aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/sunxi/patches-4.9/0013-arm64-dts-allwinner-add-USB1-related-nodes-of-Allwin.patch84
-rw-r--r--target/linux/sunxi/patches-4.9/0014-arm64-dts-allwinner-sort-the-nodes-in-sun50i-a64-pin.patch40
-rw-r--r--target/linux/sunxi/patches-4.9/0015-arm64-dts-allwinner-enable-EHCI1-OHCI1-and-USB-PHY-n.patch47
-rw-r--r--target/linux/sunxi/patches-4.9/0016-arm64-dts-add-MUSB-node-to-Allwinner-A64-dtsi.patch42
-rw-r--r--target/linux/sunxi/patches-4.9/0017-arm64-dts-enable-the-MUSB-controller-of-Pine64-in-ho.patch32
-rw-r--r--target/linux/sunxi/patches-4.9/0018-arm64-dts-allwinner-Remove-no-longer-used-pinctrl-su.patch31
-rw-r--r--target/linux/sunxi/patches-4.9/0019-arm64-allwinner-a64-Add-MMC-nodes.patch69
-rw-r--r--target/linux/sunxi/patches-4.9/0020-arm64-allwinner-a64-Add-MMC-pinctrl-nodes.patch50
-rw-r--r--target/linux/sunxi/patches-4.9/0022-arm64-allwinner-pine64-add-MMC-support.patch62
-rw-r--r--target/linux/sunxi/patches-4.9/0023-arm64-allwinner-a64-add-UART1-pin-nodes.patch35
-rw-r--r--target/linux/sunxi/patches-4.9/0024-arm64-allwinner-a64-add-r_ccu-node.patch52
-rw-r--r--target/linux/sunxi/patches-4.9/0025-arm64-allwinner-a64-add-R_PIO-pinctrl-node.patch35
-rw-r--r--target/linux/sunxi/patches-4.9/0026-arm64-allwinner-a64-add-pmu0-regs-for-USB-PHY.patch29
-rw-r--r--target/linux/sunxi/patches-4.9/0027-arm64-allwinner-a64-Add-PLL_PERIPH0-clock-to-the-R_C.patch32
14 files changed, 640 insertions, 0 deletions
diff --git a/target/linux/sunxi/patches-4.9/0013-arm64-dts-allwinner-add-USB1-related-nodes-of-Allwin.patch b/target/linux/sunxi/patches-4.9/0013-arm64-dts-allwinner-add-USB1-related-nodes-of-Allwin.patch
new file mode 100644
index 0000000000..f96570c858
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0013-arm64-dts-allwinner-add-USB1-related-nodes-of-Allwin.patch
@@ -0,0 +1,84 @@
+From a004ee350177ece3c059831ea49293d62aea7ca6 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.xyz>
+Date: Tue, 22 Nov 2016 23:58:29 +0800
+Subject: arm64: dts: allwinner: add USB1-related nodes of Allwinner A64
+
+Allwinner A64 have two HCI USB controllers, a OTG controller and a USB
+PHY device which have two ports. One of the port is wired to both a HCI
+USB controller and the OTG controller, which is currently not supported.
+The another one is only wired to a HCI controller, and the device node of
+OHCI/EHCI controller of the port can be added now.
