aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: fix MikroTik 750Gr3 ports MAC addressesDENG Qingfang2020-04-282-4/+9
| | | | | | | | | | | | | | | According to a user in OpenWrt forum, on RouterOS the MAC addresses are ether1(WAN) = MAC ether2(LAN2) = MAC+1 ether3(LAN3) = MAC+2 etc. Fix the MAC addresses in OpenWrt. Ref: https://forum.openwrt.org/t/few-dumb-question-about-mt7530-rb750gr3-dsa/61608 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [remove label_mac in 02_network] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath10k-ct-firmware: add htt-mgt variantsÁlvaro Fernández Rojas2020-04-281-1/+154
| | | | | | | | | | | For wave-2, there is now a new variant: htt-mgt-community (vs the old full-htt-mgt-community). The non-full one (hence forth 'diet') compiles out a lot of firmware features that ath10k does not use. This saves a lot of resources and lets one configure more stations/vdevs/etc using fwcfg. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-ct-firmware: update firmware imagesÁlvaro Fernández Rojas2020-04-281-26/+26
| | | | | | No release notes this time. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-ct-firmware: rename ct-htt packagesÁlvaro Fernández Rojas2020-04-282-66/+66
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-firmware: move CT firmwares to new packageÁlvaro Fernández Rojas2020-04-282-446/+524
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-ct: remove old patchesÁlvaro Fernández Rojas2020-04-2813-2300/+651
| | | | | | Only keep 5.4 patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* elfutils: powerpc build fixLuiz Angelo Daros de Luca2020-04-281-0/+34
| | | | | | | | | | | | | | Fixes following build error on mpc85xx/generic: ppc_initreg.c: In function 'ppc_set_initial_registers_tid': ppc_initreg.c:79:22: error: field 'r' has incomplete type struct pt_regs r; Ref: FS#2924 Fixes: d27623b54254 ("elfutils: update to 0.179") Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> [commit description facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* wireless-regdb: backport three upstream fixesPetr Štetiar2020-04-284-0/+935
| | | | | | | | Another release is overdue for quite some time, so I'm backporting three fixes from upstream which I plan to backport into 19.07 as well. Ref: FS#2880 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* omap: remove support for kernel 4.14Andre Heider2020-04-281-740/+0
| | | | | | There's support for 5.4 and 4.19 now, remove the 3rd option. Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: switch to kernel 5.4Andre Heider2020-04-281-1/+1
| | | | | | | | Runtime tested on beagleblack. Signed-off-by: Andre Heider <a.heider@gmail.com> [added test comment] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* omap: make kernel_oldconfigAndre Heider2020-04-281-56/+52
| | | | | | Attempt to keep the same nand/sound/panel functionality using new knobs. Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: copy kernel 4.19 config for 5.4Andre Heider2020-04-281-0/+763
| | | | Signed-off-by: Andre Heider <a.heider@gmail.com>
* ath79: indicate boot/failsafe/upgrade for NanoBeam/Nanostation ACAdrian Schmutzler2020-04-272-2/+14
| | | | | | | | Like for Ubiquiti PowerBeam 5AC Gen2, the highest RSSI LED can be exploited to indicate boot/failsafe/upgrade for the NanoBeam AC and Nanostation AC as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for Ubiquiti PowerBeam 5AC Gen2Roger Pueyo Centelles2020-04-275-2/+80
