path: root/target/linux/bcm27xx/patches-5.4/950-0645-media-bcm2835-unicam-Use-dummy-buffer-if-none-have-b.patch

From 0eb6753788616ffed17a0484a14fd7d3df2a2a05 Mon Sep 17 00:00:00 2001
From: Naushir Patuck <naush@raspberrypi.com>
Date: Thu, 2 Apr 2020 16:08:51 +0100
Subject: [PATCH] media: bcm2835-unicam: Use dummy buffer if none have
 been queued

If no buffer has been queued by a userland application, we use an
internal dummy buffer for the hardware to spin in. This will allow
the driver to release the existing userland buffer back to the
application for processing.

Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
---
 .../media/platform/bcm2835/bcm2835-unicam.c   | 160 ++++++++++++------
 1 file changed, 110 insertions(+), 50 deletions(-)

--- a/drivers/media/platform/bcm2835/bcm2835-unicam.c
+++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c
@@ -47,6 +47,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -112,6 +113,12 @@ MODULE_PARM_DESC(debug, "Debug level 0-3
 /* Default size of the embedded buffer */
 #define UNICAM_EMBEDDED_SIZE	8192
 
+/*
+ * Size of the dummy buffer. Can be any size really, but the DMA
+ * allocation works in units of page sizes.
+ */
+#define DUMMY_BUF_SIZE	(PAGE_SIZE)
+
 enum pad_types {
 	IMAGE_PAD,
 	METADATA_PAD,
@@ -390,6 +397,12 @@ struct unicam_node {
 	struct media_pad pad;
 	struct v4l2_ctrl_handler ctrl_handler;
 	unsigned int embedded_lines;
+	/*
+	 * Dummy buffer intended to be used by unicam
+	 * if we have no other queued buffers to swap to.
+	 */
+	void *dummy_buf_cpu_addr;
+	dma_addr_t dummy_buf_dma_addr;
 };
 
 struct unicam_device {
@@ -661,27 +674,24 @@ static int unicam_reset_format(struct un
 	return 0;
 }
 
-static void unicam_wr_dma_addr(struct unicam_device *dev, dma_addr_t dmaaddr,
-			       int pad_id)
+static void unicam_wr_dma_addr(struct unicam_cfg *cfg, dma_addr_t dmaaddr,
+			       unsigned int buffer_size, int pad_id)
 {
-	dma_addr_t endaddr;
+	dma_addr_t endaddr = dmaaddr + buffer_size;
 
 	/*
-	 * dmaaddr should be a 32-bit address with the top two bits set to 0x3
-	 * to signify uncached access through the Videocore memory controller.
+	 * dmaaddr and endaddr should be a 32-bit address with the top two bits
+	 * set to 0x3 to signify uncached access through the Videocore memory
+	 * controller.
 	 */
-	BUG_ON((dmaaddr >> 30) != 0x3);
+	BUG_ON((dmaaddr >> 30) != 0x3 && (endaddr >> 30) != 0x3);
 
 	if (pad_id == IMAGE_PAD) {
-		endaddr = dmaaddr +
-			  dev->node[IMAGE_PAD].v_fmt.fmt.pix.sizeimage;
-		reg_write(&dev->cfg, UNICAM_IBSA0, dmaaddr);
-		reg_write(&dev->cfg, UNICAM_IBEA0, endaddr);
+		reg_write(cfg, UNICAM_IBSA0, dmaaddr);
+		reg_write(cfg, UNICAM_IBEA0, endaddr);
 	} else {
-		endaddr = dmaaddr +
-			  dev->node[METADATA_PAD].v_fmt.fmt.meta.buffersize;
-		reg_write(&dev->cfg, UNICAM_DBSA0, dmaaddr);
-		reg_write(&dev->cfg, UNICAM_DBEA0, endaddr);
+		reg_write(cfg, UNICAM_DBSA0, dmaaddr);
+		reg_write(cfg, UNICAM_DBEA0, endaddr);
 	}
 }
 
@@ -704,6 +714,7 @@ static inline void unicam_schedule_next_
 	struct unicam_device *dev = node->dev;
 	struct unicam_dmaqueue *dma_q = &node->dma_queue;
 	struct unicam_buffer *buf;
+	unsigned int size;
 	dma_addr_t addr;
 
 	buf = list_entry(dma_q->active.next, struct unicam_buffer, list);
@@ -711,7 +722,23 @@ static inline void unicam_schedule_next_
 	list_del(&buf->list);
 
