UCR_RXENABLE;
-+		}
-+#endif
- 		info->imr &= ~MCFUART_UIR_TXREADY;
- 		uartp[MCFUART_UIMR] = info->imr;
- 		return;
- 	}
- 
- 	while (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) {
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+		if (info->line == SERIAL_IRDA_LINE) {
-+			while (!(uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY));
-+			i = 0;
-+			/* delay for settle */
-+#if defined(CONFIG_M548X)
-+			udelay(1);
-+#elif defined(CONFIG_M547X)
-+			udelay(2);
-+#else
-+			while (i++ < 25000) udelay(1);
-+#endif
-+		}
-+#endif
- 		uartp[MCFUART_UTB] = info->xmit_buf[info->xmit_tail++];
-+
- 		info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
- 		info->stats.tx++;
- 		if (--info->xmit_cnt <= 0)
-@@ -409,7 +460,12 @@ irqreturn_t mcfrs_interrupt(int irq, voi
- 	struct mcf_serial	*info;
- 	unsigned char		isr;
- 
-+/* JKM -- revisit! IRQ compute */
-+#if defined(CONFIG_M547X_8X)
-+	info = &mcfrs_table[(IRQBASE - irq)];
-+#else
- 	info = &mcfrs_table[(irq - IRQBASE)];
-+#endif
- 	isr = info->addr[MCFUART_UISR] & info->imr;
- 
- 	if (isr & MCFUART_UIR_RXREADY)
-@@ -541,6 +597,28 @@ static int startup(struct mcf_serial * i
- 	 */
- 	mcfrs_change_speed(info);
- 
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+	if (info->line == SERIAL_IRDA_LINE) {
-+		/* Put PSC in IrDA mode */
-+		MCF_PSC_SICR(info->line) = MCF_PSC_SICR_SIM_SIR;
-+
-+		/* Set pulse width to 1.6 uS */
-+		MCF_PSC_IRSDR(info->line) = (uint8_t)
-+					    (16 * (CONFIG_MCFCLK / 10000000));
-+		MCF_PSC_IRCR1(info->line) = MCF_PSC_IRCR1_SPUL;
-+		MCF_PSC_IRCR2(info->line) = 0;
-+
-+		/* Enable RTS to send */
-+		MCF_PSC_OPSET(info->line) = MCF_PSC_OPSET_RTS;
-+
-+		/* Setup FIFO Alarms */
-+		MCF_PSC_RFAR(info->line) = MCF_PSC_RFAR_ALARM(248);
-+		MCF_PSC_TFAR(info->line) = MCF_PSC_TFAR_ALARM(248);
-+
-+		MCF_PSC_RFCR(info->line) = MCF_PSC_RFCR_FRMEN | MCF_PSC_RFCR_GR(4);
-+		MCF_PSC_TFCR(info->line) = MCF_PSC_TFCR_FRMEN | MCF_PSC_RFCR_GR(4);
-+	}
-+#endif
- 	/*
- 	 * Lastly enable the UART transmitter and receiver, and
- 	 * interrupt enables.
-@@ -562,10 +640,20 @@ static void shutdown(struct mcf_serial *
- {
- 	volatile unsigned char	*uartp;
- 	unsigned long		flags;
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+	unsigned long 		delay_counter = 0;
-+#endif
- 
- 	if (!(info->flags & ASYNC_INITIALIZED))
- 		return;
--
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+	uartp = (volatile unsigned char *) info->addr;
-+	while (!(uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY)) {
-+		if(delay_counter++ > 25000)
-+			break;
-+		udelay(10);
-+	}
-+#endif
- #ifdef SERIAL_DEBUG_OPEN
- 	printk("Shutting down serial port %d (irq %d)....\n", info->line,
- 	       info->irq);
-@@ -794,10 +882,19 @@ static int mcfrs_write(struct tty_struct
- 
- 	local_irq_disable();
- 	uartp = info->addr;
-+
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+	if (info->line == SERIAL_IRDA_LINE) {
-+		/* Disable IRDA receiver*/
-+		uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX;    /* reset RX */
-+		uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX;    /* reset TX */
-+
-+		uartp[MCFUART_UCR] = MCFUART_UCR_TXENABLE;
-+	}
-+#endif
- 	info->imr |= MCFUART_UIR_TXREADY;
- 	uartp[MCFUART_UIMR] = info->imr;
- 	local_irq_restore(flags);
--
- 	return total;
- }
- 
-@@ -858,9 +955,21 @@ static void mcfrs_throttle(struct tty_st
- 
- 	if (serial_paranoia_check(info, tty->name, "mcfrs_throttle"))
- 		return;
--	
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+	if (I_IXOFF(tty)) {
-+		/* Force STOP_CHAR (xoff) out */
-+		volatile unsigned char	*uartp;
-+		unsigned long		flags;
-+		uartp = (volatile unsigned char *) info->addr;
-+		local_irq_save(flags);
-+		info->imr |= MCFUART_UIR_TXREADY;
-+		uartp[MCFUART_UIMR] = info->imr;
-+		local_irq_restore(flags);
-+	}
-+#else
- 	if (I_IXOFF(tty))
- 		info->x_char = STOP_CHAR(tty);
-+#endif
- 
- 	/* Turn off RTS line (do this atomic) */
- }
-@@ -881,8 +990,22 @@ static void mcfrs_unthrottle(struct tty_
- 	if (I_IXOFF(tty)) {
- 		if (info->x_char)
- 			info->x_char = 0;
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+		else {
-+			/* Force START_CHAR (xon) out */
-+			volatile unsigned char	*uartp;
-+			unsigned long		flags;
-+			info->x_char = START_CHAR(tty);
-+			uartp = (volatile unsigned char *) info->addr;
-+			local_irq_save(flags);
-+			info->imr |= MCFUART_UIR_TXREADY;
-+			uartp[MCFUART_UIMR] = info->imr;
-+			local_irq_restore(flags);
-+		}
-+#else
- 		else
- 			info->x_char = START_CHAR(tty);
-+#endif
- 	}
- 
- 	/* Assert RTS line (do this atomic) */
-@@ -1130,12 +1253,17 @@ static int mcfrs_ioctl(struct tty_struct
- static void mcfrs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
- {
- 	struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+	int i = 0;	/* hush GCC */
-+#endif
- 
- 	if (tty->termios->c_cflag == old_termios->c_cflag)
- 		return;
- 
-+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
-+	while (i++ < 35000) udelay(1);
-+#endif
- 	mcfrs_change_speed(info);
--
- 	if ((old_termios->c_cflag & CRTSCTS) &&
- 	    !(tty->termios->c_cflag & CRTSCTS)) {
- 		tty->hw_stopped = 0;
-@@ -1604,6 +1732,36 @@ static void mcfrs_irqinit(struct mcf_ser
- 		/* GPIOs also must be initalized, depends on board */
- 		break;
- 	}
-+#elif defined(CONFIG_M5445X)
-+	volatile unsigned char *uartp;
-+	uartp = info->addr;
-+	switch (info->line) {
-+	case 0:
-+		MCF_GPIO_PAR_UART |= 0x000F;
-+		break;
-+	case 1:
-+		MCF_GPIO_PAR_UART |= 0x0FF0;
-+		break;
-+	case 2:
-+		/* GPIOs also must be initalized, depends on board */
-+		break;
-+	}
-+#elif defined(CONFIG_M547X_8X)
-+	volatile unsigned char  *uartp;
-+	uartp = (volatile unsigned char *)info->addr;
-+
-+	if (info->line > 3) {
-+		printk("SERIAL: don't know how to handle UART %d interrupt?\n",
-+			info->line);
-+		return;
-+	}
-+
-+	/* Set GPIO port register to enable PSC(port) signals */
-+	MCF_PAR_PSCn(info->line) = (0
-+		| MCF_PAR_PSC_TXD
-+		| MCF_PAR_PSC_RXD);
-+
-+	MCF_ICR(info->irq - 64) = ILP_PSCn(info->line);
- #else
- 	volatile unsigned char	*icrp, *uartp;
- 
-@@ -1966,7 +2124,9 @@ struct console mcfrs_console = {
- 
- static int __init mcfrs_console_init(void)
- {
-+#if !(defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X))
- 	register_console(&mcfrs_console);
-+#endif
- 	return 0;
- }
- 
---- /dev/null
-+++ b/drivers/spi/coldfire_edma.c
-@@ -0,0 +1,446 @@
-+/*
-+ *
-+ * coldfire_edma.c - eDMA driver for Coldfire MCF5445x
-+ *
-+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <asm/virtconvert.h>
-+#include <asm/coldfire.h>
-+#include <linux/fs.h>
-+#include <linux/cdev.h>
-+#include <linux/seq_file.h>
-+#include <linux/proc_fs.h>
-+#ifdef CONFIG_M5445X
-+#include <asm/mcf5445x_edma.h>
-+#include <asm/mcf5445x_intc.h>
-+#endif /* CONFIG_M5445X */
-+#include <asm/coldfire_edma.h>
-+
-+/*
-+ * Callback handler data for each TCD
-+ */
-+struct edma_isr_record {
-+	edma_irq_handler irq_handler;	  /* interrupt handler */
-+	edma_error_handler error_handler; /* error interrupt handler */
-+	void *arg;			  /* argument to pass back */
-+	int allocated;			  /* busy flag */
-+	spinlock_t *lock;		  /* spin lock (optional) */
-+	const char *device_id;		  /* dev id string, used in procfs */
-+};
-+
-+/*
-+ * Device structure
-+ */
-+struct coldfire_edma_dev {
-+	struct cdev cdev;		  /* character device */
-+	struct edma_isr_record dma_interrupt_handlers[EDMA_CHANNELS];
-+};
-+
-+/* allocated major device number */
-+static int coldfire_dma_major;
-+
-+/* device driver structure */
-+static struct coldfire_edma_dev *devp = NULL;
-+
-+/* device driver file operations */
-+struct file_operations coldfire_edma_fops = {
-+	.owner = THIS_MODULE,
-+};
-+
-+/**
-+ * dmaisr - eDMA channel interrupt handler
-+ * @irq: interrupt number
-+ * @dev_id: argument
-+ */
-+static int dmaisr(int irq, void *dev_id)
-+{
-+	int channel = irq - EDMA_INT_CONTROLLER_BASE - EDMA_INT_CHANNEL_BASE;
-+	int result = IRQ_HANDLED;
-+
-+	if ((devp != NULL) &&
-+	    (devp->dma_interrupt_handlers[channel].irq_handler)) {
-+		/* call user irq handler */
-+		if (devp->dma_interrupt_handlers[channel].lock)
-+			spin_lock(devp->dma_interrupt_handlers[channel].lock);
-+
-+		result = devp->dma_interrupt_handlers[channel].irq_handler(
-+			channel, devp->dma_interrupt_handlers[channel].arg);
-+
-+   		if (devp->dma_interrupt_handlers[channel].lock)
-+			spin_unlock(devp->dma_interrupt_handlers[channel].lock);
-+	} else {
-+		/* no irq handler so just ack it */
-+		confirm_edma_interrupt_handled(channel);
-+		printk(EDMA_DRIVER_NAME ": No handler for DMA channel %d\n",
-+		       channel);
-+	}
-+
-+	return result;
-+}
-+
-+/**
-+ * dma_error_isr - eDMA error interrupt handler
-+ * @irq: interrupt number
-+ * @dev_id: argument
-+ */
-+static int dma_error_isr(int irq, void* dev_id)
-+{
-+	u16 err;
-+	int i;
-+
-+	err = MCF_EDMA_ERR;
-+	for (i=0; i<EDMA_CHANNELS; i++) {
-+		if (err & (1<<i)) {
-+			if (devp!=NULL && devp->dma_interrupt_handlers[i].error_handler)
-+				devp->dma_interrupt_handlers[i].error_handler(i, devp->dma_interrupt_handlers[i].arg);
-+			else
-+				printk(KERN_WARNING EDMA_DRIVER_NAME ": DMA error on channel %d\n", i);
-+		}
-+	}
-+
-+	MCF_EDMA_CERR = MCF_EDMA_CERR_CAER;
-+	return IRQ_HANDLED;
-+}
-+
-+/**
-+ * set_edma_params - Set transfer control descriptor (TCD)
-+ * @channel: channel number
-+ * @source: source address
-+ * @dest: destination address
-+ * @attr: attributes
-+ * @soff: source offset
-+ * @nbytes: number of bytes to be transfered in minor loop
-+ * @slast: last source address adjustment
-+ * @citer: major loop count
-+ * @biter: beginning minor loop count
-+ * @doff: destination offset
-+ * @dlast_sga: last destination address adjustment
-+ * @major_int: generate interrupt after each major loop
-+ * @disable_req: disable DMA request after major loop
-+ */
-+void set_edma_params(int channel, u32 source, u32 dest,
-+	u32 attr, u32 soff, u32 nbytes, u32 slast,
-+	u32 citer, u32 biter, u32 doff, u32 dlast_sga,
-+	int major_int, int disable_req)
-+{
-+
-+	if (channel<0 || channel>EDMA_CHANNELS)
-+		return;
-+
-+	MCF_EDMA_TCD_SADDR(channel) = source;
-+	MCF_EDMA_TCD_DADDR(channel) = dest;
-+	MCF_EDMA_TCD_ATTR(channel) = attr;
-+	MCF_EDMA_TCD_SOFF(channel) = MCF_EDMA_TCD_SOFF_SOFF(soff);
-+	MCF_EDMA_TCD_NBYTES(channel) = MCF_EDMA_TCD_NBYTES_NBYTES(nbytes);
-+	MCF_EDMA_TCD_SLAST(channel) = MCF_EDMA_TCD_SLAST_SLAST(slast);
-+	MCF_EDMA_TCD_CITER(channel) = MCF_EDMA_TCD_CITER_CITER(citer);
-+	MCF_EDMA_TCD_BITER(channel)=MCF_EDMA_TCD_BITER_BITER(biter);
-+	MCF_EDMA_TCD_DOFF(channel) = MCF_EDMA_TCD_DOFF_DOFF(doff);
-+	MCF_EDMA_TCD_DLAST_SGA(channel) = MCF_EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga);
-+
-+	/* interrupt at the end of major loop */
-+	if (major_int)
-+		MCF_EDMA_TCD_CSR(channel) |= MCF_EDMA_TCD_CSR_INT_MAJOR;
-+	else
-+		MCF_EDMA_TCD_CSR(channel) &= ~MCF_EDMA_TCD_CSR_INT_MAJOR;
-+
-+	/* disable request at the end of major loop of transfer or not*/
-+	if (disable_req)
-+		MCF_EDMA_TCD_CSR(channel) |= MCF_EDMA_TCD_CSR_D_REQ;
-+	else
-+		MCF_EDMA_TCD_CSR(channel) &= ~MCF_EDMA_TCD_CSR_D_REQ;
-+}
-+EXPORT_SYMBOL(set_edma_params);
-+
-+/**
-+ * init_edma - Initialize the eDMA controller
-+ */
-+void init_edma(void)
-+{
-+	MCF_EDMA_CR = 0;
-+}
-+EXPORT_SYMBOL(init_edma);
-+
-+/**
-+ * request_edma_channel - Request an eDMA channel
-+ * @channel: channel number
-+ * @handler: dma handler
-+ * @error_handler: dma error handler
-+ * @arg: argument to pass back
-+ * @lock: optional spinlock to hold over interrupt
-+ * @device_id: device id
-+ *
-+ * Returns 0 if success or a negative value if failure
-+ */
-+int request_edma_channel(int channel,
-+	edma_irq_handler handler,
-+	edma_error_handler error_handler,
-+	void *arg,
-+	spinlock_t *lock,
-+	const char *device_id )
-+{
-+	if (devp!=NULL && channel>=0 && channel<=EDMA_CHANNELS) {
-+		if (devp->dma_interrupt_handlers[channel].allocated)
-+			return -EBUSY;
-+
-+		devp->dma_interrupt_handlers[channel].allocated = 1;
-+		devp->dma_interrupt_handlers[channel].irq_handler = handler;
-+		devp->dma_interrupt_handlers[channel].error_handler = error_handler;
-+		devp->dma_interrupt_handlers[channel].arg = arg;
-+		devp->dma_interrupt_handlers[channel].lock = lock;
-+		devp->dma_interrupt_handlers[channel].device_id = device_id;
-+		return 0;
-+	}
-+	return -EINVAL;
-+}
-+EXPORT_SYMBOL(request_edma_channel);
-+
-+/**
-+ * set_edma_callback - Update the channel callback/arg
-+ * @channel: channel number
-+ * @handler: dma handler
-+ * @error_handler: dma error handler
-+ * @arg: argument to pass back
-+ *
-+ * Returns 0 if success or a negative value if failure
-+ */
-+int set_edma_callback(int channel,
-+	edma_irq_handler handler,
-+	edma_error_handler error_handler,
-+	void *arg )
-+{
-+	if (devp!=NULL && channel>=0 && channel<=EDMA_CHANNELS &&
-+	    devp->dma_interrupt_handlers[channel].allocated) {
-+		devp->dma_interrupt_handlers[channel].irq_handler = handler;
-+		devp->dma_interrupt_handlers[channel].error_handler = error_handler;
-+		devp->dma_interrupt_handlers[channel].arg = arg;
-+		return 0;
-+	}
-+	return -EINVAL;
-+}
-+EXPORT_SYMBOL(set_edma_callback);
-+
-+/**
-+ * free_edma_channel - Free the edma channel
-+ * @channel: channel number
-+ * @arg: argument created with
-+ *
-+ * Returns 0 if success or a negative value if failure
-+ */
-+int free_edma_channel(int channel, void *arg)
-+{
-+	if (devp!=NULL && channel>=0 && channel<=EDMA_CHANNELS) {
-+		if (devp->dma_interrupt_handlers[channel].allocated) {
-+#if 0
-+			if (devp->dma_interrupt_handlers[channel].arg != arg)
-+				return -EBUSY;
-+#endif
-+
-+			devp->dma_interrupt_handlers[channel].allocated = 0;
-+			devp->dma_interrupt_handlers[channel].arg = NULL;
-+			devp->dma_interrupt_handlers[channel].irq_handler = NULL;
-+			devp->dma_interrupt_handlers[channel].error_handler = NULL;
-+			devp->dma_interrupt_handlers[channel].lock = NULL;
-+		}
-+		return 0;
-+	}
-+	return -EINVAL;
-+}
-+EXPORT_SYMBOL(free_edma_channel);
-+
-+/**
-+ * coldfire_edma_cleanup - cleanup driver allocated resources
-+ */
-+static void coldfire_edma_cleanup(void)
-+{
-+	dev_t devno;
-+	int i;
-+
-+	/* free interrupts/memory */
-+	if (devp) {
-+		for (i=0; i<EDMA_CHANNELS; i++)
-+			free_irq(EDMA_INT_BASE+i, devp);
-+
-+		free_irq(EDMA_INT_BASE+EDMA_INT_ERR, devp);
-+		cdev_del(&devp->cdev);
-+		kfree(devp);
-+	}
-+
-+	/* unregister character device */
-+	devno = MKDEV(coldfire_dma_major, 0);
-+	unregister_chrdev_region(devno, 1);
-+}
-+
-+#ifdef CONFIG_PROC_FS
-+/*
-+ * proc file system support
-+ */
-+
-+#define FREE_CHANNEL "free"
-+#define DEVICE_UNKNOWN "device unknown"
-+
-+/**
-+ * proc_edma_show - print out proc info
-+ * @m: seq_file
-+ * @v:
-+ */
-+static int proc_edma_show(struct seq_file *m, void *v)
-+{
-+	int i;
-+
-+	if (devp == NULL)
-+		return 0;
-+
-+	for (i = 0 ; i < EDMA_CHANNELS ; i++) {
-+		if (devp->dma_interrupt_handlers[i].allocated) {
-+			if (devp->dma_interrupt_handlers[i].device_id)
-+		    		seq_printf(m, "%2d: %s\n", i, devp->dma_interrupt_handlers[i].device_id);
-+			else
-+				seq_printf(m, "%2d: %s\n", i, DEVICE_UNKNOWN);
-+		} else
-+			seq_printf(m, "%2d: %s\n", i, FREE_CHANNEL);
-+	}
-+	return 0;
-+}
-+
-+/**
-+ * proc_edma_open - open the proc file
-+ * @inode: inode ptr
-+ * @file: file ptr
-+ */
-+static int proc_edma_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, proc_edma_show, NULL);
-+}
-+
-+static const struct file_operations proc_edma_operations = {
-+	.open		= proc_edma_open,
-+	.read		= seq_read,
-+	.llseek		= seq_lseek,
-+	.release	= single_release,
-+};
-+
-+/**
-+ * proc_edma_init - initialize proc filesystem
-+ */
-+static int __init proc_edma_init(void)
-+{
-+	struct proc_dir_entry *e;
-+
-+	e = create_proc_entry("edma", 0, NULL);
-+	if (e)
-+		e->proc_fops = &proc_edma_operations;
-+
-+	return 0;
-+}
-+
-+#endif
-+
-+/**
-+ * coldfire_edma_init - eDMA module init
-+ */
-+static int __init coldfire_edma_init(void)
-+{
-+	dev_t dev;
-+	int result;
-+	int i;
-+
-+	/* allocate free major number */
-+	result = alloc_chrdev_region(&dev, DMA_DEV_MINOR, 1, EDMA_DRIVER_NAME);
-+	if (result < 0) {
-+		printk(KERN_WARNING EDMA_DRIVER_NAME": can't get major %d\n",
-+		       result);
-+		return result;
-+	}
-+	coldfire_dma_major = MAJOR(dev);
-+
-+	/* allocate device driver structure */
-+	devp = kmalloc(sizeof(struct coldfire_edma_dev), GFP_KERNEL);
-+	if (!devp) {
-+		result = -ENOMEM;
-+		goto fail;
-+	}
-+
-+	/* init handlers (no handlers for beginning) */
-+   	for (i = 0; i < EDMA_CHANNELS; i++) {
-+		devp->dma_interrupt_handlers[i].irq_handler = NULL;
-+		devp->dma_interrupt_handlers[i].error_handler = NULL;
-+		devp->dma_interrupt_handlers[i].arg = NULL;
-+		devp->dma_interrupt_handlers[i].allocated = 0;
-+		devp->dma_interrupt_handlers[i].lock = NULL;
-+		devp->dma_interrupt_handlers[i].device_id = NULL;
-+	}
-+
-+	/* register char device */
-+	cdev_init(&devp->cdev, &coldfire_edma_fops);
-+	devp->cdev.owner = THIS_MODULE;
-+	devp->cdev.ops = &coldfire_edma_fops;
-+	result = cdev_add(&devp->cdev, dev, 1);
-+	if (result) {
-+		printk(KERN_NOTICE EDMA_DRIVER_NAME
-+		       ": Error %d adding coldfire-dma device\n", result);
-+		result = -ENODEV;
-+		goto fail;
-+	}
-+
-+	/* request/enable irq for each eDMA channel */
-+	for (i = 0; i < EDMA_CHANNELS;i++) {
-+		result = request_irq(EDMA_INT_BASE + i,
-+				     dmaisr, IRQF_DISABLED,
-+				     EDMA_DRIVER_NAME, devp);
-+		if (result) {
-+			printk(KERN_WARNING EDMA_DRIVER_NAME
-+			       ": Cannot request irq %d\n",
-+			       (EDMA_INT_BASE + EDMA_INT_ERR+i));
-+			result = -EBUSY;
-+			goto fail;
-+		}
-+	}
-+
-+	/* request error interrupt */
-+	result = request_irq(EDMA_INT_BASE + EDMA_INT_ERR,
-+			     dma_error_isr, IRQF_DISABLED,
-+			     EDMA_DRIVER_NAME, devp);
-+	if (result) {
-+		printk(KERN_WARNING EDMA_DRIVER_NAME
-+		       ": Cannot request irq %d\n",
-+		       (EDMA_INT_BASE + EDMA_INT_ERR));
-+		result = -EBUSY;
-+		goto fail;
-+	}
-+
-+#ifdef CONFIG_PROC_FS
-+	proc_edma_init();
-+#endif
-+
-+	printk(EDMA_DRIVER_NAME ": initialized successfully\n");
-+	return 0;
-+fail:
-+	coldfire_edma_cleanup();
-+	return result;
-+}
-+
-+/**
-+ * coldfire_edma_exit - eDMA module exit
-+ */
-+static void __exit coldfire_edma_exit(void)
-+{
-+	coldfire_edma_cleanup();
-+}
-+
-+module_init(coldfire_edma_init);
-+module_exit(coldfire_edma_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-+MODULE_DESCRIPTION("eDMA library for Coldfire M5445x");
---- /dev/null
-+++ b/drivers/spi/dspi_mcf.c
-@@ -0,0 +1,1217 @@
-+/*
-+ * dspi_mcf.c - DSPI controller for ColdFire processors
-+ *
-+ *
-+ *      Matt Waddel Matt.Waddel@freescale.com
-+ *      Copyright Freescale Semiconductor, Inc. 2008
-+ *
-+ * 	M547x/M548x changes by Kurt Mahan kmahan@freescale.com
-+ *      Copyright Freescale Semiconductor, Inc. 2008
-+ *
-+ *      Based on spi_coldfire.c done by:
-+ *              Andrey Butok
-+ *              Yaroslav Vinogradov
-+ *              Copyright Freescale Semiconductor, Inc. 2006-2007
-+ *              Mike Lavender (mike@steroidmicros)
-+ *              (C) Copyright 2005, Intec Automation,
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ *   v0.002	M547x/M548x support.
-+ *   v0.001	Initial version. Coldfire DSPI master driver.
-+ ****************************************************************************/
-+
-+/*
-+ * Includes
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/workqueue.h>
-+#include <linux/delay.h>
-+#include <asm/mcfsim.h>
-+#include <asm/mcfqspi.h>
-+#include <asm/coldfire.h>
-+#include <linux/io.h>
-+#include <asm/mcfdspi.h>
-+#include <linux/dma-mapping.h>
-+
-+#undef DSPI_COLDFIRE_DEBUG
-+
-+#ifdef DSPI_COLDFIRE_DEBUG
-+#define DBG(fmt, args...) \
-+	printk(KERN_INFO "[%s]  " fmt , __FUNCTION__, ## args)
-+#else
-+#define DBG(fmt, args...)	do {} while (0)
-+#endif
-+
-+#if defined(CONFIG_M54455)
-+#include <asm/mcf5445x_dspi.h>
-+#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
-+	#include <asm/mcf5445x_edma.h>
-+#endif
-+#endif
-+
-+#if defined(CONFIG_M547X_8X)
-+#include <asm/virtconvert.h>
-+#include <asm/m5485dspi.h>
-+#endif
-+
-+#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
-+#include <asm/mcf_edma.h>
-+#define SPI_DSPI_EDMA
-+#define EDMA_BUFSIZE_KMALLOC	(DSPI_FIFO_SIZE*4)
-+#define DSPI_DMA_RX_TCD		MCF_EDMA_CHAN_DSPI_RX
-+#define DSPI_DMA_TX_TCD 	MCF_EDMA_CHAN_DSPI_TX
-+#endif
-+
-+#define DSPI_BITS	MCF_DSPI_DCTAR_FMSZ(0xF)
-+#define DSPI_BITS_16	MCF_DSPI_DCTAR_FMSZ(0xF)
-+#define DSPI_BITS_8	MCF_DSPI_DCTAR_FMSZ(0x7)
-+#define DSPI_FIFO_SIZE	16
-+
-+#define DRIVER_NAME "Coldfire DSPI"
-+
-+/****************************************************************************/
-+
-+/*
-+ * Local constants and macros
-+ */
-+
-+#define START_STATE ((void *)0)
-+#define RUNNING_STATE ((void *)1)
-+#define DONE_STATE ((void *)2)
-+#define ERROR_STATE ((void *)-1)
-+
-+#define QUEUE_RUNNING 0
-+#define QUEUE_STOPPED 1
-+
-+/****************************************************************************/
-+
-+/*
-+ * Local Data Structures
-+ */
-+
-+struct DSPI_MCR {
-+	unsigned master:1;
-+	unsigned cont_scke:1;
-+	unsigned dconf:2;
-+	unsigned frz:1;
-+	unsigned mtfe:1;
-+	unsigned pcsse:1;
-+	unsigned rooe:1;
-+	unsigned pcsis:8;
-+	unsigned reserved15:1;
-+	unsigned mdis:1;
-+	unsigned dis_tx:1;
-+	unsigned dis_rxf:1;
-+	unsigned clr_tx:1;
-+	unsigned clr_rxf:1;
-+	unsigned smpl_pt:2;
-+	unsigned reserved71:7;
-+	unsigned halt:1;
-+};
-+
-+struct DSPI_CTAR {
-+	unsigned dbr:1;
-+	unsigned fmsz:4;
-+	unsigned cpol:1;
-+	unsigned cpha:1;
-+	unsigned lsbfe:1;
-+	unsigned pcssck:2;
-+	unsigned pasc:2;
-+	unsigned pdt:2;
-+	unsigned pbr:2;
-+	unsigned cssck:4;
-+	unsigned asc:4;
-+	unsigned dt:4;
-+	unsigned br:4;
-+};
-+
-+struct chip_data {
-+	/* dspi data */
-+	union {
-+		u32 mcr_val;
-+		struct DSPI_MCR mcr;
-+	};
-+	union {
-+		u32 ctar_val;
-+		struct DSPI_CTAR ctar;
-+	};
-+	u16 void_write_data;
-+};
-+
-+
-+struct driver_data {
-+	/* Driver model hookup */
-+	struct platform_device *pdev;
-+
-+	/* SPI framework hookup */
-+	struct spi_master *master;
-+
-+	/* Driver message queue */
-+	struct workqueue_struct	*workqueue;
-+	struct work_struct pump_messages;
-+	spinlock_t lock; /* lock */
-+	struct list_head queue;
-+	int busy;
-+	int run;
-+
-+	/* Message Transfer pump */
-+	struct tasklet_struct pump_transfers;
-+
-+	/* Current message transfer state info */
-+	struct spi_message *cur_msg;
-+	struct spi_transfer *cur_transfer;
-+	struct chip_data *cur_chip;
-+	size_t len;
-+	void *tx;
-+	void *tx_end;
-+	void *rx;
-+	void *rx_end;
-+	char flags;
-+#define TRAN_STATE_RX_VOID	   0x01
-+#define TRAN_STATE_TX_VOID 	   0x02
-+#define TRAN_STATE_WORD_ODD_NUM	   0x04
-+	u8 cs;
-+	u16 void_write_data;
-+	unsigned cs_change:1;
-+
-+	u32 trans_cnt;
-+	u32 wce_cnt;
-+	u32 abrt_cnt;
-+	u32 *mcr;		/* DSPI MCR register */
-+	u32 *ctar;		/* DSPI CTAR register */
-+	u32 *dspi_dtfr;		/* DSPI DTFR register */
-+	u32 *dspi_drfr;		/* DSPI DRFR register */
-+	u32 *dspi_rser;		/* DSPI RSER register */
-+	u32 *dspi_sr;		/* DSPI status register */
-+
-+#if defined(SPI_DSPI_EDMA)
-+	void *edma_tx_buf;
-+	void *edma_rx_buf;
-+#endif
-+
-+#if defined(CONFIG_M532x) || defined(CONFIG_M537x)
-+	u16 *par;	   /* Pin assignment register */
-+#else
-+	u8  *par;	   /* Pin assignment register */
-+#endif
-+	u8  *int_icr;	   /* Interrupt level and priority register */
-+	u32 *int_mr;       /* Interrupt mask register */
-+	void (*cs_control)(u8 cs, u8 command);
-+};
-+
-+#define DSPI_CS(cs) ((1<<(cs))<<16)
-+
-+/****************************************************************************/
-+
-+/*
-+ * SPI local functions
-+ */
-+
-+static void *next_transfer(struct driver_data *drv_data)
-+{
-+	struct spi_message *msg = drv_data->cur_msg;
-+	struct spi_transfer *trans = drv_data->cur_transfer;
-+
-+	DBG("\n");
-+	/* Move to next transfer */
-+	if (trans->transfer_list.next != &msg->transfers) {
-+		drv_data->cur_transfer = list_entry(trans->transfer_list.next,
-+						    struct spi_transfer,
-+						    transfer_list);
-+
-+		if (drv_data->cur_transfer->transfer_list.next
-+			== &msg->transfers) /* last transfer */
-+			drv_data->cur_transfer->cs_change = 1;
-+
-+		return RUNNING_STATE;
-+	} else
-+		return DONE_STATE;
-+}
-+
-+
-+static inline int is_word_transfer(struct driver_data *drv_data)
-+{
-+	return ((*(drv_data->ctar+drv_data->cs) & DSPI_BITS_16) ==
-+						  DSPI_BITS_8) ? 0 : 1;
-+}
-+
-+static inline void set_8bit_transfer_mode(struct driver_data *drv_data)
-+{
-+	DBG("\n");
-+	*(drv_data->ctar+drv_data->cs) =
-+		(*(drv_data->ctar + drv_data->cs) & ~DSPI_BITS) | DSPI_BITS_8;
-+}
-+
-+static inline void set_16bit_transfer_mode(struct driver_data *drv_data)
-+{
-+	DBG("\n");
-+	*(drv_data->ctar+drv_data->cs) =
-+		(*(drv_data->ctar + drv_data->cs) & ~DSPI_BITS) | DSPI_BITS_16;
-+}
-+
-+static unsigned char hz_to_spi_baud(int pbr, int dbr, int speed_hz)
-+{
-+	int pbr_tbl[4] = {2, 3, 5, 7}; /* Valid baud rate pre-scaler values */
-+	int brs[16] = {	2,	4,	6,	8,
-+			16,	32,	64,	128,
-+			256,	512,	1024,	2048,
-+			4096,	8192,	16384,	32768 };
-+	int temp, index = 0;
-+
-+	if ((pbr < 0) || (pbr > 3) ||
-+	    (dbr < 0) || (dbr > 1))
-+		return 15; /* table indexes out of range, go slow */
-+
-+	temp = ((((MCF_CLK / 2) / pbr_tbl[pbr]) * (1 + dbr)) / speed_hz);
-+
-+	while (temp >= brs[index])
-+		if (index++ >= 15)
-+			break;
-+
-+	DBG("baud rate scaler = 0x%x - %d\n", index, brs[index]);
-+	return(index);
-+}
-+
-+static int write(struct driver_data *drv_data)
-+{
-+	int tx_count = 0;
-+	int tx_word = is_word_transfer(drv_data);
-+	u16 d16;
-+	u8  d8;
-+	u32 dspi_pushr = 0;
-+	int first = 1;
-+#if defined(SPI_DSPI_EDMA)
-+	u32 *edma_wr = (u32 *)(drv_data->edma_tx_buf);
-+#endif
-+
-+	/* If we are in word mode, but only have a single byte to transfer
-+	 * then switch to byte mode temporarily.  Will switch back at the
-+	 * end of the transfer. */
-+	if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1)) {
-+		drv_data->flags |= TRAN_STATE_WORD_ODD_NUM;
-+		set_8bit_transfer_mode(drv_data);
-+		tx_word = 0;
-+	}
-+
-+	while ((drv_data->tx < drv_data->tx_end) && (tx_count < DSPI_FIFO_SIZE)) {
-+// DBG("while\n");
-+		if (tx_word) {
-+			if ((drv_data->tx_end - drv_data->tx) == 1)
-+				break;
-+
-+			if (!(drv_data->flags & TRAN_STATE_TX_VOID))
-+				d16 = *(u16 *)drv_data->tx;
-+			else
-+				d16 = drv_data->void_write_data;
-+
-+			dspi_pushr = MCF_DSPI_DTFR_TXDATA(d16) |
-+				     DSPI_CS(drv_data->cs) |
-+				     MCF_DSPI_DTFR_CTAS(drv_data->cs) |
-+				     MCF_DSPI_DTFR_CONT;
-+
-+			drv_data->tx += 2;
-+		} else {
-+			if (!(drv_data->flags & TRAN_STATE_TX_VOID))
-+				d8 = *(u8 *)drv_data->tx;
-+			else
-+				d8 = *(u8 *)&drv_data->void_write_data;
-+
-+			dspi_pushr = MCF_DSPI_DTFR_TXDATA(d8) |
-+				     DSPI_CS(drv_data->cs) |
-+				     MCF_DSPI_DTFR_CTAS(drv_data->cs) |
-+				     MCF_DSPI_DTFR_CONT;
-+
-+			drv_data->tx++;
-+		}
-+
-+		if (drv_data->tx == drv_data->tx_end
-+			|| tx_count == DSPI_FIFO_SIZE-1) {
-+			/* last transfer in the queue */
-+			dspi_pushr |= MCF_DSPI_DTFR_EOQ;
-+			if ((drv_data->cs_change)
-+			 && (drv_data->tx == drv_data->tx_end))
-+				dspi_pushr &= ~MCF_DSPI_DTFR_CONT;
-+#ifdef CONFIG_M547X_8X
-+			/* EOQ gets missed if we don't delay */
-+			udelay(100);
-+#endif
-+		} else if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1))
-+			dspi_pushr |= MCF_DSPI_DTFR_EOQ;
-+
-+		if (first) {
-+			first = 0;
-+			dspi_pushr |= MCF_DSPI_DTFR_CTCNT; /* clear counter */
-+		}
-+#if defined(SPI_DSPI_EDMA)
-+		*edma_wr = dspi_pushr;
-+		edma_wr++;
-+#else
-+		*drv_data->dspi_dtfr = dspi_pushr;
-+#endif
-+		tx_count++;
-+	}
-+
-+#if defined(SPI_DSPI_EDMA)
-+	if (tx_count > 0) {
-+
-+		mcf_edma_set_tcd_params(DSPI_DMA_TX_TCD,
-+			virt_to_phys(drv_data->edma_tx_buf),
-+			(u32)drv_data->dspi_dtfr,
-+			MCF_EDMA_TCD_ATTR_SSIZE_32BIT
-+			| MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
-+			4,		/* soff */
-+			4 * tx_count,	/* nbytes */
-+			0,		/* slast */
-+			1,		/* citer */
-+			1,		/* biter */
-+			0,		/* doff */
-+			0,		/* dlastsga */
-+			0,		/* major_int */
-+			1);		/* disable_req */
-+
-+		mcf_edma_set_tcd_params(DSPI_DMA_RX_TCD,
-+			(u32)drv_data->dspi_drfr,
-+			virt_to_phys(drv_data->edma_rx_buf),
-+			MCF_EDMA_TCD_ATTR_SSIZE_32BIT
-+			| MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
-+			0,		/* soff */
-+			4 * tx_count,	/* nbytes */
-+			0,		/* slast */
-+			1,		/* citer */
-+			1,		/* biter */
-+			4,		/* doff */
-+			0,		/* dlastsga */
-+			0,		/* major_int */
-+			1);		/* disable_req */
-+
-+		mcf_edma_start_transfer(DSPI_DMA_TX_TCD);
-+	}
-+#endif
-+	return (tx_count * (tx_word + 1));
-+}
-+
-+static int read(struct driver_data *drv_data)
-+{
-+	int rx_count = 0;
-+	int rx_word = is_word_transfer(drv_data);
-+	u16 d;
-+#if defined(SPI_DSPI_EDMA)
-+	u32 *rx_edma = (u32 *) drv_data->edma_rx_buf;
-+
-+	/* receive SPI data */
-+	mcf_edma_start_transfer(DSPI_DMA_RX_TCD);
-+#endif
-+	while ((drv_data->rx < drv_data->rx_end)
-+		&& (rx_count < DSPI_FIFO_SIZE)) {
-+
-+		if (rx_word) {
-+			if ((drv_data->rx_end - drv_data->rx) == 1)
-+				break;
-+#if defined(SPI_DSPI_EDMA)
-+			d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
-+			rx_edma++;
-+#else
-+			d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr);
-+#endif
-+			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
-+				*(u16 *)drv_data->rx = d;
-+			drv_data->rx += 2;
-+
-+		} else {
-+#if defined(SPI_DSPI_EDMA)
-+			d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
-+			rx_edma++;
-+#else
-+			d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr);
-+#endif
-+			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
-+				*(u8 *)drv_data->rx = d;
-+			drv_data->rx++;
-+		}
-+		rx_count++;
-+		DBG("rxd=0x%x\n", d);
-+	}
-+	return rx_count;
-+}
-+
-+
-+static inline void dspi_setup_chip(struct driver_data *drv_data)
-+{
-+	struct chip_data *chip = drv_data->cur_chip;
-+
-+	DBG("\n");
-+	*drv_data->mcr = chip->mcr_val;
-+	*(drv_data->ctar+drv_data->cs) = chip->ctar_val;
-+	*drv_data->dspi_rser =  MCF_DSPI_DRSER_EOQFE;
-+}
-+
-+#if defined(SPI_DSPI_EDMA)
-+static int edma_tx_handler(int channel, void *dev)
-+{
-+	DBG("\n");
-+	if (channel == DSPI_DMA_TX_TCD)
-+		mcf_edma_stop_transfer(DSPI_DMA_TX_TCD);
-+	return IRQ_HANDLED;
-+}
-+
-+static int edma_rx_handler(int channel, void *dev)
-+{
-+	DBG("\n");
-+	if (channel == DSPI_DMA_RX_TCD)
-+		mcf_edma_stop_transfer(DSPI_DMA_RX_TCD);
-+	return IRQ_HANDLED;
-+}
-+#endif
-+
-+static irqreturn_t dspi_interrupt(int irq, void *dev_id)
-+{
-+	struct driver_data *drv_data = (struct driver_data *)dev_id;
-+	struct spi_message *msg = drv_data->cur_msg;
-+
-+	/* Clear all flags immediately */
-+	*drv_data->dspi_sr = MCF_DSPI_DSR_EOQF;
-+
-+	if (!drv_data->cur_msg || !drv_data->cur_msg->state) {
-+#if !defined(SPI_DSPI_EDMA)
-+		u32 irq_status = *drv_data->dspi_sr;
-+		/* if eDMA is used it happens some time (at least once)*/
-+		printk(KERN_ERR "Bad message or transfer state handler. \
-+				 IRQ status = %x\n", irq_status);
-+#endif
-+		return IRQ_NONE;
-+	}
-+
-+	DBG("\n");
-+	/*
-+	 * Read the data into the buffer and reload and start
-+	 * queue with new data if not finished.  If finished
-+	 * then setup the next transfer
-+	 */
-+	read(drv_data);
-+
-+	if (drv_data->rx == drv_data->rx_end) {
-+		/*
-+		 * Finished now - fall through and schedule next
-+		 * transfer tasklet
-+		 */
-+		if (drv_data->flags & TRAN_STATE_WORD_ODD_NUM)
-+			set_16bit_transfer_mode(drv_data);
-+
-+		msg->state = next_transfer(drv_data);
-+	} else {
-+		/* not finished yet - keep going */
-+		msg->actual_length += write(drv_data);
-+		return IRQ_HANDLED;
-+	}
-+
-+	tasklet_schedule(&drv_data->pump_transfers);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/* caller already set message->status; dma and pio irqs are blocked */
-+static void giveback(struct driver_data *drv_data)
-+{
-+	struct spi_transfer *last_transfer;
-+	unsigned long flags;
-+	struct spi_message *msg;
-+	DBG("\n");
-+
-+	spin_lock_irqsave(&drv_data->lock, flags);
-+	msg = drv_data->cur_msg;
-+	drv_data->cur_msg = NULL;
-+	drv_data->cur_transfer = NULL;
-+	drv_data->cur_chip = NULL;
-+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
-+	spin_unlock_irqrestore(&drv_data->lock, flags);
-+
-+	last_transfer = list_entry(msg->transfers.prev,
-+				   struct spi_transfer,	transfer_list);
-+
-+	if (!last_transfer->cs_change)
-+		drv_data->cs_control(drv_data->cs, QSPI_CS_DROP);
-+
-+	msg->state = NULL;
-+	if (msg->complete)
-+		msg->complete(msg->context);
-+}
-+
-+
-+static void pump_transfers(unsigned long data)
-+{
-+	struct driver_data *drv_data = (struct driver_data *)data;
-+	struct spi_message *message = NULL;
-+	struct spi_transfer *transfer = NULL;
-+	struct spi_transfer *previous = NULL;
-+	struct chip_data *chip = NULL;
-+	unsigned long flags;
-+	DBG("\n");
-+	/* Get current state information */
-+	message = drv_data->cur_msg;
-+	transfer = drv_data->cur_transfer;
-+	chip = drv_data->cur_chip;
-+
-+	/* Handle for abort */
-+	if (message->state == ERROR_STATE) {
-+		message->status = -EIO;
-+		giveback(drv_data);
-+		return;
-+	}
-+
-+	/* Handle end of message */
-+	if (message->state == DONE_STATE) {
-+		message->status = 0;
-+		giveback(drv_data);
-+		return;
-+	}
-+
-+	if (message->state == START_STATE) {
-+		dspi_setup_chip(drv_data);
-+
-+		if (drv_data->cs_control)
-+			drv_data->cs_control(message->spi->chip_select,
-+				QSPI_CS_ASSERT);
-+	}
-+
-+	/* Delay if requested at end of transfer*/
-+	if (message->state == RUNNING_STATE) {
-+		previous = list_entry(transfer->transfer_list.prev,
-+					struct spi_transfer,
-+					transfer_list);
-+
-+		if (drv_data->cs_control && transfer->cs_change)
-+			drv_data->cs_control(message->spi->chip_select,
-+				QSPI_CS_DROP);
-+
-+		if (previous->delay_usecs)
-+			udelay(previous->delay_usecs);
-+
-+		if (drv_data->cs_control && transfer->cs_change)
-+			drv_data->cs_control(message->spi->chip_select,
-+				QSPI_CS_ASSERT);
-+	}
-+
-+	drv_data->flags = 0;
-+	drv_data->tx = (void *)transfer->tx_buf;
-+	drv_data->tx_end = drv_data->tx + transfer->len;
-+	drv_data->rx = transfer->rx_buf;
-+	drv_data->rx_end = drv_data->rx + transfer->len;
-+
-+	if (!drv_data->rx)
-+		drv_data->flags |= TRAN_STATE_RX_VOID;
-+	if (!drv_data->tx)
-+		drv_data->flags |= TRAN_STATE_TX_VOID;
-+	drv_data->cs = message->spi->chip_select;
-+	drv_data->cs_change = transfer->cs_change;
-+	drv_data->void_write_data = chip->void_write_data;
-+	if (transfer->speed_hz) {
-+		*(drv_data->ctar + drv_data->cs) = \
-+			((chip->ctar_val & ~0xF) | \
-+			  hz_to_spi_baud(chip->ctar.pbr, \
-+					 chip->ctar.dbr, \
-+					 transfer->speed_hz));
-+	}
-+
-+	message->state = RUNNING_STATE;
-+	/* Go baby, go */
-+	local_irq_save(flags);
-+	message->actual_length += write(drv_data);
-+	local_irq_restore(flags);
-+}
-+
-+
-+static void pump_messages(struct work_struct *work)
-+{
-+	struct driver_data *drv_data;
-+	unsigned long flags;
-+	DBG("\n");
-+
-+	drv_data = container_of(work, struct driver_data, pump_messages);
-+
-+	/* Lock queue and check for queue work */
-+	spin_lock_irqsave(&drv_data->lock, flags);
-+	if (list_empty(&drv_data->queue)
-+		|| drv_data->run == QUEUE_STOPPED) {
-+		drv_data->busy = 0;
-+		spin_unlock_irqrestore(&drv_data->lock, flags);
-+		return;
-+	}
-+
-+	/* Make sure we are not already running a message */
-+	if (drv_data->cur_msg) {
-+		spin_unlock_irqrestore(&drv_data->lock, flags);
-+		return;
-+	}
-+
-+	/* Extract head of queue */
-+	drv_data->cur_msg = list_entry(drv_data->queue.next,
-+					struct spi_message, queue);
-+	list_del_init(&drv_data->cur_msg->queue);
-+
-+	/* Initial message state*/
-+	drv_data->cur_msg->state = START_STATE;
-+	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
-+						struct spi_transfer,
-+						transfer_list);
-+
-+	if (drv_data->cur_transfer->transfer_list.next
-+		== &drv_data->cur_msg->transfers)
-+		drv_data->cur_transfer->cs_change = 1; /* last */
-+
-+
-+	/* Setup the SPI Registers using the per chip configuration */
-+	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
-+
-+	/* Mark as busy and launch transfers */
-+	tasklet_schedule(&drv_data->pump_transfers);
-+
-+	drv_data->busy = 1;
-+	spin_unlock_irqrestore(&drv_data->lock, flags);
-+}
-+
-+/****************************************************************************/
-+
-+/*
-+ * SPI master implementation
-+ */
-+
-+static int transfer(struct spi_device *spi, struct spi_message *msg)
-+{
-+	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
-+	unsigned long flags;
-+
-+	DBG("\n");
-+	spin_lock_irqsave(&drv_data->lock, flags);
-+
-+	if (drv_data->run == QUEUE_STOPPED) {
-+		spin_unlock_irqrestore(&drv_data->lock, flags);
-+		return -ESHUTDOWN;
-+	}
-+
-+	msg->actual_length = 0;
-+	msg->status = -EINPROGRESS;
-+	msg->state = START_STATE;
-+
-+	list_add_tail(&msg->queue, &drv_data->queue);
-+
-+	if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
-+		queue_work(drv_data->workqueue, &drv_data->pump_messages);
-+
-+	spin_unlock_irqrestore(&drv_data->lock, flags);
-+
-+	return 0;
-+}
-+
-+
-+static int setup(struct spi_device *spi)
-+{
-+
-+	struct chip_data *chip;
-+	struct coldfire_dspi_chip *chip_info
-+		= (struct coldfire_dspi_chip *)spi->controller_data;
-+	DBG("\n");
-+
-+	/* Only alloc on first setup */
-+	chip = spi_get_ctldata(spi);
-+	if (chip == NULL) {
-+		chip = kcalloc(1, sizeof(struct chip_data), GFP_KERNEL);
-+		if (!chip)
-+			return -ENOMEM;
-+		spi->mode = chip_info->mode;
-+		spi->bits_per_word = chip_info->bits_per_word;
-+	}
-+
-+	chip->mcr.master = 1;
-+	chip->mcr.cont_scke = 0;
-+	chip->mcr.dconf = 0;
-+	chip->mcr.frz = 0;
-+	chip->mcr.mtfe = 0;
-+	chip->mcr.pcsse = 0;
-+	chip->mcr.rooe = 0;
-+	chip->mcr.pcsis = 0xFF;
-+	chip->mcr.reserved15 = 0;
-+	chip->mcr.mdis = 0;
-+	chip->mcr.dis_tx = 0;
-+	chip->mcr.dis_rxf = 0;
-+	chip->mcr.clr_tx = 1;
-+	chip->mcr.clr_rxf = 1;
-+	chip->mcr.smpl_pt = 0;
-+	chip->mcr.reserved71 = 0;
-+	chip->mcr.halt = 0;
-+
-+	if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) {
-+		chip->ctar.fmsz = spi->bits_per_word-1;
-+	} else {
-+		printk(KERN_ERR "Invalid wordsize\n");
-+		kfree(chip);
-+		return -ENODEV;
-+	}
-+
-+	chip->void_write_data = chip_info->void_write_data;
-+
-+	if (spi->max_speed_hz != 0)
-+		chip_info->br = hz_to_spi_baud(chip_info->pbr, chip_info->dbr, \
-+					       spi->max_speed_hz);
-+
-+	chip->ctar.cpha = (spi->mode & SPI_CPHA) ? 1 : 0;
-+	chip->ctar.cpol = (spi->mode & SPI_CPOL) ? 1 : 0;
-+	chip->ctar.lsbfe = (spi->mode & SPI_LSB_FIRST) ? 1 : 0;
-+	chip->ctar.dbr = chip_info->dbr;
-+	chip->ctar.pbr = chip_info->pbr;
-+	chip->ctar.br = chip_info->br;
-+	chip->ctar.pcssck = chip_info->pcssck;
-+	chip->ctar.pasc = chip_info->pasc;
-+	chip->ctar.pdt = chip_info->pdt;
-+	chip->ctar.cssck = chip_info->cssck;
-+	chip->ctar.asc = chip_info->asc;
-+	chip->ctar.dt = chip_info->dt;
-+
-+	spi_set_ctldata(spi, chip);
-+
-+	return 0;
-+}
-+
-+static int init_queue(struct driver_data *drv_data)
-+{
-+	INIT_LIST_HEAD(&drv_data->queue);
-+	spin_lock_init(&drv_data->lock);
-+
-+	drv_data->run = QUEUE_STOPPED;
-+	drv_data->busy = 0;
-+
-+	tasklet_init(&drv_data->pump_transfers,
-+			pump_transfers,	(unsigned long)drv_data);
-+
-+	INIT_WORK(&drv_data->pump_messages, pump_messages);
-+
-+	drv_data->workqueue = create_singlethread_workqueue(
-+					drv_data->master->dev.parent->bus_id);
-+	if (drv_data->workqueue == NULL)
-+		return -EBUSY;
-+
-+	return 0;
-+}
-+
-+static int start_queue(struct driver_data *drv_data)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&drv_data->lock, flags);
-+
-+	if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
-+		spin_unlock_irqrestore(&drv_data->lock, flags);
-+		return -EBUSY;
-+	}
-+
-+	drv_data->run = QUEUE_RUNNING;
-+	drv_data->cur_msg = NULL;
-+	drv_data->cur_transfer = NULL;
-+	drv_data->cur_chip = NULL;
-+	spin_unlock_irqrestore(&drv_data->lock, flags);
-+
-+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
-+
-+	return 0;
-+}
-+
-+static int stop_queue(struct driver_data *drv_data)
-+{
-+	unsigned long flags;
-+	unsigned limit = 500;
-+	int status = 0;
-+
-+	spin_lock_irqsave(&drv_data->lock, flags);
-+
-+	/* This is a bit lame, but is optimized for the common execution path.
-+	 * A wait_queue on the drv_data->busy could be used, but then the common
-+	 * execution path (pump_messages) would be required to call wake_up or
-+	 * friends on every SPI message. Do this instead */
-+	drv_data->run = QUEUE_STOPPED;
-+	while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
-+		spin_unlock_irqrestore(&drv_data->lock, flags);
-+		msleep(10);
-+		spin_lock_irqsave(&drv_data->lock, flags);
-+	}
-+
-+	if (!list_empty(&drv_data->queue) || drv_data->busy)
-+		status = -EBUSY;
-+
-+	spin_unlock_irqrestore(&drv_data->lock, flags);
-+
-+	return status;
-+}
-+
-+static int destroy_queue(struct driver_data *drv_data)
-+{
-+	int status;
-+
-+	status = stop_queue(drv_data);
-+	if (status != 0)
-+		return status;
-+
-+	destroy_workqueue(drv_data->workqueue);
-+
-+	return 0;
-+}
-+
-+
-+static void cleanup(struct spi_device *spi)
-+{
-+	struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
-+
-+	dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n",
-+		spi->master->bus_num, spi->chip_select);
-+
-+	kfree(chip);
-+}
-+
-+
-+/****************************************************************************/
-+
-+/*
-+ * Generic Device driver routines and interface implementation
-+ */
-+
-+static int coldfire_spi_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct coldfire_spi_master *platform_info;
-+	struct spi_master *master;
-+	struct driver_data *drv_data = 0;
-+	struct resource *memory_resource;
-+	int irq;
-+	int status = 0;
-+	int i;
-+#if defined(SPI_DSPI_EDMA)
-+	dma_addr_t dma_handle;
-+#endif
-+
-+	platform_info = (struct coldfire_spi_master *)dev->platform_data;
-+
-+	master = spi_alloc_master(dev, sizeof(struct driver_data));
-+	if (!master)
-+		return -ENOMEM;
-+
-+ 	drv_data = spi_master_get_devdata(master);
-+ 	drv_data->master = master;
-+
-+	INIT_LIST_HEAD(&drv_data->queue);
-+	spin_lock_init(&drv_data->lock);
-+
-+	master->bus_num = platform_info->bus_num;
-+	master->num_chipselect = platform_info->num_chipselect;
-+	master->cleanup = cleanup;
-+	master->setup = setup;
-+	master->transfer = transfer;
-+
-+	drv_data->cs_control = platform_info->cs_control;
-+	if (drv_data->cs_control)
-+		for (i = 0; i < master->num_chipselect; i++)
-+			drv_data->cs_control(i, QSPI_CS_INIT | QSPI_CS_DROP);
-+
-+	/* Setup register addresses */
-+	memory_resource = platform_get_resource_byname(pdev,
-+				IORESOURCE_MEM, "spi-module");
-+	if (!memory_resource) {
-+		dev_dbg(dev, "can not find platform module memory\n");
-+		goto out_error_master_alloc;
-+	}
-+
-+#if defined(SPI_DSPI_EDMA)
-+	drv_data->edma_tx_buf = dma_alloc_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \
-+						   &dma_handle, GFP_DMA);
-+	if (!drv_data->edma_tx_buf) {
-+		dev_dbg(dev, "cannot allocate eDMA TX memory\n");
-+		goto out_error_master_alloc;
-+	}
-+	drv_data->edma_rx_buf = dma_alloc_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \
-+						   &dma_handle, GFP_DMA);
-+	if (!drv_data->edma_rx_buf) {
-+		dma_free_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \
-+				  drv_data->edma_tx_buf, dma_handle);
-+		kfree(drv_data->edma_tx_buf);
-+		dev_dbg(dev, "cannot allocate eDMA RX memory\n");
-+		goto out_error_master_alloc;
-+	}
-+#endif
-+
-+	drv_data->mcr = (void *)&MCF_DSPI_DMCR;
-+	drv_data->ctar = (void *)&MCF_DSPI_DCTAR0;
-+	drv_data->dspi_sr = (void *)&MCF_DSPI_DSR;
-+	drv_data->dspi_rser = (void *)&MCF_DSPI_DRSER;
-+	drv_data->dspi_dtfr = (void *)&MCF_DSPI_DTFR;
-+	drv_data->dspi_drfr = (void *)&MCF_DSPI_DRFR;
-+
-+	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+						       "spi-par");
-+	if (!memory_resource) {
-+		dev_dbg(dev, "No spi-par memory\n");
-+		goto out_error_master_alloc;
-+	}
-+	drv_data->par = (void *)memory_resource->start;
-+
-+	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+						       "spi-int-level");
-+	if (!memory_resource) {
-+		dev_dbg(dev, "No spi-int-level memory\n");
-+		goto out_error_master_alloc;
-+	}
-+	drv_data->int_icr = (void *)memory_resource->start;
-+
-+	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+						       "spi-int-mask");
-+	if (!memory_resource) {
-+		dev_dbg(dev, "No spi-int-mask memory\n");
-+		goto out_error_master_alloc;
-+	}
-+	drv_data->int_mr = (void *)memory_resource->start;
-+
-+	if (platform_info->irq_list) {
-+		/* multiple IRQs */
-+		int *irqlist = platform_info->irq_list;
-+		while ((irq = *irqlist++)) {
-+			int off = *irqlist++;
-+			int lvl = *irqlist++;
-+			int msk = *irqlist++;
-+			status = request_irq(irq, dspi_interrupt, IRQF_DISABLED,
-+					     dev->bus_id, drv_data);
-+			if (status < 0) {
-+				dev_err(&pdev->dev, 
-+					"Unable to attach ColdFire DSPI interrupt\n");
-+				goto out_error_master_alloc;
-+			}
-+
-+			if (lvl)
-+				*(drv_data->int_icr + off) = lvl;
-+
-+			if (msk)
-+				*drv_data->int_mr &= ~msk;
-+		}
-+	}
-+	else {
-+		irq = platform_info->irq_vector;
-+
-+		status = request_irq(platform_info->irq_vector, dspi_interrupt,
-+				     IRQF_DISABLED, dev->bus_id, drv_data);
-+		if (status < 0) {
-+			dev_err(&pdev->dev, "Unable to attach ColdFire DSPI interrupt\n");
-+			goto out_error_master_alloc;
-+		}
-+
-+		*drv_data->int_icr = platform_info->irq_lp;
-+		*drv_data->int_mr &= ~platform_info->irq_mask;
-+	}
-+
-+	/* Now that we have all the addresses etc.  Let's set it up */
-+	if (platform_info->par_val)
-+		*drv_data->par = platform_info->par_val;
-+
-+	/* Initial and start queue */
-+	status = init_queue(drv_data);
-+	if (status != 0) {
-+		dev_err(&pdev->dev, "Problem initializing DSPI queue\n");
-+		goto out_error_irq_alloc;
-+	}
-+	status = start_queue(drv_data);
-+	if (status != 0) {
-+		dev_err(&pdev->dev, "Problem starting DSPI queue\n");
-+		goto out_error_irq_alloc;
-+	}
-+
-+	/* Register with the SPI framework */
-+	platform_set_drvdata(pdev, drv_data);
-+	status = spi_register_master(master);
-+	if (status != 0) {
-+		dev_err(&pdev->dev, "Problem registering DSPI master\n");
-+		status = -EINVAL;
-+		goto out_error_queue_alloc;
-+	}
-+
-+#if defined(SPI_DSPI_EDMA)
-+	if (mcf_edma_request_channel(DSPI_DMA_TX_TCD,
-+				     edma_tx_handler,
-+				     NULL,
-+				     0x0,
-+				     pdev,
-+				     NULL, /* spinlock */
-+				     DRIVER_NAME) < 0){
-+		dev_err(&pdev->dev, "eDMA transmit channel request\n");
-+		status = -EINVAL;
-+		goto out_error_queue_alloc;
-+	}
-+
-+	if (mcf_edma_request_channel(DSPI_DMA_RX_TCD,
-+				     edma_rx_handler,
-+				     NULL,
-+				     0x0,
-+				     pdev,
-+				     NULL, /* spinlock */
-+				     DRIVER_NAME) < 0){
-+		dev_err(&pdev->dev, "eDAM receive channel request\n");
-+		status = -EINVAL;
-+		mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev);
-+		goto out_error_queue_alloc;
-+	}
-+#endif
-+
-+	printk(KERN_INFO "DSPI: Coldfire master initialized\n");
-+	return status;
-+
-+out_error_queue_alloc:
-+	destroy_queue(drv_data);
-+
-+out_error_irq_alloc:
-+	free_irq(platform_info->irq_vector, drv_data);
-+
-+out_error_master_alloc:
-+	spi_master_put(master);
-+	return status;
-+
-+}
-+
-+static int coldfire_spi_remove(struct platform_device *pdev)
-+{
-+	struct driver_data *drv_data = platform_get_drvdata(pdev);
-+	int irq;
-+	int status = 0;
-+
-+	if (!drv_data)
-+		return 0;
-+
-+#if defined(SPI_DSPI_EDMA)
-+	mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev);
-+	mcf_edma_free_channel(DSPI_DMA_RX_TCD, pdev);
-+#endif
-+
-+	/* Remove the queue */
-+	status = destroy_queue(drv_data);
-+	if (status != 0)
-+		return status;
-+
-+	/* Release IRQ */
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq >= 0)
-+		free_irq(irq, drv_data);
-+
-+	/* Disconnect from the SPI framework */
-+	spi_unregister_master(drv_data->master);
-+
-+	/* Prevent double remove */
-+	platform_set_drvdata(pdev, NULL);
-+
-+	return 0;
-+}
-+
-+static void coldfire_spi_shutdown(struct platform_device *pdev)
-+{
-+	int status = coldfire_spi_remove(pdev);
-+
-+	if (status != 0)
-+		dev_err(&pdev->dev, "shutdown failed with %d\n", status);
-+}
-+
-+
-+#ifdef CONFIG_PM
-+static int suspend_devices(struct device *dev, void *pm_message)
-+{
-+	pm_message_t *state = pm_message;
-+
-+	if (dev->power.power_state.event != state->event) {
-+		dev_warn(dev, "pm state does not match request\n");
-+		return -1;
-+	}
-+
-+	return 0;
-+}
-+
-+static int coldfire_spi_suspend(struct platform_device *pdev,
-+				pm_message_t state)
-+{
-+	struct driver_data *drv_data = platform_get_drvdata(pdev);
-+	int status = 0;
-+
-+	/* Check all childern for current power state */
-+	if (device_for_each_child(&pdev->dev,
-+		&state, suspend_devices) != 0) {
-+		dev_warn(&pdev->dev, "suspend aborted\n");
-+		return -1;
-+	}
-+
-+	status = stop_queue(drv_data);
-+	if (status != 0)
-+		return status;
-+
-+	return 0;
-+}
-+
-+static int coldfire_spi_resume(struct platform_device *pdev)
-+{
-+	struct driver_data *drv_data = platform_get_drvdata(pdev);
-+	int status = 0;
-+
-+	/* Start the queue running */
-+	status = start_queue(drv_data);
-+	if (status != 0) {
-+		dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
-+		return status;
-+	}
-+
-+	return 0;
-+}
-+#else
-+#define coldfire_spi_suspend NULL
-+#define coldfire_spi_resume NULL
-+#endif /* CONFIG_PM */
-+
-+static struct platform_driver driver = {
-+	.driver = {
-+		.name = "spi_coldfire",
-+		.bus = &platform_bus_type,
-+		.owner = THIS_MODULE,
-+	},
-+	.probe = coldfire_spi_probe,
-+	.remove = __devexit_p(coldfire_spi_remove),
-+	.shutdown = coldfire_spi_shutdown,
-+	.suspend = coldfire_spi_suspend,
-+	.resume = coldfire_spi_resume,
-+};
-+
-+static int __init coldfire_spi_init(void)
-+{
-+	platform_driver_register(&driver);
-+
-+	return 0;
-+}
-+module_init(coldfire_spi_init);
-+
-+static void __exit coldfire_spi_exit(void)
-+{
-+	platform_driver_unregister(&driver);
-+}
-+module_exit(coldfire_spi_exit);
-+
-+MODULE_AUTHOR("Matt Waddel");
-+MODULE_DESCRIPTION("ColdFire DSPI Contoller");
-+MODULE_LICENSE("GPL");
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -35,6 +35,15 @@ config SPI_DEBUG
- 	  Say "yes" to enable debug messaging (like dev_dbg and pr_debug),
- 	  sysfs, and debugfs support in SPI controller and protocol drivers.
- 
-+config COLDFIRE_EDMA
-+	tristate "Coldfire eDMA"
-+	depends on COLDFIRE && EXPERIMENTAL
-+	help
-+	    Support for Coldfire eDMA controller. Required for example
-+	    by SSI audio device driver.
-+
-+
-+
- #
- # MASTER side ... talking to discrete SPI slave chips including microcontrollers
- #
-@@ -113,6 +122,27 @@ config SPI_GPIO
- 
- 	  If unsure, say N.
- 
-+config SPI_COLDFIRE
-+	tristate "Coldfire QSPI/DSPI SPI Master"
-+	depends on SPI_MASTER && COLDFIRE && EXPERIMENTAL
-+	help
-+	  SPI driver for Freescale Coldfire QSPI module in master mode.
-+	  Tested with the 5282 processor, but should also work with other
-+	  Coldfire variants.
-+
-+config SPI_DSPI
-+	tristate "Coldfire DSPI"
-+	depends on SPI_MASTER && COLDFIRE
-+	help
-+	  SPI driver for Coldfire DSPI driver only.
-+
-+config SPI_COLDFIRE_DSPI_EDMA	  
-+	boolean "Coldfire DSPI master driver uses eDMA"
-+	depends on SPI_MASTER && COLDFIRE && SPI_COLDFIRE && EXPERIMENTAL && COLDFIRE_EDMA
-+	default n
-+	help
-+	  Say "yes" if you want DSPI master driver to use eDMA for transfers.
-+
- config SPI_IMX
- 	tristate "Freescale iMX SPI controller"
- 	depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
-@@ -255,6 +285,18 @@ config SPI_TLE62X0
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
-+config SPI_COLDFIRE_SSI_AUDIO
-+	tristate "Coldfire SSI AUDIO"
-+	depends on SPI_MASTER && SPI_COLDFIRE && EXPERIMENTAL
-+	help
-+	  SSI audio device driver
-+
-+config SSIAUDIO_USE_EDMA
-+	boolean "Coldfire DSPI master driver uses eDMA"
-+	default y
-+	depends on EXPERIMENTAL && COLDFIRE_EDMA && SPI_COLDFIRE_SSI_AUDIO
-+	help
-+	  Say "yes" if you want SSI audio driver to use eDMA for SSI transfers.
- 
- # (slave support would go here)
- 
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -6,6 +6,8 @@ ifeq ($(CONFIG_SPI_DEBUG),y)
- EXTRA_CFLAGS += -DDEBUG
- endif
- 
-+obj-$(CONFIG_COLDFIRE_EDMA)		+= coldfire_edma.o
-+
- # small core, mostly translating board-specific
- # config declarations into driver model code
- obj-$(CONFIG_SPI_MASTER)		+= spi.o
-@@ -16,6 +18,8 @@ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.
- obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
- obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
- obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
-+# obj-$(CONFIG_SPI_COLDFIRE)		+= spi_coldfire.o spi-m5445x.o
-+obj-$(CONFIG_SPI_DSPI)			+= dspi_mcf.o
- obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
- obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
- obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
-@@ -35,6 +39,7 @@ obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.
- obj-$(CONFIG_SPI_AT25)		+= at25.o
- obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
- obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
-+obj-$(CONFIG_SPI_COLDFIRE_SSI_AUDIO)	+= ssi_audio.o
- # 	... add above this line ...
- 
- # SPI slave controller drivers (upstream link)
---- /dev/null
-+++ b/drivers/spi/spi_coldfire.c
-@@ -0,0 +1,1542 @@
-+/*
-+ * spi_coldfire.c - Master QSPI/DSPI controller for the ColdFire processors
-+ *
-+ *
-+ *	(C) Copyright 2005, Intec Automation,
-+ *			    Mike Lavender (mike@steroidmicros)
-+ *
-+ *	(C) Copyright 2007-2008, Freescale Inc,
-+ *			Yaroslav Vinogradov
-+ *			Andrey Butok
-+ *			Kurt Mahan
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ *   v0.003	12 February 2008	Andrey Butok, Freescale Semiconductor
-+ *   		Added suport of MCF5227x DSPI module.
-+ *   v0.002	2007	Yaroslav Vinogradov, Freescale Semiconductor
-+ *   		Added suport of MCF5445x DSPI module.
-+ *   v0.001	2005		Mike Lavender, Intec Automation,
-+ *   		Intial version. Coldfire QSPI master driver.
-+ *
-+ */
-+
-+
-+/****************************************************************************/
-+
-+/*
-+ * Includes
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/workqueue.h>
-+#include <linux/delay.h>
-+
-+#include <asm/delay.h>
-+#include <asm/mcfsim.h>
-+#include <asm/mcfqspi.h>
-+#include <asm/coldfire.h>
-+
-+#if defined(CONFIG_M5445X)
-+	#include <asm/virtconvert.h>
-+
-+	#define SPI_DSPI
-+	#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
-+		#define SPI_DSPI_EDMA
-+		#ifdef CONFIG_MMU
-+			#define SPI_USE_MMU
-+		#endif
-+		#include <asm/mcf5445x_edma.h>
-+	#endif
-+
-+	#include <asm/mcf5445x_dspi.h>
-+#endif
-+
-+#if defined(CONFIG_M547X_8X)
-+	#define SPI_DSPI
-+
-+	#include <asm/virtconvert.h>
-+	#include <asm/m5485dspi.h>
-+#endif
-+
-+#ifdef CONFIG_M5227x
-+	#define SPI_DSPI
-+
-+	#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
-+		#define SPI_DSPI_EDMA
-+	#endif
-+#endif
-+
-+
-+#if defined(SPI_DSPI_EDMA)
-+
-+/* edma buffer size in transfer units (32bits) */
-+#define EDMA_BUFFER_SIZE	(PAGE_SIZE/4)
-+#define EDMA_BUFSIZE_KMALLOC	(EDMA_BUFFER_SIZE*4)
-+
-+#define DSPI_DMA_RX_TCD		MCF_EDMA_CHAN_DSPI_RX
-+#define DSPI_DMA_TX_TCD 	MCF_EDMA_CHAN_DSPI_TX
-+
-+#include <asm/mcf_edma.h>
-+#endif
-+
-+MODULE_AUTHOR("Mike Lavender");
-+MODULE_DESCRIPTION("ColdFire SPI Contoller");
-+MODULE_LICENSE("GPL");
-+
-+#define DRIVER_NAME "Coldfire QSPI/DSPI"
-+
-+/****************************************************************************/
-+
-+/*
-+ * Local constants and macros
-+ */
-+
-+#define QSPI_RAM_SIZE		0x10    /* 16 word table */
-+#define QSPI_TRANSMIT_RAM 	0x00
-+#define QSPI_RECEIVE_RAM  	0x10
-+#define QSPI_COMMAND_RAM  	0x20
-+
-+#define QSPI_COMMAND		0x7000  /* 15:   X = Continuous CS
-+					 * 14:   1 = Get BITSE from QMR[BITS]
-+					 * 13:   1 = Get DT    from QDLYR[DTL]
-+					 * 12:   1 = Get DSK   from QDLYR[QCD]
-+					 * 8-11: XXXX = next 4 bytes for CS
-+					 * 0-7:  0000 0000 Reserved
-+					 */
-+
-+#define QIR_WCEF                0x0008  /* write collison */
-+#define QIR_ABRT                0x0004  /* abort */
-+#define QIR_SPIF                0x0001  /* finished */
-+
-+#define QIR_WCEFE              	0x0800
-+#define QIR_ABRTE              	0x0400
-+#define QIR_SPIFE              	0x0100
-+
-+#define QIR_WCEFB              	0x8000
-+#define QIR_ABRTB              	0x4000
-+#define QIR_ABRTL              	0x1000
-+
-+#define QMR_BITS             	0x3C00
-+#define QMR_BITS_8              0x2000
-+
-+#define QCR_CONT              	0x8000
-+
-+#define QDLYR_SPE		0x8000
-+
-+#define QWR_ENDQP_MASK		0x0F00
-+#define QWR_CSIV		0x1000  /* 1 = active low chip selects */
-+
-+
-+#define START_STATE ((void*)0)
-+#define RUNNING_STATE ((void*)1)
-+#define DONE_STATE ((void*)2)
-+#define ERROR_STATE ((void*)-1)
-+
-+#define QUEUE_RUNNING 0
-+#define QUEUE_STOPPED 1
-+
-+/****************************************************************************/
-+
-+/*
-+ * Local Data Structures
-+ */
-+
-+struct transfer_state {
-+	u32 index;
-+	u32 len;
-+	void *tx;
-+	void *tx_end;
-+	void *rx;
-+	void *rx_end;
-+	char flags;
-+#define TRAN_STATE_RX_VOID	   0x01
-+#define TRAN_STATE_TX_VOID 	   0x02
-+#define TRAN_STATE_WORD_ODD_NUM	   0x04
-+	u8 cs;
-+	u16 void_write_data;
-+	unsigned cs_change:1;
-+};
-+
-+typedef struct {
-+	unsigned master:1;
-+	unsigned dohie:1;
-+	unsigned bits:4;
-+	unsigned cpol:1;
-+	unsigned cpha:1;
-+	unsigned baud:8;
-+} QMR;
-+
-+typedef struct {
-+	unsigned spe:1;
-+	unsigned qcd:7;
-+	unsigned dtl:8;
-+} QDLYR;
-+
-+typedef struct {
-+	unsigned halt:1;
-+	unsigned wren:1;
-+	unsigned wrto:1;
-+	unsigned csiv:1;
-+	unsigned endqp:4;
-+	unsigned cptqp:4;
-+	unsigned newqp:4;
-+} QWR;
-+
-+
-+typedef struct {
-+	unsigned master:1;
-+	unsigned cont_scke:1;
-+	unsigned dconf:2;
-+	unsigned frz:1;
-+	unsigned mtfe:1;
-+	unsigned pcsse:1;
-+	unsigned rooe:1;
-+	unsigned pcsis:8;
-+	unsigned reserved15:1;
-+	unsigned mdis:1;
-+	unsigned dis_tx:1;
-+	unsigned dis_rxf:1;
-+	unsigned clr_tx:1;
-+	unsigned clr_rxf:1;
-+	unsigned smpl_pt:2;
-+	unsigned reserved71:7;
-+	unsigned halt:1;
-+} DSPI_MCR;
-+
-+typedef struct {
-+	unsigned dbr:1;
-+	unsigned fmsz:4;
-+	unsigned cpol:1;
-+	unsigned cpha:1;
-+	unsigned lsbfe:1;
-+	unsigned pcssck:2;
-+	unsigned pasc:2;
-+	unsigned pdt:2;
-+	unsigned pbr:2;
-+	unsigned cssck:4;
-+	unsigned asc:4;
-+	unsigned dt:4;
-+	unsigned br:4;
-+} DSPI_CTAR;
-+
-+struct chip_data {
-+#if defined(SPI_DSPI)
-+	/* dspi data */
-+	union {
-+		u32 mcr_val;
-+		DSPI_MCR mcr;
-+	};
-+	union {
-+		u32 ctar_val;
-+		DSPI_CTAR ctar;
-+	};
-+#else
-+	union {
-+		u16 qmr_val;
-+		QMR qmr;
-+	};
-+	union {
-+		u16 qdlyr_val;
-+		QDLYR qdlyr;
-+	};
-+	union {
-+		u16 qwr_val;
-+		QWR qwr;
-+	};
-+#endif
-+
-+	u16 void_write_data;
-+};
-+
-+
-+struct driver_data {
-+	/* Driver model hookup */
-+	struct platform_device *pdev;
-+
-+	/* SPI framework hookup */
-+	struct spi_master *master;
-+
-+	/* Driver message queue */
-+	struct workqueue_struct	*workqueue;
-+	struct work_struct pump_messages;
-+	spinlock_t lock;
-+	struct list_head queue;
-+	int busy;
-+	int run;
-+
-+	/* Message Transfer pump */
-+	struct tasklet_struct pump_transfers;
-+
-+	/* Current message transfer state info */
-+	struct spi_message* cur_msg;
-+	struct spi_transfer* cur_transfer;
-+	struct chip_data *cur_chip;
-+	size_t len;
-+	void *tx;
-+	void *tx_end;
-+	void *rx;
-+	void *rx_end;
-+	char flags;
-+#define TRAN_STATE_RX_VOID	   0x01
-+#define TRAN_STATE_TX_VOID 	   0x02
-+#define TRAN_STATE_WORD_ODD_NUM	   0x04
-+	u8 cs;
-+	u16 void_write_data;
-+	unsigned cs_change:1;
-+
-+	u32 trans_cnt;
-+	u32 wce_cnt;
-+	u32 abrt_cnt;
-+#if defined(SPI_DSPI)
-+	u32 *mcr;			/* DSPI MCR register */
-+	u32 *ctar;			/* DSPI CTAR register */
-+	u32 *dspi_dtfr;		/* DSPI DTFR register */
-+	u32 *dspi_drfr;		/* DSPI DRFR register */
-+	u32 *dspi_rser;		/* DSPI RSER register */
-+	u32 *dspi_sr;		/* DSPI status register */
-+	u8	dspi_ctas;		/* DSPI CTAS value*/
-+#if defined(SPI_DSPI_EDMA)
-+	void*	edma_tx_buf;
-+	void*	edma_rx_buf;
-+#endif
-+#else
-+ 	u16 *qmr;          /* QSPI mode register      */
-+ 	u16 *qdlyr;        /* QSPI delay register     */
-+ 	u16 *qwr;	   /* QSPI wrap register      */
-+ 	u16 *qir;          /* QSPI interrupt register */
-+ 	u16 *qar;          /* QSPI address register   */
-+ 	u16 *qdr;          /* QSPI data register      */
-+ 	u16 *qcr;	   /* QSPI command register   */
-+#endif
-+#if defined(CONFIG_M532x) || defined(CONFIG_M537x)
-+ 	u16 *par;	   /* Pin assignment register */
-+#else
-+ 	u8  *par;	   /* Pin assignment register */
-+#endif
-+ 	u8  *int_icr;	   /* Interrupt level and priority register */
-+ 	u32 *int_mr;       /* Interrupt mask register */
-+ 	void (*cs_control)(u8 cs, u8 command);
-+};
-+
-+#define DSPI_CS(cs) ((1<<(cs))<<16)
-+
-+
-+/****************************************************************************/
-+
-+/*
-+ * SPI local functions
-+ */
-+
-+static void *next_transfer(struct driver_data *drv_data)
-+{
-+	struct spi_message *msg = drv_data->cur_msg;
-+	struct spi_transfer *trans = drv_data->cur_transfer;
-+
-+	/* Move to next transfer */
-+	if (trans->transfer_list.next != &msg->transfers) {
-+		drv_data->cur_transfer =
-+			list_entry(trans->transfer_list.next,
-+					struct spi_transfer,
-+					transfer_list);
-+		return RUNNING_STATE;
-+	} else
-+		return DONE_STATE;
-+}
-+
-+
-+#define DSPI_BITS MCF_DSPI_DCTAR_FMSZ(15)
-+#define DSPI_BITS_16 MCF_DSPI_DCTAR_FMSZ(15)
-+#define DSPI_BITS_8 MCF_DSPI_DCTAR_FMSZ(7)
-+#define DSPI_FIFO_SIZE 16
-+
-+static inline int is_word_transfer(struct driver_data *drv_data)
-+{
-+#if defined(SPI_DSPI)
-+	return ((*drv_data->ctar & DSPI_BITS_16) == DSPI_BITS_8) ? 0 : 1;
-+#else
-+	return ((*drv_data->qmr & QMR_BITS) == QMR_BITS_8) ? 0 : 1;
-+#endif
-+}
-+
-+static void inline set_8bit_transfer_mode(struct driver_data *drv_data)
-+{
-+#if defined(SPI_DSPI)
-+	*drv_data->ctar |= (*drv_data->ctar & ~DSPI_BITS) | DSPI_BITS_8;
-+#else
-+	*drv_data->qmr |= (*drv_data->qmr & ~QMR_BITS) | QMR_BITS_8;
-+#endif
-+}
-+
-+static void inline set_16bit_transfer_mode(struct driver_data *drv_data)
-+{
-+#if defined(SPI_DSPI)
-+	*drv_data->ctar |= (*drv_data->ctar & ~DSPI_BITS) | DSPI_BITS_16;
-+#else
-+	*drv_data->qmr |= (*drv_data->qmr & ~QMR_BITS);
-+#endif
-+}
-+
-+static int write(struct driver_data *drv_data)
-+{
-+ 	int tx_count = 0;
-+#ifndef SPI_DSPI
-+ 	int cmd_count = 0;
-+#endif
-+ 	int tx_word;
-+
-+#if defined(SPI_DSPI)
-+#if defined(SPI_DSPI_EDMA)
-+	u32* edma_wr;
-+#endif
-+ 	u16 d16;
-+ 	u8  d8;
-+ 	u32 dspi_pushr;
-+ 	int first = 1;
-+#endif
-+
-+	tx_word = is_word_transfer(drv_data);
-+
-+	/* If we are in word mode, but only have a single byte to transfer
-+	 * then switch to byte mode temporarily.  Will switch back at the
-+	 * end of the transfer. */
-+ 	if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1)) {
-+ 		drv_data->flags |= TRAN_STATE_WORD_ODD_NUM;
-+ 		set_8bit_transfer_mode(drv_data);
-+ 		tx_word = 0;
-+	}
-+
-+
-+#if defined(SPI_DSPI)
-+#if defined(SPI_DSPI_EDMA)
-+	edma_wr = (u32*)(drv_data->edma_tx_buf);
-+#endif
-+
-+#if defined(SPI_DSPI_EDMA)
-+	while ((drv_data->tx < drv_data->tx_end) && (tx_count < EDMA_BUFFER_SIZE)) {
-+#else
-+	while ((drv_data->tx < drv_data->tx_end) && (tx_count < DSPI_FIFO_SIZE)) {
-+#endif
-+		if (tx_word) {
-+			if ((drv_data->tx_end - drv_data->tx) == 1)
-+				break;
-+			if (!(drv_data->flags & TRAN_STATE_TX_VOID)) {
-+ 				d16 = *(u16 *)drv_data->tx;
-+			} else {
-+ 				d16 = drv_data->void_write_data;
-+			}
-+
-+			dspi_pushr = MCF_DSPI_DTFR_TXDATA(d16)
-+					| DSPI_CS(drv_data->cs)
-+					| MCF_DSPI_DTFR_CTAS(drv_data->dspi_ctas);
-+			drv_data->tx += 2;
-+
-+#if defined(SPI_DSPI_EDMA)
-+			if (drv_data->tx == drv_data->tx_end  || tx_count==EDMA_BUFFER_SIZE-1) {
-+#else
-+			if (drv_data->tx == drv_data->tx_end  || tx_count==DSPI_FIFO_SIZE-1) {
-+#endif
-+				/* last transfer in the queue */
-+				dspi_pushr |= MCF_DSPI_DTFR_EOQ;
-+				if (drv_data->cs_change) {
-+					dspi_pushr &= ~MCF_DSPI_DTFR_CONT;
-+				}
-+			}
-+
-+			if (first) {
-+				first = 0;
-+				dspi_pushr |= MCF_DSPI_DTFR_CTCNT; /* clear counter */
-+			}
-+#if defined(SPI_DSPI_EDMA)
-+			*edma_wr = dspi_pushr;
-+			edma_wr++;
-+#else
-+			*drv_data->dspi_dtfr = dspi_pushr;
-+#endif
-+
-+
-+		} else {
-+			if (!(drv_data->flags & TRAN_STATE_TX_VOID)) {
-+ 				d8 = *(u8 *)drv_data->tx;
-+			} else {
-+ 				d8 = *(u8 *)&drv_data->void_write_data;
-+			}
-+
-+			dspi_pushr = MCF_DSPI_DTFR_TXDATA(d8)
-+						 | DSPI_CS(drv_data->cs)
-+						 | MCF_DSPI_DTFR_CTAS(drv_data->dspi_ctas)
-+						 | MCF_DSPI_DTFR_CONT;
-+
-+			drv_data->tx++;
-+
-+			if (drv_data->tx == drv_data->tx_end  || tx_count==DSPI_FIFO_SIZE-1) {
-+				/* last transfer in the queue */
-+				dspi_pushr |= MCF_DSPI_DTFR_EOQ;
-+				if (drv_data->cs_change) {
-+					dspi_pushr &= ~MCF_DSPI_DTFR_CONT;
-+				}
-+			}
-+
-+			if (first) {
-+				first = 0;
-+				dspi_pushr |= MCF_DSPI_DTFR_CTCNT; /* clear counter */
-+			}
-+
-+#if defined(SPI_DSPI_EDMA)
-+			*edma_wr = dspi_pushr;
-+			edma_wr++;
-+#else
-+			*drv_data->dspi_dtfr = dspi_pushr;
-+#endif
-+
-+		}
-+		tx_count++;
-+	}
-+
-+#if defined(SPI_DSPI_EDMA)
-+
-+	if (tx_count>0) {
-+
-+		/* TBD: initiate eDMA transfer */
-+		mcf_edma_set_tcd_params(DSPI_DMA_TX_TCD,
-+#ifdef SPI_USE_MMU
-+					virt_to_phys(drv_data->edma_tx_buf),
-+#else
-+					drv_data->edma_tx_buf,
-+#endif
-+					(u32)drv_data->dspi_dtfr,
-+					MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
-+					4, /* soff */
-+					4, /* nbytes */
-+					0, /* slast */
-+					tx_count, /* citer */
-+					tx_count, /* biter */
-+					0, /* doff */
-+					0, /* dlastsga */
-+					0, /* major_int */
-+					1  /* disable_req */
-+					);
-+
-+		mcf_edma_set_tcd_params(DSPI_DMA_RX_TCD,
-+					(u32)drv_data->dspi_drfr,
-+#ifdef SPI_USE_MMU
-+					virt_to_phys(drv_data->edma_rx_buf),
-+#else
-+					drv_data->edma_rx_buf,
-+#endif
-+					MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
-+					0, /* soff */
-+					4, /* nbytes */
-+					0, /* slast */
-+					tx_count, /* citer */
-+					tx_count, /* biter */
-+					4, /* doff */
-+					0, /* dlastsga */
-+					0, /* major_int */
-+					1  /* disable_req */
-+					);
-+
-+
-+		start_edma_transfer(DSPI_DMA_TX_TCD); /* transmit SPI data */
-+		start_edma_transfer(DSPI_DMA_RX_TCD); /* receive SPI data */
-+	}
-+#endif
-+
-+#else
-+
-+	*drv_data->qar = QSPI_TRANSMIT_RAM;
-+ 	while ((drv_data->tx < drv_data->tx_end) && (tx_count < QSPI_RAM_SIZE)) {
-+ 		if (tx_word) {
-+			if ((drv_data->tx_end - drv_data->tx) == 1)
-+				break;
-+
-+ 			if (!(drv_data->flags & TRAN_STATE_TX_VOID))
-+ 				*drv_data->qdr = *(u16 *)drv_data->tx;
-+ 			else
-+ 				*drv_data->qdr = drv_data->void_write_data;
-+ 			drv_data->tx += 2;
-+ 		} else {
-+ 			if (!(drv_data->flags & TRAN_STATE_TX_VOID))
-+ 				*drv_data->qdr = *(u8 *)drv_data->tx;
-+ 			else
-+ 				*drv_data->qdr = *(u8 *)&drv_data->void_write_data;
-+ 			drv_data->tx++;
-+ 		}
-+ 		tx_count++;
-+ 	}
-+
-+
-+ 	*drv_data->qar = QSPI_COMMAND_RAM;
-+ 	while (cmd_count < tx_count) {
-+		u16 qcr =   QSPI_COMMAND
-+			  | QCR_CONT
-+			  | (~((0x01 << drv_data->cs) << 8) & 0x0F00);
-+
-+		if ( (cmd_count == tx_count - 1)
-+		     && (drv_data->tx == drv_data->tx_end)
-+		     && (drv_data->cs_change) ) {
-+			qcr &= ~QCR_CONT;
-+		}
-+		*drv_data->qcr = qcr;
-+		cmd_count++;
-+	}
-+
-+	*drv_data->qwr = (*drv_data->qwr & ~QWR_ENDQP_MASK) | ((cmd_count - 1) << 8);
-+
-+ 	/* Fire it up! */
-+ 	*drv_data->qdlyr |= QDLYR_SPE;
-+#endif
-+
-+ 	return tx_count;
-+}
-+
-+
-+static int read(struct driver_data *drv_data)
-+{
-+	int rx_count = 0;
-+	int rx_word;
-+#if defined(SPI_DSPI_EDMA)
-+	u32* rx_edma;
-+#endif
-+	u16 d;
-+	rx_word = is_word_transfer(drv_data);
-+
-+#if defined(SPI_DSPI)
-+#if defined(SPI_DSPI_EDMA)
-+	rx_edma = (u32*) drv_data->edma_tx_buf;
-+	while ((drv_data->rx < drv_data->rx_end) && (rx_count < EDMA_BUFFER_SIZE)) {
-+#else
-+	while ((drv_data->rx < drv_data->rx_end) && (rx_count < DSPI_FIFO_SIZE)) {
-+#endif
-+		if (rx_word) {
-+			if ((drv_data->rx_end - drv_data->rx) == 1)
-+				break;
-+#if defined(SPI_DSPI_EDMA)
-+			d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
-+			rx_edma++;
-+#else
-+			d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr);
-+#endif
-+
-+			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
-+				*(u16 *)drv_data->rx = d;
-+			drv_data->rx += 2;
-+		} else {
-+#if defined(SPI_DSPI_EDMA)
-+			d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
-+			rx_edma++;
-+#else
-+			d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr);
-+#endif
-+			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
-+				*(u8 *)drv_data->rx = d;
-+			drv_data->rx++;
-+		}
-+		rx_count++;
-+	}
-+#else
-+	*drv_data->qar = QSPI_RECEIVE_RAM;
-+	while ((drv_data->rx < drv_data->rx_end) && (rx_count < QSPI_RAM_SIZE)) {
-+		if (rx_word) {
-+			if ((drv_data->rx_end - drv_data->rx) == 1)
-+				break;
-+
-+			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
-+				*(u16 *)drv_data->rx = *drv_data->qdr;
-+			drv_data->rx += 2;
-+		} else {
-+			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
-+				*(u8 *)drv_data->rx = *drv_data->qdr;
-+			drv_data->rx++;
-+		}
-+		rx_count++;
-+	}
-+#endif
-+
-+	return rx_count;
-+}
-+
-+
-+static inline void qspi_setup_chip(struct driver_data *drv_data)
-+{
-+	struct chip_data *chip = drv_data->cur_chip;
-+
-+#if defined(SPI_DSPI)
-+
-+	*drv_data->mcr = chip->mcr_val;
-+
-+	/* TBD: remove later */
-+/* JKM -- validate */
-+	chip->ctar_val = 0x78560118;
-+
-+	*drv_data->ctar = chip->ctar_val;
-+	*drv_data->dspi_rser =  0
-+				| MCF_DSPI_DRSER_EOQFE
-+#if defined(SPI_DSPI_EDMA)
-+				| MCF_DSPI_DRSER_TFFFE
-+				| MCF_DSPI_DRSER_TFFFS
-+#endif
-+				;
-+#else
-+	*drv_data->qmr = chip->qmr_val;
-+	*drv_data->qdlyr = chip->qdlyr_val;
-+	*drv_data->qwr = chip->qwr_val;
-+
-+	/*
-+	 * Enable all the interrupts and clear all the flags
-+	 */
-+	*drv_data->qir =  (QIR_SPIFE | QIR_ABRTE | QIR_WCEFE)
-+			| (QIR_WCEFB | QIR_ABRTB | QIR_ABRTL)
-+			| (QIR_SPIF  | QIR_ABRT  | QIR_WCEF);
-+#endif
-+}
-+
-+#if defined(SPI_DSPI_EDMA)
-+static int edma_tx_handler(int channel, void* dev)
-+{
-+	if (channel == DSPI_DMA_TX_TCD) {
-+		stop_edma_transfer(DSPI_DMA_TX_TCD);
-+	}
-+	return IRQ_HANDLED;
-+}
-+
-+static int edma_rx_handler(int channel, void* dev)
-+{
-+	if (channel == DSPI_DMA_RX_TCD) {
-+		stop_edma_transfer(DSPI_DMA_RX_TCD);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+#endif
-+
-+static irqreturn_t qspi_interrupt(int irq, void *dev_id)
-+{
-+	struct driver_data *drv_data = (struct driver_data *)dev_id;
-+	struct spi_message *msg = drv_data->cur_msg;
-+#if defined(SPI_DSPI)
-+#if !defined(SPI_DSPI_EDMA)
-+ 	u32 irq_status = *drv_data->dspi_sr;
-+#endif
-+#else
-+	u16 irq_status = *drv_data->qir;
-+#endif
-+
-+	/* Clear all flags immediately */
-+#if defined(SPI_DSPI)
-+	*drv_data->dspi_sr = MCF_DSPI_DSR_EOQF;
-+#else
-+	*drv_data->qir |= (QIR_SPIF | QIR_ABRT | QIR_WCEF);
-+#endif
-+
-+	if (!drv_data->cur_msg || !drv_data->cur_msg->state) {
-+#if !defined(SPI_DSPI_EDMA)
-+		/* if eDMA is used it happens some time (at least once)*/
-+		printk(KERN_ERR "coldfire-qspi: bad message or transfer "
-+		"state in interrupt handler. IRQ status=%x\n", irq_status);
-+#endif
-+		return IRQ_NONE;
-+	}
-+
-+#if !defined(SPI_DSPI)
-+	if (irq_status & QIR_SPIF) {
-+#endif
-+		/*
-+		 * Read the data into the buffer and reload and start
-+		 * queue with new data if not finished.  If finished
-+		 * then setup the next transfer
-+		 */
-+		 read(drv_data);
-+
-+		 if (drv_data->rx == drv_data->rx_end) {
-+			/*
-+			 * Finished now - fall through and schedule next
-+			 * transfer tasklet
-+			 */
-+			if (drv_data->flags & TRAN_STATE_WORD_ODD_NUM) {
-+				set_16bit_transfer_mode(drv_data);
-+			}
-+
-+			msg->state = next_transfer(drv_data);
-+			msg->actual_length += drv_data->len;
-+		 } else {
-+			/* not finished yet - keep going */
-+		 	write(drv_data);
-+		 	return IRQ_HANDLED;
-+		 }
-+#if !defined(SPI_DSPI)
-+	} else {
-+		if (irq_status & QIR_WCEF)
-+			drv_data->wce_cnt++;
-+
-+		if (irq_status & QIR_ABRT)
-+			drv_data->abrt_cnt++;
-+
-+		msg->state = ERROR_STATE;
-+	}
-+#endif
-+
-+	tasklet_schedule(&drv_data->pump_transfers);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/* caller already set message->status; dma and pio irqs are blocked */
-+static void giveback(struct driver_data *drv_data)
-+{
-+	struct spi_transfer* last_transfer;
-+	unsigned long flags;
-+	struct spi_message *msg;
-+
-+	spin_lock_irqsave(&drv_data->lock, flags);
-+	msg = drv_data->cur_msg;
-+	drv_data->cur_msg = NULL;
-+	drv_data->cur_transfer = NULL;
-+	drv_data->cur_chip = NULL;
-+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
-+	spin_unlock_irqrestore(&drv_data->lock, flags);
-+
-+	last_transfer = list_entry(msg->transfers.prev,
-+					struct spi_transfer,
-+					transfer_list);
-+
-+	if (!last_transfer->cs_change)
-+		drv_data->cs_control(drv_data->cs, QSPI_CS_DROP);
-+
-+	msg->state = NULL;
-+	if (msg->complete)
-+		msg->complete(msg->context);
-+}
-+
-+
-+static void pump_transfers(unsigned long data)
-+{
-+	struct driver_data *drv_data = (struct driver_data *)data;
-+	struct spi_message *message = NULL;
-+	struct spi_transfer *transfer = NULL;
-+	struct spi_transfer *previous = NULL;
-+	struct chip_data *chip = NULL;
-+	unsigned long flags;
-+
-+	/* Get current state information */
-+	message = drv_data->cur_msg;
-+	transfer = drv_data->cur_transfer;
-+	chip = drv_data->cur_chip;
-+
-+	/* Handle for abort */
-+	if (message->state == ERROR_STATE) {
-+		message->status = -EIO;
-+		giveback(drv_data);
-+		return;
-+	}
-+
-+	/* Handle end of message */
-+	if (message->state == DONE_STATE) {
-+		message->status = 0;
-+		giveback(drv_data);
-+		return;
-+	}
-+
-+	if (message->state == START_STATE) {
-+		qspi_setup_chip(drv_data);
-+
-+		if (drv_data->cs_control)
-+			drv_data->cs_control(message->spi->chip_select, QSPI_CS_ASSERT);
-+	}
-+
-+	/* Delay if requested at end of transfer*/
-+	if (message->state == RUNNING_STATE) {
-+		previous = list_entry(transfer->transfer_list.prev,
-+					struct spi_transfer,
-+					transfer_list);
-+
-+		if (drv_data->cs_control && transfer->cs_change)
-+			drv_data->cs_control(message->spi->chip_select, QSPI_CS_DROP);
-+
-+		if (previous->delay_usecs)
-+			udelay(previous->delay_usecs);
-+
-+		if (drv_data->cs_control && transfer->cs_change)
-+			drv_data->cs_control(message->spi->chip_select, QSPI_CS_ASSERT);
-+	}
-+
-+	drv_data->flags = 0;
-+	drv_data->tx = (void *)transfer->tx_buf;
-+	drv_data->tx_end = drv_data->tx + transfer->len;
-+	drv_data->rx = transfer->rx_buf;
-+	drv_data->rx_end = drv_data->rx + transfer->len;
-+	drv_data->len = transfer->len;
-+	if (!drv_data->rx)
-+		drv_data->flags |= TRAN_STATE_RX_VOID;
-+	if (!drv_data->tx)
-+		drv_data->flags |= TRAN_STATE_TX_VOID;
-+	drv_data->cs = message->spi->chip_select;
-+	drv_data->cs_change = transfer->cs_change;
-+	drv_data->void_write_data = chip->void_write_data;
-+
-+	message->state = RUNNING_STATE;
-+
-+	/* Go baby, go */
-+	local_irq_save(flags);
-+	write(drv_data);
-+	local_irq_restore(flags);
-+}
-+
-+
-+static void pump_messages(struct work_struct *work)
-+{
-+	struct driver_data *drv_data;
-+	unsigned long flags;
-+
-+	drv_data = container_of(work, struct driver_data, pump_messages);
-+
-+	/* Lock queue and check for queue work */
-+	spin_lock_irqsave(&drv_data->lock, flags);
-+	if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
-+		drv_data->busy = 0;
-+		spin_unlock_irqrestore(&drv_data->lock, flags);
-+		return;
-+	}
-+
-+	/* Make sure we are not already running a message */
-+	if (drv_data->cur_msg) {
-+		spin_unlock_irqrestore(&drv_data->lock, flags);
-+		return;
-+	}
-+
-+	/* Extract head of queue */
-+	drv_data->cur_msg = list_entry(drv_data->queue.next,
-+					struct spi_message, queue);
-+	list_del_init(&drv_data->cur_msg->queue);
-+
-+	/* Initial message state*/
-+	drv_data->cur_msg->state = START_STATE;
-+	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
-+						struct spi_transfer,
-+						transfer_list);
-+
-+	/* Setup the SPI Registers using the per chip configuration */
-+	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
-+
-+	/* Mark as busy and launch transfers */
-+	tasklet_schedule(&drv_data->pump_transfers);
-+
-+	drv_data->busy = 1;
-+	spin_unlock_irqrestore(&drv_data->lock, flags);
-+}
-+
-+/****************************************************************************/
-+
-+/*
-+ * SPI master implementation
-+ */
-+
-+static int transfer(struct spi_device *spi, struct spi_message *msg)
-+{
-+	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&drv_data->lock, flags);
-+
-+	if (drv_data->run == QUEUE_STOPPED) {
-+		spin_unlock_irqrestore(&drv_data->lock, flags);
-+		return -ESHUTDOWN;
-+	}
-+
-+	msg->actual_length = 0;
-+	msg->status = -EINPROGRESS;
-+	msg->state = START_STATE;
-+
-+	list_add_tail(&msg->queue, &drv_data->queue);
-+
-+	if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
-+		queue_work(drv_data->workqueue, &drv_data->pump_messages);
-+
-+	spin_unlock_irqrestore(&drv_data->lock, flags);
-+
-+	return 0;
-+}
-+
-+
-+static int setup(struct spi_device *spi)
-+{
-+	struct coldfire_spi_chip *chip_info;
-+	struct chip_data *chip;
-+#ifndef SPI_DSPI
-+	u32 baud_divisor = 255;
-+#endif
-+
-+	chip_info = (struct coldfire_spi_chip *)spi->controller_data;
-+
-+	/* Only alloc on first setup */
-+	chip = spi_get_ctldata(spi);
-+	if (chip == NULL) {
-+ 		chip = kcalloc(1, sizeof(struct chip_data), GFP_KERNEL);
-+		if (!chip)
-+			return -ENOMEM;
-+		spi->mode = chip_info->mode;
-+		spi->bits_per_word = chip_info->bits_per_word;
-+	}
-+
-+#if defined(SPI_DSPI)
-+	chip->mcr.master = 1;
-+	chip->mcr.cont_scke = 0;
-+	chip->mcr.dconf = 0;
-+	chip->mcr.frz = 0;
-+	chip->mcr.mtfe = 0;
-+	chip->mcr.pcsse = 0;
-+	chip->mcr.rooe = 0;
-+	chip->mcr.pcsis = 0xFF;
-+	chip->mcr.reserved15 = 0;
-+	chip->mcr.mdis = 0;
-+	chip->mcr.dis_tx = 0;
-+	chip->mcr.dis_rxf = 0;
-+	chip->mcr.clr_tx = 1;
-+	chip->mcr.clr_rxf = 1;
-+	chip->mcr.smpl_pt = 0;
-+	chip->mcr.reserved71 = 0;
-+	chip->mcr.halt = 0;
-+
-+	if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) {
-+		chip->ctar.fmsz = spi->bits_per_word-1;
-+	} else {
-+		printk(KERN_ERR "coldfire-spi: invalid wordsize\n");
-+		kfree(chip);
-+		return -ENODEV;
-+	}
-+
-+	if (spi->mode & SPI_CPHA)
-+		chip->ctar.cpha = 1;
-+	else
-+		chip->ctar.cpha = 0;
-+
-+	if (spi->mode & SPI_CPOL)
-+		chip->ctar.cpol = 1;
-+	else
-+		chip->ctar.cpol = 0;
-+
-+	if (spi->mode & SPI_LSB_FIRST)
-+		chip->ctar.lsbfe = 1;
-+	else
-+		chip->ctar.lsbfe = 0;
-+
-+	/* This values are default for audio device */
-+	chip->ctar.dbr = 0;
-+	chip->ctar.pbr = 2;
-+	chip->ctar.br = 8;
-+
-+	/* This values are default for audio device */
-+	chip->ctar.pcssck = 1;
-+	chip->ctar.pasc = 1;
-+	chip->ctar.pdt = 1;
-+	chip->ctar.cssck = 0;
-+	chip->ctar.asc = 1;
-+	chip->ctar.dt = 1;
-+
-+	chip->void_write_data = chip_info->void_write_data;
-+
-+#else
-+
-+	chip->qwr.csiv = 1;    /* Chip selects are active low */
-+	chip->qmr.master = 1;  /* Must set to master mode */
-+	chip->qmr.dohie = 1;   /* Data output high impediance enabled */
-+	chip->void_write_data = chip_info->void_write_data;
-+
-+	chip->qdlyr.qcd = chip_info->del_cs_to_clk;
-+	chip->qdlyr.dtl = chip_info->del_after_trans;
-+
-+	if (spi->max_speed_hz != 0)
-+		baud_divisor = (MCF_CLK/(2*spi->max_speed_hz));
-+
-+	if (baud_divisor < 2)
-+		baud_divisor = 2;
-+
-+	if (baud_divisor > 255)
-+		baud_divisor = 255;
-+
-+	chip->qmr.baud = baud_divisor;
-+
-+	/*printk( "SPI: spi->max_speed_hz %d\n", spi->max_speed_hz );*/
-+	/*printk( "SPI: Baud set to %d\n", chip->qmr.baud );*/
-+
-+	if (spi->mode & SPI_CPHA)
-+		chip->qmr.cpha = 1;
-+
-+	if (spi->mode & SPI_CPOL)
-+		chip->qmr.cpol = 1;
-+
-+	if (spi->bits_per_word == 16) {
-+		chip->qmr.bits = 0;
-+	} else if ((spi->bits_per_word >= 8) && (spi->bits_per_word <= 15)) {
-+		chip->qmr.bits = spi->bits_per_word;
-+	} else {
-+		printk(KERN_ERR "coldfire-spi: invalid wordsize\n");
-+		kfree(chip);
-+		return -ENODEV;
-+	}
-+
-+#endif
-+
-+ 	spi_set_ctldata(spi, chip);
-+
-+ 	return 0;
-+}
-+
-+static int init_queue(struct driver_data *drv_data)
-+{
-+	INIT_LIST_HEAD(&drv_data->queue);
-+	spin_lock_init(&drv_data->lock);
-+
-+	drv_data->run = QUEUE_STOPPED;
-+	drv_data->busy = 0;
-+
-+	tasklet_init(&drv_data->pump_transfers,
-+			pump_transfers,	(unsigned long)drv_data);
-+
-+	INIT_WORK(&drv_data->pump_messages, pump_messages);
-+
-+	drv_data->workqueue = create_singlethread_workqueue(
-+					drv_data->master->dev.parent->bus_id);
-+	if (drv_data->workqueue == NULL)
-+		return -EBUSY;
-+
-+	return 0;
-+}
-+
-+static int start_queue(struct driver_data *drv_data)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&drv_data->lock, flags);
-+
-+	if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
-+		spin_unlock_irqrestore(&drv_data->lock, flags);
-+		return -EBUSY;
-+	}
-+
-+	drv_data->run = QUEUE_RUNNING;
-+	drv_data->cur_msg = NULL;
-+	drv_data->cur_transfer = NULL;
-+	drv_data->cur_chip = NULL;
-+	spin_unlock_irqrestore(&drv_data->lock, flags);
-+
-+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
-+
-+	return 0;
-+}
-+
-+static int stop_queue(struct driver_data *drv_data)
-+{
-+	unsigned long flags;
-+	unsigned limit = 500;
-+	int status = 0;
-+
-+	spin_lock_irqsave(&drv_data->lock, flags);
-+
-+	/* This is a bit lame, but is optimized for the common execution path.
-+	 * A wait_queue on the drv_data->busy could be used, but then the common
-+	 * execution path (pump_messages) would be required to call wake_up or
-+	 * friends on every SPI message. Do this instead */
-+	drv_data->run = QUEUE_STOPPED;
-+	while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
-+		spin_unlock_irqrestore(&drv_data->lock, flags);
-+		msleep(10);
-+		spin_lock_irqsave(&drv_data->lock, flags);
-+	}
-+
-+	if (!list_empty(&drv_data->queue) || drv_data->busy)
-+		status = -EBUSY;
-+
-+	spin_unlock_irqrestore(&drv_data->lock, flags);
-+
-+	return status;
-+}
-+
-+static int destroy_queue(struct driver_data *drv_data)
-+{
-+	int status;
-+
-+	status = stop_queue(drv_data);
-+	if (status != 0)
-+		return status;
-+
-+	destroy_workqueue(drv_data->workqueue);
-+
-+	return 0;
-+}
-+
-+
-+static void cleanup(struct spi_device *spi)
-+{
-+	struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
-+
-+ 	dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n",
-+ 		spi->master->bus_num, spi->chip_select);
-+
-+	kfree(chip);
-+}
-+
-+
-+/****************************************************************************/
-+
-+/*
-+ * Generic Device driver routines and interface implementation
-+ */
-+
-+static int coldfire_spi_probe(struct platform_device *pdev)
-+{
-+ 	struct device *dev = &pdev->dev;
-+ 	struct coldfire_spi_master *platform_info;
-+ 	struct spi_master *master;
-+ 	struct driver_data *drv_data = 0;
-+ 	struct resource *memory_resource;
-+	int irq;
-+	int status = 0;
-+	int i;
-+
-+	platform_info = (struct coldfire_spi_master *)pdev->dev.platform_data;
-+
-+  	master = spi_alloc_master(dev, sizeof(struct driver_data));
-+  	if (!master)
-+ 		return -ENOMEM;
-+
-+ 	drv_data = spi_master_get_devdata(master);
-+ 	drv_data->master = master;
-+
-+	INIT_LIST_HEAD(&drv_data->queue);
-+	spin_lock_init(&drv_data->lock);
-+
-+	master->bus_num = platform_info->bus_num;
-+	master->num_chipselect = platform_info->num_chipselect;
-+	master->cleanup = cleanup;
-+	master->setup = setup;
-+	master->transfer = transfer;
-+
-+ 	drv_data->cs_control = platform_info->cs_control;
-+ 	if (drv_data->cs_control)
-+ 		for(i = 0; i < master->num_chipselect; i++)
-+ 			drv_data->cs_control(i, QSPI_CS_INIT | QSPI_CS_DROP);
-+
-+	/* Setup register addresses */
-+ 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-module");
-+ 	if (!memory_resource) {
-+ 		dev_dbg(dev, "can not find platform module memory\n");
-+ 		goto out_error_master_alloc;
-+ 	}
-+
-+#if defined(SPI_DSPI_EDMA)
-+ 	drv_data->edma_tx_buf = kmalloc(EDMA_BUFSIZE_KMALLOC, GFP_DMA);
-+ 	if (!drv_data->edma_tx_buf) {
-+	 	dev_dbg(dev, "cannot allocate eDMA TX memory\n");
-+	 	goto out_error_master_alloc;
-+ 	}
-+ 	drv_data->edma_rx_buf = kmalloc(EDMA_BUFSIZE_KMALLOC, GFP_DMA);
-+ 	if (!drv_data->edma_rx_buf) {
-+	 	kfree(drv_data->edma_tx_buf);
-+	 	dev_dbg(dev, "cannot allocate eDMA RX memory\n");
-+	 	goto out_error_master_alloc;
-+ 	}
-+#endif
-+ 	
-+#if defined(SPI_DSPI)
-+
-+	drv_data->mcr	    = (void *)(memory_resource->start + 0x00000000);
-+	drv_data->ctar	    = (void *)(memory_resource->start + 0x0000000C);
-+	drv_data->dspi_sr   = (void *)(memory_resource->start + 0x0000002C);
-+	drv_data->dspi_rser = (void *)(memory_resource->start + 0x00000030);
-+	drv_data->dspi_dtfr = (void *)(memory_resource->start + 0x00000034);
-+	drv_data->dspi_drfr = (void *)(memory_resource->start + 0x00000038);
-+
-+#else
-+
-+ 	drv_data->qmr   = (void *)(memory_resource->start + 0x00000000);
-+ 	drv_data->qdlyr = (void *)(memory_resource->start + 0x00000004);
-+ 	drv_data->qwr   = (void *)(memory_resource->start + 0x00000008);
-+ 	drv_data->qir   = (void *)(memory_resource->start + 0x0000000c);
-+ 	drv_data->qar   = (void *)(memory_resource->start + 0x00000010);
-+ 	drv_data->qdr   = (void *)(memory_resource->start + 0x00000014);
-+ 	drv_data->qcr   = (void *)(memory_resource->start + 0x00000014);
-+
-+#endif
-+
-+	/* Setup register addresses */
-+ 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-par");
-+ 	if (!memory_resource) {
-+ 		dev_dbg(dev, "can not find platform par memory\n");
-+ 		goto out_error_master_alloc;
-+ 	}
-+
-+ 	drv_data->par = (void *)memory_resource->start;
-+
-+	/* Setup register addresses */
-+ 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-int-level");
-+ 	if (!memory_resource) {
-+ 		dev_dbg(dev, "can not find platform par memory\n");
-+ 		goto out_error_master_alloc;
-+ 	}
-+
-+ 	drv_data->int_icr = (void *)memory_resource->start;
-+
-+	/* Setup register addresses */
-+ 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-int-mask");
-+ 	if (!memory_resource) {
-+ 		dev_dbg(dev, "can not find platform par memory\n");
-+ 		goto out_error_master_alloc;
-+ 	}
-+
-+ 	drv_data->int_mr = (void *)memory_resource->start;
-+
-+	if (platform_info->irq_list) {
-+		/* multiple IRQs */
-+		int *irqlist = platform_info->irq_list;
-+		while ((irq = *irqlist++)) {
-+			int off = *irqlist++;
-+			int lvl = *irqlist++;
-+			int msk = *irqlist++;
-+			status = request_irq(irq, qspi_interrupt, IRQF_DISABLED,
-+					     dev->bus_id, drv_data);
-+			if (status < 0) {
-+				dev_err(&pdev->dev, 
-+					"unable to attach ColdFire DSPI interrupt\n");
-+				goto out_error_master_alloc;
-+			}
-+
-+			if (lvl)
-+				*(drv_data->int_icr + off) = lvl;
-+
-+			if (msk)
-+				*drv_data->int_mr &= ~msk;
-+		}
-+	}
-+	else {
-+		irq = platform_info->irq_vector;
-+
-+		status = request_irq(platform_info->irq_vector, qspi_interrupt,
-+				     IRQF_DISABLED, dev->bus_id, drv_data);
-+		if (status < 0) {
-+			dev_err(&pdev->dev, "unable to attach ColdFire QSPI interrupt\n");
-+			goto out_error_master_alloc;
-+		}
-+
-+		*drv_data->int_icr = platform_info->irq_lp;
-+		*drv_data->int_mr &= ~platform_info->irq_mask;
-+	}
-+
-+	/* Now that we have all the addresses etc.  Let's set it up */
-+	if (platform_info->par_val)
-+		*drv_data->par = platform_info->par_val;
-+
-+#ifdef CONFIG_M5227x
-+	MCF_GPIO_PAR_IRQ = 0x04; /* Mistake in RM documentation */
-+#endif
-+
-+#ifdef SPI_DSPI
-+	drv_data->dspi_ctas = 0; /* TBD: change later */
-+#endif
-+
-+	/* Initial and start queue */
-+	status = init_queue(drv_data);
-+	if (status != 0) {
-+		dev_err(&pdev->dev, "problem initializing queue\n");
-+		goto out_error_irq_alloc;
-+	}
-+	status = start_queue(drv_data);
-+	if (status != 0) {
-+		dev_err(&pdev->dev, "problem starting queue\n");
-+		goto out_error_irq_alloc;
-+	}
-+
-+	/* Register with the SPI framework */
-+	platform_set_drvdata(pdev, drv_data);
-+	status = spi_register_master(master);
-+	if (status != 0) {
-+		dev_err(&pdev->dev, "problem registering spi master\n");
-+		status = -EINVAL;
-+                goto out_error_queue_alloc;
-+	}
-+
-+#if defined(SPI_DSPI_EDMA)
-+	if (mcf_edma_request_channel(DSPI_DMA_TX_TCD,
-+				     edma_tx_handler,
-+				     NULL,
-+				     pdev,
-+				     NULL, /* spinlock */
-+				     DRIVER_NAME
-+				     )!=0) {
-+		dev_err(&pdev->dev, "problem requesting edma transmit channel\n");
-+		status = -EINVAL;
-+		goto out_error_queue_alloc;
-+	}
-+
-+	if (mcf_edma_request_channel(DSPI_DMA_RX_TCD,
-+				     edma_rx_handler,
-+				     NULL,
-+				     pdev,
-+				     NULL, /* spinlock */
-+				     DRIVER_NAME
-+				     )!=0) {
-+		dev_err(&pdev->dev, "problem requesting edma receive channel\n");
-+		status = -EINVAL;
-+		goto out_edma_transmit;
-+	}
-+#endif
-+
-+	printk(KERN_INFO "SPI: Coldfire master initialized\n" );
-+	return status;
-+
-+#if defined(SPI_DSPI_EDMA)
-+out_edma_transmit:
-+	mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev);
-+#endif
-+
-+out_error_queue_alloc:
-+	destroy_queue(drv_data);
-+
-+out_error_irq_alloc:
-+	free_irq(irq, drv_data);
-+
-+out_error_master_alloc:
-+	spi_master_put(master);
-+	return status;
-+
-+}
-+
-+static int coldfire_spi_remove(struct platform_device *pdev)
-+{
-+	struct driver_data *drv_data = platform_get_drvdata(pdev);
-+	int irq;
-+	int status = 0;
-+
-+	if (!drv_data)
-+		return 0;
-+
-+#if defined(SPI_DSPI_EDMA)
-+	mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev);
-+	mcf_edma_free_channel(DSPI_DMA_RX_TCD, pdev);
-+#endif	
-+
-+	/* Remove the queue */
-+	status = destroy_queue(drv_data);
-+	if (status != 0)
-+		return status;
-+
-+	/* Release IRQ */
-+/* JKM -- check for list and remove list */
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq >= 0)
-+		free_irq(irq, drv_data);
-+
-+	/* Disconnect from the SPI framework */
-+	spi_unregister_master(drv_data->master);
-+
-+	/* Prevent double remove */
-+	platform_set_drvdata(pdev, NULL);
-+
-+	return 0;
-+}
-+
-+static void coldfire_spi_shutdown(struct platform_device *pdev)
-+{
-+	int status = 0;
-+
-+	if ((status = coldfire_spi_remove(pdev)) != 0)
-+		dev_err(&pdev->dev, "shutdown failed with %d\n", status);
-+}
-+
-+
-+#ifdef CONFIG_PM
-+static int suspend_devices(struct device *dev, void *pm_message)
-+{
-+	pm_message_t *state = pm_message;
-+
-+	if (dev->power.power_state.event != state->event) {
-+		dev_warn(dev, "pm state does not match request\n");
-+		return -1;
-+	}
-+
-+	return 0;
-+}
-+
-+static int coldfire_spi_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	struct driver_data *drv_data = platform_get_drvdata(pdev);
-+	int status = 0;
-+
-+	/* Check all childern for current power state */
-+	if (device_for_each_child(&pdev->dev, &state, suspend_devices) != 0) {
-+		dev_warn(&pdev->dev, "suspend aborted\n");
-+		return -1;
-+	}
-+
-+	status = stop_queue(drv_data);
-+	if (status != 0)
-+		return status;
-+
-+	return 0;
-+}
-+
-+static int coldfire_spi_resume(struct platform_device *pdev)
-+{
-+	struct driver_data *drv_data = platform_get_drvdata(pdev);
-+	int status = 0;
-+
-+	/* Start the queue running */
-+	status = start_queue(drv_data);
-+	if (status != 0) {
-+		dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
-+		return status;
-+	}
-+
-+	return 0;
-+}
-+#else
-+#define coldfire_spi_suspend NULL
-+#define coldfire_spi_resume NULL
-+#endif /* CONFIG_PM */
-+
-+static struct platform_driver driver = {
-+	.driver = {
-+		.name = "spi_coldfire",
-+		.bus = &platform_bus_type,
-+		.owner = THIS_MODULE,
-+	},
-+	.probe = coldfire_spi_probe,
-+	.remove = __devexit_p(coldfire_spi_remove),
-+	.shutdown = coldfire_spi_shutdown,
-+	.suspend = coldfire_spi_suspend,
-+	.resume = coldfire_spi_resume,
-+};
-+
-+static int __init coldfire_spi_init(void)
-+{
-+	platform_driver_register(&driver);
-+
-+	return 0;
-+}
-+module_init(coldfire_spi_init);
-+
-+static void __exit coldfire_spi_exit(void)
-+{
-+	platform_driver_unregister(&driver);
-+}
-+module_exit(coldfire_spi_exit);
---- /dev/null
-+++ b/drivers/spi/spi-m5445x.c
-@@ -0,0 +1,156 @@
-+/***************************************************************************/
-+/*
-+ *	linux/arch/m68k/coldfire/spi-m5445x.c
-+ *
-+ *	Sub-architcture dependant initialization code for the Freescale
-+ *	5445x SPI module
-+ *
-+ *	Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
-+ *	Copyright Freescale Semiconductor, Inc 2007
-+ *
-+ *	This program is free software; you can redistribute it and/or modify
-+ *	it under the terms of the GNU General Public License as published by
-+ *	the Free Software Foundation; either version 2 of the License, or 
-+ *	(at your option) any later version.
-+ */
-+/***************************************************************************/
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/param.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+
-+#include <asm/dma.h>
-+#include <asm/traps.h>
-+#include <asm/machdep.h>
-+#include <asm/coldfire.h>
-+#include <asm/mcfsim.h>
-+#include <asm/mcfqspi.h>
-+#include <asm/mcf5445x_gpio.h>
-+
-+#define SPI_NUM_CHIPSELECTS 	0x10
-+#define SPI_PAR_VAL  (0 | MCF_GPIO_PAR_DSPI_PCS5_PCS5 | MCF_GPIO_PAR_DSPI_PCS2_PCS2 \
-+		| MCF_GPIO_PAR_DSPI_PCS1_PCS1 | MCF_GPIO_PAR_DSPI_PCS0_PCS0 | MCF_GPIO_PAR_DSPI_SIN_SIN \
-+		| MCF_GPIO_PAR_DSPI_SOUT_SOUT | MCF_GPIO_PAR_DSPI_SCK_SCK)
-+
-+#define MCF5445x_DSPI_IRQ_SOURCE	(31)
-+#define MCF5445x_DSPI_IRQ_VECTOR	(64 + MCF5445x_DSPI_IRQ_SOURCE)
-+
-+#define MCF5445x_DSPI_PAR	(0xFC0A4063)
-+#define MCF5445x_DSPI_MCR	(0xFC05C000)
-+#define MCF5445x_INTC0_ICR	(0xFC048040)
-+#define MCF5445x_INTC0_IMRL	(0xFC04800C)
-+
-+
-+#define M5445x_AUDIO_IRQ_SOURCE 49
-+#define M5445x_AUDIO_IRQ_VECTOR (128+M5445x_AUDIO_IRQ_SOURCE)
-+#define M5445x_AUDIO_IRQ_LEVEL	4
-+
-+void coldfire_qspi_cs_control(u8 cs, u8 command)
-+{
-+}
-+
-+#if defined(CONFIG_SPI_COLDFIRE_SSI_AUDIO)
-+static struct coldfire_spi_chip ssi_audio_chip_info = {
-+	.mode = SPI_MODE_0,
-+	.bits_per_word = 16,
-+	.del_cs_to_clk = 16,
-+	.del_after_trans = 16,
-+	.void_write_data = 0
-+};
-+
-+#endif
-+
-+static struct spi_board_info spi_board_info[] = {
-+
-+#if defined(CONFIG_SPI_COLDFIRE_SSI_AUDIO)
-+	{
-+		.modalias = "ssi_audio",
-+		.max_speed_hz = 300000,
-+		.bus_num = 1,
-+		.chip_select = 5,
-+		.irq = M5445x_AUDIO_IRQ_VECTOR,
-+		.platform_data = NULL,
-+		.controller_data = &ssi_audio_chip_info
-+	}
-+#endif
-+
-+};
-+
-+static struct coldfire_spi_master coldfire_master_info = {
-+	.bus_num = 1,
-+	.num_chipselect = SPI_NUM_CHIPSELECTS,
-+	.irq_source = MCF5445x_DSPI_IRQ_SOURCE,
-+	.irq_vector = MCF5445x_DSPI_IRQ_VECTOR,
-+	.irq_mask = (0x01 << MCF5445x_DSPI_IRQ_SOURCE),
-+	.irq_lp = 0x2,  /* Level */
-+	.par_val = SPI_PAR_VAL,
-+//	.par_val16 = SPI_PAR_VAL,
-+	.cs_control = coldfire_qspi_cs_control,
-+};
-+
-+static struct resource coldfire_spi_resources[] = {
-+	[0] = {
-+		.name = "qspi-par",
-+		.start = MCF5445x_DSPI_PAR,
-+		.end = MCF5445x_DSPI_PAR,
-+		.flags = IORESOURCE_MEM
-+	},
-+
-+	[1] = {
-+		.name = "qspi-module",
-+		.start = MCF5445x_DSPI_MCR,
-+		.end = MCF5445x_DSPI_MCR + 0xB8,
-+		.flags = IORESOURCE_MEM
-+	},
-+
-+	[2] = {
-+		.name = "qspi-int-level",
-+		.start = MCF5445x_INTC0_ICR + MCF5445x_DSPI_IRQ_SOURCE,
-+		.end = MCF5445x_INTC0_ICR + MCF5445x_DSPI_IRQ_SOURCE,
-+		.flags = IORESOURCE_MEM
-+	},
-+
-+	[3] = {
-+		.name = "qspi-int-mask",
-+		.start = MCF5445x_INTC0_IMRL,
-+		.end = MCF5445x_INTC0_IMRL,
-+		.flags = IORESOURCE_MEM
-+	}
-+};
-+
-+static struct platform_device coldfire_spi = {
-+	.name = "spi_coldfire", //"coldfire-qspi",
-+	.id = -1,
-+	.resource = coldfire_spi_resources,
-+	.num_resources = ARRAY_SIZE(coldfire_spi_resources),
-+	.dev = {
-+		.platform_data = &coldfire_master_info,
-+	}
-+};
-+
-+static int __init spi_dev_init(void)
-+{
-+	int retval = 0;
-+	
-+	retval = platform_device_register(&coldfire_spi);
-+
-+	if (retval < 0) {
-+		printk(KERN_ERR "SPI-m5445x: platform_device_register failed with code=%d\n", retval);
-+		goto out;
-+	}
-+
-+	if (ARRAY_SIZE(spi_board_info))
-+		retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-+
-+
-+out:
-+	return retval;
-+}
-+
-+arch_initcall(spi_dev_init);
---- /dev/null
-+++ b/drivers/spi/ssi_audio.c
-@@ -0,0 +1,921 @@
-+/*
-+ * MCF5445x audio driver.
-+ *
-+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
-+ * Copyright Freescale Semiconductor, Inc. 2006, 2007
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/spi/spi.h>
-+#include <linux/fs.h>
-+#include <linux/kernel.h>
-+#include <linux/major.h>
-+#include <asm/mcfsim.h>
-+#include <linux/interrupt.h>
-+#include <linux/soundcard.h>
-+#include <asm/uaccess.h>
-+#include <asm/virtconvert.h>
-+
-+#include <asm/coldfire.h>
-+#include <asm/coldfire_edma.h>
-+#ifdef CONFIG_M5445X
-+#include <asm/mcf5445x_ssi.h>
-+#include <asm/mcf5445x_ccm.h>
-+#include <asm/mcf5445x_gpio.h>
-+#endif
-+
-+#define SOUND_DEVICE_NAME "sound"
-+#define DRIVER_NAME "ssi_audio"
-+
-+/* #define AUDIO_DEBUG */
-+
-+#ifdef CONFIG_MMU
-+#define USE_MMU
-+#endif
-+
-+#define MAX_SPEED_HZ 12000000
-+
-+#define M5445x_AUDIO_IRQ_SOURCE 49
-+#define M5445x_AUDIO_IRQ_VECTOR (128+M5445x_AUDIO_IRQ_SOURCE)
-+#define M5445x_AUDIO_IRQ_LEVEL	5
-+
-+/* TLV320DAC23 audio chip registers */
-+
-+#define CODEC_LEFT_IN_REG		(0x00)
-+#define CODEC_RIGHT_IN_REG		(0x01)
-+#define CODEC_LEFT_HP_VOL_REG		(0x02)
-+#define CODEC_RIGHT_HP_VOL_REG		(0x03)
-+#define CODEC_ANALOG_APATH_REG		(0x04)
-+#define CODEC_DIGITAL_APATH_REG		(0x05)
-+#define CODEC_POWER_DOWN_REG		(0x06)
-+#define CODEC_DIGITAL_IF_FMT_REG	(0x07)
-+#define CODEC_SAMPLE_RATE_REG		(0x08)
-+#define CODEC_DIGITAL_IF_ACT_REG	(0x09)
-+#define CODEC_RESET_REG			(0x0f)
-+
-+#define CODEC_SAMPLE_8KHZ		(0x0C)
-+#define CODEC_SAMPLE_16KHZ		(0x58)
-+#define CODEC_SAMPLE_22KHZ		(0x62)
-+#define CODEC_SAMPLE_32KHZ		(0x18)
-+#define CODEC_SAMPLE_44KHZ		(0x22)
-+#define CODEC_SAMPLE_48KHZ		(0x00)
-+
-+/* Audio buffer data size */
-+#define	BUFSIZE		(64*1024)
-+/* DMA transfer size */
-+#define DMASIZE		(16*1024)
-+
-+/* eDMA channel for SSI channel 0 TX */
-+#define DMA_TCD 	MCF_EDMA_CHAN_TIMER2
-+/* eDMA channel for SSI channel 1 TX */
-+#define DMA_TCD2 	MCF_EDMA_CHAN_TIMER3
-+
-+struct ssi_audio {
-+	struct spi_device *spi;
-+	u32 speed;
-+	u32 stereo;
-+	u32 bits;
-+	u32 format;
-+	u8 isopen;
-+	u8 dmaing;
-+	u8 ssi_enabled;
-+	u8 channel;
-+	spinlock_t lock;
-+	u8* audio_buf;
-+};
-+
-+static struct ssi_audio* audio_device = NULL;
-+volatile u32 audio_start;
-+volatile u32 audio_count;
-+volatile u32 audio_append;
-+volatile u32 audio_appstart;
-+volatile u32 audio_txbusy;
-+
-+struct ssi_audio_format {
-+	unsigned int	format;
-+	unsigned int	bits;
-+} ssi_audio_formattable[] = {
-+	{ AFMT_MU_LAW,		8 },
-+	{ AFMT_A_LAW,		8 },
-+	{ AFMT_IMA_ADPCM,	8 },
-+	{ AFMT_U8,		8 },
-+	{ AFMT_S16_LE,		16 },
-+	{ AFMT_S16_BE,		16 },
-+	{ AFMT_S8,		8 },
-+	{ AFMT_U16_LE,		16 },
-+	{ AFMT_U16_BE,		16 },
-+};
-+
-+#define	FORMATSIZE	(sizeof(ssi_audio_formattable) / sizeof(struct ssi_audio_format))
-+
-+static void ssi_audio_setsamplesize(int val)
-+{
-+	int	i;
-+
-+	if (audio_device == NULL) return;
-+
-+	for (i = 0; (i < FORMATSIZE); i++) {
-+		if (ssi_audio_formattable[i].format == val) {
-+			audio_device->format = ssi_audio_formattable[i].format;
-+			audio_device->bits = ssi_audio_formattable[i].bits;
-+			break;
-+		}
-+	}
-+
-+#ifdef AUDIO_DEBUG
-+	printk(DRIVER_NAME ":ssi_audio_setsamplesize %d %d\n",
-+	       audio_device->format, audio_device->bits);
-+#endif
-+}
-+
-+static void ssi_audio_txdrain(void)
-+{
-+#ifdef AUDIO_DEBUG
-+	printk(DRIVER_NAME ":ssi_audio_txdrain()\n");
-+#endif
-+
-+	if (audio_device == NULL) return;
-+
-+	while (!signal_pending(current)) {
-+		if (audio_txbusy == 0)
-+			break;
-+		current->state = TASK_INTERRUPTIBLE;
-+		schedule_timeout(1);
-+	}
-+}
-+
-+#ifdef CONFIG_SSIAUDIO_USE_EDMA
-+/*
-+ *	Configure and start DMA engine.
-+ */
-+void __inline__ ssi_audio_dmarun(void)
-+{
-+	set_edma_params(DMA_TCD,
-+#ifdef USE_MMU
-+			virt_to_phys(&(audio_device->audio_buf[audio_start])),
-+#else
-+			(u32)&(audio_device->audio_buf[audio_start]),
-+#endif
-+			(u32)&MCF_SSI_TX0,
-+			MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
-+			8,
-+			4,
-+			0,
-+			audio_count/8,
-+			audio_count/8,
-+			0,
-+			0,
-+			0, // major_int
-+			0  // disable_req
-+			);
-+
-+	set_edma_params(DMA_TCD2,
-+#ifdef USE_MMU
-+			virt_to_phys(&(audio_device->audio_buf[audio_start+4])),
-+#else
-+			(u32)&(audio_device->audio_buf[audio_start+4]),
-+#endif
-+			(u32)&MCF_SSI_TX1,
-+			MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
-+			8,
-+			4,
-+			0,
-+			audio_count/8,
-+			audio_count/8,
-+			0,
-+			0,
-+			1, // major_int
-+                    	0  // disable_req
-+			);
-+
-+	audio_device->dmaing = 1;
-+	audio_txbusy = 1;
-+
-+	start_edma_transfer(DMA_TCD);
-+	start_edma_transfer(DMA_TCD2);
-+}
-+
-+/**
-+ * ssi_audio_dmabuf - Start DMA'ing a new buffer of data if any available.
-+ */
-+static void ssi_audio_dmabuf(void)
-+{
-+#ifdef AUDIO_DEBUG
-+	printk(DRIVER_NAME ":ssi_audio_dmabuf(): append=%x start=%x\n",
-+	       audio_append, audio_appstart);
-+#endif
-+
-+	/* If already running then nothing to do... */
-+	if (audio_device->dmaing)
-+		return;
-+
-+	/* Set DMA buffer size */
-+	audio_count = (audio_append >= audio_appstart) ?
-+		(audio_append - audio_appstart) :
-+		(BUFSIZE - audio_appstart);
-+	if (audio_count > DMASIZE)
-+		audio_count = DMASIZE;
-+
-+	/* Adjust pointers and counters accordingly */
-+	audio_appstart += audio_count;
-+	if (audio_appstart >= BUFSIZE)
-+		audio_appstart = 0;
-+
-+	if (audio_count > 0)
-+		ssi_audio_dmarun();
-+	else {
-+		audio_txbusy = 0;
-+#ifdef AUDIO_DEBUG
-+		printk(DRIVER_NAME ":DMA buffer is empty!\n");
-+#endif
-+	}
-+}
-+
-+void __inline__ stop_dma(void)
-+{
-+	stop_edma_transfer(DMA_TCD);
-+	stop_edma_transfer(DMA_TCD2);
-+}
-+
-+static int ssi_audio_dma_handler_empty(int channel, void *dev_id)
-+{
-+	return IRQ_HANDLED;
-+}
-+
-+static int ssi_audio_dma_handler(int channel, void *dev_id)
-+{
-+#ifdef AUDIO_DEBUG
-+	printk(DRIVER_NAME ":ssi_audio_dma_handler(channel=%d)\n", channel);
-+#endif
-+
-+	/* Clear DMA interrupt */
-+	stop_dma();
-+
-+	audio_device->dmaing = 0;
-+
-+	/* Update data pointers and counts */
-+	audio_start += audio_count;
-+	if (audio_start >= BUFSIZE)
-+		audio_start = 0;
-+	audio_count = 0;
-+
-+	/* Start new DMA buffer if we can */
-+	ssi_audio_dmabuf();
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static void init_dma(void)
-+{
-+	/* SSI DMA Signals mapped to DMA request */
-+	MCF_CCM_MISCCR &= ~MCF_CCM_MISCCR_TIMDMA;
-+	init_edma();
-+}
-+
-+#endif	/* CONFIG_SSIAUDIO_USE_EDMA */
-+
-+/* Write CODEC register using SPI
-+ *   address - CODEC register address
-+ *   data - data to be written into register
-+ */
-+static int codec_write(u8 addr, u16 data)
-+{
-+	u16 spi_word;
-+
-+	if (audio_device==NULL || audio_device->spi==NULL)
-+		return -ENODEV;
-+
-+	spi_word = ((addr & 0x7F)<<9)|(data & 0x1FF);
-+	return spi_write(audio_device->spi, (const u8*)&spi_word,
-+			 sizeof(spi_word));
-+}
-+
-+static inline void enable_ssi(void)
-+{
-+	if (audio_device==NULL || audio_device->ssi_enabled) return;
-+	audio_device->ssi_enabled = 1;
-+	MCF_SSI_CR |= MCF_SSI_CR_SSI_EN;  /* enable SSI module */
-+	MCF_SSI_CR |= MCF_SSI_CR_TE;  	  /* enable tranmitter */
-+}
-+
-+static inline void disable_ssi(void)
-+{
-+	if (audio_device==NULL || audio_device->ssi_enabled==0) return;
-+	MCF_SSI_CR &= ~MCF_SSI_CR_TE;  		/* disable transmitter */
-+	MCF_SSI_CR &= ~MCF_SSI_CR_SSI_EN;	/* disable SSI module  */
-+	audio_device->ssi_enabled = 0;
-+}
-+
-+/* Audio CODEC initialization */
-+static void adjust_codec_speed(void) {
-+#ifdef AUDIO_DEBUG
-+	printk(DRIVER_NAME ":adjust_codec_speed: %d\n", audio_device->speed);
-+#endif
-+	disable_ssi();
-+	switch (audio_device->speed) {
-+	case 8000:
-+		MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(255);
-+		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_8KHZ);
-+		break;
-+	case 16000:
-+		MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(129);
-+		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_16KHZ);
-+		break;
-+	case 22000:
-+	case 22050:
-+		MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(94);
-+		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_22KHZ);
-+		break;
-+	case 44000:
-+	case 44100:
-+		MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(47);
-+		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_44KHZ);
-+		break;
-+	case 48000:
-+		MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(42);
-+		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_48KHZ);
-+		break;
-+	default:
-+		MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(47);
-+		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_44KHZ);
-+	}
-+}
-+
-+static void codec_reset(void)
-+{
-+	codec_write(CODEC_RESET_REG, 0); /* reset the audio chip */
-+	udelay(1500); /* wait for reset */
-+}
-+
-+static void init_audio_codec(void)
-+{
-+#ifdef AUDIO_DEBUG
-+	printk(DRIVER_NAME ":init_audio_codec()\n");
-+#endif
-+	codec_reset();
-+
-+	codec_write(CODEC_LEFT_IN_REG, 0x017);
-+	codec_write(CODEC_RIGHT_IN_REG, 0x017);
-+	codec_write(CODEC_POWER_DOWN_REG, 0x000); /* Turn off line input */
-+	codec_write(CODEC_DIGITAL_IF_FMT_REG, 0x00A); /* I2S slave mode */
-+	/* codec_write(CODEC_DIGITAL_IF_FMT_REG, 0x042); // I2S master mode */
-+	codec_write(CODEC_DIGITAL_APATH_REG, 0x007); /* Set A path */
-+
-+	/* set sample rate */
-+	adjust_codec_speed();
-+
-+	codec_write(CODEC_LEFT_HP_VOL_REG, 0x075); /* set volume */
-+	codec_write(CODEC_RIGHT_HP_VOL_REG, 0x075); /* set volume */
-+	codec_write(CODEC_DIGITAL_IF_ACT_REG, 1); /* Activate digital interface */
-+	codec_write(CODEC_ANALOG_APATH_REG, 0x0F2);
-+}
-+
-+
-+static void chip_init(void)
-+{
-+#ifdef CONFIG_SSIAUDIO_USE_EDMA
-+	init_dma();
-+#endif
-+
-+	/* Enable the SSI pins */
-+	MCF_GPIO_PAR_SSI = (0
-+			    | MCF_GPIO_PAR_SSI_MCLK
-+			    | MCF_GPIO_PAR_SSI_STXD(3)
-+			    | MCF_GPIO_PAR_SSI_SRXD(3)
-+			    | MCF_GPIO_PAR_SSI_FS(3)
-+			    | MCF_GPIO_PAR_SSI_BCLK(3) );
-+}
-+
-+static void init_ssi(void)
-+{
-+#ifdef AUDIO_DEBUG
-+	printk(DRIVER_NAME ":init_ssi()\n");
-+#endif
-+
-+	/* Dividers are for MCF54445 on 266Mhz, the output is 44.1Khz*/
-+	/* Enable SSI clock in CCM */
-+	MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(47);
-+
-+	/* Issue a SSI reset */
-+	MCF_SSI_CR &= ~MCF_SSI_CR_SSI_EN;  /* disable SSI module */
-+
-+	/* SSI module uses internal CPU clock */
-+	MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSISRC;
-+
-+	MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSIPUE;
-+	MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSIPUS_UP;
-+
-+	MCF_SSI_CR = 0
-+			| MCF_SSI_CR_CIS
-+			| MCF_SSI_CR_TCH    /* Enable two channel mode */
-+			| MCF_SSI_CR_MCE    /* Set clock out on SSI_MCLK pin */
-+			| MCF_SSI_CR_I2S_MASTER    /* Set I2S master mode */
-+			| MCF_SSI_CR_SYN      /* Enable synchronous mode */
-+			| MCF_SSI_CR_NET
-+			;
-+
-+	MCF_SSI_TCR = 0
-+			| MCF_SSI_TCR_TXDIR  /* internally generated bit clock */
-+			| MCF_SSI_TCR_TFDIR  /* internally generated frame sync */
-+			| MCF_SSI_TCR_TSCKP  /* Clock data on falling edge of bit clock */
-+			| MCF_SSI_TCR_TFSI   /* Frame sync active low */
-+			| MCF_SSI_TCR_TEFS   /* TX frame sync 1 bit before data */
-+			| MCF_SSI_TCR_TFEN0  /* TX FIFO 0 enabled */
-+			| MCF_SSI_TCR_TFEN1  /* TX FIFO 1 enabled */
-+			| MCF_SSI_TCR_TXBIT0
-+			;
-+
-+	MCF_SSI_CCR = MCF_SSI_CCR_WL(7)  /* 16 bit word length */
-+			| MCF_SSI_CCR_DC(1)  	 /* Frame rate divider */
-+			| MCF_SSI_CCR_PM(0)
-+			| MCF_SSI_CCR_DIV2
-+			;
-+
-+	MCF_SSI_FCSR = 0
-+			| MCF_SSI_FCSR_TFWM0(2)
-+			| MCF_SSI_FCSR_TFWM1(2)
-+			;
-+
-+	MCF_SSI_IER =   0 // interrupts
-+#ifndef CONFIG_SSIAUDIO_USE_EDMA
-+				| MCF_SSI_IER_TIE   /* transmit interrupts */
-+				| MCF_SSI_IER_TFE0  /* transmit FIFO 0 empty */
-+				| MCF_SSI_IER_TFE1  /* transmit FIFO 1 empty */
-+#else
-+				| MCF_SSI_IER_TDMAE /* DMA request enabled */
-+				| MCF_SSI_IER_TFE0  /* transmit FIFO 0 empty */
-+				| MCF_SSI_IER_TFE1  /* transmit FIFO 1 empty */
-+#endif
-+				;
-+
-+#ifndef CONFIG_SSIAUDIO_USE_EDMA
-+	/* enable IRQ:  SSI interrupt */
-+	MCF_INTC1_ICR(M5445x_AUDIO_IRQ_SOURCE) = M5445x_AUDIO_IRQ_LEVEL;
-+	MCF_INTC1_CIMR = M5445x_AUDIO_IRQ_SOURCE;
-+#endif
-+}
-+
-+#ifndef CONFIG_SSIAUDIO_USE_EDMA
-+/* interrupt for SSI */
-+static int ssi_audio_isr(int irq, void *dev_id)
-+{
-+	unsigned long	*bp;
-+
-+	if (audio_txbusy==0)
-+		return IRQ_HANDLED;
-+
-+	spin_lock(&(audio_device->lock));
-+
-+	if (audio_start == audio_append) {
-+		disable_ssi();
-+		audio_txbusy = 0;
-+	} else {
-+		if (MCF_SSI_ISR & (MCF_SSI_ISR_TFE0|MCF_SSI_ISR_TFE1)) {
-+			bp = (unsigned long *) &audio_device->audio_buf[audio_start];
-+			if (audio_device->channel) {
-+				MCF_SSI_TX1 = *bp;
-+				audio_device->channel = 0;
-+			} else {
-+				MCF_SSI_TX0 = *bp;
-+				audio_device->channel = 1;
-+			}
-+			audio_start += 4;
-+			if (audio_start >= BUFSIZE)
-+				audio_start = 0;
-+		}
-+	}
-+
-+	spin_unlock(&(audio_device->lock));
-+
-+	return IRQ_HANDLED;
-+}
-+#endif
-+
-+/* Set initial driver playback defaults. */
-+static void init_driver_variables(void)
-+{
-+	audio_device->speed = 44100;
-+	audio_device->format = AFMT_S16_LE;
-+	audio_device->bits = 16;
-+	audio_device->stereo = 1;
-+	audio_device->ssi_enabled = 0;
-+
-+	audio_start = 0;
-+	audio_count = 0;
-+	audio_append = 0;
-+	audio_appstart = 0;
-+	audio_txbusy = 0;
-+	audio_device->dmaing = 0;
-+}
-+
-+/* open audio device */
-+static int ssi_audio_open(struct inode *inode, struct file *filp)
-+{
-+#ifdef AUDIO_DEBUG
-+	printk(DRIVER_NAME ":ssi_audio_open()\n");
-+#endif
-+
-+	if (audio_device==NULL) return (-ENODEV);
-+
-+	if (audio_device->isopen)
-+		return(-EBUSY);
-+
-+	spin_lock(&(audio_device->lock));
-+
-+	audio_device->isopen = 1;
-+
-+	init_driver_variables();
-+	init_ssi();
-+	init_audio_codec();
-+
-+	spin_unlock(&(audio_device->lock));
-+
-+	udelay(100);
-+
-+	return 0;
-+}
-+
-+/* close audio device */
-+static int ssi_audio_close(struct inode *inode, struct file *filp)
-+{
-+#ifdef AUDIO_DEBUG
-+	printk(DRIVER_NAME ":ssi_audio_close()\n");
-+#endif
-+
-+	if (audio_device==NULL) return (-ENODEV);
-+
-+	ssi_audio_txdrain();
-+
-+	spin_lock(&(audio_device->lock));
-+
-+#ifdef CONFIG_SSIAUDIO_USE_EDMA
-+	stop_dma();
-+#endif
-+	disable_ssi();
-+	codec_reset();
-+	init_driver_variables();
-+	audio_device->isopen = 0;
-+
-+	spin_unlock(&(audio_device->lock));
-+	return 0;
-+}
-+
-+/* write to audio device */
-+static ssize_t ssi_audio_write(struct file *filp, const char *buf,
-+	size_t count, loff_t *ppos)
-+{
-+	unsigned long	*dp, *buflp;
-+	unsigned short	*bufwp;
-+	unsigned char	*bufbp;
-+	unsigned int	slen, bufcnt, i, s, e;
-+
-+#ifdef AUDIO_DEBUG
-+	printk(DRIVER_NAME ":ssi_audio_write(buf=%x,count=%d)\n",
-+	       (int)buf, count);
-+#endif
-+
-+	if (audio_device==NULL)
-+		return (-ENODEV);
-+
-+	if (count <= 0)
-+		return 0;
-+
-+	spin_lock(&(audio_device->lock));
-+
-+	buflp = (unsigned long *) buf;
-+	bufwp = (unsigned short *) buf;
-+	bufbp = (unsigned char *) buf;
-+
-+	bufcnt = count & ~0x3;
-+
-+	bufcnt <<= 1;
-+	if (audio_device->stereo == 0)
-+		bufcnt <<= 1;
-+	if (audio_device->bits == 8)
-+		bufcnt <<= 1;
-+
-+tryagain:
-+	/*
-+	 * Get a snapshot of buffer, so we can figure out how
-+	 * much data we can fit in...
-+	 */
-+	s = audio_start;
-+	e = audio_append;
-+	dp = (unsigned long *) &(audio_device->audio_buf[e]);
-+
-+	slen = ((s > e) ? (s - e) : (BUFSIZE - (e - s))) - 4;
-+	if (slen > bufcnt)
-+		slen = bufcnt;
-+	if ((BUFSIZE - e) < slen)
-+		slen = BUFSIZE - e;
-+
-+	if (slen == 0) {
-+		if (signal_pending(current))
-+			return(-ERESTARTSYS);
-+		set_current_state(TASK_INTERRUPTIBLE);
-+		schedule_timeout(1);
-+		goto tryagain;
-+	}
-+
-+	/*
-+	 * For DMA we need to have data as 32 bit
-+	 * values (since SSI TX register is 32 bit).
-+	 * So, the incoming 16 bit data must be put to buffer as 32 bit values.
-+	 * Also, the endianess is converted if needed
-+	 */
-+	if (audio_device->stereo) {
-+		if (audio_device->bits == 16) {
-+			if (audio_device->format==AFMT_S16_LE) {
-+				/*- convert endianess, probably could be done by SSI also */
-+				for (i = 0; (i < slen); i += 4) {
-+					unsigned short val = le16_to_cpu((*bufwp++));
-+					*dp++ = val;
-+				}
-+			} else {
-+				for (i = 0; (i < slen); i += 4) {
-+					*dp++ = *bufwp++;
-+				}
-+			}
-+		} else {
-+			for (i = 0; (i < slen); i += 4) {
-+				*dp    = (((unsigned long) *bufbp++) << 24);
-+				*dp++ |= (((unsigned long) *bufbp++) << 8);
-+			}
-+		}
-+	} else {
-+		if (audio_device->bits == 16) {
-+			for (i = 0; (i < slen); i += 4) {
-+				*dp++ = (((unsigned long)*bufwp)<<16) | *bufwp;
-+				bufwp++;
-+			}
-+		} else {
-+			for (i = 0; (i < slen); i += 4) {
-+				*dp++ = (((unsigned long) *bufbp) << 24) |
-+					(((unsigned long) *bufbp) << 8);
-+				bufbp++;
-+			}
-+		}
-+	}
-+
-+	e += slen;
-+	if (e >= BUFSIZE)
-+		e = 0;
-+	audio_append = e;
-+
-+	/* If not outputing audio, then start now */
-+	if (audio_txbusy == 0) {
-+		audio_txbusy++;
-+		audio_device->channel = 0;
-+		enable_ssi();
-+#ifdef CONFIG_SSIAUDIO_USE_EDMA
-+		ssi_audio_dmabuf(); /* start first DMA transfer */
-+#endif
-+	}
-+
-+	bufcnt -= slen;
-+
-+	if (bufcnt > 0)
-+		goto tryagain;
-+
-+	spin_unlock(&(audio_device->lock));
-+
-+	return count;
-+}
-+
-+/* ioctl: control the driver */
-+static int ssi_audio_ioctl(struct inode *inode, struct file *filp,
-+	unsigned int cmd, unsigned long arg)
-+{
-+	long val;
-+	int rc = 0;
-+
-+#ifdef AUDIO_DEBUG
-+    printk(DRIVER_NAME ":ssi_audio_ioctl(cmd=%x,arg=%x)\n",
-+	   (int)cmd, (int)arg);
-+#endif
-+
-+	if (audio_device==NULL)
-+		return (-ENODEV);
-+
-+	switch (cmd) {
-+
-+	case SNDCTL_DSP_SPEED:
-+		if (access_ok(VERIFY_READ, (void *) arg, sizeof(val))) {
-+			get_user(val, (unsigned long *) arg);
-+#ifdef AUDIO_DEBUG
-+			printk(DRIVER_NAME ":ssi_audio_ioctl: SNDCTL_DSP_SPEED: %ld\n", val);
-+#endif
-+			ssi_audio_txdrain();
-+			audio_device->speed = val;
-+			init_audio_codec();
-+		} else {
-+			rc = -EINVAL;
-+		}
-+		break;
-+
-+	case SNDCTL_DSP_SAMPLESIZE:
-+		if (access_ok(VERIFY_READ, (void *) arg, sizeof(val))) {
-+			get_user(val, (unsigned long *) arg);
-+#ifdef AUDIO_DEBUG
-+			printk(DRIVER_NAME ":ssi_audio_ioctl: SNDCTL_DSP_SAMPLESIZE: %d\n", val);
-+#endif
-+			ssi_audio_txdrain();
-+			ssi_audio_setsamplesize(val);
-+		} else {
-+			rc = -EINVAL;
-+		}
-+		break;
-+
-+	case SNDCTL_DSP_STEREO:
-+		if (access_ok(VERIFY_READ, (void *) arg, sizeof(val))) {
-+			get_user(val, (unsigned long *) arg);
-+			ssi_audio_txdrain();
-+			audio_device->stereo = val;
-+		} else {
-+			rc = -EINVAL;
-+		}
-+		break;
-+
-+	case SNDCTL_DSP_GETBLKSIZE:
-+		if (access_ok(VERIFY_WRITE, (void *) arg, sizeof(long)))
-+			put_user(BUFSIZE, (long *) arg);
-+		else
-+			rc = -EINVAL;
-+		break;
-+
-+	case SNDCTL_DSP_SYNC:
-+		ssi_audio_txdrain();
-+		break;
-+
-+	default:
-+		rc = -EINVAL;
-+		break;
-+	}
-+
-+	return rc;
-+}
-+
-+struct file_operations	ssi_audio_fops = {
-+	open: ssi_audio_open,		/* open */
-+	release: ssi_audio_close,	/* close */
-+	write: ssi_audio_write,		/* write */
-+	ioctl: ssi_audio_ioctl,		/* ioctl */
-+};
-+
-+/* initialize audio driver */
-+static int __devinit ssi_audio_probe(struct spi_device *spi)
-+{
-+	struct ssi_audio *audio;
-+	int err;
-+
-+#ifdef AUDIO_DEBUG
-+	printk(DRIVER_NAME": probe\n");
-+#endif
-+
-+	if (!spi->irq) {
-+		dev_dbg(&spi->dev, "no IRQ?\n");
-+		return -ENODEV;
-+	}
-+
-+	/* don't exceed max specified sample rate */
-+	if (spi->max_speed_hz > MAX_SPEED_HZ) {
-+		dev_dbg(&spi->dev, "f(sample) %d KHz?\n",
-+				(spi->max_speed_hz)/1000);
-+		return -EINVAL;
-+	}
-+
-+	/* register charcter device */
-+	if (register_chrdev(SOUND_MAJOR, SOUND_DEVICE_NAME, &ssi_audio_fops) < 0) {
-+		printk(KERN_WARNING DRIVER_NAME ": failed to register major %d\n", SOUND_MAJOR);
-+		dev_dbg(&spi->dev, DRIVER_NAME ": failed to register major %d\n", SOUND_MAJOR);
-+		return -ENODEV;
-+	}
-+
-+	audio = kzalloc(sizeof(struct ssi_audio), GFP_KERNEL);
-+	if (!audio) {
-+		err = -ENOMEM;
-+		goto err_out;
-+	}
-+
-+	/* DMA buffer must be from GFP_DMA zone, so it will not be cached */
-+	audio->audio_buf = kmalloc(BUFSIZE, GFP_DMA);
-+	if (audio->audio_buf == NULL) {
-+		dev_dbg(&spi->dev, DRIVER_NAME ": failed to allocate DMA[%d] buffer\n", BUFSIZE);
-+		err = -ENOMEM;
-+		goto err_free_mem;
-+	}
-+
-+	audio_device = audio;
-+
-+	dev_set_drvdata(&spi->dev, audio);
-+	spi->dev.power.power_state = PMSG_ON;
-+
-+	audio->spi = spi;
-+
-+#ifndef CONFIG_SSIAUDIO_USE_EDMA
-+	if (request_irq(spi->irq, ssi_audio_isr, IRQF_DISABLED,	spi->dev.bus_id, audio)) {
-+		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
-+		err = -EBUSY;
-+		goto err_free_mem;
-+	}
-+
-+#else
-+	/* request 2 eDMA channels since two channel output mode is used */
-+	if (request_edma_channel(DMA_TCD,
-+				 ssi_audio_dma_handler_empty,
-+				 NULL,
-+				 audio,
-+				 &(audio_device->lock),
-+				 DRIVER_NAME)!=0) {
-+		dev_dbg(&spi->dev, "DMA channel %d busy?\n", DMA_TCD);
-+		err = -EBUSY;
-+		goto err_free_mem;
-+	}
-+	if (request_edma_channel(DMA_TCD2,
-+				 ssi_audio_dma_handler,
-+				 NULL,
-+				 audio,
-+				 &(audio_device->lock),
-+				 DRIVER_NAME)!=0) {
-+		dev_dbg(&spi->dev, "DMA channel %d busy?\n", DMA_TCD2);
-+		err = -EBUSY;
-+		goto err_free_mem;
-+	}
-+
-+#endif
-+	chip_init();
-+	printk(DRIVER_NAME ": Probed successfully\n");
-+
-+	return 0;
-+
-+ err_free_mem:
-+ 	kfree(audio);
-+	audio_device = NULL;
-+ err_out:
-+ 	unregister_chrdev(SOUND_MAJOR, SOUND_DEVICE_NAME);
-+	return err;
-+}
-+
-+static int __devexit ssi_audio_remove(struct spi_device *spi)
-+{
-+	struct ssi_audio *audio = dev_get_drvdata(&spi->dev);
-+
-+	ssi_audio_txdrain();
-+#ifndef CONFIG_SSIAUDIO_USE_EDMA
-+	free_irq(spi->irq, audio);
-+#else
-+	free_edma_channel(DMA_TCD, audio);
-+	free_edma_channel(DMA_TCD2, audio);
-+#endif
-+	kfree(audio->audio_buf);
-+	kfree(audio);
-+	audio_device = NULL;
-+	unregister_chrdev(SOUND_MAJOR, SOUND_DEVICE_NAME);
-+	dev_dbg(&spi->dev, "unregistered audio\n");
-+	return 0;
-+}
-+
-+static int ssi_audio_suspend(struct spi_device *spi, pm_message_t message)
-+{
-+	return 0;
-+}
-+
-+static int ssi_audio_resume(struct spi_device *spi)
-+{
-+	return 0;
-+}
-+
-+static struct spi_driver ssi_audio_driver = {
-+	.driver = {
-+		.name	= DRIVER_NAME,
-+		.bus	= &spi_bus_type,
-+		.owner	= THIS_MODULE,
-+	},
-+	.probe		= ssi_audio_probe,
-+	.remove		= __devexit_p(ssi_audio_remove),
-+	.suspend	= ssi_audio_suspend,
-+	.resume		= ssi_audio_resume,
-+};
-+
-+static int __init ssi_audio_init(void)
-+{
-+	return spi_register_driver(&ssi_audio_driver);
-+}
-+module_init(ssi_audio_init);
-+
-+static void __exit ssi_audio_exit(void)
-+{
-+	spi_unregister_driver(&ssi_audio_driver);
-+}
-+module_exit(ssi_audio_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-+MODULE_DESCRIPTION("SSI/I2S Audio Driver");
---- a/drivers/usb/gadget/ether.c
-+++ b/drivers/usb/gadget/ether.c
-@@ -287,6 +287,9 @@ MODULE_PARM_DESC(host_addr, "Host Ethern
- #define	DEV_CONFIG_CDC
- #endif
- 
-+#ifdef CONFIG_USB_GADGET_MCF5445X
-+#define DEV_CONFIG_CDC
-+#endif
- 
- /*-------------------------------------------------------------------------*/
- 
---- a/drivers/usb/gadget/fsl_usb2_udc.h
-+++ b/drivers/usb/gadget/fsl_usb2_udc.h
-@@ -83,16 +83,6 @@ struct usb_dr_host {
- 	u32 endptctrl[6];	/* Endpoint Control Registers */
- };
- 
-- /* non-EHCI USB system interface registers (Big Endian) */
--struct usb_sys_interface {
--	u32 snoop1;
--	u32 snoop2;
--	u32 age_cnt_thresh;	/* Age Count Threshold Register */
--	u32 pri_ctrl;		/* Priority Control Register */
--	u32 si_ctrl;		/* System Interface Control Register */
--	u8 res[236];
--	u32 control;		/* General Purpose Control Register */
--};
- 
- /* ep0 transfer state */
- #define WAIT_FOR_SETUP          0
-@@ -101,10 +91,6 @@ struct usb_sys_interface {
- #define WAIT_FOR_OUT_STATUS     3
- #define DATA_STATE_RECV         4
- 
--/* Device Controller Capability Parameter register */
--#define DCCPARAMS_DC				0x00000080
--#define DCCPARAMS_DEN_MASK			0x0000001f
--
- /* Frame Index Register Bit Masks */
- #define	USB_FRINDEX_MASKS			0x3fff
- /* USB CMD  Register Bit Masks */
-@@ -180,172 +166,6 @@ struct usb_sys_interface {
- /* endpoint list address bit masks */
- #define USB_EP_LIST_ADDRESS_MASK              0xfffff800
- 
--/* PORTSCX  Register Bit Masks */
--#define  PORTSCX_CURRENT_CONNECT_STATUS       0x00000001
--#define  PORTSCX_CONNECT_STATUS_CHANGE        0x00000002
--#define  PORTSCX_PORT_ENABLE                  0x00000004
--#define  PORTSCX_PORT_EN_DIS_CHANGE           0x00000008
--#define  PORTSCX_OVER_CURRENT_ACT             0x00000010
--#define  PORTSCX_OVER_CURRENT_CHG             0x00000020
--#define  PORTSCX_PORT_FORCE_RESUME            0x00000040
--#define  PORTSCX_PORT_SUSPEND                 0x00000080
--#define  PORTSCX_PORT_RESET                   0x00000100
--#define  PORTSCX_LINE_STATUS_BITS             0x00000C00
--#define  PORTSCX_PORT_POWER                   0x00001000
--#define  PORTSCX_PORT_INDICTOR_CTRL           0x0000C000
--#define  PORTSCX_PORT_TEST_CTRL               0x000F0000
--#define  PORTSCX_WAKE_ON_CONNECT_EN           0x00100000
--#define  PORTSCX_WAKE_ON_CONNECT_DIS          0x00200000
--#define  PORTSCX_WAKE_ON_OVER_CURRENT         0x00400000
--#define  PORTSCX_PHY_LOW_POWER_SPD            0x00800000
--#define  PORTSCX_PORT_FORCE_FULL_SPEED        0x01000000
--#define  PORTSCX_PORT_SPEED_MASK              0x0C000000
--#define  PORTSCX_PORT_WIDTH                   0x10000000
--#define  PORTSCX_PHY_TYPE_SEL                 0xC0000000
--
--/* bit 11-10 are line status */
--#define  PORTSCX_LINE_STATUS_SE0              0x00000000
--#define  PORTSCX_LINE_STATUS_JSTATE           0x00000400
--#define  PORTSCX_LINE_STATUS_KSTATE           0x00000800
--#define  PORTSCX_LINE_STATUS_UNDEF            0x00000C00
--#define  PORTSCX_LINE_STATUS_BIT_POS          10
--
--/* bit 15-14 are port indicator control */
--#define  PORTSCX_PIC_OFF                      0x00000000
--#define  PORTSCX_PIC_AMBER                    0x00004000
--#define  PORTSCX_PIC_GREEN                    0x00008000
--#define  PORTSCX_PIC_UNDEF                    0x0000C000
--#define  PORTSCX_PIC_BIT_POS                  14
--
--/* bit 19-16 are port test control */
--#define  PORTSCX_PTC_DISABLE                  0x00000000
--#define  PORTSCX_PTC_JSTATE                   0x00010000
--#define  PORTSCX_PTC_KSTATE                   0x00020000
--#define  PORTSCX_PTC_SEQNAK                   0x00030000
--#define  PORTSCX_PTC_PACKET                   0x00040000
--#define  PORTSCX_PTC_FORCE_EN                 0x00050000
--#define  PORTSCX_PTC_BIT_POS                  16
--
--/* bit 27-26 are port speed */
--#define  PORTSCX_PORT_SPEED_FULL              0x00000000
--#define  PORTSCX_PORT_SPEED_LOW               0x04000000
--#define  PORTSCX_PORT_SPEED_HIGH              0x08000000
--#define  PORTSCX_PORT_SPEED_UNDEF             0x0C000000
--#define  PORTSCX_SPEED_BIT_POS                26
--
--/* bit 28 is parallel transceiver width for UTMI interface */
--#define  PORTSCX_PTW                          0x10000000
--#define  PORTSCX_PTW_8BIT                     0x00000000
--#define  PORTSCX_PTW_16BIT                    0x10000000
--
--/* bit 31-30 are port transceiver select */
--#define  PORTSCX_PTS_UTMI                     0x00000000
--#define  PORTSCX_PTS_ULPI                     0x80000000
--#define  PORTSCX_PTS_FSLS                     0xC0000000
--#define  PORTSCX_PTS_BIT_POS                  30
--
--/* otgsc Register Bit Masks */
--#define  OTGSC_CTRL_VUSB_DISCHARGE            0x00000001
--#define  OTGSC_CTRL_VUSB_CHARGE               0x00000002
--#define  OTGSC_CTRL_OTG_TERM                  0x00000008
--#define  OTGSC_CTRL_DATA_PULSING              0x00000010
--#define  OTGSC_STS_USB_ID                     0x00000100
--#define  OTGSC_STS_A_VBUS_VALID               0x00000200
--#define  OTGSC_STS_A_SESSION_VALID            0x00000400
--#define  OTGSC_STS_B_SESSION_VALID            0x00000800
--#define  OTGSC_STS_B_SESSION_END              0x00001000
--#define  OTGSC_STS_1MS_TOGGLE                 0x00002000
--#define  OTGSC_STS_DATA_PULSING               0x00004000
--#define  OTGSC_INTSTS_USB_ID                  0x00010000
--#define  OTGSC_INTSTS_A_VBUS_VALID            0x00020000
--#define  OTGSC_INTSTS_A_SESSION_VALID         0x00040000
--#define  OTGSC_INTSTS_B_SESSION_VALID         0x00080000
--#define  OTGSC_INTSTS_B_SESSION_END           0x00100000
--#define  OTGSC_INTSTS_1MS                     0x00200000
--#define  OTGSC_INTSTS_DATA_PULSING            0x00400000
--#define  OTGSC_INTR_USB_ID                    0x01000000
--#define  OTGSC_INTR_A_VBUS_VALID              0x02000000
--#define  OTGSC_INTR_A_SESSION_VALID           0x04000000
--#define  OTGSC_INTR_B_SESSION_VALID           0x08000000
--#define  OTGSC_INTR_B_SESSION_END             0x10000000
--#define  OTGSC_INTR_1MS_TIMER                 0x20000000
--#define  OTGSC_INTR_DATA_PULSING              0x40000000
--
--/* USB MODE Register Bit Masks */
--#define  USB_MODE_CTRL_MODE_IDLE              0x00000000
--#define  USB_MODE_CTRL_MODE_DEVICE            0x00000002
--#define  USB_MODE_CTRL_MODE_HOST              0x00000003
--#define  USB_MODE_CTRL_MODE_RSV               0x00000001
--#define  USB_MODE_SETUP_LOCK_OFF              0x00000008
--#define  USB_MODE_STREAM_DISABLE              0x00000010
--/* Endpoint Flush Register */
--#define EPFLUSH_TX_OFFSET		      0x00010000
--#define EPFLUSH_RX_OFFSET		      0x00000000
--
--/* Endpoint Setup Status bit masks */
--#define  EP_SETUP_STATUS_MASK                 0x0000003F
--#define  EP_SETUP_STATUS_EP0		      0x00000001
--
--/* ENDPOINTCTRLx  Register Bit Masks */
--#define  EPCTRL_TX_ENABLE                     0x00800000
--#define  EPCTRL_TX_DATA_TOGGLE_RST            0x00400000	/* Not EP0 */
--#define  EPCTRL_TX_DATA_TOGGLE_INH            0x00200000	/* Not EP0 */
--#define  EPCTRL_TX_TYPE                       0x000C0000
--#define  EPCTRL_TX_DATA_SOURCE                0x00020000	/* Not EP0 */
--#define  EPCTRL_TX_EP_STALL                   0x00010000
--#define  EPCTRL_RX_ENABLE                     0x00000080
--#define  EPCTRL_RX_DATA_TOGGLE_RST            0x00000040	/* Not EP0 */
--#define  EPCTRL_RX_DATA_TOGGLE_INH            0x00000020	/* Not EP0 */
--#define  EPCTRL_RX_TYPE                       0x0000000C
--#define  EPCTRL_RX_DATA_SINK                  0x00000002	/* Not EP0 */
--#define  EPCTRL_RX_EP_STALL                   0x00000001
--
--/* bit 19-18 and 3-2 are endpoint type */
--#define  EPCTRL_EP_TYPE_CONTROL               0
--#define  EPCTRL_EP_TYPE_ISO                   1
--#define  EPCTRL_EP_TYPE_BULK                  2
--#define  EPCTRL_EP_TYPE_INTERRUPT             3
--#define  EPCTRL_TX_EP_TYPE_SHIFT              18
--#define  EPCTRL_RX_EP_TYPE_SHIFT              2
--
--/* SNOOPn Register Bit Masks */
--#define  SNOOP_ADDRESS_MASK                   0xFFFFF000
--#define  SNOOP_SIZE_ZERO                      0x00	/* snooping disable */
--#define  SNOOP_SIZE_4KB                       0x0B	/* 4KB snoop size */
--#define  SNOOP_SIZE_8KB                       0x0C
--#define  SNOOP_SIZE_16KB                      0x0D
--#define  SNOOP_SIZE_32KB                      0x0E
--#define  SNOOP_SIZE_64KB                      0x0F
--#define  SNOOP_SIZE_128KB                     0x10
--#define  SNOOP_SIZE_256KB                     0x11
--#define  SNOOP_SIZE_512KB                     0x12
--#define  SNOOP_SIZE_1MB                       0x13
--#define  SNOOP_SIZE_2MB                       0x14
--#define  SNOOP_SIZE_4MB                       0x15
--#define  SNOOP_SIZE_8MB                       0x16
--#define  SNOOP_SIZE_16MB                      0x17
--#define  SNOOP_SIZE_32MB                      0x18
--#define  SNOOP_SIZE_64MB                      0x19
--#define  SNOOP_SIZE_128MB                     0x1A
--#define  SNOOP_SIZE_256MB                     0x1B
--#define  SNOOP_SIZE_512MB                     0x1C
--#define  SNOOP_SIZE_1GB                       0x1D
--#define  SNOOP_SIZE_2GB                       0x1E	/* 2GB snoop size */
--
--/* pri_ctrl Register Bit Masks */
--#define  PRI_CTRL_PRI_LVL1                    0x0000000C
--#define  PRI_CTRL_PRI_LVL0                    0x00000003
--
--/* si_ctrl Register Bit Masks */
--#define  SI_CTRL_ERR_DISABLE                  0x00000010
--#define  SI_CTRL_IDRC_DISABLE                 0x00000008
--#define  SI_CTRL_RD_SAFE_EN                   0x00000004
--#define  SI_CTRL_RD_PREFETCH_DISABLE          0x00000002
--#define  SI_CTRL_RD_PREFEFETCH_VAL            0x00000001
--
--/* control Register Bit Masks */
--#define  USB_CTRL_IOENB                       0x00000004
--#define  USB_CTRL_ULPI_INT0EN                 0x00000001
- 
- /* Endpoint Queue Head data struct
-  * Rem: all the variables of qh are LittleEndian Mode
-@@ -477,7 +297,10 @@ struct fsl_udc {
- 	unsigned int irq;
- 
- 	struct usb_ctrlrequest local_setup_buff;
--	spinlock_t lock;
-+	spinlock_t lock;		/* udc lock */
-+	struct fsl_usb2_platform_data *pdata;
-+	u32 xcvr_type;
-+
- 	struct otg_transceiver *transceiver;
- 	unsigned softconnect:1;
- 	unsigned vbus_active:1;
-@@ -514,7 +337,7 @@ struct fsl_udc {
- #define DBG(fmt, args...) 	printk(KERN_DEBUG "[%s]  " fmt "\n", \
- 				__FUNCTION__, ## args)
- #else
--#define DBG(fmt, args...)	do{}while(0)
-+#define DBG(fmt, args...)	do {} while (0)
- #endif
- 
- #if 0
-@@ -548,7 +371,7 @@ static void dump_msg(const char *label, 
- #ifdef VERBOSE
- #define VDBG		DBG
- #else
--#define VDBG(stuff...)	do{}while(0)
-+#define VDBG(stuff...)	do {} while (0)
- #endif
- 
- #define ERR(stuff...)		pr_err("udc: " stuff)
-@@ -573,11 +396,14 @@ static void dump_msg(const char *label, 
- #define ep_maxpacket(EP)	((EP)->ep.maxpacket)
- #define ep_is_in(EP)	( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
- 			USB_DIR_IN ):((EP)->desc->bEndpointAddress \
--			& USB_DIR_IN)==USB_DIR_IN)
-+			& USB_DIR_IN) == USB_DIR_IN)
- #define get_ep_by_pipe(udc, pipe)	((pipe == 1)? &udc->eps[0]: \
- 					&udc->eps[pipe])
- #define get_pipe_by_windex(windex)	((windex & USB_ENDPOINT_NUMBER_MASK) \
- 					* 2 + ((windex & USB_DIR_IN) ? 1 : 0))
- #define get_pipe_by_ep(EP)	(ep_index(EP) * 2 + ep_is_in(EP))
- 
-+/* Bulk only class request */
-+#define USB_BULK_RESET_REQUEST          0xff
-+
- #endif
---- a/drivers/usb/gadget/gadget_chips.h
-+++ b/drivers/usb/gadget/gadget_chips.h
-@@ -147,6 +147,11 @@
- #define	gadget_is_m66592(g)	0
- #endif
- 
-+#ifdef CONFIG_USB_GADGET_MCF5445X
-+#define gadget_is_mcf5445x(g)	!strcmp("fsl-usb2-udc", (g)->name)
-+#else
-+#define gadget_is_mcf5445x(g)	0
-+#endif
- 
- // CONFIG_USB_GADGET_SX2
- // CONFIG_USB_GADGET_AU1X00
-@@ -212,5 +217,7 @@ static inline int usb_gadget_controller_
- 		return 0x20;
- 	else if (gadget_is_m66592(gadget))
- 		return 0x21;
-+	else if (gadget_is_mcf5445x(gadget))
-+		return 0x22;
- 	return -ENOENT;
- }
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -231,6 +231,26 @@ config SUPERH_BUILT_IN_M66592
- 	   However, this problem is improved if change a value of
- 	   NET_IP_ALIGN to 4.
- 
-+config USB_GADGET_MCF5445X
-+	boolean "MCF5445X USB Device Controller"
-+	depends on M54455 && USB_M5445X_ULPI
-+	select USB_GADGET_DUALSPEED
-+	help
-+	   Freescale's MCF5445X processors include
-+	   an integrated device controller (as part of the OTG module).
-+	   It has four programmable, bidirectional endpoints,
-+	   including endpoint 0.
-+
-+	   Say "y" to link the driver statically, or "m" to build a
-+	   dynamically linked module called "mcf5445_udc" and force all
-+	   gadget drivers to also be dynamically linked.
-+
-+config USB_MCF5445X
-+	tristate
-+	depends on USB_GADGET_MCF5445X
-+	default USB_GADGET
-+	select USB_GADGET_SELECTED
-+
- config USB_GADGET_GOKU
- 	boolean "Toshiba TC86C001 'Goku-S'"
- 	depends on PCI
-@@ -285,17 +305,6 @@ config USB_OMAP
- 	default USB_GADGET
- 	select USB_GADGET_SELECTED
- 
--config USB_OTG
--	boolean "OTG Support"
--	depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD
--	help
--	   The most notable feature of USB OTG is support for a
--	   "Dual-Role" device, which can act as either a device
--	   or a host.  The initial role choice can be changed
--	   later, when two dual-role devices talk to each other.
--
--	   Select this only if your OMAP board has a Mini-AB connector.
--
- config USB_GADGET_S3C2410
- 	boolean "S3C2410 USB Device Controller"
- 	depends on ARCH_S3C2410
-@@ -369,6 +378,18 @@ config USB_DUMMY_HCD
- 
- endchoice
- 
-+config USB_OTG
-+	boolean "OTG Support"
-+	depends on (USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD) || \
-+		   (USB_GADGET_MCF5445X && USB_M5445X_ULPI)
-+	help
-+	   The most notable feature of USB OTG is support for a
-+	   "Dual-Role" device, which can act as either a device
-+	   or a host.  The initial role choice can be changed
-+	   later, when two dual-role devices talk to each other.
-+
-+	   Select this only if your OMAP board has a Mini-AB connector.
-+
- config USB_GADGET_DUALSPEED
- 	bool
- 	depends on USB_GADGET
---- a/drivers/usb/gadget/Makefile
-+++ b/drivers/usb/gadget/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_USB_AT91)		+= at91_udc.o
- obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
- obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
- obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
-+obj-$(CONFIG_USB_MCF5445X)	+= mcf5445x_udc.o
- 
- #
- # USB gadget drivers
---- /dev/null
-+++ b/drivers/usb/gadget/mcf5445x_udc.c
-@@ -0,0 +1,2745 @@
-+/*
-+ * Copyright Freescale Semiconductor, Inc. 2006-2007
-+ *
-+ *      Based on mpc_udc.c code
-+ *      of Li Yang and Jiang Bo (Freescale Semiconductor, Inc.)
-+ *
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ *   v0.004	30 July 2007		Duck
-+ *   		mcf5445x port
-+ *   v0.003	27 October 2006		Andrey Butok
-+ *		Added M5329EVB support (without external transceiver).
-+ *   v0.002	29 September 2006	Andrey Butok
-+ *		Some little changes. Added OTG support.
-+ *   v0.001	12 July 2006		Andrey Butok
-+ *   		Initial Release - developed on uClinux with 2.6.17.1 kernel.
-+ *   		Based on mpc_udc.c code
-+ *   		of Li Yang and Jiang Bo (Freescale Semiconductor, Inc.)
-+ *
-+ */
-+
-+#undef DEBUG
-+#undef VERBOSE
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/ioport.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/delay.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/irq.h>
-+#include <linux/timer.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/proc_fs.h>
-+#include <linux/mm.h>
-+#include <linux/platform_device.h>
-+#include <linux/moduleparam.h>
-+#include <linux/device.h>
-+#include <linux/usb/ch9.h>
-+#include <linux/usb/gadget.h>
-+#include <linux/usb/otg.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/usb/fsl_xcvr.h>
-+#include <linux/usb/fsl_usb2.h>
-+#include <linux/pm.h>
-+
-+#include <asm/byteorder.h>
-+#include <asm/system.h>
-+#include <asm/unaligned.h>
-+#include <asm/dma.h>
-+
-+#include <asm/mcfsim.h>
-+#include <asm/cacheflush.h>
-+
-+#include "fsl_usb2_udc.h"
-+
-+#define	DRIVER_DESC	"Freescale High-Speed USB SoC Device Controller driver"
-+#define	DRIVER_AUTHOR	"Freescale Semiconductor Inc."
-+#define	DRIVER_VERSION	"30 July 2007"
-+
-+#define cpu_to_hc32(x)	(x)
-+#define hc32_to_cpu(x)	(x)
-+
-+static int udc_suspend(struct fsl_udc *udc);
-+
-+#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
-+
-+static const char driver_name[] = "fsl-usb2-udc";
-+static const char driver_desc[] = DRIVER_DESC;
-+
-+volatile static struct fsl_usb_device_regs *dr_regs;
-+volatile static struct usb_sys_interface *usb_sys_regs;
-+
-+/* it is initialized in probe()  */
-+static struct fsl_udc *udc_controller;
-+
-+static const struct usb_endpoint_descriptor
-+fsl_ep0_desc = {
-+	.bLength =		USB_DT_ENDPOINT_SIZE,
-+	.bDescriptorType =	USB_DT_ENDPOINT,
-+	.bEndpointAddress =	0,
-+	.bmAttributes =		USB_ENDPOINT_XFER_CONTROL,
-+	.wMaxPacketSize =	USB_MAX_CTRL_PAYLOAD,
-+};
-+
-+static int fsl_udc_suspend(struct device *dev, pm_message_t state);
-+static int fsl_udc_resume(struct device *dev);
-+static void fsl_ep_fifo_flush(struct usb_ep *_ep);
-+
-+/********************************************************************
-+ *	Internal Used Function
-+********************************************************************/
-+/*-----------------------------------------------------------------
-+ * done() - retire a request; caller blocked irqs
-+ * @status : request status to be set, only works when
-+ *	request is still in progress.
-+ *--------------------------------------------------------------*/
-+static void done(struct fsl_ep *ep, struct fsl_req *req, int status)
-+{
-+	struct fsl_udc *udc = NULL;
-+	unsigned char stopped = ep->stopped;
-+
-+	udc = (struct fsl_udc *)ep->udc;
-+
-+	pr_debug("udc: req=0x%p\n", req);
-+	if (req->head) {
-+		pr_debug("udc: freeing head=0x%p\n", req->head);
-+		dma_pool_free(udc->td_pool, req->head, req->head->td_dma);
-+	}
-+
-+	/* the req->queue pointer is used by ep_queue() func, in which
-+	 * the request will be added into a udc_ep->queue 'd tail
-+	 * so here the req will be dropped from the ep->queue
-+	 */
-+	list_del_init(&req->queue);
-+
-+	/* req.status should be set as -EINPROGRESS in ep_queue() */
-+	if (req->req.status == -EINPROGRESS)
-+		req->req.status = status;
-+	else
-+		status = req->req.status;
-+
-+	pr_debug("udc: req=0x%p  mapped=%x\n", req, req->mapped);
-+
-+	if (req->mapped) {
-+		pr_debug("udc: calling dma_unmap_single(buf,%s)  req=0x%p  "
-+			 "a=0x%x  len=%d\n",
-+			 ep_is_in(ep) ? "to_dvc" : "from_dvc",
-+			 req, req->req.dma, req->req.length);
-+
-+		dma_unmap_single(ep->udc->gadget.dev.parent,
-+				 req->req.dma, req->req.length, ep_is_in(ep) ?
-+				 DMA_TO_DEVICE : DMA_FROM_DEVICE);
-+
-+		req->req.dma = DMA_ADDR_INVALID;
-+		req->mapped = 0;
-+		pr_debug("udc: req=0x%p set req.dma=0x%x\n", req, req->req.dma);
-+	} else {
-+		if ((req->req.length != 0)
-+		    && (req->req.dma != DMA_ADDR_INVALID)) {
-+			pr_debug("udc: calling dma_sync_single_for_cpu(buf,%s) "
-+				 "req=0x%p  dma=0x%x  len=%d\n",
-+				 ep_is_in(ep) ? "to_dvc" : "from_dvc", req,
-+				 req->req.dma, req->req.length);
-+
-+			dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
-+						req->req.dma, req->req.length,
-+						ep_is_in(ep) ? DMA_TO_DEVICE :
-+						DMA_FROM_DEVICE);
-+		}
-+	}
-+
-+	if (status && (status != -ESHUTDOWN)) {
-+		pr_debug("udc: complete %s req 0c%p stat %d len %u/%u\n",
-+			 ep->ep.name, &req->req, status,
-+			 req->req.actual, req->req.length);
-+	}
-+
-+	/* don't modify queue heads during completion callback */
-+	ep->stopped = 1;
-+
-+	spin_unlock(&ep->udc->lock);
-+
-+	/* this complete() should a func implemented by gadget layer,
-+	 * eg fsg->bulk_in_complete() */
-+	if (req->req.complete) {
-+		pr_debug("udc: calling gadget's complete()  req=0x%p\n", req);
-+		req->req.complete(&ep->ep, &req->req);
-+		pr_debug("udc: back from gadget's complete()\n");
-+	}
-+
-+	spin_lock(&ep->udc->lock);
-+	ep->stopped = stopped;
-+}
-+
-+/*
-+ * nuke(): delete all requests related to this ep
-+ * called with spinlock held
-+ *--------------------------------------------------------------*/
-+static void nuke(struct fsl_ep *ep, int status)
-+{
-+	ep->stopped = 1;
-+
-+	/* Flush fifo */
-+	fsl_ep_fifo_flush(&ep->ep);
-+
-+	/* Whether this eq has request linked */
-+	while (!list_empty(&ep->queue)) {
-+		struct fsl_req *req = NULL;
-+
-+		req = list_entry(ep->queue.next, struct fsl_req, queue);
-+		done(ep, req, status);
-+	}
-+}
-+
-+/*------------------------------------------------------------------
-+	Internal Hardware related function
-+ ------------------------------------------------------------------*/
-+
-+static int dr_controller_setup(struct fsl_udc *udc)
-+{
-+	unsigned int tmp;
-+	unsigned int __attribute((unused)) ctrl = 0;
-+	unsigned long timeout;
-+	struct fsl_usb2_platform_data *pdata;
-+
-+#define FSL_UDC_RESET_TIMEOUT 1000
-+
-+	/* before here, make sure dr_regs has been initialized */
-+	if (!udc)
-+		return -EINVAL;
-+	pdata = udc->pdata;
-+
-+	/* Stop and reset the usb controller */
-+	tmp = fsl_readl(&dr_regs->usbcmd);
-+	tmp &= ~USB_CMD_RUN_STOP;
-+	fsl_writel(tmp, &dr_regs->usbcmd);
-+
-+	tmp = fsl_readl(&dr_regs->usbcmd);
-+	tmp |= USB_CMD_CTRL_RESET;
-+	fsl_writel(tmp, &dr_regs->usbcmd);
-+
-+	/* Wait for reset to complete */
-+	timeout = jiffies + FSL_UDC_RESET_TIMEOUT;
-+	while (fsl_readl(&dr_regs->usbcmd) & USB_CMD_CTRL_RESET) {
-+		if (time_after(jiffies, timeout)) {
-+			ERR("udc reset timeout! \n");
-+			return -ETIMEDOUT;
-+		}
-+		cpu_relax();
-+	}
-+
-+	tmp = fsl_readl(&dr_regs->usbmode);
-+	tmp &= ~0x3;	/* clear mode bits */
-+	tmp |= USB_MODE_CTRL_MODE_DEVICE;
-+	/* Disable Setup Lockout */
-+	tmp |= USB_MODE_SETUP_LOCK_OFF;
-+	if (pdata->es)
-+		tmp |= USBMODE_ES;
-+	fsl_writel(tmp, &dr_regs->usbmode);
-+
-+	if (pdata->xcvr_ops && pdata->xcvr_ops->set_device)
-+		pdata->xcvr_ops->set_device();
-+
-+	/* Clear the setup status */
-+	fsl_writel(0, &dr_regs->usbsts);
-+
-+	tmp = udc->ep_qh_dma;
-+	tmp &= USB_EP_LIST_ADDRESS_MASK;
-+	fsl_writel(tmp, &dr_regs->endpointlistaddr);
-+
-+	/*
-+	VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x",
-+		(int)udc->ep_qh, (int)tmp,
-+		fsl_readl(&dr_regs->endpointlistaddr));
-+	*/
-+
-+
-+	if (pdata->have_sysif_regs) {
-+		/* Config control enable i/o output, cpu endian register */
-+		ctrl = __raw_readl(&usb_sys_regs->control);
-+		ctrl |= USB_CTRL_IOENB;
-+		__raw_writel(ctrl, &usb_sys_regs->control);
-+	}
-+
-+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-+	/* Turn on cache snooping hardware, since some PowerPC platforms
-+	 * wholly rely on hardware to deal with cache coherent. */
-+
-+	if (pdata->have_sysif_regs) {
-+		/* Setup Snooping for all the 4GB space */
-+		tmp = SNOOP_SIZE_2GB;	/* starts from 0x0, size 2G */
-+		__raw_writel(tmp, &usb_sys_regs->snoop1);
-+		tmp |= 0x80000000;	/* starts from 0x8000000, size 2G */
-+		__raw_writel(tmp, &usb_sys_regs->snoop2);
-+	}
-+#endif
-+
-+	return 0;
-+}
-+
-+static void pullup_enable(struct fsl_udc *udc)
-+{
-+	u32 temp;
-+
-+	unsigned short ccm = fsl_readw(&MCF_CCM_UOCSR);
-+	ccm |= MCF_CCM_UOCSR_BVLD;
-+	ccm &= ~MCF_CCM_UOCSR_SEND;
-+	fsl_writew(ccm, &MCF_CCM_UOCSR);
-+
-+	/* Enable DR irq reg */
-+	temp = USB_INTR_INT_EN | USB_INTR_ERR_INT_EN
-+		| USB_INTR_PTC_DETECT_EN | USB_INTR_RESET_EN
-+		| USB_INTR_DEVICE_SUSPEND | USB_INTR_SYS_ERR_EN;
-+
-+	fsl_writel(temp, &dr_regs->usbintr);
-+
-+	/* Set controller to Run */
-+	temp = fsl_readl(&dr_regs->usbcmd);
-+	temp |= USB_CMD_RUN_STOP;
-+	fsl_writel(temp, &dr_regs->usbcmd);
-+}
-+
-+static void pullup_disable(struct fsl_udc *udc)
-+{
-+	unsigned int tmp;
-+	unsigned short ccm;
-+
-+	VDBG();
-+	/* disable all INTRs */
-+	fsl_writel(0, &dr_regs->usbintr);
-+
-+	ccm = fsl_readw(&MCF_CCM_UOCSR);
-+	ccm &= ~MCF_CCM_UOCSR_BVLD;
-+	fsl_writew(ccm, &MCF_CCM_UOCSR);
-+
-+	/* set controller to Stop */
-+	tmp = fsl_readl(&dr_regs->usbcmd);
-+	tmp &= ~USB_CMD_RUN_STOP;
-+	fsl_writel(tmp, &dr_regs->usbcmd);
-+}
-+
-+static void dr_controller_run(struct fsl_udc *udc)
-+{
-+	VDBG();
-+	pullup_enable(udc);
-+	udc->stopped = 0;
-+}
-+
-+static void dr_controller_stop(struct fsl_udc *udc)
-+{
-+	pullup_disable(udc);
-+	udc->stopped = 1;
-+	udc->gadget.b_hnp_enable = 0;
-+	udc->gadget.a_hnp_support = 0;
-+	udc->gadget.a_alt_hnp_support = 0;
-+}
-+
-+void dr_ep_setup(unsigned char ep_num, unsigned char dir, unsigned char ep_type)
-+{
-+	unsigned int tmp_epctrl = 0;
-+
-+	tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
-+	if (dir) {
-+		if (ep_num)
-+			tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST;
-+		tmp_epctrl |= EPCTRL_TX_ENABLE;
-+		tmp_epctrl |= ((unsigned int)(ep_type)
-+				<< EPCTRL_TX_EP_TYPE_SHIFT);
-+	} else {
-+		if (ep_num)
-+			tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST;
-+		tmp_epctrl |= EPCTRL_RX_ENABLE;
-+		tmp_epctrl |= ((unsigned int)(ep_type)
-+				<< EPCTRL_RX_EP_TYPE_SHIFT);
-+	}
-+
-+	fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]);
-+}
-+
-+static void dr_ep_change_stall(unsigned char ep_num, unsigned char dir,
-+			       int value)
-+{
-+	u32 tmp_epctrl = 0;
-+
-+	tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
-+
-+	if (value) {
-+		/* set the stall bit */
-+		if (dir)
-+			tmp_epctrl |= EPCTRL_TX_EP_STALL;
-+		else
-+			tmp_epctrl |= EPCTRL_RX_EP_STALL;
-+	} else {
-+		/* clear the stall bit and reset data toggle */
-+		if (dir) {
-+			tmp_epctrl &= ~EPCTRL_TX_EP_STALL;
-+			tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST;
-+		} else {
-+			tmp_epctrl &= ~EPCTRL_RX_EP_STALL;
-+			tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST;
-+		}
-+	}
-+	fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]);
-+}
-+
-+/* Get stall status of a specific ep
-+   Return: 0: not stalled; 1:stalled */
-+static int dr_ep_get_stall(unsigned char ep_num, unsigned char dir)
-+{
-+	u32 epctrl;
-+
-+	epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
-+	if (dir)
-+		return (epctrl & EPCTRL_TX_EP_STALL) ? 1 : 0;
-+	else
-+		return (epctrl & EPCTRL_RX_EP_STALL) ? 1 : 0;
-+}
-+
-+/********************************************************************
-+	Internal Structure Build up functions
-+********************************************************************/
-+
-+/*------------------------------------------------------------------
-+* struct_ep_qh_setup(): set the Endpoint Capabilites field of QH
-+ * @zlt: Zero Length Termination Select (1: disable; 0: enable)
-+ * @mult: Mult field
-+ ------------------------------------------------------------------*/
-+static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num,
-+		unsigned char dir, unsigned char ep_type,
-+		unsigned int max_pkt_len,
-+		unsigned int zlt, unsigned char mult)
-+{
-+	struct ep_queue_head *p_QH = &udc->ep_qh[2 * ep_num + dir];
-+	unsigned int tmp = 0;
-+
-+	/* set the Endpoint Capabilites in QH */
-+	switch (ep_type) {
-+	case USB_ENDPOINT_XFER_CONTROL:
-+		/* Interrupt On Setup (IOS). for control ep  */
-+		tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
-+			| EP_QUEUE_HEAD_IOS;
-+		break;
-+	case USB_ENDPOINT_XFER_ISOC:
-+		tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
-+			| (mult << EP_QUEUE_HEAD_MULT_POS);
-+		break;
-+	case USB_ENDPOINT_XFER_BULK:
-+	case USB_ENDPOINT_XFER_INT:
-+		tmp = max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS;
-+		break;
-+	default:
-+		VDBG("error ep type is %d", ep_type);
-+		return;
-+	}
-+	if (zlt)
-+		tmp |= EP_QUEUE_HEAD_ZLT_SEL;
-+	p_QH->max_pkt_length = cpu_to_hc32(tmp);
-+
-+	return;
-+}
-+
-+/* Setup qh structure and ep register for ep0. */
-+static void ep0_setup(struct fsl_udc *udc)
-+{
-+	/* the intialization of an ep includes: fields in QH, Regs,
-+	 * fsl_ep struct */
-+	struct_ep_qh_setup(udc, 0, USB_RECV, USB_ENDPOINT_XFER_CONTROL,
-+			USB_MAX_CTRL_PAYLOAD, 0, 0);
-+	struct_ep_qh_setup(udc, 0, USB_SEND, USB_ENDPOINT_XFER_CONTROL,
-+			USB_MAX_CTRL_PAYLOAD, 0, 0);
-+	dr_ep_setup(0, USB_RECV, USB_ENDPOINT_XFER_CONTROL);
-+	dr_ep_setup(0, USB_SEND, USB_ENDPOINT_XFER_CONTROL);
-+
-+	return;
-+
-+}
-+
-+/***********************************************************************
-+		Endpoint Management Functions
-+***********************************************************************/
-+
-+/*-------------------------------------------------------------------------
-+ * when configurations are set, or when interface settings change
-+ * for example the do_set_interface() in gadget layer,
-+ * the driver will enable or disable the relevant endpoints
-+ * ep0 doesn't use this routine. It is always enabled.
-+-------------------------------------------------------------------------*/
-+static int fsl_ep_enable(struct usb_ep *_ep,
-+		const struct usb_endpoint_descriptor *desc)
-+{
-+	struct fsl_udc *udc = NULL;
-+	struct fsl_ep *ep = NULL;
-+	unsigned short max = 0;
-+	unsigned char mult = 0, zlt;
-+	int retval = -EINVAL;
-+	unsigned long flags = 0;
-+
-+	ep = container_of(_ep, struct fsl_ep, ep);
-+
-+	/* catch various bogus parameters */
-+	if (!_ep || !desc || ep->desc
-+			|| (desc->bDescriptorType != USB_DT_ENDPOINT))
-+		return -EINVAL;
-+
-+	udc = ep->udc;
-+
-+	if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN))
-+		return -ESHUTDOWN;
-+
-+	max = le16_to_cpu(desc->wMaxPacketSize);
-+
-+	/* Disable automatic zlp generation.  Driver is reponsible to indicate
-+	 * explicitly through req->req.zero.  This is needed to enable multi-td
-+	 * request. */
-+	zlt = 1;
-+
-+	/* Assume the max packet size from gadget is always correct */
-+	switch (desc->bmAttributes & 0x03) {
-+	case USB_ENDPOINT_XFER_CONTROL:
-+	case USB_ENDPOINT_XFER_BULK:
-+	case USB_ENDPOINT_XFER_INT:
-+		/* mult = 0.  Execute N Transactions as demonstrated by
-+		 * the USB variable length packet protocol where N is
-+		 * computed using the Maximum Packet Length (dQH) and
-+		 * the Total Bytes field (dTD) */
-+		mult = 0;
-+		break;
-+	case USB_ENDPOINT_XFER_ISOC:
-+		/* Calculate transactions needed for high bandwidth iso */
-+		mult = (unsigned char)(1 + ((max >> 11) & 0x03));
-+		max = max & 0x8ff;	/* bit 0~10 */
-+		/* 3 transactions at most */
-+		if (mult > 3)
-+			goto en_done;
-+		break;
-+	default:
-+		goto en_done;
-+	}
-+
-+	spin_lock_irqsave(&udc->lock, flags);
-+	ep->ep.maxpacket = max;
-+	ep->desc = desc;
-+	ep->stopped = 0;
-+
-+	/* Controller related setup */
-+	/* Init EPx Queue Head (Ep Capabilites field in QH
-+	 * according to max, zlt, mult) */
-+	struct_ep_qh_setup(udc, (unsigned char) ep_index(ep),
-+			(unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
-+					?  USB_SEND : USB_RECV),
-+			(unsigned char) (desc->bmAttributes
-+					& USB_ENDPOINT_XFERTYPE_MASK),
-+			max, zlt, mult);
-+
-+	/* Init endpoint ctrl register */
-+	dr_ep_setup((unsigned char) ep_index(ep),
-+			(unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
-+					? USB_SEND : USB_RECV),
-+			(unsigned char) (desc->bmAttributes
-+					& USB_ENDPOINT_XFERTYPE_MASK));
-+
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+	retval = 0;
-+
-+	VDBG("enabled %s (ep%d%s) maxpacket %d", ep->ep.name,
-+			ep->desc->bEndpointAddress & 0x0f,
-+			(desc->bEndpointAddress & USB_DIR_IN)
-+				? "in" : "out", max);
-+en_done:
-+	return retval;
-+}
-+
-+/*---------------------------------------------------------------------
-+ * @ep : the ep being unconfigured. May not be ep0
-+ * Any pending and uncomplete req will complete with status (-ESHUTDOWN)
-+*---------------------------------------------------------------------*/
-+static int fsl_ep_disable(struct usb_ep *_ep)
-+{
-+	struct fsl_udc *udc = NULL;
-+	struct fsl_ep *ep = NULL;
-+	unsigned long flags = 0;
-+	u32 epctrl;
-+	int ep_num;
-+
-+	ep = container_of(_ep, struct fsl_ep, ep);
-+	if (!_ep || !ep->desc) {
-+		pr_debug("udc: %s not enabled\n", _ep ? ep->ep.name : NULL);
-+		return -EINVAL;
-+	}
-+
-+	/* disable ep on controller */
-+	ep_num = ep_index(ep);
-+	epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
-+	if (ep_is_in(ep))
-+		epctrl &= ~EPCTRL_TX_ENABLE;
-+	else
-+		epctrl &= ~EPCTRL_RX_ENABLE;
-+	fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
-+
-+	udc = (struct fsl_udc *)ep->udc;
-+	spin_lock_irqsave(&udc->lock, flags);
-+
-+	/* nuke all pending requests (does flush) */
-+	nuke(ep, -ESHUTDOWN);
-+
-+	ep->desc = 0;
-+	ep->stopped = 1;
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	pr_debug("udc: disabled %s OK\n", _ep->name);
-+	return 0;
-+}
-+
-+/*---------------------------------------------------------------------
-+ * allocate a request object used by this endpoint
-+ * the main operation is to insert the req->queue to the eq->queue
-+ * Returns the request, or null if one could not be allocated
-+*---------------------------------------------------------------------*/
-+static struct usb_request *
-+fsl_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
-+{
-+	struct fsl_req *req = NULL;
-+
-+	req = kzalloc(sizeof *req, gfp_flags);
-+	if (!req)
-+		return NULL;
-+
-+	req->req.dma = DMA_ADDR_INVALID;
-+	pr_debug("udc: req=0x%p   set req.dma=0x%x\n", req, req->req.dma);
-+	INIT_LIST_HEAD(&req->queue);
-+
-+	return &req->req;
-+}
-+
-+static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+	struct fsl_req *req;
-+
-+	req = container_of(_req, struct fsl_req, req);
-+	pr_debug("udc: req=0x%p\n", req);
-+
-+	if (_req)
-+		kfree(req);
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+static int fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
-+{
-+	int i = ep_index(ep) * 2 + ep_is_in(ep);
-+	u32 temp, bitmask, tmp_stat;
-+	struct ep_queue_head *dQH = &ep->udc->ep_qh[i];
-+
-+	pr_debug("udc: queue req=0x%p to ep index %d\n", req, i);
-+
-+	bitmask = ep_is_in(ep)
-+		? (1 << (ep_index(ep) + 16))
-+		: (1 << (ep_index(ep)));
-+
-+	/* check if the pipe is empty */
-+	if (!(list_empty(&ep->queue))) {
-+		/* Add td to the end */
-+		struct fsl_req *lastreq;
-+		lastreq = list_entry(ep->queue.prev, struct fsl_req, queue);
-+		lastreq->tail->next_td_ptr =
-+			cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK);
-+		/* Read prime bit, if 1 goto done */
-+		if (fsl_readl(&dr_regs->endpointprime) & bitmask)
-+			goto out;
-+
-+		do {
-+			/* Set ATDTW bit in USBCMD */
-+			temp = fsl_readl(&dr_regs->usbcmd);
-+			fsl_writel(temp | USB_CMD_ATDTW, &dr_regs->usbcmd);
-+
-+			/* Read correct status bit */
-+			tmp_stat = fsl_readl(&dr_regs->endptstatus) & bitmask;
-+
-+		} while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_ATDTW));
-+
-+		/* Write ATDTW bit to 0 */
-+		temp = fsl_readl(&dr_regs->usbcmd);
-+		fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd);
-+
-+		if (tmp_stat)
-+			goto out;
-+	}
-+
-+	/* Write dQH next pointer and terminate bit to 0 */
-+	temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
-+	dQH->next_dtd_ptr = cpu_to_hc32(temp);
-+
-+	/* Clear active and halt bit */
-+	temp = cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
-+			| EP_QUEUE_HEAD_STATUS_HALT));
-+	dQH->size_ioc_int_sts &= temp;
-+
-+	/* Prime endpoint by writing 1 to ENDPTPRIME */
-+	temp = ep_is_in(ep)
-+		? (1 << (ep_index(ep) + 16))
-+		: (1 << (ep_index(ep)));
-+	fsl_writel(temp, &dr_regs->endpointprime);
-+out:
-+	return 0;
-+}
-+
-+/* Fill in the dTD structure
-+ * @req: request that the transfer belongs to
-+ * @length: return actually data length of the dTD
-+ * @dma: return dma address of the dTD
-+ * @is_last: return flag if it is the last dTD of the request
-+ * return: pointer to the built dTD */
-+static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
-+		dma_addr_t *dma, int *is_last)
-+{
-+	u32 swap_temp;
-+	struct ep_td_struct *dtd;
-+
-+	/* how big will this transfer be? */
-+	*length = min(req->req.length - req->req.actual,
-+			(unsigned)EP_MAX_LENGTH_TRANSFER);
-+
-+	dtd = dma_pool_alloc(udc_controller->td_pool, GFP_KERNEL, dma);
-+	if (dtd == NULL)
-+		return dtd;
-+
-+	dtd->td_dma = *dma;
-+	/* Clear reserved field */
-+	swap_temp = hc32_to_cpu(dtd->size_ioc_sts);
-+	swap_temp &= ~DTD_RESERVED_FIELDS;
-+	dtd->size_ioc_sts = cpu_to_hc32(swap_temp);
-+
-+	/* Init all of buffer page pointers */
-+	swap_temp = (u32) (req->req.dma + req->req.actual);
-+	dtd->buff_ptr0 = cpu_to_hc32(swap_temp);
-+	dtd->buff_ptr1 = cpu_to_hc32(swap_temp + 0x1000);
-+	dtd->buff_ptr2 = cpu_to_hc32(swap_temp + 0x2000);
-+	dtd->buff_ptr3 = cpu_to_hc32(swap_temp + 0x3000);
-+	dtd->buff_ptr4 = cpu_to_hc32(swap_temp + 0x4000);
-+
-+	req->req.actual += *length;
-+
-+	/* zlp is needed if req->req.zero is set */
-+	if (req->req.zero) {
-+		if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
-+			*is_last = 1;
-+		else
-+			*is_last = 0;
-+	} else if (req->req.length == req->req.actual)
-+		*is_last = 1;
-+	else
-+		*is_last = 0;
-+
-+	if ((*is_last) == 0)
-+		VDBG("multi-dtd request!\n");
-+	/* Fill in the transfer size; set active bit */
-+	swap_temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE);
-+
-+	/* Enable interrupt for the last dtd of a request */
-+	if (*is_last && !req->req.no_interrupt)
-+		swap_temp |= DTD_IOC;
-+
-+	dtd->size_ioc_sts = cpu_to_hc32(swap_temp);
-+
-+	mb();
-+
-+	VDBG("length = %d address= 0x%x", *length, (int)*dma);
-+
-+	return dtd;
-+}
-+
-+/* Generate dtd chain for a request */
-+static int fsl_req_to_dtd(struct fsl_req *req)
-+{
-+	unsigned	count;
-+	int		is_last;
-+	int		is_first = 1;
-+	struct ep_td_struct	*last_dtd = NULL, *dtd;
-+	dma_addr_t dma;
-+
-+	do {
-+		dtd = fsl_build_dtd(req, &count, &dma, &is_last);
-+		if (dtd == NULL)
-+			return -ENOMEM;
-+
-+		if (is_first) {
-+			is_first = 0;
-+			req->head = dtd;
-+		} else {
-+			last_dtd->next_td_ptr = hc32_to_cpu(dma);
-+			last_dtd->next_td_virt = dtd;
-+		}
-+		last_dtd = dtd;
-+
-+		req->dtd_count++;
-+	} while (!is_last);
-+
-+	dtd->next_td_ptr = cpu_to_hc32(DTD_NEXT_TERMINATE);
-+
-+	req->tail = dtd;
-+
-+	return 0;
-+}
-+
-+/* queues (submits) an I/O request to an endpoint */
-+static int
-+fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
-+{
-+	struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep);
-+	struct fsl_req *req = container_of(_req, struct fsl_req, req);
-+	struct fsl_udc *udc;
-+	unsigned long flags;
-+	int is_iso = 0;
-+
-+	/* catch various bogus parameters */
-+	if (!_req || !req->req.complete || !req->req.buf
-+			|| !list_empty(&req->queue)) {
-+		VDBG("%s, bad params\n", __FUNCTION__);
-+		return -EINVAL;
-+	}
-+	if (!_ep || (!ep->desc && ep_index(ep))) {
-+		VDBG("%s, bad ep\n", __FUNCTION__);
-+		return -EINVAL;
-+	}
-+	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
-+		if (req->req.length > ep->ep.maxpacket)
-+			return -EMSGSIZE;
-+		is_iso = 1;
-+	}
-+
-+	udc = ep->udc;
-+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
-+		return -ESHUTDOWN;
-+
-+	req->ep = ep;
-+
-+	/* map virtual address to hardware */
-+	if (req->req.dma == DMA_ADDR_INVALID) {
-+		req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
-+					req->req.buf,
-+					req->req.length, ep_is_in(ep)
-+						? DMA_TO_DEVICE
-+						: DMA_FROM_DEVICE);
-+		req->mapped = 1;
-+	} else {
-+		dma_sync_single_for_device(ep->udc->gadget.dev.parent,
-+					req->req.dma, req->req.length,
-+					ep_is_in(ep)
-+						? DMA_TO_DEVICE
-+						: DMA_FROM_DEVICE);
-+		req->mapped = 0;
-+	}
-+
-+	req->req.status = -EINPROGRESS;
-+	req->req.actual = 0;
-+	req->dtd_count = 0;
-+
-+	spin_lock_irqsave(&udc->lock, flags);
-+
-+	/* build dtds and push them to device queue */
-+	if (!fsl_req_to_dtd(req)) {
-+		fsl_queue_td(ep, req);
-+	} else {
-+		spin_unlock_irqrestore(&udc->lock, flags);
-+		return -ENOMEM;
-+	}
-+
-+	/* Update ep0 state */
-+	if ((ep_index(ep) == 0))
-+		udc->ep0_state = DATA_STATE_XMIT;
-+
-+	/* irq handler advances the queue */
-+	if (req != NULL)
-+		list_add_tail(&req->queue, &ep->queue);
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	return 0;
-+}
-+
-+/* dequeues (cancels, unlinks) an I/O request from an endpoint */
-+static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+	struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep);
-+	struct fsl_req *req;
-+	unsigned long flags;
-+	int ep_num, stopped, ret = 0;
-+	u32 epctrl;
-+
-+	if (!_ep || !_req)
-+		return -EINVAL;
-+
-+	spin_lock_irqsave(&ep->udc->lock, flags);
-+	stopped = ep->stopped;
-+
-+	/* Stop the ep before we deal with the queue */
-+	ep->stopped = 1;
-+	ep_num = ep_index(ep);
-+	epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
-+	if (ep_is_in(ep))
-+		epctrl &= ~EPCTRL_TX_ENABLE;
-+	else
-+		epctrl &= ~EPCTRL_RX_ENABLE;
-+	fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
-+
-+	/* make sure it's actually queued on this endpoint */
-+	list_for_each_entry(req, &ep->queue, queue) {
-+		if (&req->req == _req)
-+			break;
-+	}
-+	if (&req->req != _req) {
-+		ret = -EINVAL;
-+		goto out;
-+	}
-+
-+	/* The request is in progress, or completed but not dequeued */
-+	if (ep->queue.next == &req->queue) {
-+		_req->status = -ECONNRESET;
-+		fsl_ep_fifo_flush(_ep);	/* flush current transfer */
-+
-+		/* The request isn't the last request in this ep queue */
-+		if (req->queue.next != &ep->queue) {
-+			struct ep_queue_head *qh;
-+			struct fsl_req *next_req;
-+
-+			qh = ep->qh;
-+			next_req = list_entry(req->queue.next, struct fsl_req,
-+					queue);
-+
-+			/* Point the QH to the first TD of next request */
-+			fsl_writel((u32) next_req->head, &qh->curr_dtd_ptr);
-+		}
-+
-+		/* The request hasn't been processed, patch up the TD chain */
-+	} else {
-+		struct fsl_req *prev_req;
-+
-+		prev_req = list_entry(req->queue.prev, struct fsl_req, queue);
-+		fsl_writel(fsl_readl(&req->tail->next_td_ptr),
-+				&prev_req->tail->next_td_ptr);
-+
-+	}
-+
-+	done(ep, req, -ECONNRESET);
-+
-+	/* Enable EP */
-+out:	epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
-+	if (ep_is_in(ep))
-+		epctrl |= EPCTRL_TX_ENABLE;
-+	else
-+		epctrl |= EPCTRL_RX_ENABLE;
-+	fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
-+	ep->stopped = stopped;
-+
-+	spin_unlock_irqrestore(&ep->udc->lock, flags);
-+	return ret;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*-----------------------------------------------------------------
-+ * modify the endpoint halt feature
-+ * @ep: the non-isochronous endpoint being stalled
-+ * @value: 1--set halt  0--clear halt
-+ * Returns zero, or a negative error code.
-+*----------------------------------------------------------------*/
-+static int fsl_ep_set_halt(struct usb_ep *_ep, int value)
-+{
-+	struct fsl_ep *ep = NULL;
-+	unsigned long flags = 0;
-+	int status = -EOPNOTSUPP;	/* operation not supported */
-+	unsigned char ep_dir = 0, ep_num = 0;
-+	struct fsl_udc *udc = NULL;
-+
-+	ep = container_of(_ep, struct fsl_ep, ep);
-+	udc = ep->udc;
-+	if (!_ep || !ep->desc) {
-+		status = -EINVAL;
-+		goto out;
-+	}
-+
-+	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
-+		status = -EOPNOTSUPP;
-+		goto out;
-+	}
-+
-+	/* Attempt to halt IN ep will fail if any transfer requests
-+	 * are still queue */
-+	if (value && ep_is_in(ep) && !list_empty(&ep->queue)) {
-+		status = -EAGAIN;
-+		goto out;
-+	}
-+
-+	status = 0;
-+	ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV;
-+	ep_num = (unsigned char)(ep_index(ep));
-+	spin_lock_irqsave(&ep->udc->lock, flags);
-+	dr_ep_change_stall(ep_num, ep_dir, value);
-+	spin_unlock_irqrestore(&ep->udc->lock, flags);
-+
-+	if (ep_index(ep) == 0) {
-+		udc->ep0_state = WAIT_FOR_SETUP;
-+		udc->ep0_dir = 0;
-+	}
-+out:
-+	VDBG(" %s %s halt stat %d", ep->ep.name,
-+			value ?  "set" : "clear", status);
-+
-+	return status;
-+}
-+
-+static void fsl_ep_fifo_flush(struct usb_ep *_ep)
-+{
-+	struct fsl_ep *ep;
-+	int ep_num, ep_dir;
-+	u32 bits;
-+	unsigned long timeout;
-+#define FSL_UDC_FLUSH_TIMEOUT 1000
-+
-+	if (!_ep) {
-+		return;
-+	} else {
-+		ep = container_of(_ep, struct fsl_ep, ep);
-+		if (!ep->desc)
-+			return;
-+	}
-+	ep_num = ep_index(ep);
-+	ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV;
-+
-+	if (ep_num == 0)
-+		bits = (1 << 16) | 1;
-+	else if (ep_dir == USB_SEND)
-+		bits = 1 << (16 + ep_num);
-+	else
-+		bits = 1 << ep_num;
-+
-+	timeout = jiffies + FSL_UDC_FLUSH_TIMEOUT;
-+	do {
-+		fsl_writel(bits, &dr_regs->endptflush);
-+
-+		/* Wait until flush complete */
-+		while (fsl_readl(&dr_regs->endptflush)) {
-+			if (time_after(jiffies, timeout)) {
-+				ERR("ep flush timeout\n");
-+				return;
-+			}
-+			cpu_relax();
-+		}
-+		/* See if we need to flush again */
-+	} while (fsl_readl(&dr_regs->endptstatus) & bits);
-+}
-+
-+static struct usb_ep_ops fsl_ep_ops = {
-+	.enable = fsl_ep_enable,
-+	.disable = fsl_ep_disable,
-+
-+	.alloc_request = fsl_alloc_request,
-+	.free_request = fsl_free_request,
-+
-+	.queue = fsl_ep_queue,
-+	.dequeue = fsl_ep_dequeue,
-+
-+	.set_halt = fsl_ep_set_halt,
-+	.fifo_flush = fsl_ep_fifo_flush,	/* flush fifo */
-+};
-+
-+/*-------------------------------------------------------------------------
-+		Gadget Driver Layer Operations
-+-------------------------------------------------------------------------*/
-+
-+/*----------------------------------------------------------------------
-+ * Get the current frame number (from DR frame_index Reg )
-+ *----------------------------------------------------------------------*/
-+static int fsl_get_frame(struct usb_gadget *gadget)
-+{
-+	return (int)(fsl_readl(&dr_regs->frindex) & USB_FRINDEX_MASKS);
-+}
-+
-+/*-----------------------------------------------------------------------
-+ * Tries to wake up the host connected to this gadget
-+ -----------------------------------------------------------------------*/
-+static int fsl_wakeup(struct usb_gadget *gadget)
-+{
-+	struct fsl_udc *udc = container_of(gadget, struct fsl_udc, gadget);
-+	u32 portsc;
-+
-+	/* Remote wakeup feature not enabled by host */
-+	if (!udc->remote_wakeup)
-+		return -ENOTSUPP;
-+
-+	portsc = fsl_readl(&dr_regs->portsc1);
-+	/* not suspended? */
-+	if (!(portsc & PORTSCX_PORT_SUSPEND))
-+		return 0;
-+	/* trigger force resume */
-+	portsc |= PORTSCX_PORT_FORCE_RESUME;
-+	fsl_writel(portsc, &dr_regs->portsc1);
-+	return 0;
-+}
-+
-+static int can_pullup(struct fsl_udc *udc)
-+{
-+	return udc->driver && udc->softconnect && udc->vbus_active;
-+}
-+
-+/*
-+ * Notify controller that VBUS is powered, Called by whatever
-+ * detects VBUS sessions
-+ * @param gadger    gadger pointer
-+ * @param is_active is active?
-+ * @return Returns zero on success , or a negative error code
-+ */
-+static int fsl_vbus_session(struct usb_gadget *gadget, int is_active)
-+{
-+	struct fsl_udc	*udc;
-+	unsigned long	flags;
-+
-+	udc = container_of(gadget, struct fsl_udc, gadget);
-+	spin_lock_irqsave(&udc->lock, flags);
-+
-+	pr_debug("udc: VBUS %s\n", is_active ? "on" : "off");
-+	udc->vbus_active = (is_active != 0);
-+
-+	if (can_pullup(udc)) {
-+		pullup_enable(udc);
-+		udc_controller->usb_state = USB_STATE_ATTACHED;
-+	} else {
-+		pullup_disable(udc);
-+		udc_controller->usb_state = USB_STATE_NOTATTACHED;
-+	}
-+	udc_controller->ep0_state = WAIT_FOR_SETUP;
-+	udc_controller->ep0_dir = 0;
-+
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+	return 0;
-+}
-+
-+/* constrain controller's VBUS power usage
-+ * This call is used by gadget drivers during SET_CONFIGURATION calls,
-+ * reporting how much power the device may consume.  For example, this
-+ * could affect how quickly batteries are recharged.
-+ *
-+ * Returns zero on success, else negative errno.
-+ */
-+static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA)
-+{
-+#ifdef CONFIG_USB_OTG
-+	struct fsl_udc *udc;
-+
-+	udc = container_of(gadget, struct fsl_udc, gadget);
-+
-+	if (udc->transceiver)
-+		return otg_set_power(udc->transceiver, mA);
-+#endif
-+	return -ENOTSUPP;
-+}
-+
-+/*
-+ * Change Data+ pullup status
-+ * this func is used by usb_gadget_connect/disconnet
-+ */
-+static int fsl_pullup(struct usb_gadget *gadget, int is_on)
-+{
-+	struct fsl_udc *udc;
-+
-+	udc = container_of(gadget, struct fsl_udc, gadget);
-+	udc->softconnect = (is_on != 0);
-+	if (can_pullup(udc))
-+		fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
-+				&dr_regs->usbcmd);
-+	else
-+		fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP),
-+				&dr_regs->usbcmd);
-+
-+	return 0;
-+}
-+
-+/* defined in usb_gadget.h */
-+static struct usb_gadget_ops fsl_gadget_ops = {
-+	.get_frame = fsl_get_frame,
-+	.wakeup = fsl_wakeup,
-+	.vbus_session = fsl_vbus_session,
-+	.vbus_draw = fsl_vbus_draw,
-+	.pullup = fsl_pullup,
-+};
-+
-+/* Set protocol stall on ep0, protocol stall will automatically be cleared
-+   on new transaction */
-+static void ep0stall(struct fsl_udc *udc)
-+{
-+	u32 tmp;
-+
-+	/* must set tx and rx to stall at the same time */
-+	tmp = fsl_readl(&dr_regs->endptctrl[0]);
-+	tmp |= EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL;
-+	fsl_writel(tmp, &dr_regs->endptctrl[0]);
-+	udc->ep0_state = WAIT_FOR_SETUP;
-+	udc->ep0_dir = 0;
-+}
-+
-+/* Prime a status phase for ep0 */
-+static int ep0_prime_status(struct fsl_udc *udc, int direction)
-+{
-+	struct fsl_req *req = udc->status_req;
-+	struct fsl_ep *ep;
-+	int status = 0;
-+
-+	if (direction == EP_DIR_IN)
-+		udc->ep0_dir = USB_DIR_IN;
-+	else
-+		udc->ep0_dir = USB_DIR_OUT;
-+
-+	ep = &udc->eps[0];
-+	udc->ep0_state = WAIT_FOR_OUT_STATUS;
-+
-+	req->ep = ep;
-+	req->req.length = 0;
-+	req->req.status = -EINPROGRESS;
-+	req->req.actual = 0;
-+	req->req.complete = NULL;
-+	req->dtd_count = 0;
-+
-+	if (fsl_req_to_dtd(req) == 0)
-+		status = fsl_queue_td(ep, req);
-+	else
-+		return -ENOMEM;
-+
-+	if (status)
-+		ERR("Can't queue ep0 status request \n");
-+	list_add_tail(&req->queue, &ep->queue);
-+
-+	return status;
-+}
-+
-+static inline int udc_reset_ep_queue(struct fsl_udc *udc, u8 pipe)
-+{
-+	struct fsl_ep *ep = get_ep_by_pipe(udc, pipe);
-+
-+	if (!ep->name)
-+		return 0;
-+
-+	nuke(ep, -ESHUTDOWN);
-+
-+	return 0;
-+}
-+
-+/*
-+ * ch9 Set address
-+ */
-+static void ch9setaddress(struct fsl_udc *udc, u16 value, u16 index, u16 length)
-+{
-+	/* Save the new address to device struct */
-+	udc->device_address = (u8) value;
-+	/* Update usb state */
-+	udc->usb_state = USB_STATE_ADDRESS;
-+	/* Status phase */
-+	if (ep0_prime_status(udc, EP_DIR_IN))
-+		ep0stall(udc);
-+}
-+
-+/*
-+ * ch9 Get status
-+ */
-+static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
-+			 u16 index, u16 length)
-+{
-+	u16 tmp = 0;		/* Status, cpu endian */
-+
-+	struct fsl_req *req;
-+	struct fsl_ep *ep;
-+	int status = 0;
-+
-+	ep = &udc->eps[0];
-+
-+	if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
-+		/* Get device status */
-+		tmp = 1 << USB_DEVICE_SELF_POWERED;
-+		tmp |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
-+	} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
-+		/* Get interface status */
-+		/* We don't have interface information in udc driver */
-+		tmp = 0;
-+	} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
-+		/* Get endpoint status */
-+		struct fsl_ep *target_ep;
-+
-+		target_ep = get_ep_by_pipe(udc, get_pipe_by_windex(index));
-+
-+		/* stall if endpoint doesn't exist */
-+		if (!target_ep->desc)
-+			goto stall;
-+		tmp = dr_ep_get_stall(ep_index(target_ep), ep_is_in(target_ep))
-+				<< USB_ENDPOINT_HALT;
-+	}
-+
-+	udc->ep0_dir = USB_DIR_IN;
-+	/* Borrow the per device status_req */
-+	req = udc->status_req;
-+	/* Fill in the reqest structure */
-+	*((u16 *) req->req.buf) = cpu_to_le16(tmp);
-+	req->ep = ep;
-+	req->req.length = 2;
-+	req->req.status = -EINPROGRESS;
-+	req->req.actual = 0;
-+	req->req.complete = NULL;
-+	req->dtd_count = 0;
-+
-+	/* prime the data phase */
-+	if ((fsl_req_to_dtd(req) == 0))
-+		status = fsl_queue_td(ep, req);
-+	else			/* no mem */
-+		goto stall;
-+
-+	if (status) {
-+		ERR("Can't respond to getstatus request \n");
-+		goto stall;
-+	}
-+	list_add_tail(&req->queue, &ep->queue);
-+	udc->ep0_state = DATA_STATE_XMIT;
-+	return;
-+stall:
-+	ep0stall(udc);
-+}
-+
-+static void ch9setconfig(struct fsl_udc *udc, u16 value, u16 index,
-+			 u16 length)
-+{
-+	pr_debug("udc: 1 calling gadget driver->setup\n");
-+	udc->ep0_dir = USB_DIR_IN;
-+	if (udc->driver->setup(&udc->gadget, &udc->local_setup_buff) >= 0) {
-+		/* gadget layer deal with the status phase */
-+		udc->usb_state = USB_STATE_CONFIGURED;
-+		udc->ep0_state = WAIT_FOR_OUT_STATUS;
-+		pr_debug("udc: ep0_state now WAIT_FOR_OUT_STATUS\n");
-+	}
-+}
-+
-+static void setup_received_irq(struct fsl_udc *udc,
-+			       struct usb_ctrlrequest *setup)
-+{
-+	u32 tmp;
-+	u16 ptc = 0;		/* port test control */
-+	int handled = 1;	/* set to zero if we do not handle the message,
-+				   and should pass it to the gadget driver */
-+
-+	/*
-+	 * gadget drivers expect the setup pkt to be in wire format,
-+	 * so leave it alone and make local copies of stuff we need.
-+	 */
-+	u16 wValue = le16_to_cpu(setup->wValue);
-+	u16 wIndex = le16_to_cpu(setup->wIndex);
-+	u16 wLength = le16_to_cpu(setup->wLength);
-+
-+
-+	pr_debug("udc: request=0x%x\n", setup->bRequest);
-+
-+	udc_reset_ep_queue(udc, 0);
-+
-+	/* We asume setup only occurs on EP0 */
-+	if (setup->bRequestType & USB_DIR_IN)
-+		udc->ep0_dir = USB_DIR_IN;
-+	else
-+		udc->ep0_dir = USB_DIR_OUT;
-+
-+	if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) {
-+		/* handle class requests */
-+		switch (setup->bRequest) {
-+
-+		case USB_BULK_RESET_REQUEST:
-+			udc->ep0_dir = USB_DIR_IN;
-+			if (udc->driver->setup(&udc->gadget,
-+					       &udc->local_setup_buff) >= 0) {
-+				udc->ep0_state = WAIT_FOR_SETUP;
-+				pr_debug("udc: ep0_state now WAIT_FOR_SETUP\n");
-+			}
-+			break;
-+
-+		default:
-+			handled = 0;
-+			break;
-+		}
-+	} else if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
-+		/* handle standard requests */
-+		switch (setup->bRequest) {
-+
-+		case USB_REQ_GET_STATUS:
-+			if ((setup->
-+			     bRequestType & (USB_DIR_IN | USB_TYPE_STANDARD))
-+			    != (USB_DIR_IN | USB_TYPE_STANDARD))
-+				break;
-+			ch9getstatus(udc, setup->bRequestType, wValue, wIndex,
-+				     wLength);
-+			break;
-+
-+		case USB_REQ_SET_ADDRESS:
-+			if (setup->bRequestType !=
-+			    (USB_DIR_OUT | USB_TYPE_STANDARD |
-+			     USB_RECIP_DEVICE))
-+				break;
-+			ch9setaddress(udc, wValue, wIndex, wLength);
-+			break;
-+
-+		case USB_REQ_SET_CONFIGURATION:
-+			if (setup->bRequestType !=
-+			    (USB_DIR_OUT | USB_TYPE_STANDARD |
-+			     USB_RECIP_DEVICE))
-+				break;
-+			/* gadget layer take over the status phase */
-+			ch9setconfig(udc, wValue, wIndex, wLength);
-+			break;
-+		case USB_REQ_SET_INTERFACE:
-+			if (setup->bRequestType !=
-+			    (USB_DIR_OUT | USB_TYPE_STANDARD |
-+			     USB_RECIP_INTERFACE))
-+				break;
-+			udc->ep0_dir = USB_DIR_IN;
-+			if (udc->driver->setup(&udc->gadget,
-+					       &udc->local_setup_buff) >= 0)
-+				/* gadget layer take over the status phase */
-+				break;
-+			/* Requests with no data phase */
-+		case USB_REQ_CLEAR_FEATURE:
-+		case USB_REQ_SET_FEATURE:
-+			{	/* status transaction */
-+				int rc = -EOPNOTSUPP;
-+
-+				if ((setup->bRequestType & USB_TYPE_MASK) !=
-+				    USB_TYPE_STANDARD)
-+					break;
-+
-+				/* we only support set/clear feature for
-+				 * endpoint */
-+				if (setup->bRequestType == USB_RECIP_ENDPOINT) {
-+					int dir = (wIndex & 0x0080) ?
-+					    EP_DIR_IN : EP_DIR_OUT;
-+					int num = (wIndex & 0x000f);
-+					struct fsl_ep *ep;
-+
-+					if (wValue != 0
-+					    || wLength != 0
-+					    || (num * 2 + dir) > udc->max_ep)
-+						break;
-+					ep = &udc->eps[num * 2 + dir];
-+
-+					if (setup->bRequest ==
-+					    USB_REQ_SET_FEATURE) {
-+						pr_debug("udc: udc: SET_FEATURE"
-+							 " doing set_halt\n");
-+						rc = fsl_ep_set_halt(&ep-> ep,
-+								     1);
-+					} else {
-+						pr_debug("udc: CLEAR_FEATURE"
-+							 " doing clear_halt\n");
-+						rc = fsl_ep_set_halt(&ep-> ep,
-+								     0);
-+					}
-+
-+				} else if (setup->bRequestType ==
-+					   USB_RECIP_DEVICE) {
-+					if (setup->bRequest ==
-+					    USB_REQ_SET_FEATURE) {
-+						ptc = wIndex >> 8;
-+						rc = 0;
-+					}
-+					if (!udc->gadget.is_otg)
-+						break;
-+					else if (setup->bRequest ==
-+						 USB_DEVICE_B_HNP_ENABLE)
-+						udc->gadget.b_hnp_enable = 1;
-+					else if (setup->bRequest ==
-+						 USB_DEVICE_A_HNP_SUPPORT)
-+						udc->gadget.a_hnp_support = 1;
-+					else if (setup->bRequest ==
-+						 USB_DEVICE_A_ALT_HNP_SUPPORT)
-+						udc->gadget.a_alt_hnp_support =
-+						    1;
-+					rc = 0;
-+				}
-+				if (rc == 0) {
-+					/* send status only if
-+					 * fsl_ep_set_halt success */
-+					if (ep0_prime_status(udc, EP_DIR_IN))
-+						ep0stall(udc);
-+				}
-+				break;
-+			}
-+		default:
-+			handled = 0;
-+			break;
-+		}
-+	} else {
-+		/* vendor requests */
-+		handled = 0;
-+	}
-+
-+	if (!handled) {
-+		if (udc->driver->setup(&udc->gadget, &udc->local_setup_buff)
-+		    != 0) {
-+			ep0stall(udc);
-+		} else if (setup->bRequestType & USB_DIR_IN) {
-+			udc->ep0_state = DATA_STATE_XMIT;
-+			pr_debug("udc: ep0_state now DATA_STATE_XMIT\n");
-+		} else {
-+			udc->ep0_state = DATA_STATE_RECV;
-+			pr_debug("udc: ep0_state now DATA_STATE_RECV\n");
-+		}
-+	}
-+
-+	if (ptc) {
-+		tmp =fsl_readl(&dr_regs->portsc1) | ptc << 16;
-+		fsl_writel(tmp, &dr_regs->portsc1);
-+		pr_debug("udc: switch to test mode.\n");
-+	}
-+}
-+
-+/* Process request for Data or Status phase of ep0
-+ * prime status phase if needed */
-+static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0,
-+		struct fsl_req *req)
-+{
-+	if (udc->usb_state == USB_STATE_ADDRESS) {
-+		/* Set the new address */
-+		u32 new_address = (u32) udc->device_address;
-+		fsl_writel(new_address << USB_DEVICE_ADDRESS_BIT_POS,
-+				&dr_regs->deviceaddr);
-+	}
-+
-+	done(ep0, req, 0);
-+
-+	switch (udc->ep0_state) {
-+	case DATA_STATE_XMIT:
-+		/* receive status phase */
-+		if (ep0_prime_status(udc, EP_DIR_OUT))
-+			ep0stall(udc);
-+		break;
-+	case DATA_STATE_RECV:
-+		/* send status phase */
-+		if (ep0_prime_status(udc, EP_DIR_IN))
-+			ep0stall(udc);
-+		break;
-+	case WAIT_FOR_OUT_STATUS:
-+		udc->ep0_state = WAIT_FOR_SETUP;
-+		break;
-+	case WAIT_FOR_SETUP:
-+		ERR("Unexpect ep0 packets \n");
-+		break;
-+	default:
-+		ep0stall(udc);
-+		break;
-+	}
-+}
-+
-+/* Tripwire mechanism to ensure a setup packet payload is extracted without
-+ * being corrupted by another incoming setup packet */
-+static void tripwire_handler(struct fsl_udc *udc, u8 ep_num, u8 *buffer_ptr)
-+{
-+	u32 temp;
-+	struct ep_queue_head *qh;
-+	struct fsl_usb2_platform_data *pdata = udc->pdata;
-+
-+	qh = &udc->ep_qh[ep_num * 2 + EP_DIR_OUT];
-+
-+	/* Clear bit in ENDPTSETUPSTAT */
-+	temp = fsl_readl(&dr_regs->endptsetupstat);
-+	fsl_writel(temp | (1 << ep_num), &dr_regs->endptsetupstat);
-+
-+	/* while a hazard exists when setup package arrives */
-+	do {
-+		/* Set Setup Tripwire */
-+		temp = fsl_readl(&dr_regs->usbcmd);
-+		fsl_writel(temp | USB_CMD_SUTW, &dr_regs->usbcmd);
-+
-+		/* Copy the setup packet to local buffer */
-+		if (pdata->le_setup_buf) {
-+			u32 *p = (u32 *)buffer_ptr;
-+			u32 *s = (u32 *)qh->setup_buffer;
-+			
-+			/* Convert little endian setup buffer to CPU endian */
-+			*p++ = le32_to_cpu(*s++);
-+			*p = le32_to_cpu(*s);
-+		} else {
-+			memcpy(buffer_ptr, (u8 *) qh->setup_buffer, 8);
-+		}
-+	} while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_SUTW));
-+
-+	/* Clear Setup Tripwire */
-+	temp = fsl_readl(&dr_regs->usbcmd);
-+	fsl_writel(temp & ~USB_CMD_SUTW, &dr_regs->usbcmd);
-+}
-+
-+/* process-ep_req(): free the completed Tds for this req */
-+static int process_ep_req(struct fsl_udc *udc, int pipe,
-+		struct fsl_req *curr_req)
-+{
-+	struct ep_td_struct *curr_td;
-+	int	td_complete, actual, remaining_length, j, tmp;
-+	int	status = 0;
-+	int	errors = 0;
-+	struct  ep_queue_head *curr_qh = &udc->ep_qh[pipe];
-+	int direction = pipe % 2;
-+
-+	curr_td = curr_req->head;
-+	td_complete = 0;
-+	actual = curr_req->req.length;
-+
-+	for (j = 0; j < curr_req->dtd_count; j++) {
-+		remaining_length = (hc32_to_cpu(curr_td->size_ioc_sts)
-+					& DTD_PACKET_SIZE)
-+				>> DTD_LENGTH_BIT_POS;
-+		actual -= remaining_length;
-+
-+		(errors = hc32_to_cpu(curr_td->size_ioc_sts) & DTD_ERROR_MASK);
-+		if (errors) {
-+			if (errors & DTD_STATUS_HALTED) {
-+				ERR("dTD error %08x QH=%d\n", errors, pipe);
-+				/* Clear the errors and Halt condition */
-+				tmp = hc32_to_cpu(curr_qh->size_ioc_int_sts);
-+				tmp &= ~errors;
-+				curr_qh->size_ioc_int_sts = cpu_to_hc32(tmp);
-+				status = -EPIPE;
-+				/* FIXME: continue with next queued TD? */
-+
-+				break;
-+			}
-+			if (errors & DTD_STATUS_DATA_BUFF_ERR) {
-+				VDBG("Transfer overflow");
-+				status = -EPROTO;
-+				break;
-+			} else if (errors & DTD_STATUS_TRANSACTION_ERR) {
-+				VDBG("ISO error");
-+				status = -EILSEQ;
-+				break;
-+			} else
-+				ERR("Unknown error has occured (0x%x)!\r\n",
-+					errors);
-+
-+		} else if (hc32_to_cpu(curr_td->size_ioc_sts) &
-+					DTD_STATUS_ACTIVE) {
-+			VDBG("Request not complete");
-+			status = REQ_UNCOMPLETE;
-+			return status;
-+		} else if (remaining_length) {
-+			if (direction) {
-+				VDBG("Transmit dTD remaining length not zero");
-+				status = -EPROTO;
-+				break;
-+			} else {
-+				td_complete++;
-+				break;
-+			}
-+		} else {
-+			td_complete++;
-+			VDBG("dTD transmitted successful ");
-+		}
-+
-+		if (j != curr_req->dtd_count - 1)
-+			curr_td = curr_td->next_td_virt;
-+	}
-+
-+	if (status)
-+		return status;
-+
-+	curr_req->req.actual = actual;
-+
-+	return 0;
-+}
-+
-+/* Process a DTD completion interrupt */
-+static void dtd_complete_irq(struct fsl_udc *udc)
-+{
-+	u32 bit_pos;
-+	int i, ep_num, direction, bit_mask, status;
-+	struct fsl_ep *curr_ep;
-+	struct fsl_req *curr_req, *temp_req;
-+
-+	/* Clear the bits in the register */
-+	bit_pos = fsl_readl(&dr_regs->endptcomplete);
-+	fsl_writel(bit_pos, &dr_regs->endptcomplete);
-+
-+	if (!bit_pos)
-+		return;
-+
-+	for (i = 0; i < udc->max_ep * 2; i++) {
-+		ep_num = i >> 1;
-+		direction = i % 2;
-+
-+		bit_mask = 1 << (ep_num + 16 * direction);
-+
-+		if (!(bit_pos & bit_mask))
-+			continue;
-+
-+		curr_ep = get_ep_by_pipe(udc, i);
-+
-+		/* If the ep is configured */
-+		if (curr_ep->name == NULL) {
-+			WARN("Invalid EP?");
-+			continue;
-+		}
-+
-+		/* process the req queue until an uncomplete request */
-+		list_for_each_entry_safe(curr_req, temp_req, &curr_ep->queue,
-+				queue) {
-+			status = process_ep_req(udc, i, curr_req);
-+
-+			VDBG("status of process_ep_req= %d, ep = %d",
-+					status, ep_num);
-+			if (status == REQ_UNCOMPLETE)
-+				break;
-+			/* write back status to req */
-+			curr_req->req.status = status;
-+
-+			if (ep_num == 0) {
-+				ep0_req_complete(udc, curr_ep, curr_req);
-+				break;
-+			} else {
-+				done(curr_ep, curr_req, status);
-+			}
-+		}
-+	}
-+}
-+
-+/* Process a port change interrupt */
-+static void port_change_irq(struct fsl_udc *udc)
-+{
-+	u32 speed;
-+
-+	VDBG("portsc=0x%x", fsl_readl(&dr_regs->portsc1) );
-+	if (udc->bus_reset)
-+		udc->bus_reset = 0;
-+
-+	/* Bus resetting is finished */
-+	if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) {
-+		/* Get the speed */
-+		speed = fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_SPEED_MASK;
-+		switch (speed) {
-+		case PORTSCX_PORT_SPEED_HIGH:
-+			udc->gadget.speed = USB_SPEED_HIGH;
-+			break;
-+		case PORTSCX_PORT_SPEED_FULL:
-+			udc->gadget.speed = USB_SPEED_FULL;
-+			break;
-+		case PORTSCX_PORT_SPEED_LOW:
-+			udc->gadget.speed = USB_SPEED_LOW;
-+			break;
-+		default:
-+			udc->gadget.speed = USB_SPEED_UNKNOWN;
-+			break;
-+		}
-+	}
-+
-+	/* Update USB state */
-+	if (!udc->resume_state)
-+		udc->usb_state = USB_STATE_DEFAULT;
-+}
-+
-+/* Process suspend interrupt */
-+static void suspend_irq(struct fsl_udc *udc)
-+{
-+	udc->resume_state = udc->usb_state;
-+	udc->usb_state = USB_STATE_SUSPENDED;
-+
-+	/* report suspend to the driver, serial.c does not support this */
-+	if (udc->driver->suspend)
-+		udc->driver->suspend(&udc->gadget);
-+}
-+
-+static void bus_resume(struct fsl_udc *udc)
-+{
-+	udc->usb_state = udc->resume_state;
-+	udc->resume_state = 0;
-+
-+	/* report resume to the driver, serial.c does not support this */
-+	if (udc->driver->resume)
-+		udc->driver->resume(&udc->gadget);
-+}
-+
-+/* Clear up all ep queues */
-+static int reset_queues(struct fsl_udc *udc)
-+{
-+	u8 pipe;
-+
-+	for (pipe = 0; pipe < udc->max_pipes; pipe++)
-+		udc_reset_ep_queue(udc, pipe);
-+
-+	/* report disconnect; the driver is already quiesced */
-+	udc->driver->disconnect(&udc->gadget);
-+
-+	return 0;
-+}
-+
-+/* Process reset interrupt */
-+static void reset_irq(struct fsl_udc *udc)
-+{
-+	u32 temp;
-+	unsigned long timeout;
-+
-+	/* Clear the device address */
-+	temp = fsl_readl(&dr_regs->deviceaddr);
-+	fsl_writel(temp & ~USB_DEVICE_ADDRESS_MASK, &dr_regs->deviceaddr);
-+
-+	udc->device_address = 0;
-+
-+	/* Clear usb state */
-+	udc->resume_state = 0;
-+	udc->ep0_dir = 0;
-+	udc->ep0_state = WAIT_FOR_SETUP;
-+	udc->remote_wakeup = 0;	/* default to 0 on reset */
-+	udc->gadget.b_hnp_enable = 0;
-+	udc->gadget.a_hnp_support = 0;
-+	udc->gadget.a_alt_hnp_support = 0;
-+
-+	/* Clear all the setup token semaphores */
-+	temp = fsl_readl(&dr_regs->endptsetupstat);
-+	fsl_writel(temp, &dr_regs->endptsetupstat);
-+
-+	/* Clear all the endpoint complete status bits */
-+	temp = fsl_readl(&dr_regs->endptcomplete);
-+	fsl_writel(temp, &dr_regs->endptcomplete);
-+
-+	timeout = jiffies + 100;
-+	while (fsl_readl(&dr_regs->endpointprime)) {
-+		/* Wait until all endptprime bits cleared */
-+		if (time_after(jiffies, timeout)) {
-+			ERR("Timeout for reset\n");
-+			break;
-+		}
-+		cpu_relax();
-+	}
-+
-+	/* Write 1s to the flush register */
-+	fsl_writel(0xffffffff, &dr_regs->endptflush);
-+
-+	if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) {
-+		VDBG("Bus reset");
-+		/* Bus is reseting */
-+		udc->bus_reset = 1;
-+		/* Reset all the queues, include XD, dTD, EP queue
-+		 * head and TR Queue */
-+		reset_queues(udc);
-+		udc->usb_state = USB_STATE_DEFAULT;
-+	} else {
-+		VDBG("Controller reset");
-+		/* initialize usb hw reg except for regs for EP, not
-+		 * touch usbintr reg */
-+		dr_controller_setup(udc);
-+
-+		/* Reset all internal used Queues */
-+		reset_queues(udc);
-+
-+		ep0_setup(udc);
-+
-+		/* Enable DR IRQ reg, Set Run bit, change udc state */
-+		dr_controller_run(udc);
-+		udc->usb_state = USB_STATE_ATTACHED;
-+	}
-+}
-+
-+/*
-+ * USB device controller interrupt handler
-+ */
-+static irqreturn_t fsl_udc_irq(int irq, void *_udc)
-+{
-+	struct fsl_udc *udc = _udc;
-+	u32 irq_src;
-+	irqreturn_t status = IRQ_NONE;
-+	unsigned long flags;
-+
-+	/* Disable ISR for OTG host mode */
-+	if (udc->stopped)
-+		return IRQ_NONE;
-+	spin_lock_irqsave(&udc->lock, flags);
-+	irq_src = fsl_readl(&dr_regs->usbsts) & fsl_readl(&dr_regs->usbintr);
-+	/* Clear notification bits */
-+	fsl_writel(irq_src, &dr_regs->usbsts);
-+
-+	VDBG("irq_src [0x%8x]  portsc=0x%x", irq_src,
-+	     fsl_readl(&dr_regs->portsc1));
-+
-+	/* Need to resume? */
-+	if (udc->usb_state == USB_STATE_SUSPENDED)
-+		if ((fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_SUSPEND) == 0)
-+			bus_resume(udc);
-+
-+	/* USB Interrupt */
-+	if (irq_src & USB_STS_INT) {
-+		VDBG("Packet int");
-+		/* Setup package, we only support ep0 as control ep */
-+		if (fsl_readl(&dr_regs->endptsetupstat) & EP_SETUP_STATUS_EP0) {
-+			tripwire_handler(udc, 0,
-+					(u8 *) (&udc->local_setup_buff));
-+			setup_received_irq(udc, &udc->local_setup_buff);
-+			status = IRQ_HANDLED;
-+		}
-+
-+		/* completion of dtd */
-+		if (fsl_readl(&dr_regs->endptcomplete)) {
-+			dtd_complete_irq(udc);
-+			status = IRQ_HANDLED;
-+		}
-+	}
-+
-+	/* SOF (for ISO transfer) */
-+	if (irq_src & USB_STS_SOF) {
-+		status = IRQ_HANDLED;
-+	}
-+
-+	/* Port Change */
-+	if (irq_src & USB_STS_PORT_CHANGE) {
-+		port_change_irq(udc);
-+		status = IRQ_HANDLED;
-+	}
-+
-+	/* Reset Received */
-+	if (irq_src & USB_STS_RESET) {
-+		reset_irq(udc);
-+		status = IRQ_HANDLED;
-+	}
-+
-+	/* Sleep Enable (Suspend) */
-+	if (irq_src & USB_STS_SUSPEND) {
-+		suspend_irq(udc);
-+		status = IRQ_HANDLED;
-+	}
-+
-+	if (irq_src & (USB_STS_ERR | USB_STS_SYS_ERR)) {
-+		VDBG("Error IRQ %x ", irq_src);
-+	}
-+
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+	return status;
-+}
-+
-+/*----------------------------------------------------------------*
-+ * Hook to gadget drivers
-+ * Called by initialization code of gadget drivers
-+*----------------------------------------------------------------*/
-+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
-+{
-+	int retval = -ENODEV;
-+	unsigned long flags = 0;
-+	struct fsl_udc *udc = udc_controller;
-+
-+	pr_debug("udc: udc=0x%p\n", udc);
-+
-+	if (!udc)
-+		return -ENODEV;
-+
-+	if (!driver || (driver->speed != USB_SPEED_FULL
-+			&& driver->speed != USB_SPEED_HIGH)
-+			|| !driver->bind || !driver->disconnect
-+			|| !driver->setup)
-+		return -EINVAL;
-+
-+	if (udc->driver)
-+		return -EBUSY;
-+
-+	/* lock is needed but whether should use this lock or another */
-+	spin_lock_irqsave(&udc->lock, flags);
-+
-+	driver->driver.bus = 0;
-+	udc->softconnect = 1;
-+	/* hook up the driver */
-+	udc->driver = driver;
-+	udc->gadget.dev.driver = &driver->driver;
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	/* bind udc driver to gadget driver */
-+	retval = driver->bind(&udc->gadget);
-+	if (retval) {
-+		pr_debug("bind to %s --> %d\n", driver->driver.name, retval);
-+		udc->gadget.dev.driver = 0;
-+		udc->driver = 0;
-+		goto out;
-+	}
-+
-+	/* Enable DR IRQ reg and Set usbcmd reg  Run bit */
-+	if (udc->transceiver) {
-+		/* Suspend the controller until OTG enables it */
-+		udc_suspend(udc);
-+		pr_debug("udc: suspend udc for OTG auto detect \n");
-+
-+		/* Export udc suspend/resume call to OTG */
-+		udc->gadget.dev.parent->driver->suspend = fsl_udc_suspend;
-+		udc->gadget.dev.parent->driver->resume = fsl_udc_resume;
-+
-+		retval = otg_set_peripheral(udc->transceiver, &udc->gadget);
-+		if (retval < 0) {
-+			printk(KERN_ERR "can't bind to transceiver\n");
-+			driver->unbind(&udc->gadget);
-+			udc->gadget.dev.driver = 0;
-+			udc->driver = 0;
-+			return retval;
-+		}
-+	} else {
-+		/* Enable DR IRQ reg and Set usbcmd reg  Run bit */
-+		dr_controller_run(udc);
-+		udc->usb_state = USB_STATE_ATTACHED;
-+		udc->ep0_state = WAIT_FOR_SETUP;
-+		pr_debug("udc: ep0_state now WAIT_FOR_SETUP\n");
-+		udc->ep0_dir = 0;
-+	}
-+
-+	printk(KERN_INFO "%s: bind to driver %s \n", udc->gadget.name,
-+		driver->driver.name);
-+
-+out:
-+	return retval;
-+}
-+EXPORT_SYMBOL(usb_gadget_register_driver);
-+
-+/* Disconnect from gadget driver */
-+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-+{
-+	struct fsl_ep *loop_ep;
-+	unsigned long flags;
-+
-+	if (!udc_controller)
-+		return -ENODEV;
-+
-+	if (!driver || driver != udc_controller->driver || !driver->unbind)
-+		return -EINVAL;
-+
-+#ifdef CONFIG_USB_OTG
-+	if (udc_controller->transceiver)
-+		(void)otg_set_peripheral(udc_controller->transceiver, 0);
-+#endif
-+
-+	/* stop DR, disable intr */
-+	dr_controller_stop(udc_controller);
-+
-+	/* in fact, no needed */
-+	udc_controller->usb_state = USB_STATE_ATTACHED;
-+	udc_controller->ep0_state = WAIT_FOR_SETUP;
-+	udc_controller->ep0_dir = 0;
-+
-+	/* stand operation */
-+	spin_lock_irqsave(&udc_controller->lock, flags);
-+	udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
-+	nuke(&udc_controller->eps[0], -ESHUTDOWN);
-+	list_for_each_entry(loop_ep, &udc_controller->gadget.ep_list,
-+			ep.ep_list)
-+		nuke(loop_ep, -ESHUTDOWN);
-+	spin_unlock_irqrestore(&udc_controller->lock, flags);
-+
-+	/* unbind gadget and unhook driver. */
-+	driver->unbind(&udc_controller->gadget);
-+	udc_controller->gadget.dev.driver = 0;
-+	udc_controller->driver = 0;
-+
-+	printk(KERN_INFO "unregistered gadget '%s'\n", driver->driver.name);
-+	return 0;
-+}
-+EXPORT_SYMBOL(usb_gadget_unregister_driver);
-+
-+/*-------------------------------------------------------------------------
-+		PROC File System Support
-+-------------------------------------------------------------------------*/
-+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
-+
-+#include <linux/seq_file.h>
-+
-+static const char proc_filename[] = "driver/fsl_usb2_udc";
-+
-+static int fsl_proc_read(char *page, char **start, off_t off, int count,
-+		int *eof, void *_dev)
-+{
-+	char *buf = page;
-+	char *next = buf;
-+	unsigned size = count;
-+	unsigned long flags;
-+	int t, i;
-+	u32 tmp_reg;
-+	struct fsl_ep *ep = NULL;
-+	struct fsl_req *req;
-+
-+	struct fsl_udc *udc = udc_controller;
-+	if (off != 0)
-+		return 0;
-+
-+	spin_lock_irqsave(&udc->lock, flags);
-+
-+	/* ------basic driver infomation ---- */
-+	t = scnprintf(next, size,
-+			DRIVER_DESC "\n"
-+			"%s version: %s\n"
-+			"Gadget driver: %s\n\n",
-+			driver_name, DRIVER_VERSION,
-+			udc->driver ? udc->driver->driver.name : "(none)");
-+	size -= t;
-+	next += t;
-+
-+	/* ------ DR Registers ----- */
-+	tmp_reg = fsl_readl(&dr_regs->usbcmd);
-+	t = scnprintf(next, size,
-+			"USBCMD reg: 0x%08x\n"
-+			"\tSetupTW: %d\n"
-+			"\tRun/Stop: %s\n\n",
-+			tmp_reg,
-+			(tmp_reg & USB_CMD_SUTW) ? 1 : 0,
-+			(tmp_reg & USB_CMD_RUN_STOP) ? "Run" : "Stop");
-+	size -= t;
-+	next += t;
-+
-+	tmp_reg = fsl_readl(&dr_regs->usbsts);
-+	t = scnprintf(next, size,
-+			"USB Status Reg: 0x%08x\n"
-+			"\tDr Suspend: %d   Reset Received: %d   "
-+			"System Error: %s  USB Error Interrupt: %s\n\n",
-+			tmp_reg,
-+			(tmp_reg & USB_STS_SUSPEND) ? 1 : 0,
-+			(tmp_reg & USB_STS_RESET) ? 1 : 0,
-+			(tmp_reg & USB_STS_SYS_ERR) ? "Err" : "Normal",
-+			(tmp_reg & USB_STS_ERR) ? "Err detected" : "No err");
-+	size -= t;
-+	next += t;
-+
-+	tmp_reg = fsl_readl(&dr_regs->usbintr);
-+	t = scnprintf(next, size,
-+			"USB Interrupt Enable Reg: 0x%08x\n"
-+			"\tSleep Enable: %d   SOF Received Enable: %d  "
-+			"Reset Enable: %d\n"
-+			"\tSystem Error Enable: %d  "
-+			"Port Change Dectected Enable: %d\n"
-+			"\tUSB Error Intr Enable: %d  USB Intr Enable: %d\n\n",
-+			tmp_reg,
-+			(tmp_reg & USB_INTR_DEVICE_SUSPEND) ? 1 : 0,
-+			(tmp_reg & USB_INTR_SOF_EN) ? 1 : 0,
-+			(tmp_reg & USB_INTR_RESET_EN) ? 1 : 0,
-+			(tmp_reg & USB_INTR_SYS_ERR_EN) ? 1 : 0,
-+			(tmp_reg & USB_INTR_PTC_DETECT_EN) ? 1 : 0,
-+			(tmp_reg & USB_INTR_ERR_INT_EN) ? 1 : 0,
-+			(tmp_reg & USB_INTR_INT_EN) ? 1 : 0);
-+	size -= t;
-+	next += t;
-+
-+	tmp_reg = fsl_readl(&dr_regs->frindex);
-+	t = scnprintf(next, size,
-+			"USB Frame Index Reg:  Frame Number is 0x%x\n\n",
-+			(tmp_reg & USB_FRINDEX_MASKS));
-+	size -= t;
-+	next += t;
-+
-+	tmp_reg = fsl_readl(&dr_regs->deviceaddr);
-+	t = scnprintf(next, size,
-+			"USB Device Address Reg:  Device Addr is 0x%x\n\n",
-+			(tmp_reg & USB_DEVICE_ADDRESS_MASK));
-+	size -= t;
-+	next += t;
-+
-+	tmp_reg = fsl_readl(&dr_regs->endpointlistaddr);
-+	t = scnprintf(next, size,
-+			"USB Endpoint List Address Reg:"
-+			"Device Addr is 0x%x\n\n",
-+			(tmp_reg & USB_EP_LIST_ADDRESS_MASK));
-+	size -= t;
-+	next += t;
-+
-+	tmp_reg = fsl_readl(&dr_regs->portsc1);
-+	t = scnprintf(next, size,
-+		"USB Port Status&Control Reg:\n"
-+		"\tPort Transceiver Type : %s" "Port Speed: %s \n"
-+		"\tPHY Low Power Suspend: %s" "Port Reset: %s  "
-+		"Port Suspend Mode: %s \n" "\tOver-current Change: %s  "
-+		"Port Enable/Disable Change: %s\n"
-+		"\tPort Enabled/Disabled: %s"
-+		"Current Connect Status: %s\n\n", ( {
-+			char *s;
-+			switch (tmp_reg & PORTSCX_PTS_FSLS) {
-+			case PORTSCX_PTS_UTMI:
-+				s = "UTMI"; break;
-+			case PORTSCX_PTS_ULPI:
-+				s = "ULPI "; break;
-+			case PORTSCX_PTS_FSLS:
-+				s = "FS/LS Serial"; break;
-+			default:
-+				s = "None"; break;
-+			}
-+			s; } ), ( {
-+			char *s;
-+			switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) {
-+			case PORTSCX_PORT_SPEED_FULL:
-+				s = "Full Speed"; break;
-+			case PORTSCX_PORT_SPEED_LOW:
-+				s = "Low Speed"; break;
-+			case PORTSCX_PORT_SPEED_HIGH:
-+				s = "High Speed"; break;
-+			default:
-+				s = "Undefined"; break;
-+			}
-+			s;
-+		} ),
-+		(tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ?
-+		"Normal PHY mode" : "Low power mode",
-+		(tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" :
-+		"Not in Reset",
-+		(tmp_reg & PORTSCX_PORT_SUSPEND) ? "In " : "Not in",
-+		(tmp_reg & PORTSCX_OVER_CURRENT_CHG) ? "Dected" :
-+		"No",
-+		(tmp_reg & PORTSCX_PORT_EN_DIS_CHANGE) ? "Disable" :
-+		"Not change",
-+		(tmp_reg & PORTSCX_PORT_ENABLE) ? "Enable" :
-+		"Not correct",
-+		(tmp_reg & PORTSCX_CURRENT_CONNECT_STATUS) ?
-+		"Attached" : "Not-Att");
-+	size -= t;
-+	next += t;
-+
-+	tmp_reg = fsl_readl(&dr_regs->usbmode);
-+	t = scnprintf(next, size,
-+			"USB Mode Reg:" "Controller Mode is : %s\n\n", ( {
-+				char *s;
-+				switch (tmp_reg & USB_MODE_CTRL_MODE_HOST) {
-+				case USB_MODE_CTRL_MODE_IDLE:
-+					s = "Idle"; break;
-+				case USB_MODE_CTRL_MODE_DEVICE:
-+					s = "Device Controller"; break;
-+				case USB_MODE_CTRL_MODE_HOST:
-+					s = "Host Controller"; break;
-+				default:
-+					s = "None"; break;
-+				}
-+				s;
-+			} ));
-+	size -= t;
-+	next += t;
-+
-+	tmp_reg = fsl_readl(&dr_regs->endptsetupstat);
-+	t = scnprintf(next, size,
-+			"Endpoint Setup Status Reg:" "SETUP on ep 0x%x\n\n",
-+			(tmp_reg & EP_SETUP_STATUS_MASK));
-+	size -= t;
-+	next += t;
-+
-+	for (i = 0; i < udc->max_ep / 2; i++) {
-+		tmp_reg = fsl_readl(&dr_regs->endptctrl[i]);
-+		t = scnprintf(next, size, "EP Ctrl Reg [0x%x]: = [0x%x]\n",
-+				i, tmp_reg);
-+		size -= t;
-+		next += t;
-+	}
-+	tmp_reg = fsl_readl(&dr_regs->endpointprime);
-+	t = scnprintf(next, size, "EP Prime Reg = [0x%x]\n", tmp_reg);
-+	size -= t;
-+	next += t;
-+
-+#ifdef HAVE_SYS_REGS
-+	tmp_reg = usb_sys_regs->snoop1;
-+	t = scnprintf(next, size, "\nSnoop1 Reg : = [0x%x]\n\n", tmp_reg);
-+	size -= t;
-+	next += t;
-+
-+	tmp_reg = usb_sys_regs->control;
-+	t = scnprintf(next, size, "General Control Reg : = [0x%x]\n\n",
-+			tmp_reg);
-+	size -= t;
-+	next += t;
-+#endif
-+
-+	/* ------fsl_udc, fsl_ep, fsl_request structure information ----- */
-+	ep = &udc->eps[0];
-+	t = scnprintf(next, size, "For %s Maxpkt is 0x%x index is 0x%x\n",
-+			ep->ep.name, ep_maxpacket(ep), ep_index(ep));
-+	size -= t;
-+	next += t;
-+
-+	if (list_empty(&ep->queue)) {
-+		t = scnprintf(next, size, "its req queue is empty\n\n");
-+		size -= t;
-+		next += t;
-+	} else {
-+		list_for_each_entry(req, &ep->queue, queue) {
-+			t = scnprintf(next, size,
-+				"req %p actual 0x%x length 0x%x  buf %p\n",
-+				&req->req, req->req.actual,
-+				req->req.length, req->req.buf);
-+			size -= t;
-+			next += t;
-+		}
-+	}
-+	/* other gadget->eplist ep */
-+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
-+		if (ep->desc) {
-+			t = scnprintf(next, size,
-+					"\nFor %s Maxpkt is 0x%x "
-+					"index is 0x%x\n",
-+					ep->ep.name, ep_maxpacket(ep),
-+					ep_index(ep));
-+			size -= t;
-+			next += t;
-+
-+			if (list_empty(&ep->queue)) {
-+				t = scnprintf(next, size,
-+						"its req queue is empty\n\n");
-+				size -= t;
-+				next += t;
-+			} else {
-+				list_for_each_entry(req, &ep->queue, queue) {
-+					t = scnprintf(next, size,
-+						"req %p actual 0x%x length"
-+						"0x%x  buf %p\n",
-+						&req->req, req->req.actual,
-+						req->req.length, req->req.buf);
-+					size -= t;
-+					next += t;
-+					} /* end for each_entry of ep req */
-+				}	/* end for else */
-+			}	/* end for if(ep->queue) */
-+		}		/* end (ep->desc) */
-+
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	*eof = 1;
-+	return count - size;
-+}
-+
-+#define create_proc_file()	create_proc_read_entry(proc_filename, \
-+				0, NULL, fsl_proc_read, NULL)
-+
-+#define remove_proc_file()	remove_proc_entry(proc_filename, NULL)
-+
-+#else				/* !CONFIG_USB_GADGET_DEBUG_FILES */
-+
-+#define create_proc_file()	do {} while (0)
-+#define remove_proc_file()	do {} while (0)
-+
-+#endif				/* CONFIG_USB_GADGET_DEBUG_FILES */
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* Release udc structures */
-+static void fsl_udc_release(struct device *dev)
-+{
-+	complete(udc_controller->done);
-+	dma_free_coherent(dev, udc_controller->ep_qh_size,
-+			udc_controller->ep_qh, udc_controller->ep_qh_dma);
-+	kfree(udc_controller);
-+}
-+
-+/******************************************************************
-+	Internal structure setup functions
-+*******************************************************************/
-+/*------------------------------------------------------------------
-+ * init resource for globle controller
-+ * Return the udc handle on success or NULL on failure
-+ ------------------------------------------------------------------*/
-+static struct fsl_udc *__init struct_udc_setup(struct platform_device *pdev)
-+{
-+	struct fsl_udc *udc;
-+	struct fsl_usb2_platform_data *pdata;
-+	size_t size;
-+
-+	udc = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
-+	if (udc == NULL) {
-+		ERR("malloc udc failed\n");
-+		return NULL;
-+	}
-+
-+	pdata = pdev->dev.platform_data;
-+	udc->phy_mode = pdata->phy_mode;	/* DDD FIXME */
-+
-+	/* max_ep_nr is bidirectional ep number, max_ep doubles the number */
-+	udc->max_ep = pdata->max_ep_nr * 2;
-+
-+	udc->eps = kzalloc(sizeof(struct fsl_ep) * udc->max_ep, GFP_KERNEL);
-+	if (!udc->eps) {
-+		ERR("malloc fsl_ep failed\n");
-+		goto cleanup;
-+	}
-+
-+	/* initialized QHs, take care of alignment */
-+	size = udc->max_ep * sizeof(struct ep_queue_head);
-+	if (size < QH_ALIGNMENT)
-+		size = QH_ALIGNMENT;
-+	else if ((size % QH_ALIGNMENT) != 0) {
-+		size += QH_ALIGNMENT + 1;
-+		size &= ~(QH_ALIGNMENT - 1);
-+	}
-+	udc->ep_qh = dma_alloc_coherent(&pdev->dev, size,
-+					&udc->ep_qh_dma, GFP_KERNEL);
-+	if (!udc->ep_qh) {
-+		ERR("malloc QHs for udc failed\n");
-+		kfree(udc->eps);
-+		goto cleanup;
-+	}
-+
-+	udc->ep_qh_size = size;
-+
-+	/* Initialize ep0 status request structure */
-+	udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL),
-+			struct fsl_req, req);
-+	/* allocate a small amount of memory to get valid address */
-+	udc->status_req->req.buf = kmalloc(8, GFP_KERNEL);
-+	udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf);
-+
-+	udc->resume_state = USB_STATE_NOTATTACHED;
-+	udc->usb_state = USB_STATE_POWERED;
-+	udc->ep0_dir = 0;
-+	udc->remote_wakeup = 0;	/* default to 0 on reset */
-+	spin_lock_init(&udc->lock);
-+
-+	return udc;
-+
-+cleanup:
-+	kfree(udc);
-+	return NULL;
-+}
-+
-+/*----------------------------------------------------------------
-+ * Setup the fsl_ep struct for eps
-+ * Link fsl_ep->ep to gadget->ep_list
-+ * ep0out is not used so do nothing here
-+ * ep0in should be taken care
-+ *--------------------------------------------------------------*/
-+static int __init struct_ep_setup(struct fsl_udc *udc, unsigned char index,
-+		char *name, int link)
-+{
-+	struct fsl_ep *ep = &udc->eps[index];
-+
-+	ep->udc = udc;
-+	strcpy(ep->name, name);
-+	ep->ep.name = ep->name;
-+
-+	ep->ep.ops = &fsl_ep_ops;
-+	ep->stopped = 0;
-+
-+	/* for ep0: maxP defined in desc
-+	 * for other eps, maxP is set by epautoconfig() called by gadget layer
-+	 */
-+	ep->ep.maxpacket = (unsigned short) ~0;
-+
-+	/* the queue lists any req for this ep */
-+	INIT_LIST_HEAD(&ep->queue);
-+
-+	/* gagdet.ep_list used for ep_autoconfig so no ep0 */
-+	if (link)
-+		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
-+	ep->gadget = &udc->gadget;
-+	ep->qh = &udc->ep_qh[index];
-+
-+	return 0;
-+}
-+
-+static int board_init(struct platform_device *pdev)
-+{
-+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+
-+	pr_debug("udc: pdev=0x%p  pdata=0x%p\n", pdev, pdata);
-+
-+	/*
-+	 * do platform specific init: check the clock, grab/config pins, etc.
-+	 */
-+	if (pdata->platform_init && pdata->platform_init(pdev) != 0)
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+/* Driver probe functions */
-+
-+static int __init fsl_udc_probe(struct platform_device *pdev)
-+{
-+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+	struct fsl_udc *udc;
-+	unsigned int i;
-+	struct otg_transceiver *transceiver = NULL;
-+	int status = -ENODEV;
-+	u32 id;
-+	int irq_number;
-+	u64 rsrc_start, rsrc_len;
-+	int ret = -ENODEV;
-+
-+	pr_debug("udc: pdev=0x%p  pdata=0x%p\n", pdev, pdata);
-+
-+	if (board_init(pdev) != 0)
-+		return -EINVAL;
-+
-+	/* Initialize the udc structure including QH member and other member */
-+	udc = (struct fsl_udc *) struct_udc_setup(pdev);
-+	udc_controller = udc;
-+
-+	if (!udc) {
-+		ERR("udc is NULL \n");
-+		return -ENOMEM;
-+	}
-+	dev_set_drvdata(&pdev->dev, udc);
-+	pr_debug("udc_controller=0x%p", udc_controller);
-+
-+	udc->pdata = pdata;
-+	udc->xcvr_type = pdata->xcvr_type;
-+
-+#ifdef CONFIG_USB_OTG
-+	udc->transceiver = otg_get_transceiver();
-+	pr_debug("udc: otg_get_transceiver returns 0x%p", udc->transceiver);
-+#endif
-+
-+	if (pdev->resource[1].flags != IORESOURCE_IRQ)
-+		return -ENODEV;
-+
-+	rsrc_start = pdev->resource[0].start;
-+	rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
-+
-+	pr_debug("     start=0x%ux   end=0x%ux\n",
-+		 pdev->resource[0].start, pdev->resource[0].end);
-+	pr_debug("rsrc_start=0x%llx  rsrc_len=0x%llx\n", rsrc_start, rsrc_len);
-+
-+	dr_regs = (struct fsl_usb_device_regs *)pdata->regs;
-+
-+	pr_debug("udc: pdate=0x%p dr_regs=0x%p\n", pdata, dr_regs);
-+	pr_debug("udc: hci_version=0x%x\n", dr_regs->hciversion);
-+	pr_debug("udc: otgsc at 0x%p\n", &dr_regs->otgsc);
-+
-+	id = fsl_readl(&dr_regs->id);
-+	printk(KERN_INFO "FSL2 USBOTG h/w ID=0x%x  revision=0x%x\n",
-+	       id & 0x3f, id >> 16);
-+
-+	/* USB OTG module IRQ */
-+	irq_number = platform_get_irq(pdev, 0);
-+	if (irq_number > 128) {
-+		status = request_irq(irq_number, fsl_udc_irq, IRQF_SHARED,
-+				     driver_name, udc);
-+		if (status) {
-+			ERR("can't get irq %d, err=%d\n", irq_number, status);
-+			goto err2;
-+		}
-+	} else {
-+		status = -ENODEV;
-+		goto err2;
-+	}
-+
-+	if (!udc->transceiver) {
-+		/* initialize usb hw reg except for regs for EP,
-+		 * leave usbintr reg untouched*/
-+		dr_controller_setup(udc);
-+	}
-+
-+	/* here comes the stand operations for probe
-+	 * set the fsl_udc->gadget.xxx
-+	 */
-+	udc->gadget.ops = &fsl_gadget_ops;
-+	udc->gadget.is_dualspeed = 1;
-+
-+	/* gadget.ep0 is a pointer */
-+	udc->gadget.ep0 = &udc->eps[0].ep;
-+	INIT_LIST_HEAD(&udc->gadget.ep_list);
-+	udc->gadget.speed = USB_SPEED_UNKNOWN;
-+	udc->gadget.name = driver_name;
-+
-+	/* Setup gadget.dev and register with kernel */
-+	strcpy(udc->gadget.dev.bus_id, "gadget");
-+	udc->gadget.dev.release = fsl_udc_release;
-+	udc->gadget.dev.parent = &pdev->dev;
-+
-+	ret = device_register(&udc->gadget.dev);
-+	if (ret < 0)
-+		goto err3;
-+
-+	if (udc->transceiver)
-+		udc->gadget.is_otg = 1;
-+
-+	/* setup QH and epctrl for ep0 */
-+	ep0_setup(udc);
-+
-+	/* setup udc->eps[] for ep0 */
-+	struct_ep_setup(udc_controller, 0, "ep0", 0);
-+	/* for ep0: the desc defined here;
-+	 * for other eps, gadget layer called ep_enable with defined desc
-+	 */
-+	udc->eps[0].desc = &fsl_ep0_desc;
-+	udc->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD;
-+
-+	/* setup the udc->eps[] for non-control endpoints and link
-+	 * to gadget.ep_list */
-+	for (i = 1; i < (int)(udc->max_ep / 2); i++) {
-+		char name[14];
-+
-+		sprintf(name, "ep%dout", i);
-+		struct_ep_setup(udc, i * 2, name, 1);
-+		sprintf(name, "ep%din", i);
-+		struct_ep_setup(udc, i * 2 + 1, name, 1);
-+	}
-+
-+	/* use dma_pool for TD management */
-+	udc_controller->td_pool = dma_pool_create("udc_td", &pdev->dev,
-+			sizeof(struct ep_td_struct),
-+			DTD_ALIGNMENT, UDC_DMA_BOUNDARY);
-+	if (udc->td_pool == NULL) {
-+		ret = -ENOMEM;
-+		goto err4;
-+	}
-+
-+	create_proc_file();
-+	return 0;
-+
-+err4:
-+	device_unregister(&udc_controller->gadget.dev);
-+err3:
-+	free_irq(udc_controller->irq, udc_controller);
-+err2:
-+	kfree(udc);
-+	if (transceiver)
-+		put_device(transceiver->dev);
-+	release_mem_region(pdev->resource[0].start,
-+			   pdev->resource[0].end - pdev->resource[0].start + 1);
-+	return status;
-+
-+}
-+
-+/* Driver removal functions
-+ * Free resources
-+ * Finish pending transaction
-+ */
-+static int __exit fsl_udc_remove(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct fsl_udc *udc = (struct fsl_udc *)dev_get_drvdata(dev);
-+	struct fsl_usb2_platform_data *pdata;
-+	int irq_number;
-+
-+	DECLARE_COMPLETION(done);
-+
-+	pdata = pdev->dev.platform_data;
-+
-+	if (!udc)
-+		return -ENODEV;
-+
-+	udc->done = &done;
-+
-+	/* DR has been stopped in usb_gadget_unregister_driver() */
-+
-+	if (udc->transceiver) {
-+		put_device(udc->transceiver->dev);
-+		udc->transceiver = NULL;
-+	}
-+
-+	/* remove proc */
-+	remove_proc_file();
-+
-+	/* free irq */
-+	irq_number = udc->irq;
-+	free_irq(pdev->resource[1].start, udc);
-+	udc->irq = 0;
-+
-+	/* Free allocated memory */
-+	kfree(udc->status_req->req.buf);
-+	kfree(udc->status_req);
-+	kfree(udc_controller->eps);
-+
-+	dma_pool_destroy(udc_controller->td_pool);
-+	/* deinitlaize all ep: strcut */
-+	/* deinitialize ep0: reg and QH */
-+
-+	device_unregister(&udc->gadget.dev);
-+	/* free udc --wait for the release() finished */
-+	wait_for_completion(&done);
-+
-+	/*
-+	 * do platform specific un-initialization:
-+	 * release iomux pins, etc.
-+	 */
-+	if (pdata->platform_uninit)
-+		pdata->platform_uninit(pdev);
-+
-+	return 0;
-+}
-+
-+static int udc_suspend(struct fsl_udc *udc)
-+{
-+	udc->stopped = 1;
-+	return 0;
-+}
-+
-+/*
-+ * Modify Power management attributes
-+ * Used by OTG statemachine to disable gadget temporarily
-+ * Here we stop the DR controller and disable the irq
-+ * @param dev device controller pointer
-+ * @param state current state
-+ * @return The function returns 0 on success or -1 if failed
-+ */
-+static int fsl_udc_suspend(struct device *dev, pm_message_t state)
-+{
-+	struct fsl_udc *udc = (struct fsl_udc *)dev_get_drvdata(dev);
-+	pr_debug("udc: Suspend. state=%d\n", state.event);
-+	return udc_suspend(udc);
-+}
-+
-+static int udc_resume(struct fsl_udc *udc)
-+{
-+	/*Enable DR irq reg and set controller Run */
-+	if (udc->stopped) {
-+		dr_controller_setup(udc);
-+		dr_controller_run(udc);
-+	}
-+	udc->usb_state = USB_STATE_ATTACHED;
-+	udc->ep0_state = WAIT_FOR_SETUP;
-+	udc->ep0_dir = 0;
-+	return 0;
-+}
-+
-+/*
-+ * Invoked on USB resume. May be called in_interrupt.
-+ * Here we start the DR controller and enable the irq
-+ * @param dev device controller pointer
-+ * @return The function returns 0 on success or -1 if failed
-+ */
-+static int fsl_udc_resume(struct device *dev)
-+{
-+	struct fsl_udc *udc = (struct fsl_udc *)dev_get_drvdata(dev);
-+	pr_debug("udc: Resume dev=0x%p udc=0x%p\n", dev, udc);
-+
-+	return udc_resume(udc);
-+}
-+
-+/*-------------------------------------------------------------------------
-+	Register entry point for the peripheral controller driver
-+--------------------------------------------------------------------------*/
-+static struct platform_driver udc_driver = {
-+	.probe   = fsl_udc_probe,
-+	.remove  = __exit_p(fsl_udc_remove),
-+	.driver  = {
-+		.name = (char *)driver_name,
-+		.owner = THIS_MODULE,
-+	},
-+};
-+
-+static int __init udc_init(void)
-+{
-+	printk(KERN_INFO "%s version %s init \n", driver_desc, DRIVER_VERSION);
-+	return platform_driver_register(&udc_driver);
-+}
-+
-+module_init(udc_init);
-+
-+static void __exit udc_exit(void)
-+{
-+	platform_driver_unregister(&udc_driver);
-+	printk(KERN_INFO "%s unregistered \n", driver_desc);
-+}
-+
-+module_exit(udc_exit);
-+
-+MODULE_DESCRIPTION(DRIVER_DESC);
-+MODULE_AUTHOR(DRIVER_AUTHOR);
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/usb/host/ehci-arc.c
-@@ -0,0 +1,436 @@
-+/*
-+ * drivers/usb/host/ehci-arc.c
-+ *
-+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+
-+/*
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/* Note: this file is #included by ehci-hcd.c */
-+
-+#include <linux/platform_device.h>
-+#include <linux/usb/fsl_usb2.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/usb/otg.h>
-+
-+#include "ehci-fsl.h"
-+
-+
-+/* FIXME: Power Managment is un-ported so temporarily disable it */
-+#undef CONFIG_PM
-+
-+/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
-+
-+/* configure so an HC device and id are always provided */
-+/* always called with process context; sleeping is OK */
-+
-+/**
-+ * usb_hcd_fsl_probe - initialize FSL-based HCDs
-+ * @drvier: Driver to be used for this HCD
-+ * @pdev: USB Host Controller being probed
-+ * Context: !in_interrupt()
-+ *
-+ * Allocates basic resources for this USB host controller.
-+ *
-+ */
-+static int usb_hcd_fsl_probe(const struct hc_driver *driver,
-+			     struct platform_device *pdev)
-+{
-+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+	struct usb_hcd *hcd;
-+	struct resource *res;
-+	int irq;
-+	int retval;
-+
-+	pr_debug("initializing FSL-SOC USB Controller\n");
-+
-+	/* Need platform data for setup */
-+	if (!pdata) {
-+		dev_err(&pdev->dev,
-+			"No platform data for %s.\n", pdev->dev.bus_id);
-+		return -ENODEV;
-+	}
-+
-+	retval = fsl_platform_verify(pdev);
-+	if (retval)
-+		return retval;
-+
-+	/*
-+	 * do platform specific init: check the clock, grab/config pins, etc.
-+	 */
-+	if (pdata->platform_init && pdata->platform_init(pdev)) {
-+		retval = -ENODEV;
-+		goto err1;
-+	}
-+
-+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+	if (!res) {
-+		dev_err(&pdev->dev,
-+			"Found HC with no IRQ. Check %s setup!\n",
-+			pdev->dev.bus_id);
-+		return -ENODEV;
-+	}
-+	irq = res->start;
-+
-+	fsl_platform_set_vbus_power(pdev, 1);
-+
-+	hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id);
-+	if (!hcd) {
-+		retval = -ENOMEM;
-+		goto err1;
-+	}
-+
-+	if (pdata->regs) {
-+		pr_debug("REGS: using pdata->regs (0x%p)\n", pdata->regs);
-+		hcd->regs = pdata->regs;
-+		hcd->rsrc_start = pdata->r_start;
-+		hcd->rsrc_len = pdata->r_len;
-+	} else {
-+		pr_debug("REGS: NO pdata->regs\n");
-+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+		if (!res) {
-+			dev_err(&pdev->dev, "Found HC with no register addr. "
-+				"Check %s setup!\n", pdev->dev.bus_id);
-+			retval = -ENODEV;
-+			goto err2;
-+		}
-+		hcd->rsrc_start = res->start;
-+		hcd->rsrc_len = res->end - res->start + 1;
-+
-+		/*
-+		printk("DDD %s(): rsrc_start=0x%llx  rsrc_len=0x%llx  "
-+			"pdata=0x%p\n", __FUNCTION__,
-+			hcd->rsrc_start, hcd->rsrc_len, pdata);
-+		*/
-+
-+		if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
-+					driver->description)) {
-+			dev_dbg(&pdev->dev, "request_mem_region failed\n");
-+			retval = -EBUSY;
-+			goto err2;
-+		}
-+		hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+
-+		if (hcd->regs == NULL) {
-+			dev_dbg(&pdev->dev, "error mapping memory\n");
-+			retval = -EFAULT;
-+			goto err3;
-+		}
-+	}
-+	hcd->power_budget = pdata->power_budget;
-+
-+	/* DDD
-+	 * the following must be done by this point, otherwise the OTG
-+	 * host port doesn't make it thru initializtion.
-+	 * ehci_halt(), called by ehci_fsl_setup() returns -ETIMEDOUT
-+	 */
-+	fsl_platform_set_host_mode(hcd);
-+
-+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
-+	if (retval != 0)
-+		goto err4;
-+
-+#if defined(CONFIG_USB_OTG)
-+	if (pdata->does_otg) {
-+		struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+
-+		ehci->transceiver = otg_get_transceiver();
-+
-+		if (ehci->transceiver) {
-+			retval = otg_set_host(ehci->transceiver,
-+					      &ehci_to_hcd(ehci)->self);
-+			if (retval) {
-+				if (ehci->transceiver)
-+					put_device(ehci->transceiver->dev);
-+				goto err3;
-+			}
-+		} else {
-+			printk(KERN_ERR "can't find transceiver\n");
-+			retval = -ENODEV;
-+			goto err3;
-+		}
-+	}
-+#endif
-+
-+	return retval;
-+
-+err4:
-+	/* DDD only if we did the iomap() iounmap(hcd->regs); */
-+err3:
-+	/* DDD only if we did a request_
-+	 * release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+	 */
-+err2:
-+	usb_put_hcd(hcd);
-+err1:
-+	dev_err(&pdev->dev, "init %s fail, %d\n", pdev->dev.bus_id, retval);
-+	if (pdata->platform_uninit)
-+		pdata->platform_uninit(pdev);
-+	return retval;
-+}
-+
-+/* may be called without controller electrically present */
-+/* may be called with controller, bus, and devices active */
-+
-+/**
-+ * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
-+ * @dev: USB Host Controller being removed
-+ * Context: !in_interrupt()
-+ *
-+ * Reverses the effect of usb_hcd_fsl_probe().
-+ *
-+ */
-+static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
-+			       struct platform_device *pdev)
-+{
-+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+
-+	/* DDD shouldn't we turn off the power here? */
-+	fsl_platform_set_vbus_power(pdev, 0);
-+
-+	usb_remove_hcd(hcd);
-+
-+	if (ehci->transceiver) {
-+		(void)otg_set_host(ehci->transceiver, 0);
-+		put_device(ehci->transceiver->dev);
-+	}
-+	usb_put_hcd(hcd);
-+
-+	/*
-+	 * do platform specific un-initialization:
-+	 * release iomux pins, etc.
-+	 */
-+	if (pdata->platform_uninit)
-+		pdata->platform_uninit(pdev);
-+}
-+
-+/* called after powerup, by probe or system-pm "wakeup" */
-+static int ehci_fsl_reinit(struct ehci_hcd *ehci)
-+{
-+	fsl_platform_usb_setup(ehci_to_hcd(ehci));
-+	ehci_port_power(ehci, 0);
-+
-+	return 0;
-+}
-+
-+/* called during probe() after chip reset completes */
-+static int ehci_fsl_setup(struct usb_hcd *hcd)
-+{
-+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+	int retval;
-+	struct fsl_usb2_platform_data *pdata;
-+	pdata = hcd->self.controller-> platform_data;
-+
-+	ehci->big_endian_desc = pdata->big_endian_desc;
-+	ehci->big_endian_mmio = pdata->big_endian_mmio;
-+
-+	/* EHCI registers start at offset 0x100 */
-+	ehci->caps = hcd->regs + 0x100;
-+	ehci->regs = hcd->regs + 0x100 +
-+	    HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
-+
-+	pr_debug("%s(): ehci->caps=0x%p  ehci->regs=0x%p\n", __FUNCTION__,
-+		 ehci->caps, ehci->regs);
-+
-+	dbg_hcs_params(ehci, "reset");
-+	dbg_hcc_params(ehci, "reset");
-+
-+	/* cache this readonly data; minimize chip reads */
-+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+
-+	retval = ehci_halt(ehci);
-+	if (retval)
-+		return retval;
-+
-+	/* data structure init */
-+	retval = ehci_init(hcd);
-+	if (retval)
-+		return retval;
-+
-+	ehci->is_tdi_rh_tt = 1;
-+
-+	ehci->sbrn = 0x20;
-+
-+	ehci_reset(ehci);
-+
-+	retval = ehci_fsl_reinit(ehci);
-+	return retval;
-+}
-+
-+static const struct hc_driver ehci_fsl_hc_driver = {
-+	.description = hcd_name,
-+	.product_desc = "Freescale On-Chip EHCI Host Controller",
-+	.hcd_priv_size = sizeof(struct ehci_hcd),
-+
-+	/*
-+	 * generic hardware linkage
-+	 */
-+	.irq = ehci_irq,
-+	.flags = FSL_PLATFORM_HC_FLAGS,
-+
-+	/*
-+	 * basic lifecycle operations
-+	 */
-+	.reset = ehci_fsl_setup,
-+	.start = ehci_run,
-+	.stop = ehci_stop,
-+	.shutdown = ehci_shutdown,
-+
-+	/*
-+	 * managing i/o requests and associated device resources
-+	 */
-+	.urb_enqueue = ehci_urb_enqueue,
-+	.urb_dequeue = ehci_urb_dequeue,
-+	.endpoint_disable = ehci_endpoint_disable,
-+
-+	/*
-+	 * scheduling support
-+	 */
-+	.get_frame_number = ehci_get_frame,
-+
-+	/*
-+	 * root hub support
-+	 */
-+	.hub_status_data = ehci_hub_status_data,
-+	.hub_control = ehci_hub_control,
-+	.bus_suspend = ehci_bus_suspend,
-+	.bus_resume = ehci_bus_resume,
-+};
-+
-+#ifdef CONFIG_USB_OTG
-+/*
-+ * Holding pen for all the EHCI registers except port_status,
-+ * which is a zero element array and hence takes no space.
-+ * The port_status register is saved in usb_ehci_portsc.
-+ */
-+volatile static struct ehci_regs usb_ehci_regs;
-+static u32 usb_ehci_portsc;
-+
-+/* suspend/resume, section 4.3 */
-+
-+/* These routines rely on the bus (pci, platform, etc)
-+ * to handle powerdown and wakeup, and currently also on
-+ * transceivers that don't need any software attention to set up
-+ * the right sort of wakeup.
-+ *
-+ * They're also used for turning on/off the port when doing OTG.
-+ */
-+static int ehci_fsl_drv_suspend(struct platform_device *pdev,
-+				pm_message_t message)
-+{
-+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+	u32 tmp;
-+
-+	pr_debug("%s pdev=0x%p  ehci=0x%p  hcd=0x%p\n",
-+		 __FUNCTION__, pdev, ehci, hcd);
-+	pr_debug("%s ehci->regs=0x%p  hcd->regs=0x%p  hcd->state=%d\n",
-+		 __FUNCTION__, ehci->regs, hcd->regs, hcd->state);
-+
-+	hcd->state = HC_STATE_SUSPENDED;
-+	pdev->dev.power.power_state = PMSG_SUSPEND;
-+
-+	if (hcd->driver->suspend)
-+		return hcd->driver->suspend(hcd, message);
-+
-+	/* ignore non-host interrupts */
-+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-+
-+	tmp = ehci_readl(ehci, &ehci->regs->command);
-+	tmp &= ~CMD_RUN;
-+	ehci_writel(ehci, tmp, &ehci->regs->command);
-+
-+	memcpy((void *)&usb_ehci_regs, ehci->regs, sizeof(struct ehci_regs));
-+	usb_ehci_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
-+
-+	/* clear the W1C bits */
-+	usb_ehci_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
-+
-+	fsl_platform_set_vbus_power(pdev, 0);
-+	/* clear PP to cut power to the port */
-+	tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
-+	tmp &= ~PORT_POWER;
-+	ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
-+
-+	return 0;
-+}
-+
-+static int ehci_fsl_drv_resume(struct platform_device *pdev)
-+{
-+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+	u32 tmp;
-+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+
-+	pr_debug("%s pdev=0x%p  pdata=0x%p  ehci=0x%p  hcd=0x%p\n",
-+		 __FUNCTION__, pdev, pdata, ehci, hcd);
-+
-+	pr_debug("%s ehci->regs=0x%p  hcd->regs=0x%p\n",
-+		 __FUNCTION__, ehci->regs, hcd->regs);
-+
-+	memcpy(ehci->regs, (void *)&usb_ehci_regs, sizeof(struct ehci_regs));
-+
-+	tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
-+	ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
-+	pr_debug("tmp %08x  set usbmode %08x\n", tmp,
-+		 ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE));
-+
-+	ehci_writel(ehci, usb_ehci_portsc, &ehci->regs->port_status[0]);
-+	pr_debug("set portsc %08x  %08x\n", usb_ehci_portsc,
-+		 ehci_readl(ehci, &ehci->regs->port_status[0]));
-+
-+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-+	hcd->state = HC_STATE_RUNNING;
-+	pdev->dev.power.power_state = PMSG_ON;
-+
-+	tmp = ehci_readl(ehci, &ehci->regs->command);
-+	tmp |= CMD_RUN;
-+	ehci_writel(ehci, tmp, &ehci->regs->command);
-+
-+	fsl_platform_set_vbus_power(pdev, 1);
-+
-+	usb_hcd_resume_root_hub(hcd);
-+
-+	return 0;
-+}
-+#endif				/* CONFIG_USB_OTG */
-+
-+static int ehci_fsl_drv_probe(struct platform_device *pdev)
-+{
-+	if (usb_disabled())
-+		return -ENODEV;
-+
-+	return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
-+}
-+
-+static int ehci_fsl_drv_remove(struct platform_device *pdev)
-+{
-+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-+
-+	usb_hcd_fsl_remove(hcd, pdev);
-+
-+	return 0;
-+}
-+
-+MODULE_ALIAS("fsl-ehci");
-+
-+static struct platform_driver ehci_fsl_driver = {
-+	.probe = ehci_fsl_drv_probe,
-+	.remove = ehci_fsl_drv_remove,
-+	.shutdown = usb_hcd_platform_shutdown,
-+#ifdef CONFIG_USB_OTG
-+	.suspend = ehci_fsl_drv_suspend,
-+	.resume  = ehci_fsl_drv_resume,
-+#endif
-+	.driver = {
-+		   .name = "fsl-ehci",
-+		   },
-+};
---- a/drivers/usb/host/ehci-fsl.h
-+++ b/drivers/usb/host/ehci-fsl.h
-@@ -18,6 +18,8 @@
- #ifndef _EHCI_FSL_H
- #define _EHCI_FSL_H
- 
-+#include <linux/usb/fsl_xcvr.h>
-+
- /* offsets for the non-ehci registers in the FSL SOC USB controller */
- #define FSL_SOC_USB_ULPIVP	0x170
- #define FSL_SOC_USB_PORTSC1	0x184
-@@ -34,5 +36,29 @@
- #define FSL_SOC_USB_PRICTRL	0x40c	/* NOTE: big-endian */
- #define FSL_SOC_USB_SICTRL	0x410	/* NOTE: big-endian */
- #define FSL_SOC_USB_CTRL	0x500	/* NOTE: big-endian */
--#define SNOOP_SIZE_2GB		0x1e
-+
-+#ifdef CONFIG_MPC834x
-+#include <sysdev/fsl_usb.h>
-+#endif
-+
-+#ifdef CONFIG_ARCH_MX3
-+#include <asm/arch/mx31_usb.h>
-+#endif
-+
-+#ifdef CONFIG_ARCH_MX27
-+#include <asm/arch/mx27_usb.h>
-+#endif
-+
-+#ifdef CONFIG_M54455
-+#include <asm-m68k/mcf5445x_usb.h>
-+#endif
-+
-+
-+static void fsl_platform_set_vbus_power(struct platform_device *pdev, int on)
-+{
-+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+
-+	if (pdata->xcvr_ops && pdata->xcvr_ops->set_vbus_power)
-+		pdata->xcvr_ops->set_vbus_power(pdata, on);
-+}
- #endif				/* _EHCI_FSL_H */
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -122,6 +122,12 @@ struct ehci_hcd {			/* one per controlle
- 
- 	u8			sbrn;		/* packed release number */
- 
-+	/*
-+	 * OTG controllers and transceivers need software interaction;
-+	 * other external transceivers should be software-transparent
-+	 */
-+	struct otg_transceiver	*transceiver;
-+
- 	/* irq statistics */
- #ifdef EHCI_STATS
- 	struct ehci_stats	stats;
-@@ -753,6 +759,22 @@ ehci_port_speed(struct ehci_hcd *ehci, u
- #define writel_be(val, addr)	__raw_writel(val, (__force unsigned *)addr)
- #endif
- 
-+#if defined(CONFIG_COLDFIRE)
-+/*
-+ * Sorry, include/asm-m68k/io.h is messed up.  It will give you a
-+ * BE readl or a LE readl depending on whether or not CONFIG_PCI is set.
-+ * how broken is that?  Do the right thing here.
-+ */
-+#undef readl
-+#undef writel
-+
-+#define readl(addr)		in_le32((__force unsigned *)(addr))
-+#define writel(val,addr)	out_le32((__force unsigned *)(addr),(val))
-+
-+#define readl_be(addr)		in_be32((__force unsigned *)(addr))
-+#define writel_be(val, addr)	out_be32((__force unsigned *)(addr), (val))
-+#endif
-+
- static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
- 		__u32 __iomem * regs)
- {
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1043,6 +1043,11 @@ MODULE_LICENSE ("GPL");
- #define	PLATFORM_DRIVER		ixp4xx_ehci_driver
- #endif
- 
-+#ifdef CONFIG_M54455
-+#include "ehci-arc.c"
-+#define	PLATFORM_DRIVER		ehci_fsl_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
- #error "missing bus glue for ehci-hcd"
---- a/drivers/usb/host/ehci-mem.c
-+++ b/drivers/usb/host/ehci-mem.c
-@@ -40,7 +40,8 @@ static inline void ehci_qtd_init(struct 
- {
- 	memset (qtd, 0, sizeof *qtd);
- 	qtd->qtd_dma = dma;
--	qtd->hw_token = cpu_to_le32 (QTD_STS_HALT);
-+	// DDD official code` has: qtd->hw_token = cpu_to_le32 (QTD_STS_HALT);
-+	qtd->hw_token = cpu_to_hc32 (ehci, QTD_STS_HALT);
- 	qtd->hw_next = EHCI_LIST_END(ehci);
- 	qtd->hw_alt_next = EHCI_LIST_END(ehci);
- 	INIT_LIST_HEAD (&qtd->qtd_list);
-@@ -211,9 +212,11 @@ static int ehci_mem_init (struct ehci_hc
- 	}
- 
- 	/* Hardware periodic table */
--	ehci->periodic = (__le32 *)
-+	// DDD official code has: ehci->periodic = (__le32 *)
-+	ehci->periodic = (__hc32 *)
- 		dma_alloc_coherent (ehci_to_hcd(ehci)->self.controller,
--			ehci->periodic_size * sizeof(__le32),
-+			// DDD official: ehci->periodic_size * sizeof(__le32),
-+			ehci->periodic_size * sizeof(__hc32),
- 			&ehci->periodic_dma, 0);
- 	if (ehci->periodic == NULL) {
- 		goto fail;
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -32,6 +32,7 @@ config USB_EHCI_HCD
- config USB_EHCI_ROOT_HUB_TT
- 	bool "Root Hub Transaction Translators (EXPERIMENTAL)"
- 	depends on USB_EHCI_HCD && EXPERIMENTAL
-+	default y if M54455
- 	---help---
- 	  Some EHCI chips have vendor-specific extensions to integrate
- 	  transaction translators, so that no OHCI or UHCI companion
-@@ -60,12 +61,12 @@ config USB_EHCI_TT_NEWSCHED
- 
- config USB_EHCI_BIG_ENDIAN_MMIO
- 	bool
--	depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX)
-+	depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX || M54455)
- 	default y
- 
- config USB_EHCI_BIG_ENDIAN_DESC
- 	bool
--	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
-+	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || M54455)
- 	default y
- 
- config USB_EHCI_FSL
-@@ -260,3 +261,19 @@ config USB_R8A66597_HCD
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called r8a66597-hcd.
- 
-+choice
-+	prompt "Select transceiver"
-+	depends on M54455
-+	default USB_M5445X_ULPI 
-+
-+config USB_M5445X_ULPI
-+	bool "External ULPI"
-+	---help---
-+	  Enable support for the external HS ULPI transceiver.
-+
-+config USB_M5445X_FSLS
-+	bool "On-chip (FL/LS only)"
-+	---help---
-+	  Enable support for the on-chip FL/LS transceiver.
-+endchoice
-+
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -6,7 +6,7 @@ ifeq ($(CONFIG_USB_DEBUG),y)
- 	EXTRA_CFLAGS		+= -DDEBUG
- endif
- 
--obj-$(CONFIG_PCI)		+= pci-quirks.o
-+#obj-$(CONFIG_PCI)		+= pci-quirks.o
- 
- obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
- obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
---- a/drivers/usb/Kconfig
-+++ b/drivers/usb/Kconfig
-@@ -55,6 +55,7 @@ config USB_ARCH_HAS_EHCI
- 	default y if PPC_83xx
- 	default y if SOC_AU1200
- 	default y if ARCH_IXP4XX
-+	default y if M54455
- 	default PCI
- 
- # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -32,3 +32,5 @@ obj-$(CONFIG_USB)		+= misc/
- 
- obj-$(CONFIG_USB_ATM)		+= atm/
- obj-$(CONFIG_USB_SPEEDTOUCH)	+= atm/
-+
-+obj-$(CONFIG_USB_OTG)		+= otg/
---- /dev/null
-+++ b/drivers/usb/otg/fsl_otg.c
-@@ -0,0 +1,1306 @@
-+/*
-+ * Copyright (c) Freescale Semiconductor, Inc. 2006-2007
-+ *
-+ * USB OTG ULPI driver
-+ *
-+ * Based on code for MPC from:
-+ *  Leo Li<LeoLi@freescale.com>
-+ *  Jerry Huang<Chang-Ming.Huang@freescale.com>
-+ *
-+ * and M5329 code from
-+ *  Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
-+ *  Andrey Butok
-+ *
-+ *  Initialization based on code from Shlomi Gridish.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the  GNU General Public License along
-+ * with this program; if not, write  to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ ***************************************************************************
-+ * Changes:
-+ *   v0.3	08 August 2007		Duck
-+ *   v0.2	20 October 2006		Andrey Butok
-+ *		Issues fixing and some changes.
-+ *   v0.1	September 2006		Yaroslav Vinogradov
-+ *		Initial version.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+#include <linux/ioport.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/smp_lock.h>
-+#include <linux/proc_fs.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/reboot.h>
-+#include <linux/timer.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/usb.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/ch9.h>
-+#include <linux/usb_gadget.h>
-+#include <linux/workqueue.h>
-+#include <linux/time.h>
-+#include <linux/fsl_devices.h>
-+#include <linux/usb/fsl_usb2.h>
-+
-+#include <linux/io.h>
-+
-+#if defined CONFIG_M54455
-+#include <asm/mcfsim.h>
-+#endif
-+
-+#define USE_WORK_QUEUES
-+#include "fsl_otg.h"
-+
-+#define CONFIG_USB_OTG_DEBUG_FILES
-+#define DRIVER_VERSION "Revision: 1.56"
-+#define DRIVER_AUTHOR "Freescale Semiconductor Inc."
-+#define DRIVER_DESC "Freescale USB OTG ULPI Driver"
-+#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
-+
-+MODULE_DESCRIPTION("Freescale USB OTG Controller Driver");
-+
-+static const char driver_name[] = "fsl-usb2-otg";
-+
-+static spinlock_t usb_dr_regs_lock;
-+
-+/*#define HA_DATA_PULSE 1*/
-+
-+volatile static struct fsl_usb_device_regs *usb_dr_regs;
-+static struct fsl_otg *fsl_otg_dev;
-+static int srp_wait_done;
-+
-+/* Driver specific timers */
-+struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr,
-+	*b_srp_wait_tmr, *a_wait_enum_tmr;
-+
-+static struct list_head active_timers;
-+
-+static struct fsl_otg_config fsl_otg_initdata = {
-+	.otg_port = 1,
-+};
-+
-+#if 0
-+static void dump_state(const char *string, struct otg_fsm *fsm)
-+{
-+	printk(KERN_DEBUG "%s\n\tOTG state: %s\n", string,
-+	       state_string(fsl_otg_dev->otg.state));
-+	printk(KERN_DEBUG "\tFSM protocol=%s\n", fsm->protocol ?
-+	       (fsm->protocol == PROTO_HOST ? "Host" : "Gadget")
-+	       : "None");
-+
-+	/* regs */
-+	printk(KERN_DEBUG "\t  OTGSC 0x%08x\n",
-+	       fsl_readl(&usb_dr_regs->otgsc));
-+	printk(KERN_DEBUG "\tPORTSC1 0x%08x\n",
-+	       fsl_readl(&usb_dr_regs->portsc1));
-+	printk(KERN_DEBUG "\tUSBMODE 0x%08x\n",
-+	       fsl_readl(&usb_dr_regs->usbmode));
-+	printk(KERN_DEBUG "\t USBCMD 0x%08x\n",
-+	       fsl_readl(&usb_dr_regs->usbcmd));
-+	printk(KERN_DEBUG "\t USBSTS 0x%08x\n",
-+	       fsl_readl(&usb_dr_regs->usbsts));
-+
-+	/* ------ State Machine Variables ----- */
-+	printk(KERN_DEBUG "\ta_bus_req: %d\n", fsm->a_bus_req);
-+	printk(KERN_DEBUG "\tb_bus_req: %d\n", fsm->b_bus_req);
-+	printk(KERN_DEBUG "\ta_bus_resume: %d\n", fsm->a_bus_resume);
-+	printk(KERN_DEBUG "\ta_bus_suspend: %d\n", fsm->a_bus_suspend);
-+	printk(KERN_DEBUG "\ta_conn: %d\n", fsm->a_conn);
-+	printk(KERN_DEBUG "\ta_sess_vld: %d\n", fsm->a_sess_vld);
-+	printk(KERN_DEBUG "\ta_srp_det: %d\n", fsm->a_srp_det);
-+	printk(KERN_DEBUG "\ta_vbus_vld: %d\n", fsm->a_vbus_vld);
-+	printk(KERN_DEBUG "\tb_bus_resume: %d\n", fsm->b_bus_resume);
-+	printk(KERN_DEBUG "\tb_bus_suspend: %d\n", fsm->b_bus_suspend);
-+	printk(KERN_DEBUG "\tb_conn: %d\n", fsm->b_conn);
-+	printk(KERN_DEBUG "\tb_se0_srp: %d\n", fsm->b_se0_srp);
-+	printk(KERN_DEBUG "\tb_sess_end: %d\n", fsm->b_sess_end);
-+	printk(KERN_DEBUG "\tb_sess_vld: %d\n", fsm->b_sess_vld);
-+	printk(KERN_DEBUG "\tid: %d\n", fsm->id);
-+}
-+#endif
-+
-+
-+/* Routines to access transceiver ULPI registers */
-+u8 view_ulpi(u8 addr)
-+{
-+	u32 temp;
-+
-+	temp = 0x40000000 | (addr << 16);
-+	fsl_writel(temp, &usb_dr_regs->ulpiview);
-+
-+	udelay(1000);
-+
-+	/* DDD timeout this loop: */
-+	do {
-+		temp = fsl_readl(&usb_dr_regs->ulpiview);
-+	} while (temp & 0x40000000);
-+
-+	return (temp & 0x0000ff00) >> 8;
-+}
-+
-+int write_ulpi(u8 addr, u8 data)
-+{
-+	u32 temp;
-+
-+	temp = 0x60000000 | (addr << 16) | data;
-+	fsl_writel(temp, &usb_dr_regs->ulpiview);
-+	return 0;
-+}
-+
-+/* prototype declaration */
-+void fsl_otg_add_timer(void *timer);
-+void fsl_otg_del_timer(void *timer);
-+
-+/* -------------------------------------------------------------*/
-+/* Operations that will be called from OTG Finite State Machine */
-+
-+/* Charge vbus for vbus pulsing in SRP */
-+void fsl_otg_chrg_vbus(int on)
-+{
-+	u32 tmp;
-+
-+	VDBG(" %d\n", on);
-+
-+	tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
-+
-+	if (on) {
-+		tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE;
-+		tmp |= OTGSC_CTRL_VBUS_CHARGE;
-+	} else {
-+		tmp &= ~OTGSC_CTRL_VBUS_CHARGE;
-+	}
-+	fsl_writel(tmp, &usb_dr_regs->otgsc);
-+}
-+
-+/* Discharge vbus through a resistor to ground */
-+void fsl_otg_dischrg_vbus(int on)
-+{
-+	u32 tmp;
-+
-+	VDBG(" %d\n", on);
-+
-+	tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
-+
-+	if (on)
-+		tmp |= OTGSC_CTRL_VBUS_DISCHARGE;
-+	else
-+		tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE;
-+
-+	fsl_writel(tmp, &usb_dr_regs->otgsc);
-+}
-+
-+/* A-device driver vbus, controlled through PP bit in PORTSC */
-+void fsl_otg_drv_vbus(int on)
-+{
-+	u32 tmp;
-+
-+	VDBG(" %d\n", on);
-+
-+	tmp = fsl_readl(&usb_dr_regs->portsc1) & ~PORTSCX_W1C_BITS;
-+
-+	if (on)
-+		tmp |= PORTSCX_PORT_POWER;
-+	else
-+		tmp &= ~PORTSCX_PORT_POWER;
-+
-+	fsl_writel(tmp, &usb_dr_regs->portsc1);
-+}
-+
-+/* Pull-up D+, signalling connect by periperal. Also used in
-+ * data-line pulsing in SRP */
-+void fsl_otg_loc_conn(int on)
-+{
-+	u32 tmp;
-+
-+	VDBG(" %d\n", on);
-+
-+	tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
-+
-+	if (on)
-+		tmp |= OTGSC_CTRL_DATA_PULSING;
-+	else
-+		tmp &= ~OTGSC_CTRL_DATA_PULSING;
-+
-+	fsl_writel(tmp, &usb_dr_regs->otgsc);
-+}
-+
-+/* Generate SOF by host.  This is controlled through suspend/resume the
-+ * port.  In host mode, controller will automatically send SOF.
-+ * Suspend will block the data on the port.
-+ */
-+void fsl_otg_loc_sof(int on)
-+{
-+	u32 tmp;
-+
-+	VDBG(" %d\n", on);
-+
-+	tmp = fsl_readl(&usb_dr_regs->portsc1) & ~PORTSCX_W1C_BITS;
-+
-+	if (on)
-+		tmp |= PORTSCX_PORT_FORCE_RESUME;
-+	else
-+		tmp |= PORTSCX_PORT_SUSPEND;
-+
-+	fsl_writel(tmp, &usb_dr_regs->portsc1);
-+}
-+
-+/* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */
-+void fsl_otg_start_pulse(void)
-+{
-+	u32 __attribute__ ((unused)) tmp;
-+
-+	VDBG("\n");
-+	srp_wait_done = 0;
-+
-+#ifdef HA_DATA_PULSE
-+	tmp = fsl_readl(&usb_dr_regs->otgsc) &= ~OTGSC_INTSTS_MASK;
-+	tmp |= OTGSC_HA_DATA_PULSE;
-+	fsl_writel(tmp, &usb_dr_regs->otgsc);
-+#else
-+	fsl_otg_loc_conn(1);
-+#endif
-+
-+	fsl_otg_add_timer(b_data_pulse_tmr);
-+}
-+
-+void fsl_otg_pulse_vbus(void);
-+
-+void b_data_pulse_end(unsigned long foo)
-+{
-+#ifdef HA_DATA_PULSE
-+#else
-+	fsl_otg_loc_conn(0);
-+#endif
-+
-+	/* Do VBUS pulse after data pulse */
-+	fsl_otg_pulse_vbus();
-+}
-+
-+void fsl_otg_pulse_vbus(void)
-+{
-+	srp_wait_done = 0;
-+	fsl_otg_chrg_vbus(1);
-+	/* start the timer to end vbus charge */
-+	fsl_otg_add_timer(b_vbus_pulse_tmr);
-+}
-+
-+void b_vbus_pulse_end(unsigned long foo)
-+{
-+	fsl_otg_chrg_vbus(0);
-+
-+	/* As USB3300 using the same a_sess_vld and b_sess_vld voltage
-+	 * we need to discharge the bus for a while to distinguish
-+	 * residual voltage of vbus pulsing and A device pull up */
-+	fsl_otg_dischrg_vbus(1);
-+	fsl_otg_add_timer(b_srp_wait_tmr);
-+}
-+
-+void b_srp_end(unsigned long foo)
-+{
-+	fsl_otg_dischrg_vbus(0);
-+	srp_wait_done = 1;
-+
-+	if ((fsl_otg_dev->otg.state == OTG_STATE_B_SRP_INIT) &&
-+	    fsl_otg_dev->fsm.b_sess_vld)
-+		fsl_otg_dev->fsm.b_srp_done = 1;
-+}
-+
-+/* Workaround for a_host suspending too fast.  When a_bus_req=0,
-+ * a_host will start by SRP.  It needs to set b_hnp_enable before
-+ * actually suspending to start HNP
-+ */
-+void a_wait_enum(unsigned long foo)
-+{
-+	VDBG("a_wait_enum timeout\n");
-+	if (!fsl_otg_dev->otg.host->b_hnp_enable)
-+		fsl_otg_add_timer(a_wait_enum_tmr);
-+	else
-+		otg_statemachine(&fsl_otg_dev->fsm);
-+}
-+
-+/* ------------------------------------------------------*/
-+
-+/* The timeout callback function to set time out bit */
-+void set_tmout(unsigned long indicator)
-+{
-+	*(int *)indicator = 1;
-+}
-+
-+/* Initialize timers */
-+void fsl_otg_init_timers(struct otg_fsm *fsm)
-+{
-+	/* FSM used timers */
-+	fsm->a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
-+				(unsigned long)&fsm->a_wait_vrise_tmout);
-+	fsm->a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
-+				(unsigned long)&fsm->a_wait_bcon_tmout);
-+	fsm->a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
-+				(unsigned long)&fsm->a_aidl_bdis_tmout);
-+	fsm->b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
-+				(unsigned long)&fsm->b_ase0_brst_tmout);
-+	fsm->b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
-+				(unsigned long)&fsm->b_se0_srp);
-+	fsm->b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL,
-+				(unsigned long)&fsm->b_srp_done);
-+	fsm->a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10,
-+				(unsigned long)&fsm);
-+
-+	/* device driver used timers */
-+	b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0);
-+	b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end,
-+				TB_DATA_PLS, 0);
-+	b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end,
-+				TB_VBUS_PLS, 0);
-+
-+}
-+
-+/* Add timer to timer list */
-+void fsl_otg_add_timer(void *gtimer)
-+{
-+	struct fsl_otg_timer *timer = (struct fsl_otg_timer *)gtimer;
-+	struct fsl_otg_timer *tmp_timer;
-+
-+	/* Check if the timer is already in the active list,
-+	 * if so update timer count
-+	 */
-+	list_for_each_entry(tmp_timer, &active_timers, list)
-+	    if (tmp_timer == timer) {
-+		timer->count = timer->expires;
-+		return;
-+	}
-+	timer->count = timer->expires;
-+	list_add_tail(&timer->list, &active_timers);
-+}
-+
-+/* Remove timer from the timer list; clear timeout status */
-+void fsl_otg_del_timer(void *gtimer)
-+{
-+	struct fsl_otg_timer *timer = (struct fsl_otg_timer *)gtimer;
-+	struct fsl_otg_timer *tmp_timer, *del_tmp;
-+
-+	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
-+		if (tmp_timer == timer)
-+			list_del(&timer->list);
-+}
-+
-+/*
-+ * Reduce timer count by 1, and find timeout conditions.
-+ * Called by fsl_otg 1ms timer interrupt
-+ */
-+int fsl_otg_tick_timer(void)
-+{
-+	struct fsl_otg_timer *tmp_timer, *del_tmp;
-+	int expired = 0;
-+
-+	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
-+		tmp_timer->count--;
-+		/* check if timer expires */
-+		if (!tmp_timer->count) {
-+			list_del(&tmp_timer->list);
-+			tmp_timer->function(tmp_timer->data);
-+			expired = 1;
-+		}
-+	}
-+
-+	return expired;
-+}
-+
-+/* Reset controller, not reset the bus */
-+void otg_reset_controller(void)
-+{
-+	u32 command;
-+	unsigned long flags;
-+	int timeout;
-+
-+	VDBG("\n");
-+
-+	spin_lock_irqsave(&usb_dr_regs_lock, flags);
-+
-+	command = fsl_readl(&usb_dr_regs->usbcmd);
-+	command |= USB_CMD_CTRL_RESET;
-+	fsl_writel(command, &usb_dr_regs->usbcmd);
-+	spin_unlock_irqrestore(&usb_dr_regs_lock, flags);
-+
-+	/* Wait reset completed */
-+	timeout = 500;
-+	while (fsl_readl(&usb_dr_regs->usbcmd) & USB_CMD_CTRL_RESET)
-+		udelay(1);
-+	if (timeout <= 0)
-+		ERR("%s - USBCMD_RST never clear. Timeout is %d \n",
-+			__FUNCTION__, timeout);
-+}
-+
-+/* Call suspend/resume routines in host driver */
-+int fsl_otg_start_host(struct otg_fsm *fsm, int on)
-+{
-+	struct otg_transceiver *xceiv = fsm->transceiver;
-+	struct device *dev;
-+	struct fsl_otg *otg_dev = container_of(xceiv, struct fsl_otg, otg);
-+	u32 retval = 0;
-+
-+	if (!xceiv->host)
-+		return -ENODEV;
-+
-+	dev = xceiv->host->controller;
-+
-+	/*
-+	 * Update a_vbus_vld state as a_vbus_vld int is disabled
-+	 * in device mode
-+	 */
-+	fsm->a_vbus_vld =
-+		!!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID);
-+	if (on) {
-+		/* start fsl usb host controller */
-+		if (otg_dev->host_working)
-+			goto end;
-+		else {
-+			otg_reset_controller();
-+			VDBG("host on......\n");
-+			if (dev->driver->resume) {
-+				retval = dev->driver->resume(dev);
-+				if (fsm->id) {
-+					/* default-b */
-+					fsl_otg_drv_vbus(1);
-+					/* Workaround: b_host can't driver
-+					 * vbus, but PP in PORTSC needs to
-+					 * be 1 for host to work.
-+					 * So we set drv_vbus bit in
-+					 * transceiver to 0 thru ULPI. */
-+					write_ulpi(0x0c, 0x20);
-+				}
-+			}
-+
-+			otg_dev->host_working = 1;
-+		}
-+	} else {
-+		/* stop fsl usb host controller */
-+		if (!otg_dev->host_working)
-+			goto end;
-+		else {
-+			VDBG("host off......\n");
-+			if (dev && dev->driver) {
-+				retval = dev->driver->suspend(dev, PMSG_SUSPEND);
-+				if (fsm->id)
-+					/* default-b */
-+					fsl_otg_drv_vbus(0);
-+			}
-+			otg_dev->host_working = 0;
-+		}
-+	}
-+end:
-+	return retval;
-+}
-+
-+/*
-+ * Call suspend and resume function in udc driver
-+ * to stop and start udc driver.
-+ */
-+int fsl_otg_start_gadget(struct otg_fsm *fsm, int on)
-+{
-+	struct otg_transceiver *xceiv = fsm->transceiver;
-+	struct device *dev;
-+
-+	VDBG("DDD fsm=%p  xceiv=%p\n", fsm, xceiv);
-+	if (!xceiv->gadget || !xceiv->gadget->dev.parent)
-+		return -ENODEV;
-+
-+	VDBG("DDD xceiv=%p  xceiv->gadget=%p  parent=%p\n", xceiv, xceiv->gadget,
-+		xceiv->gadget->dev.parent);
-+
-+	VDBG("gadget %s\n", on ? "on" : "off");
-+	/* DDD  dump_state("starting gadget", fsm); */
-+
-+	dev = xceiv->gadget->dev.parent;
-+
-+	if (on)
-+		dev->driver->resume(dev);
-+	else
-+		dev->driver->suspend(dev, PMSG_SUSPEND);
-+
-+	return 0;
-+}
-+
-+#if 0
-+static void fsl_otg_enable(struct otg_transceiver *otg_p)
-+{
-+	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
-+	struct otg_fsm *fsm = &(otg_dev)->fsm;
-+	u32 otg_sc;
-+
-+	/* DDD VDBG(""); */
-+	/* enable OTG interrupt */
-+	otg_sc = fsl_readl(&usb_dr_regs->otgsc);
-+	otg_sc |= OTGSC_INTERRUPT_ENABLE_BITS_MASK;
-+	otg_sc &= ~OTGSC_IE_1ms_TIMER;
-+	otg_sc &= ~OTGSC_CTRL_VBUS_DISCHARGE;
-+	otg_sc |= OTGSC_IE_USB_ID;
-+	fsl_writel(otg_sc, &usb_dr_regs->otgsc);
-+
-+	fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
-+
-+	if (fsm->id) {
-+		otg_p->state = OTG_STATE_UNDEFINED;
-+	} else {
-+		otg_p->state = OTG_STATE_A_IDLE;
-+	}
-+
-+	otg_p->default_a = (fsm->id == 0);
-+	otg_p->host->is_b_host = fsm->id;
-+	otg_p->gadget->is_a_peripheral = !fsm->id;
-+
-+	fsm->a_vbus_vld = 1;
-+
-+	fsm->b_sess_vld = (otg_sc & OTGSC_STS_B_SESSION_VALID) ? 1 : 0;
-+	fsm->a_sess_vld = (otg_sc & OTGSC_STS_A_SESSION_VALID) ? 1 : 0;
-+	fsm->b_sess_end = (otg_sc & OTGSC_STS_B_SESSION_END) ? 1 : 0;
-+}
-+#endif
-+
-+/*
-+ * Called by initialization code of host driver.  Register host controller
-+ * to the OTG.  Suspend host for OTG role detection.
-+ */
-+static int fsl_otg_set_host(struct otg_transceiver *otg_p, struct usb_bus *host)
-+{
-+	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
-+
-+	if (!otg_p || otg_dev != fsl_otg_dev)
-+		return -ENODEV;
-+
-+	otg_p->host = host;
-+
-+	otg_dev->fsm.a_bus_drop = 0;
-+	otg_dev->fsm.a_bus_req = 1;
-+
-+	if (host) {
-+		VDBG("host off......\n");
-+
-+		otg_p->host->otg_port = fsl_otg_initdata.otg_port;
-+		otg_p->host->is_b_host = otg_dev->fsm.id;
-+		/* must leave time for khubd to finish its thing
-+		 * before yanking the host driver out from under it,
-+		 * so suspend the host after a short delay.
-+		 */
-+		otg_dev->host_working = 1;
-+		schedule_delayed_work(&otg_dev->otg_event, 100);
-+		return 0;
-+	} else {		/* host driver going away */
-+
-+		if (!(le32_to_cpu(otg_dev->dr_mem_map->otgsc) &
-+		      OTGSC_STS_USB_ID)) {
-+			/* Mini-A cable connected */
-+			struct otg_fsm *fsm = &otg_dev->fsm;
-+
-+			otg_p->state = OTG_STATE_UNDEFINED;
-+			fsm->protocol = PROTO_UNDEF;
-+		}
-+	}
-+
-+	otg_dev->host_working = 0;
-+
-+	otg_statemachine(&otg_dev->fsm);
-+
-+	return 0;
-+}
-+
-+/* Called by initialization code of udc.  Register udc to OTG.*/
-+static int fsl_otg_set_peripheral(struct otg_transceiver *otg_p,
-+				  struct usb_gadget *gadget)
-+{
-+	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
-+
-+	VDBG("\n");
-+
-+	if (!otg_p || otg_dev != fsl_otg_dev)
-+		return -ENODEV;
-+
-+	if (!gadget) {
-+		if (!otg_dev->otg.default_a)
-+			otg_p->gadget->ops->vbus_draw(otg_p->gadget, 0);
-+		usb_gadget_vbus_disconnect(otg_dev->otg.gadget);
-+		otg_dev->otg.gadget = 0;
-+		otg_dev->fsm.b_bus_req = 0;
-+		otg_statemachine(&otg_dev->fsm);
-+		return 0;
-+	}
-+
-+	otg_p->gadget = gadget;
-+	otg_p->gadget->is_a_peripheral = !otg_dev->fsm.id;
-+
-+	otg_dev->fsm.b_bus_req = 1;
-+
-+	/* start the gadget right away if the ID pin says Mini-B */
-+	DBG("ID pin=%d\n", otg_dev->fsm.id);
-+	if (otg_dev->fsm.id == 1) {
-+		fsl_otg_start_host(&otg_dev->fsm, 0);
-+		fsl_otg_drv_vbus(0);
-+		fsl_otg_start_gadget(&otg_dev->fsm, 1);
-+	}
-+
-+	return 0;
-+}
-+
-+/* Set OTG port power, only for B-device */
-+static int fsl_otg_set_power(struct otg_transceiver *otg_p, unsigned mA)
-+{
-+	if (!fsl_otg_dev)
-+		return -ENODEV;
-+	if (otg_p->state == OTG_STATE_B_PERIPHERAL)
-+		printk(KERN_DEBUG "FSL OTG:Draw %d mA\n", mA);
-+
-+	return 0;
-+}
-+
-+/* Delayed pin detect interrupt processing.
-+ *
-+ * When the Mini-A cable is disconnected from the board,
-+ * the pin-detect interrupt happens before the disconnnect
-+ * interrupts for the connected device(s).  In order to
-+ * process the disconnect interrupt(s) prior to switching
-+ * roles, the pin-detect interrupts are delayed, and handled
-+ * by this routine.
-+ */
-+static void fsl_otg_event(struct work_struct *work)
-+{
-+	struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work);
-+	struct otg_fsm *fsm = &og->fsm;
-+
-+	VDBG("DDD fsm->id=%d\n", fsm->id);
-+	if (fsm->id) {		/* switch to gadget */
-+		fsl_otg_start_host(fsm, 0);
-+		fsl_otg_drv_vbus(0);
-+		fsl_otg_start_gadget(fsm, 1);
-+	}
-+}
-+
-+/* B-device start SRP */
-+static int fsl_otg_start_srp(struct otg_transceiver *otg_p)
-+{
-+	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
-+
-+	if (!otg_p || otg_dev != fsl_otg_dev
-+	    || otg_p->state != OTG_STATE_B_IDLE)
-+		return -ENODEV;
-+
-+	otg_dev->fsm.b_bus_req = 1;
-+	otg_statemachine(&otg_dev->fsm);
-+
-+	return 0;
-+}
-+
-+/* A_host suspend will call this function to start hnp */
-+static int fsl_otg_start_hnp(struct otg_transceiver *otg_p)
-+{
-+	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
-+
-+	if (!otg_p || otg_dev != fsl_otg_dev)
-+		return -ENODEV;
-+
-+	VDBG("start_hnp.............\n");
-+	/* clear a_bus_req to enter a_suspend state */
-+	otg_dev->fsm.a_bus_req = 0;
-+	otg_statemachine(&otg_dev->fsm);
-+
-+	return 0;
-+}
-+
-+/*
-+ * Interrupt handler.  OTG/host/peripheral share the same int line.
-+ * OTG driver clears OTGSC interrupts and leaves USB interrupts
-+ * intact.  It needs to have knowledge of some USB interrupts
-+ * such as port change.
-+ */
-+irqreturn_t fsl_otg_isr(int irq, void *dev_id)
-+{
-+	struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm;
-+	struct otg_transceiver *otg = &((struct fsl_otg *)dev_id)->otg;
-+	u32 otg_int_src, otg_sc;
-+
-+	otg_sc = fsl_readl(&usb_dr_regs->otgsc);
-+	otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8);
-+
-+	/* Only clear otg interrupts */
-+	fsl_writel(otg_sc, &usb_dr_regs->otgsc);
-+
-+	/*FIXME: ID change not generate when init to 0 */
-+	fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
-+	otg->default_a = (fsm->id == 0);
-+
-+	/* process OTG interrupts */
-+	if (otg_int_src) {
-+		VDBG("\nOTG irq 0x%08x\n", otg_int_src);
-+
-+		if (otg_int_src & OTGSC_INTSTS_USB_ID) {
-+			fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
-+			otg->default_a = (fsm->id == 0);
-+			/* clear conn information */
-+			if (fsm->id)
-+				fsm->b_conn = 0;
-+			else
-+				fsm->a_conn = 0;
-+
-+			if (otg->host)
-+				otg->host->is_b_host = fsm->id;
-+			if (otg->gadget)
-+				otg->gadget->is_a_peripheral = !fsm->id;
-+			VDBG("ID int (ID is %d)\n", fsm->id);
-+
-+			if (fsm->id) {	/* switch to gadget */
-+				schedule_delayed_work(&((struct fsl_otg *)
-+							dev_id)->otg_event, 25);
-+			} else {	/* switch to host */
-+				cancel_delayed_work(&
-+						    ((struct fsl_otg *)dev_id)->
-+						    otg_event);
-+				fsl_otg_start_gadget(fsm, 0);
-+				fsl_otg_drv_vbus(1);
-+				fsl_otg_start_host(fsm, 1);
-+			}
-+
-+			return IRQ_HANDLED;
-+		}
-+	}
-+
-+	return IRQ_NONE;
-+}
-+
-+
-+static struct otg_fsm_ops fsl_otg_ops = {
-+	.chrg_vbus = fsl_otg_chrg_vbus,
-+	.drv_vbus = fsl_otg_drv_vbus,
-+	.loc_conn = fsl_otg_loc_conn,
-+	.loc_sof = fsl_otg_loc_sof,
-+	.start_pulse = fsl_otg_start_pulse,
-+
-+	.add_timer = fsl_otg_add_timer,
-+	.del_timer = fsl_otg_del_timer,
-+
-+	.start_host = fsl_otg_start_host,
-+	.start_gadget = fsl_otg_start_gadget,
-+};
-+
-+/* Initialize the global variable fsl_otg_dev and request IRQ for OTG */
-+int fsl_otg_cfg(struct platform_device *pdev)
-+{
-+	int status;
-+	struct fsl_otg *fsl_otg_tc;
-+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+	struct resource *res;
-+
-+	DBG("\n");
-+
-+	if (fsl_otg_dev)
-+		return 0;
-+
-+	/* allocate space to fsl otg device */
-+	fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL);
-+	if (!fsl_otg_tc)
-+		return -ENODEV;
-+
-+	if (pdata->regs) {
-+		fsl_otg_tc->dr_mem_map = pdata->regs;
-+	} else {
-+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+		if (!res) {
-+			dev_err(&pdev->dev, "no register addr.\n");
-+			return -ENODEV;
-+		}
-+
-+		/*
-+		printk("DDD %s(): rsrc_start=0x%x  rsrc_len=0x%x\n",
-+		     __FUNCTION__, res->start, res->end - res->start + 1);
-+		*/
-+
-+		if (!request_mem_region(res->start, res->end - res->start + 1,
-+					"OTG")) {
-+			dev_dbg(&pdev->dev, "request_mem_region failed\n");
-+			return -EBUSY;
-+		}
-+		fsl_otg_tc->dr_mem_map = ioremap(res->start,
-+						 res->end - res->start + 1);
-+	}
-+	DBG("set dr_mem_map to 0x%p\n", fsl_otg_tc->dr_mem_map);
-+
-+	INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event);
-+
-+	INIT_LIST_HEAD(&active_timers);
-+	fsl_otg_init_timers(&fsl_otg_tc->fsm);
-+
-+	/* Set OTG state machine operations */
-+	fsl_otg_tc->fsm.ops = &fsl_otg_ops;
-+
-+	/* record initial state of ID pin */
-+	fsl_otg_tc->fsm.id = (fsl_otg_tc->dr_mem_map->otgsc & OTGSC_STS_USB_ID)
-+	    ? 1 : 0;
-+	DBG("initial ID pin=%d\n", fsl_otg_tc->fsm.id);
-+
-+	/* initialize the otg structure */
-+	fsl_otg_tc->otg.label = DRIVER_DESC;
-+	fsl_otg_tc->otg.set_host = fsl_otg_set_host;
-+	fsl_otg_tc->otg.set_peripheral = fsl_otg_set_peripheral;
-+	fsl_otg_tc->otg.set_power = fsl_otg_set_power;
-+	fsl_otg_tc->otg.start_hnp = fsl_otg_start_hnp;
-+	fsl_otg_tc->otg.start_srp = fsl_otg_start_srp;
-+
-+	fsl_otg_dev = fsl_otg_tc;
-+
-+	/* Store the otg transceiver */
-+	status = otg_set_transceiver(&fsl_otg_tc->otg);
-+	if (status) {
-+		printk(KERN_WARNING ": unable to register OTG transceiver.\n");
-+		return status;
-+	}
-+
-+	return 0;
-+}
-+
-+/* OTG Initialization*/
-+int usb_otg_start(struct platform_device *pdev)
-+{
-+	struct fsl_otg *p_otg;
-+	struct otg_transceiver *otg_trans = otg_get_transceiver();
-+	struct otg_fsm *fsm;
-+	int status;
-+	u32 temp;
-+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+	int timeout;
-+
-+	DBG("\n");
-+
-+	p_otg = container_of(otg_trans, struct fsl_otg, otg);
-+	fsm = &p_otg->fsm;
-+
-+	/* Initialize the state machine structure with default values */
-+	SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED);
-+	fsm->transceiver = &p_otg->otg;
-+
-+	usb_dr_regs = p_otg->dr_mem_map;
-+	DBG("set usb_dr_regs to 0x%p\n", usb_dr_regs);
-+
-+	/* request irq */
-+	p_otg->irq = platform_get_irq(pdev, 0);
-+	status = request_irq(p_otg->irq, fsl_otg_isr,
-+				IRQF_SHARED, driver_name, p_otg);
-+	if (status) {
-+		dev_dbg(p_otg->otg.dev, "can't get IRQ %d, error %d\n",
-+			p_otg->irq, status);
-+		kfree(p_otg);
-+		return status;
-+	}
-+
-+
-+	/* stop the controller */
-+	temp = fsl_readl(&usb_dr_regs->usbcmd) & ~USB_CMD_RUN_STOP;
-+	fsl_writel(temp, &usb_dr_regs->usbcmd);
-+
-+	/* reset the controller */
-+	temp = fsl_readl(&usb_dr_regs->usbcmd);
-+	temp |= USB_CMD_CTRL_RESET;
-+	fsl_writel(temp, &usb_dr_regs->usbcmd);
-+
-+	/* wait reset completed */
-+	timeout = 500;
-+	while (timeout-- &&
-+		fsl_readl(&usb_dr_regs->usbcmd) & USB_CMD_CTRL_RESET)
-+		udelay(1);
-+	if (timeout <= 0)
-+		ERR("%s - USBCMD_RST never clear. Timeout is %d \n",
-+			__FUNCTION__, timeout);
-+
-+	/* configure the VBUSHS as IDLE(both host and device) */
-+	temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USBMODE_ES : 0);
-+	fsl_writel(temp, &usb_dr_regs->usbmode);
-+
-+	/* configure PHY interface */
-+	temp = fsl_readl(&usb_dr_regs->portsc1);
-+	temp &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PTW_8BIT);
-+
-+	/* DDD wrong xcvr setting stuff follows */
-+	temp |= PORTSCX_PTS_ULPI;
-+	fsl_writel(temp, &usb_dr_regs->portsc1);
-+
-+
-+	/* disable all interrupt and clear all OTGSC status */
-+	temp = fsl_readl(&usb_dr_regs->otgsc);
-+	temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK;
-+	temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE;
-+	fsl_writel(temp, &usb_dr_regs->otgsc);
-+
-+	fsl_otg_drv_vbus(0);
-+
-+	/*
-+	 * The identification (id) input is FALSE when a Mini-A plug is inserted
-+	 * in the devices Mini-AB receptacle. Otherwise, this input is TRUE.
-+	 * Also: record initial state of ID pin
-+	 */
-+	if (fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_USB_ID) {
-+		p_otg->otg.state = OTG_STATE_UNDEFINED;
-+		p_otg->fsm.id = 1;
-+	} else {
-+		p_otg->otg.state = OTG_STATE_A_IDLE;
-+		p_otg->fsm.id = 0;
-+	}
-+
-+	DBG("initial ID pin=%d\n", p_otg->fsm.id);
-+
-+	/* enable OTG ID pin interrupt */
-+	temp = fsl_readl(&usb_dr_regs->otgsc);
-+	temp |= OTGSC_IE_USB_ID;
-+	temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_IE_1ms_TIMER);
-+	fsl_writel(temp, &usb_dr_regs->otgsc);
-+
-+	return 0;
-+}
-+
-+/* Initialize board specific registers,PIB board,clock and pin multiplexing */
-+static int board_init(struct platform_device *pdev)
-+{
-+	struct fsl_usb2_platform_data *pdata;
-+	pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
-+
-+	/*
-+	 * do platform specific init: check the clock, grab/config pins, etc.
-+	 */
-+	if (pdata->platform_init(pdev) != 0)
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+/*-------------------------------------------------------------------------
-+		PROC File System Support
-+-------------------------------------------------------------------------*/
-+#ifdef CONFIG_USB_OTG_DEBUG_FILES
-+
-+#include <linux/seq_file.h>
-+
-+static const char proc_filename[] = "driver/fsl_usb2_otg";
-+
-+static int otg_proc_read(char *page, char **start, off_t off, int count,
-+			 int *eof, void *_dev)
-+{
-+	struct otg_fsm *fsm = &fsl_otg_dev->fsm;
-+	char *buf = page;
-+	char *next = buf;
-+	unsigned size = count;
-+	unsigned long flags;
-+	int t;
-+	u32 tmp_reg;
-+
-+	if (off != 0)
-+		return 0;
-+
-+	spin_lock_irqsave(&fsm->lock, flags);
-+
-+	/* ------basic driver infomation ---- */
-+	t = scnprintf(next, size,
-+		      DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n",
-+		      DRIVER_VERSION);
-+	size -= t;
-+	next += t;
-+
-+	/* ------ Registers ----- */
-+	/* tmp_reg = le32_to_cpu(usb_dr_regs->otgsc); */
-+	tmp_reg = fsl_readl(&usb_dr_regs->otgsc);
-+	t = scnprintf(next, size, "OTGSC reg: 0x%08x\n", tmp_reg);
-+	size -= t;
-+	next += t;
-+
-+	/* tmp_reg = le32_to_cpu(usb_dr_regs->portsc); */
-+	tmp_reg = fsl_readl(&usb_dr_regs->portsc1);
-+	t = scnprintf(next, size, "PORTSC reg: 0x%08x\n", tmp_reg);
-+	size -= t;
-+	next += t;
-+
-+	/* tmp_reg = le32_to_cpu(usb_dr_regs->usbmode); */
-+	tmp_reg = fsl_readl(&usb_dr_regs->usbmode);
-+	t = scnprintf(next, size, "USBMODE reg: 0x%08x\n", tmp_reg);
-+	size -= t;
-+	next += t;
-+
-+	/* tmp_reg = le32_to_cpu(usb_dr_regs->usbcmd); */
-+	tmp_reg = fsl_readl(&usb_dr_regs->usbcmd);
-+	t = scnprintf(next, size, "USBCMD reg: 0x%08x\n", tmp_reg);
-+	size -= t;
-+	next += t;
-+
-+	/* tmp_reg = le32_to_cpu(usb_dr_regs->usbsts); */
-+	tmp_reg = fsl_readl(&usb_dr_regs->usbsts);
-+	t = scnprintf(next, size, "USBSTS reg: 0x%08x\n", tmp_reg);
-+	size -= t;
-+	next += t;
-+
-+	/* ------ State ----- */
-+	t = scnprintf(next, size, "FSM protocol=%d %s\n", fsm->protocol,
-+		fsm->protocol ?
-+		(fsm->protocol == PROTO_HOST ? "Host" : "Gadget")
-+		: "None");
-+	size -= t;
-+	next += t;
-+
-+	t = scnprintf(next, size,
-+		      "OTG state: %s\n\n",
-+		      state_string(fsl_otg_dev->otg.state));
-+	size -= t;
-+	next += t;
-+
-+	/* ------ State Machine Variables ----- */
-+	t = scnprintf(next, size, "a_bus_req: %d\n", fsm->a_bus_req);
-+	size -= t;
-+	next += t;
-+
-+	t = scnprintf(next, size, "b_bus_req: %d\n", fsm->b_bus_req);
-+	size -= t;
-+	next += t;
-+
-+	t = scnprintf(next, size, "a_bus_resume: %d\n", fsm->a_bus_resume);
-+	size -= t;
-+	next += t;
-+
-+	t = scnprintf(next, size, "a_bus_suspend: %d\n", fsm->a_bus_suspend);
-+	size -= t;
-+	next += t;
-+
-+	t = scnprintf(next, size, "a_conn: %d\n", fsm->a_conn);
-+	size -= t;
-+	next += t;
-+
-+	t = scnprintf(next, size, "a_sess_vld: %d\n", fsm->a_sess_vld);
-+	size -= t;
-+	next += t;
-+
-+	t = scnprintf(next, size, "a_srp_det: %d\n", fsm->a_srp_det);
-+	size -= t;
-+	next += t;
-+
-+	t = scnprintf(next, size, "a_vbus_vld: %d\n", fsm->a_vbus_vld);
-+	size -= t;
-+	next += t;
-+
-+	t = scnprintf(next, size, "b_bus_resume: %d\n", fsm->b_bus_resume);
-+	size -= t;
-+	next += t;
-+
-+	t = scnprintf(next, size, "b_bus_suspend: %d\n", fsm->b_bus_suspend);
-+	size -= t;
-+	next += t;
-+
-+	t = scnprintf(next, size, "b_conn: %d\n", fsm->b_conn);
-+	size -= t;
-+	next += t;
-+
-+	t = scnprintf(next, size, "b_se0_srp: %d\n", fsm->b_se0_srp);
-+	size -= t;
-+	next += t;
-+
-+	t = scnprintf(next, size, "b_sess_end: %d\n", fsm->b_sess_end);
-+	size -= t;
-+	next += t;
-+
-+	t = scnprintf(next, size, "b_sess_vld: %d\n", fsm->b_sess_vld);
-+	size -= t;
-+	next += t;
-+
-+	t = scnprintf(next, size, "id: %d\n", fsm->id);
-+	size -= t;
-+	next += t;
-+
-+	spin_unlock_irqrestore(&fsm->lock, flags);
-+
-+	*eof = 1;
-+	return count - size;
-+}
-+
-+#define create_proc_file()	create_proc_read_entry(proc_filename, \
-+				0, NULL, otg_proc_read, NULL)
-+
-+#define remove_proc_file()	remove_proc_entry(proc_filename, NULL)
-+
-+#else				/* !CONFIG_USB_OTG_DEBUG_FILES */
-+
-+#define create_proc_file()	do {} while (0)
-+#define remove_proc_file()	do {} while (0)
-+
-+#endif				/*CONFIG_USB_OTG_DEBUG_FILES */
-+
-+/*----------------------------------------------------------*/
-+/* Char driver interface to control some OTG input */
-+
-+/*
-+ * This function handle some ioctl command,such as get otg
-+ * status and set host suspend
-+ */
-+static int fsl_otg_ioctl(struct inode *inode, struct file *file,
-+			 unsigned int cmd, unsigned long arg)
-+{
-+	u32 retval = 0;
-+
-+	switch (cmd) {
-+	case GET_OTG_STATUS:
-+		retval = fsl_otg_dev->host_working;
-+		break;
-+
-+	case SET_A_SUSPEND_REQ:
-+		fsl_otg_dev->fsm.a_suspend_req = arg;
-+		break;
-+
-+	case SET_A_BUS_DROP:
-+		fsl_otg_dev->fsm.a_bus_drop = arg;
-+		break;
-+
-+	case SET_A_BUS_REQ:
-+		fsl_otg_dev->fsm.a_bus_req = arg;
-+		break;
-+
-+	case SET_B_BUS_REQ:
-+		fsl_otg_dev->fsm.b_bus_req = arg;
-+		break;
-+
-+	default:
-+		break;
-+	}
-+
-+	otg_statemachine(&fsl_otg_dev->fsm);
-+
-+	return retval;
-+}
-+
-+static int fsl_otg_open(struct inode *inode, struct file *file)
-+{
-+
-+	return 0;
-+}
-+
-+static int fsl_otg_release(struct inode *inode, struct file *file)
-+{
-+
-+	return 0;
-+}
-+
-+static struct file_operations otg_fops = {
-+	.owner = THIS_MODULE,
-+	.llseek = NULL,
-+	.read = NULL,
-+	.write = NULL,
-+	.ioctl = fsl_otg_ioctl,
-+	.open = fsl_otg_open,
-+	.release = fsl_otg_release,
-+};
-+
-+static int __init fsl_otg_probe(struct platform_device *pdev)
-+{
-+	int status;
-+	struct fsl_usb2_platform_data *pdata;
-+
-+	DBG("pdev=0x%p\n", pdev);
-+
-+	if (!pdev)
-+		return -ENODEV;
-+
-+	if (!pdev->dev.platform_data)
-+		return -ENOMEM;
-+
-+	pdata = pdev->dev.platform_data;
-+	/* Initialize the clock, multiplexing pin and PHY interface */
-+	board_init(pdev);
-+
-+	/* configure the OTG */
-+	status = fsl_otg_cfg(pdev);
-+	if (status) {
-+		printk(KERN_INFO "Couldn't init OTG module\n");
-+		return -status;
-+	}
-+
-+	/* start OTG */
-+	status = usb_otg_start(pdev);
-+
-+	if (register_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME, &otg_fops)) {
-+		printk(KERN_WARNING FSL_OTG_NAME
-+		       ": unable to register FSL OTG device\n");
-+		return -EIO;
-+	}
-+
-+	create_proc_file();
-+	return status;
-+}
-+
-+static int fsl_otg_remove(struct platform_device *pdev)
-+{
-+	u32 ie;
-+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-+	unsigned long flags;
-+
-+	DBG("pdev=0x%p  pdata=0x%p\n", pdev, pdata);
-+
-+	otg_set_transceiver(NULL);
-+
-+	/* disable and clear OTGSC interrupts */
-+	spin_lock_irqsave(&usb_dr_regs_lock, flags);
-+	ie = fsl_readl(&usb_dr_regs->otgsc);
-+	ie &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK;
-+	ie |= OTGSC_INTERRUPT_STATUS_BITS_MASK;
-+	fsl_writel(ie, &usb_dr_regs->otgsc);
-+	spin_unlock_irqrestore(&usb_dr_regs_lock, flags);
-+
-+	free_irq(fsl_otg_dev->irq, fsl_otg_dev);
-+
-+	kfree(fsl_otg_dev);
-+
-+	remove_proc_file();
-+
-+	unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME);
-+
-+	if (pdata->platform_uninit)
-+		pdata->platform_uninit(pdev);
-+
-+	fsl_otg_dev = NULL;
-+	return 0;
-+}
-+
-+struct platform_driver fsl_otg_driver = {
-+	.probe = fsl_otg_probe,
-+	.remove = fsl_otg_remove,
-+	.driver = {
-+		.name  = driver_name,
-+		.owner = THIS_MODULE,
-+	},
-+};
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int __init fsl_usb_otg_init(void)
-+{
-+	printk(KERN_INFO DRIVER_DESC " loaded, %s\n", DRIVER_VERSION);
-+	return platform_driver_register(&fsl_otg_driver);
-+}
-+
-+static void __exit fsl_usb_otg_exit(void)
-+{
-+	platform_driver_unregister(&fsl_otg_driver);
-+}
-+
-+module_init(fsl_usb_otg_init);
-+module_exit(fsl_usb_otg_exit);
-+
-+MODULE_DESCRIPTION(DRIVER_INFO);
-+MODULE_AUTHOR(DRIVER_AUTHOR);
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/usb/otg/fsl_otg.h
-@@ -0,0 +1,139 @@
-+/*
-+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+
-+/*
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+#ifndef FSL_OTG_H
-+#define FSL_OTG_H
-+#include <linux/usb/otg.h>
-+#include "otg_fsm.h"
-+#include <linux/ioctl.h>
-+
-+#define ERR(format, arg...) \
-+printk(KERN_ERR "%s:%s: " format "\n" , __FILE__,  __FUNCTION__ , ## arg)
-+
-+/*
-+ *  A-DEVICE timing  constants
-+ */
-+
-+/* Wait for VBUS Rise  */
-+#define TA_WAIT_VRISE	(100)	/* a_wait_vrise 100 ms, section: 6.6.5.1 */
-+
-+/* Wait for B-Connect */
-+#define TA_WAIT_BCON	(10000)	/* a_wait_bcon > 1 sec, section: 6.6.5.2
-+				 * This is only used to get out of
-+				 * OTG_STATE_A_WAIT_BCON state if there was
-+				 * no connection for these many milliseconds
-+				 */
-+
-+/* A-Idle to B-Disconnect */
-+/* It is necessary for this timer to be more than 750 ms because of a bug in OPT
-+ * test 5.4 in which B OPT disconnects after 750 ms instead of 75ms as stated
-+ * in the test description
-+ */
-+#define TA_AIDL_BDIS	(5000)	/* a_suspend minimum 200 ms, section: 6.6.5.3 */
-+
-+/* B-Idle to A-Disconnect */
-+#define TA_BIDL_ADIS	(12)	/* 3 to 200 ms */
-+
-+/* B-device timing constants */
-+
-+/* Data-Line Pulse Time*/
-+#define TB_DATA_PLS	(10)	/* b_srp_init,continue 5~10ms, section:5.3.3 */
-+#define TB_DATA_PLS_MIN	(5)	/* minimum 5 ms */
-+#define TB_DATA_PLS_MAX	(10)	/* maximum 10 ms */
-+
-+/* SRP Initiate Time  */
-+#define TB_SRP_INIT	(100)	/* b_srp_init,maximum 100 ms, section:5.3.8 */
-+
-+/* SRP Fail Time  */
-+#define TB_SRP_FAIL	(7000)	/* b_srp_init,Fail time 5~30s, section:6.8.2.2 */
-+
-+/* SRP result wait time */
-+#define TB_SRP_WAIT	(60)
-+
-+/* VBus time */
-+#define TB_VBUS_PLS	(30)	/* time to keep vbus pulsing asserted */
-+
-+/* Discharge time */
-+/* This time should be less than 10ms. It varies from system to system. */
-+#define TB_VBUS_DSCHRG	(8)
-+
-+/* A-SE0 to B-Reset  */
-+#define TB_ASE0_BRST	(20)	/* b_wait_acon, mini 3.125 ms,section:6.8.2.4 */
-+
-+/* A bus suspend timer before we can switch to b_wait_aconn */
-+#define TB_A_SUSPEND	(7)
-+#define TB_BUS_RESUME	(12)
-+
-+/* SE0 Time Before SRP */
-+#define TB_SE0_SRP	(2)	/* b_idle,minimum 2 ms, section:5.3.2 */
-+
-+#define SET_OTG_STATE(otg_ptr, newstate)	((otg_ptr)->state = newstate)
-+
-+
-+struct fsl_otg_timer {
-+	unsigned long expires;	/* Number of count increase to timeout */
-+	unsigned long count;	/* Tick counter */
-+	void (*function) (unsigned long);	/* Timeout function */
-+	unsigned long data;	/* Data passed to function */
-+	struct list_head list;
-+};
-+
-+struct fsl_otg_timer inline *otg_timer_initializer
-+    (void (*function) (unsigned long), unsigned long expires,
-+     unsigned long data) {
-+	struct fsl_otg_timer *timer;
-+	timer = kmalloc(sizeof(struct fsl_otg_timer), GFP_KERNEL);
-+	if (timer == NULL)
-+		return NULL;
-+	timer->function = function;
-+	timer->expires = expires;
-+	timer->data = data;
-+	return timer;
-+}
-+
-+struct fsl_otg {
-+	struct otg_transceiver otg;
-+	struct otg_fsm fsm;
-+	struct fsl_usb_device_regs *dr_mem_map;
-+	struct delayed_work otg_event;
-+
-+	/*used for usb host */
-+	u8 host_working;
-+	u8 on_off;
-+
-+	int irq;
-+};
-+
-+struct fsl_otg_config {
-+	u8 otg_port;
-+};
-+
-+/*For SRP and HNP handle*/
-+#define FSL_OTG_MAJOR	66
-+#define FSL_OTG_NAME	"fsl-otg"
-+/*Command to OTG driver(ioctl)*/
-+#define OTG_IOCTL_MAGIC		FSL_OTG_MAJOR
-+/*if otg work as host,it should return 1,otherwise it return 0*/
-+#define GET_OTG_STATUS		_IOR(OTG_IOCTL_MAGIC, 1, int)
-+#define SET_A_SUSPEND_REQ	_IOW(OTG_IOCTL_MAGIC, 2, int)
-+#define SET_A_BUS_DROP		_IOW(OTG_IOCTL_MAGIC, 3, int)
-+#define SET_A_BUS_REQ		_IOW(OTG_IOCTL_MAGIC, 4, int)
-+#define SET_B_BUS_REQ		_IOW(OTG_IOCTL_MAGIC, 5, int)
-+#define GET_A_SUSPEND_REQ	_IOR(OTG_IOCTL_MAGIC, 6, int)
-+#define GET_A_BUS_DROP		_IOR(OTG_IOCTL_MAGIC, 7, int)
-+#define GET_A_BUS_REQ		_IOR(OTG_IOCTL_MAGIC, 8, int)
-+#define GET_B_BUS_REQ		_IOR(OTG_IOCTL_MAGIC, 9, int)
-+
-+
-+/********************************************************************/
-+#endif
---- /dev/null
-+++ b/drivers/usb/otg/Makefile
-@@ -0,0 +1,5 @@
-+#
-+# Makefile for USB OTG controller  driver
-+#
-+fsl_usb2_otg-objs		:= fsl_otg.o otg_fsm.o
-+obj-y				+= fsl_usb2_otg.o
---- /dev/null
-+++ b/drivers/usb/otg/otg_fsm.c
-@@ -0,0 +1,381 @@
-+/* OTG Finite State Machine from OTG spec
-+ *
-+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
-+ *
-+ * Author: 	Li Yang <LeoLi@freescale.com>
-+ * 		Jerry Huang <Chang-Ming.Huang@freescale.com>
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the  GNU General Public License along
-+ * with this program; if not, write  to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/usb/otg.h>
-+#include <linux/spinlock.h>
-+#include <linux/delay.h>
-+#include <linux/usb.h>
-+#include <linux/usb_gadget.h>
-+
-+#include "otg_fsm.h"
-+
-+
-+/* Defined by device specific driver, for different timer implementation */
-+extern void *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr,
-+	*b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_fail_tmr, *a_wait_enum_tmr;
-+
-+const char *state_string(enum usb_otg_state state)
-+{
-+	switch (state) {
-+	case OTG_STATE_A_IDLE:		return "a_idle";
-+	case OTG_STATE_A_WAIT_VRISE:	return "a_wait_vrise";
-+	case OTG_STATE_A_WAIT_BCON:	return "a_wait_bcon";
-+	case OTG_STATE_A_HOST:		return "a_host";
-+	case OTG_STATE_A_SUSPEND:	return "a_suspend";
-+	case OTG_STATE_A_PERIPHERAL:	return "a_peripheral";
-+	case OTG_STATE_A_WAIT_VFALL:	return "a_wait_vfall";
-+	case OTG_STATE_A_VBUS_ERR:	return "a_vbus_err";
-+	case OTG_STATE_B_IDLE:		return "b_idle";
-+	case OTG_STATE_B_SRP_INIT:	return "b_srp_init";
-+	case OTG_STATE_B_PERIPHERAL:	return "b_peripheral";
-+	case OTG_STATE_B_WAIT_ACON:	return "b_wait_acon";
-+	case OTG_STATE_B_HOST:		return "b_host";
-+	default:			return "UNDEFINED";
-+	}
-+}
-+EXPORT_SYMBOL(state_string);
-+
-+/* Change USB protocol when there is a protocol change */
-+static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
-+{
-+	int ret = 0;
-+
-+	VDBG("DDD old fsm->protocol= %d; new protocol= %d\n",
-+		     fsm->protocol, protocol);
-+	if (fsm->protocol != protocol) {
-+		VDBG("Changing role fsm->protocol= %d; new protocol= %d\n",
-+				fsm->protocol, protocol);
-+		/* stop old protocol */
-+		if (fsm->protocol == PROTO_HOST)
-+			ret = fsm->ops->start_host(fsm, 0);
-+		else if (fsm->protocol == PROTO_GADGET)
-+			ret = fsm->ops->start_gadget(fsm, 0);
-+		if (ret)
-+			return ret;
-+
-+		/* start new protocol */
-+		if (protocol == PROTO_HOST)
-+			ret = fsm->ops->start_host(fsm, 1);
-+		else if (protocol == PROTO_GADGET)
-+			ret = fsm->ops->start_gadget(fsm, 1);
-+		if (ret)
-+			return ret;
-+
-+		fsm->protocol = protocol;
-+		return 0;
-+	}
-+
-+	return 0;
-+}
-+
-+static int state_changed;
-+
-+/* Called when leaving a state.  Do state clean up jobs here */
-+static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
-+{
-+	switch (old_state) {
-+	case OTG_STATE_B_IDLE:
-+		otg_del_timer(fsm, fsm->b_se0_srp_tmr);
-+		fsm->b_se0_srp = 0;
-+		break;
-+	case OTG_STATE_B_SRP_INIT:
-+		fsm->b_srp_done = 0;
-+		break;
-+	case OTG_STATE_B_PERIPHERAL:
-+		break;
-+	case OTG_STATE_B_WAIT_ACON:
-+		otg_del_timer(fsm, fsm->b_ase0_brst_tmr);
-+		fsm->b_ase0_brst_tmout = 0;
-+		break;
-+	case OTG_STATE_B_HOST:
-+		break;
-+	case OTG_STATE_A_IDLE:
-+		break;
-+	case OTG_STATE_A_WAIT_VRISE:
-+		otg_del_timer(fsm, fsm->a_wait_vrise_tmr);
-+		fsm->a_wait_vrise_tmout = 0;
-+		break;
-+	case OTG_STATE_A_WAIT_BCON:
-+		otg_del_timer(fsm, fsm->a_wait_bcon_tmr);
-+		fsm->a_wait_bcon_tmout = 0;
-+		break;
-+	case OTG_STATE_A_HOST:
-+		otg_del_timer(fsm, fsm->a_wait_enum_tmr);
-+		break;
-+	case OTG_STATE_A_SUSPEND:
-+		otg_del_timer(fsm, fsm->a_aidl_bdis_tmr);
-+		fsm->a_aidl_bdis_tmout = 0;
-+		fsm->a_suspend_req = 0;
-+		fsm->a_bus_req = 1;	/* FIXME */
-+		break;
-+	case OTG_STATE_A_PERIPHERAL:
-+		break;
-+	case OTG_STATE_A_WAIT_VFALL:
-+		otg_del_timer(fsm, fsm->a_wait_vrise_tmr);
-+		break;
-+	case OTG_STATE_A_VBUS_ERR:
-+		break;
-+	default:
-+		break;
-+	}
-+}
-+
-+/* Called when entering a state */
-+static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
-+{
-+	state_changed = 1;
-+	VDBG("State: old=%s new=%s \n",
-+		state_string(fsm->transceiver->state), state_string(new_state));
-+
-+	if (fsm->transceiver->state == new_state)
-+		return 0;
-+
-+	otg_leave_state(fsm, fsm->transceiver->state);
-+	switch (new_state) {
-+	case OTG_STATE_B_IDLE:
-+		otg_drv_vbus(fsm, 0);
-+		otg_chrg_vbus(fsm, 0);
-+		otg_loc_conn(fsm, 0);
-+		otg_loc_sof(fsm, 0);
-+		otg_set_protocol(fsm, PROTO_UNDEF);
-+		otg_add_timer(fsm, fsm->b_se0_srp_tmr);
-+		break;
-+	case OTG_STATE_B_SRP_INIT:
-+		otg_start_pulse(fsm);
-+		otg_loc_sof(fsm, 0);
-+		otg_set_protocol(fsm, PROTO_UNDEF);
-+		otg_add_timer(fsm, fsm->b_srp_fail_tmr);
-+		break;
-+	case OTG_STATE_B_PERIPHERAL:
-+		otg_chrg_vbus(fsm, 0);
-+		otg_loc_conn(fsm, 1);
-+		otg_loc_sof(fsm, 0);
-+		otg_set_protocol(fsm, PROTO_GADGET);
-+		break;
-+	case OTG_STATE_B_WAIT_ACON:
-+		otg_chrg_vbus(fsm, 0);
-+		otg_loc_conn(fsm, 0);
-+		otg_loc_sof(fsm, 0);
-+		otg_set_protocol(fsm, PROTO_HOST);
-+		otg_add_timer(fsm, fsm->b_ase0_brst_tmr);
-+		fsm->a_bus_suspend = 0;
-+		break;
-+	case OTG_STATE_B_HOST:
-+		otg_chrg_vbus(fsm, 0);
-+		otg_loc_conn(fsm, 0);
-+		otg_loc_sof(fsm, 1);
-+		otg_set_protocol(fsm, PROTO_HOST);
-+		usb_bus_start_enum(fsm->transceiver->host,
-+				   fsm->transceiver->host->otg_port);
-+		break;
-+	case OTG_STATE_A_IDLE:
-+		otg_drv_vbus(fsm, 0);
-+		otg_chrg_vbus(fsm, 0);
-+		otg_loc_conn(fsm, 0);
-+		otg_loc_sof(fsm, 0);
-+		otg_set_protocol(fsm, PROTO_HOST);
-+		break;
-+	case OTG_STATE_A_WAIT_VRISE:
-+		otg_drv_vbus(fsm, 1);
-+		otg_loc_conn(fsm, 0);
-+		otg_loc_sof(fsm, 0);
-+		otg_set_protocol(fsm, PROTO_HOST);
-+		otg_add_timer(fsm, fsm->a_wait_vrise_tmr);
-+		break;
-+	case OTG_STATE_A_WAIT_BCON:
-+		otg_drv_vbus(fsm, 1);
-+		otg_loc_conn(fsm, 0);
-+		otg_loc_sof(fsm, 0);
-+		otg_set_protocol(fsm, PROTO_HOST);
-+		otg_add_timer(fsm, fsm->a_wait_bcon_tmr);
-+		break;
-+	case OTG_STATE_A_HOST:
-+		otg_drv_vbus(fsm, 1);
-+		otg_loc_conn(fsm, 0);
-+		otg_loc_sof(fsm, 1);
-+		otg_set_protocol(fsm, PROTO_HOST);
-+		/*
-+		 * When HNP is triggered while a_bus_req = 0, a_host will
-+		 * suspend too fast to complete a_set_b_hnp_en
-+		 */
-+		if (!fsm->a_bus_req || fsm->a_suspend_req)
-+			otg_add_timer(fsm, fsm->a_wait_enum_tmr);
-+		break;
-+	case OTG_STATE_A_SUSPEND:
-+		otg_drv_vbus(fsm, 1);
-+		otg_loc_conn(fsm, 0);
-+		otg_loc_sof(fsm, 0);
-+		otg_set_protocol(fsm, PROTO_HOST);
-+		otg_add_timer(fsm, fsm->a_aidl_bdis_tmr);
-+
-+		break;
-+	case OTG_STATE_A_PERIPHERAL:
-+		otg_loc_conn(fsm, 1);
-+		otg_loc_sof(fsm, 0);
-+		otg_set_protocol(fsm, PROTO_GADGET);
-+		otg_drv_vbus(fsm, 1);
-+		break;
-+	case OTG_STATE_A_WAIT_VFALL:
-+		otg_drv_vbus(fsm, 0);
-+		otg_loc_conn(fsm, 0);
-+		otg_loc_sof(fsm, 0);
-+		otg_set_protocol(fsm, PROTO_HOST);
-+		break;
-+	case OTG_STATE_A_VBUS_ERR:
-+		otg_drv_vbus(fsm, 0);
-+		otg_loc_conn(fsm, 0);
-+		otg_loc_sof(fsm, 0);
-+		otg_set_protocol(fsm, PROTO_UNDEF);
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	fsm->transceiver->state = new_state;
-+	return 0;
-+}
-+
-+/* State change judgement */
-+int otg_statemachine(struct otg_fsm *fsm)
-+{
-+	enum usb_otg_state state;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&fsm->lock, flags);
-+
-+	state = fsm->transceiver->state;
-+	state_changed = 0;
-+	/* State machine state change judgement */
-+
-+	VDBG(" State: %s \n", state_string(state));
-+
-+	switch (state) {
-+	case OTG_STATE_UNDEFINED:
-+		if (fsm->id)
-+			otg_set_state(fsm, OTG_STATE_B_IDLE);
-+		else
-+			otg_set_state(fsm, OTG_STATE_A_IDLE);
-+		break;
-+	case OTG_STATE_B_IDLE:
-+		if (!fsm->id)
-+			otg_set_state(fsm, OTG_STATE_A_IDLE);
-+		else if (fsm->b_sess_vld && fsm->transceiver->gadget)
-+			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
-+		else if (fsm->b_bus_req && fsm->b_sess_end && fsm->b_se0_srp)
-+			otg_set_state(fsm, OTG_STATE_B_SRP_INIT);
-+		break;
-+	case OTG_STATE_B_SRP_INIT:
-+		if (!fsm->id || fsm->b_srp_done)
-+			otg_set_state(fsm, OTG_STATE_B_IDLE);
-+		break;
-+	case OTG_STATE_B_PERIPHERAL:
-+		if (!fsm->id || !fsm->b_sess_vld)
-+			otg_set_state(fsm, OTG_STATE_B_IDLE);
-+		else if (fsm->b_bus_req &&
-+			 fsm->transceiver->
-+			 gadget->b_hnp_enable && fsm->a_bus_suspend)
-+			otg_set_state(fsm, OTG_STATE_B_WAIT_ACON);
-+		break;
-+	case OTG_STATE_B_WAIT_ACON:
-+		if (fsm->a_conn)
-+			otg_set_state(fsm, OTG_STATE_B_HOST);
-+		else if (!fsm->id || !fsm->b_sess_vld)
-+			otg_set_state(fsm, OTG_STATE_B_IDLE);
-+		else if (fsm->a_bus_resume || fsm->b_ase0_brst_tmout) {
-+			fsm->b_ase0_brst_tmout = 0;
-+			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
-+		}
-+		break;
-+	case OTG_STATE_B_HOST:
-+		if (!fsm->id || !fsm->b_sess_vld)
-+			otg_set_state(fsm, OTG_STATE_B_IDLE);
-+		else if (!fsm->b_bus_req || !fsm->a_conn)
-+			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
-+		break;
-+	case OTG_STATE_A_IDLE:
-+		if (fsm->id)
-+			otg_set_state(fsm, OTG_STATE_B_IDLE);
-+		else if (!fsm->a_bus_drop && (fsm->a_bus_req || fsm->a_srp_det))
-+			otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE);
-+		break;
-+	case OTG_STATE_A_WAIT_VRISE:
-+		if (fsm->id || fsm->a_bus_drop || fsm->a_vbus_vld ||
-+		    fsm->a_wait_vrise_tmout) {
-+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
-+		}
-+		break;
-+	case OTG_STATE_A_WAIT_BCON:
-+		if (!fsm->a_vbus_vld)
-+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
-+		else if (fsm->id | fsm->a_bus_drop | fsm->a_wait_bcon_tmout)
-+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
-+		else if (fsm->b_conn)
-+			otg_set_state(fsm, OTG_STATE_A_HOST);
-+		break;
-+	case OTG_STATE_A_HOST:
-+		if ((!fsm->a_bus_req || fsm->a_suspend_req) &&
-+		    fsm->transceiver->host->b_hnp_enable)
-+			otg_set_state(fsm, OTG_STATE_A_SUSPEND);
-+		else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop)
-+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
-+		else if (!fsm->a_vbus_vld)
-+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
-+		break;
-+	case OTG_STATE_A_SUSPEND:
-+		if (!fsm->b_conn && fsm->transceiver->host->b_hnp_enable)
-+			otg_set_state(fsm, OTG_STATE_A_PERIPHERAL);
-+		else if (!fsm->b_conn && !fsm->transceiver->host->b_hnp_enable)
-+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
-+		else if (fsm->a_bus_req || fsm->b_bus_resume)
-+			otg_set_state(fsm, OTG_STATE_A_HOST);
-+		else if (fsm->id || fsm->a_bus_drop || fsm->a_aidl_bdis_tmout)
-+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
-+		else if (!fsm->a_vbus_vld)
-+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
-+		break;
-+	case OTG_STATE_A_PERIPHERAL:
-+		if (fsm->id || fsm->a_bus_drop)
-+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
-+		else if (fsm->b_bus_suspend)
-+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
-+		else if (!fsm->a_vbus_vld)
-+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
-+		break;
-+	case OTG_STATE_A_WAIT_VFALL:
-+		if (fsm->id || fsm->a_bus_req || (!fsm->a_sess_vld &&
-+						  !fsm->b_conn))
-+			otg_set_state(fsm, OTG_STATE_A_IDLE);
-+		break;
-+	case OTG_STATE_A_VBUS_ERR:
-+		if (fsm->id || fsm->a_bus_drop || fsm->a_clr_err)
-+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
-+		break;
-+	default:
-+		break;
-+	}
-+	spin_unlock_irqrestore(&fsm->lock, flags);
-+
-+	return state_changed;
-+}
-+EXPORT_SYMBOL(otg_statemachine);
---- /dev/null
-+++ b/drivers/usb/otg/otg_fsm.h
-@@ -0,0 +1,170 @@
-+/* Copyright (C) 2006-2007 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the  GNU General Public License along
-+ * with this program; if not, write  to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#ifndef OTG_FSM_H
-+#define OTG_FSM_H
-+
-+#if 0
-+#define DEBUG 	1
-+#define VERBOSE 	1
-+#endif
-+
-+#ifdef DEBUG
-+#define DBG(fmt, args...) 	printk(KERN_DEBUG "[%s]  " fmt , \
-+				__FUNCTION__, ## args)
-+#else
-+#define DBG(fmt, args...)	do {} while (0)
-+#endif
-+
-+#ifdef VERBOSE
-+#define VDBG		DBG
-+#else
-+#define VDBG(stuff...)	do {} while (0)
-+#endif
-+
-+#ifdef VERBOSE
-+#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__)
-+#else
-+#define MPC_LOC do {} while (0)
-+#endif
-+
-+#define PROTO_UNDEF	0
-+#define PROTO_HOST	1
-+#define PROTO_GADGET	2
-+
-+
-+
-+
-+
-+/* OTG state machine according to the OTG spec */
-+struct otg_fsm {
-+	/* Input */
-+	int a_bus_resume;
-+	int a_bus_suspend;
-+	int a_conn;
-+	int a_sess_vld;
-+	int a_srp_det;
-+	int a_vbus_vld;
-+	int b_bus_resume;
-+	int b_bus_suspend;
-+	int b_conn;
-+	int b_se0_srp;
-+	int b_sess_end;
-+	int b_sess_vld;
-+	int id;
-+
-+	/* Internal variables */
-+	int a_set_b_hnp_en;
-+	int b_srp_done;
-+	int b_hnp_enable;
-+
-+	/* Timeout indicator for timers */
-+	int a_wait_vrise_tmout;
-+	int a_wait_bcon_tmout;
-+	int a_aidl_bdis_tmout;
-+	int b_ase0_brst_tmout;
-+
-+	/* Informative variables */
-+	int a_bus_drop;
-+	int a_bus_req;
-+	int a_clr_err;
-+	int a_suspend_req;
-+	int b_bus_req;
-+
-+	/* Output */
-+	int drv_vbus;
-+	int loc_conn;
-+	int loc_sof;
-+
-+	struct otg_fsm_ops *ops;
-+	struct otg_transceiver *transceiver;
-+
-+	void *a_wait_vrise_tmr;
-+	void *a_wait_bcon_tmr;
-+	void *a_aidl_bdis_tmr;
-+	void *b_ase0_brst_tmr;
-+	void *b_se0_srp_tmr;
-+	void *b_srp_fail_tmr;
-+	void *a_wait_enum_tmr;
-+
-+	/* Current usb protocol used: 0:undefine; 1:host; 2:client */
-+	int protocol;
-+	spinlock_t lock;		/* fsm lock */
-+};
-+
-+struct otg_fsm_ops {
-+	void 	(*chrg_vbus)(int on);
-+	void 	(*drv_vbus)(int on);
-+	void 	(*loc_conn)(int on);
-+	void 	(*loc_sof)(int on);
-+	void	(*start_pulse)(void);
-+	void	(*add_timer)(void *timer);
-+	void	(*del_timer)(void *timer);
-+	int	(*start_host)(struct otg_fsm *fsm, int on);
-+	int	(*start_gadget)(struct otg_fsm *fsm, int on);
-+};
-+
-+
-+static inline void otg_chrg_vbus(struct otg_fsm *fsm, int on)
-+{
-+	fsm->ops->chrg_vbus(on);
-+}
-+
-+static inline void otg_drv_vbus(struct otg_fsm *fsm, int on)
-+{
-+	if (fsm->drv_vbus != on) {
-+		fsm->drv_vbus = on;
-+		fsm->ops->drv_vbus(on);
-+	}
-+}
-+
-+static inline void otg_loc_conn(struct otg_fsm *fsm, int on)
-+{
-+	if (fsm->loc_conn != on) {
-+		fsm->loc_conn = on;
-+		fsm->ops->loc_conn(on);
-+	}
-+}
-+
-+static inline void otg_loc_sof(struct otg_fsm *fsm, int on)
-+{
-+	if (fsm->loc_sof != on) {
-+		fsm->loc_sof = on;
-+		fsm->ops->loc_sof(on);
-+	}
-+}
-+
-+static inline void otg_start_pulse(struct otg_fsm *fsm)
-+{
-+	fsm->ops->start_pulse();
-+}
-+
-+static inline void otg_add_timer(struct otg_fsm *fsm, void *timer)
-+{
-+	fsm->ops->add_timer(timer);
-+}
-+
-+static inline void otg_del_timer(struct otg_fsm *fsm, void *timer)
-+{
-+	fsm->ops->del_timer(timer);
-+}
-+
-+extern int otg_statemachine(struct otg_fsm *fsm);
-+
-+extern const char *state_string(enum usb_otg_state state);
-+
-+#endif
---- a/drivers/video/cfbimgblt.c
-+++ b/drivers/video/cfbimgblt.c
-@@ -44,12 +44,12 @@
- #endif
- 
- static const u32 cfb_tab8[] = {
--#if defined(__BIG_ENDIAN)
-+#if defined(__BIG_ENDIAN) && !defined(CONFIG_COLDFIRE)
-     0x00000000,0x000000ff,0x0000ff00,0x0000ffff,
-     0x00ff0000,0x00ff00ff,0x00ffff00,0x00ffffff,
-     0xff000000,0xff0000ff,0xff00ff00,0xff00ffff,
-     0xffff0000,0xffff00ff,0xffffff00,0xffffffff
--#elif defined(__LITTLE_ENDIAN)
-+#elif defined(__LITTLE_ENDIAN) || defined(CONFIG_COLDFIRE)
-     0x00000000,0xff000000,0x00ff0000,0xffff0000,
-     0x0000ff00,0xff00ff00,0x00ffff00,0xffffff00,
-     0x000000ff,0xff0000ff,0x00ff00ff,0xffff00ff,
-@@ -60,9 +60,9 @@ static const u32 cfb_tab8[] = {
- };
- 
- static const u32 cfb_tab16[] = {
--#if defined(__BIG_ENDIAN)
-+#if defined(__BIG_ENDIAN) && !defined(CONFIG_COLDFIRE)
-     0x00000000, 0x0000ffff, 0xffff0000, 0xffffffff
--#elif defined(__LITTLE_ENDIAN)
-+#elif defined(__LITTLE_ENDIAN) || defined(CONFIG_COLDFIRE)
-     0x00000000, 0xffff0000, 0x0000ffff, 0xffffffff
- #else
- #error FIXME: No endianness??
---- a/drivers/video/console/bitblit.c
-+++ b/drivers/video/console/bitblit.c
-@@ -78,7 +78,11 @@ static inline void bit_putcs_aligned(str
- 				     u32 d_pitch, u32 s_pitch, u32 cellsize,
- 				     struct fb_image *image, u8 *buf, u8 *dst)
- {
-+#ifndef CONFIG_COLDFIRE
- 	u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
-+#else
-+        u32 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
-+#endif
- 	u32 idx = vc->vc_font.width >> 3;
- 	u8 *src;
- 
-@@ -111,7 +115,11 @@ static inline void bit_putcs_unaligned(s
- 				       struct fb_image *image, u8 *buf,
- 				       u8 *dst)
- {
-+#ifndef CONFIG_COLDFIRE
- 	u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
-+#else
-+        u32 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
-+#endif
- 	u32 shift_low = 0, mod = vc->vc_font.width % 8;
- 	u32 shift_high = 8;
- 	u32 idx = vc->vc_font.width >> 3;
-@@ -238,7 +246,11 @@ static void bit_cursor(struct vc_data *v
- {
- 	struct fb_cursor cursor;
- 	struct fbcon_ops *ops = info->fbcon_par;
-+#ifndef CONFIG_COLDFIRE
- 	unsigned short charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
-+#else
-+        unsigned long charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
-+#endif
- 	int w = (vc->vc_font.width + 7) >> 3, c;
- 	int y = real_y(ops->p, vc->vc_y);
- 	int attribute, use_sw = (vc->vc_cursor_type & 0x10);
---- a/drivers/video/console/fbcon.c
-+++ b/drivers/video/console/fbcon.c
-@@ -2679,8 +2679,11 @@ static int fbcon_set_palette(struct vc_d
- {
- 	struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]];
- 	int i, j, k, depth;
--	u8 val;
--
-+#ifndef CONFIG_COLDFIRE
-+        u8 val;
-+#else
-+        u32 val;
-+#endif
- 	if (fbcon_is_inactive(vc, info))
- 		return -EINVAL;
- 
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -201,6 +201,16 @@ config FB_TILEBLITTING
- comment "Frame buffer hardware drivers"
- 	depends on FB
- 
-+config FB_SMI
-+	tristate "SiliconMotion Lynx support"
-+	depends on FB && PCI
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	---help---
-+	  This enables support for the Silicon Motion Lynx family of graphic
-+	  chips. It has been tested on ColdFire.
-+
- config FB_CIRRUS
- 	tristate "Cirrus Logic support"
- 	depends on FB && (ZORRO || PCI)
---- a/drivers/video/Makefile
-+++ b/drivers/video/Makefile
-@@ -28,6 +28,7 @@ obj-$(CONFIG_FB_DDC)           += fb_ddc
- obj-$(CONFIG_FB_DEFERRED_IO)   += fb_defio.o
- 
- # Hardware specific drivers go first
-+obj-$(CONFIG_FB_SMI)              += smifb.o
- obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p.o
- obj-$(CONFIG_FB_ARC)              += arcfb.o
- obj-$(CONFIG_FB_CLPS711X)         += clps711xfb.o
---- /dev/null
-+++ b/drivers/video/smifb.c
-@@ -0,0 +1,949 @@
-+/***************************************************************************
-+        smifb.c  -  Silicon Motion, Inc. LynxEM+ frame buffer device
-+                             -------------------
-+    begin                : Thu Aug 9 2001
-+    copyright            : (C) 2001 by Szu-Tao Huang
-+    email                : johuang@siliconmotion.com
-+ ***************************************************************************/
-+
-+/***************************************************************************
-+ *                                                                         *
-+ *   This program is free software; you can redistribute it and/or modify  *
-+ *   it under the terms of the GNU General Public License as published by  *
-+ *   the Free Software Foundation; either version 2 of the License, or     *
-+ *   (at your option) any later version.                                   *
-+ *                                                                         *
-+ ***************************************************************************/
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/tty.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/fb.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/pgtable.h>
-+#include <asm/system.h>
-+#include <asm/uaccess.h>
-+
-+#include "console/fbcon.h"
-+
-+/*
-+#include <video/fbcon.h>
-+#include <video/fbcon-cfb8.h>
-+#include <video/fbcon-cfb16.h>
-+#include <video/fbcon-cfb24.h>
-+*/
-+
-+#include <linux/fb.h>
-+
-+static char *SMIRegs;		// point to virtual Memory Map IO starting address
-+static char *SMILFB;		// point to virtual video memory starting address
-+static struct par_info hw;	// used to record hardware information
-+
-+#include "smifb.h"
-+
-+struct ModeInit VGAMode[numVGAModes] =
-+{
-+	{
-+		/*  mode#0: 640 x 480  8Bpp  60Hz */
-+		640, 480, 8, 60,
-+		/*  Init_MISC */
-+		0xE3,
-+		{   /*  Init_SR0_SR4 */
-+			0x03, 0x01, 0x0F, 0x00, 0x0E,
-+		},
-+		{   /*  Init_SR10_SR24 */
-+			0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
-+			0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			0xC4, 0x30, 0x02, 0x01, 0x01,
-+		},
-+		{   /*  Init_SR30_SR75 */
-+			0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32,
-+			0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF,
-+			0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
-+			0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32,
-+			0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA,
-+			0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32,
-+			0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
-+			0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04,
-+			0x00, 0x45, 0x30, 0x30, 0x40, 0x30,
-+		},
-+		{   /*  Init_SR80_SR93 */
-+			0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32,
-+			0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32,
-+			0x00, 0x00, 0x00, 0x00,
-+		},
-+		{   /*  Init_SRA0_SRAF */
-+			0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
-+			0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF,
-+		},
-+		{   /*  Init_GR00_GR08 */
-+			0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
-+			0xFF,
-+		},
-+		{   /*  Init_AR00_AR14 */
-+			0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+			0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
-+			0x41, 0x00, 0x0F, 0x00, 0x00,
-+		},
-+		{   /*  Init_CR00_CR18 */
-+			0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E,
-+			0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3,
-+			0xFF,
-+		},
-+		{   /*  Init_CR30_CR4D */
-+			0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20,
-+			0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD,
-+			0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00,
-+			0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF,
-+		},
-+		{   /*  Init_CR90_CRA7 */
-+			0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55,
-+			0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00,
-+			0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00,
-+		},
-+	},
-+	{
-+		/*  mode#1: 640 x 480  16Bpp  60Hz */
-+		640, 480, 16, 60,
-+		/*  Init_MISC */
-+		0xE3,
-+		{   /*  Init_SR0_SR4 */
-+			0x03, 0x01, 0x0F, 0x00, 0x0E,
-+		},
-+		{   /*  Init_SR10_SR24 */
-+			0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
-+			0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			0xC4, 0x30, 0x02, 0x01, 0x01,
-+		},
-+		{   /*  Init_SR30_SR75 */
-+			0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32,
-+			0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF,
-+			0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
-+			0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32,
-+			0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA,
-+			0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32,
-+			0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
-+			0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04,
-+			0x00, 0x45, 0x30, 0x30, 0x40, 0x30,
-+		},
-+		{   /*  Init_SR80_SR93 */
-+			0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32,
-+			0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32,
-+			0x00, 0x00, 0x00, 0x00,
-+		},
-+		{   /*  Init_SRA0_SRAF */
-+			0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
-+			0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF,
-+		},
-+		{   /*  Init_GR00_GR08 */
-+			0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
-+			0xFF,
-+		},
-+		{   /*  Init_AR00_AR14 */
-+			0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+			0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
-+			0x41, 0x00, 0x0F, 0x00, 0x00,
-+		},
-+		{   /*  Init_CR00_CR18 */
-+			0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E,
-+			0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3,
-+			0xFF,
-+		},
-+		{   /*  Init_CR30_CR4D */
-+			0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20,
-+			0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD,
-+			0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00,
-+			0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF,
-+		},
-+		{   /*  Init_CR90_CRA7 */
-+			0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55,
-+			0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00,
-+			0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00,
-+		},
-+	},
-+	{
-+		/*  mode#2: 640 x 480  24Bpp  60Hz */
-+		640, 480, 24, 60,
-+		/*  Init_MISC */
-+		0xE3,
-+		{   /*  Init_SR0_SR4 */
-+			0x03, 0x01, 0x0F, 0x00, 0x0E,
-+		},
-+		{   /*  Init_SR10_SR24 */
-+			0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
-+			0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			0xC4, 0x30, 0x02, 0x01, 0x01,
-+		},
-+		{   /*  Init_SR30_SR75 */
-+			0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32,
-+			0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF,
-+			0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
-+			0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32,
-+			0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA,
-+			0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32,
-+			0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
-+			0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04,
-+			0x00, 0x45, 0x30, 0x30, 0x40, 0x30,
-+		},
-+		{   /*  Init_SR80_SR93 */
-+			0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32,
-+			0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32,
-+			0x00, 0x00, 0x00, 0x00,
-+		},
-+		{   /*  Init_SRA0_SRAF */
-+			0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
-+			0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF,
-+		},
-+		{   /*  Init_GR00_GR08 */
-+			0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
-+			0xFF,
-+		},
-+		{   /*  Init_AR00_AR14 */
-+			0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+			0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
-+			0x41, 0x00, 0x0F, 0x00, 0x00,
-+		},
-+		{   /*  Init_CR00_CR18 */
-+			0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E,
-+			0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3,
-+			0xFF,
-+		},
-+		{   /*  Init_CR30_CR4D */
-+			0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20,
-+			0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD,
-+			0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00,
-+			0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF,
-+		},
-+		{   /*  Init_CR90_CRA7 */
-+			0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55,
-+			0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00,
-+			0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00,
-+		},
-+	},
-+	{/*  mode#3: 800 x 600  8Bpp  60Hz */
-+		800,600,8,60,
-+		0x2B,	/*  Init_MISC */
-+		{       /*  Init_SR0_SR4 */
-+			0x03, 0x01, 0x0F, 0x03, 0x0E,
-+		},
-+		{   /*  Init_SR10_SR24 */
-+			0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
-+			0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			0xC4, 0x30, 0x02, 0x01, 0x01,
-+ 		},
-+		{   /*  Init_SR30_SR75 */
-+			0x24, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24,
-+			0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF,
-+			0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC,
-+			0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24,
-+			0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58,
-+			0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24,
-+			0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00,
-+			0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13,
-+			0x02, 0x45, 0x30, 0x35, 0x40, 0x20,
-+		},
-+		{   /*  Init_SR80_SR93 */
-+			0xFF, 0x87, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24,
-+			0x90, 0x01, 0x2C, 0x01, 0xFF, 0x00, 0x24, 0x24,
-+			0x00, 0x00, 0x00, 0x00,
-+		},
-+		{   /*  Init_SRA0_SRAF */
-+			0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
-+			0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF,
-+		},
-+		{   /*  Init_GR00_GR08 */
-+			0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
-+			0xFF,
-+		},
-+		{   /*  Init_AR00_AR14 */
-+			0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+			0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
-+			0x41, 0x00, 0x0F, 0x00, 0x00,
-+		},
-+		{   /*  Init_CR00_CR18 */
-+			0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0,
-+			0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3,
-+			0xFF,
-+ 		},
-+		{   /*  Init_CR30_CR4D */
-+			0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20,
-+			0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD,
-+			0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00,
-+			0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57,
-+		},
-+		{   /*  Init_CR90_CRA7 */
-+			0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA,
-+			0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00,
-+			0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00,
-+		},
-+	},
-+	{/*  mode#4: 800 x 600  16Bpp  60Hz */
-+		800, 600, 16, 60,
-+		/*  Init_MISC */
-+		0x2B,
-+		{   /*  Init_SR0_SR4 */
-+			0x03, 0x01, 0x0F, 0x03, 0x0E,
-+		},
-+		{   /*  Init_SR10_SR24 */
-+			0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
-+			0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			0xC4, 0x30, 0x02, 0x01, 0x01,
-+		},
-+		{   /*  Init_SR30_SR75 */
-+			0x24, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24,
-+			0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF,
-+			0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC,
-+			0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24,
-+			0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58,
-+			0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24,
-+			0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00,
-+			0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13,
-+			0x02, 0x45, 0x30, 0x35, 0x40, 0x20,
-+		},
-+		{   /*  Init_SR80_SR93 */
-+			0x00, 0x00, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24,
-+			0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x24, 0x24,
-+			0x00, 0x00, 0x00, 0x00,
-+		},
-+		{   /*  Init_SRA0_SRAF */
-+			0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
-+			0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF,
-+		},
-+		{   /*  Init_GR00_GR08 */
-+			0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
-+			0xFF,
-+		},
-+		{   /*  Init_AR00_AR14 */
-+			0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+			0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
-+			0x41, 0x00, 0x0F, 0x00, 0x00,
-+		},
-+		{   /*  Init_CR00_CR18 */
-+			0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0,
-+			0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3,
-+			0xFF,
-+ 		},
-+		{   /*  Init_CR30_CR4D */
-+			0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20,
-+			0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD,
-+			0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00,
-+			0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57,
-+		},
-+		{   /*  Init_CR90_CRA7 */
-+			0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA,
-+			0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00,
-+			0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00,
-+		},
-+	},
-+		{/*  mode#5: 800 x 600  24Bpp  60Hz */
-+		800,600,24,60,
-+		0x2B,
-+		{   /*  Init_SR0_SR4 */
-+			0x03, 0x01, 0x0F, 0x03, 0x0E,
-+		},
-+		{   /*  Init_SR10_SR24 */
-+			0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
-+			0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			0xC4, 0x30, 0x02, 0x01, 0x01,
-+		},
-+		{   /*  Init_SR30_SR75 */
-+			0x36, 0x03, 0x20, 0x09, 0xC0, 0x36, 0x36, 0x36,
-+			0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x03, 0xFF,
-+			0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
-+			0x20, 0x0C, 0x44, 0x20, 0x00, 0x36, 0x36, 0x36,
-+			0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58,
-+			0x04, 0x55, 0x59, 0x36, 0x36, 0x00, 0x00, 0x36,
-+			0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
-+			0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13,
-+			0x02, 0x45, 0x30, 0x30, 0x40, 0x20,
-+		},
-+		{   /*  Init_SR80_SR93 */
-+			0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x36,
-+			0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x36, 0x36,
-+			0x00, 0x00, 0x00, 0x00,
-+		},
-+		{   /*  Init_SRA0_SRAF */
-+			0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
-+			0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF,
-+		},
-+		{   /*  Init_GR00_GR08 */
-+			0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
-+			0xFF,
-+		},
-+		{   /*  Init_AR00_AR14 */
-+			0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-+			0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
-+			0x41, 0x00, 0x0F, 0x00, 0x00,
-+		},
-+		{   /*  Init_CR00_CR18 */
-+			0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0,
-+			0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+			0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3,
-+			0xFF,
-+		},
-+		{   /*  Init_CR30_CR4D */
-+			0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20,
-+			0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD,
-+			0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00,
-+			0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57,
-+		},
-+		{   /*  Init_CR90_CRA7 */
-+			0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA,
-+			0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00,
-+			0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00,
-+		},
-+	},
-+};
-+
-+static void smi_set_timing(struct smifb_info *sfb,struct par_info *hw)
-+{
-+	int i=0,j=0;
-+        u32 m_nScreenStride;
-+
-+
-+    for (j=0;j < numVGAModes;j++) {
-+		if (VGAMode[j].mmSizeX == hw->width &&
-+			VGAMode[j].mmSizeY == hw->height &&
-+			VGAMode[j].bpp == sfb->fb.var.bits_per_pixel &&
-+			VGAMode[j].hz == hw->hz)
-+		{
-+			
-+			smi_mmiowb(0x0,0x3c6);
-+
-+			smi_seqw(0,0x1);
-+
-+			smi_mmiowb(VGAMode[j].Init_MISC,0x3c2);
-+
-+			for (i=0;i<SIZE_SR00_SR04;i++)	// init SEQ register SR00 - SR04
-+			{
-+				smi_seqw(i,VGAMode[j].Init_SR00_SR04[i]);
-+			}
-+
-+			for (i=0;i<SIZE_SR10_SR24;i++)	// init SEQ register SR10 - SR24
-+			{
-+				smi_seqw(i+0x10,VGAMode[j].Init_SR10_SR24[i]);
-+			}
-+
-+			for (i=0;i<SIZE_SR30_SR75;i++)	// init SEQ register SR30 - SR75
-+			{
-+				if (((i+0x30) != 0x62) && ((i+0x30) != 0x6a) && ((i+0x30) != 0x6b))
-+					smi_seqw(i+0x30,VGAMode[j].Init_SR30_SR75[i]);
-+			}
-+			for (i=0;i<SIZE_SR80_SR93;i++)	// init SEQ register SR80 - SR93
-+			{
-+				smi_seqw(i+0x80,VGAMode[j].Init_SR80_SR93[i]);
-+			}
-+			for (i=0;i<SIZE_SRA0_SRAF;i++)	// init SEQ register SRA0 - SRAF
-+			{
-+				smi_seqw(i+0xa0,VGAMode[j].Init_SRA0_SRAF[i]);
-+			}
-+
-+			for (i=0;i<SIZE_GR00_GR08;i++)	// init Graphic register GR00 - GR08
-+			{
-+				smi_grphw(i,VGAMode[j].Init_GR00_GR08[i]);
-+			}
-+
-+			for (i=0;i<SIZE_AR00_AR14;i++)	// init Attribute register AR00 - AR14
-+			{
-+
-+				smi_attrw(i,VGAMode[j].Init_AR00_AR14[i]);
-+			}
-+
-+			for (i=0;i<SIZE_CR00_CR18;i++)	// init CRTC register CR00 - CR18
-+			{
-+				smi_crtcw(i,VGAMode[j].Init_CR00_CR18[i]);
-+			}
-+
-+			for (i=0;i<SIZE_CR30_CR4D;i++)	// init CRTC register CR30 - CR4D
-+			{
-+				smi_crtcw(i+0x30,VGAMode[j].Init_CR30_CR4D[i]);
-+			}
-+
-+			for (i=0;i<SIZE_CR90_CRA7;i++)	// init CRTC register CR90 - CRA7
-+			{
-+				smi_crtcw(i+0x90,VGAMode[j].Init_CR90_CRA7[i]);
-+			}
-+		}
-+	}
-+	smi_mmiowb(0x67,0x3c2);
-+	// set VPR registers
-+	writel(0x0,hw->m_pVPR+0x0C);
-+	writel(0x0,hw->m_pVPR+0x40);
-+	// set data width
-+	m_nScreenStride = (hw->width * sfb->fb.var.bits_per_pixel) / 64;
-+	switch (sfb->fb.var.bits_per_pixel)
-+	{
-+		case 8:
-+			writel(0x0,hw->m_pVPR+0x0);
-+			break;
-+		case 16:
-+			writel(0x00020000,hw->m_pVPR+0x0);
-+			break;
-+		case 24:
-+			writel(0x00040000,hw->m_pVPR+0x0);
-+			break;
-+	}
-+	writel((u32)(((m_nScreenStride + 2) << 16) | m_nScreenStride),hw->m_pVPR+0x10);
-+}
-+
-+/*
-+ * Set the color palette
-+ */
-+static int
-+smifb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
-+		   u_int trans, struct fb_info *info)
-+{
-+	
-+	struct smifb_info *sfb = (struct smifbinfo *)info;
-+	u32 *pal;
-+
-+	switch (sfb->fb.fix.visual) {
-+	case FB_VISUAL_TRUECOLOR:		/* RGB 5:6:5 True Colour */
-+		pal = sfb->fb.pseudo_palette;	// System has 16 default color
-+		if (regno >= 16)
-+			return 1;
-+
-+		pal[regno] = (red & 0xf800) |
-+		    ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11);
-+		break;
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ *  smifb_decode_var():
-+ *    Get the video params out of 'var'. If a value doesn't fit, round it up,
-+ *    if it's too big, return -EINVAL.
-+ *
-+ *    Suggestion: Round up in the following order: bits_per_pixel, xres,
-+ *    yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
-+ *    bitfields, horizontal timing, vertical timing.
-+ */
-+static int smifb_decode_var(struct fb_var_screeninfo *var, struct smifb_info *sfb, struct par_info *hw)
-+{
-+    hw->width = var->xres;
-+    hw->height = var->yres;
-+    hw->hz = 60;
-+
-+	return 0;
-+}
-+
-+static int smifb_set_par (struct fb_info *info)
-+{
-+	struct smifb_info *sfb = (struct smifb_info *)info;
-+	int err, chgvar = 0;
-+	struct fb_var_screeninfo *var = &info->var;
-+	struct fb_cmap *cmap;
-+
-+
-+	/*
-+	 * Decode var contents into a par structure, adjusting any
-+	 * out of range values.
-+	 */
-+	err = smifb_decode_var(var, sfb, &hw);
-+	if (err) {
-+		return err;
-+	}
-+
-+	if (hw.width != var->xres)
-+		chgvar = 1;
-+	if (hw.height != var->yres)
-+		chgvar = 1;
-+
-+	var->activate		&= ~FB_ACTIVATE_ALL;
-+
-+	smi_set_timing(sfb, &hw);
-+
-+	sfb->palette_size = var->bits_per_pixel == 8 ? 256 : 16;
-+	cmap = fb_default_cmap(sfb->palette_size);
-+	fb_set_cmap(cmap, &sfb->fb);
-+
-+	return 0;
-+}
-+
-+static int smifb_check_var (struct fb_var_screeninfo *var, struct fb_info *info)
-+{
-+	var->bits_per_pixel += 7;
-+	var->bits_per_pixel &= ~7;
-+
-+	var->xres_virtual =
-+	    var->xres_virtual < var->xres ? var->xres : var->xres_virtual;
-+	var->yres_virtual =
-+	    var->yres_virtual < var->yres ? var->yres : var->yres_virtual;
-+
-+	switch (var->bits_per_pixel) {
-+	case 8:
-+	case 16:		/* RGB 565 */
-+    case 24:
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	switch (var->bits_per_pixel) {
-+	case 16:
-+		var->red.offset	= 11;
-+		var->red.length	= 5;
-+		var->green.offset	= 5;
-+		var->green.length	= 6;
-+		var->blue.offset	= 0;
-+		var->blue.length	= 5;
-+
-+		info->fix.visual		= FB_VISUAL_TRUECOLOR;
-+		info->fix.line_length= var->xres * 2;
-+
-+		break;
-+	default:
-+		return -EINVAL; /* We don't support anything other than 16bpp for now. --NL */
-+		break;
-+	}
-+	return 0;
-+
-+//	smifb_set_color_bitfields(var);
-+
-+    return 0;
-+}
-+
-+/*
-+ * Formal definition of the VESA spec:
-+ *  On
-+ *  	This refers to the state of the display when it is in full operation
-+ *  Stand-By
-+ *  	This defines an optional operating state of minimal power reduction with
-+ *  	the shortest recovery time
-+ *  Suspend
-+ *  	This refers to a level of power management in which substantial power
-+ *  	reduction is achieved by the display.  The display can have a longer
-+ *  	recovery time from this state than from the Stand-by state
-+ *  Off
-+ *  	This indicates that the display is consuming the lowest level of power
-+ *  	and is non-operational. Recovery from this state may optionally require
-+ *  	the user to manually power on the monitor
-+ *
-+ *  Now, the fbdev driver adds an additional state, (blank), where they
-+ *  turn off the video (maybe by colormap tricks), but don't mess with the
-+ *  video itself: think of it semantically between on and Stand-By.
-+ *
-+ *  So here's what we should do in our fbdev blank routine:
-+ *
-+ *  	VESA_NO_BLANKING (mode 0)	Video on,  front/back light on
-+ *  	VESA_VSYNC_SUSPEND (mode 1)  	Video on,  front/back light off
-+ *  	VESA_HSYNC_SUSPEND (mode 2)  	Video on,  front/back light off
-+ *  	VESA_POWERDOWN (mode 3)		Video off, front/back light off
-+ *
-+ *  This will match the matrox implementation.
-+ */
-+/*
-+ * smifb_blank():
-+ *	Blank the display by setting all palette values to zero.  Note, the
-+ * 	12 and 16 bpp modes don't really use the palette, so this will not
-+ *      blank the display in all modes.
-+ */
-+static int smifb_blank(int blank, struct fb_info *info)
-+{
-+//	struct smifb_info *sfb = (struct smifb_info *)info;
-+#if 0
-+	switch (blank) {
-+	case VESA_POWERDOWN:
-+	case VESA_VSYNC_SUSPEND:
-+	case VESA_HSYNC_SUSPEND:
-+	case VESA_NO_BLANKING:
-+	}
-+#endif
-+	return 1;
-+}
-+
-+static struct fb_ops smifb_ops = {
-+	.owner		= THIS_MODULE,
-+	.fb_check_var	= smifb_check_var,
-+	.fb_set_par 	= smifb_set_par,
-+	.fb_setcolreg	= smifb_setcolreg,
-+	.fb_blank	= smifb_blank,
-+	
-+	/* Accelerated functions, using softversions, per se */
-+	.fb_fillrect	= cfb_fillrect,
-+	.fb_copyarea	= cfb_copyarea,
-+	.fb_imageblit	= cfb_imageblit,
-+	.fb_cursor	= soft_cursor,
-+};
-+
-+/*
-+ * Alloc struct smifb_info and assign the default value
-+ */
-+static struct smifb_info * __devinit
-+smi_alloc_fb_info(struct pci_dev *dev, char *name)
-+{
-+    struct smifb_info *sfb;
-+
-+    sfb = kmalloc(sizeof(struct smifb_info) + sizeof(u32) * 16, GFP_KERNEL);
-+
-+    if (!sfb)
-+        return NULL;
-+
-+    memset(sfb, 0, sizeof(struct smifb_info));
-+
-+    sfb->currcon        = -1;
-+    sfb->dev            = dev;
-+
-+    strcpy(sfb->fb.fix.id, name);
-+
-+    sfb->fb.fix.type		= FB_TYPE_PACKED_PIXELS;
-+    sfb->fb.fix.type_aux	= 0;
-+    sfb->fb.fix.xpanstep	= 0;
-+    sfb->fb.fix.ypanstep	= 0;
-+    sfb->fb.fix.ywrapstep	= 0;
-+    sfb->fb.fix.accel		= FB_ACCEL_NONE;
-+
-+    sfb->fb.var.nonstd		= 0;
-+    sfb->fb.var.activate	= FB_ACTIVATE_NOW;
-+    sfb->fb.var.height		= -1;
-+    sfb->fb.var.width		= -1;
-+    sfb->fb.var.accel_flags	= 0;
-+    sfb->fb.var.vmode		= FB_VMODE_NONINTERLACED;
-+
-+    sfb->fb.fbops		= &smifb_ops;
-+    sfb->fb.flags		= FBINFO_FLAG_DEFAULT;
-+    sfb->fb.node		= -1;
-+    sfb->fb.pseudo_palette	= (void *)(&sfb->palette_size + 1);
-+
-+    return sfb;
-+}
-+
-+/*
-+ * Unmap in the memory mapped IO registers
-+ *
-+ */
-+
-+static void __devinit
-+smi_unmap_mmio(struct smifb_info *sfb)
-+{
-+    if (sfb && SMILFB)
-+    {
-+        iounmap(SMILFB);
-+        SMIRegs = NULL;
-+    }
-+}
-+
-+/*
-+ * Map in the screen memory
-+ *
-+ */
-+static int __devinit
-+smi_map_smem(struct smifb_info *sfb, struct pci_dev *dev, u_long smem_len)
-+{
-+
-+    sfb->fb.fix.smem_start = pci_resource_start(dev, 0);
-+    sfb->fb.fix.smem_len  = smem_len;
-+    printk("%s:smem %x,len %x\n",sfb->fb.fix.smem_start,sfb->fb.fix.smem_len);
-+    sfb->fb.screen_base = SMILFB;
-+
-+    if (!sfb->fb.screen_base)
-+    {
-+        printk("%s: unable to map screen memory\n",sfb->fb.fix.id);
-+        return -ENOMEM;
-+    }
-+
-+    return 0;
-+}
-+
-+
-+/*
-+ * Unmap in the screen memory
-+ *
-+ */
-+static void __devinit
-+smi_unmap_smem(struct smifb_info *sfb)
-+{
-+    if (sfb && sfb->fb.screen_base)
-+    {
-+        iounmap(sfb->fb.screen_base);
-+        sfb->fb.screen_base = NULL;
-+    }
-+}
-+
-+/*
-+ * We need to wake up the LynxEM+, and make sure its in linear memory mode.
-+ */
-+static inline void __devinit
-+smi_init_hw(void)
-+{
-+	/* The delays prevent the ColdFire PCI host from locking up. :/ --NL */
-+	udelay(1000);
-+    outb(0x18, 0x3c4);
-+	udelay(1000);
-+    outb(0x11, 0x3c5);
-+	udelay(1000);
-+	printk("%s: 0x3c4 =%x 0x3c5 %x\n",__FUNCTION__,inw(0x3c4),inw(0x3c5));
-+}
-+
-+static void __devinit
-+smi_free_fb_info(struct smifb_info *sfb)
-+{
-+	if (sfb) {
-+		fb_alloc_cmap(&sfb->fb.cmap, 0, 0);
-+		kfree(sfb);
-+	}
-+}
-+
-+
-+u16 SMI_ChipIDs[numChipIDs] = {0x710, 0x712, 0x720};
-+
-+int __init smifb_init(struct pci_dev *pdev, const struct pci_device_id *ent)
-+{
-+    struct smifb_info *sfb;
-+    u_long smem_size;
-+    char name[16];
-+    int err;
-+	char *m_pLAW;
-+	ulong m_pLAWPhysical;
-+
-+    printk("%s start\n",__FUNCTION__);
-+    sprintf(name, "smifb");
-+
-+    hw.chipID = pdev->device;
-+    
-+    err = -ENOMEM;
-+    sfb = smi_alloc_fb_info(pdev, name);
-+    if (!sfb) {
-+        goto failed;
-+    }
-+
-+    smi_init_hw();
-+
-+	// Map address and memory detection
-+	m_pLAWPhysical = pci_resource_start(pdev,0);
-+	printk("%s:m_pLAWPhysical %x,hw.chipID %x\n",__FUNCTION__,m_pLAWPhysical,hw.chipID);
-+	switch (hw.chipID) {
-+		case 0x710:
-+		case 0x712:
-+			sfb->fb.fix.mmio_start = m_pLAWPhysical + 0x00700000;
-+			sfb->fb.fix.mmio_len   = 0x00100000;
-+
-+    		hw.m_pLFB = SMILFB = ioremap(m_pLAWPhysical, 0x00800000);
-+		printk("%s:SMILFB%x\n",__FUNCTION__,SMILFB);
-+    		hw.m_pMMIO = SMIRegs = SMILFB + 0x00700000;
-+			hw.m_pDPR = hw.m_pLFB + 0x00408000;
-+			hw.m_pVPR = hw.m_pLFB + 0x0040c000;
-+
-+    		if (!SMIRegs)
-+    		{
-+        		printk("%s: unable to map memory mapped IO\n",sfb->fb.fix.id);
-+        		return -ENOMEM;
-+    		}
-+
-+			smi_seqw(0x62,0x7A);
-+    		smi_seqw(0x6a,0x0c);
-+    		smi_seqw(0x6b,0x02);
-+    		smem_size = 0x00400000;
-+
-+    		//LynxEM+ memory dection
-+    		*(u32 *)(SMILFB + 4) = 0xAA551133;
-+    		if (*(u32 *)(SMILFB + 4) != 0xAA551133)
-+    		{
-+    			smem_size = 0x00200000;
-+        		// Program the MCLK to 130 MHz
-+        		smi_seqw(0x6a,0x12);
-+        		smi_seqw(0x6b,0x02);
-+        		smi_seqw(0x62,0x3e);
-+     		}
-+			break;
-+		case 0x720:
-+			sfb->fb.fix.mmio_start = m_pLAWPhysical + 0x000c0000;
-+			sfb->fb.fix.mmio_len   = 0x00040000;
-+
-+			m_pLAW = ioremap(m_pLAWPhysical, 0x00a00000);
-+			hw.m_pLFB = SMILFB = m_pLAW + 0x00200000;
-+			hw.m_pMMIO = SMIRegs = m_pLAW + 0x000c0000;
-+			hw.m_pDPR = m_pLAW;
-+			hw.m_pVPR = m_pLAW + 0x800;
-+
-+			smi_seqw(0x62,0xff);
-+			smi_seqw(0x6a,0x0d);
-+			smi_seqw(0x6b,0x02);
-+			smem_size = 0x00400000;
-+
-+			break;
-+	}
-+
-+	sfb->fb.var.xres = 640;
-+	sfb->fb.var.yres = 480;
-+	sfb->fb.var.bits_per_pixel = 16;
-+
-+   	sfb->fb.var.xres_virtual = sfb->fb.var.xres;
-+
-+	sfb->fb.var.yres_virtual = sfb->fb.var.yres;
-+	
-+	sfb->fb.flags = FBINFO_FLAG_DEFAULT;
-+
-+	printk("%s:smem_size %x\n",__FUNCTION__,smem_size);
-+    err = smi_map_smem(sfb, pdev, smem_size);
-+	printk("%s:smi_map_smem error %x\n",__FUNCTION__,err);
-+    if (err) {
-+		goto failed;
-+    }
-+
-+
-+
-+	fb_set_var(&sfb->fb, &sfb->fb.var);
-+	smifb_check_var(&sfb->fb.var, &sfb->fb);
-+	smifb_set_par(sfb);
-+	printk("%s:register_framebuffer \n",__FUNCTION__);
-+	err = register_framebuffer(&sfb->fb);
-+	if (err < 0) {
-+		goto failed;
-+    }
-+
-+	printk("Silicon Motion, Inc. LynxEM+ Init complete.\n");
-+
-+	return 0;
-+
-+failed:
-+	smi_unmap_smem(sfb);
-+	smi_unmap_mmio(sfb);
-+	smi_free_fb_info(sfb);
-+	printk("Silicon Motion, Inc. LynxEM+ Init FAILED.n");
-+
-+	return err;
-+}
-+
-+struct pci_device_id smifb_pci_tbl[] = {
-+        { 0x126f, 0x710, PCI_ANY_ID, PCI_ANY_ID },
-+        { 0x126f, 0x712, PCI_ANY_ID, PCI_ANY_ID },
-+        { 0x126f, 0x720, PCI_ANY_ID, PCI_ANY_ID },
-+        { 0 }
-+};
-+
-+MODULE_DEVICE_TABLE(pci, smifb_pci_tbl);
-+
-+struct pci_driver smifb_driver = {
-+        .name =         "smifb",
-+        .id_table =     smifb_pci_tbl,
-+        .probe =        smifb_init,
-+};
-+
-+int __init smi_init(void)
-+{
-+	/*return pci_module_init(&smifb_driver);*/
-+	return pci_register_driver(&smifb_driver);
-+}
-+
-+module_init(smi_init);
-+MODULE_LICENSE("GPL");
-+
-+
-+
---- /dev/null
-+++ b/drivers/video/smifb.h
-@@ -0,0 +1,149 @@
-+/***************************************************************************
-+			smifb.h  -  SiliconMotion LynxEM+ frame buffer device
-+                             -------------------
-+    begin                : Thu Aug 9 2001
-+    copyright            : (C) 2001 by Szu-Tao Huang
-+    email                : johuang@siliconmotion.com
-+ ***************************************************************************/
-+
-+/***************************************************************************
-+ *                                                                         *
-+ *   This program is free software; you can redistribute it and/or modify  *
-+ *   it under the terms of the GNU General Public License as published by  *
-+ *   the Free Software Foundation; either version 2 of the License, or     *
-+ *   (at your option) any later version.                                   *
-+ *                                                                         *
-+ ***************************************************************************/
-+
-+#define smi_mmiowb(dat,reg)	writeb(dat, SMIRegs + reg)
-+#define smi_mmioww(dat,reg)	writew(dat, SMIRegs + reg)
-+#define smi_mmiowl(dat,reg)	writel(dat, SMIRegs + reg)
-+
-+#define smi_mmiorb(reg)	        readb(SMIRegs + reg)
-+#define smi_mmiorw(reg)	        readw(SMIRegs + reg)
-+#define smi_mmiorl(reg)	        readl(SMIRegs + reg)
-+
-+#define SIZE_SR00_SR04      (0x04 - 0x00 + 1)
-+#define SIZE_SR10_SR24      (0x24 - 0x10 + 1)
-+#define SIZE_SR30_SR75      (0x75 - 0x30 + 1)
-+#define SIZE_SR80_SR93      (0x93 - 0x80 + 1)
-+#define SIZE_SRA0_SRAF      (0xAF - 0xA0 + 1)
-+#define SIZE_GR00_GR08      (0x08 - 0x00 + 1)
-+#define SIZE_AR00_AR14      (0x14 - 0x00 + 1)
-+#define SIZE_CR00_CR18      (0x18 - 0x00 + 1)
-+#define SIZE_CR30_CR4D      (0x4D - 0x30 + 1)
-+#define SIZE_CR90_CRA7      (0xA7 - 0x90 + 1)
-+#define SIZE_VPR                        (0x6C + 1)
-+#define SIZE_DPR			(0x44 + 1)
-+
-+#define numVGAModes			6
-+#define numChipIDs			3
-+
-+#define NR_PALETTE	256
-+#define NR_RGB          2
-+
-+/*
-+ * Minimum X and Y resolutions
-+ */
-+#define MIN_XRES	640
-+#define MIN_YRES	480
-+
-+static inline void smi_crtcw(int reg, int val)
-+{
-+        smi_mmiowb(reg, 0x3d4);
-+        smi_mmiowb(val, 0x3d5);
-+}
-+
-+static inline unsigned int smi_crtcr(int reg)
-+{
-+        smi_mmiowb(reg, 0x3d4);
-+        return smi_mmiorb(0x3d5);
-+}
-+
-+static inline void smi_grphw(int reg, int val)
-+{
-+        smi_mmiowb(reg, 0x3ce);
-+        smi_mmiowb(val, 0x3cf);
-+}
-+
-+static inline unsigned int smi_grphr(int reg)
-+{
-+        smi_mmiowb(reg, 0x3ce);
-+        return smi_mmiorb(0x3cf);
-+}
-+
-+static inline void smi_attrw(int reg, int val)
-+{
-+        smi_mmiorb(0x3da);
-+        smi_mmiowb(reg, 0x3c0);
-+        smi_mmiorb(0x3c1);
-+        smi_mmiowb(val, 0x3c0);
-+}
-+
-+static inline void smi_seqw(int reg, int val)
-+{
-+        smi_mmiowb(reg, 0x3c4);
-+        smi_mmiowb(val, 0x3c5);
-+}
-+
-+static inline unsigned int smi_seqr(int reg)
-+{
-+        smi_mmiowb(reg, 0x3c4);
-+        return smi_mmiorb(0x3c5);
-+}
-+/*
-+* Private structure
-+*/
-+struct smifb_info {
-+        /*
-+        * The following is a pointer to be passed into the
-+        * functions below.  The modules outside the main
-+        * smifb.c driver have no knowledge as to what
-+        * is within this structure.
-+        */
-+        struct fb_info          fb;
-+        struct display_switch   *dispsw;
-+        struct pci_dev	        *dev;
-+        signed int              currcon;
-+
-+        struct {
-+                u8 red, green, blue;
-+        } palette[NR_RGB];
-+
-+        u_int                   palette_size;
-+};
-+
-+struct par_info {
-+	/*
-+	 * Hardware
-+	 */
-+	u16		chipID;
-+	char	*m_pLFB;
-+	char	*m_pMMIO;
-+	char	*m_pDPR;
-+	char	*m_pVPR;
-+
-+	u_int	width;
-+	u_int	height;
-+	u_int	hz;
-+};
-+
-+// The next structure holds all information relevant for a specific video mode.
-+struct ModeInit
-+{
-+	int			  mmSizeX;
-+	int			  mmSizeY;
-+	int			  bpp;
-+	int			  hz;
-+	unsigned char Init_MISC;
-+	unsigned char Init_SR00_SR04[SIZE_SR00_SR04];
-+	unsigned char Init_SR10_SR24[SIZE_SR10_SR24];
-+	unsigned char Init_SR30_SR75[SIZE_SR30_SR75];
-+	unsigned char Init_SR80_SR93[SIZE_SR80_SR93];
-+	unsigned char Init_SRA0_SRAF[SIZE_SRA0_SRAF];
-+	unsigned char Init_GR00_GR08[SIZE_GR00_GR08];
-+	unsigned char Init_AR00_AR14[SIZE_AR00_AR14];
-+	unsigned char Init_CR00_CR18[SIZE_CR00_CR18];
-+	unsigned char Init_CR30_CR4D[SIZE_CR30_CR4D];
-+	unsigned char Init_CR90_CRA7[SIZE_CR90_CRA7];
-+};
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -672,6 +672,15 @@ config TXX9_WDT
- 
- # PARISC Architecture
- 
-+# ColdFire Architecture
-+
-+config COLDFIRE_WATCHDOG
-+	tristate "ColdFire watchdog support"
-+	depends on WATCHDOG
-+	help
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called softdog.
-+
- # POWERPC Architecture
- 
- config MPC5200_WDT
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -86,6 +86,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
- # M32R Architecture
- 
- # M68K Architecture
-+obj-$(CONFIG_COLDFIRE_WATCHDOG) += mcf_wdt.o
- 
- # M68KNOMMU Architecture
- 
---- /dev/null
-+++ b/drivers/watchdog/mcf_wdt.c
-@@ -0,0 +1,220 @@
-+/*
-+ * drivers/watchdog/mcf_wdt.c
-+ *
-+ * Watchdog driver for ColdFire processors
-+ *
-+ * Adapted from the IXP4xx watchdog driver.
-+ * The original version carries these notices:
-+ *
-+ * Author: Deepak Saxena <dsaxena@plexity.net>
-+ *
-+ * Copyright 2004 (c) MontaVista, Software, Inc.
-+ * Based on sa1100 driver, Copyright (C) 2000 Oleg Drokin <green@crimea.edu>
-+ *
-+ * This file is licensed under  the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/fs.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/init.h>
-+#include <linux/bitops.h>
-+
-+#include <asm-m68k/uaccess.h>
-+#include <asm-m68k/coldfire.h>
-+#include <asm-m68k/m5485gpt.h>
-+
-+static int nowayout;
-+static unsigned int heartbeat = 30;	/* (secs) Default is 0.5 minute */
-+static unsigned long wdt_status;
-+
-+#define	WDT_IN_USE		0
-+#define	WDT_OK_TO_CLOSE		1
-+
-+static unsigned long wdt_tick_rate;
-+
-+static void
-+wdt_enable(void)
-+{
-+	MCF_GPT_GMS0 = 0;
-+	MCF_GPT_GCIR0 =  MCF_GPT_GCIR_PRE(heartbeat*wdt_tick_rate) |
-+				MCF_GPT_GCIR_CNT(0xffff);
-+	MCF_GPT_GMS0 = MCF_GPT_GMS_OCPW(0xA5) | MCF_GPT_GMS_WDEN |
-+				MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS_GPIO;
-+}
-+
-+static void
-+wdt_disable(void)
-+{
-+	MCF_GPT_GMS0 = 0;
-+}
-+
-+static void
-+wdt_keepalive(void)
-+{
-+	MCF_GPT_GMS0 = MCF_GPT_GMS_OCPW(0xA5) | MCF_GPT_GMS0;
-+}
-+
-+static int
-+mcf_wdt_open(struct inode *inode, struct file *file)
-+{
-+	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
-+		return -EBUSY;
-+
-+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-+
-+	wdt_enable();
-+
-+	return nonseekable_open(inode, file);
-+}
-+
-+static ssize_t
-+mcf_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
-+{
-+	if (len) {
-+		if (!nowayout) {
-+			size_t i;
-+
-+			clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-+
-+			for (i = 0; i != len; i++) {
-+				char c;
-+
-+				if (get_user(c, data + i))
-+					return -EFAULT;
-+				if (c == 'V')
-+					set_bit(WDT_OK_TO_CLOSE, &wdt_status);
-+			}
-+		}
-+		wdt_keepalive();
-+	}
-+
-+	return len;
-+}
-+
-+
-+static struct watchdog_info ident = {
-+	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
-+				WDIOF_KEEPALIVEPING,
-+	.identity	= "Coldfire Watchdog",
-+};
-+
-+static int
-+mcf_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-+			unsigned long arg)
-+{
-+	int ret = -ENOIOCTLCMD;
-+	int time;
-+
-+	switch (cmd) {
-+	case WDIOC_GETSUPPORT:
-+		ret = copy_to_user((struct watchdog_info *)arg, &ident,
-+				   sizeof(ident)) ? -EFAULT : 0;
-+		break;
-+
-+	case WDIOC_GETSTATUS:
-+		ret = put_user(0, (int *)arg);
-+		break;
-+
-+	case WDIOC_GETBOOTSTATUS:
-+		ret = put_user(0, (int *)arg);
-+		break;
-+
-+	case WDIOC_SETTIMEOUT:
-+		ret = get_user(time, (int *)arg);
-+		if (ret)
-+			break;
-+
-+		if (time <= 0 || time > 30) {
-+			ret = -EINVAL;
-+			break;
-+		}
-+
-+		heartbeat = time;
-+		wdt_enable();
-+		/* Fall through */
-+
-+	case WDIOC_GETTIMEOUT:
-+		ret = put_user(heartbeat, (int *)arg);
-+		break;
-+
-+	case WDIOC_KEEPALIVE:
-+		wdt_keepalive();
-+		ret = 0;
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
-+static int
-+mcf_wdt_release(struct inode *inode, struct file *file)
-+{
-+	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
-+		wdt_disable();
-+	} else {
-+		printk(KERN_CRIT "WATCHDOG: Device closed unexpectdly - "
-+					"timer will not stop\n");
-+	}
-+
-+	clear_bit(WDT_IN_USE, &wdt_status);
-+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-+
-+	return 0;
-+}
-+
-+
-+static struct file_operations mcf_wdt_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.write		= mcf_wdt_write,
-+	.ioctl		= mcf_wdt_ioctl,
-+	.open		= mcf_wdt_open,
-+	.release	= mcf_wdt_release,
-+};
-+
-+static struct miscdevice mcf_wdt_miscdev = {
-+	.minor		= WATCHDOG_MINOR,
-+	.name		= "watchdog",
-+	.fops		= &mcf_wdt_fops,
-+};
-+
-+static int __init mcf_wdt_init(void)
-+{
-+	wdt_tick_rate = MCF_BUSCLK/0xffff;
-+#ifdef CONFIG_WATCHDOG_NOWAYOUT
-+	nowayout = 1;
-+#else
-+	nowayout = 0;
-+#endif
-+	printk("ColdFire watchdog driver is loaded.\n");
-+
-+	return misc_register(&mcf_wdt_miscdev);
-+}
-+
-+static void __exit mcf_wdt_exit(void)
-+{
-+	misc_deregister(&mcf_wdt_miscdev);
-+}
-+
-+module_init(mcf_wdt_init);
-+module_exit(mcf_wdt_exit);
-+
-+MODULE_AUTHOR("Deepak Saxena");
-+MODULE_DESCRIPTION("ColdFire Watchdog");
-+
-+module_param(heartbeat, int, 0);
-+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 60s)");
-+
-+module_param(nowayout, int, 0);
-+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
-+
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+
---- a/fs/namespace.c
-+++ b/fs/namespace.c
-@@ -1364,7 +1364,11 @@ int copy_mount_options(const void __user
- 	/* copy_from_user cannot cross TASK_SIZE ! */
- 	size = TASK_SIZE - (unsigned long)data;
- 	if (size > PAGE_SIZE)
-+#ifndef CONFIG_COLDFIRE
- 		size = PAGE_SIZE;
-+#else
-+		size = PAGE_SIZE - ((unsigned long)data & ~PAGE_MASK);
-+#endif
- 
- 	i = size - exact_copy_from_user((void *)page, data, size);
- 	if (!i) {
---- /dev/null
-+++ b/include/asm-m68k/5445x_pci.h
-@@ -0,0 +1,94 @@
-+/*
-+ * asm-m68k/pci.h - m68k specific PCI declarations.
-+ *
-+ * Coldfire Implementation Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *	Kurt Mahan <kmahan@freescale.com>
-+ */
-+#ifndef _ASM_M68K_5445X_PCI_H
-+#define _ASM_M68K_5445x_PCI_H
-+
-+#ifndef CONFIG_PCI
-+/*
-+ * The PCI address space does equal the physical memory
-+ * address space.  The networking and block device layers use
-+ * this boolean for bounce buffer decisions.
-+ */
-+#define PCI_DMA_BUS_IS_PHYS		(1)
-+#else
-+#include <asm-generic/pci-dma-compat.h>
-+
-+/*
-+ * The PCI address space does equal the physical memory
-+ * address space.  The networking and block device layers use
-+ * this boolean for bounce buffer decisions.
-+ */
-+#define PCI_DMA_BUS_IS_PHYS		(1)
-+
-+#define PCIBIOS_MIN_IO			0x00004000
-+#define PCIBIOS_MIN_MEM			0x02000000
-+
-+#define pcibios_assign_all_busses()	0
-+#define pcibios_scan_all_fns(a, b)	0
-+
-+static inline void
-+pcibios_set_master(struct pci_dev *dev)
-+{
-+	/* no special bus mastering setup handling */
-+}
-+
-+static inline void
-+pcibios_penalize_isa_irq(int irq, int active)
-+{
-+	/* no dynamic PCI IRQ allocation */
-+}
-+
-+#if 0
-+static inline void
-+pcibios_add_platform_entries(struct pci_dev *dev)
-+{
-+	/* no special handling */
-+}
-+#endif
-+
-+static inline void
-+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-+			 struct resource *res)
-+{
-+#ifdef CONFIG_M54455
-+	if ((res->start == 0xa0000000) || (res->start == 0xa8000000)) {
-+		/* HACK!  FIX! kludge to fix bridge mapping */
-+		region->start = res->start & 0x0fffffff;
-+		region->end = res->end & 0x0fffffff;
-+	} else {
-+		region->start = res->start;
-+		region->end = res->end;
-+	}
-+#else
-+	region->start = res->start;
-+	region->end = res->end;
-+#endif
-+}
-+
-+static inline void
-+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-+			struct pci_bus_region *region)
-+{
-+	res->start = region->start;
-+	res->end = region->end;
-+}
-+
-+static inline struct resource *
-+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-+{
-+	struct resource *root = NULL;
-+
-+	if (res->flags & IORESOURCE_IO)
-+		root = &ioport_resource;
-+	if (res->flags & IORESOURCE_MEM)
-+		root = &iomem_resource;
-+
-+	return root;
-+}
-+
-+#endif /* CONFIG_PCI */
-+#endif /* _ASM_M68K_5445X_PCI_H */
---- /dev/null
-+++ b/include/asm-m68k/548x_pci.h
-@@ -0,0 +1,99 @@
-+#ifndef _ASM_M68K_548X_PCI_H
-+#define _ASM_M68K_548X_PCI_H
-+
-+/*
-+ * asm-m68k/pci_m68k.h - m68k specific PCI declarations.
-+ *
-+ * Written by Wout Klaren.
-+ */
-+#include <linux/mm.h>
-+#include <asm/scatterlist.h>
-+
-+#include <asm-generic/pci.h>
-+
-+struct pci_ops;
-+
-+/*
-+ * Structure with hardware dependent information and functions of the
-+ * PCI bus.
-+ */
-+
-+struct pci_bus_info
-+{
-+	/*
-+	 * Resources of the PCI bus.
-+	 */
-+
-+	struct resource mem_space;
-+	struct resource io_space;
-+
-+	/*
-+	 * System dependent functions.
-+	 */
-+
-+	struct pci_ops *m68k_pci_ops;
-+
-+	void (*fixup)(int pci_modify);
-+	void (*conf_device)(struct pci_dev *dev);
-+};
-+
-+#define pcibios_assign_all_busses()	0
-+#define pcibios_scan_all_fns(a, b)	0
-+
-+static inline void pcibios_set_master(struct pci_dev *dev)
-+{
-+	/* No special bus mastering setup handling */
-+}
-+
-+static inline void pcibios_penalize_isa_irq(int irq)
-+{
-+	/* We don't do dynamic PCI IRQ allocation */
-+}
-+
-+#ifndef CONFIG_COLDFIRE
-+/* The PCI address space does equal the physical memory
-+ * address space.  The networking and block device layers use
-+ * this boolean for bounce buffer decisions.
-+ */
-+#define PCI_DMA_BUS_IS_PHYS	(1)
-+
-+#define PCIBIOS_MIN_IO 		0x00004000
-+#define PCIBIOS_MIN_MEM 	0x04000000
-+
-+#else /* !CONFIG_COLDFIRE */
-+#include <asm-generic/pci-dma-compat.h>
-+#define PCI_DMA_BASE 		/*0x40000000*/0	/* PCI-DMA window base 		*/
-+
-+extern struct pci_bus_info *__init init_coldfire_pci(void);
-+extern void * pci_alloc_son(struct pci_dev *, size_t,
-+                            dma_addr_t *, int);
-+/*
-+ * The PCI address space equal the virtual memory
-+ * address space on m547X/m548X.
-+ */
-+#define PCI_DMA_BUS_IS_PHYS	(1)
-+
-+#define PCIBIOS_MIN_IO 		0x00000100
-+#define PCIBIOS_MIN_MEM 	0x02000000
-+
-+struct scatterlist;
-+
-+
-+/* This is always fine. */
-+#define pci_dac_dma_supported(pci_dev, mask)	(1)
-+
-+
-+/* These macros should be used after a pci_map_sg call has been done
-+ * to get bus addresses of each of the SG entries and their lengths.
-+ * You should only work with the number of sg entries pci_map_sg
-+ * returns.
-+ */
-+#define sg_dma_address(sg)	((sg)->dma_address)
-+#define sg_dma_len(sg)		((sg)->length)
-+
-+static inline void pcibios_align_resource(void *data, struct resource *res, unsigned long size, unsigned long align)
-+{
-+}
-+
-+#endif /* !CONFIG_COLDFIRE*/
-+#endif /* _ASM_M68K_548X_PCI_H */
---- a/include/asm-m68k/atomic.h
-+++ b/include/asm-m68k/atomic.h
-@@ -2,7 +2,7 @@
- #define __ARCH_M68K_ATOMIC__
- 
- 
--#include <asm/system.h>
-+#include <asm/system.h>	/* local_irq_XXX() */
- 
- /*
-  * Atomic operations that C can't guarantee us.  Useful for
-@@ -21,12 +21,20 @@ typedef struct { int counter; } atomic_t
- 
- static inline void atomic_add(int i, atomic_t *v)
- {
-+#ifndef CONFIG_COLDFIRE
- 	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : "id" (i));
-+#else
-+	__asm__ __volatile__("addl %1,%0" : "=m" (*v) : "d" (i), "m" (*v));
-+#endif
- }
- 
- static inline void atomic_sub(int i, atomic_t *v)
- {
-+#ifndef CONFIG_COLDFIRE
- 	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : "id" (i));
-+#else
-+	__asm__ __volatile__("subl %1,%0" : "=m" (*v) : "d" (i), "m" (*v));
-+#endif
- }
- 
- static inline void atomic_inc(atomic_t *v)
-@@ -46,6 +54,14 @@ static inline int atomic_dec_and_test(at
- 	return c != 0;
- }
- 
-+static __inline__ int atomic_dec_and_test_lt(volatile atomic_t *v)
-+{
-+	char c;
-+	__asm__ __volatile__("subql #1,%1; slt %0" : "=d" (c), "=m" (*v)
-+			     : "m" (*v));
-+	return c != 0 ;
-+}
-+
- static inline int atomic_inc_and_test(atomic_t *v)
- {
- 	char c;
-@@ -156,7 +172,12 @@ static inline int atomic_sub_and_test(in
- static inline int atomic_add_negative(int i, atomic_t *v)
- {
- 	char c;
-+#ifndef CONFIG_COLDFIRE
- 	__asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "+m" (*v): "g" (i));
-+#else
-+	 __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "=m" (*v)
-+			      : "d" (i) , "m" (*v));
-+#endif
- 	return c != 0;
- }
- 
---- a/include/asm-m68k/auxvec.h
-+++ b/include/asm-m68k/auxvec.h
-@@ -1,4 +1,13 @@
- #ifndef __ASMm68k_AUXVEC_H
- #define __ASMm68k_AUXVEC_H
-+/*
-+ * Architecture-neutral AT_ values in 0-17, leave some room
-+ * for more of them.
-+ */
-+
-+#ifdef CONFIG_VSYSCALL
-+/* Entry point to the vsyscall page */
-+#define	AT_SYSINFO_EHDR		33
-+#endif
- 
- #endif
---- a/include/asm-m68k/bitops.h
-+++ b/include/asm-m68k/bitops.h
-@@ -19,6 +19,7 @@
-  *
-  * They use the standard big-endian m680x0 bit ordering.
-  */
-+#ifndef CONFIG_COLDFIRE
- 
- #define test_and_set_bit(nr,vaddr) \
-   (__builtin_constant_p(nr) ? \
-@@ -457,4 +458,503 @@ static inline int ext2_find_next_bit(con
- 
- #endif /* __KERNEL__ */
- 
-+#else /* CONFIG_COLDFIRE */
-+
-+#define test_and_set_bit(nr,vaddr)			\
-+  (__builtin_constant_p(nr) ?				\
-+   __constant_coldfire_test_and_set_bit(nr, vaddr) :	\
-+   __generic_coldfire_test_and_set_bit(nr, vaddr))
-+
-+#if 0
-+static __inline__ int __constant_coldfire_test_and_set_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	char retval;
-+	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+
-+	__asm__ __volatile__ ("bset %2,%1; sne %0"
-+	     : "=d" (retval), "+QUd" (*p)
-+	     : "di" (nr & 7));
-+	return retval;
-+}
-+#else
-+static __inline__ int __constant_coldfire_test_and_set_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	char retval;
-+	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+	__asm__ __volatile__ ("bset %2,(%4); sne %0"
-+	     : "=d" (retval), "=m" (*p)
-+	     : "di" (nr & 7), "m" (*p), "a" (p));
-+	return retval;
-+}
-+#endif
-+
-+static __inline__ int __generic_coldfire_test_and_set_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	char retval;
-+
-+	__asm__ __volatile__ ("bset %2,%1; sne %0"
-+	     : "=d" (retval), "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
-+	     : "d" (nr)
-+	     : "memory");
-+	return retval;
-+}
-+#define __test_and_set_bit(nr, vaddr) test_and_set_bit(nr, vaddr)
-+
-+#define set_bit(nr,vaddr)			\
-+  (__builtin_constant_p(nr) ?			\
-+   __constant_coldfire_set_bit(nr, vaddr) :	\
-+   __generic_coldfire_set_bit(nr, vaddr))
-+
-+#if 0
-+static __inline__ void __constant_coldfire_set_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+	__asm__ __volatile__ ("bset %1,%0"
-+	     : "+QUd" (*p) : "di" (nr & 7));
-+}
-+#else
-+static __inline__ void __constant_coldfire_set_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+	__asm__ __volatile__ ("bset %1,(%3)"
-+	     : "=m" (*p) : "di" (nr & 7), "m" (*p), "a" (p));
-+}
-+#endif
-+
-+static __inline__ void __generic_coldfire_set_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	__asm__ __volatile__ ("bset %1,%0"
-+	     : "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
-+	     : "d" (nr)
-+	     : "memory");
-+}
-+#define __set_bit(nr, vaddr) set_bit(nr, vaddr)
-+
-+#define test_and_clear_bit(nr, vaddr)			\
-+  (__builtin_constant_p(nr) ?				\
-+   __constant_coldfire_test_and_clear_bit(nr, vaddr) :	\
-+   __generic_coldfire_test_and_clear_bit(nr, vaddr))
-+
-+#if 0
-+static __inline__ int __constant_coldfire_test_and_clear_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	char retval;
-+	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+
-+	__asm__ __volatile__ ("bclr %2,%1; sne %0"
-+	     : "=d" (retval), "+QUd" (*p)
-+	     : "id" (nr & 7));
-+
-+	return retval;
-+}
-+#else
-+static __inline__ int __constant_coldfire_test_and_clear_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	char retval;
-+	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+
-+	__asm__ __volatile__ ("bclr %2,(%4); sne %0"
-+	     : "=d" (retval), "=m" (*p)
-+	     : "id" (nr & 7), "m" (*p), "a" (p));
-+
-+	return retval;
-+}
-+#endif
-+
-+static __inline__ int __generic_coldfire_test_and_clear_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	char retval;
-+
-+	__asm__ __volatile__ ("bclr %2,%1; sne %0"
-+	     : "=d" (retval), "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
-+	     : "d" (nr & 7)
-+	     : "memory");
-+
-+	return retval;
-+}
-+#define __test_and_clear_bit(nr, vaddr) test_and_clear_bit(nr, vaddr)
-+
-+/*
-+ * clear_bit() doesn't provide any barrier for the compiler.
-+ */
-+#define smp_mb__before_clear_bit()	barrier()
-+#define smp_mb__after_clear_bit()	barrier()
-+
-+#define clear_bit(nr,vaddr)			\
-+  (__builtin_constant_p(nr) ?			\
-+   __constant_coldfire_clear_bit(nr, vaddr) :	\
-+   __generic_coldfire_clear_bit(nr, vaddr))
-+
-+#if 0
-+static __inline__ void __constant_coldfire_clear_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+	__asm__ __volatile__ ("bclr %1,%0"
-+	     : "+QUd" (*p) : "id" (nr & 7));
-+}
-+#else
-+static __inline__ void __constant_coldfire_clear_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+	__asm__ __volatile__ ("bclr %1,(%3)"
-+	     : "=m" (*p) : "id" (nr & 7), "m" (*p), "a" (p));
-+}
-+#endif
-+
-+static __inline__ void __generic_coldfire_clear_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	__asm__ __volatile__ ("bclr %1,%0"
-+	     : "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
-+	     : "d" (nr)
-+	     : "memory");
-+}
-+#define __clear_bit(nr, vaddr) clear_bit(nr, vaddr)
-+
-+#define test_and_change_bit(nr, vaddr)			\
-+  (__builtin_constant_p(nr) ?				\
-+   __constant_coldfire_test_and_change_bit(nr, vaddr) :	\
-+   __generic_coldfire_test_and_change_bit(nr, vaddr))
-+
-+#if 0
-+static __inline__ int __constant_coldfire_test_and_change_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	char retval;
-+	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+
-+	__asm__ __volatile__ ("bchg %2,%1; sne %0"
-+	     : "=d" (retval), "+QUd" (*p)
-+	     : "id" (nr & 7));
-+
-+	return retval;
-+}
-+#else
-+static __inline__ int __constant_coldfire_test_and_change_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	char retval;
-+	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+
-+	__asm__ __volatile__ ("bchg %2,(%4); sne %0"
-+	     : "=d" (retval), "=m" (*p)
-+	     : "id" (nr & 7), "m" (*p), "a" (p));
-+
-+	return retval;
-+}
-+#endif
-+
-+static __inline__ int __generic_coldfire_test_and_change_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	char retval;
-+
-+	__asm__ __volatile__ ("bchg %2,%1; sne %0"
-+	     : "=d" (retval), "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
-+	     : "id" (nr)
-+	     : "memory");
-+
-+	return retval;
-+}
-+#define __test_and_change_bit(nr, vaddr) test_and_change_bit(nr, vaddr)
-+#define __change_bit(nr, vaddr) change_bit(nr, vaddr)
-+
-+#define change_bit(nr,vaddr)			\
-+  (__builtin_constant_p(nr) ?			\
-+   __constant_coldfire_change_bit(nr, vaddr) :	\
-+   __generic_coldfire_change_bit(nr, vaddr))
-+
-+#if 0
-+static __inline__ void __constant_coldfire_change_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+	__asm__ __volatile__ ("bchg %1,%0"
-+	     : "+QUd" (*p) : "id" (nr & 7));
-+}
-+#else
-+static __inline__ void __constant_coldfire_change_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
-+	__asm__ __volatile__ ("bchg %1,(%3)"
-+	     : "=m" (*p) : "id" (nr & 7), "m" (*p), "a" (p));
-+}
-+#endif
-+
-+static __inline__ void __generic_coldfire_change_bit(int nr,
-+	volatile void *vaddr)
-+{
-+	__asm__ __volatile__ ("bchg %1,%0"
-+	     : "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
-+	     : "d" (nr)
-+	     : "memory");
-+}
-+
-+static inline int test_bit(int nr, const unsigned long *vaddr)
-+{
-+	return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0;
-+}
-+
-+static __inline__ unsigned long ffz(unsigned long word)
-+{
-+	unsigned long result = 0;
-+
-+	while (word & 1) {
-+		result++;
-+		word >>= 1;
-+	}
-+	return result;
-+}
-+
-+/* find_next_zero_bit() finds the first zero bit in a bit string of length
-+ * 'size' bits, starting the search at bit 'offset'.  This is largely based
-+ * on Linus's ALPHA routines.
-+ */
-+static __inline__ unsigned long find_next_zero_bit(void *addr,
-+	unsigned long size, unsigned long offset)
-+{
-+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
-+	unsigned long result = offset & ~31UL;
-+	unsigned long tmp;
-+
-+	if (offset >= size)
-+		return size;
-+	size -= result;
-+	offset &= 31UL;
-+	if (offset) {
-+		tmp = *(p++);
-+		tmp |= ~0UL >> (32-offset);
-+		if (size < 32)
-+			goto found_first;
-+		if (~tmp)
-+			goto found_middle;
-+		size -= 32;
-+		result += 32;
-+	}
-+	while (size & ~31UL) {
-+		tmp = *(p++);
-+		if (~tmp)
-+			goto found_middle;
-+		result += 32;
-+		size -= 32;
-+	}
-+	if (!size)
-+		return result;
-+	tmp = *p;
-+
-+found_first:
-+	tmp |= ~0UL >> size;
-+found_middle:
-+	return result + ffz(tmp);
-+}
-+
-+#define find_first_zero_bit(addr, size) find_next_zero_bit(((void *)addr), \
-+		(size), 0)
-+
-+/* Ported from included/linux/bitops.h  */
-+static __inline__ int ffs(int x)
-+{
-+	int r = 1;
-+
-+	if (!x)
-+		return 0;
-+	if (!(x & 0xffff)) {
-+		x >>= 16;
-+		r += 16;
-+	}
-+	if (!(x & 0xff)) {
-+		x >>= 8;
-+		r += 8;
-+	}
-+	if (!(x & 0xf)) {
-+		x >>= 4;
-+		r += 4;
-+	}
-+	if (!(x & 3)) {
-+		x >>= 2;
-+		r += 2;
-+	}
-+	if (!(x & 1)) {
-+		x >>= 1;
-+		r += 1;
-+	}
-+	return r;
-+}
-+#define __ffs(x) (ffs(x) - 1)
-+
-+/* find_next_bit - find the next set bit in a memory region
-+ * (from asm-ppc/bitops.h)
-+ */
-+static __inline__ unsigned long find_next_bit(const unsigned long *addr,
-+	unsigned long size, unsigned long offset)
-+{
-+	unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
-+	unsigned int result = offset & ~31UL;
-+	unsigned int tmp;
-+
-+	if (offset >= size)
-+		return size;
-+	size -= result;
-+	offset &= 31UL;
-+	if (offset) {
-+		tmp = *p++;
-+		tmp &= ~0UL << offset;
-+		if (size < 32)
-+			goto found_first;
-+		if (tmp)
-+			goto found_middle;
-+		size -= 32;
-+		result += 32;
-+	}
-+	while (size >= 32) {
-+		tmp = *p++;
-+		if (tmp != 0)
-+			goto found_middle;
-+		result += 32;
-+		size -= 32;
-+	}
-+	if (!size)
-+		return result;
-+	tmp = *p;
-+
-+found_first:
-+	tmp &= ~0UL >> (32 - size);
-+	if (tmp == 0UL)        /* Are any bits set? */
-+		return result + size; /* Nope. */
-+found_middle:
-+	return result + __ffs(tmp);
-+}
-+
-+#define find_first_bit(addr, size) find_next_bit((addr), (size), 0)
-+
-+#ifdef __KERNEL__
-+
-+/* Ported from include/linux/bitops.h */
-+static  __inline__ int fls(int x)
-+{
-+	int r = 32;
-+
-+	if (!x)
-+		return 0;
-+	if (!(x & 0xffff0000u)) {
-+		x <<= 16;
-+		r -= 16;
-+	}
-+	if (!(x & 0xff000000u)) {
-+		x <<= 8;
-+		r -= 8;
-+	}
-+	if (!(x & 0xf0000000u)) {
-+		x <<= 4;
-+		r -= 4;
-+	}
-+	if (!(x & 0xc0000000u)) {
-+		x <<= 2;
-+		r -= 2;
-+	}
-+	if (!(x & 0x80000000u)) {
-+		x <<= 1;
-+		r -= 1;
-+	}
-+	return r;
-+}
-+
-+#include <asm-generic/bitops/fls64.h>
-+#include <asm-generic/bitops/sched.h>
-+#include <asm-generic/bitops/hweight.h>
-+#include <asm-generic/bitops/lock.h>
-+
-+#define minix_find_first_zero_bit(addr, size)	find_next_zero_bit((addr), \
-+							(size), 0)
-+#define minix_test_and_set_bit(nr, addr)	test_and_set_bit((nr), \
-+							(unsigned long *)(addr))
-+#define minix_set_bit(nr, addr)			set_bit((nr), \
-+							(unsigned long *)(addr))
-+#define minix_test_and_clear_bit(nr, addr)	test_and_clear_bit((nr), \
-+							(unsigned long *)(addr))
-+
-+static inline int minix_test_bit(int nr, const volatile unsigned long *vaddr)
-+{
-+	int 	*a = (int *)vaddr;
-+	int	mask;
-+
-+	a += nr >> 5;
-+	mask = 1 << (nr & 0x1f);
-+	return ((mask & *a) != 0);
-+}
-+
-+#define ext2_set_bit(nr, addr)			test_and_set_bit((nr) ^ 24, \
-+							(unsigned long *)(addr))
-+#define ext2_set_bit_atomic(lock, nr, addr)	test_and_set_bit((nr) ^ 24, \
-+							(unsigned long *)(addr))
-+#define ext2_clear_bit(nr, addr)		test_and_clear_bit((nr) ^ 24, \
-+							(unsigned long *)(addr))
-+#define ext2_clear_bit_atomic(lock, nr, addr)	test_and_clear_bit((nr) ^ 24, \
-+							(unsigned long *)(addr))
-+
-+static inline int ext2_test_bit(int nr, const void *vaddr)
-+{
-+	const unsigned char *p = vaddr;
-+	return (p[nr >> 3] & (1U << (nr & 7))) != 0;
-+}
-+
-+static inline int ext2_find_first_zero_bit(const void *vaddr, unsigned size)
-+{
-+	const unsigned long *p = vaddr, *addr = vaddr;
-+	int res;
-+
-+	if (!size)
-+		return 0;
-+
-+	size = (size >> 5) + ((size & 31) > 0);
-+	while (*p++ == ~0UL) {
-+		if (--size == 0)
-+			return (p - addr) << 5;
-+	}
-+
-+	--p;
-+	for (res = 0; res < 32; res++)
-+		if (!ext2_test_bit (res, p))
-+			break;
-+	return (p - addr) * 32 + res;
-+}
-+
-+static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size,
-+					  unsigned offset)
-+{
-+	const unsigned long *addr = vaddr;
-+	const unsigned long *p = addr + (offset >> 5);
-+	int bit = offset & 31UL, res;
-+
-+	if (offset >= size)
-+		return size;
-+
-+	if (bit) {
-+		/* Look for zero in first longword */
-+		for (res = bit; res < 32; res++)
-+			if (!ext2_test_bit (res, p))
-+				return (p - addr) * 32 + res;
-+		p++;
-+	}
-+	/* No zero yet, search remaining full bytes for a zero */
-+	res = ext2_find_first_zero_bit(p, size - 32 * (p - addr));
-+	return (p - addr) * 32 + res;
-+}
-+
-+#endif /* KERNEL */
-+
-+#endif /* CONFIG_COLDFIRE */
-+
- #endif /* _M68K_BITOPS_H */
---- a/include/asm-m68k/bootinfo.h
-+++ b/include/asm-m68k/bootinfo.h
-@@ -19,11 +19,59 @@
- **   Redesign of the boot information structure; renamed to bootinfo.h again
- ** 27/11/96 Geert Uytterhoeven:
- **   Backwards compatibility with bootinfo interface version 1.0
-+** 12/03/08 Kurt Mahan
-+**   Copy the bd_info structure from uboot1.3.2/include/asm-m68k/u-boot.h
-+**   into this file.  The original author is Wolfgang Denk, 
-+**   DENX Software Engineering, wd@denx.de.
- */
- 
- #ifndef _M68K_BOOTINFO_H
- #define _M68K_BOOTINFO_H
- 
-+#ifndef __ASSEMBLY__
-+/*
-+ * UBoot Support
-+ *
-+ * bd_info structure from uboot1.3.2/include/asm-m68k/u-boot.h
-+ */
-+struct bd_info {
-+	unsigned long bi_memstart;	/* start of DRAM memory */
-+	unsigned long bi_memsize;	/* size  of DRAM memory in bytes */
-+	unsigned long bi_flashstart;	/* start of FLASH memory */
-+	unsigned long bi_flashsize;	/* size  of FLASH memory */
-+	unsigned long bi_flashoffset;	/* reserved area for startup monitor */
-+	unsigned long bi_sramstart;	/* start of SRAM memory */
-+	unsigned long bi_sramsize;	/* size  of SRAM memory */
-+	unsigned long bi_mbar_base;	/* base of internal registers */
-+	unsigned long bi_bootflags;	/* boot / reboot flag (for LynxOS) */
-+	unsigned long bi_boot_params;	/* where this board expects params */
-+	unsigned long bi_ip_addr;	/* IP Address */
-+	unsigned char bi_enet0addr[6];	/* Ethernet 0 mac address */
-+	unsigned short bi_ethspeed;	/* Ethernet speed in Mbps */
-+	unsigned long bi_intfreq;	/* Internal Freq, in MHz */
-+	unsigned long bi_busfreq;	/* Bus Freq, in MHz */
-+#ifdef UBOOT_PCI
-+	unsigned long bi_pcifreq;	/* pci Freq in MHz */
-+#endif
-+#ifdef UBOOT_EXTRA_CLOCK
-+	unsigned long bi_inpfreq;	/* input Freq in MHz */
-+	unsigned long bi_vcofreq;	/* vco Freq in MHz */
-+	unsigned long bi_flbfreq;	/* Flexbus Freq in MHz */
-+#endif
-+	unsigned long bi_baudrate;	/* Console Baudrate */
-+	unsigned char bi_enet1addr[6];	/* eth1 mac address */
-+	unsigned char bi_enet2addr[6];	/* eth2 mac address */
-+	unsigned char bi_enet3addr[6];	/* eth3 mac address */
-+};
-+
-+struct uboot_record {
-+	struct bd_info *bdi;
-+    	unsigned long initrd_start;
-+    	unsigned long initrd_end;
-+    	unsigned long cmd_line_start;
-+    	unsigned long cmd_line_stop;
-+};
-+#endif /* __ASSEMBLY__ */
- 
-     /*
-      *  Bootinfo definitions
-@@ -49,6 +97,8 @@ struct bi_record {
- #endif /* __ASSEMBLY__ */
- 
- 
-+
-+
-     /*
-      *  Tag Definitions
-      *
---- a/include/asm-m68k/byteorder.h
-+++ b/include/asm-m68k/byteorder.h
-@@ -4,8 +4,15 @@
- #include <asm/types.h>
- #include <linux/compiler.h>
- 
--#ifdef __GNUC__
--
-+#if defined(__GNUC__)
-+#if defined(__mcfisaaplus__) || defined(__mcfisac__)
-+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 val)
-+{
-+	__asm__ ("byterev %0" : "=d" (val) : "0" (val));
-+	return val;
-+}
-+#define __arch__swab32(x) ___arch__swab32(x)
-+#elif !defined(__mcoldfire__)
- static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 val)
- {
- 	__asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val));
-@@ -14,6 +21,7 @@ static __inline__ __attribute_const__ __
- #define __arch__swab32(x) ___arch__swab32(x)
- 
- #endif
-+#endif
- 
- #if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
- #  define __BYTEORDER_HAS_U64__
---- a/include/asm-m68k/cacheflush.h
-+++ b/include/asm-m68k/cacheflush.h
-@@ -6,6 +6,9 @@
- /* cache code */
- #define FLUSH_I_AND_D	(0x00000808)
- #define FLUSH_I		(0x00000008)
-+#ifdef CONFIG_COLDFIRE
-+#include <asm/cf_cacheflush.h>
-+#else /* !CONFIG_COLDFIRE */
- 
- /*
-  * Cache handling functions
-@@ -153,4 +156,5 @@ static inline void copy_from_user_page(s
- 	memcpy(dst, src, len);
- }
- 
-+#endif /* !CONFIG_COLDFIRE */
- #endif /* _M68K_CACHEFLUSH_H */
---- /dev/null
-+++ b/include/asm-m68k/cf_5445x_cacheflush.h
-@@ -0,0 +1,447 @@
-+/*
-+ * include/asm-m68k/cf_5445x_cacheflush.h - Coldfire 5445x Cache
-+ *
-+ * Based on include/asm-m68k/cacheflush.h
-+ *
-+ * Coldfire pieces by:
-+ *   Kurt Mahan kmahan@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007, 2008
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+#ifndef M68K_CF_5445x_CACHEFLUSH_H
-+#define M68K_CF_5445x_CACHEFLUSH_H
-+
-+#include <asm/cfcache.h>
-+
-+/*
-+ * Coldfire Cache Model
-+ *
-+ * The Coldfire processors use a Harvard architecture cache configured
-+ * as four-way set associative.  The cache does not implement bus snooping
-+ * so cache coherency with other masters must be maintained in software.
-+ *
-+ * The cache is managed via the CPUSHL instruction in conjunction with
-+ * bits set in the CACR (cache control register).  Currently the code
-+ * uses the CPUSHL enhancement which adds the ability to
-+ * invalidate/clear/push a cacheline by physical address.  This feature
-+ * is designated in the Hardware Configuration Register [D1-CPES].
-+ *
-+ * CACR Bits:
-+ *	DPI[28]		cpushl invalidate disable for d-cache
-+ *	IDPI[12]	cpushl invalidate disable for i-cache
-+ *	SPA[14]		cpushl search by physical address
-+ *	IVO[20]		cpushl invalidate only
-+ *
-+ * Random Terminology:
-+ *  * invalidate = reset the cache line's valid bit
-+ *  * push = generate a line-sized store of the data if its contents are marked
-+ *	     as modifed (the modified flag is cleared after the store)
-+ *  * clear = push + invalidate
-+ */
-+
-+/**
-+ * flush_icache - Flush all of the instruction cache
-+ */
-+static inline void flush_icache(void)
-+{
-+	asm volatile("nop\n"
-+		     "moveq%.l	#0,%%d0\n"
-+		     "moveq%.l	#0,%%d1\n"
-+		     "move%.l	%%d0,%%a0\n"
-+		     "1:\n"
-+		     "cpushl	%%ic,(%%a0)\n"
-+		     "add%.l	#0x0010,%%a0\n"
-+		     "addq%.l	#1,%%d1\n"
-+		     "cmpi%.l	%0,%%d1\n"
-+		     "bne	1b\n"
-+		     "moveq%.l	#0,%%d1\n"
-+		     "addq%.l	#1,%%d0\n"
-+		     "move%.l	%%d0,%%a0\n"
-+		     "cmpi%.l	#4,%%d0\n"
-+		     "bne	1b\n"
-+		     : : "i" (CACHE_SETS)
-+		     : "a0", "d0", "d1");
-+}
-+
-+/**
-+ * flush_dcache - Flush all of the data cache
-+ */
-+static inline void flush_dcache(void)
-+{
-+	asm volatile("nop\n"
-+		     "moveq%.l	#0,%%d0\n"
-+		     "moveq%.l	#0,%%d1\n"
-+		     "move%.l	%%d0,%%a0\n"
-+		     "1:\n"
-+		     "cpushl	%%dc,(%%a0)\n"
-+		     "add%.l	#0x0010,%%a0\n"
-+		     "addq%.l	#1,%%d1\n"
-+		     "cmpi%.l	%0,%%d1\n"
-+		     "bne	1b\n"
-+		     "moveq%.l	#0,%%d1\n"
-+		     "addq%.l	#1,%%d0\n"
-+		     "move%.l	%%d0,%%a0\n"
-+		     "cmpi%.l	#4,%%d0\n"
-+		     "bne	1b\n"
-+		     : : "i" (CACHE_SETS)
-+		     : "a0", "d0", "d1");
-+}
-+
-+/**
-+ * flush_bcache - Flush all of both caches
-+ */
-+static inline void flush_bcache(void)
-+{
-+	asm volatile("nop\n"
-+		     "moveq%.l	#0,%%d0\n"
-+		     "moveq%.l	#0,%%d1\n"
-+		     "move%.l	%%d0,%%a0\n"
-+		     "1:\n"
-+		     "cpushl	%%bc,(%%a0)\n"
-+		     "add%.l	#0x0010,%%a0\n"
-+		     "addq%.l	#1,%%d1\n"
-+		     "cmpi%.l	%0,%%d1\n"
-+		     "bne	1b\n"
-+		     "moveq%.l	#0,%%d1\n"
-+		     "addq%.l	#1,%%d0\n"
-+		     "move%.l	%%d0,%%a0\n"
-+		     "cmpi%.l	#4,%%d0\n"
-+		     "bne	1b\n"
-+		     : : "i" (CACHE_SETS)
-+		     : "a0", "d0", "d1");
-+}
-+
-+/**
-+ * cf_cache_clear - invalidate cache
-+ * @paddr: starting physical address
-+ * @len: number of bytes
-+ *
-+ * Invalidate cache lines starting at paddr for len bytes.
-+ * Those lines are not pushed.
-+ */
-+static inline void cf_cache_clear(unsigned long paddr, int len)
-+{
-+	/* number of lines */
-+	len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
-+	if (len == 0)
-+		return;
-+
-+	/* align on set boundary */
-+	paddr &= 0xfffffff0;
-+
-+	asm volatile("nop\n"
-+		     "move%.l   %2,%%d0\n"
-+		     "or%.l	%3,%%d0\n"
-+		     "movec	%%d0,%%cacr\n"
-+		     "move%.l	%0,%%a0\n"
-+		     "move%.l	%1,%%d0\n"
-+		     "1:\n"
-+		     "cpushl	%%bc,(%%a0)\n"
-+		     "lea	0x10(%%a0),%%a0\n"
-+		     "subq%.l	#1,%%d0\n"
-+		     "bne%.b	1b\n"
-+		     "movec	%2,%%cacr\n"
-+		     : : "a" (paddr), "r" (len),
-+			 "r" (shadow_cacr),
-+			 "i" (CF_CACR_SPA+CF_CACR_IVO)
-+		     : "a0", "d0");
-+}
-+
-+/**
-+ * cf_cache_push - Push dirty cache out with no invalidate
-+ * @paddr: starting physical address
-+ * @len: number of bytes
-+ *
-+ * Push the any dirty lines starting at paddr for len bytes.
-+ * Those lines are not invalidated.
-+ */
-+static inline void cf_cache_push(unsigned long paddr, int len)
-+{
-+	/* number of lines */
-+	len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
-+	if (len == 0)
-+		return;
-+
-+	/* align on set boundary */
-+	paddr &= 0xfffffff0;
-+
-+	asm volatile("nop\n"
-+		     "move%.l   %2,%%d0\n"
-+		     "or%.l	%3,%%d0\n"
-+		     "movec	%%d0,%%cacr\n"
-+		     "move%.l	%0,%%a0\n"
-+		     "move%.l	%1,%%d0\n"
-+		     "1:\n"
-+		     "cpushl	%%bc,(%%a0)\n"
-+		     "lea	0x10(%%a0),%%a0\n"
-+		     "subq%.l	#1,%%d0\n"
-+		     "bne.b	1b\n"
-+		     "movec	%2,%%cacr\n"
-+		     : : "a" (paddr), "r" (len),
-+			 "r" (shadow_cacr),
-+			 "i" (CF_CACR_SPA+CF_CACR_DPI+CF_CACR_IDPI)
-+		     : "a0", "d0");
-+}
-+
-+/**
-+ * cf_cache_flush - Push dirty cache out and invalidate
-+ * @paddr: starting physical address
-+ * @len: number of bytes
-+ *
-+ * Push the any dirty lines starting at paddr for len bytes and
-+ * invalidate those lines.
-+ */
-+static inline void cf_cache_flush(unsigned long paddr, int len)
-+{
-+	/* number of lines */
-+	len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
-+	if (len == 0)
-+		return;
-+
-+	/* align on set boundary */
-+	paddr &= 0xfffffff0;
-+
-+	asm volatile("nop\n"
-+		     "move%.l   %2,%%d0\n"
-+		     "or%.l	%3,%%d0\n"
-+		     "movec	%%d0,%%cacr\n"
-+		     "move%.l	%0,%%a0\n"
-+		     "move%.l	%1,%%d0\n"
-+		     "1:\n"
-+		     "cpushl	%%bc,(%%a0)\n"
-+		     "lea	0x10(%%a0),%%a0\n"
-+		     "subq%.l	#1,%%d0\n"
-+		     "bne.b	1b\n"
-+		     "movec	%2,%%cacr\n"
-+		     : : "a" (paddr), "r" (len),
-+			 "r" (shadow_cacr),
-+			 "i" (CF_CACR_SPA)
-+		     : "a0", "d0");
-+}
-+
-+/**
-+ * cf_cache_flush_range - Push dirty data/inst cache in range out and invalidate
-+ * @vstart - starting virtual address
-+ * @vend: ending virtual address
-+ *
-+ * Push the any dirty data/instr lines starting at paddr for len bytes and
-+ * invalidate those lines.
-+ */
-+static inline void cf_cache_flush_range(unsigned long vstart, unsigned long vend)
-+{
-+	int len;
-+
-+	/* align on set boundary */
-+	vstart &= 0xfffffff0;
-+	vend = PAGE_ALIGN((vend + (CACHE_LINE_SIZE-1))) & 0xfffffff0;
-+	len = vend - vstart;
-+	if (len == 0)
-+		return;
-+	vstart = __pa(vstart);
-+	vend = vstart + len;
-+
-+	asm volatile("nop\n"
-+		     "move%.l   %2,%%d0\n"
-+		     "or%.l	%3,%%d0\n"
-+		     "movec	%%d0,%%cacr\n"
-+		     "move%.l	%0,%%a0\n"
-+		     "move%.l	%1,%%a1\n"
-+		     "1:\n"
-+		     "cpushl	%%bc,(%%a0)\n"
-+		     "lea	0x10(%%a0),%%a0\n"
-+		     "cmpa%.l	%%a0,%%a1\n"
-+		     "bne.b	1b\n"
-+		     "movec	%2,%%cacr\n"
-+		     : /* no return */
-+		     : "a" (vstart), "a" (vend),
-+		       "r" (shadow_cacr),
-+		       "i" (CF_CACR_SPA)
-+		     : "a0", "a1", "d0");
-+}
-+
-+/**
-+ * cf_dcache_flush_range - Push dirty data cache in range out and invalidate
-+ * @vstart - starting virtual address
-+ * @vend: ending virtual address
-+ *
-+ * Push the any dirty data lines starting at paddr for len bytes and
-+ * invalidate those lines.
-+ */
-+static inline void cf_dcache_flush_range(unsigned long vstart, unsigned long vend)
-+{
-+	/* align on set boundary */
-+	vstart &= 0xfffffff0;
-+	vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
-+
-+	asm volatile("nop\n"
-+		     "move%.l   %2,%%d0\n"
-+		     "or%.l	%3,%%d0\n"
-+		     "movec	%%d0,%%cacr\n"
-+		     "move%.l	%0,%%a0\n"
-+		     "move%.l	%1,%%a1\n"
-+		     "1:\n"
-+		     "cpushl	%%dc,(%%a0)\n"
-+		     "lea	0x10(%%a0),%%a0\n"
-+		     "cmpa%.l	%%a0,%%a1\n"
-+		     "bne.b	1b\n"
-+		     "movec	%2,%%cacr\n"
-+		     : /* no return */
-+		     : "a" (__pa(vstart)), "a" (__pa(vend)),
-+		       "r" (shadow_cacr),
-+		       "i" (CF_CACR_SPA)
-+		     : "a0", "a1", "d0");
-+}
-+
-+/**
-+ * cf_icache_flush_range - Push dirty inst cache in range out and invalidate
-+ * @vstart - starting virtual address
-+ * @vend: ending virtual address
-+ *
-+ * Push the any dirty instr lines starting at paddr for len bytes and
-+ * invalidate those lines.  This should just be an invalidate since you
-+ * shouldn't be able to have dirty instruction cache.
-+ */
-+static inline void cf_icache_flush_range(unsigned long vstart, unsigned long vend)
-+{
-+	/* align on set boundary */
-+	vstart &= 0xfffffff0;
-+	vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
-+
-+	asm volatile("nop\n"
-+		     "move%.l   %2,%%d0\n"
-+		     "or%.l	%3,%%d0\n"
-+		     "movec	%%d0,%%cacr\n"
-+		     "move%.l	%0,%%a0\n"
-+		     "move%.l	%1,%%a1\n"
-+		     "1:\n"
-+		     "cpushl	%%ic,(%%a0)\n"
-+		     "lea	0x10(%%a0),%%a0\n"
-+		     "cmpa%.l	%%a0,%%a1\n"
-+		     "bne.b	1b\n"
-+		     "movec	%2,%%cacr\n"
-+		     : /* no return */
-+		     : "a" (__pa(vstart)), "a" (__pa(vend)),
-+		       "r" (shadow_cacr),
-+		       "i" (CF_CACR_SPA)
-+		     : "a0", "a1", "d0");
-+}
-+
-+/**
-+ * flush_cache_mm - Flush an mm_struct
-+ * @mm: mm_struct to flush
-+ */
-+static inline void flush_cache_mm(struct mm_struct *mm)
-+{
-+	if (mm == current->mm)
-+		flush_bcache();
-+}
-+
-+#define flush_cache_dup_mm(mm)	flush_cache_mm(mm)
-+
-+/**
-+ * flush_cache_range - Flush a cache range
-+ * @vma: vma struct
-+ * @start: Starting address
-+ * @end: Ending address
-+ *
-+ * flush_cache_range must be a macro to avoid a dependency on
-+ * linux/mm.h which includes this file.
-+ */
-+static inline void flush_cache_range(struct vm_area_struct *vma,
-+	unsigned long start, unsigned long end)
-+{
-+	if (vma->vm_mm == current->mm)
-+		cf_cache_flush_range(start, end);
-+}
-+
-+/**
-+ * flush_cache_page - Flush a page of the cache
-+ * @vma: vma struct
-+ * @vmaddr:
-+ * @pfn: page numer
-+ *
-+ * flush_cache_page must be a macro to avoid a dependency on
-+ * linux/mm.h which includes this file.
-+ */
-+static inline void flush_cache_page(struct vm_area_struct *vma,
-+	unsigned long vmaddr, unsigned long pfn)
-+{
-+	if (vma->vm_mm == current->mm)
-+		cf_cache_flush_range(vmaddr, vmaddr+PAGE_SIZE);
-+}
-+
-+/**
-+ * __flush_page_to_ram - Push a page out of the cache
-+ * @vaddr: Virtual address at start of page
-+ *
-+ * Push the page at kernel virtual address *vaddr* and clear
-+ * the icache.
-+ */
-+static inline void __flush_page_to_ram(void *vaddr)
-+{
-+	asm volatile("nop\n"
-+		     "move%.l   %2,%%d0\n"
-+		     "or%.l	%3,%%d0\n"
-+		     "movec	%%d0,%%cacr\n"
-+		     "move%.l	%0,%%d0\n"
-+		     "and%.l	#0xfffffff0,%%d0\n"
-+		     "move%.l	%%d0,%%a0\n"
-+		     "move%.l	%1,%%d0\n"
-+		     "1:\n"
-+		     "cpushl	%%bc,(%%a0)\n"
-+		     "lea	0x10(%%a0),%%a0\n"
-+		     "subq%.l	#1,%%d0\n"
-+		     "bne.b	1b\n"
-+		     "movec	%2,%%cacr\n"
-+		     : : "a" (__pa(vaddr)), "i" (PAGE_SIZE / CACHE_LINE_SIZE),
-+			 "r" (shadow_cacr), "i" (CF_CACR_SPA)
-+		     : "a0", "d0");
-+}
-+
-+/*
-+ * Various defines for the kernel.
