path: root/target/linux/generic/patches-3.3/025-bcma_backport.patch

--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -29,7 +29,7 @@ config BCMA_HOST_PCI
 
 config BCMA_DRIVER_PCI_HOSTMODE
 	bool "Driver for PCI core working in hostmode"
-	depends on BCMA && MIPS
+	depends on BCMA && MIPS && BCMA_HOST_PCI
 	help
 	  PCI core hostmode operation (external PCI bus).
 
@@ -46,6 +46,33 @@ config BCMA_DRIVER_MIPS
 
 	  If unsure, say N
 
+config BCMA_SFLASH
+	bool
+	depends on BCMA_DRIVER_MIPS
+	default y
+
+config BCMA_NFLASH
+	bool
+	depends on BCMA_DRIVER_MIPS
+	default y
+
+config BCMA_DRIVER_GMAC_CMN
+	bool "BCMA Broadcom GBIT MAC COMMON core driver"
+	depends on BCMA
+	help
+	  Driver for the Broadcom GBIT MAC COMMON core attached to Broadcom
+	  specific Advanced Microcontroller Bus.
+
+	  If unsure, say N
+
+config BCMA_DRIVER_GPIO
+	bool "BCMA GPIO driver"
+	depends on BCMA && GPIOLIB
+	help
+	  Driver to provide access to the GPIO pins of the bcma bus.
+
+	  If unsure, say N
+
 config BCMA_DEBUG
 	bool "BCMA debugging"
 	depends on BCMA
--- a/drivers/bcma/Makefile
+++ b/drivers/bcma/Makefile
@@ -1,8 +1,12 @@
 bcma-y					+= main.o scan.o core.o sprom.o
 bcma-y					+= driver_chipcommon.o driver_chipcommon_pmu.o
+bcma-$(CONFIG_BCMA_SFLASH)		+= driver_chipcommon_sflash.o
+bcma-$(CONFIG_BCMA_NFLASH)		+= driver_chipcommon_nflash.o
 bcma-y					+= driver_pci.o
 bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE)	+= driver_pci_host.o
 bcma-$(CONFIG_BCMA_DRIVER_MIPS)		+= driver_mips.o
+bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN)	+= driver_gmac_cmn.o
+bcma-$(CONFIG_BCMA_DRIVER_GPIO)		+= driver_gpio.o
 bcma-$(CONFIG_BCMA_HOST_PCI)		+= host_pci.o
 bcma-$(CONFIG_BCMA_HOST_SOC)		+= host_soc.o
 obj-$(CONFIG_BCMA)			+= bcma.o
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -10,10 +10,19 @@
 
 #define BCMA_CORE_SIZE		0x1000
 
+#define bcma_err(bus, fmt, ...) \
+	pr_err("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
+#define bcma_warn(bus, fmt, ...) \
+	pr_warn("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
+#define bcma_info(bus, fmt, ...) \
+	pr_info("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
+#define bcma_debug(bus, fmt, ...) \
+	pr_debug("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
+
 struct bcma_bus;
 
 /* main.c */
-int bcma_bus_register(struct bcma_bus *bus);
+int __devinit bcma_bus_register(struct bcma_bus *bus);
 void bcma_bus_unregister(struct bcma_bus *bus);
 int __init bcma_bus_early_register(struct bcma_bus *bus,
 				   struct bcma_device *core_cc,
@@ -22,6 +31,8 @@ int __init bcma_bus_early_register(struc
 int bcma_bus_suspend(struct bcma_bus *bus);
 int bcma_bus_resume(struct bcma_bus *bus);
 #endif
+struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
+					u8 unit);
 
 /* scan.c */
 int bcma_bus_scan(struct bcma_bus *bus);
@@ -39,8 +50,32 @@ void bcma_chipco_serial_init(struct bcma
 #endif /* CONFIG_BCMA_DRIVER_MIPS */
 
 /* driver_chipcommon_pmu.c */
-u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
-u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
+u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
+u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
+
+#ifdef CONFIG_BCMA_SFLASH
+/* driver_chipcommon_sflash.c */
+int bcma_sflash_init(struct bcma_drv_cc *cc);
+extern struct platform_device bcma_sflash_dev;
+#else
+static inline int bcma_sflash_init(struct bcma_drv_cc *cc)
+{
+	bcma_err(cc->core->bus, "Serial flash not supported\n");
+	return 0;
+}
+#endif /* CONFIG_BCMA_SFLASH */
+
+#ifdef CONFIG_BCMA_NFLASH
+/* driver_chipcommon_nflash.c */
+int bcma_nflash_init(struct bcma_drv_cc *cc);
+extern struct platform_device bcma_nflash_dev;
+#else
+static inline int bcma_nflash_init(struct bcma_drv_cc *cc)
+{
+	bcma_err(cc->core->bus, "NAND flash not supported\n");
+	return 0;
+}
+#endif /* CONFIG_BCMA_NFLASH */
 
 #ifdef CONFIG_BCMA_HOST_PCI
 /* host_pci.c */
@@ -48,8 +83,24 @@ extern int __init bcma_host_pci_init(voi
 extern void __exit bcma_host_pci_exit(void);
 #endif /* CONFIG_BCMA_HOST_PCI */
 
+/* driver_pci.c */
+u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
+
+extern int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc);
+
 #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
+bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc);
+void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
 #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
 
+#ifdef CONFIG_BCMA_DRIVER_GPIO
+/* driver_gpio.c */
+int bcma_gpio_init(struct bcma_drv_cc *cc);
+#else
+static inline int bcma_gpio_init(struct bcma_drv_cc *cc)
+{
+	return -ENOTSUPP;
+}
+#endif /* CONFIG_BCMA_DRIVER_GPIO */
+
 #endif
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
@@ -30,6 +30,7 @@ void bcma_core_disable(struct bcma_devic
 	udelay(10);
 
 	bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+	bcma_aread32(core, BCMA_RESET_CTL);
 	udelay(1);
 }
 EXPORT_SYMBOL_GPL(bcma_core_disable);
@@ -64,7 +65,7 @@ void bcma_core_set_clockmode(struct bcma
 	switch (clkmode) {
 	case BCMA_CLKMODE_FAST:
 		bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
-		udelay(64);
+		usleep_range(64, 300);
 		for (i = 0; i < 1500; i++) {
 			if (bcma_read32(core, BCMA_CLKCTLST) &
 			    BCMA_CLKCTLST_HAVEHT) {
@@ -74,10 +75,10 @@ void bcma_core_set_clockmode(struct bcma
 			udelay(10);
 		}
 		if (i)
-			pr_err("HT force timeout\n");
+			bcma_err(core->bus, "HT force timeout\n");
 		break;
 	case BCMA_CLKMODE_DYNAMIC:
-		pr_warn("Dynamic clockmode not supported yet!\n");
+		bcma_set32(core, BCMA_CLKCTLST, ~BCMA_CLKCTLST_FORCEHT);
 		break;
 	}
 }
@@ -101,9 +102,9 @@ void bcma_core_pll_ctl(struct bcma_devic
 			udelay(10);
 		}
 		if (i)
-			pr_err("PLL enable timeout\n");
+			bcma_err(core->bus, "PLL enable timeout\n");
 	} else {
-		pr_warn("Disabling PLL not supported yet!\n");
+		bcma_warn(core->bus, "Disabling PLL not supported yet!\n");
 	}
 }
 EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
@@ -119,8 +120,8 @@ u32 bcma_core_dma_translation(struct bcm
 		else
 			return BCMA_DMA_TRANSLATION_DMA32_CMT;
 	default:
-		pr_err("DMA translation unknown for host %d\n",
-		       core->bus->hosttype);
+		bcma_err(core->bus, "DMA translation unknown for host %d\n",
+			 core->bus->hosttype);
 	}
 	return BCMA_DMA_TRANSLATION_NONE;
 }
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -4,12 +4,15 @@
  *
  * Copyright 2005, Broadcom Corporation
  * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 #include "bcma_private.h"
+#include <linux/bcm47xx_wdt.h>
 #include <linux/export.h>
+#include <linux/platform_device.h>
 #include <linux/bcma/bcma.h>
 
 static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
@@ -22,20 +25,120 @@ static inline u32 bcma_cc_write32_masked
 	return value;
 }
 
-void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
+u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
 {
-	u32 leddc_on = 10;
-	u32 leddc_off = 90;
+	if (cc->capabilities & BCMA_CC_CAP_PMU)
+		return bcma_pmu_get_alp_clock(cc);
 
-	if (cc->setup_done)
+	return 20000000;
+}
+EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
+
+static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+	u32 nb;
+
+	if (cc->capabilities & BCMA_CC_CAP_PMU) {
+		if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
+			nb = 32;
+		else if (cc->core->id.rev < 26)
+			nb = 16;
+		else
+			nb = (cc->core->id.rev >= 37) ? 32 : 24;
+	} else {
+		nb = 28;
+	}
+	if (nb == 32)
+		return 0xffffffff;
+	else
+		return (1 << nb) - 1;
+}
+
+static u32 bcma_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt,
+					      u32 ticks)
+{
+	struct bcma_drv_cc *cc = bcm47xx_wdt_get_drvdata(wdt);
+
+	return bcma_chipco_watchdog_timer_set(cc, ticks);
+}
+
+static u32 bcma_chipco_watchdog_timer_set_ms_wdt(struct bcm47xx_wdt *wdt,
+						 u32 ms)
+{
+	struct bcma_drv_cc *cc = bcm47xx_wdt_get_drvdata(wdt);
+	u32 ticks;
+
+	ticks = bcma_chipco_watchdog_timer_set(cc, cc->ticks_per_ms * ms);
+	return ticks / cc->ticks_per_ms;
+}
+
+static int bcma_chipco_watchdog_ticks_per_ms(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	if (cc->capabilities & BCMA_CC_CAP_PMU) {
+		if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
+			/* 4706 CC and PMU watchdogs are clocked at 1/4 of ALP clock */
+			return bcma_chipco_get_alp_clock(cc) / 4000;
+		else
+			/* based on 32KHz ILP clock */
+			return 32;
+	} else {
+		return bcma_chipco_get_alp_clock(cc) / 1000;
+	}
+}
+
+int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc)
+{
+	struct bcm47xx_wdt wdt = {};
+	struct platform_device *pdev;
+
+	wdt.driver_data = cc;
+	wdt.timer_set = bcma_chipco_watchdog_timer_set_wdt;
+	wdt.timer_set_ms = bcma_chipco_watchdog_timer_set_ms_wdt;
+	wdt.max_timer_ms = bcma_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms;
+
+	pdev = platform_device_register_data(NULL, "bcm47xx-wdt",
+					     cc->core->bus->num, &wdt,
+					     sizeof(wdt));
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	cc->watchdog = pdev;
+
+	return 0;
+}
+
+void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc)
+{
+	if (cc->early_setup_done)
 		return;
 
+	spin_lock_init(&cc->gpio_lock);
+
 	if (cc->core->id.rev >= 11)
 		cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
 	cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
 	if (cc->core->id.rev >= 35)
 		cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
 
+	if (cc->capabilities & BCMA_CC_CAP_PMU)
+		bcma_pmu_early_init(cc);
+
+	cc->early_setup_done = true;
+}
+
+void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
+{
+	u32 leddc_on = 10;
+	u32 leddc_off = 90;
+
+	if (cc->setup_done)
+		return;
+
+	bcma_core_chipcommon_early_init(cc);
+
 	if (cc->core->id.rev >= 20) {
 		bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
 		bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
@@ -44,7 +147,7 @@ void bcma_core_chipcommon_init(struct bc
 	if (cc->capabilities & BCMA_CC_CAP_PMU)
 		bcma_pmu_init(cc);
 	if (cc->capabilities & BCMA_CC_CAP_PCTL)
-		pr_err("Power control not implemented!\n");
+		bcma_err(cc->core->bus, "Power control not implemented!\n");
 
 	if (cc->core->id.rev >= 16) {
 		if (cc->core->bus->sprom.leddc_on_time &&
@@ -56,15 +159,33 @@ void bcma_core_chipcommon_init(struct bc
 			((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
 			 (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
 	}
+	cc->ticks_per_ms = bcma_chipco_watchdog_ticks_per_ms(cc);
 
 	cc->setup_done = true;
 }
 
 /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
-void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
+u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
 {
-	/* instant NMI */
-	bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
+	u32 maxt;
+	enum bcma_clkmode clkmode;
+
+	maxt = bcma_chipco_watchdog_get_max_timer(cc);
+	if (cc->capabilities & BCMA_CC_CAP_PMU) {
+		if (ticks == 1)
+			ticks = 2;
+		else if (ticks > maxt)
+			ticks = maxt;
+		bcma_cc_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks);
+	} else {
+		clkmode = ticks ? BCMA_CLKMODE_FAST : BCMA_CLKMODE_DYNAMIC;
+		bcma_core_set_clockmode(cc->core, clkmode);
+		if (ticks > maxt)
+			ticks = maxt;
+		/* instant NMI */
+		bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
+	}
+	return ticks;
 }
 
 void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
@@ -84,28 +205,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
 
 u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
 {
-	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
+	unsigned long flags;
+	u32 res;
+
+	spin_lock_irqsave(&cc->gpio_lock, flags);
+	res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
+	spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+	return res;
 }
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
 
 u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
 {
-	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
+	unsigned long flags;
+	u32 res;
+
+	spin_lock_irqsave(&cc->gpio_lock, flags);
+	res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
+	spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+	return res;
 }
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
 
+/*
+ * If the bit is set to 0, chipcommon controlls this GPIO,
+ * if the bit is set to 1, it is used by some part of the chip and not our code.
+ */
 u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
 {
-	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
+	unsigned long flags;
+	u32 res;
+
+	spin_lock_irqsave(&cc->gpio_lock, flags);
+	res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
+	spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+	return res;
 }
 EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
 
 u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
 {
-	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
+	unsigned long flags;
+	u32 res;
+
+	spin_lock_irqsave(&cc->gpio_lock, flags);
+	res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
+	spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+	return res;
 }
 
 u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
 {
-	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
+	unsigned long flags;
+	u32 res;
+
+	spin_lock_irqsave(&cc->gpio_lock, flags);
+	res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
+	spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+	return res;
+}
+
+u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	unsigned long flags;
+	u32 res;
+
+	if (cc->core->id.rev < 20)
+		return 0;
+
+	spin_lock_irqsave(&cc->gpio_lock, flags);
+	res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLUP, mask, value);
+	spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+	return res;
+}
+
+u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	unsigned long flags;
+	u32 res;
+
+	if (cc->core->id.rev < 20)
+		return 0;
+
+	spin_lock_irqsave(&cc->gpio_lock, flags);
+	res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLDOWN, mask, value);
+	spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+	return res;
 }
 
 #ifdef CONFIG_BCMA_DRIVER_MIPS
@@ -118,8 +310,7 @@ void bcma_chipco_serial_init(struct bcma
 	struct bcma_serial_port *ports = cc->serial_ports;
 
 	if (ccrev >= 11 && ccrev != 15) {
-		/* Fixed ALP clock */
-		baud_base = bcma_pmu_alp_clock(cc);
+		baud_base = bcma_chipco_get_alp_clock(cc);
 		if (ccrev >= 21) {
 			/* Turn off UART clock before switching clocksource. */
 			bcma_cc_write32(cc, BCMA_CC_CORECTL,
@@ -137,8 +328,7 @@ void bcma_chipco_serial_init(struct bcma
 				       | BCMA_CC_CORECTL_UARTCLKEN);
 		}
 	} else {
-		pr_err("serial not supported on this device ccrev: 0x%x\n",
-		       ccrev);
+		bcma_err(cc->core->bus, "serial not supported on this device ccrev: 0x%x\n", ccrev);
 		return;
 	}
 
--- /dev/null
+++ b/drivers/bcma/driver_chipcommon_nflash.c
@@ -0,0 +1,44 @@
+/*
+ * Broadcom specific AMBA
+ * ChipCommon NAND flash interface
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/bcma/bcma.h>
+
+#include "bcma_private.h"
+
+struct platform_device bcma_nflash_dev = {
+	.name		= "bcma_nflash",
+	.num_resources	= 0,
+};
+
+/* Initialize NAND flash access */
+int bcma_nflash_init(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 &&
+	    cc->core->id.rev != 0x38) {
+		bcma_err(bus, "NAND flash on unsupported board!\n");
+		return -ENOTSUPP;
+	}
+
+	if (!(cc->capabilities & BCMA_CC_CAP_NFLASH)) {
+		bcma_err(bus, "NAND flash not present according to ChipCommon\n");
+		return -ENODEV;
+	}
+
+	cc->nflash.present = true;
+	if (cc->core->id.rev == 38 &&
+	    (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT))
+		cc->nflash.boot = true;
+
+	/* Prepare platform device, but don't register it yet. It's too early,
+	 * malloc (required by device_private_init) is not available yet. */
+	bcma_nflash_dev.dev.platform_data = &cc->nflash;
+
+	return 0;
+}
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -3,7 +3,8 @@
  * ChipCommon Power Management Unit driver
  *
  * Copyright 2009, Michael Buesch <m@bues.ch>
- * Copyright 2007, Broadcom Corporation
+ * Copyright 2007, 2011, Broadcom Corporation
+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
@@ -12,12 +13,13 @@
 #include <linux/export.h>
 #include <linux/bcma/bcma.h>
 
-static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
+u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
 {
 	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
 	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
 	return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
 }
+EXPORT_SYMBOL_GPL(bcma_chipco_pll_read);
 
 void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
 {
@@ -54,38 +56,19 @@ void bcma_chipco_regctl_maskset(struct b
 }
 EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
 
-static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
-{
-	struct bcma_bus *bus = cc->core->bus;
-
-	switch (bus->chipinfo.id) {
-	case 0x4313:
-	case 0x4331:
-	case 43224:
-	case 43225:
-		break;
-	default:
-		pr_err("PLL init unknown for device 0x%04X\n",
-			bus->chipinfo.id);
-	}
-}
-
 static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;
 	u32 min_msk = 0, max_msk = 0;
 
 	switch (bus->chipinfo.id) {
-	case 0x4313:
+	case BCMA_CHIP_ID_BCM4313:
 		min_msk = 0x200D;
 		max_msk = 0xFFFF;
 		break;
-	case 43224:
-	case 43225:
-		break;
 	default:
-		pr_err("PMU resource config unknown for device 0x%04X\n",
-			bus->chipinfo.id);
+		bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n",
+			   bus->chipinfo.id);
 	}
 
 	/* Set the resource masks. */
@@ -93,22 +76,12 @@ static void bcma_pmu_resources_init(stru
 		bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
 	if (max_msk)
 		bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
-}
-
-void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
-{
-	struct bcma_bus *bus = cc->core->bus;
 
-	switch (bus->chipinfo.id) {
-	case 0x4313:
-	case 0x4331:
-	case 43224:
-	case 43225:
-		break;
-	default:
-		pr_err("PMU switch/regulators init unknown for device "
-			"0x%04X\n", bus->chipinfo.id);
-	}
+	/*
+	 * Add some delay; allow resources to come up and settle.
+	 * Delay is required for SoC (early init).
+	 */
+	mdelay(2);
 }
 
 /* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
@@ -122,51 +95,69 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
 		val |= BCMA_CHIPCTL_4331_EXTPA_EN;
 		if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11)
 			val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
+		else if (bus->chipinfo.rev > 0)
+			val |= BCMA_CHIPCTL_4331_EXTPA_EN2;
 	} else {
 		val &= ~BCMA_CHIPCTL_4331_EXTPA_EN;
+		val &= ~BCMA_CHIPCTL_4331_EXTPA_EN2;
 		val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
 	}
 	bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val);
 }
 
-void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
+static void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;
 
 	switch (bus->chipinfo.id) {
-	case 0x4313:
-		bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
+	case BCMA_CHIP_ID_BCM4313:
+		/* enable 12 mA drive strenth for 4313 and set chipControl
+		   register bit 1 */
+		bcma_chipco_chipctl_maskset(cc, 0,
+					    ~BCMA_CCTRL_4313_12MA_LED_DRIVE,
+					    BCMA_CCTRL_4313_12MA_LED_DRIVE);
 		break;
-	case 0x4331:
-		/* BCM4331 workaround is SPROM-related, we put it in sprom.c */
+	case BCMA_CHIP_ID_BCM4331:
+	case BCMA_CHIP_ID_BCM43431:
+		/* Ext PA lines must be enabled for tx on BCM4331 */
+		bcma_chipco_bcm4331_ext_pa_lines_ctl(cc, true);
 		break;
-	case 43224:
+	case BCMA_CHIP_ID_BCM43224:
+	case BCMA_CHIP_ID_BCM43421:
+		/* enable 12 mA drive strenth for 43224 and set chipControl
+		   register bit 15 */
 		if (bus->chipinfo.rev == 0) {
-			pr_err("Workarounds for 43224 rev 0 not fully "
-				"implemented\n");
-			bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0);
+			bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL,
+					  ~BCMA_CCTRL_43224_GPIO_TOGGLE,
+					  BCMA_CCTRL_43224_GPIO_TOGGLE);
+			bcma_chipco_chipctl_maskset(cc, 0,
+						    ~BCMA_CCTRL_43224A0_12MA_LED_DRIVE,
+						    BCMA_CCTRL_43224A0_12MA_LED_DRIVE);
 		} else {
-			bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
+			bcma_chipco_chipctl_maskset(cc, 0,
+						    ~BCMA_CCTRL_43224B0_12MA_LED_DRIVE,
+						    BCMA_CCTRL_43224B0_12MA_LED_DRIVE);
 		}
 		break;
-	case 43225:
-		break;
 	default:
-		pr_err("Workarounds unknown for device 0x%04X\n",
-			bus->chipinfo.id);
+		bcma_debug(bus, "Workarounds unknown or not needed for device 0x%04X\n",
+			   bus->chipinfo.id);
 	}
 }
 
-void bcma_pmu_init(struct bcma_drv_cc *cc)
+void bcma_pmu_early_init(struct bcma_drv_cc *cc)
 {
 	u32 pmucap;
 
 	pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
 	cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);
 
-	pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev,
-		 pmucap);
+	bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n",
+		   cc->pmu.rev, pmucap);
+}
 