| | | | | | | | | | | | | | | | | | | | | | | | The Ubiquiti PowerBeam 5AC Gen 2 (PBE-5AC-Gen2) is an outdoor 802.11ac 5 GHz bridge with a radio feed and a dish antenna. The device is hardware-compatible with the LiteBeam AC Gen2, plus the 4 extra LEDs. Specifications: - SoC: Qualcomm Atheros AR9342 rev 2 - RAM: 64 MB DDR2 - Flash: 16 MB SPI NOR (mx25l12805d) - Ethernet: 1x 10/100/1000 Mbps Atheros 8035, 24 Vdc PoE-in - WiFi 5 GHz: QCA988x HW2.0 Ubiquiti target 0x4100016c chip_id 0x043222ff - WiFi 2.4 GHz: Atheros AR9340 (SoC-based) - Buttons: 1x (reset) - LEDs: 1x power, 1x Ethernet, 4x RSSI via GPIO. All blue. - UART: not tested Installation from stock airOS firmware: - Follow instructions for WA-type Ubiquiti devices on OpenWrt wiki Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> [changed device name in commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: rt3883: remove swconfig from individual DEVICE_PACKAGESAdrian Schmutzler2020-04-272-9/+6
| | | | | | | | | In rt3883 subtarget, several devices add swconfig to their DEVICE_PACKAGES. This is redundant as the package is already provided via DEFAULT_PACKAGES. Remove the redundant inclusions. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: remove (kmod-)swconfig DEVICE_PACKAGES for Sitecom WL-351Adrian Schmutzler2020-04-271-1/+1
| | | | | | | | These definitions are not required since swconfig is selected for the target anyway and kmod-swconfig is pulled as dependency by kmod-switch-rtl8366rb. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: explicitly disable built-in switch for lan-only devicesSungbo Eo2020-04-273-5/+5
| | | | | | | | | Commit 8f6334eb947a ("ramips: explicitly disable built-in switch when needed") did not fix rt288x and rt3883 devices. This patch deals with them. While at it, consolidate duplicate cases in interface setup. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: create common definition for I-O DATA NAND devicesAdrian Schmutzler2020-04-271-23/+11
| | | | | | | | Three of the I-O DATA devices with NAND flash share a lot of variables. Create a common definition for them to reduce duplicate code. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: fix compile error caused by upstreamed mtk_m32 functionYong-hyu, Ban2020-04-271-23/+17
| | | | | | | | | | | | | | | | | | | | This fixes following compile error: ``` CC drivers/net/ethernet/mediatek/mtk_eth_soc.o drivers/net/ethernet/mediatek/mtk_eth_soc.c:70:5: error: conflicting types for 'mtk_m32' u32 mtk_m32(struct mtk_eth *eth, u32 mask, u32 set, unsigned reg) ^~~~~~~ In file included from drivers/net/ethernet/mediatek/mtk_eth_soc.c:25: drivers/net/ethernet/mediatek/mtk_eth_soc.h:964:6: note: previous declaration of 'mtk_m32' was here void mtk_m32(struct mtk_eth *eth, u32 clear, u32 set, unsigned reg); ^~~~~~~ ``` which caused by 5.4.34 mainlining of mtk_m32 function. Fixes: faf668be354a ("kernel: bump 5.4 to 5.4.34") Signed-off-by: Yong-hyu, Ban <perillamint@quendi.moe>
* mt76: update to the latest versionFelix Fietkau2020-04-272-33/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bef8f8a5966d mt76: mt7615: remove a stray if statement 89bd7199487f mt76: remove variable 'val' set but not used ee8ac234b84e mt76: mt7615: introduce mt7615_mcu_fill_msg 4999db4668f0 mt76: mt7615: introduce mt7615_mcu_wait_response 8ce6e40eba03 mt76: mt7615: cleanup fw queue just for mmio devices 9d1d2ee9add3 mt76: mt7615: introduce mt7615_init_device routine 7fbd2a57cea4 mt76: always init to 0 mcu messages 3b277cf18d95 mt76: mt7615: introduce mt7615_mcu_send_message routine 2a4132a55a4f mt76: mt7615: add mt7615_mcu_ops data structure 9ba71749a122 mt76: mt7615: move mt7615_mcu_set_bmc to mt7615_mcu_ops 2e991f3e8cdd mt76: mt7615: move mt7615_mcu_set_sta in mt7615_mcu_ops 56852057cb90 mt76: mt7615: rely on skb API for mt7615_mcu_set_eeprom 642ecd978887 mt76: mt7615: rework mt7615_mcu_set_bss_info using skb APIs 2b0810af4a52 mt76: mt7615: move more mcu commands in mt7615_mcu_ops