+
+Also the A64 USB PHY device node is also added for the HCI controllers to
+work.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 46 +++++++++++++++++++++++++++
+ 1 file changed, 46 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -42,8 +42,10 @@
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
++#include <dt-bindings/clock/sun50i-a64-ccu.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
++#include <dt-bindings/reset/sun50i-a64-ccu.h>
+
+ / {
+ interrupt-parent = <&gic>;
+@@ -120,6 +122,50 @@
+ #size-cells = <1>;
+ ranges;
+
++ usbphy: phy@01c19400 {
++ compatible = "allwinner,sun50i-a64-usb-phy";
++ reg = <0x01c19400 0x14>,
++ <0x01c1b800 0x4>;
++ reg-names = "phy_ctrl",
++ "pmu1";
++ clocks = <&ccu CLK_USB_PHY0>,
++ <&ccu CLK_USB_PHY1>;
++ clock-names = "usb0_phy",
++ "usb1_phy";
++ resets = <&ccu RST_USB_PHY0>,
++ <&ccu RST_USB_PHY1>;
++ reset-names = "usb0_reset",
++ "usb1_reset";
++ status = "disabled";
++ #phy-cells = <1>;
++ };
++
++ ehci1: usb@01c1b000 {
++ compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
++ reg = <0x01c1b000 0x100>;
++ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_OHCI1>,
++ <&ccu CLK_BUS_EHCI1>,
++ <&ccu CLK_USB_OHCI1>;
++ resets = <&ccu RST_BUS_OHCI1>,
++ <&ccu RST_BUS_EHCI1>;
++ phys = <&usbphy 1>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ohci1: usb@01c1b400 {
++ compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
++ reg = <0x01c1b400 0x100>;
++ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_OHCI1>,
++ <&ccu CLK_USB_OHCI1>;
++ resets = <&ccu RST_BUS_OHCI1>;
++ phys = <&usbphy 1>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
+ ccu: clock@01c20000 {
+ compatible = "allwinner,sun50i-a64-ccu";
+ reg = <0x01c20000 0x400>;
diff --git a/target/linux/sunxi/patches-4.9/0014-arm64-dts-allwinner-sort-the-nodes-in-sun50i-a64-pin.patch b/target/linux/sunxi/patches-4.9/0014-arm64-dts-allwinner-sort-the-nodes-in-sun50i-a64-pin.patch
new file mode 100644
index 0000000000..4c7d6dafe2
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0014-arm64-dts-allwinner-sort-the-nodes-in-sun50i-a64-pin.patch
@@ -0,0 +1,40 @@
+From ac93c09cdbaf1229c21f67a5db1c3c6df7d503e5 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.xyz>
+Date: Tue, 22 Nov 2016 23:58:30 +0800
+Subject: arm64: dts: allwinner: sort the nodes in sun50i-a64-pine64.dts
+
+In this dts file, uart0 node is put before i2c1.
+
+Move the uart0 node to the end to satisfy alphebetical order.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 12 ++++++------
+ 1 file changed, 6 insertions(+), 6 deletions(-)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+@@ -57,12 +57,6 @@
+ };
+ };
+
+-&uart0 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&uart0_pins_a>;
+- status = "okay";
+-};
+-
+ &i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+@@ -72,3 +66,9 @@
+ &i2c1_pins {
+ bias-pull-up;
+ };
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++};
diff --git a/target/linux/sunxi/patches-4.9/0015-arm64-dts-allwinner-enable-EHCI1-OHCI1-and-USB-PHY-n.patch b/target/linux/sunxi/patches-4.9/0015-arm64-dts-allwinner-enable-EHCI1-OHCI1-and-USB-PHY-n.patch
new file mode 100644
index 0000000000..451ec595c9
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0015-arm64-dts-allwinner-enable-EHCI1-OHCI1-and-USB-PHY-n.patch
@@ -0,0 +1,47 @@
+From d49f9dbc8f0c4521fa56477d051a3bd1158f2595 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.xyz>
+Date: Tue, 22 Nov 2016 23:58:31 +0800
+Subject: arm64: dts: allwinner: enable EHCI1, OHCI1 and USB PHY nodes in
+ Pine64
+
+Pine64 have two USB Type-A ports, which are wired to the two ports of
+A64 USB PHY, and the lower port is the EHCI/OHCI1 port.
+
+Enable the necessary nodes to enable the lower USB port to work.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+@@ -57,6 +57,10 @@
+ };
+ };
+
++&ehci1 {
++ status = "okay";
++};
++
+ &i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+@@ -67,8 +71,16 @@
+ bias-pull-up;
+ };
+
++&ohci1 {
++ status = "okay";
++};
++
+ &uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
++
++&usbphy {
++ status = "okay";
++};
diff --git a/target/linux/sunxi/patches-4.9/0016-arm64-dts-add-MUSB-node-to-Allwinner-A64-dtsi.patch b/target/linux/sunxi/patches-4.9/0016-arm64-dts-add-MUSB-node-to-Allwinner-A64-dtsi.patch
new file mode 100644
index 0000000000..804d00521b
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0016-arm64-dts-add-MUSB-node-to-Allwinner-A64-dtsi.patch
@@ -0,0 +1,42 @@
+From 972a3ecdf27f3ebdd1ce0dccd1b548ef3c04b8ed Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.xyz>
+Date: Wed, 23 Nov 2016 00:59:01 +0800
+Subject: arm64: dts: add MUSB node to Allwinner A64 dtsi
+
+Allwinner A64 SoC has a MUSB controller like the one in A33, so add
+a node for it, just use the compatible of A33 MUSB.