+void bcma_pmu_init(struct bcma_drv_cc *cc)
+{
 	if (cc->pmu.rev == 1)
 		bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
 			      ~BCMA_CC_PMU_CTL_NOILPONW);
@@ -174,37 +165,47 @@ void bcma_pmu_init(struct bcma_drv_cc *c
 		bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
 			     BCMA_CC_PMU_CTL_NOILPONW);
 
-	if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2)
-		pr_err("Fix for 4329b0 bad LPOM state not implemented!\n");
-
-	bcma_pmu_pll_init(cc);
 	bcma_pmu_resources_init(cc);
-	bcma_pmu_swreg_init(cc);
 	bcma_pmu_workarounds(cc);
 }
 
-u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc)
+u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;
 
 	switch (bus->chipinfo.id) {
-	case 0x4716:
-	case 0x4748:
-	case 47162:
-	case 0x4313:
-	case 0x5357:
-	case 0x4749:
-	case 53572:
+	case BCMA_CHIP_ID_BCM4313:
+	case BCMA_CHIP_ID_BCM43224:
+	case BCMA_CHIP_ID_BCM43225:
+	case BCMA_CHIP_ID_BCM43227:
+	case BCMA_CHIP_ID_BCM43228:
+	case BCMA_CHIP_ID_BCM4331:
+	case BCMA_CHIP_ID_BCM43421:
+	case BCMA_CHIP_ID_BCM43428:
+	case BCMA_CHIP_ID_BCM43431:
+	case BCMA_CHIP_ID_BCM4716:
+	case BCMA_CHIP_ID_BCM47162:
+	case BCMA_CHIP_ID_BCM4748:
+	case BCMA_CHIP_ID_BCM4749:
+	case BCMA_CHIP_ID_BCM5357:
+	case BCMA_CHIP_ID_BCM53572:
+	case BCMA_CHIP_ID_BCM6362:
 		/* always 20Mhz */
 		return 20000 * 1000;
-	case 0x5356:
-	case 0x5300:
+	case BCMA_CHIP_ID_BCM4706:
+	case BCMA_CHIP_ID_BCM5356:
 		/* always 25Mhz */
 		return 25000 * 1000;
+	case BCMA_CHIP_ID_BCM43460:
+	case BCMA_CHIP_ID_BCM4352:
+	case BCMA_CHIP_ID_BCM4360:
+		if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
+			return 40000 * 1000;
+		else
+			return 20000 * 1000;
 	default:
-		pr_warn("No ALP clock specified for %04X device, "
-			"pmu rev. %d, using default %d Hz\n",
-			bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
+		bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
+			  bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
 	}
 	return BCMA_CC_PMU_ALP_CLOCK;
 }
@@ -212,7 +213,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
 /* Find the output of the "m" pll divider given pll controls that start with
  * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
  */
-static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
+static u32 bcma_pmu_pll_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
 {
 	u32 tmp, div, ndiv, p1, p2, fc;
 	struct bcma_bus *bus = cc->core->bus;
@@ -221,7 +222,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
 
 	BUG_ON(!m || m > 4);
 
-	if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) {
+	if (bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 ||
+	    bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) {
 		/* Detect failure in clock setting */
 		tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
 		if (tmp & 0x40000)
@@ -240,60 +242,95 @@ static u32 bcma_pmu_clock(struct bcma_dr
 	ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
 
 	/* Do calculation in Mhz */
-	fc = bcma_pmu_alp_clock(cc) / 1000000;
+	fc = bcma_pmu_get_alp_clock(cc) / 1000000;
 	fc = (p1 * ndiv * fc) / p2;
 
 	/* Return clock in Hertz */
 	return (fc / div) * 1000000;
 }
 
+static u32 bcma_pmu_pll_clock_bcm4706(struct bcma_drv_cc *cc, u32 pll0, u32 m)
+{
+	u32 tmp, ndiv, p1div, p2div;
+	u32 clock;
+
+	BUG_ON(!m || m > 4);
+
+	/* Get N, P1 and P2 dividers to determine CPU clock */
+	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PMU6_4706_PROCPLL_OFF);
+	ndiv = (tmp & BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK)
+		>> BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT;
+	p1div = (tmp & BCMA_CC_PMU6_4706_PROC_P1DIV_MASK)
+		>> BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT;
+	p2div = (tmp & BCMA_CC_PMU6_4706_PROC_P2DIV_MASK)
+		>> BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT;
+
+	tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+	if (tmp & BCMA_CC_CHIPST_4706_PKG_OPTION)
+		/* Low cost bonding: Fixed reference clock 25MHz and m = 4 */
+		clock = (25000000 / 4) * ndiv * p2div / p1div;
+	else
+		/* Fixed reference clock 25MHz and m = 2 */
+		clock = (25000000 / 2) * ndiv * p2div / p1div;
+
+	if (m == BCMA_CC_PMU5_MAINPLL_SSB)
+		clock = clock / 4;
+
+	return clock;
+}
+
 /* query bus clock frequency for PMU-enabled chipcommon */
-u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
+static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;
 
 	switch (bus->chipinfo.id) {
-	case 0x4716:
-	case 0x4748:
-	case 47162:
-		return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
-				      BCMA_CC_PMU5_MAINPLL_SSB);
-	case 0x5356:
-		return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
-				      BCMA_CC_PMU5_MAINPLL_SSB);
-	case 0x5357:
-	case 0x4749:
-		return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
-				      BCMA_CC_PMU5_MAINPLL_SSB);
-	case 0x5300:
-		return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0,
-				      BCMA_CC_PMU5_MAINPLL_SSB);
-	case 53572:
+	case BCMA_CHIP_ID_BCM4716:
+	case BCMA_CHIP_ID_BCM4748:
+	case BCMA_CHIP_ID_BCM47162:
+		return bcma_pmu_pll_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
+					  BCMA_CC_PMU5_MAINPLL_SSB);
+	case BCMA_CHIP_ID_BCM5356:
+		return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
+					  BCMA_CC_PMU5_MAINPLL_SSB);
+	case BCMA_CHIP_ID_BCM5357:
+	case BCMA_CHIP_ID_BCM4749:
+		return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
+					  BCMA_CC_PMU5_MAINPLL_SSB);
+	case BCMA_CHIP_ID_BCM4706:
+		return bcma_pmu_pll_clock_bcm4706(cc,
+						  BCMA_CC_PMU4706_MAINPLL_PLL0,
+						  BCMA_CC_PMU5_MAINPLL_SSB);
+	case BCMA_CHIP_ID_BCM53572:
 		return 75000000;
 	default:
-		pr_warn("No backplane clock specified for %04X device, "
-			"pmu rev. %d, using default %d Hz\n",
-			bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
+		bcma_warn(bus, "No bus clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
+			  bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
 	}
 	return BCMA_CC_PMU_HT_CLOCK;
 }
 
 /* query cpu clock frequency for PMU-enabled chipcommon */
-u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
+u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;
 
-	if (bus->chipinfo.id == 53572)
+	if (bus->chipinfo.id == BCMA_CHIP_ID_BCM53572)
 		return 300000000;
 
+	/* New PMUs can have different clock for bus and CPU */
 	if (cc->pmu.rev >= 5) {
 		u32 pll;
 		switch (bus->chipinfo.id) {
-		case 0x5356:
+		case BCMA_CHIP_ID_BCM4706:
+			return bcma_pmu_pll_clock_bcm4706(cc,
+						BCMA_CC_PMU4706_MAINPLL_PLL0,
+						BCMA_CC_PMU5_MAINPLL_CPU);
+		case BCMA_CHIP_ID_BCM5356:
 			pll = BCMA_CC_PMU5356_MAINPLL_PLL0;
 			break;
-		case 0x5357:
-		case 0x4749:
+		case BCMA_CHIP_ID_BCM5357:
+		case BCMA_CHIP_ID_BCM4749:
 			pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
 			break;
 		default:
@@ -301,10 +338,189 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
 			break;
 		}
 
-		/* TODO: if (bus->chipinfo.id == 0x5300)
-		  return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */
-		return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
+		return bcma_pmu_pll_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
+	}
+
+	/* On old PMUs CPU has the same clock as the bus */
+	return bcma_pmu_get_bus_clock(cc);
+}
+
+static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset,
+					 u32 value)
+{
+	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+	bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
+}
+
+void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid)
+{
+	u32 tmp = 0;
+	u8 phypll_offset = 0;
+	u8 bcm5357_bcm43236_p1div[] = {0x1, 0x5, 0x5};
+	u8 bcm5357_bcm43236_ndiv[] = {0x30, 0xf6, 0xfc};
+	struct bcma_bus *bus = cc->core->bus;
+
+	switch (bus->chipinfo.id) {
+	case BCMA_CHIP_ID_BCM5357:
+	case BCMA_CHIP_ID_BCM4749:
+	case BCMA_CHIP_ID_BCM53572:
+		/* 5357[ab]0, 43236[ab]0, and 6362b0 */
+
+		/* BCM5357 needs to touch PLL1_PLLCTL[02],
+		   so offset PLL0_PLLCTL[02] by 6 */
+		phypll_offset = (bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 ||
+		       bus->chipinfo.id == BCMA_CHIP_ID_BCM4749 ||
+		       bus->chipinfo.id == BCMA_CHIP_ID_BCM53572) ? 6 : 0;
+
+		/* RMW only the P1 divider */
+		bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
+				BCMA_CC_PMU_PLL_CTL0 + phypll_offset);
+		tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
+		tmp &= (~(BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK));
+		tmp |= (bcm5357_bcm43236_p1div[spuravoid] << BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT);
+		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
+
+		/* RMW only the int feedback divider */
+		bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
+				BCMA_CC_PMU_PLL_CTL2 + phypll_offset);
+		tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
+		tmp &= ~(BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK);
+		tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
+		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
+
+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+		break;
+
+	case BCMA_CHIP_ID_BCM4331:
+	case BCMA_CHIP_ID_BCM43431:
+		if (spuravoid == 2) {
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
+						     0x11500014);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+						     0x0FC00a08);
+		} else if (spuravoid == 1) {
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
+						     0x11500014);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+						     0x0F600a08);
+		} else {
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
+						     0x11100014);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+						     0x03000a08);
+		}
+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+		break;
+
+	case BCMA_CHIP_ID_BCM43224:
+	case BCMA_CHIP_ID_BCM43225:
+	case BCMA_CHIP_ID_BCM43421:
+		if (spuravoid == 1) {
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
+						     0x11500010);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
+						     0x000C0C06);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+						     0x0F600a08);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
+						     0x00000000);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
+						     0x2001E920);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+						     0x88888815);
+		} else {
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
+						     0x11100010);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
+						     0x000c0c06);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+						     0x03000a08);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
+						     0x00000000);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
+						     0x200005c0);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+						     0x88888815);
+		}
+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+		break;
+
+	case BCMA_CHIP_ID_BCM4716:
+	case BCMA_CHIP_ID_BCM4748:
+	case BCMA_CHIP_ID_BCM47162:
+		if (spuravoid == 1) {
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
+						     0x11500060);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
+						     0x080C0C06);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+						     0x0F600000);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
+						     0x00000000);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
+						     0x2001E924);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+						     0x88888815);
+		} else {
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
+						     0x11100060);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
+						     0x080c0c06);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+						     0x03000000);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
+						     0x00000000);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
+						     0x200005c0);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+						     0x88888815);
+		}
+
+		tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
+		break;
+
+	case BCMA_CHIP_ID_BCM43227:
+	case BCMA_CHIP_ID_BCM43228:
+	case BCMA_CHIP_ID_BCM43428:
+		/* LCNXN */
+		/* PLL Settings for spur avoidance on/off mode,
+		   no on2 support for 43228A0 */
+		if (spuravoid == 1) {
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
+						     0x01100014);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
+						     0x040C0C06);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+						     0x03140A08);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
+						     0x00333333);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
+						     0x202C2820);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+						     0x88888815);
+		} else {
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
+						     0x11100014);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
+						     0x040c0c06);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+						     0x03000a08);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
+						     0x00000000);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
+						     0x200005c0);
+			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+						     0x88888815);
+		}
+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+		break;
+	default:
+		bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+			 bus->chipinfo.id);
+		break;
 	}
 
-	return bcma_pmu_get_clockcontrol(cc);
+	tmp |= bcma_cc_read32(cc, BCMA_CC_PMU_CTL);
+	bcma_cc_write32(cc, BCMA_CC_PMU_CTL, tmp);
 }
+EXPORT_SYMBOL_GPL(bcma_pmu_spuravoid_pllupdate);
--- /dev/null
+++ b/drivers/bcma/driver_chipcommon_sflash.c
@@ -0,0 +1,165 @@
+/*
+ * Broadcom specific AMBA
+ * ChipCommon serial flash interface
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/bcma/bcma.h>
+
+#include "bcma_private.h"
+
+static struct resource bcma_sflash_resource = {
+	.name	= "bcma_sflash",
+	.start	= BCMA_SOC_FLASH2,
+	.end	= 0,
+	.flags  = IORESOURCE_MEM | IORESOURCE_READONLY,
+};
+
+struct platform_device bcma_sflash_dev = {
+	.name		= "bcma_sflash",
+	.resource	= &bcma_sflash_resource,
+	.num_resources	= 1,
+};
+
+struct bcma_sflash_tbl_e {
+	char *name;
+	u32 id;
+	u32 blocksize;
+	u16 numblocks;
+};
+
+static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+	{ "M25P20", 0x11, 0x10000, 4, },
+	{ "M25P40", 0x12, 0x10000, 8, },
+
+	{ "M25P16", 0x14, 0x10000, 32, },
+	{ "M25P32", 0x15, 0x10000, 64, },
+	{ "M25P64", 0x16, 0x10000, 128, },
+	{ "M25FL128", 0x17, 0x10000, 256, },
+	{ 0 },
+};
+
+static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+	{ "SST25WF512", 1, 0x1000, 16, },
+	{ "SST25VF512", 0x48, 0x1000, 16, },
+	{ "SST25WF010", 2, 0x1000, 32, },
+	{ "SST25VF010", 0x49, 0x1000, 32, },
+	{ "SST25WF020", 3, 0x1000, 64, },
+	{ "SST25VF020", 0x43, 0x1000, 64, },
+	{ "SST25WF040", 4, 0x1000, 128, },
+	{ "SST25VF040", 0x44, 0x1000, 128, },
+	{ "SST25VF040B", 0x8d, 0x1000, 128, },
+	{ "SST25WF080", 5, 0x1000, 256, },
+	{ "SST25VF080B", 0x8e, 0x1000, 256, },
+	{ "SST25VF016", 0x41, 0x1000, 512, },
+	{ "SST25VF032", 0x4a, 0x1000, 1024, },
+	{ "SST25VF064", 0x4b, 0x1000, 2048, },
+	{ 0 },
+};
+
+static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+	{ "AT45DB011", 0xc, 256, 512, },
+	{ "AT45DB021", 0x14, 256, 1024, },
+	{ "AT45DB041", 0x1c, 256, 2048, },
+	{ "AT45DB081", 0x24, 256, 4096, },
+	{ "AT45DB161", 0x2c, 512, 4096, },
+	{ "AT45DB321", 0x34, 512, 8192, },
+	{ "AT45DB642", 0x3c, 1024, 8192, },
+	{ 0 },
+};
+
+static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
+{
+	int i;
+	bcma_cc_write32(cc, BCMA_CC_FLASHCTL,
+			BCMA_CC_FLASHCTL_START | opcode);
+	for (i = 0; i < 1000; i++) {
+		if (!(bcma_cc_read32(cc, BCMA_CC_FLASHCTL) &
+		      BCMA_CC_FLASHCTL_BUSY))
+			return;
+		cpu_relax();
+	}
+	bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
+}
+
+/* Initialize serial flash access */
+int bcma_sflash_init(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+	struct bcma_sflash *sflash = &cc->sflash;
+	struct bcma_sflash_tbl_e *e;
+	u32 id, id2;
+
+	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
+	case BCMA_CC_FLASHT_STSER:
+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP);
+
+		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0);
+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
+		id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
+
+		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1);
+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
+		id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
+
+		switch (id) {
+		case 0xbf:
+			for (e = bcma_sflash_sst_tbl; e->name; e++) {
+				if (e->id == id2)
+					break;
+			}
+			break;
+		case 0x13:
+			return -ENOTSUPP;
+		default:
+			for (e = bcma_sflash_st_tbl; e->name; e++) {
+				if (e->id == id)
+					break;
+			}
+			break;
+		}
+		if (!e->name) {
+			bcma_err(bus, "Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", id, id2);
+			return -ENOTSUPP;
+		}
+
+		break;
+	case BCMA_CC_FLASHT_ATSER:
+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
+		id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c;
+
+		for (e = bcma_sflash_at_tbl; e->name; e++) {
+			if (e->id == id)
+				break;
+		}
+		if (!e->name) {
+			bcma_err(bus, "Unsupported Atmel serial flash (id: 0x%X)\n", id);
+			return -ENOTSUPP;
+		}
+
+		break;
+	default:
+		bcma_err(bus, "Unsupported flash type\n");
+		return -ENOTSUPP;
+	}
+
+	sflash->window = BCMA_SOC_FLASH2;
+	sflash->blocksize = e->blocksize;
+	sflash->numblocks = e->numblocks;
+	sflash->size = sflash->blocksize * sflash->numblocks;
+	sflash->present = true;
+
+	bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
+		  e->name, sflash->size / 1024, sflash->blocksize,
+		  sflash->numblocks);
+
+	/* Prepare platform device, but don't register it yet. It's too early,
+	 * malloc (required by device_private_init) is not available yet. */
+	bcma_sflash_dev.resource[0].end = bcma_sflash_dev.resource[0].start +
+					  sflash->size;
+	bcma_sflash_dev.dev.platform_data = sflash;
+
+	return 0;
+}
--- /dev/null
+++ b/drivers/bcma/driver_gmac_cmn.c
@@ -0,0 +1,14 @@
+/*
+ * Broadcom specific AMBA
+ * GBIT MAC COMMON Core
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+void __devinit bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc)
+{
+	mutex_init(&gc->phy_mutex);
+}
--- /dev/null
+++ b/drivers/bcma/driver_gpio.c
@@ -0,0 +1,98 @@
+/*
+ * Broadcom specific AMBA
+ * GPIO driver
+ *
+ * Copyright 2011, Broadcom Corporation
+ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/gpio.h>
+#include <linux/export.h>
+#include <linux/bcma/bcma.h>
+
+#include "bcma_private.h"
+
+static inline struct bcma_drv_cc *bcma_gpio_get_cc(struct gpio_chip *chip)
+{
+	return container_of(chip, struct bcma_drv_cc, gpio);
+}
+
+static int bcma_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
+
+	return !!bcma_chipco_gpio_in(cc, 1 << gpio);
+}
+
+static void bcma_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
+				int value)
+{
+	struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
+
+	bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0);
+}
+
+static int bcma_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
+
+	bcma_chipco_gpio_outen(cc, 1 << gpio, 0);
+	return 0;
+}
+
+static int bcma_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
+				      int value)
+{
+	struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
+
+	bcma_chipco_gpio_outen(cc, 1 << gpio, 1 << gpio);
+	bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0);
+	return 0;
+}
+
+static int bcma_gpio_request(struct gpio_chip *chip, unsigned gpio)
+{
+	struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
+
+	bcma_chipco_gpio_control(cc, 1 << gpio, 0);
+	/* clear pulldown */
+	bcma_chipco_gpio_pulldown(cc, 1 << gpio, 0);
+	/* Set pullup */
+	bcma_chipco_gpio_pullup(cc, 1 << gpio, 1 << gpio);
+
+	return 0;
+}
+
+static void bcma_gpio_free(struct gpio_chip *chip, unsigned gpio)
+{
+	struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
+
+	/* clear pullup */
+	bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
+}
+
+int bcma_gpio_init(struct bcma_drv_cc *cc)
+{
+	struct gpio_chip *chip = &cc->gpio;
+
+	chip->label		= "bcma_gpio";
+	chip->owner		= THIS_MODULE;
+	chip->request		= bcma_gpio_request;
+	chip->free		= bcma_gpio_free;
+	chip->get		= bcma_gpio_get_value;
+	chip->set		= bcma_gpio_set_value;
+	chip->direction_input	= bcma_gpio_direction_input;
+	chip->direction_output	= bcma_gpio_direction_output;
+	chip->ngpio		= 16;
+	/* There is just one SoC in one device and its GPIO addresses should be
+	 * deterministic to address them more easily. The other buses could get
+	 * a random base number. */
+	if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
+		chip->base		= 0;
+	else
+		chip->base		= -1;
+
+	return gpiochip_add(chip);
+}
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
@@ -22,15 +22,15 @@
 /* The 47162a0 hangs when reading MIPS DMP registers registers */
 static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
 {
-	return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 &&
-	       dev->id.id == BCMA_CORE_MIPS_74K;
+	return dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM47162 &&
+	       dev->bus->chipinfo.rev == 0 && dev->id.id == BCMA_CORE_MIPS_74K;
 }
 
 /* The 5357b0 hangs when reading USB20H DMP registers */
 static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev)
 {
-	return (dev->bus->chipinfo.id == 0x5357 ||
-		dev->bus->chipinfo.id == 0x4749) &&
+	return (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 ||
+		dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) &&
 	       dev->bus->chipinfo.pkg == 11 &&
 	       dev->id.id == BCMA_CORE_USB20_HOST;
 }
@@ -74,11 +74,16 @@ static u32 bcma_core_mips_irqflag(struct
 		return dev->core_index;
 	flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
 
-	return flag & 0x1F;
+	if (flag)
+		return flag & 0x1F;
+	else
+		return 0x3f;
 }
 
 /* Get the MIPS IRQ assignment for a specified device.
  * If unassigned, 0 is returned.
+ * If disabled, 5 is returned.
+ * If not supported, 6 is returned.
  */
 unsigned int bcma_core_mips_irq(struct bcma_device *dev)
 {
@@ -87,13 +92,15 @@ unsigned int bcma_core_mips_irq(struct b
 	unsigned int irq;
 
 	irqflag = bcma_core_mips_irqflag(dev);
+	if (irqflag == 0x3f)
+		return 6;
 
