path: root/package/boot/uboot-lantiq/patches/0016-net-add-driver-for-Lantiq-XWAY-ARX100-switch.patch

From 7288414298b34dcda1216fee1fe38d05ea0027a2 Mon Sep 17 00:00:00 2001
From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Date: Mon, 17 Dec 2012 23:32:39 +0100
Subject: net: add driver for Lantiq XWAY ARX100 switch

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

--- a/arch/mips/include/asm/arch-arx100/config.h
+++ b/arch/mips/include/asm/arch-arx100/config.h
@@ -10,17 +10,21 @@
  * and drivers for this SoC:
  *
  * CONFIG_LTQ_SUPPORT_UART
- * - support the Danube ASC/UART interface and console
+ * - support the ARX100 ASC/UART interface and console
  *
  * CONFIG_LTQ_SUPPORT_NOR_FLASH
  * - support a parallel NOR flash via the CFI interface in flash bank 0
  *
  * CONFIG_LTQ_SUPPORT_ETHERNET
- * - support the Danube ETOP and MAC interface
+ * - support the ARX100 ETOP and MAC interface
  *
  * CONFIG_LTQ_SUPPORT_SPI_FLASH
- * - support the Danube SPI interface and serial flash drivers
+ * - support the ARX100 SPI interface and serial flash drivers
  * - specific SPI flash drivers must be configured separately
+ *
+ * CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH
+ * - build a preloader that runs in the internal SRAM and loads
+ *   the U-Boot from SPI flash into RAM
  */
 
 #ifndef __ARX100_CONFIG_H__
--- /dev/null
+++ b/arch/mips/include/asm/arch-arx100/switch.h
@@ -0,0 +1,86 @@
+/*
+ *   Copyright (C) 2012-2013 Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ *
+ *   SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ARX100_SWITCH_H__
+#define __ARX100_SWITCH_H__
+
+struct ar9_switch_regs {
+	__be32	ps;		/* Port status*/
+	__be32	p0_ctl;		/* Port 0 control */
+	__be32	p1_ctl;		/* Port 1 control */
+	__be32	p2_ctl;		/* Port 2 control */
+	__be32	p0_vlan;	/* Port 0 VLAN control */
+	__be32	p1_vlan;	/* Port 1 VLAN control */
+	__be32	p2_vlan;	/* Port 2 VLAN control */
+	__be32	p0_inctl;	/* Port 0 ingress control */
+	__be32	p1_inctl;	/* Port 1 ingress control */
+	__be32	p2_inctl;	/* Port 2 ingress control */
+	u32	rsvd0[16];
+	__be32	sw_gctl0;	/* Switch global control 0 */
+	__be32	sw_gctl1;	/* Switch global control 1 */
+	__be32	arp;		/* ARP/RARP */
+	__be32	strm_ctl;	/* Storm control */
+	__be32	rgmii_ctl;	/* RGMII/GMII port control */
+	u32	rsvd1[4];
+	__be32	pmac_hd_ctl;	/* PMAC header control */
+	u32	rsvd2[15];
+	__be32	mdio_ctrl;	/* MDIO indirect access control */
+	__be32	mdio_data;	/* MDIO indirect read data */
+};
+
+#define BUILD_CHECK_AR9_REG(name, offset)	\
+	BUILD_BUG_ON(offsetof(struct ar9_switch_regs, name) != (offset))
+
+static inline void build_check_ar9_registers(void)
+{
+	BUILD_CHECK_AR9_REG(sw_gctl0, 0x68);
+	BUILD_CHECK_AR9_REG(rgmii_ctl, 0x78);
+	BUILD_CHECK_AR9_REG(pmac_hd_ctl, 0x8c);
+	BUILD_CHECK_AR9_REG(mdio_ctrl, 0xcc);
+	BUILD_CHECK_AR9_REG(mdio_data, 0xd0);
+}
+
