aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* realtek: fix build issuesBirger Koblitz2021-01-052-4/+19
| | | | | | | This fixes the build problems for the REALTEK target by adding a proper configuration option for the phy module. Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
* tools/fakeroot: update to 1.25.3Syrone Wong2021-01-056-57/+27
| | | | | | | | use PKG_FIXUP:=autoreconf to generate configure 200-hide-dlsym-error.patch deleted due to fixed upstream in another way other patches refreshed to reflect latest changes Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
* ipq806x: fix LED names of TP-Link Talon AD2700Daniel Golle2021-01-051-2/+2
| | | | | | | | While the underscore in the name of the USB LEDs was removed from DTS, /etc/board.d/01_leds also has to reflect that change. Fixes: 28fd279e5d ("ipq806x: some corrections for TP-Link Talon AD7200") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: add support for Ubiquiti UniFi 6 LiteDavid Bauer2021-01-059-76/+478
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- MediaTek MT7621AT 256M DDR3 32M SPI-NOR MediaTek MT7603 2T2R 802.11n 2.4GHz MediaTek MT7915 2T2R 802.11ax 5GHz Not Working ----------- - Bluetooth (connected to UART3) UART ---- UART is located in the lower left corner of the board. Pinout is 0 - 3V3 (don't connect) 1 - RX 2 - TX 3 - GND Console is 115200 8N1. Boot ---- 1. Connect to the serial console and connect power. 2. Double-press ESC when prompted 3. Set the fdt address $ fdt addr $(fdtcontroladdr) 4. Remove the signature node from the control FDT $ fdt rm /signature 5. Transfer and boot the OpenWrt initramfs image to the device. Make sure to name the file C0A80114.img and have it reachable at 192.168.1.1/24 $ tftpboot; bootm Installation ------------ 1. Connect to the booted device at 192.168.1.20 using username/password "ubnt". 2. Update the bootloader environment. $ fw_setenv devmode TRUE $ fw_setenv boot_openwrt "fdt addr \$(fdtcontroladdr); fdt rm /signature; bootubnt" $ fw_setenv bootcmd "run boot_openwrt" 3. Transfer the OpenWrt sysupgrade image to the device using SCP. 4. Check the mtd partition number for bs / kernel0 / kernel1 $ cat /proc/mtd 5. Set the bootselect flag to boot from kernel0 $ dd if=/dev/zero bs=1 count=1 of=/dev/mtdblock4 6. Write the OpenWrt sysupgrade image to both kernel0 as well as kernel1 $ dd if=openwrt.bin of=/dev/mtdblock6 $ dd if=openwrt.bin of=/dev/mtdblock7 7. Reboot the device. It should boot into OpenWrt. Below are the original installation instructions prior to the discovery of "devmode=TRUE". They are not required for installation and are documentation only. The bootloader employs signature verification on the FIT image configurations. This way, booting unauthorized image without patching the bootloader is not possible. Manually configuring the bootcmd in the U-Boot envronment won't work, as this is restored to the default value if modified. The bootloader is made up of three different parts. 1. The SPL performing early board initialization and providing a XModem recovery in case the PBL is missing 2. The PBL being the primary U-Boot application and containing the control FDT. It is LZMA packed with a uImage header. 3. A Ubiquiti standalone U-Boot application providing the main boot routine as well as their recovery mechanism. In a perfect world, we would only replace the PBL, as the SPL does not perform checks on the PBLs integrity. However, as the PBL is in the same eraseblock as the SPL, we need to at least rewrite both. The bootloader will only verify integrity in case it has a "signature" node in it's control device-tree. Renaming the signature node to something else will prevent this from happening. Warning: These instructions are based on the firmware intially shipped with the device and potentially brick your device in a way it can only be recovered using a SPI flasher. Only (!) proceed if you understand this! 1. Extract the bootloader from the U-Boot partition using the OpenWrt initramfs image. 