aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/bmips/Makefile2
-rw-r--r--target/linux/bmips/config-5.1018
-rw-r--r--target/linux/bmips/dts/bcm63168-comtrend-vr-3032u.dts38
-rw-r--r--target/linux/bmips/dts/bcm6318-comtrend-ar-5315u.dts38
-rw-r--r--target/linux/bmips/dts/bcm6318.dtsi98
-rw-r--r--target/linux/bmips/dts/bcm63268.dtsi100
-rw-r--r--target/linux/bmips/dts/bcm6328-comtrend-ar-5387un.dts38
-rw-r--r--target/linux/bmips/dts/bcm6328.dtsi94
-rw-r--r--target/linux/bmips/dts/bcm6362-netgear-dgnd3700-v2.dts6
-rw-r--r--target/linux/bmips/dts/bcm6362.dtsi94
-rw-r--r--target/linux/bmips/dts/bcm6368-comtrend-vr-3025u.dts38
-rw-r--r--target/linux/bmips/dts/bcm6368.dtsi93
-rw-r--r--target/linux/bmips/files/drivers/net/ethernet/broadcom/bcm6368-enetsw.c1116
-rw-r--r--target/linux/bmips/generic/base-files/etc/board.d/02_network17
-rw-r--r--target/linux/bmips/nand/base-files/etc/board.d/02_network15
-rw-r--r--target/linux/bmips/patches-5.10/500-net-dsa-b53-relax-is63xx-condition.patch29
-rw-r--r--target/linux/bmips/patches-5.10/501-net-dsa-b53-mmap-Add-device-tree-support.patch82
-rw-r--r--target/linux/bmips/patches-5.10/502-net-dsa-b53-support-tags-for-legacy-switches.patch209
-rw-r--r--target/linux/bmips/patches-5.10/503-net-broadcom-add-BCM6368-enetsw-controller-driver.patch46
-rw-r--r--target/linux/bmips/patches-5.10/504-net-mdio-Add-BCM6368-MDIO-mux-bus-controller.patch231
20 files changed, 2401 insertions, 1 deletions
diff --git a/target/linux/bmips/Makefile b/target/linux/bmips/Makefile
index 0adc8cd97e..14eff38bb6 100644
--- a/target/linux/bmips/Makefile
+++ b/target/linux/bmips/Makefile
@@ -18,6 +18,6 @@ endef
include $(INCLUDE_DIR)/target.mk
-DEFAULT_PACKAGES += kmod-gpio-button-hotplug
+DEFAULT_PACKAGES += ethtool kmod-gpio-button-hotplug
$(eval $(call BuildTarget))
diff --git a/target/linux/bmips/config-5.10 b/target/linux/bmips/config-5.10
index 749cc0eb69..96a7547593 100644
--- a/target/linux/bmips/config-5.10
+++ b/target/linux/bmips/config-5.10
@@ -3,8 +3,15 @@ CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=15
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_B53=y
+# CONFIG_B53_MDIO_DRIVER is not set
+CONFIG_B53_MMAP_DRIVER=y
+# CONFIG_B53_SERDES is not set
+CONFIG_B53_SPI_DRIVER=y
+# CONFIG_B53_SRAB_DRIVER is not set
CONFIG_BCM6345_EXT_IRQ=y
CONFIG_BCM6345_L1_IRQ=y
+CONFIG_BCM6368_ENETSW=y
CONFIG_BCM63XX_POWER=y
CONFIG_BCM7038_L1_IRQ=y
CONFIG_BCM7038_WDT=y
@@ -103,6 +110,7 @@ CONFIG_GPIOLIB=y
# CONFIG_GPIO_BRCMSTB is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GRO_CELLS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
@@ -128,6 +136,8 @@ CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BUS=y
+CONFIG_MDIO_BUS_MUX=y
+CONFIG_MDIO_BUS_MUX_BCM6368=y
CONFIG_MDIO_DEVICE=y
CONFIG_MEMFD_CREATE=y
CONFIG_MFD_SYSCON=y
@@ -163,7 +173,14 @@ CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_JEDECPROBE=y
# CONFIG_MTD_PARSER_IMAGETAG is not set
CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_TAG_BRCM=y
+CONFIG_NET_DSA_TAG_BRCM_COMMON=y
+CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
+CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_SWITCHDEV=y
CONFIG_NO_EXCEPT_FILL=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
CONFIG_NR_CPUS=2
@@ -181,6 +198,7 @@ CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
CONFIG_PHYSICAL_START=0x80010000
CONFIG_PHY_BCM63XX_USBH=y
# CONFIG_PHY_BRCM_SATA is not set
diff --git a/target/linux/bmips/dts/bcm63168-comtrend-vr-3032u.dts b/target/linux/bmips/dts/bcm63168-comtrend-vr-3032u.dts
index ed7f51890c..d82247d26c 100644
--- a/target/linux/bmips/dts/bcm63168-comtrend-vr-3032u.dts
+++ b/target/linux/bmips/dts/bcm63168-comtrend-vr-3032u.dts
@@ -39,6 +39,12 @@
status = "okay";
};
+&ethernet {
+ status = "okay";
+
+ mtd-mac-address = <&cferom 0x6a0>;
+};
+
&leds {
status = "okay";
@@ -177,6 +183,38 @@
status = "okay";
};
+&switch0 {
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan2";
+
+ phy-handle = <&phy1>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+
+ phy-handle = <&phy2>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan4";
+
+ phy-handle = <&phy3>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+
+ phy-handle = <&phy4>;
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
diff --git a/target/linux/bmips/dts/bcm6318-comtrend-ar-5315u.dts b/target/linux/bmips/dts/bcm6318-comtrend-ar-5315u.dts
index 35c74fd3ac..a5ae435a3a 100644
--- a/target/linux/bmips/dts/bcm6318-comtrend-ar-5315u.dts
+++ b/target/linux/bmips/dts/bcm6318-comtrend-ar-5315u.dts
@@ -37,6 +37,12 @@
status = "okay";
};
+&ethernet {
+ status = "okay";
+
+ mtd-mac-address = <&cfe 0x6a0>;
+};
+
&hsspi {
status = "okay";
@@ -168,6 +174,38 @@
};
};
+&switch0 {
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+
+ phy-handle = <&phy1>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+
+ phy-handle = <&phy2>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+
+ phy-handle = <&phy3>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+
+ phy-handle = <&phy4>;
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
diff --git a/target/linux/bmips/dts/bcm6318.dtsi b/target/linux/bmips/dts/bcm6318.dtsi
index f5cfd77438..e7dc38e937 100644
--- a/target/linux/bmips/dts/bcm6318.dtsi
+++ b/target/linux/bmips/dts/bcm6318.dtsi
@@ -346,5 +346,103 @@
status = "disabled";
};
+
+ switch0: switch@10080000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6328-switch";
+ reg = <0x10080000 0x8000>;
+ big-endian;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@8 {
+ reg = <8>;
+ label = "cpu";
+
+ phy-mode = "internal";
+ ethernet = <&ethernet>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ mdio: mdio@100800b0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6368-mdio-mux";
+ reg = <0x100800b0 0x8>;
+
+ mdio_int: mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+
+ phy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+
+ phy4: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ };
+ };
+
+ mdio_ext: mdio@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+
+ ethernet: ethernet@10088000 {
+ compatible = "brcm,bcm6318-enetsw";
+ reg = <0x10088000 0x80>,
+ <0x10088200 0x80>,
+ <0x10088400 0x80>;
+ reg-names = "dma",
+ "dma-channels",
+ "dma-sram";
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <BCM6318_IRQ_ENETSW_RX_DMA0>,
+ <BCM6318_IRQ_ENETSW_TX_DMA0>;
+ interrupt-names = "rx",
+ "tx";
+
+ clocks = <&periph_clk BCM6318_CLK_ROBOSW250>,
+ <&periph_clk BCM6318_CLK_ROBOSW025>,
+ <&ubus_clk BCM6318_UCLK_ROBOSW>;
+
+ resets = <&periph_rst BCM6318_RST_ENETSW>,
+ <&periph_rst BCM6318_RST_EPHY>;
+
+ power-domains = <&periph_pwr BCM6318_POWER_DOMAIN_EPHY0>,
+ <&periph_pwr BCM6318_POWER_DOMAIN_EPHY1>,
+ <&periph_pwr BCM6318_POWER_DOMAIN_EPHY2>,
+ <&periph_pwr BCM6318_POWER_DOMAIN_EPHY3>;
+
+ dma-rx = <0>;
+ dma-tx = <1>;
+
+ status = "disabled";
+ };
};
};
diff --git a/target/linux/bmips/dts/bcm63268.dtsi b/target/linux/bmips/dts/bcm63268.dtsi
index bf9998a552..284d2c8ef0 100644
--- a/target/linux/bmips/dts/bcm63268.dtsi
+++ b/target/linux/bmips/dts/bcm63268.dtsi
@@ -432,5 +432,105 @@
status = "disabled";
};
+
+ ethernet: ethernet@1000d800 {
+ compatible = "brcm,bcm63268-enetsw";
+ reg = <0x1000d800 0x80>,
+ <0x1000da00 0x80>,
+ <0x1000dc00 0x80>;
+ reg-names = "dma",
+ "dma-channels",
+ "dma-sram";
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <BCM63268_IRQ_ENETSW_RX_DMA0>,
+ <BCM63268_IRQ_ENETSW_TX_DMA0>;
+ interrupt-names = "rx",
+ "tx";
+
+ clocks = <&periph_clk BCM63268_CLK_GMAC>,
+ <&periph_clk BCM63268_CLK_ROBOSW>,
+ <&periph_clk BCM63268_CLK_ROBOSW250>,
+ <&timer_clk BCM63268_TCLK_EPHY1>,
+ <&timer_clk BCM63268_TCLK_EPHY2>,
+ <&timer_clk BCM63268_TCLK_EPHY3>,
+ <&timer_clk BCM63268_TCLK_GPHY1>;
+