+
+Host mode is tested to work properly on Pine64 and will be added into
+the device tree of Pine64 in next patch.
+
+Peripheral mode is also tested on Pine64, by changing dr_mode property
+of usb_otg node and use a non-standard USB Type-A to Type-A cable.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -122,6 +122,19 @@
+ #size-cells = <1>;
+ ranges;
+
++ usb_otg: usb@01c19000 {
++ compatible = "allwinner,sun8i-a33-musb";
++ reg = <0x01c19000 0x0400>;
++ clocks = <&ccu CLK_BUS_OTG>;
++ resets = <&ccu RST_BUS_OTG>;
++ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "mc";
++ phys = <&usbphy 0>;
++ phy-names = "usb";
++ extcon = <&usbphy 0>;
++ status = "disabled";
++ };
++
+ usbphy: phy@01c19400 {
+ compatible = "allwinner,sun50i-a64-usb-phy";
+ reg = <0x01c19400 0x14>,
diff --git a/target/linux/sunxi/patches-4.9/0017-arm64-dts-enable-the-MUSB-controller-of-Pine64-in-ho.patch b/target/linux/sunxi/patches-4.9/0017-arm64-dts-enable-the-MUSB-controller-of-Pine64-in-ho.patch
new file mode 100644
index 0000000000..3992ab6510
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0017-arm64-dts-enable-the-MUSB-controller-of-Pine64-in-ho.patch
@@ -0,0 +1,32 @@
+From f57e8384c5d2417fd8707c577d8e622fc1570b6c Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.xyz>
+Date: Wed, 23 Nov 2016 00:59:02 +0800
+Subject: arm64: dts: enable the MUSB controller of Pine64 in host-only mode
+
+A64 has a MUSB controller wired to the USB PHY 0, which is connected
+to the upper USB Type-A port of Pine64.
+
+As the port is a Type-A female port, enable it in host-only mode in the
+device tree, which makes devices with USB Type-A male port can work on
+this port (which is originally designed by Pine64 team).
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+@@ -81,6 +81,11 @@
+ status = "okay";
+ };
+
++&usb_otg {
++ dr_mode = "host";
++ status = "okay";
++};
++
+ &usbphy {
+ status = "okay";
+ };
diff --git a/target/linux/sunxi/patches-4.9/0018-arm64-dts-allwinner-Remove-no-longer-used-pinctrl-su.patch b/target/linux/sunxi/patches-4.9/0018-arm64-dts-allwinner-Remove-no-longer-used-pinctrl-su.patch
new file mode 100644
index 0000000000..d2d54e937f
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0018-arm64-dts-allwinner-Remove-no-longer-used-pinctrl-su.patch
@@ -0,0 +1,31 @@
+From 4f9758302ccaf753cd4ba6a5eb740392a4d24773 Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens@csie.org>
+Date: Tue, 24 Jan 2017 10:32:29 +0800
+Subject: arm64: dts: allwinner: Remove no longer used pinctrl/sun4i-a10.h
+ header
+
+All dts files for the sunxi platform have been switched to the generic
+pinconf bindings. As a result, the sunxi specific pinctrl macros are
+no longer used.
+
+Remove the #include entry with the following command:
+
+ sed -i -e '/pinctrl\/sun4i-a10.h/D' \
+ arch/arm64/boot/dts/allwinner/*.dts?
+
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -44,7 +44,6 @@
+
+ #include <dt-bindings/clock/sun50i-a64-ccu.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+-#include <dt-bindings/pinctrl/sun4i-a10.h>
+ #include <dt-bindings/reset/sun50i-a64-ccu.h>
+
+ / {
diff --git a/target/linux/sunxi/patches-4.9/0019-arm64-allwinner-a64-Add-MMC-nodes.patch b/target/linux/sunxi/patches-4.9/0019-arm64-allwinner-a64-Add-MMC-nodes.patch
new file mode 100644
index 0000000000..1f91e9bead
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0019-arm64-allwinner-a64-Add-MMC-nodes.patch
@@ -0,0 +1,69 @@
+From f3dff3478a8a7b09f9a92023955a151584658893 Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Thu, 6 Oct 2016 02:25:22 +0100
+Subject: arm64: allwinner: a64: Add MMC nodes
+
+The A64 has 3 MMC controllers, one of them being especially targeted to
+eMMC. Among other things, it has a data strobe signal and a 8 bits data
+width.