2. Split the bootloader into it's 3 components: $ dd if=bootloader.bin of=spl.bin bs=1 skip=0 count=45056 $ dd if=bootloader.bin of=pbl.uimage bs=1 skip=45056 count=143360 $ dd if=bootloader.bin of=ubnt.uimage bs=1 skip=188416 3. Strip the uImage header from the PBL $ dd if=pbl.uimage of=pbl.lzma bs=64 skip=1 4. Decompress the PBL $ lzma -d pbl.lzma --single-stream The decompressed PBL sha256sum should be d8b406c65240d260cf15be5f97f40c1d6d1b6e61ec3abed37bb841c90fcc1235 5. Open the decompressed PBL using your favorite hexeditor. Locate the control FDT at offset 0x4CED0 (0xD00DFEED). At offset 0x4D5BC, the label for the signature node is located. Rename the "signature" string at this offset to "signaturr". The patched PBL sha256sum should be d028e374cdb40ba44b6e3cef2e4e8a8c16a3b85eb15d9544d24fdd10eed64c97 6. Compress the patched PBL $ lzma -z pbl --lzma1=dict=67108864 The resulting pbl.lzma file should have the sha256sum 7ae6118928fa0d0b3fe4ff81abd80ecfd9ba2944cb0f0a462b6ae65913088b42 7. Create the PBL uimage $ SOURCE_DATE_EPOCH=1607909492 mkimage -A mips -O u-boot -C lzma -n "U-Boot 2018.03 [UniFi,v1.1.40.71]" -a 84000000 -e 84000000 -T firmware -d pbl.lzma patched_pbl.uimage The resulting patched_pbl.uimage should have the sha256sum b90d7fa2dcc6814180d3943530d8d6b0d6a03636113c94e99af34f196d3cf2ce 8. Reassemble the complete bootloader $ dd if=patched_pbl.uimage of=aligned_pbl.uimage bs=143360 count=1 conv=sync $ cat spl.bin > patched_uboot.bin $ cat aligned_pbl.uimage >> patched_uboot.bin $ cat ubnt.uimage >> patched_uboot.bin The resulting patched_uboot.bin should have the sha256sum 3e1186f33b88a525687285c2a8b22e8786787b31d4648b8eee66c672222aa76b 9. Transfer your patched bootloader to the device. Also install the kmod-mtd-rw package using opkg and load it. $ insmod mtd-rw.ko i_want_a_brick=1 Write the patched bootloader to mtd0 $ mtd write patched_uboot.bin u-boot 10. Erase the kernel1 partition, as the bootloader might otherwise decide to boot from there. $ mtd erase kernel1 11. Transfer the OpenWrt sysupgrade image to the device and install using sysupgrade. FIT configurations ------------------ In the future, the MT7621 UniFi6 family can be supported by a single OpenWrt image. config@1: U6 Lite config@2: U6 IW config@3: U6 Mesh config@4: U6 Extender config@5: U6 LR-EA (Early Access - GA is MT7622) Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq806x: some corrections for TP-Link Talon AD7200Daniel Golle2021-01-052-48/+45
| | | | | | | | | | Address most comments made by Adrian Schmutzler on the mailing list. The device name is kept as 'TP-Link Talon AD7200' as that seems to be the marketing name TP-Link chose for that device, it also matches the naming scheme for other TP-Link devices (e.g. 'TP-Link Archer C7'). Fixes: 1a775a4fd0 ("ipq806x: add support for TP-Link Talon AD7200") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: drop clang wrapperKevin Darbyshire-Bryant2021-01-052-21/+1
| | | | | | | clang's gcc emulation does the right thing with -print-file-name now, drop the wrapper Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ipq806x: add support for TP-Link Talon AD7200Gary Cooper2021-01-057-0/+512