-+ */
-+
-+extern void cache_clear(unsigned long paddr, int len);
-+extern void cache_push(unsigned long paddr, int len);
-+extern void flush_icache_range(unsigned long address, unsigned long endaddr);
-+
-+#define flush_cache_all()			flush_bcache()
-+#define flush_cache_vmap(start, end)		flush_bcache()
-+#define flush_cache_vunmap(start, end)		flush_bcache()
-+
-+#define flush_dcache_range(vstart, vend)	cf_dcache_flush_range(vstart, vend)
-+#define flush_dcache_page(page)			__flush_page_to_ram(page_address(page))
-+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-+
-+#define flush_icache_page(vma, page)		__flush_page_to_ram(page_address(page))
-+
-+/**
-+ * copy_to_user_page - Copy memory to user page
-+ */
-+static inline void copy_to_user_page(struct vm_area_struct *vma,
-+				     struct page *page, unsigned long vaddr,
-+				     void *dst, void *src, int len)
-+{
-+	memcpy(dst, src, len);
-+	cf_cache_flush(page_to_phys(page), PAGE_SIZE);
-+}
-+
-+/**
-+ * copy_from_user_page - Copy memory from user page
-+ */
-+static inline void copy_from_user_page(struct vm_area_struct *vma,
-+				       struct page *page, unsigned long vaddr,
-+				       void *dst, void *src, int len)
-+{
-+	cf_cache_flush(page_to_phys(page), PAGE_SIZE);
-+	memcpy(dst, src, len);
-+}
-+
-+#endif /* M68K_CF_5445x_CACHEFLUSH_H */
---- /dev/null
-+++ b/include/asm-m68k/cf_548x_cacheflush.h
-@@ -0,0 +1,259 @@
-+/*
-+ * include/asm-m68k/cf_548x_cacheflush.h - Coldfire 547x/548x Cache
-+ *
-+ * Based on include/asm-m68k/cacheflush.h
-+ *
-+ * Coldfire pieces by:
-+ *   Kurt Mahan kmahan@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007, 2008
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+#ifndef M68K_CF_548x_CACHEFLUSH_H
-+#define M68K_CF_548x_CACHEFLUSH_H
-+
-+#include <asm/cfcache.h>
-+/*
-+ * Cache handling functions
-+ */
-+
-+#define flush_icache()						\
-+({								\
-+  unsigned long set;						\
-+  unsigned long start_set;					\
-+  unsigned long end_set;					\
-+								\
-+  start_set = 0;						\
-+  end_set = (unsigned long)LAST_DCACHE_ADDR;			\
-+    								\
-+  for (set = start_set; set <= end_set; set += (0x10 - 3)) {	\
-+    asm volatile("cpushl %%ic,(%0)\n"				\
-+                 "\taddq%.l #1,%0\n"				\
-+                 "\tcpushl %%ic,(%0)\n"				\
-+                 "\taddq%.l #1,%0\n"				\
-+                 "\tcpushl %%ic,(%0)\n"				\
-+                 "\taddq%.l #1,%0\n"				\
-+                 "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set));		\
-+  }								\
-+})
-+
-+#define flush_dcache()						\
-+({								\
-+  unsigned long set;						\
-+  unsigned long start_set;					\
-+  unsigned long end_set;					\
-+								\
-+  start_set = 0;						\
-+  end_set = (unsigned long)LAST_DCACHE_ADDR;			\
-+    								\
-+  for (set = start_set; set <= end_set; set += (0x10 - 3)) {	\
-+    asm volatile("cpushl %%dc,(%0)\n"				\
-+                 "\taddq%.l #1,%0\n"				\
-+                 "\tcpushl %%dc,(%0)\n"				\
-+                 "\taddq%.l #1,%0\n"				\
-+                 "\tcpushl %%dc,(%0)\n"				\
-+                 "\taddq%.l #1,%0\n"				\
-+                 "\tcpushl %%dc,(%0)" : "=a" (set) : "a" (set));		\
-+  }								\
-+})
-+
-+#define flush_bcache()						\
-+({								\
-+  unsigned long set;						\
-+  unsigned long start_set;					\
-+  unsigned long end_set;					\
-+								\
-+  start_set = 0;						\
-+  end_set = (unsigned long)LAST_DCACHE_ADDR;			\
-+    								\
-+  for (set = start_set; set <= end_set; set += (0x10 - 3)) {	\
-+    asm volatile("cpushl %%bc,(%0)\n"				\
-+                 "\taddq%.l #1,%0\n"				\
-+                 "\tcpushl %%bc,(%0)\n"				\
-+                 "\taddq%.l #1,%0\n"				\
-+                 "\tcpushl %%bc,(%0)\n"				\
-+                 "\taddq%.l #1,%0\n"				\
-+                 "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set));		\
-+  }								\
-+})
-+
-+/*
-+ * invalidate the cache for the specified memory range.
-+ * It starts at the physical address specified for
-+ * the given number of bytes.
-+ */
-+extern void cache_clear(unsigned long paddr, int len);
-+/*
-+ * push any dirty cache in the specified memory range.
-+ * It starts at the physical address specified for
-+ * the given number of bytes.
-+ */
-+extern void cache_push(unsigned long paddr, int len);
-+
-+/*
-+ * push and invalidate pages in the specified user virtual
-+ * memory range.
-+ */
-+extern void cache_push_v(unsigned long vaddr, int len);
-+
-+/* This is needed whenever the virtual mapping of the current
-+   process changes.  */
-+
-+/**
-+ * flush_cache_mm - Flush an mm_struct
-+ * @mm: mm_struct to flush
-+ */
-+static inline void flush_cache_mm(struct mm_struct *mm)
-+{
-+	if (mm == current->mm)
-+		flush_bcache();
-+}
-+
-+#define flush_cache_dup_mm(mm)	flush_cache_mm(mm)
-+
-+#define flush_cache_all()		flush_bcache()
-+
-+/**
-+ * flush_cache_range - Flush a cache range
-+ * @vma: vma struct
-+ * @start: Starting address
-+ * @end: Ending address
-+ *
-+ * flush_cache_range must be a macro to avoid a dependency on
-+ * linux/mm.h which includes this file.
-+ */
-+static inline void flush_cache_range(struct vm_area_struct *vma,
-+	unsigned long start, unsigned long end)
-+{
-+	if (vma->vm_mm == current->mm)
-+		flush_bcache();
-+//		cf_cache_flush_range(start, end);
-+}
-+
-+/**
-+ * flush_cache_page - Flush a page of the cache
-+ * @vma: vma struct
-+ * @vmaddr:
-+ * @pfn: page numer
-+ *
-+ * flush_cache_page must be a macro to avoid a dependency on
-+ * linux/mm.h which includes this file.
-+ */
-+static inline void flush_cache_page(struct vm_area_struct *vma,
-+	unsigned long vmaddr, unsigned long pfn)
-+{
-+	if (vma->vm_mm == current->mm)
-+		flush_bcache();
-+//		cf_cache_flush_range(vmaddr, vmaddr+PAGE_SIZE);
-+}
-+
-+/* Push the page at kernel virtual address and clear the icache */
-+/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
-+#define flush_page_to_ram(page) __flush_page_to_ram((void *) page_address(page))
-+extern inline void __flush_page_to_ram(void *address)
-+{
-+  unsigned long set;
-+  unsigned long start_set;
-+  unsigned long end_set;
-+  unsigned long addr = (unsigned long) address;
-+
-+  addr &= ~(PAGE_SIZE - 1); /* round down to page start address */
-+
-+  start_set = addr & _ICACHE_SET_MASK;
-+  end_set = (addr + PAGE_SIZE-1) & _ICACHE_SET_MASK;
-+
-+  if (start_set > end_set) {
-+    /* from the begining to the lowest address */
-+    for (set = 0; set <= end_set; set += (0x10 - 3)) {
-+      asm volatile("cpushl %%bc,(%0)\n"
-+                   "\taddq%.l #1,%0\n"
-+                   "\tcpushl %%bc,(%0)\n"
-+                   "\taddq%.l #1,%0\n"
-+                   "\tcpushl %%bc,(%0)\n"
-+                   "\taddq%.l #1,%0\n"
-+                   "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set));
-+    }
-+    /* next loop will finish the cache ie pass the hole */
-+    end_set = LAST_ICACHE_ADDR;    
-+  }
-+  for (set = start_set; set <= end_set; set += (0x10 - 3)) {
-+    asm volatile("cpushl %%bc,(%0)\n"
-+                 "\taddq%.l #1,%0\n"
-+                 "\tcpushl %%bc,(%0)\n"
-+                 "\taddq%.l #1,%0\n"
-+                 "\tcpushl %%bc,(%0)\n"
-+                 "\taddq%.l #1,%0\n"
-+                 "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set));
-+  }
-+}
-+
-+/* Use __flush_page_to_ram() for flush_dcache_page all values are same - MW */
-+#define flush_dcache_page(page)			\
-+	__flush_page_to_ram((void *) page_address(page))
-+#define flush_icache_page(vma,pg)		\
-+	__flush_page_to_ram((void *) page_address(pg))
-+#define flush_icache_user_range(adr,len)	do { } while (0)
-+/* NL */
-+#define flush_icache_user_page(vma,page,addr,len)	do { } while (0)
-+
-+/* Push n pages at kernel virtual address and clear the icache */
-+/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
-+extern inline void flush_icache_range (unsigned long address,
-+				       unsigned long endaddr)
-+{
-+  unsigned long set;
-+  unsigned long start_set;
-+  unsigned long end_set;
-+
-+  start_set = address & _ICACHE_SET_MASK;
-+  end_set = endaddr & _ICACHE_SET_MASK;
-+
-+  if (start_set > end_set) {
-+    /* from the begining to the lowest address */
-+    for (set = 0; set <= end_set; set += (0x10 - 3)) {
-+      asm volatile("cpushl %%ic,(%0)\n"
-+                   "\taddq%.l #1,%0\n"
-+                   "\tcpushl %%ic,(%0)\n"
-+                   "\taddq%.l #1,%0\n"
-+                   "\tcpushl %%ic,(%0)\n"
-+                   "\taddq%.l #1,%0\n"
-+                   "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set));
-+    }
-+    /* next loop will finish the cache ie pass the hole */
-+    end_set = LAST_ICACHE_ADDR;    
-+  }
-+  for (set = start_set; set <= end_set; set += (0x10 - 3)) {
-+    asm volatile("cpushl %%ic,(%0)\n"
-+                 "\taddq%.l #1,%0\n"
-+                 "\tcpushl %%ic,(%0)\n"
-+                 "\taddq%.l #1,%0\n"
-+                 "\tcpushl %%ic,(%0)\n"
-+                 "\taddq%.l #1,%0\n"
-+                 "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set));
-+  }
-+}
-+
-+static inline void copy_to_user_page(struct vm_area_struct *vma,
-+				     struct page *page, unsigned long vaddr,
-+				     void *dst, void *src, int len)
-+{
-+	memcpy(dst, src, len);
-+	flush_icache_user_page(vma, page, vaddr, len);
-+}
-+static inline void copy_from_user_page(struct vm_area_struct *vma,
-+				       struct page *page, unsigned long vaddr,
-+				       void *dst, void *src, int len)
-+{
-+	memcpy(dst, src, len);
-+}
-+
-+#define flush_cache_vmap(start, end)		flush_cache_all()
-+#define flush_cache_vunmap(start, end)		flush_cache_all()
-+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-+
-+#endif /* M68K_CF_548x_CACHEFLUSH_H */
---- /dev/null
-+++ b/include/asm-m68k/cf_cacheflush.h
-@@ -0,0 +1,10 @@
-+#ifndef M68K_CF_CACHEFLUSH_H
-+#define M68K_CF_CACHEFLUSH_H
-+
-+#ifdef CONFIG_M5445X
-+#include "cf_5445x_cacheflush.h"
-+#else
-+#include "cf_548x_cacheflush.h"
-+#endif
-+
-+#endif /* M68K_CF_CACHEFLUSH_H */
---- /dev/null
-+++ b/include/asm-m68k/cfcache.h
-@@ -0,0 +1,114 @@
-+/*
-+ * include/asm-m68k/cfcache.h - Coldfire Cache Controller
-+ *
-+ * Kurt Mahan kmahan@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+#ifndef CF_CFCACHE_H
-+#define CF_CFCACHE_H
-+
-+/*
-+ * CACR Cache Control Register
-+ */
-+#define CF_CACR_DEC         (0x80000000) /* Data Cache Enable                */
-+#define CF_CACR_DW          (0x40000000) /* Data default Write-protect       */
-+#define CF_CACR_DESB        (0x20000000) /* Data Enable Store Buffer         */
-+#define CF_CACR_DPI         (0x10000000) /* Data Disable CPUSHL Invalidate   */
-+#define CF_CACR_DHLCK       (0x08000000) /* 1/2 Data Cache Lock Mode         */
-+#define CF_CACR_DDCM_00     (0x00000000) /* Cacheable writethrough imprecise */
-+#define CF_CACR_DDCM_01     (0x02000000) /* Cacheable copyback               */
-+#define CF_CACR_DDCM_10     (0x04000000) /* Noncacheable precise             */
-+#define CF_CACR_DDCM_11     (0x06000000) /* Noncacheable imprecise           */
-+#define CF_CACR_DCINVA      (0x01000000) /* Data Cache Invalidate All        */
-+#define CF_CACR_DDSP        (0x00800000) /* Data default supervisor-protect  */
-+#define CF_CACR_IVO         (0x00100000) /* Invalidate only                  */
-+#define CF_CACR_BEC         (0x00080000) /* Branch Cache Enable              */
-+#define CF_CACR_BCINVA      (0x00040000) /* Branch Cache Invalidate All      */
-+#define CF_CACR_IEC         (0x00008000) /* Instruction Cache Enable         */
-+#define CF_CACR_SPA         (0x00004000) /* Search by Physical Address       */
-+#define CF_CACR_DNFB        (0x00002000) /* Default cache-inhibited fill buf */
-+#define CF_CACR_IDPI        (0x00001000) /* Instr Disable CPUSHL Invalidate  */
-+#define CF_CACR_IHLCK       (0x00000800) /* 1/2 Instruction Cache Lock Mode  */
-+#define CF_CACR_IDCM        (0x00000400) /* Noncacheable Instr default mode  */
-+#define CF_CACR_ICINVA      (0x00000100) /* Instr Cache Invalidate All       */
-+#define CF_CACR_IDSP	    (0x00000080) /* Ins default supervisor-protect   */
-+#define CF_CACR_EUSP        (0x00000020) /* Switch stacks in user mode       */
-+
-+#ifdef CONFIG_M5445X
-+/*
-+ * M5445x Cache Configuration
-+ *	- cache line size is 16 bytes
-+ *	- cache is 4-way set associative
-+ *	- each cache has 256 sets (64k / 16bytes / 4way)
-+ *	- I-Cache size is 16KB
-+ *	- D-Cache size is 16KB
-+ */
-+#define ICACHE_SIZE 0x4000		/* instruction - 16k */
-+#define DCACHE_SIZE 0x4000		/* data - 16k */
-+
-+#define CACHE_LINE_SIZE 0x0010		/* 16 bytes */
-+#define CACHE_SETS 0x0100		/* 256 sets */
-+#define CACHE_WAYS 0x0004		/* 4 way */
-+
-+#define CACHE_DISABLE_MODE	(CF_CACR_DCINVA+	\
-+				 CF_CACR_BCINVA+	\
-+				 CF_CACR_ICINVA)
-+
-+#ifndef CONFIG_M5445X_DISABLE_CACHE
-+#define CACHE_INITIAL_MODE 	(CF_CACR_DEC+		\
-+				 CF_CACR_BEC+		\
-+				 CF_CACR_IEC+		\
-+				 CF_CACR_DESB+		\
-+				 CF_CACR_EUSP)
-+#else
-+/* cache disabled for testing */
-+#define CACHE_INITIAL_MODE 	(CF_CACR_EUSP)
-+#endif /* CONFIG_M5445X_DISABLE_CACHE */
-+
-+#elif defined(CONFIG_M547X_8X)
-+/*
-+ * M547x/M548x Cache Configuration
-+ *	- cache line size is 16 bytes
-+ *	- cache is 4-way set associative
-+ *	- each cache has 512 sets (128k / 16bytes / 4way)
-+ *	- I-Cache size is 32KB
-+ *	- D-Cache size is 32KB
-+ */
-+#define ICACHE_SIZE 0x8000		/* instruction - 32k */
-+#define DCACHE_SIZE 0x8000		/* data - 32k */
-+
-+#define CACHE_LINE_SIZE 0x0010		/* 16 bytes */
-+#define CACHE_SETS 0x0200		/* 512 sets */
-+#define CACHE_WAYS 0x0004		/* 4 way */
-+
-+/* in for the old cpushl caching code */
-+#define _DCACHE_SET_MASK ((DCACHE_SIZE/64-1)<<CACHE_WAYS)
-+#define _ICACHE_SET_MASK ((ICACHE_SIZE/64-1)<<CACHE_WAYS)
-+#define LAST_DCACHE_ADDR _DCACHE_SET_MASK
-+#define LAST_ICACHE_ADDR _ICACHE_SET_MASK
-+
-+#define CACHE_DISABLE_MODE	(CF_CACR_DCINVA+	\
-+				 CF_CACR_BCINVA+	\
-+				 CF_CACR_ICINVA)
-+
-+#define CACHE_INITIAL_MODE 	(CF_CACR_DEC+		\
-+				 CF_CACR_BEC+		\
-+				 CF_CACR_IEC+		\
-+				 CF_CACR_DESB+		\
-+				 CF_CACR_EUSP)
-+#endif /* CONFIG_M547X_8X */
-+
-+#ifndef __ASSEMBLY__
-+
-+extern unsigned long shadow_cacr;
-+extern void cacr_set(unsigned long x);
-+
-+#endif /* !__ASSEMBLY__ */
-+
-+#endif /* CF_CACHE_H */
---- /dev/null
-+++ b/include/asm-m68k/cf_entry.h
-@@ -0,0 +1,146 @@
-+#ifndef __CF_M68K_ENTRY_H
-+#define __CF_M68K_ENTRY_H
-+
-+#include <asm/setup.h>
-+#include <asm/page.h>
-+#include <asm/coldfire.h>
-+#include <asm/cfmmu.h>
-+#include <asm/asm-offsets.h>
-+
-+/*
-+ * Stack layout in 'ret_from_exception':
-+ *
-+ *	This allows access to the syscall arguments in registers d1-d5
-+ *
-+ *	 0(sp) - d1
-+ *	 4(sp) - d2
-+ *	 8(sp) - d3
-+ *	 C(sp) - d4
-+ *	10(sp) - d5
-+ *	14(sp) - a0
-+ *	18(sp) - a1
-+ *	1C(sp) - a2
-+ *	20(sp) - d0
-+ *	24(sp) - orig_d0
-+ *	28(sp) - stack adjustment
-+ *	2C(sp) - sr
-+ *	2E(sp) - pc
-+ *	32(sp) - format & vector
-+ *	36(sp) - MMUSR
-+ *	3A(sp) - MMUAR
-+ */
-+
-+/*
-+ * 97/05/14 Andreas: Register %a2 is now set to the current task throughout
-+ *		     the whole kernel.
-+ */
-+
-+/* the following macro is used when enabling interrupts */
-+/* portable version */
-+#define ALLOWINT	(~0x700)
-+#define	MAX_NOINT_IPL	0
-+
-+#ifdef __ASSEMBLY__
-+
-+#define curptr a2
-+
-+LFLUSH_I_AND_D = 0x00000808
-+LSIGTRAP = 5
-+
-+/* process bits for task_struct.ptrace */
-+PT_TRACESYS_OFF = 3
-+PT_TRACESYS_BIT = 1
-+PT_PTRACED_OFF = 3
-+PT_PTRACED_BIT = 0
-+PT_DTRACE_OFF = 3
-+PT_DTRACE_BIT = 2
-+
-+#define SAVE_ALL_INT save_all_int
-+#define SAVE_ALL_SYS save_all_sys
-+#define RESTORE_ALL restore_all
-+/*
-+ * This defines the normal kernel pt-regs layout.
-+ *
-+ * regs a3-a6 and d6-d7 are preserved by C code
-+ * the kernel doesn't mess with usp unless it needs to
-+ */
-+
-+/*
-+ * a -1 in the orig_d0 field signifies
-+ * that the stack frame is NOT for syscall
-+ */
-+.macro	save_all_int
-+	movel	MMUSR,%sp@-
-+	movel	MMUAR,%sp@-
-+	clrl	%sp@-		| stk_adj
-+	pea	-1:w		| orig d0
-+	movel	%d0,%sp@-	| d0
-+	subal	#(8*4), %sp
-+	moveml	%d1-%d5/%a0-%a1/%curptr,%sp@
-+.endm
-+
-+.macro	save_all_sys
-+	movel	MMUSR,%sp@-
-+	movel	MMUAR,%sp@-
-+	clrl	%sp@-		| stk_adj
-+	movel	%d0,%sp@-	| orig d0
-+	movel	%d0,%sp@-	| d0
-+	subal	#(8*4), %sp
-+	moveml	%d1-%d5/%a0-%a1/%curptr,%sp@
-+.endm
-+
-+.macro	restore_all
-+	moveml	%sp@,%a0-%a1/%curptr/%d1-%d5
-+	addal	#(8*4), %sp
-+	movel	%sp@+,%d0	| d0
-+	addql	#4,%sp		| orig d0
-+	addl	%sp@+,%sp	| stk_adj
-+	addql	#8,%sp		| MMUAR & MMUSR
-+	rte
-+.endm
-+
-+#define SWITCH_STACK_SIZE (6*4+4)	/* includes return address */
-+
-+#define SAVE_SWITCH_STACK save_switch_stack
-+#define RESTORE_SWITCH_STACK restore_switch_stack
-+#define GET_CURRENT(tmp) get_current tmp
-+
-+.macro	save_switch_stack
-+	subal	#(6*4), %sp
-+	moveml	%a3-%a6/%d6-%d7,%sp@
-+.endm
-+
-+.macro	restore_switch_stack
-+	moveml	%sp@,%a3-%a6/%d6-%d7
-+	addal	#(6*4), %sp
-+.endm
-+
-+.macro	get_current reg=%d0
-+	movel	%sp,\reg
-+	andl	#-THREAD_SIZE,\reg
-+	movel	\reg,%curptr
-+	movel	%curptr@,%curptr
-+.endm
-+
-+#else /* C source */
-+
-+#define STR(X) STR1(X)
-+#define STR1(X) #X
-+
-+#define PT_OFF_ORIG_D0	 0x24
-+#define PT_OFF_FORMATVEC 0x32
-+#define PT_OFF_SR	 0x2C
-+#define SAVE_ALL_INT				\
-+	"clrl	%%sp@-;"    /* stk_adj */	\
-+	"pea	-1:w;"	    /* orig d0 = -1 */	\
-+	"movel	%%d0,%%sp@-;" /* d0 */		\
-+	"subal	#(8*4),%sp"			\
-+	"moveml	%%d1-%%d5/%%a0-%%a2,%%sp@"
-+#define GET_CURRENT(tmp) \
-+	"movel	%%sp,"#tmp"\n\t" \
-+	"andw	#-"STR(THREAD_SIZE)","#tmp"\n\t" \
-+	"movel	"#tmp",%%a2\n\t"
-+
-+#endif
-+
-+#endif /* __CF_M68K_ENTRY_H */
---- /dev/null
-+++ b/include/asm-m68k/cfmmu.h
-@@ -0,0 +1,104 @@
-+/*
-+ * Definitions for Coldfire V4e MMU
-+ */
-+#include <asm/movs.h>
-+
-+#ifndef __CF_MMU_H__
-+#define __CF_MMU_H__
-+
-+
-+#define MMU_BASE 0xE1000000
-+
-+
-+#define MMUCR (MMU_BASE+0x00)
-+#define MMUCR_ASMN  1
-+#define MMUCR_ASM   (1<<MMUCR_ASMN)
-+#define MMUCR_ENN   0
-+#define MMUCR_EN    (1<<MMUCR_ENN)
-+
-+#define MMUOR REG16(MMU_BASE+0x04+0x02)
-+#define MMUOR_AAN   16
-+#define MMUOR_AA    (0xffff<<MMUOR_AAN)
-+#define MMUOR_STLBN 8
-+#define MMUOR_STLB  (1<<MMUOR_STLBN)
-+#define MMUOR_CAN   7
-+#define MMUOR_CA    (1<<MMUOR_CAN)
-+#define MMUOR_CNLN  6
-+#define MMUOR_CNL   (1<<MMUOR_CNLN)
-+#define MMUOR_CASN  5
-+#define MMUOR_CAS   (1<<MMUOR_CASN)
-+#define MMUOR_ITLBN 4
-+#define MMUOR_ITLB  (1<<MMUOR_ITLBN)
-+#define MMUOR_ADRN  3
-+#define MMUOR_ADR   (1<<MMUOR_ADRN)
-+#define MMUOR_RWN   2
-+#define MMUOR_RW    (1<<MMUOR_RWN)
-+#define MMUOR_ACCN  1
-+#define MMUOR_ACC   (1<<MMUOR_ACCN)
-+#define MMUOR_UAAN  0
-+#define MMUOR_UAA   (1<<MMUOR_UAAN)
-+
-+#define MMUSR REG32(MMU_BASE+0x08)
-+#define MMUSR_SPFN  5
-+#define MMUSR_SPF   (1<<MMUSR_SPFN)
-+#define MMUSR_RFN   4
-+#define MMUSR_RF    (1<<MMUSR_RFN)
-+#define MMUSR_WFN   3
-+#define MMUSR_WF    (1<<MMUSR_WFN)
-+#define MMUSR_HITN  1
-+#define MMUSR_HIT   (1<<MMUSR_HITN)
-+
-+#define MMUAR REG32(MMU_BASE+0x10)
-+#define MMUAR_VPN   1
-+#define MMUAR_VP    (0xfffffffe)
-+#define MMUAR_SN    0
-+#define MMUAR_S     (1<<MMUAR_SN)
-+
-+#define MMUTR REG32(MMU_BASE+0x14)
-+#define MMUTR_VAN   10
-+#define MMUTR_VA    (0xfffffc00)
-+#define MMUTR_IDN   2
-+#define MMUTR_ID    (0xff<<MMUTR_IDN)
-+#define MMUTR_SGN   1
-+#define MMUTR_SG    (1<<MMUTR_SGN)
-+#define MMUTR_VN    0
-+#define MMUTR_V     (1<<MMUTR_VN)
-+
-+#define MMUDR REG32(MMU_BASE+0x18)
-+#define MMUDR_PAN   10
-+#define MMUDR_PA    (0xfffffc00)
-+#define MMUDR_SZN   8
-+#define MMUDR_SZ_MASK (0x2<<MMUDR_SZN)
-+#define MMUDR_SZ1M  (0<<MMUDR_SZN)
-+#define MMUDR_SZ4K  (1<<MMUDR_SZN)
-+#define MMUDR_SZ8K  (2<<MMUDR_SZN)
-+#define MMUDR_SZ16M (3<<MMUDR_SZN)
-+#define MMUDR_CMN   6
-+#define MMUDR_INC   (2<<MMUDR_CMN)
-+#define MMUDR_IC    (0<<MMUDR_CMN)
-+#define MMUDR_DWT   (0<<MMUDR_CMN)
-+#define MMUDR_DCB   (1<<MMUDR_CMN)
-+#define MMUDR_DNCP  (2<<MMUDR_CMN)
-+#define MMUDR_DNCIP (3<<MMUDR_CMN)
-+#define MMUDR_SPN   5
-+#define MMUDR_SP    (1<<MMUDR_SPN)
-+#define MMUDR_RN    4
-+#define MMUDR_R     (1<<MMUDR_RN)
-+#define MMUDR_WN    3
-+#define MMUDR_W     (1<<MMUDR_WN)
-+#define MMUDR_XN    2
-+#define MMUDR_X     (1<<MMUDR_XN)
-+#define MMUDR_LKN   1
-+#define MMUDR_LK    (1<<MMUDR_LKN)
-+
-+
-+#ifndef __ASSEMBLY__
-+#define CF_PMEGS_NUM		256
-+#define CF_INVALID_CONTEXT 	255
-+#define CF_PAGE_PGNUM_MASK 	(PAGE_MASK)
-+
-+extern int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb,
-+		       int extension_word);
-+#endif /* __ASSEMBLY__*/
-+
-+#endif	/* !__CF_MMU_H__ */
---- /dev/null
-+++ b/include/asm-m68k/cf_pgalloc.h
-@@ -0,0 +1,103 @@
-+#ifndef M68K_CF_PGALLOC_H
-+#define M68K_CF_PGALLOC_H
-+
-+#include <asm/coldfire.h>
-+#include <asm/page.h>
-+#include <asm/cf_tlbflush.h>
-+#include <asm/cf_cacheflush.h>
-+
-+extern inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-+{
-+	free_page((unsigned long) pte);
-+}
-+
-+extern const char bad_pmd_string[];
-+
-+extern inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
-+	unsigned long address)
-+{
-+	unsigned long page = __get_free_page(GFP_DMA|__GFP_REPEAT);
-+
-+	if (!page)
-+		return NULL;
-+
-+	memset((void *)page, 0, PAGE_SIZE);
-+	return (pte_t *) (page);
-+}
-+
-+extern inline pmd_t *pmd_alloc_kernel(pgd_t *pgd, unsigned long address)
-+{
-+	return (pmd_t *) pgd;
-+}
-+
-+#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); })
-+#define pmd_alloc_one(mm, address)      ({ BUG(); ((pmd_t *)2); })
-+
-+#define pte_alloc_one_fast(mm, addr) pte_alloc_one(mm, addr)
-+
-+#define pmd_populate(mm, pmd, page) (pmd_val(*pmd) = \
-+	(unsigned long)(page_address(page)))
-+
-+#define pmd_populate_kernel(mm, pmd, pte) (pmd_val(*pmd) = (unsigned long)(pte))
-+
-+#define pmd_pgtable(pmd) pmd_page(pmd)
-+
-+static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *page)
-+{
-+	__free_page(page);
-+}
-+
-+#define __pmd_free_tlb(tlb, pmd) do { } while (0)
-+
-+static inline struct page *pte_alloc_one(struct mm_struct *mm,
-+	unsigned long address)
-+{
-+	struct page *page = alloc_pages(GFP_DMA|__GFP_REPEAT, 0);
-+	pte_t *pte;
-+
-+	if (!page)
-+		return NULL;
-+
-+	pte = kmap(page);
-+	if (pte) {
-+		clear_page(pte);
-+		__flush_page_to_ram(pte);
-+		flush_tlb_kernel_page(pte);
-+		nocache_page(pte);
-+	}
-+	kunmap(pte);
-+
-+	return page;
-+}
-+
-+extern inline void pte_free(struct mm_struct *mm, struct page *page)
-+{
-+	__free_page(page);
-+}
-+
-+/*
-+ * In our implementation, each pgd entry contains 1 pmd that is never allocated
-+ * or freed.  pgd_present is always 1, so this should never be called. -NL
-+ */
-+#define pmd_free(mm, pmd) BUG()
-+
-+extern inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-+{
-+	free_page((unsigned long) pgd);
-+}
-+
-+extern inline pgd_t *pgd_alloc(struct mm_struct *mm)
-+{
-+     pgd_t *new_pgd;
-+
-+     new_pgd = (pgd_t *)__get_free_page(GFP_DMA | __GFP_NOWARN);
-+     if (!new_pgd)
-+	     return NULL;
-+     memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE);
-+     memset(new_pgd, 0, PAGE_OFFSET >> PGDIR_SHIFT);
-+     return new_pgd;
-+}
-+
-+#define pgd_populate(mm, pmd, pte) BUG()
-+
-+#endif /* M68K_CF_PGALLOC_H */
---- /dev/null
-+++ b/include/asm-m68k/cf_pgtable.h
-@@ -0,0 +1,357 @@
-+#ifndef _CF_PGTABLE_H
-+#define _CF_PGTABLE_H
-+
-+#include <asm/cfmmu.h>
-+#include <asm/page.h>
-+
-+#ifndef __ASSEMBLY__
-+#include <asm/virtconvert.h>
-+#include <linux/linkage.h>
-+
-+/* For virtual address to physical address conversion */
-+#define VTOP(addr)	__pa(addr)
-+#define PTOV(addr)	__va(addr)
-+
-+
-+#endif	/* !__ASSEMBLY__ */
-+
-+/* Page protection values within PTE. */
-+
-+/* MMUDR bits, in proper place. */
-+#define CF_PAGE_LOCKED      (0x00000002)
-+#define CF_PAGE_EXEC        (0x00000004)
-+#define CF_PAGE_WRITABLE    (0x00000008)
-+#define CF_PAGE_READABLE    (0x00000010)
-+#define CF_PAGE_SYSTEM      (0x00000020)
-+#define CF_PAGE_COPYBACK    (0x00000040)
-+#define CF_PAGE_NOCACHE     (0x00000080)
-+
-+#define CF_CACHEMASK       (~0x00000040)
-+#define CF_PAGE_MMUDR_MASK  (0x000000fe)
-+
-+#define _PAGE_NOCACHE030  (CF_PAGE_NOCACHE)
-+
-+/* MMUTR bits, need shifting down.  */
-+#define CF_PAGE_VALID       (0x00000400)
-+#define CF_PAGE_SHARED      (0x00000800)
-+
-+#define CF_PAGE_MMUTR_MASK  (0x00000c00)
-+#define CF_PAGE_MMUTR_SHIFT (10)
-+#define CF_ASID_MMU_SHIFT   (2)
-+
-+/* Fake bits, not implemented in CF, will get masked out before
-+   hitting hardware, and might go away altogether once this port is
-+   complete.  */
-+#if PAGE_SHIFT < 13
-+#error COLDFIRE Error: Pages must be at least 8k in size
-+#endif
-+#define CF_PAGE_ACCESSED    (0x00001000)
-+#define CF_PAGE_FILE        (0x00000200)
-+#define CF_PAGE_DIRTY       (0x00000001)
-+
-+#define _PAGE_CACHE040	0x020   /* 68040 cache mode, cachable, copyback */
-+#define _PAGE_NOCACHE_S 0x040   /* 68040 no-cache mode, serialized */
-+#define _PAGE_NOCACHE   0x060   /* 68040 cache mode, non-serialized */
-+#define _PAGE_CACHE040W 0x000   /* 68040 cache mode, cachable, write-through */
-+#define _DESCTYPE_MASK  0x003
-+#define _CACHEMASK040   (~0x060)
-+#define _PAGE_GLOBAL040 0x400   /* 68040 global bit, used for kva descs */
-+
-+
-+/* Externally used page protection values. */
-+#define _PAGE_PRESENT	(CF_PAGE_VALID)
-+#define _PAGE_ACCESSED	(CF_PAGE_ACCESSED)
-+#define _PAGE_DIRTY	(CF_PAGE_DIRTY)
-+#define _PAGE_READWRITE (CF_PAGE_WRITABLE \
-+			| CF_PAGE_READABLE \
-+			| CF_PAGE_SYSTEM \
-+			| CF_PAGE_SHARED)
-+
-+/* Compound page protection values. */
-+#define PAGE_NONE	__pgprot(CF_PAGE_VALID \
-+				 | CF_PAGE_ACCESSED)
-+
-+#define PAGE_SHARED     __pgprot(CF_PAGE_VALID \
-+				 | CF_PAGE_ACCESSED \
-+				 | CF_PAGE_SHARED)
-+
-+#define PAGE_INIT	__pgprot(CF_PAGE_VALID \
-+				 | CF_PAGE_WRITABLE \
-+				 | CF_PAGE_READABLE \
-+				 | CF_PAGE_EXEC \
-+				 | CF_PAGE_SYSTEM \
-+				 | CF_PAGE_SHARED)
-+
-+#define PAGE_KERNEL	__pgprot(CF_PAGE_VALID \
-+				 | CF_PAGE_WRITABLE \
-+				 | CF_PAGE_READABLE \
-+				 | CF_PAGE_EXEC \
-+				 | CF_PAGE_SYSTEM \
-+				 | CF_PAGE_SHARED \
-+				 | CF_PAGE_ACCESSED)
-+
-+#define PAGE_COPY	__pgprot(CF_PAGE_VALID \
-+				 | CF_PAGE_ACCESSED \
-+				 | CF_PAGE_READABLE \
-+				 | CF_PAGE_DIRTY)
-+/*
-+ * Page protections for initialising protection_map.  See mm/mmap.c
-+ * for use.  In general, the bit positions are xwr, and P-items are
-+ * private, the S-items are shared.
-+ */
-+
-+#define __P000	PAGE_NONE
-+#define __P100	__pgprot(CF_PAGE_VALID \
-+			 | CF_PAGE_ACCESSED \
-+			 | CF_PAGE_EXEC)
-+#define __P010	__pgprot(CF_PAGE_VALID \
-+			 | CF_PAGE_WRITABLE \
-+			 | CF_PAGE_ACCESSED)
-+#define __P110	__pgprot(CF_PAGE_VALID \
-+			 | CF_PAGE_ACCESSED \
-+			 | CF_PAGE_WRITABLE \
-+			 | CF_PAGE_EXEC)
-+#define __P001	__pgprot(CF_PAGE_VALID \
-+			 | CF_PAGE_ACCESSED \
-+			 | CF_PAGE_READABLE)
-+#define __P101	__pgprot(CF_PAGE_VALID \
-+			 | CF_PAGE_ACCESSED \
-+			 | CF_PAGE_READABLE \
-+			 | CF_PAGE_EXEC)
-+#define __P011	__pgprot(CF_PAGE_VALID \
-+			 | CF_PAGE_READABLE \
-+			 | CF_PAGE_WRITABLE \
-+			 | CF_PAGE_ACCESSED)
-+#define __P111	__pgprot(CF_PAGE_VALID \
-+			 | CF_PAGE_ACCESSED \
-+			 | CF_PAGE_WRITABLE \
-+			 | CF_PAGE_READABLE \
-+			 | CF_PAGE_EXEC)
-+
-+#define __S000	PAGE_NONE
-+#define __S100	__pgprot(CF_PAGE_VALID \
-+			 | CF_PAGE_ACCESSED \
-+			 | CF_PAGE_SHARED \
-+			 | CF_PAGE_EXEC)
-+#define __S010	PAGE_SHARED
-+#define __S110	__pgprot(CF_PAGE_VALID \
-+			 | CF_PAGE_ACCESSED \
-+			 | CF_PAGE_SHARED \
-+			 | CF_PAGE_EXEC)
-+#define __S001	__pgprot(CF_PAGE_VALID \
-+			 | CF_PAGE_ACCESSED \
-+			 | CF_PAGE_SHARED \
-+			 | CF_PAGE_READABLE)
-+#define __S101	__pgprot(CF_PAGE_VALID \
-+			 | CF_PAGE_ACCESSED \
-+			 | CF_PAGE_SHARED \
-+			 | CF_PAGE_READABLE \
-+			 | CF_PAGE_EXEC)
-+#define __S011	__pgprot(CF_PAGE_VALID \
-+			 | CF_PAGE_ACCESSED \
-+			 | CF_PAGE_SHARED \
-+			 | CF_PAGE_READABLE)
-+#define __S111	__pgprot(CF_PAGE_VALID \
-+			 | CF_PAGE_ACCESSED \
-+			 | CF_PAGE_SHARED \
-+			 | CF_PAGE_READABLE \
-+			 | CF_PAGE_EXEC)
-+
-+#define PTE_MASK	PAGE_MASK
-+#define CF_PAGE_CHG_MASK	(PTE_MASK | CF_PAGE_ACCESSED | CF_PAGE_DIRTY)
-+
-+#ifndef __ASSEMBLY__
-+
-+/*
-+ * Conversion functions: convert a page and protection to a page entry,
-+ * and a page entry and page directory to the page they refer to.
-+ */
-+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-+
-+extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-+{
-+	pte_val(pte) = (pte_val(pte) & CF_PAGE_CHG_MASK) | pgprot_val(newprot);
-+	return pte;
-+}
-+
-+#define pmd_set(pmdp, ptep) do {} while (0)
-+
-+extern inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
-+{
-+	pgd_val(*pgdp) = virt_to_phys(pmdp);
-+}
-+
-+#define __pte_page(pte) \
-+	((unsigned long) ((pte_val(pte) & CF_PAGE_PGNUM_MASK) + PAGE_OFFSET))
-+#define __pmd_page(pmd) ((unsigned long) (pmd_val(pmd)))
-+
-+extern inline int pte_none(pte_t pte)
-+{
-+	return !pte_val(pte);
-+}
-+extern inline int pte_present(pte_t pte)
-+{
-+	return pte_val(pte) & CF_PAGE_VALID;
-+}
-+extern inline void pte_clear(struct mm_struct *mm, unsigned long addr,
-+	pte_t *ptep)
-+{
-+	pte_val(*ptep) = 0;
-+}
-+
-+#define pte_pagenr(pte)		((__pte_page(pte) - PAGE_OFFSET) >> PAGE_SHIFT)
-+#define pte_page(pte)		virt_to_page(__pte_page(pte))
-+
-+extern inline int pmd_none2(pmd_t *pmd) { return !pmd_val(*pmd); }
-+#define pmd_none(pmd) pmd_none2(&(pmd))
-+extern inline int pmd_bad2(pmd_t *pmd) { return 0; }
-+#define pmd_bad(pmd) pmd_bad2(&(pmd))
-+#define pmd_present(pmd) (!pmd_none2(&(pmd)))
-+extern inline void pmd_clear(pmd_t *pmdp) { pmd_val(*pmdp) = 0; }
-+
-+extern inline int pgd_none(pgd_t pgd) { return 0; }
-+extern inline int pgd_bad(pgd_t pgd) { return 0; }
-+extern inline int pgd_present(pgd_t pgd) { return 1; }
-+extern inline void pgd_clear(pgd_t *pgdp) {}
-+
-+
-+#define pte_ERROR(e) \
-+	printk(KERN_ERR "%s:%d: bad pte %08lx.\n",	\
-+	__FILE__, __LINE__, pte_val(e))
-+#define pmd_ERROR(e) \
-+	printk(KERN_ERR "%s:%d: bad pmd %08lx.\n",	\
-+	__FILE__, __LINE__, pmd_val(e))
-+#define pgd_ERROR(e) \
-+	printk(KERN_ERR "%s:%d: bad pgd %08lx.\n",	\
-+	__FILE__, __LINE__, pgd_val(e))
-+
-+
-+/*
-+ * The following only work if pte_present() is true.
-+ * Undefined behaviour if not...
-+ * [we have the full set here even if they don't change from m68k]
-+ */
-+extern inline int pte_read(pte_t pte)	\
-+	{ return pte_val(pte) & CF_PAGE_READABLE; }
-+extern inline int pte_write(pte_t pte)	\
-+	{ return pte_val(pte) & CF_PAGE_WRITABLE; }
-+extern inline int pte_exec(pte_t pte)	\
-+	{ return pte_val(pte) & CF_PAGE_EXEC; }
-+extern inline int pte_dirty(pte_t pte)	\
-+	{ return pte_val(pte) & CF_PAGE_DIRTY; }
-+extern inline int pte_young(pte_t pte)	\
-+	{ return pte_val(pte) & CF_PAGE_ACCESSED; }
-+extern inline int pte_file(pte_t pte)	\
-+	{ return pte_val(pte) & CF_PAGE_FILE; }
-+
-+extern inline pte_t pte_wrprotect(pte_t pte)	\
-+	{ pte_val(pte) &= ~CF_PAGE_WRITABLE; return pte; }
-+extern inline pte_t pte_rdprotect(pte_t pte)	\
-+	{ pte_val(pte) &= ~CF_PAGE_READABLE; return pte; }
-+extern inline pte_t pte_exprotect(pte_t pte)	\
-+	{ pte_val(pte) &= ~CF_PAGE_EXEC; return pte; }
-+extern inline pte_t pte_mkclean(pte_t pte)	\
-+	{ pte_val(pte) &= ~CF_PAGE_DIRTY; return pte; }
-+extern inline pte_t pte_mkold(pte_t pte)	\
-+	{ pte_val(pte) &= ~CF_PAGE_ACCESSED; return pte; }
-+extern inline pte_t pte_mkwrite(pte_t pte)	\
-+	{ pte_val(pte) |= CF_PAGE_WRITABLE; return pte; }
-+extern inline pte_t pte_mkread(pte_t pte)	\
-+	{ pte_val(pte) |= CF_PAGE_READABLE; return pte; }
-+extern inline pte_t pte_mkexec(pte_t pte)	\
-+	{ pte_val(pte) |= CF_PAGE_EXEC; return pte; }
-+extern inline pte_t pte_mkdirty(pte_t pte)	\
-+	{ pte_val(pte) |= CF_PAGE_DIRTY; return pte; }
-+extern inline pte_t pte_mkyoung(pte_t pte)	\
-+	{ pte_val(pte) |= CF_PAGE_ACCESSED; return pte; }
-+extern inline pte_t pte_mknocache(pte_t pte)	\
-+	{ pte_val(pte) |= 0x80 | (pte_val(pte) & ~0x40); return pte; }
-+extern inline pte_t pte_mkcache(pte_t pte)	\
-+	{ pte_val(pte) &= ~CF_PAGE_NOCACHE; return pte; }
-+
-+#define swapper_pg_dir kernel_pg_dir
-+extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
-+
-+/* Find an entry in a pagetable directory. */
-+#define pgd_index(address)     ((address) >> PGDIR_SHIFT)
-+
-+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
-+
-+/* Find an entry in a kernel pagetable directory. */
-+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-+
-+/* Find an entry in the second-level pagetable. */
-+extern inline pmd_t *pmd_offset(pgd_t *pgd, unsigned long address)
-+{
-+	return (pmd_t *) pgd;
-+}
-+
-+/* Find an entry in the third-level pagetable. */
-+#define __pte_offset(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-+#define pte_offset_kernel(dir, address) ((pte_t *) __pmd_page(*(dir)) + \
-+					  __pte_offset(address))
-+
-+/* Disable caching for page at given kernel virtual address. */
-+static inline void nocache_page(void *vaddr)
-+{
-+	pgd_t *dir;
-+	pmd_t *pmdp;
-+	pte_t *ptep;
-+	unsigned long addr = (unsigned long)vaddr;
-+
-+	dir = pgd_offset_k(addr);
-+	pmdp = pmd_offset(dir, addr);
-+	ptep = pte_offset_kernel(pmdp, addr);
-+	*ptep = pte_mknocache(*ptep);
-+}
-+
-+/* Enable caching for page at given kernel virtual address. */
-+static inline void cache_page(void *vaddr)
-+{
-+	pgd_t *dir;
-+	pmd_t *pmdp;
-+	pte_t *ptep;
-+	unsigned long addr = (unsigned long)vaddr;
-+
-+	dir = pgd_offset_k(addr);
-+	pmdp = pmd_offset(dir, addr);
-+	ptep = pte_offset_kernel(pmdp, addr);
-+	*ptep = pte_mkcache(*ptep);
-+}
-+
-+#define PTE_FILE_MAX_BITS	21
-+#define PTE_FILE_SHIFT		11
-+
-+static inline unsigned long pte_to_pgoff(pte_t pte)
-+{
-+	return pte_val(pte) >> PTE_FILE_SHIFT;
-+}
-+
-+static inline pte_t pgoff_to_pte(unsigned pgoff)
-+{
-+	pte_t pte = __pte((pgoff << PTE_FILE_SHIFT) + CF_PAGE_FILE);
-+	return pte;
-+}
-+
-+/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */
-+#define __swp_entry(type, offset) ((swp_entry_t) { (type) |	\
-+				   (offset << PTE_FILE_SHIFT) })
-+#define __swp_type(x)		((x).val & 0xFF)
-+#define __swp_offset(x)		((x).val >> PTE_FILE_SHIFT)
-+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-+#define __swp_entry_to_pte(x)	(__pte((x).val))
-+
-+#define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
-+
-+#define pte_offset_map(pmdp, address) ((pte_t *)__pmd_page(*pmdp) +	\
-+				       __pte_offset(address))
-+#define pte_offset_map_nested(pmdp, address) pte_offset_map(pmdp, address)
-+#define pte_unmap(pte) kunmap(pte)
-+#define pte_unmap_nested(pte) kunmap(pte)
-+
-+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
-+
-+
-+#endif	/* !__ASSEMBLY__ */
-+#endif	/* !_CF_PGTABLE_H */
---- /dev/null
-+++ b/include/asm-m68k/cf_tlbflush.h
-@@ -0,0 +1,59 @@
-+#ifndef M68K_CF_TLBFLUSH_H
-+#define M68K_CF_TLBFLUSH_H
-+
-+#include <asm/coldfire.h>
-+
-+/* Flush all userspace mappings.  */
-+static inline void flush_tlb_all(void)
-+{
-+	preempt_disable();
-+	*MMUOR = MMUOR_CNL;
-+	preempt_enable();
-+}
-+
-+/* Clear user TLB entries within the context named in mm */
-+static inline void flush_tlb_mm(struct mm_struct *mm)
-+{
-+	preempt_disable();
-+	*MMUOR = MMUOR_CNL;
-+	preempt_enable();
-+}
-+
-+/* Flush a single TLB page.  */
-+static inline void flush_tlb_page(struct vm_area_struct *vma,
-+				   unsigned long addr)
-+{
-+	preempt_disable();
-+	*MMUOR = MMUOR_CNL;
-+	preempt_enable();
-+}
-+/* Flush a range of pages from TLB. */
-+
-+static inline void flush_tlb_range(struct mm_struct *mm,
-+		      unsigned long start, unsigned long end)
-+{
-+	preempt_disable();
-+	*MMUOR = MMUOR_CNL;
-+	preempt_enable();
-+}
-+
-+/* Flush kernel page from TLB. */
-+static inline void flush_tlb_kernel_page(void *addr)
-+{
-+	preempt_disable();
-+	*MMUOR = MMUOR_CNL;
-+	preempt_enable();
-+}
-+
-+static inline void flush_tlb_kernel_range(unsigned long start,
-+	unsigned long end)
-+{
-+	flush_tlb_all();
-+}
-+
-+extern inline void flush_tlb_pgtables(struct mm_struct *mm,
-+				      unsigned long start, unsigned long end)
-+{
-+}
-+
-+#endif /* M68K_CF_TLBFLUSH_H */
---- /dev/null
-+++ b/include/asm-m68k/cf_uaccess.h
-@@ -0,0 +1,376 @@
-+#ifndef __M68K_CF_UACCESS_H
-+#define __M68K_CF_UACCESS_H
-+
-+/*
-+ * User space memory access functions
-+ */
-+
-+/* The "moves" command is not available in the CF instruction set. */
-+#include <linux/compiler.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/sched.h>
-+#include <asm/segment.h>
-+
-+#define VERIFY_READ	0
-+#define VERIFY_WRITE	1
-+
-+/* We let the MMU do all checking */
-+#define access_ok(type, addr, size) 1
-+
-+/*
-+ * The exception table consists of pairs of addresses: the first is the
-+ * address of an instruction that is allowed to fault, and the second is
-+ * the address at which the program should continue.  No registers are
-+ * modified, so it is entirely up to the continuation code to figure out
-+ * what to do.
-+ *
-+ * All the routines below use bits of fixup code that are out of line
-+ * with the main instruction path.  This means when everything is well,
-+ * we don't even have to jump over them.  Further, they do not intrude
-+ * on our cache or tlb entries.
-+ */
-+
-+struct exception_table_entry
-+{
-+	unsigned long insn, fixup;
-+};
-+
-+extern int __put_user_bad(void);
-+extern int __get_user_bad(void);
-+
-+#define __put_user_asm(res, x, ptr, bwl, reg, err)	\
-+asm volatile ("\n"					\
-+	"1:	move."#bwl"	%2,%1\n"		\
-+	"2:\n"						\
-+	"	.section .fixup,\"ax\"\n"		\
-+	"	.even\n"				\
-+	"10:	moveq.l	%3,%0\n"			\
-+	"	jra 2b\n"				\
-+	"	.previous\n"				\
-+	"\n"						\
-+	"	.section __ex_table,\"a\"\n"		\
-+	"	.align	4\n"				\
-+	"	.long	1b,10b\n"			\
-+	"	.long	2b,10b\n"			\
-+	"	.previous"				\
-+	: "+d" (res), "=m" (*(ptr))			\
-+	: #reg (x), "i" (err))
-+
-+/*
-+ * These are the main single-value transfer routines.  They automatically
-+ * use the right size if we just have the right pointer type.
-+ */
-+
-+#define __put_user(x, ptr)						\
-+({									\
-+	typeof(*(ptr)) __pu_val = (x);					\
-+	int __pu_err = 0;						\
-+	__chk_user_ptr(ptr);						\
-+	switch (sizeof (*(ptr))) {					\
-+	case 1:								\
-+		__put_user_asm(__pu_err, __pu_val, ptr, b, d, -EFAULT);	\
-+		break;							\
-+	case 2:								\
-+		__put_user_asm(__pu_err, __pu_val, ptr, w, d, -EFAULT);	\
-+		break;							\
-+	case 4:								\
-+		__put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT);	\
-+		break;							\
-+	case 8:								\
-+		{							\
-+		const void __user *__pu_ptr = (ptr);			\
-+		asm volatile ("\n"					\
-+			"1:	move.l	%2,(%1)+\n"			\
-+			"2:	move.l	%R2,(%1)\n"			\
-+			"3:\n"						\
-+			"	.section .fixup,\"ax\"\n"		\
-+			"	.even\n"				\
-+			"10:	movel %3,%0\n"				\
-+			"	jra 3b\n"				\
-+			"	.previous\n"				\
-+			"\n"						\
-+			"	.section __ex_table,\"a\"\n"		\
-+			"	.align 4\n"				\
-+			"	.long 1b,10b\n"				\
-+			"	.long 2b,10b\n"				\
-+			"	.long 3b,10b\n"				\
-+			"	.previous"				\
-+			: "+d" (__pu_err), "+a" (__pu_ptr)		\
-+			: "r" (__pu_val), "i" (-EFAULT)			\
-+			: "memory");					\
-+		break;							\
-+	    }								\
-+	default:							\
-+		__pu_err = __put_user_bad();				\
-+		break;							\
-+	}								\
-+	__pu_err;							\
-+})
-+#define put_user(x, ptr)	__put_user(x, ptr)
-+
-+
-+#define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({	\
-+	type __gu_val;						\
-+	asm volatile ("\n"					\
-+		"1:	move."#bwl"	%2,%1\n"		\
-+		"2:\n"						\
-+		"	.section .fixup,\"ax\"\n"		\
-+		"	.even\n"				\
-+		"10:	move.l	%3,%0\n"			\
-+		"	subl	%1,%1\n"			\
-+		"	jra	2b\n"				\
-+		"	.previous\n"				\
-+		"\n"						\
-+		"	.section __ex_table,\"a\"\n"		\
-+		"	.align	4\n"				\
-+		"	.long	1b,10b\n"			\
-+		"	.previous"				\
-+		: "+d" (res), "=&" #reg (__gu_val)		\
-+		: "m" (*(ptr)), "i" (err));			\
-+	(x) = (typeof(*(ptr)))(unsigned long)__gu_val;		\
-+})
-+
-+#define __get_user(x, ptr)						\
-+({									\
-+	int __gu_err = 0;						\
-+	__chk_user_ptr(ptr);						\
-+	switch (sizeof(*(ptr))) {					\
-+	case 1:								\
-+		__get_user_asm(__gu_err, x, ptr, u8, b, d, -EFAULT);	\
-+		break;							\
-+	case 2:								\
-+		__get_user_asm(__gu_err, x, ptr, u16, w, d, -EFAULT);	\
-+		break;							\
-+	case 4:								\
-+		__get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT);	\
-+		break;							\
-+/*	case 8:	disabled because gcc-4.1 has a broken typeof		\
-+		{							\
-+		const void *__gu_ptr = (ptr);				\
-+		u64 __gu_val;						\
-+		asm volatile ("\n"					\
-+			"1:	move.l	(%2)+,%1\n"			\
-+			"2:	move.l	(%2),%R1\n"			\
-+			"3:\n"						\
-+			"	.section .fixup,\"ax\"\n"		\
-+			"	.even\n"				\
-+			"10:	move.l	%3,%0\n"			\
-+			"	subl	%1,%1\n"			\
-+			"	subl	%R1,%R1\n"			\
-+			"	jra	3b\n"				\
-+			"	.previous\n"				\
-+			"\n"						\
-+			"	.section __ex_table,\"a\"\n"		\
-+			"	.align	4\n"				\
-+			"	.long	1b,10b\n"			\
-+			"	.long	2b,10b\n"			\
-+			"	.previous"				\
-+			: "+d" (__gu_err), "=&r" (__gu_val),		\
-+			  "+a" (__gu_ptr)				\
-+			: "i" (-EFAULT)					\
-+			: "memory");					\
-+		(x) = (typeof(*(ptr)))__gu_val;				\
-+		break;							\
-+	    }	*/							\
-+	default:							\
-+		__gu_err = __get_user_bad();				\
-+		break;							\
-+	}								\
-+	__gu_err;							\
-+})
-+#define get_user(x, ptr) __get_user(x, ptr)
-+
-+unsigned long __generic_copy_from_user(void *to, const void __user *from,
-+	unsigned long n);
-+unsigned long __generic_copy_to_user(void __user *to, const void *from,
-+	unsigned long n);
-+
-+#define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\
-+	asm volatile ("\n"						\
-+		"1:	move."#s1"	(%2)+,%3\n"			\
-+		"	move."#s1"	%3,(%1)+\n"			\
-+		"2:	move."#s2"	(%2)+,%3\n"			\
-+		"	move."#s2"	%3,(%1)+\n"			\
-+		"	.ifnc	\""#s3"\",\"\"\n"			\
-+		"3:	move."#s3"	(%2)+,%3\n"			\
-+		"	move."#s3"	%3,(%1)+\n"			\
-+		"	.endif\n"					\
-+		"4:\n"							\
-+		"	.section __ex_table,\"a\"\n"			\
-+		"	.align	4\n"					\
-+		"	.long	1b,10f\n"				\
-+		"	.long	2b,20f\n"				\
-+		"	.ifnc	\""#s3"\",\"\"\n"			\
-+		"	.long	3b,30f\n"				\
-+		"	.endif\n"					\
-+		"	.previous\n"					\
-+		"\n"							\
-+		"	.section .fixup,\"ax\"\n"			\
-+		"	.even\n"					\
-+		"10:	clr."#s1"	(%1)+\n"			\
-+		"20:	clr."#s2"	(%1)+\n"			\
-+		"	.ifnc	\""#s3"\",\"\"\n"			\
-+		"30:	clr."#s3"	(%1)+\n"			\
-+		"	.endif\n"					\
-+		"	moveq.l	#"#n",%0\n"				\
-+		"	jra	4b\n"					\
-+		"	.previous\n"					\
-+		: "+d" (res), "+&a" (to), "+a" (from), "=&d" (tmp)	\
-+		: : "memory")
-+
-+static __always_inline unsigned long
-+__constant_copy_from_user(void *to, const void __user *from, unsigned long n)
-+{
-+	unsigned long res = 0, tmp;
-+
-+	switch (n) {
-+	case 1:
-+		__get_user_asm(res, *(u8 *)to, (u8 __user *)from, u8, b, d, 1);
-+		break;
-+	case 2:
-+		__get_user_asm(res, *(u16 *)to, (u16 __user *)from, u16, w,
-+			d, 2);
-+		break;
-+	case 3:
-+		__constant_copy_from_user_asm(res, to, from, tmp, 3, w, b,);
-+		break;
-+	case 4:
-+		__get_user_asm(res, *(u32 *)to, (u32 __user *)from, u32, l,
-+			r, 4);
-+		break;
-+	case 5:
-+		__constant_copy_from_user_asm(res, to, from, tmp, 5, l, b,);
-+		break;
-+	case 6:
-+		__constant_copy_from_user_asm(res, to, from, tmp, 6, l, w,);
-+		break;
-+	case 7:
-+		__constant_copy_from_user_asm(res, to, from, tmp, 7, l, w, b);
-+		break;
-+	case 8:
-+		__constant_copy_from_user_asm(res, to, from, tmp, 8, l, l,);
-+		break;
-+	case 9:
-+		__constant_copy_from_user_asm(res, to, from, tmp, 9, l, l, b);
-+		break;
-+	case 10:
-+		__constant_copy_from_user_asm(res, to, from, tmp, 10, l, l, w);
-+		break;
-+	case 12:
-+		__constant_copy_from_user_asm(res, to, from, tmp, 12, l, l, l);
-+		break;
-+	default:
-+		/* we limit the inlined version to 3 moves */
-+		return __generic_copy_from_user(to, from, n);
-+	}
-+
-+	return res;
-+}
-+
-+#define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3)	\
-+	asm volatile ("\n"						\
-+		"	move."#s1"	(%2)+,%3\n"			\
-+		"11:	move."#s1"	%3,(%1)+\n"			\
-+		"12:	move."#s2"	(%2)+,%3\n"			\
-+		"21:	move."#s2"	%3,(%1)+\n"			\
-+		"22:\n"							\
-+		"	.ifnc	\""#s3"\",\"\"\n"			\
-+		"	move."#s3"	(%2)+,%3\n"			\
-+		"31:	move."#s3"	%3,(%1)+\n"			\
-+		"32:\n"							\
-+		"	.endif\n"					\
-+		"4:\n"							\
-+		"\n"							\
-+		"	.section __ex_table,\"a\"\n"			\
-+		"	.align	4\n"					\
-+		"	.long	11b,5f\n"				\
-+		"	.long	12b,5f\n"				\
-+		"	.long	21b,5f\n"				\
-+		"	.long	22b,5f\n"				\
-+		"	.ifnc	\""#s3"\",\"\"\n"			\
-+		"	.long	31b,5f\n"				\
-+		"	.long	32b,5f\n"				\
-+		"	.endif\n"					\
-+		"	.previous\n"					\
-+		"\n"							\
-+		"	.section .fixup,\"ax\"\n"			\
-+		"	.even\n"					\
-+		"5:	moveq.l	#"#n",%0\n"				\
-+		"	jra	4b\n"					\
-+		"	.previous\n"					\
-+		: "+d" (res), "+a" (to), "+a" (from), "=&d" (tmp)	\
-+		: : "memory")
-+
-+static __always_inline unsigned long
-+__constant_copy_to_user(void __user *to, const void *from, unsigned long n)
-+{
-+	unsigned long res = 0, tmp;
-+
-+	switch (n) {
-+	case 1:
-+		__put_user_asm(res, *(u8 *)from, (u8 __user *)to, b, d, 1);
-+		break;
-+	case 2:
-+		__put_user_asm(res, *(u16 *)from, (u16 __user *)to, w, d, 2);
-+		break;
-+	case 3:
-+		__constant_copy_to_user_asm(res, to, from, tmp, 3, w, b,);
-+		break;
-+	case 4:
-+		__put_user_asm(res, *(u32 *)from, (u32 __user *)to, l, r, 4);
-+		break;
-+	case 5:
-+		__constant_copy_to_user_asm(res, to, from, tmp, 5, l, b,);
-+		break;
-+	case 6:
-+		__constant_copy_to_user_asm(res, to, from, tmp, 6, l, w,);
-+		break;
-+	case 7:
-+		__constant_copy_to_user_asm(res, to, from, tmp, 7, l, w, b);
-+		break;
-+	case 8:
-+		__constant_copy_to_user_asm(res, to, from, tmp, 8, l, l,);
-+		break;
-+	case 9:
-+		__constant_copy_to_user_asm(res, to, from, tmp, 9, l, l, b);
-+		break;
-+	case 10:
-+		__constant_copy_to_user_asm(res, to, from, tmp, 10, l, l, w);
-+		break;
-+	case 12:
-+		__constant_copy_to_user_asm(res, to, from, tmp, 12, l, l, l);
-+		break;
-+	default:
-+		/* limit the inlined version to 3 moves */
-+		return __generic_copy_to_user(to, from, n);
-+	}
-+
-+	return res;
-+}
-+
-+#define __copy_from_user(to, from, n)		\
-+(__builtin_constant_p(n) ?			\
-+ __constant_copy_from_user(to, from, n) :	\
-+ __generic_copy_from_user(to, from, n))
-+
-+#define __copy_to_user(to, from, n)		\
-+(__builtin_constant_p(n) ?			\
-+ __constant_copy_to_user(to, from, n) :		\
-+ __generic_copy_to_user(to, from, n))
-+
-+#define __copy_to_user_inatomic		__copy_to_user
-+#define __copy_from_user_inatomic	__copy_from_user
-+
-+#define copy_from_user(to, from, n)	__copy_from_user(to, from, n)
-+#define copy_to_user(to, from, n)	__copy_to_user(to, from, n)
-+
-+long strncpy_from_user(char *dst, const char __user *src, long count);
-+long strnlen_user(const char __user *src, long n);
-+unsigned long __clear_user(void __user *to, unsigned long n);
-+
-+#define clear_user __clear_user
-+
-+#define strlen_user(str) strnlen_user(str, 32767)
-+
-+#endif /* _M68K_CF_UACCESS_H */
---- a/include/asm-m68k/checksum.h
-+++ b/include/asm-m68k/checksum.h
-@@ -34,6 +34,7 @@ extern __wsum csum_partial_copy_nocheck(
- 					      void *dst, int len,
- 					      __wsum sum);
- 
-+#ifndef CONFIG_COLDFIRE  /* CF has own copy in arch/m68k/lib/checksum.c */
- /*
-  *	This is a version of ip_compute_csum() optimized for IP headers,
-  *	which always checksum on 4 octet boundaries.
-@@ -59,6 +60,9 @@ static inline __sum16 ip_fast_csum(const
- 		 : "memory");
- 	return (__force __sum16)~sum;
- }
-+#else
-+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-+#endif
- 
- /*
-  *	Fold a partial checksum
-@@ -67,6 +71,11 @@ static inline __sum16 ip_fast_csum(const
- static inline __sum16 csum_fold(__wsum sum)
- {
- 	unsigned int tmp = (__force u32)sum;
-+#ifdef CONFIG_COLDFIRE
-+	tmp = (tmp & 0xffff) + (tmp >> 16);
-+	tmp = (tmp & 0xffff) + (tmp >> 16);
-+	return (__force __sum16) ~tmp;
-+#else
- 	__asm__("swap %1\n\t"
- 		"addw %1, %0\n\t"
- 		"clrw %1\n\t"
-@@ -74,6 +83,7 @@ static inline __sum16 csum_fold(__wsum s
- 		: "=&d" (sum), "=&d" (tmp)
- 		: "0" (sum), "1" (tmp));
- 	return (__force __sum16)~sum;
-+#endif
- }
- 
- 
---- /dev/null
-+++ b/include/asm-m68k/coldfire_edma.h
-@@ -0,0 +1,125 @@
-+/*
-+ * coldfire_edma.h - eDMA driver for Coldfire MCF5445x
-+ *
-+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef _LINUX_COLDFIRE_DMA_H
-+#define _LINUX_COLDFIRE_DMA_H
-+
-+#include <linux/interrupt.h>
-+#include <asm/mcf5445x_edma.h>
-+
-+#define EDMA_DRIVER_NAME "ColdFire-eDMA"
-+#define DMA_DEV_MINOR 1
-+
-+#ifdef CONFIG_M5445X
-+#define EDMA_INT_CHANNEL_BASE 		8
-+#define EDMA_INT_CONTROLLER_BASE 	64
-+#define EDMA_INT_BASE			(EDMA_INT_CHANNEL_BASE + \
-+					 EDMA_INT_CONTROLLER_BASE)
-+#define EDMA_CHANNELS			16
-+#define EDMA_INT_ERR			16	/* edma error interrupt */
-+#endif /* CONFIG_M5445X */
-+ 
-+typedef irqreturn_t (*edma_irq_handler)(int, void *);
-+typedef void (*edma_error_handler)(int, void *);
-+ 
-+/* Setup transfer control descriptor (TCD)
-+ *   channel - descriptor number
-+ *   source  - source address
-+ *   dest    - destination address
-+ *   attr    - attributes
-+ *   soff    - source offset
-+ *   nbytes  - number of bytes to be transfered in minor loop
-+ *   slast   - last source address adjustment
-+ *   citer   - major loop count
-+ *   biter   - begining minor loop count
-+ *   doff    - destination offset
-+ *   dlast_sga - last destination address adjustment
-+ *   major_int - generate interrupt after each major loop
-+ *   disable_req - disable DMA request after major loop
-+ */
-+void set_edma_params(int channel, u32 source, u32 dest,
-+		u32 attr, u32 soff, u32 nbytes, u32 slast,
-+		u32 citer, u32 biter, u32 doff, u32 dlast_sga,
-+		int major_int, int disable_req);
-+
-+/* Starts eDMA transfer on specified channel
-+ *   channel - eDMA TCD number
-+ */
-+static inline void  start_edma_transfer(int channel)
-+{
-+	MCF_EDMA_SERQ = channel;
-+	MCF_EDMA_SSRT = channel;
-+}
-+
-+/* Stops eDMA transfer
-+ *   channel - eDMA TCD number
-+ */
-+static inline void stop_edma_transfer(int channel)
-+{
-+	MCF_EDMA_CINT = channel;
-+	MCF_EDMA_CERQ = channel;
-+}
-+
-+
-+/* Confirm that interrupt has been handled
-+ *   channel - eDMA TCD number
-+ */
-+static inline void confirm_edma_interrupt_handled(int channel)
-+{
-+	MCF_EDMA_CINT = channel;
-+}
-+ 
-+/* Initialize eDMA controller */
-+void init_edma(void);
-+ 
-+/* Request eDMA channel:
-+ *   channel - eDMA TCD number
-+ *   handler - channel IRQ callback
-+ *   error_handler - error interrupt handler callback for channel
-+ *   dev - device
-+ *   lock - spinlock to be locked (can be NULL)
-+ *   device_id - device driver name for proc file system output
-+ */
-+int request_edma_channel(int channel,
-+		edma_irq_handler handler,
-+		edma_error_handler error_handler,
-+		void *dev,
-+		spinlock_t *lock,
-+		const char *device_id);
-+
-+/**
-+ * set_edma_callback - Update the channel callback/arg
-+ * @channel: channel number
-+ * @handler: dma handler
-+ * @error_handler: dma error handler
-+ * @arg: argument to pass back
-+ *
-+ * Returns 0 if success or a negative value if failure
-+ */
-+int set_edma_callback(int channel,
-+		edma_irq_handler handler,
-+		edma_error_handler error_handler,
-+		void *arg);
-+  
-+/* Free eDMA channel
-+ *  channel - eDMA TCD number
-+ *  dev - device
-+ */
-+int free_edma_channel(int channel, void *dev);
-+
-+/*
-+ * DMA Modes
-+ */
-+#define	DMA_MODE_READ		0
-+#define DMA_MODE_WRITE		1
-+#endif
---- /dev/null
-+++ b/include/asm-m68k/coldfire.h
-@@ -0,0 +1,51 @@
-+#ifndef _COLDFIRE_H_
-+#define _COLDFIRE_H_
-+
-+#if defined(CONFIG_M5445X)
-+#define MCF_MBAR	0x0
-+/*
-+ * Even though RAMBAR1 should be in the 0x8xxxxxxx range there
-+ * is a problem that needs to be resolved.  Currently head.S
-+ * disables SRAM/RAMBAR1.
-+ */
-+#define MCF_RAMBAR1 	0x40000000
-+#define MCF_SRAM	0x40000000
-+#elif defined(CONFIG_M547X_8X)
-+#define MCF_MBAR	0xF0000000
-+#define MCF_MMUBAR	0xF1000000
-+#define MCF_RAMBAR0	0xF3000000
-+#define MCF_RAMBAR1	0xF3001000
-+#endif
-+
-+#define MCF_CLK     	CONFIG_MCFCLK
-+#define MCF_BUSCLK	(CONFIG_MCFCLK/2)
-+
-+#ifdef __ASSEMBLY__
-+#define REG32
-+#define REG16
-+#define REG08
-+#else  /* __ASSEMBLY__ */
-+#define REG32(x) ((volatile unsigned long  *)(x))
-+#define REG16(x) ((volatile unsigned short *)(x))
-+#define REG08(x) ((volatile unsigned char  *)(x))
-+
-+#define MCF_REG32(x) *(volatile unsigned long  *)(MCF_MBAR+(x))
-+#define MCF_REG16(x) *(volatile unsigned short *)(MCF_MBAR+(x))
-+#define MCF_REG08(x) *(volatile unsigned char  *)(MCF_MBAR+(x))
-+
-+void cacr_set(unsigned long);
-+unsigned long cacr_get(void);
-+
-+#define coldfire_enable_irq0(irq)	MCF_INTC0_CIMR = (irq);
-+
-+#define coldfire_enable_irq1(irq)	MCF_INTC1_CIMR = (irq);
-+
-+#define coldfire_disable_irq0(irq)	MCF_INTC0_SIMR = (irq);
-+
-+#define coldfire_disable_irq1(irq)	MCF_INTC1_SIMR = (irq);
-+
-+#define getiprh()			MCF_INTC0_IPRH
-+
-+#endif /* __ASSEMBLY__ */
-+
-+#endif  /* _COLDFIRE_H_  */
---- a/include/asm-m68k/delay.h
-+++ b/include/asm-m68k/delay.h
-@@ -11,8 +11,25 @@
- 
- static inline void __delay(unsigned long loops)
- {
-+#if defined(CONFIG_COLDFIRE)
-+	/* The coldfire runs this loop at significantly different speeds
-+	 * depending upon long word alignment or not.  We'll pad it to
-+	 * long word alignment which is the faster version.
-+	 * The 0x4a8e is of course a 'tstl %fp' instruction.  This is better
-+	 * than using a NOP (0x4e71) instruction because it executes in one
-+	 * cycle not three and doesn't allow for an arbitary delay waiting
-+	 * for bus cycles to finish.  Also fp/a6 isn't likely to cause a
-+	 * stall waiting for the register to become valid if such is added
-+	 * to the coldfire at some stage.
-+	 */
-+	__asm__ __volatile__ (".balignw 4, 0x4a8e\n\t"
-+			      "1: subql #1, %0\n\t"
-+			      "jcc 1b"
-+			      : "=d" (loops) : "0" (loops));
-+#else
- 	__asm__ __volatile__ ("1: subql #1,%0; jcc 1b"
- 		: "=d" (loops) : "0" (loops));
-+#endif
- }
- 
- extern void __bad_udelay(void);
-@@ -26,12 +43,17 @@ extern void __bad_udelay(void);
-  */
- static inline void __const_udelay(unsigned long xloops)
- {
-+#if defined(CONFIG_COLDFIRE)
-+
-+	__delay(((((unsigned long long) xloops * loops_per_jiffy))>>32)*HZ);
-+#else
- 	unsigned long tmp;
- 
- 	__asm__ ("mulul %2,%0:%1"
- 		: "=d" (xloops), "=d" (tmp)
- 		: "d" (xloops), "1" (loops_per_jiffy));
- 	__delay(xloops * HZ);
-+#endif
- }
- 
- static inline void __udelay(unsigned long usecs)
-@@ -46,12 +68,16 @@ static inline void __udelay(unsigned lon
- static inline unsigned long muldiv(unsigned long a, unsigned long b,
- 				   unsigned long c)
- {
-+#if defined(CONFIG_COLDFIRE)
-+	return (long)(((unsigned long long)a * b)/c);
-+#else
- 	unsigned long tmp;
- 
- 	__asm__ ("mulul %2,%0:%1; divul %3,%0:%1"
- 		: "=d" (tmp), "=d" (a)
- 		: "d" (b), "d" (c), "1" (a));
- 	return a;
-+#endif
- }
- 
- #endif /* defined(_M68K_DELAY_H) */
---- a/include/asm-m68k/div64.h
-+++ b/include/asm-m68k/div64.h
-@@ -5,6 +5,7 @@
- 
- /* n = n / base; return rem; */
- 
-+#ifndef CONFIG_COLDFIRE
- #define do_div(n, base) ({					\
- 	union {							\
- 		unsigned long n32[2];				\
-@@ -24,6 +25,9 @@
- 	(n) = __n.n64;						\
- 	__rem;							\
- })
-+#else
-+#  include <asm-generic/div64.h>
-+#endif
- 
- extern uint64_t div64_64(uint64_t dividend, uint64_t divisor);
- #endif /* _M68K_DIV64_H */
---- a/include/asm-m68k/dma.h
-+++ b/include/asm-m68k/dma.h
-@@ -1,16 +1,120 @@
- #ifndef _M68K_DMA_H
- #define _M68K_DMA_H 1
- 
--
- /* it's useless on the m68k, but unfortunately needed by the new
-    bootmem allocator (but this should do it for this) */
- #define MAX_DMA_ADDRESS PAGE_OFFSET
- 
-+#ifndef CONFIG_COLDFIRE
- #define MAX_DMA_CHANNELS 8
- 
- extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
- extern void free_dma(unsigned int dmanr);	/* release it again */
- 
-+#else /* not (defined(CONFIG_MCF5474) || defined(CONFIG_MCF5484) || defined(CONFIG_MCF5475) || defined(CONFIG_MCF5485)) */
-+
-+/************************************************
-+ * 	Multichannel DMA definitions		*
-+ ************************************************/
-+#ifdef CONFIG_MCD_DMA
-+#include <asm/MCD_dma.h>
-+#include <asm/m5485dma.h>
-+
-+struct scatterlist;
-+
-+#define MAX_DMA_CHANNELS NCHANNELS
-+/*
-+ *  identifiers for each initiator/requestor
-+ */
-+#define DMA_ALWAYS      (0)
-+#define DMA_DSPI_RX     (1)
-+#define DMA_DSPI_TX     (2)
-+#define DMA_DREQ0       (3)
-+#define DMA_PSC0_RX     (4)
-+#define DMA_PSC0_TX     (5)
-+#define DMA_USBEP0      (6)
-+#define DMA_USBEP1      (7)
-+#define DMA_USBEP2      (8)
-+#define DMA_USBEP3      (9)
-+#define DMA_PCI_TX      (10)
-+#define DMA_PCI_RX      (11)
-+#define DMA_PSC1_RX     (12)
-+#define DMA_PSC1_TX     (13)
-+#define DMA_I2C_RX      (14)
-+#define DMA_I2C_TX      (15)
-+#define DMA_FEC0_RX     (16)
-+#define DMA_FEC0_TX     (17)
-+#define DMA_FEC1_RX     (18)
-+#define DMA_FEC1_TX     (19)
-+#define DMA_DREQ1       (20)
-+#define DMA_CTM0        (21)
-+#define DMA_CTM1        (22)
-+#define DMA_CTM2        (23)
-+#define DMA_CTM3        (24)
-+#define DMA_CTM4        (25)
-+#define DMA_CTM5        (26)
-+#define DMA_CTM6        (27)
-+#define DMA_CTM7        (28)
-+#define DMA_USBEP4      (29)
-+#define DMA_USBEP5      (30)
-+#define DMA_USBEP6      (31)
-+#define DMA_PSC2_RX     (32)
-+#define DMA_PSC2_TX     (33)
-+#define DMA_PSC3_RX     (34)
-+#define DMA_PSC3_TX     (35)
-+#define DMA_FEC_RX(x)   ((x == 0) ? DMA_FEC0_RX : DMA_FEC1_RX)
-+#define DMA_FEC_TX(x)   ((x == 0) ? DMA_FEC0_TX : DMA_FEC1_TX)
-+
-+int  dma_set_initiator(int);
-+unsigned int dma_get_initiator(int);
-+void dma_remove_initiator(int);
-+int dma_set_channel(int);
-+int dma_get_channel(int);
-+void dma_remove_channel(int);
-+int dma_set_channel_fec(int requestor);
-+int dma_connect(int channel, int address);
-+int dma_disconnect(int channel);
-+void dma_remove_channel_by_number(int channel);
-+int dma_init(void);
-+
-+#endif /* CONFIG_MCD_DMA */
-+
-+extern spinlock_t dma_spin_lock;
-+
-+static __inline__ unsigned long claim_dma_lock(void)
-+{
-+	unsigned long flags;
-+	spin_lock_irqsave(&dma_spin_lock, flags);
-+	return flags;
-+}
-+
-+static __inline__ void release_dma_lock(unsigned long flags)
-+{
-+	spin_unlock_irqrestore(&dma_spin_lock, flags);
-+}
-+
-+
-+/*
-+ *  Linux standard DMA stuff
-+ */
-+#if 0
-+int  request_dma(unsigned int channel, const char * device_id);
-+void free_dma(unsigned int channel);
-+void enable_dma(unsigned int channel);
-+void disable_dma(unsigned int channel);
-+int  dma_channel_active(unsigned int channel);
-+void set_dma_sg(unsigned int channel, struct scatterlist *sg, int nr_sg);
-+void set_dma_page(unsigned int channel, char pagenr);
-+void set_dma_addr(unsigned int channel, unsigned long physaddr);
-+void set_dma_count(unsigned int channel, unsigned long count);
-+void set_dma_mode(unsigned int channel, unsigned int mode);
-+void set_dma_speed(unsigned int channel, int cycle_ns);
-+int  get_dma_residue(unsigned int channel);
-+#endif
-+#define clear_dma_ff(channel)
-+
-+#endif /* not (defined(CONFIG_MCF5474) || defined(CONFIG_MCF5484) || defined(CONFIG_MCF5475) || defined(CONFIG_MCF5485)) */
-+
- #ifdef CONFIG_PCI
- extern int isa_dma_bridge_buggy;
- #else
---- a/include/asm-m68k/elf.h
-+++ b/include/asm-m68k/elf.h
-@@ -34,6 +34,26 @@
- #define R_68K_GLOB_DAT	20
- #define R_68K_JMP_SLOT	21
- #define R_68K_RELATIVE	22
-+/* TLS static relocations */
-+#define	R_68K_TLS_GD32		25
-+#define	R_68K_TLS_GD16		26
-+#define	R_68K_TLS_GD8		27
-+#define	R_68K_TLS_LDM32		28
-+#define	R_68K_TLS_LDM16		29
-+#define	R_68K_TLS_LDM8		30
-+#define	R_68K_TLS_LDO32		31
-+#define	R_68K_TLS_LDO16		32
-+#define	R_68K_TLS_LDO8		33
-+#define	R_68K_TLS_IE32		34
-+#define	R_68K_TLS_IE16		35
-+#define	R_68K_TLS_IE8		36
-+#define	R_68K_TLS_LE32		37
-+#define	R_68K_TLS_LE16		38
-+#define	R_68K_TLS_LE8		39
-+/* TLS dynamic relocations */
-+#define	R_68K_TLS_DTPMOD32	40
-+#define	R_68K_TLS_DTPREL32	41
-+#define	R_68K_TLS_TPREL32	42
- 
- typedef unsigned long elf_greg_t;
- 
-@@ -60,7 +80,7 @@ typedef struct user_m68kfp_struct elf_fp
- #define ELF_PLAT_INIT(_r, load_addr)	_r->a1 = 0
- 
- #define USE_ELF_CORE_DUMP
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
- #define ELF_EXEC_PAGESIZE	4096
- #else
- #define ELF_EXEC_PAGESIZE	8192
-@@ -116,4 +136,35 @@ typedef struct user_m68kfp_struct elf_fp
- 
- #define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
- 
-+/*
-+ * VDSO
-+ */
-+#ifdef CONFIG_VSYSCALL
-+extern unsigned int vdso_enabled;
-+
-+#define	VDSO_BASE		((unsigned long)current->mm->context.vdso)
-+#define	VDSO_SYM(x)		(VDSO_BASE + (unsigned long)(x))
-+
-+#define	VSYSCALL_AUX_ENT					\
-+	if (vdso_enabled)					\
-+		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);
-+
-+/* additional pages */
-+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES	1
-+
-+struct linux_binprm;
-+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
-+				       int executable_stack);
-+
-+#else
-+/* no VSYSCALL_AUX_ENT */
-+#define	VSYSCALL_AUX_ENT
-+#endif
-+
-+#define ARCH_DLINFO						\
-+do {								\
-+	/* vsyscall entry */					\
-+	VSYSCALL_AUX_ENT;					\
-+} while (0);
-+
- #endif
---- a/include/asm-m68k/fpu.h
-+++ b/include/asm-m68k/fpu.h
-@@ -12,6 +12,8 @@
- #define FPSTATESIZE (96/sizeof(unsigned char))
- #elif defined(CONFIG_M68KFPU_EMU)
- #define FPSTATESIZE (28/sizeof(unsigned char))
-+#elif defined(CONFIG_CFV4E)
-+#define FPSTATESIZE (16/sizeof(unsigned char))
- #elif defined(CONFIG_M68060)
- #define FPSTATESIZE (12/sizeof(unsigned char))
- #else
---- a/include/asm-m68k/io.h
-+++ b/include/asm-m68k/io.h
-@@ -204,6 +204,12 @@ static inline u16 __iomem *isa_mtw(unsig
- #define isa_outw(val,port) (ISA_SEX ? out_be16(isa_itw(port),(val)) : out_le16(isa_itw(port),(val)))
- #define isa_outl(val,port) (ISA_SEX ? out_be32(isa_itl(port),(val)) : out_le32(isa_itl(port),(val)))
- 
-+#ifndef CONFIG_COLDFIRE
-+#define isa_readb(p)       in_8(isa_mtb(p))
-+#define isa_readw(p)       (ISA_SEX ? in_be16(isa_mtw(p)) : in_le16(isa_mtw(p)))
-+#define isa_writeb(val,p)  out_8(isa_mtb(p),(val))
-+#define isa_writew(val,p)  (ISA_SEX ? out_be16(isa_mtw(p),(val)) : out_le16(isa_mtw(p),(val)))
-+#else
- #define isa_readb(p)       in_8(isa_mtb((unsigned long)(p)))
- #define isa_readw(p)       \
- 	(ISA_SEX ? in_be16(isa_mtw((unsigned long)(p)))	\
-@@ -212,7 +218,7 @@ static inline u16 __iomem *isa_mtw(unsig
- #define isa_writew(val,p)  \
- 	(ISA_SEX ? out_be16(isa_mtw((unsigned long)(p)),(val))	\
- 		 : out_le16(isa_mtw((unsigned long)(p)),(val)))
--
-+#endif
- static inline void isa_delay(void)
- {
-   switch(ISA_TYPE)
-@@ -285,6 +291,29 @@ static inline void isa_delay(void)
- #endif /* CONFIG_ISA */
- 
- #if defined(CONFIG_PCI)
-+#ifdef CONFIG_COLDFIRE
-+#define inb_p   inb
-+#define inw_p   inw
-+#define inl_p   inl
-+#define outb_p  outb
-+#define outw_p  outw
-+#define outl_p  outl
-+
-+unsigned char  pci_inb(long addr);
-+unsigned short pci_inw(long addr);
-+unsigned long  pci_inl(long addr);
-+void pci_outb(unsigned char  val, long addr);
-+void pci_outw(unsigned short val, long addr);
-+void pci_outl(unsigned long  val, long addr);
-+
-+void pci_insb(volatile unsigned char* addr, unsigned char* buf, int len);
-+void pci_insw(volatile unsigned short* addr, unsigned short* buf, int len);
-+void pci_insl(volatile unsigned long* addr, unsigned long* buf, int len);
-+
-+void pci_outsb(volatile unsigned char* addr, const unsigned char* buf, int len);
-+void pci_outsw(volatile unsigned short* addr, const unsigned short* buf, int len);
-+void pci_outsl(volatile unsigned long* addr, const unsigned long* buf, int len);
-+#endif
- 
- #define readl(addr)      in_le32(addr)
- #define writel(val,addr) out_le32((addr),(val))
-@@ -300,12 +329,48 @@ static inline void isa_delay(void)
- #define readl_relaxed(addr) readl(addr)
- 
- #ifndef CONFIG_ISA
-+#ifndef CONFIG_COLDFIRE
- #define inb(port)      in_8(port)
- #define outb(val,port) out_8((port),(val))
- #define inw(port)      in_le16(port)
- #define outw(val,port) out_le16((port),(val))
- #define inl(port)      in_le32(port)
- #define outl(val,port) out_le32((port),(val))
-+#define insb(port, buf, nr)	\
-+		raw_insb((u8 *)(port), (u8 *)(buf), (nr))
-+#define outsb(port, buf, nr)	\
-+		raw_outsb((u8 *)(port), (u8 *)(buf), (nr))
-+#define insw(port, buf, nr)	\
-+		raw_insw_swapw((u16 *)(port), (u16 *)(buf), (nr))
-+#define outsw(port, buf, nr)	\
-+		raw_outsw_swapw((u16 *)(port), (u16 *)(buf), (nr))
-+#define insl(port, buf, nr)	\
-+		raw_insw_swapw((u16 *)(port), (u16 *)(buf), (nr)<<1)
-+#define outsl(port, buf, nr)	\
-+		raw_outsw_swapw((u16 *)(port), (u16 *)(buf), (nr)<<1)
-+#else
-+#define inb(port)      pci_inb(port)
-+#define outb(val,port) pci_outb((val),(port))
-+#define inw(port)      pci_inw(port)
-+#define outw(val,port) pci_outw((val),(port))
-+#define insb(a,b,c)  pci_insb((volatile unsigned char*)a,(unsigned char*)b,c)
-+#define insw(a,b,c)  pci_insw((volatile unsigned short*)a,(const unsigned short*)b,c)
-+#define insl(a,b,c)  pci_insl((volatile unsigned long*)a,(const unsigned long*)b,c)
-+#define outsb(a,b,c) pci_outsb((volatile unsigned char*)a,(const unsigned char*)b,c)
-+#define outsw(a,b,c) pci_outsw((volatile unsigned short*)a,(const unsigned short*)b,c)
-+#define outsl(a,b,c) pci_outsl((volatile unsigned long*)a,(const unsigned long*)b,c)
-+#define inl(port)        pci_inl(port)
-+#define outl(val,port)   pci_outl((val),(port))
-+#endif
-+
-+#ifndef CONFIG_COLDFIRE
-+#define __raw_readb readb
-+#define __raw_readw readw
-+#define __raw_readl readl
-+#define __raw_writeb writeb
-+#define __raw_writew writew
-+#define __raw_writel writel
-+#endif
- 
- #else
- /*
-@@ -397,10 +462,12 @@ static inline void memcpy_toio(volatile 
- 	__builtin_memcpy((void __force *) dst, src, count);
- }
- 
--#ifndef CONFIG_SUN3
--#define IO_SPACE_LIMIT 0xffff
--#else
-+#if defined(CONFIG_SUN3)
- #define IO_SPACE_LIMIT 0x0fffffff
-+#elif defined(CONFIG_COLDFIRE)
-+#define IO_SPACE_LIMIT 0xffffffff
-+#else
-+#define IO_SPACE_LIMIT 0xffff
- #endif
- 
- #endif /* __KERNEL__ */
-@@ -418,4 +485,31 @@ static inline void memcpy_toio(volatile 
-  */
- #define xlate_dev_kmem_ptr(p)	p
- 
-+#ifdef CONFIG_COLDFIRE
-+#define __raw_readb(addr) \
-+    ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
-+#define __raw_readw(addr) \
-+    ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
-+#define __raw_readl(addr) \
-+    ({ unsigned long __v = (*(volatile unsigned long *) (addr)); __v; })
-+#define __raw_writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
-+#define __raw_writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
-+#define __raw_writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
-+
-+#define memset_io(a, b, c) memset((void *)(a), (b), (c))
-+#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
-+#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
-+#if !defined(readb)
-+#define readb(addr) \
-+    ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
-+#define readw(addr) \
-+    ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
-+#define readl(addr) \
-+    ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
-+#define writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b))
-+#define writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b))
-+#define writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
-+#endif /* readb */
-+#endif /* CONFIG_COLDFIRE */
-+
- #endif /* _IO_H */
---- a/include/asm-m68k/irq.h
-+++ b/include/asm-m68k/irq.h
-@@ -11,7 +11,10 @@
-  * Currently the Atari has 72 and the Amiga 24, but if both are
-  * supported in the kernel it is better to make room for 72.
-  */
--#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
-+#if defined(CONFIG_COLDFIRE)
-+#define SYS_IRQS 256
-+#define NR_IRQS SYS_IRQS
-+#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
- #define NR_IRQS 200
- #elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
- #define NR_IRQS 72
---- /dev/null
-+++ b/include/asm-m68k/m5485dma.h
-@@ -0,0 +1,97 @@
-+/*
-+ *	m5485dma.h -- ColdFire 547x/548x DMA controller support.
-+ */
-+#ifndef __MCF548X_DMA_H__
-+#define __MCF548X_DMA_H__
-+
-+
-+/* Register read/write macros */
-+#define MCF_DMA_DIPR    (*(volatile u32*)(void*)(MCF_MBAR+0x008014))
-+#define MCF_DMA_DIMR    (*(volatile u32*)(void*)(MCF_MBAR+0x008018))
-+#define MCF_DMA_IMCR    (*(volatile u32*)(void*)(MCF_MBAR+0x00805C))
-+
-+/* Bit definitions and macros for MCF_DMA_DIPR */
-+#define MCF_DMA_DIPR_TASK0           (0x00000001)
-+#define MCF_DMA_DIPR_TASK1           (0x00000002)
-+#define MCF_DMA_DIPR_TASK2           (0x00000004)
-+#define MCF_DMA_DIPR_TASK3           (0x00000008)
-+#define MCF_DMA_DIPR_TASK4           (0x00000010)
-+#define MCF_DMA_DIPR_TASK5           (0x00000020)
-+#define MCF_DMA_DIPR_TASK6           (0x00000040)
-+#define MCF_DMA_DIPR_TASK7           (0x00000080)
-+#define MCF_DMA_DIPR_TASK8           (0x00000100)
-+#define MCF_DMA_DIPR_TASK9           (0x00000200)
-+#define MCF_DMA_DIPR_TASK10          (0x00000400)
-+#define MCF_DMA_DIPR_TASK11          (0x00000800)
-+#define MCF_DMA_DIPR_TASK12          (0x00001000)
-+#define MCF_DMA_DIPR_TASK13          (0x00002000)
-+#define MCF_DMA_DIPR_TASK14          (0x00004000)
-+#define MCF_DMA_DIPR_TASK15          (0x00008000)
-+
-+/* Bit definitions and macros for MCF_DMA_DIMR */
-+#define MCF_DMA_DIMR_TASK0           (0x00000001)
-+#define MCF_DMA_DIMR_TASK1           (0x00000002)
-+#define MCF_DMA_DIMR_TASK2           (0x00000004)
-+#define MCF_DMA_DIMR_TASK3           (0x00000008)
-+#define MCF_DMA_DIMR_TASK4           (0x00000010)
-+#define MCF_DMA_DIMR_TASK5           (0x00000020)
-+#define MCF_DMA_DIMR_TASK6           (0x00000040)
-+#define MCF_DMA_DIMR_TASK7           (0x00000080)
-+#define MCF_DMA_DIMR_TASK8           (0x00000100)
-+#define MCF_DMA_DIMR_TASK9           (0x00000200)
-+#define MCF_DMA_DIMR_TASK10          (0x00000400)
-+#define MCF_DMA_DIMR_TASK11          (0x00000800)
-+#define MCF_DMA_DIMR_TASK12          (0x00001000)
-+#define MCF_DMA_DIMR_TASK13          (0x00002000)
-+#define MCF_DMA_DIMR_TASK14          (0x00004000)
-+#define MCF_DMA_DIMR_TASK15          (0x00008000)
-+
-+/* Bit definitions and macros for MCF_DMA_IMCR */
-+#define MCF_DMA_IMCR_SRC16(x)        (((x)&0x00000003)<<0)
-+#define MCF_DMA_IMCR_SRC17(x)        (((x)&0x00000003)<<2)
-+#define MCF_DMA_IMCR_SRC18(x)        (((x)&0x00000003)<<4)
-+#define MCF_DMA_IMCR_SRC19(x)        (((x)&0x00000003)<<6)
-+#define MCF_DMA_IMCR_SRC20(x)        (((x)&0x00000003)<<8)
-+#define MCF_DMA_IMCR_SRC21(x)        (((x)&0x00000003)<<10)
-+#define MCF_DMA_IMCR_SRC22(x)        (((x)&0x00000003)<<12)
-+#define MCF_DMA_IMCR_SRC23(x)        (((x)&0x00000003)<<14)
-+#define MCF_DMA_IMCR_SRC24(x)        (((x)&0x00000003)<<16)
-+#define MCF_DMA_IMCR_SRC25(x)        (((x)&0x00000003)<<18)
-+#define MCF_DMA_IMCR_SRC26(x)        (((x)&0x00000003)<<20)
-+#define MCF_DMA_IMCR_SRC27(x)        (((x)&0x00000003)<<22)
-+#define MCF_DMA_IMCR_SRC28(x)        (((x)&0x00000003)<<24)
-+#define MCF_DMA_IMCR_SRC29(x)        (((x)&0x00000003)<<26)
-+#define MCF_DMA_IMCR_SRC30(x)        (((x)&0x00000003)<<28)
-+#define MCF_DMA_IMCR_SRC31(x)        (((x)&0x00000003)<<30)
-+#define MCF_DMA_IMCR_SRC16_FEC0RX    (0x00000000)
-+#define MCF_DMA_IMCR_SRC17_FEC0TX    (0x00000000)
-+#define MCF_DMA_IMCR_SRC18_FEC0RX    (0x00000020)
-+#define MCF_DMA_IMCR_SRC19_FEC0TX    (0x00000080)
-+#define MCF_DMA_IMCR_SRC20_FEC1RX    (0x00000100)
-+#define MCF_DMA_IMCR_SRC21_DREQ1     (0x00000000)
-+#define MCF_DMA_IMCR_SRC21_FEC1TX    (0x00000400)
-+#define MCF_DMA_IMCR_SRC22_FEC0RX    (0x00001000)
-+#define MCF_DMA_IMCR_SRC23_FEC0TX    (0x00004000)
-+#define MCF_DMA_IMCR_SRC24_CTM0      (0x00010000)
-+#define MCF_DMA_IMCR_SRC24_FEC1RX    (0x00020000)
-+#define MCF_DMA_IMCR_SRC25_CTM1      (0x00040000)
-+#define MCF_DMA_IMCR_SRC25_FEC1TX    (0x00080000)
-+#define MCF_DMA_IMCR_SRC26_USBEP4    (0x00000000)
-+#define MCF_DMA_IMCR_SRC26_CTM2      (0x00200000)
-+#define MCF_DMA_IMCR_SRC27_USBEP5    (0x00000000)
-+#define MCF_DMA_IMCR_SRC27_CTM3      (0x00800000)
-+#define MCF_DMA_IMCR_SRC28_USBEP6    (0x00000000)
-+#define MCF_DMA_IMCR_SRC28_CTM4      (0x01000000)
-+#define MCF_DMA_IMCR_SRC28_DREQ1     (0x02000000)
-+#define MCF_DMA_IMCR_SRC28_PSC2RX    (0x03000000)
-+#define MCF_DMA_IMCR_SRC29_DREQ1     (0x04000000)
-+#define MCF_DMA_IMCR_SRC29_CTM5      (0x08000000)
-+#define MCF_DMA_IMCR_SRC29_PSC2TX    (0x0C000000)
-+#define MCF_DMA_IMCR_SRC30_FEC1RX    (0x00000000)
-+#define MCF_DMA_IMCR_SRC30_CTM6      (0x10000000)
-+#define MCF_DMA_IMCR_SRC30_PSC3RX    (0x30000000)
-+#define MCF_DMA_IMCR_SRC31_FEC1TX    (0x00000000)
-+#define MCF_DMA_IMCR_SRC31_CTM7      (0x80000000)
-+#define MCF_DMA_IMCR_SRC31_PSC3TX    (0xC0000000)
-+
-+#endif /* __MCF548X_DMA_H__ */
---- /dev/null
-+++ b/include/asm-m68k/m5485dspi.h
-@@ -0,0 +1,144 @@
-+/*
-+ * File:	mcf548x_dspi.h
-+ * Purpose:	Register and bit definitions for the MCF548X
-+ *
-+ * Notes:
-+ *
-+ */
-+
-+#ifndef _M5485DSPI_H_
-+#define _M5485DSPI_H_
-+
-+/*
-+ *
-+ * DMA Serial Peripheral Interface (DSPI)
-+ *
-+ */
-+
-+/* Register read/write macros */
-+#define MCF_DSPI_DMCR         MCF_REG32(0x008A00)
-+#define MCF_DSPI_DTCR         MCF_REG32(0x008A08)
-+#define MCF_DSPI_DCTAR0       MCF_REG32(0x008A0C)
-+#define MCF_DSPI_DCTAR1       MCF_REG32(0x008A10)
-+#define MCF_DSPI_DCTAR2       MCF_REG32(0x008A14)
-+#define MCF_DSPI_DCTAR3       MCF_REG32(0x008A18)
-+#define MCF_DSPI_DCTAR4       MCF_REG32(0x008A1C)
-+#define MCF_DSPI_DCTAR5       MCF_REG32(0x008A20)
-+#define MCF_DSPI_DCTAR6       MCF_REG32(0x008A24)
-+#define MCF_DSPI_DCTAR7       MCF_REG32(0x008A28)
-+#define MCF_DSPI_DCTARn(x)    MCF_REG32(0x008A0C+(x*4))
-+#define MCF_DSPI_DSR          MCF_REG32(0x008A2C)
-+#define MCF_DSPI_DRSER        MCF_REG32(0x008A30)
-+#define MCF_DSPI_DTFR         MCF_REG32(0x008A34)
-+#define MCF_DSPI_DRFR         MCF_REG32(0x008A38)
-+#define MCF_DSPI_DTFDR0       MCF_REG32(0x008A3C)
-+#define MCF_DSPI_DTFDR1       MCF_REG32(0x008A40)
-+#define MCF_DSPI_DTFDR2       MCF_REG32(0x008A44)
-+#define MCF_DSPI_DTFDR3       MCF_REG32(0x008A48)
-+#define MCF_DSPI_DTFDRn(x)    MCF_REG32(0x008A3C+(x*4))
-+#define MCF_DSPI_DRFDR0       MCF_REG32(0x008A7C)
-+#define MCF_DSPI_DRFDR1       MCF_REG32(0x008A80)
-+#define MCF_DSPI_DRFDR2       MCF_REG32(0x008A84)
-+#define MCF_DSPI_DRFDR3       MCF_REG32(0x008A88)
-+#define MCF_DSPI_DRFDRn(x)    MCF_REG32(0x008A7C+(x*4))
-+
-+/* Bit definitions and macros for MCF_DSPI_DMCR */
-+#define MCF_DSPI_DMCR_HALT             (0x00000001)
-+#define MCF_DSPI_DMCR_SMPL_PT(x)       (((x)&0x00000003)<<8)
-+#define MCF_DSPI_DMCR_CRXF             (0x00000400)
-+#define MCF_DSPI_DMCR_CTXF             (0x00000800)
-+#define MCF_DSPI_DMCR_DRXF             (0x00001000)
-+#define MCF_DSPI_DMCR_DTXF             (0x00002000)
-+#define MCF_DSPI_DMCR_CSIS0            (0x00010000)
-+#define MCF_DSPI_DMCR_CSIS2            (0x00040000)
-+#define MCF_DSPI_DMCR_CSIS3            (0x00080000)
-+#define MCF_DSPI_DMCR_CSIS5            (0x00200000)
-+#define MCF_DSPI_DMCR_ROOE             (0x01000000)
-+#define MCF_DSPI_DMCR_PCSSE            (0x02000000)
-+#define MCF_DSPI_DMCR_MTFE             (0x04000000)
-+#define MCF_DSPI_DMCR_FRZ              (0x08000000)
-+#define MCF_DSPI_DMCR_DCONF(x)         (((x)&0x00000003)<<28)
-+#define MCF_DSPI_DMCR_CSCK             (0x40000000)
-+#define MCF_DSPI_DMCR_MSTR             (0x80000000)
-+
-+/* Bit definitions and macros for MCF_DSPI_DTCR */
-+#define MCF_DSPI_DTCR_SPI_TCNT(x)      (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_DSPI_DCTARn */
-+#define MCF_DSPI_DCTAR_BR(x)          (((x)&0x0000000F)<<0)
-+#define MCF_DSPI_DCTAR_DT(x)          (((x)&0x0000000F)<<4)
-+#define MCF_DSPI_DCTAR_ASC(x)         (((x)&0x0000000F)<<8)
-+#define MCF_DSPI_DCTAR_CSSCK(x)       (((x)&0x0000000F)<<12)
-+#define MCF_DSPI_DCTAR_PBR(x)         (((x)&0x00000003)<<16)
-+#define MCF_DSPI_DCTAR_PDT(x)         (((x)&0x00000003)<<18)
-+#define MCF_DSPI_DCTAR_PASC(x)        (((x)&0x00000003)<<20)
-+#define MCF_DSPI_DCTAR_PCSSCK(x)      (((x)&0x00000003)<<22)
-+#define MCF_DSPI_DCTAR_LSBFE          (0x01000000)
-+#define MCF_DSPI_DCTAR_CPHA           (0x02000000)
-+#define MCF_DSPI_DCTAR_CPOL           (0x04000000)
-+/* #define MCF_DSPI_DCTAR_TRSZ(x)        (((x)&0x0000000F)<<27) */
-+#define MCF_DSPI_DCTAR_FMSZ(x)        (((x)&0x0000000F)<<27)
-+#define MCF_DSPI_DCTAR_PCSSCK_1CLK    (0x00000000)
-+#define MCF_DSPI_DCTAR_PCSSCK_3CLK    (0x00400000)
-+#define MCF_DSPI_DCTAR_PCSSCK_5CLK    (0x00800000)
-+#define MCF_DSPI_DCTAR_PCSSCK_7CLK    (0x00A00000)
-+#define MCF_DSPI_DCTAR_PASC_1CLK      (0x00000000)
-+#define MCF_DSPI_DCTAR_PASC_3CLK      (0x00100000)
-+#define MCF_DSPI_DCTAR_PASC_5CLK      (0x00200000)
-+#define MCF_DSPI_DCTAR_PASC_7CLK      (0x00300000)
-+#define MCF_DSPI_DCTAR_PDT_1CLK       (0x00000000)
-+#define MCF_DSPI_DCTAR_PDT_3CLK       (0x00040000)
-+#define MCF_DSPI_DCTAR_PDT_5CLK       (0x00080000)
-+#define MCF_DSPI_DCTAR_PDT_7CLK       (0x000A0000)
-+#define MCF_DSPI_DCTAR_PBR_1CLK       (0x00000000)
-+#define MCF_DSPI_DCTAR_PBR_3CLK       (0x00010000)
-+#define MCF_DSPI_DCTAR_PBR_5CLK       (0x00020000)
-+#define MCF_DSPI_DCTAR_PBR_7CLK       (0x00030000)
-+
-+/* Bit definitions and macros for MCF_DSPI_DSR */
-+#define MCF_DSPI_DSR_RXPTR(x)          (((x)&0x0000000F)<<0)
-+#define MCF_DSPI_DSR_RXCTR(x)          (((x)&0x0000000F)<<4)
-+#define MCF_DSPI_DSR_TXPTR(x)          (((x)&0x0000000F)<<8)
-+#define MCF_DSPI_DSR_TXCTR(x)          (((x)&0x0000000F)<<12)
-+#define MCF_DSPI_DSR_RFDF              (0x00020000)
-+#define MCF_DSPI_DSR_RFOF              (0x00080000)
-+#define MCF_DSPI_DSR_TFFF              (0x02000000)
-+#define MCF_DSPI_DSR_TFUF              (0x08000000)
-+#define MCF_DSPI_DSR_EOQF              (0x10000000)
-+#define MCF_DSPI_DSR_TXRXS             (0x40000000)
-+#define MCF_DSPI_DSR_TCF               (0x80000000)
-+
-+/* Bit definitions and macros for MCF_DSPI_DRSER */
-+#define MCF_DSPI_DRSER_RFDFS           (0x00010000)
-+#define MCF_DSPI_DRSER_RFDFE           (0x00020000)
-+#define MCF_DSPI_DRSER_RFOFE           (0x00080000)
-+#define MCF_DSPI_DRSER_TFFFS           (0x01000000)
-+#define MCF_DSPI_DRSER_TFFFE           (0x02000000)
-+#define MCF_DSPI_DRSER_TFUFE           (0x08000000)
-+#define MCF_DSPI_DRSER_EOQFE           (0x10000000)
-+#define MCF_DSPI_DRSER_TCFE            (0x80000000)
-+
-+/* Bit definitions and macros for MCF_DSPI_DTFR */
-+#define MCF_DSPI_DTFR_TXDATA(x)        (((x)&0x0000FFFF)<<0)
-+#define MCF_DSPI_DTFR_CS0              (0x00010000)
-+#define MCF_DSPI_DTFR_CS2              (0x00040000)
-+#define MCF_DSPI_DTFR_CS3              (0x00080000)
-+#define MCF_DSPI_DTFR_CS5              (0x00200000)
-+#define MCF_DSPI_DTFR_CTCNT            (0x04000000)
-+#define MCF_DSPI_DTFR_EOQ              (0x08000000)
-+#define MCF_DSPI_DTFR_CTAS(x)          (((x)&0x00000007)<<28)
-+#define MCF_DSPI_DTFR_CONT             (0x80000000)
-+
-+/* Bit definitions and macros for MCF_DSPI_DRFR */
-+#define MCF_DSPI_DRFR_RXDATA(x)        (((x)&0x0000FFFF)<<0)
-+
-+/* Bit definitions and macros for MCF_DSPI_DTFDRn */
-+#define MCF_DSPI_DTFDRn_TXDATA(x)      (((x)&0x0000FFFF)<<0)
-+#define MCF_DSPI_DTFDRn_TXCMD(x)       (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_DSPI_DRFDRn */
-+#define MCF_DSPI_DRFDRn_RXDATA(x)      (((x)&0x0000FFFF)<<0)
-+
-+/********************************************************************/
-+
-+#endif /* _M5485DSPI_H_ */
---- /dev/null
-+++ b/include/asm-m68k/m5485gpio.h
-@@ -0,0 +1,694 @@
-+/*
-+ * File:	mcf548x_gpio.h
-+ * Purpose:	Register and bit definitions for the MCF548X
-+ *
-+ * Notes:	
-+ *	
-+ */
-+
-+#ifndef _M5485GPIO_H_
-+#define _M5485GPIO_H_
-+
-+/*********************************************************************
-+*
-+* General Purpose I/O (GPIO)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_GPIO_PODR_FBCTL         MCF_REG08(0x000A00)
-+#define MCF_GPIO_PODR_FBCS          MCF_REG08(0x000A01)
-+#define MCF_GPIO_PODR_DMA           MCF_REG08(0x000A02)
-+#define MCF_GPIO_PODR_FEC0H         MCF_REG08(0x000A04)
-+#define MCF_GPIO_PODR_FEC0L         MCF_REG08(0x000A05)
-+#define MCF_GPIO_PODR_FEC1H         MCF_REG08(0x000A06)
-+#define MCF_GPIO_PODR_FEC1L         MCF_REG08(0x000A07)
-+#define MCF_GPIO_PODR_FECI2C        MCF_REG08(0x000A08)
-+#define MCF_GPIO_PODR_PCIBG         MCF_REG08(0x000A09)
-+#define MCF_GPIO_PODR_PCIBR         MCF_REG08(0x000A0A)
-+#define MCF_GPIO_PODR_PSC3PSC2      MCF_REG08(0x000A0C)
-+#define MCF_GPIO_PODR_PSC1PSC0      MCF_REG08(0x000A0D)
-+#define MCF_GPIO_PODR_DSPI          MCF_REG08(0x000A0E)
-+#define MCF_GPIO_PDDR_FBCTL         MCF_REG08(0x000A10)
-+#define MCF_GPIO_PDDR_FBCS          MCF_REG08(0x000A11)
-+#define MCF_GPIO_PDDR_DMA           MCF_REG08(0x000A12)
-+#define MCF_GPIO_PDDR_FEC0H         MCF_REG08(0x000A14)
-+#define MCF_GPIO_PDDR_FEC0L         MCF_REG08(0x000A15)
-+#define MCF_GPIO_PDDR_FEC1H         MCF_REG08(0x000A16)
-+#define MCF_GPIO_PDDR_FEC1L         MCF_REG08(0x000A17)
-+#define MCF_GPIO_PDDR_FECI2C        MCF_REG08(0x000A18)
-+#define MCF_GPIO_PDDR_PCIBG         MCF_REG08(0x000A19)
-+#define MCF_GPIO_PDDR_PCIBR         MCF_REG08(0x000A1A)
-+#define MCF_GPIO_PDDR_PSC3PSC2      MCF_REG08(0x000A1C)
-+#define MCF_GPIO_PDDR_PSC1PSC0      MCF_REG08(0x000A1D)
-+#define MCF_GPIO_PDDR_DSPI          MCF_REG08(0x000A1E)
-+#define MCF_GPIO_PPDSDR_FBCTL       MCF_REG08(0x000A20)
-+#define MCF_GPIO_PPDSDR_FBCS        MCF_REG08(0x000A21)
-+#define MCF_GPIO_PPDSDR_DMA         MCF_REG08(0x000A22)
-+#define MCF_GPIO_PPDSDR_FEC0H       MCF_REG08(0x000A24)
-+#define MCF_GPIO_PPDSDR_FEC0L       MCF_REG08(0x000A25)
-+#define MCF_GPIO_PPDSDR_FEC1H       MCF_REG08(0x000A26)
-+#define MCF_GPIO_PPDSDR_FEC1L       MCF_REG08(0x000A27)
-+#define MCF_GPIO_PPDSDR_FECI2C      MCF_REG08(0x000A28)
-+#define MCF_GPIO_PPDSDR_PCIBG       MCF_REG08(0x000A29)
-+#define MCF_GPIO_PPDSDR_PCIBR       MCF_REG08(0x000A2A)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2    MCF_REG08(0x000A2C)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0    MCF_REG08(0x000A2D)
-+#define MCF_GPIO_PPDSDR_DSPI        MCF_REG08(0x000A2E)
-+#define MCF_GPIO_PCLRR_FBCTL        MCF_REG08(0x000A30)
-+#define MCF_GPIO_PCLRR_FBCS         MCF_REG08(0x000A31)
-+#define MCF_GPIO_PCLRR_DMA          MCF_REG08(0x000A32)
-+#define MCF_GPIO_PCLRR_FEC0H        MCF_REG08(0x000A34)
-+#define MCF_GPIO_PCLRR_FEC0L        MCF_REG08(0x000A35)
-+#define MCF_GPIO_PCLRR_FEC1H        MCF_REG08(0x000A36)
-+#define MCF_GPIO_PCLRR_FEC1L        MCF_REG08(0x000A37)
-+#define MCF_GPIO_PCLRR_FECI2C       MCF_REG08(0x000A38)
-+#define MCF_GPIO_PCLRR_PCIBG        MCF_REG08(0x000A39)
-+#define MCF_GPIO_PCLRR_PCIBR        MCF_REG08(0x000A3A)
-+#define MCF_GPIO_PCLRR_PSC3PSC2     MCF_REG08(0x000A3C)
-+#define MCF_GPIO_PCLRR_PSC1PSC0     MCF_REG08(0x000A3D)
-+#define MCF_GPIO_PCLRR_DSPI         MCF_REG08(0x000A3E)
-+#define MCF_GPIO_PAR_FBCTL          MCF_REG16(0x000A40)
-+#define MCF_GPIO_PAR_FBCS           MCF_REG08(0x000A42)
-+#define MCF_GPIO_PAR_DMA            MCF_REG08(0x000A43)
-+#define MCF_GPIO_PAR_FECI2CIRQ      MCF_REG16(0x000A44)
-+#define MCF_GPIO_PAR_PCIBG          MCF_REG16(0x000A48)
-+#define MCF_GPIO_PAR_PCIBR          MCF_REG16(0x000A4A)
-+#define MCF_GPIO_PAR_PSC3           MCF_REG08(0x000A4C)
-+#define MCF_GPIO_PAR_PSC2           MCF_REG08(0x000A4D)
-+#define MCF_GPIO_PAR_PSC1           MCF_REG08(0x000A4E)
-+#define MCF_GPIO_PAR_PSC0           MCF_REG08(0x000A4F)
-+#define MCF_GPIO_PAR_DSPI           MCF_REG16(0x000A50)
-+#define MCF_GPIO_PAR_TIMER          MCF_REG08(0x000A52)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_FBCTL */
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL0              (0x01)
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL1              (0x02)
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL2              (0x04)
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL3              (0x08)
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL4              (0x10)
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL5              (0x20)
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL6              (0x40)
-+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL7              (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_FBCS */
-+#define MCF_GPIO_PODR_FBCS_PODRFBCS1                (0x02)
-+#define MCF_GPIO_PODR_FBCS_PODRFBCS2                (0x04)
-+#define MCF_GPIO_PODR_FBCS_PODRFBCS3                (0x08)
-+#define MCF_GPIO_PODR_FBCS_PODRFBCS4                (0x10)
-+#define MCF_GPIO_PODR_FBCS_PODRFBCS5                (0x20)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_DMA */
-+#define MCF_GPIO_PODR_DMA_PODRDMA0                  (0x01)
-+#define MCF_GPIO_PODR_DMA_PODRDMA1                  (0x02)
-+#define MCF_GPIO_PODR_DMA_PODRDMA2                  (0x04)
-+#define MCF_GPIO_PODR_DMA_PODRDMA3                  (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_FEC0H */
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H0              (0x01)
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H1              (0x02)
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H2              (0x04)
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H3              (0x08)
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H4              (0x10)
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H5              (0x20)
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H6              (0x40)
-+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H7              (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_FEC0L */
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L0              (0x01)
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L1              (0x02)
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L2              (0x04)
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L3              (0x08)
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L4              (0x10)
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L5              (0x20)
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L6              (0x40)
-+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L7              (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_FEC1H */
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H0              (0x01)
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H1              (0x02)
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H2              (0x04)
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H3              (0x08)
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H4              (0x10)
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H5              (0x20)
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H6              (0x40)
-+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H7              (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_FEC1L */
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L0              (0x01)
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L1              (0x02)
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L2              (0x04)
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L3              (0x08)
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L4              (0x10)
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L5              (0x20)
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L6              (0x40)
-+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L7              (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */
-+#define MCF_GPIO_PODR_FECI2C_PODRFECI2C0            (0x01)
-+#define MCF_GPIO_PODR_FECI2C_PODRFECI2C1            (0x02)
-+#define MCF_GPIO_PODR_FECI2C_PODRFECI2C2            (0x04)
-+#define MCF_GPIO_PODR_FECI2C_PODRFECI2C3            (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_PCIBG */
-+#define MCF_GPIO_PODR_PCIBG_PODRPCIBG0              (0x01)
-+#define MCF_GPIO_PODR_PCIBG_PODRPCIBG1              (0x02)
-+#define MCF_GPIO_PODR_PCIBG_PODRPCIBG2              (0x04)
-+#define MCF_GPIO_PODR_PCIBG_PODRPCIBG3              (0x08)
-+#define MCF_GPIO_PODR_PCIBG_PODRPCIBG4              (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_PCIBR */
-+#define MCF_GPIO_PODR_PCIBR_PODRPCIBR0              (0x01)
-+#define MCF_GPIO_PODR_PCIBR_PODRPCIBR1              (0x02)
-+#define MCF_GPIO_PODR_PCIBR_PODRPCIBR2              (0x04)
-+#define MCF_GPIO_PODR_PCIBR_PODRPCIBR3              (0x08)
-+#define MCF_GPIO_PODR_PCIBR_PODRPCIBR4              (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_PSC3PSC2 */
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC20        (0x01)
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC21        (0x02)
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC22        (0x04)
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC23        (0x08)
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC24        (0x10)
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC25        (0x20)
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC26        (0x40)
-+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC27        (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_PSC1PSC0 */
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC00        (0x01)
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC01        (0x02)
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC02        (0x04)
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC03        (0x08)
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC04        (0x10)
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC05        (0x20)
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC06        (0x40)
-+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC07        (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PODR_DSPI */
-+#define MCF_GPIO_PODR_DSPI_PODRDSPI0                (0x01)
-+#define MCF_GPIO_PODR_DSPI_PODRDSPI1                (0x02)
-+#define MCF_GPIO_PODR_DSPI_PODRDSPI2                (0x04)
-+#define MCF_GPIO_PODR_DSPI_PODRDSPI3                (0x08)
-+#define MCF_GPIO_PODR_DSPI_PODRDSPI4                (0x10)
-+#define MCF_GPIO_PODR_DSPI_PODRDSPI5                (0x20)
-+#define MCF_GPIO_PODR_DSPI_PODRDSPI6                (0x40)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_FBCTL */
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL0              (0x01)
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL1              (0x02)
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL2              (0x04)
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL3              (0x08)
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL4              (0x10)
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL5              (0x20)
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL6              (0x40)
-+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL7              (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_FBCS */
-+#define MCF_GPIO_PDDR_FBCS_PDDRFBCS1                (0x02)
-+#define MCF_GPIO_PDDR_FBCS_PDDRFBCS2                (0x04)
-+#define MCF_GPIO_PDDR_FBCS_PDDRFBCS3                (0x08)
-+#define MCF_GPIO_PDDR_FBCS_PDDRFBCS4                (0x10)
-+#define MCF_GPIO_PDDR_FBCS_PDDRFBCS5                (0x20)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_DMA */
-+#define MCF_GPIO_PDDR_DMA_PDDRDMA0                  (0x01)
-+#define MCF_GPIO_PDDR_DMA_PDDRDMA1                  (0x02)
-+#define MCF_GPIO_PDDR_DMA_PDDRDMA2                  (0x04)
-+#define MCF_GPIO_PDDR_DMA_PDDRDMA3                  (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_FEC0H */
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H0              (0x01)
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H1              (0x02)
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H2              (0x04)
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H3              (0x08)
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H4              (0x10)
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H5              (0x20)
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H6              (0x40)
-+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H7              (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_FEC0L */
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L0              (0x01)
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L1              (0x02)
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L2              (0x04)
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L3              (0x08)
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L4              (0x10)
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L5              (0x20)
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L6              (0x40)
-+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L7              (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_FEC1H */
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H0              (0x01)
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H1              (0x02)
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H2              (0x04)
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H3              (0x08)
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H4              (0x10)
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H5              (0x20)
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H6              (0x40)
-+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H7              (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_FEC1L */
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L0              (0x01)
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L1              (0x02)
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L2              (0x04)
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L3              (0x08)
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L4              (0x10)
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L5              (0x20)
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L6              (0x40)
-+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L7              (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */
-+#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C0            (0x01)
-+#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C1            (0x02)
-+#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C2            (0x04)
-+#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C3            (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_PCIBG */
-+#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG0              (0x01)
-+#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG1              (0x02)
-+#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG2              (0x04)
-+#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG3              (0x08)
-+#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG4              (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_PCIBR */
-+#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR0              (0x01)
-+#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR1              (0x02)
-+#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR2              (0x04)
-+#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR3              (0x08)
-+#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR4              (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_PSC3PSC2 */
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC20        (0x01)
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC21        (0x02)
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC22        (0x04)
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC23        (0x08)
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC24        (0x10)
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC25        (0x20)
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC26        (0x40)
-+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC27        (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_PSC1PSC0 */
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC00        (0x01)
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC01        (0x02)
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC02        (0x04)
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC03        (0x08)
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC04        (0x10)
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC05        (0x20)
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC06        (0x40)
-+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC07        (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PDDR_DSPI */
-+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI0                (0x01)
-+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI1                (0x02)
-+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI2                (0x04)
-+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI3                (0x08)
-+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI4                (0x10)
-+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI5                (0x20)
-+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI6                (0x40)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FBCTL */
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL0          (0x01)
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL1          (0x02)
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL2          (0x04)
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL3          (0x08)
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL4          (0x10)
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL5          (0x20)
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL6          (0x40)
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL7          (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FBCS */
-+#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS1            (0x02)
-+#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS2            (0x04)
-+#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS3            (0x08)
-+#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS4            (0x10)
-+#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS5            (0x20)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_DMA */
-+#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA0              (0x01)
-+#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA1              (0x02)
-+#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA2              (0x04)
-+#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA3              (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC0H */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H0          (0x01)
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H1          (0x02)
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H2          (0x04)
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H3          (0x08)
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H4          (0x10)
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H5          (0x20)
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H6          (0x40)
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H7          (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC0L */
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L0          (0x01)
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L1          (0x02)
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L2          (0x04)
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L3          (0x08)
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L4          (0x10)
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L5          (0x20)
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L6          (0x40)
-+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L7          (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC1H */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H0          (0x01)
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H1          (0x02)
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H2          (0x04)
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H3          (0x08)
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H4          (0x10)
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H5          (0x20)
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H6          (0x40)
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H7          (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC1L */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L0          (0x01)
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L1          (0x02)
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L2          (0x04)
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L3          (0x08)
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L4          (0x10)
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L5          (0x20)
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L6          (0x40)
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L7          (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C0        (0x01)
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C1        (0x02)
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C2        (0x04)
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C3        (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PCIBG */
-+#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG0          (0x01)
-+#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG1          (0x02)
-+#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG2          (0x04)
-+#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG3          (0x08)
-+#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG4          (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PCIBR */
-+#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR0          (0x01)
-+#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR1          (0x02)
-+#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR2          (0x04)
-+#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR3          (0x08)
-+#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR4          (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PSC3PSC2 */
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC20    (0x01)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC21    (0x02)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC22    (0x04)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC23    (0x08)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PDDRPSC3PSC24      (0x10)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PDDRPSC3PSC25      (0x20)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC26    (0x40)
-+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC27    (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PSC1PSC0 */
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC00    (0x01)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PDDRPSC1PSC01      (0x02)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC02    (0x04)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PDDRPSC1PSC03      (0x08)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC04    (0x10)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC05    (0x20)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC06    (0x40)
-+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC07    (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PPDSDR_DSPI */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI0            (0x01)
-+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI1            (0x02)
-+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI2            (0x04)
-+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI3            (0x08)
-+#define MCF_GPIO_PPDSDR_DSPI_PDDRDSPI4              (0x10)
-+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI5            (0x20)
-+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI6            (0x40)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_FBCTL */
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL0            (0x01)
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL1            (0x02)
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL2            (0x04)
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL3            (0x08)
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL4            (0x10)
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL5            (0x20)
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL6            (0x40)
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL7            (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_FBCS */
-+#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS1              (0x02)
-+#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS2              (0x04)
-+#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS3              (0x08)
-+#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS4              (0x10)
-+#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS5              (0x20)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_DMA */
-+#define MCF_GPIO_PCLRR_DMA_PCLRRDMA0                (0x01)
-+#define MCF_GPIO_PCLRR_DMA_PCLRRDMA1                (0x02)
-+#define MCF_GPIO_PCLRR_DMA_PCLRRDMA2                (0x04)
-+#define MCF_GPIO_PCLRR_DMA_PCLRRDMA3                (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC0H */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H0            (0x01)
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H1            (0x02)
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H2            (0x04)
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H3            (0x08)
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H4            (0x10)
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H5            (0x20)
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H6            (0x40)
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H7            (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC0L */
-+#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L0            (0x01)
-+#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L1             (0x02)
-+#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L2            (0x04)
-+#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L3            (0x08)
-+#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L4             (0x10)
-+#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L5             (0x20)
-+#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L6             (0x40)
-+#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L7            (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC1H */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H0            (0x01)
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H1            (0x02)
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H2            (0x04)
-+#define MCF_GPIO_PCLRR_FEC1H_PODRFEC1H3             (0x08)
-+#define MCF_GPIO_PCLRR_FEC1H_PODRFEC1H4             (0x10)
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H5            (0x20)
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H6            (0x40)
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H7            (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC1L */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L0            (0x01)
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L1            (0x02)
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L2            (0x04)
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L3            (0x08)
-+#define MCF_GPIO_PCLRR_FEC1L_PODRFEC1L4             (0x10)
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L5            (0x20)
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L6            (0x40)
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L7            (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRRFECI2C0          (0x01)
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRRFECI2C1          (0x02)
-+#define MCF_GPIO_PCLRR_FECI2C_PODRFECI2C2           (0x04)
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRRFECI2C3          (0x08)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_PCIBG */
-+#define MCF_GPIO_PCLRR_PCIBG_PODRPCIBG0             (0x01)
-+#define MCF_GPIO_PCLRR_PCIBG_PODRPCIBG1             (0x02)
-+#define MCF_GPIO_PCLRR_PCIBG_PODRPCIBG2             (0x04)
-+#define MCF_GPIO_PCLRR_PCIBG_PCLRRPCIBG3            (0x08)
-+#define MCF_GPIO_PCLRR_PCIBG_PCLRRPCIBG4            (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_PCIBR */
-+#define MCF_GPIO_PCLRR_PCIBR_PCLRRPCIBR0            (0x01)
-+#define MCF_GPIO_PCLRR_PCIBR_PCLRRPCIBR1            (0x02)
-+#define MCF_GPIO_PCLRR_PCIBR_PCLRRPCIBR2            (0x04)
-+#define MCF_GPIO_PCLRR_PCIBR_PODRPCIBR3             (0x08)
-+#define MCF_GPIO_PCLRR_PCIBR_PODRPCIBR4             (0x10)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_PSC3PSC2 */
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC20       (0x01)
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC21       (0x02)
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC22      (0x04)
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC23      (0x08)
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC24      (0x10)
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC25       (0x20)
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC26       (0x40)
-+#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC27      (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_PSC1PSC0 */
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC00      (0x01)
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC01      (0x02)
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC02      (0x04)
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC03      (0x08)
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC04      (0x10)
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC05      (0x20)
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PODRPSC1PSC06       (0x40)
-+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC07      (0x80)
-+
-+/* Bit definitions and macros for MCF_GPIO_PCLRR_DSPI */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI0              (0x01)
-+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI1              (0x02)
-+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI2              (0x04)
-+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI3              (0x08)
-+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI4              (0x10)
-+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI5              (0x20)
-+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI6              (0x40)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_FBCTL */
-+#define MCF_GPIO_PAR_FBCTL_PAR_TS(x)                (((x)&0x0003)<<0)
-+#define MCF_GPIO_PAR_FBCTL_PAR_TA                   (0x0004)
-+#define MCF_GPIO_PAR_FBCTL_PAR_RWB                  (0x0010)
-+#define MCF_GPIO_PAR_FBCTL_PAR_OE                   (0x0040)
-+#define MCF_GPIO_PAR_FBCTL_PAR_BWE0                 (0x0100)
-+#define MCF_GPIO_PAR_FBCTL_PAR_BWE1                 (0x0400)
-+#define MCF_GPIO_PAR_FBCTL_PAR_BWE2                 (0x1000)
-+#define MCF_GPIO_PAR_FBCTL_PAR_BWE3                 (0x4000)
-+#define MCF_GPIO_PAR_FBCTL_PAR_TS_GPIO              (0)
-+#define MCF_GPIO_PAR_FBCTL_PAR_TS_TBST              (2)
-+#define MCF_GPIO_PAR_FBCTL_PAR_TS_TS                (3)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_FBCS */
-+#define MCF_GPIO_PAR_FBCS_PAR_CS1                   (0x02)
-+#define MCF_GPIO_PAR_FBCS_PAR_CS2                   (0x04)
-+#define MCF_GPIO_PAR_FBCS_PAR_CS3                   (0x08)
-+#define MCF_GPIO_PAR_FBCS_PAR_CS4                   (0x10)
-+#define MCF_GPIO_PAR_FBCS_PAR_CS5                   (0x20)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_DMA */
-+#define MCF_GPIO_PAR_DMA_PAR_DREQ0(x)               (((x)&0x03)<<0)
-+#define MCF_GPIO_PAR_DMA_PAR_DREQ1(x)               (((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_DMA_PAR_DACK0(x)               (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_DMA_PAR_DACK1(x)               (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_DMA_PAR_DACKx_GPIO             (0)
-+#define MCF_GPIO_PAR_DMA_PAR_DACKx_TOUT             (2)
-+#define MCF_GPIO_PAR_DMA_PAR_DACKx_DACK             (3)
-+#define MCF_GPIO_PAR_DMA_PAR_DREQx_GPIO             (0)
-+#define MCF_GPIO_PAR_DMA_PAR_DREQx_TIN              (2)
-+#define MCF_GPIO_PAR_DMA_PAR_DREQx_DREQ             (3)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_FECI2CIRQ */
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_IRQ5             (0x0001)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_IRQ6             (0x0002)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_SCL              (0x0004)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_SDA              (0x0008)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC(x)         (((x)&0x0003)<<6)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO(x)        (((x)&0x0003)<<8)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MII            (0x0400)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E17              (0x0800)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E0MDC            (0x1000)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E0MDIO           (0x2000)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E0MII            (0x4000)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E07              (0x8000)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO_CANRX     (0x0000)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO_SDA       (0x0200)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO_EMDIO     (0x0300)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC_CANTX      (0x0000)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC_SCL        (0x0080)
-+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC_EMDC       (0x00C0)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_PCIBG */
-+#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG0(x)            (((x)&0x0003)<<0)
-+#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG1(x)            (((x)&0x0003)<<2)
-+#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG2(x)            (((x)&0x0003)<<4)
-+#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG3(x)            (((x)&0x0003)<<6)
-+#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG4(x)            (((x)&0x0003)<<8)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_PCIBR */
-+#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG0(x)            (((x)&0x0003)<<0)
-+#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG1(x)            (((x)&0x0003)<<2)
-+#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG2(x)            (((x)&0x0003)<<4)
-+#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG3(x)            (((x)&0x0003)<<6)
-+#define MCF_GPIO_PAR_PCIBR_PAR_PCIBR4(x)            (((x)&0x0003)<<8)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_PSC3 */
-+#define MCF_GPIO_PAR_PSC3_PAR_TXD3                  (0x04)
-+#define MCF_GPIO_PAR_PSC3_PAR_RXD3                  (0x08)
-+#define MCF_GPIO_PAR_PSC3_PAR_RTS3(x)               (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_PSC3_PAR_CTS3(x)               (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_PSC3_PAR_CTS3_GPIO             (0x00)
-+#define MCF_GPIO_PAR_PSC3_PAR_CTS3_BCLK             (0x80)
-+#define MCF_GPIO_PAR_PSC3_PAR_CTS3_CTS              (0xC0)
-+#define MCF_GPIO_PAR_PSC3_PAR_RTS3_GPIO             (0x00)
-+#define MCF_GPIO_PAR_PSC3_PAR_RTS3_FSYNC            (0x20)
-+#define MCF_GPIO_PAR_PSC3_PAR_RTS3_RTS              (0x30)
-+#define MCF_GPIO_PAR_PSC3_PAR_CTS2_CANRX            (0x40)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_PSC2 */
-+#define MCF_GPIO_PAR_PSC2_PAR_TXD2                  (0x04)
-+#define MCF_GPIO_PAR_PSC2_PAR_RXD2                  (0x08)
-+#define MCF_GPIO_PAR_PSC2_PAR_RTS2(x)               (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_PSC2_PAR_CTS2(x)               (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_PSC2_PAR_CTS2_GPIO             (0x00)
-+#define MCF_GPIO_PAR_PSC2_PAR_CTS2_BCLK             (0x80)
-+#define MCF_GPIO_PAR_PSC2_PAR_CTS2_CTS              (0xC0)
-+#define MCF_GPIO_PAR_PSC2_PAR_RTS2_GPIO             (0x00)
-+#define MCF_GPIO_PAR_PSC2_PAR_RTS2_CANTX            (0x10)
-+#define MCF_GPIO_PAR_PSC2_PAR_RTS2_FSYNC            (0x20)
-+#define MCF_GPIO_PAR_PSC2_PAR_RTS2_RTS              (0x30)
-+#define MCF_GPIO_PAR_PSC2_PAR_RTS2_CANRX            (0x40)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_PSC1 */
-+#define MCF_GPIO_PAR_PSC1_PAR_TXD1                  (0x04)
-+#define MCF_GPIO_PAR_PSC1_PAR_RXD1                  (0x08)
-+#define MCF_GPIO_PAR_PSC1_PAR_RTS1(x)               (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_PSC1_PAR_CTS1(x)               (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_PSC1_PAR_CTS1_GPIO             (0x00)
-+#define MCF_GPIO_PAR_PSC1_PAR_CTS1_BCLK             (0x80)
-+#define MCF_GPIO_PAR_PSC1_PAR_CTS1_CTS              (0xC0)
-+#define MCF_GPIO_PAR_PSC1_PAR_RTS1_GPIO             (0x00)
-+#define MCF_GPIO_PAR_PSC1_PAR_RTS1_FSYNC            (0x20)
-+#define MCF_GPIO_PAR_PSC1_PAR_RTS1_RTS              (0x30)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_PSC0 */
-+#define MCF_GPIO_PAR_PSC0_PAR_TXD0                  (0x04)
-+#define MCF_GPIO_PAR_PSC0_PAR_RXD0                  (0x08)
-+#define MCF_GPIO_PAR_PSC0_PAR_RTS0(x)               (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_PSC0_PAR_CTS0(x)               (((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_PSC0_PAR_CTS0_GPIO             (0x00)
-+#define MCF_GPIO_PAR_PSC0_PAR_CTS0_BCLK             (0x80)
-+#define MCF_GPIO_PAR_PSC0_PAR_CTS0_CTS              (0xC0)
-+#define MCF_GPIO_PAR_PSC0_PAR_RTS0_GPIO             (0x00)
-+#define MCF_GPIO_PAR_PSC0_PAR_RTS0_FSYNC            (0x20)
-+#define MCF_GPIO_PAR_PSC0_PAR_RTS0_RTS              (0x30)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_DSPI */
-+#define MCF_GPIO_PAR_DSPI_PAR_SOUT(x)               (((x)&0x0003)<<0)
-+#define MCF_GPIO_PAR_DSPI_PAR_SIN(x)                (((x)&0x0003)<<2)
-+#define MCF_GPIO_PAR_DSPI_PAR_SCK(x)                (((x)&0x0003)<<4)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS0(x)                (((x)&0x0003)<<6)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS2(x)                (((x)&0x0003)<<8)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS3(x)                (((x)&0x0003)<<10)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS5                   (0x1000)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS3_GPIO              (0x0000)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS3_CANTX             (0x0400)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS3_TOUT              (0x0800)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS3_DSPICS            (0x0C00)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS2_GPIO              (0x0000)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS2_CANTX             (0x0100)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS2_TOUT              (0x0200)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS2_DSPICS            (0x0300)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS0_GPIO              (0x0000)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS0_FSYNC             (0x0040)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS0_RTS               (0x0080)
-+#define MCF_GPIO_PAR_DSPI_PAR_CS0_DSPICS            (0x00C0)
-+#define MCF_GPIO_PAR_DSPI_PAR_SCK_GPIO              (0x0000)
-+#define MCF_GPIO_PAR_DSPI_PAR_SCK_BCLK              (0x0010)
-+#define MCF_GPIO_PAR_DSPI_PAR_SCK_CTS               (0x0020)
-+#define MCF_GPIO_PAR_DSPI_PAR_SCK_SCK               (0x0030)
-+#define MCF_GPIO_PAR_DSPI_PAR_SIN_GPIO              (0x0000)
-+#define MCF_GPIO_PAR_DSPI_PAR_SIN_RXD               (0x0008)
-+#define MCF_GPIO_PAR_DSPI_PAR_SIN_SIN               (0x000C)
-+#define MCF_GPIO_PAR_DSPI_PAR_SOUT_GPIO             (0x0000)
-+#define MCF_GPIO_PAR_DSPI_PAR_SOUT_TXD              (0x0002)
-+#define MCF_GPIO_PAR_DSPI_PAR_SOUT_SOUT             (0x0003)
-+
-+/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */
-+#define MCF_GPIO_PAR_TIMER_PAR_TOUT2                (0x01)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x)              (((x)&0x03)<<1)
-+#define MCF_GPIO_PAR_TIMER_PAR_TOUT3                (0x08)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x)              (((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_CANRX           (0x00)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_IRQ             (0x20)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN             (0x30)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_CANRX           (0x00)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_IRQ             (0x04)
-+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN             (0x06)
-+
-+/********************************************************************/
-+
-+#endif /* _M5485GPIO_H_ */
---- /dev/null
-+++ b/include/asm-m68k/m5485gpt.h
-@@ -0,0 +1,88 @@
-+/*
-+ * File:	mcf548x_gpt.h
-+ * Purpose:	Register and bit definitions for the MCF548X
-+ *
-+ * Notes:	
-+ *	
-+ */
-+
-+#ifndef __MCF548X_GPT_H__
-+#define __MCF548X_GPT_H__
-+
-+/*********************************************************************
-+*
-+* General Purpose Timers (GPT)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_GPT_GMS0       MCF_REG32(0x000800)
-+#define MCF_GPT_GCIR0      MCF_REG32(0x000804)
-+#define MCF_GPT_GPWM0      MCF_REG32(0x000808)
-+#define MCF_GPT_GSR0       MCF_REG32(0x00080C)
-+#define MCF_GPT_GMS1       MCF_REG32(0x000810)
-+#define MCF_GPT_GCIR1      MCF_REG32(0x000814)
-+#define MCF_GPT_GPWM1      MCF_REG32(0x000818)
-+#define MCF_GPT_GSR1       MCF_REG32(0x00081C)
-+#define MCF_GPT_GMS2       MCF_REG32(0x000820)
-+#define MCF_GPT_GCIR2      MCF_REG32(0x000824)
-+#define MCF_GPT_GPWM2      MCF_REG32(0x000828)
-+#define MCF_GPT_GSR2       MCF_REG32(0x00082C)
-+#define MCF_GPT_GMS3       MCF_REG32(0x000830)
-+#define MCF_GPT_GCIR3      MCF_REG32(0x000834)
-+#define MCF_GPT_GPWM3      MCF_REG32(0x000838)
-+#define MCF_GPT_GSR3       MCF_REG32(0x00083C)
-+#define MCF_GPT_GMS(x)     MCF_REG32(0x000800+((x)*0x010))
-+#define MCF_GPT_GCIR(x)    MCF_REG32(0x000804+((x)*0x010))
-+#define MCF_GPT_GPWM(x)    MCF_REG32(0x000808+((x)*0x010))
-+#define MCF_GPT_GSR(x)     MCF_REG32(0x00080C+((x)*0x010))
-+
-+/* Bit definitions and macros for MCF_GPT_GMS */
-+#define MCF_GPT_GMS_TMS(x)         (((x)&0x00000007)<<0)
-+#define MCF_GPT_GMS_GPIO(x)        (((x)&0x00000003)<<4)
-+#define MCF_GPT_GMS_IEN            (0x00000100)
-+#define MCF_GPT_GMS_OD             (0x00000200)
-+#define MCF_GPT_GMS_SC             (0x00000400)
-+#define MCF_GPT_GMS_CE             (0x00001000)
-+#define MCF_GPT_GMS_WDEN           (0x00008000)
-+#define MCF_GPT_GMS_ICT(x)         (((x)&0x00000003)<<16)
-+#define MCF_GPT_GMS_OCT(x)         (((x)&0x00000003)<<20)
-+#define MCF_GPT_GMS_OCPW(x)        (((x)&0x000000FF)<<24)
-+#define MCF_GPT_GMS_OCT_FRCLOW     (0x00000000)
-+#define MCF_GPT_GMS_OCT_PULSEHI    (0x00100000)
-+#define MCF_GPT_GMS_OCT_PULSELO    (0x00200000)
-+#define MCF_GPT_GMS_OCT_TOGGLE     (0x00300000)
-+#define MCF_GPT_GMS_ICT_ANY        (0x00000000)
-+#define MCF_GPT_GMS_ICT_RISE       (0x00010000)
-+#define MCF_GPT_GMS_ICT_FALL       (0x00020000)
-+#define MCF_GPT_GMS_ICT_PULSE      (0x00030000)
-+#define MCF_GPT_GMS_GPIO_INPUT     (0x00000000)
-+#define MCF_GPT_GMS_GPIO_OUTLO     (0x00000020)
-+#define MCF_GPT_GMS_GPIO_OUTHI     (0x00000030)
-+#define MCF_GPT_GMS_TMS_DISABLE    (0x00000000)
-+#define MCF_GPT_GMS_TMS_INCAPT     (0x00000001)
-+#define MCF_GPT_GMS_TMS_OUTCAPT    (0x00000002)
-+#define MCF_GPT_GMS_TMS_PWM        (0x00000003)
-+#define MCF_GPT_GMS_TMS_GPIO       (0x00000004)
-+
-+/* Bit definitions and macros for MCF_GPT_GCIR */
-+#define MCF_GPT_GCIR_CNT(x)        (((x)&0x0000FFFF)<<0)
-+#define MCF_GPT_GCIR_PRE(x)        (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_GPT_GPWM */
-+#define MCF_GPT_GPWM_LOAD          (0x00000001)
-+#define MCF_GPT_GPWM_PWMOP         (0x00000100)
-+#define MCF_GPT_GPWM_WIDTH(x)      (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_GPT_GSR */
-+#define MCF_GPT_GSR_CAPT           (0x00000001)
-+#define MCF_GPT_GSR_COMP           (0x00000002)
-+#define MCF_GPT_GSR_PWMP           (0x00000004)
-+#define MCF_GPT_GSR_TEXP           (0x00000008)
-+#define MCF_GPT_GSR_PIN            (0x00000100)
-+#define MCF_GPT_GSR_OVF(x)         (((x)&0x00000007)<<12)
-+#define MCF_GPT_GSR_CAPTURE(x)     (((x)&0x0000FFFF)<<16)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF548X_GPT_H__ */
---- /dev/null
-+++ b/include/asm-m68k/m5485i2c.h
-@@ -0,0 +1,45 @@
-+/*
-+ *	m5485i2c.h -- ColdFire 547x/548x i2c controller support.
-+ */
-+#ifndef M548X_I2C_H
-+#define M548X_I2C_H
-+
-+/* Register read/write macros */
-+#define MCF_I2AR     MCF_REG08(0x008F00)	/* I2C Address 		 */
-+#define MCF_I2FDR    MCF_REG08(0x008F04)	/* I2C Frequency Divider */
-+#define MCF_I2CR     MCF_REG08(0x008F08)	/* I2C Control		 */
-+#define MCF_I2SR     MCF_REG08(0x008F0C)	/* I2C Status		 */
-+#define MCF_I2DR     MCF_REG08(0x008F10)	/* I2C Data I/O		 */
-+#define MCF_I2ICR    MCF_REG08(0x008F20)	/* I2C Interrupt Control */
-+
-+/* Bit definitions and macros for MCF_I2C_I2AR */
-+#define MCF_I2AR_ADR(x)    (((x)&0x7F)<<1)
-+
-+/* Bit definitions and macros for MCF_I2C_I2FDR */
-+#define MCF_I2FDR_IC(x)    (((x)&0x3F)<<0)
-+
-+/* Bit definitions and macros for MCF_I2C_I2CR */
-+#define MCF_I2CR_RSTA      (0x04)
-+#define MCF_I2CR_TXAK      (0x08)
-+#define MCF_I2CR_MTX       (0x10)
-+#define MCF_I2CR_MSTA      (0x20)
-+#define MCF_I2CR_IIEN      (0x40)
-+#define MCF_I2CR_IEN       (0x80)
-+
-+/* Bit definitions and macros for MCF_I2C_I2SR */
-+#define MCF_I2SR_RXAK      (0x01)
-+#define MCF_I2SR_IIF       (0x02)
-+#define MCF_I2SR_SRW       (0x04)
-+#define MCF_I2SR_IAL       (0x10)
-+#define MCF_I2SR_IBB       (0x20)
-+#define MCF_I2SR_IAAS      (0x40)
-+#define MCF_I2SR_ICF       (0x80)
-+
-+/* Bit definitions and macros for MCF_I2C_I2ICR */
-+#define MCF_I2ICR_IE       (0x01)
-+#define MCF_I2ICR_RE       (0x02)
-+#define MCF_I2ICR_TE       (0x04)
-+#define MCF_I2ICR_BNBE     (0x08)
-+
-+/********************************************************************/
-+#endif
---- /dev/null
-+++ b/include/asm-m68k/m5485pci.h
-@@ -0,0 +1,330 @@
-+/*
-+ *	m5485pci.h -- ColdFire 547x/548x PCI controller support.
-+ */
-+#ifndef __MCF548X_PCI_H__
-+#define __MCF548X_PCI_H__
-+
-+
-+/* PCI Type 0 Configuration Registers */
-+#define MCF_PCIIDR        MCF_REG32(0x000B00)   /* PCI Device ID/Vendor ID      */
-+#define MCF_PCISCR        MCF_REG32(0x000B04)   /* PCI Status/Command           */
-+#define MCF_PCICCRIR      MCF_REG32(0x000B08)   /* PCI Class Code / Revision ID */
-+#define MCF_PCICR1        MCF_REG32(0x000B0C)   /* PCI Configuration 1 Register */
-+#define MCF_PCIBAR0       MCF_REG32(0x000B10)   /* PCI Base Address Register 0  */
-+#define MCF_PCIBAR1       MCF_REG32(0x000B14)   /* PCI Base Address Register 1  */
-+#define MCF_PCICCPR       MCF_REG32(0x000B28)   /* PCI Cardbus CIS Pointer      */
-+#define MCF_PCISID        MCF_REG32(0x000B2C)   /* Subsystem ID/Subsystem Vendor ID*/
-+#define MCF_PCIERBAR      MCF_REG32(0x000B30)   /* PCI Expansion ROM            */
-+#define MCF_PCICPR        MCF_REG32(0x000B30)   /* PCI Capabilities Pointer     */
-+#define MCF_PCICR2        MCF_REG32(0x000B3C)   /* PCI Configuration Register 2 */
-+
-+/* General Control/Status Registers */
-+#define MCF_PCIGSCR       MCF_REG32(0x000B60)   /* Global Status/Control Register   */
-+#define MCF_PCITBATR0     MCF_REG32(0x000B64)   /* Target Base Address Translation 0*/
-+#define MCF_PCITBATR1     MCF_REG32(0x000B68)   /* Target Base Address Translation 1*/
-+#define MCF_PCITCR        MCF_REG32(0x000B6C)   /* Target Control Register          */
-+#define MCF_PCIIW0BTAR    MCF_REG32(0x000B70)   /* Initiator Window 0 Base Address  */
-+#define MCF_PCIIW1BTAR    MCF_REG32(0x000B74)   /* Initiator Window 1 Base Address  */
-+#define MCF_PCIIW2BTAR    MCF_REG32(0x000B78)   /* Initiator Window 2 Base  Address */
-+#define MCF_PCIIWCR       MCF_REG32(0x000B80)   /* Initiator Window Configuration   */
-+#define MCF_PCIICR        MCF_REG32(0x000B84)   /* Initiator Control Register       */
-+#define MCF_PCIISR        MCF_REG32(0x000B88)   /* Initiator Status Register        */
-+#define MCF_PCICAR        MCF_REG32(0x000BF8)   /* Configuration Address Register   */
-+
-+/* CommBus FIFO Transmit Interface Registers */
-+#define MCF_PCITPSR       MCF_REG32(0x008400)   /* Tx Packet Size Register      	*/
-+#define MCF_PCITSAR       MCF_REG32(0x008404)   /* Tx Start Address Register        */
-+#define MCF_PCITTCR       MCF_REG32(0x008408)   /* Tx Transaction Control Register  */
-+#define MCF_PCITER        MCF_REG32(0x00840C)   /* Tx Enables Register          	*/
-+#define MCF_PCITNAR       MCF_REG32(0x008410)   /* Tx Next Address Register         */
-+#define MCF_PCITLWR       MCF_REG32(0x008414)   /* Tx Last Word Register        	*/
-+#define MCF_PCITDCR       MCF_REG32(0x008418)   /* Tx Done Counts Register          */
-+#define MCF_PCITSR        MCF_REG32(0x00841C)   /* Tx Status Register           	*/
-+#define MCF_PCITFDR       MCF_REG32(0x008440)   /* Tx FIFO Data Register        	*/
-+#define MCF_PCITFSR       MCF_REG32(0x008444)   /* Tx FIFO Status Register          */
-+#define MCF_PCITFCR       MCF_REG32(0x008448)   /* Tx FIFO Control Register         */
-+#define MCF_PCITFAR       MCF_REG32(0x00844C)   /* Tx FIFO Alarm Register       	*/
-+#define MCF_PCITFRPR      MCF_REG32(0x008450)   /* Tx FIFO Read Pointer Register    */
-+#define MCF_PCITFWPR      MCF_REG32(0x008454)   /* Tx FIFO Write Pointer Register   */
-+
-+/* CommBus FIFO Receive Interface Registers */
-+#define MCF_PCIRPSR       MCF_REG32(0x008480)   /* Tx Packet Size Register      	*/
-+#define MCF_PCIRSAR       MCF_REG32(0x008484)   /* Tx Start Address Register        */
-+#define MCF_PCIRTCR       MCF_REG32(0x008488)   /* Tx Transaction Control Register  */
-+#define MCF_PCIRER        MCF_REG32(0x00848C)   /* Tx Enables Register          	*/
-+#define MCF_PCIRNAR       MCF_REG32(0x008490)   /* Tx Next Address Register         */
-+#define MCF_PCIRDCR       MCF_REG32(0x008498)   /* Tx Done Counts Register          */
-+#define MCF_PCIRSR        MCF_REG32(0x00849C)   /* Tx Status Register           	*/
-+#define MCF_PCIRFDR       MCF_REG32(0x0084C0)   /* Tx FIFO Data Register        	*/
-+#define MCF_PCIRFSR       MCF_REG32(0x0084C4)   /* Tx FIFO Status Register          */
-+#define MCF_PCIRFCR       MCF_REG32(0x0084C8)   /* Tx FIFO Control Register         */
-+#define MCF_PCIRFAR       MCF_REG32(0x0084CC)   /* Tx FIFO Alarm Register       	*/
-+#define MCF_PCIRFRPR      MCF_REG32(0x0084D0)   /* Tx FIFO Read Pointer Register    */
-+#define MCF_PCIRFWPR      MCF_REG32(0x0084D4)   /* Tx FIFO Write Pointer Register   */
-+
-+/* PCI Arbiter Registers */
-+#define MCF_PCIARB_PACR   MCF_REG32(0x000C00)
-+#define MCF_PCIARB_PASR   MCF_REG32(0x000C04)
-+
-+
-+/* Bit definitions and macros for MCF_PCIIDR */
-+#define MCF_PCIIDR_VENDORID(x)            (((x)&0x0000FFFF)<<0)
-+#define MCF_PCIIDR_DEVICEID(x)            (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_PCISCR */
-+#define MCF_PCISCR_M      (0x00000002)
-+#define MCF_PCISCR_B      (0x00000004)
-+#define MCF_PCISCR_SP     (0x00000008)
-+#define MCF_PCISCR_MW     (0x00000010)
-+#define MCF_PCISCR_PER    (0x00000040)
-+#define MCF_PCISCR_S      (0x00000100)
-+#define MCF_PCISCR_F      (0x00000200)
-+#define MCF_PCISCR_C      (0x00100000)
-+#define MCF_PCISCR_66M    (0x00200000)
-+#define MCF_PCISCR_R      (0x00400000)
-+#define MCF_PCISCR_FC     (0x00800000)
-+#define MCF_PCISCR_DP     (0x01000000)
-+#define MCF_PCISCR_DT(x)  (((x)&0x00000003)<<25)
-+#define MCF_PCISCR_TS     (0x08000000)
-+#define MCF_PCISCR_TR     (0x10000000)
-+#define MCF_PCISCR_MA     (0x20000000)
-+#define MCF_PCISCR_SE     (0x40000000)
-+#define MCF_PCISCR_PE     (0x80000000)
-+
-+/* Bit definitions and macros for MCF_PCICCRIR */
-+#define MCF_PCICCRIR_REVID(x)             (((x)&0x000000FF)<<0)
-+#define MCF_PCICCRIR_CLASSCODE(x)         (((x)&0x00FFFFFF)<<8)
-+
-+/* Bit definitions and macros for MCF_PCICR1 */
-+#define MCF_PCICR1_CACHELINESIZE(x)       (((x)&0x0000000F)<<0)
-+#define MCF_PCICR1_LATTIMER(x)            (((x)&0x000000FF)<<8)
-+#define MCF_PCICR1_HEADERTYPE(x)          (((x)&0x000000FF)<<16)
-+#define MCF_PCICR1_BIST(x)                (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for MCF_PCIBAR# */
-+#define MCF_PCIBAR0_ADDR(x)               (((x)&0x00003FFF)<<18)
-+#define MCF_PCIBAR1_ADDR(x)               (((x)&0x00000003)<<30)
-+
-+/* Bit definitions and macros for MCF_PCICR2 */
-+#define MCF_PCICR2_INTLINE(x)             (((x)&0x000000FF)<<0)
-+#define MCF_PCICR2_INTPIN(x)              (((x)&0x000000FF)<<8)
-+#define MCF_PCICR2_MINGNT(x)              (((x)&0x000000FF)<<16)
-+#define MCF_PCICR2_MAXLAT(x)              (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for MCF_PCIGSCR */
-+#define MCF_PCIGSCR_PR                    (0x00000001)
-+#define MCF_PCIGSCR_SEE                   (0x00001000)
-+#define MCF_PCIGSCR_PEE                   (0x00002000)
-+#define MCF_PCIGSCR_SE                    (0x10000000)
-+#define MCF_PCIGSCR_PE                    (0x20000000)
-+
-+/* Bit definitions and macros for MCF_PCITBATR0 */
-+#define MCF_PCITBATR0_EN                  (0x00000001)
-+#define MCF_PCITBATR0_BAT0(x)             (((x)&0x00003FFF)<<18)
-+
-+/* Bit definitions and macros for MCF_PCITBATR1 */
-+#define MCF_PCITBATR1_EN                  (0x00000001)
-+#define MCF_PCITBATR1_BAT1(x)             (((x)&0x00000003)<<30)
-+
-+/* Bit definitions and macros for MCF_PCITCR */
-+#define MCF_PCITCR_P                      (0x00010000)
-+#define MCF_PCITCR_LD                     (0x01000000)
-+
-+/* Bit definitions and macros for MCF_PCIIW0BTAR */
-+#define MCF_PCIIW0BTAR_WTA0(x)            (((x)&0x000000FF)<<8)
-+#define MCF_PCIIW0BTAR_WAM0(x)            (((x)&0x000000FF)<<16)
-+#define MCF_PCIIW0BTAR_WBA0(x)            (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for MCF_PCIIW1BTAR */
-+#define MCF_PCIIW1BTAR_WTA1(x)            (((x)&0x000000FF)<<8)
-+#define MCF_PCIIW1BTAR_WAM1(x)            (((x)&0x000000FF)<<16)
-+#define MCF_PCIIW1BTAR_WBA1(x)            (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for MCF_PCIIW2BTAR */
-+#define MCF_PCIIW2BTAR_WTA2(x)            (((x)&0x000000FF)<<8)
-+#define MCF_PCIIW2BTAR_WAM2(x)            (((x)&0x000000FF)<<16)
-+#define MCF_PCIIW2BTAR_WBA2(x)            (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for MCF_PCIIWCR */
-+#define MCF_PCIIWCR_WINCTRL2(x)           (((x)&0x0000000F)<<8)
-+#define MCF_PCIIWCR_WINCTRL1(x)           (((x)&0x0000000F)<<16)
-+#define MCF_PCIIWCR_WINCTRL0(x)           (((x)&0x0000000F)<<24)
-+#define MCF_PCIIWCR_WINCTRL0_MEMREAD      (0x01000000)
-+#define MCF_PCIIWCR_WINCTRL0_MEMRDLINE    (0x03000000)
-+#define MCF_PCIIWCR_WINCTRL0_MEMRDMUL     (0x05000000)
-+#define MCF_PCIIWCR_WINCTRL0_IO           (0x09000000)
-+#define MCF_PCIIWCR_WINCTRL0_E            (0x01000000)
-+#define MCF_PCIIWCR_WINCTRL1_MEMREAD      (0x00010000)
-+#define MCF_PCIIWCR_WINCTRL1_MEMRDLINE    (0x00030000)
-+#define MCF_PCIIWCR_WINCTRL1_MEMRDMUL     (0x00050000)
-+#define MCF_PCIIWCR_WINCTRL1_IO           (0x00090000)
-+#define MCF_PCIIWCR_WINCTRL1_E            (0x00010000)
-+#define MCF_PCIIWCR_WINCTRL2_MEMREAD      (0x00000100)
-+#define MCF_PCIIWCR_WINCTRL2_MEMRDLINE    (0x00000300)
-+#define MCF_PCIIWCR_WINCTRL2_MEMRDMUL     (0x00000500)
-+#define MCF_PCIIWCR_WINCTRL2_IO           (0x00000900)
-+#define MCF_PCIIWCR_WINCTRL2_E            (0x00000100)
-+
-+
-+/* Bit definitions and macros for MCF_PCIICR */
-+#define MCF_PCIICR_MAXRETRY(x)            (((x)&0x000000FF)<<0)
-+#define MCF_PCIICR_TAE                    (0x01000000)
-+#define MCF_PCIICR_IAE                    (0x02000000)
-+#define MCF_PCIICR_REE                    (0x04000000)
-+
-+/* Bit definitions and macros for MCF_PCIISR */
-+#define MCF_PCIISR_TA                     (0x01000000)
-+#define MCF_PCIISR_IA                     (0x02000000)
-+#define MCF_PCIISR_RE                     (0x04000000)
-+
-+/* Bit definitions and macros for MCF_PCICAR */
-+#define MCF_PCICAR_DWORD(x)               (((x)&0x0000003F)<<2)
-+#define MCF_PCICAR_FUNCNUM(x)             (((x)&0x00000007)<<8)
-+#define MCF_PCICAR_DEVNUM(x)              (((x)&0x0000001F)<<11)
-+#define MCF_PCICAR_BUSNUM(x)              (((x)&0x000000FF)<<16)
-+#define MCF_PCICAR_E                      (0x80000000)
-+
-+/* Bit definitions and macros for MCF_PCITPSR */
-+#define MCF_PCITPSR_PKTSIZE(x)            (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_PCITTCR */
-+#define MCF_PCITTCR_DI                    (0x00000001)
-+#define MCF_PCITTCR_W                     (0x00000010)
-+#define MCF_PCITTCR_MAXBEATS(x)           (((x)&0x00000007)<<8)
-+#define MCF_PCITTCR_MAXRETRY(x)           (((x)&0x000000FF)<<16)
-+#define MCF_PCITTCR_PCICMD(x)             (((x)&0x0000000F)<<24)
-+
-+/* Bit definitions and macros for MCF_PCITER */
-+#define MCF_PCITER_NE                     (0x00010000)
-+#define MCF_PCITER_IAE                    (0x00020000)
-+#define MCF_PCITER_TAE                    (0x00040000)
-+#define MCF_PCITER_RE                     (0x00080000)
-+#define MCF_PCITER_SE                     (0x00100000)
-+#define MCF_PCITER_FEE                    (0x00200000)
-+#define MCF_PCITER_ME                     (0x01000000)
-+#define MCF_PCITER_BE                     (0x08000000)
-+#define MCF_PCITER_CM                     (0x10000000)
-+#define MCF_PCITER_RF                     (0x40000000)
-+#define MCF_PCITER_RC                     (0x80000000)
-+
-+/* Bit definitions and macros for MCF_PCITDCR */
-+#define MCF_PCITDCR_PKTSDONE(x)           (((x)&0x0000FFFF)<<0)
-+#define MCF_PCITDCR_BYTESDONE(x)          (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_PCITSR */
-+#define MCF_PCITSR_IA                     (0x00010000)
-+#define MCF_PCITSR_TA                     (0x00020000)
-+#define MCF_PCITSR_RE                     (0x00040000)
-+#define MCF_PCITSR_SE                     (0x00080000)
-+#define MCF_PCITSR_FE                     (0x00100000)
-+#define MCF_PCITSR_BE1                    (0x00200000)
-+#define MCF_PCITSR_BE2                    (0x00400000)
-+#define MCF_PCITSR_BE3                    (0x00800000)
-+#define MCF_PCITSR_NT                     (0x01000000)
-+
-+/* Bit definitions and macros for MCF_PCITFSR */
-+#define MCF_PCITFSR_EMT                   (0x00010000)
-+#define MCF_PCITFSR_ALARM                 (0x00020000)
-+#define MCF_PCITFSR_FU                    (0x00040000)
-+#define MCF_PCITFSR_FR                    (0x00080000)
-+#define MCF_PCITFSR_OF                    (0x00100000)
-+#define MCF_PCITFSR_UF                    (0x00200000)
-+#define MCF_PCITFSR_RXW                   (0x00400000)
-+
-+/* Bit definitions and macros for MCF_PCITFCR */
-+#define MCF_PCITFCR_OF_MSK                (0x00080000)
-+#define MCF_PCITFCR_UF_MSK                (0x00100000)
-+#define MCF_PCITFCR_RXW_MSK               (0x00200000)
-+#define MCF_PCITFCR_FAE_MSK               (0x00400000)
-+#define MCF_PCITFCR_IP_MSK                (0x00800000)
-+#define MCF_PCITFCR_GR(x)                 (((x)&0x00000007)<<24)
-+
-+/* Bit definitions and macros for MCF_PCITFAR */
-+#define MCF_PCITFAR_ALARM(x)              (((x)&0x0000007F)<<0)
-+
-+/* Bit definitions and macros for MCF_PCITFRPR */
-+#define MCF_PCITFRPR_READ(x)              (((x)&0x00000FFF)<<0)
-+
-+/* Bit definitions and macros for MCF_PCITFWPR */
-+#define MCF_PCITFWPR_WRITE(x)             (((x)&0x00000FFF)<<0)
-+
-+/* Bit definitions and macros for MCF_PCIRPSR */
-+#define MCF_PCIRPSR_PKTSIZE(x)            (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_PCIRTCR */
-+#define MCF_PCIRTCR_DI                    (0x00000001)
-+#define MCF_PCIRTCR_W                     (0x00000010)
-+#define MCF_PCIRTCR_MAXBEATS(x)           (((x)&0x00000007)<<8)
-+#define MCF_PCIRTCR_FB                    (0x00001000)
-+#define MCF_PCIRTCR_MAXRETRY(x)           (((x)&0x000000FF)<<16)
-+#define MCF_PCIRTCR_PCICMD(x)             (((x)&0x0000000F)<<24)
-+
-+/* Bit definitions and macros for MCF_PCIRER */
-+#define MCF_PCIRER_NE                     (0x00010000)
-+#define MCF_PCIRER_IAE                    (0x00020000)
-+#define MCF_PCIRER_TAE                    (0x00040000)
-+#define MCF_PCIRER_RE                     (0x00080000)
-+#define MCF_PCIRER_SE                     (0x00100000)
-+#define MCF_PCIRER_FEE                    (0x00200000)
-+#define MCF_PCIRER_ME                     (0x01000000)
-+#define MCF_PCIRER_BE                     (0x08000000)
-+#define MCF_PCIRER_CM                     (0x10000000)
-+#define MCF_PCIRER_FE                     (0x20000000)
-+#define MCF_PCIRER_RF                     (0x40000000)
-+#define MCF_PCIRER_RC                     (0x80000000)
-+
-+/* Bit definitions and macros for MCF_PCIRDCR */
-+#define MCF_PCIRDCR_PKTSDONE(x)           (((x)&0x0000FFFF)<<0)
-+#define MCF_PCIRDCR_BYTESDONE(x)          (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_PCIRSR */
-+#define MCF_PCIRSR_IA                     (0x00010000)
-+#define MCF_PCIRSR_TA                     (0x00020000)
-+#define MCF_PCIRSR_RE                     (0x00040000)
-+#define MCF_PCIRSR_SE                     (0x00080000)
-+#define MCF_PCIRSR_FE                     (0x00100000)
-+#define MCF_PCIRSR_BE1                    (0x00200000)
-+#define MCF_PCIRSR_BE2                    (0x00400000)
-+#define MCF_PCIRSR_BE3                    (0x00800000)
-+#define MCF_PCIRSR_NT                     (0x01000000)
-+
-+/* Bit definitions and macros for MCF_PCIRFSR */
-+#define MCF_PCIRFSR_EMT                   (0x00010000)
-+#define MCF_PCIRFSR_ALARM                 (0x00020000)
-+#define MCF_PCIRFSR_FU                    (0x00040000)
-+#define MCF_PCIRFSR_FR                    (0x00080000)
-+#define MCF_PCIRFSR_OF                    (0x00100000)
-+#define MCF_PCIRFSR_UF                    (0x00200000)
-+#define MCF_PCIRFSR_RXW                   (0x00400000)
-+
-+/* Bit definitions and macros for MCF_PCIRFCR */
-+#define MCF_PCIRFCR_OF_MSK                (0x00080000)
-+#define MCF_PCIRFCR_UF_MSK                (0x00100000)
-+#define MCF_PCIRFCR_RXW_MSK               (0x00200000)
-+#define MCF_PCIRFCR_FAE_MSK               (0x00400000)
-+#define MCF_PCIRFCR_IP_MSK                (0x00800000)
-+#define MCF_PCIRFCR_GR(x)                 (((x)&0x00000007)<<24)
-+
-+/* Bit definitions and macros for MCF_PCIRFAR */
-+#define MCF_PCIRFAR_ALARM(x)              (((x)&0x0000007F)<<0)
-+
-+/* Bit definitions and macros for MCF_PCIRFRPR */
-+#define MCF_PCIRFRPR_READ(x)              (((x)&0x00000FFF)<<0)
-+
-+/* Bit definitions and macros for MCF_PCIRFWPR */
-+#define MCF_PCIRFWPR_WRITE(x)             (((x)&0x00000FFF)<<0)
-+
-+
-+/* Bit definitions and macros for MCF_PCIARB_PACR */
-+#define MCF_PCIARB_PACR_INTMPRI         (0x00000001)
-+#define MCF_PCIARB_PACR_EXTMPRI(x)      (((x)&0x0000001F)<<1)
-+#define MCF_PCIARB_PACR_INTMINTEN       (0x00010000)
-+#define MCF_PCIARB_PACR_EXTMINTEN(x)    (((x)&0x0000001F)<<17)
-+#define MCF_PCIARB_PACR_PKMD            (0x40000000)
-+#define MCF_PCIARB_PACR_DS              (0x80000000)
-+
-+/* Bit definitions and macros for MCF_PCIARB_PASR */
-+#define MCF_PCIARB_PASR_ITLMBK          (0x00010000)
-+#define MCF_PCIARB_PASR_EXTMBK(x)       (((x)&0x0000001F)<<17)
-+
-+#endif /* __MCF548X_PCI_H__ */
---- /dev/null
-+++ b/include/asm-m68k/m5485psc.h
-@@ -0,0 +1,474 @@
-+/*
-+ * File:	mcf548x_psc.h
-+ * Purpose:	Register and bit definitions for the MCF548X
-+ *
-+ * Notes:	
-+ *	
-+ */
-+
-+#ifndef __MCF548X_PSC_H__
-+#define __MCF548X_PSC_H__
-+
-+/*********************************************************************
-+*
-+* Programmable Serial Controller (PSC)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_PSC_MR0            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008600))
-+#define MCF_PSC_SR0            (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008604))
-+#define MCF_PSC_CSR0           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008604))
-+#define MCF_PSC_CR0            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008608))
-+#define MCF_PSC_RB0            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C))
-+#define MCF_PSC_TB0            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C))
-+#define MCF_PSC_TB_8BIT0       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C))
-+#define MCF_PSC_TB_16BIT0      (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C))
-+#define MCF_PSC_TB_AC970       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C))
-+#define MCF_PSC_IPCR0          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610))
-+#define MCF_PSC_ACR0           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610))
-+#define MCF_PSC_ISR0           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614))
-+#define MCF_PSC_IMR0           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614))
-+#define MCF_PSC_CTUR0          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008618))
-+#define MCF_PSC_CTLR0          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00861C))
-+#define MCF_PSC_IP0            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008634))
-+#define MCF_PSC_OPSET0         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008638))
-+#define MCF_PSC_OPRESET0       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00863C))
-+#define MCF_PSC_SICR0          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008640))
-+#define MCF_PSC_IRCR10         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008644))
-+#define MCF_PSC_IRCR20         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008648))
-+#define MCF_PSC_IRSDR0         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00864C))
-+#define MCF_PSC_IRMDR0         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008650))
-+#define MCF_PSC_IRFDR0         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008654))
-+#define MCF_PSC_RFCNT0         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008658))
-+#define MCF_PSC_TFCNT0         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00865C))
-+#define MCF_PSC_RFSR0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008664))
-+#define MCF_PSC_TFSR0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008684))
-+#define MCF_PSC_RFCR0          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008668))
-+#define MCF_PSC_TFCR0          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008688))
-+#define MCF_PSC_RFAR0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00866E))
-+#define MCF_PSC_TFAR0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00868E))
-+#define MCF_PSC_RFRP0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008672))
-+#define MCF_PSC_TFRP0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008692))
-+#define MCF_PSC_RFWP0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008676))
-+#define MCF_PSC_TFWP0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008696))
-+#define MCF_PSC_RLRFP0         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867A))
-+#define MCF_PSC_TLRFP0         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869A))
-+#define MCF_PSC_RLWFP0         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867E))
-+#define MCF_PSC_TLWFP0         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869E))
-+#define MCF_PSC_MR1            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008700))
-+#define MCF_PSC_SR1            (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008704))
-+#define MCF_PSC_CSR1           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008704))
-+#define MCF_PSC_CR1            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008708))
-+#define MCF_PSC_RB1            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C))
-+#define MCF_PSC_TB1            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C))
-+#define MCF_PSC_TB_8BIT1       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C))
-+#define MCF_PSC_TB_16BIT1      (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C))
-+#define MCF_PSC_TB_AC971       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C))
-+#define MCF_PSC_IPCR1          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008710))
-+#define MCF_PSC_ACR1           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008710))
-+#define MCF_PSC_ISR1           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008714))
-+#define MCF_PSC_IMR1           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008714))
-+#define MCF_PSC_CTUR1          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008718))
-+#define MCF_PSC_CTLR1          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00871C))
-+#define MCF_PSC_IP1            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008734))
-+#define MCF_PSC_OPSET1         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008738))
-+#define MCF_PSC_OPRESET1       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00873C))
-+#define MCF_PSC_SICR1          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008740))
-+#define MCF_PSC_IRCR11         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008744))
-+#define MCF_PSC_IRCR21         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008748))
-+#define MCF_PSC_IRSDR1         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00874C))
-+#define MCF_PSC_IRMDR1         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008750))
-+#define MCF_PSC_IRFDR1         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008754))
-+#define MCF_PSC_RFCNT1         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008758))
-+#define MCF_PSC_TFCNT1         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00875C))
-+#define MCF_PSC_RFSR1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008764))
-+#define MCF_PSC_TFSR1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008784))
-+#define MCF_PSC_RFCR1          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008768))
-+#define MCF_PSC_TFCR1          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008788))
-+#define MCF_PSC_RFAR1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00876E))
-+#define MCF_PSC_TFAR1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00878E))
-+#define MCF_PSC_RFRP1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008772))
-+#define MCF_PSC_TFRP1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008792))
-+#define MCF_PSC_RFWP1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008776))
-+#define MCF_PSC_TFWP1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008796))
-+#define MCF_PSC_RLRFP1         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00877A))
-+#define MCF_PSC_TLRFP1         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00879A))
-+#define MCF_PSC_RLWFP1         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00877E))
-+#define MCF_PSC_TLWFP1         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00879E))
-+#define MCF_PSC_MR2            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008800))
-+#define MCF_PSC_SR2            (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008804))
-+#define MCF_PSC_CSR2           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008804))
-+#define MCF_PSC_CR2            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008808))
-+#define MCF_PSC_RB2            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C))
-+#define MCF_PSC_TB2            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C))
-+#define MCF_PSC_TB_8BIT2       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C))
-+#define MCF_PSC_TB_16BIT2      (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C))
-+#define MCF_PSC_TB_AC972       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C))
-+#define MCF_PSC_IPCR2          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008810))
-+#define MCF_PSC_ACR2           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008810))
-+#define MCF_PSC_ISR2           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008814))
-+#define MCF_PSC_IMR2           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008814))
-+#define MCF_PSC_CTUR2          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008818))
-+#define MCF_PSC_CTLR2          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00881C))
-+#define MCF_PSC_IP2            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008834))
-+#define MCF_PSC_OPSET2         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008838))
-+#define MCF_PSC_OPRESET2       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00883C))
-+#define MCF_PSC_SICR2          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008840))
-+#define MCF_PSC_IRCR12         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008844))
-+#define MCF_PSC_IRCR22         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008848))
-+#define MCF_PSC_IRSDR2         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00884C))
-+#define MCF_PSC_IRMDR2         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008850))
-+#define MCF_PSC_IRFDR2         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008854))
-+#define MCF_PSC_RFCNT2         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008858))
-+#define MCF_PSC_TFCNT2         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00885C))
-+#define MCF_PSC_RFSR2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008864))
-+#define MCF_PSC_TFSR2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008884))
-+#define MCF_PSC_RFCR2          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008868))
-+#define MCF_PSC_TFCR2          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008888))
-+#define MCF_PSC_RFAR2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00886E))
-+#define MCF_PSC_TFAR2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00888E))
-+#define MCF_PSC_RFRP2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008872))
-+#define MCF_PSC_TFRP2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008892))
-+#define MCF_PSC_RFWP2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008876))
-+#define MCF_PSC_TFWP2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008896))
-+#define MCF_PSC_RLRFP2         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00887A))
-+#define MCF_PSC_TLRFP2         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00889A))
-+#define MCF_PSC_RLWFP2         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00887E))
-+#define MCF_PSC_TLWFP2         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00889E))
-+#define MCF_PSC_MR3            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008900))
-+#define MCF_PSC_SR3            (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008904))
-+#define MCF_PSC_CSR3           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008904))
-+#define MCF_PSC_CR3            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008908))
-+#define MCF_PSC_RB3            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C))
-+#define MCF_PSC_TB3            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C))
-+#define MCF_PSC_TB_8BIT3       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C))
-+#define MCF_PSC_TB_16BIT3      (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C))
-+#define MCF_PSC_TB_AC973       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C))
-+#define MCF_PSC_IPCR3          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008910))
-+#define MCF_PSC_ACR3           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008910))
-+#define MCF_PSC_ISR3           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008914))
-+#define MCF_PSC_IMR3           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008914))
-+#define MCF_PSC_CTUR3          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008918))
-+#define MCF_PSC_CTLR3          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00891C))
-+#define MCF_PSC_IP3            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008934))
-+#define MCF_PSC_OPSET3         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008938))
-+#define MCF_PSC_OPRESET3       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00893C))
-+#define MCF_PSC_SICR3          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008940))
-+#define MCF_PSC_IRCR13         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008944))
-+#define MCF_PSC_IRCR23         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008948))
-+#define MCF_PSC_IRSDR3         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00894C))
-+#define MCF_PSC_IRMDR3         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008950))
-+#define MCF_PSC_IRFDR3         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008954))
-+#define MCF_PSC_RFCNT3         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008958))
-+#define MCF_PSC_TFCNT3         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00895C))
-+#define MCF_PSC_RFSR3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008964))
-+#define MCF_PSC_TFSR3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008984))
-+#define MCF_PSC_RFCR3          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008968))
-+#define MCF_PSC_TFCR3          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008988))
-+#define MCF_PSC_RFAR3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00896E))
-+#define MCF_PSC_TFAR3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00898E))
-+#define MCF_PSC_RFRP3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008972))
-+#define MCF_PSC_TFRP3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008992))
-+#define MCF_PSC_RFWP3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008976))
-+#define MCF_PSC_TFWP3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008996))
-+#define MCF_PSC_RLRFP3         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00897A))
-+#define MCF_PSC_TLRFP3         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00899A))
-+#define MCF_PSC_RLWFP3         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00897E))
-+#define MCF_PSC_TLWFP3         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00899E))
-+#define MCF_PSC_MR(x)          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008600+((x)*0x100)))
-+#define MCF_PSC_SR(x)          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008604+((x)*0x100)))
-+#define MCF_PSC_CSR(x)         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008604+((x)*0x100)))
-+#define MCF_PSC_CR(x)          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008608+((x)*0x100)))
-+#define MCF_PSC_RB(x)          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100)))
-+#define MCF_PSC_TB(x)          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100)))
-+#define MCF_PSC_TB_8BIT(x)     (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100)))
-+#define MCF_PSC_TB_16BIT(x)    (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100)))
-+#define MCF_PSC_TB_AC97(x)     (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100)))
-+#define MCF_PSC_IPCR(x)        (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610+((x)*0x100)))
-+#define MCF_PSC_ACR(x)         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610+((x)*0x100)))
-+#define MCF_PSC_ISR(x)         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614+((x)*0x100)))
-+#define MCF_PSC_IMR(x)         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614+((x)*0x100)))
-+#define MCF_PSC_CTUR(x)        (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008618+((x)*0x100)))
-+#define MCF_PSC_CTLR(x)        (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00861C+((x)*0x100)))
-+#define MCF_PSC_IP(x)          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008634+((x)*0x100)))
-+#define MCF_PSC_OPSET(x)       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008638+((x)*0x100)))
-+#define MCF_PSC_OPRESET(x)     (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00863C+((x)*0x100)))
-+#define MCF_PSC_SICR(x)        (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008640+((x)*0x100)))
-+#define MCF_PSC_IRCR1(x)       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008644+((x)*0x100)))
-+#define MCF_PSC_IRCR2(x)       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008648+((x)*0x100)))
-+#define MCF_PSC_IRSDR(x)       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00864C+((x)*0x100)))
-+#define MCF_PSC_IRMDR(x)       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008650+((x)*0x100)))
-+#define MCF_PSC_IRFDR(x)       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008654+((x)*0x100)))
-+#define MCF_PSC_RFCNT(x)       (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008658+((x)*0x100)))
-+#define MCF_PSC_TFCNT(x)       (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00865C+((x)*0x100)))
-+#define MCF_PSC_RFSR(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008664+((x)*0x100)))
-+#define MCF_PSC_TFSR(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008684+((x)*0x100)))
-+#define MCF_PSC_RFCR(x)        (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008668+((x)*0x100)))
-+#define MCF_PSC_TFCR(x)        (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008688+((x)*0x100)))
-+#define MCF_PSC_RFAR(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + (0x00866E)+((x)*0x100)))
-+#define MCF_PSC_TFAR(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + (0x00868E)+((x)*0x100)))
-+#define MCF_PSC_RFRP(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008672+((x)*0x100)))
-+#define MCF_PSC_TFRP(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008692+((x)*0x100)))
-+#define MCF_PSC_RFWP(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008676+((x)*0x100)))
-+#define MCF_PSC_TFWP(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008696+((x)*0x100)))
-+#define MCF_PSC_RLRFP(x)       (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867A+((x)*0x100)))
-+#define MCF_PSC_TLRFP(x)       (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869A+((x)*0x100)))
-+#define MCF_PSC_RLWFP(x)       (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867E+((x)*0x100)))
-+#define MCF_PSC_TLWFP(x)       (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869E+((x)*0x100)))
-+
-+/* Bit definitions and macros for MCF_PSC_MR */
-+#define MCF_PSC_MR_BC(x)              (((x)&0x03)<<0)
-+#define MCF_PSC_MR_PT                 (0x04)
-+#define MCF_PSC_MR_PM(x)              (((x)&0x03)<<3)
-+#define MCF_PSC_MR_ERR                (0x20)
-+#define MCF_PSC_MR_RXIRQ              (0x40)
-+#define MCF_PSC_MR_RXRTS              (0x80)
-+#define MCF_PSC_MR_SB(x)              (((x)&0x0F)<<0)
-+#define MCF_PSC_MR_TXCTS              (0x10)
-+#define MCF_PSC_MR_TXRTS              (0x20)
-+#define MCF_PSC_MR_CM(x)              (((x)&0x03)<<6)
-+#define MCF_PSC_MR_PM_MULTI_ADDR      (0x1C)
-+#define MCF_PSC_MR_PM_MULTI_DATA      (0x18)
-+#define MCF_PSC_MR_PM_NONE            (0x10)
-+#define MCF_PSC_MR_PM_FORCE_HI        (0x0C)
-+#define MCF_PSC_MR_PM_FORCE_LO        (0x08)
-+#define MCF_PSC_MR_PM_ODD             (0x04)
-+#define MCF_PSC_MR_PM_EVEN            (0x00)
-+#define MCF_PSC_MR_BC_5               (0x00)
-+#define MCF_PSC_MR_BC_6               (0x01)
-+#define MCF_PSC_MR_BC_7               (0x02)
-+#define MCF_PSC_MR_BC_8               (0x03)
-+#define MCF_PSC_MR_CM_NORMAL          (0x00)
-+#define MCF_PSC_MR_CM_ECHO            (0x40)
-+#define MCF_PSC_MR_CM_LOCAL_LOOP      (0x80)
-+#define MCF_PSC_MR_CM_REMOTE_LOOP     (0xC0)
-+#define MCF_PSC_MR_SB_STOP_BITS_1     (0x07)
-+#define MCF_PSC_MR_SB_STOP_BITS_15    (0x08)
-+#define MCF_PSC_MR_SB_STOP_BITS_2     (0x0F)
-+
-+/* Bit definitions and macros for MCF_PSC_SR */
-+#define MCF_PSC_SR_ERR                (0x0040)
-+#define MCF_PSC_SR_CDE_DEOF           (0x0080)
-+#define MCF_PSC_SR_RXRDY              (0x0100)
-+#define MCF_PSC_SR_FU                 (0x0200)
-+#define MCF_PSC_SR_TXRDY              (0x0400)
-+#define MCF_PSC_SR_TXEMP_URERR        (0x0800)
-+#define MCF_PSC_SR_OE                 (0x1000)
-+#define MCF_PSC_SR_PE_CRCERR          (0x2000)
-+#define MCF_PSC_SR_FE_PHYERR          (0x4000)
-+#define MCF_PSC_SR_RB_NEOF            (0x8000)
-+
-+/* Bit definitions and macros for MCF_PSC_CSR */
-+#define MCF_PSC_CSR_TCSEL(x)          (((x)&0x0F)<<0)
-+#define MCF_PSC_CSR_RCSEL(x)          (((x)&0x0F)<<4)
-+#define MCF_PSC_CSR_RCSEL_SYS_CLK     (0xD0)
-+#define MCF_PSC_CSR_RCSEL_CTM16       (0xE0)
-+#define MCF_PSC_CSR_RCSEL_CTM         (0xF0)
-+#define MCF_PSC_CSR_TCSEL_SYS_CLK     (0x0D)
-+#define MCF_PSC_CSR_TCSEL_CTM16       (0x0E)
-+#define MCF_PSC_CSR_TCSEL_CTM         (0x0F)
-+
-+/* Bit definitions and macros for MCF_PSC_CR */
-+#define MCF_PSC_CR_RXC(x)             (((x)&0x03)<<0)
-+#define MCF_PSC_CR_TXC(x)             (((x)&0x03)<<2)
-+#define MCF_PSC_CR_MISC(x)            (((x)&0x07)<<4)
-+#define MCF_PSC_CR_NONE               (0x00)
-+#define MCF_PSC_CR_STOP_BREAK         (0x70)
-+#define MCF_PSC_CR_START_BREAK        (0x60)
-+#define MCF_PSC_CR_BKCHGINT           (0x50)
-+#define MCF_PSC_CR_RESET_ERROR        (0x40)
-+#define MCF_PSC_CR_RESET_TX           (0x30)
-+#define MCF_PSC_CR_RESET_RX           (0x20)
-+#define MCF_PSC_CR_RESET_MR           (0x10)
-+#define MCF_PSC_CR_TX_DISABLED        (0x08)
-+#define MCF_PSC_CR_TX_ENABLED         (0x04)
-+#define MCF_PSC_CR_RX_DISABLED        (0x02)
-+#define MCF_PSC_CR_RX_ENABLED         (0x01)
-+
-+/* Bit definitions and macros for MCF_PSC_TB_8BIT */
-+#define MCF_PSC_TB_8BIT_TB3(x)        (((x)&0x000000FF)<<0)
-+#define MCF_PSC_TB_8BIT_TB2(x)        (((x)&0x000000FF)<<8)
-+#define MCF_PSC_TB_8BIT_TB1(x)        (((x)&0x000000FF)<<16)
-+#define MCF_PSC_TB_8BIT_TB0(x)        (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for MCF_PSC_TB_16BIT */
-+#define MCF_PSC_TB_16BIT_TB1(x)       (((x)&0x0000FFFF)<<0)
-+#define MCF_PSC_TB_16BIT_TB0(x)       (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for MCF_PSC_TB_AC97 */
-+#define MCF_PSC_TB_AC97_SOF           (0x00000800)
-+#define MCF_PSC_TB_AC97_TB(x)         (((x)&0x000FFFFF)<<12)
-+
-+/* Bit definitions and macros for MCF_PSC_IPCR */
-+#define MCF_PSC_IPCR_RESERVED         (0x0C)
-+#define MCF_PSC_IPCR_CTS              (0x0D)
-+#define MCF_PSC_IPCR_D_CTS            (0x1C)
-+#define MCF_PSC_IPCR_SYNC             (0x8C)
-+
-+/* Bit definitions and macros for MCF_PSC_ACR */
-+#define MCF_PSC_ACR_IEC0              (0x01)
-+#define MCF_PSC_ACR_CTMS(x)           (((x)&0x07)<<4)
-+#define MCF_PSC_ACR_BRG               (0x80)
-+
-+/* Bit definitions and macros for MCF_PSC_ISR */
-+#define MCF_PSC_ISR_ERR               (0x0040)
-+#define MCF_PSC_ISR_DEOF              (0x0080)
-+#define MCF_PSC_ISR_TXRDY             (0x0100)
-+#define MCF_PSC_ISR_RXRDY_FU          (0x0200)
-+#define MCF_PSC_ISR_DB                (0x0400)
-+#define MCF_PSC_ISR_IPC               (0x8000)
-+
-+/* Bit definitions and macros for MCF_PSC_IMR */
-+#define MCF_PSC_IMR_ERR               (0x0040)
-+#define MCF_PSC_IMR_DEOF              (0x0080)
-+#define MCF_PSC_IMR_TXRDY             (0x0100)
-+#define MCF_PSC_IMR_RXRDY_FU          (0x0200)
-+#define MCF_PSC_IMR_DB                (0x0400)
-+#define MCF_PSC_IMR_IPC               (0x8000)
-+
-+/* Bit definitions and macros for MCF_PSC_IP */
-+#define MCF_PSC_IP_CTS                (0x01)
-+#define MCF_PSC_IP_TGL                (0x40)
-+#define MCF_PSC_IP_LWPR_B             (0x80)
-+
-+/* Bit definitions and macros for MCF_PSC_OPSET */
-+#define MCF_PSC_OPSET_RTS             (0x01)
-+
-+/* Bit definitions and macros for MCF_PSC_OPRESET */
-+#define MCF_PSC_OPRESET_RTS           (0x01)
-+
-+/* Bit definitions and macros for MCF_PSC_SICR */
-+#define MCF_PSC_SICR_SIM(x)           (((x)&0x07)<<0)
-+#define MCF_PSC_SICR_SHDIR            (0x10)
-+#define MCF_PSC_SICR_DTS              (0x20)
-+#define MCF_PSC_SICR_AWR              (0x40)
-+#define MCF_PSC_SICR_ACRB             (0x80)
-+#define MCF_PSC_SICR_SIM_UART         (0x00)
-+#define MCF_PSC_SICR_SIM_MODEM8       (0x01)
-+#define MCF_PSC_SICR_SIM_MODEM16      (0x02)
-+#define MCF_PSC_SICR_SIM_AC97         (0x03)
-+#define MCF_PSC_SICR_SIM_SIR          (0x04)
-+#define MCF_PSC_SICR_SIM_MIR          (0x05)
-+#define MCF_PSC_SICR_SIM_FIR          (0x06)
-+
-+/* Bit definitions and macros for MCF_PSC_IRCR1 */
-+#define MCF_PSC_IRCR1_SPUL            (0x01)
-+#define MCF_PSC_IRCR1_SIPEN           (0x02)
-+#define MCF_PSC_IRCR1_FD              (0x04)
-+
-+/* Bit definitions and macros for MCF_PSC_IRCR2 */
-+#define MCF_PSC_IRCR2_NXTEOF          (0x01)
-+#define MCF_PSC_IRCR2_ABORT           (0x02)
-+#define MCF_PSC_IRCR2_SIPREQ          (0x04)
-+
-+/* Bit definitions and macros for MCF_PSC_IRMDR */
-+#define MCF_PSC_IRMDR_M_FDIV(x)       (((x)&0x7F)<<0)
-+#define MCF_PSC_IRMDR_FREQ            (0x80)
-+
-+/* Bit definitions and macros for MCF_PSC_IRFDR */
-+#define MCF_PSC_IRFDR_F_FDIV(x)       (((x)&0x0F)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_RFCNT */
-+#define MCF_PSC_RFCNT_CNT(x)          (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_TFCNT */
-+#define MCF_PSC_TFCNT_CNT(x)          (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_RFSR */
-+#define MCF_PSC_RFSR_EMT              (0x0001)
-+#define MCF_PSC_RFSR_ALARM            (0x0002)
-+#define MCF_PSC_RFSR_FU               (0x0004)
-+#define MCF_PSC_RFSR_FRMRY            (0x0008)
-+#define MCF_PSC_RFSR_OF               (0x0010)
-+#define MCF_PSC_RFSR_UF               (0x0020)
-+#define MCF_PSC_RFSR_RXW              (0x0040)
-+#define MCF_PSC_RFSR_FAE              (0x0080)
-+#define MCF_PSC_RFSR_FRM(x)           (((x)&0x000F)<<8)
-+#define MCF_PSC_RFSR_TAG              (0x1000)
-+#define MCF_PSC_RFSR_TXW              (0x4000)
-+#define MCF_PSC_RFSR_IP               (0x8000)
-+#define MCF_PSC_RFSR_FRM_BYTE0        (0x0800)
-+#define MCF_PSC_RFSR_FRM_BYTE1        (0x0400)
-+#define MCF_PSC_RFSR_FRM_BYTE2        (0x0200)
-+#define MCF_PSC_RFSR_FRM_BYTE3        (0x0100)
-+
-+/* Bit definitions and macros for MCF_PSC_TFSR */
-+#define MCF_PSC_TFSR_EMT              (0x0001)
-+#define MCF_PSC_TFSR_ALARM            (0x0002)
-+#define MCF_PSC_TFSR_FU               (0x0004)
-+#define MCF_PSC_TFSR_FRMRY            (0x0008)
-+#define MCF_PSC_TFSR_OF               (0x0010)
-+#define MCF_PSC_TFSR_UF               (0x0020)
-+#define MCF_PSC_TFSR_RXW              (0x0040)
-+#define MCF_PSC_TFSR_FAE              (0x0080)
-+#define MCF_PSC_TFSR_FRM(x)           (((x)&0x000F)<<8)
-+#define MCF_PSC_TFSR_TAG              (0x1000)
-+#define MCF_PSC_TFSR_TXW              (0x4000)
-+#define MCF_PSC_TFSR_IP               (0x8000)
-+#define MCF_PSC_TFSR_FRM_BYTE0        (0x0800)
-+#define MCF_PSC_TFSR_FRM_BYTE1        (0x0400)
-+#define MCF_PSC_TFSR_FRM_BYTE2        (0x0200)
-+#define MCF_PSC_TFSR_FRM_BYTE3        (0x0100)
-+
-+/* Bit definitions and macros for MCF_PSC_RFCR */
-+#define MCF_PSC_RFCR_CNTR(x)          (((x)&0x0000FFFF)<<0)
-+#define MCF_PSC_RFCR_TXW_MSK          (0x00040000)
-+#define MCF_PSC_RFCR_OF_MSK           (0x00080000)
-+#define MCF_PSC_RFCR_UF_MSK           (0x00100000)
-+#define MCF_PSC_RFCR_RXW_MSK          (0x00200000)
-+#define MCF_PSC_RFCR_FAE_MSK          (0x00400000)
-+#define MCF_PSC_RFCR_IP_MSK           (0x00800000)
-+#define MCF_PSC_RFCR_GR(x)            (((x)&0x00000007)<<24)
-+#define MCF_PSC_RFCR_FRMEN            (0x08000000)
-+#define MCF_PSC_RFCR_TIMER            (0x10000000)
-+#define MCF_PSC_RFCR_WRITETAG         (0x20000000)
-+#define MCF_PSC_RFCR_SHADOW           (0x80000000)
-+
-+/* Bit definitions and macros for MCF_PSC_TFCR */
-+#define MCF_PSC_TFCR_CNTR(x)          (((x)&0x0000FFFF)<<0)
-+#define MCF_PSC_TFCR_TXW_MSK          (0x00040000)
-+#define MCF_PSC_TFCR_OF_MSK           (0x00080000)
-+#define MCF_PSC_TFCR_UF_MSK           (0x00100000)
-+#define MCF_PSC_TFCR_RXW_MSK          (0x00200000)
-+#define MCF_PSC_TFCR_FAE_MSK          (0x00400000)
-+#define MCF_PSC_TFCR_IP_MSK           (0x00800000)
-+#define MCF_PSC_TFCR_GR(x)            (((x)&0x00000007)<<24)
-+#define MCF_PSC_TFCR_FRMEN            (0x08000000)
-+#define MCF_PSC_TFCR_TIMER            (0x10000000)
-+#define MCF_PSC_TFCR_WRITETAG         (0x20000000)
-+#define MCF_PSC_TFCR_SHADOW           (0x80000000)
-+
-+/* Bit definitions and macros for MCF_PSC_RFAR */
-+#define MCF_PSC_RFAR_ALARM(x)         (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_TFAR */
-+#define MCF_PSC_TFAR_ALARM(x)         (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_RFRP */
-+#define MCF_PSC_RFRP_READ(x)          (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_TFRP */
-+#define MCF_PSC_TFRP_READ(x)          (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_RFWP */
-+#define MCF_PSC_RFWP_WRITE(x)         (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_TFWP */
-+#define MCF_PSC_TFWP_WRITE(x)         (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_RLRFP */
-+#define MCF_PSC_RLRFP_LFP(x)          (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_TLRFP */
-+#define MCF_PSC_TLRFP_LFP(x)          (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_RLWFP */
-+#define MCF_PSC_RLWFP_LFP(x)          (((x)&0x01FF)<<0)
-+
-+/* Bit definitions and macros for MCF_PSC_TLWFP */
-+#define MCF_PSC_TLWFP_LFP(x)          (((x)&0x01FF)<<0)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF548X_PSC_H__ */
---- /dev/null
-+++ b/include/asm-m68k/m5485sim.h
-@@ -0,0 +1,221 @@
-+/*
-+ *	m5485sim.h -- ColdFire 547x/548x System Integration Unit support.
-+ */
-+ 
-+#ifndef	m5485sim_h
-+#define	m5485sim_h
-+
-+
-+/*
-+ *      System Integration Unit Registers
-+ */
-+#define MCF_SDRAMDS	MCF_REG32(0x000004)	/* SDRAM Drive Strength 	*/
-+#define MCF_SBCR       	MCF_REG32(0x000010)	/* System Breakpoint Control 	*/
-+#define MCF_CSnCFG(x)	MCF_REG32(0x000020+(x*4))/* SDRAM Chip Select X		*/
-+#define MCF_SECSACR     MCF_REG32(0x000038)	/* Sequential Access Control 	*/	
-+#define MCF_RSR         MCF_REG32(0x000044)	/* Reset Status 		*/
-+#define MCF_JTAGID      MCF_REG32(0x000050)	/* JTAG Device Identification 	*/
-+
-+/*
-+ *      FlexBus Chip Selects Registers
-+ */
-+#define MCF_CSARn(x)    MCF_REG32(0x000500+(x*0xC))
-+#define MCF_CSMRn(x)    MCF_REG32(0x000504+(x*0xC))
-+#define MCF_CSCRn(x)    MCF_REG32(0x000508+(x*0xC))
-+
-+/*
-+ *      Interrupt Controller Registers
-+ */
-+#define MCF_IPRH      	MCF_REG32(0x000700)
-+#define MCF_IPRL      	MCF_REG32(0x000704)
-+#define MCF_IMRH      	MCF_REG32(0x000708)
-+#define MCF_IMRL      	MCF_REG32(0x00070C)
-+#define MCF_INTFRCH   	MCF_REG32(0x000710)
-+#define MCF_INTFRCL   	MCF_REG32(0x000714)
-+#define MCF_IRLR      	MCF_REG08(0x000718)
-+#define MCF_IACKLPR   	MCF_REG08(0x000719)
-+#define MCF_SWIACK    	MCF_REG08(0x0007E0)
-+#define MCF_LnIACK(x) 	MCF_REG08(0x0007E4+((x)*0x004))
-+#define MCF_ICR(x)    	MCF_REG08(0x000740+((x)*0x001))
-+
-+/*
-+ *	Slice Timers Registers
-+ */
-+#define MCF_SLTCNT(x)   MCF_REG32(0x000900+((x)*0x010))
-+#define MCF_SCR(x)      MCF_REG32(0x000904+((x)*0x010))
-+#define MCF_SCNT(x)     MCF_REG32(0x000908+((x)*0x010))
-+#define MCF_SSR(x)      MCF_REG32(0x00090C+((x)*0x010))
-+
-+/*
-+ *	Interrupt sources
-+ */
-+#define ISC_EPORT_Fn(x)		(x) 		/* EPORT Interrupts 	*/
-+#define ISC_USB_EPn(x)		(15+(x))	/* USB Endopint 	*/
-+#define ISC_USB_ISR		(22) 		/* USB General source 	*/
-+#define ISC_USB_AISR		(22) 		/* USB core source 	*/
-+#define ISC_DSPI_OVRFW		(25)		/* DSPI overflow 	*/
-+#define ISC_DSPI_RFOF		(26)		
-+#define ISC_DSPI_RFDF		(27)		
-+#define ISC_DSPI_TFUF		(28)		
-+#define ISC_DSPI_TCF		(29)		
-+#define ISC_DSPI_TFFF		(30)		
-+#define ISC_DSPI_EOQF		(31)		
-+#define ISC_PSCn(x)		(35-(x))		
-+#define ISC_COMM_TIM		(36)		
-+#define ISC_SEC			(37)		
-+#define ISC_FEC1		(38)		
-+#define ISC_FEC0		(39)		
-+#define ISC_I2C			(40)		
-+#define ISC_PCI_ARB		(41)		
-+#define ISC_PCI_CB		(42)		
-+#define ISC_PCI_XLB		(43)		
-+#define ISC_DMA			(48)		
-+#define ISC_CANn_ERR(x)		(49+(6*(x)))		
-+#define ISC_CANn_BUSOFF(x)	(50+(6*(x)))		
-+#define ISC_CANn_MBOR(x)	(51+(6*(x)))		
-+#define ISC_CAN0_WAKEIN		(52)		
-+#define ISC_SLTn(x)		(54-(x))		
-+#define ISC_GPTn(x)		(62-(x))		
-+
-+/*
-+ *	Interrupt level and priorities
-+ */
-+#define ILP_TOP			(MCF_ICR_IL(5) | MCF_ICR_IP(3))
-+#define ILP_SLT0		(MCF_ICR_IL(5) | MCF_ICR_IP(2))
-+#define ILP_SLT1		(MCF_ICR_IL(5) | MCF_ICR_IP(1))
-+#define ILP_DMA			(MCF_ICR_IL(5) | MCF_ICR_IP(0))
-+#define ILP_SEC			(MCF_ICR_IL(4) | MCF_ICR_IP(7))
-+#define ILP_FEC0		(MCF_ICR_IL(4) | MCF_ICR_IP(6))
-+#define ILP_FEC1		(MCF_ICR_IL(4) | MCF_ICR_IP(5))
-+#define ILP_PCI_XLB		(MCF_ICR_IL(4) | MCF_ICR_IP(4))
-+#define ILP_PCI_ARB		(MCF_ICR_IL(4) | MCF_ICR_IP(3))
-+#define ILP_PCI_CB		(MCF_ICR_IL(4) | MCF_ICR_IP(2))
-+#define ILP_I2C			(MCF_ICR_IL(4) | MCF_ICR_IP(1))
-+
-+#define ILP_USB_EPn(x)		(MCF_ICR_IL(3) | MCF_ICR_IP(7-(x)))
-+#define ILP_USB_EP0		(MCF_ICR_IL(3) | MCF_ICR_IP(7))
-+#define ILP_USB_EP1		(MCF_ICR_IL(3) | MCF_ICR_IP(6))
-+#define ILP_USB_EP2		(MCF_ICR_IL(3) | MCF_ICR_IP(5))
-+#define ILP_USB_EP3		(MCF_ICR_IL(3) | MCF_ICR_IP(4))
-+#define ILP_USB_EP4		(MCF_ICR_IL(3) | MCF_ICR_IP(3))
-+#define ILP_USB_EP5		(MCF_ICR_IL(3) | MCF_ICR_IP(2))
-+#define ILP_USB_EP6		(MCF_ICR_IL(3) | MCF_ICR_IP(1))
-+#define ILP_USB_ISR		(MCF_ICR_IL(3) | MCF_ICR_IP(0))
-+
-+#define ILP_USB_AISR		(MCF_ICR_IL(2) | MCF_ICR_IP(7))
-+#define ILP_DSPI_OVRFW		(MCF_ICR_IL(2) | MCF_ICR_IP(6))
-+#define ILP_DSPI_RFOF		(MCF_ICR_IL(2) | MCF_ICR_IP(5))
-+#define ILP_DSPI_RFDF		(MCF_ICR_IL(2) | MCF_ICR_IP(4))
-+#define ILP_DSPI_TFUF		(MCF_ICR_IL(2) | MCF_ICR_IP(3))
-+#define ILP_DSPI_TCF		(MCF_ICR_IL(2) | MCF_ICR_IP(2))
-+#define ILP_DSPI_TFFF		(MCF_ICR_IL(2) | MCF_ICR_IP(1))
-+#define ILP_DSPI_EOQF		(MCF_ICR_IL(2) | MCF_ICR_IP(0))
-+
-+#define ILP_COMM_TIM		(MCF_ICR_IL(1) | MCF_ICR_IP(7))
-+#define ILP_PSCn(x)		(MCF_ICR_IL(1) | MCF_ICR_IP(3-((x)&3)))
-+#define ILP_PSC0		(MCF_ICR_IL(1) | MCF_ICR_IP(3))
-+#define ILP_PSC1		(MCF_ICR_IL(1) | MCF_ICR_IP(2))
-+#define ILP_PSC2		(MCF_ICR_IL(1) | MCF_ICR_IP(1))
-+#define ILP_PSC3		(MCF_ICR_IL(1) | MCF_ICR_IP(0))
-+
-+
-+
-+
-+
-+/********************************************************************/
-+
-+/*
-+ *      System Integration Unit Bitfields
-+ */
-+ 
-+/* SBCR */
-+#define MCF_SBCR_PIN2DSPI       (0x08000000)
-+#define MCF_SBCR_DMA2CPU        (0x10000000)
-+#define MCF_SBCR_CPU2DMA        (0x20000000)
-+#define MCF_SBCR_PIN2DMA        (0x40000000)
-+#define MCF_SBCR_PIN2CPU        (0x80000000)
-+
-+/* SECSACR */
-+#define MCF_SECSACR_SEQEN       (0x00000001)
-+
-+/* RSR */
-+#define MCF_RSR_RST             (0x00000001)
-+#define MCF_RSR_RSTWD           (0x00000002)
-+#define MCF_RSR_RSTJTG          (0x00000008)
-+
-+/* JTAGID */
-+#define MCF_JTAGID_REV          (0xF0000000)
-+#define MCF_JTAGID_PROCESSOR    (0x0FFFFFFF)
-+#define MCF_JTAGID_MCF5485      (0x0800C01D)
-+#define MCF_JTAGID_MCF5484      (0x0800D01D)
-+#define MCF_JTAGID_MCF5483      (0x0800E01D)
-+#define MCF_JTAGID_MCF5482      (0x0800F01D)
-+#define MCF_JTAGID_MCF5481      (0x0801001D)
-+#define MCF_JTAGID_MCF5480      (0x0801101D)
-+#define MCF_JTAGID_MCF5475      (0x0801201D)
-+#define MCF_JTAGID_MCF5474      (0x0801301D)
-+#define MCF_JTAGID_MCF5473      (0x0801401D)
-+#define MCF_JTAGID_MCF5472      (0x0801501D)
-+#define MCF_JTAGID_MCF5471      (0x0801601D)
-+#define MCF_JTAGID_MCF5470      (0x0801701D)
-+
-+
-+/*
-+ *      Interrupt Controller Bitfields
-+ */
-+#define MCF_IRLR_IRQ(x)         (((x)&0x7F)<<1)
-+#define MCF_IACKLPR_PRI(x)      (((x)&0x0F)<<0)
-+#define MCF_IACKLPR_LEVEL(x)    (((x)&0x07)<<4)
-+#define MCF_ICR_IP(x)           (((x)&0x07)<<0)
-+#define MCF_ICR_IL(x)           (((x)&0x07)<<3)
-+
-+/*
-+ *      Slice Timers Bitfields
-+ */
-+#define MCF_SCR_TEN    		(0x01000000)
-+#define MCF_SCR_IEN    		(0x02000000)
-+#define MCF_SCR_RUN    		(0x04000000)
-+#define MCF_SSR_ST     		(0x01000000)
-+#define MCF_SSR_BE     		(0x02000000)
-+
-+
-+/*
-+ * Some needed coldfire registers
-+ */
-+#define MCF_PAR_PCIBG 		   MCF_REG16(0x000A48)
-+#define MCF_PAR_PCIBR   	   MCF_REG16(0x000A4A)
-+#define MCF_PAR_PSCn(x)            MCF_REG08(0x000A4F-((x)&0x3))
-+#define MCF_PAR_FECI2CIRQ   	   MCF_REG16(0x000A44)
-+#define MCF_PAR_DSPI               MCF_REG16(0x000A50)
-+#define MCF_PAR_TIMER              MCF_REG08(0X000A52)
-+#define MCF_EPPAR       	   MCF_REG16(0x000F00)
-+#define MCF_EPIER       	   MCF_REG08(0x000F05)
-+#define MCF_EPFR       	   	   MCF_REG08(0x000F0C)
-+
-+/*
-+ * Some GPIO bitfields
-+ */
-+#define MCF_PAR_SDA			(0x0008)
-+#define MCF_PAR_SCL			(0x0004)
-+#define MCF_PAR_PSC_TXD             	(0x04)
-+#define MCF_PAR_PSC_RXD             	(0x08)
-+#define MCF_PAR_PSC_RTS(x)          	(((x)&0x03)<<4)
-+#define MCF_PAR_PSC_CTS(x)          	(((x)&0x03)<<6)
-+#define MCF_PAR_PSC_CTS_GPIO        	(0x00)
-+#define MCF_PAR_PSC_CTS_BCLK        	(0x80)
-+#define MCF_PAR_PSC_CTS_CTS         	(0xC0)
-+#define MCF_PAR_PSC_RTS_GPIO        	(0x00)
-+#define MCF_PAR_PSC_RTS_FSYNC       	(0x20)
-+#define MCF_PAR_PSC_RTS_RTS         	(0x30)
-+#define MCF_PAR_PSC_CANRX		(0x40)
-+
-+
-+/*
-+ * Some used coldfire values
-+ */
-+#define MCF_EPIER_EPIE(x)          (0x01 << (x))
-+#define MCF_EPPAR_EPPAx_FALLING    (2)
-+#define MCF_EPPAR_EPPA(n,x)        (((x)&0x0003) << (2*n))
-+
-+
-+#endif	/* m5485sim_h */
---- /dev/null
-+++ b/include/asm-m68k/m5485sram.h
-@@ -0,0 +1,12 @@
-+#ifndef SYS_SRAM_H
-+#define SYS_SRAM_H
-+
-+
-+#define SYS_SRAM_DMA_START        MCF_MBAR + 0x10000
-+#define SYS_SRAM_DMA_SIZE         8192
-+#define SYS_SRAM_FEC_START        SYS_SRAM_DMA_START + SYS_SRAM_DMA_SIZE
-+#define SYS_SRAM_FEC_SIZE         2048
-+#define SYS_SRAM_SEC_START        SYS_SRAM_FEC_START + SYS_SRAM_FEC_SIZE
-+#define SYS_SRAM_SEC_SIZE         1280
-+
-+#endif /* SYS_SRAM_H */
---- a/include/asm-m68k/machdep.h
-+++ b/include/asm-m68k/machdep.h
-@@ -32,4 +32,11 @@ extern void (*mach_heartbeat) (int);
- extern void (*mach_l2_flush) (int);
- extern void (*mach_beep) (unsigned int, unsigned int);
- 
-+#ifdef CONFIG_COLDFIRE
-+extern void __init config_coldfire(void);
-+extern void __init mmu_context_init(void);
-+extern irq_handler_t mach_default_handler;
-+extern void (*mach_tick)(void);
-+#endif
-+
- #endif /* _M68K_MACHDEP_H */
---- /dev/null
-+++ b/include/asm-m68k/MCD_dma.h
-@@ -0,0 +1,408 @@
-+/*********************************************************************
-+ *
-+ * Copyright (C) 2004  Motorola, Inc.
-+ *  MOTOROLA, INC. All Rights Reserved.
-+ *  You are hereby granted a copyright license to use
-+ *  the SOFTWARE so long as this entire notice is
-+ *  retained without alteration in any modified and/or redistributed
-+ *  versions, and that such modified versions are clearly identified
-+ *  as such. No licenses are granted by implication, estoppel or
-+ *  otherwise under any patents or trademarks of Motorola, Inc. This
-+ *  software is provided on an "AS IS" basis and without warranty.
-+ *
-+ *  To the maximum extent permitted by applicable law, MOTOROLA
-+ *  DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING
-+ *  IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
-+ *  PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE
-+ *  SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY
-+ *  ACCOMPANYING WRITTEN MATERIALS.
-+ *
-+ *  To the maximum extent permitted by applicable law, IN NO EVENT
-+ *  SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING
-+ *  WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
-+ *  INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY
-+ *  LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-+ *
-+ *  Motorola assumes no responsibility for the maintenance and support
-+ *  of this software
-+ ********************************************************************/
-+
-+/*
-+ * File:        MCD_dma.h
-+ * Purpose:     Main header file for multi-channel DMA API.
-+ *
-+ * Notes:
-+ *
-+ * Modifications:
-+ */
-+#ifndef _MCD_API_H
-+#define _MCD_API_H
-+
-+#include <asm/types.h>
-+
-+/*
-+ * Turn Execution Unit tasks ON (#define) or OFF (#undef)
-+ */
-+#undef MCD_INCLUDE_EU
-+
-+/*
-+ * Number of DMA channels
-+ */
-+#define NCHANNELS 16
-+
-+/*
-+ * Total number of variants
-+ */
-+#ifdef MCD_INCLUDE_EU
-+#define NUMOFVARIANTS   6
-+#else
-+#define NUMOFVARIANTS   4
-+#endif
-+
-+/*
-+ * Define sizes of the various tables
-+ */
-+#define TASK_TABLE_SIZE     (NCHANNELS*32)
-+#define VAR_TAB_SIZE        (128)
-+#define CONTEXT_SAVE_SIZE   (128)
-+#define FUNCDESC_TAB_SIZE   (256)
-+
-+#ifdef MCD_INCLUDE_EU
-+#define FUNCDESC_TAB_NUM    16
-+#else
-+#define FUNCDESC_TAB_NUM    1
-+#endif
-+
-+
-+#ifndef DEFINESONLY
-+
-+/*
-+ * Portability typedefs
-+ */
-+ /*
-+#ifndef s32
-+typedef int s32;
-+#endif
-+#ifndef u32
-+typedef unsigned int u32;
-+#endif
-+#ifndef s16
-+typedef short s16;
-+#endif
-+#ifndef u16
-+typedef unsigned short u16;
-+#endif
-+#ifndef s8
-+typedef char s8;
-+#endif
-+#ifndef u8
-+typedef unsigned char u8;
-+#endif
-+*/
-+/*
-+ * These structures represent the internal registers of the
-+ * multi-channel DMA
-+ */
-+struct dmaRegs_s {
-+   u32 taskbar;         /* task table base address register */
-+   u32 currPtr;
-+   u32 endPtr;
-+   u32 varTablePtr;
-+   u16 dma_rsvd0;
-+   u16 ptdControl;      /* ptd control */
-+   u32 intPending;      /* interrupt pending register */
-+   u32 intMask;         /* interrupt mask register */
-+   u16 taskControl[16]; /* task control registers */
-+   u8  priority[32];    /* priority registers */
-+   u32 initiatorMux;    /* initiator mux control */
-+   u32 taskSize0;       /* task size control register 0. */
-+   u32 taskSize1;       /* task size control register 1. */
-+   u32 dma_rsvd1;       /* reserved */
-+   u32 dma_rsvd2;       /* reserved */
-+   u32 debugComp1;      /* debug comparator 1 */
-+   u32 debugComp2;      /* debug comparator 2 */
-+   u32 debugControl;    /* debug control */
-+   u32 debugStatus;     /* debug status */
-+   u32 ptdDebug;        /* priority task decode debug */
-+   u32 dma_rsvd3[31];   /* reserved */
-+};
-+typedef volatile struct dmaRegs_s dmaRegs;
-+
-+#endif
-+
-+/*
-+ * PTD contrl reg bits
-+ */
-+#define PTD_CTL_TSK_PRI         0x8000
-+#define PTD_CTL_COMM_PREFETCH   0x0001
-+
-+/*
-+ * Task Control reg bits and field masks
-+ */
-+#define TASK_CTL_EN             0x8000
-+#define TASK_CTL_VALID          0x4000
-+#define TASK_CTL_ALWAYS         0x2000
-+#define TASK_CTL_INIT_MASK      0x1f00
-+#define TASK_CTL_ASTRT          0x0080
-+#define TASK_CTL_HIPRITSKEN     0x0040
-+#define TASK_CTL_HLDINITNUM     0x0020
-+#define TASK_CTL_ASTSKNUM_MASK  0x000f
-+
-+/*
-+ * Priority reg bits and field masks
-+ */
-+#define PRIORITY_HLD            0x80
-+#define PRIORITY_PRI_MASK       0x07
-+
-+/*
-+ * Debug Control reg bits and field masks
-+ */
-+#define DBG_CTL_BLOCK_TASKS_MASK    0xffff0000
-+#define DBG_CTL_AUTO_ARM            0x00008000
-+#define DBG_CTL_BREAK               0x00004000
-+#define DBG_CTL_COMP1_TYP_MASK      0x00003800
-+#define DBG_CTL_COMP2_TYP_MASK      0x00000070
-+#define DBG_CTL_EXT_BREAK           0x00000004
-+#define DBG_CTL_INT_BREAK           0x00000002
-+
-+/*
-+ * PTD Debug reg selector addresses
-+ * This reg must be written with a value to show the contents of
-+ * one of the desired internal register.
-+ */
-+#define PTD_DBG_REQ             0x00 /* shows the state of 31 initiators */
-+#define PTD_DBG_TSK_VLD_INIT    0x01 /* shows which 16 tasks are valid and
-+                                        have initiators asserted */
-+
-+
-+/*
-+ * General return values
-+ */
-+#define MCD_OK                   0
-+#define MCD_ERROR               -1
-+#define MCD_TABLE_UNALIGNED     -2
-+#define MCD_CHANNEL_INVALID     -3
-+
-+/*
-+ * MCD_initDma input flags
-+ */
-+#define MCD_RELOC_TASKS         0x00000001
-+#define MCD_NO_RELOC_TASKS      0x00000000
-+#define MCD_COMM_PREFETCH_EN    0x00000002  /* Commbus Prefetching - MCF547x/548x ONLY */
-+
-+/*
-+ * MCD_dmaStatus Status Values for each channel
-+ */
-+#define MCD_NO_DMA  1 /* No DMA has been requested since reset */
-+#define MCD_IDLE    2 /* DMA active, but the initiator is currently inactive */
-+#define MCD_RUNNING 3 /* DMA active, and the initiator is currently active */
-+#define MCD_PAUSED  4 /* DMA active but it is currently paused */
-+#define MCD_HALTED  5 /* the most recent DMA has been killed with MCD_killTask() */
-+#define MCD_DONE    6 /* the most recent DMA has completed. */
-+
-+
-+/*
-+ * MCD_startDma parameter defines
-+ */
-+
-+/*
-+ * Constants for the funcDesc parameter
-+ */
-+/* Byte swapping: */
-+#define MCD_NO_BYTE_SWAP    0x00045670  /* to disable byte swapping. */
-+#define MCD_BYTE_REVERSE    0x00076540  /* to reverse the bytes of each u32 of the DMAed data. */
-+#define MCD_U16_REVERSE     0x00067450  /* to reverse the 16-bit halves of
-+                                           each 32-bit data value being DMAed.*/
-+#define MCD_U16_BYTE_REVERSE    0x00054760 /* to reverse the byte halves of each
-+                                            16-bit half of each 32-bit data value DMAed */
-+#define MCD_NO_BIT_REV  0x00000000  /* do not reverse the bits of each byte DMAed. */
-+#define MCD_BIT_REV     0x00088880  /* reverse the bits of each byte DMAed */
-+/* CRCing: */
-+#define MCD_CRC16       0xc0100000  /* to perform CRC-16 on DMAed data. */
-+#define MCD_CRCCCITT    0xc0200000  /* to perform CRC-CCITT on DMAed data. */
-+#define MCD_CRC32       0xc0300000  /* to perform CRC-32 on DMAed data. */
-+#define MCD_CSUMINET    0xc0400000  /* to perform internet checksums on DMAed data.*/
-+#define MCD_NO_CSUM     0xa0000000  /* to perform no checksumming. */
-+
-+#define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | MCD_NO_CSUM)
-+#define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM)
-+
-+/*
-+ * Constants for the flags parameter
-+ */
-+#define MCD_TT_FLAGS_RL   0x00000001 /* Read line */
-+#define MCD_TT_FLAGS_CW   0x00000002 /* Combine Writes */
-+#define MCD_TT_FLAGS_SP   0x00000004 /* Speculative prefetch(XLB) MCF547x/548x ONLY  */
-+#define MCD_TT_FLAGS_MASK 0x000000ff
-+#define MCD_TT_FLAGS_DEF  (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW)
-+
-+#define MCD_SINGLE_DMA  0x00000100 /* Unchained DMA */
-+#define MCD_CHAIN_DMA              /* TBD */
-+#define MCD_EU_DMA                 /* TBD */
-+#define MCD_FECTX_DMA   0x00001000 /* FEC TX ring DMA */
-+#define MCD_FECRX_DMA   0x00002000 /* FEC RX ring DMA */
-+
-+
-+/* these flags are valid for MCD_startDma and the chained buffer descriptors */
-+#define MCD_BUF_READY   0x80000000 /* indicates that this buffer is now under the DMA's control */
-+#define MCD_WRAP        0x20000000 /* to tell the FEC Dmas to wrap to the first BD */
-+#define MCD_INTERRUPT   0x10000000 /* to generate an interrupt after completion of the DMA. */
-+#define MCD_END_FRAME   0x08000000 /* tell the DMA to end the frame when transferring
-+                                      last byte of data in buffer */
-+#define MCD_CRC_RESTART 0x40000000 /* to empty out the accumulated checksum
-+                                      prior to performing the DMA. */
-+
-+/* Defines for the FEC buffer descriptor control/status word*/
-+#define MCD_FEC_BUF_READY   0x8000
-+#define MCD_FEC_WRAP        0x2000
-+#define MCD_FEC_INTERRUPT   0x1000
-+#define MCD_FEC_END_FRAME   0x0800
-+
-+
-+/*
-+ * Defines for general intuitiveness
-+ */
-+
-+#define MCD_TRUE  1
-+#define MCD_FALSE 0
-+
-+/*
-+ * Three different cases for destination and source.
-+ */
-+#define MINUS1          -1
-+#define ZERO            0
-+#define PLUS1           1
-+
-+#ifndef DEFINESONLY
-+
-+/* Task Table Entry struct*/
-+typedef struct {
-+    u32 TDTstart;   /* task descriptor table start */
-+    u32 TDTend;     /* task descriptor table end */
-+    u32 varTab;     /* variable table start */
-+    u32 FDTandFlags;    /* function descriptor table start and flags */
-+    volatile u32 descAddrAndStatus;
-+    volatile u32 modifiedVarTab;
-+    u32 contextSaveSpace;   /* context save space start */
-+    u32 literalBases;
-+} TaskTableEntry;
-+
-+
-+/* Chained buffer descriptor */
-+typedef volatile struct MCD_bufDesc_struct MCD_bufDesc;
-+struct MCD_bufDesc_struct {
-+   u32 flags;         /* flags describing the DMA */
-+   u32 csumResult;    /* checksum from checksumming performed since last checksum reset */
-+   s8  *srcAddr;      /* the address to move data from */
-+   s8  *destAddr;     /* the address to move data to */
-+   s8  *lastDestAddr; /* the last address written to */
-+   u32 dmaSize;       /* the number of bytes to transfer independent of the transfer size */
-+   MCD_bufDesc *next; /* next buffer descriptor in chain */
-+   u32 info;          /* private information about this descriptor;  DMA does not affect it */
-+};
-+
-+/* Progress Query struct */
-+typedef volatile struct MCD_XferProg_struct {
-+   s8 *lastSrcAddr;         /* the most-recent or last, post-increment source address */
-+   s8 *lastDestAddr;        /* the most-recent or last, post-increment destination address */
-+   u32  dmaSize;            /* the amount of data transferred for the current buffer */
-+   MCD_bufDesc *currBufDesc;/* pointer to the current buffer descriptor being DMAed */
-+} MCD_XferProg;
-+
-+
-+/* FEC buffer descriptor */
-+typedef volatile struct MCD_bufDescFec_struct {
-+    u16 statCtrl;
-+    u16 length;
-+    u32 dataPointer;
-+} MCD_bufDescFec;
-+
-+
-+/*************************************************************************/
-+/*
-+ * API function Prototypes  - see MCD_dmaApi.c for further notes
-+ */
-+
-+/*
-+ * MCD_startDma starts a particular kind of DMA .
-+ */
-+int MCD_startDma (
-+   int channel,   /* the channel on which to run the DMA */
-+   s8  *srcAddr,  /* the address to move data from, or buffer-descriptor address */
-+   s16 srcIncr,   /* the amount to increment the source address per transfer */
-+   s8  *destAddr, /* the address to move data to */
-+   s16 destIncr,  /* the amount to increment the destination address per transfer */
-+   u32 dmaSize,   /* the number of bytes to transfer independent of the transfer size */
-+   u32 xferSize,  /* the number bytes in of each data movement (1, 2, or 4) */
-+   u32 initiator, /* what device initiates the DMA */
-+   int priority,  /* priority of the DMA */
-+   u32 flags,     /* flags describing the DMA */
-+   u32 funcDesc   /* a description of byte swapping, bit swapping, and CRC actions */
-+);
-+
-+/* 
-+ * MCD_initDma() initializes the DMA API by setting up a pointer to the DMA 
-+ * registers, relocating and creating the appropriate task structures, and 
-+ * setting up some global settings
-+ */
-+int MCD_initDma (dmaRegs *sDmaBarAddr, void *taskTableDest, u32 flags);
-+
-+/* 
-+ * MCD_dmaStatus() returns the status of the DMA on the requested channel.
-+ */
-+int MCD_dmaStatus (int channel);
-+
-+/* 
-+ * MCD_XferProgrQuery() returns progress of DMA on requested channel
-+ */
-+int MCD_XferProgrQuery (int channel, MCD_XferProg *progRep);
-+
-+/* 
-+ * MCD_killDma() halts the DMA on the requested channel, without any
-+ * intention of resuming the DMA.
-+ */
-+int MCD_killDma (int channel);
-+
-+/* 
-+ * MCD_continDma() continues a DMA which as stopped due to encountering an
-+ * unready buffer descriptor.
-+ */
-+int MCD_continDma (int channel);
-+
-+/* 
-+ * MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is
-+ * running on that channel). 
-+ */
-+int MCD_pauseDma (int channel);
-+
-+/* 
-+ * MCD_resumeDma() resumes the DMA on a given channel (if any DMA is
-+ * running on that channel).
-+ */
-+int MCD_resumeDma (int channel);
-+
-+/* 
-+ * MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA
-+ */
-+int MCD_csumQuery (int channel, u32 *csum);
-+
-+/* 
-+ * MCD_getCodeSize provides the packed size required by the microcoded task
-+ * and structures.
-+ */
-+int MCD_getCodeSize(void);
-+
-+/*
-+ * MCD_getVersion provides a pointer to a version string and returns a
-+ * version number.
-+ */
-+int MCD_getVersion(char **longVersion);
-+
-+/* macro for setting a location in the variable table */
-+#define MCD_SET_VAR(taskTab,idx,value) ((u32 *)(taskTab)->varTab)[idx] = value
-+   /* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function,
-+      so I'm avoiding surrounding it with "do {} while(0)" */
-+
-+#endif  /* DEFINESONLY */
-+
-+#endif /* _MCD_API_H */
---- /dev/null
-+++ b/include/asm-m68k/mcf5445x_ccm.h
-@@ -0,0 +1,163 @@
-+/*
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_CCM_H__
-+#define __MCF5445X_CCM_H__
-+
-+/*********************************************************************
-+*
-+* Chip Configuration Module (CCM)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_CCM_CCR	MCF_REG16(0xFC0A0004)	/* Chip Configuration Register (Read-only) (256 or 360 TEPBGA) */
-+#define MCF_CCM_RCON	MCF_REG16(0xFC0A0008)	/* Reset Configuration (Read-only) (256 or 360 TEPBGA) */
-+#define MCF_CCM_CIR	MCF_REG16(0xFC0A000A)	/* Chip Identification Register (Read-only) */
-+#define MCF_CCM_MISCCR	MCF_REG16(0xFC0A0010)	/* Miscellaneous Control Register */
-+#define MCF_CCM_CDR	MCF_REG16(0xFC0A0012)	/* Clock Divider Register */
-+#define MCF_CCM_UOCSR	MCF_REG16(0xFC0A0014)	/* USB On-the-Go Controller Status Register */
-+#define MCF_CCM_SBFSR	MCF_REG16(0xFC0A0018)	/* Serial Boot Facility Status Register (Read Only) */
-+#define MCF_CCM_SBFCR	MCF_REG16(0xFC0A0020)	/* Serial Boot Facility Control Register */
-+
-+/* Bit definitions and macros for CCR_360 */
-+#define MCF_CCM_CCR_360_PLLMULT2(x)         (((x) & 0x0003))	/* 2-Bit PLL clock mode */
-+#define MCF_CCM_CCR_360_PCISLEW             (0x0004)		/* PCI pad slew rate mode */
-+#define MCF_CCM_CCR_360_PCIMODE             (0x0008)		/* PCI host/agent mode */
-+#define MCF_CCM_CCR_360_PLLMODE             (0x0010)		/* PLL Mode */
-+#define MCF_CCM_CCR_360_FBCONFIG(x)         (((x) & 0x0007) << 5)  /* Flexbus/PCI port size configuration */
-+#define MCF_CCM_CCR_360_PLLMULT3(x)         (((x) & 0x0007))	/* 3-Bit PLL Clock Mode */
-+#define MCF_CCM_CCR_360_OSCMODE             (0x0008)		/* Oscillator Clock Mode */
-+#define MCF_CCM_CCR_360_FBCONFIG_MASK       (0x00E0)
-+#define MCF_CCM_CCR_360_PLLMULT2_MASK       (0x0003)
-+#define MCF_CCM_CCR_360_PLLMULT3_MASK       (0x0007)
-+#define MCF_CCM_CCR_360_FBCONFIG_NM_NP_32   (0x0000)
-+#define MCF_CCM_CCR_360_FBCONFIG_NM_NP_8    (0x0020)
-+#define MCF_CCM_CCR_360_FBCONFIG_NM_NP_16   (0x0040)
-+#define MCF_CCM_CCR_360_FBCONFIG_M_P_16     (0x0060)
-+#define MCF_CCM_CCR_360_FBCONFIG_M_NP_32    (0x0080)
-+#define MCF_CCM_CCR_360_FBCONFIG_M_NP_8     (0x00A0)
-+#define MCF_CCM_CCR_360_FBCONFIG_M_NP_16    (0x00C0)
-+#define MCF_CCM_CCR_360_FBCONFIG_M_P_8      (0x00E0)
-+#define MCF_CCM_CCR_360_PLLMULT2_12X        (0x0000)
-+#define MCF_CCM_CCR_360_PLLMULT2_6X         (0x0001)
-+#define MCF_CCM_CCR_360_PLLMULT2_16X        (0x0002)
-+#define MCF_CCM_CCR_360_PLLMULT2_8X         (0x0003)
-+#define MCF_CCM_CCR_360_PLLMULT3_20X        (0x0000)
-+#define MCF_CCM_CCR_360_PLLMULT3_10X        (0x0001)
-+#define MCF_CCM_CCR_360_PLLMULT3_24X        (0x0002)
-+#define MCF_CCM_CCR_360_PLLMULT3_18X        (0x0003)
-+#define MCF_CCM_CCR_360_PLLMULT3_12X        (0x0004)
-+#define MCF_CCM_CCR_360_PLLMULT3_6X         (0x0005)
-+#define MCF_CCM_CCR_360_PLLMULT3_16X        (0x0006)
-+#define MCF_CCM_CCR_360_PLLMULT3_8X         (0x0007)
-+
-+/* Bit definitions and macros for CCR_256 */
-+#define MCF_CCM_CCR_256_PLLMULT3(x)         (((x) & 0x0007))  /* 3-Bit PLL clock mode */
-+#define MCF_CCM_CCR_256_OSCMODE             (0x0008)	      /* Oscillator clock mode */
-+#define MCF_CCM_CCR_256_PLLMODE             (0x0010)	      /* PLL Mode */
-+#define MCF_CCM_CCR_256_FBCONFIG(x)         (((x) & 0x0007) << 5)  /* Flexbus/PCI port size configuration */
-+#define MCF_CCM_CCR_256_FBCONFIG_MASK       (0x00E0)
-+#define MCF_CCM_CCR_256_FBCONFIG_NM_32      (0x0000)
-+#define MCF_CCM_CCR_256_FBCONFIG_NM_8       (0x0020)
-+#define MCF_CCM_CCR_256_FBCONFIG_NM_16      (0x0040)
-+#define MCF_CCM_CCR_256_FBCONFIG_M_32       (0x0080)
-+#define MCF_CCM_CCR_256_FBCONFIG_M_8        (0x00A0)
-+#define MCF_CCM_CCR_256_FBCONFIG_M_16       (0x00C0)
-+#define MCF_CCM_CCR_256_PLLMULT3_MASK       (0x0007)
-+#define MCF_CCM_CCR_256_PLLMULT3_20X        (0x0000)
-+#define MCF_CCM_CCR_256_PLLMULT3_10X        (0x0001)
-+#define MCF_CCM_CCR_256_PLLMULT3_24X        (0x0002)
-+#define MCF_CCM_CCR_256_PLLMULT3_18X        (0x0003)
-+#define MCF_CCM_CCR_256_PLLMULT3_12X        (0x0004)
-+#define MCF_CCM_CCR_256_PLLMULT3_6X         (0x0005)
-+#define MCF_CCM_CCR_256_PLLMULT3_16X        (0x0006)
-+#define MCF_CCM_CCR_256_PLLMULT3_8X         (0x0007)
-+
-+/* Bit definitions and macros for RCON_360 */
-+#define MCF_CCM_RCON_360_PLLMULT(x)     (((x)&0x0003))	/* PLL clock mode */
-+#define MCF_CCM_RCON_360_PCISLEW        (0x0004)	/* PCI pad slew rate mode */
-+#define MCF_CCM_RCON_360_PCIMODE        (0x0008)	/* PCI host/agent mode */
-+#define MCF_CCM_RCON_360_PLLMODE        (0x0010)	/* PLL Mode */
-+#define MCF_CCM_RCON_360_FBCONFIG(x)    (((x) & 0x0007) << 5)	/* Flexbus/PCI port size configuration */
-+
-+/* Bit definitions and macros for RCON_256 */
-+#define MCF_CCM_RCON_256_PLLMULT(x)     (((x) & 0x0007)) /* PLL clock mode */
-+#define MCF_CCM_RCON_256_OSCMODE        (0x0008)	/* Oscillator clock mode */
-+#define MCF_CCM_RCON_256_PLLMODE        (0x0010)	/* PLL Mode */
-+#define MCF_CCM_RCON_256_FBCONFIG(x)    (((x) & 0x0007) << 5)	/* Flexbus/PCI port size configuration */
-+
-+/* Bit definitions and macros for CIR */
-+#define MCF_CCM_CIR_PRN(x)          (((x) & 0x003F))	/* Part revision number */
-+#define MCF_CCM_CIR_PIN(x)          (((x) & 0x03FF) << 6)	/* Part identification number */
-+#define MCF_CCM_CIR_PIN_MASK        (0xFFC0)
-+#define MCF_CCM_CIR_PRN_MASK        (0x003F)
-+#define MCF_CCM_CIR_PIN_MCF54450    (0x4F << 6)
-+#define MCF_CCM_CIR_PIN_MCF54451    (0x4D << 6)
-+#define MCF_CCM_CIR_PIN_MCF54452    (0x4B << 6)
-+#define MCF_CCM_CIR_PIN_MCF54453    (0x49 << 6)
-+#define MCF_CCM_CIR_PIN_MCF54454    (0x4A << 6)
-+#define MCF_CCM_CIR_PIN_MCF54455    (0x48 << 6)
-+
-+/* Bit definitions and macros for MISCCR */
-+#define MCF_CCM_MISCCR_USBSRC           (0x0001)	/* USB clock source */
-+#define MCF_CCM_MISCCR_USBOC            (0x0002)	/* USB VBUS over-current sense polarity */
-+#define MCF_CCM_MISCCR_USBPUE           (0x0004)	/* USB transceiver pull-up enable */
-+#define MCF_CCM_MISCCR_SSISRC           (0x0010)	/* SSI clock source */
-+#define MCF_CCM_MISCCR_TIMDMA           (0x0020)	/* Timer DMA mux selection */
-+#define MCF_CCM_MISCCR_SSIPUS           (0x0040)	/* SSI RXD/TXD pull select */
-+#define MCF_CCM_MISCCR_SSIPUE           (0x0080)	/* SSI RXD/TXD pull enable */
-+#define MCF_CCM_MISCCR_BMT(x)           (((x) & 0x0007) << 8)	/* Bus monitor timing field */
-+#define MCF_CCM_MISCCR_BME              (0x0800)	/* Bus monitor external enable bit */
-+#define MCF_CCM_MISCCR_LIMP             (0x1000)	/* Limp mode enable */
-+#define MCF_CCM_MISCCR_BMT_65536        (0 << 8)
-+#define MCF_CCM_MISCCR_BMT_32768        (1 << 8)
-+#define MCF_CCM_MISCCR_BMT_16384        (2 << 8)
-+#define MCF_CCM_MISCCR_BMT_8192         (3 << 8)
-+#define MCF_CCM_MISCCR_BMT_4096         (4 << 8)
-+#define MCF_CCM_MISCCR_BMT_2048         (5 << 8)
-+#define MCF_CCM_MISCCR_BMT_1024         (6 << 8)
-+#define MCF_CCM_MISCCR_BMT_512          (7 << 8)
-+#define MCF_CCM_MISCCR_SSIPUE_UP        (1 << 7)
-+#define MCF_CCM_MISCCR_SSIPUE_DOWN      (0 << 7)
-+#define MCF_CCM_MISCCR_SSIPUS_UP        (1 << 6)
-+#define MCF_CCM_MISCCR_SSIPUS_DOWN      (0 << 6)
-+#define MCF_CCM_MISCCR_TIMDMA_TIM       (1 << 5)
-+#define MCF_CCM_MISCCR_TIMDMA_SSI       (0 << 5)
-+#define MCF_CCM_MISCCR_SSISRC_CLKIN     (0 << 4)
-+#define MCF_CCM_MISCCR_SSISRC_PLL       (1 << 4)
-+#define MCF_CCM_MISCCR_USBOC_ACTHI      (0 << 1)
-+#define MCF_CCM_MISCCR_USBOC_ACTLO      (1 << 1)
-+#define MCF_CCM_MISCCR_USBSRC_CLKIN     (0)
-+#define MCF_CCM_MISCCR_USBSRC_PLL       (1)
-+
-+/* Bit definitions and macros for CDR */
-+#define MCF_CCM_CDR_SSIDIV(x)   (((x) & 0x00FF))	/* SSI oversampling clock divider */
-+#define MCF_CCM_CDR_LPDIV(x)    (((x) & 0x000F) << 8)	/* Low power clock divider */
-+
-+/* Bit definitions and macros for UOCSR */
-+#define MCF_CCM_UOCSR_XPDE          (0x0001)	/* On-chip transceiver pull-down enable */
-+#define MCF_CCM_UOCSR_UOMIE         (0x0002)	/* USB OTG misc interrupt enable */
-+#define MCF_CCM_UOCSR_WKUP          (0x0004)	/* USB OTG controller wake-up event */
-+#define MCF_CCM_UOCSR_PWRFLT        (0x0008)	/* VBUS power fault */
-+#define MCF_CCM_UOCSR_SEND          (0x0010)	/* Session end */
-+#define MCF_CCM_UOCSR_VVLD          (0x0020)	/* VBUS valid indicator */
-+#define MCF_CCM_UOCSR_BVLD          (0x0040)	/* B-peripheral valid indicator */
-+#define MCF_CCM_UOCSR_AVLD          (0x0080)	/* A-peripheral valid indicator */
-+#define MCF_CCM_UOCSR_DPPU          (0x0100)	/* D+ pull-up for FS enabled (read-only) */
-+#define MCF_CCM_UOCSR_DCR_VBUS      (0x0200)	/* VBUS discharge resistor enabled (read-only) */
-+#define MCF_CCM_UOCSR_CRG_VBUS      (0x0400)	/* VBUS charge resistor enabled (read-only) */
-+#define MCF_CCM_UOCSR_DMPD          (0x1000)	/* D- 15Kohm pull-down (read-only) */
-+#define MCF_CCM_UOCSR_DPPD          (0x2000)	/* D+ 15Kohm pull-down (read-only) */
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_CCM_H__ */
---- /dev/null
-+++ b/include/asm-m68k/mcf5445x_dspi.h
-@@ -0,0 +1,402 @@
-+/*
-+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_DSPI_H__
-+#define __MCF5445X_DSPI_H__
-+
-+/*********************************************************************
-+*
-+* DMA Serial Peripheral Interface (DSPI)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_DSPI_DMCR           MCF_REG32(0xFC05C000)   /* DSPI Module Configuration Register */
-+#define MCF_DSPI_DTCR           MCF_REG32(0xFC05C008)   /* DSPI Transfer Count Register */
-+#define MCF_DSPI_DCTAR0         MCF_REG32(0xFC05C00C)   /* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR1         MCF_REG32(0xFC05C010)   /* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR2         MCF_REG32(0xFC05C014)   /* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR3         MCF_REG32(0xFC05C018)   /* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR4         MCF_REG32(0xFC05C01C)   /* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR5         MCF_REG32(0xFC05C020)   /* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR6         MCF_REG32(0xFC05C024)   /* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DCTAR7         MCF_REG32(0xFC05C028)   /* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DSR            MCF_REG32(0xFC05C02C)   /* DSPI Status Register */
-+#define MCF_DSPI_DRSER          MCF_REG32(0xFC05C030)   /* DSPI DMA/Interrupt Request Select and Enable Register */
-+#define MCF_DSPI_DTFR           MCF_REG32(0xFC05C034)   /* DSPI Transmit FIFO Register */
-+#define MCF_DSPI_DRFR           MCF_REG32(0xFC05C038)   /* DSPI Receive FIFO Register */
-+#define MCF_DSPI_DTFDR0         MCF_REG32(0xFC05C03C)   /* DSPI Transmit FIFO Debugging Registers */
-+#define MCF_DSPI_DTFDR1         MCF_REG32(0xFC05C040)   /* DSPI Transmit FIFO Debugging Registers */
-+#define MCF_DSPI_DTFDR2         MCF_REG32(0xFC05C044)   /* DSPI Transmit FIFO Debugging Registers */
-+#define MCF_DSPI_DTFDR3         MCF_REG32(0xFC05C048)   /* DSPI Transmit FIFO Debugging Registers */
-+#define MCF_DSPI_DRFDR0         MCF_REG32(0xFC05C07C)   /* DSPI Receive FIFO Debugging Registers */
-+#define MCF_DSPI_DRFDR1         MCF_REG32(0xFC05C080)   /* DSPI Receive FIFO Debugging Registers */
-+#define MCF_DSPI_DRFDR2         MCF_REG32(0xFC05C084)   /* DSPI Receive FIFO Debugging Registers */
-+#define MCF_DSPI_DRFDR3         MCF_REG32(0xFC05C088)   /* DSPI Receive FIFO Debugging Registers */
-+
-+/* Parameterized register read/write macros for multiple registers */
-+#define MCF_DSPI_DCTAR(x)       MCF_REG32(0xFC05C00C+((x)*0x004))	/* DSPI Clock and Transfer Attributes Register */
-+#define MCF_DSPI_DTFDR(x)       MCF_REG32(0xFC05C03C+((x)*0x004))	/* DSPI Transmit FIFO Debugging Registers */
-+#define MCF_DSPI_DRFDR(x)       MCF_REG32(0xFC05C07C+((x)*0x004))	/* DSPI Receive FIFO Debugging Registers */
-+
-+/* Bit definitions and macros for DMCR */
-+#define MCF_DSPI_DMCR_HALT          (0x00000001)            /* Halt -- stops and starts DSPI transfers */
-+#define MCF_DSPI_DMCR_SMPLPT(x)     (((x)&0x00000003)<<8)   /* Sample point selection */
-+#define MCF_DSPI_DMCR_CLRRXF        (0x00000400)            /* Clear receive FIFO */
-+#define MCF_DSPI_DMCR_CLRTXF        (0x00000800)            /* Clear transmit FIFO */
-+#define MCF_DSPI_DMCR_DISRXF        (0x00001000)            /* Disable receive FIFO */
-+#define MCF_DSPI_DMCR_DISTXF        (0x00002000)            /* Disable transmit FIFO */
-+#define MCF_DSPI_DMCR_MDIS          (0x00004000)            /* Module Disable */
-+#define MCF_DSPI_DMCR_PCSIS0        (0x00010000)            /* Peripheral chip-select 0 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS1        (0x00020000)            /* Peripheral chip-select 1 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS2        (0x00040000)            /* Peripheral chip-select 2 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS3        (0x00080000)            /* Peripheral chip-select 3 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS4        (0x00100000)            /* Peripheral chip-select 4 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS5        (0x00200000)            /* Peripheral chip-select 5 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS6        (0x00400000)            /* Peripheral chip-select 6 inactive state */
-+#define MCF_DSPI_DMCR_PCSIS7        (0x00800000)            /* Peripheral chip-select 7 inactive state */
-+#define MCF_DSPI_DMCR_ROOE          (0x01000000)            /* Receive FIFO overflow overwrite enable */
-+#define MCF_DSPI_DMCR_PCSSE         (0x02000000)            /* Peripheral chip select strobe enable */
-+#define MCF_DSPI_DMCR_MTFE          (0x04000000)            /* Modified timing format enable */
-+#define MCF_DSPI_DMCR_FRZ           (0x08000000)            /* Freeze */
-+#define MCF_DSPI_DMCR_DCONF(x)      (((x)&0x00000003)<<28)  /* DSPI configuration */
-+#define MCF_DSPI_DMCR_CONT_SCKE     (0x40000000)            /* Continuous SCK enable */
-+#define MCF_DSPI_DMCR_MSTR          (0x80000000)            /* Master/Slave mode select */
-+#define MCF_DSPI_DMCR_DCONF_SPI     (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS7_LOW    (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS7_HIGH   (0x00800000)
-+#define MCF_DSPI_DMCR_PCSIS6_LOW    (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS6_HIGH   (0x00400000)
-+#define MCF_DSPI_DMCR_PCSIS5_LOW    (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS5_HIGH   (0x00200000)
-+#define MCF_DSPI_DMCR_PCSIS4_LOW    (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS4_HIGH   (0x00100000)
-+#define MCF_DSPI_DMCR_PCSIS3_LOW    (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS3_HIGH   (0x00080000)
-+#define MCF_DSPI_DMCR_PCSIS2_LOW    (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS2_HIGH   (0x00040000)
-+#define MCF_DSPI_DMCR_PCSIS1_LOW    (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS1_HIGH   (0x00020000)
-+#define MCF_DSPI_DMCR_PCSIS0_LOW    (0x00000000)
-+#define MCF_DSPI_DMCR_PCSIS0_HIGH   (0x00010000)
-+
-+/* Bit definitions and macros for DTCR */
-+#define MCF_DSPI_DTCR_SPI_TCNT(x)   (((x)&0x0000FFFF)<<16)  /* SPI transfer count */
-+
-+/* Bit definitions and macros for DCTAR group */
-+#define MCF_DSPI_DCTAR_BR(x)                (((x)&0x0000000F))      /* Baud rate scaler */
-+#define MCF_DSPI_DCTAR_DT(x)                (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR_ASC(x)               (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR_CSSCK(x)             (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR_PBR(x)               (((x)&0x00000003)<<16)  /* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR_PDT(x)               (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR_PASC(x)              (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR_PCSSCK(x)            (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR_LSBFE                (0x01000000)            /* LSB first enable */
-+#define MCF_DSPI_DCTAR_CPHA                 (0x02000000)            /* Clock phase */
-+#define MCF_DSPI_DCTAR_CPOL                 (0x04000000)            /* Clock polarity */
-+#define MCF_DSPI_DCTAR_FMSZ(x)              (((x)&0x0000000F)<<27)  /* Frame size */
-+#define MCF_DSPI_DCTAR_DBR                  (0x80000000)            /* Double baud rate */
-+#define MCF_DSPI_DCTAR_CPOL_LOW             (0x00000000)
-+#define MCF_DSPI_DCTAR_CPOL_HIGH            (0x04000000)
-+#define MCF_DSPI_DCTAR_CPHA_LATCH_RISING    (0x00000000)
-+#define MCF_DSPI_DCTAR_CPHA_LATCH_FALLING   (0x02000000)
-+#define MCF_DSPI_DCTAR_PCSSCK_1CLK          (0x00000000)
-+#define MCF_DSPI_DCTAR_PCSSCK_3CLK          (0x00400000)
-+#define MCF_DSPI_DCTAR_PCSSCK_5CLK          (0x00800000)
-+#define MCF_DSPI_DCTAR_PCSSCK_7CLK          (0x00C00000)
-+#define MCF_DSPI_DCTAR_PASC_1CLK            (0x00000000)
-+#define MCF_DSPI_DCTAR_PASC_3CLK            (0x00100000)
-+#define MCF_DSPI_DCTAR_PASC_5CLK            (0x00200000)
-+#define MCF_DSPI_DCTAR_PASC_7CLK            (0x00300000)
-+#define MCF_DSPI_DCTAR_PDT_1CLK             (0x00000000)
-+#define MCF_DSPI_DCTAR_PDT_3CLK             (0x00040000)
-+#define MCF_DSPI_DCTAR_PDT_5CLK             (0x00080000)
-+#define MCF_DSPI_DCTAR_PDT_7CLK             (0x000C0000)
-+#define MCF_DSPI_DCTAR_PBR_2CLK             (0x00000000)
-+#define MCF_DSPI_DCTAR_PBR_3CLK             (0x00010000)
-+#define MCF_DSPI_DCTAR_PBR_5CLK             (0x00020000)
-+#define MCF_DSPI_DCTAR_PBR_7CLK             (0x00030000)
-+
-+/* Bit definitions and macros for DCTAR0 */
-+#define MCF_DSPI_DCTAR0_BR(x)                   (((x)&0x0000000F))      /* Baud rate scaler */
-+#define MCF_DSPI_DCTAR0_DT(x)                   (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR0_ASC(x)                  (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR0_CSSCK(x)                (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR0_PBR(x)                  (((x)&0x00000003)<<16)  /* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR0_PDT(x)                  (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR0_PASC(x)                 (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR0_PCSSCK(x)               (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR0_LSBFE                   (0x01000000)            /* LSB first enable */
-+#define MCF_DSPI_DCTAR0_CPHA                    (0x02000000)            /* Clock phase */
-+#define MCF_DSPI_DCTAR0_CPOL                    (0x04000000)            /* Clock polarity */
-+#define MCF_DSPI_DCTAR0_FMSZ(x)                 (((x)&0x0000000F)<<27)  /* Frame size */
-+#define MCF_DSPI_DCTAR0_DBR                     (0x80000000)            /* Double baud rate */
-+#define MCF_DSPI_DCTAR0_CPOL_LOW                (0x00000000)
-+#define MCF_DSPI_DCTAR0_CPOL_HIGH               (0x04000000)
-+#define MCF_DSPI_DCTAR0_CPHA_LATCH_RISING       (0x00000000)
-+#define MCF_DSPI_DCTAR0_CPHA_LATCH_FALLING      (0x02000000)
-+#define MCF_DSPI_DCTAR0_PCSSCK_1CLK             (0x00000000)
-+#define MCF_DSPI_DCTAR0_PCSSCK_3CLK             (0x00400000)
-+#define MCF_DSPI_DCTAR0_PCSSCK_5CLK             (0x00800000)
-+#define MCF_DSPI_DCTAR0_PCSSCK_7CLK             (0x00C00000)
-+#define MCF_DSPI_DCTAR0_PASC_1CLK               (0x00000000)
-+#define MCF_DSPI_DCTAR0_PASC_3CLK               (0x00100000)
-+#define MCF_DSPI_DCTAR0_PASC_5CLK               (0x00200000)
-+#define MCF_DSPI_DCTAR0_PASC_7CLK               (0x00300000)
-+#define MCF_DSPI_DCTAR0_PDT_1CLK                (0x00000000)
-+#define MCF_DSPI_DCTAR0_PDT_3CLK                (0x00040000)
-+#define MCF_DSPI_DCTAR0_PDT_5CLK                (0x00080000)
-+#define MCF_DSPI_DCTAR0_PDT_7CLK                (0x000C0000)
-+#define MCF_DSPI_DCTAR0_PBR_2CLK                (0x00000000)
-+#define MCF_DSPI_DCTAR0_PBR_3CLK                (0x00010000)
-+#define MCF_DSPI_DCTAR0_PBR_5CLK                (0x00020000)
-+#define MCF_DSPI_DCTAR0_PBR_7CLK                (0x00030000)
-+
-+/* Bit definitions and macros for DCTAR1 */
-+#define MCF_DSPI_DCTAR1_BR(x)       (((x)&0x0000000F))      /* Baud rate scaler */
-+#define MCF_DSPI_DCTAR1_DT(x)       (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR1_ASC(x)      (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR1_CSSCK(x)    (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR1_PBR(x)      (((x)&0x00000003)<<16)  /* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR1_PDT(x)      (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR1_PASC(x)     (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR1_PCSSCK(x)   (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR1_LSBFE       (0x01000000)            /* LSB first enable */
-+#define MCF_DSPI_DCTAR1_CPHA        (0x02000000)            /* Clock phase */
-+#define MCF_DSPI_DCTAR1_CPOL        (0x04000000)            /* Clock polarity */
-+#define MCF_DSPI_DCTAR1_FMSZ(x)     (((x)&0x0000000F)<<27)  /* Frame size */
-+#define MCF_DSPI_DCTAR1_DBR         (0x80000000)            /* Double baud rate */
-+
-+/* Bit definitions and macros for DCTAR2 */
-+#define MCF_DSPI_DCTAR2_BR(x)       (((x)&0x0000000F))      /* Baud rate scaler */
-+#define MCF_DSPI_DCTAR2_DT(x)       (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR2_ASC(x)      (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR2_CSSCK(x)    (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR2_PBR(x)      (((x)&0x00000003)<<16)  /* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR2_PDT(x)      (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR2_PASC(x)     (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR2_PCSSCK(x)   (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR2_LSBFE       (0x01000000)            /* LSB first enable */
-+#define MCF_DSPI_DCTAR2_CPHA        (0x02000000)            /* Clock phase */
-+#define MCF_DSPI_DCTAR2_CPOL        (0x04000000)            /* Clock polarity */
-+#define MCF_DSPI_DCTAR2_FMSZ(x)     (((x)&0x0000000F)<<27)  /* Frame size */
-+#define MCF_DSPI_DCTAR2_DBR         (0x80000000)            /* Double baud rate */
-+
-+/* Bit definitions and macros for DCTAR3 */
-+#define MCF_DSPI_DCTAR3_BR(x)       (((x)&0x0000000F))      /* Baud rate scaler */
-+#define MCF_DSPI_DCTAR3_DT(x)       (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR3_ASC(x)      (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR3_CSSCK(x)    (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR3_PBR(x)      (((x)&0x00000003)<<16)  /* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR3_PDT(x)      (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR3_PASC(x)     (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR3_PCSSCK(x)   (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR3_LSBFE       (0x01000000)            /* LSB first enable */
-+#define MCF_DSPI_DCTAR3_CPHA        (0x02000000)            /* Clock phase */
-+#define MCF_DSPI_DCTAR3_CPOL        (0x04000000)            /* Clock polarity */
-+#define MCF_DSPI_DCTAR3_FMSZ(x)     (((x)&0x0000000F)<<27)  /* Frame size */
-+#define MCF_DSPI_DCTAR3_DBR         (0x80000000)            /* Double baud rate */
-+
-+/* Bit definitions and macros for DCTAR4 */
-+#define MCF_DSPI_DCTAR4_BR(x)       (((x)&0x0000000F))      /* Baud rate scaler */
-+#define MCF_DSPI_DCTAR4_DT(x)       (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR4_ASC(x)      (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR4_CSSCK(x)    (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR4_PBR(x)      (((x)&0x00000003)<<16)  /* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR4_PDT(x)      (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR4_PASC(x)     (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR4_PCSSCK(x)   (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR4_LSBFE       (0x01000000)            /* LSB first enable */
-+#define MCF_DSPI_DCTAR4_CPHA        (0x02000000)            /* Clock phase */
-+#define MCF_DSPI_DCTAR4_CPOL        (0x04000000)            /* Clock polarity */
-+#define MCF_DSPI_DCTAR4_FMSZ(x)     (((x)&0x0000000F)<<27)  /* Frame size */
-+#define MCF_DSPI_DCTAR4_DBR         (0x80000000)            /* Double baud rate */
-+
-+/* Bit definitions and macros for DCTAR5 */
-+#define MCF_DSPI_DCTAR5_BR(x)       (((x)&0x0000000F))      /* Baud rate scaler */
-+#define MCF_DSPI_DCTAR5_DT(x)       (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR5_ASC(x)      (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR5_CSSCK(x)    (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR5_PBR(x)      (((x)&0x00000003)<<16)  /* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR5_PDT(x)      (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR5_PASC(x)     (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR5_PCSSCK(x)   (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR5_LSBFE       (0x01000000)            /* LSB first enable */
-+#define MCF_DSPI_DCTAR5_CPHA        (0x02000000)            /* Clock phase */
-+#define MCF_DSPI_DCTAR5_CPOL        (0x04000000)            /* Clock polarity */
-+#define MCF_DSPI_DCTAR5_FMSZ(x)     (((x)&0x0000000F)<<27)  /* Frame size */
-+#define MCF_DSPI_DCTAR5_DBR         (0x80000000)            /* Double baud rate */
-+
-+/* Bit definitions and macros for DCTAR6 */
-+#define MCF_DSPI_DCTAR6_BR(x)       (((x)&0x0000000F))      /* Baud rate scaler */
-+#define MCF_DSPI_DCTAR6_DT(x)       (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR6_ASC(x)      (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR6_CSSCK(x)    (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR6_PBR(x)      (((x)&0x00000003)<<16)  /* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR6_PDT(x)      (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR6_PASC(x)     (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR6_PCSSCK(x)   (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR6_LSBFE       (0x01000000)            /* LSB first enable */
-+#define MCF_DSPI_DCTAR6_CPHA        (0x02000000)            /* Clock phase */
-+#define MCF_DSPI_DCTAR6_CPOL        (0x04000000)            /* Clock polarity */
-+#define MCF_DSPI_DCTAR6_FMSZ(x)     (((x)&0x0000000F)<<27)  /* Frame size */
-+#define MCF_DSPI_DCTAR6_DBR         (0x80000000)            /* Double baud rate */
-+
-+/* Bit definitions and macros for DCTAR7 */
-+#define MCF_DSPI_DCTAR7_BR(x)       (((x)&0x0000000F))      /* Baud rate scaler */
-+#define MCF_DSPI_DCTAR7_DT(x)       (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
-+#define MCF_DSPI_DCTAR7_ASC(x)      (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
-+#define MCF_DSPI_DCTAR7_CSSCK(x)    (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
-+#define MCF_DSPI_DCTAR7_PBR(x)      (((x)&0x00000003)<<16)  /* Baud rate prescaler */
-+#define MCF_DSPI_DCTAR7_PDT(x)      (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
-+#define MCF_DSPI_DCTAR7_PASC(x)     (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
-+#define MCF_DSPI_DCTAR7_PCSSCK(x)   (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
-+#define MCF_DSPI_DCTAR7_LSBFE       (0x01000000)            /* LSB first enable */
-+#define MCF_DSPI_DCTAR7_CPHA        (0x02000000)            /* Clock phase */
-+#define MCF_DSPI_DCTAR7_CPOL        (0x04000000)            /* Clock polarity */
-+#define MCF_DSPI_DCTAR7_FMSZ(x)     (((x)&0x0000000F)<<27)  /* Frame size */
-+#define MCF_DSPI_DCTAR7_DBR         (0x80000000)            /* Double baud rate */
-+
-+/* Bit definitions and macros for DSR */
-+#define MCF_DSPI_DSR_RXPTR(x)   (((x)&0x0000000F))      /* Receive next pointer */
-+#define MCF_DSPI_DSR_RXCTR(x)   (((x)&0x0000000F)<<4)   /* Receive FIFO counter */
-+#define MCF_DSPI_DSR_TXPTR(x)   (((x)&0x0000000F)<<8)   /* Transmit next pointer */
-+#define MCF_DSPI_DSR_TXCTR(x)   (((x)&0x0000000F)<<12)  /* Transmit FIFO counter */
-+#define MCF_DSPI_DSR_RFDF       (0x00020000)            /* Receive FIFO drain flag */
-+#define MCF_DSPI_DSR_RFOF       (0x00080000)            /* Receive FIFO overflow flag */
-+#define MCF_DSPI_DSR_TFFF       (0x02000000)            /* Transmit FIFO fill flag */
-+#define MCF_DSPI_DSR_TFUF       (0x08000000)            /* Transmit FIFO underflow flag */
-+#define MCF_DSPI_DSR_EOQF       (0x10000000)            /* End of queue flag */
-+#define MCF_DSPI_DSR_TXRXS      (0x40000000)            /* Tx and Rx status (enabled | disabled) */
-+#define MCF_DSPI_DSR_TCF        (0x80000000)            /* Transfer complete flag */
-+
-+/* Bit definitions and macros for DRSER */
-+#define MCF_DSPI_DRSER_RFDFS    (0x00010000)    /* Receive FIFO drain DMA or interrupt select */
-+#define MCF_DSPI_DRSER_RFDFE    (0x00020000)    /* Receive FIFO drain request enable */
-+#define MCF_DSPI_DRSER_RFOFE    (0x00080000)    /* Receive FIFO overflow request enable */
-+#define MCF_DSPI_DRSER_TFFFS    (0x01000000)    /* Transmit FIFO fill DMA or interrupt select */
-+#define MCF_DSPI_DRSER_TFFFE    (0x02000000)    /* Transmit FIFO fill request enable */
-+#define MCF_DSPI_DRSER_TFUFE    (0x08000000)    /* Transmit FIFO underflow request enable */
-+#define MCF_DSPI_DRSER_EOQFE    (0x10000000)    /* DSPI finished request enable */
-+#define MCF_DSPI_DRSER_TCFE     (0x80000000)    /* Transmission complete request enable */
-+
-+/* Bit definitions and macros for DTFR */
-+#define MCF_DSPI_DTFR_TXDATA(x)     (((x)&0x0000FFFF))      /* Transmit data */
-+#define MCF_DSPI_DTFR_PCS0          (0x00010000)            /* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFR_PCS1          (0x00020000)            /* Peripheral chip select 1 */
-+#define MCF_DSPI_DTFR_PCS2          (0x00040000)            /* Peripheral chip select 2 */
-+#define MCF_DSPI_DTFR_PCS3          (0x00080000)            /* Peripheral chip select 3 */
-+#define MCF_DSPI_DTFR_PCS4          (0x00100000)            /* Peripheral chip select 4 */
-+#define MCF_DSPI_DTFR_PCS5          (0x00200000)            /* Peripheral chip select 5 */
-+#define MCF_DSPI_DTFR_PCS6          (0x00400000)            /* Peripheral chip select 6 */
-+#define MCF_DSPI_DTFR_PCS7          (0x00800000)            /* Peripheral chip select 7 */
-+#define MCF_DSPI_DTFR_CTCNT         (0x04000000)            /* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFR_EOQ           (0x08000000)            /* End of queue */
-+#define MCF_DSPI_DTFR_CTAS(x)       (((x)&0x00000007)<<28)  /* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFR_CONT          (0x80000000)            /* Continuous peripheral chip-select enable */
-+
-+/* Bit definitions and macros for DRFR */
-+#define MCF_DSPI_DRFR_RXDATA(x)     (((x)&0x0000FFFF))  /* Receive data */
-+
-+/* Bit definitions and macros for DTFDR group */
-+#define MCF_DSPI_DTFDR_TXDATA(x)    (((x)&0x0000FFFF))      /* Transmit data */
-+#define MCF_DSPI_DTFDR_PCS0         (0x00010000)            /* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR_PCS1         (0x00020000)            /* Peripheral chip select 1 */
-+#define MCF_DSPI_DTFDR_PCS2         (0x00040000)            /* Peripheral chip select 2 */
-+#define MCF_DSPI_DTFDR_PCS3         (0x00080000)            /* Peripheral chip select 3 */
-+#define MCF_DSPI_DTFDR_PCS4         (0x00100000)            /* Peripheral chip select 4 */
-+#define MCF_DSPI_DTFDR_PCS5         (0x00200000)            /* Peripheral chip select 5 */
-+#define MCF_DSPI_DTFDR_PCS6         (0x00400000)            /* Peripheral chip select 6 */
-+#define MCF_DSPI_DTFDR_PCS7         (0x00800000)            /* Peripheral chip select 7 */
-+#define MCF_DSPI_DTFDR_CTCNT        (0x04000000)            /* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFDR_EOQ          (0x08000000)            /* End of queue */
-+#define MCF_DSPI_DTFDR_CTAS(x)      (((x)&0x00000007)<<28)  /* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFDR_CONT         (0x80000000)            /* Continuous peripheral chip-select enable */
-+
-+/* Bit definitions and macros for DTFDR0 */
-+#define MCF_DSPI_DTFDR0_TXDATA(x)   (((x)&0x0000FFFF))      /* Transmit data */
-+#define MCF_DSPI_DTFDR0_PCS0        (0x00010000)            /* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR0_PCS1        (0x00020000)            /* Peripheral chip select 1 */
-+#define MCF_DSPI_DTFDR0_PCS2        (0x00040000)            /* Peripheral chip select 2 */
-+#define MCF_DSPI_DTFDR0_PCS3        (0x00080000)            /* Peripheral chip select 3 */
-+#define MCF_DSPI_DTFDR0_PCS4        (0x00100000)            /* Peripheral chip select 4 */
-+#define MCF_DSPI_DTFDR0_PCS5        (0x00200000)            /* Peripheral chip select 5 */
-+#define MCF_DSPI_DTFDR0_PCS6        (0x00400000)            /* Peripheral chip select 6 */
-+#define MCF_DSPI_DTFDR0_PCS7        (0x00800000)            /* Peripheral chip select 7 */
-+#define MCF_DSPI_DTFDR0_CTCNT       (0x04000000)            /* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFDR0_EOQ         (0x08000000)            /* End of queue */
-+#define MCF_DSPI_DTFDR0_CTAS(x)     (((x)&0x00000007)<<28)  /* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFDR0_CONT        (0x80000000)            /* Continuous peripheral chip-select enable */
-+
-+/* Bit definitions and macros for DTFDR1 */
-+#define MCF_DSPI_DTFDR1_TXDATA(x)   (((x)&0x0000FFFF))      /* Transmit data */
-+#define MCF_DSPI_DTFDR1_PCS0        (0x00010000)            /* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR1_PCS1        (0x00020000)            /* Peripheral chip select 1 */
-+#define MCF_DSPI_DTFDR1_PCS2        (0x00040000)            /* Peripheral chip select 2 */
-+#define MCF_DSPI_DTFDR1_PCS3        (0x00080000)            /* Peripheral chip select 3 */
-+#define MCF_DSPI_DTFDR1_PCS4        (0x00100000)            /* Peripheral chip select 4 */
-+#define MCF_DSPI_DTFDR1_PCS5        (0x00200000)            /* Peripheral chip select 5 */
-+#define MCF_DSPI_DTFDR1_PCS6        (0x00400000)            /* Peripheral chip select 6 */
-+#define MCF_DSPI_DTFDR1_PCS7        (0x00800000)            /* Peripheral chip select 7 */
-+#define MCF_DSPI_DTFDR1_CTCNT       (0x04000000)            /* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFDR1_EOQ         (0x08000000)            /* End of queue */
-+#define MCF_DSPI_DTFDR1_CTAS(x)     (((x)&0x00000007)<<28)  /* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFDR1_CONT        (0x80000000)            /* Continuous peripheral chip-select enable */
-+
-+/* Bit definitions and macros for DTFDR2 */
-+#define MCF_DSPI_DTFDR2_TXDATA(x)   (((x)&0x0000FFFF))      /* Transmit data */
-+#define MCF_DSPI_DTFDR2_PCS0        (0x00010000)            /* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR2_PCS1        (0x00020000)            /* Peripheral chip select 1 */
-+#define MCF_DSPI_DTFDR2_PCS2        (0x00040000)            /* Peripheral chip select 2 */
-+#define MCF_DSPI_DTFDR2_PCS3        (0x00080000)            /* Peripheral chip select 3 */
-+#define MCF_DSPI_DTFDR2_PCS4        (0x00100000)            /* Peripheral chip select 4 */
-+#define MCF_DSPI_DTFDR2_PCS5        (0x00200000)            /* Peripheral chip select 5 */
-+#define MCF_DSPI_DTFDR2_PCS6        (0x00400000)            /* Peripheral chip select 6 */
-+#define MCF_DSPI_DTFDR2_PCS7        (0x00800000)            /* Peripheral chip select 7 */
-+#define MCF_DSPI_DTFDR2_CTCNT       (0x04000000)            /* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFDR2_EOQ         (0x08000000)            /* End of queue */
-+#define MCF_DSPI_DTFDR2_CTAS(x)     (((x)&0x00000007)<<28)  /* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFDR2_CONT        (0x80000000)            /* Continuous peripheral chip-select enable */
-+
-+/* Bit definitions and macros for DTFDR3 */
-+#define MCF_DSPI_DTFDR3_TXDATA(x)   (((x)&0x0000FFFF))      /* Transmit data */
-+#define MCF_DSPI_DTFDR3_PCS0        (0x00010000)            /* Peripheral chip select 0 */
-+#define MCF_DSPI_DTFDR3_PCS1        (0x00020000)            /* Peripheral chip select 1 */
-+#define MCF_DSPI_DTFDR3_PCS2        (0x00040000)            /* Peripheral chip select 2 */
-+#define MCF_DSPI_DTFDR3_PCS3        (0x00080000)            /* Peripheral chip select 3 */
-+#define MCF_DSPI_DTFDR3_PCS4        (0x00100000)            /* Peripheral chip select 4 */
-+#define MCF_DSPI_DTFDR3_PCS5        (0x00200000)            /* Peripheral chip select 5 */
-+#define MCF_DSPI_DTFDR3_PCS6        (0x00400000)            /* Peripheral chip select 6 */
-+#define MCF_DSPI_DTFDR3_PCS7        (0x00800000)            /* Peripheral chip select 7 */
-+#define MCF_DSPI_DTFDR3_CTCNT       (0x04000000)            /* Clear SPI transfer counter */
-+#define MCF_DSPI_DTFDR3_EOQ         (0x08000000)            /* End of queue */
-+#define MCF_DSPI_DTFDR3_CTAS(x)     (((x)&0x00000007)<<28)  /* Clock and transfer attributes select */
-+#define MCF_DSPI_DTFDR3_CONT        (0x80000000)            /* Continuous peripheral chip-select enable */
-+
-+/* Bit definitions and macros for DRFDR group */
-+#define MCF_DSPI_DRFDR_RXDATA(x)    (((x)&0x0000FFFF))  /* Receive data */
-+
-+/* Bit definitions and macros for DRFDR0 */
-+#define MCF_DSPI_DRFDR0_RXDATA(x)   (((x)&0x0000FFFF))  /* Receive data */
-+
-+/* Bit definitions and macros for DRFDR1 */
-+#define MCF_DSPI_DRFDR1_RXDATA(x)   (((x)&0x0000FFFF))  /* Receive data */
-+
-+/* Bit definitions and macros for DRFDR2 */
-+#define MCF_DSPI_DRFDR2_RXDATA(x)   (((x)&0x0000FFFF))  /* Receive data */
-+
-+/* Bit definitions and macros for DRFDR3 */
-+#define MCF_DSPI_DRFDR3_RXDATA(x)   (((x)&0x0000FFFF))  /* Receive data */
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_DSPI_H__ */
---- /dev/null
-+++ b/include/asm-m68k/mcf5445x_dtim.h
-@@ -0,0 +1,87 @@
-+/*
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_DTIM_H__
-+#define __MCF5445X_DTIM_H__
-+
-+/*********************************************************************
-+*
-+* DMA Timers (DTIM)
-+*
-+*********************************************************************/
-+/* Register read/write macros */
-+#define MCF_DTIM0_DTMR	0xFC070000	/* DMA Timer Mode Register */
-+#define MCF_DTIM0_DTXMR	0xFC070002	/* DMA Timer Extended Mode Register */
-+#define MCF_DTIM0_DTER	0xFC070003	/* DMA Timer Event Register */
-+#define MCF_DTIM0_DTRR	0xFC070004	/* DMA Timer Reference Register */
-+#define MCF_DTIM0_DTCR	0xFC070008	/* DMA Timer Capture Register */
-+#define MCF_DTIM0_DTCN	0xFC07000C	/* DMA Timer Counter Register */
-+#define MCF_DTIM1_DTMR	0xFC074000	/* DMA Timer Mode Register */
-+#define MCF_DTIM1_DTXMR	0xFC074002	/* DMA Timer Extended Mode Register */
-+#define MCF_DTIM1_DTER	0xFC074003	/* DMA Timer Event Register */
-+#define MCF_DTIM1_DTRR	0xFC074004	/* DMA Timer Reference Register */
-+#define MCF_DTIM1_DTCR	0xFC074008	/* DMA Timer Capture Register */
-+#define MCF_DTIM1_DTCN	0xFC07400C	/* DMA Timer Counter Register */
-+#define MCF_DTIM2_DTMR	0xFC078000	/* DMA Timer Mode Register */
-+#define MCF_DTIM2_DTXMR	0xFC078002	/* DMA Timer Extended Mode Register */
-+#define MCF_DTIM2_DTER	0xFC078003	/* DMA Timer Event Register */
-+#define MCF_DTIM2_DTRR	0xFC078004	/* DMA Timer Reference Register */
-+#define MCF_DTIM2_DTCR	0xFC078008	/* DMA Timer Capture Register */
-+#define MCF_DTIM2_DTCN	0xFC07800C	/* DMA Timer Counter Register */
-+#define MCF_DTIM3_DTMR	0xFC07C000	/* DMA Timer Mode Register */
-+#define MCF_DTIM3_DTXMR	0xFC07C002	/* DMA Timer Extended Mode Register */
-+#define MCF_DTIM3_DTER	0xFC07C003	/* DMA Timer Event Register */
-+#define MCF_DTIM3_DTRR	0xFC07C004	/* DMA Timer Reference Register */
-+#define MCF_DTIM3_DTCR	0xFC07C008	/* DMA Timer Capture Register */
-+#define MCF_DTIM3_DTCN	0xFC07C00C	/* DMA Timer Counter Register */
-+
-+/* Parameterized register read/write macros for multiple modules */
-+#define MCF_DTIM_DTMR(x)	0xFC070000+((x)*0x4000)  /* DMA Timer Mode Register */
-+#define MCF_DTIM_DTXMR(x)	0xFC070002+((x)*0x4000)  /* DMA Timer Extended Mode Register */
-+#define MCF_DTIM_DTER(x)	0xFC070003+((x)*0x4000)  /* DMA Timer Event Register */
-+#define MCF_DTIM_DTRR(x)	0xFC070004+((x)*0x4000)  /* DMA Timer Reference Register */
-+#define MCF_DTIM_DTCR(x)	0xFC070008+((x)*0x4000)  /* DMA Timer Capture Register */
-+#define MCF_DTIM_DTCN(x)	0xFC07000C+((x)*0x4000)  /* DMA Timer Counter Register */
-+
-+/* Bit definitions and macros for DTMR */
-+#define MCF_DTIM_DTMR_RST	(0x0001)		/* Reset */
-+#define MCF_DTIM_DTMR_CLK(x)	(((x)&0x0003)<<1)	/* Input clock source */
-+#define MCF_DTIM_DTMR_FRR	(0x0008)		/* Free run/restart */
-+#define MCF_DTIM_DTMR_ORRI	(0x0010)		/* Output reference request/interrupt enable */
-+#define MCF_DTIM_DTMR_OM	(0x0020)		/* Output Mode */
-+#define MCF_DTIM_DTMR_CE(x)	(((x)&0x0003)<<6)	/* Capture Edge */
-+#define MCF_DTIM_DTMR_PS(x)	(((x)&0x00FF)<<8)	/* Prescaler value */
-+#define MCF_DTIM_DTMR_RST_EN	(0x0001)
-+#define MCF_DTIM_DTMR_RST_RST	(0x0000)
-+#define MCF_DTIM_DTMR_CE_ANY	(0x00C0)
-+#define MCF_DTIM_DTMR_CE_FALL	(0x0080)
-+#define MCF_DTIM_DTMR_CE_RISE	(0x0040)
-+#define MCF_DTIM_DTMR_CE_NONE	(0x0000)
-+#define MCF_DTIM_DTMR_CLK_DTIN	(0x0006)
-+#define MCF_DTIM_DTMR_CLK_DIV16	(0x0004)
-+#define MCF_DTIM_DTMR_CLK_DIV1	(0x0002)
-+#define MCF_DTIM_DTMR_CLK_STOP	(0x0000)
-+
-+/* Bit definitions and macros for DTXMR */
-+#define MCF_DTIM_DTXMR_MODE16	(0x01)	/* Increment Mode */
-+#define MCF_DTIM_DTXMR_DMAEN	(0x80)	/* DMA request */
-+
-+/* Bit definitions and macros for DTER */
-+#define MCF_DTIM_DTER_CAP	(0x01)	/* Capture event */
-+#define MCF_DTIM_DTER_REF	(0x02)	/* Output reference event */
-+
-+/* Interrupts used for system timers */
-+#define MCFSIM_ICR_TIMER1       (0xFC048040+32)
-+#define MCFSIM_ICR_TIMER2       (0xFC048040+33)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_DTIM_H__ */
---- /dev/null
-+++ b/include/asm-m68k/mcf5445x_edma.h
-@@ -0,0 +1,1472 @@
-+/*
-+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+#ifndef __MCF5445X_EDMA_H__
-+#define __MCF5445X_EDMA_H__
-+
-+/*
-+ * Enhanced DMA (EDMA)
-+ */
-+
-+/* Channels */
-+#define MCF_EDMA_CHAN_DREQ0	0	/* External DMA request 0 */
-+#define MCF_EDMA_CHAN_DREQ1	1	/* External DMA request 1 */
-+#define MCF_EDMA_CHAN_UART0_RX	2	/* UART0 Receive */
-+#define MCF_EDMA_CHAN_UART0_TX	3	/* UART0 Transmit */
-+#define MCF_EDMA_CHAN_UART1_RX	4	/* UART1 Receive */
-+#define MCF_EDMA_CHAN_UART1_TX	5	/* UART1 Transmit */
-+#define MCF_EDMA_CHAN_UART2_RX	6	/* UART2 Receive */
-+#define MCF_EDMA_CHAN_UART2_TX	7	/* UART2 Transmit */
-+#define MCF_EDMA_CHAN_TIMER0	8	/* Timer 0 / SSI0 Rx */
-+#define MCF_EDMA_CHAN_TIMER1	9	/* Timer 1 / SSI1 Rx */
-+#define MCF_EDMA_CHAN_TIMER2	10	/* Timer 2 / SSI0 Tx */
-+#define MCF_EDMA_CHAN_TIMER3	11	/* Timer 3 / SSI1 Tx */
-+#define MCF_EDMA_CHAN_DSPI_RX	12	/* DSPI Receive */
-+#define MCF_EDMA_CHAN_DSPI_TX	13	/* DSPI Transmit */
-+#define MCF_EDMA_CHAN_ATA_RX	14	/* ATA Receive */
-+#define MCF_EDMA_CHAN_ATA_TX	15	/* ATA Transmit */
-+
-+/* Register read/write macros */
-+#define MCF_EDMA_CR                     MCF_REG32(0xFC044000)
-+#define MCF_EDMA_ES                     MCF_REG32(0xFC044004)
-+#define MCF_EDMA_ERQ                    MCF_REG16(0xFC04400E)
-+#define MCF_EDMA_EEI                    MCF_REG16(0xFC044016)
-+#define MCF_EDMA_SERQ                   MCF_REG08(0xFC044018)
-+#define MCF_EDMA_CERQ                   MCF_REG08(0xFC044019)
-+#define MCF_EDMA_SEEI                   MCF_REG08(0xFC04401A)
-+#define MCF_EDMA_CEEI                   MCF_REG08(0xFC04401B)
-+#define MCF_EDMA_CINT                   MCF_REG08(0xFC04401C)
-+#define MCF_EDMA_CERR                   MCF_REG08(0xFC04401D)
-+#define MCF_EDMA_SSRT                   MCF_REG08(0xFC04401E)
-+#define MCF_EDMA_CDNE                   MCF_REG08(0xFC04401F)
-+#define MCF_EDMA_INTR                   MCF_REG16(0xFC044026)
-+#define MCF_EDMA_ERR                    MCF_REG16(0xFC04402E)
-+#define MCF_EDMA_DCHPRI0                MCF_REG08(0xFC044100)
-+#define MCF_EDMA_DCHPRI1                MCF_REG08(0xFC044101)
-+#define MCF_EDMA_DCHPRI2                MCF_REG08(0xFC044102)
-+#define MCF_EDMA_DCHPRI3                MCF_REG08(0xFC044103)
-+#define MCF_EDMA_DCHPRI4                MCF_REG08(0xFC044104)
-+#define MCF_EDMA_DCHPRI5                MCF_REG08(0xFC044105)
-+#define MCF_EDMA_DCHPRI6                MCF_REG08(0xFC044106)
-+#define MCF_EDMA_DCHPRI7                MCF_REG08(0xFC044107)
-+#define MCF_EDMA_DCHPRI8                MCF_REG08(0xFC044108)
-+#define MCF_EDMA_DCHPRI9                MCF_REG08(0xFC044109)
-+#define MCF_EDMA_DCHPRI10               MCF_REG08(0xFC04410A)
-+#define MCF_EDMA_DCHPRI11               MCF_REG08(0xFC04410B)
-+#define MCF_EDMA_DCHPRI12               MCF_REG08(0xFC04410C)
-+#define MCF_EDMA_DCHPRI13               MCF_REG08(0xFC04410D)
-+#define MCF_EDMA_DCHPRI14               MCF_REG08(0xFC04410E)
-+#define MCF_EDMA_DCHPRI15               MCF_REG08(0xFC04410F)
-+#define MCF_EDMA_TCD0_SADDR             MCF_REG32(0xFC045000)
-+#define MCF_EDMA_TCD0_ATTR              MCF_REG16(0xFC045004)
-+#define MCF_EDMA_TCD0_SOFF              MCF_REG16(0xFC045006)
-+#define MCF_EDMA_TCD0_NBYTES            MCF_REG32(0xFC045008)
-+#define MCF_EDMA_TCD0_SLAST             MCF_REG32(0xFC04500C)
-+#define MCF_EDMA_TCD0_DADDR             MCF_REG32(0xFC045010)
-+#define MCF_EDMA_TCD0_CITER_ELINK       MCF_REG16(0xFC045014)
-+#define MCF_EDMA_TCD0_CITER             MCF_REG16(0xFC045014)
-+#define MCF_EDMA_TCD0_DOFF              MCF_REG16(0xFC045016)
-+#define MCF_EDMA_TCD0_DLAST_SGA         MCF_REG32(0xFC045018)
-+#define MCF_EDMA_TCD0_BITER_ELINK       MCF_REG16(0xFC04501C)
-+#define MCF_EDMA_TCD0_BITER             MCF_REG16(0xFC04501C)
-+#define MCF_EDMA_TCD0_CSR               MCF_REG16(0xFC04501E)
-+#define MCF_EDMA_TCD1_SADDR             MCF_REG32(0xFC045020)
-+#define MCF_EDMA_TCD1_ATTR              MCF_REG16(0xFC045024)
-+#define MCF_EDMA_TCD1_SOFF              MCF_REG16(0xFC045026)
-+#define MCF_EDMA_TCD1_NBYTES            MCF_REG32(0xFC045028)
-+#define MCF_EDMA_TCD1_SLAST             MCF_REG32(0xFC04502C)
-+#define MCF_EDMA_TCD1_DADDR             MCF_REG32(0xFC045030)
-+#define MCF_EDMA_TCD1_CITER_ELINK       MCF_REG16(0xFC045034)
-+#define MCF_EDMA_TCD1_CITER             MCF_REG16(0xFC045034)
-+#define MCF_EDMA_TCD1_DOFF              MCF_REG16(0xFC045036)
-+#define MCF_EDMA_TCD1_DLAST_SGA         MCF_REG32(0xFC045038)
-+#define MCF_EDMA_TCD1_BITER             MCF_REG16(0xFC04503C)
-+#define MCF_EDMA_TCD1_BITER_ELINK       MCF_REG16(0xFC04503C)
-+#define MCF_EDMA_TCD1_CSR               MCF_REG16(0xFC04503E)
-+#define MCF_EDMA_TCD2_SADDR             MCF_REG32(0xFC045040)
-+#define MCF_EDMA_TCD2_ATTR              MCF_REG16(0xFC045044)
-+#define MCF_EDMA_TCD2_SOFF              MCF_REG16(0xFC045046)
-+#define MCF_EDMA_TCD2_NBYTES            MCF_REG32(0xFC045048)
-+#define MCF_EDMA_TCD2_SLAST             MCF_REG32(0xFC04504C)
-+#define MCF_EDMA_TCD2_DADDR             MCF_REG32(0xFC045050)
-+#define MCF_EDMA_TCD2_CITER             MCF_REG16(0xFC045054)
-+#define MCF_EDMA_TCD2_CITER_ELINK       MCF_REG16(0xFC045054)
-+#define MCF_EDMA_TCD2_DOFF              MCF_REG16(0xFC045056)
-+#define MCF_EDMA_TCD2_DLAST_SGA         MCF_REG32(0xFC045058)
-+#define MCF_EDMA_TCD2_BITER_ELINK       MCF_REG16(0xFC04505C)
-+#define MCF_EDMA_TCD2_BITER             MCF_REG16(0xFC04505C)
-+#define MCF_EDMA_TCD2_CSR               MCF_REG16(0xFC04505E)
-+#define MCF_EDMA_TCD3_SADDR             MCF_REG32(0xFC045060)
-+#define MCF_EDMA_TCD3_ATTR              MCF_REG16(0xFC045064)
-+#define MCF_EDMA_TCD3_SOFF              MCF_REG16(0xFC045066)
-+#define MCF_EDMA_TCD3_NBYTES            MCF_REG32(0xFC045068)
-+#define MCF_EDMA_TCD3_SLAST             MCF_REG32(0xFC04506C)
-+#define MCF_EDMA_TCD3_DADDR             MCF_REG32(0xFC045070)
-+#define MCF_EDMA_TCD3_CITER             MCF_REG16(0xFC045074)
-+#define MCF_EDMA_TCD3_CITER_ELINK       MCF_REG16(0xFC045074)
-+#define MCF_EDMA_TCD3_DOFF              MCF_REG16(0xFC045076)
-+#define MCF_EDMA_TCD3_DLAST_SGA         MCF_REG32(0xFC045078)
-+#define MCF_EDMA_TCD3_BITER_ELINK       MCF_REG16(0xFC04507C)
-+#define MCF_EDMA_TCD3_BITER             MCF_REG16(0xFC04507C)
-+#define MCF_EDMA_TCD3_CSR               MCF_REG16(0xFC04507E)
-+#define MCF_EDMA_TCD4_SADDR             MCF_REG32(0xFC045080)
-+#define MCF_EDMA_TCD4_ATTR              MCF_REG16(0xFC045084)
-+#define MCF_EDMA_TCD4_SOFF              MCF_REG16(0xFC045086)
-+#define MCF_EDMA_TCD4_NBYTES            MCF_REG32(0xFC045088)
-+#define MCF_EDMA_TCD4_SLAST             MCF_REG32(0xFC04508C)
-+#define MCF_EDMA_TCD4_DADDR             MCF_REG32(0xFC045090)
-+#define MCF_EDMA_TCD4_CITER             MCF_REG16(0xFC045094)
-+#define MCF_EDMA_TCD4_CITER_ELINK       MCF_REG16(0xFC045094)
-+#define MCF_EDMA_TCD4_DOFF              MCF_REG16(0xFC045096)
-+#define MCF_EDMA_TCD4_DLAST_SGA         MCF_REG32(0xFC045098)
-+#define MCF_EDMA_TCD4_BITER             MCF_REG16(0xFC04509C)
-+#define MCF_EDMA_TCD4_BITER_ELINK       MCF_REG16(0xFC04509C)
-+#define MCF_EDMA_TCD4_CSR               MCF_REG16(0xFC04509E)
-+#define MCF_EDMA_TCD5_SADDR             MCF_REG32(0xFC0450A0)
-+#define MCF_EDMA_TCD5_ATTR              MCF_REG16(0xFC0450A4)
-+#define MCF_EDMA_TCD5_SOFF              MCF_REG16(0xFC0450A6)
-+#define MCF_EDMA_TCD5_NBYTES            MCF_REG32(0xFC0450A8)
-+#define MCF_EDMA_TCD5_SLAST             MCF_REG32(0xFC0450AC)
-+#define MCF_EDMA_TCD5_DADDR             MCF_REG32(0xFC0450B0)
-+#define MCF_EDMA_TCD5_CITER             MCF_REG16(0xFC0450B4)
-+#define MCF_EDMA_TCD5_CITER_ELINK       MCF_REG16(0xFC0450B4)
-+#define MCF_EDMA_TCD5_DOFF              MCF_REG16(0xFC0450B6)
-+#define MCF_EDMA_TCD5_DLAST_SGA         MCF_REG32(0xFC0450B8)
-+#define MCF_EDMA_TCD5_BITER_ELINK       MCF_REG16(0xFC0450BC)
-+#define MCF_EDMA_TCD5_BITER             MCF_REG16(0xFC0450BC)
-+#define MCF_EDMA_TCD5_CSR               MCF_REG16(0xFC0450BE)
-+#define MCF_EDMA_TCD6_SADDR             MCF_REG32(0xFC0450C0)
-+#define MCF_EDMA_TCD6_ATTR              MCF_REG16(0xFC0450C4)
-+#define MCF_EDMA_TCD6_SOFF              MCF_REG16(0xFC0450C6)
-+#define MCF_EDMA_TCD6_NBYTES            MCF_REG32(0xFC0450C8)
-+#define MCF_EDMA_TCD6_SLAST             MCF_REG32(0xFC0450CC)
-+#define MCF_EDMA_TCD6_DADDR             MCF_REG32(0xFC0450D0)
-+#define MCF_EDMA_TCD6_CITER             MCF_REG16(0xFC0450D4)
-+#define MCF_EDMA_TCD6_CITER_ELINK       MCF_REG16(0xFC0450D4)
-+#define MCF_EDMA_TCD6_DOFF              MCF_REG16(0xFC0450D6)
-+#define MCF_EDMA_TCD6_DLAST_SGA         MCF_REG32(0xFC0450D8)
-+#define MCF_EDMA_TCD6_BITER_ELINK       MCF_REG16(0xFC0450DC)
-+#define MCF_EDMA_TCD6_BITER             MCF_REG16(0xFC0450DC)
-+#define MCF_EDMA_TCD6_CSR               MCF_REG16(0xFC0450DE)
-+#define MCF_EDMA_TCD7_SADDR             MCF_REG32(0xFC0450E0)
-+#define MCF_EDMA_TCD7_ATTR              MCF_REG16(0xFC0450E4)
-+#define MCF_EDMA_TCD7_SOFF              MCF_REG16(0xFC0450E6)
-+#define MCF_EDMA_TCD7_NBYTES            MCF_REG32(0xFC0450E8)
-+#define MCF_EDMA_TCD7_SLAST             MCF_REG32(0xFC0450EC)
-+#define MCF_EDMA_TCD7_DADDR             MCF_REG32(0xFC0450F0)
-+#define MCF_EDMA_TCD7_CITER             MCF_REG16(0xFC0450F4)
-+#define MCF_EDMA_TCD7_CITER_ELINK       MCF_REG16(0xFC0450F4)
-+#define MCF_EDMA_TCD7_DOFF              MCF_REG16(0xFC0450F6)
-+#define MCF_EDMA_TCD7_DLAST_SGA         MCF_REG32(0xFC0450F8)
-+#define MCF_EDMA_TCD7_BITER_ELINK       MCF_REG16(0xFC0450FC)
-+#define MCF_EDMA_TCD7_BITER             MCF_REG16(0xFC0450FC)
-+#define MCF_EDMA_TCD7_CSR               MCF_REG16(0xFC0450FE)
-+#define MCF_EDMA_TCD8_SADDR             MCF_REG32(0xFC045100)
-+#define MCF_EDMA_TCD8_ATTR              MCF_REG16(0xFC045104)
-+#define MCF_EDMA_TCD8_SOFF              MCF_REG16(0xFC045106)
-+#define MCF_EDMA_TCD8_NBYTES            MCF_REG32(0xFC045108)
-+#define MCF_EDMA_TCD8_SLAST             MCF_REG32(0xFC04510C)
-+#define MCF_EDMA_TCD8_DADDR             MCF_REG32(0xFC045110)
-+#define MCF_EDMA_TCD8_CITER             MCF_REG16(0xFC045114)
-+#define MCF_EDMA_TCD8_CITER_ELINK       MCF_REG16(0xFC045114)
-+#define MCF_EDMA_TCD8_DOFF              MCF_REG16(0xFC045116)
-+#define MCF_EDMA_TCD8_DLAST_SGA         MCF_REG32(0xFC045118)
-+#define MCF_EDMA_TCD8_BITER_ELINK       MCF_REG16(0xFC04511C)
-+#define MCF_EDMA_TCD8_BITER             MCF_REG16(0xFC04511C)
-+#define MCF_EDMA_TCD8_CSR               MCF_REG16(0xFC04511E)
-+#define MCF_EDMA_TCD9_SADDR             MCF_REG32(0xFC045120)
-+#define MCF_EDMA_TCD9_ATTR              MCF_REG16(0xFC045124)
-+#define MCF_EDMA_TCD9_SOFF              MCF_REG16(0xFC045126)
-+#define MCF_EDMA_TCD9_NBYTES            MCF_REG32(0xFC045128)
-+#define MCF_EDMA_TCD9_SLAST             MCF_REG32(0xFC04512C)
-+#define MCF_EDMA_TCD9_DADDR             MCF_REG32(0xFC045130)
-+#define MCF_EDMA_TCD9_CITER_ELINK       MCF_REG16(0xFC045134)
-+#define MCF_EDMA_TCD9_CITER             MCF_REG16(0xFC045134)
-+#define MCF_EDMA_TCD9_DOFF              MCF_REG16(0xFC045136)
-+#define MCF_EDMA_TCD9_DLAST_SGA         MCF_REG32(0xFC045138)
-+#define MCF_EDMA_TCD9_BITER_ELINK       MCF_REG16(0xFC04513C)
-+#define MCF_EDMA_TCD9_BITER             MCF_REG16(0xFC04513C)
-+#define MCF_EDMA_TCD9_CSR               MCF_REG16(0xFC04513E)
-+#define MCF_EDMA_TCD10_SADDR            MCF_REG32(0xFC045140)
-+#define MCF_EDMA_TCD10_ATTR             MCF_REG16(0xFC045144)
-+#define MCF_EDMA_TCD10_SOFF             MCF_REG16(0xFC045146)
-+#define MCF_EDMA_TCD10_NBYTES           MCF_REG32(0xFC045148)
-+#define MCF_EDMA_TCD10_SLAST            MCF_REG32(0xFC04514C)
-+#define MCF_EDMA_TCD10_DADDR            MCF_REG32(0xFC045150)
-+#define MCF_EDMA_TCD10_CITER_ELINK      MCF_REG16(0xFC045154)
-+#define MCF_EDMA_TCD10_CITER            MCF_REG16(0xFC045154)
-+#define MCF_EDMA_TCD10_DOFF             MCF_REG16(0xFC045156)
-+#define MCF_EDMA_TCD10_DLAST_SGA        MCF_REG32(0xFC045158)
-+#define MCF_EDMA_TCD10_BITER            MCF_REG16(0xFC04515C)
-+#define MCF_EDMA_TCD10_BITER_ELINK      MCF_REG16(0xFC04515C)
-+#define MCF_EDMA_TCD10_CSR              MCF_REG16(0xFC04515E)
-+#define MCF_EDMA_TCD11_SADDR            MCF_REG32(0xFC045160)
-+#define MCF_EDMA_TCD11_ATTR             MCF_REG16(0xFC045164)
-+#define MCF_EDMA_TCD11_SOFF             MCF_REG16(0xFC045166)
-+#define MCF_EDMA_TCD11_NBYTES           MCF_REG32(0xFC045168)
-+#define MCF_EDMA_TCD11_SLAST            MCF_REG32(0xFC04516C)
-+#define MCF_EDMA_TCD11_DADDR            MCF_REG32(0xFC045170)
-+#define MCF_EDMA_TCD11_CITER            MCF_REG16(0xFC045174)
-+#define MCF_EDMA_TCD11_CITER_ELINK      MCF_REG16(0xFC045174)
-+#define MCF_EDMA_TCD11_DOFF             MCF_REG16(0xFC045176)
-+#define MCF_EDMA_TCD11_DLAST_SGA        MCF_REG32(0xFC045178)
-+#define MCF_EDMA_TCD11_BITER            MCF_REG16(0xFC04517C)
-+#define MCF_EDMA_TCD11_BITER_ELINK      MCF_REG16(0xFC04517C)
-+#define MCF_EDMA_TCD11_CSR              MCF_REG16(0xFC04517E)
-+#define MCF_EDMA_TCD12_SADDR            MCF_REG32(0xFC045180)
-+#define MCF_EDMA_TCD12_ATTR             MCF_REG16(0xFC045184)
-+#define MCF_EDMA_TCD12_SOFF             MCF_REG16(0xFC045186)
-+#define MCF_EDMA_TCD12_NBYTES           MCF_REG32(0xFC045188)
-+#define MCF_EDMA_TCD12_SLAST            MCF_REG32(0xFC04518C)
-+#define MCF_EDMA_TCD12_DADDR            MCF_REG32(0xFC045190)
-+#define MCF_EDMA_TCD12_CITER            MCF_REG16(0xFC045194)
-+#define MCF_EDMA_TCD12_CITER_ELINK      MCF_REG16(0xFC045194)
-+#define MCF_EDMA_TCD12_DOFF             MCF_REG16(0xFC045196)
-+#define MCF_EDMA_TCD12_DLAST_SGA        MCF_REG32(0xFC045198)
-+#define MCF_EDMA_TCD12_BITER            MCF_REG16(0xFC04519C)
-+#define MCF_EDMA_TCD12_BITER_ELINK      MCF_REG16(0xFC04519C)
-+#define MCF_EDMA_TCD12_CSR              MCF_REG16(0xFC04519E)
-+#define MCF_EDMA_TCD13_SADDR            MCF_REG32(0xFC0451A0)
-+#define MCF_EDMA_TCD13_ATTR             MCF_REG16(0xFC0451A4)
-+#define MCF_EDMA_TCD13_SOFF             MCF_REG16(0xFC0451A6)
-+#define MCF_EDMA_TCD13_NBYTES           MCF_REG32(0xFC0451A8)
-+#define MCF_EDMA_TCD13_SLAST            MCF_REG32(0xFC0451AC)
-+#define MCF_EDMA_TCD13_DADDR            MCF_REG32(0xFC0451B0)
-+#define MCF_EDMA_TCD13_CITER_ELINK      MCF_REG16(0xFC0451B4)
-+#define MCF_EDMA_TCD13_CITER            MCF_REG16(0xFC0451B4)
-+#define MCF_EDMA_TCD13_DOFF             MCF_REG16(0xFC0451B6)
-+#define MCF_EDMA_TCD13_DLAST_SGA        MCF_REG32(0xFC0451B8)
-+#define MCF_EDMA_TCD13_BITER_ELINK      MCF_REG16(0xFC0451BC)
-+#define MCF_EDMA_TCD13_BITER            MCF_REG16(0xFC0451BC)
-+#define MCF_EDMA_TCD13_CSR              MCF_REG16(0xFC0451BE)
-+#define MCF_EDMA_TCD14_SADDR            MCF_REG32(0xFC0451C0)
-+#define MCF_EDMA_TCD14_ATTR             MCF_REG16(0xFC0451C4)
-+#define MCF_EDMA_TCD14_SOFF             MCF_REG16(0xFC0451C6)
-+#define MCF_EDMA_TCD14_NBYTES           MCF_REG32(0xFC0451C8)
-+#define MCF_EDMA_TCD14_SLAST            MCF_REG32(0xFC0451CC)
-+#define MCF_EDMA_TCD14_DADDR            MCF_REG32(0xFC0451D0)
-+#define MCF_EDMA_TCD14_CITER            MCF_REG16(0xFC0451D4)
-+#define MCF_EDMA_TCD14_CITER_ELINK      MCF_REG16(0xFC0451D4)
-+#define MCF_EDMA_TCD14_DOFF             MCF_REG16(0xFC0451D6)
-+#define MCF_EDMA_TCD14_DLAST_SGA        MCF_REG32(0xFC0451D8)
-+#define MCF_EDMA_TCD14_BITER_ELINK      MCF_REG16(0xFC0451DC)
-+#define MCF_EDMA_TCD14_BITER            MCF_REG16(0xFC0451DC)
-+#define MCF_EDMA_TCD14_CSR              MCF_REG16(0xFC0451DE)
-+#define MCF_EDMA_TCD15_SADDR            MCF_REG32(0xFC0451E0)
-+#define MCF_EDMA_TCD15_ATTR             MCF_REG16(0xFC0451E4)
-+#define MCF_EDMA_TCD15_SOFF             MCF_REG16(0xFC0451E6)
-+#define MCF_EDMA_TCD15_NBYTES           MCF_REG32(0xFC0451E8)
-+#define MCF_EDMA_TCD15_SLAST            MCF_REG32(0xFC0451EC)
-+#define MCF_EDMA_TCD15_DADDR            MCF_REG32(0xFC0451F0)
-+#define MCF_EDMA_TCD15_CITER_ELINK      MCF_REG16(0xFC0451F4)
-+#define MCF_EDMA_TCD15_CITER            MCF_REG16(0xFC0451F4)
-+#define MCF_EDMA_TCD15_DOFF             MCF_REG16(0xFC0451F6)
-+#define MCF_EDMA_TCD15_DLAST_SGA        MCF_REG32(0xFC0451F8)
-+#define MCF_EDMA_TCD15_BITER            MCF_REG16(0xFC0451FC)
-+#define MCF_EDMA_TCD15_BITER_ELINK      MCF_REG16(0xFC0451FC)
-+#define MCF_EDMA_TCD15_CSR              MCF_REG16(0xFC0451FE)
-+
-+/* Parameterized register read/write macros for multiple registers */
-+#define MCF_EDMA_DCHPRI(x)              MCF_REG08(0xFC044100+((x)*0x001))
-+#define MCF_EDMA_TCD_SADDR(x)           MCF_REG32(0xFC045000+((x)*0x020))
-+#define MCF_EDMA_TCD_ATTR(x)            MCF_REG16(0xFC045004+((x)*0x020))
-+#define MCF_EDMA_TCD_SOFF(x)            MCF_REG16(0xFC045006+((x)*0x020))
-+#define MCF_EDMA_TCD_NBYTES(x)          MCF_REG32(0xFC045008+((x)*0x020))
-+#define MCF_EDMA_TCD_SLAST(x)           MCF_REG32(0xFC04500C+((x)*0x020))
-+#define MCF_EDMA_TCD_DADDR(x)           MCF_REG32(0xFC045010+((x)*0x020))
-+#define MCF_EDMA_TCD_CITER_ELINK(x)     MCF_REG16(0xFC045014+((x)*0x020))
-+#define MCF_EDMA_TCD_CITER(x)           MCF_REG16(0xFC045014+((x)*0x020))
-+#define MCF_EDMA_TCD_DOFF(x)            MCF_REG16(0xFC045016+((x)*0x020))
-+#define MCF_EDMA_TCD_DLAST_SGA(x)       MCF_REG32(0xFC045018+((x)*0x020))
-+#define MCF_EDMA_TCD_BITER_ELINK(x)     MCF_REG16(0xFC04501C+((x)*0x020))
-+#define MCF_EDMA_TCD_BITER(x)           MCF_REG16(0xFC04501C+((x)*0x020))
-+#define MCF_EDMA_TCD_CSR(x)             MCF_REG16(0xFC04501e +((x)*0x020))
-+
-+/* Bit definitions and macros for CR */
-+#define MCF_EDMA_CR_EDBG        (0x00000002)
-+#define MCF_EDMA_CR_ERCA        (0x00000004)
-+
-+/* Bit definitions and macros for ES */
-+#define MCF_EDMA_ES_DBE         (0x00000001)
-+#define MCF_EDMA_ES_SBE         (0x00000002)
-+#define MCF_EDMA_ES_SGE         (0x00000004)
-+#define MCF_EDMA_ES_NCE         (0x00000008)
-+#define MCF_EDMA_ES_DOE         (0x00000010)
-+#define MCF_EDMA_ES_DAE         (0x00000020)
-+#define MCF_EDMA_ES_SOE         (0x00000040)
-+#define MCF_EDMA_ES_SAE         (0x00000080)
-+#define MCF_EDMA_ES_ERRCHN(x)   (((x)&0x0000000F)<<8)
-+#define MCF_EDMA_ES_CPE         (0x00004000)
-+#define MCF_EDMA_ES_VLD         (0x80000000)
-+
-+/* Bit definitions and macros for ERQ */
-+#define MCF_EDMA_ERQ_ERQ0       (0x0001)
-+#define MCF_EDMA_ERQ_ERQ1       (0x0002)
-+#define MCF_EDMA_ERQ_ERQ2       (0x0004)
-+#define MCF_EDMA_ERQ_ERQ3       (0x0008)
-+#define MCF_EDMA_ERQ_ERQ4       (0x0010)
-+#define MCF_EDMA_ERQ_ERQ5       (0x0020)
-+#define MCF_EDMA_ERQ_ERQ6       (0x0040)
-+#define MCF_EDMA_ERQ_ERQ7       (0x0080)
-+#define MCF_EDMA_ERQ_ERQ8       (0x0100)
-+#define MCF_EDMA_ERQ_ERQ9       (0x0200)
-+#define MCF_EDMA_ERQ_ERQ10      (0x0400)
-+#define MCF_EDMA_ERQ_ERQ11      (0x0800)
-+#define MCF_EDMA_ERQ_ERQ12      (0x1000)
-+#define MCF_EDMA_ERQ_ERQ13      (0x2000)
-+#define MCF_EDMA_ERQ_ERQ14      (0x4000)
-+#define MCF_EDMA_ERQ_ERQ15      (0x8000)
-+
-+/* Bit definitions and macros for EEI */
-+#define MCF_EDMA_EEI_EEI0       (0x0001)
-+#define MCF_EDMA_EEI_EEI1       (0x0002)
-+#define MCF_EDMA_EEI_EEI2       (0x0004)
-+#define MCF_EDMA_EEI_EEI3       (0x0008)
-+#define MCF_EDMA_EEI_EEI4       (0x0010)
-+#define MCF_EDMA_EEI_EEI5       (0x0020)
-+#define MCF_EDMA_EEI_EEI6       (0x0040)
-+#define MCF_EDMA_EEI_EEI7       (0x0080)
-+#define MCF_EDMA_EEI_EEI8       (0x0100)
-+#define MCF_EDMA_EEI_EEI9       (0x0200)
-+#define MCF_EDMA_EEI_EEI10      (0x0400)
-+#define MCF_EDMA_EEI_EEI11      (0x0800)
-+#define MCF_EDMA_EEI_EEI12      (0x1000)
-+#define MCF_EDMA_EEI_EEI13      (0x2000)
-+#define MCF_EDMA_EEI_EEI14      (0x4000)
-+#define MCF_EDMA_EEI_EEI15      (0x8000)
-+
-+/* Bit definitions and macros for SERQ */
-+#define MCF_EDMA_SERQ_SERQ(x)   (((x)&0x0F))
-+#define MCF_EDMA_SERQ_SAER      (0x40)
-+
-+/* Bit definitions and macros for CERQ */
-+#define MCF_EDMA_CERQ_CERQ(x)   (((x)&0x0F))
-+#define MCF_EDMA_CERQ_CAER      (0x40)
-+
-+/* Bit definitions and macros for SEEI */
-+#define MCF_EDMA_SEEI_SEEI(x)   (((x)&0x0F))
-+#define MCF_EDMA_SEEI_SAEE      (0x40)
-+
-+/* Bit definitions and macros for CEEI */
-+#define MCF_EDMA_CEEI_CEEI(x)   (((x)&0x0F))
-+#define MCF_EDMA_CEEI_CAEE      (0x40)
-+
-+/* Bit definitions and macros for CINT */
-+#define MCF_EDMA_CINT_CINT(x)   (((x)&0x0F))
-+#define MCF_EDMA_CINT_CAIR      (0x40)
-+
-+/* Bit definitions and macros for CERR */
-+#define MCF_EDMA_CERR_CERR(x)   (((x)&0x0F))
-+#define MCF_EDMA_CERR_CAER      (0x40)
-+
-+/* Bit definitions and macros for SSRT */
-+#define MCF_EDMA_SSRT_SSRT(x)   (((x)&0x0F))
-+#define MCF_EDMA_SSRT_SAST      (0x40)
-+
-+/* Bit definitions and macros for CDNE */
-+#define MCF_EDMA_CDNE_CDNE(x)   (((x)&0x0F))
-+#define MCF_EDMA_CDNE_CADN      (0x40)
-+
-+/* Bit definitions and macros for INTR */
-+#define MCF_EDMA_INTR_INT0      (0x0001)
-+#define MCF_EDMA_INTR_INT1      (0x0002)
-+#define MCF_EDMA_INTR_INT2      (0x0004)
-+#define MCF_EDMA_INTR_INT3      (0x0008)
-+#define MCF_EDMA_INTR_INT4      (0x0010)
-+#define MCF_EDMA_INTR_INT5      (0x0020)
-+#define MCF_EDMA_INTR_INT6      (0x0040)
-+#define MCF_EDMA_INTR_INT7      (0x0080)
-+#define MCF_EDMA_INTR_INT8      (0x0100)
-+#define MCF_EDMA_INTR_INT9      (0x0200)
-+#define MCF_EDMA_INTR_INT10     (0x0400)
-+#define MCF_EDMA_INTR_INT11     (0x0800)
-+#define MCF_EDMA_INTR_INT12     (0x1000)
-+#define MCF_EDMA_INTR_INT13     (0x2000)
-+#define MCF_EDMA_INTR_INT14     (0x4000)
-+#define MCF_EDMA_INTR_INT15     (0x8000)
-+
-+/* Bit definitions and macros for ERR */
-+#define MCF_EDMA_ERR_ERR0       (0x0001)
-+#define MCF_EDMA_ERR_ERR1       (0x0002)
-+#define MCF_EDMA_ERR_ERR2       (0x0004)
-+#define MCF_EDMA_ERR_ERR3       (0x0008)
-+#define MCF_EDMA_ERR_ERR4       (0x0010)
-+#define MCF_EDMA_ERR_ERR5       (0x0020)
-+#define MCF_EDMA_ERR_ERR6       (0x0040)
-+#define MCF_EDMA_ERR_ERR7       (0x0080)
-+#define MCF_EDMA_ERR_ERR8       (0x0100)
-+#define MCF_EDMA_ERR_ERR9       (0x0200)
-+#define MCF_EDMA_ERR_ERR10      (0x0400)
-+#define MCF_EDMA_ERR_ERR11      (0x0800)
-+#define MCF_EDMA_ERR_ERR12      (0x1000)
-+#define MCF_EDMA_ERR_ERR13      (0x2000)
-+#define MCF_EDMA_ERR_ERR14      (0x4000)
-+#define MCF_EDMA_ERR_ERR15      (0x8000)
-+
-+/* Bit definitions and macros for DCHPRI group */
-+#define MCF_EDMA_DCHPRI_CHPRI(x)    (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI_ECP         (0x80)
-+
-+/* Bit definitions and macros for DCHPRI0 */
-+#define MCF_EDMA_DCHPRI0_CHPRI(x)   (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI0_ECP        (0x80)
-+
-+/* Bit definitions and macros for DCHPRI1 */
-+#define MCF_EDMA_DCHPRI1_CHPRI(x)   (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI1_ECP        (0x80)
-+
-+/* Bit definitions and macros for DCHPRI2 */
-+#define MCF_EDMA_DCHPRI2_CHPRI(x)   (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI2_ECP        (0x80)
-+
-+/* Bit definitions and macros for DCHPRI3 */
-+#define MCF_EDMA_DCHPRI3_CHPRI(x)   (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI3_ECP        (0x80)
-+
-+/* Bit definitions and macros for DCHPRI4 */
-+#define MCF_EDMA_DCHPRI4_CHPRI(x)   (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI4_ECP        (0x80)
-+
-+/* Bit definitions and macros for DCHPRI5 */
-+#define MCF_EDMA_DCHPRI5_CHPRI(x)   (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI5_ECP        (0x80)
-+
-+/* Bit definitions and macros for DCHPRI6 */
-+#define MCF_EDMA_DCHPRI6_CHPRI(x)   (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI6_ECP        (0x80)
-+
-+/* Bit definitions and macros for DCHPRI7 */
-+#define MCF_EDMA_DCHPRI7_CHPRI(x)   (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI7_ECP        (0x80)
-+
-+/* Bit definitions and macros for DCHPRI8 */
-+#define MCF_EDMA_DCHPRI8_CHPRI(x)   (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI8_ECP        (0x80)
-+
-+/* Bit definitions and macros for DCHPRI9 */
-+#define MCF_EDMA_DCHPRI9_CHPRI(x)   (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI9_ECP        (0x80)
-+
-+/* Bit definitions and macros for DCHPRI10 */
-+#define MCF_EDMA_DCHPRI10_CHPRI(x)      (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI10_ECP           (0x80)
-+
-+/* Bit definitions and macros for DCHPRI11 */
-+#define MCF_EDMA_DCHPRI11_CHPRI(x)      (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI11_ECP           (0x80)
-+
-+/* Bit definitions and macros for DCHPRI12 */
-+#define MCF_EDMA_DCHPRI12_CHPRI(x)      (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI12_ECP           (0x80)
-+
-+/* Bit definitions and macros for DCHPRI13 */
-+#define MCF_EDMA_DCHPRI13_CHPRI(x)      (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI13_ECP           (0x80)
-+
-+/* Bit definitions and macros for DCHPRI14 */
-+#define MCF_EDMA_DCHPRI14_CHPRI(x)      (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI14_ECP           (0x80)
-+
-+/* Bit definitions and macros for DCHPRI15 */
-+#define MCF_EDMA_DCHPRI15_CHPRI(x)      (((x)&0x0F))
-+#define MCF_EDMA_DCHPRI15_ECP           (0x80)
-+
-+/* Bit definitions and macros for TCD_SADDR group */
-+#define MCF_EDMA_TCD_SADDR_SADDR(x)     (x)
-+
-+/* Bit definitions and macros for TCD0_SADDR */
-+#define MCF_EDMA_TCD0_SADDR_SADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD_ATTR group */
-+#define MCF_EDMA_TCD_ATTR_DSIZE(x)          (((x)&0x0007))
-+#define MCF_EDMA_TCD_ATTR_DMOD(x)           (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD_ATTR_SSIZE(x)          (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD_ATTR_SMOD(x)           (((x)&0x001F)<<11)
-+#define MCF_EDMA_TCD_ATTR_SSIZE_8BIT        (0x0000)
-+#define MCF_EDMA_TCD_ATTR_SSIZE_16BIT       (0x0100)
-+#define MCF_EDMA_TCD_ATTR_SSIZE_32BIT       (0x0200)
-+#define MCF_EDMA_TCD_ATTR_SSIZE_16BYTE      (0x0400)
-+#define MCF_EDMA_TCD_ATTR_DSIZE_8BIT        (0x0000)
-+#define MCF_EDMA_TCD_ATTR_DSIZE_16BIT       (0x0001)
-+#define MCF_EDMA_TCD_ATTR_DSIZE_32BIT       (0x0002)
-+#define MCF_EDMA_TCD_ATTR_DSIZE_16BYTE      (0x0004)
-+
-+/* Bit definitions and macros for TCD0_ATTR */
-+#define MCF_EDMA_TCD0_ATTR_DSIZE(x)         (((x)&0x0007))
-+#define MCF_EDMA_TCD0_ATTR_DMOD(x)          (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD0_ATTR_SSIZE(x)         (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD0_ATTR_SMOD(x)          (((x)&0x001F)<<11)
-+#define MCF_EDMA_TCD0_ATTR_SSIZE_8BIT       (0x0000)
-+#define MCF_EDMA_TCD0_ATTR_SSIZE_16BIT      (0x0100)
-+#define MCF_EDMA_TCD0_ATTR_SSIZE_32BIT      (0x0200)
-+#define MCF_EDMA_TCD0_ATTR_SSIZE_16BYTE     (0x0400)
-+#define MCF_EDMA_TCD0_ATTR_DSIZE_8BIT       (0x0000)
-+#define MCF_EDMA_TCD0_ATTR_DSIZE_16BIT      (0x0001)
-+#define MCF_EDMA_TCD0_ATTR_DSIZE_32BIT      (0x0002)
-+#define MCF_EDMA_TCD0_ATTR_DSIZE_16BYTE     (0x0004)
-+
-+/* Bit definitions and macros for TCD_SOFF group */
-+#define MCF_EDMA_TCD_SOFF_SOFF(x)   (x)
-+
-+/* Bit definitions and macros for TCD0_SOFF */
-+#define MCF_EDMA_TCD0_SOFF_SOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD_NBYTES group */
-+#define MCF_EDMA_TCD_NBYTES_NBYTES(x)   (x)
-+
-+/* Bit definitions and macros for TCD0_NBYTES */
-+#define MCF_EDMA_TCD0_NBYTES_NBYTES(x)      (x)
-+
-+/* Bit definitions and macros for TCD_SLAST group */
-+#define MCF_EDMA_TCD_SLAST_SLAST(x)     (x)
-+
-+/* Bit definitions and macros for TCD0_SLAST */
-+#define MCF_EDMA_TCD0_SLAST_SLAST(x)    (x)
-+
-+/* Bit definitions and macros for TCD_DADDR group */
-+#define MCF_EDMA_TCD_DADDR_DADDR(x)     (x)
-+
-+/* Bit definitions and macros for TCD0_DADDR */
-+#define MCF_EDMA_TCD0_DADDR_DADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD_CITER_ELINK group */
-+#define MCF_EDMA_TCD_CITER_ELINK_CITER(x)       (((x)&0x01FF))
-+#define MCF_EDMA_TCD_CITER_ELINK_LINKCH(x)      (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD_CITER_ELINK_E_LINK         (0x8000)
-+
-+/* Bit definitions and macros for TCD0_CITER_ELINK */
-+#define MCF_EDMA_TCD0_CITER_ELINK_CITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD0_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD0_CITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD_CITER group */
-+#define MCF_EDMA_TCD_CITER_CITER(x)     (((x)&0x7FFF))
-+#define MCF_EDMA_TCD_CITER_E_LINK       (0x8000)
-+
-+/* Bit definitions and macros for TCD0_CITER */
-+#define MCF_EDMA_TCD0_CITER_CITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD0_CITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD_DOFF group */
-+#define MCF_EDMA_TCD_DOFF_DOFF(x)   (x)
-+
-+/* Bit definitions and macros for TCD0_DOFF */
-+#define MCF_EDMA_TCD0_DOFF_DOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD_DLAST_SGA group */
-+#define MCF_EDMA_TCD_DLAST_SGA_DLAST_SGA(x)     (x)
-+
-+/* Bit definitions and macros for TCD0_DLAST_SGA */
-+#define MCF_EDMA_TCD0_DLAST_SGA_DLAST_SGA(x)    (x)
-+
-+/* Bit definitions and macros for TCD_BITER_ELINK group */
-+#define MCF_EDMA_TCD_BITER_ELINK_BITER(x)       (((x)&0x01FF))
-+#define MCF_EDMA_TCD_BITER_ELINK_LINKCH(x)      (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD_BITER_ELINK_E_LINK         (0x8000)
-+
-+/* Bit definitions and macros for TCD0_BITER_ELINK */
-+#define MCF_EDMA_TCD0_BITER_ELINK_BITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD0_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD0_BITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD_BITER group */
-+#define MCF_EDMA_TCD_BITER_BITER(x)     (((x)&0x7FFF))
-+#define MCF_EDMA_TCD_BITER_E_LINK       (0x8000)
-+
-+/* Bit definitions and macros for TCD0_BITER */
-+#define MCF_EDMA_TCD0_BITER_BITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD0_BITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD_CSR group */
-+#define MCF_EDMA_TCD_CSR_START              (0x0001)
-+#define MCF_EDMA_TCD_CSR_INT_MAJOR          (0x0002)
-+#define MCF_EDMA_TCD_CSR_INT_HALF           (0x0004)
-+#define MCF_EDMA_TCD_CSR_D_REQ              (0x0008)
-+#define MCF_EDMA_TCD_CSR_E_SG               (0x0010)
-+#define MCF_EDMA_TCD_CSR_E_LINK             (0x0020)
-+#define MCF_EDMA_TCD_CSR_ACTIVE             (0x0040)
-+#define MCF_EDMA_TCD_CSR_DONE               (0x0080)
-+#define MCF_EDMA_TCD_CSR_LINKCH(x)          (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD_CSR_BWC(x)             (((x)&0x0003)<<14)
-+#define MCF_EDMA_TCD_CSR_BWC_NO_STALL       (0x0000)
-+#define MCF_EDMA_TCD_CSR_BWC_4CYC_STALL     (0x8000)
-+#define MCF_EDMA_TCD_CSR_BWC_8CYC_STALL     (0xC000)
-+
-+/* Bit definitions and macros for TCD0_CSR */
-+#define MCF_EDMA_TCD0_CSR_START             (0x0001)
-+#define MCF_EDMA_TCD0_CSR_INT_MAJOR         (0x0002)
-+#define MCF_EDMA_TCD0_CSR_INT_HALF          (0x0004)
-+#define MCF_EDMA_TCD0_CSR_D_REQ             (0x0008)
-+#define MCF_EDMA_TCD0_CSR_E_SG              (0x0010)
-+#define MCF_EDMA_TCD0_CSR_E_LINK            (0x0020)
-+#define MCF_EDMA_TCD0_CSR_ACTIVE            (0x0040)
-+#define MCF_EDMA_TCD0_CSR_DONE              (0x0080)
-+#define MCF_EDMA_TCD0_CSR_LINKCH(x)         (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD0_CSR_BWC(x)            (((x)&0x0003)<<14)
-+#define MCF_EDMA_TCD0_CSR_BWC_NO_STALL      (0x0000)
-+#define MCF_EDMA_TCD0_CSR_BWC_4CYC_STALL    (0x8000)
-+#define MCF_EDMA_TCD0_CSR_BWC_8CYC_STALL    (0xC000)
-+
-+/* Bit definitions and macros for TCD1_SADDR */
-+#define MCF_EDMA_TCD1_SADDR_SADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD1_ATTR */
-+#define MCF_EDMA_TCD1_ATTR_DSIZE(x)     (((x)&0x0007))
-+#define MCF_EDMA_TCD1_ATTR_DMOD(x)      (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD1_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD1_ATTR_SMOD(x)      (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD1_SOFF */
-+#define MCF_EDMA_TCD1_SOFF_SOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD1_NBYTES */
-+#define MCF_EDMA_TCD1_NBYTES_NBYTES(x)      (x)
-+
-+/* Bit definitions and macros for TCD1_SLAST */
-+#define MCF_EDMA_TCD1_SLAST_SLAST(x)    (x)
-+
-+/* Bit definitions and macros for TCD1_DADDR */
-+#define MCF_EDMA_TCD1_DADDR_DADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD1_CITER_ELINK */
-+#define MCF_EDMA_TCD1_CITER_ELINK_CITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD1_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD1_CITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD1_CITER */
-+#define MCF_EDMA_TCD1_CITER_CITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD1_CITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD1_DOFF */
-+#define MCF_EDMA_TCD1_DOFF_DOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD1_DLAST_SGA */
-+#define MCF_EDMA_TCD1_DLAST_SGA_DLAST_SGA(x)    (x)
-+
-+/* Bit definitions and macros for TCD1_BITER */
-+#define MCF_EDMA_TCD1_BITER_BITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD1_BITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD1_BITER_ELINK */
-+#define MCF_EDMA_TCD1_BITER_ELINK_BITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD1_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD1_BITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD1_CSR */
-+#define MCF_EDMA_TCD1_CSR_START         (0x0001)
-+#define MCF_EDMA_TCD1_CSR_INT_MAJOR     (0x0002)
-+#define MCF_EDMA_TCD1_CSR_INT_HALF      (0x0004)
-+#define MCF_EDMA_TCD1_CSR_D_REQ         (0x0008)
-+#define MCF_EDMA_TCD1_CSR_E_SG          (0x0010)
-+#define MCF_EDMA_TCD1_CSR_E_LINK        (0x0020)
-+#define MCF_EDMA_TCD1_CSR_ACTIVE        (0x0040)
-+#define MCF_EDMA_TCD1_CSR_DONE          (0x0080)
-+#define MCF_EDMA_TCD1_CSR_LINKCH(x)     (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD1_CSR_BWC(x)        (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD2_SADDR */
-+#define MCF_EDMA_TCD2_SADDR_SADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD2_ATTR */
-+#define MCF_EDMA_TCD2_ATTR_DSIZE(x)     (((x)&0x0007))
-+#define MCF_EDMA_TCD2_ATTR_DMOD(x)      (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD2_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD2_ATTR_SMOD(x)      (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD2_SOFF */
-+#define MCF_EDMA_TCD2_SOFF_SOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD2_NBYTES */
-+#define MCF_EDMA_TCD2_NBYTES_NBYTES(x)      (x)
-+
-+/* Bit definitions and macros for TCD2_SLAST */
-+#define MCF_EDMA_TCD2_SLAST_SLAST(x)    (x)
-+
-+/* Bit definitions and macros for TCD2_DADDR */
-+#define MCF_EDMA_TCD2_DADDR_DADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD2_CITER */
-+#define MCF_EDMA_TCD2_CITER_CITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD2_CITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD2_CITER_ELINK */
-+#define MCF_EDMA_TCD2_CITER_ELINK_CITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD2_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD2_CITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD2_DOFF */
-+#define MCF_EDMA_TCD2_DOFF_DOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD2_DLAST_SGA */
-+#define MCF_EDMA_TCD2_DLAST_SGA_DLAST_SGA(x)    (x)
-+
-+/* Bit definitions and macros for TCD2_BITER_ELINK */
-+#define MCF_EDMA_TCD2_BITER_ELINK_BITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD2_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD2_BITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD2_BITER */
-+#define MCF_EDMA_TCD2_BITER_BITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD2_BITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD2_CSR */
-+#define MCF_EDMA_TCD2_CSR_START         (0x0001)
-+#define MCF_EDMA_TCD2_CSR_INT_MAJOR     (0x0002)
-+#define MCF_EDMA_TCD2_CSR_INT_HALF      (0x0004)
-+#define MCF_EDMA_TCD2_CSR_D_REQ         (0x0008)
-+#define MCF_EDMA_TCD2_CSR_E_SG          (0x0010)
-+#define MCF_EDMA_TCD2_CSR_E_LINK        (0x0020)
-+#define MCF_EDMA_TCD2_CSR_ACTIVE        (0x0040)
-+#define MCF_EDMA_TCD2_CSR_DONE          (0x0080)
-+#define MCF_EDMA_TCD2_CSR_LINKCH(x)     (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD2_CSR_BWC(x)        (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD3_SADDR */
-+#define MCF_EDMA_TCD3_SADDR_SADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD3_ATTR */
-+#define MCF_EDMA_TCD3_ATTR_DSIZE(x)     (((x)&0x0007))
-+#define MCF_EDMA_TCD3_ATTR_DMOD(x)      (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD3_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD3_ATTR_SMOD(x)      (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD3_SOFF */
-+#define MCF_EDMA_TCD3_SOFF_SOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD3_NBYTES */
-+#define MCF_EDMA_TCD3_NBYTES_NBYTES(x)      (x)
-+
-+/* Bit definitions and macros for TCD3_SLAST */
-+#define MCF_EDMA_TCD3_SLAST_SLAST(x)    (x)
-+
-+/* Bit definitions and macros for TCD3_DADDR */
-+#define MCF_EDMA_TCD3_DADDR_DADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD3_CITER */
-+#define MCF_EDMA_TCD3_CITER_CITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD3_CITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD3_CITER_ELINK */
-+#define MCF_EDMA_TCD3_CITER_ELINK_CITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD3_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD3_CITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD3_DOFF */
-+#define MCF_EDMA_TCD3_DOFF_DOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD3_DLAST_SGA */
-+#define MCF_EDMA_TCD3_DLAST_SGA_DLAST_SGA(x)    (x)
-+
-+/* Bit definitions and macros for TCD3_BITER_ELINK */
-+#define MCF_EDMA_TCD3_BITER_ELINK_BITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD3_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD3_BITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD3_BITER */
-+#define MCF_EDMA_TCD3_BITER_BITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD3_BITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD3_CSR */
-+#define MCF_EDMA_TCD3_CSR_START         (0x0001)
-+#define MCF_EDMA_TCD3_CSR_INT_MAJOR     (0x0002)
-+#define MCF_EDMA_TCD3_CSR_INT_HALF      (0x0004)
-+#define MCF_EDMA_TCD3_CSR_D_REQ         (0x0008)
-+#define MCF_EDMA_TCD3_CSR_E_SG          (0x0010)
-+#define MCF_EDMA_TCD3_CSR_E_LINK        (0x0020)
-+#define MCF_EDMA_TCD3_CSR_ACTIVE        (0x0040)
-+#define MCF_EDMA_TCD3_CSR_DONE          (0x0080)
-+#define MCF_EDMA_TCD3_CSR_LINKCH(x)     (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD3_CSR_BWC(x)        (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD4_SADDR */
-+#define MCF_EDMA_TCD4_SADDR_SADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD4_ATTR */
-+#define MCF_EDMA_TCD4_ATTR_DSIZE(x)     (((x)&0x0007))
-+#define MCF_EDMA_TCD4_ATTR_DMOD(x)      (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD4_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD4_ATTR_SMOD(x)      (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD4_SOFF */
-+#define MCF_EDMA_TCD4_SOFF_SOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD4_NBYTES */
-+#define MCF_EDMA_TCD4_NBYTES_NBYTES(x)      (x)
-+
-+/* Bit definitions and macros for TCD4_SLAST */
-+#define MCF_EDMA_TCD4_SLAST_SLAST(x)    (x)
-+
-+/* Bit definitions and macros for TCD4_DADDR */
-+#define MCF_EDMA_TCD4_DADDR_DADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD4_CITER */
-+#define MCF_EDMA_TCD4_CITER_CITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD4_CITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD4_CITER_ELINK */
-+#define MCF_EDMA_TCD4_CITER_ELINK_CITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD4_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD4_CITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD4_DOFF */
-+#define MCF_EDMA_TCD4_DOFF_DOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD4_DLAST_SGA */
-+#define MCF_EDMA_TCD4_DLAST_SGA_DLAST_SGA(x)    (x)
-+
-+/* Bit definitions and macros for TCD4_BITER */
-+#define MCF_EDMA_TCD4_BITER_BITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD4_BITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD4_BITER_ELINK */
-+#define MCF_EDMA_TCD4_BITER_ELINK_BITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD4_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD4_BITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD4_CSR */
-+#define MCF_EDMA_TCD4_CSR_START         (0x0001)
-+#define MCF_EDMA_TCD4_CSR_INT_MAJOR     (0x0002)
-+#define MCF_EDMA_TCD4_CSR_INT_HALF      (0x0004)
-+#define MCF_EDMA_TCD4_CSR_D_REQ         (0x0008)
-+#define MCF_EDMA_TCD4_CSR_E_SG          (0x0010)
-+#define MCF_EDMA_TCD4_CSR_E_LINK        (0x0020)
-+#define MCF_EDMA_TCD4_CSR_ACTIVE        (0x0040)
-+#define MCF_EDMA_TCD4_CSR_DONE          (0x0080)
-+#define MCF_EDMA_TCD4_CSR_LINKCH(x)     (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD4_CSR_BWC(x)        (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD5_SADDR */
-+#define MCF_EDMA_TCD5_SADDR_SADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD5_ATTR */
-+#define MCF_EDMA_TCD5_ATTR_DSIZE(x)     (((x)&0x0007))
-+#define MCF_EDMA_TCD5_ATTR_DMOD(x)      (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD5_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD5_ATTR_SMOD(x)      (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD5_SOFF */
-+#define MCF_EDMA_TCD5_SOFF_SOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD5_NBYTES */
-+#define MCF_EDMA_TCD5_NBYTES_NBYTES(x)      (x)
-+
-+/* Bit definitions and macros for TCD5_SLAST */
-+#define MCF_EDMA_TCD5_SLAST_SLAST(x)    (x)
-+
-+/* Bit definitions and macros for TCD5_DADDR */
-+#define MCF_EDMA_TCD5_DADDR_DADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD5_CITER */
-+#define MCF_EDMA_TCD5_CITER_CITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD5_CITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD5_CITER_ELINK */
-+#define MCF_EDMA_TCD5_CITER_ELINK_CITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD5_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD5_CITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD5_DOFF */
-+#define MCF_EDMA_TCD5_DOFF_DOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD5_DLAST_SGA */
-+#define MCF_EDMA_TCD5_DLAST_SGA_DLAST_SGA(x)    (x)
-+
-+/* Bit definitions and macros for TCD5_BITER_ELINK */
-+#define MCF_EDMA_TCD5_BITER_ELINK_BITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD5_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD5_BITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD5_BITER */
-+#define MCF_EDMA_TCD5_BITER_BITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD5_BITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD5_CSR */
-+#define MCF_EDMA_TCD5_CSR_START         (0x0001)
-+#define MCF_EDMA_TCD5_CSR_INT_MAJOR     (0x0002)
-+#define MCF_EDMA_TCD5_CSR_INT_HALF      (0x0004)
-+#define MCF_EDMA_TCD5_CSR_D_REQ         (0x0008)
-+#define MCF_EDMA_TCD5_CSR_E_SG          (0x0010)
-+#define MCF_EDMA_TCD5_CSR_E_LINK        (0x0020)
-+#define MCF_EDMA_TCD5_CSR_ACTIVE        (0x0040)
-+#define MCF_EDMA_TCD5_CSR_DONE          (0x0080)
-+#define MCF_EDMA_TCD5_CSR_LINKCH(x)     (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD5_CSR_BWC(x)        (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD6_SADDR */
-+#define MCF_EDMA_TCD6_SADDR_SADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD6_ATTR */
-+#define MCF_EDMA_TCD6_ATTR_DSIZE(x)     (((x)&0x0007))
-+#define MCF_EDMA_TCD6_ATTR_DMOD(x)      (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD6_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD6_ATTR_SMOD(x)      (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD6_SOFF */
-+#define MCF_EDMA_TCD6_SOFF_SOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD6_NBYTES */
-+#define MCF_EDMA_TCD6_NBYTES_NBYTES(x)      (x)
-+
-+/* Bit definitions and macros for TCD6_SLAST */
-+#define MCF_EDMA_TCD6_SLAST_SLAST(x)    (x)
-+
-+/* Bit definitions and macros for TCD6_DADDR */
-+#define MCF_EDMA_TCD6_DADDR_DADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD6_CITER */
-+#define MCF_EDMA_TCD6_CITER_CITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD6_CITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD6_CITER_ELINK */
-+#define MCF_EDMA_TCD6_CITER_ELINK_CITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD6_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD6_CITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD6_DOFF */
-+#define MCF_EDMA_TCD6_DOFF_DOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD6_DLAST_SGA */
-+#define MCF_EDMA_TCD6_DLAST_SGA_DLAST_SGA(x)    (x)
-+
-+/* Bit definitions and macros for TCD6_BITER_ELINK */
-+#define MCF_EDMA_TCD6_BITER_ELINK_BITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD6_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD6_BITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD6_BITER */
-+#define MCF_EDMA_TCD6_BITER_BITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD6_BITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD6_CSR */
-+#define MCF_EDMA_TCD6_CSR_START         (0x0001)
-+#define MCF_EDMA_TCD6_CSR_INT_MAJOR     (0x0002)
-+#define MCF_EDMA_TCD6_CSR_INT_HALF      (0x0004)
-+#define MCF_EDMA_TCD6_CSR_D_REQ         (0x0008)
-+#define MCF_EDMA_TCD6_CSR_E_SG          (0x0010)
-+#define MCF_EDMA_TCD6_CSR_E_LINK        (0x0020)
-+#define MCF_EDMA_TCD6_CSR_ACTIVE        (0x0040)
-+#define MCF_EDMA_TCD6_CSR_DONE          (0x0080)
-+#define MCF_EDMA_TCD6_CSR_LINKCH(x)     (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD6_CSR_BWC(x)        (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD7_SADDR */
-+#define MCF_EDMA_TCD7_SADDR_SADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD7_ATTR */
-+#define MCF_EDMA_TCD7_ATTR_DSIZE(x)     (((x)&0x0007))
-+#define MCF_EDMA_TCD7_ATTR_DMOD(x)      (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD7_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD7_ATTR_SMOD(x)      (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD7_SOFF */
-+#define MCF_EDMA_TCD7_SOFF_SOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD7_NBYTES */
-+#define MCF_EDMA_TCD7_NBYTES_NBYTES(x)      (x)
-+
-+/* Bit definitions and macros for TCD7_SLAST */
-+#define MCF_EDMA_TCD7_SLAST_SLAST(x)    (x)
-+
-+/* Bit definitions and macros for TCD7_DADDR */
-+#define MCF_EDMA_TCD7_DADDR_DADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD7_CITER */
-+#define MCF_EDMA_TCD7_CITER_CITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD7_CITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD7_CITER_ELINK */
-+#define MCF_EDMA_TCD7_CITER_ELINK_CITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD7_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD7_CITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD7_DOFF */
-+#define MCF_EDMA_TCD7_DOFF_DOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD7_DLAST_SGA */
-+#define MCF_EDMA_TCD7_DLAST_SGA_DLAST_SGA(x)    (x)
-+
-+/* Bit definitions and macros for TCD7_BITER_ELINK */
-+#define MCF_EDMA_TCD7_BITER_ELINK_BITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD7_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD7_BITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD7_BITER */
-+#define MCF_EDMA_TCD7_BITER_BITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD7_BITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD7_CSR */
-+#define MCF_EDMA_TCD7_CSR_START         (0x0001)
-+#define MCF_EDMA_TCD7_CSR_INT_MAJOR     (0x0002)
-+#define MCF_EDMA_TCD7_CSR_INT_HALF      (0x0004)
-+#define MCF_EDMA_TCD7_CSR_D_REQ         (0x0008)
-+#define MCF_EDMA_TCD7_CSR_E_SG          (0x0010)
-+#define MCF_EDMA_TCD7_CSR_E_LINK        (0x0020)
-+#define MCF_EDMA_TCD7_CSR_ACTIVE        (0x0040)
-+#define MCF_EDMA_TCD7_CSR_DONE          (0x0080)
-+#define MCF_EDMA_TCD7_CSR_LINKCH(x)     (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD7_CSR_BWC(x)        (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD8_SADDR */
-+#define MCF_EDMA_TCD8_SADDR_SADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD8_ATTR */
-+#define MCF_EDMA_TCD8_ATTR_DSIZE(x)     (((x)&0x0007))
-+#define MCF_EDMA_TCD8_ATTR_DMOD(x)      (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD8_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD8_ATTR_SMOD(x)      (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD8_SOFF */
-+#define MCF_EDMA_TCD8_SOFF_SOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD8_NBYTES */
-+#define MCF_EDMA_TCD8_NBYTES_NBYTES(x)      (x)
-+
-+/* Bit definitions and macros for TCD8_SLAST */
-+#define MCF_EDMA_TCD8_SLAST_SLAST(x)    (x)
-+
-+/* Bit definitions and macros for TCD8_DADDR */
-+#define MCF_EDMA_TCD8_DADDR_DADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD8_CITER */
-+#define MCF_EDMA_TCD8_CITER_CITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD8_CITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD8_CITER_ELINK */
-+#define MCF_EDMA_TCD8_CITER_ELINK_CITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD8_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD8_CITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD8_DOFF */
-+#define MCF_EDMA_TCD8_DOFF_DOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD8_DLAST_SGA */
-+#define MCF_EDMA_TCD8_DLAST_SGA_DLAST_SGA(x)    (x)
-+
-+/* Bit definitions and macros for TCD8_BITER_ELINK */
-+#define MCF_EDMA_TCD8_BITER_ELINK_BITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD8_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD8_BITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD8_BITER */
-+#define MCF_EDMA_TCD8_BITER_BITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD8_BITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD8_CSR */
-+#define MCF_EDMA_TCD8_CSR_START         (0x0001)
-+#define MCF_EDMA_TCD8_CSR_INT_MAJOR     (0x0002)
-+#define MCF_EDMA_TCD8_CSR_INT_HALF      (0x0004)
-+#define MCF_EDMA_TCD8_CSR_D_REQ         (0x0008)
-+#define MCF_EDMA_TCD8_CSR_E_SG          (0x0010)
-+#define MCF_EDMA_TCD8_CSR_E_LINK        (0x0020)
-+#define MCF_EDMA_TCD8_CSR_ACTIVE        (0x0040)
-+#define MCF_EDMA_TCD8_CSR_DONE          (0x0080)
-+#define MCF_EDMA_TCD8_CSR_LINKCH(x)     (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD8_CSR_BWC(x)        (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD9_SADDR */
-+#define MCF_EDMA_TCD9_SADDR_SADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD9_ATTR */
-+#define MCF_EDMA_TCD9_ATTR_DSIZE(x)     (((x)&0x0007))
-+#define MCF_EDMA_TCD9_ATTR_DMOD(x)      (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD9_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD9_ATTR_SMOD(x)      (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD9_SOFF */
-+#define MCF_EDMA_TCD9_SOFF_SOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD9_NBYTES */
-+#define MCF_EDMA_TCD9_NBYTES_NBYTES(x)      (x)
-+
-+/* Bit definitions and macros for TCD9_SLAST */
-+#define MCF_EDMA_TCD9_SLAST_SLAST(x)    (x)
-+
-+/* Bit definitions and macros for TCD9_DADDR */
-+#define MCF_EDMA_TCD9_DADDR_DADDR(x)    (x)
-+
-+/* Bit definitions and macros for TCD9_CITER_ELINK */
-+#define MCF_EDMA_TCD9_CITER_ELINK_CITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD9_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD9_CITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD9_CITER */
-+#define MCF_EDMA_TCD9_CITER_CITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD9_CITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD9_DOFF */
-+#define MCF_EDMA_TCD9_DOFF_DOFF(x)      (x)
-+
-+/* Bit definitions and macros for TCD9_DLAST_SGA */
-+#define MCF_EDMA_TCD9_DLAST_SGA_DLAST_SGA(x)    (x)
-+
-+/* Bit definitions and macros for TCD9_BITER_ELINK */
-+#define MCF_EDMA_TCD9_BITER_ELINK_BITER(x)      (((x)&0x01FF))
-+#define MCF_EDMA_TCD9_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD9_BITER_ELINK_E_LINK        (0x8000)
-+
-+/* Bit definitions and macros for TCD9_BITER */
-+#define MCF_EDMA_TCD9_BITER_BITER(x)    (((x)&0x7FFF))
-+#define MCF_EDMA_TCD9_BITER_E_LINK      (0x8000)
-+
-+/* Bit definitions and macros for TCD9_CSR */
-+#define MCF_EDMA_TCD9_CSR_START         (0x0001)
-+#define MCF_EDMA_TCD9_CSR_INT_MAJOR     (0x0002)
-+#define MCF_EDMA_TCD9_CSR_INT_HALF      (0x0004)
-+#define MCF_EDMA_TCD9_CSR_D_REQ         (0x0008)
-+#define MCF_EDMA_TCD9_CSR_E_SG          (0x0010)
-+#define MCF_EDMA_TCD9_CSR_E_LINK        (0x0020)
-+#define MCF_EDMA_TCD9_CSR_ACTIVE        (0x0040)
-+#define MCF_EDMA_TCD9_CSR_DONE          (0x0080)
-+#define MCF_EDMA_TCD9_CSR_LINKCH(x)     (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD9_CSR_BWC(x)        (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD10_SADDR */
-+#define MCF_EDMA_TCD10_SADDR_SADDR(x)   (x)
-+
-+/* Bit definitions and macros for TCD10_ATTR */
-+#define MCF_EDMA_TCD10_ATTR_DSIZE(x)    (((x)&0x0007))
-+#define MCF_EDMA_TCD10_ATTR_DMOD(x)     (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD10_ATTR_SSIZE(x)    (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD10_ATTR_SMOD(x)     (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD10_SOFF */
-+#define MCF_EDMA_TCD10_SOFF_SOFF(x)     (x)
-+
-+/* Bit definitions and macros for TCD10_NBYTES */
-+#define MCF_EDMA_TCD10_NBYTES_NBYTES(x)     (x)
-+
-+/* Bit definitions and macros for TCD10_SLAST */
-+#define MCF_EDMA_TCD10_SLAST_SLAST(x)   (x)
-+
-+/* Bit definitions and macros for TCD10_DADDR */
-+#define MCF_EDMA_TCD10_DADDR_DADDR(x)   (x)
-+
-+/* Bit definitions and macros for TCD10_CITER_ELINK */
-+#define MCF_EDMA_TCD10_CITER_ELINK_CITER(x)     (((x)&0x01FF))
-+#define MCF_EDMA_TCD10_CITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD10_CITER_ELINK_E_LINK       (0x8000)
-+
-+/* Bit definitions and macros for TCD10_CITER */
-+#define MCF_EDMA_TCD10_CITER_CITER(x)   (((x)&0x7FFF))
-+#define MCF_EDMA_TCD10_CITER_E_LINK     (0x8000)
-+
-+/* Bit definitions and macros for TCD10_DOFF */
-+#define MCF_EDMA_TCD10_DOFF_DOFF(x)     (x)
-+
-+/* Bit definitions and macros for TCD10_DLAST_SGA */
-+#define MCF_EDMA_TCD10_DLAST_SGA_DLAST_SGA(x)   (x)
-+
-+/* Bit definitions and macros for TCD10_BITER */
-+#define MCF_EDMA_TCD10_BITER_BITER(x)   (((x)&0x7FFF))
-+#define MCF_EDMA_TCD10_BITER_E_LINK     (0x8000)
-+
-+/* Bit definitions and macros for TCD10_BITER_ELINK */
-+#define MCF_EDMA_TCD10_BITER_ELINK_BITER(x)     (((x)&0x01FF))
-+#define MCF_EDMA_TCD10_BITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD10_BITER_ELINK_E_LINK       (0x8000)
-+
-+/* Bit definitions and macros for TCD10_CSR */
-+#define MCF_EDMA_TCD10_CSR_START        (0x0001)
-+#define MCF_EDMA_TCD10_CSR_INT_MAJOR    (0x0002)
-+#define MCF_EDMA_TCD10_CSR_INT_HALF     (0x0004)
-+#define MCF_EDMA_TCD10_CSR_D_REQ        (0x0008)
-+#define MCF_EDMA_TCD10_CSR_E_SG         (0x0010)
-+#define MCF_EDMA_TCD10_CSR_E_LINK       (0x0020)
-+#define MCF_EDMA_TCD10_CSR_ACTIVE       (0x0040)
-+#define MCF_EDMA_TCD10_CSR_DONE         (0x0080)
-+#define MCF_EDMA_TCD10_CSR_LINKCH(x)    (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD10_CSR_BWC(x)       (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD11_SADDR */
-+#define MCF_EDMA_TCD11_SADDR_SADDR(x)   (x)
-+
-+/* Bit definitions and macros for TCD11_ATTR */
-+#define MCF_EDMA_TCD11_ATTR_DSIZE(x)    (((x)&0x0007))
-+#define MCF_EDMA_TCD11_ATTR_DMOD(x)     (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD11_ATTR_SSIZE(x)    (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD11_ATTR_SMOD(x)     (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD11_SOFF */
-+#define MCF_EDMA_TCD11_SOFF_SOFF(x)     (x)
-+
-+/* Bit definitions and macros for TCD11_NBYTES */
-+#define MCF_EDMA_TCD11_NBYTES_NBYTES(x)     (x)
-+
-+/* Bit definitions and macros for TCD11_SLAST */
-+#define MCF_EDMA_TCD11_SLAST_SLAST(x)   (x)
-+
-+/* Bit definitions and macros for TCD11_DADDR */
-+#define MCF_EDMA_TCD11_DADDR_DADDR(x)   (x)
-+
-+/* Bit definitions and macros for TCD11_CITER */
-+#define MCF_EDMA_TCD11_CITER_CITER(x)   (((x)&0x7FFF))
-+#define MCF_EDMA_TCD11_CITER_E_LINK     (0x8000)
-+
-+/* Bit definitions and macros for TCD11_CITER_ELINK */
-+#define MCF_EDMA_TCD11_CITER_ELINK_CITER(x)     (((x)&0x01FF))
-+#define MCF_EDMA_TCD11_CITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD11_CITER_ELINK_E_LINK       (0x8000)
-+
-+/* Bit definitions and macros for TCD11_DOFF */
-+#define MCF_EDMA_TCD11_DOFF_DOFF(x)     (x)
-+
-+/* Bit definitions and macros for TCD11_DLAST_SGA */
-+#define MCF_EDMA_TCD11_DLAST_SGA_DLAST_SGA(x)   (x)
-+
-+/* Bit definitions and macros for TCD11_BITER */
-+#define MCF_EDMA_TCD11_BITER_BITER(x)   (((x)&0x7FFF))
-+#define MCF_EDMA_TCD11_BITER_E_LINK     (0x8000)
-+
-+/* Bit definitions and macros for TCD11_BITER_ELINK */
-+#define MCF_EDMA_TCD11_BITER_ELINK_BITER(x)     (((x)&0x01FF))
-+#define MCF_EDMA_TCD11_BITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD11_BITER_ELINK_E_LINK       (0x8000)
-+
-+/* Bit definitions and macros for TCD11_CSR */
-+#define MCF_EDMA_TCD11_CSR_START        (0x0001)
-+#define MCF_EDMA_TCD11_CSR_INT_MAJOR    (0x0002)
-+#define MCF_EDMA_TCD11_CSR_INT_HALF     (0x0004)
-+#define MCF_EDMA_TCD11_CSR_D_REQ        (0x0008)
-+#define MCF_EDMA_TCD11_CSR_E_SG         (0x0010)
-+#define MCF_EDMA_TCD11_CSR_E_LINK       (0x0020)
-+#define MCF_EDMA_TCD11_CSR_ACTIVE       (0x0040)
-+#define MCF_EDMA_TCD11_CSR_DONE         (0x0080)
-+#define MCF_EDMA_TCD11_CSR_LINKCH(x)    (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD11_CSR_BWC(x)       (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD12_SADDR */
-+#define MCF_EDMA_TCD12_SADDR_SADDR(x)   (x)
-+
-+/* Bit definitions and macros for TCD12_ATTR */
-+#define MCF_EDMA_TCD12_ATTR_DSIZE(x)    (((x)&0x0007))
-+#define MCF_EDMA_TCD12_ATTR_DMOD(x)     (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD12_ATTR_SSIZE(x)    (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD12_ATTR_SMOD(x)     (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD12_SOFF */
-+#define MCF_EDMA_TCD12_SOFF_SOFF(x)     (x)
-+
-+/* Bit definitions and macros for TCD12_NBYTES */
-+#define MCF_EDMA_TCD12_NBYTES_NBYTES(x)     (x)
-+
-+/* Bit definitions and macros for TCD12_SLAST */
-+#define MCF_EDMA_TCD12_SLAST_SLAST(x)   (x)
-+
-+/* Bit definitions and macros for TCD12_DADDR */
-+#define MCF_EDMA_TCD12_DADDR_DADDR(x)   (x)
-+
-+/* Bit definitions and macros for TCD12_CITER */
-+#define MCF_EDMA_TCD12_CITER_CITER(x)   (((x)&0x7FFF))
-+#define MCF_EDMA_TCD12_CITER_E_LINK     (0x8000)
-+
-+/* Bit definitions and macros for TCD12_CITER_ELINK */
-+#define MCF_EDMA_TCD12_CITER_ELINK_CITER(x)     (((x)&0x01FF))
-+#define MCF_EDMA_TCD12_CITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD12_CITER_ELINK_E_LINK       (0x8000)
-+
-+/* Bit definitions and macros for TCD12_DOFF */
-+#define MCF_EDMA_TCD12_DOFF_DOFF(x)     (x)
-+
-+/* Bit definitions and macros for TCD12_DLAST_SGA */
-+#define MCF_EDMA_TCD12_DLAST_SGA_DLAST_SGA(x)   (x)
-+
-+/* Bit definitions and macros for TCD12_BITER */
-+#define MCF_EDMA_TCD12_BITER_BITER(x)   (((x)&0x7FFF))
-+#define MCF_EDMA_TCD12_BITER_E_LINK     (0x8000)
-+
-+/* Bit definitions and macros for TCD12_BITER_ELINK */
-+#define MCF_EDMA_TCD12_BITER_ELINK_BITER(x)     (((x)&0x01FF))
-+#define MCF_EDMA_TCD12_BITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD12_BITER_ELINK_E_LINK       (0x8000)
-+
-+/* Bit definitions and macros for TCD12_CSR */
-+#define MCF_EDMA_TCD12_CSR_START        (0x0001)
-+#define MCF_EDMA_TCD12_CSR_INT_MAJOR    (0x0002)
-+#define MCF_EDMA_TCD12_CSR_INT_HALF     (0x0004)
-+#define MCF_EDMA_TCD12_CSR_D_REQ        (0x0008)
-+#define MCF_EDMA_TCD12_CSR_E_SG         (0x0010)
-+#define MCF_EDMA_TCD12_CSR_E_LINK       (0x0020)
-+#define MCF_EDMA_TCD12_CSR_ACTIVE       (0x0040)
-+#define MCF_EDMA_TCD12_CSR_DONE         (0x0080)
-+#define MCF_EDMA_TCD12_CSR_LINKCH(x)    (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD12_CSR_BWC(x)       (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD13_SADDR */
-+#define MCF_EDMA_TCD13_SADDR_SADDR(x)   (x)
-+
-+/* Bit definitions and macros for TCD13_ATTR */
-+#define MCF_EDMA_TCD13_ATTR_DSIZE(x)    (((x)&0x0007))
-+#define MCF_EDMA_TCD13_ATTR_DMOD(x)     (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD13_ATTR_SSIZE(x)    (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD13_ATTR_SMOD(x)     (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD13_SOFF */
-+#define MCF_EDMA_TCD13_SOFF_SOFF(x)     (x)
-+
-+/* Bit definitions and macros for TCD13_NBYTES */
-+#define MCF_EDMA_TCD13_NBYTES_NBYTES(x)     (x)
-+
-+/* Bit definitions and macros for TCD13_SLAST */
-+#define MCF_EDMA_TCD13_SLAST_SLAST(x)   (x)
-+
-+/* Bit definitions and macros for TCD13_DADDR */
-+#define MCF_EDMA_TCD13_DADDR_DADDR(x)   (x)
-+
-+/* Bit definitions and macros for TCD13_CITER_ELINK */
-+#define MCF_EDMA_TCD13_CITER_ELINK_CITER(x)     (((x)&0x01FF))
-+#define MCF_EDMA_TCD13_CITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD13_CITER_ELINK_E_LINK       (0x8000)
-+
-+/* Bit definitions and macros for TCD13_CITER */
-+#define MCF_EDMA_TCD13_CITER_CITER(x)   (((x)&0x7FFF))
-+#define MCF_EDMA_TCD13_CITER_E_LINK     (0x8000)
-+
-+/* Bit definitions and macros for TCD13_DOFF */
-+#define MCF_EDMA_TCD13_DOFF_DOFF(x)     (x)
-+
-+/* Bit definitions and macros for TCD13_DLAST_SGA */
-+#define MCF_EDMA_TCD13_DLAST_SGA_DLAST_SGA(x)   (x)
-+
-+/* Bit definitions and macros for TCD13_BITER_ELINK */
-+#define MCF_EDMA_TCD13_BITER_ELINK_BITER(x)     (((x)&0x01FF))
-+#define MCF_EDMA_TCD13_BITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD13_BITER_ELINK_E_LINK       (0x8000)
-+
-+/* Bit definitions and macros for TCD13_BITER */
-+#define MCF_EDMA_TCD13_BITER_BITER(x)   (((x)&0x7FFF))
-+#define MCF_EDMA_TCD13_BITER_E_LINK     (0x8000)
-+
-+/* Bit definitions and macros for TCD13_CSR */
-+#define MCF_EDMA_TCD13_CSR_START        (0x0001)
-+#define MCF_EDMA_TCD13_CSR_INT_MAJOR    (0x0002)
-+#define MCF_EDMA_TCD13_CSR_INT_HALF     (0x0004)
-+#define MCF_EDMA_TCD13_CSR_D_REQ        (0x0008)
-+#define MCF_EDMA_TCD13_CSR_E_SG         (0x0010)
-+#define MCF_EDMA_TCD13_CSR_E_LINK       (0x0020)
-+#define MCF_EDMA_TCD13_CSR_ACTIVE       (0x0040)
-+#define MCF_EDMA_TCD13_CSR_DONE         (0x0080)
-+#define MCF_EDMA_TCD13_CSR_LINKCH(x)    (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD13_CSR_BWC(x)       (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD14_SADDR */
-+#define MCF_EDMA_TCD14_SADDR_SADDR(x)   (x)
-+
-+/* Bit definitions and macros for TCD14_ATTR */
-+#define MCF_EDMA_TCD14_ATTR_DSIZE(x)    (((x)&0x0007))
-+#define MCF_EDMA_TCD14_ATTR_DMOD(x)     (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD14_ATTR_SSIZE(x)    (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD14_ATTR_SMOD(x)     (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD14_SOFF */
-+#define MCF_EDMA_TCD14_SOFF_SOFF(x)     (x)
-+
-+/* Bit definitions and macros for TCD14_NBYTES */
-+#define MCF_EDMA_TCD14_NBYTES_NBYTES(x)     (x)
-+
-+/* Bit definitions and macros for TCD14_SLAST */
-+#define MCF_EDMA_TCD14_SLAST_SLAST(x)   (x)
-+
-+/* Bit definitions and macros for TCD14_DADDR */
-+#define MCF_EDMA_TCD14_DADDR_DADDR(x)   (x)
-+
-+/* Bit definitions and macros for TCD14_CITER */
-+#define MCF_EDMA_TCD14_CITER_CITER(x)   (((x)&0x7FFF))
-+#define MCF_EDMA_TCD14_CITER_E_LINK     (0x8000)
-+
-+/* Bit definitions and macros for TCD14_CITER_ELINK */
-+#define MCF_EDMA_TCD14_CITER_ELINK_CITER(x)     (((x)&0x01FF))
-+#define MCF_EDMA_TCD14_CITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD14_CITER_ELINK_E_LINK       (0x8000)
-+
-+/* Bit definitions and macros for TCD14_DOFF */
-+#define MCF_EDMA_TCD14_DOFF_DOFF(x)     (x)
-+
-+/* Bit definitions and macros for TCD14_DLAST_SGA */
-+#define MCF_EDMA_TCD14_DLAST_SGA_DLAST_SGA(x)   (x)
-+
-+/* Bit definitions and macros for TCD14_BITER_ELINK */
-+#define MCF_EDMA_TCD14_BITER_ELINK_BITER(x)     (((x)&0x01FF))
-+#define MCF_EDMA_TCD14_BITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD14_BITER_ELINK_E_LINK       (0x8000)
-+
-+/* Bit definitions and macros for TCD14_BITER */
-+#define MCF_EDMA_TCD14_BITER_BITER(x)   (((x)&0x7FFF))
-+#define MCF_EDMA_TCD14_BITER_E_LINK     (0x8000)
-+
-+/* Bit definitions and macros for TCD14_CSR */
-+#define MCF_EDMA_TCD14_CSR_START        (0x0001)
-+#define MCF_EDMA_TCD14_CSR_INT_MAJOR    (0x0002)
-+#define MCF_EDMA_TCD14_CSR_INT_HALF     (0x0004)
-+#define MCF_EDMA_TCD14_CSR_D_REQ        (0x0008)
-+#define MCF_EDMA_TCD14_CSR_E_SG         (0x0010)
-+#define MCF_EDMA_TCD14_CSR_E_LINK       (0x0020)
-+#define MCF_EDMA_TCD14_CSR_ACTIVE       (0x0040)
-+#define MCF_EDMA_TCD14_CSR_DONE         (0x0080)
-+#define MCF_EDMA_TCD14_CSR_LINKCH(x)    (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD14_CSR_BWC(x)       (((x)&0x0003)<<14)
-+
-+/* Bit definitions and macros for TCD15_SADDR */
-+#define MCF_EDMA_TCD15_SADDR_SADDR(x)   (x)
-+
-+/* Bit definitions and macros for TCD15_ATTR */
-+#define MCF_EDMA_TCD15_ATTR_DSIZE(x)    (((x)&0x0007))
-+#define MCF_EDMA_TCD15_ATTR_DMOD(x)     (((x)&0x001F)<<3)
-+#define MCF_EDMA_TCD15_ATTR_SSIZE(x)    (((x)&0x0007)<<8)
-+#define MCF_EDMA_TCD15_ATTR_SMOD(x)     (((x)&0x001F)<<11)
-+
-+/* Bit definitions and macros for TCD15_SOFF */
-+#define MCF_EDMA_TCD15_SOFF_SOFF(x)     (x)
-+
-+/* Bit definitions and macros for TCD15_NBYTES */
-+#define MCF_EDMA_TCD15_NBYTES_NBYTES(x)     (x)
-+
-+/* Bit definitions and macros for TCD15_SLAST */
-+#define MCF_EDMA_TCD15_SLAST_SLAST(x)   (x)
-+
-+/* Bit definitions and macros for TCD15_DADDR */
-+#define MCF_EDMA_TCD15_DADDR_DADDR(x)   (x)
-+
-+/* Bit definitions and macros for TCD15_CITER_ELINK */
-+#define MCF_EDMA_TCD15_CITER_ELINK_CITER(x)     (((x)&0x01FF))
-+#define MCF_EDMA_TCD15_CITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD15_CITER_ELINK_E_LINK       (0x8000)
-+
-+/* Bit definitions and macros for TCD15_CITER */
-+#define MCF_EDMA_TCD15_CITER_CITER(x)   (((x)&0x7FFF))
-+#define MCF_EDMA_TCD15_CITER_E_LINK     (0x8000)
-+
-+/* Bit definitions and macros for TCD15_DOFF */
-+#define MCF_EDMA_TCD15_DOFF_DOFF(x)     (x)
-+
-+/* Bit definitions and macros for TCD15_DLAST_SGA */
-+#define MCF_EDMA_TCD15_DLAST_SGA_DLAST_SGA(x)   (x)
-+
-+/* Bit definitions and macros for TCD15_BITER */
-+#define MCF_EDMA_TCD15_BITER_BITER(x)   (((x)&0x7FFF))
-+#define MCF_EDMA_TCD15_BITER_E_LINK     (0x8000)
-+
-+/* Bit definitions and macros for TCD15_BITER_ELINK */
-+#define MCF_EDMA_TCD15_BITER_ELINK_BITER(x)     (((x)&0x01FF))
-+#define MCF_EDMA_TCD15_BITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
-+#define MCF_EDMA_TCD15_BITER_ELINK_E_LINK       (0x8000)
-+
-+/* Bit definitions and macros for TCD15_CSR */
-+#define MCF_EDMA_TCD15_CSR_START        (0x0001)
-+#define MCF_EDMA_TCD15_CSR_INT_MAJOR    (0x0002)
-+#define MCF_EDMA_TCD15_CSR_INT_HALF     (0x0004)
-+#define MCF_EDMA_TCD15_CSR_D_REQ        (0x0008)
-+#define MCF_EDMA_TCD15_CSR_E_SG         (0x0010)
-+#define MCF_EDMA_TCD15_CSR_E_LINK       (0x0020)
-+#define MCF_EDMA_TCD15_CSR_ACTIVE       (0x0040)
-+#define MCF_EDMA_TCD15_CSR_DONE         (0x0080)
-+#define MCF_EDMA_TCD15_CSR_LINKCH(x)    (((x)&0x003F)<<8)
-+#define MCF_EDMA_TCD15_CSR_BWC(x)       (((x)&0x0003)<<14)
-+
-+#endif /* __MCF5445X_EDMA_H__ */
---- /dev/null
-+++ b/include/asm-m68k/mcf5445x_eport.h
-@@ -0,0 +1,117 @@
-+/*
-+ * Kurt Mahan kmahan@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_EPORT_H__
-+#define __MCF5445X_EPORT_H__
-+
-+/*********************************************************************
-+*
-+* Edge Port Module (EPORT)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_EPORT_EPPAR         MCF_REG16(0xFC094000)
-+#define MCF_EPORT_EPDDR         MCF_REG08(0xFC094002)
-+#define MCF_EPORT_EPIER         MCF_REG08(0xFC094003)
-+#define MCF_EPORT_EPDR          MCF_REG08(0xFC094004)
-+#define MCF_EPORT_EPPDR         MCF_REG08(0xFC094005)
-+#define MCF_EPORT_EPFR          MCF_REG08(0xFC094006)
-+
-+/* Bit definitions and macros for EPPAR */
-+#define MCF_EPORT_EPPAR_EPPA1(x)        (((x)&0x0003)<<2)
-+#define MCF_EPORT_EPPAR_EPPA2(x)        (((x)&0x0003)<<4)
-+#define MCF_EPORT_EPPAR_EPPA3(x)        (((x)&0x0003)<<6)
-+#define MCF_EPORT_EPPAR_EPPA4(x)        (((x)&0x0003)<<8)
-+#define MCF_EPORT_EPPAR_EPPA5(x)        (((x)&0x0003)<<10)
-+#define MCF_EPORT_EPPAR_EPPA6(x)        (((x)&0x0003)<<12)
-+#define MCF_EPORT_EPPAR_EPPA7(x)        (((x)&0x0003)<<14)
-+#define MCF_EPORT_EPPAR_LEVEL           (0)
-+#define MCF_EPORT_EPPAR_RISING          (1)
-+#define MCF_EPORT_EPPAR_FALLING         (2)
-+#define MCF_EPORT_EPPAR_BOTH            (3)
-+#define MCF_EPORT_EPPAR_EPPA7_LEVEL     (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA7_RISING    (0x4000)
-+#define MCF_EPORT_EPPAR_EPPA7_FALLING   (0x8000)
-+#define MCF_EPORT_EPPAR_EPPA7_BOTH      (0xC000)
-+#define MCF_EPORT_EPPAR_EPPA6_LEVEL     (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA6_RISING    (0x1000)
-+#define MCF_EPORT_EPPAR_EPPA6_FALLING   (0x2000)
-+#define MCF_EPORT_EPPAR_EPPA6_BOTH      (0x3000)
-+#define MCF_EPORT_EPPAR_EPPA5_LEVEL     (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA5_RISING    (0x0400)
-+#define MCF_EPORT_EPPAR_EPPA5_FALLING   (0x0800)
-+#define MCF_EPORT_EPPAR_EPPA5_BOTH      (0x0C00)
-+#define MCF_EPORT_EPPAR_EPPA4_LEVEL     (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA4_RISING    (0x0100)
-+#define MCF_EPORT_EPPAR_EPPA4_FALLING   (0x0200)
-+#define MCF_EPORT_EPPAR_EPPA4_BOTH      (0x0300)
-+#define MCF_EPORT_EPPAR_EPPA3_LEVEL     (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA3_RISING    (0x0040)
-+#define MCF_EPORT_EPPAR_EPPA3_FALLING   (0x0080)
-+#define MCF_EPORT_EPPAR_EPPA3_BOTH      (0x00C0)
-+#define MCF_EPORT_EPPAR_EPPA2_LEVEL     (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA2_RISING    (0x0010)
-+#define MCF_EPORT_EPPAR_EPPA2_FALLING   (0x0020)
-+#define MCF_EPORT_EPPAR_EPPA2_BOTH      (0x0030)
-+#define MCF_EPORT_EPPAR_EPPA1_LEVEL     (0x0000)
-+#define MCF_EPORT_EPPAR_EPPA1_RISING    (0x0004)
-+#define MCF_EPORT_EPPAR_EPPA1_FALLING   (0x0008)
-+#define MCF_EPORT_EPPAR_EPPA1_BOTH      (0x000C)
-+
-+/* Bit definitions and macros for EPDDR */
-+#define MCF_EPORT_EPDDR_EPDD1   (0x02)
-+#define MCF_EPORT_EPDDR_EPDD2   (0x04)
-+#define MCF_EPORT_EPDDR_EPDD3   (0x08)
-+#define MCF_EPORT_EPDDR_EPDD4   (0x10)
-+#define MCF_EPORT_EPDDR_EPDD5   (0x20)
-+#define MCF_EPORT_EPDDR_EPDD6   (0x40)
-+#define MCF_EPORT_EPDDR_EPDD7   (0x80)
-+
-+/* Bit definitions and macros for EPIER */
-+#define MCF_EPORT_EPIER_EPIE1   (0x02)
-+#define MCF_EPORT_EPIER_EPIE2   (0x04)
-+#define MCF_EPORT_EPIER_EPIE3   (0x08)
-+#define MCF_EPORT_EPIER_EPIE4   (0x10)
-+#define MCF_EPORT_EPIER_EPIE5   (0x20)
-+#define MCF_EPORT_EPIER_EPIE6   (0x40)
-+#define MCF_EPORT_EPIER_EPIE7   (0x80)
-+
-+/* Bit definitions and macros for EPDR */
-+#define MCF_EPORT_EPDR_EPD1     (0x02)
-+#define MCF_EPORT_EPDR_EPD2     (0x04)
-+#define MCF_EPORT_EPDR_EPD3     (0x08)
-+#define MCF_EPORT_EPDR_EPD4     (0x10)
-+#define MCF_EPORT_EPDR_EPD5     (0x20)
-+#define MCF_EPORT_EPDR_EPD6     (0x40)
-+#define MCF_EPORT_EPDR_EPD7     (0x80)
-+
-+/* Bit definitions and macros for EPPDR */
-+#define MCF_EPORT_EPPDR_EPPD1   (0x02)
-+#define MCF_EPORT_EPPDR_EPPD2   (0x04)
-+#define MCF_EPORT_EPPDR_EPPD3   (0x08)
-+#define MCF_EPORT_EPPDR_EPPD4   (0x10)
-+#define MCF_EPORT_EPPDR_EPPD5   (0x20)
-+#define MCF_EPORT_EPPDR_EPPD6   (0x40)
-+#define MCF_EPORT_EPPDR_EPPD7   (0x80)
-+
-+/* Bit definitions and macros for EPFR */
-+#define MCF_EPORT_EPFR_EPF1     (0x02)
-+#define MCF_EPORT_EPFR_EPF2     (0x04)
-+#define MCF_EPORT_EPFR_EPF3     (0x08)
-+#define MCF_EPORT_EPFR_EPF4     (0x10)
-+#define MCF_EPORT_EPFR_EPF5     (0x20)
-+#define MCF_EPORT_EPFR_EPF6     (0x40)
-+#define MCF_EPORT_EPFR_EPF7     (0x80)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_EPORT_H__ */
---- /dev/null
-+++ b/include/asm-m68k/mcf5445x_fbcs.h
-@@ -0,0 +1,182 @@
-+/*
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_FBCS_H__
-+#define __MCF5445X_FBCS_H__
-+
-+/*********************************************************************
-+*
-+* FlexBus Chip Selects (FBCS)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_FBCS_CSAR0	MCF_REG32(0xFC008000)   /* Chip-select Addr Register */
-+#define MCF_FBCS_CSMR0	MCF_REG32(0xFC008004)   /* Chip-select Mask Register */
-+#define MCF_FBCS_CSCR0	MCF_REG32(0xFC008008)   /* Chip-select Cntl Register */
-+#define MCF_FBCS_CSAR1	MCF_REG32(0xFC00800C)   /* Chip-select Addr Register */
-+#define MCF_FBCS_CSMR1	MCF_REG32(0xFC008010)   /* Chip-select Mask Register */
-+#define MCF_FBCS_CSCR1	MCF_REG32(0xFC008014)   /* Chip-select Cntl Register */
-+#define MCF_FBCS_CSAR2	MCF_REG32(0xFC008018)   /* Chip-select Addr Register */
-+#define MCF_FBCS_CSMR2	MCF_REG32(0xFC00801C)   /* Chip-select Mask Register */
-+#define MCF_FBCS_CSCR2	MCF_REG32(0xFC008020)   /* Chip-select Cntl Register */
-+#define MCF_FBCS_CSAR3	MCF_REG32(0xFC008024)   /* Chip-select Addr Register */
-+#define MCF_FBCS_CSMR3	MCF_REG32(0xFC008028)   /* Chip-select Mask Register */
-+#define MCF_FBCS_CSCR3	MCF_REG32(0xFC00802C)   /* Chip-select Cntl Register */
-+
-+/* Parameterized register read/write macros for multiple registers */
-+#define MCF_FBCS_CSAR(x)	MCF_REG32(0xFC008000+((x)*0x00C))   /* Chip-select Addr Register */
-+#define MCF_FBCS_CSMR(x)	MCF_REG32(0xFC008004+((x)*0x00C))   /* Chip-select Mask Register */
-+#define MCF_FBCS_CSCR(x)	MCF_REG32(0xFC008008+((x)*0x00C))   /* Chip-select Cntl Register */
-+
-+/* Bit definitions and macros for CSAR group */
-+#define MCF_FBCS_CSAR_BA(x)     ((x)&0xFFFF0000)
-+
-+/* Bit definitions and macros for CSAR0 */
-+#define MCF_FBCS_CSAR0_BA(x)    ((x)&0xFFFF0000)
-+
-+/* Bit definitions and macros for CSMR group */
-+#define MCF_FBCS_CSMR_V             (0x00000001)            /* Valid bit */
-+#define MCF_FBCS_CSMR_WP            (0x00000100)            /* Write protect */
-+#define MCF_FBCS_CSMR_BAM(x)        (((x)&0x0000FFFF)<<16)  /* Base addr mask */
-+#define MCF_FBCS_CSMR_BAM_4G        (0xFFFF0000)
-+#define MCF_FBCS_CSMR_BAM_2G        (0x7FFF0000)
-+#define MCF_FBCS_CSMR_BAM_1G        (0x3FFF0000)
-+#define MCF_FBCS_CSMR_BAM_1024M     (0x3FFF0000)
-+#define MCF_FBCS_CSMR_BAM_512M      (0x1FFF0000)
-+#define MCF_FBCS_CSMR_BAM_256M      (0x0FFF0000)
-+#define MCF_FBCS_CSMR_BAM_128M      (0x07FF0000)
-+#define MCF_FBCS_CSMR_BAM_64M       (0x03FF0000)
-+#define MCF_FBCS_CSMR_BAM_32M       (0x01FF0000)
-+#define MCF_FBCS_CSMR_BAM_16M       (0x00FF0000)
-+#define MCF_FBCS_CSMR_BAM_8M        (0x007F0000)
-+#define MCF_FBCS_CSMR_BAM_4M        (0x003F0000)
-+#define MCF_FBCS_CSMR_BAM_2M        (0x001F0000)
-+#define MCF_FBCS_CSMR_BAM_1M        (0x000F0000)
-+#define MCF_FBCS_CSMR_BAM_1024K     (0x000F0000)
-+#define MCF_FBCS_CSMR_BAM_512K      (0x00070000)
-+#define MCF_FBCS_CSMR_BAM_256K      (0x00030000)
-+#define MCF_FBCS_CSMR_BAM_128K      (0x00010000)
-+#define MCF_FBCS_CSMR_BAM_64K       (0x00000000)
-+
-+/* Bit definitions and macros for CSMR0 */
-+#define MCF_FBCS_CSMR0_V            (0x00000001)            /* Valid bit */
-+#define MCF_FBCS_CSMR0_WP           (0x00000100)            /* Write protect */
-+#define MCF_FBCS_CSMR0_BAM(x)       (((x)&0x0000FFFF)<<16)  /* Base addr mask */
-+#define MCF_FBCS_CSMR0_BAM_4G       (0xFFFF0000)
-+#define MCF_FBCS_CSMR0_BAM_2G       (0x7FFF0000)
-+#define MCF_FBCS_CSMR0_BAM_1G       (0x3FFF0000)
-+#define MCF_FBCS_CSMR0_BAM_1024M    (0x3FFF0000)
-+#define MCF_FBCS_CSMR0_BAM_512M     (0x1FFF0000)
-+#define MCF_FBCS_CSMR0_BAM_256M     (0x0FFF0000)
-+#define MCF_FBCS_CSMR0_BAM_128M     (0x07FF0000)
-+#define MCF_FBCS_CSMR0_BAM_64M      (0x03FF0000)
-+#define MCF_FBCS_CSMR0_BAM_32M      (0x01FF0000)
-+#define MCF_FBCS_CSMR0_BAM_16M      (0x00FF0000)
-+#define MCF_FBCS_CSMR0_BAM_8M       (0x007F0000)
-+#define MCF_FBCS_CSMR0_BAM_4M       (0x003F0000)
-+#define MCF_FBCS_CSMR0_BAM_2M       (0x001F0000)
-+#define MCF_FBCS_CSMR0_BAM_1M       (0x000F0000)
-+#define MCF_FBCS_CSMR0_BAM_1024K    (0x000F0000)
-+#define MCF_FBCS_CSMR0_BAM_512K     (0x00070000)
-+#define MCF_FBCS_CSMR0_BAM_256K     (0x00030000)
-+#define MCF_FBCS_CSMR0_BAM_128K     (0x00010000)
-+#define MCF_FBCS_CSMR0_BAM_64K      (0x00000000)
-+
-+/* Bit definitions and macros for CSCR group */
-+#define MCF_FBCS_CSCR_BSTW      (0x00000008)            /* Burst-write enable */
-+#define MCF_FBCS_CSCR_BSTR      (0x00000010)            /* Burst-read enable */
-+#define MCF_FBCS_CSCR_BEM       (0x00000020)            /* Byte-enable mode */
-+#define MCF_FBCS_CSCR_PS(x)     (((x)&0x00000003)<<6)   /* Port size */
-+#define MCF_FBCS_CSCR_AA        (0x00000100)            /* Auto-acknowledge */
-+#define MCF_FBCS_CSCR_WS(x)     (((x)&0x0000003F)<<10)  /* Wait states */
-+#define MCF_FBCS_CSCR_WRAH(x)   (((x)&0x00000003)<<16)  /* Write address hold or deselect */
-+#define MCF_FBCS_CSCR_RDAH(x)   (((x)&0x00000003)<<18)  /* Read address hold or deselect */
-+#define MCF_FBCS_CSCR_ASET(x)   (((x)&0x00000003)<<20)  /* Address setup */
-+#define MCF_FBCS_CSCR_SWSEN     (0x00800000)            /* Secondary wait state enable */
-+#define MCF_FBCS_CSCR_SWS(x)    (((x)&0x0000003F)<<26)  /* Secondary wait states */
-+#define MCF_FBCS_CSCR_PS_8      (0x00000040)
-+#define MCF_FBCS_CSCR_PS_16     (0x00000080)
-+#define MCF_FBCS_CSCR_PS_32     (0x00000000)
-+
-+/* Bit definitions and macros for CSCR0 */
-+#define MCF_FBCS_CSCR0_BSTW	(0x00000008)            /* Burst-write enable */
-+#define MCF_FBCS_CSCR0_BSTR	(0x00000010)            /* Burst-read enable */
-+#define MCF_FBCS_CSCR0_BEM	(0x00000020)            /* Byte-enable mode */
-+#define MCF_FBCS_CSCR0_PS(x)	(((x)&0x00000003)<<6)   /* Port size */
-+#define MCF_FBCS_CSCR0_AA	(0x00000100)            /* Auto-acknowledge */
-+#define MCF_FBCS_CSCR0_WS(x)	(((x)&0x0000003F)<<10)  /* Wait states */
-+#define MCF_FBCS_CSCR0_WRAH(x)	(((x)&0x00000003)<<16)  /* Write address hold or deselect */
-+#define MCF_FBCS_CSCR0_RDAH(x)	(((x)&0x00000003)<<18)  /* Read address hold or deselect */
-+#define MCF_FBCS_CSCR0_ASET(x)	(((x)&0x00000003)<<20)  /* Address setup */
-+#define MCF_FBCS_CSCR0_SWSEN	(0x00800000)            /* Secondary wait state enable */
-+#define MCF_FBCS_CSCR0_SWS(x)	(((x)&0x0000003F)<<26)  /* Secondary wait states */
-+#define MCF_FBCS_CSCR0_PS_8	(0x00000040)
-+#define MCF_FBCS_CSCR0_PS_16	(0x00000080)
-+#define MCF_FBCS_CSCR0_PS_32	(0x00000000)
-+
-+/* Bit definitions and macros for CSMR1 */
-+#define MCF_FBCS_CSMR1_V	(0x00000001)            /* Valid bit */
-+#define MCF_FBCS_CSMR1_WP	(0x00000100)            /* Write protect */
-+#define MCF_FBCS_CSMR1_BAM(x)	(((x)&0x0000FFFF)<<16)  /* Base address mask */
-+
-+/* Bit definitions and macros for CSCR1 */
-+#define MCF_FBCS_CSCR1_BSTW	(0x00000008)            /* Burst-write enable */
-+#define MCF_FBCS_CSCR1_BSTR	(0x00000010)            /* Burst-read enable */
-+#define MCF_FBCS_CSCR1_BEM	(0x00000020)            /* Byte-enable mode */
-+#define MCF_FBCS_CSCR1_PS(x)	(((x)&0x00000003)<<6)   /* Port size */
-+#define MCF_FBCS_CSCR1_AA	(0x00000100)            /* Auto-acknowledge */
-+#define MCF_FBCS_CSCR1_WS(x)	(((x)&0x0000003F)<<10)  /* Wait states */
-+#define MCF_FBCS_CSCR1_WRAH(x)	(((x)&0x00000003)<<16)  /* Write address hold or deselect */
-+#define MCF_FBCS_CSCR1_RDAH(x)	(((x)&0x00000003)<<18)  /* Read address hold or deselect */
-+#define MCF_FBCS_CSCR1_ASET(x)	(((x)&0x00000003)<<20)  /* Address setup */
-+#define MCF_FBCS_CSCR1_SWSEN	(0x00800000)            /* Secondary wait state enable */
-+#define MCF_FBCS_CSCR1_SWS(x)	(((x)&0x0000003F)<<26)  /* Secondary wait states */
-+
-+/* Bit definitions and macros for CSMR2 */
-+#define MCF_FBCS_CSMR2_V	(0x00000001)            /* Valid bit */
-+#define MCF_FBCS_CSMR2_WP	(0x00000100)            /* Write protect */
-+#define MCF_FBCS_CSMR2_BAM(x)	(((x)&0x0000FFFF)<<16)  /* Base address mask */
-+
-+/* Bit definitions and macros for CSCR2 */
-+#define MCF_FBCS_CSCR2_BSTW	(0x00000008)            /* Burst-write enable */
-+#define MCF_FBCS_CSCR2_BSTR	(0x00000010)            /* Burst-read enable */
-+#define MCF_FBCS_CSCR2_BEM	(0x00000020)            /* Byte-enable mode */
-+#define MCF_FBCS_CSCR2_PS(x)	(((x)&0x00000003)<<6)   /* Port size */
-+#define MCF_FBCS_CSCR2_AA	(0x00000100)            /* Auto-acknowledge */
-+#define MCF_FBCS_CSCR2_WS(x)	(((x)&0x0000003F)<<10)  /* Wait states */
-+#define MCF_FBCS_CSCR2_WRAH(x)	(((x)&0x00000003)<<16)  /* Write address hold or deselect */
-+#define MCF_FBCS_CSCR2_RDAH(x)	(((x)&0x00000003)<<18)  /* Read address hold or deselect */
-+#define MCF_FBCS_CSCR2_ASET(x)	(((x)&0x00000003)<<20)  /* Address setup */
-+#define MCF_FBCS_CSCR2_SWSEN	(0x00800000)            /* Secondary wait state enable */
-+#define MCF_FBCS_CSCR2_SWS(x)	(((x)&0x0000003F)<<26)  /* Secondary wait states */
-+
-+/* Bit definitions and macros for CSMR3 */
-+#define MCF_FBCS_CSMR3_V	(0x00000001)            /* Valid bit */
-+#define MCF_FBCS_CSMR3_WP	(0x00000100)            /* Write protect */
-+#define MCF_FBCS_CSMR3_BAM(x)	(((x)&0x0000FFFF)<<16)  /* Base address mask */
-+
-+/* Bit definitions and macros for CSCR3 */
-+#define MCF_FBCS_CSCR3_BSTW	(0x00000008)            /* Burst-write enable */
-+#define MCF_FBCS_CSCR3_BSTR	(0x00000010)            /* Burst-read enable */
-+#define MCF_FBCS_CSCR3_BEM	(0x00000020)            /* Byte-enable mode */
-+#define MCF_FBCS_CSCR3_PS(x)	(((x)&0x00000003)<<6)   /* Port size */
-+#define MCF_FBCS_CSCR3_AA	(0x00000100)            /* Auto-acknowledge */
-+#define MCF_FBCS_CSCR3_WS(x)	(((x)&0x0000003F)<<10)  /* Wait states */
-+#define MCF_FBCS_CSCR3_WRAH(x)	(((x)&0x00000003)<<16)  /* Write address hold or deselect */
-+#define MCF_FBCS_CSCR3_RDAH(x)	(((x)&0x00000003)<<18)  /* Read address hold or deselect */
-+#define MCF_FBCS_CSCR3_ASET(x)	(((x)&0x00000003)<<20)  /* Address setup */
-+#define MCF_FBCS_CSCR3_SWSEN	(0x00800000)            /* Secondary wait state enable */
-+#define MCF_FBCS_CSCR3_SWS(x)	(((x)&0x0000003F)<<26)  /* Secondary wait states */
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_FBCS_H__ */
---- /dev/null
-+++ b/include/asm-m68k/mcf5445x_gpio.h
-@@ -0,0 +1,1257 @@
-+/*
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_GPIO_H__
-+#define __MCF5445X_GPIO_H__
-+
-+/*********************************************************************
-+*
-+* General Purpose I/O Module (GPIO)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_GPIO_PODR_FEC0H	MCF_REG08(0xFC0A4000)	/* FEC0 High Port Output Data Register */
-+#define MCF_GPIO_PODR_FEC0L	MCF_REG08(0xFC0A4001)	/* FEC0 Low Port Output Data Register */
-+#define MCF_GPIO_PODR_SSI	MCF_REG08(0xFC0A4002)	/* SSI Port Output Data Register */
-+#define MCF_GPIO_PODR_FBCTL	MCF_REG08(0xFC0A4003)	/* Flexbus Control Port Output Data Register */
-+#define MCF_GPIO_PODR_BE	MCF_REG08(0xFC0A4004)	/* Flexbus Byte Enable Port Output Data Register */
-+#define MCF_GPIO_PODR_CS	MCF_REG08(0xFC0A4005)	/* Flexbus Chip-Select Port Output Data Register */
-+#define MCF_GPIO_PODR_DMA	MCF_REG08(0xFC0A4006)	/* DMA Port Output Data Register */
-+#define MCF_GPIO_PODR_FECI2C	MCF_REG08(0xFC0A4007)	/* FEC1 / I2C Port Output Data Register */
-+#define MCF_GPIO_PODR_UART	MCF_REG08(0xFC0A4009)	/* UART Port Output Data Register */
-+#define MCF_GPIO_PODR_DSPI	MCF_REG08(0xFC0A400A)	/* DSPI Port Output Data Register */
-+#define MCF_GPIO_PODR_TIMER	MCF_REG08(0xFC0A400B)	/* Timer Port Output Data Register */
-+#define MCF_GPIO_PODR_PCI	MCF_REG08(0xFC0A400C)	/* PCI Port Output Data Register */
-+#define MCF_GPIO_PODR_USB	MCF_REG08(0xFC0A400D)	/* USB Port Output Data Register */
-+#define MCF_GPIO_PODR_ATAH	MCF_REG08(0xFC0A400E)	/* ATA High Port Output Data Register */
-+#define MCF_GPIO_PODR_ATAL	MCF_REG08(0xFC0A400F)	/* ATA Low Port Output Data Register */
-+#define MCF_GPIO_PODR_FEC1H	MCF_REG08(0xFC0A4010)	/* FEC1 High Port Output Data Register */
-+#define MCF_GPIO_PODR_FEC1L	MCF_REG08(0xFC0A4011)	/* FEC1 Low Port Output Data Register */
-+#define MCF_GPIO_PODR_FBADH	MCF_REG08(0xFC0A4014)	/* Flexbus AD High Port Output Data Register */
-+#define MCF_GPIO_PODR_FBADMH	MCF_REG08(0xFC0A4015)	/* Flexbus AD Med-High Port Output Data Register */
-+#define MCF_GPIO_PODR_FBADML	MCF_REG08(0xFC0A4016)	/* Flexbus AD Med-Low Port Output Data Register */
-+#define MCF_GPIO_PODR_FBADL	MCF_REG08(0xFC0A4017)	/* Flexbus AD Low Port Output Data Register */
-+#define MCF_GPIO_PDDR_FEC0H	MCF_REG08(0xFC0A4018)	/* FEC0 High Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FEC0L	MCF_REG08(0xFC0A4019)	/* FEC0 Low Port Data Direction Register */
-+#define MCF_GPIO_PDDR_SSI	MCF_REG08(0xFC0A401A)	/* SSI Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FBCTL	MCF_REG08(0xFC0A401B)	/* Flexbus Control Port Data Direction Register */
-+#define MCF_GPIO_PDDR_BE	MCF_REG08(0xFC0A401C)	/* Flexbus Byte Enable Port Data Direction Register */
-+#define MCF_GPIO_PDDR_CS	MCF_REG08(0xFC0A401D)	/* Flexbus Chip-Select Port Data Direction Register */
-+#define MCF_GPIO_PDDR_DMA	MCF_REG08(0xFC0A401E)	/* DMA Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FECI2C	MCF_REG08(0xFC0A401F)	/* FEC1 / I2C Port Data Direction Register */
-+#define MCF_GPIO_PDDR_UART	MCF_REG08(0xFC0A4021)	/* UART Port Data Direction Register */
-+#define MCF_GPIO_PDDR_DSPI	MCF_REG08(0xFC0A4022)	/* DSPI Port Data Direction Register */
-+#define MCF_GPIO_PDDR_TIMER	MCF_REG08(0xFC0A4023)	/* Timer Port Data Direction Register */
-+#define MCF_GPIO_PDDR_PCI	MCF_REG08(0xFC0A4024)	/* PCI Port Data Direction Register */
-+#define MCF_GPIO_PDDR_USB	MCF_REG08(0xFC0A4025)	/* USB Port Data Direction Register */
-+#define MCF_GPIO_PDDR_ATAH	MCF_REG08(0xFC0A4026)	/* ATA High Port Data Direction Register */
-+#define MCF_GPIO_PDDR_ATAL	MCF_REG08(0xFC0A4027)	/* ATA Low Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FEC1H	MCF_REG08(0xFC0A4028)	/* FEC1 High Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FEC1L	MCF_REG08(0xFC0A4029)	/* FEC1 Low Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FBADH	MCF_REG08(0xFC0A402C)	/* Flexbus AD High Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FBADMH	MCF_REG08(0xFC0A402D)	/* Flexbus AD Med-High Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FBADML	MCF_REG08(0xFC0A402E)	/* Flexbus AD Med-Low Port Data Direction Register */
-+#define MCF_GPIO_PDDR_FBADL	MCF_REG08(0xFC0A402F)	/* Flexbus AD Low Port Data Direction Register */
-+#define MCF_GPIO_PPDSDR_FEC0H	MCF_REG08(0xFC0A4030)	/* FEC0 High Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FEC0L	MCF_REG08(0xFC0A4031)	/* FEC0 Low Port Clear Output Data Register */
-+#define MCF_GPIO_PPDSDR_SSI	MCF_REG08(0xFC0A4032)	/* SSI Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FBCTL	MCF_REG08(0xFC0A4033)	/* Flexbus Control Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_BE	MCF_REG08(0xFC0A4034)	/* Flexbus Byte Enable Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_CS	MCF_REG08(0xFC0A4035)	/* Flexbus Chip-Select Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_DMA	MCF_REG08(0xFC0A4036)	/* DMA Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FECI2C	MCF_REG08(0xFC0A4037)	/* FEC1 / I2C Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_UART	MCF_REG08(0xFC0A4039)	/* UART Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_DSPI	MCF_REG08(0xFC0A403A)	/* DSPI Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_TIMER	MCF_REG08(0xFC0A403B)	/* FTimer Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_PCI	MCF_REG08(0xFC0A403C)	/* PCI Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_USB	MCF_REG08(0xFC0A403D)	/* USB Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_ATAH	MCF_REG08(0xFC0A403E)	/* ATA High Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_ATAL	MCF_REG08(0xFC0A403F)	/* ATA Low Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FEC1H	MCF_REG08(0xFC0A4040)	/* FEC1 High Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FEC1L	MCF_REG08(0xFC0A4041)	/* FEC1 Low Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FBADH	MCF_REG08(0xFC0A4044)	/* Flexbus AD High Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FBADMH	MCF_REG08(0xFC0A4045)	/* Flexbus AD Med-High Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FBADML	MCF_REG08(0xFC0A4046)	/* Flexbus AD Med-Low Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PPDSDR_FBADL	MCF_REG08(0xFC0A4047)	/* Flexbus AD Low Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PCLRR_FEC0H	MCF_REG08(0xFC0A4048)	/* FEC0 High Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FEC0L	MCF_REG08(0xFC0A4049)	/* FEC0 Low Port Pin Data/Set Data Register */
-+#define MCF_GPIO_PCLRR_SSI	MCF_REG08(0xFC0A404A)	/* SSI Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FBCTL	MCF_REG08(0xFC0A404B)	/* Flexbus Control Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_BE	MCF_REG08(0xFC0A404C)	/* Flexbus Byte Enable Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_CS	MCF_REG08(0xFC0A404D)	/* Flexbus Chip-Select Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_DMA	MCF_REG08(0xFC0A404E)	/* DMA Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FECI2C	MCF_REG08(0xFC0A404F)	/* FEC1 / I2C Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_UART	MCF_REG08(0xFC0A4051)	/* UART Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_DSPI	MCF_REG08(0xFC0A4052)	/* DSPI Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_TIMER	MCF_REG08(0xFC0A4053)	/* Timer Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_PCI	MCF_REG08(0xFC0A4054)	/* PCI Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_USB	MCF_REG08(0xFC0A4055)	/* USB Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_ATAH	MCF_REG08(0xFC0A4056)	/* ATA High Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_ATAL	MCF_REG08(0xFC0A4057)	/* ATA Low Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FEC1H	MCF_REG08(0xFC0A4058)	/* FEC1 High Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FEC1L	MCF_REG08(0xFC0A4059)	/* FEC1 Low Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FBADH	MCF_REG08(0xFC0A405C)	/* Flexbus AD High Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FBADMH	MCF_REG08(0xFC0A405D)	/* Flexbus AD Med-High Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FBADML	MCF_REG08(0xFC0A405E)	/* Flexbus AD Med-Low Port Clear Output Data Register */
-+#define MCF_GPIO_PCLRR_FBADL	MCF_REG08(0xFC0A405F)	/* Flexbus AD Low Port Clear Output Data Register */
-+#define MCF_GPIO_PAR_FEC	MCF_REG08(0xFC0A4060)	/* FEC Pin Assignment Register */
-+#define MCF_GPIO_PAR_DMA	MCF_REG08(0xFC0A4061)	/* DMA Pin Assignment Register */
-+#define MCF_GPIO_PAR_FBCTL	MCF_REG08(0xFC0A4062)	/* Flexbus Control Pin Assignment Register */
-+#define MCF_GPIO_PAR_DSPI	MCF_REG08(0xFC0A4063)	/* DSPI Pin Assignment Register */
-+#define MCF_GPIO_PAR_BE		MCF_REG08(0xFC0A4064)	/* Flexbus Byte-Enable Pin Assignment Register */
-+#define MCF_GPIO_PAR_CS		MCF_REG08(0xFC0A4065)	/* Flexbus Chip-Select Pin Assignment Register */
-+#define MCF_GPIO_PAR_TIMER	MCF_REG08(0xFC0A4066)	/* Time Pin Assignment Register */
-+#define MCF_GPIO_PAR_USB	MCF_REG08(0xFC0A4067)	/* USB Pin Assignment Register */
-+#define MCF_GPIO_PAR_UART	MCF_REG08(0xFC0A4069)	/* UART Pin Assignment Register */
-+#define MCF_GPIO_PAR_FECI2C	MCF_REG16(0xFC0A406A)	/* FEC / I2C Pin Assignment Register */
-+#define MCF_GPIO_PAR_SSI	MCF_REG16(0xFC0A406C)	/* SSI Pin Assignment Register */
-+#define MCF_GPIO_PAR_ATA	MCF_REG16(0xFC0A406E)	/* ATA Pin Assignment Register */
-+#define MCF_GPIO_PAR_IRQ	MCF_REG08(0xFC0A4070)	/* IRQ Pin Assignment Register */
-+#define MCF_GPIO_PAR_PCI	MCF_REG16(0xFC0A4072)	/* PCI Pin Assignment Register */
-+#define MCF_GPIO_MSCR_SDRAM	MCF_REG08(0xFC0A4074)	/* SDRAM Mode Select Control Register */
-+#define MCF_GPIO_MSCR_PCI	MCF_REG08(0xFC0A4075)	/* PCI Mode Select Control Register */
-+#define MCF_GPIO_DSCR_I2C	MCF_REG08(0xFC0A4078)	/* I2C Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_FLEXBUS	MCF_REG08(0xFC0A4079)	/* FLEXBUS Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_FEC	MCF_REG08(0xFC0A407A)	/* FEC Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_UART	MCF_REG08(0xFC0A407B)	/* UART Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_DSPI	MCF_REG08(0xFC0A407C)	/* DSPI Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_TIMER	MCF_REG08(0xFC0A407D)	/* TIMER Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_SSI	MCF_REG08(0xFC0A407E)	/* SSI Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_DMA	MCF_REG08(0xFC0A407F)	/* DMA Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_DEBUG	MCF_REG08(0xFC0A4080)	/* DEBUG Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_RESET	MCF_REG08(0xFC0A4081)	/* RESET Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_IRQ	MCF_REG08(0xFC0A4082)	/* IRQ Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_USB	MCF_REG08(0xFC0A4083)	/* USB Drive Strength Control Register */
-+#define MCF_GPIO_DSCR_ATA	MCF_REG08(0xFC0A4084)	/* ATA Drive Strength Control Register */
-+
-+/* Bit definitions and macros for PODR_FEC0H */
-+#define MCF_GPIO_PODR_FEC0H_PODR0	(0x01)	/* FEC0_CRS / ULPI_DATA6 */
-+#define MCF_GPIO_PODR_FEC0H_PODR1	(0x02)	/* FEC0_RXD0 / FEC0_RMII_RXD0 */
-+#define MCF_GPIO_PODR_FEC0H_PODR2	(0x04)	/* FEC0_RXDV/FEC0_RMII_CRS_DV */
-+#define MCF_GPIO_PODR_FEC0H_PODR3	(0x08)	/* FEC0_RXCLK / ULPI_DATA1 */
-+#define MCF_GPIO_PODR_FEC0H_PODR4	(0x10)	/* FEC0_COL / ULPI_DATA7 */
-+#define MCF_GPIO_PODR_FEC0H_PODR5	(0x20)	/* FEC0_TXD0 / FEC0_RMII_TXD0 */
-+#define MCF_GPIO_PODR_FEC0H_PODR6	(0x40)	/* FEC0_TXEN / FEC0_RMII_TXEN */
-+#define MCF_GPIO_PODR_FEC0H_PODR7	(0x80)	/* FEC0_TXCLK / FEC0_RMII_REF_CLK */
-+
-+/* Bit definitions and macros for PODR_FEC0L */
-+#define MCF_GPIO_PODR_FEC0L_PODR0	(0x01)	/* FEC0_RXER / FEC0_RMII_RXER */
-+#define MCF_GPIO_PODR_FEC0L_PODR1	(0x02)	/* FEC0_RXD1 / FEC0_RMII_RXD1 */
-+#define MCF_GPIO_PODR_FEC0L_PODR2	(0x04)	/* FEC0_RXD2 / ULPI_DATA4 */
-+#define MCF_GPIO_PODR_FEC0L_PODR3	(0x08)	/* FEC0_RXD3 / ULPI_DATA5 */
-+#define MCF_GPIO_PODR_FEC0L_PODR4	(0x10)	/* FEC0_TXER / ULPI_DATA0 */
-+#define MCF_GPIO_PODR_FEC0L_PODR5	(0x20)	/* FEC0_TXD1 / FEC0_RMII_TXD1 */
-+#define MCF_GPIO_PODR_FEC0L_PODR6	(0x40)	/* FEC0_TXD2 / ULPI_DATA2 */
-+#define MCF_GPIO_PODR_FEC0L_PODR7	(0x80)	/* FEC0_TXD3 / ULPI_DATA3 */
-+
-+/* Bit definitions and macros for PODR_SSI */
-+#define MCF_GPIO_PODR_SSI_PODR0		(0x01)	/* SSI_TXD / U1TXD */
-+#define MCF_GPIO_PODR_SSI_PODR1		(0x02)	/* SSI_RXD / U1RXD */
-+#define MCF_GPIO_PODR_SSI_PODR2		(0x04)	/* SSI_FS / U1RTS */
-+#define MCF_GPIO_PODR_SSI_PODR3		(0x08)	/* SSI_BCLK / U1CTS */
-+#define MCF_GPIO_PODR_SSI_PODR4		(0x10)	/* SSI_MCLK */
-+
-+/* Bit definitions and macros for PODR_FBCTL */
-+#define MCF_GPIO_PODR_FBCTL_PODR0	(0x01)	/* FB_TS / FB_ALE / FB_TBST */
-+#define MCF_GPIO_PODR_FBCTL_PODR1	(0x02)	/* FB_RW */
-+#define MCF_GPIO_PODR_FBCTL_PODR2	(0x04)	/* FB_TA */
-+#define MCF_GPIO_PODR_FBCTL_PODR3	(0x08)	/* FB_OE */
-+
-+/* Bit definitions and macros for PODR_BE */
-+#define MCF_GPIO_PODR_BE_PODR0		(0x01)	/* FB_BE/BWE0 / FB_SIZ0 */
-+#define MCF_GPIO_PODR_BE_PODR1		(0x02)	/* FB_BE/BWE1 / FB_SIZ1 */
-+#define MCF_GPIO_PODR_BE_PODR2		(0x04)	/* FB_BE/BWE2 / FB_SIZ2 */
-+#define MCF_GPIO_PODR_BE_PODR3		(0x08)	/* FB_BE/BWE3 / FB_SIZ3 */
-+
-+/* Bit definitions and macros for PODR_CS */
-+#define MCF_GPIO_PODR_CS_PODR1		(0x02)	/* FB_CS1 */
-+#define MCF_GPIO_PODR_CS_PODR2		(0x04)	/* FB_CS2 */
-+#define MCF_GPIO_PODR_CS_PODR3		(0x08)	/* FB_CS3 */
-+
-+/* Bit definitions and macros for PODR_DMA */
-+#define MCF_GPIO_PODR_DMA_PODR0		(0x01)	/* DREQ0 */
-+#define MCF_GPIO_PODR_DMA_PODR1		(0x02)	/* DACK0 / DSPI_PCS3 */
-+#define MCF_GPIO_PODR_DMA_PODR2		(0x04)	/* DREQ1 / USB_CLKIN */
-+#define MCF_GPIO_PODR_DMA_PODR3		(0x08)	/* DACK1 / ULPI_DIR */
-+
-+/* Bit definitions and macros for PODR_FECI2C */
-+#define MCF_GPIO_PODR_FECI2C_PODR0	(0x01)	/* I2C_SDA / U2RXD */
-+#define MCF_GPIO_PODR_FECI2C_PODR1	(0x02)	/* I2C_SCL / U2TXD */
-+#define MCF_GPIO_PODR_FECI2C_PODR2	(0x04)	/* FEC0_MDIO */
-+#define MCF_GPIO_PODR_FECI2C_PODR3	(0x08)	/* FEC0_MDC */
-+#define MCF_GPIO_PODR_FECI2C_PODR4	(0x10)	/* FEC1_MDIO / ATA_DIOW */
-+#define MCF_GPIO_PODR_FECI2C_PODR5	(0x20)	/* FEC1_MDC / ATA_DIOR */
-+
-+/* Bit definitions and macros for PODR_UART */
-+#define MCF_GPIO_PODR_UART_PODR0	(0x01)	/* U1TXD */
-+#define MCF_GPIO_PODR_UART_PODR1	(0x02)	/* U1RXD */
-+#define MCF_GPIO_PODR_UART_PODR2	(0x04)	/* U1RTS */
-+#define MCF_GPIO_PODR_UART_PODR3	(0x08)	/* U0CTS */
-+#define MCF_GPIO_PODR_UART_PODR4	(0x10)	/* U1TXD */
-+#define MCF_GPIO_PODR_UART_PODR5	(0x20)	/* U1RXD */
-+#define MCF_GPIO_PODR_UART_PODR6	(0x40)	/* U1RTS */
-+#define MCF_GPIO_PODR_UART_PODR7	(0x80)	/* U1CTS */
-+
-+/* Bit definitions and macros for PODR_DSPI */
-+#define MCF_GPIO_PODR_DSPI_PODR0	(0x01)	/* DSPI_SOUT / SBF_DO */
-+#define MCF_GPIO_PODR_DSPI_PODR1	(0x02)	/* DSPI_SIN / SBF_DI */
-+#define MCF_GPIO_PODR_DSPI_PODR2	(0x04)	/* DSPI_SCK / SBF_CK */
-+#define MCF_GPIO_PODR_DSPI_PODR3	(0x08)	/* DSPI_PCS0/SS */
-+#define MCF_GPIO_PODR_DSPI_PODR4	(0x10)	/* DSPI_PCS1 / SBF_CS */
-+#define MCF_GPIO_PODR_DSPI_PODR5	(0x20)	/* DSPI_PCS2 */
-+#define MCF_GPIO_PODR_DSPI_PODR6	(0x40)	/* DSPI_PCS5/SS */
-+
-+/* Bit definitions and macros for PODR_TIMER */
-+#define MCF_GPIO_PODR_TIMER_PODR0	(0x01)	/* T0IN / T0OUT / U2RTS */
-+#define MCF_GPIO_PODR_TIMER_PODR1	(0x02)	/* T1IN / T1OUT / U2CTS */
-+#define MCF_GPIO_PODR_TIMER_PODR2	(0x04)	/* T2IN / T2OUT / U2TXD */
-+#define MCF_GPIO_PODR_TIMER_PODR3	(0x08)	/* T3IN / T3OUT / U2RXD */
-+
-+/* Bit definitions and macros for PODR_PCI */
-+#define MCF_GPIO_PODR_PCI_PODR0		(0x01)	/* PCI_REQ0/PCI_EXTGNT */
-+#define MCF_GPIO_PODR_PCI_PODR1		(0x02)	/* PCI_REQ1 */
-+#define MCF_GPIO_PODR_PCI_PODR2		(0x04)	/* PCI_REQ2 */
-+#define MCF_GPIO_PODR_PCI_PODR3		(0x08)	/* PCI_REQ3 / ATA_INTR */
-+#define MCF_GPIO_PODR_PCI_PODR4		(0x10)	/* PCI_GNT0/PCI_EXTREQ */
-+#define MCF_GPIO_PODR_PCI_PODR5		(0x20)	/* PCI_GNT1 /  */
-+#define MCF_GPIO_PODR_PCI_PODR6		(0x40)	/* PCI_GNT2 /  */
-+#define MCF_GPIO_PODR_PCI_PODR7		(0x80)	/* PCI_GNT3 / ATA_DMACK */
-+
-+/* Bit definitions and macros for PODR_USB */
-+#define MCF_GPIO_PODR_USB_PODR0		(0x01)	/* USB_VBUS_OC / ULPI_STP */
-+#define MCF_GPIO_PODR_USB_PODR1		(0x02)	/* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */
-+
-+/* Bit definitions and macros for PODR_ATAH */
-+#define MCF_GPIO_PODR_ATAH_PODR0	(0x01)	/* ATA_DA0 */
-+#define MCF_GPIO_PODR_ATAH_PODR1	(0x02)	/* ATA_DA1 */
-+#define MCF_GPIO_PODR_ATAH_PODR2	(0x04)	/* ATA_DA2 */
-+#define MCF_GPIO_PODR_ATAH_PODR3	(0x08)	/* ATA_CS0 */
-+#define MCF_GPIO_PODR_ATAH_PODR4	(0x10)	/* ATA_CS1 */
-+#define MCF_GPIO_PODR_ATAH_PODR5	(0x20)	/* ATA_BUFFER_EN */
-+
-+/* Bit definitions and macros for PODR_ATAL */
-+#define MCF_GPIO_PODR_ATAL_PODR0	(0x01)	/* ATA_IORDY */
-+#define MCF_GPIO_PODR_ATAL_PODR1	(0x02)	/* ATA_DMARQ */
-+#define MCF_GPIO_PODR_ATAL_PODR2	(0x04)	/* ATA_RESET */
-+
-+/* Bit definitions and macros for PODR_FEC1H */
-+#define MCF_GPIO_PODR_FEC1H_PODR0	(0x01)	/* FEC1_CRS / ATA_DATA6 */
-+#define MCF_GPIO_PODR_FEC1H_PODR1	(0x02)	/* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */
-+#define MCF_GPIO_PODR_FEC1H_PODR2	(0x04)	/* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */
-+#define MCF_GPIO_PODR_FEC1H_PODR3	(0x08)	/* FEC1_RXCLK / ATA_DATA5 */
-+#define MCF_GPIO_PODR_FEC1H_PODR4	(0x10)	/* FEC1_COL / ATA_DATA7 */
-+#define MCF_GPIO_PODR_FEC1H_PODR5	(0x20)	/* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */
-+#define MCF_GPIO_PODR_FEC1H_PODR6	(0x40)	/* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */
-+#define MCF_GPIO_PODR_FEC1H_PODR7	(0x80)	/* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */
-+
-+/* Bit definitions and macros for PODR_FEC1L */
-+#define MCF_GPIO_PODR_FEC1L_PODR0	(0x01)	/* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */
-+#define MCF_GPIO_PODR_FEC1L_PODR1	(0x02)	/* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */
-+#define MCF_GPIO_PODR_FEC1L_PODR2	(0x04)	/* FEC1_RXD2 / ATA_DATA3 */
-+#define MCF_GPIO_PODR_FEC1L_PODR3	(0x08)	/* FEC1_RXD3 / ATA_DATA4 */
-+#define MCF_GPIO_PODR_FEC1L_PODR4	(0x10)	/* FEC1_TXER / ATA_DATA0 */
-+#define MCF_GPIO_PODR_FEC1L_PODR5	(0x20)	/* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */
-+#define MCF_GPIO_PODR_FEC1L_PODR6	(0x40)	/* FEC1_TXD2 / ATA_DATA1 */
-+#define MCF_GPIO_PODR_FEC1L_PODR7	(0x80)	/* FEC1_TXD3 / ATA_DATA2 */
-+
-+/* Bit definitions and macros for PODR_FBADH */
-+#define MCF_GPIO_PODR_FBADH_PODR0	(0x01)	/* FB_AD24 */
-+#define MCF_GPIO_PODR_FBADH_PODR1	(0x02)	/* FB_AD25 */
-+#define MCF_GPIO_PODR_FBADH_PODR2	(0x04)	/* FB_AD26 */
-+#define MCF_GPIO_PODR_FBADH_PODR3	(0x08)	/* FB_AD27 */
-+#define MCF_GPIO_PODR_FBADH_PODR4	(0x10)	/* FB_AD28 */
-+#define MCF_GPIO_PODR_FBADH_PODR5	(0x20)	/* FB_AD29 */
-+#define MCF_GPIO_PODR_FBADH_PODR6	(0x40)	/* FB_AD30 */
-+#define MCF_GPIO_PODR_FBADH_PODR7	(0x80)	/* FB_AD31 */
-+
-+/* Bit definitions and macros for PODR_FBADMH */
-+#define MCF_GPIO_PODR_FBADMH_PODR0	(0x01)	/* FB_AD16 */
-+#define MCF_GPIO_PODR_FBADMH_PODR1	(0x02)	/* FB_AD17 */
-+#define MCF_GPIO_PODR_FBADMH_PODR2	(0x04)	/* FB_AD18 */
-+#define MCF_GPIO_PODR_FBADMH_PODR3	(0x08)	/* FB_AD19 */
-+#define MCF_GPIO_PODR_FBADMH_PODR4	(0x10)	/* FB_AD20 */
-+#define MCF_GPIO_PODR_FBADMH_PODR5	(0x20)	/* FB_AD21 */
-+#define MCF_GPIO_PODR_FBADMH_PODR6	(0x40)	/* FB_AD22 */
-+#define MCF_GPIO_PODR_FBADMH_PODR7	(0x80)	/* FB_AD23 */
-+
-+/* Bit definitions and macros for PODR_FBADML */
-+#define MCF_GPIO_PODR_FBADML_PODR0	(0x01)	/* FB_AD8 */
-+#define MCF_GPIO_PODR_FBADML_PODR1	(0x02)	/* FB_AD9 */
-+#define MCF_GPIO_PODR_FBADML_PODR2	(0x04)	/* FB_AD10 */
-+#define MCF_GPIO_PODR_FBADML_PODR3	(0x08)	/* FB_AD11 */
-+#define MCF_GPIO_PODR_FBADML_PODR4	(0x10)	/* FB_AD12 */
-+#define MCF_GPIO_PODR_FBADML_PODR5	(0x20)	/* FB_AD13 */
-+#define MCF_GPIO_PODR_FBADML_PODR6	(0x40)	/* FB_AD14 */
-+#define MCF_GPIO_PODR_FBADML_PODR7	(0x80)	/* FB_AD15 */
-+
-+/* Bit definitions and macros for PODR_FBADL */
-+#define MCF_GPIO_PODR_FBADL_PODR0	(0x01)	/* FB_AD0 */
-+#define MCF_GPIO_PODR_FBADL_PODR1	(0x02)	/* FB_AD1 */
-+#define MCF_GPIO_PODR_FBADL_PODR2	(0x04)	/* FB_AD2 */
-+#define MCF_GPIO_PODR_FBADL_PODR3	(0x08)	/* FB_AD3 */
-+#define MCF_GPIO_PODR_FBADL_PODR4	(0x10)	/* FB_AD4 */
-+#define MCF_GPIO_PODR_FBADL_PODR5	(0x20)	/* FB_AD5 */
-+#define MCF_GPIO_PODR_FBADL_PODR6	(0x40)	/* FB_AD6 */
-+#define MCF_GPIO_PODR_FBADL_PODR7	(0x80)	/* FB_AD7 */
-+
-+/* Bit definitions and macros for PDDR_FEC0H */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR0	(0x01)	/* FEC0_CRS / ULPI_DATA6 */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR1	(0x02)	/* FEC0_RXD0 / FEC0_RMII_RXD0 */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR2	(0x04)	/* FEC0_RXDV/FEC0_RMII_CRS_DV */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR3	(0x08)	/* FEC0_RXCLK / ULPI_DATA1 */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR4	(0x10)	/* FEC0_COL / ULPI_DATA7 */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR5	(0x20)	/* FEC0_TXD0 / FEC0_RMII_TXD0 */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR6	(0x40)	/* FEC0_TXEN / FEC0_RMII_TXEN */
-+#define MCF_GPIO_PDDR_FEC0H_PDDR7	(0x80)	/* FEC0_TXCLK / FEC0_RMII_REF_CLK */
-+
-+/* Bit definitions and macros for PDDR_FEC0L */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR0	(0x01)	/* FEC0_RXER / FEC0_RMII_RXER */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR1	(0x02)	/* FEC0_RXD1 / FEC0_RMII_RXD1 */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR2	(0x04)	/* FEC0_RXD2 / ULPI_DATA4 */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR3	(0x08)	/* FEC0_RXD3 / ULPI_DATA5 */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR4	(0x10)	/* FEC0_TXER / ULPI_DATA0 */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR5	(0x20)	/* FEC0_TXD1 / FEC0_RMII_TXD1 */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR6	(0x40)	/* FEC0_TXD2 / ULPI_DATA2 */
-+#define MCF_GPIO_PDDR_FEC0L_PDDR7	(0x80)	/* FEC0_TXD3 / ULPI_DATA3 */
-+
-+/* Bit definitions and macros for PDDR_SSI */
-+#define MCF_GPIO_PDDR_SSI_PDDR0		(0x01)	/* SSI_TXD / U1TXD */
-+#define MCF_GPIO_PDDR_SSI_PDDR1		(0x02)	/* SSI_RXD / U1RXD */
-+#define MCF_GPIO_PDDR_SSI_PDDR2		(0x04)	/* SSI_FS / U1RTS */
-+#define MCF_GPIO_PDDR_SSI_PDDR3		(0x08)	/* SSI_BCLK / U1CTS */
-+#define MCF_GPIO_PDDR_SSI_PDDR4		(0x10)	/* SSI_MCLK */
-+
-+/* Bit definitions and macros for PDDR_FBCTL */
-+#define MCF_GPIO_PDDR_FBCTL_PDDR0	(0x01)	/* FB_TS / FB_ALE / FB_TBST */
-+#define MCF_GPIO_PDDR_FBCTL_PDDR1	(0x02)	/* FB_RW */
-+#define MCF_GPIO_PDDR_FBCTL_PDDR2	(0x04)	/* FB_TA */
-+#define MCF_GPIO_PDDR_FBCTL_PDDR3	(0x08)	/* FB_OE */
-+
-+/* Bit definitions and macros for PDDR_BE */
-+#define MCF_GPIO_PDDR_BE_PDDR0		(0x01)	/* FB_BE/BWE0 / FB_SIZ0 */
-+#define MCF_GPIO_PDDR_BE_PDDR1		(0x02)	/* FB_BE/BWE1 / FB_SIZ1 */
-+#define MCF_GPIO_PDDR_BE_PDDR2		(0x04)	/* FB_BE/BWE2 / FB_SIZ2 */
-+#define MCF_GPIO_PDDR_BE_PDDR3		(0x08)	/* FB_BE/BWE3 / FB_SIZ3 */
-+
-+/* Bit definitions and macros for PDDR_CS */
-+#define MCF_GPIO_PDDR_CS_PDDR1		(0x02)	/* FB_CS1 */
-+#define MCF_GPIO_PDDR_CS_PDDR2		(0x04)	/* FB_CS2 */
-+#define MCF_GPIO_PDDR_CS_PDDR3		(0x08)	/* FB_CS3 */
-+
-+/* Bit definitions and macros for PDDR_DMA */
-+#define MCF_GPIO_PDDR_DMA_PDDR0		(0x01)	/* DREQ0 */
-+#define MCF_GPIO_PDDR_DMA_PDDR1		(0x02)	/* DACK0 / DSPI_PCS3 */
-+#define MCF_GPIO_PDDR_DMA_PDDR2		(0x04)	/* DREQ1 / USB_CLKIN */
-+#define MCF_GPIO_PDDR_DMA_PDDR3		(0x08)	/* DACK1 / ULPI_DIR */
-+
-+/* Bit definitions and macros for PDDR_FECI2C */
-+#define MCF_GPIO_PDDR_FECI2C_PDDR0	(0x01)	/* I2C_SDA / U2RXD */
-+#define MCF_GPIO_PDDR_FECI2C_PDDR1	(0x02)	/* I2C_SCL / U2TXD */
-+#define MCF_GPIO_PDDR_FECI2C_PDDR2	(0x04)	/* FEC0_MDIO */
-+#define MCF_GPIO_PDDR_FECI2C_PDDR3	(0x08)	/* FEC0_MDC */
-+#define MCF_GPIO_PDDR_FECI2C_PDDR4	(0x10)	/* FEC1_MDIO / ATA_DIOW */
-+#define MCF_GPIO_PDDR_FECI2C_PDDR5	(0x20)	/* FEC1_MDC / ATA_DIOR */
-+
-+/* Bit definitions and macros for PDDR_UART */
-+#define MCF_GPIO_PDDR_UART_PDDR0	(0x01)	/* U1TXD */
-+#define MCF_GPIO_PDDR_UART_PDDR1	(0x02)	/* U1RXD */
-+#define MCF_GPIO_PDDR_UART_PDDR2	(0x04)	/* U1RTS */
-+#define MCF_GPIO_PDDR_UART_PDDR3	(0x08)	/* U0CTS */
-+#define MCF_GPIO_PDDR_UART_PDDR4	(0x10)	/* U1TXD */
-+#define MCF_GPIO_PDDR_UART_PDDR5	(0x20)	/* U1RXD */
-+#define MCF_GPIO_PDDR_UART_PDDR6	(0x40)	/* U1RTS */
-+#define MCF_GPIO_PDDR_UART_PDDR7	(0x80)	/* U1CTS */
-+
-+/* Bit definitions and macros for PDDR_DSPI */
-+#define MCF_GPIO_PDDR_DSPI_PDDR0	(0x01)	/* DSPI_SOUT / SBF_DO */
-+#define MCF_GPIO_PDDR_DSPI_PDDR1	(0x02)	/* DSPI_SIN / SBF_DI */
-+#define MCF_GPIO_PDDR_DSPI_PDDR2	(0x04)	/* DSPI_SCK / SBF_CK */
-+#define MCF_GPIO_PDDR_DSPI_PDDR3	(0x08)	/* DSPI_PCS0/SS */
-+#define MCF_GPIO_PDDR_DSPI_PDDR4	(0x10)	/* DSPI_PCS1 / SBF_CS */
-+#define MCF_GPIO_PDDR_DSPI_PDDR5	(0x20)	/* DSPI_PCS2 */
-+#define MCF_GPIO_PDDR_DSPI_PDDR6	(0x40)	/* DSPI_PCS5/SS */
-+
-+/* Bit definitions and macros for PDDR_TIMER */
-+#define MCF_GPIO_PDDR_TIMER_PDDR0	(0x01)	/* T0IN / T0OUT / U2RTS */
-+#define MCF_GPIO_PDDR_TIMER_PDDR1	(0x02)	/* T1IN / T1OUT / U2CTS */
-+#define MCF_GPIO_PDDR_TIMER_PDDR2	(0x04)	/* T2IN / T2OUT / U2TXD */
-+#define MCF_GPIO_PDDR_TIMER_PDDR3	(0x08)	/* T3IN / T3OUT / U2RXD */
-+
-+/* Bit definitions and macros for PDDR_PCI */
-+#define MCF_GPIO_PDDR_PCI_PDDR0		(0x01)	/* PCI_REQ0/PCI_EXTGNT */
-+#define MCF_GPIO_PDDR_PCI_PDDR1		(0x02)	/* PCI_REQ1 */
-+#define MCF_GPIO_PDDR_PCI_PDDR2		(0x04)	/* PCI_REQ2 */
-+#define MCF_GPIO_PDDR_PCI_PDDR3		(0x08)	/* PCI_REQ3 / ATA_INTR */
-+#define MCF_GPIO_PDDR_PCI_PDDR4		(0x10)	/* PCI_GNT0/PCI_EXTREQ */
-+#define MCF_GPIO_PDDR_PCI_PDDR5		(0x20)	/* PCI_GNT1 /  */
-+#define MCF_GPIO_PDDR_PCI_PDDR6		(0x40)	/* PCI_GNT2 /  */
-+#define MCF_GPIO_PDDR_PCI_PDDR7		(0x80)	/* PCI_GNT3 / ATA_DMACK */
-+
-+/* Bit definitions and macros for PDDR_USB */
-+#define MCF_GPIO_PDDR_USB_PDDR0		(0x01)	/* USB_VBUS_OC / ULPI_STP */
-+#define MCF_GPIO_PDDR_USB_PDDR1		(0x02)	/* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */
-+
-+/* Bit definitions and macros for PDDR_ATAH */
-+#define MCF_GPIO_PDDR_ATAH_PDDR0	(0x01)	/* ATA_DA0 */
-+#define MCF_GPIO_PDDR_ATAH_PDDR1	(0x02)	/* ATA_DA1 */
-+#define MCF_GPIO_PDDR_ATAH_PDDR2	(0x04)	/* ATA_DA2 */
-+#define MCF_GPIO_PDDR_ATAH_PDDR3	(0x08)	/* ATA_CS0 */
-+#define MCF_GPIO_PDDR_ATAH_PDDR4	(0x10)	/* ATA_CS1 */
-+#define MCF_GPIO_PDDR_ATAH_PDDR5	(0x20)	/* ATA_BUFFER_EN */
-+
-+/* Bit definitions and macros for PDDR_ATAL */
-+#define MCF_GPIO_PDDR_ATAL_PDDR0	(0x01)	/* ATA_IORDY */
-+#define MCF_GPIO_PDDR_ATAL_PDDR1	(0x02)	/* ATA_DMARQ */
-+#define MCF_GPIO_PDDR_ATAL_PDDR2	(0x04)	/* ATA_RESET */
-+
-+/* Bit definitions and macros for PDDR_FEC1H */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR0	(0x01)	/* FEC1_CRS / ATA_DATA6 */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR1	(0x02)	/* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR2	(0x04)	/* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR3	(0x08)	/* FEC1_RXCLK / ATA_DATA5 */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR4	(0x10)	/* FEC1_COL / ATA_DATA7 */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR5	(0x20)	/* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR6	(0x40)	/* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */
-+#define MCF_GPIO_PDDR_FEC1H_PDDR7	(0x80)	/* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */
-+
-+/* Bit definitions and macros for PDDR_FEC1L */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR0	(0x01)	/* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR1	(0x02)	/* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR2	(0x04)	/* FEC1_RXD2 / ATA_DATA3 */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR3	(0x08)	/* FEC1_RXD3 / ATA_DATA4 */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR4	(0x10)	/* FEC1_TXER / ATA_DATA0 */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR5	(0x20)	/* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR6	(0x40)	/* FEC1_TXD2 / ATA_DATA1 */
-+#define MCF_GPIO_PDDR_FEC1L_PDDR7	(0x80)	/* FEC1_TXD3 / ATA_DATA2 */
-+
-+/* Bit definitions and macros for PDDR_FBADH */
-+#define MCF_GPIO_PDDR_FBADH_PDDR0	(0x01)	/* FB_AD24 */
-+#define MCF_GPIO_PDDR_FBADH_PDDR1	(0x02)	/* FB_AD25 */
-+#define MCF_GPIO_PDDR_FBADH_PDDR2	(0x04)	/* FB_AD26 */
-+#define MCF_GPIO_PDDR_FBADH_PDDR3	(0x08)	/* FB_AD27 */
-+#define MCF_GPIO_PDDR_FBADH_PDDR4	(0x10)	/* FB_AD28 */
-+#define MCF_GPIO_PDDR_FBADH_PDDR5	(0x20)	/* FB_AD29 */
-+#define MCF_GPIO_PDDR_FBADH_PDDR6	(0x40)	/* FB_AD30 */
-+#define MCF_GPIO_PDDR_FBADH_PDDR7	(0x80)	/* FB_AD31 */
-+
-+/* Bit definitions and macros for PDDR_FBADMH */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR0	(0x01)	/* FB_AD16 */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR1	(0x02)	/* FB_AD17 */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR2	(0x04)	/* FB_AD18 */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR3	(0x08)	/* FB_AD19 */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR4	(0x10)	/* FB_AD20 */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR5	(0x20)	/* FB_AD21 */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR6	(0x40)	/* FB_AD22 */
-+#define MCF_GPIO_PDDR_FBADMH_PDDR7	(0x80)	/* FB_AD23 */
-+
-+/* Bit definitions and macros for PDDR_FBADML */
-+#define MCF_GPIO_PDDR_FBADML_PDDR0	(0x01)	/* FB_AD8 */
-+#define MCF_GPIO_PDDR_FBADML_PDDR1	(0x02)	/* FB_AD9 */
-+#define MCF_GPIO_PDDR_FBADML_PDDR2	(0x04)	/* FB_AD10 */
-+#define MCF_GPIO_PDDR_FBADML_PDDR3	(0x08)	/* FB_AD11 */
-+#define MCF_GPIO_PDDR_FBADML_PDDR4	(0x10)	/* FB_AD12 */
-+#define MCF_GPIO_PDDR_FBADML_PDDR5	(0x20)	/* FB_AD13 */
-+#define MCF_GPIO_PDDR_FBADML_PDDR6	(0x40)	/* FB_AD14 */
-+#define MCF_GPIO_PDDR_FBADML_PDDR7	(0x80)	/* FB_AD15 */
-+
-+/* Bit definitions and macros for PDDR_FBADL */
-+#define MCF_GPIO_PDDR_FBADL_PDDR0	(0x01)	/* FB_AD0 */
-+#define MCF_GPIO_PDDR_FBADL_PDDR1	(0x02)	/* FB_AD1 */
-+#define MCF_GPIO_PDDR_FBADL_PDDR2	(0x04)	/* FB_AD2 */
-+#define MCF_GPIO_PDDR_FBADL_PDDR3	(0x08)	/* FB_AD3 */
-+#define MCF_GPIO_PDDR_FBADL_PDDR4	(0x10)	/* FB_AD4 */
-+#define MCF_GPIO_PDDR_FBADL_PDDR5	(0x20)	/* FB_AD5 */
-+#define MCF_GPIO_PDDR_FBADL_PDDR6	(0x40)	/* FB_AD6 */
-+#define MCF_GPIO_PDDR_FBADL_PDDR7	(0x80)	/* FB_AD7 */
-+
-+/* Bit definitions and macros for PPDSDR_FEC0H */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR0	(0x01)	/* FEC0_CRS / ULPI_DATA6 */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR1	(0x02)	/* FEC0_RXD0 / FEC0_RMII_RXD0 */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR2	(0x04)	/* FEC0_RXDV / FEC0_RMII_CRS_DV */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR3	(0x08)	/* FEC0_RXCLK / ULPI_DATA1 */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR4	(0x10)	/* FEC0_COL / ULPI_DATA7 */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR5	(0x20)	/* FEC0_TXD0 / FEC0_RMII_TXD0 */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR6	(0x40)	/* FEC0_TXEN / FEC0_RMII_TXEN */
-+#define MCF_GPIO_PPDSDR_FEC0H_PPDR7	(0x80)	/* FEC0_TXCLK / FEC0_RMII_REF_CLK */
-+
-+/* Bit definitions and macros for PPDSDR_FEC0L */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR0	(0x01)	/* FEC0_RXER / FEC0_RMII_RXER */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR1	(0x02)	/* FEC0_RXD1 / FEC0_RMII_RXD1 */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR2	(0x04)	/* FEC0_RXD2 / ULPI_DATA4 */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR3	(0x08)	/* FEC0_RXD3 / ULPI_DATA5 */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR4	(0x10)	/* FEC0_TXER / ULPI_DATA0 */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR5	(0x20)	/* FEC0_TXD1 / FEC0_RMII_TXD1 */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR6	(0x40)	/* FEC0_TXD2 / ULPI_DATA2 */
-+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR7	(0x80)	/* FEC0_TXD3 / ULPI_DATA3 */
-+
-+/* Bit definitions and macros for PPDSDR_SSI */
-+#define MCF_GPIO_PPDSDR_SSI_PPDR0	(0x01)	/* SSI_TXD / U1TXD */
-+#define MCF_GPIO_PPDSDR_SSI_PPDR1	(0x02)	/* SSI_RXD / U1RXD */
-+#define MCF_GPIO_PPDSDR_SSI_PPDR2	(0x04)	/* SSI_FS / U1RTS */
-+#define MCF_GPIO_PPDSDR_SSI_PPDR3	(0x08)	/* SSI_BCLK / U1CTS */
-+#define MCF_GPIO_PPDSDR_SSI_PPDR4	(0x10)	/* SSI_MCLK */
-+
-+/* Bit definitions and macros for PPDSDR_FBCTL */
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDR0	(0x01)	/* FB_TS / FB_ALE / FB_TBST */
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDR1	(0x02)	/* FB_RW */
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDR2	(0x04)	/* FB_TA */
-+#define MCF_GPIO_PPDSDR_FBCTL_PPDR3	(0x08)	/* FB_OE */
-+
-+/* Bit definitions and macros for PPDSDR_BE */
-+#define MCF_GPIO_PPDSDR_BE_PPDR0	(0x01)	/* FB_BE/BWE0 / FB_SIZ0 */
-+#define MCF_GPIO_PPDSDR_BE_PPDR1	(0x02)	/* FB_BE/BWE1 / FB_SIZ1 */
-+#define MCF_GPIO_PPDSDR_BE_PPDR2	(0x04)	/* FB_BE/BWE2 / FB_SIZ2 */
-+#define MCF_GPIO_PPDSDR_BE_PPDR3	(0x08)	/* FB_BE/BWE3 / FB_SIZ3 */
-+
-+/* Bit definitions and macros for PPDSDR_CS */
-+#define MCF_GPIO_PPDSDR_CS_PPDR1	(0x02)	/* FB_CS1 */
-+#define MCF_GPIO_PPDSDR_CS_PPDR2	(0x04)	/* FB_CS2 */
-+#define MCF_GPIO_PPDSDR_CS_PPDR3	(0x08)	/* FB_CS3 */
-+
-+/* Bit definitions and macros for PPDSDR_DMA */
-+#define MCF_GPIO_PPDSDR_DMA_PPDR0	(0x01)	/* DREQ0 */
-+#define MCF_GPIO_PPDSDR_DMA_PPDR1	(0x02)	/* DACK0 / DSPI_PCS3 */
-+#define MCF_GPIO_PPDSDR_DMA_PPDR2	(0x04)	/* DREQ1 / USB_CLKIN */
-+#define MCF_GPIO_PPDSDR_DMA_PPDR3	(0x08)	/* DACK1 / ULPI_DIR */
-+
-+/* Bit definitions and macros for PPDSDR_FECI2C */
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDR0	(0x01)	/* I2C_SDA / U2RXD */
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDR1	(0x02)	/* I2C_SCL / U2TXD */
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDR2	(0x04)	/* FEC0_MDIO */
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDR3	(0x08)	/* FEC0_MDC */
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDR4	(0x10)	/* FEC1_MDIO / ATA_DIOW */
-+#define MCF_GPIO_PPDSDR_FECI2C_PPDR5	(0x20)	/* FEC1_MDC / ATA_DIOR */
-+
-+/* Bit definitions and macros for PPDSDR_UART */
-+#define MCF_GPIO_PPDSDR_UART_PPDR0	(0x01)	/* U1TXD */
-+#define MCF_GPIO_PPDSDR_UART_PPDR1	(0x02)	/* U1RXD */
-+#define MCF_GPIO_PPDSDR_UART_PPDR2	(0x04)	/* U1RTS */
-+#define MCF_GPIO_PPDSDR_UART_PPDR3	(0x08)	/* U0CTS */
-+#define MCF_GPIO_PPDSDR_UART_PPDR4	(0x10)	/* U1TXD */
-+#define MCF_GPIO_PPDSDR_UART_PPDR5	(0x20)	/* U1RXD */
-+#define MCF_GPIO_PPDSDR_UART_PPDR6	(0x40)	/* U1RTS */
-+#define MCF_GPIO_PPDSDR_UART_PPDR7	(0x80)	/* U1CTS */
-+
-+/* Bit definitions and macros for PPDSDR_DSPI */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDR0	(0x01)	/* DSPI_SOUT / SBF_DO */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDR1	(0x02)	/* DSPI_SIN / SBF_DI */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDR2	(0x04)	/* DSPI_SCK / SBF_CK */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDR3	(0x08)	/* DSPI_PCS0/SS */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDR4	(0x10)	/* DSPI_PCS1 / SBF_CS */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDR5	(0x20)	/* DSPI_PCS2 */
-+#define MCF_GPIO_PPDSDR_DSPI_PPDR6	(0x40)	/* DSPI_PCS5/SS */
-+
-+/* Bit definitions and macros for PPDSDR_TIMER */
-+#define MCF_GPIO_PPDSDR_TIMER_PPDR0	(0x01)	/* T0IN / T0OUT / U2RTS */
-+#define MCF_GPIO_PPDSDR_TIMER_PPDR1	(0x02)	/* T1IN / T1OUT / U2CTS */
-+#define MCF_GPIO_PPDSDR_TIMER_PPDR2	(0x04)	/* T2IN / T2OUT / U2TXD */
-+#define MCF_GPIO_PPDSDR_TIMER_PPDR3	(0x08)	/* T3IN / T3OUT / U2RXD */
-+
-+/* Bit definitions and macros for PPDSDR_PCI */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR0	(0x01)	/* PCI_REQ0/PCI_EXTGNT */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR1	(0x02)	/* PCI_REQ1 */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR2	(0x04)	/* PCI_REQ2 */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR3	(0x08)	/* PCI_REQ3 / ATA_INTR */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR4	(0x10)	/* PCI_GNT0/PCI_EXTREQ */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR5	(0x20)	/* PCI_GNT1 /  */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR6	(0x40)	/* PCI_GNT2 /  */
-+#define MCF_GPIO_PPDSDR_PCI_PPDR7	(0x80)	/* PCI_GNT3 / ATA_DMACK */
-+
-+/* Bit definitions and macros for PPDSDR_USB */
-+#define MCF_GPIO_PPDSDR_USB_PPDR0	(0x01)	/* USB_VBUS_OC / ULPI_STP */
-+#define MCF_GPIO_PPDSDR_USB_PPDR1	(0x02)	/* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */
-+
-+/* Bit definitions and macros for PPDSDR_ATAH */
-+#define MCF_GPIO_PPDSDR_ATAH_PPDR0	(0x01)	/* ATA_DA0 */
-+#define MCF_GPIO_PPDSDR_ATAH_PPDR1	(0x02)	/* ATA_DA1 */
-+#define MCF_GPIO_PPDSDR_ATAH_PPDR2	(0x04)	/* ATA_DA2 */
-+#define MCF_GPIO_PPDSDR_ATAH_PPDR3	(0x08)	/* ATA_CS0 */
-+#define MCF_GPIO_PPDSDR_ATAH_PPDR4	(0x10)	/* ATA_CS1 */
-+#define MCF_GPIO_PPDSDR_ATAH_PPDR5	(0x20)	/* ATA_BUFFER_EN */
-+
-+/* Bit definitions and macros for PPDSDR_ATAL */
-+#define MCF_GPIO_PPDSDR_ATAL_PPDR0	(0x01)	/* ATA_IORDY */
-+#define MCF_GPIO_PPDSDR_ATAL_PPDR1	(0x02)	/* ATA_DMARQ */
-+#define MCF_GPIO_PPDSDR_ATAL_PPDR2	(0x04)	/* ATA_RESET */
-+
-+/* Bit definitions and macros for PPDSDR_FEC1H */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR0	(0x01)	/* FEC1_CRS / ATA_DATA6 */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR1	(0x02)	/* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR2	(0x04)	/* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR3	(0x08)	/* FEC1_RXCLK / ATA_DATA5 */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR4	(0x10)	/* FEC1_COL / ATA_DATA7 */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR5	(0x20)	/* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR6	(0x40)	/* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */
-+#define MCF_GPIO_PPDSDR_FEC1H_PPDR7	(0x80)	/* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */
-+
-+/* Bit definitions and macros for PPDSDR_FEC1L */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR0	(0x01)	/* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR1	(0x02)	/* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR2	(0x04)	/* FEC1_RXD2 / ATA_DATA3 */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR3	(0x08)	/* FEC1_RXD3 / ATA_DATA4 */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR4	(0x10)	/* FEC1_TXER / ATA_DATA0 */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR5	(0x20)	/* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR6	(0x40)	/* FEC1_TXD2 / ATA_DATA1 */
-+#define MCF_GPIO_PPDSDR_FEC1L_PPDR7	(0x80)	/* FEC1_TXD3 / ATA_DATA2 */
-+
-+/* Bit definitions and macros for PPDSDR_FBADH */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR0	(0x01)	/* FB_AD24 */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR1	(0x02)	/* FB_AD25 */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR2	(0x04)	/* FB_AD26 */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR3	(0x08)	/* FB_AD27 */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR4	(0x10)	/* FB_AD28 */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR5	(0x20)	/* FB_AD29 */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR6	(0x40)	/* FB_AD30 */
-+#define MCF_GPIO_PPDSDR_FBADH_PPDR7	(0x80)	/* FB_AD31 */
-+
-+/* Bit definitions and macros for PPDSDR_FBADMH */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR0	(0x01)	/* FB_AD16 */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR1	(0x02)	/* FB_AD17 */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR2	(0x04)	/* FB_AD18 */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR3	(0x08)	/* FB_AD19 */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR4	(0x10)	/* FB_AD20 */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR5	(0x20)	/* FB_AD21 */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR6	(0x40)	/* FB_AD22 */
-+#define MCF_GPIO_PPDSDR_FBADMH_PPDR7	(0x80)	/* FB_AD23 */
-+
-+/* Bit definitions and macros for PPDSDR_FBADML */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR0	(0x01)	/* FB_AD8 */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR1	(0x02)	/* FB_AD9 */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR2	(0x04)	/* FB_AD10 */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR3	(0x08)	/* FB_AD11 */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR4	(0x10)	/* FB_AD12 */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR5	(0x20)	/* FB_AD13 */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR6	(0x40)	/* FB_AD14 */
-+#define MCF_GPIO_PPDSDR_FBADML_PPDR7	(0x80)	/* FB_AD15 */
-+
-+/* Bit definitions and macros for PPDSDR_FBADL */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR0	(0x01)	/* FB_AD0 */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR1	(0x02)	/* FB_AD1 */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR2	(0x04)	/* FB_AD2 */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR3	(0x08)	/* FB_AD3 */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR4	(0x10)	/* FB_AD4 */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR5	(0x20)	/* FB_AD5 */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR6	(0x40)	/* FB_AD6 */
-+#define MCF_GPIO_PPDSDR_FBADL_PPDR7	(0x80)	/* FB_AD7 */
-+
-+/* Bit definitions and macros for PCLRR_FEC0H */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR0	(0x01)	/* FEC0_CRS / ULPI_DATA6 */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR1	(0x02)	/* FEC0_RXD0 / FEC0_RMII_RXD0 */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR2	(0x04)	/* FEC0_RXDV/FEC0_RMII_CRS_DV */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR3	(0x08)	/* FEC0_RXCLK / ULPI_DATA1 */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR4	(0x10)	/* FEC0_COL / ULPI_DATA7 */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR5	(0x20)	/* FEC0_TXD0 / FEC0_RMII_TXD0 */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR6	(0x40)	/* FEC0_TXEN / FEC0_RMII_TXEN */
-+#define MCF_GPIO_PCLRR_FEC0H_PCLRR7	(0x80)	/* FEC0_TXCLK / FEC0_RMII_REF_CLK */
-+
-+/* Bit definitions and macros for PCLRR_FEC0L */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR0	(0x01)	/* FEC0_RXER / FEC0_RMII_RXER */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR1	(0x02)	/* FEC0_RXD1 / FEC0_RMII_RXD1 */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR2	(0x04)	/* FEC0_RXD2 / ULPI_DATA4 */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR3	(0x08)	/* FEC0_RXD3 / ULPI_DATA5 */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR4	(0x10)	/* FEC0_TXER / ULPI_DATA0 */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR5	(0x20)	/* FEC0_TXD1 / FEC0_RMII_TXD1 */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR6	(0x40)	/* FEC0_TXD2 / ULPI_DATA2 */
-+#define MCF_GPIO_PCLRR_FEC0L_PPDR7	(0x80)	/* FEC0_TXD3 / ULPI_DATA3 */
-+
-+/* Bit definitions and macros for PCLRR_SSI */
-+#define MCF_GPIO_PCLRR_SSI_PCLRR0	(0x01)	/* SSI_TXD / U1TXD */
-+#define MCF_GPIO_PCLRR_SSI_PCLRR1	(0x02)	/* SSI_RXD / U1RXD */
-+#define MCF_GPIO_PCLRR_SSI_PCLRR2	(0x04)	/* SSI_FS / U1RTS */
-+#define MCF_GPIO_PCLRR_SSI_PCLRR3	(0x08)	/* SSI_BCLK / U1CTS */
-+#define MCF_GPIO_PCLRR_SSI_PCLRR4	(0x10)	/* SSI_MCLK */
-+
-+/* Bit definitions and macros for PCLRR_FBCTL */
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRR0	(0x01)	/* FB_TS / FB_ALE / FB_TBST */
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRR1	(0x02)	/* FB_RW */
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRR2	(0x04)	/* FB_TA */
-+#define MCF_GPIO_PCLRR_FBCTL_PCLRR3	(0x08)	/* FB_OE */
-+
-+/* Bit definitions and macros for PCLRR_BE */
-+#define MCF_GPIO_PCLRR_BE_PCLRR0	(0x01)	/* FB_BE/BWE0 / FB_SIZ0 */
-+#define MCF_GPIO_PCLRR_BE_PCLRR1	(0x02)	/* FB_BE/BWE1 / FB_SIZ1 */
-+#define MCF_GPIO_PCLRR_BE_PCLRR2	(0x04)	/* FB_BE/BWE2 / FB_SIZ2 */
-+#define MCF_GPIO_PCLRR_BE_PCLRR3	(0x08)	/* FB_BE/BWE3 / FB_SIZ3 */
-+
-+/* Bit definitions and macros for PCLRR_CS */
-+#define MCF_GPIO_PCLRR_CS_PCLRR1	(0x02)	/* FB_CS1 */
-+#define MCF_GPIO_PCLRR_CS_PCLRR2	(0x04)	/* FB_CS2 */
-+#define MCF_GPIO_PCLRR_CS_PCLRR3	(0x08)	/* FB_CS3 */
-+
-+/* Bit definitions and macros for PCLRR_DMA */
-+#define MCF_GPIO_PCLRR_DMA_PCLRR0	(0x01)	/* DREQ0 */
-+#define MCF_GPIO_PCLRR_DMA_PCLRR1	(0x02)	/* DACK0 / DSPI_PCS3 */
-+#define MCF_GPIO_PCLRR_DMA_PCLRR2	(0x04)	/* DREQ1 / USB_CLKIN */
-+#define MCF_GPIO_PCLRR_DMA_PCLRR3	(0x08)	/* DACK1 / ULPI_DIR */
-+
-+/* Bit definitions and macros for PCLRR_FECI2C */
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRR0	(0x01)	/* I2C_SDA / U2RXD */
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRR1	(0x02)	/* I2C_SCL / U2TXD */
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRR2	(0x04)	/* FEC0_MDIO */
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRR3	(0x08)	/* FEC0_MDC */
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRR4	(0x10)	/* FEC1_MDIO / ATA_DIOW */
-+#define MCF_GPIO_PCLRR_FECI2C_PCLRR5	(0x20)	/* FEC1_MDC / ATA_DIOR */
-+
-+/* Bit definitions and macros for PCLRR_UART */
-+#define MCF_GPIO_PCLRR_UART_PCLRR0	(0x01)	/* U1TXD */
-+#define MCF_GPIO_PCLRR_UART_PCLRR1	(0x02)	/* U1RXD */
-+#define MCF_GPIO_PCLRR_UART_PCLRR2	(0x04)	/* U1RTS */
-+#define MCF_GPIO_PCLRR_UART_PCLRR3	(0x08)	/* U0CTS */
-+#define MCF_GPIO_PCLRR_UART_PCLRR4	(0x10)	/* U1TXD */
-+#define MCF_GPIO_PCLRR_UART_PCLRR5	(0x20)	/* U1RXD */
-+#define MCF_GPIO_PCLRR_UART_PCLRR6	(0x40)	/* U1RTS */
-+#define MCF_GPIO_PCLRR_UART_PCLRR7	(0x80)	/* U1CTS */
-+
-+/* Bit definitions and macros for PCLRR_DSPI */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRR0	(0x01)	/* DSPI_SOUT / SBF_DO */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRR1	(0x02)	/* DSPI_SIN / SBF_DI */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRR2	(0x04)	/* DSPI_SCK / SBF_CK */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRR3	(0x08)	/* DSPI_PCS0/SS */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRR4	(0x10)	/* DSPI_PCS1 / SBF_CS */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRR5	(0x20)	/* DSPI_PCS2 */
-+#define MCF_GPIO_PCLRR_DSPI_PCLRR6	(0x40)	/* DSPI_PCS5/SS */
-+
-+/* Bit definitions and macros for PCLRR_TIMER */
-+#define MCF_GPIO_PCLRR_TIMER_PCLRR0	(0x01)	/* T0IN / T0OUT / U2RTS */
-+#define MCF_GPIO_PCLRR_TIMER_PCLRR1	(0x02)	/* T1IN / T1OUT / U2CTS */
-+#define MCF_GPIO_PCLRR_TIMER_PCLRR2	(0x04)	/* T2IN / T2OUT / U2TXD */
-+#define MCF_GPIO_PCLRR_TIMER_PCLRR3	(0x08)	/* T3IN / T3OUT / U2RXD */
-+
-+/* Bit definitions and macros for PCLRR_PCI */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR0	(0x01)	/* PCI_REQ0/PCI_EXTGNT */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR1	(0x02)	/* PCI_REQ1 */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR2	(0x04)	/* PCI_REQ2 */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR3	(0x08)	/* PCI_REQ3 / ATA_INTR */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR4	(0x10)	/* PCI_GNT0/PCI_EXTREQ */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR5	(0x20)	/* PCI_GNT1 /  */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR6	(0x40)	/* PCI_GNT2 /  */
-+#define MCF_GPIO_PCLRR_PCI_PCLRR7	(0x80)	/* PCI_GNT3 / ATA_DMACK */
-+
-+/* Bit definitions and macros for PCLRR_USB */
-+#define MCF_GPIO_PCLRR_USB_PCLRR0	(0x01)	/* USB_VBUS_OC / ULPI_STP */
-+#define MCF_GPIO_PCLRR_USB_PCLRR1	(0x02)	/* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */
-+
-+/* Bit definitions and macros for PCLRR_ATAH */
-+#define MCF_GPIO_PCLRR_ATAH_PCLRR0	(0x01)	/* ATA_DA0 */
-+#define MCF_GPIO_PCLRR_ATAH_PCLRR1	(0x02)	/* ATA_DA1 */
-+#define MCF_GPIO_PCLRR_ATAH_PCLRR2	(0x04)	/* ATA_DA2 */
-+#define MCF_GPIO_PCLRR_ATAH_PCLRR3	(0x08)	/* ATA_CS0 */
-+#define MCF_GPIO_PCLRR_ATAH_PCLRR4	(0x10)	/* ATA_CS1 */
-+#define MCF_GPIO_PCLRR_ATAH_PCLRR5	(0x20)	/* ATA_BUFFER_EN */
-+
-+/* Bit definitions and macros for PCLRR_ATAL */
-+#define MCF_GPIO_PCLRR_ATAL_PCLRR0	(0x01)	/* ATA_IORDY */
-+#define MCF_GPIO_PCLRR_ATAL_PCLRR1	(0x02)	/* ATA_DMARQ */
-+#define MCF_GPIO_PCLRR_ATAL_PCLRR2	(0x04)	/* ATA_RESET */
-+
-+/* Bit definitions and macros for PCLRR_FEC1H */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR0	(0x01)	/* FEC1_CRS / ATA_DATA6 */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR1	(0x02)	/* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR2	(0x04)	/* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR3	(0x08)	/* FEC1_RXCLK / ATA_DATA5 */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR4	(0x10)	/* FEC1_COL / ATA_DATA7 */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR5	(0x20)	/* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR6	(0x40)	/* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */
-+#define MCF_GPIO_PCLRR_FEC1H_PCLRR7	(0x80)	/* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */
-+
-+/* Bit definitions and macros for PCLRR_FEC1L */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR0	(0x01)	/* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR1	(0x02)	/* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR2	(0x04)	/* FEC1_RXD2 / ATA_DATA3 */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR3	(0x08)	/* FEC1_RXD3 / ATA_DATA4 */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR4	(0x10)	/* FEC1_TXER / ATA_DATA0 */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR5	(0x20)	/* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR6	(0x40)	/* FEC1_TXD2 / ATA_DATA1 */
-+#define MCF_GPIO_PCLRR_FEC1L_PCLRR7	(0x80)	/* FEC1_TXD3 / ATA_DATA2 */
-+
-+/* Bit definitions and macros for PCLRR_FBADH */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR0	(0x01)	/* FB_AD24 */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR1	(0x02)	/* FB_AD25 */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR2	(0x04)	/* FB_AD26 */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR3	(0x08)	/* FB_AD27 */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR4	(0x10)	/* FB_AD28 */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR5	(0x20)	/* FB_AD29 */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR6	(0x40)	/* FB_AD30 */
-+#define MCF_GPIO_PCLRR_FBADH_PCLRR7	(0x80)	/* FB_AD31 */
-+
-+/* Bit definitions and macros for PCLRR_FBADMH */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR0	(0x01)	/* FB_AD16 */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR1	(0x02)	/* FB_AD17 */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR2	(0x04)	/* FB_AD18 */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR3	(0x08)	/* FB_AD19 */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR4	(0x10)	/* FB_AD20 */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR5	(0x20)	/* FB_AD21 */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR6	(0x40)	/* FB_AD22 */
-+#define MCF_GPIO_PCLRR_FBADMH_PCLRR7	(0x80)	/* FB_AD23 */
-+
-+/* Bit definitions and macros for PCLRR_FBADML */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR0	(0x01)	/* FB_AD8 */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR1	(0x02)	/* FB_AD9 */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR2	(0x04)	/* FB_AD10 */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR3	(0x08)	/* FB_AD11 */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR4	(0x10)	/* FB_AD12 */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR5	(0x20)	/* FB_AD13 */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR6	(0x40)	/* FB_AD14 */
-+#define MCF_GPIO_PCLRR_FBADML_PCLRR7	(0x80)	/* FB_AD15 */
-+
-+/* Bit definitions and macros for PCLRR_FBADL */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR0	(0x01)	/* FB_AD0 */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR1	(0x02)	/* FB_AD1 */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR2	(0x04)	/* FB_AD2 */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR3	(0x08)	/* FB_AD3 */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR4	(0x10)	/* FB_AD4 */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR5	(0x20)	/* FB_AD5 */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR6	(0x40)	/* FB_AD6 */
-+#define MCF_GPIO_PCLRR_FBADL_PCLRR7	(0x80)	/* FB_AD7 */
-+
-+/* Bit definitions and macros for PAR_FEC */
-+#define MCF_GPIO_PAR_FEC_FEC0(x)	(((x)&0x07))
-+#define MCF_GPIO_PAR_FEC_FEC1(x)	(((x)&0x07)<<4)
-+#define MCF_GPIO_PAR_FEC_FEC1_MASK	(0x8F)
-+#define MCF_GPIO_PAR_FEC_FEC1_MII	(0x70)
-+#define MCF_GPIO_PAR_FEC_FEC1_RMII_GPIO	(0x30)
-+#define MCF_GPIO_PAR_FEC_FEC1_RMII_ATA	(0x20)
-+#define MCF_GPIO_PAR_FEC_FEC1_ATA	(0x10)
-+#define MCF_GPIO_PAR_FEC_FEC1_GPIO	(0x00)
-+#define MCF_GPIO_PAR_FEC_FEC0_MASK	(0xF8)
-+#define MCF_GPIO_PAR_FEC_FEC0_MII	(0x07)
-+#define MCF_GPIO_PAR_FEC_FEC0_RMII_GPIO	(0x03)
-+#define MCF_GPIO_PAR_FEC_FEC0_RMII_ULPI	(0x02)
-+#define MCF_GPIO_PAR_FEC_FEC0_ULPI	(0x01)
-+#define MCF_GPIO_PAR_FEC_FEC0_GPIO	(0x00)
-+
-+/* Bit definitions and macros for PAR_DMA */
-+#define MCF_GPIO_PAR_DMA_DREQ0		(0x01)
-+#define MCF_GPIO_PAR_DMA_DACK0(x)	(((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_DMA_DREQ1(x)	(((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_DMA_DACK1(x)	(((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_DMA_DACK1_MASK	(0x3F)
-+#define MCF_GPIO_PAR_DMA_DACK1_DACK1	(0xC0)
-+#define MCF_GPIO_PAR_DMA_DACK1_ULPI_DIR	(0x40)
-+#define MCF_GPIO_PAR_DMA_DACK1_GPIO	(0x00)
-+#define MCF_GPIO_PAR_DMA_DREQ1_MASK	(0xCF)
-+#define MCF_GPIO_PAR_DMA_DREQ1_DREQ1	(0x30)
-+#define MCF_GPIO_PAR_DMA_DREQ1_USB_CLKIN (0x10)
-+#define MCF_GPIO_PAR_DMA_DREQ1_GPIO	(0x00)
-+#define MCF_GPIO_PAR_DMA_DACK0_MASK	(0xF3)
-+#define MCF_GPIO_PAR_DMA_DACK0_DACK1	(0x0C)
-+#define MCF_GPIO_PAR_DMA_DACK0_ULPI_DIR	(0x04)
-+#define MCF_GPIO_PAR_DMA_DACK0_GPIO	(0x00)
-+#define MCF_GPIO_PAR_DMA_DREQ0_DREQ0	(0x01)
-+#define MCF_GPIO_PAR_DMA_DREQ0_GPIO	(0x00)
-+
-+/* Bit definitions and macros for PAR_FBCTL */
-+#define MCF_GPIO_PAR_FBCTL_TS(x)	(((x)&0x03)<<3)
-+#define MCF_GPIO_PAR_FBCTL_RW		(0x20)
-+#define MCF_GPIO_PAR_FBCTL_TA		(0x40)
-+#define MCF_GPIO_PAR_FBCTL_OE		(0x80)
-+#define MCF_GPIO_PAR_FBCTL_OE_OE	(0x80)
-+#define MCF_GPIO_PAR_FBCTL_OE_GPIO	(0x00)
-+#define MCF_GPIO_PAR_FBCTL_TA_TA	(0x40)
-+#define MCF_GPIO_PAR_FBCTL_TA_GPIO	(0x00)
-+#define MCF_GPIO_PAR_FBCTL_RW_RW	(0x20)
-+#define MCF_GPIO_PAR_FBCTL_RW_GPIO	(0x00)
-+#define MCF_GPIO_PAR_FBCTL_TS_MASK	(0xE7)
-+#define MCF_GPIO_PAR_FBCTL_TS_TS	(0x18)
-+#define MCF_GPIO_PAR_FBCTL_TS_ALE	(0x10)
-+#define MCF_GPIO_PAR_FBCTL_TS_TBST	(0x08)
-+#define MCF_GPIO_PAR_FBCTL_TS_GPIO	(0x80)
-+
-+/* Bit definitions and macros for PAR_DSPI */
-+#define MCF_GPIO_PAR_DSPI_SCK		(0x01)
-+#define MCF_GPIO_PAR_DSPI_SOUT		(0x02)
-+#define MCF_GPIO_PAR_DSPI_SIN		(0x04)
-+#define MCF_GPIO_PAR_DSPI_PCS0		(0x08)
-+#define MCF_GPIO_PAR_DSPI_PCS1		(0x10)
-+#define MCF_GPIO_PAR_DSPI_PCS2		(0x20)
-+#define MCF_GPIO_PAR_DSPI_PCS5		(0x40)
-+#define MCF_GPIO_PAR_DSPI_PCS5_PCS5	(0x40)
-+#define MCF_GPIO_PAR_DSPI_PCS5_GPIO	(0x00)
-+#define MCF_GPIO_PAR_DSPI_PCS2_PCS2	(0x20)
-+#define MCF_GPIO_PAR_DSPI_PCS2_GPIO	(0x00)
-+#define MCF_GPIO_PAR_DSPI_PCS1_PCS1	(0x10)
-+#define MCF_GPIO_PAR_DSPI_PCS1_GPIO	(0x00)
-+#define MCF_GPIO_PAR_DSPI_PCS0_PCS0	(0x08)
-+#define MCF_GPIO_PAR_DSPI_PCS0_GPIO	(0x00)
-+#define MCF_GPIO_PAR_DSPI_SIN_SIN	(0x04)
-+#define MCF_GPIO_PAR_DSPI_SIN_GPIO	(0x00)
-+#define MCF_GPIO_PAR_DSPI_SOUT_SOUT	(0x02)
-+#define MCF_GPIO_PAR_DSPI_SOUT_GPIO	(0x00)
-+#define MCF_GPIO_PAR_DSPI_SCK_SCK	(0x01)
-+#define MCF_GPIO_PAR_DSPI_SCK_GPIO	(0x00)
-+
-+/* Bit definitions and macros for PAR_BE */
-+#define MCF_GPIO_PAR_BE_BE0		(0x01)
-+#define MCF_GPIO_PAR_BE_BE1		(0x04)
-+#define MCF_GPIO_PAR_BE_BE2(x)		(((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_BE_BE3(x)		(((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_BE_BE3_MASK	(0x3F)
-+#define MCF_GPIO_PAR_BE_BE3_BE3		(0xC0)
-+#define MCF_GPIO_PAR_BE_BE3_TSIZ1	(0x80)
-+#define MCF_GPIO_PAR_BE_BE3_GPIO	(0x00)
-+#define MCF_GPIO_PAR_BE_BE2_MASK	(0xCF)
-+#define MCF_GPIO_PAR_BE_BE2_BE2		(0x30)
-+#define MCF_GPIO_PAR_BE_BE2_TSIZ0	(0x20)
-+#define MCF_GPIO_PAR_BE_BE2_GPIO	(0x00)
-+#define MCF_GPIO_PAR_BE_BE1_BE1		(0x04)
-+#define MCF_GPIO_PAR_BE_BE1_GPIO	(0x00)
-+#define MCF_GPIO_PAR_BE_BE0_BE0		(0x01)
-+#define MCF_GPIO_PAR_BE_BE0_GPIO	(0x00)
-+
-+/* Bit definitions and macros for PAR_CS */
-+#define MCF_GPIO_PAR_CS_CS1		(0x02)
-+#define MCF_GPIO_PAR_CS_CS2		(0x04)
-+#define MCF_GPIO_PAR_CS_CS3		(0x08)
-+#define MCF_GPIO_PAR_CS_CS3_CS3		(0x08)
-+#define MCF_GPIO_PAR_CS_CS3_GPIO	(0x00)
-+#define MCF_GPIO_PAR_CS_CS2_CS2		(0x04)
-+#define MCF_GPIO_PAR_CS_CS2_GPIO	(0x00)
-+#define MCF_GPIO_PAR_CS_CS1_CS1		(0x02)
-+#define MCF_GPIO_PAR_CS_CS1_GPIO	(0x00)
-+
-+/* Bit definitions and macros for PAR_TIMER */
-+#define MCF_GPIO_PAR_TIMER_T0IN(x)	(((x)&0x03))
-+#define MCF_GPIO_PAR_TIMER_T1IN(x)	(((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_TIMER_T2IN(x)	(((x)&0x03)<<4)
-+#define MCF_GPIO_PAR_TIMER_T3IN(x)	(((x)&0x03)<<6)
-+#define MCF_GPIO_PAR_TIMER_T3IN_MASK	(0x3F)
-+#define MCF_GPIO_PAR_TIMER_T3IN_T3IN	(0xC0)
-+#define MCF_GPIO_PAR_TIMER_T3IN_T3OUT	(0x80)
-+#define MCF_GPIO_PAR_TIMER_T3IN_U2RXD	(0x40)
-+#define MCF_GPIO_PAR_TIMER_T3IN_GPIO	(0x00)
-+#define MCF_GPIO_PAR_TIMER_T2IN_MASK	(0xCF)
-+#define MCF_GPIO_PAR_TIMER_T2IN_T2IN	(0x30)
-+#define MCF_GPIO_PAR_TIMER_T2IN_T2OUT	(0x20)
-+#define MCF_GPIO_PAR_TIMER_T2IN_U2TXD	(0x10)
-+#define MCF_GPIO_PAR_TIMER_T2IN_GPIO	(0x00)
-+#define MCF_GPIO_PAR_TIMER_T1IN_MASK	(0xF3)
-+#define MCF_GPIO_PAR_TIMER_T1IN_T1IN	(0x0C)
-+#define MCF_GPIO_PAR_TIMER_T1IN_T1OUT	(0x08)
-+#define MCF_GPIO_PAR_TIMER_T1IN_U2CTS	(0x04)
-+#define MCF_GPIO_PAR_TIMER_T1IN_GPIO	(0x00)
-+#define MCF_GPIO_PAR_TIMER_T0IN_MASK	(0xFC)
-+#define MCF_GPIO_PAR_TIMER_T0IN_T0IN	(0x03)
-+#define MCF_GPIO_PAR_TIMER_T0IN_T0OUT	(0x02)
-+#define MCF_GPIO_PAR_TIMER_T0IN_U2RTS	(0x01)
-+#define MCF_GPIO_PAR_TIMER_T0IN_GPIO	(0x00)
-+
-+/* Bit definitions and macros for PAR_USB */
-+#define MCF_GPIO_PAR_USB_VBUSOC(x)		(((x)&0x03))
-+#define MCF_GPIO_PAR_USB_VBUSEN(x)		(((x)&0x03)<<2)
-+#define MCF_GPIO_PAR_USB_VBUSEN_MASK		(0xF3)
-+#define MCF_GPIO_PAR_USB_VBUSEN_VBUSEN		(0x0C)
-+#define MCF_GPIO_PAR_USB_VBUSEN_USBPULLUP	(0x08)
-+#define MCF_GPIO_PAR_USB_VBUSEN_ULPI_NXT	(0x04)
-+#define MCF_GPIO_PAR_USB_VBUSEN_GPIO		(0x00)
-+#define MCF_GPIO_PAR_USB_VBUSOC_MASK		(0xFC)
-+#define MCF_GPIO_PAR_USB_VBUSOC_VBUSOC		(0x03)
-+#define MCF_GPIO_PAR_USB_VBUSOC_ULPI_STP	(0x01)
-+#define MCF_GPIO_PAR_USB_VBUSOC_GPIO		(0x00)
-+
-+/* Bit definitions and macros for PAR_UART */
-+#define MCF_GPIO_PAR_UART_U0TXD		(0x01)
-+#define MCF_GPIO_PAR_UART_U0RXD		(0x02)
-+#define MCF_GPIO_PAR_UART_U0RTS		(0x04)
-+#define MCF_GPIO_PAR_UART_U0CTS		(0x08)
-+#define MCF_GPIO_PAR_UART_U1TXD		(0x10)
-+#define MCF_GPIO_PAR_UART_U1RXD		(0x20)
-+#define MCF_GPIO_PAR_UART_U1RTS		(0x40)
-+#define MCF_GPIO_PAR_UART_U1CTS		(0x80)
-+#define MCF_GPIO_PAR_UART_U1CTS_U1CTS	(0x80)
-+#define MCF_GPIO_PAR_UART_U1CTS_GPIO	(0x00)
-+#define MCF_GPIO_PAR_UART_U1RTS_U1RTS	(0x40)
-+#define MCF_GPIO_PAR_UART_U1RTS_GPIO	(0x00)
-+#define MCF_GPIO_PAR_UART_U1RXD_U1RXD	(0x20)
-+#define MCF_GPIO_PAR_UART_U1RXD_GPIO	(0x00)
-+#define MCF_GPIO_PAR_UART_U1TXD_U1TXD	(0x10)
-+#define MCF_GPIO_PAR_UART_U1TXD_GPIO	(0x00)
-+#define MCF_GPIO_PAR_UART_U0CTS_U0CTS	(0x08)
-+#define MCF_GPIO_PAR_UART_U0CTS_GPIO	(0x00)
-+#define MCF_GPIO_PAR_UART_U0RTS_U0RTS	(0x04)
-+#define MCF_GPIO_PAR_UART_U0RTS_GPIO	(0x00)
-+#define MCF_GPIO_PAR_UART_U0RXD_U0RXD	(0x02)
-+#define MCF_GPIO_PAR_UART_U0RXD_GPIO	(0x00)
-+#define MCF_GPIO_PAR_UART_U0TXD_U0TXD	(0x01)
-+#define MCF_GPIO_PAR_UART_U0TXD_GPIO	(0x00)
-+
-+/* Bit definitions and macros for PAR_FECI2C */
-+#define MCF_GPIO_PAR_FECI2C_SDA(x)	(((x)&0x0003))
-+#define MCF_GPIO_PAR_FECI2C_SCL(x)	(((x)&0x0003)<<2)
-+#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x)	(((x)&0x0003))
-+#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x)	(((x)&0x0003)<<2)
-+#define MCF_GPIO_PAR_FECI2C_MDIO0	(0x0010)
-+#define MCF_GPIO_PAR_FECI2C_MDC0	(0x0040)
-+#define MCF_GPIO_PAR_FECI2C_MDIO1(x)	(((x)&0x0003)<<8)
-+#define MCF_GPIO_PAR_FECI2C_MDC1(x)	(((x)&0x0003)<<10)
-+#define MCF_GPIO_PAR_FECI2C_MDC1_MASK	(0xF3FF)
-+#define MCF_GPIO_PAR_FECI2C_MDC1_MDC1	(0x0C00)
-+#define MCF_GPIO_PAR_FECI2C_MDC1_ATA_DIOR (0x0800)
-+#define MCF_GPIO_PAR_FECI2C_MDC1_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_FECI2C_MDIO1_MASK	(0xFCFF)
-+#define MCF_GPIO_PAR_FECI2C_MDIO1_MDIO1	(0x0300)
-+#define MCF_GPIO_PAR_FECI2C_MDIO1_ATA_DIOW (0x0200)
-+#define MCF_GPIO_PAR_FECI2C_MDIO1_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_FECI2C_MDC0_MDC0	(0x0040)
-+#define MCF_GPIO_PAR_FECI2C_MDC0_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_FECI2C_MDIO0_MDIO0	(0x0010)
-+#define MCF_GPIO_PAR_FECI2C_MDIO0_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_FECI2C_SCL_MASK	(0xFFF3)
-+#define MCF_GPIO_PAR_FECI2C_SCL_SCL	(0x000C)
-+#define MCF_GPIO_PAR_FECI2C_SCL_U2TXD	(0x0004)
-+#define MCF_GPIO_PAR_FECI2C_SCL_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_FECI2C_SDA_MASK	(0xFFFC)
-+#define MCF_GPIO_PAR_FECI2C_SDA_SDA	(0x0003)
-+#define MCF_GPIO_PAR_FECI2C_SDA_U2RXD	(0x0001)
-+#define MCF_GPIO_PAR_FECI2C_SDA_GPIO	(0x0000)
-+
-+/* Bit definitions and macros for PAR_SSI */
-+#define MCF_GPIO_PAR_SSI_MCLK		(0x0001)
-+#define MCF_GPIO_PAR_SSI_STXD(x)	(((x)&0x0003)<<2)
-+#define MCF_GPIO_PAR_SSI_SRXD(x)	(((x)&0x0003)<<4)
-+#define MCF_GPIO_PAR_SSI_FS(x)		(((x)&0x0003)<<6)
-+#define MCF_GPIO_PAR_SSI_BCLK(x)	(((x)&0x0003)<<8)
-+#define MCF_GPIO_PAR_SSI_BCLK_MASK	(0xFCFF)
-+#define MCF_GPIO_PAR_SSI_BCLK_BCLK	(0x0300)
-+#define MCF_GPIO_PAR_SSI_BCLK_U1CTS	(0x0200)
-+#define MCF_GPIO_PAR_SSI_BCLK_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_SSI_FS_MASK	(0xFF3F)
-+#define MCF_GPIO_PAR_SSI_FS_FS		(0x00C0)
-+#define MCF_GPIO_PAR_SSI_FS_U1RTS	(0x0080)
-+#define MCF_GPIO_PAR_SSI_FS_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_SSI_SRXD_MASK	(0xFFCF)
-+#define MCF_GPIO_PAR_SSI_SRXD_SRXD	(0x0030)
-+#define MCF_GPIO_PAR_SSI_SRXD_U1RXD	(0x0020)
-+#define MCF_GPIO_PAR_SSI_SRXD_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_SSI_STXD_MASK	(0xFFF3)
-+#define MCF_GPIO_PAR_SSI_STXD_STXD	(0x000C)
-+#define MCF_GPIO_PAR_SSI_STXD_U1TXD	(0x0008)
-+#define MCF_GPIO_PAR_SSI_STXD_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_SSI_MCLK_MCLK	(0x0001)
-+#define MCF_GPIO_PAR_SSI_MCLK_GPIO	(0x0000)
-+
-+/* Bit definitions and macros for PAR_ATA */
-+#define MCF_GPIO_PAR_ATA_IORDY		(0x0001)
-+#define MCF_GPIO_PAR_ATA_DMARQ		(0x0002)
-+#define MCF_GPIO_PAR_ATA_RESET		(0x0004)
-+#define MCF_GPIO_PAR_ATA_DA0		(0x0020)
-+#define MCF_GPIO_PAR_ATA_DA1		(0x0040)
-+#define MCF_GPIO_PAR_ATA_DA2		(0x0080)
-+#define MCF_GPIO_PAR_ATA_CS0		(0x0100)
-+#define MCF_GPIO_PAR_ATA_CS1		(0x0200)
-+#define MCF_GPIO_PAR_ATA_BUFEN		(0x0400)
-+#define MCF_GPIO_PAR_ATA_BUFEN_BUFEN	(0x0400)
-+#define MCF_GPIO_PAR_ATA_BUFEN_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_ATA_CS1_CS1	(0x0200)
-+#define MCF_GPIO_PAR_ATA_CS1_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_ATA_CS0_CS0	(0x0100)
-+#define MCF_GPIO_PAR_ATA_CS0_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_ATA_DA2_DA2	(0x0080)
-+#define MCF_GPIO_PAR_ATA_DA2_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_ATA_DA1_DA1	(0x0040)
-+#define MCF_GPIO_PAR_ATA_DA1_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_ATA_DA0_DA0	(0x0020)
-+#define MCF_GPIO_PAR_ATA_DA0_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_ATA_RESET_RESET	(0x0004)
-+#define MCF_GPIO_PAR_ATA_RESET_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_ATA_DMARQ_DMARQ	(0x0002)
-+#define MCF_GPIO_PAR_ATA_DMARQ_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_ATA_IORDY_IORDY	(0x0001)
-+#define MCF_GPIO_PAR_ATA_IORDY_GPIO	(0x0000)
-+
-+/* Bit definitions and macros for PAR_IRQ */
-+#define MCF_GPIO_PAR_IRQ_IRQ1		(0x02)
-+#define MCF_GPIO_PAR_IRQ_IRQ4		(0x10)
-+#define MCF_GPIO_PAR_IRQ_IRQ4_IRQ4	(0x10)
-+#define MCF_GPIO_PAR_IRQ_IRQ4_GPIO	(0x00)
-+#define MCF_GPIO_PAR_IRQ_IRQ1_IRQ1	(0x02)
-+#define MCF_GPIO_PAR_IRQ_IRQ1_GPIO	(0x00)
-+
-+/* Bit definitions and macros for PAR_PCI */
-+#define MCF_GPIO_PAR_PCI_REQ0		(0x0001)
-+#define MCF_GPIO_PAR_PCI_REQ1		(0x0004)
-+#define MCF_GPIO_PAR_PCI_REQ2		(0x0010)
-+#define MCF_GPIO_PAR_PCI_REQ3(x)	(((x)&0x0003)<<6)
-+#define MCF_GPIO_PAR_PCI_GNT0		(0x0100)
-+#define MCF_GPIO_PAR_PCI_GNT1		(0x0400)
-+#define MCF_GPIO_PAR_PCI_GNT2		(0x1000)
-+#define MCF_GPIO_PAR_PCI_GNT3(x)	(((x)&0x0003)<<14)
-+#define MCF_GPIO_PAR_PCI_GNT3_MASK	(0x3FFF)
-+#define MCF_GPIO_PAR_PCI_GNT3_GNT3	(0xC000)
-+#define MCF_GPIO_PAR_PCI_GNT3_ATA_DMACK	(0x8000)
-+#define MCF_GPIO_PAR_PCI_GNT3_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_PCI_GNT2_GNT2	(0x1000)
-+#define MCF_GPIO_PAR_PCI_GNT2_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_PCI_GNT1_GNT1	(0x0400)
-+#define MCF_GPIO_PAR_PCI_GNT1_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_PCI_GNT0_GNT0	(0x0100)
-+#define MCF_GPIO_PAR_PCI_GNT0_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_PCI_REQ3_MASK	(0xFF3F)
-+#define MCF_GPIO_PAR_PCI_REQ3_REQ3	(0x00C0)
-+#define MCF_GPIO_PAR_PCI_REQ3_ATA_INTRQ	(0x0080)
-+#define MCF_GPIO_PAR_PCI_REQ3_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_PCI_REQ2_REQ2	(0x0010)
-+#define MCF_GPIO_PAR_PCI_REQ2_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_PCI_REQ1_REQ1	(0x0040)
-+#define MCF_GPIO_PAR_PCI_REQ1_GPIO	(0x0000)
-+#define MCF_GPIO_PAR_PCI_REQ0_REQ0	(0x0001)
-+#define MCF_GPIO_PAR_PCI_REQ0_GPIO	(0x0000)
-+
-+/* Bit definitions and macros for MSCR_SDRAM */
-+#define MCF_GPIO_MSCR_SDRAM_SDCTL(x)		(((x)&0x03))
-+#define MCF_GPIO_MSCR_SDRAM_SDCLK(x)		(((x)&0x03)<<2)
-+#define MCF_GPIO_MSCR_SDRAM_SDDQS(x)		(((x)&0x03)<<4)
-+#define MCF_GPIO_MSCR_SDRAM_SDDATA(x)		(((x)&0x03)<<6)
-+#define MCF_GPIO_MSCR_SDRAM_SDDATA_MASK		(0x3F)
-+#define MCF_GPIO_MSCR_SDRAM_SDDATA_DDR1		(0xC0)
-+#define MCF_GPIO_MSCR_SDRAM_SDDATA_DDR2		(0x80)
-+#define MCF_GPIO_MSCR_SDRAM_SDDATA_FS_LPDDR	(0x40)
-+#define MCF_GPIO_MSCR_SDRAM_SDDATA_HS_LPDDR	(0x00)
-+#define MCF_GPIO_MSCR_SDRAM_SDDQS_MASK		(0xCF)
-+#define MCF_GPIO_MSCR_SDRAM_SDDQS_DDR1		(0x30)
-+#define MCF_GPIO_MSCR_SDRAM_SDDQS_DDR2		(0x20)
-+#define MCF_GPIO_MSCR_SDRAM_SDDQS_FS_LPDDR	(0x10)
-+#define MCF_GPIO_MSCR_SDRAM_SDDQS_HS_LPDDR	(0x00)
-+#define MCF_GPIO_MSCR_SDRAM_SDCLK_MASK		(0xF3)
-+#define MCF_GPIO_MSCR_SDRAM_SDCLK_DDR1		(0x0C)
-+#define MCF_GPIO_MSCR_SDRAM_SDCLK_DDR2		(0x08)
-+#define MCF_GPIO_MSCR_SDRAM_SDCLK_FS_LPDDR	(0x04)
-+#define MCF_GPIO_MSCR_SDRAM_SDCLK_HS_LPDDR	(0x00)
-+#define MCF_GPIO_MSCR_SDRAM_SDCTL_MASK		(0xFC)
-+#define MCF_GPIO_MSCR_SDRAM_SDCTL_DDR1		(0x03)
-+#define MCF_GPIO_MSCR_SDRAM_SDCTL_DDR2		(0x02)
-+#define MCF_GPIO_MSCR_SDRAM_SDCTL_FS_LPDDR	(0x01)
-+#define MCF_GPIO_MSCR_SDRAM_SDCTL_HS_LPDDR	(0x00)
-+
-+/* Bit definitions and macros for MSCR_PCI */
-+#define MCF_GPIO_MSCR_PCI_PCI		(0x01)
-+#define MCF_GPIO_MSCR_PCI_PCI_HI_66MHZ	(0x01)
-+#define MCF_GPIO_MSCR_PCI_PCI_LO_33MHZ	(0x00)
-+
-+/* Bit definitions and macros for DSCR_I2C */
-+#define MCF_GPIO_DSCR_I2C_I2C(x)	(((x)&0x03))
-+#define MCF_GPIO_DSCR_I2C_I2C_LOAD_50PF	(0x03)
-+#define MCF_GPIO_DSCR_I2C_I2C_LOAD_30PF	(0x02)
-+#define MCF_GPIO_DSCR_I2C_I2C_LOAD_20PF	(0x01)
-+#define MCF_GPIO_DSCR_I2C_I2C_LOAD_10PF	(0x00)
-+
-+/* Bit definitions and macros for DSCR_FLEXBUS */
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADL(x)		(((x)&0x03))
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADH(x)		(((x)&0x03)<<2)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCTL(x)		(((x)&0x03)<<4)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCLK(x)		(((x)&0x03)<<6)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_50PF	(0xC0)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_30P	(0x80)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_20PF	(0x40)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_10PF	(0x00)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_50PF	(0x30)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_30PF	(0x20)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_20PF	(0x10)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_10PF	(0x00)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_50PF	(0x0C)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_30PF	(0x08)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_20PF	(0x04)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_10PF	(0x00)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_50PF	(0x03)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_30PF	(0x02)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_20PF	(0x01)
-+#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_10PF	(0x00)
-+
-+/* Bit definitions and macros for DSCR_FEC */
-+#define MCF_GPIO_DSCR_FEC_FEC0(x)		(((x)&0x03))
-+#define MCF_GPIO_DSCR_FEC_FEC1(x)		(((x)&0x03)<<2)
-+#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_50PF	(0x0C)
-+#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_30PF	(0x08)
-+#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_20PF	(0x04)
-+#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_10PF	(0x00)
-+#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_50PF	(0x03)
-+#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_30PF	(0x02)
-+#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_20PF	(0x01)
-+#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_10PF	(0x00)
-+
-+/* Bit definitions and macros for DSCR_UART */
-+#define MCF_GPIO_DSCR_UART_UART0(x)		(((x)&0x03))
-+#define MCF_GPIO_DSCR_UART_UART1(x)		(((x)&0x03)<<2)
-+#define MCF_GPIO_DSCR_UART_UART1_LOAD_50PF	(0x0C)
-+#define MCF_GPIO_DSCR_UART_UART1_LOAD_30PF	(0x08)
-+#define MCF_GPIO_DSCR_UART_UART1_LOAD_20PF	(0x04)
-+#define MCF_GPIO_DSCR_UART_UART1_LOAD_10PF	(0x00)
-+#define MCF_GPIO_DSCR_UART_UART0_LOAD_50PF	(0x03)
-+#define MCF_GPIO_DSCR_UART_UART0_LOAD_30PF	(0x02)
-+#define MCF_GPIO_DSCR_UART_UART0_LOAD_20PF	(0x01)
-+#define MCF_GPIO_DSCR_UART_UART0_LOAD_10PF	(0x00)
-+
-+/* Bit definitions and macros for DSCR_DSPI */
-+#define MCF_GPIO_DSCR_DSPI_DSPI(x)		(((x)&0x03))
-+#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_50PF	(0x03)
-+#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_30PF	(0x02)
-+#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_20PF	(0x01)
-+#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_10PF	(0x00)
-+
-+/* Bit definitions and macros for DSCR_TIMER */
-+#define MCF_GPIO_DSCR_TIMER_TIMER(x)		(((x)&0x03))
-+#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_50PF	(0x03)
-+#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_30PF	(0x02)
-+#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_20PF	(0x01)
-+#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_10PF	(0x00)
-+
-+/* Bit definitions and macros for DSCR_SSI */
-+#define MCF_GPIO_DSCR_SSI_SSI(x)	(((x)&0x03))
-+#define MCF_GPIO_DSCR_SSI_SSI_LOAD_50PF	(0x03)
-+#define MCF_GPIO_DSCR_SSI_SSI_LOAD_30PF	(0x02)
-+#define MCF_GPIO_DSCR_SSI_SSI_LOAD_20PF (0x01)
-+#define MCF_GPIO_DSCR_SSI_SSI_LOAD_10PF (0x00)
-+
-+/* Bit definitions and macros for DSCR_DMA */
-+#define MCF_GPIO_DSCR_DMA_DMA(x)	(((x)&0x03))
-+#define MCF_GPIO_DSCR_DMA_DMA_LOAD_50PF	(0x03)
-+#define MCF_GPIO_DSCR_DMA_DMA_LOAD_30PF	(0x02)
-+#define MCF_GPIO_DSCR_DMA_DMA_LOAD_20PF	(0x01)
-+#define MCF_GPIO_DSCR_DMA_DMA_LOAD_10PF	(0x00)
-+
-+/* Bit definitions and macros for DSCR_DEBUG */
-+#define MCF_GPIO_DSCR_DEBUG_DEBUG(x)		(((x)&0x03))
-+#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_50PF	(0x03)
-+#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_30PF	(0x02)
-+#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_20PF	(0x01)
-+#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_10PF	(0x00)
-+
-+/* Bit definitions and macros for DSCR_RESET */
-+#define MCF_GPIO_DSCR_RESET_RESET(x)		(((x)&0x03))
-+#define MCF_GPIO_DSCR_RESET_RESET_LOAD_50PF	(0x03)
-+#define MCF_GPIO_DSCR_RESET_RESET_LOAD_30PF	(0x02)
-+#define MCF_GPIO_DSCR_RESET_RESET_LOAD_20PF	(0x01)
-+#define MCF_GPIO_DSCR_RESET_RESET_LOAD_10PF	(0x00)
-+
-+/* Bit definitions and macros for DSCR_IRQ */
-+#define MCF_GPIO_DSCR_IRQ_IRQ(x)	(((x)&0x03))
-+#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_50PF	(0x03)
-+#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_30PF	(0x02)
-+#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_20PF	(0x01)
-+#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_10PF	(0x00)
-+
-+/* Bit definitions and macros for DSCR_USB */
-+#define MCF_GPIO_DSCR_USB_USB(x)	(((x)&0x03))
-+#define MCF_GPIO_DSCR_USB_USB_LOAD_50PF	(0x03)
-+#define MCF_GPIO_DSCR_USB_USB_LOAD_30PF	(0x02)
-+#define MCF_GPIO_DSCR_USB_USB_LOAD_20PF	(0x01)
-+#define MCF_GPIO_DSCR_USB_USB_LOAD_10PF	(0x00)
-+
-+/* Bit definitions and macros for DSCR_ATA */
-+#define MCF_GPIO_DSCR_ATA_ATA(x)	(((x)&0x03))
-+#define MCF_GPIO_DSCR_ATA_ATA_LOAD_50PF	(0x03)
-+#define MCF_GPIO_DSCR_ATA_ATA_LOAD_30PF	(0x02)
-+#define MCF_GPIO_DSCR_ATA_ATA_LOAD_20PF	(0x01)
-+#define MCF_GPIO_DSCR_ATA_ATA_LOAD_10PF	(0x00)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_GPIO_H__ */
---- /dev/null
-+++ b/include/asm-m68k/mcf5445x_i2c.h
-@@ -0,0 +1,39 @@
-+/*
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_I2C_H__
-+#define __MCF5445X_I2C_H__
-+
-+/*********************************************************************
-+*
-+* I2C Module (I2C)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_I2C_I2ADR	(volatile u8 *)(0xFC058000)
-+#define MCF_I2C_I2FDR	(volatile u8 *)(0xFC058004)
-+#define MCF_I2C_I2CR	(volatile u8 *)(0xFC058008)
-+#define MCF_I2C_I2SR	(volatile u8 *)(0xFC05800C)
-+#define MCF_I2C_I2DR	(volatile u8 *)(0xFC058010)
-+
-+/* Bit definitions and macros for I2AR */
-+#define MCF_I2C_I2AR_ADR(x)	(((x)&0x7F)<<1)
-+
-+/* Bit definitions and macros for I2FDR */
-+#define MCF_I2C_I2FDR_IC(x)	(((x)&0x3F))
-+
-+/* Bit definitions and macros for I2DR */
-+#define MCF_I2C_I2DR_DATA(x)	(x)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_I2C_H__ */
---- /dev/null
-+++ b/include/asm-m68k/mcf5445x_intc.h
-@@ -0,0 +1,724 @@
-+/*
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_INTC_H__
-+#define __MCF5445X_INTC_H__
-+
-+/*********************************************************************
-+*
-+* Interrupt Controller (INTC)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_INTC0_IPRH          MCF_REG32(0xFC048000)
-+#define MCF_INTC0_IPRL          MCF_REG32(0xFC048004)
-+#define MCF_INTC0_IMRH          MCF_REG32(0xFC048008)
-+#define MCF_INTC0_IMRL          MCF_REG32(0xFC04800C)
-+#define MCF_INTC0_INTFRCH       MCF_REG32(0xFC048010)
-+#define MCF_INTC0_INTFRCL       MCF_REG32(0xFC048014)
-+#define MCF_INTC0_ICONFIG       MCF_REG16(0xFC04801A)
-+#define MCF_INTC0_SIMR          MCF_REG08(0xFC04801C)
-+#define MCF_INTC0_CIMR          MCF_REG08(0xFC04801D)
-+#define MCF_INTC0_CLMASK        MCF_REG08(0xFC04801E)
-+#define MCF_INTC0_SLMASK        MCF_REG08(0xFC04801F)
-+#define MCF_INTC0_ICR1          MCF_REG08(0xFC048041)
-+#define MCF_INTC0_ICR2          MCF_REG08(0xFC048042)
-+#define MCF_INTC0_ICR3          MCF_REG08(0xFC048043)
-+#define MCF_INTC0_ICR4          MCF_REG08(0xFC048044)
-+#define MCF_INTC0_ICR5          MCF_REG08(0xFC048045)
-+#define MCF_INTC0_ICR6          MCF_REG08(0xFC048046)
-+#define MCF_INTC0_ICR7          MCF_REG08(0xFC048047)
-+#define MCF_INTC0_ICR8          MCF_REG08(0xFC048048)
-+#define MCF_INTC0_ICR9          MCF_REG08(0xFC048049)
-+#define MCF_INTC0_ICR10         MCF_REG08(0xFC04804A)
-+#define MCF_INTC0_ICR11         MCF_REG08(0xFC04804B)
-+#define MCF_INTC0_ICR12         MCF_REG08(0xFC04804C)
-+#define MCF_INTC0_ICR13         MCF_REG08(0xFC04804D)
-+#define MCF_INTC0_ICR14         MCF_REG08(0xFC04804E)
-+#define MCF_INTC0_ICR15         MCF_REG08(0xFC04804F)
-+#define MCF_INTC0_ICR16         MCF_REG08(0xFC048050)
-+#define MCF_INTC0_ICR17         MCF_REG08(0xFC048051)
-+#define MCF_INTC0_ICR18         MCF_REG08(0xFC048052)
-+#define MCF_INTC0_ICR19         MCF_REG08(0xFC048053)
-+#define MCF_INTC0_ICR20         MCF_REG08(0xFC048054)
-+#define MCF_INTC0_ICR21         MCF_REG08(0xFC048055)
-+#define MCF_INTC0_ICR22         MCF_REG08(0xFC048056)
-+#define MCF_INTC0_ICR23         MCF_REG08(0xFC048057)
-+#define MCF_INTC0_ICR24         MCF_REG08(0xFC048058)
-+#define MCF_INTC0_ICR25         MCF_REG08(0xFC048059)
-+#define MCF_INTC0_ICR26         MCF_REG08(0xFC04805A)
-+#define MCF_INTC0_ICR27         MCF_REG08(0xFC04805B)
-+#define MCF_INTC0_ICR28         MCF_REG08(0xFC04805C)
-+#define MCF_INTC0_ICR29         MCF_REG08(0xFC04805D)
-+#define MCF_INTC0_ICR30         MCF_REG08(0xFC04805E)
-+#define MCF_INTC0_ICR31         MCF_REG08(0xFC04805F)
-+#define MCF_INTC0_ICR32         MCF_REG08(0xFC048060)
-+#define MCF_INTC0_ICR33         MCF_REG08(0xFC048061)
-+#define MCF_INTC0_ICR34         MCF_REG08(0xFC048062)
-+#define MCF_INTC0_ICR35         MCF_REG08(0xFC048063)
-+#define MCF_INTC0_ICR36         MCF_REG08(0xFC048064)
-+#define MCF_INTC0_ICR37         MCF_REG08(0xFC048065)
-+#define MCF_INTC0_ICR38         MCF_REG08(0xFC048066)
-+#define MCF_INTC0_ICR39         MCF_REG08(0xFC048067)
-+#define MCF_INTC0_ICR40         MCF_REG08(0xFC048068)
-+#define MCF_INTC0_ICR41         MCF_REG08(0xFC048069)
-+#define MCF_INTC0_ICR42         MCF_REG08(0xFC04806A)
-+#define MCF_INTC0_ICR43         MCF_REG08(0xFC04806B)
-+#define MCF_INTC0_ICR44         MCF_REG08(0xFC04806C)
-+#define MCF_INTC0_ICR45         MCF_REG08(0xFC04806D)
-+#define MCF_INTC0_ICR46         MCF_REG08(0xFC04806E)
-+#define MCF_INTC0_ICR47         MCF_REG08(0xFC04806F)
-+#define MCF_INTC0_ICR48         MCF_REG08(0xFC048070)
-+#define MCF_INTC0_ICR49         MCF_REG08(0xFC048071)
-+#define MCF_INTC0_ICR50         MCF_REG08(0xFC048072)
-+#define MCF_INTC0_ICR51         MCF_REG08(0xFC048073)
-+#define MCF_INTC0_ICR52         MCF_REG08(0xFC048074)
-+#define MCF_INTC0_ICR53         MCF_REG08(0xFC048075)
-+#define MCF_INTC0_ICR54         MCF_REG08(0xFC048076)
-+#define MCF_INTC0_ICR55         MCF_REG08(0xFC048077)
-+#define MCF_INTC0_ICR56         MCF_REG08(0xFC048078)
-+#define MCF_INTC0_ICR57         MCF_REG08(0xFC048079)
-+#define MCF_INTC0_ICR58         MCF_REG08(0xFC04807A)
-+#define MCF_INTC0_ICR59         MCF_REG08(0xFC04807B)
-+#define MCF_INTC0_ICR60         MCF_REG08(0xFC04807C)
-+#define MCF_INTC0_ICR61         MCF_REG08(0xFC04807D)
-+#define MCF_INTC0_ICR62         MCF_REG08(0xFC04807E)
-+#define MCF_INTC0_ICR63         MCF_REG08(0xFC04807F)
-+#define MCF_INTC0_SWIACK        MCF_REG08(0xFC0480E0)
-+#define MCF_INTC0_L1IACK        MCF_REG08(0xFC0480E4)
-+#define MCF_INTC0_L2IACK        MCF_REG08(0xFC0480E8)
-+#define MCF_INTC0_L3IACK        MCF_REG08(0xFC0480EC)
-+#define MCF_INTC0_L4IACK        MCF_REG08(0xFC0480F0)
-+#define MCF_INTC0_L5IACK        MCF_REG08(0xFC0480F4)
-+#define MCF_INTC0_L6IACK        MCF_REG08(0xFC0480F8)
-+#define MCF_INTC0_L7IACK        MCF_REG08(0xFC0480FC)
-+#define MCF_INTC1_IPRH          MCF_REG32(0xFC04C000)
-+#define MCF_INTC1_IPRL          MCF_REG32(0xFC04C004)
-+#define MCF_INTC1_IMRH          MCF_REG32(0xFC04C008)
-+#define MCF_INTC1_IMRL          MCF_REG32(0xFC04C00C)
-+#define MCF_INTC1_INTFRCH       MCF_REG32(0xFC04C010)
-+#define MCF_INTC1_INTFRCL       MCF_REG32(0xFC04C014)
-+#define MCF_INTC1_ICONFIG       MCF_REG16(0xFC04C01A)
-+#define MCF_INTC1_SIMR          MCF_REG08(0xFC04C01C)
-+#define MCF_INTC1_CIMR          MCF_REG08(0xFC04C01D)
-+#define MCF_INTC1_CLMASK        MCF_REG08(0xFC04C01E)
-+#define MCF_INTC1_SLMASK        MCF_REG08(0xFC04C01F)
-+#define MCF_INTC1_ICR1          MCF_REG08(0xFC04C041)
-+#define MCF_INTC1_ICR2          MCF_REG08(0xFC04C042)
-+#define MCF_INTC1_ICR3          MCF_REG08(0xFC04C043)
-+#define MCF_INTC1_ICR4          MCF_REG08(0xFC04C044)
-+#define MCF_INTC1_ICR5          MCF_REG08(0xFC04C045)
-+#define MCF_INTC1_ICR6          MCF_REG08(0xFC04C046)
-+#define MCF_INTC1_ICR7          MCF_REG08(0xFC04C047)
-+#define MCF_INTC1_ICR8          MCF_REG08(0xFC04C048)
-+#define MCF_INTC1_ICR9          MCF_REG08(0xFC04C049)
-+#define MCF_INTC1_ICR10         MCF_REG08(0xFC04C04A)
-+#define MCF_INTC1_ICR11         MCF_REG08(0xFC04C04B)
-+#define MCF_INTC1_ICR12         MCF_REG08(0xFC04C04C)
-+#define MCF_INTC1_ICR13         MCF_REG08(0xFC04C04D)
-+#define MCF_INTC1_ICR14         MCF_REG08(0xFC04C04E)
-+#define MCF_INTC1_ICR15         MCF_REG08(0xFC04C04F)
-+#define MCF_INTC1_ICR16         MCF_REG08(0xFC04C050)
-+#define MCF_INTC1_ICR17         MCF_REG08(0xFC04C051)
-+#define MCF_INTC1_ICR18         MCF_REG08(0xFC04C052)
-+#define MCF_INTC1_ICR19         MCF_REG08(0xFC04C053)
-+#define MCF_INTC1_ICR20         MCF_REG08(0xFC04C054)
-+#define MCF_INTC1_ICR21         MCF_REG08(0xFC04C055)
-+#define MCF_INTC1_ICR22         MCF_REG08(0xFC04C056)
-+#define MCF_INTC1_ICR23         MCF_REG08(0xFC04C057)
-+#define MCF_INTC1_ICR24         MCF_REG08(0xFC04C058)
-+#define MCF_INTC1_ICR25         MCF_REG08(0xFC04C059)
-+#define MCF_INTC1_ICR26         MCF_REG08(0xFC04C05A)
-+#define MCF_INTC1_ICR27         MCF_REG08(0xFC04C05B)
-+#define MCF_INTC1_ICR28         MCF_REG08(0xFC04C05C)
-+#define MCF_INTC1_ICR29         MCF_REG08(0xFC04C05D)
-+#define MCF_INTC1_ICR30         MCF_REG08(0xFC04C05E)
-+#define MCF_INTC1_ICR31         MCF_REG08(0xFC04C05F)
-+#define MCF_INTC1_ICR32         MCF_REG08(0xFC04C060)
-+#define MCF_INTC1_ICR33         MCF_REG08(0xFC04C061)
-+#define MCF_INTC1_ICR34         MCF_REG08(0xFC04C062)
-+#define MCF_INTC1_ICR35         MCF_REG08(0xFC04C063)
-+#define MCF_INTC1_ICR36         MCF_REG08(0xFC04C064)
-+#define MCF_INTC1_ICR37         MCF_REG08(0xFC04C065)
-+#define MCF_INTC1_ICR38         MCF_REG08(0xFC04C066)
-+#define MCF_INTC1_ICR39         MCF_REG08(0xFC04C067)
-+#define MCF_INTC1_ICR40         MCF_REG08(0xFC04C068)
-+#define MCF_INTC1_ICR41         MCF_REG08(0xFC04C069)
-+#define MCF_INTC1_ICR42         MCF_REG08(0xFC04C06A)
-+#define MCF_INTC1_ICR43         MCF_REG08(0xFC04C06B)
-+#define MCF_INTC1_ICR44         MCF_REG08(0xFC04C06C)
-+#define MCF_INTC1_ICR45         MCF_REG08(0xFC04C06D)
-+#define MCF_INTC1_ICR46         MCF_REG08(0xFC04C06E)
-+#define MCF_INTC1_ICR47         MCF_REG08(0xFC04C06F)
-+#define MCF_INTC1_ICR48         MCF_REG08(0xFC04C070)
-+#define MCF_INTC1_ICR49         MCF_REG08(0xFC04C071)
-+#define MCF_INTC1_ICR50         MCF_REG08(0xFC04C072)
-+#define MCF_INTC1_ICR51         MCF_REG08(0xFC04C073)
-+#define MCF_INTC1_ICR52         MCF_REG08(0xFC04C074)
-+#define MCF_INTC1_ICR53         MCF_REG08(0xFC04C075)
-+#define MCF_INTC1_ICR54         MCF_REG08(0xFC04C076)
-+#define MCF_INTC1_ICR55         MCF_REG08(0xFC04C077)
-+#define MCF_INTC1_ICR56         MCF_REG08(0xFC04C078)
-+#define MCF_INTC1_ICR57         MCF_REG08(0xFC04C079)
-+#define MCF_INTC1_ICR58         MCF_REG08(0xFC04C07A)
-+#define MCF_INTC1_ICR59         MCF_REG08(0xFC04C07B)
-+#define MCF_INTC1_ICR60         MCF_REG08(0xFC04C07C)
-+#define MCF_INTC1_ICR61         MCF_REG08(0xFC04C07D)
-+#define MCF_INTC1_ICR62         MCF_REG08(0xFC04C07E)
-+#define MCF_INTC1_ICR63         MCF_REG08(0xFC04C07F)
-+#define MCF_INTC1_SWIACK        MCF_REG08(0xFC04C0E0)
-+#define MCF_INTC1_L1IACK        MCF_REG08(0xFC04C0E4)
-+#define MCF_INTC1_L2IACK        MCF_REG08(0xFC04C0E8)
-+#define MCF_INTC1_L3IACK        MCF_REG08(0xFC04C0EC)
-+#define MCF_INTC1_L4IACK        MCF_REG08(0xFC04C0F0)
-+#define MCF_INTC1_L5IACK        MCF_REG08(0xFC04C0F4)
-+#define MCF_INTC1_L6IACK        MCF_REG08(0xFC04C0F8
-+#define MCF_INTC1_L7IACK        MCF_REG08(0xFC04C0FC)
-+
-+/* Parameterized register read/write macros for multiple registers */
-+#define MCF_INTC0_ICR(x)        MCF_REG08(0xFC048041+((x-1)*0x001))
-+#define MCF_INTC0_LIACK(x)      MCF_REG08(0xFC0480E4+((x-1)*0x004))
-+#define MCF_INTC1_ICR(x)        MCF_REG08(0xFC04C041+((x-1)*0x001))
-+#define MCF_INTC1_LIACK(x)      MCF_REG08(0xFC04C0E4+((x-1)*0x004))
-+
-+/* Parameterized register read/write macros for multiple modules */
-+#define MCF_INTC_IPRH(x)        MCF_REG32(0xFC048000+((x)*0x4000))
-+#define MCF_INTC_IPRL(x)        MCF_REG32(0xFC048004+((x)*0x4000))
-+#define MCF_INTC_IMRH(x)        MCF_REG32(0xFC048008+((x)*0x4000))
-+#define MCF_INTC_IMRL(x)        MCF_REG32(0xFC04800C+((x)*0x4000))
-+#define MCF_INTC_INTFRCH(x)     MCF_REG32(0xFC048010+((x)*0x4000))
-+#define MCF_INTC_INTFRCL(x)     MCF_REG32(0xFC048014+((x)*0x4000))
-+#define MCF_INTC_ICONFIG(x)     MCF_REG16(0xFC04801A+((x)*0x4000))
-+#define MCF_INTC_SIMR(x)        MCF_REG08(0xFC04801C+((x)*0x4000))
-+#define MCF_INTC_CIMR(x)        MCF_REG08(0xFC04801D+((x)*0x4000))
-+#define MCF_INTC_CLMASK(x)      MCF_REG08(0xFC04801E+((x)*0x4000))
-+#define MCF_INTC_SLMASK(x)      MCF_REG08(0xFC04801F+((x)*0x4000))
-+#define MCF_INTC_ICR1(x)        MCF_REG08(0xFC048041+((x)*0x4000))
-+#define MCF_INTC_ICR2(x)        MCF_REG08(0xFC048042+((x)*0x4000))
-+#define MCF_INTC_ICR3(x)        MCF_REG08(0xFC048043+((x)*0x4000))
-+#define MCF_INTC_ICR4(x)        MCF_REG08(0xFC048044+((x)*0x4000))
-+#define MCF_INTC_ICR5(x)        MCF_REG08(0xFC048045+((x)*0x4000))
-+#define MCF_INTC_ICR6(x)        MCF_REG08(0xFC048046+((x)*0x4000))
-+#define MCF_INTC_ICR7(x)        MCF_REG08(0xFC048047+((x)*0x4000))
-+#define MCF_INTC_ICR8(x)        MCF_REG08(0xFC048048+((x)*0x4000))
-+#define MCF_INTC_ICR9(x)        MCF_REG08(0xFC048049+((x)*0x4000))
-+#define MCF_INTC_ICR10(x)       MCF_REG08(0xFC04804A+((x)*0x4000))
-+#define MCF_INTC_ICR11(x)       MCF_REG08(0xFC04804B+((x)*0x4000))
-+#define MCF_INTC_ICR12(x)       MCF_REG08(0xFC04804C+((x)*0x4000))
-+#define MCF_INTC_ICR13(x)       MCF_REG08(0xFC04804D+((x)*0x4000))
-+#define MCF_INTC_ICR14(x)       MCF_REG08(0xFC04804E+((x)*0x4000))
-+#define MCF_INTC_ICR15(x)       MCF_REG08(0xFC04804F+((x)*0x4000))
-+#define MCF_INTC_ICR16(x)       MCF_REG08(0xFC048050+((x)*0x4000))
-+#define MCF_INTC_ICR17(x)       MCF_REG08(0xFC048051+((x)*0x4000))
-+#define MCF_INTC_ICR18(x)       MCF_REG08(0xFC048052+((x)*0x4000))
-+#define MCF_INTC_ICR19(x)       MCF_REG08(0xFC048053+((x)*0x4000))
-+#define MCF_INTC_ICR20(x)       MCF_REG08(0xFC048054+((x)*0x4000))
-+#define MCF_INTC_ICR21(x)       MCF_REG08(0xFC048055+((x)*0x4000))
-+#define MCF_INTC_ICR22(x)       MCF_REG08(0xFC048056+((x)*0x4000))
-+#define MCF_INTC_ICR23(x)       MCF_REG08(0xFC048057+((x)*0x4000))
-+#define MCF_INTC_ICR24(x)       MCF_REG08(0xFC048058+((x)*0x4000))
-+#define MCF_INTC_ICR25(x)       MCF_REG08(0xFC048059+((x)*0x4000))
-+#define MCF_INTC_ICR26(x)       MCF_REG08(0xFC04805A+((x)*0x4000))
-+#define MCF_INTC_ICR27(x)       MCF_REG08(0xFC04805B+((x)*0x4000))
-+#define MCF_INTC_ICR28(x)       MCF_REG08(0xFC04805C+((x)*0x4000))
-+#define MCF_INTC_ICR29(x)       MCF_REG08(0xFC04805D+((x)*0x4000))
-+#define MCF_INTC_ICR30(x)       MCF_REG08(0xFC04805E+((x)*0x4000))
-+#define MCF_INTC_ICR31(x)       MCF_REG08(0xFC04805F+((x)*0x4000))
-+#define MCF_INTC_ICR32(x)       MCF_REG08(0xFC048060+((x)*0x4000))
-+#define MCF_INTC_ICR33(x)       MCF_REG08(0xFC048061+((x)*0x4000))
-+#define MCF_INTC_ICR34(x)       MCF_REG08(0xFC048062+((x)*0x4000))
-+#define MCF_INTC_ICR35(x)       MCF_REG08(0xFC048063+((x)*0x4000))
-+#define MCF_INTC_ICR36(x)       MCF_REG08(0xFC048064+((x)*0x4000))
-+#define MCF_INTC_ICR37(x)       MCF_REG08(0xFC048065+((x)*0x4000))
-+#define MCF_INTC_ICR38(x)       MCF_REG08(0xFC048066+((x)*0x4000))
-+#define MCF_INTC_ICR39(x)       MCF_REG08(0xFC048067+((x)*0x4000))
-+#define MCF_INTC_ICR40(x)       MCF_REG08(0xFC048068+((x)*0x4000))
-+#define MCF_INTC_ICR41(x)       MCF_REG08(0xFC048069+((x)*0x4000))
-+#define MCF_INTC_ICR42(x)       MCF_REG08(0xFC04806A+((x)*0x4000))
-+#define MCF_INTC_ICR43(x)       MCF_REG08(0xFC04806B+((x)*0x4000))
-+#define MCF_INTC_ICR44(x)       MCF_REG08(0xFC04806C+((x)*0x4000))
-+#define MCF_INTC_ICR45(x)       MCF_REG08(0xFC04806D+((x)*0x4000))
-+#define MCF_INTC_ICR46(x)       MCF_REG08(0xFC04806E+((x)*0x4000))
-+#define MCF_INTC_ICR47(x)       MCF_REG08(0xFC04806F+((x)*0x4000))
-+#define MCF_INTC_ICR48(x)       MCF_REG08(0xFC048070+((x)*0x4000))
-+#define MCF_INTC_ICR49(x)       MCF_REG08(0xFC048071+((x)*0x4000))
-+#define MCF_INTC_ICR50(x)       MCF_REG08(0xFC048072+((x)*0x4000))
-+#define MCF_INTC_ICR51(x)       MCF_REG08(0xFC048073+((x)*0x4000))
-+#define MCF_INTC_ICR52(x)       MCF_REG08(0xFC048074+((x)*0x4000))
-+#define MCF_INTC_ICR53(x)       MCF_REG08(0xFC048075+((x)*0x4000))
-+#define MCF_INTC_ICR54(x)       MCF_REG08(0xFC048076+((x)*0x4000))
-+#define MCF_INTC_ICR55(x)       MCF_REG08(0xFC048077+((x)*0x4000))
-+#define MCF_INTC_ICR56(x)       MCF_REG08(0xFC048078+((x)*0x4000))
-+#define MCF_INTC_ICR57(x)       MCF_REG08(0xFC048079+((x)*0x4000))
-+#define MCF_INTC_ICR58(x)       MCF_REG08(0xFC04807A+((x)*0x4000))
-+#define MCF_INTC_ICR59(x)       MCF_REG08(0xFC04807B+((x)*0x4000))
-+#define MCF_INTC_ICR60(x)       MCF_REG08(0xFC04807C+((x)*0x4000))
-+#define MCF_INTC_ICR61(x)       MCF_REG08(0xFC04807D+((x)*0x4000))
-+#define MCF_INTC_ICR62(x)       MCF_REG08(0xFC04807E+((x)*0x4000))
-+#define MCF_INTC_ICR63(x)       MCF_REG08(0xFC04807F+((x)*0x4000))
-+#define MCF_INTC_SWIACK(x)      MCF_REG08(0xFC0480E0+((x)*0x4000))
-+#define MCF_INTC_L1IACK(x)      MCF_REG08(0xFC0480E4+((x)*0x4000))
-+#define MCF_INTC_L2IACK(x)      MCF_REG08(0xFC0480E8+((x)*0x4000))
-+#define MCF_INTC_L3IACK(x)      MCF_REG08(0xFC0480EC+((x)*0x4000))
-+#define MCF_INTC_L4IACK(x)      MCF_REG08(0xFC0480F0+((x)*0x4000))
-+#define MCF_INTC_L5IACK(x)      MCF_REG08(0xFC0480F4+((x)*0x4000))
-+#define MCF_INTC_L6IACK(x)      MCF_REG08(0xFC0480F8+((x)*0x4000))
-+#define MCF_INTC_L7IACK(x)      MCF_REG08(0xFC0480FC+((x)*0x4000))
-+
-+/* Bit definitions and macros for IPRH */
-+#define MCF_INTC_IPRH_INT32     (0x00000001)
-+#define MCF_INTC_IPRH_INT33     (0x00000002)
-+#define MCF_INTC_IPRH_INT34     (0x00000004)
-+#define MCF_INTC_IPRH_INT35     (0x00000008)
-+#define MCF_INTC_IPRH_INT36     (0x00000010)
-+#define MCF_INTC_IPRH_INT37     (0x00000020)
-+#define MCF_INTC_IPRH_INT38     (0x00000040)
-+#define MCF_INTC_IPRH_INT39     (0x00000080)
-+#define MCF_INTC_IPRH_INT40     (0x00000100)
-+#define MCF_INTC_IPRH_INT41     (0x00000200)
-+#define MCF_INTC_IPRH_INT42     (0x00000400)
-+#define MCF_INTC_IPRH_INT43     (0x00000800)
-+#define MCF_INTC_IPRH_INT44     (0x00001000)
-+#define MCF_INTC_IPRH_INT45     (0x00002000)
-+#define MCF_INTC_IPRH_INT46     (0x00004000)
-+#define MCF_INTC_IPRH_INT47     (0x00008000)
-+#define MCF_INTC_IPRH_INT48     (0x00010000)
-+#define MCF_INTC_IPRH_INT49     (0x00020000)
-+#define MCF_INTC_IPRH_INT50     (0x00040000)
-+#define MCF_INTC_IPRH_INT51     (0x00080000)
-+#define MCF_INTC_IPRH_INT52     (0x00100000)
-+#define MCF_INTC_IPRH_INT53     (0x00200000)
-+#define MCF_INTC_IPRH_INT54     (0x00400000)
-+#define MCF_INTC_IPRH_INT55     (0x00800000)
-+#define MCF_INTC_IPRH_INT56     (0x01000000)
-+#define MCF_INTC_IPRH_INT57     (0x02000000)
-+#define MCF_INTC_IPRH_INT58     (0x04000000)
-+#define MCF_INTC_IPRH_INT59     (0x08000000)
-+#define MCF_INTC_IPRH_INT60     (0x10000000)
-+#define MCF_INTC_IPRH_INT61     (0x20000000)
-+#define MCF_INTC_IPRH_INT62     (0x40000000)
-+#define MCF_INTC_IPRH_INT63     (0x80000000)
-+
-+/* Bit definitions and macros for IPRL */
-+#define MCF_INTC_IPRL_INT0      (0x00000001)
-+#define MCF_INTC_IPRL_INT1      (0x00000002)
-+#define MCF_INTC_IPRL_INT2      (0x00000004)
-+#define MCF_INTC_IPRL_INT3      (0x00000008)
-+#define MCF_INTC_IPRL_INT4      (0x00000010)
-+#define MCF_INTC_IPRL_INT5      (0x00000020)
-+#define MCF_INTC_IPRL_INT6      (0x00000040)
-+#define MCF_INTC_IPRL_INT7      (0x00000080)
-+#define MCF_INTC_IPRL_INT8      (0x00000100)
-+#define MCF_INTC_IPRL_INT9      (0x00000200)
-+#define MCF_INTC_IPRL_INT10     (0x00000400)
-+#define MCF_INTC_IPRL_INT11     (0x00000800)
-+#define MCF_INTC_IPRL_INT12     (0x00001000)
-+#define MCF_INTC_IPRL_INT13     (0x00002000)
-+#define MCF_INTC_IPRL_INT14     (0x00004000)
-+#define MCF_INTC_IPRL_INT15     (0x00008000)
-+#define MCF_INTC_IPRL_INT16     (0x00010000)
-+#define MCF_INTC_IPRL_INT17     (0x00020000)
-+#define MCF_INTC_IPRL_INT18     (0x00040000)
-+#define MCF_INTC_IPRL_INT19     (0x00080000)
-+#define MCF_INTC_IPRL_INT20     (0x00100000)
-+#define MCF_INTC_IPRL_INT21     (0x00200000)
-+#define MCF_INTC_IPRL_INT22     (0x00400000)
-+#define MCF_INTC_IPRL_INT23     (0x00800000)
-+#define MCF_INTC_IPRL_INT24     (0x01000000)
-+#define MCF_INTC_IPRL_INT25     (0x02000000)
-+#define MCF_INTC_IPRL_INT26     (0x04000000)
-+#define MCF_INTC_IPRL_INT27     (0x08000000)
-+#define MCF_INTC_IPRL_INT28     (0x10000000)
-+#define MCF_INTC_IPRL_INT29     (0x20000000)
-+#define MCF_INTC_IPRL_INT30     (0x40000000)
-+#define MCF_INTC_IPRL_INT31     (0x80000000)
-+
-+/* Bit definitions and macros for IMRH */
-+#define MCF_INTC_IMRH_INT_MASK32    (0x00000001)
-+#define MCF_INTC_IMRH_INT_MASK33    (0x00000002)
-+#define MCF_INTC_IMRH_INT_MASK34    (0x00000004)
-+#define MCF_INTC_IMRH_INT_MASK35    (0x00000008)
-+#define MCF_INTC_IMRH_INT_MASK36    (0x00000010)
-+#define MCF_INTC_IMRH_INT_MASK37    (0x00000020)
-+#define MCF_INTC_IMRH_INT_MASK38    (0x00000040)
-+#define MCF_INTC_IMRH_INT_MASK39    (0x00000080)
-+#define MCF_INTC_IMRH_INT_MASK40    (0x00000100)
-+#define MCF_INTC_IMRH_INT_MASK41    (0x00000200)
-+#define MCF_INTC_IMRH_INT_MASK42    (0x00000400)
-+#define MCF_INTC_IMRH_INT_MASK43    (0x00000800)
-+#define MCF_INTC_IMRH_INT_MASK44    (0x00001000)
-+#define MCF_INTC_IMRH_INT_MASK45    (0x00002000)
-+#define MCF_INTC_IMRH_INT_MASK46    (0x00004000)
-+#define MCF_INTC_IMRH_INT_MASK47    (0x00008000)
-+#define MCF_INTC_IMRH_INT_MASK48    (0x00010000)
-+#define MCF_INTC_IMRH_INT_MASK49    (0x00020000)
-+#define MCF_INTC_IMRH_INT_MASK50    (0x00040000)
-+#define MCF_INTC_IMRH_INT_MASK51    (0x00080000)
-+#define MCF_INTC_IMRH_INT_MASK52    (0x00100000)
-+#define MCF_INTC_IMRH_INT_MASK53    (0x00200000)
-+#define MCF_INTC_IMRH_INT_MASK54    (0x00400000)
-+#define MCF_INTC_IMRH_INT_MASK55    (0x00800000)
-+#define MCF_INTC_IMRH_INT_MASK56    (0x01000000)
-+#define MCF_INTC_IMRH_INT_MASK57    (0x02000000)
-+#define MCF_INTC_IMRH_INT_MASK58    (0x04000000)
-+#define MCF_INTC_IMRH_INT_MASK59    (0x08000000)
-+#define MCF_INTC_IMRH_INT_MASK60    (0x10000000)
-+#define MCF_INTC_IMRH_INT_MASK61    (0x20000000)
-+#define MCF_INTC_IMRH_INT_MASK62    (0x40000000)
-+#define MCF_INTC_IMRH_INT_MASK63    (0x80000000)
-+
-+/* Bit definitions and macros for IMRL */
-+#define MCF_INTC_IMRL_INT_MASK0     (0x00000001)
-+#define MCF_INTC_IMRL_INT_MASK1     (0x00000002)
-+#define MCF_INTC_IMRL_INT_MASK2     (0x00000004)
-+#define MCF_INTC_IMRL_INT_MASK3     (0x00000008)
-+#define MCF_INTC_IMRL_INT_MASK4     (0x00000010)
-+#define MCF_INTC_IMRL_INT_MASK5     (0x00000020)
-+#define MCF_INTC_IMRL_INT_MASK6     (0x00000040)
-+#define MCF_INTC_IMRL_INT_MASK7     (0x00000080)
-+#define MCF_INTC_IMRL_INT_MASK8     (0x00000100)
-+#define MCF_INTC_IMRL_INT_MASK9     (0x00000200)
-+#define MCF_INTC_IMRL_INT_MASK10    (0x00000400)
-+#define MCF_INTC_IMRL_INT_MASK11    (0x00000800)
-+#define MCF_INTC_IMRL_INT_MASK12    (0x00001000)
-+#define MCF_INTC_IMRL_INT_MASK13    (0x00002000)
-+#define MCF_INTC_IMRL_INT_MASK14    (0x00004000)
-+#define MCF_INTC_IMRL_INT_MASK15    (0x00008000)
-+#define MCF_INTC_IMRL_INT_MASK16    (0x00010000)
-+#define MCF_INTC_IMRL_INT_MASK17    (0x00020000)
-+#define MCF_INTC_IMRL_INT_MASK18    (0x00040000)
-+#define MCF_INTC_IMRL_INT_MASK19    (0x00080000)
-+#define MCF_INTC_IMRL_INT_MASK20    (0x00100000)
-+#define MCF_INTC_IMRL_INT_MASK21    (0x00200000)
-+#define MCF_INTC_IMRL_INT_MASK22    (0x00400000)
-+#define MCF_INTC_IMRL_INT_MASK23    (0x00800000)
-+#define MCF_INTC_IMRL_INT_MASK24    (0x01000000)
-+#define MCF_INTC_IMRL_INT_MASK25    (0x02000000)
-+#define MCF_INTC_IMRL_INT_MASK26    (0x04000000)
-+#define MCF_INTC_IMRL_INT_MASK27    (0x08000000)
-+#define MCF_INTC_IMRL_INT_MASK28    (0x10000000)
-+#define MCF_INTC_IMRL_INT_MASK29    (0x20000000)
-+#define MCF_INTC_IMRL_INT_MASK30    (0x40000000)
-+#define MCF_INTC_IMRL_INT_MASK31    (0x80000000)
-+
-+/* Bit definitions and macros for INTFRCH */
-+#define MCF_INTC_INTFRCH_INTFRC32   (0x00000001)
-+#define MCF_INTC_INTFRCH_INTFRC33   (0x00000002)
-+#define MCF_INTC_INTFRCH_INTFRC34   (0x00000004)
-+#define MCF_INTC_INTFRCH_INTFRC35   (0x00000008)
-+#define MCF_INTC_INTFRCH_INTFRC36   (0x00000010)
-+#define MCF_INTC_INTFRCH_INTFRC37   (0x00000020)
-+#define MCF_INTC_INTFRCH_INTFRC38   (0x00000040)
-+#define MCF_INTC_INTFRCH_INTFRC39   (0x00000080)
-+#define MCF_INTC_INTFRCH_INTFRC40   (0x00000100)
-+#define MCF_INTC_INTFRCH_INTFRC41   (0x00000200)
-+#define MCF_INTC_INTFRCH_INTFRC42   (0x00000400)
-+#define MCF_INTC_INTFRCH_INTFRC43   (0x00000800)
-+#define MCF_INTC_INTFRCH_INTFRC44   (0x00001000)
-+#define MCF_INTC_INTFRCH_INTFRC45   (0x00002000)
-+#define MCF_INTC_INTFRCH_INTFRC46   (0x00004000)
-+#define MCF_INTC_INTFRCH_INTFRC47   (0x00008000)
-+#define MCF_INTC_INTFRCH_INTFRC48   (0x00010000)
-+#define MCF_INTC_INTFRCH_INTFRC49   (0x00020000)
-+#define MCF_INTC_INTFRCH_INTFRC50   (0x00040000)
-+#define MCF_INTC_INTFRCH_INTFRC51   (0x00080000)
-+#define MCF_INTC_INTFRCH_INTFRC52   (0x00100000)
-+#define MCF_INTC_INTFRCH_INTFRC53   (0x00200000)
-+#define MCF_INTC_INTFRCH_INTFRC54   (0x00400000)
-+#define MCF_INTC_INTFRCH_INTFRC55   (0x00800000)
-+#define MCF_INTC_INTFRCH_INTFRC56   (0x01000000)
-+#define MCF_INTC_INTFRCH_INTFRC57   (0x02000000)
-+#define MCF_INTC_INTFRCH_INTFRC58   (0x04000000)
-+#define MCF_INTC_INTFRCH_INTFRC59   (0x08000000)
-+#define MCF_INTC_INTFRCH_INTFRC60   (0x10000000)
-+#define MCF_INTC_INTFRCH_INTFRC61   (0x20000000)
-+#define MCF_INTC_INTFRCH_INTFRC62   (0x40000000)
-+#define MCF_INTC_INTFRCH_INTFRC63   (0x80000000)
-+
-+/* Bit definitions and macros for INTFRCL */
-+#define MCF_INTC_INTFRCL_INTFRC0    (0x00000001)
-+#define MCF_INTC_INTFRCL_INTFRC1    (0x00000002)
-+#define MCF_INTC_INTFRCL_INTFRC2    (0x00000004)
-+#define MCF_INTC_INTFRCL_INTFRC3    (0x00000008)
-+#define MCF_INTC_INTFRCL_INTFRC4    (0x00000010)
-+#define MCF_INTC_INTFRCL_INTFRC5    (0x00000020)
-+#define MCF_INTC_INTFRCL_INTFRC6    (0x00000040)
-+#define MCF_INTC_INTFRCL_INTFRC7    (0x00000080)
-+#define MCF_INTC_INTFRCL_INTFRC8    (0x00000100)
-+#define MCF_INTC_INTFRCL_INTFRC9    (0x00000200)
-+#define MCF_INTC_INTFRCL_INTFRC10   (0x00000400)
-+#define MCF_INTC_INTFRCL_INTFRC11   (0x00000800)
-+#define MCF_INTC_INTFRCL_INTFRC12   (0x00001000)
-+#define MCF_INTC_INTFRCL_INTFRC13   (0x00002000)
-+#define MCF_INTC_INTFRCL_INTFRC14   (0x00004000)
-+#define MCF_INTC_INTFRCL_INTFRC15   (0x00008000)
-+#define MCF_INTC_INTFRCL_INTFRC16   (0x00010000)
-+#define MCF_INTC_INTFRCL_INTFRC17   (0x00020000)
-+#define MCF_INTC_INTFRCL_INTFRC18   (0x00040000)
-+#define MCF_INTC_INTFRCL_INTFRC19   (0x00080000)
-+#define MCF_INTC_INTFRCL_INTFRC20   (0x00100000)
-+#define MCF_INTC_INTFRCL_INTFRC21   (0x00200000)
-+#define MCF_INTC_INTFRCL_INTFRC22   (0x00400000)
-+#define MCF_INTC_INTFRCL_INTFRC23   (0x00800000)
-+#define MCF_INTC_INTFRCL_INTFRC24   (0x01000000)
-+#define MCF_INTC_INTFRCL_INTFRC25   (0x02000000)
-+#define MCF_INTC_INTFRCL_INTFRC26   (0x04000000)
-+#define MCF_INTC_INTFRCL_INTFRC27   (0x08000000)
-+#define MCF_INTC_INTFRCL_INTFRC28   (0x10000000)
-+#define MCF_INTC_INTFRCL_INTFRC29   (0x20000000)
-+#define MCF_INTC_INTFRCL_INTFRC30   (0x40000000)
-+#define MCF_INTC_INTFRCL_INTFRC31   (0x80000000)
-+
-+/* Bit definitions and macros for ICONFIG */
-+#define MCF_INTC_ICONFIG_EMASK      (0x0020)
-+#define MCF_INTC_ICONFIG_ELVLPRI1   (0x0200)
-+#define MCF_INTC_ICONFIG_ELVLPRI2   (0x0400)
-+#define MCF_INTC_ICONFIG_ELVLPRI3   (0x0800)
-+#define MCF_INTC_ICONFIG_ELVLPRI4   (0x1000)
-+#define MCF_INTC_ICONFIG_ELVLPRI5   (0x2000)
-+#define MCF_INTC_ICONFIG_ELVLPRI6   (0x4000)
-+#define MCF_INTC_ICONFIG_ELVLPRI7   (0x8000)
-+
-+/* Bit definitions and macros for SIMR */
-+#define MCF_INTC_SIMR_SIMR(x)   (((x)&0x7F))
-+
-+/* Bit definitions and macros for CIMR */
-+#define MCF_INTC_CIMR_CIMR(x)   (((x)&0x7F))
-+
-+/* Bit definitions and macros for CLMASK */
-+#define MCF_INTC_CLMASK_CLMASK(x)   (((x)&0x0F))
-+
-+/* Bit definitions and macros for SLMASK */
-+#define MCF_INTC_SLMASK_SLMASK(x)   (((x)&0x0F))
-+
-+/* Bit definitions and macros for ICR group */
-+#define MCF_INTC_ICR_IL(x)      (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR1 */
-+#define MCF_INTC_ICR1_IL(x)     (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR2 */
-+#define MCF_INTC_ICR2_IL(x)     (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR3 */
-+#define MCF_INTC_ICR3_IL(x)     (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR4 */
-+#define MCF_INTC_ICR4_IL(x)     (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR5 */
-+#define MCF_INTC_ICR5_IL(x)     (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR6 */
-+#define MCF_INTC_ICR6_IL(x)     (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR7 */
-+#define MCF_INTC_ICR7_IL(x)     (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR8 */
-+#define MCF_INTC_ICR8_IL(x)     (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR9 */
-+#define MCF_INTC_ICR9_IL(x)     (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR10 */
-+#define MCF_INTC_ICR10_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR11 */
-+#define MCF_INTC_ICR11_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR12 */
-+#define MCF_INTC_ICR12_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR13 */
-+#define MCF_INTC_ICR13_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR14 */
-+#define MCF_INTC_ICR14_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR15 */
-+#define MCF_INTC_ICR15_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR16 */
-+#define MCF_INTC_ICR16_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR17 */
-+#define MCF_INTC_ICR17_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR18 */
-+#define MCF_INTC_ICR18_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR19 */
-+#define MCF_INTC_ICR19_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR20 */
-+#define MCF_INTC_ICR20_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR21 */
-+#define MCF_INTC_ICR21_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR22 */
-+#define MCF_INTC_ICR22_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR23 */
-+#define MCF_INTC_ICR23_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR24 */
-+#define MCF_INTC_ICR24_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR25 */
-+#define MCF_INTC_ICR25_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR26 */
-+#define MCF_INTC_ICR26_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR27 */
-+#define MCF_INTC_ICR27_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR28 */
-+#define MCF_INTC_ICR28_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR29 */
-+#define MCF_INTC_ICR29_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR30 */
-+#define MCF_INTC_ICR30_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR31 */
-+#define MCF_INTC_ICR31_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR32 */
-+#define MCF_INTC_ICR32_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR33 */
-+#define MCF_INTC_ICR33_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR34 */
-+#define MCF_INTC_ICR34_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR35 */
-+#define MCF_INTC_ICR35_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR36 */
-+#define MCF_INTC_ICR36_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR37 */
-+#define MCF_INTC_ICR37_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR38 */
-+#define MCF_INTC_ICR38_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR39 */
-+#define MCF_INTC_ICR39_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR40 */
-+#define MCF_INTC_ICR40_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR41 */
-+#define MCF_INTC_ICR41_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR42 */
-+#define MCF_INTC_ICR42_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR43 */
-+#define MCF_INTC_ICR43_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR44 */
-+#define MCF_INTC_ICR44_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR45 */
-+#define MCF_INTC_ICR45_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR46 */
-+#define MCF_INTC_ICR46_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR47 */
-+#define MCF_INTC_ICR47_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR48 */
-+#define MCF_INTC_ICR48_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR49 */
-+#define MCF_INTC_ICR49_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR50 */
-+#define MCF_INTC_ICR50_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR51 */
-+#define MCF_INTC_ICR51_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR52 */
-+#define MCF_INTC_ICR52_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR53 */
-+#define MCF_INTC_ICR53_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR54 */
-+#define MCF_INTC_ICR54_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR55 */
-+#define MCF_INTC_ICR55_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR56 */
-+#define MCF_INTC_ICR56_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR57 */
-+#define MCF_INTC_ICR57_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR58 */
-+#define MCF_INTC_ICR58_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR59 */
-+#define MCF_INTC_ICR59_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR60 */
-+#define MCF_INTC_ICR60_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR61 */
-+#define MCF_INTC_ICR61_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR62 */
-+#define MCF_INTC_ICR62_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for ICR63 */
-+#define MCF_INTC_ICR63_IL(x)    (((x)&0x07))
-+
-+/* Bit definitions and macros for SWIACK */
-+#define MCF_INTC_SWIACK_VECTOR(x)   (x)
-+
-+/* Bit definitions and macros for LIACK group */
-+#define MCF_INTC_LIACK_VECTOR(x)    (x)
-+
-+/* Bit definitions and macros for L1IACK */
-+#define MCF_INTC_L1IACK_VECTOR(x)   (x)
-+
-+/* Bit definitions and macros for L2IACK */
-+#define MCF_INTC_L2IACK_VECTOR(x)   (x)
-+
-+/* Bit definitions and macros for L3IACK */
-+#define MCF_INTC_L3IACK_VECTOR(x)   (x)
-+
-+/* Bit definitions and macros for L4IACK */
-+#define MCF_INTC_L4IACK_VECTOR(x)   (x)
-+
-+/* Bit definitions and macros for L5IACK */
-+#define MCF_INTC_L5IACK_VECTOR(x)   (x)
-+
-+/* Bit definitions and macros for L6IACK */
-+#define MCF_INTC_L6IACK_VECTOR(x)   (x)
-+
-+/* Bit definitions and macros for L7IACK */
-+#define MCF_INTC_L7IACK_VECTOR(x)   (x)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_INTC_H__ */
---- /dev/null
-+++ b/include/asm-m68k/mcf5445x_pciarb.h
-@@ -0,0 +1,40 @@
-+/*
-+ * Kurt Mahan kmahan@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_PCIARB_H__
-+#define __MCF5445X_PCIARB_H__
-+
-+/*********************************************************************
-+*
-+* PCI Arbiter Module (PCIARB)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_PCIARB_PACR         	MCF_REG32(0xFC0AC000)
-+#define MCF_PCIARB_PASR         	MCF_REG32(0xFC0AC004)
-+
-+/* Bit definitions and macros for PACR */
-+#define MCF_PCIARB_PACR_INTMPRI         (0x00000001)
-+#define MCF_PCIARB_PACR_EXTMPRI(x)      (((x)&0x0000001F)<<1)
-+#define MCF_PCIARB_PACR_RA              (0x00008000)
-+#define MCF_PCIARB_PACR_INTMINTEN       (0x00010000)
-+#define MCF_PCIARB_PACR_EXTMINTEN(x)    (((x)&0x0000001F)<<17)
-+#define MCF_PCIARB_PACR_PKMD            (0x40000000)
-+#define MCF_PCIARB_PACR_DS              (0x80000000)
-+
-+/* Bit definitions and macros for PASR */
-+#define MCF_PCIARB_PASR_ITLMBK      	(0x00010000)
-+#define MCF_PCIARB_PASR_EXTMBK(x)   	(((x)&0x0000001F)<<17)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_PCIARB_H__ */
---- /dev/null
-+++ b/include/asm-m68k/mcf5445x_pci.h
-@@ -0,0 +1,238 @@
-+/*
-+ * Kurt Mahan kmahan@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_PCI_H__
-+#define __MCF5445X_PCI_H__
-+
-+/*********************************************************************
-+*
-+* PCI Bus Controller (PCI)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_PCI_PCIIDR          MCF_REG32(0xFC0A8000)
-+#define MCF_PCI_PCISCR          MCF_REG32(0xFC0A8004)
-+#define MCF_PCI_PCICCRIR        MCF_REG32(0xFC0A8008)
-+#define MCF_PCI_PCICR1          MCF_REG32(0xFC0A800C)
-+#define MCF_PCI_PCIBAR0         MCF_REG32(0xFC0A8010)
-+#define MCF_PCI_PCIBAR1         MCF_REG32(0xFC0A8014)
-+#define MCF_PCI_PCIBAR2         MCF_REG32(0xFC0A8018)
-+#define MCF_PCI_PCIBAR3         MCF_REG32(0xFC0A801C)
-+#define MCF_PCI_PCIBAR4         MCF_REG32(0xFC0A8020)
-+#define MCF_PCI_PCIBAR5         MCF_REG32(0xFC0A8024)
-+#define MCF_PCI_PCISID          MCF_REG32(0xFC0A802C)
-+#define MCF_PCI_PCICR2          MCF_REG32(0xFC0A803C)
-+#define MCF_PCI_PCIGSCR         MCF_REG32(0xFC0A8060)
-+#define MCF_PCI_PCITBATR0A      MCF_REG32(0xFC0A8064)
-+#define MCF_PCI_PCITBATR1A      MCF_REG32(0xFC0A8068)
-+#define MCF_PCI_PCITCR          MCF_REG32(0xFC0A806C)
-+#define MCF_PCI_PCIIW0BTAR      MCF_REG32(0xFC0A8070)
-+#define MCF_PCI_PCIIW1BTAR      MCF_REG32(0xFC0A8074)
-+#define MCF_PCI_PCIIW2BTAR      MCF_REG32(0xFC0A8078)
-+#define MCF_PCI_PCIIWCR         MCF_REG32(0xFC0A8080)
-+#define MCF_PCI_PCIICR          MCF_REG32(0xFC0A8084)
-+#define MCF_PCI_PCIISR          MCF_REG32(0xFC0A8088)
-+#define MCF_PCI_PCITCR2         MCF_REG32(0xFC0A808C)
-+#define MCF_PCI_PCITBATR0       MCF_REG32(0xFC0A8090)
-+#define MCF_PCI_PCITBATR1       MCF_REG32(0xFC0A8094)
-+#define MCF_PCI_PCITBATR2       MCF_REG32(0xFC0A8098)
-+#define MCF_PCI_PCITBATR3       MCF_REG32(0xFC0A809C)
-+#define MCF_PCI_PCITBATR4       MCF_REG32(0xFC0A80A0)
-+#define MCF_PCI_PCITBATR5       MCF_REG32(0xFC0A80A4)
-+#define MCF_PCI_PCICAR          MCF_REG32(0xFC0A80F8)
-+
-+/* Parameterized register read/write macros for multiple registers */
-+#define MCF_PCI_PCIIWBTAR(x)    MCF_REG32(0xFC0A8070+((x)*0x004))
-+
-+/* Bit definitions and macros for PCIIDR */
-+#define MCF_PCI_PCIIDR_VENDORID(x)      (((x)&0x0000FFFF))
-+#define MCF_PCI_PCIIDR_DEVICEID(x)      (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for PCISCR */
-+#define MCF_PCI_PCISCR_M        (0x00000002)
-+#define MCF_PCI_PCISCR_B        (0x00000004)
-+#define MCF_PCI_PCISCR_SP       (0x00000008)
-+#define MCF_PCI_PCISCR_MW       (0x00000010)
-+#define MCF_PCI_PCISCR_PER      (0x00000040)
-+#define MCF_PCI_PCISCR_S        (0x00000100)
-+#define MCF_PCI_PCISCR_F        (0x00000200)
-+#define MCF_PCI_PCISCR_C        (0x00100000)
-+#define MCF_PCI_PCISCR_66M      (0x00200000)
-+#define MCF_PCI_PCISCR_R        (0x00400000)
-+#define MCF_PCI_PCISCR_FC       (0x00800000)
-+#define MCF_PCI_PCISCR_DP       (0x01000000)
-+#define MCF_PCI_PCISCR_DT(x)    (((x)&0x00000003)<<25)
-+#define MCF_PCI_PCISCR_TS       (0x08000000)
-+#define MCF_PCI_PCISCR_TR       (0x10000000)
-+#define MCF_PCI_PCISCR_MA       (0x20000000)
-+#define MCF_PCI_PCISCR_SE       (0x40000000)
-+#define MCF_PCI_PCISCR_PE       (0x80000000)
-+
-+/* Bit definitions and macros for PCICCRIR */
-+#define MCF_PCI_PCICCRIR_REVID(x)       (((x)&0x000000FF))
-+#define MCF_PCI_PCICCRIR_CLASSCODE(x)   (((x)&0x00FFFFFF)<<8)
-+
-+/* Bit definitions and macros for PCICR1 */
-+#define MCF_PCI_PCICR1_CACHELINESIZE(x)     (((x)&0x0000000F))
-+#define MCF_PCI_PCICR1_LATTIMER(x)          (((x)&0x000000FF)<<8)
-+#define MCF_PCI_PCICR1_HEADERTYPE(x)        (((x)&0x000000FF)<<16)
-+#define MCF_PCI_PCICR1_BIST(x)              (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for PCIBAR0 */
-+#define MCF_PCI_PCIBAR0_IO          (0x00000001)
-+#define MCF_PCI_PCIBAR0_RANGE(x)    (((x)&0x00000003)<<1)
-+#define MCF_PCI_PCIBAR0_PREF        (0x00000008)
-+#define MCF_PCI_PCIBAR0_BAR0(x)     (((x)&0x00003FFF)<<18)
-+
-+/* Bit definitions and macros for PCIBAR1 */
-+#define MCF_PCI_PCIBAR1_IO          (0x00000001)
-+#define MCF_PCI_PCIBAR1_PREF        (0x00000008)
-+#define MCF_PCI_PCIBAR1_BAR1(x)     (((x)&0x00000FFF)<<20)
-+
-+/* Bit definitions and macros for PCIBAR2 */
-+#define MCF_PCI_PCIBAR2_IO          (0x00000001)
-+#define MCF_PCI_PCIBAR2_RANGE(x)    (((x)&0x00000003)<<1)
-+#define MCF_PCI_PCIBAR2_PREF        (0x00000008)
-+#define MCF_PCI_PCIBAR2_BAR2(x)     (((x)&0x000003FF)<<22)
-+
-+/* Bit definitions and macros for PCIBAR3 */
-+#define MCF_PCI_PCIBAR3_IO          (0x00000001)
-+#define MCF_PCI_PCIBAR3_PREF        (0x00000008)
-+#define MCF_PCI_PCIBAR3_BAR3(x)     (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for PCIBAR4 */
-+#define MCF_PCI_PCIBAR4_IO          (0x00000001)
-+#define MCF_PCI_PCIBAR4_RANGE(x)    (((x)&0x00000003)<<1)
-+#define MCF_PCI_PCIBAR4_PREF        (0x00000008)
-+#define MCF_PCI_PCIBAR4_BAR4(x)     (((x)&0x0000001F)<<27)
-+
-+/* Bit definitions and macros for PCIBAR5 */
-+#define MCF_PCI_PCIBAR5_IO          (0x00000001)
-+#define MCF_PCI_PCIBAR5_PREF        (0x00000008)
-+#define MCF_PCI_PCIBAR5_BAR5(x)     (((x)&0x0000000F)<<28)
-+
-+/* Bit definitions and macros for PCISID */
-+#define MCF_PCI_PCISID_VENDORID(x)      (((x)&0x0000FFFF))
-+#define MCF_PCI_PCISID_ID(x)            (((x)&0x0000FFFF)<<16)
-+
-+/* Bit definitions and macros for PCICR2 */
-+#define MCF_PCI_PCICR2_INTLINE(x)   (((x)&0x000000FF))
-+#define MCF_PCI_PCICR2_INTPIN(x)    (((x)&0x000000FF)<<8)
-+#define MCF_PCI_PCICR2_MINGNT(x)    (((x)&0x000000FF)<<16)
-+#define MCF_PCI_PCICR2_MAXLAT(x)    (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for PCIGSCR */
-+#define MCF_PCI_PCIGSCR_PR      (0x00000001)
-+#define MCF_PCI_PCIGSCR_SEE     (0x00001000)
-+#define MCF_PCI_PCIGSCR_PEE     (0x00002000)
-+#define MCF_PCI_PCIGSCR_SE      (0x10000000)
-+#define MCF_PCI_PCIGSCR_PE      (0x20000000)
-+
-+/* Bit definitions and macros for PCITBATR0A */
-+#define MCF_PCI_PCITBATR0A_EN           (0x00000001)
-+#define MCF_PCI_PCITBATR0A_BAT0(x)      (((x)&0x00003FFF)<<18)
-+
-+/* Bit definitions and macros for PCITBATR1A */
-+#define MCF_PCI_PCITBATR1A_EN           (0x00000001)
-+#define MCF_PCI_PCITBATR1A_BAT1(x)      (((x)&0x00000FFF)<<20)
-+
-+/* Bit definitions and macros for PCITCR */
-+#define MCF_PCI_PCITCR_WCT(x)   (((x)&0x000000FF))
-+#define MCF_PCI_PCITCR_WCD      (0x00000100)
-+#define MCF_PCI_PCITCR_P        (0x00010000)
-+#define MCF_PCI_PCITCR_PID      (0x00020000)
-+#define MCF_PCI_PCITCR_LD       (0x01000000)
-+
-+/* Bit definitions and macros for PCIIWBTAR group */
-+#define MCF_PCI_PCIIWBTAR_WBA(x)    ((((x)&0xFF000000)))
-+#define MCF_PCI_PCIIWBTAR_WAM(x)    ((((x)&0xFF000000)
-+#define MCF_PCI_PCIIWBTAR_WTA(x)    ((((x)&0xFF000000)
-+
-+/* Bit definitions and macros for PCIIW0BTAR */
-+#define MCF_PCI_PCIIW0BTAR_WBA(x)   ((((x)&0xFF000000)))
-+#define MCF_PCI_PCIIW0BTAR_WAM(x)   ((((x)&0xFF000000)
-+#define MCF_PCI_PCIIW0BTAR_WTA(x)   ((((x)&0xFF000000)
-+
-+/* Bit definitions and macros for PCIIWCR */
-+#define MCF_PCI_PCIIWCR_WINCTRL2(x)             (((x)&0x0000000F)<<8)
-+#define MCF_PCI_PCIIWCR_WINCTRL1(x)             (((x)&0x0000000F)<<16)
-+#define MCF_PCI_PCIIWCR_WINCTRL0(x)             (((x)&0x0000000F)<<24)
-+#define MCF_PCI_PCIIWCR_WINCTRL0_ENABLE         (0x01000000)
-+#define MCF_PCI_PCIIWCR_WINCTRL0_MEMREAD        (0x01000000)
-+#define MCF_PCI_PCIIWCR_WINCTRL0_MEMRDLINE      (0x03000000)
-+#define MCF_PCI_PCIIWCR_WINCTRL0_MEMRDMUL       (0x05000000)
-+#define MCF_PCI_PCIIWCR_WINCTRL0_IO             (0x09000000)
-+#define MCF_PCI_PCIIWCR_WINCTRL1_MEMREAD        (0x00010000)
-+#define MCF_PCI_PCIIWCR_WINCTRL1_ENABLE         (0x00010000)
-+#define MCF_PCI_PCIIWCR_WINCTRL1_MEMRDLINE      (0x00030000)
-+#define MCF_PCI_PCIIWCR_WINCTRL1_MEMRDMUL       (0x00050000)
-+#define MCF_PCI_PCIIWCR_WINCTRL1_IO             (0x00090000)
-+#define MCF_PCI_PCIIWCR_WINCTRL2_ENABLE         (0x00000100)
-+#define MCF_PCI_PCIIWCR_WINCTRL2_MEMREAD        (0x00000100)
-+#define MCF_PCI_PCIIWCR_WINCTRL2_MEMRDLINE      (0x00000300)
-+#define MCF_PCI_PCIIWCR_WINCTRL2_MEMRDMUL       (0x00000500)
-+#define MCF_PCI_PCIIWCR_WINCTRL2_IO             (0x00000900)
-+
-+/* Bit definitions and macros for PCIICR */
-+#define MCF_PCI_PCIICR_MAXRETRY(x)      (((x)&0x000000FF))
-+#define MCF_PCI_PCIICR_TAE              (0x01000000)
-+#define MCF_PCI_PCIICR_IAE              (0x02000000)
-+#define MCF_PCI_PCIICR_REE              (0x04000000)
-+
-+/* Bit definitions and macros for PCIISR */
-+#define MCF_PCI_PCIISR_TA       (0x01000000)
-+#define MCF_PCI_PCIISR_IA       (0x02000000)
-+#define MCF_PCI_PCIISR_RE       (0x04000000)
-+
-+/* Bit definitions and macros for PCITCR2 */
-+#define MCF_PCI_PCITCR2_CR      (0x00000001)
-+#define MCF_PCI_PCITCR2_B0E     (0x00000100)
-+#define MCF_PCI_PCITCR2_B1E     (0x00000200)
-+#define MCF_PCI_PCITCR2_B2E     (0x00000400)
-+#define MCF_PCI_PCITCR2_B3E     (0x00000800)
-+#define MCF_PCI_PCITCR2_B4E     (0x00001000)
-+#define MCF_PCI_PCITCR2_B5E     (0x00002000)
-+
-+/* Bit definitions and macros for PCITBATR0 */
-+#define MCF_PCI_PCITBATR0_EN        (0x00000001)
-+#define MCF_PCI_PCITBATR0_BAT0(x)   (((x)&0x00003FFF)<<18)
-+
-+/* Bit definitions and macros for PCITBATR1 */
-+#define MCF_PCI_PCITBATR1_EN        (0x00000001)
-+#define MCF_PCI_PCITBATR1_BAT1(x)   (((x)&0x00000FFF)<<20)
-+
-+/* Bit definitions and macros for PCITBATR2 */
-+#define MCF_PCI_PCITBATR2_EN        (0x00000001)
-+#define MCF_PCI_PCITBATR2_BAT2(x)   (((x)&0x000003FF)<<22)
-+
-+/* Bit definitions and macros for PCITBATR3 */
-+#define MCF_PCI_PCITBATR3_EN        (0x00000001)
-+#define MCF_PCI_PCITBATR3_BAT3(x)   (((x)&0x000000FF)<<24)
-+
-+/* Bit definitions and macros for PCITBATR4 */
-+#define MCF_PCI_PCITBATR4_EN        (0x00000001)
-+#define MCF_PCI_PCITBATR4_BAT4(x)   (((x)&0x0000001F)<<27)
-+
-+/* Bit definitions and macros for PCITBATR5 */
-+#define MCF_PCI_PCITBATR5_EN        (0x00000001)
-+#define MCF_PCI_PCITBATR5_BAT5(x)   (((x)&0x0000000F)<<28)
-+
-+/* Bit definitions and macros for PCICAR */
-+#define MCF_PCI_PCICAR_DWORD(x)     ((x)&0x000000FC)
-+#define MCF_PCI_PCICAR_FUNCNUM(x)   (((x)&0x00000007)<<8)
-+#define MCF_PCI_PCICAR_DEVNUM(x)    (((x)&0x0000001F)<<11)
-+#define MCF_PCI_PCICAR_BUSNUM(x)    (((x)&0x000000FF)<<16)
-+#define MCF_PCI_PCICAR_E            (0x80000000)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_PCI_H__ */
---- /dev/null
-+++ b/include/asm-m68k/mcf5445x_sdramc.h
-@@ -0,0 +1,115 @@
-+/*
-+ * Matt Waddel Matt.Waddel@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_SDRAMC_H__
-+#define __MCF5445X_SDRAMC_H__
-+
-+/*********************************************************************
-+*
-+* SDRAM Controller (SDRAMC)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_SDRAMC_SDMR         (*(vuint32 *)(0xFC0B8000))   /* SDRAM Mode/Extended Mode Register */
-+#define MCF_SDRAMC_SDCR         (*(vuint32 *)(0xFC0B8004))   /* SDRAM Control Register */
-+#define MCF_SDRAMC_SDCFG1       (*(vuint32 *)(0xFC0B8008))   /* SDRAM Configuration Register 1 */
-+#define MCF_SDRAMC_SDCFG2       (*(vuint32 *)(0xFC0B800C))   /* SDRAM Configuration Register 2 */
-+#define MCF_SDRAMC_SDCS0        (*(vuint32 *)(0xFC0B8110))   /* SDRAM Chip Select Register */
-+#define MCF_SDRAMC_SDCS1        (*(vuint32 *)(0xFC0B8114))   /* SDRAM Chip Select Register */
-+
-+/* Parameterized register read/write macros for multiple registers */
-+#define MCF_SDRAMC_SDCS(x)      (*(vuint32 *)(0xFC0B8110+((x)*0x004)))   /* SDRAM Chip Select Register */
-+
-+/* Bit definitions and macros for SDMR */
-+#define MCF_SDRAMC_SDMR_DDR2_AD(x)      (((x)&0x00003FFF))      /* Address for DDR2 */
-+#define MCF_SDRAMC_SDMR_CMD             (0x00010000)            /* Command */
-+#define MCF_SDRAMC_SDMR_AD(x)           (((x)&0x00000FFF)<<18)  /* Address */
-+#define MCF_SDRAMC_SDMR_BK(x)           (((x)&0x00000003)<<30)  /* Bank Address */
-+#define MCF_SDRAMC_SDMR_BK_LMR          (0x00000000)
-+#define MCF_SDRAMC_SDMR_BK_LEMR         (0x40000000)
-+
-+/* Bit definitions and macros for SDCR */
-+#define MCF_SDRAMC_SDCR_DPD             (0x00000001)            /* Deep Power-Down Mode */
-+#define MCF_SDRAMC_SDCR_IPALL           (0x00000002)            /* Initiate Precharge All */
-+#define MCF_SDRAMC_SDCR_IREF            (0x00000004)            /* Initiate Refresh */
-+#define MCF_SDRAMC_SDCR_DQS_OE(x)       (((x)&0x00000003)<<10)  /* DQS Output Enable */
-+#define MCF_SDRAMC_SDCR_MEM_PS          (0x00002000)            /* Data Port Size */
-+#define MCF_SDRAMC_SDCR_REF_CNT(x)      (((x)&0x0000003F)<<16)  /* Periodic Refresh Counter */
-+#define MCF_SDRAMC_SDCR_OE_RULE         (0x00400000)            /* Drive Rule Selection */
-+#define MCF_SDRAMC_SDCR_ADDR_MUX(x)     (((x)&0x00000003)<<24)  /* Internal Address Mux Select */
-+#define MCF_SDRAMC_SDCR_DDR2_MODE       (0x08000000)            /* DDR2 Mode Select */
-+#define MCF_SDRAMC_SDCR_REF_EN          (0x10000000)            /* Refresh Enable */
-+#define MCF_SDRAMC_SDCR_DDR_MODE        (0x20000000)            /* DDR Mode Select */
-+#define MCF_SDRAMC_SDCR_CKE             (0x40000000)            /* Clock Enable */
-+#define MCF_SDRAMC_SDCR_MODE_EN         (0x80000000)            /* SDRAM Mode Register Programming Enable */
-+#define MCF_SDRAMC_SDCR_DQS_OE_BOTH     (0x00000C00)
-+
-+/* Bit definitions and macros for SDCFG1 */
-+#define MCF_SDRAMC_SDCFG1_WT_LAT(x)     (((x)&0x00000007)<<4)   /* Write Latency */
-+#define MCF_SDRAMC_SDCFG1_REF2ACT(x)    (((x)&0x0000000F)<<8)   /* Refresh to active delay */
-+#define MCF_SDRAMC_SDCFG1_PRE2ACT(x)    (((x)&0x00000007)<<12)  /* Precharge to active delay */
-+#define MCF_SDRAMC_SDCFG1_ACT2RW(x)     (((x)&0x00000007)<<16)  /* Active to read/write delay */
-+#define MCF_SDRAMC_SDCFG1_RD_LAT(x)     (((x)&0x0000000F)<<20)  /* Read CAS Latency */
-+#define MCF_SDRAMC_SDCFG1_SWT2RWP(x)    (((x)&0x00000007)<<24)  /* Single write to read/write/precharge delay */
-+#define MCF_SDRAMC_SDCFG1_SRD2RWP(x)    (((x)&0x0000000F)<<28)  /* Single read to read/write/precharge delay */
-+
-+/* Bit definitions and macros for SDCFG2 */
-+#define MCF_SDRAMC_SDCFG2_BL(x)         (((x)&0x0000000F)<<16)  /* Burst Length */
-+#define MCF_SDRAMC_SDCFG2_BRD2W(x)      (((x)&0x0000000F)<<20)  /* Burst read to write delay */
-+#define MCF_SDRAMC_SDCFG2_BWT2RWP(x)    (((x)&0x0000000F)<<24)  /* Burst write to read/write/precharge delay */
-+#define MCF_SDRAMC_SDCFG2_BRD2RP(x)     (((x)&0x0000000F)<<28)  /* Burst read to read/precharge delay */
-+
-+/* Bit definitions and macros for SDCS group */
-+#define MCF_SDRAMC_SDCS_CSSZ(x)         (((x)&0x0000001F))      /* Chip-Select Size */
-+#define MCF_SDRAMC_SDCS_CSBA(x)         (((x)&0x00000FFF)<<20)  /* Chip-Select Base Address */
-+#define MCF_SDRAMC_SDCS_BA(x)           ((x)&0xFFF00000)
-+#define MCF_SDRAMC_SDCS_CSSZ_DISABLE    (0x00000000)
-+#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE     (0x00000013)
-+#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE     (0x00000014)
-+#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE     (0x00000015)
-+#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE     (0x00000016)
-+#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE    (0x00000017)
-+#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE    (0x00000018)
-+#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE    (0x00000019)
-+#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE   (0x0000001A)
-+#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE   (0x0000001B)
-+#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE   (0x0000001C)
-+#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE     (0x0000001D)
-+#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE     (0x0000001E)
-+#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE     (0x0000001F)
-+
-+/* Bit definitions and macros for SDCS0 */
-+#define MCF_SDRAMC_SDCS0_CSSZ(x)            (((x)&0x0000001F))      /* Chip-Select Size */
-+#define MCF_SDRAMC_SDCS0_CSBA(x)            (((x)&0x00000FFF)<<20)  /* Chip-Select Base Address */
-+#define MCF_SDRAMC_SDCS0_BA(x)              ((x)&0xFFF00000)
-+#define MCF_SDRAMC_SDCS0_CSSZ_DISABLE       (0x00000000)
-+#define MCF_SDRAMC_SDCS0_CSSZ_1MBYTE        (0x00000013)
-+#define MCF_SDRAMC_SDCS0_CSSZ_2MBYTE        (0x00000014)
-+#define MCF_SDRAMC_SDCS0_CSSZ_4MBYTE        (0x00000015)
-+#define MCF_SDRAMC_SDCS0_CSSZ_8MBYTE        (0x00000016)
-+#define MCF_SDRAMC_SDCS0_CSSZ_16MBYTE       (0x00000017)
-+#define MCF_SDRAMC_SDCS0_CSSZ_32MBYTE       (0x00000018)
-+#define MCF_SDRAMC_SDCS0_CSSZ_64MBYTE       (0x00000019)
-+#define MCF_SDRAMC_SDCS0_CSSZ_128MBYTE      (0x0000001A)
-+#define MCF_SDRAMC_SDCS0_CSSZ_256MBYTE      (0x0000001B)
-+#define MCF_SDRAMC_SDCS0_CSSZ_512MBYTE      (0x0000001C)
-+#define MCF_SDRAMC_SDCS0_CSSZ_1GBYTE        (0x0000001D)
-+#define MCF_SDRAMC_SDCS0_CSSZ_2GBYTE        (0x0000001E)
-+#define MCF_SDRAMC_SDCS0_CSSZ_4GBYTE        (0x0000001F)
-+
-+/* Bit definitions and macros for SDCS1 */
-+#define MCF_SDRAMC_SDCS1_CSSZ(x)    (((x)&0x0000001F))      /* Chip-Select Size */
-+#define MCF_SDRAMC_SDCS1_CSBA(x)    (((x)&0x00000FFF)<<20)  /* Chip-Select Base Address */
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_SDRAMC_H__ */
---- /dev/null
-+++ b/include/asm-m68k/mcf5445x_ssi.h
-@@ -0,0 +1,187 @@
-+/*
-+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_SSI_H__
-+#define __MCF5445X_SSI_H__
-+
-+/*********************************************************************
-+*
-+* Synchronous Serial Interface (SSI)
-+*
-+*********************************************************************/
-+
-+/* Register read/write macros */
-+#define MCF_SSI_TX0             MCF_REG32(0xFC0BC000)
-+#define MCF_SSI_TX1             MCF_REG32(0xFC0BC004)
-+#define MCF_SSI_RX0             MCF_REG32(0xFC0BC008)
-+#define MCF_SSI_RX1             MCF_REG32(0xFC0BC00C)
-+#define MCF_SSI_CR              MCF_REG32(0xFC0BC010)
-+#define MCF_SSI_ISR             MCF_REG32(0xFC0BC014)
-+#define MCF_SSI_IER             MCF_REG32(0xFC0BC018)
-+#define MCF_SSI_TCR             MCF_REG32(0xFC0BC01C)
-+#define MCF_SSI_RCR             MCF_REG32(0xFC0BC020)
-+#define MCF_SSI_CCR             MCF_REG32(0xFC0BC024)
-+#define MCF_SSI_FCSR            MCF_REG32(0xFC0BC02C)
-+#define MCF_SSI_ACR             MCF_REG32(0xFC0BC038)
-+#define MCF_SSI_ACADD           MCF_REG32(0xFC0BC03C)
-+#define MCF_SSI_ACDAT           MCF_REG32(0xFC0BC040)
-+#define MCF_SSI_ATAG            MCF_REG32(0xFC0BC044)
-+#define MCF_SSI_TMASK           MCF_REG32(0xFC0BC048)
-+#define MCF_SSI_RMASK           MCF_REG32(0xFC0BC04C)
-+
-+/* Parameterized register read/write macros for multiple registers */
-+#define MCF_SSI_TX(x)           MCF_REG32(0xFC0BC000+((x)*0x004))
-+#define MCF_SSI_RX(x)           MCF_REG32(0xFC0BC008+((x)*0x004))
-+
-+/* Bit definitions and macros for TX group */
-+#define MCF_SSI_TX_SSI_TX(x)    (x)
-+
-+/* Bit definitions and macros for TX0 */
-+#define MCF_SSI_TX0_SSI_TX(x)   (x)
-+
-+/* Bit definitions and macros for TX1 */
-+#define MCF_SSI_TX1_SSI_TX(x)   (x)
-+
-+/* Bit definitions and macros for RX group */
-+#define MCF_SSI_RX_SSI_RX(x)    (x)
-+
-+/* Bit definitions and macros for RX0 */
-+#define MCF_SSI_RX0_SSI_RX(x)   (x)
-+
-+/* Bit definitions and macros for RX1 */
-+#define MCF_SSI_RX1_SSI_RX(x)   (x)
-+
-+/* Bit definitions and macros for CR */
-+#define MCF_SSI_CR_SSI_EN       (0x00000001)
-+#define MCF_SSI_CR_TE           (0x00000002)
-+#define MCF_SSI_CR_RE           (0x00000004)
-+#define MCF_SSI_CR_NET          (0x00000008)
-+#define MCF_SSI_CR_SYN          (0x00000010)
-+#define MCF_SSI_CR_I2S(x)       (((x)&0x00000003)<<5)
-+#define MCF_SSI_CR_MCE          (0x00000080)
-+#define MCF_SSI_CR_TCH          (0x00000100)
-+#define MCF_SSI_CR_CIS          (0x00000200)
-+#define MCF_SSI_CR_I2S_NORMAL   (0x00000000)
-+#define MCF_SSI_CR_I2S_MASTER   (0x00000020)
-+#define MCF_SSI_CR_I2S_SLAVE    (0x00000040)
-+
-+/* Bit definitions and macros for ISR */
-+#define MCF_SSI_ISR_TFE0        (0x00000001)
-+#define MCF_SSI_ISR_TFE1        (0x00000002)
-+#define MCF_SSI_ISR_RFF0        (0x00000004)
-+#define MCF_SSI_ISR_RFF1        (0x00000008)
-+#define MCF_SSI_ISR_RLS         (0x00000010)
-+#define MCF_SSI_ISR_TLS         (0x00000020)
-+#define MCF_SSI_ISR_RFS         (0x00000040)
-+#define MCF_SSI_ISR_TFS         (0x00000080)
-+#define MCF_SSI_ISR_TUE0        (0x00000100)
-+#define MCF_SSI_ISR_TUE1        (0x00000200)
-+#define MCF_SSI_ISR_ROE0        (0x00000400)
-+#define MCF_SSI_ISR_ROE1        (0x00000800)
-+#define MCF_SSI_ISR_TDE0        (0x00001000)
-+#define MCF_SSI_ISR_TDE1        (0x00002000)
-+#define MCF_SSI_ISR_RDR0        (0x00004000)
-+#define MCF_SSI_ISR_RDR1        (0x00008000)
-+#define MCF_SSI_ISR_RXT         (0x00010000)
-+#define MCF_SSI_ISR_CMDDU       (0x00020000)
-+#define MCF_SSI_ISR_CMDAU       (0x00040000)
-+
-+/* Bit definitions and macros for IER */
-+#define MCF_SSI_IER_TFE0        (0x00000001)
-+#define MCF_SSI_IER_TFE1        (0x00000002)
-+#define MCF_SSI_IER_RFF0        (0x00000004)
-+#define MCF_SSI_IER_RFF1        (0x00000008)
-+#define MCF_SSI_IER_RLS         (0x00000010)
-+#define MCF_SSI_IER_TLS         (0x00000020)
-+#define MCF_SSI_IER_RFS         (0x00000040)
-+#define MCF_SSI_IER_TFS         (0x00000080)
-+#define MCF_SSI_IER_TUE0        (0x00000100)
-+#define MCF_SSI_IER_TUE1        (0x00000200)
-+#define MCF_SSI_IER_ROE0        (0x00000400)
-+#define MCF_SSI_IER_ROE1        (0x00000800)
-+#define MCF_SSI_IER_TDE0        (0x00001000)
-+#define MCF_SSI_IER_TDE1        (0x00002000)
-+#define MCF_SSI_IER_RDR0        (0x00004000)
-+#define MCF_SSI_IER_RDR1        (0x00008000)
-+#define MCF_SSI_IER_RXT         (0x00010000)
-+#define MCF_SSI_IER_CMDU        (0x00020000)
-+#define MCF_SSI_IER_CMDAU       (0x00040000)
-+#define MCF_SSI_IER_TIE         (0x00080000)
-+#define MCF_SSI_IER_TDMAE       (0x00100000)
-+#define MCF_SSI_IER_RIE         (0x00200000)
-+#define MCF_SSI_IER_RDMAE       (0x00400000)
-+
-+/* Bit definitions and macros for TCR */
-+#define MCF_SSI_TCR_TEFS        (0x00000001)
-+#define MCF_SSI_TCR_TFSL        (0x00000002)
-+#define MCF_SSI_TCR_TFSI        (0x00000004)
-+#define MCF_SSI_TCR_TSCKP       (0x00000008)
-+#define MCF_SSI_TCR_TSHFD       (0x00000010)
-+#define MCF_SSI_TCR_TXDIR       (0x00000020)
-+#define MCF_SSI_TCR_TFDIR       (0x00000040)
-+#define MCF_SSI_TCR_TFEN0       (0x00000080)
-+#define MCF_SSI_TCR_TFEN1       (0x00000100)
-+#define MCF_SSI_TCR_TXBIT0      (0x00000200)
-+
-+/* Bit definitions and macros for RCR */
-+#define MCF_SSI_RCR_REFS        (0x00000001)
-+#define MCF_SSI_RCR_RFSL        (0x00000002)
-+#define MCF_SSI_RCR_RFSI        (0x00000004)
-+#define MCF_SSI_RCR_RSCKP       (0x00000008)
-+#define MCF_SSI_RCR_RSHFD       (0x00000010)
-+#define MCF_SSI_RCR_RFEN0       (0x00000080)
-+#define MCF_SSI_RCR_RFEN1       (0x00000100)
-+#define MCF_SSI_RCR_RXBIT0      (0x00000200)
-+#define MCF_SSI_RCR_RXEXT       (0x00000400)
-+
-+/* Bit definitions and macros for CCR */
-+#define MCF_SSI_CCR_PM(x)       (((x)&0x000000FF))
-+#define MCF_SSI_CCR_DC(x)       (((x)&0x0000001F)<<8)
-+#define MCF_SSI_CCR_WL(x)       (((x)&0x0000000F)<<13)
-+#define MCF_SSI_CCR_PSR         (0x00020000)
-+#define MCF_SSI_CCR_DIV2        (0x00040000)
-+
-+/* Bit definitions and macros for FCSR */
-+#define MCF_SSI_FCSR_TFWM0(x)       (((x)&0x0000000F))
-+#define MCF_SSI_FCSR_RFWM0(x)       (((x)&0x0000000F)<<4)
-+#define MCF_SSI_FCSR_TFCNT0(x)      (((x)&0x0000000F)<<8)
-+#define MCF_SSI_FCSR_RFCNT0(x)      (((x)&0x0000000F)<<12)
-+#define MCF_SSI_FCSR_TFWM1(x)       (((x)&0x0000000F)<<16)
-+#define MCF_SSI_FCSR_RFWM1(x)       (((x)&0x0000000F)<<20)
-+#define MCF_SSI_FCSR_TFCNT1(x)      (((x)&0x0000000F)<<24)
-+#define MCF_SSI_FCSR_RFCNT1(x)      (((x)&0x0000000F)<<28)
-+
-+/* Bit definitions and macros for ACR */
-+#define MCF_SSI_ACR_AC97EN      (0x00000001)
-+#define MCF_SSI_ACR_FV          (0x00000002)
-+#define MCF_SSI_ACR_TIF         (0x00000004)
-+#define MCF_SSI_ACR_RD          (0x00000008)
-+#define MCF_SSI_ACR_WR          (0x00000010)
-+#define MCF_SSI_ACR_FRDIV(x)    (((x)&0x0000003F)<<5)
-+
-+/* Bit definitions and macros for ACADD */
-+#define MCF_SSI_ACADD_SSI_ACADD(x)      (((x)&0x0007FFFF))
-+
-+/* Bit definitions and macros for ACDAT */
-+#define MCF_SSI_ACDAT_SSI_ACDAT(x)      (((x)&0x0007FFFF))
-+
-+/* Bit definitions and macros for ATAG */
-+#define MCF_SSI_ATAG_DDI_ATAG(x)    (((x)&0x0000FFFF))
-+
-+/* Bit definitions and macros for TMASK */
-+#define MCF_SSI_TMASK_SSI_TMASK(x)      (x)
-+
-+/* Bit definitions and macros for RMASK */
-+#define MCF_SSI_RMASK_SSI_RMASK(x)      (x)
-+
-+/********************************************************************/
-+
-+#endif /* __MCF5445X_SSI_H__ */
---- /dev/null
-+++ b/include/asm-m68k/mcf5445x_usb.h
-@@ -0,0 +1,50 @@
-+/*
-+ * Duck Schmid duck@freescale.com
-+ *
-+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+
-+/*
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+#include <asm/mcfsim.h>
-+
-+/* ehci_arc_hc_driver.flags value */
-+#define FSL_PLATFORM_HC_FLAGS (HCD_USB2 | HCD_MEMORY)
-+
-+static inline int fsl_platform_verify(struct platform_device *pdev)
-+{
-+	return 0;
-+}
-+
-+static inline void fsl_platform_usb_setup(struct usb_hcd *hcd)
-+{
-+}
-+
-+static inline void fsl_platform_set_host_mode(struct usb_hcd *hcd)
-+{
-+	unsigned int temp;
-+	struct fsl_usb2_platform_data *pdata;
-+	struct fsl_usb_host_regs *regs;
-+
-+	pdata = hcd->self.controller->platform_data;
-+	regs = pdata->regs;
-+
-+	if (pdata->xcvr_ops && pdata->xcvr_ops->set_host)
-+		pdata->xcvr_ops->set_host();
-+
-+	/* set host mode and select "big endian" */
-+	temp = fsl_readl(&regs->usbmode);
-+	temp |= USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
-+	fsl_writel(temp, &regs->usbmode);
-+
-+	pr_debug("%s: set usbmode to 0x%x\n\n", __FUNCTION__,
-+		fsl_readl(&regs->usbmode));
-+
-+}
---- /dev/null
-+++ b/include/asm-m68k/mcf5445x_xbs.h
-@@ -0,0 +1,81 @@
-+/*
-+ * Kurt Mahan kmahan@freescale.com
-+ *
-+ * Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __MCF5445X_XBS_H__
-+#define __MCF5445X_XBS_H__
-+
-+/*
-+ * Crossbar Switch (XBS)
-+ */
-+
-+/* Register read/write macros */
-+#define MCF_XBS_PRS1		MCF_REG32(0xFC004100) /* Flexbus Priority */
-+#define MCF_XBS_CRS1		MCF_REG32(0xFC004110) /* Flexbus Control */
-+#define MCF_XBS_PRS2		MCF_REG32(0xFC004200) /* SDRam Priority */
-+#define MCF_XBS_CRS2		MCF_REG32(0xFC004210) /* SDRam Control */
-+#define MCF_XBS_PRS3		MCF_REG32(0xFC004300) /* ATA Priority */
-+#define MCF_XBS_CRS3		MCF_REG32(0xFC004310) /* ATA Control */
-+#define MCF_XBS_PRS4		MCF_REG32(0xFC004400) /* SRAM Priority */
-+#define MCF_XBS_CRS4		MCF_REG32(0xFC004410) /* SRAM Control */
-+#define MCF_XBS_PRS5		MCF_REG32(0xFC004500) /* PCI Priority */
-+#define MCF_XBS_CRS5		MCF_REG32(0xFC004510) /* PCI Control */
-+#define MCF_XBS_PRS6		MCF_REG32(0xFC004600) /* Slave6 Priority */
-+#define MCF_XBS_CRS6		MCF_REG32(0xFC004610) /* Slave6 Control */
-+#define MCF_XBS_PRS7		MCF_REG32(0xFC004700) /* Other Priority */
-+#define MCF_XBS_CRS7		MCF_REG32(0xFC004710) /* Other Control */
-+
-+/* Priorities */
-+#define MCF_XBS_PRI_1		0	/* Level 1 (highest) */
-+#define MCF_XBS_PRI_2		1	/* Level 2 */
-+#define MCF_XBS_PRI_3		2	/* Level 3 */
-+#define MCF_XBS_PRI_4		3	/* Level 4 */
-+#define MCF_XBS_PRI_5		4	/* Level 5 */
-+#define MCF_XBS_PRI_6		5	/* Level 6 */
-+#define MCF_XBS_PRI_7		6	/* Level 7 (lowest) */
-+#define MCF_XBS_PRI_MASK	7	/* Mask (Not a valid level) */
-+
-+/* Priority Register (PRSn) Defs */
-+#define	MCF_XBS_PRS_MACRO(m,p)	((p)<<((m)<<2))
-+#define	MCF_XBS_PRS_M0(p)	MCF_XBS_PRS_MACRO(0, p)	/* Coldfire Core */
-+#define	MCF_XBS_PRS_M1(p)	MCF_XBS_PRS_MACRO(1, p) /* eDMA */
-+#define	MCF_XBS_PRS_M2(p)	MCF_XBS_PRS_MACRO(2, p) /* FEC0 */
-+#define	MCF_XBS_PRS_M3(p)	MCF_XBS_PRS_MACRO(3, p) /* FEC1 */
-+#define	MCF_XBS_PRS_M4(p)	MCF_XBS_PRS_MACRO(4, p) /* Master 4 */
-+#define	MCF_XBS_PRS_M5(p)	MCF_XBS_PRS_MACRO(5, p) /* PCI */
-+#define	MCF_XBS_PRS_M6(p)	MCF_XBS_PRS_MACRO(6, p) /* USB OTG */
-+#define	MCF_XBS_PRS_M7(p)	MCF_XBS_PRS_MACRO(7, p) /* Serial Boot */
-+
-+/* Control Register (CRSn) Defs */
-+#define MCF_XBS_CRS_RO		0x80000000	/* Read Only */
-+#define	MCF_XBS_CRS_ARB		0x00000100	/* Arbitration Mode */
-+#define	MCF_XBS_CRS_PCTL	0x00000030	/* Parking Control */
-+#define	MCF_XBS_CRS_PARK	0x00000007	/* Park Location */
-+
-+/* MCF_XBS_CRS_ARB Defs */
-+#define MCF_ABS_CRS_ARB_FIXED	0x00000000	/* Fixed priority */
-+#define MCF_ABS_CRS_ARB_ROUND	0x00000100	/* Round Robin priority */
-+
-+/* MCF_XBS_CRS_PCTL Defs */
-+#define MCF_ABS_CRS_PCTL_PARK	0x00000000	/* Park on the defined PARK */
-+#define MCF_ABS_CRS_PCTL_LAST 	0x00000010	/* Park on the last master */
-+#define MCF_ABS_CRS_PCTL_NONE 	0x00000020	/* Don't park */
-+
-+/* MCF_XBS_CRS_PARK Defs */
-+#define MCF_ABS_CRS_PARK_M0	0x00000000	/* Park on Coldfire Core */
-+#define MCF_ABS_CRS_PARK_M1	0x00000001	/* Park on eDMA */
-+#define MCF_ABS_CRS_PARK_M2	0x00000002	/* Park on FEC0 */
-+#define MCF_ABS_CRS_PARK_M3	0x00000003	/* Park on FEC1 */
-+#define MCF_ABS_CRS_PARK_M4	0x00000004	/* Park on Reserved */
-+#define MCF_ABS_CRS_PARK_M5	0x00000005	/* Park on PCI */
-+#define MCF_ABS_CRS_PARK_M6	0x00000006	/* Park on USB OTG */
-+#define MCF_ABS_CRS_PARK_M7	0x00000007	/* Park on Serial Boot */
-+
-+#endif /* __MCF5445X_XBS_H__ */
---- /dev/null
-+++ b/include/asm-m68k/mcfdspi.h
-@@ -0,0 +1,48 @@
-+/*
-+ * mcfdspi.h-DSPI controller for the ColdFire processors.
