aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.124John Audia2022-06-2728-93/+93
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 9e5d743422edc4036cda7d96b96ba62705f382de)
* kernel: bump 5.10 to 5.10.123John Audia2022-06-271-2/+2
| | | | | | | | | | No patches required a rebase, just updated checksum. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 5202a511cc4557303d4b77bf77ebb66e524dcddf)
* kernel: bump 5.10 to 5.10.122John Audia2022-06-2722-58/+58
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 9edc514e3dafcc36db69046a37daab818cfc1a07)
* kernel: bump 5.10 to 5.10.121John Audia2022-06-2735-64/+64
| | | | | | | | | | | | | Manually rebased: oxnas/patches-5.10/100-oxnas-clk-plla-pllb.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 706a4ec40cce108f484b40805bfa48619a0a7f09)
* dropbear: cherry-pick upstream commit 544f28a0Konstantin Demin2022-06-271-0/+134
| | | | | | | | Resolves #10081 Reported-By: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Konstantin Demin <rockdrilla@gmail.com> (cherry picked from commit f98bb1ffe5327d7309f11a3647efd8116d637b33)
* wolfssl: disable AES-NI by default for x86_64Eneas U de Queiroz2022-06-271-1/+6
| | | | | | | | | | | | | WolfSSL is crashing with an illegal opcode in some x86_64 CPUs that have AES instructions but lack other extensions that are used by WolfSSL when AES-NI is enabled. Disable the option by default for now until the issue is properly fixed. People can enable them in a custom build if they are sure it will work for them. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 0bd536723303ccd178e289690d073740c928bb34)
* x86: fix damaged config 5.10 refreshChristian Lamparter2022-06-272-3/+3
| | | | | | | | | | | | | Restore CONFIG_I8K + CONFIG_INTEL_INT0002_VGPIO that got removed when I refreshed the config. Each x86 target gets its own CONFIG_CRYPTO_BLAKE2S + LIB settings as only the x86_64 can use the accelerated x86 version. Also remove two extra spaces that sneaked into geode's config. Fixes: 539e60539a2f ("generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 9fc2d58bf8b37f80e8027dc55b6007e0bfa66ebe)
* generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]Tomasz Maciej Nowak2022-06-2755-2/+107
| | | | | | | | | | | | | This is now built-in, enable so it won't propagate on target configs. Link: https://lkml.org/lkml/2022/1/3/168 Fixes: 79e7a2552e89 ("kernel: bump 5.15 to 5.15.44") Fixes: 0ca93670693b ("kernel: bump 5.10 to 5.10.119") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (Link to Kernel's commit taht made it built-in, CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 539e60539a2fde6531bd179c94bb9c7f8f490f2b)
* include/prereq-build.mk: macOS cross build improvementsMark Mentovai2022-06-271-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | This updates prereq-build.mk to find a suitable realpath utility, and adds another place to look for a suitable getopt utility. realpath has been used most notably by scripts/ipkg-build since commit bb95be9265a9 ("scripts,ipkg-build: use realpath for pkg_dir") and there are assorted other uses of it during a build. It is ordinarily provided by GNU coreutils. This adds a SetupHostCommand to locate it either under its own name or under grealpath, the name that it will be available as under MacPorts or Homebrew, which use --program-prefix=g. Similarly, update the SetupHostCommand for getopt to be able to locate a util-linux getopt at the default path used by MacPorts, in the same fashion that commit cc16f5d73e77 ("build: try to find getopt in macOS homebrew's standard location")' did for Homebrew. As there is no standard alternative --program-prefix for util-linux utilities in the way that GNU packages often use a "g" prefix, this path-based approach is required in case a non-util-linux getopt (such as one provided by an OS) shadows the util-linux getopt in the PATH. Signed-off-by: Mark Mentovai <mark@moxienet.com> (cherry picked from commit f614332197b7b09d21007af59a31920198cd4885)
* broadcom-wl: Fix compilation with kernel 5.10Florian Fainelli2022-06-274-8/+50