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device hardware: https://deviwiki.com/wiki/TP-LINK_AD7200_(Talon) The Talon AD7200 is basically an Archer C2600 with a third PCIe lane and an 802.11ad radio. It looks like the Archers C2600/5400 but the housing is slightly larger. Specifications -------------- - IPQ8064 dual-core 1400MHz - QCA9988 2.4GHz WiFi - QCA9990 5GHz WiFi - QCA9500 60GHz WiFi - 32MB SPI Flash - 512MiB RAM - 5 GBit Ports (QCA8337) Installation ------------ Installation is possible from the OEM web interface. Sysupgrade is possible. TFTP recovery is possible. - Image: AD7200_1.0_tp_recovery.bin Notes - This will be the first 802.11ad device supported by mainline. Signed-off-by: Gary Cooper <gaco@bitmessage.de>
* mac80211: Add wil6210 driverRobert Marko2021-01-051-3/+15
| | | | | | | | | | This patch adds wil6210 driver for Wilocity/QCA based 802.11ad PCI cards. Driver uses cfg80211 and nl80211 but not mac80211. Integration for UCI and LuCI will come in other patches. Signed-off-by: Robert Marko <robimarko@gmail.com>
* linux-firmware: Add wil6210 firmwareRobert Marko2021-01-051-0/+8
| | | | | | | | This patch adds wil6210 firmware and board files. Firmware version is not up to date but is only freely redistributable one I found. Board file is a generic one so most devices and especially those for long distance PtP links will require so in a ipq-wifi like way. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: add 802.11ad-supportGary Cooper2021-01-052-1/+7
| | | | | | This adds logic to properly populate defaults in /etc/config/wireless. Signed-off-by: Gary Cooper <gaco@bitmessage.de>
* hostapd: wpa_supplicant: Enable proper GCMP cipher supportRobert Marko2021-01-052-1/+6
| | | | | | | | | This patch enables hostapd.sh to properly configure wpa_supplicant for when GCMP is used as cipher in station mode. Without this wpa_supplicant will be unable to connect to AP. This is needed for wil6210 as it does not support CCMP. Signed-off-by: Robert Marko <robimarko@gmail.com>
* base-files: wifi: add support for 802.11adDaniel Golle2021-01-052-1/+2
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: update to git HEADDaniel Golle2021-01-051-3/+3
| | | | | | 0c83439 netifd: wireless: default to GCMP WPA cipher on 802.11ad Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* fstools: fix 'firstboot' on unmounted UBIFS overlayDaniel Golle2021-01-041-3/+3
| | | | | | | | | | | The usual OpenWrt-way of writing the JFFS2-marker in order to have a filesystem erased at the next boot fails on UBIFS volumes due to UBI being a different beast when it comes to writing. As truncating a UBIFS volume only takes a few milliseconds and has the desired effect of wiping-out all content of that volume, just do that instead. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: replace which with Bash command built-inPetr Štetiar2021-01-043-4/+4
| | | | | | | | | | | | | | | | | | | | | | | `which` utility is not shipped by default for example on recent Arch Linux and then any steps relying on its presence fails, like for example following Python3 prereq build check: $ python3 --version Python 3.9.1 $ make /bin/sh: line 1: which: command not found /bin/sh: line 1: which: command not found /bin/sh: line 1: which: command not found ... Checking 'python3'... failed. ... Fix this by switching to Bash builtin `command` which should provide same functionality. Fixes: FS#3525 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* odhcpd: bump to latest versionNick Hainke2021-01-041-3/+3
| | | | | | 3bda900 odhcpd: add option for setting preferred lifetime Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: keep DTSI files for D-Link SoC-specificAdrian Schmutzler2021-01-046-8/+62
| | | | | | | | | | | It is good practice to define device tree files based on specific SoCs. Thus, let's not start to create files that are used across different architectures. Duplicate the DTSI file for D-Link DAP-2xxx in order to have one for qca953x and one for qca955x, respectively. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: Fix 02_network setup for D-Link DAP-2660 A1Sebastian Schaper2021-01-041-0/+1
