aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ath79/dts/qca9533_openmesh_om2p-v4.dts8
-rw-r--r--target/linux/ath79/dts/qca9533_openmesh_om2p-v4.dtsi157
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/generic/base-files/lib/upgrade/openmesh.sh112
-rw-r--r--target/linux/ath79/generic/base-files/lib/upgrade/platform.sh4
-rw-r--r--target/linux/ath79/image/generic.mk20
7 files changed, 306 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9533_openmesh_om2p-v4.dts b/target/linux/ath79/dts/qca9533_openmesh_om2p-v4.dts
new file mode 100644
index 0000000000..b738afad33
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_openmesh_om2p-v4.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_openmesh_om2p-v4.dtsi"
+
+/ {
+ compatible = "openmesh,om2p-v4", "qca,qca9533";
+ model = "OpenMesh OM2P v4";
+};
diff --git a/target/linux/ath79/dts/qca9533_openmesh_om2p-v4.dtsi b/target/linux/ath79/dts/qca9533_openmesh_om2p-v4.dtsi
new file mode 100644
index 0000000000..74daba3f93
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_openmesh_om2p-v4.dtsi
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ /delete-property/ bootargs;
+ };
+
+ aliases {
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_blue;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_blue;
+ label-mac-device = &eth0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_blue: power_blue {
+ label = "blue:power";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wifi_green {
+ label = "green:wifi";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_yellow {
+ label = "yellow:wifi";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi_red {
+ label = "red:wifi";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_blue {
+ label = "blue:wan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan_blue {
+ label = "blue:lan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
+ hw_margin_ms = <60000>;
+ always-running;
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ /* partitions are passed via bootloader */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x040000>;
+ };
+
+ partition@80000 {
+ label = "custom";
+ reg = <0x080000 0x140000>;
+ read-only;
+ };
+
+ partition@1c0000 {
+ label = "inactive";
+ reg = <0x1c0000 0x700000>;
+ };
+
+ partition@8c0000 {
+ label = "inactive2";
+ reg = <0x8c0000 0x700000>;
+ };
+
+ art: partition@fc0000 {
+ label = "ART";
+ reg = <0xfc0000 0x040000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+&eth1 {
+ /* Workaround: keep the Ethernet interfaces order/mapping correct
+ * (GMAC0 -> eth0, GMAC1 -> eth1, same as in old ar71xx target)
+ */
+ compatible = "qca,qca9530-eth", "syscon", "simple-mfd";
+
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <2>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 443cccce81..8095712e88 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -230,6 +230,10 @@ netgear,wnr2200-16m)
ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "amber:lan3" "switch0" "0x08" "0x02"
ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "amber:lan4" "switch0" "0x10" "0x02"
;;
+openmesh,om2p-v4)
+ ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0"
+ ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x02"
+ ;;
pcs,cr3000)
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x04"
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 14e858b8fa..fa98b18e59 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -152,6 +152,7 @@ ath79_setup_interfaces()
comfast,cf-e120a-v3|\
comfast,cf-e314n-v2|\
compex,wpj531-16m|\
+ openmesh,om2p-v4|\
plasmacloud,pa300|\
plasmacloud,pa300e|\
tplink,cpe210-v1|\
diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/openmesh.sh b/target/linux/ath79/generic/base-files/lib/upgrade/openmesh.sh
new file mode 100644
index 0000000000..35a4ccfbfe
--- /dev/null
+++ b/target/linux/ath79/generic/base-files/lib/upgrade/openmesh.sh
@@ -0,0 +1,112 @@
+# The U-Boot loader of the OpenMesh devices requires image sizes and
+# checksums to be provided in the U-Boot environment.
+# The OpenMesh devices come with 2 main partitions - while one is active
+# sysupgrade will flash the other. The boot order is changed to boot the
+# newly flashed partition. If the new partition can't be booted due to
+# upgrade failures the previously used partition is loaded.
+
+cfg_value_get()
+{
+ local cfg=$1 cfg_opt
+ local section=$2 our_section=0
+ local param=$3 our_param=
+
+ for cfg_opt in $cfg; do
+ [ "$cfg_opt" = "[$section]" ] && our_section=1 && continue
+ [ "$our_section" = "1" ] || continue
+
+ our_param=${cfg_opt%%=*}
+ [ "$param" = "$our_param" ] && echo ${cfg_opt##*=} && break
+ done
+}
+
+platform_do_upgrade_openmesh()
+{
+ local img_path="$1"
+ local restore_backup
+
+ local setenv_script="/tmp/fw_env_upgrade"
+
+ local inactive_mtd="$(find_mtd_index $PART_NAME)"
+ local inactive_offset="$(cat /sys/class/mtd/mtd${inactive_mtd}/offset)"
+ local total_size="$(cat /sys/class/mtd/mtd${inactive_mtd}/size)"
+ local flash_start_mem=0x9f000000
+ local data_offset=$((64 * 1024))
+
+ # detect to which flash region the new image is written to.