data structure 7a6285e63d88 mt76: mt7615: introduce MCU_FW_PREFIX for fw mcu commands e536b42ebc7d mt76: mt7615: introduce mt7615_register_map fccbdb628ffd mt76: mt7615: add mt7663e support to mt7615_reg_map d42244e9255c mt76: mt7615: add mt7663e support to mt7615_{driver,firmware}_own aebbe088127f mt76: mt7615: add mt7663e support to mt7615_mcu_set_eeprom 28e22d07f892 mt76: mt7615: introduce mt7615_eeprom_parse_hw_band_cap routine 167428592647 mt76: mt7615: introduce mt7615_init_mac_chain routine 23ca7acfc856 mt76: mt7615: introduce uni cmd command types c4171728cf70 mt76: mt7615: introduce set_bmc and st_sta for uni commands 9e5c76d2310a mt76: mt7615: add more uni mcu commands 779b2cebc147 mt76: mt7615: introduce set_ba uni command 21ee7da00f0a mt76: mt7615: get rid of sta_rec_wtbl data structure 2097f74f664c mt76: mt7615: introduce mt7663e support 8e9cd01228d0 mt7615: sync Kconfig with upstream 3b4f93840950 mt76: add memory barrier to DMA queue kick 8d301ace8ed7 mt76: mt7615: fix mt7663e firmware struct endianness 9bc1850ce711 mt76: mt7615: fix endianness in unified command a1b9b7d94aa0 mt76: mt7615: add missing declaration in mt7615.h 6e4b2a709fe7 mt76: sync Makefile with upstream 258dfb6afb30 mt76: mt76x02u: Add support for newer versions of the XBox One wifi adapter 9c3d84b62cc0 mt76: mt76x2u: introduce Mercury UD13 support ea8ea71933ca mt76: mt76x0: pci: add mt7610 PCI ID 9d555f82d329 mt76: mt7615: modify mt7615_ampdu_stat_read for each phy 8bd26d6c3172 mt76: mt7615: enable aggr_stats for both phy 1315afa511e0 mt76: mt7615: cleanup mib related defines and structs 072b50c61e0e mt76: mt7615: add more useful Tx mib counters b23ff3e9343a mt76: mt7663: fix mt7615_mac_cca_stats_reset routine 294abe47c9b2 mt76: mt7663: enable nf estimation d2d7bf2243f6 mt76: mt7615: make scs configurable per phy 908a2cfab88f mt76: mt7663: disable RDD commands eaef0a268b95 mt76: mt7615: add ethool support to mt7663 driver 96e07ef1113d mt76: mt7615: introduce mt7615_mcu_set_channel_domain mcu command 67182f36e3be mt76: mt7663: keep Rx filters as the default e6a3f3ffe53a mt76: mt7615: introduce hw scan support 12ecd5ba2146 mt76: mt7615: introduce scheduled scan support f6ab0bee3172 mt76: mt7615: introduce BSS absence event f208a9430044 mt76: mt7615: introduce rlm tlv in bss_info mcu command ea4f4d216dbe mt76: mt7615: remove unnecessary register operations 72c9380e70f9 mt76: add headroom and tailroom to mt76_mcu_ops data structure 63e14669e09d mt76: mt7615: introduce mt7663u support to mt7615_write_txwi 29d359ac7626 mt76: mt7615: introduce mt7615_mac_update_rate_desc routine 1f1dd2cb5b49 mt76: mt7615: introduce __mt7663_load_firmware routine cb6dcfd3cf13 mt76: mt7615: move mt7615_mac_wtbl_addr in mac.h d28e8e7ef912 mt76: mt76u: rely on mt7622 queue scheme for mt7663u f78cf8957aba mt76: mt7615: rework wtbl key configuration 2829497aaaf5 mt76: mt7615: introduce mt7615_wtbl_desc data structure 02c9ec4a15e7 mt76: mt7615: add address parameter to mt7615_eeprom_init e9c640c0a79e mt76: mt7663: correct the name of the rom patch 1e8b2fe5ab03 mt76: mt7615: do not always reset the dfs state setting the channel ec0ea46dacf9 mt76: mt7615: Delete an error message in mt7622_wmac_probe() d16a4698f1ac mt76: mt7615: disable merge of OTP ROM data by default 2b58998bb594 mt76: mt7615: add support for applying DC offset calibration from EEPROM 55198aafb756 mt76: mt7615: add support for applying tx DPD calibration from EEPROM 5a1eaa38d380 mt76: mt7603: disable merge of OTP ROM data by default bf60f43b12fb mt76: mt76x2: disable merge of OTP ROM data by default 9406eb1d110f mt76: mt7615: fix endian issues in applying flash calibration data 66d00b8c9dac mt76: mt7615: fix possible division by 0 in