| | | | | | | | | | | | | | This adds a few fixes for compiling against Linux 5.10: 1. segment_eq() has been removed with upstream commit 428e2976a5bf7e7f5554286d7a5a33b8147b106a ("uaccess: remove segment_eq") and can use uaccess_kernel() instead 2. ioremap_nocache() is removed and is now an alias for ioremap() with upstream commit 4bdc0d676a643140bdf17dbf7eafedee3d496a3c ("remove ioremap_nocache and devm_ioremap_nocache") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> (cherry picked from commit cd3de51bb4a18f922a961fdeb42c1c8f1f80b425)
* 464xlat: delete SNATed conntracks on interface teardownAlin Nastac2022-06-272-1/+4
| | | | | | | | | | Existing conntracks will continue to be SNATed to 192.0.0.1 even after 464xlat interface gets teared down. To prevent this, matching conntracks must be killed. Signed-off-by: Alin Nastac <alin.nastac@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase] (cherry picked from commit 289c46869b969864676cf9abde4e1e0df33bcf37)
* mediatek: UniFi 6 LR: disable RTCDaniel Golle2022-06-271-0/+6
| | | | | | | | | There is not RTC battery connected to the SoC of the UniFi 6 LR board. Disable the RTC to prevent the system coming up with time set to 2000-01-01 00:00:00 after each reboot. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 692d87a27b44ac73c10cd511c00ee0bec1316d9f)
* ramips: decrease SPI frequency for Phicomm K2PAviana Cruz2022-06-271-2/+1
| | | | | | | | | | | Some K2P comes with the worse boards with GD25Q128 (may be A2), which only works with 50MHz frequency and less. Reduce spi frequency so that these routers can boot. remove m25p,fast-read because it isn't needed for 50MHz SPI. Signed-off-by: Aviana Cruz <gwencroft@proton.me> Signed-off-by: Chuanhong Guo <gch981213@gmail.com> (cherry picked from commit 857ea3f690aba8513b356926d9c430adafc7c50b)
* wireless-regdb: bump to 2022.06.06Stijn Tintel2022-06-272-3/+3
| | | | | | | | | | | | | | | | | | 902b321 wireless-regdb: Update regulatory rules for Israel (IL) 20f6f34 wireless-regdb: add missing spaces for US S1G rules 25652b6 wireless-regdb: Update regulatory rules for Australia (AU) 081873f wireless-regdb: update regulatory database based on preceding changes 166fbdd wireless-regdb: add db files missing from previous commit e3f03f9 Regulatory update for 6 GHz operation in Canada (CA) 888da5f Regulatory update for 6 GHz operation in United States (US) 647bcaa Regulatory update for 6 GHz operation in FI c6b079d wireless-regdb: update regulatory rules for Bulgaria (BG) on 6GHz 2ed39be wireless-regdb: Remove AUTO-BW from 6 GHz rules 7a6ad1a wireless-regdb: Unify 6 GHz rules for EU contries 68a8f2f wireless-regdb: update regulatory database based on preceding changes Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit e3e9eb31a281643737142e8e80c6f49204b5ba18)
* prereq-build: add additional git detectionChristian 'Ansuel' Marangi2022-06-271-1/+2
| | | | | | | | | | | | | | | With some OS (Guix) the git submodule command is wrapped in a script. Current logic parse the git submodule script directly. If it's wrapped the prereq check wrongly fails while 'git submodule --recursive' is actually available. Add an additional check that try to directly use the 'git submodule' command to check if the prereq is satisfied. Fixes: #9986 Reported-by: Attila Lendvai <attila@lendvai.name> Suggested-by: Attila Lendvai <attila@lendvai.name> Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> (cherry picked from commit ab1f3a87063b94f485bd582f32a066b80007bac9)
* mac80211: increase airtime scheduler quantumFelix Fietkau2022-06-271-0/+53
| | | | | | | improves performance by requiring fewer iterations over tx queues Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 7bf5233a2a2b1c81fae2f3a85bb971ef2a7f9b27)
* mac80211: add airtime fairness improvementsFelix Fietkau2022-06-278-3/+1695
| | | | | | | | | This reverts the airtime scheduler back from the virtual-time based scheduler to the deficit round robin scheduler implementation. This reduces burstiness and improves fairness by improving interaction with AQL. Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 6d49a25804d78d639e08a67c86b26991ce6485d8)
* apm821xx: WNDAP660: fix ethernet port orderingChristian Lamparter2022-06-254-13/+13