-	for (irq = 1; irq <= 4; irq++)
+	for (irq = 0; irq <= 4; irq++)
 		if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) &
 		    (1 << irqflag))
 			return irq;
 
-	return 0;
+	return 5;
 }
 EXPORT_SYMBOL(bcma_core_mips_irq);
 
@@ -114,8 +121,8 @@ static void bcma_core_mips_set_irq(struc
 		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
 			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
 			    ~(1 << irqflag));
-	else
-		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
+	else if (oldirq != 5)
+		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0);
 
 	/* assign the new one */
 	if (irq == 0) {
@@ -123,17 +130,17 @@ static void bcma_core_mips_set_irq(struc
 			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
 			    (1 << irqflag));
 	} else {
-		u32 oldirqflag = bcma_read32(mdev,
-					     BCMA_MIPS_MIPS74K_INTMASK(irq));
-		if (oldirqflag) {
+		u32 irqinitmask = bcma_read32(mdev,
+					      BCMA_MIPS_MIPS74K_INTMASK(irq));
+		if (irqinitmask) {
 			struct bcma_device *core;
 
 			/* backplane irq line is in use, find out who uses
 			 * it and set user to irq 0
 			 */
-			list_for_each_entry_reverse(core, &bus->cores, list) {
+			list_for_each_entry(core, &bus->cores, list) {
 				if ((1 << bcma_core_mips_irqflag(core)) ==
-				    oldirqflag) {
+				    irqinitmask) {
 					bcma_core_mips_set_irq(core, 0);
 					break;
 				}
@@ -143,15 +150,31 @@ static void bcma_core_mips_set_irq(struc
 			     1 << irqflag);
 	}
 
-	pr_info("set_irq: core 0x%04x, irq %d => %d\n",
-		dev->id.id, oldirq + 2, irq + 2);
+	bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n",
+		   dev->id.id, oldirq <= 4 ? oldirq + 2 : 0, irq + 2);
+}
+
+static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq,
+					u16 coreid, u8 unit)
+{
+	struct bcma_device *core;
+
+	core = bcma_find_core_unit(bus, coreid, unit);
+	if (!core) {
+		bcma_warn(bus,
+			  "Can not find core (id: 0x%x, unit %i) for IRQ configuration.\n",
+			  coreid, unit);
+		return;
+	}
+
+	bcma_core_mips_set_irq(core, irq);
 }
 
 static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
 {
 	int i;
 	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
-	printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
+	printk(KERN_DEBUG KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
 	for (i = 0; i <= 6; i++)
 		printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
 	printk("\n");
@@ -161,7 +184,7 @@ static void bcma_core_mips_dump_irq(stru
 {
 	struct bcma_device *core;
 
-	list_for_each_entry_reverse(core, &bus->cores, list) {
+	list_for_each_entry(core, &bus->cores, list) {
 		bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
 	}
 }
@@ -171,9 +194,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
 	struct bcma_bus *bus = mcore->core->bus;
 
 	if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
-		return bcma_pmu_get_clockcpu(&bus->drv_cc);
+		return bcma_pmu_get_cpu_clock(&bus->drv_cc);
 
-	pr_err("No PMU available, need this to get the cpu clock\n");
+	bcma_err(bus, "No PMU available, need this to get the cpu clock\n");
 	return 0;
 }
 EXPORT_SYMBOL(bcma_cpu_clock);
@@ -181,76 +204,109 @@ EXPORT_SYMBOL(bcma_cpu_clock);
 static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
 {
 	struct bcma_bus *bus = mcore->core->bus;
+	struct bcma_drv_cc *cc = &bus->drv_cc;
 
-	switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
+	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
 	case BCMA_CC_FLASHT_STSER:
 	case BCMA_CC_FLASHT_ATSER:
-		pr_err("Serial flash not supported.\n");
+		bcma_debug(bus, "Found serial flash\n");
+		bcma_sflash_init(cc);
 		break;
 	case BCMA_CC_FLASHT_PARA:
-		pr_info("found parallel flash.\n");
-		bus->drv_cc.pflash.window = 0x1c000000;
-		bus->drv_cc.pflash.window_size = 0x02000000;
+		bcma_debug(bus, "Found parallel flash\n");
+		cc->pflash.present = true;
+		cc->pflash.window = BCMA_SOC_FLASH2;
+		cc->pflash.window_size = BCMA_SOC_FLASH2_SZ;
 
-		if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
+		if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) &
 		     BCMA_CC_FLASH_CFG_DS) == 0)
-			bus->drv_cc.pflash.buswidth = 1;
+			cc->pflash.buswidth = 1;
 		else
-			bus->drv_cc.pflash.buswidth = 2;
+			cc->pflash.buswidth = 2;
 		break;
 	default:
-		pr_err("flash not supported.\n");
+		bcma_err(bus, "Flash type not supported\n");
+	}
+
+	if (cc->core->id.rev == 38 ||
+	    bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
+		if (cc->capabilities & BCMA_CC_CAP_NFLASH) {
+			bcma_debug(bus, "Found NAND flash\n");
+			bcma_nflash_init(cc);
+		}
 	}
 }
 
+void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
+{
+	struct bcma_bus *bus = mcore->core->bus;
+
+	if (mcore->early_setup_done)
+		return;
+
+	bcma_chipco_serial_init(&bus->drv_cc);
+	bcma_core_mips_flash_detect(mcore);
+
+	mcore->early_setup_done = true;
+}
+
 void bcma_core_mips_init(struct bcma_drv_mips *mcore)
 {
 	struct bcma_bus *bus;
 	struct bcma_device *core;
 	bus = mcore->core->bus;
 
-	pr_info("Initializing MIPS core...\n");
+	if (mcore->setup_done)
+		return;
+
+	bcma_debug(bus, "Initializing MIPS core...\n");
 
-	if (!mcore->setup_done)
-		mcore->assigned_irqs = 1;
+	bcma_core_mips_early_init(mcore);
 
-	/* Assign IRQs to all cores on the bus */
-	list_for_each_entry_reverse(core, &bus->cores, list) {
-		int mips_irq;
-		if (core->irq)
-			continue;
-
-		mips_irq = bcma_core_mips_irq(core);
-		if (mips_irq > 4)
-			core->irq = 0;
-		else
-			core->irq = mips_irq + 2;
-		if (core->irq > 5)
-			continue;
-		switch (core->id.id) {
-		case BCMA_CORE_PCI:
-		case BCMA_CORE_PCIE:
-		case BCMA_CORE_ETHERNET:
-		case BCMA_CORE_ETHERNET_GBIT:
-		case BCMA_CORE_MAC_GBIT:
-		case BCMA_CORE_80211:
-		case BCMA_CORE_USB20_HOST:
-			/* These devices get their own IRQ line if available,
-			 * the rest goes on IRQ0
-			 */
-			if (mcore->assigned_irqs <= 4)
-				bcma_core_mips_set_irq(core,
-						       mcore->assigned_irqs++);
-			break;
+	switch (bus->chipinfo.id) {
+	case BCMA_CHIP_ID_BCM4716:
+	case BCMA_CHIP_ID_BCM4748:
+		bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
+		bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
+		bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0);
+		bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_PCIE, 0);
+		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
+		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0);
+		break;
+	case BCMA_CHIP_ID_BCM5356:
+	case BCMA_CHIP_ID_BCM47162:
+	case BCMA_CHIP_ID_BCM53572:
+		bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
+		bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
+		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
+		break;
+	case BCMA_CHIP_ID_BCM5357:
+	case BCMA_CHIP_ID_BCM4749:
+		bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
+		bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
+		bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0);
+		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
+		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0);
+		break;
+	case BCMA_CHIP_ID_BCM4706:
+		bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_PCIE, 0);
+		bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_4706_MAC_GBIT,
+					    0);
+		bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_PCIE, 1);
+		bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_USB20_HOST, 0);
+		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_4706_CHIPCOMMON,
+					    0);
+		break;
+	default:
+		list_for_each_entry(core, &bus->cores, list) {
+			core->irq = bcma_core_mips_irq(core) + 2;
 		}
+		bcma_err(bus,
+			 "Unknown device (0x%x) found, can not configure IRQs\n",
+			 bus->chipinfo.id);
 	}
-	pr_info("IRQ reconfiguration done\n");
+	bcma_debug(bus, "IRQ reconfiguration done\n");
 	bcma_core_mips_dump_irq(bus);
 
-	if (mcore->setup_done)
-		return;
-
-	bcma_chipco_serial_init(&bus->drv_cc);
-	bcma_core_mips_flash_detect(mcore);
 	mcore->setup_done = true;
 }
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -2,8 +2,9 @@
  * Broadcom specific AMBA
  * PCI Core
  *
- * Copyright 2005, Broadcom Corporation
+ * Copyright 2005, 2011, Broadcom Corporation
  * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
@@ -16,120 +17,124 @@
  * R/W ops.
  **************************************************/
 
-static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address)
+u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address)
 {
-	pcicore_write32(pc, 0x130, address);
-	pcicore_read32(pc, 0x130);
-	return pcicore_read32(pc, 0x134);
+	pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address);
+	pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR);
+	return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA);
 }
 
-#if 0
 static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data)
 {
-	pcicore_write32(pc, 0x130, address);
-	pcicore_read32(pc, 0x130);
-	pcicore_write32(pc, 0x134, data);
+	pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address);
+	pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR);
+	pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data);
 }
-#endif
 
 static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy)
 {
-	const u16 mdio_control = 0x128;
-	const u16 mdio_data = 0x12C;
 	u32 v;
 	int i;
 
-	v = (1 << 30); /* Start of Transaction */
-	v |= (1 << 28); /* Write Transaction */
-	v |= (1 << 17); /* Turnaround */
-	v |= (0x1F << 18);
+	v = BCMA_CORE_PCI_MDIODATA_START;
+	v |= BCMA_CORE_PCI_MDIODATA_WRITE;
+	v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
+	      BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
+	v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR <<
+	      BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
+	v |= BCMA_CORE_PCI_MDIODATA_TA;
 	v |= (phy << 4);
-	pcicore_write32(pc, mdio_data, v);
+	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v);
 
 	udelay(10);
 	for (i = 0; i < 200; i++) {
-		v = pcicore_read32(pc, mdio_control);
-		if (v & 0x100 /* Trans complete */)
+		v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
+		if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
 			break;
-		msleep(1);
+		usleep_range(1000, 2000);
 	}
 }
 
 static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
 {
-	const u16 mdio_control = 0x128;
-	const u16 mdio_data = 0x12C;
 	int max_retries = 10;
 	u16 ret = 0;
 	u32 v;
 	int i;
 
-	v = 0x80; /* Enable Preamble Sequence */
-	v |= 0x2; /* MDIO Clock Divisor */
-	pcicore_write32(pc, mdio_control, v);
+	/* enable mdio access to SERDES */
+	v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN;
+	v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL;
+	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v);
 
 	if (pc->core->id.rev >= 10) {
 		max_retries = 200;
 		bcma_pcie_mdio_set_phy(pc, device);
+		v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
+		     BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
+		v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
+	} else {
+		v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD);
+		v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
 	}
 
-	v = (1 << 30); /* Start of Transaction */
-	v |= (1 << 29); /* Read Transaction */
-	v |= (1 << 17); /* Turnaround */
-	if (pc->core->id.rev < 10)
-		v |= (u32)device << 22;
-	v |= (u32)address << 18;
-	pcicore_write32(pc, mdio_data, v);
+	v = BCMA_CORE_PCI_MDIODATA_START;
+	v |= BCMA_CORE_PCI_MDIODATA_READ;
+	v |= BCMA_CORE_PCI_MDIODATA_TA;
+
+	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v);
 	/* Wait for the device to complete the transaction */
 	udelay(10);
 	for (i = 0; i < max_retries; i++) {
-		v = pcicore_read32(pc, mdio_control);
-		if (v & 0x100 /* Trans complete */) {
+		v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
+		if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) {
 			udelay(10);
-			ret = pcicore_read32(pc, mdio_data);
+			ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA);
 			break;
 		}
-		msleep(1);
+		usleep_range(1000, 2000);
 	}
-	pcicore_write32(pc, mdio_control, 0);
+	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
 	return ret;
 }
 
 static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device,
 				u8 address, u16 data)
 {
-	const u16 mdio_control = 0x128;
-	const u16 mdio_data = 0x12C;
 	int max_retries = 10;
 	u32 v;
 	int i;
 
-	v = 0x80; /* Enable Preamble Sequence */
-	v |= 0x2; /* MDIO Clock Divisor */
-	pcicore_write32(pc, mdio_control, v);
+	/* enable mdio access to SERDES */
+	v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN;
+	v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL;
+	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v);
 
 	if (pc->core->id.rev >= 10) {
 		max_retries = 200;
 		bcma_pcie_mdio_set_phy(pc, device);
+		v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
+		     BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
+		v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
+	} else {
+		v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD);
+		v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
 	}
 
-	v = (1 << 30); /* Start of Transaction */
-	v |= (1 << 28); /* Write Transaction */
-	v |= (1 << 17); /* Turnaround */
-	if (pc->core->id.rev < 10)
-		v |= (u32)device << 22;
-	v |= (u32)address << 18;
+	v = BCMA_CORE_PCI_MDIODATA_START;
+	v |= BCMA_CORE_PCI_MDIODATA_WRITE;
+	v |= BCMA_CORE_PCI_MDIODATA_TA;
 	v |= data;
-	pcicore_write32(pc, mdio_data, v);
+	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v);
 	/* Wait for the device to complete the transaction */
 	udelay(10);
 	for (i = 0; i < max_retries; i++) {
-		v = pcicore_read32(pc, mdio_control);
-		if (v & 0x100 /* Trans complete */)
+		v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
+		if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
 			break;
-		msleep(1);
+		usleep_range(1000, 2000);
 	}
-	pcicore_write32(pc, mdio_control, 0);
+	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
 }
 
 /**************************************************
@@ -138,88 +143,108 @@ static void bcma_pcie_mdio_write(struct
 
 static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc)
 {
-	return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
+	u32 tmp;
+
+	tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG);
+	if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT)
+		return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE |
+		       BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY;
+	else
+		return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE;
 }
 
 static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc)
 {
-	const u8 serdes_pll_device = 0x1D;
-	const u8 serdes_rx_device = 0x1F;
 	u16 tmp;
 
-	bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
-			      bcma_pcicore_polarity_workaround(pc));
-	tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
-	if (tmp & 0x4000)
-		bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
+	bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX,
+	                     BCMA_CORE_PCI_SERDES_RX_CTRL,
+			     bcma_pcicore_polarity_workaround(pc));
+	tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL,
+	                          BCMA_CORE_PCI_SERDES_PLL_CTRL);
+	if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN)
+		bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL,
+		                     BCMA_CORE_PCI_SERDES_PLL_CTRL,
+		                     tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN);
+}
+
+static void bcma_core_pci_fixcfg(struct bcma_drv_pci *pc)
+{
+	struct bcma_device *core = pc->core;
+	u16 val16, core_index;
+	uint regoff;
+
+	regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_PI_OFFSET);
+	core_index = (u16)core->core_index;
+
+	val16 = pcicore_read16(pc, regoff);
+	if (((val16 & BCMA_CORE_PCI_SPROM_PI_MASK) >> BCMA_CORE_PCI_SPROM_PI_SHIFT)
+	     != core_index) {
+		val16 = (core_index << BCMA_CORE_PCI_SPROM_PI_SHIFT) |
+			(val16 & ~BCMA_CORE_PCI_SPROM_PI_MASK);
+		pcicore_write16(pc, regoff, val16);
+	}
+}
+
+/* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */
+/* Needs to happen when coming out of 'standby'/'hibernate' */
+static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc)
+{
+	u16 val16;
+	uint regoff;
+
+	regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_MISC_CONFIG);
+
+	val16 = pcicore_read16(pc, regoff);
+
+	if (!(val16 & BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST)) {
+		val16 |= BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST;
+		pcicore_write16(pc, regoff, val16);
+	}
 }
 
 /**************************************************
  * Init.
  **************************************************/
 
-static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc)
+static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc)
 {
+	bcma_core_pci_fixcfg(pc);
 	bcma_pcicore_serdes_workaround(pc);
+	bcma_core_pci_config_fixup(pc);
 }
 
-static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
-{
-	struct bcma_bus *bus = pc->core->bus;
-	u16 chipid_top;
-
-	chipid_top = (bus->chipinfo.id & 0xFF00);
-	if (chipid_top != 0x4700 &&
-	    chipid_top != 0x5300)
-		return false;
-
-#ifdef CONFIG_SSB_DRIVER_PCICORE
-	if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI)
-		return false;
-#endif /* CONFIG_SSB_DRIVER_PCICORE */
-
-#if 0
-	/* TODO: on BCMA we use address from EROM instead of magic formula */
-	u32 tmp;
-	return !mips_busprobe32(tmp, (bus->mmio +
-		(pc->core->core_index * BCMA_CORE_SIZE)));
-#endif
-
-	return true;
-}
-
-void bcma_core_pci_init(struct bcma_drv_pci *pc)
+void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc)
 {
 	if (pc->setup_done)
 		return;
 
-	if (bcma_core_pci_is_in_hostmode(pc)) {
 #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
+	pc->hostmode = bcma_core_pci_is_in_hostmode(pc);
+	if (pc->hostmode)
 		bcma_core_pci_hostmode_init(pc);
-#else
-		pr_err("Driver compiled without support for hostmode PCI\n");
 #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
-	} else {
-		bcma_core_pci_clientmode_init(pc);
-	}
 
-	pc->setup_done = true;
+	if (!pc->hostmode)
+		bcma_core_pci_clientmode_init(pc);
 }
 
 int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
 			  bool enable)
 {
-	struct pci_dev *pdev = pc->core->bus->host_pci;
+	struct pci_dev *pdev;
 	u32 coremask, tmp;
 	int err = 0;
 
-	if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
+	if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
 		/* This bcma device is not on a PCI host-bus. So the IRQs are
 		 * not routed through the PCI core.
 		 * So we must not enable routing through the PCI core. */
 		goto out;
 	}
 
+	pdev = pc->core->bus->host_pci;
+
 	err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
 	if (err)
 		goto out;
@@ -236,3 +261,17 @@ out:
 	return err;
 }
 EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
+
+void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
+{
+	u32 w;
+
+	w = bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
+	if (extend)
+		w |= BCMA_CORE_PCI_ASPMTIMER_EXTEND;
+	else
+		w &= ~BCMA_CORE_PCI_ASPMTIMER_EXTEND;
+	bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w);
+	bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
+}
+EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer);
--- a/drivers/bcma/driver_pci_host.c
+++ b/drivers/bcma/driver_pci_host.c
@@ -2,13 +2,600 @@
  * Broadcom specific AMBA
  * PCI Core in hostmode
  *
+ * Copyright 2005 - 2011, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 #include "bcma_private.h"
+#include <linux/pci.h>
+#include <linux/export.h>
 #include <linux/bcma/bcma.h>
+#include <asm/paccess.h>
+
+/* Probe a 32bit value on the bus and catch bus exceptions.
+ * Returns nonzero on a bus exception.
+ * This is MIPS specific */
+#define mips_busprobe32(val, addr)	get_dbe((val), ((u32 *)(addr)))
+
+/* Assume one-hot slot wiring */
+#define BCMA_PCI_SLOT_MAX	16
+#define	PCI_CONFIG_SPACE_SIZE	256
+
+bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
+{
+	struct bcma_bus *bus = pc->core->bus;
+	u16 chipid_top;
+	u32 tmp;
+
+	chipid_top = (bus->chipinfo.id & 0xFF00);
+	if (chipid_top != 0x4700 &&
+	    chipid_top != 0x5300)
+		return false;
+
+	bcma_core_enable(pc->core, 0);
+
+	return !mips_busprobe32(tmp, pc->core->io_addr);
+}
+
+static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address)
+{
+	pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address);
+	pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR);
+	return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA);
+}
+
+static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address,
+				   u32 data)
+{
+	pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address);
+	pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR);
+	pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data);
+}
+
+static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev,
+			     unsigned int func, unsigned int off)
+{
+	u32 addr = 0;
+
+	/* Issue config commands only when the data link is up (atleast
+	 * one external pcie device is present).
+	 */
+	if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG)
+			  & BCMA_CORE_PCI_DLLP_LSREG_LINKUP))
+		goto out;
+
+	/* Type 0 transaction */
+	/* Slide the PCI window to the appropriate slot */
+	pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0);
+	/* Calculate the address */
+	addr = pc->host_controller->host_cfg_addr;
+	addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT);
+	addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT);
+	addr |= (off & ~3);
+
+out:
+	return addr;
+}
 