+ resets = <&periph_rst BCM63268_RST_ENETSW>,
+ <&periph_rst BCM63268_RST_EPHY>,
+ <&periph_rst BCM63268_RST_GPHY>;
+
+ power-domains = <&periph_pwr BCM63268_POWER_DOMAIN_ROBOSW>;
+
+ dma-rx = <0>;
+ dma-tx = <1>;
+
+ status = "disabled";
+ };
+
+ switch0: switch@10700000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6328-switch";
+ reg = <0x10700000 0x8000>;
+ big-endian;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@8 {
+ reg = <8>;
+ label = "cpu";
+
+ phy-mode = "internal";
+ ethernet = <&ethernet>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ mdio: mdio@107000b0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6368-mdio-mux";
+ reg = <0x107000b0 0x8>;
+
+ mdio_int: mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+
+ phy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+
+ phy4: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ };
+ };
+
+ mdio_ext: mdio@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
};
};
diff --git a/target/linux/bmips/dts/bcm6328-comtrend-ar-5387un.dts b/target/linux/bmips/dts/bcm6328-comtrend-ar-5387un.dts
index a3192dffa4..9ebd6c5c4d 100644
--- a/target/linux/bmips/dts/bcm6328-comtrend-ar-5387un.dts
+++ b/target/linux/bmips/dts/bcm6328-comtrend-ar-5387un.dts
@@ -30,6 +30,12 @@
status = "okay";
};
+&ethernet {
+ status = "okay";
+
+ mtd-mac-address = <&cfe 0x6a0>;
+};
+
&hsspi {
status = "okay";
@@ -113,6 +119,38 @@
};
};
+&switch0 {
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+
+ phy-handle = <&phy1>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+
+ phy-handle = <&phy2>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+
+ phy-handle = <&phy3>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+
+ phy-handle = <&phy4>;
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
diff --git a/target/linux/bmips/dts/bcm6328.dtsi b/target/linux/bmips/dts/bcm6328.dtsi
index aa90cc2a9b..64fd04142c 100644
--- a/target/linux/bmips/dts/bcm6328.dtsi
+++ b/target/linux/bmips/dts/bcm6328.dtsi
@@ -368,5 +368,99 @@
status = "disabled";
};
+
+ ethernet: ethernet@1000d800 {
+ compatible = "brcm,bcm6328-enetsw";
+ reg = <0x1000d800 0x80>,
+ <0x1000da00 0x80>,
+ <0x1000dc00 0x80>;
+ reg-names = "dma",
+ "dma-channels",
+ "dma-sram";
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <BCM6328_IRQ_ENETSW_RX_DMA0>,
+ <BCM6328_IRQ_ENETSW_TX_DMA0>;
+ interrupt-names = "rx",
+ "tx";
+
+ clocks = <&periph_clk BCM6328_CLK_ROBOSW>;
+
+ resets = <&periph_rst BCM6328_RST_ENETSW>,
+ <&periph_rst BCM6328_RST_EPHY>;
+
+ power-domains = <&periph_pwr BCM6328_POWER_DOMAIN_ROBOSW>,
+ <&periph_pwr BCM6328_POWER_DOMAIN_EPHY>;
+
+ dma-rx = <0>;
+ dma-tx = <1>;
+
+ status = "disabled";
+ };
+
+ switch0: switch@10e00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6328-switch";
+ reg = <0x10e00000 0x8000>;
+ big-endian;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@8 {
+ reg = <8>;
+ label = "cpu";
+
+ phy-mode = "internal";
+ ethernet = <&ethernet>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ mdio: mdio@10e000b0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6368-mdio-mux";
+ reg = <0x10e000b0 0x8>;
+
+ mdio_int: mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+
+ phy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+
+ phy4: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ };
+ };
+
+ mdio_ext: mdio@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
};
};
diff --git a/target/linux/bmips/dts/bcm6362-netgear-dgnd3700-v2.dts b/target/linux/bmips/dts/bcm6362-netgear-dgnd3700-v2.dts
index 4da673cafa..fe26ebeed0 100644
--- a/target/linux/bmips/dts/bcm6362-netgear-dgnd3700-v2.dts
+++ b/target/linux/bmips/dts/bcm6362-netgear-dgnd3700-v2.dts
@@ -62,6 +62,12 @@
status = "okay";
};
+&ethernet {
+ status = "okay";
+
+ mtd-mac-address = <&cferom 0x6a0>;
+};
+
&leds {
status = "okay";
diff --git a/target/linux/bmips/dts/bcm6362.dtsi b/target/linux/bmips/dts/bcm6362.dtsi
index f46074045c..9a3d9c1f66 100644
--- a/target/linux/bmips/dts/bcm6362.dtsi
+++ b/target/linux/bmips/dts/bcm6362.dtsi
@@ -465,5 +465,99 @@
status = "disabled";
};
+
+ ethernet: ethernet@1000d800 {
+ compatible = "brcm,bcm6362-enetsw";
+ reg = <0x1000d800 0x80>,
+ <0x1000da00 0x80>,
+ <0x1000dc00 0x80>;
+ reg-names = "dma",
+ "dma-channels",
+ "dma-sram";
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <BCM6362_IRQ_ENETSW_RX_DMA0>;
+ interrupt-names = "rx";
+
+ clocks = <&periph_clk BCM6362_CLK_SWPKT_USB>,
+ <&periph_clk BCM6362_CLK_SWPKT_SAR>,
+ <&periph_clk BCM6362_CLK_ROBOSW>;
+
+ resets = <&periph_rst BCM6362_RST_ENETSW>,
+ <&periph_rst BCM6362_RST_EPHY>;
+
+ power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_ROBOSW>,
+ <&periph_pwr BCM6362_POWER_DOMAIN_GMII_PADS>;
+
+ dma-rx = <0>;
+ dma-tx = <1>;
+
+ status = "disabled";
+ };
+
+ switch0: switch@10e00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6328-switch";
+ reg = <0x10e00000 0x8000>;
+ big-endian;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@8 {
+ reg = <8>;
+ label = "cpu";
+
+ phy-mode = "internal";
+ ethernet = <&ethernet>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ mdio: mdio@10e000b0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6368-mdio-mux";
+ reg = <0x10e000b0 0x8>;
+
+ mdio_int: mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+
+ phy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+
+ phy4: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ };
+ };
+
+ mdio_ext: mdio@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
};
};
diff --git a/target/linux/bmips/dts/bcm6368-comtrend-vr-3025u.dts b/target/linux/bmips/dts/bcm6368-comtrend-vr-3025u.dts
index 683b01875e..b597a05f3a 100644
--- a/target/linux/bmips/dts/bcm6368-comtrend-vr-3025u.dts
+++ b/target/linux/bmips/dts/bcm6368-comtrend-vr-3025u.dts
@@ -59,6 +59,12 @@
status = "okay";
};
+&ethernet {
+ status = "okay";
+
+ mtd-mac-address = <&cfe 0x6a0>;
+};
+
&ohci {
status = "okay";
};
@@ -96,6 +102,38 @@
&pinctrl_ephy2_led &pinctrl_ephy3_led>;
};
+&switch0 {
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+
+ phy-handle = <&phy1>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+
+ phy-handle = <&phy2>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+
+ phy-handle = <&phy3>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+
+ phy-handle = <&phy4>;
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
diff --git a/target/linux/bmips/dts/bcm6368.dtsi b/target/linux/bmips/dts/bcm6368.dtsi
index 5aa2b82221..5b5064b29e 100644
--- a/target/linux/bmips/dts/bcm6368.dtsi
+++ b/target/linux/bmips/dts/bcm6368.dtsi
@@ -467,6 +467,99 @@
resets = <&periph_rst BCM6368_RST_IPSEC>;
};
+
+ ethernet: ethernet@10006800 {
+ compatible = "brcm,bcm6368-enetsw";
+ reg = <0x10006800 0x80>,
+ <0x10006a00 0x80>,
+ <0x10006c00 0x80>;
+ reg-names = "dma",
+ "dma-channels",
+ "dma-sram";
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <BCM6368_IRQ_ENETSW_RX_DMA0>,
+ <BCM6368_IRQ_ENETSW_TX_DMA0>;
+ interrupt-names = "rx",
+ "tx";
+
+ clocks = <&periph_clk BCM6368_CLK_SWPKT_USB>,
+ <&periph_clk BCM6368_CLK_SWPKT_SAR>,
+ <&periph_clk BCM6368_CLK_ROBOSW>;
+
+ resets = <&periph_rst BCM6368_RST_SWITCH>,
+ <&periph_rst BCM6368_RST_EPHY>;
+
+ dma-rx = <0>;
+ dma-tx = <1>;
+
+ status = "disabled";
+ };
+
+ switch0: switch@10f00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6328-switch";
+ reg = <0x10f00000 0x8000>;
+ big-endian;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@8 {
+ reg = <8>;
+ label = "cpu";
+
+ phy-mode = "internal";
+ ethernet = <&ethernet>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ mdio: mdio@10f000b0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6368-mdio-mux";
+ reg = <0x10f000b0 0x8>;
+
+ mdio_int: mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+
+ phy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+