-+ *
-+ * Andrey Butok
-+ * Copyright Freescale Semiconductor, Inc. 2008
-+ *
-+ *    This file is based on mcfqspi.h
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ ***************************************************************************
-+ * Changes:
-+ *   v0.001	25 March 2008		Andrey Butok
-+ *   		Initial Release - developed on uClinux with 2.6.23 kernel.
-+ *
-+ */
-+
-+#ifndef MCFDSPI_H_
-+#define MCFDSPI_H_
-+
-+struct coldfire_dspi_chip {
-+	u8 mode;
-+	u8 bits_per_word;
-+	u16 void_write_data;
-+	/* Only used in master mode */
-+	u8 dbr;		/* Double baud rate */
-+	u8 pbr;		/* Baud rate prescaler */
-+	u8 br;		/* Baud rate scaler */
-+	u8 pcssck;	/* PCS to SCK delay prescaler */
-+	u8 pasc;	/* After SCK delay prescaler */
-+	u8 pdt;		/* Delay after transfer prescaler */
-+	u8 cssck;	/* PCS to SCK delay scaler */
-+	u8 asc;		/* After SCK delay scaler */
-+	u8 dt;		/* Delay after transfer scaler */
-+};
-+#endif /*MCFDSPI_H_*/
---- /dev/null
-+++ b/include/asm-m68k/mcfqspi.h
-@@ -0,0 +1,51 @@
-+/****************************************************************************/
-+/*
-+ *	mcfqspi.h - Master QSPI controller for the ColdFire processors
-+ *
-+ *	(C) Copyright 2005, Intec Automation,
-+ *			    Mike Lavender (mike@steroidmicros)
-+ *
-+
-+     This program is free software; you can redistribute it and/or modify
-+     it under the terms of the GNU General Public License as published by
-+     the Free Software Foundation; either version 2 of the License, or
-+     (at your option) any later version.
-+
-+     This program is distributed in the hope that it will be useful,
-+     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+     GNU General Public License for more details.
-+
-+     You should have received a copy of the GNU General Public License
-+     along with this program; if not, write to the Free Software
-+     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
-+/* ------------------------------------------------------------------------- */
-+
-+#ifndef MCFQSPI_H_
-+#define MCFQSPI_H_
-+
-+#define QSPI_CS_INIT     0x01
-+#define QSPI_CS_ASSERT	 0x02
-+#define QSPI_CS_DROP	 0x04
-+
-+struct coldfire_spi_master {
-+	u16 bus_num;
-+	u16 num_chipselect;
-+	u8  irq_source;
-+	u32 irq_vector;
-+	u32 irq_mask;
-+	u8  irq_lp;
-+	u8  par_val;
-+	u32 *irq_list;
-+	void (*cs_control)(u8 cs, u8 command);
-+};
-+
-+
-+struct coldfire_spi_chip {
-+	u8 mode;
-+	u8 bits_per_word;
-+	u8 del_cs_to_clk;
-+	u8 del_after_trans;
-+	u16 void_write_data;
-+};
-+#endif /*MCFQSPI_H_*/
---- /dev/null
-+++ b/include/asm-m68k/mcfsim.h
-@@ -0,0 +1,102 @@
-+/*
-+ *	mcfsim.h -- ColdFire System Integration Module support.
-+ *
-+ *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
-+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com)
-+ */
-+
-+#ifndef	mcfsim_h
-+#define	mcfsim_h
-+
-+#if defined(CONFIG_COLDFIRE)
-+#include <asm/coldfire.h>
-+#endif
-+
-+#if defined(CONFIG_M5445X)
-+#include <asm/mcf5445x_intc.h>
-+#include <asm/mcf5445x_gpio.h>
-+#include <asm/mcf5445x_i2c.h>
-+#include <asm/mcf5445x_ccm.h>
-+#include <asm/mcf5445x_pci.h>
-+#include <asm/mcf5445x_pciarb.h>
-+#include <asm/mcf5445x_eport.h>
-+#include <asm/mcf5445x_fbcs.h>
-+#include <asm/mcf5445x_xbs.h>
-+#include <asm/mcf5445x_dtim.h>
-+#elif defined(CONFIG_M547X_8X)
-+#include <asm/m5485sim.h>
-+#include <asm/m5485gpio.h>
-+#endif
-+
-+/*
-+ *	Define the base address of the SIM within the MBAR address space.
-+ */
-+#define	MCFSIM_BASE		0x0		/* Base address of SIM */
-+
-+/*
-+ *	Bit definitions for the ICR family of registers.
-+ */
-+#define	MCFSIM_ICR_AUTOVEC	0x80		/* Auto-vectored intr */
-+#define	MCFSIM_ICR_LEVEL0	0x00		/* Level 0 intr */
-+#define	MCFSIM_ICR_LEVEL1	0x04		/* Level 1 intr */
-+#define	MCFSIM_ICR_LEVEL2	0x08		/* Level 2 intr */
-+#define	MCFSIM_ICR_LEVEL3	0x0c		/* Level 3 intr */
-+#define	MCFSIM_ICR_LEVEL4	0x10		/* Level 4 intr */
-+#define	MCFSIM_ICR_LEVEL5	0x14		/* Level 5 intr */
-+#define	MCFSIM_ICR_LEVEL6	0x18		/* Level 6 intr */
-+#define	MCFSIM_ICR_LEVEL7	0x1c		/* Level 7 intr */
-+
-+#define	MCFSIM_ICR_PRI0		0x00		/* Priority 0 intr */
-+#define	MCFSIM_ICR_PRI1		0x01		/* Priority 1 intr */
-+#define	MCFSIM_ICR_PRI2		0x02		/* Priority 2 intr */
-+#define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
-+
-+/*
-+ *	Bit definitions for the Interrupt Mask register (IMR).
-+ */
-+#define	MCFSIM_IMR_EINT1	0x0002		/* External intr # 1 */
-+#define	MCFSIM_IMR_EINT2	0x0004		/* External intr # 2 */
-+#define	MCFSIM_IMR_EINT3	0x0008		/* External intr # 3 */
-+#define	MCFSIM_IMR_EINT4	0x0010		/* External intr # 4 */
-+#define	MCFSIM_IMR_EINT5	0x0020		/* External intr # 5 */
-+#define	MCFSIM_IMR_EINT6	0x0040		/* External intr # 6 */
-+#define	MCFSIM_IMR_EINT7	0x0080		/* External intr # 7 */
-+
-+#define	MCFSIM_IMR_SWD		0x0100		/* Software Watchdog intr */
-+#define	MCFSIM_IMR_TIMER1	0x0200		/* TIMER 1 intr */
-+#define	MCFSIM_IMR_TIMER2	0x0400		/* TIMER 2 intr */
-+#define MCFSIM_IMR_MBUS		0x0800		/* MBUS intr	*/
-+#define	MCFSIM_IMR_UART1	0x1000		/* UART 1 intr */
-+#define	MCFSIM_IMR_UART2	0x2000		/* UART 2 intr */
-+
-+/*
-+ *	Mask for all of the SIM devices. Some parts have more or less
-+ *	SIM devices. This is a catchall for the sandard set.
-+ */
-+#ifndef MCFSIM_IMR_MASKALL
-+#define	MCFSIM_IMR_MASKALL	0x3ffe		/* All intr sources */
-+#endif
-+
-+
-+/*
-+ *	PIT interrupt settings, if not found in mXXXXsim.h file.
-+ */
-+#ifndef	ICR_INTRCONF
-+#define	ICR_INTRCONF		0x2b            /* PIT1 level 5, priority 3 */
-+#endif
-+#ifndef	MCFPIT_IMR
-+#define	MCFPIT_IMR		MCFINTC_IMRH
-+#endif
-+#ifndef	MCFPIT_IMR_IBIT
-+#define	MCFPIT_IMR_IBIT		(1 << (MCFINT_PIT1 - 32))
-+#endif
-+
-+
-+#ifndef __ASSEMBLY__
-+/*
-+ *	Definition for the interrupt auto-vectoring support.
-+ */
-+extern void	mcf_autovector(unsigned int vec);
-+#endif /* __ASSEMBLY__ */
-+
-+#endif	/* mcfsim_h */
---- /dev/null
-+++ b/include/asm-m68k/mcfuart.h
-@@ -0,0 +1,194 @@
-+/*
-+ *	mcfuart.h -- ColdFire internal UART support defines.
-+ *
-+ *	Matt Waddel Matt.Waddel@freescale.com
-+ *	Copyright Freescale Semiconductor, Inc. 2007
-+ *
-+ *	Derived from m68knommu version of this same file (Greg Ungerer & Lineo).
-+ *
-+ */
-+
-+#ifndef	mcfuart_h
-+#define	mcfuart_h
-+
-+/*
-+ *	Define the base address of the UARTS within the MBAR address
-+ *	space.
-+ */
-+#if defined(CONFIG_M5445X)
-+#include <asm/mcf5445x_intc.h>
-+#define MCFUART_BASE1		0xfc060000	/* Base address of UART1 */
-+#define MCFUART_BASE2		0xfc064000	/* Base address of UART2 */
-+#define MCFUART_BASE3		0xfc068000	/* Base address of UART3 */
-+#define MCFINT_VECBASE		64
-+#define MCFINT_UART0		26
-+
-+#elif defined(CONFIG_M547X_8X)
-+
-+#define MCFUART_BASE1		0x8600		/* Base address of UART1 */
-+#define MCFUART_BASE2		0x8700		/* Base address of UART2 */
-+#define MCFUART_BASE3		0x8800		/* Base address of UART3 */
-+#define MCFUART_BASE4		0x8900		/* Base address of UART4 */
-+#define MCFINT_VECBASE		64
-+#define MCFINT_UART0		35
-+#endif
-+
-+
-+/*
-+ *	Define the ColdFire UART register set addresses.
-+ */
-+#define	MCFUART_UMR		0x00		/* Mode register (r/w) */
-+#define	MCFUART_USR		0x04		/* Status register (r) */
-+#define	MCFUART_UCSR		0x04		/* Clock Select (w) */
-+#define	MCFUART_UCR		0x08		/* Command register (w) */
-+#define	MCFUART_URB		0x0c		/* Receiver Buffer (r) */
-+#define	MCFUART_UTB		0x0c		/* Transmit Buffer (w) */
-+#define	MCFUART_UIPCR		0x10		/* Input Port Change (r) */
-+#define	MCFUART_UACR		0x10		/* Auxiliary Control (w) */
-+#define	MCFUART_UISR		0x14		/* Interrup Status (r) */
-+#define	MCFUART_UIMR		0x14		/* Interrupt Mask (w) */
-+#define	MCFUART_UBG1		0x18		/* Baud Rate MSB (r/w) */
-+#define	MCFUART_UBG2		0x1c		/* Baud Rate LSB (r/w) */
-+#ifdef	CONFIG_M5272
-+#define	MCFUART_UTF		0x28		/* Transmitter FIFO (r/w) */
-+#define	MCFUART_URF		0x2c		/* Receiver FIFO (r/w) */
-+#define	MCFUART_UFPD		0x30		/* Frac Prec. Divider (r/w) */
-+#else
-+#define	MCFUART_UIVR		0x30		/* Interrupt Vector (r/w) */
-+#endif
-+#define	MCFUART_UIPR		0x34		/* Input Port (r) */
-+#define	MCFUART_UOP1		0x38		/* Output Port Bit Set (w) */
-+#define	MCFUART_UOP0		0x3c		/* Output Port Bit Reset (w) */
-+
-+
-+/*
-+ *	Define bit flags in Mode Register 1 (MR1).
-+ */
-+#define	MCFUART_MR1_RXRTS	0x80		/* Auto RTS flow control */
-+#define	MCFUART_MR1_RXIRQFULL	0x40		/* RX IRQ type FULL */
-+#define	MCFUART_MR1_RXIRQRDY	0x00		/* RX IRQ type RDY */
-+#define	MCFUART_MR1_RXERRBLOCK	0x20		/* RX block error mode */
-+#define	MCFUART_MR1_RXERRCHAR	0x00		/* RX char error mode */
-+
-+#define	MCFUART_MR1_PARITYNONE	0x10		/* No parity */
-+#define	MCFUART_MR1_PARITYEVEN	0x00		/* Even parity */
-+#define	MCFUART_MR1_PARITYODD	0x04		/* Odd parity */
-+#define	MCFUART_MR1_PARITYSPACE	0x08		/* Space parity */
-+#define	MCFUART_MR1_PARITYMARK	0x0c		/* Mark parity */
-+
-+#define	MCFUART_MR1_CS5		0x00		/* 5 bits per char */
-+#define	MCFUART_MR1_CS6		0x01		/* 6 bits per char */
-+#define	MCFUART_MR1_CS7		0x02		/* 7 bits per char */
-+#define	MCFUART_MR1_CS8		0x03		/* 8 bits per char */
-+
-+/*
-+ *	Define bit flags in Mode Register 2 (MR2).
-+ */
-+#define	MCFUART_MR2_LOOPBACK	0x80		/* Loopback mode */
-+#define	MCFUART_MR2_REMOTELOOP	0xc0		/* Remote loopback mode */
-+#define	MCFUART_MR2_AUTOECHO	0x40		/* Automatic echo */
-+#define	MCFUART_MR2_TXRTS	0x20		/* Assert RTS on TX */
-+#define	MCFUART_MR2_TXCTS	0x10		/* Auto CTS flow control */
-+
-+#define	MCFUART_MR2_STOP1	0x07		/* 1 stop bit */
-+#define	MCFUART_MR2_STOP15	0x08		/* 1.5 stop bits */
-+#define	MCFUART_MR2_STOP2	0x0f		/* 2 stop bits */
-+
-+/*
-+ *	Define bit flags in Status Register (USR).
-+ */
-+#define	MCFUART_USR_RXBREAK	0x80		/* Received BREAK */
-+#define	MCFUART_USR_RXFRAMING	0x40		/* Received framing error */
-+#define	MCFUART_USR_RXPARITY	0x20		/* Received parity error */
-+#define	MCFUART_USR_RXOVERRUN	0x10		/* Received overrun error */
-+#define	MCFUART_USR_TXEMPTY	0x08		/* Transmitter empty */
-+#define	MCFUART_USR_TXREADY	0x04		/* Transmitter ready */
-+#define	MCFUART_USR_RXFULL	0x02		/* Receiver full */
-+#define	MCFUART_USR_RXREADY	0x01		/* Receiver ready */
-+
-+#if defined(CONFIG_M547X_8X)
-+#define	MCFUART_USR_TXREADY_BN	0x0a
-+#define	MCFUART_USR_TXEMPTY_BN	0x0b
-+#endif
-+
-+#define	MCFUART_USR_RXERR	(MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
-+				MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
-+
-+/*
-+ *	Define bit flags in Clock Select Register (UCSR).
-+ */
-+#define	MCFUART_UCSR_RXCLKTIMER	0xd0		/* RX clock is timer */
-+#define	MCFUART_UCSR_RXCLKEXT16	0xe0		/* RX clock is external x16 */
-+#define	MCFUART_UCSR_RXCLKEXT1	0xf0		/* RX clock is external x1 */
-+
-+#define	MCFUART_UCSR_TXCLKTIMER	0x0d		/* TX clock is timer */
-+#define	MCFUART_UCSR_TXCLKEXT16	0x0e		/* TX clock is external x16 */
-+#define	MCFUART_UCSR_TXCLKEXT1	0x0f		/* TX clock is external x1 */
-+
-+/*
-+ *	Define bit flags in Command Register (UCR).
-+ */
-+#define	MCFUART_UCR_CMDNULL		0x00	/* No command */
-+#define	MCFUART_UCR_CMDRESETMRPTR	0x10	/* Reset MR pointer */
-+#define	MCFUART_UCR_CMDRESETRX		0x20	/* Reset receiver */
-+#define	MCFUART_UCR_CMDRESETTX		0x30	/* Reset transmitter */
-+#define	MCFUART_UCR_CMDRESETERR		0x40	/* Reset error status */
-+#define	MCFUART_UCR_CMDRESETBREAK	0x50	/* Reset BREAK change */
-+#define	MCFUART_UCR_CMDBREAKSTART	0x60	/* Start BREAK */
-+#define	MCFUART_UCR_CMDBREAKSTOP	0x70	/* Stop BREAK */
-+
-+#define	MCFUART_UCR_TXNULL	0x00		/* No TX command */
-+#define	MCFUART_UCR_TXENABLE	0x04		/* Enable TX */
-+#define	MCFUART_UCR_TXDISABLE	0x08		/* Disable TX */
-+#define	MCFUART_UCR_RXNULL	0x00		/* No RX command */
-+#define	MCFUART_UCR_RXENABLE	0x01		/* Enable RX */
-+#define	MCFUART_UCR_RXDISABLE	0x02		/* Disable RX */
-+
-+/*
-+ *	Define bit flags in Input Port Change Register (UIPCR).
-+ */
-+#define	MCFUART_UIPCR_CTSCOS	0x10		/* CTS change of state */
-+#define	MCFUART_UIPCR_CTS	0x01		/* CTS value */
-+
-+/*
-+ *	Define bit flags in Input Port Register (UIP).
-+ */
-+#define	MCFUART_UIPR_CTS	0x01		/* CTS value */
-+
-+/*
-+ *	Define bit flags in Output Port Registers (UOP).
-+ *	Clear bit by writing to UOP0, set by writing to UOP1.
-+ */
-+#define	MCFUART_UOP_RTS		0x01		/* RTS set or clear */
-+
-+/*
-+ *	Define bit flags in the Auxiliary Control Register (UACR).
-+ */
-+#define	MCFUART_UACR_IEC	0x01		/* Input enable control */
-+
-+/*
-+ *	Define bit flags in Interrupt Status Register (UISR).
-+ *	These same bits are used for the Interrupt Mask Register (UIMR).
-+ */
-+#define	MCFUART_UIR_COS		0x80		/* Change of state (CTS) */
-+#define	MCFUART_UIR_DELTABREAK	0x04		/* Break start or stop */
-+#define	MCFUART_UIR_RXREADY	0x02		/* Receiver ready */
-+#define	MCFUART_UIR_TXREADY	0x01		/* Transmitter ready */
-+
-+#ifdef	CONFIG_M5272
-+/*
-+ *	Define bit flags in the Transmitter FIFO Register (UTF).
-+ */
-+#define	MCFUART_UTF_TXB		0x1f		/* Transmitter data level */
-+#define	MCFUART_UTF_FULL	0x20		/* Transmitter fifo full */
-+#define	MCFUART_UTF_TXS		0xc0		/* Transmitter status */
-+
-+/*
-+ *	Define bit flags in the Receiver FIFO Register (URF).
-+ */
-+#define	MCFUART_URF_RXB		0x1f		/* Receiver data level */
-+#define	MCFUART_URF_FULL	0x20		/* Receiver fifo full */
-+#define	MCFUART_URF_RXS		0xc0		/* Receiver status */
-+#endif
-+
-+#endif	/* mcfuart_h */
---- a/include/asm-m68k/mmu_context.h
-+++ b/include/asm-m68k/mmu_context.h
-@@ -7,7 +7,7 @@ static inline void enter_lazy_tlb(struct
- {
- }
- 
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
- 
- #include <asm/setup.h>
- #include <asm/page.h>
-@@ -102,7 +102,7 @@ static inline void activate_mm(struct mm
- 		switch_mm_0460(next_mm);
- }
- 
--#else  /* CONFIG_SUN3 */
-+#elif defined(CONFIG_SUN3)
- #include <asm/sun3mmu.h>
- #include <linux/sched.h>
- 
-@@ -150,5 +150,155 @@ static inline void activate_mm(struct mm
- 	activate_context(next_mm);
- }
- 
--#endif
-+#else /* CONFIG_COLDFIRE */
-+
-+#include <asm/coldfire.h>
-+#include <asm/atomic.h>
-+#include <asm/bitops.h>
-+#include <asm/mmu.h>
-+
-+#define NO_CONTEXT		256
-+#define LAST_CONTEXT		255
-+#define FIRST_CONTEXT		1
-+
-+extern void set_context(mm_context_t context, pgd_t *pgd);
-+extern unsigned long context_map[];
-+extern mm_context_t next_mmu_context;
-+
-+extern atomic_t nr_free_contexts;
-+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
-+extern void steal_context(void);
-+
-+static inline void get_mmu_context(struct mm_struct *mm)
-+{
-+	mm_context_t ctx;
-+
-+	if (mm->context != NO_CONTEXT)
-+		return;
-+	while (atomic_dec_and_test_lt(&nr_free_contexts)) {
-+		atomic_inc(&nr_free_contexts);
-+		steal_context();
-+	}
-+	ctx = next_mmu_context;
-+	while (test_and_set_bit(ctx, context_map)) {
-+		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
-+		if (ctx > LAST_CONTEXT)
-+			ctx = 0;
-+	}
-+	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
-+	mm->context = ctx;
-+	context_mm[ctx] = mm;
-+}
-+
-+/*
-+ * Set up the context for a new address space.
-+ */
-+#define init_new_context(tsk, mm)	(((mm)->context = NO_CONTEXT), 0)
-+
-+/*
-+ * We're finished using the context for an address space.
-+ */
-+static inline void destroy_context(struct mm_struct *mm)
-+{
-+	if (mm->context != NO_CONTEXT) {
-+		clear_bit(mm->context, context_map);
-+		mm->context = NO_CONTEXT;
-+		atomic_inc(&nr_free_contexts);
-+	}
-+}
-+
-+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-+	struct task_struct *tsk)
-+{
-+	get_mmu_context(tsk->mm);
-+	set_context(tsk->mm->context, next->pgd);
-+}
-+
-+/*
-+ * After we have set current->mm to a new value, this activates
-+ * the context for the new mm so we see the new mappings.
-+ */
-+static inline void activate_mm(struct mm_struct *active_mm,
-+	struct mm_struct *mm)
-+{
-+	get_mmu_context(mm);
-+	set_context(mm->context, mm->pgd);
-+}
-+
-+#define deactivate_mm(tsk, mm) do { } while (0)
-+
-+extern void mmu_context_init(void);
-+#if defined(CONFIG_M547X_8X)
-+#define prepare_arch_switch(next) load_ksp_mmu(next)
-+
-+static inline void load_ksp_mmu(struct task_struct *task)
-+{
-+	int flags;
-+	struct mm_struct *mm;
-+	int asid;
-+	pgd_t *pgd;
-+	pmd_t *pmd;
-+	pte_t *pte;
-+	unsigned long mmuar;
-+
-+	local_irq_save(flags);
-+	mmuar = task->thread.ksp;
-+
-+	/* Search for a valid TLB entry, if one is found, don't remap */
-+	*MMUAR = mmuar;
-+	*MMUOR = MMUOR_STLB | MMUOR_ADR;
-+	if ((*MMUSR) & MMUSR_HIT)
-+		goto end;
-+
-+	if (mmuar >= PAGE_OFFSET) {
-+		mm = &init_mm;
-+	} else {
-+		printk ("load_ksp_mmu: non-kernel mm found: 0x%08x\n", (unsigned int) task->mm);
-+		mm = task->mm;
-+	}
-+
-+        if (!mm)
-+	    goto bug;
-+
-+        pgd = pgd_offset(mm, mmuar);
-+        if (pgd_none(*pgd))
-+	    goto bug;
-+	    
-+    	pmd = pmd_offset(pgd, mmuar);
-+    	if (pmd_none(*pmd))
-+	    goto bug;
-+    	
-+	pte = (mmuar >= PAGE_OFFSET) ? pte_offset_kernel(pmd, mmuar)
-+	                             : pte_offset_map(pmd, mmuar);
-+    	if (pte_none(*pte) || !pte_present(*pte))
-+	    goto bug;
-+
-+        set_pte(pte, pte_mkyoung(*pte));
-+        asid = mm->context & 0xff;
-+        if (!pte_dirty(*pte) && mmuar<=PAGE_OFFSET)
-+    	    set_pte(pte, pte_wrprotect(*pte));
-+
-+        *MMUTR = (mmuar & PAGE_MASK) | (asid << CF_ASID_MMU_SHIFT)
-+               | (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK ) >> CF_PAGE_MMUTR_SHIFT)
-+               | MMUTR_V;
-+
-+        *MMUDR = (pte_val(*pte) & PAGE_MASK) 
-+	       | ((pte->pte) & CF_PAGE_MMUDR_MASK)
-+               | MMUDR_SZ8K | MMUDR_X;
-+	    
-+	*MMUOR = MMUOR_ACC | MMUOR_UAA;
-+	asm ("nop");
-+
-+	goto end;
-+
-+bug:
-+	printk ("ksp load failed: mm=0x%08x ksp=0x%08x\n", (unsigned int) mm, (unsigned int) mmuar);
-+
-+end:
-+	local_irq_restore(flags);
-+}
-+
-+#endif /* CONFIG_M547X_8X */
-+
-+#endif /* CONFIG_COLDFIRE */
- #endif
---- a/include/asm-m68k/page.h
-+++ b/include/asm-m68k/page.h
-@@ -4,7 +4,7 @@
- #include <linux/const.h>
- 
- /* PAGE_SHIFT determines the page size */
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
- #define PAGE_SHIFT	(12)
- #else
- #define PAGE_SHIFT	(13)
-@@ -116,10 +116,31 @@ typedef struct page *pgtable_t;
- 
- extern unsigned long m68k_memoffset;
- 
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3)
- 
- #define WANT_PAGE_VIRTUAL
- 
-+#if defined(CONFIG_COLDFIRE)
-+static inline unsigned long ___pa(void *vaddr)
-+{
-+#if CONFIG_SDRAM_BASE != PAGE_OFFSET
-+	return (((unsigned long)vaddr & 0x0fffffff) + CONFIG_SDRAM_BASE);
-+#else
-+	return (unsigned long)vaddr;
-+#endif
-+}
-+#define __pa(vaddr)	___pa((void *)(vaddr))
-+
-+static inline void *__va(unsigned long paddr)
-+{
-+#if CONFIG_SDRAM_BASE != PAGE_OFFSET
-+	return (void *)((paddr & 0x0fffffff) + PAGE_OFFSET);
-+#else
-+	return (void *)paddr;
-+#endif
-+}
-+
-+#else
- static inline unsigned long ___pa(void *vaddr)
- {
- 	unsigned long paddr;
-@@ -141,6 +162,7 @@ static inline void *__va(unsigned long p
- 		: "0" (paddr), "i" (m68k_fixup_memoffset));
- 	return vaddr;
- }
-+#endif
- 
- #else	/* !CONFIG_SUN3 */
- /* This #define is a horrible hack to suppress lots of warnings. --m */
-@@ -172,6 +194,8 @@ static inline void *__va(unsigned long x
-  * memory node, but we have no highmem, so that works for now.
-  * TODO: implement (fast) pfn<->pgdat_idx conversion functions, this makes lots
-  * of the shifts unnecessary.
-+ *
-+ * PFNs are used to map physical pages.  So PFN[0] maps to the base phys addr.
-  */
- #define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
- #define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
-@@ -228,4 +252,9 @@ static inline __attribute_const__ int __
- 
- #include <asm-generic/page.h>
- 
-+#ifdef CONFIG_VSYSCALL
-+/* vDSO support */
-+#define __HAVE_ARCH_GATE_AREA
-+#endif
-+
- #endif /* _M68K_PAGE_H */
---- a/include/asm-m68k/page_offset.h
-+++ b/include/asm-m68k/page_offset.h
-@@ -1,8 +1,15 @@
-+/*
-+ * Page and physical memory maps.
-+ */
-+#if defined(CONFIG_SUN3)
-+#define PAGE_OFFSET_RAW		0x0E000000
-+
-+#elif defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X)
-+#define	PHYS_OFFSET		CONFIG_SDRAM_BASE
-+#define PAGE_OFFSET_RAW		(PHYS_OFFSET)
-+/* #define PAGE_OFFSET_RAW		0xC0000000 */
- 
--/* This handles the memory map.. */
--#ifndef CONFIG_SUN3
--#define PAGE_OFFSET_RAW		0x00000000
- #else
--#define PAGE_OFFSET_RAW		0x0E000000
-+/* default */
-+#define PAGE_OFFSET_RAW		0x00000000
- #endif
--
---- a/include/asm-m68k/pci.h
-+++ b/include/asm-m68k/pci.h
-@@ -1,57 +1,10 @@
--#ifndef _ASM_M68K_PCI_H
--#define _ASM_M68K_PCI_H
-+#ifndef M68K_PCI_H
-+#define M68K_PCI_H
- 
--/*
-- * asm-m68k/pci_m68k.h - m68k specific PCI declarations.
-- *
-- * Written by Wout Klaren.
-- */
-+#ifdef CONFIG_M5445X
-+#include "5445x_pci.h"
-+#else
-+#include "548x_pci.h"
-+#endif
- 
--#include <asm/scatterlist.h>
--
--struct pci_ops;
--
--/*
-- * Structure with hardware dependent information and functions of the
-- * PCI bus.
-- */
--
--struct pci_bus_info
--{
--	/*
--	 * Resources of the PCI bus.
--	 */
--
--	struct resource mem_space;
--	struct resource io_space;
--
--	/*
--	 * System dependent functions.
--	 */
--
--	struct pci_ops *m68k_pci_ops;
--
--	void (*fixup)(int pci_modify);
--	void (*conf_device)(struct pci_dev *dev);
--};
--
--#define pcibios_assign_all_busses()	0
--#define pcibios_scan_all_fns(a, b)	0
--
--static inline void pcibios_set_master(struct pci_dev *dev)
--{
--	/* No special bus mastering setup handling */
--}
--
--static inline void pcibios_penalize_isa_irq(int irq, int active)
--{
--	/* We don't do dynamic PCI IRQ allocation */
--}
--
--/* The PCI address space does equal the physical memory
-- * address space.  The networking and block device layers use
-- * this boolean for bounce buffer decisions.
-- */
--#define PCI_DMA_BUS_IS_PHYS	(1)
--
--#endif /* _ASM_M68K_PCI_H */
-+#endif /* M68K_PCI_H */
---- a/include/asm-m68k/pgalloc.h
-+++ b/include/asm-m68k/pgalloc.h
-@@ -8,8 +8,10 @@
- #include <asm/virtconvert.h>
- 
- 
--#ifdef CONFIG_SUN3
-+#if defined(CONFIG_SUN3)
- #include <asm/sun3_pgalloc.h>
-+#elif defined(CONFIG_COLDFIRE)
-+#include <asm/cf_pgalloc.h>
- #else
- #include <asm/motorola_pgalloc.h>
- #endif
---- a/include/asm-m68k/pgtable.h
-+++ b/include/asm-m68k/pgtable.h
-@@ -40,6 +40,8 @@
- /* PGDIR_SHIFT determines what a third-level page table entry can map */
- #ifdef CONFIG_SUN3
- #define PGDIR_SHIFT     17
-+#elif defined(CONFIG_COLDFIRE)
-+#define PGDIR_SHIFT	22
- #else
- #define PGDIR_SHIFT	25
- #endif
-@@ -54,6 +56,10 @@
- #define PTRS_PER_PTE   16
- #define PTRS_PER_PMD   1
- #define PTRS_PER_PGD   2048
-+#elif defined(CONFIG_COLDFIRE)
-+#define PTRS_PER_PTE    512
-+#define PTRS_PER_PMD    1
-+#define PTRS_PER_PGD    1024
- #else
- #define PTRS_PER_PTE	1024
- #define PTRS_PER_PMD	8
-@@ -66,6 +72,11 @@
- #ifdef CONFIG_SUN3
- #define KMAP_START     0x0DC00000
- #define KMAP_END       0x0E000000
-+#elif defined(CONFIG_COLDFIRE)
-+#define	VMALLOC_START	0xc0000000
-+#define VMALLOC_END	0xcfffffff
-+#define KMAP_START	(VMALLOC_END + 1)
-+#define KMAP_END	0xe0000000
- #else
- #define	KMAP_START	0xd0000000
- #define	KMAP_END	0xf0000000
-@@ -79,9 +90,11 @@
-  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
-  * area for the same reason. ;)
-  */
-+#if !defined(CONFIG_COLDFIRE)
- #define VMALLOC_OFFSET	(8*1024*1024)
- #define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
- #define VMALLOC_END KMAP_START
-+#endif
- #else
- extern unsigned long vmalloc_end;
- #define VMALLOC_START 0x0f800000
-@@ -130,6 +143,8 @@ static inline void update_mmu_cache(stru
- 
- #ifdef CONFIG_SUN3
- #include <asm/sun3_pgtable.h>
-+#elif defined(CONFIG_COLDFIRE)
-+#include <asm/cf_pgtable.h>
- #else
- #include <asm/motorola_pgtable.h>
- #endif
-@@ -140,6 +155,9 @@ static inline void update_mmu_cache(stru
- /*
-  * Macro to mark a page protection value as "uncacheable".
-  */
-+#ifdef CONFIG_COLDFIRE
-+# define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) | CF_PAGE_NOCACHE))
-+#else /* CONFIG_COLDFIRE */
- #ifdef SUN3_PAGE_NOCACHE
- # define __SUN3_PAGE_NOCACHE	SUN3_PAGE_NOCACHE
- #else
-@@ -154,6 +172,7 @@ static inline void update_mmu_cache(stru
- 	    ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S))	\
- 	    : (prot)))
- 
-+#endif /* CONFIG_COLDFIRE */
- #endif /* !__ASSEMBLY__ */
- 
- /*
---- a/include/asm-m68k/processor.h
-+++ b/include/asm-m68k/processor.h
-@@ -22,24 +22,38 @@ static inline unsigned long rdusp(void)
- {
- 	unsigned long usp;
- 
-+#ifndef CONFIG_COLDFIRE
- 	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
-+#else
-+	__asm__ __volatile__("movel %/usp,%0" : "=a" (usp));
-+#endif
- 	return usp;
- }
- 
- static inline void wrusp(unsigned long usp)
- {
-+#ifndef CONFIG_COLDFIRE
- 	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
-+#else
-+	__asm__ __volatile__("movel %0,%/usp" : : "a" (usp));
-+#endif
- }
- 
- /*
-  * User space process size: 3.75GB. This is hardcoded into a few places,
-  * so don't change it unless you know what you are doing.
-  */
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
- #define TASK_SIZE	(0xF0000000UL)
-+#elif defined(CONFIG_COLDFIRE)
-+#define TASK_SIZE       (0xC0000000UL)
-+#else /* CONFIG_SUN3 */
-+#ifdef __ASSEMBLY__
-+#define TASK_SIZE	(0x0E000000)
- #else
- #define TASK_SIZE	(0x0E000000UL)
- #endif
-+#endif
- 
- #ifdef __KERNEL__
- #define STACK_TOP	TASK_SIZE
-@@ -49,9 +63,11 @@ static inline void wrusp(unsigned long u
- /* This decides where the kernel will search for a free chunk of vm
-  * space during mmap's.
-  */
--#ifndef CONFIG_SUN3
--#define TASK_UNMAPPED_BASE	0xC0000000UL
--#else
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
-+#define TASK_UNMAPPED_BASE     0xC0000000UL
-+#elif defined(CONFIG_COLDFIRE)
-+#define TASK_UNMAPPED_BASE     0x80000000UL
-+#else /* CONFIG_SUN3 */
- #define TASK_UNMAPPED_BASE	0x0A000000UL
- #endif
- #define TASK_UNMAPPED_ALIGN(addr, off)	PAGE_ALIGN(addr)
-@@ -60,7 +76,11 @@ struct thread_struct {
- 	unsigned long  ksp;		/* kernel stack pointer */
- 	unsigned long  usp;		/* user stack pointer */
- 	unsigned short sr;		/* saved status register */
-+#ifndef CONFIG_COLDFIRE
- 	unsigned short fs;		/* saved fs (sfc, dfc) */
-+#else
-+	mm_segment_t   fs;
-+#endif
- 	unsigned long  crp[2];		/* cpu root pointer */
- 	unsigned long  esp0;		/* points to SR of stack frame */
- 	unsigned long  faddr;		/* info about last fault */
-@@ -81,6 +101,7 @@ struct thread_struct {
- /*
-  * Do necessary setup to start up a newly executed thread.
-  */
-+#ifndef CONFIG_COLDFIRE
- static inline void start_thread(struct pt_regs * regs, unsigned long pc,
- 				unsigned long usp)
- {
-@@ -91,6 +112,23 @@ static inline void start_thread(struct p
- 	regs->sr &= ~0x2000;
- 	wrusp(usp);
- }
-+#else
-+/*
-+ * Do necessary setup to start up a newly executed thread.
-+ *
-+ * pass the data segment into user programs if it exists,
-+ * it can't hurt anything as far as I can tell
-+ */
-+#define start_thread(_regs, _pc, _usp)			\
-+do {							\
-+	set_fs(USER_DS); /* reads from user space */	\
-+	(_regs)->pc = (_pc);				\
-+	if (current->mm)				\
-+		(_regs)->d5 = current->mm->start_data;	\
-+	(_regs)->sr &= ~0x2000;				\
-+	wrusp(_usp);					\
-+} while (0)
-+#endif
- 
- /* Forward declaration, a strange C thing */
- struct task_struct;
---- a/include/asm-m68k/ptrace.h
-+++ b/include/asm-m68k/ptrace.h
-@@ -38,10 +38,21 @@ struct pt_regs {
-   long     d0;
-   long     orig_d0;
-   long     stkadj;
-+#ifndef CONFIG_COLDFIRE
-   unsigned short sr;
-   unsigned long  pc;
-   unsigned format :  4; /* frame format specifier */
-   unsigned vector : 12; /* vector offset */
-+#else
-+  unsigned long mmuar;
-+  unsigned long mmusr;
-+  unsigned format : 4;  /* frame format specifier */
-+  unsigned fs2 : 2;
-+  unsigned vector: 8;
-+  unsigned fs1 : 2;
-+  unsigned short sr;
-+  unsigned long pc;
-+#endif
- };
- 
- /*
---- a/include/asm-m68k/raw_io.h
-+++ b/include/asm-m68k/raw_io.h
-@@ -46,6 +46,29 @@ extern void __iounmap(void *addr, unsign
- #define out_le16(addr,w) (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w))
- #define out_le32(addr,l) (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l))
- 
-+#if (defined CONFIG_COLDFIRE) && (defined CONFIG_PCI)
-+unsigned char  pci_inb(long addr);
-+unsigned short pci_inw(long addr);
-+unsigned long  pci_inl(long addr);
-+void pci_outb(unsigned char  val, long addr);
-+void pci_outw(unsigned short val, long addr);
-+void pci_outl(unsigned long  val, long addr);
-+unsigned short pci_raw_inw(long addr);
-+unsigned long  pci_raw_inl(long addr);
-+void pci_raw_outw(unsigned short val, long addr);
-+void pci_raw_outl(unsigned long  val, long addr);
-+#define raw_inb(port) pci_inb((long)((volatile unsigned char *)(port)))
-+#define raw_inw(port) pci_raw_inw((long)((volatile unsigned short *)(port)))
-+#define raw_inl(port) pci_raw_inl((long)((volatile unsigned long *)(port)))
-+
-+#define raw_outb(val,port) pci_outb((val),(long)((volatile unsigned char *)(port)))
-+#define raw_outw(val,port) pci_raw_outw((val),(long)((volatile unsigned short *)(port)))
-+#define raw_outl(val,port) pci_raw_outl((val),(long)((volatile unsigned long *)(port)))
-+
-+#define swap_inw(port) pci_inw((long)((volatile unsigned short *)(port)))
-+#define swap_outw(val,port) pci_outw((val),(long)((volatile unsigned short *)(port)))
-+
-+#else
- #define raw_inb in_8
- #define raw_inw in_be16
- #define raw_inl in_be32
-@@ -60,6 +83,9 @@ extern void __iounmap(void *addr, unsign
- #define __raw_writew(val,addr) out_be16((addr),(val))
- #define __raw_writel(val,addr) out_be32((addr),(val))
- 
-+#define swap_inw(port) in_le16((port))
-+#define swap_outw(val,port) out_le16((port),(val))
-+#endif
- static inline void raw_insb(volatile u8 __iomem *port, u8 *buf, unsigned int len)
- {
- 	unsigned int i;
-@@ -77,6 +103,7 @@ static inline void raw_outsb(volatile u8
- 		out_8(port, *buf++);
- }
- 
-+#ifndef CONFIG_COLDFIRE
- static inline void raw_insw(volatile u16 __iomem *port, u16 *buf, unsigned int nr)
- {
- 	unsigned int tmp;
-@@ -342,6 +369,63 @@ static inline void raw_outsw_swapw(volat
- 		: "d0", "a0", "a1", "d6");
- }
- 
-+
-+#else /*CONFIG_COLDFIRE */
-+
-+static inline void raw_insw(volatile u16 *port, u16 *buf, unsigned int nr)
-+{
-+	unsigned int i;
-+
-+	for (i = 0; i < nr; i++)
-+		*buf++ = raw_inw(port);
-+}
-+
-+static inline void raw_outsw(volatile u16 *port, const u16 *buf,
-+	unsigned int nr)
-+{
-+	unsigned int i;
-+
-+	for (i = 0; i < nr; i++, buf++)
-+		raw_outw(*buf, port);
-+}
-+
-+static inline void raw_insl(volatile u32 *port, u32 *buf, unsigned int nr)
-+{
-+	unsigned int i;
-+
-+	for (i = 0; i < nr; i++)
-+		*buf++ = raw_inl(port);
-+}
-+
-+static inline void raw_outsl(volatile u32 *port, const u32 *buf,
-+	unsigned int nr)
-+{
-+	unsigned int i;
-+
-+	for (i = 0; i < nr; i++, buf++)
-+		raw_outl(*buf, port);
-+}
-+
-+static inline void raw_insw_swapw(volatile u16 *port, u16 *buf,
-+				  unsigned int nr)
-+{
-+	unsigned int i;
-+
-+	for (i = 0; i < nr; i++)
-+		*buf++ = in_le16(port);
-+
-+}
-+
-+static inline void raw_outsw_swapw(volatile u16 __iomem *port, const u16 *buf,
-+				   unsigned int nr)
-+{
-+	unsigned int i;
-+
-+	for (i = 0; i < nr; i++, buf++)
-+		out_le16(port, *buf);
-+}
-+#endif /*CONFIG_COLDFIRE */
-+
- #endif /* __KERNEL__ */
- 
- #endif /* _RAW_IO_H */
---- a/include/asm-m68k/segment.h
-+++ b/include/asm-m68k/segment.h
-@@ -29,6 +29,7 @@ typedef struct {
-  * Get/set the SFC/DFC registers for MOVES instructions
-  */
- 
-+#ifndef CONFIG_COLDFIRE
- static inline mm_segment_t get_fs(void)
- {
- 	mm_segment_t _v;
-@@ -50,6 +51,15 @@ static inline void set_fs(mm_segment_t v
- 			      : /* no outputs */ : "r" (val.seg) : "memory");
- }
- 
-+#else /* CONFIG_COLDFIRE */
-+
-+#include <asm/current.h>
-+#define get_fs()        (current->thread.fs)
-+#define set_fs(val)     (current->thread.fs = (val))
-+#define get_ds()	(KERNEL_DS)
-+
-+#endif /* CONFIG_COLDFIRE */
-+
- #define segment_eq(a,b)	((a).seg == (b).seg)
- 
- #endif /* __ASSEMBLY__ */
---- a/include/asm-m68k/setup.h
-+++ b/include/asm-m68k/setup.h
-@@ -40,6 +40,7 @@
- #define MACH_HP300    9
- #define MACH_Q40     10
- #define MACH_SUN3X   11
-+#define MACH_CFMMU   12
- 
- #define COMMAND_LINE_SIZE 256
- 
-@@ -189,6 +190,14 @@ extern unsigned long m68k_machtype;
- #  define MACH_TYPE (MACH_SUN3X)
- #endif
- 
-+#if !defined(CONFIG_COLDFIRE)
-+#  define MACH_IS_COLDFIRE (0)
-+#else
-+#  define CONFIG_COLDFIRE_ONLY
-+#  define MACH_IS_COLDFIRE (1)
-+#  define MACH_TYPE (MACH_CFMMU)
-+#endif
-+
- #ifndef MACH_TYPE
- #  define MACH_TYPE (m68k_machtype)
- #endif
-@@ -211,23 +220,31 @@ extern unsigned long m68k_machtype;
- #define CPUB_68030     1
- #define CPUB_68040     2
- #define CPUB_68060     3
-+#define CPUB_CFV4E     4
- 
- #define CPU_68020      (1<<CPUB_68020)
- #define CPU_68030      (1<<CPUB_68030)
- #define CPU_68040      (1<<CPUB_68040)
- #define CPU_68060      (1<<CPUB_68060)
-+#define CPU_CFV4E      (1<<CPUB_CFV4E)
- 
- #define FPUB_68881     0
- #define FPUB_68882     1
- #define FPUB_68040     2                       /* Internal FPU */
- #define FPUB_68060     3                       /* Internal FPU */
- #define FPUB_SUNFPA    4                       /* Sun-3 FPA */
-+#define FPUB_CFV4E     5
- 
- #define FPU_68881      (1<<FPUB_68881)
- #define FPU_68882      (1<<FPUB_68882)
- #define FPU_68040      (1<<FPUB_68040)
- #define FPU_68060      (1<<FPUB_68060)
- #define FPU_SUNFPA     (1<<FPUB_SUNFPA)
-+#ifndef CONFIG_M5445X
-+#define FPU_CFV4E      (1<<FPUB_CFV4E)
-+#else
-+#define FPU_CFV4E      0
-+#endif
- 
- #define MMUB_68851     0
- #define MMUB_68030     1                       /* Internal MMU */
-@@ -235,6 +252,7 @@ extern unsigned long m68k_machtype;
- #define MMUB_68060     3                       /* Internal MMU */
- #define MMUB_APOLLO    4                       /* Custom Apollo */
- #define MMUB_SUN3      5                       /* Custom Sun-3 */
-+#define MMUB_CFV4E     6
- 
- #define MMU_68851      (1<<MMUB_68851)
- #define MMU_68030      (1<<MMUB_68030)
-@@ -242,6 +260,7 @@ extern unsigned long m68k_machtype;
- #define MMU_68060      (1<<MMUB_68060)
- #define MMU_SUN3       (1<<MMUB_SUN3)
- #define MMU_APOLLO     (1<<MMUB_APOLLO)
-+#define MMU_CFV4E      (1<<MMUB_CFV4E)
- 
- #ifdef __KERNEL__
- 
-@@ -341,6 +360,14 @@ extern int m68k_is040or060;
- #  endif
- #endif
- 
-+#if !defined(CONFIG_CFV4E)
-+#  define CPU_IS_COLDFIRE (0)
-+#else
-+#  define CPU_IS_COLDFIRE (1)
-+#  define CPU_IS_CFV4E    (1)
-+#  define MMU_IS_CFV4E    (1)
-+#endif
-+
- #define CPU_TYPE (m68k_cputype)
- 
- #ifdef CONFIG_M68KFPU_EMU
---- a/include/asm-m68k/signal.h
-+++ b/include/asm-m68k/signal.h
-@@ -150,6 +150,7 @@ typedef struct sigaltstack {
- #ifdef __KERNEL__
- #include <asm/sigcontext.h>
- 
-+#ifndef CONFIG_COLDFIRE
- #define __HAVE_ARCH_SIG_BITOPS
- 
- static inline void sigaddset(sigset_t *set, int _sig)
-@@ -200,6 +201,10 @@ static inline int sigfindinword(unsigned
- 
- struct pt_regs;
- extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
-+#else
-+
-+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-+#endif /* CONFIG_COLDFIRE */
- 
- #endif /* __KERNEL__ */
- 
---- a/include/asm-m68k/string.h
-+++ b/include/asm-m68k/string.h
-@@ -93,6 +93,7 @@ static inline char *strchr(const char *s
- 	return (char *)s - 1;
- }
- 
-+#ifndef CONFIG_COLDFIRE
- #define __HAVE_ARCH_STRCMP
- static inline int strcmp(const char *cs, const char *ct)
- {
-@@ -110,6 +111,7 @@ static inline int strcmp(const char *cs,
- 		: "+a" (cs), "+a" (ct), "=d" (res));
- 	return res;
- }
-+#endif
- 
- #define __HAVE_ARCH_MEMSET
- extern void *memset(void *, int, __kernel_size_t);
---- a/include/asm-m68k/system.h
-+++ b/include/asm-m68k/system.h
-@@ -5,9 +5,24 @@
- #include <linux/kernel.h>
- #include <asm/segment.h>
- #include <asm/entry.h>
-+#include <asm/cfcache.h>
- 
- #ifdef __KERNEL__
- 
-+#ifdef CONFIG_COLDFIRE
-+#define FLUSH_BC        (0x00040000)
-+
-+#define finish_arch_switch(prev) do {		\
-+	unsigned long tmpreg;			\
-+	asm volatile ( "move.l %2,%0\n"		\
-+		       "orl %1,%0\n"		\
-+		       "movec %0,%%cacr"	\
-+		       : "=&d" (tmpreg)		\
-+		       : "id" (FLUSH_BC), "m" (shadow_cacr));	\
-+	} while(0)
-+
-+#endif
-+
- /*
-  * switch_to(n) should switch tasks to task ptr, first checking that
-  * ptr isn't the current task, in which case it does nothing.  This
-@@ -63,16 +78,25 @@ asmlinkage void resume(void);
- #define smp_read_barrier_depends()	((void)0)
- 
- /* interrupt control.. */
--#if 0
--#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
--#else
- #include <linux/hardirq.h>
-+#ifndef CONFIG_COLDFIRE
- #define local_irq_enable() ({							\
- 	if (MACH_IS_Q40 || !hardirq_count())					\
- 		asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory");	\
- })
--#endif
- #define local_irq_disable() asm volatile ("oriw  #0x0700,%%sr": : : "memory")
-+#else /* CONFIG_COLDFIRE */
-+#define local_irq_enable()						\
-+	asm volatile ("move.w %%sr, %%d0\n\t"				\
-+		      "andil #0xf8ff,%%d0\n\t"				\
-+		      "move.w %%d0, %%sr\n"				\
-+		      : : : "cc", "d0", "memory")
-+#define local_irq_disable()						\
-+	asm volatile ("move %/sr,%%d0\n\t"				\
-+		      "ori.l  #0x0700,%%d0\n\t"				\
-+		      "move %%d0,%/sr\n"				\
-+		      : : : "cc", "%d0", "memory")
-+#endif
- #define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
- #define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
- 
---- a/include/asm-m68k/thread_info.h
-+++ b/include/asm-m68k/thread_info.h
-@@ -58,5 +58,6 @@ struct thread_info {
- #define TIF_DELAYED_TRACE	14	/* single step a syscall */
- #define TIF_SYSCALL_TRACE	15	/* syscall trace active */
- #define TIF_MEMDIE		16
-+#define TIF_FREEZE		17	/* freezing processes */
- 
- #endif	/* _ASM_M68K_THREAD_INFO_H */
---- a/include/asm-m68k/tlbflush.h
-+++ b/include/asm-m68k/tlbflush.h
-@@ -2,7 +2,7 @@
- #define _M68K_TLBFLUSH_H
- 
- 
--#ifndef CONFIG_SUN3
-+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
- 
- #include <asm/current.h>
- 
-@@ -92,7 +92,12 @@ static inline void flush_tlb_kernel_rang
- 	flush_tlb_all();
- }
- 
--#else
-+static inline void flush_tlb_pgtables(struct mm_struct *mm,
-+				      unsigned long start, unsigned long end)
-+{
-+}
-+
-+#elif defined(CONFIG_SUN3)
- 
- 
- /* Reserved PMEGs. */
-@@ -214,6 +219,13 @@ static inline void flush_tlb_kernel_page
- 	sun3_put_segmap (addr & ~(SUN3_PMEG_SIZE - 1), SUN3_INVALID_PMEG);
- }
- 
-+static inline void flush_tlb_pgtables(struct mm_struct *mm,
-+				      unsigned long start, unsigned long end)
-+{
-+}
-+
-+#else /* CONFIG_COLDFIRE */
-+#include <asm/cf_tlbflush.h>
- #endif
- 
- #endif /* _M68K_TLBFLUSH_H */
---- a/include/asm-m68k/uaccess.h
-+++ b/include/asm-m68k/uaccess.h
-@@ -1,6 +1,9 @@
- #ifndef __M68K_UACCESS_H
- #define __M68K_UACCESS_H
- 
-+#ifdef CONFIG_COLDFIRE
-+#include <asm/cf_uaccess.h>
-+#else
- /*
-  * User space memory access functions
-  */
-@@ -367,4 +370,5 @@ unsigned long __clear_user(void __user *
- 
- #define strlen_user(str) strnlen_user(str, 32767)
- 
-+#endif /* CONFIG_COLDFIRE */
- #endif /* _M68K_UACCESS_H */
---- a/include/asm-m68k/virtconvert.h
-+++ b/include/asm-m68k/virtconvert.h
-@@ -46,9 +46,14 @@ static inline void *phys_to_virt(unsigne
- #define virt_to_bus(a) (virt_to_phys(a) + (MACH_IS_HADES ? 0x80000000 : 0))
- #define bus_to_virt(a) (phys_to_virt((a) - (MACH_IS_HADES ? 0x80000000 : 0)))
- #else
-+#ifdef CONFIG_COLDFIRE
-+#define virt_to_bus(a) (a - PAGE_OFFSET + PCI_DMA_BASE)
-+#define bus_to_virt(a) (a - PCI_DMA_BASE + PAGE_OFFSET)
-+#else /* CONFIG_COLDFIRE */
- #define virt_to_bus virt_to_phys
- #define bus_to_virt phys_to_virt
- #endif
-+#endif
- 
- #endif
- #endif
---- /dev/null
-+++ b/include/linux/can/dev.h
-@@ -0,0 +1,62 @@
-+/*
-+ * linux/can/dev.h
-+ *
-+ * Definitions for CAN controller network devices lib (work in progress)
-+ *
-+ * * * $Id$
-+ *
-+ * Author: Andrey Volkov <avolkov@varma-el.com>
-+ * Copyright (c) 2006 Varma Electronics Oy
-+ *
-+ */
-+
-+#ifndef CAN_DEVICE_H
-+#define CAN_DEVICE_H
-+
-+#include <linux/version.h>
-+#include <linux/can/error.h>
-+#include <linux/can/ioctl.h>
-+
-+struct can_priv {
-+	struct can_device_stats can_stats;
-+
-+	/* can-bus oscillator frequency, in Hz,
-+	   BE CAREFUL! SOME CONTROLLERS (LIKE SJA1000)
-+	   FOOLISH ABOUT THIS FRQ (for sja1000 as ex. this
-+	   clock must be xtal clock divided by 2). */
-+	u32	can_sys_clock;
-+
-+	/* by default max_brp is equal 64,
-+	   but for a Freescale TouCAN, as ex., it can be 255*/
-+	u32	max_brp;
-+	/* For the mostly all controllers, max_sjw is equal 4, but
-+	   some, hmm, CAN implementations hardwared it to 1 */
-+	u8	max_sjw;
-+
-+	u32	baudrate;	/* in bauds */
-+	struct can_bittime	bit_time;
-+
-+	spinlock_t irq_lock;
-+	/* Please hold this lock when touching net_stats/can_stats*/
-+	spinlock_t stats_lock;
-+
-+	can_state_t state;
-+	can_mode_t  mode;
-+	can_ctrlmode_t ctrlmode;
-+
-+	int (*do_set_bit_time)(struct net_device *dev, struct can_bittime *br);
-+	int (*do_get_state)   (struct net_device *dev, can_state_t *state);
-+	int (*do_set_mode)    (struct net_device *dev, can_mode_t mode);
-+	int (*do_set_ctrlmode)(struct net_device *dev, can_ctrlmode_t ctrlmode);
-+	int (*do_get_ctrlmode)(struct net_device *dev, can_ctrlmode_t *ctrlmode);
-+};
-+
-+#define ND2D(_ndev)		(_ndev->dev.parent)
-+
-+struct net_device *alloc_candev(int sizeof_priv);
-+void free_candev(struct net_device *dev);
-+
-+int can_calc_bit_time(struct can_priv *can, u32 baudrate,
-+		      struct can_bittime_std *bit_time);
-+
-+#endif /* CAN_DEVICE_H */
---- /dev/null
-+++ b/include/linux/can/ioctl.h
-@@ -0,0 +1,152 @@
-+/*
-+ * linux/can/ioctl.h
-+ *
-+ * Definitions for CAN controller setup (work in progress)
-+ *
-+ * $Id$
-+ *
-+ * Send feedback to <socketcan-users@lists.berlios.de>
-+ *
-+ */
-+
-+#ifndef CAN_IOCTL_H
-+#define CAN_IOCTL_H
-+
-+#include <linux/sockios.h>
-+
-+
-+/* max. 16 private ioctls */
-+
-+#define SIOCSCANBAUDRATE	(SIOCDEVPRIVATE+0)
-+#define SIOCGCANBAUDRATE	(SIOCDEVPRIVATE+1)
-+
-+#define SIOCSCANCUSTOMBITTIME   (SIOCDEVPRIVATE+2)
-+#define SIOCGCANCUSTOMBITTIME   (SIOCDEVPRIVATE+3)
-+
-+#define SIOCSCANMODE		(SIOCDEVPRIVATE+4)
-+#define SIOCGCANMODE		(SIOCDEVPRIVATE+5)
-+
-+#define SIOCSCANCTRLMODE	(SIOCDEVPRIVATE+6)
-+#define SIOCGCANCTRLMODE	(SIOCDEVPRIVATE+7)
-+
-+#define SIOCSCANFILTER		(SIOCDEVPRIVATE+8)
-+#define SIOCGCANFILTER		(SIOCDEVPRIVATE+9)
-+
-+#define SIOCGCANSTATE		(SIOCDEVPRIVATE+10)
-+#define SIOCGCANSTATS		(SIOCDEVPRIVATE+11)
-+
-+#define SIOCSCANERRORCONFIG	(SIOCDEVPRIVATE+12)
-+#define SIOCGCANERRORCONFIG	(SIOCDEVPRIVATE+13)
-+
-+/* parameters for ioctls */
-+
-+/* SIOC[SG]CANBAUDRATE */
-+/* baudrate for CAN-controller in bits per second. */
-+/* 0 = Scan for baudrate (Autobaud) */
-+
-+typedef __u32 can_baudrate_t;
-+
-+
-+/* SIOC[SG]CANCUSTOMBITTIME */
-+
-+typedef enum CAN_BITTIME_TYPE {
-+	CAN_BITTIME_STD,
-+	CAN_BITTIME_BTR
-+} can_bittime_type_t;
-+
-+/* TSEG1 of controllers usually is a sum of synch_seg (always 1),
-+ * prop_seg and phase_seg1, TSEG2 = phase_seg2 */
-+
-+struct can_bittime_std {
-+	__u32 brp;        /* baud rate prescaler */
-+	__u8  prop_seg;   /* from 1 to 8 */
-+	__u8  phase_seg1; /* from 1 to 8 */
-+	__u8  phase_seg2; /* from 1 to 8 */
-+	__u8  sjw:7;      /* from 1 to 4 */
-+	__u8  sam:1;      /* 1 - enable triple sampling */
-+};
-+
-+struct can_bittime_btr {
-+	__u8  btr0;
-+	__u8  btr1;
-+};
-+
-+struct can_bittime {
-+	can_bittime_type_t type;
-+	union {
-+		struct can_bittime_std std;
-+		struct can_bittime_btr btr;
-+	};
-+};
-+
-+#define CAN_BAUDRATE_UNCONFIGURED	((__u32) 0xFFFFFFFFU)
-+#define CAN_BAUDRATE_UNKNOWN		0
-+
-+/* SIOC[SG]CANMODE */
-+
-+typedef __u32 can_mode_t;
-+
-+#define CAN_MODE_STOP	0
-+#define CAN_MODE_START	1
-+#define CAN_MODE_SLEEP	2
-+
-+
-+/* SIOC[SG]CANCTRLMODE */
-+
-+typedef __u32 can_ctrlmode_t;
-+
-+#define CAN_CTRLMODE_LOOPBACK   0x1
-+#define CAN_CTRLMODE_LISTENONLY 0x2
-+
-+
-+/* SIOCGCANFILTER */
-+
-+typedef __u32 can_filter_t;
-+
-+/* filter modes (may vary due to controller specific capabilities) */
-+#define CAN_FILTER_CAPAB       0  /* get filter type capabilities
-+				     (32 Bit value) */
-+#define CAN_FILTER_MASK_VALUE  1  /* easy bit filter (see struct can_filter) */
-+#define CAN_FILTER_SFF_BITMASK 2  /* bitfield with 2048 bit SFF filter */
-+				  /* filters 3 - 31 currently undefined */
-+
-+#define CAN_FILTER_MAX         31 /* max. filter type value */
-+
-+
-+/* SIOCGCANSTATE */
-+
-+typedef __u32 can_state_t;
-+
-+#define CAN_STATE_ACTIVE		0
-+#define CAN_STATE_BUS_WARNING		1
-+#define CAN_STATE_BUS_PASSIVE		2
-+#define CAN_STATE_BUS_OFF		3
-+#define CAN_STATE_SCANNING_BAUDRATE	4
-+#define CAN_STATE_STOPPED		5
-+#define CAN_STATE_SLEEPING		6
-+
-+
-+/* SIOCGCANSTATS */
-+
-+struct can_device_stats {
-+	int error_warning;
-+	int data_overrun;
-+	int wakeup;
-+	int bus_error;
-+	int error_passive;
-+	int arbitration_lost;
-+	int restarts;
-+	int bus_error_at_init;
-+};
-+
-+/* SIOC[SG]CANERRORCONFIG */
-+
-+typedef enum CAN_ERRCFG_TYPE {
-+	CAN_ERRCFG_MASK,
-+	CAN_ERRCFG_BUSERR,
-+	CAN_ERRCFG_BUSOFF
-+} can_errcfg_type_t;
-+
-+/* tbd */
-+
-+#endif /* CAN_IOCTL_H */
---- /dev/null
-+++ b/include/linux/can/version.h
-@@ -0,0 +1,22 @@
-+/*
-+ * linux/can/version.h
-+ *
-+ * Version information for the CAN network layer implementation
-+
-+ * Author: Urs Thuermann   <urs.thuermann@volkswagen.de>
-+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
-+ * All rights reserved.
-+ *
-+ * Send feedback to <socketcan-users@lists.berlios.de>
-+ *
-+ */
-+
-+#ifndef CAN_VERSION_H
-+#define CAN_VERSION_H
-+
-+#define RCSID(s) asm(".section .rodata.str1.1,\"aMS\",@progbits,1\n\t" \
-+		     ".string \"" s "\"\n\t.previous\n")
-+
-+RCSID("$Id$");
-+
-+#endif /* CAN_VERSION_H */
---- a/include/linux/fb.h
-+++ b/include/linux/fb.h
-@@ -873,6 +873,17 @@ struct fb_info {
- #define fb_writeq sbus_writeq
- #define fb_memset sbus_memset_io
- 
-+#elif defined(CONFIG_COLDFIRE)
-+#define fb_readb readb
-+#define fb_readw readw
-+#define fb_readl readl
-+#define fb_readq readq
-+#define fb_writeb writeb
-+#define fb_writew writew
-+#define fb_writel writel
-+#define fb_writeq writeq
-+#define fb_memset memset_io
-+
- #elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__) || defined(__avr32__)
- 
- #define fb_readb __raw_readb
-@@ -899,7 +910,7 @@ struct fb_info {
- 
- #endif
- 
--#if defined (__BIG_ENDIAN)
-+#if defined (__BIG_ENDIAN) && !defined(CONFIG_COLDFIRE)
- #define FB_LEFT_POS(bpp)          (32 - bpp)
- #define FB_SHIFT_HIGH(val, bits)  ((val) >> (bits))
- #define FB_SHIFT_LOW(val, bits)   ((val) << (bits))
---- a/include/linux/fsl_devices.h
-+++ b/include/linux/fsl_devices.h
-@@ -91,6 +91,19 @@ enum fsl_usb2_operating_modes {
- 	FSL_USB2_DR_OTG,
- };
- 
-+/* DDD
-+ * replace _operating_modes with _controller
-+ *
-+ * the operating_mode tests in fsl_platform_verify() aren't needed,
-+ * since the ehci driver isn't going to be probe()d unless it's
-+ * "fsl-ehci" device anyway, and what we really need to know is
-+ * which controller (MPH/DR) we're dealing with
-+ */
-+enum fsl_usb2_controller {
-+	FSL_USB2_MPH,
-+	FSL_USB2_DR,
-+};
-+
- enum fsl_usb2_phy_modes {
- 	FSL_USB2_PHY_NONE,
- 	FSL_USB2_PHY_ULPI,
-@@ -101,9 +114,36 @@ enum fsl_usb2_phy_modes {
- 
- struct fsl_usb2_platform_data {
- 	/* board specific information */
--	enum fsl_usb2_operating_modes	operating_mode;
-+	/*
-+	 * DDD see note above
-+	 * enum fsl_usb2_operating_modes	operating_mode;
-+	 */
-+	enum fsl_usb2_controller	controller;
- 	enum fsl_usb2_phy_modes		phy_mode;
- 	unsigned int			port_enables;
-+	/*
-+	 * DDD this could arguably be moved to a separate
-+	 * fsl usb2 device header file
-+	 */
-+	char *name;			/* pretty print */
-+	int (*platform_init) (struct platform_device *);
-+	void (*platform_uninit) (struct platform_device *);
-+	int (*platform_verify) (struct platform_device *);
-+	u32				xcvr_type;	/* PORTSCX_PTS_* */
-+	u32				view;		/* ULPI viewport register */
-+	u32				r_start;	/* start of MEM resource */
-+	u32				r_len;		/* length of MEM resource */
-+	void __iomem			*regs;		/* ioremap'd register base */
-+	unsigned			big_endian_mmio : 1;
-+	unsigned			big_endian_desc : 1;
-+	unsigned			es : 1;		/* need USBMODE:ES */
-+	unsigned			have_sysif_regs : 1;
-+	unsigned			le_setup_buf : 1;
-+	unsigned			does_otg : 1;	/* set IFF it's an OTG port */
-+
-+	unsigned			power_budget;	/* for hcd->power_budget */
-+	struct fsl_xcvr_ops		*xcvr_ops;
-+	int				max_ep_nr;	/* max # of endpoints */
- };
- 
- /* Flags in fsl_usb2_mph_platform_data */
-@@ -126,5 +166,16 @@ struct mpc8xx_pcmcia_ops {
- 	int(*voltage_set)(int slot, int vcc, int vpp);
- };
- 
-+struct fsl_ata_platform_data {
-+#ifdef	CONFIG_FSL_PATA_USE_DMA
-+	int	udma_mask;	/* UDMA modes h/w can handle */
-+	int	fifo_alarm;	/* value for fifo_alarm reg */
-+	int	max_sg;		/* longest sglist h/w can handle */
-+#endif
-+	int	(*init)(struct platform_device *pdev);
-+	void	(*exit)(void);
-+	int	(*get_clk_rate)(void);
-+};
-+
- #endif /* _FSL_DEVICE_H_ */
- #endif /* __KERNEL__ */
---- a/include/linux/pci.h
-+++ b/include/linux/pci.h
-@@ -458,8 +458,10 @@ int __must_check pcibios_enable_device(s
- char *pcibios_setup(char *str);
- 
- /* Used only when drivers/pci/setup.c is used */
-+#ifndef CONFIG_COLDFIRE
- void pcibios_align_resource(void *, struct resource *, resource_size_t,
- 				resource_size_t);
-+#endif
- void pcibios_update_irq(struct pci_dev *, int irq);
- 
- /* Generic PCI functions used internally */
---- /dev/null
-+++ b/include/linux/spi/mcfqspi.h
-@@ -0,0 +1,80 @@
-+/****************************************************************************/
-+
-+/*
-+ *	mcfqspi.c - Master QSPI controller for the ColdFire processors
-+ *
-+ *	(C) Copyright 2005, Intec Automation,
-+ *			    Mike Lavender (mike@steroidmicros)
-+ *
-+
-+     This program is free software; you can redistribute it and/or modify
-+     it under the terms of the GNU General Public License as published by
-+     the Free Software Foundation; either version 2 of the License, or
-+     (at your option) any later version.
-+
-+     This program is distributed in the hope that it will be useful,
-+     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+     GNU General Public License for more details.
-+
-+     You should have received a copy of the GNU General Public License
-+     along with this program; if not, write to the Free Software
-+     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
-+/* ------------------------------------------------------------------------- */
-+
-+#ifndef MCFQSPI_H_
-+#define MCFQSPI_H_
-+
-+#define QSPI_CS_INIT		0x01
-+#define QSPI_CS_ASSERT		0x02
-+#define QSPI_CS_DROP		0x04
-+
-+#define QSPIIOCS_DOUT_HIZ	1	/* QMR[DOHIE] set hi-z dout between transfers */
-+#define QSPIIOCS_BITS		2	/* QMR[BITS] set transfer size */
-+#define QSPIIOCG_BITS		3	/* QMR[BITS] get transfer size */
-+#define QSPIIOCS_CPOL		4	/* QMR[CPOL] set SCK inactive state */
-+#define QSPIIOCS_CPHA		5	/* QMR[CPHA] set SCK phase, 1=rising edge */
-+#define QSPIIOCS_BAUD		6	/* QMR[BAUD] set SCK baud rate divider */
-+#define QSPIIOCS_QCD		7	/* QDLYR[QCD] set start delay */
-+#define QSPIIOCS_DTL		8	/* QDLYR[DTL] set after delay */
-+#define QSPIIOCS_CONT		9	/* continuous CS asserted during transfer */
-+#define QSPIIOCS_READDATA	10	/* set data send during read */
-+#define QSPIIOCS_ODD_MOD	11	/* if length of buffer is a odd number, 16-bit transfers */
-+					/* are finalized with a 8-bit transfer */
-+#define QSPIIOCS_DSP_MOD	12	/* transfers are bounded to 15/30 bytes (a multiple of 3 bytes = 1 DSPword) */
-+#define QSPIIOCS_POLL_MOD	13	/* driver uses polling instead of interrupts */
-+
-+#define QSPIIOCS_SET_CSIV	14	/* sets CSIV flag (cs inactive level) */
-+
-+#ifdef CONFIG_M520x
-+#undef  MCF_GPIO_PAR_QSPI
-+#define MCF_GPIO_PAR_QSPI      (0xA4034)
-+#endif
-+
-+struct coldfire_spi_master {
-+	u16 bus_num;
-+	u16 num_chipselect;
-+	u8  irq_source;
-+	u32 irq_vector;
-+	u32 irq_mask;
-+	u8  irq_lp;
-+	u8  par_val;
-+	u16 par_val16;
-+	void (*cs_control)(u8 cs, u8 command);
-+};
-+
-+
-+struct coldfire_spi_chip {
-+	u8 mode;
-+	u8 bits_per_word;
-+	u8 del_cs_to_clk;
-+	u8 del_after_trans;
-+	u16 void_write_data;
-+};
-+
-+typedef struct qspi_read_data {
-+        __u32 length;
-+        __u8 *buf;                   /* data to send during read */
-+        unsigned int loop : 1;
-+} qspi_read_data;
-+#endif /*MCFQSPI_H_*/
---- /dev/null
-+++ b/include/linux/usb/fsl_usb2.h
-@@ -0,0 +1,463 @@
-+/*
-+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+
-+/*
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/*
-+ * Freescale USB device/endpoint management registers
-+ */
-+#ifndef __FSL_USB2_H
-+#define __FSL_USB2_H
-+
-+
-+ /* USB DR device mode registers (Little Endian) */
-+struct fsl_usb_device_regs {
-+	/* Capability register */
-+	u32 id;
-+	u32 res1[63];
-+	u16 caplength;		/* Capability Register Length */
-+	u16 hciversion;		/* Host Controller Interface Version */
-+	u32 hcsparams;		/* Host Controller Structual Parameters */
-+	u32 hccparams;		/* Host Controller Capability Parameters */
-+	u32 res2[5];
-+	u32 dciversion;		/* Device Controller Interface Version */
-+	u32 dccparams;		/* Device Controller Capability Parameters */
-+	u32 res3[6];
-+	/* Operation register */
-+	u32 usbcmd;		/* USB Command Register */
-+	u32 usbsts;		/* USB Status Register */
-+	u32 usbintr;		/* USB Interrupt Enable Register */
-+	u32 frindex;		/* Frame Index Register */
-+	u32 res4;
-+	u32 deviceaddr;		/* Device Address */
-+	u32 endpointlistaddr;	/* Endpoint List Address Register */
-+	u32 res5;
-+	u32 burstsize;		/* Master Interface Data Burst Size Register */
-+	u32 txttfilltuning;	/* Transmit FIFO Tuning Controls Register */
-+	u32 res6[2];
-+	u32 ulpiview;
-+	u32 res7[3];
-+	u32 configflag;		/* Configure Flag Register */
-+	u32 portsc1;		/* Port 1 Status and Control Register */
-+	u32 res8[7];
-+	u32 otgsc;		/* On-The-Go Status and Control */
-+	u32 usbmode;		/* USB Mode Register */
-+	u32 endptsetupstat;	/* Endpoint Setup Status Register */
-+	u32 endpointprime;	/* Endpoint Initialization Register */
-+	u32 endptflush;		/* Endpoint Flush Register */
-+	u32 endptstatus;	/* Endpoint Status Register */
-+	u32 endptcomplete;	/* Endpoint Complete Register */
-+#if 0
-+	u32 endptctrl[USB_MAX_ENDPOINTS]; /* Endpoint Control Registers */
-+#else
-+	// DDD see DCCPARAMS:DEN for the real number of device endpoints
-+	// DDD 16 is the max
-+	u32 endptctrl[16];	/* Endpoint Control Registers */
-+#endif
-+};
-+
-+ /* USB DR host mode registers (Little Endian) */
-+struct fsl_usb_host_regs {
-+	/* Capability register */
-+	u32 id;
-+	u32 res1[63];
-+	u16 caplength;		/* Capability Register Length */
-+	u16 hciversion;		/* Host Controller Interface Version */
-+	u32 hcsparams;		/* Host Controller Structual Parameters */
-+	u32 hccparams;		/* Host Controller Capability Parameters */
-+	u32 res2[5];
-+	u32 dciversion;		/* Device Controller Interface Version */
-+	u32 dccparams;		/* Device Controller Capability Parameters */
-+	u32 res3[6];
-+	/* Operation register */
-+	u32 usbcmd;		/* USB Command Register */
-+	u32 usbsts;		/* USB Status Register */
-+	u32 usbintr;		/* USB Interrupt Enable Register */
-+	u32 frindex;		/* Frame Index Register */
-+	u32 res4;
-+	u32 periodiclistbase;	/* Periodic Frame List Base Address Register */
-+	u32 asynclistaddr;	/* Current Asynchronous List Address Register */
-+	u32 res5;
-+	u32 burstsize;		/* Master Interface Data Burst Size Register */
-+	u32 txttfilltuning;	/* Transmit FIFO Tuning Controls Register */
-+	u32 res6[2];
-+	u32 ulpiview;
-+	u32 res7[3];
-+	u32 configflag;		/* Configure Flag Register */
-+	u32 portsc1;		/* Port 1 Status and Control Register */
-+	u32 res8[7];
-+	u32 otgsc;		/* On-The-Go Status and Control */
-+	u32 usbmode;		/* USB Mode Register */
-+	u32 endptsetupstat;	/* Endpoint Setup Status Register */
-+	u32 endpointprime;	/* Endpoint Initialization Register */
-+	u32 endptflush;		/* Endpoint Flush Register */
-+	u32 endptstatus;	/* Endpoint Status Register */
-+	u32 endptcomplete;	/* Endpoint Complete Register */
-+#if 0
-+	u32 endptctrl[USB_MAX_ENDPOINTS]; /* Endpoint Control Registers */
-+#else
-+	/* DDD see DCCPARAMS:DEN for the real number of device endpoints */
-+	/* DDD 16 is the max */
-+	u32 endptctrl[16];	/* Endpoint Control Registers */
-+#endif
-+};
-+
-+ /* non-EHCI USB system interface registers (Big Endian) */
-+struct usb_sys_interface {
-+	u32 snoop1;
-+	u32 snoop2;
-+	u32 age_cnt_thresh;	/* Age Count Threshold Register */
-+	u32 pri_ctrl;		/* Priority Control Register */
-+	u32 si_ctrl;		/* System Interface Control Register */
-+	u32 res[59];
-+	u32 control;		/* General Purpose Control Register */
-+};
-+
-+/* ep0 transfer state */
-+#define WAIT_FOR_SETUP		0
-+#define DATA_STATE_XMIT		1
-+#define DATA_STATE_NEED_ZLP	2
-+#define WAIT_FOR_OUT_STATUS	3
-+#define DATA_STATE_RECV		4
-+
-+/* Frame Index Register Bit Masks */
-+#define	USB_FRINDEX_MASKS			0x3fff
-+
-+
-+
-+/* USBCMD Register Bit Masks */
-+#define USB_CMD_RUN_STOP			0x00000001
-+#define USB_CMD_CTRL_RESET			0x00000002
-+#define USB_CMD_PERIODIC_SCHEDULE_EN		0x00000010
-+#define USB_CMD_ASYNC_SCHEDULE_EN		0x00000020
-+#define USB_CMD_INT_AA_DOORBELL			0x00000040
-+#define USB_CMD_ASP				0x00000300
-+#define USB_CMD_ASYNC_SCH_PARK_EN		0x00000800
-+#define USB_CMD_SUTW				0x00002000
-+#define USB_CMD_ATDTW				0x00004000
-+#define USB_CMD_ITC				0x00FF0000
-+
-+/* bit 15,3,2 are frame list size */
-+#define USB_CMD_FRAME_SIZE_1024			0x00000000
-+#define USB_CMD_FRAME_SIZE_512			0x00000004
-+#define USB_CMD_FRAME_SIZE_256			0x00000008
-+#define USB_CMD_FRAME_SIZE_128			0x0000000C
-+#define USB_CMD_FRAME_SIZE_64			0x00008000
-+#define USB_CMD_FRAME_SIZE_32			0x00008004
-+#define USB_CMD_FRAME_SIZE_16			0x00008008
-+#define USB_CMD_FRAME_SIZE_8			0x0000800C
-+
-+/* bit 9-8 are async schedule park mode count */
-+#define USB_CMD_ASP_00				0x00000000
-+#define USB_CMD_ASP_01				0x00000100
-+#define USB_CMD_ASP_10				0x00000200
-+#define USB_CMD_ASP_11				0x00000300
-+#define USB_CMD_ASP_BIT_POS			8
-+
-+/* bit 23-16 are interrupt threshold control */
-+#define USB_CMD_ITC_NO_THRESHOLD		0x00000000
-+#define USB_CMD_ITC_1_MICRO_FRM			0x00010000
-+#define USB_CMD_ITC_2_MICRO_FRM			0x00020000
-+#define USB_CMD_ITC_4_MICRO_FRM			0x00040000
-+#define USB_CMD_ITC_8_MICRO_FRM			0x00080000
-+#define USB_CMD_ITC_16_MICRO_FRM		0x00100000
-+#define USB_CMD_ITC_32_MICRO_FRM		0x00200000
-+#define USB_CMD_ITC_64_MICRO_FRM		0x00400000
-+#define USB_CMD_ITC_BIT_POS			16
-+
-+
-+
-+
-+/* USB STS Register Bit Masks */
-+#define USB_STS_INT				0x00000001
-+#define USB_STS_ERR				0x00000002
-+#define USB_STS_PORT_CHANGE			0x00000004
-+#define USB_STS_FRM_LST_ROLL			0x00000008
-+#define USB_STS_SYS_ERR				0x00000010
-+#define USB_STS_IAA				0x00000020
-+#define USB_STS_RESET				0x00000040
-+#define USB_STS_SOF				0x00000080
-+#define USB_STS_SUSPEND				0x00000100
-+#define USB_STS_HC_HALTED			0x00001000
-+#define USB_STS_RCL				0x00002000
-+#define USB_STS_PERIODIC_SCHEDULE		0x00004000
-+#define USB_STS_ASYNC_SCHEDULE			0x00008000
-+
-+/* USB INTR Register Bit Masks */
-+#define USB_INTR_INT_EN				0x00000001
-+#define USB_INTR_ERR_INT_EN			0x00000002
-+#define USB_INTR_PTC_DETECT_EN			0x00000004
-+#define USB_INTR_FRM_LST_ROLL_EN		0x00000008
-+#define USB_INTR_SYS_ERR_EN			0x00000010
-+#define USB_INTR_ASYN_ADV_EN			0x00000020
-+#define USB_INTR_RESET_EN			0x00000040
-+#define USB_INTR_SOF_EN				0x00000080
-+#define USB_INTR_DEVICE_SUSPEND			0x00000100
-+
-+/* Device Address bit masks */
-+#define USB_DEVICE_ADDRESS_MASK			0xFE000000
-+#define USB_DEVICE_ADDRESS_BIT_POS		25
-+
-+/* endpoint list address bit masks */
-+#define USB_EP_LIST_ADDRESS_MASK		0xfffff800
-+
-+
-+/* x_PORTSCx */
-+/* bit 31-30 are port transceiver select */
-+#define PORTSCX_PTS_MASK		(3 << 30)	/* parallel xcvr select mask */
-+#define PORTSCX_PHY_TYPE_SEL		PORTSCX_PTS_MASK
-+#define PORTSCX_PTS_UTMI		(0 << 30)	/* UTMI/UTMI+ */
-+#define PORTSCX_PTS_PHILIPS		(1 << 30)	/* Philips classic */
-+#define PORTSCX_PTS_ULPI		(2 << 30)	/* ULPI */
-+#define PORTSCX_PTS_SERIAL		(3 << 30)	/* serial */
-+#define PORTSCX_PTS_FSLS		PORTSCX_PTS_SERIAL
-+#define PORTSCX_PTS_ONCHIP		PORTSCX_PTS_FSLS
-+
-+#define PORTSCX_STS			(1 << 29)	/* serial xcvr select */
-+
-+/* bit 28 is parallel transceiver width for UTMI interface */
-+#define PORTSCX_PTW_8BIT		(0 << 28)	/* 8 bit parallel xcvr */
-+#define PORTSCX_PTW_16BIT		(1 << 28)	/* 16 bi parallel xcvr */
-+
-+/* bit 27-26 are port speed */
-+#define PORTSCX_PORT_SPEED_FULL		(0 << 26)
-+#define PORTSCX_PORT_SPEED_LOW		(1 << 26)
-+#define PORTSCX_PORT_SPEED_HIGH		(2 << 26)
-+#define PORTSCX_PORT_SPEED_UNDEF	(3 << 26)
-+#define PORTSCX_PORT_SPEED_MASK		(3 << 26)
-+
-+#define PORTSCX_PHY_LOW_POWER_SPD	(1 << 23)	/* phy low pwr suspend/clk disable */
-+
-+/* bit 19-16 are port test control */
-+#define PORTSCX_PTC_DISABLE		(0 << 16)
-+#define PORTSCX_PTC_JSTATE		(1 << 16)
-+#define PORTSCX_PTC_KSTATE		(2 << 16)
-+#define PORTSCX_PTC_SEQNAK		(3 << 16)	/* SE0 (host) / NAK (device) */
-+#define PORTSCX_PTC_PACKET		(4 << 16)
-+#define PORTSCX_PTC_FORCE_EN_HS		(5 << 16)
-+#define PORTSCX_PTC_FORCE_EN_FS		(6 << 16)
-+#define PORTSCX_PTC_FORCE_EN_LS		(7 << 16)
-+
-+
-+/* bit 15-14 are port indicator control */
-+#define PORTSCX_PIC_OFF			(0 << 14)
-+#define PORTSCX_PIC_AMBER		(1 << 14)
-+#define PORTSCX_PIC_GREEN		(2 << 14)
-+#define PORTSCX_PIC_UNDEF		(3 << 14)
-+
-+#define PORTSCX_PORT_POWER		(1 << 12)	/* port power */
-+
-+/* bit 11-10 are line status */
-+#define PORTSCX_LS_MASK			(3 << 10)	/* Line State mask */
-+#define PORTSCX_LS_SE0			(0 << 10)	/* SE0     */
-+#define PORTSCX_LS_K_STATE		(1 << 10)	/* K-state */
-+#define PORTSCX_LS_J_STATE		(2 << 10)	/* J-state */
-+
-+#define PORTSCX_PORT_RESET		(1 <<  8)	/* Port reset */
-+#define PORTSCX_PORT_SUSPEND		(1 <<  7)	/* Suspend */
-+#define PORTSCX_PORT_FORCE_RESUME	(1 <<  6)	/* Force port resume */
-+#define PORTSCX_OVER_CURRENT_CHG	(1 <<  5)	/* over current change */
-+#define PORTSCX_OVER_CURRENT_ACT	(1 <<  4)	/* over currrent active */
-+#define PORTSCX_PORT_EN_DIS_CHANGE	(1 <<  3)	/* port {en,dis}able change */
-+#define PORTSCX_PORT_ENABLE		(1 <<  2)	/* port enabled */
-+#define PORTSCX_CONNECT_STATUS_CHANGE	(1 <<  1)	/* connect status change */
-+#define PORTSCX_CURRENT_CONNECT_STATUS	(1 <<  0)	/* current connect status */
-+
-+#define PORTSCX_W1C_BITS                     \
-+       ( PORTSCX_CONNECT_STATUS_CHANGE |     \
-+         PORTSCX_PORT_EN_DIS_CHANGE    |     \
-+         PORTSCX_OVER_CURRENT_CHG )
-+
-+
-+
-+/* UOG_OTGSC Register Bits */
-+/* control bits: */
-+#define  OTGSC_CTRL_VBUS_DISCHARGE	(1 <<  0)
-+#define  OTGSC_CTRL_VBUS_CHARGE		(1 <<  1)
-+#define  OTGSC_CTRL_OTG_TERM		(1 <<  3)	/* controls DM pulldown */
-+#define  OTGSC_CTRL_DATA_PULSING	(1 <<  4)
-+#define  OTGSC_CTRL_USB_ID_PU		(1 <<  5)	/* enable ID pullup */
-+/* current status: (R/O) */
-+#define  OTGSC_STS_USB_ID		(1 <<  8)	/* 0=A-device  1=B-device */
-+#define  OTGSC_STS_A_VBUS_VALID		(1 <<  9)
-+#define  OTGSC_STS_A_SESSION_VALID	(1 << 10)
-+#define  OTGSC_STS_B_SESSION_VALID	(1 << 11)
-+#define  OTGSC_STS_B_SESSION_END	(1 << 12)
-+#define  OTGSC_STS_1ms_TIMER		(1 << 13)
-+#define  OTGSC_STS_DATA_PULSE		(1 << 14)
-+/* interrupt status: (write to clear) */
-+#define  OTGSC_INTSTS_MASK		(0x7f << 16)
-+#define  OTGSC_INTSTS_USB_ID		(1 << 16)
-+#define  OTGSC_INTSTS_A_VBUS_VALID	(1 << 17)
-+#define  OTGSC_INTSTS_A_SESSION_VALID	(1 << 18)
-+#define  OTGSC_INTSTS_B_SESSION_VALID	(1 << 19)
-+#define  OTGSC_INTSTS_B_SESSION_END	(1 << 20)
-+#define  OTGSC_INTSTS_1MS_TIMER		(1 << 21)
-+#define  OTGSC_INTSTS_DATA_PULSE	(1 << 22)
-+/* interrupt enables: */
-+#define  OTGSC_IE_MASK			(0x7f << 24)
-+#define  OTGSC_IE_USB_ID		(1 << 24)
-+#define  OTGSC_IE_A_VBUS_VALID		(1 << 25)
-+#define  OTGSC_IE_A_SESSION_VALID	(1 << 26)
-+#define  OTGSC_IE_B_SESSION_VALID	(1 << 27)
-+#define  OTGSC_IE_B_SESSION_END		(1 << 28)
-+#define  OTGSC_IE_1ms_TIMER		(1 << 29)
-+#define  OTGSC_IE_DATA_PULSE		(1 << 30)
-+
-+#if 1	/* DDD FIXME these here for compatibility between my names and Leo's */
-+/* OTG interrupt enable bit masks */
-+#define  OTGSC_INTERRUPT_ENABLE_BITS_MASK	OTGSC_IE_MASK
-+
-+/* OTG interrupt status bit masks */
-+#define  OTGSC_INTERRUPT_STATUS_BITS_MASK	OTGSC_INTSTS_MASK
-+#endif // 1
-+
-+
-+
-+/* x_USBMODE */
-+#undef USBMODE_SDIS	/* defined as bit 3 in drivers/usb/host/ehci.h */
-+#define USBMODE_SDIS		(1 << 4)	/* stream disable mode */
-+#define USBMODE_SLOM		(1 << 3)	/* setup lockout mode */
-+#define USBMODE_ES		(1 << 2)	/* (big) endian select */
-+#define USBMODE_CM_MASK		(3 << 0)	/* controller mode mask */
-+#define USBMODE_CM_HOST		(3 << 0)	/* host */
-+#define USBMODE_CM_DEVICE	(2 << 0)	/* device */
-+// DDD #define USBMODE_CM_IDLE		(0 << 0)	/* idle */
-+
-+/* DDD for compatibility for now */
-+#define USB_MODE_CTRL_MODE_IDLE		USBMODE_CM_IDLE
-+#define USB_MODE_CTRL_MODE_DEVICE	USBMODE_CM_DEVICE
-+#define USB_MODE_CTRL_MODE_HOST		USBMODE_CM_HOST
-+#define USB_MODE_SETUP_LOCK_OFF		USBMODE_SLOM
-+#define USB_MODE_STREAM_DISABLE		USBMODE_SDIS
-+
-+
-+/* ULPIVIEW register bits */
-+#define ULPIVW_WU		(1 << 31)	/* Wakeup */
-+#define ULPIVW_RUN		(1 << 30)	/* read/write run */
-+#define ULPIVW_WRITE		(1 << 29)	/* 0=read  1=write */
-+#define ULPIVW_SS		(1 << 27)	/* SyncState */
-+#define ULPIVW_PORT_MASK	0x07		/* Port field */
-+#define ULPIVW_PORT_SHIFT	24
-+#define ULPIVW_ADDR_MASK	0xFF		/* data address field */
-+#define ULPIVW_ADDR_SHIFT	16
-+#define ULPIVW_RDATA_MASK	0xFF		/* read data field */
-+#define ULPIVW_RDATA_SHIFT	8
-+#define ULPIVW_WDATA_MASK	0xFF		/* write data field */
-+#define ULPIVW_WDATA_SHIFT	0
-+
-+
-+/* Endpoint Flush Register */
-+#define EPFLUSH_TX_OFFSET			0x00010000
-+#define EPFLUSH_RX_OFFSET			0x00000000
-+
-+/* Endpoint Setup Status bit masks */
-+#define EP_SETUP_STATUS_MASK			0x0000003F
-+#define EP_SETUP_STATUS_EP0			0x00000001
-+
-+/* ENDPOINTCTRLx  Register Bit Masks */
-+#define EPCTRL_TX_ENABLE			0x00800000
-+#define EPCTRL_TX_DATA_TOGGLE_RST		0x00400000	/* Not EP0 */
-+#define EPCTRL_TX_DATA_TOGGLE_INH		0x00200000	/* Not EP0 */
-+#define EPCTRL_TX_TYPE				0x000C0000
-+#define EPCTRL_TX_DATA_SOURCE			0x00020000	/* Not EP0 */
-+#define EPCTRL_TX_EP_STALL			0x00010000
-+#define EPCTRL_RX_ENABLE			0x00000080
-+#define EPCTRL_RX_DATA_TOGGLE_RST		0x00000040	/* Not EP0 */
-+#define EPCTRL_RX_DATA_TOGGLE_INH		0x00000020	/* Not EP0 */
-+#define EPCTRL_RX_TYPE				0x0000000C
-+#define EPCTRL_RX_DATA_SINK			0x00000002	/* Not EP0 */
-+#define EPCTRL_RX_EP_STALL			0x00000001
-+
-+/* bit 19-18 and 3-2 are endpoint type */
-+#define EPCTRL_EP_TYPE_CONTROL			0
-+#define EPCTRL_EP_TYPE_ISO			1
-+#define EPCTRL_EP_TYPE_BULK			2
-+#define EPCTRL_EP_TYPE_INTERRUPT		3
-+#define EPCTRL_TX_EP_TYPE_SHIFT			18
-+#define EPCTRL_RX_EP_TYPE_SHIFT			2
-+
-+/* SNOOPn Register Bit Masks */
-+#define SNOOP_ADDRESS_MASK			0xFFFFF000
-+#define SNOOP_SIZE_ZERO				0x00	/* snooping disable */
-+#define SNOOP_SIZE_4KB				0x0B	/* 4KB snoop size */
-+#define SNOOP_SIZE_8KB				0x0C
-+#define SNOOP_SIZE_16KB				0x0D
-+#define SNOOP_SIZE_32KB				0x0E
-+#define SNOOP_SIZE_64KB				0x0F
-+#define SNOOP_SIZE_128KB			0x10
-+#define SNOOP_SIZE_256KB			0x11
-+#define SNOOP_SIZE_512KB			0x12
-+#define SNOOP_SIZE_1MB				0x13
-+#define SNOOP_SIZE_2MB				0x14
-+#define SNOOP_SIZE_4MB				0x15
-+#define SNOOP_SIZE_8MB				0x16
-+#define SNOOP_SIZE_16MB				0x17
-+#define SNOOP_SIZE_32MB				0x18
-+#define SNOOP_SIZE_64MB				0x19
-+#define SNOOP_SIZE_128MB			0x1A
-+#define SNOOP_SIZE_256MB			0x1B
-+#define SNOOP_SIZE_512MB			0x1C
-+#define SNOOP_SIZE_1GB				0x1D
-+#define SNOOP_SIZE_2GB				0x1E	/* 2GB snoop size */
-+
-+/* pri_ctrl Register Bit Masks */
-+#define PRI_CTRL_PRI_LVL1			0x0000000C
-+#define PRI_CTRL_PRI_LVL0			0x00000003
-+
-+/* si_ctrl Register Bit Masks */
-+#define SI_CTRL_ERR_DISABLE			0x00000010
-+#define SI_CTRL_IDRC_DISABLE			0x00000008
-+#define SI_CTRL_RD_SAFE_EN			0x00000004
-+#define SI_CTRL_RD_PREFETCH_DISABLE		0x00000002
-+#define SI_CTRL_RD_PREFEFETCH_VAL		0x00000001
-+
-+
-+/* control Register Bit Masks */
-+#define USB_CTRL_IOENB				0x00000004
-+#define USB_CTRL_ULPI_INT0EN			0x00000001
-+
-+
-+/* Endpoint Transfer Descriptor bit Masks */
-+#define DTD_NEXT_TERMINATE			0x00000001
-+#define DTD_IOC					0x00008000
-+#define DTD_STATUS_ACTIVE			0x00000080
-+#define DTD_STATUS_HALTED			0x00000040
-+#define DTD_STATUS_DATA_BUFF_ERR		0x00000020
-+#define DTD_STATUS_TRANSACTION_ERR		0x00000008
-+#define DTD_RESERVED_FIELDS			0x80007300
-+#define DTD_ADDR_MASK				0xFFFFFFE0
-+#define DTD_PACKET_SIZE				0x7FFF0000
-+#define DTD_LENGTH_BIT_POS			16
-+#define DTD_ERROR_MASK (DTD_STATUS_HALTED | \
-+			DTD_STATUS_DATA_BUFF_ERR | \
-+			DTD_STATUS_TRANSACTION_ERR)
-+/* Alignment requirements; must be a power of two */
-+#define DTD_ALIGNMENT				0x20
-+#define QH_ALIGNMENT				2048
-+
-+/* Controller dma boundary */
-+#define UDC_DMA_BOUNDARY			0x1000
-+
-+#if defined CONFIG_PPC32
-+#define fsl_readl(addr)		in_le32((addr))
-+#define fsl_writel(addr, val32)	out_le32((addr), (val32))
-+#elif defined CONFIG_COLDFIRE
-+#define fsl_readl(addr)		in_be32((__force unsigned *)(addr))
-+#define fsl_writel(val32, addr)	out_be32((__force unsigned *)(addr), (val32))
-+
-+#define fsl_readw(addr)		in_be16((__force unsigned *)(addr))
-+#define fsl_writew(val16, addr)	out_be16((__force unsigned *)(addr), (val16))
-+#else
-+#error fsl_{readl, writel} must be defined
-+#endif
-+
-+#endif	/* __FSL_USB2_H */
---- /dev/null
-+++ b/include/linux/usb/fsl_xcvr.h
-@@ -0,0 +1,42 @@
-+/*
-+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
-+ */
-+
-+/*
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+enum fsl_usb_ctrlr {
-+	USB_CTRLR_H1 = 0,
-+	USB_CTRLR_H2 = 1,
-+	USB_CTRLR_OTG = 2,
-+};
-+
-+
-+/**
-+ * struct fsl_xcvr_ops - USB transceiver operations
-+ *
-+ * @xcvr_type: one of PORTSCX_PTS_{UTMI,SERIAL,ULPI}
-+ * @init: transceiver- and board-specific initialization function
-+ * @uninit: transceiver- and board-specific uninitialization function
-+ * @set_host:
-+ * @set_device:
-+ *
-+ */
-+struct fsl_xcvr_ops {
-+	enum fsl_usb_ctrlr ctrlr;	/* H1, H2, OTG */
-+	u32 xcvr_type;
-+
-+	void (*init)(struct platform_device *pdev);
-+	void (*uninit)(struct platform_device *pdev);
-+	void (*set_host)(void);	/* DDD combine set_host and _device ? */
-+	void (*set_device)(void);
-+	void (*set_vbus_power)(struct fsl_usb2_platform_data *pdata, int on);
-+};
-+
-+
---- /dev/null
-+++ b/net/can/dev.c
-@@ -0,0 +1,292 @@
-+/*
-+ * $Id$
-+ *
-+ * Copyright (C) 2005 Marc Kleine-Budde, Pengutronix
-+ * Copyright (C) 2006 Andrey Volkov, Varma Electronics
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/netdevice.h>
-+#include <linux/if_arp.h>
-+#include <linux/can.h>
-+#include <linux/can/dev.h>
-+
-+MODULE_DESCRIPTION("CAN netdevice library");
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Marc Kleine-Budde <mkl@pengutronix.de>, "
-+	      "Andrey Volkov <avolkov@varma-el.com>");
-+
-+/*
-+ Abstract:
-+	Baud rate calculated with next formula:
-+	baud = frq/(brp*(1 + prop_seg+ phase_seg1 + phase_seg2))
-+
-+	This calc function based on work of Florian Hartwich and Armin Bassemi
-+	"The Configuration of the CAN Bit Timing"
-+	(http://www.semiconductors.bosch.de/pdf/CiA99Paper.pdf)
-+
-+ Parameters:
-+  [in]
-+    bit_time_nsec - expected bit time in nanosecs
-+
-+  [out]
-+	bit_time	- calculated time segments, for meaning of
-+			  each field read CAN standard.
-+*/
-+
-+#define DEFAULT_MAX_BRP			64U
-+#define DEFAULT_MAX_SJW			4U
-+
-+/* All below values in tq units */
-+#define MAX_BIT_TIME	25U
-+#define MIN_BIT_TIME	8U
-+#define MAX_PROP_SEG	8U
-+#define MAX_PHASE_SEG1	8U
-+#define MAX_PHASE_SEG2	8U
-+
-+int can_calc_bit_time(struct can_priv *can, u32 baudrate,
-+		      struct can_bittime_std *bit_time)
-+{
-+	int best_error  = -1; /* Ariphmetic error */
-+	int df, best_df = -1; /* oscillator's tolerance range */
-+	u32 quanta;	      /*in tq units*/
-+	u32 brp, phase_seg1, phase_seg2, sjw, prop_seg;
-+	u32 brp_min, brp_max, brp_expected;
-+	u64 tmp;
-+
-+	/* baudrate range [1baud,1Mbaud] */
-+	if (baudrate == 0 || baudrate > 1000000UL)
-+		return -EINVAL;
-+
-+	tmp = (u64)can->can_sys_clock*1000;
-+	do_div(tmp, baudrate);
-+	brp_expected = (u32)tmp;
-+
-+	brp_min = brp_expected / (1000 * MAX_BIT_TIME);
-+	if (brp_min == 0)
-+		brp_min = 1;
-+	if (brp_min > can->max_brp)
-+		return -ERANGE;
-+
-+	brp_max = (brp_expected + 500 * MIN_BIT_TIME) / (1000 * MIN_BIT_TIME);
-+	if (brp_max == 0)
-+		brp_max = 1;
-+	if (brp_max > can->max_brp)
-+		brp_max = can->max_brp;
-+
-+	for (brp = brp_min; brp <= brp_max; brp++) {
-+		quanta = brp_expected / (brp * 1000);
-+		if (quanta < MAX_BIT_TIME && quanta * brp * 1000 !=
-+				brp_expected)
-+			quanta++;
-+		if (quanta < MIN_BIT_TIME || quanta > MAX_BIT_TIME)
-+			continue;
-+
-+		phase_seg2 = min((quanta - 3) / 2, MAX_PHASE_SEG2);
-+		for (sjw = can->max_sjw; sjw > 0; sjw--) {
-+			for (; phase_seg2 > sjw; phase_seg2--) {
-+				u32 err1, err2;
-+				phase_seg1 = phase_seg2 % 2 ?
-+					phase_seg2-1 : phase_seg2;
-+				prop_seg = quanta-1 - phase_seg2 - phase_seg1;
-+				/*
-+				 * FIXME: support of longer lines
-+				 * (i.e. bigger prop_seg) is more prefered
-+				 * than support of cheap oscillators
-+				 * (i.e. bigger df/phase_seg1/phase_seg2)
-+				 * */
-+
-+				if (prop_seg < phase_seg1)
-+						continue;
-+				if (prop_seg > MAX_PROP_SEG)
-+						goto next_brp;
-+
-+				err1 = phase_seg1 * brp * 500 * 1000 /
-+					(13 * brp_expected - phase_seg2 *
-+					 brp * 1000);
-+				err2 = sjw * brp * 50 * 1000 / brp_expected;
-+
-+				df = min(err1, err2);
-+				if (df >= best_df) {
-+					unsigned error = abs(brp_expected * 10 /
-+							(brp * (1 + prop_seg +
-+								phase_seg1 +
-+								phase_seg2)) - 10000);
-+
-+					if (error > 10 || error > best_error)
-+						continue;
-+
-+					if (error == best_error && prop_seg <
-+							bit_time->prop_seg)
-+						continue;
-+
-+					best_error = error;
-+					best_df = df;
-+					bit_time->brp = brp;
-+					bit_time->prop_seg = prop_seg;
-+					bit_time->phase_seg1 = phase_seg1;
-+					bit_time->phase_seg2 = phase_seg2;
-+					bit_time->sjw = sjw;
-+					bit_time->sam =
-+						(bit_time->phase_seg1 > 3);
-+				}
-+			}
-+		}
-+next_brp:	;
-+	}
-+
-+	if (best_error < 0)
-+		return -EDOM;
-+	return 0;
-+}
-+EXPORT_SYMBOL(can_calc_bit_time);
-+
-+static int can_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+	struct can_priv *can = netdev_priv(dev);
-+	struct can_bittime *bt = (struct can_bittime *)&ifr->ifr_ifru;
-+	ulong *baudrate = (ulong *)&ifr->ifr_ifru;
-+	int ret = -EOPNOTSUPP;
-+
-+	dev_dbg(ND2D(dev), "(%s) 0x%08x %p\n", __func__, cmd, &ifr->ifr_ifru);
-+
-+	switch (cmd) {
-+	case SIOCSCANBAUDRATE:
-+		if (can->do_set_bit_time) {
-+			struct can_bittime bit_time;
-+			ret = can_calc_bit_time(can, *baudrate, &bit_time.std);
-+			if (ret != 0)
-+				break;
-+			bit_time.type = CAN_BITTIME_STD;
-+			ret = can->do_set_bit_time(dev, &bit_time);
-+			if (!ret) {
-+				can->baudrate = *baudrate;
-+				can->bit_time = bit_time;
-+			}
-+		}
-+		break;
-+	case SIOCGCANBAUDRATE:
-+		*baudrate = can->baudrate;
-+		ret = 0;
-+		break;
-+	case SIOCSCANCUSTOMBITTIME:
-+		if (can->do_set_bit_time) {
-+			ret = can->do_set_bit_time(dev, bt);
-+			if (!ret) {
-+				can->bit_time = *bt;
-+				if (bt->type == CAN_BITTIME_STD && bt->std.brp) {
-+					can->baudrate = can->can_sys_clock /
-+						(bt->std.brp * (1 + bt->std.prop_seg +
-+								bt->std.phase_seg1 +
-+								bt->std.phase_seg2));
-+				} else
-+					can->baudrate = CAN_BAUDRATE_UNKNOWN;
-+			}
-+		}
-+		break;
-+	case SIOCGCANCUSTOMBITTIME:
-+		*bt = can->bit_time;
-+		ret = 0;
-+		break;
-+	case SIOCSCANMODE:
-+		if (can->do_set_mode) {
-+			can_mode_t mode =
-+				*((can_mode_t *)(&ifr->ifr_ifru));
-+			if (mode == CAN_MODE_START &&
-+			    can->baudrate == CAN_BAUDRATE_UNCONFIGURED) {
-+				dev_info(ND2D(dev), "Impossible to start \
-+						on UNKNOWN speed\n");
-+				ret = EINVAL;
-+			} else
-+				return can->do_set_mode(dev, mode);
-+		}
-+		break;
-+	case SIOCGCANMODE:
-+		*((can_mode_t *)(&ifr->ifr_ifru)) = can->mode;
-+		ret = 0;
-+		break;
-+	case SIOCSCANCTRLMODE:
-+		if (can->do_set_ctrlmode) {
-+			can_ctrlmode_t ctrlmode =
-+				*((can_ctrlmode_t *)(&ifr->ifr_ifru));
-+			return can->do_set_ctrlmode(dev, ctrlmode);
-+		}
-+		break;
-+	case SIOCGCANCTRLMODE:
-+		*((can_ctrlmode_t *)(&ifr->ifr_ifru)) = can->ctrlmode;
-+		ret = 0;
-+		break;
-+	case SIOCSCANFILTER:
-+		break;
-+	case SIOCGCANFILTER:
-+		break;
-+	case SIOCGCANSTATE:
-+		if (can->do_get_state)
-+			return can->do_get_state(dev,
-+					(can_state_t *)(&ifr->ifr_ifru));
-+		break;
-+	case SIOCGCANSTATS:
-+		*((struct can_device_stats *)(&ifr->ifr_ifru)) = can->can_stats;
-+		ret = 0;
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
-+static void can_setup(struct net_device *dev)
-+{
-+	dev->type            = ARPHRD_CAN;
-+	dev->mtu             = sizeof(struct can_frame);
-+	dev->do_ioctl        = can_ioctl;
-+	dev->hard_header_len = 0;
-+	dev->addr_len        = 0;
-+	dev->tx_queue_len    = 10;
-+
-+	/* New-style flags. */
-+	dev->flags           = IFF_NOARP;
-+	dev->features        = NETIF_F_NO_CSUM;
-+}
-+
-+/*
-+ * Function  alloc_candev
-+ * 	Allocates and sets up an CAN device
-+ */
-+struct net_device *alloc_candev(int sizeof_priv)
-+{
-+	struct net_device *dev;
-+	struct can_priv *priv;
-+
-+	dev = alloc_netdev(sizeof_priv, "can%d", can_setup);
-+	if (!dev)
-+		return NULL;
-+
-+	priv = netdev_priv(dev);
-+
-+	priv->baudrate = CAN_BAUDRATE_UNCONFIGURED;
-+	priv->max_brp  = DEFAULT_MAX_BRP;
-+	priv->max_sjw  = DEFAULT_MAX_SJW;
-+	spin_lock_init(&priv->irq_lock);
-+
-+	return dev;
-+}
-+EXPORT_SYMBOL(alloc_candev);
-+
-+void free_candev(struct net_device *dev)
-+{
-+	free_netdev(dev);
-+}
-+EXPORT_SYMBOL(free_candev);
---- a/net/can/Makefile
-+++ b/net/can/Makefile
-@@ -10,3 +10,6 @@ can-raw-objs		:= raw.o
- 
- obj-$(CONFIG_CAN_BCM)	+= can-bcm.o
- can-bcm-objs		:= bcm.o
-+
-+obj-$(CONFIG_CAN)       += candev.o
-+candev-objs             := dev.o
---- a/net/irda/irlap.c
-+++ b/net/irda/irlap.c
-@@ -627,7 +627,7 @@ void irlap_status_indication(struct irla
- {
- 	switch (quality_of_link) {
- 	case STATUS_NO_ACTIVITY:
--		IRDA_MESSAGE("IrLAP, no activity on link!\n");
-+		/* IRDA_MESSAGE("IrLAP, no activity on link!\n"); */
- 		break;
- 	case STATUS_NOISY:
- 		IRDA_MESSAGE("IrLAP, noisy link!\n");
---- /dev/null
-+++ b/scripts/checkfiles
-@@ -0,0 +1,35 @@
-+#!/bin/sh
-+# (c) 2007, Erez Zadok <ezk@cs.sunysb.edu> (initial version)
-+# Licensed under the terms of the GNU GPL License version 2
-+#
-+# Check source files for compliance with coding standards, using terse
-+# output in the style that g/cc produces.  This output can be easily parsed
-+# within text editors (e.g., emacs/vim) which can produce a split text
-+# screen showing in one screen the error message, and in another screen the
-+# corresponding source file, with the cursor placed on the offending line.
-+# See for example the documentation for Emacs's "next-error" command, often
-+# bound to M-x ` (ESC x back-tick).
-+
-+# Usage: checkfiles file [files...]
-+#        if "file" is a directory, will check all *.[hc] files recursively
-+
-+# check usage
-+usage() {
-+	echo "Usage: checkfiles file [files...]"
-+	echo "(if \"file\" is a directory, check recursively for all C sources/headers)"
-+	exit 1
-+}
-+
-+# if test -z "$@" ; then
-+# 	usage
-+# fi
-+if ! test -f scripts/checkpatch.pl ; then
-+	echo "checkfiles: must run from top level source tree"
-+	exit 1
-+fi
-+
-+# check coding-style compliance of each source file found
-+find "$@" -type f -name '*.[hc]' | \
-+while read f ; do
-+	diff -u /dev/null $f | perl scripts/checkpatch.pl -
-+done
---- /dev/null
-+++ b/scripts/checkfilesterse
-@@ -0,0 +1,34 @@
-+#!/bin/sh
-+# (c) 2007, Erez Zadok <ezk@cs.sunysb.edu> (initial version)
-+# Licensed under the terms of the GNU GPL License version 2
-+#
-+# Check source files for compliance with coding standards, using terse
-+# output in the style that g/cc produces.  This output can be easily parsed
-+# within text editors (e.g., emacs/vim) which can produce a split text
-+# screen showing in one screen the error message, and in another screen the
-+# corresponding source file, with the cursor placed on the offending line.
-+# See for example the documentation for Emacs's "next-error" command, often
-+# bound to M-x ` (ESC x back-tick).
-+
-+# Usage: checkfiles file [files...]
-+#        if "file" is a directory, will check all *.[hc] files recursively
-+
-+# check usage
-+usage() {
-+	echo "Usage: checkfiles file [files...]"
-+	echo "(if \"file\" is a directory, check recursively for all C sources/headers)"
-+	exit 1
-+}
-+if test -z "" ; then
-+	usage
-+fi
-+if ! test -f scripts/checkpatch.pl ; then
-+	echo "checkfiles: must run from top level source tree"
-+	exit 1
-+fi
-+
-+# check coding-style compliance of each source file found, using terse output
-+find "$@" -type f -name '*.[hc]' | \
-+while read f ; do
-+	diff -u /dev/null $f | perl scripts/checkpatch.pl -t -
-+done
diff --git a/target/linux/coldfire/patches/001-mcfv4e_checkfiles_script.patch b/target/linux/coldfire/patches/001-mcfv4e_checkfiles_script.patch
new file mode 100644
index 0000000000..16b85368a4
--- /dev/null
+++ b/target/linux/coldfire/patches/001-mcfv4e_checkfiles_script.patch
@@ -0,0 +1,94 @@
+From d54d785a28afb65811c5d5ad727c57233deb6f60 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 31 Oct 2007 16:36:51 -0600
+Subject: [PATCH] Scripts to allow running files through checkpatch.pl
+
+Scripts based on scripts/checkfiles that are in various trees.
+
+These should not be sent up because there are already patches from
+the original script author.
+
+LTIBName: mcfv4e-checkfiles-script
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ scripts/checkfiles      |   35 +++++++++++++++++++++++++++++++++++
+ scripts/checkfilesterse |   34 ++++++++++++++++++++++++++++++++++
+ 2 files changed, 69 insertions(+), 0 deletions(-)
+ create mode 100755 scripts/checkfiles
+ create mode 100755 scripts/checkfilesterse
+
+--- /dev/null
++++ b/scripts/checkfiles
+@@ -0,0 +1,35 @@
++#!/bin/sh
++# (c) 2007, Erez Zadok <ezk@cs.sunysb.edu> (initial version)
++# Licensed under the terms of the GNU GPL License version 2
++#
++# Check source files for compliance with coding standards, using terse
++# output in the style that g/cc produces.  This output can be easily parsed
++# within text editors (e.g., emacs/vim) which can produce a split text
++# screen showing in one screen the error message, and in another screen the
++# corresponding source file, with the cursor placed on the offending line.
++# See for example the documentation for Emacs's "next-error" command, often
++# bound to M-x ` (ESC x back-tick).
++
++# Usage: checkfiles file [files...]
++#        if "file" is a directory, will check all *.[hc] files recursively
++
++# check usage
++usage() {
++	echo "Usage: checkfiles file [files...]"
++	echo "(if \"file\" is a directory, check recursively for all C sources/headers)"
++	exit 1
++}
++
++# if test -z "$@" ; then
++# 	usage
++# fi
++if ! test -f scripts/checkpatch.pl ; then
++	echo "checkfiles: must run from top level source tree"
++	exit 1
++fi
++
++# check coding-style compliance of each source file found
++find "$@" -type f -name '*.[hc]' | \
++while read f ; do
++	diff -u /dev/null $f | perl scripts/checkpatch.pl -
++done
+--- /dev/null
++++ b/scripts/checkfilesterse
+@@ -0,0 +1,34 @@
++#!/bin/sh
++# (c) 2007, Erez Zadok <ezk@cs.sunysb.edu> (initial version)
++# Licensed under the terms of the GNU GPL License version 2
++#
++# Check source files for compliance with coding standards, using terse
++# output in the style that g/cc produces.  This output can be easily parsed
++# within text editors (e.g., emacs/vim) which can produce a split text
++# screen showing in one screen the error message, and in another screen the
++# corresponding source file, with the cursor placed on the offending line.
++# See for example the documentation for Emacs's "next-error" command, often
++# bound to M-x ` (ESC x back-tick).
++
++# Usage: checkfiles file [files...]
++#        if "file" is a directory, will check all *.[hc] files recursively
++
++# check usage
++usage() {
++	echo "Usage: checkfiles file [files...]"
++	echo "(if \"file\" is a directory, check recursively for all C sources/headers)"
++	exit 1
++}
++if test -z "" ; then
++	usage
++fi
++if ! test -f scripts/checkpatch.pl ; then
++	echo "checkfiles: must run from top level source tree"
++	exit 1
++fi
++
++# check coding-style compliance of each source file found, using terse output
++find "$@" -type f -name '*.[hc]' | \
++while read f ; do
++	diff -u /dev/null $f | perl scripts/checkpatch.pl -t -
++done
diff --git a/target/linux/coldfire/patches/002-mcfv4e_coldfire_headers.patch b/target/linux/coldfire/patches/002-mcfv4e_coldfire_headers.patch
new file mode 100644
index 0000000000..a31b288175
--- /dev/null
+++ b/target/linux/coldfire/patches/002-mcfv4e_coldfire_headers.patch
@@ -0,0 +1,1646 @@
+From 127797e5cf8a036825007586b914b75897aba554 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 31 Oct 2007 16:39:31 -0600
+Subject: [PATCH] Add Coldfire Support into existing headers.
+
+Modifications to the various M68k header files to add
+Coldfire processor support.
+
+LTIBName: mcfv4e-coldfire-headers
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ include/asm-m68k/atomic.h      |   23 ++-
+ include/asm-m68k/bitops.h      |  426 ++++++++++++++++++++++++++++++++++++++++
+ include/asm-m68k/bootinfo.h    |   13 ++
+ include/asm-m68k/byteorder.h   |   12 +-
+ include/asm-m68k/cacheflush.h  |    4 +
+ include/asm-m68k/checksum.h    |   10 +
+ include/asm-m68k/delay.h       |   26 +++
+ include/asm-m68k/div64.h       |    4 +
+ include/asm-m68k/elf.h         |    2 +-
+ include/asm-m68k/fpu.h         |    2 +
+ include/asm-m68k/io.h          |   26 +++-
+ include/asm-m68k/irq.h         |    5 +-
+ include/asm-m68k/machdep.h     |    7 +
+ include/asm-m68k/mmu_context.h |   84 ++++++++-
+ include/asm-m68k/page.h        |   20 ++-
+ include/asm-m68k/page_offset.h |    7 +-
+ include/asm-m68k/pci.h         |   99 ++++++----
+ include/asm-m68k/pgalloc.h     |    4 +-
+ include/asm-m68k/pgtable.h     |   15 ++
+ include/asm-m68k/processor.h   |   46 ++++-
+ include/asm-m68k/ptrace.h      |   11 +
+ include/asm-m68k/raw_io.h      |   58 ++++++
+ include/asm-m68k/segment.h     |   10 +
+ include/asm-m68k/setup.h       |   27 +++
+ include/asm-m68k/signal.h      |    5 +
+ include/asm-m68k/string.h      |    2 +
+ include/asm-m68k/system.h      |   17 ++-
+ include/asm-m68k/thread_info.h |    1 +
+ include/asm-m68k/tlbflush.h    |   16 ++-
+ include/asm-m68k/uaccess.h     |    4 +
+ 30 files changed, 925 insertions(+), 61 deletions(-)
+
+--- a/include/asm-m68k/atomic.h
++++ b/include/asm-m68k/atomic.h
+@@ -2,7 +2,7 @@
+ #define __ARCH_M68K_ATOMIC__
+ 
+ 
+-#include <asm/system.h>
++#include <asm/system.h>	/* local_irq_XXX() */
+ 
+ /*
+  * Atomic operations that C can't guarantee us.  Useful for
+@@ -21,12 +21,20 @@ typedef struct { int counter; } atomic_t
+ 
+ static inline void atomic_add(int i, atomic_t *v)
+ {
++#ifndef CONFIG_COLDFIRE
+ 	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : "id" (i));
++#else
++	__asm__ __volatile__("addl %1,%0" : "=m" (*v) : "d" (i), "m" (*v));
++#endif
+ }
+ 
+ static inline void atomic_sub(int i, atomic_t *v)
+ {
++#ifndef CONFIG_COLDFIRE
+ 	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : "id" (i));
++#else
++	__asm__ __volatile__("subl %1,%0" : "=m" (*v) : "d" (i), "m" (*v));
++#endif
+ }
+ 
+ static inline void atomic_inc(atomic_t *v)
+@@ -46,6 +54,14 @@ static inline int atomic_dec_and_test(at
+ 	return c != 0;
+ }
+ 
++static __inline__ int atomic_dec_and_test_lt(volatile atomic_t *v)
++{
++	char c;
++	__asm__ __volatile__("subql #1,%1; slt %0" : "=d" (c), "=m" (*v)
++			     : "m" (*v));
++	return c != 0 ;
++}
++
+ static inline int atomic_inc_and_test(atomic_t *v)
+ {
+ 	char c;
+@@ -156,7 +172,12 @@ static inline int atomic_sub_and_test(in
+ static inline int atomic_add_negative(int i, atomic_t *v)
+ {
+ 	char c;
++#ifndef CONFIG_COLDFIRE
+ 	__asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "+m" (*v): "g" (i));
++#else
++	 __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "=m" (*v)
++			      : "d" (i) , "m" (*v));
++#endif
+ 	return c != 0;
+ }
+ 
+--- a/include/asm-m68k/bitops.h
++++ b/include/asm-m68k/bitops.h
+@@ -19,6 +19,7 @@
+  *
+  * They use the standard big-endian m680x0 bit ordering.
+  */
++#ifndef CONFIG_COLDFIRE
+ 
+ #define test_and_set_bit(nr,vaddr) \
+   (__builtin_constant_p(nr) ? \
+@@ -457,4 +458,429 @@ static inline int ext2_find_next_bit(con
+ 
+ #endif /* __KERNEL__ */
+ 
++#else /* CONFIG_COLDFIRE */
++
++#define test_and_set_bit(nr,vaddr)			\
++  (__builtin_constant_p(nr) ?				\
++   __constant_coldfire_test_and_set_bit(nr, vaddr) :	\
++   __generic_coldfire_test_and_set_bit(nr, vaddr))
++
++
++static __inline__ int __constant_coldfire_test_and_set_bit(int nr,
++	volatile void *vaddr)
++{
++	char retval;
++	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
++
++	__asm__ __volatile__ ("bset %2,%1; sne %0"
++	     : "=d" (retval), "+QUd" (*p)
++	     : "di" (nr & 7));
++	return retval;
++}
++
++static __inline__ int __generic_coldfire_test_and_set_bit(int nr,
++	volatile void *vaddr)
++{
++	char retval;
++
++	__asm__ __volatile__ ("bset %2,%1; sne %0"
++	     : "=d" (retval), "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
++	     : "d" (nr)
++	     : "memory");
++	return retval;
++}
++#define __test_and_set_bit(nr, vaddr) test_and_set_bit(nr, vaddr)
++
++#define set_bit(nr,vaddr)			\
++  (__builtin_constant_p(nr) ?			\
++   __constant_coldfire_set_bit(nr, vaddr) :	\
++   __generic_coldfire_set_bit(nr, vaddr))
++
++static __inline__ void __constant_coldfire_set_bit(int nr,
++	volatile void *vaddr)
++{
++	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
++	__asm__ __volatile__ ("bset %1,%0"
++	     : "+QUd" (*p) : "di" (nr & 7));
++}
++
++static __inline__ void __generic_coldfire_set_bit(int nr, volatile void *vaddr)
++{
++	__asm__ __volatile__ ("bset %1,%0"
++	     : "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
++	     : "d" (nr)
++	     : "memory");
++}
++#define __set_bit(nr, vaddr) set_bit(nr, vaddr)
++
++#define test_and_clear_bit(nr, vaddr)			\
++  (__builtin_constant_p(nr) ?				\
++   __constant_coldfire_test_and_clear_bit(nr, vaddr) :	\
++   __generic_coldfire_test_and_clear_bit(nr, vaddr))
++
++static __inline__ int __constant_coldfire_test_and_clear_bit(int nr,
++	volatile void *vaddr)
++{
++	char retval;
++	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
++
++	__asm__ __volatile__ ("bclr %2,%1; sne %0"
++	     : "=d" (retval), "+QUd" (*p)
++	     : "id" (nr & 7));
++
++	return retval;
++}
++
++static __inline__ int __generic_coldfire_test_and_clear_bit(int nr,
++	volatile void *vaddr)
++{
++	char retval;
++
++	__asm__ __volatile__ ("bclr %2,%1; sne %0"
++	     : "=d" (retval), "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
++	     : "d" (nr & 7)
++	     : "memory");
++
++	return retval;
++}
++#define __test_and_clear_bit(nr, vaddr) test_and_clear_bit(nr, vaddr)
++
++/*
++ * clear_bit() doesn't provide any barrier for the compiler.
++ */
++#define smp_mb__before_clear_bit()	barrier()
++#define smp_mb__after_clear_bit()	barrier()
++
++#define clear_bit(nr,vaddr)			\
++  (__builtin_constant_p(nr) ?			\
++   __constant_coldfire_clear_bit(nr, vaddr) :	\
++   __generic_coldfire_clear_bit(nr, vaddr))
++
++static __inline__ void __constant_coldfire_clear_bit(int nr,
++	volatile void *vaddr)
++{
++	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
++	__asm__ __volatile__ ("bclr %1,%0"
++	     : "+QUd" (*p) : "id" (nr & 7));
++}
++
++static __inline__ void __generic_coldfire_clear_bit(int nr,
++	volatile void *vaddr)
++{
++	__asm__ __volatile__ ("bclr %1,%0"
++	     : "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
++	     : "d" (nr)
++	     : "memory");
++}
++#define __clear_bit(nr, vaddr) clear_bit(nr, vaddr)
++
++#define test_and_change_bit(nr, vaddr)			\
++  (__builtin_constant_p(nr) ?				\
++   __constant_coldfire_test_and_change_bit(nr, vaddr) :	\
++   __generic_coldfire_test_and_change_bit(nr, vaddr))
++
++static __inline__ int __constant_coldfire_test_and_change_bit(int nr,
++	volatile void *vaddr)
++{
++	char retval;
++	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
++
++	__asm__ __volatile__ ("bchg %2,%1; sne %0"
++	     : "=d" (retval), "+QUd" (*p)
++	     : "id" (nr & 7));
++
++	return retval;
++}
++
++static __inline__ int __generic_coldfire_test_and_change_bit(int nr,
++	volatile void *vaddr)
++{
++	char retval;
++
++	__asm__ __volatile__ ("bchg %2,%1; sne %0"
++	     : "=d" (retval), "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
++	     : "id" (nr)
++	     : "memory");
++
++	return retval;
++}
++#define __test_and_change_bit(nr, vaddr) test_and_change_bit(nr, vaddr)
++#define __change_bit(nr, vaddr) change_bit(nr, vaddr)
++
++#define change_bit(nr,vaddr)			\
++  (__builtin_constant_p(nr) ?			\
++   __constant_coldfire_change_bit(nr, vaddr) :	\
++   __generic_coldfire_change_bit(nr, vaddr))
++
++static __inline__ void __constant_coldfire_change_bit(int nr,
++	volatile void *vaddr)
++{
++	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
++	__asm__ __volatile__ ("bchg %1,%0"
++	     : "+QUd" (*p) : "id" (nr & 7));
++}
++
++static __inline__ void __generic_coldfire_change_bit(int nr,
++	volatile void *vaddr)
++{
++	__asm__ __volatile__ ("bchg %1,%0"
++	     : "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
++	     : "d" (nr)
++	     : "memory");
++}
++
++static inline int test_bit(int nr, const unsigned long *vaddr)
++{
++	return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0;
++}
++
++static __inline__ unsigned long ffz(unsigned long word)
++{
++	unsigned long result = 0;
++
++	while (word & 1) {
++		result++;
++		word >>= 1;
++	}
++	return result;
++}
++
++/* find_next_zero_bit() finds the first zero bit in a bit string of length
++ * 'size' bits, starting the search at bit 'offset'.  This is largely based
++ * on Linus's ALPHA routines.
++ */
++static __inline__ unsigned long find_next_zero_bit(void *addr,
++	unsigned long size, unsigned long offset)
++{
++	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
++	unsigned long result = offset & ~31UL;
++	unsigned long tmp;
++
++	if (offset >= size)
++		return size;
++	size -= result;
++	offset &= 31UL;
++	if (offset) {
++		tmp = *(p++);
++		tmp |= ~0UL >> (32-offset);
++		if (size < 32)
++			goto found_first;
++		if (~tmp)
++			goto found_middle;
++		size -= 32;
++		result += 32;
++	}
++	while (size & ~31UL) {
++		tmp = *(p++);
++		if (~tmp)
++			goto found_middle;
++		result += 32;
++		size -= 32;
++	}
++	if (!size)
++		return result;
++	tmp = *p;
++
++found_first:
++	tmp |= ~0UL >> size;
++found_middle:
++	return result + ffz(tmp);
++}
++
++#define find_first_zero_bit(addr, size) find_next_zero_bit(((void *)addr), \
++		(size), 0)
++
++/* Ported from included/linux/bitops.h  */
++static __inline__ int ffs(int x)
++{
++	int r = 1;
++
++	if (!x)
++		return 0;
++	if (!(x & 0xffff)) {
++		x >>= 16;
++		r += 16;
++	}
++	if (!(x & 0xff)) {
++		x >>= 8;
++		r += 8;
++	}
++	if (!(x & 0xf)) {
++		x >>= 4;
++		r += 4;
++	}
++	if (!(x & 3)) {
++		x >>= 2;
++		r += 2;
++	}
++	if (!(x & 1)) {
++		x >>= 1;
++		r += 1;
++	}
++	return r;
++}
++#define __ffs(x) (ffs(x) - 1)
++
++/* find_next_bit - find the next set bit in a memory region
++ * (from asm-ppc/bitops.h)
++ */
++static __inline__ unsigned long find_next_bit(const unsigned long *addr,
++	unsigned long size, unsigned long offset)
++{
++	unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
++	unsigned int result = offset & ~31UL;
++	unsigned int tmp;
++
++	if (offset >= size)
++		return size;
++	size -= result;
++	offset &= 31UL;
++	if (offset) {
++		tmp = *p++;
++		tmp &= ~0UL << offset;
++		if (size < 32)
++			goto found_first;
++		if (tmp)
++			goto found_middle;
++		size -= 32;
++		result += 32;
++	}
++	while (size >= 32) {
++		tmp = *p++;
++		if (tmp != 0)
++			goto found_middle;
++		result += 32;
++		size -= 32;
++	}
++	if (!size)
++		return result;
++	tmp = *p;
++
++found_first:
++	tmp &= ~0UL >> (32 - size);
++	if (tmp == 0UL)        /* Are any bits set? */
++		return result + size; /* Nope. */
++found_middle:
++	return result + __ffs(tmp);
++}
++
++#define find_first_bit(addr, size) find_next_bit((addr), (size), 0)
++
++#ifdef __KERNEL__
++
++/* Ported from include/linux/bitops.h */
++static  __inline__ int fls(int x)
++{
++	int r = 32;
++
++	if (!x)
++		return 0;
++	if (!(x & 0xffff0000u)) {
++		x <<= 16;
++		r -= 16;
++	}
++	if (!(x & 0xff000000u)) {
++		x <<= 8;
++		r -= 8;
++	}
++	if (!(x & 0xf0000000u)) {
++		x <<= 4;
++		r -= 4;
++	}
++	if (!(x & 0xc0000000u)) {
++		x <<= 2;
++		r -= 2;
++	}
++	if (!(x & 0x80000000u)) {
++		x <<= 1;
++		r -= 1;
++	}
++	return r;
++}
++
++#include <asm-generic/bitops/fls64.h>
++#include <asm-generic/bitops/sched.h>
++#include <asm-generic/bitops/hweight.h>
++
++#define minix_find_first_zero_bit(addr, size)	find_next_zero_bit((addr), \
++							(size), 0)
++#define minix_test_and_set_bit(nr, addr)	test_and_set_bit((nr), \
++							(unsigned long *)(addr))
++#define minix_set_bit(nr, addr)			set_bit((nr), \
++							(unsigned long *)(addr))
++#define minix_test_and_clear_bit(nr, addr)	test_and_clear_bit((nr), \
++							(unsigned long *)(addr))
++
++static inline int minix_test_bit(int nr, const volatile unsigned long *vaddr)
++{
++	int 	*a = (int *)vaddr;
++	int	mask;
++
++	a += nr >> 5;
++	mask = 1 << (nr & 0x1f);
++	return ((mask & *a) != 0);
++}
++
++#define ext2_set_bit(nr, addr)			test_and_set_bit((nr) ^ 24, \
++							(unsigned long *)(addr))
++#define ext2_set_bit_atomic(lock, nr, addr)	test_and_set_bit((nr) ^ 24, \
++							(unsigned long *)(addr))
++#define ext2_clear_bit(nr, addr)		test_and_clear_bit((nr) ^ 24, \
++							(unsigned long *)(addr))
++#define ext2_clear_bit_atomic(lock, nr, addr)	test_and_clear_bit((nr) ^ 24, \
++							(unsigned long *)(addr))
++
++static inline int ext2_test_bit(int nr, const void *vaddr)
++{
++	const unsigned char *p = vaddr;
++	return (p[nr >> 3] & (1U << (nr & 7))) != 0;
++}
++
++static inline int ext2_find_first_zero_bit(const void *vaddr, unsigned size)
++{
++	const unsigned long *p = vaddr, *addr = vaddr;
++	int res;
++
++	if (!size)
++		return 0;
++
++	size = (size >> 5) + ((size & 31) > 0);
++	while (*p++ == ~0UL) {
++		if (--size == 0)
++			return (p - addr) << 5;
++	}
++
++	--p;
++	for (res = 0; res < 32; res++)
++		if (!ext2_test_bit (res, p))
++			break;
++	return (p - addr) * 32 + res;
++}
++
++static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size,
++					  unsigned offset)
++{
++	const unsigned long *addr = vaddr;
++	const unsigned long *p = addr + (offset >> 5);
++	int bit = offset & 31UL, res;
++
++	if (offset >= size)
++		return size;
++
++	if (bit) {
++		/* Look for zero in first longword */
++		for (res = bit; res < 32; res++)
++			if (!ext2_test_bit (res, p))
++				return (p - addr) * 32 + res;
++		p++;
++	}
++	/* No zero yet, search remaining full bytes for a zero */
++	res = ext2_find_first_zero_bit(p, size - 32 * (p - addr));
++	return (p - addr) * 32 + res;
++}
++
++#endif /* KERNEL */
++
++#endif /* CONFIG_COLDFIRE */
++
+ #endif /* _M68K_BITOPS_H */
+--- a/include/asm-m68k/bootinfo.h
++++ b/include/asm-m68k/bootinfo.h
+@@ -49,6 +49,19 @@ struct bi_record {
+ #endif /* __ASSEMBLY__ */
+ 
+ 
++#ifndef __ASSEMBLY__
++
++struct uboot_record {
++    unsigned long bd_info;
++    unsigned long initrd_start;
++    unsigned long initrd_end;
++    unsigned long cmd_line_start;
++    unsigned long cmd_line_stop;
++};
++
++#endif /* __ASSEMBLY__ */
++
++
+     /*
+      *  Tag Definitions
+      *
+--- a/include/asm-m68k/byteorder.h
++++ b/include/asm-m68k/byteorder.h
+@@ -4,8 +4,15 @@
+ #include <asm/types.h>
+ #include <linux/compiler.h>
+ 
+-#ifdef __GNUC__
+-
++#if defined(__GNUC__)
++#if defined(__mcfisaaplus__) || defined(__mcfisac__)
++static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 val)
++{
++	__asm__ ("byterev %0" : "=d" (val) : "0" (val));
++	return val;
++}
++#define __arch__swab32(x) ___arch__swab32(x)
++#elif !defined(__mcoldfire__)
+ static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 val)
+ {
+ 	__asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val));
+@@ -14,6 +21,7 @@ static __inline__ __attribute_const__ __
+ #define __arch__swab32(x) ___arch__swab32(x)
+ 
+ #endif
++#endif
+ 
+ #if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+ #  define __BYTEORDER_HAS_U64__
+--- a/include/asm-m68k/cacheflush.h
++++ b/include/asm-m68k/cacheflush.h
+@@ -6,6 +6,9 @@
+ /* cache code */
+ #define FLUSH_I_AND_D	(0x00000808)
+ #define FLUSH_I		(0x00000008)
++#ifdef CONFIG_COLDFIRE
++#include <asm/cf_cacheflush.h>
++#else /* !CONFIG_COLDFIRE */
+ 
+ /*
+  * Cache handling functions
+@@ -153,4 +156,5 @@ static inline void copy_from_user_page(s
+ 	memcpy(dst, src, len);
+ }
+ 
++#endif /* !CONFIG_COLDFIRE */
+ #endif /* _M68K_CACHEFLUSH_H */
+--- a/include/asm-m68k/checksum.h
++++ b/include/asm-m68k/checksum.h
+@@ -34,6 +34,7 @@ extern __wsum csum_partial_copy_nocheck(
+ 					      void *dst, int len,
+ 					      __wsum sum);
+ 
++#ifndef CONFIG_COLDFIRE  /* CF has own copy in arch/m68k/lib/checksum.c */
+ /*
+  *	This is a version of ip_compute_csum() optimized for IP headers,
+  *	which always checksum on 4 octet boundaries.
+@@ -59,6 +60,9 @@ static inline __sum16 ip_fast_csum(const
+ 		 : "memory");
+ 	return (__force __sum16)~sum;
+ }
++#else
++extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
++#endif
+ 
+ /*
+  *	Fold a partial checksum
+@@ -67,6 +71,11 @@ static inline __sum16 ip_fast_csum(const
+ static inline __sum16 csum_fold(__wsum sum)
+ {
+ 	unsigned int tmp = (__force u32)sum;
++#ifdef CONFIG_COLDFIRE
++	tmp = (tmp & 0xffff) + (tmp >> 16);
++	tmp = (tmp & 0xffff) + (tmp >> 16);
++	return (__force __sum16) ~tmp;
++#else
+ 	__asm__("swap %1\n\t"
+ 		"addw %1, %0\n\t"
+ 		"clrw %1\n\t"
+@@ -74,6 +83,7 @@ static inline __sum16 csum_fold(__wsum s
+ 		: "=&d" (sum), "=&d" (tmp)
+ 		: "0" (sum), "1" (tmp));
+ 	return (__force __sum16)~sum;
++#endif
+ }
+ 
+ 
+--- a/include/asm-m68k/delay.h
++++ b/include/asm-m68k/delay.h
+@@ -11,8 +11,25 @@
+ 
+ static inline void __delay(unsigned long loops)
+ {
++#if defined(CONFIG_COLDFIRE)
++	/* The coldfire runs this loop at significantly different speeds
++	 * depending upon long word alignment or not.  We'll pad it to
++	 * long word alignment which is the faster version.
++	 * The 0x4a8e is of course a 'tstl %fp' instruction.  This is better
++	 * than using a NOP (0x4e71) instruction because it executes in one
++	 * cycle not three and doesn't allow for an arbitary delay waiting
++	 * for bus cycles to finish.  Also fp/a6 isn't likely to cause a
++	 * stall waiting for the register to become valid if such is added
++	 * to the coldfire at some stage.
++	 */
++	__asm__ __volatile__ (".balignw 4, 0x4a8e\n\t"
++			      "1: subql #1, %0\n\t"
++			      "jcc 1b"
++			      : "=d" (loops) : "0" (loops));
++#else
+ 	__asm__ __volatile__ ("1: subql #1,%0; jcc 1b"
+ 		: "=d" (loops) : "0" (loops));
++#endif
+ }
+ 
+ extern void __bad_udelay(void);
+@@ -26,12 +43,17 @@ extern void __bad_udelay(void);
+  */
+ static inline void __const_udelay(unsigned long xloops)
+ {
++#if defined(CONFIG_COLDFIRE)
++
++	__delay(((((unsigned long long) xloops * loops_per_jiffy))>>32)*HZ);
++#else
+ 	unsigned long tmp;
+ 
+ 	__asm__ ("mulul %2,%0:%1"
+ 		: "=d" (xloops), "=d" (tmp)
+ 		: "d" (xloops), "1" (loops_per_jiffy));
+ 	__delay(xloops * HZ);
++#endif
+ }
+ 
+ static inline void __udelay(unsigned long usecs)
+@@ -46,12 +68,16 @@ static inline void __udelay(unsigned lon
+ static inline unsigned long muldiv(unsigned long a, unsigned long b,
+ 				   unsigned long c)
+ {
++#if defined(CONFIG_COLDFIRE)
++	return (long)(((unsigned long long)a * b)/c);
++#else
+ 	unsigned long tmp;
+ 
+ 	__asm__ ("mulul %2,%0:%1; divul %3,%0:%1"
+ 		: "=d" (tmp), "=d" (a)
+ 		: "d" (b), "d" (c), "1" (a));
+ 	return a;
++#endif
+ }
+ 
+ #endif /* defined(_M68K_DELAY_H) */
+--- a/include/asm-m68k/div64.h
++++ b/include/asm-m68k/div64.h
+@@ -5,6 +5,7 @@
+ 
+ /* n = n / base; return rem; */
+ 
++#ifndef CONFIG_COLDFIRE
+ #define do_div(n, base) ({					\
+ 	union {							\
+ 		unsigned long n32[2];				\
+@@ -24,6 +25,9 @@
+ 	(n) = __n.n64;						\
+ 	__rem;							\
+ })
++#else
++#  include <asm-generic/div64.h>
++#endif
+ 
+ extern uint64_t div64_64(uint64_t dividend, uint64_t divisor);
+ #endif /* _M68K_DIV64_H */
+--- a/include/asm-m68k/elf.h
++++ b/include/asm-m68k/elf.h
+@@ -60,7 +60,7 @@ typedef struct user_m68kfp_struct elf_fp
+ #define ELF_PLAT_INIT(_r, load_addr)	_r->a1 = 0
+ 
+ #define USE_ELF_CORE_DUMP
+-#ifndef CONFIG_SUN3
++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
+ #define ELF_EXEC_PAGESIZE	4096
+ #else
+ #define ELF_EXEC_PAGESIZE	8192
+--- a/include/asm-m68k/fpu.h
++++ b/include/asm-m68k/fpu.h
+@@ -12,6 +12,8 @@
+ #define FPSTATESIZE (96/sizeof(unsigned char))
+ #elif defined(CONFIG_M68KFPU_EMU)
+ #define FPSTATESIZE (28/sizeof(unsigned char))
++#elif defined(CONFIG_CFV4E)
++#define FPSTATESIZE (16/sizeof(unsigned char))
+ #elif defined(CONFIG_M68060)
+ #define FPSTATESIZE (12/sizeof(unsigned char))
+ #else
+--- a/include/asm-m68k/io.h
++++ b/include/asm-m68k/io.h
+@@ -397,10 +397,12 @@ static inline void memcpy_toio(volatile 
+ 	__builtin_memcpy((void __force *) dst, src, count);
+ }
+ 
+-#ifndef CONFIG_SUN3
+-#define IO_SPACE_LIMIT 0xffff
+-#else
++#if defined(CONFIG_SUN3)
+ #define IO_SPACE_LIMIT 0x0fffffff
++#elif defined(CONFIG_COLDFIRE)
++#define IO_SPACE_LIMIT 0xffffffff
++#else
++#define IO_SPACE_LIMIT 0xffff
+ #endif
+ 
+ #endif /* __KERNEL__ */
+@@ -418,4 +420,22 @@ static inline void memcpy_toio(volatile 
+  */
+ #define xlate_dev_kmem_ptr(p)	p
+ 
++#ifdef CONFIG_COLDFIRE
++
++#define memset_io(a, b, c) memset((void *)(a), (b), (c))
++#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
++#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
++#if !defined(readb)
++#define readb(addr) \
++    ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
++#define readw(addr) \
++    ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
++#define readl(addr) \
++    ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
++#define writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b))
++#define writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b))
++#define writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
++#endif /* readb */
++#endif /* CONFIG_COLDFIRE */
++
+ #endif /* _IO_H */
+--- a/include/asm-m68k/irq.h
++++ b/include/asm-m68k/irq.h
+@@ -11,7 +11,10 @@
+  * Currently the Atari has 72 and the Amiga 24, but if both are
+  * supported in the kernel it is better to make room for 72.
+  */
+-#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
++#if defined(CONFIG_COLDFIRE)
++#define SYS_IRQS 256
++#define NR_IRQS SYS_IRQS
++#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
+ #define NR_IRQS 200
+ #elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
+ #define NR_IRQS 72
+--- a/include/asm-m68k/machdep.h
++++ b/include/asm-m68k/machdep.h
+@@ -32,4 +32,11 @@ extern void (*mach_heartbeat) (int);
+ extern void (*mach_l2_flush) (int);
+ extern void (*mach_beep) (unsigned int, unsigned int);
+ 
++#ifdef CONFIG_COLDFIRE
++extern void __init config_coldfire(void);
++extern void __init mmu_context_init(void);
++extern irq_handler_t mach_default_handler;
++extern void (*mach_tick)(void);
++#endif
++
+ #endif /* _M68K_MACHDEP_H */
+--- a/include/asm-m68k/mmu_context.h
++++ b/include/asm-m68k/mmu_context.h
+@@ -7,7 +7,7 @@ static inline void enter_lazy_tlb(struct
+ {
+ }
+ 
+-#ifndef CONFIG_SUN3
++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
+ 
+ #include <asm/setup.h>
+ #include <asm/page.h>
+@@ -102,7 +102,7 @@ static inline void activate_mm(struct mm
+ 		switch_mm_0460(next_mm);
+ }
+ 
+-#else  /* CONFIG_SUN3 */
++#elif defined(CONFIG_SUN3)
+ #include <asm/sun3mmu.h>
+ #include <linux/sched.h>
+ 
+@@ -150,5 +150,83 @@ static inline void activate_mm(struct mm
+ 	activate_context(next_mm);
+ }
+ 
+-#endif
++#else /* CONFIG_COLDFIRE */
++
++#include <asm/atomic.h>
++#include <asm/bitops.h>
++#include <asm/mmu.h>
++
++#define NO_CONTEXT		256
++#define LAST_CONTEXT		255
++#define FIRST_CONTEXT		1
++
++extern void set_context(mm_context_t context, pgd_t *pgd);
++extern unsigned long context_map[];
++extern mm_context_t next_mmu_context;
++
++extern atomic_t nr_free_contexts;
++extern struct mm_struct *context_mm[LAST_CONTEXT+1];
++extern void steal_context(void);
++
++static inline void get_mmu_context(struct mm_struct *mm)
++{
++	mm_context_t ctx;
++
++	if (mm->context != NO_CONTEXT)
++		return;
++	while (atomic_dec_and_test_lt(&nr_free_contexts)) {
++		atomic_inc(&nr_free_contexts);
++		steal_context();
++	}
++	ctx = next_mmu_context;
++	while (test_and_set_bit(ctx, context_map)) {
++		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
++		if (ctx > LAST_CONTEXT)
++			ctx = 0;
++	}
++	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
++	mm->context = ctx;
++	context_mm[ctx] = mm;
++}
++
++/*
++ * Set up the context for a new address space.
++ */
++#define init_new_context(tsk, mm)	(((mm)->context = NO_CONTEXT), 0)
++
++/*
++ * We're finished using the context for an address space.
++ */
++static inline void destroy_context(struct mm_struct *mm)
++{
++	if (mm->context != NO_CONTEXT) {
++		clear_bit(mm->context, context_map);
++		mm->context = NO_CONTEXT;
++		atomic_inc(&nr_free_contexts);
++	}
++}
++
++static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
++	struct task_struct *tsk)
++{
++	get_mmu_context(tsk->mm);
++	set_context(tsk->mm->context, next->pgd);
++}
++
++/*
++ * After we have set current->mm to a new value, this activates
++ * the context for the new mm so we see the new mappings.
++ */
++static inline void activate_mm(struct mm_struct *active_mm,
++	struct mm_struct *mm)
++{
++	get_mmu_context(mm);
++	set_context(mm->context, mm->pgd);
++}
++
++#define deactivate_mm(tsk, mm) do { } while (0)
++
++extern void mmu_context_init(void);
++
++#endif /* CONFIG_COLDFIRE */
+ #endif
+--- a/include/asm-m68k/page.h
++++ b/include/asm-m68k/page.h
+@@ -4,7 +4,7 @@
+ #include <linux/const.h>
+ 
+ /* PAGE_SHIFT determines the page size */
+-#ifndef CONFIG_SUN3
++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
+ #define PAGE_SHIFT	(12)
+ #else
+ #define PAGE_SHIFT	(13)
+@@ -116,10 +116,23 @@ typedef struct page *pgtable_t;
+ 
+ extern unsigned long m68k_memoffset;
+ 
+-#ifndef CONFIG_SUN3
++#if !defined(CONFIG_SUN3)
+ 
+ #define WANT_PAGE_VIRTUAL
+ 
++#if defined(CONFIG_COLDFIRE)
++static inline unsigned long ___pa(void *vaddr)
++{
++	return (((unsigned long)vaddr & 0x0fffffff) + CONFIG_SDRAM_BASE);
++}
++#define __pa(vaddr)	___pa((void *)(vaddr))
++
++static inline void *__va(unsigned long paddr)
++{
++	return (void *)((paddr & 0x0fffffff) + PAGE_OFFSET);
++}
++
++#else
+ static inline unsigned long ___pa(void *vaddr)
+ {
+ 	unsigned long paddr;
+@@ -141,6 +154,7 @@ static inline void *__va(unsigned long p
+ 		: "0" (paddr), "i" (m68k_fixup_memoffset));
+ 	return vaddr;
+ }
++#endif
+ 
+ #else	/* !CONFIG_SUN3 */
+ /* This #define is a horrible hack to suppress lots of warnings. --m */
+@@ -172,6 +186,8 @@ static inline void *__va(unsigned long x
+  * memory node, but we have no highmem, so that works for now.
+  * TODO: implement (fast) pfn<->pgdat_idx conversion functions, this makes lots
+  * of the shifts unnecessary.
++ *
++ * PFNs are used to map physical pages.  So PFN[0] maps to the base phys addr.
+  */
+ #define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
+ #define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
+--- a/include/asm-m68k/page_offset.h
++++ b/include/asm-m68k/page_offset.h
+@@ -1,8 +1,11 @@
+ 
+ /* This handles the memory map.. */
+-#ifndef CONFIG_SUN3
++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
+ #define PAGE_OFFSET_RAW		0x00000000
+-#else
++#elif defined(CONFIG_SUN3)
+ #define PAGE_OFFSET_RAW		0x0E000000
++#else /* CONFIG_COLDFIRE */
++#define PAGE_OFFSET_RAW		0xC0000000
++#define	PHYS_OFFSET		0x40000000
+ #endif
+ 
+--- a/include/asm-m68k/pci.h
++++ b/include/asm-m68k/pci.h
+@@ -1,57 +1,86 @@
+-#ifndef _ASM_M68K_PCI_H
+-#define _ASM_M68K_PCI_H
+-
+ /*
+- * asm-m68k/pci_m68k.h - m68k specific PCI declarations.
++ * asm-m68k/pci.h - m68k specific PCI declarations.
+  *
+- * Written by Wout Klaren.
++ * Coldfire Implementation Copyright (c) 2007 Freescale Semiconductor, Inc.
++ *	Kurt Mahan <kmahan@freescale.com>
+  */
++#ifndef _ASM_M68K_PCI_H
++#define _ASM_M68K_PCI_H
+ 
+-#include <asm/scatterlist.h>
++#ifdef CONFIG_PCI
+ 
+-struct pci_ops;
++#include <asm-generic/pci-dma-compat.h>
+ 
+ /*
+- * Structure with hardware dependent information and functions of the
+- * PCI bus.
++ * The PCI address space does equal the physical memory
++ * address space.  The networking and block device layers use
++ * this boolean for bounce buffer decisions.
+  */
++#define PCI_DMA_BUS_IS_PHYS		(1)
+ 
+-struct pci_bus_info
+-{
+-	/*
+-	 * Resources of the PCI bus.
+-	 */
+-
+-	struct resource mem_space;
+-	struct resource io_space;
++#define PCIBIOS_MIN_IO			0x00004000
++#define PCIBIOS_MIN_MEM			0x02000000
+ 
+-	/*
+-	 * System dependent functions.
+-	 */
++#define pcibios_assign_all_busses()	0
++#define pcibios_scan_all_fns(a, b)	0
+ 
+-	struct pci_ops *m68k_pci_ops;
++static inline void
++pcibios_set_master(struct pci_dev *dev)
++{
++	/* no special bus mastering setup handling */
++}
+ 
+-	void (*fixup)(int pci_modify);
+-	void (*conf_device)(struct pci_dev *dev);
+-};
++static inline void
++pcibios_penalize_isa_irq(int irq, int active)
++{
++	/* no dynamic PCI IRQ allocation */
++}
+ 
+-#define pcibios_assign_all_busses()	0
+-#define pcibios_scan_all_fns(a, b)	0
++static inline void
++pcibios_add_platform_entries(struct pci_dev *dev)
++{
++	/* no special handling */
++}
+ 
+-static inline void pcibios_set_master(struct pci_dev *dev)
++static inline void
++pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
++			 struct resource *res)
+ {
+-	/* No special bus mastering setup handling */
++#ifdef CONFIG_M54455
++	if ((res->start == 0xa0000000) || (res->start == 0xa8000000)) {
++		/* HACK!  FIX! kludge to fix bridge mapping */
++		region->start = res->start & 0x0fffffff;
++		region->end = res->end & 0x0fffffff;
++	} else {
++		region->start = res->start;
++		region->end = res->end;
++	}
++#else
++	region->start = res->start;
++	region->end = res->end;
++#endif
+ }
+ 
+-static inline void pcibios_penalize_isa_irq(int irq, int active)
++static inline void
++pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
++			struct pci_bus_region *region)
+ {
+-	/* We don't do dynamic PCI IRQ allocation */
++	res->start = region->start;
++	res->end = region->end;
+ }
+ 
+-/* The PCI address space does equal the physical memory
+- * address space.  The networking and block device layers use
+- * this boolean for bounce buffer decisions.
+- */
+-#define PCI_DMA_BUS_IS_PHYS	(1)
++static inline struct resource *
++pcibios_select_root(struct pci_dev *pdev, struct resource *res)
++{
++	struct resource *root = NULL;
++
++	if (res->flags & IORESOURCE_IO)
++		root = &ioport_resource;
++	if (res->flags & IORESOURCE_MEM)
++		root = &iomem_resource;
++
++	return root;
++}
+ 
++#endif /* CONFIG_PCI */
+ #endif /* _ASM_M68K_PCI_H */
+--- a/include/asm-m68k/pgalloc.h
++++ b/include/asm-m68k/pgalloc.h
+@@ -8,8 +8,10 @@
+ #include <asm/virtconvert.h>
+ 
+ 
+-#ifdef CONFIG_SUN3
++#if defined(CONFIG_SUN3)
+ #include <asm/sun3_pgalloc.h>
++#elif defined(CONFIG_COLDFIRE)
++#include <asm/cf_pgalloc.h>
+ #else
+ #include <asm/motorola_pgalloc.h>
+ #endif
+--- a/include/asm-m68k/pgtable.h
++++ b/include/asm-m68k/pgtable.h
+@@ -40,6 +40,8 @@
+ /* PGDIR_SHIFT determines what a third-level page table entry can map */
+ #ifdef CONFIG_SUN3
+ #define PGDIR_SHIFT     17
++#elif defined(CONFIG_COLDFIRE)
++#define PGDIR_SHIFT	22
+ #else
+ #define PGDIR_SHIFT	25
+ #endif
+@@ -54,6 +56,10 @@
+ #define PTRS_PER_PTE   16
+ #define PTRS_PER_PMD   1
+ #define PTRS_PER_PGD   2048
++#elif defined(CONFIG_COLDFIRE)
++#define PTRS_PER_PTE    512
++#define PTRS_PER_PMD    1
++#define PTRS_PER_PGD    1024
+ #else
+ #define PTRS_PER_PTE	1024
+ #define PTRS_PER_PMD	8
+@@ -66,6 +72,9 @@
+ #ifdef CONFIG_SUN3
+ #define KMAP_START     0x0DC00000
+ #define KMAP_END       0x0E000000
++#elif defined(CONFIG_COLDFIRE)
++#define KMAP_START	0xe0000000
++#define KMAP_END	0xf0000000
+ #else
+ #define	KMAP_START	0xd0000000
+ #define	KMAP_END	0xf0000000
+@@ -130,6 +139,8 @@ static inline void update_mmu_cache(stru
+ 
+ #ifdef CONFIG_SUN3
+ #include <asm/sun3_pgtable.h>
++#elif defined(CONFIG_COLDFIRE)
++#include <asm/cf_pgtable.h>
+ #else
+ #include <asm/motorola_pgtable.h>
+ #endif
+@@ -140,6 +151,9 @@ static inline void update_mmu_cache(stru
+ /*
+  * Macro to mark a page protection value as "uncacheable".
+  */
++#ifdef CONFIG_COLDFIRE
++# define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) | CF_PAGE_NOCACHE))
++#else /* CONFIG_COLDFIRE */
+ #ifdef SUN3_PAGE_NOCACHE
+ # define __SUN3_PAGE_NOCACHE	SUN3_PAGE_NOCACHE
+ #else
+@@ -154,6 +168,7 @@ static inline void update_mmu_cache(stru
+ 	    ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S))	\
+ 	    : (prot)))
+ 
++#endif /* CONFIG_COLDFIRE */
+ #endif /* !__ASSEMBLY__ */
+ 
+ /*
+--- a/include/asm-m68k/processor.h
++++ b/include/asm-m68k/processor.h
+@@ -22,24 +22,38 @@ static inline unsigned long rdusp(void)
+ {
+ 	unsigned long usp;
+ 
++#ifndef CONFIG_COLDFIRE
+ 	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
++#else
++	__asm__ __volatile__("movel %/usp,%0" : "=a" (usp));
++#endif
+ 	return usp;
+ }
+ 
+ static inline void wrusp(unsigned long usp)
+ {
++#ifndef CONFIG_COLDFIRE
+ 	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
++#else
++	__asm__ __volatile__("movel %0,%/usp" : : "a" (usp));
++#endif
+ }
+ 
+ /*
+  * User space process size: 3.75GB. This is hardcoded into a few places,
+  * so don't change it unless you know what you are doing.
+  */
+-#ifndef CONFIG_SUN3
++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
+ #define TASK_SIZE	(0xF0000000UL)
++#elif defined(CONFIG_COLDFIRE)
++#define TASK_SIZE       (0xC0000000UL)
++#else /* CONFIG_SUN3 */
++#ifdef __ASSEMBLY__
++#define TASK_SIZE	(0x0E000000)
+ #else
+ #define TASK_SIZE	(0x0E000000UL)
+ #endif
++#endif
+ 
+ #ifdef __KERNEL__
+ #define STACK_TOP	TASK_SIZE
+@@ -49,9 +63,11 @@ static inline void wrusp(unsigned long u
+ /* This decides where the kernel will search for a free chunk of vm
+  * space during mmap's.
+  */
+-#ifndef CONFIG_SUN3
+-#define TASK_UNMAPPED_BASE	0xC0000000UL
+-#else
++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
++#define TASK_UNMAPPED_BASE     0xC0000000UL
++#elif defined(CONFIG_COLDFIRE)
++#define TASK_UNMAPPED_BASE     0x80000000UL
++#else /* CONFIG_SUN3 */
+ #define TASK_UNMAPPED_BASE	0x0A000000UL
+ #endif
+ #define TASK_UNMAPPED_ALIGN(addr, off)	PAGE_ALIGN(addr)
+@@ -60,7 +76,11 @@ struct thread_struct {
+ 	unsigned long  ksp;		/* kernel stack pointer */
+ 	unsigned long  usp;		/* user stack pointer */
+ 	unsigned short sr;		/* saved status register */
++#ifndef CONFIG_COLDFIRE
+ 	unsigned short fs;		/* saved fs (sfc, dfc) */
++#else
++	mm_segment_t   fs;
++#endif
+ 	unsigned long  crp[2];		/* cpu root pointer */
+ 	unsigned long  esp0;		/* points to SR of stack frame */
+ 	unsigned long  faddr;		/* info about last fault */
+@@ -81,6 +101,7 @@ struct thread_struct {
+ /*
+  * Do necessary setup to start up a newly executed thread.
+  */
++#ifndef CONFIG_COLDFIRE
+ static inline void start_thread(struct pt_regs * regs, unsigned long pc,
+ 				unsigned long usp)
+ {
+@@ -91,6 +112,23 @@ static inline void start_thread(struct p
+ 	regs->sr &= ~0x2000;
+ 	wrusp(usp);
+ }
++#else
++/*
++ * Do necessary setup to start up a newly executed thread.
++ *
++ * pass the data segment into user programs if it exists,
++ * it can't hurt anything as far as I can tell
++ */
++#define start_thread(_regs, _pc, _usp)			\
++do {							\
++	set_fs(USER_DS); /* reads from user space */	\
++	(_regs)->pc = (_pc);				\
++	if (current->mm)				\
++		(_regs)->d5 = current->mm->start_data;	\
++	(_regs)->sr &= ~0x2000;				\
++	wrusp(_usp);					\
++} while (0)
++#endif
+ 
+ /* Forward declaration, a strange C thing */
+ struct task_struct;
+--- a/include/asm-m68k/ptrace.h
++++ b/include/asm-m68k/ptrace.h
+@@ -38,10 +38,21 @@ struct pt_regs {
+   long     d0;
+   long     orig_d0;
+   long     stkadj;
++#ifndef CONFIG_COLDFIRE
+   unsigned short sr;
+   unsigned long  pc;
+   unsigned format :  4; /* frame format specifier */
+   unsigned vector : 12; /* vector offset */
++#else
++  unsigned long mmuar;
++  unsigned long mmusr;
++  unsigned format : 4;  /* frame format specifier */
++  unsigned fs2 : 2;
++  unsigned vector: 8;
++  unsigned fs1 : 2;
++  unsigned short sr;
++  unsigned long pc;
++#endif
+ };
+ 
+ /*
+--- a/include/asm-m68k/raw_io.h
++++ b/include/asm-m68k/raw_io.h
+@@ -77,6 +77,7 @@ static inline void raw_outsb(volatile u8
+ 		out_8(port, *buf++);
+ }
+ 
++#ifndef CONFIG_COLDFIRE
+ static inline void raw_insw(volatile u16 __iomem *port, u16 *buf, unsigned int nr)
+ {
+ 	unsigned int tmp;
+@@ -342,6 +343,63 @@ static inline void raw_outsw_swapw(volat
+ 		: "d0", "a0", "a1", "d6");
+ }
+ 
++
++#else /*CONFIG_COLDFIRE */
++
++static inline void raw_insw(volatile u16 *port, u16 *buf, unsigned int nr)
++{
++	unsigned int i;
++
++	for (i = 0; i < nr; i++)
++		*buf++ = raw_inw(port);
++}
++
++static inline void raw_outsw(volatile u16 *port, const u16 *buf,
++	unsigned int nr)
++{
++	unsigned int i;
++
++	for (i = 0; i < nr; i++, buf++)
++		raw_outw(*buf, port);
++}
++
++static inline void raw_insl(volatile u32 *port, u32 *buf, unsigned int nr)
++{
++	unsigned int i;
++
++	for (i = 0; i < nr; i++)
++		*buf++ = raw_inl(port);
++}
++
++static inline void raw_outsl(volatile u32 *port, const u32 *buf,
++	unsigned int nr)
++{
++	unsigned int i;
++
++	for (i = 0; i < nr; i++, buf++)
++		raw_outl(*buf, port);
++}
++
++static inline void raw_insw_swapw(volatile u16 *port, u16 *buf,
++				  unsigned int nr)
++{
++	unsigned int i;
++
++	for (i = 0; i < nr; i++)
++		*buf++ = in_le16(port);
++
++}
++
++static inline void raw_outsw_swapw(volatile u16 __iomem *port, const u16 *buf,
++				   unsigned int nr)
++{
++	unsigned int i;
++
++	for (i = 0; i < nr; i++, buf++)
++		out_le16(port, *buf);
++}
++#endif /*CONFIG_COLDFIRE */
++
+ #endif /* __KERNEL__ */
+ 
+ #endif /* _RAW_IO_H */
+--- a/include/asm-m68k/segment.h
++++ b/include/asm-m68k/segment.h
+@@ -29,6 +29,7 @@ typedef struct {
+  * Get/set the SFC/DFC registers for MOVES instructions
+  */
+ 
++#ifndef CONFIG_COLDFIRE
+ static inline mm_segment_t get_fs(void)
+ {
+ 	mm_segment_t _v;
+@@ -50,6 +51,15 @@ static inline void set_fs(mm_segment_t v
+ 			      : /* no outputs */ : "r" (val.seg) : "memory");
+ }
+ 
++#else /* CONFIG_COLDFIRE */
++
++#include <asm/current.h>
++#define get_fs()        (current->thread.fs)
++#define set_fs(val)     (current->thread.fs = (val))
++#define get_ds()	(KERNEL_DS)
++
++#endif /* CONFIG_COLDFIRE */
++
+ #define segment_eq(a,b)	((a).seg == (b).seg)
+ 
+ #endif /* __ASSEMBLY__ */
+--- a/include/asm-m68k/setup.h
++++ b/include/asm-m68k/setup.h
+@@ -40,6 +40,7 @@
+ #define MACH_HP300    9
+ #define MACH_Q40     10
+ #define MACH_SUN3X   11
++#define MACH_CFMMU   12
+ 
+ #define COMMAND_LINE_SIZE 256
+ 
+@@ -189,6 +190,14 @@ extern unsigned long m68k_machtype;
+ #  define MACH_TYPE (MACH_SUN3X)
+ #endif
+ 
++#if !defined(CONFIG_COLDFIRE)
++#  define MACH_IS_COLDFIRE (0)
++#else
++#  define CONFIG_COLDFIRE_ONLY
++#  define MACH_IS_COLDFIRE (1)
++#  define MACH_TYPE (MACH_CFMMU)
++#endif
++
+ #ifndef MACH_TYPE
+ #  define MACH_TYPE (m68k_machtype)
+ #endif
+@@ -211,23 +220,31 @@ extern unsigned long m68k_machtype;
+ #define CPUB_68030     1
+ #define CPUB_68040     2
+ #define CPUB_68060     3
++#define CPUB_CFV4E     4
+ 
+ #define CPU_68020      (1<<CPUB_68020)
+ #define CPU_68030      (1<<CPUB_68030)
+ #define CPU_68040      (1<<CPUB_68040)
+ #define CPU_68060      (1<<CPUB_68060)
++#define CPU_CFV4E      (1<<CPUB_CFV4E)
+ 
+ #define FPUB_68881     0
+ #define FPUB_68882     1
+ #define FPUB_68040     2                       /* Internal FPU */
+ #define FPUB_68060     3                       /* Internal FPU */
+ #define FPUB_SUNFPA    4                       /* Sun-3 FPA */
++#define FPUB_CFV4E     5
+ 
+ #define FPU_68881      (1<<FPUB_68881)
+ #define FPU_68882      (1<<FPUB_68882)
+ #define FPU_68040      (1<<FPUB_68040)
+ #define FPU_68060      (1<<FPUB_68060)
+ #define FPU_SUNFPA     (1<<FPUB_SUNFPA)
++#ifndef CONFIG_M54455
++#define FPU_CFV4E      (1<<FPUB_CFV4E)
++#else
++#define FPU_CFV4E      0
++#endif
+ 
+ #define MMUB_68851     0
+ #define MMUB_68030     1                       /* Internal MMU */
+@@ -235,6 +252,7 @@ extern unsigned long m68k_machtype;
+ #define MMUB_68060     3                       /* Internal MMU */
+ #define MMUB_APOLLO    4                       /* Custom Apollo */
+ #define MMUB_SUN3      5                       /* Custom Sun-3 */
++#define MMUB_CFV4E     6
+ 
+ #define MMU_68851      (1<<MMUB_68851)
+ #define MMU_68030      (1<<MMUB_68030)
+@@ -242,6 +260,7 @@ extern unsigned long m68k_machtype;
+ #define MMU_68060      (1<<MMUB_68060)
+ #define MMU_SUN3       (1<<MMUB_SUN3)
+ #define MMU_APOLLO     (1<<MMUB_APOLLO)
++#define MMU_CFV4E      (1<<MMUB_CFV4E)
+ 
+ #ifdef __KERNEL__
+ 
+@@ -341,6 +360,14 @@ extern int m68k_is040or060;
+ #  endif
+ #endif
+ 
++#if !defined(CONFIG_CFV4E)
++#  define CPU_IS_COLDFIRE (0)
++#else
++#  define CPU_IS_COLDFIRE (1)
++#  define CPU_IS_CFV4E    (1)
++#  define MMU_IS_CFV4E    (1)
++#endif
++
+ #define CPU_TYPE (m68k_cputype)
+ 
+ #ifdef CONFIG_M68KFPU_EMU
+--- a/include/asm-m68k/signal.h
++++ b/include/asm-m68k/signal.h
+@@ -150,6 +150,7 @@ typedef struct sigaltstack {
+ #ifdef __KERNEL__
+ #include <asm/sigcontext.h>
+ 
++#ifndef CONFIG_COLDFIRE
+ #define __HAVE_ARCH_SIG_BITOPS
+ 
+ static inline void sigaddset(sigset_t *set, int _sig)
+@@ -200,6 +201,10 @@ static inline int sigfindinword(unsigned
+ 
+ struct pt_regs;
+ extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
++#else
++
++#define ptrace_signal_deliver(regs, cookie) do { } while (0)
++#endif /* CONFIG_COLDFIRE */
+ 
+ #endif /* __KERNEL__ */
+ 
+--- a/include/asm-m68k/string.h
++++ b/include/asm-m68k/string.h
+@@ -93,6 +93,7 @@ static inline char *strchr(const char *s
+ 	return (char *)s - 1;
+ }
+ 
++#ifndef CONFIG_COLDFIRE
+ #define __HAVE_ARCH_STRCMP
+ static inline int strcmp(const char *cs, const char *ct)
+ {
+@@ -110,6 +111,7 @@ static inline int strcmp(const char *cs,
+ 		: "+a" (cs), "+a" (ct), "=d" (res));
+ 	return res;
+ }
++#endif
+ 
+ #define __HAVE_ARCH_MEMSET
+ extern void *memset(void *, int, __kernel_size_t);
+--- a/include/asm-m68k/system.h
++++ b/include/asm-m68k/system.h
+@@ -63,16 +63,25 @@ asmlinkage void resume(void);
+ #define smp_read_barrier_depends()	((void)0)
+ 
+ /* interrupt control.. */
+-#if 0
+-#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
+-#else
+ #include <linux/hardirq.h>
++#ifndef CONFIG_COLDFIRE
+ #define local_irq_enable() ({							\
+ 	if (MACH_IS_Q40 || !hardirq_count())					\
+ 		asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory");	\
+ })
+-#endif
+ #define local_irq_disable() asm volatile ("oriw  #0x0700,%%sr": : : "memory")
++#else /* CONFIG_COLDFIRE */
++#define local_irq_enable()						\
++	asm volatile ("move.w %%sr, %%d0\n\t"				\
++		      "andil #0xf8ff,%%d0\n\t"				\
++		      "move.w %%d0, %%sr\n"				\
++		      : : : "cc", "d0", "memory")
++#define local_irq_disable()						\
++	asm volatile ("move %/sr,%%d0\n\t"				\
++		      "ori.l  #0x0700,%%d0\n\t"				\
++		      "move %%d0,%/sr\n"				\
++		      : : : "cc", "%d0", "memory")
++#endif
+ #define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
+ #define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
+ 
+--- a/include/asm-m68k/thread_info.h
++++ b/include/asm-m68k/thread_info.h
+@@ -58,5 +58,6 @@ struct thread_info {
+ #define TIF_DELAYED_TRACE	14	/* single step a syscall */
+ #define TIF_SYSCALL_TRACE	15	/* syscall trace active */
+ #define TIF_MEMDIE		16
++#define TIF_FREEZE		17	/* freezing processes */
+ 
+ #endif	/* _ASM_M68K_THREAD_INFO_H */
+--- a/include/asm-m68k/tlbflush.h
++++ b/include/asm-m68k/tlbflush.h
+@@ -2,7 +2,7 @@
+ #define _M68K_TLBFLUSH_H
+ 
+ 
+-#ifndef CONFIG_SUN3
++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
+ 
+ #include <asm/current.h>
+ 
+@@ -92,7 +92,12 @@ static inline void flush_tlb_kernel_rang
+ 	flush_tlb_all();
+ }
+ 
+-#else
++static inline void flush_tlb_pgtables(struct mm_struct *mm,
++				      unsigned long start, unsigned long end)
++{
++}
++
++#elif defined(CONFIG_SUN3)
+ 
+ 
+ /* Reserved PMEGs. */
+@@ -214,6 +219,13 @@ static inline void flush_tlb_kernel_page
+ 	sun3_put_segmap (addr & ~(SUN3_PMEG_SIZE - 1), SUN3_INVALID_PMEG);
+ }
+ 
++static inline void flush_tlb_pgtables(struct mm_struct *mm,
++				      unsigned long start, unsigned long end)
++{
++}
++
++#else /* CONFIG_COLDFIRE */
++#include <asm/cf_tlbflush.h>
+ #endif
+ 
+ #endif /* _M68K_TLBFLUSH_H */
+--- a/include/asm-m68k/uaccess.h
++++ b/include/asm-m68k/uaccess.h
+@@ -1,6 +1,9 @@
+ #ifndef __M68K_UACCESS_H
+ #define __M68K_UACCESS_H
+ 
++#ifdef CONFIG_COLDFIRE
++#include <asm/cf_uaccess.h>
++#else
+ /*
+  * User space memory access functions
+  */
+@@ -367,4 +370,5 @@ unsigned long __clear_user(void __user *
+ 
+ #define strlen_user(str) strnlen_user(str, 32767)
+ 
++#endif /* CONFIG_COLDFIRE */
+ #endif /* _M68K_UACCESS_H */
diff --git a/target/linux/coldfire/patches/003-mcfv4e_coldfire_headers2.patch b/target/linux/coldfire/patches/003-mcfv4e_coldfire_headers2.patch
new file mode 100644
index 0000000000..473cebcf7c
--- /dev/null
+++ b/target/linux/coldfire/patches/003-mcfv4e_coldfire_headers2.patch
@@ -0,0 +1,1865 @@
+From 3da86cd2810e9ba4e4a9e7471a92025172c1c990 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 31 Oct 2007 16:41:41 -0600
+Subject: [PATCH] Add Coldfire specific header files.
+
+LTIBName: mcfv4e-coldfire-headers2
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ include/asm-m68k/cf_cacheflush.h |  160 ++++++++++++++++
+ include/asm-m68k/cf_entry.h      |  146 +++++++++++++++
+ include/asm-m68k/cf_pgalloc.h    |   99 ++++++++++
+ include/asm-m68k/cf_pgtable.h    |  357 ++++++++++++++++++++++++++++++++++++
+ include/asm-m68k/cf_tlbflush.h   |   59 ++++++
+ include/asm-m68k/cf_uaccess.h    |  376 ++++++++++++++++++++++++++++++++++++++
+ include/asm-m68k/cfcache.h       |   86 +++++++++
+ include/asm-m68k/cfmmu.h         |  104 +++++++++++
+ include/asm-m68k/coldfire.h      |   38 ++++
+ include/asm-m68k/coldfire_edma.h |   39 ++++
+ include/asm-m68k/mcfqspi.h       |   50 +++++
+ include/asm-m68k/mcfsim.h        |   96 ++++++++++
+ include/asm-m68k/mcfuart.h       |  180 ++++++++++++++++++
+ 13 files changed, 1790 insertions(+), 0 deletions(-)
+ create mode 100644 include/asm-m68k/cf_cacheflush.h
+ create mode 100644 include/asm-m68k/cf_entry.h
+ create mode 100644 include/asm-m68k/cf_pgalloc.h
+ create mode 100644 include/asm-m68k/cf_pgtable.h
+ create mode 100644 include/asm-m68k/cf_tlbflush.h
+ create mode 100644 include/asm-m68k/cf_uaccess.h
+ create mode 100644 include/asm-m68k/cfcache.h
+ create mode 100644 include/asm-m68k/cfmmu.h
+ create mode 100644 include/asm-m68k/coldfire.h
+ create mode 100644 include/asm-m68k/coldfire_edma.h
+ create mode 100644 include/asm-m68k/mcfqspi.h
+ create mode 100644 include/asm-m68k/mcfsim.h
+ create mode 100644 include/asm-m68k/mcfuart.h
+
+--- /dev/null
++++ b/include/asm-m68k/cf_cacheflush.h
+@@ -0,0 +1,160 @@
++#ifndef M68K_CF_CACHEFLUSH_H
++#define M68K_CF_CACHEFLUSH_H
++
++#include <asm/cfcache.h>
++
++/*
++ * Cache handling functions
++ */
++
++#define flush_icache()						\
++({								\
++  unsigned long set;						\
++  unsigned long start_set;					\
++  unsigned long end_set;					\
++								\
++  start_set = 0;						\
++  end_set = (unsigned long)LAST_DCACHE_ADDR;			\
++								\
++  for (set = start_set; set <= end_set; set += (0x10 - 3)) 	\
++    asm volatile("cpushl %%ic,(%0)\n"				\
++		 "\taddq%.l #1,%0\n"				\
++		 "\tcpushl %%ic,(%0)\n"				\
++		 "\taddq%.l #1,%0\n"				\
++		 "\tcpushl %%ic,(%0)\n"				\
++		 "\taddq%.l #1,%0\n"				\
++		 "\tcpushl %%ic,(%0)" : : "a" (set));		\
++})
++
++/*
++ * invalidate the cache for the specified memory range.
++ * It starts at the physical address specified for
++ * the given number of bytes.
++ */
++extern void cache_clear(unsigned long paddr, int len);
++/*
++ * push any dirty cache in the specified memory range.
++ * It starts at the physical address specified for
++ * the given number of bytes.
++ */
++extern void cache_push(unsigned long paddr, int len);
++
++/*
++ * push and invalidate pages in the specified user virtual
++ * memory range.
++ */
++extern void cache_push_v(unsigned long vaddr, int len);
++
++/* This is needed whenever the virtual mapping of the current
++   process changes.  */
++
++
++#define flush_cache_all()		do { } while (0)
++#define flush_cache_mm(mm)		do { } while (0)
++#define flush_cache_range(mm, a, b)	do { } while (0)
++#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
++
++#define flush_dcache_range(paddr, len)	do { } while (0)
++
++/* Push the page at kernel virtual address and clear the icache */
++/* use cpush %bc instead of cpush %dc, cinv %ic */
++#define flush_page_to_ram(page) __flush_page_to_ram((void *) page_address(page))
++extern inline void __flush_page_to_ram(void *address)
++{
++  unsigned long set;
++  unsigned long start_set;
++  unsigned long end_set;
++  unsigned long addr = (unsigned long) address;
++
++  addr &= ~(PAGE_SIZE - 1); /* round down to page start address */
++
++  start_set = addr & _ICACHE_SET_MASK;
++  end_set = (addr + PAGE_SIZE-1) & _ICACHE_SET_MASK;
++
++  if (start_set > end_set) {
++    /* from the begining to the lowest address */
++    for (set = 0; set <= end_set; set += (0x10 - 3))
++      asm volatile("cpushl %%bc,(%0)\n"
++		   "\taddq%.l #1,%0\n"
++		   "\tcpushl %%bc,(%0)\n"
++		   "\taddq%.l #1,%0\n"
++		   "\tcpushl %%bc,(%0)\n"
++		   "\taddq%.l #1,%0\n"
++		   "\tcpushl %%bc,(%0)" : : "a" (set));
++
++    /* next loop will finish the cache ie pass the hole */
++    end_set = LAST_ICACHE_ADDR;
++  }
++  for (set = start_set; set <= end_set; set += (0x10 - 3))
++    asm volatile("cpushl %%bc,(%0)\n"
++		 "\taddq%.l #1,%0\n"
++		 "\tcpushl %%bc,(%0)\n"
++		 "\taddq%.l #1,%0\n"
++		 "\tcpushl %%bc,(%0)\n"
++		 "\taddq%.l #1,%0\n"
++		 "\tcpushl %%bc,(%0)" : : "a" (set));
++}
++
++#define flush_dcache_page(page)			do { } while (0)
++#define flush_icache_page(vma, pg)		do { } while (0)
++#define flush_icache_user_range(adr, len)	do { } while (0)
++/* NL */
++#define flush_icache_user_page(vma, page, addr, len)	do { } while (0)
++
++/* Push n pages at kernel virtual address and clear the icache */
++/* use cpush %bc instead of cpush %dc, cinv %ic */
++extern inline void flush_icache_range(unsigned long address,
++				      unsigned long endaddr)
++{
++  unsigned long set;
++  unsigned long start_set;
++  unsigned long end_set;
++
++  start_set = address & _ICACHE_SET_MASK;
++  end_set = endaddr & _ICACHE_SET_MASK;
++
++  if (start_set > end_set) {
++    /* from the begining to the lowest address */
++    for (set = 0; set <= end_set; set += (0x10 - 3))
++      asm volatile("cpushl %%ic,(%0)\n"
++		   "\taddq%.l #1,%0\n"
++		   "\tcpushl %%ic,(%0)\n"
++		   "\taddq%.l #1,%0\n"
++		   "\tcpushl %%ic,(%0)\n"
++		   "\taddq%.l #1,%0\n"
++		   "\tcpushl %%ic,(%0)" : : "a" (set));
++
++    /* next loop will finish the cache ie pass the hole */
++    end_set = LAST_ICACHE_ADDR;
++  }
++  for (set = start_set; set <= end_set; set += (0x10 - 3))
++    asm volatile("cpushl %%ic,(%0)\n"
++		 "\taddq%.l #1,%0\n"
++		 "\tcpushl %%ic,(%0)\n"
++		 "\taddq%.l #1,%0\n"
++		 "\tcpushl %%ic,(%0)\n"
++		 "\taddq%.l #1,%0\n"
++		 "\tcpushl %%ic,(%0)" : : "a" (set));
++}
++
++static inline void copy_to_user_page(struct vm_area_struct *vma,
++				     struct page *page, unsigned long vaddr,
++				     void *dst, void *src, int len)
++{
++	memcpy(dst, src, len);
++	flush_icache_user_page(vma, page, vaddr, len);
++}
++static inline void copy_from_user_page(struct vm_area_struct *vma,
++				       struct page *page, unsigned long vaddr,
++				       void *dst, void *src, int len)
++{
++	memcpy(dst, src, len);
++}
++
++#define flush_cache_dup_mm(mm)			flush_cache_mm(mm)
++#define flush_cache_vmap(start, end)		flush_cache_all()
++#define flush_cache_vunmap(start, end)		flush_cache_all()
++#define flush_dcache_mmap_lock(mapping)		do { } while (0)
++#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
++
++#endif /* M68K_CF_CACHEFLUSH_H */
+--- /dev/null
++++ b/include/asm-m68k/cf_entry.h
+@@ -0,0 +1,146 @@
++#ifndef __CF_M68K_ENTRY_H
++#define __CF_M68K_ENTRY_H
++
++#include <asm/setup.h>
++#include <asm/page.h>
++#include <asm/coldfire.h>
++#include <asm/cfmmu.h>
++#include <asm/asm-offsets.h>
++
++/*
++ * Stack layout in 'ret_from_exception':
++ *
++ *	This allows access to the syscall arguments in registers d1-d5
++ *
++ *	 0(sp) - d1
++ *	 4(sp) - d2
++ *	 8(sp) - d3
++ *	 C(sp) - d4
++ *	10(sp) - d5
++ *	14(sp) - a0
++ *	18(sp) - a1
++ *	1C(sp) - a2
++ *	20(sp) - d0
++ *	24(sp) - orig_d0
++ *	28(sp) - stack adjustment
++ *	2C(sp) - sr
++ *	2E(sp) - pc
++ *	32(sp) - format & vector
++ *	36(sp) - MMUSR
++ *	3A(sp) - MMUAR
++ */
++
++/*
++ * 97/05/14 Andreas: Register %a2 is now set to the current task throughout
++ *		     the whole kernel.
++ */
++
++/* the following macro is used when enabling interrupts */
++/* portable version */
++#define ALLOWINT	(~0x700)
++#define	MAX_NOINT_IPL	0
++
++#ifdef __ASSEMBLY__
++
++#define curptr a2
++
++LFLUSH_I_AND_D = 0x00000808
++LSIGTRAP = 5
++
++/* process bits for task_struct.ptrace */
++PT_TRACESYS_OFF = 3
++PT_TRACESYS_BIT = 1
++PT_PTRACED_OFF = 3
++PT_PTRACED_BIT = 0
++PT_DTRACE_OFF = 3
++PT_DTRACE_BIT = 2
++
++#define SAVE_ALL_INT save_all_int
++#define SAVE_ALL_SYS save_all_sys
++#define RESTORE_ALL restore_all
++/*
++ * This defines the normal kernel pt-regs layout.
++ *
++ * regs a3-a6 and d6-d7 are preserved by C code
++ * the kernel doesn't mess with usp unless it needs to
++ */
++
++/*
++ * a -1 in the orig_d0 field signifies
++ * that the stack frame is NOT for syscall
++ */
++.macro	save_all_int
++	movel	MMUSR,%sp@-
++	movel	MMUAR,%sp@-
++	clrl	%sp@-		| stk_adj
++	pea	-1:w		| orig d0
++	movel	%d0,%sp@-	| d0
++	subal	#(8*4), %sp
++	moveml	%d1-%d5/%a0-%a1/%curptr,%sp@
++.endm
++
++.macro	save_all_sys
++	movel	MMUSR,%sp@-
++	movel	MMUAR,%sp@-
++	clrl	%sp@-		| stk_adj
++	movel	%d0,%sp@-	| orig d0
++	movel	%d0,%sp@-	| d0
++	subal	#(8*4), %sp
++	moveml	%d1-%d5/%a0-%a1/%curptr,%sp@
++.endm
++
++.macro	restore_all
++	moveml	%sp@,%a0-%a1/%curptr/%d1-%d5
++	addal	#(8*4), %sp
++	movel	%sp@+,%d0	| d0
++	addql	#4,%sp		| orig d0
++	addl	%sp@+,%sp	| stk_adj
++	addql	#8,%sp		| MMUAR & MMUSR
++	rte
++.endm
++
++#define SWITCH_STACK_SIZE (6*4+4)	/* includes return address */
++
++#define SAVE_SWITCH_STACK save_switch_stack
++#define RESTORE_SWITCH_STACK restore_switch_stack
++#define GET_CURRENT(tmp) get_current tmp
++
++.macro	save_switch_stack
++	subal	#(6*4), %sp
++	moveml	%a3-%a6/%d6-%d7,%sp@
++.endm
++
++.macro	restore_switch_stack
++	moveml	%sp@,%a3-%a6/%d6-%d7
++	addal	#(6*4), %sp
++.endm
++
++.macro	get_current reg=%d0
++	movel	%sp,\reg
++	andl	#-THREAD_SIZE,\reg
++	movel	\reg,%curptr
++	movel	%curptr@,%curptr
++.endm
++
++#else /* C source */
++
++#define STR(X) STR1(X)
++#define STR1(X) #X
++
++#define PT_OFF_ORIG_D0	 0x24
++#define PT_OFF_FORMATVEC 0x32
++#define PT_OFF_SR	 0x2C
++#define SAVE_ALL_INT				\
++	"clrl	%%sp@-;"    /* stk_adj */	\
++	"pea	-1:w;"	    /* orig d0 = -1 */	\
++	"movel	%%d0,%%sp@-;" /* d0 */		\
++	"subal	#(8*4),%sp"			\
++	"moveml	%%d1-%%d5/%%a0-%%a2,%%sp@"
++#define GET_CURRENT(tmp) \
++	"movel	%%sp,"#tmp"\n\t" \
++	"andw	#-"STR(THREAD_SIZE)","#tmp"\n\t" \
++	"movel	"#tmp",%%a2\n\t"
++
++#endif
++
++#endif /* __CF_M68K_ENTRY_H */
+--- /dev/null
++++ b/include/asm-m68k/cf_pgalloc.h
+@@ -0,0 +1,99 @@
++#ifndef M68K_CF_PGALLOC_H
++#define M68K_CF_PGALLOC_H
++
++#include <asm/coldfire.h>
++#include <asm/page.h>
++#include <asm/cf_tlbflush.h>
++
++extern inline void pte_free_kernel(pte_t *pte)
++{
++	free_page((unsigned long) pte);
++}
++
++extern const char bad_pmd_string[];
++
++extern inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
++	unsigned long address)
++{
++	unsigned long page = __get_free_page(GFP_DMA|__GFP_REPEAT);
++
++	if (!page)
++		return NULL;
++
++	memset((void *)page, 0, PAGE_SIZE);
++	return (pte_t *) (page);
++}
++
++extern inline pmd_t *pmd_alloc_kernel(pgd_t *pgd, unsigned long address)
++{
++	return (pmd_t *) pgd;
++}
++
++#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); })
++#define pmd_alloc_one(mm, address)      ({ BUG(); ((pmd_t *)2); })
++
++#define pte_alloc_one_fast(mm, addr) pte_alloc_one(mm, addr)
++
++#define pmd_populate(mm, pmd, page) (pmd_val(*pmd) = \
++	(unsigned long)(page_address(page)))
++#define pmd_populate_kernel(mm, pmd, pte) (pmd_val(*pmd) = (unsigned long)(pte))
++
++static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *page)
++{
++	__free_page(page);
++}
++
++#define __pmd_free_tlb(tlb, pmd) do { } while (0)
++
++static inline struct page *pte_alloc_one(struct mm_struct *mm,
++	unsigned long address)
++{
++	struct page *page = alloc_pages(GFP_DMA|__GFP_REPEAT, 0);
++	pte_t *pte;
++
++	if (!page)
++		return NULL;
++
++	pte = kmap(page);
++	if (pte) {
++		clear_page(pte);
++		__flush_page_to_ram(pte);
++		flush_tlb_kernel_page(pte);
++		nocache_page(pte);
++	}
++	kunmap(pte);
++
++	return page;
++}
++
++extern inline void pte_free(struct page *page)
++{
++	__free_page(page);
++}
++
++/*
++ * In our implementation, each pgd entry contains 1 pmd that is never allocated
++ * or freed.  pgd_present is always 1, so this should never be called. -NL
++ */
++#define pmd_free(pmd) BUG()
++
++extern inline void pgd_free(pgd_t *pgd)
++{
++	free_page((unsigned long) pgd);
++}
++
++extern inline pgd_t *pgd_alloc(struct mm_struct *mm)
++{
++     pgd_t *new_pgd;
++
++     new_pgd = (pgd_t *)__get_free_page(GFP_DMA | __GFP_NOWARN);
++     if (!new_pgd)
++	     return NULL;
++     memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE);
++     memset(new_pgd, 0, PAGE_OFFSET >> PGDIR_SHIFT);
++     return new_pgd;
++}
++
++#define pgd_populate(mm, pmd, pte) BUG()
++
++#endif /* M68K_CF_PGALLOC_H */
+--- /dev/null
++++ b/include/asm-m68k/cf_pgtable.h
+@@ -0,0 +1,357 @@
++#ifndef _CF_PGTABLE_H
++#define _CF_PGTABLE_H
++
++#include <asm/cfmmu.h>
++#include <asm/page.h>
++
++#ifndef __ASSEMBLY__
++#include <asm/virtconvert.h>
++#include <linux/linkage.h>
++
++/* For virtual address to physical address conversion */
++#define VTOP(addr)	__pa(addr)
++#define PTOV(addr)	__va(addr)
++
++
++#endif	/* !__ASSEMBLY__ */
++
++/* Page protection values within PTE. */
++
++/* MMUDR bits, in proper place. */
++#define CF_PAGE_LOCKED      (0x00000002)
++#define CF_PAGE_EXEC        (0x00000004)
++#define CF_PAGE_WRITABLE    (0x00000008)
++#define CF_PAGE_READABLE    (0x00000010)
++#define CF_PAGE_SYSTEM      (0x00000020)
++#define CF_PAGE_COPYBACK    (0x00000040)
++#define CF_PAGE_NOCACHE     (0x00000080)
++
++#define CF_CACHEMASK       (~0x00000040)
++#define CF_PAGE_MMUDR_MASK  (0x000000fe)
++
++#define _PAGE_NOCACHE030  (CF_PAGE_NOCACHE)
++
++/* MMUTR bits, need shifting down.  */
++#define CF_PAGE_VALID       (0x00000400)
++#define CF_PAGE_SHARED      (0x00000800)
++
++#define CF_PAGE_MMUTR_MASK  (0x00000c00)
++#define CF_PAGE_MMUTR_SHIFT (10)
++#define CF_ASID_MMU_SHIFT   (2)
++
++/* Fake bits, not implemented in CF, will get masked out before
++   hitting hardware, and might go away altogether once this port is
++   complete.  */
++#if PAGE_SHIFT < 13
++#error COLDFIRE Error: Pages must be at least 8k in size
++#endif
++#define CF_PAGE_ACCESSED    (0x00001000)
++#define CF_PAGE_FILE        (0x00000200)
++#define CF_PAGE_DIRTY       (0x00000001)
++
++#define _PAGE_CACHE040	0x020   /* 68040 cache mode, cachable, copyback */
++#define _PAGE_NOCACHE_S 0x040   /* 68040 no-cache mode, serialized */
++#define _PAGE_NOCACHE   0x060   /* 68040 cache mode, non-serialized */
++#define _PAGE_CACHE040W 0x000   /* 68040 cache mode, cachable, write-through */
++#define _DESCTYPE_MASK  0x003
++#define _CACHEMASK040   (~0x060)
++#define _PAGE_GLOBAL040 0x400   /* 68040 global bit, used for kva descs */
++
++
++/* Externally used page protection values. */
++#define _PAGE_PRESENT	(CF_PAGE_VALID)
++#define _PAGE_ACCESSED	(CF_PAGE_ACCESSED)
++#define _PAGE_DIRTY	(CF_PAGE_DIRTY)
++#define _PAGE_READWRITE (CF_PAGE_WRITABLE \
++			| CF_PAGE_READABLE \
++			| CF_PAGE_SYSTEM \
++			| CF_PAGE_SHARED)
++
++/* Compound page protection values. */
++#define PAGE_NONE	__pgprot(CF_PAGE_VALID \
++				 | CF_PAGE_ACCESSED)
++
++#define PAGE_SHARED     __pgprot(CF_PAGE_VALID \
++				 | CF_PAGE_ACCESSED \
++				 | CF_PAGE_SHARED)
++
++#define PAGE_INIT	__pgprot(CF_PAGE_VALID \
++				 | CF_PAGE_WRITABLE \
++				 | CF_PAGE_READABLE \
++				 | CF_PAGE_EXEC \
++				 | CF_PAGE_SYSTEM \
++				 | CF_PAGE_SHARED)
++
++#define PAGE_KERNEL	__pgprot(CF_PAGE_VALID \
++				 | CF_PAGE_WRITABLE \
++				 | CF_PAGE_READABLE \
++				 | CF_PAGE_EXEC \
++				 | CF_PAGE_SYSTEM \
++				 | CF_PAGE_SHARED \
++				 | CF_PAGE_ACCESSED)
++
++#define PAGE_COPY	__pgprot(CF_PAGE_VALID \
++				 | CF_PAGE_ACCESSED \
++				 | CF_PAGE_READABLE \
++				 | CF_PAGE_DIRTY)
++/*
++ * Page protections for initialising protection_map.  See mm/mmap.c
++ * for use.  In general, the bit positions are xwr, and P-items are
++ * private, the S-items are shared.
++ */
++
++#define __P000	PAGE_NONE
++#define __P100	__pgprot(CF_PAGE_VALID \
++			 | CF_PAGE_ACCESSED \
++			 | CF_PAGE_EXEC)
++#define __P010	__pgprot(CF_PAGE_VALID \
++			 | CF_PAGE_WRITABLE \
++			 | CF_PAGE_ACCESSED)
++#define __P110	__pgprot(CF_PAGE_VALID \
++			 | CF_PAGE_ACCESSED \
++			 | CF_PAGE_WRITABLE \
++			 | CF_PAGE_EXEC)
++#define __P001	__pgprot(CF_PAGE_VALID \
++			 | CF_PAGE_ACCESSED \
++			 | CF_PAGE_READABLE)
++#define __P101	__pgprot(CF_PAGE_VALID \
++			 | CF_PAGE_ACCESSED \
++			 | CF_PAGE_READABLE \
++			 | CF_PAGE_EXEC)
++#define __P011	__pgprot(CF_PAGE_VALID \
++			 | CF_PAGE_READABLE \
++			 | CF_PAGE_WRITABLE \
++			 | CF_PAGE_ACCESSED)
++#define __P111	__pgprot(CF_PAGE_VALID \
++			 | CF_PAGE_ACCESSED \
++			 | CF_PAGE_WRITABLE \
++			 | CF_PAGE_READABLE \
++			 | CF_PAGE_EXEC)
++
++#define __S000	PAGE_NONE
++#define __S100	__pgprot(CF_PAGE_VALID \
++			 | CF_PAGE_ACCESSED \
++			 | CF_PAGE_SHARED \
++			 | CF_PAGE_EXEC)
++#define __S010	PAGE_SHARED
++#define __S110	__pgprot(CF_PAGE_VALID \
++			 | CF_PAGE_ACCESSED \
++			 | CF_PAGE_SHARED \
++			 | CF_PAGE_EXEC)
++#define __S001	__pgprot(CF_PAGE_VALID \
++			 | CF_PAGE_ACCESSED \
++			 | CF_PAGE_SHARED \
++			 | CF_PAGE_READABLE)
++#define __S101	__pgprot(CF_PAGE_VALID \
++			 | CF_PAGE_ACCESSED \
++			 | CF_PAGE_SHARED \
++			 | CF_PAGE_READABLE \
++			 | CF_PAGE_EXEC)
++#define __S011	__pgprot(CF_PAGE_VALID \
++			 | CF_PAGE_ACCESSED \
++			 | CF_PAGE_SHARED \
++			 | CF_PAGE_READABLE)
++#define __S111	__pgprot(CF_PAGE_VALID \
++			 | CF_PAGE_ACCESSED \
++			 | CF_PAGE_SHARED \
++			 | CF_PAGE_READABLE \
++			 | CF_PAGE_EXEC)
++
++#define PTE_MASK	PAGE_MASK
++#define CF_PAGE_CHG_MASK	(PTE_MASK | CF_PAGE_ACCESSED | CF_PAGE_DIRTY)
++
++#ifndef __ASSEMBLY__
++
++/*
++ * Conversion functions: convert a page and protection to a page entry,
++ * and a page entry and page directory to the page they refer to.
++ */
++#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
++
++extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
++{
++	pte_val(pte) = (pte_val(pte) & CF_PAGE_CHG_MASK) | pgprot_val(newprot);
++	return pte;
++}
++
++#define pmd_set(pmdp, ptep) do {} while (0)
++
++extern inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
++{
++	pgd_val(*pgdp) = virt_to_phys(pmdp);
++}
++
++#define __pte_page(pte) \
++	((unsigned long) ((pte_val(pte) & CF_PAGE_PGNUM_MASK) + PAGE_OFFSET))
++#define __pmd_page(pmd) ((unsigned long) (pmd_val(pmd)))
++
++extern inline int pte_none(pte_t pte)
++{
++	return !pte_val(pte);
++}
++extern inline int pte_present(pte_t pte)
++{
++	return pte_val(pte) & CF_PAGE_VALID;
++}
++extern inline void pte_clear(struct mm_struct *mm, unsigned long addr,
++	pte_t *ptep)
++{
++	pte_val(*ptep) = 0;
++}
++
++#define pte_pagenr(pte)		((__pte_page(pte) - PAGE_OFFSET) >> PAGE_SHIFT)
++#define pte_page(pte)		virt_to_page(__pte_page(pte))
++
++extern inline int pmd_none2(pmd_t *pmd) { return !pmd_val(*pmd); }
++#define pmd_none(pmd) pmd_none2(&(pmd))
++extern inline int pmd_bad2(pmd_t *pmd) { return 0; }
++#define pmd_bad(pmd) pmd_bad2(&(pmd))
++#define pmd_present(pmd) (!pmd_none2(&(pmd)))
++extern inline void pmd_clear(pmd_t *pmdp) { pmd_val(*pmdp) = 0; }
++
++extern inline int pgd_none(pgd_t pgd) { return 0; }
++extern inline int pgd_bad(pgd_t pgd) { return 0; }
++extern inline int pgd_present(pgd_t pgd) { return 1; }
++extern inline void pgd_clear(pgd_t *pgdp) {}
++
++
++#define pte_ERROR(e) \
++	printk(KERN_ERR "%s:%d: bad pte %08lx.\n",	\
++	__FILE__, __LINE__, pte_val(e))
++#define pmd_ERROR(e) \
++	printk(KERN_ERR "%s:%d: bad pmd %08lx.\n",	\
++	__FILE__, __LINE__, pmd_val(e))
++#define pgd_ERROR(e) \
++	printk(KERN_ERR "%s:%d: bad pgd %08lx.\n",	\
++	__FILE__, __LINE__, pgd_val(e))
++
++
++/*
++ * The following only work if pte_present() is true.
++ * Undefined behaviour if not...
++ * [we have the full set here even if they don't change from m68k]
++ */
++extern inline int pte_read(pte_t pte)	\
++	{ return pte_val(pte) & CF_PAGE_READABLE; }
++extern inline int pte_write(pte_t pte)	\
++	{ return pte_val(pte) & CF_PAGE_WRITABLE; }
++extern inline int pte_exec(pte_t pte)	\
++	{ return pte_val(pte) & CF_PAGE_EXEC; }
++extern inline int pte_dirty(pte_t pte)	\
++	{ return pte_val(pte) & CF_PAGE_DIRTY; }
++extern inline int pte_young(pte_t pte)	\
++	{ return pte_val(pte) & CF_PAGE_ACCESSED; }
++extern inline int pte_file(pte_t pte)	\
++	{ return pte_val(pte) & CF_PAGE_FILE; }
++
++extern inline pte_t pte_wrprotect(pte_t pte)	\
++	{ pte_val(pte) &= ~CF_PAGE_WRITABLE; return pte; }
++extern inline pte_t pte_rdprotect(pte_t pte)	\
++	{ pte_val(pte) &= ~CF_PAGE_READABLE; return pte; }
++extern inline pte_t pte_exprotect(pte_t pte)	\
++	{ pte_val(pte) &= ~CF_PAGE_EXEC; return pte; }
++extern inline pte_t pte_mkclean(pte_t pte)	\
++	{ pte_val(pte) &= ~CF_PAGE_DIRTY; return pte; }
++extern inline pte_t pte_mkold(pte_t pte)	\
++	{ pte_val(pte) &= ~CF_PAGE_ACCESSED; return pte; }
++extern inline pte_t pte_mkwrite(pte_t pte)	\
++	{ pte_val(pte) |= CF_PAGE_WRITABLE; return pte; }
++extern inline pte_t pte_mkread(pte_t pte)	\
++	{ pte_val(pte) |= CF_PAGE_READABLE; return pte; }
++extern inline pte_t pte_mkexec(pte_t pte)	\
++	{ pte_val(pte) |= CF_PAGE_EXEC; return pte; }
++extern inline pte_t pte_mkdirty(pte_t pte)	\
++	{ pte_val(pte) |= CF_PAGE_DIRTY; return pte; }
++extern inline pte_t pte_mkyoung(pte_t pte)	\
++	{ pte_val(pte) |= CF_PAGE_ACCESSED; return pte; }
++extern inline pte_t pte_mknocache(pte_t pte)	\
++	{ pte_val(pte) |= 0x80 | (pte_val(pte) & ~0x40); return pte; }
++extern inline pte_t pte_mkcache(pte_t pte)	\
++	{ pte_val(pte) &= ~CF_PAGE_NOCACHE; return pte; }
++
++#define swapper_pg_dir kernel_pg_dir
++extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
++
++/* Find an entry in a pagetable directory. */
++#define pgd_index(address)     ((address) >> PGDIR_SHIFT)
++
++#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
++
++/* Find an entry in a kernel pagetable directory. */
++#define pgd_offset_k(address) pgd_offset(&init_mm, address)
++
++/* Find an entry in the second-level pagetable. */
++extern inline pmd_t *pmd_offset(pgd_t *pgd, unsigned long address)
++{
++	return (pmd_t *) pgd;
++}
++
++/* Find an entry in the third-level pagetable. */
++#define __pte_offset(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
++#define pte_offset_kernel(dir, address) ((pte_t *) __pmd_page(*(dir)) + \
++					  __pte_offset(address))
++
++/* Disable caching for page at given kernel virtual address. */
++static inline void nocache_page(void *vaddr)
++{
++	pgd_t *dir;
++	pmd_t *pmdp;
++	pte_t *ptep;
++	unsigned long addr = (unsigned long)vaddr;
++
++	dir = pgd_offset_k(addr);
++	pmdp = pmd_offset(dir, addr);
++	ptep = pte_offset_kernel(pmdp, addr);
++	*ptep = pte_mknocache(*ptep);
++}
++
++/* Enable caching for page at given kernel virtual address. */
++static inline void cache_page(void *vaddr)
++{
++	pgd_t *dir;
++	pmd_t *pmdp;
++	pte_t *ptep;
++	unsigned long addr = (unsigned long)vaddr;
++
++	dir = pgd_offset_k(addr);
++	pmdp = pmd_offset(dir, addr);
++	ptep = pte_offset_kernel(pmdp, addr);
++	*ptep = pte_mkcache(*ptep);
++}
++
++#define PTE_FILE_MAX_BITS	21
++#define PTE_FILE_SHIFT		11
++
++static inline unsigned long pte_to_pgoff(pte_t pte)
++{
++	return pte_val(pte) >> PTE_FILE_SHIFT;
++}
++
++static inline pte_t pgoff_to_pte(unsigned pgoff)
++{
++	pte_t pte = __pte((pgoff << PTE_FILE_SHIFT) + CF_PAGE_FILE);
++	return pte;
++}
++
++/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */
++#define __swp_entry(type, offset) ((swp_entry_t) { (type) |	\
++				   (offset << PTE_FILE_SHIFT) })
++#define __swp_type(x)		((x).val & 0xFF)
++#define __swp_offset(x)		((x).val >> PTE_FILE_SHIFT)
++#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
++#define __swp_entry_to_pte(x)	(__pte((x).val))
++
++#define pmd_page(pmd)		virt_to_page(__pmd_page(pmd))
++
++#define pte_offset_map(pmdp, address) ((pte_t *)__pmd_page(*pmdp) +	\
++				       __pte_offset(address))
++#define pte_offset_map_nested(pmdp, address) pte_offset_map(pmdp, address)
++#define pte_unmap(pte) kunmap(pte)
++#define pte_unmap_nested(pte) kunmap(pte)
++
++#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
++#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
++
++
++#endif	/* !__ASSEMBLY__ */
++#endif	/* !_CF_PGTABLE_H */
+--- /dev/null
++++ b/include/asm-m68k/cf_tlbflush.h
+@@ -0,0 +1,59 @@
++#ifndef M68K_CF_TLBFLUSH_H
++#define M68K_CF_TLBFLUSH_H
++
++#include <asm/coldfire.h>
++
++/* Flush all userspace mappings.  */
++static inline void flush_tlb_all(void)
++{
++	preempt_disable();
++	*MMUOR = MMUOR_CNL;
++	preempt_enable();
++}
++
++/* Clear user TLB entries within the context named in mm */
++static inline void flush_tlb_mm(struct mm_struct *mm)
++{
++	preempt_disable();
++	*MMUOR = MMUOR_CNL;
++	preempt_enable();
++}
++
++/* Flush a single TLB page.  */
++static inline void flush_tlb_page(struct vm_area_struct *vma,
++				   unsigned long addr)
++{
++	preempt_disable();
++	*MMUOR = MMUOR_CNL;
++	preempt_enable();
++}
++/* Flush a range of pages from TLB. */
++
++static inline void flush_tlb_range(struct mm_struct *mm,
++		      unsigned long start, unsigned long end)
++{
++	preempt_disable();
++	*MMUOR = MMUOR_CNL;
++	preempt_enable();
++}
++
++/* Flush kernel page from TLB. */
++static inline void flush_tlb_kernel_page(void *addr)
++{
++	preempt_disable();
++	*MMUOR = MMUOR_CNL;
++	preempt_enable();
++}
++
++static inline void flush_tlb_kernel_range(unsigned long start,
++	unsigned long end)
++{
++	flush_tlb_all();
++}
++
++extern inline void flush_tlb_pgtables(struct mm_struct *mm,
++				      unsigned long start, unsigned long end)
++{
++}
++
++#endif /* M68K_CF_TLBFLUSH_H */
+--- /dev/null
++++ b/include/asm-m68k/cf_uaccess.h
+@@ -0,0 +1,376 @@
++#ifndef __M68K_CF_UACCESS_H
++#define __M68K_CF_UACCESS_H
++
++/*
++ * User space memory access functions
++ */
++
++/* The "moves" command is not available in the CF instruction set. */
++#include <linux/compiler.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/sched.h>
++#include <asm/segment.h>
++
++#define VERIFY_READ	0
++#define VERIFY_WRITE	1
++
++/* We let the MMU do all checking */
++#define access_ok(type, addr, size) 1
++
++/*
++ * The exception table consists of pairs of addresses: the first is the
++ * address of an instruction that is allowed to fault, and the second is
++ * the address at which the program should continue.  No registers are
++ * modified, so it is entirely up to the continuation code to figure out
++ * what to do.
++ *
++ * All the routines below use bits of fixup code that are out of line
++ * with the main instruction path.  This means when everything is well,
++ * we don't even have to jump over them.  Further, they do not intrude
++ * on our cache or tlb entries.
++ */
++
++struct exception_table_entry
++{
++	unsigned long insn, fixup;
++};
++
++extern int __put_user_bad(void);
++extern int __get_user_bad(void);
++
++#define __put_user_asm(res, x, ptr, bwl, reg, err)	\
++asm volatile ("\n"					\
++	"1:	move."#bwl"	%2,%1\n"		\
++	"2:\n"						\
++	"	.section .fixup,\"ax\"\n"		\
++	"	.even\n"				\
++	"10:	moveq.l	%3,%0\n"			\
++	"	jra 2b\n"				\
++	"	.previous\n"				\
++	"\n"						\
++	"	.section __ex_table,\"a\"\n"		\
++	"	.align	4\n"				\
++	"	.long	1b,10b\n"			\
++	"	.long	2b,10b\n"			\
++	"	.previous"				\
++	: "+d" (res), "=m" (*(ptr))			\
++	: #reg (x), "i" (err))
++
++/*
++ * These are the main single-value transfer routines.  They automatically
++ * use the right size if we just have the right pointer type.
++ */
++
++#define __put_user(x, ptr)						\
++({									\
++	typeof(*(ptr)) __pu_val = (x);					\
++	int __pu_err = 0;						\
++	__chk_user_ptr(ptr);						\
++	switch (sizeof (*(ptr))) {					\
++	case 1:								\
++		__put_user_asm(__pu_err, __pu_val, ptr, b, d, -EFAULT);	\
++		break;							\
++	case 2:								\
++		__put_user_asm(__pu_err, __pu_val, ptr, w, d, -EFAULT);	\
++		break;							\
++	case 4:								\
++		__put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT);	\
++		break;							\
++	case 8:								\
++		{							\
++		const void __user *__pu_ptr = (ptr);			\
++		asm volatile ("\n"					\
++			"1:	move.l	%2,(%1)+\n"			\
++			"2:	move.l	%R2,(%1)\n"			\
++			"3:\n"						\
++			"	.section .fixup,\"ax\"\n"		\
++			"	.even\n"				\
++			"10:	movel %3,%0\n"				\
++			"	jra 3b\n"				\
++			"	.previous\n"				\
++			"\n"						\
++			"	.section __ex_table,\"a\"\n"		\
++			"	.align 4\n"				\
++			"	.long 1b,10b\n"				\
++			"	.long 2b,10b\n"				\
++			"	.long 3b,10b\n"				\
++			"	.previous"				\
++			: "+d" (__pu_err), "+a" (__pu_ptr)		\
++			: "r" (__pu_val), "i" (-EFAULT)			\
++			: "memory");					\
++		break;							\
++	    }								\
++	default:							\
++		__pu_err = __put_user_bad();				\
++		break;							\
++	}								\
++	__pu_err;							\
++})
++#define put_user(x, ptr)	__put_user(x, ptr)
++
++
++#define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({	\
++	type __gu_val;						\
++	asm volatile ("\n"					\
++		"1:	move."#bwl"	%2,%1\n"		\
++		"2:\n"						\
++		"	.section .fixup,\"ax\"\n"		\
++		"	.even\n"				\
++		"10:	move.l	%3,%0\n"			\
++		"	subl	%1,%1\n"			\
++		"	jra	2b\n"				\
++		"	.previous\n"				\
++		"\n"						\
++		"	.section __ex_table,\"a\"\n"		\
++		"	.align	4\n"				\
++		"	.long	1b,10b\n"			\
++		"	.previous"				\
++		: "+d" (res), "=&" #reg (__gu_val)		\
++		: "m" (*(ptr)), "i" (err));			\
++	(x) = (typeof(*(ptr)))(unsigned long)__gu_val;		\
++})
++
++#define __get_user(x, ptr)						\
++({									\
++	int __gu_err = 0;						\
++	__chk_user_ptr(ptr);						\
++	switch (sizeof(*(ptr))) {					\
++	case 1:								\
++		__get_user_asm(__gu_err, x, ptr, u8, b, d, -EFAULT);	\
++		break;							\
++	case 2:								\
++		__get_user_asm(__gu_err, x, ptr, u16, w, d, -EFAULT);	\
++		break;							\
++	case 4:								\
++		__get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT);	\
++		break;							\
++/*	case 8:	disabled because gcc-4.1 has a broken typeof		\
++		{							\
++		const void *__gu_ptr = (ptr);				\
++		u64 __gu_val;						\
++		asm volatile ("\n"					\
++			"1:	move.l	(%2)+,%1\n"			\
++			"2:	move.l	(%2),%R1\n"			\
++			"3:\n"						\
++			"	.section .fixup,\"ax\"\n"		\
++			"	.even\n"				\
++			"10:	move.l	%3,%0\n"			\
++			"	subl	%1,%1\n"			\
++			"	subl	%R1,%R1\n"			\
++			"	jra	3b\n"				\
++			"	.previous\n"				\
++			"\n"						\
++			"	.section __ex_table,\"a\"\n"		\
++			"	.align	4\n"				\
++			"	.long	1b,10b\n"			\
++			"	.long	2b,10b\n"			\
++			"	.previous"				\
++			: "+d" (__gu_err), "=&r" (__gu_val),		\
++			  "+a" (__gu_ptr)				\
++			: "i" (-EFAULT)					\
++			: "memory");					\
++		(x) = (typeof(*(ptr)))__gu_val;				\
++		break;							\
++	    }	*/							\
++	default:							\
++		__gu_err = __get_user_bad();				\
++		break;							\
++	}								\
++	__gu_err;							\
++})
++#define get_user(x, ptr) __get_user(x, ptr)
++
++unsigned long __generic_copy_from_user(void *to, const void __user *from,
++	unsigned long n);
++unsigned long __generic_copy_to_user(void __user *to, const void *from,
++	unsigned long n);
++
++#define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\
++	asm volatile ("\n"						\
++		"1:	move."#s1"	(%2)+,%3\n"			\
++		"	move."#s1"	%3,(%1)+\n"			\
++		"2:	move."#s2"	(%2)+,%3\n"			\
++		"	move."#s2"	%3,(%1)+\n"			\
++		"	.ifnc	\""#s3"\",\"\"\n"			\
++		"3:	move."#s3"	(%2)+,%3\n"			\
++		"	move."#s3"	%3,(%1)+\n"			\
++		"	.endif\n"					\
++		"4:\n"							\
++		"	.section __ex_table,\"a\"\n"			\
++		"	.align	4\n"					\
++		"	.long	1b,10f\n"				\
++		"	.long	2b,20f\n"				\
++		"	.ifnc	\""#s3"\",\"\"\n"			\
++		"	.long	3b,30f\n"				\
++		"	.endif\n"					\
++		"	.previous\n"					\
++		"\n"							\
++		"	.section .fixup,\"ax\"\n"			\
++		"	.even\n"					\
++		"10:	clr."#s1"	(%1)+\n"			\
++		"20:	clr."#s2"	(%1)+\n"			\
++		"	.ifnc	\""#s3"\",\"\"\n"			\
++		"30:	clr."#s3"	(%1)+\n"			\
++		"	.endif\n"					\
++		"	moveq.l	#"#n",%0\n"				\
++		"	jra	4b\n"					\
++		"	.previous\n"					\
++		: "+d" (res), "+&a" (to), "+a" (from), "=&d" (tmp)	\
++		: : "memory")
++
++static __always_inline unsigned long
++__constant_copy_from_user(void *to, const void __user *from, unsigned long n)
++{
++	unsigned long res = 0, tmp;
++
++	switch (n) {
++	case 1:
++		__get_user_asm(res, *(u8 *)to, (u8 __user *)from, u8, b, d, 1);
++		break;
++	case 2:
++		__get_user_asm(res, *(u16 *)to, (u16 __user *)from, u16, w,
++			d, 2);
++		break;
++	case 3:
++		__constant_copy_from_user_asm(res, to, from, tmp, 3, w, b,);
++		break;
++	case 4:
++		__get_user_asm(res, *(u32 *)to, (u32 __user *)from, u32, l,
++			r, 4);
++		break;
++	case 5:
++		__constant_copy_from_user_asm(res, to, from, tmp, 5, l, b,);
++		break;
++	case 6:
++		__constant_copy_from_user_asm(res, to, from, tmp, 6, l, w,);
++		break;
++	case 7:
++		__constant_copy_from_user_asm(res, to, from, tmp, 7, l, w, b);
++		break;
++	case 8:
++		__constant_copy_from_user_asm(res, to, from, tmp, 8, l, l,);
++		break;
++	case 9:
++		__constant_copy_from_user_asm(res, to, from, tmp, 9, l, l, b);
++		break;
++	case 10:
++		__constant_copy_from_user_asm(res, to, from, tmp, 10, l, l, w);
++		break;
++	case 12:
++		__constant_copy_from_user_asm(res, to, from, tmp, 12, l, l, l);
++		break;
++	default:
++		/* we limit the inlined version to 3 moves */
++		return __generic_copy_from_user(to, from, n);
++	}
++
++	return res;
++}
++
++#define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3)	\
++	asm volatile ("\n"						\
++		"	move."#s1"	(%2)+,%3\n"			\
++		"11:	move."#s1"	%3,(%1)+\n"			\
++		"12:	move."#s2"	(%2)+,%3\n"			\
++		"21:	move."#s2"	%3,(%1)+\n"			\
++		"22:\n"							\
++		"	.ifnc	\""#s3"\",\"\"\n"			\
++		"	move."#s3"	(%2)+,%3\n"			\
++		"31:	move."#s3"	%3,(%1)+\n"			\
++		"32:\n"							\
++		"	.endif\n"					\
++		"4:\n"							\
++		"\n"							\
++		"	.section __ex_table,\"a\"\n"			\
++		"	.align	4\n"					\
++		"	.long	11b,5f\n"				\
++		"	.long	12b,5f\n"				\
++		"	.long	21b,5f\n"				\
++		"	.long	22b,5f\n"				\
++		"	.ifnc	\""#s3"\",\"\"\n"			\
++		"	.long	31b,5f\n"				\
++		"	.long	32b,5f\n"				\
++		"	.endif\n"					\
++		"	.previous\n"					\
++		"\n"							\
++		"	.section .fixup,\"ax\"\n"			\
++		"	.even\n"					\
++		"5:	moveq.l	#"#n",%0\n"				\
++		"	jra	4b\n"					\
++		"	.previous\n"					\
++		: "+d" (res), "+a" (to), "+a" (from), "=&d" (tmp)	\
++		: : "memory")
++
++static __always_inline unsigned long
++__constant_copy_to_user(void __user *to, const void *from, unsigned long n)
++{
++	unsigned long res = 0, tmp;
++
++	switch (n) {
++	case 1:
++		__put_user_asm(res, *(u8 *)from, (u8 __user *)to, b, d, 1);
++		break;
++	case 2:
++		__put_user_asm(res, *(u16 *)from, (u16 __user *)to, w, d, 2);
++		break;
++	case 3:
++		__constant_copy_to_user_asm(res, to, from, tmp, 3, w, b,);
++		break;
++	case 4:
++		__put_user_asm(res, *(u32 *)from, (u32 __user *)to, l, r, 4);
++		break;
++	case 5:
++		__constant_copy_to_user_asm(res, to, from, tmp, 5, l, b,);
++		break;
++	case 6:
++		__constant_copy_to_user_asm(res, to, from, tmp, 6, l, w,);
++		break;
++	case 7:
++		__constant_copy_to_user_asm(res, to, from, tmp, 7, l, w, b);
++		break;
++	case 8:
++		__constant_copy_to_user_asm(res, to, from, tmp, 8, l, l,);
++		break;
++	case 9:
++		__constant_copy_to_user_asm(res, to, from, tmp, 9, l, l, b);
++		break;
++	case 10:
++		__constant_copy_to_user_asm(res, to, from, tmp, 10, l, l, w);
++		break;
++	case 12:
++		__constant_copy_to_user_asm(res, to, from, tmp, 12, l, l, l);
++		break;
++	default:
++		/* limit the inlined version to 3 moves */
++		return __generic_copy_to_user(to, from, n);
++	}
++
++	return res;
++}
++
++#define __copy_from_user(to, from, n)		\
++(__builtin_constant_p(n) ?			\
++ __constant_copy_from_user(to, from, n) :	\
++ __generic_copy_from_user(to, from, n))
++
++#define __copy_to_user(to, from, n)		\
++(__builtin_constant_p(n) ?			\
++ __constant_copy_to_user(to, from, n) :		\
++ __generic_copy_to_user(to, from, n))
++
++#define __copy_to_user_inatomic		__copy_to_user
++#define __copy_from_user_inatomic	__copy_from_user
++
++#define copy_from_user(to, from, n)	__copy_from_user(to, from, n)
++#define copy_to_user(to, from, n)	__copy_to_user(to, from, n)
++
++long strncpy_from_user(char *dst, const char __user *src, long count);
++long strnlen_user(const char __user *src, long n);
++unsigned long __clear_user(void __user *to, unsigned long n);
++
++#define clear_user __clear_user
++
++#define strlen_user(str) strnlen_user(str, 32767)
++
++#endif /* _M68K_CF_UACCESS_H */
+--- /dev/null
++++ b/include/asm-m68k/cfcache.h
+@@ -0,0 +1,86 @@
++/*
++ * include/asm-m68k/cfcache.h
++ */
++#ifndef CF_CFCACHE_H
++#define CF_CFCACHE_H
++
++#define CF_CACR_DEC         (0x80000000) /* Data Cache Enable                */
++#define CF_CACR_DW          (0x40000000) /* Data default Write-protect       */
++#define CF_CACR_DESB        (0x20000000) /* Data Enable Store Buffer         */
++#define CF_CACR_DDPI        (0x10000000) /* Data Disable CPUSHL Invalidate   */
++#define CF_CACR_DHLCK       (0x08000000) /* 1/2 Data Cache Lock Mode         */
++#define CF_CACR_DDCM_00     (0x00000000) /* Cacheable writethrough imprecise */
++#define CF_CACR_DDCM_01     (0x02000000) /* Cacheable copyback               */
++#define CF_CACR_DDCM_10     (0x04000000) /* Noncacheable precise             */
++#define CF_CACR_DDCM_11     (0x06000000) /* Noncacheable imprecise           */
++#define CF_CACR_DCINVA      (0x01000000) /* Data Cache Invalidate All        */
++#define CF_CACR_IVO         (0x00100000) /* Invalidate only                  */
++#define CF_CACR_BEC         (0x00080000) /* Branch Cache Enable              */
++#define CF_CACR_BCINVA      (0x00040000) /* Branch Cache Invalidate All      */
++#define CF_CACR_IEC         (0x00008000) /* Instruction Cache Enable         */
++#define CF_CACR_SPA         (0x00004000) /* Search by Physical Address       */
++#define CF_CACR_DNFB        (0x00002000) /* Default cache-inhibited fill buf */
++#define CF_CACR_IDPI        (0x00001000) /* Instr Disable CPUSHL Invalidate  */
++#define CF_CACR_IHLCK       (0x00000800) /* 1/2 Instruction Cache Lock Mode  */
++#define CF_CACR_IDCM        (0x00000400) /* Noncacheable Instr default mode  */
++#define CF_CACR_ICINVA      (0x00000100) /* Instr Cache Invalidate All       */
++#define CF_CACR_EUSP        (0x00000020) /* Switch stacks in user mode       */
++
++#define DCACHE_LINE_SIZE 0x0010     /* bytes per line        */
++#define DCACHE_WAY_SIZE  0x2000     /* words per cache block */
++#define CACHE_DISABLE_MODE (CF_CACR_DCINVA+CF_CACR_BCINVA+CF_CACR_ICINVA)
++#ifdef CONFIG_M5445X_DISABLE_CACHE
++/* disable cache for testing rev0 silicon */
++#define CACHE_INITIAL_MODE (CF_CACR_EUSP)
++#else
++#define CACHE_INITIAL_MODE (CF_CACR_DEC+CF_CACR_BEC+CF_CACR_IEC+CF_CACR_EUSP)
++#endif
++
++#define _DCACHE_SIZE (2*16384)
++#define _ICACHE_SIZE (2*16384)
++
++#define _SET_SHIFT 4
++
++/*
++ * Masks for cache sizes.  Programming note: because the set size is a
++ * power of two, the mask is also the last address in the set.
++ * This may need to be #ifdef for other Coldfire processors.
++ */
++
++#define _DCACHE_SET_MASK ((_DCACHE_SIZE/64-1)<<_SET_SHIFT)
++#define _ICACHE_SET_MASK ((_ICACHE_SIZE/64-1)<<_SET_SHIFT)
++#define LAST_DCACHE_ADDR _DCACHE_SET_MASK
++#define LAST_ICACHE_ADDR _ICACHE_SET_MASK
++
++
++#ifndef __ASSEMBLY__
++
++extern void DcacheFlushInvalidate(void);
++
++extern void DcacheDisable(void);
++extern void DcacheEnable(void);
++
++/******************************************************************************/
++/*** Unimplemented Cache functionality                                      ***/
++/******************************************************************************/
++#define preDcacheInvalidateBlockMark()
++#define postDcacheInvalidateBlockMark()
++#define DcacheZeroBlock(p, l)           fast_bzero((char *)(p), (long)(l))
++#define loadDcacheInvalidateBlock()     ASSERT(!"Not Implemented on V4e")
++#define IcacheInvalidateBlock()         ASSERT(!"Not Implemented on V4e")
++
++/******************************************************************************/
++/*** Redundant Cache functionality on ColdFire                              ***/
++/******************************************************************************/
++#define DcacheInvalidateBlock(p, l) DcacheFlushInvalidateCacheBlock(p, l)
++#define DcacheFlushCacheBlock(p, l) DcacheFlushInvalidateCacheBlock(p, l)
++#define DcacheFlushBlock(p, l)      DcacheFlushInvalidateCacheBlock(p, l)
++
++extern void DcacheFlushInvalidateCacheBlock(void *start, unsigned long size);
++extern void FLASHDcacheFlushInvalidate(void);
++
++extern void cacr_set(unsigned long x);
++
++#endif /* !__ASSEMBLY__ */
++
++#endif /* CF_CACHE_H */
+--- /dev/null
++++ b/include/asm-m68k/cfmmu.h
+@@ -0,0 +1,104 @@
++/*
++ * Definitions for Coldfire V4e MMU
++ */
++#include <asm/movs.h>
++
++#ifndef __CF_MMU_H__
++#define __CF_MMU_H__
++
++
++#define MMU_BASE 0xE1000000
++
++
++#define MMUCR (MMU_BASE+0x00)
++#define MMUCR_ASMN  1
++#define MMUCR_ASM   (1<<MMUCR_ASMN)
++#define MMUCR_ENN   0
++#define MMUCR_EN    (1<<MMUCR_ENN)
++
++#define MMUOR REG16(MMU_BASE+0x04+0x02)
++#define MMUOR_AAN   16
++#define MMUOR_AA    (0xffff<<MMUOR_AAN)
++#define MMUOR_STLBN 8
++#define MMUOR_STLB  (1<<MMUOR_STLBN)
++#define MMUOR_CAN   7
++#define MMUOR_CA    (1<<MMUOR_CAN)
++#define MMUOR_CNLN  6
++#define MMUOR_CNL   (1<<MMUOR_CNLN)
++#define MMUOR_CASN  5
++#define MMUOR_CAS   (1<<MMUOR_CASN)
++#define MMUOR_ITLBN 4
++#define MMUOR_ITLB  (1<<MMUOR_ITLBN)
++#define MMUOR_ADRN  3
++#define MMUOR_ADR   (1<<MMUOR_ADRN)
++#define MMUOR_RWN   2
++#define MMUOR_RW    (1<<MMUOR_RWN)
++#define MMUOR_ACCN  1
++#define MMUOR_ACC   (1<<MMUOR_ACCN)
++#define MMUOR_UAAN  0
++#define MMUOR_UAA   (1<<MMUOR_UAAN)
++
++#define MMUSR REG32(MMU_BASE+0x08)
++#define MMUSR_SPFN  5
++#define MMUSR_SPF   (1<<MMUSR_SPFN)
++#define MMUSR_RFN   4
++#define MMUSR_RF    (1<<MMUSR_RFN)
++#define MMUSR_WFN   3
++#define MMUSR_WF    (1<<MMUSR_WFN)
++#define MMUSR_HITN  1
++#define MMUSR_HIT   (1<<MMUSR_HITN)
++
++#define MMUAR REG32(MMU_BASE+0x10)
++#define MMUAR_VPN   1
++#define MMUAR_VP    (0xfffffffe)
++#define MMUAR_SN    0
++#define MMUAR_S     (1<<MMUAR_SN)
++
++#define MMUTR REG32(MMU_BASE+0x14)
++#define MMUTR_VAN   10
++#define MMUTR_VA    (0xfffffc00)
++#define MMUTR_IDN   2
++#define MMUTR_ID    (0xff<<MMUTR_IDN)
++#define MMUTR_SGN   1
++#define MMUTR_SG    (1<<MMUTR_SGN)
++#define MMUTR_VN    0
++#define MMUTR_V     (1<<MMUTR_VN)
++
++#define MMUDR REG32(MMU_BASE+0x18)
++#define MMUDR_PAN   10
++#define MMUDR_PA    (0xfffffc00)
++#define MMUDR_SZN   8
++#define MMUDR_SZ_MASK (0x2<<MMUDR_SZN)
++#define MMUDR_SZ1M  (0<<MMUDR_SZN)
++#define MMUDR_SZ4K  (1<<MMUDR_SZN)
++#define MMUDR_SZ8K  (2<<MMUDR_SZN)
++#define MMUDR_SZ16M (3<<MMUDR_SZN)
++#define MMUDR_CMN   6
++#define MMUDR_INC   (2<<MMUDR_CMN)
++#define MMUDR_IC    (0<<MMUDR_CMN)
++#define MMUDR_DWT   (0<<MMUDR_CMN)
++#define MMUDR_DCB   (1<<MMUDR_CMN)
++#define MMUDR_DNCP  (2<<MMUDR_CMN)
++#define MMUDR_DNCIP (3<<MMUDR_CMN)
++#define MMUDR_SPN   5
++#define MMUDR_SP    (1<<MMUDR_SPN)
++#define MMUDR_RN    4
++#define MMUDR_R     (1<<MMUDR_RN)
++#define MMUDR_WN    3
++#define MMUDR_W     (1<<MMUDR_WN)
++#define MMUDR_XN    2
++#define MMUDR_X     (1<<MMUDR_XN)
++#define MMUDR_LKN   1
++#define MMUDR_LK    (1<<MMUDR_LKN)
++
++
++#ifndef __ASSEMBLY__
++#define CF_PMEGS_NUM		256
++#define CF_INVALID_CONTEXT 	255
++#define CF_PAGE_PGNUM_MASK 	(PAGE_MASK)
++
++extern int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb,
++		       int extension_word);
++#endif /* __ASSEMBLY__*/
++
++#endif	/* !__CF_MMU_H__ */
+--- /dev/null
++++ b/include/asm-m68k/coldfire.h
+@@ -0,0 +1,38 @@
++#ifndef _COLDFIRE_H_
++#define _COLDFIRE_H_
++
++#define MCF_MBAR	0x0
++#define MCF_RAMBAR1 	0x40000000
++#define MCF_SRAM	0x80000000
++#define MCF_CLK     	CONFIG_MCFCLK
++#define MCF_BUSCLK	(CONFIG_MCFCLK/2)
++
++#ifdef __ASSEMBLY__
++#define REG32
++#define REG16
++#define REG08
++#else  /* __ASSEMBLY__ */
++#define REG32(x) ((volatile unsigned long  *)(x))
++#define REG16(x) ((volatile unsigned short *)(x))
++#define REG08(x) ((volatile unsigned char  *)(x))
++
++#define MCF_REG32(x) *(volatile unsigned long  *)(MCF_MBAR+(x))
++#define MCF_REG16(x) *(volatile unsigned short *)(MCF_MBAR+(x))
++#define MCF_REG08(x) *(volatile unsigned char  *)(MCF_MBAR+(x))
++
++void cacr_set(unsigned long);
++unsigned long cacr_get(void);
++
++#define coldfire_enable_irq0(irq)	MCF_INTC0_CIMR = (irq);
++
++#define coldfire_enable_irq1(irq)	MCF_INTC1_CIMR = (irq);
++
++#define coldfire_disable_irq0(irq)	MCF_INTC0_SIMR = (irq);
++
++#define coldfire_disable_irq1(irq)	MCF_INTC1_SIMR = (irq);
++
++#define getiprh()			MCF_INTC0_IPRH
++
++#endif /* __ASSEMBLY__ */
++
++#endif  /* _COLDFIRE_H_  */
+--- /dev/null
++++ b/include/asm-m68k/coldfire_edma.h
+@@ -0,0 +1,39 @@
++#ifndef _LINUX_COLDFIRE_DMA_H
++#define _LINUX_COLDFIRE_DMA_H
++
++#include <linux/interrupt.h>
++
++#define EDMA_DRIVER_NAME 		"ColdFire-eDMA"
++#define DMA_DEV_MINOR 			1
++
++#define EDMA_INT_CHANNEL_BASE 		8
++#define EDMA_INT_CONTROLLER_BASE 	64
++#define EDMA_CHANNELS			16
++
++#define EDMA_IRQ_LEVEL			5
++
++typedef irqreturn_t (*edma_irq_handler)(int, void *);
++typedef void (*edma_error_handler)(int, void *);
++
++void set_edma_params(int channel, u32 source, u32 dest,
++	u32 attr, u32 soff, u32 nbytes, u32 slast,
++	u32 citer, u32 biter, u32 doff, u32 dlast_sga);
++
++void start_edma_transfer(int channel, int major_int);
++
++void stop_edma_transfer(int channel);
++
++void confirm_edma_interrupt_handled(int channel);
++
++void init_edma(void);
++
++int  request_edma_channel(int channel,
++			edma_irq_handler handler,
++			edma_error_handler error_handler,
++			void *dev,
++			spinlock_t *lock,
++			const char *device_id);
++
++int free_edma_channel(int channel, void *dev);
++
++#endif
+--- /dev/null
++++ b/include/asm-m68k/mcfqspi.h
+@@ -0,0 +1,50 @@
++/****************************************************************************/
++/*
++ *	mcfqspi.h - Master QSPI controller for the ColdFire processors
++ *
++ *	(C) Copyright 2005, Intec Automation,
++ *			    Mike Lavender (mike@steroidmicros)
++ *
++
++     This program is free software; you can redistribute it and/or modify
++     it under the terms of the GNU General Public License as published by
++     the Free Software Foundation; either version 2 of the License, or
++     (at your option) any later version.
++
++     This program is distributed in the hope that it will be useful,
++     but WITHOUT ANY WARRANTY; without even the implied warranty of
++     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++     GNU General Public License for more details.
++
++     You should have received a copy of the GNU General Public License
++     along with this program; if not, write to the Free Software
++     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
++/* ------------------------------------------------------------------------- */
++
++#ifndef MCFQSPI_H_
++#define MCFQSPI_H_
++
++#define QSPI_CS_INIT     0x01
++#define QSPI_CS_ASSERT	 0x02
++#define QSPI_CS_DROP	 0x04
++
++struct coldfire_spi_master {
++	u16 bus_num;
++	u16 num_chipselect;
++	u8  irq_source;
++	u32 irq_vector;
++	u32 irq_mask;
++	u8  irq_lp;
++	u8  par_val;
++	void (*cs_control)(u8 cs, u8 command);
++};
++
++
++struct coldfire_spi_chip {
++	u8 mode;
++	u8 bits_per_word;
++	u8 del_cs_to_clk;
++	u8 del_after_trans;
++	u16 void_write_data;
++};
++#endif /*MCFQSPI_H_*/
+--- /dev/null
++++ b/include/asm-m68k/mcfsim.h
+@@ -0,0 +1,96 @@
++/*
++ *	mcfsim.h -- ColdFire System Integration Module support.
++ *
++ *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
++ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com)
++ */
++
++#ifndef	mcfsim_h
++#define	mcfsim_h
++
++#if defined(CONFIG_COLDFIRE)
++#include <asm/coldfire.h>
++#endif
++
++#if defined(CONFIG_M54455)
++#include <asm/mcf5445x_intc.h>
++#include <asm/mcf5445x_gpio.h>
++#include <asm/mcf5445x_i2c.h>
++#include <asm/mcf5445x_ccm.h>
++#include <asm/mcf5445x_pci.h>
++#include <asm/mcf5445x_pciarb.h>
++#include <asm/mcf5445x_eport.h>
++#endif
++
++/*
++ *	Define the base address of the SIM within the MBAR address space.
++ */
++#define	MCFSIM_BASE		0x0		/* Base address of SIM */
++
++/*
++ *	Bit definitions for the ICR family of registers.
++ */
++#define	MCFSIM_ICR_AUTOVEC	0x80		/* Auto-vectored intr */
++#define	MCFSIM_ICR_LEVEL0	0x00		/* Level 0 intr */
++#define	MCFSIM_ICR_LEVEL1	0x04		/* Level 1 intr */
++#define	MCFSIM_ICR_LEVEL2	0x08		/* Level 2 intr */
++#define	MCFSIM_ICR_LEVEL3	0x0c		/* Level 3 intr */
++#define	MCFSIM_ICR_LEVEL4	0x10		/* Level 4 intr */
++#define	MCFSIM_ICR_LEVEL5	0x14		/* Level 5 intr */
++#define	MCFSIM_ICR_LEVEL6	0x18		/* Level 6 intr */
++#define	MCFSIM_ICR_LEVEL7	0x1c		/* Level 7 intr */
++
++#define	MCFSIM_ICR_PRI0		0x00		/* Priority 0 intr */
++#define	MCFSIM_ICR_PRI1		0x01		/* Priority 1 intr */
++#define	MCFSIM_ICR_PRI2		0x02		/* Priority 2 intr */
++#define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
++
++/*
++ *	Bit definitions for the Interrupt Mask register (IMR).
++ */
++#define	MCFSIM_IMR_EINT1	0x0002		/* External intr # 1 */
++#define	MCFSIM_IMR_EINT2	0x0004		/* External intr # 2 */
++#define	MCFSIM_IMR_EINT3	0x0008		/* External intr # 3 */
++#define	MCFSIM_IMR_EINT4	0x0010		/* External intr # 4 */
++#define	MCFSIM_IMR_EINT5	0x0020		/* External intr # 5 */
++#define	MCFSIM_IMR_EINT6	0x0040		/* External intr # 6 */
++#define	MCFSIM_IMR_EINT7	0x0080		/* External intr # 7 */
++
++#define	MCFSIM_IMR_SWD		0x0100		/* Software Watchdog intr */
++#define	MCFSIM_IMR_TIMER1	0x0200		/* TIMER 1 intr */
++#define	MCFSIM_IMR_TIMER2	0x0400		/* TIMER 2 intr */
++#define MCFSIM_IMR_MBUS		0x0800		/* MBUS intr	*/
++#define	MCFSIM_IMR_UART1	0x1000		/* UART 1 intr */
++#define	MCFSIM_IMR_UART2	0x2000		/* UART 2 intr */
++
++/*
++ *	Mask for all of the SIM devices. Some parts have more or less
++ *	SIM devices. This is a catchall for the sandard set.
++ */
++#ifndef MCFSIM_IMR_MASKALL
++#define	MCFSIM_IMR_MASKALL	0x3ffe		/* All intr sources */
++#endif
++
++
++/*
++ *	PIT interrupt settings, if not found in mXXXXsim.h file.
++ */
++#ifndef	ICR_INTRCONF
++#define	ICR_INTRCONF		0x2b            /* PIT1 level 5, priority 3 */
++#endif
++#ifndef	MCFPIT_IMR
++#define	MCFPIT_IMR		MCFINTC_IMRH
++#endif
++#ifndef	MCFPIT_IMR_IBIT
++#define	MCFPIT_IMR_IBIT		(1 << (MCFINT_PIT1 - 32))
++#endif
++
++
++#ifndef __ASSEMBLY__
++/*
++ *	Definition for the interrupt auto-vectoring support.
++ */
++extern void	mcf_autovector(unsigned int vec);
++#endif /* __ASSEMBLY__ */
++
++#endif	/* mcfsim_h */
+--- /dev/null
++++ b/include/asm-m68k/mcfuart.h
+@@ -0,0 +1,180 @@
++/*
++ *	mcfuart.h -- ColdFire internal UART support defines.
++ *
++ *	Matt Waddel Matt.Waddel@freescale.com
++ *	Copyright Freescale Semiconductor, Inc. 2007
++ *
++ *	Derived from m68knommu version of this same file (Greg Ungerer & Lineo).
++ *
++ */
++
++#ifndef	mcfuart_h
++#define	mcfuart_h
++
++/*
++ *	Define the base address of the UARTS within the MBAR address
++ *	space.
++ */
++#if defined(CONFIG_M54455)
++#include <asm/mcf5445x_intc.h>
++#define MCFUART_BASE1		0xfc060000	/* Base address of UART1 */
++#define MCFUART_BASE2		0xfc064000	/* Base address of UART2 */
++#define MCFUART_BASE3		0xfc068000	/* Base address of UART3 */
++#define MCFINT_VECBASE		64
++#define MCFINT_UART0		26
++#endif
++
++
++/*
++ *	Define the ColdFire UART register set addresses.
++ */
++#define	MCFUART_UMR		0x00		/* Mode register (r/w) */
++#define	MCFUART_USR		0x04		/* Status register (r) */
++#define	MCFUART_UCSR		0x04		/* Clock Select (w) */
++#define	MCFUART_UCR		0x08		/* Command register (w) */
++#define	MCFUART_URB		0x0c		/* Receiver Buffer (r) */
++#define	MCFUART_UTB		0x0c		/* Transmit Buffer (w) */
++#define	MCFUART_UIPCR		0x10		/* Input Port Change (r) */
++#define	MCFUART_UACR		0x10		/* Auxiliary Control (w) */
++#define	MCFUART_UISR		0x14		/* Interrup Status (r) */
++#define	MCFUART_UIMR		0x14		/* Interrupt Mask (w) */
++#define	MCFUART_UBG1		0x18		/* Baud Rate MSB (r/w) */
++#define	MCFUART_UBG2		0x1c		/* Baud Rate LSB (r/w) */
++#ifdef	CONFIG_M5272
++#define	MCFUART_UTF		0x28		/* Transmitter FIFO (r/w) */
++#define	MCFUART_URF		0x2c		/* Receiver FIFO (r/w) */
++#define	MCFUART_UFPD		0x30		/* Frac Prec. Divider (r/w) */
++#else
++#define	MCFUART_UIVR		0x30		/* Interrupt Vector (r/w) */
++#endif
++#define	MCFUART_UIPR		0x34		/* Input Port (r) */
++#define	MCFUART_UOP1		0x38		/* Output Port Bit Set (w) */
++#define	MCFUART_UOP0		0x3c		/* Output Port Bit Reset (w) */
++
++
++/*
++ *	Define bit flags in Mode Register 1 (MR1).
++ */
++#define	MCFUART_MR1_RXRTS	0x80		/* Auto RTS flow control */
++#define	MCFUART_MR1_RXIRQFULL	0x40		/* RX IRQ type FULL */
++#define	MCFUART_MR1_RXIRQRDY	0x00		/* RX IRQ type RDY */
++#define	MCFUART_MR1_RXERRBLOCK	0x20		/* RX block error mode */
++#define	MCFUART_MR1_RXERRCHAR	0x00		/* RX char error mode */
++
++#define	MCFUART_MR1_PARITYNONE	0x10		/* No parity */
++#define	MCFUART_MR1_PARITYEVEN	0x00		/* Even parity */
++#define	MCFUART_MR1_PARITYODD	0x04		/* Odd parity */
++#define	MCFUART_MR1_PARITYSPACE	0x08		/* Space parity */
++#define	MCFUART_MR1_PARITYMARK	0x0c		/* Mark parity */
++
++#define	MCFUART_MR1_CS5		0x00		/* 5 bits per char */
++#define	MCFUART_MR1_CS6		0x01		/* 6 bits per char */
++#define	MCFUART_MR1_CS7		0x02		/* 7 bits per char */
++#define	MCFUART_MR1_CS8		0x03		/* 8 bits per char */
++
++/*
++ *	Define bit flags in Mode Register 2 (MR2).
++ */
++#define	MCFUART_MR2_LOOPBACK	0x80		/* Loopback mode */
++#define	MCFUART_MR2_REMOTELOOP	0xc0		/* Remote loopback mode */
++#define	MCFUART_MR2_AUTOECHO	0x40		/* Automatic echo */
++#define	MCFUART_MR2_TXRTS	0x20		/* Assert RTS on TX */
++#define	MCFUART_MR2_TXCTS	0x10		/* Auto CTS flow control */
++
++#define	MCFUART_MR2_STOP1	0x07		/* 1 stop bit */
++#define	MCFUART_MR2_STOP15	0x08		/* 1.5 stop bits */
++#define	MCFUART_MR2_STOP2	0x0f		/* 2 stop bits */
++
++/*
++ *	Define bit flags in Status Register (USR).
++ */
++#define	MCFUART_USR_RXBREAK	0x80		/* Received BREAK */
++#define	MCFUART_USR_RXFRAMING	0x40		/* Received framing error */
++#define	MCFUART_USR_RXPARITY	0x20		/* Received parity error */
++#define	MCFUART_USR_RXOVERRUN	0x10		/* Received overrun error */
++#define	MCFUART_USR_TXEMPTY	0x08		/* Transmitter empty */
++#define	MCFUART_USR_TXREADY	0x04		/* Transmitter ready */
++#define	MCFUART_USR_RXFULL	0x02		/* Receiver full */
++#define	MCFUART_USR_RXREADY	0x01		/* Receiver ready */
++
++#define	MCFUART_USR_RXERR	(MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
++				MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
++
++/*
++ *	Define bit flags in Clock Select Register (UCSR).
++ */
++#define	MCFUART_UCSR_RXCLKTIMER	0xd0		/* RX clock is timer */
++#define	MCFUART_UCSR_RXCLKEXT16	0xe0		/* RX clock is external x16 */
++#define	MCFUART_UCSR_RXCLKEXT1	0xf0		/* RX clock is external x1 */
++
++#define	MCFUART_UCSR_TXCLKTIMER	0x0d		/* TX clock is timer */
++#define	MCFUART_UCSR_TXCLKEXT16	0x0e		/* TX clock is external x16 */
++#define	MCFUART_UCSR_TXCLKEXT1	0x0f		/* TX clock is external x1 */
++
++/*
++ *	Define bit flags in Command Register (UCR).
++ */
++#define	MCFUART_UCR_CMDNULL		0x00	/* No command */
++#define	MCFUART_UCR_CMDRESETMRPTR	0x10	/* Reset MR pointer */
++#define	MCFUART_UCR_CMDRESETRX		0x20	/* Reset receiver */
++#define	MCFUART_UCR_CMDRESETTX		0x30	/* Reset transmitter */
++#define	MCFUART_UCR_CMDRESETERR		0x40	/* Reset error status */
++#define	MCFUART_UCR_CMDRESETBREAK	0x50	/* Reset BREAK change */
++#define	MCFUART_UCR_CMDBREAKSTART	0x60	/* Start BREAK */
++#define	MCFUART_UCR_CMDBREAKSTOP	0x70	/* Stop BREAK */
++
++#define	MCFUART_UCR_TXNULL	0x00		/* No TX command */
++#define	MCFUART_UCR_TXENABLE	0x04		/* Enable TX */
++#define	MCFUART_UCR_TXDISABLE	0x08		/* Disable TX */
++#define	MCFUART_UCR_RXNULL	0x00		/* No RX command */
++#define	MCFUART_UCR_RXENABLE	0x01		/* Enable RX */
++#define	MCFUART_UCR_RXDISABLE	0x02		/* Disable RX */
++
++/*
++ *	Define bit flags in Input Port Change Register (UIPCR).
++ */
++#define	MCFUART_UIPCR_CTSCOS	0x10		/* CTS change of state */
++#define	MCFUART_UIPCR_CTS	0x01		/* CTS value */
++
++/*
++ *	Define bit flags in Input Port Register (UIP).
++ */
++#define	MCFUART_UIPR_CTS	0x01		/* CTS value */
++
++/*
++ *	Define bit flags in Output Port Registers (UOP).
++ *	Clear bit by writing to UOP0, set by writing to UOP1.
++ */
++#define	MCFUART_UOP_RTS		0x01		/* RTS set or clear */
++
++/*
++ *	Define bit flags in the Auxiliary Control Register (UACR).
++ */
++#define	MCFUART_UACR_IEC	0x01		/* Input enable control */
++
++/*
++ *	Define bit flags in Interrupt Status Register (UISR).
++ *	These same bits are used for the Interrupt Mask Register (UIMR).
++ */
++#define	MCFUART_UIR_COS		0x80		/* Change of state (CTS) */
++#define	MCFUART_UIR_DELTABREAK	0x04		/* Break start or stop */
++#define	MCFUART_UIR_RXREADY	0x02		/* Receiver ready */
++#define	MCFUART_UIR_TXREADY	0x01		/* Transmitter ready */
++
++#ifdef	CONFIG_M5272
++/*
++ *	Define bit flags in the Transmitter FIFO Register (UTF).
++ */
++#define	MCFUART_UTF_TXB		0x1f		/* Transmitter data level */
++#define	MCFUART_UTF_FULL	0x20		/* Transmitter fifo full */
++#define	MCFUART_UTF_TXS		0xc0		/* Transmitter status */
++
++/*
++ *	Define bit flags in the Receiver FIFO Register (URF).
++ */
++#define	MCFUART_URF_RXB		0x1f		/* Receiver data level */
++#define	MCFUART_URF_FULL	0x20		/* Receiver fifo full */
++#define	MCFUART_URF_RXS		0xc0		/* Receiver status */
++#endif
++
++#endif	/* mcfuart_h */
diff --git a/target/linux/coldfire/patches/004-m5445x_headers.patch b/target/linux/coldfire/patches/004-m5445x_headers.patch
new file mode 100644
index 0000000000..3a72bf65d0
--- /dev/null
+++ b/target/linux/coldfire/patches/004-m5445x_headers.patch
@@ -0,0 +1,5136 @@
+From fa0f89c9cf9ceecc3feac1d96914c8e91f98d90f Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 31 Oct 2007 16:43:01 -0600
+Subject: [PATCH] Add MCF5445x Specific Header Files.