mt7615_mac_update_mib_stats 25d812dddcf8 mt76: mt7663: fix aggr range entry in debugfs 08b8bd2bc915 mt76: mt7615: disable hw/sched scan ops for non-offload firmware 8fb1cd20a776 mt76: mt7615: set hw scan limits only for firmware with offload support 05b23d7478fe mt76: mt7615: rework IRQ handling to prepare for MSI support b92c0d576769 mt76: mt7622: fix DMA unmap length 03daa60ca69c mt76: mt7663: fix DMA unmap length 5f2f676b1f01 mt76: mt7615: enable MSI by default 5822911f8026 mt76: remove unnecessary annotations a7035bce8517 mt76: mt7615: fix possible deadlock in mt7615_stop d4e6e225bc06 mt76: mt7615: move core shared code in mt7615-common module 94827d2033c7 mt76: mt7615: introduce mt7663u support 36591dd35f91 mt76: mt7615: enable scs for mt7663 driver bd80144cb5be mt76: mt7615: disable aspm by default 9dcb60b78ede mt76: mt7615: provide aid info to the mcu 6e443e89cce2 mt76: remove PS_NULLFUNC_STACK capability ea133325faa6 mt76: mt7663: introduce 802.11 PS support in sta mode ff3869b38cf2 mt76: mt7615: make Kconfig entry obvious for MT7663E 01fd34f3a6c5 mt76: mt7615: fix sta ampdu factor for VHT e5adbb2077e2 mt76: fix A-MPDU density handling d73e3a23a54e mt76: mt7615: use larger rx buffers if VHT is supported 257319e9b07d mt76: mt7615: never use an 802.11b CF-End rate on 5GHz 29a92c5606d6 mt76: mt7603: never use an 802.11b CF-End rate on 5GHz c0b19ac97c07 mt76: mt7615: adjust timing in mt7615_mac_set_timing to match fw/hw values 1656882f2723 mt76: mt7615: do not adjust MAC timings if the device is not running 4e7ce907faf3 mt76: mt7615: fix tx status rate index calculation 8304b3866100 mt76: mt7603: fix tx status rate index calculation 722d1f47d8ba mt76: add rx queues info to mt76 debugfs da329ef776b0 mt76: mt7615: parse mcu return code for unified commands facf74fd506f mt76: mt7615: fix mt7615_firmware_own for mt7663e e910787a9888 mt76: mt7615: fix max wtbl size for 7663 c9821f7d6a8c mt76: mt7615: fix mt7615_driver_own routine e35cc532c3d2 mt76: mt7615: fix aid configuration in mt7615_mcu_wtbl_generic_tlv b6cb91a71fe1 mt76: mt7615: rework mt7615_mac_sta_poll for usb code b193dd8100f8 mt76: mt7663u: enable AirTimeFairness 31cffa98920f mt76: mt7615: move mcu bss upload before creating the sta cde3716aa47e mt76: enable TDLS support 1846da5dd417 mt76: mt7615: set spatial extension index 6aaf0299730f mt76: mt7615: fix endian issues in dcoc/txdpd calibration 5de75b745cf9 mt76: mt7663: fix up BMC entry indicated to unicmd firmware a5f394c5ca48 mt76: mt7615: add sta pointer to mt7615_mcu_add_bss_info signature 1f2f3dda76b9 mt76: mt7615: fix event report in mt7615_mcu_bss_event c2a3cced36de mt76: mt76x0: enable MCS 8 and MCS9 1afabe78cfc5 mt76: mt7663: add the possibility to load firmware v2 5f3ccc722627 mt76: mt7663: remove check in mt7663_load_n9 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: use lzma-loader for I-O DATA mt7621 devicesINAGAKI Hiroshi2020-04-271-0/+6
| | | | | | | | | | | | | | | | | | The official sysupgrade images for I-O DATA devices manufactured by MSTC (MitraStar Technology Corp.) cannot be booted normally and the kernel panics after switching to kernel 5.4. This commit fixes the issue by using lzma-loader. Note: These devices use Z-LOADER to read the kernel from NAND flash and boot it. Z-LOADER cannot load and start plain lzma-loader, so additional lzma-compression is needed. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Co-developed-by: Yanase Yuki <dev@zpc.sakura.ne.jp> Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp> Tested-by: Yanase Yuki <dev@zpc.sakura.ne.jp> [wn-ax2033gr]
* ramips: use lzma-loader for Japanese mt7621 devicesINAGAKI Hiroshi2020-04-271-0/+8