+ phy4: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ };
+ };
+
+ mdio_ext: mdio@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
};
pflash: nor@18000000 {
diff --git a/target/linux/bmips/files/drivers/net/ethernet/broadcom/bcm6368-enetsw.c b/target/linux/bmips/files/drivers/net/ethernet/broadcom/bcm6368-enetsw.c
new file mode 100644
index 0000000000..dc55e3ccb9
--- /dev/null
+++ b/target/linux/bmips/files/drivers/net/ethernet/broadcom/bcm6368-enetsw.c
@@ -0,0 +1,1116 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * BCM6368 Ethernet Switch Controller Driver
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2015 Jonas Gorski <jonas.gorski@gmail.com>
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/interrupt.h>
+#include <linux/of_clk.h>
+#include <linux/of_net.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+/* MTU */
+#define ENETSW_TAG_SIZE 6
+#define ENETSW_MTU_OVERHEAD (VLAN_ETH_HLEN + VLAN_HLEN + \
+ ENETSW_TAG_SIZE)
+
+/* default number of descriptor */
+#define ENETSW_DEF_RX_DESC 64
+#define ENETSW_DEF_TX_DESC 32
+#define ENETSW_DEF_CPY_BREAK 128
+
+/* maximum burst len for dma (4 bytes unit) */
+#define ENETSW_DMA_MAXBURST 8
+
+/* DMA channels */
+#define DMA_CHAN_WIDTH 0x10
+
+/* Controller Configuration Register */
+#define DMA_CFG_REG (0x0)
+#define DMA_CFG_EN_SHIFT 0
+#define DMA_CFG_EN_MASK (1 << DMA_CFG_EN_SHIFT)
+#define DMA_CFG_FLOWCH_MASK(x) (1 << ((x >> 1) + 1))
+
+/* Flow Control Descriptor Low Threshold register */
+#define DMA_FLOWCL_REG(x) (0x4 + (x) * 6)
+
+/* Flow Control Descriptor High Threshold register */
+#define DMA_FLOWCH_REG(x) (0x8 + (x) * 6)
+
+/* Flow Control Descriptor Buffer Alloca Threshold register */
+#define DMA_BUFALLOC_REG(x) (0xc + (x) * 6)
+#define DMA_BUFALLOC_FORCE_SHIFT 31
+#define DMA_BUFALLOC_FORCE_MASK (1 << DMA_BUFALLOC_FORCE_SHIFT)
+
+/* Channel Configuration register */
+#define DMAC_CHANCFG_REG (0x0)
+#define DMAC_CHANCFG_EN_SHIFT 0
+#define DMAC_CHANCFG_EN_MASK (1 << DMAC_CHANCFG_EN_SHIFT)
+#define DMAC_CHANCFG_PKTHALT_SHIFT 1
+#define DMAC_CHANCFG_PKTHALT_MASK (1 << DMAC_CHANCFG_PKTHALT_SHIFT)
+#define DMAC_CHANCFG_BUFHALT_SHIFT 2
+#define DMAC_CHANCFG_BUFHALT_MASK (1 << DMAC_CHANCFG_BUFHALT_SHIFT)
+#define DMAC_CHANCFG_CHAINING_SHIFT 2
+#define DMAC_CHANCFG_CHAINING_MASK (1 << DMAC_CHANCFG_CHAINING_SHIFT)
+#define DMAC_CHANCFG_WRAP_EN_SHIFT 3
+#define DMAC_CHANCFG_WRAP_EN_MASK (1 << DMAC_CHANCFG_WRAP_EN_SHIFT)
+#define DMAC_CHANCFG_FLOWC_EN_SHIFT 4
+#define DMAC_CHANCFG_FLOWC_EN_MASK (1 << DMAC_CHANCFG_FLOWC_EN_SHIFT)
+
+/* Interrupt Control/Status register */
+#define DMAC_IR_REG (0x4)
+#define DMAC_IR_BUFDONE_MASK (1 << 0)
+#define DMAC_IR_PKTDONE_MASK (1 << 1)
+#define DMAC_IR_NOTOWNER_MASK (1 << 2)
+
+/* Interrupt Mask register */
+#define DMAC_IRMASK_REG (0x8)
+
+/* Maximum Burst Length */
+#define DMAC_MAXBURST_REG (0xc)
+
+/* Ring Start Address register */
+#define DMAS_RSTART_REG (0x0)
+
+/* State Ram Word 2 */
+#define DMAS_SRAM2_REG (0x4)
+
+/* State Ram Word 3 */
+#define DMAS_SRAM3_REG (0x8)
+
+/* State Ram Word 4 */
+#define DMAS_SRAM4_REG (0xc)
+
+struct bcm6368_enetsw_desc {
+ u32 len_stat;
+ u32 address;
+};
+
+/* control */
+#define DMADESC_LENGTH_SHIFT 16
+#define DMADESC_LENGTH_MASK (0xfff << DMADESC_LENGTH_SHIFT)
+#define DMADESC_OWNER_MASK (1 << 15)
+#define DMADESC_EOP_MASK (1 << 14)
+#define DMADESC_SOP_MASK (1 << 13)
+#define DMADESC_ESOP_MASK (DMADESC_EOP_MASK | DMADESC_SOP_MASK)
+#define DMADESC_WRAP_MASK (1 << 12)
+#define DMADESC_USB_NOZERO_MASK (1 << 1)
+#define DMADESC_USB_ZERO_MASK (1 << 0)
+
+/* status */
+#define DMADESC_UNDER_MASK (1 << 9)
+#define DMADESC_APPEND_CRC (1 << 8)
+#define DMADESC_OVSIZE_MASK (1 << 4)
+#define DMADESC_RXER_MASK (1 << 2)
+#define DMADESC_CRC_MASK (1 << 1)
+#define DMADESC_OV_MASK (1 << 0)
+#define DMADESC_ERR_MASK (DMADESC_UNDER_MASK | \
+ DMADESC_OVSIZE_MASK | \
+ DMADESC_RXER_MASK | \
+ DMADESC_CRC_MASK | \
+ DMADESC_OV_MASK)
+
+struct bcm6368_enetsw {
+ void __iomem *dma_base;
+ void __iomem *dma_chan;
+ void __iomem *dma_sram;
+
+ struct device **pm;
+ struct device_link **link_pm;
+ int num_pms;
+
+ struct clk **clock;
+ unsigned int num_clocks;
+
+ struct reset_control **reset;
+ unsigned int num_resets;
+
+ int copybreak;
+
+ int irq_rx;
+ int irq_tx;
+
+ /* hw view of rx & tx dma ring */
+ dma_addr_t rx_desc_dma;
+ dma_addr_t tx_desc_dma;
+
+ /* allocated size (in bytes) for rx & tx dma ring */
+ unsigned int rx_desc_alloc_size;
+ unsigned int tx_desc_alloc_size;
+
+ struct napi_struct napi;
+
+ /* dma channel id for rx */
+ int rx_chan;
+
+ /* number of dma desc in rx ring */
+ int rx_ring_size;
+
+ /* cpu view of rx dma ring */
+ struct bcm6368_enetsw_desc *rx_desc_cpu;
+
+ /* current number of armed descriptor given to hardware for rx */
+ int rx_desc_count;
+
+ /* next rx descriptor to fetch from hardware */
+ int rx_curr_desc;
+
+ /* next dirty rx descriptor to refill */
+ int rx_dirty_desc;
+
+ /* size of allocated rx skbs */
+ unsigned int rx_skb_size;
+
+ /* list of skb given to hw for rx */
+ struct sk_buff **rx_skb;
+
+ /* used when rx skb allocation failed, so we defer rx queue
+ * refill */
+ struct timer_list rx_timeout;
+
+ /* lock rx_timeout against rx normal operation */
+ spinlock_t rx_lock;
+
+ /* dma channel id for tx */
+ int tx_chan;
+
+ /* number of dma desc in tx ring */
+ int tx_ring_size;
+
+ /* maximum dma burst size */
+ int dma_maxburst;
+
+ /* cpu view of rx dma ring */
+ struct bcm6368_enetsw_desc *tx_desc_cpu;
+
+ /* number of available descriptor for tx */
+ int tx_desc_count;
+
+ /* next tx descriptor avaiable */
+ int tx_curr_desc;
+
+ /* next dirty tx descriptor to reclaim */
+ int tx_dirty_desc;
+
+ /* list of skb given to hw for tx */
+ struct sk_buff **tx_skb;
+
+ /* lock used by tx reclaim and xmit */
+ spinlock_t tx_lock;
+
+ /* network device reference */
+ struct net_device *net_dev;
+
+ /* platform device reference */
+ struct platform_device *pdev;
+
+ /* dma channel enable mask */
+ u32 dma_chan_en_mask;
+
+ /* dma channel interrupt mask */
+ u32 dma_chan_int_mask;
+
+ /* dma channel width */
+ unsigned int dma_chan_width;
+
+ /* dma descriptor shift value */
+ unsigned int dma_desc_shift;
+};
+
+static inline void dma_writel(struct bcm6368_enetsw *priv, u32 val, u32 off)
+{
+ __raw_writel(val, priv->dma_base + off);
+}
+
+static inline u32 dma_readl(struct bcm6368_enetsw *priv, u32 off, int chan)
+{
+ return __raw_readl(priv->dma_chan + off + chan * priv->dma_chan_width);
+}
+
+static inline void dmac_writel(struct bcm6368_enetsw *priv, u32 val,
+ u32 off, int chan)
+{
+ __raw_writel(val, priv->dma_chan + off + chan * priv->dma_chan_width);
+}
+
+static inline void dmas_writel(struct bcm6368_enetsw *priv, u32 val,
+ u32 off, int chan)
+{
+ __raw_writel(val, priv->dma_sram + off + chan * priv->dma_chan_width);
+}
+
+/*
+ * refill rx queue
+ */
+static int bcm6368_enetsw_refill_rx(struct net_device *dev)
+{
+ struct bcm6368_enetsw *priv;
+
+ priv = netdev_priv(dev);
+
+ while (priv->rx_desc_count < priv->rx_ring_size) {
+ struct bcm6368_enetsw_desc *desc;
+ struct sk_buff *skb;
+ dma_addr_t p;
+ int desc_idx;
+ u32 len_stat;
+
+ desc_idx = priv->rx_dirty_desc;
+ desc = &priv->rx_desc_cpu[desc_idx];
+
+ if (!priv->rx_skb[desc_idx]) {
+ skb = netdev_alloc_skb(dev, priv->rx_skb_size);
+ if (!skb)
+ break;
+ priv->rx_skb[desc_idx] = skb;
+ p = dma_map_single(&priv->pdev->dev, skb->data,
+ priv->rx_skb_size,
+ DMA_FROM_DEVICE);
+ desc->address = p;
+ }
+
+ len_stat = priv->rx_skb_size << DMADESC_LENGTH_SHIFT;
+ len_stat |= DMADESC_OWNER_MASK;
+ if (priv->rx_dirty_desc == priv->rx_ring_size - 1) {
+ len_stat |= (DMADESC_WRAP_MASK >>
+ priv->dma_desc_shift);
+ priv->rx_dirty_desc = 0;
+ } else {