| | | | | | | | | The device is a one-port, but was set up as two-port by the default case in 02_network. Fix it. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net> [commit title/message facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for D-Link DAP-3320 A1Sebastian Schaper2021-01-045-3/+74
| | | | | | | | | | | | | | | | | | | | | Specifications: * QCA9533, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R * 10/100 Ethernet Port, 802.11af PoE * IP55 pole-mountable outdoor case Installation: * Factory Web UI is at 192.168.0.50 login with 'admin' and blank password, flash factory.bin * Recovery Web UI is at 192.168.0.50 connect network cable, hold reset button during power-on and keep it pressed until uploading has started (only required when checksum is ok, e.g. for reverting back to oem firmware), flash factory.bin After flashing factory.bin, additional free space can be reclaimed by flashing sysupgrade.bin, since the factory image requires some padding to be accepted for upgrading via OEM Web UI. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
* ath79: add support for D-Link DAP-2680 A1Sebastian Schaper2021-01-046-2/+113
| | | | | | | | | | | | | | | | | | | | | Specifications: * QCA9558, 16 MiB Flash, 256 MiB RAM, 802.11n 3T3R * QCA9984, 802.11ac Wave 2 3T3R * Gigabit LAN Port (AR8035), 802.11at PoE Installation: * Factory Web UI is at 192.168.0.50 login with 'admin' and blank password, flash factory.bin * Recovery Web UI is at 192.168.0.50 connect network cable, hold reset button during power-on and keep it pressed until uploading has started (only required when checksum is ok, e.g. for reverting back to oem firmware), flash factory.bin After flashing factory.bin, additional free space can be reclaimed by flashing sysupgrade.bin, since the factory image requires some padding to be accepted for upgrading via OEM Web UI. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
* ath79: add support for D-Link DAP-2230 A1Sebastian Schaper2021-01-045-0/+73
| | | | | | | | | | | | | | | | | | | | Specifications: * QCA9533, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R * 10/100 Ethernet Port, 802.11af PoE Installation: * Factory Web UI is at 192.168.0.50 login with 'admin' and blank password, flash factory.bin * Recovery Web UI is at 192.168.0.50 connect network cable, hold reset button during power-on and keep it pressed until uploading has started (only required when checksum is ok, e.g. for reverting back to oem firmware), flash factory.bin After flashing factory.bin, additional free space can be reclaimed by flashing sysupgrade.bin, since the factory image requires some padding to be accepted for upgrading via OEM Web UI. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
* x86/efi: add FAT32 esp mounting supportKagurazaka Kotori2021-01-031-1/+6
| | | | | | | | | Adds a new function get_magic_fat32() in base-files to read FAT32 magic. Now FAT32 EFI system partition can be handled in the same way as FAT12/FAT16. Signed-off-by: Kagurazaka Kotori <kagurazakakotori@gmail.com> [replace '-o' with '] || [' to satisfy shellsheck] Signed-off-by: Paul Spooren <mail@aparcar.org>
* usbutils: removeRosen Penev2021-01-031-60/+0
| | | | | | | | This package is not needed in base. It will be imported in the packages feed. Signed-off-by: Rosen Penev <rosenp@gmail.com> Acked-by: Paul Spooren <mail@aparcar.org>
* usbreset: remove redundant packagePaul Spooren2021-01-032-275/+0
| | | | | | | | | The package `usbutils` already offers an USB reset function, this package is therefore not really required standalone. CC: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Paul Spooren <mail@aparcar.org>