| | | | | | | | | In several Japanese routers with MT7621 SoC, the official sysupgrade image cannot be booted properly after switching to kernel 5.4. This commit fixes the issue by using lzma-loader. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: mt7621: use lzma-loader for D-Link DIR-860L B1Szabolcs Hubai2020-04-271-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device has trouble extracting big kernel from flash, and supports LZMA compressed kernels only. Using OpenWrt kernel loader saves us 64 KB compared to the dictionary size limiting workaround. Factory image sizes (commit: 5f126c541a74) with "CONFIG_ALL_KMODS=y": - original ("-d23", default): 4784188 bytes, LZMA ERROR 1 - with "-d19": 4915260, LZMA ERROR 1 - with "-d18": 4915260, diff to original: +128 KB - with "-d17": 4980796, diff to original: +192 KB - with this patch: 4849724, diff to original: +64 KB To save some CPU cycle, use minimal compression ("-a0") for the LZMA compressed uImage. The most robust solution would use a different loader, which reads the compressed kernel directly from the flash. See the thread at [0] for more details! [0] http://lists.infradead.org/pipermail/openwrt-devel/2020-April/022926.html Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com> Tested-by: Stijn Segers <foss@volatilesystems.org> [fixed identation] Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: enable SGMII workaround for affected boardsDavid Bauer2020-04-273-0/+8
| | | | | | | These boards suffer from a sudden inability to establish a link on the SGMII. Enable the workaround to fix the link when it dies. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: ag71xx: unify version dependent codeDavid Bauer2020-04-271-5/+1
| | | | | | | Use IS_ERR_OR_NULL macro to use the same code on kernel 4.19 as well as 5.4. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: ag71xx: remove code for legacy kernelsDavid Bauer2020-04-271-32/+0
| | | | | | | ath79 does not support kernels prior to 4.19 anymore. Remove legacy code for those kernels from the ag71xx driver. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: remove unused TP-Link partition parserDavid Bauer2020-04-274-496/+0
| | | | | | | This parser was added with the target, but no device seems to use it currently, as all partitions are specified in the device-tree. Signed-off-by: David Bauer <mail@david-bauer.net>
* mvebu: tidy up support for GL.iNet GL-MV1000Adrian Schmutzler2020-04-275-22/+15
| | | | | | | | | | | | | | | | | This fixes a bunch of cosmetic issues with GL.iNet GL-MV1000: - apply alphabetic sorting in multiple files - use armada-3720 prefix for DTS like for other devices - fix vendor capitalization for model in DTSes - remove trivial comment in DTS files - use DEVICE_VENDOR/DEVICE_MODEL - remove redundant SUPPORTED_DEVICES - use SOC instead of DEVICE_DTS - remove empty line at EOF Fixes: 050c24f05c85 ("mvebu: add support for GL.iNet GL-MV1000") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm53xx: 5.4: enable NANDDENG Qingfang2020-04-261-1/+4
| | | | | | | NAND driver was dropped in the 5.4 bump, so enable it back Fixes: 50c6938b95a0 ("bcm53xx: add v5.4 support") Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* mvebu: add support for GL.iNet GL-MV1000Li Zhang2020-04-265-1/+344
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds supports for GL-MV1000. Specification: - SOC: Marvell Armada 88F3720 (1GHz) - Flash: 16MB (W25Q128FWSIG) - RAM: 1GB DDR4 - Ethernet: 3x GE (1 WAN + 2 LAN) - EMMC: 8GB EMMC (KLM8G1GETF-B041) - MicroSD: 1x microSD slot - USB: 1x USB 2.0 port(TypeA),1x USB 3.0 port(TypeC) - Button: 1x reset button,1x slide switch - LED: 3x greed LED - UART: 1x UART on PCB (JP1: 3.3V, RX, TX, GND) Update firmware instructions ============================ In the compiled,please gzip -d xxx.img.gz,then update firmware on uboot web. Signed-off-by: Li Zhang <li.zhang@gl-inet.com> [Copied dts file to files-5.4] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/gcc: eliminate uClibc atexit hackRosen Penev2020-04-261-9/+2