+ priv->rx_dirty_desc++;
+ }
+ wmb();
+ desc->len_stat = len_stat;
+
+ priv->rx_desc_count++;
+
+ /* tell dma engine we allocated one buffer */
+ dma_writel(priv, 1, DMA_BUFALLOC_REG(priv->rx_chan));
+ }
+
+ /* If rx ring is still empty, set a timer to try allocating
+ * again at a later time. */
+ if (priv->rx_desc_count == 0 && netif_running(dev)) {
+ dev_warn(&priv->pdev->dev, "unable to refill rx ring\n");
+ priv->rx_timeout.expires = jiffies + HZ;
+ add_timer(&priv->rx_timeout);
+ }
+
+ return 0;
+}
+
+/*
+ * timer callback to defer refill rx queue in case we're OOM
+ */
+static void bcm6368_enetsw_refill_rx_timer(struct timer_list *t)
+{
+ struct bcm6368_enetsw *priv = from_timer(priv, t, rx_timeout);
+ struct net_device *dev = priv->net_dev;
+
+ spin_lock(&priv->rx_lock);
+ bcm6368_enetsw_refill_rx(dev);
+ spin_unlock(&priv->rx_lock);
+}
+
+/*
+ * extract packet from rx queue
+ */
+static int bcm6368_enetsw_receive_queue(struct net_device *dev, int budget)
+{
+ struct bcm6368_enetsw *priv;
+ struct device *kdev;
+ int processed;
+
+ priv = netdev_priv(dev);
+ kdev = &priv->pdev->dev;
+ processed = 0;
+
+ /* don't scan ring further than number of refilled
+ * descriptor */
+ if (budget > priv->rx_desc_count)
+ budget = priv->rx_desc_count;
+
+ do {
+ struct bcm6368_enetsw_desc *desc;
+ struct sk_buff *skb;
+ int desc_idx;
+ u32 len_stat;
+ unsigned int len;
+
+ desc_idx = priv->rx_curr_desc;
+ desc = &priv->rx_desc_cpu[desc_idx];
+
+ /* make sure we actually read the descriptor status at
+ * each loop */
+ rmb();
+
+ len_stat = desc->len_stat;
+
+ /* break if dma ownership belongs to hw */
+ if (len_stat & DMADESC_OWNER_MASK)
+ break;
+
+ processed++;
+ priv->rx_curr_desc++;
+ if (priv->rx_curr_desc == priv->rx_ring_size)
+ priv->rx_curr_desc = 0;
+ priv->rx_desc_count--;
+
+ /* if the packet does not have start of packet _and_
+ * end of packet flag set, then just recycle it */
+ if ((len_stat & (DMADESC_ESOP_MASK >> priv->dma_desc_shift))
+ != (DMADESC_ESOP_MASK >> priv->dma_desc_shift)) {
+ dev->stats.rx_dropped++;
+ continue;
+ }
+
+ /* valid packet */
+ skb = priv->rx_skb[desc_idx];
+ len = (len_stat & DMADESC_LENGTH_MASK)
+ >> DMADESC_LENGTH_SHIFT;
+ /* don't include FCS */
+ len -= 4;
+
+ if (len < priv->copybreak) {
+ struct sk_buff *nskb;
+
+ nskb = napi_alloc_skb(&priv->napi, len);
+ if (!nskb) {
+ /* forget packet, just rearm desc */
+ dev->stats.rx_dropped++;
+ continue;
+ }
+
+ dma_sync_single_for_cpu(kdev, desc->address,
+ len, DMA_FROM_DEVICE);
+ memcpy(nskb->data, skb->data, len);
+ dma_sync_single_for_device(kdev, desc->address,
+ len, DMA_FROM_DEVICE);
+ skb = nskb;
+ } else {
+ dma_unmap_single(&priv->pdev->dev, desc->address,
+ priv->rx_skb_size, DMA_FROM_DEVICE);
+ priv->rx_skb[desc_idx] = NULL;
+ }
+
+ skb_put(skb, len);
+ skb->protocol = eth_type_trans(skb, dev);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += len;
+ netif_receive_skb(skb);
+ } while (--budget > 0);
+
+ if (processed || !priv->rx_desc_count) {
+ bcm6368_enetsw_refill_rx(dev);
+
+ /* kick rx dma */
+ dmac_writel(priv, priv->dma_chan_en_mask,
+ DMAC_CHANCFG_REG, priv->rx_chan);
+ }
+
+ return processed;
+}
+
+/*
+ * try to or force reclaim of transmitted buffers
+ */
+static int bcm6368_enetsw_tx_reclaim(struct net_device *dev, int force)
+{
+ struct bcm6368_enetsw *priv;
+ int released;
+
+ priv = netdev_priv(dev);
+ released = 0;
+
+ while (priv->tx_desc_count < priv->tx_ring_size) {
+ struct bcm6368_enetsw_desc *desc;
+ struct sk_buff *skb;
+
+ /* We run in a bh and fight against start_xmit, which
+ * is called with bh disabled */
+ spin_lock(&priv->tx_lock);
+
+ desc = &priv->tx_desc_cpu[priv->tx_dirty_desc];
+
+ if (!force && (desc->len_stat & DMADESC_OWNER_MASK)) {
+ spin_unlock(&priv->tx_lock);
+ break;
+ }
+
+ /* ensure other field of the descriptor were not read
+ * before we checked ownership */
+ rmb();
+
+ skb = priv->tx_skb[priv->tx_dirty_desc];
+ priv->tx_skb[priv->tx_dirty_desc] = NULL;
+ dma_unmap_single(&priv->pdev->dev, desc->address, skb->len,
+ DMA_TO_DEVICE);
+
+ priv->tx_dirty_desc++;
+ if (priv->tx_dirty_desc == priv->tx_ring_size)
+ priv->tx_dirty_desc = 0;
+ priv->tx_desc_count++;
+
+ spin_unlock(&priv->tx_lock);
+
+ if (desc->len_stat & DMADESC_UNDER_MASK)
+ dev->stats.tx_errors++;
+
+ dev_kfree_skb(skb);
+ released++;
+ }
+
+ if (netif_queue_stopped(dev) && released)
+ netif_wake_queue(dev);
+
+ return released;
+}
+
+/*
+ * poll func, called by network core
+ */
+static int bcm6368_enetsw_poll(struct napi_struct *napi, int budget)
+{
+ struct bcm6368_enetsw *priv;
+ struct net_device *dev;
+ int rx_work_done;
+
+ priv = container_of(napi, struct bcm6368_enetsw, napi);
+ dev = priv->net_dev;
+
+ /* ack interrupts */
+ dmac_writel(priv, priv->dma_chan_int_mask,
+ DMAC_IR_REG, priv->rx_chan);
+ dmac_writel(priv, priv->dma_chan_int_mask,
+ DMAC_IR_REG, priv->tx_chan);
+
+ /* reclaim sent skb */
+ bcm6368_enetsw_tx_reclaim(dev, 0);
+
+ spin_lock(&priv->rx_lock);
+ rx_work_done = bcm6368_enetsw_receive_queue(dev, budget);
+ spin_unlock(&priv->rx_lock);
+
+ if (rx_work_done >= budget) {
+ /* rx queue is not yet empty/clean */
+ return rx_work_done;
+ }
+
+ /* no more packet in rx/tx queue, remove device from poll
+ * queue */
+ napi_complete_done(napi, rx_work_done);
+
+ /* restore rx/tx interrupt */
+ dmac_writel(priv, priv->dma_chan_int_mask,
+ DMAC_IRMASK_REG, priv->rx_chan);
+ dmac_writel(priv, priv->dma_chan_int_mask,
+ DMAC_IRMASK_REG, priv->tx_chan);
+
+ return rx_work_done;
+}
+
+/*
+ * rx/tx dma interrupt handler
+ */
+static irqreturn_t bcm6368_enetsw_isr_dma(int irq, void *dev_id)
+{
+ struct net_device *dev;
+ struct bcm6368_enetsw *priv;
+
+ dev = dev_id;
+ priv = netdev_priv(dev);
+
+ /* mask rx/tx interrupts */
+ dmac_writel(priv, 0, DMAC_IRMASK_REG, priv->rx_chan);
+ dmac_writel(priv, 0, DMAC_IRMASK_REG, priv->tx_chan);
+
+ napi_schedule(&priv->napi);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * tx request callback
+ */
+static netdev_tx_t
+bcm6368_enetsw_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct bcm6368_enetsw *priv;
+ struct bcm6368_enetsw_desc *desc;
+ u32 len_stat;
+ netdev_tx_t ret;
+
+ priv = netdev_priv(dev);
+
+ /* lock against tx reclaim */
+ spin_lock(&priv->tx_lock);
+
+ /* make sure the tx hw queue is not full, should not happen
+ * since we stop queue before it's the case */
+ if (unlikely(!priv->tx_desc_count)) {
+ netif_stop_queue(dev);
+ dev_err(&priv->pdev->dev, "xmit called with no tx desc "
+ "available?\n");
+ ret = NETDEV_TX_BUSY;
+ goto out_unlock;
+ }
+
+ /* pad small packets */
+ if (skb->len < 64) {
+ int needed = 64 - skb->len;
+ char *data;
+
+ if (unlikely(skb_tailroom(skb) < needed)) {
+ struct sk_buff *nskb;
+
+ nskb = skb_copy_expand(skb, 0, needed, GFP_ATOMIC);
+ if (!nskb) {
+ ret = NETDEV_TX_BUSY;
+ goto out_unlock;
+ }
+ dev_kfree_skb(skb);
+ skb = nskb;
+ }
+ data = skb_put_zero(skb, needed);
+ }
+
+ /* point to the next available desc */
+ desc = &priv->tx_desc_cpu[priv->tx_curr_desc];
+ priv->tx_skb[priv->tx_curr_desc] = skb;
+
+ /* fill descriptor */
+ desc->address = dma_map_single(&priv->pdev->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
+
+ len_stat = (skb->len << DMADESC_LENGTH_SHIFT) & DMADESC_LENGTH_MASK;
+ len_stat |= (DMADESC_ESOP_MASK >> priv->dma_desc_shift) |
+ DMADESC_APPEND_CRC | DMADESC_OWNER_MASK;
+
+ priv->tx_curr_desc++;
+ if (priv->tx_curr_desc == priv->tx_ring_size) {
+ priv->tx_curr_desc = 0;
+ len_stat |= (DMADESC_WRAP_MASK >> priv->dma_desc_shift);
+ }
+ priv->tx_desc_count--;
+
+ /* dma might be already polling, make sure we update desc
+ * fields in correct order */
+ wmb();
+ desc->len_stat = len_stat;
+ wmb();
+
+ /* kick tx dma */
+ dmac_writel(priv, priv->dma_chan_en_mask, DMAC_CHANCFG_REG,