 	addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0);
-	unicam_wr_dma_addr(dev, addr, node->pad_id);
+	size = (node->pad_id == IMAGE_PAD) ?
+			dev->node[IMAGE_PAD].v_fmt.fmt.pix.sizeimage :
+			dev->node[METADATA_PAD].v_fmt.fmt.meta.buffersize;
+
+	unicam_wr_dma_addr(&dev->cfg, addr, size, node->pad_id);
+}
+
+static inline void unicam_schedule_dummy_buffer(struct unicam_node *node)
+{
+	struct unicam_device *dev = node->dev;
+	dma_addr_t addr = node->dummy_buf_dma_addr;
+
+	unicam_dbg(3, dev, "Scheduling dummy buffer for node %d\n",
+		   node->pad_id);
+
+	unicam_wr_dma_addr(&dev->cfg, addr, DUMMY_BUF_SIZE, node->pad_id);
+	node->next_frm = NULL;
 }
 
 static inline void unicam_process_buffer_complete(struct unicam_node *node,
@@ -721,7 +748,6 @@ static inline void unicam_process_buffer
 	node->cur_frm->vb.sequence = sequence;
 
 	vb2_buffer_done(&node->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE);
-	node->cur_frm = node->next_frm;
 }
 
 static int unicam_num_nodes_streaming(struct unicam_device *dev)
@@ -788,6 +814,28 @@ static irqreturn_t unicam_isr(int irq, v
 	if (!(sta && (UNICAM_IS | UNICAM_PI0)))
 		return IRQ_HANDLED;
 
+	/*
+	 * We must run the frame end handler first. If we have a valid next_frm
+	 * and we get a simultaneout FE + FS interrupt, running the FS handler
+	 * first would null out the next_frm ptr and we would have lost the
+	 * buffer forever.
+	 */
+	if (ista & UNICAM_FEI || sta & UNICAM_PI0) {
+		/*
+		 * Ensure we have swapped buffers already as we can't
+		 * stop the peripheral. If no buffer is available, use a
+		 * dummy buffer to dump out frames until we get a new buffer
+		 * to use.
+		 */
+		for (i = 0; i < num_nodes_streaming; i++) {
+			if (unicam->node[i].cur_frm)
+				unicam_process_buffer_complete(&unicam->node[i],
+							       sequence);
+			unicam->node[i].cur_frm = unicam->node[i].next_frm;
+		}
+		unicam->sequence++;
+	}
+
 	if (ista & UNICAM_FSI) {
 		/*
 		 * Timestamp is to be when the first data byte was captured,
@@ -798,24 +846,16 @@ static irqreturn_t unicam_isr(int irq, v
 			if (unicam->node[i].cur_frm)
 				unicam->node[i].cur_frm->vb.vb2_buf.timestamp =
 								ts;
+			/*
+			 * Set the next frame output to go to a dummy frame
+			 * if we have not managed to obtain another frame
+			 * from the queue.
+			 */
+			unicam_schedule_dummy_buffer(&unicam->node[i]);
 		}
 	}
-	if (ista & UNICAM_FEI || sta & UNICAM_PI0) {
-		/*
-		 * Ensure we have swapped buffers already as we can't
-		 * stop the peripheral. Overwrite the frame we've just
-		 * captured instead.
-		 */
-		for (i = 0; i < num_nodes_streaming; i++) {
-			if (unicam->node[i].cur_frm &&
-			    unicam->node[i].cur_frm != unicam->node[i].next_frm)
-				unicam_process_buffer_complete(&unicam->node[i],
-							       sequence);
-		}
-		unicam->sequence++;
-	}
-
-	/* Cannot swap buffer at frame end, there may be a race condition
+	/*
+	 * Cannot swap buffer at frame end, there may be a race condition
 	 * where the HW does not actually swap it if the new frame has
 	 * already started.
 	 */
@@ -823,7 +863,7 @@ static irqreturn_t unicam_isr(int irq, v
 		for (i = 0; i < num_nodes_streaming; i++) {
 			spin_lock(&unicam->node[i].dma_queue_lock);
 			if (!list_empty(&unicam->node[i].dma_queue.active) &&
-			    unicam->node[i].cur_frm == unicam->node[i].next_frm)
+			    !unicam->node[i].next_frm)
 				unicam_schedule_next_buffer(&unicam->node[i]);
 			spin_unlock(&unicam->node[i].dma_queue_lock);
 		}
@@ -1352,7 +1392,7 @@ static void unicam_start_rx(struct unica
 {
 	struct unicam_cfg *cfg = &dev->cfg;
 	int line_int_freq = dev->node[IMAGE_PAD].v_fmt.fmt.pix.height >> 2;
-	unsigned int i;
+	unsigned int size, i;
 	u32 val;
 
 	if (line_int_freq < 128)
@@ -1413,7 +1453,7 @@ static void unicam_start_rx(struct unica
 	reg_write_field(cfg, UNICAM_ANA, 0, UNICAM_DDL);
 