+
+The two other are more usual controllers that will have a 4 bits width at
+most and no data strobe signal, which limits it to more usual SD or MMC
+peripherals.
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
+Acked-by: Chen-Yu Tsai <wens@csie.org>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 39 +++++++++++++++++++++++++++
+ 1 file changed, 39 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -121,6 +121,45 @@
+ #size-cells = <1>;
+ ranges;
+
++ mmc0: mmc@1c0f000 {
++ compatible = "allwinner,sun50i-a64-mmc";
++ reg = <0x01c0f000 0x1000>;
++ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
++ clock-names = "ahb", "mmc";
++ resets = <&ccu RST_BUS_MMC0>;
++ reset-names = "ahb";
++ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ mmc1: mmc@1c10000 {
++ compatible = "allwinner,sun50i-a64-mmc";
++ reg = <0x01c10000 0x1000>;
++ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
++ clock-names = "ahb", "mmc";
++ resets = <&ccu RST_BUS_MMC1>;
++ reset-names = "ahb";
++ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ mmc2: mmc@1c11000 {
++ compatible = "allwinner,sun50i-a64-emmc";
++ reg = <0x01c11000 0x1000>;
++ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
++ clock-names = "ahb", "mmc";
++ resets = <&ccu RST_BUS_MMC2>;
++ reset-names = "ahb";
++ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
+ usb_otg: usb@01c19000 {
+ compatible = "allwinner,sun8i-a33-musb";
+ reg = <0x01c19000 0x0400>;
diff --git a/target/linux/sunxi/patches-4.9/0020-arm64-allwinner-a64-Add-MMC-pinctrl-nodes.patch b/target/linux/sunxi/patches-4.9/0020-arm64-allwinner-a64-Add-MMC-pinctrl-nodes.patch
new file mode 100644
index 0000000000..f5af0f819a
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0020-arm64-allwinner-a64-Add-MMC-pinctrl-nodes.patch
@@ -0,0 +1,50 @@
+From a3e8f4926248b3c12933aacec4432e9b6de004bb Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Mon, 9 Jan 2017 16:39:15 +0100
+Subject: arm64: allwinner: a64: Add MMC pinctrl nodes
+
+The A64 only has a single set of pins for each MMC controller. Since we
+already have boards that require all of them, let's add them to the DTSI.
+
+Reviewed-by: Andre Przywara <andre.przywara@arm.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
+Acked-by: Chen-Yu Tsai <wens@csie.org>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 25 +++++++++++++++++++++++++
+ 1 file changed, 25 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -243,6 +243,31 @@
+ function = "i2c1";
+ };
+
++ mmc0_pins: mmc0-pins {
++ pins = "PF0", "PF1", "PF2", "PF3",
++ "PF4", "PF5";
++ function = "mmc0";
++ drive-strength = <30>;
++ bias-pull-up;
++ };
++
++ mmc1_pins: mmc1-pins {
++ pins = "PG0", "PG1", "PG2", "PG3",
++ "PG4", "PG5";
++ function = "mmc1";
++ drive-strength = <30>;
++ bias-pull-up;
++ };
++
++ mmc2_pins: mmc2-pins {
++ pins = "PC1", "PC5", "PC6", "PC8", "PC9",
++ "PC10","PC11", "PC12", "PC13",
++ "PC14", "PC15", "PC16";
++ function = "mmc2";
++ drive-strength = <30>;
++ bias-pull-up;
++ };
++
+ uart0_pins_a: uart0@0 {
+ pins = "PB8", "PB9";
+ function = "uart0";
diff --git a/target/linux/sunxi/patches-4.9/0022-arm64-allwinner-pine64-add-MMC-support.patch b/target/linux/sunxi/patches-4.9/0022-arm64-allwinner-pine64-add-MMC-support.patch
new file mode 100644
index 0000000000..c60e5104cf
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0022-arm64-allwinner-pine64-add-MMC-support.patch
@@ -0,0 +1,62 @@
+From ebe3ae29c6314217edf40d9ee23c36d610ff0fb8 Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Tue, 10 Jan 2017 01:22:31 +0000
+Subject: arm64: allwinner: pine64: add MMC support
+
+All Pine64 boards connect an micro-SD card slot to the first MMC
+controller.