| | | | | | | | | | | | | | | | | | | Tim Small reported: | Viewing the 'Network' -> 'Switch' config page in LuCI: | | The LuCI LAN 1 port corresponds to the port physically | labelled 2 at the rear of the device. | [...] | | When a patch cord is attached to the port labelled 1 [...], | the LED labelled °2 illuminates. => essentially, the Ports and LEDs are reversed. Reported-by: Tim Small Fixes: #10111 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 36483600d337ab3ec8a6dabeaa160614d07f5588)
* ramips: mt7621-dts: fix claiming rgmii2 pin group for EdgeRouter X SFPArınç ÜNAL2022-06-252-5/+7
| | | | | | | | | | | | | | | | | | | | For a TX->TX connected external phy to transmit/receive data, the rgmii2 pin group needs to be claimed with gpio function, at least for EdgeRouter X SFP. We already claim the pin group under the pinctrl node with gpio function on the gpio node on mt7621_ubnt_edgerouter-x.dtsi. However, we should claim a pin group under its consumer node. It's the ethernet node in this case, which we already claim the rgmii2 pin group under it on mt7621.dtsi. Therefore, set the function as gpio on the rgmii2 node for EdgeRouter X SFP and get rid of claiming the rgmii2 pin group under the pinctrl node. With this change, we also get to remove a definition from mt7621_ubnt_edgerouter-x.dtsi which is specific to EdgeRouter X SFP. This change is tested on an EdgeRouter X SFP. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> (cherry picked from commit a1ad8377355c41a7cc3012b707fcecab923cbc90)
* ramips: force ZyXEL NR7101 to boot from "Kernel" partitionBjørn Mork2022-06-251-0/+1
| | | | | | | | | | | | | | | | | | | | Make sure BootingFlag points to the system partition we install to. The BootingFlag variable selects which system partition the system boots from (0 => "Kernel", 1 => "Kernel2"). OpenWrt does not yet have device specific support for this dual image scheme, and can therefore only boot from "Kernel". This has not been an issue until now, since all known OEM firmware versions have ignored "Kernel2" - leaving the BootingFlag fixed at 0. But the newest OEM firmware has a new upgrade procedure, installing to the "inactive" system partition and setting BootingFlag accordingly. This workaround is needed until the dual image scheme is fully supported. Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit 79112e7d4758cc79dea506ffebdf40e00d94fa06)
* ath79: fix rootfs padding for D-Link DAP-2xxxSebastian Schaper2022-06-251-1/+2
| | | | | | | | | | | | It was observed that `rootfs_data` was sometimes not correctly erased after performing sysupgrade, resulting in previous settings to prevail. Add call to `wrgg-pad-rootfs` in sysupgrade image recipe to ensure any previous jffs2 will be wiped, consistent with DAP-2610 from the ipq40xx target, which introduced the double-flashing procedure for these devices. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net> (cherry picked from commit f770c33d7bb94b610d3a1c1fa84bc917678b65bc)
* mpc85xx: p2020: add RTC ds1307 to kernelJosef Schlehofer2022-06-251-0/+1
| | | | | | | | | | | | | | | If the RTC module is compiled as a module, the hctosys fails to initialize because ds1307 is loaded later. Fixes: [ 2.004145] hctosys: unable to open rtc device (rtc0) [ 11.957997] rtc-ds1307 0-006f: registered as rtc0 This is similar to commit 5481ce9a1157a43d8b2c963e03fb243e70974361, which was done for imx6 target. Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit dc7f78da97c62cd6c17a75f754da5bf6b957837d)
* bcm53xx: remove 07_set_preinit_iface_bcm53xxChristian Lamparter2022-06-251-14/+0
| | | | | | | | | with the switch to DSA setup, the switch gets correctly programmed via the device-tree now. This hack is no longer necessary. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 554ca44730731da6fddc51e1d3027c5e666a7d0d)
* tools/libressl: update to version 3.4.3Josef Schlehofer2022-06-251-2/+2
| | | | | | | | | | | | | | | Release notes: https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.4.3-relnotes.txt ``` It includes the following security fix: * A malicious certificate can cause an infinite loop. Reported by and fix from Tavis Ormandy and David Benjamin, Google. ``` Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit 25534d5cc20a807ff776fdb18847344167ce081d)