-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
+static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev,
+				  unsigned int func, unsigned int off,
+				  void *buf, int len)
 {
-	pr_err("No support for PCI core in hostmode yet\n");
+	int err = -EINVAL;
+	u32 addr, val;
+	void __iomem *mmio = 0;
+
+	WARN_ON(!pc->hostmode);
+	if (unlikely(len != 1 && len != 2 && len != 4))
+		goto out;
+	if (dev == 0) {
+		/* we support only two functions on device 0 */
+		if (func > 1)
+			return -EINVAL;
+
+		/* accesses to config registers with offsets >= 256
+		 * requires indirect access.
+		 */
+		if (off >= PCI_CONFIG_SPACE_SIZE) {
+			addr = (func << 12);
+			addr |= (off & 0x0FFF);
+			val = bcma_pcie_read_config(pc, addr);
+		} else {
+			addr = BCMA_CORE_PCI_PCICFG0;
+			addr |= (func << 8);
+			addr |= (off & 0xfc);
+			val = pcicore_read32(pc, addr);
+		}
+	} else {
+		addr = bcma_get_cfgspace_addr(pc, dev, func, off);
+		if (unlikely(!addr))
+			goto out;
+		err = -ENOMEM;
+		mmio = ioremap_nocache(addr, sizeof(val));
+		if (!mmio)
+			goto out;
+
+		if (mips_busprobe32(val, mmio)) {
+			val = 0xffffffff;
+			goto unmap;
+		}
+
+		val = readl(mmio);
+	}
+	val >>= (8 * (off & 3));
+
+	switch (len) {
+	case 1:
+		*((u8 *)buf) = (u8)val;
+		break;
+	case 2:
+		*((u16 *)buf) = (u16)val;
+		break;
+	case 4:
+		*((u32 *)buf) = (u32)val;
+		break;
+	}
+	err = 0;
+unmap:
+	if (mmio)
+		iounmap(mmio);
+out:
+	return err;
+}
+
+static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev,
+				   unsigned int func, unsigned int off,
+				   const void *buf, int len)
+{
+	int err = -EINVAL;
+	u32 addr = 0, val = 0;
+	void __iomem *mmio = 0;
+	u16 chipid = pc->core->bus->chipinfo.id;
+
+	WARN_ON(!pc->hostmode);
+	if (unlikely(len != 1 && len != 2 && len != 4))
+		goto out;
+	if (dev == 0) {
+		/* accesses to config registers with offsets >= 256
+		 * requires indirect access.
+		 */
+		if (off < PCI_CONFIG_SPACE_SIZE) {
+			addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0;
+			addr |= (func << 8);
+			addr |= (off & 0xfc);
+			mmio = ioremap_nocache(addr, sizeof(val));
+			if (!mmio)
+				goto out;
+		}
+	} else {
+		addr = bcma_get_cfgspace_addr(pc, dev, func, off);
+		if (unlikely(!addr))
+			goto out;
+		err = -ENOMEM;
+		mmio = ioremap_nocache(addr, sizeof(val));
+		if (!mmio)
+			goto out;
+
+		if (mips_busprobe32(val, mmio)) {
+			val = 0xffffffff;
+			goto unmap;
+		}
+	}
+
+	switch (len) {
+	case 1:
+		val = readl(mmio);
+		val &= ~(0xFF << (8 * (off & 3)));
+		val |= *((const u8 *)buf) << (8 * (off & 3));
+		break;
+	case 2:
+		val = readl(mmio);
+		val &= ~(0xFFFF << (8 * (off & 3)));
+		val |= *((const u16 *)buf) << (8 * (off & 3));
+		break;
+	case 4:
+		val = *((const u32 *)buf);
+		break;
+	}
+	if (dev == 0 && !addr) {
+		/* accesses to config registers with offsets >= 256
+		 * requires indirect access.
+		 */
+		addr = (func << 12);
+		addr |= (off & 0x0FFF);
+		bcma_pcie_write_config(pc, addr, val);
+	} else {
+		writel(val, mmio);
+
+		if (chipid == BCMA_CHIP_ID_BCM4716 ||
+		    chipid == BCMA_CHIP_ID_BCM4748)
+			readl(mmio);
+	}
+
+	err = 0;
+unmap:
+	if (mmio)
+		iounmap(mmio);
+out:
+	return err;
+}
+
+static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus,
+					      unsigned int devfn,
+					      int reg, int size, u32 *val)
+{
+	unsigned long flags;
+	int err;
+	struct bcma_drv_pci *pc;
+	struct bcma_drv_pci_host *pc_host;
+
+	pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops);
+	pc = pc_host->pdev;
+
+	spin_lock_irqsave(&pc_host->cfgspace_lock, flags);
+	err = bcma_extpci_read_config(pc, PCI_SLOT(devfn),
+				     PCI_FUNC(devfn), reg, val, size);
+	spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags);
+
+	return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus,
+					       unsigned int devfn,
+					       int reg, int size, u32 val)
+{
+	unsigned long flags;
+	int err;
+	struct bcma_drv_pci *pc;
+	struct bcma_drv_pci_host *pc_host;
+
+	pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops);
+	pc = pc_host->pdev;
+
+	spin_lock_irqsave(&pc_host->cfgspace_lock, flags);
+	err = bcma_extpci_write_config(pc, PCI_SLOT(devfn),
+				      PCI_FUNC(devfn), reg, &val, size);
+	spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags);
+
+	return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+/* return cap_offset if requested capability exists in the PCI config space */
+static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc,
+					     unsigned int dev,
+					     unsigned int func, u8 req_cap_id,
+					     unsigned char *buf, u32 *buflen)
+{
+	u8 cap_id;
+	u8 cap_ptr = 0;
+	u32 bufsize;
+	u8 byte_val;
+
+	/* check for Header type 0 */
+	bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val,
+				sizeof(u8));
+	if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL)
+		return cap_ptr;
+
+	/* check if the capability pointer field exists */
+	bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val,
+				sizeof(u8));
+	if (!(byte_val & PCI_STATUS_CAP_LIST))
+		return cap_ptr;
+
+	/* check if the capability pointer is 0x00 */
+	bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr,
+				sizeof(u8));
+	if (cap_ptr == 0x00)
+		return cap_ptr;
+
+	/* loop thr'u the capability list and see if the requested capabilty
+	 * exists */
+	bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8));
+	while (cap_id != req_cap_id) {
+		bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr,
+					sizeof(u8));
+		if (cap_ptr == 0x00)
+			return cap_ptr;
+		bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id,
+					sizeof(u8));
+	}
+
+	/* found the caller requested capability */
+	if ((buf != NULL) && (buflen != NULL)) {
+		u8 cap_data;
+
+		bufsize = *buflen;
+		if (!bufsize)
+			return cap_ptr;
+
+		*buflen = 0;
+
+		/* copy the cpability data excluding cap ID and next ptr */
+		cap_data = cap_ptr + 2;
+		if ((bufsize + cap_data)  > PCI_CONFIG_SPACE_SIZE)
+			bufsize = PCI_CONFIG_SPACE_SIZE - cap_data;
+		*buflen = bufsize;
+		while (bufsize--) {
+			bcma_extpci_read_config(pc, dev, func, cap_data, buf,
+						sizeof(u8));
+			cap_data++;
+			buf++;
+		}
+	}
+
+	return cap_ptr;
+}
+
+/* If the root port is capable of returning Config Request
+ * Retry Status (CRS) Completion Status to software then
+ * enable the feature.
+ */
+static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc)
+{
+	struct bcma_bus *bus = pc->core->bus;
+	u8 cap_ptr, root_ctrl, root_cap, dev;
+	u16 val16;
+	int i;
+
+	cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL,
+					   NULL);
+	root_cap = cap_ptr + PCI_EXP_RTCAP;
+	bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16));
+	if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) {
+		/* Enable CRS software visibility */
+		root_ctrl = cap_ptr + PCI_EXP_RTCTL;
+		val16 = PCI_EXP_RTCTL_CRSSVE;
+		bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16,
+					sizeof(u16));
+
+		/* Initiate a configuration request to read the vendor id
+		 * field of the device function's config space header after
+		 * 100 ms wait time from the end of Reset. If the device is
+		 * not done with its internal initialization, it must at
+		 * least return a completion TLP, with a completion status
+		 * of "Configuration Request Retry Status (CRS)". The root
+		 * complex must complete the request to the host by returning
+		 * a read-data value of 0001h for the Vendor ID field and
+		 * all 1s for any additional bytes included in the request.
+		 * Poll using the config reads for max wait time of 1 sec or
+		 * until we receive the successful completion status. Repeat
+		 * the procedure for all the devices.
+		 */
+		for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) {
+			for (i = 0; i < 100000; i++) {
+				bcma_extpci_read_config(pc, dev, 0,
+							PCI_VENDOR_ID, &val16,
+							sizeof(val16));
+				if (val16 != 0x1)
+					break;
+				udelay(10);
+			}
+			if (val16 == 0x1)
+				bcma_err(bus, "PCI: Broken device in slot %d\n",
+					 dev);
+		}
+	}
+}
+
+void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
+{
+	struct bcma_bus *bus = pc->core->bus;
+	struct bcma_drv_pci_host *pc_host;
+	u32 tmp;
+	u32 pci_membase_1G;
+	unsigned long io_map_base;
+
+	bcma_info(bus, "PCIEcore in host mode found\n");
+
+	if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
+		bcma_info(bus, "This PCIE core is disabled and not working\n");
+		return;
+	}
+
+	pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL);
+	if (!pc_host)  {
+		bcma_err(bus, "can not allocate memory");
+		return;
+	}
+
+	pc->host_controller = pc_host;
+	pc_host->pci_controller.io_resource = &pc_host->io_resource;
+	pc_host->pci_controller.mem_resource = &pc_host->mem_resource;
+	pc_host->pci_controller.pci_ops = &pc_host->pci_ops;
+	pc_host->pdev = pc;
+
+	pci_membase_1G = BCMA_SOC_PCI_DMA;
+	pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG;
+
+	pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config;
+	pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config;
+
+	pc_host->mem_resource.name = "BCMA PCIcore external memory",
+	pc_host->mem_resource.start = BCMA_SOC_PCI_DMA;
+	pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1;
+	pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
+
+	pc_host->io_resource.name = "BCMA PCIcore external I/O",
+	pc_host->io_resource.start = 0x100;
+	pc_host->io_resource.end = 0x7FF;
+	pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;
+
+	/* Reset RC */
+	usleep_range(3000, 5000);
+	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
+	usleep_range(1000, 2000);
+	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
+			BCMA_CORE_PCI_CTL_RST_OE);
+
+	/* 64 MB I/O access window. On 4716, use
+	 * sbtopcie0 to access the device registers. We
+	 * can't use address match 2 (1 GB window) region
+	 * as mips can't generate 64-bit address on the
+	 * backplane.
+	 */
+	if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4716 ||
+	    bus->chipinfo.id == BCMA_CHIP_ID_BCM4748) {
+		pc_host->mem_resource.start = BCMA_SOC_PCI_MEM;
+		pc_host->mem_resource.end = BCMA_SOC_PCI_MEM +
+					    BCMA_SOC_PCI_MEM_SZ - 1;
+		pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
+				BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM);
+	} else if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
+		tmp = BCMA_CORE_PCI_SBTOPCI_MEM;
+		tmp |= BCMA_CORE_PCI_SBTOPCI_PREF;
+		tmp |= BCMA_CORE_PCI_SBTOPCI_BURST;
+		if (pc->core->core_unit == 0) {
+			pc_host->mem_resource.start = BCMA_SOC_PCI_MEM;
+			pc_host->mem_resource.end = BCMA_SOC_PCI_MEM +
+						    BCMA_SOC_PCI_MEM_SZ - 1;
+			pc_host->io_resource.start = 0x100;
+			pc_host->io_resource.end = 0x47F;
+			pci_membase_1G = BCMA_SOC_PCIE_DMA_H32;
+			pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
+					tmp | BCMA_SOC_PCI_MEM);
+		} else if (pc->core->core_unit == 1) {
+			pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM;
+			pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM +
+						    BCMA_SOC_PCI_MEM_SZ - 1;
+			pc_host->io_resource.start = 0x480;
+			pc_host->io_resource.end = 0x7FF;
+			pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32;
+			pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG;
+			pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
+					tmp | BCMA_SOC_PCI1_MEM);
+		}
+	} else
+		pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
+				BCMA_CORE_PCI_SBTOPCI_IO);
+
+	/* 64 MB configuration access window */
+	pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0);
+
+	/* 1 GB memory access window */
+	pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2,
+			BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G);
+
+
+	/* As per PCI Express Base Spec 1.1 we need to wait for
+	 * at least 100 ms from the end of a reset (cold/warm/hot)
+	 * before issuing configuration requests to PCI Express
+	 * devices.
+	 */
+	msleep(100);
+
+	bcma_core_pci_enable_crs(pc);
+
+	/* Enable PCI bridge BAR0 memory & master access */
+	tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp));
+
+	/* Enable PCI interrupts */
+	pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA);
+
+	/* Ok, ready to run, register it to the system.
+	 * The following needs change, if we want to port hostmode
+	 * to non-MIPS platform. */
+	io_map_base = (unsigned long)ioremap_nocache(pc_host->mem_resource.start,
+						     resource_size(&pc_host->mem_resource));
+	pc_host->pci_controller.io_map_base = io_map_base;
+	set_io_port_base(pc_host->pci_controller.io_map_base);
+	/* Give some time to the PCI controller to configure itself with the new
+	 * values. Not waiting at this point causes crashes of the machine. */
+	usleep_range(10000, 15000);
+	register_pci_controller(&pc_host->pci_controller);
+	return;
+}
+
+/* Early PCI fixup for a device on the PCI-core bridge. */
+static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev)
+{
+	if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
+		/* This is not a device on the PCI-core bridge. */
+		return;
+	}
+	if (PCI_SLOT(dev->devfn) != 0)
+		return;
+
+	pr_info("PCI: Fixing up bridge %s\n", pci_name(dev));
+
+	/* Enable PCI bridge bus mastering and memory space */
+	pci_set_master(dev);
+	if (pcibios_enable_device(dev, ~0) < 0) {
+		pr_err("PCI: BCMA bridge enable failed\n");
+		return;
+	}
+
+	/* Enable PCI bridge BAR1 prefetch and burst */
+	pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge);
+
+/* Early PCI fixup for all PCI-cores to set the correct memory address. */
+static void bcma_core_pci_fixup_addresses(struct pci_dev *dev)
+{
+	struct resource *res;
+	int pos, err;
+
+	if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
+		/* This is not a device on the PCI-core bridge. */
+		return;
+	}
+	if (PCI_SLOT(dev->devfn) == 0)
+		return;
+
+	pr_info("PCI: Fixing up addresses %s\n", pci_name(dev));
+
+	for (pos = 0; pos < 6; pos++) {
+		res = &dev->resource[pos];
+		if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) {
+			err = pci_assign_resource(dev, pos);
+			if (err)
+				pr_err("PCI: Problem fixing up the addresses on %s\n",
+				       pci_name(dev));
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses);
+
+/* This function is called when doing a pci_enable_device().
+ * We must first check if the device is a device on the PCI-core bridge. */
+int bcma_core_pci_plat_dev_init(struct pci_dev *dev)
+{
+	struct bcma_drv_pci_host *pc_host;
+
+	if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
+		/* This is not a device on the PCI-core bridge. */
+		return -ENODEV;
+	}
+	pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+			       pci_ops);
+
+	pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+
+	/* Fix up interrupt lines */
+	dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2;
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+
+	return 0;
+}
+EXPORT_SYMBOL(bcma_core_pci_plat_dev_init);
+
+/* PCI device IRQ mapping. */
+int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev)
+{
+	struct bcma_drv_pci_host *pc_host;
+
+	if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
+		/* This is not a device on the PCI-core bridge. */
+		return -ENODEV;
+	}
+
+	pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+			       pci_ops);
+	return bcma_core_mips_irq(pc_host->pdev->core) + 2;
 }
+EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -18,7 +18,7 @@ static void bcma_host_pci_switch_core(st
 	pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2,
 			       core->wrap);
 	core->bus->mapped_core = core;
-	pr_debug("Switched to core: 0x%X\n", core->id.id);
+	bcma_debug(core->bus, "Switched to core: 0x%X\n", core->id.id);
 }
 
 /* Provides access to the requested core. Returns base offset that has to be
@@ -77,8 +77,8 @@ static void bcma_host_pci_write32(struct
 }
 
 #ifdef CONFIG_BCMA_BLOCKIO
-void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
-			      size_t count, u16 offset, u8 reg_width)
+static void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
+				     size_t count, u16 offset, u8 reg_width)
 {
 	void __iomem *addr = core->bus->mmio + offset;
 	if (core->bus->mapped_core != core)
@@ -100,8 +100,9 @@ void bcma_host_pci_block_read(struct bcm
 	}
 }
 
-void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer,
-			       size_t count, u16 offset, u8 reg_width)
+static void bcma_host_pci_block_write(struct bcma_device *core,
+				      const void *buffer, size_t count,
+				      u16 offset, u8 reg_width)
 {
 	void __iomem *addr = core->bus->mmio + offset;
 	if (core->bus->mapped_core != core)
@@ -139,7 +140,7 @@ static void bcma_host_pci_awrite32(struc
 	iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
 }
 
-const struct bcma_host_ops bcma_host_pci_ops = {
+static const struct bcma_host_ops bcma_host_pci_ops = {
 	.read8		= bcma_host_pci_read8,
 	.read16		= bcma_host_pci_read16,
 	.read32		= bcma_host_pci_read32,
@@ -154,8 +155,8 @@ const struct bcma_host_ops bcma_host_pci
 	.awrite32	= bcma_host_pci_awrite32,
 };
 
-static int bcma_host_pci_probe(struct pci_dev *dev,
-			     const struct pci_device_id *id)
+static int __devinit bcma_host_pci_probe(struct pci_dev *dev,
+					 const struct pci_device_id *id)
 {
 	struct bcma_bus *bus;
 	int err = -ENOMEM;
@@ -188,7 +189,7 @@ static int bcma_host_pci_probe(struct pc
 
 	/* SSB needed additional powering up, do we have any AMBA PCI cards? */
 	if (!pci_is_pcie(dev))
-		pr_err("PCI card detected, report problems.\n");
+		bcma_err(bus, "PCI card detected, report problems.\n");
 
 	/* Map MMIO */
 	err = -ENOMEM;
@@ -201,6 +202,9 @@ static int bcma_host_pci_probe(struct pc
 	bus->hosttype = BCMA_HOSTTYPE_PCI;
 	bus->ops = &bcma_host_pci_ops;
 
+	bus->boardinfo.vendor = bus->host_pci->subsystem_vendor;
+	bus->boardinfo.type = bus->host_pci->subsystem_device;
+
 	/* Register */
 	err = bcma_bus_register(bus);
 	if (err)
@@ -222,7 +226,7 @@ err_kfree_bus:
 	return err;
 }
 
-static void bcma_host_pci_remove(struct pci_dev *dev)
+static void __devexit bcma_host_pci_remove(struct pci_dev *dev)
 {
 	struct bcma_bus *bus = pci_get_drvdata(dev);
 
@@ -234,7 +238,7 @@ static void bcma_host_pci_remove(struct
 	pci_set_drvdata(dev, NULL);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int bcma_host_pci_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
@@ -257,17 +261,20 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
 			 bcma_host_pci_resume);
 #define BCMA_PM_OPS	(&bcma_pm_ops)
 
-#else /* CONFIG_PM */
+#else /* CONFIG_PM_SLEEP */
 
 #define BCMA_PM_OPS     NULL
 
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
 
 static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
 	{ 0, },
 };
@@ -277,7 +284,7 @@ static struct pci_driver bcma_pci_bridge
 	.name = "bcma-pci-bridge",
 	.id_table = bcma_pci_bridge_tbl,
 	.probe = bcma_host_pci_probe,
-	.remove = bcma_host_pci_remove,
+	.remove = __devexit_p(bcma_host_pci_remove),
 	.driver.pm = BCMA_PM_OPS,
 };
 
--- a/drivers/bcma/host_soc.c
+++ b/drivers/bcma/host_soc.c
@@ -143,7 +143,7 @@ static void bcma_host_soc_awrite32(struc
 	writel(value, core->io_wrap + offset);
 }
 
-const struct bcma_host_ops bcma_host_soc_ops = {
+static const struct bcma_host_ops bcma_host_soc_ops = {
 	.read8		= bcma_host_soc_read8,
 	.read16		= bcma_host_soc_read16,
 	.read32		= bcma_host_soc_read32,
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -7,12 +7,19 @@
 
 #include "bcma_private.h"
 #include <linux/module.h>
+#include <linux/platform_device.h>
 #include <linux/bcma/bcma.h>
 #include <linux/slab.h>
 
 MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
 MODULE_LICENSE("GPL");
 
+/* contains the number the next bus should get. */
+static unsigned int bcma_bus_next_num = 0;
+
+/* bcma_buses_mutex locks the bcma_bus_next_num */
+static DEFINE_MUTEX(bcma_buses_mutex);
+
 static int bcma_bus_match(struct device *dev, struct device_driver *drv);
 static int bcma_device_probe(struct device *dev);
 static int bcma_device_remove(struct device *dev);
@@ -55,7 +62,14 @@ static struct bus_type bcma_bus_type = {
 	.dev_attrs	= bcma_device_attrs,
 };
 
-static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
+static u16 bcma_cc_core_id(struct bcma_bus *bus)
+{
+	if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
+		return BCMA_CORE_4706_CHIPCOMMON;
+	return BCMA_CORE_CHIPCOMMON;
+}
+
+struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
 {
 	struct bcma_device *core;
 
@@ -65,6 +79,19 @@ static struct bcma_device *bcma_find_cor
 	}
 	return NULL;
 }
+EXPORT_SYMBOL_GPL(bcma_find_core);
+
+struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
+					u8 unit)
+{
+	struct bcma_device *core;
+
+	list_for_each_entry(core, &bus->cores, list) {
+		if (core->id.id == coreid && core->core_unit == unit)
+			return core;
+	}
+	return NULL;
+}
 
 static void bcma_release_core_dev(struct device *dev)
 {
@@ -84,16 +111,18 @@ static int bcma_register_cores(struct bc
 	list_for_each_entry(core, &bus->cores, list) {
 		/* We support that cores ourself */
 		switch (core->id.id) {
+		case BCMA_CORE_4706_CHIPCOMMON:
 		case BCMA_CORE_CHIPCOMMON:
 		case BCMA_CORE_PCI:
 		case BCMA_CORE_PCIE:
 		case BCMA_CORE_MIPS_74K:
+		case BCMA_CORE_4706_MAC_GBIT_COMMON:
 			continue;
 		}
 
 		core->dev.release = bcma_release_core_dev;
 		core->dev.bus = &bcma_bus_type;
-		dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id);
+		dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id);
 
 		switch (bus->hosttype) {
 		case BCMA_HOSTTYPE_PCI:
@@ -111,41 +140,90 @@ static int bcma_register_cores(struct bc
 
 		err = device_register(&core->dev);
 		if (err) {
-			pr_err("Could not register dev for core 0x%03X\n",
-			       core->id.id);
+			bcma_err(bus,
+				 "Could not register dev for core 0x%03X\n",
+				 core->id.id);
 			continue;
 		}
 		core->dev_registered = true;
 		dev_id++;
 	}
 