+ #
+ # 1. check what is the mtd index for the first flash region on this
+ # device
+ # 2. check if the target partition ("inactive") has the mtd index of
+ # the first flash region
+ #
+ # - when it is: the new bootseq will be 1,2 and the first region is
+ # modified
+ # - when it isn't: bootseq will be 2,1 and the second region is
+ # modified
+ #
+ # The detection has to be done via the hardcoded mtd partition because
+ # the current boot might be done with the fallback region. Let us
+ # assume that the current bootseq is 1,2. The bootloader detected that
+ # the image in flash region 1 is corrupt and thus switches to flash
+ # region 2. The bootseq in the u-boot-env is now still the same and
+ # the sysupgrade code can now only rely on the actual mtd indexes and
+ # not the bootseq variable to detect the currently booted flash
+ # region/image.
+ #
+ # In the above example, an implementation which uses bootseq ("1,2") to
+ # detect the currently booted image would assume that region 1 is booted
+ # and then overwrite the variables for the wrong flash region (aka the
+ # one which isn't modified). This could result in a device which doesn't
+ # boot anymore to Linux until it was reflashed with ap51-flash.
+ local next_boot_part="1"
+ local primary_kernel_mtd="3"
+ [ "$inactive_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2"
+
+ local cfg_size=$(dd if="$img_path" bs=2 skip=35 count=4 2>/dev/null)
+ local cfg_length=$((0x$cfg_size))
+ local cfg_content=$(dd if="$img_path" bs=1 skip=$data_offset count=$cfg_length 2>/dev/null)
+
+ local kernel_size=$(dd if="$img_path" bs=2 skip=71 count=4 2>/dev/null)
+ local kernel_length=$((0x$kernel_size))
+ local kernel_md5=$(cfg_value_get "$cfg_content" "vmlinux" "md5sum")
+
+ local rootfs_size=$(dd if="$img_path" bs=2 skip=107 count=4 2>/dev/null)
+ local rootfs_length=$((0x$rootfs_size))
+ local rootfs_md5=$(cfg_value_get "$cfg_content" "rootfs" "md5sum")
+ local rootfs_checksize=$(cfg_value_get "$cfg_content" "rootfs" "checksize")
+
+ # take care of restoring a saved config
+ [ -n "$UPGRADE_BACKUP" ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}"
+
+ # write image parts
+ mtd -q erase inactive
+ dd if="$img_path" bs=1 skip=$((data_offset + cfg_length + kernel_length)) count=$rootfs_length 2>&- | \
+ mtd -n -p $kernel_length $restore_backup write - $PART_NAME
+ dd if="$img_path" bs=1 skip=$((data_offset + cfg_length)) count=$kernel_length 2>&- | \
+ mtd -n write - $PART_NAME
+
+ # prepare new u-boot env
+ if [ "$next_boot_part" = "1" ]; then
+ echo "bootseq 1,2" > $setenv_script
+ else
+ echo "bootseq 2,1" > $setenv_script
+ fi
+
+ printf "kernel_size_%i %i\n" $next_boot_part $((kernel_length / 1024)) >> $setenv_script
+ printf "vmlinux_start_addr 0x%08x\n" $((flash_start_mem + inactive_offset)) >> $setenv_script
+ printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script
+ printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
+
+ printf "rootfs_size_%i %i\n" $next_boot_part $(((total_size-kernel_length) / 1024)) >> $setenv_script
+ printf "rootfs_start_addr 0x%08x\n" $((flash_start_mem+inactive_offset+kernel_length)) >> $setenv_script
+ printf "rootfs_size %s\n" $rootfs_checksize >> $setenv_script
+ printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
+
+ # store u-boot env changes
+ mkdir -p /var/lock
+ fw_setenv -s $setenv_script || {
+ echo "failed to update U-Boot environment"
+ return 1
+ }
+}
diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
index 98861685dc..88dac75301 100644
--- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
@@ -50,6 +50,10 @@ platform_do_upgrade() {
jjplus,ja76pf2)
redboot_fis_do_upgrade "$1" linux
;;
+ openmesh,om2p-v4)
+ PART_NAME="inactive"
+ platform_do_upgrade_openmesh "$1"
+ ;;
plasmacloud,pa300|\
plasmacloud,pa300e)
PART_NAME="inactive"
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 63a07a9d5c..132bde73c4 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1557,6 +1557,26 @@ define Device/ocedo_ursus
endef
TARGET_DEVICES += ocedo_ursus
+define Device/openmesh_om2p-common
+ DEVICE_VENDOR := OpenMesh
+ DEVICE_PACKAGES := uboot-envtools
+ IMAGE_SIZE := 7168k
+ BLOCKSIZE := 256k
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | \
+ pad-to $$(BLOCKSIZE)
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
+ openmesh-image ce_type=OM2P | append-metadata
+endef
+
+define Device/openmesh_om2p-v4
+ $(Device/openmesh_om2p-common)
+ SOC := qca9533
+ DEVICE_MODEL := OM2P
+ DEVICE_VARIANT := v4
+ SUPPORTED_DEVICES += om2pv4
+endef
+TARGET_DEVICES += openmesh_om2p-v4
+
define Device/openmesh_om5p-ac-v2
SOC := qca9558
DEVICE_VENDOR := OpenMesh