aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts/qca9563_tplink_eap2x5-1port.dtsi
blob: 0be46301f0aad505099d80075d4c7dee5ea41dc4 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "qca956x.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	aliases {
		label-mac-device = &eth0;
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "Reset button";
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};
	};
};

&pcie {
	status = "okay";
};

&uart {
	status = "okay";
};

&spi {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <25000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x000000 0x020000>;
				read-only;
			};

			partition@20000 {
				label = "partition-table";
				reg = <0x020000 0x010000>;
				read-only;
			};

			info: partition@30000 {
				label = "info";
				reg = <0x030000 0x010000>;
				read-only;
			};

			partition@40000 {
				compatible = "openwrt,elf";
				label = "firmware";
				reg = <0x040000 0xd80000>;
			};

			partition@dc0000 {
				label = "config";
				reg = <0xdc0000 0x030000>;
				read-only;
			};

			/* df0000-f30000 undefined in vendor firmware */

			partition@f30000 {
				label = "log";
				reg = <0xf30000 0x0c0000>;
				read-only;
			};

			art: partition@ff0000 {
				label = "art";
				reg = <0xff0000 0x010000>;
				read-only;
			};
		};
	};
};

&pinmux {
	mdio_pins: mdio_pins {
		/* GPIO 10 as MDIO(0x20), GPIO 8 as MDC(0x21) */
		pinctrl-single,bits = <0x8 0x00200021 0x00ff00ff>;
	};
};

&mdio0 {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&mdio_pins>;

	phy-mask = <0x10>;

	phy4: ethernet-phy@4 {
		reg = <4>;
		reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
	};
};

&eth0 {
	status = "okay";

	phy-handle = <&phy4>;
	phy-mode = "sgmii";

	mtd-mac-address = <&info 0x8>;

	qca956x-serdes-fixup;

	gmac-config {
		device = <&gmac>;
	};
};

&wmac {
	status = "okay";

	mtd-cal-data = <&art 0x1000>;
	mtd-mac-address = <&info 0x8>;
};