+#ifdef CONFIG_BCMA_SFLASH
+	if (bus->drv_cc.sflash.present) {
+		err = platform_device_register(&bcma_sflash_dev);
+		if (err)
+			bcma_err(bus, "Error registering serial flash\n");
+	}
+#endif
+
+#ifdef CONFIG_BCMA_NFLASH
+	if (bus->drv_cc.nflash.present) {
+		err = platform_device_register(&bcma_nflash_dev);
+		if (err)
+			bcma_err(bus, "Error registering NAND flash\n");
+	}
+#endif
+	err = bcma_gpio_init(&bus->drv_cc);
+	if (err == -ENOTSUPP)
+		bcma_debug(bus, "GPIO driver not activated\n");
+	else if (err)
+		bcma_err(bus, "Error registering GPIO driver: %i\n", err);
+
+	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
+		err = bcma_chipco_watchdog_register(&bus->drv_cc);
+		if (err)
+			bcma_err(bus, "Error registering watchdog driver\n");
+	}
+
 	return 0;
 }
 
 static void bcma_unregister_cores(struct bcma_bus *bus)
 {
-	struct bcma_device *core;
+	struct bcma_device *core, *tmp;
 
-	list_for_each_entry(core, &bus->cores, list) {
+	list_for_each_entry_safe(core, tmp, &bus->cores, list) {
+		list_del(&core->list);
 		if (core->dev_registered)
 			device_unregister(&core->dev);
 	}
+	if (bus->hosttype == BCMA_HOSTTYPE_SOC)
+		platform_device_unregister(bus->drv_cc.watchdog);
 }
 
-int bcma_bus_register(struct bcma_bus *bus)
+int __devinit bcma_bus_register(struct bcma_bus *bus)
 {
 	int err;
 	struct bcma_device *core;
 
+	mutex_lock(&bcma_buses_mutex);
+	bus->num = bcma_bus_next_num++;
+	mutex_unlock(&bcma_buses_mutex);
+
 	/* Scan for devices (cores) */
 	err = bcma_bus_scan(bus);
 	if (err) {
-		pr_err("Failed to scan: %d\n", err);
+		bcma_err(bus, "Failed to scan: %d\n", err);
 		return -1;
 	}
 
+	/* Early init CC core */
+	core = bcma_find_core(bus, bcma_cc_core_id(bus));
+	if (core) {
+		bus->drv_cc.core = core;
+		bcma_core_chipcommon_early_init(&bus->drv_cc);
+	}
+
+	/* Try to get SPROM */
+	err = bcma_sprom_get(bus);
+	if (err == -ENOENT) {
+		bcma_err(bus, "No SPROM available\n");
+	} else if (err)
+		bcma_err(bus, "Failed to get SPROM: %d\n", err);
+
 	/* Init CC core */
-	core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+	core = bcma_find_core(bus, bcma_cc_core_id(bus));
 	if (core) {
 		bus->drv_cc.core = core;
 		bcma_core_chipcommon_init(&bus->drv_cc);
@@ -159,30 +237,47 @@ int bcma_bus_register(struct bcma_bus *b
 	}
 
 	/* Init PCIE core */
-	core = bcma_find_core(bus, BCMA_CORE_PCIE);
+	core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 0);
 	if (core) {
-		bus->drv_pci.core = core;
-		bcma_core_pci_init(&bus->drv_pci);
+		bus->drv_pci[0].core = core;
+		bcma_core_pci_init(&bus->drv_pci[0]);
 	}
 
-	/* Try to get SPROM */
-	err = bcma_sprom_get(bus);
-	if (err == -ENOENT) {
-		pr_err("No SPROM available\n");
-	} else if (err)
-		pr_err("Failed to get SPROM: %d\n", err);
+	/* Init PCIE core */
+	core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 1);
+	if (core) {
+		bus->drv_pci[1].core = core;
+		bcma_core_pci_init(&bus->drv_pci[1]);
+	}
+
+	/* Init GBIT MAC COMMON core */
+	core = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
+	if (core) {
+		bus->drv_gmac_cmn.core = core;
+		bcma_core_gmac_cmn_init(&bus->drv_gmac_cmn);
+	}
 
 	/* Register found cores */
 	bcma_register_cores(bus);
 
-	pr_info("Bus registered\n");
+	bcma_info(bus, "Bus registered\n");
 
 	return 0;
 }
 
 void bcma_bus_unregister(struct bcma_bus *bus)
 {
+	struct bcma_device *cores[3];
+
+	cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+	cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
+	cores[2] = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
+
 	bcma_unregister_cores(bus);
+
+	kfree(cores[2]);
+	kfree(cores[1]);
+	kfree(cores[0]);
 }
 
 int __init bcma_bus_early_register(struct bcma_bus *bus,
@@ -196,14 +291,14 @@ int __init bcma_bus_early_register(struc
 	bcma_init_bus(bus);
 
 	match.manuf = BCMA_MANUF_BCM;
-	match.id = BCMA_CORE_CHIPCOMMON;
+	match.id = bcma_cc_core_id(bus);
 	match.class = BCMA_CL_SIM;
 	match.rev = BCMA_ANY_REV;
 
 	/* Scan for chip common core */
 	err = bcma_bus_scan_early(bus, &match, core_cc);
 	if (err) {
-		pr_err("Failed to scan for common core: %d\n", err);
+		bcma_err(bus, "Failed to scan for common core: %d\n", err);
 		return -1;
 	}
 
@@ -215,25 +310,25 @@ int __init bcma_bus_early_register(struc
 	/* Scan for mips core */
 	err = bcma_bus_scan_early(bus, &match, core_mips);
 	if (err) {
-		pr_err("Failed to scan for mips core: %d\n", err);
+		bcma_err(bus, "Failed to scan for mips core: %d\n", err);
 		return -1;
 	}
 
-	/* Init CC core */
-	core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+	/* Early init CC core */
+	core = bcma_find_core(bus, bcma_cc_core_id(bus));
 	if (core) {
 		bus->drv_cc.core = core;
-		bcma_core_chipcommon_init(&bus->drv_cc);
+		bcma_core_chipcommon_early_init(&bus->drv_cc);
 	}
 
-	/* Init MIPS core */
+	/* Early init MIPS core */
 	core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
 	if (core) {
 		bus->drv_mips.core = core;
-		bcma_core_mips_init(&bus->drv_mips);
+		bcma_core_mips_early_init(&bus->drv_mips);
 	}
 
-	pr_info("Early bus registered\n");
+	bcma_info(bus, "Early bus registered\n");
 
 	return 0;
 }
@@ -259,8 +354,7 @@ int bcma_bus_resume(struct bcma_bus *bus
 	struct bcma_device *core;
 
 	/* Init CC core */
-	core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
-	if (core) {
+	if (bus->drv_cc.core) {
 		bus->drv_cc.setup_done = false;
 		bcma_core_chipcommon_init(&bus->drv_cc);
 	}
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -19,15 +19,27 @@ struct bcma_device_id_name {
 	u16 id;
 	const char *name;
 };
-struct bcma_device_id_name bcma_device_names[] = {
+
+static const struct bcma_device_id_name bcma_arm_device_names[] = {
+	{ BCMA_CORE_4706_MAC_GBIT_COMMON, "BCM4706 GBit MAC Common" },
+	{ BCMA_CORE_ARM_1176, "ARM 1176" },
+	{ BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" },
+	{ BCMA_CORE_ARM_CM3, "ARM CM3" },
+};
+
+static const struct bcma_device_id_name bcma_bcm_device_names[] = {
 	{ BCMA_CORE_OOB_ROUTER, "OOB Router" },
+	{ BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" },
+	{ BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" },
+	{ BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" },
+	{ BCMA_CORE_AMEMC, "AMEMC (DDR)" },
+	{ BCMA_CORE_ALTA, "ALTA (I2S)" },
 	{ BCMA_CORE_INVALID, "Invalid" },
 	{ BCMA_CORE_CHIPCOMMON, "ChipCommon" },
 	{ BCMA_CORE_ILINE20, "ILine 20" },
 	{ BCMA_CORE_SRAM, "SRAM" },
 	{ BCMA_CORE_SDRAM, "SDRAM" },
 	{ BCMA_CORE_PCI, "PCI" },
-	{ BCMA_CORE_MIPS, "MIPS" },
 	{ BCMA_CORE_ETHERNET, "Fast Ethernet" },
 	{ BCMA_CORE_V90, "V90" },
 	{ BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" },
@@ -44,7 +56,6 @@ struct bcma_device_id_name bcma_device_n
 	{ BCMA_CORE_PHY_A, "PHY A" },
 	{ BCMA_CORE_PHY_B, "PHY B" },
 	{ BCMA_CORE_PHY_G, "PHY G" },
-	{ BCMA_CORE_MIPS_3302, "MIPS 3302" },
 	{ BCMA_CORE_USB11_HOST, "USB 1.1 Host" },
 	{ BCMA_CORE_USB11_DEV, "USB 1.1 Device" },
 	{ BCMA_CORE_USB20_HOST, "USB 2.0 Host" },
@@ -58,15 +69,11 @@ struct bcma_device_id_name bcma_device_n
 	{ BCMA_CORE_PHY_N, "PHY N" },
 	{ BCMA_CORE_SRAM_CTL, "SRAM Controller" },
 	{ BCMA_CORE_MINI_MACPHY, "Mini MACPHY" },
-	{ BCMA_CORE_ARM_1176, "ARM 1176" },
-	{ BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" },
 	{ BCMA_CORE_PHY_LP, "PHY LP" },
 	{ BCMA_CORE_PMU, "PMU" },
 	{ BCMA_CORE_PHY_SSN, "PHY SSN" },
 	{ BCMA_CORE_SDIO_DEV, "SDIO Device" },
-	{ BCMA_CORE_ARM_CM3, "ARM CM3" },
 	{ BCMA_CORE_PHY_HT, "PHY HT" },
-	{ BCMA_CORE_MIPS_74K, "MIPS 74K" },
 	{ BCMA_CORE_MAC_GBIT, "GBit MAC" },
 	{ BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
 	{ BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
@@ -79,16 +86,41 @@ struct bcma_device_id_name bcma_device_n
 	{ BCMA_CORE_SHIM, "SHIM" },
 	{ BCMA_CORE_DEFAULT, "Default" },
 };
-const char *bcma_device_name(struct bcma_device_id *id)
+
+static const struct bcma_device_id_name bcma_mips_device_names[] = {
+	{ BCMA_CORE_MIPS, "MIPS" },
+	{ BCMA_CORE_MIPS_3302, "MIPS 3302" },
+	{ BCMA_CORE_MIPS_74K, "MIPS 74K" },
+};
+
+static const char *bcma_device_name(const struct bcma_device_id *id)
 {
-	int i;
+	const struct bcma_device_id_name *names;
+	int size, i;
 
-	if (id->manuf == BCMA_MANUF_BCM) {
-		for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) {
-			if (bcma_device_names[i].id == id->id)
-				return bcma_device_names[i].name;
-		}
+	/* search manufacturer specific names */
+	switch (id->manuf) {
+	case BCMA_MANUF_ARM:
+		names = bcma_arm_device_names;
+		size = ARRAY_SIZE(bcma_arm_device_names);
+		break;
+	case BCMA_MANUF_BCM:
+		names = bcma_bcm_device_names;
+		size = ARRAY_SIZE(bcma_bcm_device_names);
+		break;
+	case BCMA_MANUF_MIPS:
+		names = bcma_mips_device_names;
+		size = ARRAY_SIZE(bcma_mips_device_names);
+		break;
+	default:
+		return "UNKNOWN";
 	}
+
+	for (i = 0; i < size; i++) {
+		if (names[i].id == id->id)
+			return names[i].name;
+	}
+
 	return "UNKNOWN";
 }
 
@@ -212,6 +244,17 @@ static struct bcma_device *bcma_find_cor
 	return NULL;
 }
 
+static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid)
+{
+	struct bcma_device *core;
+
+	list_for_each_entry_reverse(core, &bus->cores, list) {
+		if (core->id.id == coreid)
+			return core;
+	}
+	return NULL;
+}
+
 static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
 			      struct bcma_device_id *match, int core_num,
 			      struct bcma_device *core)
@@ -252,11 +295,15 @@ static int bcma_get_next_core(struct bcm
 
 	/* check if component is a core at all */
 	if (wrappers[0] + wrappers[1] == 0) {
-		/* we could save addrl of the router
-		if (cid == BCMA_CORE_OOB_ROUTER)
-		 */
-		bcma_erom_skip_component(bus, eromptr);
-		return -ENXIO;
+		/* Some specific cores don't need wrappers */
+		switch (core->id.id) {
+		case BCMA_CORE_4706_MAC_GBIT_COMMON:
+		/* Not used yet: case BCMA_CORE_OOB_ROUTER: */
+			break;
+		default:
+			bcma_erom_skip_component(bus, eromptr);
+			return -ENXIO;
+		}
 	}
 
 	if (bcma_erom_is_bridge(bus, eromptr)) {
@@ -286,6 +333,23 @@ static int bcma_get_next_core(struct bcm
 			return -EILSEQ;
 	}
 
+	/* First Slave Address Descriptor should be port 0:
+	 * the main register space for the core
+	 */
+	tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0);
+	if (tmp <= 0) {
+		/* Try again to see if it is a bridge */
+		tmp = bcma_erom_get_addr_desc(bus, eromptr,
+					      SCAN_ADDR_TYPE_BRIDGE, 0);
+		if (tmp <= 0) {
+			return -EILSEQ;
+		} else {
+			bcma_info(bus, "Bridge found\n");
+			return -ENXIO;
+		}
+	}
+	core->addr = tmp;
+
 	/* get & parse slave ports */
 	for (i = 0; i < ports[1]; i++) {
 		for (j = 0; ; j++) {
@@ -298,7 +362,7 @@ static int bcma_get_next_core(struct bcm
 				break;
 			} else {
 				if (i == 0 && j == 0)
-					core->addr = tmp;
+					core->addr1 = tmp;
 			}
 		}
 	}
@@ -353,6 +417,7 @@ static int bcma_get_next_core(struct bcm
 void bcma_init_bus(struct bcma_bus *bus)
 {
 	s32 tmp;
+	struct bcma_chipinfo *chipinfo = &(bus->chipinfo);
 
 	if (bus->init_done)
 		return;
@@ -363,9 +428,12 @@ void bcma_init_bus(struct bcma_bus *bus)
 	bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
 
 	tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
-	bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
-	bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
-	bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
+	chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
+	chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
+	chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
+	bcma_info(bus, "Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
+		  chipinfo->id, chipinfo->rev, chipinfo->pkg);
+
 	bus->init_done = true;
 }
 
@@ -392,9 +460,12 @@ int bcma_bus_scan(struct bcma_bus *bus)
 	bcma_scan_switch_core(bus, erombase);
 
 	while (eromptr < eromend) {
+		struct bcma_device *other_core;
 		struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL);
-		if (!core)
-			return -ENOMEM;
+		if (!core) {
+			err = -ENOMEM;
+			goto out;
+		}
 		INIT_LIST_HEAD(&core->list);
 		core->bus = bus;
 
@@ -409,25 +480,28 @@ int bcma_bus_scan(struct bcma_bus *bus)
 			} else if (err == -ESPIPE) {
 				break;
 			}
-			return err;
+			goto out;
 		}
 
 		core->core_index = core_num++;
 		bus->nr_cores++;
+		other_core = bcma_find_core_reverse(bus, core->id.id);
+		core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1;
 
-		pr_info("Core %d found: %s "
-			"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
-			core->core_index, bcma_device_name(&core->id),
-			core->id.manuf, core->id.id, core->id.rev,
-			core->id.class);
+		bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+			  core->core_index, bcma_device_name(&core->id),
+			  core->id.manuf, core->id.id, core->id.rev,
+			  core->id.class);
 
-		list_add(&core->list, &bus->cores);
+		list_add_tail(&core->list, &bus->cores);
 	}
 
+	err = 0;
+out:
 	if (bus->hosttype == BCMA_HOSTTYPE_SOC)
 		iounmap(eromptr);
 
-	return 0;
+	return err;
 }
 
 int __init bcma_bus_scan_early(struct bcma_bus *bus,
@@ -467,21 +541,21 @@ int __init bcma_bus_scan_early(struct bc
 		else if (err == -ESPIPE)
 			break;
 		else if (err < 0)
-			return err;
+			goto out;
 
 		core->core_index = core_num++;
 		bus->nr_cores++;
-		pr_info("Core %d found: %s "
-			"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
-			core->core_index, bcma_device_name(&core->id),
-			core->id.manuf, core->id.id, core->id.rev,
-			core->id.class);
+		bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+			  core->core_index, bcma_device_name(&core->id),
+			  core->id.manuf, core->id.id, core->id.rev,
+			  core->id.class);
 
-		list_add(&core->list, &bus->cores);
+		list_add_tail(&core->list, &bus->cores);
 		err = 0;
 		break;
 	}
 
+out:
 	if (bus->hosttype == BCMA_HOSTTYPE_SOC)
 		iounmap(eromptr);
 
--- a/drivers/bcma/scan.h
+++ b/drivers/bcma/scan.h
@@ -27,7 +27,7 @@
 #define SCAN_CIB_NMW		0x0007C000
 #define SCAN_CIB_NMW_SHIFT	14
 #define SCAN_CIB_NSW		0x00F80000
-#define SCAN_CIB_NSW_SHIFT	17
+#define SCAN_CIB_NSW_SHIFT	19
 #define SCAN_CIB_REV		0xFF000000
 #define SCAN_CIB_REV_SHIFT	24
 
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -2,6 +2,8 @@
  * Broadcom specific AMBA
  * SPROM reading
  *
+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
@@ -14,7 +16,57 @@
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 
-#define SPOFF(offset)	((offset) / sizeof(u16))
+static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out);
+
+/**
+ * bcma_arch_register_fallback_sprom - Registers a method providing a
+ * fallback SPROM if no SPROM is found.
+ *
+ * @sprom_callback: The callback function.
+ *
+ * With this function the architecture implementation may register a
+ * callback handler which fills the SPROM data structure. The fallback is
+ * used for PCI based BCMA devices, where no valid SPROM can be found
+ * in the shadow registers and to provide the SPROM for SoCs where BCMA is
+ * to controll the system bus.
+ *
+ * This function is useful for weird architectures that have a half-assed
+ * BCMA device hardwired to their PCI bus.
+ *
+ * This function is available for architecture code, only. So it is not
+ * exported.
+ */
+int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus,
+				     struct ssb_sprom *out))
+{
+	if (get_fallback_sprom)
+		return -EEXIST;
+	get_fallback_sprom = sprom_callback;
+
+	return 0;
+}
+
+static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus,
+					 struct ssb_sprom *out)
+{
+	int err;
+
+	if (!get_fallback_sprom) {
+		err = -ENOENT;
+		goto fail;
+	}
+
+	err = get_fallback_sprom(bus, out);
+	if (err)
+		goto fail;
+
+	bcma_debug(bus, "Using SPROM revision %d provided by platform.\n",
+		   bus->sprom.revision);
+	return 0;
+fail:
+	bcma_warn(bus, "Using fallback SPROM failed (err %d)\n", err);
+	return err;
+}
 
 /**************************************************
  * R/W ops.
@@ -124,10 +176,37 @@ static int bcma_sprom_valid(const u16 *s
  * SPROM extraction.
  **************************************************/
 
+#define SPOFF(offset)	((offset) / sizeof(u16))
+
+#define SPEX(_field, _offset, _mask, _shift)	\
+	bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift))
+
+#define SPEX32(_field, _offset, _mask, _shift)	\
+	bus->sprom._field = ((((u32)sprom[SPOFF((_offset)+2)] << 16 | \
+				sprom[SPOFF(_offset)]) & (_mask)) >> (_shift))
+
+#define SPEX_ARRAY8(_field, _offset, _mask, _shift)	\
+	do {	\
+		SPEX(_field[0], _offset +  0, _mask, _shift);	\
+		SPEX(_field[1], _offset +  2, _mask, _shift);	\
+		SPEX(_field[2], _offset +  4, _mask, _shift);	\
+		SPEX(_field[3], _offset +  6, _mask, _shift);	\
+		SPEX(_field[4], _offset +  8, _mask, _shift);	\
+		SPEX(_field[5], _offset + 10, _mask, _shift);	\
+		SPEX(_field[6], _offset + 12, _mask, _shift);	\
+		SPEX(_field[7], _offset + 14, _mask, _shift);	\
+	} while (0)
+
 static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
 {
-	u16 v;
+	u16 v, o;
 	int i;
+	u16 pwr_info_offset[] = {
+		SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+		SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
+	};
+	BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
+			ARRAY_SIZE(bus->sprom.core_pwr_info));
 
 	bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
 		SSB_SPROM_REVISION_REV;
@@ -137,107 +216,390 @@ static void bcma_sprom_extract_r8(struct
 		*(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
 	}
 
-	bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)];
+	SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
+
+	SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
+	     SSB_SPROM4_TXPID2G0_SHIFT);
+	SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1,
+	     SSB_SPROM4_TXPID2G1_SHIFT);
+	SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2,
+	     SSB_SPROM4_TXPID2G2_SHIFT);
+	SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3,
+	     SSB_SPROM4_TXPID2G3_SHIFT);
+
+	SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0,
+	     SSB_SPROM4_TXPID5GL0_SHIFT);
+	SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1,
+	     SSB_SPROM4_TXPID5GL1_SHIFT);
+	SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2,
+	     SSB_SPROM4_TXPID5GL2_SHIFT);
+	SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3,
+	     SSB_SPROM4_TXPID5GL3_SHIFT);
+
+	SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0,
+	     SSB_SPROM4_TXPID5G0_SHIFT);
+	SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1,
+	     SSB_SPROM4_TXPID5G1_SHIFT);
+	SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2,
+	     SSB_SPROM4_TXPID5G2_SHIFT);
+	SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3,
+	     SSB_SPROM4_TXPID5G3_SHIFT);
+
+	SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0,
+	     SSB_SPROM4_TXPID5GH0_SHIFT);
+	SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1,
+	     SSB_SPROM4_TXPID5GH1_SHIFT);
+	SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2,
+	     SSB_SPROM4_TXPID5GH2_SHIFT);
+	SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3,
+	     SSB_SPROM4_TXPID5GH3_SHIFT);
+
+	SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0);
+	SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0);
+	SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0);
+	SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0);
+
+	SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
+	SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
+
+	/* Extract cores power info info */
+	for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
+		o = pwr_info_offset[i];
+		SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
+			SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
+		SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
+			SSB_SPROM8_2G_MAXP, 0);
+
+		SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
+		SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
+		SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
+
+		SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
+			SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
+		SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
+			SSB_SPROM8_5G_MAXP, 0);
+		SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
+			SSB_SPROM8_5GH_MAXP, 0);
+		SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
+			SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
+
+		SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
+		SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
+		SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
+		SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
+		SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
+		SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
+		SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
+		SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
+		SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
+	}
 