+#define P0_CTL_FLP		(1 << 18)
+#define P0_CTL_FLD		(1 << 17)
+
+#define SW_GCTL0_SE		(1 << 31)
+
+#define RGMII_CTL_P1_SHIFT	10
+#define RGMII_CTL_P1_MASK	(0x3FF << RGMII_CTL_P1_SHIFT)
+#define RGMII_CTL_P0_MASK	0x3FF
+#define RGMII_CTL_P0IS_SHIFT	8
+#define RGMII_CTL_P0IS_RGMII	(0x0 << RGMII_CTL_P0IS_SHIFT)
+#define RGMII_CTL_P0IS_MII	(0x1 << RGMII_CTL_P0IS_SHIFT)
+#define RGMII_CTL_P0IS_REVMII	(0x2 << RGMII_CTL_P0IS_SHIFT)
+#define RGMII_CTL_P0IS_RMII	(0x3 << RGMII_CTL_P0IS_SHIFT)
+#define RGMII_CTL_P0RDLY_SHIFT	6
+#define RGMII_CTL_P0RDLY_0_0	(0x0 << RGMII_CTL_P0RDLY_SHIFT)
+#define RGMII_CTL_P0RDLY_1_5	(0x1 << RGMII_CTL_P0RDLY_SHIFT)
+#define RGMII_CTL_P0RDLY_1_75	(0x2 << RGMII_CTL_P0RDLY_SHIFT)
+#define RGMII_CTL_P0RDLY_2_0	(0x3 << RGMII_CTL_P0RDLY_SHIFT)
+#define RGMII_CTL_P0TDLY_SHIFT	4
+#define RGMII_CTL_P0TDLY_0_0	(0x0 << RGMII_CTL_P0TDLY_SHIFT)
+#define RGMII_CTL_P0TDLY_1_5	(0x1 << RGMII_CTL_P0TDLY_SHIFT)
+#define RGMII_CTL_P0TDLY_1_75	(0x2 << RGMII_CTL_P0TDLY_SHIFT)
+#define RGMII_CTL_P0TDLY_2_0	(0x3 << RGMII_CTL_P0TDLY_SHIFT)
+#define RGMII_CTL_P0SPD_SHIFT	2
+#define RGMII_CTL_P0SPD_10	(0x0 << RGMII_CTL_P0SPD_SHIFT)
+#define RGMII_CTL_P0SPD_100	(0x1 << RGMII_CTL_P0SPD_SHIFT)
+#define RGMII_CTL_P0SPD_1000	(0x2 << RGMII_CTL_P0SPD_SHIFT)
+#define RGMII_CTL_P0DUP_FULL	(1 << 1)
+#define RGMII_CTL_P0FCE_EN	(1 << 0)
+
+#define PMAC_HD_CTL_AC		(1 << 18)
+
+#define MDIO_CTRL_WD_SHIFT	16
+#define MDIO_CTRL_MBUSY		(1 << 15)
+#define MDIO_CTRL_OP_READ	(1 << 11)
+#define MDIO_CTRL_OP_WRITE	(1 << 10)
+#define MDIO_CTRL_PHYAD_SHIFT	5
+#define MDIO_CTRL_PHYAD_MASK	(0x1f << MDIO_CTRL_PHYAD_SHIFT)
+#define MDIO_CTRL_REGAD_MASK	0x1f
+
+#endif /* __ARX100_SWITCH_H__ */
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -38,6 +38,7 @@ COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks86
 COBJS-$(CONFIG_KS8851_MLL) += ks8851_mll.o
 COBJS-$(CONFIG_LAN91C96) += lan91c96.o
 COBJS-$(CONFIG_LANTIQ_DANUBE_ETOP) += lantiq_danube_etop.o
+COBJS-$(CONFIG_LANTIQ_ARX100_SWITCH) += lantiq_arx100_switch.o
 COBJS-$(CONFIG_LANTIQ_VRX200_SWITCH) += lantiq_vrx200_switch.o
 COBJS-$(CONFIG_MACB) += macb.o
 COBJS-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
--- /dev/null
+++ b/drivers/net/lantiq_arx100_switch.c
@@ -0,0 +1,410 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#define DEBUG
+#include <common.h>
+#include <malloc.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <switch.h>
+#include <linux/compiler.h>
+#include <asm/gpio.h>
+#include <asm/processor.h>
+#include <asm/lantiq/io.h>
+#include <asm/lantiq/eth.h>
+#include <asm/lantiq/pm.h>
+#include <asm/lantiq/reset.h>
+#include <asm/lantiq/dma.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/switch.h>
+
+#define LTQ_ETH_RX_BUFFER_CNT		PKTBUFSRX
+#define LTQ_ETH_TX_BUFFER_CNT		8
+#define LTQ_ETH_RX_DATA_SIZE		PKTSIZE_ALIGN
+#define LTQ_ETH_IP_ALIGN		2
+