+ priv->tx_chan);
+
+ /* stop queue if no more desc available */
+ if (!priv->tx_desc_count)
+ netif_stop_queue(dev);
+
+ dev->stats.tx_bytes += skb->len;
+ dev->stats.tx_packets++;
+ ret = NETDEV_TX_OK;
+
+out_unlock:
+ spin_unlock(&priv->tx_lock);
+ return ret;
+}
+
+/*
+ * disable dma in given channel
+ */
+static void bcm6368_enetsw_disable_dma(struct bcm6368_enetsw *priv, int chan)
+{
+ int limit;
+
+ dmac_writel(priv, 0, DMAC_CHANCFG_REG, chan);
+
+ limit = 1000;
+ do {
+ u32 val;
+
+ val = dma_readl(priv, DMAC_CHANCFG_REG, chan);
+ if (!(val & DMAC_CHANCFG_EN_MASK))
+ break;
+ udelay(1);
+ } while (limit--);
+}
+
+static int bcm6368_enetsw_open(struct net_device *dev)
+{
+ struct bcm6368_enetsw *priv;
+ struct device *kdev;
+ int i, ret;
+ unsigned int size;
+ void *p;
+ u32 val;
+
+ priv = netdev_priv(dev);
+ kdev = &priv->pdev->dev;
+
+ /* mask all interrupts and request them */
+ dmac_writel(priv, 0, DMAC_IRMASK_REG, priv->rx_chan);
+ dmac_writel(priv, 0, DMAC_IRMASK_REG, priv->tx_chan);
+
+ ret = request_irq(priv->irq_rx, bcm6368_enetsw_isr_dma,
+ 0, dev->name, dev);
+ if (ret)
+ goto out_freeirq;
+
+ if (priv->irq_tx != -1) {
+ ret = request_irq(priv->irq_tx, bcm6368_enetsw_isr_dma,
+ 0, dev->name, dev);
+ if (ret)
+ goto out_freeirq_rx;
+ }
+
+ /* allocate rx dma ring */
+ size = priv->rx_ring_size * sizeof(struct bcm6368_enetsw_desc);
+ p = dma_alloc_coherent(kdev, size, &priv->rx_desc_dma, GFP_KERNEL);
+ if (!p) {
+ dev_err(kdev, "cannot allocate rx ring %u\n", size);
+ ret = -ENOMEM;
+ goto out_freeirq_tx;
+ }
+
+ memset(p, 0, size);
+ priv->rx_desc_alloc_size = size;
+ priv->rx_desc_cpu = p;
+
+ /* allocate tx dma ring */
+ size = priv->tx_ring_size * sizeof(struct bcm6368_enetsw_desc);
+ p = dma_alloc_coherent(kdev, size, &priv->tx_desc_dma, GFP_KERNEL);
+ if (!p) {
+ dev_err(kdev, "cannot allocate tx ring\n");
+ ret = -ENOMEM;
+ goto out_free_rx_ring;
+ }
+
+ memset(p, 0, size);
+ priv->tx_desc_alloc_size = size;
+ priv->tx_desc_cpu = p;
+
+ priv->tx_skb = kzalloc(sizeof(struct sk_buff *) * priv->tx_ring_size,
+ GFP_KERNEL);
+ if (!priv->tx_skb) {
+ dev_err(kdev, "cannot allocate rx skb queue\n");
+ ret = -ENOMEM;
+ goto out_free_tx_ring;
+ }
+
+ priv->tx_desc_count = priv->tx_ring_size;
+ priv->tx_dirty_desc = 0;
+ priv->tx_curr_desc = 0;
+ spin_lock_init(&priv->tx_lock);
+
+ /* init & fill rx ring with skbs */
+ priv->rx_skb = kzalloc(sizeof(struct sk_buff *) * priv->rx_ring_size,
+ GFP_KERNEL);
+ if (!priv->rx_skb) {
+ dev_err(kdev, "cannot allocate rx skb queue\n");
+ ret = -ENOMEM;
+ goto out_free_tx_skb;
+ }
+
+ priv->rx_desc_count = 0;
+ priv->rx_dirty_desc = 0;
+ priv->rx_curr_desc = 0;
+
+ /* initialize flow control buffer allocation */
+ dma_writel(priv, DMA_BUFALLOC_FORCE_MASK | 0,
+ DMA_BUFALLOC_REG(priv->rx_chan));
+
+ if (bcm6368_enetsw_refill_rx(dev)) {
+ dev_err(kdev, "cannot allocate rx skb queue\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* write rx & tx ring addresses */
+ dmas_writel(priv, priv->rx_desc_dma,
+ DMAS_RSTART_REG, priv->rx_chan);
+ dmas_writel(priv, priv->tx_desc_dma,
+ DMAS_RSTART_REG, priv->tx_chan);
+
+ /* clear remaining state ram for rx & tx channel */
+ dmas_writel(priv, 0, DMAS_SRAM2_REG, priv->rx_chan);
+ dmas_writel(priv, 0, DMAS_SRAM2_REG, priv->tx_chan);
+ dmas_writel(priv, 0, DMAS_SRAM3_REG, priv->rx_chan);
+ dmas_writel(priv, 0, DMAS_SRAM3_REG, priv->tx_chan);
+ dmas_writel(priv, 0, DMAS_SRAM4_REG, priv->rx_chan);
+ dmas_writel(priv, 0, DMAS_SRAM4_REG, priv->tx_chan);
+
+ /* set dma maximum burst len */
+ dmac_writel(priv, priv->dma_maxburst,
+ DMAC_MAXBURST_REG, priv->rx_chan);
+ dmac_writel(priv, priv->dma_maxburst,
+ DMAC_MAXBURST_REG, priv->tx_chan);
+
+ /* set flow control low/high threshold to 1/3 / 2/3 */
+ val = priv->rx_ring_size / 3;
+ dma_writel(priv, val, DMA_FLOWCL_REG(priv->rx_chan));
+ val = (priv->rx_ring_size * 2) / 3;
+ dma_writel(priv, val, DMA_FLOWCH_REG(priv->rx_chan));
+
+ /* all set, enable mac and interrupts, start dma engine and
+ * kick rx dma channel
+ */
+ wmb();
+ dma_writel(priv, DMA_CFG_EN_MASK, DMA_CFG_REG);
+ dmac_writel(priv, DMAC_CHANCFG_EN_MASK,
+ DMAC_CHANCFG_REG, priv->rx_chan);
+
+ /* watch "packet transferred" interrupt in rx and tx */
+ dmac_writel(priv, DMAC_IR_PKTDONE_MASK,
+ DMAC_IR_REG, priv->rx_chan);
+ dmac_writel(priv, DMAC_IR_PKTDONE_MASK,
+ DMAC_IR_REG, priv->tx_chan);
+
+ /* make sure we enable napi before rx interrupt */
+ napi_enable(&priv->napi);
+
+ dmac_writel(priv, DMAC_IR_PKTDONE_MASK,
+ DMAC_IRMASK_REG, priv->rx_chan);
+ dmac_writel(priv, DMAC_IR_PKTDONE_MASK,
+ DMAC_IRMASK_REG, priv->tx_chan);
+
+ netif_carrier_on(dev);
+ netif_start_queue(dev);
+
+ return 0;
+
+out:
+ for (i = 0; i < priv->rx_ring_size; i++) {
+ struct bcm6368_enetsw_desc *desc;
+
+ if (!priv->rx_skb[i])
+ continue;
+
+ desc = &priv->rx_desc_cpu[i];
+ dma_unmap_single(kdev, desc->address, priv->rx_skb_size,
+ DMA_FROM_DEVICE);
+ kfree_skb(priv->rx_skb[i]);
+ }
+ kfree(priv->rx_skb);
+
+out_free_tx_skb:
+ kfree(priv->tx_skb);
+
+out_free_tx_ring:
+ dma_free_coherent(kdev, priv->tx_desc_alloc_size,
+ priv->tx_desc_cpu, priv->tx_desc_dma);
+
+out_free_rx_ring:
+ dma_free_coherent(kdev, priv->rx_desc_alloc_size,
+ priv->rx_desc_cpu, priv->rx_desc_dma);
+
+out_freeirq_tx:
+ if (priv->irq_tx != -1)
+ free_irq(priv->irq_tx, dev);
+
+out_freeirq_rx:
+ free_irq(priv->irq_rx, dev);
+
+out_freeirq:
+ return ret;
+}
+
+static int bcm6368_enetsw_stop(struct net_device *dev)
+{
+ struct bcm6368_enetsw *priv;
+ struct device *kdev;
+ int i;
+
+ priv = netdev_priv(dev);
+ kdev = &priv->pdev->dev;
+
+ netif_stop_queue(dev);
+ napi_disable(&priv->napi);
+ del_timer_sync(&priv->rx_timeout);
+
+ /* mask all interrupts */
+ dmac_writel(priv, 0, DMAC_IRMASK_REG, priv->rx_chan);
+ dmac_writel(priv, 0, DMAC_IRMASK_REG, priv->tx_chan);
+
+ /* disable dma & mac */
+ bcm6368_enetsw_disable_dma(priv, priv->tx_chan);
+ bcm6368_enetsw_disable_dma(priv, priv->rx_chan);
+
+ /* force reclaim of all tx buffers */
+ bcm6368_enetsw_tx_reclaim(dev, 1);
+
+ /* free the rx skb ring */
+ for (i = 0; i < priv->rx_ring_size; i++) {
+ struct bcm6368_enetsw_desc *desc;
+
+ if (!priv->rx_skb[i])
+ continue;
+
+ desc = &priv->rx_desc_cpu[i];
+ dma_unmap_single_attrs(kdev, desc->address, priv->rx_skb_size,
+ DMA_FROM_DEVICE,
+ DMA_ATTR_SKIP_CPU_SYNC);
+ kfree_skb(priv->rx_skb[i]);
+ }
+
+ /* free remaining allocated memory */
+ kfree(priv->rx_skb);
+ kfree(priv->tx_skb);
+ dma_free_coherent(kdev, priv->rx_desc_alloc_size,
+ priv->rx_desc_cpu, priv->rx_desc_dma);
+ dma_free_coherent(kdev, priv->tx_desc_alloc_size,
+ priv->tx_desc_cpu, priv->tx_desc_dma);
+ if (priv->irq_tx != -1)
+ free_irq(priv->irq_tx, dev);
+ free_irq(priv->irq_rx, dev);
+
+ return 0;
+}
+
+static const struct net_device_ops bcm6368_enetsw_ops = {
+ .ndo_open = bcm6368_enetsw_open,
+ .ndo_stop = bcm6368_enetsw_stop,
+ .ndo_start_xmit = bcm6368_enetsw_start_xmit,
+};
+
+static int bcm6368_enetsw_probe(struct platform_device *pdev)
+{
+ struct bcm6368_enetsw *priv;
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct net_device *ndev;
+ struct resource *res;
+ const void *mac;
+ unsigned i;
+ int ret;
+
+ ndev = alloc_etherdev(sizeof(*priv));
+ if (!ndev)
+ return -ENOMEM;
+
+ priv = netdev_priv(ndev);
+
+ priv->num_pms = of_count_phandle_with_args(node, "power-domains",
+ "#power-domain-cells");
+ if (priv->num_pms > 1) {
+ priv->pm = devm_kcalloc(dev, priv->num_pms,
+ sizeof(struct device *), GFP_KERNEL);
+ if (!priv->pm)
+ return -ENOMEM;
+
+ priv->link_pm = devm_kcalloc(dev, priv->num_pms,
+ sizeof(struct device_link *),
+ GFP_KERNEL);
+ if (!priv->link_pm)
+ return -ENOMEM;
+
+ for (i = 0; i < priv->num_pms; i++) {
+ priv->pm[i] = genpd_dev_pm_attach_by_id(dev, i);