-	bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
-	     SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
-	bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
-	     SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
-	bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
-	     SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
-	bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
-	     SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
-
-	bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
-	     SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
-	bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
-	     SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
-	bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
-	     SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
-	bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
-	     SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
-
-	bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
-	     SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
-	bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
-	     SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
-	bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
-	     SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
-	bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
-	     SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
-
-	bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
-	     SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
-	bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
-	     SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
-	bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
-	     SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
-	bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
-	     SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
-
-	bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
-	bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
-	bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
-	bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
-
-	bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
-
-	bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-		SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
-	bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-		SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
-	bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-		SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
-	bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-		SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
-	bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-		SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
-
-	bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-		SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
-	bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-		SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
-	bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-		SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
-	bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-		SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
-	bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-		SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+	SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS,
+	     SSB_SROM8_FEM_TSSIPOS_SHIFT);
+	SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN,
+	     SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
+	SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE,
+	     SSB_SROM8_FEM_PDET_RANGE_SHIFT);
+	SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO,
+	     SSB_SROM8_FEM_TR_ISO_SHIFT);
+	SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT,
+	     SSB_SROM8_FEM_ANTSWLUT_SHIFT);
+
+	SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS,
+	     SSB_SROM8_FEM_TSSIPOS_SHIFT);
+	SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN,
+	     SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
+	SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE,
+	     SSB_SROM8_FEM_PDET_RANGE_SHIFT);
+	SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO,
+	     SSB_SROM8_FEM_TR_ISO_SHIFT);
+	SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT,
+	     SSB_SROM8_FEM_ANTSWLUT_SHIFT);
+
+	SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
+	     SSB_SPROM8_ANTAVAIL_A_SHIFT);
+	SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
+	     SSB_SPROM8_ANTAVAIL_BG_SHIFT);
+	SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0);
+	SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG,
+	     SSB_SPROM8_ITSSI_BG_SHIFT);
+	SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
+	SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
+	     SSB_SPROM8_ITSSI_A_SHIFT);
+	SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
+	SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
+	     SSB_SPROM8_MAXP_AL_SHIFT);
+	SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
+	SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
+	     SSB_SPROM8_GPIOA_P1_SHIFT);
+	SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
+	SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
+	     SSB_SPROM8_GPIOB_P3_SHIFT);
+	SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
+	SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
+	     SSB_SPROM8_TRI5G_SHIFT);
+	SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
+	SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
+	     SSB_SPROM8_TRI5GH_SHIFT);
+	SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G,
+	     SSB_SPROM8_RXPO2G_SHIFT);
+	SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
+	     SSB_SPROM8_RXPO5G_SHIFT);
+	SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
+	SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
+	     SSB_SPROM8_RSSISMC2G_SHIFT);
+	SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
+	     SSB_SPROM8_RSSISAV2G_SHIFT);
+	SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
+	     SSB_SPROM8_BXA2G_SHIFT);
+	SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
+	SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
+	     SSB_SPROM8_RSSISMC5G_SHIFT);
+	SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
+	     SSB_SPROM8_RSSISAV5G_SHIFT);
+	SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
+	     SSB_SPROM8_BXA5G_SHIFT);
+
+	SPEX(pa0b0, SSB_SPROM8_PA0B0, ~0, 0);
+	SPEX(pa0b1, SSB_SPROM8_PA0B1, ~0, 0);
+	SPEX(pa0b2, SSB_SPROM8_PA0B2, ~0, 0);
+	SPEX(pa1b0, SSB_SPROM8_PA1B0, ~0, 0);
+	SPEX(pa1b1, SSB_SPROM8_PA1B1, ~0, 0);
+	SPEX(pa1b2, SSB_SPROM8_PA1B2, ~0, 0);
+	SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, ~0, 0);
+	SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, ~0, 0);
+	SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, ~0, 0);
+	SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, ~0, 0);
+	SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, ~0, 0);
+	SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, ~0, 0);
+	SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, ~0, 0);
+	SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, ~0, 0);
+	SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, ~0, 0);
+	SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, ~0, 0);
+	SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, ~0, 0);
+
+	/* Extract the antenna gain values. */
+	SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
+	     SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
+	SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
+	     SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
+	SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
+	     SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
+	SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
+	     SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
+
+	SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
+	     SSB_SPROM8_LEDDC_ON_SHIFT);
+	SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF,
+	     SSB_SPROM8_LEDDC_OFF_SHIFT);
+
+	SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN,
+	     SSB_SPROM8_TXRXC_TXCHAIN_SHIFT);
+	SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN,
+	     SSB_SPROM8_TXRXC_RXCHAIN_SHIFT);
+	SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH,
+	     SSB_SPROM8_TXRXC_SWITCH_SHIFT);
+
+	SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0);
+
+	SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0);
+	SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0);
+	SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0);
+	SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0);
+
+	SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP,
+	     SSB_SPROM8_RAWTS_RAWTEMP_SHIFT);
+	SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER,
+	     SSB_SPROM8_RAWTS_MEASPOWER_SHIFT);
+	SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX,
+	     SSB_SPROM8_OPT_CORRX_TEMP_SLOPE,
+	     SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT);
+	SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX,
+	     SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT);
+	SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX,
+	     SSB_SPROM8_OPT_CORRX_TEMP_OPTION,
+	     SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT);
+	SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP,
+	     SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR,
+	     SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT);
+	SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP,
+	     SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP,
+	     SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT);
+	SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL,
+	     SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT);
+
+	SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0);
+	SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0);
+	SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0);
+	SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0);
+
+	SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH,
+	     SSB_SPROM8_THERMAL_TRESH_SHIFT);
+	SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET,
+	     SSB_SPROM8_THERMAL_OFFSET_SHIFT);
+	SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA,
+	     SSB_SPROM8_TEMPDELTA_PHYCAL,
+	     SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT);
+	SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD,
+	     SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT);
+	SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA,
+	     SSB_SPROM8_TEMPDELTA_HYSTERESIS,
+	     SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
+}
+
+/*
+ * Indicates the presence of external SPROM.
+ */
+static bool bcma_sprom_ext_available(struct bcma_bus *bus)
+{
+	u32 chip_status;
+	u32 srom_control;
+	u32 present_mask;
+
+	if (bus->drv_cc.core->id.rev >= 31) {
+		if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM))
+			return false;
+
+		srom_control = bcma_read32(bus->drv_cc.core,
+					   BCMA_CC_SROM_CONTROL);
+		return srom_control & BCMA_CC_SROM_CONTROL_PRESENT;
+	}
+
+	/* older chipcommon revisions use chip status register */
+	chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT);
+	switch (bus->chipinfo.id) {
+	case BCMA_CHIP_ID_BCM4313:
+		present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT;
+		break;
+
+	case BCMA_CHIP_ID_BCM4331:
+		present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT;
+		break;
+
+	default:
+		return true;
+	}
+
+	return chip_status & present_mask;
+}
+
+/*
+ * Indicates that on-chip OTP memory is present and enabled.
+ */
+static bool bcma_sprom_onchip_available(struct bcma_bus *bus)
+{
+	u32 chip_status;
+	u32 otpsize = 0;
+	bool present;
+
+	chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT);
+	switch (bus->chipinfo.id) {
+	case BCMA_CHIP_ID_BCM4313:
+		present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT;
+		break;
+
+	case BCMA_CHIP_ID_BCM4331:
+		present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
+		break;
+
+	case BCMA_CHIP_ID_BCM43224:
+	case BCMA_CHIP_ID_BCM43225:
+		/* for these chips OTP is always available */
+		present = true;
+		break;
+	case BCMA_CHIP_ID_BCM43227:
+	case BCMA_CHIP_ID_BCM43228:
+	case BCMA_CHIP_ID_BCM43428:
+		present = chip_status & BCMA_CC_CHIPST_43228_OTP_PRESENT;
+		break;
+	default:
+		present = false;
+		break;
+	}
+
+	if (present) {
+		otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS;
+		otpsize >>= BCMA_CC_CAP_OTPS_SHIFT;
+	}
+
+	return otpsize != 0;
+}
+
+/*
+ * Verify OTP is filled and determine the byte
+ * offset where SPROM data is located.
+ *
+ * On error, returns 0; byte offset otherwise.
+ */
+static int bcma_sprom_onchip_offset(struct bcma_bus *bus)
+{
+	struct bcma_device *cc = bus->drv_cc.core;
+	u32 offset;
+
+	/* verify OTP status */
+	if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0)
+		return 0;
+
+	/* obtain bit offset from otplayout register */
+	offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET);
+	return BCMA_CC_SPROM + (offset >> 3);
 }
 
 int bcma_sprom_get(struct bcma_bus *bus)
 {
-	u16 offset;
+	u16 offset = BCMA_CC_SPROM;
 	u16 *sprom;
 	int err = 0;
 
 	if (!bus->drv_cc.core)
 		return -EOPNOTSUPP;
 
-	if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM))
-		return -ENOENT;
+	if (!bcma_sprom_ext_available(bus)) {
+		bool sprom_onchip;
+
+		/*
+		 * External SPROM takes precedence so check
+		 * on-chip OTP only when no external SPROM
+		 * is present.
+		 */
+		sprom_onchip = bcma_sprom_onchip_available(bus);
+		if (sprom_onchip) {
+			/* determine offset */
+			offset = bcma_sprom_onchip_offset(bus);
+		}
+		if (!offset || !sprom_onchip) {
+			/*
+			 * Maybe there is no SPROM on the device?
+			 * Now we ask the arch code if there is some sprom
+			 * available for this device in some other storage.
+			 */
+			err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
+			return err;
+		}
+	}
 
 	sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
 			GFP_KERNEL);
 	if (!sprom)
 		return -ENOMEM;
 
-	if (bus->chipinfo.id == 0x4331)
+	if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+	    bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
 		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
 
-	/* Most cards have SPROM moved by additional offset 0x30 (48 dwords).
-	 * According to brcm80211 this applies to cards with PCIe rev >= 6
-	 * TODO: understand this condition and use it */
-	offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM :
-		BCMA_CC_SPROM_PCIE6;
+	bcma_debug(bus, "SPROM offset 0x%x\n", offset);
 	bcma_sprom_read(bus, offset, sprom);
 
-	if (bus->chipinfo.id == 0x4331)
+	if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+	    bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
 		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
 
 	err = bcma_sprom_valid(sprom);
-	if (err)
+	if (err) {
+		bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n");
+		err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
 		goto out;
+	}
 
 	bcma_sprom_extract_r8(bus, sprom);
 
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -7,9 +7,10 @@
 #include <linux/bcma/bcma_driver_chipcommon.h>
 #include <linux/bcma/bcma_driver_pci.h>
 #include <linux/bcma/bcma_driver_mips.h>
+#include <linux/bcma/bcma_driver_gmac_cmn.h>
 #include <linux/ssb/ssb.h> /* SPROM sharing */
 
-#include "bcma_regs.h"
+#include <linux/bcma/bcma_regs.h>
 
 struct bcma_device;
 struct bcma_bus;
@@ -26,6 +27,11 @@ struct bcma_chipinfo {
 	u8 pkg;
 };
 
+struct bcma_boardinfo {
+	u16 vendor;
+	u16 type;
+};
+
 enum bcma_clkmode {
 	BCMA_CLKMODE_FAST,
 	BCMA_CLKMODE_DYNAMIC,
@@ -65,6 +71,13 @@ struct bcma_host_ops {
 
 /* Core-ID values. */
 #define BCMA_CORE_OOB_ROUTER		0x367	/* Out of band */
+#define BCMA_CORE_4706_CHIPCOMMON	0x500
+#define BCMA_CORE_4706_SOC_RAM		0x50E
+#define BCMA_CORE_4706_MAC_GBIT		0x52D
+#define BCMA_CORE_AMEMC			0x52E	/* DDR1/2 memory controller core */
+#define BCMA_CORE_ALTA			0x534	/* I2S core */
+#define BCMA_CORE_4706_MAC_GBIT_COMMON	0x5DC
+#define BCMA_CORE_DDR23_PHY		0x5DD
 #define BCMA_CORE_INVALID		0x700
 #define BCMA_CORE_CHIPCOMMON		0x800
 #define BCMA_CORE_ILINE20		0x801
@@ -121,10 +134,46 @@ struct bcma_host_ops {
 #define BCMA_CORE_I2S			0x834
 #define BCMA_CORE_SDR_DDR1_MEM_CTL	0x835	/* SDR/DDR1 memory controller core */
 #define BCMA_CORE_SHIM			0x837	/* SHIM component in ubus/6362 */
+#define BCMA_CORE_ARM_CR4		0x83e
 #define BCMA_CORE_DEFAULT		0xFFF
 
 #define BCMA_MAX_NR_CORES		16
 
+/* Chip IDs of PCIe devices */
+#define BCMA_CHIP_ID_BCM4313	0x4313
+#define BCMA_CHIP_ID_BCM43224	43224
+#define  BCMA_PKG_ID_BCM43224_FAB_CSM	0x8
+#define  BCMA_PKG_ID_BCM43224_FAB_SMIC	0xa
+#define BCMA_CHIP_ID_BCM43225	43225
+#define BCMA_CHIP_ID_BCM43227	43227
+#define BCMA_CHIP_ID_BCM43228	43228
+#define BCMA_CHIP_ID_BCM43421	43421
+#define BCMA_CHIP_ID_BCM43428	43428
+#define BCMA_CHIP_ID_BCM43431	43431
+#define BCMA_CHIP_ID_BCM43460	43460
+#define BCMA_CHIP_ID_BCM4331	0x4331
+#define BCMA_CHIP_ID_BCM6362	0x6362
+#define BCMA_CHIP_ID_BCM4360	0x4360
+#define BCMA_CHIP_ID_BCM4352	0x4352
+
+/* Chip IDs of SoCs */
+#define BCMA_CHIP_ID_BCM4706	0x5300
+#define  BCMA_PKG_ID_BCM4706L	1
+#define BCMA_CHIP_ID_BCM4716	0x4716
+#define  BCMA_PKG_ID_BCM4716	8
+#define  BCMA_PKG_ID_BCM4717	9
+#define  BCMA_PKG_ID_BCM4718	10
+#define BCMA_CHIP_ID_BCM47162	47162
+#define BCMA_CHIP_ID_BCM4748	0x4748
+#define BCMA_CHIP_ID_BCM4749	0x4749
+#define BCMA_CHIP_ID_BCM5356	0x5356
+#define BCMA_CHIP_ID_BCM5357	0x5357
+#define  BCMA_PKG_ID_BCM5358	9
+#define  BCMA_PKG_ID_BCM47186	10
+#define  BCMA_PKG_ID_BCM5357	11
+#define BCMA_CHIP_ID_BCM53572	53572
+#define  BCMA_PKG_ID_BCM47188	9
+
 struct bcma_device {
 	struct bcma_bus *bus;
 	struct bcma_device_id id;
@@ -136,8 +185,10 @@ struct bcma_device {
 	bool dev_registered;
 
 	u8 core_index;
+	u8 core_unit;
 
 	u32 addr;
+	u32 addr1;
 	u32 wrap;
 
 	void __iomem *io_addr;
@@ -175,6 +226,12 @@ int __bcma_driver_register(struct bcma_d
 
 extern void bcma_driver_unregister(struct bcma_driver *drv);
 
+/* Set a fallback SPROM.
+ * See kdoc at the function definition for complete documentation. */
+extern int bcma_arch_register_fallback_sprom(
+		int (*sprom_callback)(struct bcma_bus *bus,
+		struct ssb_sprom *out));
+
 struct bcma_bus {
 	/* The MMIO area. */
 	void __iomem *mmio;
@@ -191,14 +248,18 @@ struct bcma_bus {
 
 	struct bcma_chipinfo chipinfo;
 
+	struct bcma_boardinfo boardinfo;
+
 	struct bcma_device *mapped_core;
 	struct list_head cores;
 	u8 nr_cores;
 	u8 init_done:1;
+	u8 num;
 
 	struct bcma_drv_cc drv_cc;
-	struct bcma_drv_pci drv_pci;
+	struct bcma_drv_pci drv_pci[2];
 	struct bcma_drv_mips drv_mips;
+	struct bcma_drv_gmac_cmn drv_gmac_cmn;
 
 	/* We decided to share SPROM struct with SSB as long as we do not need
 	 * any hacks for BCMA. This simplifies drivers code. */
@@ -282,6 +343,7 @@ static inline void bcma_maskset16(struct
 	bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
 }
 
+extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid);
 extern bool bcma_core_is_enabled(struct bcma_device *core);
 extern void bcma_core_disable(struct bcma_device *core, u32 flags);
 extern int bcma_core_enable(struct bcma_device *core, u32 flags);
@@ -289,6 +351,7 @@ extern void bcma_core_set_clockmode(stru
 				    enum bcma_clkmode clkmode);
 extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
 			      bool on);
+extern u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset);
 #define BCMA_DMA_TRANSLATION_MASK	0xC0000000
 #define  BCMA_DMA_TRANSLATION_NONE	0x00000000
 #define  BCMA_DMA_TRANSLATION_DMA32_CMT	0x40000000 /* Client Mode Translation for 32-bit DMA */
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -1,6 +1,9 @@
 #ifndef LINUX_BCMA_DRIVER_CC_H_
 #define LINUX_BCMA_DRIVER_CC_H_
 