* netfilter: kmod-nft-xfrmFlorian Eckert2022-06-252-0/+13
| | | | | | | Add kmod-nft-xfrm package. Signed-off-by: Florian Eckert <fe@dev.tdt.de> (cherry picked from commit 9379bc2fcf905568ef329a121c8c8a11fc98b02c)
* libusb: fix missing linkLeo Soares2022-06-251-1/+1
| | | | | | | | | | adds `libusb-1.0.so` link on the target root again. Fixes: 43539a6aabbe ("libusb: make InstallDev explicit") Signed-off-by: Leo Soares <leo@hyper.ag> (added fixed tag, reworded commit) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit dc59a22f1d0f3a98eee9fa2043f03a764fbefe10)
* mt76: update to the latest versionFelix Fietkau2022-06-241-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 65042bfd759c mt76: mt7915: introduce 802.11ax multi-bss support e756ea3bd069 mt76: fix wrong HE data rate in sniffer tool 47b64131e820 mt76: mt7921: don't enable beacon filter when IEEE80211_CONF_CHANGE_MONITOR is set 7a05f4628e76 mt76: fix monitor rx FCS error in DFS channel 104dd5cb0a40 mt76: mt7915: fix DBDC default band selection on MT7915D a7805e4e1d58 mt76: reduce tx queue lock hold time 0b1deb9292cd mt76: dma: use kzalloc instead of devm_kzalloc for txwi 2e51013b38c9 mt76: dma: reduce lock contention in mt76_dma_tx_cleanup c96fbb86f7e5 mt76: mt7915: rework hardware/phy initialization c2bb44cab51e mt76: mt7915: accept rx frames with non-standard VHT MCS10-11 36c23a4a8422 mt76: mt7921: accept rx frames with non-standard VHT MCS10-11 5b7dd093c8f0 mt76: fix use-after-free by removing a non-RCU wcid pointer c692aacb9bde mt76: fix MBSS index condition in DBDC mode fd6541905aa4 mt76: mt7921u: add suspend/resume support 201b33cf42c2 mt76: mt7921: rely on mt76_dev rxfilter in mt7921_configure_filter 9666c08228e7 mt76: mt7921: honor pm user configuration in mt7921_sniffer_interface_iter 1442710d7936 mt76: mt7915: always call mt7915_wfsys_reset() during init ec4d9b9e8b70 mt76: mt7915: fix unbounded shift in mt7915_mcu_beacon_mbss 6b1efcd72946 mt76: mt7915: fix wfsys reset regression 376ea8152b2b mt76: mt7915: add missing chunk from wfsys reset fix eed44048ca57 Revert "mt76: dma: reduce lock contention in mt76_dma_tx_cleanup" 5beb87716e70 mt76: dma: add wrapper macro for accessing queue registers e0bc736d5617 mt76: add support for overriding the device used for DMA mapping b8c842daa081 mt76: make number of tokens configurable dynamically 87a962e0608f mt76: mt7915: add Wireless Ethernet Dispatch support 2accb74e6be3 mt76: mt7915: fix using null pointer when wfsys on e5227f2f3120 mt76: mt7921: Fix the error handling path of mt7921_pci_probe() ec0e9f4da32f mt76: mt7915: fix possible uninitialized pointer dereference in mt7986_wmac_gpio_setup 5a87be892ba7 mt76: mt7915: fix possible NULL pointer dereference in mt7915_mac_fill_rx_vector fe441e5d3dcf mt76: mt7915: do not pass data pointer to mt7915_mcu_muru_debug_set f3ddfe886283 mt76: mt7915: report rx mode value in mt7915_mac_fill_rx_rate 2a0d370cb5fe mt76: mt7915: use 0xff to initialize bitrate_mask in mt7915_init_bitrate_mask 506bb0605e3e mt76: mt7921: Add AP mode support d4937118ec4f mt76: fix rx reordering with non explicit / psmp ack policy f50672518bcc mt76: do not attempt to reorder received 802.3 packets without agg session 75e046e3c9ae mt76: fix antenna config missing in 6G cap 64ede85f14b5 mt76: mt7915: remove SCS feature db0a67582028 mt76: mt7915: make read-only array ppet16_ppet8_ru3_ru0 static const 68a2f68d5c01 mt76: mt7921: make read-only array ppet16_ppet8_ru3_ru0 static const 1e7b77294e97 mt76: mt7921: fix kernel crash at mt7921_pci_remove 795830a99a6c mt76: mt7915: add debugfs knob for RF registers read/write 60a8ec12a8eb mt76: mt7603: move spin_lock_bh() to spin_lock() 5ec7a2eac867 mt76: mt7915: disable RX_HDR_TRANS_SHORT eecbb4992073 mt76: fix encap offload ethernet type check a666d5637bc3 mt76: fix tx status related use-after-free race on station removal 6da21a0b7280 linux-firmware: update firmware for MT7921 WiFi device 4876688c41dc linux-firmware: update firmware for MT7915 79b1b86040de linux-firmware: add firmware for MT7986 784c27b159b9 linux-firmware: add firmware for MT7922 079e41dc71a1 mt76: mt7915: configure soc clocks in mt7986_wmac_init 747c70fc6c89 mt76: connac: use skb_put_data instead