* hostapd: add support for custom per-BSS optionsFlorian Beverborg2021-01-032-1/+8
| | | | | | | | | | | | This adds an option "hostapd_bss_options" that does the same as "hostapd_options" but on a per-BSS level, instead of a per-device level. This can be used, for example, to configure different per-devce sae_passwords per BSS or to augment some of the existing per-BSS options. Signed-off-by: Florian Beverborg <flo@beverb.org> [remove whitespace errors, bump release] Signed-off-by: Paul Spooren <mail@aparcar.org>
* ipq806x: consolidate DTS files directorySungbo Eo2021-01-031-0/+0
| | | | | | | | | Commit 29ca10e537ee ("ipq806x: remove support for kernel 4.19") moved DTS files to "files" directory, but after that a new DTS file was added to the former "files-5.4" directory. Move it to the new directory. Fixes: 98b86296e67d ("ipq806x: add support for ASRock G10") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* mediatek: remove unnecessary execute permission bitSungbo Eo2021-01-031-0/+0
| | | | | | | | | Kernel config does not need to be executable. 644 is enough. Fixes: 25d9df670b85 ("mediatek: add v5.4 support") Signed-off-by: Sungbo Eo <mans0n@gorani.run> [split by targets] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: remove unnecessary execute permission bitSungbo Eo2021-01-031-0/+0
| | | | | | | | | DTS files do not need to be executable. 644 is enough. Fixes: 0fbdb51f7643 ("ipq40xx: add Edgecore OAP-100 support") Signed-off-by: Sungbo Eo <mans0n@gorani.run> [split by targets] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix ethernet-phy label for dlink,dap-2660-a1Adrian Schmutzler2021-01-031-3/+3
| | | | | | | | The phy label/node name should correspond to the reg property. While at it, use more common decimal notation for reg property itself. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mac80211: replace legacy minstrel with minstrel_ht, improve rate selectionFelix Fietkau2021-01-038-0/+2586
| | | | | | | Legacy minstrel is essentially unmaintained and was showing poor performance Replace it with minstrel_ht and improve rate selection and sampling behavior Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wolfssl: enable HAVE_SECRET_CALLBACKFelix Fietkau2021-01-021-0/+10
| | | | | | Fixes wpad-wolfssl build Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/qemustart: use squashfs instead of ext4Paul Spooren2021-01-011-1/+1
| | | | | | | | | The qemustart script currently picks the ext4 filesystem rather than squashfs, while the latter is default for nearly all OpenWrt targets. Change the default behaviour of qemustart to be in line with the rest. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: use CCACHE_DIR for ccache directorySven Wegener2021-01-011-1/+1
| | | | | | It is being set by rules.mk with the same expression. Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
* wolfssl: Fix hostapd build with wolfssl 4.6.0Hauke Mehrtens2021-01-011-0/+25
| | | | | | | | | | | | This fixes the following build problem in hostapd: mipsel-openwrt-linux-musl/bin/ld: /builder/shared-workdir/build/tmp/ccN4Wwer.ltrans7.ltrans.o: in function `crypto_ec_point_add': <artificial>:(.text.crypto_ec_point_add+0x170): undefined reference to `ecc_projective_add_point' mipsel-openwrt-linux-musl/bin/ld: <artificial>:(.text.crypto_ec_point_add+0x18c): undefined reference to `ecc_map' mipsel-openwrt-linux-musl/bin/ld: /builder/shared-workdir/build/tmp/ccN4Wwer.ltrans7.ltrans.o: in function `crypto_ec_point_to_bin': <artificial>:(.text.crypto_ec_point_to_bin+0x40): undefined reference to `ecc_map' Fixes: ba40da9045f7 ("wolfssl: Update to v4.6.0-stable") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq806x: reenable CONFIG_CMDLINE_OVERRIDE and ASRock G10Pawel Dembicki2021-01-012-2/+1