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
 /** ChipCommon core registers. **/
 #define BCMA_CC_ID			0x0000
 #define  BCMA_CC_ID_ID			0x0000FFFF
@@ -24,7 +27,7 @@
 #define   BCMA_CC_FLASHT_NONE		0x00000000	/* No flash */
 #define   BCMA_CC_FLASHT_STSER		0x00000100	/* ST serial flash */
 #define   BCMA_CC_FLASHT_ATSER		0x00000200	/* Atmel serial flash */
-#define   BCMA_CC_FLASHT_NFLASH		0x00000200
+#define   BCMA_CC_FLASHT_NFLASH		0x00000200	/* NAND flash */
 #define	  BCMA_CC_FLASHT_PARA		0x00000700	/* Parallel flash */
 #define  BCMA_CC_CAP_PLLT		0x00038000	/* PLL Type */
 #define   BCMA_PLLTYPE_NONE		0x00000000
@@ -45,6 +48,7 @@
 #define  BCMA_CC_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
 #define  BCMA_CC_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
 #define  BCMA_CC_CAP_SPROM		0x40000000	/* SPROM present */
+#define  BCMA_CC_CAP_NFLASH		0x80000000	/* NAND flash present (rev >= 35 or BCM4706?) */
 #define BCMA_CC_CORECTL			0x0008
 #define  BCMA_CC_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
 #define	 BCMA_CC_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
@@ -56,6 +60,9 @@
 #define	 BCMA_CC_OTPS_HW_PROTECT	0x00000001
 #define	 BCMA_CC_OTPS_SW_PROTECT	0x00000002
 #define	 BCMA_CC_OTPS_CID_PROTECT	0x00000004
+#define  BCMA_CC_OTPS_GU_PROG_IND	0x00000F00	/* General Use programmed indication */
+#define  BCMA_CC_OTPS_GU_PROG_IND_SHIFT	8
+#define  BCMA_CC_OTPS_GU_PROG_HW	0x00000100	/* HW region programmed */
 #define BCMA_CC_OTPC			0x0014		/* OTP control */
 #define	 BCMA_CC_OTPC_RECWAIT		0xFF000000
 #define	 BCMA_CC_OTPC_PROGWAIT		0x00FFFF00
@@ -72,6 +79,8 @@
 #define	 BCMA_CC_OTPP_READ		0x40000000
 #define	 BCMA_CC_OTPP_START		0x80000000
 #define	 BCMA_CC_OTPP_BUSY		0x80000000
+#define BCMA_CC_OTPL			0x001C		/* OTP layout */
+#define  BCMA_CC_OTPL_GURGN_OFFSET	0x00000FFF	/* offset of general use region */
 #define BCMA_CC_IRQSTAT			0x0020
 #define BCMA_CC_IRQMASK			0x0024
 #define	 BCMA_CC_IRQ_GPIO		0x00000001	/* gpio intr */
@@ -79,6 +88,23 @@
 #define	 BCMA_CC_IRQ_WDRESET		0x80000000	/* watchdog reset occurred */
 #define BCMA_CC_CHIPCTL			0x0028		/* Rev >= 11 only */
 #define BCMA_CC_CHIPSTAT		0x002C		/* Rev >= 11 only */
+#define  BCMA_CC_CHIPST_4313_SPROM_PRESENT	1
+#define  BCMA_CC_CHIPST_4313_OTP_PRESENT	2
+#define  BCMA_CC_CHIPST_4331_SPROM_PRESENT	2
+#define  BCMA_CC_CHIPST_4331_OTP_PRESENT	4
+#define  BCMA_CC_CHIPST_43228_ILP_DIV_EN	0x00000001
+#define  BCMA_CC_CHIPST_43228_OTP_PRESENT	0x00000002
+#define  BCMA_CC_CHIPST_43228_SERDES_REFCLK_PADSEL	0x00000004
+#define  BCMA_CC_CHIPST_43228_SDIO_MODE		0x00000008
+#define  BCMA_CC_CHIPST_43228_SDIO_OTP_PRESENT	0x00000010
+#define  BCMA_CC_CHIPST_43228_SDIO_RESET	0x00000020
+#define  BCMA_CC_CHIPST_4706_PKG_OPTION		BIT(0) /* 0: full-featured package 1: low-cost package */
+#define  BCMA_CC_CHIPST_4706_SFLASH_PRESENT	BIT(1) /* 0: parallel, 1: serial flash is present */
+#define  BCMA_CC_CHIPST_4706_SFLASH_TYPE	BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */
+#define  BCMA_CC_CHIPST_4706_MIPS_BENDIAN	BIT(3) /* 0: little, 1: big endian */
+#define  BCMA_CC_CHIPST_4706_PCIE1_DISABLE	BIT(5) /* PCIE1 enable strap pin */
+#define  BCMA_CC_CHIPST_5357_NAND_BOOT		BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
+#define  BCMA_CC_CHIPST_4360_XTAL_40MZ		0x00000001
 #define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
 #define  BCMA_CC_JCMD_START		0x80000000
 #define  BCMA_CC_JCMD_BUSY		0x80000000
@@ -108,10 +134,58 @@
 #define  BCMA_CC_JCTL_EXT_EN		2		/* Enable external targets */
 #define  BCMA_CC_JCTL_EN		1		/* Enable Jtag master */
 #define BCMA_CC_FLASHCTL		0x0040
+/* Start/busy bit in flashcontrol */
+#define  BCMA_CC_FLASHCTL_OPCODE	0x000000ff
+#define  BCMA_CC_FLASHCTL_ACTION	0x00000700
+#define  BCMA_CC_FLASHCTL_CS_ACTIVE	0x00001000	/* Chip Select Active, rev >= 20 */
 #define  BCMA_CC_FLASHCTL_START		0x80000000
 #define  BCMA_CC_FLASHCTL_BUSY		BCMA_CC_FLASHCTL_START
+/* Flashcontrol action + opcodes for ST flashes */
+#define  BCMA_CC_FLASHCTL_ST_WREN	0x0006		/* Write Enable */
+#define  BCMA_CC_FLASHCTL_ST_WRDIS	0x0004		/* Write Disable */
+#define  BCMA_CC_FLASHCTL_ST_RDSR	0x0105		/* Read Status Register */
+#define  BCMA_CC_FLASHCTL_ST_WRSR	0x0101		/* Write Status Register */
+#define  BCMA_CC_FLASHCTL_ST_READ	0x0303		/* Read Data Bytes */
+#define  BCMA_CC_FLASHCTL_ST_PP		0x0302		/* Page Program */
+#define  BCMA_CC_FLASHCTL_ST_SE		0x02d8		/* Sector Erase */
+#define  BCMA_CC_FLASHCTL_ST_BE		0x00c7		/* Bulk Erase */
+#define  BCMA_CC_FLASHCTL_ST_DP		0x00b9		/* Deep Power-down */
+#define  BCMA_CC_FLASHCTL_ST_RES	0x03ab		/* Read Electronic Signature */
+#define  BCMA_CC_FLASHCTL_ST_CSA	0x1000		/* Keep chip select asserted */
+#define  BCMA_CC_FLASHCTL_ST_SSE	0x0220		/* Sub-sector Erase */
+/* Flashcontrol action + opcodes for Atmel flashes */
+#define  BCMA_CC_FLASHCTL_AT_READ			0x07e8
+#define  BCMA_CC_FLASHCTL_AT_PAGE_READ			0x07d2
+#define  BCMA_CC_FLASHCTL_AT_STATUS			0x01d7
+#define  BCMA_CC_FLASHCTL_AT_BUF1_WRITE			0x0384
+#define  BCMA_CC_FLASHCTL_AT_BUF2_WRITE			0x0387
+#define  BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM		0x0283
+#define  BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM		0x0286
+#define  BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM		0x0288
+#define  BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM		0x0289
+#define  BCMA_CC_FLASHCTL_AT_PAGE_ERASE			0x0281
+#define  BCMA_CC_FLASHCTL_AT_BLOCK_ERASE		0x0250
+#define  BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM	0x0382
+#define  BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM	0x0385
+#define  BCMA_CC_FLASHCTL_AT_BUF1_LOAD			0x0253
+#define  BCMA_CC_FLASHCTL_AT_BUF2_LOAD			0x0255
+#define  BCMA_CC_FLASHCTL_AT_BUF1_COMPARE		0x0260
+#define  BCMA_CC_FLASHCTL_AT_BUF2_COMPARE		0x0261
+#define  BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM		0x0258
+#define  BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM		0x0259
 #define BCMA_CC_FLASHADDR		0x0044
 #define BCMA_CC_FLASHDATA		0x0048
+/* Status register bits for ST flashes */
+#define  BCMA_CC_FLASHDATA_ST_WIP	0x01		/* Write In Progress */
+#define  BCMA_CC_FLASHDATA_ST_WEL	0x02		/* Write Enable Latch */
+#define  BCMA_CC_FLASHDATA_ST_BP_MASK	0x1c		/* Block Protect */
+#define  BCMA_CC_FLASHDATA_ST_BP_SHIFT	2
+#define  BCMA_CC_FLASHDATA_ST_SRWD	0x80		/* Status Register Write Disable */
+/* Status register bits for Atmel flashes */
+#define  BCMA_CC_FLASHDATA_AT_READY	0x80
+#define  BCMA_CC_FLASHDATA_AT_MISMATCH	0x40
+#define  BCMA_CC_FLASHDATA_AT_ID_MASK	0x38
+#define  BCMA_CC_FLASHDATA_AT_ID_SHIFT	3
 #define BCMA_CC_BCAST_ADDR		0x0050
 #define BCMA_CC_BCAST_DATA		0x0054
 #define BCMA_CC_GPIOPULLUP		0x0058		/* Rev >= 20 only */
@@ -181,6 +255,45 @@
 #define BCMA_CC_FLASH_CFG		0x0128
 #define  BCMA_CC_FLASH_CFG_DS		0x0010	/* Data size, 0=8bit, 1=16bit */
 #define BCMA_CC_FLASH_WAITCNT		0x012C
+#define BCMA_CC_SROM_CONTROL		0x0190
+#define  BCMA_CC_SROM_CONTROL_START	0x80000000
+#define  BCMA_CC_SROM_CONTROL_BUSY	0x80000000
+#define  BCMA_CC_SROM_CONTROL_OPCODE	0x60000000
+#define  BCMA_CC_SROM_CONTROL_OP_READ	0x00000000
+#define  BCMA_CC_SROM_CONTROL_OP_WRITE	0x20000000
+#define  BCMA_CC_SROM_CONTROL_OP_WRDIS	0x40000000
+#define  BCMA_CC_SROM_CONTROL_OP_WREN	0x60000000
+#define  BCMA_CC_SROM_CONTROL_OTPSEL	0x00000010
+#define  BCMA_CC_SROM_CONTROL_LOCK	0x00000008
+#define  BCMA_CC_SROM_CONTROL_SIZE_MASK	0x00000006
+#define  BCMA_CC_SROM_CONTROL_SIZE_1K	0x00000000
+#define  BCMA_CC_SROM_CONTROL_SIZE_4K	0x00000002
+#define  BCMA_CC_SROM_CONTROL_SIZE_16K	0x00000004
+#define  BCMA_CC_SROM_CONTROL_SIZE_SHIFT	1
+#define  BCMA_CC_SROM_CONTROL_PRESENT	0x00000001
+/* Block 0x140 - 0x190 registers are chipset specific */
+#define BCMA_CC_4706_FLASHSCFG		0x18C		/* Flash struct configuration */
+#define  BCMA_CC_4706_FLASHSCFG_MASK	0x000000ff
+#define  BCMA_CC_4706_FLASHSCFG_SF1	0x00000001	/* 2nd serial flash present */
+#define  BCMA_CC_4706_FLASHSCFG_PF1	0x00000002	/* 2nd parallel flash present */
+#define  BCMA_CC_4706_FLASHSCFG_SF1_TYPE	0x00000004	/* 2nd serial flash type : 0 : ST, 1 : Atmel */
+#define  BCMA_CC_4706_FLASHSCFG_NF1	0x00000008	/* 2nd NAND flash present */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_MASK	0x000000f0
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_4MB	0x00000010	/* 4MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_8MB	0x00000020	/* 8MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_16MB	0x00000030	/* 16MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_32MB	0x00000040	/* 32MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_64MB	0x00000050	/* 64MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_128MB	0x00000060	/* 128MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_256MB	0x00000070	/* 256MB */
+/* NAND flash registers for BCM4706 (corerev = 31) */
+#define BCMA_CC_NFLASH_CTL		0x01A0
+#define  BCMA_CC_NFLASH_CTL_ERR		0x08000000
+#define BCMA_CC_NFLASH_CONF		0x01A4
+#define BCMA_CC_NFLASH_COL_ADDR		0x01A8
+#define BCMA_CC_NFLASH_ROW_ADDR		0x01AC
+#define BCMA_CC_NFLASH_DATA		0x01B0
+#define BCMA_CC_NFLASH_WAITCNT0		0x01B4
 /* 0x1E0 is defined as shared BCMA_CLKCTLST */
 #define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
 #define BCMA_CC_UART0_DATA		0x0300
@@ -203,6 +316,9 @@
 #define BCMA_CC_PMU_CTL			0x0600 /* PMU control */
 #define  BCMA_CC_PMU_CTL_ILP_DIV	0xFFFF0000 /* ILP div mask */
 #define  BCMA_CC_PMU_CTL_ILP_DIV_SHIFT	16
+#define  BCMA_CC_PMU_CTL_RES		0x00006000 /* reset control mask */
+#define  BCMA_CC_PMU_CTL_RES_SHIFT	13
+#define  BCMA_CC_PMU_CTL_RES_RELOAD	0x2	/* reload POR values */
 #define  BCMA_CC_PMU_CTL_PLL_UPD	0x00000400
 #define  BCMA_CC_PMU_CTL_NOILPONW	0x00000200 /* No ILP on wait */
 #define  BCMA_CC_PMU_CTL_HTREQEN	0x00000100 /* HT req enable */
@@ -240,7 +356,60 @@
 #define BCMA_CC_PLLCTL_ADDR		0x0660
 #define BCMA_CC_PLLCTL_DATA		0x0664
 #define BCMA_CC_SPROM			0x0800 /* SPROM beginning */
-#define BCMA_CC_SPROM_PCIE6		0x0830 /* SPROM beginning on PCIe rev >= 6 */
+/* NAND flash MLC controller registers (corerev >= 38) */
+#define BCMA_CC_NAND_REVISION		0x0C00
+#define BCMA_CC_NAND_CMD_START		0x0C04
+#define BCMA_CC_NAND_CMD_ADDR_X		0x0C08
+#define BCMA_CC_NAND_CMD_ADDR		0x0C0C
+#define BCMA_CC_NAND_CMD_END_ADDR	0x0C10
+#define BCMA_CC_NAND_CS_NAND_SELECT	0x0C14
+#define BCMA_CC_NAND_CS_NAND_XOR	0x0C18
+#define BCMA_CC_NAND_SPARE_RD0		0x0C20
+#define BCMA_CC_NAND_SPARE_RD4		0x0C24
+#define BCMA_CC_NAND_SPARE_RD8		0x0C28
+#define BCMA_CC_NAND_SPARE_RD12		0x0C2C
+#define BCMA_CC_NAND_SPARE_WR0		0x0C30
+#define BCMA_CC_NAND_SPARE_WR4		0x0C34
+#define BCMA_CC_NAND_SPARE_WR8		0x0C38
+#define BCMA_CC_NAND_SPARE_WR12		0x0C3C
+#define BCMA_CC_NAND_ACC_CONTROL	0x0C40
+#define BCMA_CC_NAND_CONFIG		0x0C48
+#define BCMA_CC_NAND_TIMING_1		0x0C50
+#define BCMA_CC_NAND_TIMING_2		0x0C54
+#define BCMA_CC_NAND_SEMAPHORE		0x0C58
+#define BCMA_CC_NAND_DEVID		0x0C60
+#define BCMA_CC_NAND_DEVID_X		0x0C64
+#define BCMA_CC_NAND_BLOCK_LOCK_STATUS	0x0C68
+#define BCMA_CC_NAND_INTFC_STATUS	0x0C6C
+#define BCMA_CC_NAND_ECC_CORR_ADDR_X	0x0C70
+#define BCMA_CC_NAND_ECC_CORR_ADDR	0x0C74
+#define BCMA_CC_NAND_ECC_UNC_ADDR_X	0x0C78
+#define BCMA_CC_NAND_ECC_UNC_ADDR	0x0C7C
+#define BCMA_CC_NAND_READ_ERROR_COUNT	0x0C80
+#define BCMA_CC_NAND_CORR_STAT_THRESHOLD	0x0C84
+#define BCMA_CC_NAND_READ_ADDR_X	0x0C90
+#define BCMA_CC_NAND_READ_ADDR		0x0C94
+#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR_X	0x0C98
+#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR	0x0C9C
+#define BCMA_CC_NAND_COPY_BACK_ADDR_X	0x0CA0
+#define BCMA_CC_NAND_COPY_BACK_ADDR	0x0CA4
+#define BCMA_CC_NAND_BLOCK_ERASE_ADDR_X	0x0CA8
+#define BCMA_CC_NAND_BLOCK_ERASE_ADDR	0x0CAC
+#define BCMA_CC_NAND_INV_READ_ADDR_X	0x0CB0
+#define BCMA_CC_NAND_INV_READ_ADDR	0x0CB4
+#define BCMA_CC_NAND_BLK_WR_PROTECT	0x0CC0
+#define BCMA_CC_NAND_ACC_CONTROL_CS1	0x0CD0
+#define BCMA_CC_NAND_CONFIG_CS1		0x0CD4
+#define BCMA_CC_NAND_TIMING_1_CS1	0x0CD8
+#define BCMA_CC_NAND_TIMING_2_CS1	0x0CDC
+#define BCMA_CC_NAND_SPARE_RD16		0x0D30
+#define BCMA_CC_NAND_SPARE_RD20		0x0D34
+#define BCMA_CC_NAND_SPARE_RD24		0x0D38
+#define BCMA_CC_NAND_SPARE_RD28		0x0D3C
+#define BCMA_CC_NAND_CACHE_ADDR		0x0D40
+#define BCMA_CC_NAND_CACHE_DATA		0x0D44
+#define BCMA_CC_NAND_CTRL_CONFIG	0x0D48
+#define BCMA_CC_NAND_CTRL_STATUS	0x0D4C
 
 /* Divider allocation in 4716/47162/5356 */
 #define BCMA_CC_PMU5_MAINPLL_CPU	1
@@ -256,6 +425,15 @@
 
 /* 4706 PMU */
 #define BCMA_CC_PMU4706_MAINPLL_PLL0	0
+#define BCMA_CC_PMU6_4706_PROCPLL_OFF	4	/* The CPU PLL */
+#define  BCMA_CC_PMU6_4706_PROC_P2DIV_MASK	0x000f0000
+#define  BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT	16
+#define  BCMA_CC_PMU6_4706_PROC_P1DIV_MASK	0x0000f000
+#define  BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT	12
+#define  BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK	0x00000ff8
+#define  BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT	3
+#define  BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK	0x00000007
+#define  BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT	0
 
 /* ALP clock on pre-PMU chips */
 #define BCMA_CC_PMU_ALP_CLOCK		20000000
@@ -284,6 +462,19 @@
 #define BCMA_CC_PPL_PCHI_OFF		5
 #define BCMA_CC_PPL_PCHI_MASK		0x0000003f
 
+#define BCMA_CC_PMU_PLL_CTL0		0
+#define BCMA_CC_PMU_PLL_CTL1		1
+#define BCMA_CC_PMU_PLL_CTL2		2
+#define BCMA_CC_PMU_PLL_CTL3		3
+#define BCMA_CC_PMU_PLL_CTL4		4
+#define BCMA_CC_PMU_PLL_CTL5		5
+
+#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK	0x00f00000
+#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT	20
+
+#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK	0x1ff00000
+#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT	20
+
 /* BCM4331 ChipControl numbers. */
 #define BCMA_CHIPCTL_4331_BT_COEXIST		BIT(0)	/* 0 disable */
 #define BCMA_CHIPCTL_4331_SECI			BIT(1)	/* 0 SECI is disabled (JATG functional) */
@@ -297,9 +488,25 @@
 #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN	BIT(9)	/* override core control on pipe_AuxPowerDown */
 #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN		BIT(10)	/* pcie_auxclkenable */
 #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN	BIT(11)	/* pcie_pipe_pllpowerdown */
+#define BCMA_CHIPCTL_4331_EXTPA_EN2		BIT(12)	/* 0 ext pa disable, 1 ext pa enabled */
 #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4	BIT(16)	/* enable bt_shd0 at gpio4 */
 #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5	BIT(17)	/* enable bt_shd1 at gpio5 */
 
+/* 43224 chip-specific ChipControl register bits */
+#define BCMA_CCTRL_43224_GPIO_TOGGLE		0x8000		/* gpio[3:0] pins as btcoex or s/w gpio */
+#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE	0x00F000F0	/* 12 mA drive strength */
+#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE	0xF0		/* 12 mA drive strength for later 43224s */
+
+/* 4313 Chip specific ChipControl register bits */
+#define BCMA_CCTRL_4313_12MA_LED_DRIVE		0x00000007	/* 12 mA drive strengh for later 4313 */
+
+/* BCM5357 ChipControl register bits */
+#define BCMA_CHIPCTL_5357_EXTPA			BIT(14)
+#define BCMA_CHIPCTL_5357_ANT_MUX_2O3		BIT(15)
+#define BCMA_CHIPCTL_5357_NFLASH		BIT(16)
+#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE	BIT(18)
+#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE	BIT(19)
+
 /* Data for the PMU, if available.
  * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
  */
@@ -310,11 +517,35 @@ struct bcma_chipcommon_pmu {
 
 #ifdef CONFIG_BCMA_DRIVER_MIPS
 struct bcma_pflash {
+	bool present;
 	u8 buswidth;
 	u32 window;
 	u32 window_size;
 };
 
+#ifdef CONFIG_BCMA_SFLASH
+struct bcma_sflash {
+	bool present;
+	u32 window;
+	u32 blocksize;
+	u16 numblocks;
+	u32 size;
+
+	struct mtd_info *mtd;
+};
+#endif
+
+#ifdef CONFIG_BCMA_NFLASH
+struct mtd_info;
+
+struct bcma_nflash {
+	bool present;
+	bool boot;		/* This is the flash the SoC boots from */
+
+	struct mtd_info *mtd;
+};
+#endif
+
 struct bcma_serial_port {
 	void *regs;
 	unsigned long clockspeed;
@@ -330,15 +561,30 @@ struct bcma_drv_cc {
 	u32 capabilities;
 	u32 capabilities_ext;
 	u8 setup_done:1;
+	u8 early_setup_done:1;
 	/* Fast Powerup Delay constant */
 	u16 fast_pwrup_delay;
 	struct bcma_chipcommon_pmu pmu;
 #ifdef CONFIG_BCMA_DRIVER_MIPS
 	struct bcma_pflash pflash;
+#ifdef CONFIG_BCMA_SFLASH
+	struct bcma_sflash sflash;
+#endif
+#ifdef CONFIG_BCMA_NFLASH
+	struct bcma_nflash nflash;
+#endif
 
 	int nr_serial_ports;
 	struct bcma_serial_port serial_ports[4];
 #endif /* CONFIG_BCMA_DRIVER_MIPS */
+	u32 ticks_per_ms;
+	struct platform_device *watchdog;
+
+	/* Lock for GPIO register access. */
+	spinlock_t gpio_lock;
+#ifdef CONFIG_BCMA_DRIVER_GPIO
+	struct gpio_chip gpio;
+#endif
 };
 
 /* Register access */
@@ -355,14 +601,16 @@ struct bcma_drv_cc {
 	bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
 
 extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
+extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
 
 extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
 extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
 
 void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
 
-extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
-					  u32 ticks);
+extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
+
+extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
 
 void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
 
@@ -375,9 +623,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
 u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
 u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
 u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value);
 
 /* PMU support */
 extern void bcma_pmu_init(struct bcma_drv_cc *cc);
+extern void bcma_pmu_early_init(struct bcma_drv_cc *cc);
 
 extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
 				  u32 value);
@@ -387,5 +638,6 @@ extern void bcma_chipco_chipctl_maskset(
 					u32 offset, u32 mask, u32 set);
 extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
 				       u32 offset, u32 mask, u32 set);
+extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
 