of open coding e98f58815018 mt76: mt7915: update mt7986 patch in mt7986_wmac_adie_patch_7976() b7104b4b2f2d mt76: mt7915: fix twt table_mask to u16 in mt7915_dev d39368f336ee mt76: mt7915: reject duplicated twt flows 4718ed04a655 mt76: mt7915: limit minimum twt duration 84319691b742 mt76: mt7915: reowrk SER debugfs knob bac5f22365a2 mt76: mt7915: introduce mt7915_mac_severe_check() 81524067686c mt76: mt7915: move MT_INT_MASK_CSR to init.c 2b7f5e85290e mt76: mt7915: add support for 6G in-band discovery 31273183ea0a mt76: mt7615/mt7915: do reset_work with mt76's work queue bb54f5e1c115 mt76: mt7915: improve error handling for fw_debug knobs 838529da6470 mt76: mt7915: add more statistics from fw_util debugfs knobs 3a65deb93737 mt76: add gfp to mt76_mcu_msg_alloc signature 8e87669eefcf mt76: mt7921: add ipv6 NS offload support e1b2c18eee29 mt76: mt7915: fix endianness in mt7915_rf_regval_get 0742eaeafee2 mt76: mt76x02u: fix possible memory leak in __mt76x02u_mcu_send_msg d299ad96d867 mt76: mt7915: fix endian bug in mt7915_rf_regval_set() 380eac6f31ec mt76: add 6 GHz band support in mt76_sar_freq_ranges 268ce38e9e36 mt76: mt7921: introduce ACPI SAR support 8c27300b4271 mt76: mt7921: introduce ACPI SAR config in tx power 54b6504a3ef8 mt76: mt7915: add more ethtool stats cdd66d642977 mt76: add DBDC rxq handlings into mac_reset_work b284684f5cba mt76: mt7921: add PATCH_FINISH_REQ cmd response handling f8b9be4287cc mt76: mt7921s: fix firmware download random fail 28b19d2cc53f mt76: mt7915: add missing bh-disable around tx napi enable/schedule 1d8af168e86f mt76: mt7615: add missing bh-disable around rx napi enable/schedule 4554ee652caf mt76: mt7921: fix warning Using plain integer as NULL pointer a3f1d6ccf3ca mt76: mt7921: add missing bh-disable around rx napi schedule 9aeca2a5ce47 mt76: mt7921: get rid of mt7921_mcu_exit fee8a5911c76 mt76: connac: move shared fw structures in connac module db4d784ae7ba mt76: mt7921: move fw toggle in mt7921_load_firmware 16ab6bf49556 mt76: connac: move mt76_connac2_load_ram in connac module 29fd748801c6 mt76: connac: move mt76_connac2_load_patch in connac module 051c68d18214 mt76: mt7663: rely on mt76_connac2_fw_trailer d6ae3505ac6c mt76: enable the VHT extended NSS BW feature 488a5ccc9762 mt76: mt7921: rely on mt76_dev in mt7921_mac_write_txwi signature 934029bb93e2 mt76: mt7915: rely on mt76_dev in mt7915_mac_write_txwi signature ecefae4c7d72 mt76: connac: move mac connac2 defs in mt76_connac2_mac.h b5eecc841df8 mt76: connac: move connac2_mac_write_txwi in mt76_connac module 012e619a07b9 mt76: connac: move mt76_connac2_mac_add_txs_skb in connac module 1b492be795ea mt76: mt7921: not support beacon offload disable command f1f46d3b4b19 mt76: mt7921: fix command timeout in AP stop period cae61112ef1d mt76: connac: move HE radiotap parsing in connac module 487674062643 mt76: connac: move mt76_connac2_reverse_frag0_hdr_trans in mt76-connac module 649bdc4983c4 mt76: connac: move mt76_connac2_mac_fill_rx_rate in connac module cb75aaa39252 mt76: mt7921s: remove unnecessary goto in mt7921s_mcu_drv_pmctrl e0eaf66eaebb mt76: mt7615: do not update pm stats in case of error f8d125b4ea30 mt76: mt7921: do not update pm states in case of error 6329a834907e mt76: mt7921s: fix possible sdio deadlock in command fail 8a04f1b04662 mt76: mt7921: fix aggregation subframes setting to HE max e52283439094 mt76: mt7915: disable UL MU-MIMO for mt7915 fd3958970e3d mt76: mt7921: enlarge maximum VHT MPDU length to 11454 18df38fe77f7 mt76: mt7915: get rid of unnecessary new line in mt7915_mac_write_txwi 149e95f5d7a6 mt76: connac: move mt76_connac_fw_txp in common module 899d192e8a79 mt76: move mt7615_txp_ptr in mt76_connac module 7184f0a6f6a5 mt76: connac: move mt76_connac_tx_free in shared code c42d45278fa5 mt76: connac: move mt76_connac_tx_complete_skb in shared code 0993f4ef96f8 mt76: connac: move mt76_connac_write_hw_txp in shared code 467960fab791 mt76: connac: move mt7615_txp_skb_unmap in common code 2e758064b085 mt76: mt7915: rely on mt76_connac_tx_free 2065a7901671 mt76: move mcu_txd/mcu_rxd structures in shared code 576c1b7c472b mt76: move mt76_connac2_mcu_fill_message in mt76_connac module 7275f7758090 mt76: mt7915: fix