1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
|
From 47f49370b3c1c7f4d4aae855966d2a3beef6c6d4 Mon Sep 17 00:00:00 2001
From: Andrey Konovalov <andrey.konovalov@linaro.org>
Date: Fri, 12 Jun 2020 15:53:48 +0200
Subject: [PATCH] media: i2c: imx290: fix reset GPIO pin handling
Commit 3909a92d7df622b41b9ceeeea694e641cad7667b upstream.
According to https://www.kernel.org/doc/Documentation/gpio/consumer.txt,
- all of the gpiod_set_value_xxx() functions operate with the *logical*
value. So in imx290_power_on() the reset signal should be cleared
(de-asserted) with gpiod_set_value_cansleep(imx290->rst_gpio, 0), and in
imx290_power_off() the value of 1 must be used to apply/assert the reset
to the sensor. In the device tree the reset pin is described as
GPIO_ACTIVE_LOW, and gpiod_set_value_xxx() functions take this into
account,
- when devm_gpiod_get_optional() is called with GPIOD_ASIS, the GPIO is
not initialized, and the direction must be set later; using a GPIO
without setting its direction first is illegal and will result in undefined
behavior. Fix this by using GPIOD_OUT_HIGH instead of GPIOD_ASIS (this
asserts the reset signal to the sensor initially).
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/media/i2c/imx290.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -628,7 +628,7 @@ static int imx290_power_on(struct device
}
usleep_range(1, 2);
- gpiod_set_value_cansleep(imx290->rst_gpio, 1);
+ gpiod_set_value_cansleep(imx290->rst_gpio, 0);
usleep_range(30000, 31000);
return 0;
@@ -641,7 +641,7 @@ static int imx290_power_off(struct devic
struct imx290 *imx290 = to_imx290(sd);
clk_disable_unprepare(imx290->xclk);
- gpiod_set_value_cansleep(imx290->rst_gpio, 0);
+ gpiod_set_value_cansleep(imx290->rst_gpio, 1);
regulator_bulk_disable(IMX290_NUM_SUPPLIES, imx290->supplies);
return 0;
@@ -757,7 +757,8 @@ static int imx290_probe(struct i2c_clien
goto free_err;
}
- imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS);
+ imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset",
+ GPIOD_OUT_HIGH);
if (IS_ERR(imx290->rst_gpio)) {
dev_err(dev, "Cannot get reset gpio\n");
ret = PTR_ERR(imx290->rst_gpio);
|