+
+LTIBName: m5445x-headers
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ include/asm-m68k/mcf5445x_ccm.h    |  161 ++++
+ include/asm-m68k/mcf5445x_dspi.h   |  402 ++++++++++
+ include/asm-m68k/mcf5445x_dtim.h   |   87 +++
+ include/asm-m68k/mcf5445x_edma.h   | 1458 ++++++++++++++++++++++++++++++++++++
+ include/asm-m68k/mcf5445x_eport.h  |  117 +++
+ include/asm-m68k/mcf5445x_fbcs.h   |  182 +++++
+ include/asm-m68k/mcf5445x_gpio.h   | 1257 +++++++++++++++++++++++++++++++
+ include/asm-m68k/mcf5445x_i2c.h    |   39 +
+ include/asm-m68k/mcf5445x_intc.h   |  724 ++++++++++++++++++
+ include/asm-m68k/mcf5445x_pci.h    |  238 ++++++
+ include/asm-m68k/mcf5445x_pciarb.h |   40 +
+ include/asm-m68k/mcf5445x_sdramc.h |  115 +++
+ include/asm-m68k/mcf5445x_ssi.h    |  187 +++++
+ include/asm-m68k/mcf5445x_usb.h    |   49 ++
+ 14 files changed, 5056 insertions(+), 0 deletions(-)
+ create mode 100644 include/asm-m68k/mcf5445x_ccm.h
+ create mode 100644 include/asm-m68k/mcf5445x_dspi.h
+ create mode 100644 include/asm-m68k/mcf5445x_dtim.h
+ create mode 100644 include/asm-m68k/mcf5445x_edma.h
+ create mode 100644 include/asm-m68k/mcf5445x_eport.h
+ create mode 100644 include/asm-m68k/mcf5445x_fbcs.h
+ create mode 100644 include/asm-m68k/mcf5445x_gpio.h
+ create mode 100644 include/asm-m68k/mcf5445x_i2c.h
+ create mode 100644 include/asm-m68k/mcf5445x_intc.h
+ create mode 100644 include/asm-m68k/mcf5445x_pci.h
+ create mode 100644 include/asm-m68k/mcf5445x_pciarb.h
+ create mode 100644 include/asm-m68k/mcf5445x_sdramc.h
+ create mode 100644 include/asm-m68k/mcf5445x_ssi.h
+ create mode 100644 include/asm-m68k/mcf5445x_usb.h
+
+--- /dev/null
++++ b/include/asm-m68k/mcf5445x_ccm.h
+@@ -0,0 +1,161 @@
++/*
++ * Matt Waddel Matt.Waddel@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __MCF5445X_CCM_H__
++#define __MCF5445X_CCM_H__
++
++/*********************************************************************
++*
++* Chip Configuration Module (CCM)
++*
++*********************************************************************/
++
++/* Register read/write macros */
++#define MCF_CCM_CCR	MCF_REG16(0xFC0A0004)	/* Chip Configuration Register (Read-only) (256 or 360 TEPBGA) */
++#define MCF_CCM_RCON	MCF_REG16(0xFC0A0008)	/* Reset Configuration (Read-only) (256 or 360 TEPBGA) */
++#define MCF_CCM_CIR	MCF_REG16(0xFC0A000A)	/* Chip Identification Register (Read-only) */
++#define MCF_CCM_MISCCR	MCF_REG16(0xFC0A0010)	/* Miscellaneous Control Register */
++#define MCF_CCM_CDR	MCF_REG16(0xFC0A0012)	/* Clock Divider Register */
++#define MCF_CCM_UOCSR	MCF_REG16(0xFC0A0014)	/* USB On-the-Go Controller Status Register */
++#define MCF_CCM_SBFSR	MCF_REG16(0xFC0A0018)	/* Serial Boot Facility Status Register (Read Only) */
++#define MCF_CCM_SBFCR	MCF_REG16(0xFC0A0020)	/* Serial Boot Facility Control Register */
++
++/* Bit definitions and macros for CCR_360 */
++#define MCF_CCM_CCR_360_PLLMULT2(x)         (((x) & 0x0003))	/* 2-Bit PLL clock mode */
++#define MCF_CCM_CCR_360_PCISLEW             (0x0004)		/* PCI pad slew rate mode */
++#define MCF_CCM_CCR_360_PCIMODE             (0x0008)		/* PCI host/agent mode */
++#define MCF_CCM_CCR_360_PLLMODE             (0x0010)		/* PLL Mode */
++#define MCF_CCM_CCR_360_FBCONFIG(x)         (((x) & 0x0007) << 5)  /* Flexbus/PCI port size configuration */
++#define MCF_CCM_CCR_360_PLLMULT3(x)         (((x) & 0x0007))	/* 3-Bit PLL Clock Mode */
++#define MCF_CCM_CCR_360_OSCMODE             (0x0008)		/* Oscillator Clock Mode */
++#define MCF_CCM_CCR_360_FBCONFIG_MASK       (0x00E0)
++#define MCF_CCM_CCR_360_PLLMULT2_MASK       (0x0003)
++#define MCF_CCM_CCR_360_PLLMULT3_MASK       (0x0007)
++#define MCF_CCM_CCR_360_FBCONFIG_NM_NP_32   (0x0000)
++#define MCF_CCM_CCR_360_FBCONFIG_NM_NP_8    (0x0020)
++#define MCF_CCM_CCR_360_FBCONFIG_NM_NP_16   (0x0040)
++#define MCF_CCM_CCR_360_FBCONFIG_M_P_16     (0x0060)
++#define MCF_CCM_CCR_360_FBCONFIG_M_NP_32    (0x0080)
++#define MCF_CCM_CCR_360_FBCONFIG_M_NP_8     (0x00A0)
++#define MCF_CCM_CCR_360_FBCONFIG_M_NP_16    (0x00C0)
++#define MCF_CCM_CCR_360_FBCONFIG_M_P_8      (0x00E0)
++#define MCF_CCM_CCR_360_PLLMULT2_12X        (0x0000)
++#define MCF_CCM_CCR_360_PLLMULT2_6X         (0x0001)
++#define MCF_CCM_CCR_360_PLLMULT2_16X        (0x0002)
++#define MCF_CCM_CCR_360_PLLMULT2_8X         (0x0003)
++#define MCF_CCM_CCR_360_PLLMULT3_20X        (0x0000)
++#define MCF_CCM_CCR_360_PLLMULT3_10X        (0x0001)
++#define MCF_CCM_CCR_360_PLLMULT3_24X        (0x0002)
++#define MCF_CCM_CCR_360_PLLMULT3_18X        (0x0003)
++#define MCF_CCM_CCR_360_PLLMULT3_12X        (0x0004)
++#define MCF_CCM_CCR_360_PLLMULT3_6X         (0x0005)
++#define MCF_CCM_CCR_360_PLLMULT3_16X        (0x0006)
++#define MCF_CCM_CCR_360_PLLMULT3_8X         (0x0007)
++
++/* Bit definitions and macros for CCR_256 */
++#define MCF_CCM_CCR_256_PLLMULT3(x)         (((x) & 0x0007))  /* 3-Bit PLL clock mode */
++#define MCF_CCM_CCR_256_OSCMODE             (0x0008)	      /* Oscillator clock mode */
++#define MCF_CCM_CCR_256_PLLMODE             (0x0010)	      /* PLL Mode */
++#define MCF_CCM_CCR_256_FBCONFIG(x)         (((x) & 0x0007) << 5)  /* Flexbus/PCI port size configuration */
++#define MCF_CCM_CCR_256_FBCONFIG_MASK       (0x00E0)
++#define MCF_CCM_CCR_256_FBCONFIG_NM_32      (0x0000)
++#define MCF_CCM_CCR_256_FBCONFIG_NM_8       (0x0020)
++#define MCF_CCM_CCR_256_FBCONFIG_NM_16      (0x0040)
++#define MCF_CCM_CCR_256_FBCONFIG_M_32       (0x0080)
++#define MCF_CCM_CCR_256_FBCONFIG_M_8        (0x00A0)
++#define MCF_CCM_CCR_256_FBCONFIG_M_16       (0x00C0)
++#define MCF_CCM_CCR_256_PLLMULT3_MASK       (0x0007)
++#define MCF_CCM_CCR_256_PLLMULT3_20X        (0x0000)
++#define MCF_CCM_CCR_256_PLLMULT3_10X        (0x0001)
++#define MCF_CCM_CCR_256_PLLMULT3_24X        (0x0002)
++#define MCF_CCM_CCR_256_PLLMULT3_18X        (0x0003)
++#define MCF_CCM_CCR_256_PLLMULT3_12X        (0x0004)
++#define MCF_CCM_CCR_256_PLLMULT3_6X         (0x0005)
++#define MCF_CCM_CCR_256_PLLMULT3_16X        (0x0006)
++#define MCF_CCM_CCR_256_PLLMULT3_8X         (0x0007)
++
++/* Bit definitions and macros for RCON_360 */
++#define MCF_CCM_RCON_360_PLLMULT(x)     (((x)&0x0003))	/* PLL clock mode */
++#define MCF_CCM_RCON_360_PCISLEW        (0x0004)	/* PCI pad slew rate mode */
++#define MCF_CCM_RCON_360_PCIMODE        (0x0008)	/* PCI host/agent mode */
++#define MCF_CCM_RCON_360_PLLMODE        (0x0010)	/* PLL Mode */
++#define MCF_CCM_RCON_360_FBCONFIG(x)    (((x) & 0x0007) << 5)	/* Flexbus/PCI port size configuration */
++
++/* Bit definitions and macros for RCON_256 */
++#define MCF_CCM_RCON_256_PLLMULT(x)     (((x) & 0x0007)) /* PLL clock mode */
++#define MCF_CCM_RCON_256_OSCMODE        (0x0008)	/* Oscillator clock mode */
++#define MCF_CCM_RCON_256_PLLMODE        (0x0010)	/* PLL Mode */
++#define MCF_CCM_RCON_256_FBCONFIG(x)    (((x) & 0x0007) << 5)	/* Flexbus/PCI port size configuration */
++
++/* Bit definitions and macros for CIR */
++#define MCF_CCM_CIR_PRN(x)          (((x) & 0x003F))	/* Part revision number */
++#define MCF_CCM_CIR_PIN(x)          (((x) & 0x03FF) << 6)	/* Part identification number */
++#define MCF_CCM_CIR_PIN_MASK        (0xFFC0)
++#define MCF_CCM_CIR_PRN_MASK        (0x003F)
++#define MCF_CCM_CIR_PIN_MCF54450    (0x4F << 6)
++#define MCF_CCM_CIR_PIN_MCF54451    (0x4D << 6)
++#define MCF_CCM_CIR_PIN_MCF54452    (0x4B << 6)
++#define MCF_CCM_CIR_PIN_MCF54453    (0x49 << 6)
++#define MCF_CCM_CIR_PIN_MCF54454    (0x4A << 6)
++#define MCF_CCM_CIR_PIN_MCF54455    (0x48 << 6)
++
++/* Bit definitions and macros for MISCCR */
++#define MCF_CCM_MISCCR_USBSRC           (0x0001)	/* USB clock source */
++#define MCF_CCM_MISCCR_USBOC            (0x0002)	/* USB VBUS over-current sense polarity */
++#define MCF_CCM_MISCCR_USBPUE           (0x0004)	/* USB transceiver pull-up enable */
++#define MCF_CCM_MISCCR_SSISRC           (0x0010)	/* SSI clock source */
++#define MCF_CCM_MISCCR_TIMDMA           (0x0020)	/* Timer DMA mux selection */
++#define MCF_CCM_MISCCR_SSIPUS           (0x0040)	/* SSI RXD/TXD pull select */
++#define MCF_CCM_MISCCR_SSIPUE           (0x0080)	/* SSI RXD/TXD pull enable */
++#define MCF_CCM_MISCCR_BMT(x)           (((x) & 0x0007) << 8)	/* Bus monitor timing field */
++#define MCF_CCM_MISCCR_BME              (0x0800)	/* Bus monitor external enable bit */
++#define MCF_CCM_MISCCR_LIMP             (0x1000)	/* Limp mode enable */
++#define MCF_CCM_MISCCR_BMT_65536        (0)
++#define MCF_CCM_MISCCR_BMT_32768        (1)
++#define MCF_CCM_MISCCR_BMT_16384        (2)
++#define MCF_CCM_MISCCR_BMT_8192         (3)
++#define MCF_CCM_MISCCR_BMT_4096         (4)
++#define MCF_CCM_MISCCR_BMT_2048         (5)
++#define MCF_CCM_MISCCR_BMT_1024         (6)
++#define MCF_CCM_MISCCR_BMT_512          (7)
++#define MCF_CCM_MISCCR_SSIPUS_UP        (1)
++#define MCF_CCM_MISCCR_SSIPUS_DOWN      (0)
++#define MCF_CCM_MISCCR_TIMDMA_TIM       (1)
++#define MCF_CCM_MISCCR_TIMDMA_SSI       (0)
++#define MCF_CCM_MISCCR_SSISRC_CLKIN     (0)
++#define MCF_CCM_MISCCR_SSISRC_PLL       (1)
++#define MCF_CCM_MISCCR_USBOC_ACTHI      (0)
++#define MCF_CCM_MISCCR_USBOV_ACTLO      (1)
++#define MCF_CCM_MISCCR_USBSRC_CLKIN     (0)
++#define MCF_CCM_MISCCR_USBSRC_PLL       (1)
++
++/* Bit definitions and macros for CDR */
++#define MCF_CCM_CDR_SSIDIV(x)   (((x) & 0x00FF))	/* SSI oversampling clock divider */
++#define MCF_CCM_CDR_LPDIV(x)    (((x) & 0x000F) << 8)	/* Low power clock divider */
++
++/* Bit definitions and macros for UOCSR */
++#define MCF_CCM_UOCSR_XPDE          (0x0001)	/* On-chip transceiver pull-down enable */
++#define MCF_CCM_UOCSR_UOMIE         (0x0002)	/* USB OTG misc interrupt enable */
++#define MCF_CCM_UOCSR_WKUP          (0x0004)	/* USB OTG controller wake-up event */
++#define MCF_CCM_UOCSR_PWRFLT        (0x0008)	/* VBUS power fault */
++#define MCF_CCM_UOCSR_SEND          (0x0010)	/* Session end */
++#define MCF_CCM_UOCSR_VVLD          (0x0020)	/* VBUS valid indicator */
++#define MCF_CCM_UOCSR_BVLD          (0x0040)	/* B-peripheral valid indicator */
++#define MCF_CCM_UOCSR_AVLD          (0x0080)	/* A-peripheral valid indicator */
++#define MCF_CCM_UOCSR_DPPU          (0x0100)	/* D+ pull-up for FS enabled (read-only) */
++#define MCF_CCM_UOCSR_DCR_VBUS      (0x0200)	/* VBUS discharge resistor enabled (read-only) */
++#define MCF_CCM_UOCSR_CRG_VBUS      (0x0400)	/* VBUS charge resistor enabled (read-only) */
++#define MCF_CCM_UOCSR_DMPD          (0x1000)	/* D- 15Kohm pull-down (read-only) */
++#define MCF_CCM_UOCSR_DPPD          (0x2000)	/* D+ 15Kohm pull-down (read-only) */
++
++/********************************************************************/
++
++#endif /* __MCF5445X_CCM_H__ */
+--- /dev/null
++++ b/include/asm-m68k/mcf5445x_dspi.h
+@@ -0,0 +1,402 @@
++/*
++ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __MCF5445X_DSPI_H__
++#define __MCF5445X_DSPI_H__
++
++/*********************************************************************
++*
++* DMA Serial Peripheral Interface (DSPI)
++*
++*********************************************************************/
++
++/* Register read/write macros */
++#define MCF_DSPI_DMCR           MCF_REG32(0xFC05C000)   /* DSPI Module Configuration Register */
++#define MCF_DSPI_DTCR           MCF_REG32(0xFC05C008)   /* DSPI Transfer Count Register */
++#define MCF_DSPI_DCTAR0         MCF_REG32(0xFC05C00C)   /* DSPI Clock and Transfer Attributes Register */
++#define MCF_DSPI_DCTAR1         MCF_REG32(0xFC05C010)   /* DSPI Clock and Transfer Attributes Register */
++#define MCF_DSPI_DCTAR2         MCF_REG32(0xFC05C014)   /* DSPI Clock and Transfer Attributes Register */
++#define MCF_DSPI_DCTAR3         MCF_REG32(0xFC05C018)   /* DSPI Clock and Transfer Attributes Register */
++#define MCF_DSPI_DCTAR4         MCF_REG32(0xFC05C01C)   /* DSPI Clock and Transfer Attributes Register */
++#define MCF_DSPI_DCTAR5         MCF_REG32(0xFC05C020)   /* DSPI Clock and Transfer Attributes Register */
++#define MCF_DSPI_DCTAR6         MCF_REG32(0xFC05C024)   /* DSPI Clock and Transfer Attributes Register */
++#define MCF_DSPI_DCTAR7         MCF_REG32(0xFC05C028)   /* DSPI Clock and Transfer Attributes Register */
++#define MCF_DSPI_DSR            MCF_REG32(0xFC05C02C)   /* DSPI Status Register */
++#define MCF_DSPI_DRSER          MCF_REG32(0xFC05C030)   /* DSPI DMA/Interrupt Request Select and Enable Register */
++#define MCF_DSPI_DTFR           MCF_REG32(0xFC05C034)   /* DSPI Transmit FIFO Register */
++#define MCF_DSPI_DRFR           MCF_REG32(0xFC05C038)   /* DSPI Receive FIFO Register */
++#define MCF_DSPI_DTFDR0         MCF_REG32(0xFC05C03C)   /* DSPI Transmit FIFO Debugging Registers */
++#define MCF_DSPI_DTFDR1         MCF_REG32(0xFC05C040)   /* DSPI Transmit FIFO Debugging Registers */
++#define MCF_DSPI_DTFDR2         MCF_REG32(0xFC05C044)   /* DSPI Transmit FIFO Debugging Registers */
++#define MCF_DSPI_DTFDR3         MCF_REG32(0xFC05C048)   /* DSPI Transmit FIFO Debugging Registers */
++#define MCF_DSPI_DRFDR0         MCF_REG32(0xFC05C07C)   /* DSPI Receive FIFO Debugging Registers */
++#define MCF_DSPI_DRFDR1         MCF_REG32(0xFC05C080)   /* DSPI Receive FIFO Debugging Registers */
++#define MCF_DSPI_DRFDR2         MCF_REG32(0xFC05C084)   /* DSPI Receive FIFO Debugging Registers */
++#define MCF_DSPI_DRFDR3         MCF_REG32(0xFC05C088)   /* DSPI Receive FIFO Debugging Registers */
++
++/* Parameterized register read/write macros for multiple registers */
++#define MCF_DSPI_DCTAR(x)       MCF_REG32(0xFC05C00C+((x)*0x004))	/* DSPI Clock and Transfer Attributes Register */
++#define MCF_DSPI_DTFDR(x)       MCF_REG32(0xFC05C03C+((x)*0x004))	/* DSPI Transmit FIFO Debugging Registers */
++#define MCF_DSPI_DRFDR(x)       MCF_REG32(0xFC05C07C+((x)*0x004))	/* DSPI Receive FIFO Debugging Registers */
++
++/* Bit definitions and macros for DMCR */
++#define MCF_DSPI_DMCR_HALT          (0x00000001)            /* Halt -- stops and starts DSPI transfers */
++#define MCF_DSPI_DMCR_SMPLPT(x)     (((x)&0x00000003)<<8)   /* Sample point selection */
++#define MCF_DSPI_DMCR_CLRRXF        (0x00000400)            /* Clear receive FIFO */
++#define MCF_DSPI_DMCR_CLRTXF        (0x00000800)            /* Clear transmit FIFO */
++#define MCF_DSPI_DMCR_DISRXF        (0x00001000)            /* Disable receive FIFO */
++#define MCF_DSPI_DMCR_DISTXF        (0x00002000)            /* Disable transmit FIFO */
++#define MCF_DSPI_DMCR_MDIS          (0x00004000)            /* Module Disable */
++#define MCF_DSPI_DMCR_PCSIS0        (0x00010000)            /* Peripheral chip-select 0 inactive state */
++#define MCF_DSPI_DMCR_PCSIS1        (0x00020000)            /* Peripheral chip-select 1 inactive state */
++#define MCF_DSPI_DMCR_PCSIS2        (0x00040000)            /* Peripheral chip-select 2 inactive state */
++#define MCF_DSPI_DMCR_PCSIS3        (0x00080000)            /* Peripheral chip-select 3 inactive state */
++#define MCF_DSPI_DMCR_PCSIS4        (0x00100000)            /* Peripheral chip-select 4 inactive state */
++#define MCF_DSPI_DMCR_PCSIS5        (0x00200000)            /* Peripheral chip-select 5 inactive state */
++#define MCF_DSPI_DMCR_PCSIS6        (0x00400000)            /* Peripheral chip-select 6 inactive state */
++#define MCF_DSPI_DMCR_PCSIS7        (0x00800000)            /* Peripheral chip-select 7 inactive state */
++#define MCF_DSPI_DMCR_ROOE          (0x01000000)            /* Receive FIFO overflow overwrite enable */
++#define MCF_DSPI_DMCR_PCSSE         (0x02000000)            /* Peripheral chip select strobe enable */
++#define MCF_DSPI_DMCR_MTFE          (0x04000000)            /* Modified timing format enable */
++#define MCF_DSPI_DMCR_FRZ           (0x08000000)            /* Freeze */
++#define MCF_DSPI_DMCR_DCONF(x)      (((x)&0x00000003)<<28)  /* DSPI configuration */
++#define MCF_DSPI_DMCR_CONT_SCKE     (0x40000000)            /* Continuous SCK enable */
++#define MCF_DSPI_DMCR_MSTR          (0x80000000)            /* Master/Slave mode select */
++#define MCF_DSPI_DMCR_DCONF_SPI     (0x00000000)
++#define MCF_DSPI_DMCR_PCSIS7_LOW    (0x00000000)
++#define MCF_DSPI_DMCR_PCSIS7_HIGH   (0x00800000)
++#define MCF_DSPI_DMCR_PCSIS6_LOW    (0x00000000)
++#define MCF_DSPI_DMCR_PCSIS6_HIGH   (0x00400000)
++#define MCF_DSPI_DMCR_PCSIS5_LOW    (0x00000000)
++#define MCF_DSPI_DMCR_PCSIS5_HIGH   (0x00200000)
++#define MCF_DSPI_DMCR_PCSIS4_LOW    (0x00000000)
++#define MCF_DSPI_DMCR_PCSIS4_HIGH   (0x00100000)
++#define MCF_DSPI_DMCR_PCSIS3_LOW    (0x00000000)
++#define MCF_DSPI_DMCR_PCSIS3_HIGH   (0x00080000)
++#define MCF_DSPI_DMCR_PCSIS2_LOW    (0x00000000)
++#define MCF_DSPI_DMCR_PCSIS2_HIGH   (0x00040000)
++#define MCF_DSPI_DMCR_PCSIS1_LOW    (0x00000000)
++#define MCF_DSPI_DMCR_PCSIS1_HIGH   (0x00020000)
++#define MCF_DSPI_DMCR_PCSIS0_LOW    (0x00000000)
++#define MCF_DSPI_DMCR_PCSIS0_HIGH   (0x00010000)
++
++/* Bit definitions and macros for DTCR */
++#define MCF_DSPI_DTCR_SPI_TCNT(x)   (((x)&0x0000FFFF)<<16)  /* SPI transfer count */
++
++/* Bit definitions and macros for DCTAR group */
++#define MCF_DSPI_DCTAR_BR(x)                (((x)&0x0000000F))      /* Baud rate scaler */
++#define MCF_DSPI_DCTAR_DT(x)                (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
++#define MCF_DSPI_DCTAR_ASC(x)               (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
++#define MCF_DSPI_DCTAR_CSSCK(x)             (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
++#define MCF_DSPI_DCTAR_PBR(x)               (((x)&0x00000003)<<16)  /* Baud rate prescaler */
++#define MCF_DSPI_DCTAR_PDT(x)               (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
++#define MCF_DSPI_DCTAR_PASC(x)              (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
++#define MCF_DSPI_DCTAR_PCSSCK(x)            (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
++#define MCF_DSPI_DCTAR_LSBFE                (0x01000000)            /* LSB first enable */
++#define MCF_DSPI_DCTAR_CPHA                 (0x02000000)            /* Clock phase */
++#define MCF_DSPI_DCTAR_CPOL                 (0x04000000)            /* Clock polarity */
++#define MCF_DSPI_DCTAR_FMSZ(x)              (((x)&0x0000000F)<<27)  /* Frame size */
++#define MCF_DSPI_DCTAR_DBR                  (0x80000000)            /* Double baud rate */
++#define MCF_DSPI_DCTAR_CPOL_LOW             (0x00000000)
++#define MCF_DSPI_DCTAR_CPOL_HIGH            (0x04000000)
++#define MCF_DSPI_DCTAR_CPHA_LATCH_RISING    (0x00000000)
++#define MCF_DSPI_DCTAR_CPHA_LATCH_FALLING   (0x02000000)
++#define MCF_DSPI_DCTAR_PCSSCK_1CLK          (0x00000000)
++#define MCF_DSPI_DCTAR_PCSSCK_3CLK          (0x00400000)
++#define MCF_DSPI_DCTAR_PCSSCK_5CLK          (0x00800000)
++#define MCF_DSPI_DCTAR_PCSSCK_7CLK          (0x00C00000)
++#define MCF_DSPI_DCTAR_PASC_1CLK            (0x00000000)
++#define MCF_DSPI_DCTAR_PASC_3CLK            (0x00100000)
++#define MCF_DSPI_DCTAR_PASC_5CLK            (0x00200000)
++#define MCF_DSPI_DCTAR_PASC_7CLK            (0x00300000)
++#define MCF_DSPI_DCTAR_PDT_1CLK             (0x00000000)
++#define MCF_DSPI_DCTAR_PDT_3CLK             (0x00040000)
++#define MCF_DSPI_DCTAR_PDT_5CLK             (0x00080000)
++#define MCF_DSPI_DCTAR_PDT_7CLK             (0x000C0000)
++#define MCF_DSPI_DCTAR_PBR_2CLK             (0x00000000)
++#define MCF_DSPI_DCTAR_PBR_3CLK             (0x00010000)
++#define MCF_DSPI_DCTAR_PBR_5CLK             (0x00020000)
++#define MCF_DSPI_DCTAR_PBR_7CLK             (0x00030000)
++
++/* Bit definitions and macros for DCTAR0 */
++#define MCF_DSPI_DCTAR0_BR(x)                   (((x)&0x0000000F))      /* Baud rate scaler */
++#define MCF_DSPI_DCTAR0_DT(x)                   (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
++#define MCF_DSPI_DCTAR0_ASC(x)                  (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
++#define MCF_DSPI_DCTAR0_CSSCK(x)                (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
++#define MCF_DSPI_DCTAR0_PBR(x)                  (((x)&0x00000003)<<16)  /* Baud rate prescaler */
++#define MCF_DSPI_DCTAR0_PDT(x)                  (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
++#define MCF_DSPI_DCTAR0_PASC(x)                 (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
++#define MCF_DSPI_DCTAR0_PCSSCK(x)               (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
++#define MCF_DSPI_DCTAR0_LSBFE                   (0x01000000)            /* LSB first enable */
++#define MCF_DSPI_DCTAR0_CPHA                    (0x02000000)            /* Clock phase */
++#define MCF_DSPI_DCTAR0_CPOL                    (0x04000000)            /* Clock polarity */
++#define MCF_DSPI_DCTAR0_FMSZ(x)                 (((x)&0x0000000F)<<27)  /* Frame size */
++#define MCF_DSPI_DCTAR0_DBR                     (0x80000000)            /* Double baud rate */
++#define MCF_DSPI_DCTAR0_CPOL_LOW                (0x00000000)
++#define MCF_DSPI_DCTAR0_CPOL_HIGH               (0x04000000)
++#define MCF_DSPI_DCTAR0_CPHA_LATCH_RISING       (0x00000000)
++#define MCF_DSPI_DCTAR0_CPHA_LATCH_FALLING      (0x02000000)
++#define MCF_DSPI_DCTAR0_PCSSCK_1CLK             (0x00000000)
++#define MCF_DSPI_DCTAR0_PCSSCK_3CLK             (0x00400000)
++#define MCF_DSPI_DCTAR0_PCSSCK_5CLK             (0x00800000)
++#define MCF_DSPI_DCTAR0_PCSSCK_7CLK             (0x00C00000)
++#define MCF_DSPI_DCTAR0_PASC_1CLK               (0x00000000)
++#define MCF_DSPI_DCTAR0_PASC_3CLK               (0x00100000)
++#define MCF_DSPI_DCTAR0_PASC_5CLK               (0x00200000)
++#define MCF_DSPI_DCTAR0_PASC_7CLK               (0x00300000)
++#define MCF_DSPI_DCTAR0_PDT_1CLK                (0x00000000)
++#define MCF_DSPI_DCTAR0_PDT_3CLK                (0x00040000)
++#define MCF_DSPI_DCTAR0_PDT_5CLK                (0x00080000)
++#define MCF_DSPI_DCTAR0_PDT_7CLK                (0x000C0000)
++#define MCF_DSPI_DCTAR0_PBR_2CLK                (0x00000000)
++#define MCF_DSPI_DCTAR0_PBR_3CLK                (0x00010000)
++#define MCF_DSPI_DCTAR0_PBR_5CLK                (0x00020000)
++#define MCF_DSPI_DCTAR0_PBR_7CLK                (0x00030000)
++
++/* Bit definitions and macros for DCTAR1 */
++#define MCF_DSPI_DCTAR1_BR(x)       (((x)&0x0000000F))      /* Baud rate scaler */
++#define MCF_DSPI_DCTAR1_DT(x)       (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
++#define MCF_DSPI_DCTAR1_ASC(x)      (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
++#define MCF_DSPI_DCTAR1_CSSCK(x)    (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
++#define MCF_DSPI_DCTAR1_PBR(x)      (((x)&0x00000003)<<16)  /* Baud rate prescaler */
++#define MCF_DSPI_DCTAR1_PDT(x)      (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
++#define MCF_DSPI_DCTAR1_PASC(x)     (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
++#define MCF_DSPI_DCTAR1_PCSSCK(x)   (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
++#define MCF_DSPI_DCTAR1_LSBFE       (0x01000000)            /* LSB first enable */
++#define MCF_DSPI_DCTAR1_CPHA        (0x02000000)            /* Clock phase */
++#define MCF_DSPI_DCTAR1_CPOL        (0x04000000)            /* Clock polarity */
++#define MCF_DSPI_DCTAR1_FMSZ(x)     (((x)&0x0000000F)<<27)  /* Frame size */
++#define MCF_DSPI_DCTAR1_DBR         (0x80000000)            /* Double baud rate */
++
++/* Bit definitions and macros for DCTAR2 */
++#define MCF_DSPI_DCTAR2_BR(x)       (((x)&0x0000000F))      /* Baud rate scaler */
++#define MCF_DSPI_DCTAR2_DT(x)       (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
++#define MCF_DSPI_DCTAR2_ASC(x)      (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
++#define MCF_DSPI_DCTAR2_CSSCK(x)    (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
++#define MCF_DSPI_DCTAR2_PBR(x)      (((x)&0x00000003)<<16)  /* Baud rate prescaler */
++#define MCF_DSPI_DCTAR2_PDT(x)      (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
++#define MCF_DSPI_DCTAR2_PASC(x)     (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
++#define MCF_DSPI_DCTAR2_PCSSCK(x)   (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
++#define MCF_DSPI_DCTAR2_LSBFE       (0x01000000)            /* LSB first enable */
++#define MCF_DSPI_DCTAR2_CPHA        (0x02000000)            /* Clock phase */
++#define MCF_DSPI_DCTAR2_CPOL        (0x04000000)            /* Clock polarity */
++#define MCF_DSPI_DCTAR2_FMSZ(x)     (((x)&0x0000000F)<<27)  /* Frame size */
++#define MCF_DSPI_DCTAR2_DBR         (0x80000000)            /* Double baud rate */
++
++/* Bit definitions and macros for DCTAR3 */
++#define MCF_DSPI_DCTAR3_BR(x)       (((x)&0x0000000F))      /* Baud rate scaler */
++#define MCF_DSPI_DCTAR3_DT(x)       (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
++#define MCF_DSPI_DCTAR3_ASC(x)      (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
++#define MCF_DSPI_DCTAR3_CSSCK(x)    (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
++#define MCF_DSPI_DCTAR3_PBR(x)      (((x)&0x00000003)<<16)  /* Baud rate prescaler */
++#define MCF_DSPI_DCTAR3_PDT(x)      (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
++#define MCF_DSPI_DCTAR3_PASC(x)     (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
++#define MCF_DSPI_DCTAR3_PCSSCK(x)   (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
++#define MCF_DSPI_DCTAR3_LSBFE       (0x01000000)            /* LSB first enable */
++#define MCF_DSPI_DCTAR3_CPHA        (0x02000000)            /* Clock phase */
++#define MCF_DSPI_DCTAR3_CPOL        (0x04000000)            /* Clock polarity */
++#define MCF_DSPI_DCTAR3_FMSZ(x)     (((x)&0x0000000F)<<27)  /* Frame size */
++#define MCF_DSPI_DCTAR3_DBR         (0x80000000)            /* Double baud rate */
++
++/* Bit definitions and macros for DCTAR4 */
++#define MCF_DSPI_DCTAR4_BR(x)       (((x)&0x0000000F))      /* Baud rate scaler */
++#define MCF_DSPI_DCTAR4_DT(x)       (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
++#define MCF_DSPI_DCTAR4_ASC(x)      (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
++#define MCF_DSPI_DCTAR4_CSSCK(x)    (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
++#define MCF_DSPI_DCTAR4_PBR(x)      (((x)&0x00000003)<<16)  /* Baud rate prescaler */
++#define MCF_DSPI_DCTAR4_PDT(x)      (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
++#define MCF_DSPI_DCTAR4_PASC(x)     (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
++#define MCF_DSPI_DCTAR4_PCSSCK(x)   (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
++#define MCF_DSPI_DCTAR4_LSBFE       (0x01000000)            /* LSB first enable */
++#define MCF_DSPI_DCTAR4_CPHA        (0x02000000)            /* Clock phase */
++#define MCF_DSPI_DCTAR4_CPOL        (0x04000000)            /* Clock polarity */
++#define MCF_DSPI_DCTAR4_FMSZ(x)     (((x)&0x0000000F)<<27)  /* Frame size */
++#define MCF_DSPI_DCTAR4_DBR         (0x80000000)            /* Double baud rate */
++
++/* Bit definitions and macros for DCTAR5 */
++#define MCF_DSPI_DCTAR5_BR(x)       (((x)&0x0000000F))      /* Baud rate scaler */
++#define MCF_DSPI_DCTAR5_DT(x)       (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
++#define MCF_DSPI_DCTAR5_ASC(x)      (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
++#define MCF_DSPI_DCTAR5_CSSCK(x)    (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
++#define MCF_DSPI_DCTAR5_PBR(x)      (((x)&0x00000003)<<16)  /* Baud rate prescaler */
++#define MCF_DSPI_DCTAR5_PDT(x)      (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
++#define MCF_DSPI_DCTAR5_PASC(x)     (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
++#define MCF_DSPI_DCTAR5_PCSSCK(x)   (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
++#define MCF_DSPI_DCTAR5_LSBFE       (0x01000000)            /* LSB first enable */
++#define MCF_DSPI_DCTAR5_CPHA        (0x02000000)            /* Clock phase */
++#define MCF_DSPI_DCTAR5_CPOL        (0x04000000)            /* Clock polarity */
++#define MCF_DSPI_DCTAR5_FMSZ(x)     (((x)&0x0000000F)<<27)  /* Frame size */
++#define MCF_DSPI_DCTAR5_DBR         (0x80000000)            /* Double baud rate */
++
++/* Bit definitions and macros for DCTAR6 */
++#define MCF_DSPI_DCTAR6_BR(x)       (((x)&0x0000000F))      /* Baud rate scaler */
++#define MCF_DSPI_DCTAR6_DT(x)       (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
++#define MCF_DSPI_DCTAR6_ASC(x)      (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
++#define MCF_DSPI_DCTAR6_CSSCK(x)    (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
++#define MCF_DSPI_DCTAR6_PBR(x)      (((x)&0x00000003)<<16)  /* Baud rate prescaler */
++#define MCF_DSPI_DCTAR6_PDT(x)      (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
++#define MCF_DSPI_DCTAR6_PASC(x)     (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
++#define MCF_DSPI_DCTAR6_PCSSCK(x)   (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
++#define MCF_DSPI_DCTAR6_LSBFE       (0x01000000)            /* LSB first enable */
++#define MCF_DSPI_DCTAR6_CPHA        (0x02000000)            /* Clock phase */
++#define MCF_DSPI_DCTAR6_CPOL        (0x04000000)            /* Clock polarity */
++#define MCF_DSPI_DCTAR6_FMSZ(x)     (((x)&0x0000000F)<<27)  /* Frame size */
++#define MCF_DSPI_DCTAR6_DBR         (0x80000000)            /* Double baud rate */
++
++/* Bit definitions and macros for DCTAR7 */
++#define MCF_DSPI_DCTAR7_BR(x)       (((x)&0x0000000F))      /* Baud rate scaler */
++#define MCF_DSPI_DCTAR7_DT(x)       (((x)&0x0000000F)<<4)   /* Delay after transfer scaler */
++#define MCF_DSPI_DCTAR7_ASC(x)      (((x)&0x0000000F)<<8)   /* After SCK delay scaler */
++#define MCF_DSPI_DCTAR7_CSSCK(x)    (((x)&0x0000000F)<<12)  /* PCS to SCK delay scaler */
++#define MCF_DSPI_DCTAR7_PBR(x)      (((x)&0x00000003)<<16)  /* Baud rate prescaler */
++#define MCF_DSPI_DCTAR7_PDT(x)      (((x)&0x00000003)<<18)  /* Delay after transfer prescaler */
++#define MCF_DSPI_DCTAR7_PASC(x)     (((x)&0x00000003)<<20)  /* After SCK delay prescaler */
++#define MCF_DSPI_DCTAR7_PCSSCK(x)   (((x)&0x00000003)<<22)  /* PCS to SCK delay prescaler */
++#define MCF_DSPI_DCTAR7_LSBFE       (0x01000000)            /* LSB first enable */
++#define MCF_DSPI_DCTAR7_CPHA        (0x02000000)            /* Clock phase */
++#define MCF_DSPI_DCTAR7_CPOL        (0x04000000)            /* Clock polarity */
++#define MCF_DSPI_DCTAR7_FMSZ(x)     (((x)&0x0000000F)<<27)  /* Frame size */
++#define MCF_DSPI_DCTAR7_DBR         (0x80000000)            /* Double baud rate */
++
++/* Bit definitions and macros for DSR */
++#define MCF_DSPI_DSR_RXPTR(x)   (((x)&0x0000000F))      /* Receive next pointer */
++#define MCF_DSPI_DSR_RXCTR(x)   (((x)&0x0000000F)<<4)   /* Receive FIFO counter */
++#define MCF_DSPI_DSR_TXPTR(x)   (((x)&0x0000000F)<<8)   /* Transmit next pointer */
++#define MCF_DSPI_DSR_TXCTR(x)   (((x)&0x0000000F)<<12)  /* Transmit FIFO counter */
++#define MCF_DSPI_DSR_RFDF       (0x00020000)            /* Receive FIFO drain flag */
++#define MCF_DSPI_DSR_RFOF       (0x00080000)            /* Receive FIFO overflow flag */
++#define MCF_DSPI_DSR_TFFF       (0x02000000)            /* Transmit FIFO fill flag */
++#define MCF_DSPI_DSR_TFUF       (0x08000000)            /* Transmit FIFO underflow flag */
++#define MCF_DSPI_DSR_EOQF       (0x10000000)            /* End of queue flag */
++#define MCF_DSPI_DSR_TXRXS      (0x40000000)            /* Tx and Rx status (enabled | disabled) */
++#define MCF_DSPI_DSR_TCF        (0x80000000)            /* Transfer complete flag */
++
++/* Bit definitions and macros for DRSER */
++#define MCF_DSPI_DRSER_RFDFS    (0x00010000)    /* Receive FIFO drain DMA or interrupt select */
++#define MCF_DSPI_DRSER_RFDFE    (0x00020000)    /* Receive FIFO drain request enable */
++#define MCF_DSPI_DRSER_RFOFE    (0x00080000)    /* Receive FIFO overflow request enable */
++#define MCF_DSPI_DRSER_TFFFS    (0x01000000)    /* Transmit FIFO fill DMA or interrupt select */
++#define MCF_DSPI_DRSER_TFFFE    (0x02000000)    /* Transmit FIFO fill request enable */
++#define MCF_DSPI_DRSER_TFUFE    (0x08000000)    /* Transmit FIFO underflow request enable */
++#define MCF_DSPI_DRSER_EOQFE    (0x10000000)    /* DSPI finished request enable */
++#define MCF_DSPI_DRSER_TCFE     (0x80000000)    /* Transmission complete request enable */
++
++/* Bit definitions and macros for DTFR */
++#define MCF_DSPI_DTFR_TXDATA(x)     (((x)&0x0000FFFF))      /* Transmit data */
++#define MCF_DSPI_DTFR_PCS0          (0x00010000)            /* Peripheral chip select 0 */
++#define MCF_DSPI_DTFR_PCS1          (0x00020000)            /* Peripheral chip select 1 */
++#define MCF_DSPI_DTFR_PCS2          (0x00040000)            /* Peripheral chip select 2 */
++#define MCF_DSPI_DTFR_PCS3          (0x00080000)            /* Peripheral chip select 3 */
++#define MCF_DSPI_DTFR_PCS4          (0x00100000)            /* Peripheral chip select 4 */
++#define MCF_DSPI_DTFR_PCS5          (0x00200000)            /* Peripheral chip select 5 */
++#define MCF_DSPI_DTFR_PCS6          (0x00400000)            /* Peripheral chip select 6 */
++#define MCF_DSPI_DTFR_PCS7          (0x00800000)            /* Peripheral chip select 7 */
++#define MCF_DSPI_DTFR_CTCNT         (0x04000000)            /* Clear SPI transfer counter */
++#define MCF_DSPI_DTFR_EOQ           (0x08000000)            /* End of queue */
++#define MCF_DSPI_DTFR_CTAS(x)       (((x)&0x00000007)<<28)  /* Clock and transfer attributes select */
++#define MCF_DSPI_DTFR_CONT          (0x80000000)            /* Continuous peripheral chip-select enable */
++
++/* Bit definitions and macros for DRFR */
++#define MCF_DSPI_DRFR_RXDATA(x)     (((x)&0x0000FFFF))  /* Receive data */
++
++/* Bit definitions and macros for DTFDR group */
++#define MCF_DSPI_DTFDR_TXDATA(x)    (((x)&0x0000FFFF))      /* Transmit data */
++#define MCF_DSPI_DTFDR_PCS0         (0x00010000)            /* Peripheral chip select 0 */
++#define MCF_DSPI_DTFDR_PCS1         (0x00020000)            /* Peripheral chip select 1 */
++#define MCF_DSPI_DTFDR_PCS2         (0x00040000)            /* Peripheral chip select 2 */
++#define MCF_DSPI_DTFDR_PCS3         (0x00080000)            /* Peripheral chip select 3 */
++#define MCF_DSPI_DTFDR_PCS4         (0x00100000)            /* Peripheral chip select 4 */
++#define MCF_DSPI_DTFDR_PCS5         (0x00200000)            /* Peripheral chip select 5 */
++#define MCF_DSPI_DTFDR_PCS6         (0x00400000)            /* Peripheral chip select 6 */
++#define MCF_DSPI_DTFDR_PCS7         (0x00800000)            /* Peripheral chip select 7 */
++#define MCF_DSPI_DTFDR_CTCNT        (0x04000000)            /* Clear SPI transfer counter */
++#define MCF_DSPI_DTFDR_EOQ          (0x08000000)            /* End of queue */
++#define MCF_DSPI_DTFDR_CTAS(x)      (((x)&0x00000007)<<28)  /* Clock and transfer attributes select */
++#define MCF_DSPI_DTFDR_CONT         (0x80000000)            /* Continuous peripheral chip-select enable */
++
++/* Bit definitions and macros for DTFDR0 */
++#define MCF_DSPI_DTFDR0_TXDATA(x)   (((x)&0x0000FFFF))      /* Transmit data */
++#define MCF_DSPI_DTFDR0_PCS0        (0x00010000)            /* Peripheral chip select 0 */
++#define MCF_DSPI_DTFDR0_PCS1        (0x00020000)            /* Peripheral chip select 1 */
++#define MCF_DSPI_DTFDR0_PCS2        (0x00040000)            /* Peripheral chip select 2 */
++#define MCF_DSPI_DTFDR0_PCS3        (0x00080000)            /* Peripheral chip select 3 */
++#define MCF_DSPI_DTFDR0_PCS4        (0x00100000)            /* Peripheral chip select 4 */
++#define MCF_DSPI_DTFDR0_PCS5        (0x00200000)            /* Peripheral chip select 5 */
++#define MCF_DSPI_DTFDR0_PCS6        (0x00400000)            /* Peripheral chip select 6 */
++#define MCF_DSPI_DTFDR0_PCS7        (0x00800000)            /* Peripheral chip select 7 */
++#define MCF_DSPI_DTFDR0_CTCNT       (0x04000000)            /* Clear SPI transfer counter */
++#define MCF_DSPI_DTFDR0_EOQ         (0x08000000)            /* End of queue */
++#define MCF_DSPI_DTFDR0_CTAS(x)     (((x)&0x00000007)<<28)  /* Clock and transfer attributes select */
++#define MCF_DSPI_DTFDR0_CONT        (0x80000000)            /* Continuous peripheral chip-select enable */
++
++/* Bit definitions and macros for DTFDR1 */
++#define MCF_DSPI_DTFDR1_TXDATA(x)   (((x)&0x0000FFFF))      /* Transmit data */
++#define MCF_DSPI_DTFDR1_PCS0        (0x00010000)            /* Peripheral chip select 0 */
++#define MCF_DSPI_DTFDR1_PCS1        (0x00020000)            /* Peripheral chip select 1 */
++#define MCF_DSPI_DTFDR1_PCS2        (0x00040000)            /* Peripheral chip select 2 */
++#define MCF_DSPI_DTFDR1_PCS3        (0x00080000)            /* Peripheral chip select 3 */
++#define MCF_DSPI_DTFDR1_PCS4        (0x00100000)            /* Peripheral chip select 4 */
++#define MCF_DSPI_DTFDR1_PCS5        (0x00200000)            /* Peripheral chip select 5 */
++#define MCF_DSPI_DTFDR1_PCS6        (0x00400000)            /* Peripheral chip select 6 */
++#define MCF_DSPI_DTFDR1_PCS7        (0x00800000)            /* Peripheral chip select 7 */
++#define MCF_DSPI_DTFDR1_CTCNT       (0x04000000)            /* Clear SPI transfer counter */
++#define MCF_DSPI_DTFDR1_EOQ         (0x08000000)            /* End of queue */
++#define MCF_DSPI_DTFDR1_CTAS(x)     (((x)&0x00000007)<<28)  /* Clock and transfer attributes select */
++#define MCF_DSPI_DTFDR1_CONT        (0x80000000)            /* Continuous peripheral chip-select enable */
++
++/* Bit definitions and macros for DTFDR2 */
++#define MCF_DSPI_DTFDR2_TXDATA(x)   (((x)&0x0000FFFF))      /* Transmit data */
++#define MCF_DSPI_DTFDR2_PCS0        (0x00010000)            /* Peripheral chip select 0 */
++#define MCF_DSPI_DTFDR2_PCS1        (0x00020000)            /* Peripheral chip select 1 */
++#define MCF_DSPI_DTFDR2_PCS2        (0x00040000)            /* Peripheral chip select 2 */
++#define MCF_DSPI_DTFDR2_PCS3        (0x00080000)            /* Peripheral chip select 3 */
++#define MCF_DSPI_DTFDR2_PCS4        (0x00100000)            /* Peripheral chip select 4 */
++#define MCF_DSPI_DTFDR2_PCS5        (0x00200000)            /* Peripheral chip select 5 */
++#define MCF_DSPI_DTFDR2_PCS6        (0x00400000)            /* Peripheral chip select 6 */
++#define MCF_DSPI_DTFDR2_PCS7        (0x00800000)            /* Peripheral chip select 7 */
++#define MCF_DSPI_DTFDR2_CTCNT       (0x04000000)            /* Clear SPI transfer counter */
++#define MCF_DSPI_DTFDR2_EOQ         (0x08000000)            /* End of queue */
++#define MCF_DSPI_DTFDR2_CTAS(x)     (((x)&0x00000007)<<28)  /* Clock and transfer attributes select */
++#define MCF_DSPI_DTFDR2_CONT        (0x80000000)            /* Continuous peripheral chip-select enable */
++
++/* Bit definitions and macros for DTFDR3 */
++#define MCF_DSPI_DTFDR3_TXDATA(x)   (((x)&0x0000FFFF))      /* Transmit data */
++#define MCF_DSPI_DTFDR3_PCS0        (0x00010000)            /* Peripheral chip select 0 */
++#define MCF_DSPI_DTFDR3_PCS1        (0x00020000)            /* Peripheral chip select 1 */
++#define MCF_DSPI_DTFDR3_PCS2        (0x00040000)            /* Peripheral chip select 2 */
++#define MCF_DSPI_DTFDR3_PCS3        (0x00080000)            /* Peripheral chip select 3 */
++#define MCF_DSPI_DTFDR3_PCS4        (0x00100000)            /* Peripheral chip select 4 */
++#define MCF_DSPI_DTFDR3_PCS5        (0x00200000)            /* Peripheral chip select 5 */
++#define MCF_DSPI_DTFDR3_PCS6        (0x00400000)            /* Peripheral chip select 6 */
++#define MCF_DSPI_DTFDR3_PCS7        (0x00800000)            /* Peripheral chip select 7 */
++#define MCF_DSPI_DTFDR3_CTCNT       (0x04000000)            /* Clear SPI transfer counter */
++#define MCF_DSPI_DTFDR3_EOQ         (0x08000000)            /* End of queue */
++#define MCF_DSPI_DTFDR3_CTAS(x)     (((x)&0x00000007)<<28)  /* Clock and transfer attributes select */
++#define MCF_DSPI_DTFDR3_CONT        (0x80000000)            /* Continuous peripheral chip-select enable */
++
++/* Bit definitions and macros for DRFDR group */
++#define MCF_DSPI_DRFDR_RXDATA(x)    (((x)&0x0000FFFF))  /* Receive data */
++
++/* Bit definitions and macros for DRFDR0 */
++#define MCF_DSPI_DRFDR0_RXDATA(x)   (((x)&0x0000FFFF))  /* Receive data */
++
++/* Bit definitions and macros for DRFDR1 */
++#define MCF_DSPI_DRFDR1_RXDATA(x)   (((x)&0x0000FFFF))  /* Receive data */
++
++/* Bit definitions and macros for DRFDR2 */
++#define MCF_DSPI_DRFDR2_RXDATA(x)   (((x)&0x0000FFFF))  /* Receive data */
++
++/* Bit definitions and macros for DRFDR3 */
++#define MCF_DSPI_DRFDR3_RXDATA(x)   (((x)&0x0000FFFF))  /* Receive data */
++
++/********************************************************************/
++
++#endif /* __MCF5445X_DSPI_H__ */
+--- /dev/null
++++ b/include/asm-m68k/mcf5445x_dtim.h
+@@ -0,0 +1,87 @@
++/*
++ * Matt Waddel Matt.Waddel@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __MCF5445X_DTIM_H__
++#define __MCF5445X_DTIM_H__
++
++/*********************************************************************
++*
++* DMA Timers (DTIM)
++*
++*********************************************************************/
++/* Register read/write macros */
++#define MCF_DTIM0_DTMR	0xFC070000	/* DMA Timer Mode Register */
++#define MCF_DTIM0_DTXMR	0xFC070002	/* DMA Timer Extended Mode Register */
++#define MCF_DTIM0_DTER	0xFC070003	/* DMA Timer Event Register */
++#define MCF_DTIM0_DTRR	0xFC070004	/* DMA Timer Reference Register */
++#define MCF_DTIM0_DTCR	0xFC070008	/* DMA Timer Capture Register */
++#define MCF_DTIM0_DTCN	0xFC07000C	/* DMA Timer Counter Register */
++#define MCF_DTIM1_DTMR	0xFC074000	/* DMA Timer Mode Register */
++#define MCF_DTIM1_DTXMR	0xFC074002	/* DMA Timer Extended Mode Register */
++#define MCF_DTIM1_DTER	0xFC074003	/* DMA Timer Event Register */
++#define MCF_DTIM1_DTRR	0xFC074004	/* DMA Timer Reference Register */
++#define MCF_DTIM1_DTCR	0xFC074008	/* DMA Timer Capture Register */
++#define MCF_DTIM1_DTCN	0xFC07400C	/* DMA Timer Counter Register */
++#define MCF_DTIM2_DTMR	0xFC078000	/* DMA Timer Mode Register */
++#define MCF_DTIM2_DTXMR	0xFC078002	/* DMA Timer Extended Mode Register */
++#define MCF_DTIM2_DTER	0xFC078003	/* DMA Timer Event Register */
++#define MCF_DTIM2_DTRR	0xFC078004	/* DMA Timer Reference Register */
++#define MCF_DTIM2_DTCR	0xFC078008	/* DMA Timer Capture Register */
++#define MCF_DTIM2_DTCN	0xFC07800C	/* DMA Timer Counter Register */
++#define MCF_DTIM3_DTMR	0xFC07C000	/* DMA Timer Mode Register */
++#define MCF_DTIM3_DTXMR	0xFC07C002	/* DMA Timer Extended Mode Register */
++#define MCF_DTIM3_DTER	0xFC07C003	/* DMA Timer Event Register */
++#define MCF_DTIM3_DTRR	0xFC07C004	/* DMA Timer Reference Register */
++#define MCF_DTIM3_DTCR	0xFC07C008	/* DMA Timer Capture Register */
++#define MCF_DTIM3_DTCN	0xFC07C00C	/* DMA Timer Counter Register */
++
++/* Parameterized register read/write macros for multiple modules */
++#define MCF_DTIM_DTMR(x)	0xFC070000+((x)*0x4000)  /* DMA Timer Mode Register */
++#define MCF_DTIM_DTXMR(x)	0xFC070002+((x)*0x4000)  /* DMA Timer Extended Mode Register */
++#define MCF_DTIM_DTER(x)	0xFC070003+((x)*0x4000)  /* DMA Timer Event Register */
++#define MCF_DTIM_DTRR(x)	0xFC070004+((x)*0x4000)  /* DMA Timer Reference Register */
++#define MCF_DTIM_DTCR(x)	0xFC070008+((x)*0x4000)  /* DMA Timer Capture Register */
++#define MCF_DTIM_DTCN(x)	0xFC07000C+((x)*0x4000)  /* DMA Timer Counter Register */
++
++/* Bit definitions and macros for DTMR */
++#define MCF_DTIM_DTMR_RST	(0x0001)		/* Reset */
++#define MCF_DTIM_DTMR_CLK(x)	(((x)&0x0003)<<1)	/* Input clock source */
++#define MCF_DTIM_DTMR_FRR	(0x0008)		/* Free run/restart */
++#define MCF_DTIM_DTMR_ORRI	(0x0010)		/* Output reference request/interrupt enable */
++#define MCF_DTIM_DTMR_OM	(0x0020)		/* Output Mode */
++#define MCF_DTIM_DTMR_CE(x)	(((x)&0x0003)<<6)	/* Capture Edge */
++#define MCF_DTIM_DTMR_PS(x)	(((x)&0x00FF)<<8)	/* Prescaler value */
++#define MCF_DTIM_DTMR_RST_EN	(0x0001)
++#define MCF_DTIM_DTMR_RST_RST	(0x0000)
++#define MCF_DTIM_DTMR_CE_ANY	(0x00C0)
++#define MCF_DTIM_DTMR_CE_FALL	(0x0080)
++#define MCF_DTIM_DTMR_CE_RISE	(0x0040)
++#define MCF_DTIM_DTMR_CE_NONE	(0x0000)
++#define MCF_DTIM_DTMR_CLK_DTIN	(0x0006)
++#define MCF_DTIM_DTMR_CLK_DIV16	(0x0004)
++#define MCF_DTIM_DTMR_CLK_DIV1	(0x0002)
++#define MCF_DTIM_DTMR_CLK_STOP	(0x0000)
++
++/* Bit definitions and macros for DTXMR */
++#define MCF_DTIM_DTXMR_MODE16	(0x01)	/* Increment Mode */
++#define MCF_DTIM_DTXMR_DMAEN	(0x80)	/* DMA request */
++
++/* Bit definitions and macros for DTER */
++#define MCF_DTIM_DTER_CAP	(0x01)	/* Capture event */
++#define MCF_DTIM_DTER_REF	(0x02)	/* Output reference event */
++
++/* Interrupts used for system timers */
++#define MCFSIM_ICR_TIMER1       (0xFC048040+32)
++#define MCFSIM_ICR_TIMER2       (0xFC048040+33)
++
++/********************************************************************/
++
++#endif /* __MCF5445X_DTIM_H__ */
+--- /dev/null
++++ b/include/asm-m68k/mcf5445x_edma.h
+@@ -0,0 +1,1458 @@
++/*
++ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++#ifndef __MCF5445X_EDMA_H__
++#define __MCF5445X_EDMA_H__
++
++/*********************************************************************
++*
++* Enhanced DMA (EDMA)
++*
++*********************************************************************/
++
++/* Register read/write macros */
++#define MCF_EDMA_CR                     MCF_REG32(0xFC044000)
++#define MCF_EDMA_ES                     MCF_REG32(0xFC044004)
++#define MCF_EDMA_ERQ                    MCF_REG16(0xFC04400E)
++#define MCF_EDMA_EEI                    MCF_REG16(0xFC044016)
++#define MCF_EDMA_SERQ                   MCF_REG08(0xFC044018)
++#define MCF_EDMA_CERQ                   MCF_REG08(0xFC044019)
++#define MCF_EDMA_SEEI                   MCF_REG08(0xFC04401A)
++#define MCF_EDMA_CEEI                   MCF_REG08(0xFC04401B)
++#define MCF_EDMA_CINT                   MCF_REG08(0xFC04401C)
++#define MCF_EDMA_CERR                   MCF_REG08(0xFC04401D)
++#define MCF_EDMA_SSRT                   MCF_REG08(0xFC04401E)
++#define MCF_EDMA_CDNE                   MCF_REG08(0xFC04401F)
++#define MCF_EDMA_INTR                   MCF_REG16(0xFC044026)
++#define MCF_EDMA_ERR                    MCF_REG16(0xFC04402E)
++#define MCF_EDMA_DCHPRI0                MCF_REG08(0xFC044100)
++#define MCF_EDMA_DCHPRI1                MCF_REG08(0xFC044101)
++#define MCF_EDMA_DCHPRI2                MCF_REG08(0xFC044102)
++#define MCF_EDMA_DCHPRI3                MCF_REG08(0xFC044103)
++#define MCF_EDMA_DCHPRI4                MCF_REG08(0xFC044104)
++#define MCF_EDMA_DCHPRI5                MCF_REG08(0xFC044105)
++#define MCF_EDMA_DCHPRI6                MCF_REG08(0xFC044106)
++#define MCF_EDMA_DCHPRI7                MCF_REG08(0xFC044107)
++#define MCF_EDMA_DCHPRI8                MCF_REG08(0xFC044108)
++#define MCF_EDMA_DCHPRI9                MCF_REG08(0xFC044109)
++#define MCF_EDMA_DCHPRI10               MCF_REG08(0xFC04410A)
++#define MCF_EDMA_DCHPRI11               MCF_REG08(0xFC04410B)
++#define MCF_EDMA_DCHPRI12               MCF_REG08(0xFC04410C)
++#define MCF_EDMA_DCHPRI13               MCF_REG08(0xFC04410D)
++#define MCF_EDMA_DCHPRI14               MCF_REG08(0xFC04410E)
++#define MCF_EDMA_DCHPRI15               MCF_REG08(0xFC04410F)
++#define MCF_EDMA_TCD0_SADDR             MCF_REG32(0xFC045000)
++#define MCF_EDMA_TCD0_ATTR              MCF_REG16(0xFC045004)
++#define MCF_EDMA_TCD0_SOFF              MCF_REG16(0xFC045006)
++#define MCF_EDMA_TCD0_NBYTES            MCF_REG32(0xFC045008)
++#define MCF_EDMA_TCD0_SLAST             MCF_REG32(0xFC04500C)
++#define MCF_EDMA_TCD0_DADDR             MCF_REG32(0xFC045010)
++#define MCF_EDMA_TCD0_CITER_ELINK       MCF_REG16(0xFC045014)
++#define MCF_EDMA_TCD0_CITER             MCF_REG16(0xFC045014)
++#define MCF_EDMA_TCD0_DOFF              MCF_REG16(0xFC045016)
++#define MCF_EDMA_TCD0_DLAST_SGA         MCF_REG32(0xFC045018)
++#define MCF_EDMA_TCD0_BITER_ELINK       MCF_REG16(0xFC04501C)
++#define MCF_EDMA_TCD0_BITER             MCF_REG16(0xFC04501C)
++#define MCF_EDMA_TCD0_CSR               MCF_REG16(0xFC04501E)
++#define MCF_EDMA_TCD1_SADDR             MCF_REG32(0xFC045020)
++#define MCF_EDMA_TCD1_ATTR              MCF_REG16(0xFC045024)
++#define MCF_EDMA_TCD1_SOFF              MCF_REG16(0xFC045026)
++#define MCF_EDMA_TCD1_NBYTES            MCF_REG32(0xFC045028)
++#define MCF_EDMA_TCD1_SLAST             MCF_REG32(0xFC04502C)
++#define MCF_EDMA_TCD1_DADDR             MCF_REG32(0xFC045030)
++#define MCF_EDMA_TCD1_CITER_ELINK       MCF_REG16(0xFC045034)
++#define MCF_EDMA_TCD1_CITER             MCF_REG16(0xFC045034)
++#define MCF_EDMA_TCD1_DOFF              MCF_REG16(0xFC045036)
++#define MCF_EDMA_TCD1_DLAST_SGA         MCF_REG32(0xFC045038)
++#define MCF_EDMA_TCD1_BITER             MCF_REG16(0xFC04503C)
++#define MCF_EDMA_TCD1_BITER_ELINK       MCF_REG16(0xFC04503C)
++#define MCF_EDMA_TCD1_CSR               MCF_REG16(0xFC04503E)
++#define MCF_EDMA_TCD2_SADDR             MCF_REG32(0xFC045040)
++#define MCF_EDMA_TCD2_ATTR              MCF_REG16(0xFC045044)
++#define MCF_EDMA_TCD2_SOFF              MCF_REG16(0xFC045046)
++#define MCF_EDMA_TCD2_NBYTES            MCF_REG32(0xFC045048)
++#define MCF_EDMA_TCD2_SLAST             MCF_REG32(0xFC04504C)
++#define MCF_EDMA_TCD2_DADDR             MCF_REG32(0xFC045050)
++#define MCF_EDMA_TCD2_CITER             MCF_REG16(0xFC045054)
++#define MCF_EDMA_TCD2_CITER_ELINK       MCF_REG16(0xFC045054)
++#define MCF_EDMA_TCD2_DOFF              MCF_REG16(0xFC045056)
++#define MCF_EDMA_TCD2_DLAST_SGA         MCF_REG32(0xFC045058)
++#define MCF_EDMA_TCD2_BITER_ELINK       MCF_REG16(0xFC04505C)
++#define MCF_EDMA_TCD2_BITER             MCF_REG16(0xFC04505C)
++#define MCF_EDMA_TCD2_CSR               MCF_REG16(0xFC04505E)
++#define MCF_EDMA_TCD3_SADDR             MCF_REG32(0xFC045060)
++#define MCF_EDMA_TCD3_ATTR              MCF_REG16(0xFC045064)
++#define MCF_EDMA_TCD3_SOFF              MCF_REG16(0xFC045066)
++#define MCF_EDMA_TCD3_NBYTES            MCF_REG32(0xFC045068)
++#define MCF_EDMA_TCD3_SLAST             MCF_REG32(0xFC04506C)
++#define MCF_EDMA_TCD3_DADDR             MCF_REG32(0xFC045070)
++#define MCF_EDMA_TCD3_CITER             MCF_REG16(0xFC045074)
++#define MCF_EDMA_TCD3_CITER_ELINK       MCF_REG16(0xFC045074)
++#define MCF_EDMA_TCD3_DOFF              MCF_REG16(0xFC045076)
++#define MCF_EDMA_TCD3_DLAST_SGA         MCF_REG32(0xFC045078)
++#define MCF_EDMA_TCD3_BITER_ELINK       MCF_REG16(0xFC04507C)
++#define MCF_EDMA_TCD3_BITER             MCF_REG16(0xFC04507C)
++#define MCF_EDMA_TCD3_CSR               MCF_REG16(0xFC04507E)
++#define MCF_EDMA_TCD4_SADDR             MCF_REG32(0xFC045080)
++#define MCF_EDMA_TCD4_ATTR              MCF_REG16(0xFC045084)
++#define MCF_EDMA_TCD4_SOFF              MCF_REG16(0xFC045086)
++#define MCF_EDMA_TCD4_NBYTES            MCF_REG32(0xFC045088)
++#define MCF_EDMA_TCD4_SLAST             MCF_REG32(0xFC04508C)
++#define MCF_EDMA_TCD4_DADDR             MCF_REG32(0xFC045090)
++#define MCF_EDMA_TCD4_CITER             MCF_REG16(0xFC045094)
++#define MCF_EDMA_TCD4_CITER_ELINK       MCF_REG16(0xFC045094)
++#define MCF_EDMA_TCD4_DOFF              MCF_REG16(0xFC045096)
++#define MCF_EDMA_TCD4_DLAST_SGA         MCF_REG32(0xFC045098)
++#define MCF_EDMA_TCD4_BITER             MCF_REG16(0xFC04509C)
++#define MCF_EDMA_TCD4_BITER_ELINK       MCF_REG16(0xFC04509C)
++#define MCF_EDMA_TCD4_CSR               MCF_REG16(0xFC04509E)
++#define MCF_EDMA_TCD5_SADDR             MCF_REG32(0xFC0450A0)
++#define MCF_EDMA_TCD5_ATTR              MCF_REG16(0xFC0450A4)
++#define MCF_EDMA_TCD5_SOFF              MCF_REG16(0xFC0450A6)
++#define MCF_EDMA_TCD5_NBYTES            MCF_REG32(0xFC0450A8)
++#define MCF_EDMA_TCD5_SLAST             MCF_REG32(0xFC0450AC)
++#define MCF_EDMA_TCD5_DADDR             MCF_REG32(0xFC0450B0)
++#define MCF_EDMA_TCD5_CITER             MCF_REG16(0xFC0450B4)
++#define MCF_EDMA_TCD5_CITER_ELINK       MCF_REG16(0xFC0450B4)
++#define MCF_EDMA_TCD5_DOFF              MCF_REG16(0xFC0450B6)
++#define MCF_EDMA_TCD5_DLAST_SGA         MCF_REG32(0xFC0450B8)
++#define MCF_EDMA_TCD5_BITER_ELINK       MCF_REG16(0xFC0450BC)
++#define MCF_EDMA_TCD5_BITER             MCF_REG16(0xFC0450BC)
++#define MCF_EDMA_TCD5_CSR               MCF_REG16(0xFC0450BE)
++#define MCF_EDMA_TCD6_SADDR             MCF_REG32(0xFC0450C0)
++#define MCF_EDMA_TCD6_ATTR              MCF_REG16(0xFC0450C4)
++#define MCF_EDMA_TCD6_SOFF              MCF_REG16(0xFC0450C6)
++#define MCF_EDMA_TCD6_NBYTES            MCF_REG32(0xFC0450C8)
++#define MCF_EDMA_TCD6_SLAST             MCF_REG32(0xFC0450CC)
++#define MCF_EDMA_TCD6_DADDR             MCF_REG32(0xFC0450D0)
++#define MCF_EDMA_TCD6_CITER             MCF_REG16(0xFC0450D4)
++#define MCF_EDMA_TCD6_CITER_ELINK       MCF_REG16(0xFC0450D4)
++#define MCF_EDMA_TCD6_DOFF              MCF_REG16(0xFC0450D6)
++#define MCF_EDMA_TCD6_DLAST_SGA         MCF_REG32(0xFC0450D8)
++#define MCF_EDMA_TCD6_BITER_ELINK       MCF_REG16(0xFC0450DC)
++#define MCF_EDMA_TCD6_BITER             MCF_REG16(0xFC0450DC)
++#define MCF_EDMA_TCD6_CSR               MCF_REG16(0xFC0450DE)
++#define MCF_EDMA_TCD7_SADDR             MCF_REG32(0xFC0450E0)
++#define MCF_EDMA_TCD7_ATTR              MCF_REG16(0xFC0450E4)
++#define MCF_EDMA_TCD7_SOFF              MCF_REG16(0xFC0450E6)
++#define MCF_EDMA_TCD7_NBYTES            MCF_REG32(0xFC0450E8)
++#define MCF_EDMA_TCD7_SLAST             MCF_REG32(0xFC0450EC)
++#define MCF_EDMA_TCD7_DADDR             MCF_REG32(0xFC0450F0)
++#define MCF_EDMA_TCD7_CITER             MCF_REG16(0xFC0450F4)
++#define MCF_EDMA_TCD7_CITER_ELINK       MCF_REG16(0xFC0450F4)
++#define MCF_EDMA_TCD7_DOFF              MCF_REG16(0xFC0450F6)
++#define MCF_EDMA_TCD7_DLAST_SGA         MCF_REG32(0xFC0450F8)
++#define MCF_EDMA_TCD7_BITER_ELINK       MCF_REG16(0xFC0450FC)
++#define MCF_EDMA_TCD7_BITER             MCF_REG16(0xFC0450FC)
++#define MCF_EDMA_TCD7_CSR               MCF_REG16(0xFC0450FE)
++#define MCF_EDMA_TCD8_SADDR             MCF_REG32(0xFC045100)
++#define MCF_EDMA_TCD8_ATTR              MCF_REG16(0xFC045104)
++#define MCF_EDMA_TCD8_SOFF              MCF_REG16(0xFC045106)
++#define MCF_EDMA_TCD8_NBYTES            MCF_REG32(0xFC045108)
++#define MCF_EDMA_TCD8_SLAST             MCF_REG32(0xFC04510C)
++#define MCF_EDMA_TCD8_DADDR             MCF_REG32(0xFC045110)
++#define MCF_EDMA_TCD8_CITER             MCF_REG16(0xFC045114)
++#define MCF_EDMA_TCD8_CITER_ELINK       MCF_REG16(0xFC045114)
++#define MCF_EDMA_TCD8_DOFF              MCF_REG16(0xFC045116)
++#define MCF_EDMA_TCD8_DLAST_SGA         MCF_REG32(0xFC045118)
++#define MCF_EDMA_TCD8_BITER_ELINK       MCF_REG16(0xFC04511C)
++#define MCF_EDMA_TCD8_BITER             MCF_REG16(0xFC04511C)
++#define MCF_EDMA_TCD8_CSR               MCF_REG16(0xFC04511E)
++#define MCF_EDMA_TCD9_SADDR             MCF_REG32(0xFC045120)
++#define MCF_EDMA_TCD9_ATTR              MCF_REG16(0xFC045124)
++#define MCF_EDMA_TCD9_SOFF              MCF_REG16(0xFC045126)
++#define MCF_EDMA_TCD9_NBYTES            MCF_REG32(0xFC045128)
++#define MCF_EDMA_TCD9_SLAST             MCF_REG32(0xFC04512C)
++#define MCF_EDMA_TCD9_DADDR             MCF_REG32(0xFC045130)
++#define MCF_EDMA_TCD9_CITER_ELINK       MCF_REG16(0xFC045134)
++#define MCF_EDMA_TCD9_CITER             MCF_REG16(0xFC045134)
++#define MCF_EDMA_TCD9_DOFF              MCF_REG16(0xFC045136)
++#define MCF_EDMA_TCD9_DLAST_SGA         MCF_REG32(0xFC045138)
++#define MCF_EDMA_TCD9_BITER_ELINK       MCF_REG16(0xFC04513C)
++#define MCF_EDMA_TCD9_BITER             MCF_REG16(0xFC04513C)
++#define MCF_EDMA_TCD9_CSR               MCF_REG16(0xFC04513E)
++#define MCF_EDMA_TCD10_SADDR            MCF_REG32(0xFC045140)
++#define MCF_EDMA_TCD10_ATTR             MCF_REG16(0xFC045144)
++#define MCF_EDMA_TCD10_SOFF             MCF_REG16(0xFC045146)
++#define MCF_EDMA_TCD10_NBYTES           MCF_REG32(0xFC045148)
++#define MCF_EDMA_TCD10_SLAST            MCF_REG32(0xFC04514C)
++#define MCF_EDMA_TCD10_DADDR            MCF_REG32(0xFC045150)
++#define MCF_EDMA_TCD10_CITER_ELINK      MCF_REG16(0xFC045154)
++#define MCF_EDMA_TCD10_CITER            MCF_REG16(0xFC045154)
++#define MCF_EDMA_TCD10_DOFF             MCF_REG16(0xFC045156)
++#define MCF_EDMA_TCD10_DLAST_SGA        MCF_REG32(0xFC045158)
++#define MCF_EDMA_TCD10_BITER            MCF_REG16(0xFC04515C)
++#define MCF_EDMA_TCD10_BITER_ELINK      MCF_REG16(0xFC04515C)
++#define MCF_EDMA_TCD10_CSR              MCF_REG16(0xFC04515E)
++#define MCF_EDMA_TCD11_SADDR            MCF_REG32(0xFC045160)
++#define MCF_EDMA_TCD11_ATTR             MCF_REG16(0xFC045164)
++#define MCF_EDMA_TCD11_SOFF             MCF_REG16(0xFC045166)
++#define MCF_EDMA_TCD11_NBYTES           MCF_REG32(0xFC045168)
++#define MCF_EDMA_TCD11_SLAST            MCF_REG32(0xFC04516C)
++#define MCF_EDMA_TCD11_DADDR            MCF_REG32(0xFC045170)
++#define MCF_EDMA_TCD11_CITER            MCF_REG16(0xFC045174)
++#define MCF_EDMA_TCD11_CITER_ELINK      MCF_REG16(0xFC045174)
++#define MCF_EDMA_TCD11_DOFF             MCF_REG16(0xFC045176)
++#define MCF_EDMA_TCD11_DLAST_SGA        MCF_REG32(0xFC045178)
++#define MCF_EDMA_TCD11_BITER            MCF_REG16(0xFC04517C)
++#define MCF_EDMA_TCD11_BITER_ELINK      MCF_REG16(0xFC04517C)
++#define MCF_EDMA_TCD11_CSR              MCF_REG16(0xFC04517E)
++#define MCF_EDMA_TCD12_SADDR            MCF_REG32(0xFC045180)
++#define MCF_EDMA_TCD12_ATTR             MCF_REG16(0xFC045184)
++#define MCF_EDMA_TCD12_SOFF             MCF_REG16(0xFC045186)
++#define MCF_EDMA_TCD12_NBYTES           MCF_REG32(0xFC045188)
++#define MCF_EDMA_TCD12_SLAST            MCF_REG32(0xFC04518C)
++#define MCF_EDMA_TCD12_DADDR            MCF_REG32(0xFC045190)
++#define MCF_EDMA_TCD12_CITER            MCF_REG16(0xFC045194)
++#define MCF_EDMA_TCD12_CITER_ELINK      MCF_REG16(0xFC045194)
++#define MCF_EDMA_TCD12_DOFF             MCF_REG16(0xFC045196)
++#define MCF_EDMA_TCD12_DLAST_SGA        MCF_REG32(0xFC045198)
++#define MCF_EDMA_TCD12_BITER            MCF_REG16(0xFC04519C)
++#define MCF_EDMA_TCD12_BITER_ELINK      MCF_REG16(0xFC04519C)
++#define MCF_EDMA_TCD12_CSR              MCF_REG16(0xFC04519E)
++#define MCF_EDMA_TCD13_SADDR            MCF_REG32(0xFC0451A0)
++#define MCF_EDMA_TCD13_ATTR             MCF_REG16(0xFC0451A4)
++#define MCF_EDMA_TCD13_SOFF             MCF_REG16(0xFC0451A6)
++#define MCF_EDMA_TCD13_NBYTES           MCF_REG32(0xFC0451A8)
++#define MCF_EDMA_TCD13_SLAST            MCF_REG32(0xFC0451AC)
++#define MCF_EDMA_TCD13_DADDR            MCF_REG32(0xFC0451B0)
++#define MCF_EDMA_TCD13_CITER_ELINK      MCF_REG16(0xFC0451B4)
++#define MCF_EDMA_TCD13_CITER            MCF_REG16(0xFC0451B4)
++#define MCF_EDMA_TCD13_DOFF             MCF_REG16(0xFC0451B6)
++#define MCF_EDMA_TCD13_DLAST_SGA        MCF_REG32(0xFC0451B8)
++#define MCF_EDMA_TCD13_BITER_ELINK      MCF_REG16(0xFC0451BC)
++#define MCF_EDMA_TCD13_BITER            MCF_REG16(0xFC0451BC)
++#define MCF_EDMA_TCD13_CSR              MCF_REG16(0xFC0451BE)
++#define MCF_EDMA_TCD14_SADDR            MCF_REG32(0xFC0451C0)
++#define MCF_EDMA_TCD14_ATTR             MCF_REG16(0xFC0451C4)
++#define MCF_EDMA_TCD14_SOFF             MCF_REG16(0xFC0451C6)
++#define MCF_EDMA_TCD14_NBYTES           MCF_REG32(0xFC0451C8)
++#define MCF_EDMA_TCD14_SLAST            MCF_REG32(0xFC0451CC)
++#define MCF_EDMA_TCD14_DADDR            MCF_REG32(0xFC0451D0)
++#define MCF_EDMA_TCD14_CITER            MCF_REG16(0xFC0451D4)
++#define MCF_EDMA_TCD14_CITER_ELINK      MCF_REG16(0xFC0451D4)
++#define MCF_EDMA_TCD14_DOFF             MCF_REG16(0xFC0451D6)
++#define MCF_EDMA_TCD14_DLAST_SGA        MCF_REG32(0xFC0451D8)
++#define MCF_EDMA_TCD14_BITER_ELINK      MCF_REG16(0xFC0451DC)
++#define MCF_EDMA_TCD14_BITER            MCF_REG16(0xFC0451DC)
++#define MCF_EDMA_TCD14_CSR              MCF_REG16(0xFC0451DE)
++#define MCF_EDMA_TCD15_SADDR            MCF_REG32(0xFC0451E0)
++#define MCF_EDMA_TCD15_ATTR             MCF_REG16(0xFC0451E4)
++#define MCF_EDMA_TCD15_SOFF             MCF_REG16(0xFC0451E6)
++#define MCF_EDMA_TCD15_NBYTES           MCF_REG32(0xFC0451E8)
++#define MCF_EDMA_TCD15_SLAST            MCF_REG32(0xFC0451EC)
++#define MCF_EDMA_TCD15_DADDR            MCF_REG32(0xFC0451F0)
++#define MCF_EDMA_TCD15_CITER_ELINK      MCF_REG16(0xFC0451F4)
++#define MCF_EDMA_TCD15_CITER            MCF_REG16(0xFC0451F4)
++#define MCF_EDMA_TCD15_DOFF             MCF_REG16(0xFC0451F6)
++#define MCF_EDMA_TCD15_DLAST_SGA        MCF_REG32(0xFC0451F8)
++#define MCF_EDMA_TCD15_BITER            MCF_REG16(0xFC0451FC)
++#define MCF_EDMA_TCD15_BITER_ELINK      MCF_REG16(0xFC0451FC)
++#define MCF_EDMA_TCD15_CSR              MCF_REG16(0xFC0451FE)
++
++/* Parameterized register read/write macros for multiple registers */
++#define MCF_EDMA_DCHPRI(x)              MCF_REG08(0xFC044100+((x)*0x001))
++#define MCF_EDMA_TCD_SADDR(x)           MCF_REG32(0xFC045000+((x)*0x020))
++#define MCF_EDMA_TCD_ATTR(x)            MCF_REG16(0xFC045004+((x)*0x020))
++#define MCF_EDMA_TCD_SOFF(x)            MCF_REG16(0xFC045006+((x)*0x020))
++#define MCF_EDMA_TCD_NBYTES(x)          MCF_REG32(0xFC045008+((x)*0x020))
++#define MCF_EDMA_TCD_SLAST(x)           MCF_REG32(0xFC04500C+((x)*0x020))
++#define MCF_EDMA_TCD_DADDR(x)           MCF_REG32(0xFC045010+((x)*0x020))
++#define MCF_EDMA_TCD_CITER_ELINK(x)     MCF_REG16(0xFC045014+((x)*0x020))
++#define MCF_EDMA_TCD_CITER(x)           MCF_REG16(0xFC045014+((x)*0x020))
++#define MCF_EDMA_TCD_DOFF(x)            MCF_REG16(0xFC045016+((x)*0x020))
++#define MCF_EDMA_TCD_DLAST_SGA(x)       MCF_REG32(0xFC045018+((x)*0x020))
++#define MCF_EDMA_TCD_BITER_ELINK(x)     MCF_REG16(0xFC04501C+((x)*0x020))
++#define MCF_EDMA_TCD_BITER(x)           MCF_REG16(0xFC04501C+((x)*0x020))
++#define MCF_EDMA_TCD_CSR(x)             MCF_REG16(0xFC04501e +((x)*0x020))
++
++/* Bit definitions and macros for CR */
++#define MCF_EDMA_CR_EDBG        (0x00000002)
++#define MCF_EDMA_CR_ERCA        (0x00000004)
++
++/* Bit definitions and macros for ES */
++#define MCF_EDMA_ES_DBE         (0x00000001)
++#define MCF_EDMA_ES_SBE         (0x00000002)
++#define MCF_EDMA_ES_SGE         (0x00000004)
++#define MCF_EDMA_ES_NCE         (0x00000008)
++#define MCF_EDMA_ES_DOE         (0x00000010)
++#define MCF_EDMA_ES_DAE         (0x00000020)
++#define MCF_EDMA_ES_SOE         (0x00000040)
++#define MCF_EDMA_ES_SAE         (0x00000080)
++#define MCF_EDMA_ES_ERRCHN(x)   (((x)&0x0000000F)<<8)
++#define MCF_EDMA_ES_CPE         (0x00004000)
++#define MCF_EDMA_ES_VLD         (0x80000000)
++
++/* Bit definitions and macros for ERQ */
++#define MCF_EDMA_ERQ_ERQ0       (0x0001)
++#define MCF_EDMA_ERQ_ERQ1       (0x0002)
++#define MCF_EDMA_ERQ_ERQ2       (0x0004)
++#define MCF_EDMA_ERQ_ERQ3       (0x0008)
++#define MCF_EDMA_ERQ_ERQ4       (0x0010)
++#define MCF_EDMA_ERQ_ERQ5       (0x0020)
++#define MCF_EDMA_ERQ_ERQ6       (0x0040)
++#define MCF_EDMA_ERQ_ERQ7       (0x0080)
++#define MCF_EDMA_ERQ_ERQ8       (0x0100)
++#define MCF_EDMA_ERQ_ERQ9       (0x0200)
++#define MCF_EDMA_ERQ_ERQ10      (0x0400)
++#define MCF_EDMA_ERQ_ERQ11      (0x0800)
++#define MCF_EDMA_ERQ_ERQ12      (0x1000)
++#define MCF_EDMA_ERQ_ERQ13      (0x2000)
++#define MCF_EDMA_ERQ_ERQ14      (0x4000)
++#define MCF_EDMA_ERQ_ERQ15      (0x8000)
++
++/* Bit definitions and macros for EEI */
++#define MCF_EDMA_EEI_EEI0       (0x0001)
++#define MCF_EDMA_EEI_EEI1       (0x0002)
++#define MCF_EDMA_EEI_EEI2       (0x0004)
++#define MCF_EDMA_EEI_EEI3       (0x0008)
++#define MCF_EDMA_EEI_EEI4       (0x0010)
++#define MCF_EDMA_EEI_EEI5       (0x0020)
++#define MCF_EDMA_EEI_EEI6       (0x0040)
++#define MCF_EDMA_EEI_EEI7       (0x0080)
++#define MCF_EDMA_EEI_EEI8       (0x0100)
++#define MCF_EDMA_EEI_EEI9       (0x0200)
++#define MCF_EDMA_EEI_EEI10      (0x0400)
++#define MCF_EDMA_EEI_EEI11      (0x0800)
++#define MCF_EDMA_EEI_EEI12      (0x1000)
++#define MCF_EDMA_EEI_EEI13      (0x2000)
++#define MCF_EDMA_EEI_EEI14      (0x4000)
++#define MCF_EDMA_EEI_EEI15      (0x8000)
++
++/* Bit definitions and macros for SERQ */
++#define MCF_EDMA_SERQ_SERQ(x)   (((x)&0x0F))
++#define MCF_EDMA_SERQ_SAER      (0x40)
++
++/* Bit definitions and macros for CERQ */
++#define MCF_EDMA_CERQ_CERQ(x)   (((x)&0x0F))
++#define MCF_EDMA_CERQ_CAER      (0x40)
++
++/* Bit definitions and macros for SEEI */
++#define MCF_EDMA_SEEI_SEEI(x)   (((x)&0x0F))
++#define MCF_EDMA_SEEI_SAEE      (0x40)
++
++/* Bit definitions and macros for CEEI */
++#define MCF_EDMA_CEEI_CEEI(x)   (((x)&0x0F))
++#define MCF_EDMA_CEEI_CAEE      (0x40)
++
++/* Bit definitions and macros for CINT */
++#define MCF_EDMA_CINT_CINT(x)   (((x)&0x0F))
++#define MCF_EDMA_CINT_CAIR      (0x40)
++
++/* Bit definitions and macros for CERR */
++#define MCF_EDMA_CERR_CERR(x)   (((x)&0x0F))
++#define MCF_EDMA_CERR_CAER      (0x40)
++
++/* Bit definitions and macros for SSRT */
++#define MCF_EDMA_SSRT_SSRT(x)   (((x)&0x0F))
++#define MCF_EDMA_SSRT_SAST      (0x40)
++
++/* Bit definitions and macros for CDNE */
++#define MCF_EDMA_CDNE_CDNE(x)   (((x)&0x0F))
++#define MCF_EDMA_CDNE_CADN      (0x40)
++
++/* Bit definitions and macros for INTR */
++#define MCF_EDMA_INTR_INT0      (0x0001)
++#define MCF_EDMA_INTR_INT1      (0x0002)
++#define MCF_EDMA_INTR_INT2      (0x0004)
++#define MCF_EDMA_INTR_INT3      (0x0008)
++#define MCF_EDMA_INTR_INT4      (0x0010)
++#define MCF_EDMA_INTR_INT5      (0x0020)
++#define MCF_EDMA_INTR_INT6      (0x0040)
++#define MCF_EDMA_INTR_INT7      (0x0080)
++#define MCF_EDMA_INTR_INT8      (0x0100)
++#define MCF_EDMA_INTR_INT9      (0x0200)
++#define MCF_EDMA_INTR_INT10     (0x0400)
++#define MCF_EDMA_INTR_INT11     (0x0800)
++#define MCF_EDMA_INTR_INT12     (0x1000)
++#define MCF_EDMA_INTR_INT13     (0x2000)
++#define MCF_EDMA_INTR_INT14     (0x4000)
++#define MCF_EDMA_INTR_INT15     (0x8000)
++
++/* Bit definitions and macros for ERR */
++#define MCF_EDMA_ERR_ERR0       (0x0001)
++#define MCF_EDMA_ERR_ERR1       (0x0002)
++#define MCF_EDMA_ERR_ERR2       (0x0004)
++#define MCF_EDMA_ERR_ERR3       (0x0008)
++#define MCF_EDMA_ERR_ERR4       (0x0010)
++#define MCF_EDMA_ERR_ERR5       (0x0020)
++#define MCF_EDMA_ERR_ERR6       (0x0040)
++#define MCF_EDMA_ERR_ERR7       (0x0080)
++#define MCF_EDMA_ERR_ERR8       (0x0100)
++#define MCF_EDMA_ERR_ERR9       (0x0200)
++#define MCF_EDMA_ERR_ERR10      (0x0400)
++#define MCF_EDMA_ERR_ERR11      (0x0800)
++#define MCF_EDMA_ERR_ERR12      (0x1000)
++#define MCF_EDMA_ERR_ERR13      (0x2000)
++#define MCF_EDMA_ERR_ERR14      (0x4000)
++#define MCF_EDMA_ERR_ERR15      (0x8000)
++
++/* Bit definitions and macros for DCHPRI group */
++#define MCF_EDMA_DCHPRI_CHPRI(x)    (((x)&0x0F))
++#define MCF_EDMA_DCHPRI_ECP         (0x80)
++
++/* Bit definitions and macros for DCHPRI0 */
++#define MCF_EDMA_DCHPRI0_CHPRI(x)   (((x)&0x0F))
++#define MCF_EDMA_DCHPRI0_ECP        (0x80)
++
++/* Bit definitions and macros for DCHPRI1 */
++#define MCF_EDMA_DCHPRI1_CHPRI(x)   (((x)&0x0F))
++#define MCF_EDMA_DCHPRI1_ECP        (0x80)
++
++/* Bit definitions and macros for DCHPRI2 */
++#define MCF_EDMA_DCHPRI2_CHPRI(x)   (((x)&0x0F))
++#define MCF_EDMA_DCHPRI2_ECP        (0x80)
++
++/* Bit definitions and macros for DCHPRI3 */
++#define MCF_EDMA_DCHPRI3_CHPRI(x)   (((x)&0x0F))
++#define MCF_EDMA_DCHPRI3_ECP        (0x80)
++
++/* Bit definitions and macros for DCHPRI4 */
++#define MCF_EDMA_DCHPRI4_CHPRI(x)   (((x)&0x0F))
++#define MCF_EDMA_DCHPRI4_ECP        (0x80)
++
++/* Bit definitions and macros for DCHPRI5 */
++#define MCF_EDMA_DCHPRI5_CHPRI(x)   (((x)&0x0F))
++#define MCF_EDMA_DCHPRI5_ECP        (0x80)
++
++/* Bit definitions and macros for DCHPRI6 */
++#define MCF_EDMA_DCHPRI6_CHPRI(x)   (((x)&0x0F))
++#define MCF_EDMA_DCHPRI6_ECP        (0x80)
++
++/* Bit definitions and macros for DCHPRI7 */
++#define MCF_EDMA_DCHPRI7_CHPRI(x)   (((x)&0x0F))
++#define MCF_EDMA_DCHPRI7_ECP        (0x80)
++
++/* Bit definitions and macros for DCHPRI8 */
++#define MCF_EDMA_DCHPRI8_CHPRI(x)   (((x)&0x0F))
++#define MCF_EDMA_DCHPRI8_ECP        (0x80)
++
++/* Bit definitions and macros for DCHPRI9 */
++#define MCF_EDMA_DCHPRI9_CHPRI(x)   (((x)&0x0F))
++#define MCF_EDMA_DCHPRI9_ECP        (0x80)
++
++/* Bit definitions and macros for DCHPRI10 */
++#define MCF_EDMA_DCHPRI10_CHPRI(x)      (((x)&0x0F))
++#define MCF_EDMA_DCHPRI10_ECP           (0x80)
++
++/* Bit definitions and macros for DCHPRI11 */
++#define MCF_EDMA_DCHPRI11_CHPRI(x)      (((x)&0x0F))
++#define MCF_EDMA_DCHPRI11_ECP           (0x80)
++
++/* Bit definitions and macros for DCHPRI12 */
++#define MCF_EDMA_DCHPRI12_CHPRI(x)      (((x)&0x0F))
++#define MCF_EDMA_DCHPRI12_ECP           (0x80)
++
++/* Bit definitions and macros for DCHPRI13 */
++#define MCF_EDMA_DCHPRI13_CHPRI(x)      (((x)&0x0F))
++#define MCF_EDMA_DCHPRI13_ECP           (0x80)
++
++/* Bit definitions and macros for DCHPRI14 */
++#define MCF_EDMA_DCHPRI14_CHPRI(x)      (((x)&0x0F))
++#define MCF_EDMA_DCHPRI14_ECP           (0x80)
++
++/* Bit definitions and macros for DCHPRI15 */
++#define MCF_EDMA_DCHPRI15_CHPRI(x)      (((x)&0x0F))
++#define MCF_EDMA_DCHPRI15_ECP           (0x80)
++
++/* Bit definitions and macros for TCD_SADDR group */
++#define MCF_EDMA_TCD_SADDR_SADDR(x)     (x)
++
++/* Bit definitions and macros for TCD0_SADDR */
++#define MCF_EDMA_TCD0_SADDR_SADDR(x)    (x)
++
++/* Bit definitions and macros for TCD_ATTR group */
++#define MCF_EDMA_TCD_ATTR_DSIZE(x)          (((x)&0x0007))
++#define MCF_EDMA_TCD_ATTR_DMOD(x)           (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD_ATTR_SSIZE(x)          (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD_ATTR_SMOD(x)           (((x)&0x001F)<<11)
++#define MCF_EDMA_TCD_ATTR_SSIZE_8BIT        (0x0000)
++#define MCF_EDMA_TCD_ATTR_SSIZE_16BIT       (0x0100)
++#define MCF_EDMA_TCD_ATTR_SSIZE_32BIT       (0x0200)
++#define MCF_EDMA_TCD_ATTR_SSIZE_16BYTE      (0x0400)
++#define MCF_EDMA_TCD_ATTR_DSIZE_8BIT        (0x0000)
++#define MCF_EDMA_TCD_ATTR_DSIZE_16BIT       (0x0001)
++#define MCF_EDMA_TCD_ATTR_DSIZE_32BIT       (0x0002)
++#define MCF_EDMA_TCD_ATTR_DSIZE_16BYTE      (0x0004)
++
++/* Bit definitions and macros for TCD0_ATTR */
++#define MCF_EDMA_TCD0_ATTR_DSIZE(x)         (((x)&0x0007))
++#define MCF_EDMA_TCD0_ATTR_DMOD(x)          (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD0_ATTR_SSIZE(x)         (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD0_ATTR_SMOD(x)          (((x)&0x001F)<<11)
++#define MCF_EDMA_TCD0_ATTR_SSIZE_8BIT       (0x0000)
++#define MCF_EDMA_TCD0_ATTR_SSIZE_16BIT      (0x0100)
++#define MCF_EDMA_TCD0_ATTR_SSIZE_32BIT      (0x0200)
++#define MCF_EDMA_TCD0_ATTR_SSIZE_16BYTE     (0x0400)
++#define MCF_EDMA_TCD0_ATTR_DSIZE_8BIT       (0x0000)
++#define MCF_EDMA_TCD0_ATTR_DSIZE_16BIT      (0x0001)
++#define MCF_EDMA_TCD0_ATTR_DSIZE_32BIT      (0x0002)
++#define MCF_EDMA_TCD0_ATTR_DSIZE_16BYTE     (0x0004)
++
++/* Bit definitions and macros for TCD_SOFF group */
++#define MCF_EDMA_TCD_SOFF_SOFF(x)   (x)
++
++/* Bit definitions and macros for TCD0_SOFF */
++#define MCF_EDMA_TCD0_SOFF_SOFF(x)      (x)
++
++/* Bit definitions and macros for TCD_NBYTES group */
++#define MCF_EDMA_TCD_NBYTES_NBYTES(x)   (x)
++
++/* Bit definitions and macros for TCD0_NBYTES */
++#define MCF_EDMA_TCD0_NBYTES_NBYTES(x)      (x)
++
++/* Bit definitions and macros for TCD_SLAST group */
++#define MCF_EDMA_TCD_SLAST_SLAST(x)     (x)
++
++/* Bit definitions and macros for TCD0_SLAST */
++#define MCF_EDMA_TCD0_SLAST_SLAST(x)    (x)
++
++/* Bit definitions and macros for TCD_DADDR group */
++#define MCF_EDMA_TCD_DADDR_DADDR(x)     (x)
++
++/* Bit definitions and macros for TCD0_DADDR */
++#define MCF_EDMA_TCD0_DADDR_DADDR(x)    (x)
++
++/* Bit definitions and macros for TCD_CITER_ELINK group */
++#define MCF_EDMA_TCD_CITER_ELINK_CITER(x)       (((x)&0x01FF))
++#define MCF_EDMA_TCD_CITER_ELINK_LINKCH(x)      (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD_CITER_ELINK_E_LINK         (0x8000)
++
++/* Bit definitions and macros for TCD0_CITER_ELINK */
++#define MCF_EDMA_TCD0_CITER_ELINK_CITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD0_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD0_CITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD_CITER group */
++#define MCF_EDMA_TCD_CITER_CITER(x)     (((x)&0x7FFF))
++#define MCF_EDMA_TCD_CITER_E_LINK       (0x8000)
++
++/* Bit definitions and macros for TCD0_CITER */
++#define MCF_EDMA_TCD0_CITER_CITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD0_CITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD_DOFF group */
++#define MCF_EDMA_TCD_DOFF_DOFF(x)   (x)
++
++/* Bit definitions and macros for TCD0_DOFF */
++#define MCF_EDMA_TCD0_DOFF_DOFF(x)      (x)
++
++/* Bit definitions and macros for TCD_DLAST_SGA group */
++#define MCF_EDMA_TCD_DLAST_SGA_DLAST_SGA(x)     (x)
++
++/* Bit definitions and macros for TCD0_DLAST_SGA */
++#define MCF_EDMA_TCD0_DLAST_SGA_DLAST_SGA(x)    (x)
++
++/* Bit definitions and macros for TCD_BITER_ELINK group */
++#define MCF_EDMA_TCD_BITER_ELINK_BITER(x)       (((x)&0x01FF))
++#define MCF_EDMA_TCD_BITER_ELINK_LINKCH(x)      (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD_BITER_ELINK_E_LINK         (0x8000)
++
++/* Bit definitions and macros for TCD0_BITER_ELINK */
++#define MCF_EDMA_TCD0_BITER_ELINK_BITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD0_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD0_BITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD_BITER group */
++#define MCF_EDMA_TCD_BITER_BITER(x)     (((x)&0x7FFF))
++#define MCF_EDMA_TCD_BITER_E_LINK       (0x8000)
++
++/* Bit definitions and macros for TCD0_BITER */
++#define MCF_EDMA_TCD0_BITER_BITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD0_BITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD_CSR group */
++#define MCF_EDMA_TCD_CSR_START              (0x0001)
++#define MCF_EDMA_TCD_CSR_INT_MAJOR          (0x0002)
++#define MCF_EDMA_TCD_CSR_INT_HALF           (0x0004)
++#define MCF_EDMA_TCD_CSR_D_REQ              (0x0008)
++#define MCF_EDMA_TCD_CSR_E_SG               (0x0010)
++#define MCF_EDMA_TCD_CSR_E_LINK             (0x0020)
++#define MCF_EDMA_TCD_CSR_ACTIVE             (0x0040)
++#define MCF_EDMA_TCD_CSR_DONE               (0x0080)
++#define MCF_EDMA_TCD_CSR_LINKCH(x)          (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD_CSR_BWC(x)             (((x)&0x0003)<<14)
++#define MCF_EDMA_TCD_CSR_BWC_NO_STALL       (0x0000)
++#define MCF_EDMA_TCD_CSR_BWC_4CYC_STALL     (0x8000)
++#define MCF_EDMA_TCD_CSR_BWC_8CYC_STALL     (0xC000)
++
++/* Bit definitions and macros for TCD0_CSR */
++#define MCF_EDMA_TCD0_CSR_START             (0x0001)
++#define MCF_EDMA_TCD0_CSR_INT_MAJOR         (0x0002)
++#define MCF_EDMA_TCD0_CSR_INT_HALF          (0x0004)
++#define MCF_EDMA_TCD0_CSR_D_REQ             (0x0008)
++#define MCF_EDMA_TCD0_CSR_E_SG              (0x0010)
++#define MCF_EDMA_TCD0_CSR_E_LINK            (0x0020)
++#define MCF_EDMA_TCD0_CSR_ACTIVE            (0x0040)
++#define MCF_EDMA_TCD0_CSR_DONE              (0x0080)
++#define MCF_EDMA_TCD0_CSR_LINKCH(x)         (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD0_CSR_BWC(x)            (((x)&0x0003)<<14)
++#define MCF_EDMA_TCD0_CSR_BWC_NO_STALL      (0x0000)
++#define MCF_EDMA_TCD0_CSR_BWC_4CYC_STALL    (0x8000)
++#define MCF_EDMA_TCD0_CSR_BWC_8CYC_STALL    (0xC000)
++
++/* Bit definitions and macros for TCD1_SADDR */
++#define MCF_EDMA_TCD1_SADDR_SADDR(x)    (x)
++
++/* Bit definitions and macros for TCD1_ATTR */
++#define MCF_EDMA_TCD1_ATTR_DSIZE(x)     (((x)&0x0007))
++#define MCF_EDMA_TCD1_ATTR_DMOD(x)      (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD1_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD1_ATTR_SMOD(x)      (((x)&0x001F)<<11)
++
++/* Bit definitions and macros for TCD1_SOFF */
++#define MCF_EDMA_TCD1_SOFF_SOFF(x)      (x)
++
++/* Bit definitions and macros for TCD1_NBYTES */
++#define MCF_EDMA_TCD1_NBYTES_NBYTES(x)      (x)
++
++/* Bit definitions and macros for TCD1_SLAST */
++#define MCF_EDMA_TCD1_SLAST_SLAST(x)    (x)
++
++/* Bit definitions and macros for TCD1_DADDR */
++#define MCF_EDMA_TCD1_DADDR_DADDR(x)    (x)
++
++/* Bit definitions and macros for TCD1_CITER_ELINK */
++#define MCF_EDMA_TCD1_CITER_ELINK_CITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD1_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD1_CITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD1_CITER */
++#define MCF_EDMA_TCD1_CITER_CITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD1_CITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD1_DOFF */
++#define MCF_EDMA_TCD1_DOFF_DOFF(x)      (x)
++
++/* Bit definitions and macros for TCD1_DLAST_SGA */
++#define MCF_EDMA_TCD1_DLAST_SGA_DLAST_SGA(x)    (x)
++
++/* Bit definitions and macros for TCD1_BITER */
++#define MCF_EDMA_TCD1_BITER_BITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD1_BITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD1_BITER_ELINK */
++#define MCF_EDMA_TCD1_BITER_ELINK_BITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD1_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD1_BITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD1_CSR */
++#define MCF_EDMA_TCD1_CSR_START         (0x0001)
++#define MCF_EDMA_TCD1_CSR_INT_MAJOR     (0x0002)
++#define MCF_EDMA_TCD1_CSR_INT_HALF      (0x0004)
++#define MCF_EDMA_TCD1_CSR_D_REQ         (0x0008)
++#define MCF_EDMA_TCD1_CSR_E_SG          (0x0010)
++#define MCF_EDMA_TCD1_CSR_E_LINK        (0x0020)
++#define MCF_EDMA_TCD1_CSR_ACTIVE        (0x0040)
++#define MCF_EDMA_TCD1_CSR_DONE          (0x0080)
++#define MCF_EDMA_TCD1_CSR_LINKCH(x)     (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD1_CSR_BWC(x)        (((x)&0x0003)<<14)
++
++/* Bit definitions and macros for TCD2_SADDR */
++#define MCF_EDMA_TCD2_SADDR_SADDR(x)    (x)
++
++/* Bit definitions and macros for TCD2_ATTR */
++#define MCF_EDMA_TCD2_ATTR_DSIZE(x)     (((x)&0x0007))
++#define MCF_EDMA_TCD2_ATTR_DMOD(x)      (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD2_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD2_ATTR_SMOD(x)      (((x)&0x001F)<<11)
++
++/* Bit definitions and macros for TCD2_SOFF */
++#define MCF_EDMA_TCD2_SOFF_SOFF(x)      (x)
++
++/* Bit definitions and macros for TCD2_NBYTES */
++#define MCF_EDMA_TCD2_NBYTES_NBYTES(x)      (x)
++
++/* Bit definitions and macros for TCD2_SLAST */
++#define MCF_EDMA_TCD2_SLAST_SLAST(x)    (x)
++
++/* Bit definitions and macros for TCD2_DADDR */
++#define MCF_EDMA_TCD2_DADDR_DADDR(x)    (x)
++
++/* Bit definitions and macros for TCD2_CITER */
++#define MCF_EDMA_TCD2_CITER_CITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD2_CITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD2_CITER_ELINK */
++#define MCF_EDMA_TCD2_CITER_ELINK_CITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD2_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD2_CITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD2_DOFF */
++#define MCF_EDMA_TCD2_DOFF_DOFF(x)      (x)
++
++/* Bit definitions and macros for TCD2_DLAST_SGA */
++#define MCF_EDMA_TCD2_DLAST_SGA_DLAST_SGA(x)    (x)
++
++/* Bit definitions and macros for TCD2_BITER_ELINK */
++#define MCF_EDMA_TCD2_BITER_ELINK_BITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD2_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD2_BITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD2_BITER */
++#define MCF_EDMA_TCD2_BITER_BITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD2_BITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD2_CSR */
++#define MCF_EDMA_TCD2_CSR_START         (0x0001)
++#define MCF_EDMA_TCD2_CSR_INT_MAJOR     (0x0002)
++#define MCF_EDMA_TCD2_CSR_INT_HALF      (0x0004)
++#define MCF_EDMA_TCD2_CSR_D_REQ         (0x0008)
++#define MCF_EDMA_TCD2_CSR_E_SG          (0x0010)
++#define MCF_EDMA_TCD2_CSR_E_LINK        (0x0020)
++#define MCF_EDMA_TCD2_CSR_ACTIVE        (0x0040)
++#define MCF_EDMA_TCD2_CSR_DONE          (0x0080)
++#define MCF_EDMA_TCD2_CSR_LINKCH(x)     (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD2_CSR_BWC(x)        (((x)&0x0003)<<14)
++
++/* Bit definitions and macros for TCD3_SADDR */
++#define MCF_EDMA_TCD3_SADDR_SADDR(x)    (x)
++
++/* Bit definitions and macros for TCD3_ATTR */
++#define MCF_EDMA_TCD3_ATTR_DSIZE(x)     (((x)&0x0007))
++#define MCF_EDMA_TCD3_ATTR_DMOD(x)      (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD3_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD3_ATTR_SMOD(x)      (((x)&0x001F)<<11)
++
++/* Bit definitions and macros for TCD3_SOFF */
++#define MCF_EDMA_TCD3_SOFF_SOFF(x)      (x)
++
++/* Bit definitions and macros for TCD3_NBYTES */
++#define MCF_EDMA_TCD3_NBYTES_NBYTES(x)      (x)
++
++/* Bit definitions and macros for TCD3_SLAST */
++#define MCF_EDMA_TCD3_SLAST_SLAST(x)    (x)
++
++/* Bit definitions and macros for TCD3_DADDR */
++#define MCF_EDMA_TCD3_DADDR_DADDR(x)    (x)
++
++/* Bit definitions and macros for TCD3_CITER */
++#define MCF_EDMA_TCD3_CITER_CITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD3_CITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD3_CITER_ELINK */
++#define MCF_EDMA_TCD3_CITER_ELINK_CITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD3_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD3_CITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD3_DOFF */
++#define MCF_EDMA_TCD3_DOFF_DOFF(x)      (x)
++
++/* Bit definitions and macros for TCD3_DLAST_SGA */
++#define MCF_EDMA_TCD3_DLAST_SGA_DLAST_SGA(x)    (x)
++
++/* Bit definitions and macros for TCD3_BITER_ELINK */
++#define MCF_EDMA_TCD3_BITER_ELINK_BITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD3_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD3_BITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD3_BITER */
++#define MCF_EDMA_TCD3_BITER_BITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD3_BITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD3_CSR */
++#define MCF_EDMA_TCD3_CSR_START         (0x0001)
++#define MCF_EDMA_TCD3_CSR_INT_MAJOR     (0x0002)
++#define MCF_EDMA_TCD3_CSR_INT_HALF      (0x0004)
++#define MCF_EDMA_TCD3_CSR_D_REQ         (0x0008)
++#define MCF_EDMA_TCD3_CSR_E_SG          (0x0010)
++#define MCF_EDMA_TCD3_CSR_E_LINK        (0x0020)
++#define MCF_EDMA_TCD3_CSR_ACTIVE        (0x0040)
++#define MCF_EDMA_TCD3_CSR_DONE          (0x0080)
++#define MCF_EDMA_TCD3_CSR_LINKCH(x)     (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD3_CSR_BWC(x)        (((x)&0x0003)<<14)
++
++/* Bit definitions and macros for TCD4_SADDR */
++#define MCF_EDMA_TCD4_SADDR_SADDR(x)    (x)
++
++/* Bit definitions and macros for TCD4_ATTR */
++#define MCF_EDMA_TCD4_ATTR_DSIZE(x)     (((x)&0x0007))
++#define MCF_EDMA_TCD4_ATTR_DMOD(x)      (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD4_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD4_ATTR_SMOD(x)      (((x)&0x001F)<<11)
++
++/* Bit definitions and macros for TCD4_SOFF */
++#define MCF_EDMA_TCD4_SOFF_SOFF(x)      (x)
++
++/* Bit definitions and macros for TCD4_NBYTES */
++#define MCF_EDMA_TCD4_NBYTES_NBYTES(x)      (x)
++
++/* Bit definitions and macros for TCD4_SLAST */
++#define MCF_EDMA_TCD4_SLAST_SLAST(x)    (x)
++
++/* Bit definitions and macros for TCD4_DADDR */
++#define MCF_EDMA_TCD4_DADDR_DADDR(x)    (x)
++
++/* Bit definitions and macros for TCD4_CITER */
++#define MCF_EDMA_TCD4_CITER_CITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD4_CITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD4_CITER_ELINK */
++#define MCF_EDMA_TCD4_CITER_ELINK_CITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD4_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD4_CITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD4_DOFF */
++#define MCF_EDMA_TCD4_DOFF_DOFF(x)      (x)
++
++/* Bit definitions and macros for TCD4_DLAST_SGA */
++#define MCF_EDMA_TCD4_DLAST_SGA_DLAST_SGA(x)    (x)
++
++/* Bit definitions and macros for TCD4_BITER */
++#define MCF_EDMA_TCD4_BITER_BITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD4_BITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD4_BITER_ELINK */
++#define MCF_EDMA_TCD4_BITER_ELINK_BITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD4_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD4_BITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD4_CSR */
++#define MCF_EDMA_TCD4_CSR_START         (0x0001)
++#define MCF_EDMA_TCD4_CSR_INT_MAJOR     (0x0002)
++#define MCF_EDMA_TCD4_CSR_INT_HALF      (0x0004)
++#define MCF_EDMA_TCD4_CSR_D_REQ         (0x0008)
++#define MCF_EDMA_TCD4_CSR_E_SG          (0x0010)
++#define MCF_EDMA_TCD4_CSR_E_LINK        (0x0020)
++#define MCF_EDMA_TCD4_CSR_ACTIVE        (0x0040)
++#define MCF_EDMA_TCD4_CSR_DONE          (0x0080)
++#define MCF_EDMA_TCD4_CSR_LINKCH(x)     (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD4_CSR_BWC(x)        (((x)&0x0003)<<14)
++
++/* Bit definitions and macros for TCD5_SADDR */
++#define MCF_EDMA_TCD5_SADDR_SADDR(x)    (x)
++
++/* Bit definitions and macros for TCD5_ATTR */
++#define MCF_EDMA_TCD5_ATTR_DSIZE(x)     (((x)&0x0007))
++#define MCF_EDMA_TCD5_ATTR_DMOD(x)      (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD5_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD5_ATTR_SMOD(x)      (((x)&0x001F)<<11)
++
++/* Bit definitions and macros for TCD5_SOFF */
++#define MCF_EDMA_TCD5_SOFF_SOFF(x)      (x)
++
++/* Bit definitions and macros for TCD5_NBYTES */
++#define MCF_EDMA_TCD5_NBYTES_NBYTES(x)      (x)
++
++/* Bit definitions and macros for TCD5_SLAST */
++#define MCF_EDMA_TCD5_SLAST_SLAST(x)    (x)
++
++/* Bit definitions and macros for TCD5_DADDR */
++#define MCF_EDMA_TCD5_DADDR_DADDR(x)    (x)
++
++/* Bit definitions and macros for TCD5_CITER */
++#define MCF_EDMA_TCD5_CITER_CITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD5_CITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD5_CITER_ELINK */
++#define MCF_EDMA_TCD5_CITER_ELINK_CITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD5_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD5_CITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD5_DOFF */
++#define MCF_EDMA_TCD5_DOFF_DOFF(x)      (x)
++
++/* Bit definitions and macros for TCD5_DLAST_SGA */
++#define MCF_EDMA_TCD5_DLAST_SGA_DLAST_SGA(x)    (x)
++
++/* Bit definitions and macros for TCD5_BITER_ELINK */
++#define MCF_EDMA_TCD5_BITER_ELINK_BITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD5_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD5_BITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD5_BITER */
++#define MCF_EDMA_TCD5_BITER_BITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD5_BITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD5_CSR */
++#define MCF_EDMA_TCD5_CSR_START         (0x0001)
++#define MCF_EDMA_TCD5_CSR_INT_MAJOR     (0x0002)
++#define MCF_EDMA_TCD5_CSR_INT_HALF      (0x0004)
++#define MCF_EDMA_TCD5_CSR_D_REQ         (0x0008)
++#define MCF_EDMA_TCD5_CSR_E_SG          (0x0010)
++#define MCF_EDMA_TCD5_CSR_E_LINK        (0x0020)
++#define MCF_EDMA_TCD5_CSR_ACTIVE        (0x0040)
++#define MCF_EDMA_TCD5_CSR_DONE          (0x0080)
++#define MCF_EDMA_TCD5_CSR_LINKCH(x)     (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD5_CSR_BWC(x)        (((x)&0x0003)<<14)
++
++/* Bit definitions and macros for TCD6_SADDR */
++#define MCF_EDMA_TCD6_SADDR_SADDR(x)    (x)
++
++/* Bit definitions and macros for TCD6_ATTR */
++#define MCF_EDMA_TCD6_ATTR_DSIZE(x)     (((x)&0x0007))
++#define MCF_EDMA_TCD6_ATTR_DMOD(x)      (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD6_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD6_ATTR_SMOD(x)      (((x)&0x001F)<<11)
++
++/* Bit definitions and macros for TCD6_SOFF */
++#define MCF_EDMA_TCD6_SOFF_SOFF(x)      (x)
++
++/* Bit definitions and macros for TCD6_NBYTES */
++#define MCF_EDMA_TCD6_NBYTES_NBYTES(x)      (x)
++
++/* Bit definitions and macros for TCD6_SLAST */
++#define MCF_EDMA_TCD6_SLAST_SLAST(x)    (x)
++
++/* Bit definitions and macros for TCD6_DADDR */
++#define MCF_EDMA_TCD6_DADDR_DADDR(x)    (x)
++
++/* Bit definitions and macros for TCD6_CITER */
++#define MCF_EDMA_TCD6_CITER_CITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD6_CITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD6_CITER_ELINK */
++#define MCF_EDMA_TCD6_CITER_ELINK_CITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD6_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD6_CITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD6_DOFF */
++#define MCF_EDMA_TCD6_DOFF_DOFF(x)      (x)
++
++/* Bit definitions and macros for TCD6_DLAST_SGA */
++#define MCF_EDMA_TCD6_DLAST_SGA_DLAST_SGA(x)    (x)
++
++/* Bit definitions and macros for TCD6_BITER_ELINK */
++#define MCF_EDMA_TCD6_BITER_ELINK_BITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD6_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD6_BITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD6_BITER */
++#define MCF_EDMA_TCD6_BITER_BITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD6_BITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD6_CSR */
++#define MCF_EDMA_TCD6_CSR_START         (0x0001)
++#define MCF_EDMA_TCD6_CSR_INT_MAJOR     (0x0002)
++#define MCF_EDMA_TCD6_CSR_INT_HALF      (0x0004)
++#define MCF_EDMA_TCD6_CSR_D_REQ         (0x0008)
++#define MCF_EDMA_TCD6_CSR_E_SG          (0x0010)
++#define MCF_EDMA_TCD6_CSR_E_LINK        (0x0020)
++#define MCF_EDMA_TCD6_CSR_ACTIVE        (0x0040)
++#define MCF_EDMA_TCD6_CSR_DONE          (0x0080)
++#define MCF_EDMA_TCD6_CSR_LINKCH(x)     (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD6_CSR_BWC(x)        (((x)&0x0003)<<14)
++
++/* Bit definitions and macros for TCD7_SADDR */
++#define MCF_EDMA_TCD7_SADDR_SADDR(x)    (x)
++
++/* Bit definitions and macros for TCD7_ATTR */
++#define MCF_EDMA_TCD7_ATTR_DSIZE(x)     (((x)&0x0007))
++#define MCF_EDMA_TCD7_ATTR_DMOD(x)      (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD7_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD7_ATTR_SMOD(x)      (((x)&0x001F)<<11)
++
++/* Bit definitions and macros for TCD7_SOFF */
++#define MCF_EDMA_TCD7_SOFF_SOFF(x)      (x)
++
++/* Bit definitions and macros for TCD7_NBYTES */
++#define MCF_EDMA_TCD7_NBYTES_NBYTES(x)      (x)
++
++/* Bit definitions and macros for TCD7_SLAST */
++#define MCF_EDMA_TCD7_SLAST_SLAST(x)    (x)
++
++/* Bit definitions and macros for TCD7_DADDR */
++#define MCF_EDMA_TCD7_DADDR_DADDR(x)    (x)
++
++/* Bit definitions and macros for TCD7_CITER */
++#define MCF_EDMA_TCD7_CITER_CITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD7_CITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD7_CITER_ELINK */
++#define MCF_EDMA_TCD7_CITER_ELINK_CITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD7_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD7_CITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD7_DOFF */
++#define MCF_EDMA_TCD7_DOFF_DOFF(x)      (x)
++
++/* Bit definitions and macros for TCD7_DLAST_SGA */
++#define MCF_EDMA_TCD7_DLAST_SGA_DLAST_SGA(x)    (x)
++
++/* Bit definitions and macros for TCD7_BITER_ELINK */
++#define MCF_EDMA_TCD7_BITER_ELINK_BITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD7_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD7_BITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD7_BITER */
++#define MCF_EDMA_TCD7_BITER_BITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD7_BITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD7_CSR */
++#define MCF_EDMA_TCD7_CSR_START         (0x0001)
++#define MCF_EDMA_TCD7_CSR_INT_MAJOR     (0x0002)
++#define MCF_EDMA_TCD7_CSR_INT_HALF      (0x0004)
++#define MCF_EDMA_TCD7_CSR_D_REQ         (0x0008)
++#define MCF_EDMA_TCD7_CSR_E_SG          (0x0010)
++#define MCF_EDMA_TCD7_CSR_E_LINK        (0x0020)
++#define MCF_EDMA_TCD7_CSR_ACTIVE        (0x0040)
++#define MCF_EDMA_TCD7_CSR_DONE          (0x0080)
++#define MCF_EDMA_TCD7_CSR_LINKCH(x)     (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD7_CSR_BWC(x)        (((x)&0x0003)<<14)
++
++/* Bit definitions and macros for TCD8_SADDR */
++#define MCF_EDMA_TCD8_SADDR_SADDR(x)    (x)
++
++/* Bit definitions and macros for TCD8_ATTR */
++#define MCF_EDMA_TCD8_ATTR_DSIZE(x)     (((x)&0x0007))
++#define MCF_EDMA_TCD8_ATTR_DMOD(x)      (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD8_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD8_ATTR_SMOD(x)      (((x)&0x001F)<<11)
++
++/* Bit definitions and macros for TCD8_SOFF */
++#define MCF_EDMA_TCD8_SOFF_SOFF(x)      (x)
++
++/* Bit definitions and macros for TCD8_NBYTES */
++#define MCF_EDMA_TCD8_NBYTES_NBYTES(x)      (x)
++
++/* Bit definitions and macros for TCD8_SLAST */
++#define MCF_EDMA_TCD8_SLAST_SLAST(x)    (x)
++
++/* Bit definitions and macros for TCD8_DADDR */
++#define MCF_EDMA_TCD8_DADDR_DADDR(x)    (x)
++
++/* Bit definitions and macros for TCD8_CITER */
++#define MCF_EDMA_TCD8_CITER_CITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD8_CITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD8_CITER_ELINK */
++#define MCF_EDMA_TCD8_CITER_ELINK_CITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD8_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD8_CITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD8_DOFF */
++#define MCF_EDMA_TCD8_DOFF_DOFF(x)      (x)
++
++/* Bit definitions and macros for TCD8_DLAST_SGA */
++#define MCF_EDMA_TCD8_DLAST_SGA_DLAST_SGA(x)    (x)
++
++/* Bit definitions and macros for TCD8_BITER_ELINK */
++#define MCF_EDMA_TCD8_BITER_ELINK_BITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD8_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD8_BITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD8_BITER */
++#define MCF_EDMA_TCD8_BITER_BITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD8_BITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD8_CSR */
++#define MCF_EDMA_TCD8_CSR_START         (0x0001)
++#define MCF_EDMA_TCD8_CSR_INT_MAJOR     (0x0002)
++#define MCF_EDMA_TCD8_CSR_INT_HALF      (0x0004)
++#define MCF_EDMA_TCD8_CSR_D_REQ         (0x0008)
++#define MCF_EDMA_TCD8_CSR_E_SG          (0x0010)
++#define MCF_EDMA_TCD8_CSR_E_LINK        (0x0020)
++#define MCF_EDMA_TCD8_CSR_ACTIVE        (0x0040)
++#define MCF_EDMA_TCD8_CSR_DONE          (0x0080)
++#define MCF_EDMA_TCD8_CSR_LINKCH(x)     (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD8_CSR_BWC(x)        (((x)&0x0003)<<14)
++
++/* Bit definitions and macros for TCD9_SADDR */
++#define MCF_EDMA_TCD9_SADDR_SADDR(x)    (x)
++
++/* Bit definitions and macros for TCD9_ATTR */
++#define MCF_EDMA_TCD9_ATTR_DSIZE(x)     (((x)&0x0007))
++#define MCF_EDMA_TCD9_ATTR_DMOD(x)      (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD9_ATTR_SSIZE(x)     (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD9_ATTR_SMOD(x)      (((x)&0x001F)<<11)
++
++/* Bit definitions and macros for TCD9_SOFF */
++#define MCF_EDMA_TCD9_SOFF_SOFF(x)      (x)
++
++/* Bit definitions and macros for TCD9_NBYTES */
++#define MCF_EDMA_TCD9_NBYTES_NBYTES(x)      (x)
++
++/* Bit definitions and macros for TCD9_SLAST */
++#define MCF_EDMA_TCD9_SLAST_SLAST(x)    (x)
++
++/* Bit definitions and macros for TCD9_DADDR */
++#define MCF_EDMA_TCD9_DADDR_DADDR(x)    (x)
++
++/* Bit definitions and macros for TCD9_CITER_ELINK */
++#define MCF_EDMA_TCD9_CITER_ELINK_CITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD9_CITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD9_CITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD9_CITER */
++#define MCF_EDMA_TCD9_CITER_CITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD9_CITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD9_DOFF */
++#define MCF_EDMA_TCD9_DOFF_DOFF(x)      (x)
++
++/* Bit definitions and macros for TCD9_DLAST_SGA */
++#define MCF_EDMA_TCD9_DLAST_SGA_DLAST_SGA(x)    (x)
++
++/* Bit definitions and macros for TCD9_BITER_ELINK */
++#define MCF_EDMA_TCD9_BITER_ELINK_BITER(x)      (((x)&0x01FF))
++#define MCF_EDMA_TCD9_BITER_ELINK_LINKCH(x)     (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD9_BITER_ELINK_E_LINK        (0x8000)
++
++/* Bit definitions and macros for TCD9_BITER */
++#define MCF_EDMA_TCD9_BITER_BITER(x)    (((x)&0x7FFF))
++#define MCF_EDMA_TCD9_BITER_E_LINK      (0x8000)
++
++/* Bit definitions and macros for TCD9_CSR */
++#define MCF_EDMA_TCD9_CSR_START         (0x0001)
++#define MCF_EDMA_TCD9_CSR_INT_MAJOR     (0x0002)
++#define MCF_EDMA_TCD9_CSR_INT_HALF      (0x0004)
++#define MCF_EDMA_TCD9_CSR_D_REQ         (0x0008)
++#define MCF_EDMA_TCD9_CSR_E_SG          (0x0010)
++#define MCF_EDMA_TCD9_CSR_E_LINK        (0x0020)
++#define MCF_EDMA_TCD9_CSR_ACTIVE        (0x0040)
++#define MCF_EDMA_TCD9_CSR_DONE          (0x0080)
++#define MCF_EDMA_TCD9_CSR_LINKCH(x)     (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD9_CSR_BWC(x)        (((x)&0x0003)<<14)
++
++/* Bit definitions and macros for TCD10_SADDR */
++#define MCF_EDMA_TCD10_SADDR_SADDR(x)   (x)
++
++/* Bit definitions and macros for TCD10_ATTR */
++#define MCF_EDMA_TCD10_ATTR_DSIZE(x)    (((x)&0x0007))
++#define MCF_EDMA_TCD10_ATTR_DMOD(x)     (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD10_ATTR_SSIZE(x)    (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD10_ATTR_SMOD(x)     (((x)&0x001F)<<11)
++
++/* Bit definitions and macros for TCD10_SOFF */
++#define MCF_EDMA_TCD10_SOFF_SOFF(x)     (x)
++
++/* Bit definitions and macros for TCD10_NBYTES */
++#define MCF_EDMA_TCD10_NBYTES_NBYTES(x)     (x)
++
++/* Bit definitions and macros for TCD10_SLAST */
++#define MCF_EDMA_TCD10_SLAST_SLAST(x)   (x)
++
++/* Bit definitions and macros for TCD10_DADDR */
++#define MCF_EDMA_TCD10_DADDR_DADDR(x)   (x)
++
++/* Bit definitions and macros for TCD10_CITER_ELINK */
++#define MCF_EDMA_TCD10_CITER_ELINK_CITER(x)     (((x)&0x01FF))
++#define MCF_EDMA_TCD10_CITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD10_CITER_ELINK_E_LINK       (0x8000)
++
++/* Bit definitions and macros for TCD10_CITER */
++#define MCF_EDMA_TCD10_CITER_CITER(x)   (((x)&0x7FFF))
++#define MCF_EDMA_TCD10_CITER_E_LINK     (0x8000)
++
++/* Bit definitions and macros for TCD10_DOFF */
++#define MCF_EDMA_TCD10_DOFF_DOFF(x)     (x)
++
++/* Bit definitions and macros for TCD10_DLAST_SGA */
++#define MCF_EDMA_TCD10_DLAST_SGA_DLAST_SGA(x)   (x)
++
++/* Bit definitions and macros for TCD10_BITER */
++#define MCF_EDMA_TCD10_BITER_BITER(x)   (((x)&0x7FFF))
++#define MCF_EDMA_TCD10_BITER_E_LINK     (0x8000)
++
++/* Bit definitions and macros for TCD10_BITER_ELINK */
++#define MCF_EDMA_TCD10_BITER_ELINK_BITER(x)     (((x)&0x01FF))
++#define MCF_EDMA_TCD10_BITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD10_BITER_ELINK_E_LINK       (0x8000)
++
++/* Bit definitions and macros for TCD10_CSR */
++#define MCF_EDMA_TCD10_CSR_START        (0x0001)
++#define MCF_EDMA_TCD10_CSR_INT_MAJOR    (0x0002)
++#define MCF_EDMA_TCD10_CSR_INT_HALF     (0x0004)
++#define MCF_EDMA_TCD10_CSR_D_REQ        (0x0008)
++#define MCF_EDMA_TCD10_CSR_E_SG         (0x0010)
++#define MCF_EDMA_TCD10_CSR_E_LINK       (0x0020)
++#define MCF_EDMA_TCD10_CSR_ACTIVE       (0x0040)
++#define MCF_EDMA_TCD10_CSR_DONE         (0x0080)
++#define MCF_EDMA_TCD10_CSR_LINKCH(x)    (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD10_CSR_BWC(x)       (((x)&0x0003)<<14)
++
++/* Bit definitions and macros for TCD11_SADDR */
++#define MCF_EDMA_TCD11_SADDR_SADDR(x)   (x)
++
++/* Bit definitions and macros for TCD11_ATTR */
++#define MCF_EDMA_TCD11_ATTR_DSIZE(x)    (((x)&0x0007))
++#define MCF_EDMA_TCD11_ATTR_DMOD(x)     (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD11_ATTR_SSIZE(x)    (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD11_ATTR_SMOD(x)     (((x)&0x001F)<<11)
++
++/* Bit definitions and macros for TCD11_SOFF */
++#define MCF_EDMA_TCD11_SOFF_SOFF(x)     (x)
++
++/* Bit definitions and macros for TCD11_NBYTES */
++#define MCF_EDMA_TCD11_NBYTES_NBYTES(x)     (x)
++
++/* Bit definitions and macros for TCD11_SLAST */
++#define MCF_EDMA_TCD11_SLAST_SLAST(x)   (x)
++
++/* Bit definitions and macros for TCD11_DADDR */
++#define MCF_EDMA_TCD11_DADDR_DADDR(x)   (x)
++
++/* Bit definitions and macros for TCD11_CITER */
++#define MCF_EDMA_TCD11_CITER_CITER(x)   (((x)&0x7FFF))
++#define MCF_EDMA_TCD11_CITER_E_LINK     (0x8000)
++
++/* Bit definitions and macros for TCD11_CITER_ELINK */
++#define MCF_EDMA_TCD11_CITER_ELINK_CITER(x)     (((x)&0x01FF))
++#define MCF_EDMA_TCD11_CITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD11_CITER_ELINK_E_LINK       (0x8000)
++
++/* Bit definitions and macros for TCD11_DOFF */
++#define MCF_EDMA_TCD11_DOFF_DOFF(x)     (x)
++
++/* Bit definitions and macros for TCD11_DLAST_SGA */
++#define MCF_EDMA_TCD11_DLAST_SGA_DLAST_SGA(x)   (x)
++
++/* Bit definitions and macros for TCD11_BITER */
++#define MCF_EDMA_TCD11_BITER_BITER(x)   (((x)&0x7FFF))
++#define MCF_EDMA_TCD11_BITER_E_LINK     (0x8000)
++
++/* Bit definitions and macros for TCD11_BITER_ELINK */
++#define MCF_EDMA_TCD11_BITER_ELINK_BITER(x)     (((x)&0x01FF))
++#define MCF_EDMA_TCD11_BITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD11_BITER_ELINK_E_LINK       (0x8000)
++
++/* Bit definitions and macros for TCD11_CSR */
++#define MCF_EDMA_TCD11_CSR_START        (0x0001)
++#define MCF_EDMA_TCD11_CSR_INT_MAJOR    (0x0002)
++#define MCF_EDMA_TCD11_CSR_INT_HALF     (0x0004)
++#define MCF_EDMA_TCD11_CSR_D_REQ        (0x0008)
++#define MCF_EDMA_TCD11_CSR_E_SG         (0x0010)
++#define MCF_EDMA_TCD11_CSR_E_LINK       (0x0020)
++#define MCF_EDMA_TCD11_CSR_ACTIVE       (0x0040)
++#define MCF_EDMA_TCD11_CSR_DONE         (0x0080)
++#define MCF_EDMA_TCD11_CSR_LINKCH(x)    (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD11_CSR_BWC(x)       (((x)&0x0003)<<14)
++
++/* Bit definitions and macros for TCD12_SADDR */
++#define MCF_EDMA_TCD12_SADDR_SADDR(x)   (x)
++
++/* Bit definitions and macros for TCD12_ATTR */
++#define MCF_EDMA_TCD12_ATTR_DSIZE(x)    (((x)&0x0007))
++#define MCF_EDMA_TCD12_ATTR_DMOD(x)     (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD12_ATTR_SSIZE(x)    (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD12_ATTR_SMOD(x)     (((x)&0x001F)<<11)
++
++/* Bit definitions and macros for TCD12_SOFF */
++#define MCF_EDMA_TCD12_SOFF_SOFF(x)     (x)
++
++/* Bit definitions and macros for TCD12_NBYTES */
++#define MCF_EDMA_TCD12_NBYTES_NBYTES(x)     (x)
++
++/* Bit definitions and macros for TCD12_SLAST */
++#define MCF_EDMA_TCD12_SLAST_SLAST(x)   (x)
++
++/* Bit definitions and macros for TCD12_DADDR */
++#define MCF_EDMA_TCD12_DADDR_DADDR(x)   (x)
++
++/* Bit definitions and macros for TCD12_CITER */
++#define MCF_EDMA_TCD12_CITER_CITER(x)   (((x)&0x7FFF))
++#define MCF_EDMA_TCD12_CITER_E_LINK     (0x8000)
++
++/* Bit definitions and macros for TCD12_CITER_ELINK */
++#define MCF_EDMA_TCD12_CITER_ELINK_CITER(x)     (((x)&0x01FF))
++#define MCF_EDMA_TCD12_CITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD12_CITER_ELINK_E_LINK       (0x8000)
++
++/* Bit definitions and macros for TCD12_DOFF */
++#define MCF_EDMA_TCD12_DOFF_DOFF(x)     (x)
++
++/* Bit definitions and macros for TCD12_DLAST_SGA */
++#define MCF_EDMA_TCD12_DLAST_SGA_DLAST_SGA(x)   (x)
++
++/* Bit definitions and macros for TCD12_BITER */
++#define MCF_EDMA_TCD12_BITER_BITER(x)   (((x)&0x7FFF))
++#define MCF_EDMA_TCD12_BITER_E_LINK     (0x8000)
++
++/* Bit definitions and macros for TCD12_BITER_ELINK */
++#define MCF_EDMA_TCD12_BITER_ELINK_BITER(x)     (((x)&0x01FF))
++#define MCF_EDMA_TCD12_BITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD12_BITER_ELINK_E_LINK       (0x8000)
++
++/* Bit definitions and macros for TCD12_CSR */
++#define MCF_EDMA_TCD12_CSR_START        (0x0001)
++#define MCF_EDMA_TCD12_CSR_INT_MAJOR    (0x0002)
++#define MCF_EDMA_TCD12_CSR_INT_HALF     (0x0004)
++#define MCF_EDMA_TCD12_CSR_D_REQ        (0x0008)
++#define MCF_EDMA_TCD12_CSR_E_SG         (0x0010)
++#define MCF_EDMA_TCD12_CSR_E_LINK       (0x0020)
++#define MCF_EDMA_TCD12_CSR_ACTIVE       (0x0040)
++#define MCF_EDMA_TCD12_CSR_DONE         (0x0080)
++#define MCF_EDMA_TCD12_CSR_LINKCH(x)    (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD12_CSR_BWC(x)       (((x)&0x0003)<<14)
++
++/* Bit definitions and macros for TCD13_SADDR */
++#define MCF_EDMA_TCD13_SADDR_SADDR(x)   (x)
++
++/* Bit definitions and macros for TCD13_ATTR */
++#define MCF_EDMA_TCD13_ATTR_DSIZE(x)    (((x)&0x0007))
++#define MCF_EDMA_TCD13_ATTR_DMOD(x)     (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD13_ATTR_SSIZE(x)    (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD13_ATTR_SMOD(x)     (((x)&0x001F)<<11)
++
++/* Bit definitions and macros for TCD13_SOFF */
++#define MCF_EDMA_TCD13_SOFF_SOFF(x)     (x)
++
++/* Bit definitions and macros for TCD13_NBYTES */
++#define MCF_EDMA_TCD13_NBYTES_NBYTES(x)     (x)
++
++/* Bit definitions and macros for TCD13_SLAST */
++#define MCF_EDMA_TCD13_SLAST_SLAST(x)   (x)
++
++/* Bit definitions and macros for TCD13_DADDR */
++#define MCF_EDMA_TCD13_DADDR_DADDR(x)   (x)
++
++/* Bit definitions and macros for TCD13_CITER_ELINK */
++#define MCF_EDMA_TCD13_CITER_ELINK_CITER(x)     (((x)&0x01FF))
++#define MCF_EDMA_TCD13_CITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD13_CITER_ELINK_E_LINK       (0x8000)
++
++/* Bit definitions and macros for TCD13_CITER */
++#define MCF_EDMA_TCD13_CITER_CITER(x)   (((x)&0x7FFF))
++#define MCF_EDMA_TCD13_CITER_E_LINK     (0x8000)
++
++/* Bit definitions and macros for TCD13_DOFF */
++#define MCF_EDMA_TCD13_DOFF_DOFF(x)     (x)
++
++/* Bit definitions and macros for TCD13_DLAST_SGA */
++#define MCF_EDMA_TCD13_DLAST_SGA_DLAST_SGA(x)   (x)
++
++/* Bit definitions and macros for TCD13_BITER_ELINK */
++#define MCF_EDMA_TCD13_BITER_ELINK_BITER(x)     (((x)&0x01FF))
++#define MCF_EDMA_TCD13_BITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD13_BITER_ELINK_E_LINK       (0x8000)
++
++/* Bit definitions and macros for TCD13_BITER */
++#define MCF_EDMA_TCD13_BITER_BITER(x)   (((x)&0x7FFF))
++#define MCF_EDMA_TCD13_BITER_E_LINK     (0x8000)
++
++/* Bit definitions and macros for TCD13_CSR */
++#define MCF_EDMA_TCD13_CSR_START        (0x0001)
++#define MCF_EDMA_TCD13_CSR_INT_MAJOR    (0x0002)
++#define MCF_EDMA_TCD13_CSR_INT_HALF     (0x0004)
++#define MCF_EDMA_TCD13_CSR_D_REQ        (0x0008)
++#define MCF_EDMA_TCD13_CSR_E_SG         (0x0010)
++#define MCF_EDMA_TCD13_CSR_E_LINK       (0x0020)
++#define MCF_EDMA_TCD13_CSR_ACTIVE       (0x0040)
++#define MCF_EDMA_TCD13_CSR_DONE         (0x0080)
++#define MCF_EDMA_TCD13_CSR_LINKCH(x)    (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD13_CSR_BWC(x)       (((x)&0x0003)<<14)
++
++/* Bit definitions and macros for TCD14_SADDR */
++#define MCF_EDMA_TCD14_SADDR_SADDR(x)   (x)
++
++/* Bit definitions and macros for TCD14_ATTR */
++#define MCF_EDMA_TCD14_ATTR_DSIZE(x)    (((x)&0x0007))
++#define MCF_EDMA_TCD14_ATTR_DMOD(x)     (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD14_ATTR_SSIZE(x)    (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD14_ATTR_SMOD(x)     (((x)&0x001F)<<11)
++
++/* Bit definitions and macros for TCD14_SOFF */
++#define MCF_EDMA_TCD14_SOFF_SOFF(x)     (x)
++
++/* Bit definitions and macros for TCD14_NBYTES */
++#define MCF_EDMA_TCD14_NBYTES_NBYTES(x)     (x)
++
++/* Bit definitions and macros for TCD14_SLAST */
++#define MCF_EDMA_TCD14_SLAST_SLAST(x)   (x)
++
++/* Bit definitions and macros for TCD14_DADDR */
++#define MCF_EDMA_TCD14_DADDR_DADDR(x)   (x)
++
++/* Bit definitions and macros for TCD14_CITER */
++#define MCF_EDMA_TCD14_CITER_CITER(x)   (((x)&0x7FFF))
++#define MCF_EDMA_TCD14_CITER_E_LINK     (0x8000)
++
++/* Bit definitions and macros for TCD14_CITER_ELINK */
++#define MCF_EDMA_TCD14_CITER_ELINK_CITER(x)     (((x)&0x01FF))
++#define MCF_EDMA_TCD14_CITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD14_CITER_ELINK_E_LINK       (0x8000)
++
++/* Bit definitions and macros for TCD14_DOFF */
++#define MCF_EDMA_TCD14_DOFF_DOFF(x)     (x)
++
++/* Bit definitions and macros for TCD14_DLAST_SGA */
++#define MCF_EDMA_TCD14_DLAST_SGA_DLAST_SGA(x)   (x)
++
++/* Bit definitions and macros for TCD14_BITER_ELINK */
++#define MCF_EDMA_TCD14_BITER_ELINK_BITER(x)     (((x)&0x01FF))
++#define MCF_EDMA_TCD14_BITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD14_BITER_ELINK_E_LINK       (0x8000)
++
++/* Bit definitions and macros for TCD14_BITER */
++#define MCF_EDMA_TCD14_BITER_BITER(x)   (((x)&0x7FFF))
++#define MCF_EDMA_TCD14_BITER_E_LINK     (0x8000)
++
++/* Bit definitions and macros for TCD14_CSR */
++#define MCF_EDMA_TCD14_CSR_START        (0x0001)
++#define MCF_EDMA_TCD14_CSR_INT_MAJOR    (0x0002)
++#define MCF_EDMA_TCD14_CSR_INT_HALF     (0x0004)
++#define MCF_EDMA_TCD14_CSR_D_REQ        (0x0008)
++#define MCF_EDMA_TCD14_CSR_E_SG         (0x0010)
++#define MCF_EDMA_TCD14_CSR_E_LINK       (0x0020)
++#define MCF_EDMA_TCD14_CSR_ACTIVE       (0x0040)
++#define MCF_EDMA_TCD14_CSR_DONE         (0x0080)
++#define MCF_EDMA_TCD14_CSR_LINKCH(x)    (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD14_CSR_BWC(x)       (((x)&0x0003)<<14)
++
++/* Bit definitions and macros for TCD15_SADDR */
++#define MCF_EDMA_TCD15_SADDR_SADDR(x)   (x)
++
++/* Bit definitions and macros for TCD15_ATTR */
++#define MCF_EDMA_TCD15_ATTR_DSIZE(x)    (((x)&0x0007))
++#define MCF_EDMA_TCD15_ATTR_DMOD(x)     (((x)&0x001F)<<3)
++#define MCF_EDMA_TCD15_ATTR_SSIZE(x)    (((x)&0x0007)<<8)
++#define MCF_EDMA_TCD15_ATTR_SMOD(x)     (((x)&0x001F)<<11)
++
++/* Bit definitions and macros for TCD15_SOFF */
++#define MCF_EDMA_TCD15_SOFF_SOFF(x)     (x)
++
++/* Bit definitions and macros for TCD15_NBYTES */
++#define MCF_EDMA_TCD15_NBYTES_NBYTES(x)     (x)
++
++/* Bit definitions and macros for TCD15_SLAST */
++#define MCF_EDMA_TCD15_SLAST_SLAST(x)   (x)
++
++/* Bit definitions and macros for TCD15_DADDR */
++#define MCF_EDMA_TCD15_DADDR_DADDR(x)   (x)
++
++/* Bit definitions and macros for TCD15_CITER_ELINK */
++#define MCF_EDMA_TCD15_CITER_ELINK_CITER(x)     (((x)&0x01FF))
++#define MCF_EDMA_TCD15_CITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD15_CITER_ELINK_E_LINK       (0x8000)
++
++/* Bit definitions and macros for TCD15_CITER */
++#define MCF_EDMA_TCD15_CITER_CITER(x)   (((x)&0x7FFF))
++#define MCF_EDMA_TCD15_CITER_E_LINK     (0x8000)
++
++/* Bit definitions and macros for TCD15_DOFF */
++#define MCF_EDMA_TCD15_DOFF_DOFF(x)     (x)
++
++/* Bit definitions and macros for TCD15_DLAST_SGA */
++#define MCF_EDMA_TCD15_DLAST_SGA_DLAST_SGA(x)   (x)
++
++/* Bit definitions and macros for TCD15_BITER */
++#define MCF_EDMA_TCD15_BITER_BITER(x)   (((x)&0x7FFF))
++#define MCF_EDMA_TCD15_BITER_E_LINK     (0x8000)
++
++/* Bit definitions and macros for TCD15_BITER_ELINK */
++#define MCF_EDMA_TCD15_BITER_ELINK_BITER(x)     (((x)&0x01FF))
++#define MCF_EDMA_TCD15_BITER_ELINK_LINKCH(x)    (((x)&0x003F)<<9)
++#define MCF_EDMA_TCD15_BITER_ELINK_E_LINK       (0x8000)
++
++/* Bit definitions and macros for TCD15_CSR */
++#define MCF_EDMA_TCD15_CSR_START        (0x0001)
++#define MCF_EDMA_TCD15_CSR_INT_MAJOR    (0x0002)
++#define MCF_EDMA_TCD15_CSR_INT_HALF     (0x0004)
++#define MCF_EDMA_TCD15_CSR_D_REQ        (0x0008)
++#define MCF_EDMA_TCD15_CSR_E_SG         (0x0010)
++#define MCF_EDMA_TCD15_CSR_E_LINK       (0x0020)
++#define MCF_EDMA_TCD15_CSR_ACTIVE       (0x0040)
++#define MCF_EDMA_TCD15_CSR_DONE         (0x0080)
++#define MCF_EDMA_TCD15_CSR_LINKCH(x)    (((x)&0x003F)<<8)
++#define MCF_EDMA_TCD15_CSR_BWC(x)       (((x)&0x0003)<<14)
++
++/********************************************************************/
++
++#endif /* __MCF5445X_EDMA_H__ */
+--- /dev/null
++++ b/include/asm-m68k/mcf5445x_eport.h
+@@ -0,0 +1,117 @@
++/*
++ * Kurt Mahan kmahan@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __MCF5445X_EPORT_H__
++#define __MCF5445X_EPORT_H__
++
++/*********************************************************************
++*
++* Edge Port Module (EPORT)
++*
++*********************************************************************/
++
++/* Register read/write macros */
++#define MCF_EPORT_EPPAR         MCF_REG16(0xFC094000)
++#define MCF_EPORT_EPDDR         MCF_REG08(0xFC094002)
++#define MCF_EPORT_EPIER         MCF_REG08(0xFC094003)
++#define MCF_EPORT_EPDR          MCF_REG08(0xFC094004)
++#define MCF_EPORT_EPPDR         MCF_REG08(0xFC094005)
++#define MCF_EPORT_EPFR          MCF_REG08(0xFC094006)
++
++/* Bit definitions and macros for EPPAR */
++#define MCF_EPORT_EPPAR_EPPA1(x)        (((x)&0x0003)<<2)
++#define MCF_EPORT_EPPAR_EPPA2(x)        (((x)&0x0003)<<4)
++#define MCF_EPORT_EPPAR_EPPA3(x)        (((x)&0x0003)<<6)
++#define MCF_EPORT_EPPAR_EPPA4(x)        (((x)&0x0003)<<8)
++#define MCF_EPORT_EPPAR_EPPA5(x)        (((x)&0x0003)<<10)
++#define MCF_EPORT_EPPAR_EPPA6(x)        (((x)&0x0003)<<12)
++#define MCF_EPORT_EPPAR_EPPA7(x)        (((x)&0x0003)<<14)
++#define MCF_EPORT_EPPAR_LEVEL           (0)
++#define MCF_EPORT_EPPAR_RISING          (1)
++#define MCF_EPORT_EPPAR_FALLING         (2)
++#define MCF_EPORT_EPPAR_BOTH            (3)
++#define MCF_EPORT_EPPAR_EPPA7_LEVEL     (0x0000)
++#define MCF_EPORT_EPPAR_EPPA7_RISING    (0x4000)
++#define MCF_EPORT_EPPAR_EPPA7_FALLING   (0x8000)
++#define MCF_EPORT_EPPAR_EPPA7_BOTH      (0xC000)
++#define MCF_EPORT_EPPAR_EPPA6_LEVEL     (0x0000)
++#define MCF_EPORT_EPPAR_EPPA6_RISING    (0x1000)
++#define MCF_EPORT_EPPAR_EPPA6_FALLING   (0x2000)
++#define MCF_EPORT_EPPAR_EPPA6_BOTH      (0x3000)
++#define MCF_EPORT_EPPAR_EPPA5_LEVEL     (0x0000)
++#define MCF_EPORT_EPPAR_EPPA5_RISING    (0x0400)
++#define MCF_EPORT_EPPAR_EPPA5_FALLING   (0x0800)
++#define MCF_EPORT_EPPAR_EPPA5_BOTH      (0x0C00)
++#define MCF_EPORT_EPPAR_EPPA4_LEVEL     (0x0000)
++#define MCF_EPORT_EPPAR_EPPA4_RISING    (0x0100)
++#define MCF_EPORT_EPPAR_EPPA4_FALLING   (0x0200)
++#define MCF_EPORT_EPPAR_EPPA4_BOTH      (0x0300)
++#define MCF_EPORT_EPPAR_EPPA3_LEVEL     (0x0000)
++#define MCF_EPORT_EPPAR_EPPA3_RISING    (0x0040)
++#define MCF_EPORT_EPPAR_EPPA3_FALLING   (0x0080)
++#define MCF_EPORT_EPPAR_EPPA3_BOTH      (0x00C0)
++#define MCF_EPORT_EPPAR_EPPA2_LEVEL     (0x0000)
++#define MCF_EPORT_EPPAR_EPPA2_RISING    (0x0010)
++#define MCF_EPORT_EPPAR_EPPA2_FALLING   (0x0020)
++#define MCF_EPORT_EPPAR_EPPA2_BOTH      (0x0030)
++#define MCF_EPORT_EPPAR_EPPA1_LEVEL     (0x0000)
++#define MCF_EPORT_EPPAR_EPPA1_RISING    (0x0004)
++#define MCF_EPORT_EPPAR_EPPA1_FALLING   (0x0008)
++#define MCF_EPORT_EPPAR_EPPA1_BOTH      (0x000C)
++
++/* Bit definitions and macros for EPDDR */
++#define MCF_EPORT_EPDDR_EPDD1   (0x02)
++#define MCF_EPORT_EPDDR_EPDD2   (0x04)
++#define MCF_EPORT_EPDDR_EPDD3   (0x08)
++#define MCF_EPORT_EPDDR_EPDD4   (0x10)
++#define MCF_EPORT_EPDDR_EPDD5   (0x20)
++#define MCF_EPORT_EPDDR_EPDD6   (0x40)
++#define MCF_EPORT_EPDDR_EPDD7   (0x80)
++
++/* Bit definitions and macros for EPIER */
++#define MCF_EPORT_EPIER_EPIE1   (0x02)
++#define MCF_EPORT_EPIER_EPIE2   (0x04)
++#define MCF_EPORT_EPIER_EPIE3   (0x08)
++#define MCF_EPORT_EPIER_EPIE4   (0x10)
++#define MCF_EPORT_EPIER_EPIE5   (0x20)
++#define MCF_EPORT_EPIER_EPIE6   (0x40)
++#define MCF_EPORT_EPIER_EPIE7   (0x80)
++
++/* Bit definitions and macros for EPDR */
++#define MCF_EPORT_EPDR_EPD1     (0x02)
++#define MCF_EPORT_EPDR_EPD2     (0x04)
++#define MCF_EPORT_EPDR_EPD3     (0x08)
++#define MCF_EPORT_EPDR_EPD4     (0x10)
++#define MCF_EPORT_EPDR_EPD5     (0x20)
++#define MCF_EPORT_EPDR_EPD6     (0x40)
++#define MCF_EPORT_EPDR_EPD7     (0x80)
++
++/* Bit definitions and macros for EPPDR */
++#define MCF_EPORT_EPPDR_EPPD1   (0x02)
++#define MCF_EPORT_EPPDR_EPPD2   (0x04)
++#define MCF_EPORT_EPPDR_EPPD3   (0x08)
++#define MCF_EPORT_EPPDR_EPPD4   (0x10)
++#define MCF_EPORT_EPPDR_EPPD5   (0x20)
++#define MCF_EPORT_EPPDR_EPPD6   (0x40)
++#define MCF_EPORT_EPPDR_EPPD7   (0x80)
++
++/* Bit definitions and macros for EPFR */
++#define MCF_EPORT_EPFR_EPF1     (0x02)
++#define MCF_EPORT_EPFR_EPF2     (0x04)
++#define MCF_EPORT_EPFR_EPF3     (0x08)
++#define MCF_EPORT_EPFR_EPF4     (0x10)
++#define MCF_EPORT_EPFR_EPF5     (0x20)
++#define MCF_EPORT_EPFR_EPF6     (0x40)
++#define MCF_EPORT_EPFR_EPF7     (0x80)
++
++/********************************************************************/
++
++#endif /* __MCF5445X_EPORT_H__ */
+--- /dev/null
++++ b/include/asm-m68k/mcf5445x_fbcs.h
+@@ -0,0 +1,182 @@
++/*
++ * Matt Waddel Matt.Waddel@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __MCF5445X_FBCS_H__
++#define __MCF5445X_FBCS_H__
++
++/*********************************************************************
++*
++* FlexBus Chip Selects (FBCS)
++*
++*********************************************************************/
++
++/* Register read/write macros */
++#define MCF_FBCS_CSAR0	MCF_REG32(0xFC008000)   /* Chip-select Addr Register */
++#define MCF_FBCS_CSMR0	MCF_REG32(0xFC008004)   /* Chip-select Mask Register */
++#define MCF_FBCS_CSCR0	MCF_REG32(0xFC008008)   /* Chip-select Cntl Register */
++#define MCF_FBCS_CSAR1	MCF_REG32(0xFC00800C)   /* Chip-select Addr Register */
++#define MCF_FBCS_CSMR1	MCF_REG32(0xFC008010)   /* Chip-select Mask Register */
++#define MCF_FBCS_CSCR1	MCF_REG32(0xFC008014)   /* Chip-select Cntl Register */
++#define MCF_FBCS_CSAR2	MCF_REG32(0xFC008018)   /* Chip-select Addr Register */
++#define MCF_FBCS_CSMR2	MCF_REG32(0xFC00801C)   /* Chip-select Mask Register */
++#define MCF_FBCS_CSCR2	MCF_REG32(0xFC008020)   /* Chip-select Cntl Register */
++#define MCF_FBCS_CSAR3	MCF_REG32(0xFC008024)   /* Chip-select Addr Register */
++#define MCF_FBCS_CSMR3	MCF_REG32(0xFC008028)   /* Chip-select Mask Register */
++#define MCF_FBCS_CSCR3	MCF_REG32(0xFC00802C)   /* Chip-select Cntl Register */
++
++/* Parameterized register read/write macros for multiple registers */
++#define MCF_FBCS_CSAR(x)	MCF_REG32(0xFC008000+((x)*0x00C))   /* Chip-select Addr Register */
++#define MCF_FBCS_CSMR(x)	MCF_REG32(0xFC008004+((x)*0x00C))   /* Chip-select Mask Register */
++#define MCF_FBCS_CSCR(x)	MCF_REG32(0xFC008008+((x)*0x00C))   /* Chip-select Cntl Register */
++
++/* Bit definitions and macros for CSAR group */
++#define MCF_FBCS_CSAR_BA(x)     ((x)&0xFFFF0000)
++
++/* Bit definitions and macros for CSAR0 */
++#define MCF_FBCS_CSAR0_BA(x)    ((x)&0xFFFF0000)
++
++/* Bit definitions and macros for CSMR group */
++#define MCF_FBCS_CSMR_V             (0x00000001)            /* Valid bit */
++#define MCF_FBCS_CSMR_WP            (0x00000100)            /* Write protect */
++#define MCF_FBCS_CSMR_BAM(x)        (((x)&0x0000FFFF)<<16)  /* Base addr mask */
++#define MCF_FBCS_CSMR_BAM_4G        (0xFFFF0000)
++#define MCF_FBCS_CSMR_BAM_2G        (0x7FFF0000)
++#define MCF_FBCS_CSMR_BAM_1G        (0x3FFF0000)
++#define MCF_FBCS_CSMR_BAM_1024M     (0x3FFF0000)
++#define MCF_FBCS_CSMR_BAM_512M      (0x1FFF0000)
++#define MCF_FBCS_CSMR_BAM_256M      (0x0FFF0000)
++#define MCF_FBCS_CSMR_BAM_128M      (0x07FF0000)
++#define MCF_FBCS_CSMR_BAM_64M       (0x03FF0000)
++#define MCF_FBCS_CSMR_BAM_32M       (0x01FF0000)
++#define MCF_FBCS_CSMR_BAM_16M       (0x00FF0000)
++#define MCF_FBCS_CSMR_BAM_8M        (0x007F0000)
++#define MCF_FBCS_CSMR_BAM_4M        (0x003F0000)
++#define MCF_FBCS_CSMR_BAM_2M        (0x001F0000)
++#define MCF_FBCS_CSMR_BAM_1M        (0x000F0000)
++#define MCF_FBCS_CSMR_BAM_1024K     (0x000F0000)
++#define MCF_FBCS_CSMR_BAM_512K      (0x00070000)
++#define MCF_FBCS_CSMR_BAM_256K      (0x00030000)
++#define MCF_FBCS_CSMR_BAM_128K      (0x00010000)
++#define MCF_FBCS_CSMR_BAM_64K       (0x00000000)
++
++/* Bit definitions and macros for CSMR0 */
++#define MCF_FBCS_CSMR0_V            (0x00000001)            /* Valid bit */
++#define MCF_FBCS_CSMR0_WP           (0x00000100)            /* Write protect */
++#define MCF_FBCS_CSMR0_BAM(x)       (((x)&0x0000FFFF)<<16)  /* Base addr mask */
++#define MCF_FBCS_CSMR0_BAM_4G       (0xFFFF0000)
++#define MCF_FBCS_CSMR0_BAM_2G       (0x7FFF0000)
++#define MCF_FBCS_CSMR0_BAM_1G       (0x3FFF0000)
++#define MCF_FBCS_CSMR0_BAM_1024M    (0x3FFF0000)
++#define MCF_FBCS_CSMR0_BAM_512M     (0x1FFF0000)
++#define MCF_FBCS_CSMR0_BAM_256M     (0x0FFF0000)
++#define MCF_FBCS_CSMR0_BAM_128M     (0x07FF0000)
++#define MCF_FBCS_CSMR0_BAM_64M      (0x03FF0000)
++#define MCF_FBCS_CSMR0_BAM_32M      (0x01FF0000)
++#define MCF_FBCS_CSMR0_BAM_16M      (0x00FF0000)
++#define MCF_FBCS_CSMR0_BAM_8M       (0x007F0000)
++#define MCF_FBCS_CSMR0_BAM_4M       (0x003F0000)
++#define MCF_FBCS_CSMR0_BAM_2M       (0x001F0000)
++#define MCF_FBCS_CSMR0_BAM_1M       (0x000F0000)
++#define MCF_FBCS_CSMR0_BAM_1024K    (0x000F0000)
++#define MCF_FBCS_CSMR0_BAM_512K     (0x00070000)
++#define MCF_FBCS_CSMR0_BAM_256K     (0x00030000)
++#define MCF_FBCS_CSMR0_BAM_128K     (0x00010000)
++#define MCF_FBCS_CSMR0_BAM_64K      (0x00000000)
++
++/* Bit definitions and macros for CSCR group */
++#define MCF_FBCS_CSCR_BSTW      (0x00000008)            /* Burst-write enable */
++#define MCF_FBCS_CSCR_BSTR      (0x00000010)            /* Burst-read enable */
++#define MCF_FBCS_CSCR_BEM       (0x00000020)            /* Byte-enable mode */
++#define MCF_FBCS_CSCR_PS(x)     (((x)&0x00000003)<<6)   /* Port size */
++#define MCF_FBCS_CSCR_AA        (0x00000100)            /* Auto-acknowledge */
++#define MCF_FBCS_CSCR_WS(x)     (((x)&0x0000003F)<<10)  /* Wait states */
++#define MCF_FBCS_CSCR_WRAH(x)   (((x)&0x00000003)<<16)  /* Write address hold or deselect */
++#define MCF_FBCS_CSCR_RDAH(x)   (((x)&0x00000003)<<18)  /* Read address hold or deselect */
++#define MCF_FBCS_CSCR_ASET(x)   (((x)&0x00000003)<<20)  /* Address setup */
++#define MCF_FBCS_CSCR_SWSEN     (0x00800000)            /* Secondary wait state enable */
++#define MCF_FBCS_CSCR_SWS(x)    (((x)&0x0000003F)<<26)  /* Secondary wait states */
++#define MCF_FBCS_CSCR_PS_8      (0x00000040)
++#define MCF_FBCS_CSCR_PS_16     (0x00000080)
++#define MCF_FBCS_CSCR_PS_32     (0x00000000)
++
++/* Bit definitions and macros for CSCR0 */
++#define MCF_FBCS_CSCR0_BSTW	(0x00000008)            /* Burst-write enable */
++#define MCF_FBCS_CSCR0_BSTR	(0x00000010)            /* Burst-read enable */
++#define MCF_FBCS_CSCR0_BEM	(0x00000020)            /* Byte-enable mode */
++#define MCF_FBCS_CSCR0_PS(x)	(((x)&0x00000003)<<6)   /* Port size */
++#define MCF_FBCS_CSCR0_AA	(0x00000100)            /* Auto-acknowledge */
++#define MCF_FBCS_CSCR0_WS(x)	(((x)&0x0000003F)<<10)  /* Wait states */
++#define MCF_FBCS_CSCR0_WRAH(x)	(((x)&0x00000003)<<16)  /* Write address hold or deselect */
++#define MCF_FBCS_CSCR0_RDAH(x)	(((x)&0x00000003)<<18)  /* Read address hold or deselect */
++#define MCF_FBCS_CSCR0_ASET(x)	(((x)&0x00000003)<<20)  /* Address setup */
++#define MCF_FBCS_CSCR0_SWSEN	(0x00800000)            /* Secondary wait state enable */
++#define MCF_FBCS_CSCR0_SWS(x)	(((x)&0x0000003F)<<26)  /* Secondary wait states */
++#define MCF_FBCS_CSCR0_PS_8	(0x00000040)
++#define MCF_FBCS_CSCR0_PS_16	(0x00000080)
++#define MCF_FBCS_CSCR0_PS_32	(0x00000000)
++
++/* Bit definitions and macros for CSMR1 */
++#define MCF_FBCS_CSMR1_V	(0x00000001)            /* Valid bit */
++#define MCF_FBCS_CSMR1_WP	(0x00000100)            /* Write protect */
++#define MCF_FBCS_CSMR1_BAM(x)	(((x)&0x0000FFFF)<<16)  /* Base address mask */
++
++/* Bit definitions and macros for CSCR1 */
++#define MCF_FBCS_CSCR1_BSTW	(0x00000008)            /* Burst-write enable */
++#define MCF_FBCS_CSCR1_BSTR	(0x00000010)            /* Burst-read enable */
++#define MCF_FBCS_CSCR1_BEM	(0x00000020)            /* Byte-enable mode */
++#define MCF_FBCS_CSCR1_PS(x)	(((x)&0x00000003)<<6)   /* Port size */
++#define MCF_FBCS_CSCR1_AA	(0x00000100)            /* Auto-acknowledge */
++#define MCF_FBCS_CSCR1_WS(x)	(((x)&0x0000003F)<<10)  /* Wait states */
++#define MCF_FBCS_CSCR1_WRAH(x)	(((x)&0x00000003)<<16)  /* Write address hold or deselect */
++#define MCF_FBCS_CSCR1_RDAH(x)	(((x)&0x00000003)<<18)  /* Read address hold or deselect */
++#define MCF_FBCS_CSCR1_ASET(x)	(((x)&0x00000003)<<20)  /* Address setup */
++#define MCF_FBCS_CSCR1_SWSEN	(0x00800000)            /* Secondary wait state enable */
++#define MCF_FBCS_CSCR1_SWS(x)	(((x)&0x0000003F)<<26)  /* Secondary wait states */
++
++/* Bit definitions and macros for CSMR2 */
++#define MCF_FBCS_CSMR2_V	(0x00000001)            /* Valid bit */
++#define MCF_FBCS_CSMR2_WP	(0x00000100)            /* Write protect */
++#define MCF_FBCS_CSMR2_BAM(x)	(((x)&0x0000FFFF)<<16)  /* Base address mask */
++
++/* Bit definitions and macros for CSCR2 */
++#define MCF_FBCS_CSCR2_BSTW	(0x00000008)            /* Burst-write enable */
++#define MCF_FBCS_CSCR2_BSTR	(0x00000010)            /* Burst-read enable */
++#define MCF_FBCS_CSCR2_BEM	(0x00000020)            /* Byte-enable mode */
++#define MCF_FBCS_CSCR2_PS(x)	(((x)&0x00000003)<<6)   /* Port size */
++#define MCF_FBCS_CSCR2_AA	(0x00000100)            /* Auto-acknowledge */
++#define MCF_FBCS_CSCR2_WS(x)	(((x)&0x0000003F)<<10)  /* Wait states */
++#define MCF_FBCS_CSCR2_WRAH(x)	(((x)&0x00000003)<<16)  /* Write address hold or deselect */
++#define MCF_FBCS_CSCR2_RDAH(x)	(((x)&0x00000003)<<18)  /* Read address hold or deselect */
++#define MCF_FBCS_CSCR2_ASET(x)	(((x)&0x00000003)<<20)  /* Address setup */
++#define MCF_FBCS_CSCR2_SWSEN	(0x00800000)            /* Secondary wait state enable */
++#define MCF_FBCS_CSCR2_SWS(x)	(((x)&0x0000003F)<<26)  /* Secondary wait states */
++
++/* Bit definitions and macros for CSMR3 */
++#define MCF_FBCS_CSMR3_V	(0x00000001)            /* Valid bit */
++#define MCF_FBCS_CSMR3_WP	(0x00000100)            /* Write protect */
++#define MCF_FBCS_CSMR3_BAM(x)	(((x)&0x0000FFFF)<<16)  /* Base address mask */
++
++/* Bit definitions and macros for CSCR3 */
++#define MCF_FBCS_CSCR3_BSTW	(0x00000008)            /* Burst-write enable */
++#define MCF_FBCS_CSCR3_BSTR	(0x00000010)            /* Burst-read enable */
++#define MCF_FBCS_CSCR3_BEM	(0x00000020)            /* Byte-enable mode */
++#define MCF_FBCS_CSCR3_PS(x)	(((x)&0x00000003)<<6)   /* Port size */
++#define MCF_FBCS_CSCR3_AA	(0x00000100)            /* Auto-acknowledge */
++#define MCF_FBCS_CSCR3_WS(x)	(((x)&0x0000003F)<<10)  /* Wait states */
++#define MCF_FBCS_CSCR3_WRAH(x)	(((x)&0x00000003)<<16)  /* Write address hold or deselect */
++#define MCF_FBCS_CSCR3_RDAH(x)	(((x)&0x00000003)<<18)  /* Read address hold or deselect */
++#define MCF_FBCS_CSCR3_ASET(x)	(((x)&0x00000003)<<20)  /* Address setup */
++#define MCF_FBCS_CSCR3_SWSEN	(0x00800000)            /* Secondary wait state enable */
++#define MCF_FBCS_CSCR3_SWS(x)	(((x)&0x0000003F)<<26)  /* Secondary wait states */
++
++/********************************************************************/
++
++#endif /* __MCF5445X_FBCS_H__ */
+--- /dev/null
++++ b/include/asm-m68k/mcf5445x_gpio.h
+@@ -0,0 +1,1257 @@
++/*
++ * Matt Waddel Matt.Waddel@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __MCF5445X_GPIO_H__
++#define __MCF5445X_GPIO_H__
++
++/*********************************************************************
++*
++* General Purpose I/O Module (GPIO)
++*
++*********************************************************************/
++
++/* Register read/write macros */
++#define MCF_GPIO_PODR_FEC0H	MCF_REG08(0xFC0A4000)	/* FEC0 High Port Output Data Register */
++#define MCF_GPIO_PODR_FEC0L	MCF_REG08(0xFC0A4001)	/* FEC0 Low Port Output Data Register */
++#define MCF_GPIO_PODR_SSI	MCF_REG08(0xFC0A4002)	/* SSI Port Output Data Register */
++#define MCF_GPIO_PODR_FBCTL	MCF_REG08(0xFC0A4003)	/* Flexbus Control Port Output Data Register */
++#define MCF_GPIO_PODR_BE	MCF_REG08(0xFC0A4004)	/* Flexbus Byte Enable Port Output Data Register */
++#define MCF_GPIO_PODR_CS	MCF_REG08(0xFC0A4005)	/* Flexbus Chip-Select Port Output Data Register */
++#define MCF_GPIO_PODR_DMA	MCF_REG08(0xFC0A4006)	/* DMA Port Output Data Register */
++#define MCF_GPIO_PODR_FECI2C	MCF_REG08(0xFC0A4007)	/* FEC1 / I2C Port Output Data Register */
++#define MCF_GPIO_PODR_UART	MCF_REG08(0xFC0A4009)	/* UART Port Output Data Register */
++#define MCF_GPIO_PODR_DSPI	MCF_REG08(0xFC0A400A)	/* DSPI Port Output Data Register */
++#define MCF_GPIO_PODR_TIMER	MCF_REG08(0xFC0A400B)	/* Timer Port Output Data Register */
++#define MCF_GPIO_PODR_PCI	MCF_REG08(0xFC0A400C)	/* PCI Port Output Data Register */
++#define MCF_GPIO_PODR_USB	MCF_REG08(0xFC0A400D)	/* USB Port Output Data Register */
++#define MCF_GPIO_PODR_ATAH	MCF_REG08(0xFC0A400E)	/* ATA High Port Output Data Register */
++#define MCF_GPIO_PODR_ATAL	MCF_REG08(0xFC0A400F)	/* ATA Low Port Output Data Register */
++#define MCF_GPIO_PODR_FEC1H	MCF_REG08(0xFC0A4010)	/* FEC1 High Port Output Data Register */
++#define MCF_GPIO_PODR_FEC1L	MCF_REG08(0xFC0A4011)	/* FEC1 Low Port Output Data Register */
++#define MCF_GPIO_PODR_FBADH	MCF_REG08(0xFC0A4014)	/* Flexbus AD High Port Output Data Register */
++#define MCF_GPIO_PODR_FBADMH	MCF_REG08(0xFC0A4015)	/* Flexbus AD Med-High Port Output Data Register */
++#define MCF_GPIO_PODR_FBADML	MCF_REG08(0xFC0A4016)	/* Flexbus AD Med-Low Port Output Data Register */
++#define MCF_GPIO_PODR_FBADL	MCF_REG08(0xFC0A4017)	/* Flexbus AD Low Port Output Data Register */
++#define MCF_GPIO_PDDR_FEC0H	MCF_REG08(0xFC0A4018)	/* FEC0 High Port Data Direction Register */
++#define MCF_GPIO_PDDR_FEC0L	MCF_REG08(0xFC0A4019)	/* FEC0 Low Port Data Direction Register */
++#define MCF_GPIO_PDDR_SSI	MCF_REG08(0xFC0A401A)	/* SSI Port Data Direction Register */
++#define MCF_GPIO_PDDR_FBCTL	MCF_REG08(0xFC0A401B)	/* Flexbus Control Port Data Direction Register */
++#define MCF_GPIO_PDDR_BE	MCF_REG08(0xFC0A401C)	/* Flexbus Byte Enable Port Data Direction Register */
++#define MCF_GPIO_PDDR_CS	MCF_REG08(0xFC0A401D)	/* Flexbus Chip-Select Port Data Direction Register */
++#define MCF_GPIO_PDDR_DMA	MCF_REG08(0xFC0A401E)	/* DMA Port Data Direction Register */
++#define MCF_GPIO_PDDR_FECI2C	MCF_REG08(0xFC0A401F)	/* FEC1 / I2C Port Data Direction Register */
++#define MCF_GPIO_PDDR_UART	MCF_REG08(0xFC0A4021)	/* UART Port Data Direction Register */
++#define MCF_GPIO_PDDR_DSPI	MCF_REG08(0xFC0A4022)	/* DSPI Port Data Direction Register */
++#define MCF_GPIO_PDDR_TIMER	MCF_REG08(0xFC0A4023)	/* Timer Port Data Direction Register */
++#define MCF_GPIO_PDDR_PCI	MCF_REG08(0xFC0A4024)	/* PCI Port Data Direction Register */
++#define MCF_GPIO_PDDR_USB	MCF_REG08(0xFC0A4025)	/* USB Port Data Direction Register */
++#define MCF_GPIO_PDDR_ATAH	MCF_REG08(0xFC0A4026)	/* ATA High Port Data Direction Register */
++#define MCF_GPIO_PDDR_ATAL	MCF_REG08(0xFC0A4027)	/* ATA Low Port Data Direction Register */
++#define MCF_GPIO_PDDR_FEC1H	MCF_REG08(0xFC0A4028)	/* FEC1 High Port Data Direction Register */
++#define MCF_GPIO_PDDR_FEC1L	MCF_REG08(0xFC0A4029)	/* FEC1 Low Port Data Direction Register */
++#define MCF_GPIO_PDDR_FBADH	MCF_REG08(0xFC0A402C)	/* Flexbus AD High Port Data Direction Register */
++#define MCF_GPIO_PDDR_FBADMH	MCF_REG08(0xFC0A402D)	/* Flexbus AD Med-High Port Data Direction Register */
++#define MCF_GPIO_PDDR_FBADML	MCF_REG08(0xFC0A402E)	/* Flexbus AD Med-Low Port Data Direction Register */
++#define MCF_GPIO_PDDR_FBADL	MCF_REG08(0xFC0A402F)	/* Flexbus AD Low Port Data Direction Register */
++#define MCF_GPIO_PPDSDR_FEC0H	MCF_REG08(0xFC0A4030)	/* FEC0 High Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_FEC0L	MCF_REG08(0xFC0A4031)	/* FEC0 Low Port Clear Output Data Register */
++#define MCF_GPIO_PPDSDR_SSI	MCF_REG08(0xFC0A4032)	/* SSI Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_FBCTL	MCF_REG08(0xFC0A4033)	/* Flexbus Control Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_BE	MCF_REG08(0xFC0A4034)	/* Flexbus Byte Enable Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_CS	MCF_REG08(0xFC0A4035)	/* Flexbus Chip-Select Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_DMA	MCF_REG08(0xFC0A4036)	/* DMA Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_FECI2C	MCF_REG08(0xFC0A4037)	/* FEC1 / I2C Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_UART	MCF_REG08(0xFC0A4039)	/* UART Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_DSPI	MCF_REG08(0xFC0A403A)	/* DSPI Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_TIMER	MCF_REG08(0xFC0A403B)	/* FTimer Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_PCI	MCF_REG08(0xFC0A403C)	/* PCI Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_USB	MCF_REG08(0xFC0A403D)	/* USB Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_ATAH	MCF_REG08(0xFC0A403E)	/* ATA High Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_ATAL	MCF_REG08(0xFC0A403F)	/* ATA Low Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_FEC1H	MCF_REG08(0xFC0A4040)	/* FEC1 High Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_FEC1L	MCF_REG08(0xFC0A4041)	/* FEC1 Low Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_FBADH	MCF_REG08(0xFC0A4044)	/* Flexbus AD High Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_FBADMH	MCF_REG08(0xFC0A4045)	/* Flexbus AD Med-High Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_FBADML	MCF_REG08(0xFC0A4046)	/* Flexbus AD Med-Low Port Pin Data/Set Data Register */
++#define MCF_GPIO_PPDSDR_FBADL	MCF_REG08(0xFC0A4047)	/* Flexbus AD Low Port Pin Data/Set Data Register */
++#define MCF_GPIO_PCLRR_FEC0H	MCF_REG08(0xFC0A4048)	/* FEC0 High Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_FEC0L	MCF_REG08(0xFC0A4049)	/* FEC0 Low Port Pin Data/Set Data Register */
++#define MCF_GPIO_PCLRR_SSI	MCF_REG08(0xFC0A404A)	/* SSI Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_FBCTL	MCF_REG08(0xFC0A404B)	/* Flexbus Control Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_BE	MCF_REG08(0xFC0A404C)	/* Flexbus Byte Enable Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_CS	MCF_REG08(0xFC0A404D)	/* Flexbus Chip-Select Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_DMA	MCF_REG08(0xFC0A404E)	/* DMA Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_FECI2C	MCF_REG08(0xFC0A404F)	/* FEC1 / I2C Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_UART	MCF_REG08(0xFC0A4051)	/* UART Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_DSPI	MCF_REG08(0xFC0A4052)	/* DSPI Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_TIMER	MCF_REG08(0xFC0A4053)	/* Timer Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_PCI	MCF_REG08(0xFC0A4054)	/* PCI Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_USB	MCF_REG08(0xFC0A4055)	/* USB Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_ATAH	MCF_REG08(0xFC0A4056)	/* ATA High Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_ATAL	MCF_REG08(0xFC0A4057)	/* ATA Low Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_FEC1H	MCF_REG08(0xFC0A4058)	/* FEC1 High Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_FEC1L	MCF_REG08(0xFC0A4059)	/* FEC1 Low Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_FBADH	MCF_REG08(0xFC0A405C)	/* Flexbus AD High Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_FBADMH	MCF_REG08(0xFC0A405D)	/* Flexbus AD Med-High Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_FBADML	MCF_REG08(0xFC0A405E)	/* Flexbus AD Med-Low Port Clear Output Data Register */
++#define MCF_GPIO_PCLRR_FBADL	MCF_REG08(0xFC0A405F)	/* Flexbus AD Low Port Clear Output Data Register */
++#define MCF_GPIO_PAR_FEC	MCF_REG08(0xFC0A4060)	/* FEC Pin Assignment Register */
++#define MCF_GPIO_PAR_DMA	MCF_REG08(0xFC0A4061)	/* DMA Pin Assignment Register */
++#define MCF_GPIO_PAR_FBCTL	MCF_REG08(0xFC0A4062)	/* Flexbus Control Pin Assignment Register */
++#define MCF_GPIO_PAR_DSPI	MCF_REG08(0xFC0A4063)	/* DSPI Pin Assignment Register */
++#define MCF_GPIO_PAR_BE		MCF_REG08(0xFC0A4064)	/* Flexbus Byte-Enable Pin Assignment Register */
++#define MCF_GPIO_PAR_CS		MCF_REG08(0xFC0A4065)	/* Flexbus Chip-Select Pin Assignment Register */
++#define MCF_GPIO_PAR_TIMER	MCF_REG08(0xFC0A4066)	/* Time Pin Assignment Register */
++#define MCF_GPIO_PAR_USB	MCF_REG08(0xFC0A4067)	/* USB Pin Assignment Register */
++#define MCF_GPIO_PAR_UART	MCF_REG08(0xFC0A4069)	/* UART Pin Assignment Register */
++#define MCF_GPIO_PAR_FECI2C	MCF_REG16(0xFC0A406A)	/* FEC / I2C Pin Assignment Register */
++#define MCF_GPIO_PAR_SSI	MCF_REG16(0xFC0A406C)	/* SSI Pin Assignment Register */
++#define MCF_GPIO_PAR_ATA	MCF_REG16(0xFC0A406E)	/* ATA Pin Assignment Register */
++#define MCF_GPIO_PAR_IRQ	MCF_REG08(0xFC0A4070)	/* IRQ Pin Assignment Register */
++#define MCF_GPIO_PAR_PCI	MCF_REG16(0xFC0A4072)	/* PCI Pin Assignment Register */
++#define MCF_GPIO_MSCR_SDRAM	MCF_REG08(0xFC0A4074)	/* SDRAM Mode Select Control Register */
++#define MCF_GPIO_MSCR_PCI	MCF_REG08(0xFC0A4075)	/* PCI Mode Select Control Register */
++#define MCF_GPIO_DSCR_I2C	MCF_REG08(0xFC0A4078)	/* I2C Drive Strength Control Register */
++#define MCF_GPIO_DSCR_FLEXBUS	MCF_REG08(0xFC0A4079)	/* FLEXBUS Drive Strength Control Register */
++#define MCF_GPIO_DSCR_FEC	MCF_REG08(0xFC0A407A)	/* FEC Drive Strength Control Register */
++#define MCF_GPIO_DSCR_UART	MCF_REG08(0xFC0A407B)	/* UART Drive Strength Control Register */
++#define MCF_GPIO_DSCR_DSPI	MCF_REG08(0xFC0A407C)	/* DSPI Drive Strength Control Register */
++#define MCF_GPIO_DSCR_TIMER	MCF_REG08(0xFC0A407D)	/* TIMER Drive Strength Control Register */
++#define MCF_GPIO_DSCR_SSI	MCF_REG08(0xFC0A407E)	/* SSI Drive Strength Control Register */
++#define MCF_GPIO_DSCR_DMA	MCF_REG08(0xFC0A407F)	/* DMA Drive Strength Control Register */
++#define MCF_GPIO_DSCR_DEBUG	MCF_REG08(0xFC0A4080)	/* DEBUG Drive Strength Control Register */
++#define MCF_GPIO_DSCR_RESET	MCF_REG08(0xFC0A4081)	/* RESET Drive Strength Control Register */
++#define MCF_GPIO_DSCR_IRQ	MCF_REG08(0xFC0A4082)	/* IRQ Drive Strength Control Register */
++#define MCF_GPIO_DSCR_USB	MCF_REG08(0xFC0A4083)	/* USB Drive Strength Control Register */
++#define MCF_GPIO_DSCR_ATA	MCF_REG08(0xFC0A4084)	/* ATA Drive Strength Control Register */
++
++/* Bit definitions and macros for PODR_FEC0H */
++#define MCF_GPIO_PODR_FEC0H_PODR0	(0x01)	/* FEC0_CRS / ULPI_DATA6 */
++#define MCF_GPIO_PODR_FEC0H_PODR1	(0x02)	/* FEC0_RXD0 / FEC0_RMII_RXD0 */
++#define MCF_GPIO_PODR_FEC0H_PODR2	(0x04)	/* FEC0_RXDV/FEC0_RMII_CRS_DV */
++#define MCF_GPIO_PODR_FEC0H_PODR3	(0x08)	/* FEC0_RXCLK / ULPI_DATA1 */
++#define MCF_GPIO_PODR_FEC0H_PODR4	(0x10)	/* FEC0_COL / ULPI_DATA7 */
++#define MCF_GPIO_PODR_FEC0H_PODR5	(0x20)	/* FEC0_TXD0 / FEC0_RMII_TXD0 */
++#define MCF_GPIO_PODR_FEC0H_PODR6	(0x40)	/* FEC0_TXEN / FEC0_RMII_TXEN */
++#define MCF_GPIO_PODR_FEC0H_PODR7	(0x80)	/* FEC0_TXCLK / FEC0_RMII_REF_CLK */
++
++/* Bit definitions and macros for PODR_FEC0L */
++#define MCF_GPIO_PODR_FEC0L_PODR0	(0x01)	/* FEC0_RXER / FEC0_RMII_RXER */
++#define MCF_GPIO_PODR_FEC0L_PODR1	(0x02)	/* FEC0_RXD1 / FEC0_RMII_RXD1 */
++#define MCF_GPIO_PODR_FEC0L_PODR2	(0x04)	/* FEC0_RXD2 / ULPI_DATA4 */
++#define MCF_GPIO_PODR_FEC0L_PODR3	(0x08)	/* FEC0_RXD3 / ULPI_DATA5 */
++#define MCF_GPIO_PODR_FEC0L_PODR4	(0x10)	/* FEC0_TXER / ULPI_DATA0 */
++#define MCF_GPIO_PODR_FEC0L_PODR5	(0x20)	/* FEC0_TXD1 / FEC0_RMII_TXD1 */
++#define MCF_GPIO_PODR_FEC0L_PODR6	(0x40)	/* FEC0_TXD2 / ULPI_DATA2 */
++#define MCF_GPIO_PODR_FEC0L_PODR7	(0x80)	/* FEC0_TXD3 / ULPI_DATA3 */
++
++/* Bit definitions and macros for PODR_SSI */
++#define MCF_GPIO_PODR_SSI_PODR0		(0x01)	/* SSI_TXD / U1TXD */
++#define MCF_GPIO_PODR_SSI_PODR1		(0x02)	/* SSI_RXD / U1RXD */
++#define MCF_GPIO_PODR_SSI_PODR2		(0x04)	/* SSI_FS / U1RTS */
++#define MCF_GPIO_PODR_SSI_PODR3		(0x08)	/* SSI_BCLK / U1CTS */
++#define MCF_GPIO_PODR_SSI_PODR4		(0x10)	/* SSI_MCLK */
++
++/* Bit definitions and macros for PODR_FBCTL */
++#define MCF_GPIO_PODR_FBCTL_PODR0	(0x01)	/* FB_TS / FB_ALE / FB_TBST */
++#define MCF_GPIO_PODR_FBCTL_PODR1	(0x02)	/* FB_RW */
++#define MCF_GPIO_PODR_FBCTL_PODR2	(0x04)	/* FB_TA */
++#define MCF_GPIO_PODR_FBCTL_PODR3	(0x08)	/* FB_OE */
++
++/* Bit definitions and macros for PODR_BE */
++#define MCF_GPIO_PODR_BE_PODR0		(0x01)	/* FB_BE/BWE0 / FB_SIZ0 */
++#define MCF_GPIO_PODR_BE_PODR1		(0x02)	/* FB_BE/BWE1 / FB_SIZ1 */
++#define MCF_GPIO_PODR_BE_PODR2		(0x04)	/* FB_BE/BWE2 / FB_SIZ2 */
++#define MCF_GPIO_PODR_BE_PODR3		(0x08)	/* FB_BE/BWE3 / FB_SIZ3 */
++
++/* Bit definitions and macros for PODR_CS */
++#define MCF_GPIO_PODR_CS_PODR1		(0x02)	/* FB_CS1 */
++#define MCF_GPIO_PODR_CS_PODR2		(0x04)	/* FB_CS2 */
++#define MCF_GPIO_PODR_CS_PODR3		(0x08)	/* FB_CS3 */
++
++/* Bit definitions and macros for PODR_DMA */
++#define MCF_GPIO_PODR_DMA_PODR0		(0x01)	/* DREQ0 */
++#define MCF_GPIO_PODR_DMA_PODR1		(0x02)	/* DACK0 / DSPI_PCS3 */
++#define MCF_GPIO_PODR_DMA_PODR2		(0x04)	/* DREQ1 / USB_CLKIN */
++#define MCF_GPIO_PODR_DMA_PODR3		(0x08)	/* DACK1 / ULPI_DIR */
++
++/* Bit definitions and macros for PODR_FECI2C */
++#define MCF_GPIO_PODR_FECI2C_PODR0	(0x01)	/* I2C_SDA / U2RXD */
++#define MCF_GPIO_PODR_FECI2C_PODR1	(0x02)	/* I2C_SCL / U2TXD */
++#define MCF_GPIO_PODR_FECI2C_PODR2	(0x04)	/* FEC0_MDIO */
++#define MCF_GPIO_PODR_FECI2C_PODR3	(0x08)	/* FEC0_MDC */
++#define MCF_GPIO_PODR_FECI2C_PODR4	(0x10)	/* FEC1_MDIO / ATA_DIOW */
++#define MCF_GPIO_PODR_FECI2C_PODR5	(0x20)	/* FEC1_MDC / ATA_DIOR */
++
++/* Bit definitions and macros for PODR_UART */
++#define MCF_GPIO_PODR_UART_PODR0	(0x01)	/* U1TXD */
++#define MCF_GPIO_PODR_UART_PODR1	(0x02)	/* U1RXD */
++#define MCF_GPIO_PODR_UART_PODR2	(0x04)	/* U1RTS */
++#define MCF_GPIO_PODR_UART_PODR3	(0x08)	/* U0CTS */
++#define MCF_GPIO_PODR_UART_PODR4	(0x10)	/* U1TXD */
++#define MCF_GPIO_PODR_UART_PODR5	(0x20)	/* U1RXD */
++#define MCF_GPIO_PODR_UART_PODR6	(0x40)	/* U1RTS */
++#define MCF_GPIO_PODR_UART_PODR7	(0x80)	/* U1CTS */
++
++/* Bit definitions and macros for PODR_DSPI */
++#define MCF_GPIO_PODR_DSPI_PODR0	(0x01)	/* DSPI_SOUT / SBF_DO */
++#define MCF_GPIO_PODR_DSPI_PODR1	(0x02)	/* DSPI_SIN / SBF_DI */
++#define MCF_GPIO_PODR_DSPI_PODR2	(0x04)	/* DSPI_SCK / SBF_CK */
++#define MCF_GPIO_PODR_DSPI_PODR3	(0x08)	/* DSPI_PCS0/SS */
++#define MCF_GPIO_PODR_DSPI_PODR4	(0x10)	/* DSPI_PCS1 / SBF_CS */
++#define MCF_GPIO_PODR_DSPI_PODR5	(0x20)	/* DSPI_PCS2 */
++#define MCF_GPIO_PODR_DSPI_PODR6	(0x40)	/* DSPI_PCS5/SS */
++
++/* Bit definitions and macros for PODR_TIMER */
++#define MCF_GPIO_PODR_TIMER_PODR0	(0x01)	/* T0IN / T0OUT / U2RTS */
++#define MCF_GPIO_PODR_TIMER_PODR1	(0x02)	/* T1IN / T1OUT / U2CTS */
++#define MCF_GPIO_PODR_TIMER_PODR2	(0x04)	/* T2IN / T2OUT / U2TXD */
++#define MCF_GPIO_PODR_TIMER_PODR3	(0x08)	/* T3IN / T3OUT / U2RXD */
++
++/* Bit definitions and macros for PODR_PCI */
++#define MCF_GPIO_PODR_PCI_PODR0		(0x01)	/* PCI_REQ0/PCI_EXTGNT */
++#define MCF_GPIO_PODR_PCI_PODR1		(0x02)	/* PCI_REQ1 */
++#define MCF_GPIO_PODR_PCI_PODR2		(0x04)	/* PCI_REQ2 */
++#define MCF_GPIO_PODR_PCI_PODR3		(0x08)	/* PCI_REQ3 / ATA_INTR */
++#define MCF_GPIO_PODR_PCI_PODR4		(0x10)	/* PCI_GNT0/PCI_EXTREQ */
++#define MCF_GPIO_PODR_PCI_PODR5		(0x20)	/* PCI_GNT1 /  */
++#define MCF_GPIO_PODR_PCI_PODR6		(0x40)	/* PCI_GNT2 /  */
++#define MCF_GPIO_PODR_PCI_PODR7		(0x80)	/* PCI_GNT3 / ATA_DMACK */
++
++/* Bit definitions and macros for PODR_USB */
++#define MCF_GPIO_PODR_USB_PODR0		(0x01)	/* USB_VBUS_OC / ULPI_STP */
++#define MCF_GPIO_PODR_USB_PODR1		(0x02)	/* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */
++
++/* Bit definitions and macros for PODR_ATAH */
++#define MCF_GPIO_PODR_ATAH_PODR0	(0x01)	/* ATA_DA0 */
++#define MCF_GPIO_PODR_ATAH_PODR1	(0x02)	/* ATA_DA1 */
++#define MCF_GPIO_PODR_ATAH_PODR2	(0x04)	/* ATA_DA2 */
++#define MCF_GPIO_PODR_ATAH_PODR3	(0x08)	/* ATA_CS0 */
++#define MCF_GPIO_PODR_ATAH_PODR4	(0x10)	/* ATA_CS1 */
++#define MCF_GPIO_PODR_ATAH_PODR5	(0x20)	/* ATA_BUFFER_EN */
++
++/* Bit definitions and macros for PODR_ATAL */
++#define MCF_GPIO_PODR_ATAL_PODR0	(0x01)	/* ATA_IORDY */
++#define MCF_GPIO_PODR_ATAL_PODR1	(0x02)	/* ATA_DMARQ */
++#define MCF_GPIO_PODR_ATAL_PODR2	(0x04)	/* ATA_RESET */
++
++/* Bit definitions and macros for PODR_FEC1H */
++#define MCF_GPIO_PODR_FEC1H_PODR0	(0x01)	/* FEC1_CRS / ATA_DATA6 */
++#define MCF_GPIO_PODR_FEC1H_PODR1	(0x02)	/* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */
++#define MCF_GPIO_PODR_FEC1H_PODR2	(0x04)	/* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */
++#define MCF_GPIO_PODR_FEC1H_PODR3	(0x08)	/* FEC1_RXCLK / ATA_DATA5 */
++#define MCF_GPIO_PODR_FEC1H_PODR4	(0x10)	/* FEC1_COL / ATA_DATA7 */
++#define MCF_GPIO_PODR_FEC1H_PODR5	(0x20)	/* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */
++#define MCF_GPIO_PODR_FEC1H_PODR6	(0x40)	/* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */
++#define MCF_GPIO_PODR_FEC1H_PODR7	(0x80)	/* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */
++
++/* Bit definitions and macros for PODR_FEC1L */
++#define MCF_GPIO_PODR_FEC1L_PODR0	(0x01)	/* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */
++#define MCF_GPIO_PODR_FEC1L_PODR1	(0x02)	/* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */
++#define MCF_GPIO_PODR_FEC1L_PODR2	(0x04)	/* FEC1_RXD2 / ATA_DATA3 */
++#define MCF_GPIO_PODR_FEC1L_PODR3	(0x08)	/* FEC1_RXD3 / ATA_DATA4 */
++#define MCF_GPIO_PODR_FEC1L_PODR4	(0x10)	/* FEC1_TXER / ATA_DATA0 */
++#define MCF_GPIO_PODR_FEC1L_PODR5	(0x20)	/* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */
++#define MCF_GPIO_PODR_FEC1L_PODR6	(0x40)	/* FEC1_TXD2 / ATA_DATA1 */
++#define MCF_GPIO_PODR_FEC1L_PODR7	(0x80)	/* FEC1_TXD3 / ATA_DATA2 */
++
++/* Bit definitions and macros for PODR_FBADH */
++#define MCF_GPIO_PODR_FBADH_PODR0	(0x01)	/* FB_AD24 */
++#define MCF_GPIO_PODR_FBADH_PODR1	(0x02)	/* FB_AD25 */
++#define MCF_GPIO_PODR_FBADH_PODR2	(0x04)	/* FB_AD26 */
++#define MCF_GPIO_PODR_FBADH_PODR3	(0x08)	/* FB_AD27 */
++#define MCF_GPIO_PODR_FBADH_PODR4	(0x10)	/* FB_AD28 */
++#define MCF_GPIO_PODR_FBADH_PODR5	(0x20)	/* FB_AD29 */
++#define MCF_GPIO_PODR_FBADH_PODR6	(0x40)	/* FB_AD30 */
++#define MCF_GPIO_PODR_FBADH_PODR7	(0x80)	/* FB_AD31 */
++
++/* Bit definitions and macros for PODR_FBADMH */
++#define MCF_GPIO_PODR_FBADMH_PODR0	(0x01)	/* FB_AD16 */
++#define MCF_GPIO_PODR_FBADMH_PODR1	(0x02)	/* FB_AD17 */
++#define MCF_GPIO_PODR_FBADMH_PODR2	(0x04)	/* FB_AD18 */
++#define MCF_GPIO_PODR_FBADMH_PODR3	(0x08)	/* FB_AD19 */
++#define MCF_GPIO_PODR_FBADMH_PODR4	(0x10)	/* FB_AD20 */
++#define MCF_GPIO_PODR_FBADMH_PODR5	(0x20)	/* FB_AD21 */
++#define MCF_GPIO_PODR_FBADMH_PODR6	(0x40)	/* FB_AD22 */
++#define MCF_GPIO_PODR_FBADMH_PODR7	(0x80)	/* FB_AD23 */
++
++/* Bit definitions and macros for PODR_FBADML */
++#define MCF_GPIO_PODR_FBADML_PODR0	(0x01)	/* FB_AD8 */
++#define MCF_GPIO_PODR_FBADML_PODR1	(0x02)	/* FB_AD9 */
++#define MCF_GPIO_PODR_FBADML_PODR2	(0x04)	/* FB_AD10 */
++#define MCF_GPIO_PODR_FBADML_PODR3	(0x08)	/* FB_AD11 */
++#define MCF_GPIO_PODR_FBADML_PODR4	(0x10)	/* FB_AD12 */
++#define MCF_GPIO_PODR_FBADML_PODR5	(0x20)	/* FB_AD13 */
++#define MCF_GPIO_PODR_FBADML_PODR6	(0x40)	/* FB_AD14 */
++#define MCF_GPIO_PODR_FBADML_PODR7	(0x80)	/* FB_AD15 */
++
++/* Bit definitions and macros for PODR_FBADL */
++#define MCF_GPIO_PODR_FBADL_PODR0	(0x01)	/* FB_AD0 */
++#define MCF_GPIO_PODR_FBADL_PODR1	(0x02)	/* FB_AD1 */
++#define MCF_GPIO_PODR_FBADL_PODR2	(0x04)	/* FB_AD2 */
++#define MCF_GPIO_PODR_FBADL_PODR3	(0x08)	/* FB_AD3 */
++#define MCF_GPIO_PODR_FBADL_PODR4	(0x10)	/* FB_AD4 */
++#define MCF_GPIO_PODR_FBADL_PODR5	(0x20)	/* FB_AD5 */
++#define MCF_GPIO_PODR_FBADL_PODR6	(0x40)	/* FB_AD6 */
++#define MCF_GPIO_PODR_FBADL_PODR7	(0x80)	/* FB_AD7 */
++
++/* Bit definitions and macros for PDDR_FEC0H */
++#define MCF_GPIO_PDDR_FEC0H_PDDR0	(0x01)	/* FEC0_CRS / ULPI_DATA6 */
++#define MCF_GPIO_PDDR_FEC0H_PDDR1	(0x02)	/* FEC0_RXD0 / FEC0_RMII_RXD0 */
++#define MCF_GPIO_PDDR_FEC0H_PDDR2	(0x04)	/* FEC0_RXDV/FEC0_RMII_CRS_DV */
++#define MCF_GPIO_PDDR_FEC0H_PDDR3	(0x08)	/* FEC0_RXCLK / ULPI_DATA1 */
++#define MCF_GPIO_PDDR_FEC0H_PDDR4	(0x10)	/* FEC0_COL / ULPI_DATA7 */
++#define MCF_GPIO_PDDR_FEC0H_PDDR5	(0x20)	/* FEC0_TXD0 / FEC0_RMII_TXD0 */
++#define MCF_GPIO_PDDR_FEC0H_PDDR6	(0x40)	/* FEC0_TXEN / FEC0_RMII_TXEN */
++#define MCF_GPIO_PDDR_FEC0H_PDDR7	(0x80)	/* FEC0_TXCLK / FEC0_RMII_REF_CLK */
++
++/* Bit definitions and macros for PDDR_FEC0L */
++#define MCF_GPIO_PDDR_FEC0L_PDDR0	(0x01)	/* FEC0_RXER / FEC0_RMII_RXER */
++#define MCF_GPIO_PDDR_FEC0L_PDDR1	(0x02)	/* FEC0_RXD1 / FEC0_RMII_RXD1 */
++#define MCF_GPIO_PDDR_FEC0L_PDDR2	(0x04)	/* FEC0_RXD2 / ULPI_DATA4 */
++#define MCF_GPIO_PDDR_FEC0L_PDDR3	(0x08)	/* FEC0_RXD3 / ULPI_DATA5 */
++#define MCF_GPIO_PDDR_FEC0L_PDDR4	(0x10)	/* FEC0_TXER / ULPI_DATA0 */
++#define MCF_GPIO_PDDR_FEC0L_PDDR5	(0x20)	/* FEC0_TXD1 / FEC0_RMII_TXD1 */
++#define MCF_GPIO_PDDR_FEC0L_PDDR6	(0x40)	/* FEC0_TXD2 / ULPI_DATA2 */
++#define MCF_GPIO_PDDR_FEC0L_PDDR7	(0x80)	/* FEC0_TXD3 / ULPI_DATA3 */
++
++/* Bit definitions and macros for PDDR_SSI */
++#define MCF_GPIO_PDDR_SSI_PDDR0		(0x01)	/* SSI_TXD / U1TXD */
++#define MCF_GPIO_PDDR_SSI_PDDR1		(0x02)	/* SSI_RXD / U1RXD */
++#define MCF_GPIO_PDDR_SSI_PDDR2		(0x04)	/* SSI_FS / U1RTS */
++#define MCF_GPIO_PDDR_SSI_PDDR3		(0x08)	/* SSI_BCLK / U1CTS */
++#define MCF_GPIO_PDDR_SSI_PDDR4		(0x10)	/* SSI_MCLK */
++
++/* Bit definitions and macros for PDDR_FBCTL */
++#define MCF_GPIO_PDDR_FBCTL_PDDR0	(0x01)	/* FB_TS / FB_ALE / FB_TBST */
++#define MCF_GPIO_PDDR_FBCTL_PDDR1	(0x02)	/* FB_RW */
++#define MCF_GPIO_PDDR_FBCTL_PDDR2	(0x04)	/* FB_TA */
++#define MCF_GPIO_PDDR_FBCTL_PDDR3	(0x08)	/* FB_OE */
++
++/* Bit definitions and macros for PDDR_BE */
++#define MCF_GPIO_PDDR_BE_PDDR0		(0x01)	/* FB_BE/BWE0 / FB_SIZ0 */
++#define MCF_GPIO_PDDR_BE_PDDR1		(0x02)	/* FB_BE/BWE1 / FB_SIZ1 */
++#define MCF_GPIO_PDDR_BE_PDDR2		(0x04)	/* FB_BE/BWE2 / FB_SIZ2 */
++#define MCF_GPIO_PDDR_BE_PDDR3		(0x08)	/* FB_BE/BWE3 / FB_SIZ3 */
++
++/* Bit definitions and macros for PDDR_CS */
++#define MCF_GPIO_PDDR_CS_PDDR1		(0x02)	/* FB_CS1 */
++#define MCF_GPIO_PDDR_CS_PDDR2		(0x04)	/* FB_CS2 */
++#define MCF_GPIO_PDDR_CS_PDDR3		(0x08)	/* FB_CS3 */
++
++/* Bit definitions and macros for PDDR_DMA */
++#define MCF_GPIO_PDDR_DMA_PDDR0		(0x01)	/* DREQ0 */
++#define MCF_GPIO_PDDR_DMA_PDDR1		(0x02)	/* DACK0 / DSPI_PCS3 */
++#define MCF_GPIO_PDDR_DMA_PDDR2		(0x04)	/* DREQ1 / USB_CLKIN */
++#define MCF_GPIO_PDDR_DMA_PDDR3		(0x08)	/* DACK1 / ULPI_DIR */
++
++/* Bit definitions and macros for PDDR_FECI2C */
++#define MCF_GPIO_PDDR_FECI2C_PDDR0	(0x01)	/* I2C_SDA / U2RXD */
++#define MCF_GPIO_PDDR_FECI2C_PDDR1	(0x02)	/* I2C_SCL / U2TXD */
++#define MCF_GPIO_PDDR_FECI2C_PDDR2	(0x04)	/* FEC0_MDIO */
++#define MCF_GPIO_PDDR_FECI2C_PDDR3	(0x08)	/* FEC0_MDC */
++#define MCF_GPIO_PDDR_FECI2C_PDDR4	(0x10)	/* FEC1_MDIO / ATA_DIOW */
++#define MCF_GPIO_PDDR_FECI2C_PDDR5	(0x20)	/* FEC1_MDC / ATA_DIOR */
++
++/* Bit definitions and macros for PDDR_UART */
++#define MCF_GPIO_PDDR_UART_PDDR0	(0x01)	/* U1TXD */
++#define MCF_GPIO_PDDR_UART_PDDR1	(0x02)	/* U1RXD */
++#define MCF_GPIO_PDDR_UART_PDDR2	(0x04)	/* U1RTS */
++#define MCF_GPIO_PDDR_UART_PDDR3	(0x08)	/* U0CTS */
++#define MCF_GPIO_PDDR_UART_PDDR4	(0x10)	/* U1TXD */
++#define MCF_GPIO_PDDR_UART_PDDR5	(0x20)	/* U1RXD */
++#define MCF_GPIO_PDDR_UART_PDDR6	(0x40)	/* U1RTS */
++#define MCF_GPIO_PDDR_UART_PDDR7	(0x80)	/* U1CTS */
++
++/* Bit definitions and macros for PDDR_DSPI */
++#define MCF_GPIO_PDDR_DSPI_PDDR0	(0x01)	/* DSPI_SOUT / SBF_DO */
++#define MCF_GPIO_PDDR_DSPI_PDDR1	(0x02)	/* DSPI_SIN / SBF_DI */
++#define MCF_GPIO_PDDR_DSPI_PDDR2	(0x04)	/* DSPI_SCK / SBF_CK */
++#define MCF_GPIO_PDDR_DSPI_PDDR3	(0x08)	/* DSPI_PCS0/SS */
++#define MCF_GPIO_PDDR_DSPI_PDDR4	(0x10)	/* DSPI_PCS1 / SBF_CS */
++#define MCF_GPIO_PDDR_DSPI_PDDR5	(0x20)	/* DSPI_PCS2 */
++#define MCF_GPIO_PDDR_DSPI_PDDR6	(0x40)	/* DSPI_PCS5/SS */
++
++/* Bit definitions and macros for PDDR_TIMER */
++#define MCF_GPIO_PDDR_TIMER_PDDR0	(0x01)	/* T0IN / T0OUT / U2RTS */
++#define MCF_GPIO_PDDR_TIMER_PDDR1	(0x02)	/* T1IN / T1OUT / U2CTS */
++#define MCF_GPIO_PDDR_TIMER_PDDR2	(0x04)	/* T2IN / T2OUT / U2TXD */
++#define MCF_GPIO_PDDR_TIMER_PDDR3	(0x08)	/* T3IN / T3OUT / U2RXD */
++
++/* Bit definitions and macros for PDDR_PCI */
++#define MCF_GPIO_PDDR_PCI_PDDR0		(0x01)	/* PCI_REQ0/PCI_EXTGNT */
++#define MCF_GPIO_PDDR_PCI_PDDR1		(0x02)	/* PCI_REQ1 */
++#define MCF_GPIO_PDDR_PCI_PDDR2		(0x04)	/* PCI_REQ2 */
++#define MCF_GPIO_PDDR_PCI_PDDR3		(0x08)	/* PCI_REQ3 / ATA_INTR */
++#define MCF_GPIO_PDDR_PCI_PDDR4		(0x10)	/* PCI_GNT0/PCI_EXTREQ */
++#define MCF_GPIO_PDDR_PCI_PDDR5		(0x20)	/* PCI_GNT1 /  */
++#define MCF_GPIO_PDDR_PCI_PDDR6		(0x40)	/* PCI_GNT2 /  */
++#define MCF_GPIO_PDDR_PCI_PDDR7		(0x80)	/* PCI_GNT3 / ATA_DMACK */
++
++/* Bit definitions and macros for PDDR_USB */
++#define MCF_GPIO_PDDR_USB_PDDR0		(0x01)	/* USB_VBUS_OC / ULPI_STP */
++#define MCF_GPIO_PDDR_USB_PDDR1		(0x02)	/* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */
++
++/* Bit definitions and macros for PDDR_ATAH */
++#define MCF_GPIO_PDDR_ATAH_PDDR0	(0x01)	/* ATA_DA0 */
++#define MCF_GPIO_PDDR_ATAH_PDDR1	(0x02)	/* ATA_DA1 */
++#define MCF_GPIO_PDDR_ATAH_PDDR2	(0x04)	/* ATA_DA2 */
++#define MCF_GPIO_PDDR_ATAH_PDDR3	(0x08)	/* ATA_CS0 */
++#define MCF_GPIO_PDDR_ATAH_PDDR4	(0x10)	/* ATA_CS1 */
++#define MCF_GPIO_PDDR_ATAH_PDDR5	(0x20)	/* ATA_BUFFER_EN */
++
++/* Bit definitions and macros for PDDR_ATAL */
++#define MCF_GPIO_PDDR_ATAL_PDDR0	(0x01)	/* ATA_IORDY */
++#define MCF_GPIO_PDDR_ATAL_PDDR1	(0x02)	/* ATA_DMARQ */
++#define MCF_GPIO_PDDR_ATAL_PDDR2	(0x04)	/* ATA_RESET */
++
++/* Bit definitions and macros for PDDR_FEC1H */
++#define MCF_GPIO_PDDR_FEC1H_PDDR0	(0x01)	/* FEC1_CRS / ATA_DATA6 */
++#define MCF_GPIO_PDDR_FEC1H_PDDR1	(0x02)	/* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */
++#define MCF_GPIO_PDDR_FEC1H_PDDR2	(0x04)	/* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */
++#define MCF_GPIO_PDDR_FEC1H_PDDR3	(0x08)	/* FEC1_RXCLK / ATA_DATA5 */
++#define MCF_GPIO_PDDR_FEC1H_PDDR4	(0x10)	/* FEC1_COL / ATA_DATA7 */
++#define MCF_GPIO_PDDR_FEC1H_PDDR5	(0x20)	/* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */
++#define MCF_GPIO_PDDR_FEC1H_PDDR6	(0x40)	/* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */
++#define MCF_GPIO_PDDR_FEC1H_PDDR7	(0x80)	/* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */
++
++/* Bit definitions and macros for PDDR_FEC1L */
++#define MCF_GPIO_PDDR_FEC1L_PDDR0	(0x01)	/* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */
++#define MCF_GPIO_PDDR_FEC1L_PDDR1	(0x02)	/* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */
++#define MCF_GPIO_PDDR_FEC1L_PDDR2	(0x04)	/* FEC1_RXD2 / ATA_DATA3 */
++#define MCF_GPIO_PDDR_FEC1L_PDDR3	(0x08)	/* FEC1_RXD3 / ATA_DATA4 */
++#define MCF_GPIO_PDDR_FEC1L_PDDR4	(0x10)	/* FEC1_TXER / ATA_DATA0 */
++#define MCF_GPIO_PDDR_FEC1L_PDDR5	(0x20)	/* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */
++#define MCF_GPIO_PDDR_FEC1L_PDDR6	(0x40)	/* FEC1_TXD2 / ATA_DATA1 */
++#define MCF_GPIO_PDDR_FEC1L_PDDR7	(0x80)	/* FEC1_TXD3 / ATA_DATA2 */
++
++/* Bit definitions and macros for PDDR_FBADH */
++#define MCF_GPIO_PDDR_FBADH_PDDR0	(0x01)	/* FB_AD24 */
++#define MCF_GPIO_PDDR_FBADH_PDDR1	(0x02)	/* FB_AD25 */
++#define MCF_GPIO_PDDR_FBADH_PDDR2	(0x04)	/* FB_AD26 */
++#define MCF_GPIO_PDDR_FBADH_PDDR3	(0x08)	/* FB_AD27 */
++#define MCF_GPIO_PDDR_FBADH_PDDR4	(0x10)	/* FB_AD28 */
++#define MCF_GPIO_PDDR_FBADH_PDDR5	(0x20)	/* FB_AD29 */
++#define MCF_GPIO_PDDR_FBADH_PDDR6	(0x40)	/* FB_AD30 */
++#define MCF_GPIO_PDDR_FBADH_PDDR7	(0x80)	/* FB_AD31 */
++
++/* Bit definitions and macros for PDDR_FBADMH */
++#define MCF_GPIO_PDDR_FBADMH_PDDR0	(0x01)	/* FB_AD16 */
++#define MCF_GPIO_PDDR_FBADMH_PDDR1	(0x02)	/* FB_AD17 */
++#define MCF_GPIO_PDDR_FBADMH_PDDR2	(0x04)	/* FB_AD18 */
++#define MCF_GPIO_PDDR_FBADMH_PDDR3	(0x08)	/* FB_AD19 */
++#define MCF_GPIO_PDDR_FBADMH_PDDR4	(0x10)	/* FB_AD20 */
++#define MCF_GPIO_PDDR_FBADMH_PDDR5	(0x20)	/* FB_AD21 */
++#define MCF_GPIO_PDDR_FBADMH_PDDR6	(0x40)	/* FB_AD22 */
++#define MCF_GPIO_PDDR_FBADMH_PDDR7	(0x80)	/* FB_AD23 */
++
++/* Bit definitions and macros for PDDR_FBADML */
++#define MCF_GPIO_PDDR_FBADML_PDDR0	(0x01)	/* FB_AD8 */
++#define MCF_GPIO_PDDR_FBADML_PDDR1	(0x02)	/* FB_AD9 */
++#define MCF_GPIO_PDDR_FBADML_PDDR2	(0x04)	/* FB_AD10 */
++#define MCF_GPIO_PDDR_FBADML_PDDR3	(0x08)	/* FB_AD11 */
++#define MCF_GPIO_PDDR_FBADML_PDDR4	(0x10)	/* FB_AD12 */
++#define MCF_GPIO_PDDR_FBADML_PDDR5	(0x20)	/* FB_AD13 */
++#define MCF_GPIO_PDDR_FBADML_PDDR6	(0x40)	/* FB_AD14 */
++#define MCF_GPIO_PDDR_FBADML_PDDR7	(0x80)	/* FB_AD15 */
++
++/* Bit definitions and macros for PDDR_FBADL */
++#define MCF_GPIO_PDDR_FBADL_PDDR0	(0x01)	/* FB_AD0 */
++#define MCF_GPIO_PDDR_FBADL_PDDR1	(0x02)	/* FB_AD1 */
++#define MCF_GPIO_PDDR_FBADL_PDDR2	(0x04)	/* FB_AD2 */
++#define MCF_GPIO_PDDR_FBADL_PDDR3	(0x08)	/* FB_AD3 */
++#define MCF_GPIO_PDDR_FBADL_PDDR4	(0x10)	/* FB_AD4 */
++#define MCF_GPIO_PDDR_FBADL_PDDR5	(0x20)	/* FB_AD5 */
++#define MCF_GPIO_PDDR_FBADL_PDDR6	(0x40)	/* FB_AD6 */
++#define MCF_GPIO_PDDR_FBADL_PDDR7	(0x80)	/* FB_AD7 */
++
++/* Bit definitions and macros for PPDSDR_FEC0H */
++#define MCF_GPIO_PPDSDR_FEC0H_PPDR0	(0x01)	/* FEC0_CRS / ULPI_DATA6 */
++#define MCF_GPIO_PPDSDR_FEC0H_PPDR1	(0x02)	/* FEC0_RXD0 / FEC0_RMII_RXD0 */
++#define MCF_GPIO_PPDSDR_FEC0H_PPDR2	(0x04)	/* FEC0_RXDV / FEC0_RMII_CRS_DV */
++#define MCF_GPIO_PPDSDR_FEC0H_PPDR3	(0x08)	/* FEC0_RXCLK / ULPI_DATA1 */
++#define MCF_GPIO_PPDSDR_FEC0H_PPDR4	(0x10)	/* FEC0_COL / ULPI_DATA7 */
++#define MCF_GPIO_PPDSDR_FEC0H_PPDR5	(0x20)	/* FEC0_TXD0 / FEC0_RMII_TXD0 */
++#define MCF_GPIO_PPDSDR_FEC0H_PPDR6	(0x40)	/* FEC0_TXEN / FEC0_RMII_TXEN */
++#define MCF_GPIO_PPDSDR_FEC0H_PPDR7	(0x80)	/* FEC0_TXCLK / FEC0_RMII_REF_CLK */
++
++/* Bit definitions and macros for PPDSDR_FEC0L */
++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR0	(0x01)	/* FEC0_RXER / FEC0_RMII_RXER */
++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR1	(0x02)	/* FEC0_RXD1 / FEC0_RMII_RXD1 */
++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR2	(0x04)	/* FEC0_RXD2 / ULPI_DATA4 */
++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR3	(0x08)	/* FEC0_RXD3 / ULPI_DATA5 */
++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR4	(0x10)	/* FEC0_TXER / ULPI_DATA0 */
++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR5	(0x20)	/* FEC0_TXD1 / FEC0_RMII_TXD1 */
++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR6	(0x40)	/* FEC0_TXD2 / ULPI_DATA2 */
++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR7	(0x80)	/* FEC0_TXD3 / ULPI_DATA3 */
++
++/* Bit definitions and macros for PPDSDR_SSI */
++#define MCF_GPIO_PPDSDR_SSI_PPDR0	(0x01)	/* SSI_TXD / U1TXD */
++#define MCF_GPIO_PPDSDR_SSI_PPDR1	(0x02)	/* SSI_RXD / U1RXD */
++#define MCF_GPIO_PPDSDR_SSI_PPDR2	(0x04)	/* SSI_FS / U1RTS */
++#define MCF_GPIO_PPDSDR_SSI_PPDR3	(0x08)	/* SSI_BCLK / U1CTS */
++#define MCF_GPIO_PPDSDR_SSI_PPDR4	(0x10)	/* SSI_MCLK */
++
++/* Bit definitions and macros for PPDSDR_FBCTL */
++#define MCF_GPIO_PPDSDR_FBCTL_PPDR0	(0x01)	/* FB_TS / FB_ALE / FB_TBST */
++#define MCF_GPIO_PPDSDR_FBCTL_PPDR1	(0x02)	/* FB_RW */
++#define MCF_GPIO_PPDSDR_FBCTL_PPDR2	(0x04)	/* FB_TA */
++#define MCF_GPIO_PPDSDR_FBCTL_PPDR3	(0x08)	/* FB_OE */
++
++/* Bit definitions and macros for PPDSDR_BE */
++#define MCF_GPIO_PPDSDR_BE_PPDR0	(0x01)	/* FB_BE/BWE0 / FB_SIZ0 */
++#define MCF_GPIO_PPDSDR_BE_PPDR1	(0x02)	/* FB_BE/BWE1 / FB_SIZ1 */
++#define MCF_GPIO_PPDSDR_BE_PPDR2	(0x04)	/* FB_BE/BWE2 / FB_SIZ2 */
++#define MCF_GPIO_PPDSDR_BE_PPDR3	(0x08)	/* FB_BE/BWE3 / FB_SIZ3 */
++
++/* Bit definitions and macros for PPDSDR_CS */
++#define MCF_GPIO_PPDSDR_CS_PPDR1	(0x02)	/* FB_CS1 */
++#define MCF_GPIO_PPDSDR_CS_PPDR2	(0x04)	/* FB_CS2 */
++#define MCF_GPIO_PPDSDR_CS_PPDR3	(0x08)	/* FB_CS3 */
++
++/* Bit definitions and macros for PPDSDR_DMA */
++#define MCF_GPIO_PPDSDR_DMA_PPDR0	(0x01)	/* DREQ0 */
++#define MCF_GPIO_PPDSDR_DMA_PPDR1	(0x02)	/* DACK0 / DSPI_PCS3 */
++#define MCF_GPIO_PPDSDR_DMA_PPDR2	(0x04)	/* DREQ1 / USB_CLKIN */
++#define MCF_GPIO_PPDSDR_DMA_PPDR3	(0x08)	/* DACK1 / ULPI_DIR */
++
++/* Bit definitions and macros for PPDSDR_FECI2C */
++#define MCF_GPIO_PPDSDR_FECI2C_PPDR0	(0x01)	/* I2C_SDA / U2RXD */
++#define MCF_GPIO_PPDSDR_FECI2C_PPDR1	(0x02)	/* I2C_SCL / U2TXD */
++#define MCF_GPIO_PPDSDR_FECI2C_PPDR2	(0x04)	/* FEC0_MDIO */
++#define MCF_GPIO_PPDSDR_FECI2C_PPDR3	(0x08)	/* FEC0_MDC */
++#define MCF_GPIO_PPDSDR_FECI2C_PPDR4	(0x10)	/* FEC1_MDIO / ATA_DIOW */
++#define MCF_GPIO_PPDSDR_FECI2C_PPDR5	(0x20)	/* FEC1_MDC / ATA_DIOR */
++
++/* Bit definitions and macros for PPDSDR_UART */
++#define MCF_GPIO_PPDSDR_UART_PPDR0	(0x01)	/* U1TXD */
++#define MCF_GPIO_PPDSDR_UART_PPDR1	(0x02)	/* U1RXD */
++#define MCF_GPIO_PPDSDR_UART_PPDR2	(0x04)	/* U1RTS */
++#define MCF_GPIO_PPDSDR_UART_PPDR3	(0x08)	/* U0CTS */
++#define MCF_GPIO_PPDSDR_UART_PPDR4	(0x10)	/* U1TXD */
++#define MCF_GPIO_PPDSDR_UART_PPDR5	(0x20)	/* U1RXD */
++#define MCF_GPIO_PPDSDR_UART_PPDR6	(0x40)	/* U1RTS */
++#define MCF_GPIO_PPDSDR_UART_PPDR7	(0x80)	/* U1CTS */
++
++/* Bit definitions and macros for PPDSDR_DSPI */
++#define MCF_GPIO_PPDSDR_DSPI_PPDR0	(0x01)	/* DSPI_SOUT / SBF_DO */
++#define MCF_GPIO_PPDSDR_DSPI_PPDR1	(0x02)	/* DSPI_SIN / SBF_DI */
++#define MCF_GPIO_PPDSDR_DSPI_PPDR2	(0x04)	/* DSPI_SCK / SBF_CK */
++#define MCF_GPIO_PPDSDR_DSPI_PPDR3	(0x08)	/* DSPI_PCS0/SS */
++#define MCF_GPIO_PPDSDR_DSPI_PPDR4	(0x10)	/* DSPI_PCS1 / SBF_CS */
++#define MCF_GPIO_PPDSDR_DSPI_PPDR5	(0x20)	/* DSPI_PCS2 */
++#define MCF_GPIO_PPDSDR_DSPI_PPDR6	(0x40)	/* DSPI_PCS5/SS */
++
++/* Bit definitions and macros for PPDSDR_TIMER */
++#define MCF_GPIO_PPDSDR_TIMER_PPDR0	(0x01)	/* T0IN / T0OUT / U2RTS */
++#define MCF_GPIO_PPDSDR_TIMER_PPDR1	(0x02)	/* T1IN / T1OUT / U2CTS */
++#define MCF_GPIO_PPDSDR_TIMER_PPDR2	(0x04)	/* T2IN / T2OUT / U2TXD */
++#define MCF_GPIO_PPDSDR_TIMER_PPDR3	(0x08)	/* T3IN / T3OUT / U2RXD */
++
++/* Bit definitions and macros for PPDSDR_PCI */
++#define MCF_GPIO_PPDSDR_PCI_PPDR0	(0x01)	/* PCI_REQ0/PCI_EXTGNT */
++#define MCF_GPIO_PPDSDR_PCI_PPDR1	(0x02)	/* PCI_REQ1 */
++#define MCF_GPIO_PPDSDR_PCI_PPDR2	(0x04)	/* PCI_REQ2 */
++#define MCF_GPIO_PPDSDR_PCI_PPDR3	(0x08)	/* PCI_REQ3 / ATA_INTR */
++#define MCF_GPIO_PPDSDR_PCI_PPDR4	(0x10)	/* PCI_GNT0/PCI_EXTREQ */
++#define MCF_GPIO_PPDSDR_PCI_PPDR5	(0x20)	/* PCI_GNT1 /  */
++#define MCF_GPIO_PPDSDR_PCI_PPDR6	(0x40)	/* PCI_GNT2 /  */
++#define MCF_GPIO_PPDSDR_PCI_PPDR7	(0x80)	/* PCI_GNT3 / ATA_DMACK */
++
++/* Bit definitions and macros for PPDSDR_USB */
++#define MCF_GPIO_PPDSDR_USB_PPDR0	(0x01)	/* USB_VBUS_OC / ULPI_STP */
++#define MCF_GPIO_PPDSDR_USB_PPDR1	(0x02)	/* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */
++
++/* Bit definitions and macros for PPDSDR_ATAH */
++#define MCF_GPIO_PPDSDR_ATAH_PPDR0	(0x01)	/* ATA_DA0 */
++#define MCF_GPIO_PPDSDR_ATAH_PPDR1	(0x02)	/* ATA_DA1 */
++#define MCF_GPIO_PPDSDR_ATAH_PPDR2	(0x04)	/* ATA_DA2 */
++#define MCF_GPIO_PPDSDR_ATAH_PPDR3	(0x08)	/* ATA_CS0 */
++#define MCF_GPIO_PPDSDR_ATAH_PPDR4	(0x10)	/* ATA_CS1 */
++#define MCF_GPIO_PPDSDR_ATAH_PPDR5	(0x20)	/* ATA_BUFFER_EN */
++
++/* Bit definitions and macros for PPDSDR_ATAL */
++#define MCF_GPIO_PPDSDR_ATAL_PPDR0	(0x01)	/* ATA_IORDY */
++#define MCF_GPIO_PPDSDR_ATAL_PPDR1	(0x02)	/* ATA_DMARQ */
++#define MCF_GPIO_PPDSDR_ATAL_PPDR2	(0x04)	/* ATA_RESET */
++
++/* Bit definitions and macros for PPDSDR_FEC1H */
++#define MCF_GPIO_PPDSDR_FEC1H_PPDR0	(0x01)	/* FEC1_CRS / ATA_DATA6 */
++#define MCF_GPIO_PPDSDR_FEC1H_PPDR1	(0x02)	/* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */
++#define MCF_GPIO_PPDSDR_FEC1H_PPDR2	(0x04)	/* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */
++#define MCF_GPIO_PPDSDR_FEC1H_PPDR3	(0x08)	/* FEC1_RXCLK / ATA_DATA5 */
++#define MCF_GPIO_PPDSDR_FEC1H_PPDR4	(0x10)	/* FEC1_COL / ATA_DATA7 */
++#define MCF_GPIO_PPDSDR_FEC1H_PPDR5	(0x20)	/* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */
++#define MCF_GPIO_PPDSDR_FEC1H_PPDR6	(0x40)	/* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */
++#define MCF_GPIO_PPDSDR_FEC1H_PPDR7	(0x80)	/* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */
++
++/* Bit definitions and macros for PPDSDR_FEC1L */
++#define MCF_GPIO_PPDSDR_FEC1L_PPDR0	(0x01)	/* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */
++#define MCF_GPIO_PPDSDR_FEC1L_PPDR1	(0x02)	/* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */
++#define MCF_GPIO_PPDSDR_FEC1L_PPDR2	(0x04)	/* FEC1_RXD2 / ATA_DATA3 */
++#define MCF_GPIO_PPDSDR_FEC1L_PPDR3	(0x08)	/* FEC1_RXD3 / ATA_DATA4 */
++#define MCF_GPIO_PPDSDR_FEC1L_PPDR4	(0x10)	/* FEC1_TXER / ATA_DATA0 */
++#define MCF_GPIO_PPDSDR_FEC1L_PPDR5	(0x20)	/* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */
++#define MCF_GPIO_PPDSDR_FEC1L_PPDR6	(0x40)	/* FEC1_TXD2 / ATA_DATA1 */
++#define MCF_GPIO_PPDSDR_FEC1L_PPDR7	(0x80)	/* FEC1_TXD3 / ATA_DATA2 */
++
++/* Bit definitions and macros for PPDSDR_FBADH */
++#define MCF_GPIO_PPDSDR_FBADH_PPDR0	(0x01)	/* FB_AD24 */
++#define MCF_GPIO_PPDSDR_FBADH_PPDR1	(0x02)	/* FB_AD25 */
++#define MCF_GPIO_PPDSDR_FBADH_PPDR2	(0x04)	/* FB_AD26 */
++#define MCF_GPIO_PPDSDR_FBADH_PPDR3	(0x08)	/* FB_AD27 */
++#define MCF_GPIO_PPDSDR_FBADH_PPDR4	(0x10)	/* FB_AD28 */
++#define MCF_GPIO_PPDSDR_FBADH_PPDR5	(0x20)	/* FB_AD29 */
++#define MCF_GPIO_PPDSDR_FBADH_PPDR6	(0x40)	/* FB_AD30 */
++#define MCF_GPIO_PPDSDR_FBADH_PPDR7	(0x80)	/* FB_AD31 */
++
++/* Bit definitions and macros for PPDSDR_FBADMH */
++#define MCF_GPIO_PPDSDR_FBADMH_PPDR0	(0x01)	/* FB_AD16 */
++#define MCF_GPIO_PPDSDR_FBADMH_PPDR1	(0x02)	/* FB_AD17 */
++#define MCF_GPIO_PPDSDR_FBADMH_PPDR2	(0x04)	/* FB_AD18 */
++#define MCF_GPIO_PPDSDR_FBADMH_PPDR3	(0x08)	/* FB_AD19 */
++#define MCF_GPIO_PPDSDR_FBADMH_PPDR4	(0x10)	/* FB_AD20 */
++#define MCF_GPIO_PPDSDR_FBADMH_PPDR5	(0x20)	/* FB_AD21 */
++#define MCF_GPIO_PPDSDR_FBADMH_PPDR6	(0x40)	/* FB_AD22 */
++#define MCF_GPIO_PPDSDR_FBADMH_PPDR7	(0x80)	/* FB_AD23 */
++
++/* Bit definitions and macros for PPDSDR_FBADML */
++#define MCF_GPIO_PPDSDR_FBADML_PPDR0	(0x01)	/* FB_AD8 */
++#define MCF_GPIO_PPDSDR_FBADML_PPDR1	(0x02)	/* FB_AD9 */
++#define MCF_GPIO_PPDSDR_FBADML_PPDR2	(0x04)	/* FB_AD10 */
++#define MCF_GPIO_PPDSDR_FBADML_PPDR3	(0x08)	/* FB_AD11 */
++#define MCF_GPIO_PPDSDR_FBADML_PPDR4	(0x10)	/* FB_AD12 */
++#define MCF_GPIO_PPDSDR_FBADML_PPDR5	(0x20)	/* FB_AD13 */
++#define MCF_GPIO_PPDSDR_FBADML_PPDR6	(0x40)	/* FB_AD14 */
++#define MCF_GPIO_PPDSDR_FBADML_PPDR7	(0x80)	/* FB_AD15 */
++
++/* Bit definitions and macros for PPDSDR_FBADL */
++#define MCF_GPIO_PPDSDR_FBADL_PPDR0	(0x01)	/* FB_AD0 */
++#define MCF_GPIO_PPDSDR_FBADL_PPDR1	(0x02)	/* FB_AD1 */
++#define MCF_GPIO_PPDSDR_FBADL_PPDR2	(0x04)	/* FB_AD2 */
++#define MCF_GPIO_PPDSDR_FBADL_PPDR3	(0x08)	/* FB_AD3 */
++#define MCF_GPIO_PPDSDR_FBADL_PPDR4	(0x10)	/* FB_AD4 */
++#define MCF_GPIO_PPDSDR_FBADL_PPDR5	(0x20)	/* FB_AD5 */
++#define MCF_GPIO_PPDSDR_FBADL_PPDR6	(0x40)	/* FB_AD6 */
++#define MCF_GPIO_PPDSDR_FBADL_PPDR7	(0x80)	/* FB_AD7 */
++
++/* Bit definitions and macros for PCLRR_FEC0H */
++#define MCF_GPIO_PCLRR_FEC0H_PCLRR0	(0x01)	/* FEC0_CRS / ULPI_DATA6 */
++#define MCF_GPIO_PCLRR_FEC0H_PCLRR1	(0x02)	/* FEC0_RXD0 / FEC0_RMII_RXD0 */
++#define MCF_GPIO_PCLRR_FEC0H_PCLRR2	(0x04)	/* FEC0_RXDV/FEC0_RMII_CRS_DV */
++#define MCF_GPIO_PCLRR_FEC0H_PCLRR3	(0x08)	/* FEC0_RXCLK / ULPI_DATA1 */
++#define MCF_GPIO_PCLRR_FEC0H_PCLRR4	(0x10)	/* FEC0_COL / ULPI_DATA7 */
++#define MCF_GPIO_PCLRR_FEC0H_PCLRR5	(0x20)	/* FEC0_TXD0 / FEC0_RMII_TXD0 */
++#define MCF_GPIO_PCLRR_FEC0H_PCLRR6	(0x40)	/* FEC0_TXEN / FEC0_RMII_TXEN */
++#define MCF_GPIO_PCLRR_FEC0H_PCLRR7	(0x80)	/* FEC0_TXCLK / FEC0_RMII_REF_CLK */
++
++/* Bit definitions and macros for PCLRR_FEC0L */
++#define MCF_GPIO_PCLRR_FEC0L_PPDR0	(0x01)	/* FEC0_RXER / FEC0_RMII_RXER */
++#define MCF_GPIO_PCLRR_FEC0L_PPDR1	(0x02)	/* FEC0_RXD1 / FEC0_RMII_RXD1 */
++#define MCF_GPIO_PCLRR_FEC0L_PPDR2	(0x04)	/* FEC0_RXD2 / ULPI_DATA4 */
++#define MCF_GPIO_PCLRR_FEC0L_PPDR3	(0x08)	/* FEC0_RXD3 / ULPI_DATA5 */
++#define MCF_GPIO_PCLRR_FEC0L_PPDR4	(0x10)	/* FEC0_TXER / ULPI_DATA0 */
++#define MCF_GPIO_PCLRR_FEC0L_PPDR5	(0x20)	/* FEC0_TXD1 / FEC0_RMII_TXD1 */
++#define MCF_GPIO_PCLRR_FEC0L_PPDR6	(0x40)	/* FEC0_TXD2 / ULPI_DATA2 */
++#define MCF_GPIO_PCLRR_FEC0L_PPDR7	(0x80)	/* FEC0_TXD3 / ULPI_DATA3 */
++
++/* Bit definitions and macros for PCLRR_SSI */
++#define MCF_GPIO_PCLRR_SSI_PCLRR0	(0x01)	/* SSI_TXD / U1TXD */
++#define MCF_GPIO_PCLRR_SSI_PCLRR1	(0x02)	/* SSI_RXD / U1RXD */
++#define MCF_GPIO_PCLRR_SSI_PCLRR2	(0x04)	/* SSI_FS / U1RTS */
++#define MCF_GPIO_PCLRR_SSI_PCLRR3	(0x08)	/* SSI_BCLK / U1CTS */
++#define MCF_GPIO_PCLRR_SSI_PCLRR4	(0x10)	/* SSI_MCLK */
++
++/* Bit definitions and macros for PCLRR_FBCTL */
++#define MCF_GPIO_PCLRR_FBCTL_PCLRR0	(0x01)	/* FB_TS / FB_ALE / FB_TBST */
++#define MCF_GPIO_PCLRR_FBCTL_PCLRR1	(0x02)	/* FB_RW */
++#define MCF_GPIO_PCLRR_FBCTL_PCLRR2	(0x04)	/* FB_TA */
++#define MCF_GPIO_PCLRR_FBCTL_PCLRR3	(0x08)	/* FB_OE */
++
++/* Bit definitions and macros for PCLRR_BE */
++#define MCF_GPIO_PCLRR_BE_PCLRR0	(0x01)	/* FB_BE/BWE0 / FB_SIZ0 */
++#define MCF_GPIO_PCLRR_BE_PCLRR1	(0x02)	/* FB_BE/BWE1 / FB_SIZ1 */
++#define MCF_GPIO_PCLRR_BE_PCLRR2	(0x04)	/* FB_BE/BWE2 / FB_SIZ2 */
++#define MCF_GPIO_PCLRR_BE_PCLRR3	(0x08)	/* FB_BE/BWE3 / FB_SIZ3 */
++
++/* Bit definitions and macros for PCLRR_CS */
++#define MCF_GPIO_PCLRR_CS_PCLRR1	(0x02)	/* FB_CS1 */
++#define MCF_GPIO_PCLRR_CS_PCLRR2	(0x04)	/* FB_CS2 */
++#define MCF_GPIO_PCLRR_CS_PCLRR3	(0x08)	/* FB_CS3 */
++
++/* Bit definitions and macros for PCLRR_DMA */
++#define MCF_GPIO_PCLRR_DMA_PCLRR0	(0x01)	/* DREQ0 */
++#define MCF_GPIO_PCLRR_DMA_PCLRR1	(0x02)	/* DACK0 / DSPI_PCS3 */
++#define MCF_GPIO_PCLRR_DMA_PCLRR2	(0x04)	/* DREQ1 / USB_CLKIN */
++#define MCF_GPIO_PCLRR_DMA_PCLRR3	(0x08)	/* DACK1 / ULPI_DIR */
++
++/* Bit definitions and macros for PCLRR_FECI2C */
++#define MCF_GPIO_PCLRR_FECI2C_PCLRR0	(0x01)	/* I2C_SDA / U2RXD */
++#define MCF_GPIO_PCLRR_FECI2C_PCLRR1	(0x02)	/* I2C_SCL / U2TXD */
++#define MCF_GPIO_PCLRR_FECI2C_PCLRR2	(0x04)	/* FEC0_MDIO */
++#define MCF_GPIO_PCLRR_FECI2C_PCLRR3	(0x08)	/* FEC0_MDC */
++#define MCF_GPIO_PCLRR_FECI2C_PCLRR4	(0x10)	/* FEC1_MDIO / ATA_DIOW */
++#define MCF_GPIO_PCLRR_FECI2C_PCLRR5	(0x20)	/* FEC1_MDC / ATA_DIOR */
++
++/* Bit definitions and macros for PCLRR_UART */
++#define MCF_GPIO_PCLRR_UART_PCLRR0	(0x01)	/* U1TXD */
++#define MCF_GPIO_PCLRR_UART_PCLRR1	(0x02)	/* U1RXD */
++#define MCF_GPIO_PCLRR_UART_PCLRR2	(0x04)	/* U1RTS */
++#define MCF_GPIO_PCLRR_UART_PCLRR3	(0x08)	/* U0CTS */
++#define MCF_GPIO_PCLRR_UART_PCLRR4	(0x10)	/* U1TXD */
++#define MCF_GPIO_PCLRR_UART_PCLRR5	(0x20)	/* U1RXD */
++#define MCF_GPIO_PCLRR_UART_PCLRR6	(0x40)	/* U1RTS */
++#define MCF_GPIO_PCLRR_UART_PCLRR7	(0x80)	/* U1CTS */
++
++/* Bit definitions and macros for PCLRR_DSPI */
++#define MCF_GPIO_PCLRR_DSPI_PCLRR0	(0x01)	/* DSPI_SOUT / SBF_DO */
++#define MCF_GPIO_PCLRR_DSPI_PCLRR1	(0x02)	/* DSPI_SIN / SBF_DI */
++#define MCF_GPIO_PCLRR_DSPI_PCLRR2	(0x04)	/* DSPI_SCK / SBF_CK */
++#define MCF_GPIO_PCLRR_DSPI_PCLRR3	(0x08)	/* DSPI_PCS0/SS */
++#define MCF_GPIO_PCLRR_DSPI_PCLRR4	(0x10)	/* DSPI_PCS1 / SBF_CS */
++#define MCF_GPIO_PCLRR_DSPI_PCLRR5	(0x20)	/* DSPI_PCS2 */
++#define MCF_GPIO_PCLRR_DSPI_PCLRR6	(0x40)	/* DSPI_PCS5/SS */
++
++/* Bit definitions and macros for PCLRR_TIMER */
++#define MCF_GPIO_PCLRR_TIMER_PCLRR0	(0x01)	/* T0IN / T0OUT / U2RTS */
++#define MCF_GPIO_PCLRR_TIMER_PCLRR1	(0x02)	/* T1IN / T1OUT / U2CTS */
++#define MCF_GPIO_PCLRR_TIMER_PCLRR2	(0x04)	/* T2IN / T2OUT / U2TXD */
++#define MCF_GPIO_PCLRR_TIMER_PCLRR3	(0x08)	/* T3IN / T3OUT / U2RXD */
++
++/* Bit definitions and macros for PCLRR_PCI */
++#define MCF_GPIO_PCLRR_PCI_PCLRR0	(0x01)	/* PCI_REQ0/PCI_EXTGNT */
++#define MCF_GPIO_PCLRR_PCI_PCLRR1	(0x02)	/* PCI_REQ1 */
++#define MCF_GPIO_PCLRR_PCI_PCLRR2	(0x04)	/* PCI_REQ2 */
++#define MCF_GPIO_PCLRR_PCI_PCLRR3	(0x08)	/* PCI_REQ3 / ATA_INTR */
++#define MCF_GPIO_PCLRR_PCI_PCLRR4	(0x10)	/* PCI_GNT0/PCI_EXTREQ */
++#define MCF_GPIO_PCLRR_PCI_PCLRR5	(0x20)	/* PCI_GNT1 /  */
++#define MCF_GPIO_PCLRR_PCI_PCLRR6	(0x40)	/* PCI_GNT2 /  */
++#define MCF_GPIO_PCLRR_PCI_PCLRR7	(0x80)	/* PCI_GNT3 / ATA_DMACK */
++
++/* Bit definitions and macros for PCLRR_USB */
++#define MCF_GPIO_PCLRR_USB_PCLRR0	(0x01)	/* USB_VBUS_OC / ULPI_STP */
++#define MCF_GPIO_PCLRR_USB_PCLRR1	(0x02)	/* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */
++
++/* Bit definitions and macros for PCLRR_ATAH */
++#define MCF_GPIO_PCLRR_ATAH_PCLRR0	(0x01)	/* ATA_DA0 */
++#define MCF_GPIO_PCLRR_ATAH_PCLRR1	(0x02)	/* ATA_DA1 */
++#define MCF_GPIO_PCLRR_ATAH_PCLRR2	(0x04)	/* ATA_DA2 */
++#define MCF_GPIO_PCLRR_ATAH_PCLRR3	(0x08)	/* ATA_CS0 */
++#define MCF_GPIO_PCLRR_ATAH_PCLRR4	(0x10)	/* ATA_CS1 */
++#define MCF_GPIO_PCLRR_ATAH_PCLRR5	(0x20)	/* ATA_BUFFER_EN */
++
++/* Bit definitions and macros for PCLRR_ATAL */
++#define MCF_GPIO_PCLRR_ATAL_PCLRR0	(0x01)	/* ATA_IORDY */
++#define MCF_GPIO_PCLRR_ATAL_PCLRR1	(0x02)	/* ATA_DMARQ */
++#define MCF_GPIO_PCLRR_ATAL_PCLRR2	(0x04)	/* ATA_RESET */
++
++/* Bit definitions and macros for PCLRR_FEC1H */
++#define MCF_GPIO_PCLRR_FEC1H_PCLRR0	(0x01)	/* FEC1_CRS / ATA_DATA6 */
++#define MCF_GPIO_PCLRR_FEC1H_PCLRR1	(0x02)	/* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */
++#define MCF_GPIO_PCLRR_FEC1H_PCLRR2	(0x04)	/* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */
++#define MCF_GPIO_PCLRR_FEC1H_PCLRR3	(0x08)	/* FEC1_RXCLK / ATA_DATA5 */
++#define MCF_GPIO_PCLRR_FEC1H_PCLRR4	(0x10)	/* FEC1_COL / ATA_DATA7 */
++#define MCF_GPIO_PCLRR_FEC1H_PCLRR5	(0x20)	/* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */
++#define MCF_GPIO_PCLRR_FEC1H_PCLRR6	(0x40)	/* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */
++#define MCF_GPIO_PCLRR_FEC1H_PCLRR7	(0x80)	/* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */
++
++/* Bit definitions and macros for PCLRR_FEC1L */
++#define MCF_GPIO_PCLRR_FEC1L_PCLRR0	(0x01)	/* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */
++#define MCF_GPIO_PCLRR_FEC1L_PCLRR1	(0x02)	/* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */
++#define MCF_GPIO_PCLRR_FEC1L_PCLRR2	(0x04)	/* FEC1_RXD2 / ATA_DATA3 */
++#define MCF_GPIO_PCLRR_FEC1L_PCLRR3	(0x08)	/* FEC1_RXD3 / ATA_DATA4 */
++#define MCF_GPIO_PCLRR_FEC1L_PCLRR4	(0x10)	/* FEC1_TXER / ATA_DATA0 */
++#define MCF_GPIO_PCLRR_FEC1L_PCLRR5	(0x20)	/* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */
++#define MCF_GPIO_PCLRR_FEC1L_PCLRR6	(0x40)	/* FEC1_TXD2 / ATA_DATA1 */
++#define MCF_GPIO_PCLRR_FEC1L_PCLRR7	(0x80)	/* FEC1_TXD3 / ATA_DATA2 */
++
++/* Bit definitions and macros for PCLRR_FBADH */
++#define MCF_GPIO_PCLRR_FBADH_PCLRR0	(0x01)	/* FB_AD24 */
++#define MCF_GPIO_PCLRR_FBADH_PCLRR1	(0x02)	/* FB_AD25 */
++#define MCF_GPIO_PCLRR_FBADH_PCLRR2	(0x04)	/* FB_AD26 */
++#define MCF_GPIO_PCLRR_FBADH_PCLRR3	(0x08)	/* FB_AD27 */
++#define MCF_GPIO_PCLRR_FBADH_PCLRR4	(0x10)	/* FB_AD28 */
++#define MCF_GPIO_PCLRR_FBADH_PCLRR5	(0x20)	/* FB_AD29 */
++#define MCF_GPIO_PCLRR_FBADH_PCLRR6	(0x40)	/* FB_AD30 */
++#define MCF_GPIO_PCLRR_FBADH_PCLRR7	(0x80)	/* FB_AD31 */
++
++/* Bit definitions and macros for PCLRR_FBADMH */
++#define MCF_GPIO_PCLRR_FBADMH_PCLRR0	(0x01)	/* FB_AD16 */
++#define MCF_GPIO_PCLRR_FBADMH_PCLRR1	(0x02)	/* FB_AD17 */
++#define MCF_GPIO_PCLRR_FBADMH_PCLRR2	(0x04)	/* FB_AD18 */
++#define MCF_GPIO_PCLRR_FBADMH_PCLRR3	(0x08)	/* FB_AD19 */
++#define MCF_GPIO_PCLRR_FBADMH_PCLRR4	(0x10)	/* FB_AD20 */
++#define MCF_GPIO_PCLRR_FBADMH_PCLRR5	(0x20)	/* FB_AD21 */
++#define MCF_GPIO_PCLRR_FBADMH_PCLRR6	(0x40)	/* FB_AD22 */
++#define MCF_GPIO_PCLRR_FBADMH_PCLRR7	(0x80)	/* FB_AD23 */
++
++/* Bit definitions and macros for PCLRR_FBADML */
++#define MCF_GPIO_PCLRR_FBADML_PCLRR0	(0x01)	/* FB_AD8 */
++#define MCF_GPIO_PCLRR_FBADML_PCLRR1	(0x02)	/* FB_AD9 */
++#define MCF_GPIO_PCLRR_FBADML_PCLRR2	(0x04)	/* FB_AD10 */
++#define MCF_GPIO_PCLRR_FBADML_PCLRR3	(0x08)	/* FB_AD11 */
++#define MCF_GPIO_PCLRR_FBADML_PCLRR4	(0x10)	/* FB_AD12 */
++#define MCF_GPIO_PCLRR_FBADML_PCLRR5	(0x20)	/* FB_AD13 */
++#define MCF_GPIO_PCLRR_FBADML_PCLRR6	(0x40)	/* FB_AD14 */
++#define MCF_GPIO_PCLRR_FBADML_PCLRR7	(0x80)	/* FB_AD15 */
++
++/* Bit definitions and macros for PCLRR_FBADL */
++#define MCF_GPIO_PCLRR_FBADL_PCLRR0	(0x01)	/* FB_AD0 */
++#define MCF_GPIO_PCLRR_FBADL_PCLRR1	(0x02)	/* FB_AD1 */
++#define MCF_GPIO_PCLRR_FBADL_PCLRR2	(0x04)	/* FB_AD2 */
++#define MCF_GPIO_PCLRR_FBADL_PCLRR3	(0x08)	/* FB_AD3 */
++#define MCF_GPIO_PCLRR_FBADL_PCLRR4	(0x10)	/* FB_AD4 */
++#define MCF_GPIO_PCLRR_FBADL_PCLRR5	(0x20)	/* FB_AD5 */
++#define MCF_GPIO_PCLRR_FBADL_PCLRR6	(0x40)	/* FB_AD6 */
++#define MCF_GPIO_PCLRR_FBADL_PCLRR7	(0x80)	/* FB_AD7 */
++
++/* Bit definitions and macros for PAR_FEC */
++#define MCF_GPIO_PAR_FEC_FEC0(x)	(((x)&0x07))
++#define MCF_GPIO_PAR_FEC_FEC1(x)	(((x)&0x07)<<4)
++#define MCF_GPIO_PAR_FEC_FEC1_MASK	(0x8F)
++#define MCF_GPIO_PAR_FEC_FEC1_MII	(0x70)
++#define MCF_GPIO_PAR_FEC_FEC1_RMII_GPIO	(0x30)
++#define MCF_GPIO_PAR_FEC_FEC1_RMII_ATA	(0x20)
++#define MCF_GPIO_PAR_FEC_FEC1_ATA	(0x10)
++#define MCF_GPIO_PAR_FEC_FEC1_GPIO	(0x00)
++#define MCF_GPIO_PAR_FEC_FEC0_MASK	(0xF8)
++#define MCF_GPIO_PAR_FEC_FEC0_MII	(0x07)
++#define MCF_GPIO_PAR_FEC_FEC0_RMII_GPIO	(0x03)
++#define MCF_GPIO_PAR_FEC_FEC0_RMII_ULPI	(0x02)
++#define MCF_GPIO_PAR_FEC_FEC0_ULPI	(0x01)
++#define MCF_GPIO_PAR_FEC_FEC0_GPIO	(0x00)
++
++/* Bit definitions and macros for PAR_DMA */
++#define MCF_GPIO_PAR_DMA_DREQ0		(0x01)
++#define MCF_GPIO_PAR_DMA_DACK0(x)	(((x)&0x03)<<2)
++#define MCF_GPIO_PAR_DMA_DREQ1(x)	(((x)&0x03)<<4)
++#define MCF_GPIO_PAR_DMA_DACK1(x)	(((x)&0x03)<<6)
++#define MCF_GPIO_PAR_DMA_DACK1_MASK	(0x3F)
++#define MCF_GPIO_PAR_DMA_DACK1_DACK1	(0xC0)
++#define MCF_GPIO_PAR_DMA_DACK1_ULPI_DIR	(0x40)
++#define MCF_GPIO_PAR_DMA_DACK1_GPIO	(0x00)
++#define MCF_GPIO_PAR_DMA_DREQ1_MASK	(0xCF)
++#define MCF_GPIO_PAR_DMA_DREQ1_DREQ1	(0x30)
++#define MCF_GPIO_PAR_DMA_DREQ1_USB_CLKIN (0x10)
++#define MCF_GPIO_PAR_DMA_DREQ1_GPIO	(0x00)
++#define MCF_GPIO_PAR_DMA_DACK0_MASK	(0xF3)
++#define MCF_GPIO_PAR_DMA_DACK0_DACK1	(0x0C)
++#define MCF_GPIO_PAR_DMA_DACK0_ULPI_DIR	(0x04)
++#define MCF_GPIO_PAR_DMA_DACK0_GPIO	(0x00)
++#define MCF_GPIO_PAR_DMA_DREQ0_DREQ0	(0x01)
++#define MCF_GPIO_PAR_DMA_DREQ0_GPIO	(0x00)
++
++/* Bit definitions and macros for PAR_FBCTL */
++#define MCF_GPIO_PAR_FBCTL_TS(x)	(((x)&0x03)<<3)
++#define MCF_GPIO_PAR_FBCTL_RW		(0x20)
++#define MCF_GPIO_PAR_FBCTL_TA		(0x40)
++#define MCF_GPIO_PAR_FBCTL_OE		(0x80)
++#define MCF_GPIO_PAR_FBCTL_OE_OE	(0x80)
++#define MCF_GPIO_PAR_FBCTL_OE_GPIO	(0x00)
++#define MCF_GPIO_PAR_FBCTL_TA_TA	(0x40)
++#define MCF_GPIO_PAR_FBCTL_TA_GPIO	(0x00)
++#define MCF_GPIO_PAR_FBCTL_RW_RW	(0x20)
++#define MCF_GPIO_PAR_FBCTL_RW_GPIO	(0x00)
++#define MCF_GPIO_PAR_FBCTL_TS_MASK	(0xE7)
++#define MCF_GPIO_PAR_FBCTL_TS_TS	(0x18)
++#define MCF_GPIO_PAR_FBCTL_TS_ALE	(0x10)
++#define MCF_GPIO_PAR_FBCTL_TS_TBST	(0x08)
++#define MCF_GPIO_PAR_FBCTL_TS_GPIO	(0x80)
++
++/* Bit definitions and macros for PAR_DSPI */
++#define MCF_GPIO_PAR_DSPI_SCK		(0x01)
++#define MCF_GPIO_PAR_DSPI_SOUT		(0x02)
++#define MCF_GPIO_PAR_DSPI_SIN		(0x04)
++#define MCF_GPIO_PAR_DSPI_PCS0		(0x08)
++#define MCF_GPIO_PAR_DSPI_PCS1		(0x10)
++#define MCF_GPIO_PAR_DSPI_PCS2		(0x20)
++#define MCF_GPIO_PAR_DSPI_PCS5		(0x40)
++#define MCF_GPIO_PAR_DSPI_PCS5_PCS5	(0x40)
++#define MCF_GPIO_PAR_DSPI_PCS5_GPIO	(0x00)
++#define MCF_GPIO_PAR_DSPI_PCS2_PCS2	(0x20)
++#define MCF_GPIO_PAR_DSPI_PCS2_GPIO	(0x00)
++#define MCF_GPIO_PAR_DSPI_PCS1_PCS1	(0x10)
++#define MCF_GPIO_PAR_DSPI_PCS1_GPIO	(0x00)
++#define MCF_GPIO_PAR_DSPI_PCS0_PCS0	(0x08)
++#define MCF_GPIO_PAR_DSPI_PCS0_GPIO	(0x00)
++#define MCF_GPIO_PAR_DSPI_SIN_SIN	(0x04)
++#define MCF_GPIO_PAR_DSPI_SIN_GPIO	(0x00)
++#define MCF_GPIO_PAR_DSPI_SOUT_SOUT	(0x02)
++#define MCF_GPIO_PAR_DSPI_SOUT_GPIO	(0x00)
++#define MCF_GPIO_PAR_DSPI_SCK_SCK	(0x01)
++#define MCF_GPIO_PAR_DSPI_SCK_GPIO	(0x00)
++
++/* Bit definitions and macros for PAR_BE */
++#define MCF_GPIO_PAR_BE_BE0		(0x01)
++#define MCF_GPIO_PAR_BE_BE1		(0x04)
++#define MCF_GPIO_PAR_BE_BE2(x)		(((x)&0x03)<<4)
++#define MCF_GPIO_PAR_BE_BE3(x)		(((x)&0x03)<<6)
++#define MCF_GPIO_PAR_BE_BE3_MASK	(0x3F)
++#define MCF_GPIO_PAR_BE_BE3_BE3		(0xC0)
++#define MCF_GPIO_PAR_BE_BE3_TSIZ1	(0x80)
++#define MCF_GPIO_PAR_BE_BE3_GPIO	(0x00)
++#define MCF_GPIO_PAR_BE_BE2_MASK	(0xCF)
++#define MCF_GPIO_PAR_BE_BE2_BE2		(0x30)
++#define MCF_GPIO_PAR_BE_BE2_TSIZ0	(0x20)
++#define MCF_GPIO_PAR_BE_BE2_GPIO	(0x00)
++#define MCF_GPIO_PAR_BE_BE1_BE1		(0x04)
++#define MCF_GPIO_PAR_BE_BE1_GPIO	(0x00)
++#define MCF_GPIO_PAR_BE_BE0_BE0		(0x01)
++#define MCF_GPIO_PAR_BE_BE0_GPIO	(0x00)
++
++/* Bit definitions and macros for PAR_CS */
++#define MCF_GPIO_PAR_CS_CS1		(0x02)
++#define MCF_GPIO_PAR_CS_CS2		(0x04)
++#define MCF_GPIO_PAR_CS_CS3		(0x08)
++#define MCF_GPIO_PAR_CS_CS3_CS3		(0x08)
++#define MCF_GPIO_PAR_CS_CS3_GPIO	(0x00)
++#define MCF_GPIO_PAR_CS_CS2_CS2		(0x04)
++#define MCF_GPIO_PAR_CS_CS2_GPIO	(0x00)
++#define MCF_GPIO_PAR_CS_CS1_CS1		(0x02)
++#define MCF_GPIO_PAR_CS_CS1_GPIO	(0x00)
++
++/* Bit definitions and macros for PAR_TIMER */
++#define MCF_GPIO_PAR_TIMER_T0IN(x)	(((x)&0x03))
++#define MCF_GPIO_PAR_TIMER_T1IN(x)	(((x)&0x03)<<2)
++#define MCF_GPIO_PAR_TIMER_T2IN(x)	(((x)&0x03)<<4)
++#define MCF_GPIO_PAR_TIMER_T3IN(x)	(((x)&0x03)<<6)
++#define MCF_GPIO_PAR_TIMER_T3IN_MASK	(0x3F)
++#define MCF_GPIO_PAR_TIMER_T3IN_T3IN	(0xC0)
++#define MCF_GPIO_PAR_TIMER_T3IN_T3OUT	(0x80)
++#define MCF_GPIO_PAR_TIMER_T3IN_U2RXD	(0x40)
++#define MCF_GPIO_PAR_TIMER_T3IN_GPIO	(0x00)
++#define MCF_GPIO_PAR_TIMER_T2IN_MASK	(0xCF)
++#define MCF_GPIO_PAR_TIMER_T2IN_T2IN	(0x30)
++#define MCF_GPIO_PAR_TIMER_T2IN_T2OUT	(0x20)
++#define MCF_GPIO_PAR_TIMER_T2IN_U2TXD	(0x10)
++#define MCF_GPIO_PAR_TIMER_T2IN_GPIO	(0x00)
++#define MCF_GPIO_PAR_TIMER_T1IN_MASK	(0xF3)
++#define MCF_GPIO_PAR_TIMER_T1IN_T1IN	(0x0C)
++#define MCF_GPIO_PAR_TIMER_T1IN_T1OUT	(0x08)
++#define MCF_GPIO_PAR_TIMER_T1IN_U2CTS	(0x04)
++#define MCF_GPIO_PAR_TIMER_T1IN_GPIO	(0x00)
++#define MCF_GPIO_PAR_TIMER_T0IN_MASK	(0xFC)
++#define MCF_GPIO_PAR_TIMER_T0IN_T0IN	(0x03)
++#define MCF_GPIO_PAR_TIMER_T0IN_T0OUT	(0x02)
++#define MCF_GPIO_PAR_TIMER_T0IN_U2RTS	(0x01)
++#define MCF_GPIO_PAR_TIMER_T0IN_GPIO	(0x00)
++
++/* Bit definitions and macros for PAR_USB */
++#define MCF_GPIO_PAR_USB_VBUSOC(x)		(((x)&0x03))
++#define MCF_GPIO_PAR_USB_VBUSEN(x)		(((x)&0x03)<<2)
++#define MCF_GPIO_PAR_USB_VBUSEN_MASK		(0xF3)
++#define MCF_GPIO_PAR_USB_VBUSEN_VBUSEN		(0x0C)
++#define MCF_GPIO_PAR_USB_VBUSEN_USBPULLUP	(0x08)
++#define MCF_GPIO_PAR_USB_VBUSEN_ULPI_NXT	(0x04)
++#define MCF_GPIO_PAR_USB_VBUSEN_GPIO		(0x00)
++#define MCF_GPIO_PAR_USB_VBUSOC_MASK		(0xFC)
++#define MCF_GPIO_PAR_USB_VBUSOC_VBUSOC		(0x03)
++#define MCF_GPIO_PAR_USB_VBUSOC_ULPI_STP	(0x01)
++#define MCF_GPIO_PAR_USB_VBUSOC_GPIO		(0x00)
++
++/* Bit definitions and macros for PAR_UART */
++#define MCF_GPIO_PAR_UART_U0TXD		(0x01)
++#define MCF_GPIO_PAR_UART_U0RXD		(0x02)
++#define MCF_GPIO_PAR_UART_U0RTS		(0x04)
++#define MCF_GPIO_PAR_UART_U0CTS		(0x08)
++#define MCF_GPIO_PAR_UART_U1TXD		(0x10)
++#define MCF_GPIO_PAR_UART_U1RXD		(0x20)
++#define MCF_GPIO_PAR_UART_U1RTS		(0x40)
++#define MCF_GPIO_PAR_UART_U1CTS		(0x80)
++#define MCF_GPIO_PAR_UART_U1CTS_U1CTS	(0x80)
++#define MCF_GPIO_PAR_UART_U1CTS_GPIO	(0x00)
++#define MCF_GPIO_PAR_UART_U1RTS_U1RTS	(0x40)
++#define MCF_GPIO_PAR_UART_U1RTS_GPIO	(0x00)
++#define MCF_GPIO_PAR_UART_U1RXD_U1RXD	(0x20)
++#define MCF_GPIO_PAR_UART_U1RXD_GPIO	(0x00)
++#define MCF_GPIO_PAR_UART_U1TXD_U1TXD	(0x10)
++#define MCF_GPIO_PAR_UART_U1TXD_GPIO	(0x00)
++#define MCF_GPIO_PAR_UART_U0CTS_U0CTS	(0x08)
++#define MCF_GPIO_PAR_UART_U0CTS_GPIO	(0x00)
++#define MCF_GPIO_PAR_UART_U0RTS_U0RTS	(0x04)
++#define MCF_GPIO_PAR_UART_U0RTS_GPIO	(0x00)
++#define MCF_GPIO_PAR_UART_U0RXD_U0RXD	(0x02)
++#define MCF_GPIO_PAR_UART_U0RXD_GPIO	(0x00)
++#define MCF_GPIO_PAR_UART_U0TXD_U0TXD	(0x01)
++#define MCF_GPIO_PAR_UART_U0TXD_GPIO	(0x00)
++
++/* Bit definitions and macros for PAR_FECI2C */
++#define MCF_GPIO_PAR_FECI2C_SDA(x)	(((x)&0x0003))
++#define MCF_GPIO_PAR_FECI2C_SCL(x)	(((x)&0x0003)<<2)
++#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x)	(((x)&0x0003))
++#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x)	(((x)&0x0003)<<2)
++#define MCF_GPIO_PAR_FECI2C_MDIO0	(0x0010)
++#define MCF_GPIO_PAR_FECI2C_MDC0	(0x0040)
++#define MCF_GPIO_PAR_FECI2C_MDIO1(x)	(((x)&0x0003)<<8)
++#define MCF_GPIO_PAR_FECI2C_MDC1(x)	(((x)&0x0003)<<10)
++#define MCF_GPIO_PAR_FECI2C_MDC1_MASK	(0xF3FF)
++#define MCF_GPIO_PAR_FECI2C_MDC1_MDC1	(0x0C00)
++#define MCF_GPIO_PAR_FECI2C_MDC1_ATA_DIOR (0x0800)
++#define MCF_GPIO_PAR_FECI2C_MDC1_GPIO	(0x0000)
++#define MCF_GPIO_PAR_FECI2C_MDIO1_MASK	(0xFCFF)
++#define MCF_GPIO_PAR_FECI2C_MDIO1_MDIO1	(0x0300)
++#define MCF_GPIO_PAR_FECI2C_MDIO1_ATA_DIOW (0x0200)
++#define MCF_GPIO_PAR_FECI2C_MDIO1_GPIO	(0x0000)
++#define MCF_GPIO_PAR_FECI2C_MDC0_MDC0	(0x0040)
++#define MCF_GPIO_PAR_FECI2C_MDC0_GPIO	(0x0000)
++#define MCF_GPIO_PAR_FECI2C_MDIO0_MDIO0	(0x0010)
++#define MCF_GPIO_PAR_FECI2C_MDIO0_GPIO	(0x0000)
++#define MCF_GPIO_PAR_FECI2C_SCL_MASK	(0xFFF3)
++#define MCF_GPIO_PAR_FECI2C_SCL_SCL	(0x000C)
++#define MCF_GPIO_PAR_FECI2C_SCL_U2TXD	(0x0004)
++#define MCF_GPIO_PAR_FECI2C_SCL_GPIO	(0x0000)
++#define MCF_GPIO_PAR_FECI2C_SDA_MASK	(0xFFFC)
++#define MCF_GPIO_PAR_FECI2C_SDA_SDA	(0x0003)
++#define MCF_GPIO_PAR_FECI2C_SDA_U2RXD	(0x0001)
++#define MCF_GPIO_PAR_FECI2C_SDA_GPIO	(0x0000)
++
++/* Bit definitions and macros for PAR_SSI */
++#define MCF_GPIO_PAR_SSI_MCLK		(0x0001)
++#define MCF_GPIO_PAR_SSI_STXD(x)	(((x)&0x0003)<<2)
++#define MCF_GPIO_PAR_SSI_SRXD(x)	(((x)&0x0003)<<4)
++#define MCF_GPIO_PAR_SSI_FS(x)		(((x)&0x0003)<<6)
++#define MCF_GPIO_PAR_SSI_BCLK(x)	(((x)&0x0003)<<8)
++#define MCF_GPIO_PAR_SSI_BCLK_MASK	(0xFCFF)
++#define MCF_GPIO_PAR_SSI_BCLK_BCLK	(0x0300)
++#define MCF_GPIO_PAR_SSI_BCLK_U1CTS	(0x0200)
++#define MCF_GPIO_PAR_SSI_BCLK_GPIO	(0x0000)
++#define MCF_GPIO_PAR_SSI_FS_MASK	(0xFF3F)
++#define MCF_GPIO_PAR_SSI_FS_FS		(0x00C0)
++#define MCF_GPIO_PAR_SSI_FS_U1RTS	(0x0080)
++#define MCF_GPIO_PAR_SSI_FS_GPIO	(0x0000)
++#define MCF_GPIO_PAR_SSI_SRXD_MASK	(0xFFCF)
++#define MCF_GPIO_PAR_SSI_SRXD_SRXD	(0x0030)
++#define MCF_GPIO_PAR_SSI_SRXD_U1RXD	(0x0020)
++#define MCF_GPIO_PAR_SSI_SRXD_GPIO	(0x0000)
++#define MCF_GPIO_PAR_SSI_STXD_MASK	(0xFFF3)
++#define MCF_GPIO_PAR_SSI_STXD_STXD	(0x000C)
++#define MCF_GPIO_PAR_SSI_STXD_U1TXD	(0x0008)
++#define MCF_GPIO_PAR_SSI_STXD_GPIO	(0x0000)
++#define MCF_GPIO_PAR_SSI_MCLK_MCLK	(0x0001)
++#define MCF_GPIO_PAR_SSI_MCLK_GPIO	(0x0000)
++
++/* Bit definitions and macros for PAR_ATA */
++#define MCF_GPIO_PAR_ATA_IORDY		(0x0001)
++#define MCF_GPIO_PAR_ATA_DMARQ		(0x0002)
++#define MCF_GPIO_PAR_ATA_RESET		(0x0004)
++#define MCF_GPIO_PAR_ATA_DA0		(0x0020)
++#define MCF_GPIO_PAR_ATA_DA1		(0x0040)
++#define MCF_GPIO_PAR_ATA_DA2		(0x0080)
++#define MCF_GPIO_PAR_ATA_CS0		(0x0100)
++#define MCF_GPIO_PAR_ATA_CS1		(0x0200)
++#define MCF_GPIO_PAR_ATA_BUFEN		(0x0400)
++#define MCF_GPIO_PAR_ATA_BUFEN_BUFEN	(0x0400)
++#define MCF_GPIO_PAR_ATA_BUFEN_GPIO	(0x0000)
++#define MCF_GPIO_PAR_ATA_CS1_CS1	(0x0200)
++#define MCF_GPIO_PAR_ATA_CS1_GPIO	(0x0000)
++#define MCF_GPIO_PAR_ATA_CS0_CS0	(0x0100)
++#define MCF_GPIO_PAR_ATA_CS0_GPIO	(0x0000)
++#define MCF_GPIO_PAR_ATA_DA2_DA2	(0x0080)
++#define MCF_GPIO_PAR_ATA_DA2_GPIO	(0x0000)
++#define MCF_GPIO_PAR_ATA_DA1_DA1	(0x0040)
++#define MCF_GPIO_PAR_ATA_DA1_GPIO	(0x0000)
++#define MCF_GPIO_PAR_ATA_DA0_DA0	(0x0020)
++#define MCF_GPIO_PAR_ATA_DA0_GPIO	(0x0000)
++#define MCF_GPIO_PAR_ATA_RESET_RESET	(0x0004)
++#define MCF_GPIO_PAR_ATA_RESET_GPIO	(0x0000)
++#define MCF_GPIO_PAR_ATA_DMARQ_DMARQ	(0x0002)
++#define MCF_GPIO_PAR_ATA_DMARQ_GPIO	(0x0000)
++#define MCF_GPIO_PAR_ATA_IORDY_IORDY	(0x0001)
++#define MCF_GPIO_PAR_ATA_IORDY_GPIO	(0x0000)
++
++/* Bit definitions and macros for PAR_IRQ */
++#define MCF_GPIO_PAR_IRQ_IRQ1		(0x02)
++#define MCF_GPIO_PAR_IRQ_IRQ4		(0x10)
++#define MCF_GPIO_PAR_IRQ_IRQ4_IRQ4	(0x10)
++#define MCF_GPIO_PAR_IRQ_IRQ4_GPIO	(0x00)
++#define MCF_GPIO_PAR_IRQ_IRQ1_IRQ1	(0x02)
++#define MCF_GPIO_PAR_IRQ_IRQ1_GPIO	(0x00)
++
++/* Bit definitions and macros for PAR_PCI */
++#define MCF_GPIO_PAR_PCI_REQ0		(0x0001)
++#define MCF_GPIO_PAR_PCI_REQ1		(0x0004)
++#define MCF_GPIO_PAR_PCI_REQ2		(0x0010)
++#define MCF_GPIO_PAR_PCI_REQ3(x)	(((x)&0x0003)<<6)
++#define MCF_GPIO_PAR_PCI_GNT0		(0x0100)
++#define MCF_GPIO_PAR_PCI_GNT1		(0x0400)
++#define MCF_GPIO_PAR_PCI_GNT2		(0x1000)
++#define MCF_GPIO_PAR_PCI_GNT3(x)	(((x)&0x0003)<<14)
++#define MCF_GPIO_PAR_PCI_GNT3_MASK	(0x3FFF)
++#define MCF_GPIO_PAR_PCI_GNT3_GNT3	(0xC000)
++#define MCF_GPIO_PAR_PCI_GNT3_ATA_DMACK	(0x8000)
++#define MCF_GPIO_PAR_PCI_GNT3_GPIO	(0x0000)
++#define MCF_GPIO_PAR_PCI_GNT2_GNT2	(0x1000)
++#define MCF_GPIO_PAR_PCI_GNT2_GPIO	(0x0000)
++#define MCF_GPIO_PAR_PCI_GNT1_GNT1	(0x0400)
++#define MCF_GPIO_PAR_PCI_GNT1_GPIO	(0x0000)
++#define MCF_GPIO_PAR_PCI_GNT0_GNT0	(0x0100)
++#define MCF_GPIO_PAR_PCI_GNT0_GPIO	(0x0000)
++#define MCF_GPIO_PAR_PCI_REQ3_MASK	(0xFF3F)
++#define MCF_GPIO_PAR_PCI_REQ3_REQ3	(0x00C0)
++#define MCF_GPIO_PAR_PCI_REQ3_ATA_INTRQ	(0x0080)
++#define MCF_GPIO_PAR_PCI_REQ3_GPIO	(0x0000)
++#define MCF_GPIO_PAR_PCI_REQ2_REQ2	(0x0010)
++#define MCF_GPIO_PAR_PCI_REQ2_GPIO	(0x0000)
++#define MCF_GPIO_PAR_PCI_REQ1_REQ1	(0x0040)
++#define MCF_GPIO_PAR_PCI_REQ1_GPIO	(0x0000)
++#define MCF_GPIO_PAR_PCI_REQ0_REQ0	(0x0001)
++#define MCF_GPIO_PAR_PCI_REQ0_GPIO	(0x0000)
++
++/* Bit definitions and macros for MSCR_SDRAM */
++#define MCF_GPIO_MSCR_SDRAM_SDCTL(x)		(((x)&0x03))
++#define MCF_GPIO_MSCR_SDRAM_SDCLK(x)		(((x)&0x03)<<2)
++#define MCF_GPIO_MSCR_SDRAM_SDDQS(x)		(((x)&0x03)<<4)
++#define MCF_GPIO_MSCR_SDRAM_SDDATA(x)		(((x)&0x03)<<6)
++#define MCF_GPIO_MSCR_SDRAM_SDDATA_MASK		(0x3F)
++#define MCF_GPIO_MSCR_SDRAM_SDDATA_DDR1		(0xC0)
++#define MCF_GPIO_MSCR_SDRAM_SDDATA_DDR2		(0x80)
++#define MCF_GPIO_MSCR_SDRAM_SDDATA_FS_LPDDR	(0x40)
++#define MCF_GPIO_MSCR_SDRAM_SDDATA_HS_LPDDR	(0x00)
++#define MCF_GPIO_MSCR_SDRAM_SDDQS_MASK		(0xCF)
++#define MCF_GPIO_MSCR_SDRAM_SDDQS_DDR1		(0x30)
++#define MCF_GPIO_MSCR_SDRAM_SDDQS_DDR2		(0x20)
++#define MCF_GPIO_MSCR_SDRAM_SDDQS_FS_LPDDR	(0x10)
++#define MCF_GPIO_MSCR_SDRAM_SDDQS_HS_LPDDR	(0x00)
++#define MCF_GPIO_MSCR_SDRAM_SDCLK_MASK		(0xF3)
++#define MCF_GPIO_MSCR_SDRAM_SDCLK_DDR1		(0x0C)
++#define MCF_GPIO_MSCR_SDRAM_SDCLK_DDR2		(0x08)
++#define MCF_GPIO_MSCR_SDRAM_SDCLK_FS_LPDDR	(0x04)
++#define MCF_GPIO_MSCR_SDRAM_SDCLK_HS_LPDDR	(0x00)
++#define MCF_GPIO_MSCR_SDRAM_SDCTL_MASK		(0xFC)
++#define MCF_GPIO_MSCR_SDRAM_SDCTL_DDR1		(0x03)
++#define MCF_GPIO_MSCR_SDRAM_SDCTL_DDR2		(0x02)
++#define MCF_GPIO_MSCR_SDRAM_SDCTL_FS_LPDDR	(0x01)
++#define MCF_GPIO_MSCR_SDRAM_SDCTL_HS_LPDDR	(0x00)
++
++/* Bit definitions and macros for MSCR_PCI */
++#define MCF_GPIO_MSCR_PCI_PCI		(0x01)
++#define MCF_GPIO_MSCR_PCI_PCI_HI_66MHZ	(0x01)
++#define MCF_GPIO_MSCR_PCI_PCI_LO_33MHZ	(0x00)
++
++/* Bit definitions and macros for DSCR_I2C */
++#define MCF_GPIO_DSCR_I2C_I2C(x)	(((x)&0x03))
++#define MCF_GPIO_DSCR_I2C_I2C_LOAD_50PF	(0x03)
++#define MCF_GPIO_DSCR_I2C_I2C_LOAD_30PF	(0x02)
++#define MCF_GPIO_DSCR_I2C_I2C_LOAD_20PF	(0x01)
++#define MCF_GPIO_DSCR_I2C_I2C_LOAD_10PF	(0x00)
++
++/* Bit definitions and macros for DSCR_FLEXBUS */
++#define MCF_GPIO_DSCR_FLEXBUS_FBADL(x)		(((x)&0x03))
++#define MCF_GPIO_DSCR_FLEXBUS_FBADH(x)		(((x)&0x03)<<2)
++#define MCF_GPIO_DSCR_FLEXBUS_FBCTL(x)		(((x)&0x03)<<4)
++#define MCF_GPIO_DSCR_FLEXBUS_FBCLK(x)		(((x)&0x03)<<6)
++#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_50PF	(0xC0)
++#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_30P	(0x80)
++#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_20PF	(0x40)
++#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_10PF	(0x00)
++#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_50PF	(0x30)
++#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_30PF	(0x20)
++#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_20PF	(0x10)
++#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_10PF	(0x00)
++#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_50PF	(0x0C)
++#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_30PF	(0x08)
++#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_20PF	(0x04)
++#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_10PF	(0x00)
++#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_50PF	(0x03)
++#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_30PF	(0x02)
++#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_20PF	(0x01)
++#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_10PF	(0x00)
++
++/* Bit definitions and macros for DSCR_FEC */
++#define MCF_GPIO_DSCR_FEC_FEC0(x)		(((x)&0x03))
++#define MCF_GPIO_DSCR_FEC_FEC1(x)		(((x)&0x03)<<2)
++#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_50PF	(0x0C)
++#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_30PF	(0x08)
++#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_20PF	(0x04)
++#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_10PF	(0x00)
++#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_50PF	(0x03)
++#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_30PF	(0x02)
++#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_20PF	(0x01)
++#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_10PF	(0x00)
++
++/* Bit definitions and macros for DSCR_UART */
++#define MCF_GPIO_DSCR_UART_UART0(x)		(((x)&0x03))
++#define MCF_GPIO_DSCR_UART_UART1(x)		(((x)&0x03)<<2)
++#define MCF_GPIO_DSCR_UART_UART1_LOAD_50PF	(0x0C)
++#define MCF_GPIO_DSCR_UART_UART1_LOAD_30PF	(0x08)
++#define MCF_GPIO_DSCR_UART_UART1_LOAD_20PF	(0x04)
++#define MCF_GPIO_DSCR_UART_UART1_LOAD_10PF	(0x00)
++#define MCF_GPIO_DSCR_UART_UART0_LOAD_50PF	(0x03)
++#define MCF_GPIO_DSCR_UART_UART0_LOAD_30PF	(0x02)
++#define MCF_GPIO_DSCR_UART_UART0_LOAD_20PF	(0x01)
++#define MCF_GPIO_DSCR_UART_UART0_LOAD_10PF	(0x00)
++
++/* Bit definitions and macros for DSCR_DSPI */
++#define MCF_GPIO_DSCR_DSPI_DSPI(x)		(((x)&0x03))
++#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_50PF	(0x03)
++#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_30PF	(0x02)
++#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_20PF	(0x01)
++#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_10PF	(0x00)
++
++/* Bit definitions and macros for DSCR_TIMER */
++#define MCF_GPIO_DSCR_TIMER_TIMER(x)		(((x)&0x03))
++#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_50PF	(0x03)
++#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_30PF	(0x02)
++#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_20PF	(0x01)
++#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_10PF	(0x00)
++
++/* Bit definitions and macros for DSCR_SSI */
++#define MCF_GPIO_DSCR_SSI_SSI(x)	(((x)&0x03))
++#define MCF_GPIO_DSCR_SSI_SSI_LOAD_50PF	(0x03)
++#define MCF_GPIO_DSCR_SSI_SSI_LOAD_30PF	(0x02)
++#define MCF_GPIO_DSCR_SSI_SSI_LOAD_20PF (0x01)
++#define MCF_GPIO_DSCR_SSI_SSI_LOAD_10PF (0x00)
++
++/* Bit definitions and macros for DSCR_DMA */
++#define MCF_GPIO_DSCR_DMA_DMA(x)	(((x)&0x03))
++#define MCF_GPIO_DSCR_DMA_DMA_LOAD_50PF	(0x03)
++#define MCF_GPIO_DSCR_DMA_DMA_LOAD_30PF	(0x02)
++#define MCF_GPIO_DSCR_DMA_DMA_LOAD_20PF	(0x01)
++#define MCF_GPIO_DSCR_DMA_DMA_LOAD_10PF	(0x00)
++
++/* Bit definitions and macros for DSCR_DEBUG */
++#define MCF_GPIO_DSCR_DEBUG_DEBUG(x)		(((x)&0x03))
++#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_50PF	(0x03)
++#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_30PF	(0x02)
++#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_20PF	(0x01)
++#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_10PF	(0x00)
++
++/* Bit definitions and macros for DSCR_RESET */
++#define MCF_GPIO_DSCR_RESET_RESET(x)		(((x)&0x03))
++#define MCF_GPIO_DSCR_RESET_RESET_LOAD_50PF	(0x03)
++#define MCF_GPIO_DSCR_RESET_RESET_LOAD_30PF	(0x02)
++#define MCF_GPIO_DSCR_RESET_RESET_LOAD_20PF	(0x01)
++#define MCF_GPIO_DSCR_RESET_RESET_LOAD_10PF	(0x00)
++
++/* Bit definitions and macros for DSCR_IRQ */
++#define MCF_GPIO_DSCR_IRQ_IRQ(x)	(((x)&0x03))
++#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_50PF	(0x03)
++#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_30PF	(0x02)
++#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_20PF	(0x01)
++#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_10PF	(0x00)
++
++/* Bit definitions and macros for DSCR_USB */
++#define MCF_GPIO_DSCR_USB_USB(x)	(((x)&0x03))
++#define MCF_GPIO_DSCR_USB_USB_LOAD_50PF	(0x03)
++#define MCF_GPIO_DSCR_USB_USB_LOAD_30PF	(0x02)
++#define MCF_GPIO_DSCR_USB_USB_LOAD_20PF	(0x01)
++#define MCF_GPIO_DSCR_USB_USB_LOAD_10PF	(0x00)
++
++/* Bit definitions and macros for DSCR_ATA */
++#define MCF_GPIO_DSCR_ATA_ATA(x)	(((x)&0x03))
++#define MCF_GPIO_DSCR_ATA_ATA_LOAD_50PF	(0x03)
++#define MCF_GPIO_DSCR_ATA_ATA_LOAD_30PF	(0x02)
++#define MCF_GPIO_DSCR_ATA_ATA_LOAD_20PF	(0x01)
++#define MCF_GPIO_DSCR_ATA_ATA_LOAD_10PF	(0x00)
++
++/********************************************************************/
++
++#endif /* __MCF5445X_GPIO_H__ */
+--- /dev/null
++++ b/include/asm-m68k/mcf5445x_i2c.h
+@@ -0,0 +1,39 @@
++/*
++ * Matt Waddel Matt.Waddel@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __MCF5445X_I2C_H__
++#define __MCF5445X_I2C_H__
++
++/*********************************************************************
++*
++* I2C Module (I2C)
++*
++*********************************************************************/
++
++/* Register read/write macros */
++#define MCF_I2C_I2ADR	(volatile u8 *)(0xFC058000)
++#define MCF_I2C_I2FDR	(volatile u8 *)(0xFC058004)
++#define MCF_I2C_I2CR	(volatile u8 *)(0xFC058008)
++#define MCF_I2C_I2SR	(volatile u8 *)(0xFC05800C)
++#define MCF_I2C_I2DR	(volatile u8 *)(0xFC058010)
++
++/* Bit definitions and macros for I2AR */
++#define MCF_I2C_I2AR_ADR(x)	(((x)&0x7F)<<1)
++
++/* Bit definitions and macros for I2FDR */
++#define MCF_I2C_I2FDR_IC(x)	(((x)&0x3F))
++
++/* Bit definitions and macros for I2DR */
++#define MCF_I2C_I2DR_DATA(x)	(x)
++
++/********************************************************************/
++
++#endif /* __MCF5445X_I2C_H__ */
+--- /dev/null
++++ b/include/asm-m68k/mcf5445x_intc.h
+@@ -0,0 +1,724 @@
++/*
++ * Matt Waddel Matt.Waddel@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __MCF5445X_INTC_H__
++#define __MCF5445X_INTC_H__
++
++/*********************************************************************
++*
++* Interrupt Controller (INTC)
++*
++*********************************************************************/
++
++/* Register read/write macros */
++#define MCF_INTC0_IPRH          MCF_REG32(0xFC048000)
++#define MCF_INTC0_IPRL          MCF_REG32(0xFC048004)
++#define MCF_INTC0_IMRH          MCF_REG32(0xFC048008)
++#define MCF_INTC0_IMRL          MCF_REG32(0xFC04800C)
++#define MCF_INTC0_INTFRCH       MCF_REG32(0xFC048010)
++#define MCF_INTC0_INTFRCL       MCF_REG32(0xFC048014)
++#define MCF_INTC0_ICONFIG       MCF_REG16(0xFC04801A)
++#define MCF_INTC0_SIMR          MCF_REG08(0xFC04801C)
++#define MCF_INTC0_CIMR          MCF_REG08(0xFC04801D)
++#define MCF_INTC0_CLMASK        MCF_REG08(0xFC04801E)
++#define MCF_INTC0_SLMASK        MCF_REG08(0xFC04801F)
++#define MCF_INTC0_ICR1          MCF_REG08(0xFC048041)
++#define MCF_INTC0_ICR2          MCF_REG08(0xFC048042)
++#define MCF_INTC0_ICR3          MCF_REG08(0xFC048043)
++#define MCF_INTC0_ICR4          MCF_REG08(0xFC048044)
++#define MCF_INTC0_ICR5          MCF_REG08(0xFC048045)
++#define MCF_INTC0_ICR6          MCF_REG08(0xFC048046)
++#define MCF_INTC0_ICR7          MCF_REG08(0xFC048047)
++#define MCF_INTC0_ICR8          MCF_REG08(0xFC048048)
++#define MCF_INTC0_ICR9          MCF_REG08(0xFC048049)
++#define MCF_INTC0_ICR10         MCF_REG08(0xFC04804A)
++#define MCF_INTC0_ICR11         MCF_REG08(0xFC04804B)
++#define MCF_INTC0_ICR12         MCF_REG08(0xFC04804C)
++#define MCF_INTC0_ICR13         MCF_REG08(0xFC04804D)
++#define MCF_INTC0_ICR14         MCF_REG08(0xFC04804E)
++#define MCF_INTC0_ICR15         MCF_REG08(0xFC04804F)
++#define MCF_INTC0_ICR16         MCF_REG08(0xFC048050)
++#define MCF_INTC0_ICR17         MCF_REG08(0xFC048051)
++#define MCF_INTC0_ICR18         MCF_REG08(0xFC048052)
++#define MCF_INTC0_ICR19         MCF_REG08(0xFC048053)
++#define MCF_INTC0_ICR20         MCF_REG08(0xFC048054)
++#define MCF_INTC0_ICR21         MCF_REG08(0xFC048055)
++#define MCF_INTC0_ICR22         MCF_REG08(0xFC048056)
++#define MCF_INTC0_ICR23         MCF_REG08(0xFC048057)
++#define MCF_INTC0_ICR24         MCF_REG08(0xFC048058)
++#define MCF_INTC0_ICR25         MCF_REG08(0xFC048059)
++#define MCF_INTC0_ICR26         MCF_REG08(0xFC04805A)
++#define MCF_INTC0_ICR27         MCF_REG08(0xFC04805B)
++#define MCF_INTC0_ICR28         MCF_REG08(0xFC04805C)
++#define MCF_INTC0_ICR29         MCF_REG08(0xFC04805D)
++#define MCF_INTC0_ICR30         MCF_REG08(0xFC04805E)
++#define MCF_INTC0_ICR31         MCF_REG08(0xFC04805F)
++#define MCF_INTC0_ICR32         MCF_REG08(0xFC048060)
++#define MCF_INTC0_ICR33         MCF_REG08(0xFC048061)
++#define MCF_INTC0_ICR34         MCF_REG08(0xFC048062)
++#define MCF_INTC0_ICR35         MCF_REG08(0xFC048063)
++#define MCF_INTC0_ICR36         MCF_REG08(0xFC048064)
++#define MCF_INTC0_ICR37         MCF_REG08(0xFC048065)
++#define MCF_INTC0_ICR38         MCF_REG08(0xFC048066)
++#define MCF_INTC0_ICR39         MCF_REG08(0xFC048067)
++#define MCF_INTC0_ICR40         MCF_REG08(0xFC048068)
++#define MCF_INTC0_ICR41         MCF_REG08(0xFC048069)
++#define MCF_INTC0_ICR42         MCF_REG08(0xFC04806A)
++#define MCF_INTC0_ICR43         MCF_REG08(0xFC04806B)
++#define MCF_INTC0_ICR44         MCF_REG08(0xFC04806C)
++#define MCF_INTC0_ICR45         MCF_REG08(0xFC04806D)
++#define MCF_INTC0_ICR46         MCF_REG08(0xFC04806E)
++#define MCF_INTC0_ICR47         MCF_REG08(0xFC04806F)
++#define MCF_INTC0_ICR48         MCF_REG08(0xFC048070)
++#define MCF_INTC0_ICR49         MCF_REG08(0xFC048071)
++#define MCF_INTC0_ICR50         MCF_REG08(0xFC048072)
++#define MCF_INTC0_ICR51         MCF_REG08(0xFC048073)
++#define MCF_INTC0_ICR52         MCF_REG08(0xFC048074)
++#define MCF_INTC0_ICR53         MCF_REG08(0xFC048075)
++#define MCF_INTC0_ICR54         MCF_REG08(0xFC048076)
++#define MCF_INTC0_ICR55         MCF_REG08(0xFC048077)
++#define MCF_INTC0_ICR56         MCF_REG08(0xFC048078)
++#define MCF_INTC0_ICR57         MCF_REG08(0xFC048079)
++#define MCF_INTC0_ICR58         MCF_REG08(0xFC04807A)
++#define MCF_INTC0_ICR59         MCF_REG08(0xFC04807B)
++#define MCF_INTC0_ICR60         MCF_REG08(0xFC04807C)
++#define MCF_INTC0_ICR61         MCF_REG08(0xFC04807D)
++#define MCF_INTC0_ICR62         MCF_REG08(0xFC04807E)
++#define MCF_INTC0_ICR63         MCF_REG08(0xFC04807F)
++#define MCF_INTC0_SWIACK        MCF_REG08(0xFC0480E0)
++#define MCF_INTC0_L1IACK        MCF_REG08(0xFC0480E4)
++#define MCF_INTC0_L2IACK        MCF_REG08(0xFC0480E8)
++#define MCF_INTC0_L3IACK        MCF_REG08(0xFC0480EC)
++#define MCF_INTC0_L4IACK        MCF_REG08(0xFC0480F0)
++#define MCF_INTC0_L5IACK        MCF_REG08(0xFC0480F4)
++#define MCF_INTC0_L6IACK        MCF_REG08(0xFC0480F8)
++#define MCF_INTC0_L7IACK        MCF_REG08(0xFC0480FC)
++#define MCF_INTC1_IPRH          MCF_REG32(0xFC04C000)
++#define MCF_INTC1_IPRL          MCF_REG32(0xFC04C004)
++#define MCF_INTC1_IMRH          MCF_REG32(0xFC04C008)
++#define MCF_INTC1_IMRL          MCF_REG32(0xFC04C00C)
++#define MCF_INTC1_INTFRCH       MCF_REG32(0xFC04C010)
++#define MCF_INTC1_INTFRCL       MCF_REG32(0xFC04C014)
++#define MCF_INTC1_ICONFIG       MCF_REG16(0xFC04C01A)
++#define MCF_INTC1_SIMR          MCF_REG08(0xFC04C01C)
++#define MCF_INTC1_CIMR          MCF_REG08(0xFC04C01D)
++#define MCF_INTC1_CLMASK        MCF_REG08(0xFC04C01E)
++#define MCF_INTC1_SLMASK        MCF_REG08(0xFC04C01F)
++#define MCF_INTC1_ICR1          MCF_REG08(0xFC04C041)
++#define MCF_INTC1_ICR2          MCF_REG08(0xFC04C042)
++#define MCF_INTC1_ICR3          MCF_REG08(0xFC04C043)
++#define MCF_INTC1_ICR4          MCF_REG08(0xFC04C044)
++#define MCF_INTC1_ICR5          MCF_REG08(0xFC04C045)
++#define MCF_INTC1_ICR6          MCF_REG08(0xFC04C046)
++#define MCF_INTC1_ICR7          MCF_REG08(0xFC04C047)
++#define MCF_INTC1_ICR8          MCF_REG08(0xFC04C048)
++#define MCF_INTC1_ICR9          MCF_REG08(0xFC04C049)
++#define MCF_INTC1_ICR10         MCF_REG08(0xFC04C04A)
++#define MCF_INTC1_ICR11         MCF_REG08(0xFC04C04B)
++#define MCF_INTC1_ICR12         MCF_REG08(0xFC04C04C)
++#define MCF_INTC1_ICR13         MCF_REG08(0xFC04C04D)
++#define MCF_INTC1_ICR14         MCF_REG08(0xFC04C04E)
++#define MCF_INTC1_ICR15         MCF_REG08(0xFC04C04F)
++#define MCF_INTC1_ICR16         MCF_REG08(0xFC04C050)
++#define MCF_INTC1_ICR17         MCF_REG08(0xFC04C051)
++#define MCF_INTC1_ICR18         MCF_REG08(0xFC04C052)
++#define MCF_INTC1_ICR19         MCF_REG08(0xFC04C053)
++#define MCF_INTC1_ICR20         MCF_REG08(0xFC04C054)
++#define MCF_INTC1_ICR21         MCF_REG08(0xFC04C055)
++#define MCF_INTC1_ICR22         MCF_REG08(0xFC04C056)
++#define MCF_INTC1_ICR23         MCF_REG08(0xFC04C057)
++#define MCF_INTC1_ICR24         MCF_REG08(0xFC04C058)
++#define MCF_INTC1_ICR25         MCF_REG08(0xFC04C059)
++#define MCF_INTC1_ICR26         MCF_REG08(0xFC04C05A)
++#define MCF_INTC1_ICR27         MCF_REG08(0xFC04C05B)
++#define MCF_INTC1_ICR28         MCF_REG08(0xFC04C05C)
++#define MCF_INTC1_ICR29         MCF_REG08(0xFC04C05D)
++#define MCF_INTC1_ICR30         MCF_REG08(0xFC04C05E)
++#define MCF_INTC1_ICR31         MCF_REG08(0xFC04C05F)
++#define MCF_INTC1_ICR32         MCF_REG08(0xFC04C060)
++#define MCF_INTC1_ICR33         MCF_REG08(0xFC04C061)
++#define MCF_INTC1_ICR34         MCF_REG08(0xFC04C062)
++#define MCF_INTC1_ICR35         MCF_REG08(0xFC04C063)
++#define MCF_INTC1_ICR36         MCF_REG08(0xFC04C064)
++#define MCF_INTC1_ICR37         MCF_REG08(0xFC04C065)
++#define MCF_INTC1_ICR38         MCF_REG08(0xFC04C066)
++#define MCF_INTC1_ICR39         MCF_REG08(0xFC04C067)
++#define MCF_INTC1_ICR40         MCF_REG08(0xFC04C068)
++#define MCF_INTC1_ICR41         MCF_REG08(0xFC04C069)
++#define MCF_INTC1_ICR42         MCF_REG08(0xFC04C06A)
++#define MCF_INTC1_ICR43         MCF_REG08(0xFC04C06B)
++#define MCF_INTC1_ICR44         MCF_REG08(0xFC04C06C)
++#define MCF_INTC1_ICR45         MCF_REG08(0xFC04C06D)
++#define MCF_INTC1_ICR46         MCF_REG08(0xFC04C06E)
++#define MCF_INTC1_ICR47         MCF_REG08(0xFC04C06F)
++#define MCF_INTC1_ICR48         MCF_REG08(0xFC04C070)
++#define MCF_INTC1_ICR49         MCF_REG08(0xFC04C071)
++#define MCF_INTC1_ICR50         MCF_REG08(0xFC04C072)
++#define MCF_INTC1_ICR51         MCF_REG08(0xFC04C073)
++#define MCF_INTC1_ICR52         MCF_REG08(0xFC04C074)
++#define MCF_INTC1_ICR53         MCF_REG08(0xFC04C075)
++#define MCF_INTC1_ICR54         MCF_REG08(0xFC04C076)
++#define MCF_INTC1_ICR55         MCF_REG08(0xFC04C077)
++#define MCF_INTC1_ICR56         MCF_REG08(0xFC04C078)
++#define MCF_INTC1_ICR57         MCF_REG08(0xFC04C079)
++#define MCF_INTC1_ICR58         MCF_REG08(0xFC04C07A)
++#define MCF_INTC1_ICR59         MCF_REG08(0xFC04C07B)
++#define MCF_INTC1_ICR60         MCF_REG08(0xFC04C07C)
++#define MCF_INTC1_ICR61         MCF_REG08(0xFC04C07D)
++#define MCF_INTC1_ICR62         MCF_REG08(0xFC04C07E)
++#define MCF_INTC1_ICR63         MCF_REG08(0xFC04C07F)
++#define MCF_INTC1_SWIACK        MCF_REG08(0xFC04C0E0)
++#define MCF_INTC1_L1IACK        MCF_REG08(0xFC04C0E4)
++#define MCF_INTC1_L2IACK        MCF_REG08(0xFC04C0E8)
++#define MCF_INTC1_L3IACK        MCF_REG08(0xFC04C0EC)
++#define MCF_INTC1_L4IACK        MCF_REG08(0xFC04C0F0)
++#define MCF_INTC1_L5IACK        MCF_REG08(0xFC04C0F4)
++#define MCF_INTC1_L6IACK        MCF_REG08(0xFC04C0F8
++#define MCF_INTC1_L7IACK        MCF_REG08(0xFC04C0FC)
++
++/* Parameterized register read/write macros for multiple registers */
++#define MCF_INTC0_ICR(x)        MCF_REG08(0xFC048041+((x-1)*0x001))
++#define MCF_INTC0_LIACK(x)      MCF_REG08(0xFC0480E4+((x-1)*0x004))
++#define MCF_INTC1_ICR(x)        MCF_REG08(0xFC04C041+((x-1)*0x001))
++#define MCF_INTC1_LIACK(x)      MCF_REG08(0xFC04C0E4+((x-1)*0x004))
++
++/* Parameterized register read/write macros for multiple modules */
++#define MCF_INTC_IPRH(x)        MCF_REG32(0xFC048000+((x)*0x4000))
++#define MCF_INTC_IPRL(x)        MCF_REG32(0xFC048004+((x)*0x4000))
++#define MCF_INTC_IMRH(x)        MCF_REG32(0xFC048008+((x)*0x4000))
++#define MCF_INTC_IMRL(x)        MCF_REG32(0xFC04800C+((x)*0x4000))
++#define MCF_INTC_INTFRCH(x)     MCF_REG32(0xFC048010+((x)*0x4000))
++#define MCF_INTC_INTFRCL(x)     MCF_REG32(0xFC048014+((x)*0x4000))
++#define MCF_INTC_ICONFIG(x)     MCF_REG16(0xFC04801A+((x)*0x4000))
++#define MCF_INTC_SIMR(x)        MCF_REG08(0xFC04801C+((x)*0x4000))
++#define MCF_INTC_CIMR(x)        MCF_REG08(0xFC04801D+((x)*0x4000))
++#define MCF_INTC_CLMASK(x)      MCF_REG08(0xFC04801E+((x)*0x4000))
++#define MCF_INTC_SLMASK(x)      MCF_REG08(0xFC04801F+((x)*0x4000))
++#define MCF_INTC_ICR1(x)        MCF_REG08(0xFC048041+((x)*0x4000))
++#define MCF_INTC_ICR2(x)        MCF_REG08(0xFC048042+((x)*0x4000))
++#define MCF_INTC_ICR3(x)        MCF_REG08(0xFC048043+((x)*0x4000))
++#define MCF_INTC_ICR4(x)        MCF_REG08(0xFC048044+((x)*0x4000))
++#define MCF_INTC_ICR5(x)        MCF_REG08(0xFC048045+((x)*0x4000))
++#define MCF_INTC_ICR6(x)        MCF_REG08(0xFC048046+((x)*0x4000))
++#define MCF_INTC_ICR7(x)        MCF_REG08(0xFC048047+((x)*0x4000))
++#define MCF_INTC_ICR8(x)        MCF_REG08(0xFC048048+((x)*0x4000))
++#define MCF_INTC_ICR9(x)        MCF_REG08(0xFC048049+((x)*0x4000))
++#define MCF_INTC_ICR10(x)       MCF_REG08(0xFC04804A+((x)*0x4000))
++#define MCF_INTC_ICR11(x)       MCF_REG08(0xFC04804B+((x)*0x4000))
++#define MCF_INTC_ICR12(x)       MCF_REG08(0xFC04804C+((x)*0x4000))
++#define MCF_INTC_ICR13(x)       MCF_REG08(0xFC04804D+((x)*0x4000))
++#define MCF_INTC_ICR14(x)       MCF_REG08(0xFC04804E+((x)*0x4000))
++#define MCF_INTC_ICR15(x)       MCF_REG08(0xFC04804F+((x)*0x4000))
++#define MCF_INTC_ICR16(x)       MCF_REG08(0xFC048050+((x)*0x4000))
++#define MCF_INTC_ICR17(x)       MCF_REG08(0xFC048051+((x)*0x4000))
++#define MCF_INTC_ICR18(x)       MCF_REG08(0xFC048052+((x)*0x4000))
++#define MCF_INTC_ICR19(x)       MCF_REG08(0xFC048053+((x)*0x4000))
++#define MCF_INTC_ICR20(x)       MCF_REG08(0xFC048054+((x)*0x4000))
++#define MCF_INTC_ICR21(x)       MCF_REG08(0xFC048055+((x)*0x4000))
++#define MCF_INTC_ICR22(x)       MCF_REG08(0xFC048056+((x)*0x4000))
++#define MCF_INTC_ICR23(x)       MCF_REG08(0xFC048057+((x)*0x4000))
++#define MCF_INTC_ICR24(x)       MCF_REG08(0xFC048058+((x)*0x4000))
++#define MCF_INTC_ICR25(x)       MCF_REG08(0xFC048059+((x)*0x4000))
++#define MCF_INTC_ICR26(x)       MCF_REG08(0xFC04805A+((x)*0x4000))
++#define MCF_INTC_ICR27(x)       MCF_REG08(0xFC04805B+((x)*0x4000))
++#define MCF_INTC_ICR28(x)       MCF_REG08(0xFC04805C+((x)*0x4000))
++#define MCF_INTC_ICR29(x)       MCF_REG08(0xFC04805D+((x)*0x4000))
++#define MCF_INTC_ICR30(x)       MCF_REG08(0xFC04805E+((x)*0x4000))
++#define MCF_INTC_ICR31(x)       MCF_REG08(0xFC04805F+((x)*0x4000))
++#define MCF_INTC_ICR32(x)       MCF_REG08(0xFC048060+((x)*0x4000))
++#define MCF_INTC_ICR33(x)       MCF_REG08(0xFC048061+((x)*0x4000))
++#define MCF_INTC_ICR34(x)       MCF_REG08(0xFC048062+((x)*0x4000))
++#define MCF_INTC_ICR35(x)       MCF_REG08(0xFC048063+((x)*0x4000))
++#define MCF_INTC_ICR36(x)       MCF_REG08(0xFC048064+((x)*0x4000))
++#define MCF_INTC_ICR37(x)       MCF_REG08(0xFC048065+((x)*0x4000))
++#define MCF_INTC_ICR38(x)       MCF_REG08(0xFC048066+((x)*0x4000))
++#define MCF_INTC_ICR39(x)       MCF_REG08(0xFC048067+((x)*0x4000))
++#define MCF_INTC_ICR40(x)       MCF_REG08(0xFC048068+((x)*0x4000))
++#define MCF_INTC_ICR41(x)       MCF_REG08(0xFC048069+((x)*0x4000))
++#define MCF_INTC_ICR42(x)       MCF_REG08(0xFC04806A+((x)*0x4000))
++#define MCF_INTC_ICR43(x)       MCF_REG08(0xFC04806B+((x)*0x4000))
++#define MCF_INTC_ICR44(x)       MCF_REG08(0xFC04806C+((x)*0x4000))
++#define MCF_INTC_ICR45(x)       MCF_REG08(0xFC04806D+((x)*0x4000))
++#define MCF_INTC_ICR46(x)       MCF_REG08(0xFC04806E+((x)*0x4000))
++#define MCF_INTC_ICR47(x)       MCF_REG08(0xFC04806F+((x)*0x4000))
++#define MCF_INTC_ICR48(x)       MCF_REG08(0xFC048070+((x)*0x4000))
++#define MCF_INTC_ICR49(x)       MCF_REG08(0xFC048071+((x)*0x4000))
++#define MCF_INTC_ICR50(x)       MCF_REG08(0xFC048072+((x)*0x4000))
++#define MCF_INTC_ICR51(x)       MCF_REG08(0xFC048073+((x)*0x4000))
++#define MCF_INTC_ICR52(x)       MCF_REG08(0xFC048074+((x)*0x4000))
++#define MCF_INTC_ICR53(x)       MCF_REG08(0xFC048075+((x)*0x4000))
++#define MCF_INTC_ICR54(x)       MCF_REG08(0xFC048076+((x)*0x4000))
++#define MCF_INTC_ICR55(x)       MCF_REG08(0xFC048077+((x)*0x4000))
++#define MCF_INTC_ICR56(x)       MCF_REG08(0xFC048078+((x)*0x4000))
++#define MCF_INTC_ICR57(x)       MCF_REG08(0xFC048079+((x)*0x4000))
++#define MCF_INTC_ICR58(x)       MCF_REG08(0xFC04807A+((x)*0x4000))
++#define MCF_INTC_ICR59(x)       MCF_REG08(0xFC04807B+((x)*0x4000))
++#define MCF_INTC_ICR60(x)       MCF_REG08(0xFC04807C+((x)*0x4000))
++#define MCF_INTC_ICR61(x)       MCF_REG08(0xFC04807D+((x)*0x4000))
++#define MCF_INTC_ICR62(x)       MCF_REG08(0xFC04807E+((x)*0x4000))
++#define MCF_INTC_ICR63(x)       MCF_REG08(0xFC04807F+((x)*0x4000))
++#define MCF_INTC_SWIACK(x)      MCF_REG08(0xFC0480E0+((x)*0x4000))
++#define MCF_INTC_L1IACK(x)      MCF_REG08(0xFC0480E4+((x)*0x4000))
++#define MCF_INTC_L2IACK(x)      MCF_REG08(0xFC0480E8+((x)*0x4000))
++#define MCF_INTC_L3IACK(x)      MCF_REG08(0xFC0480EC+((x)*0x4000))
++#define MCF_INTC_L4IACK(x)      MCF_REG08(0xFC0480F0+((x)*0x4000))
++#define MCF_INTC_L5IACK(x)      MCF_REG08(0xFC0480F4+((x)*0x4000))
++#define MCF_INTC_L6IACK(x)      MCF_REG08(0xFC0480F8+((x)*0x4000))
++#define MCF_INTC_L7IACK(x)      MCF_REG08(0xFC0480FC+((x)*0x4000))
++
++/* Bit definitions and macros for IPRH */
++#define MCF_INTC_IPRH_INT32     (0x00000001)
++#define MCF_INTC_IPRH_INT33     (0x00000002)
++#define MCF_INTC_IPRH_INT34     (0x00000004)
++#define MCF_INTC_IPRH_INT35     (0x00000008)
++#define MCF_INTC_IPRH_INT36     (0x00000010)
++#define MCF_INTC_IPRH_INT37     (0x00000020)
++#define MCF_INTC_IPRH_INT38     (0x00000040)
++#define MCF_INTC_IPRH_INT39     (0x00000080)
++#define MCF_INTC_IPRH_INT40     (0x00000100)
++#define MCF_INTC_IPRH_INT41     (0x00000200)
++#define MCF_INTC_IPRH_INT42     (0x00000400)
++#define MCF_INTC_IPRH_INT43     (0x00000800)
++#define MCF_INTC_IPRH_INT44     (0x00001000)
++#define MCF_INTC_IPRH_INT45     (0x00002000)
++#define MCF_INTC_IPRH_INT46     (0x00004000)
++#define MCF_INTC_IPRH_INT47     (0x00008000)
++#define MCF_INTC_IPRH_INT48     (0x00010000)
++#define MCF_INTC_IPRH_INT49     (0x00020000)
++#define MCF_INTC_IPRH_INT50     (0x00040000)
++#define MCF_INTC_IPRH_INT51     (0x00080000)
++#define MCF_INTC_IPRH_INT52     (0x00100000)
++#define MCF_INTC_IPRH_INT53     (0x00200000)
++#define MCF_INTC_IPRH_INT54     (0x00400000)
++#define MCF_INTC_IPRH_INT55     (0x00800000)
++#define MCF_INTC_IPRH_INT56     (0x01000000)
++#define MCF_INTC_IPRH_INT57     (0x02000000)
++#define MCF_INTC_IPRH_INT58     (0x04000000)
++#define MCF_INTC_IPRH_INT59     (0x08000000)
++#define MCF_INTC_IPRH_INT60     (0x10000000)
++#define MCF_INTC_IPRH_INT61     (0x20000000)
++#define MCF_INTC_IPRH_INT62     (0x40000000)
++#define MCF_INTC_IPRH_INT63     (0x80000000)
++
++/* Bit definitions and macros for IPRL */
++#define MCF_INTC_IPRL_INT0      (0x00000001)
++#define MCF_INTC_IPRL_INT1      (0x00000002)
++#define MCF_INTC_IPRL_INT2      (0x00000004)
++#define MCF_INTC_IPRL_INT3      (0x00000008)
++#define MCF_INTC_IPRL_INT4      (0x00000010)
++#define MCF_INTC_IPRL_INT5      (0x00000020)
++#define MCF_INTC_IPRL_INT6      (0x00000040)
++#define MCF_INTC_IPRL_INT7      (0x00000080)
++#define MCF_INTC_IPRL_INT8      (0x00000100)
++#define MCF_INTC_IPRL_INT9      (0x00000200)
++#define MCF_INTC_IPRL_INT10     (0x00000400)
++#define MCF_INTC_IPRL_INT11     (0x00000800)
++#define MCF_INTC_IPRL_INT12     (0x00001000)
++#define MCF_INTC_IPRL_INT13     (0x00002000)
++#define MCF_INTC_IPRL_INT14     (0x00004000)
++#define MCF_INTC_IPRL_INT15     (0x00008000)
++#define MCF_INTC_IPRL_INT16     (0x00010000)
++#define MCF_INTC_IPRL_INT17     (0x00020000)
++#define MCF_INTC_IPRL_INT18     (0x00040000)
++#define MCF_INTC_IPRL_INT19     (0x00080000)
++#define MCF_INTC_IPRL_INT20     (0x00100000)
++#define MCF_INTC_IPRL_INT21     (0x00200000)
++#define MCF_INTC_IPRL_INT22     (0x00400000)
++#define MCF_INTC_IPRL_INT23     (0x00800000)
++#define MCF_INTC_IPRL_INT24     (0x01000000)
++#define MCF_INTC_IPRL_INT25     (0x02000000)
++#define MCF_INTC_IPRL_INT26     (0x04000000)
++#define MCF_INTC_IPRL_INT27     (0x08000000)
++#define MCF_INTC_IPRL_INT28     (0x10000000)
++#define MCF_INTC_IPRL_INT29     (0x20000000)
++#define MCF_INTC_IPRL_INT30     (0x40000000)
++#define MCF_INTC_IPRL_INT31     (0x80000000)
++
++/* Bit definitions and macros for IMRH */
++#define MCF_INTC_IMRH_INT_MASK32    (0x00000001)
++#define MCF_INTC_IMRH_INT_MASK33    (0x00000002)
++#define MCF_INTC_IMRH_INT_MASK34    (0x00000004)
++#define MCF_INTC_IMRH_INT_MASK35    (0x00000008)
++#define MCF_INTC_IMRH_INT_MASK36    (0x00000010)
++#define MCF_INTC_IMRH_INT_MASK37    (0x00000020)
++#define MCF_INTC_IMRH_INT_MASK38    (0x00000040)
++#define MCF_INTC_IMRH_INT_MASK39    (0x00000080)
++#define MCF_INTC_IMRH_INT_MASK40    (0x00000100)
++#define MCF_INTC_IMRH_INT_MASK41    (0x00000200)
++#define MCF_INTC_IMRH_INT_MASK42    (0x00000400)
++#define MCF_INTC_IMRH_INT_MASK43    (0x00000800)
++#define MCF_INTC_IMRH_INT_MASK44    (0x00001000)
++#define MCF_INTC_IMRH_INT_MASK45    (0x00002000)
++#define MCF_INTC_IMRH_INT_MASK46    (0x00004000)
++#define MCF_INTC_IMRH_INT_MASK47    (0x00008000)
++#define MCF_INTC_IMRH_INT_MASK48    (0x00010000)
++#define MCF_INTC_IMRH_INT_MASK49    (0x00020000)
++#define MCF_INTC_IMRH_INT_MASK50    (0x00040000)
++#define MCF_INTC_IMRH_INT_MASK51    (0x00080000)
++#define MCF_INTC_IMRH_INT_MASK52    (0x00100000)
++#define MCF_INTC_IMRH_INT_MASK53    (0x00200000)
++#define MCF_INTC_IMRH_INT_MASK54    (0x00400000)
++#define MCF_INTC_IMRH_INT_MASK55    (0x00800000)
++#define MCF_INTC_IMRH_INT_MASK56    (0x01000000)
++#define MCF_INTC_IMRH_INT_MASK57    (0x02000000)
++#define MCF_INTC_IMRH_INT_MASK58    (0x04000000)
++#define MCF_INTC_IMRH_INT_MASK59    (0x08000000)
++#define MCF_INTC_IMRH_INT_MASK60    (0x10000000)
++#define MCF_INTC_IMRH_INT_MASK61    (0x20000000)
++#define MCF_INTC_IMRH_INT_MASK62    (0x40000000)
++#define MCF_INTC_IMRH_INT_MASK63    (0x80000000)
++
++/* Bit definitions and macros for IMRL */
++#define MCF_INTC_IMRL_INT_MASK0     (0x00000001)
++#define MCF_INTC_IMRL_INT_MASK1     (0x00000002)
++#define MCF_INTC_IMRL_INT_MASK2     (0x00000004)
++#define MCF_INTC_IMRL_INT_MASK3     (0x00000008)
++#define MCF_INTC_IMRL_INT_MASK4     (0x00000010)
++#define MCF_INTC_IMRL_INT_MASK5     (0x00000020)
++#define MCF_INTC_IMRL_INT_MASK6     (0x00000040)
++#define MCF_INTC_IMRL_INT_MASK7     (0x00000080)
++#define MCF_INTC_IMRL_INT_MASK8     (0x00000100)
++#define MCF_INTC_IMRL_INT_MASK9     (0x00000200)
++#define MCF_INTC_IMRL_INT_MASK10    (0x00000400)
++#define MCF_INTC_IMRL_INT_MASK11    (0x00000800)
++#define MCF_INTC_IMRL_INT_MASK12    (0x00001000)
++#define MCF_INTC_IMRL_INT_MASK13    (0x00002000)
++#define MCF_INTC_IMRL_INT_MASK14    (0x00004000)
++#define MCF_INTC_IMRL_INT_MASK15    (0x00008000)
++#define MCF_INTC_IMRL_INT_MASK16    (0x00010000)
++#define MCF_INTC_IMRL_INT_MASK17    (0x00020000)
++#define MCF_INTC_IMRL_INT_MASK18    (0x00040000)
++#define MCF_INTC_IMRL_INT_MASK19    (0x00080000)
++#define MCF_INTC_IMRL_INT_MASK20    (0x00100000)
++#define MCF_INTC_IMRL_INT_MASK21    (0x00200000)
++#define MCF_INTC_IMRL_INT_MASK22    (0x00400000)
++#define MCF_INTC_IMRL_INT_MASK23    (0x00800000)
++#define MCF_INTC_IMRL_INT_MASK24    (0x01000000)
++#define MCF_INTC_IMRL_INT_MASK25    (0x02000000)
++#define MCF_INTC_IMRL_INT_MASK26    (0x04000000)
++#define MCF_INTC_IMRL_INT_MASK27    (0x08000000)
++#define MCF_INTC_IMRL_INT_MASK28    (0x10000000)
++#define MCF_INTC_IMRL_INT_MASK29    (0x20000000)
++#define MCF_INTC_IMRL_INT_MASK30    (0x40000000)
++#define MCF_INTC_IMRL_INT_MASK31    (0x80000000)
++
++/* Bit definitions and macros for INTFRCH */
++#define MCF_INTC_INTFRCH_INTFRC32   (0x00000001)
++#define MCF_INTC_INTFRCH_INTFRC33   (0x00000002)
++#define MCF_INTC_INTFRCH_INTFRC34   (0x00000004)
++#define MCF_INTC_INTFRCH_INTFRC35   (0x00000008)
++#define MCF_INTC_INTFRCH_INTFRC36   (0x00000010)
++#define MCF_INTC_INTFRCH_INTFRC37   (0x00000020)
++#define MCF_INTC_INTFRCH_INTFRC38   (0x00000040)
++#define MCF_INTC_INTFRCH_INTFRC39   (0x00000080)
++#define MCF_INTC_INTFRCH_INTFRC40   (0x00000100)
++#define MCF_INTC_INTFRCH_INTFRC41   (0x00000200)
++#define MCF_INTC_INTFRCH_INTFRC42   (0x00000400)
++#define MCF_INTC_INTFRCH_INTFRC43   (0x00000800)
++#define MCF_INTC_INTFRCH_INTFRC44   (0x00001000)
++#define MCF_INTC_INTFRCH_INTFRC45   (0x00002000)
++#define MCF_INTC_INTFRCH_INTFRC46   (0x00004000)
++#define MCF_INTC_INTFRCH_INTFRC47   (0x00008000)
++#define MCF_INTC_INTFRCH_INTFRC48   (0x00010000)
++#define MCF_INTC_INTFRCH_INTFRC49   (0x00020000)
++#define MCF_INTC_INTFRCH_INTFRC50   (0x00040000)
++#define MCF_INTC_INTFRCH_INTFRC51   (0x00080000)
++#define MCF_INTC_INTFRCH_INTFRC52   (0x00100000)
++#define MCF_INTC_INTFRCH_INTFRC53   (0x00200000)
++#define MCF_INTC_INTFRCH_INTFRC54   (0x00400000)
++#define MCF_INTC_INTFRCH_INTFRC55   (0x00800000)
++#define MCF_INTC_INTFRCH_INTFRC56   (0x01000000)
++#define MCF_INTC_INTFRCH_INTFRC57   (0x02000000)
++#define MCF_INTC_INTFRCH_INTFRC58   (0x04000000)
++#define MCF_INTC_INTFRCH_INTFRC59   (0x08000000)
++#define MCF_INTC_INTFRCH_INTFRC60   (0x10000000)
++#define MCF_INTC_INTFRCH_INTFRC61   (0x20000000)
++#define MCF_INTC_INTFRCH_INTFRC62   (0x40000000)
++#define MCF_INTC_INTFRCH_INTFRC63   (0x80000000)
++
++/* Bit definitions and macros for INTFRCL */
++#define MCF_INTC_INTFRCL_INTFRC0    (0x00000001)
++#define MCF_INTC_INTFRCL_INTFRC1    (0x00000002)
++#define MCF_INTC_INTFRCL_INTFRC2    (0x00000004)
++#define MCF_INTC_INTFRCL_INTFRC3    (0x00000008)
++#define MCF_INTC_INTFRCL_INTFRC4    (0x00000010)
++#define MCF_INTC_INTFRCL_INTFRC5    (0x00000020)
++#define MCF_INTC_INTFRCL_INTFRC6    (0x00000040)
++#define MCF_INTC_INTFRCL_INTFRC7    (0x00000080)
++#define MCF_INTC_INTFRCL_INTFRC8    (0x00000100)
++#define MCF_INTC_INTFRCL_INTFRC9    (0x00000200)
++#define MCF_INTC_INTFRCL_INTFRC10   (0x00000400)
++#define MCF_INTC_INTFRCL_INTFRC11   (0x00000800)
++#define MCF_INTC_INTFRCL_INTFRC12   (0x00001000)
++#define MCF_INTC_INTFRCL_INTFRC13   (0x00002000)
++#define MCF_INTC_INTFRCL_INTFRC14   (0x00004000)
++#define MCF_INTC_INTFRCL_INTFRC15   (0x00008000)
++#define MCF_INTC_INTFRCL_INTFRC16   (0x00010000)
++#define MCF_INTC_INTFRCL_INTFRC17   (0x00020000)
++#define MCF_INTC_INTFRCL_INTFRC18   (0x00040000)
++#define MCF_INTC_INTFRCL_INTFRC19   (0x00080000)
++#define MCF_INTC_INTFRCL_INTFRC20   (0x00100000)
++#define MCF_INTC_INTFRCL_INTFRC21   (0x00200000)
++#define MCF_INTC_INTFRCL_INTFRC22   (0x00400000)
++#define MCF_INTC_INTFRCL_INTFRC23   (0x00800000)
++#define MCF_INTC_INTFRCL_INTFRC24   (0x01000000)
++#define MCF_INTC_INTFRCL_INTFRC25   (0x02000000)
++#define MCF_INTC_INTFRCL_INTFRC26   (0x04000000)
++#define MCF_INTC_INTFRCL_INTFRC27   (0x08000000)
++#define MCF_INTC_INTFRCL_INTFRC28   (0x10000000)
++#define MCF_INTC_INTFRCL_INTFRC29   (0x20000000)
++#define MCF_INTC_INTFRCL_INTFRC30   (0x40000000)
++#define MCF_INTC_INTFRCL_INTFRC31   (0x80000000)
++
++/* Bit definitions and macros for ICONFIG */
++#define MCF_INTC_ICONFIG_EMASK      (0x0020)
++#define MCF_INTC_ICONFIG_ELVLPRI1   (0x0200)
++#define MCF_INTC_ICONFIG_ELVLPRI2   (0x0400)
++#define MCF_INTC_ICONFIG_ELVLPRI3   (0x0800)
++#define MCF_INTC_ICONFIG_ELVLPRI4   (0x1000)
++#define MCF_INTC_ICONFIG_ELVLPRI5   (0x2000)
++#define MCF_INTC_ICONFIG_ELVLPRI6   (0x4000)
++#define MCF_INTC_ICONFIG_ELVLPRI7   (0x8000)
++
++/* Bit definitions and macros for SIMR */
++#define MCF_INTC_SIMR_SIMR(x)   (((x)&0x7F))
++
++/* Bit definitions and macros for CIMR */
++#define MCF_INTC_CIMR_CIMR(x)   (((x)&0x7F))
++
++/* Bit definitions and macros for CLMASK */
++#define MCF_INTC_CLMASK_CLMASK(x)   (((x)&0x0F))
++
++/* Bit definitions and macros for SLMASK */
++#define MCF_INTC_SLMASK_SLMASK(x)   (((x)&0x0F))
++
++/* Bit definitions and macros for ICR group */
++#define MCF_INTC_ICR_IL(x)      (((x)&0x07))
++
++/* Bit definitions and macros for ICR1 */
++#define MCF_INTC_ICR1_IL(x)     (((x)&0x07))
++
++/* Bit definitions and macros for ICR2 */
++#define MCF_INTC_ICR2_IL(x)     (((x)&0x07))
++
++/* Bit definitions and macros for ICR3 */
++#define MCF_INTC_ICR3_IL(x)     (((x)&0x07))
++
++/* Bit definitions and macros for ICR4 */
++#define MCF_INTC_ICR4_IL(x)     (((x)&0x07))
++
++/* Bit definitions and macros for ICR5 */
++#define MCF_INTC_ICR5_IL(x)     (((x)&0x07))
++
++/* Bit definitions and macros for ICR6 */
++#define MCF_INTC_ICR6_IL(x)     (((x)&0x07))
++
++/* Bit definitions and macros for ICR7 */
++#define MCF_INTC_ICR7_IL(x)     (((x)&0x07))
++
++/* Bit definitions and macros for ICR8 */
++#define MCF_INTC_ICR8_IL(x)     (((x)&0x07))
++
++/* Bit definitions and macros for ICR9 */
++#define MCF_INTC_ICR9_IL(x)     (((x)&0x07))
++
++/* Bit definitions and macros for ICR10 */
++#define MCF_INTC_ICR10_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR11 */
++#define MCF_INTC_ICR11_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR12 */
++#define MCF_INTC_ICR12_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR13 */
++#define MCF_INTC_ICR13_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR14 */
++#define MCF_INTC_ICR14_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR15 */
++#define MCF_INTC_ICR15_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR16 */
++#define MCF_INTC_ICR16_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR17 */
++#define MCF_INTC_ICR17_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR18 */
++#define MCF_INTC_ICR18_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR19 */
++#define MCF_INTC_ICR19_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR20 */
++#define MCF_INTC_ICR20_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR21 */
++#define MCF_INTC_ICR21_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR22 */
++#define MCF_INTC_ICR22_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR23 */
++#define MCF_INTC_ICR23_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR24 */
++#define MCF_INTC_ICR24_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR25 */
++#define MCF_INTC_ICR25_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR26 */
++#define MCF_INTC_ICR26_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR27 */
++#define MCF_INTC_ICR27_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR28 */
++#define MCF_INTC_ICR28_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR29 */
++#define MCF_INTC_ICR29_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR30 */
++#define MCF_INTC_ICR30_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR31 */
++#define MCF_INTC_ICR31_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR32 */
++#define MCF_INTC_ICR32_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR33 */
++#define MCF_INTC_ICR33_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR34 */
++#define MCF_INTC_ICR34_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR35 */
++#define MCF_INTC_ICR35_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR36 */
++#define MCF_INTC_ICR36_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR37 */
++#define MCF_INTC_ICR37_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR38 */
++#define MCF_INTC_ICR38_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR39 */
++#define MCF_INTC_ICR39_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR40 */
++#define MCF_INTC_ICR40_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR41 */
++#define MCF_INTC_ICR41_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR42 */
++#define MCF_INTC_ICR42_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR43 */
++#define MCF_INTC_ICR43_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR44 */
++#define MCF_INTC_ICR44_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR45 */
++#define MCF_INTC_ICR45_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR46 */
++#define MCF_INTC_ICR46_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR47 */
++#define MCF_INTC_ICR47_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR48 */
++#define MCF_INTC_ICR48_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR49 */
++#define MCF_INTC_ICR49_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR50 */
++#define MCF_INTC_ICR50_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR51 */
++#define MCF_INTC_ICR51_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR52 */
++#define MCF_INTC_ICR52_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR53 */
++#define MCF_INTC_ICR53_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR54 */
++#define MCF_INTC_ICR54_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR55 */
++#define MCF_INTC_ICR55_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR56 */
++#define MCF_INTC_ICR56_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR57 */
++#define MCF_INTC_ICR57_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR58 */
++#define MCF_INTC_ICR58_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR59 */
++#define MCF_INTC_ICR59_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR60 */
++#define MCF_INTC_ICR60_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR61 */
++#define MCF_INTC_ICR61_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR62 */
++#define MCF_INTC_ICR62_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for ICR63 */
++#define MCF_INTC_ICR63_IL(x)    (((x)&0x07))
++
++/* Bit definitions and macros for SWIACK */
++#define MCF_INTC_SWIACK_VECTOR(x)   (x)
++
++/* Bit definitions and macros for LIACK group */
++#define MCF_INTC_LIACK_VECTOR(x)    (x)
++
++/* Bit definitions and macros for L1IACK */
++#define MCF_INTC_L1IACK_VECTOR(x)   (x)
++
++/* Bit definitions and macros for L2IACK */
++#define MCF_INTC_L2IACK_VECTOR(x)   (x)
++
++/* Bit definitions and macros for L3IACK */
++#define MCF_INTC_L3IACK_VECTOR(x)   (x)
++
++/* Bit definitions and macros for L4IACK */
++#define MCF_INTC_L4IACK_VECTOR(x)   (x)
++
++/* Bit definitions and macros for L5IACK */
++#define MCF_INTC_L5IACK_VECTOR(x)   (x)
++
++/* Bit definitions and macros for L6IACK */
++#define MCF_INTC_L6IACK_VECTOR(x)   (x)
++
++/* Bit definitions and macros for L7IACK */
++#define MCF_INTC_L7IACK_VECTOR(x)   (x)
++
++/********************************************************************/
++
++#endif /* __MCF5445X_INTC_H__ */
+--- /dev/null
++++ b/include/asm-m68k/mcf5445x_pci.h
+@@ -0,0 +1,238 @@
++/*
++ * Kurt Mahan kmahan@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __MCF5445X_PCI_H__
++#define __MCF5445X_PCI_H__
++
++/*********************************************************************
++*
++* PCI Bus Controller (PCI)
++*
++*********************************************************************/
++
++/* Register read/write macros */
++#define MCF_PCI_PCIIDR          MCF_REG32(0xFC0A8000)
++#define MCF_PCI_PCISCR          MCF_REG32(0xFC0A8004)
++#define MCF_PCI_PCICCRIR        MCF_REG32(0xFC0A8008)
++#define MCF_PCI_PCICR1          MCF_REG32(0xFC0A800C)
++#define MCF_PCI_PCIBAR0         MCF_REG32(0xFC0A8010)
++#define MCF_PCI_PCIBAR1         MCF_REG32(0xFC0A8014)
++#define MCF_PCI_PCIBAR2         MCF_REG32(0xFC0A8018)
++#define MCF_PCI_PCIBAR3         MCF_REG32(0xFC0A801C)
++#define MCF_PCI_PCIBAR4         MCF_REG32(0xFC0A8020)
++#define MCF_PCI_PCIBAR5         MCF_REG32(0xFC0A8024)
++#define MCF_PCI_PCISID          MCF_REG32(0xFC0A802C)
++#define MCF_PCI_PCICR2          MCF_REG32(0xFC0A803C)
++#define MCF_PCI_PCIGSCR         MCF_REG32(0xFC0A8060)
++#define MCF_PCI_PCITBATR0A      MCF_REG32(0xFC0A8064)
++#define MCF_PCI_PCITBATR1A      MCF_REG32(0xFC0A8068)
++#define MCF_PCI_PCITCR          MCF_REG32(0xFC0A806C)
++#define MCF_PCI_PCIIW0BTAR      MCF_REG32(0xFC0A8070)
++#define MCF_PCI_PCIIW1BTAR      MCF_REG32(0xFC0A8074)
++#define MCF_PCI_PCIIW2BTAR      MCF_REG32(0xFC0A8078)
++#define MCF_PCI_PCIIWCR         MCF_REG32(0xFC0A8080)
++#define MCF_PCI_PCIICR          MCF_REG32(0xFC0A8084)
++#define MCF_PCI_PCIISR          MCF_REG32(0xFC0A8088)
++#define MCF_PCI_PCITCR2         MCF_REG32(0xFC0A808C)
++#define MCF_PCI_PCITBATR0       MCF_REG32(0xFC0A8090)
++#define MCF_PCI_PCITBATR1       MCF_REG32(0xFC0A8094)
++#define MCF_PCI_PCITBATR2       MCF_REG32(0xFC0A8098)
++#define MCF_PCI_PCITBATR3       MCF_REG32(0xFC0A809C)
++#define MCF_PCI_PCITBATR4       MCF_REG32(0xFC0A80A0)
++#define MCF_PCI_PCITBATR5       MCF_REG32(0xFC0A80A4)
++#define MCF_PCI_PCICAR          MCF_REG32(0xFC0A80F8)
++
++/* Parameterized register read/write macros for multiple registers */
++#define MCF_PCI_PCIIWBTAR(x)    MCF_REG32(0xFC0A8070+((x)*0x004))
++
++/* Bit definitions and macros for PCIIDR */
++#define MCF_PCI_PCIIDR_VENDORID(x)      (((x)&0x0000FFFF))
++#define MCF_PCI_PCIIDR_DEVICEID(x)      (((x)&0x0000FFFF)<<16)
++
++/* Bit definitions and macros for PCISCR */
++#define MCF_PCI_PCISCR_M        (0x00000002)
++#define MCF_PCI_PCISCR_B        (0x00000004)
++#define MCF_PCI_PCISCR_SP       (0x00000008)
++#define MCF_PCI_PCISCR_MW       (0x00000010)
++#define MCF_PCI_PCISCR_PER      (0x00000040)
++#define MCF_PCI_PCISCR_S        (0x00000100)
++#define MCF_PCI_PCISCR_F        (0x00000200)
++#define MCF_PCI_PCISCR_C        (0x00100000)
++#define MCF_PCI_PCISCR_66M      (0x00200000)
++#define MCF_PCI_PCISCR_R        (0x00400000)
++#define MCF_PCI_PCISCR_FC       (0x00800000)
++#define MCF_PCI_PCISCR_DP       (0x01000000)
++#define MCF_PCI_PCISCR_DT(x)    (((x)&0x00000003)<<25)
++#define MCF_PCI_PCISCR_TS       (0x08000000)
++#define MCF_PCI_PCISCR_TR       (0x10000000)
++#define MCF_PCI_PCISCR_MA       (0x20000000)
++#define MCF_PCI_PCISCR_SE       (0x40000000)
++#define MCF_PCI_PCISCR_PE       (0x80000000)
++
++/* Bit definitions and macros for PCICCRIR */
++#define MCF_PCI_PCICCRIR_REVID(x)       (((x)&0x000000FF))
++#define MCF_PCI_PCICCRIR_CLASSCODE(x)   (((x)&0x00FFFFFF)<<8)
++
++/* Bit definitions and macros for PCICR1 */
++#define MCF_PCI_PCICR1_CACHELINESIZE(x)     (((x)&0x0000000F))
++#define MCF_PCI_PCICR1_LATTIMER(x)          (((x)&0x000000FF)<<8)
++#define MCF_PCI_PCICR1_HEADERTYPE(x)        (((x)&0x000000FF)<<16)
++#define MCF_PCI_PCICR1_BIST(x)              (((x)&0x000000FF)<<24)
++
++/* Bit definitions and macros for PCIBAR0 */
++#define MCF_PCI_PCIBAR0_IO          (0x00000001)
++#define MCF_PCI_PCIBAR0_RANGE(x)    (((x)&0x00000003)<<1)
++#define MCF_PCI_PCIBAR0_PREF        (0x00000008)
++#define MCF_PCI_PCIBAR0_BAR0(x)     (((x)&0x00003FFF)<<18)
++
++/* Bit definitions and macros for PCIBAR1 */
++#define MCF_PCI_PCIBAR1_IO          (0x00000001)
++#define MCF_PCI_PCIBAR1_PREF        (0x00000008)
++#define MCF_PCI_PCIBAR1_BAR1(x)     (((x)&0x00000FFF)<<20)
++
++/* Bit definitions and macros for PCIBAR2 */
++#define MCF_PCI_PCIBAR2_IO          (0x00000001)
++#define MCF_PCI_PCIBAR2_RANGE(x)    (((x)&0x00000003)<<1)
++#define MCF_PCI_PCIBAR2_PREF        (0x00000008)
++#define MCF_PCI_PCIBAR2_BAR2(x)     (((x)&0x000003FF)<<22)
++
++/* Bit definitions and macros for PCIBAR3 */
++#define MCF_PCI_PCIBAR3_IO          (0x00000001)
++#define MCF_PCI_PCIBAR3_PREF        (0x00000008)
++#define MCF_PCI_PCIBAR3_BAR3(x)     (((x)&0x000000FF)<<24)
++
++/* Bit definitions and macros for PCIBAR4 */
++#define MCF_PCI_PCIBAR4_IO          (0x00000001)
++#define MCF_PCI_PCIBAR4_RANGE(x)    (((x)&0x00000003)<<1)
++#define MCF_PCI_PCIBAR4_PREF        (0x00000008)
++#define MCF_PCI_PCIBAR4_BAR4(x)     (((x)&0x0000001F)<<27)
++
++/* Bit definitions and macros for PCIBAR5 */
++#define MCF_PCI_PCIBAR5_IO          (0x00000001)
++#define MCF_PCI_PCIBAR5_PREF        (0x00000008)
++#define MCF_PCI_PCIBAR5_BAR5(x)     (((x)&0x0000000F)<<28)
++
++/* Bit definitions and macros for PCISID */
++#define MCF_PCI_PCISID_VENDORID(x)      (((x)&0x0000FFFF))
++#define MCF_PCI_PCISID_ID(x)            (((x)&0x0000FFFF)<<16)
++
++/* Bit definitions and macros for PCICR2 */
++#define MCF_PCI_PCICR2_INTLINE(x)   (((x)&0x000000FF))
++#define MCF_PCI_PCICR2_INTPIN(x)    (((x)&0x000000FF)<<8)
++#define MCF_PCI_PCICR2_MINGNT(x)    (((x)&0x000000FF)<<16)
++#define MCF_PCI_PCICR2_MAXLAT(x)    (((x)&0x000000FF)<<24)
++
++/* Bit definitions and macros for PCIGSCR */
++#define MCF_PCI_PCIGSCR_PR      (0x00000001)
++#define MCF_PCI_PCIGSCR_SEE     (0x00001000)
++#define MCF_PCI_PCIGSCR_PEE     (0x00002000)
++#define MCF_PCI_PCIGSCR_SE      (0x10000000)
++#define MCF_PCI_PCIGSCR_PE      (0x20000000)
++
++/* Bit definitions and macros for PCITBATR0A */
++#define MCF_PCI_PCITBATR0A_EN           (0x00000001)
++#define MCF_PCI_PCITBATR0A_BAT0(x)      (((x)&0x00003FFF)<<18)
++
++/* Bit definitions and macros for PCITBATR1A */
++#define MCF_PCI_PCITBATR1A_EN           (0x00000001)
++#define MCF_PCI_PCITBATR1A_BAT1(x)      (((x)&0x00000FFF)<<20)
++
++/* Bit definitions and macros for PCITCR */
++#define MCF_PCI_PCITCR_WCT(x)   (((x)&0x000000FF))
++#define MCF_PCI_PCITCR_WCD      (0x00000100)
++#define MCF_PCI_PCITCR_P        (0x00010000)
++#define MCF_PCI_PCITCR_PID      (0x00020000)
++#define MCF_PCI_PCITCR_LD       (0x01000000)
++
++/* Bit definitions and macros for PCIIWBTAR group */
++#define MCF_PCI_PCIIWBTAR_WBA(x)    ((((x)&0xFF000000)))
++#define MCF_PCI_PCIIWBTAR_WAM(x)    ((((x)&0xFF000000)
++#define MCF_PCI_PCIIWBTAR_WTA(x)    ((((x)&0xFF000000)
++
++/* Bit definitions and macros for PCIIW0BTAR */
++#define MCF_PCI_PCIIW0BTAR_WBA(x)   ((((x)&0xFF000000)))
++#define MCF_PCI_PCIIW0BTAR_WAM(x)   ((((x)&0xFF000000)
++#define MCF_PCI_PCIIW0BTAR_WTA(x)   ((((x)&0xFF000000)
++
++/* Bit definitions and macros for PCIIWCR */
++#define MCF_PCI_PCIIWCR_WINCTRL2(x)             (((x)&0x0000000F)<<8)
++#define MCF_PCI_PCIIWCR_WINCTRL1(x)             (((x)&0x0000000F)<<16)
++#define MCF_PCI_PCIIWCR_WINCTRL0(x)             (((x)&0x0000000F)<<24)
++#define MCF_PCI_PCIIWCR_WINCTRL0_ENABLE         (0x01000000)
++#define MCF_PCI_PCIIWCR_WINCTRL0_MEMREAD        (0x01000000)
++#define MCF_PCI_PCIIWCR_WINCTRL0_MEMRDLINE      (0x03000000)
++#define MCF_PCI_PCIIWCR_WINCTRL0_MEMRDMUL       (0x05000000)
++#define MCF_PCI_PCIIWCR_WINCTRL0_IO             (0x09000000)
++#define MCF_PCI_PCIIWCR_WINCTRL1_MEMREAD        (0x00010000)
++#define MCF_PCI_PCIIWCR_WINCTRL1_ENABLE         (0x00010000)
++#define MCF_PCI_PCIIWCR_WINCTRL1_MEMRDLINE      (0x00030000)
++#define MCF_PCI_PCIIWCR_WINCTRL1_MEMRDMUL       (0x00050000)
++#define MCF_PCI_PCIIWCR_WINCTRL1_IO             (0x00090000)
++#define MCF_PCI_PCIIWCR_WINCTRL2_ENABLE         (0x00000100)
++#define MCF_PCI_PCIIWCR_WINCTRL2_MEMREAD        (0x00000100)
++#define MCF_PCI_PCIIWCR_WINCTRL2_MEMRDLINE      (0x00000300)
++#define MCF_PCI_PCIIWCR_WINCTRL2_MEMRDMUL       (0x00000500)
++#define MCF_PCI_PCIIWCR_WINCTRL2_IO             (0x00000900)
++
++/* Bit definitions and macros for PCIICR */
++#define MCF_PCI_PCIICR_MAXRETRY(x)      (((x)&0x000000FF))
++#define MCF_PCI_PCIICR_TAE              (0x01000000)
++#define MCF_PCI_PCIICR_IAE              (0x02000000)
++#define MCF_PCI_PCIICR_REE              (0x04000000)
++
++/* Bit definitions and macros for PCIISR */
++#define MCF_PCI_PCIISR_TA       (0x01000000)
++#define MCF_PCI_PCIISR_IA       (0x02000000)
++#define MCF_PCI_PCIISR_RE       (0x04000000)
++
++/* Bit definitions and macros for PCITCR2 */
++#define MCF_PCI_PCITCR2_CR      (0x00000001)
++#define MCF_PCI_PCITCR2_B0E     (0x00000100)
++#define MCF_PCI_PCITCR2_B1E     (0x00000200)
++#define MCF_PCI_PCITCR2_B2E     (0x00000400)
++#define MCF_PCI_PCITCR2_B3E     (0x00000800)
++#define MCF_PCI_PCITCR2_B4E     (0x00001000)
++#define MCF_PCI_PCITCR2_B5E     (0x00002000)
++
++/* Bit definitions and macros for PCITBATR0 */
++#define MCF_PCI_PCITBATR0_EN        (0x00000001)
++#define MCF_PCI_PCITBATR0_BAT0(x)   (((x)&0x00003FFF)<<18)
++
++/* Bit definitions and macros for PCITBATR1 */
++#define MCF_PCI_PCITBATR1_EN        (0x00000001)
++#define MCF_PCI_PCITBATR1_BAT1(x)   (((x)&0x00000FFF)<<20)
++
++/* Bit definitions and macros for PCITBATR2 */
++#define MCF_PCI_PCITBATR2_EN        (0x00000001)
++#define MCF_PCI_PCITBATR2_BAT2(x)   (((x)&0x000003FF)<<22)
++
++/* Bit definitions and macros for PCITBATR3 */
++#define MCF_PCI_PCITBATR3_EN        (0x00000001)
++#define MCF_PCI_PCITBATR3_BAT3(x)   (((x)&0x000000FF)<<24)
++
++/* Bit definitions and macros for PCITBATR4 */
++#define MCF_PCI_PCITBATR4_EN        (0x00000001)
++#define MCF_PCI_PCITBATR4_BAT4(x)   (((x)&0x0000001F)<<27)
++
++/* Bit definitions and macros for PCITBATR5 */
++#define MCF_PCI_PCITBATR5_EN        (0x00000001)
++#define MCF_PCI_PCITBATR5_BAT5(x)   (((x)&0x0000000F)<<28)
++
++/* Bit definitions and macros for PCICAR */
++#define MCF_PCI_PCICAR_DWORD(x)     ((x)&0x000000FC)
++#define MCF_PCI_PCICAR_FUNCNUM(x)   (((x)&0x00000007)<<8)
++#define MCF_PCI_PCICAR_DEVNUM(x)    (((x)&0x0000001F)<<11)
++#define MCF_PCI_PCICAR_BUSNUM(x)    (((x)&0x000000FF)<<16)
++#define MCF_PCI_PCICAR_E            (0x80000000)
++
++/********************************************************************/
++
++#endif /* __MCF5445X_PCI_H__ */
+--- /dev/null
++++ b/include/asm-m68k/mcf5445x_pciarb.h
+@@ -0,0 +1,40 @@
++/*
++ * Kurt Mahan kmahan@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __MCF5445X_PCIARB_H__
++#define __MCF5445X_PCIARB_H__
++
++/*********************************************************************
++*
++* PCI Arbiter Module (PCIARB)
++*
++*********************************************************************/
++
++/* Register read/write macros */
++#define MCF_PCIARB_PACR         	MCF_REG32(0xFC0AC000)
++#define MCF_PCIARB_PASR         	MCF_REG32(0xFC0AC004)
++
++/* Bit definitions and macros for PACR */
++#define MCF_PCIARB_PACR_INTMPRI         (0x00000001)
++#define MCF_PCIARB_PACR_EXTMPRI(x)      (((x)&0x0000001F)<<1)
++#define MCF_PCIARB_PACR_RA              (0x00008000)
++#define MCF_PCIARB_PACR_INTMINTEN       (0x00010000)
++#define MCF_PCIARB_PACR_EXTMINTEN(x)    (((x)&0x0000001F)<<17)
++#define MCF_PCIARB_PACR_PKMD            (0x40000000)
++#define MCF_PCIARB_PACR_DS              (0x80000000)
++
++/* Bit definitions and macros for PASR */
++#define MCF_PCIARB_PASR_ITLMBK      	(0x00010000)
++#define MCF_PCIARB_PASR_EXTMBK(x)   	(((x)&0x0000001F)<<17)
++
++/********************************************************************/
++
++#endif /* __MCF5445X_PCIARB_H__ */
+--- /dev/null
++++ b/include/asm-m68k/mcf5445x_sdramc.h
+@@ -0,0 +1,115 @@
++/*
++ * Matt Waddel Matt.Waddel@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __MCF5445X_SDRAMC_H__
++#define __MCF5445X_SDRAMC_H__
++
++/*********************************************************************
++*
++* SDRAM Controller (SDRAMC)
++*
++*********************************************************************/
++
++/* Register read/write macros */
++#define MCF_SDRAMC_SDMR         (*(vuint32 *)(0xFC0B8000))   /* SDRAM Mode/Extended Mode Register */
++#define MCF_SDRAMC_SDCR         (*(vuint32 *)(0xFC0B8004))   /* SDRAM Control Register */
++#define MCF_SDRAMC_SDCFG1       (*(vuint32 *)(0xFC0B8008))   /* SDRAM Configuration Register 1 */
++#define MCF_SDRAMC_SDCFG2       (*(vuint32 *)(0xFC0B800C))   /* SDRAM Configuration Register 2 */
++#define MCF_SDRAMC_SDCS0        (*(vuint32 *)(0xFC0B8110))   /* SDRAM Chip Select Register */
++#define MCF_SDRAMC_SDCS1        (*(vuint32 *)(0xFC0B8114))   /* SDRAM Chip Select Register */
++
++/* Parameterized register read/write macros for multiple registers */
++#define MCF_SDRAMC_SDCS(x)      (*(vuint32 *)(0xFC0B8110+((x)*0x004)))   /* SDRAM Chip Select Register */
++
++/* Bit definitions and macros for SDMR */
++#define MCF_SDRAMC_SDMR_DDR2_AD(x)      (((x)&0x00003FFF))      /* Address for DDR2 */
++#define MCF_SDRAMC_SDMR_CMD             (0x00010000)            /* Command */
++#define MCF_SDRAMC_SDMR_AD(x)           (((x)&0x00000FFF)<<18)  /* Address */
++#define MCF_SDRAMC_SDMR_BK(x)           (((x)&0x00000003)<<30)  /* Bank Address */
++#define MCF_SDRAMC_SDMR_BK_LMR          (0x00000000)
++#define MCF_SDRAMC_SDMR_BK_LEMR         (0x40000000)
++
++/* Bit definitions and macros for SDCR */
++#define MCF_SDRAMC_SDCR_DPD             (0x00000001)            /* Deep Power-Down Mode */
++#define MCF_SDRAMC_SDCR_IPALL           (0x00000002)            /* Initiate Precharge All */
++#define MCF_SDRAMC_SDCR_IREF            (0x00000004)            /* Initiate Refresh */
++#define MCF_SDRAMC_SDCR_DQS_OE(x)       (((x)&0x00000003)<<10)  /* DQS Output Enable */
++#define MCF_SDRAMC_SDCR_MEM_PS          (0x00002000)            /* Data Port Size */
++#define MCF_SDRAMC_SDCR_REF_CNT(x)      (((x)&0x0000003F)<<16)  /* Periodic Refresh Counter */
++#define MCF_SDRAMC_SDCR_OE_RULE         (0x00400000)            /* Drive Rule Selection */
++#define MCF_SDRAMC_SDCR_ADDR_MUX(x)     (((x)&0x00000003)<<24)  /* Internal Address Mux Select */
++#define MCF_SDRAMC_SDCR_DDR2_MODE       (0x08000000)            /* DDR2 Mode Select */
++#define MCF_SDRAMC_SDCR_REF_EN          (0x10000000)            /* Refresh Enable */
++#define MCF_SDRAMC_SDCR_DDR_MODE        (0x20000000)            /* DDR Mode Select */
++#define MCF_SDRAMC_SDCR_CKE             (0x40000000)            /* Clock Enable */
++#define MCF_SDRAMC_SDCR_MODE_EN         (0x80000000)            /* SDRAM Mode Register Programming Enable */
++#define MCF_SDRAMC_SDCR_DQS_OE_BOTH     (0x00000C00)
++
++/* Bit definitions and macros for SDCFG1 */
++#define MCF_SDRAMC_SDCFG1_WT_LAT(x)     (((x)&0x00000007)<<4)   /* Write Latency */
++#define MCF_SDRAMC_SDCFG1_REF2ACT(x)    (((x)&0x0000000F)<<8)   /* Refresh to active delay */
++#define MCF_SDRAMC_SDCFG1_PRE2ACT(x)    (((x)&0x00000007)<<12)  /* Precharge to active delay */
++#define MCF_SDRAMC_SDCFG1_ACT2RW(x)     (((x)&0x00000007)<<16)  /* Active to read/write delay */
++#define MCF_SDRAMC_SDCFG1_RD_LAT(x)     (((x)&0x0000000F)<<20)  /* Read CAS Latency */
++#define MCF_SDRAMC_SDCFG1_SWT2RWP(x)    (((x)&0x00000007)<<24)  /* Single write to read/write/precharge delay */
++#define MCF_SDRAMC_SDCFG1_SRD2RWP(x)    (((x)&0x0000000F)<<28)  /* Single read to read/write/precharge delay */
++
++/* Bit definitions and macros for SDCFG2 */
++#define MCF_SDRAMC_SDCFG2_BL(x)         (((x)&0x0000000F)<<16)  /* Burst Length */
++#define MCF_SDRAMC_SDCFG2_BRD2W(x)      (((x)&0x0000000F)<<20)  /* Burst read to write delay */
++#define MCF_SDRAMC_SDCFG2_BWT2RWP(x)    (((x)&0x0000000F)<<24)  /* Burst write to read/write/precharge delay */
++#define MCF_SDRAMC_SDCFG2_BRD2RP(x)     (((x)&0x0000000F)<<28)  /* Burst read to read/precharge delay */
++
++/* Bit definitions and macros for SDCS group */
++#define MCF_SDRAMC_SDCS_CSSZ(x)         (((x)&0x0000001F))      /* Chip-Select Size */
++#define MCF_SDRAMC_SDCS_CSBA(x)         (((x)&0x00000FFF)<<20)  /* Chip-Select Base Address */
++#define MCF_SDRAMC_SDCS_BA(x)           ((x)&0xFFF00000)
++#define MCF_SDRAMC_SDCS_CSSZ_DISABLE    (0x00000000)
++#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE     (0x00000013)
++#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE     (0x00000014)
++#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE     (0x00000015)
++#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE     (0x00000016)
++#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE    (0x00000017)
++#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE    (0x00000018)
++#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE    (0x00000019)
++#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE   (0x0000001A)
++#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE   (0x0000001B)
++#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE   (0x0000001C)
++#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE     (0x0000001D)
++#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE     (0x0000001E)
++#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE     (0x0000001F)
++
++/* Bit definitions and macros for SDCS0 */
++#define MCF_SDRAMC_SDCS0_CSSZ(x)            (((x)&0x0000001F))      /* Chip-Select Size */
++#define MCF_SDRAMC_SDCS0_CSBA(x)            (((x)&0x00000FFF)<<20)  /* Chip-Select Base Address */
++#define MCF_SDRAMC_SDCS0_BA(x)              ((x)&0xFFF00000)
++#define MCF_SDRAMC_SDCS0_CSSZ_DISABLE       (0x00000000)
++#define MCF_SDRAMC_SDCS0_CSSZ_1MBYTE        (0x00000013)
++#define MCF_SDRAMC_SDCS0_CSSZ_2MBYTE        (0x00000014)
++#define MCF_SDRAMC_SDCS0_CSSZ_4MBYTE        (0x00000015)
++#define MCF_SDRAMC_SDCS0_CSSZ_8MBYTE        (0x00000016)
++#define MCF_SDRAMC_SDCS0_CSSZ_16MBYTE       (0x00000017)
++#define MCF_SDRAMC_SDCS0_CSSZ_32MBYTE       (0x00000018)
++#define MCF_SDRAMC_SDCS0_CSSZ_64MBYTE       (0x00000019)
++#define MCF_SDRAMC_SDCS0_CSSZ_128MBYTE      (0x0000001A)
++#define MCF_SDRAMC_SDCS0_CSSZ_256MBYTE      (0x0000001B)
++#define MCF_SDRAMC_SDCS0_CSSZ_512MBYTE      (0x0000001C)
++#define MCF_SDRAMC_SDCS0_CSSZ_1GBYTE        (0x0000001D)
++#define MCF_SDRAMC_SDCS0_CSSZ_2GBYTE        (0x0000001E)
++#define MCF_SDRAMC_SDCS0_CSSZ_4GBYTE        (0x0000001F)
++
++/* Bit definitions and macros for SDCS1 */
++#define MCF_SDRAMC_SDCS1_CSSZ(x)    (((x)&0x0000001F))      /* Chip-Select Size */
++#define MCF_SDRAMC_SDCS1_CSBA(x)    (((x)&0x00000FFF)<<20)  /* Chip-Select Base Address */
++
++/********************************************************************/
++
++#endif /* __MCF5445X_SDRAMC_H__ */
+--- /dev/null
++++ b/include/asm-m68k/mcf5445x_ssi.h
+@@ -0,0 +1,187 @@
++/*
++ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __MCF5445X_SSI_H__
++#define __MCF5445X_SSI_H__
++
++/*********************************************************************
++*
++* Synchronous Serial Interface (SSI)
++*
++*********************************************************************/
++
++/* Register read/write macros */
++#define MCF_SSI_TX0             MCF_REG32(0xFC0BC000)
++#define MCF_SSI_TX1             MCF_REG32(0xFC0BC004)
++#define MCF_SSI_RX0             MCF_REG32(0xFC0BC008)
++#define MCF_SSI_RX1             MCF_REG32(0xFC0BC00C)
++#define MCF_SSI_CR              MCF_REG32(0xFC0BC010)
++#define MCF_SSI_ISR             MCF_REG32(0xFC0BC014)
++#define MCF_SSI_IER             MCF_REG32(0xFC0BC018)
++#define MCF_SSI_TCR             MCF_REG32(0xFC0BC01C)
++#define MCF_SSI_RCR             MCF_REG32(0xFC0BC020)
++#define MCF_SSI_CCR             MCF_REG32(0xFC0BC024)
++#define MCF_SSI_FCSR            MCF_REG32(0xFC0BC02C)
++#define MCF_SSI_ACR             MCF_REG32(0xFC0BC038)
++#define MCF_SSI_ACADD           MCF_REG32(0xFC0BC03C)
++#define MCF_SSI_ACDAT           MCF_REG32(0xFC0BC040)
++#define MCF_SSI_ATAG            MCF_REG32(0xFC0BC044)
++#define MCF_SSI_TMASK           MCF_REG32(0xFC0BC048)
++#define MCF_SSI_RMASK           MCF_REG32(0xFC0BC04C)
++
++/* Parameterized register read/write macros for multiple registers */
++#define MCF_SSI_TX(x)           MCF_REG32(0xFC0BC000+((x)*0x004))
++#define MCF_SSI_RX(x)           MCF_REG32(0xFC0BC008+((x)*0x004))
++
++/* Bit definitions and macros for TX group */
++#define MCF_SSI_TX_SSI_TX(x)    (x)
++
++/* Bit definitions and macros for TX0 */
++#define MCF_SSI_TX0_SSI_TX(x)   (x)
++
++/* Bit definitions and macros for TX1 */
++#define MCF_SSI_TX1_SSI_TX(x)   (x)
++
++/* Bit definitions and macros for RX group */
++#define MCF_SSI_RX_SSI_RX(x)    (x)
++
++/* Bit definitions and macros for RX0 */
++#define MCF_SSI_RX0_SSI_RX(x)   (x)
++
++/* Bit definitions and macros for RX1 */
++#define MCF_SSI_RX1_SSI_RX(x)   (x)
++
++/* Bit definitions and macros for CR */
++#define MCF_SSI_CR_SSI_EN       (0x00000001)
++#define MCF_SSI_CR_TE           (0x00000002)
++#define MCF_SSI_CR_RE           (0x00000004)
++#define MCF_SSI_CR_NET          (0x00000008)
++#define MCF_SSI_CR_SYN          (0x00000010)
++#define MCF_SSI_CR_I2S(x)       (((x)&0x00000003)<<5)
++#define MCF_SSI_CR_MCE          (0x00000080)
++#define MCF_SSI_CR_TCH          (0x00000100)
++#define MCF_SSI_CR_CIS          (0x00000200)
++#define MCF_SSI_CR_I2S_NORMAL   (0x00000000)
++#define MCF_SSI_CR_I2S_MASTER   (0x00000020)
++#define MCF_SSI_CR_I2S_SLAVE    (0x00000040)
++
++/* Bit definitions and macros for ISR */
++#define MCF_SSI_ISR_TFE0        (0x00000001)
++#define MCF_SSI_ISR_TFE1        (0x00000002)
++#define MCF_SSI_ISR_RFF0        (0x00000004)
++#define MCF_SSI_ISR_RFF1        (0x00000008)
++#define MCF_SSI_ISR_RLS         (0x00000010)
++#define MCF_SSI_ISR_TLS         (0x00000020)
++#define MCF_SSI_ISR_RFS         (0x00000040)
++#define MCF_SSI_ISR_TFS         (0x00000080)
++#define MCF_SSI_ISR_TUE0        (0x00000100)
++#define MCF_SSI_ISR_TUE1        (0x00000200)
++#define MCF_SSI_ISR_ROE0        (0x00000400)
++#define MCF_SSI_ISR_ROE1        (0x00000800)
++#define MCF_SSI_ISR_TDE0        (0x00001000)
++#define MCF_SSI_ISR_TDE1        (0x00002000)
++#define MCF_SSI_ISR_RDR0        (0x00004000)
++#define MCF_SSI_ISR_RDR1        (0x00008000)
++#define MCF_SSI_ISR_RXT         (0x00010000)
++#define MCF_SSI_ISR_CMDDU       (0x00020000)
++#define MCF_SSI_ISR_CMDAU       (0x00040000)
++
++/* Bit definitions and macros for IER */
++#define MCF_SSI_IER_TFE0        (0x00000001)
++#define MCF_SSI_IER_TFE1        (0x00000002)
++#define MCF_SSI_IER_RFF0        (0x00000004)
++#define MCF_SSI_IER_RFF1        (0x00000008)
++#define MCF_SSI_IER_RLS         (0x00000010)
++#define MCF_SSI_IER_TLS         (0x00000020)
++#define MCF_SSI_IER_RFS         (0x00000040)
++#define MCF_SSI_IER_TFS         (0x00000080)
++#define MCF_SSI_IER_TUE0        (0x00000100)
++#define MCF_SSI_IER_TUE1        (0x00000200)
++#define MCF_SSI_IER_ROE0        (0x00000400)
++#define MCF_SSI_IER_ROE1        (0x00000800)
++#define MCF_SSI_IER_TDE0        (0x00001000)
++#define MCF_SSI_IER_TDE1        (0x00002000)
++#define MCF_SSI_IER_RDR0        (0x00004000)
++#define MCF_SSI_IER_RDR1        (0x00008000)
++#define MCF_SSI_IER_RXT         (0x00010000)
++#define MCF_SSI_IER_CMDU        (0x00020000)
++#define MCF_SSI_IER_CMDAU       (0x00040000)
++#define MCF_SSI_IER_TIE         (0x00080000)
++#define MCF_SSI_IER_TDMAE       (0x00100000)
++#define MCF_SSI_IER_RIE         (0x00200000)
++#define MCF_SSI_IER_RDMAE       (0x00400000)
++
++/* Bit definitions and macros for TCR */
++#define MCF_SSI_TCR_TEFS        (0x00000001)
++#define MCF_SSI_TCR_TFSL        (0x00000002)
++#define MCF_SSI_TCR_TFSI        (0x00000004)
++#define MCF_SSI_TCR_TSCKP       (0x00000008)
++#define MCF_SSI_TCR_TSHFD       (0x00000010)
++#define MCF_SSI_TCR_TXDIR       (0x00000020)
++#define MCF_SSI_TCR_TFDIR       (0x00000040)
++#define MCF_SSI_TCR_TFEN0       (0x00000080)
++#define MCF_SSI_TCR_TFEN1       (0x00000100)
++#define MCF_SSI_TCR_TXBIT0      (0x00000200)
++
++/* Bit definitions and macros for RCR */
++#define MCF_SSI_RCR_REFS        (0x00000001)
++#define MCF_SSI_RCR_RFSL        (0x00000002)
++#define MCF_SSI_RCR_RFSI        (0x00000004)
++#define MCF_SSI_RCR_RSCKP       (0x00000008)
++#define MCF_SSI_RCR_RSHFD       (0x00000010)
++#define MCF_SSI_RCR_RFEN0       (0x00000080)
++#define MCF_SSI_RCR_RFEN1       (0x00000100)
++#define MCF_SSI_RCR_RXBIT0      (0x00000200)
++#define MCF_SSI_RCR_RXEXT       (0x00000400)
++
++/* Bit definitions and macros for CCR */
++#define MCF_SSI_CCR_PM(x)       (((x)&0x000000FF))
++#define MCF_SSI_CCR_DC(x)       (((x)&0x0000001F)<<8)
++#define MCF_SSI_CCR_WL(x)       (((x)&0x0000000F)<<13)
++#define MCF_SSI_CCR_PSR         (0x00020000)
++#define MCF_SSI_CCR_DIV2        (0x00040000)
++
++/* Bit definitions and macros for FCSR */
++#define MCF_SSI_FCSR_TFWM0(x)       (((x)&0x0000000F))
++#define MCF_SSI_FCSR_RFWM0(x)       (((x)&0x0000000F)<<4)
++#define MCF_SSI_FCSR_TFCNT0(x)      (((x)&0x0000000F)<<8)
++#define MCF_SSI_FCSR_RFCNT0(x)      (((x)&0x0000000F)<<12)
++#define MCF_SSI_FCSR_TFWM1(x)       (((x)&0x0000000F)<<16)
++#define MCF_SSI_FCSR_RFWM1(x)       (((x)&0x0000000F)<<20)
++#define MCF_SSI_FCSR_TFCNT1(x)      (((x)&0x0000000F)<<24)
++#define MCF_SSI_FCSR_RFCNT1(x)      (((x)&0x0000000F)<<28)
++
++/* Bit definitions and macros for ACR */
++#define MCF_SSI_ACR_AC97EN      (0x00000001)
++#define MCF_SSI_ACR_FV          (0x00000002)
++#define MCF_SSI_ACR_TIF         (0x00000004)
++#define MCF_SSI_ACR_RD          (0x00000008)
++#define MCF_SSI_ACR_WR          (0x00000010)
++#define MCF_SSI_ACR_FRDIV(x)    (((x)&0x0000003F)<<5)
++
++/* Bit definitions and macros for ACADD */
++#define MCF_SSI_ACADD_SSI_ACADD(x)      (((x)&0x0007FFFF))
++
++/* Bit definitions and macros for ACDAT */
++#define MCF_SSI_ACDAT_SSI_ACDAT(x)      (((x)&0x0007FFFF))
++
++/* Bit definitions and macros for ATAG */
++#define MCF_SSI_ATAG_DDI_ATAG(x)    (((x)&0x0000FFFF))
++
++/* Bit definitions and macros for TMASK */
++#define MCF_SSI_TMASK_SSI_TMASK(x)      (x)
++
++/* Bit definitions and macros for RMASK */
++#define MCF_SSI_RMASK_SSI_RMASK(x)      (x)
++
++/********************************************************************/
++
++#endif /* __MCF5445X_SSI_H__ */
+--- /dev/null
++++ b/include/asm-m68k/mcf5445x_usb.h
+@@ -0,0 +1,49 @@
++/*
++ * Duck Schmid duck@freescale.com
++ *
++ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++#include <asm/mcfsim.h>
++
++/* ehci_arc_hc_driver.flags value */
++#define FSL_PLATFORM_HC_FLAGS (HCD_USB2 | HCD_MEMORY)
++
++static inline int fsl_platform_verify(struct platform_device *pdev)
++{
++	return 0;
++}
++
++static inline void fsl_platform_usb_setup(struct usb_hcd *hcd)
++{
++}
++
++static inline void fsl_platform_set_host_mode(struct usb_hcd *hcd)
++{
++	unsigned int temp;
++	struct fsl_usb2_platform_data *pdata;
++	struct fsl_usb_host_regs *regs;
++
++	pdata = hcd->self.controller->platform_data;
++	regs = pdata->regs;
++
++	if (pdata->xcvr_ops && pdata->xcvr_ops->set_host)
++		pdata->xcvr_ops->set_host();
++
++	/* set host mode and select "big endian" */
++	temp = fsl_readl(&regs->usbmode);
++	fsl_writel(temp | USBMODE_CM_HOST | USBMODE_ES, &regs->usbmode);
++
++	pr_debug("%s: set usbmode to 0x%x\n\n", __FUNCTION__,
++		fsl_readl(&regs->usbmode));
++
++}
diff --git a/target/linux/coldfire/patches/005-mcfv4e_kernel_mods.patch b/target/linux/coldfire/patches/005-mcfv4e_kernel_mods.patch
new file mode 100644
index 0000000000..05ffbd6480
--- /dev/null
+++ b/target/linux/coldfire/patches/005-mcfv4e_kernel_mods.patch
@@ -0,0 +1,571 @@
+From 823ad3e6e88353226ec28f48183a467181887a1b Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 31 Oct 2007 16:56:09 -0600
+Subject: [PATCH] Core Coldfire/MCF54455 kernel changes.
+
+LTIBName: mcfv4e-kernel-mods
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/Kconfig              |   65 ++++++++++++++++++++++++++++++++++++++-
+ arch/m68k/Kconfig.debug        |    9 +++++
+ arch/m68k/Makefile             |   14 ++++++++
+ arch/m68k/kernel/Makefile      |   15 ++++++---
+ arch/m68k/kernel/asm-offsets.c |    7 ++++
+ arch/m68k/kernel/dma.c         |   17 ++++++++++
+ arch/m68k/kernel/process.c     |   57 +++++++++++++++++++++++++++++++++++
+ arch/m68k/kernel/setup.c       |   49 ++++++++++++++++++++++++++----
+ arch/m68k/kernel/time.c        |    5 +++
+ arch/m68k/kernel/vmlinux.lds.S |    2 +
+ 10 files changed, 227 insertions(+), 13 deletions(-)
+
+--- a/arch/m68k/Kconfig
++++ b/arch/m68k/Kconfig
+@@ -119,6 +119,20 @@ config SUN3
+ 
+ 	  If you don't want to compile a kernel exclusively for a Sun 3, say N.
+ 
++config COLDFIRE
++	bool "ColdFire V4e support"
++	default y
++	select CFV4E
++	help
++	  Say Y if you want to build a kernel to run on one of the ColdFire
++	  V4e boards.
++
++config CFV4E
++	bool
++	depends on COLDFIRE
++	select MMU_CFV4E if MMU
++	default y
++
+ config AMIGA
+ 	bool "Amiga support"
+ 	depends on !MMU_SUN3
+@@ -294,14 +308,53 @@ config M68060
+ 	  If you anticipate running this kernel on a computer with a MC68060
+ 	  processor, say Y. Otherwise, say N.
+ 
++config M54455
++	bool "MCF54455 support"
++	depends on COLDFIRE
++	default y
++	help
++          This option will add support for the MCF54455 processor with mmu.
++
++config MCFCLK
++	int "M54455EVB System Clock"
++	depends on M54455
++	default 266666666
++	help
++	  System clock for EVB.  Usually 266MHz for u-boot and 200MHz for dBUG.
++
++config MCF_USER_HALT
++	bool "Coldfire User Halt Enable"
++	depends on M54455
++	default n
++	help
++	  Enables the HALT instruction in User Mode.
++
+ config MMU_MOTOROLA
+ 	bool
+-	depends on MMU && !MMU_SUN3
++	depends on MMU && !MMU_SUN3 && !COLDFIRE
+ 	default y
+ 
+ config MMU_SUN3
+ 	bool
+ 
++config MMU_CFV4E
++	bool
++
++config SDRAM_BASE
++	hex
++	depends on M54455
++	default 0x40000000
++
++config SDRAM_SIZE
++	hex
++	depends on M54455
++	default 0x0FFFFFFF
++
++config NOR_FLASH_BASE
++	hex "NOR Flash Base Address"
++	depends on M54455
++	default 0x00000000
++
+ config M68KFPU_EMU
+ 	bool "Math emulation support (EXPERIMENTAL)"
+ 	depends on EXPERIMENTAL
+@@ -468,6 +521,14 @@ config ZONE_DMA
+ source "drivers/pci/Kconfig"
+ 
+ source "drivers/zorro/Kconfig"
++endmenu
++
++menu "Power management options"
++
++config PM
++	bool "Power Management support"
++	help
++	  Support processor power management modes
+ 
+ endmenu
+ 
+@@ -647,7 +708,7 @@ config DN_SERIAL
+ 
+ config SERIAL_CONSOLE
+ 	bool "Support for serial port console"
+-	depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
++	depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO || COLDFIRE) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL || SERIAL_COLDFIRE)
+ 	---help---
+ 	  If you say Y here, it will be possible to use a serial port as the
+ 	  system console (the system console is the device which receives all
+--- a/arch/m68k/Kconfig.debug
++++ b/arch/m68k/Kconfig.debug
+@@ -2,4 +2,13 @@ menu "Kernel hacking"
+ 
+ source "lib/Kconfig.debug"
+ 
++config BOOTPARAM
++	bool 'Compiled-in Kernel Boot Parameter'
++	depends on COLDFIRE
++
++config BOOTPARAM_STRING
++	string 'Kernel Boot Parameter'
++	default 'console=ttyS0,115200'
++	depends on BOOTPARAM
++
+ endmenu
+--- a/arch/m68k/Makefile
++++ b/arch/m68k/Makefile
+@@ -16,7 +16,9 @@
+ KBUILD_DEFCONFIG := amiga_defconfig
+ 
+ # override top level makefile
++ifndef CONFIG_COLDFIRE
+ AS += -m68020
++endif
+ LDFLAGS := -m m68kelf
+ LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
+ ifneq ($(SUBARCH),$(ARCH))
+@@ -36,6 +38,7 @@ CHECKFLAGS += -D__mc68000__
+ KBUILD_CFLAGS += -pipe -fno-strength-reduce -ffixed-a2
+ 
+ # enable processor switch if compiled only for a single cpu
++ifndef CONFIG_COLDFIRE
+ ifndef CONFIG_M68020
+ ifndef CONFIG_M68030
+ 
+@@ -49,6 +52,12 @@ endif
+ 
+ endif
+ endif
++endif
++
++ifdef CONFIG_M54455
++CFLAGS := $(CFLAGS) -march=isac -mcpu=54455 -msoft-float -g 
++AFLAGS := $(AFLAGS) -march=isac -mcpu=54455 -msoft-float  
++endif
+ 
+ ifdef CONFIG_KGDB
+ # If configured for kgdb support, include debugging infos and keep the
+@@ -57,8 +66,12 @@ KBUILD_CFLAGS := $(subst -fomit-frame-po
+ endif
+ 
+ ifndef CONFIG_SUN3
++ifndef CONFIG_COLDFIRE
+ head-y := arch/m68k/kernel/head.o
+ else
++head-y := arch/m68k/coldfire/head.o
++endif
++else
+ head-y := arch/m68k/kernel/sun3-head.o
+ endif
+ 
+@@ -79,6 +92,7 @@ core-$(CONFIG_SUN3)		+= arch/m68k/sun3/	
+ core-$(CONFIG_M68040)		+= arch/m68k/fpsp040/
+ core-$(CONFIG_M68060)		+= arch/m68k/ifpsp060/
+ core-$(CONFIG_M68KFPU_EMU)	+= arch/m68k/math-emu/
++core-$(CONFIG_COLDFIRE)		+= arch/m68k/coldfire/
+ 
+ all:	zImage
+ 
+--- a/arch/m68k/kernel/Makefile
++++ b/arch/m68k/kernel/Makefile
+@@ -2,14 +2,19 @@
+ # Makefile for the linux kernel.
+ #
+ 
+-ifndef CONFIG_SUN3
+-  extra-y := head.o
++ifdef CONFIG_SUN3
++  extra-y := sun3-head.o vmlinux.lds
++  obj-y := entry.o signal.o ints.o
+ else
+-  extra-y := sun3-head.o
++ifndef CONFIG_COLDFIRE
++  extra-y := head.o vmlinux.lds
++  obj-y := entry.o signal.o traps.o ints.o
++else   # CONFIG_COLDFIRE
++  extra-y := ../coldfire/head.o vmlinux.lds
++endif
+ endif
+-extra-y	+= vmlinux.lds
+ 
+-obj-y	:= entry.o process.o traps.o ints.o signal.o ptrace.o module.o \
++obj-y	+= process.o ptrace.o module.o \
+ 	   sys_m68k.o time.o semaphore.o setup.o m68k_ksyms.o devres.o
+ 
+ devres-y = ../../../kernel/irq/devres.o
+--- a/arch/m68k/kernel/asm-offsets.c
++++ b/arch/m68k/kernel/asm-offsets.c
+@@ -58,8 +58,15 @@ int main(void)
+ 	DEFINE(PT_A2, offsetof(struct pt_regs, a2));
+ 	DEFINE(PT_PC, offsetof(struct pt_regs, pc));
+ 	DEFINE(PT_SR, offsetof(struct pt_regs, sr));
++#ifdef CONFIG_COLDFIRE
++	/* Need to get the context out of struct mm for ASID setting */
++	DEFINE(MM_CONTEXT, offsetof(struct mm_struct, context));
++	/* Coldfire exception frame has vector *before* pc */
++	DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) - 4);
++#else
+ 	/* bitfields are a bit difficult */
+ 	DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4);
++#endif
+ 
+ 	/* offsets into the irq_handler struct */
+ 	DEFINE(IRQ_HANDLER, offsetof(struct irq_node, handler));
+--- a/arch/m68k/kernel/dma.c
++++ b/arch/m68k/kernel/dma.c
+@@ -17,6 +17,7 @@
+ void *dma_alloc_coherent(struct device *dev, size_t size,
+ 			 dma_addr_t *handle, gfp_t flag)
+ {
++#ifndef CONFIG_M54455
+ 	struct page *page, **map;
+ 	pgprot_t pgprot;
+ 	void *addr;
+@@ -55,6 +56,18 @@ void *dma_alloc_coherent(struct device *
+ 	kfree(map);
+ 
+ 	return addr;
++#else
++	/*
++	 * On the M5445x platform the memory allocated with GFP_DMA
++	 * is guaranteed to be DMA'able.
++	 */
++	void *addr;
++
++	size = PAGE_ALIGN(size);
++	addr = kmalloc(size, GFP_DMA);
++	*handle = virt_to_phys(addr);
++	return addr;
++#endif
+ }
+ EXPORT_SYMBOL(dma_alloc_coherent);
+ 
+@@ -62,7 +75,11 @@ void dma_free_coherent(struct device *de
+ 		       void *addr, dma_addr_t handle)
+ {
+ 	pr_debug("dma_free_coherent: %p, %x\n", addr, handle);
++#ifndef CONFIG_M54455
+ 	vfree(addr);
++#else
++	kfree(addr);
++#endif
+ }
+ EXPORT_SYMBOL(dma_free_coherent);
+ 
+--- a/arch/m68k/kernel/process.c
++++ b/arch/m68k/kernel/process.c
+@@ -191,6 +191,7 @@ EXPORT_SYMBOL(kernel_thread);
+ 
+ void flush_thread(void)
+ {
++#if !defined(CONFIG_COLDFIRE)
+ 	unsigned long zero = 0;
+ 	set_fs(USER_DS);
+ 	current->thread.fs = __USER_DS;
+@@ -198,6 +199,14 @@ void flush_thread(void)
+ 		asm volatile (".chip 68k/68881\n\t"
+ 			      "frestore %0@\n\t"
+ 			      ".chip 68k" : : "a" (&zero));
++#else
++	set_fs(USER_DS);
++	current->thread.fs = USER_DS;
++#if defined(CONFIG_FPU)
++	if (!FPU_IS_EMU)
++		asm volatile ("frestore %0@\n\t" : : "a" (&zero));
++#endif
++#endif
+ }
+ 
+ /*
+@@ -261,6 +270,7 @@ int copy_thread(int nr, unsigned long cl
+ 	 * Must save the current SFC/DFC value, NOT the value when
+ 	 * the parent was last descheduled - RGH  10-08-96
+ 	 */
++#if !defined(CONFIG_COLDFIRE)
+ 	p->thread.fs = get_fs().seg;
+ 
+ 	if (!FPU_IS_EMU) {
+@@ -272,9 +282,34 @@ int copy_thread(int nr, unsigned long cl
+ 				"fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
+ 				: : "m" (p->thread.fp[0]), "m" (p->thread.fpcntl[0])
+ 				: "memory");
++#else
++	p->thread.fs = get_fs();
++
++#if defined(CONFIG_FPU)
++	if (!FPU_IS_EMU) {
++		/* Copy the current fpu state */
++		asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0])
++			      : "memory");
++
++		if (p->thread.fpstate[0]) {
++			asm volatile ("fmovemd %/fp0-%/fp7,%0"
++				      : : "m" (p->thread.fp[0])
++				      : "memory");
++			asm volatile ("fmovel %/fpiar,%0"
++				      : : "m" (p->thread.fpcntl[0])
++				      : "memory");
++			asm volatile ("fmovel %/fpcr,%0"
++				      : : "m" (p->thread.fpcntl[1])
++				      : "memory");
++			asm volatile ("fmovel %/fpsr,%0"
++				      : : "m" (p->thread.fpcntl[2])
++				      : "memory");
++		}
+ 		/* Restore the state in case the fpu was busy */
+ 		asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
+ 	}
++#endif
++#endif
+ 
+ 	return 0;
+ }
+@@ -283,7 +318,9 @@ int copy_thread(int nr, unsigned long cl
+ 
+ int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
+ {
++#if !defined(CONFIG_COLDFIRE) || defined(CONFIG_FPU)
+ 	char fpustate[216];
++#endif
+ 
+ 	if (FPU_IS_EMU) {
+ 		int i;
+@@ -300,6 +337,7 @@ int dump_fpu (struct pt_regs *regs, stru
+ 	}
+ 
+ 	/* First dump the fpu context to avoid protocol violation.  */
++#if !defined(CONFIG_COLDFIRE)
+ 	asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
+ 	if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
+ 		return 0;
+@@ -310,6 +348,25 @@ int dump_fpu (struct pt_regs *regs, stru
+ 	asm volatile ("fmovemx %/fp0-%/fp7,%0"
+ 		:: "m" (fpu->fpregs[0])
+ 		: "memory");
++#elif defined(CONFIG_FPU)
++	asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
++	if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
++		return 0;
++
++	asm volatile ("fmovel %/fpiar,%0"
++		      : : "m" (fpu->fpcntl[0])
++		      : "memory");
++	asm volatile ("fmovel %/fpcr,%0"
++		      : : "m" (fpu->fpcntl[1])
++		      : "memory");
++	asm volatile ("fmovel %/fpsr,%0"
++		      : : "m" (fpu->fpcntl[2])
++		      : "memory");
++	asm volatile ("fmovemd %/fp0-%/fp7,%0"
++		      : : "m" (fpu->fpregs[0])
++		      : "memory");
++#endif
++
+ 	return 1;
+ }
+ EXPORT_SYMBOL(dump_fpu);
+--- a/arch/m68k/kernel/setup.c
++++ b/arch/m68k/kernel/setup.c
+@@ -67,13 +67,22 @@ EXPORT_SYMBOL(m68k_memory);
+ 
+ struct mem_info m68k_ramdisk;
+ 
++#if !defined(CONFIG_COLDFIRE)
+ static char m68k_command_line[CL_SIZE];
++#else
++char m68k_command_line[CL_SIZE];
++unsigned long uboot_info_stk;
++EXPORT_SYMBOL(uboot_info_stk);
++#endif
+ 
+ void (*mach_sched_init) (irq_handler_t handler) __initdata = NULL;
+ /* machine dependent irq functions */
+ void (*mach_init_IRQ) (void) __initdata = NULL;
+ void (*mach_get_model) (char *model);
+ int (*mach_get_hardware_list) (char *buffer);
++#ifdef CONFIG_COLDFIRE
++void (*mach_tick)(void);
++#endif
+ /* machine dependent timer functions */
+ unsigned long (*mach_gettimeoffset) (void);
+ int (*mach_hwclk) (int, struct rtc_time*);
+@@ -128,13 +137,17 @@ extern void config_hp300(void);
+ extern void config_q40(void);
+ extern void config_sun3x(void);
+ 
++#ifdef CONFIG_COLDFIRE
++void coldfire_sort_memrec(void);
++#endif
++
+ #define MASK_256K 0xfffc0000
+ 
+ extern void paging_init(void);
+ 
+ static void __init m68k_parse_bootinfo(const struct bi_record *record)
+ {
+-	while (record->tag != BI_LAST) {
++	while ((record->tag != BI_LAST) && !(CONFIG_COLDFIRE)) {
+ 		int unknown = 0;
+ 		const unsigned long *data = record->data;
+ 
+@@ -192,7 +205,11 @@ static void __init m68k_parse_bootinfo(c
+ 					      record->size);
+ 	}
+ 
+-	m68k_realnum_memory = m68k_num_memory;
++#ifdef CONFIG_COLDFIRE
++    coldfire_sort_memrec();
++#endif
++
++    m68k_realnum_memory = m68k_num_memory;
+ #ifdef CONFIG_SINGLE_MEMORY_CHUNK
+ 	if (m68k_num_memory > 1) {
+ 		printk("Ignoring last %i chunks of physical memory\n",
+@@ -205,7 +222,9 @@ static void __init m68k_parse_bootinfo(c
+ void __init setup_arch(char **cmdline_p)
+ {
+ 	extern int _etext, _edata, _end;
++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
+ 	int i;
++#endif
+ 
+ 	/* The bootinfo is located right after the kernel bss */
+ 	m68k_parse_bootinfo((const struct bi_record *)&_end);
+@@ -220,9 +239,10 @@ void __init setup_arch(char **cmdline_p)
+ 	 * We should really do our own FPU check at startup.
+ 	 * [what do we do with buggy 68LC040s? if we have problems
+ 	 *  with them, we should add a test to check_bugs() below] */
+-#ifndef CONFIG_M68KFPU_EMU_ONLY
++#if !defined(CONFIG_M68KFPU_EMU_ONLY) && defined(CONFIG_FPU)
+ 	/* clear the fpu if we have one */
+-	if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060)) {
++	if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060|
++			    FPU_CFV4E)) {
+ 		volatile int zero = 0;
+ 		asm volatile ("frestore %0" : : "m" (zero));
+ 	}
+@@ -310,13 +330,18 @@ void __init setup_arch(char **cmdline_p)
+ 		config_sun3x();
+ 		break;
+ #endif
++#ifdef CONFIG_COLDFIRE
++	case MACH_CFMMU:
++		config_coldfire();
++		break;
++#endif
+ 	default:
+ 		panic("No configuration setup");
+ 	}
+ 
+ 	paging_init();
+ 
+-#ifndef CONFIG_SUN3
++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
+ 	for (i = 1; i < m68k_num_memory; i++)
+ 		free_bootmem_node(NODE_DATA(i), m68k_memory[i].addr,
+ 				  m68k_memory[i].size);
+@@ -343,6 +368,10 @@ void __init setup_arch(char **cmdline_p)
+ 
+ #endif /* !CONFIG_SUN3 */
+ 
++#ifdef CONFIG_COLDFIRE
++	mmu_context_init();
++#endif
++
+ /* set ISA defs early as possible */
+ #if defined(CONFIG_ISA) && defined(MULTI_ISA)
+ #if defined(CONFIG_Q40)
+@@ -373,6 +402,7 @@ static int show_cpuinfo(struct seq_file 
+ #define LOOP_CYCLES_68030	(8)
+ #define LOOP_CYCLES_68040	(3)
+ #define LOOP_CYCLES_68060	(1)
++#define LOOP_CYCLES_COLDFIRE	(2)
+ 
+ 	if (CPU_IS_020) {
+ 		cpu = "68020";
+@@ -386,6 +416,9 @@ static int show_cpuinfo(struct seq_file 
+ 	} else if (CPU_IS_060) {
+ 		cpu = "68060";
+ 		clockfactor = LOOP_CYCLES_68060;
++	} else if (CPU_IS_CFV4E) {
++		cpu = "ColdFire V4e";
++		clockfactor = LOOP_CYCLES_COLDFIRE;
+ 	} else {
+ 		cpu = "680x0";
+ 		clockfactor = 0;
+@@ -404,6 +437,8 @@ static int show_cpuinfo(struct seq_file 
+ 		fpu = "68060";
+ 	else if (m68k_fputype & FPU_SUNFPA)
+ 		fpu = "Sun FPA";
++	else if (m68k_fputype & FPU_CFV4E)
++		fpu = "ColdFire V4e";
+ 	else
+ 		fpu = "none";
+ #endif
+@@ -420,6 +455,8 @@ static int show_cpuinfo(struct seq_file 
+ 		mmu = "Sun-3";
+ 	else if (m68k_mmutype & MMU_APOLLO)
+ 		mmu = "Apollo";
++	else if (m68k_mmutype & MMU_CFV4E)
++		mmu = "ColdFire";
+ 	else
+ 		mmu = "unknown";
+ 
+@@ -482,7 +519,7 @@ int get_hardware_list(char *buffer)
+ 
+ void check_bugs(void)
+ {
+-#ifndef CONFIG_M68KFPU_EMU
++#if !defined(CONFIG_M68KFPU_EMU) && !defined(CONFIG_M54455)
+ 	if (m68k_fputype == 0) {
+ 		printk(KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
+ 			"WHICH IS REQUIRED BY LINUX/M68K ***\n");
+--- a/arch/m68k/kernel/time.c
++++ b/arch/m68k/kernel/time.c
+@@ -40,6 +40,11 @@ static inline int set_rtc_mmss(unsigned 
+  */
+ static irqreturn_t timer_interrupt(int irq, void *dummy)
+ {
++#ifdef CONFIG_COLDFIRE
++	/* kick hardware timer if necessary */
++	if (mach_tick)
++		mach_tick();
++#endif
+ 	do_timer(1);
+ #ifndef CONFIG_SMP
+ 	update_process_times(user_mode(get_irq_regs()));
+--- a/arch/m68k/kernel/vmlinux.lds.S
++++ b/arch/m68k/kernel/vmlinux.lds.S
+@@ -5,6 +5,8 @@ PHDRS
+ }
+ #ifdef CONFIG_SUN3
+ #include "vmlinux-sun3.lds"
++#elif CONFIG_COLDFIRE
++#include "../coldfire/vmlinux-cf.lds"
+ #else
+ #include "vmlinux-std.lds"
+ #endif
diff --git a/target/linux/coldfire/patches/006-mcfv4e_arch_lib_mods.patch b/target/linux/coldfire/patches/006-mcfv4e_arch_lib_mods.patch
new file mode 100644
index 0000000000..f699e5fb45
--- /dev/null
+++ b/target/linux/coldfire/patches/006-mcfv4e_arch_lib_mods.patch
@@ -0,0 +1,564 @@
+From a9faf34ba120d9d39ff0c7656ee3de12a110e22a Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 31 Oct 2007 16:57:05 -0600
+Subject: [PATCH] Core Coldfire/MCF5445x arch lib changes.
+
+LTIBName: mcfv4e-arch-lib-mods
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/lib/checksum.c  |  124 +++++++++++++++++++++++
+ arch/m68k/lib/muldi3.c    |   10 ++
+ arch/m68k/lib/semaphore.S |   25 +++++
+ arch/m68k/lib/string.c    |   64 ++++++++++++
+ arch/m68k/lib/uaccess.c   |  242 +++++++++++++++++++++++++++++++++++++++++++++
+ 5 files changed, 465 insertions(+), 0 deletions(-)
+
+--- a/arch/m68k/lib/checksum.c
++++ b/arch/m68k/lib/checksum.c
+@@ -39,8 +39,131 @@
+  * computes a partial checksum, e.g. for TCP/UDP fragments
+  */
+ 
++#ifdef CONFIG_COLDFIRE
++
++static inline unsigned short from32to16(unsigned long x)
++{
++	/* add up 16-bit and 16-bit for 16+c bit */
++	x = (x & 0xffff) + (x >> 16);
++	/* add up carry.. */
++	x = (x & 0xffff) + (x >> 16);
++	return x;
++}
++
++static unsigned long do_csum(const unsigned char *buff, int len)
++{
++	int odd, count;
++	unsigned long result = 0;
++
++	if (len <= 0)
++		goto out;
++	odd = 1 & (unsigned long) buff;
++	if (odd) {
++		result = *buff;
++		len--;
++		buff++;
++	}
++	count = len >> 1;		/* nr of 16-bit words.. */
++	if (count) {
++		if (2 & (unsigned long) buff) {
++			result += *(unsigned short *) buff;
++			count--;
++			len -= 2;
++			buff += 2;
++		}
++		count >>= 1;		/* nr of 32-bit words.. */
++		if (count) {
++			unsigned long carry = 0;
++			do {
++				unsigned long w = *(unsigned long *) buff;
++				count--;
++				buff += 4;
++				result += carry;
++				result += w;
++				carry = (w > result);
++			} while (count);
++			result += carry;
++			result = (result & 0xffff) + (result >> 16);
++		}
++		if (len & 2) {
++			result += *(unsigned short *) buff;
++			buff += 2;
++		}
++	}
++	if (len & 1)
++		result += (*buff << 8);
++	result = from32to16(result);
++	if (odd)
++		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
++out:
++	return result;
++}
++
++/*
++ *	This is a version of ip_compute_csum() optimized for IP headers,
++ *	which always checksum on 4 octet boundaries.
++ */
++__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
++{
++	return ~do_csum(iph, ihl*4);
++}
++EXPORT_SYMBOL(ip_fast_csum);
++
++/*
++ * computes the checksum of a memory block at buff, length len,
++ * and adds in "sum" (32-bit)
++ *
++ * returns a 32-bit number suitable for feeding into itself
++ * or csum_tcpudp_magic
++ *
++ * this function must be called with even lengths, except
++ * for the last fragment, which may be odd
++ *
++ * it's best to have buff aligned on a 32-bit boundary
++ */
+ __wsum csum_partial(const void *buff, int len, __wsum sum)
+ {
++	unsigned int result = do_csum(buff, len);
++
++	/* add in old sum, and carry.. */
++	result += sum;
++	if (sum > result)
++		result += 1;
++	return result;
++}
++EXPORT_SYMBOL(csum_partial);
++
++/*
++ * copy from fs while checksumming, otherwise like csum_partial
++ */
++
++__wsum
++csum_partial_copy_from_user(const void __user *src, void *dst, int len,
++			    __wsum sum, int *csum_err)
++{
++	if (csum_err) *csum_err = 0;
++	memcpy(dst, src, len);
++	return csum_partial(dst, len, sum);
++}
++EXPORT_SYMBOL(csum_partial_copy_from_user);
++
++/*
++ * copy from ds while checksumming, otherwise like csum_partial
++ */
++
++__wsum
++csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
++{
++	memcpy(dst, src, len);
++	return csum_partial(dst, len, sum);
++}
++EXPORT_SYMBOL(csum_partial_copy_nocheck);
++
++#else /* !CONFIG_COLDFIRE */
++
++unsigned int
++csum_partial(const unsigned char *buff, int len, unsigned int sum)
++{
+ 	unsigned long tmp1, tmp2;
+ 	  /*
+ 	   * Experiments with ethernet and slip connections show that buff
+@@ -423,3 +546,4 @@ csum_partial_copy_nocheck(const void *sr
+     return(sum);
+ }
+ EXPORT_SYMBOL(csum_partial_copy_nocheck);
++#endif /* CONFIG_COLDFIRE */
+--- a/arch/m68k/lib/muldi3.c
++++ b/arch/m68k/lib/muldi3.c
+@@ -21,12 +21,22 @@ Boston, MA 02111-1307, USA.  */
+ 
+ #define BITS_PER_UNIT 8
+ 
++#ifdef CONFIG_COLDFIRE
++#define umul_ppmm(w1, w0, u, v) \
++  do { \
++       unsigned long long x; \
++       x = (unsigned long long)u * v; \
++       w0 = (unsigned long)(x & 0x00000000ffffffff); \
++       w1 = (unsigned long)(x & 0xffffffff00000000) >> 32; \
++     } while (0)
++#else /* CONFIG_COLDFIRE */
+ #define umul_ppmm(w1, w0, u, v) \
+   __asm__ ("mulu%.l %3,%1:%0"						\
+            : "=d" ((USItype)(w0)),					\
+              "=d" ((USItype)(w1))					\
+            : "%0" ((USItype)(u)),					\
+              "dmi" ((USItype)(v)))
++#endif /* CONFIG_COLDFIRE */
+ 
+ #define __umulsidi3(u, v) \
+   ({DIunion __w;							\
+--- a/arch/m68k/lib/semaphore.S
++++ b/arch/m68k/lib/semaphore.S
+@@ -16,11 +16,24 @@
+  * there is contention on the semaphore.
+  */
+ ENTRY(__down_failed)
++#ifndef CONFIG_COLDFIRE
+ 	moveml %a0/%d0/%d1,-(%sp)
++#else
++	movel %a0,-(%sp)
++	movel %d0,-(%sp)
++	movel %d1,-(%sp)
++#endif
+ 	movel %a1,-(%sp)
+ 	jbsr __down
+ 	movel (%sp)+,%a1
++#ifndef CONFIG_COLDFIRE
+ 	moveml (%sp)+,%a0/%d0/%d1
++#else
++	movel (%sp)+,%d1
++	movel (%sp)+,%d0
++	movel (%sp)+,%a0
++#endif
++
+ 	rts
+ 
+ ENTRY(__down_failed_interruptible)
+@@ -44,10 +57,22 @@ ENTRY(__down_failed_trylock)
+ 	rts
+ 
+ ENTRY(__up_wakeup)
++#ifndef CONFIG_COLDFIRE
+ 	moveml %a0/%d0/%d1,-(%sp)
++#else
++	movel %a0,-(%sp)
++	movel %d0,-(%sp)
++	movel %d1,-(%sp)
++#endif
+ 	movel %a1,-(%sp)
+ 	jbsr __up
+ 	movel (%sp)+,%a1
++#ifndef CONFIG_COLDFIRE
+ 	moveml (%sp)+,%a0/%d0/%d1
++#else
++	movel (%sp)+,%d1
++	movel (%sp)+,%d0
++	movel (%sp)+,%a0
++#endif
+ 	rts
+ 
+--- a/arch/m68k/lib/string.c
++++ b/arch/m68k/lib/string.c
+@@ -15,6 +15,7 @@ char *strcpy(char *dest, const char *src
+ }
+ EXPORT_SYMBOL(strcpy);
+ 
++#ifndef CONFIG_COLDFIRE
+ void *memset(void *s, int c, size_t count)
+ {
+ 	void *xs = s;
+@@ -143,6 +144,69 @@ void *memcpy(void *to, const void *from,
+ }
+ EXPORT_SYMBOL(memcpy);
+ 
++#else /* CONFIG_COLDFIRE */
++
++void *memset(void *s, int c, size_t count)
++{
++  unsigned long x;
++  void *originalTo;
++
++  for (x = 0; x < count; x++)
++    *(unsigned char *)s++ = (unsigned char)c;
++
++  return originalTo;
++}
++EXPORT_SYMBOL(memset);
++
++void *memcpy(void *to, const void *from, size_t n)
++{
++  void *xto = to;
++  size_t temp;
++
++  if (!n)
++    return xto;
++  if ((long) to & 1) {
++      char *cto = to;
++      const char *cfrom = from;
++      *cto++ = *cfrom++;
++      to = cto;
++      from = cfrom;
++      n--;
++    }
++  if (n > 2 && (long) to & 2) {
++      short *sto = to;
++      const short *sfrom = from;
++      *sto++ = *sfrom++;
++      to = sto;
++      from = sfrom;
++      n -= 2;
++    }
++  temp = n >> 2;
++  if (temp) {
++      long *lto = to;
++      const long *lfrom = from;
++      for (; temp; temp--)
++	*lto++ = *lfrom++;
++      to = lto;
++      from = lfrom;
++    }
++  if (n & 2) {
++      short *sto = to;
++      const short *sfrom = from;
++      *sto++ = *sfrom++;
++      to = sto;
++      from = sfrom;
++    }
++  if (n & 1) {
++      char *cto = to;
++      const char *cfrom = from;
++      *cto = *cfrom;
++    }
++  return xto;
++}
++EXPORT_SYMBOL(memcpy);
++#endif /* CONFIG_COLDFIRE */
++
+ void *memmove(void *dest, const void *src, size_t n)
+ {
+ 	void *xdest = dest;
+--- a/arch/m68k/lib/uaccess.c
++++ b/arch/m68k/lib/uaccess.c
+@@ -5,6 +5,7 @@
+  */
+ 
+ #include <linux/module.h>
++#ifndef CONFIG_COLDFIRE
+ #include <asm/uaccess.h>
+ 
+ unsigned long __generic_copy_from_user(void *to, const void __user *from,
+@@ -220,3 +221,244 @@ unsigned long __clear_user(void __user *
+     return res;
+ }
+ EXPORT_SYMBOL(__clear_user);
++
++#else /* CONFIG_COLDFIRE */
++
++#include <asm/cf_uaccess.h>
++
++unsigned long __generic_copy_from_user(void *to, const void *from,
++		unsigned long n)
++{
++    unsigned long tmp;
++    __asm__ __volatile__
++	("   tstl %2\n"
++	 "   jeq 2f\n"
++	 "1: movel (%1)+,%3\n"
++	 "   movel %3,(%0)+\n"
++	 "   subql #1,%2\n"
++	 "   jne 1b\n"
++	 "2: movel %4,%2\n"
++	 "   bclr #1,%2\n"
++	 "   jeq 4f\n"
++	 "3: movew (%1)+,%3\n"
++	 "   movew %3,(%0)+\n"
++	 "4: bclr #0,%2\n"
++	 "   jeq 6f\n"
++	 "5: moveb (%1)+,%3\n"
++	 "   moveb %3,(%0)+\n"
++	 "6:\n"
++	 ".section .fixup,\"ax\"\n"
++	 "   .even\n"
++	 "7: movel %2,%%d0\n"
++	 "71:clrl (%0)+\n"
++	 "   subql #1,%%d0\n"
++	 "   jne 71b\n"
++	 "   lsll #2,%2\n"
++	 "   addl %4,%2\n"
++	 "   btst #1,%4\n"
++	 "   jne 81f\n"
++	 "   btst #0,%4\n"
++	 "   jne 91f\n"
++	 "   jra 6b\n"
++	 "8: addql #2,%2\n"
++	 "81:clrw (%0)+\n"
++	 "   btst #0,%4\n"
++	 "   jne 91f\n"
++	 "   jra 6b\n"
++	 "9: addql #1,%2\n"
++	 "91:clrb (%0)+\n"
++	 "   jra 6b\n"
++	 ".previous\n"
++	 ".section __ex_table,\"a\"\n"
++	 "   .align 4\n"
++	 "   .long 1b,7b\n"
++	 "   .long 3b,8b\n"
++	 "   .long 5b,9b\n"
++	 ".previous"
++	 : "=a"(to), "=a"(from), "=d"(n), "=&d"(tmp)
++	 : "d"(n & 3), "0"(to), "1"(from), "2"(n/4)
++	 : "d0", "memory");
++    return n;
++}
++EXPORT_SYMBOL(__generic_copy_from_user);
++
++
++unsigned long __generic_copy_to_user(void *to, const void *from,
++		unsigned long n)
++{
++    unsigned long tmp;
++    __asm__ __volatile__
++	("   tstl %2\n"
++	 "   jeq 3f\n"
++	 "1: movel (%1)+,%3\n"
++	 "22:movel %3,(%0)+\n"
++	 "2: subql #1,%2\n"
++	 "   jne 1b\n"
++	 "3: movel %4,%2\n"
++	 "   bclr #1,%2\n"
++	 "   jeq 4f\n"
++	 "   movew (%1)+,%3\n"
++	 "24:movew %3,(%0)+\n"
++	 "4: bclr #0,%2\n"
++	 "   jeq 5f\n"
++	 "   moveb (%1)+,%3\n"
++	 "25:moveb %3,(%0)+\n"
++	 "5:\n"
++	 ".section .fixup,\"ax\"\n"
++	 "   .even\n"
++	 "60:addql #1,%2\n"
++	 "6: lsll #2,%2\n"
++	 "   addl %4,%2\n"
++	 "   jra 5b\n"
++	 "7: addql #2,%2\n"
++	 "   jra 5b\n"
++	 "8: addql #1,%2\n"
++	 "   jra 5b\n"
++	 ".previous\n"
++	 ".section __ex_table,\"a\"\n"
++	 "   .align 4\n"
++	 "   .long 1b,60b\n"
++	 "   .long 22b,6b\n"
++	 "   .long 2b,6b\n"
++	 "   .long 24b,7b\n"
++	 "   .long 3b,60b\n"
++	 "   .long 4b,7b\n"
++	 "   .long 25b,8b\n"
++	 "   .long 5b,8b\n"
++	 ".previous"
++	 : "=a"(to), "=a"(from), "=d"(n), "=&d"(tmp)
++	 : "r"(n & 3), "0"(to), "1"(from), "2"(n / 4)
++	 : "memory");
++    return n;
++}
++EXPORT_SYMBOL(__generic_copy_to_user);
++
++/*
++ * Copy a null terminated string from userspace.
++ */
++
++long strncpy_from_user(char *dst, const char *src, long count)
++{
++	long res = -EFAULT;
++	if (!(access_ok(VERIFY_READ, src, 1))) /* --tym-- */
++		return res;
++    if (count == 0) return count;
++    __asm__ __volatile__
++	("1: moveb (%2)+,%%d0\n"
++	 "12:moveb %%d0,(%1)+\n"
++	 "   jeq 2f\n"
++	 "   subql #1,%3\n"
++	 "   jne 1b\n"
++	 "2: subl %3,%0\n"
++	 "3:\n"
++	 ".section .fixup,\"ax\"\n"
++	 "   .even\n"
++	 "4: movel %4,%0\n"
++	 "   jra 3b\n"
++	 ".previous\n"
++	 ".section __ex_table,\"a\"\n"
++	 "   .align 4\n"
++	 "   .long 1b,4b\n"
++	 "   .long 12b,4b\n"
++	 ".previous"
++	 : "=d"(res), "=a"(dst), "=a"(src), "=d"(count)
++	 : "i"(-EFAULT), "0"(count), "1"(dst), "2"(src), "3"(count)
++	 : "d0", "memory");
++    return res;
++}
++EXPORT_SYMBOL(strncpy_from_user);
++
++/*
++ * Return the size of a string (including the ending 0)
++ *
++ * Return 0 on exception, a value greater than N if too long
++ */
++long strnlen_user(const char *src, long n)
++{
++    long res = -EFAULT;
++    if (!(access_ok(VERIFY_READ, src, 1))) /* --tym-- */
++	return res;
++
++	res = -(long)src;
++	__asm__ __volatile__
++		("1:\n"
++		 "   tstl %2\n"
++		 "   jeq 3f\n"
++		 "2: moveb (%1)+,%%d0\n"
++		 "22:\n"
++		 "   subql #1,%2\n"
++		 "   tstb %%d0\n"
++		 "   jne 1b\n"
++		 "   jra 4f\n"
++		 "3:\n"
++		 "   addql #1,%0\n"
++		 "4:\n"
++		 "   addl %1,%0\n"
++		 "5:\n"
++		 ".section .fixup,\"ax\"\n"
++		 "   .even\n"
++		 "6: moveq %3,%0\n"
++		 "   jra 5b\n"
++		 ".previous\n"
++		 ".section __ex_table,\"a\"\n"
++		 "   .align 4\n"
++		 "   .long 2b,6b\n"
++		 "   .long 22b,6b\n"
++		 ".previous"
++		 : "=d"(res), "=a"(src), "=d"(n)
++		 : "i"(0), "0"(res), "1"(src), "2"(n)
++		 : "d0");
++	return res;
++}
++EXPORT_SYMBOL(strnlen_user);
++
++
++/*
++ * Zero Userspace
++ */
++
++unsigned long __clear_user(void *to, unsigned long n)
++{
++    __asm__ __volatile__
++	("   tstl %1\n"
++	 "   jeq 3f\n"
++	 "1: movel %3,(%0)+\n"
++	 "2: subql #1,%1\n"
++	 "   jne 1b\n"
++	 "3: movel %2,%1\n"
++	 "   bclr #1,%1\n"
++	 "   jeq 4f\n"
++	 "24:movew %3,(%0)+\n"
++	 "4: bclr #0,%1\n"
++	 "   jeq 5f\n"
++	 "25:moveb %3,(%0)+\n"
++	 "5:\n"
++	 ".section .fixup,\"ax\"\n"
++	 "   .even\n"
++	 "61:addql #1,%1\n"
++	 "6: lsll #2,%1\n"
++	 "   addl %2,%1\n"
++	 "   jra 5b\n"
++	 "7: addql #2,%1\n"
++	 "   jra 5b\n"
++	 "8: addql #1,%1\n"
++	 "   jra 5b\n"
++	 ".previous\n"
++	 ".section __ex_table,\"a\"\n"
++	 "   .align 4\n"
++	 "   .long 1b,61b\n"
++	 "   .long 2b,6b\n"
++	 "   .long 3b,61b\n"
++	 "   .long 24b,7b\n"
++	 "   .long 4b,7b\n"
++	 "   .long 25b,8b\n"
++	 "   .long 5b,8b\n"
++	 ".previous"
++	 : "=a"(to), "=d"(n)
++	 : "r"(n & 3), "d"(0), "0"(to), "1"(n/4));
++    return n;
++}
++EXPORT_SYMBOL(__clear_user);
++
++#endif /* CONFIG_COLDFIRE */
++
diff --git a/target/linux/coldfire/patches/007-mcfv4e_arch_mm_mods_1.patch b/target/linux/coldfire/patches/007-mcfv4e_arch_mm_mods_1.patch
new file mode 100644
index 0000000000..2abd477465
--- /dev/null
+++ b/target/linux/coldfire/patches/007-mcfv4e_arch_mm_mods_1.patch
@@ -0,0 +1,513 @@
+From 2bef1f8ce148cce9e782f75f9537767c1d8c0eea Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 31 Oct 2007 16:58:27 -0600
+Subject: [PATCH] Core Coldfire/MCF5445x arch/mm changes.
+
+LTIBName: mcfv4e-arch-mm-mods-1
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/mm/Makefile |    1 +
+ arch/m68k/mm/cache.c  |   41 ++++++++
+ arch/m68k/mm/cf-mmu.c |  251 +++++++++++++++++++++++++++++++++++++++++++++++++
+ arch/m68k/mm/hwtest.c |    2 +
+ arch/m68k/mm/init.c   |    3 +-
+ arch/m68k/mm/kmap.c   |   13 +++
+ arch/m68k/mm/memory.c |   66 +++++++++++++-
+ 7 files changed, 373 insertions(+), 4 deletions(-)
+ create mode 100644 arch/m68k/mm/cf-mmu.c
+
+--- a/arch/m68k/mm/Makefile
++++ b/arch/m68k/mm/Makefile
+@@ -6,3 +6,4 @@ obj-y		:= cache.o init.o fault.o hwtest.
+ 
+ obj-$(CONFIG_MMU_MOTOROLA)	+= kmap.o memory.o motorola.o
+ obj-$(CONFIG_MMU_SUN3)		+= sun3kmap.o sun3mmu.o
++obj-$(CONFIG_MMU_CFV4E)		+= cf-mmu.o kmap.o memory.o
+--- a/arch/m68k/mm/cache.c
++++ b/arch/m68k/mm/cache.c
+@@ -10,7 +10,11 @@
+ #include <asm/pgalloc.h>
+ #include <asm/traps.h>
+ 
++#ifdef CONFIG_COLDFIRE
++#include <asm/cfcache.h>
++#endif /* CONFIG_COLDFIRE */
+ 
++#ifndef CONFIG_COLDFIRE
+ static unsigned long virt_to_phys_slow(unsigned long vaddr)
+ {
+ 	if (CPU_IS_060) {
+@@ -69,11 +73,45 @@ static unsigned long virt_to_phys_slow(u
+ 	}
+ 	return 0;
+ }
++#endif /* CONFIG_COLDFIRE */
++
+ 
+ /* Push n pages at kernel virtual address and clear the icache */
+ /* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
+ void flush_icache_range(unsigned long address, unsigned long endaddr)
+ {
++#ifdef CONFIG_COLDFIRE
++	unsigned long set;
++	unsigned long start_set;
++	unsigned long end_set;
++
++	start_set = address & _ICACHE_SET_MASK;
++	end_set = endaddr & _ICACHE_SET_MASK;
++
++	if (start_set > end_set) {
++	/* from the begining to the lowest address */
++		for (set = 0; set <= end_set; set += (0x10 - 3))
++			asm volatile ("cpushl %%ic,(%0)\n"
++				      "\taddq%.l #1,%0\n"
++				      "\tcpushl %%ic,(%0)\n"
++				      "\taddq%.l #1,%0\n"
++				      "\tcpushl %%ic,(%0)\n"
++				      "\taddq%.l #1,%0\n"
++				      "\tcpushl %%ic,(%0)" : : "a" (set));
++
++		/* next loop will finish the cache ie pass the hole */
++		end_set = LAST_ICACHE_ADDR;
++	}
++	for (set = start_set; set <= end_set; set += (0x10 - 3))
++		asm volatile ("cpushl %%ic,(%0)\n"
++			      "\taddq%.l #1,%0\n"
++			      "\tcpushl %%ic,(%0)\n"
++			      "\taddq%.l #1,%0\n"
++			      "\tcpushl %%ic,(%0)\n"
++			      "\taddq%.l #1,%0\n"
++			      "\tcpushl %%ic,(%0)" : : "a" (set));
++
++#else /* !CONFIG_COLDFIRE */
+ 
+ 	if (CPU_IS_040_OR_060) {
+ 		address &= PAGE_MASK;
+@@ -94,9 +132,11 @@ void flush_icache_range(unsigned long ad
+ 			      : "=&d" (tmp)
+ 			      : "di" (FLUSH_I));
+ 	}
++#endif /* CONFIG_COLDFIRE */
+ }
+ EXPORT_SYMBOL(flush_icache_range);
+ 
++#ifndef CONFIG_COLDFIRE
+ void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+ 			     unsigned long addr, int len)
+ {
+@@ -115,4 +155,5 @@ void flush_icache_user_range(struct vm_a
+ 			      : "di" (FLUSH_I));
+ 	}
+ }
++#endif /* CONFIG_COLDFIRE */
+ 
+--- /dev/null
++++ b/arch/m68k/mm/cf-mmu.c
+@@ -0,0 +1,251 @@
++/*
++ * linux/arch/m68k/mm/cf-mmu.c
++ *
++ * Based upon linux/arch/m68k/mm/sun3mmu.c
++ * Based upon linux/arch/ppc/mm/mmu_context.c
++ *
++ * Implementations of mm routines specific to the Coldfire MMU.
++ *
++ * Copyright (c) 2008 Freescale Semiconductor, Inc.
++ */
++
++#include <linux/signal.h>
++#include <linux/sched.h>
++#include <linux/mm.h>
++#include <linux/swap.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/types.h>
++#include <linux/init.h>
++#ifdef CONFIG_BLK_DEV_RAM
++#include <linux/blkdev.h>
++#endif
++#include <linux/bootmem.h>
++
++#include <asm/setup.h>
++#include <asm/uaccess.h>
++#include <asm/page.h>
++#include <asm/pgtable.h>
++#include <asm/system.h>
++#include <asm/machdep.h>
++#include <asm/io.h>
++#include <asm/mmu_context.h>
++#include <asm/cf_pgalloc.h>
++
++#include <asm/coldfire.h>
++#include <asm/tlbflush.h>
++
++mm_context_t next_mmu_context;
++unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
++
++atomic_t nr_free_contexts;
++struct mm_struct *context_mm[LAST_CONTEXT+1];
++void steal_context(void);
++
++
++const char bad_pmd_string[] = "Bad pmd in pte_alloc: %08lx\n";
++
++extern unsigned long empty_bad_page_table;
++extern unsigned long empty_bad_page;
++extern unsigned long num_pages;
++
++extern char __init_begin, __init_end;
++
++void free_initmem(void)
++{
++	unsigned long addr;
++	unsigned long start = (unsigned long)&__init_begin;
++	unsigned long end = (unsigned long)&__init_end;
++
++	printk(KERN_INFO "free_initmem: __init_begin = 0x%lx  __init_end = 0x%lx\n", start, end);
++
++	addr = (unsigned long)&__init_begin;
++	for (; addr < (unsigned long)&__init_end; addr += PAGE_SIZE) {
++		/* not currently used */
++		virt_to_page(addr)->flags &= ~(1 << PG_reserved);
++		init_page_count(virt_to_page(addr));
++		free_page(addr);
++		totalram_pages++;
++	}
++}
++
++/* Coldfire paging_init derived from sun3 */
++void __init paging_init(void)
++{
++	pgd_t * pg_dir;
++	pte_t * pg_table;
++	int i;
++	unsigned long address;
++	unsigned long next_pgtable;
++	unsigned long bootmem_end;
++	unsigned long zones_size[MAX_NR_ZONES];
++	unsigned long size;
++	enum zone_type zone;
++
++	empty_zero_page = (void *)alloc_bootmem_pages(PAGE_SIZE);
++	memset((void *)empty_zero_page, 0, PAGE_SIZE);
++
++	pg_dir = swapper_pg_dir;
++	memset(swapper_pg_dir, 0, sizeof (swapper_pg_dir));
++
++	size = num_pages * sizeof(pte_t);  
++	size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1);
++	next_pgtable = (unsigned long)alloc_bootmem_pages(size);
++
++	bootmem_end = (next_pgtable + size + PAGE_SIZE) & PAGE_MASK; 
++	pg_dir += PAGE_OFFSET >> PGDIR_SHIFT; 
++
++	address = PAGE_OFFSET;
++	while (address < (unsigned long)high_memory) 
++	{
++    		pg_table = (pte_t *)next_pgtable; 
++	    	next_pgtable += PTRS_PER_PTE * sizeof (pte_t);
++		pgd_val(*pg_dir) = (unsigned long) pg_table;
++		pg_dir++;
++
++		/* now change pg_table to kernel virtual addresses */
++		for (i=0; i<PTRS_PER_PTE; ++i, ++pg_table)
++		{
++			pte_t pte = pfn_pte(virt_to_pfn(address), PAGE_INIT);
++			if (address >= (unsigned long)high_memory)
++				pte_val (pte) = 0;
++
++			set_pte (pg_table, pte);
++			address += PAGE_SIZE;
++		}
++	}
++	
++	current->mm = NULL;
++
++	/* clear zones */
++	for (zone = 0; zone < MAX_NR_ZONES; zone++)
++		zones_size[zone] = 0x0;
++
++	/* allocate the bottom 32M (0x40x 0x41x) to DMA - head.S marks them NO CACHE */
++	/* JKM - this should be changed to allocate from the TOP (0x4f,0x4e) but the
++	 * allocator is being a bit challenging */
++        zones_size[ZONE_DMA] = (32*1024*1024) >> PAGE_SHIFT;
++
++	/* allocate the rest to NORMAL - head.S marks them CACHE */
++	zones_size[ZONE_NORMAL] = (((unsigned long)high_memory - PAGE_OFFSET) >> PAGE_SHIFT) - zones_size[0];
++
++	free_area_init(zones_size);
++}
++
++
++int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
++{
++        struct mm_struct *mm;
++        pgd_t *pgd;
++        pmd_t *pmd;
++        pte_t *pte;
++        unsigned long mmuar;
++        int asid;
++	int flags;
++
++	local_save_flags(flags);
++	local_irq_disable();
++
++	mmuar = ( dtlb ) ? regs->mmuar
++			 : regs->pc + (extension_word * sizeof(long));
++
++        mm = (!user_mode(regs) && (mmuar >= PAGE_OFFSET)) ? &init_mm
++							  : current->mm;
++        if (!mm) {
++	    local_irq_restore(flags);
++	    return (-1);
++	}
++
++        pgd = pgd_offset(mm, mmuar);
++        if (pgd_none(*pgd))  {
++	    local_irq_restore(flags);
++	    return (-1);
++	}
++	    
++    	pmd = pmd_offset(pgd, mmuar);
++    	if (pmd_none(*pmd)) {
++	    local_irq_restore(flags);
++	    return (-1);
++	}	
++    	
++	pte = (mmuar >= PAGE_OFFSET) ? pte_offset_kernel(pmd, mmuar)
++	                             : pte_offset_map(pmd, mmuar);
++    	if (pte_none(*pte) || !pte_present(*pte)) {
++	    local_irq_restore(flags);
++	    return (-1);		
++	}
++
++	if (write) {
++            if (!pte_write(*pte)) {
++		local_irq_restore(flags);
++	    	return (-1);
++	    }
++    	    set_pte(pte, pte_mkdirty(*pte));
++	}
++	
++        set_pte(pte, pte_mkyoung(*pte));
++        asid = mm->context & 0xff;
++        if (!pte_dirty(*pte) && mmuar<=PAGE_OFFSET)
++    	    set_pte(pte, pte_wrprotect(*pte));
++
++        *MMUTR = (mmuar & PAGE_MASK) | (asid << CF_ASID_MMU_SHIFT)
++               | (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK ) >> CF_PAGE_MMUTR_SHIFT)
++               | MMUTR_V;
++
++        *MMUDR = (pte_val(*pte) & PAGE_MASK) 
++	       | ((pte->pte) & CF_PAGE_MMUDR_MASK)
++               | MMUDR_SZ8K | MMUDR_X;
++	    
++	if ( dtlb )
++    	    *MMUOR = MMUOR_ACC | MMUOR_UAA;
++	else
++	    *MMUOR = MMUOR_ITLB | MMUOR_ACC | MMUOR_UAA;
++
++	asm ("nop");
++	/*printk("cf_tlb_miss: va=%lx, pa=%lx\n", (mmuar & PAGE_MASK), 
++		  (pte_val(*pte)  & PAGE_MASK));*/
++	local_irq_restore(flags);
++        return (0);
++}
++
++
++/* The following was taken from arch/ppc/mmu_context.c
++ *
++ * Initialize the context management stuff.
++ */
++void __init mmu_context_init(void)
++{
++	/*
++	 * Some processors have too few contexts to reserve one for
++	 * init_mm, and require using context 0 for a normal task.
++	 * Other processors reserve the use of context zero for the kernel.
++	 * This code assumes FIRST_CONTEXT < 32.
++	 */
++	context_map[0] = (1 << FIRST_CONTEXT) - 1;
++	next_mmu_context = FIRST_CONTEXT;
++	atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
++}
++
++/*
++ * Steal a context from a task that has one at the moment.
++ * This is only used on 8xx and 4xx and we presently assume that
++ * they don't do SMP.  If they do then thicfpgalloc.hs will have to check
++ * whether the MM we steal is in use.
++ * We also assume that this is only used on systems that don't
++ * use an MMU hash table - this is true for 8xx and 4xx.
++ * This isn't an LRU system, it just frees up each context in
++ * turn (sort-of pseudo-random replacement :).  This would be the
++ * place to implement an LRU scheme if anyone was motivated to do it.
++ *  -- paulus
++ */
++void steal_context(void)
++{
++	struct mm_struct *mm;
++	/* free up context `next_mmu_context' */
++	/* if we shouldn't free context 0, don't... */
++	if (next_mmu_context < FIRST_CONTEXT)
++		next_mmu_context = FIRST_CONTEXT;
++	mm = context_mm[next_mmu_context];
++	flush_tlb_mm(mm);
++	destroy_context(mm);
++}
+--- a/arch/m68k/mm/hwtest.c
++++ b/arch/m68k/mm/hwtest.c
+@@ -25,6 +25,7 @@
+ 
+ #include <linux/module.h>
+ 
++#ifndef CONFIG_COLDFIRE
+ int hwreg_present( volatile void *regp )
+ {
+     int	ret = 0;
+@@ -82,4 +83,5 @@ int hwreg_write( volatile void *regp, un
+ 	return( ret );
+ }
+ EXPORT_SYMBOL(hwreg_write);
++#endif
+ 
+--- a/arch/m68k/mm/init.c
++++ b/arch/m68k/mm/init.c
+@@ -122,7 +122,6 @@ void __init mem_init(void)
+ 	if (MACH_IS_ATARI)
+ 		atari_stram_mem_init_hook();
+ #endif
+-
+ 	/* this will put all memory onto the freelists */
+ 	totalram_pages = num_physpages = 0;
+ 	for_each_online_pgdat(pgdat) {
+@@ -146,7 +145,7 @@ void __init mem_init(void)
+ 		}
+ 	}
+ 
+-#ifndef CONFIG_SUN3
++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
+ 	/* insert pointer tables allocated so far into the tablelist */
+ 	init_pointer_table((unsigned long)kernel_pg_dir);
+ 	for (i = 0; i < PTRS_PER_PGD; i++) {
+--- a/arch/m68k/mm/kmap.c
++++ b/arch/m68k/mm/kmap.c
+@@ -24,7 +24,11 @@
+ 
+ #undef DEBUG
+ 
++#ifndef CONFIG_COLDFIRE
+ #define PTRTREESIZE	(256*1024)
++#else
++#define PTRTREESIZE     PAGE_SIZE
++#endif
+ 
+ /*
+  * For 040/060 we can use the virtual memory area like other architectures,
+@@ -50,7 +54,11 @@ static inline void free_io_area(void *ad
+ 
+ #else
+ 
++#ifdef CONFIG_COLDFIRE
++#define IO_SIZE         PAGE_SIZE
++#else
+ #define IO_SIZE		(256*1024)
++#endif
+ 
+ static struct vm_struct *iolist;
+ 
+@@ -170,7 +178,12 @@ void __iomem *__ioremap(unsigned long ph
+ 			break;
+ 		}
+ 	} else {
++#ifndef CONFIG_COLDFIRE
+ 		physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY);
++#else
++		physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY | \
++			     _PAGE_READWRITE);
++#endif
+ 		switch (cacheflag) {
+ 		case IOMAP_NOCACHE_SER:
+ 		case IOMAP_NOCACHE_NONSER:
+--- a/arch/m68k/mm/memory.c
++++ b/arch/m68k/mm/memory.c
+@@ -203,7 +203,38 @@ static inline void pushcl040(unsigned lo
+ 
+ void cache_clear (unsigned long paddr, int len)
+ {
+-    if (CPU_IS_040_OR_060) {
++    if (CPU_IS_CFV4E) {
++	unsigned long set;
++	unsigned long start_set;
++	unsigned long end_set;
++
++	start_set = paddr & _ICACHE_SET_MASK;
++	end_set = (paddr+len-1) & _ICACHE_SET_MASK;
++
++	if (start_set > end_set) {
++		/* from the begining to the lowest address */
++		for (set = 0; set <= end_set; set += (0x10 - 3))
++			asm volatile("cpushl %%bc,(%0)\n"
++				     "\taddq%.l #1,%0\n"
++				     "\tcpushl %%bc,(%0)\n"
++				     "\taddq%.l #1,%0\n"
++				     "\tcpushl %%bc,(%0)\n"
++				     "\taddq%.l #1,%0\n"
++				     "\tcpushl %%bc,(%0)" : : "a" (set));
++
++		/* next loop will finish the cache ie pass the hole */
++		end_set = LAST_ICACHE_ADDR;
++	}
++	for (set = start_set; set <= end_set; set += (0x10 - 3))
++		asm volatile("cpushl %%bc,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%bc,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%bc,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%bc,(%0)" : : "a" (set));
++
++    } else if (CPU_IS_040_OR_060) {
+ 	int tmp;
+ 
+ 	/*
+@@ -250,7 +281,38 @@ EXPORT_SYMBOL(cache_clear);
+ 
+ void cache_push (unsigned long paddr, int len)
+ {
+-    if (CPU_IS_040_OR_060) {
++    if (CPU_IS_CFV4E) {
++	unsigned long set;
++	unsigned long start_set;
++	unsigned long end_set;
++
++	start_set = paddr & _ICACHE_SET_MASK;
++	end_set = (paddr+len-1) & _ICACHE_SET_MASK;
++
++	if (start_set > end_set) {
++		/* from the begining to the lowest address */
++		for (set = 0; set <= end_set; set += (0x10 - 3))
++			asm volatile("cpushl %%bc,(%0)\n"
++				     "\taddq%.l #1,%0\n"
++				     "\tcpushl %%bc,(%0)\n"
++				     "\taddq%.l #1,%0\n"
++				     "\tcpushl %%bc,(%0)\n"
++				     "\taddq%.l #1,%0\n"
++				     "\tcpushl %%bc,(%0)" : : "a" (set));
++
++		/* next loop will finish the cache ie pass the hole */
++		end_set = LAST_ICACHE_ADDR;
++	}
++	for (set = start_set; set <= end_set; set += (0x10 - 3))
++		asm volatile("cpushl %%bc,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%bc,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%bc,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%bc,(%0)" : : "a" (set));
++
++    } else if (CPU_IS_040_OR_060) {
+ 	int tmp = PAGE_SIZE;
+ 
+ 	/*
diff --git a/target/linux/coldfire/patches/008-mcfv4e_coldfire_code.patch b/target/linux/coldfire/patches/008-mcfv4e_coldfire_code.patch
new file mode 100644
index 0000000000..9da89c802b
--- /dev/null
+++ b/target/linux/coldfire/patches/008-mcfv4e_coldfire_code.patch
@@ -0,0 +1,4484 @@
+From 70b2bd01829b38a1a79caeda05d436b2e5fecf82 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 31 Oct 2007 17:00:18 -0600
+Subject: [PATCH] Core Coldfire/MCF5445x specific code.
+
+LTIBName: mcfv4e-coldfire-code
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/Makefile       |   11 +
+ arch/m68k/coldfire/cache.c        |  215 +++++++++
+ arch/m68k/coldfire/config.c       |  420 ++++++++++++++++++
+ arch/m68k/coldfire/entry.S        |  701 ++++++++++++++++++++++++++++++
+ arch/m68k/coldfire/head.S         |  474 ++++++++++++++++++++
+ arch/m68k/coldfire/ints.c         |  384 ++++++++++++++++
+ arch/m68k/coldfire/iomap.c        |   54 +++
+ arch/m68k/coldfire/mcf5445x-pci.c |  427 ++++++++++++++++++
+ arch/m68k/coldfire/muldi3.S       |   64 +++
+ arch/m68k/coldfire/pci.c          |  245 +++++++++++
+ arch/m68k/coldfire/signal.c       |  868 +++++++++++++++++++++++++++++++++++++
+ arch/m68k/coldfire/traps.c        |  454 +++++++++++++++++++
+ arch/m68k/coldfire/vmlinux-cf.lds |   92 ++++
+ 13 files changed, 4409 insertions(+), 0 deletions(-)
+ create mode 100644 arch/m68k/coldfire/Makefile
+ create mode 100644 arch/m68k/coldfire/cache.c
+ create mode 100644 arch/m68k/coldfire/config.c
+ create mode 100644 arch/m68k/coldfire/entry.S
+ create mode 100644 arch/m68k/coldfire/head.S
+ create mode 100644 arch/m68k/coldfire/ints.c
+ create mode 100644 arch/m68k/coldfire/iomap.c
+ create mode 100644 arch/m68k/coldfire/mcf5445x-pci.c
+ create mode 100644 arch/m68k/coldfire/muldi3.S
+ create mode 100644 arch/m68k/coldfire/pci.c
+ create mode 100644 arch/m68k/coldfire/signal.c
+ create mode 100644 arch/m68k/coldfire/traps.c
+ create mode 100644 arch/m68k/coldfire/vmlinux-cf.lds
+
+--- /dev/null
++++ b/arch/m68k/coldfire/Makefile
+@@ -0,0 +1,11 @@
++#
++# Makefile for Linux arch/m68k/coldfire source directory
++#
++
++obj-y:= entry.o config.o cache.o signal.o muldi3.o traps.o ints.o
++
++ifneq ($(strip $(CONFIG_USB) $(CONFIG_USB_GADGET_MCF5445X)),)
++	obj-y	+= usb.o usb/
++endif
++
++obj-$(CONFIG_PCI)	+= pci.o mcf5445x-pci.o iomap.o
+--- /dev/null
++++ b/arch/m68k/coldfire/cache.c
+@@ -0,0 +1,215 @@
++/*
++ *  linux/arch/m68k/coldifre/cache.c
++ *
++ *  Matt Waddel Matt.Waddel@freescale.com
++ *  Copyright Freescale Semiconductor, Inc. 2007
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License, or
++ *  (at your option) any later version.
++ */
++
++#include <linux/interrupt.h>
++#include <asm/cfcache.h>
++#include <asm/coldfire.h>
++#include <asm/system.h>
++
++#define _DCACHE_SIZE (2*16384)
++#define _ICACHE_SIZE (2*16384)
++
++#define _SET_SHIFT 4
++
++/*
++ * Masks for cache sizes.  Programming note: because the set size is a
++ * power of two, the mask is also the last address in the set.
++ */
++
++#define _DCACHE_SET_MASK ((_DCACHE_SIZE/64-1)<<_SET_SHIFT)
++#define _ICACHE_SET_MASK ((_ICACHE_SIZE/64-1)<<_SET_SHIFT)
++#define LAST_DCACHE_ADDR _DCACHE_SET_MASK
++#define LAST_ICACHE_ADDR _ICACHE_SET_MASK
++
++/************************************************************
++ *  Routine to cleanly flush the cache, pushing all lines and
++ *  invalidating them.
++ *
++ *  The is the flash-resident version, used after copying the .text
++ *  segment from flash to ram.
++ *************************************************************/
++void FLASHDcacheFlushInvalidate(void)
++	__attribute__ ((section (".text_loader")));
++
++void FLASHDcacheFlushInvalidate()
++{
++	unsigned long set;
++	unsigned long start_set;
++	unsigned long end_set;
++
++	start_set = 0;
++	end_set = (unsigned long)LAST_DCACHE_ADDR;
++
++	for (set = start_set; set < end_set; set += (0x10 - 3))
++		asm volatile("cpushl %%dc,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%dc,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%dc,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%dc,(%0)" : : "a" (set));
++}
++
++/************************************************************
++ *  Routine to cleanly flush the cache, pushing all lines and
++ *  invalidating them.
++ *
++ *************************************************************/
++void DcacheFlushInvalidate()
++{
++	unsigned long set;
++	unsigned long start_set;
++	unsigned long end_set;
++
++	start_set = 0;
++	end_set = (unsigned long)LAST_DCACHE_ADDR;
++
++	for (set = start_set; set < end_set; set += (0x10 - 3))
++		asm volatile("cpushl %%dc,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%dc,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%dc,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%dc,(%0)" : : "a" (set));
++}
++
++
++
++/******************************************************************************
++ *  Routine to cleanly flush the a block of cache, pushing all relevant lines
++ *  and invalidating them.
++ *
++ ******************************************************************************/
++void DcacheFlushInvalidateCacheBlock(void *start, unsigned long size)
++{
++	unsigned long set;
++	unsigned long start_set;
++	unsigned long end_set;
++
++	/* if size is bigger than the cache can store
++	 * set the size to the maximum amount
++	 */
++
++	if (size > LAST_DCACHE_ADDR)
++		size = LAST_DCACHE_ADDR;
++
++	start_set = ((unsigned long)start) & _DCACHE_SET_MASK;
++	end_set = ((unsigned long)(start+size-1)) & _DCACHE_SET_MASK;
++
++	if (start_set > end_set) {
++		/* from the begining to the lowest address */
++		for (set = 0; set <= end_set; set += (0x10 - 3))
++			asm volatile("cpushl %%dc,(%0)\n"
++				     "\taddq%.l #1,%0\n"
++				     "\tcpushl %%dc,(%0)\n"
++				     "\taddq%.l #1,%0\n"
++				     "\tcpushl %%dc,(%0)\n"
++				     "\taddq%.l #1,%0\n"
++				     "\tcpushl %%dc,(%0)" : : "a" (set));
++
++		/* next loop will finish the cache ie pass the hole */
++		end_set = LAST_DCACHE_ADDR;
++	}
++	for (set = start_set; set <= end_set; set += (0x10 - 3))
++		asm volatile("cpushl %%dc,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%dc,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%dc,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%dc,(%0)" : : "a" (set));
++}
++
++
++void IcacheInvalidateCacheBlock(void *start, unsigned long size)
++{
++	unsigned long set;
++	unsigned long start_set;
++	unsigned long end_set;
++
++	/* if size is bigger than the cache can store
++	 * set the size to the maximum ammount
++	 */
++
++	if (size > LAST_ICACHE_ADDR)
++		size = LAST_ICACHE_ADDR;
++
++	start_set = ((unsigned long)start) & _ICACHE_SET_MASK;
++	end_set = ((unsigned long)(start+size-1)) & _ICACHE_SET_MASK;
++
++	if (start_set > end_set) {
++		/* from the begining to the lowest address */
++		for (set = 0; set <= end_set; set += (0x10 - 3))
++			asm volatile("cpushl %%ic,(%0)\n"
++				     "\taddq%.l #1,%0\n"
++				     "\tcpushl %%ic,(%0)\n"
++				     "\taddq%.l #1,%0\n"
++				     "\tcpushl %%ic,(%0)\n"
++				     "\taddq%.l #1,%0\n"
++				     "\tcpushl %%ic,(%0)" : : "a" (set));
++
++		/* next loop will finish the cache ie pass the hole */
++		end_set = LAST_ICACHE_ADDR;
++	}
++	for (set = start_set; set <= end_set; set += (0x10 - 3))
++		asm volatile("cpushl %%ic,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%ic,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%ic,(%0)\n"
++			     "\taddq%.l #1,%0\n"
++			     "\tcpushl %%ic,(%0)" : : "a" (set));
++}
++
++
++/********************************************************************
++ *  Disable the data cache completely
++ ********************************************************************/
++void DcacheDisable(void)
++{
++	int newValue;
++	unsigned long flags;
++
++	local_save_flags(flags);
++	local_irq_disable();
++
++	DcacheFlushInvalidate();      /* begin by flushing the cache */
++	newValue = CACHE_DISABLE_MODE; /* disable it */
++	cacr_set(newValue);
++	local_irq_restore(flags);
++}
++
++/********************************************************************
++ *  Unconditionally enable the data cache
++ ********************************************************************/
++void DcacheEnable(void)
++{
++	cacr_set(CACHE_INITIAL_MODE);
++}
++
++
++unsigned long shadow_cacr;
++
++void cacr_set(unsigned long x)
++{
++	shadow_cacr = x;
++
++	__asm__ __volatile__ ("movec %0, %%cacr"
++			      : /* no outputs */
++			      : "r" (shadow_cacr));
++}
++
++unsigned long cacr_get(void)
++{
++	return shadow_cacr;
++}
+--- /dev/null
++++ b/arch/m68k/coldfire/config.c
+@@ -0,0 +1,420 @@
++/*
++ *  linux/arch/m68k/coldifre/config.c
++ *
++ *  Matt Waddel Matt.Waddel@freescale.com
++ *  Copyright Freescale Semiconductor, Inc. 2007
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License, or
++ *  (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/string.h>
++#include <linux/kernel.h>
++#include <linux/console.h>
++#include <linux/bootmem.h>
++#include <linux/mm.h>
++#include <asm/bootinfo.h>
++#include <asm/machdep.h>
++#include <asm/coldfire.h>
++#include <asm/cfcache.h>
++#include <asm/bootinfo.h>
++#include <asm/io.h>
++#include <asm/cfmmu.h>
++#include <asm/setup.h>
++#include <asm/irq.h>
++#include <asm/traps.h>
++#include <asm/movs.h>
++#include <asm/movs.h>
++#include <asm/page.h>
++#include <asm/pgalloc.h>
++#include <asm/mcf5445x_intc.h>
++#include <asm/mcf5445x_sdramc.h>
++#include <asm/mcf5445x_fbcs.h>
++#include <asm/mcf5445x_dtim.h>
++
++/* JKM -- testing */
++#include <linux/pfn.h>
++/* JKM */
++
++extern int get_irq_list(struct seq_file *p, void *v);
++extern char _text, _end;
++extern char _etext, _edata, __init_begin, __init_end;
++extern struct console mcfrs_console;
++extern char m68k_command_line[CL_SIZE];
++extern unsigned long availmem;
++
++static int irq_enable[NR_IRQS];
++unsigned long num_pages;
++
++void coldfire_sort_memrec(void)
++{
++	int i, j;
++
++	/* Sort the m68k_memory records by address */
++	for (i = 0; i < m68k_num_memory; ++i) {
++		for (j = i + 1; j < m68k_num_memory; ++j) {
++			if (m68k_memory[i].addr > m68k_memory[j].addr) {
++				struct mem_info tmp;
++				tmp = m68k_memory[i];
++				m68k_memory[i] = m68k_memory[j];
++				m68k_memory[j] = tmp;
++			}
++		}
++	}
++	/* Trim off discontiguous bits */
++	for (i = 1; i < m68k_num_memory; ++i) {
++		if ((m68k_memory[i-1].addr + m68k_memory[i-1].size) !=
++			m68k_memory[i].addr) {
++			printk(KERN_DEBUG "m68k_parse_bootinfo: addr gap between \
++				0x%lx & 0x%lx\n",
++				m68k_memory[i-1].addr+m68k_memory[i-1].size,
++				m68k_memory[i].addr);
++			m68k_num_memory = i;
++			break;
++		}
++	}
++}
++
++int __init uboot_commandline(char *bootargs)
++{
++	int len = 0, cmd_line_len;
++	static struct uboot_record uboot_info;
++
++	extern unsigned long uboot_info_stk;
++
++	/* Add 0x80000000 to get post-remapped kernel memory location */
++	uboot_info.bd_info = (*(u32 *)(uboot_info_stk)) + 0x80000000;
++	uboot_info.initrd_start = (*(u32 *)(uboot_info_stk+4)) + 0x80000000;
++	uboot_info.initrd_end = (*(u32 *)(uboot_info_stk+8)) + 0x80000000;
++	uboot_info.cmd_line_start = (*(u32 *)(uboot_info_stk+12)) + 0x80000000;
++	uboot_info.cmd_line_stop = (*(u32 *)(uboot_info_stk+16)) + 0x80000000;
++
++	cmd_line_len = uboot_info.cmd_line_stop - uboot_info.cmd_line_start;
++	if ((cmd_line_len > 0) && (cmd_line_len < CL_SIZE-1))
++		len = (int)strncpy(bootargs, (char *)uboot_info.cmd_line_start,\
++				   cmd_line_len);
++
++	return len;
++}
++
++/*
++ * This routine does things not done in the bootloader.
++ */
++#define DEFAULT_COMMAND_LINE "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
++asmlinkage void __init cf_early_init(void)
++{
++	struct bi_record *record = (struct bi_record *) &_end;
++
++	extern char _end;
++
++	SET_VBR((void *)MCF_RAMBAR1);
++
++	/* Mask all interrupts */
++	MCF_INTC0_IMRL = 0xFFFFFFFF;
++	MCF_INTC0_IMRH = 0xFFFFFFFF;
++	MCF_INTC1_IMRL = 0xFFFFFFFF;
++	MCF_INTC1_IMRH = 0xFFFFFFFF;
++
++#if defined(CONFIG_NOR_FLASH_BASE)
++	MCF_FBCS_CSAR(1) = CONFIG_NOR_FLASH_BASE;
++#else
++	MCF_FBCS_CSAR(1) = 0x00000000;
++#endif
++
++#if CONFIG_SDRAM_SIZE > (256*1024*1024)
++	/* Init optional SDRAM chip select */
++	MCF_SDRAMC_SDCS(1) = (256*1024*1024) | 0x1B;
++#endif
++
++	m68k_machtype = MACH_CFMMU;
++	m68k_fputype = FPU_CFV4E;
++	m68k_mmutype = MMU_CFV4E;
++	m68k_cputype = CPU_CFV4E;
++
++	m68k_num_memory = 0;
++	m68k_memory[m68k_num_memory].addr = CONFIG_SDRAM_BASE;
++	m68k_memory[m68k_num_memory++].size = CONFIG_SDRAM_SIZE;
++
++	if (!uboot_commandline(m68k_command_line)) {
++#if defined(CONFIG_BOOTPARAM)
++		strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE-1);
++#else
++		strcpy(m68k_command_line, DEFAULT_COMMAND_LINE);
++#endif
++	}
++
++
++#if defined(CONFIG_BLK_DEV_INITRD)
++	/* add initrd image */
++	record = (struct bi_record *) ((void *)record + record->size);
++	record->tag = BI_RAMDISK;
++	record->size =  sizeof(record->tag) + sizeof(record->size)
++		+ sizeof(record->data[0]) + sizeof(record->data[1]);
++#endif
++
++	/* Mark end of tags. */
++	record = (struct bi_record *) ((void *) record + record->size);
++	record->tag = 0;
++	record->data[0] = 0;
++	record->data[1] = 0;
++	record->size = sizeof(record->tag) + sizeof(record->size)
++		+ sizeof(record->data[0]) + sizeof(record->data[1]);
++
++	/* Invalidate caches via CACR */
++	cacr_set(CACHE_DISABLE_MODE);
++
++	/* Turn on caches via CACR, enable EUSP */
++	cacr_set(CACHE_INITIAL_MODE);
++}
++
++void settimericr(unsigned int timer, unsigned int level)
++{
++	volatile unsigned char *icrp;
++	unsigned int icr;
++	unsigned char irq;
++
++	if (timer <= 2) {
++		switch (timer) {
++		case 2:  irq = 33; icr = MCFSIM_ICR_TIMER2; break;
++		default: irq = 32; icr = MCFSIM_ICR_TIMER1; break;
++		}
++
++		icrp = (volatile unsigned char *) (icr);
++		*icrp = level;
++		coldfire_enable_irq0(irq);
++	}
++}
++
++/* Assembler routines */
++asmlinkage void buserr(void);
++asmlinkage void trap(void);
++asmlinkage void system_call(void);
++asmlinkage void inthandler(void);
++
++void __init coldfire_trap_init(void)
++{
++	int i = 0;
++	e_vector *vectors;
++
++	vectors = (e_vector *)MCF_RAMBAR1;
++	/*
++	 * There is a common trap handler and common interrupt
++	 * handler that handle almost every vector. We treat
++	 * the system call and bus error special, they get their
++	 * own first level handlers.
++	 */
++	for (i = 3; (i <= 23); i++)
++		vectors[i] = trap;
++	for (i = 33; (i <= 63); i++)
++		vectors[i] = trap;
++	for (i = 24; (i <= 31); i++)
++		vectors[i] = inthandler;
++	for (i = 64; (i < 255); i++)
++		vectors[i] = inthandler;
++
++	vectors[255] = 0;
++	vectors[2] = buserr;
++	vectors[32] = system_call;
++}
++
++void coldfire_tick(void)
++{
++	/* Reset the ColdFire timer */
++	__raw_writeb(MCF_DTIM_DTER_CAP | MCF_DTIM_DTER_REF, MCF_DTIM0_DTER);
++}
++
++void __init coldfire_sched_init(irq_handler_t handler)
++{
++	unsigned int	mcf_timerlevel = 5;
++	unsigned int	mcf_timervector = 64+32;
++
++	__raw_writew(MCF_DTIM_DTMR_RST_RST, MCF_DTIM0_DTMR);
++	__raw_writel(((MCF_BUSCLK / 16) / HZ), MCF_DTIM0_DTRR);
++	__raw_writew(MCF_DTIM_DTMR_ORRI	| MCF_DTIM_DTMR_CLK_DIV16 |
++		     MCF_DTIM_DTMR_FRR	| MCF_DTIM_DTMR_RST_EN, \
++		     MCF_DTIM0_DTMR);
++
++	request_irq(mcf_timervector, handler, SA_INTERRUPT, \
++		    "timer", (void *)MCF_DTIM0_DTMR);
++
++	settimericr(1, mcf_timerlevel);
++}
++
++int timerirqpending(int timer)
++{
++	unsigned int imr = 0;
++
++	switch (timer) {
++	case 1:  imr = 0x1; break;
++	case 2:  imr = 0x2; break;
++	default: break;
++	}
++
++	return (getiprh() & imr);
++}
++
++unsigned long coldfire_gettimeoffset(void)
++{
++	volatile unsigned long trr, tcn, offset;
++
++	tcn = __raw_readw(MCF_DTIM0_DTCN);
++	trr = __raw_readl(MCF_DTIM0_DTRR);
++	offset = (tcn * (1000000 / HZ)) / trr;
++
++	/* Check if we just wrapped the counters and maybe missed a tick */
++	if ((offset < (1000000 / HZ / 2)) && timerirqpending(1))
++		offset += 1000000 / HZ;
++	return offset;
++}
++
++void coldfire_reboot(void)
++{
++	/* disable interrupts and do a software reset */
++	asm("movew #0x2700, %%sr\n\t"
++	    "moveb #0x80, %%d0\n\t"
++	    "moveb %%d0, 0xfc0a0000\n\t"
++	    : : : "%d0");
++}
++
++/* int coldfire_hwclk(int i, struct rtc_time *t)
++{
++	printk ("Real time clock needs porting.\n");
++	return 0;
++}*/
++
++static void coldfire_get_model(char *model)
++{
++	sprintf(model, "Version 4 ColdFire");
++}
++
++void coldfire_enable_irq(unsigned int vec)
++{
++	unsigned long flags;
++
++	vec -= 64;
++
++	if (((int)vec < 0) || (vec > 63)) {
++		printk(KERN_WARNING "enable_irq %d failed\n", vec);
++		return;
++	}
++
++	local_irq_save(flags);
++	irq_enable[vec]++;
++	if (vec < 32)
++		MCF_INTC0_IMRL &= ~(1 << vec);
++	else
++		MCF_INTC0_IMRH &= ~(1 << (vec - 32));
++	local_irq_restore(flags);
++}
++
++void coldfire_disable_irq(unsigned int vec)
++{
++	unsigned long flags;
++
++	vec -= 64;
++
++	if (((int)vec < 0) || (vec > 63)) {
++		printk(KERN_WARNING "disable_irq %d failed\n", vec);
++		return;
++	}
++
++	local_irq_save(flags);
++	if (--irq_enable[vec] == 0) {
++		if (vec < 32)
++			MCF_INTC0_IMRL |= (1 << vec);
++		else
++			MCF_INTC0_IMRH |= (1 << (vec - 32));
++
++	}
++	local_irq_restore(flags);
++}
++
++static void __init
++coldfire_bootmem_alloc(unsigned long memory_start, unsigned long memory_end)
++{
++	unsigned long base_pfn;
++
++	/* compute total pages in system */
++	num_pages = PAGE_ALIGN(memory_end - PAGE_OFFSET) >> PAGE_SHIFT;
++
++	/* align start/end to page boundries */
++	memory_start = PAGE_ALIGN(memory_start);
++	memory_end = memory_end & PAGE_MASK;
++
++	/* page numbers */
++	base_pfn = __pa(PAGE_OFFSET) >> PAGE_SHIFT;
++	min_low_pfn = __pa(memory_start) >> PAGE_SHIFT;
++	max_low_pfn = __pa(memory_end) >> PAGE_SHIFT;
++
++	high_memory = (void *)memory_end;
++	availmem = memory_start;
++
++	/* setup bootmem data */
++	m68k_setup_node(0);
++	availmem += init_bootmem_node(NODE_DATA(0), min_low_pfn,
++		base_pfn, max_low_pfn);
++	availmem = PAGE_ALIGN(availmem);
++	free_bootmem(__pa(availmem), memory_end - (availmem));
++}
++
++void __init config_coldfire(void)
++{
++	unsigned long endmem, startmem;
++	int i;
++
++	/*
++	 * Calculate endmem from m68k_memory, assume all are contiguous
++	 */
++	startmem = ((((int) &_end) + (PAGE_SIZE - 1)) & PAGE_MASK);
++	endmem = PAGE_OFFSET;
++	for (i = 0; i < m68k_num_memory; ++i)
++		endmem += m68k_memory[i].size;
++
++	printk(KERN_INFO "starting up linux startmem 0x%lx, endmem 0x%lx, \
++		size %luMB\n", startmem,  endmem, (endmem - startmem) >> 20);
++
++	memset(irq_enable, 0, sizeof(irq_enable));
++
++	/*
++	 * Setup coldfire mach-specific handlers
++	 */
++	mach_max_dma_address 	= 0xffffffff;
++	mach_sched_init 	= coldfire_sched_init;
++	mach_tick		= coldfire_tick;
++	mach_gettimeoffset 	= coldfire_gettimeoffset;
++	mach_reset 		= coldfire_reboot;
++/*	mach_hwclk 		= coldfire_hwclk; to be done */
++	mach_get_model 		= coldfire_get_model;
++
++	coldfire_bootmem_alloc(startmem, endmem);
++
++	/*
++	 * initrd setup
++	 */
++/* #ifdef CONFIG_BLK_DEV_INITRD
++	if (m68k_ramdisk.size)  {
++		reserve_bootmem (__pa(m68k_ramdisk.addr), m68k_ramdisk.size);
++		initrd_start = (unsigned long) m68k_ramdisk.addr;
++		initrd_end = initrd_start + m68k_ramdisk.size;
++		printk (KERN_DEBUG "initrd: %08lx - %08lx\n", initrd_start,
++			initrd_end);
++	}
++#endif */
++
++#if defined(CONFIG_DUMMY_CONSOLE) || defined(CONFIG_FRAMEBUFFER_CONSOLE)
++	conswitchp = &dummy_con;
++#endif
++
++#if defined(CONFIG_SERIAL_COLDFIRE)
++	/*
++	 * This causes trouble when it is re-registered later.
++	 * Currently this is fixed by conditionally commenting
++	 * out the register_console in mcf_serial.c
++	 */
++	register_console(&mcfrs_console);
++#endif
++}
+--- /dev/null
++++ b/arch/m68k/coldfire/entry.S
+@@ -0,0 +1,701 @@
++/*
++ *  arch/m68k/coldfire/entry.S
++ *
++ *  Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
++ *  Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
++ *                      Kenneth Albanowski <kjahds@kjahds.com>,
++ *  Copyright (C) 2000  Lineo Inc. (www.lineo.com)
++ *  Copyright (C) 2004-2006  Macq Electronique SA. (www.macqel.com)
++ *  Matt Waddel Matt.Waddel@freescale.com
++ *  Kurt Mahan kmahan@freescale.com
++ *  Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * Based on:
++ *
++ *  arch/m68knommu/platform/5307/entry.S &
++ *  arch/m68k/kernel/entry.S
++ *
++ *  Copyright (C) 1991, 1992  Linus Torvalds
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file README.legal in the main directory of this archive
++ * for more details.
++ *
++ * Linux/m68k support by Hamish Macdonald
++ *
++ * ColdFire support by Greg Ungerer (gerg@snapgear.com)
++ * 5307 fixes by David W. Miller
++ * linux 2.4 support David McCullough <davidm@snapgear.com>
++ * Bug, speed and maintainability fixes by Philippe De Muyter <phdm@macqel.be>
++ * Ported to mmu Coldfire by Matt Waddel
++ */
++
++#include <linux/sys.h>
++#include <linux/linkage.h>
++#include <asm/cf_entry.h>
++#include <asm/errno.h>
++#include <asm/setup.h>
++#include <asm/segment.h>
++#include <asm/traps.h>
++#include <asm/unistd.h>
++
++/*
++ * TASK_INFO:
++ *
++ *  - TINFO_PREEMPT (struct thread_info / preempt_count)
++ *      Used to keep track of preemptability
++ *  - TINFO_FLAGS (struct thread_info / flags - include/asm-m68k/thread_info.h)
++ *      Various bit flags that are checked for scheduling/tracing
++ *	Bits 0-7  are checked every exception exit
++ *	     8-15 are checked every syscall exit
++ *
++ *      TIF_SIGPENDING		6
++ *      TIF_NEED_RESCHED	7
++ *      TIF_DELAYED_TRACE	14
++ *      TIF_SYSCALL_TRACE	15
++ *      TIF_MEMDIE		16 (never checked here)
++ */
++
++.bss
++
++sw_ksp:
++.long	0
++
++sw_usp:
++.long	0
++
++.text
++
++.globl system_call
++.globl buserr
++.globl trap
++.globl resume
++.globl ret_from_exception
++.globl ret_from_signal
++.globl sys_call_table
++.globl ret_from_interrupt
++.globl inthandler
++
++ENTRY(buserr)
++	SAVE_ALL_INT
++	GET_CURRENT(%d0)
++	movel   %sp,%sp@-		/* stack frame pointer argument */
++	jsr     buserr_c
++	addql   #4,%sp
++	jra     .Lret_from_exception
++
++ENTRY(trap)
++	SAVE_ALL_INT
++	GET_CURRENT(%d0)
++	movel   %sp,%sp@-		/* stack frame pointer argument */
++	jsr     trap_c
++	addql   #4,%sp
++	jra     .Lret_from_exception
++
++	/* After a fork we jump here directly from resume,
++	   %d1 contains the previous task schedule_tail */
++ENTRY(ret_from_fork)
++	movel   %d1,%sp@-
++	jsr     schedule_tail
++	addql   #4,%sp
++	jra     .Lret_from_exception
++
++do_trace_entry:
++	movel	#-ENOSYS,%d1		/* needed for strace */
++	movel	%d1,%sp@(PT_D0)
++	subql	#4,%sp
++	SAVE_SWITCH_STACK
++	jbsr	syscall_trace
++	RESTORE_SWITCH_STACK
++	addql	#4,%sp
++	movel	%sp@(PT_ORIG_D0),%d0
++	cmpl	#NR_syscalls,%d0
++	jcs	syscall
++badsys:
++	movel	#-ENOSYS,%d1
++	movel	%d1,%sp@(PT_D0)
++	jra	ret_from_exception
++
++do_trace_exit:
++	subql	#4,%sp
++	SAVE_SWITCH_STACK
++	jbsr	syscall_trace
++	RESTORE_SWITCH_STACK
++	addql	#4,%sp
++	jra	.Lret_from_exception
++
++ENTRY(ret_from_signal)
++	RESTORE_SWITCH_STACK
++	addql	#4,%sp
++	jra	.Lret_from_exception
++
++ENTRY(system_call)
++	SAVE_ALL_SYS
++
++	GET_CURRENT(%d1)
++	/* save top of frame */
++	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
++
++	/* syscall trace */
++	tstb	%curptr@(TASK_INFO+TINFO_FLAGS+2)
++	jmi	do_trace_entry		/* SYSCALL_TRACE is set */
++	cmpl	#NR_syscalls,%d0
++	jcc	badsys
++syscall:
++	movel	#sys_call_table,%a0
++	asll	#2,%d0
++	addl	%d0,%a0
++	movel	%a0@,%a0
++	jsr	%a0@
++	movel	%d0,%sp@(PT_D0)		/* save the return value */
++ret_from_syscall:
++	movew	%curptr@(TASK_INFO+TINFO_FLAGS+2),%d0
++	jne	syscall_exit_work	/* flags set so process */
++1:	RESTORE_ALL
++
++syscall_exit_work:
++	btst	#5,%sp@(PT_SR)		/* check if returning to kernel */
++	bnes	1b			/* if so, skip resched, signals */
++
++	btstl	#15,%d0			/* check if SYSCALL_TRACE */
++	jne	do_trace_exit
++	btstl	#14,%d0			/* check if DELAYED_TRACE */
++	jne	do_delayed_trace
++	btstl	#6,%d0			/* check if SIGPENDING */
++	jne	do_signal_return
++	pea	resume_userspace
++	jra	schedule
++
++ENTRY(ret_from_exception)
++.Lret_from_exception:
++	btst	#5,%sp@(PT_SR)		/* check if returning to kernel */
++	bnes	1f			/* if so, skip resched, signals */
++	movel	%d0,%sp@-		/* Only allow interrupts when we are  */
++	move	%sr,%d0			/* last one on the kernel stack,      */
++	andl	#ALLOWINT,%d0		/* otherwise stack overflow can occur */
++	move	%d0,%sr			/* during heavy interrupt load.       */
++	movel	%sp@+,%d0
++
++resume_userspace:
++	moveb	%curptr@(TASK_INFO+TINFO_FLAGS+3),%d0
++	jne	exit_work	/* SIGPENDING and/or NEED_RESCHED set */
++1:	RESTORE_ALL
++
++exit_work:
++	/* save top of frame */
++	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
++	btstl	#6,%d0			/* check for SIGPENDING in flags */
++	jne	do_signal_return
++	pea	resume_userspace
++	jra	schedule
++
++do_signal_return:
++	subql	#4,%sp			/* dummy return address */
++	SAVE_SWITCH_STACK
++	pea	%sp@(SWITCH_STACK_SIZE)
++	clrl	%sp@-
++	bsrl	do_signal
++	addql	#8,%sp
++	RESTORE_SWITCH_STACK
++	addql	#4,%sp
++	jbra	resume_userspace
++
++do_delayed_trace:
++	bclr	#7,%sp@(PT_SR)		/* clear trace bit in SR */
++	pea	1			/* send SIGTRAP */
++	movel	%curptr,%sp@-
++	pea	LSIGTRAP
++	jbsr	send_sig
++	addql	#8,%sp
++	addql	#4,%sp
++	jbra	resume_userspace
++
++/*
++ * This is the interrupt handler (for all hardware interrupt
++ * sources). It figures out the vector number and calls the appropriate
++ * interrupt service routine directly.
++ */
++ENTRY(inthandler)
++	SAVE_ALL_INT
++	GET_CURRENT(%d0)
++	addql	#1,%curptr@(TASK_INFO+TINFO_PREEMPT)
++	/* put exception # in d0 */
++	movel	%sp@(PT_VECTOR),%d0
++	swap	%d0			/* extract bits 25:18 */
++	lsrl	#2,%d0
++	andl	#0x0ff,%d0
++
++	movel	%sp,%sp@-
++	movel	%d0,%sp@-		/* put vector # on stack */
++auto_irqhandler_fixup = . + 2
++	jbsr	process_int		/* process the IRQ */
++	addql	#8,%sp			/* pop parameters off stack */
++
++ENTRY(ret_from_interrupt)
++ret_from_interrupt:
++
++	subql	#1,%curptr@(TASK_INFO+TINFO_PREEMPT)
++	jeq	ret_from_last_interrupt
++2:	RESTORE_ALL
++
++	ALIGN
++ret_from_last_interrupt:
++	moveb	%sp@(PT_SR),%d0
++	andl	#(~ALLOWINT>>8)&0xff,%d0
++	jne	2b
++
++	/* check if we need to do software interrupts */
++	tstl	irq_stat+CPUSTAT_SOFTIRQ_PENDING
++	jeq	.Lret_from_exception
++	pea	ret_from_exception
++	jra	do_softirq
++
++ENTRY(user_inthandler)
++	SAVE_ALL_INT
++	GET_CURRENT(%d0)
++	addql	#1,%curptr@(TASK_INFO+TINFO_PREEMPT)
++	/* put exception # in d0 */
++	movel	%sp@(PT_VECTOR),%d0
++user_irqvec_fixup = . + 2
++	swap	%d0			/* extract bits 25:18 */
++	lsrl	#2,%d0
++	andl	#0x0ff,%d0
++
++	movel	%sp,%sp@-
++	movel	%d0,%sp@-		/* put vector # on stack */
++user_irqhandler_fixup = . + 2
++	jbsr	process_int		/* process the IRQ */
++	addql	#8,%sp			/* pop parameters off stack */
++
++	subql	#1,%curptr@(TASK_INFO+TINFO_PREEMPT)
++	jeq	ret_from_last_interrupt
++        RESTORE_ALL
++
++/* Handler for uninitialized and spurious interrupts */
++
++ENTRY(bad_inthandler)
++	SAVE_ALL_INT
++	GET_CURRENT(%d0)
++	addql	#1,%curptr@(TASK_INFO+TINFO_PREEMPT)
++
++	movel	%sp,%sp@-
++	jsr	handle_badint
++	addql	#4,%sp
++
++	subql	#1,%curptr@(TASK_INFO+TINFO_PREEMPT)
++	jeq	ret_from_last_interrupt
++	RESTORE_ALL
++
++ENTRY(sys_fork)
++	SAVE_SWITCH_STACK
++	pea	%sp@(SWITCH_STACK_SIZE)
++	jbsr	m68k_fork
++	addql	#4,%sp
++	RESTORE_SWITCH_STACK
++	rts
++
++ENTRY(sys_clone)
++	SAVE_SWITCH_STACK
++	pea	%sp@(SWITCH_STACK_SIZE)
++	jbsr	m68k_clone
++	addql	#4,%sp
++	RESTORE_SWITCH_STACK
++	rts
++
++ENTRY(sys_vfork)
++	SAVE_SWITCH_STACK
++	pea	%sp@(SWITCH_STACK_SIZE)
++	jbsr	m68k_vfork
++	addql	#4,%sp
++	RESTORE_SWITCH_STACK
++	rts
++
++ENTRY(sys_sigsuspend)
++	SAVE_SWITCH_STACK
++	pea	%sp@(SWITCH_STACK_SIZE)
++	jbsr	do_sigsuspend
++	addql	#4,%sp
++	RESTORE_SWITCH_STACK
++	rts
++
++ENTRY(sys_rt_sigsuspend)
++	SAVE_SWITCH_STACK
++	pea	%sp@(SWITCH_STACK_SIZE)
++	jbsr	do_rt_sigsuspend
++	addql	#4,%sp
++	RESTORE_SWITCH_STACK
++	rts
++
++ENTRY(sys_sigreturn)
++	SAVE_SWITCH_STACK
++	jbsr	do_sigreturn
++	RESTORE_SWITCH_STACK
++	rts
++
++ENTRY(sys_rt_sigreturn)
++	SAVE_SWITCH_STACK
++	jbsr	do_rt_sigreturn
++	RESTORE_SWITCH_STACK
++	rts
++
++resume:
++	/*
++	 * Beware - when entering resume, prev (the current task) is
++	 * in a0, next (the new task) is in a1,so don't change these
++	 * registers until their contents are no longer needed.
++	 */
++
++	/* save sr */
++	movew	%sr,%d0
++	movew	%d0,%a0@(TASK_THREAD+THREAD_SR)
++
++	/* save usp */
++	/* Save USP via %a1 (which is saved/restored from %d0) */
++	movel   %a1,%d0
++	movel   %usp,%a1
++	movel   %a1,%a0@(TASK_THREAD+THREAD_USP)
++	movel   %d0,%a1
++
++	/* save non-scratch registers on stack */
++	SAVE_SWITCH_STACK
++
++	/* save current kernel stack pointer */
++	movel	%sp,%a0@(TASK_THREAD+THREAD_KSP)
++
++	/* Return previous task in %d1 */
++	movel	%curptr,%d1
++
++	/* switch to new task (a1 contains new task) */
++	movel	%a1,%curptr
++
++	/* restore the kernel stack pointer */
++	movel	%a1@(TASK_THREAD+THREAD_KSP),%sp
++
++	/* restore non-scratch registers */
++	RESTORE_SWITCH_STACK
++
++	/* restore user stack pointer */
++	movel	%a1@(TASK_THREAD+THREAD_USP),%a0
++	movel	%a0,%usp
++
++	/* restore status register */
++	movew	%a1@(TASK_THREAD+THREAD_SR),%d0
++	movew	%d0,%sr
++
++	rts
++
++.data
++ALIGN
++sys_call_table:
++	.long sys_ni_syscall	/* 0  -  old "setup()" system call*/
++	.long sys_exit
++	.long sys_fork
++	.long sys_read
++	.long sys_write
++	.long sys_open		/* 5 */
++	.long sys_close
++	.long sys_waitpid
++	.long sys_creat
++	.long sys_link
++	.long sys_unlink	/* 10 */
++	.long sys_execve
++	.long sys_chdir
++	.long sys_time
++	.long sys_mknod
++	.long sys_chmod		/* 15 */
++	.long sys_chown16
++	.long sys_ni_syscall			/* old break syscall holder */
++	.long sys_stat
++	.long sys_lseek
++	.long sys_getpid	/* 20 */
++	.long sys_mount
++	.long sys_oldumount
++	.long sys_setuid16
++	.long sys_getuid16
++	.long sys_stime		/* 25 */
++	.long sys_ptrace
++	.long sys_alarm
++	.long sys_fstat
++	.long sys_pause
++	.long sys_utime		/* 30 */
++	.long sys_ni_syscall			/* old stty syscall holder */
++	.long sys_ni_syscall			/* old gtty syscall holder */
++	.long sys_access
++	.long sys_nice
++	.long sys_ni_syscall	/* 35 */	/* old ftime syscall holder */
++	.long sys_sync
++	.long sys_kill
++	.long sys_rename
++	.long sys_mkdir
++	.long sys_rmdir		/* 40 */
++	.long sys_dup
++	.long sys_pipe
++	.long sys_times
++	.long sys_ni_syscall			/* old prof syscall holder */
++	.long sys_brk		/* 45 */
++	.long sys_setgid16
++	.long sys_getgid16
++	.long sys_signal
++	.long sys_geteuid16
++	.long sys_getegid16	/* 50 */
++	.long sys_acct
++	.long sys_umount			/* recycled never used phys() */
++	.long sys_ni_syscall			/* old lock syscall holder */
++	.long sys_ioctl
++	.long sys_fcntl		/* 55 */
++	.long sys_ni_syscall			/* old mpx syscall holder */
++	.long sys_setpgid
++	.long sys_ni_syscall			/* old ulimit syscall holder */
++	.long sys_ni_syscall
++	.long sys_umask		/* 60 */
++	.long sys_chroot
++	.long sys_ustat
++	.long sys_dup2
++	.long sys_getppid
++	.long sys_getpgrp	/* 65 */
++	.long sys_setsid
++	.long sys_sigaction
++	.long sys_sgetmask
++	.long sys_ssetmask
++	.long sys_setreuid16	/* 70 */
++	.long sys_setregid16
++	.long sys_sigsuspend
++	.long sys_sigpending
++	.long sys_sethostname
++	.long sys_setrlimit	/* 75 */
++	.long sys_old_getrlimit
++	.long sys_getrusage
++	.long sys_gettimeofday
++	.long sys_settimeofday
++	.long sys_getgroups16	/* 80 */
++	.long sys_setgroups16
++	.long old_select
++	.long sys_symlink
++	.long sys_lstat
++	.long sys_readlink	/* 85 */
++	.long sys_uselib
++	.long sys_swapon
++	.long sys_reboot
++	.long old_readdir
++	.long old_mmap		/* 90 */
++	.long sys_munmap
++	.long sys_truncate
++	.long sys_ftruncate
++	.long sys_fchmod
++	.long sys_fchown16	/* 95 */
++	.long sys_getpriority
++	.long sys_setpriority
++	.long sys_ni_syscall			/* old profil syscall holder */
++	.long sys_statfs
++	.long sys_fstatfs	/* 100 */
++	.long sys_ni_syscall			/* ioperm for i386 */
++	.long sys_socketcall
++	.long sys_syslog
++	.long sys_setitimer
++	.long sys_getitimer	/* 105 */
++	.long sys_newstat
++	.long sys_newlstat
++	.long sys_newfstat
++	.long sys_ni_syscall
++	.long sys_ni_syscall	/* 110 */	/* iopl for i386 */
++	.long sys_vhangup
++	.long sys_ni_syscall			/* obsolete idle() syscall */
++	.long sys_ni_syscall			/* vm86old for i386 */
++	.long sys_wait4
++	.long sys_swapoff	/* 115 */
++	.long sys_sysinfo
++	.long sys_ipc
++	.long sys_fsync
++	.long sys_sigreturn
++	.long sys_clone		/* 120 */
++	.long sys_setdomainname
++	.long sys_newuname
++	.long sys_cacheflush			/* modify_ldt for i386 */
++	.long sys_adjtimex
++	.long sys_mprotect	/* 125 */
++	.long sys_sigprocmask
++	.long sys_ni_syscall			/* old "create_module" */
++	.long sys_init_module
++	.long sys_delete_module
++	.long sys_ni_syscall	/* 130 - old "get_kernel_syms" */
++	.long sys_quotactl
++	.long sys_getpgid
++	.long sys_fchdir
++	.long sys_bdflush
++	.long sys_sysfs		/* 135 */
++	.long sys_personality
++	.long sys_ni_syscall			/* for afs_syscall */
++	.long sys_setfsuid16
++	.long sys_setfsgid16
++	.long sys_llseek	/* 140 */
++	.long sys_getdents
++	.long sys_select
++	.long sys_flock
++	.long sys_msync
++	.long sys_readv		/* 145 */
++	.long sys_writev
++	.long sys_getsid
++	.long sys_fdatasync
++	.long sys_sysctl
++	.long sys_mlock		/* 150 */
++	.long sys_munlock
++	.long sys_mlockall
++	.long sys_munlockall
++	.long sys_sched_setparam
++	.long sys_sched_getparam	/* 155 */
++	.long sys_sched_setscheduler
++	.long sys_sched_getscheduler
++	.long sys_sched_yield
++	.long sys_sched_get_priority_max
++	.long sys_sched_get_priority_min  /* 160 */
++	.long sys_sched_rr_get_interval
++	.long sys_nanosleep
++	.long sys_mremap
++	.long sys_setresuid16
++	.long sys_getresuid16	/* 165 */
++	.long sys_getpagesize
++	.long sys_ni_syscall			/* old sys_query_module */
++	.long sys_poll
++	.long sys_nfsservctl
++	.long sys_setresgid16	/* 170 */
++	.long sys_getresgid16
++	.long sys_prctl
++	.long sys_rt_sigreturn
++	.long sys_rt_sigaction
++	.long sys_rt_sigprocmask	/* 175 */
++	.long sys_rt_sigpending
++	.long sys_rt_sigtimedwait
++	.long sys_rt_sigqueueinfo
++	.long sys_rt_sigsuspend
++	.long sys_pread64	/* 180 */
++	.long sys_pwrite64
++	.long sys_lchown16;
++	.long sys_getcwd
++	.long sys_capget
++	.long sys_capset	/* 185 */
++	.long sys_sigaltstack
++	.long sys_sendfile
++	.long sys_ni_syscall			/* streams1 */
++	.long sys_ni_syscall			/* streams2 */
++	.long sys_vfork		/* 190 */
++	.long sys_getrlimit
++	.long sys_mmap2
++	.long sys_truncate64
++	.long sys_ftruncate64
++	.long sys_stat64	/* 195 */
++	.long sys_lstat64
++	.long sys_fstat64
++	.long sys_chown
++	.long sys_getuid
++	.long sys_getgid	/* 200 */
++	.long sys_geteuid
++	.long sys_getegid
++	.long sys_setreuid
++	.long sys_setregid
++	.long sys_getgroups	/* 205 */
++	.long sys_setgroups
++	.long sys_fchown
++	.long sys_setresuid
++	.long sys_getresuid
++	.long sys_setresgid	/* 210 */
++	.long sys_getresgid
++	.long sys_lchown
++	.long sys_setuid
++	.long sys_setgid
++	.long sys_setfsuid	/* 215 */
++	.long sys_setfsgid
++	.long sys_pivot_root
++	.long sys_ni_syscall
++	.long sys_ni_syscall
++	.long sys_getdents64	/* 220 */
++	.long sys_gettid
++	.long sys_tkill
++	.long sys_setxattr
++	.long sys_lsetxattr
++	.long sys_fsetxattr	/* 225 */
++	.long sys_getxattr
++	.long sys_lgetxattr
++	.long sys_fgetxattr
++	.long sys_listxattr
++	.long sys_llistxattr	/* 230 */
++	.long sys_flistxattr
++	.long sys_removexattr
++	.long sys_lremovexattr
++	.long sys_fremovexattr
++	.long sys_futex		/* 235 */
++	.long sys_sendfile64
++	.long sys_mincore
++	.long sys_madvise
++	.long sys_fcntl64
++	.long sys_readahead	/* 240 */
++	.long sys_io_setup
++	.long sys_io_destroy
++	.long sys_io_getevents
++	.long sys_io_submit
++	.long sys_io_cancel	/* 245 */
++	.long sys_fadvise64
++	.long sys_exit_group
++	.long sys_lookup_dcookie
++	.long sys_epoll_create
++	.long sys_epoll_ctl	/* 250 */
++	.long sys_epoll_wait
++	.long sys_remap_file_pages
++	.long sys_set_tid_address
++	.long sys_timer_create
++	.long sys_timer_settime	/* 255 */
++	.long sys_timer_gettime
++	.long sys_timer_getoverrun
++	.long sys_timer_delete
++	.long sys_clock_settime
++	.long sys_clock_gettime	/* 260 */
++	.long sys_clock_getres
++	.long sys_clock_nanosleep
++	.long sys_statfs64
++	.long sys_fstatfs64
++	.long sys_tgkill	/* 265 */
++	.long sys_utimes
++	.long sys_fadvise64_64
++	.long sys_mbind	
++	.long sys_get_mempolicy
++	.long sys_set_mempolicy	/* 270 */
++	.long sys_mq_open
++	.long sys_mq_unlink
++	.long sys_mq_timedsend
++	.long sys_mq_timedreceive
++	.long sys_mq_notify	/* 275 */
++	.long sys_mq_getsetattr
++	.long sys_waitid
++	.long sys_ni_syscall			/* for sys_vserver */
++	.long sys_add_key
++	.long sys_request_key	/* 280 */
++	.long sys_keyctl
++	.long sys_ioprio_set
++	.long sys_ioprio_get
++	.long sys_inotify_init
++	.long sys_inotify_add_watch	/* 285 */
++	.long sys_inotify_rm_watch
++	.long sys_migrate_pages
++	.long sys_openat
++	.long sys_mkdirat
++	.long sys_mknodat		/* 290 */
++	.long sys_fchownat
++	.long sys_futimesat
++	.long sys_fstatat64
++	.long sys_unlinkat
++	.long sys_renameat		/* 295 */
++	.long sys_linkat
++	.long sys_symlinkat
++	.long sys_readlinkat
++	.long sys_fchmodat
++	.long sys_faccessat		/* 300 */
++	.long sys_ni_syscall			/* Reserved for pselect6 */
++	.long sys_ni_syscall			/* Reserved for ppoll */
++	.long sys_unshare
++	.long sys_set_robust_list
++	.long sys_get_robust_list	/* 305 */
++	.long sys_splice
++	.long sys_sync_file_range
++	.long sys_tee
++	.long sys_vmsplice
++	.long sys_move_pages		/* 310 */
++
+--- /dev/null
++++ b/arch/m68k/coldfire/head.S
+@@ -0,0 +1,474 @@
++/*
++ *  head.S is the MMU enabled ColdFire specific initial boot code
++ *
++ *  Ported to ColdFire by
++ *  Matt Waddel Matt.Waddel@freescale.com
++ *  Kurt Mahan kmahan@freescale.com
++ *  Copyright Freescale Semiconductor, Inc. 2007
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License, or
++ *  (at your option) any later version.
++ *
++ *  Parts of this code came from arch/m68k/kernel/head.S
++ */
++#include <linux/linkage.h>
++#include <linux/init.h>
++#include <asm/bootinfo.h>
++#include <asm/setup.h>
++#include <asm/entry.h>
++#include <asm/pgtable.h>
++#include <asm/page.h>
++#include <asm/coldfire.h>
++#include <asm/mcfuart.h>
++#include <asm/cfcache.h>
++
++#define DEBUG
++
++.globl kernel_pg_dir
++.globl availmem
++.globl set_context
++.globl set_fpga
++
++#ifdef DEBUG
++/* When debugging use readable names for labels */
++#ifdef __STDC__
++#define L(name) .head.S.##name
++#else
++#define L(name) .head.S./**/name
++#endif
++#else
++#ifdef __STDC__
++#define L(name) .L##name
++#else
++#define L(name) .L/**/name
++#endif
++#endif
++
++/* The __INITDATA stuff is a no-op when ftrace or kgdb are turned on */
++#ifndef __INITDATA
++#define __INITDATA	.data
++#define __FINIT		.previous
++#endif
++
++/*
++ * Setup ACR mappings to provide the following memory map:
++ *   Data
++ *     0xA0000000 -> 0xAFFFFFFF [0] NO CACHE / PRECISE / SUPER ONLY
++ *     0xFC000000 -> 0xFCFFFFFF [1] NO CACHE / PRECISE / SUPER ONLY
++ *   Code
++ *     None currently (mapped via TLBs)
++ */
++
++#define ACR0_DEFAULT	#0xA00FA048   /* ACR0 default value */
++#define ACR1_DEFAULT	#0xFC00A040   /* ACR1 default value */
++#define ACR2_DEFAULT	#0x00000000   /* ACR2 default value */
++#define ACR3_DEFAULT	#0x00000000   /* ACR3 default value */
++
++/* ACR mapping for FPGA (maps 0) */
++#define ACR0_FPGA	#0x000FA048   /* ACR0 enable FPGA */
++
++/* Several macros to make the writing of subroutines easier:
++ * - func_start marks the beginning of the routine which setups the frame
++ *   register and saves the registers, it also defines another macro
++ *   to automatically restore the registers again.
++ * - func_return marks the end of the routine and simply calls the prepared
++ *   macro to restore registers and jump back to the caller.
++ * - func_define generates another macro to automatically put arguments
++ *   onto the stack call the subroutine and cleanup the stack again.
++ */
++
++.macro	load_symbol_address	symbol,register
++	movel	#\symbol,\register
++.endm
++	
++.macro	func_start	name,saveregs,savesize,stack=0
++L(\name):
++	linkw	%a6,#-\stack
++	subal	#(\savesize),%sp
++	moveml	\saveregs,%sp@
++.set	stackstart,-\stack
++
++.macro	func_return_\name
++	moveml	%sp@,\saveregs
++	addal	#(\savesize),%sp
++	unlk	%a6
++	rts
++.endm
++.endm
++
++.macro	func_return	name
++	func_return_\name
++.endm
++
++.macro	func_call	name
++	jbsr	L(\name)
++.endm
++
++.macro	move_stack	nr,arg1,arg2,arg3,arg4
++.if	\nr
++	move_stack	"(\nr-1)",\arg2,\arg3,\arg4
++	movel	\arg1,%sp@-
++.endif
++.endm
++
++.macro	func_define	name,nr=0
++.macro	\name	arg1,arg2,arg3,arg4
++	move_stack	\nr,\arg1,\arg2,\arg3,\arg4
++	func_call	\name
++.if	\nr
++	lea	%sp@(\nr*4),%sp
++.endif
++.endm
++.endm
++
++func_define	serial_putc,1
++
++.macro	putc	ch
++	pea	\ch
++	func_call	serial_putc
++	addql	#4,%sp
++.endm
++
++.macro	dputc	ch
++#ifdef DEBUG
++	putc	\ch
++#endif
++.endm
++
++func_define	putn,1
++
++.macro	dputn	nr
++#ifdef DEBUG
++	putn	\nr
++#endif
++.endm
++
++/*
++	mmu_map  -  creates a new TLB entry
++
++	virt_addr      Must be on proper boundary
++	phys_addr      Must be on proper boundary
++	itlb           MMUOR_ITLB if instruction TLB or 0
++	asid           address space ID
++	shared_global  MMUTR_SG if shared between different ASIDs or 0
++	size_code      MMUDR_SZ1M  1 MB
++	               MMUDR_SZ4K  4 KB
++	               MMUDR_SZ8K  8 KB
++	               MMUDR_SZ16M 16 MB
++	cache_mode     MMUDR_INC   instruction non-cacheable
++                       MMUDR_IC    instruction cacheable
++                       MMUDR_DWT   data writethrough
++	               MMUDR_DCB   data copyback
++	               MMUDR_DNCP  data non-cacheable, precise
++	               MMUDR_DNCIP data non-cacheable, imprecise
++	super_prot     MMUDR_SP if user mode generates exception or 0
++	readable       MMUDR_R if permits read access (data TLB) or 0
++	writable       MMUDR_W if permits write access (data TLB) or 0
++	executable     MMUDR_X if permits execute access (instruction TLB) or 0
++	locked         MMUDR_LK prevents TLB entry from being replaced or 0
++	temp_data_reg  a data register to use for temporary values
++*/
++.macro mmu_map	virt_addr,phys_addr,itlb,asid,shared_global,size_code,cache_mode,super_prot,readable,writable,executable,locked,temp_data_reg
++	/* Set up search of TLB. */
++	movel	#(\virt_addr+1), \temp_data_reg
++	movel	\temp_data_reg, MMUAR
++	/* Search.  */
++	movel	#(MMUOR_STLB + MMUOR_ADR +\itlb), \temp_data_reg
++	movew	\temp_data_reg, (MMUOR)
++	/* Set up tag value.  */
++	movel	#(\virt_addr + \asid + \shared_global + MMUTR_V), \temp_data_reg
++	movel	\temp_data_reg, MMUTR
++	/* Set up data value.  */
++	movel	#(\phys_addr + \size_code + \cache_mode + \super_prot + \readable + \writable + \executable + \locked), \temp_data_reg
++	movel	\temp_data_reg, MMUDR
++	/* Save it.  */
++	movel	#(MMUOR_ACC + MMUOR_UAA + \itlb), \temp_data_reg
++	movew	\temp_data_reg, (MMUOR)
++.endm	/* mmu_map */
++
++.macro mmu_unmap	virt_addr,itlb,temp_data_reg
++	/* Set up search of TLB. */
++	movel	#(\virt_addr+1), \temp_data_reg
++	movel	\temp_data_reg, MMUAR
++	/* Search.  */
++	movel	#(MMUOR_STLB + MMUOR_ADR +\itlb), \temp_data_reg
++	movew	\temp_data_reg, (MMUOR)
++	/* Test for hit.  */
++	movel	MMUSR,\temp_data_reg
++	btst	#MMUSR_HITN,\temp_data_reg
++	beq	1f
++	/* Read the TLB.  */
++	movel	#(MMUOR_RW + MMUOR_ACC +\itlb), \temp_data_reg
++	movew	\temp_data_reg, (MMUOR)
++	movel	MMUSR,\temp_data_reg
++	/* Set up tag value.  */
++	movel	#0, \temp_data_reg
++	movel	\temp_data_reg, MMUTR
++	/* Set up data value.  */
++	movel	#0, \temp_data_reg
++	movel	\temp_data_reg, MMUDR
++	/* Save it.  */
++	movel	#(MMUOR_ACC + MMUOR_UAA + \itlb), \temp_data_reg
++	movew	\temp_data_reg, (MMUOR)
++1:	
++.endm	/* mmu_unmap */
++
++/* .text */
++.section ".text.head","ax"
++ENTRY(_stext)
++/* Version numbers of the bootinfo interface -- if we later pass info
++ * from boot ROM we might want to put something real here.
++ *
++ * The area from _stext to _start will later be used as kernel pointer table
++ */
++	bras	1f	/* Jump over bootinfo version numbers */
++
++	.long	BOOTINFOV_MAGIC
++	.long	0
++1:	jmp	__start-0x80000000
++
++.equ	kernel_pg_dir,_stext
++.equ	.,_stext+0x1000
++
++ENTRY(_start)
++	jra	__start
++__INIT
++ENTRY(__start)
++
++/* Save the location of u-boot info - cmd line, bd_info, etc. */
++	movel	%a7,%a4		/* Don't use %a4 before cf_early_init */
++	addl	#0x80000004,%a4	/* 0x80000004= 1 stack push + high mem offset */
++
++/* Setup initial stack pointer */
++	movel	#0x40001000,%sp	
++
++/* Clear usp */
++	subl	%a0,%a0
++	movel	%a0,%usp
++
++	movel  #(MCF_RAMBAR1 + 0x221), %d0
++	movec   %d0, %rambar1
++	movew	#0x2700,%sr
++
++	movel	#(MMU_BASE+1),%d0
++	movecl	%d0,%mmubar
++	movel	#MMUOR_CA,%a0  			/* Clear tlb entries */
++	movew	%a0,(MMUOR)
++	movel	#(MMUOR_CA + MMUOR_ITLB),%a0 	/* Use ITLB for searches */
++	movew	%a0,(MMUOR)
++	movel	#0,%a0 				/* Clear Addr Space User ID */
++	movecl	%a0,%asid 
++
++/* setup ACRs */
++	movel	ACR0_DEFAULT, %d0  		/* ACR0 (DATA) setup */
++	movec   %d0, %acr0
++	movel	ACR1_DEFAULT, %d0  		/* ACR1 (DATA) setup */
++	movec   %d0, %acr1
++	movel	ACR2_DEFAULT, %d0  		/* ACR2 (CODE) setup */
++	movec   %d0, %acr2
++	movel	ACR3_DEFAULT, %d0  		/* ACR3 (CODE) setup */
++	movec   %d0, %acr3
++
++	/* If you change the memory size to another value make a matching 
++	   change in paging_init(cf-mmu.c) to zones_size[]. */
++
++	/* Map 256MB as code */
++	mmu_map	(PAGE_OFFSET+0*0x1000000),  (PHYS_OFFSET+0*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+1*0x1000000),  (PHYS_OFFSET+1*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+2*0x1000000),  (PHYS_OFFSET+2*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+3*0x1000000),  (PHYS_OFFSET+3*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+4*0x1000000),  (PHYS_OFFSET+4*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+5*0x1000000),  (PHYS_OFFSET+5*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+6*0x1000000),  (PHYS_OFFSET+6*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+7*0x1000000),  (PHYS_OFFSET+7*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+8*0x1000000),  (PHYS_OFFSET+8*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+9*0x1000000),  (PHYS_OFFSET+9*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+10*0x1000000), (PHYS_OFFSET+10*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+11*0x1000000), (PHYS_OFFSET+11*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+12*0x1000000), (PHYS_OFFSET+12*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+13*0x1000000), (PHYS_OFFSET+13*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+14*0x1000000), (PHYS_OFFSET+14*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+15*0x1000000), (PHYS_OFFSET+15*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
++		0, 0, MMUDR_X, MMUDR_LK, %d0
++
++	/* Map 256MB as data also */
++	mmu_map	(PAGE_OFFSET+0*0x1000000),  (PHYS_OFFSET+0*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+1*0x1000000),  (PHYS_OFFSET+1*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+2*0x1000000),  (PHYS_OFFSET+2*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+3*0x1000000),  (PHYS_OFFSET+3*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+4*0x1000000),  (PHYS_OFFSET+4*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+5*0x1000000),  (PHYS_OFFSET+5*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+6*0x1000000),  (PHYS_OFFSET+6*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+7*0x1000000),  (PHYS_OFFSET+7*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+8*0x1000000),  (PHYS_OFFSET+8*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+9*0x1000000),  (PHYS_OFFSET+9*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+10*0x1000000), (PHYS_OFFSET+10*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+11*0x1000000), (PHYS_OFFSET+11*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+12*0x1000000), (PHYS_OFFSET+12*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+13*0x1000000), (PHYS_OFFSET+13*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+14*0x1000000), (PHYS_OFFSET+14*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++	mmu_map	(PAGE_OFFSET+15*0x1000000), (PHYS_OFFSET+15*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++
++	/* Do unity mapping to enable the MMU.  Map first 16 MB in place as 
++	   code (delete TLBs after MMU is enabled and we are executing in high 
++	   memory). */
++	mmu_map	(PHYS_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), \
++		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_INC,  MMUDR_SP, 0, \
++		0, MMUDR_X, 0, %d0
++	/* Map first 16 MB as data too.  */
++	mmu_map	(PHYS_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, 0, %d0
++
++	/* Turn on MMU */
++	movel	#(MMUCR_EN),%a0
++	movel	%a0,MMUCR
++	nop	/* This synchs the pipeline after a write to MMUCR */
++
++	movel	#__running_high,%a0  /* Get around PC-relative addressing. */
++	jmp	%a0@
++
++ENTRY(__running_high)
++	load_symbol_address _stext,%sp
++	movel	L(memory_start),%a0
++	movel	%a0,availmem
++	load_symbol_address L(phys_kernel_start),%a0
++	load_symbol_address _stext,%a1
++	subl	#_stext,%a1
++	addl	#PAGE_OFFSET,%a1
++	movel	%a1,%a0@
++
++	/* Unmap first 16 MB, code and data.  */
++	mmu_unmap (PHYS_OFFSET+0*0x1000000), MMUOR_ITLB, %d0
++	mmu_unmap (PHYS_OFFSET+0*0x1000000), 0, %d0
++
++/* Setup initial stack pointer */
++	lea	init_task,%a2 
++	lea	init_thread_union+THREAD_SIZE,%sp
++	subl	%a6,%a6		/* clear a6 for gdb */
++
++#ifdef CONFIG_MCF_USER_HALT
++/* Setup debug control reg to allow halts from user space */
++	lea	wdbg_uhe,%a0
++	wdebug	(%a0)
++#endif
++
++	movel	%a4,uboot_info_stk /* save uboot info to variable */
++	jsr	cf_early_init
++	jmp	start_kernel
++
++.section ".text.head","ax"
++set_context:
++func_start	set_context,%d0,(1*4)
++	movel	12(%sp),%d0
++	movec	%d0,%asid
++func_return	set_context
++
++/*
++ * set_fpga(addr,val)
++ *
++ * Map in 0x00000000 -> 0x0fffffff and then do the write.
++ */
++set_fpga:
++	movew	%sr,%d1
++	movew	#0x2700,%sr
++	movel	ACR0_FPGA, %d0
++	movec   %d0, %acr0
++	nop
++	moveal	4(%sp),%a0
++	movel	8(%sp),%a0@
++	movel	ACR0_DEFAULT, %d0
++	movec   %d0, %acr0
++	nop
++	movew	%d1,%sr
++	rts
++
++	.data
++	.align	4
++
++availmem:
++	.long	0
++L(phys_kernel_start):
++	.long	PAGE_OFFSET
++L(kernel_end):
++	.long	0
++L(memory_start):
++	.long	PAGE_OFFSET_RAW
++
++#ifdef CONFIG_MCF_USER_HALT
++/*
++ * Enable User Halt Enable in the debug control register.
++ */
++wdbg_uhe:
++	.word	0x2c80	/* DR0 */
++	.word	0x00b0	/* 31:16 */
++	.word	0x0400	/* 15:0 -- enable UHE */
++	.word	0x0000	/* unused */
++#endif
++
++
+--- /dev/null
++++ b/arch/m68k/coldfire/ints.c
+@@ -0,0 +1,384 @@
++/*
++ * linux/arch/m68k/coldfire/ints.c -- General interrupt handling code
++ *
++ * Copyright (C) 1999-2002  Greg Ungerer (gerg@snapgear.com)
++ * Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
++ *                     Kenneth Albanowski <kjahds@kjahds.com>,
++ * Copyright (C) 2000  Lineo Inc. (www.lineo.com)
++ * Matt Waddel Matt.Waddel@freescale.com
++ * Copyright Freescale Semiconductor, Inc. 2007
++ * Kurt Mahan kmahan@freescale.com
++ *
++ * Based on:
++ * linux/arch/m68k/kernel/ints.c &
++ * linux/arch/m68knommu/5307/ints.c
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/kernel_stat.h>
++#include <linux/errno.h>
++#include <linux/seq_file.h>
++#include <linux/interrupt.h>
++
++#include <asm/system.h>
++#include <asm/irq.h>
++#include <asm/traps.h>
++#include <asm/page.h>
++#include <asm/machdep.h>
++#include <asm/irq_regs.h>
++
++#include <asm/mcfsim.h>
++
++/*
++ * IRQ Handler lists.
++ */
++static struct irq_node *irq_list[SYS_IRQS];
++static struct irq_controller *irq_controller[SYS_IRQS];
++static int irq_depth[SYS_IRQS];
++
++/*
++ * IRQ Controller
++ */
++#ifdef CONFIG_M54455
++void m5445x_irq_enable(unsigned int irq);
++void m5445x_irq_disable(unsigned int irq);
++static struct irq_controller m5445x_irq_controller = {
++	.name		= "M5445X",
++	.lock		= SPIN_LOCK_UNLOCKED,
++	.enable		= m5445x_irq_enable,
++	.disable	= m5445x_irq_disable,
++};
++#endif
++
++#define	POOL_SIZE 	SYS_IRQS
++static struct irq_node  pool[POOL_SIZE];
++static struct irq_node *get_irq_node(void);
++
++/* The number of spurious interrupts */
++unsigned int num_spurious;
++asmlinkage void handle_badint(struct pt_regs *regs);
++
++/*
++ * void init_IRQ(void)
++ *
++ * This function should be called during kernel startup to initialize
++ * the IRQ handling routines.
++ */
++void __init init_IRQ(void)
++{
++	int i;
++
++#ifdef CONFIG_M54455
++	for (i = 0; i < SYS_IRQS; i++)
++		irq_controller[i] = &m5445x_irq_controller;
++#endif
++}
++
++/*
++ * process_int(unsigned long vec, struct pt_regs *fp)
++ *
++ * Process an interrupt.  Called from entry.S.
++ */
++asmlinkage void process_int(unsigned long vec, struct pt_regs *fp)
++{
++	struct pt_regs *old_regs;
++	struct irq_node *node;
++	old_regs = set_irq_regs(fp);
++	kstat_cpu(0).irqs[vec]++;
++
++	node = irq_list[vec];
++	if (!node)
++		handle_badint(fp);
++	else {
++		do {
++			node->handler(vec, node->dev_id);
++			node = node->next;
++		} while (node);
++	}
++
++	set_irq_regs(old_regs);
++}
++
++/*
++ * show_interrupts( struct seq_file *p, void *v)
++ *
++ * Called to show all the current interrupt information.
++ */
++int show_interrupts(struct seq_file *p, void *v)
++{
++	struct irq_controller *contr;
++	struct irq_node *node;
++	int i = *(loff_t *) v;
++
++	if ((i < NR_IRQS) && (irq_list[i])) {
++		contr = irq_controller[i];
++		node = irq_list[i];
++		seq_printf(p, "%-8s %3u: %10u %s", contr->name, i,
++			kstat_cpu(0).irqs[i], node->devname);
++		while ((node = node->next))
++			seq_printf(p, ", %s", node->devname);
++
++		seq_printf(p, "\n");
++	}
++
++	return 0;
++}
++
++/*
++ * get_irq_node(void)
++ *
++ * Get an irq node from the pool.
++ */
++struct irq_node *get_irq_node(void)
++{
++	struct irq_node *p = pool;
++	int i;
++
++	for (i = 0; i < POOL_SIZE; i++, p++) {
++		if (!p->handler) {
++			memset(p, 0, sizeof(struct irq_node));
++			return p;
++		}
++	}
++	printk(KERN_INFO "%s(%s:%d): No more irq nodes, I suggest you \
++		increase POOL_SIZE", __FUNCTION__, __FILE__, __LINE__);
++	return NULL;
++}
++
++void init_irq_proc(void)
++{
++	/* Insert /proc/irq driver here */
++}
++
++int setup_irq(unsigned int irq, struct irq_node *node)
++{
++	struct irq_controller *contr;
++	struct irq_node **prev;
++	unsigned long flags;
++
++	if (irq >= NR_IRQS || !irq_controller[irq]) {
++		printk("%s: Incorrect IRQ %d from %s\n",
++		       __FUNCTION__, irq, node->devname);
++		return -ENXIO;
++	}
++
++	contr = irq_controller[irq];
++	spin_lock_irqsave(&contr->lock, flags);
++
++	prev = irq_list + irq;
++	if (*prev) {
++		/* Can't share interrupts unless both agree to */
++		if (!((*prev)->flags & node->flags & IRQF_SHARED)) {
++			spin_unlock_irqrestore(&contr->lock, flags);
++			return -EBUSY;
++		}
++		while (*prev)
++			prev = &(*prev)->next;
++	}
++
++	if (!irq_list[irq]) {
++		if (contr->startup)
++			contr->startup(irq);
++		else
++			contr->enable(irq);
++	}
++	node->next = NULL;
++	*prev = node;
++
++	spin_unlock_irqrestore(&contr->lock, flags);
++
++	return 0;
++}
++
++int request_irq(unsigned int irq,
++		irq_handler_t handler,
++		unsigned long flags, const char *devname, void *dev_id)
++{
++	struct irq_node *node = get_irq_node();
++	int res;
++
++	if (!node)
++		return -ENOMEM;
++
++	node->handler = handler;
++	node->flags   = flags;
++	node->dev_id  = dev_id;
++	node->devname = devname;
++
++	res = setup_irq(irq, node);
++	if (res)
++		node->handler = NULL;
++
++	return res;
++}
++EXPORT_SYMBOL(request_irq);
++
++void free_irq(unsigned int irq, void *dev_id)
++{
++	struct irq_controller *contr;
++	struct irq_node **p, *node;
++	unsigned long flags;
++
++	if (irq >= NR_IRQS || !irq_controller[irq]) {
++		printk(KERN_DEBUG "%s: Incorrect IRQ %d\n", __FUNCTION__, irq);
++		return;
++	}
++
++	contr = irq_controller[irq];
++	spin_lock_irqsave(&contr->lock, flags);
++
++	p = irq_list + irq;
++	while ((node = *p)) {
++		if (node->dev_id == dev_id)
++			break;
++		p = &node->next;
++	}
++
++	if (node) {
++		*p = node->next;
++		node->handler = NULL;
++	} else
++		printk(KERN_DEBUG "%s: Removing probably wrong IRQ %d\n",
++		       __FUNCTION__, irq);
++
++	if (!irq_list[irq]) {
++		if (contr->shutdown)
++			contr->shutdown(irq);
++		else
++			contr->disable(irq);
++	}
++
++	spin_unlock_irqrestore(&contr->lock, flags);
++}
++EXPORT_SYMBOL(free_irq);
++
++void enable_irq(unsigned int irq)
++{
++	struct irq_controller *contr;
++	unsigned long flags;
++
++	if (irq >= NR_IRQS || !irq_controller[irq]) {
++		printk(KERN_DEBUG "%s: Incorrect IRQ %d\n", __FUNCTION__, irq);
++		return;
++	}
++
++	contr = irq_controller[irq];
++	spin_lock_irqsave(&contr->lock, flags);
++	if (irq_depth[irq]) {
++		if (!--irq_depth[irq]) {
++			if (contr->enable)
++				contr->enable(irq);
++		}
++	} else
++		WARN_ON(1);
++	spin_unlock_irqrestore(&contr->lock, flags);
++}
++EXPORT_SYMBOL(enable_irq);
++
++void disable_irq(unsigned int irq)
++{
++	struct irq_controller *contr;
++	unsigned long flags;
++
++	if (irq >= NR_IRQS || !irq_controller[irq]) {
++		printk(KERN_DEBUG "%s: Incorrect IRQ %d\n", __FUNCTION__, irq);
++		return;
++	}
++
++	contr = irq_controller[irq];
++	spin_lock_irqsave(&contr->lock, flags);
++	if (!irq_depth[irq]++) {
++		if (contr->disable)
++			contr->disable(irq);
++	}
++	spin_unlock_irqrestore(&contr->lock, flags);
++}
++EXPORT_SYMBOL(disable_irq);
++
++unsigned long probe_irq_on(void)
++{
++	return 0;
++}
++EXPORT_SYMBOL(probe_irq_on);
++
++int probe_irq_off(unsigned long irqs)
++{
++	return 0;
++}
++EXPORT_SYMBOL(probe_irq_off);
++
++asmlinkage void handle_badint(struct pt_regs *regs)
++{
++	kstat_cpu(0).irqs[0]++;
++	num_spurious++;
++	printk(KERN_DEBUG "unexpected interrupt from %u\n", regs->vector);
++}
++EXPORT_SYMBOL(handle_badint);
++
++#ifdef CONFIG_M54455
++/*
++ * M5445X Implementation
++ */
++void m5445x_irq_enable(unsigned int irq)
++{
++	/* enable the interrupt hardware */
++	if (irq < 64)
++		return;
++
++	/* adjust past non-hardware ints */
++	irq -= 64;
++
++	/* check for eport */
++	if ((irq > 0) && (irq < 8)) {
++		/* enable eport */
++		MCF_EPORT_EPPAR &= ~(3 << (irq*2));	/* level */
++		MCF_EPORT_EPDDR &= ~(1 << irq);		/* input */
++		MCF_EPORT_EPIER |= 1 << irq;		/* irq enabled */
++	}
++
++	if (irq < 64) {
++		/* controller 0 */
++		MCF_INTC0_ICR(irq) = 0x02;
++		MCF_INTC0_CIMR = irq;
++	} else {
++		/* controller 1 */
++		irq -= 64;
++		MCF_INTC1_ICR(irq) = 0x02;
++		MCF_INTC1_CIMR = irq;
++	}
++}
++
++void m5445x_irq_disable(unsigned int irq)
++{
++	/* disable the interrupt hardware */
++	if (irq < 64)
++		return;
++
++	/* adjust past non-hardware ints */
++	irq -= 64;
++
++	/* check for eport */
++	if ((irq > 0) && (irq < 8)) {
++		/* disable eport */
++		MCF_EPORT_EPIER &= ~(1 << irq);
++	}
++
++	if (irq < 64) {
++		/* controller 0 */
++		MCF_INTC0_ICR(irq) = 0x00;
++		MCF_INTC0_SIMR = irq;
++	} else {
++		/* controller 1 */
++		irq -= 64;
++		MCF_INTC1_ICR(irq) = 0x00;
++		MCF_INTC1_SIMR = irq;
++	}
++}
++#endif
+--- /dev/null
++++ b/arch/m68k/coldfire/iomap.c
+@@ -0,0 +1,54 @@
++/*
++ * arch/m68k/coldfire/iomap.c
++ *
++ * Generic coldfire iomap interface
++ *
++ * Based on the sh64 iomap.c by Paul Mundt.
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ */
++#include <linux/pci.h>
++#include <asm/io.h>
++
++void __iomem *__attribute__ ((weak))
++ioport_map(unsigned long port, unsigned int len)
++{
++	return (void __iomem *)port;
++}
++EXPORT_SYMBOL(pci_iomap);
++
++void ioport_unmap(void __iomem *addr)
++{
++	/* Nothing .. */
++}
++EXPORT_SYMBOL(pci_iounmap);
++
++void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
++{
++	unsigned long start = pci_resource_start(dev, bar);
++	unsigned long len = pci_resource_len(dev, bar);
++	unsigned long flags = pci_resource_flags(dev, bar);
++printk(KERN_INFO "PCI_IOMAP: BAR=%d  START=0x%lx  LEN=0x%lx  FLAGS=0x%lx\n",
++       bar, start, len, flags);
++
++	if (!len)
++		return NULL;
++	if (max && len > max)
++		len = max;
++	if (flags & IORESOURCE_IO)
++		return ioport_map(start, len);
++	if (flags & IORESOURCE_MEM)
++		return (void __iomem *)start;
++
++	/* What? */
++	return NULL;
++}
++EXPORT_SYMBOL(ioport_map);
++
++void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
++{
++	/* Nothing .. */
++}
++EXPORT_SYMBOL(ioport_unmap);
+--- /dev/null
++++ b/arch/m68k/coldfire/mcf5445x-pci.c
+@@ -0,0 +1,427 @@
++/*
++ * arch/m68k/coldfire/mcf5445x-pci.c
++ *
++ * Coldfire M5445x specific PCI implementation.
++ *
++ * Copyright (c) 2007 Freescale Semiconductor, Inc.
++ *	Kurt Mahan <kmahan@freescale.com>
++ */
++
++#include <linux/delay.h>
++#include <linux/pci.h>
++
++#include <asm/mcfsim.h>
++#include <asm/pci.h>
++#include <asm/irq.h>
++
++/*
++ * Layout MCF5445x to PCI memory mappings:
++ *
++ *	WIN         MCF5445x                    PCI            TYPE
++ *	---         --------                    ---            ----
++ *	[0] 0xA0000000 -> 0xA7FFFFFF  0xA0000000 -> 0xA7FFFFFF  MEM
++ *	[1] 0xA8000000 -> 0xABFFFFFF  0xA8000000 -> 0xABFFFFFF  MEM
++ *	[2] 0xAC000000 -> 0xAFFFFFFF  0xAC000000 -> 0xAFFFFFFF  IO
++ */
++
++#define MCF5445X_PCI_MEM_BASE		0xA0000000
++#define MCF5445X_PCI_MEM_SIZE		0x0C000000
++
++#define MCF5445X_PCI_CONFIG_BASE	0xAC000000
++#define MCF5445X_PCI_CONFIG_SIZE	0x04000000
++
++#define MCF5445X_PCI_IO_BASE		0xAC000000
++#define MCF5445X_PCI_IO_SIZE		0x04000000
++
++/* PCI Bus memory resource block */
++struct resource pci_iomem_resource = {
++	.name = "PCI memory space",
++	.start = MCF5445X_PCI_MEM_BASE,
++	.flags = IORESOURCE_MEM,
++	.end = MCF5445X_PCI_MEM_BASE + MCF5445X_PCI_MEM_SIZE - 1
++};
++
++/* PCI Bus ioport resource block */
++struct resource pci_ioport_resource = {
++	.name = "PCI I/O space",
++	.start = MCF5445X_PCI_IO_BASE,
++	.flags = IORESOURCE_IO,
++	.end = MCF5445X_PCI_IO_BASE + MCF5445X_PCI_IO_SIZE - 1
++};
++
++/*
++ * The M54455EVB multiplexes all the PCI interrupts via
++ * the FPGA and routes them to a single interrupt.  The
++ * PCI spec requires all PCI interrupt routines be smart
++ * enough to sort out their own interrupts.
++ * The interrupt source from the FPGA is configured
++ * to EPORT 3.
++ */
++#define MCF5445X_PCI_IRQ		0x43
++
++#define PCI_SLOTS			4
++
++/*
++ * FPGA Info
++ */
++#define FPGA_PCI_IRQ_ENABLE		(u32 *)0x09000000
++#define FPGA_PCI_IRQ_STATUS		(u32 *)0x09000004
++#define FPGA_PCI_IRQ_ROUTE 		(u32 *)0x0900000c
++#define FPGA_SEVEN_LED			(u32 *)0x09000014
++
++extern void set_fpga(u32 *addr, u32 val);
++
++#ifdef DEBUG
++void mcf5445x_pci_dumpregs(void);
++#endif
++
++/*
++ * static void mcf5445x_conf_device(struct pci_dev *dev)
++ *
++ * Machine dependent Configure the given device.
++ *
++ * Parameters:
++ *
++ * dev		- the pci device.
++ */
++void __init
++mcf5445x_conf_device(struct pci_dev *dev)
++{
++	set_fpga(FPGA_PCI_IRQ_ENABLE, 0x0f);
++}
++
++/*
++ * int mcf5445x_pci_config_read(unsigned int seg, unsigned int bus,
++ *			      	unsigned int devfn, int reg,
++ *			      	u32 *value)
++ *
++ * Read from PCI configuration space.
++ *
++ */
++int mcf5445x_pci_config_read(unsigned int seg, unsigned int bus,
++			     unsigned int devfn, int reg, int len, u32 *value)
++{
++	u32 addr = MCF_PCI_PCICAR_BUSNUM(bus) |
++		   MCF_PCI_PCICAR_DEVNUM(PCI_SLOT(devfn)) |
++		   MCF_PCI_PCICAR_FUNCNUM(PCI_FUNC(devfn)) |
++		   MCF_PCI_PCICAR_DWORD(reg) |
++		   MCF_PCI_PCICAR_E;
++
++	if ((bus > 255) || (devfn > 255) || (reg > 255)) {
++		*value = -1;
++		return -EINVAL;
++	}
++
++	/* setup for config mode */
++	MCF_PCI_PCICAR = addr;
++	__asm__ __volatile__("nop");
++
++	switch (len) {
++	case 1:
++		*value = *(volatile u8 *)(MCF5445X_PCI_CONFIG_BASE+(reg&3));
++		break;
++	case 2:
++		*value = le16_to_cpu(*(volatile u16 *)
++				(MCF5445X_PCI_CONFIG_BASE + (reg&2)));
++		break;
++	case 4:
++		*value = le32_to_cpu(*(volatile u32 *)
++				(MCF5445X_PCI_CONFIG_BASE));
++		break;
++	}
++
++	/* clear config mode */
++	MCF_PCI_PCICAR = ~MCF_PCI_PCICAR_E;
++	__asm__ __volatile__("nop");
++
++	return 0;
++}
++
++/*
++ * int mcf5445x_pci_config_write(unsigned int seg, unsigned int bus,
++ *			      	 unsigned int devfn, int reg,
++ *			      	 u32 *value)
++ *
++ * Write to PCI configuration space
++ */
++int mcf5445x_pci_config_write(unsigned int seg, unsigned int bus,
++		    unsigned int devfn, int reg, int len, u32 value)
++{
++	u32 addr = MCF_PCI_PCICAR_BUSNUM(bus) |
++		   MCF_PCI_PCICAR_DEVNUM(PCI_SLOT(devfn)) |
++		   MCF_PCI_PCICAR_FUNCNUM(PCI_FUNC(devfn)) |
++		   MCF_PCI_PCICAR_DWORD(reg) |
++		   MCF_PCI_PCICAR_E;
++
++	if ((bus > 255) || (devfn > 255) || (reg > 255))
++		return -EINVAL;
++
++	/* setup for config mode */
++	MCF_PCI_PCICAR = addr;
++	__asm__ __volatile__("nop");
++
++	switch (len) {
++	case 1:
++		*(volatile u8 *)(MCF5445X_PCI_CONFIG_BASE+(reg&3)) = (u8)value;
++		break;
++	case 2:
++		*(volatile u16 *)(MCF5445X_PCI_CONFIG_BASE+(reg&2)) =
++				cpu_to_le16((u16)value);
++		break;
++	case 4:
++		*(volatile u32 *)(MCF5445X_PCI_CONFIG_BASE) =
++				cpu_to_le32(value);
++		break;
++	}
++
++	/* clear config mode */
++	MCF_PCI_PCICAR = ~MCF_PCI_PCICAR_E;
++	__asm__ __volatile__("nop");
++
++	return 0;
++}
++
++/* hardware operations */
++static struct pci_raw_ops mcf5445x_pci_ops = {
++	.read =		mcf5445x_pci_config_read,
++	.write =	mcf5445x_pci_config_write,
++};
++
++/*
++ * irqreturn_t mcf5445x_pci_interrupt( int irq, void *dev)
++ *
++ * PCI controller interrupt handler.
++ */
++static irqreturn_t
++mcf5445x_pci_interrupt(int irq, void *dev)
++{
++	u32 status = MCF_PCI_PCIGSCR;
++#ifdef DEBUG
++	printk(KERN_INFO "PCI: Controller irq status=0x%08x\n", status);
++#endif
++	/* clear */
++	MCF_PCI_PCIGSCR = status;
++
++	return IRQ_HANDLED;
++}
++
++/*
++ * irqreturn_t mcf5445x_pci_arb_interrupt( int irq, void *dev)
++ *
++ * PCI Arbiter interrupt handler.
++ */
++static irqreturn_t
++mcf5445x_pci_arb_interrupt(int irq, void *dev)
++{
++	u32 status = MCF_PCIARB_PASR;
++#ifdef DEBUG
++	printk(KERN_INFO "PCI: Arbiter irq status=0x%08x\n", status);
++#endif
++	/* clear */
++	MCF_PCIARB_PASR = status;
++	return IRQ_HANDLED;
++}
++
++/*
++ * struct pci_bus_info *init_mcf5445x_pci(void)
++ *
++ * Machine specific initialisation:
++ *
++ * - Allocate and initialise a 'pci_bus_info' structure
++ * - Initialize hardware
++ *
++ * Result: pointer to 'pci_bus_info' structure.
++ */
++int __init
++init_mcf5445x_pci(void)
++{
++	/*
++	 * Initialize the PCI core
++	 */
++
++	/* arbitration controller */
++	MCF_PCIARB_PACR = MCF_PCIARB_PACR_INTMPRI |
++			  MCF_PCIARB_PACR_EXTMPRI(0x0f) |
++			  MCF_PCIARB_PACR_INTMINTEN |
++			  MCF_PCIARB_PACR_EXTMINTEN(0x0f);
++
++	/* pci pin assignment regs */
++	MCF_GPIO_PAR_PCI = MCF_GPIO_PAR_PCI_GNT0 |
++			   MCF_GPIO_PAR_PCI_GNT1 |
++			   MCF_GPIO_PAR_PCI_GNT2 |
++			   MCF_GPIO_PAR_PCI_GNT3_GNT3 |
++			   MCF_GPIO_PAR_PCI_REQ0 |
++			   MCF_GPIO_PAR_PCI_REQ1 |
++			   MCF_GPIO_PAR_PCI_REQ2 |
++			   MCF_GPIO_PAR_PCI_REQ3_REQ3;
++
++	/* target control reg */
++	MCF_PCI_PCITCR = MCF_PCI_PCITCR_P |
++			 MCF_PCI_PCITCR_WCT(8);
++
++	/* PCI MEM address */
++	MCF_PCI_PCIIW0BTAR = 0xA007A000;
++
++	/* PCI MEM address */
++	MCF_PCI_PCIIW1BTAR = 0xA803A800;
++
++	/* PCI IO address */
++	MCF_PCI_PCIIW2BTAR = 0xAC03AC00;
++
++	/* window control */
++	MCF_PCI_PCIIWCR = MCF_PCI_PCIIWCR_WINCTRL0_ENABLE |
++			  MCF_PCI_PCIIWCR_WINCTRL0_MEMREAD |
++			  MCF_PCI_PCIIWCR_WINCTRL1_ENABLE |
++			  MCF_PCI_PCIIWCR_WINCTRL1_MEMREAD |
++			  MCF_PCI_PCIIWCR_WINCTRL2_ENABLE |
++			  MCF_PCI_PCIIWCR_WINCTRL2_IO;
++
++	/* initiator control reg */
++	MCF_PCI_PCIICR = 0x00ff;
++
++	/* type 0 - command */
++	MCF_PCI_PCISCR = MCF_PCI_PCISCR_MW |	/* mem write/inval */
++			 MCF_PCI_PCISCR_B |	/* bus master enable */
++			 MCF_PCI_PCISCR_M;	/* mem access enable */
++
++	/* type 0 - config reg */
++	MCF_PCI_PCICR1 = MCF_PCI_PCICR1_CACHELINESIZE(8) |
++			 MCF_PCI_PCICR1_LATTIMER(0xff);
++
++	/* type 0 - config 2 reg */
++	MCF_PCI_PCICR2 = 0;
++
++	/* target control reg */
++	MCF_PCI_PCITCR2 = MCF_PCI_PCITCR2_B0E |
++			  MCF_PCI_PCITCR2_B4E;
++
++	/* translate addresses from PCI[0] to CF[SDRAM] */
++	MCF_PCI_PCITBATR0 = MCF_RAMBAR1 | MCF_PCI_PCITBATR0_EN;
++	MCF_PCI_PCITBATR4 = MCF_RAMBAR1 | MCF_PCI_PCITBATR4_EN;
++
++	/* setup controller interrupt handlers */
++	if (request_irq(55+128, mcf5445x_pci_interrupt, IRQF_SHARED,
++			"PCI Controller", NULL))
++		printk(KERN_ERR "PCI: Unable to register controller irq\n");
++
++	if (request_irq (56+128, mcf5445x_pci_arb_interrupt, IRQF_SHARED, "PCI Arbiter", NULL))
++		printk(KERN_ERR "PCI: Unable to register arbiter irq\n");
++
++	/* global control - clear reset bit */
++	MCF_PCI_PCIGSCR = MCF_PCI_PCIGSCR_SEE |
++			  MCF_PCI_PCIGSCR_PEE;
++
++	/* let everything settle */
++	udelay(1000);
++
++	/* allocate bus ioport resource */
++	if (request_resource(&ioport_resource, &pci_ioport_resource) < 0)
++		printk(KERN_ERR "PCI: Unable to alloc ioport resource\n");
++
++	/* allocate bus iomem resource */
++	if (request_resource(&iomem_resource, &pci_iomem_resource) < 0)
++		printk(KERN_ERR "PCI: Unable to alloc iomem resource\n");
++
++	/* setup FPGA to route PCI to IRQ3(67), SW7 to IRQ7, SW6 to IRQ4 */
++	set_fpga(FPGA_PCI_IRQ_ENABLE, 0x00000000);
++	set_fpga(FPGA_PCI_IRQ_ROUTE, 0x00000039);
++	set_fpga(FPGA_SEVEN_LED, 0x000000FF);
++
++	raw_pci_ops = &mcf5445x_pci_ops;
++
++	return 0;
++}
++
++/*
++ * DEBUGGING
++ */
++
++#ifdef DEBUG
++struct regdump {
++	u32 addr;
++	char regname[16];
++};
++
++struct regdump type0regs[] = {
++	{ 0xfc0a8000, "PCIIDR" },
++	{ 0xfc0a8004, "PCISCR" },
++	{ 0xfc0a8008, "PCICCRIR" },
++	{ 0xfc0a800c, "PCICR1" },
++	{ 0xfc0a8010, "PCIBAR0" },
++	{ 0xfc0a8014, "PCIBAR1" },
++	{ 0xfc0a8018, "PCIBAR2" },
++	{ 0xfc0a801c, "PCIBAR3" },
++	{ 0xfc0a8020, "PCIBAR4" },
++	{ 0xfc0a8024, "PCIBAR5" },
++	{ 0xfc0a8028, "PCICCPR" },
++	{ 0xfc0a802c, "PCISID" },
++	{ 0xfc0a8030, "PCIERBAR" },
++	{ 0xfc0a8034, "PCICPR" },
++	{ 0xfc0a803c, "PCICR2" },
++	{ 0, "" }
++};
++
++struct regdump genregs[] = {
++	{ 0xfc0a8060, "PCIGSCR" },
++	{ 0xfc0a8064, "PCITBATR0" },
++	{ 0xfc0a8068, "PCITBATR1" },
++	{ 0xfc0a806c, "PCITCR1" },
++	{ 0xfc0a8070, "PCIIW0BTAR" },
++	{ 0xfc0a8074, "PCIIW1BTAR" },
++	{ 0xfc0a8078, "PCIIW2BTAR" },
++	{ 0xfc0a8080, "PCIIWCR" },
++	{ 0xfc0a8084, "PCIICR" },
++	{ 0xfc0a8088, "PCIISR" },
++	{ 0xfc0a808c, "PCITCR2" },
++	{ 0xfc0a8090, "PCITBATR0" },
++	{ 0xfc0a8094, "PCITBATR1" },
++	{ 0xfc0a8098, "PCITBATR2" },
++	{ 0xfc0a809c, "PCITBATR3" },
++	{ 0xfc0a80a0, "PCITBATR4" },
++	{ 0xfc0a80a4, "PCITBATR5" },
++	{ 0xfc0a80a8, "PCIINTR" },
++	{ 0xfc0a80f8, "PCICAR" },
++	{ 0, "" }
++};
++
++struct regdump arbregs[] = {
++	{ 0xfc0ac000, "PACR" },
++	{ 0xfc0ac004, "PASR" },	/* documentation error */
++	{ 0, "" }
++};
++
++/*
++ * void mcf5445x_pci_dumpregs()
++ *
++ * Dump out all the PCI registers
++ */
++void
++mcf5445x_pci_dumpregs(void)
++{
++	struct regdump *reg;
++
++	printk(KERN_INFO "*** MCF5445x PCI TARGET 0 REGISTERS ***\n");
++
++	reg = type0regs;
++	while (reg->addr) {
++		printk(KERN_INFO "0x%08x  0x%08x  %s\n", reg->addr,
++			*((u32 *)reg->addr), reg->regname);
++		reg++;
++	}
++
++	printk(KERN_INFO "\n*** MCF5445x PCI GENERAL REGISTERS ***\n");
++	reg = genregs;
++	while (reg->addr) {
++		printk(KERN_INFO "0x%08x  0x%08x  %s\n", reg->addr,
++			*((u32 *)reg->addr), reg->regname);
++		reg++;
++	}
++	printk(KERN_INFO "\n*** MCF5445x PCI ARBITER REGISTERS ***\n");
++	reg = arbregs;
++	while (reg->addr) {
++		printk(KERN_INFO "0x%08x  0x%08x  %s\n", reg->addr,
++			*((u32 *)reg->addr), reg->regname);
++		reg++;
++	}
++}
++#endif /* DEBUG */
+--- /dev/null
++++ b/arch/m68k/coldfire/muldi3.S
+@@ -0,0 +1,64 @@
++/*
++ * Coldfire muldi3 assembly verion
++ */
++ 
++#include <linux/linkage.h>
++.globl __muldi3
++
++ENTRY(__muldi3)
++	linkw 	%fp,#0
++	lea 	%sp@(-32),%sp
++	moveml 	%d2-%d7/%a2-%a3,%sp@
++	moveal 	%fp@(8), %a2
++	moveal 	%fp@(12), %a3
++	moveal  %fp@(16), %a0
++	moveal  %fp@(20),%a1
++	movel 	%a3,%d2
++	andil   #65535,%d2
++	movel   %a3,%d3
++	clrw 	%d3
++	swap 	%d3
++	movel 	%a1,%d0
++	andil 	#65535,%d0
++	movel 	%a1,%d1
++	clrw 	%d1
++	swap 	%d1
++	movel 	%d2,%d7
++	mulsl 	%d0,%d7
++	movel 	%d2,%d4
++	mulsl 	%d1,%d4
++	movel 	%d3,%d2
++	mulsl 	%d0,%d2
++	mulsl 	%d1,%d3
++	movel 	%d7,%d0
++	clrw 	%d0
++	swap 	%d0
++	addl 	%d0,%d4
++	addl 	%d2,%d4
++	cmpl 	%d4,%d2
++	blss 	1f
++	addil 	#65536,%d3
++1:
++	movel 	%d4,%d0
++	clrw 	%d0
++	swap 	%d0
++	movel 	%d3,%d5
++	addl 	%d0,%d5
++	movew 	%d4,%d6
++	swap 	%d6
++	movew 	%d7,%d6
++	movel 	%d5,%d0
++	movel 	%d6,%d1
++	movel 	%a3,%d2
++	movel 	%a0,%d3
++	mulsl 	%d3,%d2
++	movel 	%a2,%d3
++	movel 	%a1,%d4
++	mulsl 	%d4,%d3
++	addl 	%d3,%d2
++	movel 	%d2,%d0
++	addl 	%d5,%d0
++	moveml 	%sp@, %d2-%d7/%a2-%a3
++	lea 	%sp@(32),%sp
++	unlk 	%fp
++	rts
+--- /dev/null
++++ b/arch/m68k/coldfire/pci.c
+@@ -0,0 +1,245 @@
++/*
++ * linux/arch/m68k/coldfire/pci.c
++ *
++ * PCI initialization for Coldfire architectures.
++ *
++ * Currently Supported:
++ *	M5445x
++ *
++ * Copyright (c) 2007 Freescale Semiconductor, Inc.
++ *	Kurt Mahan <kmahan@freescale.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/pci.h>
++
++#include <asm/mcfsim.h>
++#include <asm/pci.h>
++
++/* pci ops for reading/writing config */
++struct pci_raw_ops *raw_pci_ops;
++
++/* pci debug flag */
++static int debug_pci;
++
++#ifdef CONFIG_M54455
++extern int init_mcf5445x_pci(void);
++extern void mcf5445x_conf_device(struct pci_dev *dev);
++extern void mcf5445x_pci_dumpregs(void);
++
++extern struct resource pci_ioport_resource;
++extern struct resource pci_iomem_resource;
++#endif
++
++static int
++pci_read(struct pci_bus *bus, unsigned int devfn, int where,
++	 int size, u32 *value)
++{
++	return raw_pci_ops->read(0, bus->number, devfn, where, size, value);
++}
++
++static int
++pci_write(struct pci_bus *bus, unsigned int devfn, int where,
++	  int size, u32 value)
++{
++	return raw_pci_ops->write(0, bus->number, devfn, where, size, value);
++}
++
++struct pci_ops pci_root_ops = {
++	.read = pci_read,
++	.write = pci_write,
++};
++
++/*
++ * pcibios_setup(char *)
++ *
++ * Initialize the pcibios based on cmd line params.
++ */
++char * __init
++pcibios_setup(char *str)
++{
++	if (!strcmp(str, "debug")) {
++		debug_pci = 1;
++		return NULL;
++	}
++	return str;
++}
++
++/*
++ * We need to avoid collisions with `mirrored' VGA ports
++ * and other strange ISA hardware, so we always want the
++ * addresses to be allocated in the 0x000-0x0ff region
++ * modulo 0x400.
++ *
++ * Why? Because some silly external IO cards only decode
++ * the low 10 bits of the IO address. The 0x00-0xff region
++ * is reserved for motherboard devices that decode all 16
++ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
++ * but we want to try to avoid allocating at 0x2900-0x2bff
++ * which might have be mirrored at 0x0100-0x03ff..
++ */
++void
++pcibios_align_resource(void *data, struct resource *res, resource_size_t size,
++		       resource_size_t align)
++{
++	struct pci_dev *dev = data;
++
++	if (res->flags & IORESOURCE_IO) {
++		resource_size_t start = res->start;
++
++		if (size > 0x100)
++			printk(KERN_ERR "PCI: I/O Region %s/%d too large"
++			       " (%ld bytes)\n", pci_name(dev),
++			       dev->resource - res, (long int)size);
++
++		if (start & 0x300) {
++			start = (start + 0x3ff) & ~0x3ff;
++			res->start = start;
++		}
++	}
++}
++
++/*
++ * Swizzle the device pin each time we cross a bridge
++ * and return the slot number.
++ */
++static u8 __devinit
++pcibios_swizzle(struct pci_dev *dev, u8 *pin)
++{
++	return 0;
++}
++
++/*
++ * Map a slot/pin to an IRQ.
++ */
++static int
++pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++	return 0x43;
++}
++
++/*
++ * pcibios_update_irq(struct pci_dev *dev, int irq)
++ *
++ * Update a PCI interrupt.
++ */
++void __init
++pcibios_update_irq(struct pci_dev *dev, int irq)
++{
++	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
++}
++
++/*
++ * pcibios_enable_device(struct pci_dev *dev, int mask)
++ *
++ * Enable a device on the PCI bus.
++ */
++int
++pcibios_enable_device(struct pci_dev *dev, int mask)
++{
++	u16 cmd, old_cmd;
++	int idx;
++	struct resource *r;
++
++	pci_read_config_word(dev, PCI_COMMAND, &cmd);
++	old_cmd = cmd;
++	for (idx = 0; idx < 6; idx++) {
++		r = &dev->resource[idx];
++		if (!r->start && r->end) {
++			printk(KERN_ERR "PCI: Device %s not available because "
++			       "of resource collisions\n", pci_name(dev));
++			return -EINVAL;
++		}
++		if (r->flags & IORESOURCE_IO)
++			cmd |= PCI_COMMAND_IO;
++		if (r->flags & IORESOURCE_MEM)
++			cmd |= PCI_COMMAND_MEMORY;
++	}
++	if (cmd != old_cmd) {
++		printk("PCI: Enabling device %s (%04x -> %04x)\n",
++		       pci_name(dev), old_cmd, cmd);
++		pci_write_config_word(dev, PCI_COMMAND, cmd);
++#ifdef CONFIG_M54455
++		mcf5445x_conf_device(dev);
++#endif
++	}
++
++	return 0;
++}
++
++/*
++ * pcibios_fixup_bus(struct pci_bus *bus)
++ */
++void __init
++pcibios_fixup_bus(struct pci_bus *bus)
++{
++	struct pci_dev *dev = bus->self;
++
++	if (!dev) {
++		/* Root bus. */
++#ifdef CONFIG_M54455
++		bus->resource[0] = &pci_ioport_resource;
++		bus->resource[1] = &pci_iomem_resource;
++#endif
++	}
++}
++
++/*
++ * pcibios_init(void)
++ *
++ * Allocate/initialize low level pci bus/devices.
++ */
++static int __init
++pcibios_init(void)
++{
++	struct pci_bus *bus;
++
++	if (!raw_pci_ops) {
++		printk(KERN_WARNING "PCIBIOS: FATAL: NO PCI Hardware found\n");
++		return 0;
++	}
++
++	/* allocate and scan the (only) bus */
++	bus = pci_scan_bus_parented(NULL, 0, &pci_root_ops, NULL);
++
++	/* setup everything */
++	if (bus) {
++		/* compute the bridge window sizes */
++		pci_bus_size_bridges(bus);
++
++		/* (re)assign device resources */
++		pci_bus_assign_resources(bus);
++
++		/* add the bus to the system */
++		pci_bus_add_devices(bus);
++
++		/* fixup irqs */
++		pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq);
++	}
++
++	return 0;
++}
++
++/*
++ * pci_init(void)
++ *
++ * Initialize the PCI Hardware.
++ */
++static int __init
++pci_init(void)
++{
++#if defined(CONFIG_M54455)
++	init_mcf5445x_pci();
++#endif
++	if (!raw_pci_ops)
++		printk(KERN_ERR "PCI: FATAL: NO PCI Detected\n");
++
++	return 0;
++}
++
++/* low level hardware (first) */
++arch_initcall(pci_init);
++
++/* basic bios init (second) */
++subsys_initcall(pcibios_init);
+--- /dev/null
++++ b/arch/m68k/coldfire/signal.c
+@@ -0,0 +1,868 @@
++/*
++ *  linux/arch/m68k/kernel/signal.c
++ *
++ *  Copyright (C) 1991, 1992  Linus Torvalds
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ */
++
++/*
++ * Derived from m68k/kernel/signal.c and the original authors are credited
++ * there.
++ *
++ * Coldfire support by:
++ * Matt Waddel Matt.Waddel@freescale.com
++ * Copyright Freescale Semiconductor, Inc 2007
++ */
++
++#include <linux/sched.h>
++#include <linux/mm.h>
++#include <linux/kernel.h>
++#include <linux/signal.h>
++#include <linux/syscalls.h>
++#include <linux/errno.h>
++#include <linux/wait.h>
++#include <linux/ptrace.h>
++#include <linux/unistd.h>
++#include <linux/stddef.h>
++#include <linux/highuid.h>
++#include <linux/personality.h>
++#include <linux/tty.h>
++#include <linux/binfmts.h>
++
++#include <asm/setup.h>
++#include <asm/cf_uaccess.h>
++#include <asm/cf_pgtable.h>
++#include <asm/traps.h>
++#include <asm/ucontext.h>
++
++#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
++
++asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs);
++
++const int frame_extra_sizes[16] = {
++  [1]	= -1,
++  [2]	= sizeof(((struct frame *)0)->un.fmt2),
++  [3]	= sizeof(((struct frame *)0)->un.fmt3),
++  [4]	= 0,
++  [5]	= -1,
++  [6]	= -1,
++  [7]	= sizeof(((struct frame *)0)->un.fmt7),
++  [8]	= -1,
++  [9]	= sizeof(((struct frame *)0)->un.fmt9),
++  [10]	= sizeof(((struct frame *)0)->un.fmta),
++  [11]	= sizeof(((struct frame *)0)->un.fmtb),
++  [12]	= -1,
++  [13]	= -1,
++  [14]	= -1,
++  [15]	= -1,
++};
++
++/*
++ * Atomically swap in the new signal mask, and wait for a signal.
++ */
++asmlinkage int do_sigsuspend(struct pt_regs *regs)
++{
++	old_sigset_t mask = regs->d3;
++	sigset_t saveset;
++
++	mask &= _BLOCKABLE;
++	spin_lock_irq(&current->sighand->siglock);
++	saveset = current->blocked;
++	siginitset(&current->blocked, mask);
++	recalc_sigpending();
++	spin_unlock_irq(&current->sighand->siglock);
++
++	regs->d0 = -EINTR;
++	while (1) {
++		current->state = TASK_INTERRUPTIBLE;
++		schedule();
++		if (do_signal(&saveset, regs))
++			return -EINTR;
++	}
++}
++
++asmlinkage int
++do_rt_sigsuspend(struct pt_regs *regs)
++{
++	sigset_t __user *unewset = (sigset_t __user *)regs->d1;
++	size_t sigsetsize = (size_t)regs->d2;
++	sigset_t saveset, newset;
++
++	/* XXX: Don't preclude handling different sized sigset_t's.  */
++	if (sigsetsize != sizeof(sigset_t))
++		return -EINVAL;
++
++	if (copy_from_user(&newset, unewset, sizeof(newset)))
++		return -EFAULT;
++	sigdelsetmask(&newset, ~_BLOCKABLE);
++
++	spin_lock_irq(&current->sighand->siglock);
++	saveset = current->blocked;
++	current->blocked = newset;
++	recalc_sigpending();
++	spin_unlock_irq(&current->sighand->siglock);
++
++	regs->d0 = -EINTR;
++	while (1) {
++		current->state = TASK_INTERRUPTIBLE;
++		schedule();
++		if (do_signal(&saveset, regs))
++			return -EINTR;
++	}
++}
++
++asmlinkage int
++sys_sigaction(int sig, const struct old_sigaction __user *act,
++	      struct old_sigaction __user *oact)
++{
++	struct k_sigaction new_ka, old_ka;
++	int ret;
++
++	if (act) {
++		old_sigset_t mask;
++		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
++		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
++		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
++			return -EFAULT;
++		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
++		__get_user(mask, &act->sa_mask);
++		siginitset(&new_ka.sa.sa_mask, mask);
++	}
++
++	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
++
++	if (!ret && oact) {
++		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
++		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
++		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
++			return -EFAULT;
++		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
++		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
++	}
++
++	return ret;
++}
++
++asmlinkage int
++sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
++{
++	return do_sigaltstack(uss, uoss, rdusp());
++}
++
++
++/*
++ * Do a signal return; undo the signal stack.
++ *
++ * Keep the return code on the stack quadword aligned!
++ * That makes the cache flush below easier.
++ */
++
++struct sigframe
++{
++	char __user *pretcode;
++	int sig;
++	int code;
++	struct sigcontext __user *psc;
++	char retcode[16];
++	unsigned long extramask[_NSIG_WORDS-1];
++	struct sigcontext sc;
++};
++
++struct rt_sigframe
++{
++	char __user *pretcode;
++	int sig;
++	struct siginfo __user *pinfo;
++	void __user *puc;
++	char retcode[16];
++	struct siginfo info;
++	struct ucontext uc;
++};
++
++#define FPCONTEXT_SIZE	216
++#define uc_fpstate	uc_filler[0]
++#define uc_formatvec	uc_filler[FPCONTEXT_SIZE/4]
++#define uc_extra	uc_filler[FPCONTEXT_SIZE/4+1]
++
++#ifdef CONFIG_FPU
++static unsigned char fpu_version; /* version num of fpu, set by setup_frame */
++
++static inline int restore_fpu_state(struct sigcontext *sc)
++{
++	int err = 1;
++
++	if (FPU_IS_EMU) {
++	    /* restore registers */
++	    memcpy(current->thread.fpcntl, sc->sc_fpcntl, 12);
++	    memcpy(current->thread.fp, sc->sc_fpregs, 24);
++	    return 0;
++	}
++
++	if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) {
++	    /* Verify the frame format.  */
++	    if (!CPU_IS_060 && (sc->sc_fpstate[0] != fpu_version))
++		goto out;
++	    if (CPU_IS_020_OR_030) {
++		if (m68k_fputype & FPU_68881 &&
++		    !(sc->sc_fpstate[1] == 0x18 || sc->sc_fpstate[1] == 0xb4))
++		    goto out;
++		if (m68k_fputype & FPU_68882 &&
++		    !(sc->sc_fpstate[1] == 0x38 || sc->sc_fpstate[1] == 0xd4))
++		    goto out;
++	    } else if (CPU_IS_040) {
++		if (!(sc->sc_fpstate[1] == 0x00 ||
++		      sc->sc_fpstate[1] == 0x28 ||
++		      sc->sc_fpstate[1] == 0x60))
++		    goto out;
++	    } else if (CPU_IS_060) {
++		if (!(sc->sc_fpstate[3] == 0x00 ||
++		      sc->sc_fpstate[3] == 0x60 ||
++		      sc->sc_fpstate[3] == 0xe0))
++		    goto out;
++	    } else
++		goto out;
++
++	}
++	err = 0;
++
++out:
++	return err;
++}
++
++static inline int rt_restore_fpu_state(struct ucontext __user *uc)
++{
++	unsigned char fpstate[FPCONTEXT_SIZE];
++	int context_size = CPU_IS_060 ? 8 : 0;
++	fpregset_t fpregs;
++	int err = 1;
++
++	if (FPU_IS_EMU) {
++		/* restore fpu control register */
++		if (__copy_from_user(current->thread.fpcntl,
++				uc->uc_mcontext.fpregs.f_fpcntl, 12))
++			goto out;
++		/* restore all other fpu register */
++		if (__copy_from_user(current->thread.fp,
++				uc->uc_mcontext.fpregs.f_fpregs, 96))
++			goto out;
++		return 0;
++	}
++
++	if (__get_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate))
++		goto out;
++	if (CPU_IS_060 ? fpstate[2] : fpstate[0]) {
++		if (!CPU_IS_060)
++			context_size = fpstate[1];
++		/* Verify the frame format.  */
++		if (!CPU_IS_060 && (fpstate[0] != fpu_version))
++			goto out;
++		if (CPU_IS_020_OR_030) {
++			if (m68k_fputype & FPU_68881 &&
++			    !(context_size == 0x18 || context_size == 0xb4))
++				goto out;
++			if (m68k_fputype & FPU_68882 &&
++			    !(context_size == 0x38 || context_size == 0xd4))
++				goto out;
++		} else if (CPU_IS_040) {
++			if (!(context_size == 0x00 ||
++			      context_size == 0x28 ||
++			      context_size == 0x60))
++				goto out;
++		} else if (CPU_IS_060) {
++			if (!(fpstate[3] == 0x00 ||
++			      fpstate[3] == 0x60 ||
++			      fpstate[3] == 0xe0))
++				goto out;
++		} else
++			goto out;
++		if (__copy_from_user(&fpregs, &uc->uc_mcontext.fpregs,
++				     sizeof(fpregs)))
++			goto out;
++	}
++	if (context_size &&
++	    __copy_from_user(fpstate + 4, (long __user *)&uc->uc_fpstate + 1,
++			     context_size))
++		goto out;
++	err = 0;
++
++out:
++	return err;
++}
++#endif
++
++static inline int
++restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *usc,
++	void __user *fp, int *pd0)
++{
++	int fsize, formatvec;
++	struct sigcontext context;
++	int err = 0;
++
++	/* get previous context */
++	if (copy_from_user(&context, usc, sizeof(context)))
++		goto badframe;
++
++	/* restore passed registers */
++	regs->d1 = context.sc_d1;
++	regs->a0 = context.sc_a0;
++	regs->a1 = context.sc_a1;
++	regs->sr = (regs->sr & 0xff00) | (context.sc_sr & 0xff);
++	regs->pc = context.sc_pc;
++	regs->orig_d0 = -1;		/* disable syscall checks */
++	wrusp(context.sc_usp);
++	formatvec = context.sc_formatvec;
++	regs->format = formatvec >> 12;
++	regs->vector = formatvec & 0xfff;
++
++#ifdef CONFIG_FPU
++	err = restore_fpu_state(&context);
++#endif
++
++	fsize = frame_extra_sizes[regs->format];
++	if (fsize < 0) {
++		/*
++		 * user process trying to return with weird frame format
++		 */
++#ifdef DEBUG
++		printk(KERN_DEBUG "user process returning with weird \
++			frame format\n");
++#endif
++		goto badframe;
++	}
++
++	/* OK.	Make room on the supervisor stack for the extra junk,
++	 * if necessary.
++	 */
++
++	{
++		struct switch_stack *sw = (struct switch_stack *)regs - 1;
++		regs->d0 = context.sc_d0;
++#define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack))
++		__asm__ __volatile__
++			("   movel %0,%/sp\n\t"
++			 "   bra ret_from_signal\n"
++			 "4:\n"
++			 ".section __ex_table,\"a\"\n"
++			 "   .align 4\n"
++			 "   .long 2b,4b\n"
++			 ".previous"
++			 : /* no outputs, it doesn't ever return */
++			 : "a" (sw), "d" (fsize), "d" (frame_offset/4-1),
++			   "n" (frame_offset), "a" (fp)
++			 : "a0");
++#undef frame_offset
++		/*
++		 * If we ever get here an exception occurred while
++		 * building the above stack-frame.
++		 */
++		goto badframe;
++	}
++
++	*pd0 = context.sc_d0;
++	return err;
++
++badframe:
++	return 1;
++}
++
++static inline int
++rt_restore_ucontext(struct pt_regs *regs, struct switch_stack *sw,
++		    struct ucontext __user *uc, int *pd0)
++{
++	int fsize, temp;
++	greg_t __user *gregs = uc->uc_mcontext.gregs;
++	unsigned long usp;
++	int err;
++
++	err = __get_user(temp, &uc->uc_mcontext.version);
++	if (temp != MCONTEXT_VERSION)
++		goto badframe;
++	/* restore passed registers */
++	err |= __get_user(regs->d0, &gregs[0]);
++	err |= __get_user(regs->d1, &gregs[1]);
++	err |= __get_user(regs->d2, &gregs[2]);
++	err |= __get_user(regs->d3, &gregs[3]);
++	err |= __get_user(regs->d4, &gregs[4]);
++	err |= __get_user(regs->d5, &gregs[5]);
++	err |= __get_user(sw->d6, &gregs[6]);
++	err |= __get_user(sw->d7, &gregs[7]);
++	err |= __get_user(regs->a0, &gregs[8]);
++	err |= __get_user(regs->a1, &gregs[9]);
++	err |= __get_user(regs->a2, &gregs[10]);
++	err |= __get_user(sw->a3, &gregs[11]);
++	err |= __get_user(sw->a4, &gregs[12]);
++	err |= __get_user(sw->a5, &gregs[13]);
++	err |= __get_user(sw->a6, &gregs[14]);
++	err |= __get_user(usp, &gregs[15]);
++	wrusp(usp);
++	err |= __get_user(regs->pc, &gregs[16]);
++	err |= __get_user(temp, &gregs[17]);
++	regs->sr = (regs->sr & 0xff00) | (temp & 0xff);
++	regs->orig_d0 = -1;		/* disable syscall checks */
++	err |= __get_user(temp, &uc->uc_formatvec);
++	regs->format = temp >> 12;
++	regs->vector = temp & 0xfff;
++
++#ifdef CONFIG_FPU
++	err |= rt_restore_fpu_state(uc);
++#endif
++
++	if (do_sigaltstack(&uc->uc_stack, NULL, usp) == -EFAULT)
++		goto badframe;
++
++	fsize = frame_extra_sizes[regs->format];
++	if (fsize < 0) {
++		/*
++		 * user process trying to return with weird frame format
++		 */
++#ifdef DEBUG
++		printk(KERN_DEBUG "user process returning with weird \
++			frame format\n");
++#endif
++		goto badframe;
++	}
++
++	/* OK.	Make room on the supervisor stack for the extra junk,
++	 * if necessary.
++	 */
++
++	{
++#define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack))
++		__asm__ __volatile__
++			("   movel %0,%/sp\n\t"
++			 "   bra ret_from_signal\n"
++			 "4:\n"
++			 ".section __ex_table,\"a\"\n"
++			 "   .align 4\n"
++			 "   .long 2b,4b\n"
++			 ".previous"
++			 : /* no outputs, it doesn't ever return */
++			 : "a" (sw), "d" (fsize), "d" (frame_offset/4-1),
++			   "n" (frame_offset), "a" (&uc->uc_extra)
++			 : "a0");
++#undef frame_offset
++		/*
++		 * If we ever get here an exception occurred while
++		 * building the above stack-frame.
++		 */
++		goto badframe;
++	}
++
++	*pd0 = regs->d0;
++	return err;
++
++badframe:
++	return 1;
++}
++
++asmlinkage int do_sigreturn(unsigned long __unused)
++{
++	struct switch_stack *sw = (struct switch_stack *) &__unused;
++	struct pt_regs *regs = (struct pt_regs *) (sw + 1);
++	unsigned long usp = rdusp();
++	struct sigframe __user *frame = (struct sigframe __user *)(usp - 4);
++	sigset_t set;
++	int d0;
++
++	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
++		goto badframe;
++	if (__get_user(set.sig[0], &frame->sc.sc_mask) ||
++	    (_NSIG_WORDS > 1 &&
++	     __copy_from_user(&set.sig[1], &frame->extramask,
++			      sizeof(frame->extramask))))
++		goto badframe;
++
++	sigdelsetmask(&set, ~_BLOCKABLE);
++	spin_lock_irq(&current->sighand->siglock);
++	current->blocked = set;
++	recalc_sigpending();
++	spin_unlock_irq(&current->sighand->siglock);
++
++	if (restore_sigcontext(regs, &frame->sc, frame + 1, &d0))
++		goto badframe;
++	return d0;
++
++badframe:
++	force_sig(SIGSEGV, current);
++	return 0;
++}
++
++asmlinkage int do_rt_sigreturn(unsigned long __unused)
++{
++	struct switch_stack *sw = (struct switch_stack *) &__unused;
++	struct pt_regs *regs = (struct pt_regs *) (sw + 1);
++	unsigned long usp = rdusp();
++	struct rt_sigframe __user *frame =
++		(struct rt_sigframe __user *)(usp - 4);
++	sigset_t set;
++	int d0;
++
++	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
++		goto badframe;
++	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
++		goto badframe;
++
++	sigdelsetmask(&set, ~_BLOCKABLE);
++	spin_lock_irq(&current->sighand->siglock);
++	current->blocked = set;
++	recalc_sigpending();
++	spin_unlock_irq(&current->sighand->siglock);
++
++	if (rt_restore_ucontext(regs, sw, &frame->uc, &d0))
++		goto badframe;
++	return d0;
++
++badframe:
++	force_sig(SIGSEGV, current);
++	return 0;
++}
++
++#ifdef CONFIG_FPU
++/*
++ * Set up a signal frame.
++ */
++
++static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs)
++{
++	if (FPU_IS_EMU) {
++		/* save registers */
++		memcpy(sc->sc_fpcntl, current->thread.fpcntl, 12);
++		memcpy(sc->sc_fpregs, current->thread.fp, 24);
++		return;
++	}
++}
++
++static inline int rt_save_fpu_state(struct ucontext __user *uc,
++	struct pt_regs *regs)
++{
++	int err = 0;
++
++	if (FPU_IS_EMU) {
++		/* save fpu control register */
++		err |= copy_to_user(uc->uc_mcontext.fpregs.f_fpcntl,
++				current->thread.fpcntl, 12);
++		/* save all other fpu register */
++		err |= copy_to_user(uc->uc_mcontext.fpregs.f_fpregs,
++				current->thread.fp, 96);
++		return err;
++	}
++
++	return err;
++}
++#endif
++
++static void setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
++			     unsigned long mask)
++{
++	sc->sc_mask = mask;
++	sc->sc_usp = rdusp();
++	sc->sc_d0 = regs->d0;
++	sc->sc_d1 = regs->d1;
++	sc->sc_a0 = regs->a0;
++	sc->sc_a1 = regs->a1;
++	sc->sc_sr = regs->sr;
++	sc->sc_pc = regs->pc;
++	sc->sc_formatvec = regs->format << 12 | regs->vector;
++#ifdef CONFIG_FPU
++	save_fpu_state(sc, regs);
++#endif
++}
++
++static inline int rt_setup_ucontext(struct ucontext __user *uc,
++	struct pt_regs *regs)
++{
++	struct switch_stack *sw = (struct switch_stack *)regs - 1;
++	greg_t __user *gregs = uc->uc_mcontext.gregs;
++	int err = 0;
++
++	err |= __put_user(MCONTEXT_VERSION, &uc->uc_mcontext.version);
++	err |= __put_user(regs->d0, &gregs[0]);
++	err |= __put_user(regs->d1, &gregs[1]);
++	err |= __put_user(regs->d2, &gregs[2]);
++	err |= __put_user(regs->d3, &gregs[3]);
++	err |= __put_user(regs->d4, &gregs[4]);
++	err |= __put_user(regs->d5, &gregs[5]);
++	err |= __put_user(sw->d6, &gregs[6]);
++	err |= __put_user(sw->d7, &gregs[7]);
++	err |= __put_user(regs->a0, &gregs[8]);
++	err |= __put_user(regs->a1, &gregs[9]);
++	err |= __put_user(regs->a2, &gregs[10]);
++	err |= __put_user(sw->a3, &gregs[11]);
++	err |= __put_user(sw->a4, &gregs[12]);
++	err |= __put_user(sw->a5, &gregs[13]);
++	err |= __put_user(sw->a6, &gregs[14]);
++	err |= __put_user(rdusp(), &gregs[15]);
++	err |= __put_user(regs->pc, &gregs[16]);
++	err |= __put_user(regs->sr, &gregs[17]);
++	err |= __put_user((regs->format << 12) | regs->vector,
++			  &uc->uc_formatvec);
++#ifdef CONFIG_FPU
++	err |= rt_save_fpu_state(uc, regs);
++#endif
++	return err;
++}
++
++extern void IcacheInvalidateCacheBlock(void *, unsigned long);
++static inline void push_cache(unsigned long vaddr)
++{
++	IcacheInvalidateCacheBlock((void *)vaddr, 8);
++}
++
++static inline void __user *
++get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
++{
++	unsigned long usp;
++
++	/* Default to using normal stack.  */
++	usp = rdusp();
++
++	/* This is the X/Open sanctioned signal stack switching.  */
++	if (ka->sa.sa_flags & SA_ONSTACK) {
++		if (!sas_ss_flags(usp))
++			usp = current->sas_ss_sp + current->sas_ss_size;
++	}
++	return (void __user *)((usp - frame_size) & -8UL);
++}
++
++static void setup_frame(int sig, struct k_sigaction *ka,
++			 sigset_t *set, struct pt_regs *regs)
++{
++	struct sigframe __user *frame;
++	int fsize = frame_extra_sizes[regs->format];
++	struct sigcontext context;
++	int err = 0;
++
++	if (fsize < 0) {
++#ifdef DEBUG
++		printk(KERN_DEBUG "setup_frame: Unknown frame format %#x\n",
++			regs->format);
++#endif
++		goto give_sigsegv;
++	}
++
++	frame = get_sigframe(ka, regs, sizeof(*frame));
++
++	err |= __put_user((current_thread_info()->exec_domain
++			&& current_thread_info()->exec_domain->signal_invmap
++			&& sig < 32
++			? current_thread_info()->exec_domain->signal_invmap[sig]
++			: sig),
++			&frame->sig);
++
++	err |= __put_user(regs->vector, &frame->code);
++	err |= __put_user(&frame->sc, &frame->psc);
++
++	if (_NSIG_WORDS > 1)
++		err |= copy_to_user(frame->extramask, &set->sig[1],
++				    sizeof(frame->extramask));
++
++	setup_sigcontext(&context, regs, set->sig[0]);
++	err |= copy_to_user(&frame->sc, &context, sizeof(context));
++
++	/* Set up to return from userspace.  */
++	err |= __put_user(frame->retcode, &frame->pretcode);
++	/* moveq #,d0; trap #0 */
++	err |= __put_user(0x70004e40 + (__NR_sigreturn << 16),
++			  (long __user *)(frame->retcode));
++
++	if (err)
++		goto give_sigsegv;
++
++	push_cache((unsigned long) &frame->retcode);
++
++	/* Set up registers for signal handler */
++	wrusp((unsigned long) frame);
++	regs->pc = (unsigned long) ka->sa.sa_handler;
++
++adjust_stack:
++	/* Prepare to skip over the extra stuff in the exception frame.  */
++	if (regs->stkadj) {
++		struct pt_regs *tregs =
++			(struct pt_regs *)((ulong)regs + regs->stkadj);
++#ifdef DEBUG
++		printk(KERN_DEBUG "Performing stackadjust=%04x\n",
++			regs->stkadj);
++#endif
++		/* This must be copied with decreasing addresses to
++		   handle overlaps.  */
++		tregs->vector = 0;
++		tregs->format = 0;
++		tregs->pc = regs->pc;
++		tregs->sr = regs->sr;
++	}
++	return;
++
++give_sigsegv:
++	force_sigsegv(sig, current);
++	goto adjust_stack;
++}
++
++static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
++	sigset_t *set, struct pt_regs *regs)
++{
++	struct rt_sigframe __user *frame;
++	int fsize = frame_extra_sizes[regs->format];
++	int err = 0;
++
++	if (fsize < 0) {
++#ifdef DEBUG
++		printk(KERN_DEBUG "setup_frame: Unknown frame format %#x\n",
++			regs->format);
++#endif
++		goto give_sigsegv;
++	}
++
++	frame = get_sigframe(ka, regs, sizeof(*frame));
++
++	if (fsize) {
++		err |= copy_to_user(&frame->uc.uc_extra, regs + 1, fsize);
++		regs->stkadj = fsize;
++	}
++
++	err |= __put_user((current_thread_info()->exec_domain
++			&& current_thread_info()->exec_domain->signal_invmap
++			&& sig < 32
++			? current_thread_info()->exec_domain->signal_invmap[sig]
++			: sig),
++			&frame->sig);
++	err |= __put_user(&frame->info, &frame->pinfo);
++	err |= __put_user(&frame->uc, &frame->puc);
++	err |= copy_siginfo_to_user(&frame->info, info);
++
++	/* Create the ucontext.  */
++	err |= __put_user(0, &frame->uc.uc_flags);
++	err |= __put_user(NULL, &frame->uc.uc_link);
++	err |= __put_user((void __user *)current->sas_ss_sp,
++			  &frame->uc.uc_stack.ss_sp);
++	err |= __put_user(sas_ss_flags(rdusp()),
++			  &frame->uc.uc_stack.ss_flags);
++	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
++	err |= rt_setup_ucontext(&frame->uc, regs);
++	err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
++
++	/* Set up to return from userspace.  */
++	err |= __put_user(frame->retcode, &frame->pretcode);
++
++	/* moveq #,d0; andi.l #,D0; trap #0 */
++	err |= __put_user(0x70AD0280, (long *)(frame->retcode + 0));
++	err |= __put_user(0x000000ff, (long *)(frame->retcode + 4));
++	err |= __put_user(0x4e400000, (long *)(frame->retcode + 8));
++
++	if (err)
++		goto give_sigsegv;
++
++	push_cache((unsigned long) &frame->retcode);
++
++	/* Set up registers for signal handler */
++	wrusp((unsigned long) frame);
++	regs->pc = (unsigned long) ka->sa.sa_handler;
++
++adjust_stack:
++	/* Prepare to skip over the extra stuff in the exception frame.  */
++	if (regs->stkadj) {
++		struct pt_regs *tregs =
++			(struct pt_regs *)((ulong)regs + regs->stkadj);
++#ifdef DEBUG
++		printk(KERN_DEBUG "Performing stackadjust=%04x\n",
++			regs->stkadj);
++#endif
++		/* This must be copied with decreasing addresses to
++		   handle overlaps.  */
++		tregs->vector = 0;
++		tregs->format = 0;
++		tregs->pc = regs->pc;
++		tregs->sr = regs->sr;
++	}
++	return;
++
++give_sigsegv:
++	force_sigsegv(sig, current);
++	goto adjust_stack;
++}
++
++static inline void
++handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
++{
++	switch (regs->d0) {
++	case -ERESTARTNOHAND:
++		if (!has_handler)
++			goto do_restart;
++		regs->d0 = -EINTR;
++		break;
++
++	case -ERESTARTSYS:
++		if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
++			regs->d0 = -EINTR;
++			break;
++		}
++	/* fallthrough */
++	case -ERESTARTNOINTR:
++do_restart:
++		regs->d0 = regs->orig_d0;
++		regs->pc -= 2;
++		break;
++	}
++}
++
++/*
++ * OK, we're invoking a handler
++ */
++static void
++handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
++	      sigset_t *oldset, struct pt_regs *regs)
++{
++	/* are we from a system call? */
++	if (regs->orig_d0 >= 0)
++		/* If so, check system call restarting.. */
++		handle_restart(regs, ka, 1);
++
++	/* set up the stack frame */
++	if (ka->sa.sa_flags & SA_SIGINFO)
++		setup_rt_frame(sig, ka, info, oldset, regs);
++	else
++		setup_frame(sig, ka, oldset, regs);
++
++	if (ka->sa.sa_flags & SA_ONESHOT)
++		ka->sa.sa_handler = SIG_DFL;
++
++	spin_lock_irq(&current->sighand->siglock);
++	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
++	if (!(ka->sa.sa_flags & SA_NODEFER))
++		sigaddset(&current->blocked, sig);
++	recalc_sigpending();
++	spin_unlock_irq(&current->sighand->siglock);
++}
++
++/*
++ * Note that 'init' is a special process: it doesn't get signals it doesn't
++ * want to handle. Thus you cannot kill init even with a SIGKILL even by
++ * mistake.
++ */
++asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs)
++{
++	siginfo_t info;
++	struct k_sigaction ka;
++	int signr;
++
++	current->thread.esp0 = (unsigned long) regs;
++
++	if (!oldset)
++		oldset = &current->blocked;
++
++	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
++	if (signr > 0) {
++		/* Whee!  Actually deliver the signal.  */
++		handle_signal(signr, &ka, &info, oldset, regs);
++		return 1;
++	}
++
++	/* Did we come from a system call? */
++	if (regs->orig_d0 >= 0)
++		/* Restart the system call - no handlers present */
++		handle_restart(regs, NULL, 0);
++
++	return 0;
++}
+--- /dev/null
++++ b/arch/m68k/coldfire/traps.c
+@@ -0,0 +1,454 @@
++/*
++ *  linux/arch/m68knommu/kernel/traps.c
++ *
++ *  Copyright (C) 1993, 1994 by Hamish Macdonald
++ *
++ *  68040 fixes by Michael Rausch
++ *  68040 fixes by Martin Apel
++ *  68060 fixes by Roman Hodek
++ *  68060 fixes by Jesper Skov
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ */
++
++/*
++ * Sets up all exception vectors
++ */
++#include <linux/sched.h>
++#include <linux/signal.h>
++#include <linux/kernel.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/a.out.h>
++#include <linux/user.h>
++#include <linux/string.h>
++#include <linux/linkage.h>
++#include <linux/init.h>
++#include <linux/ptrace.h>
++#include <linux/kallsyms.h>
++
++#include <asm/setup.h>
++#include <asm/fpu.h>
++#include <asm/system.h>
++#include <asm/uaccess.h>
++#include <asm/traps.h>
++#include <asm/pgtable.h>
++#include <asm/machdep.h>
++#include <asm/siginfo.h>
++
++static char const * const vec_names[] = {
++	"RESET SP", "RESET PC", "BUS ERROR", "ADDRESS ERROR",
++	"ILLEGAL INSTRUCTION", "ZERO DIVIDE", "CHK", "TRAPcc",
++	"PRIVILEGE VIOLATION", "TRACE", "LINE 1010", "LINE 1111",
++	"UNASSIGNED RESERVED 12", "COPROCESSOR PROTOCOL VIOLATION",
++	"FORMAT ERROR", "UNINITIALIZED INTERRUPT",
++	"UNASSIGNED RESERVED 16", "UNASSIGNED RESERVED 17",
++	"UNASSIGNED RESERVED 18", "UNASSIGNED RESERVED 19",
++	"UNASSIGNED RESERVED 20", "UNASSIGNED RESERVED 21",
++	"UNASSIGNED RESERVED 22", "UNASSIGNED RESERVED 23",
++	"SPURIOUS INTERRUPT", "LEVEL 1 INT", "LEVEL 2 INT", "LEVEL 3 INT",
++	"LEVEL 4 INT", "LEVEL 5 INT", "LEVEL 6 INT", "LEVEL 7 INT",
++	"SYSCALL", "TRAP #1", "TRAP #2", "TRAP #3",
++	"TRAP #4", "TRAP #5", "TRAP #6", "TRAP #7",
++	"TRAP #8", "TRAP #9", "TRAP #10", "TRAP #11",
++	"TRAP #12", "TRAP #13", "TRAP #14", "TRAP #15",
++	"FPCP BSUN", "FPCP INEXACT", "FPCP DIV BY 0", "FPCP UNDERFLOW",
++	"FPCP OPERAND ERROR", "FPCP OVERFLOW", "FPCP SNAN",
++	"FPCP UNSUPPORTED OPERATION",
++	"MMU CONFIGURATION ERROR"
++};
++
++asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
++			     unsigned long error_code);
++asmlinkage void trap_c(struct frame *fp);
++extern void __init coldfire_trap_init(void);
++
++void __init trap_init(void)
++{
++	coldfire_trap_init();
++}
++
++/* The following table converts the FS encoding of a ColdFire
++   exception stack frame into the error_code value needed by
++   do_fault. */
++
++static const unsigned char fs_err_code[] = {
++	0,  /* 0000 */
++	0,  /* 0001 */
++	0,  /* 0010 */
++	0,  /* 0011 */
++	1,  /* 0100 */
++	0,  /* 0101 */
++	0,  /* 0110 */
++	0,  /* 0111 */
++	2,  /* 1000 */
++	3,  /* 1001 */
++	2,  /* 1010 */
++	0,  /* 1011 */
++	1,  /* 1100 */
++	1,  /* 1101 */
++	0,  /* 1110 */
++	0   /* 1111 */
++};
++
++#ifdef DEBUG
++static const char *fs_err_msg[16] = {
++	"Normal",
++	"Reserved",
++	"Interrupt during debug service routine",
++	"Reserved",
++	"X Protection",
++	"TLB X miss (opword)",
++	"TLB X miss (ext. word)",
++	"IFP in emulator mode",
++	"W Protection",
++	"Write error",
++	"TLB W miss",
++	"Reserved",
++	"R Protection",
++	"R/RMW Protection",
++	"TLB R miss",
++	"OEP in emulator mode",
++};
++#endif
++
++static inline void access_errorCF(struct frame *fp)
++{
++	unsigned long int mmusr, complainingAddress;
++	unsigned int err_code, fs;
++	int need_page_fault;
++
++	mmusr = fp->ptregs.mmusr;
++	complainingAddress = fp->ptregs.mmuar;
++#ifdef DEBUG
++	printk(KERN_DEBUG "pc %#lx, mmusr %#lx, complainingAddress %#lx\n", \
++		fp->ptregs.pc, mmusr, complainingAddress);
++#endif
++
++	/*
++	 * error_code:
++	 *	bit 0 == 0 means no page found, 1 means protection fault
++	 *	bit 1 == 0 means read, 1 means write
++	 */
++
++	fs = (fp->ptregs.fs2 << 2) | fp->ptregs.fs1;
++	switch (fs) {
++	case  5:  /* 0101 TLB opword X miss */
++		need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 0);
++		complainingAddress = fp->ptregs.pc;
++		break;
++	case  6:  /* 0110 TLB extension word X miss */
++		need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 1);
++		complainingAddress = fp->ptregs.pc + sizeof(long);
++		break;
++	case 10:  /* 1010 TLB W miss */
++		need_page_fault = cf_tlb_miss(&fp->ptregs, 1, 1, 0);
++		break;
++	case 14: /* 1110 TLB R miss */
++		need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 1, 0);
++		break;
++	default:
++		/* 0000 Normal  */
++		/* 0001 Reserved */
++		/* 0010 Interrupt during debug service routine */
++		/* 0011 Reserved */
++		/* 0100 X Protection */
++		/* 0111 IFP in emulator mode */
++		/* 1000 W Protection*/
++		/* 1001 Write error*/
++		/* 1011 Reserved*/
++		/* 1100 R Protection*/
++		/* 1101 R Protection*/
++		/* 1111 OEP in emulator mode*/
++		need_page_fault = 1;
++		break;
++	}
++
++	if (need_page_fault) {
++		err_code = fs_err_code[fs];
++		if ((fs == 13) && (mmusr & MMUSR_WF)) /* rd-mod-wr access */
++			err_code |= 2; /* bit1 - write, bit0 - protection */
++		do_page_fault(&fp->ptregs, complainingAddress, err_code);
++	}
++}
++
++void die_if_kernel(char *str, struct pt_regs *fp, int nr)
++{
++	if (!(fp->sr & PS_S))
++		return;
++
++	console_verbose();
++	printk(KERN_EMERG "%s: %08x\n", str, nr);
++	printk(KERN_EMERG "PC: [<%08lx>]", fp->pc);
++	print_symbol(" %s", fp->pc);
++	printk(KERN_EMERG "\nSR: %04x  SP: %p  a2: %08lx\n",
++	       fp->sr, fp, fp->a2);
++	printk(KERN_EMERG "d0: %08lx    d1: %08lx    d2: %08lx    d3: %08lx\n",
++	       fp->d0, fp->d1, fp->d2, fp->d3);
++	printk(KERN_EMERG "d4: %08lx    d5: %08lx    a0: %08lx    a1: %08lx\n",
++	       fp->d4, fp->d5, fp->a0, fp->a1);
++
++	printk(KERN_EMERG "Process %s (pid: %d, stackpage=%08lx)\n",
++		current->comm, current->pid, PAGE_SIZE+(unsigned long)current);
++	show_stack(NULL, (unsigned long *)fp);
++	do_exit(SIGSEGV);
++}
++
++asmlinkage void buserr_c(struct frame *fp)
++{
++	unsigned int fs;
++
++	/* Only set esp0 if coming from user mode */
++	if (user_mode(&fp->ptregs))
++		current->thread.esp0 = (unsigned long) fp;
++
++	fs = (fp->ptregs.fs2 << 2) | fp->ptregs.fs1;
++#if defined(DEBUG)
++	printk(KERN_DEBUG "*** Bus Error *** (%x)%s\n", fs,
++		fs_err_msg[fs & 0xf]);
++#endif
++	switch (fs) {
++	case 0x5:
++	case 0x6:
++	case 0x7:
++	case 0x9:
++	case 0xa:
++	case 0xd:
++	case 0xe:
++	case 0xf:
++		access_errorCF(fp);
++		break;
++	default:
++		die_if_kernel("bad frame format", &fp->ptregs, 0);
++#if defined(DEBUG)
++		printk(KERN_DEBUG "Unknown SIGSEGV - 4\n");
++#endif
++		force_sig(SIGSEGV, current);
++	}
++}
++
++
++int kstack_depth_to_print = 48;
++
++void show_stack(struct task_struct *task, unsigned long *stack)
++{
++	unsigned long *endstack, addr, symaddr;
++	extern char _start, _etext;
++	int i;
++
++	if (!stack) {
++		if (task)
++			stack = (unsigned long *)task->thread.ksp;
++		else
++			stack = (unsigned long *)&stack;
++	}
++
++	addr = (unsigned long) stack;
++	endstack = (unsigned long *) PAGE_ALIGN(addr);
++
++	printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack);
++	for (i = 0; i < kstack_depth_to_print; i++) {
++		if (stack + 1 > endstack)
++			break;
++		if (i % 8 == 0)
++			printk("\n" KERN_EMERG "       ");
++		symaddr = *stack;
++		printk(KERN_EMERG " %08lx", *stack++);
++		if ((symaddr >= 0xc0000000) && (symaddr < 0xc1000000))
++			print_symbol("(%s)", symaddr);
++	}
++	printk("\n");
++
++	printk(KERN_EMERG "Call Trace:");
++	i = 0;
++	while (stack + 1 <= endstack) {
++		addr = *stack++;
++		/*
++		 * If the address is either in the text segment of the
++		 * kernel, or in the region which contains vmalloc'ed
++		 * memory, it *may* be the address of a calling
++		 * routine; if so, print it so that someone tracing
++		 * down the cause of the crash will be able to figure
++		 * out the call path that was taken.