incorrect testmode ipg on band 1 caused by wmm_idx 1696f9eb8b40 mt76: mt7915: do not copy ieee80211_ops pointer in mt7915_mmio_probe a4db5869d660 mt76: mt7915: update mpdu density in 6g capability 500c18014d95 mt76: mt7915: add sta_rec with EXTRA_INFO_NEW for the first time only 3ef66fc7c714 mt76: do not check the ccmp pn for ONLY_MONITOR frame dd682eead016 mt76: mt7915: update the maximum size of beacon offload 4fb991f2c997 mt76: mt7615: add sta_rec with EXTRA_INFO_NEW for the first time only ba39ed3b44f1 mt76: mt76x02: improve reliability of the beacon hang check fd8211cf7c59 mt76: mt7921: sync with updated patch f2edd340ddb4 mt76: allow receiving frames with invalid CCMP PN via monitor interfaces b6e865e2cc70 mt76: mt7615: fix throughput regression on DFS channels Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 29ed58c8bee1de5b1779494e88620862edc44700)
* realtek: make "u-boot-env" partition writable for Netgear 3xx seriesAndreas Böhler2022-06-241-1/+0
| | | | | | | | | | The Netgear GS3xx devices do not properly initialise the port LEDs during startup unless the boot command in U-Boot is changed. Making the U-Boot env partition writable allows this modification to be done from within OpenWrt by calling "fw_setenv bootcmd rtk network on\; boota". Signed-off-by: Andreas Böhler <dev@aboehler.at> (cherry picked from commit d9e12c21fa98c90d0cc355e344d90469c5fd42c1)
* realtek: make Netgear GS1xx u-boot env partition writableStijn Segers2022-06-241-1/+0
| | | | | | | | | | | | Make the u-boot environment partition for the NETGEAR GS108T v3 and GS110TPP writable (they share a DTS), so the values can be manipulated from userspace. See https://forum.openwrt.org/t/57875/1567 for a real world example. Signed-off-by: Stijn Segers <foss@volatilesystems.org> (cherry picked from commit 9c381d3386ab375a4c79812641192faef368d191)
* base-files: allow ignoring minor compat-version checkDavid Bauer2022-06-232-0/+5
| | | | | | | | | | | | | Downstream projects might re-generate device-specific configuration based on OpenWrt's defaults on each upgrade, thus being unaffected by forward- as well as backwards-breaking configuration. Add a new sysupgrade parameter, which allows sysupgrades between minor compat-versions. Upgrades will still fail upon mismatching major compat versions. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 34437af88867c4435add8a144417290b7fd4362a)
* ramips: fix booting on ZyXEL NBG-419N v2Piotr Dymacz2022-06-201-0/+1
| | | | | | | | | | | | | | This fixes a well known "LZMA ERROR 1" error, reported previously on numerous of other devices from 'ramips' target. Fixes: #9842 Fixes: #8964 Reported-by: Juergen Hench <jurgen.hench@gmail.com> Tested-by: Juergen Hench <jurgen.hench@gmail.com> Signed-off-by: Demetris Ierokipides <ierokipides.dem@gmail.com> Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (cherry picked from commit fd72e595c2b2a46bab8cbc7e9415fbfeae7b5b0d)
* realtek: add support for power LED on Netgear GS108Tv3Pascal Ernster2022-06-191-0/+27
| | | | | | | | | | | | | | | | | | | | | | The Netgear GS108Tv3 is already supported by OpenWrt, but is missing LED support. After OpenWrt installation, all LEDs are off which makes the installation quite confusing. This enables support for the green/amber power LED to give feedback about the current status. This is basically just a verbatim copy of commit c4927747d25a ("realtek: add support for power LED on Netgear GS308Tv1"). Please note that both LEDs are wired up in an anti-parallel fashion, which means that only one of both LEDs/colors can be switched on at the same time. If both LEDs/colors are switched on simultanously, the LED goes dark. Tested-by: Pascal Ernster <git@hardfalcon.net> Signed-off-by: Pascal Ernster <git@hardfalcon.net> [add title to commit reference] Signed-off-by: Sander Vanheule <sander@svanheule.net> (cherry picked from commit adbdfc9366fed2d28dbd36883ddbdb566a313f71)
* realtek: add support for power LED on Netgear GS308Tv1Andreas Böhler2022-06-191-0/+27