+Enable the respective DT node and specify the (always-on) regulator
+and card-detect pin.
+As a micro-SD slot does not feature a write-protect switch, we disable
+this feature.
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Acked-by: Chen-Yu Tsai <wens@csie.org>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 20 ++++++++++++++++++++
+ 1 file changed, 20 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+@@ -44,6 +44,8 @@
+
+ #include "sun50i-a64.dtsi"
+
++#include <dt-bindings/gpio/gpio.h>
++
+ / {
+ model = "Pine64";
+ compatible = "pine64,pine64", "allwinner,sun50i-a64";
+@@ -55,6 +57,13 @@
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
++
++ reg_vcc3v3: vcc3v3 {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc3v3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
+ };
+
+ &ehci1 {
+@@ -71,6 +80,17 @@
+ bias-pull-up;
+ };
+
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins>;
++ vmmc-supply = <&reg_vcc3v3>;
++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
++ cd-inverted;
++ disable-wp;
++ bus-width = <4>;
++ status = "okay";
++};
++
+ &ohci1 {
+ status = "okay";
+ };
diff --git a/target/linux/sunxi/patches-4.9/0023-arm64-allwinner-a64-add-UART1-pin-nodes.patch b/target/linux/sunxi/patches-4.9/0023-arm64-allwinner-a64-add-UART1-pin-nodes.patch
new file mode 100644
index 0000000000..998d51435f
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0023-arm64-allwinner-a64-add-UART1-pin-nodes.patch
@@ -0,0 +1,35 @@
+From e7ba733d32cc9487b62b07219ad911c77764a681 Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Tue, 10 Jan 2017 01:22:32 +0000
+Subject: arm64: allwinner: a64: add UART1 pin nodes
+
+On many boards UART1 connects to a Bluetooth chip, so add the pinctrl
+nodes for the only pins providing access to that UART. That includes
+those pins for hardware flow control (RTS/CTS).
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Acked-by: Chen-Yu Tsai <wens@csie.org>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -272,6 +272,16 @@
+ pins = "PB8", "PB9";
+ function = "uart0";
+ };
++
++ uart1_pins: uart1_pins {
++ pins = "PG6", "PG7";
++ function = "uart1";
++ };
++
++ uart1_rts_cts_pins: uart1_rts_cts_pins {
++ pins = "PG8", "PG9";
++ function = "uart1";
++ };
+ };
+
+ uart0: serial@1c28000 {
diff --git a/target/linux/sunxi/patches-4.9/0024-arm64-allwinner-a64-add-r_ccu-node.patch b/target/linux/sunxi/patches-4.9/0024-arm64-allwinner-a64-add-r_ccu-node.patch
new file mode 100644
index 0000000000..19a3589708
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0024-arm64-allwinner-a64-add-r_ccu-node.patch
@@ -0,0 +1,52 @@
+From 791a9e001d3ba3b552888b0bf3c592a50b71f57e Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.xyz>
+Date: Tue, 4 Apr 2017 17:50:58 +0800
+Subject: arm64: allwinner: a64: add r_ccu node
+
+A64 SoC have a CCU (r_ccu) in PRCM block.
+
+Add the device node for it.