++		 */
++		if (((addr >= (unsigned long) &_start) &&
++		     (addr <= (unsigned long) &_etext))) {
++			if (i % 4 == 0)
++				printk("\n" KERN_EMERG "       ");
++			printk(KERN_EMERG " [<%08lx>]", addr);
++			i++;
++		}
++	}
++	printk("\n");
++}
++
++void bad_super_trap(struct frame *fp)
++{
++	console_verbose();
++	if (fp->ptregs.vector < 4*sizeof(vec_names)/sizeof(vec_names[0]))
++		printk(KERN_WARNING "*** %s ***   FORMAT=%X\n",
++			vec_names[(fp->ptregs.vector) >> 2],
++			fp->ptregs.format);
++	else
++		printk(KERN_WARNING "*** Exception %d ***   FORMAT=%X\n",
++			(fp->ptregs.vector) >> 2,
++			fp->ptregs.format);
++	printk(KERN_WARNING "Current process id is %d\n", current->pid);
++	die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0);
++}
++
++asmlinkage void trap_c(struct frame *fp)
++{
++	int sig;
++	siginfo_t info;
++
++	if (fp->ptregs.sr & PS_S) {
++		if ((fp->ptregs.vector >> 2) == VEC_TRACE) {
++			/* traced a trapping instruction */
++			current->ptrace |= PT_DTRACE;
++		} else
++			bad_super_trap(fp);
++		return;
++	}
++
++	/* send the appropriate signal to the user program */
++	switch ((fp->ptregs.vector) >> 2) {
++	case VEC_ADDRERR:
++		info.si_code = BUS_ADRALN;
++		sig = SIGBUS;
++		break;
++	case VEC_ILLEGAL:
++	case VEC_LINE10:
++	case VEC_LINE11:
++		info.si_code = ILL_ILLOPC;
++		sig = SIGILL;
++		break;
++	case VEC_PRIV:
++		info.si_code = ILL_PRVOPC;
++		sig = SIGILL;
++		break;
++	case VEC_COPROC:
++		info.si_code = ILL_COPROC;
++		sig = SIGILL;
++		break;
++	case VEC_TRAP1: /* gdbserver breakpoint */
++		fp->ptregs.pc -= 2;
++		info.si_code = TRAP_TRACE;
++		sig = SIGTRAP;
++		break;
++	case VEC_TRAP2:
++	case VEC_TRAP3:
++	case VEC_TRAP4:
++	case VEC_TRAP5:
++	case VEC_TRAP6:
++	case VEC_TRAP7:
++	case VEC_TRAP8:
++	case VEC_TRAP9:
++	case VEC_TRAP10:
++	case VEC_TRAP11:
++	case VEC_TRAP12:
++	case VEC_TRAP13:
++	case VEC_TRAP14:
++		info.si_code = ILL_ILLTRP;
++		sig = SIGILL;
++		break;
++	case VEC_FPBRUC:
++	case VEC_FPOE:
++	case VEC_FPNAN:
++		info.si_code = FPE_FLTINV;
++		sig = SIGFPE;
++		break;
++	case VEC_FPIR:
++		info.si_code = FPE_FLTRES;
++		sig = SIGFPE;
++		break;
++	case VEC_FPDIVZ:
++		info.si_code = FPE_FLTDIV;
++		sig = SIGFPE;
++		break;
++	case VEC_FPUNDER:
++		info.si_code = FPE_FLTUND;
++		sig = SIGFPE;
++		break;
++	case VEC_FPOVER:
++		info.si_code = FPE_FLTOVF;
++		sig = SIGFPE;
++		break;
++	case VEC_ZERODIV:
++		info.si_code = FPE_INTDIV;
++		sig = SIGFPE;
++		break;
++	case VEC_CHK:
++	case VEC_TRAP:
++		info.si_code = FPE_INTOVF;
++		sig = SIGFPE;
++		break;
++	case VEC_TRACE:		/* ptrace single step */
++		info.si_code = TRAP_TRACE;
++		sig = SIGTRAP;
++		break;
++	case VEC_TRAP15:		/* breakpoint */
++		info.si_code = TRAP_BRKPT;
++		sig = SIGTRAP;
++		break;
++	default:
++		info.si_code = ILL_ILLOPC;
++		sig = SIGILL;
++		break;
++	}
++	info.si_signo = sig;
++	info.si_errno = 0;
++	switch (fp->ptregs.format) {
++	default:
++		info.si_addr = (void *) fp->ptregs.pc;
++		break;
++	case 2:
++		info.si_addr = (void *) fp->un.fmt2.iaddr;
++		break;
++	case 7:
++		info.si_addr = (void *) fp->un.fmt7.effaddr;
++		break;
++	case 9:
++		info.si_addr = (void *) fp->un.fmt9.iaddr;
++		break;
++	case 10:
++		info.si_addr = (void *) fp->un.fmta.daddr;
++		break;
++	case 11:
++		info.si_addr = (void *) fp->un.fmtb.daddr;
++		break;
++	}
++	force_sig_info(sig, &info, current);
++}
++
++asmlinkage void set_esp0(unsigned long ssp)
++{
++	current->thread.esp0 = ssp;
++}
++
++/*
++ * The architecture-independent backtrace generator
++ */
++void dump_stack(void)
++{
++	unsigned long stack;
++
++	show_stack(current, &stack);
++}
++EXPORT_SYMBOL(dump_stack);
++
++#ifdef CONFIG_M68KFPU_EMU
++asmlinkage void fpemu_signal(int signal, int code, void *addr)
++{
++	siginfo_t info;
++
++	info.si_signo = signal;
++	info.si_errno = 0;
++	info.si_code = code;
++	info.si_addr = addr;
++	force_sig_info(signal, &info, current);
++}
++#endif
+--- /dev/null
++++ b/arch/m68k/coldfire/vmlinux-cf.lds
+@@ -0,0 +1,92 @@
++/* ld script to make m68k Coldfire Linux kernel */
++
++#include <asm-generic/vmlinux.lds.h>
++
++OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
++OUTPUT_ARCH(m68k)
++ENTRY(_start)
++jiffies = jiffies_64 + 4;
++SECTIONS
++{
++  . = 0xC0020000;
++  _text = .;			/* Text and read-only data */
++  .text : {
++	*(.text.head)
++	TEXT_TEXT
++	SCHED_TEXT
++	LOCK_TEXT
++	*(.fixup)
++	*(.gnu.warning)
++	} :text = 0x4e75
++
++  _etext = .;			/* End of text section */
++
++  . = ALIGN(16);
++  __start___ex_table = .;
++  __ex_table : { *(__ex_table) }
++  __stop___ex_table = .;
++
++  RODATA
++
++  .data : {			/* Data */
++	DATA_DATA
++	CONSTRUCTORS
++	}
++
++  .bss : { *(.bss) }		/* BSS */
++
++  . = ALIGN(16);
++  .data.cacheline_aligned : { *(.data.cacheline_aligned) } :data
++
++  _edata = .;			/* End of data section */
++
++  . = ALIGN(8192);		/* Initrd */
++  __init_begin = .;
++  .init.text : {
++	_sinittext = .;
++	*(.init.text)
++	_einittext = .;
++  }
++  .init.data : { *(.init.data) }
++  . = ALIGN(16);
++  __setup_start = .;
++  .init.setup : { *(.init.setup) }
++  __setup_end = .;
++  __initcall_start = .;
++  .initcall.init : {
++	INITCALLS
++  }
++  __initcall_end = .;
++  __con_initcall_start = .;
++  .con_initcall.init : { *(.con_initcall.init) }
++  __con_initcall_end = .;
++  SECURITY_INIT
++#ifdef CONFIG_BLK_DEV_INITRD
++  . = ALIGN(8192);
++  __initramfs_start = .;
++  .init.ramfs : { *(.init.ramfs) }
++  __initramfs_end = .;
++#endif
++  . = ALIGN(8192);
++  __init_end = .;
++
++  .data.init_task : { *(.data.init_task) }	/* The initial task and kernel stack */
++
++  _end = . ;
++
++  /* Sections to be discarded */
++  /DISCARD/ : {
++	*(.exit.text)
++	*(.exit.data)
++	*(.exitcall.exit)
++	}
++
++  /* Stabs debugging sections.  */
++  .stab 0 : { *(.stab) }
++  .stabstr 0 : { *(.stabstr) }
++  .stab.excl 0 : { *(.stab.excl) }
++  .stab.exclstr 0 : { *(.stab.exclstr) }
++  .stab.index 0 : { *(.stab.index) }
++  .stab.indexstr 0 : { *(.stab.indexstr) }
++  .comment 0 : { *(.comment) }
++}
diff --git a/target/linux/coldfire/patches/009-m5445x_serial.patch b/target/linux/coldfire/patches/009-m5445x_serial.patch
new file mode 100644
index 0000000000..351ea8a12d
--- /dev/null
+++ b/target/linux/coldfire/patches/009-m5445x_serial.patch
@@ -0,0 +1,73 @@
+From 4b5a534c16325217c05a87938885c0ee1fe69a34 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 31 Oct 2007 17:01:41 -0600
+Subject: [PATCH] MCF5445x core serial support.
+
+LTIBName: m5445x-serial
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/serial/mcfserial.c |   23 +++++++++++++++++++++--
+ 1 files changed, 21 insertions(+), 2 deletions(-)
+
+--- a/drivers/serial/mcfserial.c
++++ b/drivers/serial/mcfserial.c
+@@ -45,7 +45,9 @@
+ #include <asm/coldfire.h>
+ #include <asm/mcfsim.h>
+ #include <asm/mcfuart.h>
++#ifdef CONFIG_NETtel
+ #include <asm/nettel.h>
++#endif
+ #include <asm/uaccess.h>
+ #include "mcfserial.h"
+ 
+@@ -61,7 +63,8 @@ struct timer_list mcfrs_timer_struct;
+ #define	CONSOLE_BAUD_RATE	38400
+ #define	DEFAULT_CBAUD		B38400
+ #elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \
+-      defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO)
++      defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO) || \
++      defined(CONFIG_M54455)
+ #define CONSOLE_BAUD_RATE 	115200
+ #define DEFAULT_CBAUD		B115200
+ #elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
+@@ -94,7 +97,7 @@ static struct tty_driver *mcfrs_serial_d
+ #undef SERIAL_DEBUG_FLOW
+ 
+ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+-    defined(CONFIG_M520x) || defined(CONFIG_M532x)
++    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M54455)
+ #define	IRQBASE	(MCFINT_VECBASE+MCFINT_UART0)
+ #else
+ #define	IRQBASE	73
+@@ -1604,6 +1607,20 @@ static void mcfrs_irqinit(struct mcf_ser
+ 		/* GPIOs also must be initalized, depends on board */
+ 		break;
+ 	}
++#elif defined(CONFIG_M54455)
++	volatile unsigned char *uartp;
++	uartp = info->addr;
++	switch (info->line) {
++	case 0:
++		MCF_GPIO_PAR_UART |= 0x000F;
++		break;
++	case 1:
++		MCF_GPIO_PAR_UART |= 0x0FF0;
++		break;
++	case 2:
++		/* GPIOs also must be initalized, depends on board */
++		break;
++	}
+ #else
+ 	volatile unsigned char	*icrp, *uartp;
+ 
+@@ -1966,7 +1983,9 @@ struct console mcfrs_console = {
+ 
+ static int __init mcfrs_console_init(void)
+ {
++#ifndef CONFIG_M54455
+ 	register_console(&mcfrs_console);
++#endif
+ 	return 0;
+ }
+ 
diff --git a/target/linux/coldfire/patches/010-m5445x_fec.patch b/target/linux/coldfire/patches/010-m5445x_fec.patch
new file mode 100644
index 0000000000..0a87bd4cde
--- /dev/null
+++ b/target/linux/coldfire/patches/010-m5445x_fec.patch
@@ -0,0 +1,392 @@
+From c562ab80fe383e6fa49dbe38257421cf37f0e4b3 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 31 Oct 2007 17:07:25 -0600
+Subject: [PATCH] MCF5445x FEC support.
+
+LTIBName: m5445x-fec
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/net/Kconfig |    8 ++-
+ drivers/net/fec.c   |  207 ++++++++++++++++++++++++++++++++++++++++++++++----
+ drivers/net/fec.h   |    2 +-
+ 3 files changed, 198 insertions(+), 19 deletions(-)
+
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -1973,7 +1973,7 @@ config 68360_ENET
+ 
+ config FEC
+ 	bool "FEC ethernet controller (of ColdFire CPUs)"
+-	depends on M523x || M527x || M5272 || M528x || M520x
++	depends on M523x || M527x || M5272 || M528x || M520x || M54455
+ 	help
+ 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
+ 	  controller on some Motorola ColdFire processors.
+@@ -1985,6 +1985,12 @@ config FEC2
+ 	  Say Y here if you want to use the second built-in 10/100 Fast
+ 	  ethernet controller on some Motorola ColdFire processors.
+ 
++config FEC_SHARED_PHY
++	bool "Shared PHY interface(on some ColdFire designs)"
++	depends on FEC2
++	help
++	  Say Y here if both PHYs are controlled via a single channel.
++
+ config FEC_MPC52xx
+ 	tristate "MPC52xx FEC driver"
+ 	depends on PPC_MERGE && PPC_MPC52xx && PPC_BESTCOMM_FEC
+--- a/drivers/net/fec.c
++++ b/drivers/net/fec.c
+@@ -51,7 +51,9 @@
+ 
+ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
+     defined(CONFIG_M5272) || defined(CONFIG_M528x) || \
+-    defined(CONFIG_M520x) || defined(CONFIG_M532x)
++    defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
++    defined(CONFIG_M54455)
++
+ #include <asm/coldfire.h>
+ #include <asm/mcfsim.h>
+ #include "fec.h"
+@@ -82,6 +84,11 @@ static unsigned int fec_hw[] = {
+ 	(MCF_MBAR+0x30000),
+ #elif defined(CONFIG_M532x)
+ 	(MCF_MBAR+0xfc030000),
++#elif defined(CONFIG_M54455)
++	(MCF_MBAR+0xfc030000),
++#if defined(CONFIG_FEC2)
++	(MCF_MBAR+0xfc034000),
++#endif
+ #else
+ 	&(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec),
+ #endif
+@@ -172,7 +179,7 @@ typedef struct {
+  * account when setting it.
+  */
+ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+-    defined(CONFIG_M520x) || defined(CONFIG_M532x)
++    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M54455)
+ #define	OPT_FRAME_SIZE	(PKT_MAXBUF_SIZE << 16)
+ #else
+ #define	OPT_FRAME_SIZE	0
+@@ -213,6 +220,7 @@ struct fec_enet_private {
+ 	uint	phy_speed;
+ 	phy_info_t const	*phy;
+ 	struct work_struct phy_task;
++	volatile fec_t	*phy_hwp;
+ 
+ 	uint	sequence_done;
+ 	uint	mii_phy_task_queued;
+@@ -349,7 +357,8 @@ fec_enet_start_xmit(struct sk_buff *skb,
+ 	if (bdp->cbd_bufaddr & 0x3) {
+ 		unsigned int index;
+ 		index = bdp - fep->tx_bd_base;
+-		memcpy(fep->tx_bounce[index], (void *) bdp->cbd_bufaddr, bdp->cbd_datlen);
++		memcpy(fep->tx_bounce[index],
++		       (void *)skb->data, bdp->cbd_datlen);
+ 		bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]);
+ 	}
+ 
+@@ -702,7 +711,7 @@ fec_enet_mii(struct net_device *dev)
+ 	uint		mii_reg;
+ 
+ 	fep = netdev_priv(dev);
+-	ep = fep->hwp;
++	ep = fep->phy_hwp;
+ 	mii_reg = ep->fec_mii_data;
+ 
+ 	spin_lock(&fep->lock);
+@@ -753,7 +762,7 @@ mii_queue(struct net_device *dev, int re
+ 			mii_tail = mip;
+ 		} else {
+ 			mii_head = mii_tail = mip;
+-			fep->hwp->fec_mii_data = regval;
++			fep->phy_hwp->fec_mii_data = regval;
+ 		}
+ 	} else {
+ 		retval = 1;
+@@ -1151,8 +1160,7 @@ static phy_info_t const phy_info_ks8721b
+ };
+ 
+ /* ------------------------------------------------------------------------- */
+-/* register definitions for the DP83848 */
+-
++/* register definitions for the DP83848 and DP83849 */
+ #define MII_DP8384X_PHYSTST    16  /* PHY Status Register */
+ 
+ static void mii_parse_dp8384x_sr2(uint mii_reg, struct net_device *dev)
+@@ -1186,27 +1194,50 @@ static void mii_parse_dp8384x_sr2(uint m
+ 		*s |= PHY_STAT_FAULT;
+ }
+ 
++static phy_cmd_t const phy_cmd_dp8384x_ack_int[] = {
++		{ mk_mii_end, }
++	};
++
++static phy_cmd_t const phy_cmd_dp8384x_shutdown[] = {
++		{ mk_mii_end, }
++	};
++
+ static phy_info_t phy_info_dp83848= {
+-	0x020005c9,
+-	"DP83848",
++	.id = 0x020005c9,
++	.name = "DP83848",
+ 
+-	(const phy_cmd_t []) {  /* config */
++	.config = (const phy_cmd_t []) {  /* config */
+ 		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
+ 		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
+ 		{ mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 },
+ 		{ mk_mii_end, }
+ 	},
+-	(const phy_cmd_t []) {  /* startup - enable interrupts */
++	.startup = (const phy_cmd_t []) {  /* startup - enable interrupts */
+ 		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
+ 		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
+ 		{ mk_mii_end, }
+ 	},
+-	(const phy_cmd_t []) { /* ack_int - never happens, no interrupt */
++	.ack_int = phy_cmd_dp8384x_ack_int,
++	.shutdown = phy_cmd_dp8384x_shutdown,
++};
++
++static phy_info_t phy_info_dp83849 = {
++	.id = 0x020005ca,
++	.name = "DP83849",
++
++	.config = (const phy_cmd_t []) {  /* config */
++		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
++		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
++		{ mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 },
+ 		{ mk_mii_end, }
+ 	},
+-	(const phy_cmd_t []) {  /* shutdown */
++	.startup = (const phy_cmd_t []) {  /* startup - enable interrupts */
++		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
++		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
+ 		{ mk_mii_end, }
+ 	},
++	.ack_int = phy_cmd_dp8384x_ack_int,
++	.shutdown = phy_cmd_dp8384x_shutdown,
+ };
+ 
+ /* ------------------------------------------------------------------------- */
+@@ -1218,6 +1249,7 @@ static phy_info_t const * const phy_info
+ 	&phy_info_am79c874,
+ 	&phy_info_ks8721bl,
+ 	&phy_info_dp83848,
++	&phy_info_dp83849,
+ 	NULL
+ };
+ 
+@@ -1799,6 +1831,138 @@ static void __inline__ fec_uncache(unsig
+ 
+ /* ------------------------------------------------------------------------- */
+ 
++#elif defined(CONFIG_M54455)
++/*
++ * Code specific for M54455
++ */
++
++static void __inline__ fec_request_intrs(struct net_device *dev)
++{
++	struct fec_enet_private *fep;
++	int b;
++	static const struct idesc {
++		char *name;
++		unsigned short irq;
++	} *idp, id[] = {
++	    { "fec(TXF)", 36 },
++	    { "fec(TXB)", 37 },
++	    { "fec(TXFIFO)", 38 },
++	    { "fec(TXCR)", 39 },
++	    { "fec(RXF)", 40 },
++	    { "fec(RXB)", 41 },
++	    { "fec(MII)", 42 },
++	    { "fec(LC)", 43 },
++	    { "fec(HBERR)", 44 },
++	    { "fec(GRA)", 45 },
++	    { "fec(EBERR)", 46 },
++	    { "fec(BABT)", 47 },
++	    { "fec(BABR)", 48 },
++	    { NULL },
++	};
++
++	fep = netdev_priv(dev);
++	b = (fep->index) ? 77 : 64;
++
++	/* Setup interrupt handlers. */
++	for (idp = id; idp->name; idp++) {
++		if (request_irq(b+idp->irq, fec_enet_interrupt, 0,
++		    idp->name, dev) != 0)
++			printk(KERN_ERR "FEC: Could not alloc %s IRQ(%d)!\n",
++				idp->name, b+idp->irq);
++	}
++
++	if (fep->index) {
++		/* Configure RMII */
++		MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC &
++			MCF_GPIO_PAR_FEC_FEC1_MASK) |
++			MCF_GPIO_PAR_FEC_FEC1_RMII_GPIO;
++	} else {
++		/* Configure RMII */
++		MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC &
++			MCF_GPIO_PAR_FEC_FEC0_MASK) |
++			MCF_GPIO_PAR_FEC_FEC0_RMII_GPIO;
++	}
++
++	/* Set up gpio outputs for MII lines on FEC0 */
++	MCF_GPIO_PAR_FECI2C |= (0 |
++		MCF_GPIO_PAR_FECI2C_MDIO0_MDIO0 |
++		MCF_GPIO_PAR_FECI2C_MDC0_MDC0);
++}
++
++static void __inline__ fec_set_mii(struct net_device *dev,
++	struct fec_enet_private *fep)
++{
++	volatile fec_t *fecp;
++
++	fecp = fep->hwp;
++	fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
++	fecp->fec_x_cntrl = 0x00;
++
++	/*
++	 * Set MII speed to 2.5 MHz
++	 */
++	fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
++	fecp->fec_mii_speed = fep->phy_speed;
++
++	fec_restart(dev, 0);
++}
++
++static void __inline__ fec_get_mac(struct net_device *dev)
++{
++	struct fec_enet_private *fep = netdev_priv(dev);
++	volatile fec_t *fecp;
++	unsigned char *iap, tmpaddr[ETH_ALEN];
++
++	fecp = fep->hwp;
++
++	if (FEC_FLASHMAC) {
++		/*
++		 * Get MAC address from FLASH.
++		 * If it is all 1's or 0's, use the default.
++		 */
++		iap = FEC_FLASHMAC;
++		if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
++		    (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
++			iap = fec_mac_default;
++		if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
++		    (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
++			iap = fec_mac_default;
++	} else {
++		*((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
++		*((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
++		iap = &tmpaddr[0];
++	}
++
++	memcpy(dev->dev_addr, iap, ETH_ALEN);
++
++	/* Adjust MAC if using default MAC address */
++	if (iap == fec_mac_default)
++		dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] +
++			fep->index;
++}
++
++static void __inline__ fec_enable_phy_intr(void)
++{
++}
++
++static void __inline__ fec_disable_phy_intr(void)
++{
++}
++
++static void __inline__ fec_phy_ack_intr(void)
++{
++}
++
++static void __inline__ fec_localhw_setup(void)
++{
++}
++
++static void __inline__ fec_uncache(unsigned long addr)
++{
++}
++
++/* ------------------------------------------------------------------------- */
++
+ 
+ #else
+ 
+@@ -2305,7 +2469,7 @@ fec_set_mac_address(struct net_device *d
+ 
+ }
+ 
+-/* Initialize the FEC Ethernet on 860T (or ColdFire 5272).
++/* Initialize the FEC Ethernet.
+  */
+  /*
+   * XXX:  We need to clean up on failure exits here.
+@@ -2326,7 +2490,7 @@ int __init fec_enet_init(struct net_devi
+ 
+ 	/* Allocate memory for buffer descriptors.
+ 	*/
+-	mem_addr = __get_free_page(GFP_KERNEL);
++	mem_addr = __get_free_page(GFP_DMA);
+ 	if (mem_addr == 0) {
+ 		printk("FEC: allocate descriptor memory failed?\n");
+ 		return -ENOMEM;
+@@ -2339,6 +2503,11 @@ int __init fec_enet_init(struct net_devi
+ 	fep->index = index;
+ 	fep->hwp = fecp;
+ 	fep->netdev = dev;
++#ifdef CONFIG_FEC_SHARED_PHY
++	fep->phy_hwp = (volatile fec_t *) fec_hw[index & ~1];
++#else
++	fep->phy_hwp = fecp;
++#endif
+ 
+ 	/* Whack a reset.  We should wait for this.
+ 	*/
+@@ -2375,7 +2544,7 @@ int __init fec_enet_init(struct net_devi
+ 
+ 		/* Allocate a page.
+ 		*/
+-		mem_addr = __get_free_page(GFP_KERNEL);
++		mem_addr = __get_free_page(GFP_DMA);
+ 		/* XXX: missing check for allocation failure */
+ 
+ 		fec_uncache(mem_addr);
+@@ -2400,7 +2569,7 @@ int __init fec_enet_init(struct net_devi
+ 	bdp = fep->tx_bd_base;
+ 	for (i=0, j=FEC_ENET_TX_FRPPG; i<TX_RING_SIZE; i++) {
+ 		if (j >= FEC_ENET_TX_FRPPG) {
+-			mem_addr = __get_free_page(GFP_KERNEL);
++			mem_addr = __get_free_page(GFP_DMA);
+ 			j = 1;
+ 		} else {
+ 			mem_addr += FEC_ENET_TX_FRSIZE;
+@@ -2462,7 +2631,11 @@ int __init fec_enet_init(struct net_devi
+ 	 * remainder of the interface.
+ 	 */
+ 	fep->phy_id_done = 0;
++#ifndef CONFIG_FEC_SHARED_PHY
+ 	fep->phy_addr = 0;
++#else
++	fep->phy_addr = fep->index;
++#endif
+ 	mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy);
+ 
+ 	index++;
+--- a/drivers/net/fec.h
++++ b/drivers/net/fec.h
+@@ -14,7 +14,7 @@
+ /****************************************************************************/
+ 
+ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+-    defined(CONFIG_M520x) || defined(CONFIG_M532x)
++    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M54455)
+ /*
+  *	Just figures, Motorola would have to change the offsets for
+  *	registers in the same peripheral device on different models
diff --git a/target/linux/coldfire/patches/011-mcfv4e_namespace_align.patch b/target/linux/coldfire/patches/011-mcfv4e_namespace_align.patch
new file mode 100644
index 0000000000..6bdac88458
--- /dev/null
+++ b/target/linux/coldfire/patches/011-mcfv4e_namespace_align.patch
@@ -0,0 +1,25 @@
+From a51f4e9bff26cc43b53938169f98c27183ec63ea Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 31 Oct 2007 17:08:59 -0600
+Subject: [PATCH] Change to align on page size for COLDFIRE.
+
+LTIBName: mcfv4e-namespace-align
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ fs/namespace.c |    4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+--- a/fs/namespace.c
++++ b/fs/namespace.c
+@@ -1364,7 +1364,11 @@ int copy_mount_options(const void __user
+ 	/* copy_from_user cannot cross TASK_SIZE ! */
+ 	size = TASK_SIZE - (unsigned long)data;
+ 	if (size > PAGE_SIZE)
++#ifndef CONFIG_COLDFIRE
+ 		size = PAGE_SIZE;
++#else
++		size = PAGE_SIZE - ((unsigned long)data & ~PAGE_MASK);
++#endif
+ 
+ 	i = size - exact_copy_from_user((void *)page, data, size);
+ 	if (!i) {
diff --git a/target/linux/coldfire/patches/012-m5445x_defconfig_base.patch b/target/linux/coldfire/patches/012-m5445x_defconfig_base.patch
new file mode 100644
index 0000000000..32e4b0df1b
--- /dev/null
+++ b/target/linux/coldfire/patches/012-m5445x_defconfig_base.patch
@@ -0,0 +1,877 @@
+From d0910067712299dc63cf58447b5dd83513fcbdb4 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 31 Oct 2007 17:12:03 -0600
+Subject: [PATCH] MCF54455 EVB default configuration.
+
+LTIBName: m5445x-defconfig-base
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/configs/m54455evb_defconfig |  862 +++++++++++++++++++++++++++++++++
+ 1 files changed, 862 insertions(+), 0 deletions(-)
+ create mode 100644 arch/m68k/configs/m54455evb_defconfig
+
+--- /dev/null
++++ b/arch/m68k/configs/m54455evb_defconfig
+@@ -0,0 +1,862 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.23
++# Tue Nov 27 23:42:38 2007
++#
++CONFIG_M68K=y
++CONFIG_MMU=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_TIME_LOW_RES=y
++CONFIG_GENERIC_IOMAP=y
++CONFIG_NO_IOPORT=y
++# CONFIG_NO_DMA is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_AUDIT is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=17
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_BLK_DEV_INITRD is not set
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++
++#
++# Platform dependent setup
++#
++# CONFIG_SUN3 is not set
++CONFIG_COLDFIRE=y
++CONFIG_CFV4E=y
++# CONFIG_AMIGA is not set
++# CONFIG_ATARI is not set
++# CONFIG_MAC is not set
++# CONFIG_APOLLO is not set
++# CONFIG_VME is not set
++# CONFIG_HP300 is not set
++# CONFIG_SUN3X is not set
++# CONFIG_Q40 is not set
++
++#
++# Processor type
++#
++# CONFIG_M68020 is not set
++# CONFIG_M68030 is not set
++# CONFIG_M68040 is not set
++# CONFIG_M68060 is not set
++CONFIG_M54455=y
++CONFIG_MCFCLK=266666666
++# CONFIG_MCF_USER_HALT is not set
++CONFIG_MMU_CFV4E=y
++CONFIG_SDRAM_BASE=0x40000000
++CONFIG_SDRAM_SIZE=0x0FFFFFFF
++CONFIG_NOR_FLASH_BASE=0x00000000
++# CONFIG_M68KFPU_EMU is not set
++CONFIG_ADVANCED=y
++# CONFIG_RMW_INSNS is not set
++CONFIG_SINGLE_MEMORY_CHUNK=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_NEED_MULTIPLE_NODES=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++
++#
++# General setup
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++CONFIG_PROC_HARDWARE=y
++CONFIG_ZONE_DMA=y
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++
++#
++# Power management options
++#
++# CONFIG_PM is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++CONFIG_NET_KEY=y
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_MULTIPLE_TABLES is not set
++# CONFIG_IP_ROUTE_MULTIPATH is not set
++# CONFIG_IP_ROUTE_VERBOSE is not set
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++CONFIG_INET_AH=y
++CONFIG_INET_ESP=y
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++# CONFIG_STANDALONE is not set
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++CONFIG_MTD_DEBUG=y
++CONFIG_MTD_DEBUG_VERBOSE=0
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++CONFIG_MTD_CFI_ADV_OPTIONS=y
++CONFIG_MTD_CFI_NOSWAP=y
++# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
++# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
++CONFIG_MTD_CFI_GEOMETRY=y
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++# CONFIG_MTD_CFI_I2 is not set
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_OTP is not set
++CONFIG_MTD_CFI_INTELEXT=y
++# CONFIG_MTD_CFI_AMDSTD is not set
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x00000000
++CONFIG_MTD_PHYSMAP_LEN=0x1000000
++CONFIG_MTD_PHYSMAP_BANKWIDTH=1
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=64000
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++CONFIG_ATA=m
++# CONFIG_ATA_NONSTANDARD is not set
++CONFIG_PATA_FSL=m
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++CONFIG_FEC=y
++# CONFIG_FEC2 is not set
++CONFIG_NETDEV_1000=y
++CONFIG_NETDEV_10000=y
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_COLDFIRE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_WATCHDOG is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++CONFIG_HID_DEBUG=y
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# USB Gadget Support
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# DMA Engine support
++#
++# CONFIG_DMA_ENGINE is not set
++
++#
++# DMA Clients
++#
++
++#
++# DMA Devices
++#
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# Character devices
++#
++# CONFIG_SERIAL_CONSOLE is not set
++
++#
++# File systems
++#
++# CONFIG_EXT2_FS is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_MINIX_FS=y
++# CONFIG_ROMFS_FS is not set
++# CONFIG_INOTIFY is not set
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++CONFIG_NTFS_FS=y
++# CONFIG_NTFS_DEBUG is not set
++CONFIG_NTFS_RW=y
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++# CONFIG_PROC_KCORE is not set
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++
++#
++# Network File Systems
++#
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++
++#
++# Native Language Support
++#
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=y
++
++#
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++# CONFIG_ENABLE_MUST_CHECK is not set
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++CONFIG_DEBUG_SLAB=y
++# CONFIG_DEBUG_SLAB_LEAK is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_FRAME_POINTER is not set
++CONFIG_FORCED_INLINING=y
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++CONFIG_BOOTPARAM=y
++CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.163.2:/tftpboot/ltib ip=172.27.163.3:172.27.163.2:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)"
++
++#
++# CodeTEST Setup
++#
++# CONFIG_CODETEST is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_HMAC=y
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=y
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++CONFIG_CRYPTO_TEST=m
++CONFIG_CRYPTO_HW=y
++CONFIG_CRYPTO_DEV_MCFCAU=y
++CONFIG_CRYPTO_DEV_MCFCAU_DES=y
++CONFIG_CRYPTO_DEV_MCFCAU_AES=y
++CONFIG_CRYPTO_DEV_MCFCAU_MD5=y
++CONFIG_CRYPTO_DEV_MCFCAU_SHA1=y
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=y
++CONFIG_CRC16=y
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++CONFIG_LIBCRC32C=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_DMA=y
diff --git a/target/linux/coldfire/patches/013-m5445x_ata.patch b/target/linux/coldfire/patches/013-m5445x_ata.patch
new file mode 100644
index 0000000000..0f269c15ec
--- /dev/null
+++ b/target/linux/coldfire/patches/013-m5445x_ata.patch
@@ -0,0 +1,1079 @@
+From c9e68ea1a541b9762ec0b656509aef3cdd75e035 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Mon, 19 Nov 2007 12:01:34 -0700
+Subject: [PATCH] Add support for the M5445x ATA controller.
+
+LTIBName: m5445x-ata
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/Makefile           |    1 +
+ arch/m68k/coldfire/head.S             |    5 +
+ arch/m68k/coldfire/mcf5445x-devices.c |  125 +++++
+ drivers/ata/Kconfig                   |   11 +-
+ drivers/ata/Makefile                  |    2 +-
+ drivers/ata/pata_fsl.c                |  829 +++++++++++++++++++++++++++++++++
+ include/asm-m68k/pci.h                |   10 +-
+ include/linux/fsl_devices.h           |   11 +
+ 8 files changed, 990 insertions(+), 4 deletions(-)
+ create mode 100644 arch/m68k/coldfire/mcf5445x-devices.c
+ create mode 100644 drivers/ata/pata_fsl.c
+
+--- a/arch/m68k/coldfire/Makefile
++++ b/arch/m68k/coldfire/Makefile
+@@ -9,3 +9,4 @@ ifneq ($(strip $(CONFIG_USB) $(CONFIG_US
+ endif
+ 
+ obj-$(CONFIG_PCI)	+= pci.o mcf5445x-pci.o iomap.o
++obj-$(CONFIG_M54455)	+= mcf5445x-devices.o
+--- a/arch/m68k/coldfire/head.S
++++ b/arch/m68k/coldfire/head.S
+@@ -374,6 +374,11 @@ ENTRY(__start)
+ 		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
+ 		0, MMUDR_LK, %d0
+ 
++	/* Map ATA registers -- sacrifice a data TLB due to the hw design */
++	mmu_map	(0x90000000), (0x90000000), 0, 0, \
++		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
++		0, MMUDR_LK, %d0
++
+ 	/* Do unity mapping to enable the MMU.  Map first 16 MB in place as 
+ 	   code (delete TLBs after MMU is enabled and we are executing in high 
+ 	   memory). */
+--- /dev/null
++++ b/arch/m68k/coldfire/mcf5445x-devices.c
+@@ -0,0 +1,125 @@
++/*
++ * arch/m68k/coldfire/mcf5445x-devices.c
++ *
++ * Coldfire M5445x Platform Device Configuration
++ *
++ * Based on the Freescale MXC devices.c
++ *
++ * Copyright (c) 2007 Freescale Semiconductor, Inc.
++ *	Kurt Mahan <kmahan@freescale.com>
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/fsl_devices.h>
++
++#include <asm/coldfire.h>
++#include <asm/mcfsim.h>
++
++/* ATA Interrupt */
++#define IRQ_ATA		(64 + 64 + 54)
++
++/* ATA Base */
++#define	BASE_IO_ATA	0x90000000
++
++#define ATA_IER		MCF_REG08(BASE_IO_ATA+0x2c)	/* int enable reg */
++#define ATA_ICR		MCF_REG08(BASE_IO_ATA+0x30)	/* int clear reg */
++
++/*
++ * On-chip PATA
++ */
++#if defined(CONFIG_PATA_FSL) || defined(CONFIG_PATA_FSL_MODULE)
++static int ata_init(struct platform_device *pdev)
++{
++	/* clear ints */
++	ATA_IER = 0x00;
++	ATA_ICR = 0xff;
++
++	/* setup shared pins */
++	MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC & MCF_GPIO_PAR_FEC_FEC1_MASK) |
++			   MCF_GPIO_PAR_FEC_FEC1_ATA;
++
++	MCF_GPIO_PAR_FECI2C = (MCF_GPIO_PAR_FECI2C &
++	  		      (MCF_GPIO_PAR_FECI2C_MDC1_MASK &
++			      MCF_GPIO_PAR_FECI2C_MDIO1_MASK)) |
++	  		      MCF_GPIO_PAR_FECI2C_MDC1_ATA_DIOR |
++	  		      MCF_GPIO_PAR_FECI2C_MDIO1_ATA_DIOW;
++
++	MCF_GPIO_PAR_ATA = MCF_GPIO_PAR_ATA_BUFEN |
++			   MCF_GPIO_PAR_ATA_CS1 |
++			   MCF_GPIO_PAR_ATA_CS0 |
++			   MCF_GPIO_PAR_ATA_DA2 |
++			   MCF_GPIO_PAR_ATA_DA1 |
++			   MCF_GPIO_PAR_ATA_DA0 |
++			   MCF_GPIO_PAR_ATA_RESET_RESET |
++			   MCF_GPIO_PAR_ATA_DMARQ_DMARQ |
++			   MCF_GPIO_PAR_ATA_IORDY_IORDY;
++
++	MCF_GPIO_PAR_PCI = (MCF_GPIO_PAR_PCI &
++			     (MCF_GPIO_PAR_PCI_GNT3_MASK &
++			      MCF_GPIO_PAR_PCI_REQ3_MASK)) |
++			   MCF_GPIO_PAR_PCI_GNT3_ATA_DMACK |
++			   MCF_GPIO_PAR_PCI_REQ3_ATA_INTRQ;
++
++	return 0;
++}
++
++static void ata_exit(void)
++{
++	printk(KERN_INFO "** ata_exit\n");
++}
++
++static int ata_get_clk_rate(void)
++{
++	return MCF_BUSCLK;
++}
++
++static struct fsl_ata_platform_data ata_data = {
++	.init             = ata_init,
++	.exit             = ata_exit,
++	.get_clk_rate     = ata_get_clk_rate,
++};
++
++static struct resource pata_fsl_resources[] = {
++	[0] = {		/* I/O */
++		.start		= BASE_IO_ATA,
++		.end		= BASE_IO_ATA + 0x000000d8,
++		.flags		= IORESOURCE_MEM,
++	},
++	[2] = {		/* IRQ */
++		.start		= IRQ_ATA,
++		.end		= IRQ_ATA,
++		.flags		= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device pata_fsl_device = {
++	.name			= "pata_fsl",
++	.id			= -1,
++	.num_resources		= ARRAY_SIZE(pata_fsl_resources),
++	.resource		= pata_fsl_resources,
++	.dev			= {
++		.platform_data	= &ata_data,
++		.coherent_dma_mask = ~0,	/* $$$ REVISIT */
++	},
++};
++
++static inline void mcf5445x_init_pata(void)
++{
++	(void)platform_device_register(&pata_fsl_device);
++}
++#else
++static inline void mcf5445x_init_pata(void)
++{
++}
++#endif
++
++static int __init mcf5445x_init_devices(void)
++{
++	printk(KERN_INFO "MCF5445x INIT_DEVICES\n");
++	mcf5445x_init_pata();
++
++	return 0;
++}
++arch_initcall(mcf5445x_init_devices);
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -6,7 +6,7 @@ menuconfig ATA
+ 	tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"
+ 	depends on HAS_IOMEM
+ 	depends on BLOCK
+-	depends on !(M32R || M68K) || BROKEN
++	depends on !M32R || BROKEN
+ 	depends on !SUN4 || BROKEN
+ 	select SCSI
+ 	---help---
+@@ -679,4 +679,13 @@ config PATA_BF54X
+ 
+ 	  If unsure, say N.
+ 
++config PATA_FSL
++	tristate "Freescale on-chip PATA support"
++	depends on (ARCH_MX3 || ARCH_MX27 || PPC_512x || M54455)
++	help
++	  On Freescale processors, say Y here if you wish to use the on-chip
++	  ATA interface.
++
++	  If you are unsure, say N to this.
++
+ endif # ATA
+--- a/drivers/ata/Makefile
++++ b/drivers/ata/Makefile
+@@ -1,4 +1,3 @@
+-
+ obj-$(CONFIG_ATA)		+= libata.o
+ 
+ obj-$(CONFIG_SATA_AHCI)		+= ahci.o
+@@ -71,6 +70,7 @@ obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
+ obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
+ obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
+ obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
++obj-$(CONFIG_PATA_FSL)		+= pata_fsl.o
+ # Should be last but two libata driver
+ obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
+ # Should be last but one libata driver
+--- /dev/null
++++ b/drivers/ata/pata_fsl.c
+@@ -0,0 +1,829 @@
++/*
++ * Freescale integrated PATA driver
++ */
++
++/*
++ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/blkdev.h>
++#include <scsi/scsi_host.h>
++#include <linux/ata.h>
++#include <linux/libata.h>
++#include <linux/platform_device.h>
++#include <linux/fsl_devices.h>
++#ifdef CONFIG_FSL_PATA_USE_DMA
++#include <asm/dma.h>
++#endif
++
++#define DRV_NAME "pata_fsl"
++#define DRV_VERSION "1.0"
++
++#ifdef CONFIG_M54455
++#define WRITE_ATA8(val, reg)			\
++	__raw_writeb(val, (ata_regs + reg));
++#define WRITE_ATA16(val, reg)			\
++	__raw_writew(val, (ata_regs + reg));
++#else
++#define WRITE_ATA8(val, reg)			\
++	__raw_writel(val, (ata_regs + reg));
++#define WRITE_ATA16(val, reg)			\
++	__raw_writel(val, (ata_regs + reg));
++#endif
++
++struct pata_fsl_priv {
++#ifdef CONFIG_FSL_PATA_USE_DMA
++	int ultra;
++#endif
++	u8 *fsl_ata_regs;
++#ifdef CONFIG_FSL_PATA_USE_DMA
++	int dma_rchan;
++	int dma_wchan;
++	int dma_done;
++	int dma_dir;
++#endif
++};
++
++enum {
++	/* various constants */
++
++#ifdef CONFIG_FSL_PATA_USE_DMA
++	FSL_ATA_MAX_SG_LEN      = 65534,
++#endif
++
++	/* offsets to registers */
++
++	FSL_ATA_TIMING_REGS     = 0x00,
++	FSL_ATA_FIFO_FILL       = 0x20,
++	FSL_ATA_CONTROL         = 0x24,
++	FSL_ATA_INT_PEND        = 0x28,
++	FSL_ATA_INT_EN          = 0x2C,
++	FSL_ATA_INT_CLEAR       = 0x30,
++	FSL_ATA_FIFO_ALARM      = 0x34,
++	FSL_ATA_DRIVE_DATA      = 0xA0,
++	FSL_ATA_DRIVE_CONTROL   = 0xD8,
++
++	/* bits within FSL_ATA_CONTROL */
++
++	FSL_ATA_CTRL_FIFO_RST_B    = 0x80,
++	FSL_ATA_CTRL_ATA_RST_B     = 0x40,
++	FSL_ATA_CTRL_FIFO_TX_EN    = 0x20,
++	FSL_ATA_CTRL_FIFO_RCV_EN   = 0x10,
++	FSL_ATA_CTRL_DMA_PENDING   = 0x08,
++	FSL_ATA_CTRL_DMA_ULTRA     = 0x04,
++	FSL_ATA_CTRL_DMA_WRITE     = 0x02,
++	FSL_ATA_CTRL_IORDY_EN      = 0x01,
++
++	/* bits within the interrupt control registers */
++
++	FSL_ATA_INTR_ATA_INTRQ1      = 0x80,
++	FSL_ATA_INTR_FIFO_UNDERFLOW  = 0x40,
++	FSL_ATA_INTR_FIFO_OVERFLOW   = 0x20,
++	FSL_ATA_INTR_CTRL_IDLE       = 0x10,
++	FSL_ATA_INTR_ATA_INTRQ2      = 0x08,
++};
++
++/*
++ * This structure contains the timing parameters for
++ * ATA bus timing in the 5 PIO modes.  The timings
++ * are in nanoseconds, and are converted to clock
++ * cycles before being stored in the ATA controller
++ * timing registers.
++ */
++static struct {
++	short t0, t1, t2_8, t2_16, t2i, t4, t9, tA;
++} pio_specs[] = {
++	[0] = {
++		.t0 = 600, .t1 = 70, .t2_8 = 290, .t2_16 = 165, .t2i = 0,
++		.t4 = 30,.t9 = 20,.tA = 50
++	},
++	[1] = {
++		.t0 = 383, .t1 = 50, .t2_8 = 290, .t2_16 = 125, .t2i = 0,
++		.t4 = 20, .t9 = 15, .tA = 50
++	},
++	[2] = {
++		.t0 = 240, .t1 = 30, .t2_8 = 290, .t2_16 = 100, .t2i = 0,
++		.t4 = 15, .t9 = 10, .tA = 50
++	},
++	[3] = {
++		.t0 = 180, .t1 = 30, .t2_8 = 80, .t2_16 = 80, .t2i = 0,
++		.t4 = 10, .t9 = 10, .tA = 50
++	},
++	[4] = {
++		.t0 = 120, .t1 = 25, .t2_8 = 70, .t2_16 = 70, .t2i = 0,
++		.t4 = 10, .t9 = 10, .tA = 50
++	},
++};
++
++#define NR_PIO_SPECS (sizeof pio_specs / sizeof pio_specs[0])
++
++/*
++ * This structure contains the timing parameters for
++ * ATA bus timing in the 3 MDMA modes.  The timings
++ * are in nanoseconds, and are converted to clock
++ * cycles before being stored in the ATA controller
++ * timing registers.
++ */
++static struct {
++	short t0M, tD, tH, tJ, tKW, tM, tN, tJNH;
++} mdma_specs[] = {
++	[0] = {
++		.t0M = 480, .tD = 215, .tH = 20, .tJ = 20, .tKW = 215,
++		.tM = 50, .tN = 15, .tJNH = 20
++	},
++	[1] = {
++		.t0M = 150, .tD = 80, .tH = 15, .tJ = 5, .tKW = 50,
++		.tM = 30, .tN = 10, .tJNH = 15
++	},
++	[2] = {
++		.t0M = 120, .tD = 70, .tH = 10, .tJ = 5, .tKW = 25,
++		.tM = 25, .tN = 10, .tJNH = 10
++	},
++};
++
++#define NR_MDMA_SPECS (sizeof mdma_specs / sizeof mdma_specs[0])
++
++/*
++ * This structure contains the timing parameters for
++ * ATA bus timing in the 6 UDMA modes.  The timings
++ * are in nanoseconds, and are converted to clock
++ * cycles before being stored in the ATA controller
++ * timing registers.
++ */
++static struct {
++	short t2CYC, tCYC, tDS, tDH, tDVS, tDVH, tCVS, tCVH, tFS_min, tLI_max,
++	    tMLI, tAZ, tZAH, tENV_min, tSR, tRFS, tRP, tACK, tSS, tDZFS;
++} udma_specs[] = {
++	[0] = {
++		.t2CYC = 235, .tCYC = 114, .tDS = 15, .tDH = 5, .tDVS = 70,
++		.tDVH = 6, .tCVS = 70, .tCVH = 6, .tFS_min = 0,
++		.tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20,
++		.tENV_min = 20, .tSR = 50, .tRFS = 75, .tRP = 160,
++		.tACK = 20, .tSS = 50, .tDZFS = 80
++	},
++	[1] = {
++		.t2CYC = 156, .tCYC = 75, .tDS = 10, .tDH = 5, .tDVS = 48,
++		.tDVH = 6, .tCVS = 48, .tCVH = 6, .tFS_min = 0,
++		.tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20,
++		.tENV_min = 20, .tSR = 30, .tRFS = 70, .tRP = 125,
++		.tACK = 20, .tSS = 50, .tDZFS = 63
++	},
++	[2] = {
++		.t2CYC = 117, .tCYC = 55, .tDS = 7, .tDH = 5, .tDVS = 34,
++		.tDVH = 6, .tCVS = 34, .tCVH = 6, .tFS_min = 0,
++		.tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20,
++		.tENV_min = 20, .tSR = 20, .tRFS = 60, .tRP = 100,
++		.tACK = 20, .tSS = 50, .tDZFS = 47
++	},
++	[3] = {
++		.t2CYC = 86, .tCYC = 39, .tDS = 7, .tDH = 5, .tDVS = 20,
++		.tDVH = 6, .tCVS = 20, .tCVH = 6, .tFS_min = 0,
++		.tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20,
++		.tENV_min = 20, .tSR = 20, .tRFS = 60, .tRP = 100,
++		.tACK = 20, .tSS = 50, .tDZFS = 35
++	},
++	[4] = {
++		.t2CYC = 57, .tCYC = 25, .tDS = 5, .tDH = 5, .tDVS = 7,
++		.tDVH = 6, .tCVS = 7, .tCVH = 6, .tFS_min = 0,
++		.tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20,
++		.tENV_min = 20, .tSR = 50, .tRFS = 60, .tRP = 100,
++		.tACK = 20, .tSS = 50, .tDZFS = 25
++	},
++	[5] = {
++		.t2CYC = 38, .tCYC = 17, .tDS = 4, .tDH = 5, .tDVS = 5,
++		.tDVH = 6, .tCVS = 10, .tCVH = 10, .tFS_min = 0,
++		.tLI_max = 75, .tMLI = 20, .tAZ = 10, .tZAH = 20,
++		.tENV_min = 20, .tSR = 20, .tRFS = 50, .tRP = 85,
++		.tACK = 20, .tSS = 50, .tDZFS = 40
++	},
++};
++
++#define NR_UDMA_SPECS (sizeof udma_specs / sizeof udma_specs[0])
++
++struct fsl_ata_time_regs {
++	u8 time_off, time_on, time_1, time_2w;
++	u8 time_2r, time_ax, time_pio_rdx, time_4;
++	u8 time_9, time_m, time_jn, time_d;
++	u8 time_k, time_ack, time_env, time_rpx;
++	u8 time_zah, time_mlix, time_dvh, time_dzfs;
++	u8 time_dvs, time_cvh, time_ss, time_cyc;
++};
++
++static void update_timing_config(struct fsl_ata_time_regs *tp, struct ata_host *host)
++{
++	u32 *lp = (u32 *)tp;
++	struct pata_fsl_priv *priv = host->private_data;
++	u32 *ctlp = (u32 *)priv->fsl_ata_regs;
++	int i;
++
++	/* 
++	 * JKM - this could have endianess issues on BE depending
++	 * on how the controller is glued to the bus -- probably
++	 * should rewrite this to write byte at a time.
++	 */
++	for (i = 0; i < 5; i++) {
++		__raw_writel(*lp, ctlp);
++		lp++;
++		ctlp++;
++	}
++	mb();
++}
++
++/*!
++ * Calculate values for the ATA bus timing registers and store
++ * them into the hardware.
++ *
++ * @param       xfer_mode   specifies XFER xfer_mode
++ * @param       pdev        specifies platform_device
++ *
++ * @return      EINVAL      speed out of range, or illegal mode
++ */
++static int set_ata_bus_timing(u8 xfer_mode, struct platform_device *pdev)
++{
++	struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *)
++					     pdev->dev.platform_data;
++	struct ata_host *host = dev_get_drvdata(&pdev->dev);
++
++	/* get the bus clock cycle time, in ns */
++	int T = 1 * 1000 * 1000 * 1000 / plat->get_clk_rate();
++	struct fsl_ata_time_regs tr = {0};
++	DPRINTK("clk_rate = %d  T = %d\n",plat->get_clk_rate(), T);
++
++	/*
++	 * every mode gets the same t_off and t_on
++	 */
++	tr.time_off = 3;
++	tr.time_on = 3;
++
++	if (xfer_mode >= XFER_UDMA_0) {
++		int speed = xfer_mode - XFER_UDMA_0;
++		if (speed >= NR_UDMA_SPECS) {
++			return -EINVAL;
++		}
++		tr.time_ack = (udma_specs[speed].tACK + T) / T;
++		tr.time_env = (udma_specs[speed].tENV_min + T) / T;
++		tr.time_rpx = (udma_specs[speed].tRP + T) / T + 2;
++
++		tr.time_zah = (udma_specs[speed].tZAH + T) / T;
++		tr.time_mlix = (udma_specs[speed].tMLI + T) / T;
++		tr.time_dvh = (udma_specs[speed].tDVH + T) / T + 1;
++		tr.time_dzfs = (udma_specs[speed].tDZFS + T) / T;
++
++		tr.time_dvs = (udma_specs[speed].tDVS + T) / T;
++		tr.time_cvh = (udma_specs[speed].tCVH + T) / T;
++		tr.time_ss = (udma_specs[speed].tSS + T) / T;
++		tr.time_cyc = (udma_specs[speed].tCYC + T) / T;
++	} else if (xfer_mode >= XFER_MW_DMA_0) {
++		int speed = xfer_mode - XFER_MW_DMA_0;
++		if (speed >= NR_MDMA_SPECS) {
++			return -EINVAL;
++		}
++		tr.time_m = (mdma_specs[speed].tM + T) / T;
++		tr.time_jn = (mdma_specs[speed].tJNH + T) / T;
++		tr.time_d = (mdma_specs[speed].tD + T) / T;
++
++		tr.time_k = (mdma_specs[speed].tKW + T) / T;
++	} else {
++		int speed = xfer_mode - XFER_PIO_0;
++		if (speed >= NR_PIO_SPECS) {
++			return -EINVAL;
++		}
++		tr.time_1 = (pio_specs[speed].t1 + T) / T;
++		tr.time_2w = (pio_specs[speed].t2_8 + T) / T;
++
++		tr.time_2r = (pio_specs[speed].t2_8 + T) / T;
++		tr.time_ax = (pio_specs[speed].tA + T) / T + 2;
++		tr.time_pio_rdx = 1;
++		tr.time_4 = (pio_specs[speed].t4 + T) / T;
++
++		tr.time_9 = (pio_specs[speed].t9 + T) / T;
++	}
++
++	update_timing_config(&tr, host);
++
++	return 0;
++}
++
++static void pata_fsl_set_piomode(struct ata_port *ap, struct ata_device *adev)
++{
++	set_ata_bus_timing(adev->pio_mode, to_platform_device(ap->dev));
++}
++
++#ifdef CONFIG_FSL_PATA_USE_DMA
++static void pata_fsl_set_dmamode(struct ata_port *ap, struct ata_device *adev)
++{
++	struct pata_fsl_priv *priv = ap->host->private_data;
++
++	priv->ultra = adev->dma_mode >= XFER_UDMA_0;
++
++	set_ata_bus_timing(adev->dma_mode, to_platform_device(ap->dev));
++}
++#endif
++
++static int pata_fsl_port_start(struct ata_port *ap)
++{
++	return 0;
++}
++
++#ifdef CONFIG_FSL_PATA_USE_DMA
++static void dma_callback(void *arg, int error_status, unsigned int count)
++{
++	struct ata_port *ap = arg;
++	struct pata_fsl_priv *priv = ap->host->private_data;
++	u8 *ata_regs = priv->fsl_ata_regs;
++
++	priv->dma_done = 1;
++	/* 
++	 * DMA is finished, so unmask INTRQ from the drive to allow the
++	 * normal ISR to fire.
++	 */
++#if 0
++	__raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN);
++#else
++	WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN);
++#endif
++	mb();
++}
++
++static void pata_fsl_bmdma_setup(struct ata_queued_cmd *qc)
++{
++	int nr_sg = 0;
++	int chan;
++	int dma_mode = 0, dma_ultra;
++	u8 ata_control;
++	struct ata_port *ap = qc->ap;
++	struct pata_fsl_priv *priv = ap->host->private_data;
++	u8 *ata_regs = priv->fsl_ata_regs;
++	struct fsl_ata_platform_data *plat = ap->dev->platform_data;
++	struct scatterlist tmp[plat->max_sg], *tsg, *sg;
++	int err;
++
++	DPRINTK("ENTER\n");
++
++	priv->dma_dir = qc->dma_dir;
++
++	/*
++	 * Configure the on-chip ATA interface hardware.
++	 */
++	dma_ultra = priv->ultra ?
++		FSL_ATA_CTRL_DMA_ULTRA : 0;
++
++	ata_control = FSL_ATA_CTRL_FIFO_RST_B |
++		      FSL_ATA_CTRL_ATA_RST_B |
++		      FSL_ATA_CTRL_DMA_PENDING |
++		      dma_ultra;
++
++	if (qc->dma_dir == DMA_TO_DEVICE) {
++		chan = priv->dma_wchan;
++		ata_control |= FSL_ATA_CTRL_FIFO_TX_EN |
++			      FSL_ATA_CTRL_DMA_WRITE;
++		dma_mode = DMA_MODE_WRITE;
++	} else {
++		chan = priv->dma_rchan;
++		ata_control |= FSL_ATA_CTRL_FIFO_RCV_EN;
++		dma_mode = DMA_MODE_READ;
++	}
++#if 0
++	__raw_writel(ata_control, ata_regs + FSL_ATA_CONTROL);
++	__raw_writel(plat->fifo_alarm, ata_regs + FSL_ATA_FIFO_ALARM);
++	__raw_writel(FSL_ATA_INTR_ATA_INTRQ1, ata_regs + FSL_ATA_INT_EN);
++#else
++	WRITE_ATA8(ata_control, FSL_ATA_CONTROL);
++	WRITE_ATA8(plat->fifo_alarm, FSL_ATA_FIFO_ALARM);
++	WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ1, FSL_ATA_INT_EN);
++#endif
++	mb();
++
++	/*
++	 * Set up the DMA completion callback.
++	 */
++	mxc_dma_callback_set(chan, dma_callback, (void *)ap);
++
++	/*
++	 * Copy the sg list to an array.
++	 */
++	tsg = tmp;
++	ata_for_each_sg(sg, qc) {
++		memcpy(tsg, sg, sizeof *sg);
++		tsg++;
++		nr_sg++;
++	}
++	
++	err = mxc_dma_sg_config(chan, tmp, nr_sg, 0, dma_mode);
++	if (err) {
++		printk(KERN_ERR "pata_fsl_bmdma_setup: error %d\n", err);
++	}
++	DPRINTK("EXIT\n");
++}
++
++static void pata_fsl_bmdma_start(struct ata_queued_cmd *qc)
++{
++	struct ata_port *ap = qc->ap;
++	struct pata_fsl_priv *priv = ap->host->private_data;
++	int chan;
++	int err;
++
++	/*
++	 * Start the channel.
++	 */
++	chan = qc->dma_dir == DMA_TO_DEVICE ? priv->dma_wchan : priv->dma_rchan;
++
++	priv->dma_done = 0;
++
++	err = mxc_dma_enable(chan);
++	if (err) {
++		printk(KERN_ERR "%s: : error %d\n", __func__, err);
++	}
++
++	ap->ops->exec_command(ap, &qc->tf);
++}
++
++static void pata_fsl_bmdma_stop(struct ata_queued_cmd *qc)
++{
++	struct ata_port *ap = qc->ap;
++
++	/* do a dummy read as in ata_bmdma_stop */
++	ata_altstatus(ap);
++}
++
++static u8 pata_fsl_bmdma_status(struct ata_port *ap)
++{
++	struct pata_fsl_priv *priv = ap->host->private_data;
++
++	return priv->dma_done ? ATA_DMA_INTR : 0;
++}
++
++static void pata_fsl_dma_init(struct ata_port *ap)
++{
++	struct pata_fsl_priv *priv = ap->host->private_data;
++
++	priv->dma_rchan = -1;
++	priv->dma_wchan = -1;
++
++	priv->dma_rchan = mxc_dma_request(MXC_DMA_ATA_RX, "MXC ATA RX");
++	if (priv->dma_rchan < 0) {
++		dev_printk(KERN_ERR, ap->dev, "couldn't get RX DMA channel\n");
++		goto err_out;
++	}
++
++	priv->dma_wchan = mxc_dma_request(MXC_DMA_ATA_TX, "MXC ATA TX");
++	if (priv->dma_wchan < 0) {
++		dev_printk(KERN_ERR, ap->dev, "couldn't get TX DMA channel\n");
++		goto err_out;
++	}       
++
++	dev_printk(KERN_ERR, ap->dev, "rchan=%d wchan=%d\n", priv->dma_rchan,
++		   priv->dma_wchan);
++	return;
++
++err_out:
++	ap->mwdma_mask = 0;
++	ap->udma_mask = 0;
++	mxc_dma_free(priv->dma_rchan);
++	mxc_dma_free(priv->dma_wchan);
++	kfree(priv);
++}
++#endif /* CONFIG_FSL_PATA_USE_DMA */
++
++static u8 pata_fsl_irq_ack(struct ata_port *ap, unsigned int chk_drq)
++{
++	unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
++	u8 status;
++
++	status = ata_busy_wait(ap, bits, 1000);
++	if (status & bits)
++		if (ata_msg_err(ap))
++			printk(KERN_ERR "abnormal status 0x%X\n", status);
++
++	return status;
++}
++
++static void ata_dummy_noret(struct ata_port *ap) { return; }
++
++static struct scsi_host_template pata_fsl_sht = {
++	.module			= THIS_MODULE,
++	.name			= DRV_NAME,
++	.ioctl			= ata_scsi_ioctl,
++	.queuecommand		= ata_scsi_queuecmd,
++	.can_queue		= ATA_DEF_QUEUE,
++	.this_id		= ATA_SHT_THIS_ID,
++	.sg_tablesize		= LIBATA_MAX_PRD,
++	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
++	.emulated		= ATA_SHT_EMULATED,
++	.use_clustering		= ATA_SHT_USE_CLUSTERING,
++	.proc_name		= DRV_NAME,
++#ifdef CONFIG_FSL_PATA_USE_DMA
++	.dma_boundary		= FSL_ATA_MAX_SG_LEN,
++#endif
++	.slave_configure	= ata_scsi_slave_config,
++	.slave_destroy		= ata_scsi_slave_destroy,
++	.bios_param		= ata_std_bios_param,
++};
++
++static struct ata_port_operations pata_fsl_port_ops = {
++	.set_piomode		= pata_fsl_set_piomode,
++#ifdef CONFIG_FSL_PATA_USE_DMA
++	.set_dmamode		= pata_fsl_set_dmamode,
++#endif
++
++	.port_disable		= ata_port_disable,
++	.tf_load		= ata_tf_load,
++	.tf_read		= ata_tf_read,
++	.check_status		= ata_check_status,
++	.exec_command		= ata_exec_command,
++	.dev_select		= ata_std_dev_select,
++
++	.freeze			= ata_bmdma_freeze,
++	.thaw			= ata_bmdma_thaw,
++	.error_handler		= ata_bmdma_error_handler,
++	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
++	.cable_detect		= ata_cable_unknown,
++
++#ifdef CONFIG_FSL_PATA_USE_DMA
++	.bmdma_setup		= pata_fsl_bmdma_setup,
++	.bmdma_start		= pata_fsl_bmdma_start,
++#endif
++
++	.qc_prep		= ata_noop_qc_prep,
++	.qc_issue		= ata_qc_issue_prot,
++
++	.data_xfer		= ata_data_xfer_noirq,
++
++	.irq_clear		= ata_dummy_noret,
++	.irq_on			= ata_irq_on,
++	.irq_ack		= pata_fsl_irq_ack,
++
++	.port_start		= pata_fsl_port_start,
++
++#ifdef CONFIG_FSL_PATA_USE_DMA
++	.bmdma_stop		= pata_fsl_bmdma_stop,
++	.bmdma_status		= pata_fsl_bmdma_status,
++#endif
++};
++
++static void fsl_setup_port(struct ata_ioports *ioaddr)
++{
++	unsigned int shift = 2;
++
++	ioaddr->data_addr	= ioaddr->cmd_addr + (ATA_REG_DATA    << shift);
++	ioaddr->error_addr	= ioaddr->cmd_addr + (ATA_REG_ERR     << shift);
++	ioaddr->feature_addr	= ioaddr->cmd_addr + (ATA_REG_FEATURE << shift);
++	ioaddr->nsect_addr	= ioaddr->cmd_addr + (ATA_REG_NSECT   << shift);
++	ioaddr->lbal_addr	= ioaddr->cmd_addr + (ATA_REG_LBAL    << shift);
++	ioaddr->lbam_addr	= ioaddr->cmd_addr + (ATA_REG_LBAM    << shift);
++	ioaddr->lbah_addr	= ioaddr->cmd_addr + (ATA_REG_LBAH    << shift);
++	ioaddr->device_addr	= ioaddr->cmd_addr + (ATA_REG_DEVICE  << shift);
++	ioaddr->status_addr	= ioaddr->cmd_addr + (ATA_REG_STATUS  << shift);
++	ioaddr->command_addr	= ioaddr->cmd_addr + (ATA_REG_CMD     << shift);
++}
++
++/**
++ *	pata_fsl_probe		-	attach a platform interface
++ *	@pdev: platform device
++ *
++ *	Register a platform bus integrated ATA host controller
++ *
++ *	The 3 platform device resources are used as follows:
++ *
++ *		- I/O Base (IORESOURCE_MEM) virt. addr. of ATA controller regs
++ *		- CTL Base (IORESOURCE_MEM) unused
++ *		- IRQ	   (IORESOURCE_IRQ) platform IRQ assigned to ATA
++ *
++ */
++static int __devinit pata_fsl_probe(struct platform_device *pdev)
++{
++	struct resource *io_res;
++	struct ata_host *host;
++	struct ata_port *ap;
++	struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *)
++					     pdev->dev.platform_data;
++	struct pata_fsl_priv *priv;
++	u8 *ata_regs;
++	int ret;
++
++	DPRINTK("ENTER\n");
++	/* 
++	 * Get an ata_host structure for this device
++	 */
++	host = ata_host_alloc(&pdev->dev, 1);
++	if (!host)
++		return -ENOMEM;
++	ap = host->ports[0];
++
++	/* 
++	 * Allocate private data
++	 */
++	priv = kzalloc(sizeof (struct pata_fsl_priv), GFP_KERNEL);
++	if(priv == NULL) {
++		/* free(host); */
++		return -ENOMEM;
++	}
++	host->private_data = priv;
++
++	/*
++	 * Set up resources
++	 */
++	if (unlikely(pdev->num_resources != 3)) {
++		dev_err(&pdev->dev, "invalid number of resources\n");
++		return -EINVAL;
++	}
++
++	io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	ata_regs = (u8 *)io_res->start;
++	priv->fsl_ata_regs = ata_regs;
++	ap->ioaddr.cmd_addr = (void *)(ata_regs + FSL_ATA_DRIVE_DATA);
++	ap->ioaddr.ctl_addr = (void *)(ata_regs + FSL_ATA_DRIVE_CONTROL);
++	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
++	ap->ops = &pata_fsl_port_ops;
++	ap->pio_mask = 0x7F;
++#ifdef CONFIG_FSL_PATA_USE_DMA
++	ap->mwdma_mask = 0x7F;
++	ap->udma_mask = plat->udma_mask;
++	pata_fsl_sht.sg_tablesize = plat->max_sg;
++#else
++	ap->mwdma_mask = 0x00;
++	ap->udma_mask = 0x00;
++#endif
++	fsl_setup_port(&ap->ioaddr);
++
++	/*
++	 * Do platform-specific initialization (e.g. allocate pins,
++	 * turn on clock).  After this call it is assumed that
++	 * plat->get_clk_rate() can be called to calculate
++	 * timing.
++	 */
++	if (plat->init && plat->init(pdev)) {
++		/* REVISIT: don't leak what ata_host_alloc() allocated */
++		return -ENODEV;
++	}
++
++	/* Deassert the reset bit to enable the interface */
++	WRITE_ATA8(FSL_ATA_CTRL_ATA_RST_B, FSL_ATA_CONTROL);
++	mb();
++
++	/* Set initial timing and mode */
++	set_ata_bus_timing(XFER_PIO_4, pdev);
++
++#ifdef CONFIG_FSL_PATA_USE_DMA
++	/* get DMA ready */
++	pata_fsl_dma_init(ap);
++#endif
++
++	/*
++	 * Enable the ATA INTRQ interrupt from the bus, but
++	 * only allow the CPU to see it (INTRQ2) at this point.
++	 * INTRQ1, which goes to the DMA, will be enabled later.
++	 */
++#if 0
++	__raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN);
++#else
++	WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN);
++#endif
++	mb();
++
++	/* activate */
++	ret = ata_host_activate(host, platform_get_irq(pdev, 0), ata_interrupt,
++				 0, &pata_fsl_sht);
++	DPRINTK("EXIT ret=%d\n", ret);
++	return ret;
++}
++
++/**
++ *	pata_fsl_remove	-	unplug a platform interface
++ *	@pdev: platform device
++ *
++ *	A platform bus ATA device has been unplugged. Perform the needed
++ *	cleanup. Also called on module unload for any active devices.
++ */
++static int __devexit pata_fsl_remove(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	struct ata_host *host = dev_get_drvdata(dev);
++	struct pata_fsl_priv *priv = host->private_data;
++	struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *)
++					     pdev->dev.platform_data;
++	u8 *ata_regs = priv->fsl_ata_regs;
++
++#if 0
++	__raw_writel(0, ata_regs + FSL_ATA_INT_EN);  /* Disable interrupts */
++#else
++	WRITE_ATA8(0, FSL_ATA_INT_EN); /* Disable interrupts */
++#endif
++	mb();
++
++	ata_host_detach(host);
++
++	if (plat->exit)
++		plat->exit();
++
++	kfree(priv);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int pata_fsl_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	struct ata_host *host = dev_get_drvdata(&pdev->dev);
++	struct pata_fsl_priv *priv = host->private_data;
++	struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *)
++					     pdev->dev.platform_data;
++	u8 *ata_regs = priv->fsl_ata_regs;
++
++	/* Disable interrupts. */
++#if 0
++	__raw_writel(0, ata_regs + FSL_ATA_INT_EN);
++#else
++	WRITE_ATA8(0, FSL_ATA_INT_EN);
++#endif
++	mb();
++
++	if (plat->exit)
++		plat->exit();
++
++	return 0;
++}
++
++static int pata_fsl_resume(struct platform_device *pdev)
++{
++	struct ata_host *host = dev_get_drvdata(&pdev->dev);
++	struct pata_fsl_priv *priv = host->private_data;
++	struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *)
++					     pdev->dev.platform_data;
++	u8 *ata_regs = priv->fsl_ata_regs;
++
++	if (plat->init && plat->init(pdev)) {
++		return -ENODEV;
++	}
++
++	/* Deassert the reset bit to enable the interface */
++#if 0
++	__raw_writel(FSL_ATA_CTRL_ATA_RST_B, ata_regs + FSL_ATA_CONTROL);
++#else
++	WRITE_ATA8(FSL_ATA_CTRL_ATA_RST_B, FSL_ATA_CONTROL);
++#endif
++	mb();
++
++	/* Set initial timing and mode */
++	set_ata_bus_timing(XFER_PIO_4, pdev);
++
++	/*
++	 * Enable hardware interrupts.
++	 */
++#if 0
++	__raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN);
++#else
++	WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN);
++#endif
++	mb();
++
++	return 0;
++}
++#endif
++
++static struct platform_driver pata_fsl_driver = {
++	.probe		= pata_fsl_probe,
++	.remove		= __devexit_p(pata_fsl_remove),
++#ifdef CONFIG_PM
++	.suspend	= pata_fsl_suspend,
++	.resume		= pata_fsl_resume,
++#endif
++	.driver = {
++		.name		= DRV_NAME,
++		.owner		= THIS_MODULE,
++	},
++};
++
++static int __init pata_fsl_init(void)
++{
++	int ret;
++
++	DPRINTK("ENTER\n");
++	ret = platform_driver_register(&pata_fsl_driver);
++	DPRINTK("EXIT ret=%d\n", ret);
++	return ret;
++}
++
++static void __exit pata_fsl_exit(void)
++{
++	platform_driver_unregister(&pata_fsl_driver);
++}
++module_init(pata_fsl_init);
++module_exit(pata_fsl_exit);
++
++MODULE_AUTHOR("Freescale Semiconductor, Inc.");
++MODULE_DESCRIPTION("low-level driver for Freescale ATA");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
+--- a/include/asm-m68k/pci.h
++++ b/include/asm-m68k/pci.h
+@@ -7,8 +7,14 @@
+ #ifndef _ASM_M68K_PCI_H
+ #define _ASM_M68K_PCI_H
+ 
+-#ifdef CONFIG_PCI
+-
++#ifndef CONFIG_PCI
++/*
++ * The PCI address space does equal the physical memory
++ * address space.  The networking and block device layers use
++ * this boolean for bounce buffer decisions.
++ */
++#define PCI_DMA_BUS_IS_PHYS		(1)
++#else
+ #include <asm-generic/pci-dma-compat.h>
+ 
+ /*
+--- a/include/linux/fsl_devices.h
++++ b/include/linux/fsl_devices.h
+@@ -126,5 +126,16 @@ struct mpc8xx_pcmcia_ops {
+ 	int(*voltage_set)(int slot, int vcc, int vpp);
+ };
+ 
++struct fsl_ata_platform_data {
++#ifdef	CONFIG_FSL_PATA_USE_DMA
++	int	udma_mask;	/* UDMA modes h/w can handle */
++	int	fifo_alarm;	/* value for fifo_alarm reg */
++	int	max_sg;		/* longest sglist h/w can handle */
++#endif
++	int	(*init)(struct platform_device *pdev);
++	void	(*exit)(void);
++	int	(*get_clk_rate)(void);
++};
++
+ #endif /* _FSL_DEVICE_H_ */
+ #endif /* __KERNEL__ */
diff --git a/target/linux/coldfire/patches/014-m5445x_ioremap_xf0000000.patch b/target/linux/coldfire/patches/014-m5445x_ioremap_xf0000000.patch
new file mode 100644
index 0000000000..11bbbe2473
--- /dev/null
+++ b/target/linux/coldfire/patches/014-m5445x_ioremap_xf0000000.patch
@@ -0,0 +1,61 @@
+From ed9d4b88136173a4e17701d9c1162ddfecf902e4 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Mon, 19 Nov 2007 15:24:30 -0700
+Subject: [PATCH] Short circuit IOREMAP calls in the 0xF0000000 range.
+
+LTIBName: m5445x-ioremap-xf0000000
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/head.S |    4 ++--
+ arch/m68k/mm/kmap.c       |   14 ++++++++++++--
+ 2 files changed, 14 insertions(+), 4 deletions(-)
+
+--- a/arch/m68k/coldfire/head.S
++++ b/arch/m68k/coldfire/head.S
+@@ -56,13 +56,13 @@
+  * Setup ACR mappings to provide the following memory map:
+  *   Data
+  *     0xA0000000 -> 0xAFFFFFFF [0] NO CACHE / PRECISE / SUPER ONLY
+- *     0xFC000000 -> 0xFCFFFFFF [1] NO CACHE / PRECISE / SUPER ONLY
++ *     0xF0000000 -> 0xFFFFFFFF [1] NO CACHE / PRECISE / SUPER ONLY
+  *   Code
+  *     None currently (mapped via TLBs)
+  */
+ 
+ #define ACR0_DEFAULT	#0xA00FA048   /* ACR0 default value */
+-#define ACR1_DEFAULT	#0xFC00A040   /* ACR1 default value */
++#define ACR1_DEFAULT	#0xF00FA040   /* ACR1 default value */
+ #define ACR2_DEFAULT	#0x00000000   /* ACR2 default value */
+ #define ACR3_DEFAULT	#0x00000000   /* ACR3 default value */
+ 
+--- a/arch/m68k/mm/kmap.c
++++ b/arch/m68k/mm/kmap.c
+@@ -133,8 +133,18 @@ void __iomem *__ioremap(unsigned long ph
+ 	}
+ #endif
+ 
++#ifdef CONFIG_M54455
++	if (physaddr >= 0xf0000000) {
++		/* short circuit mappings for xf0000000 */
+ #ifdef DEBUG
+-	printk("ioremap: 0x%lx,0x%lx(%d) - ", physaddr, size, cacheflag);
++		printk(KERN_INFO "ioremap: short circuiting 0x%lx mapping\n", physaddr);
++#endif
++		return (void __iomem *)physaddr;
++	}
++#endif
++
++#ifdef DEBUG
++	printk("ioremap: paddr=0x%lx,size=0x%lx(%d) - ", physaddr, size, cacheflag);
+ #endif
+ 	/*
+ 	 * Mappings have to be aligned
+@@ -153,7 +163,7 @@ void __iomem *__ioremap(unsigned long ph
+ 	virtaddr = (unsigned long)area->addr;
+ 	retaddr = virtaddr + offset;
+ #ifdef DEBUG
+-	printk("0x%lx,0x%lx,0x%lx", physaddr, virtaddr, retaddr);
++	printk(" paddr=0x%lx,vaddr=0x%lx,retaddr=0x%lx", physaddr, virtaddr, retaddr);
+ #endif
+ 
+ 	/*
diff --git a/target/linux/coldfire/patches/015-m5445x_cau_crypto.patch b/target/linux/coldfire/patches/015-m5445x_cau_crypto.patch
new file mode 100644
index 0000000000..dac62e2857
--- /dev/null
+++ b/target/linux/coldfire/patches/015-m5445x_cau_crypto.patch
@@ -0,0 +1,1937 @@
+From 67e24d4008a39fa02a4748a3abf54410b15262b3 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 20 Nov 2007 10:02:16 -0700
+Subject: [PATCH] Add Coldfire CAU crypto support for DES/3DES/AES/MD5/AES.
+
+LTIBName: m5445x-cau-crypto
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/crypto/Kconfig       |   63 ++++
+ drivers/crypto/Makefile      |    5 +
+ drivers/crypto/mcfcau-aes.c  |  311 ++++++++++++++++++++
+ drivers/crypto/mcfcau-des.c  |  437 ++++++++++++++++++++++++++++
+ drivers/crypto/mcfcau-md5.c  |  654 ++++++++++++++++++++++++++++++++++++++++++
+ drivers/crypto/mcfcau-sha1.c |  280 ++++++++++++++++++
+ drivers/crypto/mcfcau.c      |   32 ++
+ drivers/crypto/mcfcau.h      |   98 +++++++
+ 8 files changed, 1880 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/crypto/mcfcau-aes.c
+ create mode 100644 drivers/crypto/mcfcau-des.c
+ create mode 100644 drivers/crypto/mcfcau-md5.c
+ create mode 100644 drivers/crypto/mcfcau-sha1.c
+ create mode 100644 drivers/crypto/mcfcau.c
+ create mode 100644 drivers/crypto/mcfcau.h
+
+--- a/drivers/crypto/Kconfig
++++ b/drivers/crypto/Kconfig
+@@ -60,6 +60,69 @@ config CRYPTO_DEV_GEODE
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called geode-aes.
+ 
++config CRYPTO_DEV_MCFCAU
++	bool "Support for Freescale Coldfire Cryptographic Acceleration Unit (CAU)"
++	depends on M54455
++	select CRYPTO_ALGAPI
++	help
++	  The cryptographic acceleration unit (CAU) is a ColdFire coprocessor
++	  implementing a set of specialized operations in hardware. For example, you can
++	  find it on MCF54455.
++
++config CRYPTO_DEV_MCFCAU_DES
++	tristate "DES and Triple DES cipher algorithms (MCF54455)"
++	depends on CRYPTO_DEV_MCFCAU
++	select CRYPTO_ALGAPI
++	select CRYPTO_BLKCIPHER
++	help
++	  DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
++	  
++	  Say 'Y' here to use the CAU coprocessor for 
++	  the CryptoAPI DES and 3DES alogrithms.
++	 	  
++	  To compile this driver as a module, choose M here: the module
++	  will be called mcfcau-des.
++
++config CRYPTO_DEV_MCFCAU_AES
++	tristate "AES cipher algorithm (MCF54455)"
++	depends on CRYPTO_DEV_MCFCAU
++	select CRYPTO_ALGAPI
++	select CRYPTO_BLKCIPHER
++	help
++	  AES cipher algorithm (FIPS 197).
++
++	  Say 'Y' here to use the CAU coprocessor for
++	  the CryptoAPI AES alogrithm.
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called mcfcau-aes.
++
++config CRYPTO_DEV_MCFCAU_MD5
++	tristate "MD5 digest algorithm (MCF54455)"
++	depends on CRYPTO_DEV_MCFCAU
++	select CRYPTO_ALGAPI
++	help
++	  MD5 message digest algorithm (RFC1321).
++
++	  Say 'Y' here to use the CAU coprocessor for
++	  the CryptoAPI MD5 alogrithm.
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called mcfcau-md5.
++
++config CRYPTO_DEV_MCFCAU_SHA1
++	tristate "SHA1 digest algorithm (MCF54455)"
++	depends on CRYPTO_DEV_MCFCAU
++	select CRYPTO_ALGAPI
++	help
++	  SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
++
++	  Say 'Y' here to use the CAU coprocessor for
++	  the CryptoAPI SHA1 alogrithm.
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called mcfcau-sha1.
++
+ config ZCRYPT
+ 	tristate "Support for PCI-attached cryptographic adapters"
+ 	depends on S390
+--- a/drivers/crypto/Makefile
++++ b/drivers/crypto/Makefile
+@@ -2,3 +2,8 @@ obj-$(CONFIG_CRYPTO_DEV_PADLOCK_AES) += 
+ obj-$(CONFIG_CRYPTO_DEV_PADLOCK_SHA) += padlock-sha.o
+ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o
+ obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
++obj-$(CONFIG_CRYPTO_DEV_MCFCAU) += mcfcau.o
++obj-$(CONFIG_CRYPTO_DEV_MCFCAU_DES) += mcfcau-des.o
++obj-$(CONFIG_CRYPTO_DEV_MCFCAU_AES) += mcfcau-aes.o
++obj-$(CONFIG_CRYPTO_DEV_MCFCAU_MD5) += mcfcau-md5.o
++obj-$(CONFIG_CRYPTO_DEV_MCFCAU_SHA1) += mcfcau-sha1.o
+--- /dev/null
++++ b/drivers/crypto/mcfcau-aes.c
+@@ -0,0 +1,311 @@
++ /***************************************************************************
++ * mcfcau-aes.c - Implementation of AES Cipher Algorithm
++ *                for Freescale ColdFire Cryptographic Acceleration Unit (CAU).
++ *
++ * Author: Andrey Butok
++ * Copyright Freescale Semiconductor Inc.  2007
++ *
++ * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software Foundation,
++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ ***************************************************************************
++ * Changes:
++ * v0.01	17 September 2007	Andrey Butok
++ *   		Initial Release - developed on 2.6.20 Linux kernel.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/crypto.h>
++
++/*
++#undef DEBUG
++#define DEBUG 1
++*/
++
++#include "mcfcau.h"
++
++#define MCFCAU_AES_MIN_KEY_SIZE	(16)
++#define MCFCAU_AES_MAX_KEY_SIZE	(32)
++#define MCFCAU_AES_BLOCK_SIZE	(16)
++
++#define	MCFCAU_AES_DRIVER_DESC		"AES ColdFire CAU driver"
++#define	MCFCAU_AES_DRIVER_VERSION	"v0.01"
++
++struct mcfcau_aes_ctx {
++	int Nr_1;
++	u32 buf[120];
++	u32 buf_tmp[16];
++};
++
++static u32 mcfcau_rco_tab[10]={ 0x01000000, 0x02000000, 0x04000000, 0x08000000,
++				0x10000000, 0x20000000, 0x40000000, 0x80000000,
++				0x1b000000, 0x36000000};
++
++int mcfcau_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key,
++		       unsigned int key_len)
++{
++	struct mcfcau_aes_ctx *ctx = crypto_tfm_ctx(tfm);
++	const u32 * key = (const u32 *)in_key;
++	u32 *flags = &tfm->crt_flags;
++	u32 i;
++	u32* key_sch = (&ctx->buf[0]);
++	u32 * temp_p, * rcon_p;
++	u32 Nx;
++	u32 Nk;
++	unsigned long iflags;
++
++	DBG("\n");
++
++	if (key_len % 8) {
++		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
++		return -EINVAL;
++	}
++
++	Nk = key_len>>2;
++
++	for(i=0;i<Nk;i++){
++		key_sch[i] = key[i];
++	}
++
++	ctx->Nr_1 = Nk+5;
++
++	/* Key Expansion */
++	temp_p=&key_sch[Nk-1];
++	rcon_p=&mcfcau_rco_tab[0];
++
++	spin_lock_irqsave(&mcfcau_lock, iflags);
++
++	asm volatile ("move.l	%0, %%a1"::"m"(temp_p):"a1");
++	asm volatile ("move.l	%0, %%a3"::"m"(rcon_p):"a3");
++	asm volatile ("move.l	%0, %%a4"::"m"(key_sch):"a4");
++
++	Nx=(Nk+7)<<2; /* (Nr+1)*Nb */
++
++	for(i=Nk; i<Nx; i++)
++	{
++		/* temp = key_sch[Nk-1] */
++		asm volatile ("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CAA):"a1");
++
++		if(i%Nk==0){
++			asm volatile ("moveq	#8, %%d0":::"d0");
++			/* CAA=RotWord(temp) */
++			asm volatile ("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA):"d0");
++			/* SubWord(CAA) */
++			asm volatile ("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_AESS+MCFCAU_CAA));
++			/* ACC xor rcon[i/Nk] */
++			asm volatile ("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CAA):"a3");
++
++		}else if((Nk>6) && (i%Nk ==4)){
++			/* SubWord(ACC) */
++			asm volatile ("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_AESS+MCFCAU_CAA));
++		}
++
++		/* key_sch[i]^=key_sch[i-Nk]; store ACC to key_sch[i] */
++		asm volatile ("cp0ld.l	(%%a4)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CAA):"a4");
++		asm volatile ("cp0st.l	%%d0,(%%a1),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CAA));
++	}
++	spin_unlock_irqrestore(&mcfcau_lock, iflags);
++
++	return 0;
++}
++
++
++/* encrypt a block of text */
++static void mcfcau_aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
++{
++	struct mcfcau_aes_ctx *ctx = crypto_tfm_ctx(tfm);
++	const int Nr_1 = ctx->Nr_1;
++
++	u32* key_sch = &(ctx->buf[0]);
++	u32 i;
++	unsigned long iflags;
++
++	DBG("\n");
++
++	spin_lock_irqsave(&mcfcau_lock, iflags);
++	asm("move.l	%0, %%a1"::"m"(in):"a1");
++	asm("move.l	%0, %%a0"::"m"(key_sch):"a0");
++	/* state=in */
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1");
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a1");
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3):"a1");
++	/* AddRoundKey() */
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0");
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0");
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0");
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0");
++
++	for(i=Nr_1;i>0;i--){
++		/* SubBytes(state) */
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA0));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA1));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA2));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA3));
++		/* ShiftRows(state) */
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESR));
++		/* MixColumns(state); AddRoundKey() */
++		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_AESC+MCFCAU_CA0):"a0");
++		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_AESC+MCFCAU_CA1):"a0");
++		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_AESC+MCFCAU_CA2):"a0");
++		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_AESC+MCFCAU_CA3):"a0");
++	}
++	/* SubBytes(state)*/
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA0));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA3));
++	/* ShiftRows(state) */
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESR));
++	/* AddRoundKey() */
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0");
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0");
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0");
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0");
++	/* out = state */
++	asm("move.l	%0, %%a1"		::"m"(out):"a1");
++	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA0):"d0");
++	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA1):"d1");
++
++	asm("move.l	%%d0,(%%a1)+":::"a1");
++	asm("move.l	%%d1,(%%a1)+":::"a1");
++
++	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"d0");
++	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"d1");
++
++	asm("move.l	%%d0,(%%a1)+":::"a1");
++	asm("move.l	%%d1,(%%a1)+":::"a1");
++	spin_unlock_irqrestore(&mcfcau_lock, iflags);
++}
++
++
++/* decrypt a block of text */
++static void mcfcau_aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
++{
++	struct mcfcau_aes_ctx *ctx = crypto_tfm_ctx(tfm);
++	u32* key_sch = &(ctx->buf[0]);
++	u32 i;
++	unsigned long iflags;
++	const int Nr_1 = ctx->Nr_1;
++	key_sch=&key_sch[(Nr_1+2)*4];
++
++	DBG("\n");
++
++	spin_lock_irqsave(&mcfcau_lock, iflags);
++
++	asm("move.l	%0, %%a1"::"m"(in):"a1");
++	asm("move.l	%0, %%a0"::"m"(key_sch):"a0");
++	/* state=in */
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1");
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a1");
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3):"a1");
++	/* AddRoundKey() */
++	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0");
++	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0");
++	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0");
++	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0");
++
++	for(i=Nr_1;i>0;i--){
++		/* InvShiftRows(state) */
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIR));
++		/* InvSubBytes(state) */
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA3));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA2));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA1));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA0));
++		/* InvMixColumns(state); AddRoundKey() */
++		asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_AESIC+MCFCAU_CA3):"a0");
++		asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_AESIC+MCFCAU_CA2):"a0");
++		asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_AESIC+MCFCAU_CA1):"a0");
++		asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_AESIC+MCFCAU_CA0):"a0");
++	}
++	/* InvShiftRows(state) */
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIR));
++	/* InvSubBytes(state)*/
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA3));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA0));
++	/* AddRoundKey() */
++	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0");
++	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0");
++	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0");
++	asm("cp0ld.l	-(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0");
++	/* out = state */
++	asm("move.l	%0, %%a1"		::"m"(out):"a1");
++	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA0):"d0");
++	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA1):"d1");
++
++	asm("move.l	%%d0,(%%a1)+":::"a1");
++	asm("move.l	%%d1,(%%a1)+":::"a1");
++
++	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"d0");
++	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"d1");
++
++	asm("move.l	%%d0,(%%a1)+":::"a1");
++	asm("move.l	%%d1,(%%a1)+":::"a1");
++	spin_unlock_irqrestore(&mcfcau_lock, iflags);
++
++}
++
++
++static struct crypto_alg mcfcau_aes_alg = {
++	.cra_name		=	"aes",
++	.cra_driver_name	=	"aes-mcfcau",
++	.cra_priority		=	MCFCAU_CRA_PRIORITY,
++	.cra_flags		=	CRYPTO_ALG_TYPE_CIPHER,
++	.cra_blocksize		=	MCFCAU_AES_BLOCK_SIZE,
++	.cra_ctxsize		=	sizeof(struct mcfcau_aes_ctx),
++	.cra_alignmask		=	3,
++	.cra_module		=	THIS_MODULE,
++	.cra_list		=	LIST_HEAD_INIT(mcfcau_aes_alg.cra_list),
++	.cra_u			=	{
++		.cipher = {
++			.cia_min_keysize	=	MCFCAU_AES_MIN_KEY_SIZE,
++			.cia_max_keysize	=	MCFCAU_AES_MAX_KEY_SIZE,
++			.cia_setkey	   	= 	mcfcau_aes_setkey,
++			.cia_encrypt	 	=	mcfcau_aes_encrypt,
++			.cia_decrypt	  	=	mcfcau_aes_decrypt
++		}
++	}
++};
++
++static int __init mcfcau_aes_init(void)
++{
++	int ret = crypto_register_alg(&mcfcau_aes_alg);
++
++	printk(KERN_INFO MCFCAU_AES_DRIVER_DESC " "
++		MCFCAU_AES_DRIVER_VERSION " %s.\n",ret?"failed":"registered");
++	return ret;
++}
++
++static void __exit mcfcau_aes_fini(void)
++{
++	crypto_unregister_alg(&mcfcau_aes_alg);
++	printk(KERN_INFO MCFCAU_AES_DRIVER_DESC " "
++		MCFCAU_AES_DRIVER_VERSION " unregistered.\n");
++}
++
++module_init(mcfcau_aes_init);
++module_exit(mcfcau_aes_fini);
++
++MODULE_DESCRIPTION(MCFCAU_AES_DRIVER_DESC);
++MODULE_LICENSE("Dual BSD/GPL");
++MODULE_AUTHOR("Andrey Butok");
+--- /dev/null
++++ b/drivers/crypto/mcfcau-des.c
+@@ -0,0 +1,437 @@
++/***************************************************************************
++ * mcfcau-des.c - Implementation of DES & Triple DES EDE Cipher Algorithms
++ *                for Freescale ColdFire Cryptographic Acceleration Unit (CAU).
++ *
++ * Author: Andrey Butok
++ * Copyright Freescale Semiconductor Inc.  2007
++ *
++ * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software Foundation,
++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ ***************************************************************************
++ * Changes:
++ * v0.01	14 August 2007	Andrey Butok
++ *   		Initial Release - developed on 2.6.20 Linux kernel.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/errno.h>
++#include <linux/crypto.h>
++#include <linux/types.h>
++
++/*
++#undef DEBUG
++#define DEBUG 1
++*/
++
++#include "mcfcau.h"
++
++#define MCFCAU_DES_KEY_SIZE		(8)
++#define MCFCAU_DES_EXPKEY_WORDS		(32)
++#define MCFCAU_DES_BLOCK_SIZE		(8)
++
++#define MCFCAU_DES3_EDE_KEY_SIZE	(3 * MCFCAU_DES_KEY_SIZE)
++#define MCFCAU_DES3_EDE_EXPKEY_WORDS	(3 * MCFCAU_DES_EXPKEY_WORDS)
++#define MCFCAU_DES3_EDE_BLOCK_SIZE	(MCFCAU_DES_BLOCK_SIZE)
++
++#define	MCFCAU_DES_DRIVER_DESC		"DES & 3DES ColdFire CAU driver"
++#define	MCFCAU_DES_DRIVER_VERSION	"v0.01"
++
++struct mcfcau_des_ctx {
++	u32 expkey[MCFCAU_DES_EXPKEY_WORDS];
++};
++
++struct mcfcau_des3_ede_ctx {
++	u32 expkey[MCFCAU_DES3_EDE_EXPKEY_WORDS];
++};
++
++/* DES round operations */
++static inline void mcfcau_des_encipher(void)
++{
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESK));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_IP+MCFCAU_KSL1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_FP+MCFCAU_KSL1));
++}
++
++static inline void mcfcau_des_decipher(void)
++{
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESK+MCFCAU_DC));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_IP+MCFCAU_KSR1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_FP+MCFCAU_KSL1));
++}
++
++
++static int mcfcau_des_setkey(struct crypto_tfm *tfm, const u8 *key_p,
++		      unsigned int keylen)
++{
++	struct mcfcau_des_ctx *dctx = crypto_tfm_ctx(tfm);
++	u32 *flags = &tfm->crt_flags;
++	u32 * key = (u32 *) key_p;
++
++	DBG("\n");
++
++	/*
++	* RFC2451: Weak key checks SHOULD be performed.
++	*
++	* FIPS 74:
++	*   Keys having duals are keys which produce all zeros, all ones, or
++	*   alternating zero-one patterns in the C and D registers after Permuted
++	*   Choice 1 has operated on the key.
++	*
++	*/
++	if(*flags & CRYPTO_TFM_REQ_WEAK_KEY){ /* FIPS 74 */
++		if(key[0]<0xE001E00l){
++			if(key[0]<0x1FE01FE0){
++				if(key[0]<0x01E001E0){
++					if(((key[0]==0x01010101)&&(key[1]==0x01010101))||
++						((key[0]==0x011F011F)&&(key[1]==0x010E010E)) )
++						goto WEAK_KEY;
++				}
++				else{
++					if(((key[0]==0x01E001E0)&&(key[1]==0x01F101F1))||
++						((key[0]==0x01FE01FE)&&(key[1]==0x01FE01FE)) )
++						goto WEAK_KEY;
++				}
++			}
++			else{
++				if(key[0]<0x1F1F1F1F){
++					if(((key[0]==0x1FE01FE0)&&(key[1]==0x0EF10EF1))||
++						((key[0]==0x1F011F0l)&&(key[1]==0x0E010E01)) )
++						goto WEAK_KEY;
++				}
++				else{
++					if(((key[0]==0x1F1F1F1F)&&(key[1]==0x0E0E0E0E))||
++						((key[0]==0x1FFE1FFE)&&(key[1]==0x0EFE0EFE)) )
++						goto WEAK_KEY;
++				}
++			}
++		} else {
++			if(key[0]<0xFE01FE01){
++				if(key[0]<0xE0E0E0E0){
++					if(((key[0]==0xE001E00l)&&(key[1]==0xF101F101))||
++						((key[0]==0xE01FE01F)&&(key[1]==0xF10EF10E)) )
++						goto WEAK_KEY;
++				}
++				else{
++					if(((key[0]==0xE0E0E0E0)&&(key[1]==0xF1F1F1F1))||
++						((key[0]==0xE0FEE0FE)&&(key[1]==0xF1FEF1FE)) )
++						goto WEAK_KEY;
++				}
++			}
++			else{
++				if(key[0]<0xFEE0FEE0){
++					if(((key[0]==0xFE01FE01)&&(key[1]==0xFE01FE01))||
++						((key[0]==0xFE1FFE1F)&&(key[1]==0xFE0EFE0E)) )
++						goto WEAK_KEY;
++				}
++				else{
++					if(((key[0]==0xFEE0FEE0)&&(key[1]==0xFEF1FEF1))||
++						((key[0]==0xFEFEFEFE)&&(key[1]==0xFEFEFEFE)) )
++						goto WEAK_KEY;
++				}
++			}
++		}
++	}
++	memcpy(dctx->expkey, key_p, keylen);
++	return 0;
++WEAK_KEY:
++	*flags |= CRYPTO_TFM_RES_WEAK_KEY;
++	return -EINVAL;
++}
++
++
++void mcfcau_des_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
++{
++	struct mcfcau_des_ctx *ctx = crypto_tfm_ctx(tfm);
++	u32 * des_key_tmp = ctx->expkey;
++	unsigned long iflags;
++
++	DBG("\n");
++
++	spin_lock_irqsave(&mcfcau_lock, iflags);
++
++	asm("move.l	%0, %%a0"::"m"(src):"a0");
++	asm("move.l	%0, %%a1"::"m"(des_key_tmp):"a1");
++
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0");
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3));
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
++	asm("cp0ld.l	(%%a1),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1));
++
++	mcfcau_des_encipher();
++
++	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"d0");
++	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"d1");
++	asm("move.l	%0, %%a1"		::"m"(dst):"a1");
++	asm("move.l	%d0,(%a1)+");
++	asm("move.l	%d1,(%a1)");
++
++	spin_unlock_irqrestore(&mcfcau_lock, iflags);
++}
++
++
++void mcfcau_des_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
++{
++	struct mcfcau_des_ctx *ctx = crypto_tfm_ctx(tfm);
++	u32 * des_key_tmp = ctx->expkey;
++	unsigned long iflags;
++
++	DBG("\n");
++
++	spin_lock_irqsave(&mcfcau_lock, iflags);
++
++	asm("move.l	%0, %%a0"::"m"(src):"a0");
++	asm("move.l	%0, %%a1"::"m"(des_key_tmp):"a1");
++
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0");
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3));
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
++	asm("cp0ld.l	(%%a1),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1));
++
++	mcfcau_des_decipher();
++
++	asm("move.l	%0, %%a1"		::"m"(dst):"a1");
++	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"d0");
++	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"d1");
++	asm("move.l	%d0,(%a1)+");
++	asm("move.l	%d1,(%a1)");
++
++	spin_unlock_irqrestore(&mcfcau_lock, iflags);
++}
++
++
++/*
++ * RFC2451:
++ *
++ *   For DES-EDE3, there is no known need to reject weak or
++ *   complementation keys.  Any weakness is obviated by the use of
++ *   multiple keys.
++ *
++ *   However, if the first two or last two independent 64-bit keys are
++ *   equal (k1 == k2 or k2 == k3), then the DES3 operation is simply the
++ *   same as DES.  Implementers MUST reject keys that exhibit this
++ *   property.
++ *
++ */
++
++static int mcfcau_des3_ede_setkey(struct crypto_tfm *tfm, const u8 *key_p, unsigned int keylen)
++{
++	const u32 *key = (const u32 *)key_p;
++	struct mcfcau_des3_ede_ctx *dctx = crypto_tfm_ctx(tfm);
++	u32 *flags = &tfm->crt_flags;
++
++DBG("\n");
++
++	if (unlikely(!((key[0] ^ key[2]) | (key[1] ^ key[3])) ||
++		     !((key[2] ^ key[4]) | (key[3] ^ key[5]))))
++	{
++		*flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED;
++		return -EINVAL;
++	}
++
++	memcpy(dctx->expkey,key_p,keylen);
++
++	return 0;
++}
++
++static void mcfcau_des3_ede_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
++{
++	struct mcfcau_des3_ede_ctx *dctx = crypto_tfm_ctx(tfm);
++	const u32 * des_key_tmp = dctx->expkey;
++	unsigned long iflags;
++
++	DBG("\n");
++
++	spin_lock_irqsave(&mcfcau_lock, iflags);
++
++	/*EK1*/
++	asm("move.l	%0, %%a0"::"m"(src):"a0");
++	asm("move.l	%0, %%a1"::"m"(des_key_tmp):"a1");
++
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0");
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3));
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1");
++
++	mcfcau_des_encipher();
++
++	/*DK2*/
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1");
++
++	mcfcau_des_decipher();
++
++	/*EK3*/
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
++	asm("cp0ld.l	(%%a1),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1));
++
++	mcfcau_des_encipher();
++
++	asm("move.l	%0, %%a1"		::"m"(dst):"a1");
++	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"d0");
++	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"d1");
++	asm("move.l	%d0,(%a1)+");
++	asm("move.l	%d1,(%a1)");
++
++	spin_unlock_irqrestore(&mcfcau_lock, iflags);
++}
++
++static void mcfcau_des3_ede_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
++{
++	struct mcfcau_des3_ede_ctx *dctx = crypto_tfm_ctx(tfm);
++	const u32 * des_key_tmp = dctx->expkey + 6 - 2;
++	unsigned long iflags;
++
++	DBG("\n");
++
++	spin_lock_irqsave(&mcfcau_lock, iflags);
++
++	/*DK3*/
++	asm("move.l	%0, %%a0"::"m"(src):"a0");
++	asm("move.l	%0, %%a1"::"m"(des_key_tmp):"a1");
++
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0");
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3));
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
++	asm("cp0ld.l	(%%a1),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1));
++
++	mcfcau_des_decipher();
++
++	/*EK2*/
++	asm("suba.l	#12,%a1");	/*dec key pointer*/
++
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
++	asm("cp0ld.l	(%%a1),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1));
++
++	mcfcau_des_encipher();
++
++	/*DK1*/
++	asm("suba.l	#12,%a1");	/*dec key pointer*/
++
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1");
++	asm("cp0ld.l	(%%a1),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1));
++
++	mcfcau_des_decipher();
++
++	asm("move.l	%0, %%a1"		::"m"(dst):"a1");
++	asm("cp0st.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"d0");
++	asm("cp0st.l	%%d0,%%d1,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"d1");
++	asm("move.l	%d0,(%a1)+");
++	asm("move.l	%d1,(%a1)");
++
++	spin_unlock_irqrestore(&mcfcau_lock, iflags);
++}
++
++
++static struct crypto_alg mcfcau_des_alg = {
++	.cra_name		=	"des",
++	.cra_driver_name	=	"des-mcfcau",
++	.cra_priority		=	MCFCAU_CRA_PRIORITY,
++	.cra_flags		=	CRYPTO_ALG_TYPE_CIPHER,
++	.cra_blocksize		=	MCFCAU_DES_BLOCK_SIZE,
++	.cra_ctxsize		=	sizeof(struct mcfcau_des_ctx),
++	.cra_module		=	THIS_MODULE,
++	.cra_alignmask		=	3,
++	.cra_list		=	LIST_HEAD_INIT(mcfcau_des_alg.cra_list),
++	.cra_u			=	{ .cipher = {
++	.cia_min_keysize	=	MCFCAU_DES_KEY_SIZE,
++	.cia_max_keysize	=	MCFCAU_DES_KEY_SIZE,
++	.cia_setkey		=	mcfcau_des_setkey,
++	.cia_encrypt		=	mcfcau_des_encrypt,
++	.cia_decrypt		=	mcfcau_des_decrypt } }
++};
++
++static struct crypto_alg mcfcau_des3_ede_alg = {
++	.cra_name		=	"des3_ede",
++	.cra_driver_name	=	"des3_ede-mcfcau",
++	.cra_priority		=	MCFCAU_CRA_PRIORITY,
++	.cra_flags		=	CRYPTO_ALG_TYPE_CIPHER,
++	.cra_blocksize		=	MCFCAU_DES3_EDE_BLOCK_SIZE,
++	.cra_ctxsize		=	sizeof(struct mcfcau_des3_ede_ctx),
++	.cra_module		=	THIS_MODULE,
++	.cra_alignmask		=	3,
++	.cra_list		=	LIST_HEAD_INIT(mcfcau_des3_ede_alg.cra_list),
++	.cra_u			=	{ .cipher = {
++	.cia_min_keysize	=	MCFCAU_DES3_EDE_KEY_SIZE,
++	.cia_max_keysize	=	MCFCAU_DES3_EDE_KEY_SIZE,
++	.cia_setkey		=	mcfcau_des3_ede_setkey,
++	.cia_encrypt		=	mcfcau_des3_ede_encrypt,
++	.cia_decrypt		=	mcfcau_des3_ede_decrypt } }
++};
++
++MODULE_ALIAS("mcfcau_des3_ede");
++
++static int __init mcfcau_des_init(void)
++{
++	int ret;
++
++	ret = crypto_register_alg(&mcfcau_des_alg);
++	if (ret < 0)
++		goto out;
++
++	ret = crypto_register_alg(&mcfcau_des3_ede_alg);
++	if (ret < 0)
++		crypto_unregister_alg(&mcfcau_des_alg);
++out:
++	printk(KERN_INFO MCFCAU_DES_DRIVER_DESC " "
++		MCFCAU_DES_DRIVER_VERSION " %s.\n",ret?"failed":"registered");
++	return ret;
++}
++
++static void __exit mcfcau_des_exit(void)
++{
++	crypto_unregister_alg(&mcfcau_des3_ede_alg);
++	crypto_unregister_alg(&mcfcau_des_alg);
++
++	printk(KERN_INFO MCFCAU_DES_DRIVER_DESC " "
++		MCFCAU_DES_DRIVER_VERSION " unregistered.\n");
++}
++
++module_init(mcfcau_des_init);
++module_exit(mcfcau_des_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms for ColdFire CAU");
++MODULE_AUTHOR("Andrey Butok");
+--- /dev/null
++++ b/drivers/crypto/mcfcau-md5.c
+@@ -0,0 +1,654 @@
++ /***************************************************************************
++ * mcfcau-md5.c - Implementation of MD5 Message Digest Algorithm (RFC1321)
++ *                for Freescale ColdFire Cryptographic Acceleration Unit (CAU).
++ *
++ * Author: Andrey Butok
++ * Copyright Freescale Semiconductor Inc.  2007
++ *
++ * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software Foundation,
++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ ***************************************************************************
++ * Changes:
++ * v0.01	30 September 2007	Andrey Butok
++ *   		Initial Release - developed on 2.6.20 Linux kernel.
++ */
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/string.h>
++#include <linux/crypto.h>
++#include <linux/types.h>
++#include <asm/byteorder.h>
++
++/*
++#undef DEBUG
++#define DEBUG 1
++*/
++
++#include "mcfcau.h"
++
++
++#define MCFCAU_MD5_DIGEST_SIZE		(16)
++#define MCFCAU_MD5_HMAC_BLOCK_SIZE	(64)
++#define MCFCAU_MD5_BLOCK_WORDS		(16)
++#define MCFCAU_MD5_HASH_WORDS		(4)
++
++#define	MCFCAU_MD5_DRIVER_DESC		"MD5 ColdFire CAU driver"
++#define	MCFCAU_MD5_DRIVER_VERSION	"v0.01"
++
++
++struct mcfcau_md5_ctx {
++	u32 hash[MCFCAU_MD5_HASH_WORDS];
++	u32 block[MCFCAU_MD5_BLOCK_WORDS];
++	u64 byte_count;
++};
++
++u32 mcfcau_md5_t[64]={0xd76aa478, 0xe8c7b756, 0x242070db, 0xc1bdceee,
++			0xf57c0faf, 0x4787c62a, 0xa8304613, 0xfd469501,
++			0x698098d8, 0x8b44f7af, 0xffff5bb1, 0x895cd7be,
++			0x6b901122, 0xfd987193, 0xa679438e, 0x49b40821,
++			0xf61e2562, 0xc040b340, 0x265e5a51, 0xe9b6c7aa,
++			0xd62f105d, 0x02441453, 0xd8a1e681, 0xe7d3fbc8,
++			0x21e1cde6, 0xc33707d6, 0xf4d50d87, 0x455a14ed,
++			0xa9e3e905, 0xfcefa3f8, 0x676f02d9, 0x8d2a4c8a,
++			0xfffa3942, 0x8771f681, 0x6d9d6122, 0xfde5380c,
++			0xa4beea44, 0x4bdecfa9, 0xf6bb4b60, 0xbebfbc70,
++			0x289b7ec6, 0xeaa127fa, 0xd4ef3085, 0x04881d05,
++			0xd9d4d039, 0xe6db99e5, 0x1fa27cf8, 0xc4ac5665,
++			0xf4292244, 0x432aff97, 0xab9423a7, 0xfc93a039,
++			0x655b59c3, 0x8f0ccc92, 0xffeff47d, 0x85845dd1,
++			0x6fa87e4f, 0xfe2ce6e0, 0xa3014314, 0x4e0811a1,
++			0xf7537e82, 0xbd3af235, 0x2ad7d2bb, 0xeb86d391};
++
++
++
++static void mcfcau_md5_transform(u32 *hash, u32 const *in)
++{
++	int i;
++	u32 * md5_t_p=&mcfcau_md5_t[0];
++	unsigned long iflags;
++
++	spin_lock_irqsave(&mcfcau_lock, iflags);
++	asm("move.l	%0, %%a1"::"m"(hash):"a1");
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CAA):"a1");/*a*/
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1");/*b*/
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a1");/*c*/
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3):"a1");/*d*/
++	asm("move.l	%0, %%a0"::"m"(in):"a0");	/* X[] */
++	asm("move.l	%0, %%a3"::"m"(md5_t_p):"a3");	/* T[] */
++
++	
++	/*  Round 1 */
++	asm("moveq.l	#7, %%d4":::"d4");	/* for rotating by 7 */
++	asm("moveq.l	#12, %%d5":::"d5");	/* for rotating by 12 */
++	asm("moveq.l	#17, %%d6":::"d6");	/* for rotating by 17 */
++	asm("moveq.l	#22, %%d7":::"d7");	/* for rotating by 22 */
++
++	for(i=0; i<4;i++){
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFF));		/* a+F(b,c,d) */
++		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");	/* add byterev x[i] */
++		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");	/* add t[i] */
++		asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));		/* rotate by 7 */
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));		/* add b */
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));			/* register to register shift */
++
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFF));
++		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++		asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFF));
++		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++		asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFF));
++		asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++		asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++	};
++
++
++	/* Round 2 */
++	asm("moveq.l	#5, %%d4":::"d4");	/* for rotating by 5 */
++	asm("moveq.l	#9, %%d5":::"d5");	/* for rotating by 9 */
++	asm("moveq.l	#14, %%d6":::"d6");	/* for rotating by 14 */
++	asm("moveq.l	#20, %%d7":::"d7");	/* for rotating by 20 */
++
++	asm("lea -60(%%a0),%%a0":::"a0");
++
++	for(i=0; i<2;i++){
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
++		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++		asm("lea	20(%%a0),%%a0"		:::"a0");
++		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++		asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
++		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++		asm("lea	20(%%a0),%%a0"		:::"a0");
++		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++		asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
++		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++		asm("lea	-44(%%a0),%%a0"		:::"a0");
++		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++		asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
++		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++		asm("lea	20(%%a0),%%a0"		:::"a0");
++		asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++		asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++	};
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	20(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	-44(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	20(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	20(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	-44(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	20(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	20(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFG));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	-28(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++
++	/* Round 3 */
++	asm("moveq.l	#4, %%d4":::"d4");	/* for rotating by 5 */
++	asm("moveq.l	#11, %%d5":::"d5");	/* for rotating by 9 */
++	asm("moveq.l	#16, %%d6":::"d6");	/* for rotating by 14 */
++	asm("moveq.l	#23, %%d7":::"d7");	/* for rotating by 20 */
++
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	12(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	12(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	12(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	-52(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	12(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	12(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	12(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	12(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	-52(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	12(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	12(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	12(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	12(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	12(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	-52(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	-8(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	
++	/* Round 4 */
++	asm("moveq.l	#6, %%d4":::"d4");	/* for rotating by 6 */
++	asm("moveq.l	#10, %%d5":::"d5");	/* for rotating by 10 */
++	asm("moveq.l	#15, %%d6":::"d6");	/* for rotating by 15 */
++	asm("moveq.l	#21, %%d7":::"d7");	/* for rotating by 21 */
++
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	28(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	28(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	-36(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	28(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	-36(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	28(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	-36(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	28(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	28(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	-36(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	28(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	-36(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	28(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d4,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	-36(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d5,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	28(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d6,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFI));
++	asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0");
++	asm("lea	28(%%a0),%%a0"		:::"a0");
++	asm("cp0ld.l	(%%a3)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3");
++	asm("cp0ld.l	%%d7,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA1));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MDS));
++
++	
++	asm("move.l	%0, %%a1"::"m"(hash):"a1");
++
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1");/*a*/
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA1):"a1");/*b*/
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA2):"a1");/*c*/
++	asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA3):"a1");/*d*/
++
++	asm("cp0st.l	%%d0,-(%%a1),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"a1");/*d*/
++	asm("cp0st.l	%%d0,-(%%a1),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"a1");/*c*/
++	asm("cp0st.l	%%d0,-(%%a1),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA1):"a1");/*b*/
++	asm("cp0st.l	%%d0,-(%%a1),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CAA):"a1");/*a*/
++	spin_unlock_irqrestore(&mcfcau_lock, iflags);
++}
++
++static inline void le32_to_cpu_array(u32 *buf, unsigned int words)
++{
++	while (words--) {
++		__le32_to_cpus(buf);
++		buf++;
++	}
++}
++
++static inline void cpu_to_le32_array(u32 *buf, unsigned int words)
++{
++	while (words--) {
++		__cpu_to_le32s(buf);
++		buf++;
++	}
++}
++
++static void mcfcau_md5_initialization(struct crypto_tfm *tfm)
++{
++	struct mcfcau_md5_ctx *mctx = crypto_tfm_ctx(tfm);
++
++	DBG("\n");
++	mctx->hash[0] = 0x67452301;
++	mctx->hash[1] = 0xefcdab89;
++	mctx->hash[2] = 0x98badcfe;
++	mctx->hash[3] = 0x10325476;
++	mctx->byte_count = 0;
++}
++
++static void mcfcau_md5_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len)
++{
++	struct mcfcau_md5_ctx *mctx = crypto_tfm_ctx(tfm);
++	const u32 avail = sizeof(mctx->block) - (mctx->byte_count & 0x3f);
++
++	DBG("\n");
++	mctx->byte_count += len;
++
++	if (avail > len) {
++		memcpy((char *)mctx->block + (sizeof(mctx->block) - avail),
++		       data, len);
++	}
++	else {
++		memcpy((char *)mctx->block + (sizeof(mctx->block) - avail), data, avail);
++
++		mcfcau_md5_transform(mctx->hash, mctx->block);
++		data += avail;
++		len -= avail;
++
++		while (len >= sizeof(mctx->block)) {
++			memcpy(mctx->block, data, sizeof(mctx->block));
++			mcfcau_md5_transform(mctx->hash, mctx->block);
++			data += sizeof(mctx->block);
++			len -= sizeof(mctx->block);
++		}
++
++		memcpy(mctx->block, data, len);
++	}
++}
++
++static void mcfcau_md5_final(struct crypto_tfm *tfm, u8 *out)
++{
++	struct mcfcau_md5_ctx *mctx = crypto_tfm_ctx(tfm);
++	const unsigned int offset = mctx->byte_count & 0x3f;
++	char *p = (char *)mctx->block + offset;
++	int padding = 56 - (offset + 1);
++
++	DBG("\n");
++
++	*p++ = 0x80;
++	if (padding < 0) {
++		memset(p, 0x00, padding + sizeof (u64));
++		mcfcau_md5_transform(mctx->hash, mctx->block);
++		p = (char *)mctx->block;
++		padding = 56;
++	}
++
++	memset(p, 0, padding);
++	mctx->block[14] = mctx->byte_count << 3;
++	mctx->block[15] = mctx->byte_count >> 29;
++	le32_to_cpu_array(&mctx->block[14], 2);
++
++	mcfcau_md5_transform(mctx->hash, mctx->block);
++
++	cpu_to_le32_array(mctx->hash, sizeof(mctx->hash) / sizeof(u32));
++	memcpy(out, mctx->hash, sizeof(mctx->hash));
++	memset(mctx, 0, sizeof(*mctx));
++}
++
++static struct crypto_alg mcfcau_md5_alg = {
++	.cra_name		=	"md5",
++	.cra_driver_name	=	"md5-mcfcau",
++	.cra_priority		=	MCFCAU_CRA_PRIORITY,
++	.cra_flags		=	CRYPTO_ALG_TYPE_DIGEST,
++	.cra_blocksize		=	MCFCAU_MD5_HMAC_BLOCK_SIZE,
++	.cra_ctxsize		=	sizeof(struct mcfcau_md5_ctx),
++	.cra_module		=	THIS_MODULE,
++	.cra_list		=	LIST_HEAD_INIT(mcfcau_md5_alg.cra_list),
++	.cra_u			=	{ .digest = {
++	.dia_digestsize		=	MCFCAU_MD5_DIGEST_SIZE,
++	.dia_init   		= 	mcfcau_md5_initialization,
++	.dia_update 		=	mcfcau_md5_update,
++	.dia_final  		=	mcfcau_md5_final } }
++};
++
++static int __init mcfcau_md5_init(void)
++{
++	int ret = crypto_register_alg(&mcfcau_md5_alg);
++	printk(KERN_INFO MCFCAU_MD5_DRIVER_DESC " "
++		MCFCAU_MD5_DRIVER_VERSION " %s.\n",ret?"failed":"registered");
++	return ret;
++}
++
++static void __exit mcfcau_md5_exit(void)
++{
++	crypto_unregister_alg(&mcfcau_md5_alg);
++	printk(KERN_INFO MCFCAU_MD5_DRIVER_DESC " "
++		MCFCAU_MD5_DRIVER_VERSION " unregistered.\n");
++}
++
++module_init(mcfcau_md5_init);
++module_exit(mcfcau_md5_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION(MCFCAU_MD5_DRIVER_DESC);
++MODULE_AUTHOR("Andrey Butok");
+--- /dev/null
++++ b/drivers/crypto/mcfcau-sha1.c
+@@ -0,0 +1,280 @@
++ /***************************************************************************
++ * mcfcau-sha1.c - Implementation of SHA1 Secure Hash Algorithm
++ *                for Freescale ColdFire Cryptographic Acceleration Unit (CAU).
++ *
++ * Author: Andrey Butok
++ * Copyright Freescale Semiconductor Inc.  2007
++ *
++ * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software Foundation,
++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ ***************************************************************************
++ * Changes:
++ * v0.01	15 October 2007	Andrey Butok
++ *   		Initial Release - developed on 2.6.20 Linux kernel.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mm.h>
++#include <linux/crypto.h>
++#include <linux/types.h>
++
++
++/*
++#undef DEBUG
++#define DEBUG 1
++*/
++
++#include "mcfcau.h"
++
++#define MCFCAU_SHA1_DIGEST_WORDS	(5)
++#define MCFCAU_SHA1_WORKSPACE_WORDS	(80)
++
++#define MCFCAU_SHA1_DIGEST_SIZE		(20)
++#define MCFCAU_SHA1_HMAC_BLOCK_SIZE	(64)
++
++#define	MCFCAU_SHA1_DRIVER_DESC		"SHA1 ColdFire CAU driver"
++#define	MCFCAU_SHA1_DRIVER_VERSION	"v0.01"
++
++struct mcfcau_sha1_ctx {
++        u64 count;
++        u32 state[5];
++        u8 buffer[64];
++};
++
++const static u32 K[4]={0x5A827999L,	/* Rounds  0-19: sqrt(2) * 2^30 */
++			0x6ED9EBA1L,	/* Rounds 20-39: sqrt(3) * 2^30 */
++			0x8F1BBCDCL,	/* Rounds 40-59: sqrt(5) * 2^30 */
++			0xCA62C1D6L};	/* Rounds 60-79: sqrt(10) * 2^30 */
++
++static void noinline mcfcau_sha1_transform(__u32 *digest, const char *in, __u32 *W)
++{
++	int i;
++	u32 * tmp_p;
++	unsigned long iflags;
++
++	/* (a) Devide M(i) into 16 words W */
++	for (i = 0; i < 16; i++)
++		W[i] = ((const u32 *)in)[i];
++
++	/* (b) W[i+16] = S^1(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i]) */
++	tmp_p=&W[16];
++
++	spin_lock_irqsave(&mcfcau_lock, iflags);
++	asm("move.l	%0, %%a0"::"m"(tmp_p):"a0");
++	asm("moveq.l	#1, %%d3":::"d3");
++
++	for (i = 0; i < 64; i++){
++		asm("cp0ld.l	-64(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0));
++		asm("cp0ld.l	-56(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA0));
++		asm("cp0ld.l	-32(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA0));
++		asm("cp0ld.l	-12(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_XOR+MCFCAU_CA0));
++		asm("cp0ld.l	%%d3,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CA0):"d3");
++		asm("cp0st.l	%%d0,(%%a0)+,#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA0));
++	}
++
++	/* (c) */
++	asm("move.l	%0, %%a0"::"m"(digest):"a0");
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA0):"a0"); /* a */
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA1):"a0"); /* b */
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0"); /* c */
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA3):"a0"); /* d */
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_LDR+MCFCAU_CA4):"a0"); /* e */
++
++	/* (d) */
++	asm("moveq.l	#5, %%d0":::"d0");
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_MVRA+MCFCAU_CA0));
++	asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ROTL+MCFCAU_CAA)); /*S^5(A)*/
++
++	tmp_p=(u32*)K;
++	asm("move.l	%0, %%a0"::"m"(tmp_p):"a0");
++	asm("move.l	%0, %%a1"::"m"(W):"a1");
++
++	for (i = 0; i < 20; i++) {
++		/* t = f1(b, c, d) + K1 + rol32(a, 5) + e + W[i]; */
++		/* e = d; d = c; c = rol32(b, 30); b = a; a = t; */
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFC)); /*f(b,c,d)*/
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/
++		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/
++		asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_SHS));
++	}
++
++	asm("add.l #4,%%a0"	:::"a0"); /* update K */
++
++	for (; i < 40; i ++) {
++		/* t = f2(b, c, d) + K2 + rol32(a, 5) + e + W[i]; */
++		/* e = d; d = c; c = rol32(b, 30); b = a; a = t; */
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH)); /*f(b,c,d)*/
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/
++		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/
++		asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_SHS));
++	}
++
++	asm("add.l #4,%%a0"	:::"a0"); /* update K */
++
++	for (; i < 60; i ++) {
++		/* t = f3(b, c, d) + K3 + rol32(a, 5) + e + W[i]; */
++		/* e = d; d = c; c = rol32(b, 30); b = a; a = t; */
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFM)); /*f(b,c,d)*/
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/
++		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/
++		asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_SHS));
++	}
++
++	asm("add.l #4,%%a0"	:::"a0"); /* update K */
++
++	for (; i < 80; i ++) {
++		/* t = f2(b, c, d) + K4 + rol32(a, 5) + e + W[i]; */
++		/* e = d; d = c; c = rol32(b, 30); b = a; a = t; */
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_HASH+MCFCAU_HFH)); /*f(b,c,d)*/
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/
++		asm("cp0ld.l	(%%a0),%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/
++		asm("cp0ld.l	(%%a1)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/
++		asm("cp0ld.l	%%d0,%%d0,#1,%0"	::"n"(MCFCAU_SHS));
++	}
++
++	/* (e) */
++	asm("move.l	%0, %%a0"::"m"(digest):"a0");
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA0):"a0"); /* +a */
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA1):"a0"); /* +b */
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA2):"a0"); /* +c */
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA3):"a0"); /* +d */
++	asm("cp0ld.l	(%%a0)+,%%d0,#1,%0"	::"n"(MCFCAU_ADR+MCFCAU_CA4):"a0"); /* +e */
++
++	asm("cp0st.l	%%d0,-(%%a0),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA4):"a0");
++	asm("cp0st.l	%%d0,-(%%a0),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA3):"a0");
++	asm("cp0st.l	%%d0,-(%%a0),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA2):"a0");
++	asm("cp0st.l	%%d0,-(%%a0),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA1):"a0");
++	asm("cp0st.l	%%d0,-(%%a0),#1,%0"	::"n"(MCFCAU_STR+MCFCAU_CA0):"a0");
++	spin_unlock_irqrestore(&mcfcau_lock, iflags);
++}
++
++static void mcfcau_sha1_init(struct crypto_tfm *tfm)
++{
++	struct mcfcau_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
++	static const struct mcfcau_sha1_ctx initstate = {
++	  0,
++	  { 0x67452301, 0xEFCDAB89, 0x98BADCFE, 0x10325476, 0xC3D2E1F0 },
++	  { 0, }
++	};
++
++	*sctx = initstate;
++}
++
++static void mcfcau_sha1_update(struct crypto_tfm *tfm, const u8 *data,
++			unsigned int len)
++{
++	struct mcfcau_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
++	unsigned int partial, done;
++	const u8 *src;
++
++	partial = sctx->count & 0x3f;
++	sctx->count += len;
++	done = 0;
++	src = data;
++
++	if ((partial + len) > 63) {
++		u32 temp[MCFCAU_SHA1_WORKSPACE_WORDS];
++
++		if (partial) {
++			done = -partial;
++			memcpy(sctx->buffer + partial, data, done + 64);
++			src = sctx->buffer;
++		}
++
++		do {
++			mcfcau_sha1_transform(sctx->state, src, temp);
++			done += 64;
++			src = data + done;
++		} while (done + 63 < len);
++
++		memset(temp, 0, sizeof(temp));
++		partial = 0;
++	}
++	memcpy(sctx->buffer + partial, src, len - done);
++}
++
++
++/* Add padding and return the message digest. */
++static void mcfcau_sha1_final(struct crypto_tfm *tfm, u8 *out)
++{
++	struct mcfcau_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
++	u32 *dst = (u32 *)out;
++	u32 i, index, padlen;
++	u64 bits;
++	static const u8 padding[64] = { 0x80, };
++
++	bits = sctx->count << 3;
++
++	/* Pad out to 56 mod 64 */
++	index = sctx->count & 0x3f;
++	padlen = (index < 56) ? (56 - index) : ((64+56) - index);
++	mcfcau_sha1_update(tfm, padding, padlen);
++
++	/* Append length */
++	mcfcau_sha1_update(tfm, (const u8 *)&bits, sizeof(bits));
++
++	/* Store state in digest */
++	for (i = 0; i < 5; i++)
++		dst[i] = sctx->state[i];
++
++
++	/* Wipe context */
++	memset(sctx, 0, sizeof *sctx);
++}
++
++static struct crypto_alg mcfcau_sha1_alg = {
++	.cra_name	=	"sha1",
++	.cra_driver_name=	"sha1-mcfcau",
++	.cra_priority	=	MCFCAU_CRA_PRIORITY,
++	.cra_flags	=	CRYPTO_ALG_TYPE_DIGEST,
++	.cra_blocksize	=	MCFCAU_SHA1_HMAC_BLOCK_SIZE,
++	.cra_ctxsize	=	sizeof(struct mcfcau_sha1_ctx),
++	.cra_module	=	THIS_MODULE,
++	.cra_alignmask	=	3,
++	.cra_list       =       LIST_HEAD_INIT(mcfcau_sha1_alg.cra_list),
++	.cra_u		=	{ .digest = {
++	.dia_digestsize	=	MCFCAU_SHA1_DIGEST_SIZE,
++	.dia_init   	= 	mcfcau_sha1_init,
++	.dia_update 	=	mcfcau_sha1_update,
++	.dia_final  	=	mcfcau_sha1_final } }
++};
++
++static int __init init(void)
++{
++	int ret = crypto_register_alg(&mcfcau_sha1_alg);
++	printk(KERN_INFO MCFCAU_SHA1_DRIVER_DESC " "
++		MCFCAU_SHA1_DRIVER_VERSION " %s.\n",ret?"failed":"registered");
++	return ret;
++}
++
++static void __exit fini(void)
++{
++	crypto_unregister_alg(&mcfcau_sha1_alg);
++	printk(KERN_INFO MCFCAU_SHA1_DRIVER_DESC " "
++		MCFCAU_SHA1_DRIVER_VERSION " unregistered.\n");
++}
++
++module_init(init);
++module_exit(fini);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION(MCFCAU_SHA1_DRIVER_DESC);
++MODULE_AUTHOR("Andrey Butok");
+--- /dev/null
++++ b/drivers/crypto/mcfcau.c
+@@ -0,0 +1,32 @@
++/***************************************************************************
++ * mcfcau.c - Implementation of DES & Triple DES EDE Cipher Algorithms
++ *                for Freescale ColdFire Cryptographic Acceleration Unit (CAU).
++ *
++ * Author: Andrey Butok
++ * Copyright Freescale Semiconductor Inc.  2007
++ *
++ * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software Foundation,
++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ ***************************************************************************
++ * Changes:
++ * v0.01	28 September 2006	Andrey Butok
++ *   		Initial Release - developed on 2.6.20 Linux kernel.
++ */
++#include <linux/module.h>
++
++DEFINE_SPINLOCK(mcfcau_lock);
++EXPORT_SYMBOL(mcfcau_lock);
+--- /dev/null
++++ b/drivers/crypto/mcfcau.h
+@@ -0,0 +1,98 @@
++/***************************************************************************
++ * mcfcau.h - Common header file for Freescale ColdFire
++ *            Cryptographic Acceleration Unit (CAU) drivers.
++ *
++ * Author: Andrey Butok
++ * Copyright Freescale Semiconductor Inc.  2007
++ *
++ * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software Foundation,
++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ ***************************************************************************
++ * Changes:
++ * v0.01	14 August 2007	Andrey Butok
++ */
++
++#ifndef MCFCAU_H
++#define MCFCAU_H
++
++#include <linux/spinlock.h>
++
++/* CAU Registers (CAx) */
++#define MCFCAU_CASR		(0x0)
++#define MCFCAU_CAA		(0x1)
++#define MCFCAU_CA0		(0x2)
++#define MCFCAU_CA1		(0x3)
++#define MCFCAU_CA2		(0x4)
++#define MCFCAU_CA3		(0x5)
++#define MCFCAU_CA4		(0x6)
++#define MCFCAU_CA5		(0x7)
++
++ /* CAU Commands */
++#define MCFCAU_CNOP		(0x000)
++#define MCFCAU_LDR		(0x010)
++#define MCFCAU_STR		(0x020)
++#define MCFCAU_ADR		(0x030)
++#define MCFCAU_RADR		(0x040)
++#define MCFCAU_ADRA		(0x050)
++#define MCFCAU_XOR		(0x060)
++#define MCFCAU_ROTL		(0x070)
++#define MCFCAU_MVRA		(0x080)
++#define MCFCAU_MVAR		(0x090)
++#define MCFCAU_AESS		(0x0A0)
++#define MCFCAU_AESIS		(0x0B0)
++#define MCFCAU_AESC		(0x0C0)
++#define MCFCAU_AESIC		(0x0D0)
++#define MCFCAU_AESR		(0x0E0)
++#define MCFCAU_AESIR		(0x0F0)
++#define MCFCAU_DESR		(0x100)
++#define MCFCAU_DESK		(0x110)
++#define MCFCAU_HASH		(0x120)
++#define MCFCAU_SHS		(0x130)
++#define MCFCAU_MDS		(0x140)
++#define MCFCAU_ILL		(0x1F0)
++
++/* DESR Fields */
++#define MCFCAU_IP		(0x08)	/* initial permutation */
++#define MCFCAU_FP		(0x04)	/* final permutation */
++#define MCFCAU_KSL1		(0x00)	/* key schedule left 1 bit */
++#define MCFCAU_KSL2		(0x01)	/* key schedule left 2 bits */
++#define MCFCAU_KSR1		(0x02)	/* key schedule right 1 bit */
++#define MCFCAU_KSR2		(0x03)	/* key schedule right 2 bits */
++
++/* DESK Field */
++#define MCFCAU_DC		(0x01)	/* decrypt key schedule */
++#define MCFCAU_CP		(0x02)	/* check parity */
++
++/* HASH Functions Codes */
++#define MCFCAU_HFF		(0x0)	/* MD5 F() CA1&CA2 | ~CA1&CA3 */
++#define MCFCAU_HFG		(0x1)	/* MD5 G() CA1&CA3 | CA2&~CA3 */
++#define MCFCAU_HFH		(0x2)	/* MD5 H(), SHA Parity() CA1^CA2^CA3 */
++#define MCFCAU_HFI		(0x3)	/* MD5 I() CA2^(CA1|~CA3) */
++#define MCFCAU_HFC		(0x4)	/* SHA Ch() CA1&CA2 ^ ~CA1&CA3 */
++#define MCFCAU_HFM		(0x5)	/* SHA Maj() CA1&CA2 ^ CA1&CA3 ^ CA2&CA3 */
++
++#define MCFCAU_CRA_PRIORITY	(300)
++
++extern spinlock_t mcfcau_lock;
++
++#ifdef DEBUG
++#define DBG(fmt, args...)	printk( "[%s]  " fmt , __FUNCTION__, ## args)
++#else
++#define DBG(fmt, args...)	do{}while(0)
++#endif
++
++#endif
diff --git a/target/linux/coldfire/patches/016-m5445x_usb_initial_port.patch b/target/linux/coldfire/patches/016-m5445x_usb_initial_port.patch
new file mode 100644
index 0000000000..4321794413
--- /dev/null
+++ b/target/linux/coldfire/patches/016-m5445x_usb_initial_port.patch
@@ -0,0 +1,7360 @@
+From 6694c72448723499ce8a8603b4830bbd9d2fa0df Mon Sep 17 00:00:00 2001
+From: Bruce Schmid <duck@freescale.com>
+Date: Tue, 20 Nov 2007 11:06:14 -0700
+Subject: [PATCH] USB: initial port
+
+LTIBName: m5445x-usb-initial-port
+Signed-off-by: Duck <duck@freescale.com>
+---
+ arch/m68k/coldfire/usb.c            |  182 +++
+ arch/m68k/coldfire/usb/Makefile     |   28 +
+ arch/m68k/coldfire/usb/otg_cmn.c    |  106 ++
+ arch/m68k/coldfire/usb/otg_device.c |   89 ++
+ arch/m68k/coldfire/usb/otg_host.c   |   68 +
+ arch/m68k/coldfire/usb/otg_otg.c    |   96 ++
+ arch/m68k/coldfire/usb/xcvr.c       |  156 ++
+ drivers/usb/Kconfig                 |    1 +
+ drivers/usb/Makefile                |    2 +
+ drivers/usb/core/usb.c              |    2 +-
+ drivers/usb/gadget/Kconfig          |   43 +-
+ drivers/usb/gadget/Makefile         |    1 +
+ drivers/usb/gadget/ether.c          |    3 +
+ drivers/usb/gadget/fsl_usb2_udc.h   |  194 +---
+ drivers/usb/gadget/gadget_chips.h   |    7 +
+ drivers/usb/gadget/mcf5445x_udc.c   | 2758 +++++++++++++++++++++++++++++++++++
+ drivers/usb/host/Kconfig            |   21 +-
+ drivers/usb/host/ehci-arc.c         |  431 ++++++
+ drivers/usb/host/ehci-fsl.h         |   28 +-
+ drivers/usb/host/ehci-hcd.c         |    5 +
+ drivers/usb/host/ehci-mem.c         |    9 +-
+ drivers/usb/host/ehci.h             |   22 +
+ drivers/usb/otg/Makefile            |    5 +
+ drivers/usb/otg/fsl_otg.c           | 1515 +++++++++++++++++++
+ drivers/usb/otg/fsl_otg.h           |  139 ++
+ drivers/usb/otg/otg_fsm.c           |  381 +++++
+ drivers/usb/otg/otg_fsm.h           |  170 +++
+ include/asm-m68k/mcf5445x_usb.h     |    3 +-
+ include/linux/fsl_devices.h         |   42 +-
+ include/linux/usb/fsl_usb2.h        |  464 ++++++
+ include/linux/usb/fsl_xcvr.h        |   42 +
+ 31 files changed, 6809 insertions(+), 204 deletions(-)
+ create mode 100644 arch/m68k/coldfire/usb.c
+ create mode 100644 arch/m68k/coldfire/usb/Makefile
+ create mode 100644 arch/m68k/coldfire/usb/otg_cmn.c
+ create mode 100644 arch/m68k/coldfire/usb/otg_device.c
+ create mode 100644 arch/m68k/coldfire/usb/otg_host.c
+ create mode 100644 arch/m68k/coldfire/usb/otg_otg.c
+ create mode 100644 arch/m68k/coldfire/usb/xcvr.c
+ create mode 100644 drivers/usb/gadget/mcf5445x_udc.c
+ create mode 100644 drivers/usb/host/ehci-arc.c
+ create mode 100644 drivers/usb/otg/Makefile
+ create mode 100644 drivers/usb/otg/fsl_otg.c
+ create mode 100644 drivers/usb/otg/fsl_otg.h
+ create mode 100644 drivers/usb/otg/otg_fsm.c
+ create mode 100644 drivers/usb/otg/otg_fsm.h
+ create mode 100644 include/linux/usb/fsl_usb2.h
+ create mode 100644 include/linux/usb/fsl_xcvr.h
+
+--- /dev/null
++++ b/arch/m68k/coldfire/usb.c
+@@ -0,0 +1,182 @@
++/*
++ *
++ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
++ *
++ *	otg_{get,set}_transceiver() are from arm/plat-omap/usb.c.
++ *	which is Copyright (C) 2004 Texas Instruments, Inc.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/err.h>
++#include <linux/platform_device.h>
++#include <linux/usb/otg.h>
++#include <linux/delay.h>
++#include <linux/fsl_devices.h>
++#include <linux/usb/fsl_xcvr.h>
++
++
++/* The dmamask must be set for EHCI to work */
++static u64 ehci_dmamask = ~(u32) 0;
++
++struct fsl_xcvr_ops *xc_ops[3] = { NULL };
++
++void fsl_usb_enable_clk(void)
++{
++}
++EXPORT_SYMBOL(fsl_usb_enable_clk);
++
++void fsl_usb_disable_clk(void)
++{
++}
++EXPORT_SYMBOL(fsl_usb_disable_clk);
++
++void fsl_usb_xcvr_register(struct fsl_xcvr_ops *xcvr_ops)
++{
++	pr_debug("%s ctrlr=%d\n", __FUNCTION__, xcvr_ops->ctrlr);
++	xc_ops[xcvr_ops->ctrlr] = xcvr_ops;
++
++}
++EXPORT_SYMBOL(fsl_usb_xcvr_register);
++
++void fsl_usb_xcvr_unregister(enum fsl_usb_ctrlr ctrlr)
++{
++	pr_debug("%s ctrlr=%d\n", __FUNCTION__, ctrlr);
++	xc_ops[ctrlr] = NULL;
++}
++EXPORT_SYMBOL(fsl_usb_xcvr_unregister);
++
++/*!
++ * Register an instance of a USB host platform device.
++ *
++ * @param	res:	resource pointer
++ * @param       n_res:	number of resources
++ * @param       config: config pointer
++ *
++ * @return      newly-registered platform_device
++ *
++ * DDD fix this comment:
++ * The USB controller supports 3 host interfaces, and the
++ * kernel can be configured to support some number of them.
++ * Each supported host interface is registered as an instance
++ * of the "fsl-ehci" device.  Call this function multiple times
++ * to register each host interface.
++ */
++static int instance_id;
++struct platform_device *host_pdev_register(struct resource *res, int n_res,
++					  struct fsl_usb2_platform_data *config)
++{
++	struct platform_device *pdev;
++
++	pr_debug("register host res=0x%p, size=%d\n", res, n_res);
++
++	pdev = platform_device_register_simple("fsl-ehci",
++					       instance_id, res, n_res);
++	if (IS_ERR(pdev)) {
++		printk(KERN_ERR "usb: can't register %s Host, %ld\n",
++		       config->name, PTR_ERR(pdev));
++		return NULL;
++	}
++
++	pdev->dev.coherent_dma_mask = 0xffffffff;
++	pdev->dev.dma_mask = &ehci_dmamask;
++
++	/*
++	 * platform_device_add_data() makes a copy of
++	 * the platform_data passed in.  That makes it
++	 * impossible to share the same config struct for
++	 * all OTG devices (host,gadget,otg).  So, just
++	 * set the platform_data pointer ourselves.
++	 */
++	pdev->dev.platform_data = config;
++
++	printk(KERN_INFO "usb: %s Host registered\n", config->name);
++	pr_debug("pdev=0x%p  dev=0x%p  resources=0x%p  pdata=0x%p\n",
++		 pdev, &pdev->dev, pdev->resource, pdev->dev.platform_data);
++
++	instance_id++;
++
++	return pdev;
++}
++
++
++int fsl_usb_mem_init(struct platform_device *pdev)
++{
++	struct resource *res;
++	struct fsl_usb2_platform_data *pdata;
++
++	pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
++
++	pr_debug("%s: pdev=0x%p  pdata=0x%p\n", __FUNCTION__, pdev, pdata);
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res) {
++		dev_err(&pdev->dev, "no MEM resource.\n");
++		return -ENODEV;
++	}
++
++	pdata->r_start = res->start;
++	pdata->r_len = res->end - res->start + 1;
++	pr_debug("%s: MEM resource start=0x%x  len=0x%x\n", pdata->name,
++		 res->start, pdata->r_len);
++
++	if (!request_mem_region(pdata->r_start, pdata->r_len, "OTG")) {
++		dev_err(&pdev->dev, "request_mem_region failed\n");
++		return -EBUSY;
++	}
++	pdata->regs = ioremap(pdata->r_start, pdata->r_len);
++	pr_debug("ioremapped to 0x%p\n", pdata->regs);
++
++	if (pdata->regs == NULL) {
++		dev_err(&pdev->dev, "ioremap failed\n");
++		release_mem_region(pdata->r_start, pdata->r_len);
++		return -EFAULT;
++	}
++
++	pr_debug("%s: success\n", __FUNCTION__);
++	return 0;
++}
++
++
++#if defined(CONFIG_USB_OTG)
++static struct otg_transceiver *xceiv;
++
++/**
++ * otg_get_transceiver - find the (single) OTG transceiver driver
++ *
++ * Returns the transceiver driver, after getting a refcount to it; or
++ * null if there is no such transceiver.  The caller is responsible for
++ * releasing that count.
++ */
++struct otg_transceiver *otg_get_transceiver(void)
++{
++	pr_debug("%s xceiv=0x%p\n", __FUNCTION__, xceiv);
++	if (xceiv)
++		get_device(xceiv->dev);
++	return xceiv;
++}
++EXPORT_SYMBOL(otg_get_transceiver);
++
++int otg_set_transceiver(struct otg_transceiver *x)
++{
++	pr_debug("%s xceiv=0x%p  x=0x%p\n", __FUNCTION__, xceiv, x);
++	if (xceiv && x)
++		return -EBUSY;
++	xceiv = x;
++	return 0;
++}
++EXPORT_SYMBOL(otg_set_transceiver);
++#endif
+--- /dev/null
++++ b/arch/m68k/coldfire/usb/Makefile
+@@ -0,0 +1,28 @@
++#
++# Makefile for the linux kernel.
++#
++
++# Object file lists.
++
++ifneq ($(CONFIG_USB_EHCI_HCD),)
++	obj-y	+= otg_host.o
++endif
++
++ifneq ($(CONFIG_USB_GADGET_MCF5445X),)
++	obj-y	+= otg_device.o
++endif
++
++ifneq ($(strip $(CONFIG_USB_GADGET_MCF5445X) $(CONFIG_USB_EHCI_HCD)),)
++	obj-y	+= otg_cmn.o
++endif
++
++ifneq ($(CONFIG_USB_OTG),)
++	obj-y	+= otg_otg.o
++endif
++
++
++# USB Transceiver driver:
++ifneq ($(strip $(CONFIG_USB) $(CONFIG_USB_GADGET_MCF5445X)),)
++	obj-y	+= xcvr.o
++endif
++
+--- /dev/null
++++ b/arch/m68k/coldfire/usb/otg_cmn.c
+@@ -0,0 +1,106 @@
++/*
++ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/err.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/irq.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/fsl_devices.h>
++#include <linux/usb/fsl_xcvr.h>
++
++#include <asm/system.h>
++#include <asm/coldfire.h>
++
++extern void fsl_usb_enable_clk(void);
++extern void fsl_usb_disable_clk(void);
++extern int fsl_usb_mem_init(struct platform_device *pdev);
++
++extern struct fsl_xcvr_ops *xc_ops[];
++
++static int otg_used;
++
++int usbotg_init(struct platform_device *pdev)
++{
++	struct fsl_usb2_platform_data *pdata;
++	struct fsl_xcvr_ops *xops = xc_ops[USB_CTRLR_OTG];
++	int rc;
++
++	pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
++
++	pr_debug("%s: pdev=0x%p  pdata=0x%p\n", __FUNCTION__, pdev, pdata);
++
++	if (!xops) {
++		printk(KERN_ERR "OTG transceiver ops missing\n");
++		return -EINVAL;
++	}
++	pdata->xcvr_ops = xops;
++	pdata->xcvr_type = xops->xcvr_type;
++
++	if (!otg_used) {
++		/* request_mem_region and ioremap registers */
++		rc = fsl_usb_mem_init(pdev);
++		if (rc)
++			return rc;
++
++		fsl_usb_enable_clk();
++
++		if (xops->init)
++			xops->init(pdev);
++	}
++
++	otg_used++;
++	pr_debug("%s: success\n", __FUNCTION__);
++	return 0;
++}
++
++void usbotg_uninit(struct platform_device *pdev)
++{
++	struct fsl_usb2_platform_data *pdata;
++	pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
++
++	pr_debug("%s\n", __FUNCTION__);
++
++	otg_used--;
++	if (!otg_used) {
++		if (pdata->xcvr_ops && pdata->xcvr_ops->uninit)
++			pdata->xcvr_ops->uninit(pdev);
++
++		iounmap(pdata->regs);
++		release_mem_region(pdata->r_start, pdata->r_len);
++
++		pdata->regs = NULL;
++		pdata->r_start = pdata->r_len = 0;
++
++		fsl_usb_disable_clk();
++	}
++}
++
++struct fsl_usb2_platform_data mxc_otg_config = {
++	.name            = "OTG",
++	.platform_init   = usbotg_init,
++	.platform_uninit = usbotg_uninit,
++	.es              = 1,
++	.big_endian_mmio = 1,
++	.big_endian_desc = 1,
++	.le_setup_buf    = 1,
++	.does_otg        = 1,
++	.power_budget    = 500,		/* 500 mA max power */
++	.max_ep_nr       = 4,		/* DDD read from a register ? */
++	.phy_mode	 = FSL_USB2_PHY_ULPI, /* DDD redundant with xcvr_type */
++};
+--- /dev/null
++++ b/arch/m68k/coldfire/usb/otg_device.c
+@@ -0,0 +1,89 @@
++/*
++ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/irq.h>
++#include <linux/err.h>
++#include <linux/platform_device.h>
++#include <linux/usb/otg.h>
++#include <linux/delay.h>
++#include <linux/fsl_devices.h>
++#include <linux/usb/fsl_xcvr.h>
++
++#include <asm/system.h>
++#include <asm/coldfire.h>
++
++#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000)
++#define INT_USB		(64 + 64 + 47)	/* INTC1:47 16.2.9.1 */
++#define INT_UOCSR	(64 + 64 + 53)	/* INTC1:53 16.2.9.1 */
++
++extern int usbotg_init(struct platform_device *pdev);
++extern void usbotg_uninit(struct fsl_usb2_platform_data *pdata);
++extern struct fsl_usb2_platform_data mxc_otg_config;
++
++struct platform_device otg_udc_device;
++
++/*!
++ * OTG Gadget device
++ */
++
++static void usb_release(struct device *dev)
++{
++	/* normally not freed */
++}
++
++static u64 udc_dmamask = ~(u32) 0;
++static struct resource otg_udc_resources[] = {
++	[0] = {
++		.start = (u32) (&USB_OTGREGS_BASE),
++		.end   = (u32) (&USB_OTGREGS_BASE + 0x1ff),
++		.flags = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start = INT_USB,
++		.flags = IORESOURCE_IRQ,
++	},
++};
++
++
++struct platform_device otg_udc_device = {
++	.name = "fsl-usb2-udc",
++	.id   = -1,
++	.dev  = {
++		.release           = usb_release,
++		.dma_mask          = &udc_dmamask,
++		.coherent_dma_mask = 0xffffffff,
++		.platform_data     = &mxc_otg_config,
++		},
++	.resource = otg_udc_resources,
++	.num_resources = ARRAY_SIZE(otg_udc_resources),
++};
++
++static int __init udc_init(void)
++{
++	int rc __attribute((unused));
++
++	rc = platform_device_register(&otg_udc_device);
++	if (rc)
++		printk(KERN_ERR "usb: can't register OTG Gadget, rc=%d\n", rc);
++	else
++		printk(KERN_INFO "usb: OTG Gadget registered\n");
++	return rc;
++}
++
++subsys_initcall(udc_init);
+--- /dev/null
++++ b/arch/m68k/coldfire/usb/otg_host.c
+@@ -0,0 +1,68 @@
++/*
++ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/irq.h>
++#include <linux/err.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/fsl_devices.h>
++#include <linux/usb/fsl_xcvr.h>
++
++#include <asm/system.h>
++#include <asm/mcfsim.h>
++
++#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000)
++#define INT_USB		(64 + 64 + 47)	/* INTC1:47 16.2.9.1 */
++#define INT_UOCSR	(64 + 64 + 53)	/* INTC1:53 16.2.9.1 */
++
++struct platform_device *otg_host_device;
++
++extern struct platform_device *host_pdev_register(struct resource *res,
++						  int n_res,
++						  struct fsl_usb2_platform_data
++						  *config);
++
++extern int usbotg_init(struct platform_device *pdev);
++extern void usbotg_uninit(struct fsl_usb2_platform_data *pdata);
++extern struct fsl_usb2_platform_data mxc_otg_config;
++
++/*!
++ * OTG host config
++ */
++static struct resource otg_host_resources[] = {
++	[0] = {
++		.start = (u32) (&USB_OTGREGS_BASE),
++		.end   = (u32) (&USB_OTGREGS_BASE + 0x1ff),
++		.flags = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start = INT_USB,
++		.flags = IORESOURCE_IRQ,
++	},
++};
++
++static int __init otg_host_init(void)
++{
++	otg_host_device = host_pdev_register(otg_host_resources,
++					     ARRAY_SIZE(otg_host_resources),
++					     &mxc_otg_config);
++	return 0;
++}
++
++subsys_initcall(otg_host_init);
+--- /dev/null
++++ b/arch/m68k/coldfire/usb/otg_otg.c
+@@ -0,0 +1,96 @@
++/*
++ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/*
++ * platform_device registration for ULPI OTG device
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/err.h>
++#include <linux/platform_device.h>
++#include <linux/fsl_devices.h>
++
++#include <asm/mcfsim.h>
++
++#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000)
++#define INT_USB		(64 + 64 + 47)	/* INTC1:47 16.2.9.1 */
++#define INT_UOCSR	(64 + 64 + 53)	/* INTC1:53 16.2.9.1 */
++
++extern int usbotg_init(struct platform_device *pdev);
++extern void usbotg_uninit(struct fsl_usb2_platform_data *pdata);
++extern struct fsl_usb2_platform_data mxc_otg_config;
++
++static void otg_otg_release(struct device *dev)
++{
++	/* normally not freed */
++}
++
++/* *INDENT-OFF* */
++static struct resource otg_otg_resources[] = {
++	[0] = {
++		.start = (u32) (&USB_OTGREGS_BASE),
++		.end   = (u32) (&USB_OTGREGS_BASE + 0x1ff),
++		.flags = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start = INT_USB,
++		.flags = IORESOURCE_IRQ,
++	},
++};
++
++/*!
++ * OTG device
++ */
++static u64 otg_otg_dmamask = ~(u32) 0;
++static struct platform_device otg_otg_device = {
++	.name = "fsl-usb2-otg",
++	.id   = -1,
++	.dev  = {
++		.release           = otg_otg_release,
++		.dma_mask          = &otg_otg_dmamask,
++		.coherent_dma_mask = 0xffffffff,
++		.platform_data     = &mxc_otg_config,
++	},
++	.resource = otg_otg_resources,
++	.num_resources = ARRAY_SIZE(otg_otg_resources),
++};
++/* *INDENT-ON* */
++
++static int __init mx31_otg_otg_init(void)
++{
++	int rc = 0;
++
++	pr_debug("register OTG otg res=0x%p, size=%d\n",
++		 otg_otg_device.resource, otg_otg_device.num_resources);
++
++	rc = platform_device_register(&otg_otg_device);
++	if (rc) {
++		pr_debug("can't register ULPI OTG dvc, %d\n", rc);
++	} else {
++		printk(KERN_INFO "usb: OTG ULPI transceiver registered\n");
++		pr_debug("otg_otg_device=0x%p  resources=0x%p.\n",
++			 &otg_otg_device, otg_otg_device.resource);
++	}
++
++	return rc;
++}
++
++subsys_initcall(mx31_otg_otg_init);
++
++MODULE_AUTHOR("Freescale Semiconductor, Inc.");
++MODULE_DESCRIPTION("ULPI OTG device registration");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/arch/m68k/coldfire/usb/xcvr.c
+@@ -0,0 +1,156 @@
++/*
++ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/err.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/fsl_devices.h>
++#include <linux/usb/fsl_xcvr.h>
++#include <linux/usb/fsl_usb2.h>
++
++#include <asm/mcfsim.h>
++
++extern void fsl_usb_xcvr_register(struct fsl_xcvr_ops *xcvr_ops);
++extern void fsl_usb_xcvr_unregister(enum fsl_usb_ctrlr ctrlr);
++
++#define MCF_SCM_BCR		MCF_REG32(0xFC040024)
++#define MCF_SCM_BCR_GBR		(1 << 9)	/* global bursts for read */
++#define MCF_SCM_BCR_GBW		(1 << 8)	/* global bursts for write */
++#define MCF_SCM_BCR_SBE_ALL	(0xff << 0)	/* slave burst enable */
++
++
++#ifdef ULPI_DEBUG
++void print_ulpi_regs(void)
++{
++	pr_debug("MCF_SCM_BCR=0x%08lx  MCF_CCM_MISCCR=0x%08x  "
++		 "MCF_GPIO_PAR_DMA=0x%08x  MCF_GPIO_PAR_USB=08%08x  "
++		 "MCF_GPIO_PAR_FEC=08%08x\n",
++		 MCF_SCM_BCR, MCF_CCM_MISCCR, MCF_GPIO_PAR_DMA,
++		 MCF_GPIO_PAR_USB, MCF_GPIO_PAR_FEC);
++}
++EXPORT_SYMBOL(print_ulpi_regs);
++#endif
++
++
++static void xcvr_init(struct platform_device *pdev)
++{
++	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
++	struct fsl_xcvr_ops *this = pdata->xcvr_ops;
++	struct fsl_usb_host_regs *regs = pdata->regs;
++
++	pr_debug("%s: ctrlr=%d  pdata=0x%p  regs=0x%p\n", __FUNCTION__,
++		 this->ctrlr, pdata, pdata->regs);
++
++	/* enable USB read, write and slave bursts */
++	MCF_SCM_BCR = MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW | MCF_SCM_BCR_SBE_ALL;
++
++	/* Use external clock source if PLL isn't a multiple of 60MHz */
++	MCF_CCM_MISCCR &= ~MCF_CCM_MISCCR_USBSRC;
++
++	/* Initialize the USB Clock: use USB input clock */
++	MCF_GPIO_PAR_DMA = (MCF_GPIO_PAR_DMA & MCF_GPIO_PAR_DMA_DREQ1_MASK) |
++			   MCF_GPIO_PAR_DMA_DREQ1_USB_CLKIN;
++
++	switch (this->xcvr_type) {
++	case PORTSCX_PTS_ULPI:
++		/* Enable the required ULPI signals */
++		MCF_GPIO_PAR_DMA = (MCF_GPIO_PAR_DMA &
++				    MCF_GPIO_PAR_DMA_DACK1_MASK) |
++				    MCF_GPIO_PAR_DMA_DACK1_ULPI_DIR;
++
++		MCF_GPIO_PAR_USB = MCF_GPIO_PAR_USB_VBUSEN_ULPI_NXT |
++				   MCF_GPIO_PAR_USB_VBUSOC_ULPI_STP;
++
++		MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC &
++				    MCF_GPIO_PAR_FEC_FEC0_MASK) |
++				    MCF_GPIO_PAR_FEC_FEC0_RMII_ULPI;
++		break;
++	case PORTSCX_PTS_ONCHIP:
++		/* Enable VBUS_EN and VBUS_OC signals */
++		MCF_GPIO_PAR_USB = MCF_GPIO_PAR_USB_VBUSEN_VBUSEN |
++				   MCF_GPIO_PAR_USB_VBUSOC_VBUSOC;
++
++		/* Setup USB_VBUS_OC signal to be active-low */
++		MCF_CCM_MISCCR |= MCF_CCM_MISCCR_USBOC;
++
++		break;
++	}
++
++	pr_debug("&regs->portsc1=0x%p  old portsc1=0x%x \n", &regs->portsc1,
++		 regs->portsc1);
++
++	regs->portsc1 &= ~PORTSCX_PTS_MASK;
++	regs->portsc1 |= this->xcvr_type;
++
++	/*
++	 * need to reset the controller here so that the ID pin
++	 * is correctly detected.
++	 */
++	regs->usbcmd |= USB_CMD_CTRL_RESET;
++
++	/*
++	 * allow controller to reset, and leave time for
++	 * the ULPI transceiver to reset too.
++	 */
++	mdelay(10);
++
++	pr_debug("DDD %s: done.  portsc1=0x%x\n", __FUNCTION__, regs->portsc1);
++}
++
++static void xcvr_uninit(struct platform_device *pdev)
++{
++	pr_debug("%s: pdev=0x%p\n", __FUNCTION__, pdev);
++}
++
++
++struct fsl_xcvr_ops xcvr_ops_otg = {
++	.ctrlr          = USB_CTRLR_OTG,
++	.init           = xcvr_init,
++	.uninit         = xcvr_uninit,
++
++#ifdef CONFIG_USB_M5445X_ULPI
++	.xcvr_type      = PORTSCX_PTS_ULPI,
++#elif defined CONFIG_USB_M5445X_FSLS
++	.xcvr_type      = PORTSCX_PTS_ONCHIP,
++#else
++#error "Invalid USB transceiver selection."
++#endif
++};
++
++static int __init usb_xcvr_init(void)
++{
++	pr_debug("%s\n", __FUNCTION__);
++
++	fsl_usb_xcvr_register(&xcvr_ops_otg);
++
++	pr_debug("%s done\n", __FUNCTION__);
++	return 0;
++}
++
++static void __exit usb_xcvr_exit(void)
++{
++	fsl_usb_xcvr_unregister(USB_CTRLR_OTG);
++}
++
++module_init(usb_xcvr_init);
++module_exit(usb_xcvr_exit);
++
++MODULE_AUTHOR("Freescale Semiconductor, Inc.");
++MODULE_DESCRIPTION("External ULPI xcvr driver");
++MODULE_LICENSE("GPL");
++
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -55,6 +55,7 @@ config USB_ARCH_HAS_EHCI
+ 	default y if PPC_83xx
+ 	default y if SOC_AU1200
+ 	default y if ARCH_IXP4XX
++	default y if M54455
+ 	default PCI
+ 
+ # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -32,3 +32,5 @@ obj-$(CONFIG_USB)		+= misc/
+ 
+ obj-$(CONFIG_USB_ATM)		+= atm/
+ obj-$(CONFIG_USB_SPEEDTOUCH)	+= atm/
++
++obj-$(CONFIG_USB_OTG)		+= otg/
+--- a/drivers/usb/core/usb.c
++++ b/drivers/usb/core/usb.c
+@@ -52,7 +52,7 @@ static int nousb;	/* Disable USB when bu
+ struct workqueue_struct *ksuspend_usb_wq;
+ 
+ #ifdef	CONFIG_USB_SUSPEND
+-static int usb_autosuspend_delay = 2;		/* Default delay value,
++static int usb_autosuspend_delay = -1;		/* Default delay value,
+ 						 * in seconds */
+ module_param_named(autosuspend, usb_autosuspend_delay, int, 0644);
+ MODULE_PARM_DESC(autosuspend, "default autosuspend delay");
+--- a/drivers/usb/gadget/Kconfig
++++ b/drivers/usb/gadget/Kconfig
+@@ -231,6 +231,26 @@ config SUPERH_BUILT_IN_M66592
+ 	   However, this problem is improved if change a value of
+ 	   NET_IP_ALIGN to 4.
+ 
++config USB_GADGET_MCF5445X
++	boolean "MCF5445X USB Device Controller"
++	depends on M54455 && USB_M5445X_ULPI
++	select USB_GADGET_DUALSPEED
++	help
++	   Freescale's MCF5445X processors include
++	   an integrated device controller (as part of the OTG module).
++	   It has four programmable, bidirectional endpoints,
++	   including endpoint 0.
++
++	   Say "y" to link the driver statically, or "m" to build a
++	   dynamically linked module called "mcf5445_udc" and force all
++	   gadget drivers to also be dynamically linked.
++
++config USB_MCF5445X
++	tristate
++	depends on USB_GADGET_MCF5445X
++	default USB_GADGET
++	select USB_GADGET_SELECTED
++
+ config USB_GADGET_GOKU
+ 	boolean "Toshiba TC86C001 'Goku-S'"
+ 	depends on PCI
+@@ -285,17 +305,6 @@ config USB_OMAP
+ 	default USB_GADGET
+ 	select USB_GADGET_SELECTED
+ 
+-config USB_OTG
+-	boolean "OTG Support"
+-	depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD
+-	help
+-	   The most notable feature of USB OTG is support for a
+-	   "Dual-Role" device, which can act as either a device
+-	   or a host.  The initial role choice can be changed
+-	   later, when two dual-role devices talk to each other.
+-
+-	   Select this only if your OMAP board has a Mini-AB connector.
+-
+ config USB_GADGET_S3C2410
+ 	boolean "S3C2410 USB Device Controller"
+ 	depends on ARCH_S3C2410
+@@ -369,6 +378,18 @@ config USB_DUMMY_HCD
+ 
+ endchoice
+ 
++config USB_OTG
++	boolean "OTG Support"
++	depends on (USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD) || \
++		   (USB_GADGET_MCF5445X && USB_M5445X_ULPI)
++	help
++	   The most notable feature of USB OTG is support for a
++	   "Dual-Role" device, which can act as either a device
++	   or a host.  The initial role choice can be changed
++	   later, when two dual-role devices talk to each other.
++
++	   Select this only if your OMAP board has a Mini-AB connector.
++
+ config USB_GADGET_DUALSPEED
+ 	bool
+ 	depends on USB_GADGET
+--- a/drivers/usb/gadget/Makefile
++++ b/drivers/usb/gadget/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_USB_AT91)		+= at91_udc.o
+ obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
+ obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
+ obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
++obj-$(CONFIG_USB_MCF5445X)	+= mcf5445x_udc.o
+ 
+ #
+ # USB gadget drivers
+--- a/drivers/usb/gadget/ether.c
++++ b/drivers/usb/gadget/ether.c
+@@ -287,6 +287,9 @@ MODULE_PARM_DESC(host_addr, "Host Ethern
+ #define	DEV_CONFIG_CDC
+ #endif
+ 
++#ifdef CONFIG_USB_GADGET_MCF5445X
++#define DEV_CONFIG_CDC
++#endif
+ 
+ /*-------------------------------------------------------------------------*/
+ 
+--- a/drivers/usb/gadget/fsl_usb2_udc.h
++++ b/drivers/usb/gadget/fsl_usb2_udc.h
+@@ -83,16 +83,6 @@ struct usb_dr_host {
+ 	u32 endptctrl[6];	/* Endpoint Control Registers */
+ };
+ 
+- /* non-EHCI USB system interface registers (Big Endian) */
+-struct usb_sys_interface {
+-	u32 snoop1;
+-	u32 snoop2;
+-	u32 age_cnt_thresh;	/* Age Count Threshold Register */
+-	u32 pri_ctrl;		/* Priority Control Register */
+-	u32 si_ctrl;		/* System Interface Control Register */
+-	u8 res[236];
+-	u32 control;		/* General Purpose Control Register */
+-};
+ 
+ /* ep0 transfer state */
+ #define WAIT_FOR_SETUP          0
+@@ -101,10 +91,6 @@ struct usb_sys_interface {
+ #define WAIT_FOR_OUT_STATUS     3
+ #define DATA_STATE_RECV         4
+ 
+-/* Device Controller Capability Parameter register */
+-#define DCCPARAMS_DC				0x00000080
+-#define DCCPARAMS_DEN_MASK			0x0000001f
+-
+ /* Frame Index Register Bit Masks */
+ #define	USB_FRINDEX_MASKS			0x3fff
+ /* USB CMD  Register Bit Masks */
+@@ -180,172 +166,6 @@ struct usb_sys_interface {
+ /* endpoint list address bit masks */
+ #define USB_EP_LIST_ADDRESS_MASK              0xfffff800
+ 
+-/* PORTSCX  Register Bit Masks */
+-#define  PORTSCX_CURRENT_CONNECT_STATUS       0x00000001
+-#define  PORTSCX_CONNECT_STATUS_CHANGE        0x00000002
+-#define  PORTSCX_PORT_ENABLE                  0x00000004
+-#define  PORTSCX_PORT_EN_DIS_CHANGE           0x00000008
+-#define  PORTSCX_OVER_CURRENT_ACT             0x00000010
+-#define  PORTSCX_OVER_CURRENT_CHG             0x00000020
+-#define  PORTSCX_PORT_FORCE_RESUME            0x00000040
+-#define  PORTSCX_PORT_SUSPEND                 0x00000080
+-#define  PORTSCX_PORT_RESET                   0x00000100
+-#define  PORTSCX_LINE_STATUS_BITS             0x00000C00
+-#define  PORTSCX_PORT_POWER                   0x00001000
+-#define  PORTSCX_PORT_INDICTOR_CTRL           0x0000C000
+-#define  PORTSCX_PORT_TEST_CTRL               0x000F0000
+-#define  PORTSCX_WAKE_ON_CONNECT_EN           0x00100000
+-#define  PORTSCX_WAKE_ON_CONNECT_DIS          0x00200000
+-#define  PORTSCX_WAKE_ON_OVER_CURRENT         0x00400000
+-#define  PORTSCX_PHY_LOW_POWER_SPD            0x00800000
+-#define  PORTSCX_PORT_FORCE_FULL_SPEED        0x01000000
+-#define  PORTSCX_PORT_SPEED_MASK              0x0C000000
+-#define  PORTSCX_PORT_WIDTH                   0x10000000
+-#define  PORTSCX_PHY_TYPE_SEL                 0xC0000000
+-
+-/* bit 11-10 are line status */
+-#define  PORTSCX_LINE_STATUS_SE0              0x00000000
+-#define  PORTSCX_LINE_STATUS_JSTATE           0x00000400
+-#define  PORTSCX_LINE_STATUS_KSTATE           0x00000800
+-#define  PORTSCX_LINE_STATUS_UNDEF            0x00000C00
+-#define  PORTSCX_LINE_STATUS_BIT_POS          10
+-
+-/* bit 15-14 are port indicator control */
+-#define  PORTSCX_PIC_OFF                      0x00000000
+-#define  PORTSCX_PIC_AMBER                    0x00004000
+-#define  PORTSCX_PIC_GREEN                    0x00008000
+-#define  PORTSCX_PIC_UNDEF                    0x0000C000
+-#define  PORTSCX_PIC_BIT_POS                  14
+-
+-/* bit 19-16 are port test control */
+-#define  PORTSCX_PTC_DISABLE                  0x00000000
+-#define  PORTSCX_PTC_JSTATE                   0x00010000
+-#define  PORTSCX_PTC_KSTATE                   0x00020000
+-#define  PORTSCX_PTC_SEQNAK                   0x00030000
+-#define  PORTSCX_PTC_PACKET                   0x00040000
+-#define  PORTSCX_PTC_FORCE_EN                 0x00050000
+-#define  PORTSCX_PTC_BIT_POS                  16
+-
+-/* bit 27-26 are port speed */
+-#define  PORTSCX_PORT_SPEED_FULL              0x00000000
+-#define  PORTSCX_PORT_SPEED_LOW               0x04000000
+-#define  PORTSCX_PORT_SPEED_HIGH              0x08000000
+-#define  PORTSCX_PORT_SPEED_UNDEF             0x0C000000
+-#define  PORTSCX_SPEED_BIT_POS                26
+-
+-/* bit 28 is parallel transceiver width for UTMI interface */
+-#define  PORTSCX_PTW                          0x10000000
+-#define  PORTSCX_PTW_8BIT                     0x00000000
+-#define  PORTSCX_PTW_16BIT                    0x10000000
+-
+-/* bit 31-30 are port transceiver select */
+-#define  PORTSCX_PTS_UTMI                     0x00000000
+-#define  PORTSCX_PTS_ULPI                     0x80000000
+-#define  PORTSCX_PTS_FSLS                     0xC0000000
+-#define  PORTSCX_PTS_BIT_POS                  30
+-
+-/* otgsc Register Bit Masks */
+-#define  OTGSC_CTRL_VUSB_DISCHARGE            0x00000001
+-#define  OTGSC_CTRL_VUSB_CHARGE               0x00000002
+-#define  OTGSC_CTRL_OTG_TERM                  0x00000008
+-#define  OTGSC_CTRL_DATA_PULSING              0x00000010
+-#define  OTGSC_STS_USB_ID                     0x00000100
+-#define  OTGSC_STS_A_VBUS_VALID               0x00000200
+-#define  OTGSC_STS_A_SESSION_VALID            0x00000400
+-#define  OTGSC_STS_B_SESSION_VALID            0x00000800
+-#define  OTGSC_STS_B_SESSION_END              0x00001000
+-#define  OTGSC_STS_1MS_TOGGLE                 0x00002000
+-#define  OTGSC_STS_DATA_PULSING               0x00004000
+-#define  OTGSC_INTSTS_USB_ID                  0x00010000
+-#define  OTGSC_INTSTS_A_VBUS_VALID            0x00020000
+-#define  OTGSC_INTSTS_A_SESSION_VALID         0x00040000
+-#define  OTGSC_INTSTS_B_SESSION_VALID         0x00080000
+-#define  OTGSC_INTSTS_B_SESSION_END           0x00100000
+-#define  OTGSC_INTSTS_1MS                     0x00200000
+-#define  OTGSC_INTSTS_DATA_PULSING            0x00400000
+-#define  OTGSC_INTR_USB_ID                    0x01000000
+-#define  OTGSC_INTR_A_VBUS_VALID              0x02000000
+-#define  OTGSC_INTR_A_SESSION_VALID           0x04000000
+-#define  OTGSC_INTR_B_SESSION_VALID           0x08000000
+-#define  OTGSC_INTR_B_SESSION_END             0x10000000
+-#define  OTGSC_INTR_1MS_TIMER                 0x20000000
+-#define  OTGSC_INTR_DATA_PULSING              0x40000000
+-
+-/* USB MODE Register Bit Masks */
+-#define  USB_MODE_CTRL_MODE_IDLE              0x00000000
+-#define  USB_MODE_CTRL_MODE_DEVICE            0x00000002
+-#define  USB_MODE_CTRL_MODE_HOST              0x00000003
+-#define  USB_MODE_CTRL_MODE_RSV               0x00000001
+-#define  USB_MODE_SETUP_LOCK_OFF              0x00000008
+-#define  USB_MODE_STREAM_DISABLE              0x00000010
+-/* Endpoint Flush Register */
+-#define EPFLUSH_TX_OFFSET		      0x00010000
+-#define EPFLUSH_RX_OFFSET		      0x00000000
+-
+-/* Endpoint Setup Status bit masks */
+-#define  EP_SETUP_STATUS_MASK                 0x0000003F
+-#define  EP_SETUP_STATUS_EP0		      0x00000001
+-
+-/* ENDPOINTCTRLx  Register Bit Masks */
+-#define  EPCTRL_TX_ENABLE                     0x00800000
+-#define  EPCTRL_TX_DATA_TOGGLE_RST            0x00400000	/* Not EP0 */
+-#define  EPCTRL_TX_DATA_TOGGLE_INH            0x00200000	/* Not EP0 */
+-#define  EPCTRL_TX_TYPE                       0x000C0000
+-#define  EPCTRL_TX_DATA_SOURCE                0x00020000	/* Not EP0 */
+-#define  EPCTRL_TX_EP_STALL                   0x00010000
+-#define  EPCTRL_RX_ENABLE                     0x00000080
+-#define  EPCTRL_RX_DATA_TOGGLE_RST            0x00000040	/* Not EP0 */
+-#define  EPCTRL_RX_DATA_TOGGLE_INH            0x00000020	/* Not EP0 */
+-#define  EPCTRL_RX_TYPE                       0x0000000C
+-#define  EPCTRL_RX_DATA_SINK                  0x00000002	/* Not EP0 */
+-#define  EPCTRL_RX_EP_STALL                   0x00000001
+-
+-/* bit 19-18 and 3-2 are endpoint type */
+-#define  EPCTRL_EP_TYPE_CONTROL               0
+-#define  EPCTRL_EP_TYPE_ISO                   1
+-#define  EPCTRL_EP_TYPE_BULK                  2
+-#define  EPCTRL_EP_TYPE_INTERRUPT             3
+-#define  EPCTRL_TX_EP_TYPE_SHIFT              18
+-#define  EPCTRL_RX_EP_TYPE_SHIFT              2
+-
+-/* SNOOPn Register Bit Masks */
+-#define  SNOOP_ADDRESS_MASK                   0xFFFFF000
+-#define  SNOOP_SIZE_ZERO                      0x00	/* snooping disable */
+-#define  SNOOP_SIZE_4KB                       0x0B	/* 4KB snoop size */
+-#define  SNOOP_SIZE_8KB                       0x0C
+-#define  SNOOP_SIZE_16KB                      0x0D
+-#define  SNOOP_SIZE_32KB                      0x0E
+-#define  SNOOP_SIZE_64KB                      0x0F
+-#define  SNOOP_SIZE_128KB                     0x10
+-#define  SNOOP_SIZE_256KB                     0x11
+-#define  SNOOP_SIZE_512KB                     0x12
+-#define  SNOOP_SIZE_1MB                       0x13
+-#define  SNOOP_SIZE_2MB                       0x14
+-#define  SNOOP_SIZE_4MB                       0x15
+-#define  SNOOP_SIZE_8MB                       0x16
+-#define  SNOOP_SIZE_16MB                      0x17
+-#define  SNOOP_SIZE_32MB                      0x18
+-#define  SNOOP_SIZE_64MB                      0x19
+-#define  SNOOP_SIZE_128MB                     0x1A
+-#define  SNOOP_SIZE_256MB                     0x1B
+-#define  SNOOP_SIZE_512MB                     0x1C
+-#define  SNOOP_SIZE_1GB                       0x1D
+-#define  SNOOP_SIZE_2GB                       0x1E	/* 2GB snoop size */
+-
+-/* pri_ctrl Register Bit Masks */
+-#define  PRI_CTRL_PRI_LVL1                    0x0000000C
+-#define  PRI_CTRL_PRI_LVL0                    0x00000003
+-
+-/* si_ctrl Register Bit Masks */
+-#define  SI_CTRL_ERR_DISABLE                  0x00000010
+-#define  SI_CTRL_IDRC_DISABLE                 0x00000008
+-#define  SI_CTRL_RD_SAFE_EN                   0x00000004
+-#define  SI_CTRL_RD_PREFETCH_DISABLE          0x00000002
+-#define  SI_CTRL_RD_PREFEFETCH_VAL            0x00000001
+-
+-/* control Register Bit Masks */
+-#define  USB_CTRL_IOENB                       0x00000004
+-#define  USB_CTRL_ULPI_INT0EN                 0x00000001
+ 
+ /* Endpoint Queue Head data struct
+  * Rem: all the variables of qh are LittleEndian Mode
+@@ -477,7 +297,10 @@ struct fsl_udc {
+ 	unsigned int irq;
+ 
+ 	struct usb_ctrlrequest local_setup_buff;
+-	spinlock_t lock;
++	spinlock_t lock;		/* udc lock */
++	struct fsl_usb2_platform_data *pdata;
++	u32 xcvr_type;
++
+ 	struct otg_transceiver *transceiver;
+ 	unsigned softconnect:1;
+ 	unsigned vbus_active:1;
+@@ -514,7 +337,7 @@ struct fsl_udc {
+ #define DBG(fmt, args...) 	printk(KERN_DEBUG "[%s]  " fmt "\n", \
+ 				__FUNCTION__, ## args)
+ #else
+-#define DBG(fmt, args...)	do{}while(0)
++#define DBG(fmt, args...)	do {} while (0)
+ #endif
+ 
+ #if 0
+@@ -548,7 +371,7 @@ static void dump_msg(const char *label, 
+ #ifdef VERBOSE
+ #define VDBG		DBG
+ #else
+-#define VDBG(stuff...)	do{}while(0)
++#define VDBG(stuff...)	do {} while (0)
+ #endif
+ 
+ #define ERR(stuff...)		pr_err("udc: " stuff)
+@@ -573,11 +396,14 @@ static void dump_msg(const char *label, 
+ #define ep_maxpacket(EP)	((EP)->ep.maxpacket)
+ #define ep_is_in(EP)	( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
+ 			USB_DIR_IN ):((EP)->desc->bEndpointAddress \
+-			& USB_DIR_IN)==USB_DIR_IN)
++			& USB_DIR_IN) == USB_DIR_IN)
+ #define get_ep_by_pipe(udc, pipe)	((pipe == 1)? &udc->eps[0]: \
+ 					&udc->eps[pipe])
+ #define get_pipe_by_windex(windex)	((windex & USB_ENDPOINT_NUMBER_MASK) \
+ 					* 2 + ((windex & USB_DIR_IN) ? 1 : 0))
+ #define get_pipe_by_ep(EP)	(ep_index(EP) * 2 + ep_is_in(EP))
+ 
++/* Bulk only class request */
++#define USB_BULK_RESET_REQUEST          0xff
++
+ #endif
+--- a/drivers/usb/gadget/gadget_chips.h
++++ b/drivers/usb/gadget/gadget_chips.h
+@@ -147,6 +147,11 @@
+ #define	gadget_is_m66592(g)	0
+ #endif
+ 
++#ifdef CONFIG_USB_GADGET_MCF5445X
++#define gadget_is_mcf5445x(g)	!strcmp("fsl-usb2-udc", (g)->name)
++#else
++#define gadget_is_mcf5445x(g)	0
++#endif
+ 
+ // CONFIG_USB_GADGET_SX2
+ // CONFIG_USB_GADGET_AU1X00
+@@ -212,5 +217,7 @@ static inline int usb_gadget_controller_
+ 		return 0x20;
+ 	else if (gadget_is_m66592(gadget))
+ 		return 0x21;
++	else if (gadget_is_mcf5445x(gadget))
++		return 0x22;
+ 	return -ENOENT;
+ }
+--- /dev/null
++++ b/drivers/usb/gadget/mcf5445x_udc.c
+@@ -0,0 +1,2758 @@
++/*
++ * Copyright Freescale Semiconductor, Inc. 2006-2007
++ *
++ *      Based on mpc_udc.c code
++ *      of Li Yang and Jiang Bo (Freescale Semiconductor, Inc.)
++ *
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ ***************************************************************************
++ * Changes:
++ *   v0.004	30 July 2007		Duck
++ *   		mcf5445x port
++ *   v0.003	27 October 2006		Andrey Butok
++ *		Added M5329EVB support (without external transceiver).
++ *   v0.002	29 September 2006	Andrey Butok
++ *		Some little changes. Added OTG support.
++ *   v0.001	12 July 2006		Andrey Butok
++ *   		Initial Release - developed on uClinux with 2.6.17.1 kernel.
++ *   		Based on mpc_udc.c code
++ *   		of Li Yang and Jiang Bo (Freescale Semiconductor, Inc.)
++ *
++ */
++
++#define DEBUG
++#undef VERBOSE
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/ioport.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/delay.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/irq.h>
++#include <linux/timer.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/proc_fs.h>
++#include <linux/mm.h>
++#include <linux/platform_device.h>
++#include <linux/moduleparam.h>
++#include <linux/device.h>
++#include <linux/usb/ch9.h>
++#include <linux/usb_gadget.h>
++#include <linux/usb/otg.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/fsl_devices.h>
++#include <linux/usb/fsl_xcvr.h>
++#include <linux/usb/fsl_usb2.h>
++#include <linux/pm.h>
++
++#include <asm/byteorder.h>
++#include <asm/system.h>
++#include <asm/unaligned.h>
++#include <asm/dma.h>
++
++#include <asm/mcfsim.h>
++#include <asm/cacheflush.h>
++
++#include "fsl_usb2_udc.h"
++
++#define	DRIVER_DESC	"Freescale High-Speed USB SoC Device Controller driver"
++#define	DRIVER_AUTHOR	"Freescale Semiconductor Inc."
++#define	DRIVER_VERSION	"30 July 2007"
++
++#define cpu_to_hc32(x)	(x)
++#define hc32_to_cpu(x)	(x)
++
++static int udc_suspend(struct fsl_udc *udc);
++
++#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
++
++static const char driver_name[] = "fsl-usb2-udc";
++static const char driver_desc[] = DRIVER_DESC;
++
++volatile static struct fsl_usb_device_regs *dr_regs;
++volatile static struct usb_sys_interface *usb_sys_regs;
++
++/* it is initialized in probe()  */
++static struct fsl_udc *udc_controller;
++
++static const struct usb_endpoint_descriptor
++fsl_ep0_desc = {
++	.bLength =		USB_DT_ENDPOINT_SIZE,
++	.bDescriptorType =	USB_DT_ENDPOINT,
++	.bEndpointAddress =	0,
++	.bmAttributes =		USB_ENDPOINT_XFER_CONTROL,
++	.wMaxPacketSize =	USB_MAX_CTRL_PAYLOAD,
++};
++
++static int fsl_udc_suspend(struct device *dev, pm_message_t state);
++static int fsl_udc_resume(struct device *dev);
++static void fsl_ep_fifo_flush(struct usb_ep *_ep);
++
++/********************************************************************
++ *	Internal Used Function
++********************************************************************/
++/*-----------------------------------------------------------------
++ * done() - retire a request; caller blocked irqs
++ * @status : request status to be set, only works when
++ *	request is still in progress.
++ *--------------------------------------------------------------*/
++static void done(struct fsl_ep *ep, struct fsl_req *req, int status)
++{
++	struct fsl_udc *udc = NULL;
++	unsigned char stopped = ep->stopped;
++
++	udc = (struct fsl_udc *)ep->udc;
++
++	pr_debug("udc: req=0x%p\n", req);
++	if (req->head) {
++		pr_debug("udc: freeing head=0x%p\n", req->head);
++		dma_pool_free(udc->td_pool, req->head, req->head->td_dma);
++	}
++
++	/* the req->queue pointer is used by ep_queue() func, in which
++	 * the request will be added into a udc_ep->queue 'd tail
++	 * so here the req will be dropped from the ep->queue
++	 */
++	list_del_init(&req->queue);
++
++	/* req.status should be set as -EINPROGRESS in ep_queue() */
++	if (req->req.status == -EINPROGRESS)
++		req->req.status = status;
++	else
++		status = req->req.status;
++
++	pr_debug("udc: req=0x%p  mapped=%x\n", req, req->mapped);
++
++	if (req->mapped) {
++		pr_debug("udc: calling dma_unmap_single(buf,%s)  req=0x%p  "
++			 "a=0x%x  len=%d\n",
++			 ep_is_in(ep) ? "to_dvc" : "from_dvc",
++			 req, req->req.dma, req->req.length);
++
++		dma_unmap_single(ep->udc->gadget.dev.parent,
++				 req->req.dma, req->req.length, ep_is_in(ep) ?
++				 DMA_TO_DEVICE : DMA_FROM_DEVICE);
++
++		req->req.dma = DMA_ADDR_INVALID;
++		req->mapped = 0;
++		pr_debug("udc: req=0x%p set req.dma=0x%x\n", req, req->req.dma);
++	} else {
++		if ((req->req.length != 0)
++		    && (req->req.dma != DMA_ADDR_INVALID)) {
++			pr_debug("udc: calling dma_sync_single_for_cpu(buf,%s) "
++				 "req=0x%p  dma=0x%x  len=%d\n",
++				 ep_is_in(ep) ? "to_dvc" : "from_dvc", req,
++				 req->req.dma, req->req.length);
++
++			dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
++						req->req.dma, req->req.length,
++						ep_is_in(ep) ? DMA_TO_DEVICE :
++						DMA_FROM_DEVICE);
++		}
++	}
++
++	if (status && (status != -ESHUTDOWN)) {
++		pr_debug("udc: complete %s req 0c%p stat %d len %u/%u\n",
++			 ep->ep.name, &req->req, status,
++			 req->req.actual, req->req.length);
++	}
++
++	/* don't modify queue heads during completion callback */
++	ep->stopped = 1;
++
++	spin_unlock(&ep->udc->lock);
++
++	/* this complete() should a func implemented by gadget layer,
++	 * eg fsg->bulk_in_complete() */
++	if (req->req.complete) {
++		pr_debug("udc: calling gadget's complete()  req=0x%p\n", req);
++		req->req.complete(&ep->ep, &req->req);
++		pr_debug("udc: back from gadget's complete()\n");
++	}
++
++	spin_lock(&ep->udc->lock);
++	ep->stopped = stopped;
++}
++
++/*
++ * nuke(): delete all requests related to this ep
++ * called with spinlock held
++ *--------------------------------------------------------------*/
++static void nuke(struct fsl_ep *ep, int status)
++{
++	ep->stopped = 1;
++
++	/* Flush fifo */
++	fsl_ep_fifo_flush(&ep->ep);
++
++	/* Whether this eq has request linked */
++	while (!list_empty(&ep->queue)) {
++		struct fsl_req *req = NULL;
++
++		req = list_entry(ep->queue.next, struct fsl_req, queue);
++		done(ep, req, status);
++	}
++}
++
++/*------------------------------------------------------------------
++	Internal Hardware related function
++ ------------------------------------------------------------------*/
++
++static int dr_controller_setup(struct fsl_udc *udc)
++{
++	unsigned int tmp;
++	unsigned int __attribute((unused)) ctrl = 0;
++	unsigned long timeout;
++	struct fsl_usb2_platform_data *pdata;
++
++#define FSL_UDC_RESET_TIMEOUT 1000
++
++	/* before here, make sure dr_regs has been initialized */
++	if (!udc)
++		return -EINVAL;
++	pdata = udc->pdata;
++
++	/* Stop and reset the usb controller */
++	tmp = fsl_readl(&dr_regs->usbcmd);
++	tmp &= ~USB_CMD_RUN_STOP;
++	fsl_writel(tmp, &dr_regs->usbcmd);
++
++	tmp = fsl_readl(&dr_regs->usbcmd);
++	tmp |= USB_CMD_CTRL_RESET;
++	fsl_writel(tmp, &dr_regs->usbcmd);
++
++	/* Wait for reset to complete */
++	timeout = jiffies + FSL_UDC_RESET_TIMEOUT;
++	while (fsl_readl(&dr_regs->usbcmd) & USB_CMD_CTRL_RESET) {
++		if (time_after(jiffies, timeout)) {
++			ERR("udc reset timeout! \n");
++			return -ETIMEDOUT;
++		}
++		cpu_relax();
++	}
++
++	tmp = fsl_readl(&dr_regs->usbmode);
++	tmp &= ~0x3;	/* clear mode bits */
++	tmp |= USB_MODE_CTRL_MODE_DEVICE;
++	/* Disable Setup Lockout */
++	tmp |= USB_MODE_SETUP_LOCK_OFF;
++	if (pdata->es)
++		tmp |= USBMODE_ES;
++	fsl_writel(tmp, &dr_regs->usbmode);
++
++	if (pdata->xcvr_ops && pdata->xcvr_ops->set_device)
++		pdata->xcvr_ops->set_device();
++
++	/* Clear the setup status */
++	fsl_writel(0, &dr_regs->usbsts);
++
++	tmp = udc->ep_qh_dma;
++	tmp &= USB_EP_LIST_ADDRESS_MASK;
++	fsl_writel(tmp, &dr_regs->endpointlistaddr);
++
++	/*
++	VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x",
++		(int)udc->ep_qh, (int)tmp,
++		fsl_readl(&dr_regs->endpointlistaddr));
++	*/
++
++
++	if (pdata->have_sysif_regs) {
++		/* Config control enable i/o output, cpu endian register */
++		ctrl = __raw_readl(&usb_sys_regs->control);
++		ctrl |= USB_CTRL_IOENB;
++		__raw_writel(ctrl, &usb_sys_regs->control);
++	}
++
++#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
++	/* Turn on cache snooping hardware, since some PowerPC platforms
++	 * wholly rely on hardware to deal with cache coherent. */
++
++	if (pdata->have_sysif_regs) {
++		/* Setup Snooping for all the 4GB space */
++		tmp = SNOOP_SIZE_2GB;	/* starts from 0x0, size 2G */
++		__raw_writel(tmp, &usb_sys_regs->snoop1);
++		tmp |= 0x80000000;	/* starts from 0x8000000, size 2G */
++		__raw_writel(tmp, &usb_sys_regs->snoop2);
++	}
++#endif
++
++	return 0;
++}
++
++static void pullup_enable(struct fsl_udc *udc)
++{
++	u32 temp;
++
++	unsigned short ccm = fsl_readw(&MCF_CCM_UOCSR);
++	ccm |= MCF_CCM_UOCSR_BVLD;
++	ccm &= ~MCF_CCM_UOCSR_SEND;
++	fsl_writew(ccm, &MCF_CCM_UOCSR);
++
++	/* Enable DR irq reg */
++	temp = USB_INTR_INT_EN | USB_INTR_ERR_INT_EN
++		| USB_INTR_PTC_DETECT_EN | USB_INTR_RESET_EN
++		| USB_INTR_DEVICE_SUSPEND | USB_INTR_SYS_ERR_EN;
++
++	fsl_writel(temp, &dr_regs->usbintr);
++
++	/* Set controller to Run */
++	temp = fsl_readl(&dr_regs->usbcmd);
++	temp |= USB_CMD_RUN_STOP;
++	fsl_writel(temp, &dr_regs->usbcmd);
++
++#ifdef NEVER /* DDD FIXME: we want this? */
++	if (!udc->transceiver)
++		*((u16 *)(MCF_FBCS1_CSAR)) &= ~0x1; /* Enable pullup register */
++#endif
++}
++
++static void pullup_disable(struct fsl_udc *udc)
++{
++	unsigned int tmp;
++	unsigned short ccm;
++
++	VDBG();
++	/* disable all INTRs */
++	fsl_writel(0, &dr_regs->usbintr);
++
++	ccm = fsl_readw(&MCF_CCM_UOCSR);
++	ccm &= ~MCF_CCM_UOCSR_BVLD;
++	fsl_writew(ccm, &MCF_CCM_UOCSR);
++
++	/* set controller to Stop */
++	tmp = fsl_readl(&dr_regs->usbcmd);
++	tmp &= ~USB_CMD_RUN_STOP;
++	fsl_writel(tmp, &dr_regs->usbcmd);
++
++#ifdef NEVER /* DDD FIXME: we want this? */
++	if (!udc->transceiver)
++		*((u16 *)(MCF_FBCS1_CSAR)) |= 0x1; /* Disable pullup register */
++#endif
++
++}
++
++static void dr_controller_run(struct fsl_udc *udc)
++{
++	VDBG();
++	pullup_enable(udc);
++	udc->stopped = 0;
++}
++
++static void dr_controller_stop(struct fsl_udc *udc)
++{
++	pullup_disable(udc);
++	udc->stopped = 1;
++	udc->gadget.b_hnp_enable = 0;
++	udc->gadget.a_hnp_support = 0;
++	udc->gadget.a_alt_hnp_support = 0;
++}
++
++void dr_ep_setup(unsigned char ep_num, unsigned char dir, unsigned char ep_type)
++{
++	unsigned int tmp_epctrl = 0;
++
++	tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
++	if (dir) {
++		if (ep_num)
++			tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST;
++		tmp_epctrl |= EPCTRL_TX_ENABLE;
++		tmp_epctrl |= ((unsigned int)(ep_type)
++				<< EPCTRL_TX_EP_TYPE_SHIFT);
++	} else {
++		if (ep_num)
++			tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST;
++		tmp_epctrl |= EPCTRL_RX_ENABLE;
++		tmp_epctrl |= ((unsigned int)(ep_type)
++				<< EPCTRL_RX_EP_TYPE_SHIFT);
++	}
++
++	fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]);
++}
++
++static void dr_ep_change_stall(unsigned char ep_num, unsigned char dir,
++			       int value)
++{
++	u32 tmp_epctrl = 0;
++
++	tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
++
++	if (value) {
++		/* set the stall bit */
++		if (dir)
++			tmp_epctrl |= EPCTRL_TX_EP_STALL;
++		else
++			tmp_epctrl |= EPCTRL_RX_EP_STALL;
++	} else {
++		/* clear the stall bit and reset data toggle */
++		if (dir) {
++			tmp_epctrl &= ~EPCTRL_TX_EP_STALL;
++			tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST;
++		} else {
++			tmp_epctrl &= ~EPCTRL_RX_EP_STALL;
++			tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST;
++		}
++	}
++	fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]);
++}
++
++/* Get stall status of a specific ep
++   Return: 0: not stalled; 1:stalled */
++static int dr_ep_get_stall(unsigned char ep_num, unsigned char dir)
++{
++	u32 epctrl;
++
++	epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
++	if (dir)
++		return (epctrl & EPCTRL_TX_EP_STALL) ? 1 : 0;
++	else
++		return (epctrl & EPCTRL_RX_EP_STALL) ? 1 : 0;
++}
++
++/********************************************************************
++	Internal Structure Build up functions
++********************************************************************/
++
++/*------------------------------------------------------------------
++* struct_ep_qh_setup(): set the Endpoint Capabilites field of QH
++ * @zlt: Zero Length Termination Select (1: disable; 0: enable)
++ * @mult: Mult field
++ ------------------------------------------------------------------*/
++static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num,
++		unsigned char dir, unsigned char ep_type,
++		unsigned int max_pkt_len,
++		unsigned int zlt, unsigned char mult)
++{
++	struct ep_queue_head *p_QH = &udc->ep_qh[2 * ep_num + dir];
++	unsigned int tmp = 0;
++
++	/* set the Endpoint Capabilites in QH */
++	switch (ep_type) {
++	case USB_ENDPOINT_XFER_CONTROL:
++		/* Interrupt On Setup (IOS). for control ep  */
++		tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
++			| EP_QUEUE_HEAD_IOS;
++		break;
++	case USB_ENDPOINT_XFER_ISOC:
++		tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
++			| (mult << EP_QUEUE_HEAD_MULT_POS);
++		break;
++	case USB_ENDPOINT_XFER_BULK:
++	case USB_ENDPOINT_XFER_INT:
++		tmp = max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS;
++		break;
++	default:
++		VDBG("error ep type is %d", ep_type);
++		return;
++	}
++	if (zlt)
++		tmp |= EP_QUEUE_HEAD_ZLT_SEL;
++	p_QH->max_pkt_length = cpu_to_hc32(tmp);
++
++	return;
++}
++
++/* Setup qh structure and ep register for ep0. */
++static void ep0_setup(struct fsl_udc *udc)
++{
++	/* the intialization of an ep includes: fields in QH, Regs,
++	 * fsl_ep struct */
++	struct_ep_qh_setup(udc, 0, USB_RECV, USB_ENDPOINT_XFER_CONTROL,
++			USB_MAX_CTRL_PAYLOAD, 0, 0);
++	struct_ep_qh_setup(udc, 0, USB_SEND, USB_ENDPOINT_XFER_CONTROL,
++			USB_MAX_CTRL_PAYLOAD, 0, 0);
++	dr_ep_setup(0, USB_RECV, USB_ENDPOINT_XFER_CONTROL);
++	dr_ep_setup(0, USB_SEND, USB_ENDPOINT_XFER_CONTROL);
++
++	return;
++
++}
++
++/***********************************************************************
++		Endpoint Management Functions
++***********************************************************************/
++
++/*-------------------------------------------------------------------------
++ * when configurations are set, or when interface settings change
++ * for example the do_set_interface() in gadget layer,
++ * the driver will enable or disable the relevant endpoints
++ * ep0 doesn't use this routine. It is always enabled.
++-------------------------------------------------------------------------*/
++static int fsl_ep_enable(struct usb_ep *_ep,
++		const struct usb_endpoint_descriptor *desc)
++{
++	struct fsl_udc *udc = NULL;
++	struct fsl_ep *ep = NULL;
++	unsigned short max = 0;
++	unsigned char mult = 0, zlt;
++	int retval = -EINVAL;
++	unsigned long flags = 0;
++
++	ep = container_of(_ep, struct fsl_ep, ep);
++
++	/* catch various bogus parameters */
++	if (!_ep || !desc || ep->desc
++			|| (desc->bDescriptorType != USB_DT_ENDPOINT))
++		return -EINVAL;
++
++	udc = ep->udc;
++
++	if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN))
++		return -ESHUTDOWN;
++
++	max = le16_to_cpu(desc->wMaxPacketSize);
++
++	/* Disable automatic zlp generation.  Driver is reponsible to indicate
++	 * explicitly through req->req.zero.  This is needed to enable multi-td
++	 * request. */
++	zlt = 1;
++
++	/* Assume the max packet size from gadget is always correct */
++	switch (desc->bmAttributes & 0x03) {
++	case USB_ENDPOINT_XFER_CONTROL:
++	case USB_ENDPOINT_XFER_BULK:
++	case USB_ENDPOINT_XFER_INT:
++		/* mult = 0.  Execute N Transactions as demonstrated by
++		 * the USB variable length packet protocol where N is
++		 * computed using the Maximum Packet Length (dQH) and
++		 * the Total Bytes field (dTD) */
++		mult = 0;
++		break;
++	case USB_ENDPOINT_XFER_ISOC:
++		/* Calculate transactions needed for high bandwidth iso */
++		mult = (unsigned char)(1 + ((max >> 11) & 0x03));
++		max = max & 0x8ff;	/* bit 0~10 */
++		/* 3 transactions at most */
++		if (mult > 3)
++			goto en_done;
++		break;
++	default:
++		goto en_done;
++	}
++
++	spin_lock_irqsave(&udc->lock, flags);
++	ep->ep.maxpacket = max;
++	ep->desc = desc;
++	ep->stopped = 0;
++
++	/* Controller related setup */
++	/* Init EPx Queue Head (Ep Capabilites field in QH
++	 * according to max, zlt, mult) */
++	struct_ep_qh_setup(udc, (unsigned char) ep_index(ep),
++			(unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
++					?  USB_SEND : USB_RECV),
++			(unsigned char) (desc->bmAttributes
++					& USB_ENDPOINT_XFERTYPE_MASK),
++			max, zlt, mult);
++
++	/* Init endpoint ctrl register */
++	dr_ep_setup((unsigned char) ep_index(ep),
++			(unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
++					? USB_SEND : USB_RECV),
++			(unsigned char) (desc->bmAttributes
++					& USB_ENDPOINT_XFERTYPE_MASK));
++
++	spin_unlock_irqrestore(&udc->lock, flags);
++	retval = 0;
++
++	VDBG("enabled %s (ep%d%s) maxpacket %d", ep->ep.name,
++			ep->desc->bEndpointAddress & 0x0f,
++			(desc->bEndpointAddress & USB_DIR_IN)
++				? "in" : "out", max);
++en_done:
++	return retval;
++}
++
++/*---------------------------------------------------------------------
++ * @ep : the ep being unconfigured. May not be ep0
++ * Any pending and uncomplete req will complete with status (-ESHUTDOWN)
++*---------------------------------------------------------------------*/
++static int fsl_ep_disable(struct usb_ep *_ep)
++{
++	struct fsl_udc *udc = NULL;
++	struct fsl_ep *ep = NULL;
++	unsigned long flags = 0;
++	u32 epctrl;
++	int ep_num;
++
++	ep = container_of(_ep, struct fsl_ep, ep);
++	if (!_ep || !ep->desc) {
++		pr_debug("udc: %s not enabled\n", _ep ? ep->ep.name : NULL);
++		return -EINVAL;
++	}
++
++	/* disable ep on controller */
++	ep_num = ep_index(ep);
++	epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
++	if (ep_is_in(ep))
++		epctrl &= ~EPCTRL_TX_ENABLE;
++	else
++		epctrl &= ~EPCTRL_RX_ENABLE;
++	fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
++
++	udc = (struct fsl_udc *)ep->udc;
++	spin_lock_irqsave(&udc->lock, flags);
++
++	/* nuke all pending requests (does flush) */
++	nuke(ep, -ESHUTDOWN);
++
++	ep->desc = 0;
++	ep->stopped = 1;
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	pr_debug("udc: disabled %s OK\n", _ep->name);
++	return 0;
++}
++
++/*---------------------------------------------------------------------
++ * allocate a request object used by this endpoint
++ * the main operation is to insert the req->queue to the eq->queue
++ * Returns the request, or null if one could not be allocated
++*---------------------------------------------------------------------*/
++static struct usb_request *
++fsl_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
++{
++	struct fsl_req *req = NULL;
++
++	req = kzalloc(sizeof *req, gfp_flags);
++	if (!req)
++		return NULL;
++
++	req->req.dma = DMA_ADDR_INVALID;
++	pr_debug("udc: req=0x%p   set req.dma=0x%x\n", req, req->req.dma);
++	INIT_LIST_HEAD(&req->queue);
++
++	return &req->req;
++}
++
++static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req)
++{
++	struct fsl_req *req;
++
++	req = container_of(_req, struct fsl_req, req);
++	pr_debug("udc: req=0x%p\n", req);
++
++	if (_req)
++		kfree(req);
++}
++
++/*-------------------------------------------------------------------------*/
++static int fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
++{
++	int i = ep_index(ep) * 2 + ep_is_in(ep);
++	u32 temp, bitmask, tmp_stat;
++	struct ep_queue_head *dQH = &ep->udc->ep_qh[i];
++
++	pr_debug("udc: queue req=0x%p to ep index %d\n", req, i);
++
++	bitmask = ep_is_in(ep)
++		? (1 << (ep_index(ep) + 16))
++		: (1 << (ep_index(ep)));
++
++	/* check if the pipe is empty */
++	if (!(list_empty(&ep->queue))) {
++		/* Add td to the end */
++		struct fsl_req *lastreq;
++		lastreq = list_entry(ep->queue.prev, struct fsl_req, queue);
++		lastreq->tail->next_td_ptr =
++			cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK);
++		/* Read prime bit, if 1 goto done */
++		if (fsl_readl(&dr_regs->endpointprime) & bitmask)
++			goto out;
++
++		do {
++			/* Set ATDTW bit in USBCMD */
++			temp = fsl_readl(&dr_regs->usbcmd);
++			fsl_writel(temp | USB_CMD_ATDTW, &dr_regs->usbcmd);
++
++			/* Read correct status bit */
++			tmp_stat = fsl_readl(&dr_regs->endptstatus) & bitmask;
++
++		} while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_ATDTW));
++
++		/* Write ATDTW bit to 0 */
++		temp = fsl_readl(&dr_regs->usbcmd);
++		fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd);
++
++		if (tmp_stat)
++			goto out;
++	}
++
++	/* Write dQH next pointer and terminate bit to 0 */
++	temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
++	dQH->next_dtd_ptr = cpu_to_hc32(temp);
++
++	/* Clear active and halt bit */
++	temp = cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
++			| EP_QUEUE_HEAD_STATUS_HALT));
++	dQH->size_ioc_int_sts &= temp;
++
++	/* Prime endpoint by writing 1 to ENDPTPRIME */
++	temp = ep_is_in(ep)
++		? (1 << (ep_index(ep) + 16))
++		: (1 << (ep_index(ep)));
++	fsl_writel(temp, &dr_regs->endpointprime);
++out:
++	return 0;
++}
++
++/* Fill in the dTD structure
++ * @req: request that the transfer belongs to
++ * @length: return actually data length of the dTD
++ * @dma: return dma address of the dTD
++ * @is_last: return flag if it is the last dTD of the request
++ * return: pointer to the built dTD */
++static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
++		dma_addr_t *dma, int *is_last)
++{
++	u32 swap_temp;
++	struct ep_td_struct *dtd;
++
++	/* how big will this transfer be? */
++	*length = min(req->req.length - req->req.actual,
++			(unsigned)EP_MAX_LENGTH_TRANSFER);
++
++	dtd = dma_pool_alloc(udc_controller->td_pool, GFP_KERNEL, dma);
++	if (dtd == NULL)
++		return dtd;
++
++	dtd->td_dma = *dma;
++	/* Clear reserved field */
++	swap_temp = hc32_to_cpu(dtd->size_ioc_sts);
++	swap_temp &= ~DTD_RESERVED_FIELDS;
++	dtd->size_ioc_sts = cpu_to_hc32(swap_temp);
++
++	/* Init all of buffer page pointers */
++	swap_temp = (u32) (req->req.dma + req->req.actual);
++	dtd->buff_ptr0 = cpu_to_hc32(swap_temp);
++	dtd->buff_ptr1 = cpu_to_hc32(swap_temp + 0x1000);
++	dtd->buff_ptr2 = cpu_to_hc32(swap_temp + 0x2000);
++	dtd->buff_ptr3 = cpu_to_hc32(swap_temp + 0x3000);
++	dtd->buff_ptr4 = cpu_to_hc32(swap_temp + 0x4000);
++
++	req->req.actual += *length;
++
++	/* zlp is needed if req->req.zero is set */
++	if (req->req.zero) {
++		if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
++			*is_last = 1;
++		else
++			*is_last = 0;
++	} else if (req->req.length == req->req.actual)
++		*is_last = 1;
++	else
++		*is_last = 0;
++
++	if ((*is_last) == 0)
++		VDBG("multi-dtd request!\n");
++	/* Fill in the transfer size; set active bit */
++	swap_temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE);
++
++	/* Enable interrupt for the last dtd of a request */
++	if (*is_last && !req->req.no_interrupt)
++		swap_temp |= DTD_IOC;
++
++	dtd->size_ioc_sts = cpu_to_hc32(swap_temp);
++
++	mb();
++
++	VDBG("length = %d address= 0x%x", *length, (int)*dma);
++
++	return dtd;
++}
++
++/* Generate dtd chain for a request */
++static int fsl_req_to_dtd(struct fsl_req *req)
++{
++	unsigned	count;
++	int		is_last;
++	int		is_first = 1;
++	struct ep_td_struct	*last_dtd = NULL, *dtd;
++	dma_addr_t dma;
++
++	do {
++		dtd = fsl_build_dtd(req, &count, &dma, &is_last);
++		if (dtd == NULL)
++			return -ENOMEM;
++
++		if (is_first) {
++			is_first = 0;
++			req->head = dtd;
++		} else {
++			last_dtd->next_td_ptr = hc32_to_cpu(dma);
++			last_dtd->next_td_virt = dtd;
++		}
++		last_dtd = dtd;
++
++		req->dtd_count++;
++	} while (!is_last);
++
++	dtd->next_td_ptr = cpu_to_hc32(DTD_NEXT_TERMINATE);
++
++	req->tail = dtd;
++
++	return 0;
++}
++
++/* queues (submits) an I/O request to an endpoint */
++static int
++fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
++{
++	struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep);
++	struct fsl_req *req = container_of(_req, struct fsl_req, req);
++	struct fsl_udc *udc;
++	unsigned long flags;
++	int is_iso = 0;
++
++	/* catch various bogus parameters */
++	if (!_req || !req->req.complete || !req->req.buf
++			|| !list_empty(&req->queue)) {
++		VDBG("%s, bad params\n", __FUNCTION__);
++		return -EINVAL;
++	}
++	if (!_ep || (!ep->desc && ep_index(ep))) {
++		VDBG("%s, bad ep\n", __FUNCTION__);
++		return -EINVAL;
++	}
++	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
++		if (req->req.length > ep->ep.maxpacket)
++			return -EMSGSIZE;
++		is_iso = 1;
++	}
++
++	udc = ep->udc;
++	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
++		return -ESHUTDOWN;
++
++	req->ep = ep;
++
++	/* map virtual address to hardware */
++	if (req->req.dma == DMA_ADDR_INVALID) {
++		req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
++					req->req.buf,
++					req->req.length, ep_is_in(ep)
++						? DMA_TO_DEVICE
++						: DMA_FROM_DEVICE);
++		req->mapped = 1;
++	} else {
++		dma_sync_single_for_device(ep->udc->gadget.dev.parent,
++					req->req.dma, req->req.length,
++					ep_is_in(ep)
++						? DMA_TO_DEVICE
++						: DMA_FROM_DEVICE);
++		req->mapped = 0;
++	}
++
++	req->req.status = -EINPROGRESS;
++	req->req.actual = 0;
++	req->dtd_count = 0;
++
++	spin_lock_irqsave(&udc->lock, flags);
++
++	/* build dtds and push them to device queue */
++	if (!fsl_req_to_dtd(req)) {
++		fsl_queue_td(ep, req);
++	} else {
++		spin_unlock_irqrestore(&udc->lock, flags);
++		return -ENOMEM;
++	}
++
++	/* Update ep0 state */
++	if ((ep_index(ep) == 0))
++		udc->ep0_state = DATA_STATE_XMIT;
++
++	/* irq handler advances the queue */
++	if (req != NULL)
++		list_add_tail(&req->queue, &ep->queue);
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	return 0;
++}
++
++/* dequeues (cancels, unlinks) an I/O request from an endpoint */
++static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
++{
++	struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep);
++	struct fsl_req *req;
++	unsigned long flags;
++	int ep_num, stopped, ret = 0;
++	u32 epctrl;
++
++	if (!_ep || !_req)
++		return -EINVAL;
++
++	spin_lock_irqsave(&ep->udc->lock, flags);
++	stopped = ep->stopped;
++
++	/* Stop the ep before we deal with the queue */
++	ep->stopped = 1;
++	ep_num = ep_index(ep);
++	epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
++	if (ep_is_in(ep))
++		epctrl &= ~EPCTRL_TX_ENABLE;
++	else
++		epctrl &= ~EPCTRL_RX_ENABLE;
++	fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
++
++	/* make sure it's actually queued on this endpoint */
++	list_for_each_entry(req, &ep->queue, queue) {
++		if (&req->req == _req)
++			break;
++	}
++	if (&req->req != _req) {
++		ret = -EINVAL;
++		goto out;
++	}
++
++	/* The request is in progress, or completed but not dequeued */
++	if (ep->queue.next == &req->queue) {
++		_req->status = -ECONNRESET;
++		fsl_ep_fifo_flush(_ep);	/* flush current transfer */
++
++		/* The request isn't the last request in this ep queue */
++		if (req->queue.next != &ep->queue) {
++			struct ep_queue_head *qh;
++			struct fsl_req *next_req;
++
++			qh = ep->qh;
++			next_req = list_entry(req->queue.next, struct fsl_req,
++					queue);
++
++			/* Point the QH to the first TD of next request */
++			fsl_writel((u32) next_req->head, &qh->curr_dtd_ptr);
++		}
++
++		/* The request hasn't been processed, patch up the TD chain */
++	} else {
++		struct fsl_req *prev_req;
++
++		prev_req = list_entry(req->queue.prev, struct fsl_req, queue);
++		fsl_writel(fsl_readl(&req->tail->next_td_ptr),
++				&prev_req->tail->next_td_ptr);
++
++	}
++
++	done(ep, req, -ECONNRESET);
++
++	/* Enable EP */
++out:	epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
++	if (ep_is_in(ep))
++		epctrl |= EPCTRL_TX_ENABLE;
++	else
++		epctrl |= EPCTRL_RX_ENABLE;
++	fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
++	ep->stopped = stopped;
++
++	spin_unlock_irqrestore(&ep->udc->lock, flags);
++	return ret;
++}
++
++/*-------------------------------------------------------------------------*/
++
++/*-----------------------------------------------------------------
++ * modify the endpoint halt feature
++ * @ep: the non-isochronous endpoint being stalled
++ * @value: 1--set halt  0--clear halt
++ * Returns zero, or a negative error code.
++*----------------------------------------------------------------*/
++static int fsl_ep_set_halt(struct usb_ep *_ep, int value)
++{
++	struct fsl_ep *ep = NULL;
++	unsigned long flags = 0;
++	int status = -EOPNOTSUPP;	/* operation not supported */
++	unsigned char ep_dir = 0, ep_num = 0;
++	struct fsl_udc *udc = NULL;
++
++	ep = container_of(_ep, struct fsl_ep, ep);
++	udc = ep->udc;
++	if (!_ep || !ep->desc) {
++		status = -EINVAL;
++		goto out;
++	}
++
++	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
++		status = -EOPNOTSUPP;
++		goto out;
++	}
++
++	/* Attempt to halt IN ep will fail if any transfer requests
++	 * are still queue */
++	if (value && ep_is_in(ep) && !list_empty(&ep->queue)) {
++		status = -EAGAIN;
++		goto out;
++	}
++
++	status = 0;
++	ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV;
++	ep_num = (unsigned char)(ep_index(ep));
++	spin_lock_irqsave(&ep->udc->lock, flags);
++	dr_ep_change_stall(ep_num, ep_dir, value);
++	spin_unlock_irqrestore(&ep->udc->lock, flags);
++
++	if (ep_index(ep) == 0) {
++		udc->ep0_state = WAIT_FOR_SETUP;
++		udc->ep0_dir = 0;
++	}
++out:
++	VDBG(" %s %s halt stat %d", ep->ep.name,
++			value ?  "set" : "clear", status);
++
++	return status;
++}
++
++static void fsl_ep_fifo_flush(struct usb_ep *_ep)
++{
++	struct fsl_ep *ep;
++	int ep_num, ep_dir;
++	u32 bits;
++	unsigned long timeout;
++#define FSL_UDC_FLUSH_TIMEOUT 1000
++
++	if (!_ep) {
++		return;
++	} else {
++		ep = container_of(_ep, struct fsl_ep, ep);
++		if (!ep->desc)
++			return;
++	}
++	ep_num = ep_index(ep);
++	ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV;
++
++	if (ep_num == 0)
++		bits = (1 << 16) | 1;
++	else if (ep_dir == USB_SEND)
++		bits = 1 << (16 + ep_num);
++	else
++		bits = 1 << ep_num;
++
++	timeout = jiffies + FSL_UDC_FLUSH_TIMEOUT;
++	do {
++		fsl_writel(bits, &dr_regs->endptflush);
++
++		/* Wait until flush complete */
++		while (fsl_readl(&dr_regs->endptflush)) {
++			if (time_after(jiffies, timeout)) {
++				ERR("ep flush timeout\n");
++				return;
++			}
++			cpu_relax();
++		}
++		/* See if we need to flush again */
++	} while (fsl_readl(&dr_regs->endptstatus) & bits);
++}
++
++static struct usb_ep_ops fsl_ep_ops = {
++	.enable = fsl_ep_enable,
++	.disable = fsl_ep_disable,
++
++	.alloc_request = fsl_alloc_request,
++	.free_request = fsl_free_request,
++
++	.queue = fsl_ep_queue,
++	.dequeue = fsl_ep_dequeue,
++
++	.set_halt = fsl_ep_set_halt,
++	.fifo_flush = fsl_ep_fifo_flush,	/* flush fifo */
++};
++
++/*-------------------------------------------------------------------------
++		Gadget Driver Layer Operations
++-------------------------------------------------------------------------*/
++
++/*----------------------------------------------------------------------
++ * Get the current frame number (from DR frame_index Reg )
++ *----------------------------------------------------------------------*/
++static int fsl_get_frame(struct usb_gadget *gadget)
++{
++	return (int)(fsl_readl(&dr_regs->frindex) & USB_FRINDEX_MASKS);
++}
++
++/*-----------------------------------------------------------------------
++ * Tries to wake up the host connected to this gadget
++ -----------------------------------------------------------------------*/
++static int fsl_wakeup(struct usb_gadget *gadget)
++{
++	struct fsl_udc *udc = container_of(gadget, struct fsl_udc, gadget);
++	u32 portsc;
++
++	/* Remote wakeup feature not enabled by host */
++	if (!udc->remote_wakeup)
++		return -ENOTSUPP;
++
++	portsc = fsl_readl(&dr_regs->portsc1);
++	/* not suspended? */
++	if (!(portsc & PORTSCX_PORT_SUSPEND))
++		return 0;
++	/* trigger force resume */
++	portsc |= PORTSCX_PORT_FORCE_RESUME;
++	fsl_writel(portsc, &dr_regs->portsc1);
++	return 0;
++}
++
++static int can_pullup(struct fsl_udc *udc)
++{
++	return udc->driver && udc->softconnect && udc->vbus_active;
++}
++
++/*
++ * Notify controller that VBUS is powered, Called by whatever
++ * detects VBUS sessions
++ * @param gadger    gadger pointer
++ * @param is_active is active?
++ * @return Returns zero on success , or a negative error code
++ */
++static int fsl_vbus_session(struct usb_gadget *gadget, int is_active)
++{
++	struct fsl_udc	*udc;
++	unsigned long	flags;
++
++	udc = container_of(gadget, struct fsl_udc, gadget);
++	spin_lock_irqsave(&udc->lock, flags);
++
++	pr_debug("udc: VBUS %s\n", is_active ? "on" : "off");
++	udc->vbus_active = (is_active != 0);
++
++	if (can_pullup(udc)) {
++		pullup_enable(udc);
++		udc_controller->usb_state = USB_STATE_ATTACHED;
++	} else {
++		pullup_disable(udc);
++		udc_controller->usb_state = USB_STATE_NOTATTACHED;
++	}
++	udc_controller->ep0_state = WAIT_FOR_SETUP;
++	udc_controller->ep0_dir = 0;
++
++	spin_unlock_irqrestore(&udc->lock, flags);
++	return 0;
++}
++
++/* constrain controller's VBUS power usage
++ * This call is used by gadget drivers during SET_CONFIGURATION calls,
++ * reporting how much power the device may consume.  For example, this
++ * could affect how quickly batteries are recharged.
++ *
++ * Returns zero on success, else negative errno.
++ */
++static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA)
++{
++#ifdef CONFIG_USB_OTG
++	struct fsl_udc *udc;
++
++	udc = container_of(gadget, struct fsl_udc, gadget);
++
++	if (udc->transceiver)
++		return otg_set_power(udc->transceiver, mA);
++#endif
++	return -ENOTSUPP;
++}
++
++/*
++ * Change Data+ pullup status
++ * this func is used by usb_gadget_connect/disconnet
++ */
++static int fsl_pullup(struct usb_gadget *gadget, int is_on)
++{
++	struct fsl_udc *udc;
++
++	udc = container_of(gadget, struct fsl_udc, gadget);
++	udc->softconnect = (is_on != 0);
++	if (can_pullup(udc))
++		fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
++				&dr_regs->usbcmd);
++	else
++		fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP),
++				&dr_regs->usbcmd);
++
++	return 0;
++}
++
++/* defined in usb_gadget.h */
++static struct usb_gadget_ops fsl_gadget_ops = {
++	.get_frame = fsl_get_frame,
++	.wakeup = fsl_wakeup,
++	.vbus_session = fsl_vbus_session,
++	.vbus_draw = fsl_vbus_draw,
++	.pullup = fsl_pullup,
++};
++
++/* Set protocol stall on ep0, protocol stall will automatically be cleared
++   on new transaction */
++static void ep0stall(struct fsl_udc *udc)
++{
++	u32 tmp;
++
++	/* must set tx and rx to stall at the same time */
++	tmp = fsl_readl(&dr_regs->endptctrl[0]);
++	tmp |= EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL;
++	fsl_writel(tmp, &dr_regs->endptctrl[0]);
++	udc->ep0_state = WAIT_FOR_SETUP;
++	udc->ep0_dir = 0;
++}
++
++/* Prime a status phase for ep0 */
++static int ep0_prime_status(struct fsl_udc *udc, int direction)
++{
++	struct fsl_req *req = udc->status_req;
++	struct fsl_ep *ep;
++	int status = 0;
++
++	if (direction == EP_DIR_IN)
++		udc->ep0_dir = USB_DIR_IN;
++	else
++		udc->ep0_dir = USB_DIR_OUT;
++
++	ep = &udc->eps[0];
++	udc->ep0_state = WAIT_FOR_OUT_STATUS;
++
++	req->ep = ep;
++	req->req.length = 0;
++	req->req.status = -EINPROGRESS;
++	req->req.actual = 0;
++	req->req.complete = NULL;
++	req->dtd_count = 0;
++
++	if (fsl_req_to_dtd(req) == 0)
++		status = fsl_queue_td(ep, req);
++	else
++		return -ENOMEM;
++
++	if (status)
++		ERR("Can't queue ep0 status request \n");
++	list_add_tail(&req->queue, &ep->queue);
++
++	return status;
++}
++
++static inline int udc_reset_ep_queue(struct fsl_udc *udc, u8 pipe)
++{
++	struct fsl_ep *ep = get_ep_by_pipe(udc, pipe);
++
++	if (!ep->name)
++		return 0;
++
++	nuke(ep, -ESHUTDOWN);
++
++	return 0;
++}
++
++/*
++ * ch9 Set address
++ */
++static void ch9setaddress(struct fsl_udc *udc, u16 value, u16 index, u16 length)
++{
++	/* Save the new address to device struct */
++	udc->device_address = (u8) value;
++	/* Update usb state */
++	udc->usb_state = USB_STATE_ADDRESS;
++	/* Status phase */
++	if (ep0_prime_status(udc, EP_DIR_IN))
++		ep0stall(udc);
++}
++
++/*
++ * ch9 Get status
++ */
++static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
++			 u16 index, u16 length)
++{
++	u16 tmp = 0;		/* Status, cpu endian */
++
++	struct fsl_req *req;
++	struct fsl_ep *ep;
++	int status = 0;
++
++	ep = &udc->eps[0];
++
++	if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
++		/* Get device status */
++		tmp = 1 << USB_DEVICE_SELF_POWERED;
++		tmp |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
++	} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
++		/* Get interface status */
++		/* We don't have interface information in udc driver */
++		tmp = 0;
++	} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
++		/* Get endpoint status */
++		struct fsl_ep *target_ep;
++
++		target_ep = get_ep_by_pipe(udc, get_pipe_by_windex(index));
++
++		/* stall if endpoint doesn't exist */
++		if (!target_ep->desc)
++			goto stall;
++		tmp = dr_ep_get_stall(ep_index(target_ep), ep_is_in(target_ep))
++				<< USB_ENDPOINT_HALT;
++	}
++
++	udc->ep0_dir = USB_DIR_IN;
++	/* Borrow the per device status_req */
++	req = udc->status_req;
++	/* Fill in the reqest structure */
++	*((u16 *) req->req.buf) = cpu_to_le16(tmp);
++	req->ep = ep;
++	req->req.length = 2;
++	req->req.status = -EINPROGRESS;
++	req->req.actual = 0;
++	req->req.complete = NULL;
++	req->dtd_count = 0;
++
++	/* prime the data phase */
++	if ((fsl_req_to_dtd(req) == 0))
++		status = fsl_queue_td(ep, req);
++	else			/* no mem */
++		goto stall;
++
++	if (status) {
++		ERR("Can't respond to getstatus request \n");
++		goto stall;
++	}
++	list_add_tail(&req->queue, &ep->queue);
++	udc->ep0_state = DATA_STATE_XMIT;
++	return;
++stall:
++	ep0stall(udc);
++}
++
++static void ch9setconfig(struct fsl_udc *udc, u16 value, u16 index,
++			 u16 length)
++{
++	pr_debug("udc: 1 calling gadget driver->setup\n");
++	udc->ep0_dir = USB_DIR_IN;
++	if (udc->driver->setup(&udc->gadget, &udc->local_setup_buff) >= 0) {
++		/* gadget layer deal with the status phase */
++		udc->usb_state = USB_STATE_CONFIGURED;
++		udc->ep0_state = WAIT_FOR_OUT_STATUS;
++		pr_debug("udc: ep0_state now WAIT_FOR_OUT_STATUS\n");
++	}
++}
++
++static void setup_received_irq(struct fsl_udc *udc,
++			       struct usb_ctrlrequest *setup)
++{
++	u32 tmp;
++	u16 ptc = 0;		/* port test control */
++	int handled = 1;	/* set to zero if we do not handle the message,
++				   and should pass it to the gadget driver */
++
++	/*
++	 * gadget drivers expect the setup pkt to be in wire format,
++	 * so leave it alone and make local copies of stuff we need.
++	 */
++	u16 wValue = le16_to_cpu(setup->wValue);
++	u16 wIndex = le16_to_cpu(setup->wIndex);
++	u16 wLength = le16_to_cpu(setup->wLength);
++
++
++	pr_debug("udc: request=0x%x\n", setup->bRequest);
++
++	udc_reset_ep_queue(udc, 0);
++
++	/* We asume setup only occurs on EP0 */
++	if (setup->bRequestType & USB_DIR_IN)
++		udc->ep0_dir = USB_DIR_IN;
++	else
++		udc->ep0_dir = USB_DIR_OUT;
++
++	if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) {
++		/* handle class requests */
++		switch (setup->bRequest) {
++
++		case USB_BULK_RESET_REQUEST:
++			udc->ep0_dir = USB_DIR_IN;
++			if (udc->driver->setup(&udc->gadget,
++					       &udc->local_setup_buff) >= 0) {
++				udc->ep0_state = WAIT_FOR_SETUP;
++				pr_debug("udc: ep0_state now WAIT_FOR_SETUP\n");
++			}
++			break;
++
++		default:
++			handled = 0;
++			break;
++		}
++	} else if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
++		/* handle standard requests */
++		switch (setup->bRequest) {
++
++		case USB_REQ_GET_STATUS:
++			if ((setup->
++			     bRequestType & (USB_DIR_IN | USB_TYPE_STANDARD))
++			    != (USB_DIR_IN | USB_TYPE_STANDARD))
++				break;
++			ch9getstatus(udc, setup->bRequestType, wValue, wIndex,
++				     wLength);
++			break;
++
++		case USB_REQ_SET_ADDRESS:
++			if (setup->bRequestType !=
++			    (USB_DIR_OUT | USB_TYPE_STANDARD |
++			     USB_RECIP_DEVICE))
++				break;
++			ch9setaddress(udc, wValue, wIndex, wLength);
++			break;
++
++		case USB_REQ_SET_CONFIGURATION:
++			if (setup->bRequestType !=
++			    (USB_DIR_OUT | USB_TYPE_STANDARD |
++			     USB_RECIP_DEVICE))
++				break;
++			/* gadget layer take over the status phase */
++			ch9setconfig(udc, wValue, wIndex, wLength);
++			break;
++		case USB_REQ_SET_INTERFACE:
++			if (setup->bRequestType !=
++			    (USB_DIR_OUT | USB_TYPE_STANDARD |
++			     USB_RECIP_INTERFACE))
++				break;
++			udc->ep0_dir = USB_DIR_IN;
++			if (udc->driver->setup(&udc->gadget,
++					       &udc->local_setup_buff) >= 0)
++				/* gadget layer take over the status phase */
++				break;
++			/* Requests with no data phase */
++		case USB_REQ_CLEAR_FEATURE:
++		case USB_REQ_SET_FEATURE:
++			{	/* status transaction */
++				int rc = -EOPNOTSUPP;
++
++				if ((setup->bRequestType & USB_TYPE_MASK) !=
++				    USB_TYPE_STANDARD)
++					break;
++
++				/* we only support set/clear feature for
++				 * endpoint */
++				if (setup->bRequestType == USB_RECIP_ENDPOINT) {
++					int dir = (wIndex & 0x0080) ?
++					    EP_DIR_IN : EP_DIR_OUT;
++					int num = (wIndex & 0x000f);
++					struct fsl_ep *ep;
++
++					if (wValue != 0
++					    || wLength != 0
++					    || (num * 2 + dir) > udc->max_ep)
++						break;
++					ep = &udc->eps[num * 2 + dir];
++
++					if (setup->bRequest ==
++					    USB_REQ_SET_FEATURE) {
++						pr_debug("udc: udc: SET_FEATURE"
++							 " doing set_halt\n");
++						rc = fsl_ep_set_halt(&ep-> ep,
++								     1);
++					} else {
++						pr_debug("udc: CLEAR_FEATURE"
++							 " doing clear_halt\n");
++						rc = fsl_ep_set_halt(&ep-> ep,
++								     0);
++					}
++
++				} else if (setup->bRequestType ==
++					   USB_RECIP_DEVICE) {
++					if (setup->bRequest ==
++					    USB_REQ_SET_FEATURE) {
++						ptc = wIndex >> 8;
++						rc = 0;
++					}
++					if (!udc->gadget.is_otg)
++						break;
++					else if (setup->bRequest ==
++						 USB_DEVICE_B_HNP_ENABLE)
++						udc->gadget.b_hnp_enable = 1;
++					else if (setup->bRequest ==
++						 USB_DEVICE_A_HNP_SUPPORT)
++						udc->gadget.a_hnp_support = 1;
++					else if (setup->bRequest ==
++						 USB_DEVICE_A_ALT_HNP_SUPPORT)
++						udc->gadget.a_alt_hnp_support =
++						    1;
++					rc = 0;
++				}
++				if (rc == 0) {
++					/* send status only if
++					 * fsl_ep_set_halt success */
++					if (ep0_prime_status(udc, EP_DIR_IN))
++						ep0stall(udc);
++				}
++				break;
++			}
++		default:
++			handled = 0;
++			break;
++		}
++	} else {
++		/* vendor requests */
++		handled = 0;
++	}
++
++	if (!handled) {
++		if (udc->driver->setup(&udc->gadget, &udc->local_setup_buff)
++		    != 0) {
++			ep0stall(udc);
++		} else if (setup->bRequestType & USB_DIR_IN) {
++			udc->ep0_state = DATA_STATE_XMIT;
++			pr_debug("udc: ep0_state now DATA_STATE_XMIT\n");
++		} else {
++			udc->ep0_state = DATA_STATE_RECV;
++			pr_debug("udc: ep0_state now DATA_STATE_RECV\n");
++		}
++	}
++
++	if (ptc) {
++		tmp =fsl_readl(&dr_regs->portsc1) | ptc << 16;
++		fsl_writel(tmp, &dr_regs->portsc1);
++		pr_debug("udc: switch to test mode.\n");
++	}
++}
++
++/* Process request for Data or Status phase of ep0
++ * prime status phase if needed */
++static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0,
++		struct fsl_req *req)
++{
++	if (udc->usb_state == USB_STATE_ADDRESS) {
++		/* Set the new address */
++		u32 new_address = (u32) udc->device_address;
++		fsl_writel(new_address << USB_DEVICE_ADDRESS_BIT_POS,
++				&dr_regs->deviceaddr);
++	}
++
++	done(ep0, req, 0);
++
++	switch (udc->ep0_state) {
++	case DATA_STATE_XMIT:
++		/* receive status phase */
++		if (ep0_prime_status(udc, EP_DIR_OUT))
++			ep0stall(udc);
++		break;
++	case DATA_STATE_RECV:
++		/* send status phase */
++		if (ep0_prime_status(udc, EP_DIR_IN))
++			ep0stall(udc);
++		break;
++	case WAIT_FOR_OUT_STATUS:
++		udc->ep0_state = WAIT_FOR_SETUP;
++		break;
++	case WAIT_FOR_SETUP:
++		ERR("Unexpect ep0 packets \n");
++		break;
++	default:
++		ep0stall(udc);
++		break;
++	}
++}
++
++/* Tripwire mechanism to ensure a setup packet payload is extracted without
++ * being corrupted by another incoming setup packet */
++static void tripwire_handler(struct fsl_udc *udc, u8 ep_num, u8 *buffer_ptr)
++{
++	u32 temp;
++	struct ep_queue_head *qh;
++	struct fsl_usb2_platform_data *pdata = udc->pdata;
++
++	qh = &udc->ep_qh[ep_num * 2 + EP_DIR_OUT];
++
++	/* Clear bit in ENDPTSETUPSTAT */
++	temp = fsl_readl(&dr_regs->endptsetupstat);
++	fsl_writel(temp | (1 << ep_num), &dr_regs->endptsetupstat);
++
++	/* while a hazard exists when setup package arrives */
++	do {
++		/* Set Setup Tripwire */
++		temp = fsl_readl(&dr_regs->usbcmd);
++		fsl_writel(temp | USB_CMD_SUTW, &dr_regs->usbcmd);
++
++		/* Copy the setup packet to local buffer */
++		if (pdata->le_setup_buf) {
++			u32 *p = (u32 *)buffer_ptr;
++			u32 *s = (u32 *)qh->setup_buffer;
++			
++			/* Convert little endian setup buffer to CPU endian */
++			*p++ = le32_to_cpu(*s++);
++			*p = le32_to_cpu(*s);
++		} else {
++			memcpy(buffer_ptr, (u8 *) qh->setup_buffer, 8);
++		}
++	} while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_SUTW));
++
++	/* Clear Setup Tripwire */
++	temp = fsl_readl(&dr_regs->usbcmd);
++	fsl_writel(temp & ~USB_CMD_SUTW, &dr_regs->usbcmd);
++}
++
++/* process-ep_req(): free the completed Tds for this req */
++static int process_ep_req(struct fsl_udc *udc, int pipe,
++		struct fsl_req *curr_req)
++{
++	struct ep_td_struct *curr_td;
++	int	td_complete, actual, remaining_length, j, tmp;
++	int	status = 0;
++	int	errors = 0;
++	struct  ep_queue_head *curr_qh = &udc->ep_qh[pipe];
++	int direction = pipe % 2;
++
++	curr_td = curr_req->head;
++	td_complete = 0;
++	actual = curr_req->req.length;
++
++	for (j = 0; j < curr_req->dtd_count; j++) {
++		remaining_length = (hc32_to_cpu(curr_td->size_ioc_sts)
++					& DTD_PACKET_SIZE)
++				>> DTD_LENGTH_BIT_POS;
++		actual -= remaining_length;
++
++		(errors = hc32_to_cpu(curr_td->size_ioc_sts) & DTD_ERROR_MASK);
++		if (errors) {
++			if (errors & DTD_STATUS_HALTED) {
++				ERR("dTD error %08x QH=%d\n", errors, pipe);
++				/* Clear the errors and Halt condition */
++				tmp = hc32_to_cpu(curr_qh->size_ioc_int_sts);
++				tmp &= ~errors;
++				curr_qh->size_ioc_int_sts = cpu_to_hc32(tmp);
++				status = -EPIPE;
++				/* FIXME: continue with next queued TD? */
++
++				break;
++			}
++			if (errors & DTD_STATUS_DATA_BUFF_ERR) {
++				VDBG("Transfer overflow");
++				status = -EPROTO;
++				break;
++			} else if (errors & DTD_STATUS_TRANSACTION_ERR) {
++				VDBG("ISO error");
++				status = -EILSEQ;
++				break;
++			} else
++				ERR("Unknown error has occured (0x%x)!\r\n",
++					errors);
++
++		} else if (hc32_to_cpu(curr_td->size_ioc_sts) &
++					DTD_STATUS_ACTIVE) {
++			VDBG("Request not complete");
++			status = REQ_UNCOMPLETE;
++			return status;
++		} else if (remaining_length) {
++			if (direction) {
++				VDBG("Transmit dTD remaining length not zero");
++				status = -EPROTO;
++				break;
++			} else {
++				td_complete++;
++				break;
++			}
++		} else {
++			td_complete++;
++			VDBG("dTD transmitted successful ");
++		}
++
++		if (j != curr_req->dtd_count - 1)
++			curr_td = curr_td->next_td_virt;
++	}
++
++	if (status)
++		return status;
++
++	curr_req->req.actual = actual;
++
++	return 0;
++}
++
++/* Process a DTD completion interrupt */
++static void dtd_complete_irq(struct fsl_udc *udc)
++{
++	u32 bit_pos;
++	int i, ep_num, direction, bit_mask, status;
++	struct fsl_ep *curr_ep;
++	struct fsl_req *curr_req, *temp_req;
++
++	/* Clear the bits in the register */
++	bit_pos = fsl_readl(&dr_regs->endptcomplete);
++	fsl_writel(bit_pos, &dr_regs->endptcomplete);
++
++	if (!bit_pos)
++		return;
++
++	for (i = 0; i < udc->max_ep * 2; i++) {
++		ep_num = i >> 1;
++		direction = i % 2;
++
++		bit_mask = 1 << (ep_num + 16 * direction);
++
++		if (!(bit_pos & bit_mask))
++			continue;
++
++		curr_ep = get_ep_by_pipe(udc, i);
++
++		/* If the ep is configured */
++		if (curr_ep->name == NULL) {
++			WARN("Invalid EP?");
++			continue;
++		}
++
++		/* process the req queue until an uncomplete request */
++		list_for_each_entry_safe(curr_req, temp_req, &curr_ep->queue,
++				queue) {
++			status = process_ep_req(udc, i, curr_req);
++
++			VDBG("status of process_ep_req= %d, ep = %d",
++					status, ep_num);
++			if (status == REQ_UNCOMPLETE)
++				break;
++			/* write back status to req */
++			curr_req->req.status = status;
++
++			if (ep_num == 0) {
++				ep0_req_complete(udc, curr_ep, curr_req);
++				break;
++			} else {
++				done(curr_ep, curr_req, status);
++			}
++		}
++	}
++}
++
++/* Process a port change interrupt */
++static void port_change_irq(struct fsl_udc *udc)
++{
++	u32 speed;
++
++	VDBG("portsc=0x%x", fsl_readl(&dr_regs->portsc1) );
++	if (udc->bus_reset)
++		udc->bus_reset = 0;
++
++	/* Bus resetting is finished */
++	if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) {
++		/* Get the speed */
++		speed = fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_SPEED_MASK;
++		switch (speed) {
++		case PORTSCX_PORT_SPEED_HIGH:
++			udc->gadget.speed = USB_SPEED_HIGH;
++			break;
++		case PORTSCX_PORT_SPEED_FULL:
++			udc->gadget.speed = USB_SPEED_FULL;
++			break;
++		case PORTSCX_PORT_SPEED_LOW:
++			udc->gadget.speed = USB_SPEED_LOW;
++			break;
++		default:
++			udc->gadget.speed = USB_SPEED_UNKNOWN;
++			break;
++		}
++	}
++
++	/* Update USB state */
++	if (!udc->resume_state)
++		udc->usb_state = USB_STATE_DEFAULT;
++}
++
++/* Process suspend interrupt */
++static void suspend_irq(struct fsl_udc *udc)
++{
++	udc->resume_state = udc->usb_state;
++	udc->usb_state = USB_STATE_SUSPENDED;
++
++	/* report suspend to the driver, serial.c does not support this */
++	if (udc->driver->suspend)
++		udc->driver->suspend(&udc->gadget);
++}
++
++static void bus_resume(struct fsl_udc *udc)
++{
++	udc->usb_state = udc->resume_state;
++	udc->resume_state = 0;
++
++	/* report resume to the driver, serial.c does not support this */
++	if (udc->driver->resume)
++		udc->driver->resume(&udc->gadget);
++}
++
++/* Clear up all ep queues */
++static int reset_queues(struct fsl_udc *udc)
++{
++	u8 pipe;
++
++	for (pipe = 0; pipe < udc->max_pipes; pipe++)
++		udc_reset_ep_queue(udc, pipe);
++
++	/* report disconnect; the driver is already quiesced */
++	udc->driver->disconnect(&udc->gadget);
++
++	return 0;
++}
++
++/* Process reset interrupt */
++static void reset_irq(struct fsl_udc *udc)
++{
++	u32 temp;
++	unsigned long timeout;
++
++	/* Clear the device address */
++	temp = fsl_readl(&dr_regs->deviceaddr);
++	fsl_writel(temp & ~USB_DEVICE_ADDRESS_MASK, &dr_regs->deviceaddr);
++
++	udc->device_address = 0;
++
++	/* Clear usb state */
++	udc->resume_state = 0;
++	udc->ep0_dir = 0;
++	udc->ep0_state = WAIT_FOR_SETUP;
++	udc->remote_wakeup = 0;	/* default to 0 on reset */
++	udc->gadget.b_hnp_enable = 0;
++	udc->gadget.a_hnp_support = 0;
++	udc->gadget.a_alt_hnp_support = 0;
++
++	/* Clear all the setup token semaphores */
++	temp = fsl_readl(&dr_regs->endptsetupstat);
++	fsl_writel(temp, &dr_regs->endptsetupstat);
++
++	/* Clear all the endpoint complete status bits */
++	temp = fsl_readl(&dr_regs->endptcomplete);
++	fsl_writel(temp, &dr_regs->endptcomplete);
++
++	timeout = jiffies + 100;
++	while (fsl_readl(&dr_regs->endpointprime)) {
++		/* Wait until all endptprime bits cleared */
++		if (time_after(jiffies, timeout)) {
++			ERR("Timeout for reset\n");
++			break;
++		}
++		cpu_relax();
++	}
++
++	/* Write 1s to the flush register */
++	fsl_writel(0xffffffff, &dr_regs->endptflush);
++
++	if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) {
++		VDBG("Bus reset");
++		/* Bus is reseting */
++		udc->bus_reset = 1;
++		/* Reset all the queues, include XD, dTD, EP queue
++		 * head and TR Queue */
++		reset_queues(udc);
++		udc->usb_state = USB_STATE_DEFAULT;
++	} else {
++		VDBG("Controller reset");
++		/* initialize usb hw reg except for regs for EP, not
++		 * touch usbintr reg */
++		dr_controller_setup(udc);
++
++		/* Reset all internal used Queues */
++		reset_queues(udc);
++
++		ep0_setup(udc);
++
++		/* Enable DR IRQ reg, Set Run bit, change udc state */
++		dr_controller_run(udc);
++		udc->usb_state = USB_STATE_ATTACHED;
++	}
++}
++
++/*
++ * USB device controller interrupt handler
++ */
++static irqreturn_t fsl_udc_irq(int irq, void *_udc)
++{
++	struct fsl_udc *udc = _udc;
++	u32 irq_src;
++	irqreturn_t status = IRQ_NONE;
++	unsigned long flags;
++
++	/* Disable ISR for OTG host mode */
++	if (udc->stopped)
++		return IRQ_NONE;
++	spin_lock_irqsave(&udc->lock, flags);
++	irq_src = fsl_readl(&dr_regs->usbsts) & fsl_readl(&dr_regs->usbintr);
++	/* Clear notification bits */
++	fsl_writel(irq_src, &dr_regs->usbsts);
++
++	VDBG("irq_src [0x%8x]  portsc=0x%x", irq_src,
++	     fsl_readl(&dr_regs->portsc1));
++
++	/* Need to resume? */
++	if (udc->usb_state == USB_STATE_SUSPENDED)
++		if ((fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_SUSPEND) == 0)
++			bus_resume(udc);
++
++	/* USB Interrupt */
++	if (irq_src & USB_STS_INT) {
++		VDBG("Packet int");
++		/* Setup package, we only support ep0 as control ep */
++		if (fsl_readl(&dr_regs->endptsetupstat) & EP_SETUP_STATUS_EP0) {
++			tripwire_handler(udc, 0,
++					(u8 *) (&udc->local_setup_buff));
++			setup_received_irq(udc, &udc->local_setup_buff);
++			status = IRQ_HANDLED;
++		}
++
++		/* completion of dtd */
++		if (fsl_readl(&dr_regs->endptcomplete)) {
++			dtd_complete_irq(udc);
++			status = IRQ_HANDLED;
++		}
++	}
++
++	/* SOF (for ISO transfer) */
++	if (irq_src & USB_STS_SOF) {
++		status = IRQ_HANDLED;
++	}
++
++	/* Port Change */
++	if (irq_src & USB_STS_PORT_CHANGE) {
++		port_change_irq(udc);
++		status = IRQ_HANDLED;
++	}
++
++	/* Reset Received */
++	if (irq_src & USB_STS_RESET) {
++		reset_irq(udc);
++		status = IRQ_HANDLED;
++	}
++
++	/* Sleep Enable (Suspend) */
++	if (irq_src & USB_STS_SUSPEND) {
++		suspend_irq(udc);
++		status = IRQ_HANDLED;
++	}
++
++	if (irq_src & (USB_STS_ERR | USB_STS_SYS_ERR)) {
++		VDBG("Error IRQ %x ", irq_src);
++	}
++
++	spin_unlock_irqrestore(&udc->lock, flags);
++	return status;
++}
++
++/*----------------------------------------------------------------*
++ * Hook to gadget drivers
++ * Called by initialization code of gadget drivers
++*----------------------------------------------------------------*/
++int usb_gadget_register_driver(struct usb_gadget_driver *driver)
++{
++	int retval = -ENODEV;
++	unsigned long flags = 0;
++	struct fsl_udc *udc = udc_controller;
++
++	pr_debug("udc: udc=0x%p\n", udc);
++
++	if (!udc)
++		return -ENODEV;
++
++	if (!driver || (driver->speed != USB_SPEED_FULL
++			&& driver->speed != USB_SPEED_HIGH)
++			|| !driver->bind || !driver->disconnect
++			|| !driver->setup)
++		return -EINVAL;
++
++	if (udc->driver)
++		return -EBUSY;
++
++	/* lock is needed but whether should use this lock or another */
++	spin_lock_irqsave(&udc->lock, flags);
++
++	driver->driver.bus = 0;
++	udc->softconnect = 1;
++	/* hook up the driver */
++	udc->driver = driver;
++	udc->gadget.dev.driver = &driver->driver;
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	/* bind udc driver to gadget driver */
++	retval = driver->bind(&udc->gadget);
++	if (retval) {
++		pr_debug("bind to %s --> %d\n", driver->driver.name, retval);
++		udc->gadget.dev.driver = 0;
++		udc->driver = 0;
++		goto out;
++	}
++
++	/* Enable DR IRQ reg and Set usbcmd reg  Run bit */
++	if (udc->transceiver) {
++		/* Suspend the controller until OTG enables it */
++		udc_suspend(udc);
++		pr_debug("udc: suspend udc for OTG auto detect \n");
++
++		/* Export udc suspend/resume call to OTG */
++		udc->gadget.dev.parent->driver->suspend = fsl_udc_suspend;
++		udc->gadget.dev.parent->driver->resume = fsl_udc_resume;
++
++		retval = otg_set_peripheral(udc->transceiver, &udc->gadget);
++		if (retval < 0) {
++			printk(KERN_ERR "can't bind to transceiver\n");
++			driver->unbind(&udc->gadget);
++			udc->gadget.dev.driver = 0;
++			udc->driver = 0;
++			return retval;
++		}
++	} else {
++		/* Enable DR IRQ reg and Set usbcmd reg  Run bit */
++		dr_controller_run(udc);
++		udc->usb_state = USB_STATE_ATTACHED;
++		udc->ep0_state = WAIT_FOR_SETUP;
++		pr_debug("udc: ep0_state now WAIT_FOR_SETUP\n");
++		udc->ep0_dir = 0;
++	}
++
++	printk(KERN_INFO "%s: bind to driver %s \n", udc->gadget.name,
++		driver->driver.name);
++
++out:
++	return retval;
++}
++EXPORT_SYMBOL(usb_gadget_register_driver);
++
++/* Disconnect from gadget driver */
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++	struct fsl_ep *loop_ep;
++	unsigned long flags;
++
++	if (!udc_controller)
++		return -ENODEV;
++
++	if (!driver || driver != udc_controller->driver || !driver->unbind)
++		return -EINVAL;
++
++#ifdef CONFIG_USB_OTG
++	if (udc_controller->transceiver)
++		(void)otg_set_peripheral(udc_controller->transceiver, 0);
++#endif
++
++	/* stop DR, disable intr */
++	dr_controller_stop(udc_controller);
++
++	/* in fact, no needed */
++	udc_controller->usb_state = USB_STATE_ATTACHED;
++	udc_controller->ep0_state = WAIT_FOR_SETUP;
++	udc_controller->ep0_dir = 0;
++
++	/* stand operation */
++	spin_lock_irqsave(&udc_controller->lock, flags);
++	udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
++	nuke(&udc_controller->eps[0], -ESHUTDOWN);
++	list_for_each_entry(loop_ep, &udc_controller->gadget.ep_list,
++			ep.ep_list)
++		nuke(loop_ep, -ESHUTDOWN);
++	spin_unlock_irqrestore(&udc_controller->lock, flags);
++
++	/* unbind gadget and unhook driver. */
++	driver->unbind(&udc_controller->gadget);
++	udc_controller->gadget.dev.driver = 0;
++	udc_controller->driver = 0;
++
++	printk(KERN_INFO "unregistered gadget '%s'\n", driver->driver.name);
++	return 0;
++}
++EXPORT_SYMBOL(usb_gadget_unregister_driver);
++
++/*-------------------------------------------------------------------------
++		PROC File System Support
++-------------------------------------------------------------------------*/
++#ifdef CONFIG_USB_GADGET_DEBUG_FILES
++
++#include <linux/seq_file.h>
++
++static const char proc_filename[] = "driver/fsl_usb2_udc";
++
++static int fsl_proc_read(char *page, char **start, off_t off, int count,
++		int *eof, void *_dev)
++{
++	char *buf = page;
++	char *next = buf;
++	unsigned size = count;
++	unsigned long flags;
++	int t, i;
++	u32 tmp_reg;
++	struct fsl_ep *ep = NULL;
++	struct fsl_req *req;
++
++	struct fsl_udc *udc = udc_controller;
++	if (off != 0)
++		return 0;
++
++	spin_lock_irqsave(&udc->lock, flags);
++
++	/* ------basic driver infomation ---- */
++	t = scnprintf(next, size,
++			DRIVER_DESC "\n"
++			"%s version: %s\n"
++			"Gadget driver: %s\n\n",
++			driver_name, DRIVER_VERSION,
++			udc->driver ? udc->driver->driver.name : "(none)");
++	size -= t;
++	next += t;
++
++	/* ------ DR Registers ----- */
++	tmp_reg = fsl_readl(&dr_regs->usbcmd);
++	t = scnprintf(next, size,
++			"USBCMD reg: 0x%08x\n"
++			"\tSetupTW: %d\n"
++			"\tRun/Stop: %s\n\n",
++			tmp_reg,
++			(tmp_reg & USB_CMD_SUTW) ? 1 : 0,
++			(tmp_reg & USB_CMD_RUN_STOP) ? "Run" : "Stop");
++	size -= t;
++	next += t;
++
++	tmp_reg = fsl_readl(&dr_regs->usbsts);
++	t = scnprintf(next, size,
++			"USB Status Reg: 0x%08x\n"
++			"\tDr Suspend: %d   Reset Received: %d   "
++			"System Error: %s  USB Error Interrupt: %s\n\n",
++			tmp_reg,
++			(tmp_reg & USB_STS_SUSPEND) ? 1 : 0,
++			(tmp_reg & USB_STS_RESET) ? 1 : 0,
++			(tmp_reg & USB_STS_SYS_ERR) ? "Err" : "Normal",
++			(tmp_reg & USB_STS_ERR) ? "Err detected" : "No err");
++	size -= t;
++	next += t;
++
++	tmp_reg = fsl_readl(&dr_regs->usbintr);
++	t = scnprintf(next, size,
++			"USB Interrupt Enable Reg: 0x%08x\n"
++			"\tSleep Enable: %d   SOF Received Enable: %d  "
++			"Reset Enable: %d\n"
++			"\tSystem Error Enable: %d  "
++			"Port Change Dectected Enable: %d\n"
++			"\tUSB Error Intr Enable: %d  USB Intr Enable: %d\n\n",
++			tmp_reg,
++			(tmp_reg & USB_INTR_DEVICE_SUSPEND) ? 1 : 0,
++			(tmp_reg & USB_INTR_SOF_EN) ? 1 : 0,
++			(tmp_reg & USB_INTR_RESET_EN) ? 1 : 0,
++			(tmp_reg & USB_INTR_SYS_ERR_EN) ? 1 : 0,
++			(tmp_reg & USB_INTR_PTC_DETECT_EN) ? 1 : 0,
++			(tmp_reg & USB_INTR_ERR_INT_EN) ? 1 : 0,
++			(tmp_reg & USB_INTR_INT_EN) ? 1 : 0);
++	size -= t;
++	next += t;
++
++	tmp_reg = fsl_readl(&dr_regs->frindex);
++	t = scnprintf(next, size,
++			"USB Frame Index Reg:  Frame Number is 0x%x\n\n",
++			(tmp_reg & USB_FRINDEX_MASKS));
++	size -= t;
++	next += t;
++
++	tmp_reg = fsl_readl(&dr_regs->deviceaddr);
++	t = scnprintf(next, size,
++			"USB Device Address Reg:  Device Addr is 0x%x\n\n",
++			(tmp_reg & USB_DEVICE_ADDRESS_MASK));
++	size -= t;
++	next += t;
++
++	tmp_reg = fsl_readl(&dr_regs->endpointlistaddr);
++	t = scnprintf(next, size,
++			"USB Endpoint List Address Reg:"
++			"Device Addr is 0x%x\n\n",
++			(tmp_reg & USB_EP_LIST_ADDRESS_MASK));
++	size -= t;
++	next += t;
++
++	tmp_reg = fsl_readl(&dr_regs->portsc1);
++	t = scnprintf(next, size,
++		"USB Port Status&Control Reg:\n"
++		"\tPort Transceiver Type : %s" "Port Speed: %s \n"
++		"\tPHY Low Power Suspend: %s" "Port Reset: %s  "
++		"Port Suspend Mode: %s \n" "\tOver-current Change: %s  "
++		"Port Enable/Disable Change: %s\n"
++		"\tPort Enabled/Disabled: %s"
++		"Current Connect Status: %s\n\n", ( {
++			char *s;
++			switch (tmp_reg & PORTSCX_PTS_FSLS) {
++			case PORTSCX_PTS_UTMI:
++				s = "UTMI"; break;
++			case PORTSCX_PTS_ULPI:
++				s = "ULPI "; break;
++			case PORTSCX_PTS_FSLS:
++				s = "FS/LS Serial"; break;
++			default:
++				s = "None"; break;
++			}
++			s; } ), ( {
++			char *s;
++			switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) {
++			case PORTSCX_PORT_SPEED_FULL:
++				s = "Full Speed"; break;
++			case PORTSCX_PORT_SPEED_LOW:
++				s = "Low Speed"; break;
++			case PORTSCX_PORT_SPEED_HIGH:
++				s = "High Speed"; break;
++			default:
++				s = "Undefined"; break;
++			}
++			s;
++		} ),
++		(tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ?
++		"Normal PHY mode" : "Low power mode",
++		(tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" :
++		"Not in Reset",
++		(tmp_reg & PORTSCX_PORT_SUSPEND) ? "In " : "Not in",
++		(tmp_reg & PORTSCX_OVER_CURRENT_CHG) ? "Dected" :
++		"No",
++		(tmp_reg & PORTSCX_PORT_EN_DIS_CHANGE) ? "Disable" :
++		"Not change",
++		(tmp_reg & PORTSCX_PORT_ENABLE) ? "Enable" :
++		"Not correct",
++		(tmp_reg & PORTSCX_CURRENT_CONNECT_STATUS) ?
++		"Attached" : "Not-Att");
++	size -= t;
++	next += t;
++
++	tmp_reg = fsl_readl(&dr_regs->usbmode);
++	t = scnprintf(next, size,
++			"USB Mode Reg:" "Controller Mode is : %s\n\n", ( {
++				char *s;
++				switch (tmp_reg & USB_MODE_CTRL_MODE_HOST) {
++				case USB_MODE_CTRL_MODE_IDLE:
++					s = "Idle"; break;
++				case USB_MODE_CTRL_MODE_DEVICE:
++					s = "Device Controller"; break;
++				case USB_MODE_CTRL_MODE_HOST:
++					s = "Host Controller"; break;
++				default:
++					s = "None"; break;
++				}
++				s;
++			} ));
++	size -= t;
++	next += t;
++
++	tmp_reg = fsl_readl(&dr_regs->endptsetupstat);
++	t = scnprintf(next, size,
++			"Endpoint Setup Status Reg:" "SETUP on ep 0x%x\n\n",
++			(tmp_reg & EP_SETUP_STATUS_MASK));
++	size -= t;
++	next += t;
++
++	for (i = 0; i < udc->max_ep / 2; i++) {
++		tmp_reg = fsl_readl(&dr_regs->endptctrl[i]);
++		t = scnprintf(next, size, "EP Ctrl Reg [0x%x]: = [0x%x]\n",
++				i, tmp_reg);
++		size -= t;
++		next += t;
++	}
++	tmp_reg = fsl_readl(&dr_regs->endpointprime);
++	t = scnprintf(next, size, "EP Prime Reg = [0x%x]\n", tmp_reg);
++	size -= t;
++	next += t;
++
++#ifdef HAVE_SYS_REGS
++	tmp_reg = usb_sys_regs->snoop1;
++	t = scnprintf(next, size, "\nSnoop1 Reg : = [0x%x]\n\n", tmp_reg);
++	size -= t;
++	next += t;
++
++	tmp_reg = usb_sys_regs->control;
++	t = scnprintf(next, size, "General Control Reg : = [0x%x]\n\n",
++			tmp_reg);
++	size -= t;
++	next += t;
++#endif
++
++	/* ------fsl_udc, fsl_ep, fsl_request structure information ----- */
++	ep = &udc->eps[0];
++	t = scnprintf(next, size, "For %s Maxpkt is 0x%x index is 0x%x\n",
++			ep->ep.name, ep_maxpacket(ep), ep_index(ep));
++	size -= t;
++	next += t;
++
++	if (list_empty(&ep->queue)) {
++		t = scnprintf(next, size, "its req queue is empty\n\n");
++		size -= t;
++		next += t;
++	} else {
++		list_for_each_entry(req, &ep->queue, queue) {
++			t = scnprintf(next, size,
++				"req %p actual 0x%x length 0x%x  buf %p\n",
++				&req->req, req->req.actual,
++				req->req.length, req->req.buf);
++			size -= t;
++			next += t;
++		}
++	}
++	/* other gadget->eplist ep */
++	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
++		if (ep->desc) {
++			t = scnprintf(next, size,
++					"\nFor %s Maxpkt is 0x%x "
++					"index is 0x%x\n",
++					ep->ep.name, ep_maxpacket(ep),
++					ep_index(ep));
++			size -= t;
++			next += t;
++
++			if (list_empty(&ep->queue)) {
++				t = scnprintf(next, size,
++						"its req queue is empty\n\n");
++				size -= t;
++				next += t;
++			} else {
++				list_for_each_entry(req, &ep->queue, queue) {
++					t = scnprintf(next, size,
++						"req %p actual 0x%x length"
++						"0x%x  buf %p\n",
++						&req->req, req->req.actual,
++						req->req.length, req->req.buf);
++					size -= t;
++					next += t;
++					} /* end for each_entry of ep req */
++				}	/* end for else */
++			}	/* end for if(ep->queue) */
++		}		/* end (ep->desc) */
++
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	*eof = 1;
++	return count - size;
++}
++
++#define create_proc_file()	create_proc_read_entry(proc_filename, \
++				0, NULL, fsl_proc_read, NULL)
++
++#define remove_proc_file()	remove_proc_entry(proc_filename, NULL)
++
++#else				/* !CONFIG_USB_GADGET_DEBUG_FILES */
++
++#define create_proc_file()	do {} while (0)
++#define remove_proc_file()	do {} while (0)
++
++#endif				/* CONFIG_USB_GADGET_DEBUG_FILES */
++
++/*-------------------------------------------------------------------------*/
++
++/* Release udc structures */
++static void fsl_udc_release(struct device *dev)
++{
++	complete(udc_controller->done);
++	dma_free_coherent(dev, udc_controller->ep_qh_size,
++			udc_controller->ep_qh, udc_controller->ep_qh_dma);
++	kfree(udc_controller);
++}
++
++/******************************************************************
++	Internal structure setup functions
++*******************************************************************/
++/*------------------------------------------------------------------
++ * init resource for globle controller
++ * Return the udc handle on success or NULL on failure
++ ------------------------------------------------------------------*/
++static struct fsl_udc *__init struct_udc_setup(struct platform_device *pdev)
++{
++	struct fsl_udc *udc;
++	struct fsl_usb2_platform_data *pdata;
++	size_t size;
++
++	udc = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
++	if (udc == NULL) {
++		ERR("malloc udc failed\n");
++		return NULL;
++	}
++
++	pdata = pdev->dev.platform_data;
++	udc->phy_mode = pdata->phy_mode;	/* DDD FIXME */
++
++	/* max_ep_nr is bidirectional ep number, max_ep doubles the number */
++	udc->max_ep = pdata->max_ep_nr * 2;
++
++	udc->eps = kzalloc(sizeof(struct fsl_ep) * udc->max_ep, GFP_KERNEL);
++	if (!udc->eps) {
++		ERR("malloc fsl_ep failed\n");
++		goto cleanup;
++	}
++
++	/* initialized QHs, take care of alignment */
++	size = udc->max_ep * sizeof(struct ep_queue_head);
++	if (size < QH_ALIGNMENT)
++		size = QH_ALIGNMENT;
++	else if ((size % QH_ALIGNMENT) != 0) {
++		size += QH_ALIGNMENT + 1;
++		size &= ~(QH_ALIGNMENT - 1);
++	}
++	udc->ep_qh = dma_alloc_coherent(&pdev->dev, size,
++					&udc->ep_qh_dma, GFP_KERNEL);
++	if (!udc->ep_qh) {
++		ERR("malloc QHs for udc failed\n");
++		kfree(udc->eps);
++		goto cleanup;
++	}
++
++	udc->ep_qh_size = size;
++
++	/* Initialize ep0 status request structure */
++	udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL),
++			struct fsl_req, req);
++	/* allocate a small amount of memory to get valid address */
++	udc->status_req->req.buf = kmalloc(8, GFP_KERNEL);
++	udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf);
++
++	udc->resume_state = USB_STATE_NOTATTACHED;
++	udc->usb_state = USB_STATE_POWERED;
++	udc->ep0_dir = 0;
++	udc->remote_wakeup = 0;	/* default to 0 on reset */
++	spin_lock_init(&udc->lock);
++
++	return udc;
++
++cleanup:
++	kfree(udc);
++	return NULL;
++}
++
++/*----------------------------------------------------------------
++ * Setup the fsl_ep struct for eps
++ * Link fsl_ep->ep to gadget->ep_list
++ * ep0out is not used so do nothing here
++ * ep0in should be taken care
++ *--------------------------------------------------------------*/
++static int __init struct_ep_setup(struct fsl_udc *udc, unsigned char index,
++		char *name, int link)
++{
++	struct fsl_ep *ep = &udc->eps[index];
++
++	ep->udc = udc;
++	strcpy(ep->name, name);
++	ep->ep.name = ep->name;
++
++	ep->ep.ops = &fsl_ep_ops;
++	ep->stopped = 0;
++
++	/* for ep0: maxP defined in desc
++	 * for other eps, maxP is set by epautoconfig() called by gadget layer
++	 */
++	ep->ep.maxpacket = (unsigned short) ~0;
++
++	/* the queue lists any req for this ep */
++	INIT_LIST_HEAD(&ep->queue);
++
++	/* gagdet.ep_list used for ep_autoconfig so no ep0 */
++	if (link)
++		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
++	ep->gadget = &udc->gadget;
++	ep->qh = &udc->ep_qh[index];
++
++	return 0;
++}
++
++static int board_init(struct platform_device *pdev)
++{
++	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
++
++	pr_debug("udc: pdev=0x%p  pdata=0x%p\n", pdev, pdata);
++
++	/*
++	 * do platform specific init: check the clock, grab/config pins, etc.
++	 */
++	if (pdata->platform_init && pdata->platform_init(pdev) != 0)
++		return -EINVAL;
++
++	return 0;
++}
++
++/* Driver probe functions */
++
++static int __init fsl_udc_probe(struct platform_device *pdev)
++{
++	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
++	struct fsl_udc *udc;
++	unsigned int i;
++	struct otg_transceiver *transceiver = NULL;
++	int status = -ENODEV;
++	u32 id;
++	int irq_number;
++	u64 rsrc_start, rsrc_len;
++	int ret = -ENODEV;
++
++	pr_debug("udc: pdev=0x%p  pdata=0x%p\n", pdev, pdata);
++
++	if (board_init(pdev) != 0)
++		return -EINVAL;
++
++	/* Initialize the udc structure including QH member and other member */
++	udc = (struct fsl_udc *) struct_udc_setup(pdev);
++	udc_controller = udc;
++
++	if (!udc) {
++		ERR("udc is NULL \n");
++		return -ENOMEM;
++	}
++	dev_set_drvdata(&pdev->dev, udc);
++	pr_debug("udc_controller=0x%p", udc_controller);
++
++	udc->pdata = pdata;
++	udc->xcvr_type = pdata->xcvr_type;
++
++#ifdef CONFIG_USB_OTG
++	udc->transceiver = otg_get_transceiver();
++	pr_debug("udc: otg_get_transceiver returns 0x%p", udc->transceiver);
++#endif
++
++	if (pdev->resource[1].flags != IORESOURCE_IRQ)
++		return -ENODEV;
++
++	rsrc_start = pdev->resource[0].start;
++	rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
++
++	pr_debug("     start=0x%ux   end=0x%ux\n",
++		 pdev->resource[0].start, pdev->resource[0].end);
++	pr_debug("rsrc_start=0x%llx  rsrc_len=0x%llx\n", rsrc_start, rsrc_len);
++
++	dr_regs = (struct fsl_usb_device_regs *)pdata->regs;
++
++	pr_debug("udc: pdate=0x%p dr_regs=0x%p\n", pdata, dr_regs);
++	pr_debug("udc: hci_version=0x%x\n", dr_regs->hciversion);
++	pr_debug("udc: otgsc at 0x%p\n", &dr_regs->otgsc);
++
++	id = fsl_readl(&dr_regs->id);
++	printk(KERN_INFO "FSL2 USBOTG h/w ID=0x%x  revision=0x%x\n",
++	       id & 0x3f, id >> 16);
++
++	/* USB OTG module IRQ */
++	irq_number = platform_get_irq(pdev, 0);
++	if (irq_number > 128) {
++		status = request_irq(irq_number, fsl_udc_irq, IRQF_SHARED,
++				     driver_name, udc);
++		if (status) {
++			ERR("can't get irq %d, err=%d\n", irq_number, status);
++			goto err2;
++		}
++	} else {
++		status = -ENODEV;
++		goto err2;
++	}
++
++	if (!udc->transceiver) {
++		/* initialize usb hw reg except for regs for EP,
++		 * leave usbintr reg untouched*/
++		dr_controller_setup(udc);
++	}
++
++	/* here comes the stand operations for probe
++	 * set the fsl_udc->gadget.xxx
++	 */
++	udc->gadget.ops = &fsl_gadget_ops;
++
++	/* gadget.ep0 is a pointer */
++	udc->gadget.ep0 = &udc->eps[0].ep;
++	INIT_LIST_HEAD(&udc->gadget.ep_list);
++	udc->gadget.speed = USB_SPEED_UNKNOWN;
++	udc->gadget.name = driver_name;
++
++	/* Setup gadget.dev and register with kernel */
++	strcpy(udc->gadget.dev.bus_id, "gadget");
++	udc->gadget.dev.release = fsl_udc_release;
++	udc->gadget.dev.parent = &pdev->dev;
++
++	ret = device_register(&udc->gadget.dev);
++	if (ret < 0)
++		goto err3;
++
++	if (udc->transceiver)
++		udc->gadget.is_otg = 1;
++
++	/* setup QH and epctrl for ep0 */
++	ep0_setup(udc);
++
++	/* setup udc->eps[] for ep0 */
++	struct_ep_setup(udc_controller, 0, "ep0", 0);
++	/* for ep0: the desc defined here;
++	 * for other eps, gadget layer called ep_enable with defined desc
++	 */
++	udc->eps[0].desc = &fsl_ep0_desc;
++	udc->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD;
++
++	/* setup the udc->eps[] for non-control endpoints and link
++	 * to gadget.ep_list */
++	for (i = 1; i < (int)(udc->max_ep / 2); i++) {
++		char name[14];
++
++		sprintf(name, "ep%dout", i);
++		struct_ep_setup(udc, i * 2, name, 1);
++		sprintf(name, "ep%din", i);
++		struct_ep_setup(udc, i * 2 + 1, name, 1);
++	}
++
++	/* use dma_pool for TD management */
++	udc_controller->td_pool = dma_pool_create("udc_td", &pdev->dev,
++			sizeof(struct ep_td_struct),
++			DTD_ALIGNMENT, UDC_DMA_BOUNDARY);
++	if (udc->td_pool == NULL) {
++		ret = -ENOMEM;
++		goto err4;
++	}
++#if 0 // DDD why this? hoarks OTG host
++	pullup_disable(udc);
++#endif
++
++	create_proc_file();
++	return 0;
++
++err4:
++	device_unregister(&udc_controller->gadget.dev);
++err3:
++	free_irq(udc_controller->irq, udc_controller);
++err2:
++	kfree(udc);
++	if (transceiver)
++		put_device(transceiver->dev);
++	release_mem_region(pdev->resource[0].start,
++			   pdev->resource[0].end - pdev->resource[0].start + 1);
++	return status;
++
++}
++
++/* Driver removal functions
++ * Free resources
++ * Finish pending transaction
++ */
++static int __exit fsl_udc_remove(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	struct fsl_udc *udc = (struct fsl_udc *)dev_get_drvdata(dev);
++	struct fsl_usb2_platform_data *pdata;
++	int irq_number;
++
++	DECLARE_COMPLETION(done);
++
++	pdata = pdev->dev.platform_data;
++
++	if (!udc)
++		return -ENODEV;
++
++	udc->done = &done;
++
++	/* DR has been stopped in usb_gadget_unregister_driver() */
++
++	if (udc->transceiver) {
++		put_device(udc->transceiver->dev);
++		udc->transceiver = NULL;
++	}
++
++	/* remove proc */
++	remove_proc_file();
++
++	/* free irq */
++	irq_number = udc->irq;
++	free_irq(pdev->resource[1].start, udc);
++	udc->irq = 0;
++
++	/* Free allocated memory */
++	kfree(udc->status_req->req.buf);
++	kfree(udc->status_req);
++	kfree(udc_controller->eps);
++
++	dma_pool_destroy(udc_controller->td_pool);
++	/* deinitlaize all ep: strcut */
++	/* deinitialize ep0: reg and QH */
++
++	device_unregister(&udc->gadget.dev);
++	/* free udc --wait for the release() finished */
++	wait_for_completion(&done);
++
++	/*
++	 * do platform specific un-initialization:
++	 * release iomux pins, etc.
++	 */
++	if (pdata->platform_uninit)
++		pdata->platform_uninit(pdev);
++
++	return 0;
++}
++
++static int udc_suspend(struct fsl_udc *udc)
++{
++	udc->stopped = 1;
++	return 0;
++}
++
++/*
++ * Modify Power management attributes
++ * Used by OTG statemachine to disable gadget temporarily
++ * Here we stop the DR controller and disable the irq
++ * @param dev device controller pointer
++ * @param state current state
++ * @return The function returns 0 on success or -1 if failed
++ */
++static int fsl_udc_suspend(struct device *dev, pm_message_t state)
++{
++	struct fsl_udc *udc = (struct fsl_udc *)dev_get_drvdata(dev);
++	pr_debug("udc: Suspend. state=%d\n", state.event);
++	return udc_suspend(udc);
++}
++
++static int udc_resume(struct fsl_udc *udc)
++{
++	/*Enable DR irq reg and set controller Run */
++	if (udc->stopped) {
++		dr_controller_setup(udc);
++		dr_controller_run(udc);
++	}
++	udc->usb_state = USB_STATE_ATTACHED;
++	udc->ep0_state = WAIT_FOR_SETUP;
++	udc->ep0_dir = 0;
++	return 0;
++}
++
++/*
++ * Invoked on USB resume. May be called in_interrupt.
++ * Here we start the DR controller and enable the irq
++ * @param dev device controller pointer
++ * @return The function returns 0 on success or -1 if failed
++ */
++static int fsl_udc_resume(struct device *dev)
++{
++	struct fsl_udc *udc = (struct fsl_udc *)dev_get_drvdata(dev);
++	pr_debug("udc: Resume dev=0x%p udc=0x%p\n", dev, udc);
++
++	return udc_resume(udc);
++}
++
++/*-------------------------------------------------------------------------
++	Register entry point for the peripheral controller driver
++--------------------------------------------------------------------------*/
++static struct platform_driver udc_driver = {
++	.probe   = fsl_udc_probe,
++	.remove  = __exit_p(fsl_udc_remove),
++	.driver  = {
++		.name = (char *)driver_name,
++		.owner = THIS_MODULE,
++	},
++};
++
++static int __init udc_init(void)
++{
++	printk(KERN_INFO "%s version %s init \n", driver_desc, DRIVER_VERSION);
++	return platform_driver_register(&udc_driver);
++}
++
++module_init(udc_init);
++
++static void __exit udc_exit(void)
++{
++	platform_driver_unregister(&udc_driver);
++	printk(KERN_INFO "%s unregistered \n", driver_desc);
++}
++
++module_exit(udc_exit);
++
++MODULE_DESCRIPTION(DRIVER_DESC);
++MODULE_AUTHOR(DRIVER_AUTHOR);
++MODULE_LICENSE("GPL");
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -32,6 +32,7 @@ config USB_EHCI_HCD
+ config USB_EHCI_ROOT_HUB_TT
+ 	bool "Root Hub Transaction Translators (EXPERIMENTAL)"
+ 	depends on USB_EHCI_HCD && EXPERIMENTAL
++	default y if M54455
+ 	---help---
+ 	  Some EHCI chips have vendor-specific extensions to integrate
+ 	  transaction translators, so that no OHCI or UHCI companion
+@@ -60,12 +61,12 @@ config USB_EHCI_TT_NEWSCHED
+ 
+ config USB_EHCI_BIG_ENDIAN_MMIO
+ 	bool
+-	depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX)
++	depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX || M54455)
+ 	default y
+ 
+ config USB_EHCI_BIG_ENDIAN_DESC
+ 	bool
+-	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
++	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || M54455)
+ 	default y
+ 
+ config USB_EHCI_FSL
+@@ -260,3 +261,19 @@ config USB_R8A66597_HCD
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called r8a66597-hcd.
+ 
++choice
++	prompt "Select transceiver"
++	depends on M54455
++	default USB_M5445X_ULPI 
++
++config USB_M5445X_ULPI
++	bool "External ULPI"
++	---help---
++	  Enable support for the external HS ULPI transceiver.
++
++config USB_M5445X_FSLS
++	bool "On-chip (FL/LS only)"
++	---help---
++	  Enable support for the on-chip FL/LS transceiver.
++endchoice
++
+--- /dev/null
++++ b/drivers/usb/host/ehci-arc.c
+@@ -0,0 +1,431 @@
++/*
++ * drivers/usb/host/ehci-arc.c
++ *
++ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/* Note: this file is #included by ehci-hcd.c */
++
++#include <linux/platform_device.h>
++#include <linux/usb/fsl_usb2.h>
++#include <linux/fsl_devices.h>
++#include <linux/usb/otg.h>
++
++#include "ehci-fsl.h"
++
++
++/* FIXME: Power Managment is un-ported so temporarily disable it */
++#undef CONFIG_PM
++
++/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
++
++/* configure so an HC device and id are always provided */
++/* always called with process context; sleeping is OK */
++
++/**
++ * usb_hcd_fsl_probe - initialize FSL-based HCDs
++ * @drvier: Driver to be used for this HCD
++ * @pdev: USB Host Controller being probed
++ * Context: !in_interrupt()
++ *
++ * Allocates basic resources for this USB host controller.
++ *
++ */
++static int usb_hcd_fsl_probe(const struct hc_driver *driver,
++			     struct platform_device *pdev)
++{
++	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
++	struct usb_hcd *hcd;
++	struct resource *res;
++	int irq;
++	int retval;
++
++	pr_debug("initializing FSL-SOC USB Controller\n");
++
++	/* Need platform data for setup */
++	if (!pdata) {
++		dev_err(&pdev->dev,
++			"No platform data for %s.\n", pdev->dev.bus_id);
++		return -ENODEV;
++	}
++
++	retval = fsl_platform_verify(pdev);
++	if (retval)
++		return retval;
++
++	/*
++	 * do platform specific init: check the clock, grab/config pins, etc.
++	 */
++	if (pdata->platform_init && pdata->platform_init(pdev)) {
++		retval = -ENODEV;
++		goto err1;
++	}
++
++	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++	if (!res) {
++		dev_err(&pdev->dev,
++			"Found HC with no IRQ. Check %s setup!\n",
++			pdev->dev.bus_id);
++		return -ENODEV;
++	}
++	irq = res->start;
++
++	fsl_platform_set_vbus_power(pdev, 1);
++
++	hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id);
++	if (!hcd) {
++		retval = -ENOMEM;
++		goto err1;
++	}
++
++	if (pdata->regs) {
++		pr_debug("REGS: using pdata->regs (0x%p)\n", pdata->regs);
++		hcd->regs = pdata->regs;
++		hcd->rsrc_start = pdata->r_start;
++		hcd->rsrc_len = pdata->r_len;
++	} else {
++		pr_debug("REGS: NO pdata->regs\n");
++		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++		if (!res) {
++			dev_err(&pdev->dev, "Found HC with no register addr. "
++				"Check %s setup!\n", pdev->dev.bus_id);
++			retval = -ENODEV;
++			goto err2;
++		}
++		hcd->rsrc_start = res->start;
++		hcd->rsrc_len = res->end - res->start + 1;
++
++		/*
++		printk("DDD %s(): rsrc_start=0x%llx  rsrc_len=0x%llx  "
++			"pdata=0x%p\n", __FUNCTION__,
++			hcd->rsrc_start, hcd->rsrc_len, pdata);
++		*/
++
++		if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
++					driver->description)) {
++			dev_dbg(&pdev->dev, "request_mem_region failed\n");
++			retval = -EBUSY;
++			goto err2;
++		}
++		hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
++
++		if (hcd->regs == NULL) {
++			dev_dbg(&pdev->dev, "error mapping memory\n");
++			retval = -EFAULT;
++			goto err3;
++		}
++	}
++	hcd->power_budget = pdata->power_budget;
++
++	/* DDD
++	 * the following must be done by this point, otherwise the OTG
++	 * host port doesn't make it thru initializtion.
++	 * ehci_halt(), called by ehci_fsl_setup() returns -ETIMEDOUT
++	 */
++	fsl_platform_set_host_mode(hcd);
++
++	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
++	if (retval != 0)
++		goto err4;
++
++#if defined(CONFIG_USB_OTG)
++	if (pdata->does_otg) {
++		struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++
++		ehci->transceiver = otg_get_transceiver();
++
++		if (ehci->transceiver) {
++			retval = otg_set_host(ehci->transceiver,
++					      &ehci_to_hcd(ehci)->self);
++			if (retval) {
++				if (ehci->transceiver)
++					put_device(ehci->transceiver->dev);
++				goto err3;
++			}
++		} else {
++			printk(KERN_ERR "can't find transceiver\n");
++			retval = -ENODEV;
++			goto err3;
++		}
++	}
++#endif
++
++	return retval;
++
++err4:
++	/* DDD only if we did the iomap() iounmap(hcd->regs); */
++err3:
++	/* DDD only if we did a request_
++	 * release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++	 */
++err2:
++	usb_put_hcd(hcd);
++err1:
++	dev_err(&pdev->dev, "init %s fail, %d\n", pdev->dev.bus_id, retval);
++	if (pdata->platform_uninit)
++		pdata->platform_uninit(pdev);
++	return retval;
++}
++
++/* may be called without controller electrically present */
++/* may be called with controller, bus, and devices active */
++
++/**
++ * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
++ * @dev: USB Host Controller being removed
++ * Context: !in_interrupt()
++ *
++ * Reverses the effect of usb_hcd_fsl_probe().
++ *
++ */
++static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
++			       struct platform_device *pdev)
++{
++	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
++
++	/* DDD shouldn't we turn off the power here? */
++	fsl_platform_set_vbus_power(pdev, 0);
++
++	usb_remove_hcd(hcd);
++
++	if (ehci->transceiver) {
++		(void)otg_set_host(ehci->transceiver, 0);
++		put_device(ehci->transceiver->dev);
++	}
++	usb_put_hcd(hcd);
++
++	/*
++	 * do platform specific un-initialization:
++	 * release iomux pins, etc.
++	 */
++	if (pdata->platform_uninit)
++		pdata->platform_uninit(pdev);
++}
++
++/* called after powerup, by probe or system-pm "wakeup" */
++static int ehci_fsl_reinit(struct ehci_hcd *ehci)
++{
++	fsl_platform_usb_setup(ehci_to_hcd(ehci));
++	ehci_port_power(ehci, 0);
++
++	return 0;
++}
++
++/* called during probe() after chip reset completes */
++static int ehci_fsl_setup(struct usb_hcd *hcd)
++{
++	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++	int retval;
++	struct fsl_usb2_platform_data *pdata;
++	pdata = hcd->self.controller-> platform_data;
++
++	ehci->big_endian_desc = pdata->big_endian_desc;
++	ehci->big_endian_mmio = pdata->big_endian_mmio;
++
++	/* EHCI registers start at offset 0x100 */
++	ehci->caps = hcd->regs + 0x100;
++	ehci->regs = hcd->regs + 0x100 +
++	    HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
++
++	pr_debug("%s(): ehci->caps=0x%p  ehci->regs=0x%p\n", __FUNCTION__,
++		 ehci->caps, ehci->regs);
++
++	dbg_hcs_params(ehci, "reset");
++	dbg_hcc_params(ehci, "reset");
++
++	/* cache this readonly data; minimize chip reads */
++	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++
++	retval = ehci_halt(ehci);
++	if (retval)
++		return retval;
++
++	/* data structure init */
++	retval = ehci_init(hcd);
++	if (retval)
++		return retval;
++
++	ehci->is_tdi_rh_tt = 1;
++
++	ehci->sbrn = 0x20;
++
++	ehci_reset(ehci);
++
++	retval = ehci_fsl_reinit(ehci);
++	return retval;
++}
++
++static const struct hc_driver ehci_fsl_hc_driver = {
++	.description = hcd_name,
++	.product_desc = "Freescale On-Chip EHCI Host Controller",
++	.hcd_priv_size = sizeof(struct ehci_hcd),
++
++	/*
++	 * generic hardware linkage
++	 */
++	.irq = ehci_irq,
++	.flags = FSL_PLATFORM_HC_FLAGS,
++
++	/*
++	 * basic lifecycle operations
++	 */
++	.reset = ehci_fsl_setup,
++	.start = ehci_run,
++	.stop = ehci_stop,
++	.shutdown = ehci_shutdown,
++
++	/*
++	 * managing i/o requests and associated device resources
++	 */
++	.urb_enqueue = ehci_urb_enqueue,
++	.urb_dequeue = ehci_urb_dequeue,
++	.endpoint_disable = ehci_endpoint_disable,
++
++	/*
++	 * scheduling support
++	 */
++	.get_frame_number = ehci_get_frame,
++
++	/*
++	 * root hub support
++	 */
++	.hub_status_data = ehci_hub_status_data,
++	.hub_control = ehci_hub_control,
++	.bus_suspend = ehci_bus_suspend,
++	.bus_resume = ehci_bus_resume,
++};
++
++#ifdef CONFIG_USB_OTG
++/*
++ * Holding pen for all the EHCI registers except port_status,
++ * which is a zero element array and hence takes no space.
++ * The port_status register is saved in usb_ehci_portsc.
++ */
++volatile static struct ehci_regs usb_ehci_regs;
++static u32 usb_ehci_portsc;
++
++/* suspend/resume, section 4.3 */
++
++/* These routines rely on the bus (pci, platform, etc)
++ * to handle powerdown and wakeup, and currently also on
++ * transceivers that don't need any software attention to set up
++ * the right sort of wakeup.
++ *
++ * They're also used for turning on/off the port when doing OTG.
++ */
++static int ehci_fsl_drv_suspend(struct platform_device *pdev,
++				pm_message_t message)
++{
++	struct usb_hcd *hcd = platform_get_drvdata(pdev);
++	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++	u32 tmp;
++
++	pr_debug("%s pdev=0x%p  ehci=0x%p  hcd=0x%p\n",
++		 __FUNCTION__, pdev, ehci, hcd);
++	pr_debug("%s ehci->regs=0x%p  hcd->regs=0x%p  hcd->state=%d\n",
++		 __FUNCTION__, ehci->regs, hcd->regs, hcd->state);
++
++	hcd->state = HC_STATE_SUSPENDED;
++	pdev->dev.power.power_state = PMSG_SUSPEND;
++
++	if (hcd->driver->suspend)
++		return hcd->driver->suspend(hcd, message);
++
++	/* ignore non-host interrupts */
++	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
++
++	tmp = ehci_readl(ehci, &ehci->regs->command);
++	tmp &= ~CMD_RUN;
++	ehci_writel(ehci, tmp, &ehci->regs->command);
++
++	memcpy((void *)&usb_ehci_regs, ehci->regs, sizeof(struct ehci_regs));
++	usb_ehci_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
++
++	/* clear the W1C bits */
++	usb_ehci_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
++
++	fsl_platform_set_vbus_power(pdev, 0);
++	/* clear PP to cut power to the port */
++	tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
++	tmp &= ~PORT_POWER;
++	ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
++
++	return 0;
++}
++
++static int ehci_fsl_drv_resume(struct platform_device *pdev)
++{
++	struct usb_hcd *hcd = platform_get_drvdata(pdev);
++	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++	u32 tmp;
++	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
++
++	pr_debug("%s pdev=0x%p  pdata=0x%p  ehci=0x%p  hcd=0x%p\n",
++		 __FUNCTION__, pdev, pdata, ehci, hcd);
++
++	pr_debug("%s ehci->regs=0x%p  hcd->regs=0x%p",
++		 __FUNCTION__, ehci->regs, hcd->regs);
++
++	memcpy(ehci->regs, (void *)&usb_ehci_regs, sizeof(struct ehci_regs));
++	ehci_writel(ehci, usb_ehci_portsc, &ehci->regs->port_status[0]);
++
++	tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
++	ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
++
++	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
++	hcd->state = HC_STATE_RUNNING;
++	pdev->dev.power.power_state = PMSG_ON;
++
++	tmp = ehci_readl(ehci, &ehci->regs->command);
++	tmp |= CMD_RUN;
++	ehci_writel(ehci, tmp, &ehci->regs->command);
++
++	fsl_platform_set_vbus_power(pdev, 1);
++
++	usb_hcd_resume_root_hub(hcd);
++
++	return 0;
++}
++#endif				/* CONFIG_USB_OTG */
++
++static int ehci_fsl_drv_probe(struct platform_device *pdev)
++{
++	if (usb_disabled())
++		return -ENODEV;
++
++	return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
++}
++
++static int ehci_fsl_drv_remove(struct platform_device *pdev)
++{
++	struct usb_hcd *hcd = platform_get_drvdata(pdev);
++
++	usb_hcd_fsl_remove(hcd, pdev);
++
++	return 0;
++}
++
++MODULE_ALIAS("fsl-ehci");
++
++static struct platform_driver ehci_fsl_driver = {
++	.probe = ehci_fsl_drv_probe,
++	.remove = ehci_fsl_drv_remove,
++	.shutdown = usb_hcd_platform_shutdown,
++#ifdef CONFIG_USB_OTG
++	.suspend = ehci_fsl_drv_suspend,
++	.resume  = ehci_fsl_drv_resume,
++#endif
++	.driver = {
++		   .name = "fsl-ehci",
++		   },
++};
+--- a/drivers/usb/host/ehci-fsl.h
++++ b/drivers/usb/host/ehci-fsl.h
+@@ -18,6 +18,8 @@
+ #ifndef _EHCI_FSL_H
+ #define _EHCI_FSL_H
+ 
++#include <linux/usb/fsl_xcvr.h>
++
+ /* offsets for the non-ehci registers in the FSL SOC USB controller */
+ #define FSL_SOC_USB_ULPIVP	0x170
+ #define FSL_SOC_USB_PORTSC1	0x184
+@@ -34,5 +36,29 @@
+ #define FSL_SOC_USB_PRICTRL	0x40c	/* NOTE: big-endian */
+ #define FSL_SOC_USB_SICTRL	0x410	/* NOTE: big-endian */
+ #define FSL_SOC_USB_CTRL	0x500	/* NOTE: big-endian */
+-#define SNOOP_SIZE_2GB		0x1e
++
++#ifdef CONFIG_MPC834x
++#include <sysdev/fsl_usb.h>
++#endif
++
++#ifdef CONFIG_ARCH_MX3
++#include <asm/arch/mx31_usb.h>
++#endif
++
++#ifdef CONFIG_ARCH_MX27
++#include <asm/arch/mx27_usb.h>
++#endif
++
++#ifdef CONFIG_M54455
++#include <asm-m68k/mcf5445x_usb.h>
++#endif
++
++
++static void fsl_platform_set_vbus_power(struct platform_device *pdev, int on)
++{
++	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
++
++	if (pdata->xcvr_ops && pdata->xcvr_ops->set_vbus_power)
++		pdata->xcvr_ops->set_vbus_power(pdata, on);
++}
+ #endif				/* _EHCI_FSL_H */
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1043,6 +1043,11 @@ MODULE_LICENSE ("GPL");
+ #define	PLATFORM_DRIVER		ixp4xx_ehci_driver
+ #endif
+ 
++#ifdef CONFIG_M54455
++#include "ehci-arc.c"
++#define	PLATFORM_DRIVER		ehci_fsl_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
+ #error "missing bus glue for ehci-hcd"
+--- a/drivers/usb/host/ehci-mem.c
++++ b/drivers/usb/host/ehci-mem.c
+@@ -40,7 +40,8 @@ static inline void ehci_qtd_init(struct 
+ {
+ 	memset (qtd, 0, sizeof *qtd);
+ 	qtd->qtd_dma = dma;
+-	qtd->hw_token = cpu_to_le32 (QTD_STS_HALT);
++	// DDD official code` has: qtd->hw_token = cpu_to_le32 (QTD_STS_HALT);
++	qtd->hw_token = cpu_to_hc32 (ehci, QTD_STS_HALT);
+ 	qtd->hw_next = EHCI_LIST_END(ehci);
+ 	qtd->hw_alt_next = EHCI_LIST_END(ehci);
+ 	INIT_LIST_HEAD (&qtd->qtd_list);
+@@ -211,9 +212,11 @@ static int ehci_mem_init (struct ehci_hc
+ 	}
+ 
+ 	/* Hardware periodic table */
+-	ehci->periodic = (__le32 *)
++	// DDD official code has: ehci->periodic = (__le32 *)
++	ehci->periodic = (__hc32 *)
+ 		dma_alloc_coherent (ehci_to_hcd(ehci)->self.controller,
+-			ehci->periodic_size * sizeof(__le32),
++			// DDD official: ehci->periodic_size * sizeof(__le32),
++			ehci->periodic_size * sizeof(__hc32),
+ 			&ehci->periodic_dma, 0);
+ 	if (ehci->periodic == NULL) {
+ 		goto fail;
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -122,6 +122,12 @@ struct ehci_hcd {			/* one per controlle
+ 
+ 	u8			sbrn;		/* packed release number */
+ 
++	/*
++	 * OTG controllers and transceivers need software interaction;
++	 * other external transceivers should be software-transparent
++	 */
++	struct otg_transceiver	*transceiver;
++
+ 	/* irq statistics */
+ #ifdef EHCI_STATS
+ 	struct ehci_stats	stats;
+@@ -753,6 +759,22 @@ ehci_port_speed(struct ehci_hcd *ehci, u
+ #define writel_be(val, addr)	__raw_writel(val, (__force unsigned *)addr)
+ #endif
+ 
++#if defined(CONFIG_COLDFIRE)
++/*
++ * Sorry, include/asm-m68k/io.h is messed up.  It will give you a
++ * BE readl or a LE readl depending on whether or not CONFIG_PCI is set.
++ * how broken is that?  Do the right thing here.
++ */
++#undef readl
++#undef writel
++
++#define readl(addr)		in_le32((__force unsigned *)(addr))
++#define writel(val,addr)	out_le32((__force unsigned *)(addr),(val))
++
++#define readl_be(addr)		in_be32((__force unsigned *)(addr))
++#define writel_be(val, addr)	out_be32((__force unsigned *)(addr), (val))
++#endif
++
+ static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
+ 		__u32 __iomem * regs)
+ {
+--- /dev/null
++++ b/drivers/usb/otg/Makefile
+@@ -0,0 +1,5 @@
++#
++# Makefile for USB OTG controller  driver
++#
++fsl_usb2_otg-objs		:= fsl_otg.o otg_fsm.o
++obj-y				+= fsl_usb2_otg.o
+--- /dev/null
++++ b/drivers/usb/otg/fsl_otg.c
+@@ -0,0 +1,1515 @@
++/*
++ * Copyright (c) Freescale Semiconductor, Inc. 2006-2007
++ *
++ * USB OTG ULPI driver
++ *
++ * Based on code for MPC from:
++ *  Leo Li<LeoLi@freescale.com>
++ *  Jerry Huang<Chang-Ming.Huang@freescale.com>
++ *
++ * and M5329 code from
++ *  Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
++ *  Andrey Butok
++ *
++ *  Initialization based on code from Shlomi Gridish.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the  GNU General Public License along
++ * with this program; if not, write  to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ ***************************************************************************
++ * Changes:
++ *   v0.3	08 August 2007		Duck
++ *   v0.2	20 October 2006		Andrey Butok
++ *		Issues fixing and some changes.
++ *   v0.1	September 2006		Yaroslav Vinogradov
++ *		Initial version.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/ioport.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/smp_lock.h>
++#include <linux/proc_fs.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/reboot.h>
++#include <linux/timer.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/usb.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/usb/ch9.h>
++#include <linux/usb_gadget.h>
++#include <linux/workqueue.h>
++#include <linux/time.h>
++#include <linux/fsl_devices.h>
++#include <linux/usb/fsl_usb2.h>
++
++#include <linux/io.h>
++
++#if defined CONFIG_M54455
++#include <asm/mcfsim.h>
++#endif
++
++#define USE_WORK_QUEUES
++#include "fsl_otg.h"
++
++#define CONFIG_USB_OTG_DEBUG_FILES
++#define DRIVER_VERSION "Revision: 1.56"
++#define DRIVER_AUTHOR "Freescale Semiconductor Inc."
++#define DRIVER_DESC "Freescale USB OTG ULPI Driver"
++#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
++
++MODULE_DESCRIPTION("Freescale USB OTG Controller Driver");
++
++static const char driver_name[] = "fsl-usb2-otg";
++
++static spinlock_t usb_dr_regs_lock;
++
++/*#define HA_DATA_PULSE 1*/
++
++volatile static struct fsl_usb_device_regs *usb_dr_regs;
++static struct fsl_otg *fsl_otg_dev;
++static int srp_wait_done;
++
++/* Driver specific timers */
++struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr,
++	*b_srp_wait_tmr, *a_wait_enum_tmr;
++
++static struct list_head active_timers;
++
++static struct fsl_otg_config fsl_otg_initdata = {
++	.otg_port = 1,
++};
++
++static void dump_state(const char *string, struct otg_fsm *fsm)
++{
++	printk(KERN_DEBUG "%s\n\tOTG state: %s\n", string,
++	       state_string(fsl_otg_dev->otg.state));
++	printk(KERN_DEBUG "\tFSM protocol=%s\n", fsm->protocol ?
++	       (fsm->protocol == PROTO_HOST ? "Host" : "Gadget")
++	       : "None");
++
++	/* regs */
++	printk(KERN_DEBUG "\t  OTGSC 0x%08x\n",
++	       fsl_readl(&usb_dr_regs->otgsc));
++	printk(KERN_DEBUG "\tPORTSC1 0x%08x\n",
++	       fsl_readl(&usb_dr_regs->portsc1));
++	printk(KERN_DEBUG "\tUSBMODE 0x%08x\n",
++	       fsl_readl(&usb_dr_regs->usbmode));
++	printk(KERN_DEBUG "\t USBCMD 0x%08x\n",
++	       fsl_readl(&usb_dr_regs->usbcmd));
++	printk(KERN_DEBUG "\t USBSTS 0x%08x\n",
++	       fsl_readl(&usb_dr_regs->usbsts));
++
++	/* ------ State Machine Variables ----- */
++	printk(KERN_DEBUG "\ta_bus_req: %d\n", fsm->a_bus_req);
++	printk(KERN_DEBUG "\tb_bus_req: %d\n", fsm->b_bus_req);
++	printk(KERN_DEBUG "\ta_bus_resume: %d\n", fsm->a_bus_resume);
++	printk(KERN_DEBUG "\ta_bus_suspend: %d\n", fsm->a_bus_suspend);
++	printk(KERN_DEBUG "\ta_conn: %d\n", fsm->a_conn);
++	printk(KERN_DEBUG "\ta_sess_vld: %d\n", fsm->a_sess_vld);
++	printk(KERN_DEBUG "\ta_srp_det: %d\n", fsm->a_srp_det);
++	printk(KERN_DEBUG "\ta_vbus_vld: %d\n", fsm->a_vbus_vld);
++	printk(KERN_DEBUG "\tb_bus_resume: %d\n", fsm->b_bus_resume);
++	printk(KERN_DEBUG "\tb_bus_suspend: %d\n", fsm->b_bus_suspend);
++	printk(KERN_DEBUG "\tb_conn: %d\n", fsm->b_conn);
++	printk(KERN_DEBUG "\tb_se0_srp: %d\n", fsm->b_se0_srp);
++	printk(KERN_DEBUG "\tb_sess_end: %d\n", fsm->b_sess_end);
++	printk(KERN_DEBUG "\tb_sess_vld: %d\n", fsm->b_sess_vld);
++	printk(KERN_DEBUG "\tid: %d\n", fsm->id);
++}
++
++
++/* Routines to access transceiver ULPI registers */
++u8 view_ulpi(u8 addr)
++{
++	u32 temp;
++
++	temp = 0x40000000 | (addr << 16);
++	fsl_writel(temp, &usb_dr_regs->ulpiview);
++
++	udelay(1000);
++
++	/* DDD timeout this loop: */
++	do {
++		temp = fsl_readl(&usb_dr_regs->ulpiview);
++	} while (temp & 0x40000000);
++
++	return (temp & 0x0000ff00) >> 8;
++}
++
++int write_ulpi(u8 addr, u8 data)
++{
++	u32 temp;
++
++	temp = 0x60000000 | (addr << 16) | data;
++	fsl_writel(temp, &usb_dr_regs->ulpiview);
++	return 0;
++}
++
++/* prototype declaration */
++void fsl_otg_add_timer(void *timer);
++void fsl_otg_del_timer(void *timer);
++
++/* -------------------------------------------------------------*/
++/* Operations that will be called from OTG Finite State Machine */
++
++/* Charge vbus for vbus pulsing in SRP */
++void fsl_otg_chrg_vbus(int on)
++{
++	u32 tmp;
++
++	VDBG(" %d\n", on);
++
++	tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
++
++	if (on) {
++		tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE;
++		tmp |= OTGSC_CTRL_VBUS_CHARGE;
++	} else {
++		tmp &= ~OTGSC_CTRL_VBUS_CHARGE;
++	}
++	fsl_writel(tmp, &usb_dr_regs->otgsc);
++}
++
++/* Discharge vbus through a resistor to ground */
++void fsl_otg_dischrg_vbus(int on)
++{
++	u32 tmp;
++
++	VDBG(" %d\n", on);
++
++	tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
++
++	if (on)
++		tmp |= OTGSC_CTRL_VBUS_DISCHARGE;
++	else
++		tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE;
++
++	fsl_writel(tmp, &usb_dr_regs->otgsc);
++}
++
++/* A-device driver vbus, controlled through PP bit in PORTSC */
++void fsl_otg_drv_vbus(int on)
++{
++	u32 tmp;
++
++	VDBG(" %d\n", on);
++
++	tmp = fsl_readl(&usb_dr_regs->portsc1) & ~PORTSCX_W1C_BITS;
++
++	if (on)
++		tmp |= PORTSCX_PORT_POWER;
++	else
++		tmp &= ~PORTSCX_PORT_POWER;
++
++	fsl_writel(tmp, &usb_dr_regs->portsc1);
++}
++
++/* Pull-up D+, signalling connect by periperal. Also used in
++ * data-line pulsing in SRP */
++void fsl_otg_loc_conn(int on)
++{
++	u32 tmp;
++
++	VDBG(" %d\n", on);
++
++	tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
++
++	if (on)
++		tmp |= OTGSC_CTRL_DATA_PULSING;
++	else
++		tmp &= ~OTGSC_CTRL_DATA_PULSING;
++
++	fsl_writel(tmp, &usb_dr_regs->otgsc);
++}
++
++/* Generate SOF by host.  This is controlled through suspend/resume the
++ * port.  In host mode, controller will automatically send SOF.
++ * Suspend will block the data on the port.
++ */
++void fsl_otg_loc_sof(int on)
++{
++	u32 tmp;
++
++	VDBG(" %d\n", on);
++
++	tmp = fsl_readl(&usb_dr_regs->portsc1) & ~PORTSCX_W1C_BITS;
++
++	if (on)
++		tmp |= PORTSCX_PORT_FORCE_RESUME;
++	else
++		tmp |= PORTSCX_PORT_SUSPEND;
++
++	fsl_writel(tmp, &usb_dr_regs->portsc1);
++}
++
++/* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */
++void fsl_otg_start_pulse(void)
++{
++	u32 __attribute__ ((unused)) tmp;
++
++	VDBG("\n");
++	srp_wait_done = 0;
++
++#ifdef HA_DATA_PULSE
++	tmp = fsl_readl(&usb_dr_regs->otgsc) &= ~OTGSC_INTSTS_MASK;
++	tmp |= OTGSC_HA_DATA_PULSE;
++	fsl_writel(tmp, &usb_dr_regs->otgsc);
++#else
++	fsl_otg_loc_conn(1);
++#endif
++
++	fsl_otg_add_timer(b_data_pulse_tmr);
++}
++
++void fsl_otg_pulse_vbus(void);
++
++void b_data_pulse_end(unsigned long foo)
++{
++#ifdef HA_DATA_PULSE
++#else
++	fsl_otg_loc_conn(0);
++#endif
++
++	/* Do VBUS pulse after data pulse */
++	fsl_otg_pulse_vbus();
++}
++
++void fsl_otg_pulse_vbus(void)
++{
++	srp_wait_done = 0;
++	fsl_otg_chrg_vbus(1);
++	/* start the timer to end vbus charge */
++	fsl_otg_add_timer(b_vbus_pulse_tmr);
++}
++
++void b_vbus_pulse_end(unsigned long foo)
++{
++	fsl_otg_chrg_vbus(0);
++
++	/* As USB3300 using the same a_sess_vld and b_sess_vld voltage
++	 * we need to discharge the bus for a while to distinguish
++	 * residual voltage of vbus pulsing and A device pull up */
++	fsl_otg_dischrg_vbus(1);
++	fsl_otg_add_timer(b_srp_wait_tmr);
++}
++
++void b_srp_end(unsigned long foo)
++{
++	fsl_otg_dischrg_vbus(0);
++	srp_wait_done = 1;
++
++	if ((fsl_otg_dev->otg.state == OTG_STATE_B_SRP_INIT) &&
++	    fsl_otg_dev->fsm.b_sess_vld)
++		fsl_otg_dev->fsm.b_srp_done = 1;
++}
++
++/* Workaround for a_host suspending too fast.  When a_bus_req=0,
++ * a_host will start by SRP.  It needs to set b_hnp_enable before
++ * actually suspending to start HNP
++ */
++void a_wait_enum(unsigned long foo)
++{
++	VDBG("a_wait_enum timeout\n");
++	if (!fsl_otg_dev->otg.host->b_hnp_enable)
++		fsl_otg_add_timer(a_wait_enum_tmr);
++	else
++		otg_statemachine(&fsl_otg_dev->fsm);
++}
++
++/* ------------------------------------------------------*/
++
++/* The timeout callback function to set time out bit */
++void set_tmout(unsigned long indicator)
++{
++	*(int *)indicator = 1;
++}
++
++/* Initialize timers */
++void fsl_otg_init_timers(struct otg_fsm *fsm)
++{
++	/* FSM used timers */
++	fsm->a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
++				(unsigned long)&fsm->a_wait_vrise_tmout);
++	fsm->a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
++				(unsigned long)&fsm->a_wait_bcon_tmout);
++	fsm->a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
++				(unsigned long)&fsm->a_aidl_bdis_tmout);
++	fsm->b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
++				(unsigned long)&fsm->b_ase0_brst_tmout);
++	fsm->b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
++				(unsigned long)&fsm->b_se0_srp);
++	fsm->b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL,
++				(unsigned long)&fsm->b_srp_done);
++	fsm->a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10,
++				(unsigned long)&fsm);
++
++	/* device driver used timers */
++	b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0);
++	b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end,
++				TB_DATA_PLS, 0);
++	b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end,
++				TB_VBUS_PLS, 0);
++
++}
++
++/* Add timer to timer list */
++void fsl_otg_add_timer(void *gtimer)
++{
++	struct fsl_otg_timer *timer = (struct fsl_otg_timer *)gtimer;
++	struct fsl_otg_timer *tmp_timer;
++
++	/* Check if the timer is already in the active list,
++	 * if so update timer count
++	 */
++	list_for_each_entry(tmp_timer, &active_timers, list)
++	    if (tmp_timer == timer) {
++		timer->count = timer->expires;
++		return;
++	}
++	timer->count = timer->expires;
++	list_add_tail(&timer->list, &active_timers);
++}
++
++/* Remove timer from the timer list; clear timeout status */
++void fsl_otg_del_timer(void *gtimer)
++{
++	struct fsl_otg_timer *timer = (struct fsl_otg_timer *)gtimer;
++	struct fsl_otg_timer *tmp_timer, *del_tmp;
++
++	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
++		if (tmp_timer == timer)
++			list_del(&timer->list);
++}
++
++/*
++ * Reduce timer count by 1, and find timeout conditions.
++ * Called by fsl_otg 1ms timer interrupt
++ */
++int fsl_otg_tick_timer(void)
++{
++	struct fsl_otg_timer *tmp_timer, *del_tmp;
++	int expired = 0;
++
++	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
++		tmp_timer->count--;
++		/* check if timer expires */
++		if (!tmp_timer->count) {
++			list_del(&tmp_timer->list);
++			tmp_timer->function(tmp_timer->data);
++			expired = 1;
++		}
++	}
++
++	return expired;
++}
++
++/* Reset controller, not reset the bus */
++void otg_reset_controller(void)
++{
++	u32 command;
++	unsigned long flags;
++	int timeout;
++
++	VDBG("\n");
++
++	spin_lock_irqsave(&usb_dr_regs_lock, flags);
++
++	command = fsl_readl(&usb_dr_regs->usbcmd);
++	command |= USB_CMD_CTRL_RESET;
++	fsl_writel(command, &usb_dr_regs->usbcmd);
++	spin_unlock_irqrestore(&usb_dr_regs_lock, flags);
++
++	/* Wait reset completed */
++	timeout = 500;
++	while (fsl_readl(&usb_dr_regs->usbcmd) & USB_CMD_CTRL_RESET)
++		udelay(1);
++	if (timeout <= 0)
++		ERR("%s - USBCMD_RST never clear. Timeout is %d \n",
++			__FUNCTION__, timeout);
++}
++
++/* Call suspend/resume routines in host driver */
++int fsl_otg_start_host(struct otg_fsm *fsm, int on)
++{
++	struct otg_transceiver *xceiv = fsm->transceiver;
++	struct device *dev;
++	struct fsl_otg *otg_dev = container_of(xceiv, struct fsl_otg, otg);
++	u32 retval = 0;
++
++	if (!xceiv->host)
++		return -ENODEV;
++
++	dev = xceiv->host->controller;
++
++	/*
++	 * Update a_vbus_vld state as a_vbus_vld int is disabled
++	 * in device mode
++	 */
++	fsm->a_vbus_vld =
++		!!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID);
++	if (on) {
++		/* start fsl usb host controller */
++		if (otg_dev->host_working)
++			goto end;
++		else {
++			otg_reset_controller();
++			VDBG("host on......\n");
++			if (dev->driver->resume) {
++				retval = dev->driver->resume(dev);
++				if (fsm->id) {
++					/* default-b */
++					fsl_otg_drv_vbus(1);
++					/* Workaround: b_host can't driver
++					 * vbus, but PP in PORTSC needs to
++					 * be 1 for host to work.
++					 * So we set drv_vbus bit in
++					 * transceiver to 0 thru ULPI. */
++					write_ulpi(0x0c, 0x20);
++				}
++			}
++
++			otg_dev->host_working = 1;
++		}
++	} else {
++		/* stop fsl usb host controller */
++		if (!otg_dev->host_working)
++			goto end;
++		else {
++			VDBG("host off......\n");
++			if (dev && dev->driver) {
++				retval = dev->driver->suspend(dev, PMSG_SUSPEND);
++				if (fsm->id)
++					/* default-b */
++					fsl_otg_drv_vbus(0);
++			}
++			otg_dev->host_working = 0;
++		}
++	}
++end:
++	return retval;
++}
++
++/*
++ * Call suspend and resume function in udc driver
++ * to stop and start udc driver.
++ */
++int fsl_otg_start_gadget(struct otg_fsm *fsm, int on)
++{
++	struct otg_transceiver *xceiv = fsm->transceiver;
++	struct device *dev;
++
++	VDBG("DDD fsm=%p  xceiv=%p\n", fsm, xceiv);
++	if (!xceiv->gadget || !xceiv->gadget->dev.parent)
++		return -ENODEV;
++
++	VDBG("DDD xceiv=%p  xceiv->gadget=%p  parent=%p\n", xceiv, xceiv->gadget,
++		xceiv->gadget->dev.parent);
++
++	VDBG("gadget %s\n", on ? "on" : "off");
++	/* DDD  dump_state("starting gadget", fsm); */
++
++	dev = xceiv->gadget->dev.parent;
++
++	if (on)
++		dev->driver->resume(dev);
++	else
++		dev->driver->suspend(dev, PMSG_SUSPEND);
++
++	return 0;
++}
++
++static void fsl_otg_enable(struct otg_transceiver *otg_p)
++{
++	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
++	struct otg_fsm *fsm = &(otg_dev)->fsm;
++	u32 otg_sc;
++
++	/* DDD VDBG(""); */
++	/* enable OTG interrupt */
++	otg_sc = fsl_readl(&usb_dr_regs->otgsc);
++	otg_sc |= OTGSC_INTERRUPT_ENABLE_BITS_MASK;
++	otg_sc &= ~OTGSC_IE_1ms_TIMER;
++	otg_sc &= ~OTGSC_CTRL_VBUS_DISCHARGE;
++	otg_sc |= OTGSC_IE_USB_ID;	/* DDD added this */
++	fsl_writel(otg_sc, &usb_dr_regs->otgsc);
++
++	fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
++
++	if (fsm->id) {
++		otg_p->state = OTG_STATE_UNDEFINED;
++	} else {
++		otg_p->state = OTG_STATE_A_IDLE;
++	}
++
++	otg_p->default_a = (fsm->id == 0);
++	otg_p->host->is_b_host = fsm->id;
++	otg_p->gadget->is_a_peripheral = !fsm->id;
++
++	fsm->a_vbus_vld = 1;
++
++	fsm->b_sess_vld = (otg_sc & OTGSC_STS_B_SESSION_VALID) ? 1 : 0;
++	fsm->a_sess_vld = (otg_sc & OTGSC_STS_A_SESSION_VALID) ? 1 : 0;
++	fsm->b_sess_end = (otg_sc & OTGSC_STS_B_SESSION_END) ? 1 : 0;
++}
++
++/*
++ * Called by initialization code of host driver.  Register host controller
++ * to the OTG.  Suspend host for OTG role detection.
++ */
++static int fsl_otg_set_host(struct otg_transceiver *otg_p, struct usb_bus *host)
++{
++#if 0 // DDD beta-final
++	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
++	struct device *dev = host->controller;
++
++	if (!otg_p || otg_dev != fsl_otg_dev)
++		return -ENODEV;
++
++	otg_p->host = host;
++	otg_p->host->is_b_host = otg_dev->fsm.id;
++
++	otg_dev->fsm.a_bus_drop = 0;
++	otg_dev->fsm.a_bus_req = 1;
++
++	otg_p->host->otg_port = fsl_otg_initdata.otg_port;
++
++	if (dev && dev->driver) {
++		VDBG("suspending host\n");
++		dev->driver->suspend(dev, PMSG_SUSPEND);
++		otg_dev->host_working = 0;
++		VDBG("back\n");
++	}
++
++
++	/* dump_state("set_host running statemachine", &otg_dev->fsm); DDD */
++	otg_statemachine(&otg_dev->fsm);
++
++	return 0;
++#else
++	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
++
++	if (!otg_p || otg_dev != fsl_otg_dev)
++		return -ENODEV;
++
++	otg_p->host = host;
++
++	otg_dev->fsm.a_bus_drop = 0;
++	otg_dev->fsm.a_bus_req = 1;
++
++	if (host) {
++		VDBG("host off......\n");
++
++		otg_p->host->otg_port = fsl_otg_initdata.otg_port;
++		otg_p->host->is_b_host = otg_dev->fsm.id;
++		/* must leave time for khubd to finish its thing
++		 * before yanking the host driver out from under it,
++		 * so suspend the host after a short delay.
++		 */
++		otg_dev->host_working = 1;
++		schedule_delayed_work(&otg_dev->otg_event, 100);
++		return 0;
++	} else {		/* host driver going away */
++
++		if (!(le32_to_cpu(otg_dev->dr_mem_map->otgsc) &
++		      OTGSC_STS_USB_ID)) {
++			/* Mini-A cable connected */
++			struct otg_fsm *fsm = &otg_dev->fsm;
++
++			otg_p->state = OTG_STATE_UNDEFINED;
++			fsm->protocol = PROTO_UNDEF;
++		}
++	}
++
++	otg_dev->host_working = 0;
++
++	otg_statemachine(&otg_dev->fsm);
++
++	return 0;
++#endif
++}
++
++/* Called by initialization code of udc.  Register udc to OTG.*/
++static int fsl_otg_set_peripheral(struct otg_transceiver *otg_p,
++				  struct usb_gadget *gadget)
++{
++	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
++
++	VDBG("\n");
++
++	if (!otg_p || otg_dev != fsl_otg_dev)
++		return -ENODEV;
++
++	if (!gadget) {
++		if (!otg_dev->otg.default_a)
++			otg_p->gadget->ops->vbus_draw(otg_p->gadget, 0);
++		usb_gadget_vbus_disconnect(otg_dev->otg.gadget);
++		otg_dev->otg.gadget = 0;
++		otg_dev->fsm.b_bus_req = 0;
++		otg_statemachine(&otg_dev->fsm);
++		return 0;
++	}
++
++	otg_p->gadget = gadget;
++	otg_p->gadget->is_a_peripheral = !otg_dev->fsm.id;
++
++	otg_dev->fsm.b_bus_req = 1;
++
++#if 0 /* DDD uClinux */
++	if (otg_p->host) {
++		fsl_otg_enable(otg_p);
++		otg_statemachine(&otg_dev->fsm);
++	}
++#endif
++	/* start the gadget right away if the ID pin says Mini-B */
++	DBG("ID pin=%d\n", otg_dev->fsm.id);
++	if (otg_dev->fsm.id == 1) {
++		fsl_otg_start_host(&otg_dev->fsm, 0);
++		fsl_otg_drv_vbus(0);
++		fsl_otg_start_gadget(&otg_dev->fsm, 1);
++	}
++
++	return 0;
++}
++
++/* Set OTG port power, only for B-device */
++static int fsl_otg_set_power(struct otg_transceiver *otg_p, unsigned mA)
++{
++	if (!fsl_otg_dev)
++		return -ENODEV;
++	if (otg_p->state == OTG_STATE_B_PERIPHERAL)
++		printk(KERN_DEBUG "FSL OTG:Draw %d mA\n", mA);
++
++	return 0;
++}
++
++/* Delayed pin detect interrupt processing.
++ *
++ * When the Mini-A cable is disconnected from the board,
++ * the pin-detect interrupt happens before the disconnnect
++ * interrupts for the connected device(s).  In order to
++ * process the disconnect interrupt(s) prior to switching
++ * roles, the pin-detect interrupts are delayed, and handled
++ * by this routine.
++ */
++static void fsl_otg_event(struct work_struct *work)
++{
++	struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work);
++	struct otg_fsm *fsm = &og->fsm;
++
++	VDBG("DDD fsm->id=%d\n", fsm->id);
++	if (fsm->id) {		/* switch to gadget */
++		fsl_otg_start_host(fsm, 0);
++		fsl_otg_drv_vbus(0);
++		fsl_otg_start_gadget(fsm, 1);
++	}
++}
++
++/* B-device start SRP */
++static int fsl_otg_start_srp(struct otg_transceiver *otg_p)
++{
++	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
++
++	if (!otg_p || otg_dev != fsl_otg_dev
++	    || otg_p->state != OTG_STATE_B_IDLE)
++		return -ENODEV;
++
++	otg_dev->fsm.b_bus_req = 1;
++	otg_statemachine(&otg_dev->fsm);
++
++	return 0;
++}
++
++/* A_host suspend will call this function to start hnp */
++static int fsl_otg_start_hnp(struct otg_transceiver *otg_p)
++{
++	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
++
++	if (!otg_p || otg_dev != fsl_otg_dev)
++		return -ENODEV;
++
++	VDBG("start_hnp.............\n");
++	/* clear a_bus_req to enter a_suspend state */
++	otg_dev->fsm.a_bus_req = 0;
++	otg_statemachine(&otg_dev->fsm);
++
++	return 0;
++}
++
++/*
++ * Interrupt handler.  OTG/host/peripheral share the same int line.
++ * OTG driver clears OTGSC interrupts and leaves USB interrupts
++ * intact.  It needs to have knowledge of some USB interrupts
++ * such as port change.
++ */
++irqreturn_t fsl_otg_isr(int irq, void *dev_id)
++{
++	struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm;
++	struct otg_transceiver *otg = &((struct fsl_otg *)dev_id)->otg;
++	u32 otg_int_src, otg_sc;
++
++	otg_sc = fsl_readl(&usb_dr_regs->otgsc);
++	otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8);
++
++	/* Only clear otg interrupts */
++	fsl_writel(otg_sc, &usb_dr_regs->otgsc);
++
++	/*FIXME: ID change not generate when init to 0 */
++	fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
++	otg->default_a = (fsm->id == 0);
++
++	/* process OTG interrupts */
++	if (otg_int_src) {
++		VDBG("\nOTG irq 0x%08x\n", otg_int_src);
++
++		if (otg_int_src & OTGSC_INTSTS_USB_ID) {
++			fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
++			otg->default_a = (fsm->id == 0);
++			/* clear conn information */
++			if (fsm->id)
++				fsm->b_conn = 0;
++			else
++				fsm->a_conn = 0;
++
++			if (otg->host)
++				otg->host->is_b_host = fsm->id;
++			if (otg->gadget)
++				otg->gadget->is_a_peripheral = !fsm->id;
++			VDBG("ID int (ID is %d)\n", fsm->id);
++
++			if (fsm->id) {	/* switch to gadget */
++				schedule_delayed_work(&((struct fsl_otg *)
++							dev_id)->otg_event, 25);
++			} else {	/* switch to host */
++				cancel_delayed_work(&
++						    ((struct fsl_otg *)dev_id)->
++						    otg_event);
++				fsl_otg_start_gadget(fsm, 0);
++				fsl_otg_drv_vbus(1);
++				fsl_otg_start_host(fsm, 1);
++			}
++
++			return IRQ_HANDLED;
++		}
++	}
++
++	return IRQ_NONE;
++}
++
++
++#if 0 // DDD feta-final
++irqreturn_t foo_fsl_otg_isr(int irq, void *dev_id)
++{
++	struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm;
++	struct otg_transceiver *otg = &((struct fsl_otg *)dev_id)->otg;
++	u32 otg_int_src, usb_int_src, otg_sc;
++	int trigger = 0;
++	int tmp;
++
++	usb_int_src = fsl_readl(&usb_dr_regs->usbsts);
++	otg_sc = fsl_readl(&usb_dr_regs->otgsc);
++	otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8);
++
++	/* Only clear otg interrupts */
++	fsl_writel(otg_sc, &usb_dr_regs->otgsc);
++
++	/*FIXME: ID change not generate when init to 0 */
++	/* process OTG interrupts */
++	if (otg_int_src) {
++		VDBG("\nOTG irq 0x%08x\n", otg_int_src);
++		if (otg_int_src & OTGSC_INTSTS_1MS_TIMER)
++			trigger = fsl_otg_tick_timer();
++
++		if (otg_int_src & OTGSC_INTSTS_USB_ID) {
++			fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
++			otg->default_a = (fsm->id == 0);
++			if (otg->host)
++				otg->host->is_b_host = fsm->id;
++			if (otg->gadget)
++				otg->gadget->is_a_peripheral = !fsm->id;
++			VDBG("IRQ=ID now=%d\n", fsm->id);
++
++			if (fsm->id) {	/* switch to gadget */
++				schedule_delayed_work(&((struct fsl_otg *)
++							dev_id)->otg_event, 25);
++			} else {	/* switch to host */
++				cancel_delayed_work(&
++						    ((struct fsl_otg *)dev_id)->
++						    otg_event);
++				fsl_otg_start_gadget(fsm, 0);
++				fsl_otg_drv_vbus(1);
++				fsl_otg_start_host(fsm, 1);
++			}
++
++			return IRQ_HANDLED;
++		}
++		if (otg_int_src & OTGSC_INTSTS_DATA_PULSE) {
++			fsm->a_srp_det = 1;
++			trigger = 1;
++			VDBG("!!!!Data pulse int\n");
++		}
++		if (otg_int_src & OTGSC_INTSTS_A_SESSION_VALID) {
++			fsm->a_sess_vld =
++			    (otg_sc & OTGSC_STS_A_SESSION_VALID) ? 1 : 0;
++			/* detect VBUS pulsing */
++			if ((fsm->transceiver->state == OTG_STATE_A_IDLE)
++			    && fsm->a_sess_vld)
++				fsm->a_srp_det = 1;
++			trigger = 1;
++			VDBG("!!!a_sess_vld int state=%d\n", fsm->a_sess_vld);
++		}
++		if (otg_int_src & OTGSC_INTSTS_A_VBUS_VALID) {
++			fsm->a_vbus_vld = !!(otg_sc & OTGSC_STS_A_VBUS_VALID);
++			trigger = 1;
++			VDBG("!!!a_vbus_vld int state=%d\n", fsm->a_vbus_vld);
++
++#if 1
++		if ((fsm->a_vbus_vld == 0) && (fsm->id == 0)) {
++			if (fsm->transceiver->state != OTG_STATE_A_WAIT_VFALL)
++				/* Warning insted of transfer to Error state. */
++				printk(KERN_WARNING "ulpi: The USB Device is "
++				       "sinking too much current!!\n");
++			fsm->a_vbus_vld = 1;
++		}
++#endif
++
++
++		}
++		if (otg_int_src & OTGSC_INTSTS_B_SESSION_VALID) {
++			fsm->b_sess_vld =
++			    (otg_sc & OTGSC_STS_B_SESSION_VALID) ? 1 : 0;
++			trigger = 1;
++			/* SRP done */
++			if ((fsl_otg_dev->otg.state == OTG_STATE_B_SRP_INIT) &&
++			    fsm->b_sess_vld && srp_wait_done)
++				fsm->b_srp_done = 1;
++			VDBG("!!!!b_sess_vld int state=%d\n", fsm->b_sess_vld);
++		}
++		if (otg_int_src & OTGSC_INTSTS_B_SESSION_END) {
++			fsm->b_sess_end =
++			    (otg_sc & OTGSC_STS_B_SESSION_END) ? 1 : 0;
++			trigger = 1;
++			VDBG("!!!!b_sess_end int state=%d\n", fsm->b_sess_end);
++		}
++	}
++
++	/* process USB interrupts */
++	if ((usb_int_src & USB_STS_PORT_CHANGE)
++	    && (fsm->protocol == PROTO_HOST)) {
++		VDBG("\nUSB irq A 0x%08x\n", usb_int_src);
++		/* Device resume do not generate statemachine change */
++		if (fsl_readl(&usb_dr_regs->portsc1) &
++		    PORTSCX_PORT_FORCE_RESUME) {
++			if (otg->default_a) {
++				fsm->b_bus_resume = 1;
++				trigger = 1;
++			} else {
++				fsm->a_bus_resume = 1;
++				trigger = 1;
++			}
++		}
++
++		tmp = (fsl_readl(&usb_dr_regs->portsc1) &
++		       PORTSCX_CURRENT_CONNECT_STATUS) ? 1 : 0;
++		if (otg->default_a && (fsm->b_conn != tmp)) {
++			fsm->b_conn = tmp;
++			trigger = 1;
++		} else if (!otg->default_a && (fsm->a_conn != tmp)) {
++			fsm->a_conn = tmp;
++			trigger = 1;
++		}
++	}
++	/* Workaround: sometimes CSC bit will lost.  We change to
++	 * polling CCS bit for connect change */
++	if (fsm->protocol == PROTO_GADGET) {
++		if (usb_int_src & USB_STS_SUSPEND) {
++			VDBG("\nUSB irq B 0x%08x\n", usb_int_src);
++			VDBG("peripheral detected suspend\n");
++			if (otg->default_a)
++				/* A-device detects B suspend */
++				fsm->b_bus_suspend = 1;
++			else
++				/* B-device detects A suspend */
++				fsm->a_bus_suspend = 1;
++			trigger = 1;
++		} else if (usb_int_src & USB_STS_PORT_CHANGE) {
++			VDBG("\nUSB irq C 0x%08x\n", usb_int_src);
++			VDBG("peripheral resumed\n");
++			if (otg->default_a)
++				fsm->b_bus_suspend = 0;
++			else
++				fsm->a_bus_suspend = 0;
++			trigger = 1;
++		}
++	}
++
++	/* Invoke statemachine until state is stable */
++	while (trigger) {
++		trigger = otg_statemachine(fsm);
++	}
++
++	return IRQ_HANDLED;
++}
++#endif
++
++
++static struct otg_fsm_ops fsl_otg_ops = {
++	.chrg_vbus = fsl_otg_chrg_vbus,
++	.drv_vbus = fsl_otg_drv_vbus,
++	.loc_conn = fsl_otg_loc_conn,
++	.loc_sof = fsl_otg_loc_sof,
++	.start_pulse = fsl_otg_start_pulse,
++
++	.add_timer = fsl_otg_add_timer,
++	.del_timer = fsl_otg_del_timer,
++
++	.start_host = fsl_otg_start_host,
++	.start_gadget = fsl_otg_start_gadget,
++};
++
++/* Initialize the global variable fsl_otg_dev and request IRQ for OTG */
++int fsl_otg_cfg(struct platform_device *pdev)
++{
++	int status;
++	struct fsl_otg *fsl_otg_tc;
++	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
++	struct resource *res;
++
++	DBG("\n");
++
++	if (fsl_otg_dev)
++		return 0;
++
++	/* allocate space to fsl otg device */
++	fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL);
++	if (!fsl_otg_tc)
++		return -ENODEV;
++
++#if 1 // DDD
++	if (pdata->regs) {
++		fsl_otg_tc->dr_mem_map = pdata->regs;
++	} else {
++		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++		if (!res) {
++			dev_err(&pdev->dev, "no register addr.\n");
++			return -ENODEV;
++		}
++
++		printk("DDD %s(): rsrc_start=0x%x  rsrc_len=0x%x\n",
++		     __FUNCTION__, res->start, res->end - res->start + 1);
++
++		if (!request_mem_region(res->start, res->end - res->start + 1,
++					"OTG")) {
++			dev_dbg(&pdev->dev, "request_mem_region failed\n");
++			return -EBUSY;
++		}
++		fsl_otg_tc->dr_mem_map = ioremap(res->start,
++						 res->end - res->start + 1);
++	}
++	DBG("set dr_mem_map to 0x%p\n", fsl_otg_tc->dr_mem_map);
++
++#endif 
++	INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event);
++
++	INIT_LIST_HEAD(&active_timers);
++	fsl_otg_init_timers(&fsl_otg_tc->fsm);
++
++	/* Set OTG state machine operations */
++	fsl_otg_tc->fsm.ops = &fsl_otg_ops;
++
++#if 1 /* DDD */
++	/* record initial state of ID pin */
++	fsl_otg_tc->fsm.id = (fsl_otg_tc->dr_mem_map->otgsc & OTGSC_STS_USB_ID)
++	    ? 1 : 0;
++	DBG("initial ID pin=%d\n", fsl_otg_tc->fsm.id);
++#endif
++	/* initialize the otg structure */
++	fsl_otg_tc->otg.label = DRIVER_DESC;
++	fsl_otg_tc->otg.set_host = fsl_otg_set_host;
++	fsl_otg_tc->otg.set_peripheral = fsl_otg_set_peripheral;
++	fsl_otg_tc->otg.set_power = fsl_otg_set_power;
++	fsl_otg_tc->otg.start_hnp = fsl_otg_start_hnp;
++	fsl_otg_tc->otg.start_srp = fsl_otg_start_srp;
++
++	fsl_otg_dev = fsl_otg_tc;
++
++	/* Store the otg transceiver */
++	status = otg_set_transceiver(&fsl_otg_tc->otg);
++	if (status) {
++		printk(KERN_WARNING ": unable to register OTG transceiver.\n");
++		return status;
++	}
++
++	return 0;
++}
++
++/* OTG Initialization*/
++int usb_otg_start(struct platform_device *pdev)
++{
++	struct fsl_otg *p_otg;
++	struct otg_transceiver *otg_trans = otg_get_transceiver();
++	struct otg_fsm *fsm;
++	int status;
++	u32 temp;
++	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
++	int timeout;
++
++	DBG("\n");
++
++	p_otg = container_of(otg_trans, struct fsl_otg, otg);
++	fsm = &p_otg->fsm;
++
++	/* Initialize the state machine structure with default values */
++	SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED);
++	fsm->transceiver = &p_otg->otg;
++
++	usb_dr_regs = p_otg->dr_mem_map;
++	DBG("set usb_dr_regs to 0x%p\n", usb_dr_regs);
++
++	/* request irq */
++	p_otg->irq = platform_get_irq(pdev, 0);
++	status = request_irq(p_otg->irq, fsl_otg_isr,
++				IRQF_SHARED, driver_name, p_otg);
++	if (status) {
++		dev_dbg(p_otg->otg.dev, "can't get IRQ %d, error %d\n",
++			p_otg->irq, status);
++		kfree(p_otg);
++		return status;
++	}
++
++
++	/* stop the controller */
++	temp = fsl_readl(&usb_dr_regs->usbcmd) & ~USB_CMD_RUN_STOP;
++	fsl_writel(temp, &usb_dr_regs->usbcmd);
++
++	/* reset the controller */
++	temp = fsl_readl(&usb_dr_regs->usbcmd);
++	temp |= USB_CMD_CTRL_RESET;
++	fsl_writel(temp, &usb_dr_regs->usbcmd);
++
++	/* wait reset completed */
++	timeout = 500;
++	while (timeout-- &&
++		fsl_readl(&usb_dr_regs->usbcmd) & USB_CMD_CTRL_RESET)
++		udelay(1);
++	if (timeout <= 0)
++		ERR("%s - USBCMD_RST never clear. Timeout is %d \n",
++			__FUNCTION__, timeout);
++
++	/* configure the VBUSHS as IDLE(both host and device) */
++#if 0
++	/* DDD really have to check into setting the following */
++	fsl_writel(USB_MODE_STREAM_DISABLE, &usb_dr_regs->usbmode);
++#else
++	temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USBMODE_ES : 0);
++	fsl_writel(temp, &usb_dr_regs->usbmode);
++#endif
++
++	/* configure PHY interface */
++	temp = fsl_readl(&usb_dr_regs->portsc1);
++	temp &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PTW_8BIT);
++
++	/* DDD wrong xcvr setting stuff follows */
++	temp |= PORTSCX_PTS_ULPI;
++	fsl_writel(temp, &usb_dr_regs->portsc1);
++
++
++	/* disable all interrupt and clear all OTGSC status */
++	temp = fsl_readl(&usb_dr_regs->otgsc);
++	temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK;
++#if 0 // DDD
++	/* DDD only want ID int
++	 * temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE;
++	 */
++	temp |= OTGSC_IE_USB_ID;	/* DDD added this */
++	temp &= ~OTGSC_IE_1ms_TIMER;	/* DDD added this */
++#else
++	temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE;
++#endif
++	fsl_writel(temp, &usb_dr_regs->otgsc);
++
++	fsl_otg_drv_vbus(0);
++
++#if 0 // DDD beta-final
++	temp = fsl_readl(&usb_dr_regs->otgsc);
++	temp |= OTGSC_IE_A_SESSION_VALID;
++	fsl_writel(temp, &usb_dr_regs->otgsc);
++#else
++	/*
++	 * The identification (id) input is FALSE when a Mini-A plug is inserted
++	 * in the devices Mini-AB receptacle. Otherwise, this input is TRUE.
++	 * Also: record initial state of ID pin
++	 */
++	if (fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_USB_ID) {
++		p_otg->otg.state = OTG_STATE_UNDEFINED;
++		p_otg->fsm.id = 1;
++	} else {
++		p_otg->otg.state = OTG_STATE_A_IDLE;
++		p_otg->fsm.id = 0;
++	}
++
++	DBG("initial ID pin=%d\n", p_otg->fsm.id);
++
++	/* enable OTG ID pin interrupt */
++	temp = fsl_readl(&usb_dr_regs->otgsc);
++	temp |= OTGSC_IE_USB_ID;
++	temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_IE_1ms_TIMER);
++	fsl_writel(temp, &usb_dr_regs->otgsc);
++#endif
++
++	return 0;
++}
++
++/* Initialize board specific registers,PIB board,clock and pin multiplexing */
++static int board_init(struct platform_device *pdev)
++{
++	struct fsl_usb2_platform_data *pdata;
++	pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
++
++	/*
++	 * do platform specific init: check the clock, grab/config pins, etc.
++	 */
++	if (pdata->platform_init(pdev) != 0)
++		return -EINVAL;
++
++	return 0;
++}
++
++/*-------------------------------------------------------------------------
++		PROC File System Support
++-------------------------------------------------------------------------*/
++#ifdef CONFIG_USB_OTG_DEBUG_FILES
++
++#include <linux/seq_file.h>
++
++static const char proc_filename[] = "driver/fsl_usb2_otg";
++
++static int otg_proc_read(char *page, char **start, off_t off, int count,
++			 int *eof, void *_dev)
++{
++	struct otg_fsm *fsm = &fsl_otg_dev->fsm;
++	char *buf = page;
++	char *next = buf;
++	unsigned size = count;
++	unsigned long flags;
++	int t;
++	u32 tmp_reg;
++
++	if (off != 0)
++		return 0;
++
++	spin_lock_irqsave(&fsm->lock, flags);
++
++	/* ------basic driver infomation ---- */
++	t = scnprintf(next, size,
++		      DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n",
++		      DRIVER_VERSION);
++	size -= t;
++	next += t;
++
++	/* ------ Registers ----- */
++	/* tmp_reg = le32_to_cpu(usb_dr_regs->otgsc); */
++	tmp_reg = fsl_readl(&usb_dr_regs->otgsc);
++	t = scnprintf(next, size, "OTGSC reg: 0x%08x\n", tmp_reg);
++	size -= t;
++	next += t;
++
++	/* tmp_reg = le32_to_cpu(usb_dr_regs->portsc); */
++	tmp_reg = fsl_readl(&usb_dr_regs->portsc1);
++	t = scnprintf(next, size, "PORTSC reg: 0x%08x\n", tmp_reg);
++	size -= t;
++	next += t;
++
++	/* tmp_reg = le32_to_cpu(usb_dr_regs->usbmode); */
++	tmp_reg = fsl_readl(&usb_dr_regs->usbmode);
++	t = scnprintf(next, size, "USBMODE reg: 0x%08x\n", tmp_reg);
++	size -= t;
++	next += t;
++
++	/* tmp_reg = le32_to_cpu(usb_dr_regs->usbcmd); */
++	tmp_reg = fsl_readl(&usb_dr_regs->usbcmd);
++	t = scnprintf(next, size, "USBCMD reg: 0x%08x\n", tmp_reg);
++	size -= t;
++	next += t;
++
++	/* tmp_reg = le32_to_cpu(usb_dr_regs->usbsts); */
++	tmp_reg = fsl_readl(&usb_dr_regs->usbsts);
++	t = scnprintf(next, size, "USBSTS reg: 0x%08x\n", tmp_reg);
++	size -= t;
++	next += t;
++
++	/* ------ State ----- */
++	t = scnprintf(next, size, "FSM protocol=%d %s\n", fsm->protocol,
++		fsm->protocol ?
++		(fsm->protocol == PROTO_HOST ? "Host" : "Gadget")
++		: "None");
++	size -= t;
++	next += t;
++
++	t = scnprintf(next, size,
++		      "OTG state: %s\n\n",
++		      state_string(fsl_otg_dev->otg.state));
++	size -= t;
++	next += t;
++
++	/* ------ State Machine Variables ----- */
++	t = scnprintf(next, size, "a_bus_req: %d\n", fsm->a_bus_req);
++	size -= t;
++	next += t;
++
++	t = scnprintf(next, size, "b_bus_req: %d\n", fsm->b_bus_req);
++	size -= t;
++	next += t;
++
++	t = scnprintf(next, size, "a_bus_resume: %d\n", fsm->a_bus_resume);
++	size -= t;
++	next += t;
++
++	t = scnprintf(next, size, "a_bus_suspend: %d\n", fsm->a_bus_suspend);
++	size -= t;
++	next += t;
++
++	t = scnprintf(next, size, "a_conn: %d\n", fsm->a_conn);
++	size -= t;
++	next += t;
++
++	t = scnprintf(next, size, "a_sess_vld: %d\n", fsm->a_sess_vld);
++	size -= t;
++	next += t;
++
++	t = scnprintf(next, size, "a_srp_det: %d\n", fsm->a_srp_det);
++	size -= t;
++	next += t;
++
++	t = scnprintf(next, size, "a_vbus_vld: %d\n", fsm->a_vbus_vld);
++	size -= t;
++	next += t;
++
++	t = scnprintf(next, size, "b_bus_resume: %d\n", fsm->b_bus_resume);
++	size -= t;
++	next += t;
++
++	t = scnprintf(next, size, "b_bus_suspend: %d\n", fsm->b_bus_suspend);
++	size -= t;
++	next += t;
++
++	t = scnprintf(next, size, "b_conn: %d\n", fsm->b_conn);
++	size -= t;
++	next += t;
++
++	t = scnprintf(next, size, "b_se0_srp: %d\n", fsm->b_se0_srp);
++	size -= t;
++	next += t;
++
++	t = scnprintf(next, size, "b_sess_end: %d\n", fsm->b_sess_end);
++	size -= t;
++	next += t;
++
++	t = scnprintf(next, size, "b_sess_vld: %d\n", fsm->b_sess_vld);
++	size -= t;
++	next += t;
++
++	t = scnprintf(next, size, "id: %d\n", fsm->id);
++	size -= t;
++	next += t;
++
++	spin_unlock_irqrestore(&fsm->lock, flags);
++
++	*eof = 1;
++	return count - size;
++}
++
++#define create_proc_file()	create_proc_read_entry(proc_filename, \
++				0, NULL, otg_proc_read, NULL)
++
++#define remove_proc_file()	remove_proc_entry(proc_filename, NULL)
++
++#else				/* !CONFIG_USB_OTG_DEBUG_FILES */
++
++#define create_proc_file()	do {} while (0)
++#define remove_proc_file()	do {} while (0)
++
++#endif				/*CONFIG_USB_OTG_DEBUG_FILES */
++
++/*----------------------------------------------------------*/
++/* Char driver interface to control some OTG input */
++
++/*
++ * This function handle some ioctl command,such as get otg
++ * status and set host suspend
++ */
++static int fsl_otg_ioctl(struct inode *inode, struct file *file,
++			 unsigned int cmd, unsigned long arg)
++{
++	u32 retval = 0;
++
++	switch (cmd) {
++	case GET_OTG_STATUS:
++		retval = fsl_otg_dev->host_working;
++		break;
++
++	case SET_A_SUSPEND_REQ:
++		fsl_otg_dev->fsm.a_suspend_req = arg;
++		break;
++
++	case SET_A_BUS_DROP:
++		fsl_otg_dev->fsm.a_bus_drop = arg;
++		break;
++
++	case SET_A_BUS_REQ:
++		fsl_otg_dev->fsm.a_bus_req = arg;
++		break;
++
++	case SET_B_BUS_REQ:
++		fsl_otg_dev->fsm.b_bus_req = arg;
++		break;
++
++	default:
++		break;
++	}
++
++	otg_statemachine(&fsl_otg_dev->fsm);
++
++	return retval;
++}
++
++static int fsl_otg_open(struct inode *inode, struct file *file)
++{
++
++	return 0;
++}
++
++static int fsl_otg_release(struct inode *inode, struct file *file)
++{
++
++	return 0;
++}
++
++static struct file_operations otg_fops = {
++	.owner = THIS_MODULE,
++	.llseek = NULL,
++	.read = NULL,
++	.write = NULL,
++	.ioctl = fsl_otg_ioctl,
++	.open = fsl_otg_open,
++	.release = fsl_otg_release,
++};
++
++static int __init fsl_otg_probe(struct platform_device *pdev)
++{
++	int status;
++	struct fsl_usb2_platform_data *pdata;
++
++	DBG("pdev=0x%p\n", pdev);
++
++	if (!pdev)
++		return -ENODEV;
++
++	if (!pdev->dev.platform_data)
++		return -ENOMEM;
++
++	pdata = pdev->dev.platform_data;
++#if 1 // DDD do this elsewhere
++	/* Initialize the clock, multiplexing pin and PHY interface */
++	board_init(pdev);
++#endif
++
++	/* configure the OTG */
++	status = fsl_otg_cfg(pdev);
++	if (status) {
++		printk(KERN_INFO "Couldn't init OTG module\n");
++		return -status;
++	}
++
++	/* start OTG */
++	status = usb_otg_start(pdev);
++
++	if (register_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME, &otg_fops)) {
++		printk(KERN_WARNING FSL_OTG_NAME
++		       ": unable to register FSL OTG device\n");
++		return -EIO;
++	}
++
++	create_proc_file();
++	return status;
++}
++
++static int fsl_otg_remove(struct platform_device *pdev)
++{
++	u32 ie;
++	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
++	unsigned long flags;
++
++	DBG("pdev=0x%p  pdata=0x%p\n", pdev, pdata);
++
++	otg_set_transceiver(NULL);
++
++	/* disable and clear OTGSC interrupts */
++	spin_lock_irqsave(&usb_dr_regs_lock, flags);
++	ie = fsl_readl(&usb_dr_regs->otgsc);
++	ie &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK;
++	ie |= OTGSC_INTERRUPT_STATUS_BITS_MASK;
++	fsl_writel(ie, &usb_dr_regs->otgsc);
++	spin_unlock_irqrestore(&usb_dr_regs_lock, flags);
++
++	free_irq(fsl_otg_dev->irq, fsl_otg_dev);
++
++	kfree(fsl_otg_dev);
++
++	remove_proc_file();
++
++	unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME);
++
++	if (pdata->platform_uninit)
++		pdata->platform_uninit(pdev);
++
++	fsl_otg_dev = NULL;
++	return 0;
++}
++
++struct platform_driver fsl_otg_driver = {
++	.probe = fsl_otg_probe,
++	.remove = fsl_otg_remove,
++	.driver = {
++		.name  = driver_name,
++		.owner = THIS_MODULE,
++	},
++};
++
++/*-------------------------------------------------------------------------*/
++
++static int __init fsl_usb_otg_init(void)
++{
++	printk(KERN_INFO DRIVER_DESC " loaded, %s\n", DRIVER_VERSION);
++	return platform_driver_register(&fsl_otg_driver);
++}
++
++static void __exit fsl_usb_otg_exit(void)
++{
++	platform_driver_unregister(&fsl_otg_driver);
++}
++
++module_init(fsl_usb_otg_init);
++module_exit(fsl_usb_otg_exit);
++
++MODULE_DESCRIPTION(DRIVER_INFO);
++MODULE_AUTHOR(DRIVER_AUTHOR);
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/drivers/usb/otg/fsl_otg.h
+@@ -0,0 +1,139 @@
++/*
++ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++#ifndef FSL_OTG_H
++#define FSL_OTG_H
++#include <linux/usb/otg.h>
++#include "otg_fsm.h"
++#include <linux/ioctl.h>
++
++#define ERR(format, arg...) \
++printk(KERN_ERR "%s:%s: " format "\n" , __FILE__,  __FUNCTION__ , ## arg)
++
++/*
++ *  A-DEVICE timing  constants
++ */
++
++/* Wait for VBUS Rise  */
++#define TA_WAIT_VRISE	(100)	/* a_wait_vrise 100 ms, section: 6.6.5.1 */
++
++/* Wait for B-Connect */
++#define TA_WAIT_BCON	(10000)	/* a_wait_bcon > 1 sec, section: 6.6.5.2
++				 * This is only used to get out of
++				 * OTG_STATE_A_WAIT_BCON state if there was
++				 * no connection for these many milliseconds
++				 */
++
++/* A-Idle to B-Disconnect */
++/* It is necessary for this timer to be more than 750 ms because of a bug in OPT
++ * test 5.4 in which B OPT disconnects after 750 ms instead of 75ms as stated
++ * in the test description
++ */
++#define TA_AIDL_BDIS	(5000)	/* a_suspend minimum 200 ms, section: 6.6.5.3 */
++
++/* B-Idle to A-Disconnect */
++#define TA_BIDL_ADIS	(12)	/* 3 to 200 ms */
++
++/* B-device timing constants */
++
++/* Data-Line Pulse Time*/
++#define TB_DATA_PLS	(10)	/* b_srp_init,continue 5~10ms, section:5.3.3 */
++#define TB_DATA_PLS_MIN	(5)	/* minimum 5 ms */
++#define TB_DATA_PLS_MAX	(10)	/* maximum 10 ms */
++
++/* SRP Initiate Time  */
++#define TB_SRP_INIT	(100)	/* b_srp_init,maximum 100 ms, section:5.3.8 */
++
++/* SRP Fail Time  */
++#define TB_SRP_FAIL	(7000)	/* b_srp_init,Fail time 5~30s, section:6.8.2.2 */
++
++/* SRP result wait time */
++#define TB_SRP_WAIT	(60)
++
++/* VBus time */
++#define TB_VBUS_PLS	(30)	/* time to keep vbus pulsing asserted */
++
++/* Discharge time */
++/* This time should be less than 10ms. It varies from system to system. */
++#define TB_VBUS_DSCHRG	(8)
++
++/* A-SE0 to B-Reset  */
++#define TB_ASE0_BRST	(20)	/* b_wait_acon, mini 3.125 ms,section:6.8.2.4 */
++
++/* A bus suspend timer before we can switch to b_wait_aconn */
++#define TB_A_SUSPEND	(7)
++#define TB_BUS_RESUME	(12)
++
++/* SE0 Time Before SRP */
++#define TB_SE0_SRP	(2)	/* b_idle,minimum 2 ms, section:5.3.2 */
++
++#define SET_OTG_STATE(otg_ptr, newstate)	((otg_ptr)->state = newstate)
++
++
++struct fsl_otg_timer {
++	unsigned long expires;	/* Number of count increase to timeout */
++	unsigned long count;	/* Tick counter */
++	void (*function) (unsigned long);	/* Timeout function */
++	unsigned long data;	/* Data passed to function */
++	struct list_head list;
++};
++
++struct fsl_otg_timer inline *otg_timer_initializer
++    (void (*function) (unsigned long), unsigned long expires,
++     unsigned long data) {
++	struct fsl_otg_timer *timer;
++	timer = kmalloc(sizeof(struct fsl_otg_timer), GFP_KERNEL);
++	if (timer == NULL)
++		return NULL;
++	timer->function = function;
++	timer->expires = expires;
++	timer->data = data;
++	return timer;
++}
++
++struct fsl_otg {
++	struct otg_transceiver otg;
++	struct otg_fsm fsm;
++	struct fsl_usb_device_regs *dr_mem_map;
++	struct delayed_work otg_event;
++
++	/*used for usb host */
++	u8 host_working;
++	u8 on_off;
++
++	int irq;
++};
++
++struct fsl_otg_config {
++	u8 otg_port;
++};
++
++/*For SRP and HNP handle*/
++#define FSL_OTG_MAJOR	66
++#define FSL_OTG_NAME	"fsl-otg"
++/*Command to OTG driver(ioctl)*/
++#define OTG_IOCTL_MAGIC		FSL_OTG_MAJOR
++/*if otg work as host,it should return 1,otherwise it return 0*/
++#define GET_OTG_STATUS		_IOR(OTG_IOCTL_MAGIC, 1, int)
++#define SET_A_SUSPEND_REQ	_IOW(OTG_IOCTL_MAGIC, 2, int)
++#define SET_A_BUS_DROP		_IOW(OTG_IOCTL_MAGIC, 3, int)
++#define SET_A_BUS_REQ		_IOW(OTG_IOCTL_MAGIC, 4, int)
++#define SET_B_BUS_REQ		_IOW(OTG_IOCTL_MAGIC, 5, int)
++#define GET_A_SUSPEND_REQ	_IOR(OTG_IOCTL_MAGIC, 6, int)
++#define GET_A_BUS_DROP		_IOR(OTG_IOCTL_MAGIC, 7, int)
++#define GET_A_BUS_REQ		_IOR(OTG_IOCTL_MAGIC, 8, int)
++#define GET_B_BUS_REQ		_IOR(OTG_IOCTL_MAGIC, 9, int)
++
++
++/********************************************************************/
++#endif
+--- /dev/null
++++ b/drivers/usb/otg/otg_fsm.c
+@@ -0,0 +1,381 @@
++/* OTG Finite State Machine from OTG spec
++ *
++ * Copyright (C) 2007 Freescale Semiconductor, Inc.
++ *
++ * Author: 	Li Yang <LeoLi@freescale.com>
++ * 		Jerry Huang <Chang-Ming.Huang@freescale.com>
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the  GNU General Public License along
++ * with this program; if not, write  to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/usb/otg.h>
++#include <linux/spinlock.h>
++#include <linux/delay.h>
++#include <linux/usb.h>
++#include <linux/usb_gadget.h>
++
++#include "otg_fsm.h"
++
++
++/* Defined by device specific driver, for different timer implementation */
++extern void *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr,
++	*b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_fail_tmr, *a_wait_enum_tmr;
++
++const char *state_string(enum usb_otg_state state)
++{
++	switch (state) {
++	case OTG_STATE_A_IDLE:		return "a_idle";
++	case OTG_STATE_A_WAIT_VRISE:	return "a_wait_vrise";
++	case OTG_STATE_A_WAIT_BCON:	return "a_wait_bcon";
++	case OTG_STATE_A_HOST:		return "a_host";
++	case OTG_STATE_A_SUSPEND:	return "a_suspend";
++	case OTG_STATE_A_PERIPHERAL:	return "a_peripheral";
++	case OTG_STATE_A_WAIT_VFALL:	return "a_wait_vfall";
++	case OTG_STATE_A_VBUS_ERR:	return "a_vbus_err";
++	case OTG_STATE_B_IDLE:		return "b_idle";
++	case OTG_STATE_B_SRP_INIT:	return "b_srp_init";
++	case OTG_STATE_B_PERIPHERAL:	return "b_peripheral";
++	case OTG_STATE_B_WAIT_ACON:	return "b_wait_acon";
++	case OTG_STATE_B_HOST:		return "b_host";
++	default:			return "UNDEFINED";
++	}
++}
++EXPORT_SYMBOL(state_string);
++
++/* Change USB protocol when there is a protocol change */
++static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
++{
++	int ret = 0;
++
++	VDBG("DDD old fsm->protocol= %d; new protocol= %d\n",
++		     fsm->protocol, protocol);
++	if (fsm->protocol != protocol) {
++		VDBG("Changing role fsm->protocol= %d; new protocol= %d\n",
++				fsm->protocol, protocol);
++		/* stop old protocol */
++		if (fsm->protocol == PROTO_HOST)
++			ret = fsm->ops->start_host(fsm, 0);
++		else if (fsm->protocol == PROTO_GADGET)
++			ret = fsm->ops->start_gadget(fsm, 0);
++		if (ret)
++			return ret;
++
++		/* start new protocol */
++		if (protocol == PROTO_HOST)
++			ret = fsm->ops->start_host(fsm, 1);
++		else if (protocol == PROTO_GADGET)
++			ret = fsm->ops->start_gadget(fsm, 1);
++		if (ret)
++			return ret;
++
++		fsm->protocol = protocol;
++		return 0;
++	}
++
++	return 0;
++}
++
++static int state_changed;
++
++/* Called when leaving a state.  Do state clean up jobs here */
++static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
++{
++	switch (old_state) {
++	case OTG_STATE_B_IDLE:
++		otg_del_timer(fsm, fsm->b_se0_srp_tmr);
++		fsm->b_se0_srp = 0;
++		break;
++	case OTG_STATE_B_SRP_INIT:
++		fsm->b_srp_done = 0;
++		break;
++	case OTG_STATE_B_PERIPHERAL:
++		break;
++	case OTG_STATE_B_WAIT_ACON:
++		otg_del_timer(fsm, fsm->b_ase0_brst_tmr);
++		fsm->b_ase0_brst_tmout = 0;
++		break;
++	case OTG_STATE_B_HOST:
++		break;
++	case OTG_STATE_A_IDLE:
++		break;
++	case OTG_STATE_A_WAIT_VRISE:
++		otg_del_timer(fsm, fsm->a_wait_vrise_tmr);
++		fsm->a_wait_vrise_tmout = 0;
++		break;
++	case OTG_STATE_A_WAIT_BCON:
++		otg_del_timer(fsm, fsm->a_wait_bcon_tmr);
++		fsm->a_wait_bcon_tmout = 0;
++		break;
++	case OTG_STATE_A_HOST:
++		otg_del_timer(fsm, fsm->a_wait_enum_tmr);
++		break;
++	case OTG_STATE_A_SUSPEND:
++		otg_del_timer(fsm, fsm->a_aidl_bdis_tmr);
++		fsm->a_aidl_bdis_tmout = 0;
++		fsm->a_suspend_req = 0;
++		fsm->a_bus_req = 1;	/* FIXME */
++		break;
++	case OTG_STATE_A_PERIPHERAL:
++		break;
++	case OTG_STATE_A_WAIT_VFALL:
++		otg_del_timer(fsm, fsm->a_wait_vrise_tmr);
++		break;
++	case OTG_STATE_A_VBUS_ERR:
++		break;
++	default:
++		break;
++	}
++}
++
++/* Called when entering a state */
++static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
++{
++	state_changed = 1;
++	VDBG("State: old=%s new=%s \n",
++		state_string(fsm->transceiver->state), state_string(new_state));
++
++	if (fsm->transceiver->state == new_state)
++		return 0;
++
++	otg_leave_state(fsm, fsm->transceiver->state);
++	switch (new_state) {
++	case OTG_STATE_B_IDLE:
++		otg_drv_vbus(fsm, 0);
++		otg_chrg_vbus(fsm, 0);
++		otg_loc_conn(fsm, 0);
++		otg_loc_sof(fsm, 0);
++		otg_set_protocol(fsm, PROTO_UNDEF);
++		otg_add_timer(fsm, fsm->b_se0_srp_tmr);
++		break;
++	case OTG_STATE_B_SRP_INIT:
++		otg_start_pulse(fsm);
++		otg_loc_sof(fsm, 0);
++		otg_set_protocol(fsm, PROTO_UNDEF);
++		otg_add_timer(fsm, fsm->b_srp_fail_tmr);
++		break;
++	case OTG_STATE_B_PERIPHERAL:
++		otg_chrg_vbus(fsm, 0);
++		otg_loc_conn(fsm, 1);
++		otg_loc_sof(fsm, 0);
++		otg_set_protocol(fsm, PROTO_GADGET);
++		break;
++	case OTG_STATE_B_WAIT_ACON:
++		otg_chrg_vbus(fsm, 0);
++		otg_loc_conn(fsm, 0);
++		otg_loc_sof(fsm, 0);
++		otg_set_protocol(fsm, PROTO_HOST);
++		otg_add_timer(fsm, fsm->b_ase0_brst_tmr);
++		fsm->a_bus_suspend = 0;
++		break;
++	case OTG_STATE_B_HOST:
++		otg_chrg_vbus(fsm, 0);
++		otg_loc_conn(fsm, 0);
++		otg_loc_sof(fsm, 1);
++		otg_set_protocol(fsm, PROTO_HOST);
++		usb_bus_start_enum(fsm->transceiver->host,
++				   fsm->transceiver->host->otg_port);
++		break;
++	case OTG_STATE_A_IDLE:
++		otg_drv_vbus(fsm, 0);
++		otg_chrg_vbus(fsm, 0);
++		otg_loc_conn(fsm, 0);
++		otg_loc_sof(fsm, 0);
++		otg_set_protocol(fsm, PROTO_HOST);
++		break;
++	case OTG_STATE_A_WAIT_VRISE:
++		otg_drv_vbus(fsm, 1);
++		otg_loc_conn(fsm, 0);
++		otg_loc_sof(fsm, 0);
++		otg_set_protocol(fsm, PROTO_HOST);
++		otg_add_timer(fsm, fsm->a_wait_vrise_tmr);
++		break;
++	case OTG_STATE_A_WAIT_BCON:
++		otg_drv_vbus(fsm, 1);
++		otg_loc_conn(fsm, 0);
++		otg_loc_sof(fsm, 0);
++		otg_set_protocol(fsm, PROTO_HOST);
++		otg_add_timer(fsm, fsm->a_wait_bcon_tmr);
++		break;
++	case OTG_STATE_A_HOST:
++		otg_drv_vbus(fsm, 1);
++		otg_loc_conn(fsm, 0);
++		otg_loc_sof(fsm, 1);
++		otg_set_protocol(fsm, PROTO_HOST);
++		/*
++		 * When HNP is triggered while a_bus_req = 0, a_host will
++		 * suspend too fast to complete a_set_b_hnp_en
++		 */
++		if (!fsm->a_bus_req || fsm->a_suspend_req)
++			otg_add_timer(fsm, fsm->a_wait_enum_tmr);
++		break;
++	case OTG_STATE_A_SUSPEND:
++		otg_drv_vbus(fsm, 1);
++		otg_loc_conn(fsm, 0);
++		otg_loc_sof(fsm, 0);
++		otg_set_protocol(fsm, PROTO_HOST);
++		otg_add_timer(fsm, fsm->a_aidl_bdis_tmr);
++
++		break;
++	case OTG_STATE_A_PERIPHERAL:
++		otg_loc_conn(fsm, 1);
++		otg_loc_sof(fsm, 0);
++		otg_set_protocol(fsm, PROTO_GADGET);
++		otg_drv_vbus(fsm, 1);
++		break;
++	case OTG_STATE_A_WAIT_VFALL:
++		otg_drv_vbus(fsm, 0);
++		otg_loc_conn(fsm, 0);
++		otg_loc_sof(fsm, 0);
++		otg_set_protocol(fsm, PROTO_HOST);
++		break;
++	case OTG_STATE_A_VBUS_ERR:
++		otg_drv_vbus(fsm, 0);
++		otg_loc_conn(fsm, 0);
++		otg_loc_sof(fsm, 0);
++		otg_set_protocol(fsm, PROTO_UNDEF);
++		break;
++	default:
++		break;
++	}
++
++	fsm->transceiver->state = new_state;
++	return 0;
++}
++
++/* State change judgement */
++int otg_statemachine(struct otg_fsm *fsm)
++{
++	enum usb_otg_state state;
++	unsigned long flags;
++
++	spin_lock_irqsave(&fsm->lock, flags);
++
++	state = fsm->transceiver->state;
++	state_changed = 0;
++	/* State machine state change judgement */
++
++	VDBG(" State: %s \n", state_string(state));
++
++	switch (state) {
++	case OTG_STATE_UNDEFINED:
++		if (fsm->id)
++			otg_set_state(fsm, OTG_STATE_B_IDLE);
++		else
++			otg_set_state(fsm, OTG_STATE_A_IDLE);
++		break;
++	case OTG_STATE_B_IDLE:
++		if (!fsm->id)
++			otg_set_state(fsm, OTG_STATE_A_IDLE);
++		else if (fsm->b_sess_vld && fsm->transceiver->gadget)
++			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
++		else if (fsm->b_bus_req && fsm->b_sess_end && fsm->b_se0_srp)
++			otg_set_state(fsm, OTG_STATE_B_SRP_INIT);
++		break;
++	case OTG_STATE_B_SRP_INIT:
++		if (!fsm->id || fsm->b_srp_done)
++			otg_set_state(fsm, OTG_STATE_B_IDLE);
++		break;
++	case OTG_STATE_B_PERIPHERAL:
++		if (!fsm->id || !fsm->b_sess_vld)
++			otg_set_state(fsm, OTG_STATE_B_IDLE);
++		else if (fsm->b_bus_req &&
++			 fsm->transceiver->
++			 gadget->b_hnp_enable && fsm->a_bus_suspend)
++			otg_set_state(fsm, OTG_STATE_B_WAIT_ACON);
++		break;
++	case OTG_STATE_B_WAIT_ACON:
++		if (fsm->a_conn)
++			otg_set_state(fsm, OTG_STATE_B_HOST);
++		else if (!fsm->id || !fsm->b_sess_vld)
++			otg_set_state(fsm, OTG_STATE_B_IDLE);
++		else if (fsm->a_bus_resume || fsm->b_ase0_brst_tmout) {
++			fsm->b_ase0_brst_tmout = 0;
++			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
++		}
++		break;
++	case OTG_STATE_B_HOST:
++		if (!fsm->id || !fsm->b_sess_vld)
++			otg_set_state(fsm, OTG_STATE_B_IDLE);
++		else if (!fsm->b_bus_req || !fsm->a_conn)
++			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
++		break;
++	case OTG_STATE_A_IDLE:
++		if (fsm->id)
++			otg_set_state(fsm, OTG_STATE_B_IDLE);
++		else if (!fsm->a_bus_drop && (fsm->a_bus_req || fsm->a_srp_det))
++			otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE);
++		break;
++	case OTG_STATE_A_WAIT_VRISE:
++		if (fsm->id || fsm->a_bus_drop || fsm->a_vbus_vld ||
++		    fsm->a_wait_vrise_tmout) {
++			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
++		}
++		break;
++	case OTG_STATE_A_WAIT_BCON:
++		if (!fsm->a_vbus_vld)
++			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
++		else if (fsm->id | fsm->a_bus_drop | fsm->a_wait_bcon_tmout)
++			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
++		else if (fsm->b_conn)
++			otg_set_state(fsm, OTG_STATE_A_HOST);
++		break;
++	case OTG_STATE_A_HOST:
++		if ((!fsm->a_bus_req || fsm->a_suspend_req) &&
++		    fsm->transceiver->host->b_hnp_enable)
++			otg_set_state(fsm, OTG_STATE_A_SUSPEND);
++		else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop)
++			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
++		else if (!fsm->a_vbus_vld)
++			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
++		break;
++	case OTG_STATE_A_SUSPEND:
++		if (!fsm->b_conn && fsm->transceiver->host->b_hnp_enable)
++			otg_set_state(fsm, OTG_STATE_A_PERIPHERAL);
++		else if (!fsm->b_conn && !fsm->transceiver->host->b_hnp_enable)
++			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
++		else if (fsm->a_bus_req || fsm->b_bus_resume)
++			otg_set_state(fsm, OTG_STATE_A_HOST);
++		else if (fsm->id || fsm->a_bus_drop || fsm->a_aidl_bdis_tmout)
++			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
++		else if (!fsm->a_vbus_vld)
++			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
++		break;
++	case OTG_STATE_A_PERIPHERAL:
++		if (fsm->id || fsm->a_bus_drop)
++			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
++		else if (fsm->b_bus_suspend)
++			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
++		else if (!fsm->a_vbus_vld)
++			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
++		break;
++	case OTG_STATE_A_WAIT_VFALL:
++		if (fsm->id || fsm->a_bus_req || (!fsm->a_sess_vld &&
++						  !fsm->b_conn))
++			otg_set_state(fsm, OTG_STATE_A_IDLE);
++		break;
++	case OTG_STATE_A_VBUS_ERR:
++		if (fsm->id || fsm->a_bus_drop || fsm->a_clr_err)
++			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
++		break;
++	default:
++		break;
++	}
++	spin_unlock_irqrestore(&fsm->lock, flags);
++
++	return state_changed;
++}
++EXPORT_SYMBOL(otg_statemachine);
+--- /dev/null
++++ b/drivers/usb/otg/otg_fsm.h
+@@ -0,0 +1,170 @@
++/* Copyright (C) 2006-2007 Freescale Semiconductor, Inc.
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the  GNU General Public License along
++ * with this program; if not, write  to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#ifndef OTG_FSM_H
++#define OTG_FSM_H
++
++#if 1
++#define DEBUG 	1
++#define VERBOSE 	1
++#endif
++
++#ifdef DEBUG
++#define DBG(fmt, args...) 	printk(KERN_DEBUG "[%s]  " fmt , \
++				__FUNCTION__, ## args)
++#else
++#define DBG(fmt, args...)	do {} while (0)
++#endif
++
++#ifdef VERBOSE
++#define VDBG		DBG
++#else
++#define VDBG(stuff...)	do {} while (0)
++#endif
++
++#ifdef VERBOSE
++#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__)
++#else
++#define MPC_LOC do {} while (0)
++#endif
++
++#define PROTO_UNDEF	0
++#define PROTO_HOST	1
++#define PROTO_GADGET	2
++
++
++
++
++
++/* OTG state machine according to the OTG spec */
++struct otg_fsm {
++	/* Input */
++	int a_bus_resume;
++	int a_bus_suspend;
++	int a_conn;
++	int a_sess_vld;
++	int a_srp_det;
++	int a_vbus_vld;
++	int b_bus_resume;
++	int b_bus_suspend;
++	int b_conn;
++	int b_se0_srp;
++	int b_sess_end;
++	int b_sess_vld;
++	int id;
++
++	/* Internal variables */
++	int a_set_b_hnp_en;
++	int b_srp_done;
++	int b_hnp_enable;
++
++	/* Timeout indicator for timers */
++	int a_wait_vrise_tmout;
++	int a_wait_bcon_tmout;
++	int a_aidl_bdis_tmout;
++	int b_ase0_brst_tmout;
++
++	/* Informative variables */
++	int a_bus_drop;
++	int a_bus_req;
++	int a_clr_err;
++	int a_suspend_req;
++	int b_bus_req;
++
++	/* Output */
++	int drv_vbus;
++	int loc_conn;
++	int loc_sof;
++
++	struct otg_fsm_ops *ops;
++	struct otg_transceiver *transceiver;
++
++	void *a_wait_vrise_tmr;
++	void *a_wait_bcon_tmr;
++	void *a_aidl_bdis_tmr;
++	void *b_ase0_brst_tmr;
++	void *b_se0_srp_tmr;
++	void *b_srp_fail_tmr;
++	void *a_wait_enum_tmr;
++
++	/* Current usb protocol used: 0:undefine; 1:host; 2:client */
++	int protocol;
++	spinlock_t lock;		/* fsm lock */
++};
++
++struct otg_fsm_ops {
++	void 	(*chrg_vbus)(int on);
++	void 	(*drv_vbus)(int on);
++	void 	(*loc_conn)(int on);
++	void 	(*loc_sof)(int on);
++	void	(*start_pulse)(void);
++	void	(*add_timer)(void *timer);
++	void	(*del_timer)(void *timer);
++	int	(*start_host)(struct otg_fsm *fsm, int on);
++	int	(*start_gadget)(struct otg_fsm *fsm, int on);
++};
++
++
++static inline void otg_chrg_vbus(struct otg_fsm *fsm, int on)
++{
++	fsm->ops->chrg_vbus(on);
++}
++
++static inline void otg_drv_vbus(struct otg_fsm *fsm, int on)
++{
++	if (fsm->drv_vbus != on) {
++		fsm->drv_vbus = on;
++		fsm->ops->drv_vbus(on);
++	}
++}
++
++static inline void otg_loc_conn(struct otg_fsm *fsm, int on)
++{
++	if (fsm->loc_conn != on) {
++		fsm->loc_conn = on;
++		fsm->ops->loc_conn(on);
++	}
++}
++
++static inline void otg_loc_sof(struct otg_fsm *fsm, int on)
++{
++	if (fsm->loc_sof != on) {
++		fsm->loc_sof = on;
++		fsm->ops->loc_sof(on);
++	}
++}
++
++static inline void otg_start_pulse(struct otg_fsm *fsm)
++{
++	fsm->ops->start_pulse();
++}
++
++static inline void otg_add_timer(struct otg_fsm *fsm, void *timer)
++{
++	fsm->ops->add_timer(timer);
++}
++
++static inline void otg_del_timer(struct otg_fsm *fsm, void *timer)
++{
++	fsm->ops->del_timer(timer);
++}
++
++extern int otg_statemachine(struct otg_fsm *fsm);
++
++extern const char *state_string(enum usb_otg_state state);
++
++#endif
+--- a/include/asm-m68k/mcf5445x_usb.h
++++ b/include/asm-m68k/mcf5445x_usb.h
+@@ -41,7 +41,8 @@ static inline void fsl_platform_set_host
+ 
+ 	/* set host mode and select "big endian" */
+ 	temp = fsl_readl(&regs->usbmode);
+-	fsl_writel(temp | USBMODE_CM_HOST | USBMODE_ES, &regs->usbmode);
++	temp |= USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
++	fsl_writel(temp, &regs->usbmode);
+ 
+ 	pr_debug("%s: set usbmode to 0x%x\n\n", __FUNCTION__,
+ 		fsl_readl(&regs->usbmode));
+--- a/include/linux/fsl_devices.h
++++ b/include/linux/fsl_devices.h
+@@ -91,6 +91,19 @@ enum fsl_usb2_operating_modes {
+ 	FSL_USB2_DR_OTG,
+ };
+ 
++/* DDD
++ * replace _operating_modes with _controller
++ *
++ * the operating_mode tests in fsl_platform_verify() aren't needed,
++ * since the ehci driver isn't going to be probe()d unless it's
++ * "fsl-ehci" device anyway, and what we really need to know is
++ * which controller (MPH/DR) we're dealing with
++ */
++enum fsl_usb2_controller {
++	FSL_USB2_MPH,
++	FSL_USB2_DR,
++};
++
+ enum fsl_usb2_phy_modes {
+ 	FSL_USB2_PHY_NONE,
+ 	FSL_USB2_PHY_ULPI,
+@@ -101,9 +114,36 @@ enum fsl_usb2_phy_modes {
+ 
+ struct fsl_usb2_platform_data {
+ 	/* board specific information */
+-	enum fsl_usb2_operating_modes	operating_mode;
++	/*
++	 * DDD see note above
++	 * enum fsl_usb2_operating_modes	operating_mode;
++	 */
++	enum fsl_usb2_controller	controller;
+ 	enum fsl_usb2_phy_modes		phy_mode;
+ 	unsigned int			port_enables;
++	/*
++	 * DDD this could arguably be moved to a separate
++	 * fsl usb2 device header file
++	 */
++	char *name;			/* pretty print */
++	int (*platform_init) (struct platform_device *);
++	void (*platform_uninit) (struct platform_device *);
++	int (*platform_verify) (struct platform_device *);
++	u32				xcvr_type;	/* PORTSCX_PTS_* */
++	u32				view;		/* ULPI viewport register */
++	u32				r_start;	/* start of MEM resource */
++	u32				r_len;		/* length of MEM resource */
++	void __iomem			*regs;		/* ioremap'd register base */
++	unsigned			big_endian_mmio : 1;
++	unsigned			big_endian_desc : 1;
++	unsigned			es : 1;		/* need USBMODE:ES */
++	unsigned			have_sysif_regs : 1;
++	unsigned			le_setup_buf : 1;
++	unsigned			does_otg : 1;	/* set IFF it's an OTG port */
++
++	unsigned			power_budget;	/* for hcd->power_budget */
++	struct fsl_xcvr_ops		*xcvr_ops;
++	int				max_ep_nr;	/* max # of endpoints */
+ };
+ 
+ /* Flags in fsl_usb2_mph_platform_data */
+--- /dev/null
++++ b/include/linux/usb/fsl_usb2.h
+@@ -0,0 +1,464 @@
++/*
++ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/*
++ * Freescale USB device/endpoint management registers
++ */
++#ifndef __FSL_USB2_H
++#define __FSL_USB2_H
++
++
++ /* USB DR device mode registers (Little Endian) */
++struct fsl_usb_device_regs {
++	/* Capability register */
++	u32 id;
++	u32 res1[63];
++	u16 caplength;		/* Capability Register Length */
++	u16 hciversion;		/* Host Controller Interface Version */
++	u32 hcsparams;		/* Host Controller Structual Parameters */
++	u32 hccparams;		/* Host Controller Capability Parameters */
++	u32 res2[5];
++	u32 dciversion;		/* Device Controller Interface Version */
++	u32 dccparams;		/* Device Controller Capability Parameters */
++	u32 res3[6];
++	/* Operation register */
++	u32 usbcmd;		/* USB Command Register */
++	u32 usbsts;		/* USB Status Register */
++	u32 usbintr;		/* USB Interrupt Enable Register */
++	u32 frindex;		/* Frame Index Register */
++	u32 res4;
++	u32 deviceaddr;		/* Device Address */
++	u32 endpointlistaddr;	/* Endpoint List Address Register */
++	u32 res5;
++	u32 burstsize;		/* Master Interface Data Burst Size Register */
++	u32 txttfilltuning;	/* Transmit FIFO Tuning Controls Register */
++	u32 res6[2];
++	u32 ulpiview;
++	u32 res7[3];
++	u32 configflag;		/* Configure Flag Register */
++	u32 portsc1;		/* Port 1 Status and Control Register */
++	u32 res8[7];
++	u32 otgsc;		/* On-The-Go Status and Control */
++	u32 usbmode;		/* USB Mode Register */
++	u32 endptsetupstat;	/* Endpoint Setup Status Register */
++	u32 endpointprime;	/* Endpoint Initialization Register */
++	u32 endptflush;		/* Endpoint Flush Register */
++	u32 endptstatus;	/* Endpoint Status Register */
++	u32 endptcomplete;	/* Endpoint Complete Register */
++#if 0
++	u32 endptctrl[USB_MAX_ENDPOINTS]; /* Endpoint Control Registers */
++#else
++	// DDD see DCCPARAMS:DEN for the real number of device endpoints
++	// DDD 16 is the max
++	u32 endptctrl[16];	/* Endpoint Control Registers */
++#endif
++};
++
++ /* USB DR host mode registers (Little Endian) */
++struct fsl_usb_host_regs {
++	/* Capability register */
++	u32 id;
++	u32 res1[63];
++	u16 caplength;		/* Capability Register Length */
++	u16 hciversion;		/* Host Controller Interface Version */
++	u32 hcsparams;		/* Host Controller Structual Parameters */
++	u32 hccparams;		/* Host Controller Capability Parameters */
++	u32 res2[5];
++	u32 dciversion;		/* Device Controller Interface Version */
++	u32 dccparams;		/* Device Controller Capability Parameters */
++	u32 res3[6];
++	/* Operation register */
++	u32 usbcmd;		/* USB Command Register */
++	u32 usbsts;		/* USB Status Register */
++	u32 usbintr;		/* USB Interrupt Enable Register */
++	u32 frindex;		/* Frame Index Register */
++	u32 res4;
++	u32 periodiclistbase;	/* Periodic Frame List Base Address Register */
++	u32 asynclistaddr;	/* Current Asynchronous List Address Register */
++	u32 res5;
++	u32 burstsize;		/* Master Interface Data Burst Size Register */
++	u32 txttfilltuning;	/* Transmit FIFO Tuning Controls Register */
++	u32 res6[2];
++	u32 ulpiview;
++	u32 res7[3];
++	u32 configflag;		/* Configure Flag Register */
++	u32 portsc1;		/* Port 1 Status and Control Register */
++	u32 res8[7];
++	u32 otgsc;		/* On-The-Go Status and Control */
++	u32 usbmode;		/* USB Mode Register */
++	u32 endptsetupstat;	/* Endpoint Setup Status Register */
++	u32 endpointprime;	/* Endpoint Initialization Register */
++	u32 endptflush;		/* Endpoint Flush Register */
++	u32 endptstatus;	/* Endpoint Status Register */
++	u32 endptcomplete;	/* Endpoint Complete Register */
++#if 0
++	u32 endptctrl[USB_MAX_ENDPOINTS]; /* Endpoint Control Registers */
++#else
++	// DDD: do these exits in the host register set??
++	// DDD see DCCPARAMS:DEN for the real number of device endpoints
++	// DDD 16 is the max
++	u32 endptctrl[16];	/* Endpoint Control Registers */
++#endif
++};
++
++ /* non-EHCI USB system interface registers (Big Endian) */
++struct usb_sys_interface {
++	u32 snoop1;
++	u32 snoop2;
++	u32 age_cnt_thresh;	/* Age Count Threshold Register */
++	u32 pri_ctrl;		/* Priority Control Register */
++	u32 si_ctrl;		/* System Interface Control Register */
++	u32 res[59];
++	u32 control;		/* General Purpose Control Register */
++};
++
++/* ep0 transfer state */
++#define WAIT_FOR_SETUP		0
++#define DATA_STATE_XMIT		1
++#define DATA_STATE_NEED_ZLP	2
++#define WAIT_FOR_OUT_STATUS	3
++#define DATA_STATE_RECV		4
++
++/* Frame Index Register Bit Masks */
++#define	USB_FRINDEX_MASKS			0x3fff
++
++
++
++/* USBCMD Register Bit Masks */
++#define USB_CMD_RUN_STOP			0x00000001
++#define USB_CMD_CTRL_RESET			0x00000002
++#define USB_CMD_PERIODIC_SCHEDULE_EN		0x00000010
++#define USB_CMD_ASYNC_SCHEDULE_EN		0x00000020
++#define USB_CMD_INT_AA_DOORBELL			0x00000040
++#define USB_CMD_ASP				0x00000300
++#define USB_CMD_ASYNC_SCH_PARK_EN		0x00000800
++#define USB_CMD_SUTW				0x00002000
++#define USB_CMD_ATDTW				0x00004000
++#define USB_CMD_ITC				0x00FF0000
++
++/* bit 15,3,2 are frame list size */
++#define USB_CMD_FRAME_SIZE_1024			0x00000000
++#define USB_CMD_FRAME_SIZE_512			0x00000004
++#define USB_CMD_FRAME_SIZE_256			0x00000008
++#define USB_CMD_FRAME_SIZE_128			0x0000000C
++#define USB_CMD_FRAME_SIZE_64			0x00008000
++#define USB_CMD_FRAME_SIZE_32			0x00008004
++#define USB_CMD_FRAME_SIZE_16			0x00008008
++#define USB_CMD_FRAME_SIZE_8			0x0000800C
++
++/* bit 9-8 are async schedule park mode count */
++#define USB_CMD_ASP_00				0x00000000
++#define USB_CMD_ASP_01				0x00000100
++#define USB_CMD_ASP_10				0x00000200
++#define USB_CMD_ASP_11				0x00000300
++#define USB_CMD_ASP_BIT_POS			8
++
++/* bit 23-16 are interrupt threshold control */
++#define USB_CMD_ITC_NO_THRESHOLD		0x00000000
++#define USB_CMD_ITC_1_MICRO_FRM			0x00010000
++#define USB_CMD_ITC_2_MICRO_FRM			0x00020000
++#define USB_CMD_ITC_4_MICRO_FRM			0x00040000
++#define USB_CMD_ITC_8_MICRO_FRM			0x00080000
++#define USB_CMD_ITC_16_MICRO_FRM		0x00100000
++#define USB_CMD_ITC_32_MICRO_FRM		0x00200000
++#define USB_CMD_ITC_64_MICRO_FRM		0x00400000
++#define USB_CMD_ITC_BIT_POS			16
++
++
++
++
++/* USB STS Register Bit Masks */
++#define USB_STS_INT				0x00000001
++#define USB_STS_ERR				0x00000002
++#define USB_STS_PORT_CHANGE			0x00000004
++#define USB_STS_FRM_LST_ROLL			0x00000008
++#define USB_STS_SYS_ERR				0x00000010
++#define USB_STS_IAA				0x00000020
++#define USB_STS_RESET				0x00000040
++#define USB_STS_SOF				0x00000080
++#define USB_STS_SUSPEND				0x00000100
++#define USB_STS_HC_HALTED			0x00001000
++#define USB_STS_RCL				0x00002000
++#define USB_STS_PERIODIC_SCHEDULE		0x00004000
++#define USB_STS_ASYNC_SCHEDULE			0x00008000
++
++/* USB INTR Register Bit Masks */
++#define USB_INTR_INT_EN				0x00000001
++#define USB_INTR_ERR_INT_EN			0x00000002
++#define USB_INTR_PTC_DETECT_EN			0x00000004
++#define USB_INTR_FRM_LST_ROLL_EN		0x00000008
++#define USB_INTR_SYS_ERR_EN			0x00000010
++#define USB_INTR_ASYN_ADV_EN			0x00000020
++#define USB_INTR_RESET_EN			0x00000040
++#define USB_INTR_SOF_EN				0x00000080
++#define USB_INTR_DEVICE_SUSPEND			0x00000100
++
++/* Device Address bit masks */
++#define USB_DEVICE_ADDRESS_MASK			0xFE000000
++#define USB_DEVICE_ADDRESS_BIT_POS		25
++
++/* endpoint list address bit masks */
++#define USB_EP_LIST_ADDRESS_MASK		0xfffff800
++
++
++/* x_PORTSCx */
++/* bit 31-30 are port transceiver select */
++#define PORTSCX_PTS_MASK		(3 << 30)	/* parallel xcvr select mask */
++#define PORTSCX_PHY_TYPE_SEL		PORTSCX_PTS_MASK
++#define PORTSCX_PTS_UTMI		(0 << 30)	/* UTMI/UTMI+ */
++#define PORTSCX_PTS_PHILIPS		(1 << 30)	/* Philips classic */
++#define PORTSCX_PTS_ULPI		(2 << 30)	/* ULPI */
++#define PORTSCX_PTS_SERIAL		(3 << 30)	/* serial */
++#define PORTSCX_PTS_FSLS		PORTSCX_PTS_SERIAL
++#define PORTSCX_PTS_ONCHIP		PORTSCX_PTS_FSLS
++
++#define PORTSCX_STS			(1 << 29)	/* serial xcvr select */
++
++/* bit 28 is parallel transceiver width for UTMI interface */
++#define PORTSCX_PTW_8BIT		(0 << 28)	/* 8 bit parallel xcvr */
++#define PORTSCX_PTW_16BIT		(1 << 28)	/* 16 bi parallel xcvr */
++
++/* bit 27-26 are port speed */
++#define PORTSCX_PORT_SPEED_FULL		(0 << 26)
++#define PORTSCX_PORT_SPEED_LOW		(1 << 26)
++#define PORTSCX_PORT_SPEED_HIGH		(2 << 26)
++#define PORTSCX_PORT_SPEED_UNDEF	(3 << 26)
++#define PORTSCX_PORT_SPEED_MASK		(3 << 26)
++
++#define PORTSCX_PHY_LOW_POWER_SPD	(1 << 23)	/* phy low pwr suspend/clk disable */
++
++/* bit 19-16 are port test control */
++#define PORTSCX_PTC_DISABLE		(0 << 16)
++#define PORTSCX_PTC_JSTATE		(1 << 16)
++#define PORTSCX_PTC_KSTATE		(2 << 16)
++#define PORTSCX_PTC_SEQNAK		(3 << 16)	/* SE0 (host) / NAK (device) */
++#define PORTSCX_PTC_PACKET		(4 << 16)
++#define PORTSCX_PTC_FORCE_EN_HS		(5 << 16)
++#define PORTSCX_PTC_FORCE_EN_FS		(6 << 16)
++#define PORTSCX_PTC_FORCE_EN_LS		(7 << 16)
++
++
++/* bit 15-14 are port indicator control */
++#define PORTSCX_PIC_OFF			(0 << 14)
++#define PORTSCX_PIC_AMBER		(1 << 14)
++#define PORTSCX_PIC_GREEN		(2 << 14)
++#define PORTSCX_PIC_UNDEF		(3 << 14)
++
++#define PORTSCX_PORT_POWER		(1 << 12)	/* port power */
++
++/* bit 11-10 are line status */
++#define PORTSCX_LS_MASK			(3 << 10)	/* Line State mask */
++#define PORTSCX_LS_SE0			(0 << 10)	/* SE0     */
++#define PORTSCX_LS_K_STATE		(1 << 10)	/* K-state */
++#define PORTSCX_LS_J_STATE		(2 << 10)	/* J-state */
++
++#define PORTSCX_PORT_RESET		(1 <<  8)	/* Port reset */
++#define PORTSCX_PORT_SUSPEND		(1 <<  7)	/* Suspend */
++#define PORTSCX_PORT_FORCE_RESUME	(1 <<  6)	/* Force port resume */
++#define PORTSCX_OVER_CURRENT_CHG	(1 <<  5)	/* over current change */
++#define PORTSCX_OVER_CURRENT_ACT	(1 <<  4)	/* over currrent active */
++#define PORTSCX_PORT_EN_DIS_CHANGE	(1 <<  3)	/* port {en,dis}able change */
++#define PORTSCX_PORT_ENABLE		(1 <<  2)	/* port enabled */
++#define PORTSCX_CONNECT_STATUS_CHANGE	(1 <<  1)	/* connect status change */
++#define PORTSCX_CURRENT_CONNECT_STATUS	(1 <<  0)	/* current connect status */
++
++#define PORTSCX_W1C_BITS                     \
++       ( PORTSCX_CONNECT_STATUS_CHANGE |     \
++         PORTSCX_PORT_EN_DIS_CHANGE    |     \
++         PORTSCX_OVER_CURRENT_CHG )
++
++
++
++/* UOG_OTGSC Register Bits */
++/* control bits: */
++#define  OTGSC_CTRL_VBUS_DISCHARGE	(1 <<  0)
++#define  OTGSC_CTRL_VBUS_CHARGE		(1 <<  1)
++#define  OTGSC_CTRL_OTG_TERM		(1 <<  3)	/* controls DM pulldown */
++#define  OTGSC_CTRL_DATA_PULSING	(1 <<  4)
++#define  OTGSC_CTRL_USB_ID_PU		(1 <<  5)	/* enable ID pullup */
++/* current status: (R/O) */
++#define  OTGSC_STS_USB_ID		(1 <<  8)	/* 0=A-device  1=B-device */
++#define  OTGSC_STS_A_VBUS_VALID		(1 <<  9)
++#define  OTGSC_STS_A_SESSION_VALID	(1 << 10)
++#define  OTGSC_STS_B_SESSION_VALID	(1 << 11)
++#define  OTGSC_STS_B_SESSION_END	(1 << 12)
++#define  OTGSC_STS_1ms_TIMER		(1 << 13)
++#define  OTGSC_STS_DATA_PULSE		(1 << 14)
++/* interrupt status: (write to clear) */
++#define  OTGSC_INTSTS_MASK		(0x7f << 16)
++#define  OTGSC_INTSTS_USB_ID		(1 << 16)
++#define  OTGSC_INTSTS_A_VBUS_VALID	(1 << 17)
++#define  OTGSC_INTSTS_A_SESSION_VALID	(1 << 18)
++#define  OTGSC_INTSTS_B_SESSION_VALID	(1 << 19)
++#define  OTGSC_INTSTS_B_SESSION_END	(1 << 20)
++#define  OTGSC_INTSTS_1MS_TIMER		(1 << 21)
++#define  OTGSC_INTSTS_DATA_PULSE	(1 << 22)
++/* interrupt enables: */
++#define  OTGSC_IE_MASK			(0x7f << 24)
++#define  OTGSC_IE_USB_ID		(1 << 24)
++#define  OTGSC_IE_A_VBUS_VALID		(1 << 25)
++#define  OTGSC_IE_A_SESSION_VALID	(1 << 26)
++#define  OTGSC_IE_B_SESSION_VALID	(1 << 27)
++#define  OTGSC_IE_B_SESSION_END		(1 << 28)
++#define  OTGSC_IE_1ms_TIMER		(1 << 29)
++#define  OTGSC_IE_DATA_PULSE		(1 << 30)
++
++#if 1	/* DDD FIXME these here for compatibility between my names and Leo's */
++/* OTG interrupt enable bit masks */
++#define  OTGSC_INTERRUPT_ENABLE_BITS_MASK	OTGSC_IE_MASK
++
++/* OTG interrupt status bit masks */
++#define  OTGSC_INTERRUPT_STATUS_BITS_MASK	OTGSC_INTSTS_MASK
++#endif // 1
++
++
++
++/* x_USBMODE */
++#undef USBMODE_SDIS	/* defined as bit 3 in drivers/usb/host/ehci.h */
++#define USBMODE_SDIS		(1 << 4)	/* stream disable mode */
++#define USBMODE_SLOM		(1 << 3)	/* setup lockout mode */
++#define USBMODE_ES		(1 << 2)	/* (big) endian select */
++#define USBMODE_CM_MASK		(3 << 0)	/* controller mode mask */
++#define USBMODE_CM_HOST		(3 << 0)	/* host */
++#define USBMODE_CM_DEVICE	(2 << 0)	/* device */
++// DDD #define USBMODE_CM_IDLE		(0 << 0)	/* idle */
++
++/* DDD for compatibility for now */
++#define USB_MODE_CTRL_MODE_IDLE		USBMODE_CM_IDLE
++#define USB_MODE_CTRL_MODE_DEVICE	USBMODE_CM_DEVICE
++#define USB_MODE_CTRL_MODE_HOST		USBMODE_CM_HOST
++#define USB_MODE_SETUP_LOCK_OFF		USBMODE_SLOM
++#define USB_MODE_STREAM_DISABLE		USBMODE_SDIS
++
++
++/* ULPIVIEW register bits */
++#define ULPIVW_WU		(1 << 31)	/* Wakeup */
++#define ULPIVW_RUN		(1 << 30)	/* read/write run */
++#define ULPIVW_WRITE		(1 << 29)	/* 0=read  1=write */
++#define ULPIVW_SS		(1 << 27)	/* SyncState */
++#define ULPIVW_PORT_MASK	0x07		/* Port field */
++#define ULPIVW_PORT_SHIFT	24
++#define ULPIVW_ADDR_MASK	0xFF		/* data address field */
++#define ULPIVW_ADDR_SHIFT	16
++#define ULPIVW_RDATA_MASK	0xFF		/* read data field */
++#define ULPIVW_RDATA_SHIFT	8
++#define ULPIVW_WDATA_MASK	0xFF		/* write data field */
++#define ULPIVW_WDATA_SHIFT	0
++
++
++/* Endpoint Flush Register */
++#define EPFLUSH_TX_OFFSET			0x00010000
++#define EPFLUSH_RX_OFFSET			0x00000000
++
++/* Endpoint Setup Status bit masks */
++#define EP_SETUP_STATUS_MASK			0x0000003F
++#define EP_SETUP_STATUS_EP0			0x00000001
++
++/* ENDPOINTCTRLx  Register Bit Masks */
++#define EPCTRL_TX_ENABLE			0x00800000
++#define EPCTRL_TX_DATA_TOGGLE_RST		0x00400000	/* Not EP0 */
++#define EPCTRL_TX_DATA_TOGGLE_INH		0x00200000	/* Not EP0 */
++#define EPCTRL_TX_TYPE				0x000C0000
++#define EPCTRL_TX_DATA_SOURCE			0x00020000	/* Not EP0 */
++#define EPCTRL_TX_EP_STALL			0x00010000
++#define EPCTRL_RX_ENABLE			0x00000080
++#define EPCTRL_RX_DATA_TOGGLE_RST		0x00000040	/* Not EP0 */
++#define EPCTRL_RX_DATA_TOGGLE_INH		0x00000020	/* Not EP0 */
++#define EPCTRL_RX_TYPE				0x0000000C
++#define EPCTRL_RX_DATA_SINK			0x00000002	/* Not EP0 */
++#define EPCTRL_RX_EP_STALL			0x00000001
++
++/* bit 19-18 and 3-2 are endpoint type */
++#define EPCTRL_EP_TYPE_CONTROL			0
++#define EPCTRL_EP_TYPE_ISO			1
++#define EPCTRL_EP_TYPE_BULK			2
++#define EPCTRL_EP_TYPE_INTERRUPT		3
++#define EPCTRL_TX_EP_TYPE_SHIFT			18
++#define EPCTRL_RX_EP_TYPE_SHIFT			2
++
++/* SNOOPn Register Bit Masks */
++#define SNOOP_ADDRESS_MASK			0xFFFFF000
++#define SNOOP_SIZE_ZERO				0x00	/* snooping disable */
++#define SNOOP_SIZE_4KB				0x0B	/* 4KB snoop size */
++#define SNOOP_SIZE_8KB				0x0C
++#define SNOOP_SIZE_16KB				0x0D
++#define SNOOP_SIZE_32KB				0x0E
++#define SNOOP_SIZE_64KB				0x0F
++#define SNOOP_SIZE_128KB			0x10
++#define SNOOP_SIZE_256KB			0x11
++#define SNOOP_SIZE_512KB			0x12
++#define SNOOP_SIZE_1MB				0x13
++#define SNOOP_SIZE_2MB				0x14
++#define SNOOP_SIZE_4MB				0x15
++#define SNOOP_SIZE_8MB				0x16
++#define SNOOP_SIZE_16MB				0x17
++#define SNOOP_SIZE_32MB				0x18
++#define SNOOP_SIZE_64MB				0x19
++#define SNOOP_SIZE_128MB			0x1A
++#define SNOOP_SIZE_256MB			0x1B
++#define SNOOP_SIZE_512MB			0x1C
++#define SNOOP_SIZE_1GB				0x1D
++#define SNOOP_SIZE_2GB				0x1E	/* 2GB snoop size */
++
++/* pri_ctrl Register Bit Masks */
++#define PRI_CTRL_PRI_LVL1			0x0000000C
++#define PRI_CTRL_PRI_LVL0			0x00000003
++
++/* si_ctrl Register Bit Masks */
++#define SI_CTRL_ERR_DISABLE			0x00000010
++#define SI_CTRL_IDRC_DISABLE			0x00000008
++#define SI_CTRL_RD_SAFE_EN			0x00000004
++#define SI_CTRL_RD_PREFETCH_DISABLE		0x00000002
++#define SI_CTRL_RD_PREFEFETCH_VAL		0x00000001
++
++
++/* control Register Bit Masks */
++#define USB_CTRL_IOENB				0x00000004
++#define USB_CTRL_ULPI_INT0EN			0x00000001
++
++
++/* Endpoint Transfer Descriptor bit Masks */
++#define DTD_NEXT_TERMINATE			0x00000001
++#define DTD_IOC					0x00008000
++#define DTD_STATUS_ACTIVE			0x00000080
++#define DTD_STATUS_HALTED			0x00000040
++#define DTD_STATUS_DATA_BUFF_ERR		0x00000020
++#define DTD_STATUS_TRANSACTION_ERR		0x00000008
++#define DTD_RESERVED_FIELDS			0x80007300
++#define DTD_ADDR_MASK				0xFFFFFFE0
++#define DTD_PACKET_SIZE				0x7FFF0000
++#define DTD_LENGTH_BIT_POS			16
++#define DTD_ERROR_MASK (DTD_STATUS_HALTED | \
++			DTD_STATUS_DATA_BUFF_ERR | \
++			DTD_STATUS_TRANSACTION_ERR)
++/* Alignment requirements; must be a power of two */
++#define DTD_ALIGNMENT				0x20
++#define QH_ALIGNMENT				2048
++
++/* Controller dma boundary */
++#define UDC_DMA_BOUNDARY			0x1000
++
++#if defined CONFIG_PPC32
++#define fsl_readl(addr)		in_le32((addr))
++#define fsl_writel(addr, val32)	out_le32((addr), (val32))
++#elif defined CONFIG_COLDFIRE
++#define fsl_readl(addr)		in_be32((__force unsigned *)(addr))
++#define fsl_writel(val32, addr)	out_be32((__force unsigned *)(addr), (val32))
++
++#define fsl_readw(addr)		in_be16((__force unsigned *)(addr))
++#define fsl_writew(val16, addr)	out_be16((__force unsigned *)(addr), (val16))
++#else
++#error fsl_{readl, writel} must be defined
++#endif
++
++#endif	/* __FSL_USB2_H */
+--- /dev/null
++++ b/include/linux/usb/fsl_xcvr.h
+@@ -0,0 +1,42 @@
++/*
++ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++enum fsl_usb_ctrlr {
++	USB_CTRLR_H1 = 0,
++	USB_CTRLR_H2 = 1,
++	USB_CTRLR_OTG = 2,
++};
++
++
++/**
++ * struct fsl_xcvr_ops - USB transceiver operations
++ *
++ * @xcvr_type: one of PORTSCX_PTS_{UTMI,SERIAL,ULPI}
++ * @init: transceiver- and board-specific initialization function
++ * @uninit: transceiver- and board-specific uninitialization function
++ * @set_host:
++ * @set_device:
++ *
++ */
++struct fsl_xcvr_ops {
++	enum fsl_usb_ctrlr ctrlr;	/* H1, H2, OTG */
++	u32 xcvr_type;
++
++	void (*init)(struct platform_device *pdev);
++	void (*uninit)(struct platform_device *pdev);
++	void (*set_host)(void);	/* DDD combine set_host and _device ? */
++	void (*set_device)(void);
++	void (*set_vbus_power)(struct fsl_usb2_platform_data *pdata, int on);
++};
++
++
diff --git a/target/linux/coldfire/patches/017-mcfv4e_elf_entry_stext.patch b/target/linux/coldfire/patches/017-mcfv4e_elf_entry_stext.patch
new file mode 100644
index 0000000000..ffb3c8aeca
--- /dev/null
+++ b/target/linux/coldfire/patches/017-mcfv4e_elf_entry_stext.patch
@@ -0,0 +1,25 @@
+From 2beb3e5edd46ea1d87ac87dbb977dce423a1f124 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 21 Nov 2007 14:56:19 -0700
+Subject: [PATCH] Change elf entry point from _start to _stext.
+
+Changing the symbol was required by CodeWarrior so it could
+locate the entry point.
+
+LTIBName: mcfv4e-elf-entry-stext
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/vmlinux-cf.lds |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+--- a/arch/m68k/coldfire/vmlinux-cf.lds
++++ b/arch/m68k/coldfire/vmlinux-cf.lds
+@@ -4,7 +4,7 @@
+ 
+ OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
+ OUTPUT_ARCH(m68k)
+-ENTRY(_start)
++ENTRY(_stext)
+ jiffies = jiffies_64 + 4;
+ SECTIONS
+ {
diff --git a/target/linux/coldfire/patches/018-mcfv4e_linker_script_update.patch b/target/linux/coldfire/patches/018-mcfv4e_linker_script_update.patch
new file mode 100644
index 0000000000..3c7da56934
--- /dev/null
+++ b/target/linux/coldfire/patches/018-mcfv4e_linker_script_update.patch
@@ -0,0 +1,187 @@
+From 3aa2c28ff4271e9232b6c98ba000804de3ed3f33 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Mon, 26 Nov 2007 23:41:23 -0700
+Subject: [PATCH] Rewrite coldfire linker script.
+
+LTIBName: mcfv4e-linker-script-update
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/vmlinux-cf.lds |  107 ++++++++++++++++++++++++-------------
+ arch/m68k/kernel/vmlinux.lds.S    |    3 +-
+ 2 files changed, 72 insertions(+), 38 deletions(-)
+
+--- a/arch/m68k/coldfire/vmlinux-cf.lds
++++ b/arch/m68k/coldfire/vmlinux-cf.lds
+@@ -1,76 +1,115 @@
+-/* ld script to make m68k Coldfire Linux kernel */
++/* ld script to make m68k Coldfire Linux kernel
++ *
++ * Derived from arch/m68k/kernel/vmlinux-std.lds
++ *
++ * Updated 11/26/2007 for new CodeSourcery toolset
++ *     by Kurt Mahan <kmahan@freescale.com>
++ */
++
++#define	LOAD_OFFSET	0x00000000
+ 
+ #include <asm-generic/vmlinux.lds.h>
++#include <asm/page_offset.h>
++
++#define	START_OFFSET	0x00020000
++#define	IMAGE_START	PAGE_OFFSET_RAW + START_OFFSET
+ 
+ OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
+ OUTPUT_ARCH(m68k)
+ ENTRY(_stext)
+ jiffies = jiffies_64 + 4;
++
+ SECTIONS
+ {
+-  . = 0xC0020000;
+-  _text = .;			/* Text and read-only data */
+-  .text : {
++  . = IMAGE_START;
++  .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
++  	_text = .;			/* Text and read-only data */
+ 	*(.text.head)
++  } :text = 0x4e75
++
++  .text : AT(ADDR(.text) - LOAD_OFFSET) {
+ 	TEXT_TEXT
+ 	SCHED_TEXT
+ 	LOCK_TEXT
+ 	*(.fixup)
+ 	*(.gnu.warning)
+-	} :text = 0x4e75
+-
++  } :text = 0x4e75
+   _etext = .;			/* End of text section */
+ 
+   . = ALIGN(16);
+-  __start___ex_table = .;
+-  __ex_table : { *(__ex_table) }
+-  __stop___ex_table = .;
++  __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
++	__start___ex_table = .;
++	*(__ex_table)
++	__stop___ex_table = .;
++  }
+ 
+   RODATA
+ 
+-  .data : {			/* Data */
++  . = ALIGN(8192);
++  .data : AT(ADDR(.data) - LOAD_OFFSET) {	/* Data */
+ 	DATA_DATA
+ 	CONSTRUCTORS
+-	}
++  } :data
+ 
+-  .bss : { *(.bss) }		/* BSS */
++  .bss : AT(ADDR(.bss) - LOAD_OFFSET) {		/* BSS */
++	*(.bss)
++  }
+ 
+   . = ALIGN(16);
+-  .data.cacheline_aligned : { *(.data.cacheline_aligned) } :data
++  .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET ) {
++	*(.data.cacheline_aligned)
++  } :data
+ 
+   _edata = .;			/* End of data section */
+ 
+   . = ALIGN(8192);		/* Initrd */
+-  __init_begin = .;
+-  .init.text : {
++  .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
++  	__init_begin = .;
+ 	_sinittext = .;
+ 	*(.init.text)
+ 	_einittext = .;
+   }
+-  .init.data : { *(.init.data) }
++
++  .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
++	*(.init.data)
++  }
++
+   . = ALIGN(16);
+-  __setup_start = .;
+-  .init.setup : { *(.init.setup) }
+-  __setup_end = .;
+-  __initcall_start = .;
+-  .initcall.init : {
++  .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
++	__setup_start = .;
++	*(.init.setup)
++  	__setup_end = .;
++  }
++
++  .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
++	__initcall_start = .;
+ 	INITCALLS
++	__initcall_end = .;
+   }
+-  __initcall_end = .;
+-  __con_initcall_start = .;
+-  .con_initcall.init : { *(.con_initcall.init) }
+-  __con_initcall_end = .;
++
++  .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
++	__con_initcall_start = .;
++	*(.con_initcall.init)
++	__con_initcall_end = .;
++  }
++
+   SECURITY_INIT
++
+ #ifdef CONFIG_BLK_DEV_INITRD
+   . = ALIGN(8192);
+-  __initramfs_start = .;
+-  .init.ramfs : { *(.init.ramfs) }
+-  __initramfs_end = .;
++  .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
++	__initramfs_start = .;
++	*(.init.ramfs)
++	__initramfs_end = .;
++  }
+ #endif
++
+   . = ALIGN(8192);
+   __init_end = .;
+ 
+-  .data.init_task : { *(.data.init_task) }	/* The initial task and kernel stack */
++  .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
++	*(.data.init_task)	/* The initial task and kernel stack */
++  }
+ 
+   _end = . ;
+ 
+@@ -79,14 +118,8 @@ SECTIONS
+ 	*(.exit.text)
+ 	*(.exit.data)
+ 	*(.exitcall.exit)
+-	}
++  }
+ 
+   /* Stabs debugging sections.  */
+-  .stab 0 : { *(.stab) }
+-  .stabstr 0 : { *(.stabstr) }
+-  .stab.excl 0 : { *(.stab.excl) }
+-  .stab.exclstr 0 : { *(.stab.exclstr) }
+-  .stab.index 0 : { *(.stab.index) }
+-  .stab.indexstr 0 : { *(.stab.indexstr) }
+-  .comment 0 : { *(.comment) }
++  STABS_DEBUG
+ }
+--- a/arch/m68k/kernel/vmlinux.lds.S
++++ b/arch/m68k/kernel/vmlinux.lds.S
+@@ -1,6 +1,7 @@
+ PHDRS
+ {
+-  text PT_LOAD FILEHDR PHDRS FLAGS (7);
++  headers PT_PHDR PHDRS ;
++  text PT_LOAD FILEHDR PHDRS FLAGS (5);
+   data PT_LOAD FLAGS (7);
+ }
+ #ifdef CONFIG_SUN3
diff --git a/target/linux/coldfire/patches/019-m5445x_spi.patch b/target/linux/coldfire/patches/019-m5445x_spi.patch
new file mode 100644
index 0000000000..49b83e0b18
--- /dev/null
+++ b/target/linux/coldfire/patches/019-m5445x_spi.patch
@@ -0,0 +1,3345 @@
+From bc755a3b8859e7307a8b10f39ca4cb6401c51987 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 27 Nov 2007 14:39:37 -0700
+Subject: [PATCH] Add M5445x SPI support.
+
+LTIBName: m5445x-spi
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/configs/m54455evb_defconfig |   24 +-
+ drivers/spi/Kconfig                   |   36 +
+ drivers/spi/Makefile                  |    4 +
+ drivers/spi/coldfire_edma.c           |  358 ++++++++
+ drivers/spi/spi-m5445x.c              |  156 ++++
+ drivers/spi/spi_coldfire.c            | 1552 +++++++++++++++++++++++++++++++++
+ drivers/spi/ssi_audio.c               |  906 +++++++++++++++++++
+ include/asm-m68k/coldfire_edma.h      |  101 ++-
+ include/linux/spi/mcfqspi.h           |   80 ++
+ 9 files changed, 3196 insertions(+), 21 deletions(-)
+ create mode 100644 drivers/spi/coldfire_edma.c
+ create mode 100644 drivers/spi/spi-m5445x.c
+ create mode 100644 drivers/spi/spi_coldfire.c
+ create mode 100644 drivers/spi/ssi_audio.c
+ create mode 100644 include/linux/spi/mcfqspi.h
+
+--- a/arch/m68k/configs/m54455evb_defconfig
++++ b/arch/m68k/configs/m54455evb_defconfig
+@@ -321,6 +321,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+ #
+ # Self-contained MTD device drivers
+ #
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
+@@ -497,8 +499,26 @@ CONFIG_UNIX98_PTYS=y
+ #
+ # SPI support
+ #
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_COLDFIRE_EDMA=y
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_BITBANG is not set
++CONFIG_SPI_COLDFIRE=y
++CONFIG_SPI_COLDFIRE_DSPI_EDMA=y
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++CONFIG_SPI_COLDFIRE_SSI_AUDIO=y
++# CONFIG_SSIAUDIO_USE_EDMA is not set
+ # CONFIG_W1 is not set
+ # CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -35,6 +35,15 @@ config SPI_DEBUG
+ 	  Say "yes" to enable debug messaging (like dev_dbg and pr_debug),
+ 	  sysfs, and debugfs support in SPI controller and protocol drivers.
+ 
++config COLDFIRE_EDMA
++	tristate "Coldfire eDMA"
++	depends on COLDFIRE && EXPERIMENTAL
++	help
++	    Support for Coldfire eDMA controller. Required for example
++	    by SSI audio device driver.
++
++
++
+ #
+ # MASTER side ... talking to discrete SPI slave chips including microcontrollers
+ #
+@@ -113,6 +122,21 @@ config SPI_GPIO
+ 
+ 	  If unsure, say N.
+ 
++config SPI_COLDFIRE
++	tristate "Coldfire QSPI/DSPI SPI Master"
++	depends on SPI_MASTER && COLDFIRE && EXPERIMENTAL
++	help
++	  SPI driver for Freescale Coldfire QSPI module in master mode.
++	  Tested with the 5282 processor, but should also work with other
++	  Coldfire variants.
++
++config SPI_COLDFIRE_DSPI_EDMA	  
++	boolean "Coldfire DSPI master driver uses eDMA"
++	depends on SPI_MASTER && COLDFIRE && SPI_COLDFIRE && EXPERIMENTAL && COLDFIRE_EDMA
++	default n
++	help
++	  Say "yes" if you want DSPI master driver to use eDMA for transfers.
++
+ config SPI_IMX
+ 	tristate "Freescale iMX SPI controller"
+ 	depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
+@@ -255,6 +279,18 @@ config SPI_TLE62X0
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
++config SPI_COLDFIRE_SSI_AUDIO
++	tristate "Coldfire SSI AUDIO"
++	depends on SPI_MASTER && SPI_COLDFIRE && EXPERIMENTAL
++	help
++	  SSI audio device driver
++
++config SSIAUDIO_USE_EDMA
++	boolean "Coldfire DSPI master driver uses eDMA"
++	default y
++	depends on EXPERIMENTAL && COLDFIRE_EDMA && SPI_COLDFIRE_SSI_AUDIO
++	help
++	  Say "yes" if you want SSI audio driver to use eDMA for SSI transfers.
+ 
+ # (slave support would go here)
+ 
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -6,6 +6,8 @@ ifeq ($(CONFIG_SPI_DEBUG),y)
+ EXTRA_CFLAGS += -DDEBUG
+ endif
+ 
++obj-$(CONFIG_COLDFIRE_EDMA)		+= coldfire_edma.o
++
+ # small core, mostly translating board-specific
+ # config declarations into driver model code
+ obj-$(CONFIG_SPI_MASTER)		+= spi.o
+@@ -16,6 +18,7 @@ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.
+ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
+ obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
+ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
++obj-$(CONFIG_SPI_COLDFIRE)		+= spi_coldfire.o spi-m5445x.o
+ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
+ obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
+@@ -35,6 +38,7 @@ obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.
+ obj-$(CONFIG_SPI_AT25)		+= at25.o
+ obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
+ obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
++obj-$(CONFIG_SPI_COLDFIRE_SSI_AUDIO)	+= ssi_audio.o
+ # 	... add above this line ...
+ 
+ # SPI slave controller drivers (upstream link)
+--- /dev/null
++++ b/drivers/spi/coldfire_edma.c
+@@ -0,0 +1,358 @@
++/*
++ *
++ * coldfire_edma.c - eDMA driver for Coldfire MCF5445x
++ *
++ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <asm/virtconvert.h>
++#include <asm/coldfire.h>
++#include <linux/fs.h>
++#include <linux/cdev.h>
++#include <linux/seq_file.h>
++#include <linux/proc_fs.h>
++#include <asm/mcf5445x_edma.h>
++#include <asm/mcf5445x_intc.h>
++#include <asm/coldfire_edma.h>
++
++
++/* callback handler data for each TCD */
++struct edma_isr_record {
++	edma_irq_handler irq_handler;       /* interrupt handler */
++	edma_error_handler error_handler;	/* error interrupt handler */
++	void* dev;							/* device used for the channel */
++	int  allocated;						/* busy flag */
++	spinlock_t *lock;					/* spin lock (if needs to be locked in interrupt) */
++	const char* device_id;				/* device id string, used in proc file system */
++};
++
++/* device structure */
++struct coldfire_edma_dev {
++	struct cdev cdev; 			/* character device */
++	struct edma_isr_record dma_interrupt_handlers[EDMA_CHANNELS]; /* channel handlers */
++};
++
++/* allocated major device number */
++static int coldfire_dma_major;
++/* device driver structure */
++static struct coldfire_edma_dev* devp = NULL;
++
++/* device driver file operations */
++struct file_operations coldfire_edma_fops = {
++	.owner = THIS_MODULE,
++};
++
++/* eDMA channel interrupt handler */
++static int dmaisr(int irq, void *dev_id)
++{
++	int channel = irq - EDMA_INT_CONTROLLER_BASE - EDMA_INT_CHANNEL_BASE;
++	int result = IRQ_HANDLED;
++
++	if (devp!=NULL && devp->dma_interrupt_handlers[channel].lock) {
++		spin_lock(devp->dma_interrupt_handlers[channel].lock);
++	}
++
++	if (devp!=NULL && devp->dma_interrupt_handlers[channel].irq_handler) {
++		result = devp->dma_interrupt_handlers[channel].irq_handler(channel,
++							devp->dma_interrupt_handlers[channel].dev);
++	} else {
++		confirm_edma_interrupt_handled(channel);
++		printk(EDMA_DRIVER_NAME ": No handler for DMA channel %d\n", channel);
++	}
++
++   	if (devp!=NULL && devp->dma_interrupt_handlers[channel].lock) {
++		spin_unlock(devp->dma_interrupt_handlers[channel].lock);
++	}
++
++	return result;
++}
++
++/* eDMA error interrupt handler */
++static int dma_error_isr(int irq, void* dev_id)
++{
++	u16 err;
++	int i;
++
++	err = MCF_EDMA_ERR;
++	for (i=0;i<EDMA_CHANNELS;i++) {
++		if (err & (1<<i)) {
++			if (devp!=NULL && devp->dma_interrupt_handlers[i].error_handler) {
++				devp->dma_interrupt_handlers[i].error_handler(i, devp->dma_interrupt_handlers[i].dev);
++			} else {
++				printk(KERN_WARNING EDMA_DRIVER_NAME ": DMA error on channel %d\n", i);
++			}
++		}
++	}
++
++	MCF_EDMA_CERR = MCF_EDMA_CERR_CAER;
++	return IRQ_HANDLED;
++}
++
++/* sets channel parameters */
++void set_edma_params(int channel, u32 source, u32 dest,
++					 u32 attr, u32 soff, u32 nbytes, u32 slast,
++					 u32 citer, u32 biter, u32 doff, u32 dlast_sga,
++					 int major_int, int disable_req)
++{
++
++	if (channel<0 || channel>EDMA_CHANNELS)
++		return;
++
++	MCF_EDMA_TCD_SADDR(channel) = source;
++	MCF_EDMA_TCD_DADDR(channel) = dest;
++	MCF_EDMA_TCD_ATTR(channel) = attr;
++	MCF_EDMA_TCD_SOFF(channel) = MCF_EDMA_TCD_SOFF_SOFF(soff);
++	MCF_EDMA_TCD_NBYTES(channel) = MCF_EDMA_TCD_NBYTES_NBYTES(nbytes);
++	MCF_EDMA_TCD_SLAST(channel) = MCF_EDMA_TCD_SLAST_SLAST(slast);
++	MCF_EDMA_TCD_CITER(channel) = MCF_EDMA_TCD_CITER_CITER(citer);
++	MCF_EDMA_TCD_BITER(channel)=MCF_EDMA_TCD_BITER_BITER(biter);
++	MCF_EDMA_TCD_DOFF(channel) = MCF_EDMA_TCD_DOFF_DOFF(doff);
++	MCF_EDMA_TCD_DLAST_SGA(channel) = MCF_EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga);
++	/* interrupt at the end of major loop */
++	if (major_int) {
++		MCF_EDMA_TCD_CSR(channel) |= MCF_EDMA_TCD_CSR_INT_MAJOR;
++	} else {
++		MCF_EDMA_TCD_CSR(channel) &= ~MCF_EDMA_TCD_CSR_INT_MAJOR;
++	}
++	/* disable request at the end of major loop of transfer or not*/
++	if (disable_req) {
++		MCF_EDMA_TCD_CSR(channel) |= MCF_EDMA_TCD_CSR_D_REQ;
++	} else {
++		MCF_EDMA_TCD_CSR(channel) &= ~MCF_EDMA_TCD_CSR_D_REQ;
++	}
++
++}
++EXPORT_SYMBOL(set_edma_params);
++
++/* init eDMA controller */
++void init_edma(void)
++{
++	MCF_EDMA_CR = 0;
++}
++EXPORT_SYMBOL(init_edma);
++
++/* request eDMA channel */
++int request_edma_channel(int channel,
++						edma_irq_handler handler,
++						edma_error_handler error_handler,
++						void* dev,
++						spinlock_t *lock,
++						const char* device_id )
++{
++	if (devp!=NULL && channel>=0 && channel<=EDMA_CHANNELS) {
++		if (devp->dma_interrupt_handlers[channel].allocated) {
++			return -EBUSY;
++		}
++		devp->dma_interrupt_handlers[channel].allocated = 1;
++		devp->dma_interrupt_handlers[channel].irq_handler = handler;
++		devp->dma_interrupt_handlers[channel].error_handler = error_handler;
++		devp->dma_interrupt_handlers[channel].dev = dev;
++		devp->dma_interrupt_handlers[channel].lock = lock;
++		devp->dma_interrupt_handlers[channel].device_id = device_id;
++		return 0;
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(request_edma_channel);
++
++/* free eDMA channel */
++int free_edma_channel(int channel, void* dev)
++{
++	if (devp!=NULL && channel>=0 && channel<=EDMA_CHANNELS) {
++		if (devp->dma_interrupt_handlers[channel].allocated) {
++			if (devp->dma_interrupt_handlers[channel].dev != dev) {
++				return -EBUSY;
++			}
++			devp->dma_interrupt_handlers[channel].allocated = 0;
++			devp->dma_interrupt_handlers[channel].dev = NULL;
++			devp->dma_interrupt_handlers[channel].irq_handler = NULL;
++			devp->dma_interrupt_handlers[channel].error_handler = NULL;
++			devp->dma_interrupt_handlers[channel].lock = NULL;
++		}
++		return 0;
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(free_edma_channel);
++
++/* clean-up device driver allocated resources */
++static void coldfire_edma_cleanup(void)
++{
++	dev_t devno;
++	int i;
++
++	/* free interrupts/memory */
++	if (devp) {
++		for (i=0;i<EDMA_CHANNELS;i++)
++		{
++			MCF_INTC0_SIMR = EDMA_INT_CHANNEL_BASE+i;
++			free_irq(EDMA_INT_CHANNEL_BASE+EDMA_INT_CONTROLLER_BASE+i,	devp);
++		}
++		MCF_INTC0_SIMR = EDMA_INT_CHANNEL_BASE+EDMA_CHANNELS;
++		free_irq(EDMA_INT_CHANNEL_BASE+EDMA_INT_CONTROLLER_BASE+EDMA_CHANNELS, devp);
++		cdev_del(&devp->cdev);
++		kfree(devp);
++	}
++
++	/* unregister character device */
++	devno = MKDEV(coldfire_dma_major, 0);
++	unregister_chrdev_region(devno, 1);
++}
++
++#ifdef CONFIG_PROC_FS
++/* proc file system support */
++
++#define FREE_CHANNEL "free"
++#define DEVICE_UNKNOWN "device unknown"
++
++static int proc_edma_show(struct seq_file *m, void *v)
++{
++	int i;
++
++	if (devp==NULL) return 0;
++
++	for (i = 0 ; i < EDMA_CHANNELS ; i++) {
++		if (devp->dma_interrupt_handlers[i].allocated) {
++			if (devp->dma_interrupt_handlers[i].device_id)
++		    	seq_printf(m, "%2d: %s\n", i, devp->dma_interrupt_handlers[i].device_id);
++			else
++				seq_printf(m, "%2d: %s\n", i, DEVICE_UNKNOWN);
++		} else {
++			seq_printf(m, "%2d: %s\n", i, FREE_CHANNEL);
++		}
++	}
++	return 0;
++}
++
++static int proc_edma_open(struct inode *inode, struct file *file)
++{
++	return single_open(file, proc_edma_show, NULL);
++}
++
++static const struct file_operations proc_edma_operations = {
++	.open		= proc_edma_open,
++	.read		= seq_read,
++	.llseek		= seq_lseek,
++	.release	= single_release,
++};
++
++static int __init proc_edma_init(void)
++{
++	struct proc_dir_entry *e;
++
++	e = create_proc_entry("edma", 0, NULL);
++	if (e)
++		e->proc_fops = &proc_edma_operations;
++
++	return 0;
++}
++
++#endif
++
++/* initializes device driver */
++static int __init coldfire_edma_init(void)
++{
++	dev_t dev;
++	int result;
++	int i;
++
++	/* allocate free major number */
++	result = alloc_chrdev_region(&dev, DMA_DEV_MINOR, 1, EDMA_DRIVER_NAME);
++	if (result<0) {
++		printk(KERN_WARNING EDMA_DRIVER_NAME": can't get major %d\n", result);
++		return result;
++	}
++	coldfire_dma_major = MAJOR(dev);
++
++	/* allocate device driver structure */
++	devp = kmalloc(sizeof(struct coldfire_edma_dev), GFP_KERNEL);
++	if (!devp) {
++		result = -ENOMEM;
++		goto fail;
++	}
++
++	/* init handlers (no handlers for beggining) */
++   	for (i=0;i<EDMA_CHANNELS;i++) {
++		devp->dma_interrupt_handlers[i].irq_handler = NULL;
++		devp->dma_interrupt_handlers[i].error_handler = NULL;
++		devp->dma_interrupt_handlers[i].dev = NULL;
++		devp->dma_interrupt_handlers[i].allocated = 0;
++		devp->dma_interrupt_handlers[i].lock = NULL;
++		devp->dma_interrupt_handlers[i].device_id = NULL;
++	}
++
++    /* register char device */
++	cdev_init(&devp->cdev, &coldfire_edma_fops);
++	devp->cdev.owner = THIS_MODULE;
++	devp->cdev.ops = &coldfire_edma_fops;
++	result = cdev_add(&devp->cdev, dev, 1);
++	if (result) {
++		printk(KERN_NOTICE EDMA_DRIVER_NAME": Error %d adding coldfire-dma device\n", result);
++		result = -ENODEV;
++		goto fail;
++	}
++
++	/* request/enable irq for each eDMA channel */
++	for (i=0;i<EDMA_CHANNELS;i++)
++	{
++		result = request_irq(EDMA_INT_CHANNEL_BASE+EDMA_INT_CONTROLLER_BASE+i,
++			dmaisr, SA_INTERRUPT, EDMA_DRIVER_NAME, devp);
++		if (result) {
++			printk(KERN_WARNING EDMA_DRIVER_NAME": Cannot request irq %d\n",
++				EDMA_INT_CHANNEL_BASE+EDMA_INT_CONTROLLER_BASE+i);
++			result = -EBUSY;
++			goto fail;
++		}
++
++		MCF_INTC0_ICR(EDMA_INT_CHANNEL_BASE+i) = EDMA_IRQ_LEVEL;
++		MCF_INTC0_CIMR = EDMA_INT_CHANNEL_BASE+i;
++
++	}
++
++    /* request error interrupt */
++	result = request_irq(EDMA_INT_CHANNEL_BASE + EDMA_INT_CONTROLLER_BASE + EDMA_CHANNELS,
++				dma_error_isr, SA_INTERRUPT, EDMA_DRIVER_NAME, devp);
++	if (result) {
++		printk(KERN_WARNING EDMA_DRIVER_NAME": Cannot request irq %d\n",
++				EDMA_INT_CHANNEL_BASE+EDMA_INT_CONTROLLER_BASE+EDMA_CHANNELS);
++		result = -EBUSY;
++		goto fail;
++	}
++
++	/* enable error interrupt in interrupt controller */
++	MCF_INTC0_ICR(EDMA_INT_CHANNEL_BASE+EDMA_CHANNELS) = EDMA_IRQ_LEVEL;
++	MCF_INTC0_CIMR = EDMA_INT_CHANNEL_BASE+EDMA_CHANNELS;
++
++#ifdef CONFIG_PROC_FS
++	proc_edma_init();
++#endif
++
++	printk(EDMA_DRIVER_NAME ": initialized successfully\n");
++
++	return 0;
++fail:
++	coldfire_edma_cleanup();
++	return result;
++
++}
++
++static void __exit coldfire_edma_exit(void)
++{
++	coldfire_edma_cleanup();
++}
++
++module_init(coldfire_edma_init);
++module_exit(coldfire_edma_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Yaroslav Vinogradov, Freescale Inc.");
++MODULE_DESCRIPTION("eDMA library for Coldfire 5445x");
+--- /dev/null
++++ b/drivers/spi/spi-m5445x.c
+@@ -0,0 +1,156 @@
++/***************************************************************************/
++/*
++ *	linux/arch/m68k/coldfire/spi-m5445x.c
++ *
++ *	Sub-architcture dependant initialization code for the Freescale
++ *	5445x SPI module
++ *
++ *	Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
++ *	Copyright Freescale Semiconductor, Inc 2007
++ *
++ *	This program is free software; you can redistribute it and/or modify
++ *	it under the terms of the GNU General Public License as published by
++ *	the Free Software Foundation; either version 2 of the License, or 
++ *	(at your option) any later version.
++ */
++/***************************************************************************/
++
++
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/param.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++
++#include <asm/dma.h>
++#include <asm/traps.h>
++#include <asm/machdep.h>
++#include <asm/coldfire.h>
++#include <asm/mcfsim.h>
++#include <asm/mcfqspi.h>
++#include <asm/mcf5445x_gpio.h>
++
++#define SPI_NUM_CHIPSELECTS 	0x10
++#define SPI_PAR_VAL  (0 | MCF_GPIO_PAR_DSPI_PCS5_PCS5 | MCF_GPIO_PAR_DSPI_PCS2_PCS2 \
++		| MCF_GPIO_PAR_DSPI_PCS1_PCS1 | MCF_GPIO_PAR_DSPI_PCS0_PCS0 | MCF_GPIO_PAR_DSPI_SIN_SIN \
++		| MCF_GPIO_PAR_DSPI_SOUT_SOUT | MCF_GPIO_PAR_DSPI_SCK_SCK)
++
++#define MCF5445x_DSPI_IRQ_SOURCE	(31)
++#define MCF5445x_DSPI_IRQ_VECTOR	(64 + MCF5445x_DSPI_IRQ_SOURCE)
++
++#define MCF5445x_DSPI_PAR	(0xFC0A4063)
++#define MCF5445x_DSPI_MCR	(0xFC05C000)
++#define MCF5445x_INTC0_ICR	(0xFC048040)
++#define MCF5445x_INTC0_IMRL	(0xFC04800C)
++
++
++#define M5445x_AUDIO_IRQ_SOURCE 49
++#define M5445x_AUDIO_IRQ_VECTOR (128+M5445x_AUDIO_IRQ_SOURCE)
++#define M5445x_AUDIO_IRQ_LEVEL	4
++
++void coldfire_qspi_cs_control(u8 cs, u8 command)
++{
++}
++
++#if defined(CONFIG_SPI_COLDFIRE_SSI_AUDIO)
++static struct coldfire_spi_chip ssi_audio_chip_info = {
++	.mode = SPI_MODE_0,
++	.bits_per_word = 16,
++	.del_cs_to_clk = 16,
++	.del_after_trans = 16,
++	.void_write_data = 0
++};
++
++#endif
++
++static struct spi_board_info spi_board_info[] = {
++
++#if defined(CONFIG_SPI_COLDFIRE_SSI_AUDIO)
++	{
++		.modalias = "ssi_audio",
++		.max_speed_hz = 300000,
++		.bus_num = 1,
++		.chip_select = 5,
++		.irq = M5445x_AUDIO_IRQ_VECTOR,
++		.platform_data = NULL,
++		.controller_data = &ssi_audio_chip_info
++	}
++#endif
++
++};
++
++static struct coldfire_spi_master coldfire_master_info = {
++	.bus_num = 1,
++	.num_chipselect = SPI_NUM_CHIPSELECTS,
++	.irq_source = MCF5445x_DSPI_IRQ_SOURCE,
++	.irq_vector = MCF5445x_DSPI_IRQ_VECTOR,
++	.irq_mask = (0x01 << MCF5445x_DSPI_IRQ_SOURCE),
++	.irq_lp = 0x2,  /* Level */
++	.par_val = SPI_PAR_VAL,
++//	.par_val16 = SPI_PAR_VAL,
++	.cs_control = coldfire_qspi_cs_control,
++};
++
++static struct resource coldfire_spi_resources[] = {
++	[0] = {
++		.name = "qspi-par",
++		.start = MCF5445x_DSPI_PAR,
++		.end = MCF5445x_DSPI_PAR,
++		.flags = IORESOURCE_MEM
++	},
++
++	[1] = {
++		.name = "qspi-module",
++		.start = MCF5445x_DSPI_MCR,
++		.end = MCF5445x_DSPI_MCR + 0xB8,
++		.flags = IORESOURCE_MEM
++	},
++
++	[2] = {
++		.name = "qspi-int-level",
++		.start = MCF5445x_INTC0_ICR + MCF5445x_DSPI_IRQ_SOURCE,
++		.end = MCF5445x_INTC0_ICR + MCF5445x_DSPI_IRQ_SOURCE,
++		.flags = IORESOURCE_MEM
++	},
++
++	[3] = {
++		.name = "qspi-int-mask",
++		.start = MCF5445x_INTC0_IMRL,
++		.end = MCF5445x_INTC0_IMRL,
++		.flags = IORESOURCE_MEM
++	}
++};
++
++static struct platform_device coldfire_spi = {
++	.name = "spi_coldfire", //"coldfire-qspi",
++	.id = -1,
++	.resource = coldfire_spi_resources,
++	.num_resources = ARRAY_SIZE(coldfire_spi_resources),
++	.dev = {
++		.platform_data = &coldfire_master_info,
++	}
++};
++
++static int __init spi_dev_init(void)
++{
++	int retval = 0;
++	
++	retval = platform_device_register(&coldfire_spi);
++
++	if (retval < 0) {
++		printk(KERN_ERR "SPI-m5445x: platform_device_register failed with code=%d\n", retval);
++		goto out;
++	}
++
++	if (ARRAY_SIZE(spi_board_info))
++		retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
++
++
++out:
++	return retval;
++}
++
++arch_initcall(spi_dev_init);
+--- /dev/null
++++ b/drivers/spi/spi_coldfire.c
+@@ -0,0 +1,1552 @@
++/****************************************************************************/
++
++/*
++ *	spi_coldfire.c - Master QSPI/DSPI controller for the ColdFire processors
++ *
++ *	(C) Copyright 2005, Intec Automation,
++ *			    Mike Lavender (mike@steroidmicros)
++ *
++ *	(C) Copyright 2007, Freescale Inc,
++ *			    Yaroslav Vinogradov (yaroslav.vinogradov@freescale.com)
++ *
++
++     This program is free software; you can redistribute it and/or modify
++     it under the terms of the GNU General Public License as published by
++     the Free Software Foundation; either version 2 of the License, or
++     (at your option) any later version.
++
++     This program is distributed in the hope that it will be useful,
++     but WITHOUT ANY WARRANTY; without even the implied warranty of
++     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++     GNU General Public License for more details.
++
++     You should have received a copy of the GNU General Public License
++     along with this program; if not, write to the Free Software
++     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
++/* ------------------------------------------------------------------------- */
++
++
++/****************************************************************************/
++
++/*
++ * Includes
++ */
++
++#include <linux/autoconf.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/workqueue.h>
++#include <linux/delay.h>
++
++#include <asm/delay.h>
++#include <asm/mcfsim.h>
++#include <asm/mcfqspi.h>
++#include <asm/coldfire.h>
++#include <asm/virtconvert.h>
++
++#if defined(CONFIG_M54455)
++	#define SPI_DSPI
++	#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
++		#define SPI_DSPI_EDMA
++		#ifdef CONFIG_MMU
++			#define SPI_USE_MMU
++		#endif
++	#endif
++#endif
++
++#ifdef SPI_DSPI
++#include <asm/mcf5445x_dspi.h>
++
++
++#endif
++
++#if defined(SPI_DSPI_EDMA)
++
++/* edma buffer size in transfer units (32bits) */
++#define EDMA_BUFFER_SIZE	(PAGE_SIZE/4)
++#define EDMA_BUFSIZE_KMALLOC (EDMA_BUFFER_SIZE*4)
++
++#define DSPI_DMA_RX_TCD	12
++#define DSPI_DMA_TX_TCD 13
++
++
++#include <asm/coldfire_edma.h>
++#include <asm/mcf5445x_edma.h>
++#endif
++
++
++MODULE_AUTHOR("Mike Lavender");
++MODULE_DESCRIPTION("ColdFire QSPI Contoller");
++MODULE_LICENSE("GPL");
++
++#define DRIVER_NAME "Coldfire QSPI/DSPI"
++
++/****************************************************************************/
++
++/*
++ * Local constants and macros
++ */
++
++#define QSPI_RAM_SIZE		0x10    /* 16 word table */
++
++#define QSPI_TRANSMIT_RAM 	0x00
++#define QSPI_RECEIVE_RAM  	0x10
++#define QSPI_COMMAND_RAM  	0x20
++
++#define QSPI_COMMAND		0x7000  /* 15:   X = Continuous CS
++					 * 14:   1 = Get BITSE from QMR[BITS]
++					 * 13:   1 = Get DT    from QDLYR[DTL]
++					 * 12:   1 = Get DSK   from QDLYR[QCD]
++					 * 8-11: XXXX = next 4 bytes for CS
++					 * 0-7:  0000 0000 Reserved
++					 */
++
++#define QIR_WCEF                0x0008  /* write collison */
++#define QIR_ABRT                0x0004  /* abort */
++#define QIR_SPIF                0x0001  /* finished */
++
++#define QIR_WCEFE              	0x0800
++#define QIR_ABRTE              	0x0400
++#define QIR_SPIFE              	0x0100
++
++#define QIR_WCEFB              	0x8000
++#define QIR_ABRTB              	0x4000
++#define QIR_ABRTL              	0x1000
++
++#define QMR_BITS             	0x3C00
++#define QMR_BITS_8              0x2000
++
++#define QCR_CONT              	0x8000
++
++#define QDLYR_SPE		0x8000
++
++#define QWR_ENDQP_MASK		0x0F00
++#define QWR_CSIV		0x1000  /* 1 = active low chip selects */
++
++
++#define START_STATE ((void*)0)
++#define RUNNING_STATE ((void*)1)
++#define DONE_STATE ((void*)2)
++#define ERROR_STATE ((void*)-1)
++
++#define QUEUE_RUNNING 0
++#define QUEUE_STOPPED 1
++
++/****************************************************************************/
++
++/*
++ * Local Data Structures
++ */
++
++struct transfer_state {
++	u32 index;
++	u32 len;
++	void *tx;
++	void *tx_end;
++	void *rx;
++	void *rx_end;
++	char flags;
++#define TRAN_STATE_RX_VOID	   0x01
++#define TRAN_STATE_TX_VOID 	   0x02
++#define TRAN_STATE_WORD_ODD_NUM	   0x04
++	u8 cs;
++	u16 void_write_data;
++	unsigned cs_change:1;
++};
++
++typedef struct {
++	unsigned master:1;
++	unsigned dohie:1;
++	unsigned bits:4;
++	unsigned cpol:1;
++	unsigned cpha:1;
++	unsigned baud:8;
++} QMR;
++
++typedef struct {
++	unsigned spe:1;
++	unsigned qcd:7;
++	unsigned dtl:8;
++} QDLYR;
++
++typedef struct {
++	unsigned halt:1;
++	unsigned wren:1;
++	unsigned wrto:1;
++	unsigned csiv:1;
++	unsigned endqp:4;
++	unsigned cptqp:4;
++	unsigned newqp:4;
++} QWR;
++
++
++typedef struct {
++	unsigned master:1;
++	unsigned cont_scke:1;
++	unsigned dconf:2;
++	unsigned frz:1;
++	unsigned mtfe:1;
++	unsigned pcsse:1;
++	unsigned rooe:1;
++	unsigned pcsis:8;
++	unsigned reserved15:1;
++	unsigned mdis:1;
++	unsigned dis_tx:1;
++	unsigned dis_rxf:1;
++	unsigned clr_tx:1;
++	unsigned clr_rxf:1;
++	unsigned smpl_pt:2;
++	unsigned reserved71:7;
++	unsigned halt:1;
++} DSPI_MCR;
++
++typedef struct {
++	unsigned dbr:1;
++	unsigned fmsz:4;
++	unsigned cpol:1;
++	unsigned cpha:1;
++	unsigned lsbfe:1;
++	unsigned pcssck:2;
++	unsigned pasc:2;
++	unsigned pdt:2;
++	unsigned pbr:2;
++	unsigned cssck:4;
++	unsigned asc:4;
++	unsigned dt:4;
++	unsigned br:4;
++} DSPI_CTAR;
++
++struct chip_data {
++#if defined(SPI_DSPI)
++	/* dspi data */
++	union {
++		u32 mcr_val;
++		DSPI_MCR mcr;
++	};
++	union {
++		u32 ctar_val;
++		DSPI_CTAR ctar;
++	};
++#else
++	union {
++		u16 qmr_val;
++		QMR qmr;
++	};
++	union {
++		u16 qdlyr_val;
++		QDLYR qdlyr;
++	};
++	union {
++		u16 qwr_val;
++		QWR qwr;
++	};
++#endif
++
++	u16 void_write_data;
++};
++
++
++struct driver_data {
++	/* Driver model hookup */
++	struct platform_device *pdev;
++
++	/* SPI framework hookup */
++	struct spi_master *master;
++
++	/* Driver message queue */
++	struct workqueue_struct	*workqueue;
++	struct work_struct pump_messages;
++	spinlock_t lock;
++	struct list_head queue;
++	int busy;
++	int run;
++
++	/* Message Transfer pump */
++	struct tasklet_struct pump_transfers;
++
++	/* Current message transfer state info */
++	struct spi_message* cur_msg;
++	struct spi_transfer* cur_transfer;
++	struct chip_data *cur_chip;
++	size_t len;
++	void *tx;
++	void *tx_end;
++	void *rx;
++	void *rx_end;
++	char flags;
++#define TRAN_STATE_RX_VOID	   0x01
++#define TRAN_STATE_TX_VOID 	   0x02
++#define TRAN_STATE_WORD_ODD_NUM	   0x04
++	u8 cs;
++	u16 void_write_data;
++	unsigned cs_change:1;
++
++	u32 trans_cnt;
++	u32 wce_cnt;
++	u32 abrt_cnt;
++#if defined(SPI_DSPI)
++	u32 *mcr;			/* DSPI MCR register */
++	u32 *ctar;			/* DSPI CTAR register */
++	u32 *dspi_dtfr;		/* DSPI DTFR register */
++	u32 *dspi_drfr;		/* DSPI DRFR register */
++	u32 *dspi_rser;		/* DSPI RSER register */
++	u32 *dspi_sr;		/* DSPI status register */
++	u8	dspi_ctas;		/* DSPI CTAS value*/
++	
++#if defined(SPI_DSPI_EDMA)
++	void*	edma_tx_buf;
++	void*	edma_rx_buf;
++#endif
++	
++		
++#else
++ 	u16 *qmr;          /* QSPI mode register      */
++ 	u16 *qdlyr;        /* QSPI delay register     */
++ 	u16 *qwr;	   /* QSPI wrap register      */
++ 	u16 *qir;          /* QSPI interrupt register */
++ 	u16 *qar;          /* QSPI address register   */
++ 	u16 *qdr;          /* QSPI data register      */
++ 	u16 *qcr;	   /* QSPI command register   */
++#endif
++ 	u8  *par;	   /* Pin assignment register */
++ 	u8  *int_icr;	   /* Interrupt level and priority register */
++ 	u32 *int_mr;       /* Interrupt mask register */
++ 	void (*cs_control)(u8 cs, u8 command);
++};
++
++#define DSPI_CS(cs) ((1<<(cs))<<16)
++
++
++/****************************************************************************/
++
++/*
++ * SPI local functions
++ */
++
++//#define SPI_COLDFIRE_DEBUG
++
++static void *next_transfer(struct driver_data *drv_data)
++{
++	struct spi_message *msg = drv_data->cur_msg;
++	struct spi_transfer *trans = drv_data->cur_transfer;
++
++	/* Move to next transfer */
++	if (trans->transfer_list.next != &msg->transfers) {
++		drv_data->cur_transfer =
++			list_entry(trans->transfer_list.next,
++					struct spi_transfer,
++					transfer_list);
++		return RUNNING_STATE;
++	} else
++		return DONE_STATE;
++}
++
++
++#define DSPI_BITS MCF_DSPI_DCTAR_FMSZ(15)
++#define DSPI_BITS_16 MCF_DSPI_DCTAR_FMSZ(15)
++#define DSPI_BITS_8 MCF_DSPI_DCTAR_FMSZ(7)
++#define DSPI_FIFO_SIZE 16
++
++static inline int is_word_transfer(struct driver_data *drv_data)
++{
++#if defined(SPI_DSPI)
++	return ((*drv_data->ctar & DSPI_BITS_16) == DSPI_BITS_8) ? 0 : 1;
++#else
++	return ((*drv_data->qmr & QMR_BITS) == QMR_BITS_8) ? 0 : 1;
++#endif
++}
++
++static void inline set_8bit_transfer_mode(struct driver_data *drv_data)
++{
++#if defined(SPI_DSPI)
++	*drv_data->ctar |= (*drv_data->ctar & ~DSPI_BITS) | DSPI_BITS_8;
++#else
++	*drv_data->qmr |= (*drv_data->qmr & ~QMR_BITS) | QMR_BITS_8;
++#endif
++}
++
++static void inline set_16bit_transfer_mode(struct driver_data *drv_data)
++{
++#if defined(SPI_DSPI)
++	*drv_data->ctar |= (*drv_data->ctar & ~DSPI_BITS) | DSPI_BITS_16;
++#else
++	*drv_data->qmr |= (*drv_data->qmr & ~QMR_BITS);
++#endif
++}
++
++static int write(struct driver_data *drv_data)
++{
++ 	int tx_count = 0;
++#ifndef SPI_DSPI
++ 	int cmd_count = 0;
++#endif
++ 	int tx_word;
++
++#if defined(SPI_DSPI)
++
++#if defined(SPI_DSPI_EDMA)
++	u32* edma_wr;
++#endif
++
++ 	u16 d16;
++ 	u8  d8;
++ 	u32 dspi_pushr;
++ 	int first = 1;
++#endif
++
++	tx_word = is_word_transfer(drv_data);
++
++	// If we are in word mode, but only have a single byte to transfer
++	// then switch to byte mode temporarily.  Will switch back at the
++	// end of the transfer.
++ 	if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1)) {
++ 		drv_data->flags |= TRAN_STATE_WORD_ODD_NUM;
++ 		set_8bit_transfer_mode(drv_data);
++ 		tx_word = 0;
++	}
++
++
++#if defined(SPI_DSPI)
++
++#if defined(SPI_DSPI_EDMA)
++	edma_wr = (u32*)(drv_data->edma_tx_buf);
++#endif
++
++
++#if defined(SPI_DSPI_EDMA)
++	while ((drv_data->tx < drv_data->tx_end) && (tx_count < EDMA_BUFFER_SIZE)) {
++#else
++	while ((drv_data->tx < drv_data->tx_end) && (tx_count < DSPI_FIFO_SIZE)) {
++#endif
++		if (tx_word) {
++			if ((drv_data->tx_end - drv_data->tx) == 1)
++				break;
++			if (!(drv_data->flags & TRAN_STATE_TX_VOID)) {
++ 				d16 = *(u16 *)drv_data->tx;
++			} else {
++ 				d16 = drv_data->void_write_data;
++			}
++
++			dspi_pushr = MCF_DSPI_DTFR_TXDATA(d16)
++						  | DSPI_CS(drv_data->cs)
++						 | MCF_DSPI_DTFR_CTAS(drv_data->dspi_ctas)
++						 //| MCF_DSPI_DTFR_CONT
++						 ;
++
++			drv_data->tx += 2;
++
++#if defined(SPI_DSPI_EDMA)
++			if (drv_data->tx == drv_data->tx_end  || tx_count==EDMA_BUFFER_SIZE-1) {
++#else			
++			if (drv_data->tx == drv_data->tx_end  || tx_count==DSPI_FIFO_SIZE-1) {
++#endif				
++				// last transfer in queue
++				dspi_pushr |= MCF_DSPI_DTFR_EOQ;
++				if (drv_data->cs_change) {
++					dspi_pushr &= ~MCF_DSPI_DTFR_CONT;
++				}
++			}
++
++			if (first) {
++				first = 0;
++				dspi_pushr |= MCF_DSPI_DTFR_CTCNT; // clear counter
++			}
++#if defined(SPI_DSPI_EDMA)
++			*edma_wr = dspi_pushr;
++			edma_wr++;			
++#else
++			*drv_data->dspi_dtfr = dspi_pushr;
++			//MCF_DSPI_DTFR = dspi_pushr;
++#endif
++
++
++		} else {
++			if (!(drv_data->flags & TRAN_STATE_TX_VOID)) {
++ 				d8 = *(u8 *)drv_data->tx;
++			} else {
++ 				d8 = *(u8 *)&drv_data->void_write_data;
++			}
++
++			dspi_pushr = MCF_DSPI_DTFR_TXDATA(d8)
++						 | DSPI_CS(drv_data->cs)
++						 /* | MCF_DSPI_DTFR_PCS5 | */
++						 | MCF_DSPI_DTFR_CTAS(drv_data->dspi_ctas)
++						 | MCF_DSPI_DTFR_CONT;
++
++			drv_data->tx++;
++
++			if (drv_data->tx == drv_data->tx_end  || tx_count==DSPI_FIFO_SIZE-1) {
++				// last transfer in queue
++				dspi_pushr |= MCF_DSPI_DTFR_EOQ;
++				if (drv_data->cs_change) {
++					dspi_pushr &= ~MCF_DSPI_DTFR_CONT;
++				}
++			}
++
++			if (first) {
++				first = 0;
++				dspi_pushr |= MCF_DSPI_DTFR_CTCNT; // clear counter
++			}
++
++#if defined(SPI_DSPI_EDMA)
++			*edma_wr = dspi_pushr;
++			edma_wr++;			
++#else			
++			*drv_data->dspi_dtfr = dspi_pushr;
++			//MCF_DSPI_DTFR = dspi_pushr;
++#endif			
++
++		}
++		tx_count++;
++	}
++
++#if defined(SPI_DSPI_EDMA)
++
++	if (tx_count>0) {
++
++		// TODO: initiate eDMA transfer
++		set_edma_params(DSPI_DMA_TX_TCD,
++#ifdef SPI_USE_MMU
++					virt_to_phys(drv_data->edma_tx_buf),
++#else
++					drv_data->edma_tx_buf,
++#endif
++					(u32)drv_data->dspi_dtfr,
++					MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
++					4,  // soff
++					4,  // nbytes
++					0,  // slast
++					tx_count, // citer
++					tx_count, // biter
++					0, // doff
++					0, // dlastsga
++					0, // major_int
++					1  // disable_req
++					);
++
++		set_edma_params(DSPI_DMA_RX_TCD,
++					(u32)drv_data->dspi_drfr,
++#ifdef SPI_USE_MMU
++					virt_to_phys(drv_data->edma_rx_buf),
++#else
++					drv_data->edma_rx_buf,
++#endif
++					MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
++					0,  // soff
++					4,  // nbytes
++					0,  // slast
++					tx_count, // citer
++					tx_count, // biter
++					4, // doff
++					0,  // dlastsga
++                    0,   // major_int
++					1	// disable_req
++					);
++
++
++		start_edma_transfer(DSPI_DMA_TX_TCD); // transmit SPI data
++		start_edma_transfer(DSPI_DMA_RX_TCD); // receive SPI data
++	}
++#endif
++
++#else
++
++	*drv_data->qar = QSPI_TRANSMIT_RAM;
++ 	while ((drv_data->tx < drv_data->tx_end) && (tx_count < QSPI_RAM_SIZE)) {
++ 		if (tx_word) {
++			if ((drv_data->tx_end - drv_data->tx) == 1)
++				break;
++
++ 			if (!(drv_data->flags & TRAN_STATE_TX_VOID))
++ 				*drv_data->qdr = *(u16 *)drv_data->tx;
++ 			else
++ 				*drv_data->qdr = drv_data->void_write_data;
++ 			drv_data->tx += 2;
++ 		} else {
++ 			if (!(drv_data->flags & TRAN_STATE_TX_VOID))
++ 				*drv_data->qdr = *(u8 *)drv_data->tx;
++ 			else
++ 				*drv_data->qdr = *(u8 *)&drv_data->void_write_data;
++ 			drv_data->tx++;
++ 		}
++ 		tx_count++;
++ 	}
++
++
++ 	*drv_data->qar = QSPI_COMMAND_RAM;
++ 	while (cmd_count < tx_count) {
++		u16 qcr =   QSPI_COMMAND
++			  | QCR_CONT
++			  | (~((0x01 << drv_data->cs) << 8) & 0x0F00);
++
++		if ( 	   (cmd_count == tx_count - 1)
++			&& (drv_data->tx == drv_data->tx_end)
++			&& (drv_data->cs_change) ) {
++			qcr &= ~QCR_CONT;
++		}
++		*drv_data->qcr = qcr;
++		cmd_count++;
++	}
++
++	*drv_data->qwr = (*drv_data->qwr & ~QWR_ENDQP_MASK) | ((cmd_count - 1) << 8);
++
++ 	/* Fire it up! */
++ 	*drv_data->qdlyr |= QDLYR_SPE;
++#endif
++
++ 	return tx_count;
++}
++
++
++static int read(struct driver_data *drv_data)
++{
++	int rx_count = 0;
++	int rx_word;
++#if defined(SPI_DSPI_EDMA)
++	u32* rx_edma;
++#endif
++	u16 d;
++	rx_word = is_word_transfer(drv_data);
++
++#if defined(SPI_DSPI)
++
++#if defined(SPI_DSPI_EDMA)
++	rx_edma = (u32*) drv_data->edma_tx_buf;
++	while ((drv_data->rx < drv_data->rx_end) && (rx_count < EDMA_BUFFER_SIZE)) {
++#else
++	while ((drv_data->rx < drv_data->rx_end) && (rx_count < DSPI_FIFO_SIZE)) {
++#endif
++		if (rx_word) {
++			if ((drv_data->rx_end - drv_data->rx) == 1)
++				break;
++#if defined(SPI_DSPI_EDMA)
++			d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
++			rx_edma++;
++#else
++			d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr);
++#endif
++
++			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
++				*(u16 *)drv_data->rx = d;
++			drv_data->rx += 2;
++		} else {
++#if defined(SPI_DSPI_EDMA)
++			d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
++			rx_edma++;
++#else
++			d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr);
++#endif
++			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
++				*(u8 *)drv_data->rx = d;
++			drv_data->rx++;
++		}
++		rx_count++;
++	}
++
++
++#else
++
++	*drv_data->qar = QSPI_RECEIVE_RAM;
++	while ((drv_data->rx < drv_data->rx_end) && (rx_count < QSPI_RAM_SIZE)) {
++		if (rx_word) {
++			if ((drv_data->rx_end - drv_data->rx) == 1)
++				break;
++
++			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
++				*(u16 *)drv_data->rx = *drv_data->qdr;
++			drv_data->rx += 2;
++		} else {
++			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
++				*(u8 *)drv_data->rx = *drv_data->qdr;
++			drv_data->rx++;
++		}
++		rx_count++;
++	}
++#endif
++
++	return rx_count;
++}
++
++
++static inline void qspi_setup_chip(struct driver_data *drv_data)
++{
++	struct chip_data *chip = drv_data->cur_chip;
++
++#if defined(SPI_DSPI)
++
++	*drv_data->mcr = chip->mcr_val;
++
++	// TODO: remove later
++	chip->ctar_val = 0x78560118;
++
++	*drv_data->ctar = chip->ctar_val;
++	*drv_data->dspi_rser =  0
++							| MCF_DSPI_DRSER_EOQFE
++#if defined(SPI_DSPI_EDMA)
++							| MCF_DSPI_DRSER_TFFFE
++							| MCF_DSPI_DRSER_TFFFS
++#endif
++							;
++
++
++#else
++	*drv_data->qmr = chip->qmr_val;
++	*drv_data->qdlyr = chip->qdlyr_val;
++	*drv_data->qwr = chip->qwr_val;
++
++	/*
++	 * Enable all the interrupts and clear all the flags
++	 */
++	*drv_data->qir =  (QIR_SPIFE | QIR_ABRTE | QIR_WCEFE)
++			| (QIR_WCEFB | QIR_ABRTB | QIR_ABRTL)
++			| (QIR_SPIF  | QIR_ABRT  | QIR_WCEF);
++#endif
++}
++
++#if defined(SPI_DSPI_EDMA)
++static int edma_tx_handler(int channel, void* dev)
++{
++	if (channel == DSPI_DMA_TX_TCD) {
++		stop_edma_transfer(DSPI_DMA_TX_TCD);
++	}
++	return IRQ_HANDLED;
++}
++
++static int edma_rx_handler(int channel, void* dev)
++{
++	if (channel == DSPI_DMA_RX_TCD) {
++		stop_edma_transfer(DSPI_DMA_RX_TCD);
++	}
++
++	return IRQ_HANDLED;
++}
++#endif
++
++static irqreturn_t qspi_interrupt(int irq, void *dev_id)
++{
++	struct driver_data *drv_data = (struct driver_data *)dev_id;
++	struct spi_message *msg = drv_data->cur_msg;
++#if defined(SPI_DSPI)
++#if !defined(SPI_DSPI_EDMA)
++ 	u32 irq_status = *drv_data->dspi_sr;
++#endif
++#else
++	u16 irq_status = *drv_data->qir;
++#endif
++
++	/* Clear all flags immediately */
++#if defined(SPI_DSPI)
++	*drv_data->dspi_sr = MCF_DSPI_DSR_EOQF;
++#else
++	*drv_data->qir |= (QIR_SPIF | QIR_ABRT | QIR_WCEF);
++#endif
++
++	if (!drv_data->cur_msg || !drv_data->cur_msg->state) {
++#if !defined(SPI_DSPI_EDMA)
++		/* if eDMA is used it happens some time (at least once)*/
++		printk(KERN_ERR "coldfire-qspi: bad message or transfer "
++		"state in interrupt handler. IRQ status=%x\n", irq_status);
++#endif
++		return IRQ_NONE;
++	}
++
++#if !defined(SPI_DSPI)
++	if (irq_status & QIR_SPIF) {
++#endif
++		/*
++		 * Read the data into the buffer and reload and start
++		 * queue with new data if not finished.  If finished
++		 * then setup the next transfer
++		 */
++		 read(drv_data);
++
++		 if (drv_data->rx == drv_data->rx_end) {
++			/*
++			 * Finished now - fall through and schedule next
++			 * transfer tasklet
++			 */
++			if (drv_data->flags & TRAN_STATE_WORD_ODD_NUM) {
++				//*drv_data->qmr &= ~QMR_BITS;
++				set_16bit_transfer_mode(drv_data);
++			}
++
++			msg->state = next_transfer(drv_data);
++			msg->actual_length += drv_data->len;
++		 } else {
++			/* not finished yet - keep going */
++		 	write(drv_data);
++		 	return IRQ_HANDLED;
++		 }
++#if !defined(SPI_DSPI)
++	} else {
++		if (irq_status & QIR_WCEF)
++			drv_data->wce_cnt++;
++
++		if (irq_status & QIR_ABRT)
++			drv_data->abrt_cnt++;
++
++		msg->state = ERROR_STATE;
++	}
++#endif
++
++	tasklet_schedule(&drv_data->pump_transfers);
++
++	return IRQ_HANDLED;
++}
++
++/* caller already set message->status; dma and pio irqs are blocked */
++static void giveback(struct driver_data *drv_data)
++{
++	struct spi_transfer* last_transfer;
++	unsigned long flags;
++	struct spi_message *msg;
++
++	spin_lock_irqsave(&drv_data->lock, flags);
++	msg = drv_data->cur_msg;
++	drv_data->cur_msg = NULL;
++	drv_data->cur_transfer = NULL;
++	drv_data->cur_chip = NULL;
++	queue_work(drv_data->workqueue, &drv_data->pump_messages);
++	spin_unlock_irqrestore(&drv_data->lock, flags);
++
++	last_transfer = list_entry(msg->transfers.prev,
++					struct spi_transfer,
++					transfer_list);
++
++	if (!last_transfer->cs_change)
++		drv_data->cs_control(drv_data->cs, QSPI_CS_DROP);
++
++	msg->state = NULL;
++	if (msg->complete)
++		msg->complete(msg->context);
++}
++
++
++static void pump_transfers(unsigned long data)
++{
++	struct driver_data *drv_data = (struct driver_data *)data;
++	struct spi_message *message = NULL;
++	struct spi_transfer *transfer = NULL;
++	struct spi_transfer *previous = NULL;
++	struct chip_data *chip = NULL;
++	unsigned long flags;
++
++	/* Get current state information */
++	message = drv_data->cur_msg;
++	transfer = drv_data->cur_transfer;
++	chip = drv_data->cur_chip;
++
++	/* Handle for abort */
++	if (message->state == ERROR_STATE) {
++		message->status = -EIO;
++		giveback(drv_data);
++		return;
++	}
++
++	/* Handle end of message */
++	if (message->state == DONE_STATE) {
++		message->status = 0;
++		giveback(drv_data);
++		return;
++	}
++
++	if (message->state == START_STATE) {
++		qspi_setup_chip(drv_data);
++
++		if (drv_data->cs_control) {
++			//printk( "m s\n" );
++        		drv_data->cs_control(message->spi->chip_select, QSPI_CS_ASSERT);
++		}
++	}
++
++	/* Delay if requested at end of transfer*/
++	if (message->state == RUNNING_STATE) {
++		previous = list_entry(transfer->transfer_list.prev,
++					struct spi_transfer,
++					transfer_list);
++
++		if (drv_data->cs_control && transfer->cs_change)
++			drv_data->cs_control(message->spi->chip_select, QSPI_CS_DROP);
++
++		if (previous->delay_usecs)
++			udelay(previous->delay_usecs);
++
++		if (drv_data->cs_control && transfer->cs_change)
++			drv_data->cs_control(message->spi->chip_select, QSPI_CS_ASSERT);
++	}
++
++	drv_data->flags = 0;
++	drv_data->tx = (void *)transfer->tx_buf;
++	drv_data->tx_end = drv_data->tx + transfer->len;
++	drv_data->rx = transfer->rx_buf;
++	drv_data->rx_end = drv_data->rx + transfer->len;
++	drv_data->len = transfer->len;
++	if (!drv_data->rx)
++		drv_data->flags |= TRAN_STATE_RX_VOID;
++	if (!drv_data->tx)
++		drv_data->flags |= TRAN_STATE_TX_VOID;
++	drv_data->cs = message->spi->chip_select;
++	drv_data->cs_change = transfer->cs_change;
++	drv_data->void_write_data = chip->void_write_data;
++
++	message->state = RUNNING_STATE;
++
++	/* Go baby, go */
++	local_irq_save(flags);
++	write(drv_data);
++	local_irq_restore(flags);
++}
++
++
++static void pump_messages(struct work_struct * work)
++{
++	struct driver_data *drv_data;
++	unsigned long flags;
++
++	drv_data = container_of(work,  struct driver_data, pump_messages);
++
++	/* Lock queue and check for queue work */
++	spin_lock_irqsave(&drv_data->lock, flags);
++	if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
++		drv_data->busy = 0;
++		spin_unlock_irqrestore(&drv_data->lock, flags);
++		return;
++	}
++
++	/* Make sure we are not already running a message */
++	if (drv_data->cur_msg) {
++		spin_unlock_irqrestore(&drv_data->lock, flags);
++		return;
++	}
++
++	/* Extract head of queue */
++	drv_data->cur_msg = list_entry(drv_data->queue.next,
++					struct spi_message, queue);
++	list_del_init(&drv_data->cur_msg->queue);
++
++	/* Initial message state*/
++	drv_data->cur_msg->state = START_STATE;
++	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
++						struct spi_transfer,
++						transfer_list);
++
++	/* Setup the SPI Registers using the per chip configuration */
++	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
++
++	/* Mark as busy and launch transfers */
++	tasklet_schedule(&drv_data->pump_transfers);
++
++	drv_data->busy = 1;
++	spin_unlock_irqrestore(&drv_data->lock, flags);
++}
++
++/****************************************************************************/
++
++/*
++ * SPI master implementation
++ */
++
++static int transfer(struct spi_device *spi, struct spi_message *msg)
++{
++	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
++	unsigned long flags;
++
++	spin_lock_irqsave(&drv_data->lock, flags);
++
++	if (drv_data->run == QUEUE_STOPPED) {
++		spin_unlock_irqrestore(&drv_data->lock, flags);
++		return -ESHUTDOWN;
++	}
++
++	msg->actual_length = 0;
++	msg->status = -EINPROGRESS;
++	msg->state = START_STATE;
++
++	list_add_tail(&msg->queue, &drv_data->queue);
++
++	if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
++		queue_work(drv_data->workqueue, &drv_data->pump_messages);
++
++	spin_unlock_irqrestore(&drv_data->lock, flags);
++
++	return 0;
++}
++
++
++static int setup(struct spi_device *spi)
++{
++	struct coldfire_spi_chip *chip_info;
++	struct chip_data *chip;
++#ifndef SPI_DSPI
++	u32 baud_divisor = 255;
++#endif
++
++	chip_info = (struct coldfire_spi_chip *)spi->controller_data;
++
++	/* Only alloc on first setup */
++	chip = spi_get_ctldata(spi);
++	if (chip == NULL) {
++ 		chip = kcalloc(1, sizeof(struct chip_data), GFP_KERNEL);
++		if (!chip)
++			return -ENOMEM;
++		spi->mode = chip_info->mode;
++		spi->bits_per_word = chip_info->bits_per_word;
++	}
++
++#if defined(SPI_DSPI)
++	chip->mcr.master = 1;
++	chip->mcr.cont_scke = 0;
++	chip->mcr.dconf = 0;
++	chip->mcr.frz = 0;
++	chip->mcr.mtfe = 1;
++	chip->mcr.pcsse = 0;
++	chip->mcr.rooe = 0;
++	chip->mcr.pcsis = 0xFF;
++	chip->mcr.reserved15 = 0;
++	chip->mcr.mdis = 0;
++	chip->mcr.dis_tx = 0;
++	chip->mcr.dis_rxf = 0;
++	chip->mcr.clr_tx = 1;
++	chip->mcr.clr_rxf = 1;
++	chip->mcr.smpl_pt = 0;
++	chip->mcr.reserved71 = 0;
++	chip->mcr.halt = 0;
++
++	if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) {
++		chip->ctar.fmsz = spi->bits_per_word-1;
++	} else {
++		printk(KERN_ERR "coldfire-qspi: invalid wordsize\n");
++		kfree(chip);
++		return -ENODEV;
++	}
++
++	if (spi->mode & SPI_CPHA)
++		chip->ctar.cpha = 1;
++	else
++		chip->ctar.cpha = 0;
++
++	if (spi->mode & SPI_CPOL)
++		chip->ctar.cpol = 1;
++	else
++		chip->ctar.cpol = 0;
++
++	if (spi->mode & SPI_LSB_FIRST)
++		chip->ctar.lsbfe = 1;
++	else
++		chip->ctar.lsbfe = 0;
++
++	/* This values are default for audio device */
++	chip->ctar.dbr = 0;
++	chip->ctar.pbr = 2;
++	chip->ctar.br = 8;
++
++	/* This values are default for audio device */
++	chip->ctar.pcssck = 1;
++	chip->ctar.pasc = 1;
++	chip->ctar.pdt = 1;
++	chip->ctar.cssck = 0;
++	chip->ctar.asc = 1;
++	chip->ctar.dt = 1;
++
++	chip->void_write_data = chip_info->void_write_data;
++
++#else
++
++	chip->qwr.csiv = 1;    // Chip selects are active low
++	chip->qmr.master = 1;  // Must set to master mode
++	chip->qmr.dohie = 1;   // Data output high impediance enabled
++	chip->void_write_data = chip_info->void_write_data;
++
++	chip->qdlyr.qcd = chip_info->del_cs_to_clk;
++	chip->qdlyr.dtl = chip_info->del_after_trans;
++
++	if (spi->max_speed_hz != 0)
++		baud_divisor = (MCF_CLK/(2*spi->max_speed_hz));
++
++	if (baud_divisor < 2)
++		baud_divisor = 2;
++
++	if (baud_divisor > 255)
++		baud_divisor = 255;
++
++	chip->qmr.baud = baud_divisor;
++
++	//printk( "QSPI: spi->max_speed_hz %d\n", spi->max_speed_hz );
++	//printk( "QSPI: Baud set to %d\n", chip->qmr.baud );
++
++	if (spi->mode & SPI_CPHA)
++		chip->qmr.cpha = 1;
++
++	if (spi->mode & SPI_CPOL)
++		chip->qmr.cpol = 1;
++
++	if (spi->bits_per_word == 16) {
++		chip->qmr.bits = 0;
++	} else if ((spi->bits_per_word >= 8) && (spi->bits_per_word <= 15)) {
++		chip->qmr.bits = spi->bits_per_word;
++	} else {
++		printk(KERN_ERR "coldfire-qspi: invalid wordsize\n");
++		kfree(chip);
++		return -ENODEV;
++	}
++
++#endif
++
++ 	spi_set_ctldata(spi, chip);
++
++ 	return 0;
++}
++
++static int init_queue(struct driver_data *drv_data)
++{
++	INIT_LIST_HEAD(&drv_data->queue);
++	spin_lock_init(&drv_data->lock);
++
++	drv_data->run = QUEUE_STOPPED;
++	drv_data->busy = 0;
++
++	tasklet_init(&drv_data->pump_transfers,
++			pump_transfers,	(unsigned long)drv_data);
++
++	INIT_WORK(&drv_data->pump_messages, pump_messages/*, drv_data*/);
++
++	drv_data->workqueue = create_singlethread_workqueue(
++					drv_data->master->cdev.dev->bus_id);
++	if (drv_data->workqueue == NULL)
++		return -EBUSY;
++
++	return 0;
++}
++
++static int start_queue(struct driver_data *drv_data)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&drv_data->lock, flags);
++
++	if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
++		spin_unlock_irqrestore(&drv_data->lock, flags);
++		return -EBUSY;
++	}
++
++	drv_data->run = QUEUE_RUNNING;
++	drv_data->cur_msg = NULL;
++	drv_data->cur_transfer = NULL;
++	drv_data->cur_chip = NULL;
++	spin_unlock_irqrestore(&drv_data->lock, flags);
++
++	queue_work(drv_data->workqueue, &drv_data->pump_messages);
++
++	return 0;
++}
++
++static int stop_queue(struct driver_data *drv_data)
++{
++	unsigned long flags;
++	unsigned limit = 500;
++	int status = 0;
++
++	spin_lock_irqsave(&drv_data->lock, flags);
++
++	/* This is a bit lame, but is optimized for the common execution path.