| | | | | | | | | | | The Netgear GS308Tv1 is already supported by OpenWrt, but is missing LED support. After OpenWrt installation, all LEDs are off which makes the installation quite confusing. This enables support for the green/amber power LED to give feedback about the current status. Signed-off-by: Andreas Böhler <dev@aboehler.at> (cherry picked from commit c4927747d25af59db8233a66a59fdf9e8c0e395d)
* Revert "mac80211: add a bug fix for a rare crash"David Bauer2022-06-181-38/+0
| | | | | | | | | | This reverts commit 33df033b73365487c5bb5a58b77aed04d4ca6ac1. It was reported this commit breaks 802.11s mesh connections, failing link establishment. Reported-by: Andreas Ziegler <dev@andreas-ziegler.de> Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: fix RT-AC57U button levelDavid Bauer2022-06-181-1/+1
| | | | | | | | Both buttons on the RT-AC57U are active-low. Fix the GPIO flag for the WPS cutton to fix button behavior. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 535b0c70b1c466733b009144f81f5207f1ecd311)
* hostapd: add owe_transition_ifnameDavid Bauer2022-06-161-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the owe_transition_ifname config option to wifi-ifaces. This allows to configure OWE transition VAPs without adding SSID / BSSID to the uci conifg but instead autodiscovering these parameters from other networks on the same PHY. The following configuration creates a OWE transition mode network constellation. config wifi-iface 'open0' option device 'radio0' option ifname 'open0' option network 'lan' option mode 'ap' option ssid 'FreeNet' option encryption 'none' option owe_transition_ifname 'owe0' config wifi-iface 'owe0' option device 'radio0' option ifname 'owe0' option network 'lan' option mode 'ap' option ssid 'owe_tm.FreeNet' option encryption 'owe' option hidden '1' option owe_transition_ifname 'open0' Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 574539ee2cdbb3dd54086423c6dfdd19bb1c06a6)
* mpc85xx: enable error reporting for RAM and PCIeJosef Schlehofer2022-06-141-0/+4
| | | | | | | | | | | | | | | | | | | | | All Freescale processors used in this target are capable to detect error and correction. [1] It can not be used as kernel module. [2] This is helpful to report hardware errors. It enables three kernel options: - EDAC, which is a subsystem - EDAC_LEGACY_SYSFS, it enables sysfq nodes - MP85XX, support for Freescale MPC8349, MPC8560, MPC8540, MPC8548, T4240 EDAC is already enabled for following targets: qoriq, octeon, octeontx and zynq. [1] https://cateee.net/lkddb/web-lkddb/EDAC.html [2] https://patchwork.ozlabs.org/patch/554908/ Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit bfc73f42df3189a2eb34bebc8d9e73b3389a83a2)
* uboot-mvebu: update to version v2022.04Josef Schlehofer2022-06-148-524/+2
| | | | | | | | | | | | | | | Release announcement: https://lore.kernel.org/u-boot/20220404143253.GQ14476@bill-the-cat/ Release notes between tags: https://source.denx.de/u-boot/u-boot/-/compare/v2022.01...v2022.04?from_project_id=531 All patches were removed, since they are included in this release. Run tested: Turris Omnia, mvebu/cortex-a9, OpenWrt daily snapshots Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit 4f51f1fc9b3597d24de442cfff253fddce478d17)
* uboot-mvebu: remove enabled CONFIG_CMD_SETEXPRJosef Schlehofer2022-06-141-7/+0
| | | | | | | | | | | | | | | | | | | | | | | We don't need to make sure that we want to have enabled CONFIG_CMD_SETEXPR by default, since this is already done in U-boot [1]. This was actually needed only for clearfog board [2], which was added in commit: da0005a6d08ae33d958a6d8a6c0c12dc07b5b2b8 ("uboot-mvebu: add patch to enable setexpr for clearfog boards) and send to U-boot to fix it properly. After a while, there was added support for Turris Omnia, which uses setexpr as well [3], but for this board, there are no fixes needed in U-boot and that's why we can remove this option here. It is helpful with shell scripting. If some downstream distributions are using it, they should correct it in defconfig for related boards. [1] https://source.denx.de/u-boot/u-boot/-/blob/e95afa56753cebcd20a5114b6d121f281b789006/cmd/Kconfig#L1504 [2] https://github.com/openwrt/openwrt/blob/852126680e21edc71c0c66561ae5a6d7479dcc67/target/linux/mvebu/image/clearfog.bootscript#L7 [3] https://github.com/openwrt/openwrt/blob/852126680e21edc71c0c66561ae5a6d7479dcc67/target/linux/mvebu/image/turris-omnia.bootscript#L2 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit 69cef74c671cb7fa738a5a4c9a283c29f45326c7)