 	/* Always start in trigger frame capture mode (UNICAM_FCM set) */
-	val = UNICAM_FSIE | UNICAM_FEIE | UNICAM_FCM;
+	val = UNICAM_FSIE | UNICAM_FEIE | UNICAM_FCM | UNICAM_IBOB;
 	set_field(&val,  line_int_freq, UNICAM_LCIE_MASK);
 	reg_write(cfg, UNICAM_ICTL, val);
 	reg_write(cfg, UNICAM_STA, UNICAM_STA_MASK_ALL);
@@ -1501,7 +1541,8 @@ static void unicam_start_rx(struct unica
 
 	reg_write(&dev->cfg, UNICAM_IBLS,
 		  dev->node[IMAGE_PAD].v_fmt.fmt.pix.bytesperline);
-	unicam_wr_dma_addr(dev, addr[IMAGE_PAD], IMAGE_PAD);
+	size = dev->node[IMAGE_PAD].v_fmt.fmt.pix.sizeimage;
+	unicam_wr_dma_addr(&dev->cfg, addr[IMAGE_PAD], size, IMAGE_PAD);
 	unicam_set_packing_config(dev);
 	unicam_cfg_image_id(dev);
 
@@ -1511,8 +1552,10 @@ static void unicam_start_rx(struct unica
 	reg_write(cfg, UNICAM_MISC, val);
 
 	if (dev->node[METADATA_PAD].streaming && dev->sensor_embedded_data) {
+		size = dev->node[METADATA_PAD].v_fmt.fmt.meta.buffersize;
 		unicam_enable_ed(dev);
-		unicam_wr_dma_addr(dev, addr[METADATA_PAD], METADATA_PAD);
+		unicam_wr_dma_addr(&dev->cfg, addr[METADATA_PAD], size,
+				   METADATA_PAD);
 	}
 
 	/* Enable peripheral */
@@ -1686,13 +1729,14 @@ static void unicam_stop_streaming(struct
 		unicam_runtime_put(dev);
 
 	} else if (node->pad_id == METADATA_PAD) {
-		/* Null out the embedded data buffer address so the HW does
-		 * not use it.  This is only really needed if the embedded data
-		 * pad is disabled before the image pad.  The 0x3 in the top two
-		 * bits signifies uncached accesses through the Videocore
-		 * memory controller.
+		/* Allow the hardware to spin in the dummy buffer.
+		 * This is only really needed if the embedded data pad is
+		 * disabled before the image pad.  The 0x3 in the top two bits
+		 * signifies uncached accesses through the Videocore memory
+		 * controller.
 		 */
-		unicam_wr_dma_addr(dev, 0xc0000000, METADATA_PAD);
+		unicam_wr_dma_addr(&dev->cfg, node->dummy_buf_dma_addr,
+				   DUMMY_BUF_SIZE, METADATA_PAD);
 	}
 
 	/* Clear all queued buffers for the node */
@@ -2321,6 +2365,15 @@ static int register_node(struct unicam_d
 	video_set_drvdata(vdev, node);
 	vdev->entity.flags |= MEDIA_ENT_FL_DEFAULT;
 
+	node->dummy_buf_cpu_addr = dma_alloc_coherent(&unicam->pdev->dev,
+						      DUMMY_BUF_SIZE,
+						      &node->dummy_buf_dma_addr,
+						      GFP_ATOMIC);
+	if (!node->dummy_buf_cpu_addr) {
+		unicam_err(unicam, "Unable to allocate dummy buffer.\n");
+		return -ENOMEM;
+	}
+
 	if (node->pad_id == METADATA_PAD ||
 	    !v4l2_subdev_has_op(unicam->sensor, video, s_std)) {
 		v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_STD);
@@ -2376,13 +2429,20 @@ static int register_node(struct unicam_d
 
 static void unregister_nodes(struct unicam_device *unicam)
 {
-	if (unicam->node[IMAGE_PAD].registered) {
-		video_unregister_device(&unicam->node[IMAGE_PAD].video_dev);
-		unicam->node[IMAGE_PAD].registered = 0;
-	}
-	if (unicam->node[METADATA_PAD].registered) {
-		video_unregister_device(&unicam->node[METADATA_PAD].video_dev);
-		unicam->node[METADATA_PAD].registered = 0;
+	struct unicam_node *node;
+	int i;
+
+	for (i = 0; i < MAX_NODES; i++) {
+		node = &unicam->node[i];
+		if (node->dummy_buf_cpu_addr) {
+			dma_free_coherent(&unicam->pdev->dev, DUMMY_BUF_SIZE,
+					  node->dummy_buf_cpu_addr,
+					  node->dummy_buf_dma_addr);
+		}
+		if (node->registered) {
+			video_unregister_device(&node->video_dev);
+			node->registered = 0;
+		}
 	}
 }