| | | | | | | | | | This reverts commit 57e4cc8261ca6f0b32e4da6922a8f52ef82c4dc6. Cmdline override patch was fixed. It's time for reenable Asrock G10 support. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Tested-by: Hannu Nyman <hannu.nyman@iki.fi> (run-tested for R7800)
* ipq806x: fix 900-arm-add-cmdline-override.patchPawel Dembicki2021-01-011-11/+11
| | | | | | | | | | | | 900-arm-add-cmdline-override.patch have missplaced entry in arch/arm/Kconfig file. It causes problem with other cmdline patches. This patch put Kconfig entry in correct place. Fixes: 98b86296e67d ("ipq806x: add support for ASRock G10") Suggested-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Tested-by: Hannu Nyman <hannu.nyman@iki.fi> (run-tested for R7800)
* build: drop ccache variables from specific targetsSven Wegener2021-01-012-6/+0
| | | | | | | With commit 2ca084cc ("build: improve ccache support") these variables are being set globally and we don't need them for specific targets. Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
* libevent2: trigger rebuild on libevent2-pthreadsAlexandru Ardelean2021-01-011-0/+1
| | | | | | | | | | | | | The symbol determines if the libevent2-pthreads libraries get built or not. If we want to select libevent2-pthreads, and these haven't been built, an error will occur mentioning that there are no 'libevent_pthreads-2.1.so' files. Adding CONFIG_PACKAGE_libevent2-pthreads to PKG_CONFIG_DEPEND will make sure that the libraries get re-built in case libevent2-pthreads is selected. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* base-files: allow reusing of boolean value extraction logicOldřich Jedlička2021-01-012-6/+13
| | | | | | | | | | | | | | | | | | | The `functions.sh` script has `config_get_bool()` function, which is usable when using UCI config direct access API, but there is no equivalent for the callback API. Introduce `get_bool()` function to allow reusing it from init scripts. Example: ```sh option_cb() { local option="$1" local value="$(get_bool "$2")" ... } ``` Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
* kernel/modules: remove fake users from udptunnel{4,6}Rui Salvaterra2021-01-011-6/+2
| | | | | | | | | | Since we're now able to select CONFIG_NET_UDP_TUNNEL at will, drop the fake dependencies. This is a partial revert of commit d7e040f8bccec06b64c82963be6435101423dbf1 "kernel: add fake users for udptunnel and iptunnel modules". Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel/hack-5.4: make UDP tunneling user-selectableRui Salvaterra2021-01-011-0/+11
| | | | | | | | | | | | | UDP tunneling support isn't user-selectable, but it's required by WireGuard which is, for the time being, an out-of-tree module. We currently work around this issue by selecting an unrelated module which depends on UDP tunnelling (VXLAN). This is inconvenient, as it implies this unrelated module needs to be built-in when doing a monolithic build. Fix this inconvenience by making UDP tunneling user-selectable in the kernel configuration. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel-build: fix STRIP_KERNEL_EXPORTS for 64-bit kernelsRui Salvaterra2021-01-011-1/+1
| | | | | | | | | | | While parsing the nm output, we need to account for the fact that 64-bit kernels have 64-bit wide addresses. While at it, replace the grep | sed combo with a single awk invocation and a stronger regex. Fixes: 2ef0acc5fcda557fa5aaad35d27cb8cf75be96d2 "kernel-build: fix STRIP_KERNEL_EXPORTS for recent kernels" Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* cryptodev-linux: bump to 1.11, fix build against kernel 5.10.Stijn Segers2021-01-013-53/+35