+ if (IS_ERR(priv->pm[i])) {
+ dev_err(dev, "error getting pm %d\n", i);
+ return -EINVAL;
+ }
+
+ priv->link_pm[i] = device_link_add(dev, priv->pm[i],
+ DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME |
+ DL_FLAG_RPM_ACTIVE);
+ }
+ }
+
+ pm_runtime_enable(dev);
+ pm_runtime_no_callbacks(dev);
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0) {
+ pm_runtime_disable(dev);
+ dev_info(dev, "PM prober defer: ret=%d\n", ret);
+ return -EPROBE_DEFER;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma");
+ priv->dma_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->dma_base))
+ return PTR_ERR(priv->dma_base);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "dma-channels");
+ priv->dma_chan = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->dma_chan))
+ return PTR_ERR(priv->dma_chan);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma-sram");
+ priv->dma_sram = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->dma_sram))
+ return PTR_ERR(priv->dma_sram);
+
+ priv->irq_rx = platform_get_irq_byname(pdev, "rx");
+ if (!priv->irq_rx)
+ return -ENODEV;
+
+ priv->irq_tx = platform_get_irq_byname(pdev, "tx");
+ if (!priv->irq_tx)
+ return -ENODEV;
+ else if (priv->irq_tx < 0)
+ priv->irq_tx = -1;
+
+ if (device_property_read_u32(dev, "dma-rx", &priv->rx_chan))
+ return -ENODEV;
+
+ if (device_property_read_u32(dev, "dma-tx", &priv->tx_chan))
+ return -ENODEV;
+
+ priv->rx_ring_size = ENETSW_DEF_RX_DESC;
+ priv->tx_ring_size = ENETSW_DEF_TX_DESC;
+
+ priv->dma_maxburst = ENETSW_DMA_MAXBURST;
+
+ priv->copybreak = ENETSW_DEF_CPY_BREAK;
+
+ priv->dma_chan_en_mask = DMAC_CHANCFG_EN_MASK;
+ priv->dma_chan_int_mask = DMAC_IR_PKTDONE_MASK;
+ priv->dma_chan_width = DMA_CHAN_WIDTH;
+
+ mac = of_get_mac_address(node);
+ if (!IS_ERR_OR_NULL(mac)) {
+ memcpy(ndev->dev_addr, mac, ETH_ALEN);
+ dev_info(dev, "mtd mac %pM\n", ndev->dev_addr);
+ } else {
+ random_ether_addr(ndev->dev_addr);
+ dev_info(dev, "random mac %pM\n", ndev->dev_addr);
+ }
+
+ priv->rx_skb_size = ALIGN(ndev->mtu + ENETSW_MTU_OVERHEAD,
+ priv->dma_maxburst * 4);
+
+ priv->num_clocks = of_clk_get_parent_count(node);
+ if (priv->num_clocks) {
+ priv->clock = devm_kcalloc(dev, priv->num_clocks,
+ sizeof(struct clk *), GFP_KERNEL);
+ if (!priv->clock)
+ return -ENOMEM;
+ }
+ for (i = 0; i < priv->num_clocks; i++) {
+ priv->clock[i] = of_clk_get(node, i);
+ if (IS_ERR(priv->clock[i])) {
+ dev_err(dev, "error getting clock %d\n", i);
+ return -EINVAL;
+ }
+
+ ret = clk_prepare_enable(priv->clock[i]);
+ if (ret) {
+ dev_err(dev, "error enabling clock %d\n", i);
+ return ret;
+ }
+ }
+
+ priv->num_resets = of_count_phandle_with_args(node, "resets",
+ "#reset-cells");
+ if (priv->num_resets) {
+ priv->reset = devm_kcalloc(dev, priv->num_resets,
+ sizeof(struct reset_control *),
+ GFP_KERNEL);
+ if (!priv->reset)
+ return -ENOMEM;
+ }
+ for (i = 0; i < priv->num_resets; i++) {
+ priv->reset[i] = devm_reset_control_get_by_index(dev, i);
+ if (IS_ERR(priv->reset[i])) {
+ dev_err(dev, "error getting reset %d\n", i);
+ return -EINVAL;
+ }
+
+ ret = reset_control_reset(priv->reset[i]);
+ if (ret) {
+ dev_err(dev, "error performing reset %d\n", i);
+ return ret;
+ }
+ }
+
+ spin_lock_init(&priv->rx_lock);
+
+ timer_setup(&priv->rx_timeout, bcm6368_enetsw_refill_rx_timer, 0);
+
+ /* register netdevice */
+ ndev->netdev_ops = &bcm6368_enetsw_ops;
+ ndev->min_mtu = ETH_ZLEN;
+ ndev->mtu = ETH_DATA_LEN + ENETSW_TAG_SIZE;
+ ndev->max_mtu = ETH_DATA_LEN + ENETSW_TAG_SIZE;
+ netif_napi_add(ndev, &priv->napi, bcm6368_enetsw_poll, 16);
+ SET_NETDEV_DEV(ndev, dev);
+
+ ret = register_netdev(ndev);
+ if (ret)
+ goto out_disable_clk;
+
+ netif_carrier_off(ndev);
+ platform_set_drvdata(pdev, ndev);
+ priv->pdev = pdev;
+ priv->net_dev = ndev;
+
+ return 0;
+
+out_disable_clk:
+ for (i = 0; i < priv->num_resets; i++)
+ reset_control_assert(priv->reset[i]);
+
+ for (i = 0; i < priv->num_clocks; i++)
+ clk_disable_unprepare(priv->clock[i]);
+
+ return ret;
+}
+
+static int bcm6368_enetsw_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct bcm6368_enetsw *priv = netdev_priv(ndev);
+ unsigned int i;
+
+ unregister_netdev(ndev);
+
+ pm_runtime_put_sync(dev);
+ for (i = 0; priv->pm && i < priv->num_pms; i++) {
+ dev_pm_domain_detach(priv->pm[i], true);
+ device_link_del(priv->link_pm[i]);
+ }
+
+ for (i = 0; i < priv->num_resets; i++)
+ reset_control_assert(priv->reset[i]);
+
+ for (i = 0; i < priv->num_clocks; i++)
+ clk_disable_unprepare(priv->clock[i]);
+
+ free_netdev(ndev);
+
+ return 0;
+}
+
+static const struct of_device_id bcm6368_enetsw_of_match[] = {
+ { .compatible = "brcm,bcm6318-enetsw", },
+ { .compatible = "brcm,bcm6328-enetsw", },
+ { .compatible = "brcm,bcm6362-enetsw", },
+ { .compatible = "brcm,bcm6368-enetsw", },
+ { .compatible = "brcm,bcm63268-enetsw", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, bcm6368_mdio_ids);
+
+static struct platform_driver bcm6368_enetsw_driver = {
+ .driver = {
+ .name = "bcm6368-enetsw",
+ .of_match_table = of_match_ptr(bcm6368_enetsw_of_match),
+ },
+ .probe = bcm6368_enetsw_probe,
+ .remove = bcm6368_enetsw_remove,
+};
+module_platform_driver(bcm6368_enetsw_driver);
diff --git a/target/linux/bmips/generic/base-files/etc/board.d/02_network b/target/linux/bmips/generic/base-files/etc/board.d/02_network
new file mode 100644
index 0000000000..3e60660331
--- /dev/null
+++ b/target/linux/bmips/generic/base-files/etc/board.d/02_network
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+comtrend,ar-5315u |\
+comtrend,ar-5387un |\
+comtrend,vr-3025u)
+ ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/bmips/nand/base-files/etc/board.d/02_network b/target/linux/bmips/nand/base-files/etc/board.d/02_network
new file mode 100644
index 0000000000..db62e61287
--- /dev/null
+++ b/target/linux/bmips/nand/base-files/etc/board.d/02_network
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+comtrend,vr-3032u)
+ ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/bmips/patches-5.10/500-net-dsa-b53-relax-is63xx-condition.patch b/target/linux/bmips/patches-5.10/500-net-dsa-b53-relax-is63xx-condition.patch
new file mode 100644
index 0000000000..f5dd4e2c59
--- /dev/null
+++ b/target/linux/bmips/patches-5.10/500-net-dsa-b53-relax-is63xx-condition.patch
@@ -0,0 +1,29 @@
+From cd6906754bbe3e0665ecaeca2cfb26d927fe9277 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Mon, 1 Mar 2021 07:29:29 +0100
+Subject: [PATCH 1/3] net: dsa: b53: relax is63xx() condition
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+BCM63xx switches are present on bcm63xx and bmips devices.
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+---
+ drivers/net/dsa/b53/b53_priv.h | 4 ----
+ 1 file changed, 4 deletions(-)
+
+--- a/drivers/net/dsa/b53/b53_priv.h
++++ b/drivers/net/dsa/b53/b53_priv.h
+@@ -185,11 +185,7 @@ static inline int is531x5(struct b53_dev
+
+ static inline int is63xx(struct b53_device *dev)
+ {
+-#ifdef CONFIG_BCM63XX
+ return dev->chip_id == BCM63XX_DEVICE_ID;
+-#else
+- return 0;
+-#endif
+ }
+
+ static inline int is5301x(struct b53_device *dev)
diff --git a/target/linux/bmips/patches-5.10/501-net-dsa-b53-mmap-Add-device-tree-support.patch b/target/linux/bmips/patches-5.10/501-net-dsa-b53-mmap-Add-device-tree-support.patch
new file mode 100644
index 0000000000..e9eb87cb5c
--- /dev/null
+++ b/target/linux/bmips/patches-5.10/501-net-dsa-b53-mmap-Add-device-tree-support.patch
@@ -0,0 +1,82 @@
+From f5419e7f362ae1c462baf28a2da7360267f8e4f9 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Mon, 1 Mar 2021 07:32:32 +0100
+Subject: [PATCH 2/3] net: dsa: b53: mmap: Add device tree support
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add device tree support to b53_mmap.c while keeping platform devices support.