++	 * A wait_queue on the drv_data->busy could be used, but then the common
++	 * execution path (pump_messages) would be required to call wake_up or
++	 * friends on every SPI message. Do this instead */
++	drv_data->run = QUEUE_STOPPED;
++	while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
++		spin_unlock_irqrestore(&drv_data->lock, flags);
++		msleep(10);
++		spin_lock_irqsave(&drv_data->lock, flags);
++	}
++
++	if (!list_empty(&drv_data->queue) || drv_data->busy)
++		status = -EBUSY;
++
++	spin_unlock_irqrestore(&drv_data->lock, flags);
++
++	return status;
++}
++
++static int destroy_queue(struct driver_data *drv_data)
++{
++	int status;
++
++	status = stop_queue(drv_data);
++	if (status != 0)
++		return status;
++
++	destroy_workqueue(drv_data->workqueue);
++
++	return 0;
++}
++
++
++static void cleanup(const struct spi_device *spi)
++{
++	struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
++
++ 	dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n",
++ 		spi->master->bus_num, spi->chip_select);
++
++	kfree(chip);
++}
++
++
++/****************************************************************************/
++
++/*
++ * Generic Device driver routines and interface implementation
++ */
++
++static int coldfire_spi_probe(struct platform_device *pdev)
++{
++ 	struct device *dev = &pdev->dev;
++ 	struct coldfire_spi_master *platform_info;
++ 	struct spi_master *master;
++ 	struct driver_data *drv_data = 0;
++ 	struct resource *memory_resource;
++	int irq;
++	int status = 0;
++	int i;
++
++#if defined(SPI_DSPI_EDMA)
++	init_edma();
++#endif
++
++ 	platform_info = (struct coldfire_spi_master *)pdev->dev.platform_data;
++
++  	master = spi_alloc_master(dev, sizeof(struct driver_data));
++  	if (!master)
++ 		return -ENOMEM;
++
++ 	drv_data = class_get_devdata(&master->cdev);
++ 	drv_data->master = master;
++
++	INIT_LIST_HEAD(&drv_data->queue);
++	spin_lock_init(&drv_data->lock);
++
++	master->bus_num = platform_info->bus_num;
++	master->num_chipselect = platform_info->num_chipselect;
++	master->cleanup = cleanup;
++	master->setup = setup;
++	master->transfer = transfer;
++
++ 	drv_data->cs_control = platform_info->cs_control;
++ 	if (drv_data->cs_control)
++ 		for(i = 0; i < master->num_chipselect; i++)
++ 			drv_data->cs_control(i, QSPI_CS_INIT | QSPI_CS_DROP);
++
++	/* Setup register addresses */
++ 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi-module");
++ 	if (!memory_resource) {
++ 		dev_dbg(dev, "can not find platform module memory\n");
++ 		goto out_error_master_alloc;
++ 	}
++
++#if defined(SPI_DSPI_EDMA)
++ 	drv_data->edma_tx_buf = kmalloc(EDMA_BUFSIZE_KMALLOC, GFP_DMA);
++ 	if (!drv_data->edma_tx_buf) {
++	 	dev_dbg(dev, "cannot allocate eDMA TX memory\n");
++	 	goto out_error_master_alloc;
++ 	}
++ 	drv_data->edma_rx_buf = kmalloc(EDMA_BUFSIZE_KMALLOC, GFP_DMA);
++ 	if (!drv_data->edma_rx_buf) {
++	 	kfree(drv_data->edma_tx_buf);
++	 	dev_dbg(dev, "cannot allocate eDMA RX memory\n");
++	 	goto out_error_master_alloc;
++ 	}
++#endif 	
++ 	
++#if defined(SPI_DSPI)
++
++	drv_data->mcr 		= (void *)(memory_resource->start + 0x00000000);
++	drv_data->ctar 		= (void *)(memory_resource->start + 0x0000000C);
++	drv_data->dspi_sr 	= (void *)(memory_resource->start + 0x0000002C);
++	drv_data->dspi_rser = (void *)(memory_resource->start + 0x00000030);
++	drv_data->dspi_dtfr = (void *)(memory_resource->start + 0x00000034);
++	drv_data->dspi_drfr = (void *)(memory_resource->start + 0x00000038);
++
++#else
++
++ 	drv_data->qmr   = (void *)(memory_resource->start + 0x00000000);
++ 	drv_data->qdlyr = (void *)(memory_resource->start + 0x00000004);
++ 	drv_data->qwr   = (void *)(memory_resource->start + 0x00000008);
++ 	drv_data->qir   = (void *)(memory_resource->start + 0x0000000c);
++ 	drv_data->qar   = (void *)(memory_resource->start + 0x00000010);
++ 	drv_data->qdr   = (void *)(memory_resource->start + 0x00000014);
++ 	drv_data->qcr   = (void *)(memory_resource->start + 0x00000014);
++
++#endif
++
++	/* Setup register addresses */
++ 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi-par");
++ 	if (!memory_resource) {
++ 		dev_dbg(dev, "can not find platform par memory\n");
++ 		goto out_error_master_alloc;
++ 	}
++
++ 	drv_data->par = (void *)memory_resource->start;
++
++	/* Setup register addresses */
++ 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi-int-level");
++ 	if (!memory_resource) {
++ 		dev_dbg(dev, "can not find platform par memory\n");
++ 		goto out_error_master_alloc;
++ 	}
++
++ 	drv_data->int_icr = (void *)memory_resource->start;
++
++	/* Setup register addresses */
++ 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi-int-mask");
++ 	if (!memory_resource) {
++ 		dev_dbg(dev, "can not find platform par memory\n");
++ 		goto out_error_master_alloc;
++ 	}
++
++ 	drv_data->int_mr = (void *)memory_resource->start;
++
++	irq = platform_info->irq_vector;
++
++	status = request_irq(platform_info->irq_vector, qspi_interrupt, SA_INTERRUPT, dev->bus_id, drv_data);
++	if (status < 0) {
++		dev_err(&pdev->dev, "unable to attach ColdFire QSPI interrupt\n");
++		goto out_error_master_alloc;
++	}
++
++	/* Now that we have all the addresses etc.  Let's set it up */
++	// TODO:
++	//*drv_data->par = platform_info->par_val;
++
++	MCF_GPIO_PAR_DSPI = 0
++		| MCF_GPIO_PAR_DSPI_PCS5_PCS5
++		| MCF_GPIO_PAR_DSPI_PCS2_PCS2
++		| MCF_GPIO_PAR_DSPI_PCS1_PCS1
++		| MCF_GPIO_PAR_DSPI_PCS0_PCS0
++		| MCF_GPIO_PAR_DSPI_SIN_SIN
++		| MCF_GPIO_PAR_DSPI_SOUT_SOUT
++		| MCF_GPIO_PAR_DSPI_SCK_SCK;
++
++	*drv_data->int_icr = platform_info->irq_lp;
++	*drv_data->int_mr &= ~platform_info->irq_mask;
++
++#ifdef SPI_DSPI
++	drv_data->dspi_ctas = 0; // TODO: change later
++#endif
++
++	/* Initial and start queue */
++	status = init_queue(drv_data);
++	if (status != 0) {
++		dev_err(&pdev->dev, "problem initializing queue\n");
++		goto out_error_irq_alloc;
++	}
++	status = start_queue(drv_data);
++	if (status != 0) {
++		dev_err(&pdev->dev, "problem starting queue\n");
++		goto out_error_irq_alloc;
++	}
++
++	/* Register with the SPI framework */
++	platform_set_drvdata(pdev, drv_data);
++	status = spi_register_master(master);
++	if (status != 0) {
++		dev_err(&pdev->dev, "problem registering spi master\n");
++		status = -EINVAL;
++                goto out_error_queue_alloc;
++	}
++
++#if defined(SPI_DSPI_EDMA)
++	if (request_edma_channel(DSPI_DMA_TX_TCD,
++							edma_tx_handler,
++							NULL,
++							pdev,
++							NULL, /* spinlock */
++							DRIVER_NAME
++							)!=0)
++	{
++		dev_err(&pdev->dev, "problem requesting edma transmit channel\n");
++		status = -EINVAL;
++        goto out_error_queue_alloc;
++	}
++
++	if (request_edma_channel(DSPI_DMA_RX_TCD,
++							edma_rx_handler,
++							NULL,
++							pdev,
++							NULL, /* spinlock */
++							DRIVER_NAME
++							)!=0)
++	{
++		dev_err(&pdev->dev, "problem requesting edma receive channel\n");
++		status = -EINVAL;
++        goto out_edma_transmit;
++	}
++#endif
++
++	printk( "SPI: Coldfire master initialized\n" );
++	//dev_info(&pdev->dev, "driver initialized\n");
++	return status;
++
++#if defined(SPI_DSPI_EDMA)
++out_edma_transmit:
++	free_edma_channel(DSPI_DMA_TX_TCD, pdev);
++#endif
++
++out_error_queue_alloc:
++	destroy_queue(drv_data);
++
++out_error_irq_alloc:
++	free_irq(irq, drv_data);
++
++out_error_master_alloc:
++	spi_master_put(master);
++	return status;
++
++}
++
++static int coldfire_spi_remove(struct platform_device *pdev)
++{
++	struct driver_data *drv_data = platform_get_drvdata(pdev);
++	int irq;
++	int status = 0;
++
++	if (!drv_data)
++		return 0;
++
++#if defined(SPI_DSPI_EDMA)
++	free_edma_channel(DSPI_DMA_TX_TCD, pdev);
++	free_edma_channel(DSPI_DMA_RX_TCD, pdev);
++#endif	
++
++	/* Remove the queue */
++	status = destroy_queue(drv_data);
++	if (status != 0)
++		return status;
++
++	/* Disable the SSP at the peripheral and SOC level */
++	/*write_SSCR0(0, drv_data->ioaddr);
++	pxa_set_cken(drv_data->master_info->clock_enable, 0);*/
++
++	/* Release DMA */
++	/*if (drv_data->master_info->enable_dma) {
++		if (drv_data->ioaddr == SSP1_VIRT) {
++			DRCMRRXSSDR = 0;
++			DRCMRTXSSDR = 0;
++		} else if (drv_data->ioaddr == SSP2_VIRT) {
++			DRCMRRXSS2DR = 0;
++			DRCMRTXSS2DR = 0;
++		} else if (drv_data->ioaddr == SSP3_VIRT) {
++			DRCMRRXSS3DR = 0;
++			DRCMRTXSS3DR = 0;
++		}
++		pxa_free_dma(drv_data->tx_channel);
++		pxa_free_dma(drv_data->rx_channel);
++	}*/
++
++	/* Release IRQ */
++	irq = platform_get_irq(pdev, 0);
++	if (irq >= 0)
++		free_irq(irq, drv_data);
++
++	/* Disconnect from the SPI framework */
++	spi_unregister_master(drv_data->master);
++
++	/* Prevent double remove */
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++static void coldfire_spi_shutdown(struct platform_device *pdev)
++{
++	int status = 0;
++
++	if ((status = coldfire_spi_remove(pdev)) != 0)
++		dev_err(&pdev->dev, "shutdown failed with %d\n", status);
++}
++
++
++#ifdef CONFIG_PM
++static int suspend_devices(struct device *dev, void *pm_message)
++{
++	pm_message_t *state = pm_message;
++
++	if (dev->power.power_state.event != state->event) {
++		dev_warn(dev, "pm state does not match request\n");
++		return -1;
++	}
++
++	return 0;
++}
++
++static int coldfire_spi_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	struct driver_data *drv_data = platform_get_drvdata(pdev);
++	int status = 0;
++
++	/* Check all childern for current power state */
++	if (device_for_each_child(&pdev->dev, &state, suspend_devices) != 0) {
++		dev_warn(&pdev->dev, "suspend aborted\n");
++		return -1;
++	}
++
++	status = stop_queue(drv_data);
++	if (status != 0)
++		return status;
++	/*write_SSCR0(0, drv_data->ioaddr);
++	pxa_set_cken(drv_data->master_info->clock_enable, 0);*/
++
++	return 0;
++}
++
++static int coldfire_spi_resume(struct platform_device *pdev)
++{
++	struct driver_data *drv_data = platform_get_drvdata(pdev);
++	int status = 0;
++
++	/* Enable the SSP clock */
++	/*pxa_set_cken(drv_data->master_info->clock_enable, 1);*/
++
++	/* Start the queue running */
++	status = start_queue(drv_data);
++	if (status != 0) {
++		dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
++		return status;
++	}
++
++	return 0;
++}
++#else
++#define coldfire_spi_suspend NULL
++#define coldfire_spi_resume NULL
++#endif /* CONFIG_PM */
++
++static struct platform_driver driver = {
++	.driver = {
++		.name = "spi_coldfire",
++		.bus = &platform_bus_type,
++		.owner = THIS_MODULE,
++	},
++	.probe = coldfire_spi_probe,
++	.remove = __devexit_p(coldfire_spi_remove),
++	.shutdown = coldfire_spi_shutdown,
++	.suspend = coldfire_spi_suspend,
++	.resume = coldfire_spi_resume,
++};
++
++static int __init coldfire_spi_init(void)
++{
++	platform_driver_register(&driver);
++
++	return 0;
++}
++module_init(coldfire_spi_init);
++
++static void __exit coldfire_spi_exit(void)
++{
++	platform_driver_unregister(&driver);
++}
++module_exit(coldfire_spi_exit);
+--- /dev/null
++++ b/drivers/spi/ssi_audio.c
+@@ -0,0 +1,906 @@
++/*
++ * MCF5445x audio driver.
++ *
++ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
++ * Copyright Freescale Semiconductor, Inc. 2006
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spi/spi.h>
++#include <linux/fs.h>
++#include <linux/kernel.h>
++#include <linux/major.h>
++#include <asm/mcfsim.h>
++#include <linux/interrupt.h>
++#include <linux/soundcard.h>
++#include <asm/uaccess.h>
++#include <asm/virtconvert.h>
++
++#include <asm/coldfire.h>
++#include <asm/coldfire_edma.h>
++#include <asm/mcf5445x_ssi.h>
++#include <asm/mcf5445x_ccm.h>
++#include <asm/mcf5445x_gpio.h>
++
++#define SOUND_DEVICE_NAME "sound"
++#define DRIVER_NAME "ssi_audio"
++
++
++/* #define AUDIO_DEBUG */
++
++#ifdef CONFIG_MMU
++#define USE_MMU
++#endif
++
++#define MAX_SPEED_HZ 12000000
++
++#define M5445x_AUDIO_IRQ_SOURCE 49
++#define M5445x_AUDIO_IRQ_VECTOR (128+M5445x_AUDIO_IRQ_SOURCE)
++#define M5445x_AUDIO_IRQ_LEVEL	5
++
++/* TLV320DAC23 audio chip registers */
++
++#define CODEC_LEFT_IN_REG			(0x00)
++#define CODEC_RIGHT_IN_REG			(0x01)
++#define CODEC_LEFT_HP_VOL_REG		(0x02)
++#define CODEC_RIGHT_HP_VOL_REG		(0x03)
++#define CODEC_ANALOG_APATH_REG		(0x04)
++#define CODEC_DIGITAL_APATH_REG		(0x05)
++#define CODEC_POWER_DOWN_REG		(0x06)
++#define CODEC_DIGITAL_IF_FMT_REG	(0x07)
++#define CODEC_SAMPLE_RATE_REG		(0x08)
++#define CODEC_DIGITAL_IF_ACT_REG	(0x09)
++#define CODEC_RESET_REG				(0x0f)
++
++#define CODEC_SAMPLE_8KHZ		(0x0C)
++#define CODEC_SAMPLE_16KHZ		(0x58)
++#define CODEC_SAMPLE_22KHZ		(0x62)
++#define CODEC_SAMPLE_32KHZ		(0x18)
++#define CODEC_SAMPLE_44KHZ		(0x22)
++#define CODEC_SAMPLE_48KHZ		(0x00)
++
++/* Audio buffer data size */
++#define	BUFSIZE		(64*1024)
++/* DMA transfer size */
++#define DMASIZE		(16*1024)
++
++/* transmit eDMA channel for SSI channel 0 */
++#define DMA_TCD 	10
++/* transmit eDMA channel for SSI channel 1 */
++#define DMA_TCD2 	11
++
++struct ssi_audio {
++	struct spi_device	*spi;
++	u32 speed;
++	u32 stereo;
++	u32 bits;
++	u32 format;
++	u8  isopen;
++	u8  dmaing;
++	u8  ssi_enabled;
++	u8  channel;
++	spinlock_t lock;
++	u8* audio_buf;
++};
++
++static struct ssi_audio* audio_device = NULL;
++volatile u32 audio_start;
++volatile u32 audio_count;
++volatile u32 audio_append;
++volatile u32 audio_appstart;
++volatile u32 audio_txbusy;
++
++struct ssi_audio_format {
++	unsigned int	format;
++	unsigned int	bits;
++} ssi_audio_formattable[] = {
++	{ AFMT_MU_LAW,		8 },
++	{ AFMT_A_LAW,		8 },
++	{ AFMT_IMA_ADPCM,	8 },
++	{ AFMT_U8,		8 },
++	{ AFMT_S16_LE,		16 },
++	{ AFMT_S16_BE,		16 },
++	{ AFMT_S8,		8 },
++	{ AFMT_U16_LE,		16 },
++	{ AFMT_U16_BE,		16 },
++};
++
++#define	FORMATSIZE	(sizeof(ssi_audio_formattable) / sizeof(struct ssi_audio_format))
++
++static void ssi_audio_setsamplesize(int val)
++{
++	int	i;
++
++	if (audio_device == NULL) return;
++
++	for (i = 0; (i < FORMATSIZE); i++) {
++		if (ssi_audio_formattable[i].format == val) {
++			audio_device->format = ssi_audio_formattable[i].format;
++			audio_device->bits = ssi_audio_formattable[i].bits;
++			break;
++		}
++	}
++
++#ifdef AUDIO_DEBUG
++	printk(DRIVER_NAME ":ssi_audio_setsamplesize %d %d\n", audio_device->format, audio_device->bits);
++#endif
++}
++
++static void ssi_audio_txdrain(void)
++{
++#ifdef AUDIO_DEBUG
++	printk(DRIVER_NAME ":ssi_audio_txdrain()\n");
++#endif
++
++	if (audio_device == NULL) return;
++
++	while (!signal_pending(current)) {
++		if (audio_txbusy == 0)
++			break;
++		current->state = TASK_INTERRUPTIBLE;
++		schedule_timeout(1);
++	}
++}
++
++#ifdef CONFIG_SSIAUDIO_USE_EDMA
++/*
++ *	Configure and start DMA engine.
++ */
++void __inline__ ssi_audio_dmarun(void)
++{
++	set_edma_params(DMA_TCD,
++#ifdef USE_MMU
++					virt_to_phys(&(audio_device->audio_buf[audio_start])),
++#else
++					(u32)&(audio_device->audio_buf[audio_start]),
++#endif
++					(u32)&MCF_SSI_TX0,
++					MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
++					8,
++					4,
++					0,
++					audio_count/8,
++					audio_count/8,
++					0,
++					0,
++					0, // major_int
++					0  // disable_req
++					);
++
++	set_edma_params(DMA_TCD2,
++#ifdef USE_MMU
++					virt_to_phys(&(audio_device->audio_buf[audio_start+4])),
++#else
++					(u32)&(audio_device->audio_buf[audio_start+4]),
++#endif
++					(u32)&MCF_SSI_TX1,
++					MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
++					8,
++					4,
++					0,
++					audio_count/8,
++					audio_count/8,
++					0,
++					0,
++					1, // major_int
++                    0  // disable_req
++					);
++
++	audio_device->dmaing = 1;
++	audio_txbusy = 1;
++
++	start_edma_transfer(DMA_TCD);
++	start_edma_transfer(DMA_TCD2);
++#if 0
++	MCF_EDMA_ERQ |= (1<<DMA_TCD) | (1<<DMA_TCD2);
++	MCF_EDMA_SSRT = DMA_TCD;
++	MCF_EDMA_SSRT = DMA_TCD2;
++#endif
++
++}
++
++/*
++ *	Start DMA'ing a new buffer of data if any available.
++ */
++static void ssi_audio_dmabuf(void)
++{
++#ifdef AUDIO_DEBUG
++	printk(DRIVER_NAME ":ssi_audio_dmabuf(): append=%x start=%x\n", audio_append, audio_appstart);
++#endif
++
++	/* If already running then nothing to do... */
++	if (audio_device->dmaing)
++		return;
++
++	/* Set DMA buffer size */
++	audio_count = (audio_append >= audio_appstart) ?
++		(audio_append - audio_appstart) :
++		(BUFSIZE - audio_appstart);
++	if (audio_count > DMASIZE)
++		audio_count = DMASIZE;
++
++	/* Adjust pointers and counters accordingly */
++	audio_appstart += audio_count;
++	if (audio_appstart >= BUFSIZE)
++		audio_appstart = 0;
++
++	if (audio_count > 0)
++		ssi_audio_dmarun();
++	else {
++		audio_txbusy = 0;
++#ifdef AUDIO_DEBUG
++		printk(DRIVER_NAME ":DMA buffer is empty!\n");
++#endif
++	}
++}
++
++void __inline__ stop_dma(void) {
++	stop_edma_transfer(DMA_TCD);
++	stop_edma_transfer(DMA_TCD2);
++}
++
++static int ssi_audio_dma_handler_empty(int channel, void *dev_id)
++{
++	return IRQ_HANDLED;
++}
++
++static int ssi_audio_dma_handler(int channel, void *dev_id)
++{
++#ifdef AUDIO_DEBUG
++	printk(DRIVER_NAME ":ssi_audio_dma_handler(channel=%d)\n", channel);
++#endif
++
++	/* Clear DMA interrupt */
++	stop_dma();
++
++	audio_device->dmaing = 0;
++
++	/* Update data pointers and counts */
++	audio_start += audio_count;
++	if (audio_start >= BUFSIZE)
++		audio_start = 0;
++	audio_count = 0;
++
++	/* Start new DMA buffer if we can */
++	ssi_audio_dmabuf();
++
++	return IRQ_HANDLED;
++}
++
++static void init_dma(void)
++{
++	/* SSI DMA Signals mapped to DMA request */
++	MCF_CCM_MISCCR &= ~MCF_CCM_MISCCR_TIMDMA;
++	init_edma();
++}
++
++#endif	/* CONFIG_SSIAUDIO_USE_EDMA */
++
++
++/* Write CODEC register using SPI
++ *   address - CODEC register address
++ *   data - data to be written into register
++ */
++static int codec_write(u8 addr, u16 data)
++{
++	u16 spi_word;
++
++	if (audio_device==NULL || audio_device->spi==NULL)
++		return -ENODEV;
++
++	spi_word = ((addr & 0x7F)<<9)|(data & 0x1FF);
++	return spi_write(audio_device->spi, (const u8*)&spi_word, sizeof(spi_word));
++}
++
++static inline void enable_ssi(void)
++{
++	if (audio_device==NULL || audio_device->ssi_enabled) return;
++	audio_device->ssi_enabled = 1;
++	MCF_SSI_CR |= MCF_SSI_CR_SSI_EN;  /* enable SSI module */
++	MCF_SSI_CR |= MCF_SSI_CR_TE;  	  /* enable tranmitter */
++}
++
++static inline void disable_ssi(void)
++{
++	if (audio_device==NULL || audio_device->ssi_enabled==0) return;
++	MCF_SSI_CR &= ~MCF_SSI_CR_TE;  		/* disable transmitter */
++	MCF_SSI_CR &= ~MCF_SSI_CR_SSI_EN;	/* disable SSI module  */
++	audio_device->ssi_enabled = 0;
++}
++
++/* Audio CODEC initialization */
++/* TODO: also the SSI frequency/dividers must be adjusted */
++static void adjust_codec_speed(void) {
++#ifdef AUDIO_DEBUG
++	printk(DRIVER_NAME ":adjust_codec_speed: %d\n", audio_device->speed);
++#endif
++
++	if (audio_device->speed == 8000) {
++		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_8KHZ);
++	} else if (audio_device->speed == 16000) {
++		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_16KHZ);
++	} else if (audio_device->speed == 22000) {
++		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_22KHZ);
++	} else if (audio_device->speed == 44000 || audio_device->speed == 44100) {
++		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_44KHZ);
++	} else if (audio_device->speed == 48000) {
++		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_48KHZ);
++	} else {
++		/* default 44KHz */
++		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_44KHZ);
++	}
++}
++
++static void codec_reset(void)
++{
++	codec_write(CODEC_RESET_REG, 0); /* reset the audio chip */
++	udelay(1500); /* wait for reset */
++}
++
++static void init_audio_codec(void)
++{
++#ifdef AUDIO_DEBUG
++	printk(DRIVER_NAME ":init_audio_codec()\n");
++#endif
++	codec_reset();
++
++	codec_write(CODEC_LEFT_IN_REG, 0x017);
++	codec_write(CODEC_RIGHT_IN_REG, 0x017);
++	codec_write(CODEC_POWER_DOWN_REG, 0x000); /* Turn off line input */
++	codec_write(CODEC_DIGITAL_IF_FMT_REG, 0x00A); /* I2S slave mode */
++	/* codec_write(CODEC_DIGITAL_IF_FMT_REG, 0x042); // I2S master mode */
++	codec_write(CODEC_DIGITAL_APATH_REG, 0x007); /* Set A path */
++
++	/* set sample rate */
++    adjust_codec_speed();
++
++	codec_write(CODEC_LEFT_HP_VOL_REG, 0x075); /* set volume */
++	codec_write(CODEC_RIGHT_HP_VOL_REG, 0x075); /* set volume */
++	codec_write(CODEC_DIGITAL_IF_ACT_REG, 1); /* Activate digital interface */
++	codec_write(CODEC_ANALOG_APATH_REG, 0x0F2);
++}
++
++
++static void chip_init(void)
++{
++#ifdef CONFIG_SSIAUDIO_USE_EDMA
++	init_dma();
++#endif
++
++	/* Enable the SSI pins */
++	MCF_GPIO_PAR_SSI = ( 0
++							| MCF_GPIO_PAR_SSI_MCLK
++							| MCF_GPIO_PAR_SSI_STXD(3)
++							| MCF_GPIO_PAR_SSI_SRXD(3)
++							| MCF_GPIO_PAR_SSI_FS(3)
++							| MCF_GPIO_PAR_SSI_BCLK(3) );
++
++}
++
++static void init_ssi(void)
++{
++#ifdef AUDIO_DEBUG
++	printk(DRIVER_NAME ":init_ssi()\n");
++#endif
++
++	/* Dividers are for MCF54445 on 266Mhz, the output is 44.1Khz*/
++	/* Enable SSI clock in CCM */
++	MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(47);
++
++	/* Issue a SSI reset */
++	MCF_SSI_CR &= ~MCF_SSI_CR_SSI_EN;  /* disable SSI module */
++
++	/* SSI module uses internal CPU clock */
++	MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSISRC;
++
++	MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSIPUE;
++	MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSIPUS_UP;
++
++	MCF_SSI_CR = 0
++			| MCF_SSI_CR_CIS
++			| MCF_SSI_CR_TCH    /* Enable two channel mode */
++			| MCF_SSI_CR_MCE    /* Set clock out on SSI_MCLK pin */
++			| MCF_SSI_CR_I2S_MASTER    /* Set I2S master mode */
++			| MCF_SSI_CR_SYN      /* Enable synchronous mode */
++			| MCF_SSI_CR_NET
++			;
++
++	MCF_SSI_TCR = 0
++			| MCF_SSI_TCR_TXDIR  /* internally generated bit clock */
++			| MCF_SSI_TCR_TFDIR  /* internally generated frame sync */
++			| MCF_SSI_TCR_TSCKP  /* Clock data on falling edge of bit clock */
++			| MCF_SSI_TCR_TFSI   /* Frame sync active low */
++			| MCF_SSI_TCR_TEFS   /* TX frame sync 1 bit before data */
++			| MCF_SSI_TCR_TFEN0  /* TX FIFO 0 enabled */
++			| MCF_SSI_TCR_TFEN1  /* TX FIFO 1 enabled */
++			| MCF_SSI_TCR_TXBIT0
++			;
++
++	MCF_SSI_CCR = MCF_SSI_CCR_WL(7)  /* 16 bit word length */
++			| MCF_SSI_CCR_DC(1)  	 /* Frame rate divider */
++			| MCF_SSI_CCR_PM(0)
++			| MCF_SSI_CCR_DIV2
++			;
++
++	MCF_SSI_FCSR = 0
++			| MCF_SSI_FCSR_TFWM0(0)
++			| MCF_SSI_FCSR_TFWM1(0)
++			;
++
++	MCF_SSI_IER =   0 // interrupts
++#ifndef CONFIG_SSIAUDIO_USE_EDMA
++				| MCF_SSI_IER_TIE   /* transmit interrupts */
++				| MCF_SSI_IER_TFE0  /* transmit FIFO 0 empty */
++				| MCF_SSI_IER_TFE1  /* transmit FIFO 1 empty */
++#else
++				| MCF_SSI_IER_TDMAE /* DMA request enabled */
++				| MCF_SSI_IER_TFE0  /* transmit FIFO 0 empty */
++				| MCF_SSI_IER_TFE1  /* transmit FIFO 1 empty */
++#endif
++				;
++
++#ifndef CONFIG_SSIAUDIO_USE_EDMA
++	/* enable IRQ:  SSI interrupt */
++	MCF_INTC1_ICR(M5445x_AUDIO_IRQ_SOURCE) = M5445x_AUDIO_IRQ_LEVEL;
++	MCF_INTC1_CIMR = M5445x_AUDIO_IRQ_SOURCE;
++#endif
++}
++
++#ifndef CONFIG_SSIAUDIO_USE_EDMA
++/* interrupt for SSI */
++static int ssi_audio_isr(int irq, void *dev_id)
++{
++	unsigned long	*bp;
++
++	if (audio_txbusy==0) {
++		return IRQ_HANDLED;
++	}
++
++	spin_lock(&(audio_device->lock));
++
++	if (audio_start == audio_append) {
++		disable_ssi();
++		audio_txbusy = 0;
++	} else {
++		if (MCF_SSI_ISR & (MCF_SSI_ISR_TFE0|MCF_SSI_ISR_TFE1)) {
++			bp = (unsigned long *) &audio_device->audio_buf[audio_start];
++			if (audio_device->channel) {
++				MCF_SSI_TX1 = *bp;
++				audio_device->channel = 0;
++			} else {
++				MCF_SSI_TX0 = *bp;
++				audio_device->channel = 1;
++			}
++			audio_start += 4;
++			if (audio_start >= BUFSIZE)
++				audio_start = 0;
++		}
++	}
++
++	spin_unlock(&(audio_device->lock));
++
++	return IRQ_HANDLED;
++}
++#endif
++
++/* Set initial driver playback defaults. */
++static void init_driver_variables(void)
++{
++	audio_device->speed = 44100;
++	audio_device->format = AFMT_S16_LE;
++	audio_device->bits = 16;
++	audio_device->stereo = 1;
++	audio_device->ssi_enabled = 0;
++
++	audio_start = 0;
++	audio_count = 0;
++	audio_append = 0;
++	audio_appstart = 0;
++	audio_txbusy = 0;
++	audio_device->dmaing = 0;
++}
++
++/* open audio device */
++static int ssi_audio_open(struct inode *inode, struct file *filp)
++{
++#ifdef AUDIO_DEBUG
++	printk(DRIVER_NAME ":ssi_audio_open()\n");
++#endif
++
++	if (audio_device==NULL) return (-ENODEV);
++
++	if (audio_device->isopen)
++		return(-EBUSY);
++
++	spin_lock(&(audio_device->lock));
++
++	audio_device->isopen = 1;
++
++	init_driver_variables();
++	init_ssi();
++	init_audio_codec();
++
++	spin_unlock(&(audio_device->lock));
++
++	udelay(100);
++
++	return 0;
++}
++
++/* close audio device */
++static int ssi_audio_close(struct inode *inode, struct file *filp)
++{
++#ifdef AUDIO_DEBUG
++	printk(DRIVER_NAME ":ssi_audio_close()\n");
++#endif
++
++	if (audio_device==NULL) return (-ENODEV);
++
++	ssi_audio_txdrain();
++
++	spin_lock(&(audio_device->lock));
++
++#ifdef CONFIG_SSIAUDIO_USE_EDMA
++	stop_dma();
++#endif
++	disable_ssi();
++	codec_reset();
++	init_driver_variables();
++	audio_device->isopen = 0;
++
++	spin_unlock(&(audio_device->lock));
++	return 0;
++}
++
++/* write to audio device */
++static ssize_t ssi_audio_write(struct file *filp, const char *buf, size_t count, loff_t *ppos)
++{
++	unsigned long	*dp, *buflp;
++	unsigned short	*bufwp;
++	unsigned char	*bufbp;
++	unsigned int	slen, bufcnt, i, s, e;
++
++#ifdef AUDIO_DEBUG
++	printk(DRIVER_NAME ":ssi_audio_write(buf=%x,count=%d)\n", (int) buf, count);
++#endif
++
++	if (audio_device==NULL) return (-ENODEV);
++
++	if (count <= 0)
++		return 0;
++
++	spin_lock(&(audio_device->lock));
++
++	buflp = (unsigned long *) buf;
++	bufwp = (unsigned short *) buf;
++	bufbp = (unsigned char *) buf;
++
++	bufcnt = count & ~0x3;
++
++	bufcnt <<= 1;
++	if (audio_device->stereo == 0)
++		bufcnt <<= 1;
++	if (audio_device->bits == 8)
++		bufcnt <<= 1;
++
++tryagain:
++	/*
++	 *	Get a snapshot of buffer, so we can figure out how
++	 *	much data we can fit in...
++	 */
++	s = audio_start;
++	e = audio_append;
++	dp = (unsigned long *) &(audio_device->audio_buf[e]);
++
++	slen = ((s > e) ? (s - e) : (BUFSIZE - (e - s))) - 4;
++	if (slen > bufcnt)
++		slen = bufcnt;
++	if ((BUFSIZE - e) < slen)
++		slen = BUFSIZE - e;
++
++	if (slen == 0) {
++		if (signal_pending(current))
++			return(-ERESTARTSYS);
++		set_current_state(TASK_INTERRUPTIBLE);
++		schedule_timeout(1);
++		goto tryagain;
++	}
++
++	/* For DMA we need to have data as 32 bit
++	   values (since SSI TX register is 32 bit).
++	   So, the incomming 16 bit data must be put to buffer as 32 bit values.
++	   Also, the endianess is converted if needed
++	*/
++	if (audio_device->stereo) {
++		if (audio_device->bits == 16) {
++			if (audio_device->format==AFMT_S16_LE) {
++				/*- convert endianess, probably could be done by SSI also */
++				for (i = 0; (i < slen); i += 4) {
++					unsigned short val = le16_to_cpu((*bufwp++));
++					*dp++ = val;
++				}
++			} else {
++				for (i = 0; (i < slen); i += 4) {
++					*dp++ = *bufwp++;
++				}
++			}
++		} else {
++			for (i = 0; (i < slen); i += 4) {
++				*dp    = (((unsigned long) *bufbp++) << 24);
++				*dp++ |= (((unsigned long) *bufbp++) << 8);
++			}
++		}
++	} else {
++		if (audio_device->bits == 16) {
++			for (i = 0; (i < slen); i += 4) {
++				*dp++ = (((unsigned long)*bufwp)<<16) | *bufwp;
++				bufwp++;
++			}
++		} else {
++			for (i = 0; (i < slen); i += 4) {
++				*dp++ = (((unsigned long) *bufbp) << 24) |
++					(((unsigned long) *bufbp) << 8);
++				bufbp++;
++			}
++		}
++	}
++
++	e += slen;
++	if (e >= BUFSIZE)
++		e = 0;
++	audio_append = e;
++
++	/* If not outputing audio, then start now */
++	if (audio_txbusy == 0) {
++		audio_txbusy++;
++		audio_device->channel = 0;
++		enable_ssi();
++#ifdef CONFIG_SSIAUDIO_USE_EDMA
++		ssi_audio_dmabuf(); /* start first DMA transfer */
++#endif
++	}
++
++	bufcnt -= slen;
++
++	if (bufcnt > 0)
++		goto tryagain;
++
++	spin_unlock(&(audio_device->lock));
++
++	return count;
++}
++
++/* ioctl: control the driver */
++static int ssi_audio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
++{
++	long	val;
++	int	rc = 0;
++
++#ifdef AUDIO_DEBUG
++    printk(DRIVER_NAME ":ssi_audio_ioctl(cmd=%x,arg=%x)\n", (int) cmd, (int) arg);
++#endif
++
++	if (audio_device==NULL) return (-ENODEV);
++
++	switch (cmd) {
++
++	case SNDCTL_DSP_SPEED:
++		if (access_ok(VERIFY_READ, (void *) arg, sizeof(val))) {
++			get_user(val, (unsigned long *) arg);
++#ifdef AUDIO_DEBUG
++			printk(DRIVER_NAME ":ssi_audio_ioctl: SNDCTL_DSP_SPEED: %ld\n", val);
++#endif
++			ssi_audio_txdrain();
++			audio_device->speed = val;
++			init_audio_codec();
++		} else {
++			rc = -EINVAL;
++		}
++		break;
++
++	case SNDCTL_DSP_SAMPLESIZE:
++		if (access_ok(VERIFY_READ, (void *) arg, sizeof(val))) {
++			get_user(val, (unsigned long *) arg);
++			ssi_audio_txdrain();
++			ssi_audio_setsamplesize(val);
++		} else {
++			rc = -EINVAL;
++		}
++		break;
++
++	case SNDCTL_DSP_STEREO:
++		if (access_ok(VERIFY_READ, (void *) arg, sizeof(val))) {
++			get_user(val, (unsigned long *) arg);
++			ssi_audio_txdrain();
++			audio_device->stereo = val;
++		} else {
++			rc = -EINVAL;
++		}
++		break;
++
++	case SNDCTL_DSP_GETBLKSIZE:
++		if (access_ok(VERIFY_WRITE, (void *) arg, sizeof(long)))
++			put_user(BUFSIZE, (long *) arg);
++		else
++			rc = -EINVAL;
++		break;
++
++	case SNDCTL_DSP_SYNC:
++		ssi_audio_txdrain();
++		break;
++
++	default:
++		rc = -EINVAL;
++		break;
++	}
++
++	return rc;
++}
++
++/****************************************************************************/
++
++struct file_operations	ssi_audio_fops = {
++	open: ssi_audio_open,		/* open */
++	release: ssi_audio_close,	/* close */
++	write: ssi_audio_write,		/* write */
++	ioctl: ssi_audio_ioctl,		/* ioctl */
++};
++
++/* initialize audio driver */
++static int __devinit ssi_audio_probe(struct spi_device *spi)
++{
++	struct ssi_audio	*audio;
++	int	err;
++
++#ifdef AUDIO_DEBUG
++	printk(DRIVER_NAME": probe\n");
++#endif
++
++	if (!spi->irq) {
++		dev_dbg(&spi->dev, "no IRQ?\n");
++		return -ENODEV;
++	}
++
++	/* don't exceed max specified sample rate */
++	if (spi->max_speed_hz > MAX_SPEED_HZ) {
++		dev_dbg(&spi->dev, "f(sample) %d KHz?\n",
++				(spi->max_speed_hz)/1000);
++		return -EINVAL;
++	}
++
++	/* register charcter device */
++	if (register_chrdev(SOUND_MAJOR, SOUND_DEVICE_NAME, &ssi_audio_fops) < 0) {
++		printk(KERN_WARNING DRIVER_NAME ": failed to register major %d\n", SOUND_MAJOR);
++		dev_dbg(&spi->dev, DRIVER_NAME ": failed to register major %d\n", SOUND_MAJOR);
++		return -ENODEV;
++	}
++
++	audio = kzalloc(sizeof(struct ssi_audio), GFP_KERNEL);
++	if (!audio) {
++		err = -ENOMEM;
++		goto err_out;
++	}
++
++	/* DMA buffer must be from GFP_DMA zone, so it will not be cached */
++	audio->audio_buf = kmalloc(BUFSIZE, GFP_DMA);
++	if (audio->audio_buf == NULL) {
++		dev_dbg(&spi->dev, DRIVER_NAME ": failed to allocate DMA[%d] buffer\n", BUFSIZE);
++		err = -ENOMEM;
++		goto err_free_mem;
++	}
++
++	audio_device = audio;
++
++	dev_set_drvdata(&spi->dev, audio);
++	spi->dev.power.power_state = PMSG_ON;
++
++	audio->spi = spi;
++
++#ifndef CONFIG_SSIAUDIO_USE_EDMA
++	if (request_irq(spi->irq, ssi_audio_isr, SA_INTERRUPT,	spi->dev.bus_id, audio)) {
++		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
++		err = -EBUSY;
++		goto err_free_mem;
++	}
++
++#else
++	/* request 2 eDMA channels since two channel output mode is used */
++	if (request_edma_channel(DMA_TCD,
++							ssi_audio_dma_handler_empty,
++							NULL,
++							audio,
++							&(audio_device->lock),
++							DRIVER_NAME
++							)!=0)
++	{
++		dev_dbg(&spi->dev, "DMA channel %d busy?\n", DMA_TCD);
++		err = -EBUSY;
++		goto err_free_mem;
++	}
++	if (request_edma_channel(DMA_TCD2,
++							ssi_audio_dma_handler,
++							NULL,
++							audio,
++							&(audio_device->lock),
++							DRIVER_NAME
++							)!=0)
++	{
++		dev_dbg(&spi->dev, "DMA channel %d busy?\n", DMA_TCD2);
++		err = -EBUSY;
++		goto err_free_mem;
++	}
++
++#endif
++	chip_init();
++	printk(DRIVER_NAME ": Probed successfully\n");
++
++	return 0;
++
++ err_free_mem:
++ 	kfree(audio);
++	audio_device = NULL;
++ err_out:
++ 	unregister_chrdev(SOUND_MAJOR, SOUND_DEVICE_NAME);
++	return err;
++}
++
++static int __devexit ssi_audio_remove(struct spi_device *spi)
++{
++	struct ssi_audio *audio = dev_get_drvdata(&spi->dev);
++
++	ssi_audio_txdrain();
++#ifndef CONFIG_SSIAUDIO_USE_EDMA
++	free_irq(spi->irq, audio);
++#else
++	free_edma_channel(DMA_TCD, audio);
++	free_edma_channel(DMA_TCD2, audio);
++#endif
++	kfree(audio->audio_buf);
++	kfree(audio);
++	audio_device = NULL;
++	unregister_chrdev(SOUND_MAJOR, SOUND_DEVICE_NAME);
++	dev_dbg(&spi->dev, "unregistered audio\n");
++	return 0;
++}
++
++static int ssi_audio_suspend(struct spi_device *spi, pm_message_t message) {
++	return 0;
++}
++
++static int ssi_audio_resume(struct spi_device *spi) {
++	return 0;
++}
++
++static struct spi_driver ssi_audio_driver = {
++	.driver = {
++		.name	= DRIVER_NAME,
++		.bus	= &spi_bus_type,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= ssi_audio_probe,
++	.remove		= __devexit_p(ssi_audio_remove),
++	.suspend	= ssi_audio_suspend,
++	.resume		= ssi_audio_resume,
++};
++
++static int __init ssi_audio_init(void)
++{
++	return spi_register_driver(&ssi_audio_driver);
++}
++module_init(ssi_audio_init);
++
++static void __exit ssi_audio_exit(void)
++{
++	spi_unregister_driver(&ssi_audio_driver);
++}
++module_exit(ssi_audio_exit);
++
++MODULE_DESCRIPTION("SSI/I2S Audio Driver");
++MODULE_LICENSE("GPL");
+--- a/include/asm-m68k/coldfire_edma.h
++++ b/include/asm-m68k/coldfire_edma.h
+@@ -1,39 +1,102 @@
++/*
++ * coldfire_edma.h - eDMA driver for Coldfire MCF5445x
++ *
++ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
+ #ifndef _LINUX_COLDFIRE_DMA_H
+ #define _LINUX_COLDFIRE_DMA_H
+ 
+ #include <linux/interrupt.h>
++#include <asm/mcf5445x_edma.h>
+ 
+-#define EDMA_DRIVER_NAME 		"ColdFire-eDMA"
+-#define DMA_DEV_MINOR 			1
++#define EDMA_DRIVER_NAME "ColdFire-eDMA"
++#define DMA_DEV_MINOR 1
+ 
+ #define EDMA_INT_CHANNEL_BASE 		8
+ #define EDMA_INT_CONTROLLER_BASE 	64
+ #define EDMA_CHANNELS			16
+-
++ 
+ #define EDMA_IRQ_LEVEL			5
+-
++ 
+ typedef irqreturn_t (*edma_irq_handler)(int, void *);
+ typedef void (*edma_error_handler)(int, void *);
+-
++ 
++/* Setup transfer control descriptor (TCD)
++ *   channel - descriptor number
++ *   source  - source address
++ *   dest    - destination address
++ *   attr    - attributes
++ *   soff    - source offset
++ *   nbytes  - number of bytes to be transfered in minor loop
++ *   slast   - last source address adjustment
++ *   citer   - major loop count
++ *   biter   - beggining minor loop count
++ *   doff    - destination offset
++ *   dlast_sga - last destination address adjustment
++ *   major_int - generate interrupt after each major loop
++ *   disable_req - disable DMA request after major loop
++ */
+ void set_edma_params(int channel, u32 source, u32 dest,
+-	u32 attr, u32 soff, u32 nbytes, u32 slast,
+-	u32 citer, u32 biter, u32 doff, u32 dlast_sga);
+-
+-void start_edma_transfer(int channel, int major_int);
+-
+-void stop_edma_transfer(int channel);
+-
+-void confirm_edma_interrupt_handled(int channel);
+-
++		u32 attr, u32 soff, u32 nbytes, u32 slast,
++		u32 citer, u32 biter, u32 doff, u32 dlast_sga,
++		int major_int, int disable_req);
++
++/* Starts eDMA transfer on specified channel
++ *   channel - eDMA TCD number
++ */
++static inline void  start_edma_transfer(int channel)
++{
++	MCF_EDMA_SERQ = channel;
++	MCF_EDMA_SSRT = channel;
++}
++
++/* Stops eDMA transfer
++ *   channel - eDMA TCD number
++ */
++static inline void stop_edma_transfer(int channel)
++{
++	MCF_EDMA_CINT = channel;
++	MCF_EDMA_CERQ = channel;
++}
++
++
++/* Confirm that interrupt has been handled
++ *   channel - eDMA TCD number
++ */
++static inline void confirm_edma_interrupt_handled(int channel)
++{
++	MCF_EDMA_CINT = channel;
++}
++ 
++/* Initialize eDMA controller */
+ void init_edma(void);
+-
+-int  request_edma_channel(int channel,
+-			edma_irq_handler handler,
+-			edma_error_handler error_handler,
+-			void *dev,
+-			spinlock_t *lock,
+-			const char *device_id);
+-
++ 
++/* Request eDMA channel:
++ *   channel - eDMA TCD number
++ *   handler - channel IRQ callback
++ *   error_handler - error interrupt handler callback for channel
++ *   dev - device
++ *   lock - spinlock to be locked (can be NULL)
++ *   device_id - device driver name for proc file system output
++ */
++int request_edma_channel(int channel,
++		edma_irq_handler handler,
++		edma_error_handler error_handler,
++		void *dev,
++		spinlock_t *lock,
++		const char *device_id);
++  
++/* Free eDMA channel
++ *  channel - eDMA TCD number
++ *  dev - device
++ */
+ int free_edma_channel(int channel, void *dev);
+-
+ #endif
+--- /dev/null
++++ b/include/linux/spi/mcfqspi.h
+@@ -0,0 +1,80 @@
++/****************************************************************************/
++
++/*
++ *	mcfqspi.c - Master QSPI controller for the ColdFire processors
++ *
++ *	(C) Copyright 2005, Intec Automation,
++ *			    Mike Lavender (mike@steroidmicros)
++ *
++
++     This program is free software; you can redistribute it and/or modify
++     it under the terms of the GNU General Public License as published by
++     the Free Software Foundation; either version 2 of the License, or
++     (at your option) any later version.
++
++     This program is distributed in the hope that it will be useful,
++     but WITHOUT ANY WARRANTY; without even the implied warranty of
++     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++     GNU General Public License for more details.
++
++     You should have received a copy of the GNU General Public License
++     along with this program; if not, write to the Free Software
++     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
++/* ------------------------------------------------------------------------- */
++
++#ifndef MCFQSPI_H_
++#define MCFQSPI_H_
++
++#define QSPI_CS_INIT		0x01
++#define QSPI_CS_ASSERT		0x02
++#define QSPI_CS_DROP		0x04
++
++#define QSPIIOCS_DOUT_HIZ	1	/* QMR[DOHIE] set hi-z dout between transfers */
++#define QSPIIOCS_BITS		2	/* QMR[BITS] set transfer size */
++#define QSPIIOCG_BITS		3	/* QMR[BITS] get transfer size */
++#define QSPIIOCS_CPOL		4	/* QMR[CPOL] set SCK inactive state */
++#define QSPIIOCS_CPHA		5	/* QMR[CPHA] set SCK phase, 1=rising edge */
++#define QSPIIOCS_BAUD		6	/* QMR[BAUD] set SCK baud rate divider */
++#define QSPIIOCS_QCD		7	/* QDLYR[QCD] set start delay */
++#define QSPIIOCS_DTL		8	/* QDLYR[DTL] set after delay */
++#define QSPIIOCS_CONT		9	/* continuous CS asserted during transfer */
++#define QSPIIOCS_READDATA	10	/* set data send during read */
++#define QSPIIOCS_ODD_MOD	11	/* if length of buffer is a odd number, 16-bit transfers */
++					/* are finalized with a 8-bit transfer */
++#define QSPIIOCS_DSP_MOD	12	/* transfers are bounded to 15/30 bytes (a multiple of 3 bytes = 1 DSPword) */
++#define QSPIIOCS_POLL_MOD	13	/* driver uses polling instead of interrupts */
++
++#define QSPIIOCS_SET_CSIV	14	/* sets CSIV flag (cs inactive level) */
++
++#ifdef CONFIG_M520x
++#undef  MCF_GPIO_PAR_QSPI
++#define MCF_GPIO_PAR_QSPI      (0xA4034)
++#endif
++
++struct coldfire_spi_master {
++	u16 bus_num;
++	u16 num_chipselect;
++	u8  irq_source;
++	u32 irq_vector;
++	u32 irq_mask;
++	u8  irq_lp;
++	u8  par_val;
++	u16 par_val16;
++	void (*cs_control)(u8 cs, u8 command);
++};
++
++
++struct coldfire_spi_chip {
++	u8 mode;
++	u8 bits_per_word;
++	u8 del_cs_to_clk;
++	u8 del_after_trans;
++	u16 void_write_data;
++};
++
++typedef struct qspi_read_data {
++        __u32 length;
++        __u8 *buf;                   /* data to send during read */
++        unsigned int loop : 1;
++} qspi_read_data;
++#endif /*MCFQSPI_H_*/
diff --git a/target/linux/coldfire/patches/020-mcfv4e_inline_memory_params.patch b/target/linux/coldfire/patches/020-mcfv4e_inline_memory_params.patch
new file mode 100644
index 0000000000..bd1769d080
--- /dev/null
+++ b/target/linux/coldfire/patches/020-mcfv4e_inline_memory_params.patch
@@ -0,0 +1,168 @@
+From 3f698a1cf08cc02911cdb2ca3217be77eeba794b Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 27 Nov 2007 23:17:53 -0700
+Subject: [PATCH] Change inline assembly memory params.
+
+For various routines change how the assembly memory pointer
+is passed in.
+
+LTIBName: mcfv4e-inline-memory-params
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ include/asm-m68k/bitops.h |   68 ++++++++++++++++++++++++++++++++++++++++++++-
+ 1 files changed, 67 insertions(+), 1 deletions(-)
+
+--- a/include/asm-m68k/bitops.h
++++ b/include/asm-m68k/bitops.h
+@@ -465,7 +465,7 @@ static inline int ext2_find_next_bit(con
+    __constant_coldfire_test_and_set_bit(nr, vaddr) :	\
+    __generic_coldfire_test_and_set_bit(nr, vaddr))
+ 
+-
++#if 0
+ static __inline__ int __constant_coldfire_test_and_set_bit(int nr,
+ 	volatile void *vaddr)
+ {
+@@ -477,6 +477,17 @@ static __inline__ int __constant_coldfir
+ 	     : "di" (nr & 7));
+ 	return retval;
+ }
++#else
++static __inline__ int __constant_coldfire_test_and_set_bit(int nr,volatile void * vaddr)
++{
++	char retval;
++	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
++	__asm__ __volatile__ ("bset %2,(%4); sne %0"
++	     : "=d" (retval), "=m" (*p)
++	     : "di" (nr & 7), "m" (*p), "a" (p));
++	return retval;
++}
++#endif
+ 
+ static __inline__ int __generic_coldfire_test_and_set_bit(int nr,
+ 	volatile void *vaddr)
+@@ -496,6 +507,7 @@ static __inline__ int __generic_coldfire
+    __constant_coldfire_set_bit(nr, vaddr) :	\
+    __generic_coldfire_set_bit(nr, vaddr))
+ 
++#if 0
+ static __inline__ void __constant_coldfire_set_bit(int nr,
+ 	volatile void *vaddr)
+ {
+@@ -503,6 +515,14 @@ static __inline__ void __constant_coldfi
+ 	__asm__ __volatile__ ("bset %1,%0"
+ 	     : "+QUd" (*p) : "di" (nr & 7));
+ }
++#else
++static __inline__ void __constant_coldfire_set_bit(int nr, volatile void * vaddr)
++{
++	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
++	__asm__ __volatile__ ("bset %1,(%3)"
++	     : "=m" (*p) : "di" (nr & 7), "m" (*p), "a" (p));
++}
++#endif
+ 
+ static __inline__ void __generic_coldfire_set_bit(int nr, volatile void *vaddr)
+ {
+@@ -518,6 +538,7 @@ static __inline__ void __generic_coldfir
+    __constant_coldfire_test_and_clear_bit(nr, vaddr) :	\
+    __generic_coldfire_test_and_clear_bit(nr, vaddr))
+ 
++#if 0
+ static __inline__ int __constant_coldfire_test_and_clear_bit(int nr,
+ 	volatile void *vaddr)
+ {
+@@ -530,6 +551,19 @@ static __inline__ int __constant_coldfir
+ 
+ 	return retval;
+ }
++#else
++static __inline__ int __constant_coldfire_test_and_clear_bit(int nr, volatile void *vaddr)
++{
++	char retval;
++	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
++
++	__asm__ __volatile__ ("bclr %2,(%4); sne %0"
++	     : "=d" (retval), "=m" (*p)
++	     : "id" (nr & 7), "m" (*p), "a" (p));
++
++	return retval;
++}
++#endif
+ 
+ static __inline__ int __generic_coldfire_test_and_clear_bit(int nr,
+ 	volatile void *vaddr)
+@@ -556,6 +590,7 @@ static __inline__ int __generic_coldfire
+    __constant_coldfire_clear_bit(nr, vaddr) :	\
+    __generic_coldfire_clear_bit(nr, vaddr))
+ 
++#if 0
+ static __inline__ void __constant_coldfire_clear_bit(int nr,
+ 	volatile void *vaddr)
+ {
+@@ -563,6 +598,14 @@ static __inline__ void __constant_coldfi
+ 	__asm__ __volatile__ ("bclr %1,%0"
+ 	     : "+QUd" (*p) : "id" (nr & 7));
+ }
++#else
++static __inline__ void __constant_coldfire_clear_bit(int nr, volatile void * vaddr)
++{
++	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
++	__asm__ __volatile__ ("bclr %1,(%3)"
++	     : "=m" (*p) : "id" (nr & 7), "m" (*p), "a" (p));
++}
++#endif
+ 
+ static __inline__ void __generic_coldfire_clear_bit(int nr,
+ 	volatile void *vaddr)
+@@ -579,6 +622,7 @@ static __inline__ void __generic_coldfir
+    __constant_coldfire_test_and_change_bit(nr, vaddr) :	\
+    __generic_coldfire_test_and_change_bit(nr, vaddr))
+ 
++#if 0
+ static __inline__ int __constant_coldfire_test_and_change_bit(int nr,
+ 	volatile void *vaddr)
+ {
+@@ -591,6 +635,19 @@ static __inline__ int __constant_coldfir
+ 
+ 	return retval;
+ }
++#else
++static __inline__ int __constant_coldfire_test_and_change_bit(int nr, volatile void * vaddr)
++{
++	char retval;
++	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
++
++	__asm__ __volatile__ ("bchg %2,(%4); sne %0"
++	     : "=d" (retval), "=m" (*p)
++	     : "id" (nr & 7), "m" (*p), "a" (p));
++
++	return retval;
++}
++#endif
+ 
+ static __inline__ int __generic_coldfire_test_and_change_bit(int nr,
+ 	volatile void *vaddr)
+@@ -612,6 +669,7 @@ static __inline__ int __generic_coldfire
+    __constant_coldfire_change_bit(nr, vaddr) :	\
+    __generic_coldfire_change_bit(nr, vaddr))
+ 
++#if 0
+ static __inline__ void __constant_coldfire_change_bit(int nr,
+ 	volatile void *vaddr)
+ {
+@@ -619,6 +677,14 @@ static __inline__ void __constant_coldfi
+ 	__asm__ __volatile__ ("bchg %1,%0"
+ 	     : "+QUd" (*p) : "id" (nr & 7));
+ }
++#else
++static __inline__ void __constant_coldfire_change_bit(int nr, volatile void * vaddr)
++{
++	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
++	__asm__ __volatile__ ("bchg %1,(%3)"
++	     : "=m" (*p) : "id" (nr & 7), "m" (*p), "a" (p));
++}
++#endif
+ 
+ static __inline__ void __generic_coldfire_change_bit(int nr,
+ 	volatile void *vaddr)
diff --git a/target/linux/coldfire/patches/021-m5445x_usb_premerge.patch b/target/linux/coldfire/patches/021-m5445x_usb_premerge.patch
new file mode 100644
index 0000000000..4650aae6e4
--- /dev/null
+++ b/target/linux/coldfire/patches/021-m5445x_usb_premerge.patch
@@ -0,0 +1,45 @@
+From 3d7f85e904cf9dab191eeab9933ecac1e90d06e4 Mon Sep 17 00:00:00 2001
+From: Bruce Schmid <duck@freescale.com>
+Date: Thu, 29 Nov 2007 16:30:47 -0700
+Subject: [PATCH] USB pre-merge
+
+LTIBName: m5445x-usb-premerge
+Signed-off-by: Duck <duck@freescale.com>
+---
+ drivers/usb/host/ehci-arc.c |   18 +++++++++++++++++-
+ 1 files changed, 17 insertions(+), 1 deletions(-)
+
+--- a/drivers/usb/host/ehci-arc.c
++++ b/drivers/usb/host/ehci-arc.c
+@@ -373,14 +373,30 @@ static int ehci_fsl_drv_resume(struct pl
+ 	pr_debug("%s pdev=0x%p  pdata=0x%p  ehci=0x%p  hcd=0x%p\n",
+ 		 __FUNCTION__, pdev, pdata, ehci, hcd);
+ 
+-	pr_debug("%s ehci->regs=0x%p  hcd->regs=0x%p",
++	pr_debug("%s ehci->regs=0x%p  hcd->regs=0x%p\n",
+ 		 __FUNCTION__, ehci->regs, hcd->regs);
+ 
+ 	memcpy(ehci->regs, (void *)&usb_ehci_regs, sizeof(struct ehci_regs));
++
++#if 0 // DDD test
+ 	ehci_writel(ehci, usb_ehci_portsc, &ehci->regs->port_status[0]);
++	printk("set portsc %08x  %08x\n", usb_ehci_portsc,
++		ehci_readl(ehci,  &ehci->regs->port_status[0]));
++	printk("set usbmode %08x\n", 
++		ehci_readl(ehci,  &ehci->regs + FSL_SOC_USB_USBMODE));
+ 
+ 	tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
+ 	ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
++#else
++	tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
++	ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
++	printk("tmp %08x  set usbmode %08x\n", tmp,
++		ehci_readl(ehci,  hcd->regs + FSL_SOC_USB_USBMODE));
++
++	ehci_writel(ehci, usb_ehci_portsc, &ehci->regs->port_status[0]);
++	printk("set portsc %08x  %08x\n", usb_ehci_portsc,
++		ehci_readl(ehci,  &ehci->regs->port_status[0]));
++#endif
+ 
+ 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ 	hcd->state = HC_STATE_RUNNING;
diff --git a/target/linux/coldfire/patches/022-m5445x_ccm_bitdefs.patch b/target/linux/coldfire/patches/022-m5445x_ccm_bitdefs.patch
new file mode 100644
index 0000000000..dbaae3a5d3
--- /dev/null
+++ b/target/linux/coldfire/patches/022-m5445x_ccm_bitdefs.patch
@@ -0,0 +1,54 @@
+From b100a50c3bf7884a97d5008fc79d9b45f3b6e999 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Fri, 30 Nov 2007 12:55:12 -0700
+Subject: [PATCH] Fix bitfield definitions.
+
+LTIBName: m5445x-ccm-bitdefs
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ include/asm-m68k/mcf5445x_ccm.h |   34 ++++++++++++++++++----------------
+ 1 files changed, 18 insertions(+), 16 deletions(-)
+
+--- a/include/asm-m68k/mcf5445x_ccm.h
++++ b/include/asm-m68k/mcf5445x_ccm.h
+@@ -118,22 +118,24 @@
+ #define MCF_CCM_MISCCR_BMT(x)           (((x) & 0x0007) << 8)	/* Bus monitor timing field */
+ #define MCF_CCM_MISCCR_BME              (0x0800)	/* Bus monitor external enable bit */
+ #define MCF_CCM_MISCCR_LIMP             (0x1000)	/* Limp mode enable */
+-#define MCF_CCM_MISCCR_BMT_65536        (0)
+-#define MCF_CCM_MISCCR_BMT_32768        (1)
+-#define MCF_CCM_MISCCR_BMT_16384        (2)
+-#define MCF_CCM_MISCCR_BMT_8192         (3)
+-#define MCF_CCM_MISCCR_BMT_4096         (4)
+-#define MCF_CCM_MISCCR_BMT_2048         (5)
+-#define MCF_CCM_MISCCR_BMT_1024         (6)
+-#define MCF_CCM_MISCCR_BMT_512          (7)
+-#define MCF_CCM_MISCCR_SSIPUS_UP        (1)
+-#define MCF_CCM_MISCCR_SSIPUS_DOWN      (0)
+-#define MCF_CCM_MISCCR_TIMDMA_TIM       (1)
+-#define MCF_CCM_MISCCR_TIMDMA_SSI       (0)
+-#define MCF_CCM_MISCCR_SSISRC_CLKIN     (0)
+-#define MCF_CCM_MISCCR_SSISRC_PLL       (1)
+-#define MCF_CCM_MISCCR_USBOC_ACTHI      (0)
+-#define MCF_CCM_MISCCR_USBOV_ACTLO      (1)
++#define MCF_CCM_MISCCR_BMT_65536        (0 << 8)
++#define MCF_CCM_MISCCR_BMT_32768        (1 << 8)
++#define MCF_CCM_MISCCR_BMT_16384        (2 << 8)
++#define MCF_CCM_MISCCR_BMT_8192         (3 << 8)
++#define MCF_CCM_MISCCR_BMT_4096         (4 << 8)
++#define MCF_CCM_MISCCR_BMT_2048         (5 << 8)
++#define MCF_CCM_MISCCR_BMT_1024         (6 << 8)
++#define MCF_CCM_MISCCR_BMT_512          (7 << 8)
++#define MCF_CCM_MISCCR_SSIPUE_UP        (1 << 7)
++#define MCF_CCM_MISCCR_SSIPUE_DOWN      (0 << 7)
++#define MCF_CCM_MISCCR_SSIPUS_UP        (1 << 6)
++#define MCF_CCM_MISCCR_SSIPUS_DOWN      (0 << 6)
++#define MCF_CCM_MISCCR_TIMDMA_TIM       (1 << 5)
++#define MCF_CCM_MISCCR_TIMDMA_SSI       (0 << 5)
++#define MCF_CCM_MISCCR_SSISRC_CLKIN     (0 << 4)
++#define MCF_CCM_MISCCR_SSISRC_PLL       (1 << 4)
++#define MCF_CCM_MISCCR_USBOC_ACTHI      (0 << 1)
++#define MCF_CCM_MISCCR_USBOC_ACTLO      (1 << 1)
+ #define MCF_CCM_MISCCR_USBSRC_CLKIN     (0)
+ #define MCF_CCM_MISCCR_USBSRC_PLL       (1)
+ 
diff --git a/target/linux/coldfire/patches/023-mcfv4e_cache_base_update.patch b/target/linux/coldfire/patches/023-mcfv4e_cache_base_update.patch
new file mode 100644
index 0000000000..9215085a06
--- /dev/null
+++ b/target/linux/coldfire/patches/023-mcfv4e_cache_base_update.patch
@@ -0,0 +1,1194 @@
+From 3592cd3db82e5b010df590079f1e310b5d317248 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Mon, 3 Dec 2007 23:03:07 -0700
+Subject: [PATCH] Rewrite Coldfire cache code.
+
+LTIBName: mcfv4e-cache-base-update
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/cache.c       |  196 +-------------
+ arch/m68k/coldfire/head.S        |    6 +-
+ arch/m68k/coldfire/signal.c      |    4 +-
+ arch/m68k/kernel/sys_m68k.c      |   16 ++
+ arch/m68k/mm/cache.c             |   31 +---
+ arch/m68k/mm/memory.c            |   76 +-----
+ include/asm-m68k/cf_cacheflush.h |  525 +++++++++++++++++++++++++++++---------
+ include/asm-m68k/cfcache.h       |   95 ++++----
+ 8 files changed, 495 insertions(+), 454 deletions(-)
+
+--- a/arch/m68k/coldfire/cache.c
++++ b/arch/m68k/coldfire/cache.c
+@@ -1,7 +1,8 @@
+ /*
+- *  linux/arch/m68k/coldifre/cache.c
++ *  linux/arch/m68k/coldfire/cache.c
+  *
+  *  Matt Waddel Matt.Waddel@freescale.com
++ *  Kurt Mahan kmahan@freescale.com
+  *  Copyright Freescale Semiconductor, Inc. 2007
+  *
+  *  This program is free software; you can redistribute it and/or modify
+@@ -15,191 +16,13 @@
+ #include <asm/coldfire.h>
+ #include <asm/system.h>
+ 
+-#define _DCACHE_SIZE (2*16384)
+-#define _ICACHE_SIZE (2*16384)
+-
+-#define _SET_SHIFT 4
+-
+-/*
+- * Masks for cache sizes.  Programming note: because the set size is a
+- * power of two, the mask is also the last address in the set.
+- */
+-
+-#define _DCACHE_SET_MASK ((_DCACHE_SIZE/64-1)<<_SET_SHIFT)
+-#define _ICACHE_SET_MASK ((_ICACHE_SIZE/64-1)<<_SET_SHIFT)
+-#define LAST_DCACHE_ADDR _DCACHE_SET_MASK
+-#define LAST_ICACHE_ADDR _ICACHE_SET_MASK
+-
+-/************************************************************
+- *  Routine to cleanly flush the cache, pushing all lines and
+- *  invalidating them.
+- *
+- *  The is the flash-resident version, used after copying the .text
+- *  segment from flash to ram.
+- *************************************************************/
+-void FLASHDcacheFlushInvalidate(void)
+-	__attribute__ ((section (".text_loader")));
+-
+-void FLASHDcacheFlushInvalidate()
+-{
+-	unsigned long set;
+-	unsigned long start_set;
+-	unsigned long end_set;
+-
+-	start_set = 0;
+-	end_set = (unsigned long)LAST_DCACHE_ADDR;
+-
+-	for (set = start_set; set < end_set; set += (0x10 - 3))
+-		asm volatile("cpushl %%dc,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%dc,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%dc,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%dc,(%0)" : : "a" (set));
+-}
+-
+-/************************************************************
+- *  Routine to cleanly flush the cache, pushing all lines and
+- *  invalidating them.
+- *
+- *************************************************************/
+-void DcacheFlushInvalidate()
+-{
+-	unsigned long set;
+-	unsigned long start_set;
+-	unsigned long end_set;
+-
+-	start_set = 0;
+-	end_set = (unsigned long)LAST_DCACHE_ADDR;
+-
+-	for (set = start_set; set < end_set; set += (0x10 - 3))
+-		asm volatile("cpushl %%dc,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%dc,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%dc,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%dc,(%0)" : : "a" (set));
+-}
+-
+-
+-
+-/******************************************************************************
+- *  Routine to cleanly flush the a block of cache, pushing all relevant lines
+- *  and invalidating them.
+- *
+- ******************************************************************************/
+-void DcacheFlushInvalidateCacheBlock(void *start, unsigned long size)
+-{
+-	unsigned long set;
+-	unsigned long start_set;
+-	unsigned long end_set;
+-
+-	/* if size is bigger than the cache can store
+-	 * set the size to the maximum amount
+-	 */
+-
+-	if (size > LAST_DCACHE_ADDR)
+-		size = LAST_DCACHE_ADDR;
+-
+-	start_set = ((unsigned long)start) & _DCACHE_SET_MASK;
+-	end_set = ((unsigned long)(start+size-1)) & _DCACHE_SET_MASK;
+-
+-	if (start_set > end_set) {
+-		/* from the begining to the lowest address */
+-		for (set = 0; set <= end_set; set += (0x10 - 3))
+-			asm volatile("cpushl %%dc,(%0)\n"
+-				     "\taddq%.l #1,%0\n"
+-				     "\tcpushl %%dc,(%0)\n"
+-				     "\taddq%.l #1,%0\n"
+-				     "\tcpushl %%dc,(%0)\n"
+-				     "\taddq%.l #1,%0\n"
+-				     "\tcpushl %%dc,(%0)" : : "a" (set));
+-
+-		/* next loop will finish the cache ie pass the hole */
+-		end_set = LAST_DCACHE_ADDR;
+-	}
+-	for (set = start_set; set <= end_set; set += (0x10 - 3))
+-		asm volatile("cpushl %%dc,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%dc,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%dc,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%dc,(%0)" : : "a" (set));
+-}
+-
+-
+-void IcacheInvalidateCacheBlock(void *start, unsigned long size)
+-{
+-	unsigned long set;
+-	unsigned long start_set;
+-	unsigned long end_set;
+-
+-	/* if size is bigger than the cache can store
+-	 * set the size to the maximum ammount
+-	 */
+-
+-	if (size > LAST_ICACHE_ADDR)
+-		size = LAST_ICACHE_ADDR;
+-
+-	start_set = ((unsigned long)start) & _ICACHE_SET_MASK;
+-	end_set = ((unsigned long)(start+size-1)) & _ICACHE_SET_MASK;
+-
+-	if (start_set > end_set) {
+-		/* from the begining to the lowest address */
+-		for (set = 0; set <= end_set; set += (0x10 - 3))
+-			asm volatile("cpushl %%ic,(%0)\n"
+-				     "\taddq%.l #1,%0\n"
+-				     "\tcpushl %%ic,(%0)\n"
+-				     "\taddq%.l #1,%0\n"
+-				     "\tcpushl %%ic,(%0)\n"
+-				     "\taddq%.l #1,%0\n"
+-				     "\tcpushl %%ic,(%0)" : : "a" (set));
+-
+-		/* next loop will finish the cache ie pass the hole */
+-		end_set = LAST_ICACHE_ADDR;
+-	}
+-	for (set = start_set; set <= end_set; set += (0x10 - 3))
+-		asm volatile("cpushl %%ic,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%ic,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%ic,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%ic,(%0)" : : "a" (set));
+-}
+-
+-
+-/********************************************************************
+- *  Disable the data cache completely
+- ********************************************************************/
+-void DcacheDisable(void)
+-{
+-	int newValue;
+-	unsigned long flags;
+-
+-	local_save_flags(flags);
+-	local_irq_disable();
+-
+-	DcacheFlushInvalidate();      /* begin by flushing the cache */
+-	newValue = CACHE_DISABLE_MODE; /* disable it */
+-	cacr_set(newValue);
+-	local_irq_restore(flags);
+-}
+-
+-/********************************************************************
+- *  Unconditionally enable the data cache
+- ********************************************************************/
+-void DcacheEnable(void)
+-{
+-	cacr_set(CACHE_INITIAL_MODE);
+-}
+-
+-
++/* Cache Control Reg shadow reg */
+ unsigned long shadow_cacr;
+ 
++/**
++ * cacr_set - Set the Cache Control Register
++ * @x Value to set
++ */
+ void cacr_set(unsigned long x)
+ {
+ 	shadow_cacr = x;
+@@ -209,6 +32,11 @@ void cacr_set(unsigned long x)
+ 			      : "r" (shadow_cacr));
+ }
+ 
++/**
++ * cacr_get - Get the current value of the Cache Control Register
++ *
++ * @return CACR value
++ */
+ unsigned long cacr_get(void)
+ {
+ 	return shadow_cacr;
+--- a/arch/m68k/coldfire/head.S
++++ b/arch/m68k/coldfire/head.S
+@@ -244,7 +244,7 @@ ENTRY(__start)
+ /* Setup initial stack pointer */
+ 	movel	#0x40001000,%sp	
+ 
+-/* Clear usp */
++/* Setup usp */
+ 	subl	%a0,%a0
+ 	movel	%a0,%usp
+ 
+@@ -252,6 +252,10 @@ ENTRY(__start)
+ 	movec   %d0, %rambar1
+ 	movew	#0x2700,%sr
+ 
++/* reset cache */
++	movel	#(CF_CACR_ICINVA + CF_CACR_DCINVA),%d0
++	movecl	%d0,%cacr
++
+ 	movel	#(MMU_BASE+1),%d0
+ 	movecl	%d0,%mmubar
+ 	movel	#MMUOR_CA,%a0  			/* Clear tlb entries */
+--- a/arch/m68k/coldfire/signal.c
++++ b/arch/m68k/coldfire/signal.c
+@@ -37,6 +37,7 @@
+ #include <asm/cf_pgtable.h>
+ #include <asm/traps.h>
+ #include <asm/ucontext.h>
++#include <asm/cacheflush.h>
+ 
+ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+ 
+@@ -605,10 +606,9 @@ static inline int rt_setup_ucontext(stru
+ 	return err;
+ }
+ 
+-extern void IcacheInvalidateCacheBlock(void *, unsigned long);
+ static inline void push_cache(unsigned long vaddr)
+ {
+-	IcacheInvalidateCacheBlock((void *)vaddr, 8);
++	cf_cache_push(__pa(vaddr), 8);
+ }
+ 
+ static inline void __user *
+--- a/arch/m68k/kernel/sys_m68k.c
++++ b/arch/m68k/kernel/sys_m68k.c
+@@ -29,6 +29,9 @@
+ #include <asm/traps.h>
+ #include <asm/page.h>
+ #include <asm/unistd.h>
++#ifdef CONFIG_COLDFIRE
++#include <asm/cacheflush.h>
++#endif
+ 
+ /*
+  * sys_pipe() is the normal C calling standard for creating
+@@ -257,6 +260,7 @@ asmlinkage int sys_ipc (uint call, int f
+ 	return -EINVAL;
+ }
+ 
++#ifndef CONFIG_COLDFIRE
+ /* Convert virtual (user) address VADDR to physical address PADDR */
+ #define virt_to_phys_040(vaddr)						\
+ ({									\
+@@ -580,6 +584,7 @@ cache_flush_060 (unsigned long addr, int
+     }
+   return 0;
+ }
++#endif /* CONFIG_COLDFIRE */
+ 
+ /* sys_cacheflush -- flush (part of) the processor cache.  */
+ asmlinkage int
+@@ -612,6 +617,7 @@ sys_cacheflush (unsigned long addr, int 
+ 			goto out;
+ 	}
+ 
++#ifndef CONFIG_COLDFIRE
+ 	if (CPU_IS_020_OR_030) {
+ 		if (scope == FLUSH_SCOPE_LINE && len < 256) {
+ 			unsigned long cacr;
+@@ -656,6 +662,16 @@ sys_cacheflush (unsigned long addr, int 
+ 		ret = cache_flush_060 (addr, scope, cache, len);
+ 	    }
+ 	}
++#else /* CONFIG_COLDFIRE */
++	if ((cache & FLUSH_CACHE_INSN) && (cache & FLUSH_CACHE_DATA))
++		flush_bcache();
++	else if (cache & FLUSH_CACHE_INSN)
++		flush_icache();
++	else
++		flush_dcache();
++
++	ret = 0;
++#endif /* CONFIG_COLDFIRE */
+ out:
+ 	unlock_kernel();
+ 	return ret;
+--- a/arch/m68k/mm/cache.c
++++ b/arch/m68k/mm/cache.c
+@@ -81,36 +81,7 @@ static unsigned long virt_to_phys_slow(u
+ void flush_icache_range(unsigned long address, unsigned long endaddr)
+ {
+ #ifdef CONFIG_COLDFIRE
+-	unsigned long set;
+-	unsigned long start_set;
+-	unsigned long end_set;
+-
+-	start_set = address & _ICACHE_SET_MASK;
+-	end_set = endaddr & _ICACHE_SET_MASK;
+-
+-	if (start_set > end_set) {
+-	/* from the begining to the lowest address */
+-		for (set = 0; set <= end_set; set += (0x10 - 3))
+-			asm volatile ("cpushl %%ic,(%0)\n"
+-				      "\taddq%.l #1,%0\n"
+-				      "\tcpushl %%ic,(%0)\n"
+-				      "\taddq%.l #1,%0\n"
+-				      "\tcpushl %%ic,(%0)\n"
+-				      "\taddq%.l #1,%0\n"
+-				      "\tcpushl %%ic,(%0)" : : "a" (set));
+-
+-		/* next loop will finish the cache ie pass the hole */
+-		end_set = LAST_ICACHE_ADDR;
+-	}
+-	for (set = start_set; set <= end_set; set += (0x10 - 3))
+-		asm volatile ("cpushl %%ic,(%0)\n"
+-			      "\taddq%.l #1,%0\n"
+-			      "\tcpushl %%ic,(%0)\n"
+-			      "\taddq%.l #1,%0\n"
+-			      "\tcpushl %%ic,(%0)\n"
+-			      "\taddq%.l #1,%0\n"
+-			      "\tcpushl %%ic,(%0)" : : "a" (set));
+-
++	cf_icache_flush_range(address, endaddr);
+ #else /* !CONFIG_COLDFIRE */
+ 
+ 	if (CPU_IS_040_OR_060) {
+--- a/arch/m68k/mm/memory.c
++++ b/arch/m68k/mm/memory.c
+@@ -127,6 +127,7 @@ int free_pointer_table (pmd_t *ptable)
+ 	return 0;
+ }
+ 
++#ifndef CONFIG_COLDFIRE
+ /* invalidate page in both caches */
+ static inline void clear040(unsigned long paddr)
+ {
+@@ -173,6 +174,7 @@ static inline void pushcl040(unsigned lo
+ 		clear040(paddr);
+ 	local_irq_restore(flags);
+ }
++#endif /* CONFIG_COLDFIRE */
+ 
+ /*
+  * 040: Hit every page containing an address in the range paddr..paddr+len-1.
+@@ -203,38 +205,10 @@ static inline void pushcl040(unsigned lo
+ 
+ void cache_clear (unsigned long paddr, int len)
+ {
+-    if (CPU_IS_CFV4E) {
+-	unsigned long set;
+-	unsigned long start_set;
+-	unsigned long end_set;
+-
+-	start_set = paddr & _ICACHE_SET_MASK;
+-	end_set = (paddr+len-1) & _ICACHE_SET_MASK;
+-
+-	if (start_set > end_set) {
+-		/* from the begining to the lowest address */
+-		for (set = 0; set <= end_set; set += (0x10 - 3))
+-			asm volatile("cpushl %%bc,(%0)\n"
+-				     "\taddq%.l #1,%0\n"
+-				     "\tcpushl %%bc,(%0)\n"
+-				     "\taddq%.l #1,%0\n"
+-				     "\tcpushl %%bc,(%0)\n"
+-				     "\taddq%.l #1,%0\n"
+-				     "\tcpushl %%bc,(%0)" : : "a" (set));
+-
+-		/* next loop will finish the cache ie pass the hole */
+-		end_set = LAST_ICACHE_ADDR;
+-	}
+-	for (set = start_set; set <= end_set; set += (0x10 - 3))
+-		asm volatile("cpushl %%bc,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%bc,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%bc,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%bc,(%0)" : : "a" (set));
+-
+-    } else if (CPU_IS_040_OR_060) {
++#ifdef CONFIG_COLDFIRE
++	cf_cache_clear(paddr, len);
++#else
++    if (CPU_IS_040_OR_060) {
+ 	int tmp;
+ 
+ 	/*
+@@ -268,6 +242,7 @@ void cache_clear (unsigned long paddr, i
+     if(mach_l2_flush)
+ 	mach_l2_flush(0);
+ #endif
++#endif /* CONFIG_COLDFIRE */
+ }
+ EXPORT_SYMBOL(cache_clear);
+ 
+@@ -281,38 +256,10 @@ EXPORT_SYMBOL(cache_clear);
+ 
+ void cache_push (unsigned long paddr, int len)
+ {
+-    if (CPU_IS_CFV4E) {
+-	unsigned long set;
+-	unsigned long start_set;
+-	unsigned long end_set;
+-
+-	start_set = paddr & _ICACHE_SET_MASK;
+-	end_set = (paddr+len-1) & _ICACHE_SET_MASK;
+-
+-	if (start_set > end_set) {
+-		/* from the begining to the lowest address */
+-		for (set = 0; set <= end_set; set += (0x10 - 3))
+-			asm volatile("cpushl %%bc,(%0)\n"
+-				     "\taddq%.l #1,%0\n"
+-				     "\tcpushl %%bc,(%0)\n"
+-				     "\taddq%.l #1,%0\n"
+-				     "\tcpushl %%bc,(%0)\n"
+-				     "\taddq%.l #1,%0\n"
+-				     "\tcpushl %%bc,(%0)" : : "a" (set));
+-
+-		/* next loop will finish the cache ie pass the hole */
+-		end_set = LAST_ICACHE_ADDR;
+-	}
+-	for (set = start_set; set <= end_set; set += (0x10 - 3))
+-		asm volatile("cpushl %%bc,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%bc,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%bc,(%0)\n"
+-			     "\taddq%.l #1,%0\n"
+-			     "\tcpushl %%bc,(%0)" : : "a" (set));
+-
+-    } else if (CPU_IS_040_OR_060) {
++#ifdef CONFIG_COLDFIRE
++	cf_cache_push(paddr, len);
++#else
++    if (CPU_IS_040_OR_060) {
+ 	int tmp = PAGE_SIZE;
+ 
+ 	/*
+@@ -352,6 +299,7 @@ void cache_push (unsigned long paddr, in
+     if(mach_l2_flush)
+ 	mach_l2_flush(1);
+ #endif
++#endif /* CONFIG_COLDFIRE */
+ }
+ EXPORT_SYMBOL(cache_push);
+ 
+--- a/include/asm-m68k/cf_cacheflush.h
++++ b/include/asm-m68k/cf_cacheflush.h
+@@ -1,160 +1,439 @@
++/*
++ * include/asm-m68k/cf_cacheflush.h - Coldfire Cache
++ *
++ * Based on include/asm-m68k/cacheflush.h
++ *
++ * Coldfire pieces by:
++ *   Kurt Mahan kmahan@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
+ #ifndef M68K_CF_CACHEFLUSH_H
+ #define M68K_CF_CACHEFLUSH_H
+ 
+ #include <asm/cfcache.h>
+ 
+ /*
+- * Cache handling functions
++ * Coldfire Cache Model
++ *
++ * The Coldfire processors use a Harvard architecture cache configured
++ * as four-way set associative.  The cache does not implement bus snooping
++ * so cache coherency with other masters must be maintained in software.
++ *
++ * The cache is managed via the CPUSHL instruction in conjunction with
++ * bits set in the CACR (cache control register).  Currently the code
++ * uses the CPUSHL enhancement which adds the ability to
++ * invalidate/clear/push a cacheline by physical address.  This feature
++ * is designated in the Hardware Configuration Register [D1-CPES].
++ *
++ * CACR Bits:
++ *	DPI[28]		cpushl invalidate disable for d-cache
++ *	IDPI[12]	cpushl invalidate disable for i-cache
++ *	SPA[14]		cpushl search by physical address
++ *	IVO[20]		cpushl invalidate only
++ *
++ * Random Terminology:
++ *  * invalidate = reset the cache line's valid bit
++ *  * push = generate a line-sized store of the data if its contents are marked
++ *	     as modifed (the modified flag is cleared after the store)
++ *  * clear = push + invalidate
+  */
+ 
+-#define flush_icache()						\
+-({								\
+-  unsigned long set;						\
+-  unsigned long start_set;					\
+-  unsigned long end_set;					\
+-								\
+-  start_set = 0;						\
+-  end_set = (unsigned long)LAST_DCACHE_ADDR;			\
+-								\
+-  for (set = start_set; set <= end_set; set += (0x10 - 3)) 	\
+-    asm volatile("cpushl %%ic,(%0)\n"				\
+-		 "\taddq%.l #1,%0\n"				\
+-		 "\tcpushl %%ic,(%0)\n"				\
+-		 "\taddq%.l #1,%0\n"				\
+-		 "\tcpushl %%ic,(%0)\n"				\
+-		 "\taddq%.l #1,%0\n"				\
+-		 "\tcpushl %%ic,(%0)" : : "a" (set));		\
+-})
++/**
++ * flush_icache - Flush all of the instruction cache
++ */
++static inline void flush_icache(void)
++{
++	asm volatile("nop\n"
++		     "moveq%.l	#0,%%d0\n"
++		     "moveq%.l	#0,%%d1\n"
++		     "move%.l	%%d0,%%a0\n"
++		     "1:\n"
++		     "cpushl	%%ic,(%%a0)\n"
++		     "add%.l	#0x0010,%%a0\n"
++		     "addq%.l	#1,%%d1\n"
++		     "cmpi%.l	%0,%%d1\n"
++		     "bne	1b\n"
++		     "moveq%.l	#0,%%d1\n"
++		     "addq%.l	#1,%%d0\n"
++		     "move%.l	%%d0,%%a0\n"
++		     "cmpi%.l	#4,%%d0\n"
++		     "bne	1b\n"
++		     : : "i" (CACHE_SETS)
++		     : "a0", "d0", "d1");
++}
+ 
+-/*
+- * invalidate the cache for the specified memory range.
+- * It starts at the physical address specified for
+- * the given number of bytes.
++/**
++ * flush_dcache - Flush all of the data cache
+  */
+-extern void cache_clear(unsigned long paddr, int len);
+-/*
+- * push any dirty cache in the specified memory range.
+- * It starts at the physical address specified for
+- * the given number of bytes.
++static inline void flush_dcache(void)
++{
++	asm volatile("nop\n"
++		     "moveq%.l	#0,%%d0\n"
++		     "moveq%.l	#0,%%d1\n"
++		     "move%.l	%%d0,%%a0\n"
++		     "1:\n"
++		     "cpushl	%%dc,(%%a0)\n"
++		     "add%.l	#0x0010,%%a0\n"
++		     "addq%.l	#1,%%d1\n"
++		     "cmpi%.l	%0,%%d1\n"
++		     "bne	1b\n"
++		     "moveq%.l	#0,%%d1\n"
++		     "addq%.l	#1,%%d0\n"
++		     "move%.l	%%d0,%%a0\n"
++		     "cmpi%.l	#4,%%d0\n"
++		     "bne	1b\n"
++		     : : "i" (CACHE_SETS)
++		     : "a0", "d0", "d1");
++}
++
++/**
++ * flush_bcache - Flush all of both caches
+  */
+-extern void cache_push(unsigned long paddr, int len);
++static inline void flush_bcache(void)
++{
++	asm volatile("nop\n"
++		     "moveq%.l	#0,%%d0\n"
++		     "moveq%.l	#0,%%d1\n"
++		     "move%.l	%%d0,%%a0\n"
++		     "1:\n"
++		     "cpushl	%%bc,(%%a0)\n"
++		     "add%.l	#0x0010,%%a0\n"
++		     "addq%.l	#1,%%d1\n"
++		     "cmpi%.l	%0,%%d1\n"
++		     "bne	1b\n"
++		     "moveq%.l	#0,%%d1\n"
++		     "addq%.l	#1,%%d0\n"
++		     "move%.l	%%d0,%%a0\n"
++		     "cmpi%.l	#4,%%d0\n"
++		     "bne	1b\n"
++		     : : "i" (CACHE_SETS)
++		     : "a0", "d0", "d1");
++}
+ 
+-/*
+- * push and invalidate pages in the specified user virtual
+- * memory range.
++/**
++ * cf_cache_clear - invalidate cache
++ * @paddr: starting physical address
++ * @len: number of bytes
++ *
++ * Invalidate cache lines starting at paddr for len bytes.
++ * Those lines are not pushed.
++ */
++static inline void cf_cache_clear(unsigned long paddr, int len)
++{
++	/* number of lines */
++	len =  (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
++
++	/* align on set boundary */
++	paddr &= 0xfffffff0;
++
++	asm volatile("nop\n"
++		     "move%.l   %2,%%d0\n"
++		     "or%.l	%3,%%d0\n"
++		     "movec	%%d0,%%cacr\n"
++		     "move%.l	%0,%%a0\n"
++		     "move%.l	%1,%%d0\n"
++		     "1:\n"
++		     "cpushl	%%bc,(%%a0)\n"
++		     "lea	0x10(%%a0),%%a0\n"
++		     "subq%.l	#1,%%d0\n"
++		     "bne%.b	1b\n"
++		     "movec	%2,%%cacr\n"
++		     : : "a" (paddr), "r" (len),
++			 "r" (shadow_cacr),
++			 "i" (CF_CACR_SPA+CF_CACR_IVO)
++		     : "a0", "d0");
++}
++
++/**
++ * cf_cache_push - Push dirty cache out with no invalidate
++ * @paddr: starting physical address
++ * @len: number of bytes
++ *
++ * Push the any dirty lines starting at paddr for len bytes.
++ * Those lines are not invalidated.
++ */
++static inline void cf_cache_push(unsigned long paddr, int len)
++{
++	/* number of lines */
++	len =  (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
++
++	/* align on set boundary */
++	paddr &= 0xfffffff0;
++
++	asm volatile("nop\n"
++		     "move%.l   %2,%%d0\n"
++		     "or%.l	%3,%%d0\n"
++		     "movec	%%d0,%%cacr\n"
++		     "move%.l	%0,%%a0\n"
++		     "move%.l	%1,%%d0\n"
++		     "1:\n"
++		     "cpushl	%%bc,(%%a0)\n"
++		     "lea	0x10(%%a0),%%a0\n"
++		     "subq%.l	#1,%%d0\n"
++		     "bne.b	1b\n"
++		     "movec	%2,%%cacr\n"
++		     : : "a" (paddr), "r" (len),
++			 "r" (shadow_cacr),
++			 "i" (CF_CACR_SPA+CF_CACR_DPI+CF_CACR_IDPI)
++		     : "a0", "d0");
++}
++
++/**
++ * cf_cache_flush - Push dirty cache out and invalidate
++ * @paddr: starting physical address
++ * @len: number of bytes
++ *
++ * Push the any dirty lines starting at paddr for len bytes and
++ * invalidate those lines.
++ */
++static inline void cf_cache_flush(unsigned long paddr, int len)
++{
++	/* number of lines */
++	len =  (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
++
++	/* align on set boundary */
++	paddr &= 0xfffffff0;
++
++	asm volatile("nop\n"
++		     "move%.l   %2,%%d0\n"
++		     "or%.l	%3,%%d0\n"
++		     "movec	%%d0,%%cacr\n"
++		     "move%.l	%0,%%a0\n"
++		     "move%.l	%1,%%d0\n"
++		     "1:\n"
++		     "cpushl	%%bc,(%%a0)\n"
++		     "lea	0x10(%%a0),%%a0\n"
++		     "subq%.l	#1,%%d0\n"
++		     "bne.b	1b\n"
++		     "movec	%2,%%cacr\n"
++		     : : "a" (paddr), "r" (len),
++			 "r" (shadow_cacr),
++			 "i" (CF_CACR_SPA)
++		     : "a0", "d0");
++}
++
++/**
++ * cf_cache_flush_range - Push dirty data/inst cache in range out and invalidate
++ * @vstart - starting virtual address
++ * @vend: ending virtual address
++ *
++ * Push the any dirty data/instr lines starting at paddr for len bytes and
++ * invalidate those lines.
++ */
++static inline void cf_cache_flush_range(unsigned long vstart, unsigned long vend)
++{
++	int len;
++
++	/* align on set boundary */
++	vstart &= 0xfffffff0;
++	vend = PAGE_ALIGN((vend + (CACHE_LINE_SIZE-1))) & 0xfffffff0;
++	len = vend - vstart;
++	vstart = __pa(vstart);
++	vend = vstart + len;
++
++	asm volatile("nop\n"
++		     "move%.l   %2,%%d0\n"
++		     "or%.l	%3,%%d0\n"
++		     "movec	%%d0,%%cacr\n"
++		     "move%.l	%0,%%a0\n"
++		     "move%.l	%1,%%a1\n"
++		     "1:\n"
++		     "cpushl	%%bc,(%%a0)\n"
++		     "lea	0x10(%%a0),%%a0\n"
++		     "cmpa%.l	%%a0,%%a1\n"
++		     "bne.b	1b\n"
++		     "movec	%2,%%cacr\n"
++		     : /* no return */
++		     : "a" (vstart), "a" (vend),
++		       "r" (shadow_cacr),
++		       "i" (CF_CACR_SPA)
++		     : "a0", "a1", "d0");
++}
++
++/**
++ * cf_dcache_flush_range - Push dirty data cache in range out and invalidate
++ * @vstart - starting virtual address
++ * @vend: ending virtual address
++ *
++ * Push the any dirty data lines starting at paddr for len bytes and
++ * invalidate those lines.
++ */
++static inline void cf_dcache_flush_range(unsigned long vstart, unsigned long vend)
++{
++	/* align on set boundary */
++	vstart &= 0xfffffff0;
++	vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
++
++	asm volatile("nop\n"
++		     "move%.l   %2,%%d0\n"
++		     "or%.l	%3,%%d0\n"
++		     "movec	%%d0,%%cacr\n"
++		     "move%.l	%0,%%a0\n"
++		     "move%.l	%1,%%a1\n"
++		     "1:\n"
++		     "cpushl	%%dc,(%%a0)\n"
++		     "lea	0x10(%%a0),%%a0\n"
++		     "cmpa%.l	%%a0,%%a1\n"
++		     "bne.b	1b\n"
++		     "movec	%2,%%cacr\n"
++		     : /* no return */
++		     : "a" (__pa(vstart)), "a" (__pa(vend)),
++		       "r" (shadow_cacr),
++		       "i" (CF_CACR_SPA)
++		     : "a0", "a1", "d0");
++}
++
++/**
++ * cf_icache_flush_range - Push dirty inst cache in range out and invalidate
++ * @vstart - starting virtual address
++ * @vend: ending virtual address
++ *
++ * Push the any dirty instr lines starting at paddr for len bytes and
++ * invalidate those lines.  This should just be an invalidate since you
++ * shouldn't be able to have dirty instruction cache.
+  */
+-extern void cache_push_v(unsigned long vaddr, int len);
++static inline void cf_icache_flush_range(unsigned long vstart, unsigned long vend)
++{
++	/* align on set boundary */
++	vstart &= 0xfffffff0;
++	vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
++
++	asm volatile("nop\n"
++		     "move%.l   %2,%%d0\n"
++		     "or%.l	%3,%%d0\n"
++		     "movec	%%d0,%%cacr\n"
++		     "move%.l	%0,%%a0\n"
++		     "move%.l	%1,%%a1\n"
++		     "1:\n"
++		     "cpushl	%%ic,(%%a0)\n"
++		     "lea	0x10(%%a0),%%a0\n"
++		     "cmpa%.l	%%a0,%%a1\n"
++		     "bne.b	1b\n"
++		     "movec	%2,%%cacr\n"
++		     : /* no return */
++		     : "a" (__pa(vstart)), "a" (__pa(vend)),
++		       "r" (shadow_cacr),
++		       "i" (CF_CACR_SPA)
++		     : "a0", "a1", "d0");
++}
+ 
+-/* This is needed whenever the virtual mapping of the current
+-   process changes.  */
++/**
++ * flush_cache_mm - Flush an mm_struct
++ * @mm: mm_struct to flush
++ */
++static inline void flush_cache_mm(struct mm_struct *mm)
++{
++	if (mm == current->mm)
++		flush_bcache();
++}
+ 
++#define flush_cache_dup_mm(mm)	flush_cache_mm(mm)
+ 
+-#define flush_cache_all()		do { } while (0)
+-#define flush_cache_mm(mm)		do { } while (0)
+-#define flush_cache_range(mm, a, b)	do { } while (0)
+-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+-
+-#define flush_dcache_range(paddr, len)	do { } while (0)
+-
+-/* Push the page at kernel virtual address and clear the icache */
+-/* use cpush %bc instead of cpush %dc, cinv %ic */
+-#define flush_page_to_ram(page) __flush_page_to_ram((void *) page_address(page))
+-extern inline void __flush_page_to_ram(void *address)
+-{
+-  unsigned long set;
+-  unsigned long start_set;
+-  unsigned long end_set;
+-  unsigned long addr = (unsigned long) address;
+-
+-  addr &= ~(PAGE_SIZE - 1); /* round down to page start address */
+-
+-  start_set = addr & _ICACHE_SET_MASK;
+-  end_set = (addr + PAGE_SIZE-1) & _ICACHE_SET_MASK;
+-
+-  if (start_set > end_set) {
+-    /* from the begining to the lowest address */
+-    for (set = 0; set <= end_set; set += (0x10 - 3))
+-      asm volatile("cpushl %%bc,(%0)\n"
+-		   "\taddq%.l #1,%0\n"
+-		   "\tcpushl %%bc,(%0)\n"
+-		   "\taddq%.l #1,%0\n"
+-		   "\tcpushl %%bc,(%0)\n"
+-		   "\taddq%.l #1,%0\n"
+-		   "\tcpushl %%bc,(%0)" : : "a" (set));
+-
+-    /* next loop will finish the cache ie pass the hole */
+-    end_set = LAST_ICACHE_ADDR;
+-  }
+-  for (set = start_set; set <= end_set; set += (0x10 - 3))
+-    asm volatile("cpushl %%bc,(%0)\n"
+-		 "\taddq%.l #1,%0\n"
+-		 "\tcpushl %%bc,(%0)\n"
+-		 "\taddq%.l #1,%0\n"
+-		 "\tcpushl %%bc,(%0)\n"
+-		 "\taddq%.l #1,%0\n"
+-		 "\tcpushl %%bc,(%0)" : : "a" (set));
+-}
+-
+-#define flush_dcache_page(page)			do { } while (0)
+-#define flush_icache_page(vma, pg)		do { } while (0)
+-#define flush_icache_user_range(adr, len)	do { } while (0)
+-/* NL */
+-#define flush_icache_user_page(vma, page, addr, len)	do { } while (0)
+-
+-/* Push n pages at kernel virtual address and clear the icache */
+-/* use cpush %bc instead of cpush %dc, cinv %ic */
+-extern inline void flush_icache_range(unsigned long address,
+-				      unsigned long endaddr)
+-{
+-  unsigned long set;
+-  unsigned long start_set;
+-  unsigned long end_set;
+-
+-  start_set = address & _ICACHE_SET_MASK;
+-  end_set = endaddr & _ICACHE_SET_MASK;
+-
+-  if (start_set > end_set) {
+-    /* from the begining to the lowest address */
+-    for (set = 0; set <= end_set; set += (0x10 - 3))
+-      asm volatile("cpushl %%ic,(%0)\n"
+-		   "\taddq%.l #1,%0\n"
+-		   "\tcpushl %%ic,(%0)\n"
+-		   "\taddq%.l #1,%0\n"
+-		   "\tcpushl %%ic,(%0)\n"
+-		   "\taddq%.l #1,%0\n"
+-		   "\tcpushl %%ic,(%0)" : : "a" (set));
+-
+-    /* next loop will finish the cache ie pass the hole */
+-    end_set = LAST_ICACHE_ADDR;
+-  }
+-  for (set = start_set; set <= end_set; set += (0x10 - 3))
+-    asm volatile("cpushl %%ic,(%0)\n"
+-		 "\taddq%.l #1,%0\n"
+-		 "\tcpushl %%ic,(%0)\n"
+-		 "\taddq%.l #1,%0\n"
+-		 "\tcpushl %%ic,(%0)\n"
+-		 "\taddq%.l #1,%0\n"
+-		 "\tcpushl %%ic,(%0)" : : "a" (set));
++/**
++ * flush_cache_range - Flush a cache range
++ * @vma: vma struct
++ * @start: Starting address
++ * @end: Ending address
++ *
++ * flush_cache_range must be a macro to avoid a dependency on
++ * linux/mm.h which includes this file.
++ */
++static inline void flush_cache_range(struct vm_area_struct *vma,
++	unsigned long start, unsigned long end)
++{
++	if (vma->vm_mm == current->mm)
++		cf_cache_flush_range(start, end);
+ }
+ 
++/**
++ * flush_cache_page - Flush a page of the cache
++ * @vma: vma struct
++ * @vmaddr:
++ * @pfn: page numer
++ *
++ * flush_cache_page must be a macro to avoid a dependency on
++ * linux/mm.h which includes this file.
++ */
++static inline void flush_cache_page(struct vm_area_struct *vma,
++	unsigned long vmaddr, unsigned long pfn)
++{
++	if (vma->vm_mm == current->mm)
++		cf_cache_flush_range(vmaddr, vmaddr+PAGE_SIZE);
++}
++
++/**
++ * __flush_page_to_ram - Push a page out of the cache
++ * @vaddr: Virtual address at start of page
++ *
++ * Push the page at kernel virtual address *vaddr* and clear
++ * the icache.
++ */
++static inline void __flush_page_to_ram(void *vaddr)
++{
++	asm volatile("nop\n"
++		     "move%.l   %2,%%d0\n"
++		     "or%.l	%3,%%d0\n"
++		     "movec	%%d0,%%cacr\n"
++		     "move%.l	%0,%%d0\n"
++		     "and%.l	#0xfffffff0,%%d0\n"
++		     "move%.l	%%d0,%%a0\n"
++		     "move%.l	%1,%%d0\n"
++		     "1:\n"
++		     "cpushl	%%bc,(%%a0)\n"
++		     "lea	0x10(%%a0),%%a0\n"
++		     "subq%.l	#1,%%d0\n"
++		     "bne.b	1b\n"
++		     "movec	%2,%%cacr\n"
++		     : : "a" (__pa(vaddr)), "i" (PAGE_SIZE / CACHE_LINE_SIZE),
++			 "r" (shadow_cacr), "i" (CF_CACR_SPA)
++		     : "a0", "d0");
++}
++
++/*
++ * Various defines for the kernel.
++ */
++
++extern void cache_clear(unsigned long paddr, int len);
++extern void cache_push(unsigned long paddr, int len);
++extern void flush_icache_range(unsigned long address, unsigned long endaddr);
++
++#define flush_cache_all()			flush_bcache()
++#define flush_cache_vmap(start, end)		flush_bcache()
++#define flush_cache_vunmap(start, end)		flush_bcache()
++
++#define flush_dcache_range(vstart, vend)	cf_dcache_flush_range(vstart, vend)
++#define flush_dcache_page(page)			__flush_page_to_ram(page_address(page))
++#define flush_dcache_mmap_lock(mapping)		do { } while (0)
++#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
++
++#define flush_icache_page(vma, page)		__flush_page_to_ram(page_address(page))
++
++/**
++ * copy_to_user_page - Copy memory to user page
++ */
+ static inline void copy_to_user_page(struct vm_area_struct *vma,
+ 				     struct page *page, unsigned long vaddr,
+ 				     void *dst, void *src, int len)
+ {
+ 	memcpy(dst, src, len);
+-	flush_icache_user_page(vma, page, vaddr, len);
++	cf_cache_flush(page_to_phys(page), PAGE_SIZE);
+ }
++
++/**
++ * copy_from_user_page - Copy memory from user page
++ */
+ static inline void copy_from_user_page(struct vm_area_struct *vma,
+ 				       struct page *page, unsigned long vaddr,
+ 				       void *dst, void *src, int len)
+ {
++	cf_cache_flush(page_to_phys(page), PAGE_SIZE);
+ 	memcpy(dst, src, len);
+ }
+ 
+-#define flush_cache_dup_mm(mm)			flush_cache_mm(mm)
+-#define flush_cache_vmap(start, end)		flush_cache_all()
+-#define flush_cache_vunmap(start, end)		flush_cache_all()
+-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+-
+ #endif /* M68K_CF_CACHEFLUSH_H */
+--- a/include/asm-m68k/cfcache.h
++++ b/include/asm-m68k/cfcache.h
+@@ -1,19 +1,32 @@
+ /*
+- * include/asm-m68k/cfcache.h
++ * include/asm-m68k/cfcache.h - Coldfire Cache Controller
++ *
++ * Kurt Mahan kmahan@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
+  */
+ #ifndef CF_CFCACHE_H
+ #define CF_CFCACHE_H
+ 
++/*
++ * CACR Cache Control Register
++ */
+ #define CF_CACR_DEC         (0x80000000) /* Data Cache Enable                */
+ #define CF_CACR_DW          (0x40000000) /* Data default Write-protect       */
+ #define CF_CACR_DESB        (0x20000000) /* Data Enable Store Buffer         */
+-#define CF_CACR_DDPI        (0x10000000) /* Data Disable CPUSHL Invalidate   */
++#define CF_CACR_DPI         (0x10000000) /* Data Disable CPUSHL Invalidate   */
+ #define CF_CACR_DHLCK       (0x08000000) /* 1/2 Data Cache Lock Mode         */
+ #define CF_CACR_DDCM_00     (0x00000000) /* Cacheable writethrough imprecise */
+ #define CF_CACR_DDCM_01     (0x02000000) /* Cacheable copyback               */
+ #define CF_CACR_DDCM_10     (0x04000000) /* Noncacheable precise             */
+ #define CF_CACR_DDCM_11     (0x06000000) /* Noncacheable imprecise           */
+ #define CF_CACR_DCINVA      (0x01000000) /* Data Cache Invalidate All        */
++#define CF_CACR_DDSP        (0x00800000) /* Data default supervisor-protect  */
+ #define CF_CACR_IVO         (0x00100000) /* Invalidate only                  */
+ #define CF_CACR_BEC         (0x00080000) /* Branch Cache Enable              */
+ #define CF_CACR_BCINVA      (0x00040000) /* Branch Cache Invalidate All      */
+@@ -24,61 +37,43 @@
+ #define CF_CACR_IHLCK       (0x00000800) /* 1/2 Instruction Cache Lock Mode  */
+ #define CF_CACR_IDCM        (0x00000400) /* Noncacheable Instr default mode  */
+ #define CF_CACR_ICINVA      (0x00000100) /* Instr Cache Invalidate All       */
++#define CF_CACR_IDSP	    (0x00000080) /* Ins default supervisor-protect   */
+ #define CF_CACR_EUSP        (0x00000020) /* Switch stacks in user mode       */
+ 
+-#define DCACHE_LINE_SIZE 0x0010     /* bytes per line        */
+-#define DCACHE_WAY_SIZE  0x2000     /* words per cache block */
+-#define CACHE_DISABLE_MODE (CF_CACR_DCINVA+CF_CACR_BCINVA+CF_CACR_ICINVA)
+-#ifdef CONFIG_M5445X_DISABLE_CACHE
+-/* disable cache for testing rev0 silicon */
+-#define CACHE_INITIAL_MODE (CF_CACR_EUSP)
+-#else
+-#define CACHE_INITIAL_MODE (CF_CACR_DEC+CF_CACR_BEC+CF_CACR_IEC+CF_CACR_EUSP)
+-#endif
+-
+-#define _DCACHE_SIZE (2*16384)
+-#define _ICACHE_SIZE (2*16384)
+-
+-#define _SET_SHIFT 4
+-
++#ifdef CONFIG_M54455
+ /*
+- * Masks for cache sizes.  Programming note: because the set size is a
+- * power of two, the mask is also the last address in the set.
+- * This may need to be #ifdef for other Coldfire processors.
++ * M5445x Cache Configuration
++ *	- cache line size is 16 bytes
++ *	- cache is 4-way set associative
++ *	- each cache has 256 sets (64k / 16bytes / 4way)
++ *	- I-Cache size is 16KB
++ *	- D-Cache size is 16KB
+  */
++#define ICACHE_SIZE 0x4000		/* instruction - 16k */
++#define DCACHE_SIZE 0x4000		/* data - 16k */
+ 
+-#define _DCACHE_SET_MASK ((_DCACHE_SIZE/64-1)<<_SET_SHIFT)
+-#define _ICACHE_SET_MASK ((_ICACHE_SIZE/64-1)<<_SET_SHIFT)
+-#define LAST_DCACHE_ADDR _DCACHE_SET_MASK
+-#define LAST_ICACHE_ADDR _ICACHE_SET_MASK
+-
++#define CACHE_LINE_SIZE 0x0010		/* 16 bytes */
++#define CACHE_SETS 0x0100		/* 256 sets */
++#define CACHE_WAYS 0x0004		/* 4 way */
++
++#define CACHE_DISABLE_MODE	(CF_CACR_DCINVA+	\
++				 CF_CACR_BCINVA+	\
++				 CF_CACR_ICINVA)
++
++#ifndef CONFIG_M5445X_DISABLE_CACHE
++#define CACHE_INITIAL_MODE 	(CF_CACR_DEC+		\
++				 CF_CACR_BEC+		\
++				 CF_CACR_IEC+		\
++				 CF_CACR_EUSP)
++#else
++/* cache disabled for testing */
++#define CACHE_INITIAL_MODE 	(CF_CACR_EUSP)
++#endif /* CONFIG_M5445X_DISABLE_CACHE */
++#endif /* CONFIG_M54455 */
+ 
+ #ifndef __ASSEMBLY__
+ 
+-extern void DcacheFlushInvalidate(void);
+-
+-extern void DcacheDisable(void);
+-extern void DcacheEnable(void);
+-
+-/******************************************************************************/
+-/*** Unimplemented Cache functionality                                      ***/
+-/******************************************************************************/
+-#define preDcacheInvalidateBlockMark()
+-#define postDcacheInvalidateBlockMark()
+-#define DcacheZeroBlock(p, l)           fast_bzero((char *)(p), (long)(l))
+-#define loadDcacheInvalidateBlock()     ASSERT(!"Not Implemented on V4e")
+-#define IcacheInvalidateBlock()         ASSERT(!"Not Implemented on V4e")
+-
+-/******************************************************************************/
+-/*** Redundant Cache functionality on ColdFire                              ***/
+-/******************************************************************************/
+-#define DcacheInvalidateBlock(p, l) DcacheFlushInvalidateCacheBlock(p, l)
+-#define DcacheFlushCacheBlock(p, l) DcacheFlushInvalidateCacheBlock(p, l)
+-#define DcacheFlushBlock(p, l)      DcacheFlushInvalidateCacheBlock(p, l)
+-
+-extern void DcacheFlushInvalidateCacheBlock(void *start, unsigned long size);
+-extern void FLASHDcacheFlushInvalidate(void);
+-
++extern unsigned long shadow_cacr;
+ extern void cacr_set(unsigned long x);
+ 
+ #endif /* !__ASSEMBLY__ */
diff --git a/target/linux/coldfire/patches/024-m5445x_enable_cache_store.patch b/target/linux/coldfire/patches/024-m5445x_enable_cache_store.patch
new file mode 100644
index 0000000000..e0b9c8033f
--- /dev/null
+++ b/target/linux/coldfire/patches/024-m5445x_enable_cache_store.patch
@@ -0,0 +1,40 @@
+From 96de11ad11db226423d364a75cc82c6118a18a1f Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 4 Dec 2007 00:04:21 -0700
+Subject: [PATCH] Enable Cache Store Buffer.
+
+LTIBName: m5445x-enable-cache-store
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/config.c |    2 ++
+ include/asm-m68k/cfcache.h  |    1 +
+ 2 files changed, 3 insertions(+), 0 deletions(-)
+
+--- a/arch/m68k/coldfire/config.c
++++ b/arch/m68k/coldfire/config.c
+@@ -21,6 +21,7 @@
+ #include <asm/machdep.h>
+ #include <asm/coldfire.h>
+ #include <asm/cfcache.h>
++#include <asm/cacheflush.h>
+ #include <asm/bootinfo.h>
+ #include <asm/io.h>
+ #include <asm/cfmmu.h>
+@@ -165,6 +166,7 @@ asmlinkage void __init cf_early_init(voi
+ 		+ sizeof(record->data[0]) + sizeof(record->data[1]);
+ 
+ 	/* Invalidate caches via CACR */
++	flush_bcache();
+ 	cacr_set(CACHE_DISABLE_MODE);
+ 
+ 	/* Turn on caches via CACR, enable EUSP */
+--- a/include/asm-m68k/cfcache.h
++++ b/include/asm-m68k/cfcache.h
+@@ -64,6 +64,7 @@
+ #define CACHE_INITIAL_MODE 	(CF_CACR_DEC+		\
+ 				 CF_CACR_BEC+		\
+ 				 CF_CACR_IEC+		\
++				 CF_CACR_DESB+		\
+ 				 CF_CACR_EUSP)
+ #else
+ /* cache disabled for testing */
diff --git a/target/linux/coldfire/patches/025-m5445x_usb_autosuspend_delay.patch b/target/linux/coldfire/patches/025-m5445x_usb_autosuspend_delay.patch
new file mode 100644
index 0000000000..39f4e6a38b
--- /dev/null
+++ b/target/linux/coldfire/patches/025-m5445x_usb_autosuspend_delay.patch
@@ -0,0 +1,22 @@
+From 2ff438b85bd3f34f31886883d9dacbd15bc16df8 Mon Sep 17 00:00:00 2001
+From: Bruce Schmid <duck@freescale.com>
+Date: Tue, 4 Dec 2007 11:30:14 -0700
+Subject: [PATCH] USB: restore usb_autosuspend_delay
+
+LTIBName: m5445x-usb-autosuspend-delay
+Signed-off-by: Duck <duck@freescale.com>
+---
+ drivers/usb/core/usb.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+--- a/drivers/usb/core/usb.c
++++ b/drivers/usb/core/usb.c
+@@ -52,7 +52,7 @@ static int nousb;	/* Disable USB when bu
+ struct workqueue_struct *ksuspend_usb_wq;
+ 
+ #ifdef	CONFIG_USB_SUSPEND
+-static int usb_autosuspend_delay = -1;		/* Default delay value,
++static int usb_autosuspend_delay = 2;		/* Default delay value,
+ 						 * in seconds */
+ module_param_named(autosuspend, usb_autosuspend_delay, int, 0644);
+ MODULE_PARM_DESC(autosuspend, "default autosuspend delay");
diff --git a/target/linux/coldfire/patches/026-m5445x_usb_cleanup_2.patch b/target/linux/coldfire/patches/026-m5445x_usb_cleanup_2.patch
new file mode 100644
index 0000000000..634e9dfc67
--- /dev/null
+++ b/target/linux/coldfire/patches/026-m5445x_usb_cleanup_2.patch
@@ -0,0 +1,470 @@
+From b014a8a0b66b1f0f55b3384f586f43e67e6dcc5d Mon Sep 17 00:00:00 2001
+From: Bruce Schmid <duck@freescale.com>
+Date: Tue, 4 Dec 2007 16:03:17 -0700
+Subject: [PATCH] USB: cleanup
+
+LTIBName: m5445x-usb-cleanup-2
+Signed-off-by: Duck <duck@freescale.com>
+---
+ drivers/usb/gadget/mcf5445x_udc.c |   14 ---
+ drivers/usb/host/ehci-arc.c       |   19 +---
+ drivers/usb/otg/fsl_otg.c         |  225 ++-----------------------------------
+ drivers/usb/otg/otg_fsm.h         |    2 +-
+ include/linux/usb/fsl_usb2.h      |    5 +-
+ 5 files changed, 15 insertions(+), 250 deletions(-)
+
+--- a/drivers/usb/gadget/mcf5445x_udc.c
++++ b/drivers/usb/gadget/mcf5445x_udc.c
+@@ -321,11 +321,6 @@ static void pullup_enable(struct fsl_udc
+ 	temp = fsl_readl(&dr_regs->usbcmd);
+ 	temp |= USB_CMD_RUN_STOP;
+ 	fsl_writel(temp, &dr_regs->usbcmd);
+-
+-#ifdef NEVER /* DDD FIXME: we want this? */
+-	if (!udc->transceiver)
+-		*((u16 *)(MCF_FBCS1_CSAR)) &= ~0x1; /* Enable pullup register */
+-#endif
+ }
+ 
+ static void pullup_disable(struct fsl_udc *udc)
+@@ -345,12 +340,6 @@ static void pullup_disable(struct fsl_ud
+ 	tmp = fsl_readl(&dr_regs->usbcmd);
+ 	tmp &= ~USB_CMD_RUN_STOP;
+ 	fsl_writel(tmp, &dr_regs->usbcmd);
+-
+-#ifdef NEVER /* DDD FIXME: we want this? */
+-	if (!udc->transceiver)
+-		*((u16 *)(MCF_FBCS1_CSAR)) |= 0x1; /* Disable pullup register */
+-#endif
+-
+ }
+ 
+ static void dr_controller_run(struct fsl_udc *udc)
+@@ -2598,9 +2587,6 @@ static int __init fsl_udc_probe(struct p
+ 		ret = -ENOMEM;
+ 		goto err4;
+ 	}
+-#if 0 // DDD why this? hoarks OTG host
+-	pullup_disable(udc);
+-#endif
+ 
+ 	create_proc_file();
+ 	return 0;
+--- a/drivers/usb/host/ehci-arc.c
++++ b/drivers/usb/host/ehci-arc.c
+@@ -378,25 +378,14 @@ static int ehci_fsl_drv_resume(struct pl
+ 
+ 	memcpy(ehci->regs, (void *)&usb_ehci_regs, sizeof(struct ehci_regs));
+ 
+-#if 0 // DDD test
+-	ehci_writel(ehci, usb_ehci_portsc, &ehci->regs->port_status[0]);
+-	printk("set portsc %08x  %08x\n", usb_ehci_portsc,
+-		ehci_readl(ehci,  &ehci->regs->port_status[0]));
+-	printk("set usbmode %08x\n", 
+-		ehci_readl(ehci,  &ehci->regs + FSL_SOC_USB_USBMODE));
+-
+ 	tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
+ 	ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
+-#else
+-	tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
+-	ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
+-	printk("tmp %08x  set usbmode %08x\n", tmp,
+-		ehci_readl(ehci,  hcd->regs + FSL_SOC_USB_USBMODE));
++	pr_debug("tmp %08x  set usbmode %08x\n", tmp,
++		 ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE));
+ 
+ 	ehci_writel(ehci, usb_ehci_portsc, &ehci->regs->port_status[0]);
+-	printk("set portsc %08x  %08x\n", usb_ehci_portsc,
+-		ehci_readl(ehci,  &ehci->regs->port_status[0]));
+-#endif
++	pr_debug("set portsc %08x  %08x\n", usb_ehci_portsc,
++		 ehci_readl(ehci, &ehci->regs->port_status[0]));
+ 
+ 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ 	hcd->state = HC_STATE_RUNNING;
+--- a/drivers/usb/otg/fsl_otg.c
++++ b/drivers/usb/otg/fsl_otg.c
+@@ -98,6 +98,7 @@ static struct fsl_otg_config fsl_otg_ini
+ 	.otg_port = 1,
+ };
+ 
++#if 0
+ static void dump_state(const char *string, struct otg_fsm *fsm)
+ {
+ 	printk(KERN_DEBUG "%s\n\tOTG state: %s\n", string,
+@@ -135,6 +136,7 @@ static void dump_state(const char *strin
+ 	printk(KERN_DEBUG "\tb_sess_vld: %d\n", fsm->b_sess_vld);
+ 	printk(KERN_DEBUG "\tid: %d\n", fsm->id);
+ }
++#endif
+ 
+ 
+ /* Routines to access transceiver ULPI registers */
+@@ -537,6 +539,7 @@ int fsl_otg_start_gadget(struct otg_fsm 
+ 	return 0;
+ }
+ 
++#if 0
+ static void fsl_otg_enable(struct otg_transceiver *otg_p)
+ {
+ 	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
+@@ -549,7 +552,7 @@ static void fsl_otg_enable(struct otg_tr
+ 	otg_sc |= OTGSC_INTERRUPT_ENABLE_BITS_MASK;
+ 	otg_sc &= ~OTGSC_IE_1ms_TIMER;
+ 	otg_sc &= ~OTGSC_CTRL_VBUS_DISCHARGE;
+-	otg_sc |= OTGSC_IE_USB_ID;	/* DDD added this */
++	otg_sc |= OTGSC_IE_USB_ID;
+ 	fsl_writel(otg_sc, &usb_dr_regs->otgsc);
+ 
+ 	fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
+@@ -570,6 +573,7 @@ static void fsl_otg_enable(struct otg_tr
+ 	fsm->a_sess_vld = (otg_sc & OTGSC_STS_A_SESSION_VALID) ? 1 : 0;
+ 	fsm->b_sess_end = (otg_sc & OTGSC_STS_B_SESSION_END) ? 1 : 0;
+ }
++#endif
+ 
+ /*
+  * Called by initialization code of host driver.  Register host controller
+@@ -577,34 +581,6 @@ static void fsl_otg_enable(struct otg_tr
+  */
+ static int fsl_otg_set_host(struct otg_transceiver *otg_p, struct usb_bus *host)
+ {
+-#if 0 // DDD beta-final
+-	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
+-	struct device *dev = host->controller;
+-
+-	if (!otg_p || otg_dev != fsl_otg_dev)
+-		return -ENODEV;
+-
+-	otg_p->host = host;
+-	otg_p->host->is_b_host = otg_dev->fsm.id;
+-
+-	otg_dev->fsm.a_bus_drop = 0;
+-	otg_dev->fsm.a_bus_req = 1;
+-
+-	otg_p->host->otg_port = fsl_otg_initdata.otg_port;
+-
+-	if (dev && dev->driver) {
+-		VDBG("suspending host\n");
+-		dev->driver->suspend(dev, PMSG_SUSPEND);
+-		otg_dev->host_working = 0;
+-		VDBG("back\n");
+-	}
+-
+-
+-	/* dump_state("set_host running statemachine", &otg_dev->fsm); DDD */
+-	otg_statemachine(&otg_dev->fsm);
+-
+-	return 0;
+-#else
+ 	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
+ 
+ 	if (!otg_p || otg_dev != fsl_otg_dev)
+@@ -644,7 +620,6 @@ static int fsl_otg_set_host(struct otg_t
+ 	otg_statemachine(&otg_dev->fsm);
+ 
+ 	return 0;
+-#endif
+ }
+ 
+ /* Called by initialization code of udc.  Register udc to OTG.*/
+@@ -673,12 +648,6 @@ static int fsl_otg_set_peripheral(struct
+ 
+ 	otg_dev->fsm.b_bus_req = 1;
+ 
+-#if 0 /* DDD uClinux */
+-	if (otg_p->host) {
+-		fsl_otg_enable(otg_p);
+-		otg_statemachine(&otg_dev->fsm);
+-	}
+-#endif
+ 	/* start the gadget right away if the ID pin says Mini-B */
+ 	DBG("ID pin=%d\n", otg_dev->fsm.id);
+ 	if (otg_dev->fsm.id == 1) {
+@@ -815,162 +784,6 @@ irqreturn_t fsl_otg_isr(int irq, void *d
+ }
+ 
+ 
+-#if 0 // DDD feta-final
+-irqreturn_t foo_fsl_otg_isr(int irq, void *dev_id)
+-{
+-	struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm;
+-	struct otg_transceiver *otg = &((struct fsl_otg *)dev_id)->otg;
+-	u32 otg_int_src, usb_int_src, otg_sc;
+-	int trigger = 0;
+-	int tmp;
+-
+-	usb_int_src = fsl_readl(&usb_dr_regs->usbsts);
+-	otg_sc = fsl_readl(&usb_dr_regs->otgsc);
+-	otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8);
+-
+-	/* Only clear otg interrupts */
+-	fsl_writel(otg_sc, &usb_dr_regs->otgsc);
+-
+-	/*FIXME: ID change not generate when init to 0 */
+-	/* process OTG interrupts */
+-	if (otg_int_src) {
+-		VDBG("\nOTG irq 0x%08x\n", otg_int_src);
+-		if (otg_int_src & OTGSC_INTSTS_1MS_TIMER)
+-			trigger = fsl_otg_tick_timer();
+-
+-		if (otg_int_src & OTGSC_INTSTS_USB_ID) {
+-			fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
+-			otg->default_a = (fsm->id == 0);
+-			if (otg->host)
+-				otg->host->is_b_host = fsm->id;
+-			if (otg->gadget)
+-				otg->gadget->is_a_peripheral = !fsm->id;
+-			VDBG("IRQ=ID now=%d\n", fsm->id);
+-
+-			if (fsm->id) {	/* switch to gadget */
+-				schedule_delayed_work(&((struct fsl_otg *)
+-							dev_id)->otg_event, 25);
+-			} else {	/* switch to host */
+-				cancel_delayed_work(&
+-						    ((struct fsl_otg *)dev_id)->
+-						    otg_event);
+-				fsl_otg_start_gadget(fsm, 0);
+-				fsl_otg_drv_vbus(1);
+-				fsl_otg_start_host(fsm, 1);
+-			}
+-
+-			return IRQ_HANDLED;
+-		}
+-		if (otg_int_src & OTGSC_INTSTS_DATA_PULSE) {
+-			fsm->a_srp_det = 1;
+-			trigger = 1;
+-			VDBG("!!!!Data pulse int\n");
+-		}
+-		if (otg_int_src & OTGSC_INTSTS_A_SESSION_VALID) {
+-			fsm->a_sess_vld =
+-			    (otg_sc & OTGSC_STS_A_SESSION_VALID) ? 1 : 0;
+-			/* detect VBUS pulsing */
+-			if ((fsm->transceiver->state == OTG_STATE_A_IDLE)
+-			    && fsm->a_sess_vld)
+-				fsm->a_srp_det = 1;
+-			trigger = 1;
+-			VDBG("!!!a_sess_vld int state=%d\n", fsm->a_sess_vld);
+-		}
+-		if (otg_int_src & OTGSC_INTSTS_A_VBUS_VALID) {
+-			fsm->a_vbus_vld = !!(otg_sc & OTGSC_STS_A_VBUS_VALID);
+-			trigger = 1;
+-			VDBG("!!!a_vbus_vld int state=%d\n", fsm->a_vbus_vld);
+-
+-#if 1
+-		if ((fsm->a_vbus_vld == 0) && (fsm->id == 0)) {
+-			if (fsm->transceiver->state != OTG_STATE_A_WAIT_VFALL)
+-				/* Warning insted of transfer to Error state. */
+-				printk(KERN_WARNING "ulpi: The USB Device is "
+-				       "sinking too much current!!\n");
+-			fsm->a_vbus_vld = 1;
+-		}
+-#endif
+-
+-
+-		}
+-		if (otg_int_src & OTGSC_INTSTS_B_SESSION_VALID) {
+-			fsm->b_sess_vld =
+-			    (otg_sc & OTGSC_STS_B_SESSION_VALID) ? 1 : 0;
+-			trigger = 1;
+-			/* SRP done */
+-			if ((fsl_otg_dev->otg.state == OTG_STATE_B_SRP_INIT) &&
+-			    fsm->b_sess_vld && srp_wait_done)
+-				fsm->b_srp_done = 1;
+-			VDBG("!!!!b_sess_vld int state=%d\n", fsm->b_sess_vld);
+-		}
+-		if (otg_int_src & OTGSC_INTSTS_B_SESSION_END) {
+-			fsm->b_sess_end =
+-			    (otg_sc & OTGSC_STS_B_SESSION_END) ? 1 : 0;
+-			trigger = 1;
+-			VDBG("!!!!b_sess_end int state=%d\n", fsm->b_sess_end);
+-		}
+-	}
+-
+-	/* process USB interrupts */
+-	if ((usb_int_src & USB_STS_PORT_CHANGE)
+-	    && (fsm->protocol == PROTO_HOST)) {
+-		VDBG("\nUSB irq A 0x%08x\n", usb_int_src);
+-		/* Device resume do not generate statemachine change */
+-		if (fsl_readl(&usb_dr_regs->portsc1) &
+-		    PORTSCX_PORT_FORCE_RESUME) {
+-			if (otg->default_a) {
+-				fsm->b_bus_resume = 1;
+-				trigger = 1;
+-			} else {
+-				fsm->a_bus_resume = 1;
+-				trigger = 1;
+-			}
+-		}
+-
+-		tmp = (fsl_readl(&usb_dr_regs->portsc1) &
+-		       PORTSCX_CURRENT_CONNECT_STATUS) ? 1 : 0;
+-		if (otg->default_a && (fsm->b_conn != tmp)) {
+-			fsm->b_conn = tmp;
+-			trigger = 1;
+-		} else if (!otg->default_a && (fsm->a_conn != tmp)) {
+-			fsm->a_conn = tmp;
+-			trigger = 1;
+-		}
+-	}
+-	/* Workaround: sometimes CSC bit will lost.  We change to
+-	 * polling CCS bit for connect change */
+-	if (fsm->protocol == PROTO_GADGET) {
+-		if (usb_int_src & USB_STS_SUSPEND) {
+-			VDBG("\nUSB irq B 0x%08x\n", usb_int_src);
+-			VDBG("peripheral detected suspend\n");
+-			if (otg->default_a)
+-				/* A-device detects B suspend */
+-				fsm->b_bus_suspend = 1;
+-			else
+-				/* B-device detects A suspend */
+-				fsm->a_bus_suspend = 1;
+-			trigger = 1;
+-		} else if (usb_int_src & USB_STS_PORT_CHANGE) {
+-			VDBG("\nUSB irq C 0x%08x\n", usb_int_src);
+-			VDBG("peripheral resumed\n");
+-			if (otg->default_a)
+-				fsm->b_bus_suspend = 0;
+-			else
+-				fsm->a_bus_suspend = 0;
+-			trigger = 1;
+-		}
+-	}
+-
+-	/* Invoke statemachine until state is stable */
+-	while (trigger) {
+-		trigger = otg_statemachine(fsm);
+-	}
+-
+-	return IRQ_HANDLED;
+-}
+-#endif
+-
+-
+ static struct otg_fsm_ops fsl_otg_ops = {
+ 	.chrg_vbus = fsl_otg_chrg_vbus,
+ 	.drv_vbus = fsl_otg_drv_vbus,
+@@ -1003,7 +816,6 @@ int fsl_otg_cfg(struct platform_device *
+ 	if (!fsl_otg_tc)
+ 		return -ENODEV;
+ 
+-#if 1 // DDD
+ 	if (pdata->regs) {
+ 		fsl_otg_tc->dr_mem_map = pdata->regs;
+ 	} else {
+@@ -1013,8 +825,10 @@ int fsl_otg_cfg(struct platform_device *
+ 			return -ENODEV;
+ 		}
+ 
++		/*
+ 		printk("DDD %s(): rsrc_start=0x%x  rsrc_len=0x%x\n",
+ 		     __FUNCTION__, res->start, res->end - res->start + 1);
++		*/
+ 
+ 		if (!request_mem_region(res->start, res->end - res->start + 1,
+ 					"OTG")) {
+@@ -1026,7 +840,6 @@ int fsl_otg_cfg(struct platform_device *
+ 	}
+ 	DBG("set dr_mem_map to 0x%p\n", fsl_otg_tc->dr_mem_map);
+ 
+-#endif 
+ 	INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event);
+ 
+ 	INIT_LIST_HEAD(&active_timers);
+@@ -1035,12 +848,11 @@ int fsl_otg_cfg(struct platform_device *
+ 	/* Set OTG state machine operations */
+ 	fsl_otg_tc->fsm.ops = &fsl_otg_ops;
+ 
+-#if 1 /* DDD */
+ 	/* record initial state of ID pin */
+ 	fsl_otg_tc->fsm.id = (fsl_otg_tc->dr_mem_map->otgsc & OTGSC_STS_USB_ID)
+ 	    ? 1 : 0;
+ 	DBG("initial ID pin=%d\n", fsl_otg_tc->fsm.id);
+-#endif
++
+ 	/* initialize the otg structure */
+ 	fsl_otg_tc->otg.label = DRIVER_DESC;
+ 	fsl_otg_tc->otg.set_host = fsl_otg_set_host;
+@@ -1115,13 +927,8 @@ int usb_otg_start(struct platform_device
+ 			__FUNCTION__, timeout);
+ 
+ 	/* configure the VBUSHS as IDLE(both host and device) */
+-#if 0
+-	/* DDD really have to check into setting the following */
+-	fsl_writel(USB_MODE_STREAM_DISABLE, &usb_dr_regs->usbmode);
+-#else
+ 	temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USBMODE_ES : 0);
+ 	fsl_writel(temp, &usb_dr_regs->usbmode);
+-#endif
+ 
+ 	/* configure PHY interface */
+ 	temp = fsl_readl(&usb_dr_regs->portsc1);
+@@ -1135,24 +942,11 @@ int usb_otg_start(struct platform_device
+ 	/* disable all interrupt and clear all OTGSC status */
+ 	temp = fsl_readl(&usb_dr_regs->otgsc);
+ 	temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK;
+-#if 0 // DDD
+-	/* DDD only want ID int
+-	 * temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE;
+-	 */
+-	temp |= OTGSC_IE_USB_ID;	/* DDD added this */
+-	temp &= ~OTGSC_IE_1ms_TIMER;	/* DDD added this */
+-#else
+ 	temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE;
+-#endif
+ 	fsl_writel(temp, &usb_dr_regs->otgsc);
+ 
+ 	fsl_otg_drv_vbus(0);
+ 
+-#if 0 // DDD beta-final
+-	temp = fsl_readl(&usb_dr_regs->otgsc);
+-	temp |= OTGSC_IE_A_SESSION_VALID;
+-	fsl_writel(temp, &usb_dr_regs->otgsc);
+-#else
+ 	/*
+ 	 * The identification (id) input is FALSE when a Mini-A plug is inserted
+ 	 * in the devices Mini-AB receptacle. Otherwise, this input is TRUE.
+@@ -1173,7 +967,6 @@ int usb_otg_start(struct platform_device
+ 	temp |= OTGSC_IE_USB_ID;
+ 	temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_IE_1ms_TIMER);
+ 	fsl_writel(temp, &usb_dr_regs->otgsc);
+-#endif
+ 
+ 	return 0;
+ }
+@@ -1427,10 +1220,8 @@ static int __init fsl_otg_probe(struct p
+ 		return -ENOMEM;
+ 
+ 	pdata = pdev->dev.platform_data;
+-#if 1 // DDD do this elsewhere
+ 	/* Initialize the clock, multiplexing pin and PHY interface */
+ 	board_init(pdev);
+-#endif
+ 
+ 	/* configure the OTG */
+ 	status = fsl_otg_cfg(pdev);
+--- a/drivers/usb/otg/otg_fsm.h
++++ b/drivers/usb/otg/otg_fsm.h
+@@ -18,7 +18,7 @@
+ #ifndef OTG_FSM_H
+ #define OTG_FSM_H
+ 
+-#if 1
++#if 0
+ #define DEBUG 	1
+ #define VERBOSE 	1
+ #endif
+--- a/include/linux/usb/fsl_usb2.h
++++ b/include/linux/usb/fsl_usb2.h
+@@ -104,9 +104,8 @@ struct fsl_usb_host_regs {
+ #if 0
+ 	u32 endptctrl[USB_MAX_ENDPOINTS]; /* Endpoint Control Registers */
+ #else
+-	// DDD: do these exits in the host register set??
+-	// DDD see DCCPARAMS:DEN for the real number of device endpoints
+-	// DDD 16 is the max
++	/* DDD see DCCPARAMS:DEN for the real number of device endpoints */
++	/* DDD 16 is the max */
+ 	u32 endptctrl[16];	/* Endpoint Control Registers */
+ #endif
+ };
diff --git a/target/linux/coldfire/patches/027-m5445x_usb_sdram_priority.patch b/target/linux/coldfire/patches/027-m5445x_usb_sdram_priority.patch
new file mode 100644
index 0000000000..e75f092a3d
--- /dev/null
+++ b/target/linux/coldfire/patches/027-m5445x_usb_sdram_priority.patch
@@ -0,0 +1,130 @@
+From b6b6d18a54e22784cb48e1953201484830d030e4 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 6 Dec 2007 14:17:46 -0700
+Subject: [PATCH] Change USB to SDRAM priority.
+
+Increase the USB priority to the maximum, above ColdfireCore,
+in the SDRAM crossbar switch.  This fixes the issues with the
+USB core not being able to transfer to memory fast enough to
+keep up with HS.
+
+LTIBName: m5445x-usb-sdram-priority
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/config.c     |   12 ++++++
+ include/asm-m68k/mcf5445x_xbs.h |   81 +++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 93 insertions(+), 0 deletions(-)
+ create mode 100644 include/asm-m68k/mcf5445x_xbs.h
+
+--- a/arch/m68k/coldfire/config.c
++++ b/arch/m68k/coldfire/config.c
+@@ -36,6 +36,7 @@
+ #include <asm/mcf5445x_sdramc.h>
+ #include <asm/mcf5445x_fbcs.h>
+ #include <asm/mcf5445x_dtim.h>
++#include <asm/mcf5445x_xbs.h>
+ 
+ /* JKM -- testing */
+ #include <linux/pfn.h>
+@@ -131,6 +132,17 @@ asmlinkage void __init cf_early_init(voi
+ 	MCF_SDRAMC_SDCS(1) = (256*1024*1024) | 0x1B;
+ #endif
+ 
++	/* Setup SDRAM crossbar(XBS) priorities */
++printk(KERN_INFO "Bumping USB Priority\n");
++	MCF_XBS_PRS2 = (MCF_XBS_PRS_M0(MCF_XBS_PRI_2) |
++			MCF_XBS_PRS_M1(MCF_XBS_PRI_3) |
++			MCF_XBS_PRS_M2(MCF_XBS_PRI_4) |
++			MCF_XBS_PRS_M3(MCF_XBS_PRI_5) |
++			MCF_XBS_PRS_M5(MCF_XBS_PRI_6) |
++			MCF_XBS_PRS_M6(MCF_XBS_PRI_1) |
++			MCF_XBS_PRS_M7(MCF_XBS_PRI_7));
++	
++
+ 	m68k_machtype = MACH_CFMMU;
+ 	m68k_fputype = FPU_CFV4E;
+ 	m68k_mmutype = MMU_CFV4E;
+--- /dev/null
++++ b/include/asm-m68k/mcf5445x_xbs.h
+@@ -0,0 +1,81 @@
++/*
++ * Kurt Mahan kmahan@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __MCF5445X_XBS_H__
++#define __MCF5445X_XBS_H__
++
++/*
++ * Crossbar Switch (XBS)
++ */
++
++/* Register read/write macros */
++#define MCF_XBS_PRS1		MCF_REG32(0xFC004100) /* Flexbus Priority */
++#define MCF_XBS_CRS1		MCF_REG32(0xFC004110) /* Flexbus Control */
++#define MCF_XBS_PRS2		MCF_REG32(0xFC004200) /* SDRam Priority */
++#define MCF_XBS_CRS2		MCF_REG32(0xFC004210) /* SDRam Control */
++#define MCF_XBS_PRS3		MCF_REG32(0xFC004300) /* ATA Priority */
++#define MCF_XBS_CRS3		MCF_REG32(0xFC004310) /* ATA Control */
++#define MCF_XBS_PRS4		MCF_REG32(0xFC004400) /* SRAM Priority */
++#define MCF_XBS_CRS4		MCF_REG32(0xFC004410) /* SRAM Control */
++#define MCF_XBS_PRS5		MCF_REG32(0xFC004500) /* PCI Priority */
++#define MCF_XBS_CRS5		MCF_REG32(0xFC004510) /* PCI Control */
++#define MCF_XBS_PRS6		MCF_REG32(0xFC004600) /* Slave6 Priority */
++#define MCF_XBS_CRS6		MCF_REG32(0xFC004610) /* Slave6 Control */
++#define MCF_XBS_PRS7		MCF_REG32(0xFC004700) /* Other Priority */
++#define MCF_XBS_CRS7		MCF_REG32(0xFC004710) /* Other Control */
++
++/* Priorities */
++#define MCF_XBS_PRI_1		0	/* Level 1 (highest) */
++#define MCF_XBS_PRI_2		1	/* Level 2 */
++#define MCF_XBS_PRI_3		2	/* Level 3 */
++#define MCF_XBS_PRI_4		3	/* Level 4 */
++#define MCF_XBS_PRI_5		4	/* Level 5 */
++#define MCF_XBS_PRI_6		5	/* Level 6 */
++#define MCF_XBS_PRI_7		6	/* Level 7 (lowest) */
++#define MCF_XBS_PRI_MASK	7	/* Mask (Not a valid level) */
++
++/* Priority Register (PRSn) Defs */
++#define	MCF_XBS_PRS_MACRO(m,p)	((p)<<((m)<<2))
++#define	MCF_XBS_PRS_M0(p)	MCF_XBS_PRS_MACRO(0, p)	/* Coldfire Core */
++#define	MCF_XBS_PRS_M1(p)	MCF_XBS_PRS_MACRO(1, p) /* eDMA */
++#define	MCF_XBS_PRS_M2(p)	MCF_XBS_PRS_MACRO(2, p) /* FEC0 */
++#define	MCF_XBS_PRS_M3(p)	MCF_XBS_PRS_MACRO(3, p) /* FEC1 */
++#define	MCF_XBS_PRS_M4(p)	MCF_XBS_PRS_MACRO(4, p) /* Master 4 */
++#define	MCF_XBS_PRS_M5(p)	MCF_XBS_PRS_MACRO(5, p) /* PCI */
++#define	MCF_XBS_PRS_M6(p)	MCF_XBS_PRS_MACRO(6, p) /* USB OTG */
++#define	MCF_XBS_PRS_M7(p)	MCF_XBS_PRS_MACRO(7, p) /* Serial Boot */
++
++/* Control Register (CRSn) Defs */
++#define MCF_XBS_CRS_RO		0x80000000	/* Read Only */
++#define	MCF_XBS_CRS_ARB		0x00000100	/* Arbitration Mode */
++#define	MCF_XBS_CRS_PCTL	0x00000030	/* Parking Control */
++#define	MCF_XBS_CRS_PARK	0x00000007	/* Park Location */
++
++/* MCF_XBS_CRS_ARB Defs */
++#define MCF_ABS_CRS_ARB_FIXED	0x00000000	/* Fixed priority */
++#define MCF_ABS_CRS_ARB_ROUND	0x00000100	/* Round Robin priority */
++
++/* MCF_XBS_CRS_PCTL Defs */
++#define MCF_ABS_CRS_PCTL_PARK	0x00000000	/* Park on the defined PARK */
++#define MCF_ABS_CRS_PCTL_LAST 	0x00000010	/* Park on the last master */
++#define MCF_ABS_CRS_PCTL_NONE 	0x00000020	/* Don't park */
++
++/* MCF_XBS_CRS_PARK Defs */
++#define MCF_ABS_CRS_PARK_M0	0x00000000	/* Park on Coldfire Core */
++#define MCF_ABS_CRS_PARK_M1	0x00000001	/* Park on eDMA */
++#define MCF_ABS_CRS_PARK_M2	0x00000002	/* Park on FEC0 */
++#define MCF_ABS_CRS_PARK_M3	0x00000003	/* Park on FEC1 */
++#define MCF_ABS_CRS_PARK_M4	0x00000004	/* Park on Reserved */
++#define MCF_ABS_CRS_PARK_M5	0x00000005	/* Park on PCI */
++#define MCF_ABS_CRS_PARK_M6	0x00000006	/* Park on USB OTG */
++#define MCF_ABS_CRS_PARK_M7	0x00000007	/* Park on Serial Boot */
++
++#endif /* __MCF5445X_XBS_H__ */
diff --git a/target/linux/coldfire/patches/028-mcfv4e_cache_ck_0_len.patch b/target/linux/coldfire/patches/028-mcfv4e_cache_ck_0_len.patch
new file mode 100644
index 0000000000..a160f5600a
--- /dev/null
+++ b/target/linux/coldfire/patches/028-mcfv4e_cache_ck_0_len.patch
@@ -0,0 +1,55 @@
+From 679a5be6f06b909adccc9c588feb26bf6d6df402 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 6 Dec 2007 16:40:39 -0700
+Subject: [PATCH] Add zero length checking to cache routines.
+
+LTIBName: mcfv4e-cache-ck-0-len
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ include/asm-m68k/cf_cacheflush.h |   14 +++++++++++---
+ 1 files changed, 11 insertions(+), 3 deletions(-)
+
+--- a/include/asm-m68k/cf_cacheflush.h
++++ b/include/asm-m68k/cf_cacheflush.h
+@@ -127,7 +127,9 @@ static inline void flush_bcache(void)
+ static inline void cf_cache_clear(unsigned long paddr, int len)
+ {
+ 	/* number of lines */
+-	len =  (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
++	len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
++	if (len == 0)
++		return;
+ 
+ 	/* align on set boundary */
+ 	paddr &= 0xfffffff0;
+@@ -161,7 +163,9 @@ static inline void cf_cache_clear(unsign
+ static inline void cf_cache_push(unsigned long paddr, int len)
+ {
+ 	/* number of lines */
+-	len =  (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
++	len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
++	if (len == 0)
++		return;
+ 
+ 	/* align on set boundary */
+ 	paddr &= 0xfffffff0;
+@@ -195,7 +199,9 @@ static inline void cf_cache_push(unsigne
+ static inline void cf_cache_flush(unsigned long paddr, int len)
+ {
+ 	/* number of lines */
+-	len =  (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
++	len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
++	if (len == 0)
++		return;
+ 
+ 	/* align on set boundary */
+ 	paddr &= 0xfffffff0;
+@@ -234,6 +240,8 @@ static inline void cf_cache_flush_range(
+ 	vstart &= 0xfffffff0;
+ 	vend = PAGE_ALIGN((vend + (CACHE_LINE_SIZE-1))) & 0xfffffff0;
+ 	len = vend - vstart;
++	if (len == 0)
++		return;
+ 	vstart = __pa(vstart);
+ 	vend = vstart + len;
+ 
diff --git a/target/linux/coldfire/patches/029-m5445x_usb_disable_debug.patch b/target/linux/coldfire/patches/029-m5445x_usb_disable_debug.patch
new file mode 100644
index 0000000000..fa74786527
--- /dev/null
+++ b/target/linux/coldfire/patches/029-m5445x_usb_disable_debug.patch
@@ -0,0 +1,22 @@
+From d6cd1bb1f60f790f8a5d410cfe40bfb344dde09b Mon Sep 17 00:00:00 2001
+From: Bruce Schmid <duck@freescale.com>
+Date: Thu, 6 Dec 2007 17:22:23 -0700
+Subject: [PATCH] USB: gadget: turn off DEBUG
+
+LTIBName: m5445x-usb-disable-debug
+Signed-off-by: Duck <duck@freescale.com>
+---
+ drivers/usb/gadget/mcf5445x_udc.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+--- a/drivers/usb/gadget/mcf5445x_udc.c
++++ b/drivers/usb/gadget/mcf5445x_udc.c
+@@ -34,7 +34,7 @@
+  *
+  */
+ 
+-#define DEBUG
++#undef DEBUG
+ #undef VERBOSE
+ 
+ #include <linux/module.h>
diff --git a/target/linux/coldfire/patches/030-m5445x_usb_add_dualspeed.patch b/target/linux/coldfire/patches/030-m5445x_usb_add_dualspeed.patch
new file mode 100644
index 0000000000..d2ffa69ad7
--- /dev/null
+++ b/target/linux/coldfire/patches/030-m5445x_usb_add_dualspeed.patch
@@ -0,0 +1,21 @@
+From 5fb2a68befbec97dba2264b2834487c72f47095d Mon Sep 17 00:00:00 2001
+From: Bruce Schmid <duck@freescale.com>
+Date: Wed, 5 Dec 2007 14:43:19 -0700
+Subject: [PATCH] USB: add is_dualspeed.
+
+LTIBName: m5445x-usb-add-dualspeed
+Signed-off-by: Duck <duck@freescale.com>
+---
+ drivers/usb/gadget/mcf5445x_udc.c |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+--- a/drivers/usb/gadget/mcf5445x_udc.c
++++ b/drivers/usb/gadget/mcf5445x_udc.c
+@@ -2538,6 +2538,7 @@ static int __init fsl_udc_probe(struct p
+ 	 * set the fsl_udc->gadget.xxx
+ 	 */
+ 	udc->gadget.ops = &fsl_gadget_ops;
++	udc->gadget.is_dualspeed = 1;
+ 
+ 	/* gadget.ep0 is a pointer */
+ 	udc->gadget.ep0 = &udc->eps[0].ep;
diff --git a/target/linux/coldfire/patches/031-m5445x_usb_defconfig.patch b/target/linux/coldfire/patches/031-m5445x_usb_defconfig.patch
new file mode 100644
index 0000000000..e39f03f735
--- /dev/null
+++ b/target/linux/coldfire/patches/031-m5445x_usb_defconfig.patch
@@ -0,0 +1,273 @@
+From 023b850e67316fbf595bf0cda13f02fabca1f29d Mon Sep 17 00:00:00 2001
+From: Bruce Schmid <duck@freescale.com>
+Date: Fri, 7 Dec 2007 10:30:46 -0700
+Subject: [PATCH] USB: add default USB settings
+
+LTIBName: m5445x-usb-defconfig
+Signed-off-by: Duck <duck@freescale.com>
+---
+ arch/m68k/configs/m54455evb_defconfig |  175 +++++++++++++++++++++++++++++++--
+ 1 files changed, 165 insertions(+), 10 deletions(-)
+
+--- a/arch/m68k/configs/m54455evb_defconfig
++++ b/arch/m68k/configs/m54455evb_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+ # Linux kernel version: 2.6.23
+-# Tue Nov 27 23:42:38 2007
++# Thu Dec  6 12:14:18 2007
+ #
+ CONFIG_M68K=y
+ CONFIG_MMU=y
+@@ -347,6 +347,7 @@ CONFIG_BLK_DEV=y
+ CONFIG_BLK_DEV_LOOP=y
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+ # CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
+ CONFIG_BLK_DEV_RAM=y
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=64000
+@@ -361,7 +362,7 @@ CONFIG_MISC_DEVICES=y
+ # SCSI device support
+ #
+ # CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=m
++CONFIG_SCSI=y
+ CONFIG_SCSI_DMA=y
+ # CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+@@ -370,7 +371,7 @@ CONFIG_SCSI_PROC_FS=y
+ #
+ # SCSI support type (disk, tape, CD-ROM)
+ #
+-CONFIG_BLK_DEV_SD=m
++CONFIG_BLK_DEV_SD=y
+ # CONFIG_CHR_DEV_ST is not set
+ # CONFIG_CHR_DEV_OSST is not set
+ # CONFIG_BLK_DEV_SR is not set
+@@ -380,7 +381,7 @@ CONFIG_BLK_DEV_SD=m
+ #
+ # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+ #
+-# CONFIG_SCSI_MULTI_LUN is not set
++CONFIG_SCSI_MULTI_LUN=y
+ # CONFIG_SCSI_CONSTANTS is not set
+ # CONFIG_SCSI_LOGGING is not set
+ # CONFIG_SCSI_SCAN_ASYNC is not set
+@@ -420,6 +421,26 @@ CONFIG_NETDEV_10000=y
+ #
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++CONFIG_USB_PEGASUS=m
++CONFIG_USB_RTL8150=m
++CONFIG_USB_USBNET_MII=m
++CONFIG_USB_USBNET=m
++CONFIG_USB_NET_AX8817X=m
++CONFIG_USB_NET_CDCETHER=m
++# CONFIG_USB_NET_DM9601 is not set
++# CONFIG_USB_NET_GL620A is not set
++# CONFIG_USB_NET_NET1080 is not set
++# CONFIG_USB_NET_PLUSB is not set
++# CONFIG_USB_NET_MCS7830 is not set
++# CONFIG_USB_NET_RNDIS_HOST is not set
++# CONFIG_USB_NET_CDC_SUBSET is not set
++# CONFIG_USB_NET_ZAURUS is not set
+ # CONFIG_WAN is not set
+ # CONFIG_PPP is not set
+ # CONFIG_SLIP is not set
+@@ -446,13 +467,19 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+ # CONFIG_INPUT_JOYDEV is not set
+ # CONFIG_INPUT_TSDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
++CONFIG_INPUT_EVDEV=y
+ # CONFIG_INPUT_EVBUG is not set
+ 
+ #
+ # Input Device Drivers
+ #
+-# CONFIG_INPUT_KEYBOARD is not set
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
+ # CONFIG_INPUT_MOUSE is not set
+ # CONFIG_INPUT_JOYSTICK is not set
+ # CONFIG_INPUT_TABLET is not set
+@@ -534,6 +561,7 @@ CONFIG_SPI_COLDFIRE_SSI_AUDIO=y
+ # CONFIG_VIDEO_DEV is not set
+ # CONFIG_DVB_CORE is not set
+ CONFIG_DAB=y
++# CONFIG_USB_DABUSB is not set
+ 
+ #
+ # Graphics support
+@@ -560,19 +588,144 @@ CONFIG_DUMMY_CONSOLE=y
+ CONFIG_HID_SUPPORT=y
+ CONFIG_HID=y
+ CONFIG_HID_DEBUG=y
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_USB_HIDINPUT_POWERBOOK is not set
++# CONFIG_HID_FF is not set
++# CONFIG_USB_HIDDEV is not set
+ CONFIG_USB_SUPPORT=y
+-# CONFIG_USB_ARCH_HAS_HCD is not set
++CONFIG_USB_ARCH_HAS_HCD=y
+ # CONFIG_USB_ARCH_HAS_OHCI is not set
+-# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++# CONFIG_USB_DEVICE_CLASS is not set
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++CONFIG_USB_EHCI_HCD=m
++CONFIG_USB_EHCI_SPLIT_ISO=y
++CONFIG_USB_EHCI_ROOT_HUB_TT=y
++# CONFIG_USB_EHCI_TT_NEWSCHED is not set
++CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
++CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++CONFIG_USB_M5445X_ULPI=y
++# CONFIG_USB_M5445X_FSLS is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
+ 
+ #
+ # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+ 
+ #
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++# CONFIG_USB_MON is not set
++
++#
++# USB port drivers
++#
++
++#
++# USB Serial Converter support
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_SISUSBVGA is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++
++#
++# USB DSL modem support
++#
++
++#
+ # USB Gadget Support
+ #
+-# CONFIG_USB_GADGET is not set
++CONFIG_USB_GADGET=m
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++CONFIG_USB_GADGET_MCF5445X=y
++CONFIG_USB_MCF5445X=m
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++# CONFIG_USB_ZERO is not set
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
+ # CONFIG_MMC is not set
+ # CONFIG_NEW_LEDS is not set
+ # CONFIG_RTC_CLASS is not set
+@@ -603,7 +756,9 @@ CONFIG_USB_SUPPORT=y
+ #
+ # File systems
+ #
+-# CONFIG_EXT2_FS is not set
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
+ CONFIG_EXT3_FS=y
+ CONFIG_EXT3_FS_XATTR=y
+ # CONFIG_EXT3_FS_POSIX_ACL is not set
diff --git a/target/linux/coldfire/patches/032-m5445x_edma_update.patch b/target/linux/coldfire/patches/032-m5445x_edma_update.patch
new file mode 100644
index 0000000000..17f2becbd0
--- /dev/null
+++ b/target/linux/coldfire/patches/032-m5445x_edma_update.patch
@@ -0,0 +1,553 @@
+From 7b5b08d99d5362e9c36fd7d42d6c06c2a848266c Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Sun, 9 Dec 2007 02:21:19 -0700
+Subject: [PATCH] Update EDMA.
+
+LTIBName: m5445x-edma-update
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/spi/coldfire_edma.c      |  261 +++++++++++++++++++++++---------------
+ include/asm-m68k/coldfire_edma.h |    9 +-
+ include/asm-m68k/mcf5445x_edma.h |   28 +++-
+ 3 files changed, 188 insertions(+), 110 deletions(-)
+
+--- a/drivers/spi/coldfire_edma.c
++++ b/drivers/spi/coldfire_edma.c
+@@ -20,76 +20,91 @@
+ #include <linux/cdev.h>
+ #include <linux/seq_file.h>
+ #include <linux/proc_fs.h>
++#ifdef CONFIG_M54455
+ #include <asm/mcf5445x_edma.h>
+ #include <asm/mcf5445x_intc.h>
++#endif /* CONFIG_M54455 */
+ #include <asm/coldfire_edma.h>
+ 
+-
+-/* callback handler data for each TCD */
++/*
++ * Callback handler data for each TCD
++ */
+ struct edma_isr_record {
+-	edma_irq_handler irq_handler;       /* interrupt handler */
+-	edma_error_handler error_handler;	/* error interrupt handler */
+-	void* dev;							/* device used for the channel */
+-	int  allocated;						/* busy flag */
+-	spinlock_t *lock;					/* spin lock (if needs to be locked in interrupt) */
+-	const char* device_id;				/* device id string, used in proc file system */
++	edma_irq_handler irq_handler;	  /* interrupt handler */
++	edma_error_handler error_handler; /* error interrupt handler */
++	void *arg;			  /* argument to pass back */
++	int allocated;			  /* busy flag */
++	spinlock_t *lock;		  /* spin lock (optional) */
++	const char *device_id;		  /* dev id string, used in procfs */
+ };
+ 
+-/* device structure */
++/*
++ * Device structure
++ */
+ struct coldfire_edma_dev {
+-	struct cdev cdev; 			/* character device */
+-	struct edma_isr_record dma_interrupt_handlers[EDMA_CHANNELS]; /* channel handlers */
++	struct cdev cdev;		  /* character device */
++	struct edma_isr_record dma_interrupt_handlers[EDMA_CHANNELS];
+ };
+ 
+ /* allocated major device number */
+ static int coldfire_dma_major;
++
+ /* device driver structure */
+-static struct coldfire_edma_dev* devp = NULL;
++static struct coldfire_edma_dev *devp = NULL;
+ 
+ /* device driver file operations */
+ struct file_operations coldfire_edma_fops = {
+ 	.owner = THIS_MODULE,
+ };
+ 
+-/* eDMA channel interrupt handler */
++/**
++ * dmaisr - eDMA channel interrupt handler
++ * @irq: interrupt number
++ * @dev_id: argument
++ */
+ static int dmaisr(int irq, void *dev_id)
+ {
+ 	int channel = irq - EDMA_INT_CONTROLLER_BASE - EDMA_INT_CHANNEL_BASE;
+ 	int result = IRQ_HANDLED;
+ 
+-	if (devp!=NULL && devp->dma_interrupt_handlers[channel].lock) {
+-		spin_lock(devp->dma_interrupt_handlers[channel].lock);
+-	}
++	if ((devp != NULL) &&
++	    (devp->dma_interrupt_handlers[channel].irq_handler)) {
++		/* call user irq handler */
++		if (devp->dma_interrupt_handlers[channel].lock)
++			spin_lock(devp->dma_interrupt_handlers[channel].lock);
++
++		result = devp->dma_interrupt_handlers[channel].irq_handler(
++			channel, devp->dma_interrupt_handlers[channel].arg);
+ 
+-	if (devp!=NULL && devp->dma_interrupt_handlers[channel].irq_handler) {
+-		result = devp->dma_interrupt_handlers[channel].irq_handler(channel,
+-							devp->dma_interrupt_handlers[channel].dev);
++   		if (devp->dma_interrupt_handlers[channel].lock)
++			spin_unlock(devp->dma_interrupt_handlers[channel].lock);
+ 	} else {
++		/* no irq handler so just ack it */
+ 		confirm_edma_interrupt_handled(channel);
+-		printk(EDMA_DRIVER_NAME ": No handler for DMA channel %d\n", channel);
+-	}
+-
+-   	if (devp!=NULL && devp->dma_interrupt_handlers[channel].lock) {
+-		spin_unlock(devp->dma_interrupt_handlers[channel].lock);
++		printk(EDMA_DRIVER_NAME ": No handler for DMA channel %d\n",
++		       channel);
+ 	}
+ 
+ 	return result;
+ }
+ 
+-/* eDMA error interrupt handler */
++/**
++ * dma_error_isr - eDMA error interrupt handler
++ * @irq: interrupt number
++ * @dev_id: argument
++ */
+ static int dma_error_isr(int irq, void* dev_id)
+ {
+ 	u16 err;
+ 	int i;
+ 
+ 	err = MCF_EDMA_ERR;
+-	for (i=0;i<EDMA_CHANNELS;i++) {
++	for (i=0; i<EDMA_CHANNELS; i++) {
+ 		if (err & (1<<i)) {
+-			if (devp!=NULL && devp->dma_interrupt_handlers[i].error_handler) {
+-				devp->dma_interrupt_handlers[i].error_handler(i, devp->dma_interrupt_handlers[i].dev);
+-			} else {
++			if (devp!=NULL && devp->dma_interrupt_handlers[i].error_handler)
++				devp->dma_interrupt_handlers[i].error_handler(i, devp->dma_interrupt_handlers[i].arg);
++			else
+ 				printk(KERN_WARNING EDMA_DRIVER_NAME ": DMA error on channel %d\n", i);
+-			}
+ 		}
+ 	}
+ 
+@@ -97,11 +112,26 @@ static int dma_error_isr(int irq, void* 
+ 	return IRQ_HANDLED;
+ }
+ 
+-/* sets channel parameters */
++/**
++ * set_edma_params - Set transfer control descriptor (TCD)
++ * @channel: channel number
++ * @source: source address
++ * @dest: destination address
++ * @attr: attributes
++ * @soff: source offset
++ * @nbytes: number of bytes to be transfered in minor loop
++ * @slast: last source address adjustment
++ * @citer: major loop count
++ * @biter: beginning minor loop count
++ * @doff: destination offset
++ * @dlast_sga: last destination address adjustment
++ * @major_int: generate interrupt after each major loop
++ * @disable_req: disable DMA request after major loop
++ */
+ void set_edma_params(int channel, u32 source, u32 dest,
+-					 u32 attr, u32 soff, u32 nbytes, u32 slast,
+-					 u32 citer, u32 biter, u32 doff, u32 dlast_sga,
+-					 int major_int, int disable_req)
++	u32 attr, u32 soff, u32 nbytes, u32 slast,
++	u32 citer, u32 biter, u32 doff, u32 dlast_sga,
++	int major_int, int disable_req)
+ {
+ 
+ 	if (channel<0 || channel>EDMA_CHANNELS)
+@@ -117,45 +147,56 @@ void set_edma_params(int channel, u32 so
+ 	MCF_EDMA_TCD_BITER(channel)=MCF_EDMA_TCD_BITER_BITER(biter);
+ 	MCF_EDMA_TCD_DOFF(channel) = MCF_EDMA_TCD_DOFF_DOFF(doff);
+ 	MCF_EDMA_TCD_DLAST_SGA(channel) = MCF_EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga);
++
+ 	/* interrupt at the end of major loop */
+-	if (major_int) {
++	if (major_int)
+ 		MCF_EDMA_TCD_CSR(channel) |= MCF_EDMA_TCD_CSR_INT_MAJOR;
+-	} else {
++	else
+ 		MCF_EDMA_TCD_CSR(channel) &= ~MCF_EDMA_TCD_CSR_INT_MAJOR;
+-	}
++
+ 	/* disable request at the end of major loop of transfer or not*/
+-	if (disable_req) {
++	if (disable_req)
+ 		MCF_EDMA_TCD_CSR(channel) |= MCF_EDMA_TCD_CSR_D_REQ;
+-	} else {
++	else
+ 		MCF_EDMA_TCD_CSR(channel) &= ~MCF_EDMA_TCD_CSR_D_REQ;
+-	}
+-
+ }
+ EXPORT_SYMBOL(set_edma_params);
+ 
+-/* init eDMA controller */
++/**
++ * init_edma - Initialize the eDMA controller
++ */
+ void init_edma(void)
+ {
+ 	MCF_EDMA_CR = 0;
+ }
+ EXPORT_SYMBOL(init_edma);
+ 
+-/* request eDMA channel */
++/**
++ * request_edma_channel - Request an eDMA channel
++ * @channel: channel number
++ * @handler: dma handler
++ * @error_handler: dma error handler
++ * @arg: argument to pass back
++ * @lock: optional spinlock to hold over interrupt
++ * @device_id: device id
++ *
++ * Returns 0 if success or a negative value if failure
++ */
+ int request_edma_channel(int channel,
+-						edma_irq_handler handler,
+-						edma_error_handler error_handler,
+-						void* dev,
+-						spinlock_t *lock,
+-						const char* device_id )
++	edma_irq_handler handler,
++	edma_error_handler error_handler,
++	void *arg,
++	spinlock_t *lock,
++	const char *device_id )
+ {
+ 	if (devp!=NULL && channel>=0 && channel<=EDMA_CHANNELS) {
+-		if (devp->dma_interrupt_handlers[channel].allocated) {
++		if (devp->dma_interrupt_handlers[channel].allocated)
+ 			return -EBUSY;
+-		}
++
+ 		devp->dma_interrupt_handlers[channel].allocated = 1;
+ 		devp->dma_interrupt_handlers[channel].irq_handler = handler;
+ 		devp->dma_interrupt_handlers[channel].error_handler = error_handler;
+-		devp->dma_interrupt_handlers[channel].dev = dev;
++		devp->dma_interrupt_handlers[channel].arg = arg;
+ 		devp->dma_interrupt_handlers[channel].lock = lock;
+ 		devp->dma_interrupt_handlers[channel].device_id = device_id;
+ 		return 0;
+@@ -164,16 +205,22 @@ int request_edma_channel(int channel,
+ }
+ EXPORT_SYMBOL(request_edma_channel);
+ 
+-/* free eDMA channel */
+-int free_edma_channel(int channel, void* dev)
++/**
++ * free_edma_channel - Free the edma channel
++ * @channel: channel number
++ * @arg: argument created with
++ *
++ * Returns 0 if success or a negative value if failure
++ */
++int free_edma_channel(int channel, void *arg)
+ {
+ 	if (devp!=NULL && channel>=0 && channel<=EDMA_CHANNELS) {
+ 		if (devp->dma_interrupt_handlers[channel].allocated) {
+-			if (devp->dma_interrupt_handlers[channel].dev != dev) {
++			if (devp->dma_interrupt_handlers[channel].arg != arg)
+ 				return -EBUSY;
+-			}
++
+ 			devp->dma_interrupt_handlers[channel].allocated = 0;
+-			devp->dma_interrupt_handlers[channel].dev = NULL;
++			devp->dma_interrupt_handlers[channel].arg = NULL;
+ 			devp->dma_interrupt_handlers[channel].irq_handler = NULL;
+ 			devp->dma_interrupt_handlers[channel].error_handler = NULL;
+ 			devp->dma_interrupt_handlers[channel].lock = NULL;
+@@ -184,7 +231,9 @@ int free_edma_channel(int channel, void*
+ }
+ EXPORT_SYMBOL(free_edma_channel);
+ 
+-/* clean-up device driver allocated resources */
++/**
++ * coldfire_edma_cleanup - cleanup driver allocated resources
++ */
+ static void coldfire_edma_cleanup(void)
+ {
+ 	dev_t devno;
+@@ -192,13 +241,10 @@ static void coldfire_edma_cleanup(void)
+ 
+ 	/* free interrupts/memory */
+ 	if (devp) {
+-		for (i=0;i<EDMA_CHANNELS;i++)
+-		{
+-			MCF_INTC0_SIMR = EDMA_INT_CHANNEL_BASE+i;
+-			free_irq(EDMA_INT_CHANNEL_BASE+EDMA_INT_CONTROLLER_BASE+i,	devp);
+-		}
+-		MCF_INTC0_SIMR = EDMA_INT_CHANNEL_BASE+EDMA_CHANNELS;
+-		free_irq(EDMA_INT_CHANNEL_BASE+EDMA_INT_CONTROLLER_BASE+EDMA_CHANNELS, devp);
++		for (i=0; i<EDMA_CHANNELS; i++)
++			free_irq(EDMA_INT_BASE+i, devp);
++
++		free_irq(EDMA_INT_BASE+EDMA_INT_ERR, devp);
+ 		cdev_del(&devp->cdev);
+ 		kfree(devp);
+ 	}
+@@ -209,30 +255,42 @@ static void coldfire_edma_cleanup(void)
+ }
+ 
+ #ifdef CONFIG_PROC_FS
+-/* proc file system support */
++/*
++ * proc file system support
++ */
+ 
+ #define FREE_CHANNEL "free"
+ #define DEVICE_UNKNOWN "device unknown"
+ 
++/**
++ * proc_edma_show - print out proc info
++ * @m: seq_file
++ * @v:
++ */
+ static int proc_edma_show(struct seq_file *m, void *v)
+ {
+ 	int i;
+ 
+-	if (devp==NULL) return 0;
++	if (devp == NULL)
++		return 0;
+ 
+ 	for (i = 0 ; i < EDMA_CHANNELS ; i++) {
+ 		if (devp->dma_interrupt_handlers[i].allocated) {
+ 			if (devp->dma_interrupt_handlers[i].device_id)
+-		    	seq_printf(m, "%2d: %s\n", i, devp->dma_interrupt_handlers[i].device_id);
++		    		seq_printf(m, "%2d: %s\n", i, devp->dma_interrupt_handlers[i].device_id);
+ 			else
+ 				seq_printf(m, "%2d: %s\n", i, DEVICE_UNKNOWN);
+-		} else {
++		} else
+ 			seq_printf(m, "%2d: %s\n", i, FREE_CHANNEL);
+-		}
+ 	}
+ 	return 0;
+ }
+ 
++/**
++ * proc_edma_open - open the proc file
++ * @inode: inode ptr
++ * @file: file ptr
++ */
+ static int proc_edma_open(struct inode *inode, struct file *file)
+ {
+ 	return single_open(file, proc_edma_show, NULL);
+@@ -245,6 +303,9 @@ static const struct file_operations proc
+ 	.release	= single_release,
+ };
+ 
++/**
++ * proc_edma_init - initialize proc filesystem
++ */
+ static int __init proc_edma_init(void)
+ {
+ 	struct proc_dir_entry *e;
+@@ -258,7 +319,9 @@ static int __init proc_edma_init(void)
+ 
+ #endif
+ 
+-/* initializes device driver */
++/**
++ * coldfire_edma_init - eDMA module init
++ */
+ static int __init coldfire_edma_init(void)
+ {
+ 	dev_t dev;
+@@ -267,8 +330,9 @@ static int __init coldfire_edma_init(voi
+ 
+ 	/* allocate free major number */
+ 	result = alloc_chrdev_region(&dev, DMA_DEV_MINOR, 1, EDMA_DRIVER_NAME);
+-	if (result<0) {
+-		printk(KERN_WARNING EDMA_DRIVER_NAME": can't get major %d\n", result);
++	if (result < 0) {
++		printk(KERN_WARNING EDMA_DRIVER_NAME": can't get major %d\n",
++		       result);
+ 		return result;
+ 	}
+ 	coldfire_dma_major = MAJOR(dev);
+@@ -280,71 +344,68 @@ static int __init coldfire_edma_init(voi
+ 		goto fail;
+ 	}
+ 
+-	/* init handlers (no handlers for beggining) */
+-   	for (i=0;i<EDMA_CHANNELS;i++) {
++	/* init handlers (no handlers for beginning) */
++   	for (i = 0; i < EDMA_CHANNELS; i++) {
+ 		devp->dma_interrupt_handlers[i].irq_handler = NULL;
+ 		devp->dma_interrupt_handlers[i].error_handler = NULL;
+-		devp->dma_interrupt_handlers[i].dev = NULL;
++		devp->dma_interrupt_handlers[i].arg = NULL;
+ 		devp->dma_interrupt_handlers[i].allocated = 0;
+ 		devp->dma_interrupt_handlers[i].lock = NULL;
+ 		devp->dma_interrupt_handlers[i].device_id = NULL;
+ 	}
+ 
+-    /* register char device */
++	/* register char device */
+ 	cdev_init(&devp->cdev, &coldfire_edma_fops);
+ 	devp->cdev.owner = THIS_MODULE;
+ 	devp->cdev.ops = &coldfire_edma_fops;
+ 	result = cdev_add(&devp->cdev, dev, 1);
+ 	if (result) {
+-		printk(KERN_NOTICE EDMA_DRIVER_NAME": Error %d adding coldfire-dma device\n", result);
++		printk(KERN_NOTICE EDMA_DRIVER_NAME
++		       ": Error %d adding coldfire-dma device\n", result);
+ 		result = -ENODEV;
+ 		goto fail;
+ 	}
+ 
+ 	/* request/enable irq for each eDMA channel */
+-	for (i=0;i<EDMA_CHANNELS;i++)
+-	{
+-		result = request_irq(EDMA_INT_CHANNEL_BASE+EDMA_INT_CONTROLLER_BASE+i,
+-			dmaisr, SA_INTERRUPT, EDMA_DRIVER_NAME, devp);
++	for (i = 0; i < EDMA_CHANNELS;i++) {
++		result = request_irq(EDMA_INT_BASE + i,
++				     dmaisr, IRQF_DISABLED,
++				     EDMA_DRIVER_NAME, devp);
+ 		if (result) {
+-			printk(KERN_WARNING EDMA_DRIVER_NAME": Cannot request irq %d\n",
+-				EDMA_INT_CHANNEL_BASE+EDMA_INT_CONTROLLER_BASE+i);
++			printk(KERN_WARNING EDMA_DRIVER_NAME
++			       ": Cannot request irq %d\n",
++			       (EDMA_INT_BASE + EDMA_INT_ERR+i));
+ 			result = -EBUSY;
+ 			goto fail;
+ 		}
+-
+-		MCF_INTC0_ICR(EDMA_INT_CHANNEL_BASE+i) = EDMA_IRQ_LEVEL;
+-		MCF_INTC0_CIMR = EDMA_INT_CHANNEL_BASE+i;
+-
+ 	}
+ 
+-    /* request error interrupt */
+-	result = request_irq(EDMA_INT_CHANNEL_BASE + EDMA_INT_CONTROLLER_BASE + EDMA_CHANNELS,
+-				dma_error_isr, SA_INTERRUPT, EDMA_DRIVER_NAME, devp);
++	/* request error interrupt */
++	result = request_irq(EDMA_INT_BASE + EDMA_INT_ERR,
++			     dma_error_isr, IRQF_DISABLED,
++			     EDMA_DRIVER_NAME, devp);
+ 	if (result) {
+-		printk(KERN_WARNING EDMA_DRIVER_NAME": Cannot request irq %d\n",
+-				EDMA_INT_CHANNEL_BASE+EDMA_INT_CONTROLLER_BASE+EDMA_CHANNELS);
++		printk(KERN_WARNING EDMA_DRIVER_NAME
++		       ": Cannot request irq %d\n",
++		       (EDMA_INT_BASE + EDMA_INT_ERR));
+ 		result = -EBUSY;
+ 		goto fail;
+ 	}
+ 
+-	/* enable error interrupt in interrupt controller */
+-	MCF_INTC0_ICR(EDMA_INT_CHANNEL_BASE+EDMA_CHANNELS) = EDMA_IRQ_LEVEL;
+-	MCF_INTC0_CIMR = EDMA_INT_CHANNEL_BASE+EDMA_CHANNELS;
+-
+ #ifdef CONFIG_PROC_FS
+ 	proc_edma_init();
+ #endif
+ 
+ 	printk(EDMA_DRIVER_NAME ": initialized successfully\n");
+-
+ 	return 0;
+ fail:
+ 	coldfire_edma_cleanup();
+ 	return result;
+-
+ }
+ 
++/**
++ * coldfire_edma_exit - eDMA module exit
++ */
+ static void __exit coldfire_edma_exit(void)
+ {
+ 	coldfire_edma_cleanup();
+@@ -354,5 +415,5 @@ module_init(coldfire_edma_init);
+ module_exit(coldfire_edma_exit);
+ 
+ MODULE_LICENSE("GPL");
+-MODULE_AUTHOR("Yaroslav Vinogradov, Freescale Inc.");
+-MODULE_DESCRIPTION("eDMA library for Coldfire 5445x");
++MODULE_AUTHOR("Freescale Semiconductor, Inc.");
++MODULE_DESCRIPTION("eDMA library for Coldfire M5445x");
+--- a/include/asm-m68k/coldfire_edma.h
++++ b/include/asm-m68k/coldfire_edma.h
+@@ -20,11 +20,14 @@
+ #define EDMA_DRIVER_NAME "ColdFire-eDMA"
+ #define DMA_DEV_MINOR 1
+ 
++#ifdef CONFIG_M54455
+ #define EDMA_INT_CHANNEL_BASE 		8
+ #define EDMA_INT_CONTROLLER_BASE 	64
++#define EDMA_INT_BASE			(EDMA_INT_CHANNEL_BASE + \
++					 EDMA_INT_CONTROLLER_BASE)
+ #define EDMA_CHANNELS			16
+- 
+-#define EDMA_IRQ_LEVEL			5
++#define EDMA_INT_ERR			16	/* edma error interrupt */
++#endif /* CONFIG_M54455 */
+  
+ typedef irqreturn_t (*edma_irq_handler)(int, void *);
+ typedef void (*edma_error_handler)(int, void *);
+@@ -38,7 +41,7 @@ typedef void (*edma_error_handler)(int, 
+  *   nbytes  - number of bytes to be transfered in minor loop
+  *   slast   - last source address adjustment
+  *   citer   - major loop count
+- *   biter   - beggining minor loop count
++ *   biter   - begining minor loop count
+  *   doff    - destination offset
+  *   dlast_sga - last destination address adjustment
+  *   major_int - generate interrupt after each major loop
+--- a/include/asm-m68k/mcf5445x_edma.h
++++ b/include/asm-m68k/mcf5445x_edma.h
+@@ -11,11 +11,27 @@
+ #ifndef __MCF5445X_EDMA_H__
+ #define __MCF5445X_EDMA_H__
+ 
+-/*********************************************************************
+-*
+-* Enhanced DMA (EDMA)
+-*
+-*********************************************************************/
++/*
++ * Enhanced DMA (EDMA)
++ */
++
++/* Channels */
++#define MCF_EDMA_CHAN_DREQ0	0	/* External DMA request 0 */
++#define MCF_EDMA_CHAN_DREQ1	1	/* External DMA request 1 */
++#define MCF_EDMA_CHAN_UART0_RX	2	/* UART0 Receive */
++#define MCF_EDMA_CHAN_UART0_TX	3	/* UART0 Transmit */
++#define MCF_EDMA_CHAN_UART1_RX	4	/* UART1 Receive */
++#define MCF_EDMA_CHAN_UART1_TX	5	/* UART1 Transmit */
++#define MCF_EDMA_CHAN_UART2_RX	6	/* UART2 Receive */
++#define MCF_EDMA_CHAN_UART2_TX	7	/* UART2 Transmit */
++#define MCF_EDMA_CHAN_TIMER0	8	/* Timer 0 / SSI0 Rx */
++#define MCF_EDMA_CHAN_TIMER1	9	/* Timer 1 / SSI1 Rx */
++#define MCF_EDMA_CHAN_TIMER2	10	/* Timer 2 / SSI0 Tx */
++#define MCF_EDMA_CHAN_TIMER3	11	/* Timer 3 / SSI1 Tx */
++#define MCF_EDMA_CHAN_DSPI_RX	12	/* DSPI Receive */
++#define MCF_EDMA_CHAN_DSPI_TX	13	/* DSPI Transmit */
++#define MCF_EDMA_CHAN_ATA_RX	14	/* ATA Receive */
++#define MCF_EDMA_CHAN_ATA_TX	15	/* ATA Transmit */
+ 
+ /* Register read/write macros */
+ #define MCF_EDMA_CR                     MCF_REG32(0xFC044000)
+@@ -1453,6 +1469,4 @@
+ #define MCF_EDMA_TCD15_CSR_LINKCH(x)    (((x)&0x003F)<<8)
+ #define MCF_EDMA_TCD15_CSR_BWC(x)       (((x)&0x0003)<<14)
+ 
+-/********************************************************************/
+-
+ #endif /* __MCF5445X_EDMA_H__ */
diff --git a/target/linux/coldfire/patches/033-m5445x_ssi_cleanup.patch b/target/linux/coldfire/patches/033-m5445x_ssi_cleanup.patch
new file mode 100644
index 0000000000..068323b06d
--- /dev/null
+++ b/target/linux/coldfire/patches/033-m5445x_ssi_cleanup.patch
@@ -0,0 +1,437 @@
+From 98e15babf1e25868d22c024dac6133cc29059d39 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Sun, 9 Dec 2007 02:24:13 -0700
+Subject: [PATCH] Fix DMA mode and cleanup driver.
+
+LTIBName: m5445x-ssi-cleanup
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/spi/ssi_audio.c |  207 ++++++++++++++++++++++++-----------------------
+ 1 files changed, 104 insertions(+), 103 deletions(-)
+
+--- a/drivers/spi/ssi_audio.c
++++ b/drivers/spi/ssi_audio.c
+@@ -2,7 +2,7 @@
+  * MCF5445x audio driver.
+  *
+  * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
+- * Copyright Freescale Semiconductor, Inc. 2006
++ * Copyright Freescale Semiconductor, Inc. 2006, 2007
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+@@ -25,9 +25,11 @@
+ 
+ #include <asm/coldfire.h>
+ #include <asm/coldfire_edma.h>
++#ifdef CONFIG_M54455
+ #include <asm/mcf5445x_ssi.h>
+ #include <asm/mcf5445x_ccm.h>
+ #include <asm/mcf5445x_gpio.h>
++#endif
+ 
+ #define SOUND_DEVICE_NAME "sound"
+ #define DRIVER_NAME "ssi_audio"
+@@ -47,8 +49,8 @@
+ 
+ /* TLV320DAC23 audio chip registers */
+ 
+-#define CODEC_LEFT_IN_REG			(0x00)
+-#define CODEC_RIGHT_IN_REG			(0x01)
++#define CODEC_LEFT_IN_REG		(0x00)
++#define CODEC_RIGHT_IN_REG		(0x01)
+ #define CODEC_LEFT_HP_VOL_REG		(0x02)
+ #define CODEC_RIGHT_HP_VOL_REG		(0x03)
+ #define CODEC_ANALOG_APATH_REG		(0x04)
+@@ -57,7 +59,7 @@
+ #define CODEC_DIGITAL_IF_FMT_REG	(0x07)
+ #define CODEC_SAMPLE_RATE_REG		(0x08)
+ #define CODEC_DIGITAL_IF_ACT_REG	(0x09)
+-#define CODEC_RESET_REG				(0x0f)
++#define CODEC_RESET_REG			(0x0f)
+ 
+ #define CODEC_SAMPLE_8KHZ		(0x0C)
+ #define CODEC_SAMPLE_16KHZ		(0x58)
+@@ -71,21 +73,21 @@
+ /* DMA transfer size */
+ #define DMASIZE		(16*1024)
+ 
+-/* transmit eDMA channel for SSI channel 0 */
+-#define DMA_TCD 	10
+-/* transmit eDMA channel for SSI channel 1 */
+-#define DMA_TCD2 	11
++/* eDMA channel for SSI channel 0 TX */
++#define DMA_TCD 	MCF_EDMA_CHAN_TIMER2
++/* eDMA channel for SSI channel 1 TX */
++#define DMA_TCD2 	MCF_EDMA_CHAN_TIMER3
+ 
+ struct ssi_audio {
+-	struct spi_device	*spi;
++	struct spi_device *spi;
+ 	u32 speed;
+ 	u32 stereo;
+ 	u32 bits;
+ 	u32 format;
+-	u8  isopen;
+-	u8  dmaing;
+-	u8  ssi_enabled;
+-	u8  channel;
++	u8 isopen;
++	u8 dmaing;
++	u8 ssi_enabled;
++	u8 channel;
+ 	spinlock_t lock;
+ 	u8* audio_buf;
+ };
+@@ -129,7 +131,8 @@ static void ssi_audio_setsamplesize(int 
+ 	}
+ 
+ #ifdef AUDIO_DEBUG
+-	printk(DRIVER_NAME ":ssi_audio_setsamplesize %d %d\n", audio_device->format, audio_device->bits);
++	printk(DRIVER_NAME ":ssi_audio_setsamplesize %d %d\n",
++	       audio_device->format, audio_device->bits);
+ #endif
+ }
+ 
+@@ -157,62 +160,57 @@ void __inline__ ssi_audio_dmarun(void)
+ {
+ 	set_edma_params(DMA_TCD,
+ #ifdef USE_MMU
+-					virt_to_phys(&(audio_device->audio_buf[audio_start])),
++			virt_to_phys(&(audio_device->audio_buf[audio_start])),
+ #else
+-					(u32)&(audio_device->audio_buf[audio_start]),
++			(u32)&(audio_device->audio_buf[audio_start]),
+ #endif
+-					(u32)&MCF_SSI_TX0,
+-					MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
+-					8,
+-					4,
+-					0,
+-					audio_count/8,
+-					audio_count/8,
+-					0,
+-					0,
+-					0, // major_int
+-					0  // disable_req
+-					);
++			(u32)&MCF_SSI_TX0,
++			MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
++			8,
++			4,
++			0,
++			audio_count/8,
++			audio_count/8,
++			0,
++			0,
++			0, // major_int
++			0  // disable_req
++			);
+ 
+ 	set_edma_params(DMA_TCD2,
+ #ifdef USE_MMU
+-					virt_to_phys(&(audio_device->audio_buf[audio_start+4])),
++			virt_to_phys(&(audio_device->audio_buf[audio_start+4])),
+ #else
+-					(u32)&(audio_device->audio_buf[audio_start+4]),
++			(u32)&(audio_device->audio_buf[audio_start+4]),
+ #endif
+-					(u32)&MCF_SSI_TX1,
+-					MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
+-					8,
+-					4,
+-					0,
+-					audio_count/8,
+-					audio_count/8,
+-					0,
+-					0,
+-					1, // major_int
+-                    0  // disable_req
+-					);
++			(u32)&MCF_SSI_TX1,
++			MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
++			8,
++			4,
++			0,
++			audio_count/8,
++			audio_count/8,
++			0,
++			0,
++			1, // major_int
++                    	0  // disable_req
++			);
+ 
+ 	audio_device->dmaing = 1;
+ 	audio_txbusy = 1;
+ 
+ 	start_edma_transfer(DMA_TCD);
+ 	start_edma_transfer(DMA_TCD2);
+-#if 0
+-	MCF_EDMA_ERQ |= (1<<DMA_TCD) | (1<<DMA_TCD2);
+-	MCF_EDMA_SSRT = DMA_TCD;
+-	MCF_EDMA_SSRT = DMA_TCD2;
+-#endif
+-
+ }
+ 
+-/*
+- *	Start DMA'ing a new buffer of data if any available.
++/**
++ * ssi_audio_dmabuf - Start DMA'ing a new buffer of data if any available.
+  */
+ static void ssi_audio_dmabuf(void)
+ {
+ #ifdef AUDIO_DEBUG
+-	printk(DRIVER_NAME ":ssi_audio_dmabuf(): append=%x start=%x\n", audio_append, audio_appstart);
++	printk(DRIVER_NAME ":ssi_audio_dmabuf(): append=%x start=%x\n",
++	       audio_append, audio_appstart);
+ #endif
+ 
+ 	/* If already running then nothing to do... */
+@@ -241,7 +239,8 @@ static void ssi_audio_dmabuf(void)
+ 	}
+ }
+ 
+-void __inline__ stop_dma(void) {
++void __inline__ stop_dma(void)
++{
+ 	stop_edma_transfer(DMA_TCD);
+ 	stop_edma_transfer(DMA_TCD2);
+ }
+@@ -283,7 +282,6 @@ static void init_dma(void)
+ 
+ #endif	/* CONFIG_SSIAUDIO_USE_EDMA */
+ 
+-
+ /* Write CODEC register using SPI
+  *   address - CODEC register address
+  *   data - data to be written into register
+@@ -296,7 +294,8 @@ static int codec_write(u8 addr, u16 data
+ 		return -ENODEV;
+ 
+ 	spi_word = ((addr & 0x7F)<<9)|(data & 0x1FF);
+-	return spi_write(audio_device->spi, (const u8*)&spi_word, sizeof(spi_word));
++	return spi_write(audio_device->spi, (const u8*)&spi_word,
++			 sizeof(spi_word));
+ }
+ 
+ static inline void enable_ssi(void)
+@@ -359,7 +358,7 @@ static void init_audio_codec(void)
+ 	codec_write(CODEC_DIGITAL_APATH_REG, 0x007); /* Set A path */
+ 
+ 	/* set sample rate */
+-    adjust_codec_speed();
++	adjust_codec_speed();
+ 
+ 	codec_write(CODEC_LEFT_HP_VOL_REG, 0x075); /* set volume */
+ 	codec_write(CODEC_RIGHT_HP_VOL_REG, 0x075); /* set volume */
+@@ -375,13 +374,12 @@ static void chip_init(void)
+ #endif
+ 
+ 	/* Enable the SSI pins */
+-	MCF_GPIO_PAR_SSI = ( 0
+-							| MCF_GPIO_PAR_SSI_MCLK
+-							| MCF_GPIO_PAR_SSI_STXD(3)
+-							| MCF_GPIO_PAR_SSI_SRXD(3)
+-							| MCF_GPIO_PAR_SSI_FS(3)
+-							| MCF_GPIO_PAR_SSI_BCLK(3) );
+-
++	MCF_GPIO_PAR_SSI = (0
++			    | MCF_GPIO_PAR_SSI_MCLK
++			    | MCF_GPIO_PAR_SSI_STXD(3)
++			    | MCF_GPIO_PAR_SSI_SRXD(3)
++			    | MCF_GPIO_PAR_SSI_FS(3)
++			    | MCF_GPIO_PAR_SSI_BCLK(3) );
+ }
+ 
+ static void init_ssi(void)
+@@ -430,8 +428,8 @@ static void init_ssi(void)
+ 			;
+ 
+ 	MCF_SSI_FCSR = 0
+-			| MCF_SSI_FCSR_TFWM0(0)
+-			| MCF_SSI_FCSR_TFWM1(0)
++			| MCF_SSI_FCSR_TFWM0(2)
++			| MCF_SSI_FCSR_TFWM1(2)
+ 			;
+ 
+ 	MCF_SSI_IER =   0 // interrupts
+@@ -459,9 +457,8 @@ static int ssi_audio_isr(int irq, void *
+ {
+ 	unsigned long	*bp;
+ 
+-	if (audio_txbusy==0) {
++	if (audio_txbusy==0)
+ 		return IRQ_HANDLED;
+-	}
+ 
+ 	spin_lock(&(audio_device->lock));
+ 
+@@ -560,7 +557,8 @@ static int ssi_audio_close(struct inode 
+ }
+ 
+ /* write to audio device */
+-static ssize_t ssi_audio_write(struct file *filp, const char *buf, size_t count, loff_t *ppos)
++static ssize_t ssi_audio_write(struct file *filp, const char *buf,
++	size_t count, loff_t *ppos)
+ {
+ 	unsigned long	*dp, *buflp;
+ 	unsigned short	*bufwp;
+@@ -568,10 +566,12 @@ static ssize_t ssi_audio_write(struct fi
+ 	unsigned int	slen, bufcnt, i, s, e;
+ 
+ #ifdef AUDIO_DEBUG
+-	printk(DRIVER_NAME ":ssi_audio_write(buf=%x,count=%d)\n", (int) buf, count);
++	printk(DRIVER_NAME ":ssi_audio_write(buf=%x,count=%d)\n",
++	       (int)buf, count);
+ #endif
+ 
+-	if (audio_device==NULL) return (-ENODEV);
++	if (audio_device==NULL)
++		return (-ENODEV);
+ 
+ 	if (count <= 0)
+ 		return 0;
+@@ -592,8 +592,8 @@ static ssize_t ssi_audio_write(struct fi
+ 
+ tryagain:
+ 	/*
+-	 *	Get a snapshot of buffer, so we can figure out how
+-	 *	much data we can fit in...
++	 * Get a snapshot of buffer, so we can figure out how
++	 * much data we can fit in...
+ 	 */
+ 	s = audio_start;
+ 	e = audio_append;
+@@ -613,11 +613,12 @@ tryagain:
+ 		goto tryagain;
+ 	}
+ 
+-	/* For DMA we need to have data as 32 bit
+-	   values (since SSI TX register is 32 bit).
+-	   So, the incomming 16 bit data must be put to buffer as 32 bit values.
+-	   Also, the endianess is converted if needed
+-	*/
++	/*
++	 * For DMA we need to have data as 32 bit
++	 * values (since SSI TX register is 32 bit).
++	 * So, the incoming 16 bit data must be put to buffer as 32 bit values.
++	 * Also, the endianess is converted if needed
++	 */
+ 	if (audio_device->stereo) {
+ 		if (audio_device->bits == 16) {
+ 			if (audio_device->format==AFMT_S16_LE) {
+@@ -678,16 +679,19 @@ tryagain:
+ }
+ 
+ /* ioctl: control the driver */
+-static int ssi_audio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
++static int ssi_audio_ioctl(struct inode *inode, struct file *filp,
++	unsigned int cmd, unsigned long arg)
+ {
+-	long	val;
+-	int	rc = 0;
++	long val;
++	int rc = 0;
+ 
+ #ifdef AUDIO_DEBUG
+-    printk(DRIVER_NAME ":ssi_audio_ioctl(cmd=%x,arg=%x)\n", (int) cmd, (int) arg);
++    printk(DRIVER_NAME ":ssi_audio_ioctl(cmd=%x,arg=%x)\n",
++	   (int)cmd, (int)arg);
+ #endif
+ 
+-	if (audio_device==NULL) return (-ENODEV);
++	if (audio_device==NULL)
++		return (-ENODEV);
+ 
+ 	switch (cmd) {
+ 
+@@ -744,8 +748,6 @@ static int ssi_audio_ioctl(struct inode 
+ 	return rc;
+ }
+ 
+-/****************************************************************************/
+-
+ struct file_operations	ssi_audio_fops = {
+ 	open: ssi_audio_open,		/* open */
+ 	release: ssi_audio_close,	/* close */
+@@ -756,8 +758,8 @@ struct file_operations	ssi_audio_fops = 
+ /* initialize audio driver */
+ static int __devinit ssi_audio_probe(struct spi_device *spi)
+ {
+-	struct ssi_audio	*audio;
+-	int	err;
++	struct ssi_audio *audio;
++	int err;
+ 
+ #ifdef AUDIO_DEBUG
+ 	printk(DRIVER_NAME": probe\n");
+@@ -804,7 +806,7 @@ static int __devinit ssi_audio_probe(str
+ 	audio->spi = spi;
+ 
+ #ifndef CONFIG_SSIAUDIO_USE_EDMA
+-	if (request_irq(spi->irq, ssi_audio_isr, SA_INTERRUPT,	spi->dev.bus_id, audio)) {
++	if (request_irq(spi->irq, ssi_audio_isr, IRQF_DISABLED,	spi->dev.bus_id, audio)) {
+ 		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
+ 		err = -EBUSY;
+ 		goto err_free_mem;
+@@ -813,25 +815,21 @@ static int __devinit ssi_audio_probe(str
+ #else
+ 	/* request 2 eDMA channels since two channel output mode is used */
+ 	if (request_edma_channel(DMA_TCD,
+-							ssi_audio_dma_handler_empty,
+-							NULL,
+-							audio,
+-							&(audio_device->lock),
+-							DRIVER_NAME
+-							)!=0)
+-	{
++				 ssi_audio_dma_handler_empty,
++				 NULL,
++				 audio,
++				 &(audio_device->lock),
++				 DRIVER_NAME)!=0) {
+ 		dev_dbg(&spi->dev, "DMA channel %d busy?\n", DMA_TCD);
+ 		err = -EBUSY;
+ 		goto err_free_mem;
+ 	}
+ 	if (request_edma_channel(DMA_TCD2,
+-							ssi_audio_dma_handler,
+-							NULL,
+-							audio,
+-							&(audio_device->lock),
+-							DRIVER_NAME
+-							)!=0)
+-	{
++				 ssi_audio_dma_handler,
++				 NULL,
++				 audio,
++				 &(audio_device->lock),
++				 DRIVER_NAME)!=0) {
+ 		dev_dbg(&spi->dev, "DMA channel %d busy?\n", DMA_TCD2);
+ 		err = -EBUSY;
+ 		goto err_free_mem;
+@@ -870,11 +868,13 @@ static int __devexit ssi_audio_remove(st
+ 	return 0;
+ }
+ 
+-static int ssi_audio_suspend(struct spi_device *spi, pm_message_t message) {
++static int ssi_audio_suspend(struct spi_device *spi, pm_message_t message)
++{
+ 	return 0;
+ }
+ 
+-static int ssi_audio_resume(struct spi_device *spi) {
++static int ssi_audio_resume(struct spi_device *spi)
++{
+ 	return 0;
+ }
+ 
+@@ -902,5 +902,6 @@ static void __exit ssi_audio_exit(void)
+ }
+ module_exit(ssi_audio_exit);
+ 
+-MODULE_DESCRIPTION("SSI/I2S Audio Driver");
+ MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Freescale Semiconductor, Inc.");
++MODULE_DESCRIPTION("SSI/I2S Audio Driver");
diff --git a/target/linux/coldfire/patches/034-m5445x_spi_deprecated_api.patch b/target/linux/coldfire/patches/034-m5445x_spi_deprecated_api.patch
new file mode 100644
index 0000000000..7e96268cd5
--- /dev/null
+++ b/target/linux/coldfire/patches/034-m5445x_spi_deprecated_api.patch
@@ -0,0 +1,22 @@
+From b999c1fe5c6e5fa4f7e43fae02f59fc547d18093 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Sun, 9 Dec 2007 02:24:57 -0700
+Subject: [PATCH] Fix use of deprecated API.
+
+LTIBName: m5445x-spi-deprecated-api
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/spi/spi_coldfire.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+--- a/drivers/spi/spi_coldfire.c
++++ b/drivers/spi/spi_coldfire.c
+@@ -1311,7 +1311,7 @@ static int coldfire_spi_probe(struct pla
+ 
+ 	irq = platform_info->irq_vector;
+ 
+-	status = request_irq(platform_info->irq_vector, qspi_interrupt, SA_INTERRUPT, dev->bus_id, drv_data);
++	status = request_irq(platform_info->irq_vector, qspi_interrupt, IRQF_DISABLED, dev->bus_id, drv_data);
+ 	if (status < 0) {
+ 		dev_err(&pdev->dev, "unable to attach ColdFire QSPI interrupt\n");
+ 		goto out_error_master_alloc;
diff --git a/target/linux/coldfire/patches/035-mcfv4e_bitops_cleanup.patch b/target/linux/coldfire/patches/035-mcfv4e_bitops_cleanup.patch
new file mode 100644
index 0000000000..c4f8cecdbc
--- /dev/null
+++ b/target/linux/coldfire/patches/035-mcfv4e_bitops_cleanup.patch
@@ -0,0 +1,83 @@
+From 898b269952d096ce3f990c51b02457c27e16b83c Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Sun, 9 Dec 2007 02:25:49 -0700
+Subject: [PATCH] Clean up formatting.
+
+LTIBName: mcfv4e-bitops-cleanup
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ include/asm-m68k/bitops.h |   21 ++++++++++++++-------
+ 1 files changed, 14 insertions(+), 7 deletions(-)
+
+--- a/include/asm-m68k/bitops.h
++++ b/include/asm-m68k/bitops.h
+@@ -478,7 +478,8 @@ static __inline__ int __constant_coldfir
+ 	return retval;
+ }
+ #else
+-static __inline__ int __constant_coldfire_test_and_set_bit(int nr,volatile void * vaddr)
++static __inline__ int __constant_coldfire_test_and_set_bit(int nr,
++	volatile void *vaddr)
+ {
+ 	char retval;
+ 	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
+@@ -516,7 +517,8 @@ static __inline__ void __constant_coldfi
+ 	     : "+QUd" (*p) : "di" (nr & 7));
+ }
+ #else
+-static __inline__ void __constant_coldfire_set_bit(int nr, volatile void * vaddr)
++static __inline__ void __constant_coldfire_set_bit(int nr,
++	volatile void *vaddr)
+ {
+ 	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
+ 	__asm__ __volatile__ ("bset %1,(%3)"
+@@ -524,7 +526,8 @@ static __inline__ void __constant_coldfi
+ }
+ #endif
+ 
+-static __inline__ void __generic_coldfire_set_bit(int nr, volatile void *vaddr)
++static __inline__ void __generic_coldfire_set_bit(int nr,
++	volatile void *vaddr)
+ {
+ 	__asm__ __volatile__ ("bset %1,%0"
+ 	     : "=m" (((volatile char *)vaddr)[(nr^31) >> 3])
+@@ -552,7 +555,8 @@ static __inline__ int __constant_coldfir
+ 	return retval;
+ }
+ #else
+-static __inline__ int __constant_coldfire_test_and_clear_bit(int nr, volatile void *vaddr)
++static __inline__ int __constant_coldfire_test_and_clear_bit(int nr,
++	volatile void *vaddr)
+ {
+ 	char retval;
+ 	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
+@@ -599,7 +603,8 @@ static __inline__ void __constant_coldfi
+ 	     : "+QUd" (*p) : "id" (nr & 7));
+ }
+ #else
+-static __inline__ void __constant_coldfire_clear_bit(int nr, volatile void * vaddr)
++static __inline__ void __constant_coldfire_clear_bit(int nr,
++	volatile void *vaddr)
+ {
+ 	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
+ 	__asm__ __volatile__ ("bclr %1,(%3)"
+@@ -636,7 +641,8 @@ static __inline__ int __constant_coldfir
+ 	return retval;
+ }
+ #else
+-static __inline__ int __constant_coldfire_test_and_change_bit(int nr, volatile void * vaddr)
++static __inline__ int __constant_coldfire_test_and_change_bit(int nr,
++	volatile void *vaddr)
+ {
+ 	char retval;
+ 	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
+@@ -678,7 +684,8 @@ static __inline__ void __constant_coldfi
+ 	     : "+QUd" (*p) : "id" (nr & 7));
+ }
+ #else
+-static __inline__ void __constant_coldfire_change_bit(int nr, volatile void * vaddr)
++static __inline__ void __constant_coldfire_change_bit(int nr,
++	volatile void *vaddr)
+ {
+ 	volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3];
+ 	__asm__ __volatile__ ("bchg %1,(%3)"
diff --git a/target/linux/coldfire/patches/036-m5445x_pci.patch b/target/linux/coldfire/patches/036-m5445x_pci.patch
new file mode 100644
index 0000000000..abeaad42c3
--- /dev/null
+++ b/target/linux/coldfire/patches/036-m5445x_pci.patch
@@ -0,0 +1,251 @@
+From da8e8fe3d6ad5eb9589c8e77e7716e4f7e1a7499 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Mon, 10 Dec 2007 03:36:05 -0700
+Subject: [PATCH] Coldfire M5445x PCI Bits.
+
+LTIBName: m5445x-pci
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/Kconfig                     |   12 ++++++++++--
+ arch/m68k/Makefile                    |    4 ++++
+ arch/m68k/coldfire/config.c           |    2 +-
+ arch/m68k/coldfire/iomap.c            |    2 ++
+ arch/m68k/coldfire/mcf5445x-devices.c |    9 +++++++++
+ arch/m68k/coldfire/mcf5445x-pci.c     |    5 +++--
+ arch/m68k/coldfire/pci.c              |    6 +++---
+ arch/m68k/kernel/Makefile             |    2 +-
+ drivers/macintosh/Kconfig             |    1 -
+ drivers/pci/Makefile                  |    1 +
+ include/asm-m68k/io.h                 |   13 ++++++++++++-
+ include/asm-m68k/pci.h                |    2 ++
+ 12 files changed, 48 insertions(+), 11 deletions(-)
+
+--- a/arch/m68k/Kconfig
++++ b/arch/m68k/Kconfig
+@@ -11,6 +11,14 @@ config MMU
+ 	bool
+ 	default y
+ 
++config GENERIC_TIME
++        bool
++        default n
++
++config GENERIC_CLOCKEVENTS
++        bool
++        default n
++
+ config RWSEM_GENERIC_SPINLOCK
+ 	bool
+ 	default y
+@@ -48,7 +56,7 @@ config ARCH_MAY_HAVE_PC_FDC
+ 	default y
+ 
+ config NO_IOPORT
+-	def_bool y
++	def_bool !M54455
+ 
+ config NO_DMA
+ 	def_bool SUN3
+@@ -159,7 +167,7 @@ config HADES
+ 
+ config PCI
+ 	bool
+-	depends on HADES
++	depends on HADES || M54455
+ 	default y
+ 	help
+ 	  Find out whether you have a PCI motherboard. PCI is the name of a
+--- a/arch/m68k/Makefile
++++ b/arch/m68k/Makefile
+@@ -32,6 +32,10 @@ ifdef CONFIG_SUN3
+ LDFLAGS_vmlinux = -N
+ endif
+ 
++ifdef CONFIG_COLDFIRE
++# LDFLAGS_vmlinux = --verbose
++endif
++
+ CHECKFLAGS += -D__mc68000__
+ 
+ # without -fno-strength-reduce the 53c7xx.c driver fails ;-(
+--- a/arch/m68k/coldfire/config.c
++++ b/arch/m68k/coldfire/config.c
+@@ -252,7 +252,7 @@ void __init coldfire_sched_init(irq_hand
+ 		     MCF_DTIM_DTMR_FRR	| MCF_DTIM_DTMR_RST_EN, \
+ 		     MCF_DTIM0_DTMR);
+ 
+-	request_irq(mcf_timervector, handler, SA_INTERRUPT, \
++	request_irq(mcf_timervector, handler, IRQF_DISABLED, \
+ 		    "timer", (void *)MCF_DTIM0_DTMR);
+ 
+ 	settimericr(1, mcf_timerlevel);
+--- a/arch/m68k/coldfire/iomap.c
++++ b/arch/m68k/coldfire/iomap.c
+@@ -12,6 +12,7 @@
+ #include <linux/pci.h>
+ #include <asm/io.h>
+ 
++#if 0
+ void __iomem *__attribute__ ((weak))
+ ioport_map(unsigned long port, unsigned int len)
+ {
+@@ -52,3 +53,4 @@ void pci_iounmap(struct pci_dev *dev, vo
+ 	/* Nothing .. */
+ }
+ EXPORT_SYMBOL(ioport_unmap);
++#endif
+--- a/arch/m68k/coldfire/mcf5445x-devices.c
++++ b/arch/m68k/coldfire/mcf5445x-devices.c
+@@ -75,10 +75,19 @@ static int ata_get_clk_rate(void)
+ 	return MCF_BUSCLK;
+ }
+ 
++/* JKM -- move these to a header file */
++#define MCF_IDE_DMA_WATERMARK	32	/* DMA watermark level in bytes */
++#define MCF_IDE_DMA_BD_NR	(512/3/4) /* number of BDs per channel */
++
+ static struct fsl_ata_platform_data ata_data = {
+ 	.init             = ata_init,
+ 	.exit             = ata_exit,
+ 	.get_clk_rate     = ata_get_clk_rate,
++#ifdef CONFIG_PATA_FSL_USE_DMA
++        .udma_mask        = 0x0F, /* the board handles up to UDMA3 */
++        .fifo_alarm       = MCF_IDE_DMA_WATERMARK / 2,
++        .max_sg           = MCF_IDE_DMA_BD_NR,
++#endif
+ };
+ 
+ static struct resource pata_fsl_resources[] = {
+--- a/arch/m68k/coldfire/mcf5445x-pci.c
++++ b/arch/m68k/coldfire/mcf5445x-pci.c
+@@ -8,6 +8,7 @@
+  */
+ 
+ #include <linux/delay.h>
++#include <linux/interrupt.h>
+ #include <linux/pci.h>
+ 
+ #include <asm/mcfsim.h>
+@@ -76,7 +77,7 @@ void mcf5445x_pci_dumpregs(void);
+ #endif
+ 
+ /*
+- * static void mcf5445x_conf_device(struct pci_dev *dev)
++ * mcf5445x_conf_device(struct pci_dev *dev)
+  *
+  * Machine dependent Configure the given device.
+  *
+@@ -84,7 +85,7 @@ void mcf5445x_pci_dumpregs(void);
+  *
+  * dev		- the pci device.
+  */
+-void __init
++void
+ mcf5445x_conf_device(struct pci_dev *dev)
+ {
+ 	set_fpga(FPGA_PCI_IRQ_ENABLE, 0x0f);
+--- a/arch/m68k/coldfire/pci.c
++++ b/arch/m68k/coldfire/pci.c
+@@ -56,7 +56,7 @@ struct pci_ops pci_root_ops = {
+  *
+  * Initialize the pcibios based on cmd line params.
+  */
+-char * __init
++char *
+ pcibios_setup(char *str)
+ {
+ 	if (!strcmp(str, "debug")) {
+@@ -124,7 +124,7 @@ pcibios_map_irq(struct pci_dev *dev, u8 
+  *
+  * Update a PCI interrupt.
+  */
+-void __init
++void
+ pcibios_update_irq(struct pci_dev *dev, int irq)
+ {
+ 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+@@ -171,7 +171,7 @@ pcibios_enable_device(struct pci_dev *de
+ /*
+  * pcibios_fixup_bus(struct pci_bus *bus)
+  */
+-void __init
++void
+ pcibios_fixup_bus(struct pci_bus *bus)
+ {
+ 	struct pci_dev *dev = bus->self;
+--- a/arch/m68k/kernel/Makefile
++++ b/arch/m68k/kernel/Makefile
+@@ -9,6 +9,7 @@ else
+ ifndef CONFIG_COLDFIRE
+   extra-y := head.o vmlinux.lds
+   obj-y := entry.o signal.o traps.o ints.o
++  obj-$(CONFIG_PCI) += bios32.o
+ else   # CONFIG_COLDFIRE
+   extra-y := ../coldfire/head.o vmlinux.lds
+ endif
+@@ -19,7 +20,6 @@ obj-y	+= process.o ptrace.o module.o \
+ 
+ devres-y = ../../../kernel/irq/devres.o
+ 
+-obj-$(CONFIG_PCI)	+= bios32.o
+ obj-y$(CONFIG_MMU_SUN3) += dma.o	# no, it's not a typo
+ 
+ EXTRA_AFLAGS := -traditional
+--- a/drivers/macintosh/Kconfig
++++ b/drivers/macintosh/Kconfig
+@@ -118,7 +118,6 @@ config PMAC_SMU
+ 
+ config PMAC_APM_EMU
+ 	tristate "APM emulation"
+-	select APM_EMULATION
+ 	depends on ADB_PMU && PM && PPC32
+ 
+ config PMAC_MEDIABAY
+--- a/drivers/pci/Makefile
++++ b/drivers/pci/Makefile
+@@ -39,6 +39,7 @@ obj-$(CONFIG_PPC) += setup-bus.o
+ obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
+ obj-$(CONFIG_X86_VISWS) += setup-irq.o
+ obj-$(CONFIG_MN10300) += setup-bus.o
++obj-$(CONFIG_M54455) += setup-bus.o setup-irq.o
+ 
+ #
+ # ACPI Related PCI FW Functions
+--- a/include/asm-m68k/io.h
++++ b/include/asm-m68k/io.h
+@@ -306,7 +306,18 @@ static inline void isa_delay(void)
+ #define outw(val,port) out_le16((port),(val))
+ #define inl(port)      in_le32(port)
+ #define outl(val,port) out_le32((port),(val))
+-
++#define insb(port, buf, nr)	\
++		raw_insb((u8 *)(port), (u8 *)(buf), (nr))
++#define outsb(port, buf, nr)	\
++		raw_outsb((u8 *)(port), (u8 *)(buf), (nr))
++#define insw(port, buf, nr)	\
++		raw_insw_swapw((u16 *)(port), (u16 *)(buf), (nr))
++#define outsw(port, buf, nr)	\
++		raw_outsw_swapw((u16 *)(port), (u16 *)(buf), (nr))
++#define insl(port, buf, nr)	\
++		raw_insw_swapw((u16 *)(port), (u16 *)(buf), (nr)<<1)
++#define outsl(port, buf, nr)	\
++		raw_outsw_swapw((u16 *)(port), (u16 *)(buf), (nr)<<1)
+ #else
+ /*
+  * kernel with both ISA and PCI compiled in, those have
+--- a/include/asm-m68k/pci.h
++++ b/include/asm-m68k/pci.h
+@@ -42,11 +42,13 @@ pcibios_penalize_isa_irq(int irq, int ac
+ 	/* no dynamic PCI IRQ allocation */
+ }
+ 
++#if 0
+ static inline void
+ pcibios_add_platform_entries(struct pci_dev *dev)
+ {
+ 	/* no special handling */
+ }
++#endif
+ 
+ static inline void
+ pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
diff --git a/target/linux/coldfire/patches/037-m5445x_edma_callback.patch b/target/linux/coldfire/patches/037-m5445x_edma_callback.patch
new file mode 100644
index 0000000000..af2705c63b
--- /dev/null
+++ b/target/linux/coldfire/patches/037-m5445x_edma_callback.patch
@@ -0,0 +1,90 @@
+From acd937ac924aefd22ea9a66ea621ab80a4f9b594 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Mon, 10 Dec 2007 03:37:19 -0700
+Subject: [PATCH] Update EDMA driver to allow callback/arg changes.
+
+LTIBName: m5445x-edma-callback
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/spi/coldfire_edma.c      |   27 +++++++++++++++++++++++++++
+ include/asm-m68k/coldfire_edma.h |   20 ++++++++++++++++++++
+ 2 files changed, 47 insertions(+), 0 deletions(-)
+
+--- a/drivers/spi/coldfire_edma.c
++++ b/drivers/spi/coldfire_edma.c
+@@ -206,6 +206,31 @@ int request_edma_channel(int channel,
+ EXPORT_SYMBOL(request_edma_channel);
+ 
+ /**
++ * set_edma_callback - Update the channel callback/arg
++ * @channel: channel number
++ * @handler: dma handler
++ * @error_handler: dma error handler
++ * @arg: argument to pass back
++ *
++ * Returns 0 if success or a negative value if failure
++ */
++int set_edma_callback(int channel,
++	edma_irq_handler handler,
++	edma_error_handler error_handler,
++	void *arg )
++{
++	if (devp!=NULL && channel>=0 && channel<=EDMA_CHANNELS &&
++	    devp->dma_interrupt_handlers[channel].allocated) {
++		devp->dma_interrupt_handlers[channel].irq_handler = handler;
++		devp->dma_interrupt_handlers[channel].error_handler = error_handler;
++		devp->dma_interrupt_handlers[channel].arg = arg;
++		return 0;
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(set_edma_callback);
++
++/**
+  * free_edma_channel - Free the edma channel
+  * @channel: channel number
+  * @arg: argument created with
+@@ -216,8 +241,10 @@ int free_edma_channel(int channel, void 
+ {
+ 	if (devp!=NULL && channel>=0 && channel<=EDMA_CHANNELS) {
+ 		if (devp->dma_interrupt_handlers[channel].allocated) {
++#if 0
+ 			if (devp->dma_interrupt_handlers[channel].arg != arg)
+ 				return -EBUSY;
++#endif
+ 
+ 			devp->dma_interrupt_handlers[channel].allocated = 0;
+ 			devp->dma_interrupt_handlers[channel].arg = NULL;
+--- a/include/asm-m68k/coldfire_edma.h
++++ b/include/asm-m68k/coldfire_edma.h
+@@ -96,10 +96,30 @@ int request_edma_channel(int channel,
+ 		void *dev,
+ 		spinlock_t *lock,
+ 		const char *device_id);
++
++/**
++ * set_edma_callback - Update the channel callback/arg
++ * @channel: channel number
++ * @handler: dma handler
++ * @error_handler: dma error handler
++ * @arg: argument to pass back
++ *
++ * Returns 0 if success or a negative value if failure
++ */
++int set_edma_callback(int channel,
++		edma_irq_handler handler,
++		edma_error_handler error_handler,
++		void *arg);
+   
+ /* Free eDMA channel
+  *  channel - eDMA TCD number
+  *  dev - device
+  */
+ int free_edma_channel(int channel, void *dev);
++
++/*
++ * DMA Modes
++ */
++#define	DMA_MODE_READ		0
++#define DMA_MODE_WRITE		1
+ #endif
diff --git a/target/linux/coldfire/patches/038-m5445x_audio_rates.patch b/target/linux/coldfire/patches/038-m5445x_audio_rates.patch
new file mode 100644
index 0000000000..09e47c4142
--- /dev/null
+++ b/target/linux/coldfire/patches/038-m5445x_audio_rates.patch
@@ -0,0 +1,77 @@
+From de5f4660856350ac43f642bb7c5adf063fc68287 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Mon, 10 Dec 2007 13:15:33 -0700
+Subject: [PATCH] Fix to allow playback at other than 44.1.
+
+LTIBName: m5445x-audio-rates
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/spi/ssi_audio.c |   34 ++++++++++++++++++++++++----------
+ 1 files changed, 24 insertions(+), 10 deletions(-)
+
+--- a/drivers/spi/ssi_audio.c
++++ b/drivers/spi/ssi_audio.c
+@@ -34,7 +34,6 @@
+ #define SOUND_DEVICE_NAME "sound"
+ #define DRIVER_NAME "ssi_audio"
+ 
+-
+ /* #define AUDIO_DEBUG */
+ 
+ #ifdef CONFIG_MMU
+@@ -315,24 +314,36 @@ static inline void disable_ssi(void)
+ }
+ 
+ /* Audio CODEC initialization */
+-/* TODO: also the SSI frequency/dividers must be adjusted */
+ static void adjust_codec_speed(void) {
+ #ifdef AUDIO_DEBUG
+ 	printk(DRIVER_NAME ":adjust_codec_speed: %d\n", audio_device->speed);
+ #endif
+-
+-	if (audio_device->speed == 8000) {
++	disable_ssi();
++	switch (audio_device->speed) {
++	case 8000:
++		MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(255);
+ 		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_8KHZ);
+-	} else if (audio_device->speed == 16000) {
++		break;
++	case 16000:
++		MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(129);
+ 		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_16KHZ);
+-	} else if (audio_device->speed == 22000) {
++		break;
++	case 22000:
++	case 22050:
++		MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(94);
+ 		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_22KHZ);
+-	} else if (audio_device->speed == 44000 || audio_device->speed == 44100) {
++		break;
++	case 44000:
++	case 44100:
++		MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(47);
+ 		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_44KHZ);
+-	} else if (audio_device->speed == 48000) {
++		break;
++	case 48000:
++		MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(42);
+ 		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_48KHZ);
+-	} else {
+-		/* default 44KHz */
++		break;
++	default:
++		MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(47);
+ 		codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_44KHZ);
+ 	}
+ }
+@@ -712,6 +723,9 @@ static int ssi_audio_ioctl(struct inode 
+ 	case SNDCTL_DSP_SAMPLESIZE:
+ 		if (access_ok(VERIFY_READ, (void *) arg, sizeof(val))) {
+ 			get_user(val, (unsigned long *) arg);
++#ifdef AUDIO_DEBUG
++			printk(DRIVER_NAME ":ssi_audio_ioctl: SNDCTL_DSP_SAMPLESIZE: %d\n", val);
++#endif
+ 			ssi_audio_txdrain();
+ 			ssi_audio_setsamplesize(val);
+ 		} else {
diff --git a/target/linux/coldfire/patches/039-mcfv4e_kbuild_flags_update.patch b/target/linux/coldfire/patches/039-mcfv4e_kbuild_flags_update.patch
new file mode 100644
index 0000000000..e560749569
--- /dev/null
+++ b/target/linux/coldfire/patches/039-mcfv4e_kbuild_flags_update.patch
@@ -0,0 +1,32 @@
+From ea71d637a9d8606624056fad67d050face9fc03c Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Fri, 15 Feb 2008 15:32:35 -0700
+Subject: [PATCH] Update to use KBUILD_ for CFLAGS and AFLAGS.
+
+LTIBName: mcfv4e-kbuild-flags-update
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/Makefile |    5 +++--
+ 1 files changed, 3 insertions(+), 2 deletions(-)
+
+--- a/arch/m68k/Makefile
++++ b/arch/m68k/Makefile
+@@ -33,6 +33,7 @@ LDFLAGS_vmlinux = -N
+ endif
+ 
+ ifdef CONFIG_COLDFIRE
++# OBJCOPYFLAGS    := -R .note -R .note.gnu.build-id -R .comment -S
+ # LDFLAGS_vmlinux = --verbose
+ endif
+ 
+@@ -59,8 +60,8 @@ endif
+ endif
+ 
+ ifdef CONFIG_M54455
+-CFLAGS := $(CFLAGS) -march=isac -mcpu=54455 -msoft-float -g 
+-AFLAGS := $(AFLAGS) -march=isac -mcpu=54455 -msoft-float  
++KBUILD_CFLAGS += -march=isac -mcpu=54455 -msoft-float -g
++KBUILD_AFLAGS += -march=isac -mcpu=54455 -msoft-float  
+ endif
+ 
+ ifdef CONFIG_KGDB
diff --git a/target/linux/coldfire/patches/040-m5445x_usb_header_move.patch b/target/linux/coldfire/patches/040-m5445x_usb_header_move.patch
new file mode 100644
index 0000000000..a131d56def
--- /dev/null
+++ b/target/linux/coldfire/patches/040-m5445x_usb_header_move.patch
@@ -0,0 +1,22 @@
+From 9d8ff9acf372506a60b2e54964d230e0a5a95eb1 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Fri, 15 Feb 2008 15:33:23 -0700
+Subject: [PATCH] Change linux/usb_gadget.h to linux/usb/gadget.h
+
+LTIBName: m5445x-usb-header-move
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/usb/gadget/mcf5445x_udc.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+--- a/drivers/usb/gadget/mcf5445x_udc.c
++++ b/drivers/usb/gadget/mcf5445x_udc.c
+@@ -57,7 +57,7 @@
+ #include <linux/moduleparam.h>
+ #include <linux/device.h>
+ #include <linux/usb/ch9.h>
+-#include <linux/usb_gadget.h>
++#include <linux/usb/gadget.h>
+ #include <linux/usb/otg.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/dmapool.h>
diff --git a/target/linux/coldfire/patches/041-mcfv4e_bitops_lock_hdr.patch b/target/linux/coldfire/patches/041-mcfv4e_bitops_lock_hdr.patch
new file mode 100644
index 0000000000..7117629b2b
--- /dev/null
+++ b/target/linux/coldfire/patches/041-mcfv4e_bitops_lock_hdr.patch
@@ -0,0 +1,21 @@
+From ff3d02768c1cbfbc1f0f07db4aef3d500101e4a7 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Fri, 15 Feb 2008 15:34:06 -0700
+Subject: [PATCH] Add generic lock header.
+
+LTIBName: mcfv4e-bitops-lock-hdr
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ include/asm-m68k/bitops.h |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+--- a/include/asm-m68k/bitops.h
++++ b/include/asm-m68k/bitops.h
+@@ -874,6 +874,7 @@ static  __inline__ int fls(int x)
+ #include <asm-generic/bitops/fls64.h>
+ #include <asm-generic/bitops/sched.h>
+ #include <asm-generic/bitops/hweight.h>
++#include <asm-generic/bitops/lock.h>
+ 
+ #define minix_find_first_zero_bit(addr, size)	find_next_zero_bit((addr), \
+ 							(size), 0)
diff --git a/target/linux/coldfire/patches/042-m5445x_pata_24_cleanup.patch b/target/linux/coldfire/patches/042-m5445x_pata_24_cleanup.patch
new file mode 100644
index 0000000000..0229987781
--- /dev/null
+++ b/target/linux/coldfire/patches/042-m5445x_pata_24_cleanup.patch
@@ -0,0 +1,49 @@
+From 329eae71bdbe9e30f76164ba3dd5ef0dba932eef Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Fri, 15 Feb 2008 15:34:58 -0700
+Subject: [PATCH] Remove .port_disable and .irq_ack for 2.6.24.
+
+LTIBName: m5445x-pata-24-cleanup
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/ata/pata_fsl.c |   15 ---------------
+ 1 files changed, 0 insertions(+), 15 deletions(-)
+
+--- a/drivers/ata/pata_fsl.c
++++ b/drivers/ata/pata_fsl.c
+@@ -497,19 +497,6 @@ err_out:
+ }
+ #endif /* CONFIG_FSL_PATA_USE_DMA */
+ 
+-static u8 pata_fsl_irq_ack(struct ata_port *ap, unsigned int chk_drq)
+-{
+-	unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
+-	u8 status;
+-
+-	status = ata_busy_wait(ap, bits, 1000);
+-	if (status & bits)
+-		if (ata_msg_err(ap))
+-			printk(KERN_ERR "abnormal status 0x%X\n", status);
+-
+-	return status;
+-}
+-
+ static void ata_dummy_noret(struct ata_port *ap) { return; }
+ 
+ static struct scsi_host_template pata_fsl_sht = {
+@@ -538,7 +525,6 @@ static struct ata_port_operations pata_f
+ 	.set_dmamode		= pata_fsl_set_dmamode,
+ #endif
+ 
+-	.port_disable		= ata_port_disable,
+ 	.tf_load		= ata_tf_load,
+ 	.tf_read		= ata_tf_read,
+ 	.check_status		= ata_check_status,
+@@ -563,7 +549,6 @@ static struct ata_port_operations pata_f
+ 
+ 	.irq_clear		= ata_dummy_noret,
+ 	.irq_on			= ata_irq_on,
+-	.irq_ack		= pata_fsl_irq_ack,
+ 
+ 	.port_start		= pata_fsl_port_start,
+ 
diff --git a/target/linux/coldfire/patches/043-m5445x_spi_cdev_remove.patch b/target/linux/coldfire/patches/043-m5445x_spi_cdev_remove.patch
new file mode 100644
index 0000000000..077f74d5a0
--- /dev/null
+++ b/target/linux/coldfire/patches/043-m5445x_spi_cdev_remove.patch
@@ -0,0 +1,31 @@
+From 13e26ba450f92bafe7dde67ad68779eeea65a53f Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Fri, 15 Feb 2008 15:36:04 -0700
+Subject: [PATCH] Remove cdev as the structure has changed for 2.6.24.
+
+LTIBName: m5445x-spi-cdev-remove
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/spi/spi_coldfire.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/spi/spi_coldfire.c
++++ b/drivers/spi/spi_coldfire.c
+@@ -1115,7 +1115,7 @@ static int init_queue(struct driver_data
+ 	INIT_WORK(&drv_data->pump_messages, pump_messages/*, drv_data*/);
+ 
+ 	drv_data->workqueue = create_singlethread_workqueue(
+-					drv_data->master->cdev.dev->bus_id);
++					drv_data->master->dev.parent->bus_id);
+ 	if (drv_data->workqueue == NULL)
+ 		return -EBUSY;
+ 
+@@ -1223,7 +1223,7 @@ static int coldfire_spi_probe(struct pla
+   	if (!master)
+  		return -ENOMEM;
+ 
+- 	drv_data = class_get_devdata(&master->cdev);
++ 	drv_data = spi_master_get_devdata(master);
+  	drv_data->master = master;
+ 
+ 	INIT_LIST_HEAD(&drv_data->queue);
diff --git a/target/linux/coldfire/patches/044-m547x_8x_initial.patch b/target/linux/coldfire/patches/044-m547x_8x_initial.patch
new file mode 100644
index 0000000000..e313a36381
--- /dev/null
+++ b/target/linux/coldfire/patches/044-m547x_8x_initial.patch
@@ -0,0 +1,3403 @@
+From 5b8edb0ea5cafb522e21b2973eaff6298062dd81 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 28 Feb 2008 10:56:17 -0700
+Subject: [PATCH] Initial M547x/M548x port.
+
+LTIBName: m547x-8x-initial
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/Kconfig                    |   84 ++++-
+ arch/m68k/Makefile                   |    4 +
+ arch/m68k/coldfire/config.c          |  112 +++++-
+ arch/m68k/coldfire/head.S            |  153 ++++++-
+ arch/m68k/coldfire/ints.c            |   78 ++++-
+ arch/m68k/configs/m5485evb_defconfig |  777 ++++++++++++++++++++++++++++++++++
+ drivers/serial/mcfserial.c           |   45 ++-
+ include/asm-m68k/cf_pgalloc.h        |    5 +
+ include/asm-m68k/cfcache.h           |   28 ++-
+ include/asm-m68k/coldfire.h          |    7 +
+ include/asm-m68k/m5485gpio.h         |  694 ++++++++++++++++++++++++++++++
+ include/asm-m68k/m5485gpt.h          |   88 ++++
+ include/asm-m68k/m5485psc.h          |  474 +++++++++++++++++++++
+ include/asm-m68k/m5485sim.h          |  219 ++++++++++
+ include/asm-m68k/mcfsim.h            |    5 +
+ include/asm-m68k/mcfuart.h           |   14 +
+ include/asm-m68k/mmu_context.h       |   72 ++++
+ include/asm-m68k/page_offset.h       |    5 +
+ 18 files changed, 2824 insertions(+), 40 deletions(-)
+ create mode 100644 arch/m68k/configs/m5485evb_defconfig
+ create mode 100644 include/asm-m68k/m5485gpio.h
+ create mode 100644 include/asm-m68k/m5485gpt.h
+ create mode 100644 include/asm-m68k/m5485psc.h
+ create mode 100644 include/asm-m68k/m5485sim.h
+
+--- a/arch/m68k/Kconfig
++++ b/arch/m68k/Kconfig
+@@ -56,7 +56,7 @@ config ARCH_MAY_HAVE_PC_FDC
+ 	default y
+ 
+ config NO_IOPORT
+-	def_bool !M54455
++	def_bool !(M54455 || M547X_8X)
+ 
+ config NO_DMA
+ 	def_bool SUN3
+@@ -319,20 +319,80 @@ config M68060
+ config M54455
+ 	bool "MCF54455 support"
+ 	depends on COLDFIRE
+-	default y
+ 	help
+           This option will add support for the MCF54455 processor with mmu.
+ 
++config M547X_8X
++	bool "MCF547x/MCF548x support"
++	depends on COLDFIRE
++	help
++          This option will add support for the MCF547x/MCF548x processor with mmu.
++
++config M547X
++	bool
++	depends on M547X_8X
++	default n
++
++config M548X
++	bool
++	depends on M547X_8X
++	default n
++
++choice
++	prompt "Model"
++	depends on M547X_8X
++	default M5485CFE
++	config M5475AFE
++		bool "MCF5475AFE"
++		select M547X
++	config M5475BFE
++		bool "MCF5475BFE"
++		select M547X
++	config M5475CFE
++		bool "MCF5475CFE"
++		select M547X
++	config M5475DFE
++		bool "MCF5475DFE"
++		select M547X
++	config M5475EFE
++		bool "MCF5475EFE"
++		select M547X
++	config M5475FFE
++		bool "MCF5475FFE"
++		select M547X
++
++	config M5485AFE
++		bool "MCF5485AFE"
++		select M548X
++	config M5485BFE
++		bool "MCF5485BFE"
++		select M548X
++	config M5485CFE
++		bool "MCF5485CFE"
++		select M548X
++	config M5485DFE
++		bool "MCF5485DFE"
++		select M548X
++	config M5485EFE
++		bool "MCF5485EFE"
++		select M548X
++	config M5485FFE
++		bool "MCF5485FFE"
++		select M548X
++
++endchoice
++
+ config MCFCLK
+-	int "M54455EVB System Clock"
+-	depends on M54455
+-	default 266666666
++	int
++	default 266666666 if M54455
++	default 266000000 if M547X
++	default 200000000 if M548X
+ 	help
+-	  System clock for EVB.  Usually 266MHz for u-boot and 200MHz for dBUG.
++	  Coldfire System clock.
+ 
+ config MCF_USER_HALT
+ 	bool "Coldfire User Halt Enable"
+-	depends on M54455
++	depends on M54455 || M547X_8X
+ 	default n
+ 	help
+ 	  Enables the HALT instruction in User Mode.
+@@ -350,13 +410,15 @@ config MMU_CFV4E
+ 
+ config SDRAM_BASE
+ 	hex
+-	depends on M54455
+-	default 0x40000000
++	depends on COLDFIRE
++	default 0x40000000 if M54455
++	default 0x00000000 if M547X_8X
+ 
+ config SDRAM_SIZE
+ 	hex
+-	depends on M54455
+-	default 0x0FFFFFFF
++	depends on COLDFIRE
++	default 0x0FFFFFFF if M54455
++	default 0x04000000 if M547X_8X
+ 
+ config NOR_FLASH_BASE
+ 	hex "NOR Flash Base Address"
+--- a/arch/m68k/Makefile
++++ b/arch/m68k/Makefile
+@@ -63,6 +63,10 @@ ifdef CONFIG_M54455
+ KBUILD_CFLAGS += -march=isac -mcpu=54455 -msoft-float -g
+ KBUILD_AFLAGS += -march=isac -mcpu=54455 -msoft-float  
+ endif
++ifdef CONFIG_M547X_8X
++KBUILD_CFLAGS += -mcfv4e -g
++KBUILD_AFLAGS += -mcfv4e
++endif
+ 
+ ifdef CONFIG_KGDB
+ # If configured for kgdb support, include debugging infos and keep the
+--- a/arch/m68k/coldfire/config.c
++++ b/arch/m68k/coldfire/config.c
+@@ -1,8 +1,9 @@
+ /*
+- *  linux/arch/m68k/coldifre/config.c
++ *  linux/arch/m68k/coldfire/config.c
+  *
++ *  Kurt Mahan kmahan@freescale.com
+  *  Matt Waddel Matt.Waddel@freescale.com
+- *  Copyright Freescale Semiconductor, Inc. 2007
++ *  Copyright Freescale Semiconductor, Inc. 2007, 2008
+  *
+  *  This program is free software; you can redistribute it and/or modify
+  *  it under the terms of the GNU General Public License as published by
+@@ -32,11 +33,16 @@
+ #include <asm/movs.h>
+ #include <asm/page.h>
+ #include <asm/pgalloc.h>
++
++#include <asm/mcfsim.h>
++
++#if 0
+ #include <asm/mcf5445x_intc.h>
+ #include <asm/mcf5445x_sdramc.h>
+ #include <asm/mcf5445x_fbcs.h>
+ #include <asm/mcf5445x_dtim.h>
+ #include <asm/mcf5445x_xbs.h>
++#endif
+ 
+ /* JKM -- testing */
+ #include <linux/pfn.h>
+@@ -85,15 +91,21 @@ int __init uboot_commandline(char *boota
+ {
+ 	int len = 0, cmd_line_len;
+ 	static struct uboot_record uboot_info;
++	u32 offset = PAGE_OFFSET_RAW - PHYS_OFFSET;
+ 
+ 	extern unsigned long uboot_info_stk;
+ 
+-	/* Add 0x80000000 to get post-remapped kernel memory location */
+-	uboot_info.bd_info = (*(u32 *)(uboot_info_stk)) + 0x80000000;
+-	uboot_info.initrd_start = (*(u32 *)(uboot_info_stk+4)) + 0x80000000;
+-	uboot_info.initrd_end = (*(u32 *)(uboot_info_stk+8)) + 0x80000000;
+-	uboot_info.cmd_line_start = (*(u32 *)(uboot_info_stk+12)) + 0x80000000;
+-	uboot_info.cmd_line_stop = (*(u32 *)(uboot_info_stk+16)) + 0x80000000;
++	/* validate address */
++	if ((uboot_info_stk < PAGE_OFFSET_RAW) ||
++	    (uboot_info_stk >= (PAGE_OFFSET_RAW + CONFIG_SDRAM_SIZE)))
++		return 0;
++
++	/* Add offset to get post-remapped kernel memory location */
++	uboot_info.bd_info = (*(u32 *)(uboot_info_stk)) + offset;
++	uboot_info.initrd_start = (*(u32 *)(uboot_info_stk+4)) + offset;
++	uboot_info.initrd_end = (*(u32 *)(uboot_info_stk+8)) + offset;
++	uboot_info.cmd_line_start = (*(u32 *)(uboot_info_stk+12)) + offset;
++	uboot_info.cmd_line_stop = (*(u32 *)(uboot_info_stk+16)) + offset;
+ 
+ 	cmd_line_len = uboot_info.cmd_line_stop - uboot_info.cmd_line_start;
+ 	if ((cmd_line_len > 0) && (cmd_line_len < CL_SIZE-1))
+@@ -106,21 +118,36 @@ int __init uboot_commandline(char *boota
+ /*
+  * This routine does things not done in the bootloader.
+  */
++#if defined(CONFIG_M54455)
+ #define DEFAULT_COMMAND_LINE "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
++#elif defined(CONFIG_M547X_8X)
++#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs nfsroot=172.27.155.1:/tftpboot/rigo/rootfs/ ip=172.27.155.85:172.27.155.1"
++#endif
+ asmlinkage void __init cf_early_init(void)
+ {
+ 	struct bi_record *record = (struct bi_record *) &_end;
+ 
+ 	extern char _end;
+ 
++#if defined(CONFIG_M54455)
+ 	SET_VBR((void *)MCF_RAMBAR1);
++#elif defined(CONFIG_M547X_8X)
++	SET_VBR((void *)MCF_RAMBAR0);
++#endif
+ 
+ 	/* Mask all interrupts */
++#if defined(CONFIG_M54455)
+ 	MCF_INTC0_IMRL = 0xFFFFFFFF;
+ 	MCF_INTC0_IMRH = 0xFFFFFFFF;
+ 	MCF_INTC1_IMRL = 0xFFFFFFFF;
+ 	MCF_INTC1_IMRH = 0xFFFFFFFF;
++#elif defined(CONFIG_M547X_8X)
++/* JKM -- ?? */
++	MCF_IMRL = 0xFFFFFFFF;
++	MCF_IMRH = 0xFFFFFFFF;
++#endif
+ 
++#if defined(CONFIG_M54455)
+ #if defined(CONFIG_NOR_FLASH_BASE)
+ 	MCF_FBCS_CSAR(1) = CONFIG_NOR_FLASH_BASE;
+ #else
+@@ -131,9 +158,10 @@ asmlinkage void __init cf_early_init(voi
+ 	/* Init optional SDRAM chip select */
+ 	MCF_SDRAMC_SDCS(1) = (256*1024*1024) | 0x1B;
+ #endif
++#endif /* CONFIG_M54455 */
+ 
++#if defined(CONFIG_M54455)
+ 	/* Setup SDRAM crossbar(XBS) priorities */
+-printk(KERN_INFO "Bumping USB Priority\n");
+ 	MCF_XBS_PRS2 = (MCF_XBS_PRS_M0(MCF_XBS_PRI_2) |
+ 			MCF_XBS_PRS_M1(MCF_XBS_PRI_3) |
+ 			MCF_XBS_PRS_M2(MCF_XBS_PRI_4) |
+@@ -141,6 +169,7 @@ printk(KERN_INFO "Bumping USB Priority\n
+ 			MCF_XBS_PRS_M5(MCF_XBS_PRI_6) |
+ 			MCF_XBS_PRS_M6(MCF_XBS_PRI_1) |
+ 			MCF_XBS_PRS_M7(MCF_XBS_PRI_7));
++#endif
+ 	
+ 
+ 	m68k_machtype = MACH_CFMMU;
+@@ -152,6 +181,7 @@ printk(KERN_INFO "Bumping USB Priority\n
+ 	m68k_memory[m68k_num_memory].addr = CONFIG_SDRAM_BASE;
+ 	m68k_memory[m68k_num_memory++].size = CONFIG_SDRAM_SIZE;
+ 
++#if defined(CONFIG_M54455)
+ 	if (!uboot_commandline(m68k_command_line)) {
+ #if defined(CONFIG_BOOTPARAM)
+ 		strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE-1);
+@@ -159,6 +189,10 @@ printk(KERN_INFO "Bumping USB Priority\n
+ 		strcpy(m68k_command_line, DEFAULT_COMMAND_LINE);
+ #endif
+ 	}
++#else
++/* JKM -- hack until mappings get resolved */
++	strcpy(m68k_command_line, DEFAULT_COMMAND_LINE);
++#endif
+ 
+ 
+ #if defined(CONFIG_BLK_DEV_INITRD)
+@@ -185,6 +219,7 @@ printk(KERN_INFO "Bumping USB Priority\n
+ 	cacr_set(CACHE_INITIAL_MODE);
+ }
+ 
++#if defined(CONFIG_M54455)
+ void settimericr(unsigned int timer, unsigned int level)
+ {
+ 	volatile unsigned char *icrp;
+@@ -202,6 +237,7 @@ void settimericr(unsigned int timer, uns
+ 		coldfire_enable_irq0(irq);
+ 	}
+ }
++#endif
+ 
+ /* Assembler routines */
+ asmlinkage void buserr(void);
+@@ -214,7 +250,11 @@ void __init coldfire_trap_init(void)
+ 	int i = 0;
+ 	e_vector *vectors;
+ 
++#if defined(CONFIG_M54455)
+ 	vectors = (e_vector *)MCF_RAMBAR1;
++#elif defined(CONFIG_M547X_8X)
++	vectors = (e_vector *)MCF_RAMBAR0;
++#endif
+ 	/*
+ 	 * There is a common trap handler and common interrupt
+ 	 * handler that handle almost every vector. We treat
+@@ -235,6 +275,8 @@ void __init coldfire_trap_init(void)
+ 	vectors[32] = system_call;
+ }
+ 
++#if defined(CONFIG_M54455)
++
+ void coldfire_tick(void)
+ {
+ 	/* Reset the ColdFire timer */
+@@ -285,13 +327,49 @@ unsigned long coldfire_gettimeoffset(voi
+ 	return offset;
+ }
+ 
++#elif defined(CONFIG_M547X_8X)
++
++void coldfire_tick(void)
++{
++	/* Reset the ColdFire timer */
++	MCF_SSR(0) = MCF_SSR_ST;
++}
++
++void __init coldfire_sched_init(irq_handler_t handler)
++{
++	int irq = ISC_SLTn(0);
++
++	MCF_SCR(0) = 0;
++	MCF_ICR(irq) = ILP_SLT0;
++	request_irq(64 + irq, handler, IRQF_DISABLED, "ColdFire Timer 0", NULL);
++	MCF_SLTCNT(0) = MCF_BUSCLK / HZ;
++	MCF_SCR(0) |=  MCF_SCR_TEN | MCF_SCR_IEN | MCF_SCR_RUN;
++}
++
++unsigned long coldfire_gettimeoffset(void)
++{
++	volatile unsigned long trr, tcn, offset;
++	trr = MCF_SLTCNT(0);
++	tcn = MCF_SCNT(0);
++
++	offset = (trr - tcn) * ((1000000 >> 3) / HZ) / (trr >> 3);
++	if (MCF_SSR(0) & MCF_SSR_ST)
++		offset += 1000000 / HZ;
++
++	return offset;
++}
++
++#endif
++
+ void coldfire_reboot(void)
+ {
++#if defined(CONFIG_M54455)
+ 	/* disable interrupts and do a software reset */
+ 	asm("movew #0x2700, %%sr\n\t"
+ 	    "moveb #0x80, %%d0\n\t"
+ 	    "moveb %%d0, 0xfc0a0000\n\t"
+ 	    : : : "%d0");
++#endif
+ }
+ 
+ /* int coldfire_hwclk(int i, struct rtc_time *t)
+@@ -305,6 +383,7 @@ static void coldfire_get_model(char *mod
+ 	sprintf(model, "Version 4 ColdFire");
+ }
+ 
++/* JKM -- Why do we need these? */
+ void coldfire_enable_irq(unsigned int vec)
+ {
+ 	unsigned long flags;
+@@ -318,13 +397,21 @@ void coldfire_enable_irq(unsigned int ve
+ 
+ 	local_irq_save(flags);
+ 	irq_enable[vec]++;
++#if defined(CONFIG_M54455)
+ 	if (vec < 32)
+ 		MCF_INTC0_IMRL &= ~(1 << vec);
+ 	else
+ 		MCF_INTC0_IMRH &= ~(1 << (vec - 32));
++#elif defined(CONFIG_M547X_8X)
++	if (vec < 32)
++		MCF_IMRL &= ~(1 << vec);
++	else
++		MCF_IMRH &= ~(1 << (vec - 32));
++#endif
+ 	local_irq_restore(flags);
+ }
+ 
++/* JKM -- Why do we need these? */
+ void coldfire_disable_irq(unsigned int vec)
+ {
+ 	unsigned long flags;
+@@ -338,10 +425,17 @@ void coldfire_disable_irq(unsigned int v
+ 
+ 	local_irq_save(flags);
+ 	if (--irq_enable[vec] == 0) {
++#if defined(CONFIG_M54455)
+ 		if (vec < 32)
+ 			MCF_INTC0_IMRL |= (1 << vec);
+ 		else
+ 			MCF_INTC0_IMRH |= (1 << (vec - 32));
++#elif defined(CONFIG_M547X_8X)
++		if (vec < 32)
++			MCF_IMRL |= (1 << vec);
++		else
++			MCF_IMRH |= (1 << (vec - 32));
++#endif
+ 
+ 	}
+ 	local_irq_restore(flags);
+--- a/arch/m68k/coldfire/head.S
++++ b/arch/m68k/coldfire/head.S
+@@ -2,9 +2,9 @@
+  *  head.S is the MMU enabled ColdFire specific initial boot code
+  *
+  *  Ported to ColdFire by
+- *  Matt Waddel Matt.Waddel@freescale.com
+- *  Kurt Mahan kmahan@freescale.com
+- *  Copyright Freescale Semiconductor, Inc. 2007
++ *    Matt Waddel Matt.Waddel@freescale.com
++ *    Kurt Mahan kmahan@freescale.com
++ *  Copyright Freescale Semiconductor, Inc. 2007, 2008
+  *
+  *  This program is free software; you can redistribute it and/or modify
+  *  it under the terms of the GNU General Public License as published by
+@@ -52,6 +52,7 @@
+ #define __FINIT		.previous
+ #endif
+ 
++/* JKM -- REVISE DOCS FOR RIGO */
+ /*
+  * Setup ACR mappings to provide the following memory map:
+  *   Data
+@@ -61,13 +62,20 @@
+  *     None currently (mapped via TLBs)
+  */
+ 
++#if defined(CONFIG_M54455)
+ #define ACR0_DEFAULT	#0xA00FA048   /* ACR0 default value */
+ #define ACR1_DEFAULT	#0xF00FA040   /* ACR1 default value */
+ #define ACR2_DEFAULT	#0x00000000   /* ACR2 default value */
+ #define ACR3_DEFAULT	#0x00000000   /* ACR3 default value */
+-
+ /* ACR mapping for FPGA (maps 0) */
+ #define ACR0_FPGA	#0x000FA048   /* ACR0 enable FPGA */
++#elif defined(CONFIG_M547X_8X)
++#define ACR0_DEFAULT	#0xE000C040   /* ACR0 default value */
++#define ACR1_DEFAULT	#0x00000000   /* ACR1 default value */
++#define ACR2_DEFAULT	#0x00000000   /* ACR2 default value */
++#define ACR3_DEFAULT	#0x00000000   /* ACR3 default value */
++#endif
++
+ 
+ /* Several macros to make the writing of subroutines easier:
+  * - func_start marks the beginning of the routine which setups the frame
+@@ -227,7 +235,7 @@ ENTRY(_stext)
+ 
+ 	.long	BOOTINFOV_MAGIC
+ 	.long	0
+-1:	jmp	__start-0x80000000
++1:	jmp	__start-(0xc0000000-CONFIG_SDRAM_BASE)
+ 
+ .equ	kernel_pg_dir,_stext
+ .equ	.,_stext+0x1000
+@@ -237,19 +245,40 @@ ENTRY(_start)
+ __INIT
+ ENTRY(__start)
+ 
++/* JKM -- make sure Rigo handles UBOOT */
+ /* Save the location of u-boot info - cmd line, bd_info, etc. */
+ 	movel	%a7,%a4		/* Don't use %a4 before cf_early_init */
++/* JKM -- fix to use CONFIG_SDRAM_BASE) */
++#if defined(CONFIG_M54455)
+ 	addl	#0x80000004,%a4	/* 0x80000004= 1 stack push + high mem offset */
++#elif defined(CONFIG_M547X_8X)
++	addl	#0xc0000004,%a4	/* 0x80000004= 1 stack push + high mem offset */
++#endif
+ 
++/* JKM -- fix this to work off of CONFIG_SDRAM_BASE */
+ /* Setup initial stack pointer */
++#if defined(CONFIG_M54455)
+ 	movel	#0x40001000,%sp	
++#elif defined(CONFIG_M547X_8X)
++	movel	#0x00001000,%sp	
++#endif
+ 
+ /* Setup usp */
+ 	subl	%a0,%a0
+ 	movel	%a0,%usp
+ 
++#if defined(CONFIG_M54455)
+ 	movel  #(MCF_RAMBAR1 + 0x221), %d0
+ 	movec   %d0, %rambar1
++#elif defined(CONFIG_M547X_8X)
++	movel   #MCF_MBAR, %d0
++	movec   %d0, %mbar
++	move.l  #(MCF_RAMBAR0 + 0x21), %d0
++	movec   %d0, %rambar0
++	move.l  #(MCF_RAMBAR1 + 0x21), %d0
++	movec   %d0, %rambar1
++#endif
++
+ 	movew	#0x2700,%sr
+ 
+ /* reset cache */
+@@ -278,6 +307,7 @@ ENTRY(__start)
+ 	/* If you change the memory size to another value make a matching 
+ 	   change in paging_init(cf-mmu.c) to zones_size[]. */
+ 
++#if defined(CONFIG_M54455)
+ 	/* Map 256MB as code */
+ 	mmu_map	(PAGE_OFFSET+0*0x1000000),  (PHYS_OFFSET+0*0x1000000), \
+ 		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
+@@ -383,16 +413,104 @@ ENTRY(__start)
+ 		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
+ 		0, MMUDR_LK, %d0
+ 
+-	/* Do unity mapping to enable the MMU.  Map first 16 MB in place as 
+-	   code (delete TLBs after MMU is enabled and we are executing in high 
+-	   memory). */
++#elif defined(CONFIG_M547X_8X)
++
++	/* Map first 8 MB as code */
++	mmu_map (PAGE_OFFSET+0*1024*1024),  (0*1024*1024), MMUOR_ITLB, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
++		MMUDR_LK, %d0
++	mmu_map (PAGE_OFFSET+1*1024*1024),  (1*1024*1024), MMUOR_ITLB, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
++		MMUDR_LK, %d0
++	mmu_map (PAGE_OFFSET+2*1024*1024),  (2*1024*1024), MMUOR_ITLB, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
++		MMUDR_LK, %d0
++	mmu_map (PAGE_OFFSET+3*1024*1024),  (3*1024*1024), MMUOR_ITLB, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
++		MMUDR_LK, %d0
++	mmu_map (PAGE_OFFSET+4*1024*1024),  (4*1024*1024), MMUOR_ITLB, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
++		MMUDR_LK, %d0
++	mmu_map (PAGE_OFFSET+5*1024*1024),  (5*1024*1024), MMUOR_ITLB, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
++		MMUDR_LK, %d0
++	mmu_map (PAGE_OFFSET+6*1024*1024),  (6*1024*1024), MMUOR_ITLB, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
++		MMUDR_LK, %d0
++	mmu_map (PAGE_OFFSET+7*1024*1024),  (7*1024*1024), MMUOR_ITLB, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, MMUDR_X, \
++		MMUDR_LK, %d0
++
++	/* Map first 8 MB as data */
++	mmu_map (PAGE_OFFSET+0*1024*1024),  (0*1024*1024), 0, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
++		MMUDR_W, 0, MMUDR_LK, %d0
++	mmu_map (PAGE_OFFSET+1*1024*1024),  (1*1024*1024), 0, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
++		MMUDR_W, 0, MMUDR_LK, %d0
++	mmu_map (PAGE_OFFSET+2*1024*1024),  (2*1024*1024), 0, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
++		MMUDR_W, 0, MMUDR_LK, %d0
++	mmu_map (PAGE_OFFSET+3*1024*1024),  (3*1024*1024), 0, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
++		MMUDR_W, 0, MMUDR_LK, %d0
++	mmu_map (PAGE_OFFSET+4*1024*1024),  (4*1024*1024), 0, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
++		MMUDR_W, 0, MMUDR_LK, %d0
++	mmu_map (PAGE_OFFSET+5*1024*1024),  (5*1024*1024), 0, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
++		MMUDR_W, 0, MMUDR_LK, %d0
++	mmu_map (PAGE_OFFSET+6*1024*1024),  (6*1024*1024), 0, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
++		MMUDR_W, 0, MMUDR_LK, %d0
++	mmu_map (PAGE_OFFSET+7*1024*1024),  (7*1024*1024), 0, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \
++		MMUDR_W, 0, MMUDR_LK, %d0
++#endif
++	/*
++	 * Do unity mapping to enable the MMU.  Map first chunk of memory
++	 * in place as code/data.  The TLBs will be deleted after the MMU is
++	 * enabled and we are executing in high memory.
++	 */
++
++#if defined(CONFIG_M54455)
++	/* Map first 16 MB as code */
+ 	mmu_map	(PHYS_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), \
+ 		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_INC,  MMUDR_SP, 0, \
+ 		0, MMUDR_X, 0, %d0
+-	/* Map first 16 MB as data too.  */
++	/* Map first 16 MB as data too  */
+ 	mmu_map	(PHYS_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), 0, 0, \
+ 		MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \
+ 		0, 0, %d0
++#elif defined(CONFIG_M547X_8X)
++	/* Map first 4 MB as code */
++	mmu_map (0*1024*1024), (0*1024*1024), MMUOR_ITLB, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, \
++		MMUDR_X, 0, %d0
++	mmu_map (1*1024*1024), (1*1024*1024), MMUOR_ITLB, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, \
++		MMUDR_X, 0, %d0
++	mmu_map (2*1024*1024), (2*1024*1024), MMUOR_ITLB, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, \
++		MMUDR_X, 0, %d0
++	mmu_map (3*1024*1024), (3*1024*1024), MMUOR_ITLB, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_IC,  MMUDR_SP, 0, 0, \
++		MMUDR_X, 0, %d0
++
++	/* Map first 4 MB as data too */
++	mmu_map (0*1024*1024), (0*1024*1024), 0, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \
++		MMUDR_W, 0, 0, %d0
++	mmu_map (1*1024*1024), (1*1024*1024), 0, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \
++		MMUDR_W, 0, 0, %d0
++	mmu_map (2*1024*1024), (2*1024*1024), 0, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \
++		MMUDR_W, 0, 0, %d0
++	mmu_map (3*1024*1024), (3*1024*1024), 0, 0, \
++		MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \
++		MMUDR_W, 0, 0, %d0
++#endif
+ 
+ 	/* Turn on MMU */
+ 	movel	#(MMUCR_EN),%a0
+@@ -412,9 +530,20 @@ ENTRY(__running_high)
+ 	addl	#PAGE_OFFSET,%a1
+ 	movel	%a1,%a0@
+ 
+-	/* Unmap first 16 MB, code and data.  */
++	/* Unmap unity mappings */
++#if defined(CONFIG_M54455)
+ 	mmu_unmap (PHYS_OFFSET+0*0x1000000), MMUOR_ITLB, %d0
+ 	mmu_unmap (PHYS_OFFSET+0*0x1000000), 0, %d0
++#elif defined(CONFIG_M547X_8X)
++	mmu_unmap (PHYS_OFFSET+0*0x1000000), MMUOR_ITLB, %d0
++	mmu_unmap (PHYS_OFFSET+1*0x1000000), MMUOR_ITLB, %d0
++	mmu_unmap (PHYS_OFFSET+2*0x1000000), MMUOR_ITLB, %d0
++	mmu_unmap (PHYS_OFFSET+3*0x1000000), MMUOR_ITLB, %d0
++	mmu_unmap (PHYS_OFFSET+0*0x1000000), 0, %d0
++	mmu_unmap (PHYS_OFFSET+1*0x1000000), 0, %d0
++	mmu_unmap (PHYS_OFFSET+2*0x1000000), 0, %d0
++	mmu_unmap (PHYS_OFFSET+3*0x1000000), 0, %d0
++#endif
+ 
+ /* Setup initial stack pointer */
+ 	lea	init_task,%a2 
+@@ -438,8 +567,9 @@ func_start	set_context,%d0,(1*4)
+ 	movec	%d0,%asid
+ func_return	set_context
+ 
++#ifdef CONFIG_M54455
+ /*
+- * set_fpga(addr,val)
++ * set_fpga(addr,val) on the M54455EVB
+  *
+  * Map in 0x00000000 -> 0x0fffffff and then do the write.
+  */
+@@ -456,6 +586,7 @@ set_fpga:
+ 	nop
+ 	movew	%d1,%sr
+ 	rts
++#endif
+ 
+ 	.data
+ 	.align	4
+--- a/arch/m68k/coldfire/ints.c
++++ b/arch/m68k/coldfire/ints.c
+@@ -5,9 +5,10 @@
+  * Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
+  *                     Kenneth Albanowski <kjahds@kjahds.com>,
+  * Copyright (C) 2000  Lineo Inc. (www.lineo.com)
+- * Matt Waddel Matt.Waddel@freescale.com
+- * Copyright Freescale Semiconductor, Inc. 2007
+- * Kurt Mahan kmahan@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007, 2008
++ * 	Kurt Mahan kmahan@freescale.com
++ * 	Matt Waddel Matt.Waddel@freescale.com
+  *
+  * Based on:
+  * linux/arch/m68k/kernel/ints.c &
+@@ -46,7 +47,7 @@ static int irq_depth[SYS_IRQS];
+ /*
+  * IRQ Controller
+  */
+-#ifdef CONFIG_M54455
++#if defined(CONFIG_M54455)
+ void m5445x_irq_enable(unsigned int irq);
+ void m5445x_irq_disable(unsigned int irq);
+ static struct irq_controller m5445x_irq_controller = {
+@@ -55,6 +56,17 @@ static struct irq_controller m5445x_irq_
+ 	.enable		= m5445x_irq_enable,
+ 	.disable	= m5445x_irq_disable,
+ };
++#elif defined(CONFIG_M547X_8X)
++void m547x_8x_irq_enable(unsigned int irq);
++void m547x_8x_irq_disable(unsigned int irq);
++static struct irq_controller m547x_8x_irq_controller = {
++	.name		= "M547X_8X",
++	.lock		= SPIN_LOCK_UNLOCKED,
++	.enable		= m547x_8x_irq_enable,
++	.disable	= m547x_8x_irq_disable,
++};
++#else
++# error No IRQ controller defined
+ #endif
+ 
+ #define	POOL_SIZE 	SYS_IRQS
+@@ -75,9 +87,12 @@ void __init init_IRQ(void)
+ {
+ 	int i;
+ 
+-#ifdef CONFIG_M54455
++#if defined(CONFIG_M54455)
+ 	for (i = 0; i < SYS_IRQS; i++)
+ 		irq_controller[i] = &m5445x_irq_controller;
++#elif defined(CONFIG_M547X_8X)
++	for (i = 0; i < SYS_IRQS; i++)
++		irq_controller[i] = &m547x_8x_irq_controller;
+ #endif
+ }
+ 
+@@ -381,4 +396,57 @@ void m5445x_irq_disable(unsigned int irq
+ 		MCF_INTC1_SIMR = irq;
+ 	}
+ }
++#elif defined(CONFIG_M547X_8X)
++/*
++ * M547X_8X Implementation
++ */
++void m547x_8x_irq_enable(unsigned int irq)
++{
++	/* enable the interrupt hardware */
++	if (irq < 64)
++		return;
++
++	/* adjust past non-hardware ints */
++	irq -= 64;
++
++/* JKM -- re-add EPORT later */
++#if 0
++	/* check for eport */
++	if ((irq > 0) && (irq < 8)) {
++		/* enable eport */
++		MCF_EPORT_EPPAR &= ~(3 << (irq*2));	/* level */
++		MCF_EPORT_EPDDR &= ~(1 << irq);		/* input */
++		MCF_EPORT_EPIER |= 1 << irq;		/* irq enabled */
++	}
++#endif
++
++	if (irq < 32)
++		MCF_IMRL &= ~(1 << irq);
++	else
++		MCF_IMRH &= ~(1 << (irq - 32));
++}
++
++void m547x_8x_irq_disable(unsigned int irq)
++{
++	/* disable the interrupt hardware */
++	if (irq < 64)
++		return;
++
++	/* adjust past non-hardware ints */
++	irq -= 64;
++
++/* JKM -- re-add EPORT later */
++#if 0
++	/* check for eport */
++	if ((irq > 0) && (irq < 8)) {
++		/* disable eport */
++		MCF_EPORT_EPIER &= ~(1 << irq);
++	}
++#endif
++
++	if (irq < 32)
++		MCF_IMRL |= (1 << irq);
++	else
++		MCF_IMRH |= (1 << (irq - 32));
++}
+ #endif
+--- /dev/null
++++ b/arch/m68k/configs/m5485evb_defconfig
+@@ -0,0 +1,777 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24
++# Thu Feb 21 00:19:01 2008
++#
++CONFIG_M68K=y
++CONFIG_MMU=y
++# CONFIG_GENERIC_TIME is not set
++# CONFIG_GENERIC_CLOCKEVENTS is not set
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_TIME_LOW_RES=y
++CONFIG_GENERIC_IOMAP=y
++# CONFIG_NO_IOPORT is not set
++# CONFIG_NO_DMA is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_AUDIT is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=17
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_BLK_DEV_INITRD is not set
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++
++#
++# Platform dependent setup
++#
++# CONFIG_SUN3 is not set
++CONFIG_COLDFIRE=y
++CONFIG_CFV4E=y
++# CONFIG_AMIGA is not set
++# CONFIG_ATARI is not set
++# CONFIG_MAC is not set
++# CONFIG_APOLLO is not set
++# CONFIG_VME is not set
++# CONFIG_HP300 is not set
++# CONFIG_SUN3X is not set
++# CONFIG_Q40 is not set
++
++#
++# Processor type
++#
++# CONFIG_M68020 is not set
++# CONFIG_M68030 is not set
++# CONFIG_M68040 is not set
++# CONFIG_M68060 is not set
++# CONFIG_M54455 is not set
++CONFIG_M547X_8X=y
++# CONFIG_M547X is not set
++CONFIG_M548X=y
++# CONFIG_M5475AFE is not set
++# CONFIG_M5475BFE is not set
++# CONFIG_M5475CFE is not set
++# CONFIG_M5475DFE is not set
++# CONFIG_M5475EFE is not set
++# CONFIG_M5475FFE is not set
++# CONFIG_M5485AFE is not set
++# CONFIG_M5485BFE is not set
++CONFIG_M5485CFE=y
++# CONFIG_M5485DFE is not set
++# CONFIG_M5485EFE is not set
++# CONFIG_M5485FFE is not set
++CONFIG_MCFCLK=50000000
++# CONFIG_MCF_USER_HALT is not set
++CONFIG_MMU_CFV4E=y
++CONFIG_SDRAM_BASE=0x00000000
++CONFIG_SDRAM_SIZE=0x04000000
++# CONFIG_M68KFPU_EMU is not set
++CONFIG_ADVANCED=y
++# CONFIG_RMW_INSNS is not set
++CONFIG_SINGLE_MEMORY_CHUNK=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_NEED_MULTIPLE_NODES=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++
++#
++# General setup
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++CONFIG_PROC_HARDWARE=y
++CONFIG_ZONE_DMA=y
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++
++#
++# Power management options
++#
++# CONFIG_PM is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++CONFIG_NET_KEY=y
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_MULTIPLE_TABLES is not set
++# CONFIG_IP_ROUTE_MULTIPATH is not set
++# CONFIG_IP_ROUTE_VERBOSE is not set
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++CONFIG_INET_AH=y
++CONFIG_INET_ESP=y
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_STANDALONE is not set
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=64000
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_COLDFIRE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_COLDFIRE_EDMA is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++CONFIG_HID_DEBUG=y
++# CONFIG_HIDRAW is not set
++# CONFIG_USB_SUPPORT is not set
++# CONFIG_MMC is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# Character devices
++#
++# CONFIG_SERIAL_CONSOLE is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_MINIX_FS=y
++# CONFIG_ROMFS_FS is not set
++# CONFIG_INOTIFY is not set
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++CONFIG_NTFS_FS=y
++# CONFIG_NTFS_DEBUG is not set
++CONFIG_NTFS_RW=y
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++# CONFIG_PROC_KCORE is not set
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=y
++# CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++# CONFIG_ENABLE_MUST_CHECK is not set
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++CONFIG_DEBUG_SLAB=y
++# CONFIG_DEBUG_SLAB_LEAK is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_FRAME_POINTER is not set
++CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++CONFIG_BOOTPARAM=y
++CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.163.2:/tftpboot/ltib ip=172.27.163.3:172.27.163.2:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)"
++
++#
++# CodeTEST Setup
++#
++# CONFIG_CODETEST is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_HMAC=y
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=y
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++CONFIG_CRYPTO_TEST=m
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_HW is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=y
++CONFIG_CRC16=y
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++CONFIG_LIBCRC32C=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+--- a/drivers/serial/mcfserial.c
++++ b/drivers/serial/mcfserial.c
+@@ -45,6 +45,11 @@
+ #include <asm/coldfire.h>
+ #include <asm/mcfsim.h>
+ #include <asm/mcfuart.h>
++#if defined(CONFIG_M547X_8X)
++#include <asm/m5485sim.h>
++#include <asm/m5485psc.h>
++#include <asm/m5485gpio.h>
++#endif
+ #ifdef CONFIG_NETtel
+ #include <asm/nettel.h>
+ #endif
+@@ -64,7 +69,7 @@ struct timer_list mcfrs_timer_struct;
+ #define	DEFAULT_CBAUD		B38400
+ #elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \
+       defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO) || \
+-      defined(CONFIG_M54455)
++      defined(CONFIG_M54455) || defined(CONFIG_M547X_8X)
+ #define CONSOLE_BAUD_RATE 	115200
+ #define DEFAULT_CBAUD		B115200
+ #elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
+@@ -97,7 +102,8 @@ static struct tty_driver *mcfrs_serial_d
+ #undef SERIAL_DEBUG_FLOW
+ 
+ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+-    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M54455)
++    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M54455) || \
++    defined(CONFIG_M547X_8X)
+ #define	IRQBASE	(MCFINT_VECBASE+MCFINT_UART0)
+ #else
+ #define	IRQBASE	73
+@@ -117,7 +123,11 @@ static struct mcf_serial mcfrs_table[] =
+ 	{  /* ttyS1 */
+ 		.magic = 0,
+ 		.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2),
++#if defined(CONFIG_M547X_8X)
++		.irq = IRQBASE-1,
++#else
+ 		.irq = IRQBASE+1,
++#endif
+ 		.flags = ASYNC_BOOT_AUTOCONF,
+ 	},
+ #endif
+@@ -125,7 +135,11 @@ static struct mcf_serial mcfrs_table[] =
+ 	{  /* ttyS2 */
+ 		.magic = 0,
+ 		.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE3),
++#if defined(CONFIG_M547X_8X)
++		.irq = IRQBASE-2,
++#else
+ 		.irq = IRQBASE+2,
++#endif
+ 		.flags = ASYNC_BOOT_AUTOCONF,
+ 	},
+ #endif
+@@ -133,7 +147,11 @@ static struct mcf_serial mcfrs_table[] =
+ 	{  /* ttyS3 */
+ 		.magic = 0,
+ 		.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE4),
++#if defined(CONFIG_M547X_8X)
++		.irq = IRQBASE-3,
++#else
+ 		.irq = IRQBASE+3,
++#endif
+ 		.flags = ASYNC_BOOT_AUTOCONF,
+ 	},
+ #endif
+@@ -412,7 +430,12 @@ irqreturn_t mcfrs_interrupt(int irq, voi
+ 	struct mcf_serial	*info;
+ 	unsigned char		isr;
+ 
++/* JKM -- revisit! IRQ compute */
++#if defined(CONFIG_M547X_8X)
++	info = &mcfrs_table[(IRQBASE - irq)];
++#else
+ 	info = &mcfrs_table[(irq - IRQBASE)];
++#endif
+ 	isr = info->addr[MCFUART_UISR] & info->imr;
+ 
+ 	if (isr & MCFUART_UIR_RXREADY)
+@@ -1621,6 +1644,22 @@ static void mcfrs_irqinit(struct mcf_ser
+ 		/* GPIOs also must be initalized, depends on board */
+ 		break;
+ 	}
++#elif defined(CONFIG_M547X_8X)
++	volatile unsigned char  *uartp;
++	uartp = (volatile unsigned char *)info->addr;
++
++	if (info->line > 3) {
++		printk("SERIAL: don't know how to handle UART %d interrupt?\n",
++			info->line);
++		return;
++	}
++
++	/* Set GPIO port register to enable PSC(port) signals */
++	MCF_PAR_PSCn(info->line) = (0
++		| MCF_PAR_PSC_TXD
++		| MCF_PAR_PSC_RXD);
++
++	MCF_ICR(info->irq - 64) = ILP_PSCn(info->line);
+ #else
+ 	volatile unsigned char	*icrp, *uartp;
+ 
+@@ -1983,7 +2022,7 @@ struct console mcfrs_console = {
+ 
+ static int __init mcfrs_console_init(void)
+ {
+-#ifndef CONFIG_M54455
++#if !(defined(CONFIG_M54455) || defined(CONFIG_M547X_8X))
+ 	register_console(&mcfrs_console);
+ #endif
+ 	return 0;
+--- a/include/asm-m68k/cf_pgalloc.h
++++ b/include/asm-m68k/cf_pgalloc.h
+@@ -1,9 +1,14 @@
+ #ifndef M68K_CF_PGALLOC_H
+ #define M68K_CF_PGALLOC_H
+ 
++/* JKM -- added -- needed? */
++#include <linux/highmem.h>
++
+ #include <asm/coldfire.h>
+ #include <asm/page.h>
+ #include <asm/cf_tlbflush.h>
++/* JKM -- added -- needed? */
++#include <asm/cf_cacheflush.h>
+ 
+ extern inline void pte_free_kernel(pte_t *pte)
+ {
+--- a/include/asm-m68k/cfcache.h
++++ b/include/asm-m68k/cfcache.h
+@@ -70,7 +70,33 @@
+ /* cache disabled for testing */
+ #define CACHE_INITIAL_MODE 	(CF_CACR_EUSP)
+ #endif /* CONFIG_M5445X_DISABLE_CACHE */
+-#endif /* CONFIG_M54455 */
++
++#elif defined(CONFIG_M547X_8X)
++/*
++ * M547x/M548x Cache Configuration
++ *	- cache line size is 16 bytes
++ *	- cache is 4-way set associative
++ *	- each cache has 512 sets (128k / 16bytes / 4way)
++ *	- I-Cache size is 32KB
++ *	- D-Cache size is 32KB
++ */
++#define ICACHE_SIZE 0x8000		/* instruction - 32k */
++#define DCACHE_SIZE 0x8000		/* data - 32k */
++
++#define CACHE_LINE_SIZE 0x0010		/* 16 bytes */
++#define CACHE_SETS 0x0200		/* 512 sets */
++#define CACHE_WAYS 0x0004		/* 4 way */
++
++#define CACHE_DISABLE_MODE	(CF_CACR_DCINVA+	\
++				 CF_CACR_BCINVA+	\
++				 CF_CACR_ICINVA)
++
++#define CACHE_INITIAL_MODE 	(CF_CACR_DEC+		\
++				 CF_CACR_BEC+		\
++				 CF_CACR_IEC+		\
++				 CF_CACR_DESB+		\
++				 CF_CACR_EUSP)
++#endif /* CONFIG_M547X_8X */
+ 
+ #ifndef __ASSEMBLY__
+ 
+--- a/include/asm-m68k/coldfire.h
++++ b/include/asm-m68k/coldfire.h
+@@ -1,9 +1,16 @@
+ #ifndef _COLDFIRE_H_
+ #define _COLDFIRE_H_
+ 
++#if defined(CONFIG_M54455)
+ #define MCF_MBAR	0x0
+ #define MCF_RAMBAR1 	0x40000000
+ #define MCF_SRAM	0x80000000
++#elif defined(CONFIG_M547X_8X)
++#define MCF_MBAR	0xE0000000
++#define MCF_RAMBAR0	0xE3000000
++#define MCF_RAMBAR1	0xE3001000
++#endif
++
+ #define MCF_CLK     	CONFIG_MCFCLK
+ #define MCF_BUSCLK	(CONFIG_MCFCLK/2)
+ 
+--- /dev/null
++++ b/include/asm-m68k/m5485gpio.h
+@@ -0,0 +1,694 @@
++/*
++ * File:	mcf548x_gpio.h
++ * Purpose:	Register and bit definitions for the MCF548X
++ *
++ * Notes:	
++ *	
++ */
++
++#ifndef _M5485GPIO_H_
++#define _M5485GPIO_H_
++
++/*********************************************************************
++*
++* General Purpose I/O (GPIO)
++*
++*********************************************************************/
++
++/* Register read/write macros */
++#define MCF_GPIO_PODR_FBCTL         MCF_REG08(0x000A00)
++#define MCF_GPIO_PODR_FBCS          MCF_REG08(0x000A01)
++#define MCF_GPIO_PODR_DMA           MCF_REG08(0x000A02)
++#define MCF_GPIO_PODR_FEC0H         MCF_REG08(0x000A04)
++#define MCF_GPIO_PODR_FEC0L         MCF_REG08(0x000A05)
++#define MCF_GPIO_PODR_FEC1H         MCF_REG08(0x000A06)
++#define MCF_GPIO_PODR_FEC1L         MCF_REG08(0x000A07)
++#define MCF_GPIO_PODR_FECI2C        MCF_REG08(0x000A08)
++#define MCF_GPIO_PODR_PCIBG         MCF_REG08(0x000A09)
++#define MCF_GPIO_PODR_PCIBR         MCF_REG08(0x000A0A)
++#define MCF_GPIO_PODR_PSC3PSC2      MCF_REG08(0x000A0C)
++#define MCF_GPIO_PODR_PSC1PSC0      MCF_REG08(0x000A0D)
++#define MCF_GPIO_PODR_DSPI          MCF_REG08(0x000A0E)
++#define MCF_GPIO_PDDR_FBCTL         MCF_REG08(0x000A10)
++#define MCF_GPIO_PDDR_FBCS          MCF_REG08(0x000A11)
++#define MCF_GPIO_PDDR_DMA           MCF_REG08(0x000A12)
++#define MCF_GPIO_PDDR_FEC0H         MCF_REG08(0x000A14)
++#define MCF_GPIO_PDDR_FEC0L         MCF_REG08(0x000A15)
++#define MCF_GPIO_PDDR_FEC1H         MCF_REG08(0x000A16)
++#define MCF_GPIO_PDDR_FEC1L         MCF_REG08(0x000A17)
++#define MCF_GPIO_PDDR_FECI2C        MCF_REG08(0x000A18)
++#define MCF_GPIO_PDDR_PCIBG         MCF_REG08(0x000A19)
++#define MCF_GPIO_PDDR_PCIBR         MCF_REG08(0x000A1A)
++#define MCF_GPIO_PDDR_PSC3PSC2      MCF_REG08(0x000A1C)
++#define MCF_GPIO_PDDR_PSC1PSC0      MCF_REG08(0x000A1D)
++#define MCF_GPIO_PDDR_DSPI          MCF_REG08(0x000A1E)
++#define MCF_GPIO_PPDSDR_FBCTL       MCF_REG08(0x000A20)
++#define MCF_GPIO_PPDSDR_FBCS        MCF_REG08(0x000A21)
++#define MCF_GPIO_PPDSDR_DMA         MCF_REG08(0x000A22)
++#define MCF_GPIO_PPDSDR_FEC0H       MCF_REG08(0x000A24)
++#define MCF_GPIO_PPDSDR_FEC0L       MCF_REG08(0x000A25)
++#define MCF_GPIO_PPDSDR_FEC1H       MCF_REG08(0x000A26)
++#define MCF_GPIO_PPDSDR_FEC1L       MCF_REG08(0x000A27)
++#define MCF_GPIO_PPDSDR_FECI2C      MCF_REG08(0x000A28)
++#define MCF_GPIO_PPDSDR_PCIBG       MCF_REG08(0x000A29)
++#define MCF_GPIO_PPDSDR_PCIBR       MCF_REG08(0x000A2A)
++#define MCF_GPIO_PPDSDR_PSC3PSC2    MCF_REG08(0x000A2C)
++#define MCF_GPIO_PPDSDR_PSC1PSC0    MCF_REG08(0x000A2D)
++#define MCF_GPIO_PPDSDR_DSPI        MCF_REG08(0x000A2E)
++#define MCF_GPIO_PCLRR_FBCTL        MCF_REG08(0x000A30)
++#define MCF_GPIO_PCLRR_FBCS         MCF_REG08(0x000A31)
++#define MCF_GPIO_PCLRR_DMA          MCF_REG08(0x000A32)
++#define MCF_GPIO_PCLRR_FEC0H        MCF_REG08(0x000A34)
++#define MCF_GPIO_PCLRR_FEC0L        MCF_REG08(0x000A35)
++#define MCF_GPIO_PCLRR_FEC1H        MCF_REG08(0x000A36)
++#define MCF_GPIO_PCLRR_FEC1L        MCF_REG08(0x000A37)
++#define MCF_GPIO_PCLRR_FECI2C       MCF_REG08(0x000A38)
++#define MCF_GPIO_PCLRR_PCIBG        MCF_REG08(0x000A39)
++#define MCF_GPIO_PCLRR_PCIBR        MCF_REG08(0x000A3A)
++#define MCF_GPIO_PCLRR_PSC3PSC2     MCF_REG08(0x000A3C)
++#define MCF_GPIO_PCLRR_PSC1PSC0     MCF_REG08(0x000A3D)
++#define MCF_GPIO_PCLRR_DSPI         MCF_REG08(0x000A3E)
++#define MCF_GPIO_PAR_FBCTL          MCF_REG16(0x000A40)
++#define MCF_GPIO_PAR_FBCS           MCF_REG08(0x000A42)
++#define MCF_GPIO_PAR_DMA            MCF_REG08(0x000A43)
++#define MCF_GPIO_PAR_FECI2CIRQ      MCF_REG16(0x000A44)
++#define MCF_GPIO_PAR_PCIBG          MCF_REG16(0x000A48)
++#define MCF_GPIO_PAR_PCIBR          MCF_REG16(0x000A4A)
++#define MCF_GPIO_PAR_PSC3           MCF_REG08(0x000A4C)
++#define MCF_GPIO_PAR_PSC2           MCF_REG08(0x000A4D)
++#define MCF_GPIO_PAR_PSC1           MCF_REG08(0x000A4E)
++#define MCF_GPIO_PAR_PSC0           MCF_REG08(0x000A4F)
++#define MCF_GPIO_PAR_DSPI           MCF_REG16(0x000A50)
++#define MCF_GPIO_PAR_TIMER          MCF_REG08(0x000A52)
++
++/* Bit definitions and macros for MCF_GPIO_PODR_FBCTL */
++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL0              (0x01)
++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL1              (0x02)
++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL2              (0x04)
++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL3              (0x08)
++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL4              (0x10)
++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL5              (0x20)
++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL6              (0x40)
++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL7              (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PODR_FBCS */
++#define MCF_GPIO_PODR_FBCS_PODRFBCS1                (0x02)
++#define MCF_GPIO_PODR_FBCS_PODRFBCS2                (0x04)
++#define MCF_GPIO_PODR_FBCS_PODRFBCS3                (0x08)
++#define MCF_GPIO_PODR_FBCS_PODRFBCS4                (0x10)
++#define MCF_GPIO_PODR_FBCS_PODRFBCS5                (0x20)
++
++/* Bit definitions and macros for MCF_GPIO_PODR_DMA */
++#define MCF_GPIO_PODR_DMA_PODRDMA0                  (0x01)
++#define MCF_GPIO_PODR_DMA_PODRDMA1                  (0x02)
++#define MCF_GPIO_PODR_DMA_PODRDMA2                  (0x04)
++#define MCF_GPIO_PODR_DMA_PODRDMA3                  (0x08)
++
++/* Bit definitions and macros for MCF_GPIO_PODR_FEC0H */
++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H0              (0x01)
++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H1              (0x02)
++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H2              (0x04)
++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H3              (0x08)
++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H4              (0x10)
++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H5              (0x20)
++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H6              (0x40)
++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H7              (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PODR_FEC0L */
++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L0              (0x01)
++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L1              (0x02)
++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L2              (0x04)
++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L3              (0x08)
++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L4              (0x10)
++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L5              (0x20)
++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L6              (0x40)
++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L7              (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PODR_FEC1H */
++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H0              (0x01)
++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H1              (0x02)
++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H2              (0x04)
++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H3              (0x08)
++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H4              (0x10)
++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H5              (0x20)
++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H6              (0x40)
++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H7              (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PODR_FEC1L */
++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L0              (0x01)
++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L1              (0x02)
++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L2              (0x04)
++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L3              (0x08)
++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L4              (0x10)
++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L5              (0x20)
++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L6              (0x40)
++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L7              (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */
++#define MCF_GPIO_PODR_FECI2C_PODRFECI2C0            (0x01)
++#define MCF_GPIO_PODR_FECI2C_PODRFECI2C1            (0x02)
++#define MCF_GPIO_PODR_FECI2C_PODRFECI2C2            (0x04)
++#define MCF_GPIO_PODR_FECI2C_PODRFECI2C3            (0x08)
++
++/* Bit definitions and macros for MCF_GPIO_PODR_PCIBG */
++#define MCF_GPIO_PODR_PCIBG_PODRPCIBG0              (0x01)
++#define MCF_GPIO_PODR_PCIBG_PODRPCIBG1              (0x02)
++#define MCF_GPIO_PODR_PCIBG_PODRPCIBG2              (0x04)
++#define MCF_GPIO_PODR_PCIBG_PODRPCIBG3              (0x08)
++#define MCF_GPIO_PODR_PCIBG_PODRPCIBG4              (0x10)
++
++/* Bit definitions and macros for MCF_GPIO_PODR_PCIBR */
++#define MCF_GPIO_PODR_PCIBR_PODRPCIBR0              (0x01)
++#define MCF_GPIO_PODR_PCIBR_PODRPCIBR1              (0x02)
++#define MCF_GPIO_PODR_PCIBR_PODRPCIBR2              (0x04)
++#define MCF_GPIO_PODR_PCIBR_PODRPCIBR3              (0x08)
++#define MCF_GPIO_PODR_PCIBR_PODRPCIBR4              (0x10)
++
++/* Bit definitions and macros for MCF_GPIO_PODR_PSC3PSC2 */
++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC20        (0x01)
++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC21        (0x02)
++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC22        (0x04)
++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC23        (0x08)
++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC24        (0x10)
++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC25        (0x20)
++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC26        (0x40)
++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC27        (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PODR_PSC1PSC0 */
++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC00        (0x01)
++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC01        (0x02)
++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC02        (0x04)
++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC03        (0x08)
++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC04        (0x10)
++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC05        (0x20)
++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC06        (0x40)
++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC07        (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PODR_DSPI */
++#define MCF_GPIO_PODR_DSPI_PODRDSPI0                (0x01)
++#define MCF_GPIO_PODR_DSPI_PODRDSPI1                (0x02)
++#define MCF_GPIO_PODR_DSPI_PODRDSPI2                (0x04)
++#define MCF_GPIO_PODR_DSPI_PODRDSPI3                (0x08)
++#define MCF_GPIO_PODR_DSPI_PODRDSPI4                (0x10)
++#define MCF_GPIO_PODR_DSPI_PODRDSPI5                (0x20)
++#define MCF_GPIO_PODR_DSPI_PODRDSPI6                (0x40)
++
++/* Bit definitions and macros for MCF_GPIO_PDDR_FBCTL */
++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL0              (0x01)
++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL1              (0x02)
++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL2              (0x04)
++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL3              (0x08)
++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL4              (0x10)
++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL5              (0x20)
++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL6              (0x40)
++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL7              (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PDDR_FBCS */
++#define MCF_GPIO_PDDR_FBCS_PDDRFBCS1                (0x02)
++#define MCF_GPIO_PDDR_FBCS_PDDRFBCS2                (0x04)
++#define MCF_GPIO_PDDR_FBCS_PDDRFBCS3                (0x08)
++#define MCF_GPIO_PDDR_FBCS_PDDRFBCS4                (0x10)
++#define MCF_GPIO_PDDR_FBCS_PDDRFBCS5                (0x20)
++
++/* Bit definitions and macros for MCF_GPIO_PDDR_DMA */
++#define MCF_GPIO_PDDR_DMA_PDDRDMA0                  (0x01)
++#define MCF_GPIO_PDDR_DMA_PDDRDMA1                  (0x02)
++#define MCF_GPIO_PDDR_DMA_PDDRDMA2                  (0x04)
++#define MCF_GPIO_PDDR_DMA_PDDRDMA3                  (0x08)
++
++/* Bit definitions and macros for MCF_GPIO_PDDR_FEC0H */
++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H0              (0x01)
++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H1              (0x02)
++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H2              (0x04)
++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H3              (0x08)
++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H4              (0x10)
++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H5              (0x20)
++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H6              (0x40)
++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H7              (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PDDR_FEC0L */
++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L0              (0x01)
++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L1              (0x02)
++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L2              (0x04)
++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L3              (0x08)
++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L4              (0x10)
++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L5              (0x20)
++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L6              (0x40)
++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L7              (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PDDR_FEC1H */
++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H0              (0x01)
++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H1              (0x02)
++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H2              (0x04)
++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H3              (0x08)
++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H4              (0x10)
++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H5              (0x20)
++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H6              (0x40)
++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H7              (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PDDR_FEC1L */
++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L0              (0x01)
++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L1              (0x02)
++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L2              (0x04)
++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L3              (0x08)
++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L4              (0x10)
++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L5              (0x20)
++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L6              (0x40)
++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L7              (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */
++#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C0            (0x01)
++#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C1            (0x02)
++#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C2            (0x04)
++#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C3            (0x08)
++
++/* Bit definitions and macros for MCF_GPIO_PDDR_PCIBG */
++#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG0              (0x01)
++#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG1              (0x02)
++#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG2              (0x04)
++#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG3              (0x08)
++#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG4              (0x10)
++
++/* Bit definitions and macros for MCF_GPIO_PDDR_PCIBR */
++#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR0              (0x01)
++#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR1              (0x02)
++#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR2              (0x04)
++#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR3              (0x08)
++#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR4              (0x10)
++
++/* Bit definitions and macros for MCF_GPIO_PDDR_PSC3PSC2 */
++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC20        (0x01)
++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC21        (0x02)
++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC22        (0x04)
++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC23        (0x08)
++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC24        (0x10)
++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC25        (0x20)
++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC26        (0x40)
++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC27        (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PDDR_PSC1PSC0 */
++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC00        (0x01)
++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC01        (0x02)
++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC02        (0x04)
++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC03        (0x08)
++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC04        (0x10)
++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC05        (0x20)
++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC06        (0x40)
++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC07        (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PDDR_DSPI */
++#define MCF_GPIO_PDDR_DSPI_PDDRDSPI0                (0x01)
++#define MCF_GPIO_PDDR_DSPI_PDDRDSPI1                (0x02)
++#define MCF_GPIO_PDDR_DSPI_PDDRDSPI2                (0x04)
++#define MCF_GPIO_PDDR_DSPI_PDDRDSPI3                (0x08)
++#define MCF_GPIO_PDDR_DSPI_PDDRDSPI4                (0x10)
++#define MCF_GPIO_PDDR_DSPI_PDDRDSPI5                (0x20)
++#define MCF_GPIO_PDDR_DSPI_PDDRDSPI6                (0x40)
++
++/* Bit definitions and macros for MCF_GPIO_PPDSDR_FBCTL */
++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL0          (0x01)
++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL1          (0x02)
++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL2          (0x04)
++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL3          (0x08)
++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL4          (0x10)
++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL5          (0x20)
++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL6          (0x40)
++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL7          (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PPDSDR_FBCS */
++#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS1            (0x02)
++#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS2            (0x04)
++#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS3            (0x08)
++#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS4            (0x10)
++#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS5            (0x20)
++
++/* Bit definitions and macros for MCF_GPIO_PPDSDR_DMA */
++#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA0              (0x01)
++#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA1              (0x02)
++#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA2              (0x04)
++#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA3              (0x08)
++
++/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC0H */
++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H0          (0x01)
++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H1          (0x02)
++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H2          (0x04)
++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H3          (0x08)
++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H4          (0x10)
++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H5          (0x20)
++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H6          (0x40)
++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H7          (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC0L */
++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L0          (0x01)
++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L1          (0x02)
++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L2          (0x04)
++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L3          (0x08)
++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L4          (0x10)
++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L5          (0x20)
++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L6          (0x40)
++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L7          (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC1H */
++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H0          (0x01)
++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H1          (0x02)
++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H2          (0x04)
++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H3          (0x08)
++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H4          (0x10)
++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H5          (0x20)
++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H6          (0x40)
++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H7          (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC1L */
++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L0          (0x01)
++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L1          (0x02)
++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L2          (0x04)
++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L3          (0x08)
++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L4          (0x10)
++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L5          (0x20)
++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L6          (0x40)
++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L7          (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */
++#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C0        (0x01)
++#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C1        (0x02)
++#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C2        (0x04)
++#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C3        (0x08)
++
++/* Bit definitions and macros for MCF_GPIO_PPDSDR_PCIBG */
++#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG0          (0x01)
++#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG1          (0x02)
++#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG2          (0x04)
++#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG3          (0x08)
++#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG4          (0x10)
++
++/* Bit definitions and macros for MCF_GPIO_PPDSDR_PCIBR */
++#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR0          (0x01)
++#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR1          (0x02)
++#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR2          (0x04)
++#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR3          (0x08)
++#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR4          (0x10)
++
++/* Bit definitions and macros for MCF_GPIO_PPDSDR_PSC3PSC2 */
++#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC20    (0x01)
++#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC21    (0x02)
++#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC22    (0x04)
++#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC23    (0x08)
++#define MCF_GPIO_PPDSDR_PSC3PSC2_PDDRPSC3PSC24      (0x10)
++#define MCF_GPIO_PPDSDR_PSC3PSC2_PDDRPSC3PSC25      (0x20)
++#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC26    (0x40)
++#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC27    (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PPDSDR_PSC1PSC0 */
++#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC00    (0x01)
++#define MCF_GPIO_PPDSDR_PSC1PSC0_PDDRPSC1PSC01      (0x02)
++#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC02    (0x04)
++#define MCF_GPIO_PPDSDR_PSC1PSC0_PDDRPSC1PSC03      (0x08)
++#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC04    (0x10)
++#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC05    (0x20)
++#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC06    (0x40)
++#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC07    (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PPDSDR_DSPI */
++#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI0            (0x01)
++#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI1            (0x02)
++#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI2            (0x04)
++#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI3            (0x08)
++#define MCF_GPIO_PPDSDR_DSPI_PDDRDSPI4              (0x10)
++#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI5            (0x20)
++#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI6            (0x40)
++
++/* Bit definitions and macros for MCF_GPIO_PCLRR_FBCTL */
++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL0            (0x01)
++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL1            (0x02)
++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL2            (0x04)
++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL3            (0x08)
++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL4            (0x10)
++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL5            (0x20)
++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL6            (0x40)
++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL7            (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PCLRR_FBCS */
++#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS1              (0x02)
++#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS2              (0x04)
++#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS3              (0x08)
++#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS4              (0x10)
++#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS5              (0x20)
++
++/* Bit definitions and macros for MCF_GPIO_PCLRR_DMA */
++#define MCF_GPIO_PCLRR_DMA_PCLRRDMA0                (0x01)
++#define MCF_GPIO_PCLRR_DMA_PCLRRDMA1                (0x02)
++#define MCF_GPIO_PCLRR_DMA_PCLRRDMA2                (0x04)
++#define MCF_GPIO_PCLRR_DMA_PCLRRDMA3                (0x08)
++
++/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC0H */
++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H0            (0x01)
++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H1            (0x02)
++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H2            (0x04)
++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H3            (0x08)
++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H4            (0x10)
++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H5            (0x20)
++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H6            (0x40)
++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H7            (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC0L */
++#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L0            (0x01)
++#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L1             (0x02)
++#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L2            (0x04)
++#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L3            (0x08)
++#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L4             (0x10)
++#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L5             (0x20)
++#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L6             (0x40)
++#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L7            (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC1H */
++#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H0            (0x01)
++#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H1            (0x02)
++#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H2            (0x04)
++#define MCF_GPIO_PCLRR_FEC1H_PODRFEC1H3             (0x08)
++#define MCF_GPIO_PCLRR_FEC1H_PODRFEC1H4             (0x10)
++#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H5            (0x20)
++#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H6            (0x40)
++#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H7            (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC1L */
++#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L0            (0x01)
++#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L1            (0x02)
++#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L2            (0x04)
++#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L3            (0x08)
++#define MCF_GPIO_PCLRR_FEC1L_PODRFEC1L4             (0x10)
++#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L5            (0x20)
++#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L6            (0x40)
++#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L7            (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */
++#define MCF_GPIO_PCLRR_FECI2C_PCLRRFECI2C0          (0x01)
++#define MCF_GPIO_PCLRR_FECI2C_PCLRRFECI2C1          (0x02)
++#define MCF_GPIO_PCLRR_FECI2C_PODRFECI2C2           (0x04)
++#define MCF_GPIO_PCLRR_FECI2C_PCLRRFECI2C3          (0x08)
++
++/* Bit definitions and macros for MCF_GPIO_PCLRR_PCIBG */
++#define MCF_GPIO_PCLRR_PCIBG_PODRPCIBG0             (0x01)
++#define MCF_GPIO_PCLRR_PCIBG_PODRPCIBG1             (0x02)
++#define MCF_GPIO_PCLRR_PCIBG_PODRPCIBG2             (0x04)
++#define MCF_GPIO_PCLRR_PCIBG_PCLRRPCIBG3            (0x08)
++#define MCF_GPIO_PCLRR_PCIBG_PCLRRPCIBG4            (0x10)
++
++/* Bit definitions and macros for MCF_GPIO_PCLRR_PCIBR */
++#define MCF_GPIO_PCLRR_PCIBR_PCLRRPCIBR0            (0x01)
++#define MCF_GPIO_PCLRR_PCIBR_PCLRRPCIBR1            (0x02)
++#define MCF_GPIO_PCLRR_PCIBR_PCLRRPCIBR2            (0x04)
++#define MCF_GPIO_PCLRR_PCIBR_PODRPCIBR3             (0x08)
++#define MCF_GPIO_PCLRR_PCIBR_PODRPCIBR4             (0x10)
++
++/* Bit definitions and macros for MCF_GPIO_PCLRR_PSC3PSC2 */
++#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC20       (0x01)
++#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC21       (0x02)
++#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC22      (0x04)
++#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC23      (0x08)
++#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC24      (0x10)
++#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC25       (0x20)
++#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC26       (0x40)
++#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC27      (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PCLRR_PSC1PSC0 */
++#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC00      (0x01)
++#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC01      (0x02)
++#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC02      (0x04)
++#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC03      (0x08)
++#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC04      (0x10)
++#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC05      (0x20)
++#define MCF_GPIO_PCLRR_PSC1PSC0_PODRPSC1PSC06       (0x40)
++#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC07      (0x80)
++
++/* Bit definitions and macros for MCF_GPIO_PCLRR_DSPI */
++#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI0              (0x01)
++#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI1              (0x02)
++#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI2              (0x04)
++#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI3              (0x08)
++#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI4              (0x10)
++#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI5              (0x20)
++#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI6              (0x40)
++
++/* Bit definitions and macros for MCF_GPIO_PAR_FBCTL */
++#define MCF_GPIO_PAR_FBCTL_PAR_TS(x)                (((x)&0x0003)<<0)
++#define MCF_GPIO_PAR_FBCTL_PAR_TA                   (0x0004)
++#define MCF_GPIO_PAR_FBCTL_PAR_RWB                  (0x0010)
++#define MCF_GPIO_PAR_FBCTL_PAR_OE                   (0x0040)
++#define MCF_GPIO_PAR_FBCTL_PAR_BWE0                 (0x0100)
++#define MCF_GPIO_PAR_FBCTL_PAR_BWE1                 (0x0400)
++#define MCF_GPIO_PAR_FBCTL_PAR_BWE2                 (0x1000)
++#define MCF_GPIO_PAR_FBCTL_PAR_BWE3                 (0x4000)
++#define MCF_GPIO_PAR_FBCTL_PAR_TS_GPIO              (0)
++#define MCF_GPIO_PAR_FBCTL_PAR_TS_TBST              (2)
++#define MCF_GPIO_PAR_FBCTL_PAR_TS_TS                (3)
++
++/* Bit definitions and macros for MCF_GPIO_PAR_FBCS */
++#define MCF_GPIO_PAR_FBCS_PAR_CS1                   (0x02)
++#define MCF_GPIO_PAR_FBCS_PAR_CS2                   (0x04)
++#define MCF_GPIO_PAR_FBCS_PAR_CS3                   (0x08)
++#define MCF_GPIO_PAR_FBCS_PAR_CS4                   (0x10)
++#define MCF_GPIO_PAR_FBCS_PAR_CS5                   (0x20)
++
++/* Bit definitions and macros for MCF_GPIO_PAR_DMA */
++#define MCF_GPIO_PAR_DMA_PAR_DREQ0(x)               (((x)&0x03)<<0)
++#define MCF_GPIO_PAR_DMA_PAR_DREQ1(x)               (((x)&0x03)<<2)
++#define MCF_GPIO_PAR_DMA_PAR_DACK0(x)               (((x)&0x03)<<4)
++#define MCF_GPIO_PAR_DMA_PAR_DACK1(x)               (((x)&0x03)<<6)
++#define MCF_GPIO_PAR_DMA_PAR_DACKx_GPIO             (0)
++#define MCF_GPIO_PAR_DMA_PAR_DACKx_TOUT             (2)
++#define MCF_GPIO_PAR_DMA_PAR_DACKx_DACK             (3)
++#define MCF_GPIO_PAR_DMA_PAR_DREQx_GPIO             (0)
++#define MCF_GPIO_PAR_DMA_PAR_DREQx_TIN              (2)
++#define MCF_GPIO_PAR_DMA_PAR_DREQx_DREQ             (3)
++
++/* Bit definitions and macros for MCF_GPIO_PAR_FECI2CIRQ */
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_IRQ5             (0x0001)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_IRQ6             (0x0002)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_SCL              (0x0004)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_SDA              (0x0008)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC(x)         (((x)&0x0003)<<6)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO(x)        (((x)&0x0003)<<8)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MII            (0x0400)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E17              (0x0800)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E0MDC            (0x1000)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E0MDIO           (0x2000)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E0MII            (0x4000)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E07              (0x8000)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO_CANRX     (0x0000)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO_SDA       (0x0200)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO_EMDIO     (0x0300)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC_CANTX      (0x0000)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC_SCL        (0x0080)
++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC_EMDC       (0x00C0)
++
++/* Bit definitions and macros for MCF_GPIO_PAR_PCIBG */
++#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG0(x)            (((x)&0x0003)<<0)
++#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG1(x)            (((x)&0x0003)<<2)
++#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG2(x)            (((x)&0x0003)<<4)
++#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG3(x)            (((x)&0x0003)<<6)
++#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG4(x)            (((x)&0x0003)<<8)
++
++/* Bit definitions and macros for MCF_GPIO_PAR_PCIBR */
++#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG0(x)            (((x)&0x0003)<<0)
++#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG1(x)            (((x)&0x0003)<<2)
++#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG2(x)            (((x)&0x0003)<<4)
++#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG3(x)            (((x)&0x0003)<<6)
++#define MCF_GPIO_PAR_PCIBR_PAR_PCIBR4(x)            (((x)&0x0003)<<8)
++
++/* Bit definitions and macros for MCF_GPIO_PAR_PSC3 */
++#define MCF_GPIO_PAR_PSC3_PAR_TXD3                  (0x04)
++#define MCF_GPIO_PAR_PSC3_PAR_RXD3                  (0x08)
++#define MCF_GPIO_PAR_PSC3_PAR_RTS3(x)               (((x)&0x03)<<4)
++#define MCF_GPIO_PAR_PSC3_PAR_CTS3(x)               (((x)&0x03)<<6)
++#define MCF_GPIO_PAR_PSC3_PAR_CTS3_GPIO             (0x00)
++#define MCF_GPIO_PAR_PSC3_PAR_CTS3_BCLK             (0x80)
++#define MCF_GPIO_PAR_PSC3_PAR_CTS3_CTS              (0xC0)
++#define MCF_GPIO_PAR_PSC3_PAR_RTS3_GPIO             (0x00)
++#define MCF_GPIO_PAR_PSC3_PAR_RTS3_FSYNC            (0x20)
++#define MCF_GPIO_PAR_PSC3_PAR_RTS3_RTS              (0x30)
++#define MCF_GPIO_PAR_PSC3_PAR_CTS2_CANRX            (0x40)
++
++/* Bit definitions and macros for MCF_GPIO_PAR_PSC2 */
++#define MCF_GPIO_PAR_PSC2_PAR_TXD2                  (0x04)
++#define MCF_GPIO_PAR_PSC2_PAR_RXD2                  (0x08)
++#define MCF_GPIO_PAR_PSC2_PAR_RTS2(x)               (((x)&0x03)<<4)
++#define MCF_GPIO_PAR_PSC2_PAR_CTS2(x)               (((x)&0x03)<<6)
++#define MCF_GPIO_PAR_PSC2_PAR_CTS2_GPIO             (0x00)
++#define MCF_GPIO_PAR_PSC2_PAR_CTS2_BCLK             (0x80)
++#define MCF_GPIO_PAR_PSC2_PAR_CTS2_CTS              (0xC0)
++#define MCF_GPIO_PAR_PSC2_PAR_RTS2_GPIO             (0x00)
++#define MCF_GPIO_PAR_PSC2_PAR_RTS2_CANTX            (0x10)
++#define MCF_GPIO_PAR_PSC2_PAR_RTS2_FSYNC            (0x20)
++#define MCF_GPIO_PAR_PSC2_PAR_RTS2_RTS              (0x30)
++#define MCF_GPIO_PAR_PSC2_PAR_RTS2_CANRX            (0x40)
++
++/* Bit definitions and macros for MCF_GPIO_PAR_PSC1 */
++#define MCF_GPIO_PAR_PSC1_PAR_TXD1                  (0x04)
++#define MCF_GPIO_PAR_PSC1_PAR_RXD1                  (0x08)
++#define MCF_GPIO_PAR_PSC1_PAR_RTS1(x)               (((x)&0x03)<<4)
++#define MCF_GPIO_PAR_PSC1_PAR_CTS1(x)               (((x)&0x03)<<6)
++#define MCF_GPIO_PAR_PSC1_PAR_CTS1_GPIO             (0x00)
++#define MCF_GPIO_PAR_PSC1_PAR_CTS1_BCLK             (0x80)
++#define MCF_GPIO_PAR_PSC1_PAR_CTS1_CTS              (0xC0)
++#define MCF_GPIO_PAR_PSC1_PAR_RTS1_GPIO             (0x00)
++#define MCF_GPIO_PAR_PSC1_PAR_RTS1_FSYNC            (0x20)
++#define MCF_GPIO_PAR_PSC1_PAR_RTS1_RTS              (0x30)
++
++/* Bit definitions and macros for MCF_GPIO_PAR_PSC0 */
++#define MCF_GPIO_PAR_PSC0_PAR_TXD0                  (0x04)
++#define MCF_GPIO_PAR_PSC0_PAR_RXD0                  (0x08)
++#define MCF_GPIO_PAR_PSC0_PAR_RTS0(x)               (((x)&0x03)<<4)
++#define MCF_GPIO_PAR_PSC0_PAR_CTS0(x)               (((x)&0x03)<<6)
++#define MCF_GPIO_PAR_PSC0_PAR_CTS0_GPIO             (0x00)
++#define MCF_GPIO_PAR_PSC0_PAR_CTS0_BCLK             (0x80)
++#define MCF_GPIO_PAR_PSC0_PAR_CTS0_CTS              (0xC0)
++#define MCF_GPIO_PAR_PSC0_PAR_RTS0_GPIO             (0x00)
++#define MCF_GPIO_PAR_PSC0_PAR_RTS0_FSYNC            (0x20)
++#define MCF_GPIO_PAR_PSC0_PAR_RTS0_RTS              (0x30)
++
++/* Bit definitions and macros for MCF_GPIO_PAR_DSPI */
++#define MCF_GPIO_PAR_DSPI_PAR_SOUT(x)               (((x)&0x0003)<<0)
++#define MCF_GPIO_PAR_DSPI_PAR_SIN(x)                (((x)&0x0003)<<2)
++#define MCF_GPIO_PAR_DSPI_PAR_SCK(x)                (((x)&0x0003)<<4)
++#define MCF_GPIO_PAR_DSPI_PAR_CS0(x)                (((x)&0x0003)<<6)
++#define MCF_GPIO_PAR_DSPI_PAR_CS2(x)                (((x)&0x0003)<<8)
++#define MCF_GPIO_PAR_DSPI_PAR_CS3(x)                (((x)&0x0003)<<10)
++#define MCF_GPIO_PAR_DSPI_PAR_CS5                   (0x1000)
++#define MCF_GPIO_PAR_DSPI_PAR_CS3_GPIO              (0x0000)
++#define MCF_GPIO_PAR_DSPI_PAR_CS3_CANTX             (0x0400)
++#define MCF_GPIO_PAR_DSPI_PAR_CS3_TOUT              (0x0800)
++#define MCF_GPIO_PAR_DSPI_PAR_CS3_DSPICS            (0x0C00)
++#define MCF_GPIO_PAR_DSPI_PAR_CS2_GPIO              (0x0000)
++#define MCF_GPIO_PAR_DSPI_PAR_CS2_CANTX             (0x0100)
++#define MCF_GPIO_PAR_DSPI_PAR_CS2_TOUT              (0x0200)
++#define MCF_GPIO_PAR_DSPI_PAR_CS2_DSPICS            (0x0300)
++#define MCF_GPIO_PAR_DSPI_PAR_CS0_GPIO              (0x0000)
++#define MCF_GPIO_PAR_DSPI_PAR_CS0_FSYNC             (0x0040)
++#define MCF_GPIO_PAR_DSPI_PAR_CS0_RTS               (0x0080)
++#define MCF_GPIO_PAR_DSPI_PAR_CS0_DSPICS            (0x00C0)
++#define MCF_GPIO_PAR_DSPI_PAR_SCK_GPIO              (0x0000)
++#define MCF_GPIO_PAR_DSPI_PAR_SCK_BCLK              (0x0010)
++#define MCF_GPIO_PAR_DSPI_PAR_SCK_CTS               (0x0020)
++#define MCF_GPIO_PAR_DSPI_PAR_SCK_SCK               (0x0030)
++#define MCF_GPIO_PAR_DSPI_PAR_SIN_GPIO              (0x0000)
++#define MCF_GPIO_PAR_DSPI_PAR_SIN_RXD               (0x0008)
++#define MCF_GPIO_PAR_DSPI_PAR_SIN_SIN               (0x000C)
++#define MCF_GPIO_PAR_DSPI_PAR_SOUT_GPIO             (0x0000)
++#define MCF_GPIO_PAR_DSPI_PAR_SOUT_TXD              (0x0002)
++#define MCF_GPIO_PAR_DSPI_PAR_SOUT_SOUT             (0x0003)
++
++/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */
++#define MCF_GPIO_PAR_TIMER_PAR_TOUT2                (0x01)
++#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x)              (((x)&0x03)<<1)
++#define MCF_GPIO_PAR_TIMER_PAR_TOUT3                (0x08)
++#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x)              (((x)&0x03)<<4)
++#define MCF_GPIO_PAR_TIMER_PAR_TIN3_CANRX           (0x00)
++#define MCF_GPIO_PAR_TIMER_PAR_TIN3_IRQ             (0x20)
++#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN             (0x30)
++#define MCF_GPIO_PAR_TIMER_PAR_TIN2_CANRX           (0x00)
++#define MCF_GPIO_PAR_TIMER_PAR_TIN2_IRQ             (0x04)
++#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN             (0x06)
++
++/********************************************************************/
++
++#endif /* _M5485GPIO_H_ */
+--- /dev/null
++++ b/include/asm-m68k/m5485gpt.h
+@@ -0,0 +1,88 @@
++/*
++ * File:	mcf548x_gpt.h
++ * Purpose:	Register and bit definitions for the MCF548X
++ *
++ * Notes:	
++ *	
++ */
++
++#ifndef __MCF548X_GPT_H__
++#define __MCF548X_GPT_H__
++
++/*********************************************************************
++*
++* General Purpose Timers (GPT)
++*
++*********************************************************************/
++
++/* Register read/write macros */
++#define MCF_GPT_GMS0       MCF_REG32(0x000800)
++#define MCF_GPT_GCIR0      MCF_REG32(0x000804)
++#define MCF_GPT_GPWM0      MCF_REG32(0x000808)
++#define MCF_GPT_GSR0       MCF_REG32(0x00080C)
++#define MCF_GPT_GMS1       MCF_REG32(0x000810)
++#define MCF_GPT_GCIR1      MCF_REG32(0x000814)
++#define MCF_GPT_GPWM1      MCF_REG32(0x000818)
++#define MCF_GPT_GSR1       MCF_REG32(0x00081C)
++#define MCF_GPT_GMS2       MCF_REG32(0x000820)
++#define MCF_GPT_GCIR2      MCF_REG32(0x000824)
++#define MCF_GPT_GPWM2      MCF_REG32(0x000828)
++#define MCF_GPT_GSR2       MCF_REG32(0x00082C)
++#define MCF_GPT_GMS3       MCF_REG32(0x000830)
++#define MCF_GPT_GCIR3      MCF_REG32(0x000834)
++#define MCF_GPT_GPWM3      MCF_REG32(0x000838)
++#define MCF_GPT_GSR3       MCF_REG32(0x00083C)
++#define MCF_GPT_GMS(x)     MCF_REG32(0x000800+((x)*0x010))
++#define MCF_GPT_GCIR(x)    MCF_REG32(0x000804+((x)*0x010))
++#define MCF_GPT_GPWM(x)    MCF_REG32(0x000808+((x)*0x010))
++#define MCF_GPT_GSR(x)     MCF_REG32(0x00080C+((x)*0x010))
++
++/* Bit definitions and macros for MCF_GPT_GMS */
++#define MCF_GPT_GMS_TMS(x)         (((x)&0x00000007)<<0)
++#define MCF_GPT_GMS_GPIO(x)        (((x)&0x00000003)<<4)
++#define MCF_GPT_GMS_IEN            (0x00000100)
++#define MCF_GPT_GMS_OD             (0x00000200)
++#define MCF_GPT_GMS_SC             (0x00000400)
++#define MCF_GPT_GMS_CE             (0x00001000)
++#define MCF_GPT_GMS_WDEN           (0x00008000)
++#define MCF_GPT_GMS_ICT(x)         (((x)&0x00000003)<<16)
++#define MCF_GPT_GMS_OCT(x)         (((x)&0x00000003)<<20)
++#define MCF_GPT_GMS_OCPW(x)        (((x)&0x000000FF)<<24)
++#define MCF_GPT_GMS_OCT_FRCLOW     (0x00000000)
++#define MCF_GPT_GMS_OCT_PULSEHI    (0x00100000)
++#define MCF_GPT_GMS_OCT_PULSELO    (0x00200000)
++#define MCF_GPT_GMS_OCT_TOGGLE     (0x00300000)
++#define MCF_GPT_GMS_ICT_ANY        (0x00000000)
++#define MCF_GPT_GMS_ICT_RISE       (0x00010000)
++#define MCF_GPT_GMS_ICT_FALL       (0x00020000)
++#define MCF_GPT_GMS_ICT_PULSE      (0x00030000)
++#define MCF_GPT_GMS_GPIO_INPUT     (0x00000000)
++#define MCF_GPT_GMS_GPIO_OUTLO     (0x00000020)
++#define MCF_GPT_GMS_GPIO_OUTHI     (0x00000030)
++#define MCF_GPT_GMS_TMS_DISABLE    (0x00000000)
++#define MCF_GPT_GMS_TMS_INCAPT     (0x00000001)
++#define MCF_GPT_GMS_TMS_OUTCAPT    (0x00000002)
++#define MCF_GPT_GMS_TMS_PWM        (0x00000003)
++#define MCF_GPT_GMS_TMS_GPIO       (0x00000004)
++
++/* Bit definitions and macros for MCF_GPT_GCIR */
++#define MCF_GPT_GCIR_CNT(x)        (((x)&0x0000FFFF)<<0)
++#define MCF_GPT_GCIR_PRE(x)        (((x)&0x0000FFFF)<<16)
++
++/* Bit definitions and macros for MCF_GPT_GPWM */
++#define MCF_GPT_GPWM_LOAD          (0x00000001)
++#define MCF_GPT_GPWM_PWMOP         (0x00000100)
++#define MCF_GPT_GPWM_WIDTH(x)      (((x)&0x0000FFFF)<<16)
++
++/* Bit definitions and macros for MCF_GPT_GSR */
++#define MCF_GPT_GSR_CAPT           (0x00000001)
++#define MCF_GPT_GSR_COMP           (0x00000002)
++#define MCF_GPT_GSR_PWMP           (0x00000004)
++#define MCF_GPT_GSR_TEXP           (0x00000008)
++#define MCF_GPT_GSR_PIN            (0x00000100)
++#define MCF_GPT_GSR_OVF(x)         (((x)&0x00000007)<<12)
++#define MCF_GPT_GSR_CAPTURE(x)     (((x)&0x0000FFFF)<<16)
++
++/********************************************************************/
++
++#endif /* __MCF548X_GPT_H__ */
+--- /dev/null
++++ b/include/asm-m68k/m5485psc.h
+@@ -0,0 +1,474 @@
++/*
++ * File:	mcf548x_psc.h
++ * Purpose:	Register and bit definitions for the MCF548X
++ *
++ * Notes:	
++ *	
++ */
++
++#ifndef __MCF548X_PSC_H__
++#define __MCF548X_PSC_H__
++
++/*********************************************************************
++*
++* Programmable Serial Controller (PSC)
++*
++*********************************************************************/
++
++/* Register read/write macros */
++#define MCF_PSC_MR0            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008600))
++#define MCF_PSC_SR0            (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008604))
++#define MCF_PSC_CSR0           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008604))
++#define MCF_PSC_CR0            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008608))
++#define MCF_PSC_RB0            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C))
++#define MCF_PSC_TB0            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C))
++#define MCF_PSC_TB_8BIT0       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C))
++#define MCF_PSC_TB_16BIT0      (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C))
++#define MCF_PSC_TB_AC970       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C))
++#define MCF_PSC_IPCR0          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610))
++#define MCF_PSC_ACR0           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610))
++#define MCF_PSC_ISR0           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614))
++#define MCF_PSC_IMR0           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614))
++#define MCF_PSC_CTUR0          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008618))
++#define MCF_PSC_CTLR0          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00861C))
++#define MCF_PSC_IP0            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008634))
++#define MCF_PSC_OPSET0         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008638))
++#define MCF_PSC_OPRESET0       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00863C))
++#define MCF_PSC_SICR0          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008640))
++#define MCF_PSC_IRCR10         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008644))
++#define MCF_PSC_IRCR20         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008648))
++#define MCF_PSC_IRSDR0         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00864C))
++#define MCF_PSC_IRMDR0         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008650))
++#define MCF_PSC_IRFDR0         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008654))
++#define MCF_PSC_RFCNT0         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008658))
++#define MCF_PSC_TFCNT0         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00865C))
++#define MCF_PSC_RFSR0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008664))
++#define MCF_PSC_TFSR0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008684))
++#define MCF_PSC_RFCR0          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008668))
++#define MCF_PSC_TFCR0          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008688))
++#define MCF_PSC_RFAR0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00866E))
++#define MCF_PSC_TFAR0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00868E))
++#define MCF_PSC_RFRP0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008672))
++#define MCF_PSC_TFRP0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008692))
++#define MCF_PSC_RFWP0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008676))
++#define MCF_PSC_TFWP0          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008696))
++#define MCF_PSC_RLRFP0         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867A))
++#define MCF_PSC_TLRFP0         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869A))
++#define MCF_PSC_RLWFP0         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867E))
++#define MCF_PSC_TLWFP0         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869E))
++#define MCF_PSC_MR1            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008700))
++#define MCF_PSC_SR1            (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008704))
++#define MCF_PSC_CSR1           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008704))
++#define MCF_PSC_CR1            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008708))
++#define MCF_PSC_RB1            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C))
++#define MCF_PSC_TB1            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C))
++#define MCF_PSC_TB_8BIT1       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C))
++#define MCF_PSC_TB_16BIT1      (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C))
++#define MCF_PSC_TB_AC971       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C))
++#define MCF_PSC_IPCR1          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008710))
++#define MCF_PSC_ACR1           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008710))
++#define MCF_PSC_ISR1           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008714))
++#define MCF_PSC_IMR1           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008714))
++#define MCF_PSC_CTUR1          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008718))
++#define MCF_PSC_CTLR1          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00871C))
++#define MCF_PSC_IP1            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008734))
++#define MCF_PSC_OPSET1         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008738))
++#define MCF_PSC_OPRESET1       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00873C))
++#define MCF_PSC_SICR1          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008740))
++#define MCF_PSC_IRCR11         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008744))
++#define MCF_PSC_IRCR21         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008748))
++#define MCF_PSC_IRSDR1         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00874C))
++#define MCF_PSC_IRMDR1         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008750))
++#define MCF_PSC_IRFDR1         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008754))
++#define MCF_PSC_RFCNT1         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008758))
++#define MCF_PSC_TFCNT1         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00875C))
++#define MCF_PSC_RFSR1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008764))
++#define MCF_PSC_TFSR1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008784))
++#define MCF_PSC_RFCR1          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008768))
++#define MCF_PSC_TFCR1          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008788))
++#define MCF_PSC_RFAR1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00876E))
++#define MCF_PSC_TFAR1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00878E))
++#define MCF_PSC_RFRP1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008772))
++#define MCF_PSC_TFRP1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008792))
++#define MCF_PSC_RFWP1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008776))
++#define MCF_PSC_TFWP1          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008796))
++#define MCF_PSC_RLRFP1         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00877A))
++#define MCF_PSC_TLRFP1         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00879A))
++#define MCF_PSC_RLWFP1         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00877E))
++#define MCF_PSC_TLWFP1         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00879E))
++#define MCF_PSC_MR2            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008800))
++#define MCF_PSC_SR2            (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008804))
++#define MCF_PSC_CSR2           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008804))
++#define MCF_PSC_CR2            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008808))
++#define MCF_PSC_RB2            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C))
++#define MCF_PSC_TB2            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C))
++#define MCF_PSC_TB_8BIT2       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C))
++#define MCF_PSC_TB_16BIT2      (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C))
++#define MCF_PSC_TB_AC972       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C))
++#define MCF_PSC_IPCR2          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008810))
++#define MCF_PSC_ACR2           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008810))
++#define MCF_PSC_ISR2           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008814))
++#define MCF_PSC_IMR2           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008814))
++#define MCF_PSC_CTUR2          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008818))
++#define MCF_PSC_CTLR2          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00881C))
++#define MCF_PSC_IP2            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008834))
++#define MCF_PSC_OPSET2         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008838))
++#define MCF_PSC_OPRESET2       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00883C))
++#define MCF_PSC_SICR2          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008840))
++#define MCF_PSC_IRCR12         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008844))
++#define MCF_PSC_IRCR22         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008848))
++#define MCF_PSC_IRSDR2         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00884C))
++#define MCF_PSC_IRMDR2         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008850))
++#define MCF_PSC_IRFDR2         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008854))
++#define MCF_PSC_RFCNT2         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008858))
++#define MCF_PSC_TFCNT2         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00885C))
++#define MCF_PSC_RFSR2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008864))
++#define MCF_PSC_TFSR2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008884))
++#define MCF_PSC_RFCR2          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008868))
++#define MCF_PSC_TFCR2          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008888))
++#define MCF_PSC_RFAR2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00886E))
++#define MCF_PSC_TFAR2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00888E))
++#define MCF_PSC_RFRP2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008872))
++#define MCF_PSC_TFRP2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008892))
++#define MCF_PSC_RFWP2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008876))
++#define MCF_PSC_TFWP2          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008896))
++#define MCF_PSC_RLRFP2         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00887A))
++#define MCF_PSC_TLRFP2         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00889A))
++#define MCF_PSC_RLWFP2         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00887E))
++#define MCF_PSC_TLWFP2         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00889E))
++#define MCF_PSC_MR3            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008900))
++#define MCF_PSC_SR3            (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008904))
++#define MCF_PSC_CSR3           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008904))
++#define MCF_PSC_CR3            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008908))
++#define MCF_PSC_RB3            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C))
++#define MCF_PSC_TB3            (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C))
++#define MCF_PSC_TB_8BIT3       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C))
++#define MCF_PSC_TB_16BIT3      (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C))
++#define MCF_PSC_TB_AC973       (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C))
++#define MCF_PSC_IPCR3          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008910))
++#define MCF_PSC_ACR3           (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008910))
++#define MCF_PSC_ISR3           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008914))
++#define MCF_PSC_IMR3           (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008914))
++#define MCF_PSC_CTUR3          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008918))
++#define MCF_PSC_CTLR3          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00891C))
++#define MCF_PSC_IP3            (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008934))
++#define MCF_PSC_OPSET3         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008938))
++#define MCF_PSC_OPRESET3       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00893C))
++#define MCF_PSC_SICR3          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008940))
++#define MCF_PSC_IRCR13         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008944))
++#define MCF_PSC_IRCR23         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008948))
++#define MCF_PSC_IRSDR3         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00894C))
++#define MCF_PSC_IRMDR3         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008950))
++#define MCF_PSC_IRFDR3         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008954))
++#define MCF_PSC_RFCNT3         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008958))
++#define MCF_PSC_TFCNT3         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00895C))
++#define MCF_PSC_RFSR3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008964))
++#define MCF_PSC_TFSR3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008984))
++#define MCF_PSC_RFCR3          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008968))
++#define MCF_PSC_TFCR3          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008988))
++#define MCF_PSC_RFAR3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00896E))
++#define MCF_PSC_TFAR3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00898E))
++#define MCF_PSC_RFRP3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008972))
++#define MCF_PSC_TFRP3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008992))
++#define MCF_PSC_RFWP3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008976))
++#define MCF_PSC_TFWP3          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008996))
++#define MCF_PSC_RLRFP3         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00897A))
++#define MCF_PSC_TLRFP3         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00899A))
++#define MCF_PSC_RLWFP3         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00897E))
++#define MCF_PSC_TLWFP3         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00899E))
++#define MCF_PSC_MR(x)          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008600+((x)*0x100)))
++#define MCF_PSC_SR(x)          (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008604+((x)*0x100)))
++#define MCF_PSC_CSR(x)         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008604+((x)*0x100)))
++#define MCF_PSC_CR(x)          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008608+((x)*0x100)))
++#define MCF_PSC_RB(x)          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100)))
++#define MCF_PSC_TB(x)          (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100)))
++#define MCF_PSC_TB_8BIT(x)     (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100)))
++#define MCF_PSC_TB_16BIT(x)    (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100)))
++#define MCF_PSC_TB_AC97(x)     (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100)))
++#define MCF_PSC_IPCR(x)        (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610+((x)*0x100)))
++#define MCF_PSC_ACR(x)         (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610+((x)*0x100)))
++#define MCF_PSC_ISR(x)         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614+((x)*0x100)))
++#define MCF_PSC_IMR(x)         (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614+((x)*0x100)))
++#define MCF_PSC_CTUR(x)        (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008618+((x)*0x100)))
++#define MCF_PSC_CTLR(x)        (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00861C+((x)*0x100)))
++#define MCF_PSC_IP(x)          (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008634+((x)*0x100)))
++#define MCF_PSC_OPSET(x)       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008638+((x)*0x100)))
++#define MCF_PSC_OPRESET(x)     (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00863C+((x)*0x100)))
++#define MCF_PSC_SICR(x)        (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008640+((x)*0x100)))
++#define MCF_PSC_IRCR1(x)       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008644+((x)*0x100)))
++#define MCF_PSC_IRCR2(x)       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008648+((x)*0x100)))
++#define MCF_PSC_IRSDR(x)       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00864C+((x)*0x100)))
++#define MCF_PSC_IRMDR(x)       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008650+((x)*0x100)))
++#define MCF_PSC_IRFDR(x)       (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008654+((x)*0x100)))
++#define MCF_PSC_RFCNT(x)       (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008658+((x)*0x100)))
++#define MCF_PSC_TFCNT(x)       (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00865C+((x)*0x100)))
++#define MCF_PSC_RFSR(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008664+((x)*0x100)))
++#define MCF_PSC_TFSR(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008684+((x)*0x100)))
++#define MCF_PSC_RFCR(x)        (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008668+((x)*0x100)))
++#define MCF_PSC_TFCR(x)        (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008688+((x)*0x100)))
++#define MCF_PSC_RFAR(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + (0x00866E)+((x)*0x100)))
++#define MCF_PSC_TFAR(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + (0x00868E)+((x)*0x100)))
++#define MCF_PSC_RFRP(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008672+((x)*0x100)))
++#define MCF_PSC_TFRP(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008692+((x)*0x100)))
++#define MCF_PSC_RFWP(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008676+((x)*0x100)))
++#define MCF_PSC_TFWP(x)        (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008696+((x)*0x100)))
++#define MCF_PSC_RLRFP(x)       (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867A+((x)*0x100)))
++#define MCF_PSC_TLRFP(x)       (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869A+((x)*0x100)))
++#define MCF_PSC_RLWFP(x)       (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867E+((x)*0x100)))
++#define MCF_PSC_TLWFP(x)       (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869E+((x)*0x100)))
++
++/* Bit definitions and macros for MCF_PSC_MR */
++#define MCF_PSC_MR_BC(x)              (((x)&0x03)<<0)
++#define MCF_PSC_MR_PT                 (0x04)
++#define MCF_PSC_MR_PM(x)              (((x)&0x03)<<3)
++#define MCF_PSC_MR_ERR                (0x20)
++#define MCF_PSC_MR_RXIRQ              (0x40)
++#define MCF_PSC_MR_RXRTS              (0x80)
++#define MCF_PSC_MR_SB(x)              (((x)&0x0F)<<0)
++#define MCF_PSC_MR_TXCTS              (0x10)
++#define MCF_PSC_MR_TXRTS              (0x20)
++#define MCF_PSC_MR_CM(x)              (((x)&0x03)<<6)
++#define MCF_PSC_MR_PM_MULTI_ADDR      (0x1C)
++#define MCF_PSC_MR_PM_MULTI_DATA      (0x18)
++#define MCF_PSC_MR_PM_NONE            (0x10)
++#define MCF_PSC_MR_PM_FORCE_HI        (0x0C)
++#define MCF_PSC_MR_PM_FORCE_LO        (0x08)
++#define MCF_PSC_MR_PM_ODD             (0x04)
++#define MCF_PSC_MR_PM_EVEN            (0x00)
++#define MCF_PSC_MR_BC_5               (0x00)
++#define MCF_PSC_MR_BC_6               (0x01)
++#define MCF_PSC_MR_BC_7               (0x02)
++#define MCF_PSC_MR_BC_8               (0x03)
++#define MCF_PSC_MR_CM_NORMAL          (0x00)
++#define MCF_PSC_MR_CM_ECHO            (0x40)
++#define MCF_PSC_MR_CM_LOCAL_LOOP      (0x80)
++#define MCF_PSC_MR_CM_REMOTE_LOOP     (0xC0)
++#define MCF_PSC_MR_SB_STOP_BITS_1     (0x07)
++#define MCF_PSC_MR_SB_STOP_BITS_15    (0x08)
++#define MCF_PSC_MR_SB_STOP_BITS_2     (0x0F)
++
++/* Bit definitions and macros for MCF_PSC_SR */
++#define MCF_PSC_SR_ERR                (0x0040)
++#define MCF_PSC_SR_CDE_DEOF           (0x0080)
++#define MCF_PSC_SR_RXRDY              (0x0100)
++#define MCF_PSC_SR_FU                 (0x0200)
++#define MCF_PSC_SR_TXRDY              (0x0400)
++#define MCF_PSC_SR_TXEMP_URERR        (0x0800)
++#define MCF_PSC_SR_OE                 (0x1000)
++#define MCF_PSC_SR_PE_CRCERR          (0x2000)
++#define MCF_PSC_SR_FE_PHYERR          (0x4000)
++#define MCF_PSC_SR_RB_NEOF            (0x8000)
++
++/* Bit definitions and macros for MCF_PSC_CSR */
++#define MCF_PSC_CSR_TCSEL(x)          (((x)&0x0F)<<0)
++#define MCF_PSC_CSR_RCSEL(x)          (((x)&0x0F)<<4)
++#define MCF_PSC_CSR_RCSEL_SYS_CLK     (0xD0)
++#define MCF_PSC_CSR_RCSEL_CTM16       (0xE0)
++#define MCF_PSC_CSR_RCSEL_CTM         (0xF0)
++#define MCF_PSC_CSR_TCSEL_SYS_CLK     (0x0D)
++#define MCF_PSC_CSR_TCSEL_CTM16       (0x0E)
++#define MCF_PSC_CSR_TCSEL_CTM         (0x0F)
++
++/* Bit definitions and macros for MCF_PSC_CR */
++#define MCF_PSC_CR_RXC(x)             (((x)&0x03)<<0)
++#define MCF_PSC_CR_TXC(x)             (((x)&0x03)<<2)
++#define MCF_PSC_CR_MISC(x)            (((x)&0x07)<<4)
++#define MCF_PSC_CR_NONE               (0x00)
++#define MCF_PSC_CR_STOP_BREAK         (0x70)
++#define MCF_PSC_CR_START_BREAK        (0x60)
++#define MCF_PSC_CR_BKCHGINT           (0x50)
++#define MCF_PSC_CR_RESET_ERROR        (0x40)
++#define MCF_PSC_CR_RESET_TX           (0x30)
++#define MCF_PSC_CR_RESET_RX           (0x20)
++#define MCF_PSC_CR_RESET_MR           (0x10)
++#define MCF_PSC_CR_TX_DISABLED        (0x08)
++#define MCF_PSC_CR_TX_ENABLED         (0x04)
++#define MCF_PSC_CR_RX_DISABLED        (0x02)
++#define MCF_PSC_CR_RX_ENABLED         (0x01)
++
++/* Bit definitions and macros for MCF_PSC_TB_8BIT */
++#define MCF_PSC_TB_8BIT_TB3(x)        (((x)&0x000000FF)<<0)
++#define MCF_PSC_TB_8BIT_TB2(x)        (((x)&0x000000FF)<<8)
++#define MCF_PSC_TB_8BIT_TB1(x)        (((x)&0x000000FF)<<16)
++#define MCF_PSC_TB_8BIT_TB0(x)        (((x)&0x000000FF)<<24)
++
++/* Bit definitions and macros for MCF_PSC_TB_16BIT */
++#define MCF_PSC_TB_16BIT_TB1(x)       (((x)&0x0000FFFF)<<0)
++#define MCF_PSC_TB_16BIT_TB0(x)       (((x)&0x0000FFFF)<<16)
++
++/* Bit definitions and macros for MCF_PSC_TB_AC97 */
++#define MCF_PSC_TB_AC97_SOF           (0x00000800)
++#define MCF_PSC_TB_AC97_TB(x)         (((x)&0x000FFFFF)<<12)
++
++/* Bit definitions and macros for MCF_PSC_IPCR */
++#define MCF_PSC_IPCR_RESERVED         (0x0C)
++#define MCF_PSC_IPCR_CTS              (0x0D)
++#define MCF_PSC_IPCR_D_CTS            (0x1C)
++#define MCF_PSC_IPCR_SYNC             (0x8C)
++
++/* Bit definitions and macros for MCF_PSC_ACR */
++#define MCF_PSC_ACR_IEC0              (0x01)
++#define MCF_PSC_ACR_CTMS(x)           (((x)&0x07)<<4)
++#define MCF_PSC_ACR_BRG               (0x80)
++
++/* Bit definitions and macros for MCF_PSC_ISR */
++#define MCF_PSC_ISR_ERR               (0x0040)
++#define MCF_PSC_ISR_DEOF              (0x0080)
++#define MCF_PSC_ISR_TXRDY             (0x0100)
++#define MCF_PSC_ISR_RXRDY_FU          (0x0200)
++#define MCF_PSC_ISR_DB                (0x0400)
++#define MCF_PSC_ISR_IPC               (0x8000)
++
++/* Bit definitions and macros for MCF_PSC_IMR */
++#define MCF_PSC_IMR_ERR               (0x0040)
++#define MCF_PSC_IMR_DEOF              (0x0080)
++#define MCF_PSC_IMR_TXRDY             (0x0100)
++#define MCF_PSC_IMR_RXRDY_FU          (0x0200)
++#define MCF_PSC_IMR_DB                (0x0400)
++#define MCF_PSC_IMR_IPC               (0x8000)
++
++/* Bit definitions and macros for MCF_PSC_IP */
++#define MCF_PSC_IP_CTS                (0x01)
++#define MCF_PSC_IP_TGL                (0x40)
++#define MCF_PSC_IP_LWPR_B             (0x80)
++
++/* Bit definitions and macros for MCF_PSC_OPSET */
++#define MCF_PSC_OPSET_RTS             (0x01)
++
++/* Bit definitions and macros for MCF_PSC_OPRESET */
++#define MCF_PSC_OPRESET_RTS           (0x01)
++
++/* Bit definitions and macros for MCF_PSC_SICR */
++#define MCF_PSC_SICR_SIM(x)           (((x)&0x07)<<0)
++#define MCF_PSC_SICR_SHDIR            (0x10)
++#define MCF_PSC_SICR_DTS              (0x20)
++#define MCF_PSC_SICR_AWR              (0x40)
++#define MCF_PSC_SICR_ACRB             (0x80)
++#define MCF_PSC_SICR_SIM_UART         (0x00)
++#define MCF_PSC_SICR_SIM_MODEM8       (0x01)
++#define MCF_PSC_SICR_SIM_MODEM16      (0x02)
++#define MCF_PSC_SICR_SIM_AC97         (0x03)
++#define MCF_PSC_SICR_SIM_SIR          (0x04)
++#define MCF_PSC_SICR_SIM_MIR          (0x05)
++#define MCF_PSC_SICR_SIM_FIR          (0x06)
++
++/* Bit definitions and macros for MCF_PSC_IRCR1 */
++#define MCF_PSC_IRCR1_SPUL            (0x01)
++#define MCF_PSC_IRCR1_SIPEN           (0x02)
++#define MCF_PSC_IRCR1_FD              (0x04)
++
++/* Bit definitions and macros for MCF_PSC_IRCR2 */
++#define MCF_PSC_IRCR2_NXTEOF          (0x01)
++#define MCF_PSC_IRCR2_ABORT           (0x02)
++#define MCF_PSC_IRCR2_SIPREQ          (0x04)
++
++/* Bit definitions and macros for MCF_PSC_IRMDR */
++#define MCF_PSC_IRMDR_M_FDIV(x)       (((x)&0x7F)<<0)
++#define MCF_PSC_IRMDR_FREQ            (0x80)
++
++/* Bit definitions and macros for MCF_PSC_IRFDR */
++#define MCF_PSC_IRFDR_F_FDIV(x)       (((x)&0x0F)<<0)
++
++/* Bit definitions and macros for MCF_PSC_RFCNT */
++#define MCF_PSC_RFCNT_CNT(x)          (((x)&0x01FF)<<0)
++
++/* Bit definitions and macros for MCF_PSC_TFCNT */
++#define MCF_PSC_TFCNT_CNT(x)          (((x)&0x01FF)<<0)
++
++/* Bit definitions and macros for MCF_PSC_RFSR */
++#define MCF_PSC_RFSR_EMT              (0x0001)
++#define MCF_PSC_RFSR_ALARM            (0x0002)
++#define MCF_PSC_RFSR_FU               (0x0004)
++#define MCF_PSC_RFSR_FRMRY            (0x0008)
++#define MCF_PSC_RFSR_OF               (0x0010)
++#define MCF_PSC_RFSR_UF               (0x0020)
++#define MCF_PSC_RFSR_RXW              (0x0040)
++#define MCF_PSC_RFSR_FAE              (0x0080)
++#define MCF_PSC_RFSR_FRM(x)           (((x)&0x000F)<<8)
++#define MCF_PSC_RFSR_TAG              (0x1000)
++#define MCF_PSC_RFSR_TXW              (0x4000)
++#define MCF_PSC_RFSR_IP               (0x8000)
++#define MCF_PSC_RFSR_FRM_BYTE0        (0x0800)
++#define MCF_PSC_RFSR_FRM_BYTE1        (0x0400)
++#define MCF_PSC_RFSR_FRM_BYTE2        (0x0200)
++#define MCF_PSC_RFSR_FRM_BYTE3        (0x0100)
++
++/* Bit definitions and macros for MCF_PSC_TFSR */
++#define MCF_PSC_TFSR_EMT              (0x0001)
++#define MCF_PSC_TFSR_ALARM            (0x0002)
++#define MCF_PSC_TFSR_FU               (0x0004)
++#define MCF_PSC_TFSR_FRMRY            (0x0008)
++#define MCF_PSC_TFSR_OF               (0x0010)
++#define MCF_PSC_TFSR_UF               (0x0020)
++#define MCF_PSC_TFSR_RXW              (0x0040)
++#define MCF_PSC_TFSR_FAE              (0x0080)
++#define MCF_PSC_TFSR_FRM(x)           (((x)&0x000F)<<8)
++#define MCF_PSC_TFSR_TAG              (0x1000)
++#define MCF_PSC_TFSR_TXW              (0x4000)
++#define MCF_PSC_TFSR_IP               (0x8000)
++#define MCF_PSC_TFSR_FRM_BYTE0        (0x0800)
++#define MCF_PSC_TFSR_FRM_BYTE1        (0x0400)
++#define MCF_PSC_TFSR_FRM_BYTE2        (0x0200)
++#define MCF_PSC_TFSR_FRM_BYTE3        (0x0100)
++
++/* Bit definitions and macros for MCF_PSC_RFCR */
++#define MCF_PSC_RFCR_CNTR(x)          (((x)&0x0000FFFF)<<0)
++#define MCF_PSC_RFCR_TXW_MSK          (0x00040000)
++#define MCF_PSC_RFCR_OF_MSK           (0x00080000)
++#define MCF_PSC_RFCR_UF_MSK           (0x00100000)
++#define MCF_PSC_RFCR_RXW_MSK          (0x00200000)
++#define MCF_PSC_RFCR_FAE_MSK          (0x00400000)
++#define MCF_PSC_RFCR_IP_MSK           (0x00800000)
++#define MCF_PSC_RFCR_GR(x)            (((x)&0x00000007)<<24)
++#define MCF_PSC_RFCR_FRMEN            (0x08000000)
++#define MCF_PSC_RFCR_TIMER            (0x10000000)
++#define MCF_PSC_RFCR_WRITETAG         (0x20000000)
++#define MCF_PSC_RFCR_SHADOW           (0x80000000)
++
++/* Bit definitions and macros for MCF_PSC_TFCR */
++#define MCF_PSC_TFCR_CNTR(x)          (((x)&0x0000FFFF)<<0)
++#define MCF_PSC_TFCR_TXW_MSK          (0x00040000)
++#define MCF_PSC_TFCR_OF_MSK           (0x00080000)
++#define MCF_PSC_TFCR_UF_MSK           (0x00100000)
++#define MCF_PSC_TFCR_RXW_MSK          (0x00200000)
++#define MCF_PSC_TFCR_FAE_MSK          (0x00400000)
++#define MCF_PSC_TFCR_IP_MSK           (0x00800000)
++#define MCF_PSC_TFCR_GR(x)            (((x)&0x00000007)<<24)
++#define MCF_PSC_TFCR_FRMEN            (0x08000000)
++#define MCF_PSC_TFCR_TIMER            (0x10000000)
++#define MCF_PSC_TFCR_WRITETAG         (0x20000000)
++#define MCF_PSC_TFCR_SHADOW           (0x80000000)
++
++/* Bit definitions and macros for MCF_PSC_RFAR */
++#define MCF_PSC_RFAR_ALARM(x)         (((x)&0x01FF)<<0)
++
++/* Bit definitions and macros for MCF_PSC_TFAR */
++#define MCF_PSC_TFAR_ALARM(x)         (((x)&0x01FF)<<0)
++
++/* Bit definitions and macros for MCF_PSC_RFRP */
++#define MCF_PSC_RFRP_READ(x)          (((x)&0x01FF)<<0)
++
++/* Bit definitions and macros for MCF_PSC_TFRP */
++#define MCF_PSC_TFRP_READ(x)          (((x)&0x01FF)<<0)
++
++/* Bit definitions and macros for MCF_PSC_RFWP */
++#define MCF_PSC_RFWP_WRITE(x)         (((x)&0x01FF)<<0)
++
++/* Bit definitions and macros for MCF_PSC_TFWP */
++#define MCF_PSC_TFWP_WRITE(x)         (((x)&0x01FF)<<0)
++
++/* Bit definitions and macros for MCF_PSC_RLRFP */
++#define MCF_PSC_RLRFP_LFP(x)          (((x)&0x01FF)<<0)
++
++/* Bit definitions and macros for MCF_PSC_TLRFP */
++#define MCF_PSC_TLRFP_LFP(x)          (((x)&0x01FF)<<0)
++
++/* Bit definitions and macros for MCF_PSC_RLWFP */
++#define MCF_PSC_RLWFP_LFP(x)          (((x)&0x01FF)<<0)
++
++/* Bit definitions and macros for MCF_PSC_TLWFP */
++#define MCF_PSC_TLWFP_LFP(x)          (((x)&0x01FF)<<0)
++
++/********************************************************************/
++
++#endif /* __MCF548X_PSC_H__ */
+--- /dev/null
++++ b/include/asm-m68k/m5485sim.h
+@@ -0,0 +1,219 @@
++/*
++ *	m5485sim.h -- ColdFire 547x/548x System Integration Unit support.
++ */
++ 
++#ifndef	m5485sim_h
++#define	m5485sim_h
++
++
++/*
++ *      System Integration Unit Registers
++ */
++#define MCF_SDRAMDS	MCF_REG32(0x000004)	/* SDRAM Drive Strength 	*/
++#define MCF_SBCR       	MCF_REG32(0x000010)	/* System Breakpoint Control 	*/
++#define MCF_CSnCFG(x)	MCF_REG32(0x000020+(x*4))/* SDRAM Chip Select X		*/
++#define MCF_SECSACR     MCF_REG32(0x000038)	/* Sequential Access Control 	*/	
++#define MCF_RSR         MCF_REG32(0x000044)	/* Reset Status 		*/
++#define MCF_JTAGID      MCF_REG32(0x000050)	/* JTAG Device Identification 	*/
++
++/*
++ *      FlexBus Chip Selects Registers
++ */
++#define MCF_CSARn(x)    MCF_REG32(0x000500+(x*0xC))
++#define MCF_CSMRn(x)    MCF_REG32(0x000504+(x*0xC))
++#define MCF_CSCRn(x)    MCF_REG32(0x000508+(x*0xC))
++
++/*
++ *      Interrupt Controller Registers
++ */
++#define MCF_IPRH      	MCF_REG32(0x000700)
++#define MCF_IPRL      	MCF_REG32(0x000704)
++#define MCF_IMRH      	MCF_REG32(0x000708)
++#define MCF_IMRL      	MCF_REG32(0x00070C)
++#define MCF_INTFRCH   	MCF_REG32(0x000710)
++#define MCF_INTFRCL   	MCF_REG32(0x000714)
++#define MCF_IRLR      	MCF_REG08(0x000718)
++#define MCF_IACKLPR   	MCF_REG08(0x000719)
++#define MCF_SWIACK    	MCF_REG08(0x0007E0)
++#define MCF_LnIACK(x) 	MCF_REG08(0x0007E4+((x)*0x004))
++#define MCF_ICR(x)    	MCF_REG08(0x000740+((x)*0x001))
++
++/*
++ *	Slice Timers Registers
++ */
++#define MCF_SLTCNT(x)   MCF_REG32(0x000900+((x)*0x010))
++#define MCF_SCR(x)      MCF_REG32(0x000904+((x)*0x010))
++#define MCF_SCNT(x)     MCF_REG32(0x000908+((x)*0x010))
++#define MCF_SSR(x)      MCF_REG32(0x00090C+((x)*0x010))
++
++/*
++ *	Interrupt sources
++ */
++#define ISC_EPORT_Fn(x)		(x) 		/* EPORT Interrupts 	*/
++#define ISC_USB_EPn(x)		(15+(x))	/* USB Endopint 	*/
++#define ISC_USB_ISR		(22) 		/* USB General source 	*/
++#define ISC_USB_AISR		(22) 		/* USB core source 	*/
++#define ISC_DSPI_OVRFW		(25)		/* DSPI overflow 	*/
++#define ISC_DSPI_RFOF		(26)		
++#define ISC_DSPI_RFDF		(27)		
++#define ISC_DSPI_TFUF		(28)		
++#define ISC_DSPI_TCF		(29)		
++#define ISC_DSPI_TFFF		(30)		
++#define ISC_DSPI_EOQF		(31)		
++#define ISC_PSCn(x)		(35-(x))		
++#define ISC_COMM_TIM		(36)		
++#define ISC_SEC			(37)		
++#define ISC_FEC1		(38)		
++#define ISC_FEC0		(39)		
++#define ISC_I2C			(40)		
++#define ISC_PCI_ARB		(41)		
++#define ISC_PCI_CB		(42)		
++#define ISC_PCI_XLB		(43)		
++#define ISC_DMA			(48)		
++#define ISC_CANn_ERR(x)		(49+(6*(x)))		
++#define ISC_CANn_BUSOFF(x)	(50+(6*(x)))		
++#define ISC_CANn_MBOR(x)	(51+(6*(x)))		
++#define ISC_CAN0_WAKEIN		(52)		
++#define ISC_SLTn(x)		(54-(x))		
++#define ISC_GPTn(x)		(62-(x))		
++
++/*
++ *	Interrupt level and priorities
++ */
++#define ILP_TOP			(MCF_ICR_IL(5) | MCF_ICR_IP(3))
++#define ILP_SLT0		(MCF_ICR_IL(5) | MCF_ICR_IP(2))
++#define ILP_SLT1		(MCF_ICR_IL(5) | MCF_ICR_IP(1))
++#define ILP_DMA			(MCF_ICR_IL(5) | MCF_ICR_IP(0))
++#define ILP_SEC			(MCF_ICR_IL(4) | MCF_ICR_IP(7))
++#define ILP_FEC0		(MCF_ICR_IL(4) | MCF_ICR_IP(6))
++#define ILP_FEC1		(MCF_ICR_IL(4) | MCF_ICR_IP(5))
++#define ILP_PCI_XLB		(MCF_ICR_IL(4) | MCF_ICR_IP(4))
++#define ILP_PCI_ARB		(MCF_ICR_IL(4) | MCF_ICR_IP(3))
++#define ILP_PCI_CB		(MCF_ICR_IL(4) | MCF_ICR_IP(2))
++#define ILP_I2C			(MCF_ICR_IL(4) | MCF_ICR_IP(1))
++
++#define ILP_USB_EPn(x)		(MCF_ICR_IL(3) | MCF_ICR_IP(7-(x)))
++#define ILP_USB_EP0		(MCF_ICR_IL(3) | MCF_ICR_IP(7))
++#define ILP_USB_EP1		(MCF_ICR_IL(3) | MCF_ICR_IP(6))
++#define ILP_USB_EP2		(MCF_ICR_IL(3) | MCF_ICR_IP(5))
++#define ILP_USB_EP3		(MCF_ICR_IL(3) | MCF_ICR_IP(4))
++#define ILP_USB_EP4		(MCF_ICR_IL(3) | MCF_ICR_IP(3))
++#define ILP_USB_EP5		(MCF_ICR_IL(3) | MCF_ICR_IP(2))
++#define ILP_USB_EP6		(MCF_ICR_IL(3) | MCF_ICR_IP(1))
++#define ILP_USB_ISR		(MCF_ICR_IL(3) | MCF_ICR_IP(0))
++
++#define ILP_USB_AISR		(MCF_ICR_IL(2) | MCF_ICR_IP(7))
++#define ILP_DSPI_OVRFW		(MCF_ICR_IL(2) | MCF_ICR_IP(6))
++#define ILP_DSPI_RFOF		(MCF_ICR_IL(2) | MCF_ICR_IP(5))
++#define ILP_DSPI_RFDF		(MCF_ICR_IL(2) | MCF_ICR_IP(4))
++#define ILP_DSPI_TFUF		(MCF_ICR_IL(2) | MCF_ICR_IP(3))
++#define ILP_DSPI_TCF		(MCF_ICR_IL(2) | MCF_ICR_IP(2))
++#define ILP_DSPI_TFFF		(MCF_ICR_IL(2) | MCF_ICR_IP(1))
++#define ILP_DSPI_EOQF		(MCF_ICR_IL(2) | MCF_ICR_IP(0))
++
++#define ILP_COMM_TIM		(MCF_ICR_IL(1) | MCF_ICR_IP(7))
++#define ILP_PSCn(x)		(MCF_ICR_IL(1) | MCF_ICR_IP(3-((x)&3)))
++#define ILP_PSC0		(MCF_ICR_IL(1) | MCF_ICR_IP(3))
++#define ILP_PSC1		(MCF_ICR_IL(1) | MCF_ICR_IP(2))
++#define ILP_PSC2		(MCF_ICR_IL(1) | MCF_ICR_IP(1))
++#define ILP_PSC3		(MCF_ICR_IL(1) | MCF_ICR_IP(0))
++
++
++
++
++
++/********************************************************************/
++
++/*
++ *      System Integration Unit Bitfields
++ */
++ 
++/* SBCR */
++#define MCF_SBCR_PIN2DSPI       (0x08000000)
++#define MCF_SBCR_DMA2CPU        (0x10000000)
++#define MCF_SBCR_CPU2DMA        (0x20000000)
++#define MCF_SBCR_PIN2DMA        (0x40000000)
++#define MCF_SBCR_PIN2CPU        (0x80000000)
++
++/* SECSACR */
++#define MCF_SECSACR_SEQEN       (0x00000001)
++
++/* RSR */
++#define MCF_RSR_RST             (0x00000001)
++#define MCF_RSR_RSTWD           (0x00000002)
++#define MCF_RSR_RSTJTG          (0x00000008)
++
++/* JTAGID */
++#define MCF_JTAGID_REV          (0xF0000000)
++#define MCF_JTAGID_PROCESSOR    (0x0FFFFFFF)
++#define MCF_JTAGID_MCF5485      (0x0800C01D)
++#define MCF_JTAGID_MCF5484      (0x0800D01D)
++#define MCF_JTAGID_MCF5483      (0x0800E01D)
++#define MCF_JTAGID_MCF5482      (0x0800F01D)
++#define MCF_JTAGID_MCF5481      (0x0801001D)
++#define MCF_JTAGID_MCF5480      (0x0801101D)
++#define MCF_JTAGID_MCF5475      (0x0801201D)
++#define MCF_JTAGID_MCF5474      (0x0801301D)
++#define MCF_JTAGID_MCF5473      (0x0801401D)
++#define MCF_JTAGID_MCF5472      (0x0801501D)
++#define MCF_JTAGID_MCF5471      (0x0801601D)
++#define MCF_JTAGID_MCF5470      (0x0801701D)
++
++
++/*
++ *      Interrupt Controller Bitfields
++ */
++#define MCF_IRLR_IRQ(x)         (((x)&0x7F)<<1)
++#define MCF_IACKLPR_PRI(x)      (((x)&0x0F)<<0)
++#define MCF_IACKLPR_LEVEL(x)    (((x)&0x07)<<4)
++#define MCF_ICR_IP(x)           (((x)&0x07)<<0)
++#define MCF_ICR_IL(x)           (((x)&0x07)<<3)
++
++/*
++ *      Slice Timers Bitfields
++ */
++#define MCF_SCR_TEN    		(0x01000000)
++#define MCF_SCR_IEN    		(0x02000000)
++#define MCF_SCR_RUN    		(0x04000000)
++#define MCF_SSR_ST     		(0x01000000)
++#define MCF_SSR_BE     		(0x02000000)
++
++
++/*
++ * Some needed coldfire registers
++ */
++#define MCF_PAR_PCIBG 		   MCF_REG16(0x000A48)
++#define MCF_PAR_PCIBR   	   MCF_REG16(0x000A4A)
++#define MCF_PAR_PSCn(x)            MCF_REG08(0x000A4F-((x)&0x3))
++#define MCF_PAR_FECI2CIRQ   	   MCF_REG16(0x000A44)
++#define MCF_EPPAR       	   MCF_REG16(0x000F00)
++#define MCF_EPIER       	   MCF_REG08(0x000F05)
++#define MCF_EPFR       	   	   MCF_REG08(0x000F0C)
++
++/*
++ * Some GPIO bitfields
++ */
++#define MCF_PAR_SDA			(0x0008)
++#define MCF_PAR_SCL			(0x0004)
++#define MCF_PAR_PSC_TXD             	(0x04)
++#define MCF_PAR_PSC_RXD             	(0x08)
++#define MCF_PAR_PSC_RTS(x)          	(((x)&0x03)<<4)
++#define MCF_PAR_PSC_CTS(x)          	(((x)&0x03)<<6)
++#define MCF_PAR_PSC_CTS_GPIO        	(0x00)
++#define MCF_PAR_PSC_CTS_BCLK        	(0x80)
++#define MCF_PAR_PSC_CTS_CTS         	(0xC0)
++#define MCF_PAR_PSC_RTS_GPIO        	(0x00)
++#define MCF_PAR_PSC_RTS_FSYNC       	(0x20)
++#define MCF_PAR_PSC_RTS_RTS         	(0x30)
++#define MCF_PAR_PSC_CANRX		(0x40)
++
++
++/*
++ * Some used coldfire values
++ */
++#define MCF_EPIER_EPIE(x)          (0x01 << (x))
++#define MCF_EPPAR_EPPAx_FALLING    (2)
++#define MCF_EPPAR_EPPA(n,x)        (((x)&0x0003) << (2*n))
++
++
++#endif	/* m5485sim_h */
+--- a/include/asm-m68k/mcfsim.h
++++ b/include/asm-m68k/mcfsim.h
+@@ -20,6 +20,11 @@
+ #include <asm/mcf5445x_pci.h>
+ #include <asm/mcf5445x_pciarb.h>
+ #include <asm/mcf5445x_eport.h>
++#include <asm/mcf5445x_fbcs.h>
++#include <asm/mcf5445x_xbs.h>
++#include <asm/mcf5445x_dtim.h>
++#elif defined(CONFIG_M547X_8X)
++#include <asm/m5485sim.h>
+ #endif
+ 
+ /*
+--- a/include/asm-m68k/mcfuart.h
++++ b/include/asm-m68k/mcfuart.h
+@@ -22,6 +22,15 @@
+ #define MCFUART_BASE3		0xfc068000	/* Base address of UART3 */
+ #define MCFINT_VECBASE		64
+ #define MCFINT_UART0		26
++
++#elif defined(CONFIG_M547X_8X)
++
++#define MCFUART_BASE1		0x8600		/* Base address of UART1 */
++#define MCFUART_BASE2		0x8700		/* Base address of UART2 */
++#define MCFUART_BASE3		0x8800		/* Base address of UART3 */
++#define MCFUART_BASE4		0x8900		/* Base address of UART4 */
++#define MCFINT_VECBASE		64
++#define MCFINT_UART0		35
+ #endif
+ 
+ 
+@@ -97,6 +106,11 @@
+ #define	MCFUART_USR_RXFULL	0x02		/* Receiver full */
+ #define	MCFUART_USR_RXREADY	0x01		/* Receiver ready */
+ 
++#if defined(CONFIG_M547X_8X)
++#define	MCFUART_USR_TXREADY_BN	0x0a
++#define	MCFUART_USR_TXEMPTY_BN	0x0b
++#endif
++
+ #define	MCFUART_USR_RXERR	(MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
+ 				MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
+ 
+--- a/include/asm-m68k/mmu_context.h
++++ b/include/asm-m68k/mmu_context.h
+@@ -152,6 +152,7 @@ static inline void activate_mm(struct mm
+ 
+ #else /* CONFIG_COLDFIRE */
+ 
++#include <asm/coldfire.h>
+ #include <asm/atomic.h>
+ #include <asm/bitops.h>
+ #include <asm/mmu.h>
+@@ -227,6 +228,77 @@ static inline void activate_mm(struct mm
+ #define deactivate_mm(tsk, mm) do { } while (0)
+ 
+ extern void mmu_context_init(void);
++#if defined(CONFIG_M547X_8X)
++#define prepare_arch_switch(next) load_ksp_mmu(next)
++
++static inline void load_ksp_mmu(struct task_struct *task)
++{
++	int flags;
++	struct mm_struct *mm;
++	int asid;
++	pgd_t *pgd;
++	pmd_t *pmd;
++	pte_t *pte;
++	unsigned long mmuar;
++
++	local_irq_save(flags);
++	mmuar = task->thread.ksp;
++
++	/* Search for a valid TLB entry, if one is found, don't remap */
++	*MMUAR = mmuar;
++	*MMUOR = MMUOR_STLB | MMUOR_ADR;
++	if ((*MMUSR) & MMUSR_HIT)
++		goto end;
++
++	if (mmuar >= PAGE_OFFSET) {
++		mm = &init_mm;
++	} else {
++		printk ("load_ksp_mmu: non-kernel mm found: 0x%08x\n", (unsigned int) task->mm);
++		mm = task->mm;
++	}
++
++        if (!mm)
++	    goto bug;
++
++        pgd = pgd_offset(mm, mmuar);
++        if (pgd_none(*pgd))
++	    goto bug;
++	    
++    	pmd = pmd_offset(pgd, mmuar);
++    	if (pmd_none(*pmd))
++	    goto bug;
++    	
++	pte = (mmuar >= PAGE_OFFSET) ? pte_offset_kernel(pmd, mmuar)
++	                             : pte_offset_map(pmd, mmuar);
++    	if (pte_none(*pte) || !pte_present(*pte))
++	    goto bug;
++
++        set_pte(pte, pte_mkyoung(*pte));
++        asid = mm->context & 0xff;
++        if (!pte_dirty(*pte) && mmuar<=PAGE_OFFSET)
++    	    set_pte(pte, pte_wrprotect(*pte));
++
++        *MMUTR = (mmuar & PAGE_MASK) | (asid << CF_ASID_MMU_SHIFT)
++               | (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK ) >> CF_PAGE_MMUTR_SHIFT)
++               | MMUTR_V;
++
++        *MMUDR = (pte_val(*pte) & PAGE_MASK) 
++	       | ((pte->pte) & CF_PAGE_MMUDR_MASK)
++               | MMUDR_SZ8K | MMUDR_X;
++	    
++	*MMUOR = MMUOR_ACC | MMUOR_UAA;
++	asm ("nop");
++
++	goto end;
++
++bug:
++	printk ("ksp load failed: mm=0x%08x ksp=0x%08x\n", (unsigned int) mm, (unsigned int) mmuar);
++
++end:
++	local_irq_restore(flags);
++}
++
++#endif /* CONFIG_M547X_8X */
+ 
+ #endif /* CONFIG_COLDFIRE */
+ #endif
+--- a/include/asm-m68k/page_offset.h
++++ b/include/asm-m68k/page_offset.h
+@@ -5,7 +5,12 @@
+ #elif defined(CONFIG_SUN3)
+ #define PAGE_OFFSET_RAW		0x0E000000
+ #else /* CONFIG_COLDFIRE */
++#if defined(CONFIG_M54455)
+ #define PAGE_OFFSET_RAW		0xC0000000
+ #define	PHYS_OFFSET		0x40000000
++#elif defined(CONFIG_M547X_8X)
++#define PAGE_OFFSET_RAW		0xC0000000
++#define	PHYS_OFFSET		0x00000000
++#endif
+ #endif
+ 
diff --git a/target/linux/coldfire/patches/045-m547x_8x_fec_dma.patch b/target/linux/coldfire/patches/045-m547x_8x_fec_dma.patch
new file mode 100644
index 0000000000..ed54cbc2c2
--- /dev/null
+++ b/target/linux/coldfire/patches/045-m547x_8x_fec_dma.patch
@@ -0,0 +1,7283 @@
+From b778a60aba67d29857fc7016c8c2f2d87a23de1f Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Sun, 9 Mar 2008 22:14:05 -0600
+Subject: [PATCH] Add DMA and FEC.
+
+LTIBName: m547x-8x-fec-dma
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/Kconfig            |    9 +
+ arch/m68k/coldfire/Makefile  |    2 +
+ arch/m68k/coldfire/dma.c     |  537 +++++++++
+ drivers/Makefile             |    2 +
+ drivers/dma/MCD_dma.h        |  408 +++++++
+ drivers/dma/MCD_dmaApi.c     |  968 +++++++++++++++++
+ drivers/dma/MCD_progCheck.h  |   33 +
+ drivers/dma/MCD_tasks.c      | 2452 ++++++++++++++++++++++++++++++++++++++++++
+ drivers/dma/MCD_tasksInit.c  |  284 +++++
+ drivers/dma/MCD_tasksInit.h  |   73 ++
+ drivers/dma/Makefile         |    2 +
+ drivers/net/Kconfig          |    2 +
+ drivers/net/Makefile         |    2 +
+ drivers/net/fec/Kconfig      |   25 +
+ drivers/net/fec/Makefile     |    7 +
+ drivers/net/fec/fec.c        | 1375 +++++++++++++++++++++++
+ drivers/net/fec/fec.h        |  162 +++
+ drivers/net/fec/ks8721.c     |  125 +++
+ drivers/net/fec/ks8721.h     |   21 +
+ include/asm-m68k/MCD_dma.h   |  408 +++++++
+ include/asm-m68k/coldfire.h  |    1 +
+ include/asm-m68k/dma.h       |  106 ++-
+ include/asm-m68k/m5485dma.h  |   97 ++
+ include/asm-m68k/m5485sram.h |   12 +
+ 24 files changed, 7112 insertions(+), 1 deletions(-)
+ create mode 100644 arch/m68k/coldfire/dma.c
+ create mode 100644 drivers/dma/MCD_dma.h
+ create mode 100644 drivers/dma/MCD_dmaApi.c
+ create mode 100644 drivers/dma/MCD_progCheck.h
+ create mode 100644 drivers/dma/MCD_tasks.c
+ create mode 100644 drivers/dma/MCD_tasksInit.c
+ create mode 100644 drivers/dma/MCD_tasksInit.h
+ create mode 100644 drivers/net/fec/Kconfig
+ create mode 100644 drivers/net/fec/Makefile
+ create mode 100755 drivers/net/fec/fec.c
+ create mode 100755 drivers/net/fec/fec.h
+ create mode 100644 drivers/net/fec/ks8721.c
+ create mode 100644 drivers/net/fec/ks8721.h
+ create mode 100644 include/asm-m68k/MCD_dma.h
+ create mode 100644 include/asm-m68k/m5485dma.h
+ create mode 100644 include/asm-m68k/m5485sram.h
+
+--- a/arch/m68k/Kconfig
++++ b/arch/m68k/Kconfig
+@@ -141,6 +141,15 @@ config CFV4E
+ 	select MMU_CFV4E if MMU
+ 	default y
+ 
++config MCD_DMA
++	bool "ColdFire MCD DMA support"
++	depends on CFV4E
++	default y
++	help
++	  This enables support for the ColdFire 547x/548x family
++	  multichannel DMA support.  Many drivers need it.
++	  If you want it, say Y
++
+ config AMIGA
+ 	bool "Amiga support"
+ 	depends on !MMU_SUN3
+--- a/arch/m68k/coldfire/Makefile
++++ b/arch/m68k/coldfire/Makefile
+@@ -10,3 +10,5 @@ endif
+ 
+ obj-$(CONFIG_PCI)	+= pci.o mcf5445x-pci.o iomap.o
+ obj-$(CONFIG_M54455)	+= mcf5445x-devices.o
++
++obj-$(CONFIG_MCD_DMA)	+= dma.o
+--- /dev/null
++++ b/arch/m68k/coldfire/dma.c
+@@ -0,0 +1,537 @@
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/mm.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/dma.h>
++#include <asm/coldfire.h>
++#include <asm/m5485sram.h>
++#include <asm/mcfsim.h>
++
++
++
++void dma_interrupt_handler(int irq, void *dev_id, struct pt_regs *regs);
++
++/* 
++ * This global keeps track of which initiators have been
++ * used of the available assignments.  Initiators 0-15 are
++ * hardwired.  Initiators 16-31 are multiplexed and controlled
++ * via the Initiatior Mux Control Registe (IMCR).  The
++ * assigned requestor is stored with the associated initiator
++ * number.
++ */
++static int used_reqs[32] = {
++	DMA_ALWAYS, DMA_DSPI_RX, DMA_DSPI_TX, DMA_DREQ0,
++	DMA_PSC0_RX, DMA_PSC0_TX, DMA_USBEP0, DMA_USBEP1,
++	DMA_USBEP2, DMA_USBEP3, DMA_PCI_TX, DMA_PCI_RX,
++	DMA_PSC1_RX, DMA_PSC1_TX, DMA_I2C_RX, DMA_I2C_TX,
++	0, 0, 0, 0,
++	0, 0, 0, 0,
++	0, 0, 0, 0,
++	0, 0, 0, 0
++};
++
++/*
++ * This global keeps track of which channels have been assigned
++ * to tasks.  This methology assumes that no single initiator
++ * will be tied to more than one task/channel
++ */
++static char used_channel[16] = {
++	-1, -1, -1, -1, -1, -1, -1, -1,
++	-1, -1, -1, -1, -1, -1, -1, -1
++};
++
++unsigned int connected_channel[16] = {
++	0, 0, 0, 0, 0, 0, 0, 0,
++	0, 0, 0, 0, 0, 0, 0, 0
++};
++
++/********************************************************************/
++/*
++ * Attempt to enable the provided Initiator in the Initiator
++ * Mux Control Register
++ *
++ * Parameters:
++ *  initiator   Initiator identifier
++ *
++ * Return Value:
++ *  1   if unable to make the assignment
++ *  0   successful
++ */
++int
++dma_set_initiator(int initiator)
++{
++	switch (initiator) {	/*
++				 * These initiators are always active 
++				 */
++	case DMA_ALWAYS:
++	case DMA_DSPI_RX:
++	case DMA_DSPI_TX:
++	case DMA_DREQ0:
++	case DMA_PSC0_RX:
++	case DMA_PSC0_TX:
++	case DMA_USBEP0:
++	case DMA_USBEP1:
++	case DMA_USBEP2:
++	case DMA_USBEP3:
++	case DMA_PCI_TX:
++	case DMA_PCI_RX:
++	case DMA_PSC1_RX:
++	case DMA_PSC1_TX:
++	case DMA_I2C_RX:
++	case DMA_I2C_TX:
++		break;
++
++	case DMA_FEC0_RX:
++		MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC16(3))
++		    | MCF_DMA_IMCR_SRC16_FEC0RX;
++		used_reqs[16] = DMA_FEC0_RX;
++		break;
++
++	case DMA_FEC0_TX:
++		MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC17(3))
++		    | MCF_DMA_IMCR_SRC17_FEC0TX;
++		used_reqs[17] = DMA_FEC0_TX;
++		break;
++
++	case DMA_FEC1_RX:
++		MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC20(3))
++		    | MCF_DMA_IMCR_SRC20_FEC1RX;
++		used_reqs[20] = DMA_FEC1_RX;
++		break;
++
++	case DMA_FEC1_TX:
++		if (used_reqs[21] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC21(3))
++			    | MCF_DMA_IMCR_SRC21_FEC1TX;
++			used_reqs[21] = DMA_FEC1_TX;
++		} else if (used_reqs[25] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC25(3))
++			    | MCF_DMA_IMCR_SRC25_FEC1TX;
++			used_reqs[25] = DMA_FEC1_TX;
++		} else if (used_reqs[31] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3))
++			    | MCF_DMA_IMCR_SRC31_FEC1TX;
++			used_reqs[31] = DMA_FEC1_TX;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_DREQ1:
++		if (used_reqs[29] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3))
++			    | MCF_DMA_IMCR_SRC29_DREQ1;
++			used_reqs[29] = DMA_DREQ1;
++		} else if (used_reqs[21] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC21(3))
++			    | MCF_DMA_IMCR_SRC21_DREQ1;
++			used_reqs[21] = DMA_DREQ1;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM0:
++		if (used_reqs[24] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC24(3))
++			    | MCF_DMA_IMCR_SRC24_CTM0;
++			used_reqs[24] = DMA_CTM0;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM1:
++		if (used_reqs[25] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC25(3))
++			    | MCF_DMA_IMCR_SRC25_CTM1;
++			used_reqs[25] = DMA_CTM1;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM2:
++		if (used_reqs[26] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC26(3))
++			    | MCF_DMA_IMCR_SRC26_CTM2;
++			used_reqs[26] = DMA_CTM2;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM3:
++		if (used_reqs[27] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC27(3))
++			    | MCF_DMA_IMCR_SRC27_CTM3;
++			used_reqs[27] = DMA_CTM3;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM4:
++		if (used_reqs[28] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3))
++			    | MCF_DMA_IMCR_SRC28_CTM4;
++			used_reqs[28] = DMA_CTM4;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM5:
++		if (used_reqs[29] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3))
++			    | MCF_DMA_IMCR_SRC29_CTM5;
++			used_reqs[29] = DMA_CTM5;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM6:
++		if (used_reqs[30] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC30(3))
++			    | MCF_DMA_IMCR_SRC30_CTM6;
++			used_reqs[30] = DMA_CTM6;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM7:
++		if (used_reqs[31] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3))
++			    | MCF_DMA_IMCR_SRC31_CTM7;
++			used_reqs[31] = DMA_CTM7;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_USBEP4:
++		if (used_reqs[26] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC26(3))
++			    | MCF_DMA_IMCR_SRC26_USBEP4;
++			used_reqs[26] = DMA_USBEP4;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_USBEP5:
++		if (used_reqs[27] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC27(3))
++			    | MCF_DMA_IMCR_SRC27_USBEP5;
++			used_reqs[27] = DMA_USBEP5;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_USBEP6:
++		if (used_reqs[28] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3))
++			    | MCF_DMA_IMCR_SRC28_USBEP6;
++			used_reqs[28] = DMA_USBEP6;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_PSC2_RX:
++		if (used_reqs[28] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3))
++			    | MCF_DMA_IMCR_SRC28_PSC2RX;
++			used_reqs[28] = DMA_PSC2_RX;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_PSC2_TX:
++		if (used_reqs[29] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3))
++			    | MCF_DMA_IMCR_SRC29_PSC2TX;
++			used_reqs[29] = DMA_PSC2_TX;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_PSC3_RX:
++		if (used_reqs[30] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC30(3))
++			    | MCF_DMA_IMCR_SRC30_PSC3RX;
++			used_reqs[30] = DMA_PSC3_RX;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_PSC3_TX:
++		if (used_reqs[31] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3))
++			    | MCF_DMA_IMCR_SRC31_PSC3TX;
++			used_reqs[31] = DMA_PSC3_TX;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	default:
++		return 1;
++	}
++	return 0;
++}
++
++/********************************************************************/
++/*
++ * Return the initiator number for the given requestor
++ *
++ * Parameters:
++ *  requestor   Initiator/Requestor identifier
++ *
++ * Return Value:
++ *  The initiator number (0-31) if initiator has been assigned
++ *  0 (always initiator) otherwise
++ */
++unsigned int
++dma_get_initiator(int requestor)
++{
++	u32 i;
++
++	for (i = 0; i < sizeof (used_reqs); ++i) {
++		if (used_reqs[i] == requestor)
++			return i;
++	}
++	return 0;
++}
++
++/********************************************************************/
++/*
++ * Remove the given initiator from the active list
++ *
++ * Parameters:
++ *  requestor   Initiator/Requestor identifier
++ */
++void
++dma_remove_initiator(int requestor)
++{
++	u32 i;
++
++	for (i = 0; i < sizeof (used_reqs); ++i) {
++		if (used_reqs[i] == requestor) {
++			used_reqs[i] = -1;
++			break;
++		}
++	}
++}
++
++/********************************************************************/
++/*
++ * Attempt to find an available channel for FEC and mark is as used
++ *
++ * Parameters:
++ *  requestor   Initiator/Requestor identifier
++ *
++ * Return Value:
++ *  First available channel (from 0 to 5) or -1 if they are all occupied
++ */
++int
++dma_set_channel_fec(int requestor)
++{
++	u32 i, t;
++
++#ifdef CONFIG_FEC_548x_ENABLE_FEC2
++	t = 4;
++#else
++	t = 2;
++#endif
++
++
++
++	for (i = 0; i < t ; ++i)
++		if (used_channel[i] == -1) {
++			used_channel[i] = requestor;
++			return i;
++		}
++	/* All channels taken */
++	return -1;
++}
++
++/********************************************************************/
++/*
++ * Attempt to find an available channel and mark is as used
++ *
++ * Parameters:
++ *  requestor   Initiator/Requestor identifier
++ *
++ * Return Value:
++ *  First available channel (from 6 to 15) or -1 if they are all occupied
++ */
++int
++dma_set_channel(int requestor)
++{
++	u32 i;
++#ifdef CONFIG_NET_FEC2
++	i = 4;
++#else
++	i = 2;
++#endif				
++
++	for (; i < 16; ++i)
++		if (used_channel[i] == -1) {
++			used_channel[i] = requestor;
++			return i;
++		}
++
++	/* All channels taken */
++	return -1;
++}
++
++/********************************************************************/
++/*
++ * Return the channel being initiated by the given requestor
++ *
++ * Parameters:
++ *  requestor   Initiator/Requestor identifier
++ */
++int
++dma_get_channel(int requestor)
++{
++	u32 i;
++
++	for (i = 0; i < sizeof (used_channel); ++i) {
++		if (used_channel[i] == requestor)
++			return i;
++	}
++	return -1;
++}
++
++/********************************************************************/
++/*
++ * Connects a channel with reference on your data 
++ *
++ * Parameters:
++ *  channel   channel number
++ *  reference addres of your data
++  */
++int
++dma_connect(int channel, int address)
++{
++	if ((channel < 16) && (channel >= 0))
++		connected_channel[channel] = address;
++	else
++		return -1;
++	return 0;
++}
++
++/********************************************************************/
++/*
++ * Disconnects a channel with reference on your data 
++ *
++ * Parameters:
++ *  channel   channel number
++*/
++int
++dma_disconnect(int channel)
++{
++	if ((channel < 16) && (channel >= 0))
++		connected_channel[channel] = 0;
++	else
++		return -1;
++	return 0;
++}
++
++/********************************************************************/
++/*
++ * Remove the channel being initiated by the given requestor from 
++ * the active list
++ *
++ * Parameters:
++ *  requestor   Initiator/Requestor identifier
++ */
++void
++dma_remove_channel(int requestor)
++{
++	u32 i;
++
++	for (i = 0; i < sizeof (used_channel); ++i) {
++		if (used_channel[i] == requestor) {
++			used_channel[i] = -1;
++			break;
++		}
++	}
++}
++
++/********************************************************************/
++/* 
++ * This is the catch-all interrupt handler for the mult-channel DMA 
++ */
++volatile u8 dma_iflag[16];
++u32 tx = 0;
++
++void
++dma_interrupt_handler(int irq, void *dev_id, struct pt_regs *regs)
++{
++	u32 i, interrupts/*, mask, temp*/;
++
++	/*
++	 * Determine which interrupt(s) triggered by AND'ing the 
++	 * pending interrupts with those that aren't masked.            
++	 */
++/*	mask = MCF_DMA_DIMR;
++	MCF_DMA_DIMR = 0xffffffff;
++*/
++	interrupts = MCF_DMA_DIPR;
++	MCF_DMA_DIPR |= interrupts;
++//	temp = interrupts;
++
++	//MCF_DMA_DIPR = interrupts;
++	for (i = 0; i < 16; ++i, interrupts >>= 1)
++		if (interrupts & 0x1)
++			if (connected_channel[i] != 0)
++				((void (*)(void)) (connected_channel[i])) ();
++
++/*	MCF_DMA_DIPR |= temp;
++	MCF_DMA_DIMR = mask;*/
++}
++
++void
++dma_remove_channel_by_number(int channel)
++{
++	if (channel < sizeof (used_channel) && channel >= 0)
++		used_channel[channel] = -1;
++}
++
++int __devinit
++dma_init()
++{
++	int result;
++	char *dma_version_str;
++
++	MCD_getVersion(&dma_version_str);
++	printk("Initialize %s\n", dma_version_str);
++
++	if (request_irq
++	    (64 + ISC_DMA, 
++	     dma_interrupt_handler, 
++	     IRQF_DISABLED, 
++	     "MCD-DMA", 
++	     NULL)) {
++		printk("Cannot allocate the DMA IRQ(48)\n");
++		return 1;
++	}
++
++	MCF_DMA_DIMR = 0;
++	MCF_DMA_DIPR = 0xFFFFFFFF;
++
++	MCF_ICR(ISC_DMA) = ILP_DMA;
++#if 0
++// JKM
++	enable_irq( 64 + ISC_DMA );
++#endif
++
++	result =
++	    MCD_initDma((dmaRegs *) (MCF_MBAR + 0x8000),
++			(void *) SYS_SRAM_DMA_START, MCD_RELOC_TASKS);
++	if (result != MCD_OK) {
++		printk("Cannot perform DMA initialization\n");
++		free_irq(64 + ISC_DMA, NULL);
++		return 1;
++	}
++
++	return 0;
++}
++
++device_initcall(dma_init);
++
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -93,3 +93,5 @@ obj-$(CONFIG_PPC_PS3)		+= ps3/
+ obj-$(CONFIG_OF)		+= of/
+ obj-$(CONFIG_SSB)		+= ssb/
+ obj-$(CONFIG_VIRTIO)		+= virtio/
++
++obj-$(CONFIG_MCD_DMA)		+= dma/
+--- /dev/null
++++ b/drivers/dma/MCD_dma.h
+@@ -0,0 +1,408 @@
++/*********************************************************************
++ *
++ * Copyright (C) 2004  Motorola, Inc.
++ *  MOTOROLA, INC. All Rights Reserved.
++ *  You are hereby granted a copyright license to use
++ *  the SOFTWARE so long as this entire notice is
++ *  retained without alteration in any modified and/or redistributed
++ *  versions, and that such modified versions are clearly identified
++ *  as such. No licenses are granted by implication, estoppel or
++ *  otherwise under any patents or trademarks of Motorola, Inc. This
++ *  software is provided on an "AS IS" basis and without warranty.
++ *
++ *  To the maximum extent permitted by applicable law, MOTOROLA
++ *  DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING
++ *  IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
++ *  PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE
++ *  SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY
++ *  ACCOMPANYING WRITTEN MATERIALS.
++ *
++ *  To the maximum extent permitted by applicable law, IN NO EVENT
++ *  SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING
++ *  WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
++ *  INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY
++ *  LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
++ *
++ *  Motorola assumes no responsibility for the maintenance and support
++ *  of this software
++ ********************************************************************/
++
++/*
++ * File:        MCD_dma.h
++ * Purpose:     Main header file for multi-channel DMA API.
++ *
++ * Notes:
++ *
++ * Modifications:
++ */
++#ifndef _MCD_API_H
++#define _MCD_API_H
++
++#include <asm/types.h>
++
++/*
++ * Turn Execution Unit tasks ON (#define) or OFF (#undef)
++ */
++#undef MCD_INCLUDE_EU
++
++/*
++ * Number of DMA channels
++ */
++#define NCHANNELS 16
++
++/*
++ * Total number of variants
++ */
++#ifdef MCD_INCLUDE_EU
++#define NUMOFVARIANTS   6
++#else
++#define NUMOFVARIANTS   4
++#endif
++
++/*
++ * Define sizes of the various tables
++ */
++#define TASK_TABLE_SIZE     (NCHANNELS*32)
++#define VAR_TAB_SIZE        (128)
++#define CONTEXT_SAVE_SIZE   (128)
++#define FUNCDESC_TAB_SIZE   (256)
++
++#ifdef MCD_INCLUDE_EU
++#define FUNCDESC_TAB_NUM    16
++#else
++#define FUNCDESC_TAB_NUM    1
++#endif
++
++
++#ifndef DEFINESONLY
++
++/*
++ * Portability typedefs
++ */
++ /*
++#ifndef s32
++typedef int s32;
++#endif
++#ifndef u32
++typedef unsigned int u32;
++#endif
++#ifndef s16
++typedef short s16;
++#endif
++#ifndef u16
++typedef unsigned short u16;
++#endif
++#ifndef s8
++typedef char s8;
++#endif
++#ifndef u8
++typedef unsigned char u8;
++#endif
++*/
++/*
++ * These structures represent the internal registers of the
++ * multi-channel DMA
++ */
++struct dmaRegs_s {
++   u32 taskbar;         /* task table base address register */
++   u32 currPtr;
++   u32 endPtr;
++   u32 varTablePtr;
++   u16 dma_rsvd0;
++   u16 ptdControl;      /* ptd control */
++   u32 intPending;      /* interrupt pending register */
++   u32 intMask;         /* interrupt mask register */
++   u16 taskControl[16]; /* task control registers */
++   u8  priority[32];    /* priority registers */
++   u32 initiatorMux;    /* initiator mux control */
++   u32 taskSize0;       /* task size control register 0. */
++   u32 taskSize1;       /* task size control register 1. */
++   u32 dma_rsvd1;       /* reserved */
++   u32 dma_rsvd2;       /* reserved */
++   u32 debugComp1;      /* debug comparator 1 */
++   u32 debugComp2;      /* debug comparator 2 */
++   u32 debugControl;    /* debug control */
++   u32 debugStatus;     /* debug status */
++   u32 ptdDebug;        /* priority task decode debug */
++   u32 dma_rsvd3[31];   /* reserved */
++};
++typedef volatile struct dmaRegs_s dmaRegs;
++
++#endif
++
++/*
++ * PTD contrl reg bits
++ */
++#define PTD_CTL_TSK_PRI         0x8000
++#define PTD_CTL_COMM_PREFETCH   0x0001
++
++/*
++ * Task Control reg bits and field masks
++ */
++#define TASK_CTL_EN             0x8000
++#define TASK_CTL_VALID          0x4000
++#define TASK_CTL_ALWAYS         0x2000
++#define TASK_CTL_INIT_MASK      0x1f00
++#define TASK_CTL_ASTRT          0x0080
++#define TASK_CTL_HIPRITSKEN     0x0040
++#define TASK_CTL_HLDINITNUM     0x0020
++#define TASK_CTL_ASTSKNUM_MASK  0x000f
++
++/*
++ * Priority reg bits and field masks
++ */
++#define PRIORITY_HLD            0x80
++#define PRIORITY_PRI_MASK       0x07
++
++/*
++ * Debug Control reg bits and field masks
++ */
++#define DBG_CTL_BLOCK_TASKS_MASK    0xffff0000
++#define DBG_CTL_AUTO_ARM            0x00008000
++#define DBG_CTL_BREAK               0x00004000
++#define DBG_CTL_COMP1_TYP_MASK      0x00003800
++#define DBG_CTL_COMP2_TYP_MASK      0x00000070
++#define DBG_CTL_EXT_BREAK           0x00000004
++#define DBG_CTL_INT_BREAK           0x00000002
++
++/*
++ * PTD Debug reg selector addresses
++ * This reg must be written with a value to show the contents of
++ * one of the desired internal register.
++ */
++#define PTD_DBG_REQ             0x00 /* shows the state of 31 initiators */
++#define PTD_DBG_TSK_VLD_INIT    0x01 /* shows which 16 tasks are valid and
++                                        have initiators asserted */
++
++
++/*
++ * General return values
++ */
++#define MCD_OK                   0
++#define MCD_ERROR               -1
++#define MCD_TABLE_UNALIGNED     -2
++#define MCD_CHANNEL_INVALID     -3
++
++/*
++ * MCD_initDma input flags
++ */
++#define MCD_RELOC_TASKS         0x00000001
++#define MCD_NO_RELOC_TASKS      0x00000000
++#define MCD_COMM_PREFETCH_EN    0x00000002  /* Commbus Prefetching - MCF547x/548x ONLY */
++
++/*
++ * MCD_dmaStatus Status Values for each channel
++ */
++#define MCD_NO_DMA  1 /* No DMA has been requested since reset */
++#define MCD_IDLE    2 /* DMA active, but the initiator is currently inactive */
++#define MCD_RUNNING 3 /* DMA active, and the initiator is currently active */
++#define MCD_PAUSED  4 /* DMA active but it is currently paused */
++#define MCD_HALTED  5 /* the most recent DMA has been killed with MCD_killTask() */
++#define MCD_DONE    6 /* the most recent DMA has completed. */
++
++
++/*
++ * MCD_startDma parameter defines
++ */
++
++/*
++ * Constants for the funcDesc parameter
++ */
++/* Byte swapping: */
++#define MCD_NO_BYTE_SWAP    0x00045670  /* to disable byte swapping. */
++#define MCD_BYTE_REVERSE    0x00076540  /* to reverse the bytes of each u32 of the DMAed data. */
++#define MCD_U16_REVERSE     0x00067450  /* to reverse the 16-bit halves of
++                                           each 32-bit data value being DMAed.*/
++#define MCD_U16_BYTE_REVERSE    0x00054760 /* to reverse the byte halves of each
++                                            16-bit half of each 32-bit data value DMAed */
++#define MCD_NO_BIT_REV  0x00000000  /* do not reverse the bits of each byte DMAed. */
++#define MCD_BIT_REV     0x00088880  /* reverse the bits of each byte DMAed */
++/* CRCing: */
++#define MCD_CRC16       0xc0100000  /* to perform CRC-16 on DMAed data. */
++#define MCD_CRCCCITT    0xc0200000  /* to perform CRC-CCITT on DMAed data. */
++#define MCD_CRC32       0xc0300000  /* to perform CRC-32 on DMAed data. */
++#define MCD_CSUMINET    0xc0400000  /* to perform internet checksums on DMAed data.*/
++#define MCD_NO_CSUM     0xa0000000  /* to perform no checksumming. */
++
++#define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | MCD_NO_CSUM)
++#define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM)
++
++/*
++ * Constants for the flags parameter
++ */
++#define MCD_TT_FLAGS_RL   0x00000001 /* Read line */
++#define MCD_TT_FLAGS_CW   0x00000002 /* Combine Writes */
++#define MCD_TT_FLAGS_SP   0x00000004 /* Speculative prefetch(XLB) MCF547x/548x ONLY  */
++#define MCD_TT_FLAGS_MASK 0x000000ff
++#define MCD_TT_FLAGS_DEF  (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW)
++
++#define MCD_SINGLE_DMA  0x00000100 /* Unchained DMA */
++#define MCD_CHAIN_DMA              /* TBD */
++#define MCD_EU_DMA                 /* TBD */
++#define MCD_FECTX_DMA   0x00001000 /* FEC TX ring DMA */
++#define MCD_FECRX_DMA   0x00002000 /* FEC RX ring DMA */
++
++
++/* these flags are valid for MCD_startDma and the chained buffer descriptors */
++#define MCD_BUF_READY   0x80000000 /* indicates that this buffer is now under the DMA's control */
++#define MCD_WRAP        0x20000000 /* to tell the FEC Dmas to wrap to the first BD */
++#define MCD_INTERRUPT   0x10000000 /* to generate an interrupt after completion of the DMA. */
++#define MCD_END_FRAME   0x08000000 /* tell the DMA to end the frame when transferring
++                                      last byte of data in buffer */
++#define MCD_CRC_RESTART 0x40000000 /* to empty out the accumulated checksum
++                                      prior to performing the DMA. */
++
++/* Defines for the FEC buffer descriptor control/status word*/
++#define MCD_FEC_BUF_READY   0x8000
++#define MCD_FEC_WRAP        0x2000
++#define MCD_FEC_INTERRUPT   0x1000
++#define MCD_FEC_END_FRAME   0x0800
++
++
++/*
++ * Defines for general intuitiveness
++ */
++
++#define MCD_TRUE  1
++#define MCD_FALSE 0
++
++/*
++ * Three different cases for destination and source.
++ */
++#define MINUS1          -1
++#define ZERO            0
++#define PLUS1           1
++
++#ifndef DEFINESONLY
++
++/* Task Table Entry struct*/
++typedef struct {
++    u32 TDTstart;   /* task descriptor table start */
++    u32 TDTend;     /* task descriptor table end */
++    u32 varTab;     /* variable table start */
++    u32 FDTandFlags;    /* function descriptor table start and flags */
++    volatile u32 descAddrAndStatus;
++    volatile u32 modifiedVarTab;
++    u32 contextSaveSpace;   /* context save space start */
++    u32 literalBases;
++} TaskTableEntry;
++
++
++/* Chained buffer descriptor */
++typedef volatile struct MCD_bufDesc_struct MCD_bufDesc;
++struct MCD_bufDesc_struct {
++   u32 flags;         /* flags describing the DMA */
++   u32 csumResult;    /* checksum from checksumming performed since last checksum reset */
++   s8  *srcAddr;      /* the address to move data from */
++   s8  *destAddr;     /* the address to move data to */
++   s8  *lastDestAddr; /* the last address written to */
++   u32 dmaSize;       /* the number of bytes to transfer independent of the transfer size */
++   MCD_bufDesc *next; /* next buffer descriptor in chain */
++   u32 info;          /* private information about this descriptor;  DMA does not affect it */
++};
++
++/* Progress Query struct */
++typedef volatile struct MCD_XferProg_struct {
++   s8 *lastSrcAddr;         /* the most-recent or last, post-increment source address */
++   s8 *lastDestAddr;        /* the most-recent or last, post-increment destination address */
++   u32  dmaSize;            /* the amount of data transferred for the current buffer */
++   MCD_bufDesc *currBufDesc;/* pointer to the current buffer descriptor being DMAed */
++} MCD_XferProg;
++
++
++/* FEC buffer descriptor */
++typedef volatile struct MCD_bufDescFec_struct {
++    u16 statCtrl;
++    u16 length;
++    u32 dataPointer;
++} MCD_bufDescFec;
++
++
++/*************************************************************************/
++/*
++ * API function Prototypes  - see MCD_dmaApi.c for further notes
++ */
++
++/*
++ * MCD_startDma starts a particular kind of DMA .
++ */
++int MCD_startDma (
++   int channel,   /* the channel on which to run the DMA */
++   s8  *srcAddr,  /* the address to move data from, or buffer-descriptor address */
++   s16 srcIncr,   /* the amount to increment the source address per transfer */
++   s8  *destAddr, /* the address to move data to */
++   s16 destIncr,  /* the amount to increment the destination address per transfer */
++   u32 dmaSize,   /* the number of bytes to transfer independent of the transfer size */
++   u32 xferSize,  /* the number bytes in of each data movement (1, 2, or 4) */
++   u32 initiator, /* what device initiates the DMA */
++   int priority,  /* priority of the DMA */
++   u32 flags,     /* flags describing the DMA */
++   u32 funcDesc   /* a description of byte swapping, bit swapping, and CRC actions */
++);
++
++/* 
++ * MCD_initDma() initializes the DMA API by setting up a pointer to the DMA 
++ * registers, relocating and creating the appropriate task structures, and 
++ * setting up some global settings
++ */
++int MCD_initDma (dmaRegs *sDmaBarAddr, void *taskTableDest, u32 flags);
++
++/* 
++ * MCD_dmaStatus() returns the status of the DMA on the requested channel.
++ */
++int MCD_dmaStatus (int channel);
++
++/* 
++ * MCD_XferProgrQuery() returns progress of DMA on requested channel
++ */
++int MCD_XferProgrQuery (int channel, MCD_XferProg *progRep);
++
++/* 
++ * MCD_killDma() halts the DMA on the requested channel, without any
++ * intention of resuming the DMA.
++ */
++int MCD_killDma (int channel);
++
++/* 
++ * MCD_continDma() continues a DMA which as stopped due to encountering an
++ * unready buffer descriptor.
++ */
++int MCD_continDma (int channel);
++
++/* 
++ * MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is
++ * running on that channel). 
++ */
++int MCD_pauseDma (int channel);
++
++/* 
++ * MCD_resumeDma() resumes the DMA on a given channel (if any DMA is
++ * running on that channel).
++ */
++int MCD_resumeDma (int channel);
++
++/* 
++ * MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA
++ */
++int MCD_csumQuery (int channel, u32 *csum);
++
++/* 
++ * MCD_getCodeSize provides the packed size required by the microcoded task
++ * and structures.
++ */
++int MCD_getCodeSize(void);
++
++/*
++ * MCD_getVersion provides a pointer to a version string and returns a
++ * version number.
++ */
++int MCD_getVersion(char **longVersion);
++
++/* macro for setting a location in the variable table */
++#define MCD_SET_VAR(taskTab,idx,value) ((u32 *)(taskTab)->varTab)[idx] = value
++   /* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function,
++      so I'm avoiding surrounding it with "do {} while(0)" */
++
++#endif  /* DEFINESONLY */
++
++#endif /* _MCD_API_H */
+--- /dev/null
++++ b/drivers/dma/MCD_dmaApi.c
+@@ -0,0 +1,968 @@
++/*********************************************************************
++ *
++ * Copyright (C) 2004  Motorola, Inc.
++ *  MOTOROLA, INC. All Rights Reserved.
++ *  You are hereby granted a copyright license to use
++ *  the SOFTWARE so long as this entire notice is
++ *  retained without alteration in any modified and/or redistributed
++ *  versions, and that such modified versions are clearly identified
++ *  as such. No licenses are granted by implication, estoppel or
++ *  otherwise under any patents or trademarks of Motorola, Inc. This
++ *  software is provided on an "AS IS" basis and without warranty.
++ *
++ *  To the maximum extent permitted by applicable law, MOTOROLA
++ *  DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING
++ *  IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
++ *  PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE
++ *  SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY
++ *  ACCOMPANYING WRITTEN MATERIALS.
++ *
++ *  To the maximum extent permitted by applicable law, IN NO EVENT
++ *  SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING
++ *  WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
++ *  INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY
++ *  LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
++ *
++ *  Motorola assumes no responsibility for the maintenance and support
++ *  of this software
++ ********************************************************************/
++
++/*
++ * File:        MCD_dmaApi.c
++ * Purpose:     Main C file for multi-channel DMA API.
++ *
++ * Notes:
++ *
++ *
++ * Modifications:
++ *
++ *
++ */
++#include <asm/types.h>
++#include <asm/MCD_dma.h>
++#include <asm/virtconvert.h>
++#include "MCD_tasksInit.h"
++#include "MCD_progCheck.h"
++
++/********************************************************************/
++/*
++ * This is an API-internal pointer to the DMA's registers
++ */
++dmaRegs *MCD_dmaBar;
++
++/*
++ * These are the real and model task tables as generated by the
++ * build process
++ */
++extern TaskTableEntry MCD_realTaskTableSrc[NCHANNELS];
++extern TaskTableEntry MCD_modelTaskTableSrc[NUMOFVARIANTS];
++
++/*
++ * However, this (usually) gets relocated to on-chip SRAM, at which
++ * point we access them as these tables
++ */
++volatile TaskTableEntry *MCD_taskTable;
++TaskTableEntry *MCD_modelTaskTable;
++
++
++/*
++ * MCD_chStatus[] is an array of status indicators for remembering
++ * whether a DMA has ever been attempted on each channel, pausing
++ * status, etc.
++ */
++static int MCD_chStatus[NCHANNELS] =
++{
++    MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA,
++    MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA,
++    MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA,
++    MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA
++};
++
++/*
++ * Prototypes for local functions
++ */
++static void MCD_memcpy (int *dest, int *src, u32 size);
++static void MCD_resmActions (int channel);
++
++/*
++ * Buffer descriptors used for storage of progress info for single Dmas
++ * Also used as storage for the DMA for CRCs for single DMAs
++ * Otherwise, the DMA does not parse these buffer descriptors
++ */
++#ifdef MCD_INCLUDE_EU
++extern MCD_bufDesc MCD_singleBufDescs[NCHANNELS];
++#else
++MCD_bufDesc MCD_singleBufDescs[NCHANNELS];
++#endif
++MCD_bufDesc *MCD_relocBuffDesc;
++
++
++/*
++ * Defines for the debug control register's functions
++ */
++#define DBG_CTL_COMP1_TASK  (0x00002000) /* have comparator 1 look for a task # */
++#define DBG_CTL_ENABLE      (DBG_CTL_AUTO_ARM    | \
++                             DBG_CTL_BREAK       | \
++                             DBG_CTL_INT_BREAK   | \
++                             DBG_CTL_COMP1_TASK)
++#define DBG_CTL_DISABLE     (DBG_CTL_AUTO_ARM    | \
++                             DBG_CTL_INT_BREAK   | \
++                             DBG_CTL_COMP1_TASK)
++#define DBG_KILL_ALL_STAT   (0xFFFFFFFF)
++
++/*
++ * Offset to context save area where progress info is stored
++ */
++#define CSAVE_OFFSET        10
++
++/*
++ * Defines for Byte Swapping
++ */
++#define MCD_BYTE_SWAP_KILLER    0xFFF8888F
++#define MCD_NO_BYTE_SWAP_ATALL  0x00040000
++
++/*
++ * Execution Unit Identifiers
++ */
++#define MAC  0  /* legacy - not used */
++#define LUAC 1  /* legacy - not used */
++#define CRC  2  /* legacy - not used */
++#define LURC 3  /* Logic Unit with CRC */
++
++/*
++ * Task Identifiers
++ */
++#define TASK_CHAINNOEU  0
++#define TASK_SINGLENOEU 1
++#ifdef MCD_INCLUDE_EU
++#define TASK_CHAINEU    2
++#define TASK_SINGLEEU   3
++#define TASK_FECRX      4
++#define TASK_FECTX      5
++#else
++#define TASK_CHAINEU    0
++#define TASK_SINGLEEU   1
++#define TASK_FECRX      2
++#define TASK_FECTX      3
++#endif
++
++/*
++ * Structure to remember which variant is on which channel
++ * TBD- need this?
++ */
++typedef struct MCD_remVariants_struct MCD_remVariant;
++struct MCD_remVariants_struct
++{
++   int remDestRsdIncr[NCHANNELS];  /* -1,0,1 */
++   int remSrcRsdIncr[NCHANNELS];   /* -1,0,1 */
++   s16 remDestIncr[NCHANNELS];     /* DestIncr */
++   s16 remSrcIncr[NCHANNELS];      /* srcIncr */
++   u32 remXferSize[NCHANNELS];     /* xferSize */
++};
++
++/*
++ * Structure to remember the startDma parameters for each channel
++ */
++MCD_remVariant MCD_remVariants;
++/********************************************************************/
++/*
++ * Function: MCD_initDma
++ * Purpose:  Initializes the DMA API by setting up a pointer to the DMA
++ *           registers, relocating and creating the appropriate task
++ *           structures, and setting up some global settings
++ * Arguments:
++ *  dmaBarAddr    - pointer to the multichannel DMA registers
++ *  taskTableDest - location to move DMA task code and structs to
++ *  flags         - operational parameters
++ * Return Value:
++ *  MCD_TABLE_UNALIGNED if taskTableDest is not 512-byte aligned
++ *  MCD_OK otherwise
++ */
++extern u32 MCD_funcDescTab0[];
++
++int MCD_initDma (dmaRegs *dmaBarAddr, void *taskTableDest, u32 flags)
++{
++    int i;
++    TaskTableEntry *entryPtr;
++
++    /* setup the local pointer to register set */
++    MCD_dmaBar = dmaBarAddr;
++
++    /* do we need to move/create a task table */
++    if ((flags & MCD_RELOC_TASKS) != 0)
++    {
++        int fixedSize;
++        u32 *fixedPtr;
++        /*int *tablePtr = taskTableDest;TBD*/
++        int varTabsOffset, funcDescTabsOffset, contextSavesOffset;
++        int taskDescTabsOffset;
++        int taskTableSize, varTabsSize, funcDescTabsSize, contextSavesSize;
++        int taskDescTabSize;
++
++        int i;
++
++        /* check if physical address is aligned on 512 byte boundary */
++        if (((u32)taskTableDest & 0x000001ff) != 0)
++            return(MCD_TABLE_UNALIGNED);
++
++        MCD_taskTable = taskTableDest; /* set up local pointer to task Table */
++
++        /*
++         * Create a task table:
++         * - compute aligned base offsets for variable tables and
++         *   function descriptor tables, then
++         * - loop through the task table and setup the pointers
++         * - copy over model task table with the the actual task descriptor
++         *   tables
++         */
++
++        taskTableSize = NCHANNELS * sizeof(TaskTableEntry);
++        /* align variable tables to size */
++        varTabsOffset = taskTableSize + (u32)taskTableDest;
++        if ((varTabsOffset & (VAR_TAB_SIZE - 1)) != 0)
++            varTabsOffset = (varTabsOffset + VAR_TAB_SIZE) & (~VAR_TAB_SIZE);
++        /* align function descriptor tables */
++        varTabsSize = NCHANNELS * VAR_TAB_SIZE;
++        funcDescTabsOffset = varTabsOffset + varTabsSize;
++
++        if ((funcDescTabsOffset & (FUNCDESC_TAB_SIZE - 1)) != 0)
++            funcDescTabsOffset = (funcDescTabsOffset + FUNCDESC_TAB_SIZE) &
++            (~FUNCDESC_TAB_SIZE);
++
++        funcDescTabsSize = FUNCDESC_TAB_NUM * FUNCDESC_TAB_SIZE;
++        contextSavesOffset = funcDescTabsOffset + funcDescTabsSize;
++        contextSavesSize = (NCHANNELS * CONTEXT_SAVE_SIZE);
++        fixedSize = taskTableSize + varTabsSize + funcDescTabsSize +
++                    contextSavesSize;
++
++        /* zero the thing out */
++        fixedPtr = (u32 *)taskTableDest;
++        for (i = 0;i<(fixedSize/4);i++)
++            fixedPtr[i] = 0;
++
++        entryPtr = (TaskTableEntry*)MCD_taskTable;
++        /* set up fixed pointers */
++        for (i = 0; i < NCHANNELS; i++)
++        {
++            entryPtr[i].varTab = (u32)varTabsOffset; /* update ptr to local value */
++            entryPtr[i].FDTandFlags = (u32)funcDescTabsOffset | MCD_TT_FLAGS_DEF;
++            entryPtr[i].contextSaveSpace = (u32)contextSavesOffset;
++            varTabsOffset += VAR_TAB_SIZE;
++#ifdef MCD_INCLUDE_EU /* if not there is only one, just point to the same one */
++            funcDescTabsOffset += FUNCDESC_TAB_SIZE;
++#endif
++            contextSavesOffset += CONTEXT_SAVE_SIZE;
++        }
++        /* copy over the function descriptor table */
++        for ( i = 0; i < FUNCDESC_TAB_NUM; i++)
++        {
++            MCD_memcpy((void*)(entryPtr[i].FDTandFlags & ~MCD_TT_FLAGS_MASK),
++                       (void*)MCD_funcDescTab0, FUNCDESC_TAB_SIZE);
++        }
++
++        /* copy model task table to where the context saves stuff leaves off*/
++        MCD_modelTaskTable = (TaskTableEntry*)contextSavesOffset;
++
++        MCD_memcpy ((void*)MCD_modelTaskTable, (void*)MCD_modelTaskTableSrc,
++                    NUMOFVARIANTS * sizeof(TaskTableEntry));
++
++        entryPtr = MCD_modelTaskTable; /* point to local version of
++                                                            model task table */
++        taskDescTabsOffset = (u32)MCD_modelTaskTable +
++                            (NUMOFVARIANTS * sizeof(TaskTableEntry));
++
++        /* copy actual task code and update TDT ptrs in local model task table */
++        for (i = 0; i < NUMOFVARIANTS; i++)
++        {
++            taskDescTabSize = entryPtr[i].TDTend - entryPtr[i].TDTstart + 4;
++            MCD_memcpy ((void*)taskDescTabsOffset, (void*)entryPtr[i].TDTstart, taskDescTabSize);
++            entryPtr[i].TDTstart = (u32)taskDescTabsOffset;
++            taskDescTabsOffset += taskDescTabSize;
++            entryPtr[i].TDTend = (u32)taskDescTabsOffset - 4;
++        }
++#ifdef MCD_INCLUDE_EU /* Tack single DMA BDs onto end of code so API controls
++                         where they are since DMA might write to them */        
++        MCD_relocBuffDesc = (MCD_bufDesc*)(entryPtr[NUMOFVARIANTS - 1].TDTend + 4);
++#else /* DMA does not touch them so they can be wherever and we don't need to 
++         waste SRAM on them */
++        MCD_relocBuffDesc = MCD_singleBufDescs;
++#endif
++    }
++    else
++    {
++        /* point the would-be relocated task tables and the
++        buffer descriptors to the ones the linker generated */
++
++        if (((u32)MCD_realTaskTableSrc & 0x000001ff) != 0)
++            return(MCD_TABLE_UNALIGNED);
++
++        /* need to add code to make sure that every thing else is aligned properly TBD*/
++        /* this is problematic if we init more than once or after running tasks,
++            need to add variable to see if we have aleady init'd */
++        entryPtr = MCD_realTaskTableSrc;
++        for (i = 0; i < NCHANNELS; i++)
++        {
++            if (((entryPtr[i].varTab & (VAR_TAB_SIZE - 1)) != 0) ||
++                ((entryPtr[i].FDTandFlags & (FUNCDESC_TAB_SIZE - 1)) != 0))
++                return(MCD_TABLE_UNALIGNED);
++        }
++
++        MCD_taskTable = MCD_realTaskTableSrc;
++        MCD_modelTaskTable = MCD_modelTaskTableSrc;
++        MCD_relocBuffDesc = MCD_singleBufDescs;
++    }
++
++
++    /* Make all channels as totally inactive, and remember them as such: */
++
++    MCD_dmaBar->taskbar = (u32) MCD_taskTable;
++    for (i = 0;  i < NCHANNELS;  i++)
++    {
++        MCD_dmaBar->taskControl[i] = 0x0;
++        MCD_chStatus[i] = MCD_NO_DMA;
++    }
++
++   /* Set up pausing mechanism to inactive state: */
++    MCD_dmaBar->debugComp1 = 0;  /* no particular values yet for either comparator registers */
++    MCD_dmaBar->debugComp2 = 0;
++    MCD_dmaBar->debugControl = DBG_CTL_DISABLE;
++    MCD_dmaBar->debugStatus = DBG_KILL_ALL_STAT;
++
++    /* enable or disable commbus prefetch, really need an ifdef or
++       something to keep from trying to set this in the 8220 */
++    if ((flags & MCD_COMM_PREFETCH_EN) != 0)
++        MCD_dmaBar->ptdControl &= ~PTD_CTL_COMM_PREFETCH;
++    else
++        MCD_dmaBar->ptdControl |= PTD_CTL_COMM_PREFETCH;
++
++    return(MCD_OK);
++}
++/*********************** End of MCD_initDma() ***********************/
++
++/********************************************************************/
++/* Function:   MCD_dmaStatus
++ * Purpose:    Returns the status of the DMA on the requested channel
++ * Arguments:  channel - channel number
++ * Returns:    Predefined status indicators
++ */
++int MCD_dmaStatus (int channel)
++{
++    u16 tcrValue;
++
++    if((channel < 0) || (channel >= NCHANNELS))
++        return(MCD_CHANNEL_INVALID);
++
++    tcrValue = MCD_dmaBar->taskControl[channel];
++    if ((tcrValue & TASK_CTL_EN) == 0)
++    {  /* nothing running */
++        /* if last reported with task enabled */
++        if (   MCD_chStatus[channel] == MCD_RUNNING
++            || MCD_chStatus[channel] == MCD_IDLE)
++            MCD_chStatus[channel] = MCD_DONE;
++    }
++    else /* something is running */
++    {
++        /* There are three possibilities: paused, running or idle. */
++        if (   MCD_chStatus[channel] == MCD_RUNNING
++            || MCD_chStatus[channel] == MCD_IDLE)
++        {
++            MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT;
++            /* This register is selected to know which initiator is
++            actually asserted. */
++            if ((MCD_dmaBar->ptdDebug >> channel ) & 0x1 )
++                MCD_chStatus[channel] = MCD_RUNNING;
++            else
++                MCD_chStatus[channel] = MCD_IDLE;
++        /* do not change the status if it is already paused. */
++        }
++    }
++    return MCD_chStatus[channel];
++}
++/******************** End of MCD_dmaStatus() ************************/
++
++/********************************************************************/
++/* Function:    MCD_startDma
++ * Ppurpose:    Starts a particular kind of DMA
++ * Arguments:   see below
++ * Returns:     MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
++ */
++
++int MCD_startDma (
++    int  channel,   /* the channel on which to run the DMA */
++    s8   *srcAddr,  /* the address to move data from, or physical buffer-descriptor address */
++    s16  srcIncr,   /* the amount to increment the source address per transfer */
++    s8   *destAddr, /* the address to move data to */
++    s16  destIncr,  /* the amount to increment the destination address per transfer */
++    u32  dmaSize,   /* the number of bytes to transfer independent of the transfer size */
++    u32  xferSize,  /* the number bytes in of each data movement (1, 2, or 4) */
++    u32  initiator, /* what device initiates the DMA */
++    int  priority,  /* priority of the DMA */
++    u32  flags,     /* flags describing the DMA */
++    u32  funcDesc   /* a description of byte swapping, bit swapping, and CRC actions */
++#ifdef MCD_NEED_ADDR_TRANS
++    s8   *srcAddrVirt /* virtual buffer descriptor address TBD*/
++#endif
++)
++{
++    int srcRsdIncr, destRsdIncr;
++    int *cSave;
++    short xferSizeIncr;
++    int tcrCount = 0;
++#ifdef MCD_INCLUDE_EU
++    u32 *realFuncArray;
++#endif
++
++    if((channel < 0) || (channel >= NCHANNELS))
++        return(MCD_CHANNEL_INVALID);
++        
++    /* tbd - need to determine the proper response to a bad funcDesc when not 
++       including EU functions, for now, assign a benign funcDesc, but maybe
++       should return an error */
++#ifndef MCD_INCLUDE_EU
++    funcDesc = MCD_FUNC_NOEU1;
++#endif
++        
++#ifdef MCD_DEBUG
++printf("startDma:Setting up params\n");
++#endif
++   /* Set us up for task-wise priority.  We don't technically need to do this on every start, but
++      since the register involved is in the same longword as other registers that users are in control
++      of, setting it more than once is probably preferable.  That since the documentation doesn't seem
++      to be completely consistent about the nature of the PTD control register. */
++    MCD_dmaBar->ptdControl |= (u16) 0x8000;
++#if 1 /* Not sure what we need to keep here rtm TBD */
++    /* Calculate additional parameters to the regular DMA calls. */
++    srcRsdIncr = srcIncr < 0 ? -1 : (srcIncr > 0 ? 1 : 0);
++    destRsdIncr = destIncr < 0 ? -1 : (destIncr > 0 ? 1 : 0);
++
++    xferSizeIncr = (xferSize & 0xffff) | 0x20000000;
++
++    /* Remember for each channel which variant is running. */
++    MCD_remVariants.remSrcRsdIncr[channel] = srcRsdIncr;
++    MCD_remVariants.remDestRsdIncr[channel] = destRsdIncr;
++    MCD_remVariants.remDestIncr[channel] = destIncr;
++    MCD_remVariants.remSrcIncr[channel] = srcIncr;
++    MCD_remVariants.remXferSize[channel] = xferSize;
++#endif
++
++    cSave = (int*)(MCD_taskTable[channel].contextSaveSpace) + CSAVE_OFFSET + CURRBD;
++
++#ifdef MCD_INCLUDE_EU /* may move this to EU specific calls */
++    realFuncArray = (u32 *) (MCD_taskTable[channel].FDTandFlags & 0xffffff00);
++    /* Modify the LURC's normal and byte-residue-loop functions according to parameter. */
++    realFuncArray[(LURC*16)] = xferSize == 4 ?
++                                 funcDesc : xferSize == 2 ?
++                                     funcDesc & 0xfffff00f : funcDesc & 0xffff000f;
++    realFuncArray[(LURC*16+1)] = (funcDesc & MCD_BYTE_SWAP_KILLER) | MCD_NO_BYTE_SWAP_ATALL;
++#endif
++   /* Write the initiator field in the TCR, and also set the initiator-hold
++      bit.  Note that,due to a hardware quirk, this could collide with an
++      MDE access to the initiator-register file, so we have to verify that the write
++      reads back correctly. */
++
++    MCD_dmaBar->taskControl[channel] =
++        (initiator << 8) | TASK_CTL_HIPRITSKEN | TASK_CTL_HLDINITNUM;
++
++    while(((MCD_dmaBar->taskControl[channel] & 0x1fff) !=
++          ((initiator << 8) | TASK_CTL_HIPRITSKEN | TASK_CTL_HLDINITNUM)) &&
++            (tcrCount < 1000))
++    {
++        tcrCount++;
++        /*MCD_dmaBar->ptd_tcr[channel] = (initiator << 8) | 0x0020;*/
++        MCD_dmaBar->taskControl[channel] =
++            (initiator << 8) | TASK_CTL_HIPRITSKEN | TASK_CTL_HLDINITNUM;
++    }
++
++    MCD_dmaBar->priority[channel] = (u8)priority & PRIORITY_PRI_MASK;
++    /* should be albe to handle this stuff with only one write to ts reg - tbd */
++    if (channel < 8 && channel >= 0)
++    {
++        MCD_dmaBar->taskSize0 &= ~(0xf << (7-channel)*4);
++        MCD_dmaBar->taskSize0 |= (xferSize & 3) << (((7 - channel)*4) + 2);
++        MCD_dmaBar->taskSize0 |= (xferSize & 3) << ((7 - channel)*4);
++    }
++    else
++    {
++        MCD_dmaBar->taskSize1 &= ~(0xf << (15-channel)*4);
++        MCD_dmaBar->taskSize1 |= (xferSize & 3) << (((15 - channel)*4) + 2);
++        MCD_dmaBar->taskSize1 |= (xferSize & 3) << ((15 - channel)*4);
++    }
++
++    /* setup task table flags/options which mostly control the line buffers */
++    MCD_taskTable[channel].FDTandFlags &= ~MCD_TT_FLAGS_MASK;
++    MCD_taskTable[channel].FDTandFlags |= (MCD_TT_FLAGS_MASK & flags);
++
++    if (flags & MCD_FECTX_DMA)
++    {
++        /* TDTStart and TDTEnd */
++        MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_FECTX].TDTstart;
++        MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_FECTX].TDTend;
++        MCD_startDmaENetXmit(srcAddr, srcAddr, destAddr, MCD_taskTable, channel);
++    }
++    else if (flags & MCD_FECRX_DMA)
++    {
++        /* TDTStart and TDTEnd */
++        MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_FECRX].TDTstart;
++        MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_FECRX].TDTend;
++        MCD_startDmaENetRcv(srcAddr, srcAddr, destAddr, MCD_taskTable, channel);
++    }
++    else if(flags & MCD_SINGLE_DMA)
++    {
++        /* this buffer descriptor is used for storing off initial parameters for later
++           progress query calculation and for the DMA to write the resulting checksum
++           The DMA does not use this to determine how to operate, that info is passed
++           with the init routine*/
++        MCD_relocBuffDesc[channel].srcAddr = srcAddr;
++        MCD_relocBuffDesc[channel].destAddr = destAddr;
++        MCD_relocBuffDesc[channel].lastDestAddr = destAddr;  /* definitely not its final value */
++        MCD_relocBuffDesc[channel].dmaSize = dmaSize;
++        MCD_relocBuffDesc[channel].flags = 0;       /* not used */
++        MCD_relocBuffDesc[channel].csumResult = 0;  /* not used */
++        MCD_relocBuffDesc[channel].next = 0;        /* not used */
++
++        /* Initialize the progress-querying stuff to show no progress:*/
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET] = (int)srcAddr;
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET] = (int)destAddr;
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET] = 0;
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET] =
++                                             (u32) &(MCD_relocBuffDesc[channel]);
++        /* tbd - need to keep the user from trying to call the EU routine
++           when MCD_INCLUDE_EU is not defined */
++        if( funcDesc == MCD_FUNC_NOEU1 || funcDesc == MCD_FUNC_NOEU2)
++        {
++           /* TDTStart and TDTEnd */
++           MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_SINGLENOEU].TDTstart;
++           MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_SINGLENOEU].TDTend;
++           MCD_startDmaSingleNoEu(srcAddr, srcIncr, destAddr, destIncr, dmaSize, dmaSize,
++                                xferSizeIncr, flags, (int *)&(MCD_relocBuffDesc[channel]), cSave,
++                                MCD_taskTable, channel);
++        }
++        else
++        {
++           /* TDTStart and TDTEnd */
++           MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_SINGLEEU].TDTstart;
++           MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_SINGLEEU].TDTend;
++           MCD_startDmaSingleEu(srcAddr, srcIncr, destAddr, destIncr, dmaSize, dmaSize,
++                              xferSizeIncr, flags, (int *)&(MCD_relocBuffDesc[channel]), cSave,
++                              MCD_taskTable, channel);
++        }
++    }
++    else
++    { /* chained DMAS */
++        /* Initialize the progress-querying stuff to show no progress:*/
++#if 1 /* (!defined(MCD_NEED_ADDR_TRANS)) */
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET]
++          = (int)((MCD_bufDesc*) phys_to_virt(srcAddr))->srcAddr;
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET]
++          = (int)((MCD_bufDesc*) phys_to_virt(srcAddr))->destAddr;
++#else /* if using address translation, need the virtual addr of the first buffdesc */
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET]
++          = (int)((MCD_bufDesc*) srcAddrVirt)->srcAddr;
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET]
++          = (int)((MCD_bufDesc*) srcAddrVirt)->destAddr;
++#endif
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET] = 0;
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET] = (u32) srcAddr;
++
++        if( funcDesc == MCD_FUNC_NOEU1 || funcDesc == MCD_FUNC_NOEU2)
++        {
++          /*TDTStart and TDTEnd*/
++          MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_CHAINNOEU].TDTstart;
++          MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_CHAINNOEU].TDTend;
++          MCD_startDmaChainNoEu((int *)srcAddr, srcIncr, destIncr, xferSize,
++                                    xferSizeIncr, cSave, MCD_taskTable, channel);
++        }
++        else
++        {
++          /*TDTStart and TDTEnd*/
++          MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_CHAINEU].TDTstart;
++          MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_CHAINEU].TDTend;
++          MCD_startDmaChainEu((int *)srcAddr, srcIncr, destIncr, xferSize,
++                                 xferSizeIncr, cSave, MCD_taskTable, channel);
++        }
++    }
++    MCD_chStatus[channel] = MCD_IDLE;
++    return(MCD_OK);
++}
++
++/************************ End of MCD_startDma() *********************/
++
++/********************************************************************/
++/* Function:    MCD_XferProgrQuery
++ * Purpose:     Returns progress of DMA on requested channel
++ * Arguments:   channel - channel to retrieve progress for
++ *              progRep - pointer to user supplied MCD_XferProg struct
++ * Returns:     MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
++ *
++ * Notes:
++ *  MCD_XferProgrQuery() upon completing or after aborting a DMA, or
++ *  while the DMA is in progress, this function returns the first
++ *  DMA-destination address not (or not yet) used in the DMA. When 
++ *  encountering a non-ready buffer descriptor, the information for
++ *  the last completed descriptor is returned.
++ *
++ *  MCD_XferProgQuery() has to avoid the possibility of getting
++ *  partially-updated information in the event that we should happen
++ *  to query DMA progress just as the DMA is updating it. It does that
++ *  by taking advantage of the fact context is not saved frequently for
++ *  the most part. We therefore read it at least twice until we get the
++ *  same information twice in a row.
++ *
++ *  Because a small, but not insignificant, amount of time is required
++ *  to write out the progress-query information, especially upon
++ *  completion of the DMA, it would be wise to guarantee some time lag
++ *  between successive readings of the progress-query information.
++ */
++
++/*
++ * How many iterations of the loop below to execute to stabilize values
++ */
++#define STABTIME 0
++
++int MCD_XferProgrQuery (int channel, MCD_XferProg *progRep)
++{
++    MCD_XferProg prevRep;
++    int again;  /* true if we are to try again to get consistent results */
++    int i;  /* used as a time-waste counter */
++    int destDiffBytes; /* Total number of bytes that we think actually got xfered. */
++    int numIterations; /* number of iterations */
++    int bytesNotXfered; /* bytes that did not get xfered. */
++    s8 *LWAlignedInitDestAddr, *LWAlignedCurrDestAddr;
++    int subModVal, addModVal; /* Mode values to added and subtracted from the
++                                final destAddr */
++
++    if((channel < 0) || (channel >= NCHANNELS))
++        return(MCD_CHANNEL_INVALID);
++
++    /* Read a trial value for the progress-reporting values*/
++    prevRep.lastSrcAddr =
++          (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET];
++    prevRep.lastDestAddr =
++          (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET];
++    prevRep.dmaSize = ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET];
++    prevRep.currBufDesc =
++          (MCD_bufDesc*) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET];
++    /* Repeatedly reread those values until they match previous values: */
++    do {
++        /* Waste a little bit of time to ensure stability: */
++        for (i = 0;  i < STABTIME;  i++)
++            i += i >> 2;  /* make sure this loop does something so that it doesn't get optimized out */
++        /* Check them again: */
++        progRep->lastSrcAddr =
++            (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET];
++        progRep->lastDestAddr =
++            (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET];
++        progRep->dmaSize = ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET];
++        progRep->currBufDesc =
++            (MCD_bufDesc*) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET];
++       /* See if they match: */
++       if (   prevRep.lastSrcAddr != progRep->lastSrcAddr
++           || prevRep.lastDestAddr != progRep->lastDestAddr
++           || prevRep.dmaSize != progRep->dmaSize
++           || prevRep.currBufDesc != progRep->currBufDesc)
++       {
++          /* If they don't match, remember previous values and try again:*/
++          prevRep.lastSrcAddr = progRep->lastSrcAddr;
++          prevRep.lastDestAddr = progRep->lastDestAddr;
++          prevRep.dmaSize = progRep->dmaSize;
++          prevRep.currBufDesc = progRep->currBufDesc;
++          again = MCD_TRUE;
++       }
++       else
++          again = MCD_FALSE;
++    } while (again == MCD_TRUE);
++
++
++    /* Update the dCount, srcAddr and destAddr */
++    /* To calculate dmaCount, we consider destination address. C
++       overs M1,P1,Z for destination */
++    switch(MCD_remVariants.remDestRsdIncr[channel]) {
++        case MINUS1:
++           subModVal = ((int)progRep->lastDestAddr) & ((MCD_remVariants.remXferSize[channel]) - 1);
++           addModVal = ((int)progRep->currBufDesc->destAddr) & ((MCD_remVariants.remXferSize[channel]) - 1);
++           LWAlignedInitDestAddr = (progRep->currBufDesc->destAddr) - addModVal;
++           LWAlignedCurrDestAddr = (progRep->lastDestAddr) - subModVal;
++           destDiffBytes = LWAlignedInitDestAddr - LWAlignedCurrDestAddr;
++           bytesNotXfered = (destDiffBytes/MCD_remVariants.remDestIncr[channel]) *
++                            ( MCD_remVariants.remDestIncr[channel]
++                            + MCD_remVariants.remXferSize[channel]);
++           progRep->dmaSize = destDiffBytes - bytesNotXfered + addModVal - subModVal;
++           break;
++        case ZERO:
++           progRep->lastDestAddr = progRep->currBufDesc->destAddr;
++           break;
++        case PLUS1:
++           /* This value has to be subtracted from the final calculated dCount. */
++           subModVal = ((int)progRep->currBufDesc->destAddr) & ((MCD_remVariants.remXferSize[channel]) - 1);
++           /* These bytes are already in lastDestAddr. */
++            addModVal = ((int)progRep->lastDestAddr) & ((MCD_remVariants.remXferSize[channel]) - 1);
++            LWAlignedInitDestAddr = (progRep->currBufDesc->destAddr) - subModVal;
++            LWAlignedCurrDestAddr = (progRep->lastDestAddr) - addModVal;
++            destDiffBytes = (progRep->lastDestAddr - LWAlignedInitDestAddr);
++            numIterations = ( LWAlignedCurrDestAddr - LWAlignedInitDestAddr)/MCD_remVariants.remDestIncr[channel];
++            bytesNotXfered =  numIterations *
++                ( MCD_remVariants.remDestIncr[channel]
++                  - MCD_remVariants.remXferSize[channel]);
++           progRep->dmaSize = destDiffBytes - bytesNotXfered - subModVal;
++           break;
++        default:
++           break;
++    }
++
++    /* This covers M1,P1,Z for source */
++    switch(MCD_remVariants.remSrcRsdIncr[channel]) {
++        case MINUS1:
++            progRep->lastSrcAddr =
++                progRep->currBufDesc->srcAddr +
++                 ( MCD_remVariants.remSrcIncr[channel] *
++                   (progRep->dmaSize/MCD_remVariants.remXferSize[channel]));
++            break;
++        case ZERO:
++            progRep->lastSrcAddr = progRep->currBufDesc->srcAddr;
++            break;
++       case PLUS1:
++            progRep->lastSrcAddr =
++                progRep->currBufDesc->srcAddr +
++                 ( MCD_remVariants.remSrcIncr[channel] *
++                   (progRep->dmaSize/MCD_remVariants.remXferSize[channel]));
++          break;
++       default: break;
++    }
++
++    return(MCD_OK);
++}
++/******************* End of MCD_XferProgrQuery() ********************/
++
++/********************************************************************/
++/* MCD_resmActions() does the majority of the actions of a DMA resume.
++ * It is called from MCD_killDma() and MCD_resumeDma().  It has to be
++ * a separate function because the kill function has to negate the task
++ * enable before resuming it, but the resume function has to do nothing
++ * if there is no DMA on that channel (i.e., if the enable bit is 0).
++ */
++static void MCD_resmActions (int channel)
++{
++   MCD_dmaBar->debugControl = DBG_CTL_DISABLE;
++   MCD_dmaBar->debugStatus = MCD_dmaBar->debugStatus;
++   MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT; /* This register is selected to know
++                                        which initiator is actually asserted. */
++   if((MCD_dmaBar->ptdDebug >> channel ) & 0x1)
++       MCD_chStatus[channel] = MCD_RUNNING;
++   else
++       MCD_chStatus[channel] = MCD_IDLE;
++}
++/********************* End of MCD_resmActions() *********************/
++
++/********************************************************************/
++/* Function:    MCD_killDma
++ * Purpose:     Halt the DMA on the requested channel, without any
++ *              intention of resuming the DMA.
++ * Arguments:   channel - requested channel
++ * Returns:     MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
++ *
++ * Notes:
++ *  A DMA may be killed from any state, including paused state, and it
++ *  always goes to the MCD_HALTED state even if it is killed while in
++ *  the MCD_NO_DMA or MCD_IDLE states.
++ */
++int MCD_killDma (int channel)
++{
++   /* MCD_XferProg progRep; */
++
++    if((channel < 0) || (channel >= NCHANNELS))
++        return(MCD_CHANNEL_INVALID);
++
++    MCD_dmaBar->taskControl[channel] = 0x0;
++    MCD_resumeDma (channel);
++    /*
++     * This must be after the write to the TCR so that the task doesn't
++     * start up again momentarily, and before the status assignment so
++     * as to override whatever MCD_resumeDma() may do to the channel
++     * status.
++     */
++    MCD_chStatus[channel] = MCD_HALTED;
++
++    /*
++     * Update the current buffer descriptor's lastDestAddr field
++     *
++     * MCD_XferProgrQuery (channel, &progRep);
++     * progRep.currBufDesc->lastDestAddr = progRep.lastDestAddr;
++     */
++    return(MCD_OK);
++}
++/************************ End of MCD_killDma() **********************/
++
++/********************************************************************/
++/* Function:    MCD_continDma
++ * Purpose:     Continue a DMA which as stopped due to encountering an
++ *              unready buffer descriptor.
++ * Arguments:   channel - channel to continue the DMA on
++ * Returns:     MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
++ *
++ * Notes:
++ *  This routine does not check to see if there is a task which can
++ *  be continued. Also this routine should not be used with single DMAs.
++ */
++int MCD_continDma (int channel)
++{
++    if((channel < 0) || (channel >= NCHANNELS))
++        return(MCD_CHANNEL_INVALID);
++
++    MCD_dmaBar->taskControl[channel] |= TASK_CTL_EN;
++    MCD_chStatus[channel] = MCD_RUNNING;
++
++    return(MCD_OK);
++}
++/********************** End of MCD_continDma() **********************/
++
++/*********************************************************************
++ * MCD_pauseDma() and MCD_resumeDma() below use the DMA's debug unit
++ * to freeze a task and resume it.  We freeze a task by breakpointing
++ * on the stated task.  That is, not any specific place in the task,
++ * but any time that task executes.  In particular, when that task
++ * executes, we want to freeze that task and only that task.
++ *
++ * The bits of the debug control register influence interrupts vs.
++ * breakpoints as follows:
++ * - Bits 14 and 0 enable or disable debug functions.  If enabled, you
++ *   will get the interrupt but you may or may not get a breakpoint.
++ * - Bits 2 and 1 decide whether you also get a breakpoint in addition
++ *   to an interrupt.
++ *
++ * The debug unit can do these actions in response to either internally
++ * detected breakpoint conditions from the comparators, or in response
++ * to the external breakpoint pin, or both.
++ * - Bits 14 and 1 perform the above-described functions for
++ *   internally-generated conditions, i.e., the debug comparators.
++ * - Bits 0 and 2 perform the above-described functions for external
++ *   conditions, i.e., the breakpoint external pin.
++ *
++ * Note that, although you "always" get the interrupt when you turn
++ * the debug functions, the interrupt can nevertheless, if desired, be
++ * masked by the corresponding bit in the PTD's IMR. Note also that
++ * this means that bits 14 and 0 must enable debug functions before
++ * bits 1 and 2, respectively, have any effect.
++ *
++ * NOTE: It's extremely important to not pause more than one DMA channel 
++ *  at a time.
++ ********************************************************************/
++
++/********************************************************************/
++/* Function:    MCD_pauseDma
++ * Purpose:     Pauses the DMA on a given channel (if any DMA is running
++ *              on that channel).
++ * Arguments:   channel
++ * Returns:     MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
++ */
++int MCD_pauseDma (int channel)
++{
++    /* MCD_XferProg progRep; */
++
++    if((channel < 0) || (channel >= NCHANNELS))
++        return(MCD_CHANNEL_INVALID);
++
++    if (MCD_dmaBar->taskControl[channel] & TASK_CTL_EN)
++    {
++        MCD_dmaBar->debugComp1 = channel;
++        MCD_dmaBar->debugControl = DBG_CTL_ENABLE | (1 << (channel + 16));
++        MCD_chStatus[channel] = MCD_PAUSED;
++
++        /*
++         * Update the current buffer descriptor's lastDestAddr field
++         *
++         * MCD_XferProgrQuery (channel, &progRep);
++         * progRep.currBufDesc->lastDestAddr = progRep.lastDestAddr;
++         */
++    }
++    return(MCD_OK);
++}
++/************************* End of MCD_pauseDma() ********************/
++
++/********************************************************************/
++/* Function:    MCD_resumeDma
++ * Purpose:     Resumes the DMA on a given channel (if any DMA is
++ *              running on that channel).
++ * Arguments:   channel - channel on which to resume DMA
++ * Returns:     MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
++ */
++int MCD_resumeDma (int channel)
++{
++    if((channel < 0) || (channel >= NCHANNELS))
++        return(MCD_CHANNEL_INVALID);
++
++    if (MCD_dmaBar->taskControl[channel] & TASK_CTL_EN)
++        MCD_resmActions (channel);
++
++    return(MCD_OK);
++}
++/************************ End of MCD_resumeDma() ********************/
++
++/********************************************************************/
++/* Function:    MCD_csumQuery
++ * Purpose:     Provide the checksum after performing a non-chained DMA
++ * Arguments:   channel - channel to report on
++ *              csum - pointer to where to write the checksum/CRC
++ * Returns:     MCD_ERROR if the channel is invalid, else MCD_OK
++ *
++ * Notes:
++ *
++ */
++int MCD_csumQuery (int channel, u32 *csum)
++{
++#ifdef MCD_INCLUDE_EU
++    if((channel < 0) || (channel >= NCHANNELS))
++        return(MCD_CHANNEL_INVALID);
++
++    *csum = MCD_relocBuffDesc[channel].csumResult;
++    return(MCD_OK);
++#else
++    return(MCD_ERROR);
++#endif
++}
++/*********************** End of MCD_resumeDma() *********************/
++
++/********************************************************************/
++/* Function:    MCD_getCodeSize
++ * Purpose:     Provide the size requirements of the microcoded tasks
++ * Returns:     Size in bytes
++ */
++int MCD_getCodeSize(void)
++{
++#ifdef MCD_INCLUDE_EU
++    return(0x2b5c);
++#else
++    return(0x173c);
++#endif
++}
++/********************** End of MCD_getCodeSize() ********************/
++
++/********************************************************************/
++/* Function:    MCD_getVersion
++ * Purpose:     Provide the version string and number
++ * Arguments:   longVersion - user supplied pointer to a pointer to a char
++ *                    which points to the version string
++ * Returns:     Version number and version string (by reference)
++ */
++char MCD_versionString[] = "Multi-channel DMA API Alpha v0.3 (2004-04-26)";
++#define MCD_REV_MAJOR   0x00
++#define MCD_REV_MINOR   0x03
++
++int MCD_getVersion(char **longVersion)
++{
++    *longVersion = MCD_versionString;
++    return((MCD_REV_MAJOR << 8) | MCD_REV_MINOR);
++}
++/********************** End of MCD_getVersion() *********************/
++
++/********************************************************************/
++/* Private version of memcpy()
++ * Note that everything this is used for is longword-aligned.
++ */
++static void MCD_memcpy (int *dest, int *src, u32 size)
++{
++    u32 i;
++
++    for (i = 0;  i < size;  i += sizeof(int), dest++, src++)
++        *dest = *src;
++}
++/********************************************************************/
+--- /dev/null
++++ b/drivers/dma/MCD_progCheck.h
+@@ -0,0 +1,33 @@
++/*********************************************************************
++ *
++ * Copyright (C) 2004  Motorola, Inc.
++ *  MOTOROLA, INC. All Rights Reserved.
++ *  You are hereby granted a copyright license to use
++ *  the SOFTWARE so long as this entire notice is
++ *  retained without alteration in any modified and/or redistributed
++ *  versions, and that such modified versions are clearly identified
++ *  as such. No licenses are granted by implication, estoppel or
++ *  otherwise under any patents or trademarks of Motorola, Inc. This
++ *  software is provided on an "AS IS" basis and without warranty.
++ *
++ *  To the maximum extent permitted by applicable law, MOTOROLA
++ *  DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING
++ *  IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
++ *  PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE
++ *  SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY
++ *  ACCOMPANYING WRITTEN MATERIALS.
++ *
++ *  To the maximum extent permitted by applicable law, IN NO EVENT
++ *  SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING
++ *  WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
++ *  INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY
++ *  LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
++ *
++ *  Motorola assumes no responsibility for the maintenance and support
++ *  of this software
++ ********************************************************************/
++ /* This file is autogenerated. Do not change */
++#define CURRBD 4
++#define DCOUNT 6
++#define DESTPTR 5
++#define SRCPTR 7
+--- /dev/null
++++ b/drivers/dma/MCD_tasks.c
+@@ -0,0 +1,2452 @@
++/*********************************************************************
++ *
++ * Copyright (C) 2004  Motorola, Inc.
++ *  MOTOROLA, INC. All Rights Reserved.
++ *  You are hereby granted a copyright license to use
++ *  the SOFTWARE so long as this entire notice is
++ *  retained without alteration in any modified and/or redistributed
++ *  versions, and that such modified versions are clearly identified
++ *  as such. No licenses are granted by implication, estoppel or
++ *  otherwise under any patents or trademarks of Motorola, Inc. This
++ *  software is provided on an "AS IS" basis and without warranty.
++ *
++ *  To the maximum extent permitted by applicable law, MOTOROLA
++ *  DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING
++ *  IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
++ *  PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE
++ *  SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY
++ *  ACCOMPANYING WRITTEN MATERIALS.
++ *
++ *  To the maximum extent permitted by applicable law, IN NO EVENT
++ *  SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING
++ *  WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
++ *  INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY
++ *  LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
++ *
++ *  Motorola assumes no responsibility for the maintenance and support
++ *  of this software
++ ********************************************************************/
++/*
++ * File:        MCD_tasks.c
++ * Purpose:     Contains task code and structures for Multi-channel DMA
++ *
++ * Notes:
++ *
++ *
++ * Modifications:
++ *
++ *
++ */
++
++#include <asm/MCD_dma.h>
++
++u32 MCD_varTab0[];
++u32 MCD_varTab1[];
++u32 MCD_varTab2[];
++u32 MCD_varTab3[];
++u32 MCD_varTab4[];
++u32 MCD_varTab5[];
++u32 MCD_varTab6[];
++u32 MCD_varTab7[];
++u32 MCD_varTab8[];
++u32 MCD_varTab9[];
++u32 MCD_varTab10[];
++u32 MCD_varTab11[];
++u32 MCD_varTab12[];
++u32 MCD_varTab13[];
++u32 MCD_varTab14[];
++u32 MCD_varTab15[];
++
++u32 MCD_funcDescTab0[];
++#ifdef MCD_INCLUDE_EU
++u32 MCD_funcDescTab1[];
++u32 MCD_funcDescTab2[];
++u32 MCD_funcDescTab3[];
++u32 MCD_funcDescTab4[];
++u32 MCD_funcDescTab5[];
++u32 MCD_funcDescTab6[];
++u32 MCD_funcDescTab7[];
++u32 MCD_funcDescTab8[];
++u32 MCD_funcDescTab9[];
++u32 MCD_funcDescTab10[];
++u32 MCD_funcDescTab11[];
++u32 MCD_funcDescTab12[];
++u32 MCD_funcDescTab13[];
++u32 MCD_funcDescTab14[];
++u32 MCD_funcDescTab15[];
++#endif
++
++u32 MCD_contextSave0[];
++u32 MCD_contextSave1[];
++u32 MCD_contextSave2[];
++u32 MCD_contextSave3[];
++u32 MCD_contextSave4[];
++u32 MCD_contextSave5[];
++u32 MCD_contextSave6[];
++u32 MCD_contextSave7[];
++u32 MCD_contextSave8[];
++u32 MCD_contextSave9[];
++u32 MCD_contextSave10[];
++u32 MCD_contextSave11[];
++u32 MCD_contextSave12[];
++u32 MCD_contextSave13[];
++u32 MCD_contextSave14[];
++u32 MCD_contextSave15[];
++
++u32 MCD_realTaskTableSrc[] =
++{
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab0,   /* Task 0 Variable Table */
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave0,  /* Task 0 context save space */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab1,   /* Task 1 Variable Table */
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_funcDescTab1,  /* Task 1 Function Descriptor Table & Flags */
++#else
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++#endif
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave1,  /* Task 1 context save space */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab2,   /* Task 2 Variable Table */
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_funcDescTab2,  /* Task 2 Function Descriptor Table & Flags */
++#else
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++#endif
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave2,  /* Task 2 context save space */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab3,   /* Task 3 Variable Table */
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_funcDescTab3,  /* Task 3 Function Descriptor Table & Flags */
++#else
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++#endif
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave3,  /* Task 3 context save space */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab4,   /* Task 4 Variable Table */
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_funcDescTab4,  /* Task 4 Function Descriptor Table & Flags */
++#else
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++#endif
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave4,  /* Task 4 context save space */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab5,   /* Task 5 Variable Table */
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_funcDescTab5,  /* Task 5 Function Descriptor Table & Flags */
++#else
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++#endif
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave5,  /* Task 5 context save space */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab6,   /* Task 6 Variable Table */
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_funcDescTab6,  /* Task 6 Function Descriptor Table & Flags */
++#else
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++#endif
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave6,  /* Task 6 context save space */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab7,   /* Task 7 Variable Table */
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_funcDescTab7,  /* Task 7 Function Descriptor Table & Flags */
++#else
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++#endif
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave7,  /* Task 7 context save space */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab8,   /* Task 8 Variable Table */
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_funcDescTab8,  /* Task 8 Function Descriptor Table & Flags */
++#else
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++#endif
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave8,  /* Task 8 context save space */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab9,   /* Task 9 Variable Table */
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_funcDescTab9,  /* Task 9 Function Descriptor Table & Flags */
++#else
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++#endif
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave9,  /* Task 9 context save space */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab10,  /* Task 10 Variable Table */
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_funcDescTab10, /* Task 10 Function Descriptor Table & Flags */
++#else
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++#endif
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave10, /* Task 10 context save space */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab11,  /* Task 11 Variable Table */
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_funcDescTab11, /* Task 11 Function Descriptor Table & Flags */
++#else
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++#endif
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave11, /* Task 11 context save space */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab12,  /* Task 12 Variable Table */
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_funcDescTab12, /* Task 12 Function Descriptor Table & Flags */
++#else
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++#endif
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave12, /* Task 12 context save space */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab13,  /* Task 13 Variable Table */
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_funcDescTab13, /* Task 13 Function Descriptor Table & Flags */
++#else
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++#endif
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave13, /* Task 13 context save space */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab14,  /* Task 14 Variable Table */
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_funcDescTab14, /* Task 14 Function Descriptor Table & Flags */
++#else
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++#endif
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave14, /* Task 14 context save space */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_varTab15,  /* Task 15 Variable Table */
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_funcDescTab15, /* Task 15 Function Descriptor Table & Flags */
++#else
++    (u32)MCD_funcDescTab0,  /* Task 0 Function Descriptor Table & Flags */
++#endif
++    0x00000000,
++    0x00000000,
++    (u32)MCD_contextSave15, /* Task 15 context save space */
++    0x00000000,
++};
++
++
++u32 MCD_varTab0[] =
++{   /* Task 0 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++
++u32 MCD_varTab1[] =
++{   /* Task 1 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++u32 MCD_varTab2[]=
++{   /* Task 2 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++u32 MCD_varTab3[]=
++{   /* Task 3 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++u32 MCD_varTab4[]=
++{   /* Task 4 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++u32 MCD_varTab5[]=
++{   /* Task 5 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++u32 MCD_varTab6[]=
++{   /* Task 6 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++u32 MCD_varTab7[]=
++{   /* Task 7 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++u32 MCD_varTab8[]=
++{   /* Task 8 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++u32 MCD_varTab9[]=
++{   /* Task 9 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++u32 MCD_varTab10[]=
++{   /* Task 10 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++u32 MCD_varTab11[]=
++{   /* Task 11 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++u32 MCD_varTab12[]=
++{   /* Task 12 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++u32 MCD_varTab13[]=
++{   /* Task 13 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++u32 MCD_varTab14[]=
++{   /* Task 14 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++u32 MCD_varTab15[]=
++{   /* Task 15 Variable Table */
++    0x00000000, /* var[0] */
++    0x00000000, /* var[1] */
++    0x00000000, /* var[2] */
++    0x00000000, /* var[3] */
++    0x00000000, /* var[4] */
++    0x00000000, /* var[5] */
++    0x00000000, /* var[6] */
++    0x00000000, /* var[7] */
++    0x00000000, /* var[8] */
++    0x00000000, /* var[9] */
++    0x00000000, /* var[10] */
++    0x00000000, /* var[11] */
++    0x00000000, /* var[12] */
++    0x00000000, /* var[13] */
++    0x00000000, /* var[14] */
++    0x00000000, /* var[15] */
++    0x00000000, /* var[16] */
++    0x00000000, /* var[17] */
++    0x00000000, /* var[18] */
++    0x00000000, /* var[19] */
++    0x00000000, /* var[20] */
++    0x00000000, /* var[21] */
++    0x00000000, /* var[22] */
++    0x00000000, /* var[23] */
++    0xe0000000, /* inc[0] */
++    0x20000000, /* inc[1] */
++    0x2000ffff, /* inc[2] */
++    0x00000000, /* inc[3] */
++    0x00000000, /* inc[4] */
++    0x00000000, /* inc[5] */
++    0x00000000, /* inc[6] */
++    0x00000000, /* inc[7] */
++};
++
++u32 MCD_funcDescTab0[]=
++{   /* Task 0 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++
++#ifdef MCD_INCLUDE_EU
++u32 MCD_funcDescTab1[]=
++{   /* Task 1 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++
++u32 MCD_funcDescTab2[]=
++{   /* Task 2 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++
++u32 MCD_funcDescTab3[]=
++{   /* Task 3 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++
++u32 MCD_funcDescTab4[]=
++{   /* Task 4 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++
++u32 MCD_funcDescTab5[]=
++{   /* Task 5 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++
++u32 MCD_funcDescTab6[]=
++{   /* Task 6 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++
++u32 MCD_funcDescTab7[]=
++{   /* Task 7 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++
++u32 MCD_funcDescTab8[]=
++{   /* Task 8 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++
++u32 MCD_funcDescTab9[]=
++{   /* Task 9 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++
++u32 MCD_funcDescTab10[]=
++{   /* Task 10 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++
++u32 MCD_funcDescTab11[]=
++{   /* Task 11 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++
++u32 MCD_funcDescTab12[]=
++{   /* Task 12 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++
++u32 MCD_funcDescTab13[]=
++{   /* Task 13 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++
++u32 MCD_funcDescTab14[]=
++{   /* Task 14 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++
++u32 MCD_funcDescTab15[]=
++{   /* Task 15 Function Descriptor Table */
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0xa0045670, /* mainFunc(), EU# 3 */
++    0xa0000000, /* rsduFunc(), EU# 3 */
++    0xa0000000, /* crcAccumVal(), EU# 3 */
++    0x20000000, /* setCrcAccum(), EU# 3 */
++    0x21800000, /* and(), EU# 3 */
++    0x21e00000, /* or(), EU# 3 */
++    0x20400000, /* add(), EU# 3 */
++    0x20500000, /* sub(), EU# 3 */
++    0x205a0000, /* andNot(), EU# 3 */
++    0x202fa000, /* andReadyBit(), EU# 3 */
++    0x202f9000, /* andNotReadyBit(), EU# 3 */
++    0x202ea000, /* andWrapBit(), EU# 3 */
++    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202e2000, /* andInterruptBit(), EU# 3 */
++    0x202f2000, /* andLoopBit(), EU# 3 */
++    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++};
++#endif /*MCD_INCLUDE_EU*/
++
++u32 MCD_contextSave0[128];  /* Task 0 context save space */
++u32 MCD_contextSave1[128];  /* Task 1 context save space */
++u32 MCD_contextSave2[128];  /* Task 2 context save space */
++u32 MCD_contextSave3[128];  /* Task 3 context save space */
++u32 MCD_contextSave4[128];  /* Task 4 context save space */
++u32 MCD_contextSave5[128];  /* Task 5 context save space */
++u32 MCD_contextSave6[128];  /* Task 6 context save space */
++u32 MCD_contextSave7[128];  /* Task 7 context save space */
++u32 MCD_contextSave8[128];  /* Task 8 context save space */
++u32 MCD_contextSave9[128];  /* Task 9 context save space */
++u32 MCD_contextSave10[128]; /* Task 10 context save space */
++u32 MCD_contextSave11[128]; /* Task 11 context save space */
++u32 MCD_contextSave12[128]; /* Task 12 context save space */
++u32 MCD_contextSave13[128]; /* Task 13 context save space */
++u32 MCD_contextSave14[128]; /* Task 14 context save space */
++u32 MCD_contextSave15[128]; /* Task 15 context save space */
++
++/* Task Descriptor Tables - the guts */
++u32 MCD_ChainNoEu_TDT[];
++u32 MCD_SingleNoEu_TDT[];
++#ifdef MCD_INCLUDE_EU
++u32 MCD_ChainEu_TDT[];
++u32 MCD_SingleEu_TDT[];
++#endif
++u32 MCD_ENetRcv_TDT[];
++u32 MCD_ENetXmit_TDT[];
++
++u32 MCD_modelTaskTableSrc[]=
++{
++    (u32)MCD_ChainNoEu_TDT,
++    (u32)&((u8*)MCD_ChainNoEu_TDT)[0x00000178],
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_SingleNoEu_TDT,
++    (u32)&((u8*)MCD_SingleNoEu_TDT)[0x000000d4],
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++#ifdef MCD_INCLUDE_EU
++    (u32)MCD_ChainEu_TDT,
++    (u32)&((u8*)MCD_ChainEu_TDT)[0x00000180],
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_SingleEu_TDT,
++    (u32)&((u8*)MCD_SingleEu_TDT)[0x000000dc],
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++#endif
++    (u32)MCD_ENetRcv_TDT,
++    (u32)&((u8*)MCD_ENetRcv_TDT)[0x0000009C],
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    (u32)MCD_ENetXmit_TDT,
++    (u32)&((u8*)MCD_ENetXmit_TDT)[0x000000d0],
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++    0x00000000,
++};
++
++u32 MCD_ChainNoEu_TDT[]=
++{
++    0x80004000, /* 0000(:370):  LCDEXT: idx0 = 0x00000000; ; */
++    0x8118801b, /* 0004(:370):  LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */
++    0xb8ca0018, /* 0008(:371):    LCD: idx2 = *(idx1 + var20); idx2 once var0; idx2 += inc3 */
++    0x10004b10, /* 000C(:372):      DRD1A: var18 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x7000000c, /* 0010(:373):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
++    0x024cf89f, /* 0014(:373):      DRD2B1: var9 = EU3(); EU3(idx2)  */
++    0x60000009, /* 0018(:374):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT init=0 WS=0 RS=0 */
++    0x080cf89f, /* 001C(:374):      DRD2B1: idx0 = EU3(); EU3(idx2)  */
++    0x000001f8, /* 0020(:0):    NOP */
++    0x98180524, /* 0024(:378):  LCD: idx0 = idx0; idx0 != var20; idx0 += inc4 */
++    0x8118801b, /* 0028(:380):    LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */
++    0xf8ca001a, /* 002C(:381):      LCDEXT: idx2 = *(idx1 + var20 + 8); idx2 once var0; idx2 += inc3 */
++    0xb8ca601b, /* 0030(:382):      LCD: idx3 = *(idx1 + var20 + 12); ; idx3 += inc3 */
++    0x10004310, /* 0034(:384):        DRD1A: var16 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x00001718, /* 0038(:385):        DRD1A: var5 = idx3; FN=0 init=0 WS=0 RS=0 */
++    0xb8ca001d, /* 003C(:387):      LCD: idx2 = *(idx1 + var20 + 20); idx2 once var0; idx2 += inc3 */
++    0x10001f10, /* 0040(:388):        DRD1A: var7 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x60000007, /* 0044(:389):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=7 EXT init=0 WS=0 RS=0 */
++    0x020cf893, /* 0048(:389):        DRD2B1: var8 = EU3(); EU3(idx2,var19)  */
++    0x98ca001c, /* 004C(:391):      LCD: idx2 = idx1 + var20 + 4; idx2 once var0; idx2 += inc3 */
++    0x00000710, /* 0050(:392):        DRD1A: var1 = idx2; FN=0 init=0 WS=0 RS=0 */
++    0x98ca8018, /* 0054(:393):      LCD: idx2 = idx1 + var21; idx2 once var0; idx2 += inc3 */
++    0x10002b10, /* 0058(:394):        DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x0000c828, /* 005C(:395):        DRD1A: *idx2 = var5; FN=0 init=0 WS=0 RS=0 */
++    0x000001f8, /* 0060(:0):      NOP */
++    0xc14ae018, /* 0064(:399):    LCDEXT: idx1 = var2 + var21; ; idx1 += inc3 */
++    0xc004a51d, /* 0068(:399):    LCDEXT: idx2 = var0, idx3 = var9; idx3 == var20; idx2 += inc3, idx3 += inc5 */
++    0x811a601b, /* 006C(:400):    LCD: idx4 = var2; ; idx4 += inc3 */
++    0xc28a21c2, /* 0070(:403):      LCDEXT: idx5 = var5, idx6 = var20; idx6 < var7; idx5 += inc0, idx6 += inc2 */
++    0x881be009, /* 0074(:403):      LCD: idx7 = var16; ; idx7 += inc1 */
++    0x03fed7b8, /* 0078(:406):        DRD1A: *idx7; FN=0 init=31 WS=3 RS=3 */
++    0xda9b001b, /* 007C(:408):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 0080(:408):      LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x1000cb20, /* 0084(:409):        DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 0088(:410):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf896, /* 008C(:410):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x1000cb28, /* 0090(:411):        DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 0094(:412):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf896, /* 0098(:412):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x1000cb30, /* 009C(:413):        DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00A0(:414):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf896, /* 00A4(:414):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x1000cb38, /* 00A8(:415):        DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */
++    0x0000c728, /* 00AC(:416):        DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */
++    0x000001f8, /* 00B0(:0):      NOP */
++    0xc14ae018, /* 00B4(:420):    LCDEXT: idx1 = var2 + var21; ; idx1 += inc3 */
++    0xc004a5dd, /* 00B8(:420):    LCDEXT: idx2 = var0, idx3 = var9; idx3 == var23; idx2 += inc3, idx3 += inc5 */
++    0x811a601b, /* 00BC(:421):    LCD: idx4 = var2; ; idx4 += inc3 */
++    0xda9b001b, /* 00C0(:424):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 00C4(:424):      LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x0000d3a0, /* 00C8(:425):        DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */
++    0xc28a21c2, /* 00CC(:427):      LCDEXT: idx5 = var5, idx6 = var20; idx6 < var7; idx5 += inc0, idx6 += inc2 */
++    0x881be009, /* 00D0(:427):      LCD: idx7 = var16; ; idx7 += inc1 */
++    0x0bfed7b8, /* 00D4(:430):        DRD1A: *idx7; FN=0 TFD init=31 WS=3 RS=3 */
++    0xda9b001b, /* 00D8(:432):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 00DC(:432):      LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x1000cb20, /* 00E0(:433):        DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00E4(:434):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf896, /* 00E8(:434):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x1000cb28, /* 00EC(:435):        DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00F0(:436):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf896, /* 00F4(:436):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x1000cb30, /* 00F8(:437):        DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00FC(:438):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf896, /* 0100(:438):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x1000cb38, /* 0104(:439):        DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */
++    0x0000c728, /* 0108(:440):        DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */
++    0x000001f8, /* 010C(:0):      NOP */
++    0x8118801b, /* 0110(:444):    LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */
++    0x8a19001b, /* 0114(:446):      LCD: idx2 = var20; idx2 once var0; idx2 += inc3 */
++    0x6000000e, /* 0118(:447):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */
++    0x088cf49f, /* 011C(:447):        DRD2B1: idx2 = EU3(); EU3(var18)  */
++    0xd9190536, /* 0120(:448):      LCDEXT: idx2 = idx2; idx2 == var20; idx2 += inc6 */
++    0x98ca0018, /* 0124(:448):      LCD: idx3 = idx1 + var20; idx3 once var0; idx3 += inc3 */
++    0x6000000a, /* 0128(:450):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
++    0x0cccfcdf, /* 012C(:450):        DRD2B1: *idx3 = EU3(); EU3(*idx3)  */
++    0x000001f8, /* 0130(:0):      NOP */
++    0xa14a001e, /* 0134(:453):    LCD: idx1 = *(var2 + var20 + 24); idx1 once var0; idx1 += inc3 */
++    0x10000b08, /* 0138(:454):      DRD1A: var2 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
++    0x10002c90, /* 013C(:455):      DRD1A: var11 = var18; FN=0 MORE init=0 WS=0 RS=0 */
++    0xb8ca0018, /* 0140(:456):      LCD: idx2 = *(idx1 + var20); idx2 once var0; idx2 += inc3 */
++    0x10004b10, /* 0144(:457):        DRD1A: var18 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000009, /* 0148(:458):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT MORE init=0 WS=0 RS=0 */
++    0x080cf89f, /* 014C(:458):        DRD2B1: idx0 = EU3(); EU3(idx2)  */
++    0x6000000c, /* 0150(:459):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT init=0 WS=0 RS=0 */
++    0x024cf89f, /* 0154(:459):        DRD2B1: var9 = EU3(); EU3(idx2)  */
++    0x000001f8, /* 0158(:0):      NOP */
++    0x8a18801b, /* 015C(:465):    LCD: idx1 = var20; idx1 once var0; idx1 += inc3 */
++    0x7000000d, /* 0160(:466):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
++    0x084cf2df, /* 0164(:466):      DRD2B1: idx1 = EU3(); EU3(var11)  */
++    0xd899053f, /* 0168(:467):      LCDEXT: idx2 = idx1; idx2 > var20; idx2 += inc7 */
++    0x8019801b, /* 016C(:467):      LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */
++    0x040001f8, /* 0170(:468):        DRD1A: FN=0 INT init=0 WS=0 RS=0 */
++    0x000001f8, /* 0174(:0):      NOP */
++    0x000001f8, /* 0178(:0):    NOP */
++};
++u32 MCD_SingleNoEu_TDT[]=
++{
++    0x8318001b, /* 0000(:646):  LCD: idx0 = var6; idx0 once var0; idx0 += inc3 */
++    0x7000000c, /* 0004(:647):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
++    0x080cf81f, /* 0008(:647):    DRD2B1: idx0 = EU3(); EU3(idx0)  */
++    0x8318801b, /* 000C(:648):    LCD: idx1 = var6; idx1 once var0; idx1 += inc3 */
++    0x6000000d, /* 0010(:649):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */
++    0x084cf85f, /* 0014(:649):      DRD2B1: idx1 = EU3(); EU3(idx1)  */
++    0x000001f8, /* 0018(:0):    NOP */
++    0x8498001b, /* 001C(:653):  LCD: idx0 = var9; idx0 once var0; idx0 += inc3 */
++    0x7000000c, /* 0020(:654):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
++    0x020cf81f, /* 0024(:654):    DRD2B1: var8 = EU3(); EU3(idx0)  */
++    0x6000000d, /* 0028(:655):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */
++    0x028cf81f, /* 002C(:655):    DRD2B1: var10 = EU3(); EU3(idx0)  */
++    0xc404601b, /* 0030(:658):  LCDEXT: idx0 = var8, idx1 = var8; ; idx0 += inc3, idx1 += inc3 */
++    0xc00423dc, /* 0034(:658):  LCDEXT: idx2 = var0, idx3 = var8; idx3 == var15; idx2 += inc3, idx3 += inc4 */
++    0x809a601b, /* 0038(:659):  LCD: idx4 = var1; ; idx4 += inc3 */
++    0xc207a182, /* 003C(:662):    LCDEXT: idx5 = var4, idx6 = var15; idx6 < var6; idx5 += inc0, idx6 += inc2 */
++    0x869be009, /* 0040(:662):    LCD: idx7 = var13; ; idx7 += inc1 */
++    0x03fed7b8, /* 0044(:665):      DRD1A: *idx7; FN=0 init=31 WS=3 RS=3 */
++    0xda9b001b, /* 0048(:667):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 004C(:667):    LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x70000006, /* 0050(:669):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf890, /* 0054(:669):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
++    0x1000cb28, /* 0058(:670):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 005C(:671):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf890, /* 0060(:671):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
++    0x1000cb30, /* 0064(:672):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 0068(:673):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf890, /* 006C(:673):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
++    0x0000cb38, /* 0070(:674):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
++    0x000001f8, /* 0074(:0):    NOP */
++    0xc404601b, /* 0078(:678):  LCDEXT: idx0 = var8, idx1 = var8; ; idx0 += inc3, idx1 += inc3 */
++    0xc004245c, /* 007C(:678):  LCDEXT: idx2 = var0, idx3 = var8; idx3 == var17; idx2 += inc3, idx3 += inc4 */
++    0x809a601b, /* 0080(:679):  LCD: idx4 = var1; ; idx4 += inc3 */
++    0xda9b001b, /* 0084(:682):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 0088(:682):    LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x0000d3a0, /* 008C(:683):      DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */
++    0xc207a182, /* 0090(:685):    LCDEXT: idx5 = var4, idx6 = var15; idx6 < var6; idx5 += inc0, idx6 += inc2 */
++    0x869be009, /* 0094(:685):    LCD: idx7 = var13; ; idx7 += inc1 */
++    0x0bfed7b8, /* 0098(:688):      DRD1A: *idx7; FN=0 TFD init=31 WS=3 RS=3 */
++    0xda9b001b, /* 009C(:690):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 00A0(:690):    LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x70000006, /* 00A4(:692):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf890, /* 00A8(:692):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
++    0x1000cb28, /* 00AC(:693):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00B0(:694):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf890, /* 00B4(:694):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
++    0x1000cb30, /* 00B8(:695):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00BC(:696):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf890, /* 00C0(:696):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
++    0x0000cb38, /* 00C4(:697):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
++    0x000001f8, /* 00C8(:0):    NOP */
++    0xc51803ed, /* 00CC(:701):  LCDEXT: idx0 = var10; idx0 > var15; idx0 += inc5 */
++    0x8018801b, /* 00D0(:701):  LCD: idx1 = var0; idx1 once var0; idx1 += inc3 */
++    0x040001f8, /* 00D4(:702):    DRD1A: FN=0 INT init=0 WS=0 RS=0 */
++};
++#ifdef MCD_INCLUDE_EU
++u32 MCD_ChainEu_TDT[]=
++{
++    0x80004000, /* 0000(:928):  LCDEXT: idx0 = 0x00000000; ; */
++    0x8118801b, /* 0004(:928):  LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */
++    0xb8ca0018, /* 0008(:929):    LCD: idx2 = *(idx1 + var20); idx2 once var0; idx2 += inc3 */
++    0x10004b10, /* 000C(:930):      DRD1A: var18 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x7000000c, /* 0010(:931):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
++    0x024cf89f, /* 0014(:931):      DRD2B1: var9 = EU3(); EU3(idx2)  */
++    0x60000009, /* 0018(:932):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT init=0 WS=0 RS=0 */
++    0x080cf89f, /* 001C(:932):      DRD2B1: idx0 = EU3(); EU3(idx2)  */
++    0x000001f8, /* 0020(:0):    NOP */
++    0x98180524, /* 0024(:936):  LCD: idx0 = idx0; idx0 != var20; idx0 += inc4 */
++    0x8118801b, /* 0028(:938):    LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */
++    0xf8ca001a, /* 002C(:939):      LCDEXT: idx2 = *(idx1 + var20 + 8); idx2 once var0; idx2 += inc3 */
++    0xb8ca601b, /* 0030(:940):      LCD: idx3 = *(idx1 + var20 + 12); ; idx3 += inc3 */
++    0x10004310, /* 0034(:942):        DRD1A: var16 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x00001718, /* 0038(:943):        DRD1A: var5 = idx3; FN=0 init=0 WS=0 RS=0 */
++    0xb8ca001d, /* 003C(:945):      LCD: idx2 = *(idx1 + var20 + 20); idx2 once var0; idx2 += inc3 */
++    0x10001f10, /* 0040(:946):        DRD1A: var7 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x60000007, /* 0044(:947):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=7 EXT init=0 WS=0 RS=0 */
++    0x020cf893, /* 0048(:947):        DRD2B1: var8 = EU3(); EU3(idx2,var19)  */
++    0x98ca001c, /* 004C(:949):      LCD: idx2 = idx1 + var20 + 4; idx2 once var0; idx2 += inc3 */
++    0x00000710, /* 0050(:950):        DRD1A: var1 = idx2; FN=0 init=0 WS=0 RS=0 */
++    0x98ca8018, /* 0054(:951):      LCD: idx2 = idx1 + var21; idx2 once var0; idx2 += inc3 */
++    0x10002b10, /* 0058(:952):        DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x0000c828, /* 005C(:953):        DRD1A: *idx2 = var5; FN=0 init=0 WS=0 RS=0 */
++    0x000001f8, /* 0060(:0):      NOP */
++    0xc14ae018, /* 0064(:957):    LCDEXT: idx1 = var2 + var21; ; idx1 += inc3 */
++    0xc004a51d, /* 0068(:957):    LCDEXT: idx2 = var0, idx3 = var9; idx3 == var20; idx2 += inc3, idx3 += inc5 */
++    0x811a601b, /* 006C(:958):    LCD: idx4 = var2; ; idx4 += inc3 */
++    0xc28a21c2, /* 0070(:961):      LCDEXT: idx5 = var5, idx6 = var20; idx6 < var7; idx5 += inc0, idx6 += inc2 */
++    0x881be009, /* 0074(:961):      LCD: idx7 = var16; ; idx7 += inc1 */
++    0x63fe0000, /* 0078(:964):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=31 WS=3 RS=3 */
++    0x0d4cfddf, /* 007C(:964):        DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
++    0xda9b001b, /* 0080(:966):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 0084(:966):      LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x1000cb20, /* 0088(:967):        DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 008C(:968):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf896, /* 0090(:968):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x1000cb28, /* 0094(:969):        DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 0098(:970):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf896, /* 009C(:970):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x1000cb30, /* 00A0(:971):        DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00A4(:972):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf896, /* 00A8(:972):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x1000cb38, /* 00AC(:973):        DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */
++    0x0000c728, /* 00B0(:974):        DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */
++    0x000001f8, /* 00B4(:0):      NOP */
++    0xc14ae018, /* 00B8(:978):    LCDEXT: idx1 = var2 + var21; ; idx1 += inc3 */
++    0xc004a5dd, /* 00BC(:978):    LCDEXT: idx2 = var0, idx3 = var9; idx3 == var23; idx2 += inc3, idx3 += inc5 */
++    0x811a601b, /* 00C0(:979):    LCD: idx4 = var2; ; idx4 += inc3 */
++    0xda9b001b, /* 00C4(:982):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 00C8(:982):      LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x0000d3a0, /* 00CC(:983):        DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */
++    0xc28a21c2, /* 00D0(:985):      LCDEXT: idx5 = var5, idx6 = var20; idx6 < var7; idx5 += inc0, idx6 += inc2 */
++    0x881be009, /* 00D4(:985):      LCD: idx7 = var16; ; idx7 += inc1 */
++    0x6bfe0000, /* 00D8(:988):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 TFD EXT init=31 WS=3 RS=3 */
++    0x0d4cfddf, /* 00DC(:988):        DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
++    0xda9b001b, /* 00E0(:990):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 00E4(:990):      LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x1000cb20, /* 00E8(:991):        DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00EC(:992):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf896, /* 00F0(:992):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x1000cb28, /* 00F4(:993):        DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00F8(:994):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf896, /* 00FC(:994):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x1000cb30, /* 0100(:995):        DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 0104(:996):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf896, /* 0108(:996):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x1000cb38, /* 010C(:997):        DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */
++    0x0000c728, /* 0110(:998):        DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */
++    0x000001f8, /* 0114(:0):      NOP */
++    0x8118801b, /* 0118(:1002):    LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */
++    0x8a19001b, /* 011C(:1004):      LCD: idx2 = var20; idx2 once var0; idx2 += inc3 */
++    0x6000000e, /* 0120(:1005):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */
++    0x088cf49f, /* 0124(:1005):        DRD2B1: idx2 = EU3(); EU3(var18)  */
++    0xd9190536, /* 0128(:1006):      LCDEXT: idx2 = idx2; idx2 == var20; idx2 += inc6 */
++    0x98ca0018, /* 012C(:1006):      LCD: idx3 = idx1 + var20; idx3 once var0; idx3 += inc3 */
++    0x6000000a, /* 0130(:1008):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
++    0x0cccfcdf, /* 0134(:1008):        DRD2B1: *idx3 = EU3(); EU3(*idx3)  */
++    0x000001f8, /* 0138(:0):      NOP */
++    0xa14a001e, /* 013C(:1011):    LCD: idx1 = *(var2 + var20 + 24); idx1 once var0; idx1 += inc3 */
++    0x10000b08, /* 0140(:1012):      DRD1A: var2 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
++    0x10002c90, /* 0144(:1013):      DRD1A: var11 = var18; FN=0 MORE init=0 WS=0 RS=0 */
++    0xb8ca0018, /* 0148(:1014):      LCD: idx2 = *(idx1 + var20); idx2 once var0; idx2 += inc3 */
++    0x10004b10, /* 014C(:1015):        DRD1A: var18 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000009, /* 0150(:1016):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT MORE init=0 WS=0 RS=0 */
++    0x080cf89f, /* 0154(:1016):        DRD2B1: idx0 = EU3(); EU3(idx2)  */
++    0x6000000c, /* 0158(:1017):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT init=0 WS=0 RS=0 */
++    0x024cf89f, /* 015C(:1017):        DRD2B1: var9 = EU3(); EU3(idx2)  */
++    0x000001f8, /* 0160(:0):      NOP */
++    0x8a18801b, /* 0164(:1023):    LCD: idx1 = var20; idx1 once var0; idx1 += inc3 */
++    0x7000000d, /* 0168(:1024):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
++    0x084cf2df, /* 016C(:1024):      DRD2B1: idx1 = EU3(); EU3(var11)  */
++    0xd899053f, /* 0170(:1025):      LCDEXT: idx2 = idx1; idx2 > var20; idx2 += inc7 */
++    0x8019801b, /* 0174(:1025):      LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */
++    0x040001f8, /* 0178(:1026):        DRD1A: FN=0 INT init=0 WS=0 RS=0 */
++    0x000001f8, /* 017C(:0):      NOP */
++    0x000001f8, /* 0180(:0):    NOP */
++};
++u32 MCD_SingleEu_TDT[]=
++{
++    0x8318001b, /* 0000(:1204):  LCD: idx0 = var6; idx0 once var0; idx0 += inc3 */
++    0x7000000c, /* 0004(:1205):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
++    0x080cf81f, /* 0008(:1205):    DRD2B1: idx0 = EU3(); EU3(idx0)  */
++    0x8318801b, /* 000C(:1206):    LCD: idx1 = var6; idx1 once var0; idx1 += inc3 */
++    0x6000000d, /* 0010(:1207):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */
++    0x084cf85f, /* 0014(:1207):      DRD2B1: idx1 = EU3(); EU3(idx1)  */
++    0x000001f8, /* 0018(:0):    NOP */
++    0x8498001b, /* 001C(:1211):  LCD: idx0 = var9; idx0 once var0; idx0 += inc3 */
++    0x7000000c, /* 0020(:1212):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
++    0x020cf81f, /* 0024(:1212):    DRD2B1: var8 = EU3(); EU3(idx0)  */
++    0x6000000d, /* 0028(:1213):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */
++    0x028cf81f, /* 002C(:1213):    DRD2B1: var10 = EU3(); EU3(idx0)  */
++    0xc404601b, /* 0030(:1216):  LCDEXT: idx0 = var8, idx1 = var8; ; idx0 += inc3, idx1 += inc3 */
++    0xc00423dc, /* 0034(:1216):  LCDEXT: idx2 = var0, idx3 = var8; idx3 == var15; idx2 += inc3, idx3 += inc4 */
++    0x809a601b, /* 0038(:1217):  LCD: idx4 = var1; ; idx4 += inc3 */
++    0xc207a182, /* 003C(:1220):    LCDEXT: idx5 = var4, idx6 = var15; idx6 < var6; idx5 += inc0, idx6 += inc2 */
++    0x869be009, /* 0040(:1220):    LCD: idx7 = var13; ; idx7 += inc1 */
++    0x63fe0000, /* 0044(:1223):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=31 WS=3 RS=3 */
++    0x0d4cfddf, /* 0048(:1223):      DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
++    0xda9b001b, /* 004C(:1225):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 0050(:1225):    LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x70000006, /* 0054(:1227):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf890, /* 0058(:1227):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
++    0x1000cb28, /* 005C(:1228):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 0060(:1229):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf890, /* 0064(:1229):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
++    0x1000cb30, /* 0068(:1230):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 006C(:1231):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf890, /* 0070(:1231):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
++    0x0000cb38, /* 0074(:1232):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
++    0x000001f8, /* 0078(:0):    NOP */
++    0xc404601b, /* 007C(:1236):  LCDEXT: idx0 = var8, idx1 = var8; ; idx0 += inc3, idx1 += inc3 */
++    0xc004245c, /* 0080(:1236):  LCDEXT: idx2 = var0, idx3 = var8; idx3 == var17; idx2 += inc3, idx3 += inc4 */
++    0x809a601b, /* 0084(:1237):  LCD: idx4 = var1; ; idx4 += inc3 */
++    0xda9b001b, /* 0088(:1240):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 008C(:1240):    LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x0000d3a0, /* 0090(:1241):      DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */
++    0xc207a182, /* 0094(:1243):    LCDEXT: idx5 = var4, idx6 = var15; idx6 < var6; idx5 += inc0, idx6 += inc2 */
++    0x869be009, /* 0098(:1243):    LCD: idx7 = var13; ; idx7 += inc1 */
++    0x6bfe0000, /* 009C(:1246):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 TFD EXT init=31 WS=3 RS=3 */
++    0x0d4cfddf, /* 00A0(:1246):      DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
++    0xda9b001b, /* 00A4(:1248):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 00A8(:1248):    LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x70000006, /* 00AC(:1250):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf890, /* 00B0(:1250):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
++    0x1000cb28, /* 00B4(:1251):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00B8(:1252):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf890, /* 00BC(:1252):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
++    0x1000cb30, /* 00C0(:1253):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00C4(:1254):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf890, /* 00C8(:1254):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
++    0x0000cb38, /* 00CC(:1255):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
++    0x000001f8, /* 00D0(:0):    NOP */
++    0xc51803ed, /* 00D4(:1259):  LCDEXT: idx0 = var10; idx0 > var15; idx0 += inc5 */
++    0x8018801b, /* 00D8(:1259):  LCD: idx1 = var0; idx1 once var0; idx1 += inc3 */
++    0x040001f8, /* 00DC(:1260):    DRD1A: FN=0 INT init=0 WS=0 RS=0 */
++};
++#endif
++u32 MCD_ENetRcv_TDT[]=
++{
++    0x80004000, /* 0000(:1334):  LCDEXT: idx0 = 0x00000000; ; */
++    0x82188000, /* 0004(:1334):  LCD: idx1 = var4; idx1 once var0; idx1 += inc0 */
++    0x10000788, /* 0008(:1335):    DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
++    0x60000009, /* 000C(:1336):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT init=0 WS=0 RS=0 */
++    0x080cf05f, /* 0010(:1336):    DRD2B1: idx0 = EU3(); EU3(var1)  */
++    0x98180249, /* 0014(:1339):  LCD: idx0 = idx0; idx0 != var9; idx0 += inc1 */
++    0x82448004, /* 0018(:1341):    LCD: idx1 = var4 + var9 + 4; idx1 once var0; idx1 += inc0 */
++    0x7000000d, /* 001C(:1342):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
++    0x014cf05f, /* 0020(:1342):      DRD2B1: var5 = EU3(); EU3(var1)  */
++    0x7000000b, /* 0024(:1343):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT MORE init=0 WS=0 RS=0 */
++    0x020cf05f, /* 0028(:1343):      DRD2B1: var8 = EU3(); EU3(var1)  */
++    0x70000004, /* 002C(:1344):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */
++    0x018cf04a, /* 0030(:1344):      DRD2B1: var6 = EU3(); EU3(var1,var10)  */
++    0x70000004, /* 0034(:1345):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */
++    0x004cf04b, /* 0038(:1345):      DRD2B1: var1 = EU3(); EU3(var1,var11)  */
++    0x00000b88, /* 003C(:1348):      DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */
++    0xc4838190, /* 0040(:1351):    LCDEXT: idx1 = var9, idx2 = var7; idx1 < var6; idx1 += inc2, idx2 += inc0 */
++    0x8119e012, /* 0044(:1351):    LCD: idx3 = var2; ; idx3 += inc2 */
++    0x03e0cf90, /* 0048(:1354):      DRD1A: *idx3 = *idx2; FN=0 init=31 WS=0 RS=0 */
++    0x81188000, /* 004C(:1357):    LCD: idx1 = var2; idx1 once var0; idx1 += inc0 */
++    0x000ac788, /* 0050(:1358):      DRD1A: *idx1 = *idx1; FN=0 init=0 WS=1 RS=1 */
++    0xc4838000, /* 0054(:1360):    LCDEXT: idx1 = var9, idx2 = var7; idx1 once var0; idx1 += inc0, idx2 += inc0 */
++    0x8219e000, /* 0058(:1360):    LCD: idx3 = var4; ; idx3 += inc0 */
++    0x70000004, /* 005C(:1368):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */
++    0x084cfc8c, /* 0060(:1368):      DRD2B1: idx1 = EU3(); EU3(*idx2,var12)  */
++    0x60000005, /* 0064(:1371):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */
++    0x0cccf841, /* 0068(:1371):      DRD2B1: *idx3 = EU3(); EU3(idx1,var1)  */
++    0x82468000, /* 006C(:1377):    LCD: idx1 = var4 + var13; idx1 once var0; idx1 += inc0 */
++    0xc419025b, /* 0070(:1379):      LCDEXT: idx2 = var8; idx2 > var9; idx2 += inc3 */
++    0x80198000, /* 0074(:1379):      LCD: idx3 = var0; idx3 once var0; idx3 += inc0 */
++    0x00008400, /* 0078(:1380):        DRD1A: idx1 = var0; FN=0 init=0 WS=0 RS=0 */
++    0x00001308, /* 007C(:1381):      DRD1A: var4 = idx1; FN=0 init=0 WS=0 RS=0 */
++    0x82188000, /* 0080(:1384):    LCD: idx1 = var4; idx1 once var0; idx1 += inc0 */
++    0x10000788, /* 0084(:1385):      DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
++    0x60000009, /* 0088(:1386):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT init=0 WS=0 RS=0 */
++    0x080cf05f, /* 008C(:1386):      DRD2B1: idx0 = EU3(); EU3(var1)  */
++    0xc2988249, /* 0090(:1389):    LCDEXT: idx1 = var5; idx1 != var9; idx1 += inc1 */
++    0x80190000, /* 0094(:1389):    LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
++    0x040001f8, /* 0098(:1390):      DRD1A: FN=0 INT init=0 WS=0 RS=0 */
++    0x000001f8, /* 009C(:0):    NOP */
++};
++u32 MCD_ENetXmit_TDT[]=
++{
++    0x80004000, /* 0000(:1465):  LCDEXT: idx0 = 0x00000000; ; */
++    0x81988000, /* 0004(:1465):  LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
++    0x10000788, /* 0008(:1466):    DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
++    0x60000009, /* 000C(:1467):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT init=0 WS=0 RS=0 */
++    0x080cf05f, /* 0010(:1467):    DRD2B1: idx0 = EU3(); EU3(var1)  */
++    0x98180309, /* 0014(:1470):  LCD: idx0 = idx0; idx0 != var12; idx0 += inc1 */
++    0x80004003, /* 0018(:1472):    LCDEXT: idx1 = 0x00000003; ; */
++    0x81c60004, /* 001C(:1472):    LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */
++    0x7000000d, /* 0020(:1473):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
++    0x014cf05f, /* 0024(:1473):      DRD2B1: var5 = EU3(); EU3(var1)  */
++    0x7000000b, /* 0028(:1474):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT MORE init=0 WS=0 RS=0 */
++    0x028cf05f, /* 002C(:1474):      DRD2B1: var10 = EU3(); EU3(var1)  */
++    0x7000000c, /* 0030(:1475):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
++    0x018cf05f, /* 0034(:1475):      DRD2B1: var6 = EU3(); EU3(var1)  */
++    0x70000004, /* 0038(:1476):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */
++    0x01ccf04d, /* 003C(:1476):      DRD2B1: var7 = EU3(); EU3(var1,var13)  */
++    0x10000b90, /* 0040(:1477):      DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x60000004, /* 0044(:1478):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT init=0 WS=0 RS=0 */
++    0x020cf0a1, /* 0048(:1478):      DRD2B1: var8 = EU3(); EU3(var2,idx1)  */
++    0xc3188312, /* 004C(:1481):    LCDEXT: idx1 = var6; idx1 > var12; idx1 += inc2 */
++    0x83c70000, /* 0050(:1481):    LCD: idx2 = var7 + var14; idx2 once var0; idx2 += inc0 */
++    0x00001f10, /* 0054(:1482):      DRD1A: var7 = idx2; FN=0 init=0 WS=0 RS=0 */
++    0xc583a3c3, /* 0058(:1484):    LCDEXT: idx1 = var11, idx2 = var7; idx2 >= var15; idx1 += inc0, idx2 += inc3 */
++    0x81042325, /* 005C(:1484):    LCD: idx3 = var2, idx4 = var8; idx4 == var12; idx3 += inc4, idx4 += inc5 */
++    0x03e0c798, /* 0060(:1489):      DRD1A: *idx1 = *idx3; FN=0 init=31 WS=0 RS=0 */
++    0xd8990000, /* 0064(:1492):    LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */
++    0x9999e000, /* 0068(:1492):    LCD: idx3 = idx3; ; idx3 += inc0 */
++    0x000acf98, /* 006C(:1493):      DRD1A: *idx3 = *idx3; FN=0 init=0 WS=1 RS=1 */
++    0xd8992306, /* 0070(:1495):    LCDEXT: idx1 = idx1, idx2 = idx2; idx2 > var12; idx1 += inc0, idx2 += inc6 */
++    0x9999e03f, /* 0074(:1495):    LCD: idx3 = idx3; ; idx3 += inc7 */
++    0x03eac798, /* 0078(:1498):      DRD1A: *idx1 = *idx3; FN=0 init=31 WS=1 RS=1 */
++    0xd8990000, /* 007C(:1501):    LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */
++    0x9999e000, /* 0080(:1501):    LCD: idx3 = idx3; ; idx3 += inc0 */
++    0x000acf98, /* 0084(:1502):      DRD1A: *idx3 = *idx3; FN=0 init=0 WS=1 RS=1 */
++    0xd8990000, /* 0088(:1504):    LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */
++    0x99832302, /* 008C(:1504):    LCD: idx3 = idx3, idx4 = var6; idx4 > var12; idx3 += inc0, idx4 += inc2 */
++    0x0beac798, /* 0090(:1507):      DRD1A: *idx1 = *idx3; FN=0 TFD init=31 WS=1 RS=1 */
++    0x81988000, /* 0094(:1509):    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
++    0x6000000a, /* 0098(:1510):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
++    0x0c4cfc5f, /* 009C(:1510):      DRD2B1: *idx1 = EU3(); EU3(*idx1)  */
++    0x81c80000, /* 00A0(:1512):    LCD: idx1 = var3 + var16; idx1 once var0; idx1 += inc0 */
++    0xc5190312, /* 00A4(:1514):      LCDEXT: idx2 = var10; idx2 > var12; idx2 += inc2 */
++    0x80198000, /* 00A8(:1514):      LCD: idx3 = var0; idx3 once var0; idx3 += inc0 */
++    0x00008400, /* 00AC(:1515):        DRD1A: idx1 = var0; FN=0 init=0 WS=0 RS=0 */
++    0x00000f08, /* 00B0(:1516):      DRD1A: var3 = idx1; FN=0 init=0 WS=0 RS=0 */
++    0x81988000, /* 00B4(:1519):    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
++    0x10000788, /* 00B8(:1520):      DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
++    0x60000009, /* 00BC(:1521):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT init=0 WS=0 RS=0 */
++    0x080cf05f, /* 00C0(:1521):      DRD2B1: idx0 = EU3(); EU3(var1)  */
++    0xc2988309, /* 00C4(:1524):    LCDEXT: idx1 = var5; idx1 != var12; idx1 += inc1 */
++    0x80190000, /* 00C8(:1524):    LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
++    0x040001f8, /* 00CC(:1525):      DRD1A: FN=0 INT init=0 WS=0 RS=0 */
++    0x000001f8, /* 00D0(:0):    NOP */
++};
++
+--- /dev/null
++++ b/drivers/dma/MCD_tasksInit.c
+@@ -0,0 +1,284 @@
++/*********************************************************************
++ *
++ * Copyright (C) 2004  Motorola, Inc.
