1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
|
/*
* jjPlus JWAP230 board support
*
* Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
*
* Based on mach-wpj558.c and mach-tl-wr1043nd-v2.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/pci.h>
#include <linux/phy.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "pci.h"
#define JWAP230_GPIO_LED_LED1 23
#define JWAP230_GPIO_LED_LED2 22
#define JWAP230_GPIO_LED_LED3 21
#define JWAP230_MAC0_OFFSET 0x0
#define JWAP230_MAC1_OFFSET 0x6
#define JWAP230_WMAC_CALDATA_OFFSET 0x1000
static struct gpio_led jwap230_leds_gpio[] __initdata = {
{
.name = "jwap230:green:led1",
.gpio = JWAP230_GPIO_LED_LED1,
.active_low = 1,
},
{
.name = "jwap230:green:led2",
.gpio = JWAP230_GPIO_LED_LED2,
.active_low = 1,
},
{
.name = "jwap230:green:led3",
.gpio = JWAP230_GPIO_LED_LED3,
.active_low = 1,
}
};
static const struct ar8327_led_info jwap230_leds_qca8337[] = {
AR8327_LED_INFO(PHY0_0, HW, "jwap230:green:lan"),
AR8327_LED_INFO(PHY4_0, HW, "jwap230:green:wan"),
};
/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */
static struct ar8327_led_cfg jwap230_qca8337_led_cfg = {
.led_ctrl0 = 0xcf37cf37,
.led_ctrl1 = 0xcf37cf37,
.led_ctrl2 = 0xcf37cf37,
.led_ctrl3 = 0x0,
.open_drain = true,
};
/* QCA8337 GMAC0 is connected with QCA9558 over RGMII */
static struct ar8327_pad_cfg jwap230_qca8337_pad0_cfg = {
.mode = AR8327_PAD_MAC_RGMII,
.txclk_delay_en = true,
.rxclk_delay_en = true,
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
.mac06_exchange_dis = true,
};
/* QCA8337 GMAC6 is connected with QCA9558 over SGMII */
static struct ar8327_pad_cfg jwap230_qca8337_pad6_cfg = {
.mode = AR8327_PAD_MAC_SGMII,
.sgmii_delay_en = true,
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
};
static struct ar8327_platform_data jwap230_qca8337_data = {
.pad0_cfg = &jwap230_qca8337_pad0_cfg,
.pad6_cfg = &jwap230_qca8337_pad6_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
.port6_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
.led_cfg = &jwap230_qca8337_led_cfg,
.num_leds = ARRAY_SIZE(jwap230_leds_qca8337),
.leds = jwap230_leds_qca8337,
};
static struct mdio_board_info jwap230_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.mdio_addr = 0,
.platform_data = &jwap230_qca8337_data,
},
};
static void __init jwap230_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(jwap230_leds_gpio),
jwap230_leds_gpio);
mdiobus_register_board_info(jwap230_mdio0_info,
ARRAY_SIZE(jwap230_mdio0_info));
ath79_register_mdio(0, 0x0);
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
/* QCA9558 GMAC0 is connected to RMGII interface */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_pll_data.pll_1000 = 0xa6000000;
ath79_init_mac(ath79_eth0_data.mac_addr, art + JWAP230_MAC0_OFFSET, 0);
ath79_register_eth(0);
/* QCA9558 GMAC1 is connected to SGMII interface */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_eth1_pll_data.pll_1000 = 0x03000101;
ath79_init_mac(ath79_eth1_data.mac_addr, art + JWAP230_MAC1_OFFSET, 0);
ath79_register_eth(1);
ath79_register_wmac(art + JWAP230_WMAC_CALDATA_OFFSET, NULL);
ath79_register_pci();
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_JWAP230, "JWAP230", "jjPlus JWAP230", jwap230_setup);
|