| | | | | | | | This seems to be over 10 years old. It doesn't seem to be needed anymore. Tested on malta with uClibc (selected BROKEN). Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: support intel X7xx 10/40GbE adaptersXiaobo Tian2020-04-261-0/+42
| | | | | | Signed-off-by: Xiaobo Tian <peterwillcn@gmail.com> [Add i40evf/i40evf.ko and setect CONFIG_IAVF] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: backport fix for non-regular inodes on f2fsMatt Merhar2020-04-261-0/+69
| | | | | | | | | | | | | | | Upstream commit dda9f4b9ca ("f2fs: fix to skip verifying block address for non-regular inode"). On 4.14, attempting to perform operations on a non-regular inode residing on an f2fs filesystem, such rm-ing a device node, would fail and lead to a warning / call trace in dmesg. This fix was already applied to other kernels upstream - including 4.19, from which the patch was taken. More info at https://bugzilla.kernel.org/show_bug.cgi?id=202495. Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
* uboot-envtools: fix domywifi_dw33d Bad CRC errorweidong jia2020-04-261-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | The current dw33d partition index has changed, this patch solves this problem. old partition layout dev: size erasesize name mtd0: 00040000 00010000 "u-boot" mtd1: 00010000 00010000 "u-boot-env" mtd2: 00fa0000 00010000 "oem-firmware" mtd3: 00010000 00010000 "art" mtd4: 00500000 00020000 "kernel" mtd5: 05b00000 00020000 "ubi" mtd6: 02000000 00020000 "oem-backup" new partition layout dev: size erasesize name mtd0: 00500000 00020000 "kernel" mtd1: 05b00000 00020000 "ubi" mtd2: 02000000 00020000 "oem-backup" mtd3: 00040000 00010000 "u-boot" mtd4: 00010000 00010000 "u-boot-env" mtd5: 00fa0000 00010000 "oem-firmware" mtd6: 00010000 00010000 "art" Signed-off-by: weidong jia <jwdsccd@gmail.com>
* uboot-envtools: update to 2020.04Lucian Cristian2020-04-261-7/+8
| | | | | | also revert to directly download the archive from https Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* u-boot.mk: switch download to httpsLucian Cristian2020-04-261-1/+2
| | | | | | | ftp can cause problems on some networks switch primary download location to https and add another mirror Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* tools/mkimage: update to 2020.04Lucian Cristian2020-04-267-241/+113
| | | | | | | | | also change the download source to https and add a mirror drop merged patches Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com> [Add extra changes to compile on FreeBSD, merge two patches] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: ath10k: increase rx buffer size to 2048Linus Lüssing2020-04-262-1/+38
| | | | | | | | | | | | | | | | | | | | | | | Before, only frames with a maximum size of 1528 bytes could be transmitted between two 802.11s nodes. For batman-adv for instance, which adds its own header to each frame, we typically need an MTU of at least 1532 bytes to be able to transmit without fragmentation. This patch now increases the maxmimum frame size from 1528 to 1656 bytes. Tested with two ath10k devices in 802.11s mode, as well as with batman-adv on top of 802.11s with forwarding disabled. Fix originally found and developed by Ben Greear. Link: https://github.com/greearb/ath10k-ct/issues/89 Link: https://github.com/greearb/ath10k-ct/commit/9e5ab25027e0971fa24ccf93373324c08c4e992d Cc: Ben Greear <greearb@candelatech.com> Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