+
+The mux 3 of R_CCU is an internal oscillator, which is 16MHz according
+to the user manual, and has only 30% accuracy based on our experience
+on older SoCs. The real mesaured value of it on two Pine64 boards is
+around 11MHz, which is around 70% of 16MHz.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 17 +++++++++++++++++
+ 1 file changed, 17 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -98,6 +98,14 @@
+ clock-output-names = "osc32k";
+ };
+
++ iosc: internal-osc-clk {
++ #clock-cells = <0>;
++ compatible = "fixed-clock";
++ clock-frequency = <16000000>;
++ clock-accuracy = <300000000>;
++ clock-output-names = "iosc";
++ };
++
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+@@ -389,5 +397,14 @@
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
++
++ r_ccu: clock@1f01400 {
++ compatible = "allwinner,sun50i-a64-r-ccu";
++ reg = <0x01f01400 0x100>;
++ clocks = <&osc24M>, <&osc32k>, <&iosc>;
++ clock-names = "hosc", "losc", "iosc";
++ #clock-cells = <1>;
++ #reset-cells = <1>;
++ };
+ };
+ };
diff --git a/target/linux/sunxi/patches-4.9/0025-arm64-allwinner-a64-add-R_PIO-pinctrl-node.patch b/target/linux/sunxi/patches-4.9/0025-arm64-allwinner-a64-add-R_PIO-pinctrl-node.patch
new file mode 100644
index 0000000000..ff541ce63e
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0025-arm64-allwinner-a64-add-R_PIO-pinctrl-node.patch
@@ -0,0 +1,35 @@
+From ec4279053a6434f685246e022be95d2a62f8c608 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.xyz>
+Date: Tue, 4 Apr 2017 17:51:00 +0800
+Subject: arm64: allwinner: a64: add R_PIO pinctrl node
+
+Allwinner A64 have a dedicated pin controller to manage the PL pin bank.
+As the driver and the required clock support are added, add the device
+node for it.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -406,5 +406,17 @@
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
++
++ r_pio: pinctrl@01f02c00 {
++ compatible = "allwinner,sun50i-a64-r-pinctrl";
++ reg = <0x01f02c00 0x400>;
++ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
++ clock-names = "apb", "hosc", "losc";
++ gpio-controller;
++ #gpio-cells = <3>;
++ interrupt-controller;
++ #interrupt-cells = <3>;
++ };
+ };
+ };
diff --git a/target/linux/sunxi/patches-4.9/0026-arm64-allwinner-a64-add-pmu0-regs-for-USB-PHY.patch b/target/linux/sunxi/patches-4.9/0026-arm64-allwinner-a64-add-pmu0-regs-for-USB-PHY.patch
new file mode 100644
index 0000000000..0d7803775e
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0026-arm64-allwinner-a64-add-pmu0-regs-for-USB-PHY.patch
@@ -0,0 +1,29 @@
+From 0d98479738b950e30bb4f782d60099d44076ad67 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.io>
+Date: Wed, 5 Apr 2017 22:30:34 +0800
+Subject: arm64: allwinner: a64: add pmu0 regs for USB PHY
+
+The USB PHY in A64 has a "pmu0" region, which controls the EHCI/OHCI
+controller pair that can be connected to the PHY0.
+
+Add the MMIO region for PHY node.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -184,8 +184,10 @@
+ usbphy: phy@01c19400 {
+ compatible = "allwinner,sun50i-a64-usb-phy";
+ reg = <0x01c19400 0x14>,
++ <0x01c1a800 0x4>,
+ <0x01c1b800 0x4>;
+ reg-names = "phy_ctrl",
++ "pmu0",
+ "pmu1";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>;
diff --git a/target/linux/sunxi/patches-4.9/0027-arm64-allwinner-a64-Add-PLL_PERIPH0-clock-to-the-R_C.patch b/target/linux/sunxi/patches-4.9/0027-arm64-allwinner-a64-Add-PLL_PERIPH0-clock-to-the-R_C.patch
new file mode 100644
index 0000000000..319dba6591
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0027-arm64-allwinner-a64-Add-PLL_PERIPH0-clock-to-the-R_C.patch
@@ -0,0 +1,32 @@
+From f74994a94063bc85ac1d6ad677ed06b5279c101f Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens@csie.org>
+Date: Wed, 31 May 2017 15:58:24 +0800
+Subject: arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
+
+The AR100 clock within the R_CCU (PRCM) has the PLL_PERIPH0 as one of
+its parents.
+
+This adds the reference in the device tree describing this relationship.
+This patch uses a raw number for the clock index to ease merging by
+avoiding cross tree dependencies.
+
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -403,8 +403,9 @@
+ r_ccu: clock@1f01400 {
+ compatible = "allwinner,sun50i-a64-r-ccu";
+ reg = <0x01f01400 0x100>;
+- clocks = <&osc24M>, <&osc32k>, <&iosc>;
+- clock-names = "hosc", "losc", "iosc";
++ clocks = <&osc24M>, <&osc32k>, <&iosc>,
++ <&ccu 11>;
++ clock-names = "hosc", "losc", "iosc", "pll-periph";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };