aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-5.4/950-0721-dtoverlays-Add-IMX477-sensor-overlay.patch
blob: 0d5ea3c188d2df101adf36e7cb5dc48dfd61bf7c (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
From 738defbb964c5d2a34b08c24ac0e7fd4afb16173 Mon Sep 17 00:00:00 2001
From: Naushir Patuck <naush@raspberrypi.com>
Date: Thu, 7 May 2020 15:50:04 +0100
Subject: [PATCH] dtoverlays: Add IMX477 sensor overlay

Add an overlay for the Sony IMX477 CMOS sensor device.
Also update overlay README and Makefile.

Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
---
 arch/arm/boot/dts/overlays/Makefile           |   1 +
 arch/arm/boot/dts/overlays/README             |   8 ++
 arch/arm/boot/dts/overlays/imx477-overlay.dts | 110 ++++++++++++++++++
 3 files changed, 119 insertions(+)
 create mode 100644 arch/arm/boot/dts/overlays/imx477-overlay.dts

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -85,6 +85,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	i2s-gpio28-31.dtbo \
 	ilitek251x.dtbo \
 	imx219.dtbo \
+	imx477.dtbo \
 	iqaudio-codec.dtbo \
 	iqaudio-dac.dtbo \
 	iqaudio-dacplus.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -1390,6 +1390,14 @@ Load:   dtoverlay=imx219
 Params: <None>
 
 
+Name:   imx477
+Info:   Sony IMX477 camera module.
+        Uses Unicam 1, which is the standard camera connector on most Pi
+        variants.
+Load:   dtoverlay=imx477
+Params: <None>
+
+
 Name:   iqaudio-codec
 Info:   Configures the IQaudio Codec audio card
 Load:   dtoverlay=iqaudio-codec
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/imx477-overlay.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Definitions for IMX477 camera module on VC I2C bus
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/{
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&i2c_csi_dsi>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			imx477: imx477@1a {
+				compatible = "sony,imx477";
+				reg = <0x1a>;
+				status = "okay";
+
+				clocks = <&imx477_clk>;
+				clock-names = "xclk";
+
+				VANA-supply = <&imx477_vana>;	/* 2.8v */
+				VDIG-supply = <&imx477_vdig>;	/* 1.05v */
+				VDDL-supply = <&imx477_vddl>;	/* 1.8v */
+
+				port {
+					imx477_0: endpoint {
+						remote-endpoint = <&csi1_ep>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+						clock-noncontinuous;
+						link-frequencies =
+							/bits/ 64 <450000000>;
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&csi1>;
+		__overlay__ {
+			status = "okay";
+
+			port {
+				csi1_ep: endpoint {
+					remote-endpoint = <&imx477_0>;
+				};
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&i2c0if>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@3 {
+		target-path="/";
+		__overlay__ {
+			imx477_vana: fixedregulator@0 {
+				compatible = "regulator-fixed";
+				regulator-name = "imx477_vana";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
+				enable-active-high;
+				startup-delay-us = <300000>;
+			};
+			imx477_vdig: fixedregulator@1 {
+				compatible = "regulator-fixed";
+				regulator-name = "imx477_vdig";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+			};
+			imx477_vddl: fixedregulator@2 {
+				compatible = "regulator-fixed";
+				regulator-name = "imx477_vddl";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+			imx477_clk: camera-clk {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+			};
+		};
+	};
+
+	fragment@4 {
+		target = <&i2c0mux>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@5 {
+		target-path="/__overrides__";
+		__overlay__ {
+			cam0-pwdn-ctrl = <&imx477_vana>,"gpio:0";
+			cam0-pwdn      = <&imx477_vana>,"gpio:4";
+		};
+	};
+};