| | | | | | | This patch bumps cryptodev-linux to the latest stable release (1.11) and fixes compilation against the next LTS (and likely OpenWrt) kernel 5.10. Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* trace-cmd: update to 2.9.1Rosen Penev2021-01-014-39/+121
| | | | | | | | | | | Fixed license information. Adjusted Makefile to new install paths. Backported upstream patch to fix compilation with musl. Replaces local and incomplete patch. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ppp: Remove already applied patchHauke Mehrtens2021-01-012-14/+1
| | | | | | | This patch was already applied upstream and not needed here. Fixes: 06403981e1f2 ("ppp: update to version 2.4.7.git-2019-05-06") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wolfssl: Update to v4.6.0-stableEneas U de Queiroz2021-01-014-154/+4
| | | | | | | | | | | | | | | | | This version fixes a large number of bugs, although no security vulnerabilities are listed. Full changelog at: https://www.wolfssl.com/docs/wolfssl-changelog/ or, as part of the version's README.md: https://github.com/wolfSSL/wolfssl/blob/v4.6.0-stable/README.md Due a number of API additions, size increases from 374.7K to 408.8K for arm_cortex_a9_vfpv3-d16. The ABI does not change from previous version. Backported patches were removed; remaining patch was refreshed. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* ath79: drop upstreamed patchDavid Bauer2021-01-012-71/+7
| | | | | | | | This patch was backported to the 5.4 kernel tree as commit c2d5c4df27e0 at least since release v5.4.28. Since then, it enables RX an TX ready override twice. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 5.4 to 5.4.86Adrian Schmutzler2021-01-0131-115/+47
| | | | | | | | | | | | | | | | | Removed upstreamed patches: pending-5.4/499-mtd-parser-cmdline-Fix-parsing-of-part-names-with-co.patch Manually merged: pending-5.4/611-netfilter_match_bypass_default_table.patch layerscape/302-dts-0112-arm64-dts-fsl-ls1028a-prepare-dts-for-overlay.patch Build-tested: ipq806x/R7800, bcm27xx/bcm2711, ath79/{generic,tiny}, ipq40xx, octeon, ramips/mt7621, realtek, x86/64 Run-tested: ipq806x/R7800, realtek Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: John Audia <graysky@archlinux.us> Tested-by: Stijn Segers <foss@volatilesystems.org>
* iproute2: update to 5.10.0Russell Senior2021-01-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | c8faeca5 (ss: mptcp: fix add_addr_accepted stat print, 2020-11-18) 0d78e8ea (tc: pedit: fix memory leak in print_pedit, 2020-12-11) ec1346ac (devlink: fix memory leak in cmd_dev_flash(), 2020-12-11) 309e6027 (man: tc-flower: fix manpage, 2020-12-11) 376367d9 (uapi: merge in change to bpf.h, 2020-12-14) 2e80ae89 (Merge branch 'gcc-10' into main, 2020-12-03) 755b1c58 (tc/mqprio: json-ify output, 2020-12-02) 975c4944 (ip/netns: use flock when setting up /run/netns, 2020-11-27) fb054cb3 (uapi: update devlink.h, 2020-11-29) c95d63e4 (uapi: update devlink.h, 2020-11-29) cae2e929 (f_u32: fix compiler gcc-10 compiler warning, 2020-11-29) c0149839 (misc: fix compiler warning in ifstat and nstat, 2020-11-29) 2319db90 (tc: fix compiler warnings in ip6 pedit, 2020-11-29) 5bdc4e91 (bridge: fix string length warning, 2020-11-29) f8176999 (devlink: fix uninitialized warning, 2020-11-29) 7a49ff9d (bridge: report correct version, 2020-11-15) 8682f588 (tc-mpls: fix manpage example and help message string, 2020-11-02) 7c7a0fe0 (tc-vlan: fix help and error message strings, 2020-11-02) 72f88bd4 (uapi: update kernel headers from 5.10-rc2, 2020-11-08) b90c39be (rdma: fix spelling error in comment, 2020-11-08) c8424b73 (man: fix spelling errors, 2020-11-08) cbf64817 (tc/m_gate: fix spelling errors, 2020-11-08) 14b189f0 (uapi: updates from 5.10-rc1, 2020-11-03) 9fc5bf73 (libnetlink: define __aligned conditionally, 2020-10-26) eb12cc9a (Merge branch 'main' into next, 2020-10-25) f1298d76 (m_mpls: test the 'mac_push' action after 'modify', 2020-10-22) 2b7a7684 (Merge branch 'tipc-encryption' into next, 2020-10-20) 2bf1ba5a (tipc: add option to set rekeying for encryption, 2020-10-16) 5fb36818 (tipc: add option to set master key for encryption, 2020-10-16) b4edd6a8 (Merge branch 'tc-mpls-l2-vpn' into next Guillaume Nault says:, 2020-10-20) 02a261b5 (m_mpls: add mac_push action, 2020-10-19) d61167dd (m_vlan: add pop_eth and push_eth actions, 2020-10-19) 3342688a (devlink: display elapsed time during flash update, 2020-10-14) cb7ce51c (v5.9.0, 2020-10-15) b5a583fb (Merge branch 'main' into next Signed-off-by: David Ahern <dsahern@gmail.com>, 2020-10-11) 78120128 (genl: ctrl: print op -> policy idx mapping, 2020-10-03) 91c54917 (Merge branch 'bridge-igmpv3-mldv2' into next Nikolay Aleksandrov says:, 2020-10-11) 86588450 (bridge: mdb: print protocol when available, 2020-10-08) 2de81d1e (bridge: mdb: print source list when available, 2020-10-08) 1d28c480 (bridge: mdb: print filter mode when available, 2020-10-08) e331677e (bridge: mdb: show igmpv3/mldv2 flags, 2020-10-08) f94e8b07 (bridge: mdb: print fast_leave flag, 2020-10-08) 547b3197 (bridge: mdb: add support for source address, 2020-10-08) f905191a (Update kernel headers, 2020-10-11) 4322b13c (ip xfrm: support setting XFRMA_SET_MARK_MASK attribute in states, 2020-10-02) 8dc1db80 (devlink: Add health reporter test command support, 2020-10-01) 01216471 (devlink: support setting the overwrite mask attribute, 2020-09-30) 34be2d26 (Update kernel headers, 2020-10-07) d2be31d9 (ss: add support for xdp statistics, 2020-09-24) f481515c (Update kernel headers, 2020-09-29) b8663da0 (ip: promote missed packets to the -s row, 2020-09-16) cec67df9 (Merge branch 'devlink-controller-external-info' into next Parav Pandit says:, 2020-09-22) 748cbad3 (devlink: Show controller number of a devlink port, 2020-09-18) 8fadd011 (devlink: Show external port attribute, 2020-09-18) 454429e8 (Update kernel headers, 2020-09-22) ad34d5fa (iproute2: ss: add support to expose various inet sockopts, 2020-08-19) c8eb4b52 (Update kernel headers, 2020-09-08) abee772f (tipc: support 128bit node identity for peer removing, 2020-08-27) 6fd53b2a (iplink: add support for protodown reason, 2020-08-28) af27494d (ip xfrm: support printing XFRMA_SET_MARK_MASK attribute in states, 2020-08-28) 275eed9b (Merge branch 'main' into next, 2020-09-01) cc889b82 (genl: ctrl: support dumping netlink policy, 2020-08-24) d5acae24 (libnetlink: add nl_print_policy() helper, 2020-08-24) 784fa9f6 (libnetlink: add rtattr_for_each_nested() iteration macro, 2020-08-24) OpenWrt patches unchanged. Successfully built for ramips/mt7621 and x86/geode with: CONFIG_PACKAGE_devlink=m CONFIG_PACKAGE_genl=m CONFIG_PACKAGE_ip-bridge=m CONFIG_PACKAGE_ip-full=m CONFIG_PACKAGE_ip-tiny=m CONFIG_PACKAGE_nstat=m CONFIG_PACKAGE_rdma=m CONFIG_PACKAGE_ss=m CONFIG_PACKAGE_tc=m Minimally run-tested ip-tiny on ramips/mt7621 (ubnt-erx). Signed-off-by: Russell Senior <russell@personaltelco.net>
* tools/fakeroot: remove undefined symbol messagesSven Wegener2020-12-312-0/+33
| | | | | | | | | | | | | | | | glibc started to return errors from dlerror() for dlsym() lookup failures which results in a lot of messages from fakeroot like dlsym(acl_get_fd): staging_dir/host/lib/libfakeroot.so: undefined symbol: acl_get_fd dlsym(acl_get_file): staging_dir/host/lib/libfakeroot.so: undefined symbol: acl_get_file dlsym(acl_set_fd): staging_dir/host/lib/libfakeroot.so: undefined symbol: acl_set_fd when building OpenWrt using a recent glibc. Use the patch from the upstream Debian package to silence these messages. Link: https://bugs.debian.org/830912 Fixes: FS#3393 Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 04:59:04 +0000