+#define LTQ_MDIO_DRV_NAME		"ltq-mdio"
+#define LTQ_ETH_DRV_NAME		"ltq-eth"
+
+#define LTQ_ETHSW_MAX_GMAC		2
+#define LTQ_ETHSW_PMAC			2
+
+struct ltq_eth_priv {
+	struct ltq_dma_device dma_dev;
+	struct mii_dev *bus;
+	struct eth_device *dev;
+	struct phy_device *phymap[LTQ_ETHSW_MAX_GMAC];
+	int rx_num;
+	int tx_num;
+};
+
+static struct ar9_switch_regs *switch_regs =
+	(struct ar9_switch_regs *) CKSEG1ADDR(LTQ_SWITCH_BASE);
+
+static int ltq_mdio_is_busy(void)
+{
+	u32 mdio_ctrl = ltq_readl(&switch_regs->mdio_ctrl);
+
+	return mdio_ctrl & MDIO_CTRL_MBUSY;
+}
+
+static void ltq_mdio_poll(void)
+{
+	while (ltq_mdio_is_busy())
+		cpu_relax();
+
+	__udelay(1000);
+}
+
+static int ltq_mdio_read(struct mii_dev *bus, int phyad, int devad,
+					int regad)
+{
+	u32 mdio_ctrl;
+	int retval;
+
+	mdio_ctrl = MDIO_CTRL_MBUSY | MDIO_CTRL_OP_READ |
+		((phyad << MDIO_CTRL_PHYAD_SHIFT) & MDIO_CTRL_PHYAD_MASK) |
+		(regad & MDIO_CTRL_REGAD_MASK);
+
+	ltq_mdio_poll();
+	ltq_writel(&switch_regs->mdio_ctrl, mdio_ctrl);
+	ltq_mdio_poll();
+	retval = ltq_readl(&switch_regs->mdio_data);
+	ltq_writel(&switch_regs->mdio_data, 0xFFFF);
+
+	debug("%s: phyad %02x, regad %02x, val %02x\n", __func__, phyad, regad, retval);
+
+	return retval;
+}
+
+static int ltq_mdio_write(struct mii_dev *bus, int phyad, int devad,
+					int regad, u16 val)
+{
+	u32 mdio_ctrl;
+
+	debug("%s: phyad %02x, regad %02x, val %02x\n", __func__, phyad, regad, val);
+
+	mdio_ctrl = (val << MDIO_CTRL_WD_SHIFT) | MDIO_CTRL_MBUSY |
+		MDIO_CTRL_OP_WRITE |
+		((phyad << MDIO_CTRL_PHYAD_SHIFT) & MDIO_CTRL_PHYAD_MASK) |
+		(regad & MDIO_CTRL_REGAD_MASK);
+
+	ltq_mdio_poll();
+	ltq_writel(&switch_regs->mdio_ctrl, mdio_ctrl);
+
+	return 0;
+}
+
+static void ltq_eth_gmac_update(struct phy_device *phydev, int num)
+{
+}
+
+static inline u8 *ltq_eth_rx_packet_align(int rx_num)
+{
+	u8 *packet = (u8 *) NetRxPackets[rx_num];
+
+	/*
+	 * IP header needs
+	 */
+	return packet + LTQ_ETH_IP_ALIGN;
+}
+
+static int ltq_eth_init(struct eth_device *dev, bd_t *bis)
+{
+	struct ltq_eth_priv *priv = dev->priv;
+	struct ltq_dma_device *dma_dev = &priv->dma_dev;
+	struct phy_device *phydev;
+	int i;
+
+	for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++) {
+		phydev = priv->phymap[i];
+		if (!phydev)
+			continue;
+
+		phy_startup(phydev);
+		ltq_eth_gmac_update(phydev, i);
+	}
+
+	for (i = 0; i < LTQ_ETH_RX_BUFFER_CNT; i++)
+		ltq_dma_rx_map(dma_dev, i, ltq_eth_rx_packet_align(i),
+			LTQ_ETH_RX_DATA_SIZE);
+
+	ltq_dma_enable(dma_dev);
+
+	priv->rx_num = 0;
+	priv->tx_num = 0;
+
+	return 0;
+}
+
+static void ltq_eth_halt(struct eth_device *dev)
+{
+	struct ltq_eth_priv *priv = dev->priv;
+	struct ltq_dma_device *dma_dev = &priv->dma_dev;
+	struct phy_device *phydev;
+	int i;
+
+	ltq_dma_reset(dma_dev);
+
+	for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++) {
+		phydev = priv->phymap[i];