++ *	MOTOROLA, INC. All Rights Reserved.  
++ *  You are hereby granted a copyright license to use
++ *  the SOFTWARE so long as this entire notice is
++ *  retained without alteration in any modified and/or redistributed
++ *  versions, and that such modified versions are clearly identified
++ *  as such. No licenses are granted by implication, estoppel or
++ *  otherwise under any patents or trademarks of Motorola, Inc. This 
++ *  software is provided on an "AS IS" basis and without warranty.
++ *
++ *  To the maximum extent permitted by applicable law, MOTOROLA 
++ *  DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING 
++ *  IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
++ *  PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE 
++ *  SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY 
++ *  ACCOMPANYING WRITTEN MATERIALS.
++ * 
++ *  To the maximum extent permitted by applicable law, IN NO EVENT
++ *  SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING 
++ *  WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS 
++ *  INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY
++ *  LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.   
++ * 
++ *  Motorola assumes no responsibility for the maintenance and support
++ *  of this software
++ ********************************************************************/
++/*
++ * Do not edit!
++ */
++ /*
++ * File:		MCD_tasksInit.c
++ * Purpose:		Function for initialize variable tables of different
++ *              types of tasks.
++ *
++ * Notes:
++ *
++ *
++ * Modifications:
++ *  	
++ *
++ */ 
++
++#include <asm/MCD_dma.h>
++
++extern dmaRegs *MCD_dmaBar;
++
++/*
++ * Task 0
++ */
++
++void  MCD_startDmaChainNoEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel)
++{
++
++	MCD_SET_VAR(taskTable+channel, 2, (u32)currBD);	/* var[2] */
++	MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));	/* inc[1] */
++	MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));	/* inc[0] */
++	MCD_SET_VAR(taskTable+channel, 19, (u32)xferSize);	/* var[19] */
++	MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));	/* inc[2] */
++	MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);	/* var[0] */
++	MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000);	/* var[1] */
++	MCD_SET_VAR(taskTable+channel, 3, (u32)0x00000000);	/* var[3] */
++	MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000);	/* var[4] */
++	MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000);	/* var[5] */
++	MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000);	/* var[6] */
++	MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000);	/* var[7] */
++	MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000);	/* var[8] */
++	MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000);	/* var[9] */
++	MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);	/* var[10] */
++	MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000000);	/* var[11] */
++	MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000);	/* var[12] */
++	MCD_SET_VAR(taskTable+channel, 13, (u32)0x00000000);	/* var[13] */
++	MCD_SET_VAR(taskTable+channel, 14, (u32)0x00000000);	/* var[14] */
++	MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000000);	/* var[15] */
++	MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000000);	/* var[16] */
++	MCD_SET_VAR(taskTable+channel, 17, (u32)0x00000000);	/* var[17] */
++	MCD_SET_VAR(taskTable+channel, 18, (u32)0x00000000);	/* var[18] */
++	MCD_SET_VAR(taskTable+channel, 20, (u32)0x00000000);	/* var[20] */
++	MCD_SET_VAR(taskTable+channel, 21, (u32)0x00000010);	/* var[21] */
++	MCD_SET_VAR(taskTable+channel, 22, (u32)0x00000004);	/* var[22] */
++	MCD_SET_VAR(taskTable+channel, 23, (u32)0x00000080);	/* var[23] */
++	MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);	/* inc[3] */
++	MCD_SET_VAR(taskTable+channel, 28, (u32)0x60000000);	/* inc[4] */
++	MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000001);	/* inc[5] */
++	MCD_SET_VAR(taskTable+channel, 30, (u32)0x80000000);	/* inc[6] */
++	MCD_SET_VAR(taskTable+channel, 31, (u32)0x40000000);	/* inc[7] */
++
++    /* Set the task's Enable bit in its Task Control Register */
++    MCD_dmaBar->taskControl[channel] |= (u16)0x8000; /* add a MACRO HERE TBD*/
++	
++
++}
++
++
++/*
++ * Task 1
++ */
++ 
++void  MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, int dmaSizeMXferSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel)
++{
++	
++	MCD_SET_VAR(taskTable+channel, 13, (u32)srcAddr);	/* var[13] */
++	MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));	/* inc[1] */
++	MCD_SET_VAR(taskTable+channel, 4, (u32)destAddr);	/* var[4] */
++	MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));	/* inc[0] */
++	MCD_SET_VAR(taskTable+channel, 6, (u32)dmaSize);	/* var[6] */
++	MCD_SET_VAR(taskTable+channel, 7, (u32)dmaSizeMXferSize);	/* var[7] */
++	MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));	/* inc[2] */
++	MCD_SET_VAR(taskTable+channel, 9, (u32)flags);	/* var[9] */
++	MCD_SET_VAR(taskTable+channel, 1, (u32)currBD);	/* var[1] */
++	MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);	/* var[0] */
++	MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000);	/* var[2] */
++	MCD_SET_VAR(taskTable+channel, 3, (u32)0x00000000);	/* var[3] */
++	MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000);	/* var[5] */
++	MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000);	/* var[8] */
++	MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);	/* var[10] */
++	MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000000);	/* var[11] */
++	MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000);	/* var[12] */
++	MCD_SET_VAR(taskTable+channel, 14, (u32)0x00000000);	/* var[14] */
++	MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000000);	/* var[15] */
++	MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000004);	/* var[16] */
++	MCD_SET_VAR(taskTable+channel, 17, (u32)0x00000080);	/* var[17] */
++	MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);	/* inc[3] */
++	MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000001);	/* inc[4] */
++	MCD_SET_VAR(taskTable+channel, 29, (u32)0x40000000);	/* inc[5] */
++
++
++    /* enable the task */
++    MCD_dmaBar->taskControl[channel] |= (u16)0x8000; /* add a MACRO HERE TBD*/
++}
++
++
++/*
++ * Task 2
++ */
++ 
++void  MCD_startDmaChainEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel)
++{
++	
++	MCD_SET_VAR(taskTable+channel, 2, (u32)currBD);	/* var[2] */
++	MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));	/* inc[1] */
++	MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));	/* inc[0] */
++	MCD_SET_VAR(taskTable+channel, 19, (u32)xferSize);	/* var[19] */
++	MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));	/* inc[2] */
++	MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);	/* var[0] */
++	MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000);	/* var[1] */
++	MCD_SET_VAR(taskTable+channel, 3, (u32)0x00000000);	/* var[3] */
++	MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000);	/* var[4] */
++	MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000);	/* var[5] */
++	MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000);	/* var[6] */
++	MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000);	/* var[7] */
++	MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000);	/* var[8] */
++	MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000);	/* var[9] */
++	MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);	/* var[10] */
++	MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000000);	/* var[11] */
++	MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000);	/* var[12] */
++	MCD_SET_VAR(taskTable+channel, 13, (u32)0x00000000);	/* var[13] */
++	MCD_SET_VAR(taskTable+channel, 14, (u32)0x00000000);	/* var[14] */
++	MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000000);	/* var[15] */
++	MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000000);	/* var[16] */
++	MCD_SET_VAR(taskTable+channel, 17, (u32)0x00000000);	/* var[17] */
++	MCD_SET_VAR(taskTable+channel, 18, (u32)0x00000000);	/* var[18] */
++	MCD_SET_VAR(taskTable+channel, 20, (u32)0x00000000);	/* var[20] */
++	MCD_SET_VAR(taskTable+channel, 21, (u32)0x00000010);	/* var[21] */
++	MCD_SET_VAR(taskTable+channel, 22, (u32)0x00000004);	/* var[22] */
++	MCD_SET_VAR(taskTable+channel, 23, (u32)0x00000080);	/* var[23] */
++	MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);	/* inc[3] */
++	MCD_SET_VAR(taskTable+channel, 28, (u32)0x60000000);	/* inc[4] */
++	MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000001);	/* inc[5] */
++	MCD_SET_VAR(taskTable+channel, 30, (u32)0x80000000);	/* inc[6] */
++	MCD_SET_VAR(taskTable+channel, 31, (u32)0x40000000);	/* inc[7] */
++
++    /*enable the task*/
++    MCD_dmaBar->taskControl[channel] |= (u16)0x8000; /* add a MACRO HERE TBD*/
++}
++
++
++/*
++ * Task 3
++ */
++ 
++void  MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, int dmaSizeMXferSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel)
++{
++	
++	MCD_SET_VAR(taskTable+channel, 13, (u32)srcAddr);	/* var[13] */
++	MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));	/* inc[1] */
++	MCD_SET_VAR(taskTable+channel, 4, (u32)destAddr);	/* var[4] */
++	MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));	/* inc[0] */
++	MCD_SET_VAR(taskTable+channel, 6, (u32)dmaSize);	/* var[6] */
++	MCD_SET_VAR(taskTable+channel, 7, (u32)dmaSizeMXferSize);	/* var[7] */
++	MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));	/* inc[2] */
++	MCD_SET_VAR(taskTable+channel, 9, (u32)flags);	/* var[9] */
++	MCD_SET_VAR(taskTable+channel, 1, (u32)currBD);	/* var[1] */
++	MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);	/* var[0] */
++	MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000);	/* var[2] */
++	MCD_SET_VAR(taskTable+channel, 3, (u32)0x00000000);	/* var[3] */
++	MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000);	/* var[5] */
++	MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000);	/* var[8] */
++	MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);	/* var[10] */
++	MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000000);	/* var[11] */
++	MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000);	/* var[12] */
++	MCD_SET_VAR(taskTable+channel, 14, (u32)0x00000000);	/* var[14] */
++	MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000000);	/* var[15] */
++	MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000004);	/* var[16] */
++	MCD_SET_VAR(taskTable+channel, 17, (u32)0x00000080);	/* var[17] */
++	MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);	/* inc[3] */
++	MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000001);	/* inc[4] */
++	MCD_SET_VAR(taskTable+channel, 29, (u32)0x40000000);	/* inc[5] */
++
++    /*enable the task*/
++    MCD_dmaBar->taskControl[channel] |= (u16)0x8000; /* add a MACRO HERE TBD*/
++
++}
++
++
++/*
++ * Task 4
++ */
++ 
++void  MCD_startDmaENetRcv(char *bDBase, char *currBD, char *rcvFifoPtr, volatile TaskTableEntry *taskTable, int channel)
++{
++	
++	MCD_SET_VAR(taskTable+channel, 0, (u32)bDBase);	/* var[0] */
++	MCD_SET_VAR(taskTable+channel, 4, (u32)currBD);	/* var[4] */
++	MCD_SET_VAR(taskTable+channel, 7, (u32)rcvFifoPtr);	/* var[7] */
++	MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000);	/* var[1] */
++	MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000);	/* var[2] */
++	MCD_SET_VAR(taskTable+channel, 3, (u32)0x00000000);	/* var[3] */
++	MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000);	/* var[5] */
++	MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000);	/* var[6] */
++	MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000);	/* var[8] */
++	MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000);	/* var[9] */
++	MCD_SET_VAR(taskTable+channel, 10, (u32)0x0000ffff);	/* var[10] */
++	MCD_SET_VAR(taskTable+channel, 11, (u32)0x30000000);	/* var[11] */
++	MCD_SET_VAR(taskTable+channel, 12, (u32)0x0fffffff);	/* var[12] */
++	MCD_SET_VAR(taskTable+channel, 13, (u32)0x00000008);	/* var[13] */
++	MCD_SET_VAR(taskTable+channel, 24, (u32)0x00000000);	/* inc[0] */
++	MCD_SET_VAR(taskTable+channel, 25, (u32)0x60000000);	/* inc[1] */
++	MCD_SET_VAR(taskTable+channel, 26, (u32)0x20000004);	/* inc[2] */
++	MCD_SET_VAR(taskTable+channel, 27, (u32)0x40000000);	/* inc[3] */
++    /*enable the task*/
++    MCD_dmaBar->taskControl[channel] |= (u16)0x8000; /* add a MACRO HERE TBD*/
++
++}
++
++
++/*
++ * Task 5
++ */
++ 
++void  MCD_startDmaENetXmit(char *bDBase, char *currBD, char *xmitFifoPtr, volatile TaskTableEntry *taskTable, int channel)
++{
++	
++	MCD_SET_VAR(taskTable+channel, 0, (u32)bDBase);	/* var[0] */
++	MCD_SET_VAR(taskTable+channel, 3, (u32)currBD);	/* var[3] */
++	MCD_SET_VAR(taskTable+channel, 11, (u32)xmitFifoPtr);	/* var[11] */
++	MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000);	/* var[1] */
++	MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000);	/* var[2] */
++	MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000);	/* var[4] */
++	MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000);	/* var[5] */
++	MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000);	/* var[6] */
++	MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000);	/* var[7] */
++	MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000);	/* var[8] */
++	MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000);	/* var[9] */
++	MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);	/* var[10] */
++	MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000);	/* var[12] */
++	MCD_SET_VAR(taskTable+channel, 13, (u32)0x0000ffff);	/* var[13] */
++	MCD_SET_VAR(taskTable+channel, 14, (u32)0xffffffff);	/* var[14] */
++	MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000004);	/* var[15] */
++	MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000008);	/* var[16] */
++	MCD_SET_VAR(taskTable+channel, 24, (u32)0x00000000);	/* inc[0] */
++	MCD_SET_VAR(taskTable+channel, 25, (u32)0x60000000);	/* inc[1] */
++	MCD_SET_VAR(taskTable+channel, 26, (u32)0x40000000);	/* inc[2] */
++	MCD_SET_VAR(taskTable+channel, 27, (u32)0xc000fffc);	/* inc[3] */
++	MCD_SET_VAR(taskTable+channel, 28, (u32)0xe0000004);	/* inc[4] */
++	MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000000);	/* inc[5] */
++	MCD_SET_VAR(taskTable+channel, 30, (u32)0x4000ffff);	/* inc[6] */
++	MCD_SET_VAR(taskTable+channel, 31, (u32)0xe0000001);	/* inc[7] */
++
++    /*enable the task*/
++    MCD_dmaBar->taskControl[channel] |= (u16)0x8000; /* add a MACRO HERE TBD*/
++
++}
+--- /dev/null
++++ b/drivers/dma/MCD_tasksInit.h
+@@ -0,0 +1,73 @@
++/*********************************************************************
++ *
++ * Copyright (C) 2004  Motorola, Inc.
++ *  MOTOROLA, INC. All Rights Reserved.
++ *  You are hereby granted a copyright license to use
++ *  the SOFTWARE so long as this entire notice is
++ *  retained without alteration in any modified and/or redistributed
++ *  versions, and that such modified versions are clearly identified
++ *  as such. No licenses are granted by implication, estoppel or
++ *  otherwise under any patents or trademarks of Motorola, Inc. This
++ *  software is provided on an "AS IS" basis and without warranty.
++ *
++ *  To the maximum extent permitted by applicable law, MOTOROLA
++ *  DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING
++ *  IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
++ *  PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE
++ *  SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY
++ *  ACCOMPANYING WRITTEN MATERIALS.
++ *
++ *  To the maximum extent permitted by applicable law, IN NO EVENT
++ *  SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING
++ *  WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
++ *  INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY
++ *  LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
++ *
++ *  Motorola assumes no responsibility for the maintenance and support
++ *  of this software
++ ********************************************************************/
++#ifndef MCD_TSK_INIT_H
++#define MCD_TSK_INIT_H 1
++
++/*
++ * Do not edit!
++ */
++
++
++
++/*
++ * Task 0
++ */
++void  MCD_startDmaChainNoEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel);
++
++
++/*
++ * Task 1
++ */
++void  MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, int dmaSizeMXferSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel);
++
++
++/*
++ * Task 2
++ */
++void  MCD_startDmaChainEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel);
++
++
++/*
++ * Task 3
++ */
++void  MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, int dmaSizeMXferSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel);
++
++
++/*
++ * Task 4
++ */
++void  MCD_startDmaENetRcv(char *bDBase, char *currBD, char *rcvFifoPtr, volatile TaskTableEntry *taskTable, int channel);
++
++
++/*
++ * Task 5
++ */
++void  MCD_startDmaENetXmit(char *bDBase, char *currBD, char *xmitFifoPtr, volatile TaskTableEntry *taskTable, int channel);
++
++#endif  /* MCD_TSK_INIT_H */
+--- a/drivers/dma/Makefile
++++ b/drivers/dma/Makefile
+@@ -4,3 +4,5 @@ obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
+ ioatdma-objs := ioat.o ioat_dma.o ioat_dca.o
+ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
+ obj-$(CONFIG_FSL_DMA) += fsldma.o
++obj-$(CONFIG_MCD_DMA) += mcddma.o
++mcddma-objs := MCD_dmaApi.o MCD_tasks.o MCD_tasksInit.o
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -351,6 +351,8 @@ config MACB
+ 
+ source "drivers/net/arm/Kconfig"
+ 
++source "drivers/net/fec/Kconfig"
++
+ config AX88796
+ 	tristate "ASIX AX88796 NE2000 clone support"
+ 	depends on ARM || MIPS || SUPERH
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -226,6 +226,8 @@ obj-$(CONFIG_ENC28J60) += enc28j60.o
+ 
+ obj-$(CONFIG_MACB) += macb.o
+ 
++obj-$(CONFIG_FEC_548x) += fec/
++
+ obj-$(CONFIG_ARM) += arm/
+ obj-$(CONFIG_DEV_APPLETALK) += appletalk/
+ obj-$(CONFIG_TR) += tokenring/
+--- /dev/null
++++ b/drivers/net/fec/Kconfig
+@@ -0,0 +1,25 @@
++config FEC_548x
++	tristate "MCF547x/MCF548x Fast Ethernet Controller support"
++	depends on M547X_8X
++ 	help
++	  The MCF547x and MCF548x have a built-in Fast Ethernet Controller.
++	  Saying Y here will include support for this device in the kernel.
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called fecm.
++
++config FEC_548x_AUTO_NEGOTIATION
++	bool "Enable Auto-Negotiation"
++	depends on FEC_548x
++	help
++	  This option enables the FEC to automatically detect the 
++	  half/full duplex mode and the network speed at initialization
++	  If you want this, say Y.
++
++config FEC_548x_ENABLE_FEC2
++	bool "Enable the second FEC"
++	depends on FEC_548x
++	help
++	  This enables the second FEC on the 547x/548x. If you want to use
++	  it, say Y.
++
+--- /dev/null
++++ b/drivers/net/fec/Makefile
+@@ -0,0 +1,7 @@
++#
++# Makefile for the FEC ethernet driver
++#
++
++obj-$(CONFIG_FEC_548x) += fecm.o
++
++fecm-objs := fec.o ks8721.o
+--- /dev/null
++++ b/drivers/net/fec/fec.c
+@@ -0,0 +1,1375 @@
++/*
++ * Performance and stability improvements: (C) Copyright 2008,
++ *      Daniel Krueger, SYSTEC electronic GmbH
++ *
++ * Code crunched to get it to work on 2.6.24 -- FEC cleanup coming
++ * soon -- Kurt Mahan
++ *
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/ptrace.h>
++#include <linux/errno.h>
++#include <linux/ioport.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/skbuff.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/bitops.h>
++
++#include <asm/coldfire.h>
++#include <asm/mcfsim.h>
++
++#include <asm/dma.h>
++#include <asm/MCD_dma.h>
++#include <asm/m5485sram.h>
++#include <asm/virtconvert.h>
++#include <asm/irq.h>
++
++#include "fec.h"
++#include "ks8721.h"
++
++#ifdef	CONFIG_FEC_548x_ENABLE_FEC2
++#define	FEC_MAX_PORTS	2
++#define	FEC_2
++#else
++#define	FEC_MAX_PORTS	1
++#undef	FEC_2
++#endif
++
++#define VERSION "0.13"
++MODULE_DESCRIPTION( "DMA Fast Ethernet Controller driver ver " VERSION);
++
++// Private structure
++struct fec_priv {
++	struct net_device *netdev;		/* owning net device */
++	void* fecpriv_txbuf[FEC_TX_BUF_NUMBER];	//Array of transmission buffers
++	MCD_bufDescFec *fecpriv_txdesc;	// Array of transmission descriptors
++	volatile unsigned int fecpriv_current_tx;	// Inex of the transmission descriptor that is used by DMA
++	volatile unsigned int fecpriv_next_tx;	// Inex of the transmission descriptor that can be used for new data
++	unsigned int fecpriv_current_rx;	// Index of the reception descriptor that is used by DMA
++	MCD_bufDescFec *fecpriv_rxdesc;		// Array of reception descriptors
++//	unsigned char *fecpriv_rxbuf;		// Address of reception buffers
++	struct sk_buff *askb_rx[FEC_RX_BUF_NUMBER]; // Array of reception skb structure pointers
++	unsigned int fecpriv_initiator_rx;	// Reception DMA initiator
++	unsigned int fecpriv_initiator_tx;	// Transmission DMA initiator
++	int fecpriv_fec_rx_channel;	// DMA reception channel
++	int fecpriv_fec_tx_channel;	// DMA transmission channel
++	int fecpriv_rx_requestor;	// DMA reception requestor
++	int fecpriv_tx_requestor;	// DMA transmission requestor
++	void *fecpriv_interrupt_fec_rx_handler;	// DMA reception handler
++	void *fecpriv_interrupt_fec_tx_handler;	// DMA transmission handler
++	unsigned char *fecpriv_mac_addr;	// Private copy of FEC address
++	struct net_device_stats fecpriv_stat;	// Pointer to the statistical information
++	spinlock_t fecpriv_lock;
++	int fecpriv_rxflag;
++	struct tasklet_struct fecpriv_tasklet_reinit;
++	int index;
++};
++
++struct net_device *fec_dev[FEC_MAX_PORTS];
++
++// FEC functions
++int __init fec_init(void);
++struct net_device_stats *fec_get_stat(struct net_device *dev);
++
++int fec_open(struct net_device *dev);
++int fec_close(struct net_device *nd);
++int fec_tx(struct sk_buff *skb, struct net_device *dev);
++void fec_set_multicast_list(struct net_device *nd);
++int fec_set_mac_address(struct net_device *dev, void *p);
++void fec_tx_timeout(struct net_device *dev);
++void fec_interrupt_fec_tx_handler(struct net_device *dev);
++void fec_interrupt_fec_rx_handler(struct net_device *dev);
++irqreturn_t fec_interrupt_handler(int irq, void *dev_id);
++void fec_interrupt_fec_tx_handler_fec0(void);
++void fec_interrupt_fec_rx_handler_fec0(void);
++void fec_interrupt_fec_reinit(unsigned long data);
++
++unsigned char fec_mac_addr_fec0[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x50 };	// Default address of FEC0
++
++#ifdef   FEC_2
++unsigned char fec_mac_addr_fec1[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x51 };	// Default address of FEC1
++#endif
++
++#ifndef MODULE
++int fec_str_to_mac( char *str_mac, unsigned char* addr);
++int __init fec_mac_setup0 (char *s);
++#endif
++
++
++#ifdef   FEC_2
++void fec_interrupt_fec_tx_handler_fec1(void);
++void fec_interrupt_fec_rx_handler_fec1(void);
++
++#ifndef MODULE
++int __init fec_mac_setup1 (char *s);
++#endif
++
++#endif
++int fec_read_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int *data);
++int fec_write_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int data);
++
++module_init(fec_init);
++/* module_exit(fec_cleanup); */
++__setup("mac0=", fec_mac_setup0);
++
++#ifdef   FEC_2
++__setup("mac1=", fec_mac_setup1);
++#endif
++
++/*
++ * Initialize a FEC device
++ */
++int fec_enet_init(struct net_device *dev)
++{
++	static int index = 0;
++	struct fec_priv *fp = netdev_priv(dev);
++	int i;
++
++	fp->index = index;
++	fp->netdev = dev;
++	fec_dev[ index ] = dev;
++printk(KERN_INFO "FEI: index=%d\n", index);
++
++	if (index == 0) {
++		/* disable fec0 */
++		FEC_ECR(FEC_BASE_ADDR_FEC0) = FEC_ECR_DISABLE;
++
++		/* setup the interrupt handler */
++		dev->irq = 64 + ISC_FEC0;
++
++		if (request_irq(dev->irq, fec_interrupt_handler,
++		                IRQF_DISABLED, "ColdFire FEC 0", dev)) {
++			dev->irq = 0;
++			printk("Cannot allocate FEC0 IRQ\n");
++		} else {
++			/* interrupt priority and level */
++			MCF_ICR(ISC_FEC0) = ILP_FEC0;
++		}
++
++		/* fec base address */
++		dev->base_addr = FEC_BASE_ADDR_FEC0;
++
++		/* requestor numbers */
++		fp->fecpriv_rx_requestor = DMA_FEC0_RX;
++		fp->fecpriv_tx_requestor = DMA_FEC0_TX;
++
++		/* fec0 handlers */
++		fp->fecpriv_interrupt_fec_rx_handler = fec_interrupt_fec_rx_handler_fec0;
++		fp->fecpriv_interrupt_fec_tx_handler = fec_interrupt_fec_tx_handler_fec0;
++
++		/* tx descriptors */
++		fp->fecpriv_txdesc = (void*)FEC_TX_DESC_FEC0;
++
++		/* rx descriptors */
++		fp->fecpriv_rxdesc = (void*)FEC_RX_DESC_FEC0;
++
++printk(KERN_INFO "FEI: txdesc=0x%p  rxdesc=0x%p\n", fp->fecpriv_txdesc, fp->fecpriv_rxdesc);
++
++		/* mac addr */
++		fp->fecpriv_mac_addr = fec_mac_addr_fec0;
++	}
++	else {
++		/* disable fec1 */
++		FEC_ECR(FEC_BASE_ADDR_FEC1) = FEC_ECR_DISABLE;
++#ifdef FEC_2
++		/* setup the interrupt handler */
++		dev->irq = 64 + ISC_FEC1;
++
++		if (request_irq(dev->irq, fec_interrupt_handler,
++		                IRQF_DISABLED, "ColdFire FEC 1", dev)) {
++			dev->irq = 0;
++			printk("Cannot allocate FEC1 IRQ\n");
++		} else {
++			/* interrupt priority and level */
++			MCF_ICR(ISC_FEC1) = ILP_FEC1;
++		}
++
++		/* fec base address */
++		dev->base_addr = FEC_BASE_ADDR_FEC1;
++
++		/* requestor numbers */
++		fp->fecpriv_rx_requestor = DMA_FEC1_RX;
++		fp->fecpriv_tx_requestor = DMA_FEC1_TX;
++
++		/* fec1 handlers */
++		fp->fecpriv_interrupt_fec_rx_handler = fec_interrupt_fec_rx_handler_fec1;
++		fp->fecpriv_interrupt_fec_tx_handler = fec_interrupt_fec_tx_handler_fec1;
++
++		/* tx descriptors */
++		fp->fecpriv_txdesc = (void*)FEC_TX_DESC_FEC1;
++
++		/* rx descriptors */
++		fp->fecpriv_rxdesc = (void*)FEC_RX_DESC_FEC1;
++
++		/* mac addr */
++		fp->fecpriv_mac_addr = fec_mac_addr_fec1;
++#endif
++	}
++
++printk(KERN_INFO "FEI: index=%d base_addr=0x%lx\n", index, dev->base_addr);
++
++	/* clear MIB */
++	memset((void *) (dev->base_addr + 0x200), 0, FEC_MIB_LEN);
++
++	/* clear the statistics structure */
++	memset((void *) &(fp->fecpriv_stat), 0,
++	       sizeof(struct net_device_stats));
++
++	/* grab the FEC initiators */
++	dma_set_initiator(fp->fecpriv_tx_requestor);
++	fp->fecpriv_initiator_tx = dma_get_initiator(fp->fecpriv_tx_requestor);
++	dma_set_initiator(fp->fecpriv_rx_requestor);
++	fp->fecpriv_initiator_rx = dma_get_initiator(fp->fecpriv_rx_requestor);
++
++	/* reset the DMA channels */
++	fp->fecpriv_fec_rx_channel = -1;
++	fp->fecpriv_fec_tx_channel = -1;
++
++	for (i = 0; i < FEC_RX_BUF_NUMBER; i++)
++		fp->askb_rx[i] = NULL;
++
++	/* initialize the pointers to the socket buffers */
++	for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
++		fp->fecpriv_txbuf[i] = NULL;
++
++	ether_setup(dev);
++
++	dev->open = fec_open;
++	dev->stop = fec_close;
++	dev->hard_start_xmit = fec_tx;
++	dev->get_stats = fec_get_stat;
++	dev->set_multicast_list = fec_set_multicast_list;
++	dev->set_mac_address = fec_set_mac_address;
++	dev->tx_timeout = fec_tx_timeout;
++	dev->watchdog_timeo = FEC_TX_TIMEOUT * HZ;
++
++	memcpy(dev->dev_addr, fp->fecpriv_mac_addr, ETH_ALEN);
++
++	spin_lock_init(&fp->fecpriv_lock);
++
++	// Initialize FEC/I2C/IRQ Pin Assignment Register
++	FEC_GPIO_PAR_FECI2CIRQ &= 0xF;
++	FEC_GPIO_PAR_FECI2CIRQ |= FEC_FECI2CIRQ;
++
++	index++;
++	return 0;
++}
++
++/*
++ * Module Initialization
++ */
++int __init fec_init(void)
++{
++	struct net_device *dev;
++	int i;
++	int err;
++	DECLARE_MAC_BUF(mac);
++
++	printk(KERN_INFO "FEC ENET (DMA) Version .00\n");
++
++
++	for (i = 0; i < FEC_MAX_PORTS; i++) {
++		dev = alloc_etherdev(sizeof(struct fec_priv));
++		if (!dev)
++			return -ENOMEM;
++		err = fec_enet_init(dev);
++		if (err) {
++			free_netdev(dev);
++			continue;
++		}
++		if (register_netdev(dev) != 0) {
++			free_netdev(dev);
++			return -EIO;
++		}
++
++		printk(KERN_INFO "%s: ethernet %s\n",
++		       dev->name, print_mac(mac, dev->dev_addr));
++	}
++	return 0;
++}
++
++/*
++ * Stop a device
++ */
++void fec_stop(struct net_device *dev)
++{
++	struct fec_priv *fp = netdev_priv(dev);
++
++	dma_remove_initiator(fp->fecpriv_initiator_tx);
++	dma_remove_initiator(fp->fecpriv_initiator_rx);
++
++	if (dev->irq)
++		free_irq(dev->irq, dev);
++}
++
++/************************************************************************
++* NAME: fec_open
++*
++* DESCRIPTION: This function performs the initialization of
++*				of FEC and corresponding KS8721 transiver
++*
++* RETURNS: If no error occurs, this function returns zero.
++*************************************************************************/
++
++int fec_open(struct net_device *dev)
++{
++	struct fec_priv *fp = netdev_priv(dev);
++	unsigned long base_addr = (unsigned long) dev->base_addr;
++	int fduplex;
++	int i;
++	int channel;
++	int error_code = -EBUSY;
++
++printk(KERN_INFO "FECOPEN: index=%d\n", fp->index);
++
++	//Receive the DMA channels
++	channel = dma_set_channel_fec(fp->fecpriv_rx_requestor);
++
++	if (channel == -1)
++	{
++		printk("Dma channel cannot be reserved\n");
++		goto ERRORS;
++	}
++
++	fp->fecpriv_fec_rx_channel = channel;
++
++	dma_connect(channel, (int) fp->fecpriv_interrupt_fec_rx_handler);
++
++	channel = dma_set_channel_fec(fp->fecpriv_tx_requestor);
++
++	if (channel == -1)
++	{
++		printk("Dma channel cannot be reserved\n");
++		goto ERRORS;
++	}
++printk(KERN_INFO "FECOPEN2\n");
++
++	fp->fecpriv_fec_tx_channel = channel;
++
++	dma_connect(channel, (int) fp->fecpriv_interrupt_fec_tx_handler);
++
++	// init tasklet for controller reinitialization
++	tasklet_init(&fp->fecpriv_tasklet_reinit, fec_interrupt_fec_reinit, (unsigned long) dev);
++printk(KERN_INFO "FECOPEN3\n");
++
++	// Reset FIFOs
++	FEC_FECFRST(base_addr) |= FEC_SW_RST | FEC_RST_CTL;
++	FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
++
++	// Reset and disable FEC
++	FEC_ECR(base_addr) = FEC_ECR_RESET;
++
++	// Wait
++	udelay(10);
++
++	// Clear all events
++	FEC_EIR(base_addr) = FEC_EIR_CLEAR;
++
++	// Reset FIFO status
++	FEC_FECTFSR(base_addr) = FEC_FECTFSR_MSK;
++	FEC_FECRFSR(base_addr) = FEC_FECRFSR_MSK;
++
++#if 0
++/* JKM -- move into HW init */
++	// Copy the default address to the device structure
++	memcpy(dev->dev_addr, fp->fecpriv_mac_addr, ETH_ALEN);
++#endif
++
++	// Set the default address
++	FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) | (fp->fecpriv_mac_addr[1] << 16) | (fp->fecpriv_mac_addr[2] << 8) | fp->fecpriv_mac_addr[3];
++	FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) | (fp->fecpriv_mac_addr[5] << 16) | 0x8808;
++
++	// Reset the group address descriptor
++	FEC_GALR(base_addr) = 0x00000000;
++	FEC_GAUR(base_addr) = 0x00000000;
++
++	// Reset the individual address descriptor
++	FEC_IALR(base_addr) = 0x00000000;
++	FEC_IAUR(base_addr) = 0x00000000;
++
++	// Set the receive control register
++	FEC_RCR(base_addr) = FEC_RCR_MAX_FRM_SIZE | FEC_RCR_MII;
++
++	// Set the receive FIFO control register
++//	FEC_FECRFCR(base_addr) = FEC_FECRFCR_FRM | FEC_FECRFCR_GR | FEC_FECRFCR_MSK;
++	FEC_FECRFCR(base_addr) = FEC_FECRFCR_FRM | FEC_FECRFCR_GR
++                             | (FEC_FECRFCR_MSK     // disable all but ...
++                                & ~FEC_FECRFCR_FAE  // enable frame accept error
++                                & ~FEC_FECRFCR_RXW  // enable receive wait condition
++//                                & ~FEC_FECRFCR_UF   // enable FIFO underflow
++                             );
++
++	//Set the receive FIFO alarm register
++	FEC_FECRFAR(base_addr) = FEC_FECRFAR_ALARM;
++
++	// Set the transmit FIFO control register
++//	FEC_FECTFCR(base_addr) = FEC_FECTFCR_FRM | FEC_FECTFCR_GR | FEC_FECTFCR_MSK;
++	FEC_FECTFCR(base_addr) = FEC_FECTFCR_FRM | FEC_FECTFCR_GR
++                             | (FEC_FECTFCR_MSK     // disable all but ...
++                                & ~FEC_FECTFCR_FAE  // enable frame accept error
++//                                & ~FEC_FECTFCR_TXW  // enable transmit wait condition
++//                                & ~FEC_FECTFCR_UF   // enable FIFO underflow
++                                & ~FEC_FECTFCR_OF); // enable FIFO overflow
++
++	//Set the transmit FIFO alarm register
++	FEC_FECTFAR(base_addr) = FEC_FECTFAR_ALARM;
++
++	// Set the Tx FIFO watermark
++	FEC_FECTFWR(base_addr) = FEC_FECTFWR_XWMRK;
++
++	// Enable the transmitter to append the CRC
++	FEC_CTCWR(base_addr) = FEC_CTCWR_TFCW_CRC;
++
++	// Enable the ethernet interrupts
++//	FEC_EIMR(base_addr) = FEC_EIMR_MASK;
++	FEC_EIMR(base_addr) = FEC_EIMR_DISABLE
++                            | FEC_EIR_LC
++                            | FEC_EIR_RL
++                            | FEC_EIR_HBERR
++                            | FEC_EIR_XFUN
++                            | FEC_EIR_XFERR
++                            | FEC_EIR_RFERR
++                            ;
++printk(KERN_INFO "FECOPEN4\n");
++
++#ifdef   CONFIG_FEC_548x_AUTO_NEGOTIATION
++	if ((error_code = init_transceiver(base_addr, &fduplex)) != 0)
++	{
++		printk("Initialization of the transceiver is failed\n");
++		goto ERRORS;
++	}
++#else
++	fduplex = 1;
++#endif
++printk(KERN_INFO "FECOPEN5\n");
++
++	if (fduplex)
++		// Enable the full duplex mode
++		FEC_TCR(base_addr) = FEC_TCR_FDEN | FEC_TCR_HBC;
++	else
++		// Disable reception of frames while transmitting
++		FEC_RCR(base_addr) |= FEC_RCR_DRT;
++
++	// Enable MIB
++	FEC_MIBC(base_addr) = FEC_MIBC_ENABLE;
++
++	// Enable FEC
++	FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
++
++	// Initialize transmission descriptors and start DMA for the transmission
++	for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
++		fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT;
++printk(KERN_INFO "FECOPEN6\n");
++
++	fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
++
++	fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0;
++
++	MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0,
++		     (unsigned char *) &(FEC_FECTFDR(base_addr)), 0,
++		     FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx,
++		     FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT,
++		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
++
++	// Initialize reception descriptors and start DMA for the reception
++	for (i = 0; i < FEC_RX_BUF_NUMBER; i++)
++	{
++		fp->askb_rx[i] = alloc_skb(FEC_MAXBUF_SIZE + 16, GFP_DMA);
++		if (!fp->askb_rx[i])
++		{
++    		fp->fecpriv_rxdesc[i].dataPointer = 0;
++    		fp->fecpriv_rxdesc[i].statCtrl = 0;
++	    	fp->fecpriv_rxdesc[i].length = 0;
++		}
++		else
++		{
++		    skb_reserve(fp->askb_rx[i], 16);
++			fp->askb_rx[i]->dev = dev;
++    		fp->fecpriv_rxdesc[i].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[i]->tail);
++    		fp->fecpriv_rxdesc[i].statCtrl = MCD_FEC_BUF_READY | MCD_FEC_INTERRUPT;
++	    	fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE;
++	    }
++	}
++printk(KERN_INFO "FECOPEN7\n");
++
++	fp->fecpriv_rxdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
++	fp->fecpriv_current_rx = 0;
++
++	// flush entire data cache before restarting the DMA
++#if 0
++/* JKM -- currently running with cache turned off */
++	DcacheFlushInvalidate();
++#endif
++	
++	MCD_startDma(fp->fecpriv_fec_rx_channel, (char *) fp->fecpriv_rxdesc, 0,
++		     (unsigned char *) &(FEC_FECRFDR(base_addr)), 0,
++		     FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_rx,
++		     FEC_RX_DMA_PRI, MCD_FECRX_DMA | MCD_INTERRUPT,
++		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
++
++	netif_start_queue(dev);
++
++//	MOD_INC_USE_COUNT;
++printk(KERN_INFO "FECOPEN: finished\n");
++
++	return 0;
++
++ERRORS:
++
++	// Remove the channels and return with the error code
++	if (fp->fecpriv_fec_rx_channel != -1)
++	{
++		dma_disconnect(fp->fecpriv_fec_rx_channel);
++		dma_remove_channel_by_number(fp->fecpriv_fec_rx_channel);
++		fp->fecpriv_fec_rx_channel = -1;
++	}
++
++	if (fp->fecpriv_fec_tx_channel != -1)
++	{
++		dma_disconnect(fp->fecpriv_fec_tx_channel);
++		dma_remove_channel_by_number(fp->fecpriv_fec_tx_channel);
++		fp->fecpriv_fec_tx_channel = -1;
++	}
++
++	return error_code;
++
++}
++
++/************************************************************************
++* NAME: fec_close
++*
++* DESCRIPTION: This function performs the graceful stop of the
++*				transmission and disables FEC
++*
++* RETURNS: This function always returns zero.
++*************************************************************************/
++int fec_close(struct net_device *dev)
++{
++	//Receive the pointer to the private structure
++	struct fec_priv *fp = netdev_priv(dev);
++
++	// Receive the base address
++	unsigned long base_addr = (unsigned long) dev->base_addr;
++
++	unsigned long time;
++
++	int i;
++
++	netif_stop_queue(dev);
++
++	// Perform the graceful stop
++	FEC_TCR(base_addr) |= FEC_TCR_GTS;
++
++	time = jiffies;
++
++	// Wait for the graceful stop
++	while (!(FEC_EIR(base_addr) & FEC_EIR_GRA) && jiffies - time < FEC_GR_TIMEOUT * HZ)
++		schedule();
++
++	// Disable FEC
++	FEC_ECR(base_addr) = FEC_ECR_DISABLE;
++
++	// Reset the DMA channels
++	spin_lock_irq(&fp->fecpriv_lock);
++	MCD_killDma(fp->fecpriv_fec_tx_channel);
++	spin_unlock_irq(&fp->fecpriv_lock);
++	dma_remove_channel_by_number(fp->fecpriv_fec_tx_channel);
++	dma_disconnect(fp->fecpriv_fec_tx_channel);
++	fp->fecpriv_fec_tx_channel = -1;
++
++	for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
++		if (fp->fecpriv_txbuf[i])
++		{
++			kfree(fp->fecpriv_txbuf[i]);
++			fp->fecpriv_txbuf[i] = NULL;
++		}
++
++	spin_lock_irq(&fp->fecpriv_lock);
++	MCD_killDma(fp->fecpriv_fec_rx_channel);
++	spin_unlock_irq(&fp->fecpriv_lock);
++
++	dma_remove_channel_by_number(fp->fecpriv_fec_rx_channel);
++	dma_disconnect(fp->fecpriv_fec_rx_channel);
++	fp->fecpriv_fec_rx_channel = -1;
++
++	for (i = 0; i < FEC_RX_BUF_NUMBER; i++)
++	{
++		if (fp->askb_rx[i])
++		{
++		    kfree_skb(fp->askb_rx[i]);
++		    fp->askb_rx[i] = NULL;
++	    }
++	}
++//	MOD_DEC_USE_COUNT;
++
++	return 0;
++}
++
++/************************************************************************
++* +NAME: fec_get_stat
++*
++* RETURNS: This function returns the statistical information.
++*************************************************************************/
++struct net_device_stats * fec_get_stat(struct net_device *dev)
++{
++
++	//Receive the pointer to the private structure
++	struct fec_priv *fp = netdev_priv(dev);
++
++	// Receive the base address
++	unsigned long base_addr = dev->base_addr;
++
++	// Receive the statistical information
++	fp->fecpriv_stat.rx_packets = FECSTAT_RMON_R_PACKETS(base_addr);
++	fp->fecpriv_stat.tx_packets = FECSTAT_RMON_T_PACKETS(base_addr);
++	fp->fecpriv_stat.rx_bytes = FECSTAT_RMON_R_OCTETS(base_addr);
++	fp->fecpriv_stat.tx_bytes = FECSTAT_RMON_T_OCTETS(base_addr);
++
++	fp->fecpriv_stat.multicast = FECSTAT_RMON_R_MC_PKT(base_addr);
++	fp->fecpriv_stat.collisions = FECSTAT_RMON_T_COL(base_addr);
++
++	fp->fecpriv_stat.rx_length_errors = FECSTAT_RMON_R_UNDERSIZE(base_addr) + FECSTAT_RMON_R_OVERSIZE(base_addr) + FECSTAT_RMON_R_FRAG(base_addr) + FECSTAT_RMON_R_JAB(base_addr);
++	fp->fecpriv_stat.rx_crc_errors = FECSTAT_IEEE_R_CRC(base_addr);
++	fp->fecpriv_stat.rx_frame_errors = FECSTAT_IEEE_R_ALIGN(base_addr);
++	fp->fecpriv_stat.rx_over_errors = FECSTAT_IEEE_R_MACERR(base_addr);
++
++	fp->fecpriv_stat.tx_carrier_errors = FECSTAT_IEEE_T_CSERR(base_addr);
++	fp->fecpriv_stat.tx_fifo_errors = FECSTAT_IEEE_T_MACERR(base_addr);
++	fp->fecpriv_stat.tx_window_errors = FECSTAT_IEEE_T_LCOL(base_addr);
++
++	// I hope that one frame doesn't have more than one error
++	fp->fecpriv_stat.rx_errors = fp->fecpriv_stat.rx_length_errors + fp->fecpriv_stat.rx_crc_errors + fp->fecpriv_stat.rx_frame_errors + fp->fecpriv_stat.rx_over_errors + fp->fecpriv_stat.rx_dropped;
++	fp->fecpriv_stat.tx_errors = fp->fecpriv_stat.tx_carrier_errors + fp->fecpriv_stat.tx_fifo_errors + fp->fecpriv_stat.tx_window_errors + fp->fecpriv_stat.tx_aborted_errors + fp->fecpriv_stat.tx_heartbeat_errors + fp->fecpriv_stat.tx_dropped;
++
++	return &fp->fecpriv_stat;
++}
++
++/************************************************************************
++* NAME: fec_set_multicast_list
++*
++* DESCRIPTION: This function sets the frame filtering parameters
++*************************************************************************/
++void fec_set_multicast_list(struct net_device *dev)
++{
++	// Pointer to the address list
++	struct dev_mc_list *dmi;
++
++	unsigned int crc, data;
++	int i, j, k;
++
++	// Receive the base address
++	unsigned long base_addr = (unsigned long) dev->base_addr;
++
++	if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI)
++	{
++		// Allow all incoming frames
++		FEC_GALR(base_addr) = 0xFFFFFFFF;
++		FEC_GAUR(base_addr) = 0xFFFFFFFF;
++		return;
++	}
++	// Reset the group address register
++	FEC_GALR(base_addr) = 0x00000000;
++	FEC_GAUR(base_addr) = 0x00000000;
++
++	// Process all addresses
++	for (i = 0, dmi = dev->mc_list; i < dev->mc_count; i++, dmi = dmi->next)
++	{
++		// Processing must be only for the group addresses
++		if (!(dmi->dmi_addr[0] & 1))
++			continue;
++
++		// Calculate crc value for the current address
++		crc = 0xFFFFFFFF;
++		for (j = 0; j < dmi->dmi_addrlen; j++)
++		{
++
++			for (k = 0, data = dmi->dmi_addr[j]; k < 8;  k++, data >>= 1)
++			{
++				if ((crc ^ data) & 1)
++					crc = (crc >> 1) ^ FEC_CRCPOL;
++				else
++					crc >>= 1;
++
++			}
++
++		}
++
++		// Add this value
++		crc >>= 26;
++		crc &= 0x3F;
++		if (crc > 31)
++			FEC_GAUR(base_addr) |= 0x1 << (crc - 32);
++		else
++			FEC_GALR(base_addr) |= 0x1 << crc;
++
++	}
++
++}
++
++/************************************************************************
++* NAME: fec_set_mac_address
++*
++* DESCRIPTION: This function sets the MAC address
++*************************************************************************/
++int fec_set_mac_address(struct net_device *dev, void *p)
++{
++	//Receive the pointer to the private structure
++	struct fec_priv *fp = netdev_priv(dev);
++
++	// Receive the base address
++	unsigned long base_addr = (unsigned long) dev->base_addr;
++
++	struct sockaddr *addr = p;
++
++	if (netif_running(dev))
++		return -EBUSY;
++
++	// Copy a new address to the device structure
++	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
++
++	// Copy a new address to the private structure
++	memcpy(fp->fecpriv_mac_addr, addr->sa_data, 6);
++
++	// Set the address to the registers
++	FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) | (fp->fecpriv_mac_addr[1] << 16) | (fp->fecpriv_mac_addr[2] << 8) | fp->fecpriv_mac_addr[3];
++	FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) | (fp->fecpriv_mac_addr[5] << 16) | 0x8808;
++
++	return 0;
++}
++
++/************************************************************************
++* NAME: fec_tx
++*
++* DESCRIPTION: This function starts transmission of the frame using DMA
++*
++* RETURNS: This function always returns zero.
++*************************************************************************/
++int fec_tx(struct sk_buff *skb, struct net_device *dev)
++{
++
++	//Receive the pointer to the private structure
++	struct fec_priv *fp = netdev_priv(dev);
++
++	void *data, *data_aligned;
++	int offset;
++
++printk(KERN_INFO "fec_tx\n");
++	data = kmalloc(skb->len + 15, GFP_DMA | GFP_ATOMIC);
++
++	if (!data)
++	{
++		fp->fecpriv_stat.tx_dropped++;
++		dev_kfree_skb(skb);
++		return 0;
++	}
++
++	offset = (((unsigned long)virt_to_phys(data) + 15) & 0xFFFFFFF0) - (unsigned long)virt_to_phys(data);
++	data_aligned = (void*)((unsigned long)data + offset);
++	memcpy(data_aligned, skb->data, skb->len);
++
++	// flush data cache before initializing the descriptor and starting DMA
++#if 0
++/* JKM -- currently running with cache turned off */
++	DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(data_aligned), skb->len);
++#endif
++
++	spin_lock_irq(&fp->fecpriv_lock);
++
++	// Initialize the descriptor
++	fp->fecpriv_txbuf[fp->fecpriv_next_tx] = data;
++	fp->fecpriv_txdesc[fp->fecpriv_next_tx].dataPointer = (unsigned int) virt_to_phys(data_aligned);
++	fp->fecpriv_txdesc[fp->fecpriv_next_tx].length = skb->len;
++	fp->fecpriv_txdesc[fp->fecpriv_next_tx].statCtrl |= (MCD_FEC_END_FRAME | MCD_FEC_BUF_READY);
++	fp->fecpriv_next_tx = (fp->fecpriv_next_tx + 1) & FEC_TX_INDEX_MASK;
++
++	if (fp->fecpriv_txbuf[fp->fecpriv_current_tx] && fp->fecpriv_current_tx == fp->fecpriv_next_tx)
++		netif_stop_queue(dev);
++
++	spin_unlock_irq(&fp->fecpriv_lock);
++
++	// Tell the DMA to continue the transmission
++	MCD_continDma(fp->fecpriv_fec_tx_channel);
++
++	dev_kfree_skb(skb);
++
++	dev->trans_start = jiffies;
++
++	return 0;
++}
++
++/************************************************************************
++* NAME: fec_tx_timeout
++*
++* DESCRIPTION: If the interrupt processing of received frames was lost
++*              and DMA stopped the reception, this function clears
++*              the transmission descriptors and starts DMA
++*
++*************************************************************************/
++void fec_tx_timeout(struct net_device *dev)
++{
++	int i;
++	struct fec_priv *fp = netdev_priv(dev);
++	unsigned long base_addr = (unsigned long) dev->base_addr;
++
++printk(KERN_INFO "fec_tx_timeout\n");
++	spin_lock_irq(&fp->fecpriv_lock);
++	MCD_killDma(fp->fecpriv_fec_tx_channel);
++	for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
++	{
++		if (fp->fecpriv_txbuf[i])
++		{
++
++			kfree(fp->fecpriv_txbuf[i]);
++			fp->fecpriv_txbuf[i] = NULL;
++
++		}
++		fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT;
++	}
++	fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
++
++	fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0;
++
++    // Reset FIFOs
++    FEC_FECFRST(base_addr) |= FEC_SW_RST;
++    FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
++
++	// Reset and disable FEC
++//	FEC_ECR(base_addr) = FEC_ECR_RESET;
++
++	// Enable FEC
++	FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
++
++	MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0,
++		     (unsigned char *) &(FEC_FECTFDR(base_addr)), 0,
++		     FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx,
++		     FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT,
++		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
++
++	spin_unlock_irq(&fp->fecpriv_lock);
++
++	netif_wake_queue(dev);
++
++}
++
++/************************************************************************
++* NAME: fec_read_mii
++*
++* DESCRIPTION: This function reads the value from the MII register
++*
++* RETURNS: If no error occurs, this function returns zero.
++*************************************************************************/
++int fec_read_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int *data)
++{
++	unsigned long time;
++
++	// Clear the MII interrupt bit
++	FEC_EIR(base_addr) = FEC_EIR_MII;
++
++	// Write to the MII management frame register
++	FEC_MMFR(base_addr) = FEC_MMFR_READ | (pa << 23) | (ra << 18);
++
++	time = jiffies;
++
++	// Wait for the reading
++	while (!(FEC_EIR(base_addr) & FEC_EIR_MII))
++	{
++		if (jiffies - time > FEC_MII_TIMEOUT * HZ)
++			return -ETIME;
++		schedule();
++	}
++
++	// Clear the MII interrupt bit
++	FEC_EIR(base_addr) = FEC_EIR_MII;
++
++	*data = FEC_MMFR(base_addr) & 0x0000FFFF;
++
++	return 0;
++}
++
++/************************************************************************
++* NAME: fec_write_mii
++*
++* DESCRIPTION: This function writes the value to the MII register
++*
++* RETURNS: If no error occurs, this function returns zero.
++*************************************************************************/
++int fec_write_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int data)
++{
++	unsigned long time;
++
++	// Clear the MII interrupt bit
++	FEC_EIR(base_addr) = FEC_EIR_MII;
++
++	// Write to the MII management frame register
++	FEC_MMFR(base_addr) = FEC_MMFR_WRITE | (pa << 23) | (ra << 18) | data;
++
++	time = jiffies;
++
++	// Wait for the writing
++
++	while (!(FEC_EIR(base_addr) & FEC_EIR_MII))
++	{
++		if (jiffies - time > FEC_MII_TIMEOUT * HZ)
++			return -ETIME;
++
++		schedule();
++	}
++
++	// Clear the MII interrupt bit
++	FEC_EIR(base_addr) = FEC_EIR_MII;
++
++	return 0;
++}
++
++/************************************************************************
++* NAME: fec_interrupt_tx_handler
++*
++* DESCRIPTION: This function is called when the data
++*              transmission from the buffer to the FEC is completed.
++*
++*************************************************************************/
++void fec_interrupt_fec_tx_handler(struct net_device *dev)
++{
++	struct fec_priv *fp = netdev_priv(dev);
++
++printk(KERN_INFO "fectxint\n");
++	//Release the socket buffer
++	if(fp->fecpriv_txbuf[fp->fecpriv_current_tx])
++	{
++		kfree(fp->fecpriv_txbuf[fp->fecpriv_current_tx]);
++		fp->fecpriv_txbuf[fp->fecpriv_current_tx] = NULL;
++	}
++	fp->fecpriv_current_tx = (fp->fecpriv_current_tx + 1) & FEC_TX_INDEX_MASK;
++
++	if (MCD_dmaStatus(fp->fecpriv_fec_tx_channel) == MCD_DONE)
++		for (; fp->fecpriv_current_tx != fp->fecpriv_next_tx; fp->fecpriv_current_tx = (fp->fecpriv_current_tx + 1) & FEC_TX_INDEX_MASK)
++		{
++			if(fp->fecpriv_txbuf[fp->fecpriv_current_tx])
++			{
++				kfree(fp->fecpriv_txbuf[fp->fecpriv_current_tx]);
++				fp->fecpriv_txbuf[fp->fecpriv_current_tx] = NULL;
++			}
++		}
++
++	if (netif_queue_stopped(dev))
++		netif_wake_queue(dev);
++
++}
++
++/************************************************************************
++* NAME: fec_interrupt_rx_handler
++*
++* DESCRIPTION: This function is called when the data
++*              reception from the FEC to the reception buffer is completed.
++*
++*************************************************************************/
++void fec_interrupt_fec_rx_handler(struct net_device *dev)
++{
++	struct fec_priv *fp = netdev_priv(dev);
++	struct sk_buff *skb;
++
++printk(KERN_INFO "fecrxint\n");
++	fp->fecpriv_rxflag = 1;
++/*
++	// Some buffers can be missed
++	if(!(fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME))
++	{
++		// Find a valid index
++		for(i = 0; i < FEC_RX_BUF_NUMBER && !(fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME); i++, fp->fecpriv_current_rx = (fp->fecpriv_current_rx + 1) & FEC_RX_INDEX_MASK);
++
++		if(i == FEC_RX_BUF_NUMBER)
++		{
++			// There are no data to process
++			// Tell the DMA to continue the reception
++			MCD_continDma(fp->fecpriv_fec_rx_channel);
++
++			fp->fecpriv_rxflag = 0;
++
++			return;
++		}
++	}
++*/
++	for (; fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME;	fp->fecpriv_current_rx = (fp->fecpriv_current_rx + 1) & FEC_RX_INDEX_MASK)
++	{
++	    if( (fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length <= FEC_MAXBUF_SIZE) &&
++		    (fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length > 4)) // --tym--
++	    {
++    		skb = fp->askb_rx[fp->fecpriv_current_rx];
++    		if (!skb)
++    		{
++    		    fp->fecpriv_stat.rx_dropped++;
++            }
++    		else
++    		{
++    		    // flush data cache before initializing the descriptor and starting DMA
++//		    DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), fp->askb_rx[fp->fecpriv_current_rx]->len);
++
++    			skb_put(skb, fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length - 4);
++//    			skb->dev = dev;
++    			skb->protocol = eth_type_trans(skb, dev);
++    			netif_rx(skb);
++    		}
++		    fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl &= ~MCD_FEC_END_FRAME;
++    		// allocate new skbuff
++    		fp->askb_rx[fp->fecpriv_current_rx] = alloc_skb(FEC_MAXBUF_SIZE + 16, /*GFP_ATOMIC |*/ GFP_DMA);
++		    if (!fp->askb_rx[fp->fecpriv_current_rx])
++    	    {
++        		fp->fecpriv_rxdesc[fp->fecpriv_current_rx].dataPointer = 0;
++	    	    fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length = 0;
++    		    fp->fecpriv_stat.rx_dropped++;
++		    }
++    		else
++    		{
++    		    skb_reserve(fp->askb_rx[fp->fecpriv_current_rx], 16);
++    			fp->askb_rx[fp->fecpriv_current_rx]->dev = dev;
++
++    		    // flush data cache before initializing the descriptor and starting DMA
++#if 0
++/* JKM -- currently running with cache turned off */
++		    DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), FEC_MAXBUF_SIZE);
++#endif
++
++    	    	fp->fecpriv_rxdesc[fp->fecpriv_current_rx].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail);
++    	    	fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length = FEC_MAXBUF_SIZE;
++        		fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl |= MCD_FEC_BUF_READY;
++
++    		    // flush data cache before initializing the descriptor and starting DMA
++//		    DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), FEC_MAXBUF_SIZE);
++    	    }
++        }
++
++	}
++
++	// Tell the DMA to continue the reception
++	MCD_continDma(fp->fecpriv_fec_rx_channel);
++
++	fp->fecpriv_rxflag = 0;
++
++}
++
++/************************************************************************
++* NAME: fec_interrupt_handler
++*
++* DESCRIPTION: This function is called when some special errors occur
++*
++*************************************************************************/
++irqreturn_t fec_interrupt_handler(int irq, void *dev_id)
++{
++
++	struct net_device *dev = (struct net_device *)dev_id;
++	struct fec_priv *fp = netdev_priv(dev);
++	unsigned long base_addr = (unsigned long) dev->base_addr;
++	unsigned long events;
++
++printk(KERN_INFO "fecerrint\n");
++	// Read and clear the events
++	events = FEC_EIR(base_addr) & FEC_EIMR(base_addr);
++
++	if (events & FEC_EIR_HBERR)
++	{
++		fp->fecpriv_stat.tx_heartbeat_errors++;
++    	FEC_EIR(base_addr) = FEC_EIR_HBERR;
++	}
++
++    // receive/transmit FIFO error
++    if (((events & FEC_EIR_RFERR) != 0) || ((events & FEC_EIR_XFERR) != 0))
++    {
++        // kill DMA receive channel
++        MCD_killDma (fp->fecpriv_fec_rx_channel);
++        // kill running transmission by DMA
++        MCD_killDma (fp->fecpriv_fec_tx_channel);
++
++        // Reset FIFOs
++        FEC_FECFRST(base_addr) |= FEC_SW_RST;
++        FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
++
++        // reset receive FIFO status register
++        FEC_FECRFSR(base_addr) = FEC_FECRFSR_FAE
++                                 | FEC_FECRFSR_RXW
++                                 | FEC_FECRFSR_UF;
++
++        // reset transmit FIFO status register
++        FEC_FECTFSR(base_addr) = FEC_FECTFSR_FAE
++                                 | FEC_FECTFSR_TXW
++                                 | FEC_FECTFSR_UF
++                                 | FEC_FECTFSR_OF;
++
++        // reset RFERR and XFERR event
++        FEC_EIR(base_addr) = FEC_EIR_RFERR | FEC_EIR_XFERR;
++
++	// stop queue
++	netif_stop_queue(dev);
++	
++        // execute reinitialization as tasklet
++    	tasklet_schedule(&fp->fecpriv_tasklet_reinit);
++
++        fp->fecpriv_stat.rx_dropped++;
++
++    }
++
++    // transmit FIFO underrun
++    if ((events & FEC_EIR_XFUN) != 0)
++    {
++        // reset XFUN event
++        FEC_EIR(base_addr) = FEC_EIR_XFUN;
++		fp->fecpriv_stat.tx_aborted_errors++;
++    }
++
++    // late collision
++    if ((events & FEC_EIR_LC) != 0)
++    {
++        // reset LC event
++        FEC_EIR(base_addr) = FEC_EIR_LC;
++		fp->fecpriv_stat.tx_aborted_errors++;
++    }
++
++    // collision retry limit
++    if ((events & FEC_EIR_RL) != 0)
++    {
++        // reset RL event
++        FEC_EIR(base_addr) = FEC_EIR_RL;
++		fp->fecpriv_stat.tx_aborted_errors++;
++    }
++
++    return 0;
++}
++
++/************************************************************************
++* NAME: fec_interrupt_reinit
++*
++* DESCRIPTION: This function is called from interrupt handler
++*              when controller must be reinitialized.
++*
++*************************************************************************/
++void fec_interrupt_fec_reinit(unsigned long data)
++{
++	int i;
++	struct net_device *dev = (struct net_device*)data;
++	struct fec_priv *fp = netdev_priv(dev);
++	unsigned long base_addr = (unsigned long) dev->base_addr;
++
++printk(KERN_INFO "fecreinit\n");
++	// Initialize reception descriptors and start DMA for the reception
++	for (i = 0; i < FEC_RX_BUF_NUMBER; i++)
++	{
++		if (!fp->askb_rx[i])
++		{
++    		fp->askb_rx[i] = alloc_skb(FEC_MAXBUF_SIZE + 16, GFP_ATOMIC | GFP_DMA);
++        	if (!fp->askb_rx[i])
++		    {
++        		fp->fecpriv_rxdesc[i].dataPointer = 0;
++	        	fp->fecpriv_rxdesc[i].statCtrl = 0;
++    	    	fp->fecpriv_rxdesc[i].length = 0;
++    	    	continue;
++	        }
++			fp->askb_rx[i]->dev = dev;
++    	    skb_reserve(fp->askb_rx[i], 16);
++	    }
++	    fp->fecpriv_rxdesc[i].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[i]->tail);
++		fp->fecpriv_rxdesc[i].statCtrl = MCD_FEC_BUF_READY | MCD_FEC_INTERRUPT;
++    	fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE;
++	}
++
++	fp->fecpriv_rxdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
++	fp->fecpriv_current_rx = 0;
++
++    // restart frame transmission
++	for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
++	{
++		if (fp->fecpriv_txbuf[i])
++		{
++
++			kfree(fp->fecpriv_txbuf[i]);
++			fp->fecpriv_txbuf[i] = NULL;
++    		fp->fecpriv_stat.tx_dropped++;
++		}
++		fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT;
++	}
++	fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
++	fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0;
++
++	// flush entire data cache before restarting the DMA
++#if 0
++/* JKM -- currently running with cache turned off */
++	DcacheFlushInvalidate();
++#endif
++	
++    // restart DMA from beginning
++	MCD_startDma(fp->fecpriv_fec_rx_channel,
++		     (char *) fp->fecpriv_rxdesc, 0,
++		     (unsigned char *) &(FEC_FECRFDR(base_addr)), 0,
++		     FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_rx,
++		     FEC_RX_DMA_PRI, MCD_FECRX_DMA | MCD_INTERRUPT,
++		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
++
++	MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0,
++		     (unsigned char *) &(FEC_FECTFDR(base_addr)), 0,
++		     FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx,
++		     FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT,
++		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
++
++    // Enable FEC
++    FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
++
++	netif_wake_queue(dev);
++
++}
++
++/************************************************************************
++* NAME: fec_interrupt_tx_handler_fec0
++*
++* DESCRIPTION: This is the DMA interrupt handler using  for FEC0
++*              transmission.
++*
++*************************************************************************/
++void fec_interrupt_fec_tx_handler_fec0(void)
++{
++	fec_interrupt_fec_tx_handler(fec_dev[0]);
++}
++
++#ifdef   FEC_2
++/************************************************************************
++* NAME: fec_interrupt_tx_handler_fec1
++*
++* DESCRIPTION: This is the DMA interrupt handler using for the FEC1
++*              transmission.
++*
++*************************************************************************/
++void fec_interrupt_fec_tx_handler_fec1(void)
++{
++	fec_interrupt_fec_tx_handler(fec_dev[1]);
++}
++#endif
++
++/************************************************************************
++* NAME: fec_interrupt_rx_handler_fec0
++*
++* DESCRIPTION: This is the DMA interrupt handler using for the FEC0
++*              reception.
++*
++*************************************************************************/
++void fec_interrupt_fec_rx_handler_fec0(void)
++{
++	fec_interrupt_fec_rx_handler(fec_dev[0]);
++}
++
++#ifdef   FEC_2
++/************************************************************************
++* NAME: fec_interrupt_rx_handler_fec1
++*
++* DESCRIPTION: This is the DMA interrupt handler using for the FEC1
++*              reception.
++*
++*************************************************************************/
++void fec_interrupt_fec_rx_handler_fec1(void)
++{
++	fec_interrupt_fec_rx_handler(fec_dev[1]);
++}
++
++#endif
++#ifndef MODULE
++
++/************************************************************************
++* NAME: fec_mac_setup0
++*
++* DESCRIPTION: This function sets the MAC address of FEC0 from command line
++*
++*************************************************************************/
++int __init fec_mac_setup0(char *s)
++{
++	if(!s || !*s)
++		return 1;
++
++	if(fec_str_to_mac(s, fec_mac_addr_fec0))
++		printk("The MAC address of FEC0 cannot be set from command line");
++	return 1;
++
++}
++
++#ifdef   FEC_2
++
++/************************************************************************
++* NAME: fec_mac_setup1
++*
++* DESCRIPTION: This function sets the MAC address of FEC1 from command line
++*
++*************************************************************************/
++int __init fec_mac_setup1(char *s)
++{
++	if(!s || !*s)
++		return 1;
++
++
++	if(fec_str_to_mac(s, fec_mac_addr_fec1))
++		printk("The MAC address of FEC1 cannot be set from command line");
++	return 1;
++
++}
++#endif
++
++/************************************************************************
++* NAME: fec_str_to_mac
++*
++* DESCRIPTION: This function interprets the character string into MAC addr
++*
++*************************************************************************/
++int fec_str_to_mac( char *str_mac, unsigned char* addr)
++{
++    unsigned long val;
++	char c;
++	unsigned long octet[6], *octetptr = octet;
++	int i;
++again:
++
++	val = 0;
++	while ((c = *str_mac) != '\0')
++	{
++		if ((c>='0')&&(c<='9'))
++		{
++			val = (val * 16) + (c - '0');
++			str_mac++;
++			continue;
++		}
++		else
++		if (((c>='a')&&(c<='f'))||((c>='A')&&(c<='F')))
++		{
++			val = (val << 4) + (c + 10 - (((c>='a')&&(c<='f')) ? 'a' : 'A'));
++			str_mac++;
++			continue;
++		}
++		break;
++	}
++	if (*str_mac == ':')
++	{
++		*octetptr++ = val, str_mac++;
++		if (octetptr >= octet + 6)
++			return 1;
++		goto again;
++	}
++
++	 //Check for trailing characters.
++	if (*str_mac && !(*str_mac==' '))
++		return 1;
++	*octetptr++ = val;
++
++	if ((octetptr - octet)==6)
++	{
++	   for(i=0;i<=6;i++)
++	      addr[i]=octet[i];
++	}
++    else
++		return 1;
++
++	return 0;
++
++}
++#endif
+--- /dev/null
++++ b/drivers/net/fec/fec.h
+@@ -0,0 +1,162 @@
++
++#define   FEC_BASE_ADDR_FEC0                ((unsigned int)MCF_MBAR + 0x9000)
++#define   FEC_BASE_ADDR_FEC1                ((unsigned int)MCF_MBAR + 0x9800)
++
++//#define   FEC_INTC_IMRH_INT_MASK38          (0x00000040)
++//#define   FEC_INTC_IMRH_INT_MASK39          (0x00000080)
++//#define   FEC_INTC_ICR_FEC0                 (0x30)
++//#define   FEC_INTC_ICR_FEC1                 (0x31)
++#define   FEC_FECI2CIRQ                     (0xFFC0)
++#define   FEC_GPIO_PAR_FECI2CIRQ            *(volatile unsigned short*)((unsigned int)MCF_MBAR + 0xA44)
++//#define   FEC_INTC_ICRn(x)                  (*(volatile unsigned char *)(void*)((unsigned int) MCF_MBAR + 0x000740+((x)*0x001)))
++//#define   FEC_INTC_IMRH                     *(volatile unsigned int*)((unsigned int)MCF_MBAR + 0x000708)
++
++#define   FEC_ECR_DISABLE                   (0x00000000)
++
++#define   FEC_ECR(x)                        *(volatile unsigned int *)(x + 0x024)
++#define   FEC_EIR(x)                        *(volatile unsigned int*)(x + 0x004)
++#define   FEC_PALR(x)                       *(volatile unsigned int*)(x + 0x0E4)
++#define   FEC_PAUR(x)                       *(volatile unsigned int*)(x + 0x0E8)
++#define   FEC_IALR(x)                       *(volatile unsigned int*)(x + 0x11C)
++#define   FEC_IAUR(x)                       *(volatile unsigned int*)(x + 0x118)
++#define   FEC_GALR(x)                       *(volatile unsigned int*)(x + 0x124)
++#define   FEC_GAUR(x)                       *(volatile unsigned int*)(x + 0x120)
++#define   FEC_RCR(x)                        *(volatile unsigned int*)(x + 0x084)
++#define   FEC_FECRFCR(x)                    *(volatile unsigned int*)(x + 0x18C)
++#define   FEC_FECRFAR(x)                    *(volatile unsigned int*)(x + 0x198)
++#define   FEC_FECTFCR(x)                    *(volatile unsigned int*)(x + 0x1AC)
++#define   FEC_FECTFAR(x)                    *(volatile unsigned int*)(x + 0x1B8)
++#define   FEC_FECTFWR(x)                    *(volatile unsigned int*)(x + 0x144)
++#define   FEC_CTCWR(x)                      *(volatile unsigned int*)(x + 0x1C8)
++#define   FEC_EIMR(x)                       *(volatile unsigned int*)(x + 0x008)
++#define   FEC_TCR(x)                        *(volatile unsigned int*)(x + 0x0C4)
++#define   FEC_MIBC(x)                       *(volatile unsigned int*)(x + 0x064)
++#define   FEC_MSCR(x)                       *(volatile unsigned int*)(x + 0x044)
++#define   FEC_FECTFDR(x)                    *(volatile unsigned int*)(x + 0x1A4)
++#define   FEC_FECRFDR(x)                    *(volatile unsigned int*)(x + 0x184)
++#define   FEC_FECTFSR(x)                    *(volatile unsigned int*)(x + 0x1A8)
++#define   FEC_FECRFSR(x)					*(volatile unsigned int*)(x + 0x188)
++#define   FECSTAT_RMON_R_PACKETS(x)         *(volatile unsigned int*)(x + 0x284)
++#define   FECSTAT_RMON_T_PACKETS(x)         *(volatile unsigned int*)(x + 0x204)
++#define   FECSTAT_RMON_R_OCTETS(x)          *(volatile unsigned int*)(x + 0x2C4)
++#define   FECSTAT_RMON_T_OCTETS(x)          *(volatile unsigned int*)(x + 0x244)
++#define   FECSTAT_RMON_R_UNDERSIZE(x)       *(volatile unsigned int*)(x + 0x294)
++#define   FECSTAT_RMON_R_OVERSIZE(x)        *(volatile unsigned int*)(x + 0x298)
++#define   FECSTAT_RMON_R_FRAG(x)            *(volatile unsigned int*)(x + 0x29C)
++#define   FECSTAT_RMON_R_JAB(x)             *(volatile unsigned int*)(x + 0x2A0)
++#define   FECSTAT_RMON_R_MC_PKT(x)          *(volatile unsigned int*)(x + 0x28C)
++#define   FECSTAT_RMON_T_COL(x)             *(volatile unsigned int*)(x + 0x224)
++#define   FECSTAT_IEEE_R_ALIGN(x)           *(volatile unsigned int*)(x + 0x2D4)
++#define   FECSTAT_IEEE_R_CRC(x)             *(volatile unsigned int*)(x + 0x2D0)
++#define   FECSTAT_IEEE_R_MACERR(x)          *(volatile unsigned int*)(x + 0x2D8)
++#define   FECSTAT_IEEE_T_CSERR(x)           *(volatile unsigned int*)(x + 0x268)
++#define   FECSTAT_IEEE_T_MACERR(x)          *(volatile unsigned int*)(x + 0x264)
++#define   FECSTAT_IEEE_T_LCOL(x)            *(volatile unsigned int*)(x + 0x25C)
++#define   FECSTAT_IEEE_R_OCTETS_OK(x)       *(volatile unsigned int*)(x + 0x2E0)
++#define   FECSTAT_IEEE_T_OCTETS_OK(x)       *(volatile unsigned int*)(x + 0x274)
++#define   FECSTAT_IEEE_R_DROP(x)            *(volatile unsigned int*)(x + 0x2C8)
++#define   FECSTAT_IEEE_T_DROP(x)            *(volatile unsigned int*)(x + 0x248)
++#define   FECSTAT_IEEE_R_FRAME_OK(x)        *(volatile unsigned int*)(x + 0x2CC)
++#define   FECSTAT_IEEE_T_FRAME_OK(x)        *(volatile unsigned int*)(x + 0x24C)
++#define   FEC_MMFR(x)                       *(volatile unsigned int*)(x + 0x040)
++#define   FEC_FECFRST(x)					*(volatile unsigned int*)(x + 0x1C4)
++
++#define   FEC_MAX_FRM_SIZE                  (1518)
++#define   FEC_MAXBUF_SIZE                   (1520)
++
++// Register values
++#define   FEC_ECR_RESET                     (0x00000001)
++#define   FEC_EIR_CLEAR                     (0xFFFFFFFF)
++#define   FEC_EIR_RL                        (0x00100000)
++#define   FEC_EIR_HBERR                     (0x80000000)
++#define   FEC_EIR_BABR						(0x40000000)   // babbling receive error
++#define   FEC_EIR_BABT						(0x20000000)   // babbling transmit error
++#define   FEC_EIR_TXF		              	(0x08000000)   // transmit frame interrupt
++#define   FEC_EIR_MII						(0x00800000)   // MII interrupt
++#define   FEC_EIR_LC						(0x00200000)   // late collision
++#define   FEC_EIR_XFUN						(0x00080000)   // transmit FIFO underrun
++#define   FEC_EIR_XFERR						(0x00040000)   // transmit FIFO error
++#define   FEC_EIR_RFERR						(0x00020000)   // receive FIFO error
++#define   FEC_RCR_MAX_FRM_SIZE              (FEC_MAX_FRM_SIZE << 16)
++#define   FEC_RCR_MII                       (0x00000004)
++#define   FEC_FECRFCR_FAE					(0x00400000)   // frame accept error
++#define   FEC_FECRFCR_RXW					(0x00200000)   // receive wait condition
++#define   FEC_FECRFCR_UF					(0x00100000)   // receive FIFO underflow
++#define   FEC_FECRFCR_FRM                   (0x08000000)
++#define   FEC_FECRFCR_GR                    (0x7 << 24)
++
++#define   FEC_EIMR_DISABLE					(0x00000000)
++
++#define   FEC_FECRFAR_ALARM                 (0x300)
++#define   FEC_FECTFCR_FRM                   (0x08000000)
++#define   FEC_FECTFCR_GR                    (0x7 << 24)
++#define   FEC_FECTFCR_FAE					(0x00400000)   // frame accept error
++#define   FEC_FECTFCR_TXW					(0x00040000)   // transmit wait condition
++#define   FEC_FECTFCR_UF					(0x00100000)   // transmit FIFO underflow
++#define   FEC_FECTFCR_OF					(0x00080000)   // transmit FIFO overflow
++
++#define   FEC_FECTFAR_ALARM                 (0x100)
++#define   FEC_FECTFWR_XWMRK                 (0x00000000)
++
++#define   FEC_FECTFSR_MSK                   (0xC0B00000)
++#define   FEC_FECTFSR_TXW                   (0x40000000)   // transmit wait condition
++#define   FEC_FECTFSR_FAE                   (0x00800000)   // frame accept error
++#define   FEC_FECTFSR_UF                    (0x00200000)   // transmit FIFO underflow
++#define   FEC_FECTFSR_OF                    (0x00100000)   // transmit FIFO overflow
++
++#define   FEC_FECRFSR_MSK                   (0x80F00000)
++#define   FEC_FECRFSR_FAE                   (0x00800000)   // frame accept error
++#define   FEC_FECRFSR_RXW                   (0x00400000)   // receive wait condition
++#define   FEC_FECRFSR_UF                    (0x00200000)   // receive FIFO underflow
++
++#define   FEC_CTCWR_TFCW_CRC                (0x03000000)
++#define   FEC_TCR_FDEN                      (0x00000004)
++#define   FEC_TCR_HBC                       (0x00000002)
++#define   FEC_RCR_DRT                       (0x00000002)
++#define   FEC_EIMR_MASK                     (FEC_EIR_RL | FEC_EIR_HBERR)
++#define   FEC_ECR_ETHEREN                   (0x00000002)
++#define   FEC_FECTFCR_MSK                   (0x00FC0000)
++#define   FEC_FECRFCR_MSK                   (0x00F80000)
++#define   FEC_EIR_GRA                       (0x10000000)
++#define   FEC_TCR_GTS                       (0x00000001)
++#define   FEC_MIBC_ENABLE                   (0x00000000)
++#define   FEC_MIB_LEN                       (228)
++#define   FEC_PHY_ADDR                      (0x01)
++
++#define FEC_RX_DMA_PRI                      (6)
++#define FEC_TX_DMA_PRI                      (6)
++
++#define   FEC_TX_BUF_NUMBER                 (8)
++#define   FEC_RX_BUF_NUMBER                 (64)
++
++#define   FEC_TX_INDEX_MASK                 (0x7)
++#define   FEC_RX_INDEX_MASK                 (0x3f)
++
++#define   FEC_RX_DESC_FEC0                  SYS_SRAM_FEC_START
++#define   FEC_TX_DESC_FEC0                  FEC_RX_DESC_FEC0 + FEC_RX_BUF_NUMBER * sizeof(MCD_bufDescFec)
++
++#define   FEC_RX_DESC_FEC1                  SYS_SRAM_FEC_START + SYS_SRAM_FEC_SIZE/2
++#define   FEC_TX_DESC_FEC1                  FEC_RX_DESC_FEC1 + FEC_RX_BUF_NUMBER * sizeof(MCD_bufDescFec)
++
++#define   FEC_EIR_MII                       (0x00800000)
++#define   FEC_MMFR_READ                     (0x60020000)
++#define   FEC_MMFR_WRITE                    (0x50020000)
++
++#define   FEC_FLAGS_RX                      (0x00000001)
++
++#define   FEC_CRCPOL                        (0xEDB88320)
++
++#define   FEC_MII_TIMEOUT                   (2)
++#define   FEC_GR_TIMEOUT                    (1)
++#define   FEC_TX_TIMEOUT                    (1)
++#define   FEC_RX_TIMEOUT                    (1)
++
++#define   FEC_SW_RST                        0x2000000
++#define   FEC_RST_CTL                       0x1000000
++
++int fec_read_mii(unsigned int base_addr, unsigned int pa, unsigned int ra,
++		 unsigned int *data);
++int fec_write_mii(unsigned int base_addr, unsigned int pa, unsigned int ra,
++		  unsigned int data);
++
++#define init_transceiver ks8721_init_transceiver
+--- /dev/null
++++ b/drivers/net/fec/ks8721.c
+@@ -0,0 +1,125 @@
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/ptrace.h>
++#include <linux/errno.h>
++#include <linux/ioport.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/skbuff.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/bitops.h>
++
++#if 0
++#include <linux/config.h>
++#include <linux/sched.h>
++#include <linux/errno.h>
++#include <asm/coldfire.h>
++#endif
++#include <asm/coldfire.h>
++#include <asm/mcfsim.h>
++
++#include   "fec.h"
++#include   "ks8721.h"
++
++#ifdef   CONFIG_FEC_548x_AUTO_NEGOTIATION
++#define   KS8721_AUTO_NEGOTIATION_ENABLE
++#endif
++
++/************************************************************************
++* +NAME: ks8721_init_transceiver
++*
++* DESCRIPTION: This function initializes the transceiver
++*
++* RETURNS: If no error occurs, this function returns zero.
++*          Otherwise, it returns 1
++*************************************************************************/
++
++int ks8721_init_transceiver(unsigned long base_addr, int *fduplex)
++{
++
++	int data;
++	unsigned long time;
++	int flag = 1;
++
++	int result;
++
++	// Set the frequency of MII
++	FEC_MSCR(base_addr) = FEC_MII_SPEED;
++
++	// Reset
++	if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, KS8721_CTRL_RESET)))
++		return result;
++
++	// Read back    
++	if ((result = fec_read_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, &data)) != 0)
++		return result;
++
++	// If reset bit is set, return
++	if (data & KS8721_CTRL_RESET)
++		return -ETIME;
++
++#ifdef KS8721_AUTO_NEGOTIATION_ENABLE
++
++	// Disable  the auto-negotiation 
++	if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, 0)) != 0)
++		return result;
++
++	// Set the auto-negotiation advertisement register 
++	if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_ANADV, KS8721_ANADV_ADV_ALL)) != 0)
++		return result;
++
++	// Enable the auto-negotiation
++	if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, KS8721_CTRL_AN_ENABLE)) != 0)
++		return result;
++
++	// Read PHY status register
++	if ((result = fec_read_mii(base_addr, FEC_PHY_ADDR, KS8721_STAT, &data)) != 0)
++		return result;
++	// Set the current time
++	time = jiffies;
++
++	// Wait for the auto-negotiation completion
++	while (!(data & KS8721_STAT_ANCOMPLETE))
++	{
++
++		if (jiffies - time > KS8721_TIMEOUT * HZ)
++		{
++			flag = 0;
++			break;
++		}
++
++		schedule();
++
++		// Read PHY status register
++		if ((result = fec_read_mii(base_addr, FEC_PHY_ADDR, KS8721_STAT, &data)) != 0)
++			return result;
++	}
++
++	if (flag)
++	{
++		// Set the duplex flag     
++		if (data & KS8721_STAT_FDUPLEX)
++			*fduplex = 1;
++		else
++			*fduplex = 0;
++
++		return 0;
++	}
++
++#endif
++
++	// Set the default mode (Full duplex, 100 Mbps) 
++	if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, KS8721_CTRL_DEFAULT_MODE)) != 0)
++		return result;
++	*fduplex = KS8721_CTRL_DEFAULT_MODE & 0x100;
++
++	return 0;
++
++}
+--- /dev/null
++++ b/drivers/net/fec/ks8721.h
+@@ -0,0 +1,21 @@
++
++#define   FEC_MII_SPEED              (((unsigned int)(MCF_BUSCLK / 5000000)) << 1)
++
++// Numbers of the transceiver registers 
++#define   KS8721_CTRL                0x00
++#define   KS8721_ANADV               0x04
++#define   KS8721_STAT                0x01
++
++// Register values
++#define   KS8721_CTRL_RESET          0x8000
++#define   KS8721_ANADV_ADV_ALL       0x01E1
++#define   KS8721_CTRL_AN_ENABLE      0x1280
++#define   KS8721_CTRL_DEFAULT_MODE   0x2100
++#define   KS8721_STAT_ANCOMPLETE     0x0020
++#define   KS8721_STAT_LINK           0x0004
++#define   KS8721_STAT_FDUPLEX        0x5000
++
++// Timeout for the auto-negotiation mode
++#define   KS8721_TIMEOUT             5
++
++int ks8721_init_transceiver(unsigned long base_addr, int *fduplex);
+--- /dev/null
++++ b/include/asm-m68k/MCD_dma.h
+@@ -0,0 +1,408 @@
++/*********************************************************************
++ *
++ * Copyright (C) 2004  Motorola, Inc.
++ *  MOTOROLA, INC. All Rights Reserved.
++ *  You are hereby granted a copyright license to use
++ *  the SOFTWARE so long as this entire notice is
++ *  retained without alteration in any modified and/or redistributed
++ *  versions, and that such modified versions are clearly identified
++ *  as such. No licenses are granted by implication, estoppel or
++ *  otherwise under any patents or trademarks of Motorola, Inc. This
++ *  software is provided on an "AS IS" basis and without warranty.
++ *
++ *  To the maximum extent permitted by applicable law, MOTOROLA
++ *  DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING
++ *  IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
++ *  PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE
++ *  SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY
++ *  ACCOMPANYING WRITTEN MATERIALS.
++ *
++ *  To the maximum extent permitted by applicable law, IN NO EVENT
++ *  SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING
++ *  WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
++ *  INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY
++ *  LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
++ *
++ *  Motorola assumes no responsibility for the maintenance and support
++ *  of this software
++ ********************************************************************/
++
++/*
++ * File:        MCD_dma.h
++ * Purpose:     Main header file for multi-channel DMA API.
++ *
++ * Notes:
++ *
++ * Modifications:
++ */
++#ifndef _MCD_API_H
++#define _MCD_API_H
++
++#include <asm/types.h>
++
++/*
++ * Turn Execution Unit tasks ON (#define) or OFF (#undef)
++ */
++#undef MCD_INCLUDE_EU
++
++/*
++ * Number of DMA channels
++ */
++#define NCHANNELS 16
++
++/*
++ * Total number of variants
++ */
++#ifdef MCD_INCLUDE_EU
++#define NUMOFVARIANTS   6
++#else
++#define NUMOFVARIANTS   4
++#endif
++
++/*
++ * Define sizes of the various tables
++ */
++#define TASK_TABLE_SIZE     (NCHANNELS*32)
++#define VAR_TAB_SIZE        (128)
++#define CONTEXT_SAVE_SIZE   (128)
++#define FUNCDESC_TAB_SIZE   (256)
++
++#ifdef MCD_INCLUDE_EU
++#define FUNCDESC_TAB_NUM    16
++#else
++#define FUNCDESC_TAB_NUM    1
++#endif
++
++
++#ifndef DEFINESONLY
++
++/*
++ * Portability typedefs
++ */
++ /*
++#ifndef s32
++typedef int s32;
++#endif
++#ifndef u32
++typedef unsigned int u32;
++#endif
++#ifndef s16
++typedef short s16;
++#endif
++#ifndef u16
++typedef unsigned short u16;
++#endif
++#ifndef s8
++typedef char s8;
++#endif
++#ifndef u8
++typedef unsigned char u8;
++#endif
++*/
++/*
++ * These structures represent the internal registers of the
++ * multi-channel DMA
++ */
++struct dmaRegs_s {
++   u32 taskbar;         /* task table base address register */
++   u32 currPtr;
++   u32 endPtr;
++   u32 varTablePtr;
++   u16 dma_rsvd0;
++   u16 ptdControl;      /* ptd control */
++   u32 intPending;      /* interrupt pending register */
++   u32 intMask;         /* interrupt mask register */
++   u16 taskControl[16]; /* task control registers */
++   u8  priority[32];    /* priority registers */
++   u32 initiatorMux;    /* initiator mux control */
++   u32 taskSize0;       /* task size control register 0. */
++   u32 taskSize1;       /* task size control register 1. */
++   u32 dma_rsvd1;       /* reserved */
++   u32 dma_rsvd2;       /* reserved */
++   u32 debugComp1;      /* debug comparator 1 */
++   u32 debugComp2;      /* debug comparator 2 */
++   u32 debugControl;    /* debug control */
++   u32 debugStatus;     /* debug status */
++   u32 ptdDebug;        /* priority task decode debug */
++   u32 dma_rsvd3[31];   /* reserved */
++};
++typedef volatile struct dmaRegs_s dmaRegs;
++
++#endif
++
++/*
++ * PTD contrl reg bits
++ */
++#define PTD_CTL_TSK_PRI         0x8000
++#define PTD_CTL_COMM_PREFETCH   0x0001
++
++/*
++ * Task Control reg bits and field masks
++ */
++#define TASK_CTL_EN             0x8000
++#define TASK_CTL_VALID          0x4000
++#define TASK_CTL_ALWAYS         0x2000
++#define TASK_CTL_INIT_MASK      0x1f00
++#define TASK_CTL_ASTRT          0x0080
++#define TASK_CTL_HIPRITSKEN     0x0040
++#define TASK_CTL_HLDINITNUM     0x0020
++#define TASK_CTL_ASTSKNUM_MASK  0x000f
++
++/*
++ * Priority reg bits and field masks
++ */
++#define PRIORITY_HLD            0x80
++#define PRIORITY_PRI_MASK       0x07
++
++/*
++ * Debug Control reg bits and field masks
++ */
++#define DBG_CTL_BLOCK_TASKS_MASK    0xffff0000
++#define DBG_CTL_AUTO_ARM            0x00008000
++#define DBG_CTL_BREAK               0x00004000
++#define DBG_CTL_COMP1_TYP_MASK      0x00003800
++#define DBG_CTL_COMP2_TYP_MASK      0x00000070
++#define DBG_CTL_EXT_BREAK           0x00000004
++#define DBG_CTL_INT_BREAK           0x00000002
++
++/*
++ * PTD Debug reg selector addresses
++ * This reg must be written with a value to show the contents of
++ * one of the desired internal register.
++ */
++#define PTD_DBG_REQ             0x00 /* shows the state of 31 initiators */
++#define PTD_DBG_TSK_VLD_INIT    0x01 /* shows which 16 tasks are valid and
++                                        have initiators asserted */
++
++
++/*
++ * General return values
++ */
++#define MCD_OK                   0
++#define MCD_ERROR               -1
++#define MCD_TABLE_UNALIGNED     -2
++#define MCD_CHANNEL_INVALID     -3
++
++/*
++ * MCD_initDma input flags
++ */
++#define MCD_RELOC_TASKS         0x00000001
++#define MCD_NO_RELOC_TASKS      0x00000000
++#define MCD_COMM_PREFETCH_EN    0x00000002  /* Commbus Prefetching - MCF547x/548x ONLY */
++
++/*
++ * MCD_dmaStatus Status Values for each channel
++ */
++#define MCD_NO_DMA  1 /* No DMA has been requested since reset */
++#define MCD_IDLE    2 /* DMA active, but the initiator is currently inactive */
++#define MCD_RUNNING 3 /* DMA active, and the initiator is currently active */
++#define MCD_PAUSED  4 /* DMA active but it is currently paused */
++#define MCD_HALTED  5 /* the most recent DMA has been killed with MCD_killTask() */
++#define MCD_DONE    6 /* the most recent DMA has completed. */
++
++
++/*
++ * MCD_startDma parameter defines
++ */
++
++/*
++ * Constants for the funcDesc parameter
++ */
++/* Byte swapping: */
++#define MCD_NO_BYTE_SWAP    0x00045670  /* to disable byte swapping. */
++#define MCD_BYTE_REVERSE    0x00076540  /* to reverse the bytes of each u32 of the DMAed data. */
++#define MCD_U16_REVERSE     0x00067450  /* to reverse the 16-bit halves of
++                                           each 32-bit data value being DMAed.*/
++#define MCD_U16_BYTE_REVERSE    0x00054760 /* to reverse the byte halves of each
++                                            16-bit half of each 32-bit data value DMAed */
++#define MCD_NO_BIT_REV  0x00000000  /* do not reverse the bits of each byte DMAed. */
++#define MCD_BIT_REV     0x00088880  /* reverse the bits of each byte DMAed */
++/* CRCing: */
++#define MCD_CRC16       0xc0100000  /* to perform CRC-16 on DMAed data. */
++#define MCD_CRCCCITT    0xc0200000  /* to perform CRC-CCITT on DMAed data. */
++#define MCD_CRC32       0xc0300000  /* to perform CRC-32 on DMAed data. */
++#define MCD_CSUMINET    0xc0400000  /* to perform internet checksums on DMAed data.*/
++#define MCD_NO_CSUM     0xa0000000  /* to perform no checksumming. */
++
++#define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | MCD_NO_CSUM)
++#define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM)
++
++/*
++ * Constants for the flags parameter
++ */
++#define MCD_TT_FLAGS_RL   0x00000001 /* Read line */
++#define MCD_TT_FLAGS_CW   0x00000002 /* Combine Writes */
++#define MCD_TT_FLAGS_SP   0x00000004 /* Speculative prefetch(XLB) MCF547x/548x ONLY  */
++#define MCD_TT_FLAGS_MASK 0x000000ff
++#define MCD_TT_FLAGS_DEF  (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW)
++
++#define MCD_SINGLE_DMA  0x00000100 /* Unchained DMA */
++#define MCD_CHAIN_DMA              /* TBD */
++#define MCD_EU_DMA                 /* TBD */
++#define MCD_FECTX_DMA   0x00001000 /* FEC TX ring DMA */
++#define MCD_FECRX_DMA   0x00002000 /* FEC RX ring DMA */
++
++
++/* these flags are valid for MCD_startDma and the chained buffer descriptors */
++#define MCD_BUF_READY   0x80000000 /* indicates that this buffer is now under the DMA's control */
++#define MCD_WRAP        0x20000000 /* to tell the FEC Dmas to wrap to the first BD */
++#define MCD_INTERRUPT   0x10000000 /* to generate an interrupt after completion of the DMA. */
++#define MCD_END_FRAME   0x08000000 /* tell the DMA to end the frame when transferring
++                                      last byte of data in buffer */
++#define MCD_CRC_RESTART 0x40000000 /* to empty out the accumulated checksum
++                                      prior to performing the DMA. */
++
++/* Defines for the FEC buffer descriptor control/status word*/
++#define MCD_FEC_BUF_READY   0x8000
++#define MCD_FEC_WRAP        0x2000
++#define MCD_FEC_INTERRUPT   0x1000
++#define MCD_FEC_END_FRAME   0x0800
++
++
++/*
++ * Defines for general intuitiveness
++ */
++
++#define MCD_TRUE  1
++#define MCD_FALSE 0
++
++/*
++ * Three different cases for destination and source.
++ */
++#define MINUS1          -1
++#define ZERO            0
++#define PLUS1           1
++
++#ifndef DEFINESONLY
++
++/* Task Table Entry struct*/
++typedef struct {
++    u32 TDTstart;   /* task descriptor table start */
++    u32 TDTend;     /* task descriptor table end */
++    u32 varTab;     /* variable table start */
++    u32 FDTandFlags;    /* function descriptor table start and flags */
++    volatile u32 descAddrAndStatus;
++    volatile u32 modifiedVarTab;
++    u32 contextSaveSpace;   /* context save space start */
++    u32 literalBases;
++} TaskTableEntry;
++
++
++/* Chained buffer descriptor */
++typedef volatile struct MCD_bufDesc_struct MCD_bufDesc;
++struct MCD_bufDesc_struct {
++   u32 flags;         /* flags describing the DMA */
++   u32 csumResult;    /* checksum from checksumming performed since last checksum reset */
++   s8  *srcAddr;      /* the address to move data from */
++   s8  *destAddr;     /* the address to move data to */
++   s8  *lastDestAddr; /* the last address written to */
++   u32 dmaSize;       /* the number of bytes to transfer independent of the transfer size */
++   MCD_bufDesc *next; /* next buffer descriptor in chain */
++   u32 info;          /* private information about this descriptor;  DMA does not affect it */
++};
++
++/* Progress Query struct */
++typedef volatile struct MCD_XferProg_struct {
++   s8 *lastSrcAddr;         /* the most-recent or last, post-increment source address */
++   s8 *lastDestAddr;        /* the most-recent or last, post-increment destination address */
++   u32  dmaSize;            /* the amount of data transferred for the current buffer */
++   MCD_bufDesc *currBufDesc;/* pointer to the current buffer descriptor being DMAed */
++} MCD_XferProg;
++
++
++/* FEC buffer descriptor */
++typedef volatile struct MCD_bufDescFec_struct {
++    u16 statCtrl;
++    u16 length;
++    u32 dataPointer;
++} MCD_bufDescFec;
++
++
++/*************************************************************************/
++/*
++ * API function Prototypes  - see MCD_dmaApi.c for further notes
++ */
++
++/*
++ * MCD_startDma starts a particular kind of DMA .
++ */
++int MCD_startDma (
++   int channel,   /* the channel on which to run the DMA */
++   s8  *srcAddr,  /* the address to move data from, or buffer-descriptor address */
++   s16 srcIncr,   /* the amount to increment the source address per transfer */
++   s8  *destAddr, /* the address to move data to */
++   s16 destIncr,  /* the amount to increment the destination address per transfer */
++   u32 dmaSize,   /* the number of bytes to transfer independent of the transfer size */
++   u32 xferSize,  /* the number bytes in of each data movement (1, 2, or 4) */
++   u32 initiator, /* what device initiates the DMA */
++   int priority,  /* priority of the DMA */
++   u32 flags,     /* flags describing the DMA */
++   u32 funcDesc   /* a description of byte swapping, bit swapping, and CRC actions */
++);
++
++/* 
++ * MCD_initDma() initializes the DMA API by setting up a pointer to the DMA 
++ * registers, relocating and creating the appropriate task structures, and 
++ * setting up some global settings
++ */
++int MCD_initDma (dmaRegs *sDmaBarAddr, void *taskTableDest, u32 flags);
++
++/* 
++ * MCD_dmaStatus() returns the status of the DMA on the requested channel.
++ */
++int MCD_dmaStatus (int channel);
++
++/* 
++ * MCD_XferProgrQuery() returns progress of DMA on requested channel
++ */
++int MCD_XferProgrQuery (int channel, MCD_XferProg *progRep);
++
++/* 
++ * MCD_killDma() halts the DMA on the requested channel, without any
++ * intention of resuming the DMA.
++ */
++int MCD_killDma (int channel);
++
++/* 
++ * MCD_continDma() continues a DMA which as stopped due to encountering an
++ * unready buffer descriptor.
++ */
++int MCD_continDma (int channel);
++
++/* 
++ * MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is
++ * running on that channel). 
++ */
++int MCD_pauseDma (int channel);
++
++/* 
++ * MCD_resumeDma() resumes the DMA on a given channel (if any DMA is
++ * running on that channel).
++ */
++int MCD_resumeDma (int channel);
++
++/* 
++ * MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA
++ */
++int MCD_csumQuery (int channel, u32 *csum);
++
++/* 
++ * MCD_getCodeSize provides the packed size required by the microcoded task
++ * and structures.
++ */
++int MCD_getCodeSize(void);
++
++/*
++ * MCD_getVersion provides a pointer to a version string and returns a
++ * version number.
++ */
++int MCD_getVersion(char **longVersion);
++
++/* macro for setting a location in the variable table */
++#define MCD_SET_VAR(taskTab,idx,value) ((u32 *)(taskTab)->varTab)[idx] = value
++   /* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function,
++      so I'm avoiding surrounding it with "do {} while(0)" */
++
++#endif  /* DEFINESONLY */
++
++#endif /* _MCD_API_H */
+--- a/include/asm-m68k/coldfire.h
++++ b/include/asm-m68k/coldfire.h
+@@ -7,6 +7,7 @@
+ #define MCF_SRAM	0x80000000
+ #elif defined(CONFIG_M547X_8X)
+ #define MCF_MBAR	0xE0000000
++#define MCF_MMUBAR	0xE1000000
+ #define MCF_RAMBAR0	0xE3000000
+ #define MCF_RAMBAR1	0xE3001000
+ #endif
+--- a/include/asm-m68k/dma.h
++++ b/include/asm-m68k/dma.h
+@@ -1,16 +1,120 @@
+ #ifndef _M68K_DMA_H
+ #define _M68K_DMA_H 1
+ 
+-
+ /* it's useless on the m68k, but unfortunately needed by the new
+    bootmem allocator (but this should do it for this) */
+ #define MAX_DMA_ADDRESS PAGE_OFFSET
+ 
++#ifndef CONFIG_COLDFIRE
+ #define MAX_DMA_CHANNELS 8
+ 
+ extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
+ extern void free_dma(unsigned int dmanr);	/* release it again */
+ 
++#else /* not (defined(CONFIG_MCF5474) || defined(CONFIG_MCF5484) || defined(CONFIG_MCF5475) || defined(CONFIG_MCF5485)) */
++
++/************************************************
++ * 	Multichannel DMA definitions		*
++ ************************************************/
++#ifdef CONFIG_MCD_DMA
++#include <asm/MCD_dma.h>
++#include <asm/m5485dma.h>
++
++struct scatterlist;
++
++#define MAX_DMA_CHANNELS NCHANNELS
++/*
++ *  identifiers for each initiator/requestor
++ */
++#define DMA_ALWAYS      (0)
++#define DMA_DSPI_RX     (1)
++#define DMA_DSPI_TX     (2)
++#define DMA_DREQ0       (3)
++#define DMA_PSC0_RX     (4)
++#define DMA_PSC0_TX     (5)
++#define DMA_USBEP0      (6)
++#define DMA_USBEP1      (7)
++#define DMA_USBEP2      (8)
++#define DMA_USBEP3      (9)
++#define DMA_PCI_TX      (10)
++#define DMA_PCI_RX      (11)
++#define DMA_PSC1_RX     (12)
++#define DMA_PSC1_TX     (13)
++#define DMA_I2C_RX      (14)
++#define DMA_I2C_TX      (15)
++#define DMA_FEC0_RX     (16)
++#define DMA_FEC0_TX     (17)
++#define DMA_FEC1_RX     (18)
++#define DMA_FEC1_TX     (19)
++#define DMA_DREQ1       (20)
++#define DMA_CTM0        (21)
++#define DMA_CTM1        (22)
++#define DMA_CTM2        (23)
++#define DMA_CTM3        (24)
++#define DMA_CTM4        (25)
++#define DMA_CTM5        (26)
++#define DMA_CTM6        (27)
++#define DMA_CTM7        (28)
++#define DMA_USBEP4      (29)
++#define DMA_USBEP5      (30)
++#define DMA_USBEP6      (31)
++#define DMA_PSC2_RX     (32)
++#define DMA_PSC2_TX     (33)
++#define DMA_PSC3_RX     (34)
++#define DMA_PSC3_TX     (35)
++#define DMA_FEC_RX(x)   ((x == 0) ? DMA_FEC0_RX : DMA_FEC1_RX)
++#define DMA_FEC_TX(x)   ((x == 0) ? DMA_FEC0_TX : DMA_FEC1_TX)
++
++int  dma_set_initiator(int);
++unsigned int dma_get_initiator(int);
++void dma_remove_initiator(int);
++int dma_set_channel(int);
++int dma_get_channel(int);
++void dma_remove_channel(int);
++int dma_set_channel_fec(int requestor);
++int dma_connect(int channel, int address);
++int dma_disconnect(int channel);
++void dma_remove_channel_by_number(int channel);
++int dma_init(void);
++
++#endif /* CONFIG_MCD_DMA */
++
++extern spinlock_t dma_spin_lock;
++
++static __inline__ unsigned long claim_dma_lock(void)
++{
++	unsigned long flags;
++	spin_lock_irqsave(&dma_spin_lock, flags);
++	return flags;
++}
++
++static __inline__ void release_dma_lock(unsigned long flags)
++{
++	spin_unlock_irqrestore(&dma_spin_lock, flags);
++}
++
++
++/*
++ *  Linux standard DMA stuff
++ */
++#if 0
++int  request_dma(unsigned int channel, const char * device_id);
++void free_dma(unsigned int channel);
++void enable_dma(unsigned int channel);
++void disable_dma(unsigned int channel);
++int  dma_channel_active(unsigned int channel);
++void set_dma_sg(unsigned int channel, struct scatterlist *sg, int nr_sg);
++void set_dma_page(unsigned int channel, char pagenr);
++void set_dma_addr(unsigned int channel, unsigned long physaddr);
++void set_dma_count(unsigned int channel, unsigned long count);
++void set_dma_mode(unsigned int channel, unsigned int mode);
++void set_dma_speed(unsigned int channel, int cycle_ns);
++int  get_dma_residue(unsigned int channel);
++#endif
++#define clear_dma_ff(channel)
++
++#endif /* not (defined(CONFIG_MCF5474) || defined(CONFIG_MCF5484) || defined(CONFIG_MCF5475) || defined(CONFIG_MCF5485)) */
++
+ #ifdef CONFIG_PCI
+ extern int isa_dma_bridge_buggy;
+ #else
+--- /dev/null
++++ b/include/asm-m68k/m5485dma.h
+@@ -0,0 +1,97 @@
++/*
++ *	m5485dma.h -- ColdFire 547x/548x DMA controller support.
++ */
++#ifndef __MCF548X_DMA_H__
++#define __MCF548X_DMA_H__
++
++
++/* Register read/write macros */
++#define MCF_DMA_DIPR    (*(volatile u32*)(void*)(MCF_MBAR+0x008014))
++#define MCF_DMA_DIMR    (*(volatile u32*)(void*)(MCF_MBAR+0x008018))
++#define MCF_DMA_IMCR    (*(volatile u32*)(void*)(MCF_MBAR+0x00805C))
++
++/* Bit definitions and macros for MCF_DMA_DIPR */
++#define MCF_DMA_DIPR_TASK0           (0x00000001)
++#define MCF_DMA_DIPR_TASK1           (0x00000002)
++#define MCF_DMA_DIPR_TASK2           (0x00000004)
++#define MCF_DMA_DIPR_TASK3           (0x00000008)
++#define MCF_DMA_DIPR_TASK4           (0x00000010)
++#define MCF_DMA_DIPR_TASK5           (0x00000020)
++#define MCF_DMA_DIPR_TASK6           (0x00000040)
++#define MCF_DMA_DIPR_TASK7           (0x00000080)
++#define MCF_DMA_DIPR_TASK8           (0x00000100)
++#define MCF_DMA_DIPR_TASK9           (0x00000200)
++#define MCF_DMA_DIPR_TASK10          (0x00000400)
++#define MCF_DMA_DIPR_TASK11          (0x00000800)
++#define MCF_DMA_DIPR_TASK12          (0x00001000)
++#define MCF_DMA_DIPR_TASK13          (0x00002000)
++#define MCF_DMA_DIPR_TASK14          (0x00004000)
++#define MCF_DMA_DIPR_TASK15          (0x00008000)
++
++/* Bit definitions and macros for MCF_DMA_DIMR */
++#define MCF_DMA_DIMR_TASK0           (0x00000001)
++#define MCF_DMA_DIMR_TASK1           (0x00000002)
++#define MCF_DMA_DIMR_TASK2           (0x00000004)
++#define MCF_DMA_DIMR_TASK3           (0x00000008)
++#define MCF_DMA_DIMR_TASK4           (0x00000010)
++#define MCF_DMA_DIMR_TASK5           (0x00000020)
++#define MCF_DMA_DIMR_TASK6           (0x00000040)
++#define MCF_DMA_DIMR_TASK7           (0x00000080)
++#define MCF_DMA_DIMR_TASK8           (0x00000100)
++#define MCF_DMA_DIMR_TASK9           (0x00000200)
++#define MCF_DMA_DIMR_TASK10          (0x00000400)
++#define MCF_DMA_DIMR_TASK11          (0x00000800)
++#define MCF_DMA_DIMR_TASK12          (0x00001000)
++#define MCF_DMA_DIMR_TASK13          (0x00002000)
++#define MCF_DMA_DIMR_TASK14          (0x00004000)
++#define MCF_DMA_DIMR_TASK15          (0x00008000)
++
++/* Bit definitions and macros for MCF_DMA_IMCR */
++#define MCF_DMA_IMCR_SRC16(x)        (((x)&0x00000003)<<0)
++#define MCF_DMA_IMCR_SRC17(x)        (((x)&0x00000003)<<2)
++#define MCF_DMA_IMCR_SRC18(x)        (((x)&0x00000003)<<4)
++#define MCF_DMA_IMCR_SRC19(x)        (((x)&0x00000003)<<6)
++#define MCF_DMA_IMCR_SRC20(x)        (((x)&0x00000003)<<8)
++#define MCF_DMA_IMCR_SRC21(x)        (((x)&0x00000003)<<10)
++#define MCF_DMA_IMCR_SRC22(x)        (((x)&0x00000003)<<12)
++#define MCF_DMA_IMCR_SRC23(x)        (((x)&0x00000003)<<14)
++#define MCF_DMA_IMCR_SRC24(x)        (((x)&0x00000003)<<16)
++#define MCF_DMA_IMCR_SRC25(x)        (((x)&0x00000003)<<18)
++#define MCF_DMA_IMCR_SRC26(x)        (((x)&0x00000003)<<20)
++#define MCF_DMA_IMCR_SRC27(x)        (((x)&0x00000003)<<22)
++#define MCF_DMA_IMCR_SRC28(x)        (((x)&0x00000003)<<24)
++#define MCF_DMA_IMCR_SRC29(x)        (((x)&0x00000003)<<26)
++#define MCF_DMA_IMCR_SRC30(x)        (((x)&0x00000003)<<28)
++#define MCF_DMA_IMCR_SRC31(x)        (((x)&0x00000003)<<30)
++#define MCF_DMA_IMCR_SRC16_FEC0RX    (0x00000000)
++#define MCF_DMA_IMCR_SRC17_FEC0TX    (0x00000000)
++#define MCF_DMA_IMCR_SRC18_FEC0RX    (0x00000020)
++#define MCF_DMA_IMCR_SRC19_FEC0TX    (0x00000080)
++#define MCF_DMA_IMCR_SRC20_FEC1RX    (0x00000100)
++#define MCF_DMA_IMCR_SRC21_DREQ1     (0x00000000)
++#define MCF_DMA_IMCR_SRC21_FEC1TX    (0x00000400)
++#define MCF_DMA_IMCR_SRC22_FEC0RX    (0x00001000)
++#define MCF_DMA_IMCR_SRC23_FEC0TX    (0x00004000)
++#define MCF_DMA_IMCR_SRC24_CTM0      (0x00010000)
++#define MCF_DMA_IMCR_SRC24_FEC1RX    (0x00020000)
++#define MCF_DMA_IMCR_SRC25_CTM1      (0x00040000)
++#define MCF_DMA_IMCR_SRC25_FEC1TX    (0x00080000)
++#define MCF_DMA_IMCR_SRC26_USBEP4    (0x00000000)
++#define MCF_DMA_IMCR_SRC26_CTM2      (0x00200000)
++#define MCF_DMA_IMCR_SRC27_USBEP5    (0x00000000)
++#define MCF_DMA_IMCR_SRC27_CTM3      (0x00800000)
++#define MCF_DMA_IMCR_SRC28_USBEP6    (0x00000000)
++#define MCF_DMA_IMCR_SRC28_CTM4      (0x01000000)
++#define MCF_DMA_IMCR_SRC28_DREQ1     (0x02000000)
++#define MCF_DMA_IMCR_SRC28_PSC2RX    (0x03000000)
++#define MCF_DMA_IMCR_SRC29_DREQ1     (0x04000000)
++#define MCF_DMA_IMCR_SRC29_CTM5      (0x08000000)
++#define MCF_DMA_IMCR_SRC29_PSC2TX    (0x0C000000)
++#define MCF_DMA_IMCR_SRC30_FEC1RX    (0x00000000)
++#define MCF_DMA_IMCR_SRC30_CTM6      (0x10000000)
++#define MCF_DMA_IMCR_SRC30_PSC3RX    (0x30000000)
++#define MCF_DMA_IMCR_SRC31_FEC1TX    (0x00000000)
++#define MCF_DMA_IMCR_SRC31_CTM7      (0x80000000)
++#define MCF_DMA_IMCR_SRC31_PSC3TX    (0xC0000000)
++
++#endif /* __MCF548X_DMA_H__ */
+--- /dev/null
++++ b/include/asm-m68k/m5485sram.h
+@@ -0,0 +1,12 @@
++#ifndef SYS_SRAM_H
++#define SYS_SRAM_H
++
++
++#define SYS_SRAM_DMA_START        MCF_MBAR + 0x10000
++#define SYS_SRAM_DMA_SIZE         8192
++#define SYS_SRAM_FEC_START        SYS_SRAM_DMA_START + SYS_SRAM_DMA_SIZE
++#define SYS_SRAM_FEC_SIZE         2048
++#define SYS_SRAM_SEC_START        SYS_SRAM_FEC_START + SYS_SRAM_FEC_SIZE
++#define SYS_SRAM_SEC_SIZE         1280
++
++#endif /* SYS_SRAM_H */
diff --git a/target/linux/coldfire/patches/046-mcfv4e_kern_to_phys.patch b/target/linux/coldfire/patches/046-mcfv4e_kern_to_phys.patch
new file mode 100644
index 0000000000..b11178978d
--- /dev/null
+++ b/target/linux/coldfire/patches/046-mcfv4e_kern_to_phys.patch
@@ -0,0 +1,1614 @@
+From 13fc0abf4b5da6f18dea15fd31697655615a79fc Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 12 Mar 2008 15:39:03 -0600
+Subject: [PATCH] Move kernel to physical sdram base address.
+
+Work based on the patches from Systec GMBH.  Also DMA support,
+uBoot integration, FEC fixes, and assorted cleanups.
+
+Uber patch needs to be split up.
+
+LTIBName: mcfv4e-kern-to-phys
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/config.c           |  102 ++-----
+ arch/m68k/coldfire/dma.c              |    7 +-
+ arch/m68k/coldfire/entry.S            |   10 +
+ arch/m68k/coldfire/head.S             |   53 +++-
+ arch/m68k/coldfire/mcf5445x-devices.c |    2 +
+ arch/m68k/coldfire/mcf5445x-pci.c     |    3 +
+ arch/m68k/coldfire/signal.c           |    3 +
+ arch/m68k/configs/m5485evb_defconfig  |   79 +++++-
+ arch/m68k/mm/cache.c                  |    4 +-
+ arch/m68k/mm/cf-mmu.c                 |   28 ++-
+ arch/m68k/mm/memory.c                 |    8 +-
+ drivers/net/fec/fec.c                 |   20 +-
+ include/asm-m68k/bootinfo.h           |   59 +++-
+ include/asm-m68k/cf_cacheflush.h      |  547 +++++++++++----------------------
+ include/asm-m68k/cf_pgalloc.h         |    5 +-
+ include/asm-m68k/cf_pgtable.h         |    2 +-
+ include/asm-m68k/cfcache.h            |    6 +
+ include/asm-m68k/page.h               |    8 +
+ include/asm-m68k/page_offset.h        |   25 +-
+ 19 files changed, 446 insertions(+), 525 deletions(-)
+
+--- a/arch/m68k/coldfire/config.c
++++ b/arch/m68k/coldfire/config.c
+@@ -23,7 +23,6 @@
+ #include <asm/coldfire.h>
+ #include <asm/cfcache.h>
+ #include <asm/cacheflush.h>
+-#include <asm/bootinfo.h>
+ #include <asm/io.h>
+ #include <asm/cfmmu.h>
+ #include <asm/setup.h>
+@@ -36,7 +35,14 @@
+ 
+ #include <asm/mcfsim.h>
+ 
+-#if 0
++#if defined(CONFIG_M54455)
++#define UBOOT_EXTRA_CLOCKS
++#elif defined(CONFIG_M547X_8X)
++#define UBOOT_PCI
++#endif
++#include <asm/bootinfo.h>
++
++#ifdef CONFIG_M54455
+ #include <asm/mcf5445x_intc.h>
+ #include <asm/mcf5445x_sdramc.h>
+ #include <asm/mcf5445x_fbcs.h>
+@@ -44,10 +50,6 @@
+ #include <asm/mcf5445x_xbs.h>
+ #endif
+ 
+-/* JKM -- testing */
+-#include <linux/pfn.h>
+-/* JKM */
+-
+ extern int get_irq_list(struct seq_file *p, void *v);
+ extern char _text, _end;
+ extern char _etext, _edata, __init_begin, __init_end;
+@@ -58,6 +60,10 @@ extern unsigned long availmem;
+ static int irq_enable[NR_IRQS];
+ unsigned long num_pages;
+ 
++/* ethernet mac addresses from uboot */
++unsigned char uboot_enet0[6];
++unsigned char uboot_enet1[6];
++
+ void coldfire_sort_memrec(void)
+ {
+ 	int i, j;
+@@ -87,6 +93,9 @@ void coldfire_sort_memrec(void)
+ 	}
+ }
+ 
++/*
++ * UBoot Handler
++ */
+ int __init uboot_commandline(char *bootargs)
+ {
+ 	int len = 0, cmd_line_len;
+@@ -101,12 +110,17 @@ int __init uboot_commandline(char *boota
+ 		return 0;
+ 
+ 	/* Add offset to get post-remapped kernel memory location */
+-	uboot_info.bd_info = (*(u32 *)(uboot_info_stk)) + offset;
++	uboot_info.bdi = (struct bd_info *)((*(u32 *)(uboot_info_stk)) + offset);
+ 	uboot_info.initrd_start = (*(u32 *)(uboot_info_stk+4)) + offset;
+ 	uboot_info.initrd_end = (*(u32 *)(uboot_info_stk+8)) + offset;
+ 	uboot_info.cmd_line_start = (*(u32 *)(uboot_info_stk+12)) + offset;
+ 	uboot_info.cmd_line_stop = (*(u32 *)(uboot_info_stk+16)) + offset;
+ 
++	/* copy over mac addresses */
++	memcpy(uboot_enet0, uboot_info.bdi->bi_enet0addr, 6);
++	memcpy(uboot_enet1, uboot_info.bdi->bi_enet1addr, 6);
++
++	/* copy command line */
+ 	cmd_line_len = uboot_info.cmd_line_stop - uboot_info.cmd_line_start;
+ 	if ((cmd_line_len > 0) && (cmd_line_len < CL_SIZE-1))
+ 		len = (int)strncpy(bootargs, (char *)uboot_info.cmd_line_start,\
+@@ -121,7 +135,7 @@ int __init uboot_commandline(char *boota
+ #if defined(CONFIG_M54455)
+ #define DEFAULT_COMMAND_LINE "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
+ #elif defined(CONFIG_M547X_8X)
+-#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs nfsroot=172.27.155.1:/tftpboot/rigo/rootfs/ ip=172.27.155.85:172.27.155.1"
++#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/rigo/rootfs/ ip=172.27.155.85:172.27.155.1"
+ #endif
+ asmlinkage void __init cf_early_init(void)
+ {
+@@ -142,7 +156,6 @@ asmlinkage void __init cf_early_init(voi
+ 	MCF_INTC1_IMRL = 0xFFFFFFFF;
+ 	MCF_INTC1_IMRH = 0xFFFFFFFF;
+ #elif defined(CONFIG_M547X_8X)
+-/* JKM -- ?? */
+ 	MCF_IMRL = 0xFFFFFFFF;
+ 	MCF_IMRH = 0xFFFFFFFF;
+ #endif
+@@ -170,7 +183,6 @@ asmlinkage void __init cf_early_init(voi
+ 			MCF_XBS_PRS_M6(MCF_XBS_PRI_1) |
+ 			MCF_XBS_PRS_M7(MCF_XBS_PRI_7));
+ #endif
+-	
+ 
+ 	m68k_machtype = MACH_CFMMU;
+ 	m68k_fputype = FPU_CFV4E;
+@@ -181,7 +193,6 @@ asmlinkage void __init cf_early_init(voi
+ 	m68k_memory[m68k_num_memory].addr = CONFIG_SDRAM_BASE;
+ 	m68k_memory[m68k_num_memory++].size = CONFIG_SDRAM_SIZE;
+ 
+-#if defined(CONFIG_M54455)
+ 	if (!uboot_commandline(m68k_command_line)) {
+ #if defined(CONFIG_BOOTPARAM)
+ 		strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE-1);
+@@ -189,11 +200,6 @@ asmlinkage void __init cf_early_init(voi
+ 		strcpy(m68k_command_line, DEFAULT_COMMAND_LINE);
+ #endif
+ 	}
+-#else
+-/* JKM -- hack until mappings get resolved */
+-	strcpy(m68k_command_line, DEFAULT_COMMAND_LINE);
+-#endif
+-
+ 
+ #if defined(CONFIG_BLK_DEV_INITRD)
+ 	/* add initrd image */
+@@ -372,75 +378,11 @@ void coldfire_reboot(void)
+ #endif
+ }
+ 
+-/* int coldfire_hwclk(int i, struct rtc_time *t)
+-{
+-	printk ("Real time clock needs porting.\n");
+-	return 0;
+-}*/
+-
+ static void coldfire_get_model(char *model)
+ {
+ 	sprintf(model, "Version 4 ColdFire");
+ }
+ 
+-/* JKM -- Why do we need these? */
+-void coldfire_enable_irq(unsigned int vec)
+-{
+-	unsigned long flags;
+-
+-	vec -= 64;
+-
+-	if (((int)vec < 0) || (vec > 63)) {
+-		printk(KERN_WARNING "enable_irq %d failed\n", vec);
+-		return;
+-	}
+-
+-	local_irq_save(flags);
+-	irq_enable[vec]++;
+-#if defined(CONFIG_M54455)
+-	if (vec < 32)
+-		MCF_INTC0_IMRL &= ~(1 << vec);
+-	else
+-		MCF_INTC0_IMRH &= ~(1 << (vec - 32));
+-#elif defined(CONFIG_M547X_8X)
+-	if (vec < 32)
+-		MCF_IMRL &= ~(1 << vec);
+-	else
+-		MCF_IMRH &= ~(1 << (vec - 32));
+-#endif
+-	local_irq_restore(flags);
+-}
+-
+-/* JKM -- Why do we need these? */
+-void coldfire_disable_irq(unsigned int vec)
+-{
+-	unsigned long flags;
+-
+-	vec -= 64;
+-
+-	if (((int)vec < 0) || (vec > 63)) {
+-		printk(KERN_WARNING "disable_irq %d failed\n", vec);
+-		return;
+-	}
+-
+-	local_irq_save(flags);
+-	if (--irq_enable[vec] == 0) {
+-#if defined(CONFIG_M54455)
+-		if (vec < 32)
+-			MCF_INTC0_IMRL |= (1 << vec);
+-		else
+-			MCF_INTC0_IMRH |= (1 << (vec - 32));
+-#elif defined(CONFIG_M547X_8X)
+-		if (vec < 32)
+-			MCF_IMRL |= (1 << vec);
+-		else
+-			MCF_IMRH |= (1 << (vec - 32));
+-#endif
+-
+-	}
+-	local_irq_restore(flags);
+-}
+-
+ static void __init
+ coldfire_bootmem_alloc(unsigned long memory_start, unsigned long memory_end)
+ {
+--- a/arch/m68k/coldfire/dma.c
++++ b/arch/m68k/coldfire/dma.c
+@@ -516,13 +516,8 @@ dma_init()
+ 	MCF_DMA_DIPR = 0xFFFFFFFF;
+ 
+ 	MCF_ICR(ISC_DMA) = ILP_DMA;
+-#if 0
+-// JKM
+-	enable_irq( 64 + ISC_DMA );
+-#endif
+ 
+-	result =
+-	    MCD_initDma((dmaRegs *) (MCF_MBAR + 0x8000),
++	result = MCD_initDma((dmaRegs *) (MCF_MBAR + 0x8000),
+ 			(void *) SYS_SRAM_DMA_START, MCD_RELOC_TASKS);
+ 	if (result != MCD_OK) {
+ 		printk("Cannot perform DMA initialization\n");
+--- a/arch/m68k/coldfire/entry.S
++++ b/arch/m68k/coldfire/entry.S
+@@ -10,6 +10,8 @@
+  *  Kurt Mahan kmahan@freescale.com
+  *  Copyright Freescale Semiconductor, Inc. 2007
+  *
++ *  Modify irq status in buserr -- (c) Copyright 2008, SYSTEM electronic Gmbh
++ *
+  * Based on:
+  *
+  *  arch/m68knommu/platform/5307/entry.S &
+@@ -77,7 +79,15 @@ sw_usp:
+ .globl inthandler
+ 
+ ENTRY(buserr)
++#ifdef CONFIG_COLDFIRE_FOO
++	movew	#0x2700,%sr		/* lock interrupts */
++#endif
+ 	SAVE_ALL_INT
++#ifdef	CONFIG_COLDFIRE_FOO
++	movew	PT_SR(%sp),%d3		/* get original %sr */
++	oril	#0x2000,%d3		/* set supervisor mode in it */
++	movew	%d3,%sr			/* recover irq state */
++#endif
+ 	GET_CURRENT(%d0)
+ 	movel   %sp,%sp@-		/* stack frame pointer argument */
+ 	jsr     buserr_c
+--- a/arch/m68k/coldfire/head.S
++++ b/arch/m68k/coldfire/head.S
+@@ -5,6 +5,7 @@
+  *    Matt Waddel Matt.Waddel@freescale.com
+  *    Kurt Mahan kmahan@freescale.com
+  *  Copyright Freescale Semiconductor, Inc. 2007, 2008
++ *  Phys kernel mapping Copyright Daniel Krueger, SYSTEC electornic GmbH 2008
+  *
+  *  This program is free software; you can redistribute it and/or modify
+  *  it under the terms of the GNU General Public License as published by
+@@ -52,7 +53,7 @@
+ #define __FINIT		.previous
+ #endif
+ 
+-/* JKM -- REVISE DOCS FOR RIGO */
++/* JKM -- REVISE DOCS FOR RIGO and PHYS MAPPING */
+ /*
+  * Setup ACR mappings to provide the following memory map:
+  *   Data
+@@ -62,10 +63,17 @@
+  *     None currently (mapped via TLBs)
+  */
+ 
++#if CONFIG_SDRAM_BASE != PAGE_BASE
+ #if defined(CONFIG_M54455)
++#if 0
+ #define ACR0_DEFAULT	#0xA00FA048   /* ACR0 default value */
++#endif
++#define ACR0_DEFAULT	#0x400FA028   /* ACR0 default value */
+ #define ACR1_DEFAULT	#0xF00FA040   /* ACR1 default value */
++#if 0
+ #define ACR2_DEFAULT	#0x00000000   /* ACR2 default value */
++#endif
++#define ACR2_DEFAULT	#0x400FA028   /* ACR2 default value */
+ #define ACR3_DEFAULT	#0x00000000   /* ACR3 default value */
+ /* ACR mapping for FPGA (maps 0) */
+ #define ACR0_FPGA	#0x000FA048   /* ACR0 enable FPGA */
+@@ -76,6 +84,16 @@
+ #define ACR3_DEFAULT	#0x00000000   /* ACR3 default value */
+ #endif
+ 
++#else
++#if defined(CONFIG_M54455)
++#elif defined(CONFIG_M547X_8X)
++#define ACR0_DEFAULT	#0xE000C040   /* ACR0 default value */
++#define ACR1_DEFAULT	#0x000FA008   /* ACR1 default value */
++#define ACR2_DEFAULT	#0x00000000   /* ACR2 default value */
++#define ACR3_DEFAULT	#0x000FA008   /* ACR3 default value */
++#endif
++#endif
++
+ 
+ /* Several macros to make the writing of subroutines easier:
+  * - func_start marks the beginning of the routine which setups the frame
+@@ -153,6 +171,7 @@ func_define	putn,1
+ #endif
+ .endm
+ 
++#if CONFIG_SDRAM_BASE != PAGE_OFFSET
+ /*
+ 	mmu_map  -  creates a new TLB entry
+ 
+@@ -222,6 +241,7 @@ func_define	putn,1
+ 	movew	\temp_data_reg, (MMUOR)
+ 1:	
+ .endm	/* mmu_unmap */
++#endif /* CONFIG_SDRAM_BASE != PAGE_OFFSET */
+ 
+ /* .text */
+ .section ".text.head","ax"
+@@ -235,7 +255,11 @@ ENTRY(_stext)
+ 
+ 	.long	BOOTINFOV_MAGIC
+ 	.long	0
++#if CONFIG_SDRAM_BASE != PAGE_OFFSET
+ 1:	jmp	__start-(0xc0000000-CONFIG_SDRAM_BASE)
++#else
++1:	jmp	__start
++#endif
+ 
+ .equ	kernel_pg_dir,_stext
+ .equ	.,_stext+0x1000
+@@ -244,24 +268,13 @@ ENTRY(_start)
+ 	jra	__start
+ __INIT
+ ENTRY(__start)
+-
+-/* JKM -- make sure Rigo handles UBOOT */
+ /* Save the location of u-boot info - cmd line, bd_info, etc. */
+ 	movel	%a7,%a4		/* Don't use %a4 before cf_early_init */
+-/* JKM -- fix to use CONFIG_SDRAM_BASE) */
+-#if defined(CONFIG_M54455)
+-	addl	#0x80000004,%a4	/* 0x80000004= 1 stack push + high mem offset */
+-#elif defined(CONFIG_M547X_8X)
+-	addl	#0xc0000004,%a4	/* 0x80000004= 1 stack push + high mem offset */
+-#endif
++	addl	#0x00000004,%a4	/* offset past top */
++	addl	#(PAGE_OFFSET-CONFIG_SDRAM_BASE),%a4	/* high mem offset */
+ 
+-/* JKM -- fix this to work off of CONFIG_SDRAM_BASE */
+ /* Setup initial stack pointer */
+-#if defined(CONFIG_M54455)
+-	movel	#0x40001000,%sp	
+-#elif defined(CONFIG_M547X_8X)
+-	movel	#0x00001000,%sp	
+-#endif
++	movel	#CONFIG_SDRAM_BASE+0x1000,%sp
+ 
+ /* Setup usp */
+ 	subl	%a0,%a0
+@@ -297,16 +310,21 @@ ENTRY(__start)
+ /* setup ACRs */
+ 	movel	ACR0_DEFAULT, %d0  		/* ACR0 (DATA) setup */
+ 	movec   %d0, %acr0
++	nop
+ 	movel	ACR1_DEFAULT, %d0  		/* ACR1 (DATA) setup */
+ 	movec   %d0, %acr1
++	nop
+ 	movel	ACR2_DEFAULT, %d0  		/* ACR2 (CODE) setup */
+ 	movec   %d0, %acr2
++	nop
+ 	movel	ACR3_DEFAULT, %d0  		/* ACR3 (CODE) setup */
+ 	movec   %d0, %acr3
++	nop
+ 
+ 	/* If you change the memory size to another value make a matching 
+ 	   change in paging_init(cf-mmu.c) to zones_size[]. */
+ 
++#if CONFIG_SDRAM_BASE != PAGE_OFFSET
+ #if defined(CONFIG_M54455)
+ 	/* Map 256MB as code */
+ 	mmu_map	(PAGE_OFFSET+0*0x1000000),  (PHYS_OFFSET+0*0x1000000), \
+@@ -511,6 +529,7 @@ ENTRY(__start)
+ 		MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \
+ 		MMUDR_W, 0, 0, %d0
+ #endif
++#endif /* CONFIG_SDRAM_BASE != PAGE_OFFSET */
+ 
+ 	/* Turn on MMU */
+ 	movel	#(MMUCR_EN),%a0
+@@ -531,6 +550,7 @@ ENTRY(__running_high)
+ 	movel	%a1,%a0@
+ 
+ 	/* Unmap unity mappings */
++#if CONFIG_SDRAM_BASE != PAGE_OFFSET
+ #if defined(CONFIG_M54455)
+ 	mmu_unmap (PHYS_OFFSET+0*0x1000000), MMUOR_ITLB, %d0
+ 	mmu_unmap (PHYS_OFFSET+0*0x1000000), 0, %d0
+@@ -544,6 +564,7 @@ ENTRY(__running_high)
+ 	mmu_unmap (PHYS_OFFSET+2*0x1000000), 0, %d0
+ 	mmu_unmap (PHYS_OFFSET+3*0x1000000), 0, %d0
+ #endif
++#endif /* CONFIG_SDRAM_BASE != PAGE_OFFSET */
+ 
+ /* Setup initial stack pointer */
+ 	lea	init_task,%a2 
+@@ -574,6 +595,7 @@ func_return	set_context
+  * Map in 0x00000000 -> 0x0fffffff and then do the write.
+  */
+ set_fpga:
++#if 0
+ 	movew	%sr,%d1
+ 	movew	#0x2700,%sr
+ 	movel	ACR0_FPGA, %d0
+@@ -585,6 +607,7 @@ set_fpga:
+ 	movec   %d0, %acr0
+ 	nop
+ 	movew	%d1,%sr
++#endif
+ 	rts
+ #endif
+ 
+--- a/arch/m68k/coldfire/mcf5445x-devices.c
++++ b/arch/m68k/coldfire/mcf5445x-devices.c
+@@ -127,7 +127,9 @@ static inline void mcf5445x_init_pata(vo
+ static int __init mcf5445x_init_devices(void)
+ {
+ 	printk(KERN_INFO "MCF5445x INIT_DEVICES\n");
++#if 0
+ 	mcf5445x_init_pata();
++#endif
+ 
+ 	return 0;
+ }
+--- a/arch/m68k/coldfire/mcf5445x-pci.c
++++ b/arch/m68k/coldfire/mcf5445x-pci.c
+@@ -236,6 +236,8 @@ mcf5445x_pci_arb_interrupt(int irq, void
+ int __init
+ init_mcf5445x_pci(void)
+ {
++	return 0;
++#if 0
+ 	/*
+ 	 * Initialize the PCI core
+ 	 */
+@@ -331,6 +333,7 @@ init_mcf5445x_pci(void)
+ 	raw_pci_ops = &mcf5445x_pci_ops;
+ 
+ 	return 0;
++#endif
+ }
+ 
+ /*
+--- a/arch/m68k/coldfire/signal.c
++++ b/arch/m68k/coldfire/signal.c
+@@ -608,7 +608,10 @@ static inline int rt_setup_ucontext(stru
+ 
+ static inline void push_cache(unsigned long vaddr)
+ {
++#if 0 
++// JKM -- need to add into the old cpushl cache stuff
+ 	cf_cache_push(__pa(vaddr), 8);
++#endif
+ }
+ 
+ static inline void __user *
+--- a/arch/m68k/configs/m5485evb_defconfig
++++ b/arch/m68k/configs/m5485evb_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+ # Linux kernel version: 2.6.24
+-# Thu Feb 21 00:19:01 2008
++# Wed Mar  5 16:05:25 2008
+ #
+ CONFIG_M68K=y
+ CONFIG_MMU=y
+@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
+ # CONFIG_SUN3 is not set
+ CONFIG_COLDFIRE=y
+ CONFIG_CFV4E=y
++CONFIG_MCD_DMA=y
+ # CONFIG_AMIGA is not set
+ # CONFIG_ATARI is not set
+ # CONFIG_MAC is not set
+@@ -135,7 +136,7 @@ CONFIG_M5485CFE=y
+ # CONFIG_M5485DFE is not set
+ # CONFIG_M5485EFE is not set
+ # CONFIG_M5485FFE is not set
+-CONFIG_MCFCLK=50000000
++CONFIG_MCFCLK=200000000
+ # CONFIG_MCF_USER_HALT is not set
+ CONFIG_MMU_CFV4E=y
+ CONFIG_SDRAM_BASE=0x00000000
+@@ -279,7 +280,73 @@ CONFIG_FW_LOADER=y
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+ # CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++# CONFIG_MTD_CHAR is not set
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=y
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
+ # CONFIG_PARPORT is not set
+ CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+@@ -347,6 +414,9 @@ CONFIG_NETDEVICES=y
+ # CONFIG_PHYLIB is not set
+ CONFIG_NET_ETHERNET=y
+ CONFIG_MII=y
++CONFIG_FEC_548x=y
++CONFIG_FEC_548x_AUTO_NEGOTIATION=y
++# CONFIG_FEC_548x_ENABLE_FEC2 is not set
+ # CONFIG_IBM_NEW_EMAC_ZMII is not set
+ # CONFIG_IBM_NEW_EMAC_RGMII is not set
+ # CONFIG_IBM_NEW_EMAC_TAH is not set
+@@ -530,7 +600,7 @@ CONFIG_FS_MBCACHE=y
+ # CONFIG_GFS2_FS is not set
+ # CONFIG_OCFS2_FS is not set
+ CONFIG_MINIX_FS=y
+-# CONFIG_ROMFS_FS is not set
++CONFIG_ROMFS_FS=y
+ # CONFIG_INOTIFY is not set
+ # CONFIG_QUOTA is not set
+ CONFIG_DNOTIFY=y
+@@ -578,6 +648,7 @@ CONFIG_TMPFS=y
+ # CONFIG_BEFS_FS is not set
+ # CONFIG_BFS_FS is not set
+ # CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
+ # CONFIG_CRAMFS is not set
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_HPFS_FS is not set
+--- a/arch/m68k/mm/cache.c
++++ b/arch/m68k/mm/cache.c
+@@ -81,7 +81,9 @@ static unsigned long virt_to_phys_slow(u
+ void flush_icache_range(unsigned long address, unsigned long endaddr)
+ {
+ #ifdef CONFIG_COLDFIRE
+-	cf_icache_flush_range(address, endaddr);
++// JKM -- hack until new cpushl stuff is in
++//	cf_icache_flush_range(address, endaddr);
++	flush_icache();
+ #else /* !CONFIG_COLDFIRE */
+ 
+ 	if (CPU_IS_040_OR_060) {
+--- a/arch/m68k/mm/cf-mmu.c
++++ b/arch/m68k/mm/cf-mmu.c
+@@ -35,6 +35,12 @@
+ #include <asm/coldfire.h>
+ #include <asm/tlbflush.h>
+ 
++#if PAGE_OFFSET == CONFIG_SDRAM_BASE
++#define	KERNRAM(x) ((x >= PAGE_OFFSET) && (x < (PAGE_OFFSET + CONFIG_SDRAM_SIZE)))
++#else
++#define	KERNRAM(x) (x >= PAGE_OFFSET)
++#endif
++
+ mm_context_t next_mmu_context;
+ unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
+ 
+@@ -53,10 +59,16 @@ extern char __init_begin, __init_end;
+ 
+ void free_initmem(void)
+ {
++#if 0
+ 	unsigned long addr;
+ 	unsigned long start = (unsigned long)&__init_begin;
+ 	unsigned long end = (unsigned long)&__init_end;
+ 
++/* 
++ * JKM -- revisit -- the latest round of vmlinux.lds changes has caused
++ * a little grief with how init areas are handled.  With the new toolchain
++ * release I'll fix this.
++ */
+ 	printk(KERN_INFO "free_initmem: __init_begin = 0x%lx  __init_end = 0x%lx\n", start, end);
+ 
+ 	addr = (unsigned long)&__init_begin;
+@@ -67,6 +79,7 @@ void free_initmem(void)
+ 		free_page(addr);
+ 		totalram_pages++;
+ 	}
++#endif
+ }
+ 
+ /* Coldfire paging_init derived from sun3 */
+@@ -149,8 +162,8 @@ int cf_tlb_miss(struct pt_regs *regs, in
+ 	mmuar = ( dtlb ) ? regs->mmuar
+ 			 : regs->pc + (extension_word * sizeof(long));
+ 
+-        mm = (!user_mode(regs) && (mmuar >= PAGE_OFFSET)) ? &init_mm
+-							  : current->mm;
++        mm = (!user_mode(regs) && KERNRAM(mmuar)) ? &init_mm : current->mm;
++
+         if (!mm) {
+ 	    local_irq_restore(flags);
+ 	    return (-1);
+@@ -167,9 +180,9 @@ int cf_tlb_miss(struct pt_regs *regs, in
+ 	    local_irq_restore(flags);
+ 	    return (-1);
+ 	}	
+-    	
+-	pte = (mmuar >= PAGE_OFFSET) ? pte_offset_kernel(pmd, mmuar)
+-	                             : pte_offset_map(pmd, mmuar);
++    
++	pte = (KERNRAM(mmuar)) ? pte_offset_kernel(pmd, mmuar)
++	                       : pte_offset_map(pmd, mmuar);
+     	if (pte_none(*pte) || !pte_present(*pte)) {
+ 	    local_irq_restore(flags);
+ 	    return (-1);		
+@@ -185,7 +198,7 @@ int cf_tlb_miss(struct pt_regs *regs, in
+ 	
+         set_pte(pte, pte_mkyoung(*pte));
+         asid = mm->context & 0xff;
+-        if (!pte_dirty(*pte) && mmuar<=PAGE_OFFSET)
++        if (!pte_dirty(*pte) && !KERNRAM(mmuar))
+     	    set_pte(pte, pte_wrprotect(*pte));
+ 
+         *MMUTR = (mmuar & PAGE_MASK) | (asid << CF_ASID_MMU_SHIFT)
+@@ -201,7 +214,8 @@ int cf_tlb_miss(struct pt_regs *regs, in
+ 	else
+ 	    *MMUOR = MMUOR_ITLB | MMUOR_ACC | MMUOR_UAA;
+ 
+-	asm ("nop");
++	asm("nop");
++
+ 	/*printk("cf_tlb_miss: va=%lx, pa=%lx\n", (mmuar & PAGE_MASK), 
+ 		  (pte_val(*pte)  & PAGE_MASK));*/
+ 	local_irq_restore(flags);
+--- a/arch/m68k/mm/memory.c
++++ b/arch/m68k/mm/memory.c
+@@ -206,7 +206,9 @@ static inline void pushcl040(unsigned lo
+ void cache_clear (unsigned long paddr, int len)
+ {
+ #ifdef CONFIG_COLDFIRE
+-	cf_cache_clear(paddr, len);
++// JKM -- revise to use proper caching
++//	cf_cache_clear(paddr, len);
++	flush_bcache();
+ #else
+     if (CPU_IS_040_OR_060) {
+ 	int tmp;
+@@ -257,7 +259,9 @@ EXPORT_SYMBOL(cache_clear);
+ void cache_push (unsigned long paddr, int len)
+ {
+ #ifdef CONFIG_COLDFIRE
+-	cf_cache_push(paddr, len);
++// JKM -- revise to use proper caching
++//	cf_cache_push(paddr, len);
++	flush_bcache();
+ #else
+     if (CPU_IS_040_OR_060) {
+ 	int tmp = PAGE_SIZE;
+--- a/drivers/net/fec/fec.c
++++ b/drivers/net/fec/fec.c
+@@ -99,6 +99,9 @@ unsigned char fec_mac_addr_fec0[6] = { 0
+ unsigned char fec_mac_addr_fec1[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x51 };	// Default address of FEC1
+ #endif
+ 
++extern unsigned char uboot_enet0[];
++extern unsigned char uboot_enet1[];
++
+ #ifndef MODULE
+ int fec_str_to_mac( char *str_mac, unsigned char* addr);
+ int __init fec_mac_setup0 (char *s);
+@@ -175,6 +178,12 @@ printk(KERN_INFO "FEI: index=%d\n", inde
+ printk(KERN_INFO "FEI: txdesc=0x%p  rxdesc=0x%p\n", fp->fecpriv_txdesc, fp->fecpriv_rxdesc);
+ 
+ 		/* mac addr */
++		if (uboot_enet0[0] || uboot_enet0[1] || uboot_enet0[2] ||
++		    uboot_enet0[3] || uboot_enet0[4] || uboot_enet0[5]) {
++			/* use uboot enet 0 addr */
++			memcpy(fec_mac_addr_fec0, uboot_enet0, 6);
++		}
++
+ 		fp->fecpriv_mac_addr = fec_mac_addr_fec0;
+ 	}
+ 	else {
+@@ -211,6 +220,11 @@ printk(KERN_INFO "FEI: txdesc=0x%p  rxde
+ 		fp->fecpriv_rxdesc = (void*)FEC_RX_DESC_FEC1;
+ 
+ 		/* mac addr */
++		if (uboot_enet1[0] || uboot_enet1[1] || uboot_enet1[2] ||
++		    uboot_enet1[3] || uboot_enet1[4] || uboot_enet1[5]) {
++			/* use uboot enet 1 addr */
++			memcpy(fec_mac_addr_fec1, uboot_enet1, 6);
++		}
+ 		fp->fecpriv_mac_addr = fec_mac_addr_fec1;
+ #endif
+ 	}
+@@ -762,7 +776,6 @@ int fec_tx(struct sk_buff *skb, struct n
+ 	void *data, *data_aligned;
+ 	int offset;
+ 
+-printk(KERN_INFO "fec_tx\n");
+ 	data = kmalloc(skb->len + 15, GFP_DMA | GFP_ATOMIC);
+ 
+ 	if (!data)
+@@ -820,7 +833,6 @@ void fec_tx_timeout(struct net_device *d
+ 	struct fec_priv *fp = netdev_priv(dev);
+ 	unsigned long base_addr = (unsigned long) dev->base_addr;
+ 
+-printk(KERN_INFO "fec_tx_timeout\n");
+ 	spin_lock_irq(&fp->fecpriv_lock);
+ 	MCD_killDma(fp->fecpriv_fec_tx_channel);
+ 	for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
+@@ -941,7 +953,6 @@ void fec_interrupt_fec_tx_handler(struct
+ {
+ 	struct fec_priv *fp = netdev_priv(dev);
+ 
+-printk(KERN_INFO "fectxint\n");
+ 	//Release the socket buffer
+ 	if(fp->fecpriv_txbuf[fp->fecpriv_current_tx])
+ 	{
+@@ -977,7 +988,6 @@ void fec_interrupt_fec_rx_handler(struct
+ 	struct fec_priv *fp = netdev_priv(dev);
+ 	struct sk_buff *skb;
+ 
+-printk(KERN_INFO "fecrxint\n");
+ 	fp->fecpriv_rxflag = 1;
+ /*
+ 	// Some buffers can be missed
+@@ -1070,7 +1080,6 @@ irqreturn_t fec_interrupt_handler(int ir
+ 	unsigned long base_addr = (unsigned long) dev->base_addr;
+ 	unsigned long events;
+ 
+-printk(KERN_INFO "fecerrint\n");
+ 	// Read and clear the events
+ 	events = FEC_EIR(base_addr) & FEC_EIMR(base_addr);
+ 
+@@ -1157,7 +1166,6 @@ void fec_interrupt_fec_reinit(unsigned l
+ 	struct fec_priv *fp = netdev_priv(dev);
+ 	unsigned long base_addr = (unsigned long) dev->base_addr;
+ 
+-printk(KERN_INFO "fecreinit\n");
+ 	// Initialize reception descriptors and start DMA for the reception
+ 	for (i = 0; i < FEC_RX_BUF_NUMBER; i++)
+ 	{
+--- a/include/asm-m68k/bootinfo.h
++++ b/include/asm-m68k/bootinfo.h
+@@ -19,11 +19,59 @@
+ **   Redesign of the boot information structure; renamed to bootinfo.h again
+ ** 27/11/96 Geert Uytterhoeven:
+ **   Backwards compatibility with bootinfo interface version 1.0
++** 12/03/08 Kurt Mahan
++**   Copy the bd_info structure from uboot1.3.2/include/asm-m68k/u-boot.h
++**   into this file.  The original author is Wolfgang Denk, 
++**   DENX Software Engineering, wd@denx.de.
+ */
+ 
+ #ifndef _M68K_BOOTINFO_H
+ #define _M68K_BOOTINFO_H
+ 
++#ifndef __ASSEMBLY__
++/*
++ * UBoot Support
++ *
++ * bd_info structure from uboot1.3.2/include/asm-m68k/u-boot.h
++ */
++struct bd_info {
++	unsigned long bi_memstart;	/* start of DRAM memory */
++	unsigned long bi_memsize;	/* size  of DRAM memory in bytes */
++	unsigned long bi_flashstart;	/* start of FLASH memory */
++	unsigned long bi_flashsize;	/* size  of FLASH memory */
++	unsigned long bi_flashoffset;	/* reserved area for startup monitor */
++	unsigned long bi_sramstart;	/* start of SRAM memory */
++	unsigned long bi_sramsize;	/* size  of SRAM memory */
++	unsigned long bi_mbar_base;	/* base of internal registers */
++	unsigned long bi_bootflags;	/* boot / reboot flag (for LynxOS) */
++	unsigned long bi_boot_params;	/* where this board expects params */
++	unsigned long bi_ip_addr;	/* IP Address */
++	unsigned char bi_enet0addr[6];	/* Ethernet 0 mac address */
++	unsigned short bi_ethspeed;	/* Ethernet speed in Mbps */
++	unsigned long bi_intfreq;	/* Internal Freq, in MHz */
++	unsigned long bi_busfreq;	/* Bus Freq, in MHz */
++#ifdef UBOOT_PCI
++	unsigned long bi_pcifreq;	/* pci Freq in MHz */
++#endif
++#ifdef UBOOT_EXTRA_CLOCK
++	unsigned long bi_inpfreq;	/* input Freq in MHz */
++	unsigned long bi_vcofreq;	/* vco Freq in MHz */
++	unsigned long bi_flbfreq;	/* Flexbus Freq in MHz */
++#endif
++	unsigned long bi_baudrate;	/* Console Baudrate */
++	unsigned char bi_enet1addr[6];	/* eth1 mac address */
++	unsigned char bi_enet2addr[6];	/* eth2 mac address */
++	unsigned char bi_enet3addr[6];	/* eth3 mac address */
++};
++
++struct uboot_record {
++	struct bd_info *bdi;
++    	unsigned long initrd_start;
++    	unsigned long initrd_end;
++    	unsigned long cmd_line_start;
++    	unsigned long cmd_line_stop;
++};
++#endif /* __ASSEMBLY__ */
+ 
+     /*
+      *  Bootinfo definitions
+@@ -49,17 +97,6 @@ struct bi_record {
+ #endif /* __ASSEMBLY__ */
+ 
+ 
+-#ifndef __ASSEMBLY__
+-
+-struct uboot_record {
+-    unsigned long bd_info;
+-    unsigned long initrd_start;
+-    unsigned long initrd_end;
+-    unsigned long cmd_line_start;
+-    unsigned long cmd_line_stop;
+-};
+-
+-#endif /* __ASSEMBLY__ */
+ 
+ 
+     /*
+--- a/include/asm-m68k/cf_cacheflush.h
++++ b/include/asm-m68k/cf_cacheflush.h
+@@ -1,335 +1,92 @@
+-/*
+- * include/asm-m68k/cf_cacheflush.h - Coldfire Cache
+- *
+- * Based on include/asm-m68k/cacheflush.h
+- *
+- * Coldfire pieces by:
+- *   Kurt Mahan kmahan@freescale.com
+- *
+- * Copyright Freescale Semiconductor, Inc. 2007
+- *
+- * This program is free software; you can redistribute  it and/or modify it
+- * under  the terms of  the GNU General  Public License as published by the
+- * Free Software Foundation;  either version 2 of the  License, or (at your
+- * option) any later version.
+- */
+ #ifndef M68K_CF_CACHEFLUSH_H
+ #define M68K_CF_CACHEFLUSH_H
+ 
+ #include <asm/cfcache.h>
+-
+ /*
+- * Coldfire Cache Model
+- *
+- * The Coldfire processors use a Harvard architecture cache configured
+- * as four-way set associative.  The cache does not implement bus snooping
+- * so cache coherency with other masters must be maintained in software.
+- *
+- * The cache is managed via the CPUSHL instruction in conjunction with
+- * bits set in the CACR (cache control register).  Currently the code
+- * uses the CPUSHL enhancement which adds the ability to
+- * invalidate/clear/push a cacheline by physical address.  This feature
+- * is designated in the Hardware Configuration Register [D1-CPES].
+- *
+- * CACR Bits:
+- *	DPI[28]		cpushl invalidate disable for d-cache
+- *	IDPI[12]	cpushl invalidate disable for i-cache
+- *	SPA[14]		cpushl search by physical address
+- *	IVO[20]		cpushl invalidate only
+- *
+- * Random Terminology:
+- *  * invalidate = reset the cache line's valid bit
+- *  * push = generate a line-sized store of the data if its contents are marked
+- *	     as modifed (the modified flag is cleared after the store)
+- *  * clear = push + invalidate
+- */
+-
+-/**
+- * flush_icache - Flush all of the instruction cache
+- */
+-static inline void flush_icache(void)
+-{
+-	asm volatile("nop\n"
+-		     "moveq%.l	#0,%%d0\n"
+-		     "moveq%.l	#0,%%d1\n"
+-		     "move%.l	%%d0,%%a0\n"
+-		     "1:\n"
+-		     "cpushl	%%ic,(%%a0)\n"
+-		     "add%.l	#0x0010,%%a0\n"
+-		     "addq%.l	#1,%%d1\n"
+-		     "cmpi%.l	%0,%%d1\n"
+-		     "bne	1b\n"
+-		     "moveq%.l	#0,%%d1\n"
+-		     "addq%.l	#1,%%d0\n"
+-		     "move%.l	%%d0,%%a0\n"
+-		     "cmpi%.l	#4,%%d0\n"
+-		     "bne	1b\n"
+-		     : : "i" (CACHE_SETS)
+-		     : "a0", "d0", "d1");
+-}
+-
+-/**
+- * flush_dcache - Flush all of the data cache
+- */
+-static inline void flush_dcache(void)
+-{
+-	asm volatile("nop\n"
+-		     "moveq%.l	#0,%%d0\n"
+-		     "moveq%.l	#0,%%d1\n"
+-		     "move%.l	%%d0,%%a0\n"
+-		     "1:\n"
+-		     "cpushl	%%dc,(%%a0)\n"
+-		     "add%.l	#0x0010,%%a0\n"
+-		     "addq%.l	#1,%%d1\n"
+-		     "cmpi%.l	%0,%%d1\n"
+-		     "bne	1b\n"
+-		     "moveq%.l	#0,%%d1\n"
+-		     "addq%.l	#1,%%d0\n"
+-		     "move%.l	%%d0,%%a0\n"
+-		     "cmpi%.l	#4,%%d0\n"
+-		     "bne	1b\n"
+-		     : : "i" (CACHE_SETS)
+-		     : "a0", "d0", "d1");
+-}
+-
+-/**
+- * flush_bcache - Flush all of both caches
++ * Cache handling functions
+  */
+-static inline void flush_bcache(void)
+-{
+-	asm volatile("nop\n"
+-		     "moveq%.l	#0,%%d0\n"
+-		     "moveq%.l	#0,%%d1\n"
+-		     "move%.l	%%d0,%%a0\n"
+-		     "1:\n"
+-		     "cpushl	%%bc,(%%a0)\n"
+-		     "add%.l	#0x0010,%%a0\n"
+-		     "addq%.l	#1,%%d1\n"
+-		     "cmpi%.l	%0,%%d1\n"
+-		     "bne	1b\n"
+-		     "moveq%.l	#0,%%d1\n"
+-		     "addq%.l	#1,%%d0\n"
+-		     "move%.l	%%d0,%%a0\n"
+-		     "cmpi%.l	#4,%%d0\n"
+-		     "bne	1b\n"
+-		     : : "i" (CACHE_SETS)
+-		     : "a0", "d0", "d1");
+-}
+ 
+-/**
+- * cf_cache_clear - invalidate cache
+- * @paddr: starting physical address
+- * @len: number of bytes
+- *
+- * Invalidate cache lines starting at paddr for len bytes.
+- * Those lines are not pushed.
+- */
+-static inline void cf_cache_clear(unsigned long paddr, int len)
+-{
+-	/* number of lines */
+-	len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
+-	if (len == 0)
+-		return;
+-
+-	/* align on set boundary */
+-	paddr &= 0xfffffff0;
+-
+-	asm volatile("nop\n"
+-		     "move%.l   %2,%%d0\n"
+-		     "or%.l	%3,%%d0\n"
+-		     "movec	%%d0,%%cacr\n"
+-		     "move%.l	%0,%%a0\n"
+-		     "move%.l	%1,%%d0\n"
+-		     "1:\n"
+-		     "cpushl	%%bc,(%%a0)\n"
+-		     "lea	0x10(%%a0),%%a0\n"
+-		     "subq%.l	#1,%%d0\n"
+-		     "bne%.b	1b\n"
+-		     "movec	%2,%%cacr\n"
+-		     : : "a" (paddr), "r" (len),
+-			 "r" (shadow_cacr),
+-			 "i" (CF_CACR_SPA+CF_CACR_IVO)
+-		     : "a0", "d0");
+-}
+-
+-/**
+- * cf_cache_push - Push dirty cache out with no invalidate
+- * @paddr: starting physical address
+- * @len: number of bytes
+- *
+- * Push the any dirty lines starting at paddr for len bytes.
+- * Those lines are not invalidated.
+- */
+-static inline void cf_cache_push(unsigned long paddr, int len)
+-{
+-	/* number of lines */
+-	len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
+-	if (len == 0)
+-		return;
+-
+-	/* align on set boundary */
+-	paddr &= 0xfffffff0;
+-
+-	asm volatile("nop\n"
+-		     "move%.l   %2,%%d0\n"
+-		     "or%.l	%3,%%d0\n"
+-		     "movec	%%d0,%%cacr\n"
+-		     "move%.l	%0,%%a0\n"
+-		     "move%.l	%1,%%d0\n"
+-		     "1:\n"
+-		     "cpushl	%%bc,(%%a0)\n"
+-		     "lea	0x10(%%a0),%%a0\n"
+-		     "subq%.l	#1,%%d0\n"
+-		     "bne.b	1b\n"
+-		     "movec	%2,%%cacr\n"
+-		     : : "a" (paddr), "r" (len),
+-			 "r" (shadow_cacr),
+-			 "i" (CF_CACR_SPA+CF_CACR_DPI+CF_CACR_IDPI)
+-		     : "a0", "d0");
+-}
++#define flush_icache()						\
++({								\
++  unsigned long set;						\
++  unsigned long start_set;					\
++  unsigned long end_set;					\
++								\
++  start_set = 0;						\
++  end_set = (unsigned long)LAST_DCACHE_ADDR;			\
++    								\
++  for (set = start_set; set <= end_set; set += (0x10 - 3)) {	\
++    asm volatile("cpushl %%ic,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%ic,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%ic,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set));		\
++  }								\
++})
++
++#define flush_dcache()						\
++({								\
++  unsigned long set;						\
++  unsigned long start_set;					\
++  unsigned long end_set;					\
++								\
++  start_set = 0;						\
++  end_set = (unsigned long)LAST_DCACHE_ADDR;			\
++    								\
++  for (set = start_set; set <= end_set; set += (0x10 - 3)) {	\
++    asm volatile("cpushl %%dc,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%dc,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%dc,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%dc,(%0)" : "=a" (set) : "a" (set));		\
++  }								\
++})
++
++#define flush_bcache()						\
++({								\
++  unsigned long set;						\
++  unsigned long start_set;					\
++  unsigned long end_set;					\
++								\
++  start_set = 0;						\
++  end_set = (unsigned long)LAST_DCACHE_ADDR;			\
++    								\
++  for (set = start_set; set <= end_set; set += (0x10 - 3)) {	\
++    asm volatile("cpushl %%bc,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%bc,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%bc,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set));		\
++  }								\
++})
+ 
+-/**
+- * cf_cache_flush - Push dirty cache out and invalidate
+- * @paddr: starting physical address
+- * @len: number of bytes
+- *
+- * Push the any dirty lines starting at paddr for len bytes and
+- * invalidate those lines.
++/*
++ * invalidate the cache for the specified memory range.
++ * It starts at the physical address specified for
++ * the given number of bytes.
+  */
+-static inline void cf_cache_flush(unsigned long paddr, int len)
+-{
+-	/* number of lines */
+-	len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
+-	if (len == 0)
+-		return;
+-
+-	/* align on set boundary */
+-	paddr &= 0xfffffff0;
+-
+-	asm volatile("nop\n"
+-		     "move%.l   %2,%%d0\n"
+-		     "or%.l	%3,%%d0\n"
+-		     "movec	%%d0,%%cacr\n"
+-		     "move%.l	%0,%%a0\n"
+-		     "move%.l	%1,%%d0\n"
+-		     "1:\n"
+-		     "cpushl	%%bc,(%%a0)\n"
+-		     "lea	0x10(%%a0),%%a0\n"
+-		     "subq%.l	#1,%%d0\n"
+-		     "bne.b	1b\n"
+-		     "movec	%2,%%cacr\n"
+-		     : : "a" (paddr), "r" (len),
+-			 "r" (shadow_cacr),
+-			 "i" (CF_CACR_SPA)
+-		     : "a0", "d0");
+-}
+-
+-/**
+- * cf_cache_flush_range - Push dirty data/inst cache in range out and invalidate
+- * @vstart - starting virtual address
+- * @vend: ending virtual address
+- *
+- * Push the any dirty data/instr lines starting at paddr for len bytes and
+- * invalidate those lines.
++extern void cache_clear(unsigned long paddr, int len);
++/*
++ * push any dirty cache in the specified memory range.
++ * It starts at the physical address specified for
++ * the given number of bytes.
+  */
+-static inline void cf_cache_flush_range(unsigned long vstart, unsigned long vend)
+-{
+-	int len;
+-
+-	/* align on set boundary */
+-	vstart &= 0xfffffff0;
+-	vend = PAGE_ALIGN((vend + (CACHE_LINE_SIZE-1))) & 0xfffffff0;
+-	len = vend - vstart;
+-	if (len == 0)
+-		return;
+-	vstart = __pa(vstart);
+-	vend = vstart + len;
+-
+-	asm volatile("nop\n"
+-		     "move%.l   %2,%%d0\n"
+-		     "or%.l	%3,%%d0\n"
+-		     "movec	%%d0,%%cacr\n"
+-		     "move%.l	%0,%%a0\n"
+-		     "move%.l	%1,%%a1\n"
+-		     "1:\n"
+-		     "cpushl	%%bc,(%%a0)\n"
+-		     "lea	0x10(%%a0),%%a0\n"
+-		     "cmpa%.l	%%a0,%%a1\n"
+-		     "bne.b	1b\n"
+-		     "movec	%2,%%cacr\n"
+-		     : /* no return */
+-		     : "a" (vstart), "a" (vend),
+-		       "r" (shadow_cacr),
+-		       "i" (CF_CACR_SPA)
+-		     : "a0", "a1", "d0");
+-}
++extern void cache_push(unsigned long paddr, int len);
+ 
+-/**
+- * cf_dcache_flush_range - Push dirty data cache in range out and invalidate
+- * @vstart - starting virtual address
+- * @vend: ending virtual address
+- *
+- * Push the any dirty data lines starting at paddr for len bytes and
+- * invalidate those lines.
++/*
++ * push and invalidate pages in the specified user virtual
++ * memory range.
+  */
+-static inline void cf_dcache_flush_range(unsigned long vstart, unsigned long vend)
+-{
+-	/* align on set boundary */
+-	vstart &= 0xfffffff0;
+-	vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
+-
+-	asm volatile("nop\n"
+-		     "move%.l   %2,%%d0\n"
+-		     "or%.l	%3,%%d0\n"
+-		     "movec	%%d0,%%cacr\n"
+-		     "move%.l	%0,%%a0\n"
+-		     "move%.l	%1,%%a1\n"
+-		     "1:\n"
+-		     "cpushl	%%dc,(%%a0)\n"
+-		     "lea	0x10(%%a0),%%a0\n"
+-		     "cmpa%.l	%%a0,%%a1\n"
+-		     "bne.b	1b\n"
+-		     "movec	%2,%%cacr\n"
+-		     : /* no return */
+-		     : "a" (__pa(vstart)), "a" (__pa(vend)),
+-		       "r" (shadow_cacr),
+-		       "i" (CF_CACR_SPA)
+-		     : "a0", "a1", "d0");
+-}
++extern void cache_push_v(unsigned long vaddr, int len);
+ 
+-/**
+- * cf_icache_flush_range - Push dirty inst cache in range out and invalidate
+- * @vstart - starting virtual address
+- * @vend: ending virtual address
+- *
+- * Push the any dirty instr lines starting at paddr for len bytes and
+- * invalidate those lines.  This should just be an invalidate since you
+- * shouldn't be able to have dirty instruction cache.
+- */
+-static inline void cf_icache_flush_range(unsigned long vstart, unsigned long vend)
+-{
+-	/* align on set boundary */
+-	vstart &= 0xfffffff0;
+-	vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
+-
+-	asm volatile("nop\n"
+-		     "move%.l   %2,%%d0\n"
+-		     "or%.l	%3,%%d0\n"
+-		     "movec	%%d0,%%cacr\n"
+-		     "move%.l	%0,%%a0\n"
+-		     "move%.l	%1,%%a1\n"
+-		     "1:\n"
+-		     "cpushl	%%ic,(%%a0)\n"
+-		     "lea	0x10(%%a0),%%a0\n"
+-		     "cmpa%.l	%%a0,%%a1\n"
+-		     "bne.b	1b\n"
+-		     "movec	%2,%%cacr\n"
+-		     : /* no return */
+-		     : "a" (__pa(vstart)), "a" (__pa(vend)),
+-		       "r" (shadow_cacr),
+-		       "i" (CF_CACR_SPA)
+-		     : "a0", "a1", "d0");
+-}
++/* This is needed whenever the virtual mapping of the current
++   process changes.  */
+ 
+ /**
+  * flush_cache_mm - Flush an mm_struct
+@@ -343,6 +100,8 @@ static inline void flush_cache_mm(struct
+ 
+ #define flush_cache_dup_mm(mm)	flush_cache_mm(mm)
+ 
++#define flush_cache_all()		flush_bcache()
++
+ /**
+  * flush_cache_range - Flush a cache range
+  * @vma: vma struct
+@@ -356,7 +115,8 @@ static inline void flush_cache_range(str
+ 	unsigned long start, unsigned long end)
+ {
+ 	if (vma->vm_mm == current->mm)
+-		cf_cache_flush_range(start, end);
++		flush_bcache();
++//		cf_cache_flush_range(start, end);
+ }
+ 
+ /**
+@@ -372,76 +132,113 @@ static inline void flush_cache_page(stru
+ 	unsigned long vmaddr, unsigned long pfn)
+ {
+ 	if (vma->vm_mm == current->mm)
+-		cf_cache_flush_range(vmaddr, vmaddr+PAGE_SIZE);
++		flush_bcache();
++//		cf_cache_flush_range(vmaddr, vmaddr+PAGE_SIZE);
+ }
+ 
+-/**
+- * __flush_page_to_ram - Push a page out of the cache
+- * @vaddr: Virtual address at start of page
+- *
+- * Push the page at kernel virtual address *vaddr* and clear
+- * the icache.
+- */
+-static inline void __flush_page_to_ram(void *vaddr)
+-{
+-	asm volatile("nop\n"
+-		     "move%.l   %2,%%d0\n"
+-		     "or%.l	%3,%%d0\n"
+-		     "movec	%%d0,%%cacr\n"
+-		     "move%.l	%0,%%d0\n"
+-		     "and%.l	#0xfffffff0,%%d0\n"
+-		     "move%.l	%%d0,%%a0\n"
+-		     "move%.l	%1,%%d0\n"
+-		     "1:\n"
+-		     "cpushl	%%bc,(%%a0)\n"
+-		     "lea	0x10(%%a0),%%a0\n"
+-		     "subq%.l	#1,%%d0\n"
+-		     "bne.b	1b\n"
+-		     "movec	%2,%%cacr\n"
+-		     : : "a" (__pa(vaddr)), "i" (PAGE_SIZE / CACHE_LINE_SIZE),
+-			 "r" (shadow_cacr), "i" (CF_CACR_SPA)
+-		     : "a0", "d0");
++/* Push the page at kernel virtual address and clear the icache */
++/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
++#define flush_page_to_ram(page) __flush_page_to_ram((void *) page_address(page))
++extern inline void __flush_page_to_ram(void *address)
++{
++  unsigned long set;
++  unsigned long start_set;
++  unsigned long end_set;
++  unsigned long addr = (unsigned long) address;
++
++  addr &= ~(PAGE_SIZE - 1); /* round down to page start address */
++
++  start_set = addr & _ICACHE_SET_MASK;
++  end_set = (addr + PAGE_SIZE-1) & _ICACHE_SET_MASK;
++
++  if (start_set > end_set) {
++    /* from the begining to the lowest address */
++    for (set = 0; set <= end_set; set += (0x10 - 3)) {
++      asm volatile("cpushl %%bc,(%0)\n"
++                   "\taddq%.l #1,%0\n"
++                   "\tcpushl %%bc,(%0)\n"
++                   "\taddq%.l #1,%0\n"
++                   "\tcpushl %%bc,(%0)\n"
++                   "\taddq%.l #1,%0\n"
++                   "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set));
++    }
++    /* next loop will finish the cache ie pass the hole */
++    end_set = LAST_ICACHE_ADDR;    
++  }
++  for (set = start_set; set <= end_set; set += (0x10 - 3)) {
++    asm volatile("cpushl %%bc,(%0)\n"
++                 "\taddq%.l #1,%0\n"
++                 "\tcpushl %%bc,(%0)\n"
++                 "\taddq%.l #1,%0\n"
++                 "\tcpushl %%bc,(%0)\n"
++                 "\taddq%.l #1,%0\n"
++                 "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set));
++  }
++}
++
++/* Use __flush_page_to_ram() for flush_dcache_page all values are same - MW */
++#define flush_dcache_page(page)			\
++	__flush_page_to_ram((void *) page_address(page))
++#define flush_icache_page(vma,pg)		\
++	__flush_page_to_ram((void *) page_address(pg))
++#define flush_icache_user_range(adr,len)	do { } while (0)
++/* NL */
++#define flush_icache_user_page(vma,page,addr,len)	do { } while (0)
++
++/* Push n pages at kernel virtual address and clear the icache */
++/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
++extern inline void flush_icache_range (unsigned long address,
++				       unsigned long endaddr)
++{
++  unsigned long set;
++  unsigned long start_set;
++  unsigned long end_set;
++
++  start_set = address & _ICACHE_SET_MASK;
++  end_set = endaddr & _ICACHE_SET_MASK;
++
++  if (start_set > end_set) {
++    /* from the begining to the lowest address */
++    for (set = 0; set <= end_set; set += (0x10 - 3)) {
++      asm volatile("cpushl %%ic,(%0)\n"
++                   "\taddq%.l #1,%0\n"
++                   "\tcpushl %%ic,(%0)\n"
++                   "\taddq%.l #1,%0\n"
++                   "\tcpushl %%ic,(%0)\n"
++                   "\taddq%.l #1,%0\n"
++                   "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set));
++    }
++    /* next loop will finish the cache ie pass the hole */
++    end_set = LAST_ICACHE_ADDR;    
++  }
++  for (set = start_set; set <= end_set; set += (0x10 - 3)) {
++    asm volatile("cpushl %%ic,(%0)\n"
++                 "\taddq%.l #1,%0\n"
++                 "\tcpushl %%ic,(%0)\n"
++                 "\taddq%.l #1,%0\n"
++                 "\tcpushl %%ic,(%0)\n"
++                 "\taddq%.l #1,%0\n"
++                 "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set));
++  }
+ }
+ 
+-/*
+- * Various defines for the kernel.
+- */
+-
+-extern void cache_clear(unsigned long paddr, int len);
+-extern void cache_push(unsigned long paddr, int len);
+-extern void flush_icache_range(unsigned long address, unsigned long endaddr);
+-
+-#define flush_cache_all()			flush_bcache()
+-#define flush_cache_vmap(start, end)		flush_bcache()
+-#define flush_cache_vunmap(start, end)		flush_bcache()
+-
+-#define flush_dcache_range(vstart, vend)	cf_dcache_flush_range(vstart, vend)
+-#define flush_dcache_page(page)			__flush_page_to_ram(page_address(page))
+-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+-
+-#define flush_icache_page(vma, page)		__flush_page_to_ram(page_address(page))
+-
+-/**
+- * copy_to_user_page - Copy memory to user page
+- */
+ static inline void copy_to_user_page(struct vm_area_struct *vma,
+ 				     struct page *page, unsigned long vaddr,
+ 				     void *dst, void *src, int len)
+ {
+ 	memcpy(dst, src, len);
+-	cf_cache_flush(page_to_phys(page), PAGE_SIZE);
++	flush_icache_user_page(vma, page, vaddr, len);
+ }
+-
+-/**
+- * copy_from_user_page - Copy memory from user page
+- */
+ static inline void copy_from_user_page(struct vm_area_struct *vma,
+ 				       struct page *page, unsigned long vaddr,
+ 				       void *dst, void *src, int len)
+ {
+-	cf_cache_flush(page_to_phys(page), PAGE_SIZE);
+ 	memcpy(dst, src, len);
+ }
+ 
++#define flush_cache_vmap(start, end)		flush_cache_all()
++#define flush_cache_vunmap(start, end)		flush_cache_all()
++#define flush_dcache_mmap_lock(mapping)		do { } while (0)
++#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
++
+ #endif /* M68K_CF_CACHEFLUSH_H */
+--- a/include/asm-m68k/cf_pgalloc.h
++++ b/include/asm-m68k/cf_pgalloc.h
+@@ -1,13 +1,9 @@
+ #ifndef M68K_CF_PGALLOC_H
+ #define M68K_CF_PGALLOC_H
+ 
+-/* JKM -- added -- needed? */
+-#include <linux/highmem.h>
+-
+ #include <asm/coldfire.h>
+ #include <asm/page.h>
+ #include <asm/cf_tlbflush.h>
+-/* JKM -- added -- needed? */
+ #include <asm/cf_cacheflush.h>
+ 
+ extern inline void pte_free_kernel(pte_t *pte)
+@@ -41,6 +37,7 @@ extern inline pmd_t *pmd_alloc_kernel(pg
+ 
+ #define pmd_populate(mm, pmd, page) (pmd_val(*pmd) = \
+ 	(unsigned long)(page_address(page)))
++
+ #define pmd_populate_kernel(mm, pmd, pte) (pmd_val(*pmd) = (unsigned long)(pte))
+ 
+ static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *page)
+--- a/include/asm-m68k/cf_pgtable.h
++++ b/include/asm-m68k/cf_pgtable.h
+@@ -341,7 +341,7 @@ static inline pte_t pgoff_to_pte(unsigne
+ #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+ #define __swp_entry_to_pte(x)	(__pte((x).val))
+ 
+-#define pmd_page(pmd)		virt_to_page(__pmd_page(pmd))
++#define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+ 
+ #define pte_offset_map(pmdp, address) ((pte_t *)__pmd_page(*pmdp) +	\
+ 				       __pte_offset(address))
+--- a/include/asm-m68k/cfcache.h
++++ b/include/asm-m68k/cfcache.h
+@@ -87,6 +87,12 @@
+ #define CACHE_SETS 0x0200		/* 512 sets */
+ #define CACHE_WAYS 0x0004		/* 4 way */
+ 
++/* in for the old cpushl caching code */
++#define _DCACHE_SET_MASK ((DCACHE_SIZE/64-1)<<CACHE_WAYS)
++#define _ICACHE_SET_MASK ((ICACHE_SIZE/64-1)<<CACHE_WAYS)
++#define LAST_DCACHE_ADDR _DCACHE_SET_MASK
++#define LAST_ICACHE_ADDR _ICACHE_SET_MASK
++
+ #define CACHE_DISABLE_MODE	(CF_CACR_DCINVA+	\
+ 				 CF_CACR_BCINVA+	\
+ 				 CF_CACR_ICINVA)
+--- a/include/asm-m68k/page.h
++++ b/include/asm-m68k/page.h
+@@ -123,13 +123,21 @@ extern unsigned long m68k_memoffset;
+ #if defined(CONFIG_COLDFIRE)
+ static inline unsigned long ___pa(void *vaddr)
+ {
++#if CONFIG_SDRAM_BASE != PAGE_OFFSET
+ 	return (((unsigned long)vaddr & 0x0fffffff) + CONFIG_SDRAM_BASE);
++#else
++	return (unsigned long)vaddr;
++#endif
+ }
+ #define __pa(vaddr)	___pa((void *)(vaddr))
+ 
+ static inline void *__va(unsigned long paddr)
+ {
++#if CONFIG_SDRAM_BASE != PAGE_OFFSET
+ 	return (void *)((paddr & 0x0fffffff) + PAGE_OFFSET);
++#else
++	return (void *)paddr;
++#endif
+ }
+ 
+ #else
+--- a/include/asm-m68k/page_offset.h
++++ b/include/asm-m68k/page_offset.h
+@@ -1,16 +1,15 @@
++/*
++ * Page and physical memory maps.
++ */
++#if defined(CONFIG_SUN3)
++#define PAGE_OFFSET_RAW		0x0E000000
++
++#elif defined(CONFIG_M54455) || defined(CONFIG_M547X_8X)
++#define	PHYS_OFFSET		CONFIG_SDRAM_BASE
++#define PAGE_OFFSET_RAW		(PHYS_OFFSET)
++/* #define PAGE_OFFSET_RAW		0xC0000000 */
+ 
+-/* This handles the memory map.. */
+-#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
++#else
++/* default */
+ #define PAGE_OFFSET_RAW		0x00000000
+-#elif defined(CONFIG_SUN3)
+-#define PAGE_OFFSET_RAW		0x0E000000
+-#else /* CONFIG_COLDFIRE */
+-#if defined(CONFIG_M54455)
+-#define PAGE_OFFSET_RAW		0xC0000000
+-#define	PHYS_OFFSET		0x40000000
+-#elif defined(CONFIG_M547X_8X)
+-#define PAGE_OFFSET_RAW		0xC0000000
+-#define	PHYS_OFFSET		0x00000000
+ #endif
+-#endif
+-
diff --git a/target/linux/coldfire/patches/047-m547x_8x_fec_cleanup.patch b/target/linux/coldfire/patches/047-m547x_8x_fec_cleanup.patch
new file mode 100644
index 0000000000..9c36804e39
--- /dev/null
+++ b/target/linux/coldfire/patches/047-m547x_8x_fec_cleanup.patch
@@ -0,0 +1,1223 @@
+From 5bac5f471fb1124c51a5811757c54174f6224e7e Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 12 Mar 2008 17:13:29 -0600
+Subject: [PATCH] Clean up FEC DMA driver.
+
+LTIBName: m547x-8x-fec-cleanup
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/net/fec/fec.c |  611 +++++++++++++++++++++---------------------------
+ 1 files changed, 267 insertions(+), 344 deletions(-)
+
+--- a/drivers/net/fec/fec.c
++++ b/drivers/net/fec/fec.c
+@@ -4,7 +4,6 @@
+  *
+  * Code crunched to get it to work on 2.6.24 -- FEC cleanup coming
+  * soon -- Kurt Mahan
+- *
+  */
+ #include <linux/module.h>
+ #include <linux/kernel.h>
+@@ -44,42 +43,40 @@
+ #undef	FEC_2
+ #endif
+ 
+-#define VERSION "0.13"
++#define VERSION "0.20"
+ MODULE_DESCRIPTION( "DMA Fast Ethernet Controller driver ver " VERSION);
+ 
+-// Private structure
++/* fec private */
+ struct fec_priv {
+ 	struct net_device *netdev;		/* owning net device */
+-	void* fecpriv_txbuf[FEC_TX_BUF_NUMBER];	//Array of transmission buffers
+-	MCD_bufDescFec *fecpriv_txdesc;	// Array of transmission descriptors
+-	volatile unsigned int fecpriv_current_tx;	// Inex of the transmission descriptor that is used by DMA
+-	volatile unsigned int fecpriv_next_tx;	// Inex of the transmission descriptor that can be used for new data
+-	unsigned int fecpriv_current_rx;	// Index of the reception descriptor that is used by DMA
+-	MCD_bufDescFec *fecpriv_rxdesc;		// Array of reception descriptors
+-//	unsigned char *fecpriv_rxbuf;		// Address of reception buffers
+-	struct sk_buff *askb_rx[FEC_RX_BUF_NUMBER]; // Array of reception skb structure pointers
+-	unsigned int fecpriv_initiator_rx;	// Reception DMA initiator
+-	unsigned int fecpriv_initiator_tx;	// Transmission DMA initiator
+-	int fecpriv_fec_rx_channel;	// DMA reception channel
+-	int fecpriv_fec_tx_channel;	// DMA transmission channel
+-	int fecpriv_rx_requestor;	// DMA reception requestor
+-	int fecpriv_tx_requestor;	// DMA transmission requestor
+-	void *fecpriv_interrupt_fec_rx_handler;	// DMA reception handler
+-	void *fecpriv_interrupt_fec_tx_handler;	// DMA transmission handler
+-	unsigned char *fecpriv_mac_addr;	// Private copy of FEC address
+-	struct net_device_stats fecpriv_stat;	// Pointer to the statistical information
++	void* fecpriv_txbuf[FEC_TX_BUF_NUMBER];	/* tx buffer ptrs */
++	MCD_bufDescFec *fecpriv_txdesc;		/* tx descriptor ptrs */
++	volatile unsigned int fecpriv_current_tx; /* current tx desc index */
++	volatile unsigned int fecpriv_next_tx;	/* next tx desc index */
++	unsigned int fecpriv_current_rx;	/* current rx desc index */
++	MCD_bufDescFec *fecpriv_rxdesc;		/* rx descriptor ptrs */
++	struct sk_buff *askb_rx[FEC_RX_BUF_NUMBER]; /* rx SKB ptrs */
++	unsigned int fecpriv_initiator_rx;	/* rx dma initiator */
++	unsigned int fecpriv_initiator_tx;	/* tx dma initiator */
++	int fecpriv_fec_rx_channel;		/* rx dma channel */
++	int fecpriv_fec_tx_channel;		/* tx dma channel */
++	int fecpriv_rx_requestor;		/* rx dma requestor */
++	int fecpriv_tx_requestor;		/* tx dma requestor */
++	void *fecpriv_interrupt_fec_rx_handler;	/* dma rx handler */
++	void *fecpriv_interrupt_fec_tx_handler;	/* dma tx handler */
++	unsigned char *fecpriv_mac_addr;	/* private fec mac addr */
++	struct net_device_stats fecpriv_stat;	/* stats ptr */
+ 	spinlock_t fecpriv_lock;
+ 	int fecpriv_rxflag;
+ 	struct tasklet_struct fecpriv_tasklet_reinit;
+-	int index;
++	int index;				/* fec hw number */
+ };
+ 
+ struct net_device *fec_dev[FEC_MAX_PORTS];
+ 
+-// FEC functions
++/* FEC functions */
+ int __init fec_init(void);
+ struct net_device_stats *fec_get_stat(struct net_device *dev);
+-
+ int fec_open(struct net_device *dev);
+ int fec_close(struct net_device *nd);
+ int fec_tx(struct sk_buff *skb, struct net_device *dev);
+@@ -93,10 +90,12 @@ void fec_interrupt_fec_tx_handler_fec0(v
+ void fec_interrupt_fec_rx_handler_fec0(void);
+ void fec_interrupt_fec_reinit(unsigned long data);
+ 
+-unsigned char fec_mac_addr_fec0[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x50 };	// Default address of FEC0
++/* default fec0 address */
++unsigned char fec_mac_addr_fec0[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x50 };
+ 
+ #ifdef   FEC_2
+-unsigned char fec_mac_addr_fec1[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x51 };	// Default address of FEC1
++/* default fec1 address */
++unsigned char fec_mac_addr_fec1[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x51 };
+ #endif
+ 
+ extern unsigned char uboot_enet0[];
+@@ -111,17 +110,18 @@ int __init fec_mac_setup0 (char *s);
+ #ifdef   FEC_2
+ void fec_interrupt_fec_tx_handler_fec1(void);
+ void fec_interrupt_fec_rx_handler_fec1(void);
++#endif
+ 
+ #ifndef MODULE
+ int __init fec_mac_setup1 (char *s);
+ #endif
+ 
+-#endif
+ int fec_read_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int *data);
+ int fec_write_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int data);
+ 
+ module_init(fec_init);
+ /* module_exit(fec_cleanup); */
++
+ __setup("mac0=", fec_mac_setup0);
+ 
+ #ifdef   FEC_2
+@@ -140,7 +140,6 @@ int fec_enet_init(struct net_device *dev
+ 	fp->index = index;
+ 	fp->netdev = dev;
+ 	fec_dev[ index ] = dev;
+-printk(KERN_INFO "FEI: index=%d\n", index);
+ 
+ 	if (index == 0) {
+ 		/* disable fec0 */
+@@ -175,8 +174,6 @@ printk(KERN_INFO "FEI: index=%d\n", inde
+ 		/* rx descriptors */
+ 		fp->fecpriv_rxdesc = (void*)FEC_RX_DESC_FEC0;
+ 
+-printk(KERN_INFO "FEI: txdesc=0x%p  rxdesc=0x%p\n", fp->fecpriv_txdesc, fp->fecpriv_rxdesc);
+-
+ 		/* mac addr */
+ 		if (uboot_enet0[0] || uboot_enet0[1] || uboot_enet0[2] ||
+ 		    uboot_enet0[3] || uboot_enet0[4] || uboot_enet0[5]) {
+@@ -229,8 +226,6 @@ printk(KERN_INFO "FEI: txdesc=0x%p  rxde
+ #endif
+ 	}
+ 
+-printk(KERN_INFO "FEI: index=%d base_addr=0x%lx\n", index, dev->base_addr);
+-
+ 	/* clear MIB */
+ 	memset((void *) (dev->base_addr + 0x200), 0, FEC_MIB_LEN);
+ 
+@@ -288,8 +283,7 @@ int __init fec_init(void)
+ 	int err;
+ 	DECLARE_MAC_BUF(mac);
+ 
+-	printk(KERN_INFO "FEC ENET (DMA) Version .00\n");
+-
++	printk(KERN_INFO "FEC ENET (DMA) Version %s\n", VERSION);
+ 
+ 	for (i = 0; i < FEC_MAX_PORTS; i++) {
+ 		dev = alloc_etherdev(sizeof(struct fec_priv));
+@@ -333,7 +327,6 @@ void fec_stop(struct net_device *dev)
+ *
+ * RETURNS: If no error occurs, this function returns zero.
+ *************************************************************************/
+-
+ int fec_open(struct net_device *dev)
+ {
+ 	struct fec_priv *fp = netdev_priv(dev);
+@@ -343,13 +336,10 @@ int fec_open(struct net_device *dev)
+ 	int channel;
+ 	int error_code = -EBUSY;
+ 
+-printk(KERN_INFO "FECOPEN: index=%d\n", fp->index);
+-
+-	//Receive the DMA channels
++	/* Receive the DMA channels */
+ 	channel = dma_set_channel_fec(fp->fecpriv_rx_requestor);
+ 
+-	if (channel == -1)
+-	{
++	if (channel == -1) {
+ 		printk("Dma channel cannot be reserved\n");
+ 		goto ERRORS;
+ 	}
+@@ -360,60 +350,54 @@ printk(KERN_INFO "FECOPEN: index=%d\n", 
+ 
+ 	channel = dma_set_channel_fec(fp->fecpriv_tx_requestor);
+ 
+-	if (channel == -1)
+-	{
++	if (channel == -1) {
+ 		printk("Dma channel cannot be reserved\n");
+ 		goto ERRORS;
+ 	}
+-printk(KERN_INFO "FECOPEN2\n");
+ 
+ 	fp->fecpriv_fec_tx_channel = channel;
+ 
+ 	dma_connect(channel, (int) fp->fecpriv_interrupt_fec_tx_handler);
+ 
+-	// init tasklet for controller reinitialization
++	/* init tasklet for controller reinitialization */
+ 	tasklet_init(&fp->fecpriv_tasklet_reinit, fec_interrupt_fec_reinit, (unsigned long) dev);
+-printk(KERN_INFO "FECOPEN3\n");
+ 
+-	// Reset FIFOs
++	/* Reset FIFOs */
+ 	FEC_FECFRST(base_addr) |= FEC_SW_RST | FEC_RST_CTL;
+ 	FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
+ 
+-	// Reset and disable FEC
++	/* Reset and disable FEC */
+ 	FEC_ECR(base_addr) = FEC_ECR_RESET;
+ 
+-	// Wait
+ 	udelay(10);
+ 
+-	// Clear all events
++	/* Clear all events */
+ 	FEC_EIR(base_addr) = FEC_EIR_CLEAR;
+ 
+-	// Reset FIFO status
++	/* Reset FIFO status */
+ 	FEC_FECTFSR(base_addr) = FEC_FECTFSR_MSK;
+ 	FEC_FECRFSR(base_addr) = FEC_FECRFSR_MSK;
+ 
+-#if 0
+-/* JKM -- move into HW init */
+-	// Copy the default address to the device structure
+-	memcpy(dev->dev_addr, fp->fecpriv_mac_addr, ETH_ALEN);
+-#endif
++	/* Set the default address */
++	FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) |
++			      (fp->fecpriv_mac_addr[1] << 16) |
++			      (fp->fecpriv_mac_addr[2] << 8) |
++			      fp->fecpriv_mac_addr[3];
++	FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) |
++			      (fp->fecpriv_mac_addr[5] << 16) | 0x8808;
+ 
+-	// Set the default address
+-	FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) | (fp->fecpriv_mac_addr[1] << 16) | (fp->fecpriv_mac_addr[2] << 8) | fp->fecpriv_mac_addr[3];
+-	FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) | (fp->fecpriv_mac_addr[5] << 16) | 0x8808;
+-
+-	// Reset the group address descriptor
++	/* Reset the group address descriptor */
+ 	FEC_GALR(base_addr) = 0x00000000;
+ 	FEC_GAUR(base_addr) = 0x00000000;
+ 
+-	// Reset the individual address descriptor
++	/* Reset the individual address descriptor */
+ 	FEC_IALR(base_addr) = 0x00000000;
+ 	FEC_IAUR(base_addr) = 0x00000000;
+ 
+-	// Set the receive control register
++	/* Set the receive control register */
+ 	FEC_RCR(base_addr) = FEC_RCR_MAX_FRM_SIZE | FEC_RCR_MII;
+ 
+-	// Set the receive FIFO control register
++	/* Set the receive FIFO control register */
+ //	FEC_FECRFCR(base_addr) = FEC_FECRFCR_FRM | FEC_FECRFCR_GR | FEC_FECRFCR_MSK;
+ 	FEC_FECRFCR(base_addr) = FEC_FECRFCR_FRM | FEC_FECRFCR_GR
+                              | (FEC_FECRFCR_MSK     // disable all but ...
+@@ -422,10 +406,10 @@ printk(KERN_INFO "FECOPEN3\n");
+ //                                & ~FEC_FECRFCR_UF   // enable FIFO underflow
+                              );
+ 
+-	//Set the receive FIFO alarm register
++	/* Set the receive FIFO alarm register */
+ 	FEC_FECRFAR(base_addr) = FEC_FECRFAR_ALARM;
+ 
+-	// Set the transmit FIFO control register
++	/* Set the transmit FIFO control register */
+ //	FEC_FECTFCR(base_addr) = FEC_FECTFCR_FRM | FEC_FECTFCR_GR | FEC_FECTFCR_MSK;
+ 	FEC_FECTFCR(base_addr) = FEC_FECTFCR_FRM | FEC_FECTFCR_GR
+                              | (FEC_FECTFCR_MSK     // disable all but ...
+@@ -434,16 +418,16 @@ printk(KERN_INFO "FECOPEN3\n");
+ //                                & ~FEC_FECTFCR_UF   // enable FIFO underflow
+                                 & ~FEC_FECTFCR_OF); // enable FIFO overflow
+ 
+-	//Set the transmit FIFO alarm register
++	/* Set the transmit FIFO alarm register */
+ 	FEC_FECTFAR(base_addr) = FEC_FECTFAR_ALARM;
+ 
+-	// Set the Tx FIFO watermark
++	/* Set the Tx FIFO watermark */
+ 	FEC_FECTFWR(base_addr) = FEC_FECTFWR_XWMRK;
+ 
+-	// Enable the transmitter to append the CRC
++	/* Enable the transmitter to append the CRC */
+ 	FEC_CTCWR(base_addr) = FEC_CTCWR_TFCW_CRC;
+ 
+-	// Enable the ethernet interrupts
++	/* Enable the ethernet interrupts */
+ //	FEC_EIMR(base_addr) = FEC_EIMR_MASK;
+ 	FEC_EIMR(base_addr) = FEC_EIMR_DISABLE
+                             | FEC_EIR_LC
+@@ -453,9 +437,16 @@ printk(KERN_INFO "FECOPEN3\n");
+                             | FEC_EIR_XFERR
+                             | FEC_EIR_RFERR
+                             ;
+-printk(KERN_INFO "FECOPEN4\n");
+ 
+-#ifdef   CONFIG_FEC_548x_AUTO_NEGOTIATION
++/*
++ * JKM --
++ *
++ * There's a problem with the PHY initialization code -- 
++ * for now assume uboot left it in an initialized state.
++ */
++// printk(KERN_INFO "FECOPEN: starting auto-negotiation\n");
++// #ifdef   CONFIG_FEC_548x_AUTO_NEGOTIATION
++#if 0
+ 	if ((error_code = init_transceiver(base_addr, &fduplex)) != 0)
+ 	{
+ 		printk("Initialization of the transceiver is failed\n");
+@@ -464,25 +455,24 @@ printk(KERN_INFO "FECOPEN4\n");
+ #else
+ 	fduplex = 1;
+ #endif
+-printk(KERN_INFO "FECOPEN5\n");
++// printk(KERN_INFO "FECOPEN: done with auto-negotiation\n");
+ 
+ 	if (fduplex)
+-		// Enable the full duplex mode
++		/* Enable the full duplex mode */
+ 		FEC_TCR(base_addr) = FEC_TCR_FDEN | FEC_TCR_HBC;
+ 	else
+-		// Disable reception of frames while transmitting
++		/* Disable reception of frames while transmitting */
+ 		FEC_RCR(base_addr) |= FEC_RCR_DRT;
+ 
+-	// Enable MIB
++	/* Enable MIB */
+ 	FEC_MIBC(base_addr) = FEC_MIBC_ENABLE;
+ 
+-	// Enable FEC
++	/* Enable FEC */
+ 	FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
+ 
+-	// Initialize transmission descriptors and start DMA for the transmission
++	/* Initialize tx descriptors and start DMA for the transmission */
+ 	for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
+ 		fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT;
+-printk(KERN_INFO "FECOPEN6\n");
+ 
+ 	fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
+ 
+@@ -494,31 +484,27 @@ printk(KERN_INFO "FECOPEN6\n");
+ 		     FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT,
+ 		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
+ 
+-	// Initialize reception descriptors and start DMA for the reception
+-	for (i = 0; i < FEC_RX_BUF_NUMBER; i++)
+-	{
++	/* Initialize rx descriptors and start DMA for the reception */
++	for (i = 0; i < FEC_RX_BUF_NUMBER; i++) {
+ 		fp->askb_rx[i] = alloc_skb(FEC_MAXBUF_SIZE + 16, GFP_DMA);
+-		if (!fp->askb_rx[i])
+-		{
+-    		fp->fecpriv_rxdesc[i].dataPointer = 0;
+-    		fp->fecpriv_rxdesc[i].statCtrl = 0;
+-	    	fp->fecpriv_rxdesc[i].length = 0;
++		if (!fp->askb_rx[i]) {
++			fp->fecpriv_rxdesc[i].dataPointer = 0;
++			fp->fecpriv_rxdesc[i].statCtrl = 0;
++			fp->fecpriv_rxdesc[i].length = 0;
+ 		}
+-		else
+-		{
+-		    skb_reserve(fp->askb_rx[i], 16);
++		else {
++			skb_reserve(fp->askb_rx[i], 16);
+ 			fp->askb_rx[i]->dev = dev;
+-    		fp->fecpriv_rxdesc[i].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[i]->tail);
+-    		fp->fecpriv_rxdesc[i].statCtrl = MCD_FEC_BUF_READY | MCD_FEC_INTERRUPT;
+-	    	fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE;
+-	    }
++    			fp->fecpriv_rxdesc[i].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[i]->tail);
++    			fp->fecpriv_rxdesc[i].statCtrl = MCD_FEC_BUF_READY | MCD_FEC_INTERRUPT;
++	    		fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE;
++		}
+ 	}
+-printk(KERN_INFO "FECOPEN7\n");
+ 
+ 	fp->fecpriv_rxdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
+ 	fp->fecpriv_current_rx = 0;
+ 
+-	// flush entire data cache before restarting the DMA
++	/* flush entire data cache before restarting the DMA */
+ #if 0
+ /* JKM -- currently running with cache turned off */
+ 	DcacheFlushInvalidate();
+@@ -531,31 +517,24 @@ printk(KERN_INFO "FECOPEN7\n");
+ 		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
+ 
+ 	netif_start_queue(dev);
+-
+-//	MOD_INC_USE_COUNT;
+-printk(KERN_INFO "FECOPEN: finished\n");
+-
+ 	return 0;
+ 
+ ERRORS:
+ 
+-	// Remove the channels and return with the error code
+-	if (fp->fecpriv_fec_rx_channel != -1)
+-	{
++	/* Remove the channels and return with the error code */
++	if (fp->fecpriv_fec_rx_channel != -1) {
+ 		dma_disconnect(fp->fecpriv_fec_rx_channel);
+ 		dma_remove_channel_by_number(fp->fecpriv_fec_rx_channel);
+ 		fp->fecpriv_fec_rx_channel = -1;
+ 	}
+ 
+-	if (fp->fecpriv_fec_tx_channel != -1)
+-	{
++	if (fp->fecpriv_fec_tx_channel != -1) {
+ 		dma_disconnect(fp->fecpriv_fec_tx_channel);
+ 		dma_remove_channel_by_number(fp->fecpriv_fec_tx_channel);
+ 		fp->fecpriv_fec_tx_channel = -1;
+ 	}
+ 
+ 	return error_code;
+-
+ }
+ 
+ /************************************************************************
+@@ -568,31 +547,26 @@ ERRORS:
+ *************************************************************************/
+ int fec_close(struct net_device *dev)
+ {
+-	//Receive the pointer to the private structure
+ 	struct fec_priv *fp = netdev_priv(dev);
+-
+-	// Receive the base address
+ 	unsigned long base_addr = (unsigned long) dev->base_addr;
+-
+ 	unsigned long time;
+-
+ 	int i;
+ 
+ 	netif_stop_queue(dev);
+ 
+-	// Perform the graceful stop
++	/* Perform the graceful stop */
+ 	FEC_TCR(base_addr) |= FEC_TCR_GTS;
+ 
+ 	time = jiffies;
+ 
+-	// Wait for the graceful stop
++	/* Wait for the graceful stop */
+ 	while (!(FEC_EIR(base_addr) & FEC_EIR_GRA) && jiffies - time < FEC_GR_TIMEOUT * HZ)
+ 		schedule();
+ 
+-	// Disable FEC
++	/* Disable FEC */
+ 	FEC_ECR(base_addr) = FEC_ECR_DISABLE;
+ 
+-	// Reset the DMA channels
++	/* Reset the DMA channels */
+ 	spin_lock_irq(&fp->fecpriv_lock);
+ 	MCD_killDma(fp->fecpriv_fec_tx_channel);
+ 	spin_unlock_irq(&fp->fecpriv_lock);
+@@ -600,12 +574,12 @@ int fec_close(struct net_device *dev)
+ 	dma_disconnect(fp->fecpriv_fec_tx_channel);
+ 	fp->fecpriv_fec_tx_channel = -1;
+ 
+-	for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
+-		if (fp->fecpriv_txbuf[i])
+-		{
++	for (i = 0; i < FEC_TX_BUF_NUMBER; i++) {
++		if (fp->fecpriv_txbuf[i]) {
+ 			kfree(fp->fecpriv_txbuf[i]);
+ 			fp->fecpriv_txbuf[i] = NULL;
+ 		}
++	}
+ 
+ 	spin_lock_irq(&fp->fecpriv_lock);
+ 	MCD_killDma(fp->fecpriv_fec_rx_channel);
+@@ -615,15 +589,12 @@ int fec_close(struct net_device *dev)
+ 	dma_disconnect(fp->fecpriv_fec_rx_channel);
+ 	fp->fecpriv_fec_rx_channel = -1;
+ 
+-	for (i = 0; i < FEC_RX_BUF_NUMBER; i++)
+-	{
+-		if (fp->askb_rx[i])
+-		{
+-		    kfree_skb(fp->askb_rx[i]);
+-		    fp->askb_rx[i] = NULL;
+-	    }
++	for (i = 0; i < FEC_RX_BUF_NUMBER; i++) {
++		if (fp->askb_rx[i]) {
++			kfree_skb(fp->askb_rx[i]);
++			fp->askb_rx[i] = NULL;
++		}
+ 	}
+-//	MOD_DEC_USE_COUNT;
+ 
+ 	return 0;
+ }
+@@ -635,14 +606,10 @@ int fec_close(struct net_device *dev)
+ *************************************************************************/
+ struct net_device_stats * fec_get_stat(struct net_device *dev)
+ {
+-
+-	//Receive the pointer to the private structure
+ 	struct fec_priv *fp = netdev_priv(dev);
+-
+-	// Receive the base address
+ 	unsigned long base_addr = dev->base_addr;
+ 
+-	// Receive the statistical information
++	/* Receive the statistical information */
+ 	fp->fecpriv_stat.rx_packets = FECSTAT_RMON_R_PACKETS(base_addr);
+ 	fp->fecpriv_stat.tx_packets = FECSTAT_RMON_T_PACKETS(base_addr);
+ 	fp->fecpriv_stat.rx_bytes = FECSTAT_RMON_R_OCTETS(base_addr);
+@@ -651,7 +618,10 @@ struct net_device_stats * fec_get_stat(s
+ 	fp->fecpriv_stat.multicast = FECSTAT_RMON_R_MC_PKT(base_addr);
+ 	fp->fecpriv_stat.collisions = FECSTAT_RMON_T_COL(base_addr);
+ 
+-	fp->fecpriv_stat.rx_length_errors = FECSTAT_RMON_R_UNDERSIZE(base_addr) + FECSTAT_RMON_R_OVERSIZE(base_addr) + FECSTAT_RMON_R_FRAG(base_addr) + FECSTAT_RMON_R_JAB(base_addr);
++	fp->fecpriv_stat.rx_length_errors = FECSTAT_RMON_R_UNDERSIZE(base_addr) +
++		FECSTAT_RMON_R_OVERSIZE(base_addr) +
++		FECSTAT_RMON_R_FRAG(base_addr) +
++		FECSTAT_RMON_R_JAB(base_addr);
+ 	fp->fecpriv_stat.rx_crc_errors = FECSTAT_IEEE_R_CRC(base_addr);
+ 	fp->fecpriv_stat.rx_frame_errors = FECSTAT_IEEE_R_ALIGN(base_addr);
+ 	fp->fecpriv_stat.rx_over_errors = FECSTAT_IEEE_R_MACERR(base_addr);
+@@ -660,9 +630,18 @@ struct net_device_stats * fec_get_stat(s
+ 	fp->fecpriv_stat.tx_fifo_errors = FECSTAT_IEEE_T_MACERR(base_addr);
+ 	fp->fecpriv_stat.tx_window_errors = FECSTAT_IEEE_T_LCOL(base_addr);
+ 
+-	// I hope that one frame doesn't have more than one error
+-	fp->fecpriv_stat.rx_errors = fp->fecpriv_stat.rx_length_errors + fp->fecpriv_stat.rx_crc_errors + fp->fecpriv_stat.rx_frame_errors + fp->fecpriv_stat.rx_over_errors + fp->fecpriv_stat.rx_dropped;
+-	fp->fecpriv_stat.tx_errors = fp->fecpriv_stat.tx_carrier_errors + fp->fecpriv_stat.tx_fifo_errors + fp->fecpriv_stat.tx_window_errors + fp->fecpriv_stat.tx_aborted_errors + fp->fecpriv_stat.tx_heartbeat_errors + fp->fecpriv_stat.tx_dropped;
++	/* I hope that one frame doesn't have more than one error */
++	fp->fecpriv_stat.rx_errors = fp->fecpriv_stat.rx_length_errors +
++		fp->fecpriv_stat.rx_crc_errors +
++		fp->fecpriv_stat.rx_frame_errors +
++		fp->fecpriv_stat.rx_over_errors +
++		fp->fecpriv_stat.rx_dropped;
++	fp->fecpriv_stat.tx_errors = fp->fecpriv_stat.tx_carrier_errors +
++		fp->fecpriv_stat.tx_fifo_errors +
++		fp->fecpriv_stat.tx_window_errors +
++		fp->fecpriv_stat.tx_aborted_errors +
++		fp->fecpriv_stat.tx_heartbeat_errors +
++		fp->fecpriv_stat.tx_dropped;
+ 
+ 	return &fp->fecpriv_stat;
+ }
+@@ -674,59 +653,47 @@ struct net_device_stats * fec_get_stat(s
+ *************************************************************************/
+ void fec_set_multicast_list(struct net_device *dev)
+ {
+-	// Pointer to the address list
+ 	struct dev_mc_list *dmi;
+-
+ 	unsigned int crc, data;
+ 	int i, j, k;
+-
+-	// Receive the base address
+ 	unsigned long base_addr = (unsigned long) dev->base_addr;
+ 
+-	if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI)
+-	{
+-		// Allow all incoming frames
++	if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI) {
++		/* Allow all incoming frames */
+ 		FEC_GALR(base_addr) = 0xFFFFFFFF;
+ 		FEC_GAUR(base_addr) = 0xFFFFFFFF;
+ 		return;
+ 	}
+-	// Reset the group address register
++
++	/* Reset the group address register */
+ 	FEC_GALR(base_addr) = 0x00000000;
+ 	FEC_GAUR(base_addr) = 0x00000000;
+ 
+-	// Process all addresses
+-	for (i = 0, dmi = dev->mc_list; i < dev->mc_count; i++, dmi = dmi->next)
+-	{
+-		// Processing must be only for the group addresses
++	/* Process all addresses */
++	for (i = 0, dmi = dev->mc_list; i < dev->mc_count; i++, dmi = dmi->next) {
++		/* Processing must be only for the group addresses */
+ 		if (!(dmi->dmi_addr[0] & 1))
+ 			continue;
+ 
+-		// Calculate crc value for the current address
++		/* Calculate crc value for the current address */
+ 		crc = 0xFFFFFFFF;
+-		for (j = 0; j < dmi->dmi_addrlen; j++)
+-		{
+-
+-			for (k = 0, data = dmi->dmi_addr[j]; k < 8;  k++, data >>= 1)
+-			{
++		for (j = 0; j < dmi->dmi_addrlen; j++) {
++			for (k = 0, data = dmi->dmi_addr[j]; k < 8;  k++, data >>= 1) {
+ 				if ((crc ^ data) & 1)
+ 					crc = (crc >> 1) ^ FEC_CRCPOL;
+ 				else
+ 					crc >>= 1;
+-
+ 			}
+-
+ 		}
+ 
+-		// Add this value
++		/* Add this value */
+ 		crc >>= 26;
+ 		crc &= 0x3F;
+ 		if (crc > 31)
+ 			FEC_GAUR(base_addr) |= 0x1 << (crc - 32);
+ 		else
+ 			FEC_GALR(base_addr) |= 0x1 << crc;
+-
+ 	}
+-
+ }
+ 
+ /************************************************************************
+@@ -736,26 +703,27 @@ void fec_set_multicast_list(struct net_d
+ *************************************************************************/
+ int fec_set_mac_address(struct net_device *dev, void *p)
+ {
+-	//Receive the pointer to the private structure
+ 	struct fec_priv *fp = netdev_priv(dev);
+-
+-	// Receive the base address
+ 	unsigned long base_addr = (unsigned long) dev->base_addr;
+-
+ 	struct sockaddr *addr = p;
+ 
+ 	if (netif_running(dev))
+ 		return -EBUSY;
+ 
+-	// Copy a new address to the device structure
++	/* Copy a new address to the device structure */
+ 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ 
+-	// Copy a new address to the private structure
++	/* Copy a new address to the private structure */
+ 	memcpy(fp->fecpriv_mac_addr, addr->sa_data, 6);
+ 
+-	// Set the address to the registers
+-	FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) | (fp->fecpriv_mac_addr[1] << 16) | (fp->fecpriv_mac_addr[2] << 8) | fp->fecpriv_mac_addr[3];
+-	FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) | (fp->fecpriv_mac_addr[5] << 16) | 0x8808;
++	/* Set the address to the registers */
++	FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) |
++		(fp->fecpriv_mac_addr[1] << 16) |
++		(fp->fecpriv_mac_addr[2] << 8) |
++		fp->fecpriv_mac_addr[3];
++	FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) |
++		(fp->fecpriv_mac_addr[5] << 16) |
++		0x8808;
+ 
+ 	return 0;
+ }
+@@ -769,27 +737,24 @@ int fec_set_mac_address(struct net_devic
+ *************************************************************************/
+ int fec_tx(struct sk_buff *skb, struct net_device *dev)
+ {
+-
+-	//Receive the pointer to the private structure
+ 	struct fec_priv *fp = netdev_priv(dev);
+-
+ 	void *data, *data_aligned;
+ 	int offset;
+ 
+ 	data = kmalloc(skb->len + 15, GFP_DMA | GFP_ATOMIC);
+ 
+-	if (!data)
+-	{
++	if (!data) {
+ 		fp->fecpriv_stat.tx_dropped++;
+ 		dev_kfree_skb(skb);
+ 		return 0;
+ 	}
+ 
+-	offset = (((unsigned long)virt_to_phys(data) + 15) & 0xFFFFFFF0) - (unsigned long)virt_to_phys(data);
++	offset = (((unsigned long)virt_to_phys(data) + 15) & 0xFFFFFFF0) -
++		(unsigned long)virt_to_phys(data);
+ 	data_aligned = (void*)((unsigned long)data + offset);
+ 	memcpy(data_aligned, skb->data, skb->len);
+ 
+-	// flush data cache before initializing the descriptor and starting DMA
++	/* flush data cache before initializing the descriptor and starting DMA */
+ #if 0
+ /* JKM -- currently running with cache turned off */
+ 	DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(data_aligned), skb->len);
+@@ -797,7 +762,7 @@ int fec_tx(struct sk_buff *skb, struct n
+ 
+ 	spin_lock_irq(&fp->fecpriv_lock);
+ 
+-	// Initialize the descriptor
++	/* Initialize the descriptor */
+ 	fp->fecpriv_txbuf[fp->fecpriv_next_tx] = data;
+ 	fp->fecpriv_txdesc[fp->fecpriv_next_tx].dataPointer = (unsigned int) virt_to_phys(data_aligned);
+ 	fp->fecpriv_txdesc[fp->fecpriv_next_tx].length = skb->len;
+@@ -809,7 +774,7 @@ int fec_tx(struct sk_buff *skb, struct n
+ 
+ 	spin_unlock_irq(&fp->fecpriv_lock);
+ 
+-	// Tell the DMA to continue the transmission
++	/* Tell the DMA to continue the transmission */
+ 	MCD_continDma(fp->fecpriv_fec_tx_channel);
+ 
+ 	dev_kfree_skb(skb);
+@@ -835,14 +800,10 @@ void fec_tx_timeout(struct net_device *d
+ 
+ 	spin_lock_irq(&fp->fecpriv_lock);
+ 	MCD_killDma(fp->fecpriv_fec_tx_channel);
+-	for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
+-	{
+-		if (fp->fecpriv_txbuf[i])
+-		{
+-
++	for (i = 0; i < FEC_TX_BUF_NUMBER; i++) {
++		if (fp->fecpriv_txbuf[i]) {
+ 			kfree(fp->fecpriv_txbuf[i]);
+ 			fp->fecpriv_txbuf[i] = NULL;
+-
+ 		}
+ 		fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT;
+ 	}
+@@ -850,14 +811,14 @@ void fec_tx_timeout(struct net_device *d
+ 
+ 	fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0;
+ 
+-    // Reset FIFOs
++    /* Reset FIFOs */
+     FEC_FECFRST(base_addr) |= FEC_SW_RST;
+     FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
+ 
+-	// Reset and disable FEC
++	/* Reset and disable FEC */
+ //	FEC_ECR(base_addr) = FEC_ECR_RESET;
+ 
+-	// Enable FEC
++	/* Enable FEC */
+ 	FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
+ 
+ 	MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0,
+@@ -883,23 +844,22 @@ int fec_read_mii(unsigned int base_addr,
+ {
+ 	unsigned long time;
+ 
+-	// Clear the MII interrupt bit
++	/* Clear the MII interrupt bit */
+ 	FEC_EIR(base_addr) = FEC_EIR_MII;
+ 
+-	// Write to the MII management frame register
++	/* Write to the MII management frame register */
+ 	FEC_MMFR(base_addr) = FEC_MMFR_READ | (pa << 23) | (ra << 18);
+ 
+ 	time = jiffies;
+ 
+-	// Wait for the reading
+-	while (!(FEC_EIR(base_addr) & FEC_EIR_MII))
+-	{
++	/* Wait for the reading */
++	while (!(FEC_EIR(base_addr) & FEC_EIR_MII)) {
+ 		if (jiffies - time > FEC_MII_TIMEOUT * HZ)
+ 			return -ETIME;
+ 		schedule();
+ 	}
+ 
+-	// Clear the MII interrupt bit
++	/* Clear the MII interrupt bit */
+ 	FEC_EIR(base_addr) = FEC_EIR_MII;
+ 
+ 	*data = FEC_MMFR(base_addr) & 0x0000FFFF;
+@@ -918,25 +878,22 @@ int fec_write_mii(unsigned int base_addr
+ {
+ 	unsigned long time;
+ 
+-	// Clear the MII interrupt bit
++	/* Clear the MII interrupt bit */
+ 	FEC_EIR(base_addr) = FEC_EIR_MII;
+ 
+-	// Write to the MII management frame register
++	/* Write to the MII management frame register */
+ 	FEC_MMFR(base_addr) = FEC_MMFR_WRITE | (pa << 23) | (ra << 18) | data;
+ 
+ 	time = jiffies;
+ 
+-	// Wait for the writing
+-
+-	while (!(FEC_EIR(base_addr) & FEC_EIR_MII))
+-	{
++	/* Wait for the writing */
++	while (!(FEC_EIR(base_addr) & FEC_EIR_MII)) {
+ 		if (jiffies - time > FEC_MII_TIMEOUT * HZ)
+ 			return -ETIME;
+-
+ 		schedule();
+ 	}
+ 
+-	// Clear the MII interrupt bit
++	/* Clear the MII interrupt bit */
+ 	FEC_EIR(base_addr) = FEC_EIR_MII;
+ 
+ 	return 0;
+@@ -953,27 +910,24 @@ void fec_interrupt_fec_tx_handler(struct
+ {
+ 	struct fec_priv *fp = netdev_priv(dev);
+ 
+-	//Release the socket buffer
+-	if(fp->fecpriv_txbuf[fp->fecpriv_current_tx])
+-	{
++	/* Release the socket buffer */
++	if(fp->fecpriv_txbuf[fp->fecpriv_current_tx]) {
+ 		kfree(fp->fecpriv_txbuf[fp->fecpriv_current_tx]);
+ 		fp->fecpriv_txbuf[fp->fecpriv_current_tx] = NULL;
+ 	}
+ 	fp->fecpriv_current_tx = (fp->fecpriv_current_tx + 1) & FEC_TX_INDEX_MASK;
+ 
+-	if (MCD_dmaStatus(fp->fecpriv_fec_tx_channel) == MCD_DONE)
+-		for (; fp->fecpriv_current_tx != fp->fecpriv_next_tx; fp->fecpriv_current_tx = (fp->fecpriv_current_tx + 1) & FEC_TX_INDEX_MASK)
+-		{
+-			if(fp->fecpriv_txbuf[fp->fecpriv_current_tx])
+-			{
++	if (MCD_dmaStatus(fp->fecpriv_fec_tx_channel) == MCD_DONE) {
++		for (; fp->fecpriv_current_tx != fp->fecpriv_next_tx; fp->fecpriv_current_tx = (fp->fecpriv_current_tx + 1) & FEC_TX_INDEX_MASK) {
++			if(fp->fecpriv_txbuf[fp->fecpriv_current_tx]) {
+ 				kfree(fp->fecpriv_txbuf[fp->fecpriv_current_tx]);
+ 				fp->fecpriv_txbuf[fp->fecpriv_current_tx] = NULL;
+ 			}
+ 		}
++	}
+ 
+ 	if (netif_queue_stopped(dev))
+ 		netif_wake_queue(dev);
+-
+ }
+ 
+ /************************************************************************
+@@ -1008,49 +962,41 @@ void fec_interrupt_fec_rx_handler(struct
+ 		}
+ 	}
+ */
+-	for (; fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME;	fp->fecpriv_current_rx = (fp->fecpriv_current_rx + 1) & FEC_RX_INDEX_MASK)
+-	{
++	for (; fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME;	fp->fecpriv_current_rx = (fp->fecpriv_current_rx + 1) & FEC_RX_INDEX_MASK) {
+ 	    if( (fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length <= FEC_MAXBUF_SIZE) &&
+-		    (fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length > 4)) // --tym--
+-	    {
++		    (fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length > 4)) { /* --tym-- */
+     		skb = fp->askb_rx[fp->fecpriv_current_rx];
+     		if (!skb)
+-    		{
+-    		    fp->fecpriv_stat.rx_dropped++;
+-            }
+-    		else
+-    		{
+-    		    // flush data cache before initializing the descriptor and starting DMA
++			fp->fecpriv_stat.rx_dropped++;
++    		else {
++    		    /* flush data cache before initializing the descriptor and starting DMA */
+ //		    DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), fp->askb_rx[fp->fecpriv_current_rx]->len);
+ 
+     			skb_put(skb, fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length - 4);
+-//    			skb->dev = dev;
+     			skb->protocol = eth_type_trans(skb, dev);
+     			netif_rx(skb);
+-    		}
+-		    fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl &= ~MCD_FEC_END_FRAME;
+-    		// allocate new skbuff
++		}
++		fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl &= ~MCD_FEC_END_FRAME;
++    		/* allocate new skbuff */
+     		fp->askb_rx[fp->fecpriv_current_rx] = alloc_skb(FEC_MAXBUF_SIZE + 16, /*GFP_ATOMIC |*/ GFP_DMA);
+-		    if (!fp->askb_rx[fp->fecpriv_current_rx])
+-    	    {
+-        		fp->fecpriv_rxdesc[fp->fecpriv_current_rx].dataPointer = 0;
+-	    	    fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length = 0;
+-    		    fp->fecpriv_stat.rx_dropped++;
+-		    }
+-    		else
+-    		{
+-    		    skb_reserve(fp->askb_rx[fp->fecpriv_current_rx], 16);
+-    			fp->askb_rx[fp->fecpriv_current_rx]->dev = dev;
++		if (!fp->askb_rx[fp->fecpriv_current_rx]) {
++			fp->fecpriv_rxdesc[fp->fecpriv_current_rx].dataPointer = 0;
++			fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length = 0;
++			fp->fecpriv_stat.rx_dropped++;
++		}
++    		else {
++			skb_reserve(fp->askb_rx[fp->fecpriv_current_rx], 16);
++			fp->askb_rx[fp->fecpriv_current_rx]->dev = dev;
+ 
+-    		    // flush data cache before initializing the descriptor and starting DMA
++			/* flush data cache before initializing the descriptor and starting DMA */
+ #if 0
+ /* JKM -- currently running with cache turned off */
+-		    DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), FEC_MAXBUF_SIZE);
++			DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), FEC_MAXBUF_SIZE);
+ #endif
+ 
+     	    	fp->fecpriv_rxdesc[fp->fecpriv_current_rx].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail);
+     	    	fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length = FEC_MAXBUF_SIZE;
+-        		fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl |= MCD_FEC_BUF_READY;
++		fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl |= MCD_FEC_BUF_READY;
+ 
+     		    // flush data cache before initializing the descriptor and starting DMA
+ //		    DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), FEC_MAXBUF_SIZE);
+@@ -1059,11 +1005,10 @@ void fec_interrupt_fec_rx_handler(struct
+ 
+ 	}
+ 
+-	// Tell the DMA to continue the reception
++	/* Tell the DMA to continue the reception */
+ 	MCD_continDma(fp->fecpriv_fec_rx_channel);
+ 
+ 	fp->fecpriv_rxflag = 0;
+-
+ }
+ 
+ /************************************************************************
+@@ -1080,76 +1025,70 @@ irqreturn_t fec_interrupt_handler(int ir
+ 	unsigned long base_addr = (unsigned long) dev->base_addr;
+ 	unsigned long events;
+ 
+-	// Read and clear the events
++	/* Read and clear the events */
+ 	events = FEC_EIR(base_addr) & FEC_EIMR(base_addr);
+ 
+-	if (events & FEC_EIR_HBERR)
+-	{
++	if (events & FEC_EIR_HBERR) {
+ 		fp->fecpriv_stat.tx_heartbeat_errors++;
+-    	FEC_EIR(base_addr) = FEC_EIR_HBERR;
++		FEC_EIR(base_addr) = FEC_EIR_HBERR;
+ 	}
+ 
+-    // receive/transmit FIFO error
+-    if (((events & FEC_EIR_RFERR) != 0) || ((events & FEC_EIR_XFERR) != 0))
+-    {
+-        // kill DMA receive channel
+-        MCD_killDma (fp->fecpriv_fec_rx_channel);
+-        // kill running transmission by DMA
+-        MCD_killDma (fp->fecpriv_fec_tx_channel);
+-
+-        // Reset FIFOs
+-        FEC_FECFRST(base_addr) |= FEC_SW_RST;
+-        FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
+-
+-        // reset receive FIFO status register
+-        FEC_FECRFSR(base_addr) = FEC_FECRFSR_FAE
+-                                 | FEC_FECRFSR_RXW
+-                                 | FEC_FECRFSR_UF;
+-
+-        // reset transmit FIFO status register
+-        FEC_FECTFSR(base_addr) = FEC_FECTFSR_FAE
+-                                 | FEC_FECTFSR_TXW
+-                                 | FEC_FECTFSR_UF
+-                                 | FEC_FECTFSR_OF;
++	/* receive/transmit FIFO error */
++    	if (((events & FEC_EIR_RFERR) != 0) || ((events & FEC_EIR_XFERR) != 0)) {
++        	/* kill DMA receive channel */
++        	MCD_killDma (fp->fecpriv_fec_rx_channel);
+ 
+-        // reset RFERR and XFERR event
+-        FEC_EIR(base_addr) = FEC_EIR_RFERR | FEC_EIR_XFERR;
++        	/* kill running transmission by DMA */
++        	MCD_killDma (fp->fecpriv_fec_tx_channel);
+ 
+-	// stop queue
+-	netif_stop_queue(dev);
+-	
+-        // execute reinitialization as tasklet
+-    	tasklet_schedule(&fp->fecpriv_tasklet_reinit);
++		/* Reset FIFOs */
++        	FEC_FECFRST(base_addr) |= FEC_SW_RST;
++        	FEC_FECFRST(base_addr) &= ~FEC_SW_RST;
+ 
+-        fp->fecpriv_stat.rx_dropped++;
++        	/* reset receive FIFO status register */
++        	FEC_FECRFSR(base_addr) = FEC_FECRFSR_FAE |
++					 FEC_FECRFSR_RXW |
++					 FEC_FECRFSR_UF;
+ 
+-    }
++		/* reset transmit FIFO status register */
++        	FEC_FECTFSR(base_addr) = FEC_FECTFSR_FAE |
++					 FEC_FECTFSR_TXW |
++					 FEC_FECTFSR_UF |
++					 FEC_FECTFSR_OF;
+ 
+-    // transmit FIFO underrun
+-    if ((events & FEC_EIR_XFUN) != 0)
+-    {
+-        // reset XFUN event
+-        FEC_EIR(base_addr) = FEC_EIR_XFUN;
+-		fp->fecpriv_stat.tx_aborted_errors++;
+-    }
++		/* reset RFERR and XFERR event */
++        	FEC_EIR(base_addr) = FEC_EIR_RFERR | FEC_EIR_XFERR;
++
++		/* stop queue */
++		netif_stop_queue(dev);
++	
++		/* execute reinitialization as tasklet */
++		tasklet_schedule(&fp->fecpriv_tasklet_reinit);
++
++		fp->fecpriv_stat.rx_dropped++;
++	}
+ 
+-    // late collision
+-    if ((events & FEC_EIR_LC) != 0)
+-    {
+-        // reset LC event
+-        FEC_EIR(base_addr) = FEC_EIR_LC;
++	/* transmit FIFO underrun */
++    	if ((events & FEC_EIR_XFUN) != 0) {
++        	/* reset XFUN event */
++        	FEC_EIR(base_addr) = FEC_EIR_XFUN;
+ 		fp->fecpriv_stat.tx_aborted_errors++;
+-    }
++    	}
+ 
+-    // collision retry limit
+-    if ((events & FEC_EIR_RL) != 0)
+-    {
+-        // reset RL event
+-        FEC_EIR(base_addr) = FEC_EIR_RL;
++	/* late collision */
++    	if ((events & FEC_EIR_LC) != 0) {
++        	/* reset LC event */
++		FEC_EIR(base_addr) = FEC_EIR_LC;
+ 		fp->fecpriv_stat.tx_aborted_errors++;
+-    }
++    	}
+ 
+-    return 0;
++	/* collision retry limit */
++    	if ((events & FEC_EIR_RL) != 0) {
++		/* reset RL event */
++        	FEC_EIR(base_addr) = FEC_EIR_RL;
++		fp->fecpriv_stat.tx_aborted_errors++;
++    	}
++    	return 0;
+ }
+ 
+ /************************************************************************
+@@ -1166,52 +1105,46 @@ void fec_interrupt_fec_reinit(unsigned l
+ 	struct fec_priv *fp = netdev_priv(dev);
+ 	unsigned long base_addr = (unsigned long) dev->base_addr;
+ 
+-	// Initialize reception descriptors and start DMA for the reception
+-	for (i = 0; i < FEC_RX_BUF_NUMBER; i++)
+-	{
+-		if (!fp->askb_rx[i])
+-		{
+-    		fp->askb_rx[i] = alloc_skb(FEC_MAXBUF_SIZE + 16, GFP_ATOMIC | GFP_DMA);
+-        	if (!fp->askb_rx[i])
+-		    {
+-        		fp->fecpriv_rxdesc[i].dataPointer = 0;
+-	        	fp->fecpriv_rxdesc[i].statCtrl = 0;
+-    	    	fp->fecpriv_rxdesc[i].length = 0;
+-    	    	continue;
+-	        }
++	/* Initialize reception descriptors and start DMA for the reception */
++	for (i = 0; i < FEC_RX_BUF_NUMBER; i++) {
++		if (!fp->askb_rx[i]) {
++			fp->askb_rx[i] = alloc_skb(FEC_MAXBUF_SIZE + 16, GFP_ATOMIC | GFP_DMA);
++			if (!fp->askb_rx[i]) {
++				fp->fecpriv_rxdesc[i].dataPointer = 0;
++				fp->fecpriv_rxdesc[i].statCtrl = 0;
++				fp->fecpriv_rxdesc[i].length = 0;
++				continue;
++			}
+ 			fp->askb_rx[i]->dev = dev;
+-    	    skb_reserve(fp->askb_rx[i], 16);
+-	    }
+-	    fp->fecpriv_rxdesc[i].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[i]->tail);
++			skb_reserve(fp->askb_rx[i], 16);
++		}
++		fp->fecpriv_rxdesc[i].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[i]->tail);
+ 		fp->fecpriv_rxdesc[i].statCtrl = MCD_FEC_BUF_READY | MCD_FEC_INTERRUPT;
+-    	fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE;
++		fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE;
+ 	}
+ 
+ 	fp->fecpriv_rxdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
+ 	fp->fecpriv_current_rx = 0;
+ 
+-    // restart frame transmission
+-	for (i = 0; i < FEC_TX_BUF_NUMBER; i++)
+-	{
+-		if (fp->fecpriv_txbuf[i])
+-		{
+-
++	/* restart frame transmission */
++	for (i = 0; i < FEC_TX_BUF_NUMBER; i++) {
++		if (fp->fecpriv_txbuf[i]) {
+ 			kfree(fp->fecpriv_txbuf[i]);
+ 			fp->fecpriv_txbuf[i] = NULL;
+-    		fp->fecpriv_stat.tx_dropped++;
++    			fp->fecpriv_stat.tx_dropped++;
+ 		}
+ 		fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT;
+ 	}
+ 	fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP;
+ 	fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0;
+ 
+-	// flush entire data cache before restarting the DMA
++	/* flush entire data cache before restarting the DMA */
+ #if 0
+ /* JKM -- currently running with cache turned off */
+ 	DcacheFlushInvalidate();
+ #endif
+ 	
+-    // restart DMA from beginning
++	/* restart DMA from beginning */
+ 	MCD_startDma(fp->fecpriv_fec_rx_channel,
+ 		     (char *) fp->fecpriv_rxdesc, 0,
+ 		     (unsigned char *) &(FEC_FECRFDR(base_addr)), 0,
+@@ -1225,11 +1158,10 @@ void fec_interrupt_fec_reinit(unsigned l
+ 		     FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT,
+ 		     MCD_NO_CSUM | MCD_NO_BYTE_SWAP);
+ 
+-    // Enable FEC
+-    FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
++	/* Enable FEC */
++	FEC_ECR(base_addr) |= FEC_ECR_ETHEREN;
+ 
+ 	netif_wake_queue(dev);
+-
+ }
+ 
+ /************************************************************************
+@@ -1284,8 +1216,8 @@ void fec_interrupt_fec_rx_handler_fec1(v
+ }
+ 
+ #endif
+-#ifndef MODULE
+ 
++#ifndef MODULE
+ /************************************************************************
+ * NAME: fec_mac_setup0
+ *
+@@ -1300,7 +1232,6 @@ int __init fec_mac_setup0(char *s)
+ 	if(fec_str_to_mac(s, fec_mac_addr_fec0))
+ 		printk("The MAC address of FEC0 cannot be set from command line");
+ 	return 1;
+-
+ }
+ 
+ #ifdef   FEC_2
+@@ -1316,11 +1247,9 @@ int __init fec_mac_setup1(char *s)
+ 	if(!s || !*s)
+ 		return 1;
+ 
+-
+ 	if(fec_str_to_mac(s, fec_mac_addr_fec1))
+ 		printk("The MAC address of FEC1 cannot be set from command line");
+ 	return 1;
+-
+ }
+ #endif
+ 
+@@ -1332,52 +1261,46 @@ int __init fec_mac_setup1(char *s)
+ *************************************************************************/
+ int fec_str_to_mac( char *str_mac, unsigned char* addr)
+ {
+-    unsigned long val;
++	unsigned long val;
+ 	char c;
+ 	unsigned long octet[6], *octetptr = octet;
+ 	int i;
+-again:
+ 
++again:
+ 	val = 0;
+-	while ((c = *str_mac) != '\0')
+-	{
+-		if ((c>='0')&&(c<='9'))
+-		{
++	while ((c = *str_mac) != '\0') {
++		if ((c>='0')&&(c<='9')) {
+ 			val = (val * 16) + (c - '0');
+ 			str_mac++;
+ 			continue;
+ 		}
+-		else
+-		if (((c>='a')&&(c<='f'))||((c>='A')&&(c<='F')))
+-		{
++		else if (((c>='a')&&(c<='f'))||((c>='A')&&(c<='F'))) {
+ 			val = (val << 4) + (c + 10 - (((c>='a')&&(c<='f')) ? 'a' : 'A'));
+ 			str_mac++;
+ 			continue;
+ 		}
+ 		break;
+ 	}
+-	if (*str_mac == ':')
+-	{
++	if (*str_mac == ':') {
+ 		*octetptr++ = val, str_mac++;
+ 		if (octetptr >= octet + 6)
+ 			return 1;
+ 		goto again;
+ 	}
+ 
+-	 //Check for trailing characters.
++	/* Check for trailing characters */
+ 	if (*str_mac && !(*str_mac==' '))
+ 		return 1;
++
+ 	*octetptr++ = val;
+ 
+-	if ((octetptr - octet)==6)
+-	{
+-	   for(i=0;i<=6;i++)
+-	      addr[i]=octet[i];
++	if ((octetptr - octet)==6) {
++		for(i=0;i<=6;i++)
++			addr[i]=octet[i];
+ 	}
+-    else
++	else
+ 		return 1;
+ 
+ 	return 0;
+-
+ }
+ #endif
diff --git a/target/linux/coldfire/patches/048-m547x_8x_internal_rename.patch b/target/linux/coldfire/patches/048-m547x_8x_internal_rename.patch
new file mode 100644
index 0000000000..eda1df0ae6
--- /dev/null
+++ b/target/linux/coldfire/patches/048-m547x_8x_internal_rename.patch
@@ -0,0 +1,22 @@
+From 62c2649ed2362a5f0478df60d56ed35414ac81ea Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 13 Mar 2008 22:06:35 -0600
+Subject: [PATCH] Change internal name rigo to m548x_7x
+
+LTIBName: m547x-8x-internal-rename
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/head.S |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+--- a/arch/m68k/coldfire/head.S
++++ b/arch/m68k/coldfire/head.S
+@@ -53,7 +53,7 @@
+ #define __FINIT		.previous
+ #endif
+ 
+-/* JKM -- REVISE DOCS FOR RIGO and PHYS MAPPING */
++/* JKM -- REVISE DOCS FOR M547x_8x and PHYS MAPPING */
+ /*
+  * Setup ACR mappings to provide the following memory map:
+  *   Data
diff --git a/target/linux/coldfire/patches/049-mcfv4e_linker_bss_cleanup.patch b/target/linux/coldfire/patches/049-mcfv4e_linker_bss_cleanup.patch
new file mode 100644
index 0000000000..06a68aa584
--- /dev/null
+++ b/target/linux/coldfire/patches/049-mcfv4e_linker_bss_cleanup.patch
@@ -0,0 +1,72 @@
+From 4e16f08c800d57b986217e0d39d4a06b5bdf641d Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 19 Mar 2008 17:37:44 -0600
+Subject: [PATCH] Move BSS section in linker script and zero it on boot.
+
+To work with the latest round of toolchains the bss section
+in the linker script needed to be moved to the end (due to
+the linker thinking there were overlapping sections).
+
+The BSS section needs to be manually zeroed.
+
+LTIBName: mcfv4e-linker-bss-cleanup
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/head.S         |   11 +++++++++++
+ arch/m68k/coldfire/vmlinux-cf.lds |   11 ++++++++---
+ 2 files changed, 19 insertions(+), 3 deletions(-)
+
+--- a/arch/m68k/coldfire/head.S
++++ b/arch/m68k/coldfire/head.S
+@@ -321,6 +321,17 @@ ENTRY(__start)
+ 	movec   %d0, %acr3
+ 	nop
+ 
++#ifdef CONFIG_COLDFIRE
++/* zero bss */
++	lea	_sbss,%a0
++	lea	_ebss,%a1
++	clrl	%d0
++_loop_bss:
++	movel	%d0,(%a0)+
++	cmpl	%a0,%a1
++	bne	_loop_bss
++#endif
++
+ 	/* If you change the memory size to another value make a matching 
+ 	   change in paging_init(cf-mmu.c) to zones_size[]. */
+ 
+--- a/arch/m68k/coldfire/vmlinux-cf.lds
++++ b/arch/m68k/coldfire/vmlinux-cf.lds
+@@ -51,9 +51,6 @@ SECTIONS
+ 	CONSTRUCTORS
+   } :data
+ 
+-  .bss : AT(ADDR(.bss) - LOAD_OFFSET) {		/* BSS */
+-	*(.bss)
+-  }
+ 
+   . = ALIGN(16);
+   .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET ) {
+@@ -62,6 +59,8 @@ SECTIONS
+ 
+   _edata = .;			/* End of data section */
+ 
++  NOTES				/* support ld --build-id */
++
+   . = ALIGN(8192);		/* Initrd */
+   .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
+   	__init_begin = .;
+@@ -111,6 +110,12 @@ SECTIONS
+ 	*(.data.init_task)	/* The initial task and kernel stack */
+   }
+ 
++  _sbss = .;
++  .bss : AT(ADDR(.bss) - LOAD_OFFSET) {		/* BSS */
++	*(.bss)
++  }
++  _ebss = .;
++
+   _end = . ;
+ 
+   /* Sections to be discarded */
diff --git a/target/linux/coldfire/patches/050-mcfv4e_irq_magic_bit.patch b/target/linux/coldfire/patches/050-mcfv4e_irq_magic_bit.patch
new file mode 100644
index 0000000000..61d746b701
--- /dev/null
+++ b/target/linux/coldfire/patches/050-mcfv4e_irq_magic_bit.patch
@@ -0,0 +1,31 @@
+From 3487b77acbb12f4174f46237f942918651b23aa7 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 15 Apr 2008 17:14:55 -0600
+Subject: [PATCH] Fix setting low 31 interrupts to deal with magic bit 0
+ of the IMRL register.
+
+LTIBName: mcfv4e-irq-magic-bit
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/ints.c |    9 ++++++---
+ 1 files changed, 6 insertions(+), 3 deletions(-)
+
+--- a/arch/m68k/coldfire/ints.c
++++ b/arch/m68k/coldfire/ints.c
+@@ -420,10 +420,13 @@ void m547x_8x_irq_enable(unsigned int ir
+ 	}
+ #endif
+ 
+-	if (irq < 32)
+-		MCF_IMRL &= ~(1 << irq);
+-	else
++	if (irq < 32) {
++		/* *grumble* don't set low bit of IMRL */
++		MCF_IMRL &= (~(1 << irq) & 0xfffffffe);
++	}
++	else {
+ 		MCF_IMRH &= ~(1 << (irq - 32));
++	}
+ }
+ 
+ void m547x_8x_irq_disable(unsigned int irq)
diff --git a/target/linux/coldfire/patches/051-m547x_8x_mcdma_1.0.patch b/target/linux/coldfire/patches/051-m547x_8x_mcdma_1.0.patch
new file mode 100644
index 0000000000..817fb1b6cf
--- /dev/null
+++ b/target/linux/coldfire/patches/051-m547x_8x_mcdma_1.0.patch
@@ -0,0 +1,3726 @@
+From 6c9df5dff79b6d09d1a31681067e7fbd85285f80 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 30 Apr 2008 12:22:03 -0600
+Subject: [PATCH] Update MultiChannel DMA to code version 1.0.
+
+Changes since previous:
+- Updated FEC RX task to work around bug where it would not update
+  the RX buffer descriptors correctly and adjusted size accordingly.
+- Added flag MCD_TT_FLAGS_PI for use with DSPI on MCD547x/8x.
+- Fixed cleanup of paused tasks in MCD_killDma.
+- Cosmetic changes to cleanup MCD_dmaApi.c.
+
+LTIBName: m547x-8x-mcdma-1.0
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/Makefile       |    3 +-
+ arch/m68k/coldfire/dma.c          |  532 ----
+ arch/m68k/coldfire/m547x_8x-dma.c |  516 ++++
+ drivers/dma/MCD_dma.h             |  786 +++---
+ drivers/dma/MCD_dmaApi.c          |  417 ++--
+ drivers/dma/MCD_progCheck.h       |   45 +-
+ drivers/dma/MCD_tasks.c           | 4917 +++++++++++++++++++------------------
+ drivers/dma/MCD_tasksInit.c       |  402 ++--
+ drivers/dma/MCD_tasksInit.h       |   49 +-
+ 9 files changed, 3785 insertions(+), 3882 deletions(-)
+ delete mode 100644 arch/m68k/coldfire/dma.c
+ create mode 100644 arch/m68k/coldfire/m547x_8x-dma.c
+
+--- a/arch/m68k/coldfire/Makefile
++++ b/arch/m68k/coldfire/Makefile
+@@ -10,5 +10,4 @@ endif
+ 
+ obj-$(CONFIG_PCI)	+= pci.o mcf5445x-pci.o iomap.o
+ obj-$(CONFIG_M54455)	+= mcf5445x-devices.o
+-
+-obj-$(CONFIG_MCD_DMA)	+= dma.o
++obj-$(CONFIG_MCD_DMA)	+= m547x_8x-dma.o
+--- a/arch/m68k/coldfire/dma.c
++++ /dev/null
+@@ -1,532 +0,0 @@
+-#include <linux/kernel.h>
+-#include <linux/sched.h>
+-#include <linux/mm.h>
+-#include <linux/init.h>
+-#include <linux/interrupt.h>
+-#include <asm/io.h>
+-#include <asm/irq.h>
+-#include <asm/dma.h>
+-#include <asm/coldfire.h>
+-#include <asm/m5485sram.h>
+-#include <asm/mcfsim.h>
+-
+-
+-
+-void dma_interrupt_handler(int irq, void *dev_id, struct pt_regs *regs);
+-
+-/* 
+- * This global keeps track of which initiators have been
+- * used of the available assignments.  Initiators 0-15 are
+- * hardwired.  Initiators 16-31 are multiplexed and controlled
+- * via the Initiatior Mux Control Registe (IMCR).  The
+- * assigned requestor is stored with the associated initiator
+- * number.
+- */
+-static int used_reqs[32] = {
+-	DMA_ALWAYS, DMA_DSPI_RX, DMA_DSPI_TX, DMA_DREQ0,
+-	DMA_PSC0_RX, DMA_PSC0_TX, DMA_USBEP0, DMA_USBEP1,
+-	DMA_USBEP2, DMA_USBEP3, DMA_PCI_TX, DMA_PCI_RX,
+-	DMA_PSC1_RX, DMA_PSC1_TX, DMA_I2C_RX, DMA_I2C_TX,
+-	0, 0, 0, 0,
+-	0, 0, 0, 0,
+-	0, 0, 0, 0,
+-	0, 0, 0, 0
+-};
+-
+-/*
+- * This global keeps track of which channels have been assigned
+- * to tasks.  This methology assumes that no single initiator
+- * will be tied to more than one task/channel
+- */
+-static char used_channel[16] = {
+-	-1, -1, -1, -1, -1, -1, -1, -1,
+-	-1, -1, -1, -1, -1, -1, -1, -1
+-};
+-
+-unsigned int connected_channel[16] = {
+-	0, 0, 0, 0, 0, 0, 0, 0,
+-	0, 0, 0, 0, 0, 0, 0, 0
+-};
+-
+-/********************************************************************/
+-/*
+- * Attempt to enable the provided Initiator in the Initiator
+- * Mux Control Register
+- *
+- * Parameters:
+- *  initiator   Initiator identifier
+- *
+- * Return Value:
+- *  1   if unable to make the assignment
+- *  0   successful
+- */
+-int
+-dma_set_initiator(int initiator)
+-{
+-	switch (initiator) {	/*
+-				 * These initiators are always active 
+-				 */
+-	case DMA_ALWAYS:
+-	case DMA_DSPI_RX:
+-	case DMA_DSPI_TX:
+-	case DMA_DREQ0:
+-	case DMA_PSC0_RX:
+-	case DMA_PSC0_TX:
+-	case DMA_USBEP0:
+-	case DMA_USBEP1:
+-	case DMA_USBEP2:
+-	case DMA_USBEP3:
+-	case DMA_PCI_TX:
+-	case DMA_PCI_RX:
+-	case DMA_PSC1_RX:
+-	case DMA_PSC1_TX:
+-	case DMA_I2C_RX:
+-	case DMA_I2C_TX:
+-		break;
+-
+-	case DMA_FEC0_RX:
+-		MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC16(3))
+-		    | MCF_DMA_IMCR_SRC16_FEC0RX;
+-		used_reqs[16] = DMA_FEC0_RX;
+-		break;
+-
+-	case DMA_FEC0_TX:
+-		MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC17(3))
+-		    | MCF_DMA_IMCR_SRC17_FEC0TX;
+-		used_reqs[17] = DMA_FEC0_TX;
+-		break;
+-
+-	case DMA_FEC1_RX:
+-		MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC20(3))
+-		    | MCF_DMA_IMCR_SRC20_FEC1RX;
+-		used_reqs[20] = DMA_FEC1_RX;
+-		break;
+-
+-	case DMA_FEC1_TX:
+-		if (used_reqs[21] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC21(3))
+-			    | MCF_DMA_IMCR_SRC21_FEC1TX;
+-			used_reqs[21] = DMA_FEC1_TX;
+-		} else if (used_reqs[25] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC25(3))
+-			    | MCF_DMA_IMCR_SRC25_FEC1TX;
+-			used_reqs[25] = DMA_FEC1_TX;
+-		} else if (used_reqs[31] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3))
+-			    | MCF_DMA_IMCR_SRC31_FEC1TX;
+-			used_reqs[31] = DMA_FEC1_TX;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_DREQ1:
+-		if (used_reqs[29] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3))
+-			    | MCF_DMA_IMCR_SRC29_DREQ1;
+-			used_reqs[29] = DMA_DREQ1;
+-		} else if (used_reqs[21] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC21(3))
+-			    | MCF_DMA_IMCR_SRC21_DREQ1;
+-			used_reqs[21] = DMA_DREQ1;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_CTM0:
+-		if (used_reqs[24] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC24(3))
+-			    | MCF_DMA_IMCR_SRC24_CTM0;
+-			used_reqs[24] = DMA_CTM0;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_CTM1:
+-		if (used_reqs[25] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC25(3))
+-			    | MCF_DMA_IMCR_SRC25_CTM1;
+-			used_reqs[25] = DMA_CTM1;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_CTM2:
+-		if (used_reqs[26] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC26(3))
+-			    | MCF_DMA_IMCR_SRC26_CTM2;
+-			used_reqs[26] = DMA_CTM2;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_CTM3:
+-		if (used_reqs[27] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC27(3))
+-			    | MCF_DMA_IMCR_SRC27_CTM3;
+-			used_reqs[27] = DMA_CTM3;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_CTM4:
+-		if (used_reqs[28] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3))
+-			    | MCF_DMA_IMCR_SRC28_CTM4;
+-			used_reqs[28] = DMA_CTM4;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_CTM5:
+-		if (used_reqs[29] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3))
+-			    | MCF_DMA_IMCR_SRC29_CTM5;
+-			used_reqs[29] = DMA_CTM5;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_CTM6:
+-		if (used_reqs[30] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC30(3))
+-			    | MCF_DMA_IMCR_SRC30_CTM6;
+-			used_reqs[30] = DMA_CTM6;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_CTM7:
+-		if (used_reqs[31] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3))
+-			    | MCF_DMA_IMCR_SRC31_CTM7;
+-			used_reqs[31] = DMA_CTM7;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_USBEP4:
+-		if (used_reqs[26] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC26(3))
+-			    | MCF_DMA_IMCR_SRC26_USBEP4;
+-			used_reqs[26] = DMA_USBEP4;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_USBEP5:
+-		if (used_reqs[27] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC27(3))
+-			    | MCF_DMA_IMCR_SRC27_USBEP5;
+-			used_reqs[27] = DMA_USBEP5;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_USBEP6:
+-		if (used_reqs[28] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3))
+-			    | MCF_DMA_IMCR_SRC28_USBEP6;
+-			used_reqs[28] = DMA_USBEP6;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_PSC2_RX:
+-		if (used_reqs[28] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3))
+-			    | MCF_DMA_IMCR_SRC28_PSC2RX;
+-			used_reqs[28] = DMA_PSC2_RX;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_PSC2_TX:
+-		if (used_reqs[29] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3))
+-			    | MCF_DMA_IMCR_SRC29_PSC2TX;
+-			used_reqs[29] = DMA_PSC2_TX;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_PSC3_RX:
+-		if (used_reqs[30] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC30(3))
+-			    | MCF_DMA_IMCR_SRC30_PSC3RX;
+-			used_reqs[30] = DMA_PSC3_RX;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	case DMA_PSC3_TX:
+-		if (used_reqs[31] == 0) {
+-			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3))
+-			    | MCF_DMA_IMCR_SRC31_PSC3TX;
+-			used_reqs[31] = DMA_PSC3_TX;
+-		} else		/* No empty slots */
+-			return 1;
+-		break;
+-
+-	default:
+-		return 1;
+-	}
+-	return 0;
+-}
+-
+-/********************************************************************/
+-/*
+- * Return the initiator number for the given requestor
+- *
+- * Parameters:
+- *  requestor   Initiator/Requestor identifier
+- *
+- * Return Value:
+- *  The initiator number (0-31) if initiator has been assigned
+- *  0 (always initiator) otherwise
+- */
+-unsigned int
+-dma_get_initiator(int requestor)
+-{
+-	u32 i;
+-
+-	for (i = 0; i < sizeof (used_reqs); ++i) {
+-		if (used_reqs[i] == requestor)
+-			return i;
+-	}
+-	return 0;
+-}
+-
+-/********************************************************************/
+-/*
+- * Remove the given initiator from the active list
+- *
+- * Parameters:
+- *  requestor   Initiator/Requestor identifier
+- */
+-void
+-dma_remove_initiator(int requestor)
+-{
+-	u32 i;
+-
+-	for (i = 0; i < sizeof (used_reqs); ++i) {
+-		if (used_reqs[i] == requestor) {
+-			used_reqs[i] = -1;
+-			break;
+-		}
+-	}
+-}
+-
+-/********************************************************************/
+-/*
+- * Attempt to find an available channel for FEC and mark is as used
+- *
+- * Parameters:
+- *  requestor   Initiator/Requestor identifier
+- *
+- * Return Value:
+- *  First available channel (from 0 to 5) or -1 if they are all occupied
+- */
+-int
+-dma_set_channel_fec(int requestor)
+-{
+-	u32 i, t;
+-
+-#ifdef CONFIG_FEC_548x_ENABLE_FEC2
+-	t = 4;
+-#else
+-	t = 2;
+-#endif
+-
+-
+-
+-	for (i = 0; i < t ; ++i)
+-		if (used_channel[i] == -1) {
+-			used_channel[i] = requestor;
+-			return i;
+-		}
+-	/* All channels taken */
+-	return -1;
+-}
+-
+-/********************************************************************/
+-/*
+- * Attempt to find an available channel and mark is as used
+- *
+- * Parameters:
+- *  requestor   Initiator/Requestor identifier
+- *
+- * Return Value:
+- *  First available channel (from 6 to 15) or -1 if they are all occupied
+- */
+-int
+-dma_set_channel(int requestor)
+-{
+-	u32 i;
+-#ifdef CONFIG_NET_FEC2
+-	i = 4;
+-#else
+-	i = 2;
+-#endif				
+-
+-	for (; i < 16; ++i)
+-		if (used_channel[i] == -1) {
+-			used_channel[i] = requestor;
+-			return i;
+-		}
+-
+-	/* All channels taken */
+-	return -1;
+-}
+-
+-/********************************************************************/
+-/*
+- * Return the channel being initiated by the given requestor
+- *
+- * Parameters:
+- *  requestor   Initiator/Requestor identifier
+- */
+-int
+-dma_get_channel(int requestor)
+-{
+-	u32 i;
+-
+-	for (i = 0; i < sizeof (used_channel); ++i) {
+-		if (used_channel[i] == requestor)
+-			return i;
+-	}
+-	return -1;
+-}
+-
+-/********************************************************************/
+-/*
+- * Connects a channel with reference on your data 
+- *
+- * Parameters:
+- *  channel   channel number
+- *  reference addres of your data
+-  */
+-int
+-dma_connect(int channel, int address)
+-{
+-	if ((channel < 16) && (channel >= 0))
+-		connected_channel[channel] = address;
+-	else
+-		return -1;
+-	return 0;
+-}
+-
+-/********************************************************************/
+-/*
+- * Disconnects a channel with reference on your data 
+- *
+- * Parameters:
+- *  channel   channel number
+-*/
+-int
+-dma_disconnect(int channel)
+-{
+-	if ((channel < 16) && (channel >= 0))
+-		connected_channel[channel] = 0;
+-	else
+-		return -1;
+-	return 0;
+-}
+-
+-/********************************************************************/
+-/*
+- * Remove the channel being initiated by the given requestor from 
+- * the active list
+- *
+- * Parameters:
+- *  requestor   Initiator/Requestor identifier
+- */
+-void
+-dma_remove_channel(int requestor)
+-{
+-	u32 i;
+-
+-	for (i = 0; i < sizeof (used_channel); ++i) {
+-		if (used_channel[i] == requestor) {
+-			used_channel[i] = -1;
+-			break;
+-		}
+-	}
+-}
+-
+-/********************************************************************/
+-/* 
+- * This is the catch-all interrupt handler for the mult-channel DMA 
+- */
+-volatile u8 dma_iflag[16];
+-u32 tx = 0;
+-
+-void
+-dma_interrupt_handler(int irq, void *dev_id, struct pt_regs *regs)
+-{
+-	u32 i, interrupts/*, mask, temp*/;
+-
+-	/*
+-	 * Determine which interrupt(s) triggered by AND'ing the 
+-	 * pending interrupts with those that aren't masked.            
+-	 */
+-/*	mask = MCF_DMA_DIMR;
+-	MCF_DMA_DIMR = 0xffffffff;
+-*/
+-	interrupts = MCF_DMA_DIPR;
+-	MCF_DMA_DIPR |= interrupts;
+-//	temp = interrupts;
+-
+-	//MCF_DMA_DIPR = interrupts;
+-	for (i = 0; i < 16; ++i, interrupts >>= 1)
+-		if (interrupts & 0x1)
+-			if (connected_channel[i] != 0)
+-				((void (*)(void)) (connected_channel[i])) ();
+-
+-/*	MCF_DMA_DIPR |= temp;
+-	MCF_DMA_DIMR = mask;*/
+-}
+-
+-void
+-dma_remove_channel_by_number(int channel)
+-{
+-	if (channel < sizeof (used_channel) && channel >= 0)
+-		used_channel[channel] = -1;
+-}
+-
+-int __devinit
+-dma_init()
+-{
+-	int result;
+-	char *dma_version_str;
+-
+-	MCD_getVersion(&dma_version_str);
+-	printk("Initialize %s\n", dma_version_str);
+-
+-	if (request_irq
+-	    (64 + ISC_DMA, 
+-	     dma_interrupt_handler, 
+-	     IRQF_DISABLED, 
+-	     "MCD-DMA", 
+-	     NULL)) {
+-		printk("Cannot allocate the DMA IRQ(48)\n");
+-		return 1;
+-	}
+-
+-	MCF_DMA_DIMR = 0;
+-	MCF_DMA_DIPR = 0xFFFFFFFF;
+-
+-	MCF_ICR(ISC_DMA) = ILP_DMA;
+-
+-	result = MCD_initDma((dmaRegs *) (MCF_MBAR + 0x8000),
+-			(void *) SYS_SRAM_DMA_START, MCD_RELOC_TASKS);
+-	if (result != MCD_OK) {
+-		printk("Cannot perform DMA initialization\n");
+-		free_irq(64 + ISC_DMA, NULL);
+-		return 1;
+-	}
+-
+-	return 0;
+-}
+-
+-device_initcall(dma_init);
+-
+--- /dev/null
++++ b/arch/m68k/coldfire/m547x_8x-dma.c
+@@ -0,0 +1,516 @@
++/*
++ * arch/m68k/coldfire/m547x_8x-dma.c
++ *
++ * Coldfire M547x/M548x DMA
++ *
++ * Copyright (c) 2008 Freescale Semiconductor, Inc.
++ *	Kurt Mahan <kmahan@freescale.com>
++ *
++ * This code is based on patches from the Freescale M547x_8x BSP
++ * release mcf547x_8x-20070107-ltib.iso
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/mm.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/dma.h>
++#include <asm/coldfire.h>
++#include <asm/m5485sram.h>
++#include <asm/mcfsim.h>
++
++/*
++ * This global keeps track of which initiators have been
++ * used of the available assignments.  Initiators 0-15 are
++ * hardwired.  Initiators 16-31 are multiplexed and controlled
++ * via the Initiatior Mux Control Registe (IMCR).  The
++ * assigned requestor is stored with the associated initiator
++ * number.
++ */
++static int used_reqs[32] = {
++	DMA_ALWAYS, DMA_DSPI_RX, DMA_DSPI_TX, DMA_DREQ0,
++	DMA_PSC0_RX, DMA_PSC0_TX, DMA_USBEP0, DMA_USBEP1,
++	DMA_USBEP2, DMA_USBEP3, DMA_PCI_TX, DMA_PCI_RX,
++	DMA_PSC1_RX, DMA_PSC1_TX, DMA_I2C_RX, DMA_I2C_TX,
++	0, 0, 0, 0,
++	0, 0, 0, 0,
++	0, 0, 0, 0,
++	0, 0, 0, 0
++};
++
++/*
++ * This global keeps track of which channels have been assigned
++ * to tasks.  This methology assumes that no single initiator
++ * will be tied to more than one task/channel
++ */
++static char used_channel[16] = {
++	-1, -1, -1, -1, -1, -1, -1, -1,
++	-1, -1, -1, -1, -1, -1, -1, -1
++};
++
++unsigned int connected_channel[16] = {
++	0, 0, 0, 0, 0, 0, 0, 0,
++	0, 0, 0, 0, 0, 0, 0, 0
++};
++
++/**
++ * dma_set_initiator - enable initiator
++ * @initiator: initiator identifier
++ *
++ * Returns 0 of successful, non-zero otherwise
++ *
++ * Attempt to enable the provided Initiator in the Initiator
++ * Mux Control Register.
++ */
++int dma_set_initiator(int initiator)
++{
++	switch (initiator) {
++	case DMA_ALWAYS:
++	case DMA_DSPI_RX:
++	case DMA_DSPI_TX:
++	case DMA_DREQ0:
++	case DMA_PSC0_RX:
++	case DMA_PSC0_TX:
++	case DMA_USBEP0:
++	case DMA_USBEP1:
++	case DMA_USBEP2:
++	case DMA_USBEP3:
++	case DMA_PCI_TX:
++	case DMA_PCI_RX:
++	case DMA_PSC1_RX:
++	case DMA_PSC1_TX:
++	case DMA_I2C_RX:
++	case DMA_I2C_TX:
++		/*
++		 * These initiators are always active
++		 */
++		break;
++
++	case DMA_FEC0_RX:
++		MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC16(3))
++		    | MCF_DMA_IMCR_SRC16_FEC0RX;
++		used_reqs[16] = DMA_FEC0_RX;
++		break;
++
++	case DMA_FEC0_TX:
++		MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC17(3))
++		    | MCF_DMA_IMCR_SRC17_FEC0TX;
++		used_reqs[17] = DMA_FEC0_TX;
++		break;
++
++	case DMA_FEC1_RX:
++		MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC20(3))
++		    | MCF_DMA_IMCR_SRC20_FEC1RX;
++		used_reqs[20] = DMA_FEC1_RX;
++		break;
++
++	case DMA_FEC1_TX:
++		if (used_reqs[21] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC21(3))
++			    | MCF_DMA_IMCR_SRC21_FEC1TX;
++			used_reqs[21] = DMA_FEC1_TX;
++		} else if (used_reqs[25] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC25(3))
++			    | MCF_DMA_IMCR_SRC25_FEC1TX;
++			used_reqs[25] = DMA_FEC1_TX;
++		} else if (used_reqs[31] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3))
++			    | MCF_DMA_IMCR_SRC31_FEC1TX;
++			used_reqs[31] = DMA_FEC1_TX;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_DREQ1:
++		if (used_reqs[29] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3))
++			    | MCF_DMA_IMCR_SRC29_DREQ1;
++			used_reqs[29] = DMA_DREQ1;
++		} else if (used_reqs[21] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC21(3))
++			    | MCF_DMA_IMCR_SRC21_DREQ1;
++			used_reqs[21] = DMA_DREQ1;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM0:
++		if (used_reqs[24] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC24(3))
++			    | MCF_DMA_IMCR_SRC24_CTM0;
++			used_reqs[24] = DMA_CTM0;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM1:
++		if (used_reqs[25] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC25(3))
++			    | MCF_DMA_IMCR_SRC25_CTM1;
++			used_reqs[25] = DMA_CTM1;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM2:
++		if (used_reqs[26] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC26(3))
++			    | MCF_DMA_IMCR_SRC26_CTM2;
++			used_reqs[26] = DMA_CTM2;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM3:
++		if (used_reqs[27] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC27(3))
++			    | MCF_DMA_IMCR_SRC27_CTM3;
++			used_reqs[27] = DMA_CTM3;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM4:
++		if (used_reqs[28] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3))
++			    | MCF_DMA_IMCR_SRC28_CTM4;
++			used_reqs[28] = DMA_CTM4;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM5:
++		if (used_reqs[29] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3))
++			    | MCF_DMA_IMCR_SRC29_CTM5;
++			used_reqs[29] = DMA_CTM5;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM6:
++		if (used_reqs[30] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC30(3))
++			    | MCF_DMA_IMCR_SRC30_CTM6;
++			used_reqs[30] = DMA_CTM6;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_CTM7:
++		if (used_reqs[31] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3))
++			    | MCF_DMA_IMCR_SRC31_CTM7;
++			used_reqs[31] = DMA_CTM7;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_USBEP4:
++		if (used_reqs[26] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC26(3))
++			    | MCF_DMA_IMCR_SRC26_USBEP4;
++			used_reqs[26] = DMA_USBEP4;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_USBEP5:
++		if (used_reqs[27] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC27(3))
++			    | MCF_DMA_IMCR_SRC27_USBEP5;
++			used_reqs[27] = DMA_USBEP5;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_USBEP6:
++		if (used_reqs[28] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3))
++			    | MCF_DMA_IMCR_SRC28_USBEP6;
++			used_reqs[28] = DMA_USBEP6;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_PSC2_RX:
++		if (used_reqs[28] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3))
++			    | MCF_DMA_IMCR_SRC28_PSC2RX;
++			used_reqs[28] = DMA_PSC2_RX;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_PSC2_TX:
++		if (used_reqs[29] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3))
++			    | MCF_DMA_IMCR_SRC29_PSC2TX;
++			used_reqs[29] = DMA_PSC2_TX;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_PSC3_RX:
++		if (used_reqs[30] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC30(3))
++			    | MCF_DMA_IMCR_SRC30_PSC3RX;
++			used_reqs[30] = DMA_PSC3_RX;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	case DMA_PSC3_TX:
++		if (used_reqs[31] == 0) {
++			MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3))
++			    | MCF_DMA_IMCR_SRC31_PSC3TX;
++			used_reqs[31] = DMA_PSC3_TX;
++		} else		/* No empty slots */
++			return 1;
++		break;
++
++	default:
++		return 1;
++	}
++	return 0;
++}
++
++/**
++ * dma_get_initiator - get the initiator for the given requestor
++ * @requestor: initiator identifier
++ *
++ * Returns initiator number (0-31) if assigned or just 0
++ */
++unsigned int dma_get_initiator(int requestor)
++{
++	u32 i;
++
++	for (i = 0; i < sizeof(used_reqs); ++i) {
++		if (used_reqs[i] == requestor)
++			return i;
++	}
++	return 0;
++}
++
++/**
++ * dma_remove_initiator - remove the given initiator from active list
++ * @requestor: requestor to remove
++ */
++void dma_remove_initiator(int requestor)
++{
++	u32 i;
++
++	for (i = 0; i < sizeof(used_reqs); ++i) {
++		if (used_reqs[i] == requestor) {
++			used_reqs[i] = -1;
++			break;
++		}
++	}
++}
++
++/**
++ * dma_set_channel_fec: find available channel for fec and mark
++ * @requestor: initiator/requestor identifier
++ *
++ * Returns first avaialble channel (0-5) or -1 if all occupied
++ */
++int dma_set_channel_fec(int requestor)
++{
++	u32 i, t;
++
++#ifdef CONFIG_FEC_548x_ENABLE_FEC2
++	t = 4;
++#else
++	t = 2;
++#endif
++
++	for (i = 0; i < t ; ++i) {
++		if (used_channel[i] == -1) {
++			used_channel[i] = requestor;
++			return i;
++		}
++	}
++	/* All channels taken */
++	return -1;
++}
++
++/**
++ * dma_set_channel - find an available channel and mark as used
++ * @requestor: initiator/requestor identifier
++ *
++ * Returns first available channel (6-15) or -1 if all occupied
++ */
++int dma_set_channel(int requestor)
++{
++	u32 i;
++#ifdef CONFIG_NET_FEC2
++	i = 4;
++#else
++	i = 2;
++#endif
++
++	for (; i < 16; ++i)
++		if (used_channel[i] == -1) {
++			used_channel[i] = requestor;
++			return i;
++		}
++
++	/* All channels taken */
++	return -1;
++}
++
++/**
++ * dma_get_channel - get the channel being initiated by the requestor
++ * @requestor: initiator/requestor identifier
++ *
++ * Returns Initiator for requestor or -1 if not found
++ */
++int dma_get_channel(int requestor)
++{
++	u32 i;
++
++	for (i = 0; i < sizeof(used_channel); ++i) {
++		if (used_channel[i] == requestor)
++			return i;
++	}
++	return -1;
++}
++
++/**
++ * dma_connect - connect a channel with reference on data
++ * @channel: channel number
++ * @address: reference address of data
++ *
++ * Returns 0 if success or -1 if invalid channel
++ */
++int dma_connect(int channel, int address)
++{
++	if ((channel < 16) && (channel >= 0)) {
++		connected_channel[channel] = address;
++		return 0;
++	}
++	return -1;
++}
++
++/**
++ * dma_disconnect - disconnect a channel
++ * @channel: channel number
++ *
++ * Returns 0 if success or -1 if invalid channel
++ */
++int dma_disconnect(int channel)
++{
++	if ((channel < 16) && (channel >= 0)) {
++		connected_channel[channel] = 0;
++		return 0;
++	}
++	return -1;
++}
++
++/**
++ * dma_remove_channel - remove channel from the active list
++ * @requestor: initiator/requestor identifier
++ */
++void dma_remove_channel(int requestor)
++{
++	u32 i;
++
++	for (i = 0; i < sizeof(used_channel); ++i) {
++		if (used_channel[i] == requestor) {
++			used_channel[i] = -1;
++			break;
++		}
++	}
++}
++
++/**
++ * dma_interrupt_handler - dma interrupt handler
++ * @irq: interrupt number
++ * @dev_id: data
++ *
++ * Returns IRQ_HANDLED
++ */
++irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
++{
++	u32 i, interrupts;
++
++	/*
++	 * Determine which interrupt(s) triggered by AND'ing the
++	 * pending interrupts with those that aren't masked.
++	 */
++	interrupts = MCF_DMA_DIPR;
++	MCF_DMA_DIPR |= interrupts;
++
++	for (i = 0; i < 16; ++i, interrupts >>= 1) {
++		if (interrupts & 0x1)
++			if (connected_channel[i] != 0)
++				((void (*)(void)) (connected_channel[i])) ();
++	}
++
++	return IRQ_HANDLED;
++}
++
++/**
++ * dma_remove_channel_by_number - clear dma channel
++ * @channel: channel number to clear
++ */
++void dma_remove_channel_by_number(int channel)
++{
++	if ((channel < sizeof(used_channel)) && (channel >= 0))
++		used_channel[channel] = -1;
++}
++
++/**
++ * dma_init - initialize the dma subsystem
++ *
++ * Returns 0 if success non-zero if failure
++ *
++ * Handles the DMA initialization during device setup.
++ */
++int __devinit dma_init()
++{
++	int result;
++	char *dma_version_str;
++
++	MCD_getVersion(&dma_version_str);
++	printk(KERN_INFO "m547x_8x DMA: Initialize %s\n", dma_version_str);
++
++	/* attempt to setup dma interrupt handler */
++	if (request_irq(64 + ISC_DMA, dma_interrupt_handler, IRQF_DISABLED,
++			"MCD-DMA", NULL)) {
++		printk(KERN_ERR "MCD-DMA: Cannot allocate the DMA IRQ(48)\n");
++		return 1;
++	}
++
++	MCF_DMA_DIMR = 0;
++	MCF_DMA_DIPR = 0xFFFFFFFF;
++
++	MCF_ICR(ISC_DMA) = ILP_DMA;
++
++	result = MCD_initDma((dmaRegs *) (MCF_MBAR + 0x8000),
++			(void *) SYS_SRAM_DMA_START, MCD_RELOC_TASKS);
++	if (result != MCD_OK) {
++		printk(KERN_ERR "MCD-DMA: Cannot perform DMA initialization\n");
++		free_irq(64 + ISC_DMA, NULL);
++		return 1;
++	}
++
++	return 0;
++}
++device_initcall(dma_init);
+--- a/drivers/dma/MCD_dma.h
++++ b/drivers/dma/MCD_dma.h
+@@ -1,45 +1,27 @@
+-/*********************************************************************
+- *
+- * Copyright (C) 2004  Motorola, Inc.
+- *  MOTOROLA, INC. All Rights Reserved.
+- *  You are hereby granted a copyright license to use
+- *  the SOFTWARE so long as this entire notice is
+- *  retained without alteration in any modified and/or redistributed
+- *  versions, and that such modified versions are clearly identified
+- *  as such. No licenses are granted by implication, estoppel or
+- *  otherwise under any patents or trademarks of Motorola, Inc. This
+- *  software is provided on an "AS IS" basis and without warranty.
++/*
++ * drivers/dma/MCD_dma.h
+  *
+- *  To the maximum extent permitted by applicable law, MOTOROLA
+- *  DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING
+- *  IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
+- *  PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE
+- *  SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY
+- *  ACCOMPANYING WRITTEN MATERIALS.
++ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
++ *     Kurt Mahan <kmahan@freescale.com>
+  *
+- *  To the maximum extent permitted by applicable law, IN NO EVENT
+- *  SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING
+- *  WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
+- *  INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY
+- *  LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
+  *
+- *  Motorola assumes no responsibility for the maintenance and support
+- *  of this software
+- ********************************************************************/
+-
+-/*
+- * File:        MCD_dma.h
+- * Purpose:     Main header file for multi-channel DMA API.
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
+  *
+- * Notes:
+- *
+- * Modifications:
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
+  */
+ #ifndef _MCD_API_H
+ #define _MCD_API_H
+ 
+-#include <asm/types.h>
+-
+ /*
+  * Turn Execution Unit tasks ON (#define) or OFF (#undef)
+  */
+@@ -79,26 +61,13 @@
+ /*
+  * Portability typedefs
+  */
+- /*
+-#ifndef s32
+ typedef int s32;
+-#endif
+-#ifndef u32
+ typedef unsigned int u32;
+-#endif
+-#ifndef s16
+ typedef short s16;
+-#endif
+-#ifndef u16
+ typedef unsigned short u16;
+-#endif
+-#ifndef s8
+ typedef char s8;
+-#endif
+-#ifndef u8
+ typedef unsigned char u8;
+-#endif
+-*/
++
+ /*
+  * These structures represent the internal registers of the
+  * multi-channel DMA
+@@ -233,6 +202,7 @@ typedef volatile struct dmaRegs_s dmaReg
+ #define MCD_TT_FLAGS_RL   0x00000001 /* Read line */
+ #define MCD_TT_FLAGS_CW   0x00000002 /* Combine Writes */
+ #define MCD_TT_FLAGS_SP   0x00000004 /* Speculative prefetch(XLB) MCF547x/548x ONLY  */
++#define MCD_TT_FLAGS_PI   0x00000040 /* Precise Increment */
+ #define MCD_TT_FLAGS_MASK 0x000000ff
+ #define MCD_TT_FLAGS_DEF  (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW)
+ 
+--- a/drivers/dma/MCD_dmaApi.c
++++ b/drivers/dma/MCD_dmaApi.c
+@@ -1,46 +1,26 @@
+-/*********************************************************************
+- *
+- * Copyright (C) 2004  Motorola, Inc.
+- *  MOTOROLA, INC. All Rights Reserved.
+- *  You are hereby granted a copyright license to use
+- *  the SOFTWARE so long as this entire notice is
+- *  retained without alteration in any modified and/or redistributed
+- *  versions, and that such modified versions are clearly identified
+- *  as such. No licenses are granted by implication, estoppel or
+- *  otherwise under any patents or trademarks of Motorola, Inc. This
+- *  software is provided on an "AS IS" basis and without warranty.
+- *
+- *  To the maximum extent permitted by applicable law, MOTOROLA
+- *  DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING
+- *  IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
+- *  PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE
+- *  SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY
+- *  ACCOMPANYING WRITTEN MATERIALS.
+- *
+- *  To the maximum extent permitted by applicable law, IN NO EVENT
+- *  SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING
+- *  WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
+- *  INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY
+- *  LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
+- *
+- *  Motorola assumes no responsibility for the maintenance and support
+- *  of this software
+- ********************************************************************/
+-
+ /*
+- * File:        MCD_dmaApi.c
+- * Purpose:     Main C file for multi-channel DMA API.
+- *
+- * Notes:
++ * drivers/dma/MCD_dmaApi.c
+  *
++ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
++ *     Kurt Mahan <kmahan@freescale.com>
+  *
+- * Modifications:
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
+  *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
+  *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
+  */
+-#include <asm/types.h>
+-#include <asm/MCD_dma.h>
+-#include <asm/virtconvert.h>
++
++#include "MCD_dma.h"
+ #include "MCD_tasksInit.h"
+ #include "MCD_progCheck.h"
+ 
+@@ -148,7 +128,6 @@ MCD_bufDesc *MCD_relocBuffDesc;
+ 
+ /*
+  * Structure to remember which variant is on which channel
+- * TBD- need this?
+  */
+ typedef struct MCD_remVariants_struct MCD_remVariant;
+ struct MCD_remVariants_struct
+@@ -164,6 +143,7 @@ struct MCD_remVariants_struct
+  * Structure to remember the startDma parameters for each channel
+  */
+ MCD_remVariant MCD_remVariants;
++
+ /********************************************************************/
+ /*
+  * Function: MCD_initDma
+@@ -185,15 +165,14 @@ int MCD_initDma (dmaRegs *dmaBarAddr, vo
+     int i;
+     TaskTableEntry *entryPtr;
+ 
+-    /* setup the local pointer to register set */
++    /* Setup the local pointer to register set */
+     MCD_dmaBar = dmaBarAddr;
+ 
+-    /* do we need to move/create a task table */
++    /* Do we need to move/create a task table */
+     if ((flags & MCD_RELOC_TASKS) != 0)
+     {
+         int fixedSize;
+         u32 *fixedPtr;
+-        /*int *tablePtr = taskTableDest;TBD*/
+         int varTabsOffset, funcDescTabsOffset, contextSavesOffset;
+         int taskDescTabsOffset;
+         int taskTableSize, varTabsSize, funcDescTabsSize, contextSavesSize;
+@@ -201,7 +180,7 @@ int MCD_initDma (dmaRegs *dmaBarAddr, vo
+ 
+         int i;
+ 
+-        /* check if physical address is aligned on 512 byte boundary */
++        /* Check if physical address is aligned on 512 byte boundary */
+         if (((u32)taskTableDest & 0x000001ff) != 0)
+             return(MCD_TABLE_UNALIGNED);
+ 
+@@ -215,13 +194,12 @@ int MCD_initDma (dmaRegs *dmaBarAddr, vo
+          * - copy over model task table with the the actual task descriptor
+          *   tables
+          */
+-
+         taskTableSize = NCHANNELS * sizeof(TaskTableEntry);
+-        /* align variable tables to size */
++        /* Align variable tables to size */
+         varTabsOffset = taskTableSize + (u32)taskTableDest;
+         if ((varTabsOffset & (VAR_TAB_SIZE - 1)) != 0)
+             varTabsOffset = (varTabsOffset + VAR_TAB_SIZE) & (~VAR_TAB_SIZE);
+-        /* align function descriptor tables */
++        /* Align function descriptor tables */
+         varTabsSize = NCHANNELS * VAR_TAB_SIZE;
+         funcDescTabsOffset = varTabsOffset + varTabsSize;
+ 
+@@ -235,13 +213,13 @@ int MCD_initDma (dmaRegs *dmaBarAddr, vo
+         fixedSize = taskTableSize + varTabsSize + funcDescTabsSize +
+                     contextSavesSize;
+ 
+-        /* zero the thing out */
++        /* Zero the thing out */
+         fixedPtr = (u32 *)taskTableDest;
+         for (i = 0;i<(fixedSize/4);i++)
+             fixedPtr[i] = 0;
+ 
+         entryPtr = (TaskTableEntry*)MCD_taskTable;
+-        /* set up fixed pointers */
++        /* Set up fixed pointers */
+         for (i = 0; i < NCHANNELS; i++)
+         {
+             entryPtr[i].varTab = (u32)varTabsOffset; /* update ptr to local value */
+@@ -253,25 +231,25 @@ int MCD_initDma (dmaRegs *dmaBarAddr, vo
+ #endif
+             contextSavesOffset += CONTEXT_SAVE_SIZE;
+         }
+-        /* copy over the function descriptor table */
++        /* Copy over the function descriptor table */
+         for ( i = 0; i < FUNCDESC_TAB_NUM; i++)
+         {
+             MCD_memcpy((void*)(entryPtr[i].FDTandFlags & ~MCD_TT_FLAGS_MASK),
+                        (void*)MCD_funcDescTab0, FUNCDESC_TAB_SIZE);
+         }
+ 
+-        /* copy model task table to where the context saves stuff leaves off*/
++        /* Copy model task table to where the context save stuff leaves off */
+         MCD_modelTaskTable = (TaskTableEntry*)contextSavesOffset;
+ 
+         MCD_memcpy ((void*)MCD_modelTaskTable, (void*)MCD_modelTaskTableSrc,
+                     NUMOFVARIANTS * sizeof(TaskTableEntry));
+ 
+-        entryPtr = MCD_modelTaskTable; /* point to local version of
+-                                                            model task table */
++        /* Point to local version of model task table */
++        entryPtr = MCD_modelTaskTable;
+         taskDescTabsOffset = (u32)MCD_modelTaskTable +
+                             (NUMOFVARIANTS * sizeof(TaskTableEntry));
+ 
+-        /* copy actual task code and update TDT ptrs in local model task table */
++        /* Copy actual task code and update TDT ptrs in local model task table */
+         for (i = 0; i < NUMOFVARIANTS; i++)
+         {
+             taskDescTabSize = entryPtr[i].TDTend - entryPtr[i].TDTstart + 4;
+@@ -280,25 +258,29 @@ int MCD_initDma (dmaRegs *dmaBarAddr, vo
+             taskDescTabsOffset += taskDescTabSize;
+             entryPtr[i].TDTend = (u32)taskDescTabsOffset - 4;
+         }
+-#ifdef MCD_INCLUDE_EU /* Tack single DMA BDs onto end of code so API controls
+-                         where they are since DMA might write to them */        
++#ifdef MCD_INCLUDE_EU 
++        /* 
++         * Tack single DMA BDs onto end of code so API controls where
++         * they are since DMA might write to them 
++         */
+         MCD_relocBuffDesc = (MCD_bufDesc*)(entryPtr[NUMOFVARIANTS - 1].TDTend + 4);
+-#else /* DMA does not touch them so they can be wherever and we don't need to 
+-         waste SRAM on them */
++#else 
++        /* 
++         * DMA does not touch them so they can be wherever and we don't need to
++         * waste SRAM on them 
++         */
+         MCD_relocBuffDesc = MCD_singleBufDescs;
+ #endif
+     }
+     else
+     {
+-        /* point the would-be relocated task tables and the
+-        buffer descriptors to the ones the linker generated */
+-
++        /* 
++         * Point the would-be relocated task tables and the buffer descriptors
++         * to the ones the linker generated
++         */
+         if (((u32)MCD_realTaskTableSrc & 0x000001ff) != 0)
+             return(MCD_TABLE_UNALIGNED);
+ 
+-        /* need to add code to make sure that every thing else is aligned properly TBD*/
+-        /* this is problematic if we init more than once or after running tasks,
+-            need to add variable to see if we have aleady init'd */
+         entryPtr = MCD_realTaskTableSrc;
+         for (i = 0; i < NCHANNELS; i++)
+         {
+@@ -312,9 +294,7 @@ int MCD_initDma (dmaRegs *dmaBarAddr, vo
+         MCD_relocBuffDesc = MCD_singleBufDescs;
+     }
+ 
+-
+-    /* Make all channels as totally inactive, and remember them as such: */
+-
++    /* Make all channels inactive, and remember them as such: */
+     MCD_dmaBar->taskbar = (u32) MCD_taskTable;
+     for (i = 0;  i < NCHANNELS;  i++)
+     {
+@@ -323,13 +303,12 @@ int MCD_initDma (dmaRegs *dmaBarAddr, vo
+     }
+ 
+    /* Set up pausing mechanism to inactive state: */
+-    MCD_dmaBar->debugComp1 = 0;  /* no particular values yet for either comparator registers */
++    MCD_dmaBar->debugComp1 = 0;
+     MCD_dmaBar->debugComp2 = 0;
+     MCD_dmaBar->debugControl = DBG_CTL_DISABLE;
+     MCD_dmaBar->debugStatus = DBG_KILL_ALL_STAT;
+ 
+-    /* enable or disable commbus prefetch, really need an ifdef or
+-       something to keep from trying to set this in the 8220 */
++    /* Enable or disable commbus prefetch */
+     if ((flags & MCD_COMM_PREFETCH_EN) != 0)
+         MCD_dmaBar->ptdControl &= ~PTD_CTL_COMM_PREFETCH;
+     else
+@@ -354,8 +333,7 @@ int MCD_dmaStatus (int channel)
+ 
+     tcrValue = MCD_dmaBar->taskControl[channel];
+     if ((tcrValue & TASK_CTL_EN) == 0)
+-    {  /* nothing running */
+-        /* if last reported with task enabled */
++    {   /* Nothing running if last reported with task enabled */
+         if (   MCD_chStatus[channel] == MCD_RUNNING
+             || MCD_chStatus[channel] == MCD_IDLE)
+             MCD_chStatus[channel] = MCD_DONE;
+@@ -367,13 +345,12 @@ int MCD_dmaStatus (int channel)
+             || MCD_chStatus[channel] == MCD_IDLE)
+         {
+             MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT;
+-            /* This register is selected to know which initiator is
+-            actually asserted. */
++            /* Determine which initiator is asserted. */
+             if ((MCD_dmaBar->ptdDebug >> channel ) & 0x1 )
+                 MCD_chStatus[channel] = MCD_RUNNING;
+             else
+                 MCD_chStatus[channel] = MCD_IDLE;
+-        /* do not change the status if it is already paused. */
++            /* Do not change the status if it is already paused */
+         }
+     }
+     return MCD_chStatus[channel];
+@@ -414,67 +391,86 @@ int MCD_startDma (
+ 
+     if((channel < 0) || (channel >= NCHANNELS))
+         return(MCD_CHANNEL_INVALID);
+-        
+-    /* tbd - need to determine the proper response to a bad funcDesc when not 
+-       including EU functions, for now, assign a benign funcDesc, but maybe
+-       should return an error */
++
+ #ifndef MCD_INCLUDE_EU
+     funcDesc = MCD_FUNC_NOEU1;
+ #endif
+-        
++
+ #ifdef MCD_DEBUG
+ printf("startDma:Setting up params\n");
+ #endif
+-   /* Set us up for task-wise priority.  We don't technically need to do this on every start, but
+-      since the register involved is in the same longword as other registers that users are in control
+-      of, setting it more than once is probably preferable.  That since the documentation doesn't seem
+-      to be completely consistent about the nature of the PTD control register. */
++
++   /* Enable task-wise priority */
+     MCD_dmaBar->ptdControl |= (u16) 0x8000;
+-#if 1 /* Not sure what we need to keep here rtm TBD */
++
+     /* Calculate additional parameters to the regular DMA calls. */
+     srcRsdIncr = srcIncr < 0 ? -1 : (srcIncr > 0 ? 1 : 0);
+     destRsdIncr = destIncr < 0 ? -1 : (destIncr > 0 ? 1 : 0);
+-
+     xferSizeIncr = (xferSize & 0xffff) | 0x20000000;
+ 
+-    /* Remember for each channel which variant is running. */
++    /* Remember which variant is running for each channel */
+     MCD_remVariants.remSrcRsdIncr[channel] = srcRsdIncr;
+     MCD_remVariants.remDestRsdIncr[channel] = destRsdIncr;
+     MCD_remVariants.remDestIncr[channel] = destIncr;
+     MCD_remVariants.remSrcIncr[channel] = srcIncr;
+     MCD_remVariants.remXferSize[channel] = xferSize;
+-#endif
+ 
+-    cSave = (int*)(MCD_taskTable[channel].contextSaveSpace) + CSAVE_OFFSET + CURRBD;
++    cSave = (int*)(MCD_taskTable[channel].contextSaveSpace) 
++            + CSAVE_OFFSET 
++            + CURRBD;
+ 
+-#ifdef MCD_INCLUDE_EU /* may move this to EU specific calls */
++#ifdef MCD_INCLUDE_EU
+     realFuncArray = (u32 *) (MCD_taskTable[channel].FDTandFlags & 0xffffff00);
+-    /* Modify the LURC's normal and byte-residue-loop functions according to parameter. */
+-    realFuncArray[(LURC*16)] = xferSize == 4 ?
+-                                 funcDesc : xferSize == 2 ?
+-                                     funcDesc & 0xfffff00f : funcDesc & 0xffff000f;
+-    realFuncArray[(LURC*16+1)] = (funcDesc & MCD_BYTE_SWAP_KILLER) | MCD_NO_BYTE_SWAP_ATALL;
+-#endif
+-   /* Write the initiator field in the TCR, and also set the initiator-hold
+-      bit.  Note that,due to a hardware quirk, this could collide with an
+-      MDE access to the initiator-register file, so we have to verify that the write
+-      reads back correctly. */
+ 
+-    MCD_dmaBar->taskControl[channel] =
+-        (initiator << 8) | TASK_CTL_HIPRITSKEN | TASK_CTL_HLDINITNUM;
++    /* 
++     * Modify the LURC's normal and byte-residue-loop functions 
++     * according to parameter. 
++     */
++    switch (xferSize)
++    {
++        case 4:
++            realFuncArray[(LURC*16)] = funcDesc;
++            break;
++        case 2:
++            realFuncArray[(LURC*16)] = funcDesc & 0xfffff00f;
++            break;
++        case 1:
++        default:
++            realFuncArray[(LURC*16)] = funcDesc & 0xffff000f;
++            break;
++    }
+ 
++    realFuncArray[(LURC*16+1)] = 0
++        | (funcDesc & MCD_BYTE_SWAP_KILLER) 
++        | MCD_NO_BYTE_SWAP_ATALL;
++#endif
++
++   /* Write the initiator field in the TCR and set the initiator-hold bit*/
++    MCD_dmaBar->taskControl[channel] = 0
++        | (initiator << 8)
++        | TASK_CTL_HIPRITSKEN
++        | TASK_CTL_HLDINITNUM;
++
++    /* 
++     * Current versions of the MPC8220 MCD have a hardware quirk that could
++     * cause the write to the TCR to collide with an MDE access to the 
++     * initiator-register file, so we have to verify that the write occurred
++     * correctly by reading back the value.  On MCF547x/8x devices and any
++     * future revisions of the MPC8220, this loop will not be entered.
++     */
+     while(((MCD_dmaBar->taskControl[channel] & 0x1fff) !=
+           ((initiator << 8) | TASK_CTL_HIPRITSKEN | TASK_CTL_HLDINITNUM)) &&
+             (tcrCount < 1000))
+     {
+         tcrCount++;
+-        /*MCD_dmaBar->ptd_tcr[channel] = (initiator << 8) | 0x0020;*/
+-        MCD_dmaBar->taskControl[channel] =
+-            (initiator << 8) | TASK_CTL_HIPRITSKEN | TASK_CTL_HLDINITNUM;
++        MCD_dmaBar->taskControl[channel] = 0
++            | (initiator << 8)
++            | TASK_CTL_HIPRITSKEN
++            | TASK_CTL_HLDINITNUM;
+     }
+ 
+     MCD_dmaBar->priority[channel] = (u8)priority & PRIORITY_PRI_MASK;
+-    /* should be albe to handle this stuff with only one write to ts reg - tbd */
++
+     if (channel < 8 && channel >= 0)
+     {
+         MCD_dmaBar->taskSize0 &= ~(0xf << (7-channel)*4);
+@@ -488,7 +484,7 @@ printf("startDma:Setting up params\n");
+         MCD_dmaBar->taskSize1 |= (xferSize & 3) << ((15 - channel)*4);
+     }
+ 
+-    /* setup task table flags/options which mostly control the line buffers */
++    /* Setup task table flags/options */
+     MCD_taskTable[channel].FDTandFlags &= ~MCD_TT_FLAGS_MASK;
+     MCD_taskTable[channel].FDTandFlags |= (MCD_TT_FLAGS_MASK & flags);
+ 
+@@ -508,79 +504,86 @@ printf("startDma:Setting up params\n");
+     }
+     else if(flags & MCD_SINGLE_DMA)
+     {
+-        /* this buffer descriptor is used for storing off initial parameters for later
+-           progress query calculation and for the DMA to write the resulting checksum
+-           The DMA does not use this to determine how to operate, that info is passed
+-           with the init routine*/
++        /* 
++         * This buffer descriptor is used for storing off initial parameters 
++         * for later progress query calculation and for the DMA to write the 
++         * resulting checksum. The DMA does not use this to determine how to 
++         * operate, that info is passed with the init routine
++         */
+         MCD_relocBuffDesc[channel].srcAddr = srcAddr;
+         MCD_relocBuffDesc[channel].destAddr = destAddr;
+-        MCD_relocBuffDesc[channel].lastDestAddr = destAddr;  /* definitely not its final value */
++        MCD_relocBuffDesc[channel].lastDestAddr = destAddr;
+         MCD_relocBuffDesc[channel].dmaSize = dmaSize;
+         MCD_relocBuffDesc[channel].flags = 0;       /* not used */
+         MCD_relocBuffDesc[channel].csumResult = 0;  /* not used */
+         MCD_relocBuffDesc[channel].next = 0;        /* not used */
+ 
+         /* Initialize the progress-querying stuff to show no progress:*/
+-        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET] = (int)srcAddr;
+-        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET] = (int)destAddr;
+-        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET] = 0;
+-        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET] =
+-                                             (u32) &(MCD_relocBuffDesc[channel]);
+-        /* tbd - need to keep the user from trying to call the EU routine
+-           when MCD_INCLUDE_EU is not defined */
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET] 
++            = (int)srcAddr;
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET] 
++            = (int)destAddr;
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET] 
++            = 0;
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET] 
++            = (u32) &(MCD_relocBuffDesc[channel]);
++
+         if( funcDesc == MCD_FUNC_NOEU1 || funcDesc == MCD_FUNC_NOEU2)
+         {
+-           /* TDTStart and TDTEnd */
+-           MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_SINGLENOEU].TDTstart;
+-           MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_SINGLENOEU].TDTend;
+-           MCD_startDmaSingleNoEu(srcAddr, srcIncr, destAddr, destIncr, dmaSize, dmaSize,
+-                                xferSizeIncr, flags, (int *)&(MCD_relocBuffDesc[channel]), cSave,
+-                                MCD_taskTable, channel);
++            /* TDTStart and TDTEnd */
++            MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_SINGLENOEU].TDTstart;
++            MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_SINGLENOEU].TDTend;
++            MCD_startDmaSingleNoEu(srcAddr, srcIncr, destAddr, destIncr, dmaSize,
++                                xferSizeIncr, flags, (int *)&(MCD_relocBuffDesc[channel]), 
++                                cSave, MCD_taskTable, channel);
+         }
+         else
+         {
+-           /* TDTStart and TDTEnd */
+-           MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_SINGLEEU].TDTstart;
+-           MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_SINGLEEU].TDTend;
+-           MCD_startDmaSingleEu(srcAddr, srcIncr, destAddr, destIncr, dmaSize, dmaSize,
+-                              xferSizeIncr, flags, (int *)&(MCD_relocBuffDesc[channel]), cSave,
+-                              MCD_taskTable, channel);
++            /* TDTStart and TDTEnd */
++            MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_SINGLEEU].TDTstart;
++            MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_SINGLEEU].TDTend;
++            MCD_startDmaSingleEu(srcAddr, srcIncr, destAddr, destIncr, dmaSize,
++                                xferSizeIncr, flags, (int *)&(MCD_relocBuffDesc[channel]), 
++                                cSave, MCD_taskTable, channel);
+         }
+     }
+-    else
+-    { /* chained DMAS */
++    else /* Chained DMA */
++    {
+         /* Initialize the progress-querying stuff to show no progress:*/
+ #if 1 /* (!defined(MCD_NEED_ADDR_TRANS)) */
+         ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET]
+-          = (int)((MCD_bufDesc*) phys_to_virt(srcAddr))->srcAddr;
++            = (int)((MCD_bufDesc*) srcAddr)->srcAddr;
+         ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET]
+-          = (int)((MCD_bufDesc*) phys_to_virt(srcAddr))->destAddr;
++            = (int)((MCD_bufDesc*) srcAddr)->destAddr;
+ #else /* if using address translation, need the virtual addr of the first buffdesc */
+         ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET]
+           = (int)((MCD_bufDesc*) srcAddrVirt)->srcAddr;
+         ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET]
+           = (int)((MCD_bufDesc*) srcAddrVirt)->destAddr;
+ #endif
+-        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET] = 0;
+-        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET] = (u32) srcAddr;
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET] 
++          = 0;
++        ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET] 
++          = (u32) srcAddr;
+ 
+         if( funcDesc == MCD_FUNC_NOEU1 || funcDesc == MCD_FUNC_NOEU2)
+         {
+-          /*TDTStart and TDTEnd*/
+-          MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_CHAINNOEU].TDTstart;
+-          MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_CHAINNOEU].TDTend;
+-          MCD_startDmaChainNoEu((int *)srcAddr, srcIncr, destIncr, xferSize,
++            /* TDTStart and TDTEnd */
++            MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_CHAINNOEU].TDTstart;
++            MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_CHAINNOEU].TDTend;
++            MCD_startDmaChainNoEu((int *)srcAddr, srcIncr, destIncr, xferSize,
+                                     xferSizeIncr, cSave, MCD_taskTable, channel);
+         }
+         else
+         {
+-          /*TDTStart and TDTEnd*/
+-          MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_CHAINEU].TDTstart;
+-          MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_CHAINEU].TDTend;
+-          MCD_startDmaChainEu((int *)srcAddr, srcIncr, destIncr, xferSize,
++            /* TDTStart and TDTEnd */
++            MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_CHAINEU].TDTstart;
++            MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_CHAINEU].TDTend;
++            MCD_startDmaChainEu((int *)srcAddr, srcIncr, destIncr, xferSize,
+                                  xferSizeIncr, cSave, MCD_taskTable, channel);
+         }
+     }
++
+     MCD_chStatus[channel] = MCD_IDLE;
+     return(MCD_OK);
+ }
+@@ -597,7 +600,7 @@ printf("startDma:Setting up params\n");
+  * Notes:
+  *  MCD_XferProgrQuery() upon completing or after aborting a DMA, or
+  *  while the DMA is in progress, this function returns the first
+- *  DMA-destination address not (or not yet) used in the DMA. When 
++ *  DMA-destination address not (or not yet) used in the DMA. When
+  *  encountering a non-ready buffer descriptor, the information for
+  *  the last completed descriptor is returned.
+  *
+@@ -642,11 +645,13 @@ int MCD_XferProgrQuery (int channel, MCD
+     prevRep.dmaSize = ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET];
+     prevRep.currBufDesc =
+           (MCD_bufDesc*) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET];
++
+     /* Repeatedly reread those values until they match previous values: */
+     do {
+-        /* Waste a little bit of time to ensure stability: */
++        /* Take a little bit of time to ensure stability: */
+         for (i = 0;  i < STABTIME;  i++)
+-            i += i >> 2;  /* make sure this loop does something so that it doesn't get optimized out */
++            i += i >> 2;  /* make sure this loop does something so that it 
++                             doesn't get optimized out */
+         /* Check them again: */
+         progRep->lastSrcAddr =
+             (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET];
+@@ -655,31 +660,33 @@ int MCD_XferProgrQuery (int channel, MCD
+         progRep->dmaSize = ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET];
+         progRep->currBufDesc =
+             (MCD_bufDesc*) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET];
+-       /* See if they match: */
+-       if (   prevRep.lastSrcAddr != progRep->lastSrcAddr
+-           || prevRep.lastDestAddr != progRep->lastDestAddr
+-           || prevRep.dmaSize != progRep->dmaSize
+-           || prevRep.currBufDesc != progRep->currBufDesc)
+-       {
+-          /* If they don't match, remember previous values and try again:*/
+-          prevRep.lastSrcAddr = progRep->lastSrcAddr;
+-          prevRep.lastDestAddr = progRep->lastDestAddr;
+-          prevRep.dmaSize = progRep->dmaSize;
+-          prevRep.currBufDesc = progRep->currBufDesc;
+-          again = MCD_TRUE;
+-       }
+-       else
++
++        /* See if they match: */
++        if (   prevRep.lastSrcAddr  != progRep->lastSrcAddr
++            || prevRep.lastDestAddr != progRep->lastDestAddr
++            || prevRep.dmaSize      != progRep->dmaSize
++            || prevRep.currBufDesc  != progRep->currBufDesc)
++        {
++            /* If they don't match, remember previous values and try again:*/
++            prevRep.lastSrcAddr = progRep->lastSrcAddr;
++            prevRep.lastDestAddr = progRep->lastDestAddr;
++            prevRep.dmaSize = progRep->dmaSize;
++            prevRep.currBufDesc = progRep->currBufDesc;
++            again = MCD_TRUE;
++        }
++        else
+           again = MCD_FALSE;
+     } while (again == MCD_TRUE);
+ 
+ 
+-    /* Update the dCount, srcAddr and destAddr */
+-    /* To calculate dmaCount, we consider destination address. C
+-       overs M1,P1,Z for destination */
+-    switch(MCD_remVariants.remDestRsdIncr[channel]) {
++    /* Update dmaSize and lastDestAddr */
++    switch(MCD_remVariants.remDestRsdIncr[channel]) 
++    {
+         case MINUS1:
+-           subModVal = ((int)progRep->lastDestAddr) & ((MCD_remVariants.remXferSize[channel]) - 1);
+-           addModVal = ((int)progRep->currBufDesc->destAddr) & ((MCD_remVariants.remXferSize[channel]) - 1);
++           subModVal = ((int)progRep->lastDestAddr) 
++                        & ((MCD_remVariants.remXferSize[channel]) - 1);
++           addModVal = ((int)progRep->currBufDesc->destAddr) 
++                        & ((MCD_remVariants.remXferSize[channel]) - 1);
+            LWAlignedInitDestAddr = (progRep->currBufDesc->destAddr) - addModVal;
+            LWAlignedCurrDestAddr = (progRep->lastDestAddr) - subModVal;
+            destDiffBytes = LWAlignedInitDestAddr - LWAlignedCurrDestAddr;
+@@ -692,25 +699,28 @@ int MCD_XferProgrQuery (int channel, MCD
+            progRep->lastDestAddr = progRep->currBufDesc->destAddr;
+            break;
+         case PLUS1:
+-           /* This value has to be subtracted from the final calculated dCount. */
+-           subModVal = ((int)progRep->currBufDesc->destAddr) & ((MCD_remVariants.remXferSize[channel]) - 1);
++           /* This value has to be subtracted from the final calculated dmaSize. */
++            subModVal = ((int)progRep->currBufDesc->destAddr) 
++                        & ((MCD_remVariants.remXferSize[channel]) - 1);
+            /* These bytes are already in lastDestAddr. */
+-            addModVal = ((int)progRep->lastDestAddr) & ((MCD_remVariants.remXferSize[channel]) - 1);
++            addModVal = ((int)progRep->lastDestAddr) 
++                        & ((MCD_remVariants.remXferSize[channel]) - 1);
+             LWAlignedInitDestAddr = (progRep->currBufDesc->destAddr) - subModVal;
+             LWAlignedCurrDestAddr = (progRep->lastDestAddr) - addModVal;
+             destDiffBytes = (progRep->lastDestAddr - LWAlignedInitDestAddr);
+             numIterations = ( LWAlignedCurrDestAddr - LWAlignedInitDestAddr)/MCD_remVariants.remDestIncr[channel];
+             bytesNotXfered =  numIterations *
+-                ( MCD_remVariants.remDestIncr[channel]
+-                  - MCD_remVariants.remXferSize[channel]);
+-           progRep->dmaSize = destDiffBytes - bytesNotXfered - subModVal;
+-           break;
++                              (MCD_remVariants.remDestIncr[channel]
++                             - MCD_remVariants.remXferSize[channel]);
++            progRep->dmaSize = destDiffBytes - bytesNotXfered - subModVal;
++            break;
+         default:
+-           break;
++            break;
+     }
+ 
+     /* This covers M1,P1,Z for source */
+-    switch(MCD_remVariants.remSrcRsdIncr[channel]) {
++    switch(MCD_remVariants.remSrcRsdIncr[channel]) 
++    {
+         case MINUS1:
+             progRep->lastSrcAddr =
+                 progRep->currBufDesc->srcAddr +
+@@ -720,13 +730,14 @@ int MCD_XferProgrQuery (int channel, MCD
+         case ZERO:
+             progRep->lastSrcAddr = progRep->currBufDesc->srcAddr;
+             break;
+-       case PLUS1:
++        case PLUS1:
+             progRep->lastSrcAddr =
+                 progRep->currBufDesc->srcAddr +
+                  ( MCD_remVariants.remSrcIncr[channel] *
+                    (progRep->dmaSize/MCD_remVariants.remXferSize[channel]));
+-          break;
+-       default: break;
++            break;
++        default: 
++            break;
+     }
+ 
+     return(MCD_OK);
+@@ -744,8 +755,10 @@ static void MCD_resmActions (int channel
+ {
+    MCD_dmaBar->debugControl = DBG_CTL_DISABLE;
+    MCD_dmaBar->debugStatus = MCD_dmaBar->debugStatus;
+-   MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT; /* This register is selected to know
+-                                        which initiator is actually asserted. */
++
++   /* Determine which initiators are asserted */
++   MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT; 
++
+    if((MCD_dmaBar->ptdDebug >> channel ) & 0x1)
+        MCD_chStatus[channel] = MCD_RUNNING;
+    else
+@@ -767,27 +780,20 @@ static void MCD_resmActions (int channel
+  */
+ int MCD_killDma (int channel)
+ {
+-   /* MCD_XferProg progRep; */
+-
+     if((channel < 0) || (channel >= NCHANNELS))
+         return(MCD_CHANNEL_INVALID);
+ 
+     MCD_dmaBar->taskControl[channel] = 0x0;
+-    MCD_resumeDma (channel);
+-    /*
+-     * This must be after the write to the TCR so that the task doesn't
+-     * start up again momentarily, and before the status assignment so
+-     * as to override whatever MCD_resumeDma() may do to the channel
+-     * status.
+-     */
++    
++    /* Clean up after a paused task */
++    if (MCD_chStatus[channel] == MCD_PAUSED)
++    {
++        MCD_dmaBar->debugControl = DBG_CTL_DISABLE;
++        MCD_dmaBar->debugStatus = MCD_dmaBar->debugStatus;        
++    }
++     
+     MCD_chStatus[channel] = MCD_HALTED;
+ 
+-    /*
+-     * Update the current buffer descriptor's lastDestAddr field
+-     *
+-     * MCD_XferProgrQuery (channel, &progRep);
+-     * progRep.currBufDesc->lastDestAddr = progRep.lastDestAddr;
+-     */
+     return(MCD_OK);
+ }
+ /************************ End of MCD_killDma() **********************/
+@@ -843,7 +849,7 @@ int MCD_continDma (int channel)
+  * this means that bits 14 and 0 must enable debug functions before
+  * bits 1 and 2, respectively, have any effect.
+  *
+- * NOTE: It's extremely important to not pause more than one DMA channel 
++ * NOTE: It's extremely important to not pause more than one DMA channel
+  *  at a time.
+  ********************************************************************/
+ 
+@@ -856,8 +862,6 @@ int MCD_continDma (int channel)
+  */
+ int MCD_pauseDma (int channel)
+ {
+-    /* MCD_XferProg progRep; */
+-
+     if((channel < 0) || (channel >= NCHANNELS))
+         return(MCD_CHANNEL_INVALID);
+ 
+@@ -866,13 +870,6 @@ int MCD_pauseDma (int channel)
+         MCD_dmaBar->debugComp1 = channel;
+         MCD_dmaBar->debugControl = DBG_CTL_ENABLE | (1 << (channel + 16));
+         MCD_chStatus[channel] = MCD_PAUSED;
+-
+-        /*
+-         * Update the current buffer descriptor's lastDestAddr field
+-         *
+-         * MCD_XferProgrQuery (channel, &progRep);
+-         * progRep.currBufDesc->lastDestAddr = progRep.lastDestAddr;
+-         */
+     }
+     return(MCD_OK);
+ }
+@@ -929,9 +926,9 @@ int MCD_csumQuery (int channel, u32 *csu
+ int MCD_getCodeSize(void)
+ {
+ #ifdef MCD_INCLUDE_EU
+-    return(0x2b5c);
++    return(0x2b64);
+ #else
+-    return(0x173c);
++    return(0x1744);
+ #endif
+ }
+ /********************** End of MCD_getCodeSize() ********************/
+@@ -943,9 +940,9 @@ int MCD_getCodeSize(void)
+  *                    which points to the version string
+  * Returns:     Version number and version string (by reference)
+  */
+-char MCD_versionString[] = "Multi-channel DMA API Alpha v0.3 (2004-04-26)";
+-#define MCD_REV_MAJOR   0x00
+-#define MCD_REV_MINOR   0x03
++char MCD_versionString[] = "Multi-channel DMA API v1.0";
++#define MCD_REV_MAJOR   0x01
++#define MCD_REV_MINOR   0x00
+ 
+ int MCD_getVersion(char **longVersion)
+ {
+--- a/drivers/dma/MCD_progCheck.h
++++ b/drivers/dma/MCD_progCheck.h
+@@ -1,32 +1,27 @@
+-/*********************************************************************
++/*
++ * drivers/dma/MCD_progCheck.h
+  *
+- * Copyright (C) 2004  Motorola, Inc.
+- *  MOTOROLA, INC. All Rights Reserved.
+- *  You are hereby granted a copyright license to use
+- *  the SOFTWARE so long as this entire notice is
+- *  retained without alteration in any modified and/or redistributed
+- *  versions, and that such modified versions are clearly identified
+- *  as such. No licenses are granted by implication, estoppel or
+- *  otherwise under any patents or trademarks of Motorola, Inc. This
+- *  software is provided on an "AS IS" basis and without warranty.
++ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
++ *     Kurt Mahan <kmahan@freescale.com>
+  *
+- *  To the maximum extent permitted by applicable law, MOTOROLA
+- *  DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING
+- *  IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
+- *  PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE
+- *  SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY
+- *  ACCOMPANYING WRITTEN MATERIALS.
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
+  *
+- *  To the maximum extent permitted by applicable law, IN NO EVENT
+- *  SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING
+- *  WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
+- *  INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY
+- *  LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
+  *
+- *  Motorola assumes no responsibility for the maintenance and support
+- *  of this software
+- ********************************************************************/
+- /* This file is autogenerated. Do not change */
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/* This file is autogenerated. Do not change */
++
+ #define CURRBD 4
+ #define DCOUNT 6
+ #define DESTPTR 5
+--- a/drivers/dma/MCD_tasks.c
++++ b/drivers/dma/MCD_tasks.c
+@@ -1,44 +1,26 @@
+-/*********************************************************************
+- *
+- * Copyright (C) 2004  Motorola, Inc.
+- *  MOTOROLA, INC. All Rights Reserved.
+- *  You are hereby granted a copyright license to use
+- *  the SOFTWARE so long as this entire notice is
+- *  retained without alteration in any modified and/or redistributed
+- *  versions, and that such modified versions are clearly identified
+- *  as such. No licenses are granted by implication, estoppel or
+- *  otherwise under any patents or trademarks of Motorola, Inc. This
+- *  software is provided on an "AS IS" basis and without warranty.
+- *
+- *  To the maximum extent permitted by applicable law, MOTOROLA
+- *  DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING
+- *  IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
+- *  PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE
+- *  SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY
+- *  ACCOMPANYING WRITTEN MATERIALS.
+- *
+- *  To the maximum extent permitted by applicable law, IN NO EVENT
+- *  SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING
+- *  WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
+- *  INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY
+- *  LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
+- *
+- *  Motorola assumes no responsibility for the maintenance and support
+- *  of this software
+- ********************************************************************/
+ /*
+- * File:        MCD_tasks.c
+- * Purpose:     Contains task code and structures for Multi-channel DMA
+- *
+- * Notes:
++ * drivers/dma/MCD_tasks.c
+  *
++ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
++ *     Kurt Mahan <kmahan@freescale.com>
+  *
+- * Modifications:
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
+  *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
+  *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
+  */
+ 
+-#include <asm/MCD_dma.h>
++#include "MCD_dma.h"
+ 
+ u32 MCD_varTab0[];
+ u32 MCD_varTab1[];
+@@ -922,13 +904,13 @@ u32 MCD_funcDescTab0[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ 
+ #ifdef MCD_INCLUDE_EU
+@@ -991,13 +973,13 @@ u32 MCD_funcDescTab1[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ 
+ u32 MCD_funcDescTab2[]=
+@@ -1059,13 +1041,13 @@ u32 MCD_funcDescTab2[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ 
+ u32 MCD_funcDescTab3[]=
+@@ -1127,13 +1109,13 @@ u32 MCD_funcDescTab3[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ 
+ u32 MCD_funcDescTab4[]=
+@@ -1195,13 +1177,13 @@ u32 MCD_funcDescTab4[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ 
+ u32 MCD_funcDescTab5[]=
+@@ -1263,13 +1245,13 @@ u32 MCD_funcDescTab5[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ 
+ u32 MCD_funcDescTab6[]=
+@@ -1331,13 +1313,13 @@ u32 MCD_funcDescTab6[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ 
+ u32 MCD_funcDescTab7[]=
+@@ -1399,13 +1381,13 @@ u32 MCD_funcDescTab7[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ 
+ u32 MCD_funcDescTab8[]=
+@@ -1467,13 +1449,13 @@ u32 MCD_funcDescTab8[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ 
+ u32 MCD_funcDescTab9[]=
+@@ -1535,13 +1517,13 @@ u32 MCD_funcDescTab9[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ 
+ u32 MCD_funcDescTab10[]=
+@@ -1603,13 +1585,13 @@ u32 MCD_funcDescTab10[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ 
+ u32 MCD_funcDescTab11[]=
+@@ -1671,13 +1653,13 @@ u32 MCD_funcDescTab11[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ 
+ u32 MCD_funcDescTab12[]=
+@@ -1739,13 +1721,13 @@ u32 MCD_funcDescTab12[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ 
+ u32 MCD_funcDescTab13[]=
+@@ -1807,13 +1789,13 @@ u32 MCD_funcDescTab13[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ 
+ u32 MCD_funcDescTab14[]=
+@@ -1875,13 +1857,13 @@ u32 MCD_funcDescTab14[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ 
+ u32 MCD_funcDescTab15[]=
+@@ -1943,13 +1925,13 @@ u32 MCD_funcDescTab15[]=
+     0x20400000, /* add(), EU# 3 */
+     0x20500000, /* sub(), EU# 3 */
+     0x205a0000, /* andNot(), EU# 3 */
++    0x20a00000, /* shiftR(), EU# 3 */
+     0x202fa000, /* andReadyBit(), EU# 3 */
+     0x202f9000, /* andNotReadyBit(), EU# 3 */
+     0x202ea000, /* andWrapBit(), EU# 3 */
+-    0x202da000, /* andEndFrameBit(), EU# 3 */
++    0x202da000, /* andLastBit(), EU# 3 */
+     0x202e2000, /* andInterruptBit(), EU# 3 */
+-    0x202f2000, /* andLoopBit(), EU# 3 */
+-    0x2020a000, /* andCrcRestartBit(), EU# 3 */
++    0x202f2000, /* andCrcRestartBit(), EU# 3 */
+ };
+ #endif /*MCD_INCLUDE_EU*/
+ 
+@@ -1970,7 +1952,6 @@ u32 MCD_contextSave13[128]; /* Task 13 c
+ u32 MCD_contextSave14[128]; /* Task 14 context save space */
+ u32 MCD_contextSave15[128]; /* Task 15 context save space */
+ 
+-/* Task Descriptor Tables - the guts */
+ u32 MCD_ChainNoEu_TDT[];
+ u32 MCD_SingleNoEu_TDT[];
+ #ifdef MCD_INCLUDE_EU
+@@ -1983,7 +1964,7 @@ u32 MCD_ENetXmit_TDT[];
+ u32 MCD_modelTaskTableSrc[]=
+ {
+     (u32)MCD_ChainNoEu_TDT,
+-    (u32)&((u8*)MCD_ChainNoEu_TDT)[0x00000178],
++    (u32)&((u8*)MCD_ChainNoEu_TDT)[0x0000016c],
+     0x00000000,
+     0x00000000,
+     0x00000000,
+@@ -2000,7 +1981,7 @@ u32 MCD_modelTaskTableSrc[]=
+     0x00000000,
+ #ifdef MCD_INCLUDE_EU
+     (u32)MCD_ChainEu_TDT,
+-    (u32)&((u8*)MCD_ChainEu_TDT)[0x00000180],
++    (u32)&((u8*)MCD_ChainEu_TDT)[0x000001b4],
+     0x00000000,
+     0x00000000,
+     0x00000000,
+@@ -2008,7 +1989,7 @@ u32 MCD_modelTaskTableSrc[]=
+     0x00000000,
+     0x00000000,
+     (u32)MCD_SingleEu_TDT,
+-    (u32)&((u8*)MCD_SingleEu_TDT)[0x000000dc],
++    (u32)&((u8*)MCD_SingleEu_TDT)[0x00000124],
+     0x00000000,
+     0x00000000,
+     0x00000000,
+@@ -2017,7 +1998,7 @@ u32 MCD_modelTaskTableSrc[]=
+     0x00000000,
+ #endif
+     (u32)MCD_ENetRcv_TDT,
+-    (u32)&((u8*)MCD_ENetRcv_TDT)[0x0000009C],
++    (u32)&((u8*)MCD_ENetRcv_TDT)[0x000000a4],
+     0x00000000,
+     0x00000000,
+     0x00000000,
+@@ -2033,420 +2014,452 @@ u32 MCD_modelTaskTableSrc[]=
+     0x00000000,
+     0x00000000,
+ };
+-
+ u32 MCD_ChainNoEu_TDT[]=
+ {
+     0x80004000, /* 0000(:370):  LCDEXT: idx0 = 0x00000000; ; */
+     0x8118801b, /* 0004(:370):  LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */
+-    0xb8ca0018, /* 0008(:371):    LCD: idx2 = *(idx1 + var20); idx2 once var0; idx2 += inc3 */
+-    0x10004b10, /* 000C(:372):      DRD1A: var18 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x7000000c, /* 0010(:373):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
+-    0x024cf89f, /* 0014(:373):      DRD2B1: var9 = EU3(); EU3(idx2)  */
+-    0x60000009, /* 0018(:374):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT init=0 WS=0 RS=0 */
++    0xb8c60018, /* 0008(:371):    LCD: idx2 = *(idx1 + var12); idx2 once var0; idx2 += inc3 */
++    0x10002b10, /* 000C(:372):      DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x7000000d, /* 0010(:373):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
++    0x018cf89f, /* 0014(:373):      DRD2B1: var6 = EU3(); EU3(idx2)  */
++    0x6000000a, /* 0018(:374):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
+     0x080cf89f, /* 001C(:374):      DRD2B1: idx0 = EU3(); EU3(idx2)  */
+     0x000001f8, /* 0020(:0):    NOP */
+-    0x98180524, /* 0024(:378):  LCD: idx0 = idx0; idx0 != var20; idx0 += inc4 */
++    0x98180364, /* 0024(:378):  LCD: idx0 = idx0; idx0 == var13; idx0 += inc4 */
+     0x8118801b, /* 0028(:380):    LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */
+-    0xf8ca001a, /* 002C(:381):      LCDEXT: idx2 = *(idx1 + var20 + 8); idx2 once var0; idx2 += inc3 */
+-    0xb8ca601b, /* 0030(:382):      LCD: idx3 = *(idx1 + var20 + 12); ; idx3 += inc3 */
+-    0x10004310, /* 0034(:384):        DRD1A: var16 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x00001718, /* 0038(:385):        DRD1A: var5 = idx3; FN=0 init=0 WS=0 RS=0 */
+-    0xb8ca001d, /* 003C(:387):      LCD: idx2 = *(idx1 + var20 + 20); idx2 once var0; idx2 += inc3 */
+-    0x10001f10, /* 0040(:388):        DRD1A: var7 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0xf8c6001a, /* 002C(:381):      LCDEXT: idx2 = *(idx1 + var12 + 8); idx2 once var0; idx2 += inc3 */
++    0xb8c6601b, /* 0030(:382):      LCD: idx3 = *(idx1 + var12 + 12); ; idx3 += inc3 */
++    0x10002710, /* 0034(:384):        DRD1A: var9 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x00000f18, /* 0038(:385):        DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
++    0xb8c6001d, /* 003C(:387):      LCD: idx2 = *(idx1 + var12 + 20); idx2 once var0; idx2 += inc3 */
++    0x10001310, /* 0040(:388):        DRD1A: var4 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
+     0x60000007, /* 0044(:389):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=7 EXT init=0 WS=0 RS=0 */
+-    0x020cf893, /* 0048(:389):        DRD2B1: var8 = EU3(); EU3(idx2,var19)  */
+-    0x98ca001c, /* 004C(:391):      LCD: idx2 = idx1 + var20 + 4; idx2 once var0; idx2 += inc3 */
++    0x014cf88b, /* 0048(:389):        DRD2B1: var5 = EU3(); EU3(idx2,var11)  */
++    0x98c6001c, /* 004C(:391):      LCD: idx2 = idx1 + var12 + 4; idx2 once var0; idx2 += inc3 */
+     0x00000710, /* 0050(:392):        DRD1A: var1 = idx2; FN=0 init=0 WS=0 RS=0 */
+-    0x98ca8018, /* 0054(:393):      LCD: idx2 = idx1 + var21; idx2 once var0; idx2 += inc3 */
+-    0x10002b10, /* 0058(:394):        DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x0000c828, /* 005C(:395):        DRD1A: *idx2 = var5; FN=0 init=0 WS=0 RS=0 */
++    0x98c70018, /* 0054(:393):      LCD: idx2 = idx1 + var14; idx2 once var0; idx2 += inc3 */
++    0x10001f10, /* 0058(:394):        DRD1A: var7 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x0000c818, /* 005C(:395):        DRD1A: *idx2 = var3; FN=0 init=0 WS=0 RS=0 */
+     0x000001f8, /* 0060(:0):      NOP */
+-    0xc14ae018, /* 0064(:399):    LCDEXT: idx1 = var2 + var21; ; idx1 += inc3 */
+-    0xc004a51d, /* 0068(:399):    LCDEXT: idx2 = var0, idx3 = var9; idx3 == var20; idx2 += inc3, idx3 += inc5 */
++    0xc1476018, /* 0064(:399):    LCDEXT: idx1 = var2 + var14; ; idx1 += inc3 */
++    0xc003231d, /* 0068(:399):    LCDEXT: idx2 = var0, idx3 = var6; idx3 == var12; idx2 += inc3, idx3 += inc5 */
+     0x811a601b, /* 006C(:400):    LCD: idx4 = var2; ; idx4 += inc3 */
+-    0xc28a21c2, /* 0070(:403):      LCDEXT: idx5 = var5, idx6 = var20; idx6 < var7; idx5 += inc0, idx6 += inc2 */
+-    0x881be009, /* 0074(:403):      LCD: idx7 = var16; ; idx7 += inc1 */
++    0xc1862102, /* 0070(:403):      LCDEXT: idx5 = var3, idx6 = var12; idx6 < var4; idx5 += inc0, idx6 += inc2 */
++    0x849be009, /* 0074(:403):      LCD: idx7 = var9; ; idx7 += inc1 */
+     0x03fed7b8, /* 0078(:406):        DRD1A: *idx7; FN=0 init=31 WS=3 RS=3 */
+     0xda9b001b, /* 007C(:408):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
+     0x9b9be01b, /* 0080(:408):      LCD: idx7 = idx7; ; idx7 += inc3 */
+     0x1000cb20, /* 0084(:409):        DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */
+     0x70000006, /* 0088(:410):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf896, /* 008C(:410):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x088cf88f, /* 008C(:410):        DRD2B1: idx2 = EU3(); EU3(idx2,var15)  */
+     0x1000cb28, /* 0090(:411):        DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
+     0x70000006, /* 0094(:412):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf896, /* 0098(:412):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x088cf88f, /* 0098(:412):        DRD2B1: idx2 = EU3(); EU3(idx2,var15)  */
+     0x1000cb30, /* 009C(:413):        DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
+     0x70000006, /* 00A0(:414):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf896, /* 00A4(:414):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x088cf88f, /* 00A4(:414):        DRD2B1: idx2 = EU3(); EU3(idx2,var15)  */
+     0x1000cb38, /* 00A8(:415):        DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */
+     0x0000c728, /* 00AC(:416):        DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */
+     0x000001f8, /* 00B0(:0):      NOP */
+-    0xc14ae018, /* 00B4(:420):    LCDEXT: idx1 = var2 + var21; ; idx1 += inc3 */
+-    0xc004a5dd, /* 00B8(:420):    LCDEXT: idx2 = var0, idx3 = var9; idx3 == var23; idx2 += inc3, idx3 += inc5 */
++    0xc1476018, /* 00B4(:420):    LCDEXT: idx1 = var2 + var14; ; idx1 += inc3 */
++    0xc003241d, /* 00B8(:420):    LCDEXT: idx2 = var0, idx3 = var6; idx3 == var16; idx2 += inc3, idx3 += inc5 */
+     0x811a601b, /* 00BC(:421):    LCD: idx4 = var2; ; idx4 += inc3 */
+     0xda9b001b, /* 00C0(:424):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
+     0x9b9be01b, /* 00C4(:424):      LCD: idx7 = idx7; ; idx7 += inc3 */
+     0x0000d3a0, /* 00C8(:425):        DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */
+-    0xc28a21c2, /* 00CC(:427):      LCDEXT: idx5 = var5, idx6 = var20; idx6 < var7; idx5 += inc0, idx6 += inc2 */
+-    0x881be009, /* 00D0(:427):      LCD: idx7 = var16; ; idx7 += inc1 */
++    0xc1862102, /* 00CC(:427):      LCDEXT: idx5 = var3, idx6 = var12; idx6 < var4; idx5 += inc0, idx6 += inc2 */
++    0x849be009, /* 00D0(:427):      LCD: idx7 = var9; ; idx7 += inc1 */
+     0x0bfed7b8, /* 00D4(:430):        DRD1A: *idx7; FN=0 TFD init=31 WS=3 RS=3 */
+     0xda9b001b, /* 00D8(:432):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
+     0x9b9be01b, /* 00DC(:432):      LCD: idx7 = idx7; ; idx7 += inc3 */
+     0x1000cb20, /* 00E0(:433):        DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */
+     0x70000006, /* 00E4(:434):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf896, /* 00E8(:434):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x088cf88f, /* 00E8(:434):        DRD2B1: idx2 = EU3(); EU3(idx2,var15)  */
+     0x1000cb28, /* 00EC(:435):        DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
+     0x70000006, /* 00F0(:436):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf896, /* 00F4(:436):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x088cf88f, /* 00F4(:436):        DRD2B1: idx2 = EU3(); EU3(idx2,var15)  */
+     0x1000cb30, /* 00F8(:437):        DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
+     0x70000006, /* 00FC(:438):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf896, /* 0100(:438):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
++    0x088cf88f, /* 0100(:438):        DRD2B1: idx2 = EU3(); EU3(idx2,var15)  */
+     0x1000cb38, /* 0104(:439):        DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */
+     0x0000c728, /* 0108(:440):        DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */
+     0x000001f8, /* 010C(:0):      NOP */
+     0x8118801b, /* 0110(:444):    LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */
+-    0x8a19001b, /* 0114(:446):      LCD: idx2 = var20; idx2 once var0; idx2 += inc3 */
+-    0x6000000e, /* 0118(:447):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */
+-    0x088cf49f, /* 011C(:447):        DRD2B1: idx2 = EU3(); EU3(var18)  */
+-    0xd9190536, /* 0120(:448):      LCDEXT: idx2 = idx2; idx2 == var20; idx2 += inc6 */
+-    0x98ca0018, /* 0124(:448):      LCD: idx3 = idx1 + var20; idx3 once var0; idx3 += inc3 */
+-    0x6000000a, /* 0128(:450):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
+-    0x0cccfcdf, /* 012C(:450):        DRD2B1: *idx3 = EU3(); EU3(*idx3)  */
+-    0x000001f8, /* 0130(:0):      NOP */
+-    0xa14a001e, /* 0134(:453):    LCD: idx1 = *(var2 + var20 + 24); idx1 once var0; idx1 += inc3 */
+-    0x10000b08, /* 0138(:454):      DRD1A: var2 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x10002c90, /* 013C(:455):      DRD1A: var11 = var18; FN=0 MORE init=0 WS=0 RS=0 */
+-    0xb8ca0018, /* 0140(:456):      LCD: idx2 = *(idx1 + var20); idx2 once var0; idx2 += inc3 */
+-    0x10004b10, /* 0144(:457):        DRD1A: var18 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000009, /* 0148(:458):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT MORE init=0 WS=0 RS=0 */
+-    0x080cf89f, /* 014C(:458):        DRD2B1: idx0 = EU3(); EU3(idx2)  */
+-    0x6000000c, /* 0150(:459):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT init=0 WS=0 RS=0 */
+-    0x024cf89f, /* 0154(:459):        DRD2B1: var9 = EU3(); EU3(idx2)  */
+-    0x000001f8, /* 0158(:0):      NOP */
+-    0x8a18801b, /* 015C(:465):    LCD: idx1 = var20; idx1 once var0; idx1 += inc3 */
+-    0x7000000d, /* 0160(:466):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
+-    0x084cf2df, /* 0164(:466):      DRD2B1: idx1 = EU3(); EU3(var11)  */
+-    0xd899053f, /* 0168(:467):      LCDEXT: idx2 = idx1; idx2 > var20; idx2 += inc7 */
+-    0x8019801b, /* 016C(:467):      LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */
+-    0x040001f8, /* 0170(:468):        DRD1A: FN=0 INT init=0 WS=0 RS=0 */
+-    0x000001f8, /* 0174(:0):      NOP */
+-    0x000001f8, /* 0178(:0):    NOP */
++    0xd8c60018, /* 0114(:446):      LCDEXT: idx2 = idx1 + var12; idx2 once var0; idx2 += inc3 */
++    0x98c6601c, /* 0118(:446):      LCD: idx3 = idx1 + var12 + 4; ; idx3 += inc3 */
++    0x6000000b, /* 011C(:447):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT init=0 WS=0 RS=0 */
++    0x0c8cfc9f, /* 0120(:447):        DRD2B1: *idx2 = EU3(); EU3(*idx2)  */
++    0x000001f8, /* 0124(:0):      NOP */
++    0xa146001e, /* 0128(:450):    LCD: idx1 = *(var2 + var12 + 24); idx1 once var0; idx1 += inc3 */
++    0x10000b08, /* 012C(:451):      DRD1A: var2 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
++    0x10002050, /* 0130(:452):      DRD1A: var8 = var10; FN=0 MORE init=0 WS=0 RS=0 */
++    0xb8c60018, /* 0134(:453):      LCD: idx2 = *(idx1 + var12); idx2 once var0; idx2 += inc3 */
++    0x10002b10, /* 0138(:454):        DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x7000000a, /* 013C(:455):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT MORE init=0 WS=0 RS=0 */
++    0x080cf89f, /* 0140(:455):        DRD2B1: idx0 = EU3(); EU3(idx2)  */
++    0x6000000d, /* 0144(:456):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */
++    0x018cf89f, /* 0148(:456):        DRD2B1: var6 = EU3(); EU3(idx2)  */
++    0x000001f8, /* 014C(:0):      NOP */
++    0x8618801b, /* 0150(:462):    LCD: idx1 = var12; idx1 once var0; idx1 += inc3 */
++    0x7000000e, /* 0154(:463):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */
++    0x084cf21f, /* 0158(:463):      DRD2B1: idx1 = EU3(); EU3(var8)  */
++    0xd8990336, /* 015C(:464):      LCDEXT: idx2 = idx1; idx2 > var12; idx2 += inc6 */
++    0x8019801b, /* 0160(:464):      LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */
++    0x040001f8, /* 0164(:465):        DRD1A: FN=0 INT init=0 WS=0 RS=0 */
++    0x000001f8, /* 0168(:0):      NOP */
++    0x000001f8, /* 016C(:0):    NOP */
+ };
+ u32 MCD_SingleNoEu_TDT[]=
+ {
+-    0x8318001b, /* 0000(:646):  LCD: idx0 = var6; idx0 once var0; idx0 += inc3 */
+-    0x7000000c, /* 0004(:647):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
+-    0x080cf81f, /* 0008(:647):    DRD2B1: idx0 = EU3(); EU3(idx0)  */
+-    0x8318801b, /* 000C(:648):    LCD: idx1 = var6; idx1 once var0; idx1 += inc3 */
+-    0x6000000d, /* 0010(:649):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */
+-    0x084cf85f, /* 0014(:649):      DRD2B1: idx1 = EU3(); EU3(idx1)  */
++    0x8198001b, /* 0000(:657):  LCD: idx0 = var3; idx0 once var0; idx0 += inc3 */
++    0x7000000d, /* 0004(:658):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
++    0x080cf81f, /* 0008(:658):    DRD2B1: idx0 = EU3(); EU3(idx0)  */
++    0x8198801b, /* 000C(:659):    LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */
++    0x6000000e, /* 0010(:660):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */
++    0x084cf85f, /* 0014(:660):      DRD2B1: idx1 = EU3(); EU3(idx1)  */
+     0x000001f8, /* 0018(:0):    NOP */
+-    0x8498001b, /* 001C(:653):  LCD: idx0 = var9; idx0 once var0; idx0 += inc3 */
+-    0x7000000c, /* 0020(:654):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
+-    0x020cf81f, /* 0024(:654):    DRD2B1: var8 = EU3(); EU3(idx0)  */
+-    0x6000000d, /* 0028(:655):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */
+-    0x028cf81f, /* 002C(:655):    DRD2B1: var10 = EU3(); EU3(idx0)  */
+-    0xc404601b, /* 0030(:658):  LCDEXT: idx0 = var8, idx1 = var8; ; idx0 += inc3, idx1 += inc3 */
+-    0xc00423dc, /* 0034(:658):  LCDEXT: idx2 = var0, idx3 = var8; idx3 == var15; idx2 += inc3, idx3 += inc4 */
+-    0x809a601b, /* 0038(:659):  LCD: idx4 = var1; ; idx4 += inc3 */
+-    0xc207a182, /* 003C(:662):    LCDEXT: idx5 = var4, idx6 = var15; idx6 < var6; idx5 += inc0, idx6 += inc2 */
+-    0x869be009, /* 0040(:662):    LCD: idx7 = var13; ; idx7 += inc1 */
+-    0x03fed7b8, /* 0044(:665):      DRD1A: *idx7; FN=0 init=31 WS=3 RS=3 */
+-    0xda9b001b, /* 0048(:667):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
+-    0x9b9be01b, /* 004C(:667):    LCD: idx7 = idx7; ; idx7 += inc3 */
+-    0x70000006, /* 0050(:669):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf890, /* 0054(:669):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
+-    0x1000cb28, /* 0058(:670):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000006, /* 005C(:671):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf890, /* 0060(:671):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
+-    0x1000cb30, /* 0064(:672):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000006, /* 0068(:673):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf890, /* 006C(:673):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
+-    0x0000cb38, /* 0070(:674):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
++    0x8298001b, /* 001C(:664):  LCD: idx0 = var5; idx0 once var0; idx0 += inc3 */
++    0x7000000d, /* 0020(:665):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
++    0x010cf81f, /* 0024(:665):    DRD2B1: var4 = EU3(); EU3(idx0)  */
++    0x6000000e, /* 0028(:666):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */
++    0x018cf81f, /* 002C(:666):    DRD2B1: var6 = EU3(); EU3(idx0)  */
++    0xc202601b, /* 0030(:669):  LCDEXT: idx0 = var4, idx1 = var4; ; idx0 += inc3, idx1 += inc3 */
++    0xc002221c, /* 0034(:669):  LCDEXT: idx2 = var0, idx3 = var4; idx3 == var8; idx2 += inc3, idx3 += inc4 */
++    0x809a601b, /* 0038(:670):  LCD: idx4 = var1; ; idx4 += inc3 */
++    0xc10420c2, /* 003C(:673):    LCDEXT: idx5 = var2, idx6 = var8; idx6 < var3; idx5 += inc0, idx6 += inc2 */
++    0x839be009, /* 0040(:673):    LCD: idx7 = var7; ; idx7 += inc1 */
++    0x03fed7b8, /* 0044(:676):      DRD1A: *idx7; FN=0 init=31 WS=3 RS=3 */
++    0xda9b001b, /* 0048(:678):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 004C(:678):    LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x70000006, /* 0050(:680):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf889, /* 0054(:680):      DRD2B1: idx2 = EU3(); EU3(idx2,var9)  */
++    0x1000cb28, /* 0058(:681):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 005C(:682):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf889, /* 0060(:682):      DRD2B1: idx2 = EU3(); EU3(idx2,var9)  */
++    0x1000cb30, /* 0064(:683):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 0068(:684):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf889, /* 006C(:684):      DRD2B1: idx2 = EU3(); EU3(idx2,var9)  */
++    0x0000cb38, /* 0070(:685):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
+     0x000001f8, /* 0074(:0):    NOP */
+-    0xc404601b, /* 0078(:678):  LCDEXT: idx0 = var8, idx1 = var8; ; idx0 += inc3, idx1 += inc3 */
+-    0xc004245c, /* 007C(:678):  LCDEXT: idx2 = var0, idx3 = var8; idx3 == var17; idx2 += inc3, idx3 += inc4 */
+-    0x809a601b, /* 0080(:679):  LCD: idx4 = var1; ; idx4 += inc3 */
+-    0xda9b001b, /* 0084(:682):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
+-    0x9b9be01b, /* 0088(:682):    LCD: idx7 = idx7; ; idx7 += inc3 */
+-    0x0000d3a0, /* 008C(:683):      DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */
+-    0xc207a182, /* 0090(:685):    LCDEXT: idx5 = var4, idx6 = var15; idx6 < var6; idx5 += inc0, idx6 += inc2 */
+-    0x869be009, /* 0094(:685):    LCD: idx7 = var13; ; idx7 += inc1 */
+-    0x0bfed7b8, /* 0098(:688):      DRD1A: *idx7; FN=0 TFD init=31 WS=3 RS=3 */
+-    0xda9b001b, /* 009C(:690):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
+-    0x9b9be01b, /* 00A0(:690):    LCD: idx7 = idx7; ; idx7 += inc3 */
+-    0x70000006, /* 00A4(:692):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf890, /* 00A8(:692):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
+-    0x1000cb28, /* 00AC(:693):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000006, /* 00B0(:694):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf890, /* 00B4(:694):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
+-    0x1000cb30, /* 00B8(:695):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000006, /* 00BC(:696):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf890, /* 00C0(:696):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
+-    0x0000cb38, /* 00C4(:697):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
++    0xc202601b, /* 0078(:689):  LCDEXT: idx0 = var4, idx1 = var4; ; idx0 += inc3, idx1 += inc3 */
++    0xc002229c, /* 007C(:689):  LCDEXT: idx2 = var0, idx3 = var4; idx3 == var10; idx2 += inc3, idx3 += inc4 */
++    0x809a601b, /* 0080(:690):  LCD: idx4 = var1; ; idx4 += inc3 */
++    0xda9b001b, /* 0084(:693):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 0088(:693):    LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x0000d3a0, /* 008C(:694):      DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */
++    0xc10420c2, /* 0090(:696):    LCDEXT: idx5 = var2, idx6 = var8; idx6 < var3; idx5 += inc0, idx6 += inc2 */
++    0x839be009, /* 0094(:696):    LCD: idx7 = var7; ; idx7 += inc1 */
++    0x0bfed7b8, /* 0098(:699):      DRD1A: *idx7; FN=0 TFD init=31 WS=3 RS=3 */
++    0xda9b001b, /* 009C(:701):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 00A0(:701):    LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x70000006, /* 00A4(:703):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf889, /* 00A8(:703):      DRD2B1: idx2 = EU3(); EU3(idx2,var9)  */
++    0x1000cb28, /* 00AC(:704):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00B0(:705):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf889, /* 00B4(:705):      DRD2B1: idx2 = EU3(); EU3(idx2,var9)  */
++    0x1000cb30, /* 00B8(:706):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00BC(:707):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf889, /* 00C0(:707):      DRD2B1: idx2 = EU3(); EU3(idx2,var9)  */
++    0x0000cb38, /* 00C4(:708):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
+     0x000001f8, /* 00C8(:0):    NOP */
+-    0xc51803ed, /* 00CC(:701):  LCDEXT: idx0 = var10; idx0 > var15; idx0 += inc5 */
+-    0x8018801b, /* 00D0(:701):  LCD: idx1 = var0; idx1 once var0; idx1 += inc3 */
+-    0x040001f8, /* 00D4(:702):    DRD1A: FN=0 INT init=0 WS=0 RS=0 */
++    0xc318022d, /* 00CC(:712):  LCDEXT: idx0 = var6; idx0 > var8; idx0 += inc5 */
++    0x8018801b, /* 00D0(:712):  LCD: idx1 = var0; idx1 once var0; idx1 += inc3 */
++    0x040001f8, /* 00D4(:713):    DRD1A: FN=0 INT init=0 WS=0 RS=0 */
+ };
+ #ifdef MCD_INCLUDE_EU
+ u32 MCD_ChainEu_TDT[]=
+ {
+-    0x80004000, /* 0000(:928):  LCDEXT: idx0 = 0x00000000; ; */
+-    0x8118801b, /* 0004(:928):  LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */
+-    0xb8ca0018, /* 0008(:929):    LCD: idx2 = *(idx1 + var20); idx2 once var0; idx2 += inc3 */
+-    0x10004b10, /* 000C(:930):      DRD1A: var18 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x7000000c, /* 0010(:931):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
+-    0x024cf89f, /* 0014(:931):      DRD2B1: var9 = EU3(); EU3(idx2)  */
+-    0x60000009, /* 0018(:932):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT init=0 WS=0 RS=0 */
+-    0x080cf89f, /* 001C(:932):      DRD2B1: idx0 = EU3(); EU3(idx2)  */
++    0x80004000, /* 0000(:947):  LCDEXT: idx0 = 0x00000000; ; */
++    0x8198801b, /* 0004(:947):  LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */
++    0xb8c68018, /* 0008(:948):    LCD: idx2 = *(idx1 + var13); idx2 once var0; idx2 += inc3 */
++    0x10002f10, /* 000C(:949):      DRD1A: var11 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x7000000d, /* 0010(:950):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
++    0x01ccf89f, /* 0014(:950):      DRD2B1: var7 = EU3(); EU3(idx2)  */
++    0x6000000a, /* 0018(:951):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
++    0x080cf89f, /* 001C(:951):      DRD2B1: idx0 = EU3(); EU3(idx2)  */
+     0x000001f8, /* 0020(:0):    NOP */
+-    0x98180524, /* 0024(:936):  LCD: idx0 = idx0; idx0 != var20; idx0 += inc4 */
+-    0x8118801b, /* 0028(:938):    LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */
+-    0xf8ca001a, /* 002C(:939):      LCDEXT: idx2 = *(idx1 + var20 + 8); idx2 once var0; idx2 += inc3 */
+-    0xb8ca601b, /* 0030(:940):      LCD: idx3 = *(idx1 + var20 + 12); ; idx3 += inc3 */
+-    0x10004310, /* 0034(:942):        DRD1A: var16 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x00001718, /* 0038(:943):        DRD1A: var5 = idx3; FN=0 init=0 WS=0 RS=0 */
+-    0xb8ca001d, /* 003C(:945):      LCD: idx2 = *(idx1 + var20 + 20); idx2 once var0; idx2 += inc3 */
+-    0x10001f10, /* 0040(:946):        DRD1A: var7 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x60000007, /* 0044(:947):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=7 EXT init=0 WS=0 RS=0 */
+-    0x020cf893, /* 0048(:947):        DRD2B1: var8 = EU3(); EU3(idx2,var19)  */
+-    0x98ca001c, /* 004C(:949):      LCD: idx2 = idx1 + var20 + 4; idx2 once var0; idx2 += inc3 */
+-    0x00000710, /* 0050(:950):        DRD1A: var1 = idx2; FN=0 init=0 WS=0 RS=0 */
+-    0x98ca8018, /* 0054(:951):      LCD: idx2 = idx1 + var21; idx2 once var0; idx2 += inc3 */
+-    0x10002b10, /* 0058(:952):        DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x0000c828, /* 005C(:953):        DRD1A: *idx2 = var5; FN=0 init=0 WS=0 RS=0 */
++    0x981803a4, /* 0024(:955):  LCD: idx0 = idx0; idx0 == var14; idx0 += inc4 */
++    0x8198801b, /* 0028(:957):    LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */
++    0xf8c6801a, /* 002C(:958):      LCDEXT: idx2 = *(idx1 + var13 + 8); idx2 once var0; idx2 += inc3 */
++    0xb8c6e01b, /* 0030(:959):      LCD: idx3 = *(idx1 + var13 + 12); ; idx3 += inc3 */
++    0x10002b10, /* 0034(:961):        DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x00001318, /* 0038(:962):        DRD1A: var4 = idx3; FN=0 init=0 WS=0 RS=0 */
++    0xb8c6801d, /* 003C(:964):      LCD: idx2 = *(idx1 + var13 + 20); idx2 once var0; idx2 += inc3 */
++    0x10001710, /* 0040(:965):        DRD1A: var5 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x60000007, /* 0044(:966):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=7 EXT init=0 WS=0 RS=0 */
++    0x018cf88c, /* 0048(:966):        DRD2B1: var6 = EU3(); EU3(idx2,var12)  */
++    0x98c6801c, /* 004C(:968):      LCD: idx2 = idx1 + var13 + 4; idx2 once var0; idx2 += inc3 */
++    0x00000b10, /* 0050(:969):        DRD1A: var2 = idx2; FN=0 init=0 WS=0 RS=0 */
++    0x98c78018, /* 0054(:970):      LCD: idx2 = idx1 + var15; idx2 once var0; idx2 += inc3 */
++    0x10002310, /* 0058(:971):        DRD1A: var8 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x0000c820, /* 005C(:972):        DRD1A: *idx2 = var4; FN=0 init=0 WS=0 RS=0 */
+     0x000001f8, /* 0060(:0):      NOP */
+-    0xc14ae018, /* 0064(:957):    LCDEXT: idx1 = var2 + var21; ; idx1 += inc3 */
+-    0xc004a51d, /* 0068(:957):    LCDEXT: idx2 = var0, idx3 = var9; idx3 == var20; idx2 += inc3, idx3 += inc5 */
+-    0x811a601b, /* 006C(:958):    LCD: idx4 = var2; ; idx4 += inc3 */
+-    0xc28a21c2, /* 0070(:961):      LCDEXT: idx5 = var5, idx6 = var20; idx6 < var7; idx5 += inc0, idx6 += inc2 */
+-    0x881be009, /* 0074(:961):      LCD: idx7 = var16; ; idx7 += inc1 */
+-    0x63fe0000, /* 0078(:964):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=31 WS=3 RS=3 */
+-    0x0d4cfddf, /* 007C(:964):        DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
+-    0xda9b001b, /* 0080(:966):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
+-    0x9b9be01b, /* 0084(:966):      LCD: idx7 = idx7; ; idx7 += inc3 */
+-    0x1000cb20, /* 0088(:967):        DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000006, /* 008C(:968):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf896, /* 0090(:968):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
+-    0x1000cb28, /* 0094(:969):        DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000006, /* 0098(:970):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf896, /* 009C(:970):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
+-    0x1000cb30, /* 00A0(:971):        DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000006, /* 00A4(:972):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf896, /* 00A8(:972):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
+-    0x1000cb38, /* 00AC(:973):        DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x0000c728, /* 00B0(:974):        DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */
+-    0x000001f8, /* 00B4(:0):      NOP */
+-    0xc14ae018, /* 00B8(:978):    LCDEXT: idx1 = var2 + var21; ; idx1 += inc3 */
+-    0xc004a5dd, /* 00BC(:978):    LCDEXT: idx2 = var0, idx3 = var9; idx3 == var23; idx2 += inc3, idx3 += inc5 */
+-    0x811a601b, /* 00C0(:979):    LCD: idx4 = var2; ; idx4 += inc3 */
+-    0xda9b001b, /* 00C4(:982):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
+-    0x9b9be01b, /* 00C8(:982):      LCD: idx7 = idx7; ; idx7 += inc3 */
+-    0x0000d3a0, /* 00CC(:983):        DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */
+-    0xc28a21c2, /* 00D0(:985):      LCDEXT: idx5 = var5, idx6 = var20; idx6 < var7; idx5 += inc0, idx6 += inc2 */
+-    0x881be009, /* 00D4(:985):      LCD: idx7 = var16; ; idx7 += inc1 */
+-    0x6bfe0000, /* 00D8(:988):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 TFD EXT init=31 WS=3 RS=3 */
+-    0x0d4cfddf, /* 00DC(:988):        DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
+-    0xda9b001b, /* 00E0(:990):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
+-    0x9b9be01b, /* 00E4(:990):      LCD: idx7 = idx7; ; idx7 += inc3 */
+-    0x1000cb20, /* 00E8(:991):        DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000006, /* 00EC(:992):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf896, /* 00F0(:992):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
+-    0x1000cb28, /* 00F4(:993):        DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000006, /* 00F8(:994):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf896, /* 00FC(:994):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
+-    0x1000cb30, /* 0100(:995):        DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000006, /* 0104(:996):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf896, /* 0108(:996):        DRD2B1: idx2 = EU3(); EU3(idx2,var22)  */
+-    0x1000cb38, /* 010C(:997):        DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x0000c728, /* 0110(:998):        DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */
+-    0x000001f8, /* 0114(:0):      NOP */
+-    0x8118801b, /* 0118(:1002):    LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */
+-    0x8a19001b, /* 011C(:1004):      LCD: idx2 = var20; idx2 once var0; idx2 += inc3 */
+-    0x6000000e, /* 0120(:1005):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */
+-    0x088cf49f, /* 0124(:1005):        DRD2B1: idx2 = EU3(); EU3(var18)  */
+-    0xd9190536, /* 0128(:1006):      LCDEXT: idx2 = idx2; idx2 == var20; idx2 += inc6 */
+-    0x98ca0018, /* 012C(:1006):      LCD: idx3 = idx1 + var20; idx3 once var0; idx3 += inc3 */
+-    0x6000000a, /* 0130(:1008):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
+-    0x0cccfcdf, /* 0134(:1008):        DRD2B1: *idx3 = EU3(); EU3(*idx3)  */
+-    0x000001f8, /* 0138(:0):      NOP */
+-    0xa14a001e, /* 013C(:1011):    LCD: idx1 = *(var2 + var20 + 24); idx1 once var0; idx1 += inc3 */
+-    0x10000b08, /* 0140(:1012):      DRD1A: var2 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x10002c90, /* 0144(:1013):      DRD1A: var11 = var18; FN=0 MORE init=0 WS=0 RS=0 */
+-    0xb8ca0018, /* 0148(:1014):      LCD: idx2 = *(idx1 + var20); idx2 once var0; idx2 += inc3 */
+-    0x10004b10, /* 014C(:1015):        DRD1A: var18 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000009, /* 0150(:1016):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT MORE init=0 WS=0 RS=0 */
+-    0x080cf89f, /* 0154(:1016):        DRD2B1: idx0 = EU3(); EU3(idx2)  */
+-    0x6000000c, /* 0158(:1017):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT init=0 WS=0 RS=0 */
+-    0x024cf89f, /* 015C(:1017):        DRD2B1: var9 = EU3(); EU3(idx2)  */
+-    0x000001f8, /* 0160(:0):      NOP */
+-    0x8a18801b, /* 0164(:1023):    LCD: idx1 = var20; idx1 once var0; idx1 += inc3 */
+-    0x7000000d, /* 0168(:1024):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
+-    0x084cf2df, /* 016C(:1024):      DRD2B1: idx1 = EU3(); EU3(var11)  */
+-    0xd899053f, /* 0170(:1025):      LCDEXT: idx2 = idx1; idx2 > var20; idx2 += inc7 */
+-    0x8019801b, /* 0174(:1025):      LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */
+-    0x040001f8, /* 0178(:1026):        DRD1A: FN=0 INT init=0 WS=0 RS=0 */
+-    0x000001f8, /* 017C(:0):      NOP */
+-    0x000001f8, /* 0180(:0):    NOP */
++    0x8698801b, /* 0064(:976):    LCD: idx1 = var13; idx1 once var0; idx1 += inc3 */
++    0x7000000f, /* 0068(:977):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=15 EXT MORE init=0 WS=0 RS=0 */
++    0x084cf2df, /* 006C(:977):      DRD2B1: idx1 = EU3(); EU3(var11)  */
++    0xd899042d, /* 0070(:978):      LCDEXT: idx2 = idx1; idx2 >= var16; idx2 += inc5 */
++    0x8019801b, /* 0074(:978):      LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */
++    0x60000003, /* 0078(:979):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */
++    0x2cd7c7df, /* 007C(:979):        DRD2B2: EU3(var13)  */
++    0xd8990364, /* 0080(:980):      LCDEXT: idx2 = idx1; idx2 == var13; idx2 += inc4 */
++    0x8019801b, /* 0084(:980):      LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */
++    0x60000003, /* 0088(:981):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */
++    0x2c17c7df, /* 008C(:981):        DRD2B2: EU3(var1)  */
++    0x000001f8, /* 0090(:0):      NOP */
++    0xc1c7e018, /* 0094(:984):    LCDEXT: idx1 = var3 + var15; ; idx1 += inc3 */
++    0xc003a35e, /* 0098(:984):    LCDEXT: idx2 = var0, idx3 = var7; idx3 == var13; idx2 += inc3, idx3 += inc6 */
++    0x819a601b, /* 009C(:985):    LCD: idx4 = var3; ; idx4 += inc3 */
++    0xc206a142, /* 00A0(:988):      LCDEXT: idx5 = var4, idx6 = var13; idx6 < var5; idx5 += inc0, idx6 += inc2 */
++    0x851be009, /* 00A4(:988):      LCD: idx7 = var10; ; idx7 += inc1 */
++    0x63fe0000, /* 00A8(:991):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=31 WS=3 RS=3 */
++    0x0d4cfddf, /* 00AC(:991):        DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
++    0xda9b001b, /* 00B0(:993):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 00B4(:993):      LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x70000002, /* 00B8(:994):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
++    0x004cf81f, /* 00BC(:994):        DRD2B1: var1 = EU3(); EU3(idx0)  */
++    0x1000cb20, /* 00C0(:995):        DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00C4(:996):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf891, /* 00C8(:996):        DRD2B1: idx2 = EU3(); EU3(idx2,var17)  */
++    0x1000cb28, /* 00CC(:997):        DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00D0(:998):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf891, /* 00D4(:998):        DRD2B1: idx2 = EU3(); EU3(idx2,var17)  */
++    0x1000cb30, /* 00D8(:999):        DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00DC(:1000):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf891, /* 00E0(:1000):        DRD2B1: idx2 = EU3(); EU3(idx2,var17)  */
++    0x1000cb38, /* 00E4(:1001):        DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */
++    0x0000c728, /* 00E8(:1002):        DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */
++    0x000001f8, /* 00EC(:0):      NOP */
++    0xc1c7e018, /* 00F0(:1006):    LCDEXT: idx1 = var3 + var15; ; idx1 += inc3 */
++    0xc003a49e, /* 00F4(:1006):    LCDEXT: idx2 = var0, idx3 = var7; idx3 == var18; idx2 += inc3, idx3 += inc6 */
++    0x819a601b, /* 00F8(:1007):    LCD: idx4 = var3; ; idx4 += inc3 */
++    0xda9b001b, /* 00FC(:1010):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 0100(:1010):      LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x0000d3a0, /* 0104(:1011):        DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */
++    0xc206a142, /* 0108(:1013):      LCDEXT: idx5 = var4, idx6 = var13; idx6 < var5; idx5 += inc0, idx6 += inc2 */
++    0x851be009, /* 010C(:1013):      LCD: idx7 = var10; ; idx7 += inc1 */
++    0x6bfe0000, /* 0110(:1016):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 TFD EXT init=31 WS=3 RS=3 */
++    0x0d4cfddf, /* 0114(:1016):        DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
++    0xda9b001b, /* 0118(:1018):      LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 011C(:1018):      LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x70000002, /* 0120(:1019):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
++    0x004cf81f, /* 0124(:1019):        DRD2B1: var1 = EU3(); EU3(idx0)  */
++    0x1000cb20, /* 0128(:1020):        DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 012C(:1021):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf891, /* 0130(:1021):        DRD2B1: idx2 = EU3(); EU3(idx2,var17)  */
++    0x1000cb28, /* 0134(:1022):        DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 0138(:1023):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf891, /* 013C(:1023):        DRD2B1: idx2 = EU3(); EU3(idx2,var17)  */
++    0x1000cb30, /* 0140(:1024):        DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 0144(:1025):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf891, /* 0148(:1025):        DRD2B1: idx2 = EU3(); EU3(idx2,var17)  */
++    0x1000cb38, /* 014C(:1026):        DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */
++    0x0000c728, /* 0150(:1027):        DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */
++    0x000001f8, /* 0154(:0):      NOP */
++    0x8198801b, /* 0158(:1031):    LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */
++    0xd8c68018, /* 015C(:1033):      LCDEXT: idx2 = idx1 + var13; idx2 once var0; idx2 += inc3 */
++    0x98c6e01c, /* 0160(:1033):      LCD: idx3 = idx1 + var13 + 4; ; idx3 += inc3 */
++    0x6000000b, /* 0164(:1034):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT init=0 WS=0 RS=0 */
++    0x0c8cfc9f, /* 0168(:1034):        DRD2B1: *idx2 = EU3(); EU3(*idx2)  */
++    0x0000cc08, /* 016C(:1035):      DRD1A: *idx3 = var1; FN=0 init=0 WS=0 RS=0 */
++    0xa1c6801e, /* 0170(:1038):    LCD: idx1 = *(var3 + var13 + 24); idx1 once var0; idx1 += inc3 */
++    0x10000f08, /* 0174(:1039):      DRD1A: var3 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
++    0x10002458, /* 0178(:1040):      DRD1A: var9 = var11; FN=0 MORE init=0 WS=0 RS=0 */
++    0xb8c68018, /* 017C(:1041):      LCD: idx2 = *(idx1 + var13); idx2 once var0; idx2 += inc3 */
++    0x10002f10, /* 0180(:1042):        DRD1A: var11 = idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x7000000a, /* 0184(:1043):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT MORE init=0 WS=0 RS=0 */
++    0x080cf89f, /* 0188(:1043):        DRD2B1: idx0 = EU3(); EU3(idx2)  */
++    0x6000000d, /* 018C(:1044):        DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */
++    0x01ccf89f, /* 0190(:1044):        DRD2B1: var7 = EU3(); EU3(idx2)  */
++    0x000001f8, /* 0194(:0):      NOP */
++    0x8698801b, /* 0198(:1050):    LCD: idx1 = var13; idx1 once var0; idx1 += inc3 */
++    0x7000000e, /* 019C(:1051):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */
++    0x084cf25f, /* 01A0(:1051):      DRD2B1: idx1 = EU3(); EU3(var9)  */
++    0xd899037f, /* 01A4(:1052):      LCDEXT: idx2 = idx1; idx2 > var13; idx2 += inc7 */
++    0x8019801b, /* 01A8(:1052):      LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */
++    0x040001f8, /* 01AC(:1053):        DRD1A: FN=0 INT init=0 WS=0 RS=0 */
++    0x000001f8, /* 01B0(:0):      NOP */
++    0x000001f8, /* 01B4(:0):    NOP */
+ };
+ u32 MCD_SingleEu_TDT[]=
+ {
+-    0x8318001b, /* 0000(:1204):  LCD: idx0 = var6; idx0 once var0; idx0 += inc3 */
+-    0x7000000c, /* 0004(:1205):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
+-    0x080cf81f, /* 0008(:1205):    DRD2B1: idx0 = EU3(); EU3(idx0)  */
+-    0x8318801b, /* 000C(:1206):    LCD: idx1 = var6; idx1 once var0; idx1 += inc3 */
+-    0x6000000d, /* 0010(:1207):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */
+-    0x084cf85f, /* 0014(:1207):      DRD2B1: idx1 = EU3(); EU3(idx1)  */
++    0x8218001b, /* 0000(:1248):  LCD: idx0 = var4; idx0 once var0; idx0 += inc3 */
++    0x7000000d, /* 0004(:1249):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
++    0x080cf81f, /* 0008(:1249):    DRD2B1: idx0 = EU3(); EU3(idx0)  */
++    0x8218801b, /* 000C(:1250):    LCD: idx1 = var4; idx1 once var0; idx1 += inc3 */
++    0x6000000e, /* 0010(:1251):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */
++    0x084cf85f, /* 0014(:1251):      DRD2B1: idx1 = EU3(); EU3(idx1)  */
+     0x000001f8, /* 0018(:0):    NOP */
+-    0x8498001b, /* 001C(:1211):  LCD: idx0 = var9; idx0 once var0; idx0 += inc3 */
+-    0x7000000c, /* 0020(:1212):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
+-    0x020cf81f, /* 0024(:1212):    DRD2B1: var8 = EU3(); EU3(idx0)  */
+-    0x6000000d, /* 0028(:1213):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */
+-    0x028cf81f, /* 002C(:1213):    DRD2B1: var10 = EU3(); EU3(idx0)  */
+-    0xc404601b, /* 0030(:1216):  LCDEXT: idx0 = var8, idx1 = var8; ; idx0 += inc3, idx1 += inc3 */
+-    0xc00423dc, /* 0034(:1216):  LCDEXT: idx2 = var0, idx3 = var8; idx3 == var15; idx2 += inc3, idx3 += inc4 */
+-    0x809a601b, /* 0038(:1217):  LCD: idx4 = var1; ; idx4 += inc3 */
+-    0xc207a182, /* 003C(:1220):    LCDEXT: idx5 = var4, idx6 = var15; idx6 < var6; idx5 += inc0, idx6 += inc2 */
+-    0x869be009, /* 0040(:1220):    LCD: idx7 = var13; ; idx7 += inc1 */
+-    0x63fe0000, /* 0044(:1223):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=31 WS=3 RS=3 */
+-    0x0d4cfddf, /* 0048(:1223):      DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
+-    0xda9b001b, /* 004C(:1225):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
+-    0x9b9be01b, /* 0050(:1225):    LCD: idx7 = idx7; ; idx7 += inc3 */
+-    0x70000006, /* 0054(:1227):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf890, /* 0058(:1227):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
+-    0x1000cb28, /* 005C(:1228):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000006, /* 0060(:1229):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf890, /* 0064(:1229):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
+-    0x1000cb30, /* 0068(:1230):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000006, /* 006C(:1231):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf890, /* 0070(:1231):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
+-    0x0000cb38, /* 0074(:1232):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
+-    0x000001f8, /* 0078(:0):    NOP */
+-    0xc404601b, /* 007C(:1236):  LCDEXT: idx0 = var8, idx1 = var8; ; idx0 += inc3, idx1 += inc3 */
+-    0xc004245c, /* 0080(:1236):  LCDEXT: idx2 = var0, idx3 = var8; idx3 == var17; idx2 += inc3, idx3 += inc4 */
+-    0x809a601b, /* 0084(:1237):  LCD: idx4 = var1; ; idx4 += inc3 */
+-    0xda9b001b, /* 0088(:1240):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
+-    0x9b9be01b, /* 008C(:1240):    LCD: idx7 = idx7; ; idx7 += inc3 */
+-    0x0000d3a0, /* 0090(:1241):      DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */
+-    0xc207a182, /* 0094(:1243):    LCDEXT: idx5 = var4, idx6 = var15; idx6 < var6; idx5 += inc0, idx6 += inc2 */
+-    0x869be009, /* 0098(:1243):    LCD: idx7 = var13; ; idx7 += inc1 */
+-    0x6bfe0000, /* 009C(:1246):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 TFD EXT init=31 WS=3 RS=3 */
+-    0x0d4cfddf, /* 00A0(:1246):      DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
+-    0xda9b001b, /* 00A4(:1248):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
+-    0x9b9be01b, /* 00A8(:1248):    LCD: idx7 = idx7; ; idx7 += inc3 */
+-    0x70000006, /* 00AC(:1250):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf890, /* 00B0(:1250):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
+-    0x1000cb28, /* 00B4(:1251):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000006, /* 00B8(:1252):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf890, /* 00BC(:1252):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
+-    0x1000cb30, /* 00C0(:1253):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x70000006, /* 00C4(:1254):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
+-    0x088cf890, /* 00C8(:1254):      DRD2B1: idx2 = EU3(); EU3(idx2,var16)  */
+-    0x0000cb38, /* 00CC(:1255):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
+-    0x000001f8, /* 00D0(:0):    NOP */
+-    0xc51803ed, /* 00D4(:1259):  LCDEXT: idx0 = var10; idx0 > var15; idx0 += inc5 */
+-    0x8018801b, /* 00D8(:1259):  LCD: idx1 = var0; idx1 once var0; idx1 += inc3 */
+-    0x040001f8, /* 00DC(:1260):    DRD1A: FN=0 INT init=0 WS=0 RS=0 */
++    0x8318001b, /* 001C(:1255):  LCD: idx0 = var6; idx0 once var0; idx0 += inc3 */
++    0x7000000d, /* 0020(:1256):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
++    0x014cf81f, /* 0024(:1256):    DRD2B1: var5 = EU3(); EU3(idx0)  */
++    0x6000000e, /* 0028(:1257):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */
++    0x01ccf81f, /* 002C(:1257):    DRD2B1: var7 = EU3(); EU3(idx0)  */
++    0x8498001b, /* 0030(:1260):  LCD: idx0 = var9; idx0 once var0; idx0 += inc3 */
++    0x7000000f, /* 0034(:1261):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=15 EXT MORE init=0 WS=0 RS=0 */
++    0x080cf19f, /* 0038(:1261):    DRD2B1: idx0 = EU3(); EU3(var6)  */
++    0xd81882a4, /* 003C(:1262):    LCDEXT: idx1 = idx0; idx1 >= var10; idx1 += inc4 */
++    0x8019001b, /* 0040(:1262):    LCD: idx2 = var0; idx2 once var0; idx2 += inc3 */
++    0x60000003, /* 0044(:1263):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */
++    0x2c97c7df, /* 0048(:1263):      DRD2B2: EU3(var9)  */
++    0xd818826d, /* 004C(:1264):    LCDEXT: idx1 = idx0; idx1 == var9; idx1 += inc5 */
++    0x8019001b, /* 0050(:1264):    LCD: idx2 = var0; idx2 once var0; idx2 += inc3 */
++    0x60000003, /* 0054(:1265):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */
++    0x2c17c7df, /* 0058(:1265):      DRD2B2: EU3(var1)  */
++    0x000001f8, /* 005C(:0):    NOP */
++    0xc282e01b, /* 0060(:1268):  LCDEXT: idx0 = var5, idx1 = var5; ; idx0 += inc3, idx1 += inc3 */
++    0xc002a25e, /* 0064(:1268):  LCDEXT: idx2 = var0, idx3 = var5; idx3 == var9; idx2 += inc3, idx3 += inc6 */
++    0x811a601b, /* 0068(:1269):  LCD: idx4 = var2; ; idx4 += inc3 */
++    0xc184a102, /* 006C(:1272):    LCDEXT: idx5 = var3, idx6 = var9; idx6 < var4; idx5 += inc0, idx6 += inc2 */
++    0x841be009, /* 0070(:1272):    LCD: idx7 = var8; ; idx7 += inc1 */
++    0x63fe0000, /* 0074(:1275):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=31 WS=3 RS=3 */
++    0x0d4cfddf, /* 0078(:1275):      DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
++    0xda9b001b, /* 007C(:1277):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 0080(:1277):    LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x70000002, /* 0084(:1279):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
++    0x004cf99f, /* 0088(:1279):      DRD2B1: var1 = EU3(); EU3(idx6)  */
++    0x70000006, /* 008C(:1280):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf88b, /* 0090(:1280):      DRD2B1: idx2 = EU3(); EU3(idx2,var11)  */
++    0x1000cb28, /* 0094(:1281):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 0098(:1282):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf88b, /* 009C(:1282):      DRD2B1: idx2 = EU3(); EU3(idx2,var11)  */
++    0x1000cb30, /* 00A0(:1283):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00A4(:1284):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf88b, /* 00A8(:1284):      DRD2B1: idx2 = EU3(); EU3(idx2,var11)  */
++    0x0000cb38, /* 00AC(:1285):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
++    0x000001f8, /* 00B0(:0):    NOP */
++    0xc282e01b, /* 00B4(:1289):  LCDEXT: idx0 = var5, idx1 = var5; ; idx0 += inc3, idx1 += inc3 */
++    0xc002a31e, /* 00B8(:1289):  LCDEXT: idx2 = var0, idx3 = var5; idx3 == var12; idx2 += inc3, idx3 += inc6 */
++    0x811a601b, /* 00BC(:1290):  LCD: idx4 = var2; ; idx4 += inc3 */
++    0xda9b001b, /* 00C0(:1293):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 00C4(:1293):    LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x0000d3a0, /* 00C8(:1294):      DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */
++    0xc184a102, /* 00CC(:1296):    LCDEXT: idx5 = var3, idx6 = var9; idx6 < var4; idx5 += inc0, idx6 += inc2 */
++    0x841be009, /* 00D0(:1296):    LCD: idx7 = var8; ; idx7 += inc1 */
++    0x6bfe0000, /* 00D4(:1299):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 TFD EXT init=31 WS=3 RS=3 */
++    0x0d4cfddf, /* 00D8(:1299):      DRD2B1: *idx5 = EU3(); EU3(*idx7)  */
++    0xda9b001b, /* 00DC(:1301):    LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */
++    0x9b9be01b, /* 00E0(:1301):    LCD: idx7 = idx7; ; idx7 += inc3 */
++    0x70000002, /* 00E4(:1303):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
++    0x004cf99f, /* 00E8(:1303):      DRD2B1: var1 = EU3(); EU3(idx6)  */
++    0x70000006, /* 00EC(:1304):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf88b, /* 00F0(:1304):      DRD2B1: idx2 = EU3(); EU3(idx2,var11)  */
++    0x1000cb28, /* 00F4(:1305):      DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 00F8(:1306):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf88b, /* 00FC(:1306):      DRD2B1: idx2 = EU3(); EU3(idx2,var11)  */
++    0x1000cb30, /* 0100(:1307):      DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */
++    0x70000006, /* 0104(:1308):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */
++    0x088cf88b, /* 0108(:1308):      DRD2B1: idx2 = EU3(); EU3(idx2,var11)  */
++    0x0000cb38, /* 010C(:1309):      DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */
++    0x000001f8, /* 0110(:0):    NOP */
++    0x8144801c, /* 0114(:1312):  LCD: idx0 = var2 + var9 + 4; idx0 once var0; idx0 += inc3 */
++    0x0000c008, /* 0118(:1313):    DRD1A: *idx0 = var1; FN=0 init=0 WS=0 RS=0 */
++    0xc398027f, /* 011C(:1315):  LCDEXT: idx0 = var7; idx0 > var9; idx0 += inc7 */
++    0x8018801b, /* 0120(:1315):  LCD: idx1 = var0; idx1 once var0; idx1 += inc3 */
++    0x040001f8, /* 0124(:1316):    DRD1A: FN=0 INT init=0 WS=0 RS=0 */
+ };
+ #endif
+ u32 MCD_ENetRcv_TDT[]=
+ {
+-    0x80004000, /* 0000(:1334):  LCDEXT: idx0 = 0x00000000; ; */
+-    0x82188000, /* 0004(:1334):  LCD: idx1 = var4; idx1 once var0; idx1 += inc0 */
+-    0x10000788, /* 0008(:1335):    DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x60000009, /* 000C(:1336):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT init=0 WS=0 RS=0 */
+-    0x080cf05f, /* 0010(:1336):    DRD2B1: idx0 = EU3(); EU3(var1)  */
+-    0x98180249, /* 0014(:1339):  LCD: idx0 = idx0; idx0 != var9; idx0 += inc1 */
+-    0x82448004, /* 0018(:1341):    LCD: idx1 = var4 + var9 + 4; idx1 once var0; idx1 += inc0 */
+-    0x7000000d, /* 001C(:1342):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
+-    0x014cf05f, /* 0020(:1342):      DRD2B1: var5 = EU3(); EU3(var1)  */
+-    0x7000000b, /* 0024(:1343):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT MORE init=0 WS=0 RS=0 */
+-    0x020cf05f, /* 0028(:1343):      DRD2B1: var8 = EU3(); EU3(var1)  */
+-    0x70000004, /* 002C(:1344):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */
+-    0x018cf04a, /* 0030(:1344):      DRD2B1: var6 = EU3(); EU3(var1,var10)  */
+-    0x70000004, /* 0034(:1345):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */
+-    0x004cf04b, /* 0038(:1345):      DRD2B1: var1 = EU3(); EU3(var1,var11)  */
+-    0x00000b88, /* 003C(:1348):      DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */
+-    0xc4838190, /* 0040(:1351):    LCDEXT: idx1 = var9, idx2 = var7; idx1 < var6; idx1 += inc2, idx2 += inc0 */
+-    0x8119e012, /* 0044(:1351):    LCD: idx3 = var2; ; idx3 += inc2 */
+-    0x03e0cf90, /* 0048(:1354):      DRD1A: *idx3 = *idx2; FN=0 init=31 WS=0 RS=0 */
+-    0x81188000, /* 004C(:1357):    LCD: idx1 = var2; idx1 once var0; idx1 += inc0 */
+-    0x000ac788, /* 0050(:1358):      DRD1A: *idx1 = *idx1; FN=0 init=0 WS=1 RS=1 */
+-    0xc4838000, /* 0054(:1360):    LCDEXT: idx1 = var9, idx2 = var7; idx1 once var0; idx1 += inc0, idx2 += inc0 */
+-    0x8219e000, /* 0058(:1360):    LCD: idx3 = var4; ; idx3 += inc0 */
+-    0x70000004, /* 005C(:1368):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */
+-    0x084cfc8c, /* 0060(:1368):      DRD2B1: idx1 = EU3(); EU3(*idx2,var12)  */
+-    0x60000005, /* 0064(:1371):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */
+-    0x0cccf841, /* 0068(:1371):      DRD2B1: *idx3 = EU3(); EU3(idx1,var1)  */
+-    0x82468000, /* 006C(:1377):    LCD: idx1 = var4 + var13; idx1 once var0; idx1 += inc0 */
+-    0xc419025b, /* 0070(:1379):      LCDEXT: idx2 = var8; idx2 > var9; idx2 += inc3 */
+-    0x80198000, /* 0074(:1379):      LCD: idx3 = var0; idx3 once var0; idx3 += inc0 */
+-    0x00008400, /* 0078(:1380):        DRD1A: idx1 = var0; FN=0 init=0 WS=0 RS=0 */
+-    0x00001308, /* 007C(:1381):      DRD1A: var4 = idx1; FN=0 init=0 WS=0 RS=0 */
+-    0x82188000, /* 0080(:1384):    LCD: idx1 = var4; idx1 once var0; idx1 += inc0 */
+-    0x10000788, /* 0084(:1385):      DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x60000009, /* 0088(:1386):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT init=0 WS=0 RS=0 */
+-    0x080cf05f, /* 008C(:1386):      DRD2B1: idx0 = EU3(); EU3(var1)  */
+-    0xc2988249, /* 0090(:1389):    LCDEXT: idx1 = var5; idx1 != var9; idx1 += inc1 */
+-    0x80190000, /* 0094(:1389):    LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
+-    0x040001f8, /* 0098(:1390):      DRD1A: FN=0 INT init=0 WS=0 RS=0 */
+-    0x000001f8, /* 009C(:0):    NOP */
++    0x80004000, /* 0000(:1389):  LCDEXT: idx0 = 0x00000000; ; */
++    0x81988000, /* 0004(:1389):  LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
++    0x10000788, /* 0008(:1390):    DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
++    0x6000000a, /* 000C(:1391):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
++    0x080cf05f, /* 0010(:1391):    DRD2B1: idx0 = EU3(); EU3(var1)  */
++    0x98180209, /* 0014(:1394):  LCD: idx0 = idx0; idx0 != var8; idx0 += inc1 */
++    0x81c40004, /* 0018(:1396):    LCD: idx1 = var3 + var8 + 4; idx1 once var0; idx1 += inc0 */
++    0x7000000e, /* 001C(:1397):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */
++    0x010cf05f, /* 0020(:1397):      DRD2B1: var4 = EU3(); EU3(var1)  */
++    0x7000000c, /* 0024(:1398):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
++    0x01ccf05f, /* 0028(:1398):      DRD2B1: var7 = EU3(); EU3(var1)  */
++    0x70000004, /* 002C(:1399):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */
++    0x014cf049, /* 0030(:1399):      DRD2B1: var5 = EU3(); EU3(var1,var9)  */
++    0x70000004, /* 0034(:1400):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */
++    0x004cf04a, /* 0038(:1400):      DRD2B1: var1 = EU3(); EU3(var1,var10)  */
++    0x00000b88, /* 003C(:1403):      DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */
++    0xc4030150, /* 0040(:1406):    LCDEXT: idx1 = var8, idx2 = var6; idx1 < var5; idx1 += inc2, idx2 += inc0 */
++    0x8119e012, /* 0044(:1406):    LCD: idx3 = var2; ; idx3 += inc2 */
++    0x03e0cf90, /* 0048(:1409):      DRD1A: *idx3 = *idx2; FN=0 init=31 WS=0 RS=0 */
++    0x81188000, /* 004C(:1412):    LCD: idx1 = var2; idx1 once var0; idx1 += inc0 */
++    0x000ac788, /* 0050(:1413):      DRD1A: *idx1 = *idx1; FN=0 init=0 WS=1 RS=1 */
++    0xc4030000, /* 0054(:1415):    LCDEXT: idx1 = var8, idx2 = var6; idx1 once var0; idx1 += inc0, idx2 += inc0 */
++    0x8199e000, /* 0058(:1415):    LCD: idx3 = var3; ; idx3 += inc0 */
++    0x63e00004, /* 005C(:1418):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT init=31 WS=0 RS=0 */
++    0x084cfc8b, /* 0060(:1418):      DRD2B1: idx1 = EU3(); EU3(*idx2,var11)  */
++    0xd8990000, /* 0064(:1421):    LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */
++    0x9999e000, /* 0068(:1421):    LCD: idx3 = idx3; ; idx3 += inc0 */
++    0x60000005, /* 006C(:1422):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */
++    0x0cccf841, /* 0070(:1422):      DRD2B1: *idx3 = EU3(); EU3(idx1,var1)  */
++    0x81c60000, /* 0074(:1427):    LCD: idx1 = var3 + var12; idx1 once var0; idx1 += inc0 */
++    0xc399021b, /* 0078(:1429):      LCDEXT: idx2 = var7; idx2 > var8; idx2 += inc3 */
++    0x80198000, /* 007C(:1429):      LCD: idx3 = var0; idx3 once var0; idx3 += inc0 */
++    0x00008400, /* 0080(:1430):        DRD1A: idx1 = var0; FN=0 init=0 WS=0 RS=0 */
++    0x00000f08, /* 0084(:1431):      DRD1A: var3 = idx1; FN=0 init=0 WS=0 RS=0 */
++    0x81988000, /* 0088(:1434):    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
++    0x10000788, /* 008C(:1435):      DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
++    0x6000000a, /* 0090(:1436):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
++    0x080cf05f, /* 0094(:1436):      DRD2B1: idx0 = EU3(); EU3(var1)  */
++    0xc2188209, /* 0098(:1439):    LCDEXT: idx1 = var4; idx1 != var8; idx1 += inc1 */
++    0x80190000, /* 009C(:1439):    LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
++    0x040001f8, /* 00A0(:1440):      DRD1A: FN=0 INT init=0 WS=0 RS=0 */
++    0x000001f8, /* 00A4(:0):    NOP */
+ };
+ u32 MCD_ENetXmit_TDT[]=
+ {
+-    0x80004000, /* 0000(:1465):  LCDEXT: idx0 = 0x00000000; ; */
+-    0x81988000, /* 0004(:1465):  LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
+-    0x10000788, /* 0008(:1466):    DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x60000009, /* 000C(:1467):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT init=0 WS=0 RS=0 */
+-    0x080cf05f, /* 0010(:1467):    DRD2B1: idx0 = EU3(); EU3(var1)  */
+-    0x98180309, /* 0014(:1470):  LCD: idx0 = idx0; idx0 != var12; idx0 += inc1 */
+-    0x80004003, /* 0018(:1472):    LCDEXT: idx1 = 0x00000003; ; */
+-    0x81c60004, /* 001C(:1472):    LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */
+-    0x7000000d, /* 0020(:1473):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
+-    0x014cf05f, /* 0024(:1473):      DRD2B1: var5 = EU3(); EU3(var1)  */
+-    0x7000000b, /* 0028(:1474):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT MORE init=0 WS=0 RS=0 */
+-    0x028cf05f, /* 002C(:1474):      DRD2B1: var10 = EU3(); EU3(var1)  */
+-    0x7000000c, /* 0030(:1475):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
+-    0x018cf05f, /* 0034(:1475):      DRD2B1: var6 = EU3(); EU3(var1)  */
+-    0x70000004, /* 0038(:1476):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */
+-    0x01ccf04d, /* 003C(:1476):      DRD2B1: var7 = EU3(); EU3(var1,var13)  */
+-    0x10000b90, /* 0040(:1477):      DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x60000004, /* 0044(:1478):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT init=0 WS=0 RS=0 */
+-    0x020cf0a1, /* 0048(:1478):      DRD2B1: var8 = EU3(); EU3(var2,idx1)  */
+-    0xc3188312, /* 004C(:1481):    LCDEXT: idx1 = var6; idx1 > var12; idx1 += inc2 */
+-    0x83c70000, /* 0050(:1481):    LCD: idx2 = var7 + var14; idx2 once var0; idx2 += inc0 */
+-    0x00001f10, /* 0054(:1482):      DRD1A: var7 = idx2; FN=0 init=0 WS=0 RS=0 */
+-    0xc583a3c3, /* 0058(:1484):    LCDEXT: idx1 = var11, idx2 = var7; idx2 >= var15; idx1 += inc0, idx2 += inc3 */
+-    0x81042325, /* 005C(:1484):    LCD: idx3 = var2, idx4 = var8; idx4 == var12; idx3 += inc4, idx4 += inc5 */
+-    0x03e0c798, /* 0060(:1489):      DRD1A: *idx1 = *idx3; FN=0 init=31 WS=0 RS=0 */
+-    0xd8990000, /* 0064(:1492):    LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */
+-    0x9999e000, /* 0068(:1492):    LCD: idx3 = idx3; ; idx3 += inc0 */
+-    0x000acf98, /* 006C(:1493):      DRD1A: *idx3 = *idx3; FN=0 init=0 WS=1 RS=1 */
+-    0xd8992306, /* 0070(:1495):    LCDEXT: idx1 = idx1, idx2 = idx2; idx2 > var12; idx1 += inc0, idx2 += inc6 */
+-    0x9999e03f, /* 0074(:1495):    LCD: idx3 = idx3; ; idx3 += inc7 */
+-    0x03eac798, /* 0078(:1498):      DRD1A: *idx1 = *idx3; FN=0 init=31 WS=1 RS=1 */
+-    0xd8990000, /* 007C(:1501):    LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */
+-    0x9999e000, /* 0080(:1501):    LCD: idx3 = idx3; ; idx3 += inc0 */
+-    0x000acf98, /* 0084(:1502):      DRD1A: *idx3 = *idx3; FN=0 init=0 WS=1 RS=1 */
+-    0xd8990000, /* 0088(:1504):    LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */
+-    0x99832302, /* 008C(:1504):    LCD: idx3 = idx3, idx4 = var6; idx4 > var12; idx3 += inc0, idx4 += inc2 */
+-    0x0beac798, /* 0090(:1507):      DRD1A: *idx1 = *idx3; FN=0 TFD init=31 WS=1 RS=1 */
+-    0x81988000, /* 0094(:1509):    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
+-    0x6000000a, /* 0098(:1510):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
+-    0x0c4cfc5f, /* 009C(:1510):      DRD2B1: *idx1 = EU3(); EU3(*idx1)  */
+-    0x81c80000, /* 00A0(:1512):    LCD: idx1 = var3 + var16; idx1 once var0; idx1 += inc0 */
+-    0xc5190312, /* 00A4(:1514):      LCDEXT: idx2 = var10; idx2 > var12; idx2 += inc2 */
+-    0x80198000, /* 00A8(:1514):      LCD: idx3 = var0; idx3 once var0; idx3 += inc0 */
+-    0x00008400, /* 00AC(:1515):        DRD1A: idx1 = var0; FN=0 init=0 WS=0 RS=0 */
+-    0x00000f08, /* 00B0(:1516):      DRD1A: var3 = idx1; FN=0 init=0 WS=0 RS=0 */
+-    0x81988000, /* 00B4(:1519):    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
+-    0x10000788, /* 00B8(:1520):      DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
+-    0x60000009, /* 00BC(:1521):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=9 EXT init=0 WS=0 RS=0 */
+-    0x080cf05f, /* 00C0(:1521):      DRD2B1: idx0 = EU3(); EU3(var1)  */
+-    0xc2988309, /* 00C4(:1524):    LCDEXT: idx1 = var5; idx1 != var12; idx1 += inc1 */
+-    0x80190000, /* 00C8(:1524):    LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
+-    0x040001f8, /* 00CC(:1525):      DRD1A: FN=0 INT init=0 WS=0 RS=0 */
++    0x80004000, /* 0000(:1515):  LCDEXT: idx0 = 0x00000000; ; */
++    0x81988000, /* 0004(:1515):  LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
++    0x10000788, /* 0008(:1516):    DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
++    0x6000000a, /* 000C(:1517):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
++    0x080cf05f, /* 0010(:1517):    DRD2B1: idx0 = EU3(); EU3(var1)  */
++    0x98180309, /* 0014(:1520):  LCD: idx0 = idx0; idx0 != var12; idx0 += inc1 */
++    0x80004003, /* 0018(:1522):    LCDEXT: idx1 = 0x00000003; ; */
++    0x81c60004, /* 001C(:1522):    LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */
++    0x7000000e, /* 0020(:1523):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */
++    0x014cf05f, /* 0024(:1523):      DRD2B1: var5 = EU3(); EU3(var1)  */
++    0x7000000c, /* 0028(:1524):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */
++    0x028cf05f, /* 002C(:1524):      DRD2B1: var10 = EU3(); EU3(var1)  */
++    0x7000000d, /* 0030(:1525):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */
++    0x018cf05f, /* 0034(:1525):      DRD2B1: var6 = EU3(); EU3(var1)  */
++    0x70000004, /* 0038(:1526):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */
++    0x01ccf04d, /* 003C(:1526):      DRD2B1: var7 = EU3(); EU3(var1,var13)  */
++    0x10000b90, /* 0040(:1527):      DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */
++    0x60000004, /* 0044(:1528):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT init=0 WS=0 RS=0 */
++    0x020cf0a1, /* 0048(:1528):      DRD2B1: var8 = EU3(); EU3(var2,idx1)  */
++    0xc3188312, /* 004C(:1531):    LCDEXT: idx1 = var6; idx1 > var12; idx1 += inc2 */
++    0x83c70000, /* 0050(:1531):    LCD: idx2 = var7 + var14; idx2 once var0; idx2 += inc0 */
++    0x00001f10, /* 0054(:1532):      DRD1A: var7 = idx2; FN=0 init=0 WS=0 RS=0 */
++    0xc583a3c3, /* 0058(:1534):    LCDEXT: idx1 = var11, idx2 = var7; idx2 >= var15; idx1 += inc0, idx2 += inc3 */
++    0x81042325, /* 005C(:1534):    LCD: idx3 = var2, idx4 = var8; idx4 == var12; idx3 += inc4, idx4 += inc5 */
++    0x03e0c798, /* 0060(:1539):      DRD1A: *idx1 = *idx3; FN=0 init=31 WS=0 RS=0 */
++    0xd8990000, /* 0064(:1542):    LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */
++    0x9999e000, /* 0068(:1542):    LCD: idx3 = idx3; ; idx3 += inc0 */
++    0x000acf98, /* 006C(:1543):      DRD1A: *idx3 = *idx3; FN=0 init=0 WS=1 RS=1 */
++    0xd8992306, /* 0070(:1545):    LCDEXT: idx1 = idx1, idx2 = idx2; idx2 > var12; idx1 += inc0, idx2 += inc6 */
++    0x9999e03f, /* 0074(:1545):    LCD: idx3 = idx3; ; idx3 += inc7 */
++    0x03eac798, /* 0078(:1548):      DRD1A: *idx1 = *idx3; FN=0 init=31 WS=1 RS=1 */
++    0xd8990000, /* 007C(:1551):    LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */
++    0x9999e000, /* 0080(:1551):    LCD: idx3 = idx3; ; idx3 += inc0 */
++    0x000acf98, /* 0084(:1552):      DRD1A: *idx3 = *idx3; FN=0 init=0 WS=1 RS=1 */
++    0xd8990000, /* 0088(:1554):    LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */
++    0x99832302, /* 008C(:1554):    LCD: idx3 = idx3, idx4 = var6; idx4 > var12; idx3 += inc0, idx4 += inc2 */
++    0x0beac798, /* 0090(:1557):      DRD1A: *idx1 = *idx3; FN=0 TFD init=31 WS=1 RS=1 */
++    0x81988000, /* 0094(:1559):    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
++    0x6000000b, /* 0098(:1560):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT init=0 WS=0 RS=0 */
++    0x0c4cfc5f, /* 009C(:1560):      DRD2B1: *idx1 = EU3(); EU3(*idx1)  */
++    0x81c80000, /* 00A0(:1562):    LCD: idx1 = var3 + var16; idx1 once var0; idx1 += inc0 */
++    0xc5190312, /* 00A4(:1564):      LCDEXT: idx2 = var10; idx2 > var12; idx2 += inc2 */
++    0x80198000, /* 00A8(:1564):      LCD: idx3 = var0; idx3 once var0; idx3 += inc0 */
++    0x00008400, /* 00AC(:1565):        DRD1A: idx1 = var0; FN=0 init=0 WS=0 RS=0 */
++    0x00000f08, /* 00B0(:1566):      DRD1A: var3 = idx1; FN=0 init=0 WS=0 RS=0 */
++    0x81988000, /* 00B4(:1569):    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
++    0x10000788, /* 00B8(:1570):      DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
++    0x6000000a, /* 00BC(:1571):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */
++    0x080cf05f, /* 00C0(:1571):      DRD2B1: idx0 = EU3(); EU3(var1)  */
++    0xc2988309, /* 00C4(:1574):    LCDEXT: idx1 = var5; idx1 != var12; idx1 += inc1 */
++    0x80190000, /* 00C8(:1574):    LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
++    0x040001f8, /* 00CC(:1575):      DRD1A: FN=0 INT init=0 WS=0 RS=0 */
+     0x000001f8, /* 00D0(:0):    NOP */
+ };
+ 
++#ifdef MCD_INCLUDE_EU
++MCD_bufDesc MCD_singleBufDescs[NCHANNELS];
++#endif
+--- a/drivers/dma/MCD_tasksInit.c
++++ b/drivers/dma/MCD_tasksInit.c
+@@ -1,51 +1,34 @@
+-/*********************************************************************
+- *
+- * Copyright (C) 2004  Motorola, Inc.
+- *	MOTOROLA, INC. All Rights Reserved.  
+- *  You are hereby granted a copyright license to use
+- *  the SOFTWARE so long as this entire notice is
+- *  retained without alteration in any modified and/or redistributed
+- *  versions, and that such modified versions are clearly identified
+- *  as such. No licenses are granted by implication, estoppel or
+- *  otherwise under any patents or trademarks of Motorola, Inc. This 
+- *  software is provided on an "AS IS" basis and without warranty.
+- *
+- *  To the maximum extent permitted by applicable law, MOTOROLA 
+- *  DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING 
+- *  IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
+- *  PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE 
+- *  SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY 
+- *  ACCOMPANYING WRITTEN MATERIALS.
+- * 
+- *  To the maximum extent permitted by applicable law, IN NO EVENT
+- *  SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING 
+- *  WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS 
+- *  INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY
+- *  LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.   
+- * 
+- *  Motorola assumes no responsibility for the maintenance and support
+- *  of this software
+- ********************************************************************/
+ /*
+- * Do not edit!
+- */
+- /*
+- * File:		MCD_tasksInit.c
+- * Purpose:		Function for initialize variable tables of different
+- *              types of tasks.
++ * drivers/dma/MCD_tasksInit.c
+  *
+- * Notes:
++ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
++ *     Kurt Mahan <kmahan@freescale.com>
+  *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
+  *
+- * Modifications:
+- *  	
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
+  *
+- */ 
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
+ 
+-#include <asm/MCD_dma.h>
++/*
++ * Autogenerated - Do not edit!
++ */
++
++#include "MCD_dma.h"
+ 
+ extern dmaRegs *MCD_dmaBar;
+ 
++
+ /*
+  * Task 0
+  */
+@@ -53,232 +36,203 @@ extern dmaRegs *MCD_dmaBar;
+ void  MCD_startDmaChainNoEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel)
+ {
+ 
+-	MCD_SET_VAR(taskTable+channel, 2, (u32)currBD);	/* var[2] */
+-	MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));	/* inc[1] */
+-	MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));	/* inc[0] */
+-	MCD_SET_VAR(taskTable+channel, 19, (u32)xferSize);	/* var[19] */
+-	MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));	/* inc[2] */
+-	MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);	/* var[0] */
+-	MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000);	/* var[1] */
+-	MCD_SET_VAR(taskTable+channel, 3, (u32)0x00000000);	/* var[3] */
+-	MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000);	/* var[4] */
+-	MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000);	/* var[5] */
+-	MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000);	/* var[6] */
+-	MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000);	/* var[7] */
+-	MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000);	/* var[8] */
+-	MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000);	/* var[9] */
+-	MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);	/* var[10] */
+-	MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000000);	/* var[11] */
+-	MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000);	/* var[12] */
+-	MCD_SET_VAR(taskTable+channel, 13, (u32)0x00000000);	/* var[13] */
+-	MCD_SET_VAR(taskTable+channel, 14, (u32)0x00000000);	/* var[14] */
+-	MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000000);	/* var[15] */
+-	MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000000);	/* var[16] */
+-	MCD_SET_VAR(taskTable+channel, 17, (u32)0x00000000);	/* var[17] */
+-	MCD_SET_VAR(taskTable+channel, 18, (u32)0x00000000);	/* var[18] */
+-	MCD_SET_VAR(taskTable+channel, 20, (u32)0x00000000);	/* var[20] */
+-	MCD_SET_VAR(taskTable+channel, 21, (u32)0x00000010);	/* var[21] */
+-	MCD_SET_VAR(taskTable+channel, 22, (u32)0x00000004);	/* var[22] */
+-	MCD_SET_VAR(taskTable+channel, 23, (u32)0x00000080);	/* var[23] */
+-	MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);	/* inc[3] */
+-	MCD_SET_VAR(taskTable+channel, 28, (u32)0x60000000);	/* inc[4] */
+-	MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000001);	/* inc[5] */
+-	MCD_SET_VAR(taskTable+channel, 30, (u32)0x80000000);	/* inc[6] */
+-	MCD_SET_VAR(taskTable+channel, 31, (u32)0x40000000);	/* inc[7] */
++    MCD_SET_VAR(taskTable+channel, 2, (u32)currBD); /* var[2] */
++    MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));   /* inc[1] */
++    MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));  /* inc[0] */
++    MCD_SET_VAR(taskTable+channel, 11, (u32)xferSize);  /* var[11] */
++    MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));  /* inc[2] */
++    MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);  /* var[0] */
++    MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */
++    MCD_SET_VAR(taskTable+channel, 3, (u32)0x00000000); /* var[3] */
++    MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */
++    MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */
++    MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */
++    MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */
++    MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */
++    MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */
++    MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);    /* var[10] */
++    MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000);    /* var[12] */
++    MCD_SET_VAR(taskTable+channel, 13, (u32)0x80000000);    /* var[13] */
++    MCD_SET_VAR(taskTable+channel, 14, (u32)0x00000010);    /* var[14] */
++    MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000004);    /* var[15] */
++    MCD_SET_VAR(taskTable+channel, 16, (u32)0x08000000);    /* var[16] */
++    MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);    /* inc[3] */
++    MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000000);    /* inc[4] */
++    MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000001);    /* inc[5] */
++    MCD_SET_VAR(taskTable+channel, 30, (u32)0x40000000);    /* inc[6] */
+ 
+     /* Set the task's Enable bit in its Task Control Register */
+-    MCD_dmaBar->taskControl[channel] |= (u16)0x8000; /* add a MACRO HERE TBD*/
+-	
+-
++    MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
+ }
+ 
+ 
+ /*
+  * Task 1
+  */
+- 
+-void  MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, int dmaSizeMXferSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel)
++
++void  MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel)
+ {
+-	
+-	MCD_SET_VAR(taskTable+channel, 13, (u32)srcAddr);	/* var[13] */
+-	MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));	/* inc[1] */
+-	MCD_SET_VAR(taskTable+channel, 4, (u32)destAddr);	/* var[4] */
+-	MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));	/* inc[0] */
+-	MCD_SET_VAR(taskTable+channel, 6, (u32)dmaSize);	/* var[6] */
+-	MCD_SET_VAR(taskTable+channel, 7, (u32)dmaSizeMXferSize);	/* var[7] */
+-	MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));	/* inc[2] */
+-	MCD_SET_VAR(taskTable+channel, 9, (u32)flags);	/* var[9] */
+-	MCD_SET_VAR(taskTable+channel, 1, (u32)currBD);	/* var[1] */
+-	MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);	/* var[0] */
+-	MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000);	/* var[2] */
+-	MCD_SET_VAR(taskTable+channel, 3, (u32)0x00000000);	/* var[3] */
+-	MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000);	/* var[5] */
+-	MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000);	/* var[8] */
+-	MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);	/* var[10] */
+-	MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000000);	/* var[11] */
+-	MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000);	/* var[12] */
+-	MCD_SET_VAR(taskTable+channel, 14, (u32)0x00000000);	/* var[14] */
+-	MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000000);	/* var[15] */
+-	MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000004);	/* var[16] */
+-	MCD_SET_VAR(taskTable+channel, 17, (u32)0x00000080);	/* var[17] */
+-	MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);	/* inc[3] */
+-	MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000001);	/* inc[4] */
+-	MCD_SET_VAR(taskTable+channel, 29, (u32)0x40000000);	/* inc[5] */
+ 
++    MCD_SET_VAR(taskTable+channel, 7, (u32)srcAddr);    /* var[7] */
++    MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));   /* inc[1] */
++    MCD_SET_VAR(taskTable+channel, 2, (u32)destAddr);   /* var[2] */
++    MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));  /* inc[0] */
++    MCD_SET_VAR(taskTable+channel, 3, (u32)dmaSize);    /* var[3] */
++    MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));  /* inc[2] */
++    MCD_SET_VAR(taskTable+channel, 5, (u32)flags);  /* var[5] */
++    MCD_SET_VAR(taskTable+channel, 1, (u32)currBD); /* var[1] */
++    MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);  /* var[0] */
++    MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */
++    MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */
++    MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */
++    MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000004); /* var[9] */
++    MCD_SET_VAR(taskTable+channel, 10, (u32)0x08000000);    /* var[10] */
++    MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);    /* inc[3] */
++    MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000001);    /* inc[4] */
++    MCD_SET_VAR(taskTable+channel, 29, (u32)0x40000000);    /* inc[5] */
+ 
+-    /* enable the task */
+-    MCD_dmaBar->taskControl[channel] |= (u16)0x8000; /* add a MACRO HERE TBD*/
++    /* Set the task's Enable bit in its Task Control Register */
++    MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
+ }
+ 
+ 
+ /*
+  * Task 2
+  */
+- 
++
+ void  MCD_startDmaChainEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel)
+ {
+-	
+-	MCD_SET_VAR(taskTable+channel, 2, (u32)currBD);	/* var[2] */
+-	MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));	/* inc[1] */
+-	MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));	/* inc[0] */
+-	MCD_SET_VAR(taskTable+channel, 19, (u32)xferSize);	/* var[19] */
+-	MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));	/* inc[2] */
+-	MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);	/* var[0] */
+-	MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000);	/* var[1] */
+-	MCD_SET_VAR(taskTable+channel, 3, (u32)0x00000000);	/* var[3] */
+-	MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000);	/* var[4] */
+-	MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000);	/* var[5] */
+-	MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000);	/* var[6] */
+-	MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000);	/* var[7] */
+-	MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000);	/* var[8] */
+-	MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000);	/* var[9] */
+-	MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);	/* var[10] */
+-	MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000000);	/* var[11] */
+-	MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000);	/* var[12] */
+-	MCD_SET_VAR(taskTable+channel, 13, (u32)0x00000000);	/* var[13] */
+-	MCD_SET_VAR(taskTable+channel, 14, (u32)0x00000000);	/* var[14] */
+-	MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000000);	/* var[15] */
+-	MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000000);	/* var[16] */
+-	MCD_SET_VAR(taskTable+channel, 17, (u32)0x00000000);	/* var[17] */
+-	MCD_SET_VAR(taskTable+channel, 18, (u32)0x00000000);	/* var[18] */
+-	MCD_SET_VAR(taskTable+channel, 20, (u32)0x00000000);	/* var[20] */
+-	MCD_SET_VAR(taskTable+channel, 21, (u32)0x00000010);	/* var[21] */
+-	MCD_SET_VAR(taskTable+channel, 22, (u32)0x00000004);	/* var[22] */
+-	MCD_SET_VAR(taskTable+channel, 23, (u32)0x00000080);	/* var[23] */
+-	MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);	/* inc[3] */
+-	MCD_SET_VAR(taskTable+channel, 28, (u32)0x60000000);	/* inc[4] */
+-	MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000001);	/* inc[5] */
+-	MCD_SET_VAR(taskTable+channel, 30, (u32)0x80000000);	/* inc[6] */
+-	MCD_SET_VAR(taskTable+channel, 31, (u32)0x40000000);	/* inc[7] */
+ 
+-    /*enable the task*/
+-    MCD_dmaBar->taskControl[channel] |= (u16)0x8000; /* add a MACRO HERE TBD*/
++    MCD_SET_VAR(taskTable+channel, 3, (u32)currBD); /* var[3] */
++    MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));   /* inc[1] */
++    MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));  /* inc[0] */
++    MCD_SET_VAR(taskTable+channel, 12, (u32)xferSize);  /* var[12] */
++    MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));  /* inc[2] */
++    MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);  /* var[0] */
++    MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */
++    MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000); /* var[2] */
++    MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */
++    MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */
++    MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */
++    MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */
++    MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */
++    MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */
++    MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);    /* var[10] */
++    MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000000);    /* var[11] */
++    MCD_SET_VAR(taskTable+channel, 13, (u32)0x00000000);    /* var[13] */
++    MCD_SET_VAR(taskTable+channel, 14, (u32)0x80000000);    /* var[14] */
++    MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000010);    /* var[15] */
++    MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000001);    /* var[16] */
++    MCD_SET_VAR(taskTable+channel, 17, (u32)0x00000004);    /* var[17] */
++    MCD_SET_VAR(taskTable+channel, 18, (u32)0x08000000);    /* var[18] */
++    MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);    /* inc[3] */
++    MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000000);    /* inc[4] */
++    MCD_SET_VAR(taskTable+channel, 29, (u32)0xc0000000);    /* inc[5] */
++    MCD_SET_VAR(taskTable+channel, 30, (u32)0x80000001);    /* inc[6] */
++    MCD_SET_VAR(taskTable+channel, 31, (u32)0x40000000);    /* inc[7] */
++
++    /* Set the task's Enable bit in its Task Control Register */
++    MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
+ }
+ 
+ 
+ /*
+  * Task 3
+  */
+- 
+-void  MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, int dmaSizeMXferSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel)
++
++void  MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel)
+ {
+-	
+-	MCD_SET_VAR(taskTable+channel, 13, (u32)srcAddr);	/* var[13] */
+-	MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));	/* inc[1] */
+-	MCD_SET_VAR(taskTable+channel, 4, (u32)destAddr);	/* var[4] */
+-	MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));	/* inc[0] */
+-	MCD_SET_VAR(taskTable+channel, 6, (u32)dmaSize);	/* var[6] */
+-	MCD_SET_VAR(taskTable+channel, 7, (u32)dmaSizeMXferSize);	/* var[7] */
+-	MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));	/* inc[2] */
+-	MCD_SET_VAR(taskTable+channel, 9, (u32)flags);	/* var[9] */
+-	MCD_SET_VAR(taskTable+channel, 1, (u32)currBD);	/* var[1] */
+-	MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);	/* var[0] */
+-	MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000);	/* var[2] */
+-	MCD_SET_VAR(taskTable+channel, 3, (u32)0x00000000);	/* var[3] */
+-	MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000);	/* var[5] */
+-	MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000);	/* var[8] */
+-	MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);	/* var[10] */
+-	MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000000);	/* var[11] */
+-	MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000);	/* var[12] */
+-	MCD_SET_VAR(taskTable+channel, 14, (u32)0x00000000);	/* var[14] */
+-	MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000000);	/* var[15] */
+-	MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000004);	/* var[16] */
+-	MCD_SET_VAR(taskTable+channel, 17, (u32)0x00000080);	/* var[17] */
+-	MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);	/* inc[3] */
+-	MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000001);	/* inc[4] */
+-	MCD_SET_VAR(taskTable+channel, 29, (u32)0x40000000);	/* inc[5] */
+ 
+-    /*enable the task*/
+-    MCD_dmaBar->taskControl[channel] |= (u16)0x8000; /* add a MACRO HERE TBD*/
++    MCD_SET_VAR(taskTable+channel, 8, (u32)srcAddr);    /* var[8] */
++    MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr));   /* inc[1] */
++    MCD_SET_VAR(taskTable+channel, 3, (u32)destAddr);   /* var[3] */
++    MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr));  /* inc[0] */
++    MCD_SET_VAR(taskTable+channel, 4, (u32)dmaSize);    /* var[4] */
++    MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr));  /* inc[2] */
++    MCD_SET_VAR(taskTable+channel, 6, (u32)flags);  /* var[6] */
++    MCD_SET_VAR(taskTable+channel, 2, (u32)currBD); /* var[2] */
++    MCD_SET_VAR(taskTable+channel, 0, (u32)cSave);  /* var[0] */
++    MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */
++    MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */
++    MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */
++    MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */
++    MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000001);    /* var[10] */
++    MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000004);    /* var[11] */
++    MCD_SET_VAR(taskTable+channel, 12, (u32)0x08000000);    /* var[12] */
++    MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000);    /* inc[3] */
++    MCD_SET_VAR(taskTable+channel, 28, (u32)0xc0000000);    /* inc[4] */
++    MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000000);    /* inc[5] */
++    MCD_SET_VAR(taskTable+channel, 30, (u32)0x80000001);    /* inc[6] */
++    MCD_SET_VAR(taskTable+channel, 31, (u32)0x40000000);    /* inc[7] */
+ 
++    /* Set the task's Enable bit in its Task Control Register */
++    MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
+ }
+ 
+ 
+ /*
+  * Task 4
+  */
+- 
++
+ void  MCD_startDmaENetRcv(char *bDBase, char *currBD, char *rcvFifoPtr, volatile TaskTableEntry *taskTable, int channel)
+ {
+-	
+-	MCD_SET_VAR(taskTable+channel, 0, (u32)bDBase);	/* var[0] */
+-	MCD_SET_VAR(taskTable+channel, 4, (u32)currBD);	/* var[4] */
+-	MCD_SET_VAR(taskTable+channel, 7, (u32)rcvFifoPtr);	/* var[7] */
+-	MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000);	/* var[1] */
+-	MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000);	/* var[2] */
+-	MCD_SET_VAR(taskTable+channel, 3, (u32)0x00000000);	/* var[3] */
+-	MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000);	/* var[5] */
+-	MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000);	/* var[6] */
+-	MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000);	/* var[8] */
+-	MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000);	/* var[9] */
+-	MCD_SET_VAR(taskTable+channel, 10, (u32)0x0000ffff);	/* var[10] */
+-	MCD_SET_VAR(taskTable+channel, 11, (u32)0x30000000);	/* var[11] */
+-	MCD_SET_VAR(taskTable+channel, 12, (u32)0x0fffffff);	/* var[12] */
+-	MCD_SET_VAR(taskTable+channel, 13, (u32)0x00000008);	/* var[13] */
+-	MCD_SET_VAR(taskTable+channel, 24, (u32)0x00000000);	/* inc[0] */
+-	MCD_SET_VAR(taskTable+channel, 25, (u32)0x60000000);	/* inc[1] */
+-	MCD_SET_VAR(taskTable+channel, 26, (u32)0x20000004);	/* inc[2] */
+-	MCD_SET_VAR(taskTable+channel, 27, (u32)0x40000000);	/* inc[3] */
+-    /*enable the task*/
+-    MCD_dmaBar->taskControl[channel] |= (u16)0x8000; /* add a MACRO HERE TBD*/
+ 
++    MCD_SET_VAR(taskTable+channel, 0, (u32)bDBase); /* var[0] */
++    MCD_SET_VAR(taskTable+channel, 3, (u32)currBD); /* var[3] */
++    MCD_SET_VAR(taskTable+channel, 6, (u32)rcvFifoPtr); /* var[6] */
++    MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */
++    MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000); /* var[2] */
++    MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */
++    MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */
++    MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */
++    MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */
++    MCD_SET_VAR(taskTable+channel, 9, (u32)0x0000ffff); /* var[9] */
++    MCD_SET_VAR(taskTable+channel, 10, (u32)0x30000000);    /* var[10] */
++    MCD_SET_VAR(taskTable+channel, 11, (u32)0x0fffffff);    /* var[11] */
++    MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000008);    /* var[12] */
++    MCD_SET_VAR(taskTable+channel, 24, (u32)0x00000000);    /* inc[0] */
++    MCD_SET_VAR(taskTable+channel, 25, (u32)0x60000000);    /* inc[1] */
++    MCD_SET_VAR(taskTable+channel, 26, (u32)0x20000004);    /* inc[2] */
++    MCD_SET_VAR(taskTable+channel, 27, (u32)0x40000000);    /* inc[3] */
++
++    /* Set the task's Enable bit in its Task Control Register */
++    MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
+ }
+ 
+ 
+ /*
+  * Task 5
+  */
+- 
++
+ void  MCD_startDmaENetXmit(char *bDBase, char *currBD, char *xmitFifoPtr, volatile TaskTableEntry *taskTable, int channel)
+ {
+-	
+-	MCD_SET_VAR(taskTable+channel, 0, (u32)bDBase);	/* var[0] */
+-	MCD_SET_VAR(taskTable+channel, 3, (u32)currBD);	/* var[3] */
+-	MCD_SET_VAR(taskTable+channel, 11, (u32)xmitFifoPtr);	/* var[11] */
+-	MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000);	/* var[1] */
+-	MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000);	/* var[2] */
+-	MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000);	/* var[4] */
+-	MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000);	/* var[5] */
+-	MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000);	/* var[6] */
+-	MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000);	/* var[7] */
+-	MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000);	/* var[8] */
+-	MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000);	/* var[9] */
+-	MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);	/* var[10] */
+-	MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000);	/* var[12] */
+-	MCD_SET_VAR(taskTable+channel, 13, (u32)0x0000ffff);	/* var[13] */
+-	MCD_SET_VAR(taskTable+channel, 14, (u32)0xffffffff);	/* var[14] */
+-	MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000004);	/* var[15] */
+-	MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000008);	/* var[16] */
+-	MCD_SET_VAR(taskTable+channel, 24, (u32)0x00000000);	/* inc[0] */
+-	MCD_SET_VAR(taskTable+channel, 25, (u32)0x60000000);	/* inc[1] */
+-	MCD_SET_VAR(taskTable+channel, 26, (u32)0x40000000);	/* inc[2] */
+-	MCD_SET_VAR(taskTable+channel, 27, (u32)0xc000fffc);	/* inc[3] */
+-	MCD_SET_VAR(taskTable+channel, 28, (u32)0xe0000004);	/* inc[4] */
+-	MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000000);	/* inc[5] */
+-	MCD_SET_VAR(taskTable+channel, 30, (u32)0x4000ffff);	/* inc[6] */
+-	MCD_SET_VAR(taskTable+channel, 31, (u32)0xe0000001);	/* inc[7] */
+ 
+-    /*enable the task*/
+-    MCD_dmaBar->taskControl[channel] |= (u16)0x8000; /* add a MACRO HERE TBD*/
++    MCD_SET_VAR(taskTable+channel, 0, (u32)bDBase); /* var[0] */
++    MCD_SET_VAR(taskTable+channel, 3, (u32)currBD); /* var[3] */
++    MCD_SET_VAR(taskTable+channel, 11, (u32)xmitFifoPtr);   /* var[11] */
++    MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */
++    MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000); /* var[2] */
++    MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */
++    MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */
++    MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */
++    MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */
++    MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */
++    MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */
++    MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000);    /* var[10] */
++    MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000);    /* var[12] */
++    MCD_SET_VAR(taskTable+channel, 13, (u32)0x0000ffff);    /* var[13] */
++    MCD_SET_VAR(taskTable+channel, 14, (u32)0xffffffff);    /* var[14] */
++    MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000004);    /* var[15] */
++    MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000008);    /* var[16] */
++    MCD_SET_VAR(taskTable+channel, 24, (u32)0x00000000);    /* inc[0] */
++    MCD_SET_VAR(taskTable+channel, 25, (u32)0x60000000);    /* inc[1] */
++    MCD_SET_VAR(taskTable+channel, 26, (u32)0x40000000);    /* inc[2] */
++    MCD_SET_VAR(taskTable+channel, 27, (u32)0xc000fffc);    /* inc[3] */
++    MCD_SET_VAR(taskTable+channel, 28, (u32)0xe0000004);    /* inc[4] */
++    MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000000);    /* inc[5] */
++    MCD_SET_VAR(taskTable+channel, 30, (u32)0x4000ffff);    /* inc[6] */
++    MCD_SET_VAR(taskTable+channel, 31, (u32)0xe0000001);    /* inc[7] */
+ 
++    /* Set the task's Enable bit in its Task Control Register */
++    MCD_dmaBar->taskControl[channel] |= (u16)0x8000;
+ }
+--- a/drivers/dma/MCD_tasksInit.h
++++ b/drivers/dma/MCD_tasksInit.h
+@@ -1,40 +1,31 @@
+-/*********************************************************************
++/*
++ * drivers/dma/MCD_tasksInit.h
+  *
+- * Copyright (C) 2004  Motorola, Inc.
+- *  MOTOROLA, INC. All Rights Reserved.
+- *  You are hereby granted a copyright license to use
+- *  the SOFTWARE so long as this entire notice is
+- *  retained without alteration in any modified and/or redistributed
+- *  versions, and that such modified versions are clearly identified
+- *  as such. No licenses are granted by implication, estoppel or
+- *  otherwise under any patents or trademarks of Motorola, Inc. This
+- *  software is provided on an "AS IS" basis and without warranty.
++ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
++ *     Kurt Mahan <kmahan@freescale.com>
+  *
+- *  To the maximum extent permitted by applicable law, MOTOROLA
+- *  DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING
+- *  IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
+- *  PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE
+- *  SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY
+- *  ACCOMPANYING WRITTEN MATERIALS.
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
+  *
+- *  To the maximum extent permitted by applicable law, IN NO EVENT
+- *  SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING
+- *  WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
+- *  INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY
+- *  LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
+  *
+- *  Motorola assumes no responsibility for the maintenance and support
+- *  of this software
+- ********************************************************************/
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
+ #ifndef MCD_TSK_INIT_H
+ #define MCD_TSK_INIT_H 1
+ 
+ /*
+- * Do not edit!
++ * Autogenerated - Do not edit!
+  */
+ 
+-
+-
+ /*
+  * Task 0
+  */
+@@ -44,7 +35,7 @@ void  MCD_startDmaChainNoEu(int *currBD,
+ /*
+  * Task 1
+  */
+-void  MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, int dmaSizeMXferSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel);
++void  MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel);
+ 
+ 
+ /*
+@@ -56,7 +47,7 @@ void  MCD_startDmaChainEu(int *currBD, s
+ /*
+  * Task 3
+  */
+-void  MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, int dmaSizeMXferSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel);
++void  MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel);
+ 
+ 
+ /*
diff --git a/target/linux/coldfire/patches/052-m547x_8x_dspi.patch b/target/linux/coldfire/patches/052-m547x_8x_dspi.patch
new file mode 100644
index 0000000000..c9277f8cb7
--- /dev/null
+++ b/target/linux/coldfire/patches/052-m547x_8x_dspi.patch
@@ -0,0 +1,1137 @@
+From acc2bc0cd419c176820d4a384eb36498a066366d Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 30 Apr 2008 14:20:48 -0600
+Subject: [PATCH] DSPI support for M547x/M548x.
+
+LTIBName: m547x-8x-dspi
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/Makefile           |    1 +
+ arch/m68k/coldfire/m547x_8x-devices.c |  150 +++++++++++++
+ drivers/spi/Makefile                  |    3 +-
+ drivers/spi/spi_coldfire.c            |  382 ++++++++++++++++-----------------
+ include/asm-m68k/m5485dspi.h          |  144 +++++++++++++
+ include/asm-m68k/mcfqspi.h            |    1 +
+ include/asm-m68k/mcfsim.h             |    1 +
+ 7 files changed, 485 insertions(+), 197 deletions(-)
+ create mode 100644 arch/m68k/coldfire/m547x_8x-devices.c
+ create mode 100644 include/asm-m68k/m5485dspi.h
+
+--- a/arch/m68k/coldfire/Makefile
++++ b/arch/m68k/coldfire/Makefile
+@@ -10,4 +10,5 @@ endif
+ 
+ obj-$(CONFIG_PCI)	+= pci.o mcf5445x-pci.o iomap.o
+ obj-$(CONFIG_M54455)	+= mcf5445x-devices.o
++obj-$(CONFIG_M547X_8X)	+= m547x_8x-devices.o
+ obj-$(CONFIG_MCD_DMA)	+= m547x_8x-dma.o
+--- /dev/null
++++ b/arch/m68k/coldfire/m547x_8x-devices.c
+@@ -0,0 +1,150 @@
++/*
++ * arch/m68k/coldfire/m547x_8x-devices.c
++ *
++ * Coldfire M547x/M548x Platform Device Configuration
++ *
++ * Copyright (c) 2008 Freescale Semiconductor, Inc.
++ *	Kurt Mahan <kmahan@freescale.com>
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/fsl_devices.h>
++#include <linux/spi/spi.h>
++
++#include <asm/coldfire.h>
++#include <asm/mcfsim.h>
++#include <asm/mcfqspi.h>
++
++
++#ifdef CONFIG_SPI
++/*
++ *
++ * DSPI
++ *
++ */
++
++/* number of supported SPI selects */
++#define SPI_NUM_CHIPSELECTS	4
++
++void coldfire_spi_cs_control(u8 cs, u8 command)
++{
++	/* nothing special required */
++}
++
++static struct spi_board_info spi_board_info[] = {
++	/* no board info */
++};
++
++static int spi_irq_list[] = {
++	/* IRQ, ICR Offset, ICR Val, Mask */
++	64 + ISC_DSPI_OVRFW, 0, 0, 0,
++	64 + ISC_DSPI_RFOF,  0, 0, 0,
++	64 + ISC_DSPI_RFDF,  0, 0, 0,
++	64 + ISC_DSPI_TFUF,  0, 0, 0,
++	64 + ISC_DSPI_TCF,   0, 0, 0,
++	64 + ISC_DSPI_TFFF,  0, 0, 0,
++	64 + ISC_DSPI_EOQF,  0, 0, 0,
++	0,0,0,0,
++};
++
++static struct coldfire_spi_master coldfire_master_info = {
++	.bus_num = 1,
++	.num_chipselect = SPI_NUM_CHIPSELECTS,
++	.irq_list = spi_irq_list,
++	.irq_source = 0,	/* not used */
++	.irq_vector = 0,	/* not used */
++	.irq_mask = 0,		/* not used */
++	.irq_lp = 0,		/* not used */
++	.par_val = 0,		/* not used */
++	.cs_control = coldfire_spi_cs_control,
++};
++
++static struct resource coldfire_spi_resources[] = {
++	[0] = {
++		.name = "spi-par",
++		.start = MCF_MBAR + 0x00000a50,	/* PAR_DSPI */
++		.end = MCF_MBAR + 0x00000a50,	/* PAR_DSPI */
++		.flags = IORESOURCE_MEM
++	},
++
++	[1] = {
++		.name = "spi-module",
++		.start = MCF_MBAR + 0x00008a00,	/* DSPI MCR Base */
++		.end = MCF_MBAR + 0x00008ab8,	/* DSPI mem map end */
++		.flags = IORESOURCE_MEM
++	},
++
++	[2] = {
++		.name = "spi-int-level",
++		.start = MCF_MBAR + 0x740,		 /* ICR start */
++		.end = MCF_MBAR + 0x740 + ISC_DSPI_EOQF, /* ICR end */
++		.flags = IORESOURCE_MEM
++	},
++
++	[3] = {
++		.name = "spi-int-mask",
++		.start = MCF_MBAR + 0x70c,	/* IMRL */
++		.end = MCF_MBAR + 0x70c,	/* IMRL */
++		.flags = IORESOURCE_MEM
++	}
++};
++
++static struct platform_device coldfire_spi = {
++	.name = "spi_coldfire",
++	.id = -1,
++	.resource = coldfire_spi_resources,
++	.num_resources = ARRAY_SIZE(coldfire_spi_resources),
++	.dev = {
++		.platform_data = &coldfire_master_info,
++	}
++};
++
++/**
++ * m547x_8x_spi_init - Initialize SPI
++ */
++static int __init m547x_8x_spi_init(void)
++{
++	int retval;
++
++	/* initialize the DSPI PAR */
++	MCF_GPIO_PAR_DSPI = (MCF_GPIO_PAR_DSPI_PAR_CS5 |
++			     MCF_GPIO_PAR_DSPI_PAR_CS3_DSPICS |
++			     MCF_GPIO_PAR_DSPI_PAR_CS2_DSPICS |
++			     MCF_GPIO_PAR_DSPI_PAR_CS0_DSPICS |
++			     MCF_GPIO_PAR_DSPI_PAR_SCK_SCK |
++			     MCF_GPIO_PAR_DSPI_PAR_SIN_SIN |
++			     MCF_GPIO_PAR_DSPI_PAR_SOUT_SOUT);
++
++	/* register device */
++	retval = platform_device_register(&coldfire_spi);
++	if (retval < 0) {
++		printk(KERN_ERR "SPI-m547x_8x: platform_device_register failed with code=%d\n", retval);
++		goto out;
++	}
++
++	/* register board info */
++	if (ARRAY_SIZE(spi_board_info))
++		retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
++
++out:
++	return retval;
++}
++#endif
++
++
++/**
++ * m547x_8x_init_devices - Initialize M547X_8X devices
++ *
++ * Returns 0 on success.
++ */
++static int __init m547x_8x_init_devices(void)
++{
++#ifdef CONFIG_SPI
++	m547x_8x_spi_init();
++#endif
++
++	return 0;
++}
++arch_initcall(m547x_8x_init_devices);
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -18,7 +18,8 @@ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.
+ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
+ obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
+ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
+-obj-$(CONFIG_SPI_COLDFIRE)		+= spi_coldfire.o spi-m5445x.o
++# obj-$(CONFIG_SPI_COLDFIRE)		+= spi_coldfire.o spi-m5445x.o
++obj-$(CONFIG_SPI_COLDFIRE)		+= spi_coldfire.o
+ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
+ obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
+--- a/drivers/spi/spi_coldfire.c
++++ b/drivers/spi/spi_coldfire.c
+@@ -1,29 +1,39 @@
+-/****************************************************************************/
+-
+ /*
+- *	spi_coldfire.c - Master QSPI/DSPI controller for the ColdFire processors
++ * spi_coldfire.c - Master QSPI/DSPI controller for the ColdFire processors
++ *
+  *
+  *	(C) Copyright 2005, Intec Automation,
+  *			    Mike Lavender (mike@steroidmicros)
+  *
+- *	(C) Copyright 2007, Freescale Inc,
+- *			    Yaroslav Vinogradov (yaroslav.vinogradov@freescale.com)
++ *	(C) Copyright 2007-2008, Freescale Inc,
++ *			Yaroslav Vinogradov
++ *			Andrey Butok
++ *			Kurt Mahan
+  *
+-
+-     This program is free software; you can redistribute it and/or modify
+-     it under the terms of the GNU General Public License as published by
+-     the Free Software Foundation; either version 2 of the License, or
+-     (at your option) any later version.
+-
+-     This program is distributed in the hope that it will be useful,
+-     but WITHOUT ANY WARRANTY; without even the implied warranty of
+-     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+-     GNU General Public License for more details.
+-
+-     You should have received a copy of the GNU General Public License
+-     along with this program; if not, write to the Free Software
+-     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
+-/* ------------------------------------------------------------------------- */
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ ***************************************************************************
++ * Changes:
++ *   v0.003	12 February 2008	Andrey Butok, Freescale Semiconductor
++ *   		Added suport of MCF5227x DSPI module.
++ *   v0.002	2007	Yaroslav Vinogradov, Freescale Semiconductor
++ *   		Added suport of MCF5445x DSPI module.
++ *   v0.001	2005		Mike Lavender, Intec Automation,
++ *   		Intial version. Coldfire QSPI master driver.
++ *
++ */
+ 
+ 
+ /****************************************************************************/
+@@ -46,41 +56,52 @@
+ #include <asm/mcfsim.h>
+ #include <asm/mcfqspi.h>
+ #include <asm/coldfire.h>
+-#include <asm/virtconvert.h>
+ 
+ #if defined(CONFIG_M54455)
++	#include <asm/virtconvert.h>
++
+ 	#define SPI_DSPI
+ 	#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
+ 		#define SPI_DSPI_EDMA
+ 		#ifdef CONFIG_MMU
+ 			#define SPI_USE_MMU
+ 		#endif
++		#include <asm/mcf5445x_edma.h>
+ 	#endif
++
++	#include <asm/mcf5445x_dspi.h>
+ #endif
+ 
+-#ifdef SPI_DSPI
+-#include <asm/mcf5445x_dspi.h>
++#if defined(CONFIG_M547X_8X)
++	#define SPI_DSPI
++
++	#include <asm/virtconvert.h>
++	#include <asm/m5485dspi.h>
++#endif
+ 
++#ifdef CONFIG_M5227x
++	#define SPI_DSPI
+ 
++	#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
++		#define SPI_DSPI_EDMA
++	#endif
+ #endif
+ 
++
+ #if defined(SPI_DSPI_EDMA)
+ 
+ /* edma buffer size in transfer units (32bits) */
+ #define EDMA_BUFFER_SIZE	(PAGE_SIZE/4)
+-#define EDMA_BUFSIZE_KMALLOC (EDMA_BUFFER_SIZE*4)
+-
+-#define DSPI_DMA_RX_TCD	12
+-#define DSPI_DMA_TX_TCD 13
++#define EDMA_BUFSIZE_KMALLOC	(EDMA_BUFFER_SIZE*4)
+ 
++#define DSPI_DMA_RX_TCD		MCF_EDMA_CHAN_DSPI_RX
++#define DSPI_DMA_TX_TCD 	MCF_EDMA_CHAN_DSPI_TX
+ 
+-#include <asm/coldfire_edma.h>
+-#include <asm/mcf5445x_edma.h>
++#include <asm/mcf_edma.h>
+ #endif
+ 
+-
+ MODULE_AUTHOR("Mike Lavender");
+-MODULE_DESCRIPTION("ColdFire QSPI Contoller");
++MODULE_DESCRIPTION("ColdFire SPI Contoller");
+ MODULE_LICENSE("GPL");
+ 
+ #define DRIVER_NAME "Coldfire QSPI/DSPI"
+@@ -92,7 +113,6 @@ MODULE_LICENSE("GPL");
+  */
+ 
+ #define QSPI_RAM_SIZE		0x10    /* 16 word table */
+-
+ #define QSPI_TRANSMIT_RAM 	0x00
+ #define QSPI_RECEIVE_RAM  	0x10
+ #define QSPI_COMMAND_RAM  	0x20
+@@ -296,13 +316,10 @@ struct driver_data {
+ 	u32 *dspi_rser;		/* DSPI RSER register */
+ 	u32 *dspi_sr;		/* DSPI status register */
+ 	u8	dspi_ctas;		/* DSPI CTAS value*/
+-	
+ #if defined(SPI_DSPI_EDMA)
+ 	void*	edma_tx_buf;
+ 	void*	edma_rx_buf;
+ #endif
+-	
+-		
+ #else
+  	u16 *qmr;          /* QSPI mode register      */
+  	u16 *qdlyr;        /* QSPI delay register     */
+@@ -312,7 +329,11 @@ struct driver_data {
+  	u16 *qdr;          /* QSPI data register      */
+  	u16 *qcr;	   /* QSPI command register   */
+ #endif
++#if defined(CONFIG_M532x) || defined(CONFIG_M537x)
++ 	u16 *par;	   /* Pin assignment register */
++#else
+  	u8  *par;	   /* Pin assignment register */
++#endif
+  	u8  *int_icr;	   /* Interrupt level and priority register */
+  	u32 *int_mr;       /* Interrupt mask register */
+  	void (*cs_control)(u8 cs, u8 command);
+@@ -327,8 +348,6 @@ struct driver_data {
+  * SPI local functions
+  */
+ 
+-//#define SPI_COLDFIRE_DEBUG
+-
+ static void *next_transfer(struct driver_data *drv_data)
+ {
+ 	struct spi_message *msg = drv_data->cur_msg;
+@@ -387,11 +406,9 @@ static int write(struct driver_data *drv
+  	int tx_word;
+ 
+ #if defined(SPI_DSPI)
+-
+ #if defined(SPI_DSPI_EDMA)
+ 	u32* edma_wr;
+ #endif
+-
+  	u16 d16;
+  	u8  d8;
+  	u32 dspi_pushr;
+@@ -400,9 +417,9 @@ static int write(struct driver_data *drv
+ 
+ 	tx_word = is_word_transfer(drv_data);
+ 
+-	// If we are in word mode, but only have a single byte to transfer
+-	// then switch to byte mode temporarily.  Will switch back at the
+-	// end of the transfer.
++	/* If we are in word mode, but only have a single byte to transfer
++	 * then switch to byte mode temporarily.  Will switch back at the
++	 * end of the transfer. */
+  	if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1)) {
+  		drv_data->flags |= TRAN_STATE_WORD_ODD_NUM;
+  		set_8bit_transfer_mode(drv_data);
+@@ -411,12 +428,10 @@ static int write(struct driver_data *drv
+ 
+ 
+ #if defined(SPI_DSPI)
+-
+ #if defined(SPI_DSPI_EDMA)
+ 	edma_wr = (u32*)(drv_data->edma_tx_buf);
+ #endif
+ 
+-
+ #if defined(SPI_DSPI_EDMA)
+ 	while ((drv_data->tx < drv_data->tx_end) && (tx_count < EDMA_BUFFER_SIZE)) {
+ #else
+@@ -432,19 +447,16 @@ static int write(struct driver_data *drv
+ 			}
+ 
+ 			dspi_pushr = MCF_DSPI_DTFR_TXDATA(d16)
+-						  | DSPI_CS(drv_data->cs)
+-						 | MCF_DSPI_DTFR_CTAS(drv_data->dspi_ctas)
+-						 //| MCF_DSPI_DTFR_CONT
+-						 ;
+-
++					| DSPI_CS(drv_data->cs)
++					| MCF_DSPI_DTFR_CTAS(drv_data->dspi_ctas);
+ 			drv_data->tx += 2;
+ 
+ #if defined(SPI_DSPI_EDMA)
+ 			if (drv_data->tx == drv_data->tx_end  || tx_count==EDMA_BUFFER_SIZE-1) {
+-#else			
++#else
+ 			if (drv_data->tx == drv_data->tx_end  || tx_count==DSPI_FIFO_SIZE-1) {
+-#endif				
+-				// last transfer in queue
++#endif
++				/* last transfer in the queue */
+ 				dspi_pushr |= MCF_DSPI_DTFR_EOQ;
+ 				if (drv_data->cs_change) {
+ 					dspi_pushr &= ~MCF_DSPI_DTFR_CONT;
+@@ -453,14 +465,13 @@ static int write(struct driver_data *drv
+ 
+ 			if (first) {
+ 				first = 0;
+-				dspi_pushr |= MCF_DSPI_DTFR_CTCNT; // clear counter
++				dspi_pushr |= MCF_DSPI_DTFR_CTCNT; /* clear counter */
+ 			}
+ #if defined(SPI_DSPI_EDMA)
+ 			*edma_wr = dspi_pushr;
+-			edma_wr++;			
++			edma_wr++;
+ #else
+ 			*drv_data->dspi_dtfr = dspi_pushr;
+-			//MCF_DSPI_DTFR = dspi_pushr;
+ #endif
+ 
+ 
+@@ -473,14 +484,13 @@ static int write(struct driver_data *drv
+ 
+ 			dspi_pushr = MCF_DSPI_DTFR_TXDATA(d8)
+ 						 | DSPI_CS(drv_data->cs)
+-						 /* | MCF_DSPI_DTFR_PCS5 | */
+ 						 | MCF_DSPI_DTFR_CTAS(drv_data->dspi_ctas)
+ 						 | MCF_DSPI_DTFR_CONT;
+ 
+ 			drv_data->tx++;
+ 
+ 			if (drv_data->tx == drv_data->tx_end  || tx_count==DSPI_FIFO_SIZE-1) {
+-				// last transfer in queue
++				/* last transfer in the queue */
+ 				dspi_pushr |= MCF_DSPI_DTFR_EOQ;
+ 				if (drv_data->cs_change) {
+ 					dspi_pushr &= ~MCF_DSPI_DTFR_CONT;
+@@ -489,16 +499,15 @@ static int write(struct driver_data *drv
+ 
+ 			if (first) {
+ 				first = 0;
+-				dspi_pushr |= MCF_DSPI_DTFR_CTCNT; // clear counter
++				dspi_pushr |= MCF_DSPI_DTFR_CTCNT; /* clear counter */
+ 			}
+ 
+ #if defined(SPI_DSPI_EDMA)
+ 			*edma_wr = dspi_pushr;
+-			edma_wr++;			
+-#else			
++			edma_wr++;
++#else
+ 			*drv_data->dspi_dtfr = dspi_pushr;
+-			//MCF_DSPI_DTFR = dspi_pushr;
+-#endif			
++#endif
+ 
+ 		}
+ 		tx_count++;
+@@ -508,8 +517,8 @@ static int write(struct driver_data *drv
+ 
+ 	if (tx_count>0) {
+ 
+-		// TODO: initiate eDMA transfer
+-		set_edma_params(DSPI_DMA_TX_TCD,
++		/* TBD: initiate eDMA transfer */
++		mcf_edma_set_tcd_params(DSPI_DMA_TX_TCD,
+ #ifdef SPI_USE_MMU
+ 					virt_to_phys(drv_data->edma_tx_buf),
+ #else
+@@ -517,18 +526,18 @@ static int write(struct driver_data *drv
+ #endif
+ 					(u32)drv_data->dspi_dtfr,
+ 					MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
+-					4,  // soff
+-					4,  // nbytes
+-					0,  // slast
+-					tx_count, // citer
+-					tx_count, // biter
+-					0, // doff
+-					0, // dlastsga
+-					0, // major_int
+-					1  // disable_req
++					4, /* soff */
++					4, /* nbytes */
++					0, /* slast */
++					tx_count, /* citer */
++					tx_count, /* biter */
++					0, /* doff */
++					0, /* dlastsga */
++					0, /* major_int */
++					1  /* disable_req */
+ 					);
+ 
+-		set_edma_params(DSPI_DMA_RX_TCD,
++		mcf_edma_set_tcd_params(DSPI_DMA_RX_TCD,
+ 					(u32)drv_data->dspi_drfr,
+ #ifdef SPI_USE_MMU
+ 					virt_to_phys(drv_data->edma_rx_buf),
+@@ -536,20 +545,20 @@ static int write(struct driver_data *drv
+ 					drv_data->edma_rx_buf,
+ #endif
+ 					MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
+-					0,  // soff
+-					4,  // nbytes
+-					0,  // slast
+-					tx_count, // citer
+-					tx_count, // biter
+-					4, // doff
+-					0,  // dlastsga
+-                    0,   // major_int
+-					1	// disable_req
++					0, /* soff */
++					4, /* nbytes */
++					0, /* slast */
++					tx_count, /* citer */
++					tx_count, /* biter */
++					4, /* doff */
++					0, /* dlastsga */
++					0, /* major_int */
++					1  /* disable_req */
+ 					);
+ 
+ 
+-		start_edma_transfer(DSPI_DMA_TX_TCD); // transmit SPI data
+-		start_edma_transfer(DSPI_DMA_RX_TCD); // receive SPI data
++		start_edma_transfer(DSPI_DMA_TX_TCD); /* transmit SPI data */
++		start_edma_transfer(DSPI_DMA_RX_TCD); /* receive SPI data */
+ 	}
+ #endif
+ 
+@@ -583,9 +592,9 @@ static int write(struct driver_data *drv
+ 			  | QCR_CONT
+ 			  | (~((0x01 << drv_data->cs) << 8) & 0x0F00);
+ 
+-		if ( 	   (cmd_count == tx_count - 1)
+-			&& (drv_data->tx == drv_data->tx_end)
+-			&& (drv_data->cs_change) ) {
++		if ( (cmd_count == tx_count - 1)
++		     && (drv_data->tx == drv_data->tx_end)
++		     && (drv_data->cs_change) ) {
+ 			qcr &= ~QCR_CONT;
+ 		}
+ 		*drv_data->qcr = qcr;
+@@ -613,7 +622,6 @@ static int read(struct driver_data *drv_
+ 	rx_word = is_word_transfer(drv_data);
+ 
+ #if defined(SPI_DSPI)
+-
+ #if defined(SPI_DSPI_EDMA)
+ 	rx_edma = (u32*) drv_data->edma_tx_buf;
+ 	while ((drv_data->rx < drv_data->rx_end) && (rx_count < EDMA_BUFFER_SIZE)) {
+@@ -646,10 +654,7 @@ static int read(struct driver_data *drv_
+ 		}
+ 		rx_count++;
+ 	}
+-
+-
+ #else
+-
+ 	*drv_data->qar = QSPI_RECEIVE_RAM;
+ 	while ((drv_data->rx < drv_data->rx_end) && (rx_count < QSPI_RAM_SIZE)) {
+ 		if (rx_word) {
+@@ -680,19 +685,18 @@ static inline void qspi_setup_chip(struc
+ 
+ 	*drv_data->mcr = chip->mcr_val;
+ 
+-	// TODO: remove later
++	/* TBD: remove later */
++/* JKM -- validate */
+ 	chip->ctar_val = 0x78560118;
+ 
+ 	*drv_data->ctar = chip->ctar_val;
+ 	*drv_data->dspi_rser =  0
+-							| MCF_DSPI_DRSER_EOQFE
++				| MCF_DSPI_DRSER_EOQFE
+ #if defined(SPI_DSPI_EDMA)
+-							| MCF_DSPI_DRSER_TFFFE
+-							| MCF_DSPI_DRSER_TFFFS
++				| MCF_DSPI_DRSER_TFFFE
++				| MCF_DSPI_DRSER_TFFFS
+ #endif
+-							;
+-
+-
++				;
+ #else
+ 	*drv_data->qmr = chip->qmr_val;
+ 	*drv_data->qdlyr = chip->qdlyr_val;
+@@ -770,7 +774,6 @@ static irqreturn_t qspi_interrupt(int ir
+ 			 * transfer tasklet
+ 			 */
+ 			if (drv_data->flags & TRAN_STATE_WORD_ODD_NUM) {
+-				//*drv_data->qmr &= ~QMR_BITS;
+ 				set_16bit_transfer_mode(drv_data);
+ 			}
+ 
+@@ -857,10 +860,8 @@ static void pump_transfers(unsigned long
+ 	if (message->state == START_STATE) {
+ 		qspi_setup_chip(drv_data);
+ 
+-		if (drv_data->cs_control) {
+-			//printk( "m s\n" );
+-        		drv_data->cs_control(message->spi->chip_select, QSPI_CS_ASSERT);
+-		}
++		if (drv_data->cs_control)
++			drv_data->cs_control(message->spi->chip_select, QSPI_CS_ASSERT);
+ 	}
+ 
+ 	/* Delay if requested at end of transfer*/
+@@ -902,12 +903,12 @@ static void pump_transfers(unsigned long
+ }
+ 
+ 
+-static void pump_messages(struct work_struct * work)
++static void pump_messages(struct work_struct *work)
+ {
+ 	struct driver_data *drv_data;
+ 	unsigned long flags;
+ 
+-	drv_data = container_of(work,  struct driver_data, pump_messages);
++	drv_data = container_of(work, struct driver_data, pump_messages);
+ 
+ 	/* Lock queue and check for queue work */
+ 	spin_lock_irqsave(&drv_data->lock, flags);
+@@ -1002,7 +1003,7 @@ static int setup(struct spi_device *spi)
+ 	chip->mcr.cont_scke = 0;
+ 	chip->mcr.dconf = 0;
+ 	chip->mcr.frz = 0;
+-	chip->mcr.mtfe = 1;
++	chip->mcr.mtfe = 0;
+ 	chip->mcr.pcsse = 0;
+ 	chip->mcr.rooe = 0;
+ 	chip->mcr.pcsis = 0xFF;
+@@ -1019,7 +1020,7 @@ static int setup(struct spi_device *spi)
+ 	if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) {
+ 		chip->ctar.fmsz = spi->bits_per_word-1;
+ 	} else {
+-		printk(KERN_ERR "coldfire-qspi: invalid wordsize\n");
++		printk(KERN_ERR "coldfire-spi: invalid wordsize\n");
+ 		kfree(chip);
+ 		return -ENODEV;
+ 	}
+@@ -1056,9 +1057,9 @@ static int setup(struct spi_device *spi)
+ 
+ #else
+ 
+-	chip->qwr.csiv = 1;    // Chip selects are active low
+-	chip->qmr.master = 1;  // Must set to master mode
+-	chip->qmr.dohie = 1;   // Data output high impediance enabled
++	chip->qwr.csiv = 1;    /* Chip selects are active low */
++	chip->qmr.master = 1;  /* Must set to master mode */
++	chip->qmr.dohie = 1;   /* Data output high impediance enabled */
+ 	chip->void_write_data = chip_info->void_write_data;
+ 
+ 	chip->qdlyr.qcd = chip_info->del_cs_to_clk;
+@@ -1075,8 +1076,8 @@ static int setup(struct spi_device *spi)
+ 
+ 	chip->qmr.baud = baud_divisor;
+ 
+-	//printk( "QSPI: spi->max_speed_hz %d\n", spi->max_speed_hz );
+-	//printk( "QSPI: Baud set to %d\n", chip->qmr.baud );
++	/*printk( "SPI: spi->max_speed_hz %d\n", spi->max_speed_hz );*/
++	/*printk( "SPI: Baud set to %d\n", chip->qmr.baud );*/
+ 
+ 	if (spi->mode & SPI_CPHA)
+ 		chip->qmr.cpha = 1;
+@@ -1089,7 +1090,7 @@ static int setup(struct spi_device *spi)
+ 	} else if ((spi->bits_per_word >= 8) && (spi->bits_per_word <= 15)) {
+ 		chip->qmr.bits = spi->bits_per_word;
+ 	} else {
+-		printk(KERN_ERR "coldfire-qspi: invalid wordsize\n");
++		printk(KERN_ERR "coldfire-spi: invalid wordsize\n");
+ 		kfree(chip);
+ 		return -ENODEV;
+ 	}
+@@ -1112,7 +1113,7 @@ static int init_queue(struct driver_data
+ 	tasklet_init(&drv_data->pump_transfers,
+ 			pump_transfers,	(unsigned long)drv_data);
+ 
+-	INIT_WORK(&drv_data->pump_messages, pump_messages/*, drv_data*/);
++	INIT_WORK(&drv_data->pump_messages, pump_messages);
+ 
+ 	drv_data->workqueue = create_singlethread_workqueue(
+ 					drv_data->master->dev.parent->bus_id);
+@@ -1185,7 +1186,7 @@ static int destroy_queue(struct driver_d
+ }
+ 
+ 
+-static void cleanup(const struct spi_device *spi)
++static void cleanup(struct spi_device *spi)
+ {
+ 	struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
+ 
+@@ -1213,11 +1214,7 @@ static int coldfire_spi_probe(struct pla
+ 	int status = 0;
+ 	int i;
+ 
+-#if defined(SPI_DSPI_EDMA)
+-	init_edma();
+-#endif
+-
+- 	platform_info = (struct coldfire_spi_master *)pdev->dev.platform_data;
++	platform_info = (struct coldfire_spi_master *)pdev->dev.platform_data;
+ 
+   	master = spi_alloc_master(dev, sizeof(struct driver_data));
+   	if (!master)
+@@ -1241,7 +1238,7 @@ static int coldfire_spi_probe(struct pla
+  			drv_data->cs_control(i, QSPI_CS_INIT | QSPI_CS_DROP);
+ 
+ 	/* Setup register addresses */
+- 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi-module");
++ 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-module");
+  	if (!memory_resource) {
+  		dev_dbg(dev, "can not find platform module memory\n");
+  		goto out_error_master_alloc;
+@@ -1259,13 +1256,13 @@ static int coldfire_spi_probe(struct pla
+ 	 	dev_dbg(dev, "cannot allocate eDMA RX memory\n");
+ 	 	goto out_error_master_alloc;
+  	}
+-#endif 	
++#endif
+  	
+ #if defined(SPI_DSPI)
+ 
+-	drv_data->mcr 		= (void *)(memory_resource->start + 0x00000000);
+-	drv_data->ctar 		= (void *)(memory_resource->start + 0x0000000C);
+-	drv_data->dspi_sr 	= (void *)(memory_resource->start + 0x0000002C);
++	drv_data->mcr	    = (void *)(memory_resource->start + 0x00000000);
++	drv_data->ctar	    = (void *)(memory_resource->start + 0x0000000C);
++	drv_data->dspi_sr   = (void *)(memory_resource->start + 0x0000002C);
+ 	drv_data->dspi_rser = (void *)(memory_resource->start + 0x00000030);
+ 	drv_data->dspi_dtfr = (void *)(memory_resource->start + 0x00000034);
+ 	drv_data->dspi_drfr = (void *)(memory_resource->start + 0x00000038);
+@@ -1283,7 +1280,7 @@ static int coldfire_spi_probe(struct pla
+ #endif
+ 
+ 	/* Setup register addresses */
+- 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi-par");
++ 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-par");
+  	if (!memory_resource) {
+  		dev_dbg(dev, "can not find platform par memory\n");
+  		goto out_error_master_alloc;
+@@ -1292,7 +1289,7 @@ static int coldfire_spi_probe(struct pla
+  	drv_data->par = (void *)memory_resource->start;
+ 
+ 	/* Setup register addresses */
+- 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi-int-level");
++ 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-int-level");
+  	if (!memory_resource) {
+  		dev_dbg(dev, "can not find platform par memory\n");
+  		goto out_error_master_alloc;
+@@ -1301,7 +1298,7 @@ static int coldfire_spi_probe(struct pla
+  	drv_data->int_icr = (void *)memory_resource->start;
+ 
+ 	/* Setup register addresses */
+- 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi-int-mask");
++ 	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-int-mask");
+  	if (!memory_resource) {
+  		dev_dbg(dev, "can not find platform par memory\n");
+  		goto out_error_master_alloc;
+@@ -1309,32 +1306,52 @@ static int coldfire_spi_probe(struct pla
+ 
+  	drv_data->int_mr = (void *)memory_resource->start;
+ 
+-	irq = platform_info->irq_vector;
++	if (platform_info->irq_list) {
++		/* multiple IRQs */
++		int *irqlist = platform_info->irq_list;
++		while ((irq = *irqlist++)) {
++			int off = *irqlist++;
++			int lvl = *irqlist++;
++			int msk = *irqlist++;
++			status = request_irq(irq, qspi_interrupt, IRQF_DISABLED,
++					     dev->bus_id, drv_data);
++			if (status < 0) {
++				dev_err(&pdev->dev, 
++					"unable to attach ColdFire DSPI interrupt\n");
++				goto out_error_master_alloc;
++			}
++
++			if (lvl)
++				*(drv_data->int_icr + off) = lvl;
+ 
+-	status = request_irq(platform_info->irq_vector, qspi_interrupt, IRQF_DISABLED, dev->bus_id, drv_data);
+-	if (status < 0) {
+-		dev_err(&pdev->dev, "unable to attach ColdFire QSPI interrupt\n");
+-		goto out_error_master_alloc;
++			if (msk)
++				*drv_data->int_mr &= ~msk;
++		}
+ 	}
++	else {
++		irq = platform_info->irq_vector;
+ 
+-	/* Now that we have all the addresses etc.  Let's set it up */
+-	// TODO:
+-	//*drv_data->par = platform_info->par_val;
++		status = request_irq(platform_info->irq_vector, qspi_interrupt,
++				     IRQF_DISABLED, dev->bus_id, drv_data);
++		if (status < 0) {
++			dev_err(&pdev->dev, "unable to attach ColdFire QSPI interrupt\n");
++			goto out_error_master_alloc;
++		}
+ 
+-	MCF_GPIO_PAR_DSPI = 0
+-		| MCF_GPIO_PAR_DSPI_PCS5_PCS5
+-		| MCF_GPIO_PAR_DSPI_PCS2_PCS2
+-		| MCF_GPIO_PAR_DSPI_PCS1_PCS1
+-		| MCF_GPIO_PAR_DSPI_PCS0_PCS0
+-		| MCF_GPIO_PAR_DSPI_SIN_SIN
+-		| MCF_GPIO_PAR_DSPI_SOUT_SOUT
+-		| MCF_GPIO_PAR_DSPI_SCK_SCK;
++		*drv_data->int_icr = platform_info->irq_lp;
++		*drv_data->int_mr &= ~platform_info->irq_mask;
++	}
++
++	/* Now that we have all the addresses etc.  Let's set it up */
++	if (platform_info->par_val)
++		*drv_data->par = platform_info->par_val;
+ 
+-	*drv_data->int_icr = platform_info->irq_lp;
+-	*drv_data->int_mr &= ~platform_info->irq_mask;
++#ifdef CONFIG_M5227x
++	MCF_GPIO_PAR_IRQ = 0x04; /* Mistake in RM documentation */
++#endif
+ 
+ #ifdef SPI_DSPI
+-	drv_data->dspi_ctas = 0; // TODO: change later
++	drv_data->dspi_ctas = 0; /* TBD: change later */
+ #endif
+ 
+ 	/* Initial and start queue */
+@@ -1359,40 +1376,37 @@ static int coldfire_spi_probe(struct pla
+ 	}
+ 
+ #if defined(SPI_DSPI_EDMA)
+-	if (request_edma_channel(DSPI_DMA_TX_TCD,
+-							edma_tx_handler,
+-							NULL,
+-							pdev,
+-							NULL, /* spinlock */
+-							DRIVER_NAME
+-							)!=0)
+-	{
++	if (mcf_edma_request_channel(DSPI_DMA_TX_TCD,
++				     edma_tx_handler,
++				     NULL,
++				     pdev,
++				     NULL, /* spinlock */
++				     DRIVER_NAME
++				     )!=0) {
+ 		dev_err(&pdev->dev, "problem requesting edma transmit channel\n");
+ 		status = -EINVAL;
+-        goto out_error_queue_alloc;
++		goto out_error_queue_alloc;
+ 	}
+ 
+-	if (request_edma_channel(DSPI_DMA_RX_TCD,
+-							edma_rx_handler,
+-							NULL,
+-							pdev,
+-							NULL, /* spinlock */
+-							DRIVER_NAME
+-							)!=0)
+-	{
++	if (mcf_edma_request_channel(DSPI_DMA_RX_TCD,
++				     edma_rx_handler,
++				     NULL,
++				     pdev,
++				     NULL, /* spinlock */
++				     DRIVER_NAME
++				     )!=0) {
+ 		dev_err(&pdev->dev, "problem requesting edma receive channel\n");
+ 		status = -EINVAL;
+-        goto out_edma_transmit;
++		goto out_edma_transmit;
+ 	}
+ #endif
+ 
+-	printk( "SPI: Coldfire master initialized\n" );
+-	//dev_info(&pdev->dev, "driver initialized\n");
++	printk(KERN_INFO "SPI: Coldfire master initialized\n" );
+ 	return status;
+ 
+ #if defined(SPI_DSPI_EDMA)
+ out_edma_transmit:
+-	free_edma_channel(DSPI_DMA_TX_TCD, pdev);
++	mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev);
+ #endif
+ 
+ out_error_queue_alloc:
+@@ -1417,8 +1431,8 @@ static int coldfire_spi_remove(struct pl
+ 		return 0;
+ 
+ #if defined(SPI_DSPI_EDMA)
+-	free_edma_channel(DSPI_DMA_TX_TCD, pdev);
+-	free_edma_channel(DSPI_DMA_RX_TCD, pdev);
++	mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev);
++	mcf_edma_free_channel(DSPI_DMA_RX_TCD, pdev);
+ #endif	
+ 
+ 	/* Remove the queue */
+@@ -1426,27 +1440,8 @@ static int coldfire_spi_remove(struct pl
+ 	if (status != 0)
+ 		return status;
+ 
+-	/* Disable the SSP at the peripheral and SOC level */
+-	/*write_SSCR0(0, drv_data->ioaddr);
+-	pxa_set_cken(drv_data->master_info->clock_enable, 0);*/
+-
+-	/* Release DMA */
+-	/*if (drv_data->master_info->enable_dma) {
+-		if (drv_data->ioaddr == SSP1_VIRT) {
+-			DRCMRRXSSDR = 0;
+-			DRCMRTXSSDR = 0;
+-		} else if (drv_data->ioaddr == SSP2_VIRT) {
+-			DRCMRRXSS2DR = 0;
+-			DRCMRTXSS2DR = 0;
+-		} else if (drv_data->ioaddr == SSP3_VIRT) {
+-			DRCMRRXSS3DR = 0;
+-			DRCMRTXSS3DR = 0;
+-		}
+-		pxa_free_dma(drv_data->tx_channel);
+-		pxa_free_dma(drv_data->rx_channel);
+-	}*/
+-
+ 	/* Release IRQ */
++/* JKM -- check for list and remove list */
+ 	irq = platform_get_irq(pdev, 0);
+ 	if (irq >= 0)
+ 		free_irq(irq, drv_data);
+@@ -1496,8 +1491,6 @@ static int coldfire_spi_suspend(struct p
+ 	status = stop_queue(drv_data);
+ 	if (status != 0)
+ 		return status;
+-	/*write_SSCR0(0, drv_data->ioaddr);
+-	pxa_set_cken(drv_data->master_info->clock_enable, 0);*/
+ 
+ 	return 0;
+ }
+@@ -1507,9 +1500,6 @@ static int coldfire_spi_resume(struct pl
+ 	struct driver_data *drv_data = platform_get_drvdata(pdev);
+ 	int status = 0;
+ 
+-	/* Enable the SSP clock */
+-	/*pxa_set_cken(drv_data->master_info->clock_enable, 1);*/
+-
+ 	/* Start the queue running */
+ 	status = start_queue(drv_data);
+ 	if (status != 0) {
+--- /dev/null
++++ b/include/asm-m68k/m5485dspi.h
+@@ -0,0 +1,144 @@
++/*
++ * File:	mcf548x_dspi.h
++ * Purpose:	Register and bit definitions for the MCF548X
++ *
++ * Notes:
++ *
++ */
++
++#ifndef _M5485DSPI_H_
++#define _M5485DSPI_H_
++
++/*
++ *
++ * DMA Serial Peripheral Interface (DSPI)
++ *
++ */
++
++/* Register read/write macros */
++#define MCF_DSPI_DMCR         MCF_REG32(0x008A00)
++#define MCF_DSPI_DTCR         MCF_REG32(0x008A08)
++#define MCF_DSPI_DCTAR0       MCF_REG32(0x008A0C)
++#define MCF_DSPI_DCTAR1       MCF_REG32(0x008A10)
++#define MCF_DSPI_DCTAR2       MCF_REG32(0x008A14)
++#define MCF_DSPI_DCTAR3       MCF_REG32(0x008A18)
++#define MCF_DSPI_DCTAR4       MCF_REG32(0x008A1C)
++#define MCF_DSPI_DCTAR5       MCF_REG32(0x008A20)
++#define MCF_DSPI_DCTAR6       MCF_REG32(0x008A24)
++#define MCF_DSPI_DCTAR7       MCF_REG32(0x008A28)
++#define MCF_DSPI_DCTARn(x)    MCF_REG32(0x008A0C+(x*4))
++#define MCF_DSPI_DSR          MCF_REG32(0x008A2C)
++#define MCF_DSPI_DRSER        MCF_REG32(0x008A30)
++#define MCF_DSPI_DTFR         MCF_REG32(0x008A34)
++#define MCF_DSPI_DRFR         MCF_REG32(0x008A38)
++#define MCF_DSPI_DTFDR0       MCF_REG32(0x008A3C)
++#define MCF_DSPI_DTFDR1       MCF_REG32(0x008A40)
++#define MCF_DSPI_DTFDR2       MCF_REG32(0x008A44)
++#define MCF_DSPI_DTFDR3       MCF_REG32(0x008A48)
++#define MCF_DSPI_DTFDRn(x)    MCF_REG32(0x008A3C+(x*4))
++#define MCF_DSPI_DRFDR0       MCF_REG32(0x008A7C)
++#define MCF_DSPI_DRFDR1       MCF_REG32(0x008A80)
++#define MCF_DSPI_DRFDR2       MCF_REG32(0x008A84)
++#define MCF_DSPI_DRFDR3       MCF_REG32(0x008A88)
++#define MCF_DSPI_DRFDRn(x)    MCF_REG32(0x008A7C+(x*4))
++
++/* Bit definitions and macros for MCF_DSPI_DMCR */
++#define MCF_DSPI_DMCR_HALT             (0x00000001)
++#define MCF_DSPI_DMCR_SMPL_PT(x)       (((x)&0x00000003)<<8)
++#define MCF_DSPI_DMCR_CRXF             (0x00000400)
++#define MCF_DSPI_DMCR_CTXF             (0x00000800)
++#define MCF_DSPI_DMCR_DRXF             (0x00001000)
++#define MCF_DSPI_DMCR_DTXF             (0x00002000)
++#define MCF_DSPI_DMCR_CSIS0            (0x00010000)
++#define MCF_DSPI_DMCR_CSIS2            (0x00040000)
++#define MCF_DSPI_DMCR_CSIS3            (0x00080000)
++#define MCF_DSPI_DMCR_CSIS5            (0x00200000)
++#define MCF_DSPI_DMCR_ROOE             (0x01000000)
++#define MCF_DSPI_DMCR_PCSSE            (0x02000000)
++#define MCF_DSPI_DMCR_MTFE             (0x04000000)
++#define MCF_DSPI_DMCR_FRZ              (0x08000000)
++#define MCF_DSPI_DMCR_DCONF(x)         (((x)&0x00000003)<<28)
++#define MCF_DSPI_DMCR_CSCK             (0x40000000)
++#define MCF_DSPI_DMCR_MSTR             (0x80000000)
++
++/* Bit definitions and macros for MCF_DSPI_DTCR */
++#define MCF_DSPI_DTCR_SPI_TCNT(x)      (((x)&0x0000FFFF)<<16)
++
++/* Bit definitions and macros for MCF_DSPI_DCTARn */
++#define MCF_DSPI_DCTAR_BR(x)          (((x)&0x0000000F)<<0)
++#define MCF_DSPI_DCTAR_DT(x)          (((x)&0x0000000F)<<4)
++#define MCF_DSPI_DCTAR_ASC(x)         (((x)&0x0000000F)<<8)
++#define MCF_DSPI_DCTAR_CSSCK(x)       (((x)&0x0000000F)<<12)
++#define MCF_DSPI_DCTAR_PBR(x)         (((x)&0x00000003)<<16)
++#define MCF_DSPI_DCTAR_PDT(x)         (((x)&0x00000003)<<18)
++#define MCF_DSPI_DCTAR_PASC(x)        (((x)&0x00000003)<<20)
++#define MCF_DSPI_DCTAR_PCSSCK(x)      (((x)&0x00000003)<<22)
++#define MCF_DSPI_DCTAR_LSBFE          (0x01000000)
++#define MCF_DSPI_DCTAR_CPHA           (0x02000000)
++#define MCF_DSPI_DCTAR_CPOL           (0x04000000)
++/* #define MCF_DSPI_DCTAR_TRSZ(x)        (((x)&0x0000000F)<<27) */
++#define MCF_DSPI_DCTAR_FMSZ(x)        (((x)&0x0000000F)<<27)
++#define MCF_DSPI_DCTAR_PCSSCK_1CLK    (0x00000000)
++#define MCF_DSPI_DCTAR_PCSSCK_3CLK    (0x00400000)
++#define MCF_DSPI_DCTAR_PCSSCK_5CLK    (0x00800000)
++#define MCF_DSPI_DCTAR_PCSSCK_7CLK    (0x00A00000)
++#define MCF_DSPI_DCTAR_PASC_1CLK      (0x00000000)
++#define MCF_DSPI_DCTAR_PASC_3CLK      (0x00100000)
++#define MCF_DSPI_DCTAR_PASC_5CLK      (0x00200000)
++#define MCF_DSPI_DCTAR_PASC_7CLK      (0x00300000)
++#define MCF_DSPI_DCTAR_PDT_1CLK       (0x00000000)
++#define MCF_DSPI_DCTAR_PDT_3CLK       (0x00040000)
++#define MCF_DSPI_DCTAR_PDT_5CLK       (0x00080000)
++#define MCF_DSPI_DCTAR_PDT_7CLK       (0x000A0000)
++#define MCF_DSPI_DCTAR_PBR_1CLK       (0x00000000)
++#define MCF_DSPI_DCTAR_PBR_3CLK       (0x00010000)
++#define MCF_DSPI_DCTAR_PBR_5CLK       (0x00020000)
++#define MCF_DSPI_DCTAR_PBR_7CLK       (0x00030000)
++
++/* Bit definitions and macros for MCF_DSPI_DSR */
++#define MCF_DSPI_DSR_RXPTR(x)          (((x)&0x0000000F)<<0)
++#define MCF_DSPI_DSR_RXCTR(x)          (((x)&0x0000000F)<<4)
++#define MCF_DSPI_DSR_TXPTR(x)          (((x)&0x0000000F)<<8)
++#define MCF_DSPI_DSR_TXCTR(x)          (((x)&0x0000000F)<<12)
++#define MCF_DSPI_DSR_RFDF              (0x00020000)
++#define MCF_DSPI_DSR_RFOF              (0x00080000)
++#define MCF_DSPI_DSR_TFFF              (0x02000000)
++#define MCF_DSPI_DSR_TFUF              (0x08000000)
++#define MCF_DSPI_DSR_EOQF              (0x10000000)
++#define MCF_DSPI_DSR_TXRXS             (0x40000000)
++#define MCF_DSPI_DSR_TCF               (0x80000000)
++
++/* Bit definitions and macros for MCF_DSPI_DRSER */
++#define MCF_DSPI_DRSER_RFDFS           (0x00010000)
++#define MCF_DSPI_DRSER_RFDFE           (0x00020000)
++#define MCF_DSPI_DRSER_RFOFE           (0x00080000)
++#define MCF_DSPI_DRSER_TFFFS           (0x01000000)
++#define MCF_DSPI_DRSER_TFFFE           (0x02000000)
++#define MCF_DSPI_DRSER_TFUFE           (0x08000000)
++#define MCF_DSPI_DRSER_EOQFE           (0x10000000)
++#define MCF_DSPI_DRSER_TCFE            (0x80000000)
++
++/* Bit definitions and macros for MCF_DSPI_DTFR */
++#define MCF_DSPI_DTFR_TXDATA(x)        (((x)&0x0000FFFF)<<0)
++#define MCF_DSPI_DTFR_CS0              (0x00010000)
++#define MCF_DSPI_DTFR_CS2              (0x00040000)
++#define MCF_DSPI_DTFR_CS3              (0x00080000)
++#define MCF_DSPI_DTFR_CS5              (0x00200000)
++#define MCF_DSPI_DTFR_CTCNT            (0x04000000)
++#define MCF_DSPI_DTFR_EOQ              (0x08000000)
++#define MCF_DSPI_DTFR_CTAS(x)          (((x)&0x00000007)<<28)
++#define MCF_DSPI_DTFR_CONT             (0x80000000)
++
++/* Bit definitions and macros for MCF_DSPI_DRFR */
++#define MCF_DSPI_DRFR_RXDATA(x)        (((x)&0x0000FFFF)<<0)
++
++/* Bit definitions and macros for MCF_DSPI_DTFDRn */
++#define MCF_DSPI_DTFDRn_TXDATA(x)      (((x)&0x0000FFFF)<<0)
++#define MCF_DSPI_DTFDRn_TXCMD(x)       (((x)&0x0000FFFF)<<16)
++
++/* Bit definitions and macros for MCF_DSPI_DRFDRn */
++#define MCF_DSPI_DRFDRn_RXDATA(x)      (((x)&0x0000FFFF)<<0)
++
++/********************************************************************/
++
++#endif /* _M5485DSPI_H_ */
+--- a/include/asm-m68k/mcfqspi.h
++++ b/include/asm-m68k/mcfqspi.h
+@@ -36,6 +36,7 @@ struct coldfire_spi_master {
+ 	u32 irq_mask;
+ 	u8  irq_lp;
+ 	u8  par_val;
++	u32 *irq_list;
+ 	void (*cs_control)(u8 cs, u8 command);
+ };
+ 
+--- a/include/asm-m68k/mcfsim.h
++++ b/include/asm-m68k/mcfsim.h
+@@ -25,6 +25,7 @@
+ #include <asm/mcf5445x_dtim.h>
+ #elif defined(CONFIG_M547X_8X)
+ #include <asm/m5485sim.h>
++#include <asm/m5485gpio.h>
+ #endif
+ 
+ /*
diff --git a/target/linux/coldfire/patches/053-mcfv4e_brcache_inval.patch b/target/linux/coldfire/patches/053-mcfv4e_brcache_inval.patch
new file mode 100644
index 0000000000..dc551babf3
--- /dev/null
+++ b/target/linux/coldfire/patches/053-mcfv4e_brcache_inval.patch
@@ -0,0 +1,42 @@
+From eba69831e8f35174e2e15e373a66f40dc0be8929 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 14 May 2008 12:23:12 -0600
+Subject: [PATCH] Force branch-cache invalidate on task switch.
