openwrt/upstream - upstream openwrt

	Commit message (Expand)	Author	Age	Files	Lines
*	ramips: convert mtd-mac-address to nvmem implementation	Ansuel Smith	2021-07-19	1	-1/+12
*	ramips: remove model name from LED labels	Adrian Schmutzler	2020-10-02	1	-2/+2
*	ramips: move dts-v1 statement to top-level DTSI files	Adrian Schmutzler	2020-09-25	1	-2/+0
*	ramips: dts: use generic node name for flash	Sungbo Eo	2020-05-09	1	-1/+1
*	ramips: use hex notation for *-mtd-eeprom property	Sungbo Eo	2020-05-08	1	-1/+1
*	ramips: replace pinctrl property names	Chuanhong Guo	2020-04-12	1	-2/+2
*	ramips: simplify state_default/pinctrl0 in device DTS files	Adrian Schmutzler	2019-12-23	1	-6/+4
*	ramips/rt305x: Name DTS files based on scheme	Adrian Schmutzler	2019-07-10	1	-0/+113

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca956x.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { compatible = "tplink,archer-c25-v1", "qca,qca9561"; model = "TP-Link Archer C25 v1"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; label-mac-device = &eth0; }; led_spi { compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; led_gpio: led_gpio@0 { compatible = "fairchild,74hc595"; reg = <0>; gpio-controller; #gpio-cells = <2>; registers-number = <1>; spi-max-frequency = <10000000>; }; }; keys { compatible = "gpio-keys"; wifi { label = "WiFi button"; linux,code = <KEY_RFKILL>; gpios = <&gpio 22 GPIO_ACTIVE_LOW>; }; reset { label = "Reset button"; linux,code = <KEY_RESTART>; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; led_power: power { label = "green:power"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; default-state = "on"; }; wps { label = "green:wps"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; }; wlan2g { label = "green:wlan2g"; gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; wlan5g { label = "green:wlan5g"; gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wan_green { label = "green:wan"; gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; }; wan_amber { label = "amber:wan"; gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; }; lan1 { label = "green:lan1"; gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; }; lan2 { label = "green:lan2"; gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; }; lan3 { label = "green:lan3"; gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; }; lan4 { label = "green:lan4"; gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; }; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "factory-boot"; reg = <0x000000 0x020000>; read-only; }; partition@20000 { label = "u-boot"; reg = <0x020000 0x010000>; read-only; }; partition@30000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x030000 0x7a0000>; }; config: partition@7d0000 { label = "config"; reg = <0x7d0000 0x010000>; read-only; }; info: partition@7e0000 { label = "info"; reg = <0x7e0000 0x010000>; read-only; }; art: partition@7f0000 { label = "art"; reg = <0x7f0000 0x010000>; read-only; }; }; }; }; &pcie { status = "okay"; }; &eth0 { status = "okay"; phy-handle = <&swphy4>; nvmem-cells = <&macaddr_info_8>; nvmem-cell-names = "mac-address"; }; &eth1 { status = "okay"; nvmem-cells = <&macaddr_info_8>; nvmem-cell-names = "mac-address"; mac-address-increment = <1>; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; nvmem-cells = <&macaddr_info_8>; nvmem-cell-names = "mac-address"; }; &info { compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; macaddr_info_8: macaddr@8 { reg = <0x8 0x6>; }; };