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+---
+ drivers/net/dsa/b53/b53_mmap.c | 36 ++++++++++++++++++++++++++++++++++
+ 1 file changed, 36 insertions(+)
+
+--- a/drivers/net/dsa/b53/b53_mmap.c
++++ b/drivers/net/dsa/b53/b53_mmap.c
+@@ -228,12 +228,64 @@ static const struct b53_io_ops b53_mmap_
+ .write64 = b53_mmap_write64,
+ };
+
++static int b53_mmap_probe_of(struct platform_device *pdev,
++ struct b53_platform_data **ppdata)
++{
++ struct device *dev = &pdev->dev;
++ struct device_node *np = dev->of_node;
++ struct device_node *of_ports, *of_port;
++ struct b53_platform_data *pdata;
++ void __iomem *mem;
++
++ mem = devm_platform_ioremap_resource(pdev, 0);
++ if (IS_ERR(mem))
++ return PTR_ERR(mem);
++
++ pdata = devm_kzalloc(dev, sizeof(struct b53_platform_data),
++ GFP_KERNEL);
++ if (!pdata)
++ return -ENOMEM;
++
++ pdata->regs = mem;
++ pdata->chip_id = BCM63XX_DEVICE_ID;
++ pdata->big_endian = of_property_read_bool(np, "big-endian");
++
++ of_ports = of_get_child_by_name(np, "ports");
++ if (!of_ports) {
++ dev_err(dev, "no ports child node found\n");
++ return -EINVAL;
++ }
++
++ for_each_available_child_of_node(of_ports, of_port) {
++ u32 reg;
++
++ if (of_property_read_u32(of_port, "reg", &reg))
++ continue;
++
++ if (reg < B53_CPU_PORT)
++ pdata->enabled_ports |= BIT(reg);
++ }
++
++ *ppdata = pdata;
++
++ return 0;
++}
++
+ static int b53_mmap_probe(struct platform_device *pdev)
+ {
++ struct device_node *np = pdev->dev.of_node;
+ struct b53_platform_data *pdata = pdev->dev.platform_data;
+ struct b53_mmap_priv *priv;
+ struct b53_device *dev;
+
++ if (np) {
++ int ret = b53_mmap_probe_of(pdev, &pdata);
++ if (ret) {
++ dev_err(&pdev->dev, "OF probe error\n");
++ return ret;
++ }
++ }
++
+ if (!pdata)
+ return -EINVAL;
+
diff --git a/target/linux/bmips/patches-5.10/502-net-dsa-b53-support-tags-for-legacy-switches.patch b/target/linux/bmips/patches-5.10/502-net-dsa-b53-support-tags-for-legacy-switches.patch
new file mode 100644
index 0000000000..b8aa8b844d
--- /dev/null
+++ b/target/linux/bmips/patches-5.10/502-net-dsa-b53-support-tags-for-legacy-switches.patch
@@ -0,0 +1,209 @@
+From 3bc3d79efdff6e29b80bf35f7a56baaa36e4d8fe Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Fri, 12 Mar 2021 12:35:39 +0100
+Subject: [PATCH] net: dsa: b53: support tags for legacy switches
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+---
+ drivers/net/dsa/b53/Kconfig | 1 +
+ drivers/net/dsa/b53/b53_common.c | 6 +++
+ include/net/dsa.h | 2 +
+ net/dsa/Kconfig | 7 +++
+ net/dsa/tag_brcm.c | 93 ++++++++++++++++++++++++++++++++
+ 5 files changed, 109 insertions(+)
+
+--- a/drivers/net/dsa/b53/Kconfig
++++ b/drivers/net/dsa/b53/Kconfig
+@@ -3,6 +3,7 @@ menuconfig B53
+ tristate "Broadcom BCM53xx managed switch support"
+ depends on NET_DSA
+ select NET_DSA_TAG_BRCM
++ select NET_DSA_TAG_BRCM_LEGACY
+ select NET_DSA_TAG_BRCM_PREPEND
+ help
+ This driver adds support for Broadcom managed switch chips. It supports
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -1992,6 +1992,7 @@ static bool b53_can_enable_brcm_tags(str
+
+ switch (tag_protocol) {
+ case DSA_TAG_PROTO_BRCM:
++ case DSA_TAG_PROTO_BRCM_LEGACY:
+ case DSA_TAG_PROTO_BRCM_PREPEND:
+ dev_warn(ds->dev,
+ "Port %d is stacked to Broadcom tag switch\n", port);
+@@ -2013,12 +2014,16 @@ enum dsa_tag_protocol b53_get_tag_protoc
+ /* Older models (5325, 5365) support a different tag format that we do
+ * not support in net/dsa/tag_brcm.c yet.
+ */
+- if (is5325(dev) || is5365(dev) ||
+- !b53_can_enable_brcm_tags(ds, port, mprot)) {
++ if (!b53_can_enable_brcm_tags(ds, port, mprot)) {
+ dev->tag_protocol = DSA_TAG_PROTO_NONE;
+ goto out;
+ }
+
++ if (is5325(dev) || is5365(dev) || is63xx(dev)) {
++ dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY;
++ goto out;
++ }
++
+ /* Broadcom BCM58xx chips have a flow accelerator on Port 8
+ * which requires us to use the prepended Broadcom tag type
+ */
+--- a/include/net/dsa.h
++++ b/include/net/dsa.h
+@@ -45,10 +45,12 @@ struct phylink_link_state;
+ #define DSA_TAG_PROTO_OCELOT_VALUE 15
+ #define DSA_TAG_PROTO_AR9331_VALUE 16
+ #define DSA_TAG_PROTO_RTL4_A_VALUE 17
++#define DSA_TAG_PROTO_BRCM_LEGACY_VALUE 22
+
+ enum dsa_tag_protocol {
+ DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE,
+ DSA_TAG_PROTO_BRCM = DSA_TAG_PROTO_BRCM_VALUE,
++ DSA_TAG_PROTO_BRCM_LEGACY = DSA_TAG_PROTO_BRCM_LEGACY_VALUE,
+ DSA_TAG_PROTO_BRCM_PREPEND = DSA_TAG_PROTO_BRCM_PREPEND_VALUE,
+ DSA_TAG_PROTO_DSA = DSA_TAG_PROTO_DSA_VALUE,
+ DSA_TAG_PROTO_EDSA = DSA_TAG_PROTO_EDSA_VALUE,
+--- a/net/dsa/Kconfig
++++ b/net/dsa/Kconfig
+@@ -47,6 +47,13 @@ config NET_DSA_TAG_BRCM
+ Say Y if you want to enable support for tagging frames for the
+ Broadcom switches which place the tag after the MAC source address.
+
++config NET_DSA_TAG_BRCM_LEGACY
++ tristate "Tag driver for Broadcom legacy switches using in-frame headers"
++ select NET_DSA_TAG_BRCM_COMMON
++ help
++ Say Y if you want to enable support for tagging frames for the
++ Broadcom legacy switches which place the tag after the MAC source
++ address.
+
+ config NET_DSA_TAG_BRCM_PREPEND
+ tristate "Tag driver for Broadcom switches using prepended headers"
+--- a/net/dsa/tag_brcm.c
++++ b/net/dsa/tag_brcm.c
+@@ -8,9 +8,23 @@
+ #include <linux/etherdevice.h>
+ #include <linux/list.h>
+ #include <linux/slab.h>
++#include <linux/types.h>
+
+ #include "dsa_priv.h"
+
++struct bcm_legacy_tag {
++ uint16_t type;
++#define BRCM_LEG_TYPE 0x8874
++
++ uint32_t tag;
++#define BRCM_LEG_TAG_PORT_ID (0xf)
++#define BRCM_LEG_TAG_MULTICAST (1 << 29)
++#define BRCM_LEG_TAG_EGRESS (2 << 29)
++#define BRCM_LEG_TAG_INGRESS (3 << 29)
++} __attribute__((packed));
++
++#define BRCM_LEG_TAG_LEN sizeof(struct bcm_legacy_tag)
++
+ /* This tag length is 4 bytes, older ones were 6 bytes, we do not
+ * handle them
+ */
+@@ -197,6 +211,85 @@ DSA_TAG_DRIVER(brcm_netdev_ops);
+ MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM);
+ #endif
+
++#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY)
++static struct sk_buff *brcm_leg_tag_xmit(struct sk_buff *skb,
++ struct net_device *dev)
++{
++ struct dsa_port *dp = dsa_slave_to_port(dev);
++ struct bcm_legacy_tag *brcm_tag;
++
++ if (skb_cow_head(skb, BRCM_LEG_TAG_LEN) < 0)
++ return NULL;
++
++ /* The Ethernet switch we are interfaced with needs packets to be at
++ * least 64 bytes (including FCS) otherwise they will be discarded when
++ * they enter the switch port logic. When Broadcom tags are enabled, we
++ * need to make sure that packets are at least 70 bytes
++ * (including FCS and tag) because the length verification is done after
++ * the Broadcom tag is stripped off the ingress packet.
++ *
++ * Let dsa_slave_xmit() free the SKB
++ */
++ if (__skb_put_padto(skb, ETH_ZLEN + BRCM_LEG_TAG_LEN, false))
++ return NULL;
++
++ skb_push(skb, BRCM_LEG_TAG_LEN);
++
++ memmove(skb->data, skb->data + BRCM_LEG_TAG_LEN, 2 * ETH_ALEN);
++
++ brcm_tag = (struct bcm_legacy_tag *) (skb->data + 2 * ETH_ALEN);
++
++ brcm_tag->type = BRCM_LEG_TYPE;
++ brcm_tag->tag = BRCM_LEG_TAG_EGRESS;
++ brcm_tag->tag |= dp->index & BRCM_LEG_TAG_PORT_ID;
++
++ return skb;
++}
++
++
++static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb,
++ struct net_device *dev,
++ struct packet_type *pt)
++{
++ int source_port;
++ struct bcm_legacy_tag *brcm_tag;
++
++ if (unlikely(!pskb_may_pull(skb, BRCM_LEG_TAG_LEN)))
++ return NULL;
++
++ brcm_tag = (struct bcm_legacy_tag *) (skb->data - 2);
++
++ source_port = brcm_tag->tag & BRCM_LEG_TAG_PORT_ID;
++
++ skb->dev = dsa_master_find_slave(dev, 0, source_port);
++ if (!skb->dev)
++ return NULL;
++
++ /* Remove Broadcom tag and update checksum */
++ skb_pull_rcsum(skb, BRCM_LEG_TAG_LEN);
++
++ skb->offload_fwd_mark = 1;
++
++ /* Move the Ethernet DA and SA */
++ memmove(skb->data - ETH_HLEN,
++ skb->data - ETH_HLEN - BRCM_LEG_TAG_LEN,
++ 2 * ETH_ALEN);
++
++ return skb;
++}
++
++static const struct dsa_device_ops brcm_legacy_netdev_ops = {
++ .name = "brcm-legacy",
++ .proto = DSA_TAG_PROTO_BRCM_LEGACY,
++ .xmit = brcm_leg_tag_xmit,
++ .rcv = brcm_leg_tag_rcv,
++ .overhead = BRCM_LEG_TAG_LEN,
++};
++
++DSA_TAG_DRIVER(brcm_legacy_netdev_ops);
++MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM_LEGACY);
++#endif /* CONFIG_NET_DSA_TAG_BRCM_LEGACY */
++
+ #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND)
+ static struct sk_buff *brcm_tag_xmit_prepend(struct sk_buff *skb,
+ struct net_device *dev)
+@@ -229,6 +322,9 @@ static struct dsa_tag_driver *dsa_tag_dr
+ #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM)
+ &DSA_TAG_DRIVER_NAME(brcm_netdev_ops),
+ #endif
++#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY)
++ &DSA_TAG_DRIVER_NAME(brcm_legacy_netdev_ops),
++#endif
+ #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND)
+ &DSA_TAG_DRIVER_NAME(brcm_prepend_netdev_ops),
+ #endif
diff --git a/target/linux/bmips/patches-5.10/503-net-broadcom-add-BCM6368-enetsw-controller-driver.patch b/target/linux/bmips/patches-5.10/503-net-broadcom-add-BCM6368-enetsw-controller-driver.patch
new file mode 100644
index 0000000000..c2c2e968e9
--- /dev/null
+++ b/target/linux/bmips/patches-5.10/503-net-broadcom-add-BCM6368-enetsw-controller-driver.patch
@@ -0,0 +1,46 @@
+From 590b60fb08cb1e70fe02d3f407c6b3dbe9ad06ff Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Mon, 1 Mar 2021 07:34:39 +0100
+Subject: [PATCH 3/4] net: broadcom: add BCM6368 enetsw controller driver
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This controller is present on BCM6318, BCM6328, BCM6362, BCM6368 and BCM63268
+SoCs.