 #endif /* LINUX_BCMA_DRIVER_CC_H_ */
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_gmac_cmn.h
@@ -0,0 +1,100 @@
+#ifndef LINUX_BCMA_DRIVER_GMAC_CMN_H_
+#define LINUX_BCMA_DRIVER_GMAC_CMN_H_
+
+#include <linux/types.h>
+
+#define BCMA_GMAC_CMN_STAG0		0x000
+#define BCMA_GMAC_CMN_STAG1		0x004
+#define BCMA_GMAC_CMN_STAG2		0x008
+#define BCMA_GMAC_CMN_STAG3		0x00C
+#define BCMA_GMAC_CMN_PARSER_CTL	0x020
+#define BCMA_GMAC_CMN_MIB_MAX_LEN	0x024
+#define BCMA_GMAC_CMN_PHY_ACCESS	0x100
+#define  BCMA_GMAC_CMN_PA_DATA_MASK	0x0000ffff
+#define  BCMA_GMAC_CMN_PA_ADDR_MASK	0x001f0000
+#define  BCMA_GMAC_CMN_PA_ADDR_SHIFT	16
+#define  BCMA_GMAC_CMN_PA_REG_MASK	0x1f000000
+#define  BCMA_GMAC_CMN_PA_REG_SHIFT	24
+#define  BCMA_GMAC_CMN_PA_WRITE		0x20000000
+#define  BCMA_GMAC_CMN_PA_START		0x40000000
+#define BCMA_GMAC_CMN_PHY_CTL		0x104
+#define  BCMA_GMAC_CMN_PC_EPA_MASK	0x0000001f
+#define  BCMA_GMAC_CMN_PC_MCT_MASK	0x007f0000
+#define  BCMA_GMAC_CMN_PC_MCT_SHIFT	16
+#define  BCMA_GMAC_CMN_PC_MTE		0x00800000
+#define BCMA_GMAC_CMN_GMAC0_RGMII_CTL	0x110
+#define BCMA_GMAC_CMN_CFP_ACCESS	0x200
+#define BCMA_GMAC_CMN_CFP_TCAM_DATA0	0x210
+#define BCMA_GMAC_CMN_CFP_TCAM_DATA1	0x214
+#define BCMA_GMAC_CMN_CFP_TCAM_DATA2	0x218
+#define BCMA_GMAC_CMN_CFP_TCAM_DATA3	0x21C
+#define BCMA_GMAC_CMN_CFP_TCAM_DATA4	0x220
+#define BCMA_GMAC_CMN_CFP_TCAM_DATA5	0x224
+#define BCMA_GMAC_CMN_CFP_TCAM_DATA6	0x228
+#define BCMA_GMAC_CMN_CFP_TCAM_DATA7	0x22C
+#define BCMA_GMAC_CMN_CFP_TCAM_MASK0	0x230
+#define BCMA_GMAC_CMN_CFP_TCAM_MASK1	0x234
+#define BCMA_GMAC_CMN_CFP_TCAM_MASK2	0x238
+#define BCMA_GMAC_CMN_CFP_TCAM_MASK3	0x23C
+#define BCMA_GMAC_CMN_CFP_TCAM_MASK4	0x240
+#define BCMA_GMAC_CMN_CFP_TCAM_MASK5	0x244
+#define BCMA_GMAC_CMN_CFP_TCAM_MASK6	0x248
+#define BCMA_GMAC_CMN_CFP_TCAM_MASK7	0x24C
+#define BCMA_GMAC_CMN_CFP_ACTION_DATA	0x250
+#define BCMA_GMAC_CMN_TCAM_BIST_CTL	0x2A0
+#define BCMA_GMAC_CMN_TCAM_BIST_STATUS	0x2A4
+#define BCMA_GMAC_CMN_TCAM_CMP_STATUS	0x2A8
+#define BCMA_GMAC_CMN_TCAM_DISABLE	0x2AC
+#define BCMA_GMAC_CMN_TCAM_TEST_CTL	0x2F0
+#define BCMA_GMAC_CMN_UDF_0_A3_A0	0x300
+#define BCMA_GMAC_CMN_UDF_0_A7_A4	0x304
+#define BCMA_GMAC_CMN_UDF_0_A8		0x308
+#define BCMA_GMAC_CMN_UDF_1_A3_A0	0x310
+#define BCMA_GMAC_CMN_UDF_1_A7_A4	0x314
+#define BCMA_GMAC_CMN_UDF_1_A8		0x318
+#define BCMA_GMAC_CMN_UDF_2_A3_A0	0x320
+#define BCMA_GMAC_CMN_UDF_2_A7_A4	0x324
+#define BCMA_GMAC_CMN_UDF_2_A8		0x328
+#define BCMA_GMAC_CMN_UDF_0_B3_B0	0x330
+#define BCMA_GMAC_CMN_UDF_0_B7_B4	0x334
+#define BCMA_GMAC_CMN_UDF_0_B8		0x338
+#define BCMA_GMAC_CMN_UDF_1_B3_B0	0x340
+#define BCMA_GMAC_CMN_UDF_1_B7_B4	0x344
+#define BCMA_GMAC_CMN_UDF_1_B8		0x348
+#define BCMA_GMAC_CMN_UDF_2_B3_B0	0x350
+#define BCMA_GMAC_CMN_UDF_2_B7_B4	0x354
+#define BCMA_GMAC_CMN_UDF_2_B8		0x358
+#define BCMA_GMAC_CMN_UDF_0_C3_C0	0x360
+#define BCMA_GMAC_CMN_UDF_0_C7_C4	0x364
+#define BCMA_GMAC_CMN_UDF_0_C8		0x368
+#define BCMA_GMAC_CMN_UDF_1_C3_C0	0x370
+#define BCMA_GMAC_CMN_UDF_1_C7_C4	0x374
+#define BCMA_GMAC_CMN_UDF_1_C8		0x378
+#define BCMA_GMAC_CMN_UDF_2_C3_C0	0x380
+#define BCMA_GMAC_CMN_UDF_2_C7_C4	0x384
+#define BCMA_GMAC_CMN_UDF_2_C8		0x388
+#define BCMA_GMAC_CMN_UDF_0_D3_D0	0x390
+#define BCMA_GMAC_CMN_UDF_0_D7_D4	0x394
+#define BCMA_GMAC_CMN_UDF_0_D11_D8	0x394
+
+struct bcma_drv_gmac_cmn {
+	struct bcma_device *core;
+
+	/* Drivers accessing BCMA_GMAC_CMN_PHY_ACCESS and
+	 * BCMA_GMAC_CMN_PHY_CTL need to take that mutex first. */
+	struct mutex phy_mutex;
+};
+
+/* Register access */
+#define gmac_cmn_read16(gc, offset)		bcma_read16((gc)->core, offset)
+#define gmac_cmn_read32(gc, offset)		bcma_read32((gc)->core, offset)
+#define gmac_cmn_write16(gc, offset, val)	bcma_write16((gc)->core, offset, val)
+#define gmac_cmn_write32(gc, offset, val)	bcma_write32((gc)->core, offset, val)
+
+#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN
+extern void __devinit bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc);
+#else
+static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc) { }
+#endif
+
+#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */
--- a/include/linux/bcma/bcma_driver_mips.h
+++ b/include/linux/bcma/bcma_driver_mips.h
@@ -35,13 +35,15 @@ struct bcma_device;
 struct bcma_drv_mips {
 	struct bcma_device *core;
 	u8 setup_done:1;
-	unsigned int assigned_irqs;
+	u8 early_setup_done:1;
 };
 
 #ifdef CONFIG_BCMA_DRIVER_MIPS
 extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
 #else
 static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
 #endif
 
 extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -53,11 +53,47 @@ struct pci_dev;
 #define  BCMA_CORE_PCI_SBTOPCI1_MASK		0xFC000000
 #define BCMA_CORE_PCI_SBTOPCI2			0x0108	/* Backplane to PCI translation 2 (sbtopci2) */
 #define  BCMA_CORE_PCI_SBTOPCI2_MASK		0xC0000000
+#define BCMA_CORE_PCI_CONFIG_ADDR		0x0120	/* pcie config space access */
+#define BCMA_CORE_PCI_CONFIG_DATA		0x0124	/* pcie config space access */
+#define BCMA_CORE_PCI_MDIO_CONTROL		0x0128	/* controls the mdio access */
+#define  BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK	0x7f	/* clock to be used on MDIO */
+#define  BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL	0x2
+#define  BCMA_CORE_PCI_MDIOCTL_PREAM_EN		0x80	/* Enable preamble sequnce */
+#define  BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE	0x100	/* Tranaction complete */
+#define BCMA_CORE_PCI_MDIO_DATA			0x012c	/* Data to the mdio access */
+#define  BCMA_CORE_PCI_MDIODATA_MASK		0x0000ffff /* data 2 bytes */
+#define  BCMA_CORE_PCI_MDIODATA_TA		0x00020000 /* Turnaround */
+#define  BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD	18	/* Regaddr shift (rev < 10) */
+#define  BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD	0x003c0000 /* Regaddr Mask (rev < 10) */
+#define  BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD	22	/* Physmedia devaddr shift (rev < 10) */
+#define  BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD	0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */
+#define  BCMA_CORE_PCI_MDIODATA_REGADDR_SHF	18	/* Regaddr shift */
+#define  BCMA_CORE_PCI_MDIODATA_REGADDR_MASK	0x007c0000 /* Regaddr Mask */
+#define  BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF	23	/* Physmedia devaddr shift */
+#define  BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK	0x0f800000 /* Physmedia devaddr Mask */
+#define  BCMA_CORE_PCI_MDIODATA_WRITE		0x10000000 /* write Transaction */
+#define  BCMA_CORE_PCI_MDIODATA_READ		0x20000000 /* Read Transaction */
+#define  BCMA_CORE_PCI_MDIODATA_START		0x40000000 /* start of Transaction */
+#define  BCMA_CORE_PCI_MDIODATA_DEV_ADDR	0x0	/* dev address for serdes */
+#define  BCMA_CORE_PCI_MDIODATA_BLK_ADDR	0x1F	/* blk address for serdes */
+#define  BCMA_CORE_PCI_MDIODATA_DEV_PLL		0x1d	/* SERDES PLL Dev */
+#define  BCMA_CORE_PCI_MDIODATA_DEV_TX		0x1e	/* SERDES TX Dev */
+#define  BCMA_CORE_PCI_MDIODATA_DEV_RX		0x1f	/* SERDES RX Dev */
+#define BCMA_CORE_PCI_PCIEIND_ADDR		0x0130	/* indirect access to the internal register */
+#define BCMA_CORE_PCI_PCIEIND_DATA		0x0134	/* Data to/from the internal regsiter */
+#define BCMA_CORE_PCI_CLKREQENCTRL		0x0138	/*  >= rev 6, Clkreq rdma control */
 #define BCMA_CORE_PCI_PCICFG0			0x0400	/* PCI config space 0 (rev >= 8) */
 #define BCMA_CORE_PCI_PCICFG1			0x0500	/* PCI config space 1 (rev >= 8) */
 #define BCMA_CORE_PCI_PCICFG2			0x0600	/* PCI config space 2 (rev >= 8) */
 #define BCMA_CORE_PCI_PCICFG3			0x0700	/* PCI config space 3 (rev >= 8) */
 #define BCMA_CORE_PCI_SPROM(wordoffset)		(0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
+#define  BCMA_CORE_PCI_SPROM_PI_OFFSET		0	/* first word */
+#define   BCMA_CORE_PCI_SPROM_PI_MASK		0xf000	/* bit 15:12 */
+#define   BCMA_CORE_PCI_SPROM_PI_SHIFT		12	/* bit 15:12 */
+#define  BCMA_CORE_PCI_SPROM_MISC_CONFIG	5	/* word 5 */
+#define   BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST	0x8000	/* bit 15 */
+#define   BCMA_CORE_PCI_SPROM_CLKREQ_OFFSET_REV5	20	/* word 20 for srom rev <= 5 */
+#define   BCMA_CORE_PCI_SPROM_CLKREQ_ENB	0x0800	/* bit 11 */
 
 /* SBtoPCIx */
 #define BCMA_CORE_PCI_SBTOPCI_MEM		0x00000000
@@ -72,20 +108,118 @@ struct pci_dev;
 #define  BCMA_CORE_PCI_SBTOPCI_RC_READL		0x00000010 /* Memory read line */
 #define  BCMA_CORE_PCI_SBTOPCI_RC_READM		0x00000020 /* Memory read multiple */
 
+/* PCIE protocol PHY diagnostic registers */
+#define BCMA_CORE_PCI_PLP_MODEREG		0x200	/* Mode */
+#define BCMA_CORE_PCI_PLP_STATUSREG		0x204	/* Status */
+#define  BCMA_CORE_PCI_PLP_POLARITYINV_STAT	0x10	/* Status reg PCIE_PLP_STATUSREG */
+#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG		0x208	/* LTSSM control */
+#define BCMA_CORE_PCI_PLP_LTLINKNUMREG		0x20c	/* Link Training Link number */
+#define BCMA_CORE_PCI_PLP_LTLANENUMREG		0x210	/* Link Training Lane number */
+#define BCMA_CORE_PCI_PLP_LTNFTSREG		0x214	/* Link Training N_FTS */
+#define BCMA_CORE_PCI_PLP_ATTNREG		0x218	/* Attention */
+#define BCMA_CORE_PCI_PLP_ATTNMASKREG		0x21C	/* Attention Mask */
+#define BCMA_CORE_PCI_PLP_RXERRCTR		0x220	/* Rx Error */
+#define BCMA_CORE_PCI_PLP_RXFRMERRCTR		0x224	/* Rx Framing Error */
+#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG	0x228	/* Rx Error threshold */
+#define BCMA_CORE_PCI_PLP_TESTCTRLREG		0x22C	/* Test Control reg */
+#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG	0x230	/* SERDES Control Override */
+#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG		0x234	/* Timing param override */
+#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG		0x238	/* RXTX State Machine Diag */
+#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG		0x23C	/* LTSSM State Machine Diag */
+
+/* PCIE protocol DLLP diagnostic registers */
+#define BCMA_CORE_PCI_DLLP_LCREG		0x100	/* Link Control */
+#define BCMA_CORE_PCI_DLLP_LSREG		0x104	/* Link Status */
+#define BCMA_CORE_PCI_DLLP_LAREG		0x108	/* Link Attention */
+#define  BCMA_CORE_PCI_DLLP_LSREG_LINKUP	(1 << 16)
+#define BCMA_CORE_PCI_DLLP_LAMASKREG		0x10C	/* Link Attention Mask */
+#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG	0x110	/* Next Tx Seq Num */
+#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG	0x114	/* Acked Tx Seq Num */
+#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG	0x118	/* Purged Tx Seq Num */
+#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG		0x11C	/* Rx Sequence Number */
+#define BCMA_CORE_PCI_DLLP_LRREG		0x120	/* Link Replay */
+#define BCMA_CORE_PCI_DLLP_LACKTOREG		0x124	/* Link Ack Timeout */
+#define BCMA_CORE_PCI_DLLP_PMTHRESHREG		0x128	/* Power Management Threshold */
+#define  BCMA_CORE_PCI_ASPMTIMER_EXTEND		0x01000000 /* > rev7: enable extend ASPM timer */
+#define BCMA_CORE_PCI_DLLP_RTRYWPREG		0x12C	/* Retry buffer write ptr */
+#define BCMA_CORE_PCI_DLLP_RTRYRPREG		0x130	/* Retry buffer Read ptr */
+#define BCMA_CORE_PCI_DLLP_RTRYPPREG		0x134	/* Retry buffer Purged ptr */
+#define BCMA_CORE_PCI_DLLP_RTRRWREG		0x138	/* Retry buffer Read/Write */
+#define BCMA_CORE_PCI_DLLP_ECTHRESHREG		0x13C	/* Error Count Threshold */
+#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG		0x140	/* TLP Error Counter */
+#define BCMA_CORE_PCI_DLLP_ERRCTRREG		0x144	/* Error Counter */
+#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG		0x148	/* NAK Received Counter */
+#define BCMA_CORE_PCI_DLLP_TESTREG		0x14C	/* Test */
+#define BCMA_CORE_PCI_DLLP_PKTBIST		0x150	/* Packet BIST */
+#define BCMA_CORE_PCI_DLLP_PCIE11		0x154	/* DLLP PCIE 1.1 reg */
+
+/* SERDES RX registers */
+#define BCMA_CORE_PCI_SERDES_RX_CTRL		1	/* Rx cntrl */
+#define  BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE	0x80	/* rxpolarity_force */
+#define  BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY	0x40	/* rxpolarity_value */
+#define BCMA_CORE_PCI_SERDES_RX_TIMER1		2	/* Rx Timer1 */
+#define BCMA_CORE_PCI_SERDES_RX_CDR		6	/* CDR */
+#define BCMA_CORE_PCI_SERDES_RX_CDRBW		7	/* CDR BW */
+
+/* SERDES PLL registers */
+#define BCMA_CORE_PCI_SERDES_PLL_CTRL		1	/* PLL control reg */
+#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN	0x4000	/* bit 14 is FREQDET on */
+
 /* PCIcore specific boardflags */
 #define BCMA_CORE_PCI_BFL_NOPCI			0x00000400 /* Board leaves PCI floating */
 
+/* PCIE Config space accessing MACROS */
+#define BCMA_CORE_PCI_CFG_BUS_SHIFT		24	/* Bus shift */
+#define BCMA_CORE_PCI_CFG_SLOT_SHIFT		19	/* Slot/Device shift */
+#define BCMA_CORE_PCI_CFG_FUN_SHIFT		16	/* Function shift */
+#define BCMA_CORE_PCI_CFG_OFF_SHIFT		0	/* Register shift */
+
+#define BCMA_CORE_PCI_CFG_BUS_MASK		0xff	/* Bus mask */
+#define BCMA_CORE_PCI_CFG_SLOT_MASK		0x1f	/* Slot/Device mask */
+#define BCMA_CORE_PCI_CFG_FUN_MASK		7	/* Function mask */
+#define BCMA_CORE_PCI_CFG_OFF_MASK		0xfff	/* Register mask */
+
+/* PCIE Root Capability Register bits (Host mode only) */
+#define BCMA_CORE_PCI_RC_CRS_VISIBILITY		0x0001
+
+struct bcma_drv_pci;
+
+#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
+struct bcma_drv_pci_host {
+	struct bcma_drv_pci *pdev;
+
+	u32 host_cfg_addr;
+	spinlock_t cfgspace_lock;
+
+	struct pci_controller pci_controller;
+	struct pci_ops pci_ops;
+	struct resource mem_resource;
+	struct resource io_resource;
+};
+#endif
+
 struct bcma_drv_pci {
 	struct bcma_device *core;
 	u8 setup_done:1;
+	u8 hostmode:1;
+
+#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
+	struct bcma_drv_pci_host *host_controller;
+#endif
 };
 
 /* Register access */
+#define pcicore_read16(pc, offset)		bcma_read16((pc)->core, offset)
 #define pcicore_read32(pc, offset)		bcma_read32((pc)->core, offset)
+#define pcicore_write16(pc, offset, val)	bcma_write16((pc)->core, offset, val)
 #define pcicore_write32(pc, offset, val)	bcma_write32((pc)->core, offset, val)
 
-extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
+extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc);
 extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
 				 struct bcma_device *core, bool enable);
+extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend);
+
+extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
+extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
 
 #endif /* LINUX_BCMA_DRIVER_PCI_H_ */
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
@@ -11,11 +11,13 @@
 #define  BCMA_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
 #define  BCMA_CLKCTLST_HWCROFF		0x00000020 /* Force HW clock request off */
 #define  BCMA_CLKCTLST_EXTRESREQ	0x00000700 /* Mask of external resource requests */
+#define  BCMA_CLKCTLST_EXTRESREQ_SHIFT	8
 #define  BCMA_CLKCTLST_HAVEALP		0x00010000 /* ALP available */
 #define  BCMA_CLKCTLST_HAVEHT		0x00020000 /* HT available */
 #define  BCMA_CLKCTLST_BP_ON_ALP	0x00040000 /* RO: running on ALP clock */
 #define  BCMA_CLKCTLST_BP_ON_HT		0x00080000 /* RO: running on HT clock */
 #define  BCMA_CLKCTLST_EXTRESST		0x07000000 /* Mask of external resource status */
+#define  BCMA_CLKCTLST_EXTRESST_SHIFT	24
 /* Is there any BCM4328 on BCMA bus? */
 #define  BCMA_CLKCTLST_4328A0_HAVEHT	0x00010000 /* 4328a0 has reversed bits */
 #define  BCMA_CLKCTLST_4328A0_HAVEALP	0x00020000 /* 4328a0 has reversed bits */
@@ -35,6 +37,7 @@
 #define  BCMA_IOST_BIST_DONE		0x8000
 #define BCMA_RESET_CTL			0x0800
 #define  BCMA_RESET_CTL_RESET		0x0001
+#define BCMA_RESET_ST			0x0804
 
 /* BCMA PCI config space registers. */
 #define BCMA_PCI_PMCSR			0x44
@@ -56,4 +59,36 @@
 #define  BCMA_PCI_GPIO_XTAL		0x40	/* PCI config space GPIO 14 for Xtal powerup */
 #define  BCMA_PCI_GPIO_PLL		0x80	/* PCI config space GPIO 15 for PLL powerdown */
 
+/* SiliconBackplane Address Map.
+ * All regions may not exist on all chips.
+ */
+#define BCMA_SOC_SDRAM_BASE		0x00000000U	/* Physical SDRAM */
+#define BCMA_SOC_PCI_MEM		0x08000000U	/* Host Mode sb2pcitranslation0 (64 MB) */
+#define BCMA_SOC_PCI_MEM_SZ		(64 * 1024 * 1024)
+#define BCMA_SOC_PCI_CFG		0x0c000000U	/* Host Mode sb2pcitranslation1 (64 MB) */
+#define BCMA_SOC_SDRAM_SWAPPED		0x10000000U	/* Byteswapped Physical SDRAM */
+#define BCMA_SOC_SDRAM_R2		0x80000000U	/* Region 2 for sdram (512 MB) */
+
+
+#define BCMA_SOC_PCI_DMA		0x40000000U	/* Client Mode sb2pcitranslation2 (1 GB) */
+#define BCMA_SOC_PCI_DMA2		0x80000000U	/* Client Mode sb2pcitranslation2 (1 GB) */
+#define BCMA_SOC_PCI_DMA_SZ		0x40000000U	/* Client Mode sb2pcitranslation2 size in bytes */
+#define BCMA_SOC_PCIE_DMA_L32		0x00000000U	/* PCIE Client Mode sb2pcitranslation2
+							 * (2 ZettaBytes), low 32 bits
+							 */
+#define BCMA_SOC_PCIE_DMA_H32		0x80000000U	/* PCIE Client Mode sb2pcitranslation2
+							 * (2 ZettaBytes), high 32 bits
+							 */
+
+#define BCMA_SOC_PCI1_MEM		0x40000000U	/* Host Mode sb2pcitranslation0 (64 MB) */
+#define BCMA_SOC_PCI1_CFG		0x44000000U	/* Host Mode sb2pcitranslation1 (64 MB) */
+#define BCMA_SOC_PCIE1_DMA_H32		0xc0000000U	/* PCIE Client Mode sb2pcitranslation2
+							 * (2 ZettaBytes), high 32 bits
+							 */
+
+#define BCMA_SOC_FLASH1			0x1fc00000	/* MIPS Flash Region 1 */
+#define BCMA_SOC_FLASH1_SZ		0x00400000	/* MIPS Size of Flash Region 1 */
+#define BCMA_SOC_FLASH2			0x1c000000	/* Flash Region 2 (region 1 shadowed here) */
+#define BCMA_SOC_FLASH2_SZ		0x02000000	/* Size of Flash Region 2 */
+
 #endif /* LINUX_BCMA_REGS_H_ */
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4618,7 +4618,7 @@ static int b43_wireless_core_init(struct
 	switch (dev->dev->bus_type) {
 #ifdef CONFIG_B43_BCMA
 	case B43_BUS_BCMA:
-		bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci,
+		bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0],
 				      dev->dev->bdev, true);
 		break;
 #endif
--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
@@ -533,7 +533,7 @@ ai_buscore_setup(struct si_info *sii, st
 
 	/* fixup necessary chip/core configurations */
 	if (!sii->pch) {
-		sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci.core);
+		sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci[0].core);
 		if (sii->pch == NULL)
 			return false;
 	}