+
+When finishing a task switch make sure the branch cache
+gets invalidated to ensure no stale entries exist for
+the next user space.
+
+LTIBName: mcfv4e-brcache-inval
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ include/asm-m68k/system.h |   15 +++++++++++++++
+ 1 files changed, 15 insertions(+), 0 deletions(-)
+
+--- a/include/asm-m68k/system.h
++++ b/include/asm-m68k/system.h
+@@ -5,9 +5,24 @@
+ #include <linux/kernel.h>
+ #include <asm/segment.h>
+ #include <asm/entry.h>
++#include <asm/cfcache.h>
+ 
+ #ifdef __KERNEL__
+ 
++#ifdef CONFIG_COLDFIRE
++#define FLUSH_BC        (0x00040000)
++
++#define finish_arch_switch(prev) do {		\
++	unsigned long tmpreg;			\
++	asm volatile ( "move.l %2,%0\n"		\
++		       "orl %1,%0\n"		\
++		       "movec %0,%%cacr"	\
++		       : "=&d" (tmpreg)		\
++		       : "id" (FLUSH_BC), "m" (shadow_cacr));	\
++	} while(0)
++
++#endif
++
+ /*
+  * switch_to(n) should switch tasks to task ptr, first checking that
+  * ptr isn't the current task, in which case it does nothing.  This
diff --git a/target/linux/coldfire/patches/054-mcfv4e_defconfig_upd.patch b/target/linux/coldfire/patches/054-mcfv4e_defconfig_upd.patch
new file mode 100644
index 0000000000..3742421224
--- /dev/null
+++ b/target/linux/coldfire/patches/054-mcfv4e_defconfig_upd.patch
@@ -0,0 +1,2227 @@
+From 8a089acdd2f29356883bcbd65622fda8b0a7f276 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 15 May 2008 11:51:00 -0600
+Subject: [PATCH] Defconfig updates for M54455EVB, M5475EVB and M5485EVB.
+
+LTIBName: mcfv4e-defconfig-upd
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/configs/55_defconfig        |  830 ++++++++++++++++++++++++++++
+ arch/m68k/configs/m54455evb_defconfig |    2 +-
+ arch/m68k/configs/m5475evb_defconfig  |  954 +++++++++++++++++++++++++++++++++
+ arch/m68k/configs/m5485evb_defconfig  |  197 ++++----
+ 4 files changed, 1889 insertions(+), 94 deletions(-)
+ create mode 100644 arch/m68k/configs/55_defconfig
+ create mode 100644 arch/m68k/configs/m5475evb_defconfig
+
+--- /dev/null
++++ b/arch/m68k/configs/55_defconfig
+@@ -0,0 +1,830 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25
++# Thu Jun 26 16:17:41 2008
++#
++CONFIG_M68K=y
++CONFIG_MMU=y
++# CONFIG_GENERIC_TIME is not set
++# CONFIG_GENERIC_CLOCKEVENTS is not set
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_TIME_LOW_RES=y
++CONFIG_GENERIC_IOMAP=y
++# CONFIG_NO_IOPORT is not set
++# CONFIG_NO_DMA is not set
++CONFIG_ARCH_SUPPORTS_AOUT=y
++CONFIG_HZ=100
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=17
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++CONFIG_NAMESPACES=y
++# CONFIG_UTS_NS is not set
++# CONFIG_IPC_NS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_BLK_DEV_INITRD is not set
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++# CONFIG_HAVE_OPROFILE is not set
++# CONFIG_HAVE_KPROBES is not set
++# CONFIG_HAVE_KRETPROBES is not set
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform dependent setup
++#
++# CONFIG_SUN3 is not set
++CONFIG_COLDFIRE=y
++CONFIG_CFV4E=y
++# CONFIG_AMIGA is not set
++# CONFIG_ATARI is not set
++# CONFIG_PCI is not set
++# CONFIG_MAC is not set
++# CONFIG_APOLLO is not set
++# CONFIG_VME is not set
++# CONFIG_HP300 is not set
++# CONFIG_SUN3X is not set
++# CONFIG_Q40 is not set
++
++#
++# Processor type
++#
++# CONFIG_M68020 is not set
++# CONFIG_M68030 is not set
++# CONFIG_M68040 is not set
++# CONFIG_M68060 is not set
++CONFIG_M5445X=y
++# CONFIG_M54451 is not set
++CONFIG_M54455=y
++# CONFIG_M54451EVB is not set
++CONFIG_M54455EVB=y
++# CONFIG_M547X_8X is not set
++CONFIG_MCFCLK=266666666
++# CONFIG_MCF_USER_HALT is not set
++CONFIG_MMU_CFV4E=y
++CONFIG_SDRAM_BASE=0x40000000
++CONFIG_SDRAM_SIZE=0x10000000
++CONFIG_NOR_FLASH_BASE=0x00000000
++# CONFIG_M68KFPU_EMU is not set
++CONFIG_ADVANCED=y
++# CONFIG_RMW_INSNS is not set
++CONFIG_SINGLE_MEMORY_CHUNK=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_NEED_MULTIPLE_NODES=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++
++#
++# General setup
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++CONFIG_PROC_HARDWARE=y
++CONFIG_ZONE_DMA=y
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++
++#
++# Power management options
++#
++# CONFIG_PM is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_NET_KEY=y
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_MULTIPLE_TABLES is not set
++# CONFIG_IP_ROUTE_MULTIPATH is not set
++# CONFIG_IP_ROUTE_VERBOSE is not set
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++CONFIG_INET_AH=y
++CONFIG_INET_ESP=y
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_STANDALONE is not set
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=64000
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_COLDFIRE_SEC is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++CONFIG_FEC=y
++# CONFIG_FEC2 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_COLDFIRE=y
++# CONFIG_SERIAL_MCF is not set
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_MCF548x is not set
++CONFIG_I2C_MCF=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_COLDFIRE_EDMA is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++# CONFIG_HID_SUPPORT is not set
++# CONFIG_USB_SUPPORT is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# Character devices
++#
++# CONFIG_SERIAL_CONSOLE is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++# CONFIG_INOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++CONFIG_NTFS_FS=y
++# CONFIG_NTFS_DEBUG is not set
++CONFIG_NTFS_RW=y
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++# CONFIG_PROC_KCORE is not set
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++CONFIG_MINIX_FS=y
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=y
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++# CONFIG_ENABLE_MUST_CHECK is not set
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++CONFIG_DEBUG_SLAB=y
++# CONFIG_DEBUG_SLAB_LEAK is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_FRAME_POINTER is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++CONFIG_BOOTPARAM=y
++CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe ip=172.27.155.55:172.27.155.1:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)"
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_AEAD=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_HMAC=y
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=y
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++CONFIG_CRYPTO_TEST=m
++CONFIG_CRYPTO_AUTHENC=y
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_MCFCAU is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=y
++CONFIG_CRC16=y
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++CONFIG_LIBCRC32C=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+--- a/arch/m68k/configs/m54455evb_defconfig
++++ b/arch/m68k/configs/m54455evb_defconfig
+@@ -963,7 +963,7 @@ CONFIG_FORCED_INLINING=y
+ # CONFIG_RCU_TORTURE_TEST is not set
+ # CONFIG_FAULT_INJECTION is not set
+ CONFIG_BOOTPARAM=y
+-CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.163.2:/tftpboot/ltib ip=172.27.163.3:172.27.163.2:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)"
++CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe ip=172.27.155.55:172.27.155.1:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)"
+ 
+ #
+ # CodeTEST Setup
+--- /dev/null
++++ b/arch/m68k/configs/m5475evb_defconfig
+@@ -0,0 +1,954 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25
++# Wed Jul  9 16:09:19 2008
++#
++CONFIG_M68K=y
++CONFIG_MMU=y
++# CONFIG_GENERIC_TIME is not set
++# CONFIG_GENERIC_CLOCKEVENTS is not set
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_TIME_LOW_RES=y
++CONFIG_GENERIC_IOMAP=y
++# CONFIG_NO_IOPORT is not set
++# CONFIG_NO_DMA is not set
++CONFIG_ARCH_SUPPORTS_AOUT=y
++CONFIG_HZ=100
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=17
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++CONFIG_NAMESPACES=y
++# CONFIG_UTS_NS is not set
++# CONFIG_IPC_NS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_BLK_DEV_INITRD is not set
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++# CONFIG_HAVE_OPROFILE is not set
++# CONFIG_HAVE_KPROBES is not set
++# CONFIG_HAVE_KRETPROBES is not set
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform dependent setup
++#
++# CONFIG_SUN3 is not set
++CONFIG_COLDFIRE=y
++CONFIG_CFV4E=y
++CONFIG_MCD_DMA=y
++# CONFIG_AMIGA is not set
++# CONFIG_ATARI is not set
++CONFIG_PCI=y
++# CONFIG_MAC is not set
++# CONFIG_APOLLO is not set
++# CONFIG_VME is not set
++# CONFIG_HP300 is not set
++# CONFIG_SUN3X is not set
++# CONFIG_Q40 is not set
++
++#
++# Processor type
++#
++# CONFIG_M68020 is not set
++# CONFIG_M68030 is not set
++# CONFIG_M68040 is not set
++# CONFIG_M68060 is not set
++# CONFIG_M5445X is not set
++CONFIG_M547X_8X=y
++CONFIG_M547X=y
++# CONFIG_M548X is not set
++# CONFIG_M5475AFE is not set
++# CONFIG_M5475BFE is not set
++CONFIG_M5475CFE=y
++# CONFIG_M5475DFE is not set
++# CONFIG_M5475EFE is not set
++# CONFIG_M5475FFE is not set
++# CONFIG_M5485AFE is not set
++# CONFIG_M5485BFE is not set
++# CONFIG_M5485CFE is not set
++# CONFIG_M5485DFE is not set
++# CONFIG_M5485EFE is not set
++# CONFIG_M5485FFE is not set
++CONFIG_MCFCLK=266000000
++# CONFIG_MCF_USER_HALT is not set
++CONFIG_MMU_CFV4E=y
++CONFIG_SDRAM_BASE=0x00000000
++CONFIG_SDRAM_SIZE=0x04000000
++CONFIG_NOR_FLASH_BASE=0xE0000000
++# CONFIG_M68KFPU_EMU is not set
++CONFIG_ADVANCED=y
++# CONFIG_RMW_INSNS is not set
++CONFIG_SINGLE_MEMORY_CHUNK=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_NEED_MULTIPLE_NODES=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++
++#
++# General setup
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++CONFIG_PROC_HARDWARE=y
++CONFIG_ZONE_DMA=y
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++
++#
++# Power management options
++#
++# CONFIG_PM is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_NET_KEY=y
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_MULTIPLE_TABLES is not set
++# CONFIG_IP_ROUTE_MULTIPATH is not set
++# CONFIG_IP_ROUTE_VERBOSE is not set
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++CONFIG_INET_AH=y
++CONFIG_INET_ESP=y
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++CONFIG_CAN=y
++CONFIG_CAN_RAW=y
++# CONFIG_CAN_BCM is not set
++
++#
++# CAN Device Drivers
++#
++# CONFIG_CAN_VCAN is not set
++CONFIG_CAN_FLEXCAN=y
++CONFIG_CAN_MCF547X_8X=y
++# CONFIG_CAN_DEBUG_DEVICES is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_STANDALONE is not set
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++# CONFIG_MTD_CHAR is not set
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=y
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=64000
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++CONFIG_COLDFIRE_SEC=y
++CONFIG_SEC_DEVICE=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++CONFIG_FEC_548x=y
++CONFIG_FEC_548x_AUTO_NEGOTIATION=y
++# CONFIG_FEC_548x_ENABLE_FEC2 is not set
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_ENC28J60 is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NET_FC is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++# CONFIG_SERIO_PCIPS2 is not set
++# CONFIG_SERIO_RAW is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_COLDFIRE=y
++CONFIG_SERIAL_COLDFIRE_IRDA=y
++# CONFIG_SERIAL_MCF is not set
++# CONFIG_SERIAL_JSM is not set
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++CONFIG_SPI_DEBUG=y
++# CONFIG_COLDFIRE_EDMA is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_BITBANG is not set
++CONFIG_SPI_COLDFIRE=y
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_SPI_COLDFIRE_SSI_AUDIO is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_COLDFIRE_WATCHDOG=m
++
++#
++# PCI-based Watchdog Cards
++#
++# CONFIG_PCIPCWATCHDOG is not set
++# CONFIG_WDTPCI is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++CONFIG_HID_DEBUG=y
++# CONFIG_HIDRAW is not set
++# CONFIG_USB_SUPPORT is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# Character devices
++#
++# CONFIG_SERIAL_CONSOLE is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++# CONFIG_INOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++CONFIG_NTFS_FS=y
++# CONFIG_NTFS_DEBUG is not set
++CONFIG_NTFS_RW=y
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++# CONFIG_PROC_KCORE is not set
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++CONFIG_MINIX_FS=y
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++CONFIG_ROMFS_FS=y
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=y
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++# CONFIG_ENABLE_MUST_CHECK is not set
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++CONFIG_DEBUG_SLAB=y
++# CONFIG_DEBUG_SLAB_LEAK is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_FRAME_POINTER is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++CONFIG_BOOTPARAM=y
++CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.163.2:/tftpboot/ltib ip=172.27.163.3:172.27.163.2:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)"
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_AEAD=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_HMAC=y
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=y
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++CONFIG_CRYPTO_TEST=m
++CONFIG_CRYPTO_AUTHENC=y
++# CONFIG_CRYPTO_LZO is not set
++# CONFIG_CRYPTO_HW is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=y
++CONFIG_CRC16=y
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++CONFIG_LIBCRC32C=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+--- a/arch/m68k/configs/m5485evb_defconfig
++++ b/arch/m68k/configs/m5485evb_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.24
+-# Wed Mar  5 16:05:25 2008
++# Linux kernel version: 2.6.25
++# Thu Jul 10 16:12:53 2008
+ #
+ CONFIG_M68K=y
+ CONFIG_MMU=y
+@@ -16,6 +16,8 @@ CONFIG_TIME_LOW_RES=y
+ CONFIG_GENERIC_IOMAP=y
+ # CONFIG_NO_IOPORT is not set
+ # CONFIG_NO_DMA is not set
++CONFIG_ARCH_SUPPORTS_AOUT=y
++CONFIG_HZ=100
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+ 
+ #
+@@ -32,18 +34,24 @@ CONFIG_SYSVIPC_SYSCTL=y
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+-# CONFIG_USER_NS is not set
+-# CONFIG_PID_NS is not set
+ # CONFIG_AUDIT is not set
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=17
+ # CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
+ CONFIG_FAIR_GROUP_SCHED=y
+-CONFIG_FAIR_USER_SCHED=y
+-# CONFIG_FAIR_CGROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
++CONFIG_NAMESPACES=y
++# CONFIG_UTS_NS is not set
++# CONFIG_IPC_NS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
+ # CONFIG_BLK_DEV_INITRD is not set
+ # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+ CONFIG_SYSCTL=y
+@@ -57,17 +65,25 @@ CONFIG_HOTPLUG=y
+ CONFIG_PRINTK=y
+ CONFIG_BUG=y
+ CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
+ CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+ CONFIG_SLAB=y
+ # CONFIG_SLUB is not set
+ # CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++# CONFIG_HAVE_OPROFILE is not set
++# CONFIG_HAVE_KPROBES is not set
++# CONFIG_HAVE_KRETPROBES is not set
++CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+@@ -96,6 +112,7 @@ CONFIG_IOSCHED_CFQ=y
+ CONFIG_DEFAULT_CFQ=y
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
+ 
+ #
+ # Platform dependent setup
+@@ -120,7 +137,7 @@ CONFIG_MCD_DMA=y
+ # CONFIG_M68030 is not set
+ # CONFIG_M68040 is not set
+ # CONFIG_M68060 is not set
+-# CONFIG_M54455 is not set
++# CONFIG_M5445X is not set
+ CONFIG_M547X_8X=y
+ # CONFIG_M547X is not set
+ CONFIG_M548X=y
+@@ -141,6 +158,7 @@ CONFIG_MCFCLK=200000000
+ CONFIG_MMU_CFV4E=y
+ CONFIG_SDRAM_BASE=0x00000000
+ CONFIG_SDRAM_SIZE=0x04000000
++CONFIG_NOR_FLASH_BASE=0xE0000000
+ # CONFIG_M68KFPU_EMU is not set
+ CONFIG_ADVANCED=y
+ # CONFIG_RMW_INSNS is not set
+@@ -191,6 +209,7 @@ CONFIG_XFRM=y
+ # CONFIG_XFRM_USER is not set
+ # CONFIG_XFRM_SUB_POLICY is not set
+ # CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
+ CONFIG_NET_KEY=y
+ # CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+@@ -251,6 +270,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ #
+ # CONFIG_NET_PKTGEN is not set
+ # CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+ # CONFIG_AF_RXRPC is not set
+@@ -280,73 +300,7 @@ CONFIG_FW_LOADER=y
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+ # CONFIG_CONNECTOR is not set
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-
+-#
+-# User Modules And Translation Layers
+-#
+-# CONFIG_MTD_CHAR is not set
+-CONFIG_MTD_BLKDEVS=y
+-CONFIG_MTD_BLOCK=y
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-# CONFIG_MTD_CFI is not set
+-# CONFIG_MTD_JEDECPROBE is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-CONFIG_MTD_RAM=y
+-CONFIG_MTD_ROM=y
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
++# CONFIG_MTD is not set
+ # CONFIG_PARPORT is not set
+ CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+@@ -356,11 +310,15 @@ CONFIG_BLK_DEV_LOOP=y
+ CONFIG_BLK_DEV_RAM=y
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=64000
+-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_BLK_DEV_XIP is not set
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+ CONFIG_MISC_DEVICES=y
++CONFIG_COLDFIRE_SEC=y
++CONFIG_SEC_DEVICE=y
+ # CONFIG_EEPROM_93CX6 is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
+ # CONFIG_IDE is not set
+ 
+ #
+@@ -417,6 +375,7 @@ CONFIG_MII=y
+ CONFIG_FEC_548x=y
+ CONFIG_FEC_548x_AUTO_NEGOTIATION=y
+ # CONFIG_FEC_548x_ENABLE_FEC2 is not set
++# CONFIG_ENC28J60 is not set
+ # CONFIG_IBM_NEW_EMAC_ZMII is not set
+ # CONFIG_IBM_NEW_EMAC_RGMII is not set
+ # CONFIG_IBM_NEW_EMAC_TAH is not set
+@@ -433,7 +392,6 @@ CONFIG_FEC_548x_AUTO_NEGOTIATION=y
+ # CONFIG_WAN is not set
+ # CONFIG_PPP is not set
+ # CONFIG_SLIP is not set
+-# CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+@@ -500,6 +458,8 @@ CONFIG_HW_CONSOLE=y
+ # Non-8250 serial port support
+ #
+ CONFIG_SERIAL_COLDFIRE=y
++# CONFIG_SERIAL_COLDFIRE_IRDA is not set
++# CONFIG_SERIAL_MCF is not set
+ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
+ # CONFIG_IPMI_HANDLER is not set
+@@ -508,17 +468,69 @@ CONFIG_UNIX98_PTYS=y
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
+ # CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++# CONFIG_I2C_CHARDEV is not set
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_MCF548x=y
++# CONFIG_I2C_MCF is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+ 
+ #
+ # SPI support
+ #
+-# CONFIG_SPI is not set
++CONFIG_SPI=y
++CONFIG_SPI_DEBUG=y
+ # CONFIG_COLDFIRE_EDMA is not set
+-# CONFIG_SPI_MASTER is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_BITBANG is not set
++CONFIG_SPI_COLDFIRE=y
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_SPI_COLDFIRE_SSI_AUDIO is not set
+ # CONFIG_W1 is not set
+ # CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
+ # CONFIG_WATCHDOG is not set
+ 
+ #
+@@ -567,6 +579,7 @@ CONFIG_HID_DEBUG=y
+ # CONFIG_HIDRAW is not set
+ # CONFIG_USB_SUPPORT is not set
+ # CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
+ # CONFIG_NEW_LEDS is not set
+ # CONFIG_RTC_CLASS is not set
+ 
+@@ -599,11 +612,9 @@ CONFIG_FS_MBCACHE=y
+ # CONFIG_XFS_FS is not set
+ # CONFIG_GFS2_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-CONFIG_MINIX_FS=y
+-CONFIG_ROMFS_FS=y
++CONFIG_DNOTIFY=y
+ # CONFIG_INOTIFY is not set
+ # CONFIG_QUOTA is not set
+-CONFIG_DNOTIFY=y
+ # CONFIG_AUTOFS_FS is not set
+ # CONFIG_AUTOFS4_FS is not set
+ # CONFIG_FUSE_FS is not set
+@@ -648,11 +659,12 @@ CONFIG_TMPFS=y
+ # CONFIG_BEFS_FS is not set
+ # CONFIG_BFS_FS is not set
+ # CONFIG_EFS_FS is not set
+-# CONFIG_JFFS2_FS is not set
+ # CONFIG_CRAMFS is not set
+ # CONFIG_VXFS_FS is not set
++CONFIG_MINIX_FS=y
+ # CONFIG_HPFS_FS is not set
+ # CONFIG_QNX4FS_FS is not set
++CONFIG_ROMFS_FS=y
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+ CONFIG_NETWORK_FILESYSTEMS=y
+@@ -736,9 +748,6 @@ CONFIG_NLS_ISO8859_1=y
+ # CONFIG_NLS_KOI8_U is not set
+ CONFIG_NLS_UTF8=y
+ # CONFIG_DLM is not set
+-CONFIG_INSTRUMENTATION=y
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+ 
+ #
+ # Kernel hacking
+@@ -770,20 +779,15 @@ CONFIG_DEBUG_INFO=y
+ # CONFIG_DEBUG_LIST is not set
+ # CONFIG_DEBUG_SG is not set
+ # CONFIG_FRAME_POINTER is not set
+-CONFIG_FORCED_INLINING=y
+ # CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
+ # CONFIG_FAULT_INJECTION is not set
+ # CONFIG_SAMPLES is not set
+ CONFIG_BOOTPARAM=y
+ CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.163.2:/tftpboot/ltib ip=172.27.163.3:172.27.163.2:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)"
+ 
+ #
+-# CodeTEST Setup
+-#
+-# CONFIG_CODETEST is not set
+-
+-#
+ # Security options
+ #
+ # CONFIG_KEYS is not set
+@@ -791,7 +795,9 @@ CONFIG_BOOTPARAM_STRING="root=/dev/nfs r
+ # CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ CONFIG_CRYPTO=y
+ CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_AEAD=y
+ CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
+ CONFIG_CRYPTO_HASH=y
+ CONFIG_CRYPTO_MANAGER=y
+ CONFIG_CRYPTO_HMAC=y
+@@ -810,6 +816,9 @@ CONFIG_CRYPTO_CBC=y
+ # CONFIG_CRYPTO_PCBC is not set
+ # CONFIG_CRYPTO_LRW is not set
+ # CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
+ # CONFIG_CRYPTO_CRYPTD is not set
+ CONFIG_CRYPTO_DES=y
+ # CONFIG_CRYPTO_FCRYPT is not set
+@@ -824,12 +833,14 @@ CONFIG_CRYPTO_DES=y
+ # CONFIG_CRYPTO_KHAZAD is not set
+ # CONFIG_CRYPTO_ANUBIS is not set
+ # CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
+ # CONFIG_CRYPTO_DEFLATE is not set
+ # CONFIG_CRYPTO_MICHAEL_MIC is not set
+ # CONFIG_CRYPTO_CRC32C is not set
+ # CONFIG_CRYPTO_CAMELLIA is not set
+ CONFIG_CRYPTO_TEST=m
+-# CONFIG_CRYPTO_AUTHENC is not set
++CONFIG_CRYPTO_AUTHENC=y
++# CONFIG_CRYPTO_LZO is not set
+ # CONFIG_CRYPTO_HW is not set
+ 
+ #
diff --git a/target/linux/coldfire/patches/055-m547x_8x_i2c.patch b/target/linux/coldfire/patches/055-m547x_8x_i2c.patch
new file mode 100644
index 0000000000..0a2a277d34
--- /dev/null
+++ b/target/linux/coldfire/patches/055-m547x_8x_i2c.patch
@@ -0,0 +1,808 @@
+From ce57fc22543d0ee0ca33157264815a52fc8cf9a3 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 15 May 2008 13:23:27 -0600
+Subject: [PATCH] Add I2C bus driver for MCF547x and MCF548x.
+
+LTIBName: m547x-8x-i2c
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+Signed-off-by: Shrek Wu <b16972@freescale.com>
+---
+ arch/m68k/coldfire/Makefile          |    1 +
+ arch/m68k/coldfire/mcf548x-devices.c |   94 ++++++
+ drivers/i2c/busses/Kconfig           |   12 +
+ drivers/i2c/busses/Makefile          |    1 +
+ drivers/i2c/busses/i2c-algo-mcf.h    |   23 ++
+ drivers/i2c/busses/i2c-mcf548x.c     |  573 ++++++++++++++++++++++++++++++++++
+ include/asm-m68k/m5485i2c.h          |   45 +++
+ 7 files changed, 749 insertions(+), 0 deletions(-)
+ create mode 100644 arch/m68k/coldfire/mcf548x-devices.c
+ create mode 100644 drivers/i2c/busses/i2c-algo-mcf.h
+ create mode 100644 drivers/i2c/busses/i2c-mcf548x.c
+ create mode 100644 include/asm-m68k/m5485i2c.h
+
+--- a/arch/m68k/coldfire/Makefile
++++ b/arch/m68k/coldfire/Makefile
+@@ -11,4 +11,5 @@ endif
+ obj-$(CONFIG_PCI)	+= pci.o mcf5445x-pci.o iomap.o
+ obj-$(CONFIG_M54455)	+= mcf5445x-devices.o
+ obj-$(CONFIG_M547X_8X)	+= m547x_8x-devices.o
++obj-$(CONFIG_M547X_8X)	+= mcf548x-devices.o
+ obj-$(CONFIG_MCD_DMA)	+= m547x_8x-dma.o
+--- /dev/null
++++ b/arch/m68k/coldfire/mcf548x-devices.c
+@@ -0,0 +1,94 @@
++/*
++ * arch/m68k/coldfire/mcf5445x-devices.c
++ *
++ * Coldfire M5445x Platform Device Configuration
++ *
++ * Based on the Freescale MXC devices.c
++ *
++ * Copyright (c) 2007 Freescale Semiconductor, Inc.
++ *	Kurt Mahan <kmahan@freescale.com>
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/mtd/physmap.h>
++#include <linux/platform_device.h>
++#include <linux/fsl_devices.h>
++
++#include <asm/coldfire.h>
++#include <asm/mcfsim.h>
++
++static struct resource coldfire_i2c_resources[] = {
++	[0] = {		/* I/O */
++		.start		= MCF_MBAR + 0x008F00,
++		.end		= MCF_MBAR + 0x008F20,
++		.flags		= IORESOURCE_MEM,
++	},
++	[2] = {		/* IRQ */
++		.start		= 40,
++		.end		= 40,
++		.flags		= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device coldfire_i2c_device = {
++	.name			= "MCF548X-i2c",
++	.id			= -1,
++	.num_resources		= ARRAY_SIZE(coldfire_i2c_resources),
++	.resource		= coldfire_i2c_resources,
++};
++
++static struct resource coldfire_sec_resources[] = {
++	[0] = {         /* I/O */
++		.start          = MCF_MBAR + 0x00020000,
++		.end            = MCF_MBAR + 0x00033000,
++		.flags          = IORESOURCE_MEM,
++	},
++	[2] = {         /* IRQ */
++		.start          = ISC_SEC,
++		.end            = ISC_SEC,
++		.flags          = IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device coldfire_sec_device = {
++	.name                   = "fsl-sec1",
++	.id                     = -1,
++	.num_resources          = ARRAY_SIZE(coldfire_sec_resources),
++	.resource               = coldfire_sec_resources,
++};
++
++#if defined(CONFIG_MTD_PHYSMAP)
++static struct physmap_flash_data mcf5485_flash_data = {
++	.width          = 2,
++};
++
++static struct resource mcf5485_flash_resource = {
++	.start          = 0xf8000000,
++	.end            = 0xf80fffff,
++	.flags          = IORESOURCE_MEM,
++};
++
++static struct platform_device mcf5485_flash_device = {
++	.name           = "physmap-flash",
++	.id             = 0,
++	.dev            = {
++		.platform_data  = &mcf5485_flash_data,
++	},
++	.num_resources  = 1,
++	.resource       = &mcf5485_flash_resource,
++};
++#endif
++
++static int __init mcf5485_init_devices(void)
++{
++	printk(KERN_INFO "MCF5485x INIT_DEVICES\n");
++
++	platform_device_register(&coldfire_i2c_device);
++	platform_device_register(&coldfire_sec_device);
++/*#if defined(CONFIG_MTD_PHYSMAP)
++	platform_device_register(&mcf5485_flash_device);
++#endif*/
++	return 0;
++}
++arch_initcall(mcf5485_init_devices);
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -4,6 +4,18 @@
+ 
+ menu "I2C Hardware Bus support"
+ 
++config I2C_MCF548x
++	tristate "I2C MCF547x/548x interfaces"
++	depends on I2C
++	help
++	  This allows you to use the I2C adapters found on the Freescale
++	  MCF547x/548x microcontrollers.
++	  Say Y if you own an I2C adapter belonging to this class and then say
++	  Y to the specific driver for you adapter below.
++
++	  This support is also available as a module.  If so, the module
++	  will be called i2c-algo-mcf.
++
+ config I2C_ALI1535
+ 	tristate "ALI 1535"
+ 	depends on PCI
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -52,6 +52,7 @@ obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
+ obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
+ obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
++obj-$(CONFIG_I2C_MCF548x)       += i2c-mcf548x.o
+ 
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-algo-mcf.h
+@@ -0,0 +1,23 @@
++#ifndef I2C_ALGO_MCF_H
++#define I2C_ALGO_MCF_H 1
++
++/* --- Defines for pcf-adapters ---------------------------------------	*/
++#include <linux/i2c.h>
++
++struct i2c_algo_mcf_data {
++	void *data;		/* private data for lolevel routines	*/
++	void (*setmcf) (void *data, int ctl, int val);
++	int (*getmcf) (void *data, int ctl);
++	int (*getown) (void *data);
++	int (*getclock) (void *data);
++	void (*waitforpin) (void);
++	/* local settings */
++	int udelay;
++	int mdelay;
++	int timeout;
++};
++
++int i2c_mcf_add_bus(struct i2c_adapter *);
++int i2c_mcf_del_bus(struct i2c_adapter *);
++
++#endif /* I2C_ALGO_MCF_H */
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-mcf548x.c
+@@ -0,0 +1,573 @@
++/*
++ * 	Performance and stability improvements: (C) Copyright 2008,
++ *	Adrian Cox <adrian@humboldt.co.uk>
++ *	ColdFire 547x/548x I2C master support
++ * 	Shrek Wu (b16972@freescale.com )moved the code driver/i2c/alg/mcf.c
++ *      into driver/i2c/busses.And changed the driver to a platform driver.
++ */
++#include <linux/i2c.h>
++#include "i2c-algo-mcf.h"
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/sched.h>
++#include <linux/interrupt.h>
++#include <asm/io.h>
++
++#include <asm/coldfire.h>
++#include <asm/m5485sim.h>
++#include <asm/m5485i2c.h>
++
++#define get_clock(adap) (clock)
++#define get_own(adap) 	(own)
++
++static int clock = 0x3b;  /*50000 / 1024 ~ 49 KHz*/
++module_param(clock, int, 0);
++MODULE_PARM_DESC(clock,
++	"Set I2C clock in kHz: 400=fast mode (default == 49khz)");
++
++static int own = 0x78;
++module_param(own, int, 0);
++MODULE_PARM_DESC(clock, "Set I2C Master controller address(0x78)");
++
++static struct i2c_algo_mcf_data i2c_mcf_board_data = {
++	.timeout =	10000,
++};
++
++static struct i2c_adapter i2c_mcf_board_adapter = {
++	.owner = THIS_MODULE,
++	.name = "MCF5485 adapter",
++	.id = I2C_HW_MPC107,
++	.algo_data = &i2c_mcf_board_data,
++	.class = I2C_CLASS_HWMON,
++	.timeout = 1,
++	.retries = 1
++};
++/*
++ *  static void i2c_start()
++ *
++ *  Generates START signal
++ */
++static void
++i2c_start(
++	struct i2c_algo_mcf_data *adap
++) {
++	MCF_I2CR |= MCF_I2CR_MSTA;
++}
++
++
++/*
++ *  static void i2c_stop()
++ *
++ *  Generates STOP signal
++ */
++static void
++i2c_stop(
++	struct i2c_algo_mcf_data *adap
++) {
++	MCF_I2CR &= ~MCF_I2CR_MSTA;
++}
++
++static int
++i2c_getack(
++	struct i2c_algo_mcf_data *adap
++) {
++	return !(MCF_I2SR & MCF_I2SR_RXAK);
++}
++
++/*
++ *  static void i2c_repstart()
++ *
++ *  Generates repeated start signal (without STOP while mastering the bus)
++ */
++static void
++i2c_repstart(
++	struct i2c_algo_mcf_data *adap
++) {
++	MCF_I2CR |= MCF_I2CR_RSTA;
++	MCF_I2CR |= MCF_I2CR_MTX;
++}
++
++
++/*
++ *  static void wait_for_bb()
++ *
++ *  Wait for bus idle state
++ */
++static int
++wait_for_bb(
++	struct i2c_algo_mcf_data *adap
++) {
++	int i;
++	for (i = 0; i < adap->timeout; i++) {
++		if (!(MCF_I2SR & MCF_I2SR_IBB))
++			return 0;
++		udelay(10);
++	}
++	printk(KERN_ERR "%s: timeout", __FUNCTION__);
++	return -ETIMEDOUT;
++}
++
++/*
++ *  static void wait_for_not_bb()
++ *
++ *  Wait for bus busy state
++ */
++static int
++wait_for_not_bb(
++	struct i2c_algo_mcf_data *adap
++) {
++	int i;
++	for (i = 0; i < adap->timeout; i++) {
++		if (MCF_I2SR & MCF_I2SR_IBB)
++			return 0;
++		udelay(10);
++	}
++	printk(KERN_ERR "%s: timeout", __FUNCTION__);
++	return -ETIMEDOUT;
++}
++
++/*
++ *  static void wait_xfer_done()
++ *
++ *  Wait for transfer to complete
++ */
++static int
++wait_xfer_done(
++	struct i2c_algo_mcf_data *adap
++) {
++	int i;
++
++	for (i = 0; i < adap->timeout; i++) {
++		if (MCF_I2SR & MCF_I2SR_IIF) {
++			MCF_I2SR &= ~MCF_I2SR_IIF;
++			return 0;
++		}
++		udelay(1);
++	}
++	printk(KERN_ERR "%s: timeout", __FUNCTION__);
++	return -ETIMEDOUT;
++}
++
++
++/*
++ *  static void i2c_set_addr()
++ *
++ *  Sets slave address to communicate
++ */
++static int
++i2c_set_addr(
++	struct i2c_algo_mcf_data *adap,
++	struct i2c_msg *msg,
++	int retries
++) {
++	unsigned short flags = msg->flags;
++	unsigned char addr;
++
++	if ((flags & I2C_M_TEN)) {
++		/* 10 bit address not supported yet */
++		return -EIO;
++	} else {
++		/* normal 7bit address */
++		addr = (msg->addr << 1);
++		if (flags & I2C_M_RD)
++			addr |= 1;
++		if (flags & I2C_M_REV_DIR_ADDR)
++			addr ^= 1;
++
++		MCF_I2DR = addr;
++	}
++	return 0;
++}
++
++
++/*
++ *  static void mcf_i2c_init()
++ *
++ *  Perform ColdFire i2c initialization
++ */
++static void
++mcf_i2c_init(struct i2c_algo_mcf_data *adap)
++{
++	u8 dummy;
++	/* Setup GPIO lines */
++	MCF_PAR_FECI2CIRQ |= MCF_PAR_SDA;
++	MCF_PAR_FECI2CIRQ |= MCF_PAR_SCL;
++
++	/*  Ensure slaves are in idle state */
++	if (MCF_I2SR & MCF_I2SR_IBB) {
++		MCF_I2ICR = 0x00;
++		MCF_I2CR  = 0x00;
++		MCF_I2CR  = 0x0A;
++		dummy = MCF_I2DR;
++		MCF_I2SR  = 0x00;
++		MCF_I2CR  = 0x00;
++		MCF_I2ICR = 0x01;
++	}
++
++	/* setup SCL clock */
++	MCF_I2FDR = get_clock(adap);
++
++	/* set slave address */
++	MCF_I2AR = get_own(adap);
++
++	/* enable I2C module */
++	MCF_I2CR = MCF_I2CR_IEN;
++}
++
++static int i2c_outb(
++	struct i2c_adapter *i2c_adap,
++	char c
++) {
++
++	struct i2c_algo_mcf_data *adap = i2c_adap->algo_data;
++	int timeout;
++	/* Put data to be sent */
++	MCF_I2DR = c;
++	/* Wait for xfer completed*/
++	timeout = wait_xfer_done(adap);
++	if (timeout) {
++		i2c_stop(adap);
++		wait_for_bb(adap);
++		printk(KERN_ERR "i2c-algo-mcf: %s i2c_write: "
++			"error - timeout.\n", i2c_adap->name);
++		return -EREMOTEIO; /* got a better one ?? */
++	}
++
++	return 0;
++}
++
++
++/*
++ *  static void mcf_sendbytes()
++ *
++ *  Perform tx data transfer
++ */
++static int
++mcf_sendbytes(
++	struct i2c_adapter *i2c_adap,
++	const char *buf,
++	int count, int last
++) {
++	struct i2c_algo_mcf_data *adap = i2c_adap->algo_data;
++	int ret, i;
++
++	/* Set master TX mode */
++	MCF_I2CR |= MCF_I2CR_MTX;
++
++	for (i = 0; i < count; ++i) {
++		printk(KERN_DEBUG "i2c-algo-mcf: %s i2c_write: writing %2.2X\n",
++		      i2c_adap->name, buf[i]&0xff);
++		ret = i2c_outb(i2c_adap, buf[i]);
++		if (ret < 0)
++			return ret;
++	}
++	if (last) {
++		i2c_stop(adap);
++		wait_for_bb(adap);
++	} else {
++		i2c_repstart(adap);
++	}
++
++	return (i);
++}
++
++
++/*
++ *  static void mcf_readbytes()
++ *
++ *  Perform rx data transfer
++ */
++static int
++mcf_readbytes(
++	struct i2c_adapter *i2c_adap,
++	char *buf,
++	int count, int last
++) {
++	int i;
++	struct i2c_algo_mcf_data *adap = i2c_adap->algo_data;
++	u8 dummy;
++
++	/* Set master RX mode */
++	MCF_I2CR &= ~MCF_I2CR_MTX;
++	MCF_I2CR &= ~MCF_I2CR_TXAK;
++	dummy = MCF_I2DR;
++
++	for (i = 0; i < count-1; i++) {
++		if (wait_xfer_done(adap)) {
++			i2c_stop(adap);
++			wait_for_bb(adap);
++			printk(KERN_DEBUG
++			    "i2c-algo-mcf: mcf_readbytes timed out.\n");
++			return (-1);
++		}
++
++		/* store next data byte */
++		buf[i] = MCF_I2DR;
++	}
++
++	if (wait_xfer_done(adap)) {
++		i2c_stop(adap);
++		wait_for_bb(adap);
++		printk(KERN_DEBUG "i2c-algo-mcf: mcf_readbytes timed out.\n");
++		return (-1);
++	}
++
++	/* Disable acknowlege (set I2CR.TXAK) */
++	MCF_I2CR |= MCF_I2CR_TXAK;
++	buf[i] = MCF_I2DR;
++	if (wait_xfer_done(adap)) {
++		i2c_stop(adap);
++		wait_for_bb(adap);
++		printk(KERN_DEBUG "i2c-algo-mcf: mcf_readbytes timed out.\n");
++		return (-1);
++	}
++
++	if (last) {
++		i2c_stop(adap);
++		wait_for_bb(adap);
++	} else {
++		i2c_repstart(adap);
++	}
++
++	return (i+1);
++}
++
++
++/*
++ *  static void mcf_xfer()
++ *
++ *  Perform master data I/O transfer
++ */
++static int
++mcf_xfer(
++	struct i2c_adapter *i2c_adap,
++	struct i2c_msg *msgs,
++	int num
++) {
++	struct i2c_algo_mcf_data *adap = i2c_adap->algo_data;
++	struct i2c_msg *pmsg;
++	int i;
++	int ret = 0, timeout;
++
++	/* Skip own address */
++	if (get_own(adap) == (msgs[0].addr << 1))
++		return -EIO;
++
++	/*  Ensure slaves are in idle state */
++	if (MCF_I2SR & MCF_I2SR_IBB) {
++		MCF_I2ICR = 0x00;
++		MCF_I2CR  = 0x00;
++		MCF_I2CR  = 0x0A;
++		timeout = MCF_I2DR;
++		MCF_I2SR  = 0x00;
++		MCF_I2CR  = 0x00;
++		MCF_I2ICR = 0x01;
++	}
++	/* setup SCL clock */
++	MCF_I2FDR = get_clock(adap);
++	/* set slave address */
++	MCF_I2AR = get_own(adap);
++	/* enable I2C module */
++	MCF_I2CR = MCF_I2CR_IEN;
++
++	MCF_I2CR |= MCF_I2CR_TXAK;
++
++	/* Check for bus busy */
++	wait_for_bb(adap);
++
++	for (i = 0; ret >= 0 && i < num; i++) {
++		pmsg = &msgs[i];
++
++		printk(KERN_DEBUG "i2c-algo-mcf: Doing %s %d bytes "
++			"to 0x%02x - %d of %d messages\n",
++			pmsg->flags & I2C_M_RD ? "read" : "write",
++			pmsg->len, pmsg->addr, i + 1, num);
++
++		/* Send START */
++		if (i == 0)
++			i2c_start(adap);
++
++		/* Wait for Bus Busy */
++		wait_for_not_bb(adap);
++
++		MCF_I2CR |= MCF_I2CR_MTX;
++
++		ret = i2c_set_addr(adap, pmsg, i2c_adap->retries);
++		if (ret < 0)
++			return ret;
++
++		/* Wait for address transfer completion */
++		wait_xfer_done(adap);
++
++		/* Check for ACK */
++		if (!i2c_getack(adap)) {
++			i2c_stop(adap);
++			wait_for_bb(adap);
++			printk(KERN_DEBUG "i2c-algo-mcf: No ack after "
++				    "send address in mcf_xfer\n");
++			return (-EREMOTEIO);
++		}
++
++		printk(KERN_DEBUG "i2c-algo-mcf: Msg %d, "
++				  "addr = 0x%x, flags = 0x%x, len = %d\n",
++				i, msgs[i].addr, msgs[i].flags, msgs[i].len);
++		/* Read */
++		if (pmsg->flags & I2C_M_RD) {
++			/* read bytes into buffer*/
++			ret = mcf_readbytes(i2c_adap, pmsg->buf, pmsg->len,
++						(i + 1 == num));
++
++			if (ret != pmsg->len) {
++				printk(KERN_DEBUG "i2c-algo-mcf: fail: "
++					    "only read %d bytes.\n", ret);
++			} else {
++				printk(KERN_DEBUG "i2c-algo-mcf: "
++						  "read %d bytes.\n", ret);
++			}
++		} else {
++			/* write bytes into buffer*/
++			ret = mcf_sendbytes(i2c_adap, pmsg->buf, pmsg->len,
++						(i + 1 == num));
++			if (ret != pmsg->len) {
++				printk(KERN_DEBUG "i2c-algo-mcf: fail: "
++					    "only wrote %d bytes.\n", ret);
++			} else {
++				printk(KERN_DEBUG "i2c-algo-mcf: wrote"
++					"%d bytes.\n", ret);
++			}
++		}
++	}
++
++	/* Disable I2C module */
++	MCF_I2CR = 0;
++	return (i);
++}
++
++
++/*
++ *  static void mcf_func()
++ *
++ *  Return algorithm funtionality
++ */
++static u32
++mcf_func(
++	struct i2c_adapter *i2c_adap
++) {
++	return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
++}
++
++/*
++ *  ColdFire bus algorithm callbacks
++ */
++static struct i2c_algorithm mcf_algo = {
++	.master_xfer    = mcf_xfer,
++	.functionality  = mcf_func,
++};
++
++/***********************************************************/
++struct coldfire_i2c {
++	void __iomem *base;
++	struct resource *irqarea;
++	struct resource *ioarea;
++	u32 irq;
++	struct i2c_adapter *adap;
++	u32 flags;
++};
++
++/*
++ *  registering functions to load algorithms at runtime
++ */
++int i2c_mcf_add_bus(struct i2c_adapter *adap)
++{
++	struct i2c_algo_mcf_data *mcf_adap = adap->algo_data;
++
++	/*adap->id |= mcf_algo.id;*/
++	adap->algo = &mcf_algo;
++	adap->timeout = 100;
++
++	mcf_i2c_init(mcf_adap);
++
++#ifdef MODULE
++	MOD_INC_USE_COUNT;
++#endif
++
++	i2c_add_adapter(adap);
++
++	return 0;
++}
++
++static int mcf548x_i2c_probe(struct platform_device *pdev)
++{
++	struct coldfire_i2c *i2c;
++	int rc = 0;
++
++	/************************************************************/
++	i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
++	if (!i2c) {
++		printk(KERN_ERR "%s kzalloc coldfire_i2c faile\n",
++				__FUNCTION__);
++		return -ENOMEM;
++	}
++	/****************************************************************/
++	platform_set_drvdata(pdev, i2c);
++
++	i2c->adap = &i2c_mcf_board_adapter;
++	i2c->adap->dev.parent = &pdev->dev;
++	rc = i2c_mcf_add_bus(i2c->adap);
++	if (rc < 0) {
++		printk(KERN_ERR "%s - failed to add adapter\n", __FUNCTION__);
++		rc = -ENODEV;
++		goto fail_add;
++	}
++
++	printk(KERN_INFO "i2c-algo-mcf.o: I2C ColdFire algorithm"
++			" module is loaded.\n");
++	return rc;
++
++fail_add:
++	kfree(i2c);
++	return rc;
++};
++
++static int mcf548x_i2c_remove(struct platform_device *pdev)
++{
++	struct coldfire_i2c *i2c = platform_get_drvdata(pdev);
++
++	i2c_del_adapter(i2c->adap);
++	platform_set_drvdata(pdev, NULL);
++	iounmap(i2c->base);
++	kfree(i2c);
++	return 0;
++};
++
++/* Structure for a device driver */
++static struct platform_driver mcf548x_i2c_driver = {
++	.probe 	= mcf548x_i2c_probe,
++	.remove = mcf548x_i2c_remove,
++	.driver	= {
++		.owner = THIS_MODULE,
++		.name = "MCF548X-i2c",
++	},
++};
++
++static int __init coldfire_i2c_init(void)
++{
++	return platform_driver_register(&mcf548x_i2c_driver);
++}
++
++static void __exit coldfire_i2c_exit(void)
++{
++	platform_driver_unregister(&mcf548x_i2c_driver);
++}
++
++module_init(coldfire_i2c_init);
++module_exit(coldfire_i2c_exit);
++
++MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
++MODULE_DESCRIPTION
++    ("I2C-Bus adapter for MCF547x and MCF548x processors");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/include/asm-m68k/m5485i2c.h
+@@ -0,0 +1,45 @@
++/*
++ *	m5485i2c.h -- ColdFire 547x/548x i2c controller support.
++ */
++#ifndef M548X_I2C_H
++#define M548X_I2C_H
++
++/* Register read/write macros */
++#define MCF_I2AR     MCF_REG08(0x008F00)	/* I2C Address 		 */
++#define MCF_I2FDR    MCF_REG08(0x008F04)	/* I2C Frequency Divider */
++#define MCF_I2CR     MCF_REG08(0x008F08)	/* I2C Control		 */
++#define MCF_I2SR     MCF_REG08(0x008F0C)	/* I2C Status		 */
++#define MCF_I2DR     MCF_REG08(0x008F10)	/* I2C Data I/O		 */
++#define MCF_I2ICR    MCF_REG08(0x008F20)	/* I2C Interrupt Control */
++
++/* Bit definitions and macros for MCF_I2C_I2AR */
++#define MCF_I2AR_ADR(x)    (((x)&0x7F)<<1)
++
++/* Bit definitions and macros for MCF_I2C_I2FDR */
++#define MCF_I2FDR_IC(x)    (((x)&0x3F)<<0)
++
++/* Bit definitions and macros for MCF_I2C_I2CR */
++#define MCF_I2CR_RSTA      (0x04)
++#define MCF_I2CR_TXAK      (0x08)
++#define MCF_I2CR_MTX       (0x10)
++#define MCF_I2CR_MSTA      (0x20)
++#define MCF_I2CR_IIEN      (0x40)
++#define MCF_I2CR_IEN       (0x80)
++
++/* Bit definitions and macros for MCF_I2C_I2SR */
++#define MCF_I2SR_RXAK      (0x01)
++#define MCF_I2SR_IIF       (0x02)
++#define MCF_I2SR_SRW       (0x04)
++#define MCF_I2SR_IAL       (0x10)
++#define MCF_I2SR_IBB       (0x20)
++#define MCF_I2SR_IAAS      (0x40)
++#define MCF_I2SR_ICF       (0x80)
++
++/* Bit definitions and macros for MCF_I2C_I2ICR */
++#define MCF_I2ICR_IE       (0x01)
++#define MCF_I2ICR_RE       (0x02)
++#define MCF_I2ICR_TE       (0x04)
++#define MCF_I2ICR_BNBE     (0x08)
++
++/********************************************************************/
++#endif
diff --git a/target/linux/coldfire/patches/056-m547x_8x_rtc_rv5c387a.patch b/target/linux/coldfire/patches/056-m547x_8x_rtc_rv5c387a.patch
new file mode 100644
index 0000000000..4d5db0ae4c
--- /dev/null
+++ b/target/linux/coldfire/patches/056-m547x_8x_rtc_rv5c387a.patch
@@ -0,0 +1,127 @@
+From 1353cd9749377dbcc8290dab5c098deec66fb956 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 15 May 2008 13:24:58 -0600
+Subject: [PATCH] Add RTC RV5C387A driver for MCF547x and MCF548x.
+
+LTIBName: m547x-8x-rtc-rv5c387a
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+Signed-off-by: Shrek Wu <b16972@freescale.com>
+---
+ drivers/rtc/rtc-rs5c372.c |   67 +++++++++++++++++++++++++++++++++++++++++---
+ 1 files changed, 62 insertions(+), 5 deletions(-)
+
+--- a/drivers/rtc/rtc-rs5c372.c
++++ b/drivers/rtc/rtc-rs5c372.c
+@@ -15,7 +15,6 @@
+ 
+ #define DRV_VERSION "0.5"
+ 
+-
+ /*
+  * Ricoh has a family of I2C based RTCs, which differ only slightly from
+  * each other.  Differences center on pinout (e.g. how many interrupts,
+@@ -60,6 +59,15 @@
+ /* to read (style 1) or write registers starting at R */
+ #define RS5C_ADDR(R)		(((R) << 4) | 0)
+ 
++#ifdef CONFIG_M547X_8X
++#define DRV_NAME "rv5c387a"
++/* i2c configuration */
++#define RV5C387_I2C_ADDR 0x32
++static unsigned short normal_i2c[] = {
++	RV5C387_I2C_ADDR, I2C_CLIENT_END
++};
++I2C_CLIENT_INSMOD; /* defines addr_data */
++#endif
+ 
+ enum rtc_type {
+ 	rtc_undef = 0,
+@@ -506,14 +514,14 @@ static int rs5c372_probe(struct i2c_clie
+ 		err = -ENODEV;
+ 		goto exit;
+ 	}
+-
+-	if (!(rs5c372 = kzalloc(sizeof(struct rs5c372), GFP_KERNEL))) {
++	rs5c372 = kzalloc(sizeof(struct rs5c372), GFP_KERNEL);
++	if (!rs5c372) {
+ 		err = -ENOMEM;
+ 		goto exit;
+ 	}
+ 
+ 	/* we read registers 0x0f then 0x00-0x0f; skip the first one */
+-	rs5c372->regs=&rs5c372->buf[1];
++	rs5c372->regs = &rs5c372->buf[1];
+ 
+ 	rs5c372->client = client;
+ 	i2c_set_clientdata(client, rs5c372);
+@@ -605,7 +613,7 @@ static int rs5c372_probe(struct i2c_clie
+ 			case rtc_rv5c386:	s = "rv5c386"; break;
+ 			case rtc_rv5c387a:	s = "rv5c387a"; break;
+ 			default:		s = "chip"; break;
+-			}; s;}),
++			}; s; }),
+ 			rs5c372->time24 ? "24hr" : "am/pm"
+ 			);
+ 
+@@ -645,12 +653,61 @@ static int rs5c372_remove(struct i2c_cli
+ 	return 0;
+ }
+ 
++#ifdef CONFIG_M547X_8X
++static int rv5c387_probe(struct i2c_adapter *adapter, int addr, int kind)
++{
++	int rc = 0;
++	struct i2c_client *new_client = NULL;
++
++	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
++		rc = -ENODEV;
++		printk(KERN_DEBUG "%s i2c_check_functionality\n", __FUNCTION__);
++		goto failout;
++	}
++
++	new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
++	if (new_client == NULL) {
++		rc = -ENOMEM;
++		printk(KERN_DEBUG "%s kzalloc new_client\n", __FUNCTION__);
++		goto failout;
++	}
++
++	new_client->addr = addr;
++	new_client->adapter = adapter;
++	new_client->driver = &rs5c372_driver;
++	new_client->flags = 0;
++	strcpy(new_client->name, DRV_NAME);
++
++	rc = i2c_attach_client(new_client);
++	if (rc < 0) {
++		printk(KERN_DEBUG "%s i2c_attach_client\n", __FUNCTION__);
++		goto failout;
++	}
++
++	rs5c372_probe(new_client);
++	return 0;
++failout:
++	kfree(new_client);
++	return rc;
++}
++
++static int
++rv5c387_attach_adapter(struct i2c_adapter *adapter)
++{
++	return i2c_probe(adapter, &addr_data, rv5c387_probe);
++}
++#endif
++
+ static struct i2c_driver rs5c372_driver = {
+ 	.driver		= {
+ 		.name	= "rtc-rs5c372",
+ 	},
++#ifdef CONFIG_M547X_8X
++	.attach_adapter = &rv5c387_attach_adapter,
++#else
+ 	.probe		= rs5c372_probe,
+ 	.remove		= rs5c372_remove,
++#endif
+ };
+ 
+ static __init int rs5c372_init(void)
diff --git a/target/linux/coldfire/patches/057-mcfv4e_add_mm_args.patch b/target/linux/coldfire/patches/057-mcfv4e_add_mm_args.patch
new file mode 100644
index 0000000000..483f030d95
--- /dev/null
+++ b/target/linux/coldfire/patches/057-mcfv4e_add_mm_args.patch
@@ -0,0 +1,55 @@
+From a2360b8ebb8b2b0d55f8aea3fdce51bce9b57b10 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 15 May 2008 15:48:59 -0600
+Subject: [PATCH] Add mm arg to pte/pmd/pud/pgd_free and add pmd_pgtable macro.
+
+Add mm argument to pte/pmd/pud/pgd_free as per commit
+5e5419734c8719cbc01af959ad9c0844002c0df5.
+
+LTIBName: mcfv4e-add-mm-args
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ include/asm-m68k/cf_pgalloc.h |   10 ++++++----
+ 1 files changed, 6 insertions(+), 4 deletions(-)
+
+--- a/include/asm-m68k/cf_pgalloc.h
++++ b/include/asm-m68k/cf_pgalloc.h
+@@ -6,7 +6,7 @@
+ #include <asm/cf_tlbflush.h>
+ #include <asm/cf_cacheflush.h>
+ 
+-extern inline void pte_free_kernel(pte_t *pte)
++extern inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+ {
+ 	free_page((unsigned long) pte);
+ }
+@@ -40,6 +40,8 @@ extern inline pmd_t *pmd_alloc_kernel(pg
+ 
+ #define pmd_populate_kernel(mm, pmd, pte) (pmd_val(*pmd) = (unsigned long)(pte))
+ 
++#define pmd_pgtable(pmd) pmd_page(pmd)
++
+ static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *page)
+ {
+ 	__free_page(page);
+@@ -68,7 +70,7 @@ static inline struct page *pte_alloc_one
+ 	return page;
+ }
+ 
+-extern inline void pte_free(struct page *page)
++extern inline void pte_free(struct mm_struct *mm, struct page *page)
+ {
+ 	__free_page(page);
+ }
+@@ -77,9 +79,9 @@ extern inline void pte_free(struct page 
+  * In our implementation, each pgd entry contains 1 pmd that is never allocated
+  * or freed.  pgd_present is always 1, so this should never be called. -NL
+  */
+-#define pmd_free(pmd) BUG()
++#define pmd_free(mm, pmd) BUG()
+ 
+-extern inline void pgd_free(pgd_t *pgd)
++extern inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+ {
+ 	free_page((unsigned long) pgd);
+ }
diff --git a/target/linux/coldfire/patches/058-mcfv4e_tlsnptl_elf_reloc.patch b/target/linux/coldfire/patches/058-mcfv4e_tlsnptl_elf_reloc.patch
new file mode 100644
index 0000000000..849e3a6abe
--- /dev/null
+++ b/target/linux/coldfire/patches/058-mcfv4e_tlsnptl_elf_reloc.patch
@@ -0,0 +1,43 @@
+From a64bac5fc75aa2872a8abe54a9f9aaa0fce31588 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 22 May 2008 09:50:31 -0600
+Subject: [PATCH] Add elf relocation types for TLS/NPTL.
+
+These relocations are from the draft TLS/NPTL ABI document v0.2
+by Joseph Myers of CodeSourcery.
+
+LTIBName: mcfv4e-tlsnptl-elf-reloc
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ include/asm-m68k/elf.h |   20 ++++++++++++++++++++
+ 1 files changed, 20 insertions(+), 0 deletions(-)
+
+--- a/include/asm-m68k/elf.h
++++ b/include/asm-m68k/elf.h
+@@ -34,6 +34,26 @@
+ #define R_68K_GLOB_DAT	20
+ #define R_68K_JMP_SLOT	21
+ #define R_68K_RELATIVE	22
++/* TLS static relocations */
++#define	R_68K_TLS_GD32		25
++#define	R_68K_TLS_GD16		26
++#define	R_68K_TLS_GD8		27
++#define	R_68K_TLS_LDM32		28
++#define	R_68K_TLS_LDM16		29
++#define	R_68K_TLS_LDM8		30
++#define	R_68K_TLS_LDO32		31
++#define	R_68K_TLS_LDO16		32
++#define	R_68K_TLS_LDO8		33
++#define	R_68K_TLS_IE32		34
++#define	R_68K_TLS_IE16		35
++#define	R_68K_TLS_IE8		36
++#define	R_68K_TLS_LE32		37
++#define	R_68K_TLS_LE16		38
++#define	R_68K_TLS_LE8		39
++/* TLS dynamic relocations */
++#define	R_68K_TLS_DTPMOD32	40
++#define	R_68K_TLS_DTPREL32	41
++#define	R_68K_TLS_TPREL32	42
+ 
+ typedef unsigned long elf_greg_t;
+ 
diff --git a/target/linux/coldfire/patches/059-mcfv4e_vdso_headers.patch b/target/linux/coldfire/patches/059-mcfv4e_vdso_headers.patch
new file mode 100644
index 0000000000..f430ab3623
--- /dev/null
+++ b/target/linux/coldfire/patches/059-mcfv4e_vdso_headers.patch
@@ -0,0 +1,79 @@
+From a05af27aec00eacf533ff111ba8eb3dec328d9af Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 22 May 2008 11:20:53 -0600
+Subject: [PATCH] Initial vDSO header changes.
+
+LTIBName: mcfv4e-vdso-headers
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ include/asm-m68k/auxvec.h |    9 +++++++++
+ include/asm-m68k/elf.h    |   31 +++++++++++++++++++++++++++++++
+ include/asm-m68k/page.h   |    5 +++++
+ 3 files changed, 45 insertions(+), 0 deletions(-)
+
+--- a/include/asm-m68k/auxvec.h
++++ b/include/asm-m68k/auxvec.h
+@@ -1,4 +1,13 @@
+ #ifndef __ASMm68k_AUXVEC_H
+ #define __ASMm68k_AUXVEC_H
++/*
++ * Architecture-neutral AT_ values in 0-17, leave some room
++ * for more of them.
++ */
++
++#ifdef CONFIG_VSYSCALL
++/* Entry point to the vsyscall page */
++#define	AT_SYSINFO_EHDR		33
++#endif
+ 
+ #endif
+--- a/include/asm-m68k/elf.h
++++ b/include/asm-m68k/elf.h
+@@ -136,4 +136,35 @@ typedef struct user_m68kfp_struct elf_fp
+ 
+ #define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+ 
++/*
++ * VDSO
++ */
++#ifdef CONFIG_VSYSCALL
++extern unsigned int vdso_enabled;
++
++#define	VDSO_BASE		((unsigned long)current->mm->context.vdso)
++#define	VDSO_SYM(x)		(VDSO_BASE + (unsigned long)(x))
++
++#define	VSYSCALL_AUX_ENT					\
++	if (vdso_enabled)					\
++		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);
++
++/* additional pages */
++#define ARCH_HAS_SETUP_ADDITIONAL_PAGES	1
++
++struct linux_binprm;
++extern int arch_setup_additional_pages(struct linux_binprm *bprm,
++				       int executable_stack);
++
++#else
++/* no VSYSCALL_AUX_ENT */
++#define	VSYSCALL_AUX_ENT
++#endif
++
++#define ARCH_DLINFO						\
++do {								\
++	/* vsyscall entry */					\
++	VSYSCALL_AUX_ENT;					\
++} while (0);
++
+ #endif
+--- a/include/asm-m68k/page.h
++++ b/include/asm-m68k/page.h
+@@ -252,4 +252,9 @@ static inline __attribute_const__ int __
+ 
+ #include <asm-generic/page.h>
+ 
++#ifdef CONFIG_VSYSCALL
++/* vDSO support */
++#define __HAVE_ARCH_GATE_AREA
++#endif
++
+ #endif /* _M68K_PAGE_H */
diff --git a/target/linux/coldfire/patches/060-m547x_8x_move_memmap.patch b/target/linux/coldfire/patches/060-m547x_8x_move_memmap.patch
new file mode 100644
index 0000000000..01d7a6ea99
--- /dev/null
+++ b/target/linux/coldfire/patches/060-m547x_8x_move_memmap.patch
@@ -0,0 +1,152 @@
+From 961a1f1ccbb2121a4e650cd64ca1f5c15b232e18 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 29 May 2008 22:03:08 -0600
+Subject: [PATCH] Update M547x/M548x memory map.
+
+- Move internal memory
+  0xF0000000 MBAR
+  0xF1000000 MMUBAR
+  0xF3000000 RAMBAR0
+  0xF3001000 RAMBAR1
+
+- Move KMAP area
+  0xD0000000 -> 0xDFFFFFFF
+
+- Update pagefault code for KMAP area
+
+LTIBName: m547x-8x-move-memmap
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/head.S   |    2 +-
+ arch/m68k/mm/cf-mmu.c       |   20 ++++++++++----------
+ arch/m68k/mm/kmap.c         |   18 +++++++++++++++---
+ include/asm-m68k/coldfire.h |    8 ++++----
+ include/asm-m68k/pgtable.h  |    4 ++--
+ 5 files changed, 32 insertions(+), 20 deletions(-)
+
+--- a/arch/m68k/coldfire/head.S
++++ b/arch/m68k/coldfire/head.S
+@@ -87,7 +87,7 @@
+ #else
+ #if defined(CONFIG_M54455)
+ #elif defined(CONFIG_M547X_8X)
+-#define ACR0_DEFAULT	#0xE000C040   /* ACR0 default value */
++#define ACR0_DEFAULT	#0xF00FC040   /* ACR0 default value */
+ #define ACR1_DEFAULT	#0x000FA008   /* ACR1 default value */
+ #define ACR2_DEFAULT	#0x00000000   /* ACR2 default value */
+ #define ACR3_DEFAULT	#0x000FA008   /* ACR3 default value */
+--- a/arch/m68k/mm/cf-mmu.c
++++ b/arch/m68k/mm/cf-mmu.c
+@@ -35,11 +35,9 @@
+ #include <asm/coldfire.h>
+ #include <asm/tlbflush.h>
+ 
+-#if PAGE_OFFSET == CONFIG_SDRAM_BASE
+-#define	KERNRAM(x) ((x >= PAGE_OFFSET) && (x < (PAGE_OFFSET + CONFIG_SDRAM_SIZE)))
+-#else
+-#define	KERNRAM(x) (x >= PAGE_OFFSET)
+-#endif
++#define KMAPAREA(x)	((x >= KMAP_START) && ( x < KMAP_END))
++
++#undef DEBUG
+ 
+ mm_context_t next_mmu_context;
+ unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
+@@ -162,7 +160,7 @@ int cf_tlb_miss(struct pt_regs *regs, in
+ 	mmuar = ( dtlb ) ? regs->mmuar
+ 			 : regs->pc + (extension_word * sizeof(long));
+ 
+-        mm = (!user_mode(regs) && KERNRAM(mmuar)) ? &init_mm : current->mm;
++        mm = (!user_mode(regs) && KMAPAREA(mmuar)) ? &init_mm : current->mm;
+ 
+         if (!mm) {
+ 	    local_irq_restore(flags);
+@@ -181,7 +179,7 @@ int cf_tlb_miss(struct pt_regs *regs, in
+ 	    return (-1);
+ 	}	
+     
+-	pte = (KERNRAM(mmuar)) ? pte_offset_kernel(pmd, mmuar)
++	pte = (KMAPAREA(mmuar)) ? pte_offset_kernel(pmd, mmuar)
+ 	                       : pte_offset_map(pmd, mmuar);
+     	if (pte_none(*pte) || !pte_present(*pte)) {
+ 	    local_irq_restore(flags);
+@@ -198,7 +196,7 @@ int cf_tlb_miss(struct pt_regs *regs, in
+ 	
+         set_pte(pte, pte_mkyoung(*pte));
+         asid = mm->context & 0xff;
+-        if (!pte_dirty(*pte) && !KERNRAM(mmuar))
++        if (!pte_dirty(*pte) && !KMAPAREA(mmuar))
+     	    set_pte(pte, pte_wrprotect(*pte));
+ 
+         *MMUTR = (mmuar & PAGE_MASK) | (asid << CF_ASID_MMU_SHIFT)
+@@ -216,8 +214,10 @@ int cf_tlb_miss(struct pt_regs *regs, in
+ 
+ 	asm("nop");
+ 
+-	/*printk("cf_tlb_miss: va=%lx, pa=%lx\n", (mmuar & PAGE_MASK), 
+-		  (pte_val(*pte)  & PAGE_MASK));*/
++#ifdef DEBUG
++	printk("cf_tlb_miss: va=%lx, pa=%lx\n", (mmuar & PAGE_MASK), 
++		  (pte_val(*pte)  & PAGE_MASK));
++#endif
+ 	local_irq_restore(flags);
+         return (0);
+ }
+--- a/arch/m68k/mm/kmap.c
++++ b/arch/m68k/mm/kmap.c
+@@ -135,10 +135,22 @@ void __iomem *__ioremap(unsigned long ph
+ 
+ #ifdef CONFIG_M54455
+ 	if (physaddr >= 0xf0000000) {
+-		/* short circuit mappings for xf0000000 */
+-#ifdef DEBUG
+-		printk(KERN_INFO "ioremap: short circuiting 0x%lx mapping\n", physaddr);
++		/*
++	 	 * On the M5445x processors an ACR is setup to map
++		 * the 0xF0000000 range into kernel memory as
++		 * non-cacheable.
++		 */
++		return (void __iomem *)physaddr;
++	}
+ #endif
++
++#ifdef CONFIG_M547X_8X
++	if (physaddr >= 0xf0000000) {
++		/*
++	 	 * On the M547x/M548x processors an ACR is setup to map
++		 * the 0xF0000000 range into kernel memory as
++		 * non-cacheable.
++		 */
+ 		return (void __iomem *)physaddr;
+ 	}
+ #endif
+--- a/include/asm-m68k/coldfire.h
++++ b/include/asm-m68k/coldfire.h
+@@ -6,10 +6,10 @@
+ #define MCF_RAMBAR1 	0x40000000
+ #define MCF_SRAM	0x80000000
+ #elif defined(CONFIG_M547X_8X)
+-#define MCF_MBAR	0xE0000000
+-#define MCF_MMUBAR	0xE1000000
+-#define MCF_RAMBAR0	0xE3000000
+-#define MCF_RAMBAR1	0xE3001000
++#define MCF_MBAR	0xF0000000
++#define MCF_MMUBAR	0xF1000000
++#define MCF_RAMBAR0	0xF3000000
++#define MCF_RAMBAR1	0xF3001000
+ #endif
+ 
+ #define MCF_CLK     	CONFIG_MCFCLK
+--- a/include/asm-m68k/pgtable.h
++++ b/include/asm-m68k/pgtable.h
+@@ -73,8 +73,8 @@
+ #define KMAP_START     0x0DC00000
+ #define KMAP_END       0x0E000000
+ #elif defined(CONFIG_COLDFIRE)
+-#define KMAP_START	0xe0000000
+-#define KMAP_END	0xf0000000
++#define KMAP_START	0xd0000000
++#define KMAP_END	0xe0000000
+ #else
+ #define	KMAP_START	0xd0000000
+ #define	KMAP_END	0xf0000000
diff --git a/target/linux/coldfire/patches/061-m5445x_rename_config.patch b/target/linux/coldfire/patches/061-m5445x_rename_config.patch
new file mode 100644
index 0000000000..8f898e3165
--- /dev/null
+++ b/target/linux/coldfire/patches/061-m5445x_rename_config.patch
@@ -0,0 +1,791 @@
+From 778c1668df4a4c634fae8ef99a05120121cce838 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 18 Jun 2008 15:17:31 -0600
+Subject: [PATCH] Convert CONFIG_M54455 to CONFIG_M5445X for clarity.
+
+LTIBName: m5445x-rename-config
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/Kconfig                |   50 ++++++++++++++++++++++++++++---------
+ arch/m68k/Makefile               |    2 +-
+ arch/m68k/coldfire/Makefile      |    2 +-
+ arch/m68k/coldfire/config.c      |   33 +++++++++++++++----------
+ arch/m68k/coldfire/head.S        |   23 ++++++++++-------
+ arch/m68k/coldfire/ints.c        |    6 ++--
+ arch/m68k/kernel/dma.c           |    4 +-
+ arch/m68k/kernel/setup.c         |    2 +-
+ arch/m68k/mm/kmap.c              |    2 +-
+ drivers/crypto/Kconfig           |   12 ++++----
+ drivers/crypto/mcfcau-aes.c      |    2 +-
+ drivers/crypto/mcfcau-des.c      |    2 +-
+ drivers/crypto/mcfcau-md5.c      |    2 +-
+ drivers/crypto/mcfcau-sha1.c     |    2 +-
+ drivers/crypto/mcfcau.c          |    2 +-
+ drivers/crypto/mcfcau.h          |    2 +-
+ drivers/net/Kconfig              |    2 +-
+ drivers/net/fec.c                |   10 ++++----
+ drivers/net/fec.h                |    2 +-
+ drivers/serial/mcfserial.c       |    8 +++---
+ drivers/spi/coldfire_edma.c      |    4 +-
+ drivers/spi/spi_coldfire.c       |    2 +-
+ drivers/spi/ssi_audio.c          |    2 +-
+ include/asm-m68k/cfcache.h       |    2 +-
+ include/asm-m68k/coldfire.h      |    4 +-
+ include/asm-m68k/coldfire_edma.h |    4 +-
+ include/asm-m68k/mcfsim.h        |    2 +-
+ include/asm-m68k/mcfuart.h       |    2 +-
+ include/asm-m68k/page_offset.h   |    2 +-
+ include/asm-m68k/setup.h         |    2 +-
+ 30 files changed, 116 insertions(+), 80 deletions(-)
+
+--- a/arch/m68k/Kconfig
++++ b/arch/m68k/Kconfig
+@@ -56,7 +56,7 @@ config ARCH_MAY_HAVE_PC_FDC
+ 	default y
+ 
+ config NO_IOPORT
+-	def_bool !(M54455 || M547X_8X)
++	def_bool !(M5445X || M547X_8X)
+ 
+ config NO_DMA
+ 	def_bool SUN3
+@@ -143,7 +143,7 @@ config CFV4E
+ 
+ config MCD_DMA
+ 	bool "ColdFire MCD DMA support"
+-	depends on CFV4E
++	depends on M547X_8X
+ 	default y
+ 	help
+ 	  This enables support for the ColdFire 547x/548x family
+@@ -177,7 +177,7 @@ config HADES
+ config PCI
+ 	bool
+ 	depends on HADES || M54455
+-	default y
++	default n
+ 	help
+ 	  Find out whether you have a PCI motherboard. PCI is the name of a
+ 	  bus system, i.e. the way the CPU talks to the other stuff inside
+@@ -325,11 +325,34 @@ config M68060
+ 	  If you anticipate running this kernel on a computer with a MC68060
+ 	  processor, say Y. Otherwise, say N.
+ 
+-config M54455
+-	bool "MCF54455 support"
++config M5445X
++	bool "MCF5445x support"
+ 	depends on COLDFIRE
+ 	help
+-          This option will add support for the MCF54455 processor with mmu.
++          This option will add support for the MCF5445 processor with mmu.
++
++config M54451
++	bool
++	depends on M5445X
++	default n
++
++config M54455
++	bool
++	depends on M5445X
++	default n
++
++choice
++	prompt "Model"
++	depends on M5445X
++	default M54451EVB
++	config M54451EVB
++		bool "M54451EVB"
++		select M54451
++	config M54455EVB
++		bool "M54455EVB"
++		select M54455
++endchoice
++
+ 
+ config M547X_8X
+ 	bool "MCF547x/MCF548x support"
+@@ -393,7 +416,8 @@ endchoice
+ 
+ config MCFCLK
+ 	int
+-	default 266666666 if M54455
++	default 266666666 if M54455EVB
++	default 240000000 if M54451EVB
+ 	default 266000000 if M547X
+ 	default 200000000 if M548X
+ 	help
+@@ -401,7 +425,7 @@ config MCFCLK
+ 
+ config MCF_USER_HALT
+ 	bool "Coldfire User Halt Enable"
+-	depends on M54455 || M547X_8X
++	depends on M5445X || M547X_8X
+ 	default n
+ 	help
+ 	  Enables the HALT instruction in User Mode.
+@@ -420,19 +444,21 @@ config MMU_CFV4E
+ config SDRAM_BASE
+ 	hex
+ 	depends on COLDFIRE
+-	default 0x40000000 if M54455
++	default 0x40000000 if M5445X
+ 	default 0x00000000 if M547X_8X
+ 
+ config SDRAM_SIZE
+ 	hex
+ 	depends on COLDFIRE
+-	default 0x0FFFFFFF if M54455
++	default 0x08000000 if M54451EVB
++	default 0x10000000 if M54455EVB
+ 	default 0x04000000 if M547X_8X
+ 
+ config NOR_FLASH_BASE
+ 	hex "NOR Flash Base Address"
+-	depends on M54455
+-	default 0x00000000
++	depends on COLDFIRE
++	default 0x00000000 if M54451EVB
++	default 0x00000000 if M54455EVB
+ 
+ config M68KFPU_EMU
+ 	bool "Math emulation support (EXPERIMENTAL)"
+--- a/arch/m68k/Makefile
++++ b/arch/m68k/Makefile
+@@ -59,7 +59,7 @@ endif
+ endif
+ endif
+ 
+-ifdef CONFIG_M54455
++ifdef CONFIG_M5445X
+ KBUILD_CFLAGS += -march=isac -mcpu=54455 -msoft-float -g
+ KBUILD_AFLAGS += -march=isac -mcpu=54455 -msoft-float  
+ endif
+--- a/arch/m68k/coldfire/Makefile
++++ b/arch/m68k/coldfire/Makefile
+@@ -9,7 +9,7 @@ ifneq ($(strip $(CONFIG_USB) $(CONFIG_US
+ endif
+ 
+ obj-$(CONFIG_PCI)	+= pci.o mcf5445x-pci.o iomap.o
+-obj-$(CONFIG_M54455)	+= mcf5445x-devices.o
++obj-$(CONFIG_M5445X)	+= mcf5445x-devices.o
+ obj-$(CONFIG_M547X_8X)	+= m547x_8x-devices.o
+ obj-$(CONFIG_M547X_8X)	+= mcf548x-devices.o
+ obj-$(CONFIG_MCD_DMA)	+= m547x_8x-dma.o
+--- a/arch/m68k/coldfire/config.c
++++ b/arch/m68k/coldfire/config.c
+@@ -35,14 +35,14 @@
+ 
+ #include <asm/mcfsim.h>
+ 
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ #define UBOOT_EXTRA_CLOCKS
+ #elif defined(CONFIG_M547X_8X)
+ #define UBOOT_PCI
+ #endif
+ #include <asm/bootinfo.h>
+ 
+-#ifdef CONFIG_M54455
++#ifdef CONFIG_M5445X
+ #include <asm/mcf5445x_intc.h>
+ #include <asm/mcf5445x_sdramc.h>
+ #include <asm/mcf5445x_fbcs.h>
+@@ -132,8 +132,9 @@ int __init uboot_commandline(char *boota
+ /*
+  * This routine does things not done in the bootloader.
+  */
+-#if defined(CONFIG_M54455)
+-#define DEFAULT_COMMAND_LINE "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
++#if defined(CONFIG_M5445X)
++#define FOO_DEFAULT_COMMAND_LINE "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
++#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe/rootfs/ ip=172.27.155.51:172.27.155.1"
+ #elif defined(CONFIG_M547X_8X)
+ #define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/rigo/rootfs/ ip=172.27.155.85:172.27.155.1"
+ #endif
+@@ -143,14 +144,14 @@ asmlinkage void __init cf_early_init(voi
+ 
+ 	extern char _end;
+ 
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ 	SET_VBR((void *)MCF_RAMBAR1);
+ #elif defined(CONFIG_M547X_8X)
+ 	SET_VBR((void *)MCF_RAMBAR0);
+ #endif
+ 
+ 	/* Mask all interrupts */
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ 	MCF_INTC0_IMRL = 0xFFFFFFFF;
+ 	MCF_INTC0_IMRH = 0xFFFFFFFF;
+ 	MCF_INTC1_IMRL = 0xFFFFFFFF;
+@@ -160,7 +161,7 @@ asmlinkage void __init cf_early_init(voi
+ 	MCF_IMRH = 0xFFFFFFFF;
+ #endif
+ 
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ #if defined(CONFIG_NOR_FLASH_BASE)
+ 	MCF_FBCS_CSAR(1) = CONFIG_NOR_FLASH_BASE;
+ #else
+@@ -171,9 +172,9 @@ asmlinkage void __init cf_early_init(voi
+ 	/* Init optional SDRAM chip select */
+ 	MCF_SDRAMC_SDCS(1) = (256*1024*1024) | 0x1B;
+ #endif
+-#endif /* CONFIG_M54455 */
++#endif /* CONFIG_M5445X */
+ 
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ 	/* Setup SDRAM crossbar(XBS) priorities */
+ 	MCF_XBS_PRS2 = (MCF_XBS_PRS_M0(MCF_XBS_PRI_2) |
+ 			MCF_XBS_PRS_M1(MCF_XBS_PRI_3) |
+@@ -193,6 +194,7 @@ asmlinkage void __init cf_early_init(voi
+ 	m68k_memory[m68k_num_memory].addr = CONFIG_SDRAM_BASE;
+ 	m68k_memory[m68k_num_memory++].size = CONFIG_SDRAM_SIZE;
+ 
++#if 0
+ 	if (!uboot_commandline(m68k_command_line)) {
+ #if defined(CONFIG_BOOTPARAM)
+ 		strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE-1);
+@@ -200,6 +202,10 @@ asmlinkage void __init cf_early_init(voi
+ 		strcpy(m68k_command_line, DEFAULT_COMMAND_LINE);
+ #endif
+ 	}
++#endif
++/* JKM -- temporary! */
++strcpy(m68k_command_line, DEFAULT_COMMAND_LINE);
++/* JKM -- temporary! */
+ 
+ #if defined(CONFIG_BLK_DEV_INITRD)
+ 	/* add initrd image */
+@@ -223,9 +229,10 @@ asmlinkage void __init cf_early_init(voi
+ 
+ 	/* Turn on caches via CACR, enable EUSP */
+ 	cacr_set(CACHE_INITIAL_MODE);
++
+ }
+ 
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ void settimericr(unsigned int timer, unsigned int level)
+ {
+ 	volatile unsigned char *icrp;
+@@ -256,7 +263,7 @@ void __init coldfire_trap_init(void)
+ 	int i = 0;
+ 	e_vector *vectors;
+ 
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ 	vectors = (e_vector *)MCF_RAMBAR1;
+ #elif defined(CONFIG_M547X_8X)
+ 	vectors = (e_vector *)MCF_RAMBAR0;
+@@ -281,7 +288,7 @@ void __init coldfire_trap_init(void)
+ 	vectors[32] = system_call;
+ }
+ 
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ 
+ void coldfire_tick(void)
+ {
+@@ -369,7 +376,7 @@ unsigned long coldfire_gettimeoffset(voi
+ 
+ void coldfire_reboot(void)
+ {
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ 	/* disable interrupts and do a software reset */
+ 	asm("movew #0x2700, %%sr\n\t"
+ 	    "moveb #0x80, %%d0\n\t"
+--- a/arch/m68k/coldfire/head.S
++++ b/arch/m68k/coldfire/head.S
+@@ -63,8 +63,8 @@
+  *     None currently (mapped via TLBs)
+  */
+ 
+-#if CONFIG_SDRAM_BASE != PAGE_BASE
+-#if defined(CONFIG_M54455)
++#if CONFIG_SDRAM_BASE != PAGE_OFFSET
++#if defined(CONFIG_M5445X)
+ #if 0
+ #define ACR0_DEFAULT	#0xA00FA048   /* ACR0 default value */
+ #endif
+@@ -85,7 +85,11 @@
+ #endif
+ 
+ #else
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
++#define ACR0_DEFAULT	#0xF00FC040   /* ACR0 default value */
++#define ACR1_DEFAULT	#0x400FA008   /* ACR1 default value */
++#define ACR2_DEFAULT	#0x00000000   /* ACR2 default value */
++#define ACR3_DEFAULT	#0x400FA008   /* ACR3 default value */
+ #elif defined(CONFIG_M547X_8X)
+ #define ACR0_DEFAULT	#0xF00FC040   /* ACR0 default value */
+ #define ACR1_DEFAULT	#0x000FA008   /* ACR1 default value */
+@@ -280,7 +284,7 @@ ENTRY(__start)
+ 	subl	%a0,%a0
+ 	movel	%a0,%usp
+ 
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ 	movel  #(MCF_RAMBAR1 + 0x221), %d0
+ 	movec   %d0, %rambar1
+ #elif defined(CONFIG_M547X_8X)
+@@ -331,12 +335,11 @@ _loop_bss:
+ 	cmpl	%a0,%a1
+ 	bne	_loop_bss
+ #endif
+-
+ 	/* If you change the memory size to another value make a matching 
+ 	   change in paging_init(cf-mmu.c) to zones_size[]. */
+ 
+ #if CONFIG_SDRAM_BASE != PAGE_OFFSET
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ 	/* Map 256MB as code */
+ 	mmu_map	(PAGE_OFFSET+0*0x1000000),  (PHYS_OFFSET+0*0x1000000), \
+ 		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC,  MMUDR_SP, \
+@@ -502,7 +505,7 @@ _loop_bss:
+ 	 * enabled and we are executing in high memory.
+ 	 */
+ 
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ 	/* Map first 16 MB as code */
+ 	mmu_map	(PHYS_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), \
+ 		MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_INC,  MMUDR_SP, 0, \
+@@ -562,7 +565,7 @@ ENTRY(__running_high)
+ 
+ 	/* Unmap unity mappings */
+ #if CONFIG_SDRAM_BASE != PAGE_OFFSET
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ 	mmu_unmap (PHYS_OFFSET+0*0x1000000), MMUOR_ITLB, %d0
+ 	mmu_unmap (PHYS_OFFSET+0*0x1000000), 0, %d0
+ #elif defined(CONFIG_M547X_8X)
+@@ -599,9 +602,9 @@ func_start	set_context,%d0,(1*4)
+ 	movec	%d0,%asid
+ func_return	set_context
+ 
+-#ifdef CONFIG_M54455
++#ifdef CONFIG_M5445X
+ /*
+- * set_fpga(addr,val) on the M54455EVB
++ * set_fpga(addr,val) on the M5445X
+  *
+  * Map in 0x00000000 -> 0x0fffffff and then do the write.
+  */
+--- a/arch/m68k/coldfire/ints.c
++++ b/arch/m68k/coldfire/ints.c
+@@ -47,7 +47,7 @@ static int irq_depth[SYS_IRQS];
+ /*
+  * IRQ Controller
+  */
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ void m5445x_irq_enable(unsigned int irq);
+ void m5445x_irq_disable(unsigned int irq);
+ static struct irq_controller m5445x_irq_controller = {
+@@ -87,7 +87,7 @@ void __init init_IRQ(void)
+ {
+ 	int i;
+ 
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ 	for (i = 0; i < SYS_IRQS; i++)
+ 		irq_controller[i] = &m5445x_irq_controller;
+ #elif defined(CONFIG_M547X_8X)
+@@ -337,7 +337,7 @@ asmlinkage void handle_badint(struct pt_
+ }
+ EXPORT_SYMBOL(handle_badint);
+ 
+-#ifdef CONFIG_M54455
++#ifdef CONFIG_M5445X
+ /*
+  * M5445X Implementation
+  */
+--- a/arch/m68k/kernel/dma.c
++++ b/arch/m68k/kernel/dma.c
+@@ -17,7 +17,7 @@
+ void *dma_alloc_coherent(struct device *dev, size_t size,
+ 			 dma_addr_t *handle, gfp_t flag)
+ {
+-#ifndef CONFIG_M54455
++#ifndef CONFIG_M5445X
+ 	struct page *page, **map;
+ 	pgprot_t pgprot;
+ 	void *addr;
+@@ -75,7 +75,7 @@ void dma_free_coherent(struct device *de
+ 		       void *addr, dma_addr_t handle)
+ {
+ 	pr_debug("dma_free_coherent: %p, %x\n", addr, handle);
+-#ifndef CONFIG_M54455
++#ifndef CONFIG_M5445X
+ 	vfree(addr);
+ #else
+ 	kfree(addr);
+--- a/arch/m68k/kernel/setup.c
++++ b/arch/m68k/kernel/setup.c
+@@ -519,7 +519,7 @@ int get_hardware_list(char *buffer)
+ 
+ void check_bugs(void)
+ {
+-#if !defined(CONFIG_M68KFPU_EMU) && !defined(CONFIG_M54455)
++#if !defined(CONFIG_M68KFPU_EMU) && !defined(CONFIG_M5445X)
+ 	if (m68k_fputype == 0) {
+ 		printk(KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
+ 			"WHICH IS REQUIRED BY LINUX/M68K ***\n");
+--- a/arch/m68k/mm/kmap.c
++++ b/arch/m68k/mm/kmap.c
+@@ -133,7 +133,7 @@ void __iomem *__ioremap(unsigned long ph
+ 	}
+ #endif
+ 
+-#ifdef CONFIG_M54455
++#ifdef CONFIG_M5445X
+ 	if (physaddr >= 0xf0000000) {
+ 		/*
+ 	 	 * On the M5445x processors an ACR is setup to map
+--- a/drivers/crypto/Kconfig
++++ b/drivers/crypto/Kconfig
+@@ -62,15 +62,15 @@ config CRYPTO_DEV_GEODE
+ 
+ config CRYPTO_DEV_MCFCAU
+ 	bool "Support for Freescale Coldfire Cryptographic Acceleration Unit (CAU)"
+-	depends on M54455
++	depends on M5445X
+ 	select CRYPTO_ALGAPI
+ 	help
+ 	  The cryptographic acceleration unit (CAU) is a ColdFire coprocessor
+ 	  implementing a set of specialized operations in hardware. For example, you can
+-	  find it on MCF54455.
++	  find it on MCF5445X.
+ 
+ config CRYPTO_DEV_MCFCAU_DES
+-	tristate "DES and Triple DES cipher algorithms (MCF54455)"
++	tristate "DES and Triple DES cipher algorithms (MCF5445X)"
+ 	depends on CRYPTO_DEV_MCFCAU
+ 	select CRYPTO_ALGAPI
+ 	select CRYPTO_BLKCIPHER
+@@ -84,7 +84,7 @@ config CRYPTO_DEV_MCFCAU_DES
+ 	  will be called mcfcau-des.
+ 
+ config CRYPTO_DEV_MCFCAU_AES
+-	tristate "AES cipher algorithm (MCF54455)"
++	tristate "AES cipher algorithm (MCF5445X)"
+ 	depends on CRYPTO_DEV_MCFCAU
+ 	select CRYPTO_ALGAPI
+ 	select CRYPTO_BLKCIPHER
+@@ -98,7 +98,7 @@ config CRYPTO_DEV_MCFCAU_AES
+ 	  will be called mcfcau-aes.
+ 
+ config CRYPTO_DEV_MCFCAU_MD5
+-	tristate "MD5 digest algorithm (MCF54455)"
++	tristate "MD5 digest algorithm (MCF5445X)"
+ 	depends on CRYPTO_DEV_MCFCAU
+ 	select CRYPTO_ALGAPI
+ 	help
+@@ -111,7 +111,7 @@ config CRYPTO_DEV_MCFCAU_MD5
+ 	  will be called mcfcau-md5.
+ 
+ config CRYPTO_DEV_MCFCAU_SHA1
+-	tristate "SHA1 digest algorithm (MCF54455)"
++	tristate "SHA1 digest algorithm (MCF5445X)"
+ 	depends on CRYPTO_DEV_MCFCAU
+ 	select CRYPTO_ALGAPI
+ 	help
+--- a/drivers/crypto/mcfcau-aes.c
++++ b/drivers/crypto/mcfcau-aes.c
+@@ -5,7 +5,7 @@
+  * Author: Andrey Butok
+  * Copyright Freescale Semiconductor Inc.  2007
+  *
+- * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
++ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
+  *
+  * This program is free software; you can redistribute it and/or modify it
+  * under the terms of the GNU General Public License as published by the
+--- a/drivers/crypto/mcfcau-des.c
++++ b/drivers/crypto/mcfcau-des.c
+@@ -5,7 +5,7 @@
+  * Author: Andrey Butok
+  * Copyright Freescale Semiconductor Inc.  2007
+  *
+- * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
++ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
+  *
+  * This program is free software; you can redistribute it and/or modify it
+  * under the terms of the GNU General Public License as published by the
+--- a/drivers/crypto/mcfcau-md5.c
++++ b/drivers/crypto/mcfcau-md5.c
+@@ -5,7 +5,7 @@
+  * Author: Andrey Butok
+  * Copyright Freescale Semiconductor Inc.  2007
+  *
+- * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
++ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
+  *
+  * This program is free software; you can redistribute it and/or modify it
+  * under the terms of the GNU General Public License as published by the
+--- a/drivers/crypto/mcfcau-sha1.c
++++ b/drivers/crypto/mcfcau-sha1.c
+@@ -5,7 +5,7 @@
+  * Author: Andrey Butok
+  * Copyright Freescale Semiconductor Inc.  2007
+  *
+- * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
++ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
+  *
+  * This program is free software; you can redistribute it and/or modify it
+  * under the terms of the GNU General Public License as published by the
+--- a/drivers/crypto/mcfcau.c
++++ b/drivers/crypto/mcfcau.c
+@@ -5,7 +5,7 @@
+  * Author: Andrey Butok
+  * Copyright Freescale Semiconductor Inc.  2007
+  *
+- * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
++ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
+  *
+  * This program is free software; you can redistribute it and/or modify it
+  * under the terms of the GNU General Public License as published by the
+--- a/drivers/crypto/mcfcau.h
++++ b/drivers/crypto/mcfcau.h
+@@ -5,7 +5,7 @@
+  * Author: Andrey Butok
+  * Copyright Freescale Semiconductor Inc.  2007
+  *
+- * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
++ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
+  *
+  * This program is free software; you can redistribute it and/or modify it
+  * under the terms of the GNU General Public License as published by the
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -1975,7 +1975,7 @@ config 68360_ENET
+ 
+ config FEC
+ 	bool "FEC ethernet controller (of ColdFire CPUs)"
+-	depends on M523x || M527x || M5272 || M528x || M520x || M54455
++	depends on M523x || M527x || M5272 || M528x || M520x || M5445X
+ 	help
+ 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
+ 	  controller on some Motorola ColdFire processors.
+--- a/drivers/net/fec.c
++++ b/drivers/net/fec.c
+@@ -52,7 +52,7 @@
+ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
+     defined(CONFIG_M5272) || defined(CONFIG_M528x) || \
+     defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
+-    defined(CONFIG_M54455)
++    defined(CONFIG_M5445X)
+ 
+ #include <asm/coldfire.h>
+ #include <asm/mcfsim.h>
+@@ -84,7 +84,7 @@ static unsigned int fec_hw[] = {
+ 	(MCF_MBAR+0x30000),
+ #elif defined(CONFIG_M532x)
+ 	(MCF_MBAR+0xfc030000),
+-#elif defined(CONFIG_M54455)
++#elif defined(CONFIG_M5445X)
+ 	(MCF_MBAR+0xfc030000),
+ #if defined(CONFIG_FEC2)
+ 	(MCF_MBAR+0xfc034000),
+@@ -179,7 +179,7 @@ typedef struct {
+  * account when setting it.
+  */
+ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+-    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M54455)
++    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M5445X)
+ #define	OPT_FRAME_SIZE	(PKT_MAXBUF_SIZE << 16)
+ #else
+ #define	OPT_FRAME_SIZE	0
+@@ -1831,9 +1831,9 @@ static void __inline__ fec_uncache(unsig
+ 
+ /* ------------------------------------------------------------------------- */
+ 
+-#elif defined(CONFIG_M54455)
++#elif defined(CONFIG_M5445X)
+ /*
+- * Code specific for M54455
++ * Code specific for M5445X
+  */
+ 
+ static void __inline__ fec_request_intrs(struct net_device *dev)
+--- a/drivers/net/fec.h
++++ b/drivers/net/fec.h
+@@ -14,7 +14,7 @@
+ /****************************************************************************/
+ 
+ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+-    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M54455)
++    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M5445X)
+ /*
+  *	Just figures, Motorola would have to change the offsets for
+  *	registers in the same peripheral device on different models
+--- a/drivers/serial/mcfserial.c
++++ b/drivers/serial/mcfserial.c
+@@ -69,7 +69,7 @@ struct timer_list mcfrs_timer_struct;
+ #define	DEFAULT_CBAUD		B38400
+ #elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \
+       defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO) || \
+-      defined(CONFIG_M54455) || defined(CONFIG_M547X_8X)
++      defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X)
+ #define CONSOLE_BAUD_RATE 	115200
+ #define DEFAULT_CBAUD		B115200
+ #elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
+@@ -102,7 +102,7 @@ static struct tty_driver *mcfrs_serial_d
+ #undef SERIAL_DEBUG_FLOW
+ 
+ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+-    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M54455) || \
++    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M5445X) || \
+     defined(CONFIG_M547X_8X)
+ #define	IRQBASE	(MCFINT_VECBASE+MCFINT_UART0)
+ #else
+@@ -1630,7 +1630,7 @@ static void mcfrs_irqinit(struct mcf_ser
+ 		/* GPIOs also must be initalized, depends on board */
+ 		break;
+ 	}
+-#elif defined(CONFIG_M54455)
++#elif defined(CONFIG_M5445X)
+ 	volatile unsigned char *uartp;
+ 	uartp = info->addr;
+ 	switch (info->line) {
+@@ -2022,7 +2022,7 @@ struct console mcfrs_console = {
+ 
+ static int __init mcfrs_console_init(void)
+ {
+-#if !(defined(CONFIG_M54455) || defined(CONFIG_M547X_8X))
++#if !(defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X))
+ 	register_console(&mcfrs_console);
+ #endif
+ 	return 0;
+--- a/drivers/spi/coldfire_edma.c
++++ b/drivers/spi/coldfire_edma.c
+@@ -20,10 +20,10 @@
+ #include <linux/cdev.h>
+ #include <linux/seq_file.h>
+ #include <linux/proc_fs.h>
+-#ifdef CONFIG_M54455
++#ifdef CONFIG_M5445X
+ #include <asm/mcf5445x_edma.h>
+ #include <asm/mcf5445x_intc.h>
+-#endif /* CONFIG_M54455 */
++#endif /* CONFIG_M5445X */
+ #include <asm/coldfire_edma.h>
+ 
+ /*
+--- a/drivers/spi/spi_coldfire.c
++++ b/drivers/spi/spi_coldfire.c
+@@ -57,7 +57,7 @@
+ #include <asm/mcfqspi.h>
+ #include <asm/coldfire.h>
+ 
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ 	#include <asm/virtconvert.h>
+ 
+ 	#define SPI_DSPI
+--- a/drivers/spi/ssi_audio.c
++++ b/drivers/spi/ssi_audio.c
+@@ -25,7 +25,7 @@
+ 
+ #include <asm/coldfire.h>
+ #include <asm/coldfire_edma.h>
+-#ifdef CONFIG_M54455
++#ifdef CONFIG_M5445X
+ #include <asm/mcf5445x_ssi.h>
+ #include <asm/mcf5445x_ccm.h>
+ #include <asm/mcf5445x_gpio.h>
+--- a/include/asm-m68k/cfcache.h
++++ b/include/asm-m68k/cfcache.h
+@@ -40,7 +40,7 @@
+ #define CF_CACR_IDSP	    (0x00000080) /* Ins default supervisor-protect   */
+ #define CF_CACR_EUSP        (0x00000020) /* Switch stacks in user mode       */
+ 
+-#ifdef CONFIG_M54455
++#ifdef CONFIG_M5445X
+ /*
+  * M5445x Cache Configuration
+  *	- cache line size is 16 bytes
+--- a/include/asm-m68k/coldfire.h
++++ b/include/asm-m68k/coldfire.h
+@@ -1,9 +1,9 @@
+ #ifndef _COLDFIRE_H_
+ #define _COLDFIRE_H_
+ 
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ #define MCF_MBAR	0x0
+-#define MCF_RAMBAR1 	0x40000000
++#define MCF_RAMBAR1 	0x80000000
+ #define MCF_SRAM	0x80000000
+ #elif defined(CONFIG_M547X_8X)
+ #define MCF_MBAR	0xF0000000
+--- a/include/asm-m68k/coldfire_edma.h
++++ b/include/asm-m68k/coldfire_edma.h
+@@ -20,14 +20,14 @@
+ #define EDMA_DRIVER_NAME "ColdFire-eDMA"
+ #define DMA_DEV_MINOR 1
+ 
+-#ifdef CONFIG_M54455
++#ifdef CONFIG_M5445X
+ #define EDMA_INT_CHANNEL_BASE 		8
+ #define EDMA_INT_CONTROLLER_BASE 	64
+ #define EDMA_INT_BASE			(EDMA_INT_CHANNEL_BASE + \
+ 					 EDMA_INT_CONTROLLER_BASE)
+ #define EDMA_CHANNELS			16
+ #define EDMA_INT_ERR			16	/* edma error interrupt */
+-#endif /* CONFIG_M54455 */
++#endif /* CONFIG_M5445X */
+  
+ typedef irqreturn_t (*edma_irq_handler)(int, void *);
+ typedef void (*edma_error_handler)(int, void *);
+--- a/include/asm-m68k/mcfsim.h
++++ b/include/asm-m68k/mcfsim.h
+@@ -12,7 +12,7 @@
+ #include <asm/coldfire.h>
+ #endif
+ 
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ #include <asm/mcf5445x_intc.h>
+ #include <asm/mcf5445x_gpio.h>
+ #include <asm/mcf5445x_i2c.h>
+--- a/include/asm-m68k/mcfuart.h
++++ b/include/asm-m68k/mcfuart.h
+@@ -15,7 +15,7 @@
+  *	Define the base address of the UARTS within the MBAR address
+  *	space.
+  */
+-#if defined(CONFIG_M54455)
++#if defined(CONFIG_M5445X)
+ #include <asm/mcf5445x_intc.h>
+ #define MCFUART_BASE1		0xfc060000	/* Base address of UART1 */
+ #define MCFUART_BASE2		0xfc064000	/* Base address of UART2 */
+--- a/include/asm-m68k/page_offset.h
++++ b/include/asm-m68k/page_offset.h
+@@ -4,7 +4,7 @@
+ #if defined(CONFIG_SUN3)
+ #define PAGE_OFFSET_RAW		0x0E000000
+ 
+-#elif defined(CONFIG_M54455) || defined(CONFIG_M547X_8X)
++#elif defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X)
+ #define	PHYS_OFFSET		CONFIG_SDRAM_BASE
+ #define PAGE_OFFSET_RAW		(PHYS_OFFSET)
+ /* #define PAGE_OFFSET_RAW		0xC0000000 */
+--- a/include/asm-m68k/setup.h
++++ b/include/asm-m68k/setup.h
+@@ -240,7 +240,7 @@ extern unsigned long m68k_machtype;
+ #define FPU_68040      (1<<FPUB_68040)
+ #define FPU_68060      (1<<FPUB_68060)
+ #define FPU_SUNFPA     (1<<FPUB_SUNFPA)
+-#ifndef CONFIG_M54455
++#ifndef CONFIG_M5445X
+ #define FPU_CFV4E      (1<<FPUB_CFV4E)
+ #else
+ #define FPU_CFV4E      0
diff --git a/target/linux/coldfire/patches/062-mcfv4e_cache_split.patch b/target/linux/coldfire/patches/062-mcfv4e_cache_split.patch
new file mode 100644
index 0000000000..a98c334b6d
--- /dev/null
+++ b/target/linux/coldfire/patches/062-mcfv4e_cache_split.patch
@@ -0,0 +1,979 @@
+From 940b4fea5ebfde3abe03c6469a57c01ee961497a Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 18 Jun 2008 15:20:21 -0600
+Subject: [PATCH] Split 547x/548x and 5445x cache routines into separate files.
+
+LTIBName: mcfv4e-cache-split
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ include/asm-m68k/cf_5445x_cacheflush.h |  447 ++++++++++++++++++++++++++++++++
+ include/asm-m68k/cf_548x_cacheflush.h  |  259 ++++++++++++++++++
+ include/asm-m68k/cf_cacheflush.h       |  244 +-----------------
+ 3 files changed, 711 insertions(+), 239 deletions(-)
+ create mode 100644 include/asm-m68k/cf_5445x_cacheflush.h
+ create mode 100644 include/asm-m68k/cf_548x_cacheflush.h
+
+--- /dev/null
++++ b/include/asm-m68k/cf_5445x_cacheflush.h
+@@ -0,0 +1,447 @@
++/*
++ * include/asm-m68k/cf_5445x_cacheflush.h - Coldfire 5445x Cache
++ *
++ * Based on include/asm-m68k/cacheflush.h
++ *
++ * Coldfire pieces by:
++ *   Kurt Mahan kmahan@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007, 2008
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++#ifndef M68K_CF_5445x_CACHEFLUSH_H
++#define M68K_CF_5445x_CACHEFLUSH_H
++
++#include <asm/cfcache.h>
++
++/*
++ * Coldfire Cache Model
++ *
++ * The Coldfire processors use a Harvard architecture cache configured
++ * as four-way set associative.  The cache does not implement bus snooping
++ * so cache coherency with other masters must be maintained in software.
++ *
++ * The cache is managed via the CPUSHL instruction in conjunction with
++ * bits set in the CACR (cache control register).  Currently the code
++ * uses the CPUSHL enhancement which adds the ability to
++ * invalidate/clear/push a cacheline by physical address.  This feature
++ * is designated in the Hardware Configuration Register [D1-CPES].
++ *
++ * CACR Bits:
++ *	DPI[28]		cpushl invalidate disable for d-cache
++ *	IDPI[12]	cpushl invalidate disable for i-cache
++ *	SPA[14]		cpushl search by physical address
++ *	IVO[20]		cpushl invalidate only
++ *
++ * Random Terminology:
++ *  * invalidate = reset the cache line's valid bit
++ *  * push = generate a line-sized store of the data if its contents are marked
++ *	     as modifed (the modified flag is cleared after the store)
++ *  * clear = push + invalidate
++ */
++
++/**
++ * flush_icache - Flush all of the instruction cache
++ */
++static inline void flush_icache(void)
++{
++	asm volatile("nop\n"
++		     "moveq%.l	#0,%%d0\n"
++		     "moveq%.l	#0,%%d1\n"
++		     "move%.l	%%d0,%%a0\n"
++		     "1:\n"
++		     "cpushl	%%ic,(%%a0)\n"
++		     "add%.l	#0x0010,%%a0\n"
++		     "addq%.l	#1,%%d1\n"
++		     "cmpi%.l	%0,%%d1\n"
++		     "bne	1b\n"
++		     "moveq%.l	#0,%%d1\n"
++		     "addq%.l	#1,%%d0\n"
++		     "move%.l	%%d0,%%a0\n"
++		     "cmpi%.l	#4,%%d0\n"
++		     "bne	1b\n"
++		     : : "i" (CACHE_SETS)
++		     : "a0", "d0", "d1");
++}
++
++/**
++ * flush_dcache - Flush all of the data cache
++ */
++static inline void flush_dcache(void)
++{
++	asm volatile("nop\n"
++		     "moveq%.l	#0,%%d0\n"
++		     "moveq%.l	#0,%%d1\n"
++		     "move%.l	%%d0,%%a0\n"
++		     "1:\n"
++		     "cpushl	%%dc,(%%a0)\n"
++		     "add%.l	#0x0010,%%a0\n"
++		     "addq%.l	#1,%%d1\n"
++		     "cmpi%.l	%0,%%d1\n"
++		     "bne	1b\n"
++		     "moveq%.l	#0,%%d1\n"
++		     "addq%.l	#1,%%d0\n"
++		     "move%.l	%%d0,%%a0\n"
++		     "cmpi%.l	#4,%%d0\n"
++		     "bne	1b\n"
++		     : : "i" (CACHE_SETS)
++		     : "a0", "d0", "d1");
++}
++
++/**
++ * flush_bcache - Flush all of both caches
++ */
++static inline void flush_bcache(void)
++{
++	asm volatile("nop\n"
++		     "moveq%.l	#0,%%d0\n"
++		     "moveq%.l	#0,%%d1\n"
++		     "move%.l	%%d0,%%a0\n"
++		     "1:\n"
++		     "cpushl	%%bc,(%%a0)\n"
++		     "add%.l	#0x0010,%%a0\n"
++		     "addq%.l	#1,%%d1\n"
++		     "cmpi%.l	%0,%%d1\n"
++		     "bne	1b\n"
++		     "moveq%.l	#0,%%d1\n"
++		     "addq%.l	#1,%%d0\n"
++		     "move%.l	%%d0,%%a0\n"
++		     "cmpi%.l	#4,%%d0\n"
++		     "bne	1b\n"
++		     : : "i" (CACHE_SETS)
++		     : "a0", "d0", "d1");
++}
++
++/**
++ * cf_cache_clear - invalidate cache
++ * @paddr: starting physical address
++ * @len: number of bytes
++ *
++ * Invalidate cache lines starting at paddr for len bytes.
++ * Those lines are not pushed.
++ */
++static inline void cf_cache_clear(unsigned long paddr, int len)
++{
++	/* number of lines */
++	len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
++	if (len == 0)
++		return;
++
++	/* align on set boundary */
++	paddr &= 0xfffffff0;
++
++	asm volatile("nop\n"
++		     "move%.l   %2,%%d0\n"
++		     "or%.l	%3,%%d0\n"
++		     "movec	%%d0,%%cacr\n"
++		     "move%.l	%0,%%a0\n"
++		     "move%.l	%1,%%d0\n"
++		     "1:\n"
++		     "cpushl	%%bc,(%%a0)\n"
++		     "lea	0x10(%%a0),%%a0\n"
++		     "subq%.l	#1,%%d0\n"
++		     "bne%.b	1b\n"
++		     "movec	%2,%%cacr\n"
++		     : : "a" (paddr), "r" (len),
++			 "r" (shadow_cacr),
++			 "i" (CF_CACR_SPA+CF_CACR_IVO)
++		     : "a0", "d0");
++}
++
++/**
++ * cf_cache_push - Push dirty cache out with no invalidate
++ * @paddr: starting physical address
++ * @len: number of bytes
++ *
++ * Push the any dirty lines starting at paddr for len bytes.
++ * Those lines are not invalidated.
++ */
++static inline void cf_cache_push(unsigned long paddr, int len)
++{
++	/* number of lines */
++	len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
++	if (len == 0)
++		return;
++
++	/* align on set boundary */
++	paddr &= 0xfffffff0;
++
++	asm volatile("nop\n"
++		     "move%.l   %2,%%d0\n"
++		     "or%.l	%3,%%d0\n"
++		     "movec	%%d0,%%cacr\n"
++		     "move%.l	%0,%%a0\n"
++		     "move%.l	%1,%%d0\n"
++		     "1:\n"
++		     "cpushl	%%bc,(%%a0)\n"
++		     "lea	0x10(%%a0),%%a0\n"
++		     "subq%.l	#1,%%d0\n"
++		     "bne.b	1b\n"
++		     "movec	%2,%%cacr\n"
++		     : : "a" (paddr), "r" (len),
++			 "r" (shadow_cacr),
++			 "i" (CF_CACR_SPA+CF_CACR_DPI+CF_CACR_IDPI)
++		     : "a0", "d0");
++}
++
++/**
++ * cf_cache_flush - Push dirty cache out and invalidate
++ * @paddr: starting physical address
++ * @len: number of bytes
++ *
++ * Push the any dirty lines starting at paddr for len bytes and
++ * invalidate those lines.
++ */
++static inline void cf_cache_flush(unsigned long paddr, int len)
++{
++	/* number of lines */
++	len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE;
++	if (len == 0)
++		return;
++
++	/* align on set boundary */
++	paddr &= 0xfffffff0;
++
++	asm volatile("nop\n"
++		     "move%.l   %2,%%d0\n"
++		     "or%.l	%3,%%d0\n"
++		     "movec	%%d0,%%cacr\n"
++		     "move%.l	%0,%%a0\n"
++		     "move%.l	%1,%%d0\n"
++		     "1:\n"
++		     "cpushl	%%bc,(%%a0)\n"
++		     "lea	0x10(%%a0),%%a0\n"
++		     "subq%.l	#1,%%d0\n"
++		     "bne.b	1b\n"
++		     "movec	%2,%%cacr\n"
++		     : : "a" (paddr), "r" (len),
++			 "r" (shadow_cacr),
++			 "i" (CF_CACR_SPA)
++		     : "a0", "d0");
++}
++
++/**
++ * cf_cache_flush_range - Push dirty data/inst cache in range out and invalidate
++ * @vstart - starting virtual address
++ * @vend: ending virtual address
++ *
++ * Push the any dirty data/instr lines starting at paddr for len bytes and
++ * invalidate those lines.
++ */
++static inline void cf_cache_flush_range(unsigned long vstart, unsigned long vend)
++{
++	int len;
++
++	/* align on set boundary */
++	vstart &= 0xfffffff0;
++	vend = PAGE_ALIGN((vend + (CACHE_LINE_SIZE-1))) & 0xfffffff0;
++	len = vend - vstart;
++	if (len == 0)
++		return;
++	vstart = __pa(vstart);
++	vend = vstart + len;
++
++	asm volatile("nop\n"
++		     "move%.l   %2,%%d0\n"
++		     "or%.l	%3,%%d0\n"
++		     "movec	%%d0,%%cacr\n"
++		     "move%.l	%0,%%a0\n"
++		     "move%.l	%1,%%a1\n"
++		     "1:\n"
++		     "cpushl	%%bc,(%%a0)\n"
++		     "lea	0x10(%%a0),%%a0\n"
++		     "cmpa%.l	%%a0,%%a1\n"
++		     "bne.b	1b\n"
++		     "movec	%2,%%cacr\n"
++		     : /* no return */
++		     : "a" (vstart), "a" (vend),
++		       "r" (shadow_cacr),
++		       "i" (CF_CACR_SPA)
++		     : "a0", "a1", "d0");
++}
++
++/**
++ * cf_dcache_flush_range - Push dirty data cache in range out and invalidate
++ * @vstart - starting virtual address
++ * @vend: ending virtual address
++ *
++ * Push the any dirty data lines starting at paddr for len bytes and
++ * invalidate those lines.
++ */
++static inline void cf_dcache_flush_range(unsigned long vstart, unsigned long vend)
++{
++	/* align on set boundary */
++	vstart &= 0xfffffff0;
++	vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
++
++	asm volatile("nop\n"
++		     "move%.l   %2,%%d0\n"
++		     "or%.l	%3,%%d0\n"
++		     "movec	%%d0,%%cacr\n"
++		     "move%.l	%0,%%a0\n"
++		     "move%.l	%1,%%a1\n"
++		     "1:\n"
++		     "cpushl	%%dc,(%%a0)\n"
++		     "lea	0x10(%%a0),%%a0\n"
++		     "cmpa%.l	%%a0,%%a1\n"
++		     "bne.b	1b\n"
++		     "movec	%2,%%cacr\n"
++		     : /* no return */
++		     : "a" (__pa(vstart)), "a" (__pa(vend)),
++		       "r" (shadow_cacr),
++		       "i" (CF_CACR_SPA)
++		     : "a0", "a1", "d0");
++}
++
++/**
++ * cf_icache_flush_range - Push dirty inst cache in range out and invalidate
++ * @vstart - starting virtual address
++ * @vend: ending virtual address
++ *
++ * Push the any dirty instr lines starting at paddr for len bytes and
++ * invalidate those lines.  This should just be an invalidate since you
++ * shouldn't be able to have dirty instruction cache.
++ */
++static inline void cf_icache_flush_range(unsigned long vstart, unsigned long vend)
++{
++	/* align on set boundary */
++	vstart &= 0xfffffff0;
++	vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0;
++
++	asm volatile("nop\n"
++		     "move%.l   %2,%%d0\n"
++		     "or%.l	%3,%%d0\n"
++		     "movec	%%d0,%%cacr\n"
++		     "move%.l	%0,%%a0\n"
++		     "move%.l	%1,%%a1\n"
++		     "1:\n"
++		     "cpushl	%%ic,(%%a0)\n"
++		     "lea	0x10(%%a0),%%a0\n"
++		     "cmpa%.l	%%a0,%%a1\n"
++		     "bne.b	1b\n"
++		     "movec	%2,%%cacr\n"
++		     : /* no return */
++		     : "a" (__pa(vstart)), "a" (__pa(vend)),
++		       "r" (shadow_cacr),
++		       "i" (CF_CACR_SPA)
++		     : "a0", "a1", "d0");
++}
++
++/**
++ * flush_cache_mm - Flush an mm_struct
++ * @mm: mm_struct to flush
++ */
++static inline void flush_cache_mm(struct mm_struct *mm)
++{
++	if (mm == current->mm)
++		flush_bcache();
++}
++
++#define flush_cache_dup_mm(mm)	flush_cache_mm(mm)
++
++/**
++ * flush_cache_range - Flush a cache range
++ * @vma: vma struct
++ * @start: Starting address
++ * @end: Ending address
++ *
++ * flush_cache_range must be a macro to avoid a dependency on
++ * linux/mm.h which includes this file.
++ */
++static inline void flush_cache_range(struct vm_area_struct *vma,
++	unsigned long start, unsigned long end)
++{
++	if (vma->vm_mm == current->mm)
++		cf_cache_flush_range(start, end);
++}
++
++/**
++ * flush_cache_page - Flush a page of the cache
++ * @vma: vma struct
++ * @vmaddr:
++ * @pfn: page numer
++ *
++ * flush_cache_page must be a macro to avoid a dependency on
++ * linux/mm.h which includes this file.
++ */
++static inline void flush_cache_page(struct vm_area_struct *vma,
++	unsigned long vmaddr, unsigned long pfn)
++{
++	if (vma->vm_mm == current->mm)
++		cf_cache_flush_range(vmaddr, vmaddr+PAGE_SIZE);
++}
++
++/**
++ * __flush_page_to_ram - Push a page out of the cache
++ * @vaddr: Virtual address at start of page
++ *
++ * Push the page at kernel virtual address *vaddr* and clear
++ * the icache.
++ */
++static inline void __flush_page_to_ram(void *vaddr)
++{
++	asm volatile("nop\n"
++		     "move%.l   %2,%%d0\n"
++		     "or%.l	%3,%%d0\n"
++		     "movec	%%d0,%%cacr\n"
++		     "move%.l	%0,%%d0\n"
++		     "and%.l	#0xfffffff0,%%d0\n"
++		     "move%.l	%%d0,%%a0\n"
++		     "move%.l	%1,%%d0\n"
++		     "1:\n"
++		     "cpushl	%%bc,(%%a0)\n"
++		     "lea	0x10(%%a0),%%a0\n"
++		     "subq%.l	#1,%%d0\n"
++		     "bne.b	1b\n"
++		     "movec	%2,%%cacr\n"
++		     : : "a" (__pa(vaddr)), "i" (PAGE_SIZE / CACHE_LINE_SIZE),
++			 "r" (shadow_cacr), "i" (CF_CACR_SPA)
++		     : "a0", "d0");
++}
++
++/*
++ * Various defines for the kernel.
++ */
++
++extern void cache_clear(unsigned long paddr, int len);
++extern void cache_push(unsigned long paddr, int len);
++extern void flush_icache_range(unsigned long address, unsigned long endaddr);
++
++#define flush_cache_all()			flush_bcache()
++#define flush_cache_vmap(start, end)		flush_bcache()
++#define flush_cache_vunmap(start, end)		flush_bcache()
++
++#define flush_dcache_range(vstart, vend)	cf_dcache_flush_range(vstart, vend)
++#define flush_dcache_page(page)			__flush_page_to_ram(page_address(page))
++#define flush_dcache_mmap_lock(mapping)		do { } while (0)
++#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
++
++#define flush_icache_page(vma, page)		__flush_page_to_ram(page_address(page))
++
++/**
++ * copy_to_user_page - Copy memory to user page
++ */
++static inline void copy_to_user_page(struct vm_area_struct *vma,
++				     struct page *page, unsigned long vaddr,
++				     void *dst, void *src, int len)
++{
++	memcpy(dst, src, len);
++	cf_cache_flush(page_to_phys(page), PAGE_SIZE);
++}
++
++/**
++ * copy_from_user_page - Copy memory from user page
++ */
++static inline void copy_from_user_page(struct vm_area_struct *vma,
++				       struct page *page, unsigned long vaddr,
++				       void *dst, void *src, int len)
++{
++	cf_cache_flush(page_to_phys(page), PAGE_SIZE);
++	memcpy(dst, src, len);
++}
++
++#endif /* M68K_CF_5445x_CACHEFLUSH_H */
+--- /dev/null
++++ b/include/asm-m68k/cf_548x_cacheflush.h
+@@ -0,0 +1,259 @@
++/*
++ * include/asm-m68k/cf_548x_cacheflush.h - Coldfire 547x/548x Cache
++ *
++ * Based on include/asm-m68k/cacheflush.h
++ *
++ * Coldfire pieces by:
++ *   Kurt Mahan kmahan@freescale.com
++ *
++ * Copyright Freescale Semiconductor, Inc. 2007, 2008
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++#ifndef M68K_CF_548x_CACHEFLUSH_H
++#define M68K_CF_548x_CACHEFLUSH_H
++
++#include <asm/cfcache.h>
++/*
++ * Cache handling functions
++ */
++
++#define flush_icache()						\
++({								\
++  unsigned long set;						\
++  unsigned long start_set;					\
++  unsigned long end_set;					\
++								\
++  start_set = 0;						\
++  end_set = (unsigned long)LAST_DCACHE_ADDR;			\
++    								\
++  for (set = start_set; set <= end_set; set += (0x10 - 3)) {	\
++    asm volatile("cpushl %%ic,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%ic,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%ic,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set));		\
++  }								\
++})
++
++#define flush_dcache()						\
++({								\
++  unsigned long set;						\
++  unsigned long start_set;					\
++  unsigned long end_set;					\
++								\
++  start_set = 0;						\
++  end_set = (unsigned long)LAST_DCACHE_ADDR;			\
++    								\
++  for (set = start_set; set <= end_set; set += (0x10 - 3)) {	\
++    asm volatile("cpushl %%dc,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%dc,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%dc,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%dc,(%0)" : "=a" (set) : "a" (set));		\
++  }								\
++})
++
++#define flush_bcache()						\
++({								\
++  unsigned long set;						\
++  unsigned long start_set;					\
++  unsigned long end_set;					\
++								\
++  start_set = 0;						\
++  end_set = (unsigned long)LAST_DCACHE_ADDR;			\
++    								\
++  for (set = start_set; set <= end_set; set += (0x10 - 3)) {	\
++    asm volatile("cpushl %%bc,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%bc,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%bc,(%0)\n"				\
++                 "\taddq%.l #1,%0\n"				\
++                 "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set));		\
++  }								\
++})
++
++/*
++ * invalidate the cache for the specified memory range.
++ * It starts at the physical address specified for
++ * the given number of bytes.
++ */
++extern void cache_clear(unsigned long paddr, int len);
++/*
++ * push any dirty cache in the specified memory range.
++ * It starts at the physical address specified for
++ * the given number of bytes.
++ */
++extern void cache_push(unsigned long paddr, int len);
++
++/*
++ * push and invalidate pages in the specified user virtual
++ * memory range.
++ */
++extern void cache_push_v(unsigned long vaddr, int len);
++
++/* This is needed whenever the virtual mapping of the current
++   process changes.  */
++
++/**
++ * flush_cache_mm - Flush an mm_struct
++ * @mm: mm_struct to flush
++ */
++static inline void flush_cache_mm(struct mm_struct *mm)
++{
++	if (mm == current->mm)
++		flush_bcache();
++}
++
++#define flush_cache_dup_mm(mm)	flush_cache_mm(mm)
++
++#define flush_cache_all()		flush_bcache()
++
++/**
++ * flush_cache_range - Flush a cache range
++ * @vma: vma struct
++ * @start: Starting address
++ * @end: Ending address
++ *
++ * flush_cache_range must be a macro to avoid a dependency on
++ * linux/mm.h which includes this file.
++ */
++static inline void flush_cache_range(struct vm_area_struct *vma,
++	unsigned long start, unsigned long end)
++{
++	if (vma->vm_mm == current->mm)
++		flush_bcache();
++//		cf_cache_flush_range(start, end);
++}
++
++/**
++ * flush_cache_page - Flush a page of the cache
++ * @vma: vma struct
++ * @vmaddr:
++ * @pfn: page numer
++ *
++ * flush_cache_page must be a macro to avoid a dependency on
++ * linux/mm.h which includes this file.
++ */
++static inline void flush_cache_page(struct vm_area_struct *vma,
++	unsigned long vmaddr, unsigned long pfn)
++{
++	if (vma->vm_mm == current->mm)
++		flush_bcache();
++//		cf_cache_flush_range(vmaddr, vmaddr+PAGE_SIZE);
++}
++
++/* Push the page at kernel virtual address and clear the icache */
++/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
++#define flush_page_to_ram(page) __flush_page_to_ram((void *) page_address(page))
++extern inline void __flush_page_to_ram(void *address)
++{
++  unsigned long set;
++  unsigned long start_set;
++  unsigned long end_set;
++  unsigned long addr = (unsigned long) address;
++
++  addr &= ~(PAGE_SIZE - 1); /* round down to page start address */
++
++  start_set = addr & _ICACHE_SET_MASK;
++  end_set = (addr + PAGE_SIZE-1) & _ICACHE_SET_MASK;
++
++  if (start_set > end_set) {
++    /* from the begining to the lowest address */
++    for (set = 0; set <= end_set; set += (0x10 - 3)) {
++      asm volatile("cpushl %%bc,(%0)\n"
++                   "\taddq%.l #1,%0\n"
++                   "\tcpushl %%bc,(%0)\n"
++                   "\taddq%.l #1,%0\n"
++                   "\tcpushl %%bc,(%0)\n"
++                   "\taddq%.l #1,%0\n"
++                   "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set));
++    }
++    /* next loop will finish the cache ie pass the hole */
++    end_set = LAST_ICACHE_ADDR;    
++  }
++  for (set = start_set; set <= end_set; set += (0x10 - 3)) {
++    asm volatile("cpushl %%bc,(%0)\n"
++                 "\taddq%.l #1,%0\n"
++                 "\tcpushl %%bc,(%0)\n"
++                 "\taddq%.l #1,%0\n"
++                 "\tcpushl %%bc,(%0)\n"
++                 "\taddq%.l #1,%0\n"
++                 "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set));
++  }
++}
++
++/* Use __flush_page_to_ram() for flush_dcache_page all values are same - MW */
++#define flush_dcache_page(page)			\
++	__flush_page_to_ram((void *) page_address(page))
++#define flush_icache_page(vma,pg)		\
++	__flush_page_to_ram((void *) page_address(pg))
++#define flush_icache_user_range(adr,len)	do { } while (0)
++/* NL */
++#define flush_icache_user_page(vma,page,addr,len)	do { } while (0)
++
++/* Push n pages at kernel virtual address and clear the icache */
++/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
++extern inline void flush_icache_range (unsigned long address,
++				       unsigned long endaddr)
++{
++  unsigned long set;
++  unsigned long start_set;
++  unsigned long end_set;
++
++  start_set = address & _ICACHE_SET_MASK;
++  end_set = endaddr & _ICACHE_SET_MASK;
++
++  if (start_set > end_set) {
++    /* from the begining to the lowest address */
++    for (set = 0; set <= end_set; set += (0x10 - 3)) {
++      asm volatile("cpushl %%ic,(%0)\n"
++                   "\taddq%.l #1,%0\n"
++                   "\tcpushl %%ic,(%0)\n"
++                   "\taddq%.l #1,%0\n"
++                   "\tcpushl %%ic,(%0)\n"
++                   "\taddq%.l #1,%0\n"
++                   "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set));
++    }
++    /* next loop will finish the cache ie pass the hole */
++    end_set = LAST_ICACHE_ADDR;    
++  }
++  for (set = start_set; set <= end_set; set += (0x10 - 3)) {
++    asm volatile("cpushl %%ic,(%0)\n"
++                 "\taddq%.l #1,%0\n"
++                 "\tcpushl %%ic,(%0)\n"
++                 "\taddq%.l #1,%0\n"
++                 "\tcpushl %%ic,(%0)\n"
++                 "\taddq%.l #1,%0\n"
++                 "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set));
++  }
++}
++
++static inline void copy_to_user_page(struct vm_area_struct *vma,
++				     struct page *page, unsigned long vaddr,
++				     void *dst, void *src, int len)
++{
++	memcpy(dst, src, len);
++	flush_icache_user_page(vma, page, vaddr, len);
++}
++static inline void copy_from_user_page(struct vm_area_struct *vma,
++				       struct page *page, unsigned long vaddr,
++				       void *dst, void *src, int len)
++{
++	memcpy(dst, src, len);
++}
++
++#define flush_cache_vmap(start, end)		flush_cache_all()
++#define flush_cache_vunmap(start, end)		flush_cache_all()
++#define flush_dcache_mmap_lock(mapping)		do { } while (0)
++#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
++
++#endif /* M68K_CF_548x_CACHEFLUSH_H */
+--- a/include/asm-m68k/cf_cacheflush.h
++++ b/include/asm-m68k/cf_cacheflush.h
+@@ -1,244 +1,10 @@
+ #ifndef M68K_CF_CACHEFLUSH_H
+ #define M68K_CF_CACHEFLUSH_H
+ 
+-#include <asm/cfcache.h>
+-/*
+- * Cache handling functions
+- */
+-
+-#define flush_icache()						\
+-({								\
+-  unsigned long set;						\
+-  unsigned long start_set;					\
+-  unsigned long end_set;					\
+-								\
+-  start_set = 0;						\
+-  end_set = (unsigned long)LAST_DCACHE_ADDR;			\
+-    								\
+-  for (set = start_set; set <= end_set; set += (0x10 - 3)) {	\
+-    asm volatile("cpushl %%ic,(%0)\n"				\
+-                 "\taddq%.l #1,%0\n"				\
+-                 "\tcpushl %%ic,(%0)\n"				\
+-                 "\taddq%.l #1,%0\n"				\
+-                 "\tcpushl %%ic,(%0)\n"				\
+-                 "\taddq%.l #1,%0\n"				\
+-                 "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set));		\
+-  }								\
+-})
+-
+-#define flush_dcache()						\
+-({								\
+-  unsigned long set;						\
+-  unsigned long start_set;					\
+-  unsigned long end_set;					\
+-								\
+-  start_set = 0;						\
+-  end_set = (unsigned long)LAST_DCACHE_ADDR;			\
+-    								\
+-  for (set = start_set; set <= end_set; set += (0x10 - 3)) {	\
+-    asm volatile("cpushl %%dc,(%0)\n"				\
+-                 "\taddq%.l #1,%0\n"				\
+-                 "\tcpushl %%dc,(%0)\n"				\
+-                 "\taddq%.l #1,%0\n"				\
+-                 "\tcpushl %%dc,(%0)\n"				\
+-                 "\taddq%.l #1,%0\n"				\
+-                 "\tcpushl %%dc,(%0)" : "=a" (set) : "a" (set));		\
+-  }								\
+-})
+-
+-#define flush_bcache()						\
+-({								\
+-  unsigned long set;						\
+-  unsigned long start_set;					\
+-  unsigned long end_set;					\
+-								\
+-  start_set = 0;						\
+-  end_set = (unsigned long)LAST_DCACHE_ADDR;			\
+-    								\
+-  for (set = start_set; set <= end_set; set += (0x10 - 3)) {	\
+-    asm volatile("cpushl %%bc,(%0)\n"				\
+-                 "\taddq%.l #1,%0\n"				\
+-                 "\tcpushl %%bc,(%0)\n"				\
+-                 "\taddq%.l #1,%0\n"				\
+-                 "\tcpushl %%bc,(%0)\n"				\
+-                 "\taddq%.l #1,%0\n"				\
+-                 "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set));		\
+-  }								\
+-})
+-
+-/*
+- * invalidate the cache for the specified memory range.
+- * It starts at the physical address specified for
+- * the given number of bytes.
+- */
+-extern void cache_clear(unsigned long paddr, int len);
+-/*
+- * push any dirty cache in the specified memory range.
+- * It starts at the physical address specified for
+- * the given number of bytes.
+- */
+-extern void cache_push(unsigned long paddr, int len);
+-
+-/*
+- * push and invalidate pages in the specified user virtual
+- * memory range.
+- */
+-extern void cache_push_v(unsigned long vaddr, int len);
+-
+-/* This is needed whenever the virtual mapping of the current
+-   process changes.  */
+-
+-/**
+- * flush_cache_mm - Flush an mm_struct
+- * @mm: mm_struct to flush
+- */
+-static inline void flush_cache_mm(struct mm_struct *mm)
+-{
+-	if (mm == current->mm)
+-		flush_bcache();
+-}
+-
+-#define flush_cache_dup_mm(mm)	flush_cache_mm(mm)
+-
+-#define flush_cache_all()		flush_bcache()
+-
+-/**
+- * flush_cache_range - Flush a cache range
+- * @vma: vma struct
+- * @start: Starting address
+- * @end: Ending address
+- *
+- * flush_cache_range must be a macro to avoid a dependency on
+- * linux/mm.h which includes this file.
+- */
+-static inline void flush_cache_range(struct vm_area_struct *vma,
+-	unsigned long start, unsigned long end)
+-{
+-	if (vma->vm_mm == current->mm)
+-		flush_bcache();
+-//		cf_cache_flush_range(start, end);
+-}
+-
+-/**
+- * flush_cache_page - Flush a page of the cache
+- * @vma: vma struct
+- * @vmaddr:
+- * @pfn: page numer
+- *
+- * flush_cache_page must be a macro to avoid a dependency on
+- * linux/mm.h which includes this file.
+- */
+-static inline void flush_cache_page(struct vm_area_struct *vma,
+-	unsigned long vmaddr, unsigned long pfn)
+-{
+-	if (vma->vm_mm == current->mm)
+-		flush_bcache();
+-//		cf_cache_flush_range(vmaddr, vmaddr+PAGE_SIZE);
+-}
+-
+-/* Push the page at kernel virtual address and clear the icache */
+-/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
+-#define flush_page_to_ram(page) __flush_page_to_ram((void *) page_address(page))
+-extern inline void __flush_page_to_ram(void *address)
+-{
+-  unsigned long set;
+-  unsigned long start_set;
+-  unsigned long end_set;
+-  unsigned long addr = (unsigned long) address;
+-
+-  addr &= ~(PAGE_SIZE - 1); /* round down to page start address */
+-
+-  start_set = addr & _ICACHE_SET_MASK;
+-  end_set = (addr + PAGE_SIZE-1) & _ICACHE_SET_MASK;
+-
+-  if (start_set > end_set) {
+-    /* from the begining to the lowest address */
+-    for (set = 0; set <= end_set; set += (0x10 - 3)) {
+-      asm volatile("cpushl %%bc,(%0)\n"
+-                   "\taddq%.l #1,%0\n"
+-                   "\tcpushl %%bc,(%0)\n"
+-                   "\taddq%.l #1,%0\n"
+-                   "\tcpushl %%bc,(%0)\n"
+-                   "\taddq%.l #1,%0\n"
+-                   "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set));
+-    }
+-    /* next loop will finish the cache ie pass the hole */
+-    end_set = LAST_ICACHE_ADDR;    
+-  }
+-  for (set = start_set; set <= end_set; set += (0x10 - 3)) {
+-    asm volatile("cpushl %%bc,(%0)\n"
+-                 "\taddq%.l #1,%0\n"
+-                 "\tcpushl %%bc,(%0)\n"
+-                 "\taddq%.l #1,%0\n"
+-                 "\tcpushl %%bc,(%0)\n"
+-                 "\taddq%.l #1,%0\n"
+-                 "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set));
+-  }
+-}
+-
+-/* Use __flush_page_to_ram() for flush_dcache_page all values are same - MW */
+-#define flush_dcache_page(page)			\
+-	__flush_page_to_ram((void *) page_address(page))
+-#define flush_icache_page(vma,pg)		\
+-	__flush_page_to_ram((void *) page_address(pg))
+-#define flush_icache_user_range(adr,len)	do { } while (0)
+-/* NL */
+-#define flush_icache_user_page(vma,page,addr,len)	do { } while (0)
+-
+-/* Push n pages at kernel virtual address and clear the icache */
+-/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
+-extern inline void flush_icache_range (unsigned long address,
+-				       unsigned long endaddr)
+-{
+-  unsigned long set;
+-  unsigned long start_set;
+-  unsigned long end_set;
+-
+-  start_set = address & _ICACHE_SET_MASK;
+-  end_set = endaddr & _ICACHE_SET_MASK;
+-
+-  if (start_set > end_set) {
+-    /* from the begining to the lowest address */
+-    for (set = 0; set <= end_set; set += (0x10 - 3)) {
+-      asm volatile("cpushl %%ic,(%0)\n"
+-                   "\taddq%.l #1,%0\n"
+-                   "\tcpushl %%ic,(%0)\n"
+-                   "\taddq%.l #1,%0\n"
+-                   "\tcpushl %%ic,(%0)\n"
+-                   "\taddq%.l #1,%0\n"
+-                   "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set));
+-    }
+-    /* next loop will finish the cache ie pass the hole */
+-    end_set = LAST_ICACHE_ADDR;    
+-  }
+-  for (set = start_set; set <= end_set; set += (0x10 - 3)) {
+-    asm volatile("cpushl %%ic,(%0)\n"
+-                 "\taddq%.l #1,%0\n"
+-                 "\tcpushl %%ic,(%0)\n"
+-                 "\taddq%.l #1,%0\n"
+-                 "\tcpushl %%ic,(%0)\n"
+-                 "\taddq%.l #1,%0\n"
+-                 "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set));
+-  }
+-}
+-
+-static inline void copy_to_user_page(struct vm_area_struct *vma,
+-				     struct page *page, unsigned long vaddr,
+-				     void *dst, void *src, int len)
+-{
+-	memcpy(dst, src, len);
+-	flush_icache_user_page(vma, page, vaddr, len);
+-}
+-static inline void copy_from_user_page(struct vm_area_struct *vma,
+-				       struct page *page, unsigned long vaddr,
+-				       void *dst, void *src, int len)
+-{
+-	memcpy(dst, src, len);
+-}
+-
+-#define flush_cache_vmap(start, end)		flush_cache_all()
+-#define flush_cache_vunmap(start, end)		flush_cache_all()
+-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
++#ifdef CONFIG_M5445X
++#include "cf_5445x_cacheflush.h"
++#else
++#include "cf_548x_cacheflush.h"
++#endif
+ 
+ #endif /* M68K_CF_CACHEFLUSH_H */
diff --git a/target/linux/coldfire/patches/063-m5445x_rambar_config.patch b/target/linux/coldfire/patches/063-m5445x_rambar_config.patch
new file mode 100644
index 0000000000..ba4e18e8cc
--- /dev/null
+++ b/target/linux/coldfire/patches/063-m5445x_rambar_config.patch
@@ -0,0 +1,44 @@
+From 6651009d31bfcb8e364e25e944618465f510bd0b Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 24 Jun 2008 21:23:58 -0600
+Subject: [PATCH] Update SRAM/RAMBAR1 configuration for M5445x.
+
+LTIBName: m5445x-rambar-config
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/head.S   |    5 +++--
+ include/asm-m68k/coldfire.h |    9 +++++++--
+ 2 files changed, 10 insertions(+), 4 deletions(-)
+
+--- a/arch/m68k/coldfire/head.S
++++ b/arch/m68k/coldfire/head.S
+@@ -285,8 +285,9 @@ ENTRY(__start)
+ 	movel	%a0,%usp
+ 
+ #if defined(CONFIG_M5445X)
+-	movel  #(MCF_RAMBAR1 + 0x221), %d0
+-	movec   %d0, %rambar1
++/* JKM -- don't enable it currently -- fix 	*/
++/*	movel  #(MCF_RAMBAR1 + 0x221), %d0	*/
++/*	movec   %d0, %rambar1 			*/
+ #elif defined(CONFIG_M547X_8X)
+ 	movel   #MCF_MBAR, %d0
+ 	movec   %d0, %mbar
+--- a/include/asm-m68k/coldfire.h
++++ b/include/asm-m68k/coldfire.h
+@@ -3,8 +3,13 @@
+ 
+ #if defined(CONFIG_M5445X)
+ #define MCF_MBAR	0x0
+-#define MCF_RAMBAR1 	0x80000000
+-#define MCF_SRAM	0x80000000
++/*
++ * Even though RAMBAR1 should be in the 0x8xxxxxxx range there
++ * is a problem that needs to be resolved.  Currently head.S
++ * disables SRAM/RAMBAR1.
++ */
++#define MCF_RAMBAR1 	0x40000000
++#define MCF_SRAM	0x40000000
+ #elif defined(CONFIG_M547X_8X)
+ #define MCF_MBAR	0xF0000000
+ #define MCF_MMUBAR	0xF1000000
diff --git a/target/linux/coldfire/patches/064-mcfv4e_update_cmdlines.patch b/target/linux/coldfire/patches/064-mcfv4e_update_cmdlines.patch
new file mode 100644
index 0000000000..0b382d285c
--- /dev/null
+++ b/target/linux/coldfire/patches/064-mcfv4e_update_cmdlines.patch
@@ -0,0 +1,30 @@
+From 7b2dd837d32050d88eadfb0c71c381f7478f55b3 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 24 Jun 2008 22:09:34 -0600
+Subject: [PATCH] Update default command lines.
+
+LTIBName: mcfv4e-update-cmdlines
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/config.c |    8 +++++---
+ 1 files changed, 5 insertions(+), 3 deletions(-)
+
+--- a/arch/m68k/coldfire/config.c
++++ b/arch/m68k/coldfire/config.c
+@@ -132,11 +132,13 @@ int __init uboot_commandline(char *boota
+ /*
+  * This routine does things not done in the bootloader.
+  */
+-#if defined(CONFIG_M5445X)
+-#define FOO_DEFAULT_COMMAND_LINE "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
++#if defined(CONFIG_M54451)
+ #define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe/rootfs/ ip=172.27.155.51:172.27.155.1"
++#elif defined(CONFIG_M54455)
++#define MTD_DEFAULT_COMMAND_LINE "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
++#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe/rootfs/ ip=172.27.155.55:172.27.155.1"
+ #elif defined(CONFIG_M547X_8X)
+-#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/rigo/rootfs/ ip=172.27.155.85:172.27.155.1"
++#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/rigo/rootfs/ ip=172.27.155.75:172.27.155.1"
+ #endif
+ asmlinkage void __init cf_early_init(void)
+ {
diff --git a/target/linux/coldfire/patches/065-mcfv4e_bss_clear_move.patch b/target/linux/coldfire/patches/065-mcfv4e_bss_clear_move.patch
new file mode 100644
index 0000000000..84a26a3e21
--- /dev/null
+++ b/target/linux/coldfire/patches/065-mcfv4e_bss_clear_move.patch
@@ -0,0 +1,46 @@
+From 87ea76988875856dc1c3657b27ac792d2f0311e9 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 24 Jun 2008 22:12:17 -0600
+Subject: [PATCH] Move BSS initialization after mmu setup.
+
+LTIBName: mcfv4e-bss-clear-move
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/head.S |   19 +++++++++----------
+ 1 files changed, 9 insertions(+), 10 deletions(-)
+
+--- a/arch/m68k/coldfire/head.S
++++ b/arch/m68k/coldfire/head.S
+@@ -326,16 +326,6 @@ ENTRY(__start)
+ 	movec   %d0, %acr3
+ 	nop
+ 
+-#ifdef CONFIG_COLDFIRE
+-/* zero bss */
+-	lea	_sbss,%a0
+-	lea	_ebss,%a1
+-	clrl	%d0
+-_loop_bss:
+-	movel	%d0,(%a0)+
+-	cmpl	%a0,%a1
+-	bne	_loop_bss
+-#endif
+ 	/* If you change the memory size to another value make a matching 
+ 	   change in paging_init(cf-mmu.c) to zones_size[]. */
+ 
+@@ -564,6 +554,15 @@ ENTRY(__running_high)
+ 	addl	#PAGE_OFFSET,%a1
+ 	movel	%a1,%a0@
+ 
++/* zero bss */
++	lea	_sbss,%a0
++	lea	_ebss,%a1
++	clrl	%d0
++_loop_bss:
++	movel	%d0,(%a0)+
++	cmpl	%a0,%a1
++	bne	_loop_bss
++
+ 	/* Unmap unity mappings */
+ #if CONFIG_SDRAM_BASE != PAGE_OFFSET
+ #if defined(CONFIG_M5445X)
diff --git a/target/linux/coldfire/patches/066-mcfv4e_endmem_fix.patch b/target/linux/coldfire/patches/066-mcfv4e_endmem_fix.patch
new file mode 100644
index 0000000000..e334f42ea4
--- /dev/null
+++ b/target/linux/coldfire/patches/066-mcfv4e_endmem_fix.patch
@@ -0,0 +1,22 @@
+From 601145f682eab66abca5d154a8a9fdf275acd8ba Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 24 Jun 2008 22:20:31 -0600
+Subject: [PATCH] Fix off by 1 error with endmem.
+
+LTIBName: mcfv4e-endmem-fix
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/config.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+--- a/arch/m68k/coldfire/config.c
++++ b/arch/m68k/coldfire/config.c
+@@ -449,7 +449,7 @@ void __init config_coldfire(void)
+ /*	mach_hwclk 		= coldfire_hwclk; to be done */
+ 	mach_get_model 		= coldfire_get_model;
+ 
+-	coldfire_bootmem_alloc(startmem, endmem);
++	coldfire_bootmem_alloc(startmem, endmem-1);
+ 
+ 	/*
+ 	 * initrd setup
diff --git a/target/linux/coldfire/patches/067-mcfv4e_acr_cleanup.patch b/target/linux/coldfire/patches/067-mcfv4e_acr_cleanup.patch
new file mode 100644
index 0000000000..3a0736c8af
--- /dev/null
+++ b/target/linux/coldfire/patches/067-mcfv4e_acr_cleanup.patch
@@ -0,0 +1,112 @@
+From ddc092180bd24b34afdd6fd7cd48b77b55a5bd5e Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 24 Jun 2008 23:21:07 -0600
+Subject: [PATCH] Cleanup ACR mappings and document.
+
+LTIBName: mcfv4e-acr-cleanup
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/head.S |   81 +++++++++++++++++++++++++-------------------
+ 1 files changed, 46 insertions(+), 35 deletions(-)
+
+--- a/arch/m68k/coldfire/head.S
++++ b/arch/m68k/coldfire/head.S
+@@ -53,52 +53,63 @@
+ #define __FINIT		.previous
+ #endif
+ 
+-/* JKM -- REVISE DOCS FOR M547x_8x and PHYS MAPPING */
++#if CONFIG_SDRAM_BASE != PAGE_OFFSET
+ /*
+- * Setup ACR mappings to provide the following memory map:
+- *   Data
+- *     0xA0000000 -> 0xAFFFFFFF [0] NO CACHE / PRECISE / SUPER ONLY
+- *     0xF0000000 -> 0xFFFFFFFF [1] NO CACHE / PRECISE / SUPER ONLY
+- *   Code
+- *     None currently (mapped via TLBs)
++ * Kernel mapped to virtual ram address.
++ *
++ * M5445x:
++ *    Data[0]: 0xF0000000 -> 0xFFFFFFFF	System regs
++ *    Data[1]: 0xA0000000 -> 0xAFFFFFFF	PCI
++ *    Code[0]: Not Mapped
++ *    Code[1]: Not Mapped
++ *
++ * M547x/M548x
++ *    Data[0]: 0xF0000000 -> 0xFFFFFFFF	System regs
++ *    Data[1]: Not Mapped
++ *    Code[0]: Not Mapped
++ *    Code[1]: Not Mapped
+  */
+-
+-#if CONFIG_SDRAM_BASE != PAGE_OFFSET
+ #if defined(CONFIG_M5445X)
+-#if 0
+-#define ACR0_DEFAULT	#0xA00FA048   /* ACR0 default value */
+-#endif
+-#define ACR0_DEFAULT	#0x400FA028   /* ACR0 default value */
+-#define ACR1_DEFAULT	#0xF00FA040   /* ACR1 default value */
+-#if 0
+-#define ACR2_DEFAULT	#0x00000000   /* ACR2 default value */
+-#endif
+-#define ACR2_DEFAULT	#0x400FA028   /* ACR2 default value */
+-#define ACR3_DEFAULT	#0x00000000   /* ACR3 default value */
+-/* ACR mapping for FPGA (maps 0) */
+-#define ACR0_FPGA	#0x000FA048   /* ACR0 enable FPGA */
++#define ACR0_DEFAULT	#0xF00FA048   /* System regs */
++#define ACR1_DEFAULT	#0xA00FA048   /* PCI */
++#define ACR2_DEFAULT	#0x00000000   /* Not Mapped */
++#define ACR3_DEFAULT	#0x00000000   /* Not Mapped */
+ #elif defined(CONFIG_M547X_8X)
+-#define ACR0_DEFAULT	#0xE000C040   /* ACR0 default value */
+-#define ACR1_DEFAULT	#0x00000000   /* ACR1 default value */
+-#define ACR2_DEFAULT	#0x00000000   /* ACR2 default value */
+-#define ACR3_DEFAULT	#0x00000000   /* ACR3 default value */
++#define ACR0_DEFAULT	#0xF00FA048   /* System Regs */
++#define ACR1_DEFAULT	#0x00000000   /* Not Mapped */
++#define ACR2_DEFAULT	#0x00000000   /* Not Mapped */
++#define ACR3_DEFAULT	#0x00000000   /* Not Mapped */
+ #endif
+ 
+-#else
++#else /* CONFIG_SDRAM_BASE = PAGE_OFFSET */
++/*
++ * Kernel mapped to physical ram address.
++ *
++ * M5445x:
++ *    Data[0]: 0xF0000000 -> 0xFFFFFFFF	System regs
++ *    Data[1]: 0x40000000 -> 0x4FFFFFFF	SDRAM - uncached
++ *    Code[0]: Not Mapped
++ *    Code[1]: 0x40000000 -> 0x4FFFFFFF	SDRAM - cached
++ *
++ * M547x/M548x
++ *    Data[0]: 0xF0000000 -> 0xFFFFFFFF	System regs
++ *    Data[1]: 0x00000000 -> 0x0FFFFFFF	SDRAM - uncached
++ *    Code[0]: Not Mapped
++ *    Code[1]: 0x00000000 -> 0x0FFFFFFF	SDRAM - cached
++ */
+ #if defined(CONFIG_M5445X)
+-#define ACR0_DEFAULT	#0xF00FC040   /* ACR0 default value */
+-#define ACR1_DEFAULT	#0x400FA008   /* ACR1 default value */
+-#define ACR2_DEFAULT	#0x00000000   /* ACR2 default value */
+-#define ACR3_DEFAULT	#0x400FA008   /* ACR3 default value */
++#define ACR0_DEFAULT	#0xF00FA048   /* System Regs */
++#define ACR1_DEFAULT	#0x400FA048   /* SDRAM uncached */
++#define ACR2_DEFAULT	#0x00000000   /* Not mapped */
++#define ACR3_DEFAULT	#0x400FA008   /* SDRAM cached */
+ #elif defined(CONFIG_M547X_8X)
+-#define ACR0_DEFAULT	#0xF00FC040   /* ACR0 default value */
+-#define ACR1_DEFAULT	#0x000FA008   /* ACR1 default value */
+-#define ACR2_DEFAULT	#0x00000000   /* ACR2 default value */
+-#define ACR3_DEFAULT	#0x000FA008   /* ACR3 default value */
++#define ACR0_DEFAULT	#0xF00FA048   /* System Regs */
++#define ACR1_DEFAULT	#0x000FA048   /* SDRAM uncached */
++#define ACR2_DEFAULT	#0x00000000   /* Not mapped */
++#define ACR3_DEFAULT	#0x000FA008   /* SDRAM cached */
+ #endif
+ #endif
+ 
+-
+ /* Several macros to make the writing of subroutines easier:
+  * - func_start marks the beginning of the routine which setups the frame
+  *   register and saves the registers, it also defines another macro
diff --git a/target/linux/coldfire/patches/068-m547x_8x_NOR_FLASH_baseaddr.patch b/target/linux/coldfire/patches/068-m547x_8x_NOR_FLASH_baseaddr.patch
new file mode 100644
index 0000000000..a2891de83b
--- /dev/null
+++ b/target/linux/coldfire/patches/068-m547x_8x_NOR_FLASH_baseaddr.patch
@@ -0,0 +1,21 @@
+From 423d67db899b8f2e20b09fac7da1f7eaaa4523cb Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 24 Jun 2008 23:24:30 -0600
+Subject: [PATCH] Add the M547x/M548x NOR_FLASH base address.
+
+LTIBName: m547x-8x-NOR-FLASH-baseaddr
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/Kconfig |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+--- a/arch/m68k/Kconfig
++++ b/arch/m68k/Kconfig
+@@ -459,6 +459,7 @@ config NOR_FLASH_BASE
+ 	depends on COLDFIRE
+ 	default 0x00000000 if M54451EVB
+ 	default 0x00000000 if M54455EVB
++	default 0xE0000000 if M547X_8X
+ 
+ config M68KFPU_EMU
+ 	bool "Math emulation support (EXPERIMENTAL)"
diff --git a/target/linux/coldfire/patches/069-m5445x_fecint_nest_1.patch b/target/linux/coldfire/patches/069-m5445x_fecint_nest_1.patch
new file mode 100644
index 0000000000..a3f14eb2f0
--- /dev/null
+++ b/target/linux/coldfire/patches/069-m5445x_fecint_nest_1.patch
@@ -0,0 +1,32 @@
+From 8809b176ecde425d13cab8920a66fbfd6fb4c3b7 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 24 Jun 2008 23:26:54 -0600
+Subject: [PATCH] Make sure interrupt handler calls aren't nested.
+
+LTIBName: m5445x-fecint-nest
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/net/fec.c |    5 ++++-
+ 1 files changed, 4 insertions(+), 1 deletions(-)
+
+--- a/drivers/net/fec.c
++++ b/drivers/net/fec.c
+@@ -23,6 +23,9 @@
+  *
+  * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be)
+  * Copyright (c) 2004-2006 Macq Electronique SA.
++ *
++ * Coldfire bug fixes and cleanup by Kurt Mahan (kmahan@freescale.com)
++ * Copyright 2007-2008 Freescale Semiconductor, Inc. All Rights Reserved.
+  */
+ 
+ #include <linux/module.h>
+@@ -1865,7 +1868,7 @@ static void __inline__ fec_request_intrs
+ 
+ 	/* Setup interrupt handlers. */
+ 	for (idp = id; idp->name; idp++) {
+-		if (request_irq(b+idp->irq, fec_enet_interrupt, 0,
++		if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED,
+ 		    idp->name, dev) != 0)
+ 			printk(KERN_ERR "FEC: Could not alloc %s IRQ(%d)!\n",
+ 				idp->name, b+idp->irq);
diff --git a/target/linux/coldfire/patches/070-m5445x_rambar_init_1.patch b/target/linux/coldfire/patches/070-m5445x_rambar_init_1.patch
new file mode 100644
index 0000000000..e07eba3ed0
--- /dev/null
+++ b/target/linux/coldfire/patches/070-m5445x_rambar_init_1.patch
@@ -0,0 +1,25 @@
+From 1667ce157c8cc2ffc13f1e31c64982d0af95d5a5 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 25 Jun 2008 01:34:30 -0600
+Subject: [PATCH] Disable RAMBAR1 on initialization.
+
+LTIBName: m5445x-rambar-init
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/head.S |    5 ++---
+ 1 files changed, 2 insertions(+), 3 deletions(-)
+
+--- a/arch/m68k/coldfire/head.S
++++ b/arch/m68k/coldfire/head.S
+@@ -296,9 +296,8 @@ ENTRY(__start)
+ 	movel	%a0,%usp
+ 
+ #if defined(CONFIG_M5445X)
+-/* JKM -- don't enable it currently -- fix 	*/
+-/*	movel  #(MCF_RAMBAR1 + 0x221), %d0	*/
+-/*	movec   %d0, %rambar1 			*/
++	movel	#0x80000000, %d0
++	movec	%d0, %rambar1
+ #elif defined(CONFIG_M547X_8X)
+ 	movel   #MCF_MBAR, %d0
+ 	movec   %d0, %mbar
diff --git a/target/linux/coldfire/patches/071-m5445x_i2c.patch b/target/linux/coldfire/patches/071-m5445x_i2c.patch
new file mode 100644
index 0000000000..ecda4d6c70
--- /dev/null
+++ b/target/linux/coldfire/patches/071-m5445x_i2c.patch
@@ -0,0 +1,699 @@
+From e1618e943f60a4f8f778c4f7c389e2fa13eb0a83 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 26 Jun 2008 16:29:56 -0600
+Subject: [PATCH] Add I2C support for the M5445x platforms.
+
+LTIBName: m5445x-i2c
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/i2c/busses/Kconfig   |   10 +
+ drivers/i2c/busses/Makefile  |    1 +
+ drivers/i2c/busses/i2c-mcf.c |  573 ++++++++++++++++++++++++++++++++++++++++++
+ drivers/i2c/busses/i2c-mcf.h |   75 ++++++
+ 4 files changed, 659 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/i2c/busses/i2c-mcf.c
+ create mode 100644 drivers/i2c/busses/i2c-mcf.h
+
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -302,6 +302,16 @@ config I2C_POWERMAC
+ 	  This support is also available as a module.  If so, the module
+ 	  will be called i2c-powermac.
+ 
++config I2C_MCF
++	tristate "MCF ColdFire"
++	depends on I2C && EXPERIMENTAL
++	help
++	  If you say yes to this option, support will be included for the
++	  I2C on most ColdFire CPUs
++
++	  This driver can also be built as a module.  If so, the module
++	  will be called i2c-mcf.
++ 
+ config I2C_MPC
+ 	tristate "MPC107/824x/85xx/52xx/86xx"
+ 	depends on PPC32
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -53,6 +53,7 @@ obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3
+ obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
+ obj-$(CONFIG_I2C_MCF548x)       += i2c-mcf548x.o
++obj-$(CONFIG_I2C_MCF)		+= i2c-mcf.o
+ 
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-mcf.c
+@@ -0,0 +1,573 @@
++/*
++    i2c-mcf.c - Part of lm_sensors, Linux kernel modules for hardware monitoring
++
++    Copyright (c) 2005, Derek CL Cheung <derek.cheung@sympatico.ca>
++					<http://www3.sympatico.ca/derek.cheung>
++
++    Copyright (c) 2006-2007, emlix
++			Sebastian Hess <sh@emlix.com>
++
++    Copyright (c) 2006-2007 Freescale Semiconductor, Inc
++			Yaroslav Vinogradov <yaroslav.vinogradov@freescale.com>
++			Matt Waddel <Matt.Waddel@freescale.com>
++
++    This program is free software; you can redistribute it and/or modify
++    it under the terms of the GNU General Public License as published by
++    the Free Software Foundation; either version 2 of the License, or
++    (at your option) any later version.
++
++    This program is distributed in the hope that it will be useful,
++    but WITHOUT ANY WARRANTY; without even the implied warranty of
++    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++    GNU General Public License for more details.
++
++    You should have received a copy of the GNU General Public License
++    along with this program; if not, write to the Free Software
++    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++
++    Changes:
++    v0.1 	26 March 2005
++        	Initial Release - developed on uClinux with 2.6.9 kernel
++
++    v0.2	29 May 2006
++		Modified to be more generic and added support for
++		i2c_master_xfer
++
++    This I2C adaptor supports the ColdFire CPU I2C module. Since most Coldfire
++    CPUs' I2C module use the same register set (e.g., MCF5249), the code is very
++    portable and re-usable to other Coldfire CPUs.
++
++    The transmission frequency is set at about 100KHz for the CPU board with
++    8MHz crystal. If the CPU board uses different system clock frequency, you 
++    should change the following line:
++                static int __init i2c_coldfire_init(void)
++                {
++                                .........
++                        // Set transmission frequency 0x15 = ~100kHz
++                        *MCF_I2C_I2FDR = 0x15;
++                                ........
++                }
++
++    Remember to perform a dummy read to set the ColdFire CPU's I2C module for 
++    read before reading the actual byte from a device
++
++    The I2C_SM_BUS_BLOCK_DATA function are not yet ready but most lm_senors 
++    do not care
++*/
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/i2c.h>
++#include <linux/delay.h>
++#include <linux/string.h>
++#include <asm/coldfire.h>
++#include <asm/mcfsim.h>
++#include <asm/types.h>
++#include <linux/platform_device.h>
++#include "i2c-mcf.h"
++
++
++static struct i2c_algorithm coldfire_algorithm = {
++	/*.name		= "ColdFire I2C algorithm",
++	.id		= I2C_ALGO_SMBUS,*/
++	.smbus_xfer	= coldfire_i2c_access,
++	.master_xfer    = coldfire_i2c_master,
++	.functionality	= coldfire_func,
++};
++
++
++static struct i2c_adapter coldfire_adapter = {
++	.owner		= THIS_MODULE,
++	.class          = I2C_CLASS_HWMON,
++	.algo		= &coldfire_algorithm,
++	.name		= "ColdFire I2C adapter",
++};
++
++
++__u16 lastaddr;
++__u16 lastop;
++
++static inline int coldfire_do_first_start(__u16 addr,__u16 flags)
++{
++	int err;
++	/*
++	 * Generate a stop and put the I2C module into slave mode
++	 */
++	*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MSTA;
++
++	/*
++	 * Generate a new Start signal
++	 */
++	err = coldfire_i2c_start(flags & I2C_M_RD ? I2C_SMBUS_READ : I2C_SMBUS_WRITE,
++				addr, FIRST_START);
++	if(err) return err;
++
++	lastaddr = addr;
++	lastop = flags & I2C_M_RD;	/* Ensure everything for new start */
++	return 0;
++}
++
++
++/*
++ *  read one byte data from the I2C bus
++ */
++static int coldfire_read_data(u8 * const rxData, const enum I2C_ACK_TYPE ackType) {
++
++	int timeout;
++
++	*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MTX;     	/* master receive mode*/
++
++	if (ackType == NACK)
++		*MCF_I2C_I2CR |= MCF_I2C_I2CR_TXAK;     /* generate NA */
++	else
++		*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK;    /* generate ACK */
++
++
++	/* read data from the I2C bus */
++	*rxData = *MCF_I2C_I2DR;
++
++	/* printk(">>> %s I2DR data is %.2x \n", __FUNCTION__, *rxData); */
++
++	/* wait for data transfer to complete */
++	timeout = 500;
++	while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IIF))
++		udelay(1);
++	if (timeout <= 0)
++		printk("%s - I2C IIF never set. Timeout is %d \n", __FUNCTION__,
++			timeout);
++
++
++	/* reset the interrupt bit */
++	*MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF;
++
++	if (timeout <= 0 )
++		return -1;
++	else
++		return 0;
++
++};
++
++
++/*
++ *  write one byte data onto the I2C bus
++ */
++static int coldfire_write_data(const u8 txData) {
++
++	int timeout;
++
++	timeout = 500;
++
++	*MCF_I2C_I2CR |= MCF_I2C_I2CR_MTX;	/* I2C module into TX mode */
++	*MCF_I2C_I2DR = txData;			/* send the data */
++
++	/* wait for data transfer to complete */
++	/* rely on the interrupt handling bit */
++	timeout = 500;
++	while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IIF))
++		udelay(1);
++	if (timeout <=0)
++		printk("%s - I2C IIF never set. Timeout is %d \n", __FUNCTION__,
++			timeout);
++
++
++	/* reset the interrupt bit */
++	*MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF;
++
++	if (timeout <= 0 )
++		return -1;
++	else
++		return 0;
++
++};
++
++
++
++
++/*
++ *  Generate I2C start or repeat start signal
++ *  Combine the 7 bit target_address and the R/W bit and put it onto the I2C bus
++ */
++static int coldfire_i2c_start(const char read_write, const u16 target_address, const enum I2C_START_TYPE start_type) {
++
++	int timeout;
++
++	/* printk(">>> %s START TYPE %s \n", __FUNCTION__, 
++		   start_type == FIRST_START ? "FIRST_START":"REPEAT_START");*/
++
++	*MCF_I2C_I2CR |= MCF_I2C_I2CR_IEN;
++
++	if (start_type == FIRST_START) {
++		/* Make sure the I2C bus is idle */
++		timeout = 500;		/* 500us timeout */
++		while (timeout-- && (*MCF_I2C_I2SR & MCF_I2C_I2SR_IBB))
++			udelay(1);
++		if (timeout <= 0) {
++			printk("%s - I2C bus always busy in the past 500us timeout is %d \n", __FUNCTION__, timeout);
++			goto check_rc;
++		}
++		/* generate a START and put the I2C module into MASTER TX mode*/
++		*MCF_I2C_I2CR |= (MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_MTX);
++
++		/* wait for bus busy to be set */
++		timeout = 500;
++		while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IBB))
++			udelay(1);
++		if (timeout <= 0) {
++			printk("%s - I2C bus is never busy after START. Timeout is %d \n", __FUNCTION__, timeout);
++			goto check_rc;
++		}
++
++	} else {
++		/* this is repeat START */
++		udelay(500);	/* need some delay before repeat start */
++		*MCF_I2C_I2CR |= (MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_RSTA);
++	}
++
++
++	/* combine the R/W bit and the 7 bit target address and put it onto 
++	   the I2C bus */
++	*MCF_I2C_I2DR = ((target_address & 0x7F) << 1) | (read_write == I2C_SMBUS_WRITE ? 0x00 : 0x01);
++
++	/* wait for bus transfer to complete */
++	/* when one byte transfer is completed, IIF set at the faling edge of 
++	   the 9th clock */
++	timeout = 500;
++	while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IIF))
++		udelay(1);
++	if (timeout <= 0)
++		printk("%s - I2C IIF never set. Timeout is %d \n", __FUNCTION__, timeout);
++
++
++check_rc:
++	/* reset the interrupt bit */
++	*MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF;
++
++	if (timeout <= 0)
++		return -1;
++	else
++		return 0;
++};
++
++
++/*
++ *  5282 SMBUS supporting functions
++ */
++
++static s32 coldfire_i2c_access(struct i2c_adapter *adap, u16 addr,
++			      unsigned short flags, char read_write,
++			      u8 command, int size, union i2c_smbus_data *data)
++{
++	int rc = 0;
++	u8 rxData, tempRxData[2];
++
++	switch (size) {
++		case I2C_SMBUS_QUICK:
++			rc = coldfire_i2c_start(read_write, addr, FIRST_START); 	/* generate START */
++                        break;
++		case I2C_SMBUS_BYTE:
++			rc = coldfire_i2c_start(read_write, addr, FIRST_START);
++			*MCF_I2C_I2CR |= MCF_I2C_I2CR_TXAK;     /*generate NA */
++			if (read_write == I2C_SMBUS_WRITE)
++				rc += coldfire_write_data(command);
++			else {
++				coldfire_read_data(&rxData, NACK);/*dummy read*/
++				rc += coldfire_read_data(&rxData, NACK);
++				data->byte = rxData;
++			}
++			*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK; /* reset ACK bit */
++			break;
++		case I2C_SMBUS_BYTE_DATA:
++			rc = coldfire_i2c_start(I2C_SMBUS_WRITE, addr, FIRST_START);
++			rc += coldfire_write_data(command);
++			if (read_write == I2C_SMBUS_WRITE)
++				rc += coldfire_write_data(data->byte);
++			else {
++				/* This is SMBus READ Byte Data Request. 
++				   Perform REPEAT START */
++				rc += coldfire_i2c_start(I2C_SMBUS_READ, addr, 
++							 REPEAT_START);
++				coldfire_read_data(&rxData, ACK);/* dummy read*/
++				/* Disable Acknowledge, generate STOP after 
++				   next byte transfer */
++				rc += coldfire_read_data(&rxData, NACK);
++				data->byte = rxData;
++			}
++			*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK;/* reset to normal ACk */
++			break;
++		case I2C_SMBUS_PROC_CALL:
++        	case I2C_SMBUS_WORD_DATA:
++			dev_info(&adap->dev, "size = I2C_SMBUS_WORD_DATA \n");
++			rc = coldfire_i2c_start(I2C_SMBUS_WRITE, addr, 
++						FIRST_START);
++			rc += coldfire_write_data(command);
++			if (read_write == I2C_SMBUS_WRITE) {
++				rc += coldfire_write_data(data->word & 0x00FF);
++				rc += coldfire_write_data((data->word & 0x00FF) >> 8);
++			} else {
++				/* This is SMBUS READ WORD request. 
++				   Peform REPEAT START */
++				rc += coldfire_i2c_start(I2C_SMBUS_READ, addr, 
++							 REPEAT_START);
++				coldfire_read_data(&rxData, ACK);/* dummy read*/
++				/* Disable Acknowledge, generate STOP after 
++				   next byte transfer */
++				/* read the MS byte from the device */
++				rc += coldfire_read_data(&rxData, NACK);
++				tempRxData[1] = rxData;
++				/* read the LS byte from the device */
++				rc += coldfire_read_data(&rxData, NACK);
++				tempRxData[0] = rxData;
++				/* the host driver expect little endian 
++				   convention. Swap the byte */
++				data->word = (tempRxData[0] << 8)|tempRxData[1];
++			}
++			*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK;
++			break;
++		case I2C_SMBUS_BLOCK_DATA:
++			/* Not done yet */
++			break;
++		default:
++			printk("Unsupported I2C size \n");
++			rc = -1;
++			break;
++	};
++
++	/* Generate a STOP and put I2C module into slave mode */
++	*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MSTA;
++
++	/* restore interrupt */
++	*MCF_I2C_I2CR |= MCF_I2C_I2CR_IIEN;
++
++	if (rc < 0)
++		return -1;
++	else
++		return 0;
++};
++
++
++/*
++ *  List the SMBUS functions supported by this I2C adaptor
++ *  Also tell the I2C Subsystem that we are able of master_xfer()
++ */
++static u32 coldfire_func(struct i2c_adapter *adapter)
++{
++	return(I2C_FUNC_SMBUS_QUICK |
++	       I2C_FUNC_SMBUS_BYTE |
++	       I2C_FUNC_SMBUS_PROC_CALL |
++	       I2C_FUNC_SMBUS_BYTE_DATA |
++	       I2C_FUNC_SMBUS_WORD_DATA |
++	       I2C_FUNC_I2C |
++	       I2C_FUNC_SMBUS_BLOCK_DATA);
++};
++
++static int coldfire_i2c_master(struct i2c_adapter *adap,struct i2c_msg *msgs,
++	                       int num)
++{
++	u8 dummyRead;
++	struct i2c_msg *p;
++	int i, err = 0;
++	int ic=0;
++
++	lastaddr = 0;
++	lastop = 8;
++
++	/* disable the IRQ, we are doing polling */
++	*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_IIEN;
++
++	dev_dbg(&adap->dev,"Num of actions: %d\n", num);
++
++	for (i = 0; !err && i < num; i++) {
++		p = &msgs[i];
++
++
++		if (!p->len)
++		{
++			dev_dbg(&adap->dev,"p->len == 0!\n");
++			continue;
++		}
++		/*
++		 * Generate a new Start, if the target address differs from 
++		 * the last target, generate a stop in this case first
++		 */
++		if(p->addr != lastaddr)
++		{
++			err = coldfire_do_first_start(p->addr,p->flags);
++			if(err)
++			{
++				dev_dbg(&adap->dev,"First Init failed!\n");
++				break;
++			}
++		}
++
++		else if((p->flags & I2C_M_RD)  != lastop)
++		{
++			/*
++			 * If the Operational Mode changed, we need to do this 
++			 * here ...
++			 */
++			dev_dbg(&adap->dev,"%s(): Direction changed, was: %d; is now: %d\n", __FUNCTION__, lastop, p->flags & I2C_M_RD);
++
++			/* Last op was an read, now it's write: complete stop 
++			   and reinit */
++			if (lastop & I2C_M_RD)
++			{
++				dev_dbg(&adap->dev,"%s(): The device is in read state, we must reset!\n", __FUNCTION__);
++				if((err = coldfire_do_first_start(p->addr,p->flags)))
++					break;
++			}
++			else
++			{
++				dev_dbg(&adap->dev,"%s(): We switchted to read mode\n",__FUNCTION__);
++				if((err = coldfire_i2c_start((p->flags & I2C_M_RD) ? I2C_SMBUS_READ : I2C_SMBUS_WRITE,
++				          p->addr, REPEAT_START)))
++					break;
++			}
++
++			lastop = p->flags & I2C_M_RD;	/* Save the last op */
++		}
++
++		if (p->flags & I2C_M_RD)
++		{
++			/*
++			 * When ever we get here, a new session was activated, 
++			 * so read a dummy byte
++			 */
++			coldfire_read_data(&dummyRead, ACK);
++			/*
++			 * read p->len -1 bytes with ACK to the slave,
++			 * read the last byte without the ACK, to inform him 
++			 * about the stop afterwards
++			 */
++			ic = 0;
++			while(!err && (ic < p->len-1 ))
++			{
++				err = coldfire_read_data(p->buf+ic, ACK );
++				ic++;
++			}
++			if(!err)
++				err = coldfire_read_data(p->buf+ic, NACK);
++			dev_dbg(&coldfire_adapter.dev,"read: %2x\n",p->buf[ic]);
++		}
++		else
++		{
++			if(p->len == 2)
++				dev_dbg(&coldfire_adapter.dev,"writing: 0x %2x %2x\n", p->buf[0], p->buf[1]);
++
++			/*
++			 * Write data to the slave
++			 */
++			for(ic=0; !err && ic < p->len; ic++)
++			{
++				err = coldfire_write_data(p->buf[ic]);
++				if(err)
++				{
++					dev_dbg(&coldfire_adapter.dev, "Failed to write data\n");
++				}
++			}
++		}
++	}
++
++	/*
++	 * Put the device into slave mode to enable the STOP Generation 
++	 * (the RTC needs this)
++	 */
++	*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MSTA;
++
++	*MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK;	/* reset the ACK bit */
++
++	/* restore interrupt */
++	*MCF_I2C_I2CR |= MCF_I2C_I2CR_IIEN;
++
++	/* Return the number of messages processed, or the error code. */
++	if (err == 0)
++		err = num;
++	return err;
++}
++
++
++/*
++ *  Initalize the 5282 I2C module
++ *  Disable the 5282 I2C interrupt capability. Just use callback
++ */
++
++static int __init i2c_coldfire_init(void)
++{
++	int retval;
++	u8  dummyRead;
++
++#if defined(CONFIG_M532x) || defined(CONFIG_M5445X)
++	/*
++	 * Initialize the GPIOs for I2C
++	 */
++	MCF_GPIO_PAR_FECI2C |= (0
++    			    | MCF_GPIO_PAR_FECI2C_PAR_SDA(3)
++    			    | MCF_GPIO_PAR_FECI2C_PAR_SCL(3));
++#elif defined(CONFIG_M5253)
++	{
++	volatile u32 *reg;
++	/* GPIO Bit 41 = SCL0, Bit 42 = SDA0 */
++	reg = (volatile u32 *)(MCF_MBAR2 + MCFSIM2_GPIO1FUNC);
++	*reg &= 0xFFFFF9FF;
++	}
++#else
++	/* Initialize PASP0 and PASP1 to I2C functions, 5282 user guide 26-19 */
++	/* Port AS Pin Assignment Register (PASPAR)		*/
++	/*		PASPA1 = 11 = AS1 pin is I2C SDA	*/
++	/*		PASPA0 = 11 = AS0 pin is I2C SCL	*/
++	*MCF_GPIO_PASPAR |= 0x000F;		/* u16 declaration */
++#endif
++
++
++    	/* Set transmission frequency 0x15 = ~100kHz */
++    	*MCF_I2C_I2FDR = 0x15;
++
++	/* set the 5282 I2C slave address though we never use it */
++    	*MCF_I2C_I2ADR = 0x6A;
++
++    	/* Enable I2C module and if IBB is set, do the special initialzation */
++	/* procedures as are documented at the 5282 User Guide page 24-11 */
++    	*MCF_I2C_I2CR |= MCF_I2C_I2CR_IEN;
++	if ((*MCF_I2C_I2SR & MCF_I2C_I2SR_IBB) == 1) {
++		printk("%s - do special 5282 I2C init procedures \n", 
++			__FUNCTION__);
++		*MCF_I2C_I2CR = 0x00;
++		*MCF_I2C_I2CR = 0xA0;
++		dummyRead = *MCF_I2C_I2DR;
++		*MCF_I2C_I2SR = 0x00;
++		*MCF_I2C_I2CR = 0x00;
++	}
++
++	/* default I2C mode is - slave and receive */
++	*MCF_I2C_I2CR &= ~(MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_MTX);
++
++	coldfire_adapter.dev.parent = &platform_bus;
++	retval = i2c_add_adapter(&coldfire_adapter);
++
++	if (retval < 0)
++		printk("%s - return code is: %d \n", __FUNCTION__, retval);
++
++	return retval;
++};
++
++
++/*
++ *  I2C module exit function
++ */
++
++static void __exit i2c_coldfire_exit(void)
++{
++	/* disable I2C and Interrupt */
++	*MCF_I2C_I2CR &= ~(MCF_I2C_I2CR_IEN | MCF_I2C_I2CR_IIEN);
++	i2c_del_adapter(&coldfire_adapter);
++
++};
++
++
++MODULE_AUTHOR("Derek CL Cheung <derek.cheung@sympatico.ca>");
++MODULE_DESCRIPTION("MCF5282 I2C adaptor");
++MODULE_LICENSE("GPL");
++
++module_init(i2c_coldfire_init);
++module_exit(i2c_coldfire_exit);
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-mcf.h
+@@ -0,0 +1,75 @@
++/*
++    i2c-mcf.h - header file for i2c-mcf.c
++
++    Copyright (c) 2005, Derek CL Cheung <derek.cheung@sympatico.ca>
++                                        <http://www3.sympatico.ca/derek.cheung>
++
++    Copyright (c) 2006-2007, emlix
++			Sebastian Hess <sh@emlix.com>
++
++    Copyright (c) 2006-2007 Freescale Semiconductor, Inc
++			Yaroslav Vinogradov <yaroslav.vinogradov@freescale.com>
++			Matt Waddel <Matt.Waddel@freescale.com>
++
++    This program is free software; you can redistribute it and/or modify
++    it under the terms of the GNU General Public License as published by
++    the Free Software Foundation; either version 2 of the License, or
++    (at your option) any later version.
++
++    This program is distributed in the hope that it will be useful,
++    but WITHOUT ANY WARRANTY; without even the implied warranty of
++    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++    GNU General Public License for more details.
++
++    You should have received a copy of the GNU General Public License
++    along with this program; if not, write to the Free Software
++    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++
++    Changes:
++    v0.1	26 March 2005
++        	Initial Release - developed on uClinux with 2.6.9 kernel
++    v0.2	29 May 2006
++		Modified to be more generic and added support for
++		i2c_master_xfer
++*/
++
++
++#ifndef __I2C_MCF_H__
++#define __I2C_MCF_H__
++
++enum I2C_START_TYPE { FIRST_START, REPEAT_START };
++enum I2C_ACK_TYPE { ACK, NACK};
++
++/* Function prototypes */
++static u32 coldfire_func(struct i2c_adapter *adapter);
++static s32 coldfire_i2c_access(struct i2c_adapter *adap, u16 address,
++                              unsigned short flags, char read_write,
++                              u8 command, int size, union i2c_smbus_data *data);
++static int coldfire_write_data(const u8 data);
++static int coldfire_i2c_start(const char read_write, const u16 target_address, const enum I2C_START_TYPE i2c_start);
++static int coldfire_read_data(u8 * const rxData, const enum I2C_ACK_TYPE ackType);
++static int coldfire_i2c_master(struct i2c_adapter *adap,struct i2c_msg *msgs, int num);
++void dumpReg(char *, u16 addr, u8 data);
++
++#define MCF_I2C_I2ADR_ADDR(x)	(((x)&0x7F)<<0x01)
++#define MCF_I2C_I2FDR_IC(x)	(((x)&0x3F))
++
++/* I2C Control Register */
++#define MCF_I2C_I2CR_IEN	(0x80)	/* I2C enable */
++#define MCF_I2C_I2CR_IIEN	(0x40)	/* interrupt enable */
++#define MCF_I2C_I2CR_MSTA	(0x20)	/* master/slave mode */
++#define MCF_I2C_I2CR_MTX	(0x10)	/* transmit/receive mode */
++#define MCF_I2C_I2CR_TXAK	(0x08)	/* transmit acknowledge enable */
++#define MCF_I2C_I2CR_RSTA	(0x04)	/* repeat start */
++
++/* I2C Status Register */
++#define MCF_I2C_I2SR_ICF	(0x80)	/* data transfer bit */
++#define MCF_I2C_I2SR_IAAS	(0x40)	/* I2C addressed as a slave */
++#define MCF_I2C_I2SR_IBB	(0x20)	/* I2C bus busy */
++#define MCF_I2C_I2SR_IAL	(0x10)	/* aribitration lost */
++#define MCF_I2C_I2SR_SRW	(0x04)	/* slave read/write */
++#define MCF_I2C_I2SR_IIF	(0x02)	/* I2C interrupt */
++#define MCF_I2C_I2SR_RXAK	(0x01)	/* received acknowledge */
++
++/********************************************************************/
++#endif /*  __I2C_MCF_H__ */
diff --git a/target/linux/coldfire/patches/072-mcfv4e_disable_irq_nosync.patch b/target/linux/coldfire/patches/072-mcfv4e_disable_irq_nosync.patch
new file mode 100644
index 0000000000..c93c6f7c29
--- /dev/null
+++ b/target/linux/coldfire/patches/072-mcfv4e_disable_irq_nosync.patch
@@ -0,0 +1,24 @@
+From 69446dbc7af1fddf00f3ad0629008dd6875704a7 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Wed, 2 Jul 2008 16:03:56 -0600
+Subject: [PATCH] Add disable_irq_nosync alias to disable_irq.
+
+LTIBName: mcfv4e-disable-irq-nosync
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/ints.c |    4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+--- a/arch/m68k/coldfire/ints.c
++++ b/arch/m68k/coldfire/ints.c
+@@ -317,6 +317,10 @@ void disable_irq(unsigned int irq)
+ }
+ EXPORT_SYMBOL(disable_irq);
+ 
++void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq")));
++EXPORT_SYMBOL(disable_irq_nosync);
++
++
+ unsigned long probe_irq_on(void)
+ {
+ 	return 0;
diff --git a/target/linux/coldfire/patches/073-mcfv4e_uboot_bootargs.patch b/target/linux/coldfire/patches/073-mcfv4e_uboot_bootargs.patch
new file mode 100644
index 0000000000..34d1e3b306
--- /dev/null
+++ b/target/linux/coldfire/patches/073-mcfv4e_uboot_bootargs.patch
@@ -0,0 +1,32 @@
+From 39929365081d5aa7c311ee8325c7f1a0ffb88a76 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Mon, 7 Jul 2008 23:37:30 -0600
+Subject: [PATCH] Enable uboot bootargs.
+
+LTIBName: mcfv4e-uboot-bootargs
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/config.c |    5 -----
+ 1 files changed, 0 insertions(+), 5 deletions(-)
+
+--- a/arch/m68k/coldfire/config.c
++++ b/arch/m68k/coldfire/config.c
+@@ -196,7 +196,6 @@ asmlinkage void __init cf_early_init(voi
+ 	m68k_memory[m68k_num_memory].addr = CONFIG_SDRAM_BASE;
+ 	m68k_memory[m68k_num_memory++].size = CONFIG_SDRAM_SIZE;
+ 
+-#if 0
+ 	if (!uboot_commandline(m68k_command_line)) {
+ #if defined(CONFIG_BOOTPARAM)
+ 		strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE-1);
+@@ -204,10 +203,6 @@ asmlinkage void __init cf_early_init(voi
+ 		strcpy(m68k_command_line, DEFAULT_COMMAND_LINE);
+ #endif
+ 	}
+-#endif
+-/* JKM -- temporary! */
+-strcpy(m68k_command_line, DEFAULT_COMMAND_LINE);
+-/* JKM -- temporary! */
+ 
+ #if defined(CONFIG_BLK_DEV_INITRD)
+ 	/* add initrd image */
diff --git a/target/linux/coldfire/patches/074-mcfv4e_except_vector_fix.patch b/target/linux/coldfire/patches/074-mcfv4e_except_vector_fix.patch
new file mode 100644
index 0000000000..9956ba71b7
--- /dev/null
+++ b/target/linux/coldfire/patches/074-mcfv4e_except_vector_fix.patch
@@ -0,0 +1,56 @@
+From 09895934aaddf4f08345798068b41344068c7b56 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 8 Jul 2008 00:59:38 -0600
+Subject: [PATCH] Fix exception handling to properly get vector.
+
+LTIBName: mcfv4e-except-vector-fix
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/traps.c |   11 ++++++-----
+ 1 files changed, 6 insertions(+), 5 deletions(-)
+
+--- a/arch/m68k/coldfire/traps.c
++++ b/arch/m68k/coldfire/traps.c
+@@ -7,6 +7,7 @@
+  *  68040 fixes by Martin Apel
+  *  68060 fixes by Roman Hodek
+  *  68060 fixes by Jesper Skov
++ *  Coldfire fixes by Kurt Mahan
+  *
+  * This file is subject to the terms and conditions of the GNU General Public
+  * License.  See the file COPYING in the main directory of this archive
+@@ -288,13 +289,13 @@ void show_stack(struct task_struct *task
+ void bad_super_trap(struct frame *fp)
+ {
+ 	console_verbose();
+-	if (fp->ptregs.vector < 4*sizeof(vec_names)/sizeof(vec_names[0]))
++	if (fp->ptregs.vector < sizeof(vec_names)/sizeof(vec_names[0]))
+ 		printk(KERN_WARNING "*** %s ***   FORMAT=%X\n",
+-			vec_names[(fp->ptregs.vector) >> 2],
++			vec_names[fp->ptregs.vector],
+ 			fp->ptregs.format);
+ 	else
+ 		printk(KERN_WARNING "*** Exception %d ***   FORMAT=%X\n",
+-			(fp->ptregs.vector) >> 2,
++			fp->ptregs.vector,
+ 			fp->ptregs.format);
+ 	printk(KERN_WARNING "Current process id is %d\n", current->pid);
+ 	die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0);
+@@ -306,7 +307,7 @@ asmlinkage void trap_c(struct frame *fp)
+ 	siginfo_t info;
+ 
+ 	if (fp->ptregs.sr & PS_S) {
+-		if ((fp->ptregs.vector >> 2) == VEC_TRACE) {
++		if (fp->ptregs.vector == VEC_TRACE) {
+ 			/* traced a trapping instruction */
+ 			current->ptrace |= PT_DTRACE;
+ 		} else
+@@ -315,7 +316,7 @@ asmlinkage void trap_c(struct frame *fp)
+ 	}
+ 
+ 	/* send the appropriate signal to the user program */
+-	switch ((fp->ptregs.vector) >> 2) {
++	switch (fp->ptregs.vector) {
+ 	case VEC_ADDRERR:
+ 		info.si_code = BUS_ADRALN;
+ 		sig = SIGBUS;
diff --git a/target/linux/coldfire/patches/075-mcfv4e_watchdog.patch b/target/linux/coldfire/patches/075-mcfv4e_watchdog.patch
new file mode 100644
index 0000000000..5b865bdd32
--- /dev/null
+++ b/target/linux/coldfire/patches/075-mcfv4e_watchdog.patch
@@ -0,0 +1,265 @@
+From 3c6c80a04d6ca99c4f9fbb5e4f279bd644b2df48 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 8 Jul 2008 14:10:46 -0600
+Subject: [PATCH] Add Coldfire Watchdog support.
+
+LTIBName: mcfv4e-watchdog
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/watchdog/Kconfig   |    9 ++
+ drivers/watchdog/Makefile  |    1 +
+ drivers/watchdog/mcf_wdt.c |  220 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 230 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/watchdog/mcf_wdt.c
+
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -672,6 +672,15 @@ config TXX9_WDT
+ 
+ # PARISC Architecture
+ 
++# ColdFire Architecture
++
++config COLDFIRE_WATCHDOG
++	tristate "ColdFire watchdog support"
++	depends on WATCHDOG
++	help
++	  To compile this driver as a module, choose M here: the
++	  module will be called softdog.
++
+ # POWERPC Architecture
+ 
+ config MPC5200_WDT
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -86,6 +86,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
+ # M32R Architecture
+ 
+ # M68K Architecture
++obj-$(CONFIG_COLDFIRE_WATCHDOG) += mcf_wdt.o
+ 
+ # M68KNOMMU Architecture
+ 
+--- /dev/null
++++ b/drivers/watchdog/mcf_wdt.c
+@@ -0,0 +1,220 @@
++/*
++ * drivers/watchdog/mcf_wdt.c
++ *
++ * Watchdog driver for ColdFire processors
++ *
++ * Adapted from the IXP4xx watchdog driver.
++ * The original version carries these notices:
++ *
++ * Author: Deepak Saxena <dsaxena@plexity.net>
++ *
++ * Copyright 2004 (c) MontaVista, Software, Inc.
++ * Based on sa1100 driver, Copyright (C) 2000 Oleg Drokin <green@crimea.edu>
++ *
++ * This file is licensed under  the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/fs.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/init.h>
++#include <linux/bitops.h>
++
++#include <asm-m68k/uaccess.h>
++#include <asm-m68k/coldfire.h>
++#include <asm-m68k/m5485gpt.h>
++
++static int nowayout;
++static unsigned int heartbeat = 30;	/* (secs) Default is 0.5 minute */
++static unsigned long wdt_status;
++
++#define	WDT_IN_USE		0
++#define	WDT_OK_TO_CLOSE		1
++
++static unsigned long wdt_tick_rate;
++
++static void
++wdt_enable(void)
++{
++	MCF_GPT_GMS0 = 0;
++	MCF_GPT_GCIR0 =  MCF_GPT_GCIR_PRE(heartbeat*wdt_tick_rate) |
++				MCF_GPT_GCIR_CNT(0xffff);
++	MCF_GPT_GMS0 = MCF_GPT_GMS_OCPW(0xA5) | MCF_GPT_GMS_WDEN |
++				MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS_GPIO;
++}
++
++static void
++wdt_disable(void)
++{
++	MCF_GPT_GMS0 = 0;
++}
++
++static void
++wdt_keepalive(void)
++{
++	MCF_GPT_GMS0 = MCF_GPT_GMS_OCPW(0xA5) | MCF_GPT_GMS0;
++}
++
++static int
++mcf_wdt_open(struct inode *inode, struct file *file)
++{
++	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
++		return -EBUSY;
++
++	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
++
++	wdt_enable();
++
++	return nonseekable_open(inode, file);
++}
++
++static ssize_t
++mcf_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
++{
++	if (len) {
++		if (!nowayout) {
++			size_t i;
++
++			clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
++
++			for (i = 0; i != len; i++) {
++				char c;
++
++				if (get_user(c, data + i))
++					return -EFAULT;
++				if (c == 'V')
++					set_bit(WDT_OK_TO_CLOSE, &wdt_status);
++			}
++		}
++		wdt_keepalive();
++	}
++
++	return len;
++}
++
++
++static struct watchdog_info ident = {
++	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
++				WDIOF_KEEPALIVEPING,
++	.identity	= "Coldfire Watchdog",
++};
++
++static int
++mcf_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
++			unsigned long arg)
++{
++	int ret = -ENOIOCTLCMD;
++	int time;
++
++	switch (cmd) {
++	case WDIOC_GETSUPPORT:
++		ret = copy_to_user((struct watchdog_info *)arg, &ident,
++				   sizeof(ident)) ? -EFAULT : 0;
++		break;
++
++	case WDIOC_GETSTATUS:
++		ret = put_user(0, (int *)arg);
++		break;
++
++	case WDIOC_GETBOOTSTATUS:
++		ret = put_user(0, (int *)arg);
++		break;
++
++	case WDIOC_SETTIMEOUT:
++		ret = get_user(time, (int *)arg);
++		if (ret)
++			break;
++
++		if (time <= 0 || time > 30) {
++			ret = -EINVAL;
++			break;
++		}
++
++		heartbeat = time;
++		wdt_enable();
++		/* Fall through */
++
++	case WDIOC_GETTIMEOUT:
++		ret = put_user(heartbeat, (int *)arg);
++		break;
++
++	case WDIOC_KEEPALIVE:
++		wdt_keepalive();
++		ret = 0;
++		break;
++	}
++
++	return ret;
++}
++
++static int
++mcf_wdt_release(struct inode *inode, struct file *file)
++{
++	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
++		wdt_disable();
++	} else {
++		printk(KERN_CRIT "WATCHDOG: Device closed unexpectdly - "
++					"timer will not stop\n");
++	}
++
++	clear_bit(WDT_IN_USE, &wdt_status);
++	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
++
++	return 0;
++}
++
++
++static struct file_operations mcf_wdt_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.write		= mcf_wdt_write,
++	.ioctl		= mcf_wdt_ioctl,
++	.open		= mcf_wdt_open,
++	.release	= mcf_wdt_release,
++};
++
++static struct miscdevice mcf_wdt_miscdev = {
++	.minor		= WATCHDOG_MINOR,
++	.name		= "watchdog",
++	.fops		= &mcf_wdt_fops,
++};
++
++static int __init mcf_wdt_init(void)
++{
++	wdt_tick_rate = MCF_BUSCLK/0xffff;
++#ifdef CONFIG_WATCHDOG_NOWAYOUT
++	nowayout = 1;
++#else
++	nowayout = 0;
++#endif
++	printk("ColdFire watchdog driver is loaded.\n");
++
++	return misc_register(&mcf_wdt_miscdev);
++}
++
++static void __exit mcf_wdt_exit(void)
++{
++	misc_deregister(&mcf_wdt_miscdev);
++}
++
++module_init(mcf_wdt_init);
++module_exit(mcf_wdt_exit);
++
++MODULE_AUTHOR("Deepak Saxena");
++MODULE_DESCRIPTION("ColdFire Watchdog");
++
++module_param(heartbeat, int, 0);
++MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 60s)");
++
++module_param(nowayout, int, 0);
++MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
++
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
++
diff --git a/target/linux/coldfire/patches/076-mcfv4e_irda.patch b/target/linux/coldfire/patches/076-mcfv4e_irda.patch
new file mode 100644
index 0000000000..0452a47b24
--- /dev/null
+++ b/target/linux/coldfire/patches/076-mcfv4e_irda.patch
@@ -0,0 +1,237 @@
+From 5f645d0668b469c4738fe1e9d3994287a519d0f3 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 8 Jul 2008 15:57:47 -0600
+Subject: [PATCH] Add Coldfire IRDA support in serial driver.
+
+LTIBName: mcfv4e-irda
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+Signed-off-by: Huan, Wang <b18965@freescale.com>
+---
+ drivers/serial/Kconfig     |    6 ++
+ drivers/serial/mcfserial.c |  110 ++++++++++++++++++++++++++++++++++++++++++--
+ net/irda/irlap.c           |    2 +-
+ 3 files changed, 113 insertions(+), 5 deletions(-)
+
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -979,6 +979,12 @@ config SERIAL_COLDFIRE
+ 	  This driver supports the built-in serial ports of the Motorola ColdFire
+ 	  family of CPUs.
+ 
++config SERIAL_COLDFIRE_IRDA
++	bool "ColdFire IRDA support"
++	depends on SERIAL_COLDFIRE
++	help
++	  This driver supports IRDA on the Motorola ColdFire.
++
+ config SERIAL_MCF
+ 	bool "Coldfire serial support (new style driver)"
+ 	depends on COLDFIRE
+--- a/drivers/serial/mcfserial.c
++++ b/drivers/serial/mcfserial.c
+@@ -109,6 +109,10 @@ static struct tty_driver *mcfrs_serial_d
+ #define	IRQBASE	73
+ #endif
+ 
++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
++#define SERIAL_IRDA_LINE (2)
++#endif
++
+ /*
+  *	Configuration table, UARTs to look for at startup.
+  */
+@@ -393,6 +397,9 @@ static inline void receive_chars(struct 
+ static inline void transmit_chars(struct mcf_serial *info)
+ {
+ 	volatile unsigned char	*uartp;
++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
++	int i;
++#endif
+ 
+ 	uartp = info->addr;
+ 
+@@ -404,13 +411,36 @@ static inline void transmit_chars(struct
+ 	}
+ 
+ 	if ((info->xmit_cnt <= 0) || info->tty->stopped) {
++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
++		if (info->line == SERIAL_IRDA_LINE) {
++			/* Enable receiver for IRDA */
++			uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX;
++			/* reset RX */
++			uartp[MCFUART_UCR] = MCFUART_UCR_TXENABLE | MCFUART_UCR_RXENABLE;
++		}
++#endif
+ 		info->imr &= ~MCFUART_UIR_TXREADY;
+ 		uartp[MCFUART_UIMR] = info->imr;
+ 		return;
+ 	}
+ 
+ 	while (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) {
++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
++		if (info->line == SERIAL_IRDA_LINE) {
++			while (!(uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY));
++			i = 0;
++			/* delay for settle */
++#if defined(CONFIG_M548X)
++			udelay(1);
++#elif defined(CONFIG_M547X)
++			udelay(2);
++#else
++			while (i++ < 25000) udelay(1);
++#endif
++		}
++#endif
+ 		uartp[MCFUART_UTB] = info->xmit_buf[info->xmit_tail++];
++
+ 		info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
+ 		info->stats.tx++;
+ 		if (--info->xmit_cnt <= 0)
+@@ -567,6 +597,28 @@ static int startup(struct mcf_serial * i
+ 	 */
+ 	mcfrs_change_speed(info);
+ 
++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
++	if (info->line == SERIAL_IRDA_LINE) {
++		/* Put PSC in IrDA mode */
++		MCF_PSC_SICR(info->line) = MCF_PSC_SICR_SIM_SIR;
++
++		/* Set pulse width to 1.6 uS */
++		MCF_PSC_IRSDR(info->line) = (uint8_t)
++					    (16 * (CONFIG_MCFCLK / 10000000));
++		MCF_PSC_IRCR1(info->line) = MCF_PSC_IRCR1_SPUL;
++		MCF_PSC_IRCR2(info->line) = 0;
++
++		/* Enable RTS to send */
++		MCF_PSC_OPSET(info->line) = MCF_PSC_OPSET_RTS;
++
++		/* Setup FIFO Alarms */
++		MCF_PSC_RFAR(info->line) = MCF_PSC_RFAR_ALARM(248);
++		MCF_PSC_TFAR(info->line) = MCF_PSC_TFAR_ALARM(248);
++
++		MCF_PSC_RFCR(info->line) = MCF_PSC_RFCR_FRMEN | MCF_PSC_RFCR_GR(4);
++		MCF_PSC_TFCR(info->line) = MCF_PSC_TFCR_FRMEN | MCF_PSC_RFCR_GR(4);
++	}
++#endif
+ 	/*
+ 	 * Lastly enable the UART transmitter and receiver, and
+ 	 * interrupt enables.
+@@ -588,10 +640,20 @@ static void shutdown(struct mcf_serial *
+ {
+ 	volatile unsigned char	*uartp;
+ 	unsigned long		flags;
++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
++	unsigned long 		delay_counter = 0;
++#endif
+ 
+ 	if (!(info->flags & ASYNC_INITIALIZED))
+ 		return;
+-
++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
++	uartp = (volatile unsigned char *) info->addr;
++	while (!(uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY)) {
++		if(delay_counter++ > 25000)
++			break;
++		udelay(10);
++	}
++#endif
+ #ifdef SERIAL_DEBUG_OPEN
+ 	printk("Shutting down serial port %d (irq %d)....\n", info->line,
+ 	       info->irq);
+@@ -820,10 +882,19 @@ static int mcfrs_write(struct tty_struct
+ 
+ 	local_irq_disable();
+ 	uartp = info->addr;
++
++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
++	if (info->line == SERIAL_IRDA_LINE) {
++		/* Disable IRDA receiver*/
++		uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX;    /* reset RX */
++		uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX;    /* reset TX */
++
++		uartp[MCFUART_UCR] = MCFUART_UCR_TXENABLE;
++	}
++#endif
+ 	info->imr |= MCFUART_UIR_TXREADY;
+ 	uartp[MCFUART_UIMR] = info->imr;
+ 	local_irq_restore(flags);
+-
+ 	return total;
+ }
+ 
+@@ -884,9 +955,21 @@ static void mcfrs_throttle(struct tty_st
+ 
+ 	if (serial_paranoia_check(info, tty->name, "mcfrs_throttle"))
+ 		return;
+-	
++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
++	if (I_IXOFF(tty)) {
++		/* Force STOP_CHAR (xoff) out */
++		volatile unsigned char	*uartp;
++		unsigned long		flags;
++		uartp = (volatile unsigned char *) info->addr;
++		local_irq_save(flags);
++		info->imr |= MCFUART_UIR_TXREADY;
++		uartp[MCFUART_UIMR] = info->imr;
++		local_irq_restore(flags);
++	}
++#else
+ 	if (I_IXOFF(tty))
+ 		info->x_char = STOP_CHAR(tty);
++#endif
+ 
+ 	/* Turn off RTS line (do this atomic) */
+ }
+@@ -907,8 +990,22 @@ static void mcfrs_unthrottle(struct tty_
+ 	if (I_IXOFF(tty)) {
+ 		if (info->x_char)
+ 			info->x_char = 0;
++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
++		else {
++			/* Force START_CHAR (xon) out */
++			volatile unsigned char	*uartp;
++			unsigned long		flags;
++			info->x_char = START_CHAR(tty);
++			uartp = (volatile unsigned char *) info->addr;
++			local_irq_save(flags);
++			info->imr |= MCFUART_UIR_TXREADY;
++			uartp[MCFUART_UIMR] = info->imr;
++			local_irq_restore(flags);
++		}
++#else
+ 		else
+ 			info->x_char = START_CHAR(tty);
++#endif
+ 	}
+ 
+ 	/* Assert RTS line (do this atomic) */
+@@ -1156,12 +1253,17 @@ static int mcfrs_ioctl(struct tty_struct
+ static void mcfrs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+ {
+ 	struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
++	int i = 0;	/* hush GCC */
++#endif
+ 
+ 	if (tty->termios->c_cflag == old_termios->c_cflag)
+ 		return;
+ 
++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
++	while (i++ < 35000) udelay(1);
++#endif
+ 	mcfrs_change_speed(info);
+-
+ 	if ((old_termios->c_cflag & CRTSCTS) &&
+ 	    !(tty->termios->c_cflag & CRTSCTS)) {
+ 		tty->hw_stopped = 0;
+--- a/net/irda/irlap.c
++++ b/net/irda/irlap.c
+@@ -627,7 +627,7 @@ void irlap_status_indication(struct irla
+ {
+ 	switch (quality_of_link) {
+ 	case STATUS_NO_ACTIVITY:
+-		IRDA_MESSAGE("IrLAP, no activity on link!\n");
++		/* IRDA_MESSAGE("IrLAP, no activity on link!\n"); */
+ 		break;
+ 	case STATUS_NOISY:
+ 		IRDA_MESSAGE("IrLAP, noisy link!\n");
diff --git a/target/linux/coldfire/patches/077-mcfv4e_flexcan.patch b/target/linux/coldfire/patches/077-mcfv4e_flexcan.patch
new file mode 100644
index 0000000000..ae7aefd649
--- /dev/null
+++ b/target/linux/coldfire/patches/077-mcfv4e_flexcan.patch
@@ -0,0 +1,1376 @@
+From c44de58d0972d05851512ba8cbd928b7adef5187 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 8 Jul 2008 17:11:33 -0600
+Subject: [PATCH] Add FlexCAN support.
+
+LTIBName: mcfv4e-flexcan
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+Signed-off-by: Huan Wang <b18965@freescale.com>
+---
+ drivers/net/can/Kconfig               |   13 ++
+ drivers/net/can/Makefile              |    1 +
+ drivers/net/can/flexcan/Makefile      |    5 +
+ drivers/net/can/flexcan/flexcan.c     |  378 +++++++++++++++++++++++++++++++++
+ drivers/net/can/flexcan/flexcan.h     |  148 +++++++++++++
+ drivers/net/can/flexcan/mcf548x_can.c |  213 ++++++++++++++++++
+ include/asm-m68k/m5485sim.h           |    2 +
+ include/linux/can/dev.h               |   62 ++++++
+ include/linux/can/ioctl.h             |  152 +++++++++++++
+ include/linux/can/version.h           |   22 ++
+ net/can/Makefile                      |    3 +
+ net/can/dev.c                         |  292 +++++++++++++++++++++++++
+ 12 files changed, 1291 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/net/can/flexcan/Makefile
+ create mode 100644 drivers/net/can/flexcan/flexcan.c
+ create mode 100644 drivers/net/can/flexcan/flexcan.h
+ create mode 100644 drivers/net/can/flexcan/mcf548x_can.c
+ create mode 100644 include/linux/can/dev.h
+ create mode 100644 include/linux/can/ioctl.h
+ create mode 100644 include/linux/can/version.h
+ create mode 100644 net/can/dev.c
+
+--- a/drivers/net/can/Kconfig
++++ b/drivers/net/can/Kconfig
+@@ -12,6 +12,19 @@ config CAN_VCAN
+ 	  This driver can also be built as a module.  If so, the module
+ 	  will be called vcan.
+ 
++config CAN_FLEXCAN
++	tristate "Support for Freescale FLEXCAN based chips"
++	depends on CAN && (PPC || M68K || M68KNOMMU)
++	---help---
++	  Say Y here if you want to support for Freescale FlexCAN.
++
++config CAN_MCF547X_8X
++	tristate "Freescale MCF547X/MCF548X onboard CAN controller"
++	depends on CAN_FLEXCAN && (M547X || M548X)
++	---help---
++	  Say Y here if you want to support for Freescale MCF547x/MCF548x
++	  onboard dualCAN controller.
++
+ config CAN_DEBUG_DEVICES
+ 	bool "CAN devices debugging messages"
+ 	depends on CAN
+--- a/drivers/net/can/Makefile
++++ b/drivers/net/can/Makefile
+@@ -3,3 +3,4 @@
+ #
+ 
+ obj-$(CONFIG_CAN_VCAN)		+= vcan.o
++obj-$(CONFIG_CAN_FLEXCAN)	+= flexcan/
+--- /dev/null
++++ b/drivers/net/can/flexcan/Makefile
+@@ -0,0 +1,5 @@
++
++obj-$(CONFIG_CAN_MCF547X_8X)	+= flexcan-mcf548x.o
++
++flexcan-mcf548x-objs	:= flexcan.o mcf548x_can.o
++
+--- /dev/null
++++ b/drivers/net/can/flexcan/flexcan.c
+@@ -0,0 +1,378 @@
++/*
++ * flexcan.c
++ *
++ * DESCRIPTION:
++ *  CAN bus driver for the alone generic (as possible as) FLEXCAN controller.
++ *
++ * AUTHOR:
++ *  Andrey Volkov <avolkov@varma-el.com>
++ *
++ * COPYRIGHT:
++ *  2005-2006, Varma Electronics Oy
++ *
++ * LICENCE:
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License, or
++ *  (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ *  HISTORY:
++ *  	2008-06-23 Support for MCF548x's FlexCAN
++ * 			Huan, Wang <b18965@freescale.com>
++ */
++
++
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/netdevice.h>
++#include <linux/if_arp.h>
++#include <linux/if_ether.h>
++#include <linux/can.h>
++#include <linux/list.h>
++#include <linux/io.h>
++
++#include <linux/can/dev.h>
++#include <linux/can/error.h>
++#include "flexcan.h"
++#include <asm/coldfire.h>
++#include <asm/m5485sim.h>
++#include <linux/can/version.h>	/* for RCSID. Removed by mkpatch script */
++RCSID("$Id$");
++
++struct flexcan_priv {
++	struct can_priv can;
++	volatile unsigned long flags;
++	u8 shadow_statflg;
++	u8 shadow_canrier;
++	u8 cur_pri;
++	u8 tx_active;
++
++	struct list_head tx_head;
++	struct napi_struct napi;
++	struct net_device *dev;
++};
++
++
++static int flexcan_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	struct can_frame *frame = (struct can_frame *)skb->data;
++	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
++	int i, len;
++	int txbuf = 0;
++	u32 can_id, can_ext, tmp, tmp1;
++
++	/* Transmission inactive */
++	regs->cantxfg[txbuf].can_dlc = MB_CNT_CODE(0x08);
++
++	can_ext = frame->can_id;
++	if (can_ext & CAN_EFF_FLAG) {
++		/* Frame format is extended */
++		regs->cantxfg[txbuf].can_dlc |= (1 << 21);
++		regs->cantxfg[txbuf].can_dlc |= (1 << 22);
++		can_id = frame->can_id & MB_ID_EXT;
++		if (frame->can_id & CAN_RTR_FLAG)
++			regs->cantxfg[txbuf].can_dlc |= (1 << 20);
++
++		tmp = (can_id & CAN_SFF_MASK) << 18;
++		tmp1 = can_id >> 11;
++		can_id = tmp | tmp1;
++		regs->cantxfg[txbuf].can_id = can_id;
++	} else {
++		/* Frame format is standard */
++		can_id = frame->can_id & MB_ID_EXT;
++		if (frame->can_id & CAN_RTR_FLAG)
++			regs->cantxfg[txbuf].can_dlc |= (1 << 20);
++
++		regs->cantxfg[txbuf].can_id = can_id << 18;
++	}
++
++	len = 8;
++	for (i = 0; i < len; i++)
++		regs->cantxfg[txbuf].data[i] = frame->data[i];
++
++	regs->cantxfg[txbuf].can_dlc |= len << 16;
++	/* Transmission active */
++	regs->cantxfg[txbuf].can_dlc |= MB_CNT_CODE(0x0c);
++	kfree_skb(skb);
++	return NETDEV_TX_OK;
++}
++
++static void flexcan_tx_timeout(struct net_device *dev)
++{
++	struct sk_buff *skb;
++	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
++	struct can_frame *frame;
++	int length = 8;
++
++	/* Diable the interrupts */
++	regs->imask = IMASK_BUFF_DISABLE_ALL;
++
++	skb = dev_alloc_skb(sizeof(struct can_frame));
++	if (!skb) {
++		if (printk_ratelimit())
++			dev_notice(ND2D(dev), "TIMEOUT packet dropped.\n");
++		return;
++	}
++	frame = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
++
++	frame->can_dlc = length;
++
++	skb->dev = dev;
++	skb->protocol = __constant_htons(ETH_P_CAN);
++	skb->pkt_type = PACKET_BROADCAST;
++	skb->ip_summed = CHECKSUM_UNNECESSARY;
++
++	netif_rx(skb);
++}
++
++static irqreturn_t flexcan_isr(int irq, void *dev_id)
++{
++	struct net_device *dev = (struct net_device *)dev_id;
++	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
++	struct net_device_stats *stats = dev->get_stats(dev);
++	struct sk_buff *skb;
++	struct can_frame *frame;
++	u32 iflags, oflags;
++	int i, k;
++	int retval = 1;
++
++	iflags = regs->iflag;
++	oflags = iflags;
++	for (i = 0; i < 16; i++) {
++		if (iflags & (0x01 << i)) {
++			struct flexcan_mb *mb = &regs->cantxfg[i];
++			int ctrl = mb->can_dlc;
++			int code = (ctrl >> 24) & 0x0f;
++			int length = (ctrl >> 16) & 0x0f;
++			u32 tmp, tmp1;
++
++			if (code < 8 && (length > 0)) {
++				/* receive frame */
++				skb = dev_alloc_skb(sizeof(struct can_frame));
++				if (!skb)
++					dev_notice(ND2D(dev),
++							"Packets dropped.\n");
++				skb->dev = dev;
++				frame = (struct can_frame *)skb_put(skb,
++						sizeof(struct can_frame));
++
++				frame->can_id &= 0x0;
++				frame->can_dlc = length;
++				tmp1 = mb->can_id & MB_ID_EXT;
++				if (ctrl & MB_CNT_IDE) {
++					tmp = tmp1;
++					tmp = (tmp >> 18) & CAN_SFF_MASK;
++					frame->can_id = (tmp1 << 11) | tmp;
++					frame->can_id &= CAN_EFF_MASK;
++					frame->can_id |= CAN_EFF_FLAG;
++					if (ctrl & MB_CNT_RTR)
++						frame->can_id |= CAN_RTR_FLAG;
++				} else {
++					frame->can_id  = tmp1 >> 18;
++					if (ctrl & MB_CNT_RTR)
++						frame->can_id |= CAN_RTR_FLAG;
++				}
++
++				for (k = 0; k < 8; k++)
++					frame->data[k] = mb->data[k];
++
++				mb->can_dlc &= MB_CODE_MASK;
++				mb->can_dlc |= MB_CNT_CODE(0x04);
++
++				stats->rx_packets++;
++				stats->rx_bytes += frame->can_dlc;
++				skb->dev = dev;
++				skb->protocol = __constant_htons(ETH_P_CAN);
++				skb->ip_summed = CHECKSUM_UNNECESSARY;
++
++				retval = netif_rx(skb);
++				if (retval == NET_RX_DROP)
++					dev_notice(ND2D(dev),
++							"Packets dropped.\n");
++			} else {
++				/* transmit frame */
++				mb->can_dlc = MB_CNT_CODE(0x04);
++			}
++		}
++	}
++	regs->iflag = oflags;
++
++	return IRQ_HANDLED;
++}
++
++static int flexcan_do_set_bit_time(struct net_device *dev,
++				 struct can_bittime *bt)
++{
++	struct flexcan_priv *priv = netdev_priv(dev);
++	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
++	int ret = 0;
++	u32 reg;
++
++	if (bt->type != CAN_BITTIME_STD)
++		return -EINVAL;
++
++	spin_lock_irq(&priv->can.irq_lock);
++
++	reg = CANCTRL_PRESDIV(bt->std.brp) | CANCTRL_PSEG1(bt->std.phase_seg1
++			- 1) | CANCTRL_PSEG2(bt->std.phase_seg2 - 1);
++	regs->canctrl &= CANCTRL_BITTIME;
++	regs->canctrl |= (reg | CANCTRL_SAMP(bt->std.sam) |
++		CANCTRL_PROPSEG(bt->std.prop_seg - 1));
++
++	spin_unlock_irq(&priv->can.irq_lock);
++	return ret;
++}
++
++
++static int flexcan_open(struct net_device *dev)
++{
++	int ret, i, j;
++	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
++
++#if defined(CONFIG_M547X_8X)
++	MCF_PAR_TIMER = MCF_PAR_TIMER | 0x28;
++	MCF_PAR_TIMER = MCF_PAR_TIMER & 0xf8;
++	MCF_PAR_DSPI = MCF_PAR_DSPI | 0x0a00;
++	MCF_PAR_FECI2CIRQ = MCF_PAR_FECI2CIRQ | 0x0283;
++	MCF_PAR_PSCn(2) = MCF_PAR_PSCn(2) & 0x0f;
++	MCF_PAR_PSCn(2) = MCF_PAR_PSCn(2) | 0x50;
++#endif
++
++	regs->canmcr |= CANMCR_SOFTRST;
++	regs->canmcr |= CANMCR_MDIS;
++	udelay(10);
++
++	if ((regs->canmcr & CANMCR_SOFTRST) != 0x0) {
++		dev_err(ND2D(dev), "Failed to softreset can module.\n");
++		return -1;
++	}
++
++	/* Enable error and bus off interrupt */
++	regs->canctrl |= (CANCTRL_RJW(3) | CANCTRL_ERRMSK |
++			CANCTRL_BOFFMSK);
++
++	/* Set lowest buffer transmitted first */
++	regs->canctrl |= CANCTRL_LBUF;
++
++	for (i = 0; i < 16; i++) {
++		regs->cantxfg[i].can_dlc = 0;
++		regs->cantxfg[i].can_id = 0;
++		for (j = 0; j < 8; j++)
++			regs->cantxfg[i].data[j] = 0;
++
++		/* Put MB into rx queue */
++		regs->cantxfg[i].can_dlc = MB_CNT_CODE(0x04);
++	}
++
++	/* acceptance mask/acceptance code (accept everything) */
++	regs->rxgmask = 0x00000000;
++	regs->rx14mask = 0x00000000;
++	regs->rx15mask = 0x00000000;
++	/* extended frame */
++	regs->cantxfg[14].can_dlc |= 0x600000;
++	/* Enable flexcan module */
++	regs->canmcr &= ~CANMCR_MDIS;
++	/* Synchronize with the can bus */
++	regs->canmcr &= ~CANMCR_HALT;
++
++#if defined(CONFIG_M547X_8X)
++	for (i = 0; i < 2; i++) {
++		MCF_ICR(ISC_CANn_MBOR(i)) = 0x33;
++		MCF_ICR(ISC_CANn_ERR(i)) = 0x33;
++		MCF_ICR(ISC_CANn_BUSOFF(i)) = 0x33;
++	}
++
++	ret = request_irq(dev->irq + 64, flexcan_isr, IRQF_DISABLED,
++			dev->name, dev);
++	ret = request_irq(dev->irq + 1 + 64, flexcan_isr, IRQF_DISABLED,
++			dev->name, dev);
++	ret = request_irq(dev->irq + 2 + 64, flexcan_isr, IRQF_DISABLED,
++			dev->name, dev);
++	if (ret < 0) {
++		printk(KERN_ERR "%s - failed to attach interrupt.\n",
++		       dev->name);
++		return ret;
++	}
++#endif
++
++	/* Enable all interrupts */
++	regs->imask = IMASK_BUFF_ENABLE_ALL;
++	netif_start_queue(dev);
++	return 0;
++}
++
++static int flexcan_close(struct net_device *dev)
++{
++	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
++
++	netif_stop_queue(dev);
++
++	/* Disable all interrupts */
++	regs->imask = IMASK_BUFF_DISABLE_ALL;
++	free_irq(dev->irq + 64, dev);
++	free_irq(dev->irq + 1 + 64, dev);
++	free_irq(dev->irq + 2 + 64, dev);
++
++	/* Disable module */
++	regs->canmcr |= CANMCR_MDIS;
++	return 0;
++}
++
++int register_flexcandev(struct net_device *dev, int clock_src)
++{
++	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
++
++	regs->canmcr &= ~CANMCR_MDIS;
++	udelay(100);
++	regs->canmcr |= (CANMCR_FRZ | CANMCR_HALT);
++	return register_netdev(dev);
++}
++EXPORT_SYMBOL(register_flexcandev);
++
++void unregister_flexcandev(struct net_device *dev)
++{
++	struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr;
++
++	regs->canmcr |= (CANMCR_FRZ | CANMCR_HALT);
++	regs->canmcr |= CANMCR_MDIS;
++
++	unregister_netdev(dev);
++}
++EXPORT_SYMBOL(unregister_flexcandev);
++
++struct net_device *alloc_flexcandev(void)
++{
++	struct net_device *dev;
++	struct flexcan_priv *priv;
++
++	dev = alloc_candev(sizeof(struct flexcan_priv));
++	if (!dev)
++		return NULL;
++
++	priv = netdev_priv(dev);
++	priv->dev = dev;
++	dev->open = flexcan_open;
++	dev->stop = flexcan_close;
++	dev->hard_start_xmit = flexcan_hard_start_xmit;
++	dev->tx_timeout = flexcan_tx_timeout;
++	dev->flags |= IFF_NOARP;
++	priv->can.do_set_bit_time = flexcan_do_set_bit_time;
++	return dev;
++}
++EXPORT_SYMBOL(alloc_flexcandev);
++
++MODULE_AUTHOR("Andrey Volkov <avolkov@varma-el.com>");
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("CAN port driver for flexcan based chip");
+--- /dev/null
++++ b/drivers/net/can/flexcan/flexcan.h
+@@ -0,0 +1,148 @@
++/*
++ * flexcan.h
++ *
++ * DESCRIPTION:
++ *  Definitions of consts/structs to drive the Freescale FLEXCAN.
++ *
++ */
++
++#ifndef __FLEXCAN_H__
++#define __FLEXCAN_H__
++
++#include <linux/autoconf.h>
++#include <linux/types.h>
++
++/* FLEXCAN module configuration register (CANMCR) bits */
++#define CANMCR_MDIS				0x80000000
++#define CANMCR_FRZ				0x40000000
++#define CANMCR_HALT				0x10000000
++#define CANMCR_SOFTRST				0x02000000
++#define CANMCR_FRZACK				0x01000000
++#define CANMCR_SUPV				0x00800000
++#define CANMCR_MAXMB(x)				((x)&0x0f)
++
++/* FLEXCAN control register (CANCTRL) bits */
++#define CANCTRL_PRESDIV(x)			(((x)&0xff)<<24)
++#define CANCTRL_RJW(x)				(((x)&0x03)<<22)
++#define CANCTRL_PSEG1(x)			(((x)&0x07)<<19)
++#define CANCTRL_PSEG2(x)			(((x)&0x07)<<16)
++#define CANCTRL_BOFFMSK				0x00008000
++#define CANCTRL_ERRMSK				0x00004000
++#define CANCTRL_LPB				0x00001000
++#define CANCTRL_SAMP(x)				(((x)&0x1)<<7)
++#define CANCTRL_BOFFREC				0x00000040
++#define CANCTRL_TSYNC				0x00000020
++#define CANCTRL_LBUF				0x00000010
++#define CANCTRL_LOM				0x00000008
++#define CANCTRL_PROPSEG(x)			((x)&0x07)
++#define CANCTRL_BITTIME				0x00c0d078
++
++/* FLEXCAN error counter register (ERRCNT) bits */
++#define ERRCNT_REXECTR(x)			(((x)&0xff)<<8)
++#define ERRCNT_TXECTR(x)			((x)&0xff)
++
++/* FLEXCAN error and status register (ERRSTAT) bits */
++#define ERRSTAT_BITERR(x)			(((x)&0x03)<<14)
++#define ERRSTAT_ACKERR				0x00002000
++#define ERRSTAT_CRCERR				0x00001000
++#define ERRSTAT_FRMERR				0x00000800
++#define ERRSTAT_STFERR				0x00000400
++#define ERRSTAT_TXWRN				0x00000200
++#define ERRSTAT_RXWRN				0x00000100
++#define ERRSTAT_IDLE 				0x00000080
++#define ERRSTAT_TXRX				0x00000040
++#define ERRSTAT_FLTCONF(x)			(((x)&0x03)<<4)
++#define ERRSTAT_BOFFINT				0x00000004
++#define ERRSTAT_ERRINT          		0x00000002
++
++/* FLEXCAN interrupt mask register (IMASK) bits */
++#define IMASK_BUF15M				0x8000
++#define IMASK_BUF14M				0x4000
++#define IMASK_BUF13M				0x2000
++#define IMASK_BUF12M				0x1000
++#define IMASK_BUF11M				0x0800
++#define IMASK_BUF10M				0x0400
++#define IMASK_BUF9M				0x0200
++#define IMASK_BUF8M				0x0100
++#define IMASK_BUF7M				0x0080
++#define IMASK_BUF6M				0x0040
++#define IMASK_BUF5M				0x0020
++#define IMASK_BUF4M				0x0010
++#define IMASK_BUF3M				0x0008
++#define IMASK_BUF2M				0x0004
++#define IMASK_BUF1M				0x0002
++#define IMASK_BUF0M				0x0001
++#define IMASK_BUFnM(x)				(0x1<<(x))
++#define IMASK_BUFF_ENABLE_ALL			0xffff
++#define IMASK_BUFF_DISABLE_ALL 			0x0000
++
++/* FLEXCAN interrupt flag register (IFLAG) bits */
++#define IFLAG_BUF15M				0x8000
++#define IFLAG_BUF14M				0x4000
++#define IFLAG_BUF13M				0x2000
++#define IFLAG_BUF12M				0x1000
++#define IFLAG_BUF11M				0x0800
++#define IFLAG_BUF10M				0x0400
++#define IFLAG_BUF9M				0x0200
++#define IFLAG_BUF8M				0x0100
++#define IFLAG_BUF7M				0x0080
++#define IFLAG_BUF6M				0x0040
++#define IFLAG_BUF5M				0x0020
++#define IFLAG_BUF4M				0x0010
++#define IFLAG_BUF3M				0x0008
++#define IFLAG_BUF2M				0x0004
++#define IFLAG_BUF1M				0x0002
++#define IFLAG_BUF0M				0x0001
++#define IFLAG_BUFnM(x)				(0x1<<(x))
++#define IFLAG_BUFF_SET_ALL			0xffff
++#define IFLAG_BUFF_DISABLE_ALL 			0x0000
++
++/* FLEXCAN message buffers */
++#define MB_CNT_CODE(x)				(((x)&0x0f)<<24)
++#define MB_CNT_SRR				0x00400000
++#define MB_CNT_IDE				0x00200000
++#define MB_CNT_RTR				0x00100000
++#define MB_CNT_LENGTH(x)			(((x)&0x0f)<<16)
++#define MB_CNT_TIMESTAMP(x)			((x)&0xffff)
++
++#define MB_ID_STD				((0x7ff)<<18)
++#define MB_ID_EXT				0x1fffffff
++#define MB_CODE_MASK				0xf0ffffff
++
++/* Structure of the message buffer */
++struct flexcan_mb {
++	u32	can_dlc;
++	u32	can_id;
++	u8	data[8];
++};
++
++/* Structure of the hardware registers */
++struct flexcan_regs {
++	u32	canmcr;
++	u32	canctrl;
++	u32	timer;
++	u32	reserved1;
++	u32 	rxgmask;
++	u32 	rx14mask;
++	u32 	rx15mask;
++	u32	errcnt;
++	u32 	errstat;
++	u32	reserved2;
++	u32	imask;
++	u32	reserved3;
++	u32 	iflag;
++	u32	reserved4[19];
++	struct	flexcan_mb cantxfg[16];
++};
++
++struct flexcan_platform_data {
++	u8 clock_src;		/* FLEXCAN clock source CRIN or SYSCLK */
++	u32 clock_frq;		/* can ref. clock, in Hz */
++};
++
++struct net_device *alloc_flexcandev(void);
++
++extern int register_flexcandev(struct net_device *dev, int clock_src);
++extern void unregister_flexcandev(struct net_device *dev);
++
++#endif				/* __FLEXCAN_H__ */
+--- /dev/null
++++ b/drivers/net/can/flexcan/mcf548x_can.c
+@@ -0,0 +1,213 @@
++/*
++ * DESCRIPTION:
++ *  CAN bus driver for the Freescale MCF548x embedded CPU.
++ *
++ * AUTHOR:
++ *  Andrey Volkov <avolkov@varma-el.com>
++ *
++ * COPYRIGHT:
++ *  2004-2005, Varma Electronics Oy
++ *
++ * LICENCE:
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License, or
++ *  (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ * HISTORY:
++ * 	2008-06-23 support for MCF548x's FlexCAN
++ * 		Huan, Wang  <b18965@freescale.com>
++ * 	2005-02-03 created
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/netdevice.h>
++#include <linux/can.h>
++#include <linux/can/dev.h>
++#include <linux/io.h>
++
++#include "flexcan.h"
++#include <asm/coldfire.h>
++#include <asm/m5485sim.h>
++#include <linux/can/version.h>	/* for RCSID. Removed by mkpatch script */
++
++RCSID("$Id$");
++
++#define PDEV_MAX 2
++
++struct platform_device *pdev[PDEV_MAX];
++
++static int __devinit mcf548x_can_probe(struct platform_device *pdev)
++{
++	struct resource *mem;
++	struct net_device *dev;
++	struct flexcan_platform_data *pdata = pdev->dev.platform_data;
++	struct can_priv *can;
++	u32 mem_size;
++	int ret = -ENODEV;
++
++	if (!pdata)
++		return ret;
++
++	dev = alloc_flexcandev();
++	if (!dev)
++		return -ENOMEM;
++	can = netdev_priv(dev);
++
++	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++	dev->irq = platform_get_irq(pdev, 0);
++	if (!mem || !dev->irq)
++		goto req_error;
++
++	mem_size = mem->end - mem->start + 1;
++	if (!request_mem_region(mem->start, mem_size, pdev->dev.driver->name)) {
++		dev_err(&pdev->dev, "resource unavailable\n");
++		goto req_error;
++	}
++	SET_NETDEV_DEV(dev, &pdev->dev);
++
++	dev->base_addr = (unsigned long)ioremap_nocache(mem->start, mem_size);
++	if (!dev->base_addr) {
++		dev_err(&pdev->dev, "failed to map can port\n");
++		ret = -ENOMEM;
++		goto fail_map;
++	}
++	can->can_sys_clock = pdata->clock_frq;
++	platform_set_drvdata(pdev, dev);
++	ret = register_flexcandev(dev, pdata->clock_src);
++	if (ret >= 0) {
++		dev_info(&pdev->dev, "probe for port 0x%lX done\n",
++			 dev->base_addr);
++		return ret;
++	}
++
++	iounmap((unsigned long *)dev->base_addr);
++fail_map:
++	release_mem_region(mem->start, mem_size);
++req_error:
++	free_candev(dev);
++	dev_err(&pdev->dev, "probe failed\n");
++	return ret;
++}
++
++static int __devexit mcf548x_can_remove(struct platform_device *pdev)
++{
++	struct net_device *dev = platform_get_drvdata(pdev);
++	struct resource *mem;
++
++	platform_set_drvdata(pdev, NULL);
++	unregister_flexcandev(dev);
++	iounmap((unsigned long *)dev->base_addr);
++
++	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	release_mem_region(mem->start, mem->end - mem->start + 1);
++	free_candev(dev);
++	return 0;
++}
++
++static struct platform_driver mcf548x_can_driver = {
++	.driver = {
++		   .name = "mcf548x-flexcan",
++		   },
++	.probe = mcf548x_can_probe,
++	.remove = __devexit_p(mcf548x_can_remove),
++};
++
++static struct resource mcf548x_can0_resources[] = {
++	[0] = {
++		.start 		= MCF_MBAR + 0x0000A000,
++		.end		= MCF_MBAR + 0x0000A7FF,
++		.flags		= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start		= 49,
++		.end		= 49,
++		.flags		= IORESOURCE_IRQ,
++	},
++};
++
++static struct resource mcf548x_can1_resources[] = {
++	[0] = {
++		.start 		= MCF_MBAR + 0x0000A800,
++		.end		= MCF_MBAR + 0x0000AFFF,
++		.flags		= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start		= 55,
++		.end		= 55,
++		.flags		= IORESOURCE_IRQ,
++	},
++};
++
++
++static int __init mcf548x_of_to_pdev(void)
++{
++	unsigned int i;
++	int err = -ENODEV;
++	struct flexcan_platform_data pdata;
++
++	pdev[0] = platform_device_register_simple("mcf548x-flexcan", 0,
++			mcf548x_can0_resources, 2);
++	if (IS_ERR(pdev[0])) {
++		err = PTR_ERR(pdev[0]);
++		return err;
++	}
++	pdev[1] = platform_device_register_simple("mcf548x-flexcan", 1,
++			mcf548x_can1_resources, 2);
++	if (IS_ERR(pdev[1])) {
++		err = PTR_ERR(pdev[1]);
++		return err;
++	}
++
++	/* FlexCAN clock */
++	pdata.clock_frq = 100000000;
++
++	for (i = 0; i < PDEV_MAX; i++) {
++		err = platform_device_add_data(pdev[i], &pdata, sizeof(pdata));
++		if (err)
++			return err;
++	}
++	return err;
++}
++
++int __init mcf548x_can_init(void)
++{
++	int err = mcf548x_of_to_pdev();
++
++	if (err) {
++		printk(KERN_ERR "%s init failed with err=%d\n",
++			mcf548x_can_driver.driver.name, err);
++		return err;
++	}
++
++	return platform_driver_register(&mcf548x_can_driver);
++}
++
++void __exit mcf548x_can_exit(void)
++{
++	int i;
++	platform_driver_unregister(&mcf548x_can_driver);
++	for (i = 0; i < PDEV_MAX; i++)
++		platform_device_unregister(pdev[i]);
++}
++
++module_init(mcf548x_can_init);
++module_exit(mcf548x_can_exit);
++
++MODULE_AUTHOR("Andrey Volkov <avolkov@varma-el.com>");
++MODULE_DESCRIPTION("Freescale MCF548x CAN driver");
++MODULE_LICENSE("GPL v2");
+--- a/include/asm-m68k/m5485sim.h
++++ b/include/asm-m68k/m5485sim.h
+@@ -186,6 +186,8 @@
+ #define MCF_PAR_PCIBR   	   MCF_REG16(0x000A4A)
+ #define MCF_PAR_PSCn(x)            MCF_REG08(0x000A4F-((x)&0x3))
+ #define MCF_PAR_FECI2CIRQ   	   MCF_REG16(0x000A44)
++#define MCF_PAR_DSPI               MCF_REG16(0x000A50)
++#define MCF_PAR_TIMER              MCF_REG08(0X000A52)
+ #define MCF_EPPAR       	   MCF_REG16(0x000F00)
+ #define MCF_EPIER       	   MCF_REG08(0x000F05)
+ #define MCF_EPFR       	   	   MCF_REG08(0x000F0C)
+--- /dev/null
++++ b/include/linux/can/dev.h
+@@ -0,0 +1,62 @@
++/*
++ * linux/can/dev.h
++ *
++ * Definitions for CAN controller network devices lib (work in progress)
++ *
++ * * * $Id$
++ *
++ * Author: Andrey Volkov <avolkov@varma-el.com>
++ * Copyright (c) 2006 Varma Electronics Oy
++ *
++ */
++
++#ifndef CAN_DEVICE_H
++#define CAN_DEVICE_H
++
++#include <linux/version.h>
++#include <linux/can/error.h>
++#include <linux/can/ioctl.h>
++
++struct can_priv {
++	struct can_device_stats can_stats;
++
++	/* can-bus oscillator frequency, in Hz,
++	   BE CAREFUL! SOME CONTROLLERS (LIKE SJA1000)
++	   FOOLISH ABOUT THIS FRQ (for sja1000 as ex. this
++	   clock must be xtal clock divided by 2). */
++	u32	can_sys_clock;
++
++	/* by default max_brp is equal 64,
++	   but for a Freescale TouCAN, as ex., it can be 255*/
++	u32	max_brp;
++	/* For the mostly all controllers, max_sjw is equal 4, but
++	   some, hmm, CAN implementations hardwared it to 1 */
++	u8	max_sjw;
++
++	u32	baudrate;	/* in bauds */
++	struct can_bittime	bit_time;
++
++	spinlock_t irq_lock;
++	/* Please hold this lock when touching net_stats/can_stats*/
++	spinlock_t stats_lock;
++
++	can_state_t state;
++	can_mode_t  mode;
++	can_ctrlmode_t ctrlmode;
++
++	int (*do_set_bit_time)(struct net_device *dev, struct can_bittime *br);
++	int (*do_get_state)   (struct net_device *dev, can_state_t *state);
++	int (*do_set_mode)    (struct net_device *dev, can_mode_t mode);
++	int (*do_set_ctrlmode)(struct net_device *dev, can_ctrlmode_t ctrlmode);
++	int (*do_get_ctrlmode)(struct net_device *dev, can_ctrlmode_t *ctrlmode);
++};
++
++#define ND2D(_ndev)		(_ndev->dev.parent)
++
++struct net_device *alloc_candev(int sizeof_priv);
++void free_candev(struct net_device *dev);
++
++int can_calc_bit_time(struct can_priv *can, u32 baudrate,
++		      struct can_bittime_std *bit_time);
++
++#endif /* CAN_DEVICE_H */
+--- /dev/null
++++ b/include/linux/can/ioctl.h
+@@ -0,0 +1,152 @@
++/*
++ * linux/can/ioctl.h
++ *
++ * Definitions for CAN controller setup (work in progress)
++ *
++ * $Id$
++ *
++ * Send feedback to <socketcan-users@lists.berlios.de>
++ *
++ */
++
++#ifndef CAN_IOCTL_H
++#define CAN_IOCTL_H
++
++#include <linux/sockios.h>
++
++
++/* max. 16 private ioctls */
++
++#define SIOCSCANBAUDRATE	(SIOCDEVPRIVATE+0)
++#define SIOCGCANBAUDRATE	(SIOCDEVPRIVATE+1)
++
++#define SIOCSCANCUSTOMBITTIME   (SIOCDEVPRIVATE+2)
++#define SIOCGCANCUSTOMBITTIME   (SIOCDEVPRIVATE+3)
++
++#define SIOCSCANMODE		(SIOCDEVPRIVATE+4)
++#define SIOCGCANMODE		(SIOCDEVPRIVATE+5)
++
++#define SIOCSCANCTRLMODE	(SIOCDEVPRIVATE+6)
++#define SIOCGCANCTRLMODE	(SIOCDEVPRIVATE+7)
++
++#define SIOCSCANFILTER		(SIOCDEVPRIVATE+8)
++#define SIOCGCANFILTER		(SIOCDEVPRIVATE+9)
++
++#define SIOCGCANSTATE		(SIOCDEVPRIVATE+10)
++#define SIOCGCANSTATS		(SIOCDEVPRIVATE+11)
++
++#define SIOCSCANERRORCONFIG	(SIOCDEVPRIVATE+12)
++#define SIOCGCANERRORCONFIG	(SIOCDEVPRIVATE+13)
++
++/* parameters for ioctls */
++
++/* SIOC[SG]CANBAUDRATE */
++/* baudrate for CAN-controller in bits per second. */
++/* 0 = Scan for baudrate (Autobaud) */
++
++typedef __u32 can_baudrate_t;
++
++
++/* SIOC[SG]CANCUSTOMBITTIME */
++
++typedef enum CAN_BITTIME_TYPE {
++	CAN_BITTIME_STD,
++	CAN_BITTIME_BTR
++} can_bittime_type_t;
++
++/* TSEG1 of controllers usually is a sum of synch_seg (always 1),
++ * prop_seg and phase_seg1, TSEG2 = phase_seg2 */
++
++struct can_bittime_std {
++	__u32 brp;        /* baud rate prescaler */
++	__u8  prop_seg;   /* from 1 to 8 */
++	__u8  phase_seg1; /* from 1 to 8 */
++	__u8  phase_seg2; /* from 1 to 8 */
++	__u8  sjw:7;      /* from 1 to 4 */
++	__u8  sam:1;      /* 1 - enable triple sampling */
++};
++
++struct can_bittime_btr {
++	__u8  btr0;
++	__u8  btr1;
++};
++
++struct can_bittime {
++	can_bittime_type_t type;
++	union {
++		struct can_bittime_std std;
++		struct can_bittime_btr btr;
++	};
++};
++
++#define CAN_BAUDRATE_UNCONFIGURED	((__u32) 0xFFFFFFFFU)
++#define CAN_BAUDRATE_UNKNOWN		0
++
++/* SIOC[SG]CANMODE */
++
++typedef __u32 can_mode_t;
++
++#define CAN_MODE_STOP	0
++#define CAN_MODE_START	1
++#define CAN_MODE_SLEEP	2
++
++
++/* SIOC[SG]CANCTRLMODE */
++
++typedef __u32 can_ctrlmode_t;
++
++#define CAN_CTRLMODE_LOOPBACK   0x1
++#define CAN_CTRLMODE_LISTENONLY 0x2
++
++
++/* SIOCGCANFILTER */
++
++typedef __u32 can_filter_t;
++
++/* filter modes (may vary due to controller specific capabilities) */
++#define CAN_FILTER_CAPAB       0  /* get filter type capabilities
++				     (32 Bit value) */
++#define CAN_FILTER_MASK_VALUE  1  /* easy bit filter (see struct can_filter) */
++#define CAN_FILTER_SFF_BITMASK 2  /* bitfield with 2048 bit SFF filter */
++				  /* filters 3 - 31 currently undefined */
++
++#define CAN_FILTER_MAX         31 /* max. filter type value */
++
++
++/* SIOCGCANSTATE */
++
++typedef __u32 can_state_t;
++
++#define CAN_STATE_ACTIVE		0
++#define CAN_STATE_BUS_WARNING		1
++#define CAN_STATE_BUS_PASSIVE		2
++#define CAN_STATE_BUS_OFF		3
++#define CAN_STATE_SCANNING_BAUDRATE	4
++#define CAN_STATE_STOPPED		5
++#define CAN_STATE_SLEEPING		6
++
++
++/* SIOCGCANSTATS */
++
++struct can_device_stats {
++	int error_warning;
++	int data_overrun;
++	int wakeup;
++	int bus_error;
++	int error_passive;
++	int arbitration_lost;
++	int restarts;
++	int bus_error_at_init;
++};
++
++/* SIOC[SG]CANERRORCONFIG */
++
++typedef enum CAN_ERRCFG_TYPE {
++	CAN_ERRCFG_MASK,
++	CAN_ERRCFG_BUSERR,
++	CAN_ERRCFG_BUSOFF
++} can_errcfg_type_t;
++
++/* tbd */
++
++#endif /* CAN_IOCTL_H */
+--- /dev/null
++++ b/include/linux/can/version.h
+@@ -0,0 +1,22 @@
++/*
++ * linux/can/version.h
++ *
++ * Version information for the CAN network layer implementation
++
++ * Author: Urs Thuermann   <urs.thuermann@volkswagen.de>
++ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
++ * All rights reserved.
++ *
++ * Send feedback to <socketcan-users@lists.berlios.de>
++ *
++ */
++
++#ifndef CAN_VERSION_H
++#define CAN_VERSION_H
++
++#define RCSID(s) asm(".section .rodata.str1.1,\"aMS\",@progbits,1\n\t" \
++		     ".string \"" s "\"\n\t.previous\n")
++
++RCSID("$Id$");
++
++#endif /* CAN_VERSION_H */
+--- a/net/can/Makefile
++++ b/net/can/Makefile
+@@ -10,3 +10,6 @@ can-raw-objs		:= raw.o
+ 
+ obj-$(CONFIG_CAN_BCM)	+= can-bcm.o
+ can-bcm-objs		:= bcm.o
++
++obj-$(CONFIG_CAN)       += candev.o
++candev-objs             := dev.o
+--- /dev/null
++++ b/net/can/dev.c
+@@ -0,0 +1,292 @@
++/*
++ * $Id$
++ *
++ * Copyright (C) 2005 Marc Kleine-Budde, Pengutronix
++ * Copyright (C) 2006 Andrey Volkov, Varma Electronics
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the version 2 of the GNU General Public License
++ * as published by the Free Software Foundation
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <linux/if_arp.h>
++#include <linux/can.h>
++#include <linux/can/dev.h>
++
++MODULE_DESCRIPTION("CAN netdevice library");
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Marc Kleine-Budde <mkl@pengutronix.de>, "
++	      "Andrey Volkov <avolkov@varma-el.com>");
++
++/*
++ Abstract:
++	Baud rate calculated with next formula:
++	baud = frq/(brp*(1 + prop_seg+ phase_seg1 + phase_seg2))
++
++	This calc function based on work of Florian Hartwich and Armin Bassemi
++	"The Configuration of the CAN Bit Timing"
++	(http://www.semiconductors.bosch.de/pdf/CiA99Paper.pdf)
++
++ Parameters:
++  [in]
++    bit_time_nsec - expected bit time in nanosecs
++
++  [out]
++	bit_time	- calculated time segments, for meaning of
++			  each field read CAN standard.
++*/
++
++#define DEFAULT_MAX_BRP			64U
++#define DEFAULT_MAX_SJW			4U
++
++/* All below values in tq units */
++#define MAX_BIT_TIME	25U
++#define MIN_BIT_TIME	8U
++#define MAX_PROP_SEG	8U
++#define MAX_PHASE_SEG1	8U
++#define MAX_PHASE_SEG2	8U
++
++int can_calc_bit_time(struct can_priv *can, u32 baudrate,
++		      struct can_bittime_std *bit_time)
++{
++	int best_error  = -1; /* Ariphmetic error */
++	int df, best_df = -1; /* oscillator's tolerance range */
++	u32 quanta;	      /*in tq units*/
++	u32 brp, phase_seg1, phase_seg2, sjw, prop_seg;
++	u32 brp_min, brp_max, brp_expected;
++	u64 tmp;
++
++	/* baudrate range [1baud,1Mbaud] */
++	if (baudrate == 0 || baudrate > 1000000UL)
++		return -EINVAL;
++
++	tmp = (u64)can->can_sys_clock*1000;
++	do_div(tmp, baudrate);
++	brp_expected = (u32)tmp;
++
++	brp_min = brp_expected / (1000 * MAX_BIT_TIME);
++	if (brp_min == 0)
++		brp_min = 1;
++	if (brp_min > can->max_brp)
++		return -ERANGE;
++
++	brp_max = (brp_expected + 500 * MIN_BIT_TIME) / (1000 * MIN_BIT_TIME);
++	if (brp_max == 0)
++		brp_max = 1;
++	if (brp_max > can->max_brp)
++		brp_max = can->max_brp;
++
++	for (brp = brp_min; brp <= brp_max; brp++) {
++		quanta = brp_expected / (brp * 1000);
++		if (quanta < MAX_BIT_TIME && quanta * brp * 1000 !=
++				brp_expected)
++			quanta++;
++		if (quanta < MIN_BIT_TIME || quanta > MAX_BIT_TIME)
++			continue;
++
++		phase_seg2 = min((quanta - 3) / 2, MAX_PHASE_SEG2);
++		for (sjw = can->max_sjw; sjw > 0; sjw--) {
++			for (; phase_seg2 > sjw; phase_seg2--) {
++				u32 err1, err2;
++				phase_seg1 = phase_seg2 % 2 ?
++					phase_seg2-1 : phase_seg2;
++				prop_seg = quanta-1 - phase_seg2 - phase_seg1;
++				/*
++				 * FIXME: support of longer lines
++				 * (i.e. bigger prop_seg) is more prefered
++				 * than support of cheap oscillators
++				 * (i.e. bigger df/phase_seg1/phase_seg2)
++				 * */
++
++				if (prop_seg < phase_seg1)
++						continue;
++				if (prop_seg > MAX_PROP_SEG)
++						goto next_brp;
++
++				err1 = phase_seg1 * brp * 500 * 1000 /
++					(13 * brp_expected - phase_seg2 *
++					 brp * 1000);
++				err2 = sjw * brp * 50 * 1000 / brp_expected;
++
++				df = min(err1, err2);
++				if (df >= best_df) {
++					unsigned error = abs(brp_expected * 10 /
++							(brp * (1 + prop_seg +
++								phase_seg1 +
++								phase_seg2)) - 10000);
++
++					if (error > 10 || error > best_error)
++						continue;
++
++					if (error == best_error && prop_seg <
++							bit_time->prop_seg)
++						continue;
++
++					best_error = error;
++					best_df = df;
++					bit_time->brp = brp;
++					bit_time->prop_seg = prop_seg;
++					bit_time->phase_seg1 = phase_seg1;
++					bit_time->phase_seg2 = phase_seg2;
++					bit_time->sjw = sjw;
++					bit_time->sam =
++						(bit_time->phase_seg1 > 3);
++				}
++			}
++		}
++next_brp:	;
++	}
++
++	if (best_error < 0)
++		return -EDOM;
++	return 0;
++}
++EXPORT_SYMBOL(can_calc_bit_time);
++
++static int can_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++	struct can_priv *can = netdev_priv(dev);
++	struct can_bittime *bt = (struct can_bittime *)&ifr->ifr_ifru;
++	ulong *baudrate = (ulong *)&ifr->ifr_ifru;
++	int ret = -EOPNOTSUPP;
++
++	dev_dbg(ND2D(dev), "(%s) 0x%08x %p\n", __func__, cmd, &ifr->ifr_ifru);
++
++	switch (cmd) {
++	case SIOCSCANBAUDRATE:
++		if (can->do_set_bit_time) {
++			struct can_bittime bit_time;
++			ret = can_calc_bit_time(can, *baudrate, &bit_time.std);
++			if (ret != 0)
++				break;
++			bit_time.type = CAN_BITTIME_STD;
++			ret = can->do_set_bit_time(dev, &bit_time);
++			if (!ret) {
++				can->baudrate = *baudrate;
++				can->bit_time = bit_time;
++			}
++		}
++		break;
++	case SIOCGCANBAUDRATE:
++		*baudrate = can->baudrate;
++		ret = 0;
++		break;
++	case SIOCSCANCUSTOMBITTIME:
++		if (can->do_set_bit_time) {
++			ret = can->do_set_bit_time(dev, bt);
++			if (!ret) {
++				can->bit_time = *bt;
++				if (bt->type == CAN_BITTIME_STD && bt->std.brp) {
++					can->baudrate = can->can_sys_clock /
++						(bt->std.brp * (1 + bt->std.prop_seg +
++								bt->std.phase_seg1 +
++								bt->std.phase_seg2));
++				} else
++					can->baudrate = CAN_BAUDRATE_UNKNOWN;
++			}
++		}
++		break;
++	case SIOCGCANCUSTOMBITTIME:
++		*bt = can->bit_time;
++		ret = 0;
++		break;
++	case SIOCSCANMODE:
++		if (can->do_set_mode) {
++			can_mode_t mode =
++				*((can_mode_t *)(&ifr->ifr_ifru));
++			if (mode == CAN_MODE_START &&
++			    can->baudrate == CAN_BAUDRATE_UNCONFIGURED) {
++				dev_info(ND2D(dev), "Impossible to start \
++						on UNKNOWN speed\n");
++				ret = EINVAL;
++			} else
++				return can->do_set_mode(dev, mode);
++		}
++		break;
++	case SIOCGCANMODE:
++		*((can_mode_t *)(&ifr->ifr_ifru)) = can->mode;
++		ret = 0;
++		break;
++	case SIOCSCANCTRLMODE:
++		if (can->do_set_ctrlmode) {
++			can_ctrlmode_t ctrlmode =
++				*((can_ctrlmode_t *)(&ifr->ifr_ifru));
++			return can->do_set_ctrlmode(dev, ctrlmode);
++		}
++		break;
++	case SIOCGCANCTRLMODE:
++		*((can_ctrlmode_t *)(&ifr->ifr_ifru)) = can->ctrlmode;
++		ret = 0;
++		break;
++	case SIOCSCANFILTER:
++		break;
++	case SIOCGCANFILTER:
++		break;
++	case SIOCGCANSTATE:
++		if (can->do_get_state)
++			return can->do_get_state(dev,
++					(can_state_t *)(&ifr->ifr_ifru));
++		break;
++	case SIOCGCANSTATS:
++		*((struct can_device_stats *)(&ifr->ifr_ifru)) = can->can_stats;
++		ret = 0;
++		break;
++	}
++
++	return ret;
++}
++
++static void can_setup(struct net_device *dev)
++{
++	dev->type            = ARPHRD_CAN;
++	dev->mtu             = sizeof(struct can_frame);
++	dev->do_ioctl        = can_ioctl;
++	dev->hard_header_len = 0;
++	dev->addr_len        = 0;
++	dev->tx_queue_len    = 10;
++
++	/* New-style flags. */
++	dev->flags           = IFF_NOARP;
++	dev->features        = NETIF_F_NO_CSUM;
++}
++
++/*
++ * Function  alloc_candev
++ * 	Allocates and sets up an CAN device
++ */
++struct net_device *alloc_candev(int sizeof_priv)
++{
++	struct net_device *dev;
++	struct can_priv *priv;
++
++	dev = alloc_netdev(sizeof_priv, "can%d", can_setup);
++	if (!dev)
++		return NULL;
++
++	priv = netdev_priv(dev);
++
++	priv->baudrate = CAN_BAUDRATE_UNCONFIGURED;
++	priv->max_brp  = DEFAULT_MAX_BRP;
++	priv->max_sjw  = DEFAULT_MAX_SJW;
++	spin_lock_init(&priv->irq_lock);
++
++	return dev;
++}
++EXPORT_SYMBOL(alloc_candev);
++
++void free_candev(struct net_device *dev)
++{
++	free_netdev(dev);
++}
++EXPORT_SYMBOL(free_candev);
diff --git a/target/linux/coldfire/patches/078-m547x_8x_pci_initial.patch b/target/linux/coldfire/patches/078-m547x_8x_pci_initial.patch
new file mode 100644
index 0000000000..b311773c33
--- /dev/null
+++ b/target/linux/coldfire/patches/078-m547x_8x_pci_initial.patch
@@ -0,0 +1,2623 @@
+From 7f92b68c12c1891435c75f7f83a6390b4c73eaa6 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 10 Jul 2008 19:17:11 -0600
+Subject: [PATCH] Add PCI to m547x/m548x.
+
+LTIBName: m547x-8x-pci-initial
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+Signed-off-by: Shrek Wu <b16972@freescale.com>
+---
+ arch/m68k/Kconfig                 |    4 +-
+ arch/m68k/coldfire/Makefile       |    7 +-
+ arch/m68k/coldfire/ints.c         |    8 +-
+ arch/m68k/coldfire/mcf548x-pci.c  |  934 +++++++++++++++++++++++++++++++++++++
+ arch/m68k/kernel/Makefile         |    3 +
+ arch/m68k/kernel/bios32_mcf548x.c |  631 +++++++++++++++++++++++++
+ arch/m68k/kernel/dma.c            |   32 +-
+ arch/m68k/mm/kmap.c               |   11 +-
+ drivers/pci/access.c              |   16 +-
+ drivers/usb/host/Makefile         |    2 +-
+ include/asm-m68k/5445x_pci.h      |   94 ++++
+ include/asm-m68k/548x_pci.h       |   99 ++++
+ include/asm-m68k/io.h             |   65 +++-
+ include/asm-m68k/m5485pci.h       |  330 +++++++++++++
+ include/asm-m68k/pci.h            |   96 +----
+ include/asm-m68k/raw_io.h         |   26 +
+ include/asm-m68k/virtconvert.h    |    5 +
+ include/linux/pci.h               |    2 +
+ 18 files changed, 2250 insertions(+), 115 deletions(-)
+ create mode 100644 arch/m68k/coldfire/mcf548x-pci.c
+ create mode 100644 arch/m68k/kernel/bios32_mcf548x.c
+ create mode 100644 include/asm-m68k/5445x_pci.h
+ create mode 100644 include/asm-m68k/548x_pci.h
+ create mode 100644 include/asm-m68k/m5485pci.h
+
+--- a/arch/m68k/Kconfig
++++ b/arch/m68k/Kconfig
+@@ -175,8 +175,8 @@ config HADES
+ 	  to use this kernel on a Hades, say Y here; otherwise say N.
+ 
+ config PCI
+-	bool
+-	depends on HADES || M54455
++	bool "PCI bus support"
++	depends on HADES || M54455 || M547X_8X
+ 	default n
+ 	help
+ 	  Find out whether you have a PCI motherboard. PCI is the name of a
+--- a/arch/m68k/coldfire/Makefile
++++ b/arch/m68k/coldfire/Makefile
+@@ -3,12 +3,17 @@
+ #
+ 
+ obj-y:= entry.o config.o cache.o signal.o muldi3.o traps.o ints.o
+-
++ifdef CONFIG_M5445X
+ ifneq ($(strip $(CONFIG_USB) $(CONFIG_USB_GADGET_MCF5445X)),)
+ 	obj-y	+= usb.o usb/
+ endif
++endif
+ 
++ifdef CONFIG_M547X_8X
++obj-$(CONFIG_PCI)       += mcf548x-pci.o
++else
+ obj-$(CONFIG_PCI)	+= pci.o mcf5445x-pci.o iomap.o
++endif
+ obj-$(CONFIG_M5445X)	+= mcf5445x-devices.o
+ obj-$(CONFIG_M547X_8X)	+= m547x_8x-devices.o
+ obj-$(CONFIG_M547X_8X)	+= mcf548x-devices.o
+--- a/arch/m68k/coldfire/ints.c
++++ b/arch/m68k/coldfire/ints.c
+@@ -192,6 +192,8 @@ int setup_irq(unsigned int irq, struct i
+ 		/* Can't share interrupts unless both agree to */
+ 		if (!((*prev)->flags & node->flags & IRQF_SHARED)) {
+ 			spin_unlock_irqrestore(&contr->lock, flags);
++			printk(KERN_INFO "%s: -BUSY-Incorrect IRQ %d \n",
++				__FUNCTION__, irq);
+ 			return -EBUSY;
+ 		}
+ 		while (*prev)
+@@ -219,9 +221,11 @@ int request_irq(unsigned int irq,
+ 	struct irq_node *node = get_irq_node();
+ 	int res;
+ 
+-	if (!node)
++	if (!node) {
++		printk(KERN_INFO "%s:get_irq_node error %x\n",
++			__FUNCTION__,(unsigned int) node);
+ 		return -ENOMEM;
+-
++	}
+ 	node->handler = handler;
+ 	node->flags   = flags;
+ 	node->dev_id  = dev_id;
+--- /dev/null
++++ b/arch/m68k/coldfire/mcf548x-pci.c
+@@ -0,0 +1,934 @@
++/*
++ * 	ColdFire 547x/548x PCI Host Controller functions
++ */
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/pci.h>
++#include <linux/ioport.h>
++#include <linux/slab.h>
++#include <linux/version.h>
++#include <linux/interrupt.h>
++
++#include <linux/dma-mapping.h>
++#include <asm/coldfire.h>
++#include <asm/io.h>
++#include <asm/m5485sim.h>
++#include <asm/m5485pci.h>
++#include <asm/irq.h>
++#include <asm/pci.h>
++#include <asm/virtconvert.h>
++
++
++#undef DEBUG
++//#define DEBUG
++
++#ifdef DEBUG
++//#define DBG(x...) printk(KERN_DEBUG x)
++#define DBG(x...) printk(x)
++#else
++#define DBG(x...)
++#endif
++
++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,75))
++# define irqreturn_t void
++# define IRQ_HANDLED
++# define IRQ_NONE
++#endif
++
++/*
++ *  Bridge configration dafaults
++ */
++#define PCI_RETRIES	0
++#define PCI_CACHE_LINE 	8
++#define PCI_MINGNT	1
++#define PCI_MAXLAT	42
++
++
++/*
++ *  Initiator windows setting
++ */
++#define HOST_MEM_BASE    	0xD0000000	/* ColdFire Memory window base 	*/
++#define PCI_MEM_BASE    	0xD0000000	/* PCI Memory window base	*/
++#define PCI_MEM_SIZE    	0x08000000	/* Memory window size (128M)	*/
++#define HOST_IO_BASE     	0xD8000000	/* ColdFire I/O window base 	*/
++#define PCI_IO_BASE_ADDR     	0x00000000	/* PCI I/O window base 		*/
++#define PCI_IO_SIZE     	0x00010000	/* I/O window size (64K) 	*/
++#define HOST_CFG_BASE    	0xD8000000	/* ColdFire config window base 	*/
++#define HOST_DMA_BASE 	 CONFIG_SDRAM_BASE	/* ColdFire PCI-DMA window base */
++#define PCI_HDR_BASE    	(MCF_MBAR+0xB00)/* ColdFire config registers    */
++
++#define PCI_MEM_MASK		(PCI_MEM_SIZE-1)
++#define PCI_IO_MASK		(PCI_IO_SIZE-1)
++
++/* Macro to set initiator window */
++#define WxBAR(host_address, pci_address, size) 	\
++	(((host_address)  & 0xff000000)      |	\
++    	((((size)-1) & 0xff000000) >> 8)     | 	\
++	((pci_address) & 0xff000000) >> 16)
++
++/*
++ *  BIOS internal data
++ */
++static u8 revision;		/* controller revision */
++
++/*
++ * 	Board specific setting
++ */
++const unsigned int irq_lines[] = { 5, 7 };
++
++#define N_SLOTS      	(sizeof(board_info) / sizeof(board_info[0]))
++#define N_IRQS		(sizeof(irq_lines)  / sizeof(irq_lines[0]))
++#define BRIDGE_SLOT  	0
++
++const struct slotinfo {
++	unsigned char idsel;	/* device number     */
++	unsigned char irq;	/* external IRQ      */
++	unsigned char req;	/* REQ line number   */
++	unsigned char gnt;	/* GNT line number   */
++} board_info[] = {
++	{0,  0, 0, 0},		/* Bridge      */
++	{17, 5, 1, 1},		/* Slot #1     */
++	{18, 5, 2, 2},		/* Slot #2     */	
++	{20, 7, 3, 3},		/* Slot #3     */
++	{21, 7, 4, 4},		/* Slot #4     */
++};
++
++/************************************************************************/
++
++/*
++ * static int mk_conf_addr()
++ *
++ * Return type0 or type1 configuration address
++ * by the means of device address and PCI dword location
++ * 0 - for not existing slots
++ */
++static int mk_conf_addr(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where)
++{
++	int slot, func, address, idsel, dev_fn;
++
++	if (bus->number) {
++		address = MCF_PCICAR_E | (bus->number << 16) |
++		    (devfn << 8) | (where & 0xfc);
++	} else {
++		slot = PCI_SLOT(devfn);
++		if (slot > N_SLOTS || slot == BRIDGE_SLOT)
++			return 0;
++		else {
++			func = PCI_FUNC(devfn);
++			idsel = board_info[slot].idsel;
++
++			dev_fn = PCI_DEVFN(idsel, func);
++			address = MCF_PCICAR_E | (bus->number << 16) |
++			    (dev_fn << 8) | (where & 0xfc);
++		}
++	}
++
++	return (address);
++}
++
++/*
++ * static int read_config_byte()
++ *
++ * Read a byte from configuration space of specified device
++ */
++static int read_config_byte(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u8 *value)
++{
++	int slot;
++	int address;
++	int result;
++
++	*value = 0xff;
++	result = PCIBIOS_SUCCESSFUL;
++
++	slot = PCI_SLOT(devfn);
++	if (slot == BRIDGE_SLOT) {
++		if (where <= 0x40)
++			*value = *(volatile u8 *) (PCI_HDR_BASE + (where ^ 3));
++		else
++			*value = 0;
++	} else {
++		address = mk_conf_addr(bus, devfn, where);
++		if (!address)
++			result = PCIBIOS_DEVICE_NOT_FOUND;
++		else {
++			MCF_PCICAR = address;
++			*value = *(volatile u8 *) (HOST_CFG_BASE + (where & 3));
++		}
++	}
++	__asm__ __volatile__("nop");
++	__asm__ __volatile__("nop");
++	MCF_PCICAR &= ~MCF_PCICAR_E;
++
++	DBG("PCI: read_config_byte bus=%d, devfn=%d, addr=0x%02X, val=0x%02X, ret=%02X\n",
++	    bus->number, devfn, where, *value, result);
++
++	return (result);
++}
++
++/*
++ * static int read_config_word()
++ *
++ * Read a word from configuration space of specified device
++ */
++static int read_config_word(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u16 *value)
++{
++	int slot;
++	int address;
++	int result;
++
++	*value = 0xffff;
++	result = PCIBIOS_SUCCESSFUL;
++
++	if (where & 0x1)
++		result = PCIBIOS_BAD_REGISTER_NUMBER;
++	else {
++		slot = PCI_SLOT(devfn);
++		if (slot == BRIDGE_SLOT) {
++			if (where <= 0x3f)
++				*value =
++				    *(volatile u16 *) (PCI_HDR_BASE +
++						       (where ^ 2));
++			else
++				*value = 0;
++		} else {
++			address = mk_conf_addr(bus, devfn, where);
++			if (!address)
++				result = PCIBIOS_DEVICE_NOT_FOUND;
++			else {
++				MCF_PCICAR = address;
++				*value = le16_to_cpu(*(volatile u16 *)
++						     (HOST_CFG_BASE +
++						      (where & 2)));
++			}
++		}
++	}
++        __asm__ __volatile__("nop");
++        __asm__ __volatile__("nop");
++	MCF_PCICAR &= ~MCF_PCICAR_E;
++
++	DBG("PCI: read_config_word bus=%d, devfn=%d, addr=0x%02X, val=0x%04X ret=%02X\n",
++	    bus->number, devfn, where, *value, result);
++
++	return (result);
++}
++
++/*
++ * static int read_config_dword()
++ *
++ * Read a long word from configuration space of specified device
++ */
++static int read_config_dword(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u32 *value)
++{
++	int slot;
++	int address;
++	int result;
++
++	*value = 0xffffffff;
++	result = PCIBIOS_SUCCESSFUL;
++
++	if (where & 0x3)
++		result = PCIBIOS_BAD_REGISTER_NUMBER;
++	else {
++		slot = PCI_SLOT(devfn);
++		if (slot == BRIDGE_SLOT) {
++			if (where <= 0x3d)
++				*value =
++				    *(volatile u32 *) (PCI_HDR_BASE + where);
++			else
++				*value = 0;
++			__asm__ __volatile__("nop");
++        		__asm__ __volatile__("nop");
++		} else {
++			address = mk_conf_addr(bus, devfn, where);
++			if (!address)
++				result = PCIBIOS_DEVICE_NOT_FOUND;
++			else {
++				MCF_PCICAR = address;
++				*value = le32_to_cpu(*(volatile u32 *)
++						     (HOST_CFG_BASE));
++				__asm__ __volatile__("nop");
++				__asm__ __volatile__("nop");
++				if (bus->number != 0 && revision < 1) {
++					volatile u32 temp;
++
++					MCF_PCICAR |= 0xff0000;
++					temp = *(volatile u32 *) (HOST_CFG_BASE);
++				}
++			}
++		}
++	}
++
++	MCF_PCICAR &= ~MCF_PCICAR_E;
++
++	DBG("PCI: read_config_dword bus=%d, devfn=%d, addr=0x%02X, value=0x%08X ret=%02X\n",
++	     bus->number, devfn, where, *value, result);
++
++	return (result);
++}
++
++/*
++ * static int write_config_byte()
++ *
++ * Write a byte to configuration space of specified device
++ */
++static int write_config_byte(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u8 value)
++{
++	int slot;
++	int address;
++	int result;
++
++	result = PCIBIOS_SUCCESSFUL;
++
++	slot = PCI_SLOT(devfn);
++	if (slot == BRIDGE_SLOT) {
++		if (where <= 0x40)
++			*(volatile u8 *) (PCI_HDR_BASE + (where ^ 3)) = value;
++	} else {
++		address = mk_conf_addr(bus, devfn, where);
++		if (!address)
++			result = PCIBIOS_DEVICE_NOT_FOUND;
++		else {
++			MCF_PCICAR = address;
++			*(volatile u8 *) (HOST_CFG_BASE + (where & 3)) = value;
++		}
++	}
++        __asm__ __volatile__("nop");
++        __asm__ __volatile__("nop");
++	MCF_PCICAR &= ~MCF_PCICAR_E;
++
++	DBG("PCI: write_config_byte bus=%d, devfn=%d, addr=0x%02X, value=0x%02X ret=%02X\n",
++	     bus->number, devfn, where, value, result);
++
++	return (result);
++}
++
++/*
++ * static int write_config_word()
++ *
++ * Write a word to configuration space of specified device
++ */
++static int write_config_word(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u16 value)
++{
++	int slot;
++	int address;
++	int result;
++
++	result = PCIBIOS_SUCCESSFUL;
++
++	if (where & 0x1)
++		result = PCIBIOS_BAD_REGISTER_NUMBER;
++	else {
++		slot = PCI_SLOT(devfn);
++		if (slot == BRIDGE_SLOT) {
++			if (where <= 0x3f)
++				*(volatile u16 *) (PCI_HDR_BASE + (where ^ 2)) =
++				    value;
++		} else {
++			address = mk_conf_addr(bus, devfn, where);
++			if (!address)
++				result = PCIBIOS_DEVICE_NOT_FOUND;
++			else {
++				MCF_PCICAR = address;
++				*(volatile u16 *) (HOST_CFG_BASE + (where & 2)) =
++				    cpu_to_le16(value);
++			}
++		}
++	}
++	__asm__ __volatile__("nop");
++        __asm__ __volatile__("nop");
++	MCF_PCICAR &= ~MCF_PCICAR_E;
++
++	DBG("PCI: write_config_word bus=%d, devfn=%d, addr=0x%02X, value=0x%04X ret=%02X\n",
++	     bus->number, devfn, where, value, result);
++
++	return (result);
++}
++
++/*
++ * static int write_config_dword()
++ *
++ * Write a long word to configuration space of specified device
++ */
++static int write_config_dword(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u32 value)
++{
++	int slot;
++	int address;
++	int result;
++
++	result = PCIBIOS_SUCCESSFUL;
++
++	if (where & 0x3)
++		result = PCIBIOS_BAD_REGISTER_NUMBER;
++	else {
++		slot = PCI_SLOT(devfn);
++		if (slot == BRIDGE_SLOT) {
++			if (where <= 0x3d)
++				*(volatile u32 *) (PCI_HDR_BASE + where) =
++				    value;
++		} else {
++			address = mk_conf_addr(bus, devfn, where);
++			if (!address)
++				result = PCIBIOS_DEVICE_NOT_FOUND;
++			else {
++				MCF_PCICAR = address;
++				*(volatile u32 *) (HOST_CFG_BASE) =
++				    cpu_to_le32(value);
++			}
++		}
++	}
++	__asm__ __volatile__("nop");
++        __asm__ __volatile__("nop");
++	MCF_PCICAR &= ~MCF_PCICAR_E;
++
++	DBG("PCI: write_config_dword dev=%d, fn=%d, addr=0x%02X, value=0x%08X ret=%02X\n",
++	    PCI_SLOT(devfn), PCI_FUNC(devfn), where,  value, result);
++
++	return (result);
++}
++
++static int config_read(struct pci_bus *bus, unsigned int devfn,
++		       int where, int size, u32 * val)
++{
++	switch (size) {
++	case 1:
++		return read_config_byte(bus, devfn, where, (u8 *) val);
++	case 2:
++		return read_config_word(bus, devfn, where, (u16 *) val);
++	default:
++		return read_config_dword(bus, devfn, where, val);
++	}
++}
++
++static int config_write(struct pci_bus *bus, unsigned int devfn,
++			int where, int size, u32 val)
++{
++	switch (size) {
++	case 1:
++		return write_config_byte(bus, devfn, where, (u8) val);
++	case 2:
++		return write_config_word(bus, devfn, where, (u16) val);
++	default:
++		return write_config_dword(bus, devfn, where, val);
++	}
++}
++
++/*
++ *  configuration routines entry points
++ */
++static struct pci_ops bus_ops = {
++      read:		config_read,
++      write:		config_write
++};
++
++/************************************************************************/
++
++/*
++ * u8 pci_inb()
++ *
++ * Read a byte at specified address from I/O space
++ */
++unsigned char pci_inb(long addr)
++{
++	char value;
++
++	value = *(volatile unsigned char *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
++	DBG("PCI: inb addr=0x%08X, value=0x%02X\n", addr, value);
++
++	return (unsigned char) value;
++}
++
++
++/*
++ * u16 pci_inw()
++ *
++ * Read a word at specified address from I/O space
++ */
++unsigned short pci_inw(long addr)
++{
++	short value;
++	volatile unsigned short *ptr;
++
++	ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
++	value = le16_to_cpu(*ptr);
++
++	DBG("PCI: inw addr=0x%08X, value=0x%04X\n",  addr, value);
++	return (unsigned short) value;
++}
++
++/*
++ * u16 pci_raw_inw()
++ *
++ * Read a raw word at specified address from I/O space
++ */
++unsigned short pci_raw_inw(long addr)
++{
++	short value;
++	volatile unsigned short *ptr;
++
++	ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
++	value = *ptr;
++
++	DBG("PCI: raw_inw addr=0x%08X, value=0x%04X\n",  addr, value);
++	return (unsigned short) value;
++}
++
++/*
++ * u32 pci_inl()
++ *
++ * Read a dword at specified address from I/O space
++ */
++unsigned long pci_inl(long addr)
++{
++	long value;
++	volatile unsigned long *ptr;
++
++	ptr = (volatile unsigned long *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
++	value = le32_to_cpu(*ptr);
++
++	DBG("PCI: inl addr=0x%08X, value=0x%08X\n",  addr, value);
++	return (unsigned long) value;
++}
++
++/*
++ * u32 pci_raw_inl()
++ *
++ * Read a raw dword at specified address from I/O space
++ */
++unsigned long pci_raw_inl(long addr)
++{
++	long value;
++	volatile unsigned long *ptr;
++
++	ptr = (volatile unsigned long *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
++	value = *ptr;
++
++	DBG("PCI: raw_inl addr=0x%08X, value=0x%08X\n",  addr, value);
++	return (unsigned long) value;
++}
++
++/*
++ * void pci_outb()
++ *
++ * Write a byte value at specified address to I/O space
++ */
++void pci_outb( unsigned char value,  long addr)
++{
++
++	*(volatile unsigned char *) (HOST_IO_BASE | (addr & PCI_IO_MASK)) = value;
++	DBG("PCI: outb addr=0x%08X, value=0x%02X\n",  addr, value);
++}
++
++
++/*
++ * void pci_outw()
++ *
++ * Write a word value at specified address to I/O space
++ */
++void pci_outw(volatile unsigned short value, volatile  long addr)
++{
++	volatile unsigned short *ptr;
++
++	ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
++	*ptr = cpu_to_le16(value);
++	DBG("PCI: outw addr=0x%08X, value=0x%04X\n",  addr, value);
++}
++
++/*
++ * void pci_raw_outw()
++ *
++ * Write a raw word value at specified address to I/O space
++ */
++void pci_raw_outw(volatile unsigned short value, volatile  long addr)
++{
++	volatile unsigned short *ptr;
++
++	ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK));
++	*ptr = value;
++	DBG("PCI: raw_outw addr=0x%08X, value=0x%04X\n",  addr, value);
++}
++
++/*
++ * void pci_outl()
++ *
++ * Write a long word value at specified address to I/O space
++ */
++void pci_outl(volatile unsigned long value, volatile long addr)
++{
++	volatile unsigned long *ptr;
++
++	ptr = (volatile unsigned long *)(HOST_IO_BASE | (addr & PCI_IO_MASK));
++	*ptr = cpu_to_le32(value);
++	DBG("PCI: outl addr=0x%08X, value=0x%08X\n", addr, value);
++}
++
++/*
++ * void pci_raw_outl()
++ *
++ * Write a raw long word value at specified address to I/O space
++ */
++void pci_raw_outl(volatile unsigned long value, volatile long addr)
++{
++	volatile unsigned long *ptr;
++
++	ptr = (volatile unsigned long *)(HOST_IO_BASE | (addr & PCI_IO_MASK));
++	*ptr = value;
++	DBG("PCI: raw_outl addr=0x%08X, value=0x%08X\n", addr, value);
++}
++
++/*
++ * void pci_insb()
++ *
++ * Read several byte values from specified I/O port
++ */
++void pci_insb(volatile unsigned char *addr, unsigned char *buf, int len)
++{
++	for (; len--; buf++)
++		*buf = pci_inb((unsigned long)addr);
++	DBG("PCI: pci_insb addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
++}
++
++
++/*
++ * void pci_insw()
++ *
++ * Read several word values from specified I/O port
++ */
++void pci_insw(volatile unsigned short *addr, unsigned short *buf, int len)
++{
++	for (; len--; buf++)
++		*buf = pci_inw((unsigned long)addr);
++	DBG("PCI: pci_insw addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
++}
++
++/*
++ * void pci_insl()
++ *
++ * Read several dword values from specified I/O port
++ */
++void pci_insl(volatile unsigned long *addr, unsigned long *buf, int len)
++{
++	for (; len--; buf++)
++		*buf = pci_inl((unsigned long)addr);
++	DBG("PCI: pci_insl addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
++}
++
++/*
++ * void pci_outsb()
++ *
++ * Write several byte values to specified I/O port
++ */
++void pci_outsb(volatile unsigned char *addr, const unsigned char *buf, int len)
++{
++	for (; len--; buf++)
++		pci_outb((unsigned long)addr, *buf);
++	DBG("PCI: pci_outsb addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
++}
++
++/*
++ * void pci_outsw()
++ *
++ * Write several word values to specified I/O port
++ */
++void pci_outsw(volatile unsigned short *addr, const unsigned short *buf, int len)
++{
++	for (; len--; buf++)
++		pci_outw((unsigned long)addr, *buf);
++	DBG("PCI: pci_outsw addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
++}
++
++/*
++ * void pci_outsl()
++ *
++ * Write several dword values to specified I/O port
++ */
++void pci_outsl(volatile unsigned long *addr, const unsigned long *buf, int len)
++{
++	for (; len--; buf++)
++		pci_outl((unsigned long)addr, *buf);
++	DBG("PCI: pci_outsl addr=0x%08X, buf=%p, len=%d\n", addr, buf, len);
++}
++
++/*
++ * void pci_xlb_handler()
++ *
++ * PCI XLB interrupt handler
++ */
++irqreturn_t xlb_interrupt(int irq, void *dev)
++{
++	volatile int xlb_error = MCF_PCIISR;
++
++	/* Acknowlege interrupt */
++	MCF_PCIISR = xlb_error;
++
++	/* Dump interrupt reason */
++	if (xlb_error & MCF_PCIISR_RE)
++		DBG("PCI: Retry Error Received\n");
++		
++	if (xlb_error & MCF_PCIISR_IA)
++		DBG("PCI: Initiator Abort Received\n");
++		
++	if (xlb_error & MCF_PCIISR_TA)
++		DBG("PCI: Target Abort Received\n");
++
++	return IRQ_HANDLED;
++}
++
++
++/*
++ * void pci_arbiter_handler()
++ *
++ * PCI arbiter interrupt handler
++ */
++irqreturn_t arb_interrupt(int irq, void *dev)
++{
++	volatile unsigned long arb_error = MCF_PCIARB_PASR;
++
++	/* Acknowlege interrupt */
++	printk("%s\n",__FUNCTION__);
++	MCF_PCIARB_PASR = arb_error;
++
++	if (arb_error & MCF_PCIARB_PASR_ITLMBK) {
++		DBG("PCI: coldfire master time-out\n");				
++				
++		/* Set infinite  number of retries */			
++	        MCF_PCIICR &= ~0xFF;		    		
++	}
++		
++	if (arb_error & MCF_PCIARB_PASR_EXTMBK(0x1F)) {
++		arb_error >>= 17;
++		DBG("PCI: external master time-out (mask = 0x%X)\n", arb_error);
++		
++	        /* raise arbitration priority level */		
++		MCF_PCIARB_PACR = MCF_PCIARB_PACR_EXTMPRI(arb_error);
++	}
++
++	return IRQ_HANDLED;
++}
++
++
++/*
++ * void pci_eint_handler()
++ *
++ * Eport interrupt handler
++ */
++irqreturn_t eint_handler(int irq, void *dev)
++{
++	/* Just acknowlege interrupt and exit */
++	MCF_EPFR = 0x1 << (irq - 64);
++	return IRQ_HANDLED;
++}
++
++
++/*
++ * void __init coldfire_fixup(int pci_modify)
++ *
++ * Assign IRQ numbers as used by Linux to the interrupt pins
++ * of the PCI cards.
++ */
++static void __init coldfire_fixup(int pci_modify)
++{
++	struct pci_dev *dev;
++	unsigned char slot, pin;
++
++	DBG("%s\n",__FUNCTION__);
++#ifdef NL_ORIGINAL
++	pci_for_each_dev(dev) {
++#else
++	dev = NULL;
++	while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
++#endif
++		if (dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) {
++			slot = PCI_SLOT(dev->devfn);
++			dev->irq = 64 + board_info[slot].irq;
++
++			/* Check if device needs interrupt */
++#ifdef NL_ORIGINAL
++			pcibios_read_config_byte(
++				    dev->bus->number, dev->devfn,
++    				    PCI_INTERRUPT_PIN, &pin);
++
++			if ( pin ) {
++				pcibios_write_config_byte(
++					dev->bus->number, dev->devfn,
++					PCI_INTERRUPT_LINE, dev->irq);
++			}
++#else
++			pci_read_config_byte(dev,
++    				    PCI_INTERRUPT_PIN, &pin);
++
++			if ( pin ) {
++				pci_write_config_byte(dev,
++					PCI_INTERRUPT_LINE, dev->irq);
++			}
++#endif
++		}
++	}
++}
++
++static void __init configure_device(struct pci_dev *dev)
++{
++	/* TODO: This should depend from disable_pci_burst setting */
++	DBG("%s\n",__FUNCTION__);
++#ifdef NL_ORIGINAL
++	pcibios_write_config_byte(bus, devfn, PCI_CACHE_LINE_SIZE, PCI_CACHE_LINE);
++#else
++	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, PCI_CACHE_LINE);
++#endif
++}
++
++struct pci_bus_info *__init init_coldfire_pci(void)
++{
++	static struct pci_bus_info bus;
++	int i;
++	int pci_mem_va;
++	static char irq_name[N_IRQS][15];
++
++	/* Get controller revision */
++	revision = MCF_PCICCRIR;
++	printk("ColdFire PCI Host Bridge (Rev. %d) detected:"
++		"MEMBase %x,MEMLen %x,IOBase %x,IOLen %x\n",
++		revision, HOST_MEM_BASE, PCI_MEM_SIZE - 1, 0, PCI_IO_SIZE - 1);
++
++	/* Setup bus info structure. */
++	memset(&bus, 0, sizeof (struct pci_bus_info));
++
++	/* Request intiator memory resource */
++	bus.mem_space.start = PCI_MEM_BASE;//HOST_MEM_BASE;
++	bus.mem_space.end = bus.mem_space.start + PCI_MEM_SIZE - 1;
++	bus.mem_space.name = "PCI Bus #0";
++	if (request_resource(&iomem_resource, &bus.mem_space) != 0)
++	{
++		printk("Failed to request bridge iomem resource\n");
++		return NULL;
++	}
++
++	/* Request intiator memory resource */
++	bus.io_space.start = 0;
++	bus.io_space.end = bus.io_space.start + PCI_IO_SIZE - 1;
++	bus.io_space.name =  "PCI Bus #0";
++	if (request_resource(&ioport_resource, &bus.io_space) != 0)
++	{
++		printk("Failed to request bridge ioport resource\n");
++		return NULL;
++	}
++
++	/* Set up the arbiter */
++	MCF_PCIARB_PACR = 0 /*MCF_PCIARB_PACR_PKMD*/
++			| MCF_PCIARB_PACR_INTMPRI 
++			| MCF_PCIARB_PACR_INTMINTEN 
++			| MCF_PCIARB_PACR_EXTMPRI(0x1F) 
++			| MCF_PCIARB_PACR_EXTMINTEN(0x1F);
++
++	/* GNT and REQ */
++	MCF_PAR_PCIBG = 0x3FF;
++	MCF_PAR_PCIBR = 0x3FF;
++
++	/* Enable bus mastering, memory access and MWI */
++	MCF_PCISCR = MCF_PCISCR_B | MCF_PCISCR_M | MCF_PCISCR_MW;
++
++	/* Setup burst parameters */
++	MCF_PCICR1 = MCF_PCICR1_LATTIMER(32) |
++	    	     MCF_PCICR1_CACHELINESIZE(PCI_CACHE_LINE);
++
++	MCF_PCICR2 = 0;
++	/*MCF_PCICR2_MINGNT(PCI_MINGNT) |
++		MCF_PCICR2_MAXLAT(PCI_MAXLAT);
++	*/
++	/* Turn on error signaling */
++	MCF_PCIICR = MCF_PCIICR_TAE | MCF_PCIICR_IAE | PCI_RETRIES;
++	MCF_PCIGSCR |= MCF_PCIGSCR_SEE;
++	/*
++	 * Configure Initiator Windows
++	 * Window 0: 128M PCI Memory @ HOST_MEM_BASE, 1:1 mapping
++	 * Window 1: 64K  I/O Memory @ HOST_IO_BASE,  1:0 mapping
++	 */
++	MCF_PCIIW0BTAR = WxBAR(HOST_MEM_BASE, PCI_MEM_BASE, PCI_MEM_SIZE);
++	MCF_PCIIW1BTAR = WxBAR(HOST_IO_BASE,  PCI_IO_BASE_ADDR,  PCI_IO_SIZE);
++
++	MCF_PCIIWCR = MCF_PCIIWCR_WINCTRL1_IO |
++	    	      MCF_PCIIWCR_WINCTRL0_MEMRDLINE;
++
++	/* Target PCI DMA Windows */
++	MCF_PCIBAR1   = PCI_DMA_BASE;
++	MCF_PCITBATR1 = HOST_DMA_BASE | MCF_PCITBATR1_EN;
++        MCF_PCIBAR0   = MCF_RAMBAR0;;
++        MCF_PCITBATR0 = MCF_RAMBAR0 | MCF_PCITBATR0_EN;
++        DBG("PCI TCR %x,MCF_PCIBAR1 %x,MCF_PCITBATR1 %x."
++		"MCF_PCIBAR0 %x,MCF_PCITBATR9 %x\n", MCF_PCITCR, MCF_PCIBAR1,
++		MCF_PCITBATR1, MCF_PCIBAR0, MCF_PCITBATR0);
++	/* Enable internal PCI controller interrupts */
++	MCF_ICR(ISC_PCI_XLB) = ILP_PCI_XLB;
++	/*request_irq(64+ISC_PCI_XLB, xlb_interrupt, 
++			SA_INTERRUPT, "PCI XL Bus", (void*)-1);
++	enable_irq (64+ISC_PCI_XLB);
++	*/
++        if(request_irq(64+ISC_PCI_XLB, xlb_interrupt, 
++                         IRQF_DISABLED, "PCI XL Bus", (void*)-1)){
++		printk("Cannot allocate ISC_PCI_XLB  IRQ\n");
++                return (struct pci_bus_info *)-EBUSY;
++	}
++
++	MCF_ICR(ISC_PCI_ARB) = ILP_PCI_ARB;
++	/*request_irq(64+ISC_PCI_ARB, arb_interrupt, 
++			SA_INTERRUPT, "PCI Arbiter", (void*)-1);
++	enable_irq (64+ISC_PCI_ARB);
++	*/
++        if(request_irq(64+ISC_PCI_ARB, arb_interrupt,
++                        IRQF_DISABLED, "PCI Arbiter", (void*)-1)){
++                printk("Cannot allocate ISC_PCI_ARB  IRQ\n");
++                return (struct pci_bus_info *)-EBUSY;
++        }
++
++	/* Set slots interrupt setting */
++	for (i = 0; i < N_IRQS; i++) 
++	{	
++		/* Set trailing edge for PCI interrupts */
++		MCF_EPPAR &= ~MCF_EPPAR_EPPA(irq_lines[i], 0x3);
++		if (irq_lines[i] == 5)
++			MCF_EPPAR |= MCF_EPPAR_EPPA(irq_lines[i],  MCF_EPPAR_EPPAx_FALLING);
++		else
++                        MCF_EPPAR |= MCF_EPPAR_EPPA(irq_lines[i],  0/*MCF_EPPAR_EPPAx_FALLING*/);
++		/* Turn on irq line in eport */
++		MCF_EPIER |= MCF_EPIER_EPIE(irq_lines[i]);
++
++		/* Enable irq in gpio */
++		if (irq_lines[i] == 5)
++		    MCF_PAR_FECI2CIRQ |= 1;
++		    
++		if (irq_lines[i] == 6)
++		    MCF_PAR_FECI2CIRQ |= 2;   
++
++		/* Register external interrupt handlers */
++		sprintf(irq_name[i], "PCI IRQ%d", irq_lines[i]);
++		/*request_irq(64 + irq_lines[i], eint_handler, 
++			    SA_SHIRQ, irq_name[i], (void*)-1);
++		enable_irq(64 + irq_lines[i]);*/
++        	if(request_irq(64 + irq_lines[i], eint_handler, 
++				IRQF_SHARED, irq_name[i], (void*)-1)){
++                	printk("Cannot allocate irq_lines[%d] IRQ\n", irq_lines[i]);
++                	return (struct pci_bus_info *)-EBUSY;
++        	}
++	}
++
++	/* Clear PCI Reset and wait for devices to reset */
++	MCF_PCIGSCR &= ~MCF_PCIGSCR_PR;
++	schedule_timeout((5 * HZ) / 10);
++	/* Remap initiator windows (should be 1:1 to the physical memory) */
++	pci_mem_va = (int) ioremap_nocache(HOST_MEM_BASE, PCI_MEM_SIZE + PCI_IO_SIZE);
++#if 1
++	printk("%s: MEMBase_phy %x, Virt %x, len %x\n",__FUNCTION__,
++		HOST_MEM_BASE,pci_mem_va,PCI_MEM_SIZE + PCI_IO_SIZE);
++#endif
++	BUG_ON(pci_mem_va != HOST_MEM_BASE);
++
++	/* Setup bios32 and pci bus driver callbacks */
++	bus.m68k_pci_ops = &bus_ops;
++	bus.fixup = coldfire_fixup;
++	bus.conf_device = configure_device;
++
++	return &bus;
++}
++
+--- a/arch/m68k/kernel/Makefile
++++ b/arch/m68k/kernel/Makefile
+@@ -12,6 +12,9 @@ ifndef CONFIG_COLDFIRE
+   obj-$(CONFIG_PCI) += bios32.o
+ else   # CONFIG_COLDFIRE
+   extra-y := ../coldfire/head.o vmlinux.lds
++ifdef CONFIG_M547X_8X
++  obj-$(CONFIG_PCI) += bios32_mcf548x.o
++endif
+ endif
+ endif
+ 
+--- /dev/null
++++ b/arch/m68k/kernel/bios32_mcf548x.c
+@@ -0,0 +1,631 @@
++/*
++ * bios32.c - PCI BIOS functions for m68k systems.
++ *
++ * Written by Wout Klaren.
++ *
++ * Based on the DEC Alpha bios32.c by Dave Rusling and David Mosberger.
++ */
++#include <linux/init.h>
++#include <linux/kernel.h>
++
++#if 0
++# define DBG_DEVS(args)		printk args
++#else
++# define DBG_DEVS(args)
++#endif
++
++#ifdef CONFIG_PCI
++
++/*
++ * PCI support for Linux/m68k. Currently only the Hades is supported.
++ *
++ * The support for PCI bridges in the DEC Alpha version has
++ * been removed in this version.
++ */
++
++#include <linux/pci.h>
++#include <linux/slab.h>
++#include <linux/mm.h>
++
++#include <asm/io.h>
++#include <asm/pci.h>
++#include <asm/uaccess.h>
++
++#define KB		1024
++#define MB		(1024*KB)
++#define GB		(1024*MB)
++
++#define MAJOR_REV	0
++#define MINOR_REV	5
++
++/*
++ * Align VAL to ALIGN, which must be a power of two.
++ */
++
++#define MAX(val1, val2)		(((val1) > (val2)) ? val1 : val2)
++
++/*
++ * Offsets relative to the I/O and memory base addresses from where resources
++ * are allocated.
++ */
++
++#ifdef CONFIG_COLDFIRE
++#define IO_ALLOC_OFFSET		0x00000100
++#define MEM_ALLOC_OFFSET	0x00000000
++#else /* CONFIG_COLDFIRE */
++#define IO_ALLOC_OFFSET		0x00004000
++#define MEM_ALLOC_OFFSET	0x04000000
++#endif /* CONFIG_COLDFIRE */
++
++/*
++ * Declarations of hardware specific initialisation functions.
++ */
++
++extern struct pci_bus_info *init_hades_pci(void);
++
++/*
++ * Bus info structure of the PCI bus. A pointer to this structure is
++ * put in the sysdata member of the pci_bus structure.
++ */
++
++static struct pci_bus_info *bus_info;
++
++static int pci_modify = 1;		/* If set, layout the PCI bus ourself. */
++static int skip_vga;			/* If set do not modify base addresses
++					   of vga cards.*/
++static int disable_pci_burst;		/* If set do not allow PCI bursts. */
++
++static unsigned int io_base;
++static unsigned int mem_base;
++
++/*
++ * static void disable_dev(struct pci_dev *dev)
++ *
++ * Disable PCI device DEV so that it does not respond to I/O or memory
++ * accesses.
++ *
++ * Parameters:
++ *
++ * dev	- device to disable.
++ */
++
++static void __init disable_dev(struct pci_dev *dev)
++{
++	unsigned short cmd;
++
++	if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) ||
++	     (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) ||
++	     (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga)
++		return;
++
++	pci_read_config_word(dev, PCI_COMMAND, &cmd);
++
++	cmd &= (~PCI_COMMAND_IO & ~PCI_COMMAND_MEMORY & ~PCI_COMMAND_MASTER);
++	pci_write_config_word(dev, PCI_COMMAND, cmd);
++}
++
++/* Stolen from pcibios_enable_resources/i386 */
++int pcibios_enable_device(struct pci_dev *dev, int mask)
++{
++	u16 cmd, old_cmd;
++	int idx;
++	struct resource *r;
++
++	pci_read_config_word(dev, PCI_COMMAND, &cmd);
++	old_cmd = cmd;
++	for(idx=0; idx<6; idx++) {
++		/* Only set up the requested stuff */
++		if (!(mask & (1<<idx)))
++			continue;
++
++		r = &dev->resource[idx];
++		if (!r->start && r->end) {
++			printk("PCI: Device %s not available because"
++				" of resource collisions\n", dev->dev.bus_id);
++			return -EINVAL;
++		}
++		if (r->flags & IORESOURCE_IO)
++			cmd |= PCI_COMMAND_IO;
++		if (r->flags & IORESOURCE_MEM)
++			cmd |= PCI_COMMAND_MEMORY;
++	}
++	if (dev->resource[PCI_ROM_RESOURCE].start)
++		cmd |= PCI_COMMAND_MEMORY;
++	if (cmd != old_cmd) {
++		printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->dev.bus_id, old_cmd, cmd);
++		pci_write_config_word(dev, PCI_COMMAND, cmd);
++	}
++	return 0;
++}
++
++/*
++ * static void layout_dev(struct pci_dev *dev)
++ *
++ * Layout memory and I/O for a device.
++ *
++ * Parameters:
++ *
++ * device	- device to layout memory and I/O for.
++ */
++
++static void __init layout_dev(struct pci_dev *dev)
++{
++	unsigned short cmd;
++	unsigned int base, mask, size, reg;
++	unsigned int alignto;
++	int i;
++
++	/*
++	 * Skip video cards if requested.
++	 */
++	if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) ||
++	     (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) ||
++	     (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga){
++		printk("%s: VGA\n",__FUNCTION__);
++		return;
++	}
++	pci_read_config_word(dev, PCI_COMMAND, &cmd);
++
++	for (reg = PCI_BASE_ADDRESS_0, i = 0; reg <= PCI_BASE_ADDRESS_5; reg += 4, i++)
++	{
++		/*
++		 * Figure out how much space and of what type this
++		 * device wants.
++		 */
++
++		pci_write_config_dword(dev, reg, 0xffffffff);
++		pci_read_config_dword(dev, reg, &base);
++		if (!base)
++		{
++			/* this base-address register is unused */
++			dev->resource[i].start = 0;
++			dev->resource[i].end = 0;
++			dev->resource[i].flags = 0;
++			continue;
++		}
++
++		/*
++		 * We've read the base address register back after
++		 * writing all ones and so now we must decode it.
++		 */
++	
++		if (base & PCI_BASE_ADDRESS_SPACE_IO)
++		{
++			/*
++			 * I/O space base address register.
++			 */
++
++			cmd |= PCI_COMMAND_IO;
++
++			base &= PCI_BASE_ADDRESS_IO_MASK;
++			mask = (~base << 1) | 0x1;
++			size = (mask & base) & 0xffffffff;
++
++			/*
++			 * Align to multiple of size of minimum base.
++			 */
++
++#ifdef CONFIG_COLDFIRE
++			alignto = MAX(PAGE_SIZE, size) ;
++#else /* CONFIG_COLDFIRE */
++			alignto = MAX(0x040, size) ;
++#endif /* CONFIG_COLDFIRE */
++			base = ALIGN(io_base, alignto);
++			io_base = base + size;
++			pci_write_config_dword(dev, reg, base | PCI_BASE_ADDRESS_SPACE_IO);
++
++			dev->resource[i].start = base;
++			dev->resource[i].end = dev->resource[i].start + size - 1;
++			dev->resource[i].flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
++
++			DBG_DEVS(("layout_dev: IO address: %x\n", base));
++		}
++		else
++		{
++			unsigned int type;
++
++			/*
++			 * Memory space base address register.
++			 */
++
++			cmd |= PCI_COMMAND_MEMORY;
++			type = base & PCI_BASE_ADDRESS_MEM_TYPE_MASK;
++			base &= PCI_BASE_ADDRESS_MEM_MASK;
++			mask = (~base << 1) | 0x1;
++			size = (mask & base) & 0xffffffff;
++			switch (type)
++			{
++			case PCI_BASE_ADDRESS_MEM_TYPE_32:
++			case PCI_BASE_ADDRESS_MEM_TYPE_64:
++				break;
++
++			case PCI_BASE_ADDRESS_MEM_TYPE_1M:
++				printk("bios32 WARNING: slot %d, function %d "
++				       "requests memory below 1MB---don't "
++				       "know how to do that.\n",
++				       PCI_SLOT(dev->devfn),
++				       PCI_FUNC(dev->devfn));
++				continue;
++			}
++			DBG_DEVS(("%s MEM: base %x,type %x,mask %x,size %x\n",
++				__FUNCTION__, base, type, mask, size));
++			/*
++			 * Align to multiple of size of minimum base.
++			 */
++
++			alignto = max_t(unsigned int, 0x1000, size);
++			base = ALIGN(mem_base, alignto);
++			mem_base = base + size;
++			pci_write_config_dword(dev, reg, base);
++
++			dev->resource[i].start = base;
++			dev->resource[i].end = dev->resource[i].start + size - 1;
++			dev->resource[i].flags = IORESOURCE_MEM;
++			DBG_DEVS(("%s MEM :base %x,size %x\n",
++				__FUNCTION__, base, size));
++			if (type == PCI_BASE_ADDRESS_MEM_TYPE_64)
++			{
++				/*
++				 * 64-bit address, set the highest 32 bits
++				 * to zero.
++				 */
++
++				reg += 4;
++				pci_write_config_dword(dev, reg, 0);
++
++				i++;
++				dev->resource[i].start = 0;
++				dev->resource[i].end = 0;
++				dev->resource[i].flags = 0;
++				printk("%s:type == 64\n",__FUNCTION__);
++			}
++		}
++	}
++
++	/*
++	 * Enable device:
++	 */
++
++	if (dev->class >> 8 == PCI_CLASS_NOT_DEFINED ||
++	    dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA ||
++	    dev->class >> 8 == PCI_CLASS_DISPLAY_VGA ||
++	    dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)
++	{
++		/*
++		 * All of these (may) have I/O scattered all around
++		 * and may not use i/o-base address registers at all.
++		 * So we just have to always enable I/O to these
++		 * devices.
++		 */
++		cmd |= PCI_COMMAND_IO;
++	}
++
++	pci_write_config_word(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER);
++
++	pci_write_config_byte(dev, PCI_LATENCY_TIMER, (disable_pci_burst) ? 0 : 32);
++
++	if (bus_info != NULL)
++		bus_info->conf_device(dev);	/* Machine dependent configuration. */
++
++	printk(KERN_INFO "layout_dev: bus %d  slot 0x%x  VID 0x%x  DID 0x%x  class 0x%x\n",
++		dev->bus->number, PCI_SLOT(dev->devfn),
++		dev->vendor, dev->device, dev->class);
++}
++
++/*
++ * static void layout_bus(struct pci_bus *bus)
++ *
++ * Layout memory and I/O for all devices on the given bus.
++ *
++ * Parameters:
++ *
++ * bus	- bus.
++ */
++
++static void __init layout_bus(struct pci_bus *bus)
++{
++	unsigned int bio, bmem;
++	struct pci_dev *dev;
++
++	DBG_DEVS(("layout_bus: starting bus %d\n", bus->number));
++
++	if (list_empty(&bus->devices) && list_empty(&bus->children))
++		return;
++
++	/*
++	 * Align the current bases on appropriate boundaries (4K for
++	 * IO and 1MB for memory).
++	 */
++
++	bio = io_base = ALIGN(io_base, 4*KB);
++	bmem = mem_base = ALIGN(mem_base, 1*MB);
++
++	/*
++	 * PCI devices might have been setup by a PCI BIOS emulation
++	 * running under TOS. In these cases there is a
++	 * window during which two devices may have an overlapping
++	 * address range. To avoid this causing trouble, we first
++	 * turn off the I/O and memory address decoders for all PCI
++	 * devices.  They'll be re-enabled only once all address
++	 * decoders are programmed consistently.
++	 */
++
++	DBG_DEVS(("layout_bus: disable_dev for bus %d\n", bus->number));
++
++#ifdef NL_ORIGINAL
++	for (dev = bus->devices; dev; dev = dev->sibling)
++#else
++	dev = NULL;
++	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
++#endif
++	{
++		if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) ||
++		    (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA))
++			disable_dev(dev);
++	}
++
++	/*
++	 * Allocate space to each device:
++	 */
++
++	DBG_DEVS(("layout_bus: starting bus %d devices\n", bus->number));
++
++#ifdef NL_ORIGINAL
++	for (dev = bus->devices; dev; dev = dev->sibling)
++#else
++	dev = NULL;
++	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
++#endif
++	{
++		if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) ||
++		    (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA))
++			layout_dev(dev);
++	}
++
++	DBG_DEVS(("layout_bus: bus %d finished\n", bus->number));
++}
++
++/*
++ * static void pcibios_fixup(void)
++ *
++ * Layout memory and I/O of all devices on the PCI bus if 'pci_modify' is
++ * true. This might be necessary because not every m68k machine with a PCI
++ * bus has a PCI BIOS. This function should be called right after
++ * pci_scan_bus() in pcibios_init().
++ */
++
++static void __init pcibios_fixup(void)
++{
++	DBG_DEVS(("%s\n", __FUNCTION__));
++	if (pci_modify)
++	{
++		/*
++		 * Set base addresses for allocation of I/O and memory space.
++		 */
++
++		io_base = bus_info->io_space.start + IO_ALLOC_OFFSET;
++		mem_base = bus_info->mem_space.start + MEM_ALLOC_OFFSET;
++
++		/*
++		 * Scan the tree, allocating PCI memory and I/O space.
++		 */
++
++#ifdef NL_ORIGINAL
++		layout_bus(pci_bus_b(pci_root.next));
++#else
++		layout_bus(pci_bus_b(pci_root_buses.next));
++#endif
++	}
++
++	/*
++	 * Fix interrupt assignments, etc.
++	 */
++
++	bus_info->fixup(pci_modify);
++}
++
++/*
++ * static void pcibios_claim_resources(struct pci_bus *bus)
++ *
++ * Claim all resources that are assigned to devices on the given bus.
++ *
++ * Parameters:
++ *
++ * bus	- bus.
++ */
++
++static void __init pcibios_claim_resources(struct pci_bus *bus)
++{
++	struct pci_dev *dev;
++	int i;
++	DBG_DEVS(("%s\n", __FUNCTION__));
++#ifdef NL_ORIGINAL
++	while (bus)
++#else
++	while ((bus = pci_find_next_bus(bus)) != NULL)
++#endif
++	{
++
++#ifdef NL_ORIGINAL
++		for (dev = bus->devices; (dev != NULL); dev = dev->sibling)
++#else
++		dev = NULL;
++		while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
++#endif
++		{
++			for (i = 0; i < PCI_NUM_RESOURCES; i++)
++			{
++				struct resource *r = &dev->resource[i];
++				struct resource *pr;
++				struct pci_bus_info *bus_info = 
++					(struct pci_bus_info *) dev->sysdata;
++
++				if ((r->start == 0) || (r->parent != NULL))
++					continue;
++
++#ifdef CONFIG_COLDFIRE
++				if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE)
++					continue;
++#endif /* CONFIG_COLDFIRE */
++#if 1
++				if (r->flags & IORESOURCE_IO)
++					pr = &bus_info->io_space;
++				else
++					pr = &bus_info->mem_space;
++#else
++				if (r->flags & IORESOURCE_IO)
++					pr = &ioport_resource;
++				else
++					pr = &iomem_resource;
++#endif
++				if (request_resource(pr, r) < 0)
++				{
++#ifdef NL_ORIGINAL
++					DBG_DEVS(("PCI: Address space collision on "
++						"region %d of device %s\n", i, dev->name));
++#else
++					printk("PCI: Address space collision on region %d of device %s\n", i, dev->dev.bus_id);
++#endif
++				}
++			}
++		}
++
++#ifdef NL_ORIGINAL
++		if (bus->children)
++			pcibios_claim_resources(bus->children);
++#else
++		if (!list_empty(&bus->children))
++			pcibios_claim_resources(pci_bus_b(bus->children.next));
++#endif
++
++#ifdef NL_ORIGINAL
++		bus = bus->next;
++#endif
++	}
++}
++
++/*
++ * int pcibios_assign_resource(struct pci_dev *dev, int i)
++ *
++ * Assign a new address to a PCI resource.
++ *
++ * Parameters:
++ *
++ * dev	- device.
++ * i	- resource.
++ *
++ * Result: 0 if successful.
++ */
++
++int __init pcibios_assign_resource(struct pci_dev *dev, int i)
++{
++	struct resource *r = &dev->resource[i];
++	struct resource *pr = pci_find_parent_resource(dev, r);
++	unsigned long size = r->end + 1;
++	DBG_DEVS(("%s:IO_ALLOC_OFFSET %x\n", __FUNCTION__, IO_ALLOC_OFFSET));
++	if (!pr)
++		return -EINVAL;
++
++	if (r->flags & IORESOURCE_IO)
++	{
++		DBG_DEVS(("%s:IORESOURCE_IO:start %x, size %lx\n",
++			__FUNCTION__, bus_info->io_space.start, size));
++		if (size > 0x100)
++			return -EFBIG;
++
++#ifdef NL_ORIGINAL
++		if (allocate_resource(pr, r, size, bus_info->io_space.start +
++				      IO_ALLOC_OFFSET,  bus_info->io_space.end, 1024))
++#else
++		if (allocate_resource(pr, r, size, bus_info->io_space.start +
++				   IO_ALLOC_OFFSET,  bus_info->io_space.end, 1024, NULL, NULL))
++#endif
++			return -EBUSY;
++	}
++	else
++	{
++		DBG_DEVS(("%s:IORESOURCE_MEM:start %x, size %lx\n",
++				__FUNCTION__, bus_info->mem_space.start, size));
++#ifdef NL_ORIGINAL
++		if (allocate_resource(pr, r, size, bus_info->mem_space.start +
++				      MEM_ALLOC_OFFSET, bus_info->mem_space.end, size))
++#else
++		if (allocate_resource(pr, r, size, bus_info->io_space.start +
++				   IO_ALLOC_OFFSET,  bus_info->io_space.end, 1024, NULL, NULL))
++#endif
++			return -EBUSY;
++	}
++
++	if (i < 6)
++		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, r->start);
++
++	return 0;
++}
++
++void pcibios_fixup_bus(struct pci_bus *bus)
++{
++	struct pci_dev *dev;
++	void *sysdata;
++
++	sysdata = (bus->parent) ? bus->parent->sysdata : bus->sysdata;
++
++#ifdef NL_ORIGINAL
++	for (dev = bus->devices; (dev != NULL); dev = dev->sibling)
++#else
++	dev = NULL;
++	while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
++#endif
++		dev->sysdata = sysdata;
++}
++
++int __init pcibios_init(void)
++{
++	printk("Linux/m68k PCI BIOS32 revision %x.%02x\n", MAJOR_REV, MINOR_REV);
++
++	bus_info = NULL;
++#ifdef CONFIG_COLDFIRE
++	bus_info = init_coldfire_pci();
++#endif /* CONFIG_COLDFIRE */
++#ifdef CONFIG_HADES
++	if (MACH_IS_HADES)
++		bus_info = init_hades_pci();
++#endif
++	if (bus_info != NULL)
++	{
++		printk("PCI: Probing PCI hardware\n");
++		pci_scan_bus(0, bus_info->m68k_pci_ops, bus_info);
++		pcibios_fixup();
++#ifdef NL_ORIGINAL
++		pcibios_claim_resources(pci_root);
++#else
++		pcibios_claim_resources(pci_bus_b(pci_root_buses.next));
++#endif
++	}
++	else
++		printk("PCI: No PCI bus detected\n");
++	return 0;
++}
++
++subsys_initcall(pcibios_init);
++
++char * pcibios_setup(char *str)
++{
++	if (!strcmp(str, "nomodify"))
++	{
++		pci_modify = 0;
++		return NULL;
++	}
++	else if (!strcmp(str, "skipvga"))
++	{
++		skip_vga = 1;
++		return NULL;
++	}
++	else if (!strcmp(str, "noburst"))
++	{
++		disable_pci_burst = 1;
++		return NULL;
++	}
++
++	return str;
++}
++#endif /* CONFIG_PCI */
+--- a/arch/m68k/kernel/dma.c
++++ b/arch/m68k/kernel/dma.c
+@@ -11,13 +11,24 @@
+ #include <linux/kernel.h>
+ #include <linux/scatterlist.h>
+ #include <linux/vmalloc.h>
+-
++#include <linux/pci.h>
+ #include <asm/pgalloc.h>
+ 
+ void *dma_alloc_coherent(struct device *dev, size_t size,
+ 			 dma_addr_t *handle, gfp_t flag)
+ {
+-#ifndef CONFIG_M5445X
++#if	defined(CONFIG_M547X_8X) | defined(CONFIG_M54455)
++        /*
++	* On the M5445x platform the memory allocated with GFP_DMA
++	* is guaranteed to be DMA'able.
++	*/
++        void *addr;
++
++        size = PAGE_ALIGN(size);
++        addr = kmalloc(size, GFP_DMA);
++        *handle = virt_to_phys(addr);
++        return addr;
++#else
+ 	struct page *page, **map;
+ 	pgprot_t pgprot;
+ 	void *addr;
+@@ -56,17 +67,6 @@ void *dma_alloc_coherent(struct device *
+ 	kfree(map);
+ 
+ 	return addr;
+-#else
+-	/*
+-	 * On the M5445x platform the memory allocated with GFP_DMA
+-	 * is guaranteed to be DMA'able.
+-	 */
+-	void *addr;
+-
+-	size = PAGE_ALIGN(size);
+-	addr = kmalloc(size, GFP_DMA);
+-	*handle = virt_to_phys(addr);
+-	return addr;
+ #endif
+ }
+ EXPORT_SYMBOL(dma_alloc_coherent);
+@@ -75,10 +75,10 @@ void dma_free_coherent(struct device *de
+ 		       void *addr, dma_addr_t handle)
+ {
+ 	pr_debug("dma_free_coherent: %p, %x\n", addr, handle);
+-#ifndef CONFIG_M5445X
+-	vfree(addr);
+-#else
++#if	defined(CONFIG_M547X_8X) | defined(CONFIG_M54455)
+ 	kfree(addr);
++#else
++	vfree(addr);
+ #endif
+ }
+ EXPORT_SYMBOL(dma_free_coherent);
+--- a/arch/m68k/mm/kmap.c
++++ b/arch/m68k/mm/kmap.c
+@@ -153,6 +153,10 @@ void __iomem *__ioremap(unsigned long ph
+ 		 */
+ 		return (void __iomem *)physaddr;
+ 	}
++        if ((physaddr >= 0xd0000000) && (physaddr + size < 0xd800ffff)) {
++                printk("ioremap:PCI 0x%lx,0x%lx(%d) - PCI area hit\n", physaddr, size, cacheflag);
++                return (void *)physaddr;
++        }
+ #endif
+ 
+ #ifdef DEBUG
+@@ -284,7 +288,12 @@ void __iounmap(void *addr, unsigned long
+ 	pgd_t *pgd_dir;
+ 	pmd_t *pmd_dir;
+ 	pte_t *pte_dir;
+-
++#ifdef CONFIG_M547X_8X
++        if ((addr >= (void*)0xd0000000) && (addr + size < (void*)0xd800ffff)) {
++                printk("%s: PCI address\n",__FUNCTION__);
++                return;
++        }
++#endif
+ 	while ((long)size > 0) {
+ 		pgd_dir = pgd_offset_k(virtaddr);
+ 		if (pgd_bad(*pgd_dir)) {
+--- a/drivers/pci/access.c
++++ b/drivers/pci/access.c
+@@ -23,6 +23,7 @@ static DEFINE_SPINLOCK(pci_lock);
+ #define PCI_word_BAD (pos & 1)
+ #define PCI_dword_BAD (pos & 3)
+ 
++#ifdef NL_ORIGINAL
+ #define PCI_OP_READ(size,type,len) \
+ int pci_bus_read_config_##size \
+ 	(struct pci_bus *bus, unsigned int devfn, int pos, type *value)	\
+@@ -37,7 +38,20 @@ int pci_bus_read_config_##size \
+ 	spin_unlock_irqrestore(&pci_lock, flags);			\
+ 	return res;							\
+ }
+-
++#else /* NL_ORIGINAL */
++#define PCI_OP_READ(size,type,len) \
++int pci_bus_read_config_##size \
++        (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \
++{                                                                       \
++        int res;                                                        \
++        unsigned long flags;                                            \
++        if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;       \
++        spin_lock_irqsave(&pci_lock, flags);                            \
++        res = bus->ops->read(bus, devfn, pos, len, (u32 *)value);       \
++        spin_unlock_irqrestore(&pci_lock, flags);                       \
++        return res;                                                     \
++}
++#endif /* NL_ORIGINAL */
+ #define PCI_OP_WRITE(size,type,len) \
+ int pci_bus_write_config_##size \
+ 	(struct pci_bus *bus, unsigned int devfn, int pos, type value)	\
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -6,7 +6,7 @@ ifeq ($(CONFIG_USB_DEBUG),y)
+ 	EXTRA_CFLAGS		+= -DDEBUG
+ endif
+ 
+-obj-$(CONFIG_PCI)		+= pci-quirks.o
++#obj-$(CONFIG_PCI)		+= pci-quirks.o
+ 
+ obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
+ obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
+--- /dev/null
++++ b/include/asm-m68k/5445x_pci.h
+@@ -0,0 +1,94 @@
++/*
++ * asm-m68k/pci.h - m68k specific PCI declarations.
++ *
++ * Coldfire Implementation Copyright (c) 2007 Freescale Semiconductor, Inc.
++ *	Kurt Mahan <kmahan@freescale.com>
++ */
++#ifndef _ASM_M68K_5445X_PCI_H
++#define _ASM_M68K_5445x_PCI_H
++
++#ifndef CONFIG_PCI
++/*
++ * The PCI address space does equal the physical memory
++ * address space.  The networking and block device layers use
++ * this boolean for bounce buffer decisions.
++ */
++#define PCI_DMA_BUS_IS_PHYS		(1)
++#else
++#include <asm-generic/pci-dma-compat.h>
++
++/*
++ * The PCI address space does equal the physical memory
++ * address space.  The networking and block device layers use
++ * this boolean for bounce buffer decisions.
++ */
++#define PCI_DMA_BUS_IS_PHYS		(1)
++
++#define PCIBIOS_MIN_IO			0x00004000
++#define PCIBIOS_MIN_MEM			0x02000000
++
++#define pcibios_assign_all_busses()	0
++#define pcibios_scan_all_fns(a, b)	0
++
++static inline void
++pcibios_set_master(struct pci_dev *dev)
++{
++	/* no special bus mastering setup handling */
++}
++
++static inline void
++pcibios_penalize_isa_irq(int irq, int active)
++{
++	/* no dynamic PCI IRQ allocation */
++}
++
++#if 0
++static inline void
++pcibios_add_platform_entries(struct pci_dev *dev)
++{
++	/* no special handling */
++}
++#endif
++
++static inline void
++pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
++			 struct resource *res)
++{
++#ifdef CONFIG_M54455
++	if ((res->start == 0xa0000000) || (res->start == 0xa8000000)) {
++		/* HACK!  FIX! kludge to fix bridge mapping */
++		region->start = res->start & 0x0fffffff;
++		region->end = res->end & 0x0fffffff;
++	} else {
++		region->start = res->start;
++		region->end = res->end;
++	}
++#else
++	region->start = res->start;
++	region->end = res->end;
++#endif
++}
++
++static inline void
++pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
++			struct pci_bus_region *region)
++{
++	res->start = region->start;
++	res->end = region->end;
++}
++
++static inline struct resource *
++pcibios_select_root(struct pci_dev *pdev, struct resource *res)
++{
++	struct resource *root = NULL;
++
++	if (res->flags & IORESOURCE_IO)
++		root = &ioport_resource;
++	if (res->flags & IORESOURCE_MEM)
++		root = &iomem_resource;
++
++	return root;
++}
++
++#endif /* CONFIG_PCI */
++#endif /* _ASM_M68K_5445X_PCI_H */
+--- /dev/null
++++ b/include/asm-m68k/548x_pci.h
+@@ -0,0 +1,99 @@
++#ifndef _ASM_M68K_548X_PCI_H
++#define _ASM_M68K_548X_PCI_H
++
++/*
++ * asm-m68k/pci_m68k.h - m68k specific PCI declarations.
++ *
++ * Written by Wout Klaren.
++ */
++#include <linux/mm.h>
++#include <asm/scatterlist.h>
++
++#include <asm-generic/pci.h>
++
++struct pci_ops;
++
++/*
++ * Structure with hardware dependent information and functions of the
++ * PCI bus.
++ */
++
++struct pci_bus_info
++{
++	/*
++	 * Resources of the PCI bus.
++	 */
++
++	struct resource mem_space;
++	struct resource io_space;
++
++	/*
++	 * System dependent functions.
++	 */
++
++	struct pci_ops *m68k_pci_ops;
++
++	void (*fixup)(int pci_modify);
++	void (*conf_device)(struct pci_dev *dev);
++};
++
++#define pcibios_assign_all_busses()	0
++#define pcibios_scan_all_fns(a, b)	0
++
++static inline void pcibios_set_master(struct pci_dev *dev)
++{
++	/* No special bus mastering setup handling */
++}
++
++static inline void pcibios_penalize_isa_irq(int irq)
++{
++	/* We don't do dynamic PCI IRQ allocation */
++}
++
++#ifndef CONFIG_COLDFIRE
++/* The PCI address space does equal the physical memory
++ * address space.  The networking and block device layers use
++ * this boolean for bounce buffer decisions.
++ */
++#define PCI_DMA_BUS_IS_PHYS	(1)
++
++#define PCIBIOS_MIN_IO 		0x00004000
++#define PCIBIOS_MIN_MEM 	0x04000000
++
++#else /* !CONFIG_COLDFIRE */
++#include <asm-generic/pci-dma-compat.h>
++#define PCI_DMA_BASE 		/*0x40000000*/0	/* PCI-DMA window base 		*/
++
++extern struct pci_bus_info *__init init_coldfire_pci(void);
++extern void * pci_alloc_son(struct pci_dev *, size_t,
++                            dma_addr_t *, int);
++/*
++ * The PCI address space equal the virtual memory
++ * address space on m547X/m548X.
++ */
++#define PCI_DMA_BUS_IS_PHYS	(1)
++
++#define PCIBIOS_MIN_IO 		0x00000100
++#define PCIBIOS_MIN_MEM 	0x02000000
++
++struct scatterlist;
++
++
++/* This is always fine. */
++#define pci_dac_dma_supported(pci_dev, mask)	(1)
++
++
++/* These macros should be used after a pci_map_sg call has been done
++ * to get bus addresses of each of the SG entries and their lengths.
++ * You should only work with the number of sg entries pci_map_sg
++ * returns.
++ */
++#define sg_dma_address(sg)	((sg)->dma_address)
++#define sg_dma_len(sg)		((sg)->length)
++
++static inline void pcibios_align_resource(void *data, struct resource *res, unsigned long size, unsigned long align)
++{
++}
++
++#endif /* !CONFIG_COLDFIRE*/
++#endif /* _ASM_M68K_548X_PCI_H */
+--- a/include/asm-m68k/io.h
++++ b/include/asm-m68k/io.h
+@@ -204,6 +204,12 @@ static inline u16 __iomem *isa_mtw(unsig
+ #define isa_outw(val,port) (ISA_SEX ? out_be16(isa_itw(port),(val)) : out_le16(isa_itw(port),(val)))
+ #define isa_outl(val,port) (ISA_SEX ? out_be32(isa_itl(port),(val)) : out_le32(isa_itl(port),(val)))
+ 
++#ifndef CONFIG_COLDFIRE
++#define isa_readb(p)       in_8(isa_mtb(p))
++#define isa_readw(p)       (ISA_SEX ? in_be16(isa_mtw(p)) : in_le16(isa_mtw(p)))
++#define isa_writeb(val,p)  out_8(isa_mtb(p),(val))
++#define isa_writew(val,p)  (ISA_SEX ? out_be16(isa_mtw(p),(val)) : out_le16(isa_mtw(p),(val)))
++#else
+ #define isa_readb(p)       in_8(isa_mtb((unsigned long)(p)))
+ #define isa_readw(p)       \
+ 	(ISA_SEX ? in_be16(isa_mtw((unsigned long)(p)))	\
+@@ -212,7 +218,7 @@ static inline u16 __iomem *isa_mtw(unsig
+ #define isa_writew(val,p)  \
+ 	(ISA_SEX ? out_be16(isa_mtw((unsigned long)(p)),(val))	\
+ 		 : out_le16(isa_mtw((unsigned long)(p)),(val)))
+-
++#endif
+ static inline void isa_delay(void)
+ {
+   switch(ISA_TYPE)
+@@ -285,6 +291,29 @@ static inline void isa_delay(void)
+ #endif /* CONFIG_ISA */
+ 
+ #if defined(CONFIG_PCI)
++#ifdef CONFIG_COLDFIRE
++#define inb_p   inb
++#define inw_p   inw
++#define inl_p   inl
++#define outb_p  outb
++#define outw_p  outw
++#define outl_p  outl
++
++unsigned char  pci_inb(long addr);
++unsigned short pci_inw(long addr);
++unsigned long  pci_inl(long addr);
++void pci_outb(unsigned char  val, long addr);
++void pci_outw(unsigned short val, long addr);
++void pci_outl(unsigned long  val, long addr);
++
++void pci_insb(volatile unsigned char* addr, unsigned char* buf, int len);
++void pci_insw(volatile unsigned short* addr, unsigned short* buf, int len);
++void pci_insl(volatile unsigned long* addr, unsigned long* buf, int len);
++
++void pci_outsb(volatile unsigned char* addr, const unsigned char* buf, int len);
++void pci_outsw(volatile unsigned short* addr, const unsigned short* buf, int len);
++void pci_outsl(volatile unsigned long* addr, const unsigned long* buf, int len);
++#endif
+ 
+ #define readl(addr)      in_le32(addr)
+ #define writel(val,addr) out_le32((addr),(val))
+@@ -300,6 +329,7 @@ static inline void isa_delay(void)
+ #define readl_relaxed(addr) readl(addr)
+ 
+ #ifndef CONFIG_ISA
++#ifndef CONFIG_COLDFIRE
+ #define inb(port)      in_8(port)
+ #define outb(val,port) out_8((port),(val))
+ #define inw(port)      in_le16(port)
+@@ -319,6 +349,30 @@ static inline void isa_delay(void)
+ #define outsl(port, buf, nr)	\
+ 		raw_outsw_swapw((u16 *)(port), (u16 *)(buf), (nr)<<1)
+ #else
++#define inb(port)      pci_inb(port)
++#define outb(val,port) pci_outb((val),(port))
++#define inw(port)      pci_inw(port)
++#define outw(val,port) pci_outw((val),(port))
++#define insb(a,b,c)  pci_insb((volatile unsigned char*)a,(unsigned char*)b,c)
++#define insw(a,b,c)  pci_insw((volatile unsigned short*)a,(const unsigned short*)b,c)
++#define insl(a,b,c)  pci_insl((volatile unsigned long*)a,(const unsigned long*)b,c)
++#define outsb(a,b,c) pci_outsb((volatile unsigned char*)a,(const unsigned char*)b,c)
++#define outsw(a,b,c) pci_outsw((volatile unsigned short*)a,(const unsigned short*)b,c)
++#define outsl(a,b,c) pci_outsl((volatile unsigned long*)a,(const unsigned long*)b,c)
++#define inl(port)        pci_inl(port)
++#define outl(val,port)   pci_outl((val),(port))
++#endif
++
++#ifndef CONFIG_COLDFIRE
++#define __raw_readb readb
++#define __raw_readw readw
++#define __raw_readl readl
++#define __raw_writeb writeb
++#define __raw_writew writew
++#define __raw_writel writel
++#endif
++
++#else
+ /*
+  * kernel with both ISA and PCI compiled in, those have
+  * conflicting defs for in/out. Simply consider port < 1024
+@@ -432,6 +486,15 @@ static inline void memcpy_toio(volatile 
+ #define xlate_dev_kmem_ptr(p)	p
+ 
+ #ifdef CONFIG_COLDFIRE
++#define __raw_readb(addr) \
++    ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
++#define __raw_readw(addr) \
++    ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
++#define __raw_readl(addr) \
++    ({ unsigned long __v = (*(volatile unsigned long *) (addr)); __v; })
++#define __raw_writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
++#define __raw_writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
++#define __raw_writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+ 
+ #define memset_io(a, b, c) memset((void *)(a), (b), (c))
+ #define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
+--- /dev/null
++++ b/include/asm-m68k/m5485pci.h
+@@ -0,0 +1,330 @@
++/*
++ *	m5485pci.h -- ColdFire 547x/548x PCI controller support.
++ */
++#ifndef __MCF548X_PCI_H__
++#define __MCF548X_PCI_H__
++
++
++/* PCI Type 0 Configuration Registers */
++#define MCF_PCIIDR        MCF_REG32(0x000B00)   /* PCI Device ID/Vendor ID      */
++#define MCF_PCISCR        MCF_REG32(0x000B04)   /* PCI Status/Command           */
++#define MCF_PCICCRIR      MCF_REG32(0x000B08)   /* PCI Class Code / Revision ID */
++#define MCF_PCICR1        MCF_REG32(0x000B0C)   /* PCI Configuration 1 Register */
++#define MCF_PCIBAR0       MCF_REG32(0x000B10)   /* PCI Base Address Register 0  */
++#define MCF_PCIBAR1       MCF_REG32(0x000B14)   /* PCI Base Address Register 1  */
++#define MCF_PCICCPR       MCF_REG32(0x000B28)   /* PCI Cardbus CIS Pointer      */
++#define MCF_PCISID        MCF_REG32(0x000B2C)   /* Subsystem ID/Subsystem Vendor ID*/
++#define MCF_PCIERBAR      MCF_REG32(0x000B30)   /* PCI Expansion ROM            */
++#define MCF_PCICPR        MCF_REG32(0x000B30)   /* PCI Capabilities Pointer     */
++#define MCF_PCICR2        MCF_REG32(0x000B3C)   /* PCI Configuration Register 2 */
++
++/* General Control/Status Registers */
++#define MCF_PCIGSCR       MCF_REG32(0x000B60)   /* Global Status/Control Register   */
++#define MCF_PCITBATR0     MCF_REG32(0x000B64)   /* Target Base Address Translation 0*/
++#define MCF_PCITBATR1     MCF_REG32(0x000B68)   /* Target Base Address Translation 1*/
++#define MCF_PCITCR        MCF_REG32(0x000B6C)   /* Target Control Register          */
++#define MCF_PCIIW0BTAR    MCF_REG32(0x000B70)   /* Initiator Window 0 Base Address  */
++#define MCF_PCIIW1BTAR    MCF_REG32(0x000B74)   /* Initiator Window 1 Base Address  */
++#define MCF_PCIIW2BTAR    MCF_REG32(0x000B78)   /* Initiator Window 2 Base  Address */
++#define MCF_PCIIWCR       MCF_REG32(0x000B80)   /* Initiator Window Configuration   */
++#define MCF_PCIICR        MCF_REG32(0x000B84)   /* Initiator Control Register       */
++#define MCF_PCIISR        MCF_REG32(0x000B88)   /* Initiator Status Register        */
++#define MCF_PCICAR        MCF_REG32(0x000BF8)   /* Configuration Address Register   */
++
++/* CommBus FIFO Transmit Interface Registers */
++#define MCF_PCITPSR       MCF_REG32(0x008400)   /* Tx Packet Size Register      	*/
++#define MCF_PCITSAR       MCF_REG32(0x008404)   /* Tx Start Address Register        */
++#define MCF_PCITTCR       MCF_REG32(0x008408)   /* Tx Transaction Control Register  */
++#define MCF_PCITER        MCF_REG32(0x00840C)   /* Tx Enables Register          	*/
++#define MCF_PCITNAR       MCF_REG32(0x008410)   /* Tx Next Address Register         */
++#define MCF_PCITLWR       MCF_REG32(0x008414)   /* Tx Last Word Register        	*/
++#define MCF_PCITDCR       MCF_REG32(0x008418)   /* Tx Done Counts Register          */
++#define MCF_PCITSR        MCF_REG32(0x00841C)   /* Tx Status Register           	*/
++#define MCF_PCITFDR       MCF_REG32(0x008440)   /* Tx FIFO Data Register        	*/
++#define MCF_PCITFSR       MCF_REG32(0x008444)   /* Tx FIFO Status Register          */
++#define MCF_PCITFCR       MCF_REG32(0x008448)   /* Tx FIFO Control Register         */
++#define MCF_PCITFAR       MCF_REG32(0x00844C)   /* Tx FIFO Alarm Register       	*/
++#define MCF_PCITFRPR      MCF_REG32(0x008450)   /* Tx FIFO Read Pointer Register    */
++#define MCF_PCITFWPR      MCF_REG32(0x008454)   /* Tx FIFO Write Pointer Register   */
++
++/* CommBus FIFO Receive Interface Registers */
++#define MCF_PCIRPSR       MCF_REG32(0x008480)   /* Tx Packet Size Register      	*/
++#define MCF_PCIRSAR       MCF_REG32(0x008484)   /* Tx Start Address Register        */
++#define MCF_PCIRTCR       MCF_REG32(0x008488)   /* Tx Transaction Control Register  */
++#define MCF_PCIRER        MCF_REG32(0x00848C)   /* Tx Enables Register          	*/
++#define MCF_PCIRNAR       MCF_REG32(0x008490)   /* Tx Next Address Register         */
++#define MCF_PCIRDCR       MCF_REG32(0x008498)   /* Tx Done Counts Register          */
++#define MCF_PCIRSR        MCF_REG32(0x00849C)   /* Tx Status Register           	*/
++#define MCF_PCIRFDR       MCF_REG32(0x0084C0)   /* Tx FIFO Data Register        	*/
++#define MCF_PCIRFSR       MCF_REG32(0x0084C4)   /* Tx FIFO Status Register          */
++#define MCF_PCIRFCR       MCF_REG32(0x0084C8)   /* Tx FIFO Control Register         */
++#define MCF_PCIRFAR       MCF_REG32(0x0084CC)   /* Tx FIFO Alarm Register       	*/
++#define MCF_PCIRFRPR      MCF_REG32(0x0084D0)   /* Tx FIFO Read Pointer Register    */
++#define MCF_PCIRFWPR      MCF_REG32(0x0084D4)   /* Tx FIFO Write Pointer Register   */
++
++/* PCI Arbiter Registers */
++#define MCF_PCIARB_PACR   MCF_REG32(0x000C00)
++#define MCF_PCIARB_PASR   MCF_REG32(0x000C04)
++
++
++/* Bit definitions and macros for MCF_PCIIDR */
++#define MCF_PCIIDR_VENDORID(x)            (((x)&0x0000FFFF)<<0)
++#define MCF_PCIIDR_DEVICEID(x)            (((x)&0x0000FFFF)<<16)
++
++/* Bit definitions and macros for MCF_PCISCR */
++#define MCF_PCISCR_M      (0x00000002)
++#define MCF_PCISCR_B      (0x00000004)
++#define MCF_PCISCR_SP     (0x00000008)
++#define MCF_PCISCR_MW     (0x00000010)
++#define MCF_PCISCR_PER    (0x00000040)
++#define MCF_PCISCR_S      (0x00000100)
++#define MCF_PCISCR_F      (0x00000200)
++#define MCF_PCISCR_C      (0x00100000)
++#define MCF_PCISCR_66M    (0x00200000)
++#define MCF_PCISCR_R      (0x00400000)
++#define MCF_PCISCR_FC     (0x00800000)
++#define MCF_PCISCR_DP     (0x01000000)
++#define MCF_PCISCR_DT(x)  (((x)&0x00000003)<<25)
++#define MCF_PCISCR_TS     (0x08000000)
++#define MCF_PCISCR_TR     (0x10000000)
++#define MCF_PCISCR_MA     (0x20000000)
++#define MCF_PCISCR_SE     (0x40000000)
++#define MCF_PCISCR_PE     (0x80000000)
++
++/* Bit definitions and macros for MCF_PCICCRIR */
++#define MCF_PCICCRIR_REVID(x)             (((x)&0x000000FF)<<0)
++#define MCF_PCICCRIR_CLASSCODE(x)         (((x)&0x00FFFFFF)<<8)
++
++/* Bit definitions and macros for MCF_PCICR1 */
++#define MCF_PCICR1_CACHELINESIZE(x)       (((x)&0x0000000F)<<0)
++#define MCF_PCICR1_LATTIMER(x)            (((x)&0x000000FF)<<8)
++#define MCF_PCICR1_HEADERTYPE(x)          (((x)&0x000000FF)<<16)
++#define MCF_PCICR1_BIST(x)                (((x)&0x000000FF)<<24)
++
++/* Bit definitions and macros for MCF_PCIBAR# */
++#define MCF_PCIBAR0_ADDR(x)               (((x)&0x00003FFF)<<18)
++#define MCF_PCIBAR1_ADDR(x)               (((x)&0x00000003)<<30)
++
++/* Bit definitions and macros for MCF_PCICR2 */
++#define MCF_PCICR2_INTLINE(x)             (((x)&0x000000FF)<<0)
++#define MCF_PCICR2_INTPIN(x)              (((x)&0x000000FF)<<8)
++#define MCF_PCICR2_MINGNT(x)              (((x)&0x000000FF)<<16)
++#define MCF_PCICR2_MAXLAT(x)              (((x)&0x000000FF)<<24)
++
++/* Bit definitions and macros for MCF_PCIGSCR */
++#define MCF_PCIGSCR_PR                    (0x00000001)
++#define MCF_PCIGSCR_SEE                   (0x00001000)
++#define MCF_PCIGSCR_PEE                   (0x00002000)
++#define MCF_PCIGSCR_SE                    (0x10000000)
++#define MCF_PCIGSCR_PE                    (0x20000000)
++
++/* Bit definitions and macros for MCF_PCITBATR0 */
++#define MCF_PCITBATR0_EN                  (0x00000001)
++#define MCF_PCITBATR0_BAT0(x)             (((x)&0x00003FFF)<<18)
++
++/* Bit definitions and macros for MCF_PCITBATR1 */
++#define MCF_PCITBATR1_EN                  (0x00000001)
++#define MCF_PCITBATR1_BAT1(x)             (((x)&0x00000003)<<30)
++
++/* Bit definitions and macros for MCF_PCITCR */
++#define MCF_PCITCR_P                      (0x00010000)
++#define MCF_PCITCR_LD                     (0x01000000)
++
++/* Bit definitions and macros for MCF_PCIIW0BTAR */
++#define MCF_PCIIW0BTAR_WTA0(x)            (((x)&0x000000FF)<<8)
++#define MCF_PCIIW0BTAR_WAM0(x)            (((x)&0x000000FF)<<16)
++#define MCF_PCIIW0BTAR_WBA0(x)            (((x)&0x000000FF)<<24)
++
++/* Bit definitions and macros for MCF_PCIIW1BTAR */
++#define MCF_PCIIW1BTAR_WTA1(x)            (((x)&0x000000FF)<<8)
++#define MCF_PCIIW1BTAR_WAM1(x)            (((x)&0x000000FF)<<16)
++#define MCF_PCIIW1BTAR_WBA1(x)            (((x)&0x000000FF)<<24)
++
++/* Bit definitions and macros for MCF_PCIIW2BTAR */
++#define MCF_PCIIW2BTAR_WTA2(x)            (((x)&0x000000FF)<<8)
++#define MCF_PCIIW2BTAR_WAM2(x)            (((x)&0x000000FF)<<16)
++#define MCF_PCIIW2BTAR_WBA2(x)            (((x)&0x000000FF)<<24)
++
++/* Bit definitions and macros for MCF_PCIIWCR */
++#define MCF_PCIIWCR_WINCTRL2(x)           (((x)&0x0000000F)<<8)
++#define MCF_PCIIWCR_WINCTRL1(x)           (((x)&0x0000000F)<<16)
++#define MCF_PCIIWCR_WINCTRL0(x)           (((x)&0x0000000F)<<24)
++#define MCF_PCIIWCR_WINCTRL0_MEMREAD      (0x01000000)
++#define MCF_PCIIWCR_WINCTRL0_MEMRDLINE    (0x03000000)
++#define MCF_PCIIWCR_WINCTRL0_MEMRDMUL     (0x05000000)
++#define MCF_PCIIWCR_WINCTRL0_IO           (0x09000000)
++#define MCF_PCIIWCR_WINCTRL0_E            (0x01000000)
++#define MCF_PCIIWCR_WINCTRL1_MEMREAD      (0x00010000)
++#define MCF_PCIIWCR_WINCTRL1_MEMRDLINE    (0x00030000)
++#define MCF_PCIIWCR_WINCTRL1_MEMRDMUL     (0x00050000)
++#define MCF_PCIIWCR_WINCTRL1_IO           (0x00090000)
++#define MCF_PCIIWCR_WINCTRL1_E            (0x00010000)
++#define MCF_PCIIWCR_WINCTRL2_MEMREAD      (0x00000100)
++#define MCF_PCIIWCR_WINCTRL2_MEMRDLINE    (0x00000300)
++#define MCF_PCIIWCR_WINCTRL2_MEMRDMUL     (0x00000500)
++#define MCF_PCIIWCR_WINCTRL2_IO           (0x00000900)
++#define MCF_PCIIWCR_WINCTRL2_E            (0x00000100)
++
++
++/* Bit definitions and macros for MCF_PCIICR */
++#define MCF_PCIICR_MAXRETRY(x)            (((x)&0x000000FF)<<0)
++#define MCF_PCIICR_TAE                    (0x01000000)
++#define MCF_PCIICR_IAE                    (0x02000000)
++#define MCF_PCIICR_REE                    (0x04000000)
++
++/* Bit definitions and macros for MCF_PCIISR */
++#define MCF_PCIISR_TA                     (0x01000000)
++#define MCF_PCIISR_IA                     (0x02000000)
++#define MCF_PCIISR_RE                     (0x04000000)
++
++/* Bit definitions and macros for MCF_PCICAR */
++#define MCF_PCICAR_DWORD(x)               (((x)&0x0000003F)<<2)
++#define MCF_PCICAR_FUNCNUM(x)             (((x)&0x00000007)<<8)
++#define MCF_PCICAR_DEVNUM(x)              (((x)&0x0000001F)<<11)
++#define MCF_PCICAR_BUSNUM(x)              (((x)&0x000000FF)<<16)
++#define MCF_PCICAR_E                      (0x80000000)
++
++/* Bit definitions and macros for MCF_PCITPSR */
++#define MCF_PCITPSR_PKTSIZE(x)            (((x)&0x0000FFFF)<<16)
++
++/* Bit definitions and macros for MCF_PCITTCR */
++#define MCF_PCITTCR_DI                    (0x00000001)
++#define MCF_PCITTCR_W                     (0x00000010)
++#define MCF_PCITTCR_MAXBEATS(x)           (((x)&0x00000007)<<8)
++#define MCF_PCITTCR_MAXRETRY(x)           (((x)&0x000000FF)<<16)
++#define MCF_PCITTCR_PCICMD(x)             (((x)&0x0000000F)<<24)
++
++/* Bit definitions and macros for MCF_PCITER */
++#define MCF_PCITER_NE                     (0x00010000)
++#define MCF_PCITER_IAE                    (0x00020000)
++#define MCF_PCITER_TAE                    (0x00040000)
++#define MCF_PCITER_RE                     (0x00080000)
++#define MCF_PCITER_SE                     (0x00100000)
++#define MCF_PCITER_FEE                    (0x00200000)
++#define MCF_PCITER_ME                     (0x01000000)
++#define MCF_PCITER_BE                     (0x08000000)
++#define MCF_PCITER_CM                     (0x10000000)
++#define MCF_PCITER_RF                     (0x40000000)
++#define MCF_PCITER_RC                     (0x80000000)
++
++/* Bit definitions and macros for MCF_PCITDCR */
++#define MCF_PCITDCR_PKTSDONE(x)           (((x)&0x0000FFFF)<<0)
++#define MCF_PCITDCR_BYTESDONE(x)          (((x)&0x0000FFFF)<<16)
++
++/* Bit definitions and macros for MCF_PCITSR */
++#define MCF_PCITSR_IA                     (0x00010000)
++#define MCF_PCITSR_TA                     (0x00020000)
++#define MCF_PCITSR_RE                     (0x00040000)
++#define MCF_PCITSR_SE                     (0x00080000)
++#define MCF_PCITSR_FE                     (0x00100000)
++#define MCF_PCITSR_BE1                    (0x00200000)
++#define MCF_PCITSR_BE2                    (0x00400000)
++#define MCF_PCITSR_BE3                    (0x00800000)
++#define MCF_PCITSR_NT                     (0x01000000)
++
++/* Bit definitions and macros for MCF_PCITFSR */
++#define MCF_PCITFSR_EMT                   (0x00010000)
++#define MCF_PCITFSR_ALARM                 (0x00020000)
++#define MCF_PCITFSR_FU                    (0x00040000)
++#define MCF_PCITFSR_FR                    (0x00080000)
++#define MCF_PCITFSR_OF                    (0x00100000)
++#define MCF_PCITFSR_UF                    (0x00200000)
++#define MCF_PCITFSR_RXW                   (0x00400000)
++
++/* Bit definitions and macros for MCF_PCITFCR */
++#define MCF_PCITFCR_OF_MSK                (0x00080000)
++#define MCF_PCITFCR_UF_MSK                (0x00100000)
++#define MCF_PCITFCR_RXW_MSK               (0x00200000)
++#define MCF_PCITFCR_FAE_MSK               (0x00400000)
++#define MCF_PCITFCR_IP_MSK                (0x00800000)
++#define MCF_PCITFCR_GR(x)                 (((x)&0x00000007)<<24)
++
++/* Bit definitions and macros for MCF_PCITFAR */
++#define MCF_PCITFAR_ALARM(x)              (((x)&0x0000007F)<<0)
++
++/* Bit definitions and macros for MCF_PCITFRPR */
++#define MCF_PCITFRPR_READ(x)              (((x)&0x00000FFF)<<0)
++
++/* Bit definitions and macros for MCF_PCITFWPR */
++#define MCF_PCITFWPR_WRITE(x)             (((x)&0x00000FFF)<<0)
++
++/* Bit definitions and macros for MCF_PCIRPSR */
++#define MCF_PCIRPSR_PKTSIZE(x)            (((x)&0x0000FFFF)<<16)
++
++/* Bit definitions and macros for MCF_PCIRTCR */
++#define MCF_PCIRTCR_DI                    (0x00000001)
++#define MCF_PCIRTCR_W                     (0x00000010)
++#define MCF_PCIRTCR_MAXBEATS(x)           (((x)&0x00000007)<<8)
++#define MCF_PCIRTCR_FB                    (0x00001000)
++#define MCF_PCIRTCR_MAXRETRY(x)           (((x)&0x000000FF)<<16)
++#define MCF_PCIRTCR_PCICMD(x)             (((x)&0x0000000F)<<24)
++
++/* Bit definitions and macros for MCF_PCIRER */
++#define MCF_PCIRER_NE                     (0x00010000)
++#define MCF_PCIRER_IAE                    (0x00020000)
++#define MCF_PCIRER_TAE                    (0x00040000)
++#define MCF_PCIRER_RE                     (0x00080000)
++#define MCF_PCIRER_SE                     (0x00100000)
++#define MCF_PCIRER_FEE                    (0x00200000)
++#define MCF_PCIRER_ME                     (0x01000000)
++#define MCF_PCIRER_BE                     (0x08000000)
++#define MCF_PCIRER_CM                     (0x10000000)
++#define MCF_PCIRER_FE                     (0x20000000)
++#define MCF_PCIRER_RF                     (0x40000000)
++#define MCF_PCIRER_RC                     (0x80000000)
++
++/* Bit definitions and macros for MCF_PCIRDCR */
++#define MCF_PCIRDCR_PKTSDONE(x)           (((x)&0x0000FFFF)<<0)
++#define MCF_PCIRDCR_BYTESDONE(x)          (((x)&0x0000FFFF)<<16)
++
++/* Bit definitions and macros for MCF_PCIRSR */
++#define MCF_PCIRSR_IA                     (0x00010000)
++#define MCF_PCIRSR_TA                     (0x00020000)
++#define MCF_PCIRSR_RE                     (0x00040000)
++#define MCF_PCIRSR_SE                     (0x00080000)
++#define MCF_PCIRSR_FE                     (0x00100000)
++#define MCF_PCIRSR_BE1                    (0x00200000)
++#define MCF_PCIRSR_BE2                    (0x00400000)
++#define MCF_PCIRSR_BE3                    (0x00800000)
++#define MCF_PCIRSR_NT                     (0x01000000)
++
++/* Bit definitions and macros for MCF_PCIRFSR */
++#define MCF_PCIRFSR_EMT                   (0x00010000)
++#define MCF_PCIRFSR_ALARM                 (0x00020000)
++#define MCF_PCIRFSR_FU                    (0x00040000)
++#define MCF_PCIRFSR_FR                    (0x00080000)
++#define MCF_PCIRFSR_OF                    (0x00100000)
++#define MCF_PCIRFSR_UF                    (0x00200000)
++#define MCF_PCIRFSR_RXW                   (0x00400000)
++
++/* Bit definitions and macros for MCF_PCIRFCR */
++#define MCF_PCIRFCR_OF_MSK                (0x00080000)
++#define MCF_PCIRFCR_UF_MSK                (0x00100000)
++#define MCF_PCIRFCR_RXW_MSK               (0x00200000)
++#define MCF_PCIRFCR_FAE_MSK               (0x00400000)
++#define MCF_PCIRFCR_IP_MSK                (0x00800000)
++#define MCF_PCIRFCR_GR(x)                 (((x)&0x00000007)<<24)
++
++/* Bit definitions and macros for MCF_PCIRFAR */
++#define MCF_PCIRFAR_ALARM(x)              (((x)&0x0000007F)<<0)
++
++/* Bit definitions and macros for MCF_PCIRFRPR */
++#define MCF_PCIRFRPR_READ(x)              (((x)&0x00000FFF)<<0)
++
++/* Bit definitions and macros for MCF_PCIRFWPR */
++#define MCF_PCIRFWPR_WRITE(x)             (((x)&0x00000FFF)<<0)
++
++
++/* Bit definitions and macros for MCF_PCIARB_PACR */
++#define MCF_PCIARB_PACR_INTMPRI         (0x00000001)
++#define MCF_PCIARB_PACR_EXTMPRI(x)      (((x)&0x0000001F)<<1)
++#define MCF_PCIARB_PACR_INTMINTEN       (0x00010000)
++#define MCF_PCIARB_PACR_EXTMINTEN(x)    (((x)&0x0000001F)<<17)
++#define MCF_PCIARB_PACR_PKMD            (0x40000000)
++#define MCF_PCIARB_PACR_DS              (0x80000000)
++
++/* Bit definitions and macros for MCF_PCIARB_PASR */
++#define MCF_PCIARB_PASR_ITLMBK          (0x00010000)
++#define MCF_PCIARB_PASR_EXTMBK(x)       (((x)&0x0000001F)<<17)
++
++#endif /* __MCF548X_PCI_H__ */
+--- a/include/asm-m68k/pci.h
++++ b/include/asm-m68k/pci.h
+@@ -1,94 +1,10 @@
+-/*
+- * asm-m68k/pci.h - m68k specific PCI declarations.
+- *
+- * Coldfire Implementation Copyright (c) 2007 Freescale Semiconductor, Inc.
+- *	Kurt Mahan <kmahan@freescale.com>
+- */
+-#ifndef _ASM_M68K_PCI_H
+-#define _ASM_M68K_PCI_H
++#ifndef M68K_PCI_H
++#define M68K_PCI_H
+ 
+-#ifndef CONFIG_PCI
+-/*
+- * The PCI address space does equal the physical memory
+- * address space.  The networking and block device layers use
+- * this boolean for bounce buffer decisions.
+- */
+-#define PCI_DMA_BUS_IS_PHYS		(1)
++#ifdef CONFIG_M5445X
++#include "5445x_pci.h"
+ #else
+-#include <asm-generic/pci-dma-compat.h>
+-
+-/*
+- * The PCI address space does equal the physical memory
+- * address space.  The networking and block device layers use
+- * this boolean for bounce buffer decisions.
+- */
+-#define PCI_DMA_BUS_IS_PHYS		(1)
+-
+-#define PCIBIOS_MIN_IO			0x00004000
+-#define PCIBIOS_MIN_MEM			0x02000000
+-
+-#define pcibios_assign_all_busses()	0
+-#define pcibios_scan_all_fns(a, b)	0
+-
+-static inline void
+-pcibios_set_master(struct pci_dev *dev)
+-{
+-	/* no special bus mastering setup handling */
+-}
+-
+-static inline void
+-pcibios_penalize_isa_irq(int irq, int active)
+-{
+-	/* no dynamic PCI IRQ allocation */
+-}
+-
+-#if 0
+-static inline void
+-pcibios_add_platform_entries(struct pci_dev *dev)
+-{
+-	/* no special handling */
+-}
++#include "548x_pci.h"
+ #endif
+ 
+-static inline void
+-pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+-			 struct resource *res)
+-{
+-#ifdef CONFIG_M54455
+-	if ((res->start == 0xa0000000) || (res->start == 0xa8000000)) {
+-		/* HACK!  FIX! kludge to fix bridge mapping */
+-		region->start = res->start & 0x0fffffff;
+-		region->end = res->end & 0x0fffffff;
+-	} else {
+-		region->start = res->start;
+-		region->end = res->end;
+-	}
+-#else
+-	region->start = res->start;
+-	region->end = res->end;
+-#endif
+-}
+-
+-static inline void
+-pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+-			struct pci_bus_region *region)
+-{
+-	res->start = region->start;
+-	res->end = region->end;
+-}
+-
+-static inline struct resource *
+-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+-{
+-	struct resource *root = NULL;
+-
+-	if (res->flags & IORESOURCE_IO)
+-		root = &ioport_resource;
+-	if (res->flags & IORESOURCE_MEM)
+-		root = &iomem_resource;
+-
+-	return root;
+-}
+-
+-#endif /* CONFIG_PCI */
+-#endif /* _ASM_M68K_PCI_H */
++#endif /* M68K_PCI_H */
+--- a/include/asm-m68k/raw_io.h
++++ b/include/asm-m68k/raw_io.h
+@@ -46,6 +46,29 @@ extern void __iounmap(void *addr, unsign
+ #define out_le16(addr,w) (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w))
+ #define out_le32(addr,l) (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l))
+ 
++#if (defined CONFIG_COLDFIRE) && (defined CONFIG_PCI)
++unsigned char  pci_inb(long addr);
++unsigned short pci_inw(long addr);
++unsigned long  pci_inl(long addr);
++void pci_outb(unsigned char  val, long addr);
++void pci_outw(unsigned short val, long addr);
++void pci_outl(unsigned long  val, long addr);
++unsigned short pci_raw_inw(long addr);
++unsigned long  pci_raw_inl(long addr);
++void pci_raw_outw(unsigned short val, long addr);
++void pci_raw_outl(unsigned long  val, long addr);
++#define raw_inb(port) pci_inb((long)((volatile unsigned char *)(port)))
++#define raw_inw(port) pci_raw_inw((long)((volatile unsigned short *)(port)))
++#define raw_inl(port) pci_raw_inl((long)((volatile unsigned long *)(port)))
++
++#define raw_outb(val,port) pci_outb((val),(long)((volatile unsigned char *)(port)))
++#define raw_outw(val,port) pci_raw_outw((val),(long)((volatile unsigned short *)(port)))
++#define raw_outl(val,port) pci_raw_outl((val),(long)((volatile unsigned long *)(port)))
++
++#define swap_inw(port) pci_inw((long)((volatile unsigned short *)(port)))
++#define swap_outw(val,port) pci_outw((val),(long)((volatile unsigned short *)(port)))
++
++#else
+ #define raw_inb in_8
+ #define raw_inw in_be16
+ #define raw_inl in_be32
+@@ -60,6 +83,9 @@ extern void __iounmap(void *addr, unsign
+ #define __raw_writew(val,addr) out_be16((addr),(val))
+ #define __raw_writel(val,addr) out_be32((addr),(val))
+ 
++#define swap_inw(port) in_le16((port))
++#define swap_outw(val,port) out_le16((port),(val))
++#endif
+ static inline void raw_insb(volatile u8 __iomem *port, u8 *buf, unsigned int len)
+ {
+ 	unsigned int i;
+--- a/include/asm-m68k/virtconvert.h
++++ b/include/asm-m68k/virtconvert.h
+@@ -46,9 +46,14 @@ static inline void *phys_to_virt(unsigne
+ #define virt_to_bus(a) (virt_to_phys(a) + (MACH_IS_HADES ? 0x80000000 : 0))
+ #define bus_to_virt(a) (phys_to_virt((a) - (MACH_IS_HADES ? 0x80000000 : 0)))
+ #else
++#ifdef CONFIG_COLDFIRE
++#define virt_to_bus(a) (a - PAGE_OFFSET + PCI_DMA_BASE)
++#define bus_to_virt(a) (a - PCI_DMA_BASE + PAGE_OFFSET)
++#else /* CONFIG_COLDFIRE */
+ #define virt_to_bus virt_to_phys
+ #define bus_to_virt phys_to_virt
+ #endif
++#endif
+ 
+ #endif
+ #endif
+--- a/include/linux/pci.h
++++ b/include/linux/pci.h
+@@ -458,8 +458,10 @@ int __must_check pcibios_enable_device(s
+ char *pcibios_setup(char *str);
+ 
+ /* Used only when drivers/pci/setup.c is used */
++#ifndef CONFIG_COLDFIRE
+ void pcibios_align_resource(void *, struct resource *, resource_size_t,
+ 				resource_size_t);
++#endif
+ void pcibios_update_irq(struct pci_dev *, int irq);
+ 
+ /* Generic PCI functions used internally */
diff --git a/target/linux/coldfire/patches/079-m547x_8x_pci_video_sm712.patch b/target/linux/coldfire/patches/079-m547x_8x_pci_video_sm712.patch
new file mode 100644
index 0000000000..7eb27ee686
--- /dev/null
+++ b/target/linux/coldfire/patches/079-m547x_8x_pci_video_sm712.patch
@@ -0,0 +1,1266 @@
+From a4c49cdc530046ded7a9fbfe9e13eab10d3973c7 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 10 Jul 2008 19:19:29 -0600
+Subject: [PATCH] Add PCI Video SM712.
+
+LTIBName: m547x-8x-pci-video-sm712
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+Signed-off-by: Shrek Wu <b16972@freescale.com>
+---
+ drivers/video/Kconfig           |   10 +
+ drivers/video/Makefile          |    1 +
+ drivers/video/cfbimgblt.c       |    8 +-
+ drivers/video/console/bitblit.c |   12 +
+ drivers/video/console/fbcon.c   |    7 +-
+ drivers/video/smifb.c           |  949 +++++++++++++++++++++++++++++++++++++++
+ drivers/video/smifb.h           |  149 ++++++
+ include/linux/fb.h              |   13 +-
+ 8 files changed, 1142 insertions(+), 7 deletions(-)
+ create mode 100644 drivers/video/smifb.c
+ create mode 100644 drivers/video/smifb.h
+
+--- a/drivers/video/Kconfig
++++ b/drivers/video/Kconfig
+@@ -201,6 +201,16 @@ config FB_TILEBLITTING
+ comment "Frame buffer hardware drivers"
+ 	depends on FB
+ 
++config FB_SMI
++	tristate "SiliconMotion Lynx support"
++	depends on FB && PCI
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	---help---
++	  This enables support for the Silicon Motion Lynx family of graphic
++	  chips. It has been tested on ColdFire.
++
+ config FB_CIRRUS
+ 	tristate "Cirrus Logic support"
+ 	depends on FB && (ZORRO || PCI)
+--- a/drivers/video/Makefile
++++ b/drivers/video/Makefile
+@@ -28,6 +28,7 @@ obj-$(CONFIG_FB_DDC)           += fb_ddc
+ obj-$(CONFIG_FB_DEFERRED_IO)   += fb_defio.o
+ 
+ # Hardware specific drivers go first
++obj-$(CONFIG_FB_SMI)              += smifb.o
+ obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p.o
+ obj-$(CONFIG_FB_ARC)              += arcfb.o
+ obj-$(CONFIG_FB_CLPS711X)         += clps711xfb.o
+--- a/drivers/video/cfbimgblt.c
++++ b/drivers/video/cfbimgblt.c
+@@ -44,12 +44,12 @@
+ #endif
+ 
+ static const u32 cfb_tab8[] = {
+-#if defined(__BIG_ENDIAN)
++#if defined(__BIG_ENDIAN) && !defined(CONFIG_COLDFIRE)
+     0x00000000,0x000000ff,0x0000ff00,0x0000ffff,
+     0x00ff0000,0x00ff00ff,0x00ffff00,0x00ffffff,
+     0xff000000,0xff0000ff,0xff00ff00,0xff00ffff,
+     0xffff0000,0xffff00ff,0xffffff00,0xffffffff
+-#elif defined(__LITTLE_ENDIAN)
++#elif defined(__LITTLE_ENDIAN) || defined(CONFIG_COLDFIRE)
+     0x00000000,0xff000000,0x00ff0000,0xffff0000,
+     0x0000ff00,0xff00ff00,0x00ffff00,0xffffff00,
+     0x000000ff,0xff0000ff,0x00ff00ff,0xffff00ff,
+@@ -60,9 +60,9 @@ static const u32 cfb_tab8[] = {
+ };
+ 
+ static const u32 cfb_tab16[] = {
+-#if defined(__BIG_ENDIAN)
++#if defined(__BIG_ENDIAN) && !defined(CONFIG_COLDFIRE)
+     0x00000000, 0x0000ffff, 0xffff0000, 0xffffffff
+-#elif defined(__LITTLE_ENDIAN)
++#elif defined(__LITTLE_ENDIAN) || defined(CONFIG_COLDFIRE)
+     0x00000000, 0xffff0000, 0x0000ffff, 0xffffffff
+ #else
+ #error FIXME: No endianness??
+--- a/drivers/video/console/bitblit.c
++++ b/drivers/video/console/bitblit.c
+@@ -78,7 +78,11 @@ static inline void bit_putcs_aligned(str
+ 				     u32 d_pitch, u32 s_pitch, u32 cellsize,
+ 				     struct fb_image *image, u8 *buf, u8 *dst)
+ {
++#ifndef CONFIG_COLDFIRE
+ 	u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
++#else
++        u32 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
++#endif
+ 	u32 idx = vc->vc_font.width >> 3;
+ 	u8 *src;
+ 
+@@ -111,7 +115,11 @@ static inline void bit_putcs_unaligned(s
+ 				       struct fb_image *image, u8 *buf,
+ 				       u8 *dst)
+ {
++#ifndef CONFIG_COLDFIRE
+ 	u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
++#else
++        u32 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
++#endif
+ 	u32 shift_low = 0, mod = vc->vc_font.width % 8;
+ 	u32 shift_high = 8;
+ 	u32 idx = vc->vc_font.width >> 3;
+@@ -238,7 +246,11 @@ static void bit_cursor(struct vc_data *v
+ {
+ 	struct fb_cursor cursor;
+ 	struct fbcon_ops *ops = info->fbcon_par;
++#ifndef CONFIG_COLDFIRE
+ 	unsigned short charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
++#else
++        unsigned long charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
++#endif
+ 	int w = (vc->vc_font.width + 7) >> 3, c;
+ 	int y = real_y(ops->p, vc->vc_y);
+ 	int attribute, use_sw = (vc->vc_cursor_type & 0x10);
+--- a/drivers/video/console/fbcon.c
++++ b/drivers/video/console/fbcon.c
+@@ -2679,8 +2679,11 @@ static int fbcon_set_palette(struct vc_d
+ {
+ 	struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]];
+ 	int i, j, k, depth;
+-	u8 val;
+-
++#ifndef CONFIG_COLDFIRE
++        u8 val;
++#else
++        u32 val;
++#endif
+ 	if (fbcon_is_inactive(vc, info))
+ 		return -EINVAL;
+ 
+--- /dev/null
++++ b/drivers/video/smifb.c
+@@ -0,0 +1,949 @@
++/***************************************************************************
++        smifb.c  -  Silicon Motion, Inc. LynxEM+ frame buffer device
++                             -------------------
++    begin                : Thu Aug 9 2001
++    copyright            : (C) 2001 by Szu-Tao Huang
++    email                : johuang@siliconmotion.com
++ ***************************************************************************/
++
++/***************************************************************************
++ *                                                                         *
++ *   This program is free software; you can redistribute it and/or modify  *
++ *   it under the terms of the GNU General Public License as published by  *
++ *   the Free Software Foundation; either version 2 of the License, or     *
++ *   (at your option) any later version.                                   *
++ *                                                                         *
++ ***************************************************************************/
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/tty.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <linux/fb.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/pgtable.h>
++#include <asm/system.h>
++#include <asm/uaccess.h>
++
++#include "console/fbcon.h"
++
++/*
++#include <video/fbcon.h>
++#include <video/fbcon-cfb8.h>
++#include <video/fbcon-cfb16.h>
++#include <video/fbcon-cfb24.h>
++*/
++
++#include <linux/fb.h>
++
++static char *SMIRegs;		// point to virtual Memory Map IO starting address
++static char *SMILFB;		// point to virtual video memory starting address
++static struct par_info hw;	// used to record hardware information
++
++#include "smifb.h"
++
++struct ModeInit VGAMode[numVGAModes] =
++{
++	{
++		/*  mode#0: 640 x 480  8Bpp  60Hz */
++		640, 480, 8, 60,
++		/*  Init_MISC */
++		0xE3,
++		{   /*  Init_SR0_SR4 */
++			0x03, 0x01, 0x0F, 0x00, 0x0E,
++		},
++		{   /*  Init_SR10_SR24 */
++			0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
++			0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++			0xC4, 0x30, 0x02, 0x01, 0x01,
++		},
++		{   /*  Init_SR30_SR75 */
++			0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32,
++			0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF,
++			0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
++			0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32,
++			0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA,
++			0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32,
++			0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
++			0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04,
++			0x00, 0x45, 0x30, 0x30, 0x40, 0x30,
++		},
++		{   /*  Init_SR80_SR93 */
++			0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32,
++			0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32,
++			0x00, 0x00, 0x00, 0x00,
++		},
++		{   /*  Init_SRA0_SRAF */
++			0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
++			0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF,
++		},
++		{   /*  Init_GR00_GR08 */
++			0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
++			0xFF,
++		},
++		{   /*  Init_AR00_AR14 */
++			0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
++			0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
++			0x41, 0x00, 0x0F, 0x00, 0x00,
++		},
++		{   /*  Init_CR00_CR18 */
++			0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E,
++			0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++			0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3,
++			0xFF,
++		},
++		{   /*  Init_CR30_CR4D */
++			0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20,
++			0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD,
++			0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00,
++			0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF,
++		},
++		{   /*  Init_CR90_CRA7 */
++			0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55,
++			0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00,
++			0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00,
++		},
++	},
++	{
++		/*  mode#1: 640 x 480  16Bpp  60Hz */
++		640, 480, 16, 60,
++		/*  Init_MISC */
++		0xE3,
++		{   /*  Init_SR0_SR4 */
++			0x03, 0x01, 0x0F, 0x00, 0x0E,
++		},
++		{   /*  Init_SR10_SR24 */
++			0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
++			0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++			0xC4, 0x30, 0x02, 0x01, 0x01,
++		},
++		{   /*  Init_SR30_SR75 */
++			0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32,
++			0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF,
++			0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
++			0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32,
++			0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA,
++			0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32,
++			0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
++			0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04,
++			0x00, 0x45, 0x30, 0x30, 0x40, 0x30,
++		},
++		{   /*  Init_SR80_SR93 */
++			0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32,
++			0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32,
++			0x00, 0x00, 0x00, 0x00,
++		},
++		{   /*  Init_SRA0_SRAF */
++			0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
++			0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF,
++		},
++		{   /*  Init_GR00_GR08 */
++			0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
++			0xFF,
++		},
++		{   /*  Init_AR00_AR14 */
++			0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
++			0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
++			0x41, 0x00, 0x0F, 0x00, 0x00,
++		},
++		{   /*  Init_CR00_CR18 */
++			0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E,
++			0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++			0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3,
++			0xFF,
++		},
++		{   /*  Init_CR30_CR4D */
++			0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20,
++			0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD,
++			0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00,
++			0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF,
++		},
++		{   /*  Init_CR90_CRA7 */
++			0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55,
++			0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00,
++			0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00,
++		},
++	},
++	{
++		/*  mode#2: 640 x 480  24Bpp  60Hz */
++		640, 480, 24, 60,
++		/*  Init_MISC */
++		0xE3,
++		{   /*  Init_SR0_SR4 */
++			0x03, 0x01, 0x0F, 0x00, 0x0E,
++		},
++		{   /*  Init_SR10_SR24 */
++			0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
++			0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++			0xC4, 0x30, 0x02, 0x01, 0x01,
++		},
++		{   /*  Init_SR30_SR75 */
++			0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32,
++			0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF,
++			0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
++			0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32,
++			0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA,
++			0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32,
++			0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
++			0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04,
++			0x00, 0x45, 0x30, 0x30, 0x40, 0x30,
++		},
++		{   /*  Init_SR80_SR93 */
++			0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32,
++			0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32,
++			0x00, 0x00, 0x00, 0x00,
++		},
++		{   /*  Init_SRA0_SRAF */
++			0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
++			0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF,
++		},
++		{   /*  Init_GR00_GR08 */
++			0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
++			0xFF,
++		},
++		{   /*  Init_AR00_AR14 */
++			0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
++			0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
++			0x41, 0x00, 0x0F, 0x00, 0x00,
++		},
++		{   /*  Init_CR00_CR18 */
++			0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E,
++			0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++			0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3,
++			0xFF,
++		},
++		{   /*  Init_CR30_CR4D */
++			0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20,
++			0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD,
++			0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00,
++			0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF,
++		},
++		{   /*  Init_CR90_CRA7 */
++			0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55,
++			0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00,
++			0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00,
++		},
++	},
++	{/*  mode#3: 800 x 600  8Bpp  60Hz */
++		800,600,8,60,
++		0x2B,	/*  Init_MISC */
++		{       /*  Init_SR0_SR4 */
++			0x03, 0x01, 0x0F, 0x03, 0x0E,
++		},
++		{   /*  Init_SR10_SR24 */
++			0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
++			0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
++			0xC4, 0x30, 0x02, 0x01, 0x01,
++ 		},
++		{   /*  Init_SR30_SR75 */
++			0x24, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24,
++			0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF,
++			0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC,
++			0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24,
++			0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58,
++			0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24,
++			0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00,
++			0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13,
++			0x02, 0x45, 0x30, 0x35, 0x40, 0x20,
++		},
++		{   /*  Init_SR80_SR93 */
++			0xFF, 0x87, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24,
++			0x90, 0x01, 0x2C, 0x01, 0xFF, 0x00, 0x24, 0x24,
++			0x00, 0x00, 0x00, 0x00,
++		},
++		{   /*  Init_SRA0_SRAF */
++			0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
++			0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF,
++		},
++		{   /*  Init_GR00_GR08 */
++			0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
++			0xFF,
++		},
++		{   /*  Init_AR00_AR14 */
++			0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
++			0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
++			0x41, 0x00, 0x0F, 0x00, 0x00,
++		},
++		{   /*  Init_CR00_CR18 */
++			0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0,
++			0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++			0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3,
++			0xFF,
++ 		},
++		{   /*  Init_CR30_CR4D */
++			0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20,
++			0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD,
++			0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00,
++			0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57,
++		},
++		{   /*  Init_CR90_CRA7 */
++			0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA,
++			0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00,
++			0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00,
++		},
++	},
++	{/*  mode#4: 800 x 600  16Bpp  60Hz */
++		800, 600, 16, 60,
++		/*  Init_MISC */
++		0x2B,
++		{   /*  Init_SR0_SR4 */
++			0x03, 0x01, 0x0F, 0x03, 0x0E,
++		},
++		{   /*  Init_SR10_SR24 */
++			0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
++			0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
++			0xC4, 0x30, 0x02, 0x01, 0x01,
++		},
++		{   /*  Init_SR30_SR75 */
++			0x24, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24,
++			0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF,
++			0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC,
++			0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24,
++			0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58,
++			0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24,
++			0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00,
++			0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13,
++			0x02, 0x45, 0x30, 0x35, 0x40, 0x20,
++		},
++		{   /*  Init_SR80_SR93 */
++			0x00, 0x00, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24,
++			0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x24, 0x24,
++			0x00, 0x00, 0x00, 0x00,
++		},
++		{   /*  Init_SRA0_SRAF */
++			0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
++			0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF,
++		},
++		{   /*  Init_GR00_GR08 */
++			0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
++			0xFF,
++		},
++		{   /*  Init_AR00_AR14 */
++			0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
++			0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
++			0x41, 0x00, 0x0F, 0x00, 0x00,
++		},
++		{   /*  Init_CR00_CR18 */
++			0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0,
++			0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++			0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3,
++			0xFF,
++ 		},
++		{   /*  Init_CR30_CR4D */
++			0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20,
++			0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD,
++			0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00,
++			0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57,
++		},
++		{   /*  Init_CR90_CRA7 */
++			0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA,
++			0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00,
++			0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00,
++		},
++	},
++		{/*  mode#5: 800 x 600  24Bpp  60Hz */
++		800,600,24,60,
++		0x2B,
++		{   /*  Init_SR0_SR4 */
++			0x03, 0x01, 0x0F, 0x03, 0x0E,
++		},
++		{   /*  Init_SR10_SR24 */
++			0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
++			0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++			0xC4, 0x30, 0x02, 0x01, 0x01,
++		},
++		{   /*  Init_SR30_SR75 */
++			0x36, 0x03, 0x20, 0x09, 0xC0, 0x36, 0x36, 0x36,
++			0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x03, 0xFF,
++			0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
++			0x20, 0x0C, 0x44, 0x20, 0x00, 0x36, 0x36, 0x36,
++			0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58,
++			0x04, 0x55, 0x59, 0x36, 0x36, 0x00, 0x00, 0x36,
++			0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
++			0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13,
++			0x02, 0x45, 0x30, 0x30, 0x40, 0x20,
++		},
++		{   /*  Init_SR80_SR93 */
++			0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x36,
++			0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x36, 0x36,
++			0x00, 0x00, 0x00, 0x00,
++		},
++		{   /*  Init_SRA0_SRAF */
++			0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
++			0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF,
++		},
++		{   /*  Init_GR00_GR08 */
++			0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
++			0xFF,
++		},
++		{   /*  Init_AR00_AR14 */
++			0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
++			0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
++			0x41, 0x00, 0x0F, 0x00, 0x00,
++		},
++		{   /*  Init_CR00_CR18 */
++			0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0,
++			0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++			0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3,
++			0xFF,
++		},
++		{   /*  Init_CR30_CR4D */
++			0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20,
++			0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD,
++			0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00,
++			0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57,
++		},
++		{   /*  Init_CR90_CRA7 */
++			0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA,
++			0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00,
++			0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00,
++		},
++	},
++};
++
++static void smi_set_timing(struct smifb_info *sfb,struct par_info *hw)
++{
++	int i=0,j=0;
++        u32 m_nScreenStride;
++
++
++    for (j=0;j < numVGAModes;j++) {
++		if (VGAMode[j].mmSizeX == hw->width &&
++			VGAMode[j].mmSizeY == hw->height &&
++			VGAMode[j].bpp == sfb->fb.var.bits_per_pixel &&
++			VGAMode[j].hz == hw->hz)
++		{
++			
++			smi_mmiowb(0x0,0x3c6);
++
++			smi_seqw(0,0x1);
++
++			smi_mmiowb(VGAMode[j].Init_MISC,0x3c2);
++
++			for (i=0;i<SIZE_SR00_SR04;i++)	// init SEQ register SR00 - SR04
++			{
++				smi_seqw(i,VGAMode[j].Init_SR00_SR04[i]);
++			}
++
++			for (i=0;i<SIZE_SR10_SR24;i++)	// init SEQ register SR10 - SR24
++			{
++				smi_seqw(i+0x10,VGAMode[j].Init_SR10_SR24[i]);
++			}
++
++			for (i=0;i<SIZE_SR30_SR75;i++)	// init SEQ register SR30 - SR75
++			{
++				if (((i+0x30) != 0x62) && ((i+0x30) != 0x6a) && ((i+0x30) != 0x6b))
++					smi_seqw(i+0x30,VGAMode[j].Init_SR30_SR75[i]);
++			}
++			for (i=0;i<SIZE_SR80_SR93;i++)	// init SEQ register SR80 - SR93
++			{
++				smi_seqw(i+0x80,VGAMode[j].Init_SR80_SR93[i]);
++			}
++			for (i=0;i<SIZE_SRA0_SRAF;i++)	// init SEQ register SRA0 - SRAF
++			{
++				smi_seqw(i+0xa0,VGAMode[j].Init_SRA0_SRAF[i]);
++			}
++
++			for (i=0;i<SIZE_GR00_GR08;i++)	// init Graphic register GR00 - GR08
++			{
++				smi_grphw(i,VGAMode[j].Init_GR00_GR08[i]);
++			}
++
++			for (i=0;i<SIZE_AR00_AR14;i++)	// init Attribute register AR00 - AR14
++			{
++
++				smi_attrw(i,VGAMode[j].Init_AR00_AR14[i]);
++			}
++
++			for (i=0;i<SIZE_CR00_CR18;i++)	// init CRTC register CR00 - CR18
++			{
++				smi_crtcw(i,VGAMode[j].Init_CR00_CR18[i]);
++			}
++
++			for (i=0;i<SIZE_CR30_CR4D;i++)	// init CRTC register CR30 - CR4D
++			{
++				smi_crtcw(i+0x30,VGAMode[j].Init_CR30_CR4D[i]);
++			}
++
++			for (i=0;i<SIZE_CR90_CRA7;i++)	// init CRTC register CR90 - CRA7
++			{
++				smi_crtcw(i+0x90,VGAMode[j].Init_CR90_CRA7[i]);
++			}
++		}
++	}
++	smi_mmiowb(0x67,0x3c2);
++	// set VPR registers
++	writel(0x0,hw->m_pVPR+0x0C);
++	writel(0x0,hw->m_pVPR+0x40);
++	// set data width
++	m_nScreenStride = (hw->width * sfb->fb.var.bits_per_pixel) / 64;
++	switch (sfb->fb.var.bits_per_pixel)
++	{
++		case 8:
++			writel(0x0,hw->m_pVPR+0x0);
++			break;
++		case 16:
++			writel(0x00020000,hw->m_pVPR+0x0);
++			break;
++		case 24:
++			writel(0x00040000,hw->m_pVPR+0x0);
++			break;
++	}
++	writel((u32)(((m_nScreenStride + 2) << 16) | m_nScreenStride),hw->m_pVPR+0x10);
++}
++
++/*
++ * Set the color palette
++ */
++static int
++smifb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
++		   u_int trans, struct fb_info *info)
++{
++	
++	struct smifb_info *sfb = (struct smifbinfo *)info;
++	u32 *pal;
++
++	switch (sfb->fb.fix.visual) {
++	case FB_VISUAL_TRUECOLOR:		/* RGB 5:6:5 True Colour */
++		pal = sfb->fb.pseudo_palette;	// System has 16 default color
++		if (regno >= 16)
++			return 1;
++
++		pal[regno] = (red & 0xf800) |
++		    ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11);
++		break;
++	}
++
++	return 0;
++}
++
++/*
++ *  smifb_decode_var():
++ *    Get the video params out of 'var'. If a value doesn't fit, round it up,
++ *    if it's too big, return -EINVAL.
++ *
++ *    Suggestion: Round up in the following order: bits_per_pixel, xres,
++ *    yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
++ *    bitfields, horizontal timing, vertical timing.
++ */
++static int smifb_decode_var(struct fb_var_screeninfo *var, struct smifb_info *sfb, struct par_info *hw)
++{
++    hw->width = var->xres;
++    hw->height = var->yres;
++    hw->hz = 60;
++
++	return 0;
++}
++
++static int smifb_set_par (struct fb_info *info)
++{
++	struct smifb_info *sfb = (struct smifb_info *)info;
++	int err, chgvar = 0;
++	struct fb_var_screeninfo *var = &info->var;
++	struct fb_cmap *cmap;
++
++
++	/*
++	 * Decode var contents into a par structure, adjusting any
++	 * out of range values.
++	 */
++	err = smifb_decode_var(var, sfb, &hw);
++	if (err) {
++		return err;
++	}
++
++	if (hw.width != var->xres)
++		chgvar = 1;
++	if (hw.height != var->yres)
++		chgvar = 1;
++
++	var->activate		&= ~FB_ACTIVATE_ALL;
++
++	smi_set_timing(sfb, &hw);
++
++	sfb->palette_size = var->bits_per_pixel == 8 ? 256 : 16;
++	cmap = fb_default_cmap(sfb->palette_size);
++	fb_set_cmap(cmap, &sfb->fb);
++
++	return 0;
++}
++
++static int smifb_check_var (struct fb_var_screeninfo *var, struct fb_info *info)
++{
++	var->bits_per_pixel += 7;
++	var->bits_per_pixel &= ~7;
++
++	var->xres_virtual =
++	    var->xres_virtual < var->xres ? var->xres : var->xres_virtual;
++	var->yres_virtual =
++	    var->yres_virtual < var->yres ? var->yres : var->yres_virtual;
++
++	switch (var->bits_per_pixel) {
++	case 8:
++	case 16:		/* RGB 565 */
++    case 24:
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	switch (var->bits_per_pixel) {
++	case 16:
++		var->red.offset	= 11;
++		var->red.length	= 5;
++		var->green.offset	= 5;
++		var->green.length	= 6;
++		var->blue.offset	= 0;
++		var->blue.length	= 5;
++
++		info->fix.visual		= FB_VISUAL_TRUECOLOR;
++		info->fix.line_length= var->xres * 2;
++
++		break;
++	default:
++		return -EINVAL; /* We don't support anything other than 16bpp for now. --NL */
++		break;
++	}
++	return 0;
++
++//	smifb_set_color_bitfields(var);
++
++    return 0;
++}
++
++/*
++ * Formal definition of the VESA spec:
++ *  On
++ *  	This refers to the state of the display when it is in full operation
++ *  Stand-By
++ *  	This defines an optional operating state of minimal power reduction with
++ *  	the shortest recovery time
++ *  Suspend
++ *  	This refers to a level of power management in which substantial power
++ *  	reduction is achieved by the display.  The display can have a longer
++ *  	recovery time from this state than from the Stand-by state
++ *  Off
++ *  	This indicates that the display is consuming the lowest level of power
++ *  	and is non-operational. Recovery from this state may optionally require
++ *  	the user to manually power on the monitor
++ *
++ *  Now, the fbdev driver adds an additional state, (blank), where they
++ *  turn off the video (maybe by colormap tricks), but don't mess with the
++ *  video itself: think of it semantically between on and Stand-By.
++ *
++ *  So here's what we should do in our fbdev blank routine:
++ *
++ *  	VESA_NO_BLANKING (mode 0)	Video on,  front/back light on
++ *  	VESA_VSYNC_SUSPEND (mode 1)  	Video on,  front/back light off
++ *  	VESA_HSYNC_SUSPEND (mode 2)  	Video on,  front/back light off
++ *  	VESA_POWERDOWN (mode 3)		Video off, front/back light off
++ *
++ *  This will match the matrox implementation.
++ */
++/*
++ * smifb_blank():
++ *	Blank the display by setting all palette values to zero.  Note, the
++ * 	12 and 16 bpp modes don't really use the palette, so this will not
++ *      blank the display in all modes.
++ */
++static int smifb_blank(int blank, struct fb_info *info)
++{
++//	struct smifb_info *sfb = (struct smifb_info *)info;
++#if 0
++	switch (blank) {
++	case VESA_POWERDOWN:
++	case VESA_VSYNC_SUSPEND:
++	case VESA_HSYNC_SUSPEND:
++	case VESA_NO_BLANKING:
++	}
++#endif
++	return 1;
++}
++
++static struct fb_ops smifb_ops = {
++	.owner		= THIS_MODULE,
++	.fb_check_var	= smifb_check_var,
++	.fb_set_par 	= smifb_set_par,
++	.fb_setcolreg	= smifb_setcolreg,
++	.fb_blank	= smifb_blank,
++	
++	/* Accelerated functions, using softversions, per se */
++	.fb_fillrect	= cfb_fillrect,
++	.fb_copyarea	= cfb_copyarea,
++	.fb_imageblit	= cfb_imageblit,
++	.fb_cursor	= soft_cursor,
++};
++
++/*
++ * Alloc struct smifb_info and assign the default value
++ */
++static struct smifb_info * __devinit
++smi_alloc_fb_info(struct pci_dev *dev, char *name)
++{
++    struct smifb_info *sfb;
++
++    sfb = kmalloc(sizeof(struct smifb_info) + sizeof(u32) * 16, GFP_KERNEL);
++
++    if (!sfb)
++        return NULL;
++
++    memset(sfb, 0, sizeof(struct smifb_info));
++
++    sfb->currcon        = -1;
++    sfb->dev            = dev;
++
++    strcpy(sfb->fb.fix.id, name);
++
++    sfb->fb.fix.type		= FB_TYPE_PACKED_PIXELS;
++    sfb->fb.fix.type_aux	= 0;
++    sfb->fb.fix.xpanstep	= 0;
++    sfb->fb.fix.ypanstep	= 0;
++    sfb->fb.fix.ywrapstep	= 0;
++    sfb->fb.fix.accel		= FB_ACCEL_NONE;
++
++    sfb->fb.var.nonstd		= 0;
++    sfb->fb.var.activate	= FB_ACTIVATE_NOW;
++    sfb->fb.var.height		= -1;
++    sfb->fb.var.width		= -1;
++    sfb->fb.var.accel_flags	= 0;
++    sfb->fb.var.vmode		= FB_VMODE_NONINTERLACED;
++
++    sfb->fb.fbops		= &smifb_ops;
++    sfb->fb.flags		= FBINFO_FLAG_DEFAULT;
++    sfb->fb.node		= -1;
++    sfb->fb.pseudo_palette	= (void *)(&sfb->palette_size + 1);
++
++    return sfb;
++}
++
++/*
++ * Unmap in the memory mapped IO registers
++ *
++ */
++
++static void __devinit
++smi_unmap_mmio(struct smifb_info *sfb)
++{
++    if (sfb && SMILFB)
++    {
++        iounmap(SMILFB);
++        SMIRegs = NULL;
++    }
++}
++
++/*
++ * Map in the screen memory
++ *
++ */
++static int __devinit
++smi_map_smem(struct smifb_info *sfb, struct pci_dev *dev, u_long smem_len)
++{
++
++    sfb->fb.fix.smem_start = pci_resource_start(dev, 0);
++    sfb->fb.fix.smem_len  = smem_len;
++    printk("%s:smem %x,len %x\n",sfb->fb.fix.smem_start,sfb->fb.fix.smem_len);
++    sfb->fb.screen_base = SMILFB;
++
++    if (!sfb->fb.screen_base)
++    {
++        printk("%s: unable to map screen memory\n",sfb->fb.fix.id);
++        return -ENOMEM;
++    }
++
++    return 0;
++}
++
++
++/*
++ * Unmap in the screen memory
++ *
++ */
++static void __devinit
++smi_unmap_smem(struct smifb_info *sfb)
++{
++    if (sfb && sfb->fb.screen_base)
++    {
++        iounmap(sfb->fb.screen_base);
++        sfb->fb.screen_base = NULL;
++    }
++}
++
++/*
++ * We need to wake up the LynxEM+, and make sure its in linear memory mode.
++ */
++static inline void __devinit
++smi_init_hw(void)
++{
++	/* The delays prevent the ColdFire PCI host from locking up. :/ --NL */
++	udelay(1000);
++    outb(0x18, 0x3c4);
++	udelay(1000);
++    outb(0x11, 0x3c5);
++	udelay(1000);
++	printk("%s: 0x3c4 =%x 0x3c5 %x\n",__FUNCTION__,inw(0x3c4),inw(0x3c5));
++}
++
++static void __devinit
++smi_free_fb_info(struct smifb_info *sfb)
++{
++	if (sfb) {
++		fb_alloc_cmap(&sfb->fb.cmap, 0, 0);
++		kfree(sfb);
++	}
++}
++
++
++u16 SMI_ChipIDs[numChipIDs] = {0x710, 0x712, 0x720};
++
++int __init smifb_init(struct pci_dev *pdev, const struct pci_device_id *ent)
++{
++    struct smifb_info *sfb;
++    u_long smem_size;
++    char name[16];
++    int err;
++	char *m_pLAW;
++	ulong m_pLAWPhysical;
++
++    printk("%s start\n",__FUNCTION__);
++    sprintf(name, "smifb");
++
++    hw.chipID = pdev->device;
++    
++    err = -ENOMEM;
++    sfb = smi_alloc_fb_info(pdev, name);
++    if (!sfb) {
++        goto failed;
++    }
++
++    smi_init_hw();
++
++	// Map address and memory detection
++	m_pLAWPhysical = pci_resource_start(pdev,0);
++	printk("%s:m_pLAWPhysical %x,hw.chipID %x\n",__FUNCTION__,m_pLAWPhysical,hw.chipID);
++	switch (hw.chipID) {
++		case 0x710:
++		case 0x712:
++			sfb->fb.fix.mmio_start = m_pLAWPhysical + 0x00700000;
++			sfb->fb.fix.mmio_len   = 0x00100000;
++
++    		hw.m_pLFB = SMILFB = ioremap(m_pLAWPhysical, 0x00800000);
++		printk("%s:SMILFB%x\n",__FUNCTION__,SMILFB);
++    		hw.m_pMMIO = SMIRegs = SMILFB + 0x00700000;
++			hw.m_pDPR = hw.m_pLFB + 0x00408000;
++			hw.m_pVPR = hw.m_pLFB + 0x0040c000;
++
++    		if (!SMIRegs)
++    		{
++        		printk("%s: unable to map memory mapped IO\n",sfb->fb.fix.id);
++        		return -ENOMEM;
++    		}
++
++			smi_seqw(0x62,0x7A);
++    		smi_seqw(0x6a,0x0c);
++    		smi_seqw(0x6b,0x02);
++    		smem_size = 0x00400000;
++
++    		//LynxEM+ memory dection
++    		*(u32 *)(SMILFB + 4) = 0xAA551133;
++    		if (*(u32 *)(SMILFB + 4) != 0xAA551133)
++    		{
++    			smem_size = 0x00200000;
++        		// Program the MCLK to 130 MHz
++        		smi_seqw(0x6a,0x12);
++        		smi_seqw(0x6b,0x02);
++        		smi_seqw(0x62,0x3e);
++     		}
++			break;
++		case 0x720:
++			sfb->fb.fix.mmio_start = m_pLAWPhysical + 0x000c0000;
++			sfb->fb.fix.mmio_len   = 0x00040000;
++
++			m_pLAW = ioremap(m_pLAWPhysical, 0x00a00000);
++			hw.m_pLFB = SMILFB = m_pLAW + 0x00200000;
++			hw.m_pMMIO = SMIRegs = m_pLAW + 0x000c0000;
++			hw.m_pDPR = m_pLAW;
++			hw.m_pVPR = m_pLAW + 0x800;
++
++			smi_seqw(0x62,0xff);
++			smi_seqw(0x6a,0x0d);
++			smi_seqw(0x6b,0x02);
++			smem_size = 0x00400000;
++
++			break;
++	}
++
++	sfb->fb.var.xres = 640;
++	sfb->fb.var.yres = 480;
++	sfb->fb.var.bits_per_pixel = 16;
++
++   	sfb->fb.var.xres_virtual = sfb->fb.var.xres;
++
++	sfb->fb.var.yres_virtual = sfb->fb.var.yres;
++	
++	sfb->fb.flags = FBINFO_FLAG_DEFAULT;
++
++	printk("%s:smem_size %x\n",__FUNCTION__,smem_size);
++    err = smi_map_smem(sfb, pdev, smem_size);
++	printk("%s:smi_map_smem error %x\n",__FUNCTION__,err);
++    if (err) {
++		goto failed;
++    }
++
++
++
++	fb_set_var(&sfb->fb, &sfb->fb.var);
++	smifb_check_var(&sfb->fb.var, &sfb->fb);
++	smifb_set_par(sfb);
++	printk("%s:register_framebuffer \n",__FUNCTION__);
++	err = register_framebuffer(&sfb->fb);
++	if (err < 0) {
++		goto failed;
++    }
++
++	printk("Silicon Motion, Inc. LynxEM+ Init complete.\n");
++
++	return 0;
++
++failed:
++	smi_unmap_smem(sfb);
++	smi_unmap_mmio(sfb);
++	smi_free_fb_info(sfb);
++	printk("Silicon Motion, Inc. LynxEM+ Init FAILED.n");
++
++	return err;
++}
++
++struct pci_device_id smifb_pci_tbl[] = {
++        { 0x126f, 0x710, PCI_ANY_ID, PCI_ANY_ID },
++        { 0x126f, 0x712, PCI_ANY_ID, PCI_ANY_ID },
++        { 0x126f, 0x720, PCI_ANY_ID, PCI_ANY_ID },
++        { 0 }
++};
++
++MODULE_DEVICE_TABLE(pci, smifb_pci_tbl);
++
++struct pci_driver smifb_driver = {
++        .name =         "smifb",
++        .id_table =     smifb_pci_tbl,
++        .probe =        smifb_init,
++};
++
++int __init smi_init(void)
++{
++	/*return pci_module_init(&smifb_driver);*/
++	return pci_register_driver(&smifb_driver);
++}
++
++module_init(smi_init);
++MODULE_LICENSE("GPL");
++
++
++
+--- /dev/null
++++ b/drivers/video/smifb.h
+@@ -0,0 +1,149 @@
++/***************************************************************************
++			smifb.h  -  SiliconMotion LynxEM+ frame buffer device
++                             -------------------
++    begin                : Thu Aug 9 2001
++    copyright            : (C) 2001 by Szu-Tao Huang
++    email                : johuang@siliconmotion.com
++ ***************************************************************************/
++
++/***************************************************************************
++ *                                                                         *
++ *   This program is free software; you can redistribute it and/or modify  *
++ *   it under the terms of the GNU General Public License as published by  *
++ *   the Free Software Foundation; either version 2 of the License, or     *
++ *   (at your option) any later version.                                   *
++ *                                                                         *
++ ***************************************************************************/
++
++#define smi_mmiowb(dat,reg)	writeb(dat, SMIRegs + reg)
++#define smi_mmioww(dat,reg)	writew(dat, SMIRegs + reg)
++#define smi_mmiowl(dat,reg)	writel(dat, SMIRegs + reg)
++
++#define smi_mmiorb(reg)	        readb(SMIRegs + reg)
++#define smi_mmiorw(reg)	        readw(SMIRegs + reg)
++#define smi_mmiorl(reg)	        readl(SMIRegs + reg)
++
++#define SIZE_SR00_SR04      (0x04 - 0x00 + 1)
++#define SIZE_SR10_SR24      (0x24 - 0x10 + 1)
++#define SIZE_SR30_SR75      (0x75 - 0x30 + 1)
++#define SIZE_SR80_SR93      (0x93 - 0x80 + 1)
++#define SIZE_SRA0_SRAF      (0xAF - 0xA0 + 1)
++#define SIZE_GR00_GR08      (0x08 - 0x00 + 1)
++#define SIZE_AR00_AR14      (0x14 - 0x00 + 1)
++#define SIZE_CR00_CR18      (0x18 - 0x00 + 1)
++#define SIZE_CR30_CR4D      (0x4D - 0x30 + 1)
++#define SIZE_CR90_CRA7      (0xA7 - 0x90 + 1)
++#define SIZE_VPR                        (0x6C + 1)
++#define SIZE_DPR			(0x44 + 1)
++
++#define numVGAModes			6
++#define numChipIDs			3
++
++#define NR_PALETTE	256
++#define NR_RGB          2
++
++/*
++ * Minimum X and Y resolutions
++ */
++#define MIN_XRES	640
++#define MIN_YRES	480
++
++static inline void smi_crtcw(int reg, int val)
++{
++        smi_mmiowb(reg, 0x3d4);
++        smi_mmiowb(val, 0x3d5);
++}
++
++static inline unsigned int smi_crtcr(int reg)
++{
++        smi_mmiowb(reg, 0x3d4);
++        return smi_mmiorb(0x3d5);
++}
++
++static inline void smi_grphw(int reg, int val)
++{
++        smi_mmiowb(reg, 0x3ce);
++        smi_mmiowb(val, 0x3cf);
++}
++
++static inline unsigned int smi_grphr(int reg)
++{
++        smi_mmiowb(reg, 0x3ce);
++        return smi_mmiorb(0x3cf);
++}
++
++static inline void smi_attrw(int reg, int val)
++{
++        smi_mmiorb(0x3da);
++        smi_mmiowb(reg, 0x3c0);
++        smi_mmiorb(0x3c1);
++        smi_mmiowb(val, 0x3c0);
++}
++
++static inline void smi_seqw(int reg, int val)
++{
++        smi_mmiowb(reg, 0x3c4);
++        smi_mmiowb(val, 0x3c5);
++}
++
++static inline unsigned int smi_seqr(int reg)
++{
++        smi_mmiowb(reg, 0x3c4);
++        return smi_mmiorb(0x3c5);
++}
++/*
++* Private structure
++*/
++struct smifb_info {
++        /*
++        * The following is a pointer to be passed into the
++        * functions below.  The modules outside the main
++        * smifb.c driver have no knowledge as to what
++        * is within this structure.
++        */
++        struct fb_info          fb;
++        struct display_switch   *dispsw;
++        struct pci_dev	        *dev;
++        signed int              currcon;
++
++        struct {
++                u8 red, green, blue;
++        } palette[NR_RGB];
++
++        u_int                   palette_size;
++};
++
++struct par_info {
++	/*
++	 * Hardware
++	 */
++	u16		chipID;
++	char	*m_pLFB;
++	char	*m_pMMIO;
++	char	*m_pDPR;
++	char	*m_pVPR;
++
++	u_int	width;
++	u_int	height;
++	u_int	hz;
++};
++
++// The next structure holds all information relevant for a specific video mode.
++struct ModeInit
++{
++	int			  mmSizeX;
++	int			  mmSizeY;
++	int			  bpp;
++	int			  hz;
++	unsigned char Init_MISC;
++	unsigned char Init_SR00_SR04[SIZE_SR00_SR04];
++	unsigned char Init_SR10_SR24[SIZE_SR10_SR24];
++	unsigned char Init_SR30_SR75[SIZE_SR30_SR75];
++	unsigned char Init_SR80_SR93[SIZE_SR80_SR93];
++	unsigned char Init_SRA0_SRAF[SIZE_SRA0_SRAF];
++	unsigned char Init_GR00_GR08[SIZE_GR00_GR08];
++	unsigned char Init_AR00_AR14[SIZE_AR00_AR14];
++	unsigned char Init_CR00_CR18[SIZE_CR00_CR18];
++	unsigned char Init_CR30_CR4D[SIZE_CR30_CR4D];
++	unsigned char Init_CR90_CRA7[SIZE_CR90_CRA7];
++};
+--- a/include/linux/fb.h
++++ b/include/linux/fb.h
+@@ -873,6 +873,17 @@ struct fb_info {
+ #define fb_writeq sbus_writeq
+ #define fb_memset sbus_memset_io
+ 
++#elif defined(CONFIG_COLDFIRE)
++#define fb_readb readb
++#define fb_readw readw
++#define fb_readl readl
++#define fb_readq readq
++#define fb_writeb writeb
++#define fb_writew writew
++#define fb_writel writel
++#define fb_writeq writeq
++#define fb_memset memset_io
++
+ #elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__) || defined(__avr32__)
+ 
+ #define fb_readb __raw_readb
+@@ -899,7 +910,7 @@ struct fb_info {
+ 
+ #endif
+ 
+-#if defined (__BIG_ENDIAN)
++#if defined (__BIG_ENDIAN) && !defined(CONFIG_COLDFIRE)
+ #define FB_LEFT_POS(bpp)          (32 - bpp)
+ #define FB_SHIFT_HIGH(val, bits)  ((val) >> (bits))
+ #define FB_SHIFT_LOW(val, bits)   ((val) << (bits))
diff --git a/target/linux/coldfire/patches/080-mcfv4e_dspi_update.patch b/target/linux/coldfire/patches/080-mcfv4e_dspi_update.patch
new file mode 100644
index 0000000000..a157616732
--- /dev/null
+++ b/target/linux/coldfire/patches/080-mcfv4e_dspi_update.patch
@@ -0,0 +1,1378 @@
+From 771f4741de2cd8a103d96cd1e8281926448ff56d Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 15 Jul 2008 11:44:08 -0600
+Subject: [PATCH] Fix DSPI driver.
+
+Update to latest Matt Coldfire driver.  Fix timing issues with
+M547x/M548x END-OF-QUEUE notification.
+
+LTIBName: mcfv4e-dspi-update
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/m547x_8x-devices.c |   35 +-
+ drivers/spi/Kconfig                   |    6 +
+ drivers/spi/Makefile                  |    2 +-
+ drivers/spi/dspi_mcf.c                | 1217 +++++++++++++++++++++++++++++++++
+ include/asm-m68k/mcfdspi.h            |   48 ++
+ 5 files changed, 1296 insertions(+), 12 deletions(-)
+ create mode 100644 drivers/spi/dspi_mcf.c
+ create mode 100644 include/asm-m68k/mcfdspi.h
+
+--- a/arch/m68k/coldfire/m547x_8x-devices.c
++++ b/arch/m68k/coldfire/m547x_8x-devices.c
+@@ -26,26 +26,40 @@
+  */
+ 
+ /* number of supported SPI selects */
+-#define SPI_NUM_CHIPSELECTS	4
++#define SPI_NUM_CHIPSELECTS	8
+ 
+ void coldfire_spi_cs_control(u8 cs, u8 command)
+ {
+ 	/* nothing special required */
+ }
+ 
++#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
++static struct coldfire_spi_chip spidev_chip_info = {
++	.bits_per_word = 8,
++};
++#endif
++
+ static struct spi_board_info spi_board_info[] = {
+-	/* no board info */
++#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
++	{
++		.modalias = "spidev",
++		.max_speed_hz = 16000000,  	/* max clk (SCK) speed in HZ */
++		.bus_num = 1,
++		.chip_select = 0,		/* CS0 */
++		.controller_data = &spidev_chip_info,
++ 	}
++#endif
+ };
+ 
+ static int spi_irq_list[] = {
+-	/* IRQ, ICR Offset, ICR Val, Mask */
+-	64 + ISC_DSPI_OVRFW, 0, 0, 0,
+-	64 + ISC_DSPI_RFOF,  0, 0, 0,
+-	64 + ISC_DSPI_RFDF,  0, 0, 0,
+-	64 + ISC_DSPI_TFUF,  0, 0, 0,
+-	64 + ISC_DSPI_TCF,   0, 0, 0,
+-	64 + ISC_DSPI_TFFF,  0, 0, 0,
+-	64 + ISC_DSPI_EOQF,  0, 0, 0,
++	/* IRQ, 	     ICR Offset, 	ICR Val,Mask */
++	64 + ISC_DSPI_OVRFW, ISC_DSPI_OVRFW,	0x18, 	0,
++	64 + ISC_DSPI_RFOF,  ISC_DSPI_RFOF,	0x18, 	0,
++	64 + ISC_DSPI_RFDF,  ISC_DSPI_RFDF,	0x18, 	0,
++	64 + ISC_DSPI_TFUF,  ISC_DSPI_TFUF,	0x18, 	0,
++	64 + ISC_DSPI_TCF,   ISC_DSPI_TCF,	0x18, 	0,
++	64 + ISC_DSPI_TFFF,  ISC_DSPI_TFFF,	0x18, 	0,
++	64 + ISC_DSPI_EOQF,  ISC_DSPI_EOQF,	0x18, 	0,
+ 	0,0,0,0,
+ };
+ 
+@@ -120,7 +134,6 @@ static int __init m547x_8x_spi_init(void
+ 	/* register device */
+ 	retval = platform_device_register(&coldfire_spi);
+ 	if (retval < 0) {
+-		printk(KERN_ERR "SPI-m547x_8x: platform_device_register failed with code=%d\n", retval);
+ 		goto out;
+ 	}
+ 
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -130,6 +130,12 @@ config SPI_COLDFIRE
+ 	  Tested with the 5282 processor, but should also work with other
+ 	  Coldfire variants.
+ 
++config SPI_DSPI
++	tristate "Coldfire DSPI"
++	depends on SPI_MASTER && COLDFIRE
++	help
++	  SPI driver for Coldfire DSPI driver only.
++
+ config SPI_COLDFIRE_DSPI_EDMA	  
+ 	boolean "Coldfire DSPI master driver uses eDMA"
+ 	depends on SPI_MASTER && COLDFIRE && SPI_COLDFIRE && EXPERIMENTAL && COLDFIRE_EDMA
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -19,7 +19,7 @@ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitban
+ obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
+ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
+ # obj-$(CONFIG_SPI_COLDFIRE)		+= spi_coldfire.o spi-m5445x.o
+-obj-$(CONFIG_SPI_COLDFIRE)		+= spi_coldfire.o
++obj-$(CONFIG_SPI_DSPI)			+= dspi_mcf.o
+ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
+ obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
+--- /dev/null
++++ b/drivers/spi/dspi_mcf.c
+@@ -0,0 +1,1217 @@
++/*
++ * dspi_mcf.c - DSPI controller for ColdFire processors
++ *
++ *
++ *      Matt Waddel Matt.Waddel@freescale.com
++ *      Copyright Freescale Semiconductor, Inc. 2008
++ *
++ * 	M547x/M548x changes by Kurt Mahan kmahan@freescale.com
++ *      Copyright Freescale Semiconductor, Inc. 2008
++ *
++ *      Based on spi_coldfire.c done by:
++ *              Andrey Butok
++ *              Yaroslav Vinogradov
++ *              Copyright Freescale Semiconductor, Inc. 2006-2007
++ *              Mike Lavender (mike@steroidmicros)
++ *              (C) Copyright 2005, Intec Automation,
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ ***************************************************************************
++ * Changes:
++ *   v0.002	M547x/M548x support.
++ *   v0.001	Initial version. Coldfire DSPI master driver.
++ ****************************************************************************/
++
++/*
++ * Includes
++ */
++
++#include <linux/autoconf.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/workqueue.h>
++#include <linux/delay.h>
++#include <asm/mcfsim.h>
++#include <asm/mcfqspi.h>
++#include <asm/coldfire.h>
++#include <linux/io.h>
++#include <asm/mcfdspi.h>
++#include <linux/dma-mapping.h>
++
++#undef DSPI_COLDFIRE_DEBUG
++
++#ifdef DSPI_COLDFIRE_DEBUG
++#define DBG(fmt, args...) \
++	printk(KERN_INFO "[%s]  " fmt , __FUNCTION__, ## args)
++#else
++#define DBG(fmt, args...)	do {} while (0)
++#endif
++
++#if defined(CONFIG_M54455)
++#include <asm/mcf5445x_dspi.h>
++#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
++	#include <asm/mcf5445x_edma.h>
++#endif
++#endif
++
++#if defined(CONFIG_M547X_8X)
++#include <asm/virtconvert.h>
++#include <asm/m5485dspi.h>
++#endif
++
++#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
++#include <asm/mcf_edma.h>
++#define SPI_DSPI_EDMA
++#define EDMA_BUFSIZE_KMALLOC	(DSPI_FIFO_SIZE*4)
++#define DSPI_DMA_RX_TCD		MCF_EDMA_CHAN_DSPI_RX
++#define DSPI_DMA_TX_TCD 	MCF_EDMA_CHAN_DSPI_TX
++#endif
++
++#define DSPI_BITS	MCF_DSPI_DCTAR_FMSZ(0xF)
++#define DSPI_BITS_16	MCF_DSPI_DCTAR_FMSZ(0xF)
++#define DSPI_BITS_8	MCF_DSPI_DCTAR_FMSZ(0x7)
++#define DSPI_FIFO_SIZE	16
++
++#define DRIVER_NAME "Coldfire DSPI"
++
++/****************************************************************************/
++
++/*
++ * Local constants and macros
++ */
++
++#define START_STATE ((void *)0)
++#define RUNNING_STATE ((void *)1)
++#define DONE_STATE ((void *)2)
++#define ERROR_STATE ((void *)-1)
++
++#define QUEUE_RUNNING 0
++#define QUEUE_STOPPED 1
++
++/****************************************************************************/
++
++/*
++ * Local Data Structures
++ */
++
++struct DSPI_MCR {
++	unsigned master:1;
++	unsigned cont_scke:1;
++	unsigned dconf:2;
++	unsigned frz:1;
++	unsigned mtfe:1;
++	unsigned pcsse:1;
++	unsigned rooe:1;
++	unsigned pcsis:8;
++	unsigned reserved15:1;
++	unsigned mdis:1;
++	unsigned dis_tx:1;
++	unsigned dis_rxf:1;
++	unsigned clr_tx:1;
++	unsigned clr_rxf:1;
++	unsigned smpl_pt:2;
++	unsigned reserved71:7;
++	unsigned halt:1;
++};
++
++struct DSPI_CTAR {
++	unsigned dbr:1;
++	unsigned fmsz:4;
++	unsigned cpol:1;
++	unsigned cpha:1;
++	unsigned lsbfe:1;
++	unsigned pcssck:2;
++	unsigned pasc:2;
++	unsigned pdt:2;
++	unsigned pbr:2;
++	unsigned cssck:4;
++	unsigned asc:4;
++	unsigned dt:4;
++	unsigned br:4;
++};
++
++struct chip_data {
++	/* dspi data */
++	union {
++		u32 mcr_val;
++		struct DSPI_MCR mcr;
++	};
++	union {
++		u32 ctar_val;
++		struct DSPI_CTAR ctar;
++	};
++	u16 void_write_data;
++};
++
++
++struct driver_data {
++	/* Driver model hookup */
++	struct platform_device *pdev;
++
++	/* SPI framework hookup */
++	struct spi_master *master;
++
++	/* Driver message queue */
++	struct workqueue_struct	*workqueue;
++	struct work_struct pump_messages;
++	spinlock_t lock; /* lock */
++	struct list_head queue;
++	int busy;
++	int run;
++
++	/* Message Transfer pump */
++	struct tasklet_struct pump_transfers;
++
++	/* Current message transfer state info */
++	struct spi_message *cur_msg;
++	struct spi_transfer *cur_transfer;
++	struct chip_data *cur_chip;
++	size_t len;
++	void *tx;
++	void *tx_end;
++	void *rx;
++	void *rx_end;
++	char flags;
++#define TRAN_STATE_RX_VOID	   0x01
++#define TRAN_STATE_TX_VOID 	   0x02
++#define TRAN_STATE_WORD_ODD_NUM	   0x04
++	u8 cs;
++	u16 void_write_data;
++	unsigned cs_change:1;
++
++	u32 trans_cnt;
++	u32 wce_cnt;
++	u32 abrt_cnt;
++	u32 *mcr;		/* DSPI MCR register */
++	u32 *ctar;		/* DSPI CTAR register */
++	u32 *dspi_dtfr;		/* DSPI DTFR register */
++	u32 *dspi_drfr;		/* DSPI DRFR register */
++	u32 *dspi_rser;		/* DSPI RSER register */
++	u32 *dspi_sr;		/* DSPI status register */
++
++#if defined(SPI_DSPI_EDMA)
++	void *edma_tx_buf;
++	void *edma_rx_buf;
++#endif
++
++#if defined(CONFIG_M532x) || defined(CONFIG_M537x)
++	u16 *par;	   /* Pin assignment register */
++#else
++	u8  *par;	   /* Pin assignment register */
++#endif
++	u8  *int_icr;	   /* Interrupt level and priority register */
++	u32 *int_mr;       /* Interrupt mask register */
++	void (*cs_control)(u8 cs, u8 command);
++};
++
++#define DSPI_CS(cs) ((1<<(cs))<<16)
++
++/****************************************************************************/
++
++/*
++ * SPI local functions
++ */
++
++static void *next_transfer(struct driver_data *drv_data)
++{
++	struct spi_message *msg = drv_data->cur_msg;
++	struct spi_transfer *trans = drv_data->cur_transfer;
++
++	DBG("\n");
++	/* Move to next transfer */
++	if (trans->transfer_list.next != &msg->transfers) {
++		drv_data->cur_transfer = list_entry(trans->transfer_list.next,
++						    struct spi_transfer,
++						    transfer_list);
++
++		if (drv_data->cur_transfer->transfer_list.next
++			== &msg->transfers) /* last transfer */
++			drv_data->cur_transfer->cs_change = 1;
++
++		return RUNNING_STATE;
++	} else
++		return DONE_STATE;
++}
++
++
++static inline int is_word_transfer(struct driver_data *drv_data)
++{
++	return ((*(drv_data->ctar+drv_data->cs) & DSPI_BITS_16) ==
++						  DSPI_BITS_8) ? 0 : 1;
++}
++
++static inline void set_8bit_transfer_mode(struct driver_data *drv_data)
++{
++	DBG("\n");
++	*(drv_data->ctar+drv_data->cs) =
++		(*(drv_data->ctar + drv_data->cs) & ~DSPI_BITS) | DSPI_BITS_8;
++}
++
++static inline void set_16bit_transfer_mode(struct driver_data *drv_data)
++{
++	DBG("\n");
++	*(drv_data->ctar+drv_data->cs) =
++		(*(drv_data->ctar + drv_data->cs) & ~DSPI_BITS) | DSPI_BITS_16;
++}
++
++static unsigned char hz_to_spi_baud(int pbr, int dbr, int speed_hz)
++{
++	int pbr_tbl[4] = {2, 3, 5, 7}; /* Valid baud rate pre-scaler values */
++	int brs[16] = {	2,	4,	6,	8,
++			16,	32,	64,	128,
++			256,	512,	1024,	2048,
++			4096,	8192,	16384,	32768 };
++	int temp, index = 0;
++
++	if ((pbr < 0) || (pbr > 3) ||
++	    (dbr < 0) || (dbr > 1))
++		return 15; /* table indexes out of range, go slow */
++
++	temp = ((((MCF_CLK / 2) / pbr_tbl[pbr]) * (1 + dbr)) / speed_hz);
++
++	while (temp >= brs[index])
++		if (index++ >= 15)
++			break;
++
++	DBG("baud rate scaler = 0x%x - %d\n", index, brs[index]);
++	return(index);
++}
++
++static int write(struct driver_data *drv_data)
++{
++	int tx_count = 0;
++	int tx_word = is_word_transfer(drv_data);
++	u16 d16;
++	u8  d8;
++	u32 dspi_pushr = 0;
++	int first = 1;
++#if defined(SPI_DSPI_EDMA)
++	u32 *edma_wr = (u32 *)(drv_data->edma_tx_buf);
++#endif
++
++	/* If we are in word mode, but only have a single byte to transfer
++	 * then switch to byte mode temporarily.  Will switch back at the
++	 * end of the transfer. */
++	if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1)) {
++		drv_data->flags |= TRAN_STATE_WORD_ODD_NUM;
++		set_8bit_transfer_mode(drv_data);
++		tx_word = 0;
++	}
++
++	while ((drv_data->tx < drv_data->tx_end) && (tx_count < DSPI_FIFO_SIZE)) {
++// DBG("while\n");
++		if (tx_word) {
++			if ((drv_data->tx_end - drv_data->tx) == 1)
++				break;
++
++			if (!(drv_data->flags & TRAN_STATE_TX_VOID))
++				d16 = *(u16 *)drv_data->tx;
++			else
++				d16 = drv_data->void_write_data;
++
++			dspi_pushr = MCF_DSPI_DTFR_TXDATA(d16) |
++				     DSPI_CS(drv_data->cs) |
++				     MCF_DSPI_DTFR_CTAS(drv_data->cs) |
++				     MCF_DSPI_DTFR_CONT;
++
++			drv_data->tx += 2;
++		} else {
++			if (!(drv_data->flags & TRAN_STATE_TX_VOID))
++				d8 = *(u8 *)drv_data->tx;
++			else
++				d8 = *(u8 *)&drv_data->void_write_data;
++
++			dspi_pushr = MCF_DSPI_DTFR_TXDATA(d8) |
++				     DSPI_CS(drv_data->cs) |
++				     MCF_DSPI_DTFR_CTAS(drv_data->cs) |
++				     MCF_DSPI_DTFR_CONT;
++
++			drv_data->tx++;
++		}
++
++		if (drv_data->tx == drv_data->tx_end
++			|| tx_count == DSPI_FIFO_SIZE-1) {
++			/* last transfer in the queue */
++			dspi_pushr |= MCF_DSPI_DTFR_EOQ;
++			if ((drv_data->cs_change)
++			 && (drv_data->tx == drv_data->tx_end))
++				dspi_pushr &= ~MCF_DSPI_DTFR_CONT;
++#ifdef CONFIG_M547X_8X
++			/* EOQ gets missed if we don't delay */
++			udelay(100);
++#endif
++		} else if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1))
++			dspi_pushr |= MCF_DSPI_DTFR_EOQ;
++
++		if (first) {
++			first = 0;
++			dspi_pushr |= MCF_DSPI_DTFR_CTCNT; /* clear counter */
++		}
++#if defined(SPI_DSPI_EDMA)
++		*edma_wr = dspi_pushr;
++		edma_wr++;
++#else
++		*drv_data->dspi_dtfr = dspi_pushr;
++#endif
++		tx_count++;
++	}
++
++#if defined(SPI_DSPI_EDMA)
++	if (tx_count > 0) {
++
++		mcf_edma_set_tcd_params(DSPI_DMA_TX_TCD,
++			virt_to_phys(drv_data->edma_tx_buf),
++			(u32)drv_data->dspi_dtfr,
++			MCF_EDMA_TCD_ATTR_SSIZE_32BIT
++			| MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
++			4,		/* soff */
++			4 * tx_count,	/* nbytes */
++			0,		/* slast */
++			1,		/* citer */
++			1,		/* biter */
++			0,		/* doff */
++			0,		/* dlastsga */
++			0,		/* major_int */
++			1);		/* disable_req */
++
++		mcf_edma_set_tcd_params(DSPI_DMA_RX_TCD,
++			(u32)drv_data->dspi_drfr,
++			virt_to_phys(drv_data->edma_rx_buf),
++			MCF_EDMA_TCD_ATTR_SSIZE_32BIT
++			| MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
++			0,		/* soff */
++			4 * tx_count,	/* nbytes */
++			0,		/* slast */
++			1,		/* citer */
++			1,		/* biter */
++			4,		/* doff */
++			0,		/* dlastsga */
++			0,		/* major_int */
++			1);		/* disable_req */
++
++		mcf_edma_start_transfer(DSPI_DMA_TX_TCD);
++	}
++#endif
++	return (tx_count * (tx_word + 1));
++}
++
++static int read(struct driver_data *drv_data)
++{
++	int rx_count = 0;
++	int rx_word = is_word_transfer(drv_data);
++	u16 d;
++#if defined(SPI_DSPI_EDMA)
++	u32 *rx_edma = (u32 *) drv_data->edma_rx_buf;
++
++	/* receive SPI data */
++	mcf_edma_start_transfer(DSPI_DMA_RX_TCD);
++#endif
++	while ((drv_data->rx < drv_data->rx_end)
++		&& (rx_count < DSPI_FIFO_SIZE)) {
++
++		if (rx_word) {
++			if ((drv_data->rx_end - drv_data->rx) == 1)
++				break;
++#if defined(SPI_DSPI_EDMA)
++			d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
++			rx_edma++;
++#else
++			d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr);
++#endif
++			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
++				*(u16 *)drv_data->rx = d;
++			drv_data->rx += 2;
++
++		} else {
++#if defined(SPI_DSPI_EDMA)
++			d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
++			rx_edma++;
++#else
++			d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr);
++#endif
++			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
++				*(u8 *)drv_data->rx = d;
++			drv_data->rx++;
++		}
++		rx_count++;
++		DBG("rxd=0x%x\n", d);
++	}
++	return rx_count;
++}
++
++
++static inline void dspi_setup_chip(struct driver_data *drv_data)
++{
++	struct chip_data *chip = drv_data->cur_chip;
++
++	DBG("\n");
++	*drv_data->mcr = chip->mcr_val;
++	*(drv_data->ctar+drv_data->cs) = chip->ctar_val;
++	*drv_data->dspi_rser =  MCF_DSPI_DRSER_EOQFE;
++}
++
++#if defined(SPI_DSPI_EDMA)
++static int edma_tx_handler(int channel, void *dev)
++{
++	DBG("\n");
++	if (channel == DSPI_DMA_TX_TCD)
++		mcf_edma_stop_transfer(DSPI_DMA_TX_TCD);
++	return IRQ_HANDLED;
++}
++
++static int edma_rx_handler(int channel, void *dev)
++{
++	DBG("\n");
++	if (channel == DSPI_DMA_RX_TCD)
++		mcf_edma_stop_transfer(DSPI_DMA_RX_TCD);
++	return IRQ_HANDLED;
++}
++#endif
++
++static irqreturn_t dspi_interrupt(int irq, void *dev_id)
++{
++	struct driver_data *drv_data = (struct driver_data *)dev_id;
++	struct spi_message *msg = drv_data->cur_msg;
++
++	/* Clear all flags immediately */
++	*drv_data->dspi_sr = MCF_DSPI_DSR_EOQF;
++
++	if (!drv_data->cur_msg || !drv_data->cur_msg->state) {
++#if !defined(SPI_DSPI_EDMA)
++		u32 irq_status = *drv_data->dspi_sr;
++		/* if eDMA is used it happens some time (at least once)*/
++		printk(KERN_ERR "Bad message or transfer state handler. \
++				 IRQ status = %x\n", irq_status);
++#endif
++		return IRQ_NONE;
++	}
++
++	DBG("\n");
++	/*
++	 * Read the data into the buffer and reload and start
++	 * queue with new data if not finished.  If finished
++	 * then setup the next transfer
++	 */
++	read(drv_data);
++
++	if (drv_data->rx == drv_data->rx_end) {
++		/*
++		 * Finished now - fall through and schedule next
++		 * transfer tasklet
++		 */
++		if (drv_data->flags & TRAN_STATE_WORD_ODD_NUM)
++			set_16bit_transfer_mode(drv_data);
++
++		msg->state = next_transfer(drv_data);
++	} else {
++		/* not finished yet - keep going */
++		msg->actual_length += write(drv_data);
++		return IRQ_HANDLED;
++	}
++
++	tasklet_schedule(&drv_data->pump_transfers);
++
++	return IRQ_HANDLED;
++}
++
++/* caller already set message->status; dma and pio irqs are blocked */
++static void giveback(struct driver_data *drv_data)
++{
++	struct spi_transfer *last_transfer;
++	unsigned long flags;
++	struct spi_message *msg;
++	DBG("\n");
++
++	spin_lock_irqsave(&drv_data->lock, flags);
++	msg = drv_data->cur_msg;
++	drv_data->cur_msg = NULL;
++	drv_data->cur_transfer = NULL;
++	drv_data->cur_chip = NULL;
++	queue_work(drv_data->workqueue, &drv_data->pump_messages);
++	spin_unlock_irqrestore(&drv_data->lock, flags);
++
++	last_transfer = list_entry(msg->transfers.prev,
++				   struct spi_transfer,	transfer_list);
++
++	if (!last_transfer->cs_change)
++		drv_data->cs_control(drv_data->cs, QSPI_CS_DROP);
++
++	msg->state = NULL;
++	if (msg->complete)
++		msg->complete(msg->context);
++}
++
++
++static void pump_transfers(unsigned long data)
++{
++	struct driver_data *drv_data = (struct driver_data *)data;
++	struct spi_message *message = NULL;
++	struct spi_transfer *transfer = NULL;
++	struct spi_transfer *previous = NULL;
++	struct chip_data *chip = NULL;
++	unsigned long flags;
++	DBG("\n");
++	/* Get current state information */
++	message = drv_data->cur_msg;
++	transfer = drv_data->cur_transfer;
++	chip = drv_data->cur_chip;
++
++	/* Handle for abort */
++	if (message->state == ERROR_STATE) {
++		message->status = -EIO;
++		giveback(drv_data);
++		return;
++	}
++
++	/* Handle end of message */
++	if (message->state == DONE_STATE) {
++		message->status = 0;
++		giveback(drv_data);
++		return;
++	}
++
++	if (message->state == START_STATE) {
++		dspi_setup_chip(drv_data);
++
++		if (drv_data->cs_control)
++			drv_data->cs_control(message->spi->chip_select,
++				QSPI_CS_ASSERT);
++	}
++
++	/* Delay if requested at end of transfer*/
++	if (message->state == RUNNING_STATE) {
++		previous = list_entry(transfer->transfer_list.prev,
++					struct spi_transfer,
++					transfer_list);
++
++		if (drv_data->cs_control && transfer->cs_change)
++			drv_data->cs_control(message->spi->chip_select,
++				QSPI_CS_DROP);
++
++		if (previous->delay_usecs)
++			udelay(previous->delay_usecs);
++
++		if (drv_data->cs_control && transfer->cs_change)
++			drv_data->cs_control(message->spi->chip_select,
++				QSPI_CS_ASSERT);
++	}
++
++	drv_data->flags = 0;
++	drv_data->tx = (void *)transfer->tx_buf;
++	drv_data->tx_end = drv_data->tx + transfer->len;
++	drv_data->rx = transfer->rx_buf;
++	drv_data->rx_end = drv_data->rx + transfer->len;
++
++	if (!drv_data->rx)
++		drv_data->flags |= TRAN_STATE_RX_VOID;
++	if (!drv_data->tx)
++		drv_data->flags |= TRAN_STATE_TX_VOID;
++	drv_data->cs = message->spi->chip_select;
++	drv_data->cs_change = transfer->cs_change;
++	drv_data->void_write_data = chip->void_write_data;
++	if (transfer->speed_hz) {
++		*(drv_data->ctar + drv_data->cs) = \
++			((chip->ctar_val & ~0xF) | \
++			  hz_to_spi_baud(chip->ctar.pbr, \
++					 chip->ctar.dbr, \
++					 transfer->speed_hz));
++	}
++
++	message->state = RUNNING_STATE;
++	/* Go baby, go */
++	local_irq_save(flags);
++	message->actual_length += write(drv_data);
++	local_irq_restore(flags);
++}
++
++
++static void pump_messages(struct work_struct *work)
++{
++	struct driver_data *drv_data;
++	unsigned long flags;
++	DBG("\n");
++
++	drv_data = container_of(work, struct driver_data, pump_messages);
++
++	/* Lock queue and check for queue work */
++	spin_lock_irqsave(&drv_data->lock, flags);
++	if (list_empty(&drv_data->queue)
++		|| drv_data->run == QUEUE_STOPPED) {
++		drv_data->busy = 0;
++		spin_unlock_irqrestore(&drv_data->lock, flags);
++		return;
++	}
++
++	/* Make sure we are not already running a message */
++	if (drv_data->cur_msg) {
++		spin_unlock_irqrestore(&drv_data->lock, flags);
++		return;
++	}
++
++	/* Extract head of queue */
++	drv_data->cur_msg = list_entry(drv_data->queue.next,
++					struct spi_message, queue);
++	list_del_init(&drv_data->cur_msg->queue);
++
++	/* Initial message state*/
++	drv_data->cur_msg->state = START_STATE;
++	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
++						struct spi_transfer,
++						transfer_list);
++
++	if (drv_data->cur_transfer->transfer_list.next
++		== &drv_data->cur_msg->transfers)
++		drv_data->cur_transfer->cs_change = 1; /* last */
++
++
++	/* Setup the SPI Registers using the per chip configuration */
++	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
++
++	/* Mark as busy and launch transfers */
++	tasklet_schedule(&drv_data->pump_transfers);
++
++	drv_data->busy = 1;
++	spin_unlock_irqrestore(&drv_data->lock, flags);
++}
++
++/****************************************************************************/
++
++/*
++ * SPI master implementation
++ */
++
++static int transfer(struct spi_device *spi, struct spi_message *msg)
++{
++	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
++	unsigned long flags;
++
++	DBG("\n");
++	spin_lock_irqsave(&drv_data->lock, flags);
++
++	if (drv_data->run == QUEUE_STOPPED) {
++		spin_unlock_irqrestore(&drv_data->lock, flags);
++		return -ESHUTDOWN;
++	}
++
++	msg->actual_length = 0;
++	msg->status = -EINPROGRESS;
++	msg->state = START_STATE;
++
++	list_add_tail(&msg->queue, &drv_data->queue);
++
++	if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
++		queue_work(drv_data->workqueue, &drv_data->pump_messages);
++
++	spin_unlock_irqrestore(&drv_data->lock, flags);
++
++	return 0;
++}
++
++
++static int setup(struct spi_device *spi)
++{
++
++	struct chip_data *chip;
++	struct coldfire_dspi_chip *chip_info
++		= (struct coldfire_dspi_chip *)spi->controller_data;
++	DBG("\n");
++
++	/* Only alloc on first setup */
++	chip = spi_get_ctldata(spi);
++	if (chip == NULL) {
++		chip = kcalloc(1, sizeof(struct chip_data), GFP_KERNEL);
++		if (!chip)
++			return -ENOMEM;
++		spi->mode = chip_info->mode;
++		spi->bits_per_word = chip_info->bits_per_word;
++	}
++
++	chip->mcr.master = 1;
++	chip->mcr.cont_scke = 0;
++	chip->mcr.dconf = 0;
++	chip->mcr.frz = 0;
++	chip->mcr.mtfe = 0;
++	chip->mcr.pcsse = 0;
++	chip->mcr.rooe = 0;
++	chip->mcr.pcsis = 0xFF;
++	chip->mcr.reserved15 = 0;
++	chip->mcr.mdis = 0;
++	chip->mcr.dis_tx = 0;
++	chip->mcr.dis_rxf = 0;
++	chip->mcr.clr_tx = 1;
++	chip->mcr.clr_rxf = 1;
++	chip->mcr.smpl_pt = 0;
++	chip->mcr.reserved71 = 0;
++	chip->mcr.halt = 0;
++
++	if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) {
++		chip->ctar.fmsz = spi->bits_per_word-1;
++	} else {
++		printk(KERN_ERR "Invalid wordsize\n");
++		kfree(chip);
++		return -ENODEV;
++	}
++
++	chip->void_write_data = chip_info->void_write_data;
++
++	if (spi->max_speed_hz != 0)
++		chip_info->br = hz_to_spi_baud(chip_info->pbr, chip_info->dbr, \
++					       spi->max_speed_hz);
++
++	chip->ctar.cpha = (spi->mode & SPI_CPHA) ? 1 : 0;
++	chip->ctar.cpol = (spi->mode & SPI_CPOL) ? 1 : 0;
++	chip->ctar.lsbfe = (spi->mode & SPI_LSB_FIRST) ? 1 : 0;
++	chip->ctar.dbr = chip_info->dbr;
++	chip->ctar.pbr = chip_info->pbr;
++	chip->ctar.br = chip_info->br;
++	chip->ctar.pcssck = chip_info->pcssck;
++	chip->ctar.pasc = chip_info->pasc;
++	chip->ctar.pdt = chip_info->pdt;
++	chip->ctar.cssck = chip_info->cssck;
++	chip->ctar.asc = chip_info->asc;
++	chip->ctar.dt = chip_info->dt;
++
++	spi_set_ctldata(spi, chip);
++
++	return 0;
++}
++
++static int init_queue(struct driver_data *drv_data)
++{
++	INIT_LIST_HEAD(&drv_data->queue);
++	spin_lock_init(&drv_data->lock);
++
++	drv_data->run = QUEUE_STOPPED;
++	drv_data->busy = 0;
++
++	tasklet_init(&drv_data->pump_transfers,
++			pump_transfers,	(unsigned long)drv_data);
++
++	INIT_WORK(&drv_data->pump_messages, pump_messages);
++
++	drv_data->workqueue = create_singlethread_workqueue(
++					drv_data->master->dev.parent->bus_id);
++	if (drv_data->workqueue == NULL)
++		return -EBUSY;
++
++	return 0;
++}
++
++static int start_queue(struct driver_data *drv_data)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&drv_data->lock, flags);
++
++	if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
++		spin_unlock_irqrestore(&drv_data->lock, flags);
++		return -EBUSY;
++	}
++
++	drv_data->run = QUEUE_RUNNING;
++	drv_data->cur_msg = NULL;
++	drv_data->cur_transfer = NULL;
++	drv_data->cur_chip = NULL;
++	spin_unlock_irqrestore(&drv_data->lock, flags);
++
++	queue_work(drv_data->workqueue, &drv_data->pump_messages);
++
++	return 0;
++}
++
++static int stop_queue(struct driver_data *drv_data)
++{
++	unsigned long flags;
++	unsigned limit = 500;
++	int status = 0;
++
++	spin_lock_irqsave(&drv_data->lock, flags);
++
++	/* This is a bit lame, but is optimized for the common execution path.
++	 * A wait_queue on the drv_data->busy could be used, but then the common
++	 * execution path (pump_messages) would be required to call wake_up or
++	 * friends on every SPI message. Do this instead */
++	drv_data->run = QUEUE_STOPPED;
++	while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
++		spin_unlock_irqrestore(&drv_data->lock, flags);
++		msleep(10);
++		spin_lock_irqsave(&drv_data->lock, flags);
++	}
++
++	if (!list_empty(&drv_data->queue) || drv_data->busy)
++		status = -EBUSY;
++
++	spin_unlock_irqrestore(&drv_data->lock, flags);
++
++	return status;
++}
++
++static int destroy_queue(struct driver_data *drv_data)
++{
++	int status;
++
++	status = stop_queue(drv_data);
++	if (status != 0)
++		return status;
++
++	destroy_workqueue(drv_data->workqueue);
++
++	return 0;
++}
++
++
++static void cleanup(struct spi_device *spi)
++{
++	struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
++
++	dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n",
++		spi->master->bus_num, spi->chip_select);
++
++	kfree(chip);
++}
++
++
++/****************************************************************************/
++
++/*
++ * Generic Device driver routines and interface implementation
++ */
++
++static int coldfire_spi_probe(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	struct coldfire_spi_master *platform_info;
++	struct spi_master *master;
++	struct driver_data *drv_data = 0;
++	struct resource *memory_resource;
++	int irq;
++	int status = 0;
++	int i;
++#if defined(SPI_DSPI_EDMA)
++	dma_addr_t dma_handle;
++#endif
++
++	platform_info = (struct coldfire_spi_master *)dev->platform_data;
++
++	master = spi_alloc_master(dev, sizeof(struct driver_data));
++	if (!master)
++		return -ENOMEM;
++
++ 	drv_data = spi_master_get_devdata(master);
++ 	drv_data->master = master;
++
++	INIT_LIST_HEAD(&drv_data->queue);
++	spin_lock_init(&drv_data->lock);
++
++	master->bus_num = platform_info->bus_num;
++	master->num_chipselect = platform_info->num_chipselect;
++	master->cleanup = cleanup;
++	master->setup = setup;
++	master->transfer = transfer;
++
++	drv_data->cs_control = platform_info->cs_control;
++	if (drv_data->cs_control)
++		for (i = 0; i < master->num_chipselect; i++)
++			drv_data->cs_control(i, QSPI_CS_INIT | QSPI_CS_DROP);
++
++	/* Setup register addresses */
++	memory_resource = platform_get_resource_byname(pdev,
++				IORESOURCE_MEM, "spi-module");
++	if (!memory_resource) {
++		dev_dbg(dev, "can not find platform module memory\n");
++		goto out_error_master_alloc;
++	}
++
++#if defined(SPI_DSPI_EDMA)
++	drv_data->edma_tx_buf = dma_alloc_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \
++						   &dma_handle, GFP_DMA);
++	if (!drv_data->edma_tx_buf) {
++		dev_dbg(dev, "cannot allocate eDMA TX memory\n");
++		goto out_error_master_alloc;
++	}
++	drv_data->edma_rx_buf = dma_alloc_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \
++						   &dma_handle, GFP_DMA);
++	if (!drv_data->edma_rx_buf) {
++		dma_free_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \
++				  drv_data->edma_tx_buf, dma_handle);
++		kfree(drv_data->edma_tx_buf);
++		dev_dbg(dev, "cannot allocate eDMA RX memory\n");
++		goto out_error_master_alloc;
++	}
++#endif
++
++	drv_data->mcr = (void *)&MCF_DSPI_DMCR;
++	drv_data->ctar = (void *)&MCF_DSPI_DCTAR0;
++	drv_data->dspi_sr = (void *)&MCF_DSPI_DSR;
++	drv_data->dspi_rser = (void *)&MCF_DSPI_DRSER;
++	drv_data->dspi_dtfr = (void *)&MCF_DSPI_DTFR;
++	drv_data->dspi_drfr = (void *)&MCF_DSPI_DRFR;
++
++	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
++						       "spi-par");
++	if (!memory_resource) {
++		dev_dbg(dev, "No spi-par memory\n");
++		goto out_error_master_alloc;
++	}
++	drv_data->par = (void *)memory_resource->start;
++
++	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
++						       "spi-int-level");
++	if (!memory_resource) {
++		dev_dbg(dev, "No spi-int-level memory\n");
++		goto out_error_master_alloc;
++	}
++	drv_data->int_icr = (void *)memory_resource->start;
++
++	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
++						       "spi-int-mask");
++	if (!memory_resource) {
++		dev_dbg(dev, "No spi-int-mask memory\n");
++		goto out_error_master_alloc;
++	}
++	drv_data->int_mr = (void *)memory_resource->start;
++
++	if (platform_info->irq_list) {
++		/* multiple IRQs */
++		int *irqlist = platform_info->irq_list;
++		while ((irq = *irqlist++)) {
++			int off = *irqlist++;
++			int lvl = *irqlist++;
++			int msk = *irqlist++;
++			status = request_irq(irq, dspi_interrupt, IRQF_DISABLED,
++					     dev->bus_id, drv_data);
++			if (status < 0) {
++				dev_err(&pdev->dev, 
++					"Unable to attach ColdFire DSPI interrupt\n");
++				goto out_error_master_alloc;
++			}
++
++			if (lvl)
++				*(drv_data->int_icr + off) = lvl;
++
++			if (msk)
++				*drv_data->int_mr &= ~msk;
++		}
++	}
++	else {
++		irq = platform_info->irq_vector;
++
++		status = request_irq(platform_info->irq_vector, dspi_interrupt,
++				     IRQF_DISABLED, dev->bus_id, drv_data);
++		if (status < 0) {
++			dev_err(&pdev->dev, "Unable to attach ColdFire DSPI interrupt\n");
++			goto out_error_master_alloc;
++		}
++
++		*drv_data->int_icr = platform_info->irq_lp;
++		*drv_data->int_mr &= ~platform_info->irq_mask;
++	}
++
++	/* Now that we have all the addresses etc.  Let's set it up */
++	if (platform_info->par_val)
++		*drv_data->par = platform_info->par_val;
++
++	/* Initial and start queue */
++	status = init_queue(drv_data);
++	if (status != 0) {
++		dev_err(&pdev->dev, "Problem initializing DSPI queue\n");
++		goto out_error_irq_alloc;
++	}
++	status = start_queue(drv_data);
++	if (status != 0) {
++		dev_err(&pdev->dev, "Problem starting DSPI queue\n");
++		goto out_error_irq_alloc;
++	}
++
++	/* Register with the SPI framework */
++	platform_set_drvdata(pdev, drv_data);
++	status = spi_register_master(master);
++	if (status != 0) {
++		dev_err(&pdev->dev, "Problem registering DSPI master\n");
++		status = -EINVAL;
++		goto out_error_queue_alloc;
++	}
++
++#if defined(SPI_DSPI_EDMA)
++	if (mcf_edma_request_channel(DSPI_DMA_TX_TCD,
++				     edma_tx_handler,
++				     NULL,
++				     0x0,
++				     pdev,
++				     NULL, /* spinlock */
++				     DRIVER_NAME) < 0){
++		dev_err(&pdev->dev, "eDMA transmit channel request\n");
++		status = -EINVAL;
++		goto out_error_queue_alloc;
++	}
++
++	if (mcf_edma_request_channel(DSPI_DMA_RX_TCD,
++				     edma_rx_handler,
++				     NULL,
++				     0x0,
++				     pdev,
++				     NULL, /* spinlock */
++				     DRIVER_NAME) < 0){
++		dev_err(&pdev->dev, "eDAM receive channel request\n");
++		status = -EINVAL;
++		mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev);
++		goto out_error_queue_alloc;
++	}
++#endif
++
++	printk(KERN_INFO "DSPI: Coldfire master initialized\n");
++	return status;
++
++out_error_queue_alloc:
++	destroy_queue(drv_data);
++
++out_error_irq_alloc:
++	free_irq(platform_info->irq_vector, drv_data);
++
++out_error_master_alloc:
++	spi_master_put(master);
++	return status;
++
++}
++
++static int coldfire_spi_remove(struct platform_device *pdev)
++{
++	struct driver_data *drv_data = platform_get_drvdata(pdev);
++	int irq;
++	int status = 0;
++
++	if (!drv_data)
++		return 0;
++
++#if defined(SPI_DSPI_EDMA)
++	mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev);
++	mcf_edma_free_channel(DSPI_DMA_RX_TCD, pdev);
++#endif
++
++	/* Remove the queue */
++	status = destroy_queue(drv_data);
++	if (status != 0)
++		return status;
++
++	/* Release IRQ */
++	irq = platform_get_irq(pdev, 0);
++	if (irq >= 0)
++		free_irq(irq, drv_data);
++
++	/* Disconnect from the SPI framework */
++	spi_unregister_master(drv_data->master);
++
++	/* Prevent double remove */
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++static void coldfire_spi_shutdown(struct platform_device *pdev)
++{
++	int status = coldfire_spi_remove(pdev);
++
++	if (status != 0)
++		dev_err(&pdev->dev, "shutdown failed with %d\n", status);
++}
++
++
++#ifdef CONFIG_PM
++static int suspend_devices(struct device *dev, void *pm_message)
++{
++	pm_message_t *state = pm_message;
++
++	if (dev->power.power_state.event != state->event) {
++		dev_warn(dev, "pm state does not match request\n");
++		return -1;
++	}
++
++	return 0;
++}
++
++static int coldfire_spi_suspend(struct platform_device *pdev,
++				pm_message_t state)
++{
++	struct driver_data *drv_data = platform_get_drvdata(pdev);
++	int status = 0;
++
++	/* Check all childern for current power state */
++	if (device_for_each_child(&pdev->dev,
++		&state, suspend_devices) != 0) {
++		dev_warn(&pdev->dev, "suspend aborted\n");
++		return -1;
++	}
++
++	status = stop_queue(drv_data);
++	if (status != 0)
++		return status;
++
++	return 0;
++}
++
++static int coldfire_spi_resume(struct platform_device *pdev)
++{
++	struct driver_data *drv_data = platform_get_drvdata(pdev);
++	int status = 0;
++
++	/* Start the queue running */
++	status = start_queue(drv_data);
++	if (status != 0) {
++		dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
++		return status;
++	}
++
++	return 0;
++}
++#else
++#define coldfire_spi_suspend NULL
++#define coldfire_spi_resume NULL
++#endif /* CONFIG_PM */
++
++static struct platform_driver driver = {
++	.driver = {
++		.name = "spi_coldfire",
++		.bus = &platform_bus_type,
++		.owner = THIS_MODULE,
++	},
++	.probe = coldfire_spi_probe,
++	.remove = __devexit_p(coldfire_spi_remove),
++	.shutdown = coldfire_spi_shutdown,
++	.suspend = coldfire_spi_suspend,
++	.resume = coldfire_spi_resume,
++};
++
++static int __init coldfire_spi_init(void)
++{
++	platform_driver_register(&driver);
++
++	return 0;
++}
++module_init(coldfire_spi_init);
++
++static void __exit coldfire_spi_exit(void)
++{
++	platform_driver_unregister(&driver);
++}
++module_exit(coldfire_spi_exit);
++
++MODULE_AUTHOR("Matt Waddel");
++MODULE_DESCRIPTION("ColdFire DSPI Contoller");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/include/asm-m68k/mcfdspi.h
+@@ -0,0 +1,48 @@
++/*
++ * mcfdspi.h-DSPI controller for the ColdFire processors.
++ *
++ * Andrey Butok
++ * Copyright Freescale Semiconductor, Inc. 2008
++ *
++ *    This file is based on mcfqspi.h
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ ***************************************************************************
++ * Changes:
++ *   v0.001	25 March 2008		Andrey Butok
++ *   		Initial Release - developed on uClinux with 2.6.23 kernel.
++ *
++ */
++
++#ifndef MCFDSPI_H_
++#define MCFDSPI_H_
++
++struct coldfire_dspi_chip {
++	u8 mode;
++	u8 bits_per_word;
++	u16 void_write_data;
++	/* Only used in master mode */
++	u8 dbr;		/* Double baud rate */
++	u8 pbr;		/* Baud rate prescaler */
++	u8 br;		/* Baud rate scaler */
++	u8 pcssck;	/* PCS to SCK delay prescaler */
++	u8 pasc;	/* After SCK delay prescaler */
++	u8 pdt;		/* Delay after transfer prescaler */
++	u8 cssck;	/* PCS to SCK delay scaler */
++	u8 asc;		/* After SCK delay scaler */
++	u8 dt;		/* Delay after transfer scaler */
++};
++#endif /*MCFDSPI_H_*/
diff --git a/target/linux/coldfire/patches/081-mcfv4e_vmalloc_fix.patch b/target/linux/coldfire/patches/081-mcfv4e_vmalloc_fix.patch
new file mode 100644
index 0000000000..2bb2db60f0
--- /dev/null
+++ b/target/linux/coldfire/patches/081-mcfv4e_vmalloc_fix.patch
@@ -0,0 +1,60 @@
+From db94c8c3ec831b5fab828487ba05041bc048fccf Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Tue, 15 Jul 2008 17:48:11 -0600
+Subject: [PATCH] Move VMALLOC region to a valid area.
+
+LTIBName: mcfv4e-vmalloc-fix
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/mm/cf-mmu.c      |    7 +------
+ include/asm-m68k/pgtable.h |    6 +++++-
+ 2 files changed, 6 insertions(+), 7 deletions(-)
+
+--- a/arch/m68k/mm/cf-mmu.c
++++ b/arch/m68k/mm/cf-mmu.c
+@@ -35,7 +35,7 @@
+ #include <asm/coldfire.h>
+ #include <asm/tlbflush.h>
+ 
+-#define KMAPAREA(x)	((x >= KMAP_START) && ( x < KMAP_END))
++#define KMAPAREA(x)	((x >= VMALLOC_START) && ( x < KMAP_END))
+ 
+ #undef DEBUG
+ 
+@@ -62,11 +62,6 @@ void free_initmem(void)
+ 	unsigned long start = (unsigned long)&__init_begin;
+ 	unsigned long end = (unsigned long)&__init_end;
+ 
+-/* 
+- * JKM -- revisit -- the latest round of vmlinux.lds changes has caused
+- * a little grief with how init areas are handled.  With the new toolchain
+- * release I'll fix this.
+- */
+ 	printk(KERN_INFO "free_initmem: __init_begin = 0x%lx  __init_end = 0x%lx\n", start, end);
+ 
+ 	addr = (unsigned long)&__init_begin;
+--- a/include/asm-m68k/pgtable.h
++++ b/include/asm-m68k/pgtable.h
+@@ -73,7 +73,9 @@
+ #define KMAP_START     0x0DC00000
+ #define KMAP_END       0x0E000000
+ #elif defined(CONFIG_COLDFIRE)
+-#define KMAP_START	0xd0000000
++#define	VMALLOC_START	0xc0000000
++#define VMALLOC_END	0xcfffffff
++#define KMAP_START	(VMALLOC_END + 1)
+ #define KMAP_END	0xe0000000
+ #else
+ #define	KMAP_START	0xd0000000
+@@ -88,9 +90,11 @@
+  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+  * area for the same reason. ;)
+  */
++#if !defined(CONFIG_COLDFIRE)
+ #define VMALLOC_OFFSET	(8*1024*1024)
+ #define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+ #define VMALLOC_END KMAP_START
++#endif
+ #else
+ extern unsigned long vmalloc_end;
+ #define VMALLOC_START 0x0f800000
diff --git a/target/linux/coldfire/patches/086-m547x_8x_dma_dipr.patch b/target/linux/coldfire/patches/086-m547x_8x_dma_dipr.patch
new file mode 100644
index 0000000000..8ce9502e4f
--- /dev/null
+++ b/target/linux/coldfire/patches/086-m547x_8x_dma_dipr.patch
@@ -0,0 +1,24 @@
+From 6cf498f4cf1930950d31aff5669bdba97d12364c Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 17 Jul 2008 15:02:23 -0600
+Subject: [PATCH] Properly clear bits in DIPR.
+
+Bugzilla 1351.
+
+LTIBName: m547x-8x-dma-dipr
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/m547x_8x-dma.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+--- a/arch/m68k/coldfire/m547x_8x-dma.c
++++ b/arch/m68k/coldfire/m547x_8x-dma.c
+@@ -455,7 +455,7 @@ irqreturn_t dma_interrupt_handler(int ir
+ 	 * pending interrupts with those that aren't masked.
+ 	 */
+ 	interrupts = MCF_DMA_DIPR;
+-	MCF_DMA_DIPR |= interrupts;
++	MCF_DMA_DIPR = interrupts;
+ 
+ 	for (i = 0; i < 16; ++i, interrupts >>= 1) {
+ 		if (interrupts & 0x1)
diff --git a/target/linux/coldfire/patches/087-m547x_8x_reboot_wd.patch b/target/linux/coldfire/patches/087-m547x_8x_reboot_wd.patch
new file mode 100644
index 0000000000..3316cbfee4
--- /dev/null
+++ b/target/linux/coldfire/patches/087-m547x_8x_reboot_wd.patch
@@ -0,0 +1,36 @@
+From b3a11478f28a24b719ff6426f52216c37c3331d7 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 17 Jul 2008 17:02:29 -0600
+Subject: [PATCH] Enable watchdog to reboot the processor.
+
+LTIBName: m547x-8x-reboot-wd
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ arch/m68k/coldfire/config.c |    9 +++++++++
+ 1 files changed, 9 insertions(+), 0 deletions(-)
+
+--- a/arch/m68k/coldfire/config.c
++++ b/arch/m68k/coldfire/config.c
+@@ -50,6 +50,10 @@
+ #include <asm/mcf5445x_xbs.h>
+ #endif
+ 
++#ifdef CONFIG_M547X_8X
++#include <asm/m5485gpt.h>
++#endif
++
+ extern int get_irq_list(struct seq_file *p, void *v);
+ extern char _text, _end;
+ extern char _etext, _edata, __init_begin, __init_end;
+@@ -379,6 +383,11 @@ void coldfire_reboot(void)
+ 	    "moveb #0x80, %%d0\n\t"
+ 	    "moveb %%d0, 0xfc0a0000\n\t"
+ 	    : : : "%d0");
++#elif defined(CONFIG_M547X_8X)
++	/* disable interrupts and enable the watchdog */
++	printk(KERN_INFO "Rebooting\n");
++	asm("movew #0x2700, %sr\n");
++	MCF_GPT_GMS0 = MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4);
+ #endif
+ }
+ 
diff --git a/target/linux/coldfire/patches/088-m547x_8x_i2c_timeout_fix.patch b/target/linux/coldfire/patches/088-m547x_8x_i2c_timeout_fix.patch
new file mode 100644
index 0000000000..dbc3c994bb
--- /dev/null
+++ b/target/linux/coldfire/patches/088-m547x_8x_i2c_timeout_fix.patch
@@ -0,0 +1,123 @@
+From b9607c9083b767eac26df1d39a030f3cba5d3ae3 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Fri, 18 Jul 2008 12:40:04 -0600
+Subject: [PATCH] Increase timeouts on I2C bus.
+
+LTIBName: m547x-8x-i2c-timeout-fix
+Signed-off-by: Shrek Wu <b16972@freescale.com>
+---
+ drivers/i2c/busses/i2c-mcf548x.c |   40 +++++++++++++++++++++++++++++--------
+ 1 files changed, 31 insertions(+), 9 deletions(-)
+
+--- a/drivers/i2c/busses/i2c-mcf548x.c
++++ b/drivers/i2c/busses/i2c-mcf548x.c
+@@ -43,8 +43,8 @@ static struct i2c_adapter i2c_mcf_board_
+ 	.id = I2C_HW_MPC107,
+ 	.algo_data = &i2c_mcf_board_data,
+ 	.class = I2C_CLASS_HWMON,
+-	.timeout = 1,
+-	.retries = 1
++	.timeout = 100,
++	.retries = 2
+ };
+ /*
+  *  static void i2c_start()
+@@ -105,7 +105,7 @@ wait_for_bb(
+ 	for (i = 0; i < adap->timeout; i++) {
+ 		if (!(MCF_I2SR & MCF_I2SR_IBB))
+ 			return 0;
+-		udelay(10);
++		udelay(100);
+ 	}
+ 	printk(KERN_ERR "%s: timeout", __FUNCTION__);
+ 	return -ETIMEDOUT;
+@@ -124,7 +124,7 @@ wait_for_not_bb(
+ 	for (i = 0; i < adap->timeout; i++) {
+ 		if (MCF_I2SR & MCF_I2SR_IBB)
+ 			return 0;
+-		udelay(10);
++		udelay(100);
+ 	}
+ 	printk(KERN_ERR "%s: timeout", __FUNCTION__);
+ 	return -ETIMEDOUT;
+@@ -146,7 +146,7 @@ wait_xfer_done(
+ 			MCF_I2SR &= ~MCF_I2SR_IIF;
+ 			return 0;
+ 		}
+-		udelay(1);
++		udelay(10);
+ 	}
+ 	printk(KERN_ERR "%s: timeout", __FUNCTION__);
+ 	return -ETIMEDOUT;
+@@ -166,7 +166,7 @@ i2c_set_addr(
+ ) {
+ 	unsigned short flags = msg->flags;
+ 	unsigned char addr;
+-
++	MCF_I2CR |= MCF_I2CR_MTX;
+ 	if ((flags & I2C_M_TEN)) {
+ 		/* 10 bit address not supported yet */
+ 		return -EIO;
+@@ -269,7 +269,7 @@ mcf_sendbytes(
+ 		i2c_stop(adap);
+ 		wait_for_bb(adap);
+ 	} else {
+-		i2c_repstart(adap);
++	/*	i2c_repstart(adap);*/
+ 	}
+ 
+ 	return (i);
+@@ -330,7 +330,7 @@ mcf_readbytes(
+ 		i2c_stop(adap);
+ 		wait_for_bb(adap);
+ 	} else {
+-		i2c_repstart(adap);
++	/*	i2c_repstart(adap);*/
+ 	}
+ 
+ 	return (i+1);
+@@ -380,6 +380,27 @@ mcf_xfer(
+ 	wait_for_bb(adap);
+ 
+ 	for (i = 0; ret >= 0 && i < num; i++) {
++		if (MCF_I2SR & MCF_I2SR_IBB) {
++			MCF_I2ICR = 0x00;
++			MCF_I2CR  = 0x00;
++                	MCF_I2CR  = 0x0A;
++                	timeout = MCF_I2DR;
++                	MCF_I2SR  = 0x00;
++                	MCF_I2CR  = 0x00;
++			MCF_I2ICR = 0x01;
++		}
++		/* setup SCL clock */
++		MCF_I2FDR = get_clock(adap);
++		/* set slave address */
++		MCF_I2AR = get_own(adap);
++		/* enable I2C module */
++		MCF_I2CR = MCF_I2CR_IEN;
++
++		MCF_I2CR |= MCF_I2CR_TXAK;
++
++		/* Check for bus busy */
++		wait_for_bb(adap);
++
+ 		pmsg = &msgs[i];
+ 
+ 		printk(KERN_DEBUG "i2c-algo-mcf: Doing %s %d bytes "
+@@ -388,7 +409,7 @@ mcf_xfer(
+ 			pmsg->len, pmsg->addr, i + 1, num);
+ 
+ 		/* Send START */
+-		if (i == 0)
++		/*if (i == 0)*/
+ 			i2c_start(adap);
+ 
+ 		/* Wait for Bus Busy */
+@@ -440,6 +461,7 @@ mcf_xfer(
+ 					"%d bytes.\n", ret);
+ 			}
+ 		}
++	MCF_I2CR = 0;
+ 	}
+ 
+ 	/* Disable I2C module */
diff --git a/target/linux/coldfire/patches/089-m547x_8x_pci_reset_usb_fix.patch b/target/linux/coldfire/patches/089-m547x_8x_pci_reset_usb_fix.patch
new file mode 100644
index 0000000000..79a1e3930e
--- /dev/null
+++ b/target/linux/coldfire/patches/089-m547x_8x_pci_reset_usb_fix.patch
@@ -0,0 +1,49 @@
+Bugzilla 1647. This patch resets PCI which fixes the USB problem on mcf5475.
+
+Set PCI registers MCF_PCIGSCR and MCF_PCITCR to their reset defaults. 
+This fixes the USB problem and enables other PCI cards, such as PCI
+network to function properly.
+
+Original work of Matt Waddel
+Signed-off-by: Ross Wille
+
+--- a/arch/m68k/coldfire/mcf548x-pci.c
++++ b/arch/m68k/coldfire/mcf548x-pci.c
+@@ -1,5 +1,23 @@
+ /*
+  * 	ColdFire 547x/548x PCI Host Controller functions
++ *
++ * Copyright (c) 2005-2008 Freescale Semiconductor, Inc.
++ *
++ * This code is based on the 2.6.10 version of pci.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+  */
+ #include <linux/kernel.h>
+ #include <linux/types.h>
+@@ -815,6 +833,13 @@ struct pci_bus_info *__init init_coldfir
+ 		return NULL;
+ 	}
+ 
++	/* Must Reset!!! If bootloader has PCI enabled, it will cause
++	 * problem in linux when it tries to configure/find resources
++	 * for the pci devices.  Both registers need to be reset.
++	 */
++	MCF_PCIGSCR = 0x1;
++	MCF_PCITCR = 0x00000000;
++
+ 	/* Set up the arbiter */
+ 	MCF_PCIARB_PACR = 0 /*MCF_PCIARB_PACR_PKMD*/
+ 			| MCF_PCIARB_PACR_INTMPRI 
diff --git a/target/linux/coldfire/patches/090-m547x_8x_fec_rxfifo_check.patch b/target/linux/coldfire/patches/090-m547x_8x_fec_rxfifo_check.patch
new file mode 100644
index 0000000000..85f89c16d7
--- /dev/null
+++ b/target/linux/coldfire/patches/090-m547x_8x_fec_rxfifo_check.patch
@@ -0,0 +1,27 @@
+Re-enable rx fifo buffer checks.
+
+LTIBName: linux-2.6.25-m547x-8x-fec-rxfifo-check
+Acked-by: Kurt Mahan <kmahan@freescale.com>
+Signed-off-by: Shrek Wu <b16972@freescale.com>
+--- a/drivers/net/fec/fec.c
++++ b/drivers/net/fec/fec.c
+@@ -941,9 +941,9 @@ void fec_interrupt_fec_rx_handler(struct
+ {
+ 	struct fec_priv *fp = netdev_priv(dev);
+ 	struct sk_buff *skb;
++	int i;
+ 
+ 	fp->fecpriv_rxflag = 1;
+-/*
+ 	// Some buffers can be missed
+ 	if(!(fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME))
+ 	{
+@@ -961,7 +961,7 @@ void fec_interrupt_fec_rx_handler(struct
+ 			return;
+ 		}
+ 	}
+-*/
++
+ 	for (; fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME;	fp->fecpriv_current_rx = (fp->fecpriv_current_rx + 1) & FEC_RX_INDEX_MASK) {
+ 	    if( (fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length <= FEC_MAXBUF_SIZE) &&
+ 		    (fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length > 4)) { /* --tym-- */
diff --git a/target/linux/coldfire/patches/100-compile_fixes.patch b/target/linux/coldfire/patches/100-compile_fixes.patch
index 7a579b3628..0f0694e2f0 100644
--- a/target/linux/coldfire/patches/100-compile_fixes.patch
+++ b/target/linux/coldfire/patches/100-compile_fixes.patch
@@ -9,18 +9,6 @@
  {
  	pgd_val(*pgdp) = virt_to_phys(pmdp);
  }
---- a/include/asm-m68k/irq.h
-+++ b/include/asm-m68k/irq.h
-@@ -61,7 +61,8 @@
- 
- #define IRQ_USER	8
- 
--extern unsigned int irq_canonicalize(unsigned int irq);
-+//extern unsigned int irq_canonicalize(unsigned int irq);
-+#define irq_canonicalize(irq)  (irq)
- 
- struct pt_regs;
- 
 --- a/arch/m68k/mm/cf-mmu.c
 +++ b/arch/m68k/mm/cf-mmu.c
 @@ -21,6 +21,7 @@