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+---
+ drivers/net/ethernet/broadcom/Kconfig | 8 +
+ drivers/net/ethernet/broadcom/Makefile | 1 +
+ .../net/ethernet/broadcom/bcm6368-enetsw.c | 1111 +++++++++++++++++
+ 3 files changed, 1120 insertions(+)
+ create mode 100644 drivers/net/ethernet/broadcom/bcm6368-enetsw.c
+
+--- a/drivers/net/ethernet/broadcom/Kconfig
++++ b/drivers/net/ethernet/broadcom/Kconfig
+@@ -60,6 +60,14 @@ config BCM63XX_ENET
+ This driver supports the ethernet MACs in the Broadcom 63xx
+ MIPS chipset family (BCM63XX).
+
++config BCM6368_ENETSW
++ tristate "Broadcom BCM6368 internal mac support"
++ depends on BMIPS_GENERIC || COMPILE_TEST
++ default y
++ help
++ This driver supports Ethernet controller integrated into Broadcom
++ BCM6368 family SoCs.
++
+ config BCMGENET
+ tristate "Broadcom GENET internal MAC support"
+ depends on HAS_IOMEM
+--- a/drivers/net/ethernet/broadcom/Makefile
++++ b/drivers/net/ethernet/broadcom/Makefile
+@@ -5,6 +5,7 @@
+
+ obj-$(CONFIG_B44) += b44.o
+ obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
++obj-$(CONFIG_BCM6368_ENETSW) += bcm6368-enetsw.o
+ obj-$(CONFIG_BCMGENET) += genet/
+ obj-$(CONFIG_BNX2) += bnx2.o
+ obj-$(CONFIG_CNIC) += cnic.o
diff --git a/target/linux/bmips/patches-5.10/504-net-mdio-Add-BCM6368-MDIO-mux-bus-controller.patch b/target/linux/bmips/patches-5.10/504-net-mdio-Add-BCM6368-MDIO-mux-bus-controller.patch
new file mode 100644
index 0000000000..a869681312
--- /dev/null
+++ b/target/linux/bmips/patches-5.10/504-net-mdio-Add-BCM6368-MDIO-mux-bus-controller.patch
@@ -0,0 +1,231 @@
+From b6ecb2bca2b8ff80ae4b1b15f09dcf071f4ceaf4 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Mon, 1 Mar 2021 16:42:12 +0100
+Subject: [PATCH] net: mdio: Add BCM6368 MDIO mux bus controller
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This controller is present on BCM6318, BCM6328, BCM6362, BCM6368 and BCM63268
+SoCs.
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+---
+ drivers/net/mdio/Kconfig | 11 ++
+ drivers/net/mdio/Makefile | 1 +
+ drivers/net/mdio/mdio-mux-bcm6368.c | 179 ++++++++++++++++++++++++++++
+ 3 files changed, 191 insertions(+)
+ create mode 100644 drivers/net/mdio/mdio-mux-bcm6368.c
+
+--- a/drivers/net/mdio/Kconfig
++++ b/drivers/net/mdio/Kconfig
+@@ -200,6 +200,17 @@ config MDIO_BUS_MUX_MESON_G12A
+ the amlogic g12a SoC. The multiplexers connects either the external
+ or the internal MDIO bus to the parent bus.
+
++config MDIO_BUS_MUX_BCM6368
++ tristate "Broadcom BCM6368 MDIO bus multiplexers"
++ depends on OF && OF_MDIO && (BMIPS_GENERIC || COMPILE_TEST)
++ select MDIO_BUS_MUX
++ default BMIPS_GENERIC
++ help
++ This module provides a driver for MDIO bus multiplexers found in
++ BCM6368 based Broadcom SoCs. This multiplexer connects one of several
++ child MDIO bus to a parent bus. Buses could be internal as well as
++ external and selection logic lies inside the same multiplexer.
++
+ config MDIO_BUS_MUX_BCM_IPROC
+ tristate "Broadcom iProc based MDIO bus multiplexers"
+ depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
+--- a/drivers/net/mdio/Makefile
++++ b/drivers/net/mdio/Makefile
+@@ -22,6 +22,7 @@ obj-$(CONFIG_MDIO_THUNDER) += mdio-thun
+ obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
+
+ obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
++obj-$(CONFIG_MDIO_BUS_MUX_BCM6368) += mdio-mux-bcm6368.o
+ obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o
+ obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
+ obj-$(CONFIG_MDIO_BUS_MUX_MESON_G12A) += mdio-mux-meson-g12a.o
+--- /dev/null
++++ b/drivers/net/mdio/mdio-mux-bcm6368.c
+@@ -0,0 +1,179 @@
++// SPDX-License-Identifier: GPL-2.0+
++/*
++ * Broadcom BCM6368 mdiomux bus controller driver
++ *
++ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
++ */
++
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/mdio-mux.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/of_platform.h>
++#include <linux/of_mdio.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
++#include <linux/sched.h>
++
++#define MDIOC_REG 0x0
++#define MDIOC_EXT_MASK BIT(16)
++#define MDIOC_REG_SHIFT 20
++#define MDIOC_PHYID_SHIFT 25
++#define MDIOC_RD_MASK BIT(30)
++#define MDIOC_WR_MASK BIT(31)
++
++#define MDIOD_REG 0x4
++
++struct bcm6368_mdiomux_desc {
++ void *mux_handle;
++ void __iomem *base;
++ struct device *dev;
++ struct mii_bus *mii_bus;
++ int ext_phy;
++};
++
++static int bcm6368_mdiomux_read(struct mii_bus *bus, int phy_id, int loc)
++{
++ struct bcm6368_mdiomux_desc *md = bus->priv;
++ uint32_t reg;
++ int ret;
++
++ __raw_writel(0, md->base + MDIOC_REG);
++
++ reg = MDIOC_RD_MASK |
++ (phy_id << MDIOC_PHYID_SHIFT) |
++ (loc << MDIOC_REG_SHIFT);
++ if (md->ext_phy)
++ reg |= MDIOC_EXT_MASK;
++
++ __raw_writel(reg, md->base + MDIOC_REG);
++ udelay(50);
++ ret = __raw_readw(md->base + MDIOD_REG);
++
++ return ret;
++}
++
++static int bcm6368_mdiomux_write(struct mii_bus *bus, int phy_id, int loc,
++ uint16_t val)
++{
++ struct bcm6368_mdiomux_desc *md = bus->priv;
++ uint32_t reg;
++
++ __raw_writel(0, md->base + MDIOC_REG);
++
++ reg = MDIOC_WR_MASK |
++ (phy_id << MDIOC_PHYID_SHIFT) |
++ (loc << MDIOC_REG_SHIFT);
++ if (md->ext_phy)
++ reg |= MDIOC_EXT_MASK;
++ reg |= val;
++
++ __raw_writel(reg, md->base + MDIOC_REG);
++ udelay(50);
++
++ return 0;
++}
++
++static int bcm6368_mdiomux_switch_fn(int current_child, int desired_child,
++ void *data)
++{
++ struct bcm6368_mdiomux_desc *md = data;
++
++ md->ext_phy = desired_child;
++
++ return 0;
++}
++
++static int bcm6368_mdiomux_probe(struct platform_device *pdev)
++{
++ struct bcm6368_mdiomux_desc *md;
++ struct mii_bus *bus;
++ struct resource *res;
++ int rc;
++
++ md = devm_kzalloc(&pdev->dev, sizeof(*md), GFP_KERNEL);
++ if (!md)
++ return -ENOMEM;
++ md->dev = &pdev->dev;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res)
++ return -EINVAL;
++
++ /* Just ioremap, as this MDIO block is usually integrated into an
++ * Ethernet MAC controller register range
++ */
++ md->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
++ if (!md->base) {
++ dev_err(&pdev->dev, "failed to ioremap register\n");
++ return -ENOMEM;
++ }
++
++ md->mii_bus = devm_mdiobus_alloc(&pdev->dev);
++ if (!md->mii_bus) {
++ dev_err(&pdev->dev, "mdiomux bus alloc failed\n");
++ return ENOMEM;
++ }
++
++ bus = md->mii_bus;
++ bus->priv = md;
++ bus->name = "BCM6368 MDIO mux bus";
++ snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id);
++ bus->parent = &pdev->dev;
++ bus->read = bcm6368_mdiomux_read;
++ bus->write = bcm6368_mdiomux_write;
++ bus->phy_mask = 0x3f;
++ bus->dev.of_node = pdev->dev.of_node;
++
++ rc = mdiobus_register(bus);
++ if (rc) {
++ dev_err(&pdev->dev, "mdiomux registration failed\n");
++ return rc;
++ }
++
++ platform_set_drvdata(pdev, md);
++
++ rc = mdio_mux_init(md->dev, md->dev->of_node,
++ bcm6368_mdiomux_switch_fn, &md->mux_handle, md,
++ md->mii_bus);
++ if (rc) {
++ dev_info(md->dev, "mdiomux initialization failed\n");
++ goto out_register;
++ }
++
++ dev_info(&pdev->dev, "Broadcom BCM6368 MDIO mux bus\n");
++
++ return 0;
++
++out_register:
++ mdiobus_unregister(bus);
++ return rc;
++}
++
++static int bcm6368_mdiomux_remove(struct platform_device *pdev)
++{
++ struct bcm6368_mdiomux_desc *md = platform_get_drvdata(pdev);
++
++ mdio_mux_uninit(md->mux_handle);
++ mdiobus_unregister(md->mii_bus);
++
++ return 0;
++}
++
++static const struct of_device_id bcm6368_mdiomux_ids[] = {
++ { .compatible = "brcm,bcm6368-mdio-mux", },
++ { /* sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, bcm6368_mdiomux_ids);
++
++static struct platform_driver bcm6368_mdiomux_driver = {
++ .driver = {
++ .name = "bcm6368-mdio-mux",
++ .of_match_table = bcm6368_mdiomux_ids,
++ },
++ .probe = bcm6368_mdiomux_probe,
++ .remove = bcm6368_mdiomux_remove,
++};
++module_platform_driver(bcm6368_mdiomux_driver);