+		if (!phydev)
+			continue;
+
+		phy_shutdown(phydev);
+		phydev->link = 0;
+		ltq_eth_gmac_update(phydev, i);
+	}
+}
+
+static int ltq_eth_send(struct eth_device *dev, void *packet, int length)
+{
+	struct ltq_eth_priv *priv = dev->priv;
+	struct ltq_dma_device *dma_dev = &priv->dma_dev;
+	int err;
+
+	err = ltq_dma_tx_map(dma_dev, priv->tx_num, packet, length, 10);
+	if (err) {
+		puts("NET: timeout on waiting for TX descriptor\n");
+		return -1;
+	}
+
+	priv->tx_num = (priv->tx_num + 1) % LTQ_ETH_TX_BUFFER_CNT;
+
+	return err;
+}
+
+static int ltq_eth_recv(struct eth_device *dev)
+{
+	struct ltq_eth_priv *priv = dev->priv;
+	struct ltq_dma_device *dma_dev = &priv->dma_dev;
+	u8 *packet;
+	int len;
+
+	if (!ltq_dma_rx_poll(dma_dev, priv->rx_num))
+		return 0;
+
+#if 0
+	printf("%s: rx_num %d\n", __func__, priv->rx_num);
+#endif
+
+	len = ltq_dma_rx_length(dma_dev, priv->rx_num);
+	packet = ltq_eth_rx_packet_align(priv->rx_num);
+
+#if 0
+	printf("%s: received: packet %p, len %u, rx_num %d\n",
+		__func__, packet, len, priv->rx_num);
+#endif
+
+	if (len)
+		NetReceive(packet, len);
+
+	ltq_dma_rx_map(dma_dev, priv->rx_num, packet,
+		LTQ_ETH_RX_DATA_SIZE);
+
+	priv->rx_num = (priv->rx_num + 1) % LTQ_ETH_RX_BUFFER_CNT;
+
+	return 0;
+}
+
+static void ltq_eth_pmac_init(void)
+{
+	/* Add CRC to packets from DMA to PMAC */
+	ltq_setbits(&switch_regs->pmac_hd_ctl, PMAC_HD_CTL_AC);
+
+	/* Force link up */
+	ltq_setbits(&switch_regs->p2_ctl, P0_CTL_FLP);
+}
+
+static void ltq_eth_hw_init(const struct ltq_eth_port_config *port)
+{
+	/* Power up ethernet subsystems */
+	ltq_pm_enable(LTQ_PM_ETH);
+
+	/* Enable switch core */
+	ltq_setbits(&switch_regs->sw_gctl0, SW_GCTL0_SE);
+
+	/* MII/MDIO */
+	gpio_set_altfunc(42, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+	/* MII/MDC */
+	gpio_set_altfunc(43, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+
+	ltq_eth_pmac_init();
+}
+
+static void ltq_eth_port_config(struct ltq_eth_priv *priv,
+				const struct ltq_eth_port_config *port)
+{
+	struct phy_device *phydev;
+	struct switch_device *sw;
+	u32 rgmii_ctl;
+	unsigned int port_ctl, port_xmii = 0;
+
+	if (port->num > 1)
+		return;
+
+	rgmii_ctl = ltq_readl(&switch_regs->rgmii_ctl);
+
+	if (port->num == 1)
+		port_ctl = ltq_readl(&switch_regs->p1_ctl);
+	else
+		port_ctl = ltq_readl(&switch_regs->p0_ctl);
+
+	switch (port->phy_if) {
+	case PHY_INTERFACE_MODE_RGMII:
+		port_xmii = RGMII_CTL_P0IS_RGMII;
+
+		switch (port->rgmii_tx_delay) {
+		case 1:
+			port_xmii |= RGMII_CTL_P0TDLY_1_5;
+			break;
+		case 2:
+			port_xmii |= RGMII_CTL_P0TDLY_1_75;
+			break;
+		case 3:
+			port_xmii |= RGMII_CTL_P0TDLY_2_0;
+			break;
+		default:
+			break;
+		}
+
+		switch (port->rgmii_rx_delay) {
+		case 1:
+			port_xmii |= RGMII_CTL_P0RDLY_1_5;
+			break;
+		case 2:
+			port_xmii |= RGMII_CTL_P0RDLY_1_75;
+			break;
+		case 3:
