aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata1
-rw-r--r--target/linux/ath79/dts/ar9342_ubnt_nanostation-ac-loco.dts40
-rw-r--r--target/linux/ath79/image/generic-ubnt.mk27
4 files changed, 66 insertions, 3 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index e608825fb8..30577a1a9f 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -20,6 +20,7 @@ ath79_setup_interfaces()
tplink,tl-mr3040-v2|\
tplink,tl-wr703n|\
ubnt,bullet-m|\
+ ubnt,nanostation-ac-loco|\
ubnt,rocket-m|\
ubnt,unifiac-lite|\
ubnt,unifiac-mesh|\
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 8ede82c7ce..ec490dda7f 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -111,6 +111,7 @@ case "$FIRMWARE" in
ubnt,unifiac-lite|\
ubnt,unifiac-mesh|\
ubnt,unifiac-mesh-pro|\
+ ubnt,nanostation-ac-loco|\
ubnt,unifiac-pro)
ath10kcal_extract "EEPROM" 20480 2116
;;
diff --git a/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac-loco.dts b/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac-loco.dts
new file mode 100644
index 0000000000..ea6e1cb6a4
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac-loco.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9342_ubnt_wa.dtsi"
+
+/ {
+ compatible = "ubnt,nanostation-ac-loco", "ubnt,wa";
+ model = "Ubiquiti Nanostation AC loco (WA)";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <4>;
+ phy4: ethernet-phy@4 {
+ phy-mode = "rgmii";
+ reg = <4>;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M and 10M */
+ pll-data = <0x06000000 0x00000101 0x00001313>;
+
+ mtd-mac-address = <&eeprom 0x0>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+
+ gmac-config {
+ device = <&gmac>;
+ rxd-delay = <3>;
+ rxdv-delay = <3>;
+ };
+};
diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk
index 4ef9f8de3d..86afa11deb 100644
--- a/target/linux/ath79/image/generic-ubnt.mk
+++ b/target/linux/ath79/image/generic-ubnt.mk
@@ -1,4 +1,4 @@
-DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
+DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION
# mkubntimage is using the kernel image direct
# routerboard creates partitions out of the ubnt header
@@ -10,14 +10,14 @@ define Build/mkubntimage
-o $@
endef
-# all UBNT XM device expect the kernel image to have 1024k while flash, when
+# all UBNT XM/WA devices expect the kernel image to have 1024k while flash, when
# booting the image, the size doesn't matter.
define Build/mkubntimage-split
-[ -f $@ ] && ( \
dd if=$@ of=$@.old1 bs=1024k count=1; \
dd if=$@ of=$@.old2 bs=1024k skip=1; \
$(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
+ -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(VERSION_DIST)-$(REVISION) \
-k $@.old1 \
-r $@.old2 \
-o $@; \
@@ -27,10 +27,12 @@ endef
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
+# UBNT_VERSION e.g. one of (6.0.0, 8.5.0)
define Device/ubnt
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
IMAGE_SIZE := 7552k
UBNT_BOARD := XM
+ UBNT_VERSION := 6.0.0
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | mkubntimage-split
@@ -52,6 +54,15 @@ define Device/ubnt-bz
ATH_SOC := ar7241
endef
+define Device/ubnt-wa
+ $(Device/ubnt)
+ UBNT_TYPE := WA
+ UBNT_CHIP := ar934x
+ UBNT_BOARD := WA
+ UBNT_VERSION := 8.5.0
+ ATH_SOC := ar9342
+endef
+
define Device/ubnt_bullet-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Bullet-M
@@ -73,6 +84,16 @@ define Device/ubnt_nano-m
endef
TARGET_DEVICES += ubnt_nano-m
+define Device/ubnt_nanostation-ac-loco
+ $(Device/ubnt-wa)
+ DEVICE_TITLE := Ubiquiti Nanostation AC loco
+ DEVICE_PACKAGES += kmod-ath10k ath10k-firmware-qca988x
+ IMAGE_SIZE := 15744k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
+endef
+TARGET_DEVICES += ubnt_nanostation-ac-loco
+
define Device/ubnt_unifi
$(Device/ubnt-bz)
DEVICE_TITLE := Ubiquiti UniFi