* uboot-mvebu: add patch to enable setexpr for clearfog boardsJosef Schlehofer2022-06-141-0/+31
| | | | | | | | | | | | | | | Option CMD_SETEXPR is already default in U-boot [1], since this was disabled since initial version for this board, there is send this patch to U-boot mailing list to enable it. It is required to use in OpenWrt bootscript for these boards [2]. [1] https://source.denx.de/u-boot/u-boot/-/blob/e95afa56753cebcd20a5114b6d121f281b789006/cmd/Kconfig#L1504 [2] https://github.com/openwrt/openwrt/blob/852126680e21edc71c0c66561ae5a6d7479dcc67/target/linux/mvebu/image/clearfog.bootscript#L7 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit b3c2072504867b8ca00dde37f531edf0cfbe3359)
* kernel: crypto: add kmod-crypto-chacha20poly1305Xu Wang2022-06-111-0/+12
| | | | | | | | | Needed by strongSwan IPsec VPN for strongswan-mod-chapoly. Not to be confused with kmod-crypto-LIB-chacha20poly1305, which is an 8-byte nonce version used by wireguard. Signed-off-by: Xu Wang <xwang1498@gmx.com> (cherry picked from commit 197b672c40613a53a78a568a1957f2c23c343c1f)
* sunxi/cortexa53: enable armv8-CE crypto algorithmsEneas U de Queiroz2022-06-111-0/+10
| | | | | | | | This enables armv8 crypto extensions version of AES, GHASH, SHA1, and CRC T10 algorithms in the kernel. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 9be35180f43a4916f53430d8c93437d33896e860)
* rockchip/armv8: enable armv8-CE crypto algorithmsEneas U de Queiroz2022-06-111-0/+9
| | | | | | | | This enables armv8 crypto extensions version of AES, GHASH, and CRC T10 algorithms in the kernel. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit b1346d35e470662c98912efc49108733ee7c101c)
* octeontx: add armv8-CE version of CRC T10Eneas U de Queiroz2022-06-111-0/+1
| | | | | | | | Adds the crypto extensions version of the CRC T10 algorithm that is already built into the kernel. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 1b94e4aab8ddbe5719f1e859e064c1c5dfa4587f)
* mvebu/cortexa72: enable armv8-CE crypto algosEneas U de Queiroz2022-06-111-0/+11
| | | | | | | | | | | | This enables armv8 crypto extensions version of AES, GHASH, SHA1, SHA256, and SHA512 algorithms in the kernel. The choice of algorithms match the 32-bit versions that are enabled in the target config-5.10 file, but were only used by the cortexa9 subtarget. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 06bb5ac1f2b62c3e10f24d7096e86f6368aaf41d)
* mvebu/cortexa72: refresh kernel 5.10 configEneas U de Queiroz2022-06-111-1/+4
| | | | | | | This is result of a plain make kernel_oldconfig CONFIG_TARGET=subtarget. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 39b6af114747fbee06cf6fab3a76d7037b53a4cc)
* mvebu/cortexa53: enable armv8-CE crypto algosEneas U de Queiroz2022-06-111-0/+11
| | | | | | | | | | | | This enables armv8 crypto extensions version of AES, GHASH, SHA1, SHA256, and SHA512 algorithms in the kernel. The choice of algorithms match the 32-bit versions that are enabled in the target config-5.10 file, but were only used by the cortexa9 subtarget. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit f5167e11bf7e0a1a3675f0563423254005d0eb2d)
* mvebu/cortexa53: refresh kernel 5.10 configEneas U de Queiroz2022-06-111-1/+7
| | | | | | | This is result of a plain make kernel_oldconfig CONFIG_TARGET=subtarget. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit a4c6384d930a0d0817ad12770da3abbd106e8c4d)
* layerscape/armv8_64b: enable armv8-CE crypto algosEneas U de Queiroz2022-06-111-0/+11
| | | | | | | | This enables armv8 crypto extensions version of AES, GHASH, SHA256 and CRC T10 algorithms in the kernel. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit eb33232420ea2537d8302d5ec121eed03db474d1)
* bcm4908: enable armv8-CE crypto algorithmsEneas U de Queiroz2022-06-111-0/+8
| | | | | | | | This enables armv8 crypto extensions version of AES and GHASH algorithms in the kernel. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit b2cb87bc98e8d7b5f29899b8b966990e200cfe44)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 21:41:23 +0000