* perf: build with NO_LIBCAP=1Yangbo Lu2020-04-261-0/+1
| | | | | | | | | Build with NO_LIBCAP=1. This is to resolve build issue. Package perf is missing dependencies for the following libraries: libcap.so.2 Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* gdb: disable gdbserver for arcLuiz Angelo Daros de Luca2020-04-261-0/+1
| | | | | | | | | | Although gdb is supported, gdbserver is still not. checking whether gdbserver is supported on this host... no Build breaks as gdbserver executable is not found during packaging. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* ramips: remove unnecessary DEVICE_PACKAGES for Belkin F7C027Sungbo Eo2020-04-261-1/+0
| | | | | | | kmod-usb-dwc2 and kmod-usb-ledtrig-usbport are not target default packages, and Belkin F7C027 does not have a USB port anyway. Just drop it. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: fix SUPPORTED_DEVICES for Mercury MAC1200R v2Sungbo Eo2020-04-261-1/+0
| | | | | | | | Currently SUPPORTED_DEVICES only contains the old device string. Fix it by removing the first assignment. Fixes: c2334ad60dc8 ("ramips/mt76x8: Synchronize Makefiles with DTS compatible") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* oxnas: move service file to correct placeSungbo Eo2020-04-261-0/+0
| | | | | | | This service file has been misplaced from the very beginning. Fixes: dcc34574efba ("oxnas: bring in new oxnas target") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: netdev: fix kmod-sfp symbolsDavid Bauer2020-04-261-2/+2
| | | | | | Fixes: ec2f7a47d379 ("kernel: add module to support SFP cages") Signed-off-by: David Bauer <mail@david-bauer.net>
* relayd: bump to version 2020-04-25Kevin Darbyshire-Bryant2020-04-261-3/+3
| | | | | | | | f4d759b dhcp.c: further improve validation Further improve input validation for CVE-2020-11752 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* umdns: update to version 2020-04-25Kevin Darbyshire-Bryant2020-04-261-3/+3
| | | | | | | | | | | cdac046 dns.c: fix input validation fix Due to a slight foobar typo, failing to de-reference a pointer, previous fix not quite as complete as it should have been. Improve CVE-2020-11750 fix Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* x86: fix unusable squashfs images by adding missing paddingPetr Štetiar2020-04-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was reported, that after image generation rework x86-64-generic-squashfs-rootfs.img image won't boot on XenServer x86_64 anymore: F2FS-fs (xvda): Magic Mismatch, valid(0xf2f52010) - read(0x84289960) F2FS-fs (xvda): Can't find valid F2FS filesystem in 1th superblock F2FS-fs (xvda): Magic Mismatch, valid(0xf2f52010) - read(0x4e8ee223) F2FS-fs (xvda): Can't find valid F2FS filesystem in 2th superblock List of all partitions: ca00 4207 xvda driver: vbd No filesystem could mount root, tried: ext3 ext2 ext4 squashfs iso9660 f2fs Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(202,0) So lets fix this by adding back padding which was introduced in commit a17d9482f5e2 ("x86: image: fix small disk space in squashfs overlay"). Ref: FS#3036 Fixes: 258f070d1a4f ("x86: fix missing squashfs and ext4 rootfs images") Fixes: cb007a7bf619 ("x86: switch image generation to new code") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: netdev: fix kmod-sfp description capitalizationDavid Bauer2020-04-261-1/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: netdev: add phylink dependency for sfpDavid Bauer2020-04-261-1/+1
| | | | | | Fixes: ec2f7a47d379 ("kernel: add module to support SFP cages") Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: netdev: add kmod-phylinkDavid Bauer2020-04-261-0/+16
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 18:55:22 +0000