aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh13
-rw-r--r--target/linux/ramips/base-files/etc/uci-defaults/09_fix-checksum (renamed from target/linux/ramips/base-files/etc/uci-defaults/09_fix-seama-header)9
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rw-r--r--target/linux/ramips/dts/DAP-1522-A1.dts139
-rw-r--r--target/linux/ramips/image/rt288x.mk16
-rw-r--r--target/linux/ramips/rt288x/config-4.91
7 files changed, 173 insertions, 9 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 1ccff892b1..8f0a2b0725 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -242,6 +242,7 @@ ramips_setup_interfaces()
;;
cs-qr10|\
d105|\
+ dap-1522-a1|\
dch-m225|\
ex2700|\
ex3700|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index e38311d5e5..342a648687 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -147,6 +147,13 @@ get_status_led() {
youku-yk1)
status_led="$boardname:blue:power"
;;
+ dap-1522-a1|\
+ k2p|\
+ m3|\
+ mir3g|\
+ miwifi-nano)
+ status_led="$boardname:blue:status"
+ ;;
db-wrt01|\
esr-9753|\
pbr-d1)
@@ -174,12 +181,6 @@ get_status_led() {
hc5962)
status_led="$boardname:white:status"
;;
- k2p|\
- m3|\
- mir3g|\
- miwifi-nano)
- status_led="$boardname:blue:status"
- ;;
linkits7688)
status_led="linkit-smart-7688:orange:wifi"
;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/09_fix-seama-header b/target/linux/ramips/base-files/etc/uci-defaults/09_fix-checksum
index 9533aed475..7e579316b5 100644
--- a/target/linux/ramips/base-files/etc/uci-defaults/09_fix-seama-header
+++ b/target/linux/ramips/base-files/etc/uci-defaults/09_fix-checksum
@@ -5,10 +5,10 @@
. /lib/functions.sh
-fix_seama_header() {
+fix_checksum() {
local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd)
- [ "$kernel_size" ] && mtd -c 0x$kernel_size fixseama firmware
+ [ "$kernel_size" ] && mtd -c 0x$kernel_size fix$1 firmware
}
board=$(board_name)
@@ -18,6 +18,9 @@ cy-swr1100 | \
dch-m225 | \
dir-645 | \
dir-860l-b1)
- fix_seama_header
+ fix_checksum seama
+ ;;
+dap-1522-a1)
+ fix_checksum wrg
;;
esac
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 74ed5913b8..9738f01dfe 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -112,6 +112,9 @@ ramips_board_detect() {
*"DAP-1350")
name="dap-1350"
;;
+ *"DAP-1522 A1")
+ name="dap-1522-a1"
+ ;;
*"DB-WRT01")
name="db-wrt01"
;;
diff --git a/target/linux/ramips/dts/DAP-1522-A1.dts b/target/linux/ramips/dts/DAP-1522-A1.dts
new file mode 100644
index 0000000000..8f8d098bd5
--- /dev/null
+++ b/target/linux/ramips/dts/DAP-1522-A1.dts
@@ -0,0 +1,139 @@
+/dts-v1/;
+
+#include "rt2880.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dap-1522-a1", "ralink,rt2880-soc";
+ model = "D-Link DAP-1522 A1";
+
+ cfi@bc400000 {
+ compatible = "cfi-flash";
+ reg = <0xbc400000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ factory: partition@30000 {
+ label = "factory";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0x3a0000>;
+ };
+ };
+
+ rtl8366s {
+ compatible = "realtek,rtl8366s";
+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ ap {
+ label = "ap";
+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+
+ bridge {
+ label = "bridge";
+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "dap-1522-a1:blue:wps";
+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
+ };
+
+ ap {
+ label = "dap-1522-a1:blue:ap";
+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+ };
+
+ sta {
+ label = "dap-1522-a1:red:sta";
+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+ };
+
+ status {
+ label = "dap-1522-a1:blue:status";
+ gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartlite", "pci";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x2004>;
+
+ port@0 {
+ mediatek,fixed-link = <1000 1 1 1>;
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ phy-mode = "mii";
+ reg = <0>;
+ };
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0x2000>;
+};
diff --git a/target/linux/ramips/image/rt288x.mk b/target/linux/ramips/image/rt288x.mk
index 86a506388c..e9627a7431 100644
--- a/target/linux/ramips/image/rt288x.mk
+++ b/target/linux/ramips/image/rt288x.mk
@@ -30,6 +30,22 @@ define Device/ar725w
endef
TARGET_DEVICES += ar725w
+define Device/dap-1522-a1
+ DTS := DAP-1522-A1
+ BLOCKSIZE := 64k
+ IMAGE_SIZE := 3801088
+ DEVICE_TITLE := D-Link DAP-1522 A1
+ DEVICE_PACKAGES := kmod-switch-rtl8366s
+ KERNEL := $(KERNEL_DTB)
+ IMAGES += factory.bin
+ IMAGE/factory.bin := \
+ append-kernel | pad-offset $$$$(BLOCKSIZE) 96 | \
+ append-rootfs | pad-rootfs -x 96 | \
+ wrg-header wapnd01_dlink_dap1522 | \
+ check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += dap-1522-a1
+
define Device/f5d8235-v1
IMAGE_SIZE := 7744k
DEVICE_TITLE := Belkin F5D8235 V1
diff --git a/target/linux/ramips/rt288x/config-4.9 b/target/linux/ramips/rt288x/config-4.9
index 92f1881ffb..b6b9b8963b 100644
--- a/target/linux/ramips/rt288x/config-4.9
+++ b/target/linux/ramips/rt288x/config-4.9
@@ -134,6 +134,7 @@ CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_LZMA_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_MTD_SPLIT_WRGG_FW=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_MEDIATEK_MDIO=y