+			port_xmii |= RGMII_CTL_P0RDLY_2_0;
+			break;
+		default:
+			break;
+		}
+
+		if (!(port->flags & LTQ_ETH_PORT_PHY)) {
+			port_xmii |= (RGMII_CTL_P0SPD_1000 |
+					RGMII_CTL_P0DUP_FULL);
+			port_ctl |= P0_CTL_FLP;
+		}
+
+		break;
+	case PHY_INTERFACE_MODE_MII:
+		port_xmii = RGMII_CTL_P0IS_MII;
+
+		if (!(port->flags & LTQ_ETH_PORT_PHY)) {
+			port_xmii |= (RGMII_CTL_P0SPD_100 |
+					RGMII_CTL_P0DUP_FULL);
+			port_ctl |= P0_CTL_FLP;
+		}
+
+		break;
+	default:
+		break;
+	}
+
+	if (port->num == 1) {
+		ltq_writel(&switch_regs->p1_ctl, port_ctl);
+
+		rgmii_ctl &= ~RGMII_CTL_P1_MASK;
+		rgmii_ctl |= (port_xmii << RGMII_CTL_P1_SHIFT);
+	} else {
+		ltq_writel(&switch_regs->p0_ctl, port_ctl);
+
+		rgmii_ctl &= ~RGMII_CTL_P0_MASK;
+		rgmii_ctl |= port_xmii;
+	}
+
+	ltq_writel(&switch_regs->rgmii_ctl, rgmii_ctl);
+
+	/* Connect to external switch */
+	if (port->flags & LTQ_ETH_PORT_SWITCH) {
+		sw = switch_connect(priv->bus);
+		if (sw)
+			switch_setup(sw);
+	}
+
+	/* Connect to internal/external PHYs */
+	if (port->flags & LTQ_ETH_PORT_PHY) {
+		phydev = phy_connect(priv->bus, port->phy_addr, priv->dev,
+					port->phy_if);
+		if (phydev)
+			phy_config(phydev);
+
+		priv->phymap[port->num] = phydev;
+	}
+}
+
+int ltq_eth_initialize(const struct ltq_eth_board_config *board_config)
+{
+	struct eth_device *dev;
+	struct mii_dev *bus;
+	struct ltq_eth_priv *priv;
+	struct ltq_dma_device *dma_dev;
+	const struct ltq_eth_port_config *port = &board_config->ports[0];
+	int i, ret;
+
+	build_check_ar9_registers();
+
+	ltq_dma_init();
+	ltq_eth_hw_init(port);
+
+	dev = calloc(1, sizeof(*dev));
+	if (!dev)
+		return -1;
+
+	priv = calloc(1, sizeof(*priv));
+	if (!priv)
+		return -1;
+
+	bus = mdio_alloc();
+	if (!bus)
+		return -1;
+
+	sprintf(dev->name, LTQ_ETH_DRV_NAME);
+	dev->priv = priv;
+	dev->init = ltq_eth_init;
+	dev->halt = ltq_eth_halt;
+	dev->recv = ltq_eth_recv;
+	dev->send = ltq_eth_send;
+
+	sprintf(bus->name, LTQ_MDIO_DRV_NAME);
+	bus->read = ltq_mdio_read;
+	bus->write = ltq_mdio_write;
+	bus->priv = priv;
+
+	dma_dev = &priv->dma_dev;
+	dma_dev->port = 0;
+	dma_dev->rx_chan.chan_no = 0;
+	dma_dev->rx_chan.class = 0;
+	dma_dev->rx_chan.num_desc = LTQ_ETH_RX_BUFFER_CNT;
+	dma_dev->rx_endian_swap = LTQ_DMA_ENDIANESS_B3_B2_B1_B0;
+	dma_dev->rx_burst_len = LTQ_DMA_BURST_2WORDS;
+	dma_dev->tx_chan.chan_no = 1;
+	dma_dev->tx_chan.class = 0;
+	dma_dev->tx_chan.num_desc = LTQ_ETH_TX_BUFFER_CNT;
+	dma_dev->tx_endian_swap = LTQ_DMA_ENDIANESS_B3_B2_B1_B0;
+	dma_dev->tx_burst_len = LTQ_DMA_BURST_2WORDS;
+
+	priv->bus = bus;
+	priv->dev = dev;
+
+	ret = ltq_dma_register(dma_dev);
+	if (ret)
+		return ret;
+
+	ret = mdio_register(bus);
+	if (ret)
+		return ret;
+
+	ret = eth_register(dev);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < board_config->num_ports; i++)
+		ltq_eth_port_config(priv, &board_config->ports[i]);
+
+	return 0;
+}